; HEADER_BLOCK_START ; generated by Flash Studio 1.7.9 on 2026-09-27 at 04:47:10 ; total layer number: 176 ; filament_density: 1.24 ; filament_diameter: 1.75 ; max_z_height: 35.20 ; filament: 1 ; HEADER_BLOCK_END ; filament used [mm] = 12081.53 ; filament used [cm3] = 29.06 ; filament used [g] = 36.03 ; filament cost = 0.72 ; total filament used [g] = 36.03 ; total filament cost = 0.72 ; total layers count = 176 ; estimated printing time (normal mode) = 1h 21m 1s ; estimated first layer printing time (normal mode) = 14s ; CONFIG_BLOCK_START ; accel_to_decel_enable = 0 ; accel_to_decel_factor = 50% ; activate_air_filtration = 0 ; activate_chamber_temp_control = 0 ; adaptive_bed_mesh_margin = 0 ; adaptive_pressure_advance = 0 ; adaptive_pressure_advance_bridges = 0 ; adaptive_pressure_advance_model = "0,0,0\n0,0,0" ; adaptive_pressure_advance_overhangs = 0 ; additional_cooling_fan_speed = 100 ; align_infill_direction_to_model = 0 ; alternate_extra_wall = 0 ; auxiliary_fan = 1 ; bbl_calib_mark_logo = 1 ; bbl_use_printhost = 0 ; bed_custom_model = ; bed_custom_texture = ; bed_exclude_area = 0x0 ; bed_mesh_max = 99999,99999 ; bed_mesh_min = -99999,-99999 ; bed_mesh_probe_distance = 50,50 ; bed_temperature_formula = by_highest_temp ; before_layer_change_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z] ; best_object_pos = 0.5,0.5 ; bottom_shell_layers = 4 ; bottom_shell_thickness = 0 ; bottom_solid_infill_flow_ratio = 1 ; bottom_surface_density = 100% ; bottom_surface_pattern = monotonic ; bridge_acceleration = 50% ; bridge_angle = 0 ; bridge_density = 100% ; bridge_flow = 1 ; bridge_no_support = 0 ; bridge_speed = 25 ; brim_ears_detection_length = 1 ; brim_ears_max_angle = 125 ; brim_object_gap = 0.1 ; brim_type = outer_only ; brim_use_efc_outline = 0 ; brim_width = 5 ; calib_flowrate_topinfill_special_order = 0 ; chamber_temperature = 0 ; change_extrusion_role_gcode = ; change_filament_gcode = ; close_fan_the_first_x_layers = 1 ; compatible_printers_condition = ; complete_print_exhaust_fan_speed = 80 ; cool_plate_temp = 60 ; cool_plate_temp_initial_layer = 55 ; cooling_tube_length = 0 ; cooling_tube_retraction = 0 ; counterbore_hole_bridging = none ; curr_bed_type = Textured PEI Plate ; default_acceleration = 10000 ; default_filament_colour = "" ; default_filament_profile = "Flashforge Generic PLA" ; default_jerk = 0 ; default_junction_deviation = 0 ; default_print_profile = 0.20mm Standard @Flashforge AD5M 0.4 Nozzle ; deretraction_speed = 30 ; detect_narrow_internal_solid_infill = 1 ; detect_overhang_wall = 1 ; detect_thin_wall = 0 ; different_settings_to_system = bottom_shell_layers;brim_type;brim_width;enable_support;initial_layer_print_height;layer_height;sparse_infill_density;sparse_infill_pattern;top_shell_layers;wall_loops;xy_hole_compensation;; ; disable_m73 = 0 ; dont_filter_internal_bridges = disabled ; dont_slow_down_outer_wall = 0 ; draft_shield = disabled ; during_print_exhaust_fan_speed = 60 ; elefant_foot_compensation = 0.15 ; elefant_foot_compensation_layers = 1 ; emit_machine_limits_to_gcode = 1 ; enable_arc_fitting = 1 ; enable_extra_bridge_layer = disabled ; enable_filament_ramming = 0 ; enable_long_retraction_when_cut = 0 ; enable_overhang_bridge_fan = 1 ; enable_overhang_speed = 1 ; enable_power_loss_recovery = printer_configuration ; enable_pressure_advance = 1 ; enable_prime_tower = 0 ; enable_support = 0 ; enable_tower_interface_cooldown_during_tower = 0 ; enable_tower_interface_features = 0 ; enable_wrapping_detection = 0 ; enforce_support_layers = 0 ; eng_plate_temp = 60 ; eng_plate_temp_initial_layer = 55 ; ensure_vertical_shell_thickness = ensure_all ; exclude_object = 0 ; extra_loading_move = 0 ; extra_perimeters_on_overhangs = 0 ; extra_solid_infills = ; extruder_ams_count = ; extruder_clearance_height_to_lid = 150 ; extruder_clearance_height_to_rod = 27 ; extruder_clearance_radius = 76 ; extruder_colour = #F2754E ; extruder_offset = 0x0 ; extruder_printable_area = ; extruder_printable_height = 0 ; extruder_type = Direct Drive ; extrusion_rate_smoothing_external_perimeter_only = 0 ; fan_cooling_layer_time = 100 ; fan_kickstart = 0 ; fan_max_speed = 100 ; fan_min_speed = 100 ; fan_speedup_overhangs = 1 ; fan_speedup_time = 0 ; filament_adaptive_volumetric_speed = 0 ; filament_adhesiveness_category = 0 ; filament_change_length = 0 ; filament_colour = #F2754E ; filament_cooling_final_speed = 3.4 ; filament_cooling_initial_speed = 2.2 ; filament_cooling_moves = 4 ; filament_cost = 20 ; filament_density = 1.24 ; filament_diameter = 1.75 ; filament_end_gcode = "; filament end gcode\n" ; filament_extruder_variant = "Direct Drive Standard" ; filament_flow_ratio = 0.98 ; filament_flush_temp = 0 ; filament_flush_volumetric_speed = 0 ; filament_ids = GFL99 ; filament_is_support = 0 ; filament_loading_speed = 28 ; filament_loading_speed_start = 3 ; filament_map = 1 ; filament_map_mode = Auto For Flush ; filament_max_volumetric_speed = 25 ; filament_minimal_purge_on_wipe_tower = 15 ; filament_multitool_ramming = 0 ; filament_multitool_ramming_flow = 10 ; filament_multitool_ramming_volume = 10 ; filament_notes = "" ; filament_printable = 3 ; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ; filament_self_index = 1 ; filament_settings_id = "Flashforge Generic PLA" ; filament_shrink = 100% ; filament_shrinkage_compensation_z = 100% ; filament_soluble = 0 ; filament_stamping_distance = 0 ; filament_stamping_loading_speed = 0 ; filament_start_gcode = "; filament start gcode\n;right_extruder_material: PLA\n" ; filament_toolchange_delay = 0 ; filament_tower_interface_pre_extrusion_dist = 10 ; filament_tower_interface_pre_extrusion_length = 0 ; filament_tower_interface_print_temp = -1 ; filament_tower_interface_purge_volume = 20 ; filament_tower_ironing_area = 4 ; filament_type = PLA ; filament_unloading_speed = 90 ; filament_unloading_speed_start = 100 ; filament_vendor = Flashforge ; file_start_gcode = ; filename_format = {input_filename_base}.gcode ; fill_multiline = 1 ; filter_out_gap_fill = 0.5 ; first_layer_flow_ratio = 1 ; first_layer_print_sequence = 0 ; flush_into_infill = 0 ; flush_into_objects = 0 ; flush_into_support = 1 ; flush_multiplier = 0.3 ; flush_volumes_matrix = 0,280,280,280,280,0,280,280,280,280,0,280,280,280,280,0 ; flush_volumes_vector = 140,140,140,140,140,140,140,140 ; full_fan_speed_layer = 0 ; fuzzy_skin = disabled_fuzzy ; fuzzy_skin_first_layer = 0 ; fuzzy_skin_mode = displacement ; fuzzy_skin_noise_type = classic ; fuzzy_skin_octaves = 4 ; fuzzy_skin_persistence = 0.5 ; fuzzy_skin_point_distance = 0.3 ; fuzzy_skin_scale = 1 ; fuzzy_skin_thickness = 0.2 ; gap_fill_flow_ratio = 1 ; gap_fill_target = nowhere ; gap_infill_speed = 200 ; gcode_add_line_number = 0 ; gcode_comments = 0 ; gcode_flavor = klipper ; gcode_label_objects = 0 ; grab_length = 0 ; has_scarf_joint_seam = 0 ; head_wrap_detect_zone = ; high_current_on_filament_swap = 0 ; hole_to_polyhole = 0 ; hole_to_polyhole_threshold = 0.01 ; hole_to_polyhole_twisted = 1 ; host_type = octoprint ; hot_plate_temp = 50 ; hot_plate_temp_initial_layer = 55 ; idle_temperature = 0 ; independent_support_layer_height = 1 ; infill_anchor = 400% ; infill_anchor_max = 20 ; infill_combination = 0 ; infill_combination_max_layer_height = 100% ; infill_direction = 45 ; infill_jerk = 9 ; infill_lock_depth = 1 ; infill_overhang_angle = 60 ; infill_shift_step = 0.4 ; infill_wall_overlap = 50% ; inherits_group = ;; ; initial_layer_acceleration = 500 ; initial_layer_infill_speed = 80 ; initial_layer_jerk = 9 ; initial_layer_line_width = 0.5 ; initial_layer_min_bead_width = 85% ; initial_layer_print_height = 0.2 ; initial_layer_speed = 50 ; initial_layer_travel_speed = 100% ; inner_wall_acceleration = 5000 ; inner_wall_flow_ratio = 1 ; inner_wall_jerk = 9 ; inner_wall_line_width = 0.45 ; inner_wall_speed = 300 ; interface_shells = 0 ; interlocking_beam = 0 ; interlocking_beam_layer_count = 2 ; interlocking_beam_width = 0.8 ; interlocking_boundary_avoidance = 2 ; interlocking_depth = 2 ; interlocking_orientation = 22.5 ; internal_bridge_angle = 0 ; internal_bridge_density = 100% ; internal_bridge_fan_speed = -1 ; internal_bridge_flow = 1 ; internal_bridge_speed = 50 ; internal_solid_infill_acceleration = 7000 ; internal_solid_infill_flow_ratio = 1 ; internal_solid_infill_line_width = 0.42 ; internal_solid_infill_pattern = monotonic ; internal_solid_infill_speed = 250 ; ironing_angle = 0 ; ironing_angle_fixed = 0 ; ironing_fan_speed = -1 ; ironing_flow = 15% ; ironing_inset = 0 ; ironing_pattern = rectilinear ; ironing_spacing = 0.1 ; ironing_speed = 15 ; ironing_type = no ironing ; is_infill_first = 0 ; lateral_lattice_angle_1 = -45 ; lateral_lattice_angle_2 = 45 ; layer_change_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] ; layer_height = 0.2 ; line_width = 0.42 ; long_retractions_when_cut = 0 ; long_retractions_when_ec = 0 ; machine_end_gcode = G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature ; machine_load_filament_time = 0 ; machine_max_acceleration_e = 5000,5000 ; machine_max_acceleration_extruding = 20000,20000 ; machine_max_acceleration_retracting = 5000,5000 ; machine_max_acceleration_travel = 20000,20000 ; machine_max_acceleration_x = 20000,20000 ; machine_max_acceleration_y = 20000,20000 ; machine_max_acceleration_z = 500,500 ; machine_max_jerk_e = 2.5,2.5 ; machine_max_jerk_x = 9,9 ; machine_max_jerk_y = 9,9 ; machine_max_jerk_z = 3,3 ; machine_max_junction_deviation = 0.01 ; machine_max_speed_e = 30,30 ; machine_max_speed_x = 600,600 ; machine_max_speed_y = 600,600 ; machine_max_speed_z = 20,20 ; machine_min_extruding_rate = 0,0 ; machine_min_travel_rate = 0,0 ; machine_pause_gcode = PAUSE ; machine_start_gcode = M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-0.2 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0 ; machine_tool_change_time = 0 ; machine_unload_filament_time = 0 ; make_overhang_printable = 0 ; make_overhang_printable_angle = 55 ; make_overhang_printable_hole_size = 0 ; manual_filament_change = 0 ; master_extruder_id = 1 ; max_bridge_length = 10 ; max_layer_height = 0.28 ; max_resonance_avoidance_speed = 120 ; max_travel_detour_distance = 0 ; max_volumetric_extrusion_rate_slope = 0 ; max_volumetric_extrusion_rate_slope_segment_length = 3 ; min_bead_width = 85% ; min_feature_size = 25% ; min_layer_height = 0.08 ; min_length_factor = 0.5 ; min_resonance_avoidance_speed = 70 ; min_skirt_length = 0 ; min_width_top_surface = 300% ; minimum_sparse_infill_area = 15 ; mmu_segmented_region_interlocking_depth = 0 ; mmu_segmented_region_max_width = 0 ; notes = ; nozzle_diameter = 0.4 ; nozzle_flush_dataset = 0 ; nozzle_height = 2.5 ; nozzle_hrc = 0 ; nozzle_temperature = 220 ; nozzle_temperature_initial_layer = 220 ; nozzle_temperature_range_high = 230 ; nozzle_temperature_range_low = 190 ; nozzle_type = stainless_steel ; nozzle_volume = 0 ; nozzle_volume_type = Standard ; only_one_wall_first_layer = 0 ; only_one_wall_top = 0 ; ooze_prevention = 0 ; other_layers_print_sequence = 0 ; other_layers_print_sequence_nums = 0 ; outer_wall_acceleration = 5000 ; outer_wall_flow_ratio = 1 ; outer_wall_jerk = 9 ; outer_wall_line_width = 0.42 ; outer_wall_speed = 200 ; overhang_1_4_speed = 0 ; overhang_2_4_speed = 40 ; overhang_3_4_speed = 20 ; overhang_4_4_speed = 10 ; overhang_fan_speed = 100 ; overhang_fan_threshold = 50% ; overhang_flow_ratio = 1 ; overhang_reverse = 0 ; overhang_reverse_internal_only = 0 ; overhang_reverse_threshold = 50% ; parking_pos_retraction = 0 ; pellet_modded_printer = 0 ; physical_extruder_map = 0 ; post_process = ; precise_outer_wall = 1 ; precise_z_height = 0 ; preferred_orientation = 0 ; preheat_steps = 1 ; preheat_time = 30 ; pressure_advance = 0.025 ; prime_tower_brim_width = 3 ; prime_tower_enable_framework = 0 ; prime_tower_flat_ironing = 0 ; prime_tower_infill_gap = 150% ; prime_tower_skip_points = 1 ; prime_tower_width = 60 ; prime_volume = 45 ; print_compatible_printers = "Flashforge Adventurer 5M 0.4 Nozzle" ; print_extruder_id = 1 ; print_extruder_variant = "Direct Drive Standard" ; print_flow_ratio = 1 ; print_order = default ; print_sequence = by layer ; print_settings_id = 0.20mm Standard @Flashforge AD5M 0.4 Nozzle ; printable_area = -110x-110,110x-110,110x110,-110x110 ; printable_height = 220 ; printer_extruder_id = 1 ; printer_extruder_variant = "Direct Drive Standard" ; printer_model = Flashforge Adventurer 5M ; printer_notes = ; printer_settings_id = Flashforge Adventurer 5M 0.4 Nozzle ; printer_structure = undefine ; printer_technology = FFF ; printer_variant = 0.4 ; printhost_authorization_type = key ; printhost_ssl_ignore_revoke = 0 ; printing_by_object_gcode = ; purge_in_prime_tower = 1 ; raft_contact_distance = 0.1 ; raft_expansion = 1.5 ; raft_first_layer_density = 90% ; raft_first_layer_expansion = 2 ; raft_layers = 0 ; reduce_crossing_wall = 0 ; reduce_fan_stop_start_freq = 1 ; reduce_infill_retraction = 1 ; required_nozzle_HRC = 0 ; resolution = 0.012 ; resonance_avoidance = 0 ; retract_before_wipe = 100% ; retract_length_toolchange = 2 ; retract_lift_above = 0 ; retract_lift_below = 0 ; retract_lift_enforce = All Surfaces ; retract_restart_extra = 0 ; retract_restart_extra_toolchange = 0 ; retract_when_changing_layer = 1 ; retraction_distances_when_cut = 18 ; retraction_distances_when_ec = 10 ; retraction_length = 0.8 ; retraction_minimum_travel = 1 ; retraction_speed = 30 ; role_based_wipe_speed = 1 ; scan_first_layer = 0 ; scarf_angle_threshold = 155 ; scarf_joint_flow_ratio = 1 ; scarf_joint_speed = 100% ; scarf_overhang_threshold = 40% ; seam_gap = 10% ; seam_position = aligned ; seam_slope_conditional = 0 ; seam_slope_entire_loop = 0 ; seam_slope_inner_walls = 0 ; seam_slope_min_length = 20 ; seam_slope_start_height = 0 ; seam_slope_steps = 10 ; seam_slope_type = none ; set_other_flow_ratios = 0 ; silent_mode = 0 ; single_extruder_multi_material = 0 ; single_extruder_multi_material_priming = 0 ; single_loop_draft_shield = 0 ; skeleton_infill_density = 25% ; skeleton_infill_line_width = 100% ; skin_infill_density = 25% ; skin_infill_depth = 2 ; skin_infill_line_width = 100% ; skirt_distance = 2 ; skirt_height = 1 ; skirt_loops = 0 ; skirt_speed = 50 ; skirt_start_angle = -135 ; skirt_type = combined ; slice_closing_radius = 0.049 ; slicing_mode = regular ; slow_down_for_layer_cooling = 1 ; slow_down_layer_time = 6 ; slow_down_layers = 1 ; slow_down_min_speed = 20 ; slowdown_for_curled_perimeters = 1 ; small_area_infill_flow_compensation = 0 ; small_area_infill_flow_compensation_model = 0,0;"\n0.2,0.4444";"\n0.4,0.6145";"\n0.6,0.7059";"\n0.8,0.7619";"\n1.5,0.8571";"\n2,0.8889";"\n3,0.9231";"\n5,0.9520";"\n10,1" ; small_perimeter_speed = 50% ; small_perimeter_threshold = 0 ; solid_infill_direction = 45 ; solid_infill_filament = 1 ; solid_infill_rotate_template = ; sparse_infill_acceleration = 100% ; sparse_infill_density = 20% ; sparse_infill_filament = 1 ; sparse_infill_flow_ratio = 1 ; sparse_infill_line_width = 0.45 ; sparse_infill_pattern = gyroid ; sparse_infill_rotate_template = ; sparse_infill_speed = 270 ; spiral_finishing_flow_ratio = 0 ; spiral_mode = 0 ; spiral_mode_max_xy_smoothing = 200% ; spiral_mode_smooth = 0 ; spiral_starting_flow_ratio = 0 ; staggered_inner_seams = 0 ; standby_temperature_delta = -5 ; start_end_points = 30x-3,54x245 ; supertack_plate_temp = 35 ; supertack_plate_temp_initial_layer = 35 ; support_air_filtration = 1 ; support_angle = 0 ; support_base_pattern = rectilinear ; support_base_pattern_spacing = 2.5 ; support_bottom_interface_spacing = 0.5 ; support_bottom_z_distance = 0.18 ; support_chamber_temp_control = 1 ; support_critical_regions_only = 0 ; support_expansion = 0 ; support_filament = 0 ; support_flow_ratio = 1 ; support_interface_bottom_layers = 2 ; support_interface_filament = 0 ; support_interface_flow_ratio = 1 ; support_interface_loop_pattern = 0 ; support_interface_not_for_body = 1 ; support_interface_pattern = auto ; support_interface_spacing = 0.5 ; support_interface_speed = 80 ; support_interface_top_layers = 2 ; support_ironing = 0 ; support_ironing_flow = 10% ; support_ironing_pattern = rectilinear ; support_ironing_spacing = 0.1 ; support_line_width = 0.42 ; support_material_interface_fan_speed = 100 ; support_multi_bed_types = 1 ; support_object_first_layer_gap = 0.2 ; support_object_skip_flush = 0 ; support_object_xy_distance = 0.3 ; support_on_build_plate_only = 0 ; support_remove_small_overhang = 1 ; support_speed = 150 ; support_style = default ; support_threshold_angle = 30 ; support_threshold_overlap = 50% ; support_top_z_distance = 0.18 ; support_type = normal(auto) ; symmetric_infill_y_axis = 0 ; temperature_vitrification = 60 ; template_custom_gcode = ; textured_cool_plate_temp = 40 ; textured_cool_plate_temp_initial_layer = 40 ; textured_plate_temp = 60 ; textured_plate_temp_initial_layer = 55 ; thick_bridges = 0 ; thick_internal_bridges = 1 ; thumbnails = 140x110/PNG ; thumbnails_format = PNG ; time_cost = 0 ; time_lapse_gcode = ; timelapse_type = 0 ; top_bottom_infill_wall_overlap = 25% ; top_shell_layers = 5 ; top_shell_thickness = 1 ; top_solid_infill_flow_ratio = 1 ; top_surface_acceleration = 2000 ; top_surface_density = 100% ; top_surface_jerk = 9 ; top_surface_line_width = 0.42 ; top_surface_pattern = monotonicline ; top_surface_speed = 200 ; travel_acceleration = 10000 ; travel_jerk = 12 ; travel_slope = 3 ; travel_speed = 500 ; travel_speed_z = 0 ; tree_support_angle_slow = 25 ; tree_support_auto_brim = 1 ; tree_support_branch_angle = 45 ; tree_support_branch_angle_organic = 40 ; tree_support_branch_diameter = 5 ; tree_support_branch_diameter_angle = 5 ; tree_support_branch_diameter_organic = 2 ; tree_support_branch_distance = 5 ; tree_support_branch_distance_organic = 1 ; tree_support_brim_width = 3 ; tree_support_tip_diameter = 0.8 ; tree_support_top_rate = 30% ; tree_support_wall_count = 0 ; upward_compatible_machine = ; use_firmware_retraction = 0 ; use_relative_e_distances = 1 ; volumetric_speed_coefficients = "" ; wall_direction = auto ; wall_distribution_count = 1 ; wall_filament = 1 ; wall_generator = classic ; wall_loops = 3 ; wall_sequence = inner wall/outer wall ; wall_transition_angle = 10 ; wall_transition_filter_deviation = 25% ; wall_transition_length = 100% ; wipe = 1 ; wipe_before_external_loop = 0 ; wipe_distance = 2 ; wipe_on_loops = 0 ; wipe_speed = 200 ; wipe_tower_bridging = 10 ; wipe_tower_cone_angle = 30 ; wipe_tower_extra_flow = 100% ; wipe_tower_extra_rib_length = 0 ; wipe_tower_extra_spacing = 100% ; wipe_tower_filament = 0 ; wipe_tower_fillet_wall = 1 ; wipe_tower_max_purge_speed = 90 ; wipe_tower_no_sparse_layers = 0 ; wipe_tower_rib_width = 8 ; wipe_tower_rotation_angle = 0 ; wipe_tower_type = type1 ; wipe_tower_wall_type = rectangle ; wipe_tower_x = 15.000 ; wipe_tower_x = 15 ; wipe_tower_y = 220.000 ; wipe_tower_y = 220 ; wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70 ; wrapping_detection_gcode = ; wrapping_detection_layers = 20 ; wrapping_exclude_area = ; xy_contour_compensation = 0 ; xy_hole_compensation = 0 ; z_hop = 0.4 ; z_hop_types = Auto Lift ; z_offset = 0 ; first_layer_bed_temperature = 55 ; bed_shape = -110x-110,110x-110,110x110,-110x110 ; first_layer_temperature = 220 ; first_layer_height = 0.200 ; CONFIG_BLOCK_END ; external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; EXECUTABLE_BLOCK_START M73 P0 R81 M106 S0 M106 P2 S0 ;TYPE:Custom M190 S55 M104 S220 G90 M83 G1 Z5 F6000 G1 E-0.2 F800 G1 X110 Y-110 F6000 G1 E2 F800 G1 Y-110 X55 Z0.25 F4800 G1 X-55 E8 F2400 M73 P0 R80 G1 Y-109.6 F2400 G1 X55 E5 F2400 G1 Y-110 X55 Z0.45 F4800 G1 X-55 E8 F2400 G1 Y-109.6 F2400 G1 X55 E5 F2400 G92 E0 G90 G21 M83 ; use relative distances for extrusion ; filament start gcode ;right_extruder_material: PLA SET_PRESSURE_ADVANCE ADVANCE=0.025; Override pressure advance value M106 S0 M106 P2 S0 ;LAYER_CHANGE ;Z:0.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.2 G1 E-.8 F1800 ;AFTER_LAYER_CHANGE ;0.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=500 G1 X42.78 Y-.145 F30000 G1 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Brim ;WIDTH:0.5 G1 F3000 G1 X42.779 Y-.412 E.00997 G1 X42.83 Y-.956 E.02034 G1 X42.998 Y-1.813 E.03254 G1 X43.155 Y-2.336 E.02034 G1 X43.486 Y-3.144 E.03254 G1 X43.742 Y-3.627 E.02033 G1 X44.225 Y-4.355 E.03254 G1 X44.57 Y-4.778 E.02033 G1 X45.185 Y-5.398 E.03254 G1 X45.606 Y-5.746 E.02034 G1 X46.331 Y-6.233 E.03254 G1 X46.812 Y-6.492 E.02033 G1 X47.618 Y-6.829 E.03254 G1 X48.139 Y-6.99 E.02033 G1 X48.996 Y-7.163 E.03254 G1 X49.539 Y-7.218 E.02033 G1 X50.412 Y-7.221 E.03254 G1 X50.954 Y-7.17 E.02027 G1 X51.809 Y-7.003 E.03244 G1 X52.334 Y-6.846 E.02039 G1 X53.144 Y-6.514 E.03263 G1 X53.627 Y-6.258 E.02034 G1 X54.355 Y-5.775 E.03254 G1 X54.778 Y-5.43 E.02033 G1 X55.398 Y-4.815 E.03254 G1 X55.746 Y-4.394 E.02033 G1 X56.233 Y-3.669 E.03254 G1 X56.492 Y-3.188 E.02033 G1 X56.829 Y-2.382 E.03254 G1 X56.99 Y-1.861 E.02033 G1 X57.163 Y-1.004 E.03254 G1 X57.218 Y-.461 E.02033 G1 X57.221 Y.412 E.03254 G1 X57.17 Y.956 E.02034 G1 X57.002 Y1.813 E.03254 G1 X56.845 Y2.336 E.02033 G1 X56.514 Y3.144 E.03254 G1 X56.258 Y3.627 E.02033 G1 X55.775 Y4.355 E.03254 G1 X55.43 Y4.778 E.02033 G1 X54.815 Y5.398 E.03254 G1 X54.394 Y5.746 E.02034 G1 X53.669 Y6.233 E.03254 G1 X53.188 Y6.492 E.02033 G1 X52.382 Y6.829 E.03254 G1 X51.861 Y6.99 E.02033 G1 X51.004 Y7.163 E.03254 G1 X50.461 Y7.218 E.02033 G1 X49.588 Y7.221 E.03254 G1 X49.044 Y7.17 E.02033 G1 X48.187 Y7.002 E.03254 G1 X47.664 Y6.845 E.02033 G1 X46.856 Y6.514 E.03254 G1 X46.373 Y6.258 E.02033 G1 X45.645 Y5.775 E.03254 G1 X45.222 Y5.43 E.02033 G1 X44.602 Y4.815 E.03254 G1 X44.254 Y4.394 E.02033 G1 X43.767 Y3.669 E.03254 G1 X43.508 Y3.188 E.02033 G1 X43.171 Y2.382 E.03254 G1 X43.01 Y1.861 E.02033 G1 X42.837 Y1.004 E.03254 G1 X42.782 Y.461 E.02033 G1 X42.78 Y-.105 E.02108 G1 X43.237 Y-.106 F30000 G1 F3000 G1 X43.237 Y-.398 E.01089 G1 X43.285 Y-.897 E.01866 G1 X43.444 Y-1.71 E.03086 G1 X43.589 Y-2.19 E.01866 G1 X43.904 Y-2.956 E.03086 G1 X44.139 Y-3.398 E.01866 G1 X44.598 Y-4.089 E.03086 G1 X44.915 Y-4.477 E.01866 G1 X45.499 Y-5.064 E.03086 G1 X45.886 Y-5.383 E.01866 G1 X46.574 Y-5.845 E.03086 G1 X47.015 Y-6.082 E.01866 G1 X47.78 Y-6.401 E.03087 G1 X48.259 Y-6.547 E.01866 G1 X49.071 Y-6.711 E.03086 G1 X49.57 Y-6.761 E.01866 G1 X50.398 Y-6.763 E.03086 G1 X50.895 Y-6.716 E.0186 G1 X51.706 Y-6.557 E.03078 G1 X52.187 Y-6.412 E.01872 G1 X52.956 Y-6.096 E.03095 G1 X53.398 Y-5.861 E.01866 G1 X54.089 Y-5.402 E.03087 G1 X54.477 Y-5.085 E.01866 G1 X55.064 Y-4.501 E.03086 G1 X55.383 Y-4.114 E.01866 G1 X55.845 Y-3.427 E.03086 G1 X56.082 Y-2.985 E.01866 G1 X56.401 Y-2.22 E.03086 G1 X56.547 Y-1.741 E.01866 G1 X56.711 Y-.929 E.03086 G1 X56.761 Y-.43 E.01866 G1 X56.763 Y.398 E.03086 G1 X56.715 Y.897 E.01866 G1 X56.556 Y1.71 E.03086 G1 X56.411 Y2.19 E.01866 G1 X56.096 Y2.956 E.03086 G1 X55.861 Y3.398 E.01866 G1 X55.402 Y4.089 E.03086 G1 X55.085 Y4.477 E.01866 G1 X54.501 Y5.064 E.03086 G1 X54.114 Y5.383 E.01866 G1 X53.426 Y5.845 E.03086 G1 X52.985 Y6.082 E.01866 G1 X52.22 Y6.401 E.03087 G1 X51.741 Y6.547 E.01866 G1 X50.929 Y6.711 E.03086 G1 X50.43 Y6.761 E.01866 G1 X49.602 Y6.763 E.03086 G1 X49.103 Y6.715 E.01866 G1 X48.29 Y6.556 E.03086 G1 X47.81 Y6.411 E.01866 G1 X47.044 Y6.096 E.03086 G1 X46.602 Y5.861 E.01866 G1 X45.911 Y5.402 E.03086 G1 X45.523 Y5.085 E.01866 G1 X44.936 Y4.501 E.03086 G1 X44.617 Y4.114 E.01866 G1 X44.155 Y3.426 E.03086 G1 X43.918 Y2.985 E.01866 G1 X43.599 Y2.22 E.03086 G1 X43.453 Y1.741 E.01866 G1 X43.289 Y.929 E.03086 G1 X43.239 Y.43 E.01866 G1 X43.237 Y-.066 E.01849 G1 X43.695 Y-.067 F30000 G1 F3000 G1 X43.694 Y-.383 E.0118 G1 X43.739 Y-.837 E.01698 G1 X43.89 Y-1.606 E.02919 G1 X44.022 Y-2.043 E.01698 G1 X44.321 Y-2.767 E.02919 G1 X44.536 Y-3.17 E.01698 G1 X44.97 Y-3.822 E.02919 G1 X45.259 Y-4.175 E.01698 G1 X45.812 Y-4.73 E.02919 G1 X46.165 Y-5.019 E.01698 G1 X46.816 Y-5.456 E.02919 G1 X47.218 Y-5.671 E.01698 G1 X47.941 Y-5.972 E.02919 G1 X48.378 Y-6.105 E.01698 G1 X49.146 Y-6.259 E.02919 G1 X49.6 Y-6.304 E.01698 G1 X50.383 Y-6.306 E.02919 G1 X50.836 Y-6.261 E.01693 G1 X51.603 Y-6.11 E.02911 G1 X52.041 Y-5.978 E.01705 G1 X52.767 Y-5.679 E.02927 G1 X53.17 Y-5.464 E.01698 G1 X53.822 Y-5.03 E.02919 G1 X54.175 Y-4.741 E.01698 G1 X54.73 Y-4.188 E.02919 G1 X55.019 Y-3.835 E.01698 G1 X55.456 Y-3.184 E.02919 G1 X55.671 Y-2.782 E.01698 G1 X55.972 Y-2.059 E.02919 G1 X56.105 Y-1.622 E.01698 G1 X56.259 Y-.854 E.02919 G1 X56.304 Y-.4 E.01698 G1 X56.306 Y.383 E.02919 G1 X56.261 Y.837 E.01698 G1 X56.11 Y1.606 E.02919 G1 X55.978 Y2.043 E.01698 G1 X55.679 Y2.767 E.02919 G1 X55.464 Y3.17 E.01698 G1 X55.03 Y3.822 E.02919 G1 X54.741 Y4.175 E.01698 G1 X54.188 Y4.73 E.02919 G1 X53.835 Y5.019 E.01698 G1 X53.184 Y5.456 E.02919 G1 X52.782 Y5.671 E.01698 G1 X52.059 Y5.972 E.02919 G1 X51.622 Y6.105 E.01698 G1 X50.854 Y6.259 E.02919 G1 X50.4 Y6.304 E.01698 G1 X49.616 Y6.306 E.02919 G1 X49.163 Y6.261 E.01698 G1 X48.394 Y6.11 E.02919 G1 X47.957 Y5.978 E.01698 G1 X47.233 Y5.679 E.02919 G1 X46.83 Y5.464 E.01698 G1 X46.178 Y5.03 E.02919 G1 X45.825 Y4.741 E.01698 G1 X45.27 Y4.188 E.02919 G1 X44.981 Y3.835 E.01698 G1 X44.544 Y3.184 E.02919 G1 X44.329 Y2.782 E.01698 G1 X44.028 Y2.059 E.02919 G1 X43.895 Y1.622 E.01698 G1 X43.741 Y.854 E.02919 G1 X43.696 Y.4 E.01698 G1 X43.695 Y-.027 E.0159 G1 X44.152 Y-.027 F30000 G1 F3000 G1 X44.152 Y-.368 E.01271 G1 X44.193 Y-.777 E.0153 G1 X44.336 Y-1.502 E.02753 G1 X44.456 Y-1.895 E.0153 G1 X44.738 Y-2.578 E.02752 G1 X44.932 Y-2.94 E.0153 G1 X45.342 Y-3.555 E.02752 G1 X45.603 Y-3.873 E.0153 G1 X46.125 Y-4.396 E.02753 G1 X46.443 Y-4.656 E.0153 G1 X47.057 Y-5.067 E.02752 G1 X47.42 Y-5.26 E.0153 G1 X48.102 Y-5.544 E.02753 G1 X48.496 Y-5.663 E.0153 G1 X49.22 Y-5.807 E.02752 G1 X49.629 Y-5.847 E.01531 G1 X50.368 Y-5.848 E.02752 G1 X50.776 Y-5.807 E.01525 G1 X51.499 Y-5.664 E.02745 G1 X51.893 Y-5.544 E.01537 G1 X52.578 Y-5.262 E.0276 G1 X52.94 Y-5.068 E.0153 G1 X53.555 Y-4.658 E.02753 G1 X53.873 Y-4.397 E.0153 G1 X54.396 Y-3.875 E.02752 G1 X54.656 Y-3.557 E.01531 G1 X55.067 Y-2.943 E.02752 G1 X55.26 Y-2.58 E.01531 G1 X55.544 Y-1.898 E.02752 G1 X55.663 Y-1.504 E.0153 G1 X55.807 Y-.78 E.02752 G1 X55.847 Y-.371 E.0153 G1 X55.848 Y.368 E.02752 G1 X55.807 Y.777 E.01531 G1 X55.664 Y1.502 E.02752 G1 X55.544 Y1.895 E.01531 G1 X55.262 Y2.578 E.02752 G1 X55.068 Y2.94 E.0153 G1 X54.658 Y3.555 E.02752 G1 X54.397 Y3.873 E.0153 G1 X53.875 Y4.396 E.02752 G1 X53.557 Y4.656 E.0153 G1 X52.943 Y5.067 E.02752 G1 X52.58 Y5.26 E.0153 G1 X51.898 Y5.544 E.02753 G1 X51.504 Y5.663 E.0153 G1 X50.78 Y5.807 E.02752 G1 X50.371 Y5.847 E.01531 G1 X49.632 Y5.848 E.02752 G1 X49.223 Y5.807 E.0153 G1 X48.498 Y5.664 E.02752 G1 X48.105 Y5.544 E.0153 G1 X47.422 Y5.262 E.02752 G1 X47.06 Y5.068 E.01531 G1 X46.445 Y4.658 E.02752 G1 X46.127 Y4.397 E.01531 G1 X45.604 Y3.875 E.02752 G1 X45.344 Y3.557 E.0153 G1 X44.933 Y2.943 E.02752 G1 X44.74 Y2.58 E.01531 G1 X44.456 Y1.898 E.02752 G1 X44.337 Y1.504 E.0153 G1 X44.193 Y.78 E.02752 G1 X44.153 Y.371 E.0153 G1 X44.152 Y.013 E.01332 G1 X44.61 Y.013 F30000 G1 F3000 G1 X44.61 Y-.353 E.01362 G1 X44.647 Y-.717 E.01362 G1 X44.782 Y-1.398 E.02586 G1 X44.889 Y-1.747 E.01362 G1 X45.155 Y-2.389 E.02586 G1 X45.328 Y-2.711 E.01362 G1 X45.714 Y-3.288 E.02586 G1 X45.947 Y-3.57 E.01362 G1 X46.438 Y-4.061 E.02586 G1 X46.721 Y-4.292 E.01362 G1 X47.299 Y-4.678 E.02586 G1 X47.622 Y-4.849 E.01362 G1 X48.263 Y-5.115 E.02586 G1 X48.613 Y-5.22 E.01362 G1 X49.294 Y-5.355 E.02586 G1 X49.658 Y-5.39 E.01362 G1 X50.353 Y-5.39 E.02586 G1 X50.715 Y-5.353 E.01357 G1 X51.394 Y-5.218 E.02578 G1 X51.746 Y-5.111 E.01369 G1 X52.389 Y-4.845 E.02593 G1 X52.711 Y-4.672 E.01361 G1 X53.288 Y-4.286 E.02586 G1 X53.57 Y-4.053 E.01362 G1 X54.061 Y-3.562 E.02586 G1 X54.292 Y-3.279 E.01362 G1 X54.678 Y-2.701 E.02586 G1 X54.849 Y-2.378 E.01362 G1 X55.115 Y-1.737 E.02586 G1 X55.22 Y-1.387 E.01362 G1 X55.355 Y-.706 E.02586 G1 X55.39 Y-.342 E.01362 G1 X55.39 Y.353 E.02586 G1 X55.353 Y.717 E.01362 G1 X55.218 Y1.397 E.02586 G1 X55.111 Y1.747 E.01362 G1 X54.845 Y2.389 E.02586 G1 X54.672 Y2.711 E.01362 G1 X54.286 Y3.288 E.02586 G1 X54.053 Y3.57 E.01362 G1 X53.562 Y4.061 E.02586 G1 X53.279 Y4.292 E.01362 G1 X52.701 Y4.678 E.02586 G1 X52.378 Y4.849 E.01362 G1 X51.737 Y5.115 E.02586 G1 X51.387 Y5.22 E.01362 G1 X50.706 Y5.355 E.02586 G1 X50.342 Y5.39 E.01362 G1 X49.647 Y5.39 E.02586 G1 X49.283 Y5.353 E.01362 G1 X48.602 Y5.218 E.02586 G1 X48.253 Y5.111 E.01362 G1 X47.611 Y4.845 E.02586 G1 X47.289 Y4.672 E.01362 G1 X46.712 Y4.286 E.02586 G1 X46.43 Y4.053 E.01362 G1 X45.939 Y3.562 E.02586 G1 X45.708 Y3.279 E.01362 G1 X45.322 Y2.701 E.02586 G1 X45.151 Y2.378 E.01362 G1 X44.885 Y1.737 E.02586 G1 X44.78 Y1.387 E.01362 G1 X44.645 Y.706 E.02586 G1 X44.61 Y.342 E.01362 G1 X44.61 Y.053 E.01074 G1 X45.076 Y.069 F30000 G1 F3000 G1 X45.1 Y-.651 E.02684 G1 X45.321 Y-1.595 E.03609 G1 X45.722 Y-2.477 E.03609 G1 X46.288 Y-3.264 E.03609 G1 X46.996 Y-3.925 E.03609 G1 X47.819 Y-4.436 E.03609 G1 X48.727 Y-4.776 E.03609 G1 X49.683 Y-4.933 E.03609 G1 X50.649 Y-4.9 E.03602 G1 X51.594 Y-4.679 E.03612 G1 X52.476 Y-4.278 E.03612 G1 X53.264 Y-3.712 E.0361 G1 X53.925 Y-3.004 E.03609 G1 X54.436 Y-2.181 E.03609 G1 X54.776 Y-1.273 E.03609 G1 X54.933 Y-.317 E.03609 G1 X54.9 Y.651 E.03609 G1 X54.679 Y1.595 E.03609 G1 X54.278 Y2.477 E.03609 G1 X53.712 Y3.264 E.03609 G1 X53.004 Y3.925 E.03609 G1 X52.181 Y4.436 E.03609 G1 X51.273 Y4.776 E.03609 G1 X50.317 Y4.933 E.03609 G1 X49.349 Y4.9 E.03609 G1 X48.405 Y4.679 E.03609 G1 X47.523 Y4.278 E.03609 G1 X46.736 Y3.712 E.03609 G1 X46.075 Y3.004 E.03609 G1 X45.564 Y2.181 E.03609 G1 X45.224 Y1.273 E.03609 G1 X45.067 Y.317 E.03609 G1 X45.074 Y.109 E.00776 G1 X45.522 Y.129 F30000 G1 F3000 G1 X45.557 Y-.642 E.02877 G1 X45.768 Y-1.497 E.03278 G1 X46.141 Y-2.294 E.03278 G1 X46.663 Y-3.002 E.03278 G1 X47.313 Y-3.596 E.03278 G1 X48.066 Y-4.051 E.03278 G1 X48.893 Y-4.35 E.03278 G1 X49.763 Y-4.483 E.03278 G1 X50.641 Y-4.443 E.03271 G1 X51.496 Y-4.232 E.03281 G1 X52.293 Y-3.859 E.0328 G1 X53.002 Y-3.337 E.03278 G1 X53.596 Y-2.687 E.03278 G1 X54.051 Y-1.934 E.03278 G1 X54.35 Y-1.107 E.03278 G1 X54.483 Y-.237 E.03278 G1 X54.443 Y.642 E.03278 G1 X54.232 Y1.497 E.03278 G1 X53.859 Y2.294 E.03278 G1 X53.337 Y3.002 E.03278 G1 X52.687 Y3.596 E.03278 G1 X51.934 Y4.051 E.03278 G1 X51.107 Y4.35 E.03278 G1 X50.237 Y4.483 E.03278 G1 X49.358 Y4.443 E.03278 G1 X48.503 Y4.232 E.03278 G1 X47.706 Y3.859 E.03278 G1 X46.998 Y3.337 E.03278 G1 X46.404 Y2.687 E.03278 G1 X45.949 Y1.934 E.03278 G1 X45.65 Y1.107 E.03278 G1 X45.517 Y.237 E.03278 G1 X45.52 Y.169 E.00252 G1 X45.968 Y.162 F30000 G1 F3000 G1 X46.014 Y-.628 E.02946 G1 X46.213 Y-1.393 E.02946 G1 X46.558 Y-2.105 E.02946 G1 X47.035 Y-2.736 E.02946 G1 X47.625 Y-3.262 E.02946 G1 X48.307 Y-3.663 E.02946 G1 X49.055 Y-3.923 E.02946 G1 X49.838 Y-4.032 E.02946 G1 X50.626 Y-3.986 E.0294 G1 X51.393 Y-3.787 E.0295 G1 X52.105 Y-3.442 E.02948 G1 X52.736 Y-2.965 E.02947 G1 X53.262 Y-2.375 E.02946 G1 X53.663 Y-1.693 E.02946 G1 X53.923 Y-.945 E.02946 G1 X54.032 Y-.162 E.02946 G1 X53.986 Y.628 E.02946 G1 X53.787 Y1.393 E.02946 G1 X53.442 Y2.105 E.02946 G1 X52.965 Y2.736 E.02946 G1 X52.375 Y3.262 E.02946 G1 X51.693 Y3.663 E.02946 G1 X50.945 Y3.923 E.02946 G1 X50.162 Y4.032 E.02946 G1 X49.372 Y3.986 E.02946 G1 X48.607 Y3.787 E.02946 G1 X47.895 Y3.442 E.02946 G1 X47.264 Y2.965 E.02946 G1 X46.738 Y2.375 E.02946 G1 X46.337 Y1.693 E.02946 G1 X46.077 Y.945 E.02946 G1 X45.974 Y.202 E.02797 G1 X46.427 Y.145 F30000 G1 F3000 G1 X46.42 Y.094 E.00192 G1 X46.471 Y-.606 E.02615 G1 X46.657 Y-1.283 E.02615 G1 X46.971 Y-1.911 E.02615 G1 X47.402 Y-2.465 E.02615 G1 X47.933 Y-2.924 E.02615 G1 X48.543 Y-3.271 E.02615 G1 X49.21 Y-3.493 E.02615 G1 X49.906 Y-3.58 E.02615 G1 X50.605 Y-3.53 E.02608 G1 X51.283 Y-3.343 E.02619 G1 X51.911 Y-3.029 E.02616 G1 X52.465 Y-2.598 E.02615 G1 X52.924 Y-2.067 E.02615 G1 X53.271 Y-1.457 E.02615 G1 X53.493 Y-.79 E.02615 G1 X53.58 Y-.094 E.02615 G1 X53.529 Y.606 E.02615 G1 X53.343 Y1.283 E.02615 G1 X53.029 Y1.911 E.02615 G1 X52.598 Y2.465 E.02615 G1 X52.067 Y2.924 E.02615 G1 X51.457 Y3.271 E.02615 G1 X50.79 Y3.493 E.02615 G1 X50.094 Y3.58 E.02615 G1 X49.394 Y3.529 E.02615 G1 X48.717 Y3.343 E.02615 G1 X48.089 Y3.029 E.02615 G1 X47.535 Y2.598 E.02615 G1 X47.076 Y2.067 E.02615 G1 X46.729 Y1.457 E.02615 G1 X46.507 Y.79 E.02615 G1 X46.432 Y.185 E.02274 G1 X46.884 Y.135 F30000 G1 F3000 G1 X46.873 Y.033 E.00383 G1 X46.927 Y-.578 E.02283 G1 X47.099 Y-1.166 E.02283 G1 X47.382 Y-1.71 E.02283 G1 X47.766 Y-2.188 E.02283 G1 X48.235 Y-2.582 E.02283 G1 X48.773 Y-2.876 E.02283 G1 X49.358 Y-3.06 E.02283 G1 X49.967 Y-3.127 E.02283 G1 X50.576 Y-3.073 E.02277 G1 X51.166 Y-2.902 E.02289 G1 X51.71 Y-2.618 E.02284 G1 X52.188 Y-2.234 E.02283 G1 X52.582 Y-1.765 E.02283 G1 X52.876 Y-1.227 E.02283 G1 X53.06 Y-.642 E.02283 G1 X53.127 Y-.033 E.02283 G1 X53.073 Y.578 E.02283 G1 X52.901 Y1.166 E.02283 G1 X52.618 Y1.71 E.02283 G1 X52.234 Y2.188 E.02283 G1 X51.765 Y2.582 E.02283 G1 X51.227 Y2.876 E.02283 G1 X50.642 Y3.06 E.02283 G1 X50.033 Y3.127 E.02283 G1 X49.422 Y3.073 E.02283 G1 X48.834 Y2.901 E.02283 G1 X48.29 Y2.618 E.02283 G1 X47.812 Y2.234 E.02283 G1 X47.418 Y1.765 E.02283 G1 X47.124 Y1.227 E.02283 G1 X46.94 Y.642 E.02283 G1 X46.889 Y.175 E.01751 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X46.873 Y.033 G1 X46.927 Y-.578 G1 X47.099 Y-1.166 G1 X47.382 Y-1.71 G1 X47.393 Y-1.724 ;WIPE_END G1 X50.479 Y-2.502 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X50.496 Y-2.5 E.00063 G1 X50.975 Y-2.355 E.01867 G1 X51.416 Y-2.119 E.01861 G1 X51.802 Y-1.802 E.01861 G1 X52.119 Y-1.416 E.01861 G1 X52.355 Y-.975 E.01861 G1 X52.5 Y-.497 E.01861 G1 X52.549 Y0 E.01861 G1 X52.5 Y.497 E.01861 G1 X52.355 Y.975 E.01861 G1 X52.119 Y1.416 E.01861 G1 X51.802 Y1.802 E.01861 G1 X51.416 Y2.119 E.01861 G1 X50.975 Y2.355 E.01861 G1 X50.497 Y2.5 E.01861 G1 X50 Y2.549 E.01861 G1 X49.503 Y2.5 E.01861 G1 X49.025 Y2.355 E.01861 G1 X48.584 Y2.119 E.01861 G1 X48.198 Y1.802 E.01861 G1 X47.881 Y1.416 E.01861 G1 X47.645 Y.975 E.01861 G1 X47.5 Y.497 E.01861 G1 X47.451 Y0 E.01861 G1 X47.5 Y-.497 E.01861 G1 X47.645 Y-.975 E.01861 G1 X47.881 Y-1.416 E.01861 G1 X48.198 Y-1.802 E.01861 G1 X48.584 Y-2.119 E.01861 G1 X49.025 Y-2.355 E.01861 G1 X49.503 Y-2.5 E.01861 G1 X50 Y-2.549 E.01861 G1 X50.248 Y-2.524 E.00927 G1 X50.439 Y-2.506 E.00716 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X50.496 Y-2.5 G1 X50.975 Y-2.355 G1 X51.416 Y-2.119 G1 X51.802 Y-1.802 G1 X52.083 Y-1.46 ;WIPE_END G1 X49.226 Y-2.099 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X49.42 Y-2.165 E.00763 G3 X49.707 Y-2.222 I.585 J2.164 E.01093 G3 X50 Y2.242 I.288 J2.223 E.27286 G3 X49.143 Y-2.07 I.005 J-2.242 E.22917 G1 X49.188 Y-2.086 E.0018 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X49.42 Y-2.165 G1 X49.707 Y-2.222 G1 X49.985 Y-2.241 G1 X50.292 Y-2.223 G1 X50.58 Y-2.165 G1 X50.858 Y-2.071 G1 X51.117 Y-1.943 ;WIPE_END G1 X43.485 Y-2.005 Z.6 F30000 G1 X33.642 Y-2.086 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Brim G1 F3000 G1 X33.642 Y60.992 E2.3494 G1 X33.594 Y61.64 E.02422 G1 X33.454 Y62.261 E.02373 G1 X33.051 Y63.189 E.03766 G1 X32.701 Y63.724 E.02381 G1 X32.274 Y64.203 E.0239 G1 X31.781 Y64.614 E.0239 G1 X31.236 Y64.947 E.02378 G1 X30.398 Y65.273 E.0335 G1 X29.771 Y65.404 E.02386 G1 X29.192 Y65.442 E.02159 G1 X-49.792 Y65.442 E2.94185 G1 X-50.44 Y65.394 E.02422 G1 X-51.061 Y65.254 E.02373 G1 X-51.989 Y64.851 E.03766 G1 X-52.524 Y64.501 E.02381 G1 X-53.003 Y64.074 E.0239 G1 X-53.414 Y63.581 E.0239 G1 X-53.747 Y63.036 E.02378 G1 X-54.073 Y62.198 E.0335 G1 X-54.204 Y61.571 E.02386 G1 X-54.242 Y60.992 E.02159 G1 X-54.242 Y-5.992 E2.4949 G1 X-54.194 Y-6.64 E.02422 G1 X-54.054 Y-7.263 E.02377 G1 X-53.697 Y-8.106 E.03411 G1 X-53.3 Y-8.724 E.02737 G1 X-52.874 Y-9.203 E.02386 G1 X-52.381 Y-9.614 E.0239 G1 X-51.836 Y-9.947 E.0238 G1 X-51.05 Y-10.258 E.03148 G1 X-50.37 Y-10.404 E.02589 G1 X-49.792 Y-10.442 E.02157 G1 X-45.471 Y-10.442 E.16097 G1 X-45.33 Y-10.491 E.00555 G1 X-45.242 Y-10.671 E.00745 G1 X-45.242 Y-15.689 E.18689 G1 X-45.291 Y-15.829 E.00555 G1 X-45.471 Y-15.917 E.00745 G1 X-50.792 Y-15.917 E.19818 G1 X-51.44 Y-15.965 E.02422 G1 X-52.063 Y-16.106 E.02377 G1 X-52.906 Y-16.463 E.03411 G1 X-53.524 Y-16.859 E.02737 G1 X-54.003 Y-17.285 E.02386 G1 X-54.414 Y-17.778 E.0239 G1 X-54.747 Y-18.323 E.02378 G1 X-55.073 Y-19.161 E.0335 G1 X-55.204 Y-19.788 E.02386 G1 X-55.242 Y-20.367 E.02159 G1 X-55.242 Y-24.411 E.15063 G1 X-55.194 Y-25.059 E.02422 G1 X-55.054 Y-25.681 E.02373 G1 X-54.651 Y-26.608 E.03766 G1 X-54.301 Y-27.143 E.02381 G1 X-53.874 Y-27.622 E.0239 G1 X-53.381 Y-28.034 E.0239 G1 X-52.836 Y-28.366 E.0238 G1 X-52.05 Y-28.677 E.03148 G1 X-51.37 Y-28.823 E.02589 G1 X-50.792 Y-28.862 E.02157 G1 X-45.471 Y-28.862 E.19821 G1 X-45.33 Y-28.91 E.00555 G1 X-45.242 Y-29.09 E.00745 G1 X-45.242 Y-46.329 E.64209 G1 X-45.291 Y-46.47 E.00555 G1 X-45.471 Y-46.558 E.00745 G1 X-52.792 Y-46.558 E.27267 G1 X-53.44 Y-46.606 E.02422 G1 X-54.061 Y-46.746 E.02373 G1 X-54.989 Y-47.149 E.03766 G1 X-55.524 Y-47.499 E.02381 G1 X-56.003 Y-47.926 E.0239 G1 X-56.414 Y-48.419 E.0239 G1 X-56.747 Y-48.964 E.0238 G1 X-57.058 Y-49.75 E.03148 G1 X-57.204 Y-50.43 E.02589 G1 X-57.242 Y-51.008 E.02157 G1 X-57.242 Y-60.992 E.37187 G1 X-57.194 Y-61.64 E.02422 G1 X-57.054 Y-62.261 E.02373 G1 X-56.651 Y-63.189 E.03766 G1 X-56.301 Y-63.724 E.02381 G1 X-55.874 Y-64.203 E.0239 G1 X-55.381 Y-64.614 E.0239 G1 X-54.836 Y-64.947 E.02378 G1 X-53.998 Y-65.273 E.0335 G1 X-53.371 Y-65.404 E.02386 G1 X-52.792 Y-65.442 E.02159 G1 X32.192 Y-65.442 E3.16533 G1 X32.84 Y-65.394 E.02422 G1 X33.463 Y-65.254 E.02377 G1 X34.306 Y-64.897 E.03411 G1 X34.924 Y-64.5 E.02737 G1 X35.403 Y-64.074 E.02386 G1 X35.814 Y-63.581 E.0239 G1 X36.147 Y-63.036 E.02378 G1 X36.473 Y-62.198 E.0335 G1 X36.604 Y-61.571 E.02386 G1 X36.642 Y-60.992 E.02159 G1 X36.642 Y-51.008 E.37187 G1 X36.594 Y-50.36 E.02422 G1 X36.454 Y-49.737 E.02377 G1 X36.097 Y-48.894 E.03411 G1 X35.7 Y-48.276 E.02737 G1 X35.274 Y-47.797 E.02386 G1 X34.781 Y-47.386 E.0239 G1 X34.236 Y-47.053 E.0238 G1 X33.45 Y-46.742 E.03148 G1 X32.77 Y-46.596 E.02589 G1 X32.192 Y-46.558 E.02157 G1 X24.871 Y-46.558 E.2727 G1 X24.73 Y-46.509 E.00555 G1 X24.642 Y-46.329 E.00745 G1 X24.642 Y-10.671 E1.32814 G1 X24.691 Y-10.53 E.00555 G1 X24.871 Y-10.442 E.00745 G1 X29.192 Y-10.442 E.16093 G1 X29.84 Y-10.394 E.02422 G1 X30.463 Y-10.254 E.02377 G1 X31.306 Y-9.897 E.03411 G1 X31.924 Y-9.5 E.02737 G1 X32.403 Y-9.074 E.02386 G1 X32.814 Y-8.581 E.0239 G1 X33.147 Y-8.036 E.0238 G1 X33.458 Y-7.25 E.03148 G1 X33.604 Y-6.57 E.02589 G1 X33.642 Y-5.992 E.02157 G1 X33.642 Y-2.126 E.14401 G1 X33.185 Y-2.126 F30000 G1 F3000 G1 X33.185 Y60.97 E2.35007 G1 X33.142 Y61.562 E.02214 G1 X33.02 Y62.106 E.02075 G1 X32.641 Y62.981 E.03551 G1 X32.33 Y63.453 E.02105 G1 X31.962 Y63.866 E.02062 G1 X31.522 Y64.235 E.02138 G1 X31.043 Y64.529 E.02093 G1 X30.256 Y64.836 E.03145 G1 X29.718 Y64.948 E.02048 G1 X29.173 Y64.985 E.02036 G1 X-49.77 Y64.985 E2.9403 G1 X-50.362 Y64.942 E.02214 G1 X-50.906 Y64.82 E.02075 G1 X-51.781 Y64.441 E.03551 G1 X-52.253 Y64.13 E.02105 G1 X-52.666 Y63.762 E.02062 G1 X-53.035 Y63.322 E.02138 G1 X-53.329 Y62.843 E.02093 G1 X-53.636 Y62.056 E.03145 G1 X-53.748 Y61.518 E.02048 G1 X-53.785 Y60.973 E.02036 G1 X-53.785 Y-5.97 E2.49335 G1 X-53.742 Y-6.562 E.02214 G1 X-53.612 Y-7.133 E.02181 G1 X-53.295 Y-7.881 E.03025 G1 X-52.94 Y-8.438 E.02461 G1 X-52.547 Y-8.88 E.02203 G1 X-52.106 Y-9.247 E.02138 G1 X-51.62 Y-9.541 E.02114 G1 X-50.927 Y-9.815 E.02775 G1 X-50.297 Y-9.951 E.02403 G1 X-49.773 Y-9.985 E.01956 G1 X-45.482 Y-9.985 E.15981 G1 X-45.194 Y-10.054 E.01103 G1 X-45.021 Y-10.157 E.00749 G1 X-44.913 Y-10.302 E.00674 G1 X-44.838 Y-10.457 E.00639 G1 X-44.785 Y-10.686 E.00878 G1 X-44.785 Y-15.677 E.18589 G1 X-44.854 Y-15.965 E.01103 G1 X-44.957 Y-16.138 E.00749 G1 X-45.102 Y-16.246 E.00674 G1 X-45.257 Y-16.321 E.00639 G1 X-45.486 Y-16.374 E.00878 G1 X-50.77 Y-16.374 E.19678 G1 X-51.362 Y-16.418 E.02214 G1 X-51.933 Y-16.547 E.02181 G1 X-52.681 Y-16.864 E.03025 G1 X-53.255 Y-17.232 E.02541 G1 X-53.68 Y-17.612 E.02123 G1 X-54.047 Y-18.053 E.02138 G1 X-54.34 Y-18.538 E.02108 G1 X-54.636 Y-19.303 E.03055 G1 X-54.748 Y-19.841 E.02048 G1 X-54.785 Y-20.386 E.02036 G1 X-54.785 Y-24.399 E.14945 G1 X-54.742 Y-24.982 E.02176 G1 X-54.62 Y-25.525 E.02075 G1 X-54.241 Y-26.4 E.03551 G1 X-53.93 Y-26.872 E.02105 G1 X-53.547 Y-27.3 E.02137 G1 X-53.106 Y-27.666 E.02138 G1 X-52.62 Y-27.96 E.02114 G1 X-51.906 Y-28.241 E.02859 G1 X-51.317 Y-28.367 E.02245 G1 X-50.782 Y-28.404 E.01996 G1 X-45.482 Y-28.405 E.19739 G1 X-45.194 Y-28.474 E.01103 G1 X-45.021 Y-28.577 E.00749 G1 X-44.913 Y-28.722 E.00674 G1 X-44.838 Y-28.876 E.00639 G1 X-44.785 Y-29.106 E.00878 G1 X-44.785 Y-46.318 E.64108 G1 X-44.854 Y-46.606 E.01103 G1 X-44.957 Y-46.779 E.00749 G1 X-45.102 Y-46.887 E.00674 G1 X-45.257 Y-46.962 E.00639 G1 X-45.486 Y-47.015 E.00878 G1 X-52.77 Y-47.015 E.27127 G1 X-53.382 Y-47.061 E.02289 G1 X-53.931 Y-47.188 E.02096 G1 X-54.781 Y-47.559 E.03455 G1 X-55.253 Y-47.87 E.02105 G1 X-55.666 Y-48.238 E.02062 G1 X-56.047 Y-48.694 E.02213 G1 X-56.341 Y-49.18 E.02114 G1 X-56.615 Y-49.873 E.02775 G1 X-56.748 Y-50.483 E.02329 G1 X-56.785 Y-51.027 E.0203 G1 X-56.785 Y-60.98 E.37069 G1 X-56.742 Y-61.562 E.02176 G1 X-56.62 Y-62.106 E.02075 G1 X-56.241 Y-62.981 E.03551 G1 X-55.93 Y-63.453 E.02105 G1 X-55.562 Y-63.866 E.02062 G1 X-55.122 Y-64.235 E.02138 G1 X-54.643 Y-64.529 E.02093 G1 X-53.856 Y-64.836 E.03145 G1 X-53.318 Y-64.948 E.02048 G1 X-52.773 Y-64.985 E.02036 G1 X32.18 Y-64.985 E3.16416 G1 X32.782 Y-64.939 E.02251 G1 X33.333 Y-64.812 E.02106 G1 X34.081 Y-64.495 E.03025 G1 X34.655 Y-64.127 E.02541 G1 X35.08 Y-63.747 E.02123 G1 X35.447 Y-63.306 E.02138 G1 X35.74 Y-62.822 E.02108 G1 X36.036 Y-62.056 E.03055 G1 X36.148 Y-61.518 E.02048 G1 X36.185 Y-60.973 E.02036 G1 X36.185 Y-51.03 E.37032 G1 X36.142 Y-50.438 E.02214 G1 X36.012 Y-49.867 E.02181 G1 X35.695 Y-49.119 E.03025 G1 X35.327 Y-48.545 E.02541 G1 X34.947 Y-48.12 E.02123 G1 X34.506 Y-47.753 E.02138 G1 X34.02 Y-47.459 E.02114 G1 X33.327 Y-47.185 E.02775 G1 X32.717 Y-47.052 E.02329 G1 X32.173 Y-47.015 E.0203 G1 X24.882 Y-47.015 E.27155 G1 X24.594 Y-46.946 E.01103 G1 X24.421 Y-46.843 E.00749 G1 X24.313 Y-46.698 E.00674 G1 X24.238 Y-46.543 E.00639 G1 X24.185 Y-46.314 E.00878 G1 X24.185 Y-10.682 E1.32713 G1 X24.254 Y-10.394 E.01103 G1 X24.357 Y-10.221 E.00749 G1 X24.502 Y-10.113 E.00674 G1 X24.657 Y-10.038 E.00639 G1 X24.886 Y-9.985 E.00878 G1 X29.17 Y-9.985 E.15953 G1 X29.762 Y-9.942 E.02214 G1 X30.333 Y-9.812 E.02181 G1 X31.081 Y-9.495 E.03025 G1 X31.655 Y-9.127 E.02541 G1 X32.08 Y-8.747 E.02123 G1 X32.447 Y-8.306 E.02138 G1 X32.741 Y-7.82 E.02114 G1 X33.015 Y-7.127 E.02775 G1 X33.151 Y-6.497 E.02403 G1 X33.185 Y-5.973 E.01956 G1 X33.185 Y-2.166 E.14179 G1 X32.728 Y-2.166 F30000 G1 F3000 G1 X32.728 Y60.948 E2.35075 G1 X32.689 Y61.485 E.02008 G1 X32.587 Y61.951 E.01776 G1 X32.231 Y62.772 E.03333 G1 X31.96 Y63.181 E.01827 G1 X31.635 Y63.544 E.01814 G1 X31.262 Y63.857 E.01812 G1 X30.85 Y64.112 E.01806 G1 X30.115 Y64.398 E.02938 G1 X29.646 Y64.495 E.01782 G1 X29.153 Y64.528 E.01842 G1 X-49.748 Y64.528 E2.93874 G1 X-50.285 Y64.489 E.02008 M73 P1 R80 G1 X-50.751 Y64.387 E.01776 G1 X-51.572 Y64.031 E.03333 G1 X-51.981 Y63.76 E.01827 G1 X-52.344 Y63.435 E.01814 G1 X-52.657 Y63.062 E.01812 G1 X-52.912 Y62.65 E.01806 G1 X-53.198 Y61.915 E.02938 G1 X-53.295 Y61.446 E.01782 G1 X-53.328 Y60.953 E.01842 G1 X-53.328 Y-5.948 E2.49179 G1 X-53.289 Y-6.484 E.02004 G1 X-53.171 Y-7.004 E.01984 G1 X-52.894 Y-7.657 E.02643 G1 X-52.567 Y-8.17 E.02265 G1 X-52.221 Y-8.557 E.01935 G1 X-51.831 Y-8.879 E.01881 G1 X-51.406 Y-9.134 E.01848 G1 X-50.805 Y-9.372 E.02407 G1 X-50.243 Y-9.495 E.02141 G1 X-49.753 Y-9.528 E.01829 G1 X-45.496 Y-9.528 E.15858 G1 X-45.095 Y-9.608 E.01521 G1 X-44.951 Y-9.667 E.0058 G1 X-44.799 Y-9.758 E.0066 G1 X-44.647 Y-9.895 E.00763 G1 X-44.553 Y-10.021 E.00586 G1 X-44.432 Y-10.248 E.00956 G1 X-44.341 Y-10.579 E.0128 G1 X-44.328 Y-10.694 E.00432 G1 X-44.328 Y-15.664 E.18509 G1 X-44.408 Y-16.064 E.01521 G1 X-44.467 Y-16.208 E.0058 G1 X-44.558 Y-16.36 E.0066 G1 X-44.695 Y-16.512 E.00763 G1 X-44.821 Y-16.606 E.00586 G1 X-45.159 Y-16.767 E.01394 G1 X-45.499 Y-16.831 E.01289 G1 X-50.748 Y-16.831 E.19549 G1 X-51.284 Y-16.87 E.02004 G1 X-51.804 Y-16.989 E.01984 G1 X-52.456 Y-17.265 E.0264 G1 X-52.986 Y-17.604 E.02343 G1 X-53.357 Y-17.938 E.01857 G1 X-53.667 Y-18.311 E.01808 G1 X-53.922 Y-18.73 E.01824 G1 X-54.192 Y-19.423 E.0277 G1 X-54.292 Y-19.894 E.01797 G1 X-54.328 Y-20.407 E.01912 G1 X-54.327 Y-24.387 E.14826 G1 X-54.289 Y-24.905 E.01933 G1 X-54.187 Y-25.371 E.01777 G1 X-53.831 Y-26.191 E.03333 G1 X-53.56 Y-26.6 E.01825 G1 X-53.221 Y-26.976 E.01885 G1 X-52.831 Y-27.298 E.01884 G1 X-52.406 Y-27.553 E.01847 G1 X-51.762 Y-27.804 E.02573 G1 X-51.262 Y-27.912 E.01906 G1 X-50.771 Y-27.947 E.01835 G1 X-45.49 Y-27.947 E.19668 G1 X-45.368 Y-27.962 E.00459 G1 X-45.098 Y-28.027 E.01035 G1 X-44.951 Y-28.086 E.0059 G1 X-44.799 Y-28.177 E.0066 G1 X-44.647 Y-28.314 E.00763 G1 X-44.553 Y-28.44 E.00586 G1 X-44.432 Y-28.667 E.00956 G1 X-44.341 Y-28.998 E.0128 G1 X-44.328 Y-29.114 E.00432 G1 X-44.328 Y-46.304 E.64029 G1 X-44.408 Y-46.705 E.01521 G1 X-44.467 Y-46.849 E.0058 G1 X-44.558 Y-47.001 E.0066 G1 X-44.695 Y-47.153 E.00763 G1 X-44.821 Y-47.247 E.00586 G1 X-45.159 Y-47.408 E.01394 G1 X-45.499 Y-47.472 E.01289 G1 X-52.747 Y-47.472 E.26996 G1 X-53.303 Y-47.514 E.02077 G1 X-53.798 Y-47.629 E.01893 G1 X-54.571 Y-47.969 E.03147 G1 X-54.965 Y-48.228 E.01756 G1 X-55.329 Y-48.55 E.01811 G1 X-55.679 Y-48.969 E.02033 G1 X-55.934 Y-49.394 E.01845 G1 X-56.172 Y-49.996 E.0241 G1 X-56.292 Y-50.538 E.02069 G1 X-56.328 Y-51.047 E.01901 G1 X-56.327 Y-60.968 E.3695 G1 X-56.289 Y-61.485 E.01933 G1 X-56.187 Y-61.951 E.01777 G1 X-55.831 Y-62.772 E.03333 G1 X-55.56 Y-63.181 E.01827 G1 X-55.235 Y-63.544 E.01814 G1 X-54.862 Y-63.857 E.01812 G1 X-54.45 Y-64.112 E.01806 G1 X-53.715 Y-64.398 E.02938 G1 X-53.246 Y-64.495 E.01782 G1 X-52.753 Y-64.528 E.01842 G1 X32.157 Y-64.528 E3.16256 G1 X32.703 Y-64.486 E.0204 G1 X33.203 Y-64.371 E.01911 G1 X33.856 Y-64.094 E.02643 G1 X34.369 Y-63.768 E.02261 G1 X34.757 Y-63.421 E.01938 G1 X35.079 Y-63.031 E.01884 G1 X35.332 Y-62.608 E.01837 G1 X35.598 Y-61.915 E.02764 G1 X35.695 Y-61.446 E.01785 G1 X35.728 Y-60.953 E.01842 G1 X35.728 Y-51.052 E.36875 G1 X35.686 Y-50.495 E.0208 G1 X35.571 Y-49.996 E.01908 G1 X35.294 Y-49.344 E.0264 G1 X34.955 Y-48.814 E.02343 G1 X34.621 Y-48.443 E.01857 G1 X34.231 Y-48.121 E.01884 G1 X33.806 Y-47.866 E.01848 G1 X33.204 Y-47.628 E.0241 G1 X32.662 Y-47.508 E.02069 G1 X32.153 Y-47.472 E.01902 G1 X24.89 Y-47.472 E.27049 G1 X24.498 Y-47.393 E.01492 G1 X24.351 Y-47.333 E.0059 G1 X24.199 Y-47.242 E.0066 G1 X24.047 Y-47.105 E.00763 G1 X23.953 Y-46.979 E.00586 G1 X23.832 Y-46.752 E.00956 G1 X23.741 Y-46.421 E.0128 G1 X23.728 Y-46.306 E.00432 G1 X23.728 Y-10.69 E1.32654 G1 X23.807 Y-10.298 E.01492 G1 X23.867 Y-10.151 E.0059 G1 X23.958 Y-9.999 E.0066 G1 X24.095 Y-9.847 E.00763 G1 X24.221 Y-9.753 E.00586 G1 X24.448 Y-9.632 E.00956 G1 X24.779 Y-9.541 E.0128 G1 X24.894 Y-9.528 E.00432 G1 X29.148 Y-9.528 E.15843 G1 X29.684 Y-9.489 E.02004 G1 X30.204 Y-9.371 E.01984 G1 X30.856 Y-9.094 E.0264 G1 X31.386 Y-8.755 E.02343 G1 X31.757 Y-8.421 E.01857 G1 X32.079 Y-8.031 E.01884 G1 X32.334 Y-7.606 E.01848 G1 X32.572 Y-7.005 E.02407 G1 X32.698 Y-6.423 E.02216 G1 X32.728 Y-5.953 E.01754 G1 X32.728 Y-2.206 E.13958 G1 X32.271 Y-2.206 F30000 G1 F3000 G1 X32.271 Y60.926 E2.35143 G1 X32.236 Y61.41 E.01806 G1 X32.153 Y61.797 E.01476 G1 X31.821 Y62.563 E.03111 G1 X31.59 Y62.908 E.01545 G1 X31.323 Y63.207 E.01495 G1 X31.001 Y63.479 E.01567 G1 X30.655 Y63.694 E.01518 G1 X29.973 Y63.961 E.02728 G1 X29.575 Y64.042 E.01513 G1 X29.133 Y64.071 E.01651 G1 X-49.726 Y64.071 E2.93719 G1 X-50.21 Y64.036 E.01806 G1 X-50.597 Y63.953 E.01476 G1 X-51.363 Y63.621 E.03111 G1 X-51.708 Y63.39 E.01545 G1 X-52.007 Y63.123 E.01495 G1 X-52.279 Y62.801 E.01567 G1 X-52.494 Y62.455 E.01518 G1 X-52.761 Y61.773 E.02728 G1 X-52.842 Y61.375 E.01513 G1 X-52.871 Y60.933 E.01651 G1 X-52.871 Y-5.926 E2.49024 G1 X-52.836 Y-6.406 E.01792 G1 X-52.729 Y-6.874 E.01787 G1 X-52.492 Y-7.433 E.02263 G1 X-52.194 Y-7.902 E.02067 G1 X-51.895 Y-8.233 E.01664 G1 X-51.558 Y-8.51 E.01624 G1 X-51.192 Y-8.727 E.01584 G1 X-50.681 Y-8.929 E.02047 G1 X-50.188 Y-9.039 E.01881 G1 X-49.734 Y-9.071 E.01698 G1 X-45.393 Y-9.083 E.16167 G1 X-45.016 Y-9.158 E.01433 G1 X-44.784 Y-9.242 E.00916 G1 X-44.573 Y-9.361 E.00904 G1 X-44.347 Y-9.55 E.01099 G1 X-44.19 Y-9.743 E.00925 G1 X-44.035 Y-10.022 E.0119 G1 X-43.902 Y-10.452 E.01676 G1 X-43.875 Y-10.637 E.00697 G1 X-43.871 Y-15.65 E.18671 G1 X-43.989 Y-16.247 E.02265 G1 X-44.078 Y-16.447 E.00816 G1 X-44.226 Y-16.675 E.01011 G1 X-44.348 Y-16.811 E.00683 G1 X-44.541 Y-16.967 E.00924 G1 X-44.956 Y-17.177 E.01731 G1 X-45.082 Y-17.218 E.00494 G1 X-45.51 Y-17.288 E.01617 G1 X-50.726 Y-17.288 E.19427 G1 X-51.206 Y-17.323 E.01792 G1 X-51.674 Y-17.43 E.01787 G1 X-52.232 Y-17.666 E.02257 G1 X-52.717 Y-17.977 E.02143 G1 X-53.033 Y-18.263 E.01588 G1 X-53.288 Y-18.57 E.01486 G1 X-53.504 Y-18.923 E.01542 G1 X-53.748 Y-19.544 E.02485 G1 X-53.837 Y-19.949 E.01545 G1 X-53.871 Y-20.427 E.01787 G1 X-53.87 Y-24.375 E.14704 G1 X-53.836 Y-24.829 E.01694 G1 X-53.753 Y-25.216 E.01477 G1 X-53.421 Y-25.983 E.03111 G1 X-53.191 Y-26.327 E.01541 G1 X-52.897 Y-26.652 E.01632 G1 X-52.558 Y-26.929 E.0163 G1 X-52.193 Y-27.146 E.0158 G1 X-51.62 Y-27.367 E.0229 G1 X-51.188 Y-27.459 E.01644 G1 X-50.759 Y-27.489 E.016 G1 X-45.497 Y-27.49 E.19601 G1 X-45.321 Y-27.507 E.00657 G1 X-44.918 Y-27.607 E.01547 G1 X-44.576 Y-27.778 E.01423 G1 X-44.274 Y-28.051 E.01519 G1 X-44.146 Y-28.233 E.00829 G1 X-44.035 Y-28.44 E.00876 G1 X-43.903 Y-28.87 E.01675 G1 X-43.871 Y-29.122 E.00946 M73 P1 R79 G1 X-43.871 Y-46.291 E.63947 G1 X-43.989 Y-46.887 E.02265 G1 X-44.078 Y-47.088 E.00816 G1 X-44.226 Y-47.315 E.01011 G1 X-44.348 Y-47.451 E.00683 G1 X-44.541 Y-47.608 E.00924 G1 X-44.956 Y-47.817 E.01731 G1 X-45.082 Y-47.858 E.00494 G1 X-45.51 Y-47.929 E.01617 G1 X-52.725 Y-47.929 E.26871 G1 X-53.223 Y-47.966 E.01863 G1 X-53.665 Y-48.069 E.01689 G1 X-54.362 Y-48.378 E.02839 G1 X-54.694 Y-48.598 E.01485 G1 X-54.993 Y-48.863 E.01486 G1 X-55.311 Y-49.244 E.01849 G1 X-55.527 Y-49.608 E.01575 G1 X-55.73 Y-50.12 E.02052 G1 X-55.836 Y-50.594 E.0181 G1 X-55.871 Y-51.068 E.01771 G1 X-55.87 Y-60.956 E.36828 G1 X-55.836 Y-61.409 E.01694 G1 X-55.753 Y-61.797 E.01477 G1 X-55.421 Y-62.563 E.03111 G1 X-55.19 Y-62.908 E.01545 G1 X-54.923 Y-63.207 E.01495 G1 X-54.601 Y-63.479 E.01567 G1 X-54.255 Y-63.694 E.01518 G1 X-53.573 Y-63.961 E.02728 G1 X-53.175 Y-64.042 E.01513 G1 X-52.733 Y-64.071 E.01651 G1 X32.134 Y-64.071 E3.16098 G1 X32.624 Y-64.034 E.01827 G1 X33.072 Y-63.93 E.01716 G1 X33.633 Y-63.692 E.02267 G1 X34.1 Y-63.395 E.02064 G1 X34.433 Y-63.096 E.01667 G1 X34.698 Y-62.775 E.0155 G1 X34.914 Y-62.418 E.01555 G1 X35.154 Y-61.797 E.02479 G1 X35.239 Y-61.393 E.01536 G1 X35.271 Y-60.933 E.0172 G1 X35.271 Y-51.075 E.36717 G1 X35.234 Y-50.575 E.01867 G1 X35.137 Y-50.15 E.01625 G1 X34.893 Y-49.568 E.02349 G1 X34.583 Y-49.083 E.02143 G1 X34.297 Y-48.768 E.01587 G1 X33.958 Y-48.49 E.01631 G1 X33.592 Y-48.273 E.01584 G1 X33.08 Y-48.07 E.02052 G1 X32.606 Y-47.964 E.0181 G1 X32.132 Y-47.929 E.01771 G1 X24.902 Y-47.929 E.26926 G1 X24.416 Y-47.842 E.01841 G1 X24.184 Y-47.758 E.00917 G1 X23.975 Y-47.641 E.00895 G1 X23.674 Y-47.369 E.01512 G1 X23.547 Y-47.189 E.00819 G1 X23.388 Y-46.861 E.01357 G1 X23.303 Y-46.551 E.01196 G1 X23.271 Y-46.297 E.00954 G1 X23.271 Y-10.702 E1.32577 G1 X23.358 Y-10.216 E.01841 G1 X23.442 Y-9.984 E.00917 G1 X23.559 Y-9.775 E.00895 G1 X23.831 Y-9.474 E.01512 G1 X24.013 Y-9.346 E.00829 G1 X24.221 Y-9.235 E.00876 G1 X24.651 Y-9.103 E.01675 G1 X24.903 Y-9.071 E.00946 G1 X29.136 Y-9.071 E.15768 G1 X29.606 Y-9.036 E.01755 G1 X30.051 Y-8.937 E.01698 G1 X30.632 Y-8.693 E.02347 G1 X31.117 Y-8.383 E.02143 G1 X31.432 Y-8.097 E.01587 G1 X31.71 Y-7.758 E.01631 G1 X31.927 Y-7.392 E.01584 G1 X32.129 Y-6.882 E.02044 G1 X32.244 Y-6.35 E.02029 G1 X32.271 Y-5.934 E.01551 G1 X32.271 Y-2.246 E.13737 G1 X31.814 Y-2.246 F30000 G1 F3000 G1 X31.814 Y60.905 E2.35213 G1 X31.783 Y61.335 E.01607 G1 X31.718 Y61.643 E.01174 G1 X31.411 Y62.354 E.02884 G1 X31.222 Y62.635 E.0126 G1 X30.996 Y62.885 E.01255 G1 X30.739 Y63.102 E.01252 G1 X30.46 Y63.277 E.01227 G1 X29.832 Y63.523 E.02513 G1 X29.505 Y63.588 E.01243 G1 X29.113 Y63.614 E.01463 G1 X-49.705 Y63.614 E2.93566 G1 X-50.135 Y63.583 E.01607 G1 X-50.443 Y63.518 E.01174 G1 X-51.154 Y63.211 E.02884 G1 X-51.435 Y63.022 E.0126 G1 X-51.685 Y62.796 E.01255 G1 X-51.902 Y62.539 E.01252 G1 X-52.077 Y62.26 E.01227 G1 X-52.323 Y61.632 E.02513 G1 X-52.388 Y61.305 E.01243 G1 X-52.414 Y60.913 E.01463 G1 X-52.414 Y-5.905 E2.4887 G1 X-52.384 Y-6.328 E.01579 G1 X-52.288 Y-6.744 E.0159 G1 X-52.091 Y-7.21 E.01884 G1 X-51.822 Y-7.632 E.01867 G1 X-51.571 Y-7.908 E.01389 G1 X-51.286 Y-8.14 E.01366 G1 X-50.98 Y-8.319 E.01322 G1 X-50.557 Y-8.487 E.01696 G1 X-50.132 Y-8.583 E.01621 G1 X-49.713 Y-8.614 E.01567 G1 X-45.291 Y-8.637 E.16468 G1 X-44.853 Y-8.731 E.01669 G1 X-44.554 Y-8.847 E.01196 G1 X-44.272 Y-9.017 E.01223 G1 X-43.986 Y-9.27 E.01422 G1 X-43.786 Y-9.529 E.0122 G1 X-43.642 Y-9.788 E.01104 G1 X-43.468 Y-10.311 E.02053 G1 X-43.424 Y-10.562 E.00948 G1 X-43.414 Y-15.637 E.18904 G1 X-43.573 Y-16.436 E.03032 G1 X-43.7 Y-16.704 E.01106 G1 X-43.838 Y-16.916 E.00942 G1 X-44.004 Y-17.111 E.00956 G1 X-44.244 Y-17.314 E.01169 G1 X-44.744 Y-17.581 E.02111 G1 X-44.932 Y-17.649 E.00747 G1 X-45.521 Y-17.745 E.02223 G1 X-50.705 Y-17.745 E.19306 G1 X-51.128 Y-17.776 E.01579 G1 X-51.544 Y-17.871 E.0159 G1 X-52.007 Y-18.068 E.01876 G1 X-52.447 Y-18.349 E.01942 G1 X-52.708 Y-18.587 E.01318 G1 X-52.92 Y-18.845 E.01243 G1 X-53.087 Y-19.117 E.0119 G1 X-53.306 Y-19.666 E.02201 G1 X-53.381 Y-20.005 E.01291 G1 X-53.414 Y-20.449 E.01658 G1 X-53.412 Y-24.363 E.1458 G1 X-53.384 Y-24.754 E.01458 G1 X-53.318 Y-25.063 E.01176 G1 X-53.011 Y-25.774 E.02884 G1 X-52.823 Y-26.053 E.01253 G1 X-52.573 Y-26.326 E.0138 G1 X-52.286 Y-26.559 E.01376 G1 X-51.982 Y-26.737 E.01312 G1 X-51.478 Y-26.93 E.02009 G1 X-51.115 Y-27.006 E.01384 G1 X-50.748 Y-27.032 E.01369 G1 X-45.504 Y-27.033 E.19531 G1 X-45.205 Y-27.066 E.01121 G1 X-44.701 Y-27.204 E.01945 G1 X-44.38 Y-27.365 E.01338 G1 X-44.265 Y-27.443 E.0052 G1 X-43.893 Y-27.798 E.01915 G1 X-43.739 Y-28.024 E.01019 G1 X-43.637 Y-28.215 E.00804 G1 X-43.469 Y-28.726 E.02006 G1 X-43.414 Y-29.131 E.01523 G1 X-43.414 Y-46.278 E.63866 G1 X-43.573 Y-47.076 E.03031 G1 X-43.7 Y-47.345 E.01106 G1 X-43.838 Y-47.557 E.00942 G1 X-44.004 Y-47.752 E.00956 G1 X-44.244 Y-47.955 E.01169 G1 X-44.744 Y-48.222 E.02111 G1 X-44.932 Y-48.29 E.00747 G1 X-45.521 Y-48.386 E.02223 G1 X-52.703 Y-48.386 E.26747 G1 X-53.143 Y-48.419 E.01646 G1 X-53.531 Y-48.51 E.01483 G1 X-54.151 Y-48.787 E.0253 G1 X-54.422 Y-48.968 E.01215 G1 X-54.656 Y-49.175 E.01164 G1 X-54.93 Y-49.5 E.01582 G1 X-55.119 Y-49.82 E.01384 G1 X-55.294 Y-50.266 E.01783 G1 X-55.384 Y-50.671 E.01549 G1 X-55.414 Y-51.09 E.01563 G1 X-55.413 Y-60.934 E.36665 G1 X-55.384 Y-61.334 E.01496 G1 X-55.318 Y-61.643 E.01176 G1 X-55.011 Y-62.354 E.02884 G1 X-54.822 Y-62.635 E.0126 G1 X-54.596 Y-62.885 E.01255 G1 X-54.339 Y-63.102 E.01252 G1 X-54.06 Y-63.277 E.01227 G1 X-53.432 Y-63.523 E.02513 G1 X-53.105 Y-63.588 E.01243 G1 X-52.713 Y-63.614 E.01463 G1 X32.112 Y-63.614 E3.15941 G1 X32.544 Y-63.582 E.01613 G1 X32.941 Y-63.489 E.0152 G1 X33.409 Y-63.291 E.01891 G1 X33.831 Y-63.022 E.01864 G1 X34.108 Y-62.771 E.01393 G1 X34.317 Y-62.518 E.01223 G1 X34.496 Y-62.226 E.01274 G1 X34.71 Y-61.677 E.02195 G1 X34.783 Y-61.339 E.01286 G1 X34.814 Y-60.912 E.01596 G1 X34.814 Y-51.097 E.36558 G1 X34.781 Y-50.653 E.01657 G1 X34.703 Y-50.301 E.01343 G1 X34.48 Y-49.771 E.02141 G1 X34.211 Y-49.353 E.01852 G1 X33.973 Y-49.093 E.01312 G1 X33.686 Y-48.86 E.01376 G1 X33.38 Y-48.681 E.01322 G1 X32.955 Y-48.512 E.01703 G1 X32.529 Y-48.416 E.01628 G1 X32.11 Y-48.386 E.01563 G1 X24.914 Y-48.386 E.26801 G1 X24.249 Y-48.268 E.02517 G1 X24.038 Y-48.191 E.00837 G1 X23.761 Y-48.045 E.01166 G1 X23.372 Y-47.712 E.01908 G1 X23.297 Y-47.627 E.00423 G1 X23.133 Y-47.381 E.01099 G1 X22.945 Y-46.972 E.01677 G1 X22.849 Y-46.601 E.01429 G1 X22.814 Y-46.29 E.01166 G1 X22.814 Y-10.713 E1.32508 G1 X22.906 Y-10.145 E.02147 G1 X23.009 Y-9.836 E.01211 G1 X23.155 Y-9.561 E.01159 G1 X23.485 Y-9.176 E.0189 G1 X23.747 Y-8.975 E.01229 G1 X23.996 Y-8.837 E.01062 G1 X24.507 Y-8.669 E.02002 G1 X24.912 Y-8.614 E.01523 G1 X29.124 Y-8.613 E.1569 G1 X29.529 Y-8.584 E.01511 G1 X29.899 Y-8.502 E.01413 G1 X30.408 Y-8.291 E.0205 G1 X30.847 Y-8.011 E.01939 G1 X31.107 Y-7.773 E.01312 G1 X31.34 Y-7.486 E.01376 G1 X31.519 Y-7.18 E.01322 G1 X31.686 Y-6.759 E.01687 G1 X31.791 Y-6.276 E.01841 G1 X31.814 Y-5.915 E.01347 G1 X31.814 Y-2.286 E.13517 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X31.814 Y-.286 ;WIPE_END G1 X30.418 Y-7.79 Z.6 F30000 G1 X22.94 Y-47.993 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X22.84 Y-48.049 E.00426 G1 X22.814 Y-48.129 E.00315 G1 X22.814 Y-48.249 E.00447 G1 X22.862 Y-48.353 E.00426 G1 X22.951 Y-48.386 E.00355 G1 X23.086 Y-48.386 E.00504 G1 X23.19 Y-48.339 E.00426 G1 X23.222 Y-48.229 E.00426 G1 X23.175 Y-48.145 E.00357 G1 X23.047 Y-48.031 E.00638 G1 X22.977 Y-48.006 E.00277 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X22.84 Y-48.049 G1 X22.814 Y-48.129 G1 X22.814 Y-48.249 G1 X22.862 Y-48.353 G1 X22.951 Y-48.386 G1 X23.086 Y-48.386 G1 X23.19 Y-48.339 G1 X23.222 Y-48.229 G1 X23.175 Y-48.145 G1 X23.047 Y-48.031 G1 X22.977 Y-48.006 ;WIPE_END G1 X22.976 Y-40.374 Z.6 F30000 G1 X22.972 Y-9.022 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X23.055 Y-8.975 E.00357 G1 X23.17 Y-8.849 E.00637 G1 X23.213 Y-8.742 E.00426 G1 X23.16 Y-8.641 E.00426 G1 X23.076 Y-8.612 E.00332 G1 X22.951 Y-8.612 E.00465 G1 X22.847 Y-8.66 E.00426 G1 X22.814 Y-8.749 E.00355 G1 X22.814 Y-8.886 E.00509 G1 X22.862 Y-8.99 E.00426 G1 X22.933 Y-9.01 E.00277 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X23.055 Y-8.975 G1 X23.17 Y-8.849 G1 X23.213 Y-8.742 G1 X23.16 Y-8.641 G1 X23.076 Y-8.612 G1 X22.951 Y-8.612 G1 X22.847 Y-8.66 G1 X22.814 Y-8.749 G1 X22.814 Y-8.886 G1 X22.862 Y-8.99 G1 X22.933 Y-9.01 ;WIPE_END G1 X15.301 Y-8.994 Z.6 F30000 G1 X-43.414 Y-8.869 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-43.414 Y-8.748 E.0045 G1 X-43.462 Y-8.644 E.00426 G1 X-43.551 Y-8.611 E.00354 G1 X-43.679 Y-8.611 E.00478 G1 X-43.783 Y-8.658 E.00426 G1 X-43.815 Y-8.768 E.00426 G1 X-43.774 Y-8.848 E.00334 G1 X-43.645 Y-8.969 E.00657 G1 X-43.537 Y-9.006 E.00426 G1 X-43.438 Y-8.947 E.00426 G1 X-43.426 Y-8.907 E.00156 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-43.414 Y-8.748 G1 X-43.462 Y-8.644 G1 X-43.551 Y-8.611 G1 X-43.679 Y-8.611 G1 X-43.783 Y-8.658 G1 X-43.815 Y-8.768 G1 X-43.774 Y-8.848 G1 X-43.645 Y-8.969 G1 X-43.537 Y-9.006 G1 X-43.438 Y-8.947 G1 X-43.426 Y-8.907 ;WIPE_END G1 X-43.557 Y-16.539 Z.6 F30000 G1 X-43.572 Y-17.36 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-43.645 Y-17.395 E.00303 G1 X-43.765 Y-17.508 E.00615 G1 X-43.809 Y-17.614 E.00426 G1 X-43.757 Y-17.716 E.00426 G1 X-43.672 Y-17.745 E.00335 G1 X-43.551 Y-17.745 E.00449 G1 X-43.447 Y-17.698 E.00426 G1 X-43.414 Y-17.608 E.00355 G1 X-43.414 Y-17.496 E.0042 G1 X-43.462 Y-17.392 E.00426 G1 X-43.533 Y-17.371 E.00277 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-43.645 Y-17.395 G1 X-43.765 Y-17.508 G1 X-43.809 Y-17.614 G1 X-43.757 Y-17.716 G1 X-43.672 Y-17.745 G1 X-43.551 Y-17.745 G1 X-43.447 Y-17.698 G1 X-43.414 Y-17.608 G1 X-43.414 Y-17.496 G1 X-43.462 Y-17.392 G1 X-43.533 Y-17.371 ;WIPE_END G1 X-43.562 Y-25.003 Z.6 F30000 G1 X-43.569 Y-27.03 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-43.693 Y-27.03 E.00462 G1 X-43.797 Y-27.077 E.00426 G1 X-43.829 Y-27.187 E.00426 G1 X-43.788 Y-27.266 E.00332 G1 X-43.646 Y-27.402 E.00735 G1 X-43.537 Y-27.439 E.00426 G1 X-43.439 Y-27.382 E.00426 G1 X-43.414 Y-27.303 E.00307 G1 X-43.414 Y-27.167 E.00505 G1 X-43.462 Y-27.063 E.00426 G1 X-43.531 Y-27.038 E.00274 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-43.693 Y-27.03 G1 X-43.797 Y-27.077 G1 X-43.829 Y-27.187 G1 X-43.788 Y-27.266 G1 X-43.646 Y-27.402 G1 X-43.537 Y-27.439 G1 X-43.439 Y-27.382 G1 X-43.414 Y-27.303 G1 X-43.414 Y-27.167 G1 X-43.462 Y-27.063 G1 X-43.531 Y-27.038 ;WIPE_END G1 X-43.546 Y-34.67 Z.6 F30000 G1 X-43.572 Y-48.001 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-43.645 Y-48.036 E.00302 G1 X-43.766 Y-48.149 E.00618 G1 X-43.809 Y-48.255 E.00426 G1 X-43.757 Y-48.357 E.00426 G1 X-43.672 Y-48.387 E.00336 G1 X-43.551 Y-48.387 E.00452 G1 X-43.447 Y-48.339 E.00426 G1 X-43.414 Y-48.249 E.00355 G1 X-43.414 Y-48.136 E.00422 G1 X-43.462 Y-48.032 E.00426 G1 X-43.533 Y-48.012 E.00277 G1 X-42.957 Y-48.012 F30000 G1 F3000 G1 X-42.957 Y-48.706 E.02586 G1 X-43.005 Y-48.81 E.00426 G1 X-43.094 Y-48.843 E.00355 G1 X-52.907 Y-48.852 E.36549 G1 X-53.258 Y-48.91 E.01326 G1 X-53.632 Y-49.033 E.01468 G1 X-53.952 Y-49.206 E.01352 G1 X-54.35 Y-49.534 E.01924 G1 X-54.486 Y-49.691 E.00773 G1 X-54.662 Y-49.953 E.01174 G1 X-54.846 Y-50.363 E.01674 G1 X-54.915 Y-50.646 E.01083 G1 X-54.957 Y-51.035 E.01459 G1 X-54.941 Y-61.145 E.37658 G1 X-54.847 Y-61.623 E.01812 G1 X-54.699 Y-61.983 E.0145 G1 X-54.549 Y-62.216 E.01035 G1 X-54.234 Y-62.576 E.0178 G1 X-53.866 Y-62.85 E.0171 G1 X-53.523 Y-63.014 E.01414 G1 X-53.151 Y-63.116 E.01438 G1 X-52.765 Y-63.157 E.01444 G1 X32.158 Y-63.157 E3.16306 G1 X32.713 Y-63.074 E.02093 G1 X33.097 Y-62.936 E.01518 G1 X33.215 Y-62.876 E.00492 G1 X33.657 Y-62.557 E.0203 G1 X33.871 Y-62.329 E.01164 G1 X33.983 Y-62.176 E.00708 G1 X34.248 Y-61.629 E.02263 G1 X34.315 Y-61.355 E.01054 G1 X34.357 Y-60.965 E.01458 G1 X34.357 Y-51.032 E.36998 G1 X34.313 Y-50.645 E.01451 G1 X34.21 Y-50.275 E.01428 G1 X34.073 Y-49.974 E.01233 G1 X33.843 Y-49.641 E.01508 G1 X33.537 Y-49.337 E.01607 G1 X33.057 Y-49.046 E.02089 G1 X32.651 Y-48.906 E.01599 G1 X32.232 Y-48.847 E.01578 G1 X22.494 Y-48.843 E.3627 G1 X22.39 Y-48.795 E.00426 G1 X22.357 Y-48.706 E.00355 G1 X22.357 Y-8.293 E1.50524 G1 X22.405 Y-8.189 E.00426 G1 X22.494 Y-8.156 E.00355 G1 X29.262 Y-8.147 E.25211 G1 X29.717 Y-8.077 E.01713 G1 X30.059 Y-7.96 E.01345 G1 X30.332 Y-7.807 E.01166 G1 X30.688 Y-7.524 E.01694 G1 X30.881 Y-7.318 E.01052 G1 X31.049 Y-7.068 E.01121 G1 X31.21 Y-6.738 E.01369 G1 X31.294 Y-6.46 E.01081 G1 X31.352 Y-6.038 E.01586 G1 X31.357 Y60.958 E2.49532 G1 X31.274 Y61.513 E.02093 G1 X31.136 Y61.897 E.01518 G1 X31.076 Y62.015 E.00492 G1 X30.757 Y62.457 E.0203 G1 X30.529 Y62.671 E.01164 G1 X30.376 Y62.783 E.00708 G1 X29.829 Y63.048 E.02263 G1 X29.555 Y63.115 E.01054 G1 X29.165 Y63.157 E.01458 G1 X-49.758 Y63.157 E2.93958 G1 X-50.313 Y63.074 E.02093 G1 X-50.697 Y62.936 E.01518 G1 X-50.815 Y62.876 E.00492 G1 X-51.257 Y62.557 E.0203 G1 X-51.471 Y62.329 E.01164 G1 X-51.583 Y62.176 E.00708 G1 X-51.848 Y61.629 E.02263 G1 X-51.915 Y61.355 E.01054 G1 X-51.957 Y60.965 E.01459 G1 X-51.925 Y-6.28 E2.50461 G1 X-51.849 Y-6.617 E.01289 G1 X-51.699 Y-6.983 E.01472 G1 X-51.548 Y-7.218 E.01042 G1 X-51.319 Y-7.494 E.01335 G1 X-51.107 Y-7.687 E.01069 G1 X-50.849 Y-7.86 E.01156 G1 X-50.374 Y-8.061 E.01923 G1 X-49.963 Y-8.138 E.01554 G1 X-43.094 Y-8.155 E.25587 G1 X-42.99 Y-8.203 E.00426 G1 X-42.957 Y-8.292 E.00354 G1 X-42.957 Y-18.065 E.36401 G1 X-43.005 Y-18.169 E.00426 G1 X-43.094 Y-18.202 E.00355 G1 X-50.76 Y-18.202 E.28553 G1 X-51.387 Y-18.301 E.02364 G1 X-51.622 Y-18.385 E.00931 G1 X-51.912 Y-18.537 E.01217 G1 X-52.236 Y-18.784 E.01519 G1 X-52.538 Y-19.123 E.01691 G1 X-52.802 Y-19.611 E.02067 G1 X-52.909 Y-19.965 E.01375 G1 X-52.932 Y-20.163 E.00745 G1 X-52.943 Y-24.554 E.16352 G1 X-52.881 Y-24.917 E.01373 G1 X-52.761 Y-25.277 E.01413 G1 X-52.662 Y-25.459 E.00773 G1 X-52.323 Y-25.914 E.02113 G1 X-52.113 Y-26.102 E.01049 G1 X-51.75 Y-26.333 E.01603 G1 X-51.473 Y-26.449 E.01121 G1 X-51.078 Y-26.545 E.01511 G1 X-43.094 Y-26.575 E.2974 G1 X-42.99 Y-26.623 E.00426 G1 X-42.957 Y-26.712 E.00354 G1 X-42.957 Y-47.972 E.79185 G1 X-42.5 Y-47.972 F30000 G1 F3000 G1 X-42.5 Y-49.163 E.04437 G1 X-42.547 Y-49.267 E.00426 G1 X-42.637 Y-49.3 E.00355 G1 X-52.836 Y-49.303 E.37987 G1 X-53.105 Y-49.341 E.01014 G1 X-53.502 Y-49.471 E.01553 G1 X-53.727 Y-49.604 E.00975 G1 X-54.01 Y-49.839 E.0137 G1 X-54.102 Y-49.938 E.00503 G1 X-54.288 Y-50.217 E.01249 G1 X-54.402 Y-50.473 E.01042 G1 X-54.461 Y-50.69 E.0084 G1 X-54.5 Y-51.027 E.01263 G1 X-54.493 Y-61.055 E.37351 G1 X-54.423 Y-61.452 E.015 G1 X-54.316 Y-61.734 E.01124 G1 X-54.201 Y-61.92 E.00812 G1 X-53.961 Y-62.209 E.01401 G1 X-53.669 Y-62.438 E.01381 G1 X-53.402 Y-62.573 E.01117 G1 X-53.108 Y-62.661 E.01142 G1 X-52.773 Y-62.7 E.01257 G1 X32.168 Y-62.7 E3.16371 G1 X32.546 Y-62.648 E.01422 G1 X32.951 Y-62.503 E.01601 G1 X33.315 Y-62.254 E.01643 G1 X33.543 Y-62.01 E.01245 G1 X33.61 Y-61.912 E.00443 G1 X33.804 Y-61.522 E.01622 G1 X33.861 Y-61.31 E.00818 G1 X33.9 Y-60.973 E.01264 G1 X33.9 Y-51.024 E.37054 G1 X33.858 Y-50.692 E.01247 G1 X33.771 Y-50.399 E.01139 G1 X33.657 Y-50.163 E.00975 G1 X33.467 Y-49.902 E.01202 G1 X33.216 Y-49.662 E.01293 G1 X32.82 Y-49.437 E.01699 G1 X32.507 Y-49.339 E.01221 G1 X32.173 Y-49.3 E.01254 G1 X22.037 Y-49.3 E.37752 G1 X21.933 Y-49.253 E.00426 G1 X21.9 Y-49.163 E.00355 G1 X21.9 Y-7.836 E1.53927 G1 X21.947 Y-7.732 E.00426 M73 P2 R79 G1 X22.037 Y-7.699 E.00355 G1 X29.272 Y-7.69 E.2695 G1 X29.569 Y-7.645 E.01117 G1 X29.844 Y-7.557 E.01076 G1 X30.038 Y-7.457 E.00814 G1 X30.41 Y-7.16 E.01773 G1 X30.503 Y-7.06 E.00508 G1 X30.638 Y-6.869 E.00872 G1 X30.774 Y-6.6 E.01125 G1 X30.841 Y-6.399 E.00786 G1 X30.895 Y-6.047 E.01327 G1 X30.9 Y60.968 E2.49605 G1 X30.848 Y61.346 E.01422 G1 X30.703 Y61.751 E.01601 G1 X30.454 Y62.115 E.01643 G1 X30.21 Y62.343 E.01245 G1 X30.112 Y62.41 E.00443 G1 X29.722 Y62.604 E.01622 G1 X29.51 Y62.661 E.00818 G1 X29.173 Y62.7 E.01264 G1 X-49.768 Y62.7 E2.94023 G1 X-50.146 Y62.648 E.01422 G1 X-50.551 Y62.503 E.01601 G1 X-50.915 Y62.254 E.01643 G1 X-51.143 Y62.01 E.01245 G1 X-51.21 Y61.912 E.00443 G1 X-51.404 Y61.522 E.01622 G1 X-51.461 Y61.31 E.00818 G1 X-51.5 Y60.973 E.01264 G1 X-51.48 Y-6.175 E2.50099 G1 X-51.424 Y-6.448 E.01039 G1 X-51.316 Y-6.734 E.01139 G1 X-51.201 Y-6.92 E.00812 G1 X-50.961 Y-7.209 E.01401 G1 X-50.862 Y-7.302 E.00506 G1 X-50.584 Y-7.487 E.01243 G1 X-50.286 Y-7.612 E.01205 G1 X-49.975 Y-7.681 E.01186 G1 X-42.637 Y-7.699 E.27331 G1 X-42.533 Y-7.747 E.00426 G1 X-42.5 Y-7.836 E.00355 G1 X-42.5 Y-18.522 E.39801 G1 X-42.547 Y-18.626 E.00426 G1 X-42.637 Y-18.66 E.00355 G1 X-50.771 Y-18.66 E.30295 G1 X-51.232 Y-18.731 E.01738 G1 X-51.415 Y-18.792 E.00719 G1 X-51.636 Y-18.902 E.0092 G1 X-51.898 Y-19.092 E.01205 G1 X-52.138 Y-19.343 E.01293 G1 X-52.365 Y-19.743 E.01712 G1 X-52.456 Y-20.02 E.01088 G1 X-52.475 Y-20.158 E.00517 G1 X-52.493 Y-24.475 E.16081 G1 X-52.447 Y-24.773 E.01124 G1 X-52.356 Y-25.064 E.01133 G1 X-52.294 Y-25.188 E.00517 G1 X-52.018 Y-25.575 E.01771 G1 X-51.866 Y-25.718 E.00778 G1 X-51.584 Y-25.907 E.01262 G1 X-51.286 Y-26.032 E.01205 G1 X-50.975 Y-26.1 E.01186 G1 X-42.637 Y-26.119 E.31056 G1 X-42.533 Y-26.167 E.00426 G1 X-42.5 Y-26.256 E.00355 G1 X-42.5 Y-47.932 E.80734 G1 X-42.043 Y-47.932 F30000 G1 F3000 G1 X-42.043 Y-49.62 E.06289 G1 X-42.09 Y-49.724 E.00426 G1 X-42.18 Y-49.757 E.00355 G1 X-52.784 Y-49.757 E.39498 G1 X-52.966 Y-49.776 E.00679 G1 X-53.28 Y-49.87 E.01222 G1 X-53.426 Y-49.948 E.00617 G1 X-53.724 Y-50.196 E.01445 G1 X-53.871 Y-50.403 E.00943 G1 X-53.963 Y-50.6 E.00811 G1 X-54.006 Y-50.742 E.00551 G1 X-54.043 Y-51.019 E.01044 G1 X-54.043 Y-60.977 E.37088 G1 X-53.994 Y-61.295 E.01198 G1 X-53.922 Y-61.503 E.00819 G1 X-53.856 Y-61.621 E.00504 G1 X-53.604 Y-61.925 E.0147 G1 X-53.397 Y-62.071 E.00943 G1 X-53.2 Y-62.163 E.00811 G1 X-53.058 Y-62.206 E.00551 G1 X-52.781 Y-62.243 E.01044 G1 X32.177 Y-62.243 E3.16435 G1 X32.489 Y-62.195 E.01174 G1 X32.788 Y-62.076 E.01202 G1 X33.051 Y-61.88 E.0122 G1 X33.203 Y-61.706 E.00859 G1 X33.364 Y-61.397 E.01299 G1 X33.406 Y-61.258 E.0054 G1 X33.443 Y-60.981 E.01044 G1 X33.443 Y-51.016 E.37115 G1 X33.424 Y-50.834 E.00679 G1 X33.33 Y-50.52 E.01222 G1 X33.251 Y-50.371 E.00628 G1 X33.099 Y-50.172 E.00934 G1 X32.905 Y-49.997 E.00971 G1 X32.597 Y-49.836 E.01294 G1 X32.458 Y-49.794 E.0054 G1 X32.181 Y-49.757 E.01044 G1 X21.58 Y-49.757 E.39484 G1 X21.476 Y-49.71 E.00426 G1 X21.443 Y-49.62 E.00355 G1 X21.443 Y-7.38 E1.57329 G1 X21.49 Y-7.276 E.00426 G1 X21.58 Y-7.243 E.00355 G1 X29.282 Y-7.233 E.28688 G1 X29.493 Y-7.194 E.008 G1 X29.703 Y-7.122 E.00826 G1 X29.821 Y-7.056 E.00504 G1 X30.125 Y-6.804 E.0147 G1 X30.271 Y-6.597 E.00943 G1 X30.363 Y-6.4 E.0081 G1 X30.406 Y-6.258 E.00551 G1 X30.443 Y-5.981 E.01044 G1 X30.443 Y60.977 E2.49392 G1 X30.395 Y61.289 E.01174 G1 X30.276 Y61.588 E.01202 G1 X30.08 Y61.851 E.0122 G1 X29.906 Y62.003 E.00859 G1 X29.597 Y62.164 E.01299 G1 X29.458 Y62.206 E.0054 G1 X29.181 Y62.243 E.01044 G1 X-49.777 Y62.243 E2.94087 G1 X-50.089 Y62.195 E.01174 G1 X-50.388 Y62.076 E.01202 G1 X-50.651 Y61.88 E.0122 G1 X-50.803 Y61.706 E.00859 G1 X-50.964 Y61.397 E.01299 G1 X-51.006 Y61.258 E.0054 G1 X-51.043 Y60.981 E.01044 G1 X-51.033 Y-6.082 E2.49783 G1 X-50.994 Y-6.293 E.00799 G1 X-50.922 Y-6.503 E.00826 G1 X-50.856 Y-6.621 E.00504 G1 X-50.604 Y-6.925 E.0147 G1 X-50.397 Y-7.071 E.00943 G1 X-50.2 Y-7.163 E.00811 G1 X-49.87 Y-7.236 E.0126 G1 X-42.18 Y-7.243 E.28642 G1 X-42.076 Y-7.291 E.00426 G1 X-42.043 Y-7.38 E.00355 G1 X-42.043 Y-18.98 E.43204 G1 X-42.09 Y-19.083 E.00426 G1 X-42.18 Y-19.117 E.00355 G1 X-50.781 Y-19.117 E.32037 G1 X-51.075 Y-19.16 E.01106 G1 X-51.278 Y-19.229 E.00797 G1 X-51.429 Y-19.309 E.00637 G1 X-51.628 Y-19.461 E.00934 G1 X-51.803 Y-19.654 E.00971 G1 X-51.965 Y-19.964 E.01302 G1 X-52.018 Y-20.151 E.00724 G1 X-52.043 Y-24.395 E.15808 G1 X-51.994 Y-24.714 E.01203 G1 X-51.922 Y-24.922 E.00818 G1 X-51.697 Y-25.25 E.01483 G1 X-51.608 Y-25.341 E.00471 G1 X-51.397 Y-25.49 E.00964 G1 X-51.2 Y-25.583 E.00811 G1 X-50.87 Y-25.655 E.0126 G1 X-42.18 Y-25.662 E.32366 G1 X-42.076 Y-25.71 E.00426 G1 X-42.043 Y-25.799 E.00355 G1 X-42.043 Y-47.892 E.82286 G1 X-41.586 Y-47.892 F30000 G1 F3000 G1 X-41.586 Y-50.077 E.0814 G1 X-41.633 Y-50.181 E.00426 G1 X-41.723 Y-50.214 E.00355 G1 X-52.791 Y-50.214 E.41226 G1 X-52.918 Y-50.23 E.00475 G1 X-53.143 Y-50.306 E.00884 G1 X-53.361 Y-50.473 E.01023 G1 X-53.452 Y-50.586 E.00541 G1 X-53.554 Y-50.803 E.00892 G1 X-53.586 Y-51.011 E.00781 G1 X-53.586 Y-60.988 E.37161 G1 X-53.543 Y-61.221 E.00884 G1 X-53.496 Y-61.34 E.00475 G1 X-53.327 Y-61.561 E.01037 G1 X-53.214 Y-61.652 E.00541 G1 X-52.997 Y-61.754 E.00892 G1 X-52.789 Y-61.786 E.00781 G1 X32.188 Y-61.786 E3.16507 G1 X32.418 Y-61.743 E.00871 G1 X32.609 Y-61.656 E.00783 G1 X32.761 Y-61.527 E.00743 G1 X32.852 Y-61.414 E.00541 G1 X32.954 Y-61.197 E.00892 G1 X32.986 Y-60.989 E.00782 G1 X32.986 Y-51.009 E.37175 G1 X32.97 Y-50.882 E.00475 G1 X32.894 Y-50.657 E.00884 G1 X32.727 Y-50.439 E.01023 G1 X32.614 Y-50.348 E.00541 G1 X32.397 Y-50.246 E.00892 G1 X32.189 Y-50.214 E.00782 G1 X21.123 Y-50.214 E.41219 G1 X21.019 Y-50.167 E.00426 G1 X20.986 Y-50.077 E.00355 G1 X20.986 Y-6.923 E1.60734 G1 X21.033 Y-6.819 E.00426 G1 X21.123 Y-6.786 E.00355 G1 X29.188 Y-6.786 E.30038 G1 X29.421 Y-6.743 E.00884 G1 X29.54 Y-6.696 E.00475 G1 X29.761 Y-6.527 E.01037 G1 X29.852 Y-6.414 E.00541 G1 X29.954 Y-6.197 E.00892 G1 X29.986 Y-5.989 E.00782 G1 X29.986 Y60.988 E2.49464 G1 X29.943 Y61.218 E.00872 G1 X29.856 Y61.409 E.00783 G1 X29.727 Y61.561 E.00743 G1 X29.614 Y61.652 E.00541 G1 X29.397 Y61.754 E.00892 G1 X29.189 Y61.786 E.00782 G1 X-49.788 Y61.786 E2.94159 G1 X-50.018 Y61.743 E.00872 M73 P2 R78 G1 X-50.209 Y61.656 E.00783 G1 X-50.361 Y61.527 E.00743 G1 X-50.452 Y61.414 E.00541 G1 X-50.554 Y61.197 E.00892 G1 X-50.586 Y60.989 E.00781 G1 X-50.586 Y-5.988 E2.49464 G1 X-50.543 Y-6.221 E.00884 G1 X-50.496 Y-6.34 E.00475 G1 X-50.327 Y-6.561 E.01037 G1 X-50.214 Y-6.652 E.00541 G1 X-49.997 Y-6.754 E.00892 G1 X-49.789 Y-6.786 E.00781 G1 X-41.723 Y-6.786 E.30046 G1 X-41.619 Y-6.833 E.00426 G1 X-41.586 Y-6.923 E.00355 G1 X-41.586 Y-19.437 E.46609 G1 X-41.633 Y-19.541 E.00426 G1 X-41.723 Y-19.574 E.00355 G1 X-50.791 Y-19.574 E.33777 G1 X-50.918 Y-19.59 E.00475 G1 X-51.143 Y-19.665 E.00884 G1 X-51.361 Y-19.832 E.01023 G1 X-51.452 Y-19.946 E.00541 G1 X-51.555 Y-20.166 E.00906 G1 X-51.573 Y-20.253 E.00331 G1 X-51.586 Y-24.407 E.15474 G1 X-51.543 Y-24.64 E.00884 G1 X-51.496 Y-24.759 E.00475 G1 X-51.327 Y-24.981 E.01037 G1 X-51.214 Y-25.071 E.00541 G1 X-50.997 Y-25.173 E.00892 G1 X-50.789 Y-25.205 E.00781 G1 X-41.723 Y-25.205 E.3377 G1 X-41.619 Y-25.253 E.00426 G1 X-41.586 Y-25.342 E.00355 G1 X-41.586 Y-47.852 E.8384 G1 X-41.129 Y-47.852 F30000 G1 F3000 G1 X-41.129 Y-50.671 E.10502 G1 X-52.8 Y-50.671 E.43472 G1 X-52.911 Y-50.7 E.00426 G1 X-52.995 Y-50.747 E.00361 G1 X-53.104 Y-50.884 E.00652 G1 X-53.129 Y-51 E.00442 G1 X-53.129 Y-61 E.37246 G1 X-53.1 Y-61.111 E.00426 G1 X-53.053 Y-61.195 E.00361 G1 X-52.916 Y-61.304 E.00652 G1 X-52.8 Y-61.329 E.00442 G1 X32.2 Y-61.329 E3.16593 G1 X32.311 Y-61.3 E.00426 G1 X32.395 Y-61.253 E.00361 G1 X32.504 Y-61.116 E.00652 G1 X32.529 Y-61 E.00442 G1 X32.529 Y-51 E.37246 G1 X32.5 Y-50.889 E.00426 G1 X32.453 Y-50.805 E.00361 G1 X32.316 Y-50.696 E.00652 G1 X32.2 Y-50.671 E.00442 G1 X20.529 Y-50.671 E.43472 G1 X20.529 Y-6.329 E1.65161 G1 X29.2 Y-6.329 E.32298 G1 X29.311 Y-6.3 E.00426 G1 X29.395 Y-6.253 E.00361 G1 X29.504 Y-6.116 E.00652 G1 X29.529 Y-6 E.00442 G1 X29.529 Y61 E2.4955 G1 X29.5 Y61.111 E.00426 G1 X29.453 Y61.195 E.00361 G1 X29.316 Y61.304 E.00652 G1 X29.2 Y61.329 E.00442 G1 X-49.8 Y61.329 E2.94245 G1 X-49.911 Y61.3 E.00426 G1 X-49.995 Y61.253 E.00361 G1 X-50.104 Y61.116 E.00652 G1 X-50.129 Y61 E.00442 G1 X-50.129 Y-6 E2.4955 G1 X-50.1 Y-6.111 E.00426 G1 X-50.053 Y-6.195 E.00361 G1 X-49.916 Y-6.304 E.00652 G1 X-49.8 Y-6.329 E.00442 G1 X-41.129 Y-6.329 E.32298 G1 X-41.129 Y-47.812 E1.54509 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-41.129 Y-49.812 ;WIPE_END G1 X-40.058 Y-42.255 Z.6 F30000 G1 X-37.158 Y-21.773 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-37.158 Y-20.807 E.03596 G1 X-37.253 Y-21.033 E.00913 G1 X-37.286 Y-21.289 E.00962 G1 X-37.253 Y-21.543 E.00954 G1 X-37.173 Y-21.736 E.00776 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-37.158 Y-20.807 G1 X-37.253 Y-21.033 G1 X-37.286 Y-21.289 G1 X-37.253 Y-21.543 G1 X-37.173 Y-21.736 ;WIPE_END G1 X-41.271 Y-21.736 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-41.271 Y-20.359 E.05127 G1 X-41.3 Y-20.249 E.00426 G1 X-41.347 Y-20.164 E.00361 G1 X-41.484 Y-20.055 E.00652 G1 X-41.6 Y-20.031 E.00442 G1 X-50.8 Y-20.031 E.34267 G1 X-50.911 Y-20.059 E.00426 G1 X-50.995 Y-20.106 E.00361 G1 X-51.104 Y-20.243 E.00652 G1 X-51.129 Y-20.359 E.00442 G1 X-51.129 Y-24.419 E.15122 G1 X-51.1 Y-24.53 E.00426 G1 X-51.053 Y-24.615 E.00361 G1 X-50.916 Y-24.724 E.00652 G1 X-50.8 Y-24.748 E.00442 G1 X-41.6 Y-24.748 E.34267 G1 X-41.489 Y-24.719 E.00426 G1 X-41.405 Y-24.672 E.00361 G1 X-41.296 Y-24.536 E.00652 G1 X-41.271 Y-24.419 E.00442 G1 X-41.271 Y-21.776 E.09846 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-41.271 Y-20.359 G1 X-41.3 Y-20.249 G1 X-41.347 Y-20.164 G1 X-41.484 Y-20.055 G1 X-41.6 Y-20.031 G1 X-41.679 Y-20.031 ;WIPE_END G1 X-41.005 Y-12.428 Z.6 F30000 G1 X-40.4 Y-5.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-40.4 Y-51.4 E1.70588 G1 X-52.4 Y-51.4 E.44695 G1 X-52.4 Y-60.6 E.34267 G1 X31.8 Y-60.6 E3.13613 G1 X31.8 Y-51.4 E.34267 G1 X19.8 Y-51.4 E.44695 G1 X19.8 Y-5.6 E1.70588 G1 X28.8 Y-5.6 E.33522 G1 X28.802 Y-1.997 E.13419 G2 X28.895 Y-.482 I14.779 J-.147 E.05656 G1 X28.916 Y0 E.01798 G3 X28.813 Y1.489 I-57.842 J-3.244 E.05561 G2 X28.8 Y2.5 I27.747 J.86 E.03763 G1 X28.8 Y60.6 E2.16402 G2 X26.181 Y60.627 I-.876 J42.584 E.09757 G2 X25.183 Y60.75 I1.689 J17.78 E.03746 G1 X23.217 Y60.75 E.07321 G2 X20.701 Y60.6 I-2.072 J13.576 E.09404 M73 P3 R78 G1 X-41.801 Y60.6 E2.32794 G2 X-43.817 Y60.75 I-.162 J11.472 E.0754 G1 X-45.783 Y60.75 E.07321 G2 X-47.799 Y60.6 I-1.854 J11.321 E.0754 G1 X-49.4 Y60.6 E.05963 G1 X-49.4 Y2.5 E2.16402 G2 X-49.495 Y.482 I-21.305 J-.01 E.07525 G3 X-49.445 Y-.98 I7.662 J-.472 E.05456 G2 X-49.402 Y-1.997 I-12.182 J-1.03 E.03794 G1 X-49.4 Y-5.6 E.13419 G1 X-40.44 Y-5.6 E.33373 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-40.438 Y-7.6 ;WIPE_END G1 X-34.942 Y-12.896 Z.6 F30000 G1 X7.3 Y-53.6 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X7.3 Y-59.4 E.21603 G1 X14.1 Y-59.4 E.25327 G1 X14.1 Y-53.6 E.21603 G1 X7.34 Y-53.6 E.25178 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X7.326 Y-55.6 ;WIPE_END G1 X-.294 Y-55.167 Z.6 F30000 G1 X-27.9 Y-53.6 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-34.7 Y-53.6 E.25327 G1 X-34.7 Y-59.4 E.21603 G1 X-27.9 Y-59.4 E.25327 G1 X-27.9 Y-53.64 E.21454 G1 X-27.9 Y-53.1 F30000 ;TYPE:Inner wall G1 F3000 G1 X-27.4 Y-53.1 E.01862 G1 X-27.4 Y-60.1 E.26072 G1 X6.8 Y-60.1 E1.27382 G1 X6.8 Y-53.1 E.26072 G1 X14.6 Y-53.1 E.29052 G1 X14.6 Y-60.1 E.26072 G1 X31.3 Y-60.1 E.62201 G1 X31.3 Y-51.9 E.30542 G1 X19.3 Y-51.9 E.44695 G1 X19.3 Y-5.1 E1.74312 G1 X28.3 Y-5.1 E.33523 G1 X28.302 Y-1.967 E.1167 G2 X28.302 Y1.967 I-2.099 J1.967 E.51182 G1 X28.3 Y60.1 E2.16525 G2 X26.195 Y60.126 I-.623 J35.402 E.07844 G1 X26.405 Y59.63 E.02007 G2 X21.995 Y59.63 I-2.205 J-.637 E.3166 G1 X22.205 Y60.126 E.02007 G2 X20.702 Y60.1 I-1.076 J19.013 E.05603 G1 X-41.803 Y60.1 E2.32805 G2 X-42.805 Y60.126 I-.147 J13.986 E.03735 G1 X-42.595 Y59.63 E.02007 G2 X-47.005 Y59.63 I-2.205 J-.636 E.31659 G1 X-46.795 Y60.126 E.02007 G2 X-48.9 Y60.1 I-1.482 J35.426 E.07843 G1 X-48.902 Y1.967 E2.16525 G2 X-48.902 Y-1.967 I2.099 J-1.967 E.51182 G1 X-48.9 Y-5.1 E.1167 G1 X-39.9 Y-5.1 E.33523 G1 X-39.9 Y-51.9 E1.74312 G1 X-51.9 Y-51.9 E.44695 G1 X-51.9 Y-60.1 E.30542 G1 X-35.2 Y-60.1 E.62201 G1 X-35.2 Y-53.1 E.26072 G1 X-27.94 Y-53.1 E.27041 G1 X-27.9 Y-52.643 F30000 G1 F3000 G1 X-26.943 Y-52.643 E.03565 G1 X-26.943 Y-59.643 E.26072 G1 X6.343 Y-59.643 E1.23977 G1 X6.343 Y-52.643 E.26072 G1 X15.057 Y-52.643 E.32457 G1 X15.057 Y-59.643 E.26072 G1 X30.843 Y-59.643 E.58796 G1 X30.843 Y-52.357 E.27137 G1 X18.843 Y-52.357 E.44695 G1 X18.843 Y-4.643 E1.77717 G1 X27.844 Y-4.643 E.33524 G1 X27.844 Y-2.906 E.06471 G2 X27.843 Y2.906 I-1.638 J2.905 E.51781 G1 X27.843 Y59.643 E2.11323 G2 X26.87 Y59.646 I-.315 J62.379 E.03624 G2 X21.53 Y59.646 I-2.67 J-.656 E.37112 G1 X-42.13 Y59.646 E2.3711 G2 X-47.47 Y59.646 I-2.67 J-.656 E.3711 G2 X-48.443 Y59.643 I-.658 J62.443 E.03624 G1 X-48.443 Y2.906 E2.11323 G2 X-48.444 Y-2.906 I1.637 J-2.906 E.51781 G1 X-48.444 Y-4.643 E.06471 G1 X-39.443 Y-4.643 E.33524 G1 X-39.443 Y-20.411 E.5873 G1 X-39.213 Y-20.449 E.00867 G2 X-39.213 Y-22.127 I2.915 J-.839 E.64652 G1 X-39.443 Y-22.165 E.00867 G1 X-39.443 Y-38.411 E.60509 G1 X-39.213 Y-38.449 E.00867 G2 X-39.213 Y-40.127 I2.915 J-.839 E.64645 G1 X-39.443 Y-40.165 E.00867 G1 X-39.443 Y-52.357 E.4541 G1 X-51.443 Y-52.357 E.44695 G1 X-51.443 Y-59.643 E.27137 G1 X-35.657 Y-59.643 E.58796 G1 X-35.657 Y-52.643 E.26072 G1 X-27.94 Y-52.643 E.28743 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-26.943 Y-52.643 G1 X-26.943 Y-53.646 ;WIPE_END G1 X-23.111 Y-47.045 Z.6 F30000 G1 X26.6 Y38.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X26.6 Y51.4 E.47675 G1 X22.8 Y51.4 E.14154 G1 X22.8 Y38.6 E.47675 G1 X26.56 Y38.6 E.14005 G1 X26.6 Y38.1 F30000 ;TYPE:Inner wall G1 F3000 G1 X27.1 Y38.1 E.01862 G1 X27.1 Y51.9 E.514 G1 X22.3 Y51.9 E.17878 G1 X22.3 Y38.1 E.514 G1 X26.56 Y38.1 E.15867 G1 X26.6 Y37.643 F30000 G1 F3000 G1 X27.557 Y37.643 E.03565 G1 X27.557 Y52.357 E.54805 G1 X21.843 Y52.357 E.21283 G1 X21.843 Y37.643 E.54805 G1 X26.56 Y37.643 E.17569 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X27.557 Y37.643 G1 X27.557 Y38.646 ;WIPE_END G1 X26.6 Y31.4 Z.6 F30000 G1 Z.2 M73 P3 R77 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X22.8 Y31.4 E.14154 G1 X22.8 Y18.6 E.47675 G1 X26.6 Y18.6 E.14154 G1 X26.6 Y31.36 E.47526 G1 X27.1 Y31.4 F30000 ;TYPE:Inner wall G1 F3000 G1 X27.1 Y31.9 E.01862 G1 X22.3 Y31.9 E.17878 G1 X22.3 Y18.1 E.514 G1 X27.1 Y18.1 E.17878 G1 X27.1 Y31.36 E.49388 G1 X27.557 Y31.4 F30000 G1 F3000 G1 X27.557 Y32.357 E.03565 G1 X21.843 Y32.357 E.21283 G1 X21.843 Y17.643 E.54805 G1 X27.557 Y17.643 E.21283 G1 X27.557 Y31.36 E.51091 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X27.557 Y32.357 G1 X26.554 Y32.357 ;WIPE_END G1 X18.93 Y32.711 Z.6 F30000 G1 X4.1 Y33.4 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-24.7 Y33.4 E1.07269 G1 X-24.7 Y24.6 E.32777 G1 X4.1 Y24.6 E1.07269 G1 X4.1 Y33.36 E.32628 G1 X4.1 Y33.9 F30000 ;TYPE:Inner wall G1 F3000 G1 X-25.2 Y33.9 E1.09131 G1 X-25.2 Y24.1 E.36501 G1 X4.6 Y24.1 E1.10994 G1 X4.6 Y33.9 E.36501 G1 X4.14 Y33.9 E.01713 G1 X4.1 Y34.357 F30000 G1 F3000 G1 X-25.657 Y34.357 E1.10834 G1 X-25.657 Y23.643 E.39906 G1 X5.057 Y23.643 E1.14399 G1 X5.057 Y34.357 E.39906 G1 X4.14 Y34.357 E.03416 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X2.14 Y34.357 ;WIPE_END G1 X3.274 Y41.905 Z.6 F30000 G1 X4.1 Y47.4 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-24.7 Y47.4 E1.07269 G1 X-24.7 Y38.6 E.32777 G1 X4.1 Y38.6 E1.07269 G1 X4.1 Y47.36 E.32628 G1 X4.1 Y47.9 F30000 M73 P4 R77 ;TYPE:Inner wall G1 F3000 G1 X-25.2 Y47.9 E1.09131 G1 X-25.2 Y38.1 E.36501 G1 X4.6 Y38.1 E1.10994 G1 X4.6 Y47.9 E.36501 G1 X4.14 Y47.9 E.01713 G1 X4.1 Y48.357 F30000 G1 F3000 G1 X-25.657 Y48.357 E1.10834 G1 X-25.657 Y37.643 E.39906 G1 X5.057 Y37.643 E1.14399 G1 X5.057 Y48.357 E.39906 G1 X4.14 Y48.357 E.03416 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X2.14 Y48.357 ;WIPE_END G1 X-5.475 Y48.866 Z.6 F30000 G1 X-43.4 Y51.4 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-47.2 Y51.4 E.14154 G1 X-47.2 Y38.6 E.47675 G1 X-43.4 Y38.6 E.14154 G1 X-43.4 Y51.36 E.47526 G1 X-42.9 Y51.4 F30000 ;TYPE:Inner wall G1 F3000 G1 X-42.9 Y51.9 E.01862 G1 X-47.7 Y51.9 E.17878 G1 X-47.7 Y38.1 E.514 G1 X-42.9 Y38.1 E.17878 G1 X-42.9 Y51.36 E.49388 G1 X-42.443 Y51.4 F30000 G1 F3000 G1 X-42.443 Y52.357 E.03565 G1 X-48.157 Y52.357 E.21283 G1 X-48.157 Y37.643 E.54805 G1 X-42.443 Y37.643 E.21283 G1 X-42.443 Y51.36 E.51091 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-42.443 Y52.357 G1 X-43.446 Y52.357 ;WIPE_END G1 X-43.429 Y44.725 Z.6 F30000 G1 X-43.4 Y31.4 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-47.2 Y31.4 E.14154 G1 X-47.2 Y18.6 E.47675 G1 X-43.4 Y18.6 E.14154 G1 X-43.4 Y31.36 E.47526 G1 X-42.9 Y31.4 F30000 ;TYPE:Inner wall G1 F3000 G1 X-42.9 Y31.9 E.01862 G1 X-47.7 Y31.9 E.17878 G1 X-47.7 Y18.1 E.514 G1 X-42.9 Y18.1 E.17878 G1 X-42.9 Y31.36 E.49388 G1 X-42.443 Y31.4 F30000 G1 F3000 G1 X-42.443 Y32.357 E.03565 G1 X-48.157 Y32.357 E.21283 G1 X-48.157 Y17.643 E.54805 G1 X-42.443 Y17.643 E.21283 G1 X-42.443 Y31.36 E.51091 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-42.443 Y32.357 G1 X-43.446 Y32.357 ;WIPE_END G1 X-41.08 Y25.101 Z.6 F30000 G1 X-19.723 Y-40.389 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-19.574 Y-40.561 E.00847 G3 X-18.766 Y-41.028 I1.273 J1.271 E.03515 G1 X-18.535 Y-41.074 E.00877 G3 X-19.748 Y-40.358 I.235 J1.784 E.3671 G1 X-20.101 Y-40.717 F30000 ;TYPE:Inner wall G1 F3000 G1 X-19.929 Y-40.914 E.00973 G3 X-18.896 Y-41.512 I1.628 J1.624 E.04496 G1 X-18.6 Y-41.57 E.01121 G3 X-20.131 Y-40.683 I.3 J2.28 E.4705 G1 X-20.127 Y-40.687 E.00022 G1 X-20.446 Y-41.017 F30000 G1 F3000 G1 X-20.253 Y-41.237 E.01089 G3 X-19.014 Y-41.954 I1.953 J1.946 E.05393 G1 X-18.66 Y-42.024 E.01345 G3 X-20.494 Y-40.961 I.36 J2.733 E.56415 G1 X-20.472 Y-40.987 E.00129 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-20.253 Y-41.237 G1 X-19.98 Y-41.478 G1 X-19.687 Y-41.673 G1 X-19.359 Y-41.837 G1 X-19.014 Y-41.954 G1 X-18.798 Y-41.997 ;WIPE_END G1 X-17.957 Y-34.411 Z.6 F30000 G1 X-16.548 Y-21.692 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-16.518 Y-21.523 E.0064 G3 X-18.3 Y-19.487 I-1.785 J.235 E.11398 G3 X-18.535 Y-23.074 I.004 J-1.801 E.20167 G3 X-16.564 Y-21.753 I.231 J1.786 E.09646 G1 X-16.558 Y-21.73 E.00087 G1 X-16.058 Y-21.789 F30000 ;TYPE:Inner wall G1 F3000 G1 X-16.02 Y-21.588 E.00762 G3 X-18.896 Y-23.512 I-2.28 J.298 E.39229 G1 X-18.6 Y-23.57 E.01122 G3 X-16.079 Y-21.883 I.3 J2.28 E.12341 G1 X-16.066 Y-21.828 E.0021 G1 X-15.609 Y-21.879 F30000 G1 F3000 G1 X-15.567 Y-21.648 E.00873 G3 X-19.014 Y-23.954 I-2.734 J.357 E.47035 G1 X-18.66 Y-24.024 E.01345 G3 X-15.637 Y-22.002 I.36 J2.733 E.14796 G1 X-15.618 Y-21.918 E.00321 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-15.567 Y-21.648 G1 X-15.54 Y-21.288 G1 X-15.564 Y-20.928 G1 X-15.634 Y-20.574 G1 X-15.75 Y-20.232 G1 X-15.875 Y-19.979 ;WIPE_END G1 X-19.263 Y-13.14 Z.6 F30000 G1 X-29.055 Y6.623 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-29.206 Y6.786 E.00826 G3 X-29.831 Y7.136 I-.981 J-1.017 E.02699 G3 X-30.535 Y3.615 I-.467 J-1.738 E.21928 G3 X-28.91 Y4.398 I.243 J1.571 E.07144 G2 X-28.706 Y4.973 I13.106 J-4.345 E.02271 G3 X-28.839 Y6.194 I-1.738 J.427 E.04669 G3 X-29.036 Y6.588 I-1.347 J-.425 E.01649 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-29.206 Y6.786 G1 X-29.394 Y6.938 G1 X-29.606 Y7.055 G1 X-29.831 Y7.136 G1 X-30.064 Y7.184 G1 X-30.3 Y7.201 G1 X-30.535 Y7.185 G1 X-30.759 Y7.141 G1 X-30.833 Y7.116 ;WIPE_END G1 X-23.875 Y10.254 Z.6 F30000 G1 X-16.9 Y13.4 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-28.5 Y13.4 E.43206 G1 X-28.5 Y7.999 E.20118 G3 X-28.401 Y6.471 I9.672 J-.143 E.05709 G1 X-28.35 Y5.987 E.01812 G2 X-28.36 Y4.523 I-36.725 J-.492 E.05451 G3 X-28.498 Y3.003 I7.877 J-1.486 E.05694 G3 X-28.5 Y-1.4 I736.461 J-2.469 E.164 G1 X-16.9 Y-1.4 E.43206 G1 X-16.9 Y13.36 E.54975 G1 X-16.4 Y13.4 F30000 ;TYPE:Inner wall G1 F3000 G1 X-16.4 Y13.9 E.01862 G1 X-29 Y13.9 E.4693 G1 X-28.993 Y7.288 E.24627 G3 X-29.399 Y3.288 I-1.304 J-1.888 E.35456 G1 X-28.987 Y3.515 E.01753 G3 X-29 Y2.501 I25.82 J-.838 E.03778 G1 X-29 Y-1.9 E.16392 G1 X-16.4 Y-1.9 E.4693 G1 X-16.4 Y13.36 E.56838 G1 X-15.943 Y13.4 F30000 G1 F3000 G1 X-15.943 Y14.357 E.03565 G1 X-29.457 Y14.357 E.50335 G1 X-29.457 Y8.036 E.23545 G3 X-32.49 Y7.08 I-.821 J-2.686 E.1259 G3 X-29.935 Y2.665 I2.192 J-1.679 E.24227 G1 X-29.456 Y2.764 E.01823 G3 X-29.457 Y-2.357 I858.642 J-2.711 E.19076 G1 X-15.943 Y-2.357 E.50335 G1 X-15.943 Y13.36 E.5854 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-15.943 Y14.357 G1 X-16.946 Y14.357 ;WIPE_END G1 X-9.861 Y11.518 Z.6 F30000 G1 X8.455 Y4.178 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X8.601 Y4.009 E.00831 G3 X9.231 Y3.664 I.947 J.981 E.02709 G1 X9.464 Y3.616 E.00884 G3 X8.794 Y6.938 I.246 J1.778 E.25507 G3 X8.24 Y6.194 I.737 J-1.128 E.0353 G3 X8.24 Y4.606 I1.609 J-.794 E.06126 G3 X8.43 Y4.209 I1.309 J.384 E.01647 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X8.601 Y4.009 G1 X8.789 Y3.866 G1 X9.005 Y3.746 G1 X9.231 Y3.664 G1 X9.464 Y3.616 G1 X9.693 Y3.6 G1 X9.934 Y3.614 G1 X10.166 Y3.661 G1 X10.23 Y3.682 ;WIPE_END G1 X7.9 Y-1.4 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X7.898 Y3.003 E.16399 G3 X7.76 Y4.523 I-8.017 J.034 E.05696 G2 X7.75 Y5.987 I36.719 J.971 E.05451 G3 X7.895 Y7.492 I-21.701 J2.846 E.05633 G1 X7.9 Y13.4 E.22005 G1 X-3.7 Y13.4 E.43206 G1 X-3.7 Y-1.4 E.55124 G1 X7.86 Y-1.4 E.43057 G1 X8.399 Y-1.399 F30000 ;TYPE:Inner wall G1 F3000 G1 X8.387 Y3.518 E.18312 G3 X10.581 Y3.273 I1.322 J1.901 E.08571 G3 X8.393 Y7.288 I-.881 J2.123 E.28709 G1 X8.4 Y13.9 E.24627 G1 X-4.2 Y13.9 E.4693 G1 X-4.2 Y-1.9 E.58849 G1 X8.4 Y-1.9 E.46931 G1 X8.399 Y-1.439 E.01718 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X8.394 Y.561 ;WIPE_END G1 X7.9 Y-2.357 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X8.858 Y-2.357 E.03566 G1 X8.856 Y2.765 E.19076 G3 X11.89 Y3.72 I.822 J2.684 E.12596 G3 X9.333 Y8.135 I-2.19 J1.68 E.24244 G1 X8.857 Y8.036 E.01811 G1 X8.857 Y14.357 E.23544 G1 X-4.657 Y14.357 E.50335 G1 X-4.657 Y-2.357 E.62254 G1 X7.86 Y-2.357 E.46622 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X8.858 Y-2.357 G1 X8.857 Y-1.355 ;WIPE_END G1 X3.067 Y-6.327 Z.6 F30000 G1 X-34.386 Y-38.486 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-34.505 Y-38.252 E.0098 G3 X-36.837 Y-41.293 I-1.795 J-1.038 E.30324 G1 X-36.571 Y-41.346 E.01011 G3 X-34.374 Y-38.524 I.27 J2.056 E.16066 G1 X-33.937 Y-38.265 F30000 ;TYPE:Inner wall G1 F3000 G1 X-34.072 Y-38.002 E.01102 G3 X-36.967 Y-41.777 I-2.228 J-1.289 E.37643 G1 X-36.636 Y-41.843 E.01256 G3 X-33.923 Y-38.304 I.336 J2.552 E.20088 G1 X-33.924 Y-38.303 E.00003 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-34.072 Y-38.002 G1 X-34.256 Y-37.719 G1 X-34.478 Y-37.466 G1 X-34.731 Y-37.244 G1 X-35.012 Y-37.056 G1 X-35.295 Y-36.916 ;WIPE_END G1 X-36.786 Y-29.431 Z.6 F30000 G1 X-38.36 Y-21.528 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-38.357 Y-21.559 E.00117 G3 X-36.837 Y-23.293 I2.056 J.269 E.09106 G1 X-36.571 Y-23.346 E.01011 G3 X-38.374 Y-21.287 I.271 J2.056 E.37394 G1 X-38.362 Y-21.488 E.00749 G1 X-38.859 Y-21.56 F30000 ;TYPE:Inner wall G1 F3000 G1 X-38.853 Y-21.624 E.00239 G3 X-36.967 Y-23.777 I2.552 J.333 E.11304 G1 X-36.636 Y-23.843 E.01255 G3 X-38.875 Y-21.285 I.336 J2.552 E.46415 G1 X-38.861 Y-21.52 E.00877 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-38.853 Y-21.624 G1 X-38.789 Y-21.955 G1 X-38.681 Y-22.274 G1 X-38.532 Y-22.577 G1 X-38.344 Y-22.857 G1 X-38.122 Y-23.11 G1 X-37.964 Y-23.249 ;WIPE_END G1 X-41.334 Y-16.401 Z.6 F30000 G1 X-48.91 Y-1.009 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-48.882 Y-1.09 E.00319 G3 X-47.033 Y-2.364 I2.057 J1.007 E.08742 G3 X-48.638 Y1.498 I.228 J2.359 E.3639 G3 X-49.054 Y.21 I1.658 J-1.247 E.05136 G3 X-48.949 Y-.86 I3.535 J-.195 E.04019 G1 X-48.92 Y-.97 E.00426 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-48.882 Y-1.09 G1 X-48.638 Y-1.498 G1 X-48.308 Y-1.835 G1 X-48.12 Y-1.975 G1 X-47.709 Y-2.195 G1 X-47.492 Y-2.261 ;WIPE_END G1 X-47.347 Y5.371 Z.6 F30000 G1 X-46.315 Y59.89 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-46.424 Y59.694 E.00832 G3 X-46.464 Y58.311 I1.439 J-.734 E.05327 G3 X-45.035 Y57.215 I1.666 J.693 E.07023 G3 X-43.167 Y59.699 I.253 J1.754 E.14119 G3 X-43.462 Y60.091 I-1.221 J-.61 E.01838 G1 X-43.975 Y60.43 E.02289 G3 X-45.625 Y60.43 I-.825 J-1.429 E.06432 G1 X-46.138 Y60.091 E.02289 G3 X-46.287 Y59.916 I1.153 J-1.131 E.00857 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-46.424 Y59.694 G1 X-46.527 Y59.476 G1 X-46.581 Y59.239 G1 X-46.599 Y59.002 G1 X-46.585 Y58.766 G1 X-46.539 Y58.534 G1 X-46.464 Y58.311 G1 X-46.36 Y58.1 G1 X-46.319 Y58.039 ;WIPE_END G1 X-38.689 Y58.244 Z.6 F30000 G1 X22.685 Y59.89 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X22.576 Y59.694 E.00832 G3 X22.536 Y58.311 I1.438 J-.734 E.05327 G3 X23.965 Y57.215 I1.664 J.689 E.07024 G3 X25.832 Y59.699 I.253 J1.754 E.14119 G3 X25.542 Y60.086 I-1.205 J-.6 E.01813 G1 X25.025 Y60.43 E.02312 G3 X23.375 Y60.43 I-.825 J-1.429 E.06433 G1 X22.862 Y60.091 E.02289 G3 X22.713 Y59.916 I1.153 J-1.131 E.00857 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X22.576 Y59.694 G1 X22.473 Y59.476 G1 X22.419 Y59.239 G1 X22.401 Y59.002 G1 X22.415 Y58.766 G1 X22.461 Y58.534 G1 X22.536 Y58.311 G1 X22.64 Y58.1 G1 X22.681 Y58.039 ;WIPE_END G1 X23.433 Y50.444 Z.6 F30000 G1 X28.339 Y.925 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X28.282 Y1.09 E.00651 G3 X24.693 Y1.836 I-2.089 J-1.043 E.15701 G3 X25.967 Y-2.364 I1.525 J-1.831 E.20782 G3 X28.282 Y-1.09 I.242 J2.3 E.10476 G3 X28.352 Y.86 I-3.17 J1.09 E.07377 G1 X28.347 Y.885 E.00095 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X28.282 Y1.09 G1 X28.038 Y1.498 G1 X27.708 Y1.835 G1 X27.32 Y2.095 G1 X27.109 Y2.195 G1 X26.977 Y2.235 ;WIPE_END G1 X27.025 Y9.867 Z.6 F30000 G1 X27.328 Y57.969 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.547627 G1 F3000 G1 X27.358 Y58.27 E.01243 ;WIDTH:0.512674 G3 X27.389 Y58.601 I-4.91 J.632 E.01274 ;WIDTH:0.481735 G3 X27.386 Y59.415 I-6.025 J.382 E.02912 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X27.401 Y59.001 G1 X27.389 Y58.601 ;WIPE_END G1 X22.874 Y60.428 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.196452 G1 F3000 G1 X22.644 Y60.331 E.00312 ;WIDTH:0.167745 G1 X22.565 Y60.209 E.00148 ;WIDTH:0.146136 G1 X22.487 Y60.086 E.00123 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X22.565 Y60.209 ;WIPE_END G1 X14.933 Y60.194 Z.6 F30000 G1 X-43.087 Y60.085 Z.6 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.124522 G1 F3000 G1 X-43.165 Y60.208 E.00097 ;WIDTH:0.167726 G1 X-43.244 Y60.331 E.00148 ;WIDTH:0.19666 G1 X-43.474 Y60.428 E.00313 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-43.244 Y60.331 ;WIPE_END G1 X-46.126 Y60.428 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.196446 G1 F3000 G1 X-46.356 Y60.331 E.00312 ;WIDTH:0.167743 G1 X-46.435 Y60.209 E.00148 ;WIDTH:0.146135 G1 X-46.513 Y60.086 E.00123 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-46.435 Y60.209 ;WIPE_END G1 X-47.986 Y59.415 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.481736 G1 F3000 G3 X-47.989 Y58.601 I6.023 J-.432 E.02912 ;WIDTH:0.512672 G3 X-47.958 Y58.27 I4.941 J.301 E.01274 ;WIDTH:0.547627 G1 X-47.928 Y57.969 E.01243 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-47.958 Y58.27 ;WIPE_END G1 X-47.132 Y50.682 Z.6 F30000 G1 X-39.367 Y-20.655 Z.6 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.619155 G1 F3000 G3 X-39.368 Y-21.921 I9.512 J-.645 E.05949 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-39.389 Y-21.303 G1 X-39.367 Y-20.655 ;WIPE_END G1 X-39.367 Y-28.288 Z.6 F30000 G1 X-39.367 Y-38.655 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G3 X-39.368 Y-39.921 I9.512 J-.645 E.05949 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-39.389 Y-39.303 G1 X-39.367 Y-38.655 ;WIPE_END G1 X-37.82 Y-46.129 Z.6 F30000 G1 X-34.95 Y-60 Z.6 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.74292 G1 F3000 G1 X-27.65 Y-60 E.4164 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-29.65 Y-60 ;WIPE_END G1 X-22.018 Y-60 Z.6 F30000 G1 X7.05 Y-60 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X14.35 Y-60 E.4164 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X12.35 Y-60 ;WIPE_END G1 X19.96 Y-59.411 Z.6 F30000 G1 X30.706 Y-58.579 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Bottom surface ;WIDTH:0.501257 G1 F4800 G1 X29.985 Y-59.3 E.03808 G1 X29.337 Y-59.3 E.02421 G1 X30.5 Y-58.137 E.06145 G1 X30.5 Y-57.488 E.02421 G1 X28.688 Y-59.3 E.09569 G1 X28.04 Y-59.3 E.02421 G1 X30.5 Y-56.84 E.12993 M73 P4 R76 G1 X30.5 Y-56.192 E.02421 G1 X27.392 Y-59.3 E.16416 G1 X26.744 Y-59.3 E.02421 G1 X30.5 Y-55.544 E.1984 G1 X30.5 Y-54.896 E.02421 G1 X26.096 Y-59.3 E.23264 G1 X25.448 Y-59.3 E.02421 G1 X30.5 Y-54.248 E.26687 M73 P5 R76 G1 X30.5 Y-53.599 E.02421 G1 X24.799 Y-59.3 E.30111 G1 X24.151 Y-59.3 E.02421 G1 X30.5 Y-52.951 E.33535 G1 X30.5 Y-52.7 E.00939 G1 X30.103 Y-52.7 E.01482 G1 X23.503 Y-59.3 E.34862 G1 X22.855 Y-59.3 E.02421 G1 X29.455 Y-52.7 E.34862 G1 X28.807 Y-52.7 E.02421 G1 X22.207 Y-59.3 E.34862 G1 X21.558 Y-59.3 E.02421 G1 X28.159 Y-52.7 E.34862 G1 X27.51 Y-52.7 E.02421 G1 X20.91 Y-59.3 E.34862 G1 X20.262 Y-59.3 E.02421 G1 X26.862 Y-52.7 E.34862 G1 X26.214 Y-52.7 E.02421 G1 X19.614 Y-59.3 E.34862 G1 X18.966 Y-59.3 E.02421 G1 X25.566 Y-52.7 E.34862 G1 X24.918 Y-52.7 E.02421 G1 X18.317 Y-59.3 E.34862 G1 X17.669 Y-59.3 E.02421 G1 X24.27 Y-52.7 E.34862 G1 X23.621 Y-52.7 E.02421 G1 X17.021 Y-59.3 E.34862 G1 X16.373 Y-59.3 E.02421 G1 X22.973 Y-52.7 E.34862 G1 X22.325 Y-52.7 E.02421 G1 X15.725 Y-59.3 E.34862 G1 X15.4 Y-59.3 E.01213 G1 X15.4 Y-58.977 E.01208 G1 X21.677 Y-52.7 E.33154 G1 X21.029 Y-52.7 E.02421 G1 X15.4 Y-58.329 E.2973 G1 X15.4 Y-57.68 E.02421 G1 X20.38 Y-52.7 E.26307 G1 X19.732 Y-52.7 E.02421 G1 X15.4 Y-57.032 E.22883 G1 X15.4 Y-56.384 E.02421 G1 X19.084 Y-52.7 E.19459 G1 X18.5 Y-52.7 E.02181 G1 X18.5 Y-52.636 E.0024 G1 X15.4 Y-55.736 E.16375 G1 X15.4 Y-55.088 E.02421 G1 X18.5 Y-51.987 E.16375 G1 X18.5 Y-51.339 E.02421 G1 X15.4 Y-54.439 E.16375 G1 X15.4 Y-53.791 E.02421 G1 X18.5 Y-50.691 E.16375 G1 X18.5 Y-50.043 E.02421 G1 X15.4 Y-53.143 E.16375 G1 X15.4 Y-52.495 E.02421 G1 X18.5 Y-49.395 E.16375 G1 X18.5 Y-48.747 E.02421 G1 X14.947 Y-52.3 E.1877 G1 X14.298 Y-52.3 E.02421 G1 X18.5 Y-48.098 E.22193 G1 X18.5 Y-47.45 E.02421 G1 X13.65 Y-52.3 E.25617 G1 X13.002 Y-52.3 E.02421 G1 X18.5 Y-46.802 E.29041 G1 X18.5 Y-46.154 E.02421 G1 X12.354 Y-52.3 E.32464 G1 X11.706 Y-52.3 E.02421 G1 X18.5 Y-45.506 E.35888 G1 X18.5 Y-44.857 E.02421 G1 X11.057 Y-52.3 E.39312 G1 X10.409 Y-52.3 E.02421 G1 X18.5 Y-44.209 E.42735 G1 X18.5 Y-43.561 E.02421 G1 X9.761 Y-52.3 E.46159 G1 X9.113 Y-52.3 E.02421 G1 X18.5 Y-42.913 E.49583 G1 X18.5 Y-42.265 E.02421 G1 X8.465 Y-52.3 E.53006 G1 X7.816 Y-52.3 E.02421 G1 X18.5 Y-41.616 E.5643 G1 X18.5 Y-40.968 E.02421 G1 X6.963 Y-52.506 E.6094 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X8.377 Y-51.092 ;WIPE_END G1 X6.216 Y-58.412 Z.6 F30000 G1 X6.206 Y-58.448 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X5.354 Y-59.3 E.045 G1 X4.706 Y-59.3 E.02421 G1 X6 Y-58.006 E.06838 G1 X6 Y-57.357 E.02421 G1 X4.057 Y-59.3 E.10261 G1 X3.409 Y-59.3 E.02421 G1 X6 Y-56.709 E.13685 G1 X6 Y-56.061 E.02421 G1 X2.761 Y-59.3 E.17109 G1 X2.113 Y-59.3 E.02421 G1 X6 Y-55.413 E.20532 G1 X6 Y-54.765 E.02421 G1 X1.465 Y-59.3 E.23956 G1 X.816 Y-59.3 E.02421 G1 X6 Y-54.116 E.2738 G1 X6 Y-53.468 E.02421 G1 X.168 Y-59.3 E.30803 G1 X-.48 Y-59.3 E.02421 G1 X6 Y-52.82 E.34227 G1 X6 Y-52.3 E.01942 G1 X6.52 Y-52.3 E.01942 G1 X18.5 Y-40.32 E.63277 G1 X18.5 Y-39.672 E.02421 G1 X-1.128 Y-59.3 E1.03674 G1 X-1.776 Y-59.3 E.02421 G1 X18.5 Y-39.024 E1.07098 G1 X18.5 Y-38.376 E.02421 G1 X-2.424 Y-59.3 E1.10522 G1 X-3.073 Y-59.3 E.02421 G1 X18.5 Y-37.727 E1.13945 G1 X18.5 Y-37.079 E.02421 G1 X-3.721 Y-59.3 E1.17369 G1 X-4.369 Y-59.3 E.02421 G1 X18.5 Y-36.431 E1.20793 G1 X18.5 Y-35.783 E.02421 G1 X-5.017 Y-59.3 E1.24216 G1 X-5.665 Y-59.3 E.02421 G1 X18.5 Y-35.135 E1.2764 G1 X18.5 Y-34.486 E.02421 G1 X-6.314 Y-59.3 E1.31063 G1 X-6.962 Y-59.3 E.02421 G1 X18.5 Y-33.838 E1.34487 G1 X18.5 Y-33.19 E.02421 G1 X-7.61 Y-59.3 E1.37911 G1 X-8.258 Y-59.3 E.02421 G1 X18.5 Y-32.542 E1.41334 G1 X18.5 Y-31.894 E.02421 G1 X-8.906 Y-59.3 E1.44758 G1 X-9.555 Y-59.3 E.02421 G1 X18.5 Y-31.245 E1.48182 G1 X18.5 Y-30.597 E.02421 G1 X-10.203 Y-59.3 E1.51605 G1 X-10.851 Y-59.3 E.02421 G1 X18.5 Y-29.949 E1.55029 G1 X18.5 Y-29.301 E.02421 G1 X-11.499 Y-59.3 E1.58453 G1 X-12.147 Y-59.3 E.02421 G1 X18.5 Y-28.653 E1.61876 G1 X18.5 Y-28.005 E.02421 G1 X-12.795 Y-59.3 E1.653 G1 X-13.444 Y-59.3 E.02421 G1 X18.5 Y-27.356 E1.68724 G1 X18.5 Y-26.708 E.02421 G1 X-14.092 Y-59.3 E1.72147 G1 X-14.74 Y-59.3 E.02421 G1 X18.5 Y-26.06 E1.75571 G1 X18.5 Y-25.412 E.02421 G1 X-15.388 Y-59.3 E1.78995 G1 X-16.036 Y-59.3 E.02421 G1 X18.5 Y-24.764 E1.82418 G1 X18.5 Y-24.115 E.02421 G1 X-16.685 Y-59.3 E1.85842 G1 X-17.333 Y-59.3 E.02421 G1 X18.5 Y-23.467 E1.89266 G1 X18.5 Y-22.819 E.02421 G1 X-17.981 Y-59.3 E1.92689 G1 X-18.629 Y-59.3 E.02421 G1 X18.5 Y-22.171 E1.96113 G1 X18.5 Y-21.523 E.02421 G1 X-19.277 Y-59.3 E1.99537 G1 X-19.926 Y-59.3 E.02421 G1 X18.5 Y-20.874 E2.0296 G1 X18.5 Y-20.226 E.02421 G1 X-20.574 Y-59.3 E2.06384 G1 X-21.222 Y-59.3 E.02421 G1 X18.5 Y-19.578 E2.09808 G1 X18.5 Y-18.93 E.02421 G1 X-21.87 Y-59.3 E2.13231 G1 X-22.518 Y-59.3 E.02421 G1 X18.5 Y-18.282 E2.16655 G1 X18.5 Y-17.634 E.02421 G1 X-23.166 Y-59.3 E2.20079 G1 X-23.815 Y-59.3 E.02421 G1 X18.5 Y-16.985 E2.23502 G1 X18.5 Y-16.337 E.02421 G1 X-24.463 Y-59.3 E2.26926 G1 X-25.111 Y-59.3 E.02421 G1 X18.5 Y-15.689 E2.30349 G1 X18.5 Y-15.041 E.02421 G1 X-25.759 Y-59.3 E2.33773 G1 X-26.407 Y-59.3 E.02421 G1 X18.5 Y-14.393 E2.37197 G1 X18.5 Y-13.744 E.02421 G1 X-26.6 Y-58.845 E2.38215 G1 X-26.6 Y-58.196 E.02421 G1 X18.5 Y-13.096 E2.38215 G1 X18.5 Y-12.448 E.02421 G1 X-26.6 Y-57.548 E2.38215 G1 X-26.6 Y-56.9 E.02421 G1 X18.5 Y-11.8 E2.38215 G1 X18.5 Y-11.152 E.02421 G1 X-26.6 Y-56.252 E2.38215 G1 X-26.6 Y-55.604 E.02421 G1 X18.5 Y-10.504 E2.38215 G1 X18.5 Y-9.855 E.02421 M73 P6 R76 G1 X-26.6 Y-54.956 E2.38215 G1 X-26.6 Y-54.307 E.02421 G1 X18.5 Y-9.207 E2.38215 G1 X18.5 Y-8.559 E.02421 G1 X-26.6 Y-53.659 E2.38215 G1 X-26.6 Y-53.011 E.02421 G1 X18.5 Y-7.911 E2.38215 G1 X18.5 Y-7.263 E.02421 G1 X-26.6 Y-52.363 E2.38215 G1 X-26.6 Y-52.3 E.00234 G1 X-27.186 Y-52.3 E.02187 G1 X18.5 Y-6.614 E2.41307 G1 X18.5 Y-5.966 E.02421 G1 X-15.223 Y-39.689 E1.78121 G3 X-15.213 Y-39.031 I-2.493 J.365 E.02464 G1 X18.706 Y-5.112 E1.79157 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X17.292 Y-6.527 ;WIPE_END G1 X24.767 Y-4.985 Z.6 F30000 G1 X27.091 Y-4.506 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X27.501 Y-4.095 E.02168 G1 X27.501 Y-3.447 E.02422 G1 X26.648 Y-4.3 E.04507 G1 X26 Y-4.3 E.02421 G1 X26.655 Y-3.645 E.03459 G2 X25.985 Y-3.666 I-.458 J3.896 E.02504 G1 X25.352 Y-4.3 E.03347 G1 X24.704 Y-4.3 E.02421 G1 X25.414 Y-3.589 E.03755 G2 X24.915 Y-3.441 I.504 J2.611 E.0195 G1 X24.055 Y-4.3 E.0454 G1 X23.407 Y-4.3 E.02421 G1 X24.465 Y-3.242 E.05589 G2 X24.068 Y-2.991 I1.075 J2.143 E.01758 G1 X22.759 Y-4.3 E.06914 G1 X22.111 Y-4.3 E.02421 G1 X23.711 Y-2.7 E.0845 G2 X23.392 Y-2.371 I1.514 J1.781 E.01715 G1 X21.463 Y-4.3 E.10192 G1 X20.814 Y-4.3 E.02421 G1 X23.116 Y-1.998 E.12158 G2 X22.885 Y-1.581 I2.003 J1.381 E.01784 G1 X20.166 Y-4.3 E.14362 G1 X19.518 Y-4.3 E.02421 G1 X22.7 Y-1.118 E.16805 G2 X22.575 Y-.594 I4.11 J1.251 E.02013 G1 X-15.306 Y-38.476 E2.00088 G3 X-15.481 Y-38.003 I-1.83 J-.405 E.01891 M73 P6 R75 G1 X22.523 Y.001 E2.00734 G2 X22.595 Y.721 I5.364 J-.17 E.02703 G1 X-15.861 Y-37.734 E2.03118 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-14.447 Y-36.32 ;WIPE_END G1 X-17.638 Y-42.104 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-27.834 Y-52.3 E.53854 G1 X-28.482 Y-52.3 E.02421 G1 X-18.557 Y-42.375 E.52425 G2 X-19.113 Y-42.283 I.47 J4.564 E.02106 G1 X-29.13 Y-52.3 E.52911 G1 X-29.778 Y-52.3 E.02421 G1 X-19.585 Y-42.107 E.53838 G2 X-20.002 Y-41.875 I.701 J1.751 E.01785 G1 X-30.427 Y-52.3 E.55062 G1 X-31.075 Y-52.3 E.02421 G1 X-20.368 Y-41.593 E.56551 G2 X-20.686 Y-41.263 I1.056 J1.334 E.01717 G1 X-31.723 Y-52.3 E.58296 G1 X-32.371 Y-52.3 E.02421 G1 X-20.957 Y-40.886 E.60288 G2 X-21.175 Y-40.455 I5.444 J3.023 E.01802 G1 X-33.019 Y-52.3 E.62562 G1 X-33.667 Y-52.3 E.02421 G1 X-21.324 Y-39.957 E.65194 G2 X-21.397 Y-39.382 I2.148 J.565 E.02172 G1 X-34.316 Y-52.3 E.68233 G1 X-34.964 Y-52.3 E.02421 G1 X-21.046 Y-38.382 E.73515 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-22.46 Y-39.796 ;WIPE_END G1 X-16.7 Y-34.789 Z.6 F30000 G1 X27.153 Y3.335 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X27.5 Y3.682 E.01833 G1 X27.5 Y4.33 E.02421 G1 X26.794 Y3.625 E.03728 G3 X26.199 Y3.677 I-.761 J-5.247 E.02235 G1 X27.5 Y4.978 E.06875 G1 X27.5 Y5.627 E.02421 G1 X25.196 Y3.322 E.12171 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X26.61 Y4.737 ;WIPE_END G1 X27.706 Y6.481 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-15.995 Y-37.22 E2.30822 G3 X-16.324 Y-36.902 I-1.374 J-1.093 E.01717 G1 X27.5 Y6.923 E2.31477 G1 X27.5 Y7.571 E.02421 G1 X-16.702 Y-36.631 E2.33472 G3 X-17.133 Y-36.414 I-3.09 J-5.59 E.01803 G1 X27.5 Y8.219 E2.35748 G1 X27.5 Y8.868 E.02421 G1 X-17.631 Y-36.264 E2.38378 G3 X-18.206 Y-36.191 I-.565 J-2.149 E.02172 G1 X27.5 Y9.516 E2.41417 G1 X27.5 Y10.164 E.02421 G1 X-19.206 Y-36.542 E2.46698 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-17.792 Y-35.128 ;WIPE_END G1 X-22.392 Y-41.219 Z.6 F30000 G1 X-35.794 Y-58.964 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-36.13 Y-59.3 E.01775 G1 X-36.778 Y-59.3 E.02421 G1 X-36 Y-58.522 E.04112 G1 X-36 Y-57.873 E.02421 G1 X-37.427 Y-59.3 E.07535 G1 X-38.075 Y-59.3 E.02421 G1 X-36 Y-57.225 E.10959 G1 X-36 Y-56.577 E.02421 G1 X-38.723 Y-59.3 E.14383 G1 X-39.371 Y-59.3 E.02421 G1 X-36 Y-55.929 E.17806 G1 X-36 Y-55.281 E.02421 G1 X-40.019 Y-59.3 E.2123 G1 X-40.667 Y-59.3 E.02421 G1 X-36 Y-54.633 E.24654 G1 X-36 Y-53.984 E.02421 G1 X-41.316 Y-59.3 E.28077 G1 X-41.964 Y-59.3 E.02421 G1 X-35.794 Y-53.13 E.32587 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-37.208 Y-54.545 ;WIPE_END G1 X-42.818 Y-59.506 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X27.5 Y10.812 E3.71412 G1 X27.5 Y11.46 E.02421 G1 X-43.26 Y-59.3 E3.73749 G1 X-43.908 Y-59.3 E.02421 G1 X27.5 Y12.109 E3.77173 G1 X27.5 Y12.757 E.02421 G1 X-44.557 Y-59.3 E3.80597 G1 X-45.205 Y-59.3 E.02421 G1 X27.5 Y13.405 E3.8402 G1 X27.5 Y14.053 E.02421 G1 X-45.853 Y-59.3 E3.87444 G1 X-46.501 Y-59.3 E.02421 G1 X-39.901 Y-52.7 E.34862 G1 X-40.549 Y-52.7 E.02421 G1 X-47.149 Y-59.3 E.34862 G1 X-47.798 Y-59.3 E.02421 G1 X-41.197 Y-52.7 E.34862 G1 X-41.845 Y-52.7 E.02421 G1 X-48.446 Y-59.3 E.34862 G1 X-49.094 Y-59.3 E.02421 G1 X-42.494 Y-52.7 E.34862 G1 X-43.142 Y-52.7 E.02421 G1 X-49.742 Y-59.3 E.34862 G1 X-50.39 Y-59.3 E.02421 G1 X-43.79 Y-52.7 E.34862 G1 X-44.438 Y-52.7 E.02421 G1 X-51.038 Y-59.3 E.34862 G1 X-51.1 Y-59.3 E.0023 G1 X-51.1 Y-58.714 E.02191 G1 X-45.086 Y-52.7 E.31764 G1 X-45.735 Y-52.7 E.02421 G1 X-51.1 Y-58.065 E.2834 G1 X-51.1 Y-57.417 E.02421 G1 X-46.383 Y-52.7 E.24917 G1 X-47.031 Y-52.7 E.02421 G1 X-51.1 Y-56.769 E.21493 G1 X-51.1 Y-56.121 E.02421 G1 X-47.679 Y-52.7 E.18069 G1 X-48.327 Y-52.7 E.02421 G1 X-51.1 Y-55.473 E.14646 G1 X-51.1 Y-54.824 E.02421 G1 X-48.976 Y-52.7 E.11222 G1 X-49.624 Y-52.7 E.02421 G1 X-51.1 Y-54.176 E.07798 G1 X-51.1 Y-53.528 E.02421 G1 X-50.272 Y-52.7 E.04375 G1 X-50.92 Y-52.7 E.02421 G1 X-51.306 Y-53.086 E.02037 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-50.92 Y-52.7 G1 X-50.272 Y-52.7 G1 X-50.842 Y-53.27 ;WIPE_END G1 X-43.248 Y-52.503 Z.6 F30000 G1 X-39.306 Y-52.105 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X27.5 Y14.701 E3.52863 G1 X27.5 Y15.349 E.02421 G1 X-39.1 Y-51.251 E3.51776 G1 X-39.1 Y-50.603 E.02421 G1 X27.5 Y15.998 E3.51776 G1 X27.5 Y16.646 E.02421 G1 X9.2 Y-1.654 E.96659 G1 X9.2 Y-1.006 E.0242 G1 X27.5 Y17.3 E.96677 G1 X26.858 Y17.3 E.02398 G1 X9.2 Y-.358 E.93271 G1 X9.199 Y.289 E.0242 G1 X26.21 Y17.3 E.89849 G1 X25.562 Y17.3 E.02421 M73 P7 R75 G1 X12.615 Y4.354 E.68382 G2 X10.746 Y2.485 I-2.866 J.997 E.10213 G1 X9.199 Y.937 E.08173 G1 X9.199 Y1.585 E.0242 G1 X9.925 Y2.312 E.03836 G2 X9.29 Y2.325 I-.268 J2.457 E.0238 G1 X8.993 Y2.028 E.01568 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X9.29 Y2.325 G1 X9.687 Y2.297 G1 X9.925 Y2.312 G1 X9.258 Y1.644 ;WIPE_END G1 X12.557 Y4.944 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X24.914 Y17.3 E.65266 G1 X24.265 Y17.3 E.02421 G1 X12.776 Y5.811 E.60687 G3 X12.653 Y6.336 I-2.056 J-.205 E.0202 G1 X23.617 Y17.3 E.57913 G1 X22.969 Y17.3 E.02421 G1 X12.465 Y6.796 E.55483 G3 X12.221 Y7.201 I-1.66 J-.722 E.01769 G1 X22.321 Y17.3 E.53344 G1 X21.673 Y17.3 E.02421 G1 X11.929 Y7.556 E.51467 G1 X11.588 Y7.863 E.01714 G1 X21.5 Y17.776 E.52357 G1 X21.5 Y18.424 E.02421 G1 X11.193 Y8.117 E.54442 G3 X10.744 Y8.316 I-.981 J-1.605 E.0184 G1 X21.5 Y19.072 E.56813 G1 X21.5 Y19.72 E.02421 G1 X10.232 Y8.452 E.59519 G3 X9.63 Y8.499 I-.581 J-3.553 E.02255 G1 X21.5 Y20.369 E.62694 G1 X21.5 Y21.017 E.02421 G1 X9.2 Y8.716 E.6497 G1 X9.2 Y9.364 E.02421 G1 X21.5 Y21.665 E.6497 G1 X21.5 Y22.313 E.02421 G1 X9.2 Y10.013 E.6497 G1 X9.2 Y10.661 E.02421 G1 X21.5 Y22.961 E.64969 G1 X21.5 Y23.609 E.02421 G1 X9.2 Y11.309 E.64969 G1 X9.2 Y11.957 E.02421 G1 X21.5 Y24.258 E.64969 G1 X21.5 Y24.906 E.02421 G1 X9.2 Y12.606 E.64969 G1 X9.2 Y13.254 E.02421 G1 X21.5 Y25.554 E.64969 G1 X21.5 Y26.202 E.02421 G1 X9.2 Y13.902 E.64968 G1 X9.2 Y14.55 E.02421 G1 X21.5 Y26.85 E.64968 G1 X21.5 Y27.499 E.02421 G1 X8.701 Y14.7 E.67601 G1 X8.053 Y14.7 E.02421 G1 X21.5 Y28.147 E.71025 G1 X21.5 Y28.795 E.02421 G1 X7.405 Y14.7 E.74449 G1 X6.757 Y14.7 E.02421 G1 X21.5 Y29.443 E.77872 G1 X21.5 Y30.091 E.02421 G1 X6.109 Y14.7 E.81296 G1 X5.461 Y14.7 E.02421 G1 X21.5 Y30.739 E.8472 G1 X21.5 Y31.388 E.02421 G1 X4.812 Y14.7 E.88143 G1 X4.164 Y14.7 E.02421 G1 X21.706 Y32.242 E.92653 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X20.292 Y30.827 ;WIPE_END G1 X27.144 Y32.494 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X27.5 Y32.85 E.01882 G1 X27.5 Y33.499 E.02421 G1 X26.701 Y32.7 E.04219 G1 X26.053 Y32.7 E.02421 G1 X27.5 Y34.147 E.07642 G1 X27.5 Y34.795 E.02421 G1 X25.405 Y32.7 E.11066 G1 X24.757 Y32.7 E.02421 G1 X27.5 Y35.443 E.1449 G1 X27.5 Y36.091 E.02421 G1 X24.109 Y32.7 E.17913 G1 X23.461 Y32.7 E.02421 G1 X27.5 Y36.74 E.21337 G1 X27.5 Y37.3 E.02094 G1 X27.413 Y37.3 E.00327 G1 X22.812 Y32.7 E.24298 G1 X22.164 Y32.7 E.02421 G1 X26.764 Y37.3 E.24298 G1 X26.116 Y37.3 E.02421 G1 X3.516 Y14.7 E1.19372 G1 X2.868 Y14.7 E.02421 G1 X25.468 Y37.3 E1.19372 G1 X24.82 Y37.3 E.02421 G1 X2.22 Y14.7 E1.19372 G1 X1.571 Y14.7 E.02421 G1 X24.172 Y37.3 E1.19372 G1 X23.523 Y37.3 E.02421 G1 X.923 Y14.7 E1.19372 G1 X.275 Y14.7 E.02421 G1 X22.875 Y37.3 E1.19372 G1 X22.227 Y37.3 E.02421 G1 X-.373 Y14.7 E1.19372 G1 X-1.021 Y14.7 E.02421 G1 X21.579 Y37.3 E1.19372 G1 X21.5 Y37.3 E.00294 G1 X21.5 Y37.87 E.02127 G1 X-1.67 Y14.7 E1.2238 G1 X-2.318 Y14.7 E.02421 G1 X21.5 Y38.518 E1.25803 G1 X21.5 Y39.166 E.02421 G1 X-2.966 Y14.7 E1.29227 G1 X-3.614 Y14.7 E.02421 G1 X4.986 Y23.3 E.45426 G1 X5.4 Y23.3 E.01545 G1 X5.4 Y23.714 E.01545 G1 X21.5 Y39.814 E.8504 G1 X21.5 Y40.462 E.02421 M73 P7 R74 G1 X5.4 Y24.362 E.8504 G1 X5.4 Y25.01 E.02421 G1 X21.5 Y41.11 E.8504 G1 X21.5 Y41.759 E.02421 G1 X5.4 Y25.658 E.8504 G1 X5.4 Y26.307 E.02421 G1 X21.5 Y42.407 E.8504 G1 X21.5 Y43.055 E.02421 G1 X5.4 Y26.955 E.8504 G1 X5.4 Y27.603 E.02421 G1 X21.5 Y43.703 E.8504 G1 X21.5 Y44.351 E.02421 G1 X5.4 Y28.251 E.8504 G1 X5.4 Y28.899 E.02421 G1 X21.5 Y45 E.8504 G1 X21.5 Y45.648 E.02421 G1 X5.4 Y29.548 E.8504 G1 X5.4 Y30.196 E.02421 G1 X21.5 Y46.296 E.8504 G1 X21.5 Y46.944 E.02421 G1 X5.4 Y30.844 E.8504 G1 X5.4 Y31.492 E.02421 G1 X21.5 Y47.592 E.8504 G1 X21.5 Y48.241 E.02421 G1 X5.4 Y32.14 E.8504 G1 X5.4 Y32.788 E.02421 G1 X21.5 Y48.889 E.8504 G1 X21.5 Y49.537 E.02421 G1 X5.4 Y33.437 E.8504 G1 X5.4 Y34.085 E.02421 G1 X21.5 Y50.185 E.8504 G1 X21.5 Y50.833 E.02421 G1 X5.367 Y34.7 E.85215 G1 X4.719 Y34.7 E.02421 G1 X21.706 Y51.687 E.89725 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X20.292 Y50.273 ;WIPE_END G1 X27.407 Y53.034 Z.6 F30000 G1 X27.706 Y53.15 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X27.256 Y52.7 E.02377 G1 X26.608 Y52.7 E.02421 G1 X27.5 Y53.592 E.04714 G1 X27.5 Y54.241 E.02421 G1 X25.959 Y52.7 E.08138 G1 X25.311 Y52.7 E.02421 G1 X27.5 Y54.889 E.11561 G1 X27.5 Y55.537 E.02421 G1 X24.663 Y52.7 E.14985 G1 X24.015 Y52.7 E.02421 G1 X27.5 Y56.185 E.18409 G1 X27.5 Y56.833 E.02421 G1 X23.367 Y52.7 E.21832 G1 X22.719 Y52.7 E.02421 G1 X27.5 Y57.481 E.25256 G1 X27.5 Y57.608 E.00471 G1 X27.025 Y57.654 E.01785 G1 X22.07 Y52.7 E.26168 G1 X21.5 Y52.7 E.0213 G1 X21.5 Y52.13 E.0213 G1 X4.07 Y34.7 E.92062 G1 X3.422 Y34.7 E.02421 G1 X24.655 Y55.933 E1.12151 G1 X24.602 Y55.922 E.00205 G2 X23.985 Y55.911 I-.355 J2.416 E.02311 G1 X2.774 Y34.7 E1.12033 G1 X2.126 Y34.7 E.02421 G1 X4.726 Y37.3 E.13734 G1 X4.078 Y37.3 E.02421 G1 X1.478 Y34.7 E.13734 G1 X.829 Y34.7 E.02421 G1 X3.43 Y37.3 E.13734 G1 X2.781 Y37.3 E.02421 G1 X.181 Y34.7 E.13734 G1 X-.467 Y34.7 E.02421 G1 X2.133 Y37.3 E.13734 G1 X1.485 Y37.3 E.02421 G1 X-1.115 Y34.7 E.13734 G1 X-1.763 Y34.7 E.02421 G1 X.837 Y37.3 E.13734 G1 X.189 Y37.3 E.02421 G1 X-2.411 Y34.7 E.13734 G1 X-3.06 Y34.7 E.02421 G1 X-.459 Y37.3 E.13734 G1 X-1.108 Y37.3 E.02421 G1 X-3.708 Y34.7 E.13734 G1 X-4.356 Y34.7 E.02421 G1 X-1.756 Y37.3 E.13734 G1 X-2.404 Y37.3 E.02421 G1 X-5.004 Y34.7 E.13734 G1 X-5.652 Y34.7 E.02421 G1 X-3.052 Y37.3 E.13734 G1 X-3.7 Y37.3 E.02421 G1 X-6.301 Y34.7 E.13734 G1 X-6.949 Y34.7 E.02421 G1 X-4.349 Y37.3 E.13734 G1 X-4.997 Y37.3 E.02421 G1 X-7.597 Y34.7 E.13734 G1 X-8.245 Y34.7 E.02421 G1 X-5.645 Y37.3 E.13734 G1 X-6.293 Y37.3 E.02421 G1 X-8.893 Y34.7 E.13734 G1 X-9.542 Y34.7 E.02421 G1 X-6.941 Y37.3 E.13734 G1 X-7.589 Y37.3 E.02421 G1 X-10.19 Y34.7 E.13734 G1 X-10.838 Y34.7 E.02421 G1 X-8.238 Y37.3 E.13734 G1 X-8.886 Y37.3 E.02421 G1 X-11.486 Y34.7 E.13734 G1 X-12.134 Y34.7 E.02421 G1 X-9.534 Y37.3 E.13734 G1 X-10.182 Y37.3 E.02421 G1 X-12.782 Y34.7 E.13734 G1 X-13.431 Y34.7 E.02421 G1 X-10.83 Y37.3 E.13734 G1 X-11.479 Y37.3 E.02421 G1 X-14.079 Y34.7 E.13734 G1 X-14.727 Y34.7 E.02421 G1 X-12.127 Y37.3 E.13734 G1 X-12.775 Y37.3 E.02421 G1 X-15.375 Y34.7 E.13734 G1 X-16.023 Y34.7 E.02421 G1 X-13.423 Y37.3 E.13734 G1 X-14.071 Y37.3 E.02421 G1 X-16.672 Y34.7 E.13734 G1 X-17.32 Y34.7 E.02421 G1 X-14.72 Y37.3 E.13734 G1 X-15.368 Y37.3 E.02421 G1 X-17.968 Y34.7 E.13734 G1 X-18.616 Y34.7 E.02421 G1 X-16.016 Y37.3 E.13734 G1 X-16.664 Y37.3 E.02421 G1 X-19.264 Y34.7 E.13734 G1 X-19.913 Y34.7 E.02421 G1 X-17.312 Y37.3 E.13734 G1 X-17.96 Y37.3 E.02421 G1 X-20.561 Y34.7 E.13734 G1 X-21.209 Y34.7 E.02421 G1 X-18.609 Y37.3 E.13734 G1 X-19.257 Y37.3 E.02421 G1 X-21.857 Y34.7 E.13734 G1 X-22.505 Y34.7 E.02421 G1 X-19.905 Y37.3 E.13734 G1 X-20.553 Y37.3 E.02421 G1 X-23.153 Y34.7 E.13734 G1 X-23.802 Y34.7 E.02421 G1 X-21.201 Y37.3 E.13734 G1 X-21.85 Y37.3 E.02421 G1 X-24.45 Y34.7 E.13734 G1 X-25.098 Y34.7 E.02421 G1 X-22.292 Y37.506 E.14821 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-23.706 Y36.092 ;WIPE_END G1 X-16.087 Y36.534 Z.6 F30000 G1 X5.194 Y37.768 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X23.423 Y55.997 E.96282 G1 X23.397 Y56.002 E.001 G2 X22.944 Y56.166 I.397 J1.8 E.01803 G1 X5.4 Y38.622 E.92667 G1 X5.4 Y39.27 E.02421 G1 X22.525 Y56.395 E.9045 G2 X22.155 Y56.674 I.875 J1.541 E.01733 G1 X5.4 Y39.919 E.88501 G1 X5.4 Y40.567 E.02421 G1 X21.834 Y57.001 E.86804 G2 X21.561 Y57.376 I1.287 J1.226 E.01738 G1 X5.4 Y41.215 E.8536 G1 X5.4 Y41.863 E.02421 G1 X21.333 Y57.813 E.842 G2 X21.183 Y58.294 I1.741 J.805 E.01889 G1 X5.4 Y42.511 E.83364 G1 X5.4 Y43.159 E.02421 G1 X21.107 Y58.866 E.82961 G2 X21.121 Y59.304 I1.559 J.169 E.0164 G1 X20.896 Y59.304 E.00839 G1 X5.4 Y43.808 E.81848 G1 X5.4 Y44.456 E.02421 G1 X20.248 Y59.304 E.78425 G1 X19.599 Y59.304 E.02421 G1 X5.4 Y45.104 E.75001 G1 X5.4 Y45.752 E.02421 G1 X18.951 Y59.304 E.71577 G1 X18.303 Y59.304 E.02421 M73 P8 R74 G1 X5.4 Y46.4 E.68153 G1 X5.4 Y47.049 E.02421 G1 X17.655 Y59.304 E.6473 G1 X17.007 Y59.304 E.02421 G1 X5.4 Y47.697 E.61306 G1 X5.4 Y48.345 E.02421 G1 X16.359 Y59.304 E.57882 G1 X15.71 Y59.304 E.02421 G1 X5.107 Y48.7 E.56008 G1 X4.458 Y48.7 E.02421 G1 X15.062 Y59.304 E.56008 G1 X14.414 Y59.304 E.02421 G1 X3.81 Y48.7 E.56007 G1 X3.162 Y48.7 E.02421 G1 X13.766 Y59.304 E.56007 G1 X13.118 Y59.304 E.02421 G1 X2.514 Y48.7 E.56007 G1 X1.866 Y48.7 E.02421 G1 X12.469 Y59.304 E.56007 G1 X11.821 Y59.304 E.02421 G1 X1.218 Y48.7 E.56007 G1 X.569 Y48.7 E.02421 G1 X11.173 Y59.304 E.56007 G1 X10.525 Y59.304 E.02421 G1 X-.079 Y48.7 E.56007 G1 X-.727 Y48.7 E.02421 G1 X9.877 Y59.304 E.56007 G1 X9.228 Y59.303 E.02421 G1 X-1.375 Y48.7 E.56007 G1 X-2.023 Y48.7 E.02421 G1 X8.58 Y59.303 E.56007 G1 X7.932 Y59.303 E.02421 G1 X-2.672 Y48.7 E.56007 G1 X-3.32 Y48.7 E.02421 G1 X7.284 Y59.303 E.56007 G1 X6.636 Y59.303 E.02421 G1 X-3.968 Y48.7 E.56007 G1 X-4.616 Y48.7 E.02421 G1 X5.987 Y59.303 E.56007 G1 X5.339 Y59.303 E.02421 G1 X-5.264 Y48.7 E.56007 G1 X-5.913 Y48.7 E.02421 G1 X4.691 Y59.303 E.56007 G1 X4.043 Y59.303 E.02421 G1 X-6.561 Y48.7 E.56007 G1 X-7.209 Y48.7 E.02421 G1 X3.395 Y59.303 E.56007 G1 X2.746 Y59.303 E.02421 G1 X-7.857 Y48.7 E.56007 G1 X-8.505 Y48.7 E.02421 G1 X2.098 Y59.303 E.56007 G1 X1.45 Y59.303 E.02421 G1 X-9.153 Y48.7 E.56007 G1 X-9.802 Y48.7 E.02421 G1 X.802 Y59.303 E.56007 G1 X.154 Y59.303 E.02421 G1 X-10.45 Y48.7 E.56007 G1 X-11.098 Y48.7 E.02421 G1 X-.495 Y59.303 E.56007 G1 X-1.143 Y59.303 E.02421 G1 X-11.746 Y48.7 E.56007 G1 X-12.394 Y48.7 E.02421 G1 X-1.791 Y59.303 E.56007 G1 X-2.439 Y59.303 E.02421 G1 X-13.043 Y48.7 E.56007 G1 X-13.691 Y48.7 E.02421 G1 X-3.087 Y59.303 E.56007 G1 X-3.735 Y59.303 E.02421 G1 X-14.339 Y48.7 E.56007 G1 X-14.987 Y48.7 E.02421 G1 X-4.384 Y59.303 E.56006 G1 X-5.032 Y59.303 E.02421 G1 X-15.635 Y48.7 E.56006 G1 X-16.284 Y48.7 E.02421 G1 X-5.68 Y59.303 E.56006 G1 X-6.328 Y59.303 E.02421 G1 X-16.932 Y48.7 E.56006 G1 X-17.58 Y48.7 E.02421 G1 X-6.976 Y59.303 E.56006 G1 X-7.625 Y59.303 E.02421 G1 X-18.228 Y48.7 E.56006 G1 X-18.876 Y48.7 E.02421 G1 X-8.273 Y59.303 E.56006 G1 X-8.921 Y59.303 E.02421 G1 X-19.524 Y48.7 E.56006 G1 X-20.173 Y48.7 E.02421 G1 X-9.569 Y59.303 E.56006 G1 X-10.217 Y59.303 E.02421 G1 X-20.821 Y48.7 E.56006 G1 X-21.469 Y48.7 E.02421 G1 X-10.866 Y59.303 E.56006 G1 X-11.514 Y59.303 E.02421 G1 X-22.117 Y48.7 E.56006 G1 X-22.765 Y48.7 E.02421 G1 X-12.162 Y59.303 E.56006 G1 X-12.81 Y59.303 E.02421 G1 X-23.414 Y48.7 E.56006 G1 X-24.062 Y48.7 E.02421 G1 X-13.458 Y59.303 E.56006 G1 X-14.107 Y59.303 E.02421 G1 X-24.916 Y48.494 E.57092 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-23.501 Y49.908 ;WIPE_END G1 X-17.944 Y44.677 Z.6 F30000 G1 X4.544 Y23.506 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-4.468 Y14.494 E.47598 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-3.054 Y15.908 ;WIPE_END G1 X.969 Y9.422 Z.6 F30000 G1 X8.36 Y-2.494 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-39.1 Y-49.955 E2.50681 G1 X-39.1 Y-49.306 E.02421 G1 X7.506 Y-2.7 E2.46171 G1 X6.858 Y-2.7 E.02421 G1 X-39.1 Y-48.658 E2.42747 G1 X-39.1 Y-48.01 E.02421 G1 X6.21 Y-2.7 E2.39323 G1 X5.562 Y-2.7 E.02421 G1 X-39.1 Y-47.362 E2.359 G1 X-39.1 Y-46.714 E.02421 G1 X4.914 Y-2.7 E2.32476 G1 X4.265 Y-2.7 E.02421 G1 X-15.393 Y-22.358 E1.03833 G2 X-17.23 Y-24.195 I-2.865 J1.028 E.10026 G1 X-32.997 Y-39.962 E.83278 G3 X-32.925 Y-39.242 I-3.931 J.758 E.02708 G1 X-18.058 Y-24.376 E.78521 G2 X-18.697 Y-24.366 I-.28 J2.51 E.0239 G1 X-32.988 Y-38.657 E.75486 G3 X-33.127 Y-38.148 I-2.004 J-.272 E.01978 G1 X-19.224 Y-24.245 E.73433 G2 X-19.685 Y-24.058 I.48 J1.846 E.01864 G1 X-33.325 Y-37.698 E.72045 G3 X-33.575 Y-37.299 I-1.64 J-.747 E.01762 G1 X-20.091 Y-23.816 E.71217 G2 X-20.448 Y-23.524 I.931 J1.499 E.01725 G1 X-33.87 Y-36.946 E.70895 G3 X-34.209 Y-36.637 I-1.342 J-1.135 E.01719 G1 X-20.762 Y-23.177 E.71061 G2 X-21.012 Y-22.791 I1.341 J1.14 E.01721 G1 X-34.594 Y-36.374 E.71739 G1 X-35.028 Y-36.16 E.01808 G1 X-21.212 Y-22.344 E.72975 G2 X-21.349 Y-21.833 I1.937 J.794 E.01981 G1 X-35.522 Y-36.005 E.74859 G3 X-36.088 Y-35.923 I-.595 J-2.109 E.02143 G1 X-21.179 Y-21.015 E.78746 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-22.594 Y-22.429 ;WIPE_END G1 X-15.447 Y-21.764 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X3.617 Y-2.7 E1.00694 G1 X2.969 Y-2.7 E.02421 G1 X-15.223 Y-20.883 E.96065 G3 X-15.343 Y-20.364 I-2.031 J-.197 E.01995 M73 P8 R73 G1 X2.321 Y-2.7 E.933 G1 X1.673 Y-2.7 E.02421 G1 X-15.53 Y-19.903 E.90864 G3 X-15.772 Y-19.497 I-1.663 J-.717 E.01771 G1 X1.024 Y-2.7 E.88719 G1 X.376 Y-2.7 E.02421 G1 X-16.064 Y-19.14 E.86837 G3 X-16.404 Y-18.832 I-1.304 J-1.095 E.01719 G1 X-.272 Y-2.7 E.85208 G1 X-.92 Y-2.7 E.02421 G1 X-16.797 Y-18.577 E.83862 G3 X-17.244 Y-18.376 I-.964 J-1.543 E.01836 G1 X-1.568 Y-2.7 E.828 G1 X-2.216 Y-2.7 E.02421 G1 X-17.755 Y-18.239 E.82075 G3 X-18.353 Y-18.188 I-.612 J-3.657 E.02242 G1 X-2.865 Y-2.7 E.81807 G1 X-3.513 Y-2.7 E.02421 G1 X-19.103 Y-18.29 E.82347 G3 X-21.298 Y-20.485 I.839 J-3.034 E.12121 G1 X-36.754 Y-35.941 E.81638 G3 X-37.662 Y-36.201 I.621 J-3.89 E.03535 G1 X-4.161 Y-2.7 E1.76948 G1 X-4.809 Y-2.7 E.02421 G1 X-39.1 Y-36.991 E1.81121 G1 X-39.1 Y-36.343 E.02421 G1 X-5 Y-2.242 E1.80114 G1 X-5 Y-1.594 E.02421 G1 X-39.1 Y-35.694 E1.80114 G1 X-39.1 Y-35.046 E.02421 G1 X-5 Y-.946 E1.80114 G1 X-5 Y-.298 E.02421 G1 X-39.1 Y-34.398 E1.80114 G1 X-39.1 Y-33.75 E.02421 G1 X-5 Y.35 E1.80114 G1 X-5 Y.999 E.02421 G1 X-39.1 Y-33.102 E1.80114 G1 X-39.1 Y-32.454 E.02421 G1 X-5 Y1.647 E1.80114 G1 X-5 Y2.295 E.02421 G1 X-39.1 Y-31.805 E1.80114 G1 X-39.1 Y-31.157 E.02421 G1 X-5 Y2.943 E1.80114 G1 X-5 Y3.591 E.02421 G1 X-39.1 Y-30.509 E1.80114 G1 X-39.1 Y-29.861 E.02421 G1 X-5 Y4.239 E1.80114 G1 X-5 Y4.888 E.02421 G1 X-39.1 Y-29.213 E1.80114 G1 X-39.1 Y-28.564 E.02421 M73 P9 R73 G1 X-34.885 Y-24.349 E.22264 G3 X-33.239 Y-22.703 I-1.335 J2.981 E.08889 G1 X-5 Y5.536 E1.49156 G1 X-5 Y6.184 E.02421 G1 X-32.96 Y-21.776 E1.47681 G1 X-32.95 Y-21.729 E.00178 G3 X-32.934 Y-21.102 I-2.374 J.377 E.02351 G1 X-5 Y6.832 E1.47544 G1 X-5 Y7.48 E.02421 G1 X-33.013 Y-20.533 E1.47962 G3 X-33.165 Y-20.036 I-1.961 J-.328 E.01944 G1 X-5 Y8.129 E1.48764 G1 X-5 Y8.777 E.02421 G1 X-15.6 Y-1.823 E.55989 G1 X-15.6 Y-1.175 E.02421 G1 X-5 Y9.425 E.55989 G1 X-5 Y10.073 E.02421 G1 X-15.6 Y-.527 E.55989 G1 X-15.6 Y.121 E.02421 G1 X-5 Y10.721 E.55989 G1 X-5 Y11.37 E.02421 G1 X-15.6 Y.769 E.55989 G1 X-15.6 Y1.417 E.02421 G1 X-5 Y12.018 E.55989 G1 X-5 Y12.666 E.02421 G1 X-15.6 Y2.066 E.55989 G1 X-15.6 Y2.714 E.02421 G1 X-5 Y13.314 E.55989 G1 X-5 Y13.962 E.02421 G1 X-15.6 Y3.362 E.55989 G1 X-15.6 Y4.01 E.02421 G1 X3.69 Y23.3 E1.01887 G1 X3.042 Y23.3 E.02421 G1 X-15.6 Y4.658 E.98464 G1 X-15.6 Y5.307 E.02421 G1 X2.393 Y23.3 E.9504 G1 X1.745 Y23.3 E.02421 G1 X-15.6 Y5.955 E.91616 G1 X-15.6 Y6.603 E.02421 G1 X1.097 Y23.3 E.88193 G1 X.449 Y23.3 E.02421 G1 X-15.6 Y7.251 E.84769 G1 X-15.6 Y7.899 E.02421 G1 X-.199 Y23.3 E.81345 G1 X-.848 Y23.3 E.02421 G1 X-15.6 Y8.548 E.77922 G1 X-15.6 Y9.196 E.02421 G1 X-1.496 Y23.3 E.74498 G1 X-2.144 Y23.3 E.02421 G1 X-15.6 Y9.844 E.71074 G1 X-15.6 Y10.492 E.02421 G1 X-2.792 Y23.3 E.67651 G1 X-3.44 Y23.3 E.02421 G1 X-15.6 Y11.14 E.64227 G1 X-15.6 Y11.788 E.02421 G1 X-4.088 Y23.3 E.60803 G1 X-4.737 Y23.3 E.02421 G1 X-15.6 Y12.437 E.5738 G1 X-15.6 Y13.085 E.02421 G1 X-5.385 Y23.3 E.53956 G1 X-6.033 Y23.3 E.02421 G1 X-15.6 Y13.733 E.50532 G1 X-15.6 Y14.381 E.02421 G1 X-6.681 Y23.3 E.47109 G1 X-7.329 Y23.3 E.02421 G1 X-15.93 Y14.7 E.45426 G1 X-16.578 Y14.7 E.02421 G1 X-7.978 Y23.3 E.45426 G1 X-8.626 Y23.3 E.02421 G1 X-17.226 Y14.7 E.45426 G1 X-17.874 Y14.7 E.02421 G1 X-9.274 Y23.3 E.45426 G1 X-9.922 Y23.3 E.02421 G1 X-18.522 Y14.7 E.45426 G1 X-19.171 Y14.7 E.02421 G1 X-10.57 Y23.3 E.45426 G1 X-11.219 Y23.3 E.02421 G1 X-19.819 Y14.7 E.45426 G1 X-20.467 Y14.7 E.02421 G1 X-11.867 Y23.3 E.45426 G1 X-12.515 Y23.3 E.02421 G1 X-21.115 Y14.7 E.45426 G1 X-21.763 Y14.7 E.02421 G1 X-13.163 Y23.3 E.45426 G1 X-13.811 Y23.3 E.02421 G1 X-22.411 Y14.7 E.45426 G1 X-23.06 Y14.7 E.02421 G1 X-14.459 Y23.3 E.45426 G1 X-15.108 Y23.3 E.02421 G1 X-23.708 Y14.7 E.45426 G1 X-24.356 Y14.7 E.02421 G1 X-15.756 Y23.3 E.45426 G1 X-16.404 Y23.3 E.02421 G1 X-25.004 Y14.7 E.45426 G1 X-25.652 Y14.7 E.02421 G1 X-17.052 Y23.3 E.45426 G1 X-17.7 Y23.3 E.02421 G1 X-26.301 Y14.7 E.45426 G1 X-26.949 Y14.7 E.02421 G1 X-18.349 Y23.3 E.45426 G1 X-18.997 Y23.3 E.02421 G1 X-27.597 Y14.7 E.45426 G1 X-28.245 Y14.7 E.02421 G1 X-19.645 Y23.3 E.45426 G1 X-20.293 Y23.3 E.02421 G1 X-29.099 Y14.494 E.46512 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-27.685 Y15.908 ;WIPE_END G1 X-29.594 Y8.814 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-29.93 Y8.478 E.01773 G3 X-30.57 Y8.486 I-.348 J-2.389 E.024 G1 X-29.594 Y9.462 E.05156 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-30.57 Y8.486 G1 X-30.297 Y8.503 G1 X-29.952 Y8.48 ;WIPE_END G1 X-23.998 Y3.704 Z.6 F30000 G1 X-16.271 Y-2.494 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-33.375 Y-19.598 E.90341 G1 X-33.637 Y-19.212 E.01743 G1 X-17.125 Y-2.7 E.87215 G1 X-17.773 Y-2.7 E.02421 G1 X-33.944 Y-18.871 E.85412 G3 X-34.295 Y-18.573 I-1.304 J-1.185 E.01723 G1 X-18.421 Y-2.7 E.83842 G1 X-19.069 Y-2.7 E.02421 G1 X-34.693 Y-18.323 E.82522 G3 X-35.139 Y-18.122 I-.954 J-1.518 E.01836 G1 X-19.717 Y-2.7 E.81457 G1 X-20.366 Y-2.7 E.02421 G1 X-35.647 Y-17.981 E.80712 G3 X-36.228 Y-17.914 I-.543 J-2.176 E.02193 G1 X-21.014 Y-2.7 E.80361 G1 X-21.662 Y-2.7 E.02421 G1 X-36.94 Y-17.978 E.80698 G3 X-37.956 Y-18.346 I.707 J-3.541 E.04051 G1 X-22.31 Y-2.7 E.82641 G1 X-22.958 Y-2.7 E.02421 G1 X-39.1 Y-18.842 E.85259 G1 X-39.1 Y-18.193 E.02421 G1 X-23.607 Y-2.7 E.81835 G1 X-24.255 Y-2.7 E.02421 G1 X-39.1 Y-17.545 E.78412 G1 X-39.1 Y-16.897 E.02421 G1 X-24.903 Y-2.7 E.74988 G1 X-25.551 Y-2.7 E.02421 G1 X-39.1 Y-16.249 E.71564 G1 X-39.1 Y-15.601 E.02421 G1 X-26.199 Y-2.7 E.68141 G1 X-26.848 Y-2.7 E.02421 G1 X-39.1 Y-14.952 E.64717 G1 X-39.1 Y-14.304 E.02421 G1 X-27.496 Y-2.7 E.61293 G1 X-28.144 Y-2.7 E.02421 G1 X-39.1 Y-13.656 E.5787 G1 X-39.1 Y-13.008 E.02421 G1 X-28.792 Y-2.7 E.54446 G1 X-29.44 Y-2.7 E.02421 G1 X-39.1 Y-12.36 E.51022 G1 X-39.1 Y-11.712 E.02421 G1 X-29.8 Y-2.411 E.49123 G1 X-29.8 Y-1.763 E.02421 G1 X-39.1 Y-11.063 E.49123 G1 X-39.1 Y-10.415 E.02421 G1 X-29.8 Y-1.115 E.49124 G1 X-29.8 Y-.466 E.02421 G1 X-39.1 Y-9.767 E.49125 G1 X-39.1 Y-9.119 E.02421 G1 X-29.799 Y.182 E.49125 G1 X-29.799 Y.83 E.02421 G1 X-39.1 Y-8.471 E.49126 G1 X-39.1 Y-7.822 E.02421 G1 X-29.799 Y1.478 E.49126 G1 X-29.799 Y2.127 E.02421 G1 X-39.1 Y-7.174 E.49127 G1 X-39.1 Y-6.526 E.02421 G1 X-30.275 Y2.299 E.46614 G2 X-30.867 Y2.355 I.064 J3.839 E.02224 G1 X-39.1 Y-5.878 E.43487 G1 X-39.1 Y-5.23 E.02421 G1 X-31.376 Y2.495 E.40799 G2 X-31.821 Y2.698 I.525 J1.737 E.01832 G1 X-39.1 Y-4.581 E.3845 G1 X-39.1 Y-4.3 E.01051 G1 X-39.467 Y-4.3 E.0137 G1 X-32.21 Y2.956 E.38328 G2 X-32.548 Y3.267 I1.01 J1.438 E.01718 G1 X-40.115 Y-4.3 E.39967 G1 X-40.763 Y-4.3 E.02421 G1 X-32.838 Y3.625 E.41858 G2 X-33.079 Y4.033 I1.429 J1.117 E.01773 G1 X-41.411 Y-4.3 E.44013 G1 X-42.06 Y-4.3 E.02421 G1 X-33.264 Y4.496 E.4646 G2 X-33.379 Y5.029 I4.123 J1.174 E.02037 G1 X-42.708 Y-4.3 E.49273 G1 X-43.356 Y-4.3 E.02421 G1 X-33.147 Y5.909 E.53926 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-34.561 Y4.495 ;WIPE_END G1 X-29.594 Y10.11 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-31.41 Y8.294 E.09595 G3 X-33.193 Y6.511 I1.079 J-2.862 E.09707 G1 X-44.004 Y-4.3 E.57102 G1 X-44.652 Y-4.3 E.02421 G1 X-29.8 Y10.553 E.78451 G1 X-29.8 Y11.201 E.02421 G1 X-45.301 Y-4.3 E.81874 G1 X-45.949 Y-4.3 E.02421 G1 X-29.8 Y11.849 E.85297 G1 X-29.8 Y12.497 E.02421 G1 X-43.254 Y-.957 E.71062 G3 X-43.132 Y-.187 I-3.597 J.962 E.02915 G1 X-29.8 Y13.145 E.7042 G1 X-29.8 Y13.793 E.02421 G1 X-43.153 Y.441 E.70528 G3 X-43.26 Y.982 I-2.801 J-.274 E.02063 G1 X-20.941 Y23.3 E1.17885 G1 X-21.589 Y23.3 E.02421 G1 X-43.429 Y1.461 E1.15351 G3 X-43.65 Y1.888 I-2.277 J-.911 E.01799 G1 X-22.238 Y23.3 E1.13097 G1 X-22.886 Y23.3 E.02421 G1 X-43.913 Y2.273 E1.11065 G3 X-44.218 Y2.616 I-4.414 J-3.608 E.01715 G1 X-23.534 Y23.3 E1.0925 G1 X-24.182 Y23.3 E.02421 G1 X-44.567 Y2.916 E1.07668 G3 X-44.955 Y3.176 I-1.514 J-1.841 E.01748 M73 P9 R72 G1 X-24.83 Y23.3 E1.06295 G1 X-25.479 Y23.3 E.02421 G1 X-45.385 Y3.393 E1.05145 G3 X-45.873 Y3.554 I-1.911 J-4.99 E.01919 G1 X-26 Y23.427 E1.04969 G1 X-26 Y24.075 E.02421 G1 X-46.419 Y3.656 E1.07851 G3 X-47.059 Y3.664 I-.379 J-4.69 E.02393 G1 X-26 Y24.723 E1.11233 G1 X-26 Y25.372 E.02421 G1 X-47.848 Y3.523 E1.154 G3 X-48.1 Y3.435 I.322 J-1.324 E.00999 G1 X-48.1 Y3.919 E.01808 G1 X-26 Y26.02 E1.16732 G1 X-26 Y26.668 E.02421 M73 P10 R72 G1 X-48.1 Y4.568 E1.16732 G1 X-48.1 Y5.216 E.02421 G1 X-26 Y27.316 E1.16732 G1 X-26 Y27.964 E.02421 G1 X-48.1 Y5.864 E1.16732 G1 X-48.1 Y6.512 E.02421 G1 X-26 Y28.613 E1.16732 G1 X-26 Y29.261 E.02421 G1 X-48.1 Y7.16 E1.16732 G1 X-48.1 Y7.809 E.02421 G1 X-26 Y29.909 E1.16732 G1 X-26 Y30.557 E.02421 G1 X-48.1 Y8.457 E1.16732 G1 X-48.1 Y9.105 E.02421 G1 X-26 Y31.205 E1.16732 G1 X-26 Y31.853 E.02421 G1 X-48.1 Y9.753 E1.16732 G1 X-48.1 Y10.401 E.02421 G1 X-26 Y32.502 E1.16732 G1 X-26 Y33.15 E.02421 G1 X-48.1 Y11.049 E1.16732 G1 X-48.1 Y11.698 E.02421 G1 X-25.794 Y34.004 E1.17818 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-27.208 Y32.59 ;WIPE_END G1 X-22.94 Y37.506 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-42.1 Y18.346 E1.012 G1 X-42.1 Y18.994 E.02421 G1 X-23.794 Y37.3 E.9669 G1 X-24.442 Y37.3 E.02421 G1 X-42.1 Y19.642 E.93267 G1 X-42.1 Y20.291 E.02421 G1 X-25.091 Y37.3 E.89843 G1 X-25.739 Y37.3 E.02421 G1 X-42.1 Y20.939 E.86419 G1 X-42.1 Y21.587 E.02421 G1 X-26 Y37.687 E.8504 G1 X-26 Y38.335 E.02421 G1 X-42.1 Y22.235 E.8504 G1 X-42.1 Y22.883 E.02421 G1 X-26 Y38.984 E.8504 G1 X-26 Y39.632 E.02421 G1 X-42.1 Y23.531 E.8504 G1 X-42.1 Y24.18 E.02421 G1 X-26 Y40.28 E.8504 G1 X-26 Y40.928 E.02421 G1 X-42.1 Y24.828 E.8504 G1 X-42.1 Y25.476 E.02421 G1 X-26 Y41.576 E.8504 G1 X-26 Y42.224 E.02421 G1 X-42.1 Y26.124 E.8504 G1 X-42.1 Y26.772 E.02421 G1 X-26 Y42.873 E.8504 G1 X-26 Y43.521 E.02421 G1 X-42.1 Y27.421 E.8504 G1 X-42.1 Y28.069 E.02421 G1 X-26 Y44.169 E.8504 G1 X-26 Y44.817 E.02421 G1 X-42.1 Y28.717 E.8504 G1 X-42.1 Y29.365 E.02421 G1 X-26 Y45.465 E.8504 G1 X-26 Y46.114 E.02421 G1 X-42.1 Y30.013 E.8504 G1 X-42.1 Y30.662 E.02421 G1 X-26 Y46.762 E.8504 G1 X-26 Y47.41 E.02421 G1 X-42.1 Y31.31 E.8504 G1 X-42.1 Y31.958 E.02421 G1 X-26 Y48.058 E.8504 G1 X-26 Y48.7 E.02397 G1 X-25.358 Y48.7 E.02397 G1 X-14.755 Y59.303 E.56006 G1 X-15.403 Y59.303 E.02421 G1 X-42.1 Y32.606 E1.41012 G1 X-42.1 Y32.7 E.0035 G1 X-42.654 Y32.7 E.02071 G1 X-16.051 Y59.303 E1.40516 G1 X-16.699 Y59.303 E.02421 G1 X-43.303 Y32.7 E1.40516 G1 X-43.951 Y32.7 E.02421 G1 X-17.348 Y59.303 E1.40516 G1 X-17.996 Y59.303 E.02421 G1 X-44.599 Y32.7 E1.40516 G1 X-45.247 Y32.7 E.02421 G1 X-18.644 Y59.303 E1.40516 G1 X-19.292 Y59.303 E.02421 G1 X-45.895 Y32.7 E1.40516 G1 X-46.544 Y32.7 E.02421 G1 X-19.94 Y59.303 E1.40516 G1 X-20.588 Y59.303 E.02421 G1 X-42.1 Y37.792 E1.13622 G1 X-42.1 Y37.3 E.01835 G1 X-42.592 Y37.3 E.01835 G1 X-47.192 Y32.7 E.24298 G1 X-47.84 Y32.7 E.02421 G1 X-43.24 Y37.3 E.24298 G1 X-43.888 Y37.3 E.02421 G1 X-48.1 Y33.088 E.22249 G1 X-48.1 Y33.736 E.02421 G1 X-44.536 Y37.3 E.18825 G1 X-45.184 Y37.3 E.02421 G1 X-48.1 Y34.384 E.15401 G1 X-48.1 Y35.032 E.02421 G1 X-45.832 Y37.3 E.11978 G1 X-46.481 Y37.3 E.02421 G1 X-48.1 Y35.681 E.08554 G1 X-48.1 Y36.329 E.02421 G1 X-47.129 Y37.3 E.0513 G1 X-47.777 Y37.3 E.02421 G1 X-48.306 Y36.771 E.02793 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-47.777 Y37.3 G1 X-47.129 Y37.3 G1 X-47.556 Y36.873 ;WIPE_END G1 X-42.306 Y38.234 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-21.237 Y59.303 E1.11285 G1 X-21.885 Y59.303 E.02421 G1 X-42.1 Y39.088 E1.06775 G1 X-42.1 Y39.736 E.02421 G1 X-22.533 Y59.303 E1.03351 G1 X-23.181 Y59.303 E.02421 G1 X-42.1 Y40.384 E.99927 G1 X-42.1 Y41.032 E.02421 G1 X-23.829 Y59.303 E.96504 G1 X-24.478 Y59.303 E.02421 G1 X-42.1 Y41.681 E.9308 G1 X-42.1 Y42.329 E.02421 G1 X-25.126 Y59.303 E.89656 G1 X-25.774 Y59.303 E.02421 G1 X-42.1 Y42.977 E.86233 G1 X-42.1 Y43.625 E.02421 G1 X-26.422 Y59.303 E.82809 G1 X-27.07 Y59.303 E.02421 G1 X-42.1 Y44.273 E.79385 G1 X-42.1 Y44.922 E.02421 G1 X-27.719 Y59.303 E.75962 G1 X-28.367 Y59.303 E.02421 G1 X-42.1 Y45.57 E.72538 G1 X-42.1 Y46.218 E.02421 G1 X-29.015 Y59.303 E.69114 G1 X-29.663 Y59.303 E.02421 G1 X-42.1 Y46.866 E.65691 G1 X-42.1 Y47.514 E.02421 G1 X-30.311 Y59.303 E.62267 G1 X-30.96 Y59.303 E.02421 G1 X-42.1 Y48.163 E.58843 G1 X-42.1 Y48.811 E.02421 G1 X-31.608 Y59.303 E.5542 G1 X-32.256 Y59.303 E.02421 G1 X-42.1 Y49.459 E.51996 G1 X-42.1 Y50.107 E.02421 G1 X-32.904 Y59.303 E.48572 G1 X-33.552 Y59.303 E.02421 G1 X-42.1 Y50.755 E.45148 G1 X-42.1 Y51.403 E.02421 G1 X-34.201 Y59.303 E.41725 G1 X-34.849 Y59.303 E.02421 G1 X-42.1 Y52.052 E.38301 G1 X-42.1 Y52.7 E.02421 G1 X-35.497 Y59.303 E.34877 G1 X-36.145 Y59.303 E.02421 G1 X-42.748 Y52.7 E.34877 G1 X-43.396 Y52.7 E.02421 G1 X-36.793 Y59.303 E.34877 G1 X-37.442 Y59.303 E.02421 G1 X-44.045 Y52.7 E.34877 G1 X-44.693 Y52.7 E.02421 G1 X-38.09 Y59.303 E.34877 G1 X-38.738 Y59.303 E.02421 G1 X-45.341 Y52.7 E.34877 G1 X-45.989 Y52.7 E.02421 G1 X-39.386 Y59.303 E.34877 G1 X-40.034 Y59.303 E.02421 G1 X-46.637 Y52.7 E.34877 G1 X-47.286 Y52.7 E.02421 G1 X-43.976 Y56.009 E.17479 G3 X-41.809 Y58.176 I-.819 J2.986 E.11973 G1 X-40.682 Y59.303 E.05952 G1 X-41.331 Y59.303 E.02421 G1 X-41.922 Y58.712 E.03123 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-41.331 Y59.303 G1 X-40.682 Y59.303 G1 X-41.047 Y58.938 ;WIPE_END G1 X-44.512 Y56.121 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-47.934 Y52.7 E.18072 G1 X-48.1 Y52.7 E.00621 G1 X-48.1 Y53.182 E.018 G1 X-45.333 Y55.949 E.14614 G2 X-45.846 Y56.084 I.26 J2.014 E.01985 G1 X-48.1 Y53.83 E.11908 G1 X-48.1 Y54.478 E.02421 G1 X-46.294 Y56.284 E.09538 G2 X-46.689 Y56.538 I.766 J1.626 E.01757 G1 X-48.1 Y55.126 E.07454 G1 X-48.1 Y55.774 E.02421 G1 X-47.03 Y56.845 E.05655 G2 X-47.322 Y57.201 I1.249 J1.327 E.01724 G1 X-48.1 Y56.423 E.04109 G1 X-48.1 Y57.071 E.02421 G1 X-47.412 Y57.759 E.03636 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-48.1 Y57.071 G1 X-48.1 Y56.423 G1 X-47.833 Y56.69 ;WIPE_END G1 X-46.887 Y49.116 Z.6 F30000 G1 X-42.94 Y17.506 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-48.1 Y12.346 E.27254 G1 X-48.1 Y12.994 E.02421 G1 X-43.794 Y17.3 E.22744 G1 X-44.442 Y17.3 E.02421 G1 X-48.1 Y13.642 E.19321 G1 X-48.1 Y14.29 E.02421 G1 X-45.091 Y17.3 E.15897 G1 X-45.739 Y17.3 E.02421 G1 X-48.1 Y14.939 E.12473 G1 X-48.1 Y15.587 E.02421 G1 X-46.387 Y17.3 E.0905 G1 X-47.035 Y17.3 E.02421 G1 X-48.1 Y16.235 E.05626 G1 X-48.1 Y16.883 E.02421 G1 X-47.478 Y17.506 E.03289 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-48.1 Y16.883 G1 X-48.1 Y16.235 G1 X-47.767 Y16.568 ;WIPE_END G1 X-46.907 Y8.984 Z.6 F30000 G1 X-45.521 Y-3.225 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-46.597 Y-4.3 E.05681 G1 X-47.245 Y-4.3 E.02421 G1 X-46.612 Y-3.667 E.03342 G2 X-47.241 Y-3.647 I-.19 J3.871 E.0235 G1 X-47.893 Y-4.3 E.03448 G1 X-48.101 Y-4.3 E.00775 G1 X-48.101 Y-3.86 E.01645 G1 X-47.612 Y-3.371 E.02584 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-48.101 Y-3.86 G1 X-48.101 Y-4.3 G1 X-47.893 Y-4.3 G1 X-47.426 Y-3.833 ;WIPE_END G1 X-43.605 Y-10.44 Z.6 F30000 G1 X-35.551 Y-24.367 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-39.1 Y-27.916 E.18748 G1 X-39.1 Y-27.268 E.02421 G1 X-36.486 Y-24.654 E.13805 G2 X-37.055 Y-24.575 I.016 J2.201 E.02152 G1 X-39.1 Y-26.62 E.108 G1 X-39.1 Y-25.972 E.02421 G1 X-37.552 Y-24.423 E.08178 G1 X-37.99 Y-24.213 E.01815 G1 X-39.1 Y-25.323 E.05863 G1 X-39.1 Y-24.675 E.02421 G1 X-38.376 Y-23.951 E.03824 G1 X-38.718 Y-23.644 E.01714 G1 X-39.1 Y-24.027 E.02021 G1 X-39.1 Y-23.379 E.02421 G1 X-38.866 Y-23.145 E.01235 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-39.1 Y-23.379 G1 X-39.1 Y-24.027 G1 X-38.718 Y-23.644 G1 X-38.376 Y-23.951 G1 X-38.391 Y-23.966 ;WIPE_END G1 X-37.138 Y-31.495 Z.6 F30000 G1 X-35.34 Y-42.305 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-39.1 Y-46.065 E.19861 G1 X-39.1 Y-45.417 E.02421 G1 X-36.346 Y-42.664 E.14545 G2 X-36.931 Y-42.6 I-.05 J2.252 E.02202 G1 X-39.1 Y-44.769 E.11457 G1 X-39.1 Y-44.121 E.02421 G1 X-37.44 Y-42.461 E.08766 G2 X-37.889 Y-42.262 I.498 J1.726 E.0184 G1 X-39.1 Y-43.473 E.06396 G1 X-39.1 Y-42.824 E.02421 G1 X-38.289 Y-42.014 E.04283 G2 X-38.642 Y-41.718 I.945 J1.488 E.01723 G1 X-39.1 Y-42.176 E.0242 G1 X-39.1 Y-41.528 E.02421 G1 X-38.805 Y-41.233 E.01559 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-39.1 Y-41.528 G1 X-39.1 Y-42.176 G1 X-38.642 Y-41.718 G1 X-38.422 Y-41.902 ;WIPE_END G1 X-39.92 Y-34.418 Z.6 F30000 G1 X-42 Y-24.019 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall ;WIDTH:0.5 G1 F3000 G1 X-42 Y-20.759 E.12142 G1 X-50.4 Y-20.759 E.31287 G1 X-50.4 Y-24.019 E.12142 G1 X-42.04 Y-24.019 E.31138 G1 X-42.5 Y-23.519 F30000 ;TYPE:Inner wall G1 F3000 G1 X-42.5 Y-21.259 E.08418 G1 X-49.9 Y-21.259 E.27562 G1 X-49.9 Y-23.519 E.08418 G1 X-42.54 Y-23.519 E.27413 G1 X-42.957 Y-23.062 F30000 G1 F3000 G1 X-42.957 Y-21.716 E.05013 G1 X-49.443 Y-21.716 E.24157 M73 P11 R72 G1 X-49.443 Y-23.062 E.05013 G1 X-42.997 Y-23.062 E.24008 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-42.957 Y-21.716 G1 X-43.611 Y-21.716 ;WIPE_END G1 X-43.094 Y-21.965 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Bottom surface ;WIDTH:0.516982 G1 F4800 G1 X-43.849 Y-22.719 E.04121 G1 X-44.519 Y-22.719 E.0259 G1 X-43.859 Y-22.059 E.03607 G1 X-44.529 Y-22.059 E.0259 G1 X-45.189 Y-22.719 E.03607 G1 X-45.86 Y-22.719 E.0259 G1 X-45.2 Y-22.059 E.03607 G1 X-45.87 Y-22.059 E.0259 G1 X-46.53 Y-22.719 E.03607 G1 X-47.201 Y-22.719 E.0259 G1 X-46.54 Y-22.059 E.03607 G1 X-47.211 Y-22.059 E.0259 G1 X-47.871 Y-22.719 E.03607 G1 X-48.541 Y-22.719 E.0259 G1 X-47.881 Y-22.059 E.03607 G1 X-48.552 Y-22.059 E.0259 G1 X-49.306 Y-22.813 E.0412 M106 S255 M106 P2 S255 ;LAYER_CHANGE ;Z:0.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.4 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-48.552 Y-22.059 G1 X-47.881 Y-22.059 G1 X-48.067 Y-22.245 ;WIPE_END ;AFTER_LAYER_CHANGE ;0.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 M140 S60 ; set bed temperature G17 G3 Z.8 I-.249 J1.191 P1 F30000 G1 X49.305 Y-1.875 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3240 G1 X49.482 Y-1.932 E.00571 G1 X49.738 Y-1.986 E.00804 G1 F3540 G1 X49.943 Y-2 E.00631 G1 X50.262 Y-1.986 E.00981 G1 X50.519 Y-1.935 E.00805 G1 X50.767 Y-1.851 E.00805 G1 X51.002 Y-1.735 E.00805 G1 X51.22 Y-1.589 E.00806 G1 X51.417 Y-1.417 E.00804 G1 X51.589 Y-1.22 E.00804 G1 X51.735 Y-1.002 E.00806 G1 X51.851 Y-.767 E.00805 G1 X51.935 Y-.519 E.00805 G1 X51.986 Y-.262 E.00805 G1 X52.004 Y0 E.00807 G1 X51.986 Y.262 E.00807 G1 X51.935 Y.519 E.00805 G1 X51.851 Y.767 E.00805 G1 X51.735 Y1.002 E.00805 G1 X51.589 Y1.22 E.00806 G1 X51.417 Y1.417 E.00804 G1 X51.22 Y1.589 E.00804 G1 X51.002 Y1.735 E.00806 G1 X50.767 Y1.851 E.00805 G1 X50.519 Y1.935 E.00805 G1 X50.262 Y1.986 E.00805 G1 X50 Y2.004 E.00807 G1 X49.738 Y1.986 E.00807 G1 X49.481 Y1.935 E.00805 G1 X49.233 Y1.851 E.00805 G1 X48.998 Y1.735 E.00805 G1 X48.78 Y1.589 E.00806 G1 X48.583 Y1.417 E.00804 G1 X48.411 Y1.22 E.00804 G1 X48.265 Y1.002 E.00806 G1 X48.149 Y.767 E.00805 G1 X48.065 Y.519 E.00805 G1 X48.025 Y.317 E.00633 G1 X47.996 Y0 E.00978 G1 X48.014 Y-.262 E.00807 G1 X48.065 Y-.519 E.00805 G1 X48.149 Y-.767 E.00805 G1 X48.265 Y-1.002 E.00805 G1 X48.411 Y-1.22 E.00806 G1 X48.583 Y-1.417 E.00804 G1 X48.78 Y-1.589 E.00804 G1 X48.998 Y-1.735 E.00806 G1 X49.233 Y-1.851 E.00805 G1 X49.267 Y-1.862 E.0011 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3540 G1 X49.482 Y-1.932 G1 X49.738 Y-1.986 G1 X49.943 Y-2 G1 X50.262 Y-1.986 G1 X50.519 Y-1.935 G1 X50.767 Y-1.851 G1 X51.002 Y-1.735 G1 X51.169 Y-1.623 ;WIPE_END G1 X50.486 Y-2.541 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X50.5 Y-2.54 E.00043 G1 X50.991 Y-2.392 E.01575 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.0156 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.0156 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.446 Y-2.545 E.01379 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.416 Y-2.253 F30000 ;TYPE:Gap infill ;WIDTH:0.187279 G1 F12000 G1 X50 Y-2.289 E.00492 G2 X48.014 Y-1.141 I-.001 J2.29 E.02826 G1 X47.879 Y-.879 E.00348 G1 X47.786 Y-.589 E.00358 G2 X47.704 Y0 I2.551 J.654 E.007 G1 X47.74 Y.374 E.00442 G2 X50.455 Y-2.244 I2.259 J-.374 E.1171 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.289 G1 X49.553 Y-2.249 G1 X49.121 Y-2.121 G1 X48.726 Y-1.907 G1 X48.575 Y-1.785 ;WIPE_END G1 X41.008 Y-.793 Z.8 F30000 G1 X28.192 Y.886 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X28.015 Y1.213 E.01141 G3 X26.2 Y2.185 I-1.818 J-1.213 E.06589 G3 X25.986 Y-2.175 I.003 J-2.185 E.2042 G3 X28.217 Y.835 I.212 J2.175 E.13832 G1 X28.21 Y.85 E.00051 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.015 Y1.213 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.746 Y2.107 ;WIPE_END G1 X19.289 Y.478 Z.8 F30000 G1 X7.71 Y-2.052 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.15 J2.165 E.33486 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.963 Y3.37 I1.598 J1.51 E.06666 G3 X8.454 Y7.024 I-.265 J2.029 E.24876 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.557 Y4.266 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.561 Y4.261 E.0002 G3 X9.283 Y3.844 I1.138 J1.137 E.02591 G1 X9.49 Y3.803 E.00647 G3 X8.423 Y4.42 I.21 J1.595 E.27173 G1 X8.531 Y4.296 E.00504 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.561 Y4.261 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.49 Y3.803 G1 X9.68 Y3.791 G1 X9.909 Y3.803 G1 X10.117 Y3.844 G1 X10.316 Y3.912 G1 X10.368 Y3.938 ;WIPE_END G1 X3.16 Y6.449 Z.8 F30000 G1 X-16.248 Y13.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.15 J-2.165 E.33486 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.269 J-2.028 E.24861 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 M73 P11 R71 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.461 Y8.974 Z.8 F30000 G1 X-29.157 Y6.534 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.163 Y6.537 E.0002 G3 X-30.717 Y3.844 I-1.137 J-1.138 E.18114 G1 X-30.51 Y3.803 E.00647 G3 X-29.025 Y6.379 I.21 J1.595 E.1165 G1 X-29.131 Y6.504 E.00506 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.163 Y6.537 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.698 Y6.959 G1 X-30.915 Y6.888 G1 X-30.969 Y6.862 ;WIPE_END G1 X-33.034 Y-.486 Z.8 F30000 G1 X-38.995 Y-21.7 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.964 Y-21.897 E.00658 G3 X-37.962 Y-23.453 I2.657 J.61 E.06268 G3 X-36.402 Y-24.011 I1.678 J2.236 E.05579 G3 X-39.01 Y-21.645 I.094 J2.724 E.4411 G1 X-39.005 Y-21.662 E.00058 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.596 Y-21.621 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.547 Y-21.89 E.00907 G3 X-37.461 Y-23.298 I2.239 J.603 E.06054 G3 X-36.375 Y-23.605 I1.142 J1.973 E.03781 G3 X-38.607 Y-21.583 I.067 J2.318 E.37459 G1 X-38.169 Y-21.536 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.125 Y-21.777 E.00753 G3 X-37.022 Y-23.03 I1.818 J.49 E.05315 G3 X-36.347 Y-23.17 I.751 J1.916 E.02129 G3 X-38.178 Y-21.5 I.04 J1.883 E.28045 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.125 Y-21.777 G1 X-38.042 Y-22.01 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.029 Y-23.026 ;WIPE_END G1 X-29.409 Y-22.595 Z.8 F30000 G1 X-15.911 Y-21.832 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.869 Y-21.608 E.00755 G3 X-18.935 Y-23.659 I-2.431 J.317 E.37251 G1 X-18.62 Y-23.721 E.01065 G3 X-15.932 Y-21.923 I.32 J2.431 E.11719 G1 X-15.92 Y-21.871 E.00176 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.31 Y-21.752 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.273 Y-21.555 E.00667 G3 X-18.83 Y-23.265 I-2.027 J.265 E.31059 G1 X-18.567 Y-23.317 E.00888 G3 X-16.325 Y-21.817 I.267 J2.027 E.09771 G1 X-16.319 Y-21.791 E.00088 G1 X-16.737 Y-21.668 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.705 Y-21.498 E.0053 G3 X-18.717 Y-22.844 I-1.595 J.208 E.22641 G1 X-18.51 Y-22.885 E.00647 G3 X-16.746 Y-21.706 I.21 J1.595 E.07116 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.705 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.32 Y-20.01 G1 X-17.405 Y-19.954 ;WIPE_END G1 X-18.45 Y-27.514 Z.8 F30000 G1 X-20.277 Y-40.737 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.247 Y-40.782 E.00179 G3 X-18.935 Y-41.659 I1.946 J1.491 E.05328 G1 X-18.62 Y-41.721 E.01065 G3 X-20.425 Y-40.515 I.32 J2.431 E.43641 G1 X-20.299 Y-40.704 E.00753 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.511 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.923 Y-40.534 E.00091 G3 X-18.83 Y-41.265 I1.623 J1.243 E.04443 G1 X-18.567 Y-41.317 E.00888 G3 X-20.072 Y-40.311 I.267 J2.027 E.36387 G1 X-19.961 Y-40.478 E.00664 G1 X-19.577 Y-40.268 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-18.717 Y-40.844 I1.277 J.978 E.03238 G1 X-18.51 Y-40.885 E.00647 G3 X-19.601 Y-40.236 I.21 J1.595 E.2705 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.28 Y-40.566 G1 X-19.121 Y-40.672 G1 X-18.917 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.51 Y-40.885 G1 X-18.32 Y-40.897 G1 X-18.091 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.822 Y-40.823 ;WIPE_END G1 X-25.362 Y-39.636 Z.8 F30000 G1 X-33.757 Y-38.315 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.787 Y-38.247 E.00246 G3 X-37.962 Y-41.453 I-2.521 J-1.039 E.33187 G3 X-36.402 Y-42.011 I1.678 J2.236 E.05579 G3 X-33.649 Y-38.683 I.094 J2.725 E.16536 G1 X-33.745 Y-38.353 E.01139 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.145 Y-38.433 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.163 Y-38.403 E.00117 G3 X-37.461 Y-41.298 I-2.144 J-.884 E.29239 G3 X-36.375 Y-41.605 I1.142 J1.973 E.03781 G3 X-34.049 Y-38.762 I.067 J2.318 E.14062 G1 X-34.134 Y-38.471 E.01005 G1 X-34.566 Y-38.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-37.022 Y-41.03 I-1.74 J-.718 E.22746 G3 X-36.347 Y-41.17 I.751 J1.916 E.02129 G3 X-34.552 Y-38.607 I.04 J1.882 E.1135 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.667 Y-38.345 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.042 Y-37.421 ;WIPE_END G1 X-36.784 Y-29.825 Z.8 F30000 G1 X-42.748 Y31.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z.8 F30000 G1 X-42.748 Y51.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z.8 F30000 G1 X4.752 Y47.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z.8 F30000 G1 X4.752 Y33.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z.8 F30000 G1 X27.252 Y31.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z.8 F30000 G1 X-28.09 Y-52.948 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45572 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.946 E.32013 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32013 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45573 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z.8 F30000 G1 X7.055 Y-53.79 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z.8 F30000 G1 X-40.155 Y-5.355 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.186 J1.445 E.44457 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.644 Y57.55 I-1.609 J-1.344 E.10202 G2 X22.428 Y60.023 I-1.443 J1.452 E.19525 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.356 Y57.55 I-1.608 J-1.344 E.10202 G2 X-46.572 Y60.023 I-1.443 J1.452 E.19525 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.186 J-1.445 E.44457 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.305 Y-2.784 Z.8 F30000 G1 X-48.759 Y-.949 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.615 Y-1.213 E.00923 G3 X-47.014 Y-2.175 I1.818 J1.213 E.0593 G3 X-46.8 Y2.185 I.212 J2.175 E.21737 G3 X-48.817 Y-.835 I.003 J-2.185 E.13173 G1 X-48.777 Y-.913 E.00269 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.615 Y-1.213 G1 X-48.345 Y-1.545 G1 X-48.014 Y-1.817 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.277 Y-2.122 ;WIPE_END G1 X-47.143 Y5.509 Z.8 F30000 G1 X-46.192 Y59.809 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.192 Y59.804 E.00017 G3 X-45.01 Y57.403 I1.396 J-.804 E.09701 G3 X-44.8 Y60.61 I.207 J1.597 E.16172 G3 X-46.075 Y59.979 I.004 J-1.611 E.0453 G1 X-46.169 Y59.842 E.00509 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.192 Y59.804 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.038 Y57.975 ;WIPE_END G1 X-38.409 Y58.178 Z.8 F30000 G1 X22.808 Y59.809 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.807 Y59.804 E.00016 G3 X23.783 Y57.444 I1.392 J-.806 E.09063 G1 X23.99 Y57.403 E.00647 G3 X22.924 Y59.979 I.21 J1.595 E.20701 G1 X22.831 Y59.842 E.00509 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.807 Y59.804 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.962 Y57.975 ;WIPE_END G1 X17.574 Y52.569 Z.8 F30000 G1 X-40.59 Y-5.79 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-43.895 Y-3.798 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.42695 G1 F15000 G1 X-45.092 Y-3.798 E.03745 G3 X-44.334 Y-3.359 I-1.093 J2.758 E.0275 G1 X-43.923 Y-3.77 E.01819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.976 Y-4.179 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.423778 G1 F15000 G2 X-47.118 Y-4.174 I-1.362 J602.447 E.12853 ;WIDTH:0.442938 G1 X-47.423 Y-4.161 E.00995 ;WIDTH:0.470763 G3 X-47.948 Y-4.148 I-.415 J-6.06 E.01831 G1 X-47.948 Y-3.65 E.01734 G1 X-47.229 Y-3.78 E.02546 ;WIDTH:0.423946 G1 X-46.49 Y-3.788 E.02296 G1 X-45.752 Y-3.648 E.02332 G1 X-45.06 Y-3.373 E.02311 G1 X-44.435 Y-2.969 E.0231 G1 X-44.303 Y-2.852 E.00548 G1 X-43.005 Y-4.15 E.05702 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.066 Y-4.556 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-48.356 Y-4.556 E.19327 G1 X-48.356 Y-3.041 E.04654 G1 X-47.81 Y-3.267 E.01814 G1 X-47.154 Y-3.401 E.0206 G1 X-46.489 Y-3.406 E.02042 G1 X-45.825 Y-3.278 E.02078 G1 X-45.204 Y-3.025 E.0206 G1 X-44.645 Y-2.655 E.0206 G1 X-44.303 Y-2.319 E.01474 G1 X-42.094 Y-4.528 E.09598 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.135 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409513 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385476 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342223 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305489 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275113 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276405 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307219 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344558 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.393963 G2 X-49.135 Y1.264 I8.179 J-1.358 E.0117 G1 X-48.392 Y2.903 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-48.456 Y2.94 E.00204 G1 X-48.391 Y2.975 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-48.409 Y52.537 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-48.472 Y52.574 E.00204 G1 X-48.407 Y52.608 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.592 Y52.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-47.655 Y52.337 E.00204 G1 X-47.59 Y52.371 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.534 Y59.534 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.388842 G1 F15000 G1 X-47.599 Y59.571 E.00211 G1 X-47.532 Y59.606 E.00211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.476 Y59.676 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-48.199 Y59.689 E.00766 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-48.476 Y59.676 ;WIPE_END G1 X-46.09 Y52.425 Z.8 F30000 G1 X-29.525 Y2.073 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.381457 G1 F15000 G1 X-30.043 Y2.592 E.02021 G1 X-29.525 Y2.701 E.01461 G1 X-29.525 Y2.113 E.0162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.913 Y-18.241 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-37.483 Y-18.4 E.01817 G1 X-37.982 Y-18.665 E.01736 G1 X-38.498 Y-19.072 E.02021 G3 X-39.035 Y-19.815 I1.822 J-1.881 E.02831 G1 X-39.356 Y-19.762 E.00999 G1 X-39.356 Y-15.798 E.1218 G1 X-36.942 Y-18.212 E.1049 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.633 Y-18.054 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G3 X-38.459 Y-18.536 I1.327 J-3.225 E.02945 G1 X-38.979 Y-19.045 E.02238 G1 X-38.979 Y-16.709 E.0718 G1 X-37.661 Y-18.026 E.05725 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.221 Y-17.958 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.360478 G1 F15000 G1 X-38.631 Y-18.231 E.01277 G1 X-38.631 Y-17.547 E.01771 G1 X-38.249 Y-17.93 E.014 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-20.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465141 G1 F12000 G1 X-39.333 Y-20.461 E.0101 ;WIDTH:0.441848 G3 X-39.356 Y-20.68 I3.321 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-20.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-21.682 I8.953 J-.421 E.02139 ;WIDTH:0.399141 G3 X-39.356 Y-21.896 I3.283 J.204 E.00624 ;WIDTH:0.439032 G1 X-39.337 Y-22.088 E.00622 ;WIDTH:0.475343 G3 X-39.285 Y-22.405 I4.886 J.63 E.01132 G1 X-38.129 Y-23.62 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-37.998 Y-23.736 E.00485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.973 Y-22.71 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.037 Y-22.673 E.00204 G1 X-38.972 Y-22.638 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.467 Y-36.05 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.616806 G1 F13335.509 G2 X-38.452 Y-35.953 I-.036 J.056 E.0142 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.979 Y-34.84 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-37.723 Y-36.096 E.05457 G1 X-38.239 Y-36.383 E.01815 G1 X-38.747 Y-36.789 E.01997 G1 X-38.979 Y-37.045 E.01063 G1 X-38.979 Y-34.88 E.06654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.356 Y-33.93 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-37.028 Y-36.257 E.10115 G1 X-37.506 Y-36.409 E.0154 G1 X-38.03 Y-36.697 E.01836 G1 X-38.498 Y-37.072 E.01846 G3 X-39.035 Y-37.815 I1.822 J-1.881 E.02831 G1 X-39.356 Y-37.762 E.00999 G1 X-39.356 Y-33.97 E.11654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-38.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465138 G1 F12000 G1 X-39.333 Y-38.461 E.0101 ;WIDTH:0.441846 G3 X-39.356 Y-38.68 I3.321 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-38.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-39.682 I8.952 J-.421 E.02139 ;WIDTH:0.399139 G3 X-39.356 Y-39.896 I3.285 J.204 E.00624 ;WIDTH:0.439025 G1 X-39.337 Y-40.088 E.00622 ;WIDTH:0.475338 G3 X-39.285 Y-40.405 I4.891 J.631 E.01132 G1 X-39.016 Y-40.72 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G3 X-38.358 Y-41.474 I3.713 J2.578 E.02776 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 X-26.895 Y-59.653 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-26.959 Y-59.616 E.00204 G1 X-26.894 Y-59.581 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.404 Y-59.662 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-51.467 Y-59.625 E.00204 G1 X-51.402 Y-59.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.851 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X14.549 Y-60 E.19 G1 X29.923 Y-52.487 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.505729 G1 F15000 G1 X30.713 Y-52.487 E.0298 G1 X30.713 Y-53.277 E.0298 G1 X29.951 Y-52.515 E.04063 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.713 Y-53.277 G1 X30.713 Y-52.487 G1 X30.58 Y-52.487 ;WIPE_END G1 X29.966 Y-44.879 Z.8 F30000 G1 X26.616 Y-3.38 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.885 Y-3.35 E.00831 G1 X27.492 Y-3.167 E.01947 G1 X27.756 Y-3.031 E.00913 G1 X27.756 Y-4.519 E.04574 G1 X26.645 Y-3.408 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.399 Y-3.642 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427538 G1 F15000 G1 X27.327 Y-3.6 E.00261 G1 X27.403 Y-3.565 E.00262 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393964 G1 F12000 G3 X28.611 Y-.863 I-8.102 J1.76 E.0117 ;WIDTH:0.34456 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.307221 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342223 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385476 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409515 G1 X28.535 Y1.264 E.00864 G1 X26.463 Y17.562 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.40658 G1 F15000 G1 X27.048 Y17.562 E.01734 G1 X27.105 Y17.415 E.00466 ;WIDTH:0.413134 G1 X27.168 Y17.374 E.00226 ;WIDTH:0.443586 G1 X27.231 Y17.333 E.00245 ;WIDTH:0.480624 G1 X27.462 Y17.311 E.00828 ;WIDTH:0.543078 G1 X27.693 Y17.289 E.00946 G1 X27.693 Y16.43 E.03501 G1 X27.263 Y16.86 E.02475 ;WIDTH:0.521367 G1 X27.127 Y16.961 E.00663 ;WIDTH:0.471983 G1 X26.991 Y17.063 E.00595 ;WIDTH:0.410119 G1 X26.854 Y17.164 E.00509 G1 X26.491 Y17.534 E.01549 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y32.256 E.57795 G1 X26.962 Y37.465 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.601642 G1 F13697.44 G1 X27.021 Y37.388 E.00445 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.368 Y36.965 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.493 G1 F15000 G1 X27.207 Y37.16 E.0093 ;WIDTH:0.54057 G1 X27.046 Y37.356 E.01028 G1 X27.231 Y37.306 E.00777 ;WIDTH:0.481473 G1 X27.732 Y37.328 E.01792 G1 X27.732 Y36.601 E.02597 G1 X27.396 Y36.936 E.01694 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X28.122 Y54.361 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.420206 G1 F15000 G1 X25.677 Y56.806 E.10629 G2 X25.337 Y56.612 I-.907 J1.193 E.01206 G1 X27.952 Y53.997 E.11367 G1 X27.952 Y53.464 E.0164 G1 X24.953 Y56.462 E.13038 G2 X24.513 Y56.369 I-1.059 J3.915 E.01384 G1 X27.952 Y52.93 E.14952 G1 X27.952 Y52.452 E.01471 G1 X27.897 Y52.452 E.0017 G1 X23.791 Y56.557 E.17851 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.757 Y58.591 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X20.596 Y59.752 E.05048 G1 X20.063 Y59.752 E.0164 G1 X21.711 Y58.104 E.07165 G3 X23.304 Y56.511 I2.447 J.854 E.07166 G1 X27.363 Y52.452 E.17649 G1 X27.238 Y52.452 E.00384 G1 X27.238 Y52.248 E.00626 G1 X27.033 Y52.248 E.0063 G1 X19.529 Y59.752 E.32625 G1 X18.996 Y59.752 E.0164 G1 X26.5 Y52.248 E.32625 G1 X25.966 Y52.248 E.0164 G1 X18.462 Y59.752 E.32625 G1 X17.929 Y59.752 E.0164 G1 X25.432 Y52.248 E.32625 G1 X24.899 Y52.248 E.0164 G1 X17.395 Y59.752 E.32625 G1 X16.862 Y59.752 E.0164 G1 X24.365 Y52.248 E.32625 G1 X23.832 Y52.248 E.0164 G1 X16.328 Y59.752 E.32625 G1 X15.794 Y59.752 E.0164 G1 X23.298 Y52.248 E.32625 G1 X22.765 Y52.248 E.0164 G1 X15.261 Y59.752 E.32625 G1 X14.727 Y59.752 E.0164 G1 X22.231 Y52.248 E.32625 G1 X21.952 Y52.248 E.00858 G1 X21.952 Y51.994 E.00782 G1 X14.194 Y59.752 E.33731 G1 X13.66 Y59.752 E.0164 G1 X21.952 Y51.46 E.36051 G1 X21.952 Y50.927 E.0164 G1 X13.127 Y59.752 E.38371 G1 X12.593 Y59.752 E.0164 G1 X21.952 Y50.393 E.40691 G1 X21.952 Y49.859 E.0164 G1 X12.059 Y59.752 E.43011 G1 X11.526 Y59.752 E.0164 G1 X21.952 Y49.326 E.45331 G1 X21.952 Y48.792 E.0164 G1 X10.992 Y59.752 E.47651 G1 X10.459 Y59.752 E.0164 G1 X21.952 Y48.259 E.4997 G1 X21.952 Y47.725 E.0164 G1 X9.925 Y59.752 E.5229 G1 X9.392 Y59.752 E.0164 G1 X21.952 Y47.192 E.5461 G1 X21.952 Y46.658 E.0164 G1 X8.858 Y59.752 E.5693 G1 X8.325 Y59.752 E.0164 G1 X21.952 Y46.125 E.5925 G1 X21.952 Y45.591 E.0164 G1 X7.791 Y59.752 E.6157 G1 X7.257 Y59.752 E.0164 G1 X21.952 Y45.057 E.6389 G1 X21.952 Y44.524 E.0164 G1 X6.724 Y59.752 E.66209 G1 X6.19 Y59.752 E.0164 G1 X21.952 Y43.99 E.68529 G1 X21.952 Y43.457 E.0164 G1 X5.657 Y59.752 E.70849 G1 X5.123 Y59.752 E.0164 G1 X21.952 Y42.923 E.73169 G1 X21.952 Y42.39 E.0164 G1 X4.59 Y59.752 E.75489 G1 X4.056 Y59.752 E.0164 G1 X21.952 Y41.856 E.77809 G1 X21.952 Y41.322 E.0164 G1 X3.522 Y59.752 E.80129 G1 X2.989 Y59.752 E.0164 G1 X21.952 Y40.789 E.82448 G1 X21.952 Y40.255 E.0164 G1 X2.455 Y59.752 E.84768 G1 X1.922 Y59.752 E.0164 G1 X21.952 Y39.722 E.87088 G1 X21.952 Y39.188 E.0164 G1 X1.388 Y59.752 E.89408 G1 X.855 Y59.752 E.0164 G1 X22.122 Y38.485 E.92466 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.886 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y35.856 E.08981 G1 X27.952 Y35.322 E.0164 G1 X25.522 Y37.752 E.10563 G1 X24.989 Y37.752 E.0164 G1 X27.952 Y34.789 E.12883 G1 X27.952 Y34.255 E.0164 G1 X24.455 Y37.752 E.15203 G1 X23.922 Y37.752 E.0164 G1 X27.952 Y33.722 E.17522 G1 X27.952 Y33.188 E.0164 G1 X23.388 Y37.752 E.19842 G1 X22.855 Y37.752 E.0164 G1 X27.952 Y32.655 E.22162 G1 X27.952 Y32.452 E.00624 G1 X27.621 Y32.452 E.01016 G1 X22.321 Y37.752 E.23045 G1 X21.952 Y37.752 E.01135 G1 X21.952 Y38.121 E.01135 G1 X.321 Y59.752 E.94048 G1 X-.212 Y59.752 E.0164 G1 X27.238 Y32.301 E1.19351 G1 X27.238 Y32.248 E.00164 G1 X26.758 Y32.248 E.01477 G1 X-.746 Y59.752 E1.19583 G1 X-1.28 Y59.752 E.0164 G1 X26.224 Y32.248 E1.19583 G1 X25.691 Y32.248 E.0164 G1 X-1.813 Y59.752 E1.19583 G1 X-2.347 Y59.752 E.0164 G1 X25.157 Y32.248 E1.19583 G1 X24.624 Y32.248 E.0164 G1 X-2.88 Y59.752 E1.19583 G1 X-3.414 Y59.752 E.0164 G1 X24.09 Y32.248 E1.19583 G1 X23.556 Y32.248 E.0164 G1 X-3.947 Y59.752 E1.19583 G1 X-4.481 Y59.752 E.0164 G1 X23.023 Y32.248 E1.19583 G1 X22.489 Y32.248 E.0164 G1 X-5.015 Y59.752 E1.19583 G1 X-5.548 Y59.752 E.0164 G1 X21.956 Y32.248 E1.19583 G1 X21.952 Y31.718 E.01629 G1 X-6.082 Y59.752 E1.21886 G1 X-6.615 Y59.752 E.0164 G1 X21.952 Y31.185 E1.24206 G1 X21.952 Y30.651 E.0164 G1 X4.948 Y47.655 E.7393 G1 X4.948 Y47.121 E.0164 G1 X21.952 Y30.118 E.7393 G1 X21.952 Y29.584 E.0164 G1 X4.948 Y46.588 E.7393 G1 X4.948 Y46.054 E.0164 G1 X21.952 Y29.051 E.7393 G1 X21.952 Y28.517 E.0164 G1 X4.948 Y45.521 E.7393 G1 X4.948 Y44.987 E.0164 G1 X21.952 Y27.983 E.7393 G1 X21.952 Y27.45 E.0164 G1 X4.948 Y44.454 E.7393 G1 X4.948 Y43.92 E.0164 G1 X21.952 Y26.916 E.7393 G1 X21.952 Y26.383 E.0164 G1 X4.948 Y43.386 E.7393 G1 X4.948 Y42.853 E.0164 G1 X21.952 Y25.849 E.7393 G1 X21.952 Y25.316 E.0164 M73 P12 R71 G1 X4.948 Y42.319 E.7393 G1 X4.948 Y41.786 E.0164 G1 X21.952 Y24.782 E.7393 G1 X21.952 Y24.248 E.0164 G1 X4.948 Y41.252 E.7393 G1 X4.948 Y40.719 E.0164 G1 X21.952 Y23.715 E.7393 G1 X21.952 Y23.181 E.0164 G1 X4.948 Y40.185 E.7393 G1 X4.948 Y39.652 E.0164 G1 X21.952 Y22.648 E.7393 G1 X21.952 Y22.114 E.0164 G1 X4.948 Y39.118 E.7393 G1 X4.948 Y38.584 E.0164 G1 X21.952 Y21.581 E.7393 G1 X21.952 Y21.047 E.0164 G1 X4.948 Y38.051 E.7393 G1 X4.948 Y37.752 E.00919 G1 X4.714 Y37.752 E.00721 G1 X21.952 Y20.514 E.7495 G1 X21.952 Y19.98 E.0164 G1 X4.18 Y37.752 E.7727 G1 X3.646 Y37.752 E.0164 G1 X21.952 Y19.446 E.7959 G1 X21.952 Y18.913 E.0164 G1 X3.113 Y37.752 E.8191 G1 X2.579 Y37.752 E.0164 G1 X22.122 Y18.21 E.84967 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.611 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y15.581 E.10178 G1 X27.952 Y15.047 E.0164 G1 X25.247 Y17.752 E.1176 G1 X24.714 Y17.752 E.0164 G1 X27.952 Y14.514 E.1408 G1 X27.952 Y13.98 E.0164 G1 X24.18 Y17.752 E.164 G1 X23.646 Y17.752 E.0164 G1 X27.952 Y13.446 E.1872 G1 X27.952 Y12.913 E.0164 G1 X23.113 Y17.752 E.2104 G1 X22.579 Y17.752 E.0164 G1 X27.952 Y12.379 E.23359 G1 X27.952 Y11.846 E.0164 G1 X2.046 Y37.752 E1.12637 G1 X1.512 Y37.752 E.0164 G1 X27.952 Y11.312 E1.14956 G1 X27.952 Y10.779 E.0164 G1 X4.948 Y33.782 E1.00017 G1 X4.948 Y34.248 E.01432 G1 X4.482 Y34.248 E.01432 G1 X.979 Y37.752 E.15234 G1 X.445 Y37.752 E.0164 G1 X3.949 Y34.248 E.15234 G1 X3.415 Y34.248 E.0164 G1 X-.089 Y37.752 E.15234 G1 X-.622 Y37.752 E.0164 G1 X2.882 Y34.248 E.15234 G1 X2.348 Y34.248 E.0164 G1 X-1.156 Y37.752 E.15234 G1 X-1.689 Y37.752 E.0164 G1 X1.815 Y34.248 E.15234 G1 X1.281 Y34.248 E.0164 G1 X-2.223 Y37.752 E.15234 G1 X-2.756 Y37.752 E.0164 G1 X.747 Y34.248 E.15234 G1 X.214 Y34.248 E.0164 G1 X-3.29 Y37.752 E.15234 G1 X-3.823 Y37.752 E.0164 G1 X-.32 Y34.248 E.15234 G1 X-.853 Y34.248 E.0164 G1 X-4.357 Y37.752 E.15234 G1 X-4.891 Y37.752 E.0164 G1 X-1.387 Y34.248 E.15234 G1 X-1.92 Y34.248 E.0164 G1 X-5.424 Y37.752 E.15234 G1 X-5.958 Y37.752 E.0164 G1 X-2.454 Y34.248 E.15234 G1 X-2.988 Y34.248 E.0164 G1 X-6.491 Y37.752 E.15234 G1 X-7.025 Y37.752 E.0164 G1 X-3.521 Y34.248 E.15234 G1 X-4.055 Y34.248 E.0164 G1 X-7.558 Y37.752 E.15234 G1 X-8.092 Y37.752 E.0164 G1 X-4.588 Y34.248 E.15234 G1 X-5.122 Y34.248 E.0164 G1 X-8.626 Y37.752 E.15234 G1 X-9.159 Y37.752 E.0164 G1 X-5.655 Y34.248 E.15234 G1 X-6.189 Y34.248 E.0164 G1 X-9.693 Y37.752 E.15234 G1 X-10.226 Y37.752 E.0164 G1 X-6.722 Y34.248 E.15234 G1 X-7.256 Y34.248 E.0164 G1 X-10.76 Y37.752 E.15234 G1 X-11.293 Y37.752 E.0164 G1 X-7.79 Y34.248 E.15234 G1 X-8.323 Y34.248 E.0164 G1 X-11.827 Y37.752 E.15234 G1 X-12.361 Y37.752 E.0164 G1 X-8.857 Y34.248 E.15234 G1 X-9.39 Y34.248 E.0164 G1 X-12.894 Y37.752 E.15234 G1 X-13.428 Y37.752 E.0164 G1 X-9.924 Y34.248 E.15234 G1 X-10.457 Y34.248 E.0164 G1 X-13.961 Y37.752 E.15234 G1 X-14.495 Y37.752 E.0164 G1 X-10.991 Y34.248 E.15234 G1 X-11.525 Y34.248 E.0164 G1 X-15.028 Y37.752 E.15234 G1 X-15.562 Y37.752 E.0164 G1 X-12.058 Y34.248 E.15234 G1 X-12.592 Y34.248 E.0164 G1 X-16.095 Y37.752 E.15234 G1 X-16.629 Y37.752 E.0164 G1 X-13.125 Y34.248 E.15234 G1 X-13.659 Y34.248 E.0164 G1 X-17.163 Y37.752 E.15234 G1 X-17.696 Y37.752 E.0164 G1 X-14.192 Y34.248 E.15234 G1 X-14.726 Y34.248 E.0164 G1 X-18.23 Y37.752 E.15234 G1 X-18.763 Y37.752 E.0164 G1 X-15.259 Y34.248 E.15234 G1 X-15.793 Y34.248 E.0164 G1 X-19.297 Y37.752 E.15234 G1 X-19.83 Y37.752 E.0164 G1 X-16.327 Y34.248 E.15234 G1 X-16.86 Y34.248 E.0164 G1 X-20.364 Y37.752 E.15234 G1 X-20.898 Y37.752 E.0164 G1 X-17.394 Y34.248 E.15234 G1 X-17.927 Y34.248 E.0164 G1 X-21.431 Y37.752 E.15234 G1 X-21.965 Y37.752 E.0164 G1 X-18.461 Y34.248 E.15234 G1 X-18.994 Y34.248 E.0164 G1 X-22.498 Y37.752 E.15234 G1 X-23.032 Y37.752 E.0164 G1 X-19.528 Y34.248 E.15234 G1 X-20.062 Y34.248 E.0164 G1 X-23.565 Y37.752 E.15234 G1 X-24.099 Y37.752 E.0164 G1 X-20.595 Y34.248 E.15234 G1 X-21.129 Y34.248 E.0164 G1 X-24.802 Y37.922 E.15972 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-23.388 Y36.507 ;WIPE_END G1 X-16.337 Y39.43 Z.8 F30000 G1 X4.525 Y48.078 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-7.149 Y59.752 E.50755 G1 X-7.682 Y59.752 E.0164 G1 X3.821 Y48.248 E.50017 G1 X3.288 Y48.248 E.0164 G1 X-8.216 Y59.752 E.50017 G1 X-8.749 Y59.752 E.0164 G1 X2.754 Y48.248 E.50017 G1 X2.221 Y48.248 E.0164 G1 X-9.283 Y59.752 E.50017 G1 X-9.817 Y59.752 E.0164 G1 X1.687 Y48.248 E.50017 G1 X1.154 Y48.248 E.0164 G1 X-10.35 Y59.752 E.50017 G1 X-10.884 Y59.752 E.0164 G1 X.62 Y48.248 E.50017 G1 X.086 Y48.248 E.0164 G1 X-11.417 Y59.752 E.50017 G1 X-11.951 Y59.752 E.0164 G1 X-.447 Y48.248 E.50017 G1 X-.981 Y48.248 E.0164 G1 X-12.484 Y59.752 E.50017 G1 X-13.018 Y59.752 E.0164 G1 X-1.514 Y48.248 E.50017 G1 X-2.048 Y48.248 E.0164 G1 X-13.552 Y59.752 E.50017 G1 X-14.085 Y59.752 E.0164 G1 X-2.581 Y48.248 E.50017 G1 X-3.115 Y48.248 E.0164 G1 X-14.619 Y59.752 E.50017 G1 X-15.152 Y59.752 E.0164 G1 X-3.648 Y48.248 E.50017 G1 X-4.182 Y48.248 E.0164 G1 X-15.686 Y59.752 E.50017 G1 X-16.219 Y59.752 E.0164 G1 X-4.716 Y48.248 E.50017 G1 X-5.249 Y48.248 E.0164 G1 X-16.753 Y59.752 E.50017 G1 X-17.286 Y59.752 E.0164 G1 X-5.783 Y48.248 E.50017 G1 X-6.316 Y48.248 E.0164 G1 X-17.82 Y59.752 E.50017 G1 X-18.354 Y59.752 E.0164 G1 X-6.85 Y48.248 E.50017 G1 X-7.383 Y48.248 E.0164 G1 X-18.887 Y59.752 E.50017 G1 X-19.421 Y59.752 E.0164 G1 X-7.917 Y48.248 E.50017 G1 X-8.451 Y48.248 E.0164 G1 X-19.954 Y59.752 E.50017 G1 X-20.488 Y59.752 E.0164 G1 X-8.984 Y48.248 E.50017 G1 X-9.518 Y48.248 E.0164 G1 X-21.021 Y59.752 E.50017 G1 X-21.555 Y59.752 E.0164 G1 X-10.051 Y48.248 E.50017 G1 X-10.585 Y48.248 E.0164 G1 X-22.089 Y59.752 E.50017 G1 X-22.622 Y59.752 E.0164 G1 X-11.118 Y48.248 E.50017 G1 X-11.652 Y48.248 E.0164 G1 X-23.156 Y59.752 E.50017 G1 X-23.689 Y59.752 E.0164 G1 X-12.185 Y48.248 E.50017 G1 X-12.719 Y48.248 E.0164 G1 X-24.223 Y59.752 E.50017 G1 X-24.756 Y59.752 E.0164 G1 X-13.253 Y48.248 E.50017 G1 X-13.786 Y48.248 E.0164 G1 X-25.29 Y59.752 E.50017 G1 X-25.824 Y59.752 E.0164 G1 X-14.32 Y48.248 E.50017 G1 X-14.853 Y48.248 E.0164 G1 X-26.357 Y59.752 E.50017 G1 X-26.891 Y59.752 E.0164 G1 X-15.387 Y48.248 E.50017 G1 X-15.92 Y48.248 E.0164 G1 X-27.424 Y59.752 E.50017 G1 X-27.958 Y59.752 E.0164 G1 X-16.454 Y48.248 E.50017 G1 X-16.988 Y48.248 E.0164 G1 X-28.491 Y59.752 E.50017 G1 X-29.025 Y59.752 E.0164 G1 X-17.521 Y48.248 E.50017 G1 X-18.055 Y48.248 E.0164 G1 X-29.558 Y59.752 E.50017 G1 X-30.092 Y59.752 E.0164 G1 X-18.588 Y48.248 E.50017 G1 X-19.122 Y48.248 E.0164 G1 X-30.626 Y59.752 E.50017 G1 X-31.159 Y59.752 E.0164 G1 X-19.655 Y48.248 E.50017 G1 X-20.189 Y48.248 E.0164 G1 X-31.693 Y59.752 E.50017 G1 X-32.226 Y59.752 E.0164 G1 X-20.722 Y48.248 E.50017 G1 X-21.256 Y48.248 E.0164 G1 X-32.76 Y59.752 E.50017 G1 X-33.293 Y59.752 E.0164 G1 X-21.79 Y48.248 E.50017 G1 X-22.323 Y48.248 E.0164 G1 X-33.827 Y59.752 E.50017 G1 X-34.361 Y59.752 E.0164 G1 X-22.857 Y48.248 E.50017 G1 X-23.39 Y48.248 E.0164 G1 X-34.894 Y59.752 E.50017 G1 X-35.428 Y59.752 E.0164 G1 X-23.924 Y48.248 E.50017 G1 X-24.457 Y48.248 E.0164 G1 X-35.961 Y59.752 E.50017 G1 X-36.495 Y59.752 E.0164 G1 X-24.991 Y48.248 E.50017 G1 X-25.525 Y48.248 E.0164 G1 X-37.028 Y59.752 E.50017 G1 X-37.562 Y59.752 E.0164 G1 X-25.548 Y47.738 E.52234 G1 X-25.548 Y47.205 E.0164 G1 X-38.095 Y59.752 E.54554 G1 X-38.629 Y59.752 E.0164 G1 X-25.548 Y46.671 E.56874 G1 X-25.548 Y46.137 E.0164 G1 X-39.163 Y59.752 E.59194 G1 X-39.696 Y59.752 E.0164 G1 X-25.548 Y45.604 E.61514 G1 X-25.548 Y45.07 E.0164 G1 X-40.23 Y59.752 E.63834 G1 X-40.763 Y59.752 E.0164 G1 X-25.548 Y44.537 E.66153 G1 X-25.548 Y44.003 E.0164 G1 X-41.297 Y59.752 E.68473 G1 X-41.83 Y59.752 E.0164 G1 X-25.548 Y43.47 E.70793 G1 X-25.548 Y42.936 E.0164 G1 X-42.225 Y59.613 E.72509 G2 X-42.149 Y59.004 I-2.275 J-.591 E.01892 G1 X-25.548 Y42.402 E.7218 G1 X-25.548 Y41.869 E.0164 G1 X-42.199 Y58.519 E.72394 G2 X-42.312 Y58.1 I-1.652 J.222 E.01341 G1 X-25.548 Y41.335 E.72888 G1 X-25.548 Y40.802 E.0164 G1 X-42.477 Y57.73 E.73604 G2 X-42.685 Y57.405 I-1.341 J.627 E.01191 G1 X-25.548 Y40.268 E.74507 G1 X-25.548 Y39.735 E.0164 G1 X-42.932 Y57.119 E.75583 G2 X-43.221 Y56.874 I-1.168 J1.086 E.01167 G1 X-25.548 Y39.201 E.76839 G1 X-25.548 Y38.668 E.0164 G1 X-43.548 Y56.668 E.78263 G2 X-43.92 Y56.505 I-.802 J1.328 E.01249 G1 X-25.548 Y38.134 E.79877 G1 X-25.548 Y37.752 E.01175 G1 X-25.166 Y37.752 E.01175 G1 X-21.662 Y34.248 E.15234 G1 X-22.196 Y34.248 E.0164 G1 X-44.342 Y56.394 E.96288 G2 X-44.833 Y56.351 I-.593 J3.964 E.01515 G1 X-22.729 Y34.248 E.96102 G1 X-23.263 Y34.248 E.0164 G1 X-45.709 Y56.695 E.97594 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.267 Y58.785 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.022 Y59.54 E.03282 G1 X-48.067 Y59.495 E.00197 G1 X-48.47 Y59.455 E.01246 G1 X-47.105 Y58.091 E.05933 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y59.173 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-23.796 Y34.248 E1.08371 G1 X-24.33 Y34.248 E.0164 G1 X-48.552 Y58.47 E1.05313 G1 X-48.552 Y57.936 E.0164 G1 X-24.864 Y34.248 E1.02993 G1 X-25.397 Y34.248 E.0164 G1 X-42.552 Y51.403 E.74586 G1 X-42.552 Y50.869 E.0164 G1 X-25.548 Y33.865 E.7393 G1 X-25.548 Y33.332 E.0164 G1 X-42.552 Y50.336 E.7393 G1 X-42.552 Y49.802 E.0164 G1 X-25.548 Y32.798 E.7393 G1 X-25.548 Y32.265 E.0164 G1 X-42.552 Y49.269 E.7393 G1 X-42.552 Y48.735 E.0164 G1 X-25.548 Y31.731 E.7393 G1 X-25.548 Y31.198 E.0164 G1 X-42.552 Y48.201 E.7393 G1 X-42.552 Y47.668 E.0164 G1 X-25.548 Y30.664 E.7393 G1 X-25.548 Y30.131 E.0164 G1 X-42.552 Y47.134 E.7393 G1 X-42.552 Y46.601 E.0164 G1 X-25.548 Y29.597 E.7393 G1 X-25.548 Y29.063 E.0164 G1 X-42.552 Y46.067 E.7393 G1 X-42.552 Y45.534 E.0164 G1 X-25.548 Y28.53 E.7393 G1 X-25.548 Y27.996 E.0164 G1 X-42.552 Y45 E.7393 G1 X-42.552 Y44.467 E.0164 M73 P12 R70 G1 X-25.548 Y27.463 E.7393 G1 X-25.548 Y26.929 E.0164 G1 X-42.552 Y43.933 E.7393 G1 X-42.552 Y43.399 E.0164 G1 X-25.548 Y26.396 E.7393 G1 X-25.548 Y25.862 E.0164 G1 X-42.552 Y42.866 E.7393 G1 X-42.552 Y42.332 E.0164 G1 X-25.548 Y25.328 E.7393 G1 X-25.548 Y24.795 E.0164 G1 X-42.722 Y41.968 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.227 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y57.403 E.2315 G1 X-48.552 Y56.869 E.0164 G1 X-43.931 Y52.248 E.20092 G1 X-44.464 Y52.248 E.0164 G1 X-48.552 Y56.336 E.17772 G1 X-48.552 Y55.802 E.0164 G1 X-44.998 Y52.248 E.15452 G1 X-45.531 Y52.248 E.0164 G1 X-48.552 Y55.269 E.13133 G1 X-48.552 Y54.735 E.0164 G1 X-46.065 Y52.248 E.10813 G1 X-46.599 Y52.248 E.0164 G1 X-48.552 Y54.201 E.08493 G1 X-48.552 Y53.668 E.0164 G1 X-47.132 Y52.248 E.06173 G1 X-47.196 Y52.248 E.00197 G1 X-47.613 Y52.665 E.01812 G1 X-47.848 Y52.43 E.01021 G1 X-48.722 Y53.304 E.03799 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-47.848 Y52.43 G1 X-47.613 Y52.665 G1 X-47.307 Y52.359 ;WIPE_END G1 X-44.91 Y45.113 Z.8 F30000 G1 X-30.982 Y3.017 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.178 Y1.214 E.07843 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-30.593 Y2.628 ;WIPE_END G1 X-24.836 Y7.639 Z.8 F30000 G1 X4.778 Y33.418 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y10.245 E1.00755 G1 X27.952 Y9.711 E.0164 G1 X4.948 Y32.715 E1.00017 G1 X4.948 Y32.182 E.0164 G1 X27.952 Y9.178 E1.00017 G1 X27.952 Y8.644 E.0164 G1 X4.948 Y31.648 E1.00017 G1 X4.948 Y31.115 E.0164 G1 X27.952 Y8.111 E1.00017 G1 X27.952 Y7.577 E.0164 G1 X4.948 Y30.581 E1.00017 G1 X4.948 Y30.047 E.0164 G1 X27.952 Y7.044 E1.00017 G1 X27.952 Y6.51 E.0164 G1 X4.948 Y29.514 E1.00017 G1 X4.948 Y28.98 E.0164 G1 X27.952 Y5.977 E1.00017 G1 X27.952 Y5.443 E.0164 G1 X4.948 Y28.447 E1.00017 G1 X4.948 Y27.913 E.0164 G1 X27.952 Y4.909 E1.00017 G1 X27.952 Y4.376 E.0164 G1 X4.948 Y27.38 E1.00017 G1 X4.948 Y26.846 E.0164 G1 X27.952 Y3.842 E1.00017 G1 X27.952 Y3.309 E.0164 G1 X4.948 Y26.312 E1.00017 G1 X4.948 Y25.779 E.0164 G1 X27.952 Y2.775 E1.00017 G1 X27.952 Y2.705 E.00216 G3 X27.098 Y3.095 I-1.669 J-2.522 E.02898 G1 X4.948 Y25.245 E.96306 G1 X4.948 Y24.712 E.0164 G1 X26.447 Y3.212 E.93476 G3 X25.916 Y3.211 I-.257 J-2.7 E.01637 G1 X4.948 Y24.178 E.91164 G1 X4.948 Y23.752 E.01311 G1 X4.841 Y23.752 E.0033 G1 X25.458 Y3.134 E.89642 G3 X25.05 Y3.009 I.432 J-2.136 E.01315 G1 X4.307 Y23.752 E.90186 G1 X3.774 Y23.752 E.0164 G1 X24.68 Y2.844 E.90901 G3 X24.352 Y2.64 I.873 J-1.764 E.01188 G1 X3.24 Y23.752 E.91793 G1 X2.707 Y23.752 E.0164 G1 X24.055 Y2.403 E.92822 G3 X23.789 Y2.136 I1.223 J-1.485 E.01162 G1 X2.173 Y23.752 E.93984 G1 X1.64 Y23.752 E.0164 G1 X23.553 Y1.838 E.95278 G3 X23.35 Y1.508 I4.735 J-3.138 E.01193 G1 X1.106 Y23.752 E.96715 G1 X.572 Y23.752 E.0164 G1 X23.186 Y1.138 E.98323 G3 X23.062 Y.728 I2.016 J-.835 E.01317 G1 X.039 Y23.752 E1.00103 G1 X-.495 Y23.752 E.0164 G1 X22.989 Y.269 E1.02102 G3 X22.988 Y-.265 I2.707 J-.268 E.01642 G1 X-1.028 Y23.752 E1.04421 G1 X-1.562 Y23.752 E.0164 G1 X7.942 Y14.248 E.41321 G1 X7.408 Y14.248 E.0164 G1 X-2.095 Y23.752 E.41321 G1 X-2.629 Y23.752 E.0164 G1 X6.875 Y14.248 E.41321 G1 X6.341 Y14.248 E.0164 G1 X-3.163 Y23.752 E.41321 G1 X-3.696 Y23.752 E.0164 G1 X5.808 Y14.248 E.41321 G1 X5.274 Y14.248 E.0164 G1 X-4.23 Y23.752 E.41321 G1 X-4.763 Y23.752 E.0164 G1 X4.741 Y14.248 E.41321 G1 X4.207 Y14.248 E.0164 G1 X-5.297 Y23.752 E.41321 G1 X-5.83 Y23.752 E.0164 G1 X3.673 Y14.248 E.41321 G1 X3.14 Y14.248 E.0164 G1 X-6.364 Y23.752 E.41321 G1 X-6.898 Y23.752 E.0164 G1 X2.606 Y14.248 E.41321 G1 X2.073 Y14.248 E.0164 G1 X-7.431 Y23.752 E.41321 G1 X-7.965 Y23.752 E.0164 G1 X1.539 Y14.248 E.41321 G1 X1.006 Y14.248 E.0164 G1 X-8.498 Y23.752 E.41321 G1 X-9.032 Y23.752 E.0164 G1 X.472 Y14.248 E.41321 G1 X-.062 Y14.248 E.0164 G1 X-9.565 Y23.752 E.41321 G1 X-10.099 Y23.752 E.0164 G1 X-.595 Y14.248 E.41321 G1 X-1.129 Y14.248 E.0164 G1 X-10.632 Y23.752 E.41321 G1 X-11.166 Y23.752 E.0164 G1 X-1.662 Y14.248 E.41321 G1 X-2.196 Y14.248 E.0164 G1 X-11.7 Y23.752 E.41321 G1 X-12.233 Y23.752 E.0164 G1 X-2.729 Y14.248 E.41321 G1 X-3.263 Y14.248 E.0164 G1 X-12.767 Y23.752 E.41321 G1 X-13.3 Y23.752 E.0164 G1 X-3.796 Y14.248 E.41321 G1 X-4.33 Y14.248 E.0164 G1 X-13.834 Y23.752 E.41321 G1 X-14.367 Y23.752 E.0164 G1 X-4.548 Y13.933 E.42693 G1 X-4.548 Y13.399 E.0164 G1 X-14.901 Y23.752 E.45013 G1 X-15.435 Y23.752 E.0164 G1 X-4.548 Y12.865 E.47333 G1 X-4.548 Y12.332 E.0164 G1 X-15.968 Y23.752 E.49652 G1 X-16.502 Y23.752 E.0164 G1 X-4.548 Y11.798 E.51972 G1 X-4.548 Y11.265 E.0164 G1 X-17.035 Y23.752 E.54292 G1 X-17.569 Y23.752 E.0164 G1 X-4.548 Y10.731 E.56612 G1 X-4.548 Y10.198 E.0164 G1 X-18.102 Y23.752 E.58932 G1 X-18.636 Y23.752 E.0164 G1 X-4.548 Y9.664 E.61252 G1 X-4.548 Y9.131 E.0164 G1 X-19.169 Y23.752 E.63572 G1 X-19.703 Y23.752 E.0164 G1 X-4.548 Y8.597 E.65891 G1 X-4.548 Y8.063 E.0164 G1 X-20.237 Y23.752 E.68211 G1 X-20.77 Y23.752 E.0164 G1 X-4.548 Y7.53 E.70531 G1 X-4.548 Y6.996 E.0164 G1 X-21.304 Y23.752 E.72851 G1 X-21.837 Y23.752 E.0164 G1 X-4.548 Y6.463 E.75171 G1 X-4.548 Y5.929 E.0164 G1 X-22.371 Y23.752 E.77491 G1 X-22.904 Y23.752 E.0164 G1 X-4.548 Y5.396 E.79811 G1 X-4.548 Y4.862 E.0164 G1 X-23.438 Y23.752 E.8213 G1 X-23.972 Y23.752 E.0164 G1 X-4.548 Y4.328 E.8445 G1 X-4.548 Y3.795 E.0164 G1 X-24.675 Y23.922 E.87508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y41.435 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.548 Y24.261 E.74668 G1 X-25.548 Y23.752 E.01566 G1 X-25.039 Y23.752 E.01566 G1 X-4.548 Y3.261 E.8909 G1 X-4.548 Y2.728 E.0164 G1 X-42.552 Y40.732 E1.65235 G1 X-42.552 Y40.198 E.0164 G1 X-16.602 Y14.248 E1.12827 G1 X-17.136 Y14.248 E.0164 G1 X-42.552 Y39.664 E1.10507 G1 X-42.552 Y39.131 E.0164 G1 X-17.669 Y14.248 E1.08187 G1 X-18.203 Y14.248 E.0164 G1 X-42.552 Y38.597 E1.05867 G1 X-42.552 Y38.064 E.0164 G1 X-18.736 Y14.248 E1.03547 G1 X-19.27 Y14.248 E.0164 G1 X-42.774 Y37.752 E1.02191 G1 X-43.307 Y37.752 E.0164 G1 X-19.803 Y14.248 E1.02191 G1 X-20.337 Y14.248 E.0164 G1 X-43.841 Y37.752 E1.02191 G1 X-44.374 Y37.752 E.0164 G1 X-20.87 Y14.248 E1.02191 G1 X-21.404 Y14.248 E.0164 G1 X-44.908 Y37.752 E1.02191 G1 X-45.441 Y37.752 E.0164 G1 X-21.938 Y14.248 E1.02191 G1 X-22.471 Y14.248 E.0164 G1 X-45.975 Y37.752 E1.02191 G1 X-46.509 Y37.752 E.0164 G1 X-23.005 Y14.248 E1.02191 G1 X-23.538 Y14.248 E.0164 G1 X-47.042 Y37.752 E1.02191 G1 X-47.576 Y37.752 E.0164 G1 X-24.072 Y14.248 E1.02191 G1 X-24.605 Y14.248 E.0164 G1 X-47.906 Y37.548 E1.01306 G1 X-48.439 Y37.548 E.0164 G1 X-43.139 Y32.248 E.23045 G1 X-43.673 Y32.248 E.0164 G1 X-48.552 Y37.127 E.21215 G1 X-48.552 Y36.594 E.0164 G1 X-44.206 Y32.248 E.18895 G1 X-44.74 Y32.248 E.0164 G1 X-48.552 Y36.06 E.16575 G1 X-48.552 Y35.527 E.0164 G1 X-45.273 Y32.248 E.14255 G1 X-45.807 Y32.248 E.0164 G1 X-48.552 Y34.993 E.11935 G1 X-48.552 Y34.46 E.0164 G1 X-46.34 Y32.248 E.09615 G1 X-46.874 Y32.248 E.0164 G1 X-48.552 Y33.926 E.07295 G1 X-48.552 Y33.392 E.0164 G1 X-47.408 Y32.248 E.04976 G1 X-47.838 Y32.248 E.01324 G1 X-47.838 Y32.452 E.00626 G1 X-48.145 Y32.452 E.00942 G1 X-48.722 Y33.029 E.02509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y31.831 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.139 Y14.248 E.76447 G1 X-25.673 Y14.248 E.0164 G1 X-42.552 Y31.127 E.73389 G1 X-42.552 Y30.594 E.0164 G1 X-26.206 Y14.248 E.71069 G1 X-26.74 Y14.248 E.0164 G1 X-42.552 Y30.06 E.68749 G1 X-42.552 Y29.527 E.0164 G1 X-27.273 Y14.248 E.66429 G1 X-27.807 Y14.248 E.0164 G1 X-42.552 Y28.993 E.6411 G1 X-42.552 Y28.46 E.0164 G1 X-28.34 Y14.248 E.6179 G1 X-28.874 Y14.248 E.0164 G1 X-42.552 Y27.926 E.5947 G1 X-42.552 Y27.392 E.0164 G1 X-29.348 Y14.189 E.57408 G1 X-29.348 Y13.655 E.0164 G1 X-42.552 Y26.859 E.57408 G1 X-42.552 Y26.325 E.0164 G1 X-29.348 Y13.122 E.57408 G1 X-29.348 Y12.588 E.0164 G1 X-42.552 Y25.792 E.57408 G1 X-42.552 Y25.258 E.0164 G1 X-29.348 Y12.054 E.57408 G1 X-29.348 Y11.521 E.0164 G1 X-42.552 Y24.725 E.57408 G1 X-42.552 Y24.191 E.0164 G1 X-29.348 Y10.987 E.57408 G1 X-29.348 Y10.454 E.0164 G1 X-42.552 Y23.658 E.57408 G1 X-42.552 Y23.124 E.0164 G1 X-29.348 Y9.92 E.57408 G1 X-29.348 Y9.387 E.0164 G1 X-42.552 Y22.59 E.57408 G1 X-42.552 Y22.057 E.0164 G1 X-29.348 Y8.853 E.57408 G1 X-29.348 Y8.32 E.0164 G1 X-42.552 Y21.523 E.57408 G1 X-42.552 Y20.99 E.0164 G1 X-29.476 Y7.914 E.56854 G3 X-30.136 Y8.04 I-.826 J-2.524 E.02072 G1 X-42.552 Y20.456 E.53984 G1 X-42.552 Y19.923 E.0164 G1 X-30.655 Y8.026 E.51724 G3 X-31.087 Y7.924 I.21 J-1.856 E.01367 G1 X-42.552 Y19.389 E.49847 G1 X-42.552 Y18.855 E.0164 G1 X-31.469 Y7.773 E.48186 G3 X-31.805 Y7.575 I.581 J-1.376 E.01202 G1 X-42.552 Y18.322 E.46724 G1 X-42.552 Y17.788 E.0164 G1 X-32.102 Y7.338 E.45436 G3 X-32.36 Y7.063 I.917 J-1.119 E.01164 G1 X-43.049 Y17.752 E.46475 G1 X-43.583 Y17.752 E.0164 G1 X-32.58 Y6.749 E.47839 G3 X-32.757 Y6.392 I5.155 J-2.776 E.01224 G1 X-44.116 Y17.752 E.4939 G1 X-44.65 Y17.752 E.0164 G1 X-32.881 Y5.983 E.51169 G3 X-32.943 Y5.512 I1.758 J-.473 E.01465 G1 X-45.183 Y17.752 E.53217 G1 X-45.717 Y17.752 E.0164 G1 X-32.683 Y4.718 E.56671 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-46.25 Y17.752 E.74226 G1 X-46.784 Y17.752 E.0164 G1 X-29.348 Y.316 E.75809 G1 X-29.348 Y-.217 E.0164 G1 X-47.317 Y17.752 E.78128 G1 X-47.838 Y17.752 E.01601 G1 X-29.348 Y-.751 E.8042 G1 X-29.348 Y-1.285 E.0164 G1 X-48.351 Y17.718 E.82621 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y13.868 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.548 Y2.194 E.50755 G1 X-4.548 Y1.661 E.0164 G1 X-16.052 Y13.164 E.50017 G1 X-16.052 Y12.631 E.0164 G1 X-4.548 Y1.127 E.50017 G1 X-4.548 Y.594 E.0164 G1 X-16.052 Y12.097 E.50017 G1 X-16.052 Y11.564 E.0164 G1 X-4.548 Y.06 E.50017 G1 X-4.548 Y-.474 E.0164 G1 X-16.052 Y11.03 E.50017 G1 X-16.052 Y10.497 E.0164 G1 X-4.548 Y-1.007 E.50017 G1 X-4.548 Y-1.541 E.0164 G1 X-16.222 Y10.133 E.50755 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.807 Y8.719 ;WIPE_END G1 X-7.337 Y10.282 Z.8 F30000 G1 X8.578 Y13.612 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X23.395 Y-1.205 E.64419 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.74 Y-3.016 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.458 Y-4.734 E.07471 G1 X26.924 Y-4.734 E.0164 G1 X24.995 Y-2.805 E.08387 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.561 Y-4.904 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X8.748 Y12.908 E.77446 G1 X8.748 Y12.375 E.0164 G1 X25.857 Y-4.734 E.74388 G1 X25.324 Y-4.734 E.0164 G1 X8.748 Y11.841 E.72068 G1 X8.748 Y11.308 E.0164 G1 X24.79 Y-4.734 E.69749 G1 X24.257 Y-4.734 E.0164 G1 X8.748 Y10.774 E.67429 G1 X8.748 Y10.241 E.0164 G1 X23.723 Y-4.734 E.65109 G1 X23.189 Y-4.734 E.0164 G1 X12.205 Y6.25 E.4776 G3 X10.55 Y7.905 I-2.474 J-.82 E.07459 G1 X8.748 Y9.707 E.07836 G1 X8.748 Y9.173 E.0164 G1 X9.883 Y8.039 E.04933 G3 X9.359 Y8.028 I-.222 J-1.992 E.01614 G1 X8.578 Y8.81 E.03396 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.15 Y5.771 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X22.656 Y-4.734 E.45678 G1 X22.122 Y-4.734 E.0164 G1 X12.328 Y5.059 E.42582 G2 X12.23 Y4.624 I-4.381 J.762 E.01372 G1 X21.589 Y-4.734 E.4069 G1 X21.055 Y-4.734 E.0164 G1 X12.078 Y4.242 E.3903 G2 X11.882 Y3.905 I-1.38 J.576 E.01203 G1 X20.522 Y-4.734 E.37563 G1 X19.988 Y-4.734 E.0164 G1 X11.646 Y3.608 E.36269 G2 X11.372 Y3.348 I-1.122 J.912 E.01164 G1 X19.462 Y-4.742 E.35173 G2 X18.952 Y-4.752 I-.345 J4.413 E.01568 G1 X18.952 Y-4.765 E.00041 G1 X11.059 Y3.127 E.34315 G2 X10.705 Y2.948 I-2.982 J5.455 E.01221 G1 X18.934 Y-5.281 E.3578 G1 X18.934 Y-5.815 E.0164 G1 X10.298 Y2.822 E.37552 G2 X9.827 Y2.759 I-.454 J1.606 E.01465 G1 X18.934 Y-6.348 E.39598 G1 X18.934 Y-6.882 E.0164 G1 X9.262 Y2.79 E.42053 G2 X8.748 Y2.93 I.273 J2.022 E.01642 G1 X8.748 Y2.771 E.00489 G1 X18.934 Y-7.416 E.44289 G1 X18.934 Y-7.949 E.0164 G1 X8.748 Y2.237 E.44289 G1 X8.748 Y1.704 E.0164 G1 X18.934 Y-8.483 E.44289 G1 X18.934 Y-9.016 E.0164 G1 X8.748 Y1.17 E.44289 G1 X8.748 Y.636 E.0164 G1 X18.934 Y-9.55 E.44289 G1 X18.934 Y-10.083 E.0164 G1 X8.748 Y.103 E.44289 G1 X8.748 Y-.431 E.0164 G1 X18.934 Y-10.617 E.44289 G1 X18.934 Y-11.151 E.0164 G1 X8.748 Y-.964 E.44289 G1 X8.748 Y-1.498 E.0164 G1 X18.934 Y-11.684 E.44289 G1 X18.934 Y-12.218 E.0164 G1 X8.748 Y-2.031 E.44289 G1 X8.748 Y-2.248 E.00666 G1 X8.431 Y-2.248 E.00974 G1 X18.934 Y-12.751 E.45666 G1 X18.934 Y-13.285 E.0164 G1 X7.898 Y-2.248 E.47986 G1 X7.364 Y-2.248 E.0164 G1 X18.934 Y-13.818 E.50306 G1 X18.934 Y-14.352 E.0164 G1 X6.831 Y-2.248 E.52626 G1 X6.297 Y-2.248 E.0164 G1 X18.934 Y-14.886 E.54946 G1 X18.934 Y-15.419 E.0164 G1 X5.763 Y-2.248 E.57266 G1 X5.23 Y-2.248 E.0164 G1 X18.934 Y-15.953 E.59585 G1 X18.934 Y-16.486 E.0164 G1 X4.696 Y-2.248 E.61905 G1 X4.163 Y-2.248 E.0164 G1 X18.934 Y-17.02 E.64225 G1 X18.934 Y-17.553 E.0164 G1 X3.629 Y-2.248 E.66545 G1 X3.096 Y-2.248 E.0164 G1 X18.934 Y-18.087 E.68865 G1 X18.934 Y-18.62 E.0164 G1 X2.562 Y-2.248 E.71185 G1 X2.028 Y-2.248 E.0164 G1 X18.934 Y-19.154 E.73505 G1 X18.934 Y-19.688 E.0164 G1 X1.495 Y-2.248 E.75824 G1 X.961 Y-2.248 E.0164 G1 X18.934 Y-20.221 E.78144 G1 X18.934 Y-20.755 E.0164 G1 X.428 Y-2.248 E.80464 G1 X-.106 Y-2.248 E.0164 G1 X18.934 Y-21.288 E.82784 G1 X18.934 Y-21.822 E.0164 G1 X-.639 Y-2.248 E.85104 G1 X-1.173 Y-2.248 E.0164 G1 X18.934 Y-22.355 E.87424 G1 X18.934 Y-22.889 E.0164 G1 X-1.706 Y-2.248 E.89744 G1 X-2.24 Y-2.248 E.0164 G1 X18.934 Y-23.423 E.92063 G1 X18.934 Y-23.956 E.0164 G1 X-2.774 Y-2.248 E.94383 G1 X-3.307 Y-2.248 E.0164 G1 X18.934 Y-24.49 E.96703 G1 X18.934 Y-25.023 E.0164 G1 X-4.01 Y-2.078 E.99761 M73 P13 R70 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y9.599 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X18.934 Y-25.557 E1.52853 G1 X18.934 Y-26.09 E.0164 G1 X-16.052 Y8.896 E1.52116 G1 X-16.052 Y8.362 E.0164 G1 X18.934 Y-26.624 E1.52116 G1 X18.934 Y-27.157 E.0164 G1 X-16.052 Y7.829 E1.52116 G1 X-16.052 Y7.295 E.0164 G1 X18.934 Y-27.691 E1.52116 G1 X18.934 Y-28.225 E.0164 G1 X-16.052 Y6.762 E1.52116 G1 X-16.052 Y6.228 E.0164 G1 X18.934 Y-28.758 E1.52116 G1 X18.934 Y-29.292 E.0164 G1 X-16.052 Y5.695 E1.52116 G1 X-16.052 Y5.161 E.0164 G1 X18.934 Y-29.825 E1.52116 G1 X18.934 Y-30.359 E.0164 G1 X-16.052 Y4.627 E1.52116 G1 X-16.052 Y4.094 E.0164 G1 X18.934 Y-30.892 E1.52116 G1 X18.934 Y-31.426 E.0164 G1 X-16.052 Y3.56 E1.52116 G1 X-16.052 Y3.027 E.0164 G1 X18.934 Y-31.96 E1.52116 G1 X18.934 Y-32.493 E.0164 G1 X-16.052 Y2.493 E1.52116 G1 X-16.052 Y1.96 E.0164 G1 X18.934 Y-33.027 E1.52116 G1 X18.934 Y-33.56 E.0164 G1 X-16.052 Y1.426 E1.52116 G1 X-16.052 Y.893 E.0164 G1 X18.934 Y-34.094 E1.52116 G1 X18.934 Y-34.627 E.0164 G1 X-16.052 Y.359 E1.52116 G1 X-16.052 Y-.175 E.0164 G1 X18.934 Y-35.161 E1.52116 G1 X18.934 Y-35.694 E.0164 G1 X-16.052 Y-.708 E1.52116 G1 X-16.052 Y-1.242 E.0164 G1 X18.934 Y-36.228 E1.52116 G1 X18.934 Y-36.762 E.0164 G1 X-16.052 Y-1.775 E1.52116 G1 X-16.052 Y-2.248 E.01454 G1 X-16.113 Y-2.248 E.00187 G1 X18.934 Y-37.295 E1.5238 G1 X18.934 Y-37.829 E.0164 G1 X-16.646 Y-2.248 E1.547 G1 X-17.18 Y-2.248 E.0164 G1 X18.934 Y-38.362 E1.57019 G1 X18.934 Y-38.896 E.0164 G1 X-17.713 Y-2.248 E1.59339 G1 X-18.247 Y-2.248 E.0164 G1 X18.934 Y-39.429 E1.61659 G1 X18.934 Y-39.963 E.0164 G1 X-18.78 Y-2.248 E1.63979 G1 X-19.314 Y-2.248 E.0164 G1 X18.934 Y-40.497 E1.66299 G1 X18.934 Y-41.03 E.0164 G1 X-19.848 Y-2.248 E1.68619 G1 X-20.381 Y-2.248 E.0164 G1 X18.934 Y-41.564 E1.70939 G1 X18.934 Y-42.097 E.0164 G1 X-20.915 Y-2.248 E1.73258 G1 X-21.448 Y-2.248 E.0164 G1 X18.934 Y-42.631 E1.75578 G1 X18.934 Y-43.164 E.0164 G1 X-21.982 Y-2.248 E1.77898 G1 X-22.515 Y-2.248 E.0164 G1 X18.934 Y-43.698 E1.80218 G1 X18.934 Y-44.231 E.0164 G1 X-23.049 Y-2.248 E1.82538 G1 X-23.583 Y-2.248 E.0164 G1 X18.934 Y-44.765 E1.84858 G1 X18.934 Y-45.299 E.0164 G1 X-24.116 Y-2.248 E1.87178 G1 X-24.65 Y-2.248 E.0164 G1 X18.934 Y-45.832 E1.89497 G1 X18.934 Y-46.366 E.0164 G1 X-25.183 Y-2.248 E1.91817 G1 X-25.717 Y-2.248 E.0164 G1 X18.934 Y-46.899 E1.94137 G1 X18.934 Y-47.433 E.0164 G1 X-26.25 Y-2.248 E1.96457 G1 X-26.784 Y-2.248 E.0164 G1 X18.934 Y-47.966 E1.98777 G1 X18.934 Y-48.5 E.0164 G1 X-27.317 Y-2.248 E2.01097 G1 X-27.851 Y-2.248 E.0164 G1 X18.934 Y-49.034 E2.03417 G1 X18.934 Y-49.567 E.0164 G1 X-28.554 Y-2.078 E2.06474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y17.555 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.348 Y-1.818 E.84233 G1 X-29.348 Y-2.248 E.01322 G1 X-28.918 Y-2.248 E.01322 G1 X18.934 Y-50.101 E2.08056 G1 X18.934 Y-50.634 E.0164 G1 X-48.552 Y16.852 E2.93421 G1 X-48.552 Y16.318 E.0164 G1 X18.934 Y-51.168 E2.93421 G1 X18.934 Y-51.701 E.0164 G1 X-48.722 Y15.955 E2.94159 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-47.307 Y14.54 ;WIPE_END G1 X-41.561 Y9.518 Z.8 F30000 G1 X28.933 Y-52.096 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X30.952 Y-54.115 E.08777 G1 X30.952 Y-54.648 E.0164 G1 X28.569 Y-52.266 E.1036 G1 X28.036 Y-52.266 E.0164 G1 X30.952 Y-55.182 E.12679 G1 X30.952 Y-55.715 E.0164 G1 X27.502 Y-52.266 E.14999 G1 X26.969 Y-52.266 E.0164 G1 X30.952 Y-56.249 E.17319 G1 X30.952 Y-56.783 E.0164 G1 X26.435 Y-52.266 E.19639 G1 X25.901 Y-52.266 E.0164 G1 X30.952 Y-57.316 E.21959 G1 X30.952 Y-57.85 E.0164 G1 X25.368 Y-52.266 E.24279 G1 X24.834 Y-52.266 E.0164 G1 X30.952 Y-58.383 E.26599 G1 X30.952 Y-58.917 E.0164 G1 X24.301 Y-52.266 E.28918 G1 X23.767 Y-52.266 E.0164 G1 X30.952 Y-59.45 E.31238 G1 X30.952 Y-59.752 E.00927 G1 X30.72 Y-59.752 E.00713 G1 X23.234 Y-52.266 E.32549 G1 X22.7 Y-52.266 E.0164 G1 X30.186 Y-59.752 E.32549 G1 X29.653 Y-59.752 E.0164 G1 X22.166 Y-52.266 E.32549 G1 X21.633 Y-52.266 E.0164 G1 X29.119 Y-59.752 E.32549 G1 X28.586 Y-59.752 E.0164 G1 X21.099 Y-52.266 E.32549 G1 X20.566 Y-52.266 E.0164 G1 X28.052 Y-59.752 E.32549 G1 X27.519 Y-59.752 E.0164 G1 X20.032 Y-52.266 E.32549 G1 X19.499 Y-52.266 E.0164 G1 X26.985 Y-59.752 E.32549 G1 X26.451 Y-59.752 E.0164 G1 X-48.552 Y15.251 E3.26104 G1 X-48.552 Y14.718 E.0164 G1 X25.918 Y-59.752 E3.23784 G1 X25.384 Y-59.752 E.0164 G1 X-48.552 Y14.184 E3.21464 G1 X-48.552 Y13.651 E.0164 G1 X24.851 Y-59.752 E3.19144 G1 X24.317 Y-59.752 E.0164 G1 X-48.552 Y13.117 E3.16824 G1 X-48.552 Y12.584 E.0164 G1 X23.784 Y-59.752 E3.14505 G1 X23.25 Y-59.752 E.0164 G1 X-15.7 Y-20.802 E1.69348 G2 X-15.655 Y-21.38 I-2.732 J-.501 E.01786 G1 X22.716 Y-59.752 E1.66835 G1 X22.183 Y-59.752 E.0164 G1 X-15.716 Y-21.853 E1.64777 G2 X-15.838 Y-22.264 I-1.622 J.26 E.01322 G1 X21.649 Y-59.752 E1.6299 G1 X21.116 Y-59.752 E.0164 G1 X14.948 Y-53.584 E.26816 G1 X14.948 Y-54.118 E.0164 G1 X20.582 Y-59.752 E.24496 G1 X20.049 Y-59.752 E.0164 G1 X14.948 Y-54.651 E.22176 G1 X14.948 Y-55.185 E.0164 G1 X19.515 Y-59.752 E.19856 G1 X18.981 Y-59.752 E.0164 G1 X14.948 Y-55.719 E.17537 G1 X14.948 Y-56.252 E.0164 G1 X18.448 Y-59.752 E.15217 G1 X17.914 Y-59.752 E.0164 G1 X14.948 Y-56.786 E.12897 G1 X14.948 Y-57.319 E.0164 G1 X17.381 Y-59.752 E.10577 G1 X16.847 Y-59.752 E.0164 G1 X14.948 Y-57.853 E.08257 G1 X14.948 Y-58.386 E.0164 G1 X16.314 Y-59.752 E.05937 G1 X15.78 Y-59.752 E.0164 G1 X14.948 Y-58.92 E.03617 G1 X14.948 Y-59.453 E.0164 G1 X15.416 Y-59.922 E.02035 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.285 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-16.013 Y-22.623 E1.31733 G2 X-16.23 Y-22.94 I-4.054 J2.553 E.0118 G1 X13.582 Y-52.752 E1.2962 G1 X13.049 Y-52.752 E.0164 G1 X-16.487 Y-23.216 E1.28417 G2 X-16.782 Y-23.455 I-1.054 J1 E.0117 G1 X12.515 Y-52.752 E1.27379 G1 X11.981 Y-52.752 E.0164 G1 X-17.117 Y-23.654 E1.26515 G2 X-17.496 Y-23.808 I-.777 J1.362 E.01262 G1 X11.448 Y-52.752 E1.25842 G1 X10.914 Y-52.752 E.0164 G1 X-17.927 Y-23.911 E1.25397 G2 X-18.442 Y-23.93 I-.393 J3.698 E.01585 G1 X10.55 Y-52.922 E1.26053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.585 Y-18.916 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y12.05 E1.34638 G1 X-48.552 Y11.516 E.0164 G1 X-18.392 Y-18.643 E1.3113 G3 X-18.865 Y-18.704 I-.008 J-1.828 E.01471 G1 X-48.552 Y10.983 E1.29073 G1 X-48.552 Y10.449 E.0164 G1 X-19.277 Y-18.826 E1.27284 G3 X-19.636 Y-19 I2.614 J-5.857 E.01228 G1 X-48.552 Y9.916 E1.25721 G1 X-48.552 Y9.382 E.0164 G1 X-19.951 Y-19.218 E1.24351 G3 X-20.228 Y-19.475 I.837 J-1.179 E.01164 G1 X-48.552 Y8.849 E1.23147 G1 X-48.552 Y8.315 E.0164 G1 X-20.467 Y-19.77 E1.2211 G3 X-20.665 Y-20.106 I1.304 J-.995 E.01201 G1 X-48.552 Y7.781 E1.21249 G1 X-48.552 Y7.248 E.0164 G1 X-20.82 Y-20.484 E1.20573 G3 X-20.923 Y-20.915 I1.586 J-.604 E.01366 G1 X-48.552 Y6.714 E1.20128 G1 X-48.552 Y6.181 E.0164 G1 X-20.76 Y-21.612 E1.20837 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.78 Y2.876 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y5.647 E.12051 G1 X-48.552 Y5.114 E.0164 G1 X-46.656 Y3.218 E.08244 G3 X-47.173 Y3.201 I-.143 J-3.549 E.01591 G1 X-48.552 Y4.58 E.05997 G1 X-48.552 Y4.047 E.0164 G1 X-47.62 Y3.115 E.04051 G3 X-48.022 Y2.983 I.466 J-2.108 E.01303 G1 X-48.722 Y3.683 E.0304 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.924 Y1.02 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.822 Y-22.083 E1.00447 G3 X-19.092 Y-23.813 I2.491 J.761 E.07828 G1 X9.847 Y-52.752 E1.25824 G1 X9.314 Y-52.752 E.0164 G1 X-43.582 Y.144 E2.29985 G2 X-43.599 Y-.373 I-3.548 J-.143 E.01591 G1 X8.78 Y-52.752 E2.27738 G1 X8.247 Y-52.752 E.0164 G1 X-43.685 Y-.82 E2.25792 G2 X-43.817 Y-1.222 I-2.107 J.466 E.01303 G1 X-40.287 Y-4.752 E.15346 G1 X-40.821 Y-4.752 E.0164 G1 X-43.992 Y-1.58 E.1379 G2 X-44.202 Y-1.904 I-1.748 J.904 E.01188 G1 X-41.184 Y-4.922 E.13121 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-5.317 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X7.713 Y-52.752 E2.06239 G1 X7.179 Y-52.752 E.0164 G1 X-39.552 Y-6.021 E2.03181 G1 X-39.552 Y-6.554 E.0164 G1 X6.646 Y-52.752 E2.00861 G1 X6.452 Y-52.752 E.00596 G1 X6.452 Y-53.091 E.01044 G1 X-39.552 Y-7.088 E2.00018 G1 X-39.552 Y-7.621 E.0164 G1 X6.452 Y-53.625 E2.00018 G1 X6.452 Y-54.159 E.0164 G1 X-39.552 Y-8.155 E2.00018 G1 X-39.552 Y-8.688 E.0164 G1 X6.452 Y-54.692 E2.00018 G1 X6.452 Y-55.226 E.0164 G1 X-39.552 Y-9.222 E2.00018 G1 X-39.552 Y-9.756 E.0164 G1 X6.452 Y-55.759 E2.00018 G1 X6.452 Y-56.293 E.0164 G1 X-39.552 Y-10.289 E2.00018 G1 X-39.552 Y-10.823 E.0164 M73 P13 R69 G1 X6.452 Y-56.826 E2.00018 G1 X6.452 Y-57.36 E.0164 G1 X-39.552 Y-11.356 E2.00018 G1 X-39.552 Y-11.89 E.0164 G1 X6.452 Y-57.894 E2.00018 G1 X6.452 Y-58.427 E.0164 G1 X-39.552 Y-12.423 E2.00018 G1 X-39.552 Y-12.957 E.0164 G1 X6.452 Y-58.961 E2.00018 G1 X6.452 Y-59.494 E.0164 G1 X-39.552 Y-13.49 E2.00018 G1 X-39.552 Y-14.024 E.0164 G1 X6.176 Y-59.752 E1.98818 G1 X5.642 Y-59.752 E.0164 G1 X-15.866 Y-38.244 E.93515 G3 X-17.257 Y-36.852 I-2.439 J-1.048 E.06197 G1 X-33.448 Y-20.662 E.70395 G2 X-33.376 Y-21.267 I-2.265 J-.578 E.01881 G1 X-17.985 Y-36.658 E.66916 G3 X-18.525 Y-36.652 I-.292 J-2.045 E.01663 G1 X-33.417 Y-21.76 E.6475 G2 X-33.522 Y-22.188 I-1.679 J.185 E.0136 G1 X-18.981 Y-36.729 E.63224 G3 X-19.375 Y-36.869 I.289 J-1.44 E.01289 G1 X-33.676 Y-22.568 E.62179 G2 X-33.87 Y-22.907 I-1.385 J.569 E.01205 G1 X-19.721 Y-37.056 E.6152 G3 X-20.027 Y-37.284 I.713 J-1.275 E.01176 G1 X-34.102 Y-23.209 E.61196 G2 X-34.368 Y-23.477 I-1.149 J.877 E.01163 G1 X-20.294 Y-37.55 E.6119 G3 X-20.523 Y-37.855 I1.041 J-1.023 E.01175 G1 X-34.669 Y-23.709 E.61502 G2 X-35.006 Y-23.905 I-.913 J1.184 E.01204 G1 X-20.712 Y-38.199 E.62148 G3 X-20.856 Y-38.589 I1.284 J-.695 E.01282 G1 X-35.385 Y-24.06 E.63168 G2 X-35.811 Y-24.168 I-.62 J1.566 E.01356 G1 X-20.935 Y-39.044 E.6468 G3 X-20.932 Y-39.581 I2.04 J-.256 E.01655 G1 X-36.48 Y-24.032 E.67603 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-35.066 Y-25.446 ;WIPE_END G1 X-35.43 Y-18.679 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.552 Y-14.558 E.17921 G1 X-39.552 Y-15.091 E.0164 G1 X-36.097 Y-18.546 E.1502 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.881 Y-38.762 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X5.109 Y-59.752 E.91259 G1 X4.575 Y-59.752 E.0164 G1 X-15.664 Y-39.513 E.87997 G2 X-15.739 Y-39.971 I-1.779 J.056 E.01433 G1 X4.042 Y-59.752 E.86004 G1 X3.508 Y-59.752 E.0164 G1 X-15.881 Y-40.363 E.84301 G2 X-16.068 Y-40.709 I-1.408 J.539 E.01214 G1 X2.975 Y-59.752 E.82796 G1 X2.441 Y-59.752 E.0164 G1 X-16.296 Y-41.015 E.81466 G2 X-16.562 Y-41.282 I-1.149 J.877 E.01163 G1 X1.907 Y-59.752 E.80304 G1 X1.374 Y-59.752 E.0164 G1 X-16.866 Y-41.511 E.79307 G2 X-17.211 Y-41.7 I-.89 J1.215 E.01212 G1 X.84 Y-59.752 E.78485 G1 X.307 Y-59.752 E.0164 G1 X-17.601 Y-41.844 E.7786 G2 X-18.056 Y-41.923 I-.891 J3.805 E.0142 G1 X-.227 Y-59.752 E.77519 G1 X-.76 Y-59.752 E.0164 G1 X-18.8 Y-41.713 E.78432 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.124 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.321 Y-41.735 E.79097 G2 X-20.753 Y-40.292 I1.081 J2.505 E.06403 G1 X-36.9 Y-24.145 E.70205 G2 X-37.737 Y-23.835 I.649 J3.028 E.02753 G1 X-1.827 Y-59.752 E1.56146 G1 X-2.361 Y-59.752 E.0164 G1 X-39.478 Y-22.635 E1.61378 G1 X-39.552 Y-22.648 E.00231 G1 X-39.552 Y-23.095 E.01374 G1 X-2.895 Y-59.752 E1.59381 G1 X-3.428 Y-59.752 E.0164 G1 X-39.552 Y-23.628 E1.57061 G1 X-39.552 Y-24.162 E.0164 G1 X-3.962 Y-59.752 E1.54741 G1 X-4.495 Y-59.752 E.0164 G1 X-39.552 Y-24.695 E1.52421 G1 X-39.552 Y-25.229 E.0164 G1 X-5.029 Y-59.752 E1.50101 G1 X-5.562 Y-59.752 E.0164 G1 X-39.552 Y-25.762 E1.47782 G1 X-39.552 Y-26.296 E.0164 G1 X-6.096 Y-59.752 E1.45462 G1 X-6.63 Y-59.752 E.0164 G1 X-39.552 Y-26.83 E1.43142 G1 X-39.552 Y-27.363 E.0164 G1 X-7.163 Y-59.752 E1.40822 G1 X-7.697 Y-59.752 E.0164 G1 X-39.552 Y-27.897 E1.38502 G1 X-39.552 Y-28.43 E.0164 G1 X-8.23 Y-59.752 E1.36182 G1 X-8.764 Y-59.752 E.0164 G1 X-39.552 Y-28.964 E1.33862 G1 X-39.552 Y-29.497 E.0164 G1 X-9.297 Y-59.752 E1.31543 G1 X-9.831 Y-59.752 E.0164 G1 X-39.552 Y-30.031 E1.29223 G1 X-39.552 Y-30.564 E.0164 G1 X-10.364 Y-59.752 E1.26903 G1 X-10.898 Y-59.752 E.0164 G1 X-39.552 Y-31.098 E1.24583 G1 X-39.552 Y-31.632 E.0164 G1 X-11.432 Y-59.752 E1.22263 G1 X-11.965 Y-59.752 E.0164 G1 X-33.644 Y-38.073 E.94256 G3 X-35.085 Y-36.632 I-2.593 J-1.151 E.06409 G1 X-39.552 Y-32.165 E.19421 G1 X-39.552 Y-32.699 E.0164 G1 X-35.85 Y-36.401 E.16097 G3 X-36.414 Y-36.37 I-.467 J-3.339 E.01741 G1 X-39.722 Y-33.063 E.14379 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.637 Y-38.613 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-12.499 Y-59.752 E.91907 G1 X-13.032 Y-59.752 E.0164 G1 X-33.382 Y-39.402 E.88476 G2 X-33.44 Y-39.877 I-1.833 J-.014 E.01475 G1 X-13.566 Y-59.752 E.86412 G1 X-14.099 Y-59.752 E.0164 G1 X-33.558 Y-40.293 E.84604 G2 X-33.723 Y-40.662 I-1.484 J.44 E.01246 G1 X-14.633 Y-59.752 E.82999 G1 X-15.167 Y-59.752 E.0164 G1 X-33.927 Y-40.992 E.81568 G2 X-34.168 Y-41.284 I-1.233 J.768 E.01169 G1 X-15.7 Y-59.752 E.80294 G1 X-16.234 Y-59.752 E.0164 G1 X-34.443 Y-41.543 E.79171 G2 X-34.753 Y-41.766 I-1.003 J1.067 E.01179 G1 X-16.767 Y-59.752 E.78201 G1 X-17.301 Y-59.752 E.0164 G1 X-35.101 Y-41.952 E.77392 G2 X-35.49 Y-42.096 I-.743 J1.406 E.0128 G1 X-17.834 Y-59.752 E.76764 G1 X-18.368 Y-59.752 E.0164 G1 X-35.93 Y-42.19 E.76358 G2 X-36.449 Y-42.204 I-.33 J2.532 E.016 G1 X-18.901 Y-59.752 E.76295 G1 X-19.435 Y-59.752 E.0164 G1 X-37.081 Y-42.106 E.76721 G2 X-38.094 Y-41.598 I.743 J2.745 E.03509 G1 X-38.108 Y-41.612 E.00062 G1 X-19.969 Y-59.752 E.7887 G1 X-20.502 Y-59.752 E.0164 G1 X-27.052 Y-53.202 E.28477 G1 X-27.052 Y-52.752 E.01384 G1 X-27.502 Y-52.752 E.01384 G1 X-39.552 Y-40.702 E.5239 G1 X-39.552 Y-41.236 E.0164 G1 X-28.036 Y-52.752 E.50071 G1 X-28.569 Y-52.752 E.0164 G1 X-39.552 Y-41.769 E.47751 G1 X-39.552 Y-42.303 E.0164 G1 X-29.103 Y-52.752 E.45431 G1 X-29.636 Y-52.752 E.0164 G1 X-39.552 Y-42.836 E.43111 G1 X-39.552 Y-43.37 E.0164 G1 X-30.17 Y-52.752 E.40791 G1 X-30.704 Y-52.752 E.0164 G1 X-39.552 Y-43.904 E.38471 G1 X-39.552 Y-44.437 E.0164 G1 X-31.237 Y-52.752 E.36151 G1 X-31.771 Y-52.752 E.0164 G1 X-39.552 Y-44.971 E.33832 G1 X-39.552 Y-45.504 E.0164 G1 X-32.304 Y-52.752 E.31512 G1 X-32.838 Y-52.752 E.0164 G1 X-39.552 Y-46.038 E.29192 G1 X-39.552 Y-46.571 E.0164 G1 X-33.371 Y-52.752 E.26872 G1 X-33.905 Y-52.752 E.0164 G1 X-39.552 Y-47.105 E.24552 G1 X-39.552 Y-47.638 E.0164 G1 X-34.438 Y-52.752 E.22232 G1 X-34.972 Y-52.752 E.0164 G1 X-39.552 Y-48.172 E.19912 G1 X-39.552 Y-48.706 E.0164 G1 X-35.506 Y-52.752 E.17593 G1 X-35.548 Y-52.752 E.00131 G1 X-35.548 Y-53.243 E.0151 G1 X-39.552 Y-49.239 E.17408 G1 X-39.552 Y-49.773 E.0164 G1 X-35.548 Y-53.777 E.17408 G1 X-35.548 Y-54.31 E.0164 G1 X-39.552 Y-50.306 E.17408 G1 X-39.552 Y-50.84 E.0164 G1 X-35.548 Y-54.844 E.17408 G1 X-35.548 Y-55.377 E.0164 G1 X-39.552 Y-51.373 E.17408 G1 X-39.552 Y-51.907 E.0164 G1 X-35.548 Y-55.911 E.17408 G1 X-35.548 Y-56.444 E.0164 G1 X-39.744 Y-52.248 E.18245 G1 X-40.278 Y-52.248 E.0164 G1 X-35.548 Y-56.978 E.20565 G1 X-35.548 Y-57.511 E.0164 G1 X-40.811 Y-52.248 E.22884 G1 X-41.345 Y-52.248 E.0164 G1 X-35.548 Y-58.045 E.25204 G1 X-35.548 Y-58.579 E.0164 G1 X-41.879 Y-52.248 E.27524 G1 X-42.412 Y-52.248 E.0164 G1 X-35.548 Y-59.112 E.29844 G1 X-35.548 Y-59.646 E.0164 G1 X-42.946 Y-52.248 E.32164 G1 X-43.479 Y-52.248 E.0164 G1 X-35.976 Y-59.752 E.32625 G1 X-36.509 Y-59.752 E.0164 G1 X-44.013 Y-52.248 E.32625 G1 X-44.546 Y-52.248 E.0164 G1 X-37.043 Y-59.752 E.32625 G1 X-37.576 Y-59.752 E.0164 G1 X-45.08 Y-52.248 E.32625 G1 X-45.614 Y-52.248 E.0164 G1 X-38.11 Y-59.752 E.32625 G1 X-38.643 Y-59.752 E.0164 G1 X-46.147 Y-52.248 E.32625 G1 X-46.681 Y-52.248 E.0164 G1 X-39.177 Y-59.752 E.32625 G1 X-39.71 Y-59.752 E.0164 G1 X-47.214 Y-52.248 E.32625 G1 X-47.748 Y-52.248 E.0164 G1 X-40.244 Y-59.752 E.32625 G1 X-40.778 Y-59.752 E.0164 G1 X-48.281 Y-52.248 E.32625 G1 X-48.815 Y-52.248 E.0164 G1 X-41.311 Y-59.752 E.32625 G1 X-41.845 Y-59.752 E.0164 G1 X-49.348 Y-52.248 E.32625 G1 X-49.882 Y-52.248 E.0164 G1 X-42.378 Y-59.752 E.32625 G1 X-42.912 Y-59.752 E.0164 G1 X-50.416 Y-52.248 E.32625 G1 X-50.949 Y-52.248 E.0164 G1 X-43.445 Y-59.752 E.32625 G1 X-43.979 Y-59.752 E.0164 G1 X-51.483 Y-52.248 E.32625 G1 X-51.552 Y-52.248 E.00213 G1 X-51.552 Y-52.713 E.01428 G1 X-44.513 Y-59.752 E.30606 G1 X-45.046 Y-59.752 E.0164 G1 X-51.552 Y-53.246 E.28286 G1 X-51.552 Y-53.78 E.0164 G1 X-45.58 Y-59.752 E.25967 G1 X-46.113 Y-59.752 E.0164 G1 X-51.552 Y-54.313 E.23647 G1 X-51.552 Y-54.847 E.0164 G1 X-46.647 Y-59.752 E.21327 G1 X-47.18 Y-59.752 E.0164 G1 X-51.552 Y-55.38 E.19007 M73 P14 R69 G1 X-51.552 Y-55.914 E.0164 G1 X-47.714 Y-59.752 E.16687 G1 X-48.247 Y-59.752 E.0164 G1 X-51.552 Y-56.447 E.14367 G1 X-51.552 Y-56.981 E.0164 G1 X-48.781 Y-59.752 E.12047 G1 X-49.315 Y-59.752 E.0164 G1 X-51.552 Y-57.515 E.09728 G1 X-51.552 Y-58.048 E.0164 G1 X-49.848 Y-59.752 E.07408 G1 X-50.382 Y-59.752 E.0164 G1 X-51.552 Y-58.582 E.05088 G1 X-51.552 Y-59.115 E.0164 G1 X-50.746 Y-59.922 E.03506 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.552 Y-59.115 G1 X-51.552 Y-58.582 G1 X-51.321 Y-58.812 ;WIPE_END G1 X-43.863 Y-57.189 Z.8 F30000 G1 X-27.222 Y-53.566 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-21.036 Y-59.752 E.26895 G1 X-21.569 Y-59.752 E.0164 G1 X-27.052 Y-54.269 E.23838 G1 X-27.052 Y-54.803 E.0164 G1 X-22.103 Y-59.752 E.21518 G1 X-22.636 Y-59.752 E.0164 G1 X-27.052 Y-55.336 E.19198 G1 X-27.052 Y-55.87 E.0164 G1 X-23.17 Y-59.752 E.16878 G1 X-23.704 Y-59.752 E.0164 G1 X-27.052 Y-56.404 E.14558 G1 X-27.052 Y-56.937 E.0164 G1 X-24.237 Y-59.752 E.12238 G1 X-24.771 Y-59.752 E.0164 G1 X-27.052 Y-57.471 E.09918 G1 X-27.052 Y-58.004 E.0164 G1 X-25.304 Y-59.752 E.07599 G1 X-25.838 Y-59.752 E.0164 G1 X-27.052 Y-58.538 E.05279 G1 X-27.052 Y-59.071 E.0164 G1 X-26.202 Y-59.922 E.03697 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-27.052 Y-59.071 G1 X-27.052 Y-58.538 G1 X-26.865 Y-58.725 ;WIPE_END G1 X-23.26 Y-51.997 Z.8 F30000 G1 X8.901 Y8.011 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X8.838 Y8.048 E.00204 G1 X8.903 Y8.083 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.405 Y59.464 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.504648 G1 F15000 G2 X21.414 Y59.548 I-.028 J.046 E.0089 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X21.405 Y59.564 G1 X21.347 Y59.564 G1 X21.318 Y59.514 G1 X21.347 Y59.464 G1 X21.405 Y59.464 ;WIPE_END G1 X27.39 Y59.19 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397572 G1 F15000 G2 X27.383 Y58.547 I-4.887 J-.268 E.0186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.311 Y56.28 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.554982 G1 F14945.575 G1 X26.711 Y56.88 E.03541 G1 X26.857 Y57.065 E.00983 G1 X27.204 Y57.666 E.02895 G1 X27.267 Y57.819 E.0069 ;WIDTH:0.531951 G1 F15000 G1 X27.305 Y58.048 E.00926 ;WIDTH:0.485887 G1 X27.343 Y58.278 E.00839 ;WIDTH:0.439824 G1 X27.38 Y58.507 E.00752 G1 X27.357 Y58.276 E.00752 ;WIDTH:0.485887 G1 X27.334 Y58.044 E.00839 ;WIDTH:0.548776 G1 X27.311 Y57.813 E.00958 G1 X27.311 Y56.32 E.06154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.756 Y55.207 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.086 Y56.876 E.07255 G1 X26.451 Y57.257 E.0162 G1 X26.819 Y57.888 E.02245 G1 X27.018 Y58.604 E.02282 G3 X26.983 Y59.556 I-3.859 J.335 E.02933 G1 X27.756 Y59.556 E.02375 G1 X27.756 Y55.247 E.1324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X27.756 Y57.247 ;WIPE_END G1 X22.735 Y51.498 Z.8 F30000 G1 X-42.652 Y-23.367 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:0.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;0.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1 I-.257 J1.189 P1 F30000 G1 X49.371 Y-1.689 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3480 G1 X49.533 Y-1.743 E.00525 G1 X49.764 Y-1.79 E.00724 G1 X49.914 Y-1.8 E.00462 G1 X50.236 Y-1.79 E.0099 G1 X50.467 Y-1.744 E.00724 G1 X50.691 Y-1.668 E.00727 G1 X50.903 Y-1.564 E.00726 G1 X51.099 Y-1.432 E.00726 G1 X51.277 Y-1.277 E.00725 G1 X51.432 Y-1.099 E.00725 G1 X51.564 Y-.903 E.00726 G1 X51.668 Y-.691 E.00726 G1 X51.744 Y-.467 E.00727 G1 X51.79 Y-.236 E.00724 G1 X51.805 Y0 E.00727 G1 X51.79 Y.236 E.00727 G1 X51.744 Y.467 E.00724 G1 X51.668 Y.691 E.00727 G1 X51.564 Y.903 E.00726 G1 X51.432 Y1.099 E.00726 G1 X51.277 Y1.277 E.00725 G1 X51.099 Y1.432 E.00725 G1 X50.903 Y1.564 E.00726 G1 X50.691 Y1.668 E.00726 G1 X50.467 Y1.744 E.00727 G1 X50.236 Y1.79 E.00724 G1 X50 Y1.805 E.00727 G1 X49.764 Y1.79 E.00727 G1 X49.533 Y1.744 E.00724 G1 X49.309 Y1.668 E.00727 G1 X49.097 Y1.564 E.00726 G1 X48.901 Y1.432 E.00726 G1 X48.723 Y1.277 E.00725 G1 X48.568 Y1.099 E.00725 G1 X48.436 Y.903 E.00726 G1 X48.332 Y.691 E.00726 G1 X48.256 Y.467 E.00727 G1 X48.21 Y.236 E.00724 G1 X48.195 Y0 E.00727 G1 X48.21 Y-.236 E.00727 G1 X48.256 Y-.467 E.00724 G1 X48.332 Y-.691 E.00727 G1 X48.436 Y-.903 E.00726 G1 X48.568 Y-1.099 E.00726 G1 X48.723 Y-1.277 E.00725 G1 X48.901 Y-1.432 E.00725 G1 X49.097 Y-1.564 E.00726 G1 X49.309 Y-1.668 E.00726 G1 X49.333 Y-1.676 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3480 G1 X49.533 Y-1.743 G1 X49.764 Y-1.79 G1 X49.914 Y-1.8 G1 X50.236 Y-1.79 G1 X50.467 Y-1.744 G1 X50.691 Y-1.668 G1 X50.903 Y-1.564 G1 X51.099 Y-1.432 G1 X51.202 Y-1.343 ;WIPE_END G1 X50.485 Y-2.541 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 M106 S255 G1 X50.497 Y-2.54 E.00038 G1 X50.991 Y-2.392 E.01585 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.0156 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.0156 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.0156 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.445 Y-2.545 E.01374 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.365 Y-2.158 F30000 ;TYPE:Gap infill ;WIDTH:0.384787 G1 F12000 G1 X50.297 Y-2.173 E.00192 G2 X47.967 Y-.83 I-.3 J2.172 E.08065 G2 X47.803 Y0 I2.278 J.88 E.02368 G1 X47.804 Y.011 E.00032 G2 X50.578 Y-2.115 I2.193 J-.012 E.27114 G1 X50.404 Y-2.15 E.00495 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.297 Y-2.173 G1 X50 Y-2.197 G1 X49.572 Y-2.152 G1 X49.159 Y-2.029 G1 X48.781 Y-1.825 G1 X48.547 Y-1.634 ;WIPE_END G1 X40.973 Y-.692 Z1 F30000 G1 X28.185 Y.9 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X28.015 Y1.213 E.01093 G3 X26.2 Y2.185 I-1.818 J-1.213 E.06589 G3 X25.986 Y-2.175 I.003 J-2.185 E.2042 G3 X28.217 Y.835 I.212 J2.175 E.13832 G1 X28.202 Y.864 E.001 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.015 Y1.213 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.731 Y2.112 ;WIPE_END G1 X19.275 Y.48 Z1 F30000 G1 X7.71 Y-2.052 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.151 J2.165 E.33495 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.27 J2.028 E.24847 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.557 Y4.266 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.558 Y4.258 E.00023 G3 X9.283 Y3.844 I1.132 J1.143 E.02595 G3 X9.656 Y3.792 I.384 J1.389 E.01159 G3 X8.418 Y4.416 I.034 J1.608 E.26652 G1 X8.53 Y4.295 E.00508 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.558 Y4.258 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.49 Y3.803 G1 X9.656 Y3.792 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.316 Y3.912 G1 X10.368 Y3.938 ;WIPE_END G1 X3.161 Y6.449 Z1 F30000 G1 X-16.248 Y13.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.147 J-2.165 E.33451 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G1 X-30.758 Y7.391 E.00646 G3 X-29.054 Y3.776 I.461 J-1.992 E.24193 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.461 Y8.974 Z1 F30000 G1 X-29.158 Y6.535 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.167 Y6.533 E.0003 G3 X-30.717 Y3.844 I-1.143 J-1.132 E.18168 G3 X-30.344 Y3.792 I.384 J1.389 E.01159 G3 X-29.03 Y6.375 I.034 J1.608 E.11085 G1 X-29.133 Y6.504 E.00507 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.167 Y6.533 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.969 Y6.862 ;WIPE_END G1 X-24.827 Y11.392 Z1 F30000 G1 X4.752 Y33.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X3.425 Y40.653 Z1 F30000 G1 X4.752 Y47.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X-5.691 Y47.86 Z1 F30000 G1 X-42.748 Y51.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-44.515 Y43.637 Z1 F30000 G1 X-42.748 Y31.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.312 Y23.669 Z1 F30000 G1 X-33.802 Y-38.197 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.937 Y-37.924 E.01011 G3 X-37.006 Y-41.924 I-2.363 J-1.365 E.35547 G1 X-36.656 Y-41.994 E.01184 G3 X-33.779 Y-38.244 I.356 J2.706 E.1896 G1 X-33.784 Y-38.233 E.00041 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.147 Y-38.424 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.156 Y-38.4 E.00085 G3 X-36.901 Y-41.53 I-2.144 J-.888 E.31242 G1 X-36.603 Y-41.59 E.01007 G3 X-34.058 Y-38.687 I.303 J2.301 E.15118 G1 X-34.134 Y-38.462 E.00789 G1 X-34.559 Y-38.567 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-36.788 Y-41.109 I-1.742 J-.722 E.23505 G1 X-36.546 Y-41.157 E.00758 G3 X-34.544 Y-38.604 I.246 J1.869 E.1201 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.667 Y-38.345 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.041 Y-37.421 ;WIPE_END G1 X-37.45 Y-29.92 Z1 F30000 G1 X-38.988 Y-21.734 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.941 Y-21.996 E.00883 G3 X-37.962 Y-23.453 I2.632 J.71 E.05931 G3 X-36.423 Y-24.009 I1.676 J2.231 E.05506 G3 X-39.011 Y-21.645 I.115 J2.724 E.44199 G1 X-38.998 Y-21.695 E.00172 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.589 Y-21.654 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.548 Y-21.89 E.00794 G3 X-37.461 Y-23.298 I2.239 J.605 E.06056 G3 X-36.397 Y-23.603 I1.138 J1.965 E.03708 G3 X-38.608 Y-21.592 I.088 J2.317 E.37562 G1 X-38.6 Y-21.616 E.00084 G1 X-38.162 Y-21.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.127 Y-21.778 E.00648 G3 X-37.022 Y-23.03 I1.818 J.491 E.05318 G3 X-36.368 Y-23.169 I.745 J1.896 E.02061 G3 X-38.176 Y-21.532 I.059 J1.882 E.28206 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.127 Y-21.778 G1 X-38.042 Y-22.01 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-37 Y-23.037 ;WIPE_END G1 X-29.38 Y-22.607 Z1 F30000 G1 X-15.914 Y-21.846 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.878 Y-21.607 E.00803 G3 X-19.794 Y-23.235 I-2.43 J.32 E.34072 G3 X-18.399 Y-23.736 I1.508 J2.009 E.0499 G3 X-15.94 Y-21.92 I.092 J2.449 E.10948 G1 X-15.927 Y-21.884 E.00128 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.313 Y-21.767 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.281 Y-21.554 E.00715 G3 X-19.323 Y-23.06 I-2.026 J.267 E.29304 G3 X-18.373 Y-23.33 I1.006 J1.737 E.03311 G3 X-16.333 Y-21.815 I.065 J2.042 E.09094 G1 X-16.328 Y-21.804 E.0004 G1 X-16.74 Y-21.682 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.715 Y-21.497 E.00574 G3 X-18.717 Y-22.844 I-1.595 J.209 E.22673 G3 X-18.344 Y-22.896 I.384 J1.389 E.01159 G3 X-16.759 Y-21.716 I.034 J1.608 E.06536 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.715 Y-21.497 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.32 Y-20.01 G1 X-17.396 Y-19.96 ;WIPE_END G1 X-18.444 Y-27.52 Z1 F30000 G1 X-20.277 Y-40.737 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.244 Y-40.779 E.00179 G3 X-19.61 Y-41.358 I1.943 J1.491 E.02862 G3 X-18.399 Y-41.736 I1.317 J2.092 E.04254 G3 X-20.422 Y-40.513 I.099 J2.447 E.42872 G1 X-20.299 Y-40.703 E.00752 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.511 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.925 Y-40.535 E.00092 G3 X-19.323 Y-41.06 I1.618 J1.249 E.02667 G3 X-18.373 Y-41.33 I1.006 J1.737 E.03311 G3 X-20.075 Y-40.313 I.066 J2.043 E.35736 G1 X-19.961 Y-40.478 E.00665 G1 X-19.582 Y-40.272 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-18.717 Y-40.844 I1.272 J.984 E.03245 G3 X-18.344 Y-40.896 I.384 J1.39 E.01159 G3 X-19.606 Y-40.24 I.034 J1.608 E.26527 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.51 Y-40.885 G1 X-18.344 Y-40.896 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.822 Y-40.823 ;WIPE_END G1 X-13.774 Y-34.353 Z1 F30000 G1 X27.252 Y31.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z1 F30000 G1 X-28.09 Y-52.948 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45573 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.946 E.32013 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32013 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45573 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z1 F30000 G1 X7.055 Y-53.79 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z1 F30000 G1 X-40.155 Y-5.355 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.186 J1.445 E.44457 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.447 J1.447 E.19549 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.447 J1.447 E.19549 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.186 J-1.445 E.44457 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.304 Y-2.782 Z1 F30000 G1 X-48.762 Y-.943 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.615 Y-1.213 E.00943 G3 X-47.014 Y-2.175 I1.818 J1.213 E.0593 G3 X-46.8 Y2.185 I.212 J2.175 E.21737 G3 X-48.817 Y-.835 I.003 J-2.185 E.13173 G1 X-48.78 Y-.908 E.00249 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.615 Y-1.213 G1 X-48.345 Y-1.545 G1 X-48.014 Y-1.817 G1 X-47.636 Y-2.019 G1 X-47.434 Y-2.091 G1 X-47.284 Y-2.121 ;WIPE_END G1 X-47.149 Y5.51 Z1 F30000 G1 X-46.192 Y59.809 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.192 Y59.804 E.00016 G3 X-45.01 Y57.403 I1.396 J-.804 E.09701 G3 X-44.8 Y60.61 I.207 J1.597 E.16172 G3 X-46.075 Y59.979 I.004 J-1.611 E.0453 G1 X-46.17 Y59.842 E.0051 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.192 Y59.804 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.038 Y57.975 ;WIPE_END G1 X-38.408 Y58.178 Z1 F30000 G1 X22.808 Y59.809 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.808 Y59.804 E.00016 G3 X23.99 Y57.403 I1.396 J-.804 E.09701 G3 X24.2 Y60.61 I.207 J1.597 E.16172 G3 X22.925 Y59.979 I.004 J-1.611 E.0453 G1 X22.83 Y59.842 E.00511 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.808 Y59.804 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.962 Y57.974 ;WIPE_END G1 X17.574 Y52.569 Z1 F30000 G1 X-40.59 Y-5.79 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-45.815 Y-3.259 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-47.111 Y-4.556 E.05633 G1 X-48.356 Y-4.556 E.03824 G1 X-48.356 Y-3.031 E.04686 G1 X-48.092 Y-3.167 E.00913 G1 X-47.485 Y-3.35 E.01947 G1 X-46.818 Y-3.42 E.0206 G1 X-46.151 Y-3.358 E.0206 G1 X-45.853 Y-3.271 E.00953 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.911 Y-3.803 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.460854 G1 F15000 G1 X-47.273 Y-4.165 E.01742 G1 X-47.949 Y-4.149 E.02302 G1 X-47.949 Y-3.635 E.01748 G3 X-46.951 Y-3.8 I1.033 J3.16 E.03456 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.135 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409515 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385476 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342224 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.30549 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275113 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276404 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307218 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344556 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.393962 G2 X-49.135 Y1.264 I8.181 J-1.359 E.0117 G1 X-48.426 Y17.407 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-48.489 Y17.443 E.00204 G1 X-48.424 Y17.478 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-47.991 Y59.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.414034 G1 F15000 G1 X-47.973 Y58.733 E.01387 ;WIDTH:0.432845 G1 X-47.955 Y58.275 E.01457 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.595 Y55.762 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.432619 G1 F15000 G1 X-47.595 Y56.755 E.03153 G1 X-47.257 Y56.367 E.01632 G1 X-47.106 Y56.251 E.00606 G1 X-47.567 Y55.79 E.02071 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.979 Y54.836 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.423264 G1 F15000 G2 X-47.964 Y58.078 I73.776 J1.274 E.10048 ;WIDTH:0.447622 G1 X-47.954 Y58.235 E.00519 G1 X-47.625 Y57.454 E.02793 ;WIDTH:0.419999 G1 X-47.128 Y56.776 E.02583 G1 X-46.526 Y56.289 E.02381 G1 X-47.95 Y54.864 E.06191 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.356 Y53.926 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.356 Y59.556 E.173 G1 X-47.575 Y59.556 E.02398 G1 X-47.645 Y59.025 E.01646 G1 X-47.555 Y58.287 E.02282 G1 X-47.276 Y57.599 E.02282 G1 X-46.829 Y57.006 E.02282 G1 X-46.244 Y56.548 E.02282 G1 X-45.89 Y56.392 E.0119 G1 X-48.328 Y53.954 E.10593 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.057 Y59.567 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-42.12 Y59.603 E.00204 G1 X-42.055 Y59.638 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.534 Y8.111 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.398919 G1 F15000 G1 X-29.95 Y8.214 E.01245 G1 X-30.088 Y8.216 E.00401 G1 X-29.534 Y8.77 E.02276 G1 X-29.534 Y8.151 E.01798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-29.534 Y8.77 G1 X-30.088 Y8.216 G1 X-29.95 Y8.214 G1 X-29.534 Y8.111 ;WIPE_END G1 X-31.983 Y.882 Z1 F30000 G1 X-39.013 Y-19.862 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G2 X-38.307 Y-19.062 I3.818 J-2.658 E.02963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-20.171 F30000 ;TYPE:Gap infill ;WIDTH:0.46514 G1 F12000 G1 X-39.333 Y-20.461 E.0101 ;WIDTH:0.441846 G3 X-39.356 Y-20.68 I3.324 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-20.872 E.00563 ;WIDTH:0.366946 G3 X-39.376 Y-21.682 I8.954 J-.421 E.02139 ;WIDTH:0.399137 G3 X-39.356 Y-21.896 I3.283 J.204 E.00624 ;WIDTH:0.439025 G1 X-39.337 Y-22.088 E.00622 ;WIDTH:0.475337 G3 X-39.285 Y-22.405 I4.888 J.63 E.01132 G1 X-38.463 Y-24.659 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.624754 G1 F13153.341 G2 X-38.447 Y-24.561 I-.036 J.056 E.01462 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.712 Y-24.486 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-38.979 Y-25.753 E.05506 G1 X-38.979 Y-23.531 E.06829 G1 X-38.459 Y-24.04 E.02238 G3 X-37.748 Y-24.468 I1.981 J2.487 E.02557 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.014 Y-24.321 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.356 Y-26.664 E.10178 G1 X-39.356 Y-22.814 E.11829 G1 X-39.035 Y-22.761 E.00999 G1 X-38.769 Y-23.198 E.01572 G1 X-38.498 Y-23.504 E.01255 G1 X-38.023 Y-23.884 E.01868 G1 X-37.506 Y-24.167 E.01813 G1 X-37.052 Y-24.309 E.01462 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.059 Y-36.904 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-37.964 Y-36.82 E.00351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.97 Y-37.946 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.034 Y-37.91 E.00204 G1 X-38.969 Y-37.875 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-38.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465138 G1 F12000 G1 X-39.333 Y-38.461 E.0101 ;WIDTH:0.441845 G3 X-39.356 Y-38.68 I3.325 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-38.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-39.682 I8.952 J-.421 E.02139 ;WIDTH:0.399139 G3 X-39.356 Y-39.896 I3.284 J.204 E.00624 ;WIDTH:0.439027 G1 X-39.337 Y-40.088 E.00622 ;WIDTH:0.475339 G3 X-39.285 Y-40.405 I4.892 J.631 E.01132 G1 X-38.629 Y-42.349 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.364452 G1 F15000 G1 X-38.213 Y-42.625 E.01309 G1 X-38.629 Y-43.041 E.01543 G1 X-38.629 Y-42.389 E.01709 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.979 Y-41.531 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-38.459 Y-42.04 E.02238 G3 X-37.621 Y-42.527 I2.154 J2.745 E.02986 G1 X-38.979 Y-43.884 E.059 G1 X-38.979 Y-41.571 E.0711 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.035 Y-40.761 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-38.769 Y-41.198 E.01572 G1 X-38.498 Y-41.504 E.01255 G1 X-37.976 Y-41.915 E.02044 G1 X-37.506 Y-42.167 E.01638 G1 X-37.088 Y-42.308 E.01354 G1 X-36.898 Y-42.337 E.0059 G1 X-39.356 Y-44.795 E.10679 G1 X-39.356 Y-40.814 E.12232 G1 X-39.074 Y-40.767 E.00876 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.744 Y-58.248 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-35.744 Y-59.556 E.04019 G1 X-37.052 Y-59.556 E.04019 G1 X-35.772 Y-58.276 E.05561 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.103 Y-59.215 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.432092 G1 F15000 G1 X-36.176 Y-59.173 E.00267 G1 X-36.099 Y-59.138 E.00269 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 X6.256 Y-58.376 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X6.256 Y-59.556 E.03625 G1 X5.076 Y-59.556 E.03625 G1 X6.228 Y-58.404 E.05004 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.93 Y-59.244 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.356906 G1 F15000 G1 X5.871 Y-59.21 E.00174 G1 X5.929 Y-59.177 E.00172 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.851 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X14.549 Y-60 E.19 G1 X28.761 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.420209 G1 F15000 G1 X30.952 Y-57.73 E.09527 G1 X30.952 Y-57.197 E.0164 G1 X28.397 Y-59.752 E.11109 G1 X27.863 Y-59.752 E.0164 G1 X30.952 Y-56.663 E.13429 G1 X30.952 Y-56.13 E.0164 G1 X27.33 Y-59.752 E.15749 G1 X26.796 Y-59.752 E.0164 G1 X30.952 Y-55.596 E.18069 G1 X30.952 Y-55.063 E.0164 G1 X26.263 Y-59.752 E.20389 G1 X25.729 Y-59.752 E.0164 G1 X30.952 Y-54.529 E.22709 G1 X30.952 Y-53.995 E.0164 G1 X25.195 Y-59.752 E.25029 G1 X24.662 Y-59.752 E.0164 G1 X30.952 Y-53.462 E.27349 G1 X30.952 Y-52.928 E.0164 G1 X24.128 Y-59.752 E.29669 G1 X23.595 Y-59.752 E.0164 G1 X30.952 Y-52.395 E.31988 G1 X30.952 Y-52.248 E.00451 G1 X30.565 Y-52.248 E.0119 G1 X23.061 Y-59.752 E.32626 G1 X22.528 Y-59.752 E.0164 G1 X30.031 Y-52.248 E.32626 G1 X29.498 Y-52.248 E.0164 G1 X21.994 Y-59.752 E.32626 G1 X21.46 Y-59.752 E.0164 M73 P14 R68 G1 X28.964 Y-52.248 E.32626 G1 X28.431 Y-52.248 E.0164 G1 X20.927 Y-59.752 E.32626 G1 X20.393 Y-59.752 E.0164 G1 X27.897 Y-52.248 E.32626 G1 X27.363 Y-52.248 E.0164 G1 X19.86 Y-59.752 E.32626 G1 X19.326 Y-59.752 E.0164 G1 X26.83 Y-52.248 E.32626 G1 X26.296 Y-52.248 E.0164 G1 X18.793 Y-59.752 E.32626 G1 X18.259 Y-59.752 E.0164 G1 X25.763 Y-52.248 E.32626 G1 X25.229 Y-52.248 E.0164 G1 X17.725 Y-59.752 E.32626 G1 X17.192 Y-59.752 E.0164 G1 X24.696 Y-52.248 E.32626 G1 X24.162 Y-52.248 E.0164 G1 X16.658 Y-59.752 E.32626 G1 X16.125 Y-59.752 E.0164 G1 X23.629 Y-52.248 E.32626 G1 X23.095 Y-52.248 E.0164 G1 X15.591 Y-59.752 E.32626 G1 X15.058 Y-59.752 E.0164 G1 X22.561 Y-52.248 E.32626 G1 X22.028 Y-52.248 E.0164 G1 X14.948 Y-59.328 E.30782 G1 X14.948 Y-58.794 E.0164 G1 X21.494 Y-52.248 E.28462 G1 X20.961 Y-52.248 E.0164 G1 X14.948 Y-58.261 E.26142 G1 X14.948 Y-57.727 E.0164 G1 X20.427 Y-52.248 E.23822 G1 X19.894 Y-52.248 E.0164 G1 X14.948 Y-57.194 E.21502 G1 X14.948 Y-56.66 E.0164 G1 X19.36 Y-52.248 E.19182 G1 X18.952 Y-52.248 E.01255 G1 X18.952 Y-52.123 E.00386 G1 X14.948 Y-56.126 E.17408 G1 X14.948 Y-55.593 E.0164 G1 X18.952 Y-51.589 E.17408 G1 X18.952 Y-51.055 E.0164 G1 X14.948 Y-55.059 E.17408 G1 X14.948 Y-54.526 E.0164 G1 X18.952 Y-50.522 E.17408 G1 X18.952 Y-49.988 E.0164 G1 X14.948 Y-53.992 E.17408 G1 X14.948 Y-53.459 E.0164 G1 X18.952 Y-49.455 E.17408 G1 X18.952 Y-48.921 E.0164 G1 X14.948 Y-52.925 E.17408 G1 X14.948 Y-52.752 E.00532 G1 X14.588 Y-52.752 E.01108 G1 X18.952 Y-48.388 E.18975 G1 X18.952 Y-47.854 E.0164 G1 X14.054 Y-52.752 E.21295 G1 X13.521 Y-52.752 E.0164 G1 X18.952 Y-47.321 E.23615 G1 X18.952 Y-46.787 E.0164 G1 X12.987 Y-52.752 E.25935 G1 X12.453 Y-52.752 E.0164 G1 X18.952 Y-46.253 E.28255 G1 X18.952 Y-45.72 E.0164 G1 X11.92 Y-52.752 E.30575 G1 X11.386 Y-52.752 E.0164 G1 X18.952 Y-45.186 E.32895 G1 X18.952 Y-44.653 E.0164 G1 X10.853 Y-52.752 E.35214 G1 X10.319 Y-52.752 E.0164 G1 X18.952 Y-44.119 E.37534 G1 X18.952 Y-43.586 E.0164 G1 X9.786 Y-52.752 E.39854 G1 X9.252 Y-52.752 E.0164 G1 X18.952 Y-43.052 E.42174 G1 X18.952 Y-42.518 E.0164 G1 X8.718 Y-52.752 E.44494 G1 X8.185 Y-52.752 E.0164 G1 X18.952 Y-41.985 E.46814 G1 X18.952 Y-41.451 E.0164 G1 X7.651 Y-52.752 E.49134 G1 X7.118 Y-52.752 E.0164 G1 X19.122 Y-40.748 E.52192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X17.707 Y-42.162 ;WIPE_END G1 X13.24 Y-48.35 Z1 F30000 G1 X6.622 Y-57.517 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X4.386 Y-59.752 E.09719 G1 X3.853 Y-59.752 E.0164 G1 X6.452 Y-57.153 E.11301 G1 X6.452 Y-56.619 E.0164 G1 X3.319 Y-59.752 E.13621 G1 X2.786 Y-59.752 E.0164 G1 X6.452 Y-56.086 E.15941 G1 X6.452 Y-55.552 E.0164 G1 X2.252 Y-59.752 E.18261 G1 X1.718 Y-59.752 E.0164 G1 X6.452 Y-55.018 E.20581 G1 X6.452 Y-54.485 E.0164 G1 X1.185 Y-59.752 E.22901 G1 X.651 Y-59.752 E.0164 G1 X6.452 Y-53.951 E.2522 G1 X6.452 Y-53.418 E.0164 G1 X.118 Y-59.752 E.2754 G1 X-.416 Y-59.752 E.0164 G1 X18.952 Y-40.384 E.84209 G1 X18.952 Y-39.851 E.0164 G1 X-.949 Y-59.752 E.86529 G1 X-1.483 Y-59.752 E.0164 G1 X18.952 Y-39.317 E.88849 G1 X18.952 Y-38.783 E.0164 G1 X-2.017 Y-59.752 E.91169 G1 X-2.55 Y-59.752 E.0164 G1 X18.952 Y-38.25 E.93489 G1 X18.952 Y-37.716 E.0164 G1 X-3.084 Y-59.752 E.95808 G1 X-3.617 Y-59.752 E.0164 G1 X18.952 Y-37.183 E.98128 G1 X18.952 Y-36.649 E.0164 G1 X-4.151 Y-59.752 E1.00448 G1 X-4.684 Y-59.752 E.0164 G1 X18.952 Y-36.116 E1.02768 G1 X18.952 Y-35.582 E.0164 G1 X-5.218 Y-59.752 E1.05088 G1 X-5.752 Y-59.752 E.0164 G1 X18.952 Y-35.048 E1.07408 G1 X18.952 Y-34.515 E.0164 G1 X-6.285 Y-59.752 E1.09728 G1 X-6.819 Y-59.752 E.0164 G1 X18.952 Y-33.981 E1.12048 G1 X18.952 Y-33.448 E.0164 G1 X-7.352 Y-59.752 E1.14368 G1 X-7.886 Y-59.752 E.0164 G1 X18.952 Y-32.914 E1.16687 G1 X18.952 Y-32.381 E.0164 M73 P15 R68 G1 X-8.419 Y-59.752 E1.19007 G1 X-8.953 Y-59.752 E.0164 G1 X18.952 Y-31.847 E1.21327 G1 X18.952 Y-31.314 E.0164 G1 X-9.486 Y-59.752 E1.23647 G1 X-10.02 Y-59.752 E.0164 G1 X18.952 Y-30.78 E1.25967 G1 X18.952 Y-30.246 E.0164 G1 X-10.554 Y-59.752 E1.28287 G1 X-11.087 Y-59.752 E.0164 G1 X18.952 Y-29.713 E1.30607 G1 X18.952 Y-29.179 E.0164 G1 X-11.621 Y-59.752 E1.32927 G1 X-12.154 Y-59.752 E.0164 G1 X18.952 Y-28.646 E1.35247 G1 X18.952 Y-28.112 E.0164 G1 X-12.688 Y-59.752 E1.37567 G1 X-13.221 Y-59.752 E.0164 G1 X18.952 Y-27.579 E1.39886 G1 X18.952 Y-27.045 E.0164 G1 X-13.755 Y-59.752 E1.42206 G1 X-14.289 Y-59.752 E.0164 G1 X18.952 Y-26.511 E1.44526 G1 X18.952 Y-25.978 E.0164 G1 X-14.822 Y-59.752 E1.46846 G1 X-15.356 Y-59.752 E.0164 G1 X18.952 Y-25.444 E1.49166 G1 X18.952 Y-24.911 E.0164 G1 X-15.889 Y-59.752 E1.51486 G1 X-16.423 Y-59.752 E.0164 G1 X18.952 Y-24.377 E1.53806 G1 X18.952 Y-23.844 E.0164 G1 X-16.956 Y-59.752 E1.56126 G1 X-17.49 Y-59.752 E.0164 G1 X18.952 Y-23.31 E1.58446 G1 X18.952 Y-22.776 E.0164 G1 X-18.024 Y-59.752 E1.60765 G1 X-18.557 Y-59.752 E.0164 G1 X18.952 Y-22.243 E1.63085 G1 X18.952 Y-21.709 E.0164 G1 X-19.091 Y-59.752 E1.65405 G1 X-19.624 Y-59.752 E.0164 G1 X18.952 Y-21.176 E1.67725 G1 X18.952 Y-20.642 E.0164 G1 X-20.158 Y-59.752 E1.70045 G1 X-20.691 Y-59.752 E.0164 G1 X18.952 Y-20.109 E1.72365 G1 X18.952 Y-19.575 E.0164 G1 X-21.225 Y-59.752 E1.74685 G1 X-21.759 Y-59.752 E.0164 G1 X18.952 Y-19.041 E1.77005 G1 X18.952 Y-18.508 E.0164 G1 X-22.292 Y-59.752 E1.79325 G1 X-22.826 Y-59.752 E.0164 G1 X18.952 Y-17.974 E1.81645 G1 X18.952 Y-17.441 E.0164 G1 X-23.359 Y-59.752 E1.83964 G1 X-23.893 Y-59.752 E.0164 G1 X18.952 Y-16.907 E1.86284 G1 X18.952 Y-16.374 E.0164 G1 X-24.426 Y-59.752 E1.88604 G1 X-24.96 Y-59.752 E.0164 G1 X18.952 Y-15.84 E1.90924 G1 X18.952 Y-15.306 E.0164 G1 X-25.493 Y-59.752 E1.93244 G1 X-26.027 Y-59.752 E.0164 G1 X18.952 Y-14.773 E1.95564 G1 X18.952 Y-14.239 E.0164 G1 X-26.561 Y-59.752 E1.97884 G1 X-27.052 Y-59.752 E.0151 G1 X-27.052 Y-59.71 E.0013 G1 X18.952 Y-13.706 E2.0002 G1 X18.952 Y-13.172 E.0164 G1 X-27.052 Y-59.176 E2.0002 G1 X-27.052 Y-58.642 E.0164 G1 X18.952 Y-12.639 E2.0002 G1 X18.952 Y-12.105 E.0164 G1 X-27.052 Y-58.109 E2.0002 G1 X-27.052 Y-57.575 E.0164 G1 X18.952 Y-11.572 E2.0002 G1 X18.952 Y-11.038 E.0164 G1 X-27.052 Y-57.042 E2.0002 G1 X-27.052 Y-56.508 E.0164 G1 X18.952 Y-10.504 E2.0002 G1 X18.952 Y-9.971 E.0164 G1 X-27.052 Y-55.975 E2.0002 G1 X-27.052 Y-55.441 E.0164 G1 X18.952 Y-9.437 E2.0002 G1 X18.952 Y-8.904 E.0164 G1 X-27.052 Y-54.907 E2.0002 G1 X-27.052 Y-54.374 E.0164 G1 X18.952 Y-8.37 E2.0002 G1 X18.952 Y-7.837 E.0164 G1 X-27.052 Y-53.84 E2.0002 G1 X-27.052 Y-53.307 E.0164 G1 X18.952 Y-7.303 E2.0002 G1 X18.952 Y-6.769 E.0164 G1 X-27.052 Y-52.773 E2.0002 G1 X-27.052 Y-52.752 E.00066 G1 X-27.564 Y-52.752 E.01575 G1 X18.952 Y-6.236 E2.02247 G1 X18.952 Y-5.702 E.0164 G1 X-28.098 Y-52.752 E2.04567 G1 X-28.631 Y-52.752 E.0164 G1 X-17.756 Y-41.877 E.47284 G2 X-18.343 Y-41.93 I-.457 J1.771 E.0182 G1 X-29.165 Y-52.752 E.47052 G1 X-29.698 Y-52.752 E.0164 G1 X-18.827 Y-41.88 E.47269 G2 X-19.242 Y-41.762 I.242 J1.635 E.01331 G1 X-30.232 Y-52.752 E.47784 G1 X-30.766 Y-52.752 E.0164 G1 X-19.6 Y-41.586 E.48549 G2 X-19.927 Y-41.38 I1.372 J2.539 E.0119 G1 X-31.299 Y-52.752 E.49446 G1 X-31.833 Y-52.752 E.0164 G1 X-20.207 Y-41.126 E.50549 G2 X-20.448 Y-40.834 I.987 J1.064 E.01168 G1 X-32.366 Y-52.752 E.51818 G1 X-32.9 Y-52.752 E.0164 G1 X-20.65 Y-40.502 E.53259 G2 X-20.809 Y-40.127 I1.347 J.788 E.01256 G1 X-33.433 Y-52.752 E.54891 G1 X-33.967 Y-52.752 E.0164 G1 X-20.915 Y-39.7 E.56749 G2 X-20.945 Y-39.196 I3.053 J.433 E.01553 G1 X-34.67 Y-52.922 E.59677 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-57.365 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-37.766 Y-59.752 E.10379 G1 X-38.299 Y-59.752 E.0164 G1 X-35.548 Y-57.001 E.11961 G1 X-35.548 Y-56.467 E.0164 G1 X-38.833 Y-59.752 E.14281 G1 X-39.366 Y-59.752 E.0164 G1 X-35.548 Y-55.934 E.16601 G1 X-35.548 Y-55.4 E.0164 G1 X-39.9 Y-59.752 E.18921 G1 X-40.433 Y-59.752 E.0164 G1 X-35.548 Y-54.867 E.21241 G1 X-35.548 Y-54.333 E.0164 G1 X-40.967 Y-59.752 E.23561 G1 X-41.501 Y-59.752 E.0164 G1 X-35.378 Y-53.63 E.26618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-36.793 Y-55.044 ;WIPE_END G1 X-31.186 Y-49.865 Z1 F30000 G1 X26.103 Y3.05 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y4.898 E.08037 G1 X27.952 Y5.432 E.0164 G1 X25.486 Y2.967 E.10719 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X26.901 Y4.381 ;WIPE_END G1 X24.069 Y-2.186 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.503 Y-4.752 E.11156 G1 X20.969 Y-4.752 E.0164 G1 X23.694 Y-2.027 E.11845 G2 X23.473 Y-1.715 I1.476 J1.278 E.01179 G1 X20.436 Y-4.752 E.13205 G1 X19.902 Y-4.752 E.0164 G1 X23.285 Y-1.369 E.14707 G2 X23.133 Y-.988 I1.861 J.963 E.01265 G1 X19.369 Y-4.752 E.16366 G1 X18.952 Y-4.752 E.01281 G1 X18.952 Y-5.169 E.01281 G1 X-15.711 Y-39.832 E1.50712 G3 X-15.652 Y-39.239 I-2.95 J.592 E.01833 G1 X23.027 Y-.56 E1.68174 G2 X22.979 Y-.074 I2.441 J.487 E.01502 G1 X-15.708 Y-38.761 E1.68207 G3 X-15.826 Y-38.346 I-1.636 J-.243 E.01331 G1 X23.233 Y.714 E1.69828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y6.135 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X24.965 Y2.979 E.13724 G3 X23.221 Y1.235 I1.234 J-2.978 E.0778 G1 X-15.995 Y-37.981 E1.70509 G3 X-16.215 Y-37.668 I-2.399 J-1.453 E.01178 G1 X27.952 Y6.499 E1.92035 G1 X27.952 Y7.033 E.0164 G1 X-16.462 Y-37.382 E1.93108 G3 X-16.754 Y-37.14 I-1.064 J-.987 E.01168 G1 X27.952 Y7.566 E1.94377 G1 X27.952 Y8.1 E.0164 G1 X-17.09 Y-36.942 E1.95839 G3 X-17.461 Y-36.78 I-.684 J-1.054 E.0125 G1 X27.952 Y8.633 E1.97451 G1 X27.952 Y9.167 E.0164 G1 X-17.888 Y-36.673 E1.99308 G3 X-18.392 Y-36.643 I-.433 J-3.053 E.01553 G1 X27.952 Y9.701 E2.01498 G1 X27.952 Y10.234 E.0164 G1 X-19.036 Y-36.753 E2.04297 G3 X-20.848 Y-38.566 I.695 J-2.508 E.0824 G1 X-35.034 Y-52.752 E.61678 G1 X-35.548 Y-52.752 E.0158 G1 X-35.548 Y-53.266 E.0158 G1 X-42.034 Y-59.752 E.282 G1 X-42.568 Y-59.752 E.0164 G1 X27.952 Y10.768 E3.06612 G1 X27.952 Y11.301 E.0164 G1 X-43.101 Y-59.752 E3.08932 G1 X-43.635 Y-59.752 E.0164 G1 X27.952 Y11.835 E3.11252 G1 X27.952 Y12.368 E.0164 G1 X-44.168 Y-59.752 E3.13571 G1 X-44.702 Y-59.752 E.0164 G1 X27.952 Y12.902 E3.15891 G1 X27.952 Y13.435 E.0164 G1 X-45.235 Y-59.752 E3.18211 G1 X-45.769 Y-59.752 E.0164 G1 X27.952 Y13.969 E3.20531 G1 X27.952 Y14.503 E.0164 G1 X-46.303 Y-59.752 E3.22851 G1 X-46.836 Y-59.752 E.0164 G1 X27.952 Y15.036 E3.25171 G1 X27.952 Y15.57 E.0164 G1 X-47.37 Y-59.752 E3.27491 G1 X-47.903 Y-59.752 E.0164 G1 X-40.4 Y-52.248 E.32626 G1 X-40.933 Y-52.248 E.0164 G1 X-48.437 Y-59.752 E.32626 G1 X-48.97 Y-59.752 E.0164 G1 X-41.467 Y-52.248 E.32626 G1 X-42 Y-52.248 E.0164 G1 X-49.504 Y-59.752 E.32626 G1 X-50.038 Y-59.752 E.0164 G1 X-42.534 Y-52.248 E.32626 G1 X-43.067 Y-52.248 E.0164 G1 X-50.571 Y-59.752 E.32626 G1 X-51.105 Y-59.752 E.0164 G1 X-43.601 Y-52.248 E.32626 G1 X-44.135 Y-52.248 E.0164 G1 X-51.552 Y-59.665 E.3225 G1 X-51.552 Y-59.132 E.0164 G1 X-44.668 Y-52.248 E.2993 G1 X-45.202 Y-52.248 E.0164 G1 X-51.552 Y-58.598 E.2761 G1 X-51.552 Y-58.065 E.0164 G1 X-45.735 Y-52.248 E.2529 G1 X-46.269 Y-52.248 E.0164 G1 X-51.552 Y-57.531 E.2297 G1 X-51.552 Y-56.998 E.0164 G1 X-46.802 Y-52.248 E.20651 G1 X-47.336 Y-52.248 E.0164 G1 X-51.552 Y-56.464 E.18331 G1 X-51.552 Y-55.931 E.0164 G1 X-47.869 Y-52.248 E.16011 G1 X-48.403 Y-52.248 E.0164 G1 X-51.552 Y-55.397 E.13691 G1 X-51.552 Y-54.863 E.0164 G1 X-48.937 Y-52.248 E.11371 G1 X-49.47 Y-52.248 E.0164 G1 X-51.552 Y-54.33 E.09051 G1 X-51.552 Y-53.796 E.0164 G1 X-50.004 Y-52.248 E.06731 G1 X-50.537 Y-52.248 E.0164 G1 X-51.552 Y-53.263 E.04411 G1 X-51.552 Y-52.729 E.0164 G1 X-50.901 Y-52.078 E.02829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-51.57 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y16.103 E2.94237 G1 X27.952 Y16.637 E.0164 G1 X-39.552 Y-50.867 E2.935 G1 X-39.552 Y-50.333 E.0164 G1 X27.952 Y17.17 E2.935 G1 X27.952 Y17.548 E.01162 G1 X27.796 Y17.548 E.00479 G1 X8.748 Y-1.5 E.82819 G1 X8.748 Y-.966 E.0164 G1 X27.263 Y17.548 E.80499 G1 X27.238 Y17.548 E.00075 G1 X27.238 Y17.752 E.00626 G1 X26.933 Y17.752 E.00939 G1 X8.748 Y-.433 E.79064 G1 X8.748 Y.101 E.0164 G1 X26.399 Y17.752 E.76744 G1 X25.865 Y17.752 E.0164 G1 X8.748 Y.635 E.74425 G1 X8.748 Y1.168 E.0164 G1 X10.437 Y2.857 E.07342 G3 X12.243 Y4.663 I-.719 J2.525 E.08203 G1 X25.332 Y17.752 E.56908 G1 X24.798 Y17.752 E.0164 G1 X12.344 Y5.298 E.5415 G3 X12.317 Y5.804 I-3.101 J.086 E.0156 G1 X24.265 Y17.752 E.51949 G1 X23.731 Y17.752 E.0164 G1 X12.211 Y6.232 E.50089 G3 X12.054 Y6.608 I-1.507 J-.41 E.01257 G1 X23.198 Y17.752 E.48453 G1 X22.664 Y17.752 E.0164 G1 X11.852 Y6.94 E.47009 G3 X11.611 Y7.233 I-1.231 J-.769 E.01169 G1 X22.131 Y17.752 E.45737 G1 X21.952 Y17.752 E.00549 G1 X21.952 Y18.107 E.01091 G1 X11.332 Y7.487 E.46174 G3 X11.013 Y7.702 I-4.348 J-6.112 E.01182 G1 X21.952 Y18.64 E.4756 G1 X21.952 Y19.174 E.0164 G1 X10.649 Y7.871 E.49143 G3 X10.235 Y7.991 I-.66 J-1.513 E.01329 G1 X21.952 Y19.708 E.50944 G1 X21.952 Y20.241 E.0164 G1 X9.758 Y8.047 E.53019 G3 X9.168 Y7.991 I-.019 J-2.934 E.01823 G1 X21.952 Y20.775 E.55581 G1 X21.952 Y21.308 E.0164 G1 X8.748 Y8.104 E.57409 G1 X8.748 Y8.638 E.0164 G1 X21.952 Y21.842 E.57409 G1 X21.952 Y22.375 E.0164 G1 X8.748 Y9.172 E.57409 G1 X8.748 Y9.705 E.0164 G1 X21.952 Y22.909 E.57409 G1 X21.952 Y23.443 E.0164 G1 X8.748 Y10.239 E.57409 G1 X8.748 Y10.772 E.0164 G1 X21.952 Y23.976 E.57409 G1 X21.952 Y24.51 E.0164 G1 X8.748 Y11.306 E.57409 G1 X8.748 Y11.839 E.0164 G1 X21.952 Y25.043 E.57409 G1 X21.952 Y25.577 E.0164 G1 X8.748 Y12.373 E.57409 G1 X8.748 Y12.907 E.0164 G1 X21.952 Y26.11 E.57409 G1 X21.952 Y26.644 E.0164 G1 X8.748 Y13.44 E.57409 G1 X8.748 Y13.974 E.0164 G1 X21.952 Y27.177 E.57409 G1 X21.952 Y27.711 E.0164 G1 X8.489 Y14.248 E.58535 G1 X7.955 Y14.248 E.0164 G1 X21.952 Y28.245 E.60855 G1 X21.952 Y28.778 E.0164 G1 X7.422 Y14.248 E.63175 G1 X6.888 Y14.248 E.0164 G1 X21.952 Y29.312 E.65495 G1 X21.952 Y29.845 E.0164 G1 X6.355 Y14.248 E.67815 G1 X5.821 Y14.248 E.0164 G1 X21.952 Y30.379 E.70135 G1 X21.952 Y30.912 E.0164 G1 X5.288 Y14.248 E.72455 G1 X4.754 Y14.248 E.0164 G1 X22.122 Y31.616 E.75513 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.786 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y34.245 E.09418 G1 X27.952 Y34.778 E.0164 G1 X25.422 Y32.248 E.11001 G1 X24.888 Y32.248 E.0164 G1 X27.952 Y35.312 E.1332 G1 X27.952 Y35.845 E.0164 G1 X24.355 Y32.248 E.1564 G1 X23.821 Y32.248 E.0164 G1 X27.952 Y36.379 E.1796 G1 X27.952 Y36.912 E.0164 G1 X23.288 Y32.248 E.2028 G1 X22.754 Y32.248 E.0164 G1 X27.952 Y37.446 E.226 G1 X27.952 Y37.548 E.00315 G1 X27.521 Y37.548 E.01326 G1 X4.22 Y14.248 E1.01307 G1 X3.687 Y14.248 E.0164 G1 X27.191 Y37.752 E1.02192 G1 X26.657 Y37.752 E.0164 G1 X3.153 Y14.248 E1.02192 G1 X2.62 Y14.248 E.0164 G1 X26.124 Y37.752 E1.02192 G1 X25.59 Y37.752 E.0164 G1 X2.086 Y14.248 E1.02192 G1 X1.553 Y14.248 E.0164 G1 X25.056 Y37.752 E1.02192 G1 X24.523 Y37.752 E.0164 G1 X1.019 Y14.248 E1.02192 G1 X.485 Y14.248 E.0164 G1 X23.989 Y37.752 E1.02192 G1 X23.456 Y37.752 E.0164 G1 X-.048 Y14.248 E1.02192 G1 X-.582 Y14.248 E.0164 G1 X22.922 Y37.752 E1.02192 G1 X22.389 Y37.752 E.0164 G1 X-1.115 Y14.248 E1.02192 G1 X-1.649 Y14.248 E.0164 G1 X21.952 Y37.849 E1.02613 G1 X21.952 Y38.382 E.0164 G1 X-2.182 Y14.248 E1.04933 G1 X-2.716 Y14.248 E.0164 G1 X21.952 Y38.916 E1.07253 G1 X21.952 Y39.45 E.0164 G1 X-3.25 Y14.248 E1.09573 G1 X-3.783 Y14.248 E.0164 G1 X22.122 Y40.153 E1.12631 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X20.707 Y38.739 ;WIPE_END G1 X23.293 Y45.92 Z1 F30000 G1 X25.51 Y52.078 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y54.52 E.10616 G1 X27.952 Y55.054 E.0164 G1 X25.146 Y52.248 E.12199 G1 X24.613 Y52.248 E.0164 G1 X27.952 Y55.587 E.14518 G1 X27.952 Y56.121 E.0164 G1 X24.079 Y52.248 E.16838 G1 X23.546 Y52.248 E.0164 G1 X27.952 Y56.654 E.19158 G1 X27.952 Y57.188 E.0164 G1 X22.842 Y52.078 E.22216 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X24.257 Y53.493 ;WIPE_END G1 X22.183 Y46.147 Z1 F30000 G1 X9.984 Y2.938 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X8.748 Y1.702 E.05375 G1 X8.748 Y2.235 E.0164 G1 X9.449 Y2.936 E.03046 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.169 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.552 Y-49.8 E2.07487 G1 X-39.552 Y-49.266 E.0164 G1 X7.466 Y-2.248 E2.0443 G1 X6.933 Y-2.248 E.0164 G1 X-39.552 Y-48.733 E2.0211 G1 X-39.552 Y-48.199 E.0164 G1 X6.399 Y-2.248 E1.9979 G1 X5.865 Y-2.248 E.0164 G1 X-39.552 Y-47.665 E1.9747 G1 X-39.552 Y-47.132 E.0164 G1 X5.332 Y-2.248 E1.9515 G1 X4.798 Y-2.248 E.0164 G1 X-39.552 Y-46.598 E1.9283 G1 X-39.552 Y-46.065 E.0164 G1 X-35.616 Y-42.129 E.17114 G2 X-36.23 Y-42.209 I-.613 J2.293 E.0191 G1 X-39.722 Y-45.701 E.15181 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.715 Y-40.228 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X4.265 Y-2.248 E1.65133 G1 X3.731 Y-2.248 E.0164 G1 X-15.676 Y-21.655 E.84381 G3 X-15.661 Y-21.107 I-3.347 J.366 E.01689 G1 X3.198 Y-2.248 E.81996 G1 X2.664 Y-2.248 E.0164 G1 X-15.731 Y-20.643 E.79981 G3 X-15.866 Y-20.244 I-4.36 J-1.243 E.01296 G1 X2.131 Y-2.248 E.78245 G1 X1.597 Y-2.248 E.0164 G1 X-16.05 Y-19.895 E.76726 G3 X-16.275 Y-19.586 I-1.285 J-.699 E.01178 G1 X1.063 Y-2.248 E.75383 G1 X.53 Y-2.248 E.0164 G1 X-16.538 Y-19.315 E.74207 G3 X-16.839 Y-19.083 I-1.033 J-1.028 E.01173 G1 X-.004 Y-2.248 E.73197 G1 X-.537 Y-2.248 E.0164 G1 X-17.18 Y-18.891 E.72362 G3 X-17.566 Y-18.744 I-.753 J-1.393 E.01275 G1 X-1.071 Y-2.248 E.71721 G1 X-1.604 Y-2.248 E.0164 G1 X-18.02 Y-18.664 E.71374 G3 X-18.543 Y-18.653 I-.294 J-1.596 E.01615 G1 X-1.968 Y-2.078 E.72066 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.383 Y-3.493 ;WIPE_END G1 X-8.282 Y-9.345 Z1 F30000 G1 X-33.561 Y-39.54 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.933 Y-23.912 E.6795 G1 X-17.957 Y-23.917 E.00076 G2 X-18.481 Y-23.927 I-.313 J2.609 E.01615 G1 X-33.409 Y-38.855 E.64906 G3 X-33.511 Y-38.423 I-1.693 J-.168 E.01369 G1 X-18.945 Y-23.857 E.63331 G2 X-19.344 Y-23.723 I1.244 J4.36 E.01296 G1 X-33.661 Y-38.039 E.62248 G3 X-33.852 Y-37.697 I-1.396 J-.555 E.01209 G1 X-19.693 Y-23.538 E.6156 G2 X-20.002 Y-23.314 I.699 J1.285 E.01178 G1 X-34.08 Y-37.392 E.6121 G3 X-34.343 Y-37.121 I-1.159 J-.864 E.01163 G1 X-20.273 Y-23.05 E.61177 G2 X-20.505 Y-22.749 I1.028 J1.033 E.01173 G1 X-34.641 Y-36.885 E.61462 G3 X-34.975 Y-36.686 I-.924 J-1.171 E.012 G1 X-20.697 Y-22.408 E.6208 G2 X-20.844 Y-22.022 I1.393 J.753 E.01275 G1 X-35.35 Y-36.527 E.6307 G3 X-35.773 Y-36.416 I-.633 J-1.549 E.01347 G1 X-20.932 Y-21.576 E.64526 G2 X-20.935 Y-21.045 I2.014 J.276 E.01636 G1 X-36.255 Y-36.365 E.66611 G3 X-36.843 Y-36.419 I.023 J-3.464 E.01817 G1 X-20.776 Y-20.352 E.69858 G2 X-19.236 Y-18.812 I2.44 J-.9 E.06908 G1 X-2.672 Y-2.248 E.7202 G1 X-3.205 Y-2.248 E.0164 G1 X-37.661 Y-36.704 E1.49811 G1 X-37.703 Y-36.725 E.00144 G1 X-37.934 Y-36.494 E.01004 G1 X-39.395 Y-37.955 E.06351 G1 X-39.438 Y-37.947 E.00135 G1 X-3.739 Y-2.248 E1.55217 G1 X-4.272 Y-2.248 E.0164 G1 X-39.552 Y-37.528 E1.53392 G1 X-39.552 Y-36.994 E.0164 G1 X-4.548 Y-1.99 E1.52193 G1 X-4.548 Y-1.457 E.0164 G1 X-39.552 Y-36.461 E1.52193 G1 X-39.552 Y-35.927 E.0164 G1 X-4.548 Y-.923 E1.52193 G1 X-4.548 Y-.39 E.0164 G1 X-39.552 Y-35.393 E1.52193 G1 X-39.552 Y-34.86 E.0164 G1 X-4.548 Y.144 E1.52193 G1 X-4.548 Y.677 E.0164 G1 X-39.552 Y-34.326 E1.52193 G1 X-39.552 Y-33.793 E.0164 G1 X-4.548 Y1.211 E1.52193 G1 X-4.548 Y1.745 E.0164 G1 X-39.552 Y-33.259 E1.52193 G1 X-39.552 Y-32.726 E.0164 G1 X-4.548 Y2.278 E1.52193 G1 X-4.548 Y2.812 E.0164 G1 X-39.552 Y-32.192 E1.52193 G1 X-39.552 Y-31.658 E.0164 G1 X-4.548 Y3.345 E1.52193 G1 X-4.548 Y3.879 E.0164 G1 X-39.552 Y-31.125 E1.52193 G1 X-39.552 Y-30.591 E.0164 G1 X-4.548 Y4.412 E1.52193 G1 X-4.548 Y4.946 E.0164 G1 X-39.552 Y-30.058 E1.52193 G1 X-39.552 Y-29.524 E.0164 M73 P16 R68 G1 X-4.548 Y5.48 E1.52193 G1 X-4.548 Y6.013 E.0164 G1 X-39.552 Y-28.991 E1.52193 G1 X-39.552 Y-28.457 E.0164 G1 X-4.548 Y6.547 E1.52193 G1 X-4.548 Y7.08 E.0164 G1 X-33.424 Y-21.796 E1.25551 G3 X-33.379 Y-21.217 I-3.256 J.547 E.01788 G1 X-4.548 Y7.614 E1.25353 G1 X-4.548 Y8.147 E.0164 G1 X-33.433 Y-20.737 E1.25588 G3 X-33.546 Y-20.317 I-1.652 J-.221 E.01341 G1 X-4.548 Y8.681 E1.26082 G1 X-4.548 Y9.215 E.0164 G1 X-33.707 Y-19.945 E1.26781 G3 X-33.908 Y-19.612 I-2.539 J-1.31 E.01195 G1 X-16.544 Y-2.248 E.75498 G1 X-16.052 Y-2.248 E.01514 G1 X-16.052 Y-1.756 E.01514 G1 X-4.548 Y9.748 E.50017 G1 X-4.548 Y10.282 E.0164 G1 X-16.052 Y-1.222 E.50017 G1 X-16.052 Y-.689 E.0164 G1 X-4.548 Y10.815 E.50017 G1 X-4.548 Y11.349 E.0164 G1 X-16.052 Y-.155 E.50017 G1 X-16.052 Y.379 E.0164 G1 X-4.548 Y11.882 E.50017 G1 X-4.548 Y12.416 E.0164 G1 X-16.052 Y.912 E.50017 G1 X-16.052 Y1.446 E.0164 G1 X-4.548 Y12.95 E.50017 G1 X-4.548 Y13.483 E.0164 G1 X-16.052 Y1.979 E.50017 G1 X-16.052 Y2.513 E.0164 G1 X21.952 Y40.517 E1.65237 G1 X21.952 Y41.05 E.0164 G1 X-16.052 Y3.046 E1.65237 G1 X-16.052 Y3.58 E.0164 G1 X4.12 Y23.752 E.87705 G1 X3.586 Y23.752 E.0164 G1 X-16.052 Y4.114 E.85385 G1 X-16.052 Y4.647 E.0164 G1 X3.053 Y23.752 E.83065 G1 X2.519 Y23.752 E.0164 G1 X-16.052 Y5.181 E.80746 G1 X-16.052 Y5.714 E.0164 G1 X1.986 Y23.752 E.78426 G1 X1.452 Y23.752 E.0164 G1 X-16.052 Y6.248 E.76106 G1 X-16.052 Y6.781 E.0164 M73 P16 R67 G1 X.919 Y23.752 E.73786 G1 X.385 Y23.752 E.0164 G1 X-16.052 Y7.315 E.71466 G1 X-16.052 Y7.849 E.0164 G1 X-.149 Y23.752 E.69146 G1 X-.682 Y23.752 E.0164 G1 X-16.052 Y8.382 E.66826 G1 X-16.052 Y8.916 E.0164 G1 X-1.216 Y23.752 E.64506 G1 X-1.749 Y23.752 E.0164 G1 X-16.052 Y9.449 E.62186 G1 X-16.052 Y9.983 E.0164 G1 X-2.283 Y23.752 E.59867 G1 X-2.816 Y23.752 E.0164 G1 X-16.052 Y10.516 E.57547 G1 X-16.052 Y11.05 E.0164 G1 X-3.35 Y23.752 E.55227 G1 X-3.884 Y23.752 E.0164 G1 X-16.052 Y11.584 E.52907 G1 X-16.052 Y12.117 E.0164 G1 X-4.417 Y23.752 E.50587 G1 X-4.951 Y23.752 E.0164 G1 X-16.052 Y12.651 E.48267 G1 X-16.052 Y13.184 E.0164 G1 X-5.484 Y23.752 E.45947 G1 X-6.018 Y23.752 E.0164 G1 X-16.052 Y13.718 E.43627 G1 X-16.055 Y14.248 E.0163 G1 X-6.551 Y23.752 E.41321 G1 X-7.085 Y23.752 E.0164 G1 X-16.589 Y14.248 E.41321 G1 X-17.122 Y14.248 E.0164 G1 X-7.618 Y23.752 E.41321 G1 X-8.152 Y23.752 E.0164 G1 X-17.656 Y14.248 E.41321 G1 X-18.189 Y14.248 E.0164 G1 X-8.686 Y23.752 E.41321 G1 X-9.219 Y23.752 E.0164 G1 X-18.723 Y14.248 E.41321 G1 X-19.257 Y14.248 E.0164 G1 X-9.753 Y23.752 E.41321 G1 X-10.286 Y23.752 E.0164 G1 X-19.79 Y14.248 E.41321 G1 X-20.324 Y14.248 E.0164 G1 X-10.82 Y23.752 E.41321 G1 X-11.353 Y23.752 E.0164 G1 X-20.857 Y14.248 E.41321 G1 X-21.391 Y14.248 E.0164 G1 X-11.887 Y23.752 E.41321 G1 X-12.421 Y23.752 E.0164 G1 X-21.924 Y14.248 E.41321 G1 X-22.458 Y14.248 E.0164 G1 X-12.954 Y23.752 E.41321 G1 X-13.488 Y23.752 E.0164 G1 X-22.992 Y14.248 E.41321 G1 X-23.525 Y14.248 E.0164 G1 X-14.021 Y23.752 E.41321 G1 X-14.555 Y23.752 E.0164 G1 X-24.059 Y14.248 E.41321 G1 X-24.592 Y14.248 E.0164 G1 X-15.088 Y23.752 E.41321 G1 X-15.622 Y23.752 E.0164 G1 X-25.126 Y14.248 E.41321 G1 X-25.659 Y14.248 E.0164 G1 X-16.156 Y23.752 E.41321 G1 X-16.689 Y23.752 E.0164 G1 X-26.193 Y14.248 E.41321 G1 X-26.726 Y14.248 E.0164 G1 X-17.223 Y23.752 E.41321 G1 X-17.756 Y23.752 E.0164 G1 X-27.26 Y14.248 E.41321 G1 X-27.794 Y14.248 E.0164 G1 X-18.29 Y23.752 E.41321 G1 X-18.823 Y23.752 E.0164 G1 X-28.497 Y14.078 E.42059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y9.662 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-31.097 Y7.744 E.0834 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-29.682 Y9.158 ;WIPE_END G1 X-23.951 Y4.117 Z1 F30000 G1 X-16.908 Y-2.078 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-34.146 Y-19.316 E.74948 G3 X-34.418 Y-19.055 I-1.128 J-.904 E.01164 G1 X-17.611 Y-2.248 E.73075 G1 X-18.145 Y-2.248 E.0164 G1 X-34.726 Y-18.829 E.72091 G3 X-35.07 Y-18.639 I-.891 J-1.213 E.01211 G1 X-18.679 Y-2.248 E.71268 G1 X-19.212 Y-2.248 E.0164 G1 X-35.456 Y-18.492 E.70625 G3 X-35.89 Y-18.393 I-.592 J-1.602 E.01375 G1 X-19.746 Y-2.248 E.70196 G1 X-20.279 Y-2.248 E.0164 G1 X-36.4 Y-18.369 E.70091 G3 X-37.019 Y-18.454 I.015 J-2.395 E.01927 G1 X-20.813 Y-2.248 E.70463 G1 X-21.346 Y-2.248 E.0164 G1 X-38.033 Y-18.935 E.72553 G1 X-38.045 Y-18.942 E.00042 G1 X-38.279 Y-18.708 E.0102 G1 X-39.507 Y-19.936 E.0534 G1 X-39.552 Y-19.929 E.00139 G1 X-21.88 Y-2.248 E.76854 G1 X-22.414 Y-2.248 E.0164 G1 X-39.552 Y-19.386 E.74516 G1 X-39.552 Y-18.853 E.0164 G1 X-22.947 Y-2.248 E.72196 G1 X-23.481 Y-2.248 E.0164 G1 X-39.552 Y-18.319 E.69876 G1 X-39.552 Y-17.786 E.0164 G1 X-24.014 Y-2.248 E.67556 G1 X-24.548 Y-2.248 E.0164 G1 X-39.552 Y-17.252 E.65236 G1 X-39.552 Y-16.719 E.0164 G1 X-25.081 Y-2.248 E.62916 G1 X-25.615 Y-2.248 E.0164 G1 X-39.552 Y-16.185 E.60596 G1 X-39.552 Y-15.651 E.0164 G1 X-26.149 Y-2.248 E.58276 G1 X-26.682 Y-2.248 E.0164 G1 X-39.552 Y-15.118 E.55956 G1 X-39.552 Y-14.584 E.0164 G1 X-27.216 Y-2.248 E.53637 G1 X-27.749 Y-2.248 E.0164 G1 X-39.552 Y-14.051 E.51317 G1 X-39.552 Y-13.517 E.0164 G1 X-28.283 Y-2.248 E.48997 G1 X-28.816 Y-2.248 E.0164 G1 X-39.552 Y-12.984 E.46677 G1 X-39.552 Y-12.45 E.0164 G1 X-29.348 Y-2.246 E.44365 G1 X-29.348 Y-1.713 E.0164 G1 X-39.552 Y-11.916 E.44365 G1 X-39.552 Y-11.383 E.0164 G1 X-29.348 Y-1.179 E.44365 G1 X-29.348 Y-.646 E.0164 G1 X-39.552 Y-10.849 E.44365 G1 X-39.552 Y-10.316 E.0164 G1 X-29.348 Y-.112 E.44365 G1 X-29.348 Y.422 E.0164 G1 X-39.552 Y-9.782 E.44365 G1 X-39.552 Y-9.249 E.0164 G1 X-29.348 Y.955 E.44365 G1 X-29.348 Y1.489 E.0164 G1 X-39.552 Y-8.715 E.44365 G1 X-39.552 Y-8.182 E.0164 G1 X-29.348 Y2.022 E.44365 G1 X-29.348 Y2.556 E.0164 G1 X-39.552 Y-7.648 E.44365 G1 X-39.552 Y-7.114 E.0164 G1 X-29.59 Y2.848 E.43314 G2 X-30.216 Y2.755 I-.798 J3.219 E.01951 G1 X-39.552 Y-6.581 E.4059 G1 X-39.552 Y-6.047 E.0164 G1 X-30.718 Y2.786 E.38407 G2 X-31.145 Y2.893 I.194 J1.673 E.01356 G1 X-39.552 Y-5.514 E.36553 G1 X-39.552 Y-4.98 E.0164 G1 X-31.52 Y3.052 E.34924 G2 X-31.851 Y3.255 I.604 J1.358 E.01196 G1 X-39.857 Y-4.752 E.34812 G3 X-40.373 Y-4.734 I-.317 J-1.728 E.01593 G1 X-32.142 Y3.497 E.3579 G2 X-32.395 Y3.777 I.938 J1.102 E.01165 G1 X-40.907 Y-4.734 E.37008 G1 X-41.44 Y-4.734 E.0164 G1 X-32.607 Y4.099 E.38405 G2 X-32.776 Y4.464 I1.304 J.821 E.0124 G1 X-41.974 Y-4.734 E.39994 G1 X-42.508 Y-4.734 E.0164 G1 X-32.893 Y4.88 E.41801 G2 X-32.948 Y5.359 I1.791 J.447 E.01486 G1 X-43.041 Y-4.734 E.43884 G1 X-43.575 Y-4.734 E.0164 G1 X-32.644 Y6.197 E.47527 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y10.195 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-44.108 Y-4.734 E.64913 G1 X-44.642 Y-4.734 E.0164 G1 X-29.348 Y10.559 E.66496 G1 X-29.348 Y11.093 E.0164 G1 X-45.175 Y-4.734 E.68815 G1 X-45.709 Y-4.734 E.0164 G1 X-29.348 Y11.626 E.71135 G1 X-29.348 Y12.16 E.0164 G1 X-46.243 Y-4.734 E.73455 G1 X-46.776 Y-4.734 E.0164 G1 X-29.348 Y12.694 E.75775 G1 X-29.348 Y13.227 E.0164 G1 X-43.831 Y-1.256 E.62971 G3 X-43.62 Y-.511 I-2.315 J1.059 E.0239 G1 X-29.348 Y13.761 E.62052 G1 X-29.348 Y14.248 E.01498 G1 X-28.861 Y14.248 E.01498 G1 X-19.357 Y23.752 E.41321 G1 X-19.891 Y23.752 E.0164 G1 X-43.579 Y.064 E1.02993 G3 X-43.626 Y.55 I-2.493 J.004 E.01505 G1 X-20.424 Y23.752 E1.00878 G1 X-20.958 Y23.752 E.0164 G1 X-43.73 Y.98 E.99011 G3 X-43.881 Y1.362 I-2.016 J-.578 E.01266 G1 X-21.491 Y23.752 E.9735 G1 X-22.025 Y23.752 E.0164 G1 X-44.069 Y1.708 E.95845 G3 X-44.289 Y2.021 I-1.7 J-.962 E.01179 G1 X-22.558 Y23.752 E.94483 G1 X-23.092 Y23.752 E.0164 G1 X-44.543 Y2.301 E.93266 G3 X-44.829 Y2.548 I-1.398 J-1.331 E.01165 G1 X-23.626 Y23.752 E.92192 G1 X-24.159 Y23.752 E.0164 G1 X-45.147 Y2.764 E.91253 G3 X-45.498 Y2.947 I-1.103 J-1.689 E.01218 G1 X-24.693 Y23.752 E.90458 G1 X-25.226 Y23.752 E.0164 G1 X-45.887 Y3.091 E.89829 G3 X-46.326 Y3.186 I-.698 J-2.183 E.01384 G1 X-25.548 Y23.964 E.9034 G1 X-25.548 Y24.497 E.0164 G1 X-46.822 Y3.224 E.92495 G3 X-47.414 Y3.165 I.002 J-3.036 E.01833 G1 X-25.548 Y25.031 E.9507 G1 X-25.548 Y25.564 E.0164 G1 X-48.222 Y2.89 E.98585 G3 X-48.552 Y2.705 I.775 J-1.766 E.01164 G1 X-48.552 Y3.094 E.01196 G1 X-25.548 Y26.098 E1.00018 G1 X-25.548 Y26.631 E.0164 G1 X-48.552 Y3.628 E1.00018 G1 X-48.552 Y4.161 E.0164 G1 X-25.548 Y27.165 E1.00018 G1 X-25.548 Y27.699 E.0164 G1 X-48.552 Y4.695 E1.00018 G1 X-48.552 Y5.228 E.0164 G1 X-25.548 Y28.232 E1.00018 G1 X-25.548 Y28.766 E.0164 G1 X-48.552 Y5.762 E1.00018 G1 X-48.552 Y6.295 E.0164 G1 X-25.548 Y29.299 E1.00018 G1 X-25.548 Y29.833 E.0164 G1 X-48.552 Y6.829 E1.00018 G1 X-48.552 Y7.363 E.0164 G1 X-25.548 Y30.366 E1.00018 G1 X-25.548 Y30.9 E.0164 G1 X-48.552 Y7.896 E1.00018 G1 X-48.552 Y8.43 E.0164 G1 X-25.548 Y31.434 E1.00018 G1 X-25.548 Y31.967 E.0164 G1 X-48.552 Y8.963 E1.00018 G1 X-48.552 Y9.497 E.0164 G1 X-25.548 Y32.501 E1.00018 G1 X-25.548 Y33.034 E.0164 G1 X-48.552 Y10.03 E1.00018 G1 X-48.552 Y10.564 E.0164 G1 X-25.378 Y33.737 E1.00756 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-26.793 Y32.323 ;WIPE_END G1 X-19.389 Y30.468 Z1 F30000 G1 X4.778 Y24.41 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.952 Y41.584 E.74668 G1 X21.952 Y42.117 E.0164 G1 X4.948 Y25.114 E.73931 G1 X4.948 Y25.647 E.0164 G1 X21.952 Y42.651 E.73931 G1 X21.952 Y43.185 E.0164 G1 X4.948 Y26.181 E.73931 G1 X4.948 Y26.714 E.0164 G1 X21.952 Y43.718 E.73931 G1 X21.952 Y44.252 E.0164 G1 X4.948 Y27.248 E.73931 G1 X4.948 Y27.781 E.0164 G1 X21.952 Y44.785 E.73931 G1 X21.952 Y45.319 E.0164 G1 X4.948 Y28.315 E.73931 G1 X4.948 Y28.849 E.0164 G1 X21.952 Y45.852 E.73931 G1 X21.952 Y46.386 E.0164 G1 X4.948 Y29.382 E.73931 G1 X4.948 Y29.916 E.0164 G1 X21.952 Y46.919 E.73931 G1 X21.952 Y47.453 E.0164 G1 X4.948 Y30.449 E.73931 G1 X4.948 Y30.983 E.0164 G1 X21.952 Y47.987 E.73931 G1 X21.952 Y48.52 E.0164 G1 X4.948 Y31.516 E.73931 G1 X4.948 Y32.05 E.0164 G1 X21.952 Y49.054 E.73931 G1 X21.952 Y49.587 E.0164 G1 X4.948 Y32.584 E.73931 G1 X4.948 Y33.117 E.0164 G1 X21.952 Y50.121 E.73931 G1 X21.952 Y50.654 E.0164 G1 X4.948 Y33.651 E.73931 G1 X4.948 Y34.184 E.0164 G1 X22.122 Y51.358 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y57.891 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X22.478 Y52.248 E.24536 G1 X21.952 Y52.248 E.01619 G1 X21.952 Y51.722 E.01619 G1 X4.478 Y34.248 E.75973 G1 X3.945 Y34.248 E.0164 G1 X27.952 Y58.255 E1.0438 G1 X27.952 Y58.789 E.0164 G1 X3.411 Y34.248 E1.067 G1 X2.878 Y34.248 E.0164 G1 X25.163 Y56.534 E.96895 G3 X26.666 Y58.037 I-.936 J2.439 E.06731 G1 X27.952 Y59.322 E.05589 G1 X27.952 Y59.34 E.00055 G1 X27.688 Y59.473 E.00909 G1 X27.58 Y59.484 E.00333 G1 X26.834 Y58.738 E.03245 G3 X26.833 Y59.271 I-2.025 J.264 E.01643 G1 X27.251 Y59.689 E.01819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.665 Y56.568 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X2.344 Y34.248 E.97047 G1 X1.811 Y34.248 E.0164 G1 X23.929 Y56.367 E.9617 G2 X23.48 Y56.451 I.452 J3.656 E.01407 G1 X1.277 Y34.248 E.96536 G1 X.743 Y34.248 E.0164 G1 X4.247 Y37.752 E.15234 G1 X3.714 Y37.752 E.0164 G1 X.21 Y34.248 E.15234 G1 X-.324 Y34.248 E.0164 G1 X3.18 Y37.752 E.15234 G1 X2.647 Y37.752 E.0164 G1 X-.857 Y34.248 E.15234 G1 X-1.391 Y34.248 E.0164 G1 X2.113 Y37.752 E.15234 G1 X1.579 Y37.752 E.0164 G1 X-1.924 Y34.248 E.15234 G1 X-2.458 Y34.248 E.0164 G1 X1.046 Y37.752 E.15234 G1 X.512 Y37.752 E.0164 G1 X-2.992 Y34.248 E.15234 G1 X-3.525 Y34.248 E.0164 G1 X-.021 Y37.752 E.15234 G1 X-.555 Y37.752 E.0164 G1 X-4.059 Y34.248 E.15234 G1 X-4.592 Y34.248 E.0164 G1 X-1.088 Y37.752 E.15234 G1 X-1.622 Y37.752 E.0164 G1 X-5.126 Y34.248 E.15234 G1 X-5.659 Y34.248 E.0164 G1 X-2.156 Y37.752 E.15234 G1 X-2.689 Y37.752 E.0164 G1 X-6.193 Y34.248 E.15234 G1 X-6.726 Y34.248 E.0164 G1 X-3.223 Y37.752 E.15234 G1 X-3.756 Y37.752 E.0164 G1 X-7.26 Y34.248 E.15234 G1 X-7.794 Y34.248 E.0164 G1 X-4.29 Y37.752 E.15234 G1 X-4.823 Y37.752 E.0164 G1 X-8.327 Y34.248 E.15234 G1 X-8.861 Y34.248 E.0164 G1 X-5.357 Y37.752 E.15234 G1 X-5.891 Y37.752 E.0164 G1 X-9.394 Y34.248 E.15234 G1 X-9.928 Y34.248 E.0164 G1 X-6.424 Y37.752 E.15234 G1 X-6.958 Y37.752 E.0164 G1 X-10.461 Y34.248 E.15234 G1 X-10.995 Y34.248 E.0164 G1 X-7.491 Y37.752 E.15234 G1 X-8.025 Y37.752 E.0164 G1 X-11.529 Y34.248 E.15234 G1 X-12.062 Y34.248 E.0164 G1 X-8.558 Y37.752 E.15234 G1 X-9.092 Y37.752 E.0164 G1 X-12.596 Y34.248 E.15234 G1 X-13.129 Y34.248 E.0164 G1 X-9.625 Y37.752 E.15234 G1 X-10.159 Y37.752 E.0164 G1 X-13.663 Y34.248 E.15234 G1 X-14.196 Y34.248 E.0164 G1 X-10.693 Y37.752 E.15234 G1 X-11.226 Y37.752 E.0164 G1 X-14.73 Y34.248 E.15234 G1 X-15.264 Y34.248 E.0164 G1 X-11.76 Y37.752 E.15234 G1 X-12.293 Y37.752 E.0164 G1 X-15.797 Y34.248 E.15234 G1 X-16.331 Y34.248 E.0164 G1 X-12.827 Y37.752 E.15234 G1 X-13.36 Y37.752 E.0164 G1 X-16.864 Y34.248 E.15234 G1 X-17.398 Y34.248 E.0164 G1 X-13.894 Y37.752 E.15234 G1 X-14.428 Y37.752 E.0164 G1 X-17.931 Y34.248 E.15234 G1 X-18.465 Y34.248 E.0164 G1 X-14.961 Y37.752 E.15234 G1 X-15.495 Y37.752 E.0164 G1 X-18.999 Y34.248 E.15234 G1 X-19.532 Y34.248 E.0164 G1 X-16.028 Y37.752 E.15234 G1 X-16.562 Y37.752 E.0164 G1 X-20.066 Y34.248 E.15234 G1 X-20.599 Y34.248 E.0164 G1 X-17.095 Y37.752 E.15234 G1 X-17.629 Y37.752 E.0164 G1 X-21.133 Y34.248 E.15234 G1 X-21.666 Y34.248 E.0164 G1 X-18.163 Y37.752 E.15234 G1 X-18.696 Y37.752 E.0164 G1 X-22.2 Y34.248 E.15234 G1 X-22.733 Y34.248 E.0164 G1 X-19.23 Y37.752 E.15234 G1 X-19.763 Y37.752 E.0164 G1 X-23.267 Y34.248 E.15234 G1 X-23.801 Y34.248 E.0164 G1 X-20.297 Y37.752 E.15234 G1 X-20.83 Y37.752 E.0164 G1 X-24.334 Y34.248 E.15234 G1 X-24.868 Y34.248 E.0164 G1 X-21.364 Y37.752 E.15234 G1 X-21.898 Y37.752 E.0164 G1 X-48.552 Y11.098 E1.1589 G1 X-48.552 Y11.631 E.0164 G1 X-22.431 Y37.752 E1.1357 G1 X-22.965 Y37.752 E.0164 G1 X-42.552 Y18.165 E.85163 G1 X-42.552 Y17.752 E.01269 G1 X-42.965 Y17.752 E.01269 G1 X-48.552 Y12.165 E.24293 G1 X-48.552 Y12.698 E.0164 G1 X-43.498 Y17.752 E.21973 G1 X-44.032 Y17.752 E.0164 G1 X-48.552 Y13.232 E.19653 G1 X-48.552 Y13.765 E.0164 G1 X-44.565 Y17.752 E.17333 G1 X-45.099 Y17.752 E.0164 G1 X-48.552 Y14.299 E.15013 G1 X-48.552 Y14.833 E.0164 G1 X-45.633 Y17.752 E.12693 G1 X-46.166 Y17.752 E.0164 G1 X-48.552 Y15.366 E.10373 G1 X-48.552 Y15.9 E.0164 G1 X-46.7 Y17.752 E.08053 G1 X-47.233 Y17.752 E.0164 G1 X-48.552 Y16.433 E.05733 G1 X-48.552 Y16.967 E.0164 G1 X-47.807 Y17.711 E.03237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y18.529 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-23.498 Y37.752 E.83581 G1 X-24.032 Y37.752 E.0164 G1 X-42.552 Y19.232 E.80523 G1 X-42.552 Y19.765 E.0164 G1 X-24.565 Y37.752 E.78203 G1 X-25.099 Y37.752 E.0164 G1 X-42.552 Y20.299 E.75884 G1 X-42.552 Y20.833 E.0164 G1 X-25.548 Y37.836 E.73931 G1 X-25.548 Y38.37 E.0164 G1 X-42.552 Y21.366 E.73931 G1 X-42.552 Y21.9 E.0164 G1 X-25.548 Y38.903 E.73931 G1 X-25.548 Y39.437 E.0164 G1 X-42.552 Y22.433 E.73931 G1 X-42.552 Y22.967 E.0164 G1 X-25.548 Y39.971 E.73931 G1 X-25.548 Y40.504 E.0164 G1 X-42.552 Y23.5 E.73931 G1 X-42.552 Y24.034 E.0164 G1 X-25.548 Y41.038 E.73931 G1 X-25.548 Y41.571 E.0164 G1 X-42.552 Y24.567 E.73931 G1 X-42.552 Y25.101 E.0164 G1 X-25.548 Y42.105 E.73931 G1 X-25.548 Y42.638 E.0164 G1 X-42.552 Y25.635 E.73931 G1 X-42.552 Y26.168 E.0164 G1 X-25.548 Y43.172 E.73931 G1 X-25.548 Y43.706 E.0164 G1 X-42.552 Y26.702 E.73931 G1 X-42.552 Y27.235 E.0164 G1 X-25.548 Y44.239 E.73931 G1 X-25.548 Y44.773 E.0164 G1 X-42.552 Y27.769 E.73931 G1 X-42.552 Y28.302 E.0164 G1 X-25.548 Y45.306 E.73931 G1 X-25.548 Y45.84 E.0164 G1 X-42.552 Y28.836 E.73931 G1 X-42.552 Y29.37 E.0164 G1 X-25.548 Y46.373 E.73931 G1 X-25.548 Y46.907 E.0164 G1 X-42.552 Y29.903 E.73931 G1 X-42.552 Y30.437 E.0164 G1 X-25.378 Y47.61 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-26.793 Y46.196 ;WIPE_END G1 X-19.389 Y44.34 Z1 F30000 G1 X4.778 Y38.283 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X23.092 Y56.597 E.79627 G2 X22.75 Y56.788 I.554 J1.397 E.01209 G1 X4.948 Y38.986 E.77399 G1 X4.948 Y39.52 E.0164 G1 X22.447 Y57.019 E.76084 G2 X22.183 Y57.288 I.891 J1.138 E.01163 G1 X4.948 Y40.053 E.74935 G1 X4.948 Y40.587 E.0164 G1 X21.957 Y57.596 E.73953 G2 X21.772 Y57.944 I1.229 J.878 E.01216 G1 X4.948 Y41.121 E.73146 G1 X4.948 Y41.654 E.0164 G1 X21.634 Y58.34 E.7255 G2 X21.562 Y58.802 I1.717 J.505 E.0144 G1 X4.948 Y42.188 E.72236 G1 X4.948 Y42.721 E.0164 G1 X21.572 Y59.346 E.72281 G2 X21.662 Y59.752 I1.587 J-.139 E.01282 G1 X21.445 Y59.752 E.00666 G1 X4.948 Y43.255 E.71727 G1 X4.948 Y43.788 E.0164 G1 X20.912 Y59.752 E.69407 G1 X20.378 Y59.752 E.0164 G1 X4.948 Y44.322 E.67088 G1 X4.948 Y44.856 E.0164 G1 X19.844 Y59.752 E.64768 G1 X19.311 Y59.752 E.0164 G1 X4.948 Y45.389 E.62448 G1 X4.948 Y45.923 E.0164 G1 X18.777 Y59.752 E.60128 G1 X18.244 Y59.752 E.0164 G1 X4.948 Y46.456 E.57808 G1 X4.948 Y46.99 E.0164 G1 X17.71 Y59.752 E.55488 G1 X17.177 Y59.752 E.0164 G1 X4.948 Y47.523 E.53168 G1 X4.948 Y48.057 E.0164 G1 X16.643 Y59.752 E.50848 G1 X16.109 Y59.752 E.0164 G1 X4.606 Y48.248 E.50017 G1 X4.072 Y48.248 E.0164 G1 X15.576 Y59.752 E.50017 G1 X15.042 Y59.752 E.0164 G1 X3.539 Y48.248 E.50017 G1 X3.005 Y48.248 E.0164 G1 X14.509 Y59.752 E.50017 G1 X13.975 Y59.752 E.0164 G1 X2.471 Y48.248 E.50017 G1 X1.938 Y48.248 E.0164 G1 X13.442 Y59.752 E.50017 G1 X12.908 Y59.752 E.0164 G1 X1.404 Y48.248 E.50017 G1 X.871 Y48.248 E.0164 G1 X12.374 Y59.752 E.50017 G1 X11.841 Y59.752 E.0164 G1 X.337 Y48.248 E.50017 G1 X-.196 Y48.248 E.0164 G1 X11.307 Y59.752 E.50017 G1 X10.774 Y59.752 E.0164 G1 X-.73 Y48.248 E.50017 G1 X-1.264 Y48.248 E.0164 G1 X10.24 Y59.752 E.50017 G1 X9.707 Y59.752 E.0164 G1 X-1.797 Y48.248 E.50017 G1 X-2.331 Y48.248 E.0164 G1 X9.173 Y59.752 E.50017 G1 X8.64 Y59.752 E.0164 G1 X-2.864 Y48.248 E.50017 G1 X-3.398 Y48.248 E.0164 G1 X8.106 Y59.752 E.50017 G1 X7.572 Y59.752 E.0164 G1 X-3.931 Y48.248 E.50017 G1 X-4.465 Y48.248 E.0164 G1 X7.039 Y59.752 E.50017 G1 X6.505 Y59.752 E.0164 G1 X-4.999 Y48.248 E.50017 G1 X-5.532 Y48.248 E.0164 G1 X5.972 Y59.752 E.50017 G1 X5.438 Y59.752 E.0164 G1 X-6.066 Y48.248 E.50017 G1 X-6.599 Y48.248 E.0164 G1 X4.905 Y59.752 E.50017 G1 X4.371 Y59.752 E.0164 G1 X-7.133 Y48.248 E.50017 G1 X-7.666 Y48.248 E.0164 G1 X3.837 Y59.752 E.50017 G1 X3.304 Y59.752 E.0164 G1 X-8.2 Y48.248 E.50017 G1 X-8.733 Y48.248 E.0164 G1 X2.77 Y59.752 E.50017 G1 X2.237 Y59.752 E.0164 G1 X-9.267 Y48.248 E.50017 G1 X-9.801 Y48.248 E.0164 G1 X1.703 Y59.752 E.50017 G1 X1.17 Y59.752 E.0164 G1 X-10.334 Y48.248 E.50017 G1 X-10.868 Y48.248 E.0164 G1 X.636 Y59.752 E.50017 G1 X.102 Y59.752 E.0164 G1 X-11.401 Y48.248 E.50017 G1 X-11.935 Y48.248 E.0164 G1 X-.431 Y59.752 E.50017 G1 X-.965 Y59.752 E.0164 G1 X-12.468 Y48.248 E.50017 G1 X-13.002 Y48.248 E.0164 G1 X-1.498 Y59.752 E.50017 G1 X-2.032 Y59.752 E.0164 G1 X-13.536 Y48.248 E.50017 G1 X-14.069 Y48.248 E.0164 G1 X-2.565 Y59.752 E.50017 G1 X-3.099 Y59.752 E.0164 G1 X-14.603 Y48.248 E.50017 G1 X-15.136 Y48.248 E.0164 G1 X-3.633 Y59.752 E.50017 G1 X-4.166 Y59.752 E.0164 G1 X-15.67 Y48.248 E.50017 G1 X-16.203 Y48.248 E.0164 G1 X-4.7 Y59.752 E.50017 G1 X-5.233 Y59.752 E.0164 G1 X-16.737 Y48.248 E.50017 G1 X-17.271 Y48.248 E.0164 G1 X-5.767 Y59.752 E.50017 G1 X-6.3 Y59.752 E.0164 G1 X-17.804 Y48.248 E.50017 G1 X-18.338 Y48.248 E.0164 G1 X-6.834 Y59.752 E.50017 G1 X-7.367 Y59.752 E.0164 G1 X-18.871 Y48.248 E.50017 G1 X-19.405 Y48.248 E.0164 G1 X-7.901 Y59.752 E.50017 G1 X-8.435 Y59.752 E.0164 G1 X-19.938 Y48.248 E.50017 G1 X-20.472 Y48.248 E.0164 G1 X-8.968 Y59.752 E.50017 G1 X-9.502 Y59.752 E.0164 G1 X-21.006 Y48.248 E.50017 G1 X-21.539 Y48.248 E.0164 G1 X-10.035 Y59.752 E.50017 G1 X-10.569 Y59.752 E.0164 G1 X-22.073 Y48.248 E.50017 G1 X-22.606 Y48.248 E.0164 G1 X-11.102 Y59.752 E.50017 G1 X-11.636 Y59.752 E.0164 G1 X-23.14 Y48.248 E.50017 G1 X-23.673 Y48.248 E.0164 G1 X-12.17 Y59.752 E.50017 G1 X-12.703 Y59.752 E.0164 G1 X-24.207 Y48.248 E.50017 G1 X-24.741 Y48.248 E.0164 G1 X-13.237 Y59.752 E.50017 G1 X-13.77 Y59.752 E.0164 G1 X-42.552 Y30.97 E1.25139 G1 X-42.552 Y31.504 E.0164 G1 X-14.304 Y59.752 E1.2282 G1 X-14.837 Y59.752 E.0164 G1 X-42.552 Y32.037 E1.205 G1 X-42.552 Y32.248 E.00648 G1 X-42.875 Y32.248 E.00993 G1 X-15.371 Y59.752 E1.19584 G1 X-15.905 Y59.752 E.0164 G1 X-43.408 Y32.248 E1.19584 G1 X-43.942 Y32.248 E.0164 G1 X-16.438 Y59.752 E1.19584 G1 X-16.972 Y59.752 E.0164 G1 X-44.475 Y32.248 E1.19584 G1 X-45.009 Y32.248 E.0164 G1 X-17.505 Y59.752 E1.19584 G1 X-18.039 Y59.752 E.0164 G1 X-45.543 Y32.248 E1.19584 G1 X-46.076 Y32.248 E.0164 G1 X-18.572 Y59.752 E1.19584 G1 X-19.106 Y59.752 E.0164 G1 X-46.61 Y32.248 E1.19584 G1 X-47.143 Y32.248 E.0164 G1 X-19.64 Y59.752 E1.19584 G1 X-20.173 Y59.752 E.0164 G1 X-47.677 Y32.248 E1.19584 G1 X-47.838 Y32.248 E.00496 G1 X-47.838 Y32.452 E.00626 G1 X-48.007 Y32.452 E.00519 G1 X-20.707 Y59.752 E1.18699 G1 X-21.24 Y59.752 E.0164 G1 X-42.552 Y38.44 E.92661 G1 X-42.552 Y38.974 E.0164 G1 X-21.774 Y59.752 E.90341 G1 X-22.307 Y59.752 E.0164 G1 X-42.552 Y39.507 E.88021 G1 X-42.552 Y40.041 E.0164 G1 X-22.841 Y59.752 E.85701 G1 X-23.375 Y59.752 E.0164 G1 X-42.552 Y40.575 E.83381 G1 X-42.552 Y41.108 E.0164 G1 X-23.908 Y59.752 E.81061 G1 X-24.442 Y59.752 E.0164 G1 X-42.552 Y41.642 E.78741 G1 X-42.552 Y42.175 E.0164 G1 X-24.975 Y59.752 E.76422 G1 X-25.509 Y59.752 E.0164 G1 X-42.552 Y42.709 E.74102 G1 X-42.552 Y43.242 E.0164 G1 X-26.042 Y59.752 E.71782 G1 X-26.576 Y59.752 E.0164 G1 X-42.552 Y43.776 E.69462 G1 X-42.552 Y44.309 E.0164 G1 X-27.109 Y59.752 E.67142 G1 X-27.643 Y59.752 E.0164 G1 X-42.552 Y44.843 E.64822 G1 X-42.552 Y45.377 E.0164 G1 X-28.177 Y59.752 E.62502 G1 X-28.71 Y59.752 E.0164 G1 X-42.552 Y45.91 E.60182 G1 X-42.552 Y46.444 E.0164 G1 X-29.244 Y59.752 E.57862 G1 X-29.777 Y59.752 E.0164 G1 X-42.552 Y46.977 E.55543 G1 X-42.552 Y47.511 E.0164 G1 X-30.311 Y59.752 E.53223 G1 X-30.844 Y59.752 E.0164 G1 X-42.552 Y48.044 E.50903 G1 X-42.552 Y48.578 E.0164 G1 X-31.378 Y59.752 E.48583 G1 X-31.912 Y59.752 E.0164 G1 X-42.552 Y49.112 E.46263 G1 X-42.552 Y49.645 E.0164 G1 X-32.445 Y59.752 E.43943 G1 X-32.979 Y59.752 E.0164 G1 X-42.552 Y50.179 E.41623 G1 X-42.552 Y50.712 E.0164 G1 X-33.512 Y59.752 E.39303 G1 X-34.046 Y59.752 E.0164 G1 X-42.552 Y51.246 E.36983 G1 X-42.552 Y51.779 E.0164 G1 X-34.579 Y59.752 E.34663 G1 X-35.113 Y59.752 E.0164 M73 P17 R67 G1 X-42.617 Y52.248 E.32626 G1 X-43.15 Y52.248 E.0164 G1 X-35.647 Y59.752 E.32626 G1 X-36.18 Y59.752 E.0164 G1 X-43.684 Y52.248 E.32626 G1 X-44.217 Y52.248 E.0164 G1 X-36.714 Y59.752 E.32626 G1 X-37.247 Y59.752 E.0164 G1 X-44.751 Y52.248 E.32626 G1 X-45.285 Y52.248 E.0164 G1 X-37.781 Y59.752 E.32626 G1 X-38.314 Y59.752 E.0164 G1 X-45.818 Y52.248 E.32626 G1 X-46.352 Y52.248 E.0164 G1 X-38.848 Y59.752 E.32626 G1 X-39.382 Y59.752 E.0164 G1 X-46.885 Y52.248 E.32626 G1 X-47.419 Y52.248 E.0164 G1 X-39.915 Y59.752 E.32626 G1 X-40.449 Y59.752 E.0164 G1 X-47.838 Y52.362 E.32129 G1 X-47.838 Y52.452 E.00274 G1 X-48.282 Y52.452 E.01366 G1 X-44.339 Y56.395 E.17144 G2 X-44.911 Y56.357 I-.469 J2.723 E.01765 G1 X-48.552 Y52.716 E.15829 G1 X-48.552 Y53.249 E.0164 G1 X-45.238 Y56.563 E.14408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.418 Y58.316 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-40.982 Y59.752 E.06243 G1 X-41.516 Y59.752 E.0164 G1 X-42.323 Y58.945 E.03509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.071 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y32.452 E.23808 G1 X-48.552 Y32.974 E.01605 G1 X-43.774 Y37.752 E.20775 G1 X-44.307 Y37.752 E.0164 G1 X-48.552 Y33.507 E.18455 G1 X-48.552 Y34.041 E.0164 G1 X-44.841 Y37.752 E.16135 G1 X-45.375 Y37.752 E.0164 G1 X-48.552 Y34.575 E.13815 G1 X-48.552 Y35.108 E.0164 G1 X-45.908 Y37.752 E.11495 G1 X-46.442 Y37.752 E.0164 G1 X-48.552 Y35.642 E.09175 G1 X-48.552 Y36.175 E.0164 G1 X-46.975 Y37.752 E.06855 G1 X-47.509 Y37.752 E.0164 G1 X-48.552 Y36.709 E.04535 G1 X-48.552 Y37.242 E.0164 G1 X-48.076 Y37.718 E.02068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-48.552 Y37.242 G1 X-48.552 Y36.709 G1 X-47.991 Y37.27 ;WIPE_END G1 X-46.473 Y29.79 Z1 F30000 G1 X-35.574 Y-23.946 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.552 Y-27.923 E.17296 G1 X-39.552 Y-27.39 E.0164 G1 X-36.199 Y-24.037 E.14577 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-37.613 Y-25.451 ;WIPE_END G1 X-31.087 Y-21.495 Z1 F30000 G1 X8.883 Y2.737 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X8.82 Y2.774 E.00204 G1 X8.885 Y2.808 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.238 Y-3.787 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.561898 G1 F14746.408 G2 X24.251 Y-3.696 I-.032 J.051 E.01145 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.124 Y-4.179 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.428798 G1 F15000 G1 X24.125 Y-3.178 E.0445 G1 X24.696 Y-3.485 E.0204 G1 X25.401 Y-3.725 E.02341 G1 X26.144 Y-3.797 E.02348 G1 X26.888 Y-3.75 E.02342 ;WIDTH:0.47407 G1 X27.349 Y-3.635 E.01669 G1 X27.349 Y-4.149 E.01804 ;WIDTH:0.466045 G1 X26.811 Y-4.163 E.01853 ;WIDTH:0.433083 G3 X24.702 Y-4.179 I4.631 J-750.402 E.06706 G1 X23.164 Y-4.179 E.0489 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.214 Y-4.556 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X24.089 Y-2.681 E.08148 G1 X24.315 Y-2.854 E.00875 G1 X24.874 Y-3.152 E.01947 G1 X25.515 Y-3.35 E.0206 G1 X26.182 Y-3.42 E.0206 G1 X26.849 Y-3.358 E.0206 G1 X27.492 Y-3.167 E.0206 G1 X27.756 Y-3.031 E.00913 G1 X27.756 Y-4.556 E.04686 G1 X22.254 Y-4.556 E.16906 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393963 G1 F12000 G3 X28.611 Y-.863 I-8.087 J1.757 E.0117 ;WIDTH:0.344558 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.30722 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.30549 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342226 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385478 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409515 G1 X28.535 Y1.264 E.00864 G1 X27.008 Y3.364 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.524104 G1 F15000 G1 X27.704 Y4.06 E.03858 G1 X27.704 Y3.119 E.03689 G1 X27.23 Y3.315 E.02009 G1 X27.047 Y3.356 E.00736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y32.256 E.57795 G1 X26.948 Y32.553 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.638454 G1 F12850.754 G1 X27.041 Y32.662 E.00693 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.067 Y32.692 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.590382 G1 F13979.169 G1 X27.16 Y32.814 E.00684 ;WIDTH:0.54849 G1 F15000 G1 X27.253 Y32.936 E.00632 ;WIDTH:0.487876 G1 X27.345 Y33.058 E.00556 G1 X27.723 Y33.436 E.01938 G1 X27.723 Y32.681 E.0274 ;WIDTH:0.506598 G1 X27.518 Y32.684 E.00775 ;WIDTH:0.54849 G1 X27.313 Y32.688 E.00846 ;WIDTH:0.569436 G1 F14535.297 G1 X27.107 Y32.691 E.00881 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X26.428 Y52.448 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.422603 G1 F15000 G1 X26.832 Y52.857 E.01781 ;WIDTH:0.442526 G1 X26.968 Y52.959 E.00553 ;WIDTH:0.490737 G1 X27.104 Y53.061 E.0062 ;WIDTH:0.560624 G1 F14782.707 G1 X27.24 Y53.163 E.00717 G1 X27.684 Y53.607 E.02649 G1 X27.684 Y52.719 E.03746 ;WIDTH:0.543002 G1 F15000 G1 X27.457 Y52.699 E.00928 ;WIDTH:0.502898 G1 X27.231 Y52.679 E.00854 ;WIDTH:0.468831 G1 X27.146 Y52.614 E.0037 ;WIDTH:0.430657 G3 X27.027 Y52.448 I.064 J-.171 E.00686 G1 X26.468 Y52.448 E.01765 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.5 Y59.694 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X27.816 Y59.66 E.00882 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.875 Y59.624 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X26.811 Y59.661 E.00204 G1 X26.876 Y59.696 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X26.811 Y59.661 G1 X26.875 Y59.624 ;WIPE_END G1 X27.12 Y51.996 Z1 F30000 G1 X30.682 Y-58.585 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.568079 G1 F14572.847 G1 X30.682 Y-59.482 E.03836 G1 X29.785 Y-59.482 E.03836 G1 X30.654 Y-58.614 E.05254 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F14572.847 G1 X29.785 Y-59.482 G1 X30.557 Y-59.482 ;WIPE_END G1 X23.713 Y-56.105 Z1 F30000 G1 X-42.652 Y-23.367 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:0.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;0.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.2 I-.259 J1.189 P1 F30000 G1 X49.436 Y-1.503 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3480 G1 X49.584 Y-1.552 E.00479 G1 X49.886 Y-1.6 E.0094 G1 X50.21 Y-1.594 E.00996 G1 X50.416 Y-1.553 E.00645 G1 X50.701 Y-1.443 E.00939 G1 X50.979 Y-1.275 E.00998 G1 X51.137 Y-1.137 E.00645 G1 X51.275 Y-.979 E.00645 G1 X51.392 Y-.804 E.00647 G1 X51.485 Y-.615 E.00647 G1 X51.553 Y-.416 E.00646 G1 X51.594 Y-.21 E.00645 G1 X51.607 Y0 E.00647 G1 X51.594 Y.21 E.00647 G1 X51.553 Y.416 E.00645 G1 X51.485 Y.615 E.00646 G1 X51.392 Y.804 E.00647 G1 X51.275 Y.979 E.00647 G1 X51.137 Y1.137 E.00645 G1 X50.979 Y1.275 E.00645 G1 X50.804 Y1.392 E.00647 G1 X50.615 Y1.485 E.00647 G1 X50.416 Y1.553 E.00646 G1 X50.21 Y1.594 E.00645 G1 X50 Y1.607 E.00647 G1 X49.79 Y1.594 E.00647 G1 X49.584 Y1.553 E.00645 G1 X49.299 Y1.443 E.00939 G1 X49.021 Y1.275 E.00998 G1 X48.863 Y1.137 E.00645 G1 X48.725 Y.979 E.00645 G1 X48.608 Y.804 E.00647 G1 X48.515 Y.615 E.00647 G1 X48.447 Y.416 E.00646 G1 X48.406 Y.21 E.00645 G1 X48.393 Y0 E.00647 G1 X48.406 Y-.21 E.00647 G1 X48.447 Y-.416 E.00645 G1 X48.515 Y-.615 E.00646 G1 X48.608 Y-.804 E.00647 G1 X48.725 Y-.979 E.00647 G1 X48.863 Y-1.137 E.00645 G1 X49.021 Y-1.275 E.00645 G1 X49.196 Y-1.392 E.00647 G1 X49.385 Y-1.485 E.00647 G1 X49.399 Y-1.49 E.00046 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3480 G1 X49.584 Y-1.552 G1 X49.886 Y-1.6 G1 X50.21 Y-1.594 G1 X50.416 Y-1.553 G1 X50.701 Y-1.443 G1 X50.979 Y-1.275 G1 X51.137 Y-1.137 G1 X51.219 Y-1.043 ;WIPE_END G1 X50.483 Y-2.541 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 M106 S255 G1 X50.494 Y-2.54 E.00033 G1 X50.991 Y-2.392 E.01595 G1 X51.438 Y-2.153 E.01558 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.443 Y-2.545 E.01369 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.341 Y-2.062 F30000 ;TYPE:Gap infill ;WIDTH:0.582326 G1 F12000 G1 X50.291 Y-2.074 E.00226 G2 X48.057 Y-.786 I-.293 J2.074 E.12212 G2 X47.903 Y0 I2.156 J.83 E.03537 G1 X47.904 Y.018 E.00078 G2 X50.559 Y-2.018 I2.094 J-.018 E.40806 G1 X50.38 Y-2.054 E.00802 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.291 Y-2.074 G1 X50 Y-2.097 G1 X49.591 Y-2.055 G1 X49.197 Y-1.938 G1 X48.836 Y-1.742 G1 X48.538 Y-1.5 ;WIPE_END G1 X40.959 Y-.599 Z1.2 F30000 G1 X28.173 Y.92 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X28.121 Y1.027 E.00364 G3 X25.566 Y-2.091 I-1.928 J-1.026 E.26392 G3 X26.145 Y-2.183 I.656 J2.275 E.01805 G3 X28.284 Y.632 I.048 J2.184 E.12656 G1 X28.187 Y.883 E.00826 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.121 Y1.027 G1 X28.017 Y1.214 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.709 Y2.118 ;WIPE_END G1 X19.254 Y.482 Z1.2 F30000 G1 X7.71 Y-2.052 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.151 J2.165 E.33495 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.594 J1.5 E.06681 G3 X8.454 Y7.024 I-.27 J2.028 E.24847 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.558 Y4.265 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.559 Y4.259 E.00017 G3 X9.084 Y3.912 I1.133 J1.142 E.01945 G3 X9.644 Y3.793 I.637 J1.621 E.01767 G3 X8.42 Y4.417 I.049 J1.608 E.26702 G1 X8.531 Y4.294 E.00511 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.559 Y4.259 G1 X8.848 Y4.037 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.644 Y3.793 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.316 Y3.912 G1 X10.371 Y3.939 ;WIPE_END G1 X3.163 Y6.449 Z1.2 F30000 G1 X-16.248 Y13.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.151 J-2.165 E.33495 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.27 J-2.028 E.24846 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.461 Y8.974 Z1.2 F30000 G1 X-29.158 Y6.535 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.167 Y6.533 E.00026 G3 X-30.916 Y3.912 I-1.141 J-1.133 E.17503 G3 X-30.356 Y3.793 I.637 J1.621 E.01767 G3 X-29.029 Y6.375 I.049 J1.607 E.11129 G1 X-29.133 Y6.504 E.00509 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.167 Y6.533 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.97 Y6.861 ;WIPE_END G1 X-33.027 Y-.489 Z1.2 F30000 G1 X-38.981 Y-21.771 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.939 Y-21.995 E.00758 G3 X-38.23 Y-23.218 I2.632 J.71 E.04744 G3 X-36.445 Y-24.008 I1.913 J1.91 E.06623 G3 X-39.01 Y-21.645 I.138 J2.723 E.44273 G1 X-38.99 Y-21.732 E.00295 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.582 Y-21.691 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.546 Y-21.89 E.0067 G3 X-37.713 Y-23.13 I2.239 J.604 E.05045 G3 X-36.419 Y-23.602 I1.424 J1.896 E.04637 G3 X-38.606 Y-21.592 I.111 J2.316 E.37635 G1 X-38.591 Y-21.652 E.00207 G1 X-38.155 Y-21.606 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.125 Y-21.777 E.00533 G3 X-37.243 Y-22.921 I1.817 J.49 E.04556 G3 X-36.39 Y-23.168 I.923 J1.592 E.02754 G3 X-38.174 Y-21.535 I.082 J1.88 E.28269 G1 X-38.165 Y-21.568 E.00104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.125 Y-21.777 G1 X-38.042 Y-22.01 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-36.965 Y-23.049 ;WIPE_END G1 X-35.405 Y-30.521 Z1.2 F30000 G1 X-33.802 Y-38.196 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.943 Y-37.927 E.01007 G3 X-38.23 Y-41.218 I-2.364 J-1.358 E.30824 G3 X-36.445 Y-42.008 I1.912 J1.91 E.06623 G3 X-33.786 Y-38.247 I.138 J2.723 E.18197 G1 X-33.79 Y-38.234 E.00043 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.167 Y-38.376 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.298 Y-38.132 E.00919 G3 X-37.713 Y-41.13 I-2.01 J-1.154 E.27213 G3 X-36.419 Y-41.602 I1.424 J1.896 E.04637 G3 X-34.16 Y-38.415 I.111 J2.315 E.15408 G1 X-34.566 Y-38.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-37.243 Y-40.921 I-1.742 J-.716 E.22007 G3 X-36.39 Y-41.168 I.923 J1.592 E.02754 G3 X-34.551 Y-38.607 I.083 J1.882 E.11479 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.667 Y-38.345 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.042 Y-37.421 ;WIPE_END G1 X-28.573 Y-38.992 Z1.2 F30000 G1 X-20.277 Y-40.737 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.246 Y-40.782 E.0018 G3 X-18.411 Y-41.735 I1.941 J1.493 E.07082 G3 X-18.826 Y-36.896 I.111 J2.447 E.27651 G3 X-20.425 Y-40.515 I.52 J-2.393 E.15282 G1 X-20.299 Y-40.704 E.00752 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.511 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.92 Y-40.531 E.00092 G3 X-18.385 Y-41.329 I1.621 J1.243 E.05926 G3 X-18.746 Y-37.295 I.084 J2.041 E.23056 G3 X-20.068 Y-40.309 I.447 J-1.993 E.12696 G1 X-19.96 Y-40.477 E.00663 M73 P17 R66 G1 X-19.58 Y-40.271 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-18.916 Y-40.776 I1.273 J.983 E.02594 G3 X-18.356 Y-40.895 I.637 J1.621 E.01767 G3 X-19.604 Y-40.239 I.049 J1.608 E.26569 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.152 Y-40.651 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.356 Y-40.895 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.82 Y-40.822 ;WIPE_END G1 X-17.058 Y-33.228 Z1.2 F30000 G1 X-15.917 Y-21.862 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.877 Y-21.607 E.00856 G3 X-19.794 Y-23.235 I-2.431 J.322 E.34098 G3 X-18.411 Y-23.735 I1.507 J2.006 E.0495 G3 X-15.939 Y-21.921 I.104 J2.45 E.10989 G1 X-15.931 Y-21.899 E.00075 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.316 Y-21.783 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.282 Y-21.554 E.00768 G3 X-19.323 Y-23.06 I-2.026 J.267 E.29306 G3 X-18.385 Y-23.329 I1.003 J1.732 E.03271 G3 X-16.335 Y-21.818 I.077 J2.042 E.0912 G1 X-16.743 Y-21.698 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.712 Y-21.497 E.00624 G3 X-18.916 Y-22.776 I-1.595 J.211 E.22028 G3 X-18.356 Y-22.895 I.637 J1.621 E.01767 G3 X-16.761 Y-21.73 I.049 J1.608 E.06535 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.712 Y-21.497 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.32 Y-20.01 G1 X-17.384 Y-19.968 ;WIPE_END G1 X-20.773 Y-13.129 Z1.2 F30000 G1 X-42.748 Y31.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z1.2 F30000 G1 X-42.748 Y51.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z1.2 F30000 G1 X4.752 Y47.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z1.2 F30000 G1 X4.752 Y33.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z1.2 F30000 G1 X27.252 Y31.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z1.2 F30000 G1 X-28.09 Y-52.948 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.944 E.31993 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.945 E.32011 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z1.2 F30000 G1 X7.055 Y-53.79 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z1.2 F30000 G1 X-40.155 Y-5.355 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.444 J1.451 E.19524 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.444 J1.451 E.19522 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.304 Y-2.782 Z1.2 F30000 G1 X-48.764 Y-.942 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.732 Y-1.032 E.00296 G3 X-47.434 Y-2.091 I1.924 J1.034 E.0528 G3 X-46.855 Y-2.183 I.656 J2.275 E.01805 G3 X-48.897 Y-.636 I.048 J2.184 E.3376 G1 X-48.78 Y-.905 E.00901 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.732 Y-1.032 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.289 Y-2.128 ;WIPE_END G1 X-47.154 Y5.504 Z1.2 F30000 G1 X-46.193 Y59.808 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.199 Y59.808 E.0002 G3 X-45.416 Y57.512 I1.392 J-.807 E.08442 G3 X-44.856 Y57.393 I.637 J1.621 E.01767 G3 X-46.081 Y59.983 I.049 J1.608 E.20194 G1 X-46.171 Y59.842 E.00514 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.199 Y59.808 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.039 Y57.975 ;WIPE_END G1 X-38.409 Y58.178 Z1.2 F30000 G1 X22.807 Y59.808 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.801 Y59.807 E.00019 G3 X23.584 Y57.512 I1.391 J-.807 E.08441 G3 X24.144 Y57.393 I.637 J1.621 E.01767 G3 X22.919 Y59.983 I.049 J1.607 E.20186 G1 X22.829 Y59.842 E.00514 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.801 Y59.807 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.891 Y58.067 G1 X22.965 Y57.977 ;WIPE_END G1 X17.577 Y52.571 Z1.2 F30000 G1 X-40.59 Y-5.79 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-43.895 Y-3.798 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.426948 G1 F15000 G1 X-45.092 Y-3.798 E.03745 G3 X-44.334 Y-3.359 I-1.093 J2.758 E.0275 G1 X-43.923 Y-3.77 E.01819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.976 Y-4.179 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42386 G1 F15000 G2 X-47.117 Y-4.174 I-1.362 J601.969 E.12853 ;WIDTH:0.442937 G1 X-47.422 Y-4.161 E.00997 ;WIDTH:0.470762 G3 X-47.948 Y-4.148 I-.415 J-6.076 E.01832 G1 X-47.948 Y-3.65 E.01734 G1 X-47.229 Y-3.78 E.02546 ;WIDTH:0.424017 G1 X-46.483 Y-3.787 E.02316 G1 X-45.751 Y-3.648 E.02313 G1 X-45.06 Y-3.373 E.02311 G1 X-44.435 Y-2.969 E.0231 G1 X-44.303 Y-2.852 E.00548 G1 X-43.005 Y-4.15 E.05703 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.066 Y-4.556 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-48.356 Y-4.556 E.19327 G1 X-48.356 Y-3.041 E.04654 G1 X-47.81 Y-3.267 E.01814 G1 X-47.154 Y-3.401 E.0206 G1 X-46.483 Y-3.405 E.0206 G1 X-45.825 Y-3.278 E.0206 G1 X-45.204 Y-3.025 E.0206 G1 X-44.645 Y-2.655 E.0206 G1 X-44.303 Y-2.319 E.01474 G1 X-42.094 Y-4.528 E.09598 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.135 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409518 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.38548 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342224 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305489 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275113 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276405 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307219 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344558 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.393962 G2 X-49.135 Y1.264 I8.197 J-1.362 E.0117 G1 X-48.392 Y2.903 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-48.456 Y2.94 E.00204 G1 X-48.391 Y2.975 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-48.409 Y52.537 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-48.472 Y52.574 E.00204 G1 X-48.407 Y52.608 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.592 Y52.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-47.655 Y52.337 E.00204 G1 X-47.59 Y52.371 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.534 Y59.534 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.388844 G1 F15000 G1 X-47.599 Y59.571 E.00211 G1 X-47.532 Y59.606 E.00211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.476 Y59.676 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-48.199 Y59.689 E.00766 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-48.476 Y59.676 ;WIPE_END G1 X-46.09 Y52.425 Z1.2 F30000 G1 X-29.525 Y2.073 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.381373 G1 F15000 G1 X-30.044 Y2.593 E.02025 G1 X-29.525 Y2.701 E.01463 G1 X-29.525 Y2.113 E.0162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.919 Y-18.235 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-37.476 Y-18.397 E.01784 G1 X-37.982 Y-18.665 E.01758 G1 X-38.498 Y-19.072 E.02021 G3 X-39.035 Y-19.815 I1.822 J-1.881 E.02831 G1 X-39.356 Y-19.762 E.00999 G1 X-39.356 Y-15.798 E.1218 G1 X-36.947 Y-18.207 E.10467 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.632 Y-18.055 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G3 X-38.459 Y-18.536 I1.303 J-3.19 E.02946 G1 X-38.979 Y-19.045 E.02238 G1 X-38.979 Y-16.709 E.0718 G1 X-37.661 Y-18.027 E.05727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.221 Y-17.958 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.360478 G1 F15000 G1 X-38.631 Y-18.231 E.01277 G1 X-38.631 Y-17.547 E.01771 G1 X-38.249 Y-17.93 E.014 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-20.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465138 G1 F12000 G1 X-39.333 Y-20.461 E.0101 ;WIDTH:0.441846 G3 X-39.356 Y-20.68 I3.324 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-20.872 E.00563 ;WIDTH:0.366946 G3 X-39.376 Y-21.682 I8.954 J-.421 E.02139 ;WIDTH:0.399137 G3 X-39.356 Y-21.896 I3.283 J.204 E.00624 ;WIDTH:0.439025 G1 X-39.337 Y-22.088 E.00622 ;WIDTH:0.475337 G3 X-39.285 Y-22.405 I4.888 J.63 E.01132 G1 X-38.129 Y-23.62 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-37.998 Y-23.736 E.00485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.973 Y-22.71 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.037 Y-22.673 E.00204 G1 X-38.972 Y-22.638 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.467 Y-36.05 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.616808 G1 F13335.461 G2 X-38.452 Y-35.953 I-.036 J.056 E.0142 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.979 Y-34.84 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-37.723 Y-36.096 E.05457 G1 X-38.239 Y-36.383 E.01815 G1 X-38.747 Y-36.789 E.01997 G1 X-38.979 Y-37.045 E.01063 G1 X-38.979 Y-34.88 E.06654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.356 Y-33.93 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-37.028 Y-36.257 E.10115 G1 X-37.506 Y-36.409 E.0154 G1 X-38.03 Y-36.697 E.01836 G1 X-38.498 Y-37.072 E.01846 G3 X-39.035 Y-37.815 I1.822 J-1.881 E.02831 G1 X-39.356 Y-37.762 E.00999 G1 X-39.356 Y-33.97 E.11654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-38.171 F30000 ;TYPE:Gap infill ;WIDTH:0.46514 G1 F12000 G1 X-39.333 Y-38.461 E.0101 ;WIDTH:0.441848 G3 X-39.356 Y-38.68 I3.324 J-.452 E.00717 ;WIDTH:0.401238 G1 X-39.375 Y-38.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-39.682 I8.953 J-.421 E.02139 ;WIDTH:0.399137 G3 X-39.356 Y-39.896 I3.283 J.204 E.00624 ;WIDTH:0.439026 G1 X-39.337 Y-40.088 E.00622 ;WIDTH:0.475338 G3 X-39.285 Y-40.405 I4.891 J.631 E.01132 G1 X-39.016 Y-40.72 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G3 X-38.358 Y-41.474 I3.713 J2.578 E.02776 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 X-26.895 Y-59.653 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-26.959 Y-59.616 E.00204 G1 X-26.894 Y-59.581 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.404 Y-59.662 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-51.467 Y-59.625 E.00204 G1 X-51.402 Y-59.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.851 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X14.549 Y-60 E.19 G1 X29.923 Y-52.487 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.505729 G1 F15000 G1 X30.713 Y-52.487 E.0298 G1 X30.713 Y-53.277 E.0298 G1 X29.951 Y-52.515 E.04063 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.713 Y-53.277 G1 X30.713 Y-52.487 G1 X30.58 Y-52.487 ;WIPE_END G1 X29.966 Y-44.879 Z1.2 F30000 G1 X26.617 Y-3.381 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.885 Y-3.35 E.00829 G1 X27.492 Y-3.167 E.01947 G1 X27.756 Y-3.031 E.00913 G1 X27.756 Y-4.519 E.04574 G1 X26.645 Y-3.409 E.04826 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.399 Y-3.642 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427538 G1 F15000 G1 X27.327 Y-3.6 E.00261 G1 X27.403 Y-3.565 E.00262 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393966 G1 F12000 G3 X28.611 Y-.863 I-8.099 J1.76 E.0117 ;WIDTH:0.344559 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.30722 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.38548 G1 X28.591 Y.981 E.00334 ;WIDTH:0.40952 G1 X28.535 Y1.264 E.00864 G1 X26.463 Y17.562 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.40658 G1 F15000 G1 X27.048 Y17.562 E.01734 G1 X27.105 Y17.415 E.00466 ;WIDTH:0.413134 G1 X27.168 Y17.374 E.00226 ;WIDTH:0.443586 G1 X27.231 Y17.333 E.00245 ;WIDTH:0.480624 G1 X27.462 Y17.311 E.00828 ;WIDTH:0.543078 G1 X27.693 Y17.289 E.00946 G1 X27.693 Y16.43 E.03501 G1 X27.263 Y16.86 E.02475 ;WIDTH:0.521367 G1 X27.127 Y16.961 E.00663 ;WIDTH:0.471983 G1 X26.991 Y17.063 E.00595 ;WIDTH:0.410119 G1 X26.854 Y17.164 E.00509 G1 X26.491 Y17.534 E.01549 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y32.256 E.57795 G1 X26.962 Y37.465 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.601642 G1 F13697.44 G1 X27.021 Y37.388 E.00445 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.368 Y36.965 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.493 G1 F15000 G1 X27.207 Y37.16 E.0093 ;WIDTH:0.54057 G1 X27.046 Y37.356 E.01028 G1 X27.231 Y37.306 E.00777 ;WIDTH:0.481473 G1 X27.732 Y37.328 E.01792 G1 X27.732 Y36.601 E.02597 G1 X27.396 Y36.936 E.01694 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X28.122 Y54.361 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.420206 G1 F15000 G1 X25.677 Y56.806 E.10629 G2 X25.337 Y56.612 I-.907 J1.193 E.01206 G1 X27.952 Y53.997 E.11367 G1 X27.952 Y53.464 E.0164 G1 X24.953 Y56.462 E.13038 G2 X24.512 Y56.37 I-1.001 J3.669 E.01386 G1 X27.952 Y52.93 E.14955 G1 X27.952 Y52.452 E.01471 G1 X27.897 Y52.452 E.0017 G1 X23.791 Y56.557 E.17851 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.757 Y58.591 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X20.596 Y59.752 E.05048 G1 X20.063 Y59.752 E.0164 G1 X21.711 Y58.104 E.07165 G3 X23.304 Y56.511 I2.447 J.854 E.07166 G1 X27.363 Y52.452 E.17649 G1 X27.238 Y52.452 E.00384 G1 X27.238 Y52.248 E.00626 G1 X27.033 Y52.248 E.0063 G1 X19.529 Y59.752 E.32625 G1 X18.996 Y59.752 E.0164 G1 X26.5 Y52.248 E.32625 G1 X25.966 Y52.248 E.0164 G1 X18.462 Y59.752 E.32625 G1 X17.929 Y59.752 E.0164 G1 X25.432 Y52.248 E.32625 G1 X24.899 Y52.248 E.0164 G1 X17.395 Y59.752 E.32625 G1 X16.862 Y59.752 E.0164 G1 X24.365 Y52.248 E.32625 G1 X23.832 Y52.248 E.0164 G1 X16.328 Y59.752 E.32625 G1 X15.794 Y59.752 E.0164 G1 X23.298 Y52.248 E.32625 G1 X22.765 Y52.248 E.0164 G1 X15.261 Y59.752 E.32625 G1 X14.727 Y59.752 E.0164 G1 X22.231 Y52.248 E.32625 G1 X21.952 Y52.248 E.00858 G1 X21.952 Y51.994 E.00782 G1 X14.194 Y59.752 E.33731 G1 X13.66 Y59.752 E.0164 G1 X21.952 Y51.46 E.36051 G1 X21.952 Y50.927 E.0164 G1 X13.127 Y59.752 E.38371 G1 X12.593 Y59.752 E.0164 G1 X21.952 Y50.393 E.40691 G1 X21.952 Y49.859 E.0164 G1 X12.059 Y59.752 E.43011 G1 X11.526 Y59.752 E.0164 G1 X21.952 Y49.326 E.45331 G1 X21.952 Y48.792 E.0164 G1 X10.992 Y59.752 E.47651 G1 X10.459 Y59.752 E.0164 G1 X21.952 Y48.259 E.4997 G1 X21.952 Y47.725 E.0164 G1 X9.925 Y59.752 E.5229 G1 X9.392 Y59.752 E.0164 G1 X21.952 Y47.192 E.5461 G1 X21.952 Y46.658 E.0164 G1 X8.858 Y59.752 E.5693 G1 X8.325 Y59.752 E.0164 G1 X21.952 Y46.125 E.5925 G1 X21.952 Y45.591 E.0164 G1 X7.791 Y59.752 E.6157 G1 X7.257 Y59.752 E.0164 G1 X21.952 Y45.057 E.6389 G1 X21.952 Y44.524 E.0164 G1 X6.724 Y59.752 E.66209 G1 X6.19 Y59.752 E.0164 G1 X21.952 Y43.99 E.68529 G1 X21.952 Y43.457 E.0164 G1 X5.657 Y59.752 E.70849 G1 X5.123 Y59.752 E.0164 G1 X21.952 Y42.923 E.73169 G1 X21.952 Y42.39 E.0164 G1 X4.59 Y59.752 E.75489 G1 X4.056 Y59.752 E.0164 G1 X21.952 Y41.856 E.77809 G1 X21.952 Y41.322 E.0164 G1 X3.522 Y59.752 E.80129 G1 X2.989 Y59.752 E.0164 G1 X21.952 Y40.789 E.82448 G1 X21.952 Y40.255 E.0164 G1 X2.455 Y59.752 E.84768 G1 X1.922 Y59.752 E.0164 G1 X21.952 Y39.722 E.87088 G1 X21.952 Y39.188 E.0164 G1 X1.388 Y59.752 E.89408 G1 X.855 Y59.752 E.0164 G1 X22.122 Y38.485 E.92466 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.886 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y35.856 E.08981 G1 X27.952 Y35.322 E.0164 G1 X25.522 Y37.752 E.10563 G1 X24.989 Y37.752 E.0164 G1 X27.952 Y34.789 E.12883 G1 X27.952 Y34.255 E.0164 G1 X24.455 Y37.752 E.15203 G1 X23.922 Y37.752 E.0164 G1 X27.952 Y33.722 E.17522 G1 X27.952 Y33.188 E.0164 G1 X23.388 Y37.752 E.19842 G1 X22.855 Y37.752 E.0164 G1 X27.952 Y32.655 E.22162 G1 X27.952 Y32.452 E.00624 G1 X27.621 Y32.452 E.01016 M73 P18 R66 G1 X22.321 Y37.752 E.23045 G1 X21.952 Y37.752 E.01135 G1 X21.952 Y38.121 E.01135 G1 X.321 Y59.752 E.94048 G1 X-.212 Y59.752 E.0164 G1 X27.238 Y32.301 E1.19351 G1 X27.238 Y32.248 E.00164 G1 X26.758 Y32.248 E.01477 G1 X-.746 Y59.752 E1.19583 G1 X-1.28 Y59.752 E.0164 G1 X26.224 Y32.248 E1.19583 G1 X25.691 Y32.248 E.0164 G1 X-1.813 Y59.752 E1.19583 G1 X-2.347 Y59.752 E.0164 G1 X25.157 Y32.248 E1.19583 G1 X24.624 Y32.248 E.0164 G1 X-2.88 Y59.752 E1.19583 G1 X-3.414 Y59.752 E.0164 G1 X24.09 Y32.248 E1.19583 G1 X23.556 Y32.248 E.0164 G1 X-3.947 Y59.752 E1.19583 G1 X-4.481 Y59.752 E.0164 G1 X23.023 Y32.248 E1.19583 G1 X22.489 Y32.248 E.0164 G1 X-5.015 Y59.752 E1.19583 G1 X-5.548 Y59.752 E.0164 G1 X21.956 Y32.248 E1.19583 G1 X21.952 Y31.718 E.01629 G1 X-6.082 Y59.752 E1.21886 G1 X-6.615 Y59.752 E.0164 G1 X21.952 Y31.185 E1.24206 G1 X21.952 Y30.651 E.0164 G1 X4.948 Y47.655 E.7393 G1 X4.948 Y47.121 E.0164 G1 X21.952 Y30.118 E.7393 G1 X21.952 Y29.584 E.0164 G1 X4.948 Y46.588 E.7393 G1 X4.948 Y46.054 E.0164 G1 X21.952 Y29.051 E.7393 G1 X21.952 Y28.517 E.0164 G1 X4.948 Y45.521 E.7393 G1 X4.948 Y44.987 E.0164 G1 X21.952 Y27.983 E.7393 G1 X21.952 Y27.45 E.0164 G1 X4.948 Y44.454 E.7393 G1 X4.948 Y43.92 E.0164 G1 X21.952 Y26.916 E.7393 G1 X21.952 Y26.383 E.0164 G1 X4.948 Y43.386 E.7393 G1 X4.948 Y42.853 E.0164 G1 X21.952 Y25.849 E.7393 G1 X21.952 Y25.316 E.0164 G1 X4.948 Y42.319 E.7393 G1 X4.948 Y41.786 E.0164 G1 X21.952 Y24.782 E.7393 G1 X21.952 Y24.248 E.0164 G1 X4.948 Y41.252 E.7393 G1 X4.948 Y40.719 E.0164 G1 X21.952 Y23.715 E.7393 G1 X21.952 Y23.181 E.0164 G1 X4.948 Y40.185 E.7393 G1 X4.948 Y39.652 E.0164 G1 X21.952 Y22.648 E.7393 G1 X21.952 Y22.114 E.0164 G1 X4.948 Y39.118 E.7393 G1 X4.948 Y38.584 E.0164 G1 X21.952 Y21.581 E.7393 G1 X21.952 Y21.047 E.0164 G1 X4.948 Y38.051 E.7393 G1 X4.948 Y37.752 E.00919 G1 X4.714 Y37.752 E.00721 G1 X21.952 Y20.514 E.7495 G1 X21.952 Y19.98 E.0164 G1 X4.18 Y37.752 E.7727 G1 X3.646 Y37.752 E.0164 G1 X21.952 Y19.446 E.7959 G1 X21.952 Y18.913 E.0164 G1 X3.113 Y37.752 E.8191 G1 X2.579 Y37.752 E.0164 G1 X22.122 Y18.21 E.84967 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.611 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y15.581 E.10178 G1 X27.952 Y15.047 E.0164 G1 X25.247 Y17.752 E.1176 G1 X24.714 Y17.752 E.0164 G1 X27.952 Y14.514 E.1408 G1 X27.952 Y13.98 E.0164 G1 X24.18 Y17.752 E.164 G1 X23.646 Y17.752 E.0164 G1 X27.952 Y13.446 E.1872 G1 X27.952 Y12.913 E.0164 G1 X23.113 Y17.752 E.2104 G1 X22.579 Y17.752 E.0164 G1 X27.952 Y12.379 E.23359 G1 X27.952 Y11.846 E.0164 G1 X2.046 Y37.752 E1.12637 G1 X1.512 Y37.752 E.0164 G1 X27.952 Y11.312 E1.14956 G1 X27.952 Y10.779 E.0164 G1 X4.948 Y33.782 E1.00017 G1 X4.948 Y34.248 E.01432 G1 X4.482 Y34.248 E.01432 G1 X.979 Y37.752 E.15234 G1 X.445 Y37.752 E.0164 G1 X3.949 Y34.248 E.15234 G1 X3.415 Y34.248 E.0164 G1 X-.089 Y37.752 E.15234 G1 X-.622 Y37.752 E.0164 G1 X2.882 Y34.248 E.15234 G1 X2.348 Y34.248 E.0164 G1 X-1.156 Y37.752 E.15234 G1 X-1.689 Y37.752 E.0164 G1 X1.815 Y34.248 E.15234 G1 X1.281 Y34.248 E.0164 G1 X-2.223 Y37.752 E.15234 G1 X-2.756 Y37.752 E.0164 G1 X.747 Y34.248 E.15234 G1 X.214 Y34.248 E.0164 G1 X-3.29 Y37.752 E.15234 G1 X-3.823 Y37.752 E.0164 G1 X-.32 Y34.248 E.15234 G1 X-.853 Y34.248 E.0164 G1 X-4.357 Y37.752 E.15234 G1 X-4.891 Y37.752 E.0164 G1 X-1.387 Y34.248 E.15234 G1 X-1.92 Y34.248 E.0164 G1 X-5.424 Y37.752 E.15234 G1 X-5.958 Y37.752 E.0164 G1 X-2.454 Y34.248 E.15234 G1 X-2.988 Y34.248 E.0164 G1 X-6.491 Y37.752 E.15234 G1 X-7.025 Y37.752 E.0164 G1 X-3.521 Y34.248 E.15234 G1 X-4.055 Y34.248 E.0164 G1 X-7.558 Y37.752 E.15234 G1 X-8.092 Y37.752 E.0164 G1 X-4.588 Y34.248 E.15234 G1 X-5.122 Y34.248 E.0164 G1 X-8.626 Y37.752 E.15234 G1 X-9.159 Y37.752 E.0164 G1 X-5.655 Y34.248 E.15234 G1 X-6.189 Y34.248 E.0164 G1 X-9.693 Y37.752 E.15234 G1 X-10.226 Y37.752 E.0164 G1 X-6.722 Y34.248 E.15234 G1 X-7.256 Y34.248 E.0164 G1 X-10.76 Y37.752 E.15234 G1 X-11.293 Y37.752 E.0164 G1 X-7.79 Y34.248 E.15234 G1 X-8.323 Y34.248 E.0164 G1 X-11.827 Y37.752 E.15234 G1 X-12.361 Y37.752 E.0164 G1 X-8.857 Y34.248 E.15234 G1 X-9.39 Y34.248 E.0164 G1 X-12.894 Y37.752 E.15234 G1 X-13.428 Y37.752 E.0164 G1 X-9.924 Y34.248 E.15234 G1 X-10.457 Y34.248 E.0164 G1 X-13.961 Y37.752 E.15234 G1 X-14.495 Y37.752 E.0164 G1 X-10.991 Y34.248 E.15234 G1 X-11.525 Y34.248 E.0164 G1 X-15.028 Y37.752 E.15234 G1 X-15.562 Y37.752 E.0164 G1 X-12.058 Y34.248 E.15234 G1 X-12.592 Y34.248 E.0164 G1 X-16.095 Y37.752 E.15234 G1 X-16.629 Y37.752 E.0164 G1 X-13.125 Y34.248 E.15234 G1 X-13.659 Y34.248 E.0164 G1 X-17.163 Y37.752 E.15234 G1 X-17.696 Y37.752 E.0164 G1 X-14.192 Y34.248 E.15234 G1 X-14.726 Y34.248 E.0164 G1 X-18.23 Y37.752 E.15234 G1 X-18.763 Y37.752 E.0164 G1 X-15.259 Y34.248 E.15234 G1 X-15.793 Y34.248 E.0164 G1 X-19.297 Y37.752 E.15234 G1 X-19.83 Y37.752 E.0164 G1 X-16.327 Y34.248 E.15234 G1 X-16.86 Y34.248 E.0164 G1 X-20.364 Y37.752 E.15234 G1 X-20.898 Y37.752 E.0164 G1 X-17.394 Y34.248 E.15234 G1 X-17.927 Y34.248 E.0164 G1 X-21.431 Y37.752 E.15234 G1 X-21.965 Y37.752 E.0164 G1 X-18.461 Y34.248 E.15234 G1 X-18.994 Y34.248 E.0164 G1 X-22.498 Y37.752 E.15234 G1 X-23.032 Y37.752 E.0164 G1 X-19.528 Y34.248 E.15234 G1 X-20.062 Y34.248 E.0164 G1 X-23.565 Y37.752 E.15234 G1 X-24.099 Y37.752 E.0164 G1 X-20.595 Y34.248 E.15234 G1 X-21.129 Y34.248 E.0164 G1 X-24.802 Y37.922 E.15972 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-23.388 Y36.507 ;WIPE_END G1 X-16.337 Y39.43 Z1.2 F30000 G1 X4.525 Y48.078 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-7.149 Y59.752 E.50755 G1 X-7.682 Y59.752 E.0164 G1 X3.821 Y48.248 E.50017 G1 X3.288 Y48.248 E.0164 G1 X-8.216 Y59.752 E.50017 G1 X-8.749 Y59.752 E.0164 G1 X2.754 Y48.248 E.50017 G1 X2.221 Y48.248 E.0164 G1 X-9.283 Y59.752 E.50017 G1 X-9.817 Y59.752 E.0164 G1 X1.687 Y48.248 E.50017 G1 X1.154 Y48.248 E.0164 G1 X-10.35 Y59.752 E.50017 G1 X-10.884 Y59.752 E.0164 G1 X.62 Y48.248 E.50017 G1 X.086 Y48.248 E.0164 G1 X-11.417 Y59.752 E.50017 G1 X-11.951 Y59.752 E.0164 G1 X-.447 Y48.248 E.50017 G1 X-.981 Y48.248 E.0164 G1 X-12.484 Y59.752 E.50017 G1 X-13.018 Y59.752 E.0164 G1 X-1.514 Y48.248 E.50017 G1 X-2.048 Y48.248 E.0164 G1 X-13.552 Y59.752 E.50017 G1 X-14.085 Y59.752 E.0164 G1 X-2.581 Y48.248 E.50017 G1 X-3.115 Y48.248 E.0164 G1 X-14.619 Y59.752 E.50017 G1 X-15.152 Y59.752 E.0164 G1 X-3.648 Y48.248 E.50017 G1 X-4.182 Y48.248 E.0164 G1 X-15.686 Y59.752 E.50017 G1 X-16.219 Y59.752 E.0164 G1 X-4.716 Y48.248 E.50017 G1 X-5.249 Y48.248 E.0164 G1 X-16.753 Y59.752 E.50017 G1 X-17.286 Y59.752 E.0164 G1 X-5.783 Y48.248 E.50017 G1 X-6.316 Y48.248 E.0164 G1 X-17.82 Y59.752 E.50017 G1 X-18.354 Y59.752 E.0164 G1 X-6.85 Y48.248 E.50017 G1 X-7.383 Y48.248 E.0164 G1 X-18.887 Y59.752 E.50017 G1 X-19.421 Y59.752 E.0164 G1 X-7.917 Y48.248 E.50017 G1 X-8.451 Y48.248 E.0164 G1 X-19.954 Y59.752 E.50017 G1 X-20.488 Y59.752 E.0164 G1 X-8.984 Y48.248 E.50017 G1 X-9.518 Y48.248 E.0164 G1 X-21.021 Y59.752 E.50017 G1 X-21.555 Y59.752 E.0164 G1 X-10.051 Y48.248 E.50017 G1 X-10.585 Y48.248 E.0164 G1 X-22.089 Y59.752 E.50017 G1 X-22.622 Y59.752 E.0164 G1 X-11.118 Y48.248 E.50017 G1 X-11.652 Y48.248 E.0164 G1 X-23.156 Y59.752 E.50017 G1 X-23.689 Y59.752 E.0164 G1 X-12.185 Y48.248 E.50017 G1 X-12.719 Y48.248 E.0164 G1 X-24.223 Y59.752 E.50017 G1 X-24.756 Y59.752 E.0164 G1 X-13.253 Y48.248 E.50017 G1 X-13.786 Y48.248 E.0164 G1 X-25.29 Y59.752 E.50017 G1 X-25.824 Y59.752 E.0164 G1 X-14.32 Y48.248 E.50017 G1 X-14.853 Y48.248 E.0164 G1 X-26.357 Y59.752 E.50017 G1 X-26.891 Y59.752 E.0164 G1 X-15.387 Y48.248 E.50017 G1 X-15.92 Y48.248 E.0164 G1 X-27.424 Y59.752 E.50017 G1 X-27.958 Y59.752 E.0164 G1 X-16.454 Y48.248 E.50017 G1 X-16.988 Y48.248 E.0164 G1 X-28.491 Y59.752 E.50017 G1 X-29.025 Y59.752 E.0164 G1 X-17.521 Y48.248 E.50017 G1 X-18.055 Y48.248 E.0164 G1 X-29.558 Y59.752 E.50017 G1 X-30.092 Y59.752 E.0164 G1 X-18.588 Y48.248 E.50017 G1 X-19.122 Y48.248 E.0164 G1 X-30.626 Y59.752 E.50017 G1 X-31.159 Y59.752 E.0164 G1 X-19.655 Y48.248 E.50017 G1 X-20.189 Y48.248 E.0164 G1 X-31.693 Y59.752 E.50017 G1 X-32.226 Y59.752 E.0164 G1 X-20.722 Y48.248 E.50017 G1 X-21.256 Y48.248 E.0164 G1 X-32.76 Y59.752 E.50017 G1 X-33.293 Y59.752 E.0164 G1 X-21.79 Y48.248 E.50017 G1 X-22.323 Y48.248 E.0164 G1 X-33.827 Y59.752 E.50017 G1 X-34.361 Y59.752 E.0164 G1 X-22.857 Y48.248 E.50017 G1 X-23.39 Y48.248 E.0164 G1 X-34.894 Y59.752 E.50017 G1 X-35.428 Y59.752 E.0164 G1 X-23.924 Y48.248 E.50017 G1 X-24.457 Y48.248 E.0164 G1 X-35.961 Y59.752 E.50017 G1 X-36.495 Y59.752 E.0164 G1 X-24.991 Y48.248 E.50017 G1 X-25.525 Y48.248 E.0164 G1 X-37.028 Y59.752 E.50017 G1 X-37.562 Y59.752 E.0164 G1 X-25.548 Y47.738 E.52234 G1 X-25.548 Y47.205 E.0164 G1 X-38.095 Y59.752 E.54554 G1 X-38.629 Y59.752 E.0164 G1 X-25.548 Y46.671 E.56874 G1 X-25.548 Y46.137 E.0164 G1 X-39.163 Y59.752 E.59194 G1 X-39.696 Y59.752 E.0164 G1 X-25.548 Y45.604 E.61514 G1 X-25.548 Y45.07 E.0164 G1 X-40.23 Y59.752 E.63834 G1 X-40.763 Y59.752 E.0164 G1 X-25.548 Y44.537 E.66153 G1 X-25.548 Y44.003 E.0164 G1 X-41.297 Y59.752 E.68473 G1 X-41.83 Y59.752 E.0164 G1 X-25.548 Y43.47 E.70793 G1 X-25.548 Y42.936 E.0164 G1 X-42.225 Y59.613 E.72509 G2 X-42.149 Y59.004 I-2.275 J-.591 E.01892 G1 X-25.548 Y42.402 E.7218 G1 X-25.548 Y41.869 E.0164 G1 X-42.199 Y58.519 E.72394 G2 X-42.312 Y58.1 I-1.652 J.222 E.01341 G1 X-25.548 Y41.335 E.72888 G1 X-25.548 Y40.802 E.0164 G1 X-42.477 Y57.73 E.73604 G2 X-42.685 Y57.405 I-1.341 J.627 E.01191 G1 X-25.548 Y40.268 E.74507 G1 X-25.548 Y39.735 E.0164 G1 X-42.933 Y57.119 E.75586 G2 X-43.221 Y56.874 I-1.076 J.972 E.01167 G1 X-25.548 Y39.201 E.76839 G1 X-25.548 Y38.668 E.0164 G1 X-43.548 Y56.668 E.78263 G2 X-43.92 Y56.505 I-.802 J1.328 E.01249 G1 X-25.548 Y38.134 E.79877 G1 X-25.548 Y37.752 E.01175 G1 X-25.166 Y37.752 E.01175 G1 X-21.662 Y34.248 E.15234 G1 X-22.196 Y34.248 E.0164 G1 X-44.342 Y56.394 E.96288 G2 X-44.833 Y56.351 I-.539 J3.346 E.01516 G1 X-22.729 Y34.248 E.96102 G1 X-23.263 Y34.248 E.0164 G1 X-45.709 Y56.695 E.97594 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.267 Y58.785 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.022 Y59.54 E.03282 G1 X-48.067 Y59.495 E.00197 G1 X-48.47 Y59.455 E.01246 G1 X-47.105 Y58.091 E.05933 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y59.173 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-23.796 Y34.248 E1.08371 G1 X-24.33 Y34.248 E.0164 G1 X-48.552 Y58.47 E1.05313 G1 X-48.552 Y57.936 E.0164 G1 X-24.864 Y34.248 E1.02993 G1 X-25.397 Y34.248 E.0164 G1 X-42.552 Y51.403 E.74586 G1 X-42.552 Y50.869 E.0164 G1 X-25.548 Y33.865 E.7393 G1 X-25.548 Y33.332 E.0164 G1 X-42.552 Y50.336 E.7393 G1 X-42.552 Y49.802 E.0164 G1 X-25.548 Y32.798 E.7393 G1 X-25.548 Y32.265 E.0164 G1 X-42.552 Y49.269 E.7393 G1 X-42.552 Y48.735 E.0164 G1 X-25.548 Y31.731 E.7393 G1 X-25.548 Y31.198 E.0164 G1 X-42.552 Y48.201 E.7393 G1 X-42.552 Y47.668 E.0164 G1 X-25.548 Y30.664 E.7393 G1 X-25.548 Y30.131 E.0164 G1 X-42.552 Y47.134 E.7393 G1 X-42.552 Y46.601 E.0164 G1 X-25.548 Y29.597 E.7393 G1 X-25.548 Y29.063 E.0164 G1 X-42.552 Y46.067 E.7393 G1 X-42.552 Y45.534 E.0164 G1 X-25.548 Y28.53 E.7393 G1 X-25.548 Y27.996 E.0164 G1 X-42.552 Y45 E.7393 G1 X-42.552 Y44.467 E.0164 G1 X-25.548 Y27.463 E.7393 G1 X-25.548 Y26.929 E.0164 G1 X-42.552 Y43.933 E.7393 G1 X-42.552 Y43.399 E.0164 G1 X-25.548 Y26.396 E.7393 G1 X-25.548 Y25.862 E.0164 G1 X-42.552 Y42.866 E.7393 G1 X-42.552 Y42.332 E.0164 G1 X-25.548 Y25.328 E.7393 G1 X-25.548 Y24.795 E.0164 G1 X-42.722 Y41.968 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.227 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y57.403 E.2315 G1 X-48.552 Y56.869 E.0164 G1 X-43.931 Y52.248 E.20092 G1 X-44.464 Y52.248 E.0164 G1 X-48.552 Y56.336 E.17772 G1 X-48.552 Y55.802 E.0164 G1 X-44.998 Y52.248 E.15452 G1 X-45.531 Y52.248 E.0164 G1 X-48.552 Y55.269 E.13133 G1 X-48.552 Y54.735 E.0164 G1 X-46.065 Y52.248 E.10813 G1 X-46.599 Y52.248 E.0164 G1 X-48.552 Y54.201 E.08493 G1 X-48.552 Y53.668 E.0164 G1 X-47.132 Y52.248 E.06173 G1 X-47.196 Y52.248 E.00197 G1 X-47.613 Y52.665 E.01812 G1 X-47.848 Y52.43 E.01021 G1 X-48.722 Y53.304 E.03799 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-47.848 Y52.43 G1 X-47.613 Y52.665 G1 X-47.307 Y52.359 ;WIPE_END G1 X-44.91 Y45.113 Z1.2 F30000 G1 X-30.982 Y3.017 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.178 Y1.214 E.07843 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-30.593 Y2.628 ;WIPE_END G1 X-24.836 Y7.639 Z1.2 F30000 G1 X4.778 Y33.418 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y10.245 E1.00755 G1 X27.952 Y9.711 E.0164 G1 X4.948 Y32.715 E1.00017 G1 X4.948 Y32.182 E.0164 G1 X27.952 Y9.178 E1.00017 G1 X27.952 Y8.644 E.0164 G1 X4.948 Y31.648 E1.00017 G1 X4.948 Y31.115 E.0164 G1 X27.952 Y8.111 E1.00017 G1 X27.952 Y7.577 E.0164 G1 X4.948 Y30.581 E1.00017 G1 X4.948 Y30.047 E.0164 G1 X27.952 Y7.044 E1.00017 G1 X27.952 Y6.51 E.0164 G1 X4.948 Y29.514 E1.00017 G1 X4.948 Y28.98 E.0164 G1 X27.952 Y5.977 E1.00017 G1 X27.952 Y5.443 E.0164 G1 X4.948 Y28.447 E1.00017 G1 X4.948 Y27.913 E.0164 M73 P18 R65 G1 X27.952 Y4.909 E1.00017 G1 X27.952 Y4.376 E.0164 G1 X4.948 Y27.38 E1.00017 G1 X4.948 Y26.846 E.0164 G1 X27.952 Y3.842 E1.00017 G1 X27.952 Y3.309 E.0164 G1 X4.948 Y26.312 E1.00017 G1 X4.948 Y25.779 E.0164 G1 X27.952 Y2.775 E1.00017 G1 X27.952 Y2.705 E.00216 G3 X27.098 Y3.095 I-1.669 J-2.522 E.02898 G1 X4.948 Y25.245 E.96306 G1 X4.948 Y24.712 E.0164 G1 X26.447 Y3.212 E.93476 G3 X25.916 Y3.211 I-.257 J-2.7 E.01637 G1 X4.948 Y24.178 E.91164 G1 X4.948 Y23.752 E.01311 G1 X4.841 Y23.752 E.0033 G1 X25.458 Y3.134 E.89642 G3 X25.05 Y3.009 I.432 J-2.136 E.01315 G1 X4.307 Y23.752 E.90186 G1 X3.774 Y23.752 E.0164 G1 X24.68 Y2.844 E.90901 G3 X24.352 Y2.64 I.873 J-1.765 E.01188 G1 X3.24 Y23.752 E.91793 G1 X2.707 Y23.752 E.0164 G1 X24.055 Y2.403 E.92822 G3 X23.789 Y2.136 I1.223 J-1.485 E.01162 G1 X2.173 Y23.752 E.93984 G1 X1.64 Y23.752 E.0164 G1 X23.553 Y1.838 E.95278 G3 X23.35 Y1.508 I4.735 J-3.138 E.01193 G1 X1.106 Y23.752 E.96715 G1 X.572 Y23.752 E.0164 G1 X23.186 Y1.138 E.98323 G3 X23.062 Y.728 I2.016 J-.835 E.01317 G1 X.039 Y23.752 E1.00103 G1 X-.495 Y23.752 E.0164 G1 X22.989 Y.269 E1.02102 G3 X22.988 Y-.265 I2.707 J-.268 E.01642 G1 X-1.028 Y23.752 E1.04421 G1 X-1.562 Y23.752 E.0164 G1 X7.942 Y14.248 E.41321 G1 X7.408 Y14.248 E.0164 G1 X-2.095 Y23.752 E.41321 G1 X-2.629 Y23.752 E.0164 G1 X6.875 Y14.248 E.41321 G1 X6.341 Y14.248 E.0164 G1 X-3.163 Y23.752 E.41321 G1 X-3.696 Y23.752 E.0164 G1 X5.808 Y14.248 E.41321 G1 X5.274 Y14.248 E.0164 G1 X-4.23 Y23.752 E.41321 G1 X-4.763 Y23.752 E.0164 G1 X4.741 Y14.248 E.41321 G1 X4.207 Y14.248 E.0164 G1 X-5.297 Y23.752 E.41321 G1 X-5.83 Y23.752 E.0164 G1 X3.673 Y14.248 E.41321 G1 X3.14 Y14.248 E.0164 G1 X-6.364 Y23.752 E.41321 G1 X-6.898 Y23.752 E.0164 G1 X2.606 Y14.248 E.41321 G1 X2.073 Y14.248 E.0164 G1 X-7.431 Y23.752 E.41321 G1 X-7.965 Y23.752 E.0164 G1 X1.539 Y14.248 E.41321 G1 X1.006 Y14.248 E.0164 G1 X-8.498 Y23.752 E.41321 G1 X-9.032 Y23.752 E.0164 G1 X.472 Y14.248 E.41321 G1 X-.062 Y14.248 E.0164 G1 X-9.565 Y23.752 E.41321 G1 X-10.099 Y23.752 E.0164 G1 X-.595 Y14.248 E.41321 G1 X-1.129 Y14.248 E.0164 G1 X-10.632 Y23.752 E.41321 G1 X-11.166 Y23.752 E.0164 G1 X-1.662 Y14.248 E.41321 G1 X-2.196 Y14.248 E.0164 G1 X-11.7 Y23.752 E.41321 G1 X-12.233 Y23.752 E.0164 G1 X-2.729 Y14.248 E.41321 G1 X-3.263 Y14.248 E.0164 G1 X-12.767 Y23.752 E.41321 G1 X-13.3 Y23.752 E.0164 G1 X-3.796 Y14.248 E.41321 G1 X-4.33 Y14.248 E.0164 G1 X-13.834 Y23.752 E.41321 G1 X-14.367 Y23.752 E.0164 G1 X-4.548 Y13.933 E.42693 G1 X-4.548 Y13.399 E.0164 G1 X-14.901 Y23.752 E.45013 G1 X-15.435 Y23.752 E.0164 G1 X-4.548 Y12.865 E.47333 G1 X-4.548 Y12.332 E.0164 G1 X-15.968 Y23.752 E.49652 G1 X-16.502 Y23.752 E.0164 G1 X-4.548 Y11.798 E.51972 G1 X-4.548 Y11.265 E.0164 G1 X-17.035 Y23.752 E.54292 G1 X-17.569 Y23.752 E.0164 G1 X-4.548 Y10.731 E.56612 G1 X-4.548 Y10.198 E.0164 G1 X-18.102 Y23.752 E.58932 G1 X-18.636 Y23.752 E.0164 G1 X-4.548 Y9.664 E.61252 G1 X-4.548 Y9.131 E.0164 G1 X-19.169 Y23.752 E.63572 G1 X-19.703 Y23.752 E.0164 G1 X-4.548 Y8.597 E.65891 G1 X-4.548 Y8.063 E.0164 G1 X-20.237 Y23.752 E.68211 G1 X-20.77 Y23.752 E.0164 G1 X-4.548 Y7.53 E.70531 G1 X-4.548 Y6.996 E.0164 G1 X-21.304 Y23.752 E.72851 G1 X-21.837 Y23.752 E.0164 G1 X-4.548 Y6.463 E.75171 G1 X-4.548 Y5.929 E.0164 G1 X-22.371 Y23.752 E.77491 G1 X-22.904 Y23.752 E.0164 G1 X-4.548 Y5.396 E.79811 G1 X-4.548 Y4.862 E.0164 G1 X-23.438 Y23.752 E.8213 G1 X-23.972 Y23.752 E.0164 G1 X-4.548 Y4.328 E.8445 G1 X-4.548 Y3.795 E.0164 G1 X-24.675 Y23.922 E.87508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y41.435 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.548 Y24.261 E.74668 G1 X-25.548 Y23.752 E.01566 G1 X-25.039 Y23.752 E.01566 G1 X-4.548 Y3.261 E.8909 G1 X-4.548 Y2.728 E.0164 G1 X-42.552 Y40.732 E1.65235 G1 X-42.552 Y40.198 E.0164 G1 X-16.602 Y14.248 E1.12827 G1 X-17.136 Y14.248 E.0164 G1 X-42.552 Y39.664 E1.10507 G1 X-42.552 Y39.131 E.0164 G1 X-17.669 Y14.248 E1.08187 G1 X-18.203 Y14.248 E.0164 G1 X-42.552 Y38.597 E1.05867 G1 X-42.552 Y38.064 E.0164 G1 X-18.736 Y14.248 E1.03547 G1 X-19.27 Y14.248 E.0164 G1 X-42.774 Y37.752 E1.02191 G1 X-43.307 Y37.752 E.0164 G1 X-19.803 Y14.248 E1.02191 G1 X-20.337 Y14.248 E.0164 G1 X-43.841 Y37.752 E1.02191 G1 X-44.374 Y37.752 E.0164 G1 X-20.87 Y14.248 E1.02191 G1 X-21.404 Y14.248 E.0164 G1 X-44.908 Y37.752 E1.02191 G1 X-45.441 Y37.752 E.0164 G1 X-21.938 Y14.248 E1.02191 G1 X-22.471 Y14.248 E.0164 G1 X-45.975 Y37.752 E1.02191 G1 X-46.509 Y37.752 E.0164 G1 X-23.005 Y14.248 E1.02191 G1 X-23.538 Y14.248 E.0164 G1 X-47.042 Y37.752 E1.02191 G1 X-47.576 Y37.752 E.0164 G1 X-24.072 Y14.248 E1.02191 G1 X-24.605 Y14.248 E.0164 G1 X-47.906 Y37.548 E1.01306 G1 X-48.439 Y37.548 E.0164 G1 X-43.139 Y32.248 E.23045 G1 X-43.673 Y32.248 E.0164 G1 X-48.552 Y37.127 E.21215 G1 X-48.552 Y36.594 E.0164 G1 X-44.206 Y32.248 E.18895 G1 X-44.74 Y32.248 E.0164 G1 X-48.552 Y36.06 E.16575 G1 X-48.552 Y35.527 E.0164 G1 X-45.273 Y32.248 E.14255 G1 X-45.807 Y32.248 E.0164 G1 X-48.552 Y34.993 E.11935 G1 X-48.552 Y34.46 E.0164 G1 X-46.34 Y32.248 E.09615 G1 X-46.874 Y32.248 E.0164 G1 X-48.552 Y33.926 E.07295 G1 X-48.552 Y33.392 E.0164 G1 X-47.408 Y32.248 E.04976 G1 X-47.838 Y32.248 E.01324 G1 X-47.838 Y32.452 E.00626 G1 X-48.145 Y32.452 E.00942 G1 X-48.722 Y33.029 E.02509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y31.831 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.139 Y14.248 E.76447 G1 X-25.673 Y14.248 E.0164 G1 X-42.552 Y31.127 E.73389 G1 X-42.552 Y30.594 E.0164 G1 X-26.206 Y14.248 E.71069 G1 X-26.74 Y14.248 E.0164 G1 X-42.552 Y30.06 E.68749 G1 X-42.552 Y29.527 E.0164 G1 X-27.273 Y14.248 E.66429 G1 X-27.807 Y14.248 E.0164 G1 X-42.552 Y28.993 E.6411 G1 X-42.552 Y28.46 E.0164 G1 X-28.34 Y14.248 E.6179 G1 X-28.874 Y14.248 E.0164 G1 X-42.552 Y27.926 E.5947 G1 X-42.552 Y27.392 E.0164 G1 X-29.348 Y14.189 E.57408 G1 X-29.348 Y13.655 E.0164 G1 X-42.552 Y26.859 E.57408 G1 X-42.552 Y26.325 E.0164 G1 X-29.348 Y13.122 E.57408 G1 X-29.348 Y12.588 E.0164 G1 X-42.552 Y25.792 E.57408 G1 X-42.552 Y25.258 E.0164 G1 X-29.348 Y12.054 E.57408 G1 X-29.348 Y11.521 E.0164 G1 X-42.552 Y24.725 E.57408 G1 X-42.552 Y24.191 E.0164 G1 X-29.348 Y10.987 E.57408 G1 X-29.348 Y10.454 E.0164 G1 X-42.552 Y23.658 E.57408 G1 X-42.552 Y23.124 E.0164 G1 X-29.348 Y9.92 E.57408 G1 X-29.348 Y9.387 E.0164 G1 X-42.552 Y22.59 E.57408 G1 X-42.552 Y22.057 E.0164 G1 X-29.348 Y8.853 E.57408 G1 X-29.348 Y8.32 E.0164 G1 X-42.552 Y21.523 E.57408 G1 X-42.552 Y20.99 E.0164 G1 X-29.476 Y7.914 E.56854 G3 X-30.136 Y8.04 I-.826 J-2.524 E.02072 G1 X-42.552 Y20.456 E.53984 G1 X-42.552 Y19.923 E.0164 G1 X-30.655 Y8.026 E.51724 G3 X-31.089 Y7.926 I.165 J-1.695 E.01371 G1 X-42.552 Y19.389 E.49841 G1 X-42.552 Y18.855 E.0164 G1 X-31.469 Y7.773 E.48186 G3 X-31.805 Y7.575 I.581 J-1.376 E.01202 G1 X-42.552 Y18.322 E.46724 G1 X-42.552 Y17.788 E.0164 G1 X-32.102 Y7.338 E.45436 G3 X-32.36 Y7.063 I.917 J-1.118 E.01164 G1 X-43.049 Y17.752 E.46475 G1 X-43.583 Y17.752 E.0164 G1 X-32.58 Y6.749 E.47839 G3 X-32.757 Y6.392 I5.162 J-2.779 E.01224 G1 X-44.116 Y17.752 E.4939 G1 X-44.65 Y17.752 E.0164 G1 X-32.881 Y5.983 E.51169 G3 X-32.943 Y5.512 I1.757 J-.473 E.01465 G1 X-45.183 Y17.752 E.53217 G1 X-45.717 Y17.752 E.0164 G1 X-32.683 Y4.718 E.56671 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-46.25 Y17.752 E.74226 G1 X-46.784 Y17.752 E.0164 G1 X-29.348 Y.316 E.75809 G1 X-29.348 Y-.217 E.0164 G1 X-47.317 Y17.752 E.78128 G1 X-47.838 Y17.752 E.01601 G1 X-29.348 Y-.751 E.8042 G1 X-29.348 Y-1.285 E.0164 G1 X-48.351 Y17.718 E.82621 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y13.868 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.548 Y2.194 E.50755 G1 X-4.548 Y1.661 E.0164 G1 X-16.052 Y13.164 E.50017 G1 X-16.052 Y12.631 E.0164 G1 X-4.548 Y1.127 E.50017 G1 X-4.548 Y.594 E.0164 G1 X-16.052 Y12.097 E.50017 G1 X-16.052 Y11.564 E.0164 G1 X-4.548 Y.06 E.50017 G1 X-4.548 Y-.474 E.0164 G1 X-16.052 Y11.03 E.50017 G1 X-16.052 Y10.497 E.0164 G1 X-4.548 Y-1.007 E.50017 G1 X-4.548 Y-1.541 E.0164 G1 X-16.222 Y10.133 E.50755 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.807 Y8.719 ;WIPE_END G1 X-7.337 Y10.282 Z1.2 F30000 G1 X8.578 Y13.612 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X23.395 Y-1.205 E.64419 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.74 Y-3.016 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.458 Y-4.734 E.07471 G1 X26.924 Y-4.734 E.0164 G1 X24.995 Y-2.805 E.08387 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.561 Y-4.904 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X8.748 Y12.908 E.77446 G1 X8.748 Y12.375 E.0164 G1 X25.857 Y-4.734 E.74388 G1 X25.324 Y-4.734 E.0164 G1 X8.748 Y11.841 E.72068 G1 X8.748 Y11.308 E.0164 G1 X24.79 Y-4.734 E.69749 G1 X24.257 Y-4.734 E.0164 G1 X8.748 Y10.774 E.67429 G1 X8.748 Y10.241 E.0164 G1 X23.723 Y-4.734 E.65109 G1 X23.189 Y-4.734 E.0164 G1 X12.205 Y6.25 E.4776 G3 X10.55 Y7.905 I-2.463 J-.809 E.07462 G1 X8.748 Y9.707 E.07836 G1 X8.748 Y9.173 E.0164 G1 X9.883 Y8.039 E.04933 G3 X9.359 Y8.028 I-.222 J-1.992 E.01614 G1 X8.578 Y8.81 E.03396 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.15 Y5.771 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X22.656 Y-4.734 E.45678 G1 X22.122 Y-4.734 E.0164 G1 X12.328 Y5.059 E.42582 G2 X12.23 Y4.624 I-4.381 J.762 E.01372 G1 X21.589 Y-4.734 E.4069 G1 X21.055 Y-4.734 E.0164 G1 X12.078 Y4.242 E.3903 G2 X11.882 Y3.905 I-1.38 J.576 E.01203 G1 X20.522 Y-4.734 E.37563 G1 X19.988 Y-4.734 E.0164 G1 X11.646 Y3.608 E.36269 G2 X11.372 Y3.348 I-1.122 J.912 E.01164 G1 X19.462 Y-4.742 E.35173 G2 X18.952 Y-4.752 I-.345 J4.413 E.01568 G1 X18.952 Y-4.765 E.00041 G1 X11.059 Y3.127 E.34315 G2 X10.705 Y2.948 I-2.981 J5.452 E.01221 G1 X18.934 Y-5.281 E.3578 G1 X18.934 Y-5.815 E.0164 G1 X10.298 Y2.822 E.37552 G2 X9.828 Y2.758 I-.479 J1.75 E.0146 G1 X18.934 Y-6.348 E.39592 G1 X18.934 Y-6.882 E.0164 G1 X9.262 Y2.79 E.42054 G2 X8.748 Y2.93 I.273 J2.022 E.01642 M73 P19 R65 G1 X8.748 Y2.771 E.00489 G1 X18.934 Y-7.416 E.44289 G1 X18.934 Y-7.949 E.0164 G1 X8.748 Y2.237 E.44289 G1 X8.748 Y1.704 E.0164 G1 X18.934 Y-8.483 E.44289 G1 X18.934 Y-9.016 E.0164 G1 X8.748 Y1.17 E.44289 G1 X8.748 Y.636 E.0164 G1 X18.934 Y-9.55 E.44289 G1 X18.934 Y-10.083 E.0164 G1 X8.748 Y.103 E.44289 G1 X8.748 Y-.431 E.0164 G1 X18.934 Y-10.617 E.44289 G1 X18.934 Y-11.151 E.0164 G1 X8.748 Y-.964 E.44289 G1 X8.748 Y-1.498 E.0164 G1 X18.934 Y-11.684 E.44289 G1 X18.934 Y-12.218 E.0164 G1 X8.748 Y-2.031 E.44289 G1 X8.748 Y-2.248 E.00666 G1 X8.431 Y-2.248 E.00974 G1 X18.934 Y-12.751 E.45666 G1 X18.934 Y-13.285 E.0164 G1 X7.898 Y-2.248 E.47986 G1 X7.364 Y-2.248 E.0164 G1 X18.934 Y-13.818 E.50306 G1 X18.934 Y-14.352 E.0164 G1 X6.831 Y-2.248 E.52626 G1 X6.297 Y-2.248 E.0164 G1 X18.934 Y-14.886 E.54946 G1 X18.934 Y-15.419 E.0164 G1 X5.763 Y-2.248 E.57266 G1 X5.23 Y-2.248 E.0164 G1 X18.934 Y-15.953 E.59585 G1 X18.934 Y-16.486 E.0164 G1 X4.696 Y-2.248 E.61905 G1 X4.163 Y-2.248 E.0164 G1 X18.934 Y-17.02 E.64225 G1 X18.934 Y-17.553 E.0164 G1 X3.629 Y-2.248 E.66545 G1 X3.096 Y-2.248 E.0164 G1 X18.934 Y-18.087 E.68865 G1 X18.934 Y-18.62 E.0164 G1 X2.562 Y-2.248 E.71185 G1 X2.028 Y-2.248 E.0164 G1 X18.934 Y-19.154 E.73505 G1 X18.934 Y-19.688 E.0164 G1 X1.495 Y-2.248 E.75824 G1 X.961 Y-2.248 E.0164 G1 X18.934 Y-20.221 E.78144 G1 X18.934 Y-20.755 E.0164 G1 X.428 Y-2.248 E.80464 G1 X-.106 Y-2.248 E.0164 G1 X18.934 Y-21.288 E.82784 G1 X18.934 Y-21.822 E.0164 G1 X-.639 Y-2.248 E.85104 G1 X-1.173 Y-2.248 E.0164 G1 X18.934 Y-22.355 E.87424 G1 X18.934 Y-22.889 E.0164 G1 X-1.706 Y-2.248 E.89744 G1 X-2.24 Y-2.248 E.0164 G1 X18.934 Y-23.423 E.92063 G1 X18.934 Y-23.956 E.0164 G1 X-2.774 Y-2.248 E.94383 G1 X-3.307 Y-2.248 E.0164 G1 X18.934 Y-24.49 E.96703 G1 X18.934 Y-25.023 E.0164 G1 X-4.01 Y-2.078 E.99761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y9.599 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X18.934 Y-25.557 E1.52853 G1 X18.934 Y-26.09 E.0164 G1 X-16.052 Y8.896 E1.52116 G1 X-16.052 Y8.362 E.0164 G1 X18.934 Y-26.624 E1.52116 G1 X18.934 Y-27.157 E.0164 G1 X-16.052 Y7.829 E1.52116 G1 X-16.052 Y7.295 E.0164 G1 X18.934 Y-27.691 E1.52116 G1 X18.934 Y-28.225 E.0164 G1 X-16.052 Y6.762 E1.52116 G1 X-16.052 Y6.228 E.0164 G1 X18.934 Y-28.758 E1.52116 G1 X18.934 Y-29.292 E.0164 G1 X-16.052 Y5.695 E1.52116 G1 X-16.052 Y5.161 E.0164 G1 X18.934 Y-29.825 E1.52116 G1 X18.934 Y-30.359 E.0164 G1 X-16.052 Y4.627 E1.52116 G1 X-16.052 Y4.094 E.0164 G1 X18.934 Y-30.892 E1.52116 G1 X18.934 Y-31.426 E.0164 G1 X-16.052 Y3.56 E1.52116 G1 X-16.052 Y3.027 E.0164 G1 X18.934 Y-31.96 E1.52116 G1 X18.934 Y-32.493 E.0164 G1 X-16.052 Y2.493 E1.52116 G1 X-16.052 Y1.96 E.0164 G1 X18.934 Y-33.027 E1.52116 G1 X18.934 Y-33.56 E.0164 G1 X-16.052 Y1.426 E1.52116 G1 X-16.052 Y.893 E.0164 G1 X18.934 Y-34.094 E1.52116 G1 X18.934 Y-34.627 E.0164 G1 X-16.052 Y.359 E1.52116 G1 X-16.052 Y-.175 E.0164 G1 X18.934 Y-35.161 E1.52116 G1 X18.934 Y-35.694 E.0164 G1 X-16.052 Y-.708 E1.52116 G1 X-16.052 Y-1.242 E.0164 G1 X18.934 Y-36.228 E1.52116 G1 X18.934 Y-36.762 E.0164 G1 X-16.052 Y-1.775 E1.52116 G1 X-16.052 Y-2.248 E.01454 G1 X-16.113 Y-2.248 E.00187 G1 X18.934 Y-37.295 E1.5238 G1 X18.934 Y-37.829 E.0164 G1 X-16.646 Y-2.248 E1.547 G1 X-17.18 Y-2.248 E.0164 G1 X18.934 Y-38.362 E1.57019 G1 X18.934 Y-38.896 E.0164 G1 X-17.713 Y-2.248 E1.59339 G1 X-18.247 Y-2.248 E.0164 G1 X18.934 Y-39.429 E1.61659 G1 X18.934 Y-39.963 E.0164 G1 X-18.78 Y-2.248 E1.63979 G1 X-19.314 Y-2.248 E.0164 G1 X18.934 Y-40.497 E1.66299 G1 X18.934 Y-41.03 E.0164 G1 X-19.848 Y-2.248 E1.68619 G1 X-20.381 Y-2.248 E.0164 G1 X18.934 Y-41.564 E1.70939 G1 X18.934 Y-42.097 E.0164 G1 X-20.915 Y-2.248 E1.73258 G1 X-21.448 Y-2.248 E.0164 G1 X18.934 Y-42.631 E1.75578 G1 X18.934 Y-43.164 E.0164 G1 X-21.982 Y-2.248 E1.77898 G1 X-22.515 Y-2.248 E.0164 G1 X18.934 Y-43.698 E1.80218 G1 X18.934 Y-44.231 E.0164 G1 X-23.049 Y-2.248 E1.82538 G1 X-23.583 Y-2.248 E.0164 G1 X18.934 Y-44.765 E1.84858 G1 X18.934 Y-45.299 E.0164 G1 X-24.116 Y-2.248 E1.87178 G1 X-24.65 Y-2.248 E.0164 G1 X18.934 Y-45.832 E1.89497 G1 X18.934 Y-46.366 E.0164 G1 X-25.183 Y-2.248 E1.91817 G1 X-25.717 Y-2.248 E.0164 G1 X18.934 Y-46.899 E1.94137 G1 X18.934 Y-47.433 E.0164 G1 X-26.25 Y-2.248 E1.96457 G1 X-26.784 Y-2.248 E.0164 G1 X18.934 Y-47.966 E1.98777 G1 X18.934 Y-48.5 E.0164 G1 X-27.317 Y-2.248 E2.01097 G1 X-27.851 Y-2.248 E.0164 G1 X18.934 Y-49.034 E2.03417 G1 X18.934 Y-49.567 E.0164 G1 X-28.554 Y-2.078 E2.06474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y17.555 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.348 Y-1.818 E.84233 G1 X-29.348 Y-2.248 E.01322 G1 X-28.918 Y-2.248 E.01322 G1 X18.934 Y-50.101 E2.08056 G1 X18.934 Y-50.634 E.0164 G1 X-48.552 Y16.852 E2.93421 G1 X-48.552 Y16.318 E.0164 G1 X18.934 Y-51.168 E2.93421 G1 X18.934 Y-51.701 E.0164 G1 X-48.722 Y15.955 E2.94159 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-47.307 Y14.54 ;WIPE_END G1 X-41.561 Y9.518 Z1.2 F30000 G1 X28.933 Y-52.096 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X30.952 Y-54.115 E.08777 G1 X30.952 Y-54.648 E.0164 G1 X28.569 Y-52.266 E.1036 G1 X28.036 Y-52.266 E.0164 G1 X30.952 Y-55.182 E.12679 G1 X30.952 Y-55.715 E.0164 G1 X27.502 Y-52.266 E.14999 G1 X26.969 Y-52.266 E.0164 G1 X30.952 Y-56.249 E.17319 G1 X30.952 Y-56.783 E.0164 G1 X26.435 Y-52.266 E.19639 G1 X25.901 Y-52.266 E.0164 G1 X30.952 Y-57.316 E.21959 G1 X30.952 Y-57.85 E.0164 G1 X25.368 Y-52.266 E.24279 G1 X24.834 Y-52.266 E.0164 G1 X30.952 Y-58.383 E.26599 G1 X30.952 Y-58.917 E.0164 G1 X24.301 Y-52.266 E.28918 G1 X23.767 Y-52.266 E.0164 G1 X30.952 Y-59.45 E.31238 G1 X30.952 Y-59.752 E.00927 G1 X30.72 Y-59.752 E.00713 G1 X23.234 Y-52.266 E.32549 G1 X22.7 Y-52.266 E.0164 G1 X30.186 Y-59.752 E.32549 G1 X29.653 Y-59.752 E.0164 G1 X22.166 Y-52.266 E.32549 G1 X21.633 Y-52.266 E.0164 G1 X29.119 Y-59.752 E.32549 G1 X28.586 Y-59.752 E.0164 G1 X21.099 Y-52.266 E.32549 G1 X20.566 Y-52.266 E.0164 G1 X28.052 Y-59.752 E.32549 G1 X27.519 Y-59.752 E.0164 G1 X20.032 Y-52.266 E.32549 G1 X19.499 Y-52.266 E.0164 G1 X26.985 Y-59.752 E.32549 G1 X26.451 Y-59.752 E.0164 G1 X-48.552 Y15.251 E3.26104 G1 X-48.552 Y14.718 E.0164 G1 X25.918 Y-59.752 E3.23784 G1 X25.384 Y-59.752 E.0164 G1 X-48.552 Y14.184 E3.21464 G1 X-48.552 Y13.651 E.0164 G1 X24.851 Y-59.752 E3.19144 G1 X24.317 Y-59.752 E.0164 G1 X-48.552 Y13.117 E3.16824 G1 X-48.552 Y12.584 E.0164 G1 X23.784 Y-59.752 E3.14505 G1 X23.25 Y-59.752 E.0164 G1 X-15.7 Y-20.802 E1.69348 G2 X-15.655 Y-21.38 I-2.732 J-.501 E.01786 G1 X22.716 Y-59.752 E1.66835 G1 X22.183 Y-59.752 E.0164 G1 X-15.716 Y-21.853 E1.64777 G2 X-15.838 Y-22.264 I-1.622 J.26 E.01322 G1 X21.649 Y-59.752 E1.6299 G1 X21.116 Y-59.752 E.0164 G1 X14.948 Y-53.584 E.26816 G1 X14.948 Y-54.118 E.0164 G1 X20.582 Y-59.752 E.24496 G1 X20.049 Y-59.752 E.0164 G1 X14.948 Y-54.651 E.22176 G1 X14.948 Y-55.185 E.0164 G1 X19.515 Y-59.752 E.19856 G1 X18.981 Y-59.752 E.0164 G1 X14.948 Y-55.719 E.17537 G1 X14.948 Y-56.252 E.0164 G1 X18.448 Y-59.752 E.15217 G1 X17.914 Y-59.752 E.0164 G1 X14.948 Y-56.786 E.12897 G1 X14.948 Y-57.319 E.0164 G1 X17.381 Y-59.752 E.10577 G1 X16.847 Y-59.752 E.0164 G1 X14.948 Y-57.853 E.08257 G1 X14.948 Y-58.386 E.0164 G1 X16.314 Y-59.752 E.05937 G1 X15.78 Y-59.752 E.0164 G1 X14.948 Y-58.92 E.03617 G1 X14.948 Y-59.453 E.0164 G1 X15.416 Y-59.922 E.02035 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.285 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-16.012 Y-22.624 E1.31728 G2 X-16.23 Y-22.94 I-1.306 J.672 E.01182 G1 X13.582 Y-52.752 E1.2962 G1 X13.049 Y-52.752 E.0164 G1 X-16.487 Y-23.216 E1.28417 G2 X-16.782 Y-23.455 I-1.054 J1.001 E.0117 G1 X12.515 Y-52.752 E1.27379 G1 X11.981 Y-52.752 E.0164 G1 X-17.117 Y-23.654 E1.26515 G2 X-17.496 Y-23.808 I-.777 J1.362 E.01262 G1 X11.448 Y-52.752 E1.25842 G1 X10.914 Y-52.752 E.0164 G1 X-17.927 Y-23.911 E1.25397 G1 X-17.957 Y-23.917 E.00096 G2 X-18.442 Y-23.93 I-.308 J2.478 E.01492 G1 X10.55 Y-52.922 E1.26053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.585 Y-18.916 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y12.05 E1.34638 G1 X-48.552 Y11.516 E.0164 G1 X-18.392 Y-18.643 E1.3113 G3 X-18.865 Y-18.704 I-.008 J-1.828 E.01471 G1 X-48.552 Y10.983 E1.29073 G1 X-48.552 Y10.449 E.0164 G1 X-19.276 Y-18.827 E1.27289 G1 X-19.311 Y-18.838 E.00115 G3 X-19.636 Y-19 I.454 J-1.315 E.0112 G1 X-48.552 Y9.916 E1.25721 G1 X-48.552 Y9.382 E.0164 G1 X-19.951 Y-19.218 E1.24351 G3 X-20.228 Y-19.475 I.837 J-1.179 E.01164 G1 X-48.552 Y8.849 E1.23147 G1 X-48.552 Y8.315 E.0164 G1 X-20.467 Y-19.77 E1.2211 G3 X-20.666 Y-20.105 I1.172 J-.922 E.012 G1 X-48.552 Y7.781 E1.21245 G1 X-48.552 Y7.248 E.0164 G1 X-20.82 Y-20.484 E1.20573 G3 X-20.923 Y-20.915 I1.587 J-.605 E.01366 G1 X-48.552 Y6.714 E1.20128 G1 X-48.552 Y6.181 E.0164 G1 X-20.76 Y-21.612 E1.20837 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.78 Y2.876 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y5.647 E.12051 G1 X-48.552 Y5.114 E.0164 G1 X-46.656 Y3.218 E.08244 G3 X-47.173 Y3.201 I-.143 J-3.548 E.01591 G1 X-48.552 Y4.58 E.05997 G1 X-48.552 Y4.047 E.0164 G1 X-47.62 Y3.115 E.04051 G3 X-48.022 Y2.983 I.466 J-2.107 E.01303 G1 X-48.722 Y3.683 E.0304 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.924 Y1.02 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.824 Y-22.08 E1.00435 G3 X-19.092 Y-23.813 I2.492 J.759 E.07842 G1 X9.847 Y-52.752 E1.25824 G1 X9.314 Y-52.752 E.0164 G1 X-43.582 Y.144 E2.29985 G2 X-43.599 Y-.373 I-3.548 J-.143 E.01591 G1 X8.78 Y-52.752 E2.27738 G1 X8.247 Y-52.752 E.0164 G1 X-43.685 Y-.82 E2.25792 G2 X-43.817 Y-1.222 I-2.107 J.466 E.01303 G1 X-40.287 Y-4.752 E.15346 G1 X-40.821 Y-4.752 E.0164 G1 X-43.992 Y-1.58 E.1379 G2 X-44.202 Y-1.904 I-1.748 J.904 E.01188 G1 X-41.184 Y-4.922 E.13121 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-5.317 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X7.713 Y-52.752 E2.06239 G1 X7.179 Y-52.752 E.0164 G1 X-39.552 Y-6.021 E2.03181 G1 X-39.552 Y-6.554 E.0164 G1 X6.646 Y-52.752 E2.00861 G1 X6.452 Y-52.752 E.00596 G1 X6.452 Y-53.091 E.01044 G1 X-39.552 Y-7.088 E2.00018 G1 X-39.552 Y-7.621 E.0164 G1 X6.452 Y-53.625 E2.00018 G1 X6.452 Y-54.159 E.0164 G1 X-39.552 Y-8.155 E2.00018 G1 X-39.552 Y-8.688 E.0164 G1 X6.452 Y-54.692 E2.00018 G1 X6.452 Y-55.226 E.0164 G1 X-39.552 Y-9.222 E2.00018 G1 X-39.552 Y-9.756 E.0164 G1 X6.452 Y-55.759 E2.00018 G1 X6.452 Y-56.293 E.0164 G1 X-39.552 Y-10.289 E2.00018 G1 X-39.552 Y-10.823 E.0164 G1 X6.452 Y-56.826 E2.00018 G1 X6.452 Y-57.36 E.0164 G1 X-39.552 Y-11.356 E2.00018 G1 X-39.552 Y-11.89 E.0164 G1 X6.452 Y-57.894 E2.00018 G1 X6.452 Y-58.427 E.0164 G1 X-39.552 Y-12.423 E2.00018 G1 X-39.552 Y-12.957 E.0164 G1 X6.452 Y-58.961 E2.00018 G1 X6.452 Y-59.494 E.0164 G1 X-39.552 Y-13.49 E2.00018 G1 X-39.552 Y-14.024 E.0164 G1 X6.176 Y-59.752 E1.98818 G1 X5.642 Y-59.752 E.0164 G1 X-15.866 Y-38.244 E.93515 G3 X-17.256 Y-36.854 I-2.412 J-1.022 E.06195 G1 X-33.448 Y-20.662 E.70402 G2 X-33.376 Y-21.267 I-2.265 J-.578 E.01881 G1 X-17.985 Y-36.658 E.66916 G3 X-18.525 Y-36.652 I-.292 J-2.045 E.01663 G1 X-33.417 Y-21.76 E.6475 G2 X-33.522 Y-22.188 I-1.679 J.186 E.0136 G1 X-18.974 Y-36.736 E.63252 G1 X-19.375 Y-36.869 E.01297 G1 X-33.676 Y-22.568 E.62179 G2 X-33.87 Y-22.907 I-1.385 J.569 E.01205 G1 X-19.721 Y-37.056 E.6152 G3 X-20.027 Y-37.284 I.713 J-1.275 E.01176 G1 X-34.102 Y-23.209 E.61196 G2 X-34.368 Y-23.477 I-1.149 J.877 E.01163 G1 X-20.294 Y-37.55 E.6119 G3 X-20.523 Y-37.855 I1.041 J-1.023 E.01175 G1 X-34.669 Y-23.709 E.61502 G2 X-35.006 Y-23.905 I-.913 J1.184 E.01204 G1 X-20.712 Y-38.199 E.62148 G3 X-20.856 Y-38.589 I1.409 J-.741 E.01281 G1 X-35.385 Y-24.06 E.63168 G2 X-35.811 Y-24.168 I-.62 J1.566 E.01356 G1 X-20.928 Y-39.051 E.64711 G3 X-20.932 Y-39.581 I1.592 J-.277 E.01636 M73 P19 R64 G1 X-36.48 Y-24.032 E.67603 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-35.066 Y-25.446 ;WIPE_END G1 X-35.43 Y-18.679 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.552 Y-14.558 E.17921 G1 X-39.552 Y-15.091 E.0164 G1 X-36.097 Y-18.546 E.1502 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.881 Y-38.762 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X5.109 Y-59.752 E.91259 G1 X4.575 Y-59.752 E.0164 G1 X-15.664 Y-39.513 E.87997 G2 X-15.739 Y-39.971 I-1.779 J.056 E.01433 G1 X4.042 Y-59.752 E.86004 G1 X3.508 Y-59.752 E.0164 G1 X-15.881 Y-40.363 E.84301 G2 X-16.068 Y-40.709 I-1.408 J.539 E.01214 G1 X2.975 Y-59.752 E.82796 G1 X2.441 Y-59.752 E.0164 G1 X-16.296 Y-41.015 E.81466 G2 X-16.562 Y-41.282 I-1.149 J.877 E.01163 G1 X1.907 Y-59.752 E.80304 G1 X1.374 Y-59.752 E.0164 G1 X-16.866 Y-41.511 E.79307 G2 X-17.211 Y-41.7 I-.89 J1.215 E.01212 G1 X.84 Y-59.752 E.78485 G1 X.307 Y-59.752 E.0164 G1 X-17.601 Y-41.844 E.7786 G2 X-18.059 Y-41.92 I-.771 J3.234 E.01427 G1 X-.227 Y-59.752 E.7753 G1 X-.76 Y-59.752 E.0164 G1 X-18.8 Y-41.713 E.78432 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.124 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.318 Y-41.736 E.79085 G2 X-20.752 Y-40.294 I1.09 J2.518 E.06406 G1 X-36.9 Y-24.145 E.70211 G2 X-37.737 Y-23.835 I.649 J3.028 E.02753 G1 X-1.827 Y-59.752 E1.56146 G1 X-2.361 Y-59.752 E.0164 G1 X-39.478 Y-22.635 E1.61378 G1 X-39.552 Y-22.648 E.00231 G1 X-39.552 Y-23.095 E.01374 G1 X-2.895 Y-59.752 E1.59381 G1 X-3.428 Y-59.752 E.0164 G1 X-39.552 Y-23.628 E1.57061 G1 X-39.552 Y-24.162 E.0164 G1 X-3.962 Y-59.752 E1.54741 G1 X-4.495 Y-59.752 E.0164 G1 X-39.552 Y-24.695 E1.52421 G1 X-39.552 Y-25.229 E.0164 G1 X-5.029 Y-59.752 E1.50101 G1 X-5.562 Y-59.752 E.0164 G1 X-39.552 Y-25.762 E1.47782 G1 X-39.552 Y-26.296 E.0164 G1 X-6.096 Y-59.752 E1.45462 G1 X-6.63 Y-59.752 E.0164 G1 X-39.552 Y-26.83 E1.43142 G1 X-39.552 Y-27.363 E.0164 G1 X-7.163 Y-59.752 E1.40822 G1 X-7.697 Y-59.752 E.0164 G1 X-39.552 Y-27.897 E1.38502 G1 X-39.552 Y-28.43 E.0164 G1 X-8.23 Y-59.752 E1.36182 G1 X-8.764 Y-59.752 E.0164 G1 X-39.552 Y-28.964 E1.33862 G1 X-39.552 Y-29.497 E.0164 G1 X-9.297 Y-59.752 E1.31543 G1 X-9.831 Y-59.752 E.0164 G1 X-39.552 Y-30.031 E1.29223 G1 X-39.552 Y-30.564 E.0164 G1 X-10.364 Y-59.752 E1.26903 G1 X-10.898 Y-59.752 E.0164 G1 X-39.552 Y-31.098 E1.24583 G1 X-39.552 Y-31.632 E.0164 G1 X-11.432 Y-59.752 E1.22263 G1 X-11.965 Y-59.752 E.0164 G1 X-33.644 Y-38.073 E.94256 G3 X-35.085 Y-36.632 I-2.593 J-1.151 E.06409 G1 X-39.552 Y-32.165 E.19421 G1 X-39.552 Y-32.699 E.0164 G1 X-35.85 Y-36.401 E.16097 G3 X-36.414 Y-36.37 I-.467 J-3.34 E.01741 G1 X-39.722 Y-33.063 E.14379 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.629 Y-38.622 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-12.499 Y-59.752 E.91871 G1 X-13.032 Y-59.752 E.0164 G1 X-33.382 Y-39.402 E.88476 G2 X-33.44 Y-39.877 I-1.833 J-.014 E.01475 G1 X-13.566 Y-59.752 E.86412 G1 X-14.099 Y-59.752 E.0164 G1 X-33.558 Y-40.293 E.84604 G2 X-33.723 Y-40.662 I-1.484 J.44 E.01246 G1 X-14.633 Y-59.752 E.82999 G1 X-15.167 Y-59.752 E.0164 G1 X-33.927 Y-40.992 E.81568 G2 X-34.168 Y-41.284 I-1.233 J.767 E.01169 G1 X-15.7 Y-59.752 E.80294 G1 X-16.234 Y-59.752 E.0164 G1 X-34.443 Y-41.543 E.79171 G2 X-34.753 Y-41.766 I-1.003 J1.067 E.01179 G1 X-16.767 Y-59.752 E.78201 G1 X-17.301 Y-59.752 E.0164 G1 X-35.101 Y-41.952 E.77392 G2 X-35.49 Y-42.096 I-.743 J1.406 E.0128 G1 X-17.834 Y-59.752 E.76764 G1 X-18.368 Y-59.752 E.0164 G1 X-35.93 Y-42.19 E.76358 G2 X-36.449 Y-42.204 I-.314 J1.964 E.01601 G1 X-18.901 Y-59.752 E.76295 G1 X-19.435 Y-59.752 E.0164 G1 X-37.081 Y-42.106 E.76721 G2 X-38.094 Y-41.598 I.743 J2.745 E.03509 G1 X-38.108 Y-41.612 E.00062 G1 X-19.969 Y-59.752 E.7887 G1 X-20.502 Y-59.752 E.0164 G1 X-27.052 Y-53.202 E.28477 G1 X-27.052 Y-52.752 E.01384 G1 X-27.502 Y-52.752 E.01384 M73 P20 R64 G1 X-39.552 Y-40.702 E.5239 G1 X-39.552 Y-41.236 E.0164 G1 X-28.036 Y-52.752 E.50071 G1 X-28.569 Y-52.752 E.0164 G1 X-39.552 Y-41.769 E.47751 G1 X-39.552 Y-42.303 E.0164 G1 X-29.103 Y-52.752 E.45431 G1 X-29.636 Y-52.752 E.0164 G1 X-39.552 Y-42.836 E.43111 G1 X-39.552 Y-43.37 E.0164 G1 X-30.17 Y-52.752 E.40791 G1 X-30.704 Y-52.752 E.0164 G1 X-39.552 Y-43.904 E.38471 G1 X-39.552 Y-44.437 E.0164 G1 X-31.237 Y-52.752 E.36151 G1 X-31.771 Y-52.752 E.0164 G1 X-39.552 Y-44.971 E.33832 G1 X-39.552 Y-45.504 E.0164 G1 X-32.304 Y-52.752 E.31512 G1 X-32.838 Y-52.752 E.0164 G1 X-39.552 Y-46.038 E.29192 G1 X-39.552 Y-46.571 E.0164 G1 X-33.371 Y-52.752 E.26872 G1 X-33.905 Y-52.752 E.0164 G1 X-39.552 Y-47.105 E.24552 G1 X-39.552 Y-47.638 E.0164 G1 X-34.438 Y-52.752 E.22232 G1 X-34.972 Y-52.752 E.0164 G1 X-39.552 Y-48.172 E.19912 G1 X-39.552 Y-48.706 E.0164 G1 X-35.506 Y-52.752 E.17593 G1 X-35.548 Y-52.752 E.00131 G1 X-35.548 Y-53.243 E.0151 G1 X-39.552 Y-49.239 E.17408 G1 X-39.552 Y-49.773 E.0164 G1 X-35.548 Y-53.777 E.17408 G1 X-35.548 Y-54.31 E.0164 G1 X-39.552 Y-50.306 E.17408 G1 X-39.552 Y-50.84 E.0164 G1 X-35.548 Y-54.844 E.17408 G1 X-35.548 Y-55.377 E.0164 G1 X-39.552 Y-51.373 E.17408 G1 X-39.552 Y-51.907 E.0164 G1 X-35.548 Y-55.911 E.17408 G1 X-35.548 Y-56.444 E.0164 G1 X-39.744 Y-52.248 E.18245 G1 X-40.278 Y-52.248 E.0164 G1 X-35.548 Y-56.978 E.20565 G1 X-35.548 Y-57.511 E.0164 G1 X-40.811 Y-52.248 E.22884 G1 X-41.345 Y-52.248 E.0164 G1 X-35.548 Y-58.045 E.25204 G1 X-35.548 Y-58.579 E.0164 G1 X-41.879 Y-52.248 E.27524 G1 X-42.412 Y-52.248 E.0164 G1 X-35.548 Y-59.112 E.29844 G1 X-35.548 Y-59.646 E.0164 G1 X-42.946 Y-52.248 E.32164 G1 X-43.479 Y-52.248 E.0164 G1 X-35.976 Y-59.752 E.32625 G1 X-36.509 Y-59.752 E.0164 G1 X-44.013 Y-52.248 E.32625 G1 X-44.546 Y-52.248 E.0164 G1 X-37.043 Y-59.752 E.32625 G1 X-37.576 Y-59.752 E.0164 G1 X-45.08 Y-52.248 E.32625 G1 X-45.614 Y-52.248 E.0164 G1 X-38.11 Y-59.752 E.32625 G1 X-38.643 Y-59.752 E.0164 G1 X-46.147 Y-52.248 E.32625 G1 X-46.681 Y-52.248 E.0164 G1 X-39.177 Y-59.752 E.32625 G1 X-39.71 Y-59.752 E.0164 G1 X-47.214 Y-52.248 E.32625 G1 X-47.748 Y-52.248 E.0164 G1 X-40.244 Y-59.752 E.32625 G1 X-40.778 Y-59.752 E.0164 G1 X-48.281 Y-52.248 E.32625 G1 X-48.815 Y-52.248 E.0164 G1 X-41.311 Y-59.752 E.32625 G1 X-41.845 Y-59.752 E.0164 G1 X-49.348 Y-52.248 E.32625 G1 X-49.882 Y-52.248 E.0164 G1 X-42.378 Y-59.752 E.32625 G1 X-42.912 Y-59.752 E.0164 G1 X-50.416 Y-52.248 E.32625 G1 X-50.949 Y-52.248 E.0164 G1 X-43.445 Y-59.752 E.32625 G1 X-43.979 Y-59.752 E.0164 G1 X-51.483 Y-52.248 E.32625 G1 X-51.552 Y-52.248 E.00213 G1 X-51.552 Y-52.713 E.01428 G1 X-44.513 Y-59.752 E.30606 G1 X-45.046 Y-59.752 E.0164 G1 X-51.552 Y-53.246 E.28286 G1 X-51.552 Y-53.78 E.0164 G1 X-45.58 Y-59.752 E.25967 G1 X-46.113 Y-59.752 E.0164 G1 X-51.552 Y-54.313 E.23647 G1 X-51.552 Y-54.847 E.0164 G1 X-46.647 Y-59.752 E.21327 G1 X-47.18 Y-59.752 E.0164 G1 X-51.552 Y-55.38 E.19007 G1 X-51.552 Y-55.914 E.0164 G1 X-47.714 Y-59.752 E.16687 G1 X-48.247 Y-59.752 E.0164 G1 X-51.552 Y-56.447 E.14367 G1 X-51.552 Y-56.981 E.0164 G1 X-48.781 Y-59.752 E.12047 G1 X-49.315 Y-59.752 E.0164 G1 X-51.552 Y-57.515 E.09728 G1 X-51.552 Y-58.048 E.0164 G1 X-49.848 Y-59.752 E.07408 G1 X-50.382 Y-59.752 E.0164 G1 X-51.552 Y-58.582 E.05088 G1 X-51.552 Y-59.115 E.0164 G1 X-50.746 Y-59.922 E.03506 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.552 Y-59.115 G1 X-51.552 Y-58.582 G1 X-51.321 Y-58.812 ;WIPE_END G1 X-43.863 Y-57.189 Z1.2 F30000 G1 X-27.222 Y-53.566 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-21.036 Y-59.752 E.26895 G1 X-21.569 Y-59.752 E.0164 G1 X-27.052 Y-54.269 E.23838 G1 X-27.052 Y-54.803 E.0164 G1 X-22.103 Y-59.752 E.21518 G1 X-22.636 Y-59.752 E.0164 G1 X-27.052 Y-55.336 E.19198 G1 X-27.052 Y-55.87 E.0164 G1 X-23.17 Y-59.752 E.16878 G1 X-23.704 Y-59.752 E.0164 G1 X-27.052 Y-56.404 E.14558 G1 X-27.052 Y-56.937 E.0164 G1 X-24.237 Y-59.752 E.12238 G1 X-24.771 Y-59.752 E.0164 G1 X-27.052 Y-57.471 E.09918 G1 X-27.052 Y-58.004 E.0164 G1 X-25.304 Y-59.752 E.07599 G1 X-25.838 Y-59.752 E.0164 G1 X-27.052 Y-58.538 E.05279 G1 X-27.052 Y-59.071 E.0164 G1 X-26.202 Y-59.922 E.03697 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-27.052 Y-59.071 G1 X-27.052 Y-58.538 G1 X-26.865 Y-58.725 ;WIPE_END G1 X-23.26 Y-51.997 Z1.2 F30000 G1 X8.901 Y8.011 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X8.838 Y8.048 E.00204 G1 X8.903 Y8.082 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.405 Y59.464 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.504648 G1 F15000 G2 X21.414 Y59.548 I-.028 J.046 E.0089 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X21.405 Y59.564 G1 X21.347 Y59.564 G1 X21.318 Y59.514 G1 X21.347 Y59.464 G1 X21.405 Y59.464 ;WIPE_END G1 X27.39 Y59.19 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397572 G1 F15000 G2 X27.383 Y58.547 I-4.887 J-.268 E.0186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.311 Y56.28 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.554982 G1 F14945.575 G1 X26.707 Y56.884 E.03566 G1 X26.857 Y57.065 E.00981 G1 X27.204 Y57.666 E.02896 G1 X27.267 Y57.819 E.0069 ;WIDTH:0.531951 G1 F15000 G1 X27.305 Y58.048 E.00926 ;WIDTH:0.485887 G1 X27.343 Y58.278 E.00839 ;WIDTH:0.439824 G1 X27.38 Y58.507 E.00752 G1 X27.357 Y58.276 E.00752 ;WIDTH:0.485887 G1 X27.334 Y58.044 E.00839 ;WIDTH:0.548776 G1 X27.311 Y57.813 E.00958 G1 X27.311 Y56.32 E.06154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.756 Y55.207 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.078 Y56.885 E.07291 G1 X26.442 Y57.248 E.01581 G1 X26.819 Y57.888 E.02283 G1 X27.018 Y58.604 E.02282 G3 X26.983 Y59.556 I-3.859 J.335 E.02933 G1 X27.756 Y59.556 E.02375 G1 X27.756 Y55.247 E.1324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X27.756 Y57.247 ;WIPE_END G1 X22.735 Y51.498 Z1.2 F30000 G1 X-42.652 Y-23.367 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:1 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;1 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.4 I-.257 J1.19 P1 F30000 G1 X49.363 Y-1.728 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.523 Y-1.782 E.00559 G3 X49.829 Y-1.834 I.455 J1.737 E.01031 G3 X49.077 Y-1.598 I.164 J1.835 E.35774 G3 X49.294 Y-1.705 I.901 J1.554 E.00801 G1 X49.325 Y-1.715 E.00109 G1 X49.503 Y-1.316 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3300 G1 X49.636 Y-1.359 E.0043 G1 X49.857 Y-1.4 E.00691 G1 F3540 G1 X50.184 Y-1.397 E.01005 G1 X50.365 Y-1.361 E.00567 G1 X50.539 Y-1.302 E.00565 G1 X50.705 Y-1.221 E.00568 G1 X50.858 Y-1.118 E.00567 G1 X51.024 Y-.966 E.00692 G1 X51.221 Y-.705 E.01005 G1 X51.302 Y-.539 E.00568 G1 X51.361 Y-.365 E.00565 G1 X51.397 Y-.184 E.00567 G1 X51.409 Y0 E.00567 G1 X51.397 Y.184 E.00567 G1 X51.361 Y.365 E.00567 G1 X51.302 Y.539 E.00565 G1 X51.221 Y.705 E.00568 G1 X51.118 Y.858 E.00567 G1 X50.997 Y.997 E.00566 G1 X50.858 Y1.118 E.00566 G1 X50.705 Y1.221 E.00567 G1 X50.539 Y1.302 E.00568 G1 X50.365 Y1.361 E.00565 G1 X50.184 Y1.397 E.00567 G1 X50 Y1.409 E.00567 G1 X49.816 Y1.397 E.00567 G1 X49.635 Y1.361 E.00567 G1 X49.461 Y1.302 E.00565 G1 X49.295 Y1.221 E.00568 G1 X49.142 Y1.118 E.00567 G1 X49.003 Y.997 E.00566 G1 X48.882 Y.858 E.00566 G1 X48.779 Y.705 E.00567 G1 X48.698 Y.539 E.00568 G1 X48.639 Y.365 E.00565 G1 X48.603 Y.184 E.00567 G1 X48.591 Y0 E.00567 G1 X48.603 Y-.184 E.00567 G1 X48.639 Y-.365 E.00567 G1 X48.698 Y-.539 E.00565 G1 X48.779 Y-.705 E.00568 G1 X48.882 Y-.858 E.00567 G1 X49.003 Y-.997 E.00566 G1 X49.142 Y-1.118 E.00566 G1 X49.295 Y-1.221 E.00567 G1 X49.461 Y-1.302 E.00568 G1 X49.465 Y-1.304 E.00014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3540 G1 X49.636 Y-1.359 G1 X49.857 Y-1.4 G1 X50.184 Y-1.397 G1 X50.365 Y-1.361 G1 X50.539 Y-1.302 G1 X50.705 Y-1.221 G1 X50.858 Y-1.118 G1 X51.024 Y-.966 G1 X51.208 Y-.722 ;WIPE_END G1 X50.42 Y-2.111 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 M106 S255 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.482 Y-2.542 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00073 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.442 Y-2.545 E.01364 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.093 Y-1.511 ;WIPE_END G1 X44.5 Y-.734 Z1.4 F30000 G1 X28.166 Y.937 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.12 Y1.026 E.00309 G3 X25.566 Y-2.091 I-1.929 J-1.025 E.26396 G3 X26.132 Y-2.182 I.653 J2.262 E.01766 G3 X28.282 Y.632 I.06 J2.183 E.1269 G1 X28.18 Y.899 E.0088 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.12 Y1.026 G1 X28.017 Y1.214 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.692 Y2.123 ;WIPE_END G1 X19.237 Y.484 Z1.4 F30000 G1 X7.71 Y-2.052 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.147 J2.165 E.33451 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.267 J2.029 E.2488 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.559 Y4.264 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.559 Y4.259 E.00014 G3 X9.084 Y3.912 I1.132 J1.143 E.01945 G3 X9.631 Y3.794 I.634 J1.612 E.01729 G3 X8.378 Y4.472 I.06 J1.608 E.26523 G1 X8.533 Y4.294 E.00727 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.559 Y4.259 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.631 Y3.794 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.316 Y3.912 G1 X10.372 Y3.939 ;WIPE_END G1 X3.164 Y6.45 Z1.4 F30000 G1 X-16.248 Y13.21 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.151 J-2.165 E.33495 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.271 J-2.027 E.24844 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.461 Y8.975 Z1.4 F30000 G1 X-29.159 Y6.536 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.167 Y6.533 E.00027 G3 X-30.916 Y3.912 I-1.142 J-1.132 E.17508 G3 X-30.369 Y3.794 I.634 J1.612 E.01729 G3 X-29.029 Y6.375 I.06 J1.607 E.1116 G1 X-29.134 Y6.505 E.00511 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.167 Y6.533 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.971 Y6.861 ;WIPE_END G1 X-33.022 Y-.49 Z1.4 F30000 G1 X-38.973 Y-21.812 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.94 Y-21.995 E.00618 G3 X-38.23 Y-23.218 I2.632 J.71 E.04744 G3 X-36.467 Y-24.006 I1.912 J1.909 E.0655 G3 X-39.01 Y-21.645 I.16 J2.722 E.44343 G1 X-38.981 Y-21.773 E.00436 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.573 Y-21.733 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.579 Y-21.753 E.00069 G3 X-37.713 Y-23.13 I2.271 J.467 E.05513 G3 X-36.441 Y-23.6 I1.424 J1.894 E.04565 G3 X-38.606 Y-21.592 I.133 J2.315 E.37704 G1 X-38.582 Y-21.694 E.00348 G1 X-38.145 Y-21.65 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.152 Y-21.668 E.0006 G3 X-37.243 Y-22.921 I1.844 J.382 E.04904 G3 X-36.412 Y-23.166 I.92 J1.587 E.02687 G3 X-38.192 Y-21.288 I.104 J1.88 E.27594 G1 X-38.15 Y-21.61 E.00997 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.152 Y-21.668 G1 X-38.042 Y-22.01 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-36.924 Y-23.063 ;WIPE_END G1 X-35.382 Y-30.538 Z1.4 F30000 G1 X-33.802 Y-38.195 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.943 Y-37.927 E.01005 G3 X-38.23 Y-41.218 I-2.364 J-1.357 E.30825 G3 X-36.467 Y-42.006 I1.912 J1.909 E.0655 G3 X-33.787 Y-38.247 I.16 J2.722 E.18267 G1 X-33.791 Y-38.234 E.00046 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.167 Y-38.376 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.297 Y-38.132 E.00916 G3 X-37.713 Y-41.13 I-2.011 J-1.154 E.27232 G3 X-36.441 Y-41.6 I1.424 J1.894 E.04565 G3 X-34.159 Y-38.414 I.133 J2.315 E.15484 G1 X-34.567 Y-38.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-37.243 Y-40.921 I-1.741 J-.716 E.22 G3 X-36.412 Y-41.166 I.92 J1.587 E.02687 G3 X-34.553 Y-38.608 I.104 J1.88 E.11539 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.667 Y-38.345 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.042 Y-37.421 ;WIPE_END G1 X-28.573 Y-38.992 Z1.4 F30000 G1 X-20.277 Y-40.737 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.249 Y-40.783 E.00181 G3 X-19.794 Y-41.235 I1.941 J1.498 E.02132 G3 X-18.424 Y-41.734 I1.506 J2.005 E.04909 G3 X-20.428 Y-40.517 I.116 J2.449 E.42987 G1 X-20.3 Y-40.704 E.00752 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.909 Y-40.537 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.748 Y-40.737 E.0085 G3 X-19.323 Y-41.06 I1.44 J1.451 E.01778 G3 X-18.397 Y-41.328 I1.002 J1.728 E.0323 G3 X-19.984 Y-40.457 I.089 J2.042 E.36386 G1 X-19.936 Y-40.508 E.00229 G1 X-19.581 Y-40.271 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-18.916 Y-40.776 I1.272 J.985 E.02594 G3 X-18.369 Y-40.894 I.634 J1.612 E.01729 G3 X-19.605 Y-40.239 I.06 J1.608 E.26612 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.369 Y-40.894 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.821 Y-40.823 ;WIPE_END G1 X-17.067 Y-33.228 Z1.4 F30000 G1 X-15.949 Y-21.982 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.94 Y-21.92 E.00205 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35158 G3 X-18.424 Y-23.734 I1.506 J2.005 E.04909 G3 X-16.043 Y-22.223 I.116 J2.449 E.09967 G1 X-15.964 Y-22.019 E.00727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.335 Y-21.851 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.334 Y-21.815 E.00119 G3 X-19.323 Y-23.06 I-1.975 J.529 E.30207 G3 X-18.397 Y-23.328 I1.002 J1.728 E.0323 G3 X-16.419 Y-22.067 I.089 J2.042 E.08287 G1 X-16.349 Y-21.888 E.00638 G1 X-16.746 Y-21.711 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.755 Y-21.702 E.00038 G3 X-18.916 Y-22.776 I-1.553 J.415 E.22657 G3 X-18.369 Y-22.894 I.634 J1.612 E.01729 G3 X-16.822 Y-21.9 I.06 J1.607 E.06012 G1 X-16.761 Y-21.748 E.00504 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.755 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.32 Y-20.01 G1 X-17.368 Y-19.978 ;WIPE_END G1 X-20.758 Y-13.14 Z1.4 F30000 G1 X-42.748 Y31.21 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z1.4 F30000 G1 X-42.748 Y51.21 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z1.4 F30000 G1 X4.752 Y47.21 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z1.4 F30000 G1 X4.752 Y33.21 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z1.4 F30000 G1 X27.252 Y31.21 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z1.4 F30000 G1 X-28.09 Y-52.948 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.944 E.31993 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.945 E.32009 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z1.4 F30000 G1 X7.055 Y-53.79 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z1.4 F30000 G1 X-40.155 Y-5.355 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.444 J1.451 E.19522 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.444 J1.451 E.19522 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.302 Y-2.78 Z1.4 F30000 G1 X-48.767 Y-.934 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.732 Y-1.033 E.00322 G3 X-47.434 Y-2.091 I1.924 J1.034 E.05281 G3 X-46.868 Y-2.182 I.653 J2.262 E.01766 G3 X-48.897 Y-.636 I.06 J2.183 E.33795 G1 X-48.783 Y-.897 E.00876 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.732 Y-1.033 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.297 Y-2.125 ;WIPE_END G1 X-47.161 Y5.506 Z1.4 F30000 G1 X-46.193 Y59.808 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.2 Y59.808 E.00022 G3 X-45.416 Y57.512 I1.391 J-.807 E.08446 G3 X-44.869 Y57.394 I.634 J1.612 E.01729 G3 X-46.082 Y59.984 I.06 J1.607 E.20227 G1 X-46.172 Y59.842 E.00516 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.2 Y59.808 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.038 Y57.975 ;WIPE_END G1 X-38.409 Y58.178 Z1.4 F30000 G1 X22.807 Y59.808 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.801 Y59.808 E.0002 G3 X23.584 Y57.512 I1.391 J-.807 E.08444 G3 X24.131 Y57.394 I.634 J1.612 E.01729 G3 X22.918 Y59.983 I.06 J1.607 E.20218 G1 X22.829 Y59.842 E.00516 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.801 Y59.808 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.884 Y58.077 G1 X22.966 Y57.977 ;WIPE_END G1 X17.578 Y52.571 Z1.4 F30000 G1 X-40.59 Y-5.79 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-39.537 Y-9.07 Z1.4 F30000 G1 Z1 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-39.537 Y-7.441 E.05401 G2 X-38.612 Y-8.358 I-3.511 J-4.466 E.04331 G3 X-37.301 Y-8.728 I1.092 J1.363 E.04639 G1 X-36.974 Y-8.61 E.01155 G3 X-35.991 Y-7.645 I-3.691 J4.74 E.0458 G2 X-34.681 Y-7.275 I1.092 J-1.363 E.04639 G1 X-34.353 Y-7.393 E.01155 G2 X-33.37 Y-8.358 I-3.691 J-4.74 E.0458 G3 X-32.06 Y-8.728 I1.092 J1.363 E.04639 G1 X-31.733 Y-8.61 E.01155 G3 X-30.75 Y-7.645 I-3.692 J4.74 E.0458 G2 X-29.44 Y-7.275 I1.092 J-1.363 E.04639 G1 X-29.112 Y-7.393 E.01155 G2 X-28.129 Y-8.358 I-3.691 J-4.74 E.0458 G3 X-26.819 Y-8.728 I1.092 J1.363 E.04639 G1 X-26.491 Y-8.61 E.01155 G3 X-25.509 Y-7.645 I-3.691 J4.74 E.0458 G2 X-24.198 Y-7.275 I1.092 J-1.363 E.04639 G1 X-23.871 Y-7.393 E.01155 G2 X-22.888 Y-8.358 I-3.691 J-4.74 E.0458 G3 X-21.578 Y-8.728 I1.092 J1.363 E.04639 G1 X-21.25 Y-8.61 E.01155 G3 X-20.267 Y-7.645 I-3.691 J4.74 E.0458 G2 X-18.957 Y-7.275 I1.092 J-1.363 E.04639 G1 X-18.629 Y-7.393 E.01155 G2 X-17.647 Y-8.358 I-3.691 J-4.74 E.0458 G3 X-16.336 Y-8.728 I1.092 J1.363 E.04639 G1 X-16.009 Y-8.61 E.01155 G3 X-15.026 Y-7.645 I-3.691 J4.74 E.0458 G2 X-13.716 Y-7.275 I1.092 J-1.363 E.04639 G1 X-13.388 Y-7.393 E.01155 G2 X-12.405 Y-8.358 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-8.728 I1.092 J1.363 E.04639 G1 X-10.767 Y-8.61 E.01155 G3 X-9.785 Y-7.645 I-3.691 J4.74 E.0458 G2 X-8.474 Y-7.275 I1.092 J-1.363 E.04639 G1 X-8.147 Y-7.393 E.01155 G2 X-7.164 Y-8.358 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-8.728 I1.092 J1.363 E.04639 G1 X-5.526 Y-8.61 E.01155 G3 X-4.543 Y-7.645 I-3.691 J4.74 E.0458 G2 X-3.233 Y-7.275 I1.092 J-1.363 E.04639 G1 X-2.905 Y-7.393 E.01155 G2 X-1.923 Y-8.358 I-3.691 J-4.74 E.0458 G3 X-.612 Y-8.728 I1.092 J1.363 E.04639 G1 X-.285 Y-8.61 E.01155 G3 X.698 Y-7.645 I-3.692 J4.74 E.0458 G2 X2.008 Y-7.275 I1.092 J-1.363 E.04639 G1 X2.336 Y-7.393 E.01155 G2 X3.319 Y-8.358 I-3.691 J-4.74 E.0458 G3 X4.629 Y-8.728 I1.092 J1.363 E.04639 G1 X4.957 Y-8.61 E.01155 G3 X5.939 Y-7.645 I-3.691 J4.74 E.0458 G2 X7.25 Y-7.275 I1.092 J-1.363 E.04639 G1 X7.577 Y-7.393 E.01155 G2 X8.56 Y-8.358 I-3.691 J-4.74 E.0458 G3 X9.87 Y-8.728 I1.092 J1.363 E.04639 G1 X10.198 Y-8.61 E.01155 G3 X11.181 Y-7.645 I-3.691 J4.74 E.0458 G2 X12.491 Y-7.275 I1.092 J-1.363 E.04639 G1 X12.819 Y-7.393 E.01155 G2 X13.801 Y-8.358 I-3.692 J-4.74 E.0458 G3 X15.112 Y-8.728 I1.092 J1.363 E.04639 G1 X15.439 Y-8.61 E.01155 G3 X16.422 Y-7.645 I-3.691 J4.74 E.0458 G2 X17.732 Y-7.275 I1.092 J-1.363 E.04639 G2 X18.937 Y-8.247 I-.918 J-2.37 E.05217 G1 X18.937 Y-6.07 E.07223 G2 X17.732 Y-5.024 I1.536 J2.987 E.05342 G3 X16.422 Y-4.655 I-1.092 J-1.363 E.04639 G1 X16.094 Y-4.772 E.01155 G3 X15.112 Y-5.738 I3.691 J-4.74 E.0458 G2 X13.801 Y-6.108 I-1.092 J1.363 E.04639 G1 X13.474 Y-5.99 E.01155 G2 X12.491 Y-5.024 I3.691 J4.74 E.0458 G3 X11.181 Y-4.655 I-1.092 J-1.363 E.04639 G1 X10.853 Y-4.772 E.01155 G3 X9.87 Y-5.738 I3.691 J-4.74 E.0458 G2 X8.56 Y-6.108 I-1.092 J1.363 E.04639 G1 X8.232 Y-5.99 E.01155 G2 X7.25 Y-5.024 I3.691 J4.74 E.0458 G3 X5.939 Y-4.655 I-1.092 J-1.363 E.04639 G1 X5.612 Y-4.772 E.01155 G3 X4.629 Y-5.738 I3.691 J-4.74 E.0458 G2 X3.319 Y-6.108 I-1.092 J1.363 E.04639 G1 X2.991 Y-5.99 E.01155 G2 X2.008 Y-5.024 I3.691 J4.74 E.0458 G3 X.698 Y-4.655 I-1.092 J-1.363 E.04639 G1 X.37 Y-4.772 E.01155 G3 X-.612 Y-5.738 I3.691 J-4.74 E.0458 G2 X-1.923 Y-6.108 I-1.092 J1.363 E.04639 G1 X-2.25 Y-5.99 E.01155 G2 X-3.233 Y-5.024 I3.691 J4.74 E.0458 G3 X-4.543 Y-4.655 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-4.772 E.01155 G3 X-5.854 Y-5.738 I3.692 J-4.74 E.0458 G2 X-7.164 Y-6.108 I-1.092 J1.363 E.04639 G1 X-7.492 Y-5.99 E.01155 G2 X-8.474 Y-5.024 I3.691 J4.74 E.0458 G3 X-9.785 Y-4.655 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-4.772 E.01155 G3 X-11.095 Y-5.738 I3.691 J-4.74 E.0458 G2 X-12.405 Y-6.108 I-1.092 J1.363 E.04639 G1 X-12.733 Y-5.99 E.01155 G2 X-13.716 Y-5.024 I3.691 J4.74 E.0458 G3 X-15.026 Y-4.655 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-4.772 E.01155 G3 X-16.336 Y-5.738 I3.691 J-4.74 E.0458 G2 X-17.647 Y-6.108 I-1.092 J1.363 E.04639 G1 X-17.974 Y-5.99 E.01155 G2 X-18.957 Y-5.024 I3.692 J4.74 E.0458 G3 X-20.267 Y-4.655 I-1.092 J-1.363 E.04639 G1 X-20.595 Y-4.772 E.01155 G3 X-21.578 Y-5.738 I3.691 J-4.74 E.0458 G2 X-22.888 Y-6.108 I-1.092 J1.363 E.04639 G1 X-23.215 Y-5.99 E.01155 G2 X-24.198 Y-5.024 I3.691 J4.74 E.0458 G3 X-25.509 Y-4.655 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-4.772 E.01155 G3 X-26.819 Y-5.738 I3.691 J-4.74 E.0458 G2 X-28.129 Y-6.108 I-1.092 J1.363 E.04639 G1 X-28.457 Y-5.99 E.01155 G2 X-29.44 Y-5.024 I3.691 J4.74 E.0458 G3 X-30.75 Y-4.655 I-1.092 J-1.363 E.04639 G1 X-31.077 Y-4.772 E.01155 G3 X-32.06 Y-5.738 I3.691 J-4.74 E.0458 G2 X-33.37 Y-6.108 I-1.092 J1.363 E.04639 G1 X-33.698 Y-5.99 E.01155 G2 X-34.681 Y-5.024 I3.691 J4.74 E.0458 G3 X-35.991 Y-4.655 I-1.092 J-1.363 E.04639 G1 X-36.319 Y-4.772 E.01155 G3 X-37.301 Y-5.738 I3.691 J-4.74 E.0458 G2 X-38.612 Y-6.108 I-1.092 J1.363 E.04639 G2 X-39.537 Y-5.431 I.659 J1.871 E.03857 G1 X-39.537 Y-4.737 E.02302 G1 X-40.496 Y-4.737 E.03183 G1 X-41.232 Y-4.655 E.02457 G1 X-41.461 Y-4.737 E.00807 G1 X-45.738 Y-4.737 E.14186 G1 X-46.474 Y-4.655 E.02457 G1 X-46.703 Y-4.737 E.00807 G1 X-48.537 Y-4.737 E.06085 G1 X-48.537 Y-3.396 E.04447 G1 X-47.784 Y-3.487 E.02515 G3 X-47.258 Y-3.203 I-.123 J.857 E.02023 G3 X-45.658 Y-3.028 I.412 J3.631 E.05385 G1 X-49.135 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409519 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385478 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342222 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305487 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275112 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276404 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307218 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344555 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.39396 G2 X-49.135 Y1.264 I8.184 J-1.359 E.0117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.211 Y.863 ;WIPE_END G1 X-44.526 Y2.306 Z1.4 F30000 G1 Z1 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-45.919 Y3.115 I-2.531 J-2.755 E.05386 G1 X-45.163 Y3.207 E.02526 G1 X-44.836 Y3.09 E.01155 G2 X-43.853 Y2.124 I-3.691 J-4.74 E.0458 G3 X-42.543 Y1.754 I1.092 J1.363 E.04639 G1 X-42.215 Y1.872 E.01155 G3 X-41.232 Y2.838 I-3.691 J4.74 E.0458 G2 X-39.922 Y3.207 I1.092 J-1.363 E.04639 G1 X-39.595 Y3.09 E.01155 G2 X-38.612 Y2.124 I-3.691 J-4.74 E.0458 G3 X-37.301 Y1.754 I1.092 J1.363 E.04639 G1 X-36.974 Y1.872 E.01155 G3 X-35.991 Y2.838 I-3.691 J4.74 E.0458 G2 X-34.681 Y3.207 I1.092 J-1.363 E.04639 G1 X-34.353 Y3.09 E.01155 G2 X-33.37 Y2.124 I-3.691 J-4.74 E.0458 G3 X-32.06 Y1.754 I1.092 J1.363 E.04639 G1 X-31.733 Y1.872 E.01155 G3 X-30.798 Y2.787 I-3.495 J4.506 E.04347 G2 X-32.774 Y4.413 I.505 J2.628 E.08852 G2 X-33.698 Y4.493 I-.37 J1.107 E.03163 G2 X-34.681 Y5.458 I3.691 J4.74 E.0458 G3 X-35.991 Y5.828 I-1.092 J-1.363 E.04639 G1 X-36.319 Y5.71 E.01155 G3 X-37.301 Y4.745 I3.691 J-4.74 E.0458 G2 X-38.612 Y4.375 I-1.092 J1.363 E.04639 G1 X-38.939 Y4.493 E.01155 G2 X-39.922 Y5.458 I3.691 J4.74 E.0458 G3 X-41.232 Y5.828 I-1.092 J-1.363 E.04639 G1 X-41.56 Y5.71 E.01155 G3 X-42.543 Y4.745 I3.691 J-4.74 E.0458 G2 X-43.853 Y4.375 I-1.092 J1.363 E.04639 G1 X-44.181 Y4.493 E.01155 G2 X-45.163 Y5.458 I3.691 J4.74 E.0458 G3 X-46.474 Y5.828 I-1.092 J-1.363 E.04639 G1 X-46.801 Y5.71 E.01155 G3 X-47.784 Y4.745 I3.691 J-4.74 E.0458 G1 X-48.537 Y4.411 E.02732 G1 X-48.537 Y7.086 E.08876 G1 X-47.784 Y6.996 E.02515 G1 X-47.457 Y7.113 E.01155 G3 X-46.474 Y8.079 I-3.691 J4.74 E.0458 G2 X-45.163 Y8.449 I1.092 J-1.363 E.04639 G1 X-44.836 Y8.331 E.01155 G2 X-43.853 Y7.365 I-3.691 J-4.74 E.0458 G3 X-42.543 Y6.996 I1.092 J1.363 E.04639 G1 X-42.215 Y7.113 E.01155 G3 X-41.232 Y8.079 I-3.691 J4.74 E.0458 G2 X-39.922 Y8.449 I1.092 J-1.363 E.04639 G1 X-39.595 Y8.331 E.01155 G2 X-38.612 Y7.365 I-3.691 J-4.74 E.0458 G3 X-37.301 Y6.996 I1.092 J1.363 E.04639 G1 X-36.974 Y7.113 E.01155 G3 X-35.991 Y8.079 I-3.691 J4.74 E.0458 G2 X-34.681 Y8.449 I1.092 J-1.363 E.04639 G1 X-34.353 Y8.331 E.01155 G2 X-33.37 Y7.365 I-3.691 J-4.74 E.0458 G1 X-32.715 Y7.037 E.0243 G1 X-32.418 Y7.019 E.00989 G2 X-30.815 Y8.01 I2.136 J-1.662 E.06384 G2 X-29.44 Y8.449 I1.154 J-1.242 E.04949 G1 X-29.363 Y8.421 E.00269 G1 X-29.363 Y10.619 E.07291 G3 X-30.75 Y11.069 I-1.165 J-1.226 E.05 G1 X-31.077 Y10.952 E.01155 G3 X-32.06 Y9.986 I3.691 J-4.74 E.0458 G2 X-33.37 Y9.616 I-1.092 J1.363 E.04639 G1 X-33.698 Y9.734 E.01155 G2 X-34.681 Y10.7 I3.691 J4.74 E.0458 G3 X-35.991 Y11.069 I-1.092 J-1.363 E.04639 G1 X-36.319 Y10.952 E.01155 G3 X-37.301 Y9.986 I3.691 J-4.74 E.0458 G2 X-38.612 Y9.616 I-1.092 J1.363 E.04639 G1 X-38.939 Y9.734 E.01155 G2 X-39.922 Y10.7 I3.691 J4.74 E.0458 G3 X-41.232 Y11.069 I-1.092 J-1.363 E.04639 G1 X-41.56 Y10.952 E.01155 G3 X-42.543 Y9.986 I3.691 J-4.74 E.0458 G2 X-43.853 Y9.616 I-1.092 J1.363 E.04639 G1 X-44.181 Y9.734 E.01155 G2 X-45.163 Y10.7 I3.691 J4.74 E.0458 G3 X-46.474 Y11.069 I-1.092 J-1.363 E.04639 G1 X-46.801 Y10.952 E.01155 G3 X-47.784 Y9.986 I3.691 J-4.74 E.0458 G1 X-48.537 Y9.652 E.02732 G1 X-48.537 Y11.28 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-48.537 Y9.652 G1 X-48.197 Y9.803 ;WIPE_END G1 X-45.386 Y16.898 Z1.4 F30000 G1 X-42.537 Y24.088 Z1.4 G1 Z1 G1 E.8 F1800 G1 F16200 G1 X-42.537 Y25.716 E.05401 G2 X-41.56 Y26.675 I4.644 J-3.752 E.04552 G2 X-39.922 Y26.424 I.582 J-1.67 E.05721 G3 X-38.939 Y25.458 I4.674 J3.775 E.0458 G3 X-37.301 Y25.71 I.582 J1.67 E.05721 G2 X-36.319 Y26.675 I4.674 J-3.775 E.0458 G2 X-34.681 Y26.424 I.582 J-1.67 E.05721 G3 X-33.698 Y25.458 I4.674 J3.775 E.0458 G3 X-32.06 Y25.71 I.582 J1.67 E.05721 G2 X-31.077 Y26.675 I4.674 J-3.775 E.0458 G2 X-29.44 Y26.424 I.582 J-1.67 E.05721 G3 X-28.457 Y25.458 I4.674 J3.775 E.0458 G3 X-26.819 Y25.71 I.582 J1.67 E.05721 G1 X-26.164 Y26.401 E.03159 G2 X-25.563 Y26.774 I.807 J-.631 E.02393 G1 X-25.563 Y28.987 E.07341 G2 X-26.491 Y28.079 I-4.397 J3.567 E.04316 G2 X-28.129 Y28.331 I-.582 J1.67 E.05721 G3 X-29.112 Y29.296 I-4.674 J-3.775 E.0458 G3 X-30.75 Y29.044 I-.582 J-1.67 E.05721 G2 X-31.733 Y28.079 I-4.674 J3.775 E.0458 G2 X-33.37 Y28.331 I-.582 J1.67 E.05721 G3 X-34.353 Y29.296 I-4.674 J-3.775 E.0458 G3 X-35.991 Y29.044 I-.582 J-1.67 E.05721 G2 X-36.974 Y28.079 I-4.674 J3.775 E.0458 G2 X-38.612 Y28.331 I-.582 J1.67 E.05721 G3 X-39.595 Y29.296 I-4.674 J-3.775 E.0458 G3 X-41.232 Y29.044 I-.582 J-1.67 E.05721 G1 X-41.888 Y28.353 E.03159 G2 X-42.537 Y27.963 I-.855 J.688 E.02565 G1 X-42.537 Y30.958 E.09933 G2 X-41.56 Y31.917 I4.644 J-3.752 E.04552 G2 X-39.922 Y31.665 I.582 J-1.67 E.05721 G3 X-38.939 Y30.699 I4.674 J3.775 E.0458 G3 X-37.301 Y30.951 I.582 J1.67 E.05721 G2 X-36.319 Y31.917 I4.674 J-3.775 E.0458 G2 X-34.681 Y31.665 I.582 J-1.67 E.05721 G3 X-33.698 Y30.699 I4.674 J3.775 E.0458 G3 X-32.06 Y30.951 I.582 J1.67 E.05721 G2 X-31.077 Y31.917 I4.674 J-3.775 E.0458 G2 X-29.44 Y31.665 I.582 J-1.67 E.05721 G3 X-28.457 Y30.699 I4.674 J3.775 E.0458 G3 X-26.819 Y30.951 I.582 J1.67 E.05721 G1 X-26.164 Y31.642 E.03159 G2 X-25.563 Y32.015 I.807 J-.631 E.02393 G1 X-25.563 Y30.387 E.05401 G1 X-25.563 Y37.841 F30000 G1 F16200 G1 X-25.563 Y39.469 E.05401 G2 X-26.491 Y38.561 I-4.398 J3.567 E.04316 G2 X-28.129 Y38.813 I-.582 J1.67 E.05721 G3 X-29.112 Y39.779 I-4.674 J-3.775 E.0458 G3 X-30.75 Y39.527 I-.582 J-1.67 E.05721 G2 X-31.733 Y38.561 I-4.674 J3.775 E.0458 G2 X-33.37 Y38.813 I-.582 J1.67 E.05721 G3 X-34.353 Y39.779 I-4.674 J-3.775 E.0458 G3 X-35.991 Y39.527 I-.582 J-1.67 E.05721 G2 X-36.974 Y38.561 I-4.674 J3.775 E.0458 G2 X-38.612 Y38.813 I-.582 J1.67 E.05721 G3 X-39.595 Y39.779 I-4.674 J-3.775 E.0458 G3 X-41.232 Y39.527 I-.582 J-1.67 E.05721 G1 X-41.888 Y38.836 E.03159 G2 X-42.537 Y38.446 I-.855 J.688 E.02565 G1 X-42.537 Y41.44 E.09933 G2 X-41.56 Y42.399 I4.644 J-3.752 E.04552 G2 X-39.922 Y42.147 I.582 J-1.67 E.05721 M73 P21 R64 G3 X-38.939 Y41.182 I4.674 J3.775 E.0458 G3 X-37.301 Y41.434 I.582 J1.67 E.05721 G2 X-36.319 Y42.399 I4.674 J-3.775 E.0458 G2 X-34.681 Y42.147 I.582 J-1.67 E.05721 G3 X-33.698 Y41.182 I4.674 J3.775 E.0458 G3 X-32.06 Y41.434 I.582 J1.67 E.05721 G2 X-31.077 Y42.399 I4.674 J-3.775 E.0458 G2 X-29.44 Y42.147 I.582 J-1.67 E.05721 G3 X-28.457 Y41.182 I4.674 J3.775 E.0458 G3 X-26.819 Y41.434 I.582 J1.67 E.05721 G1 X-26.164 Y42.125 E.03159 G2 X-25.563 Y42.497 I.807 J-.631 E.02393 G1 X-25.563 Y44.711 E.07341 G2 X-26.491 Y43.803 I-4.398 J3.567 E.04316 G2 X-28.129 Y44.055 I-.582 J1.67 E.05721 G3 X-29.112 Y45.02 I-4.674 J-3.775 E.0458 G3 X-30.75 Y44.768 I-.582 J-1.67 E.05721 G2 X-31.733 Y43.803 I-4.674 J3.775 E.0458 G2 X-33.37 Y44.055 I-.582 J1.67 E.05721 G3 X-34.353 Y45.02 I-4.674 J-3.775 E.0458 G3 X-35.991 Y44.768 I-.582 J-1.67 E.05721 G2 X-36.974 Y43.803 I-4.674 J3.775 E.0458 G2 X-38.612 Y44.055 I-.582 J1.67 E.05721 G3 X-39.595 Y45.02 I-4.674 J-3.775 E.0458 G3 X-41.232 Y44.768 I-.582 J-1.67 E.05721 G1 X-41.888 Y44.077 E.03159 G2 X-42.537 Y43.687 I-.855 J.688 E.02565 G1 X-42.537 Y45.315 E.05401 G1 X-40.157 Y59.737 F30000 G1 F16200 G1 X-38.529 Y59.737 E.05401 G3 X-37.301 Y59.409 I1.001 J1.285 E.04329 G3 X-36.723 Y59.737 I-.157 J.951 E.02253 G1 X-33.287 Y59.737 E.11396 G3 X-32.06 Y59.409 I1.001 J1.285 E.04329 G3 X-31.481 Y59.737 I-.157 J.951 E.02253 G1 X-28.046 Y59.737 E.11396 G3 X-26.819 Y59.409 I1.001 J1.285 E.04329 G3 X-26.24 Y59.737 I-.157 J.951 E.02253 G1 X-22.805 Y59.737 E.11396 G3 X-21.578 Y59.409 I1.001 J1.285 E.04329 G3 X-20.999 Y59.737 I-.157 J.951 E.02253 G1 X-17.563 Y59.737 E.11396 G3 X-16.336 Y59.409 I1.001 J1.285 E.04329 G3 X-15.757 Y59.737 I-.157 J.951 E.02253 G1 X-12.322 Y59.737 E.11396 G3 X-11.095 Y59.409 I1.001 J1.285 E.04329 G3 X-10.516 Y59.737 I-.157 J.951 E.02253 M73 P21 R63 G1 X-7.081 Y59.737 E.11396 G3 X-5.854 Y59.409 I1.001 J1.285 E.04329 G3 X-5.275 Y59.737 I-.157 J.951 E.02253 G1 X-1.84 Y59.737 E.11396 G3 X-.612 Y59.409 I1.001 J1.285 E.04329 G3 X-.034 Y59.737 I-.157 J.951 E.02253 G1 X3.402 Y59.737 E.11396 G3 X4.629 Y59.409 I1.001 J1.285 E.04329 G3 X5.208 Y59.737 I-.157 J.951 E.02253 G1 X8.643 Y59.737 E.11396 G3 X9.87 Y59.409 I1.001 J1.285 E.04329 G3 X10.449 Y59.737 I-.157 J.951 E.02253 G1 X13.884 Y59.737 E.11396 G3 X15.112 Y59.409 I1.001 J1.285 E.04329 G3 X15.69 Y59.737 I-.157 J.951 E.02253 G1 X19.126 Y59.737 E.11396 G3 X20.353 Y59.409 I1.001 J1.285 E.04329 G3 X20.932 Y59.737 I-.157 J.951 E.02253 G1 X21.641 Y59.737 E.02353 G3 X21.65 Y58.236 I3.142 J-.731 E.05024 G1 X21.336 Y58.123 E.01108 G3 X20.353 Y57.158 I3.691 J-4.74 E.0458 G2 X19.043 Y56.788 I-1.092 J1.363 E.04639 G1 X18.715 Y56.906 E.01155 G2 X17.732 Y57.871 I3.691 J4.74 E.0458 G3 X16.422 Y58.241 I-1.092 J-1.363 E.04639 G1 X16.094 Y58.123 E.01155 G3 X15.112 Y57.158 I3.691 J-4.74 E.0458 G2 X13.801 Y56.788 I-1.092 J1.363 E.04639 G1 X13.474 Y56.906 E.01155 G2 X12.491 Y57.871 I3.691 J4.74 E.0458 G3 X11.181 Y58.241 I-1.092 J-1.363 E.04639 G1 X10.853 Y58.123 E.01155 G3 X9.87 Y57.158 I3.691 J-4.74 E.0458 G2 X8.56 Y56.788 I-1.092 J1.363 E.04639 G1 X8.232 Y56.906 E.01155 G2 X7.25 Y57.871 I3.691 J4.74 E.0458 G3 X5.939 Y58.241 I-1.092 J-1.363 E.04639 G1 X5.612 Y58.123 E.01155 G3 X4.629 Y57.158 I3.691 J-4.74 E.0458 G2 X3.319 Y56.788 I-1.092 J1.363 E.04639 G1 X2.991 Y56.906 E.01155 G2 X2.008 Y57.871 I3.691 J4.74 E.0458 G3 X.698 Y58.241 I-1.092 J-1.363 E.04639 G1 X.37 Y58.123 E.01155 G3 X-.612 Y57.158 I3.691 J-4.74 E.0458 G2 X-1.923 Y56.788 I-1.092 J1.363 E.04639 G1 X-2.25 Y56.906 E.01155 G2 X-3.233 Y57.871 I3.691 J4.74 E.0458 G3 X-4.543 Y58.241 I-1.092 J-1.363 E.04639 G1 X-4.871 Y58.123 E.01155 G3 X-5.854 Y57.158 I3.692 J-4.74 E.0458 G2 X-7.164 Y56.788 I-1.092 J1.363 E.04639 G1 X-7.492 Y56.906 E.01155 G2 X-8.474 Y57.871 I3.691 J4.74 E.0458 G3 X-9.785 Y58.241 I-1.092 J-1.363 E.04639 G1 X-10.112 Y58.123 E.01155 G3 X-11.095 Y57.158 I3.691 J-4.74 E.0458 G2 X-12.405 Y56.788 I-1.092 J1.363 E.04639 G1 X-12.733 Y56.906 E.01155 G2 X-13.716 Y57.871 I3.691 J4.74 E.0458 G3 X-15.026 Y58.241 I-1.092 J-1.363 E.04639 G1 X-15.354 Y58.123 E.01155 G3 X-16.336 Y57.158 I3.691 J-4.74 E.0458 G2 X-17.647 Y56.788 I-1.092 J1.363 E.04639 G1 X-17.974 Y56.906 E.01155 G2 X-18.957 Y57.871 I3.692 J4.74 E.0458 G3 X-20.267 Y58.241 I-1.092 J-1.363 E.04639 G1 X-20.595 Y58.123 E.01155 G3 X-21.578 Y57.158 I3.691 J-4.74 E.0458 G2 X-22.888 Y56.788 I-1.092 J1.363 E.04639 G1 X-23.215 Y56.906 E.01155 G2 X-24.198 Y57.871 I3.691 J4.74 E.0458 G3 X-25.509 Y58.241 I-1.092 J-1.363 E.04639 G1 X-25.836 Y58.123 E.01155 G3 X-26.819 Y57.158 I3.691 J-4.74 E.0458 G2 X-28.129 Y56.788 I-1.092 J1.363 E.04639 G1 X-28.457 Y56.906 E.01155 G2 X-29.44 Y57.871 I3.691 J4.74 E.0458 G3 X-30.75 Y58.241 I-1.092 J-1.363 E.04639 G1 X-31.077 Y58.123 E.01155 G3 X-32.06 Y57.158 I3.691 J-4.74 E.0458 G2 X-33.37 Y56.788 I-1.092 J1.363 E.04639 G1 X-33.698 Y56.906 E.01155 G2 X-34.681 Y57.871 I3.691 J4.74 E.0458 G3 X-35.991 Y58.241 I-1.092 J-1.363 E.04639 G1 X-36.319 Y58.123 E.01155 G3 X-37.301 Y57.158 I3.691 J-4.74 E.0458 G2 X-38.612 Y56.788 I-1.092 J1.363 E.04639 G1 X-38.939 Y56.906 E.01155 G2 X-39.922 Y57.871 I3.691 J4.74 E.0458 G3 X-41.232 Y58.241 I-1.092 J-1.363 E.04639 G1 X-41.56 Y58.123 E.01155 G3 X-42.543 Y57.158 I3.691 J-4.74 E.0458 G1 X-43.198 Y56.83 E.0243 G2 X-44.792 Y56.335 I-1.947 J3.454 E.05579 G1 X-48.537 Y57.871 F30000 G1 F16200 G1 X-48.537 Y59.499 E.05401 G1 X-47.784 Y59.409 E.02515 G3 X-47.398 Y59.576 I-.034 J.609 E.01425 G3 X-47.175 Y57.801 I2.932 J-.533 E.06027 G1 X-47.784 Y57.158 E.02939 G1 X-48.537 Y56.824 E.02732 G1 X-48.537 Y54.258 E.0851 G1 X-47.784 Y54.168 E.02515 G3 X-47.129 Y54.56 I-.206 J1.087 E.02586 G1 X-46.474 Y55.251 E.03159 G2 X-44.836 Y55.503 I1.056 J-1.418 E.05721 G2 X-43.853 Y54.537 I-3.691 J-4.74 E.0458 G3 X-42.215 Y54.285 I1.056 J1.418 E.05721 G3 X-41.232 Y55.251 I-3.691 J4.74 E.0458 G2 X-39.595 Y55.503 I1.056 J-1.418 E.05721 G2 X-38.612 Y54.537 I-3.691 J-4.74 E.0458 G3 X-36.974 Y54.285 I1.056 J1.418 E.05721 G3 X-35.991 Y55.251 I-3.691 J4.74 E.0458 G2 X-34.353 Y55.503 I1.056 J-1.418 E.05721 G2 X-33.37 Y54.537 I-3.691 J-4.74 E.0458 G3 X-31.733 Y54.285 I1.056 J1.418 E.05721 G3 X-30.75 Y55.251 I-3.692 J4.74 E.0458 G2 X-29.112 Y55.503 I1.056 J-1.418 E.05721 G2 X-28.129 Y54.537 I-3.691 J-4.74 E.0458 G3 X-26.491 Y54.285 I1.056 J1.418 E.05721 G3 X-25.509 Y55.251 I-3.691 J4.74 E.0458 G2 X-23.871 Y55.503 I1.056 J-1.418 E.05721 G2 X-22.888 Y54.537 I-3.691 J-4.74 E.0458 G3 X-21.25 Y54.285 I1.056 J1.418 E.05721 G3 X-20.267 Y55.251 I-3.691 J4.74 E.0458 G2 X-18.629 Y55.503 I1.056 J-1.418 E.05721 G2 X-17.647 Y54.537 I-3.691 J-4.74 E.0458 G3 X-16.009 Y54.285 I1.056 J1.418 E.05721 G3 X-15.026 Y55.251 I-3.691 J4.74 E.0458 G2 X-13.388 Y55.503 I1.056 J-1.418 E.05721 G2 X-12.405 Y54.537 I-3.691 J-4.74 E.0458 G3 X-10.767 Y54.285 I1.056 J1.418 E.05721 G3 X-9.785 Y55.251 I-3.691 J4.74 E.0458 G2 X-8.147 Y55.503 I1.056 J-1.418 E.05721 G2 X-7.164 Y54.537 I-3.691 J-4.74 E.0458 G3 X-5.526 Y54.285 I1.056 J1.418 E.05721 G3 X-4.543 Y55.251 I-3.691 J4.74 E.0458 G2 X-2.905 Y55.503 I1.056 J-1.418 E.05721 G2 X-1.923 Y54.537 I-3.691 J-4.74 E.0458 G3 X-.285 Y54.285 I1.056 J1.418 E.05721 G3 X.698 Y55.251 I-3.692 J4.74 E.0458 G2 X2.336 Y55.503 I1.056 J-1.418 E.05721 G2 X3.319 Y54.537 I-3.691 J-4.74 E.0458 G3 X4.957 Y54.285 I1.056 J1.418 E.05721 G3 X5.939 Y55.251 I-3.691 J4.74 E.0458 G2 X7.577 Y55.503 I1.056 J-1.418 E.05721 G2 X8.56 Y54.537 I-3.691 J-4.74 E.0458 G3 X10.198 Y54.285 I1.056 J1.418 E.05721 G3 X11.181 Y55.251 I-3.691 J4.74 E.0458 G2 X12.819 Y55.503 I1.056 J-1.418 E.05721 G2 X13.801 Y54.537 I-3.692 J-4.74 E.0458 G3 X15.439 Y54.285 I1.056 J1.418 E.05721 G3 X16.422 Y55.251 I-3.691 J4.74 E.0458 G2 X18.06 Y55.503 I1.056 J-1.418 E.05721 G2 X19.043 Y54.537 I-3.691 J-4.74 E.0458 G3 X20.68 Y54.285 I1.056 J1.418 E.05721 G3 X21.663 Y55.251 I-3.691 J4.74 E.0458 G2 X23.301 Y55.503 I1.056 J-1.418 E.05721 G2 X24.284 Y54.537 I-3.691 J-4.74 E.0458 G3 X25.922 Y54.285 I1.056 J1.418 E.05721 G3 X26.905 Y55.251 I-3.691 J4.74 E.0458 G1 X27.56 Y55.579 E.0243 G1 X27.937 Y55.603 E.01254 G1 X27.937 Y58.01 E.07987 G1 X27.56 Y58.199 E.01399 G1 X26.905 Y58.241 E.02178 G3 X26.663 Y57.98 I-.017 J-.227 E.01355 G2 X25.803 Y56.872 I-2.582 J1.116 E.04702 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X26.315 Y57.377 G1 X26.663 Y57.98 G1 X26.73 Y58.178 G1 X26.905 Y58.241 G1 X27.094 Y58.229 ;WIPE_END G1 X24.015 Y51.245 Z1.4 F30000 G1 X21.937 Y46.533 Z1.4 G1 Z1 G1 E.8 F1800 G1 F16200 G1 X21.937 Y44.905 E.05401 G1 X21.663 Y44.768 E.01015 G2 X20.68 Y43.803 I-4.674 J3.775 E.0458 G2 X19.043 Y44.055 I-.582 J1.67 E.05721 G3 X18.06 Y45.02 I-4.674 J-3.775 E.0458 G3 X16.422 Y44.768 I-.582 J-1.67 E.05721 G2 X15.439 Y43.803 I-4.674 J3.775 E.0458 G2 X13.801 Y44.055 I-.582 J1.67 E.05721 G3 X12.819 Y45.02 I-4.674 J-3.775 E.0458 G3 X11.181 Y44.768 I-.582 J-1.67 E.05721 G2 X10.198 Y43.803 I-4.674 J3.775 E.0458 G2 X8.56 Y44.055 I-.582 J1.67 E.05721 G3 X7.577 Y45.02 I-4.674 J-3.775 E.0458 G3 X5.939 Y44.768 I-.582 J-1.67 E.05721 G2 X4.963 Y43.808 I-4.647 J3.749 E.04552 G1 X4.963 Y41.786 E.06706 G2 X5.612 Y42.399 I2.98 J-2.503 E.02967 G2 X7.25 Y42.147 I.582 J-1.67 E.05721 G3 X8.232 Y41.182 I4.674 J3.775 E.0458 G3 X9.87 Y41.434 I.582 J1.67 E.05721 G2 X10.853 Y42.399 I4.674 J-3.775 E.0458 G2 X12.491 Y42.147 I.582 J-1.67 E.05721 G3 X13.474 Y41.182 I4.674 J3.775 E.0458 G3 X15.112 Y41.434 I.582 J1.67 E.05721 G2 X16.094 Y42.399 I4.674 J-3.775 E.0458 G2 X17.732 Y42.147 I.582 J-1.67 E.05721 G3 X18.715 Y41.182 I4.674 J3.775 E.0458 G3 X20.353 Y41.434 I.582 J1.67 E.05721 G1 X21.008 Y42.125 E.03159 G2 X21.937 Y42.5 I.806 J-.66 E.03466 G1 X21.937 Y39.664 E.09407 G1 X21.663 Y39.527 E.01015 G2 X20.68 Y38.561 I-4.674 J3.775 E.0458 G2 X19.043 Y38.813 I-.582 J1.67 E.05721 G3 X18.06 Y39.779 I-4.674 J-3.775 E.0458 G3 X16.422 Y39.527 I-.582 J-1.67 E.05721 G2 X15.439 Y38.561 I-4.674 J3.775 E.0458 G2 X13.801 Y38.813 I-.582 J1.67 E.05721 G3 X12.819 Y39.779 I-4.674 J-3.775 E.0458 G3 X11.181 Y39.527 I-.582 J-1.67 E.05721 G2 X10.198 Y38.561 I-4.674 J3.775 E.0458 G2 X8.56 Y38.813 I-.582 J1.67 E.05721 G3 X7.577 Y39.779 I-4.674 J-3.775 E.0458 G3 X5.939 Y39.527 I-.582 J-1.67 E.05721 G2 X4.963 Y38.567 I-4.647 J3.749 E.04552 G1 X4.963 Y37.737 E.02753 G1 X4.165 Y37.737 E.02648 G1 X4.292 Y34.263 F30000 G1 F16200 G1 X2.663 Y34.263 E.05401 G3 X1.353 Y34.613 I-.925 J-.836 E.04757 G1 X.677 Y34.263 E.02527 G1 X-2.578 Y34.263 E.10796 G3 X-3.888 Y34.613 I-.925 J-.836 E.04757 G1 X-4.565 Y34.263 E.02527 G1 X-7.819 Y34.263 E.10796 G3 X-9.129 Y34.613 I-.925 J-.836 E.04757 G1 X-9.806 Y34.263 E.02527 G1 X-13.06 Y34.263 E.10796 G3 X-14.371 Y34.613 I-.925 J-.836 E.04757 G1 X-15.047 Y34.263 E.02527 G1 X-18.302 Y34.263 E.10796 G3 X-19.612 Y34.613 I-.925 J-.836 E.04757 G1 X-20.288 Y34.263 E.02527 G1 X-23.543 Y34.263 E.10796 G3 X-24.853 Y34.613 I-.925 J-.836 E.04757 G1 X-25.509 Y34.285 E.0243 G2 X-25.563 Y34.263 I-.038 J.015 E.00219 G1 X-25.563 Y34.228 E.00117 G2 X-26.491 Y33.32 I-4.398 J3.567 E.04316 G1 X-26.819 Y33.202 E.01155 G2 X-28.129 Y33.572 I-.219 J1.732 E.04639 G3 X-29.112 Y34.537 I-4.674 J-3.775 E.0458 G1 X-29.44 Y34.655 E.01155 G3 X-30.75 Y34.285 I-.219 J-1.732 E.04639 G2 X-31.733 Y33.32 I-4.674 J3.775 E.0458 G1 X-32.06 Y33.202 E.01155 G2 X-33.37 Y33.572 I-.219 J1.732 E.04639 G3 X-34.353 Y34.537 I-4.674 J-3.775 E.0458 G1 X-34.681 Y34.655 E.01155 G3 X-35.991 Y34.285 I-.219 J-1.732 E.04639 G2 X-36.974 Y33.32 I-4.674 J3.775 E.0458 G1 X-37.301 Y33.202 E.01155 G2 X-38.612 Y33.572 I-.219 J1.732 E.04639 G3 X-39.595 Y34.537 I-4.674 J-3.775 E.0458 G1 X-39.922 Y34.655 E.01155 G3 X-41.232 Y34.285 I-.219 J-1.732 E.04639 G2 X-42.215 Y33.32 I-4.674 J3.775 E.0458 G1 X-42.543 Y33.202 E.01155 G2 X-43.853 Y33.572 I-.219 J1.732 E.04639 G3 X-44.836 Y34.537 I-4.674 J-3.775 E.0458 G1 X-45.163 Y34.655 E.01155 G3 X-46.474 Y34.285 I-.219 J-1.732 E.04639 G2 X-47.457 Y33.32 I-4.674 J3.775 E.0458 G1 X-47.784 Y33.202 E.01155 G1 X-48.537 Y33.293 E.02515 G1 X-48.537 Y35.858 E.0851 G1 X-47.784 Y36.193 E.02732 G2 X-46.801 Y37.158 I4.674 J-3.775 E.0458 G1 X-46.474 Y37.276 E.01155 G2 X-45.163 Y36.906 I.219 J-1.732 E.04639 G3 X-44.181 Y35.941 I4.674 J3.775 E.0458 G1 X-43.853 Y35.823 E.01155 G3 X-42.543 Y36.193 I.219 J1.732 E.04639 G2 X-41.56 Y37.158 I4.674 J-3.775 E.0458 G1 X-41.232 Y37.276 E.01155 G2 X-39.922 Y36.906 I.219 J-1.732 E.04639 G3 X-38.939 Y35.941 I4.674 J3.775 E.0458 G1 X-38.612 Y35.823 E.01155 G3 X-37.301 Y36.193 I.219 J1.732 E.04639 G2 X-36.319 Y37.158 I4.674 J-3.775 E.0458 G1 X-35.991 Y37.276 E.01155 G2 X-34.681 Y36.906 I.219 J-1.732 E.04639 G3 X-33.698 Y35.941 I4.674 J3.775 E.0458 G1 X-33.37 Y35.823 E.01155 G3 X-32.06 Y36.193 I.219 J1.732 E.04639 G2 X-31.077 Y37.158 I4.674 J-3.775 E.0458 G1 X-30.75 Y37.276 E.01155 G2 X-29.44 Y36.906 I.219 J-1.732 E.04639 G3 X-28.457 Y35.941 I4.674 J3.775 E.0458 G1 X-28.129 Y35.823 E.01155 G3 X-26.819 Y36.193 I.219 J1.732 E.04639 G2 X-25.836 Y37.158 I4.674 J-3.775 E.0458 G1 X-25.509 Y37.276 E.01155 G2 X-24.198 Y36.906 I.219 J-1.732 E.04639 G3 X-23.215 Y35.941 I4.674 J3.775 E.0458 G1 X-22.888 Y35.823 E.01155 G3 X-21.578 Y36.193 I.219 J1.732 E.04639 G2 X-20.595 Y37.158 I4.674 J-3.775 E.0458 G1 X-20.267 Y37.276 E.01155 G2 X-18.957 Y36.906 I.219 J-1.732 E.04639 G3 X-17.974 Y35.941 I4.674 J3.775 E.0458 G1 X-17.647 Y35.823 E.01155 G3 X-16.336 Y36.193 I.219 J1.732 E.04639 G2 X-15.354 Y37.158 I4.674 J-3.775 E.0458 G1 X-15.026 Y37.276 E.01155 G2 X-13.716 Y36.906 I.219 J-1.732 E.04639 G3 X-12.733 Y35.941 I4.674 J3.775 E.0458 G1 X-12.405 Y35.823 E.01155 G3 X-11.095 Y36.193 I.219 J1.732 E.04639 G2 X-10.112 Y37.158 I4.674 J-3.775 E.0458 G1 X-9.785 Y37.276 E.01155 G2 X-8.474 Y36.906 I.219 J-1.732 E.04639 G3 X-7.492 Y35.941 I4.674 J3.775 E.0458 G1 X-7.164 Y35.823 E.01155 G3 X-5.854 Y36.193 I.219 J1.732 E.04639 G2 X-4.871 Y37.158 I4.674 J-3.775 E.0458 G1 X-4.543 Y37.276 E.01155 G2 X-3.233 Y36.906 I.219 J-1.732 E.04639 G3 X-2.25 Y35.941 I4.674 J3.775 E.0458 G1 X-1.923 Y35.823 E.01155 G3 X-.612 Y36.193 I.219 J1.732 E.04639 G2 X.37 Y37.158 I4.674 J-3.775 E.0458 G1 X.698 Y37.276 E.01155 G2 X2.008 Y36.906 I.219 J-1.732 E.04639 G3 X2.991 Y35.941 I4.674 J3.775 E.0458 G1 X3.319 Y35.823 E.01155 G3 X4.629 Y36.193 I.219 J1.732 E.04639 G2 X5.612 Y37.158 I4.674 J-3.775 E.0458 G1 X5.939 Y37.276 E.01155 G2 X7.25 Y36.906 I.219 J-1.732 E.04639 G3 X8.232 Y35.941 I4.674 J3.775 E.0458 G1 X8.56 Y35.823 E.01155 G3 X9.87 Y36.193 I.219 J1.732 E.04639 G2 X10.853 Y37.158 I4.674 J-3.775 E.0458 G1 X11.181 Y37.276 E.01155 G2 X12.491 Y36.906 I.219 J-1.732 E.04639 G3 X13.474 Y35.941 I4.674 J3.775 E.0458 G1 X13.801 Y35.823 E.01155 G3 X15.112 Y36.193 I.219 J1.732 E.04639 G2 X16.094 Y37.158 I4.674 J-3.775 E.0458 G1 X16.422 Y37.276 E.01155 G2 X17.732 Y36.906 I.219 J-1.732 E.04639 G3 X18.715 Y35.941 I4.674 J3.775 E.0458 G1 X19.043 Y35.823 E.01155 G3 X20.353 Y36.193 I.219 J1.732 E.04639 G2 X21.336 Y37.158 I4.674 J-3.775 E.0458 G1 X21.663 Y37.276 E.01155 G2 X22.974 Y36.906 I.219 J-1.732 E.04639 G3 X23.956 Y35.941 I4.674 J3.775 E.0458 G1 X24.284 Y35.823 E.01155 G3 X25.594 Y36.193 I.219 J1.732 E.04639 G2 X26.577 Y37.158 I4.674 J-3.775 E.0458 G1 X26.905 Y37.276 E.01155 G1 X27.56 Y37.234 E.02178 G1 X27.937 Y37.045 E.01399 G1 X27.937 Y34.637 E.07987 G1 X27.56 Y34.613 E.01254 G1 X26.905 Y34.285 E.0243 G2 X25.922 Y33.32 I-4.674 J3.775 E.0458 G1 X25.594 Y33.202 E.01155 G2 X24.284 Y33.572 I-.219 J1.732 E.04639 G3 X23.301 Y34.537 I-4.674 J-3.775 E.0458 G1 X22.974 Y34.655 E.01155 G3 X21.663 Y34.285 I-.219 J-1.732 E.04639 G2 X20.68 Y33.32 I-4.674 J3.775 E.0458 G1 X20.353 Y33.202 E.01155 G2 X19.043 Y33.572 I-.219 J1.732 E.04639 G3 X18.06 Y34.537 I-4.674 J-3.775 E.0458 G1 X17.732 Y34.655 E.01155 G3 X16.422 Y34.285 I-.219 J-1.732 E.04639 G2 X15.439 Y33.32 I-4.674 J3.775 E.0458 G1 X15.112 Y33.202 E.01155 G2 X13.801 Y33.572 I-.219 J1.732 E.04639 G3 X12.819 Y34.537 I-4.674 J-3.775 E.0458 G1 X12.491 Y34.655 E.01155 G3 X11.181 Y34.285 I-.219 J-1.732 E.04639 G2 X10.198 Y33.32 I-4.674 J3.775 E.0458 G1 X9.87 Y33.202 E.01155 G2 X8.56 Y33.572 I-.219 J1.732 E.04639 G3 X7.577 Y34.537 I-4.674 J-3.775 E.0458 G1 X7.25 Y34.655 E.01155 G3 X5.939 Y34.285 I-.219 J-1.732 E.04639 G2 X4.963 Y33.325 I-4.647 J3.749 E.04552 G1 X4.963 Y31.304 E.06706 G2 X5.939 Y32.034 I1.68 J-1.226 E.04105 G2 X7.25 Y31.665 I.219 J-1.732 E.04639 G3 X8.232 Y30.699 I4.674 J3.775 E.0458 G1 X8.56 Y30.582 E.01155 G3 X9.87 Y30.951 I.219 J1.732 E.04639 G2 X10.853 Y31.917 I4.674 J-3.775 E.0458 G1 X11.181 Y32.034 E.01155 G2 X12.491 Y31.665 I.219 J-1.732 E.04639 G3 X13.474 Y30.699 I4.674 J3.775 E.0458 G1 X13.801 Y30.582 E.01155 G3 X15.112 Y30.951 I.219 J1.732 E.04639 G2 X16.094 Y31.917 I4.674 J-3.775 E.0458 G1 X16.422 Y32.034 E.01155 G2 X17.732 Y31.665 I.219 J-1.732 E.04639 G3 X18.715 Y30.699 I4.674 J3.775 E.0458 G1 X19.043 Y30.582 E.01155 G3 X20.353 Y30.951 I.219 J1.732 E.04639 G2 X21.336 Y31.917 I4.674 J-3.775 E.0458 G2 X21.937 Y32.017 I.416 J-.644 E.02079 G1 X21.937 Y29.181 E.09407 G1 X21.663 Y29.044 E.01015 G2 X20.68 Y28.079 I-4.674 J3.775 E.0458 G1 X20.353 Y27.961 E.01155 G2 X19.043 Y28.331 I-.219 J1.732 E.04639 G3 X18.06 Y29.296 I-4.674 J-3.775 E.0458 G1 X17.732 Y29.414 E.01155 G3 X16.422 Y29.044 I-.219 J-1.732 E.04639 G2 X15.439 Y28.079 I-4.674 J3.775 E.0458 G1 X15.112 Y27.961 E.01155 G2 X13.801 Y28.331 I-.219 J1.732 E.04639 G3 X12.819 Y29.296 I-4.674 J-3.775 E.0458 G1 X12.491 Y29.414 E.01155 G3 X11.181 Y29.044 I-.219 J-1.732 E.04639 G2 X10.198 Y28.079 I-4.674 J3.775 E.0458 G1 X9.87 Y27.961 E.01155 G2 X8.56 Y28.331 I-.219 J1.732 E.04639 G3 X7.577 Y29.296 I-4.674 J-3.775 E.0458 G1 X7.25 Y29.414 E.01155 G3 X5.939 Y29.044 I-.219 J-1.732 E.04639 G2 X4.963 Y28.084 I-4.647 J3.749 E.04552 G1 X4.963 Y26.062 E.06706 G2 X5.939 Y26.793 I1.68 J-1.226 E.04105 G2 X7.25 Y26.424 I.219 J-1.732 E.04639 G3 X8.232 Y25.458 I4.674 J3.775 E.0458 G1 X8.56 Y25.34 E.01155 G3 X9.87 Y25.71 I.219 J1.732 E.04639 G2 X10.853 Y26.675 I4.674 J-3.775 E.0458 G1 X11.181 Y26.793 E.01155 G2 X12.491 Y26.424 I.219 J-1.732 E.04639 G3 X13.474 Y25.458 I4.674 J3.775 E.0458 G1 X13.801 Y25.34 E.01155 G3 X15.112 Y25.71 I.219 J1.732 E.04639 G2 X16.094 Y26.675 I4.674 J-3.775 E.0458 G1 X16.422 Y26.793 E.01155 G2 X17.732 Y26.424 I.219 J-1.732 E.04639 G3 X18.715 Y25.458 I4.674 J3.775 E.0458 G1 X19.043 Y25.34 E.01155 G3 X20.353 Y25.71 I.219 J1.732 E.04639 G2 X21.336 Y26.675 I4.674 J-3.775 E.0458 G2 X21.937 Y26.776 I.416 J-.644 E.02079 G1 X21.937 Y23.94 E.09407 G1 X21.663 Y23.803 E.01015 G2 X20.68 Y22.837 I-4.674 J3.775 E.0458 G1 X20.353 Y22.72 E.01155 G2 X19.043 Y23.089 I-.219 J1.732 E.04639 G3 X18.06 Y24.055 I-4.674 J-3.775 E.0458 G1 X17.732 Y24.173 E.01155 G3 X16.422 Y23.803 I-.219 J-1.732 E.04639 G2 X15.439 Y22.837 I-4.674 J3.775 E.0458 G1 X15.112 Y22.72 E.01155 G2 X13.801 Y23.089 I-.219 J1.732 E.04639 G3 X12.819 Y24.055 I-4.674 J-3.775 E.0458 G1 X12.491 Y24.173 E.01155 G3 X11.181 Y23.803 I-.219 J-1.732 E.04639 G2 X10.198 Y22.837 I-4.674 J3.775 E.0458 G1 X9.87 Y22.72 E.01155 G2 X8.56 Y23.089 I-.219 J1.732 E.04639 G3 X7.577 Y24.055 I-4.674 J-3.775 E.0458 G1 X7.25 Y24.173 E.01155 G3 X5.939 Y23.803 I-.219 J-1.732 E.04639 G2 X4.957 Y22.837 I-4.674 J3.775 E.0458 G1 X4.629 Y22.72 E.01155 G2 X3.319 Y23.089 I-.219 J1.732 E.04639 G1 X2.705 Y23.737 E.0296 G1 X.635 Y23.737 E.06864 G2 X-.285 Y22.837 I-4.357 J3.537 E.04278 G1 X-.612 Y22.72 E.01155 G2 X-1.923 Y23.089 I-.219 J1.732 E.04639 G1 X-2.537 Y23.737 E.0296 G1 X-4.606 Y23.737 E.06864 G2 X-5.526 Y22.837 I-4.357 J3.537 E.04278 G1 X-5.854 Y22.72 E.01155 G2 X-7.164 Y23.089 I-.219 J1.732 E.04639 G1 X-7.778 Y23.737 E.0296 G1 X-9.847 Y23.737 E.06864 G2 X-10.767 Y22.837 I-4.357 J3.537 E.04278 G1 X-11.095 Y22.72 E.01155 G2 X-12.405 Y23.089 I-.219 J1.732 E.04639 G1 X-13.019 Y23.737 E.0296 G1 X-15.088 Y23.737 E.06864 G2 X-16.009 Y22.837 I-4.357 J3.537 E.04278 G1 X-16.336 Y22.72 E.01155 G2 X-17.647 Y23.089 I-.219 J1.732 E.04639 G1 X-18.26 Y23.737 E.0296 G1 X-20.33 Y23.737 E.06864 G2 X-21.25 Y22.837 I-4.357 J3.537 E.04278 G1 X-21.578 Y22.72 E.01155 G2 X-22.888 Y23.089 I-.219 J1.732 E.04639 G1 X-23.502 Y23.737 E.0296 G1 X-25.563 Y23.745 E.06838 G2 X-26.491 Y22.837 I-4.398 J3.567 E.04316 G1 X-26.819 Y22.72 E.01155 G2 X-28.129 Y23.089 I-.219 J1.732 E.04639 G3 X-29.112 Y24.055 I-4.674 J-3.775 E.0458 G1 X-29.44 Y24.173 E.01155 G3 X-30.75 Y23.803 I-.219 J-1.732 E.04639 G2 X-31.733 Y22.837 I-4.674 J3.775 E.0458 G1 X-32.06 Y22.72 E.01155 G2 X-33.37 Y23.089 I-.219 J1.732 E.04639 G3 X-34.353 Y24.055 I-4.674 J-3.775 E.0458 G1 X-34.681 Y24.173 E.01155 G3 X-35.991 Y23.803 I-.219 J-1.732 E.04639 G2 X-36.974 Y22.837 I-4.674 J3.775 E.0458 G1 X-37.301 Y22.72 E.01155 G2 X-38.612 Y23.089 I-.219 J1.732 E.04639 G3 X-39.595 Y24.055 I-4.674 J-3.775 E.0458 G1 X-39.922 Y24.173 E.01155 G3 X-41.232 Y23.803 I-.219 J-1.732 E.04639 G2 X-42.215 Y22.837 I-4.674 J3.775 E.0458 G1 X-42.537 Y22.722 E.01134 G1 X-42.537 Y20.475 E.07453 G2 X-41.56 Y21.434 I4.644 J-3.752 E.04552 G1 X-41.232 Y21.552 E.01155 G2 X-39.922 Y21.182 I.219 J-1.732 E.04639 G3 X-38.939 Y20.217 I4.674 J3.775 E.0458 G1 X-38.612 Y20.099 E.01155 G3 X-37.301 Y20.469 I.219 J1.732 E.04639 G2 X-36.319 Y21.434 I4.674 J-3.775 E.0458 G1 X-35.991 Y21.552 E.01155 G2 X-34.681 Y21.182 I.219 J-1.732 E.04639 G3 X-33.698 Y20.217 I4.674 J3.775 E.0458 G1 X-33.37 Y20.099 E.01155 G3 X-32.06 Y20.469 I.219 J1.732 E.04639 G2 X-31.077 Y21.434 I4.674 J-3.775 E.0458 G1 X-30.75 Y21.552 E.01155 G2 X-29.44 Y21.182 I.219 J-1.732 E.04639 G3 X-28.457 Y20.217 I4.674 J3.775 E.0458 G1 X-28.129 Y20.099 E.01155 G3 X-26.819 Y20.469 I.219 J1.732 E.04639 G2 X-25.836 Y21.434 I4.674 J-3.775 E.0458 G1 X-25.509 Y21.552 E.01155 G2 X-24.198 Y21.182 I.219 J-1.732 E.04639 G3 X-23.215 Y20.217 I4.674 J3.775 E.0458 G1 X-22.888 Y20.099 E.01155 G3 X-21.578 Y20.469 I.219 J1.732 E.04639 G2 X-20.595 Y21.434 I4.674 J-3.775 E.0458 G1 X-20.267 Y21.552 E.01155 G2 X-18.957 Y21.182 I.219 J-1.732 E.04639 G3 X-17.974 Y20.217 I4.674 J3.775 E.0458 G1 X-17.647 Y20.099 E.01155 G3 X-16.336 Y20.469 I.219 J1.732 E.04639 G2 X-15.354 Y21.434 I4.674 J-3.775 E.0458 G1 X-15.026 Y21.552 E.01155 G2 X-13.716 Y21.182 I.219 J-1.732 E.04639 G3 X-12.733 Y20.217 I4.674 J3.775 E.0458 G1 X-12.405 Y20.099 E.01155 G3 X-11.095 Y20.469 I.219 J1.732 E.04639 G2 X-10.112 Y21.434 I4.674 J-3.775 E.0458 G1 X-9.785 Y21.552 E.01155 G2 X-8.474 Y21.182 I.219 J-1.732 E.04639 G3 X-7.492 Y20.217 I4.674 J3.775 E.0458 G1 X-7.164 Y20.099 E.01155 G3 X-5.854 Y20.469 I.219 J1.732 E.04639 G2 X-4.871 Y21.434 I4.674 J-3.775 E.0458 G1 X-4.543 Y21.552 E.01155 G2 X-3.233 Y21.182 I.219 J-1.732 E.04639 G3 X-2.25 Y20.217 I4.674 J3.775 E.0458 G1 X-1.923 Y20.099 E.01155 G3 X-.612 Y20.469 I.219 J1.732 E.04639 G2 X.37 Y21.434 I4.674 J-3.775 E.0458 G1 X.698 Y21.552 E.01155 G2 X2.008 Y21.182 I.219 J-1.732 E.04639 G3 X2.991 Y20.217 I4.674 J3.775 E.0458 G1 X3.319 Y20.099 E.01155 G3 X4.629 Y20.469 I.219 J1.732 E.04639 G2 X5.612 Y21.434 I4.674 J-3.775 E.0458 G1 X5.939 Y21.552 E.01155 G2 X7.25 Y21.182 I.219 J-1.732 E.04639 G3 X8.232 Y20.217 I4.674 J3.775 E.0458 G1 X8.56 Y20.099 E.01155 G3 X9.87 Y20.469 I.219 J1.732 E.04639 G2 X10.853 Y21.434 I4.674 J-3.775 E.0458 G1 X11.181 Y21.552 E.01155 G2 X12.491 Y21.182 I.219 J-1.732 E.04639 G3 X13.474 Y20.217 I4.674 J3.775 E.0458 G1 X13.801 Y20.099 E.01155 G3 X15.112 Y20.469 I.219 J1.732 E.04639 G2 X16.094 Y21.434 I4.674 J-3.775 E.0458 G1 X16.422 Y21.552 E.01155 G2 X17.732 Y21.182 I.219 J-1.732 E.04639 G3 X18.715 Y20.217 I4.674 J3.775 E.0458 G1 X19.043 Y20.099 E.01155 G3 X20.353 Y20.469 I.219 J1.732 E.04639 G2 X21.336 Y21.434 I4.674 J-3.775 E.0458 G2 X21.937 Y21.534 I.416 J-.644 E.02079 G1 X21.937 Y18.699 E.09407 G1 X21.663 Y18.562 E.01015 G2 X20.68 Y17.596 I-4.674 J3.775 E.0458 G1 X20.353 Y17.478 E.01155 G2 X19.043 Y17.848 I-.219 J1.732 E.04639 G3 X18.06 Y18.814 I-4.674 J-3.775 E.0458 G1 X17.732 Y18.931 E.01155 G3 X16.422 Y18.562 I-.219 J-1.732 E.04639 G2 X15.439 Y17.596 I-4.674 J3.775 E.0458 G1 X15.112 Y17.478 E.01155 G2 X13.801 Y17.848 I-.219 J1.732 E.04639 G3 X12.819 Y18.814 I-4.674 J-3.775 E.0458 G1 X12.491 Y18.931 E.01155 G3 X11.181 Y18.562 I-.219 J-1.732 E.04639 G2 X10.198 Y17.596 I-4.674 J3.775 E.0458 G1 X9.87 Y17.478 E.01155 G2 X8.56 Y17.848 I-.219 J1.732 E.04639 G3 X7.577 Y18.814 I-4.674 J-3.775 E.0458 G1 X7.25 Y18.931 E.01155 G3 X5.939 Y18.562 I-.219 J-1.732 E.04639 G2 X4.957 Y17.596 I-4.674 J3.775 E.0458 G1 X4.629 Y17.478 E.01155 G2 X3.319 Y17.848 I-.219 J1.732 E.04639 G3 X2.336 Y18.814 I-4.674 J-3.775 E.0458 G1 X2.008 Y18.931 E.01155 G3 X.698 Y18.562 I-.219 J-1.732 E.04639 G2 X-.285 Y17.596 I-4.674 J3.775 E.0458 G1 X-.612 Y17.478 E.01155 G2 X-1.923 Y17.848 I-.219 J1.732 E.04639 G3 X-2.905 Y18.814 I-4.674 J-3.775 E.0458 G1 X-3.233 Y18.931 E.01155 G3 X-4.543 Y18.562 I-.219 J-1.732 E.04639 G2 X-5.526 Y17.596 I-4.674 J3.775 E.0458 G1 X-5.854 Y17.478 E.01155 G2 X-7.164 Y17.848 I-.219 J1.732 E.04639 G3 X-8.147 Y18.814 I-4.674 J-3.775 E.0458 G1 X-8.474 Y18.931 E.01155 G3 X-9.785 Y18.562 I-.219 J-1.732 E.04639 G2 X-10.767 Y17.596 I-4.674 J3.775 E.0458 G1 X-11.095 Y17.478 E.01155 G2 X-12.405 Y17.848 I-.219 J1.732 E.04639 G3 X-13.388 Y18.814 I-4.674 J-3.775 E.0458 G1 X-13.716 Y18.931 E.01155 G3 X-15.026 Y18.562 I-.219 J-1.732 E.04639 G2 X-16.009 Y17.596 I-4.674 J3.775 E.0458 G1 X-16.336 Y17.478 E.01155 G2 X-17.647 Y17.848 I-.219 J1.732 E.04639 G3 X-18.629 Y18.814 I-4.674 J-3.775 E.0458 G1 X-18.957 Y18.931 E.01155 G3 X-20.267 Y18.562 I-.219 J-1.732 E.04639 G2 X-21.25 Y17.596 I-4.674 J3.775 E.0458 G1 X-21.578 Y17.478 E.01155 G2 X-22.888 Y17.848 I-.219 J1.732 E.04639 G3 X-23.871 Y18.814 I-4.674 J-3.775 E.0458 G1 X-24.198 Y18.931 E.01155 G3 X-25.509 Y18.562 I-.219 J-1.732 E.04639 G2 X-26.491 Y17.596 I-4.674 J3.775 E.0458 G1 X-26.819 Y17.478 E.01155 G2 X-28.129 Y17.848 I-.219 J1.732 E.04639 G3 X-29.112 Y18.814 I-4.674 J-3.775 E.0458 G1 X-29.44 Y18.931 E.01155 G3 X-30.75 Y18.562 I-.219 J-1.732 E.04639 G2 X-31.733 Y17.596 I-4.674 J3.775 E.0458 G1 X-32.06 Y17.478 E.01155 G2 X-33.37 Y17.848 I-.219 J1.732 E.04639 G3 X-34.353 Y18.814 I-4.674 J-3.775 E.0458 G1 X-34.681 Y18.931 E.01155 G3 X-35.991 Y18.562 I-.219 J-1.732 E.04639 G2 X-36.974 Y17.596 I-4.674 J3.775 E.0458 G1 X-37.301 Y17.478 E.01155 G2 X-38.612 Y17.848 I-.219 J1.732 E.04639 G3 X-39.595 Y18.814 I-4.674 J-3.775 E.0458 G1 X-39.922 Y18.931 E.01155 G3 X-41.232 Y18.562 I-.219 J-1.732 E.04639 G2 X-42.215 Y17.596 I-4.674 J3.775 E.0458 G1 X-42.543 Y17.478 E.01155 G2 X-43.631 Y17.737 I-.239 J1.415 E.03811 G1 X-47.288 Y17.737 E.12132 G2 X-47.784 Y17.478 I-.6 J.545 E.01893 G1 X-48.439 Y17.52 E.02178 G3 X-48.537 Y17.533 I-.062 J-.091 E.00339 G1 X-48.537 Y15.976 E.05165 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-48.537 Y52.81 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-48.537 Y52.467 E.01139 G1 X-47.823 Y52.467 E.02368 G1 X-47.823 Y52.263 E.00675 G1 X-47.456 Y52.263 E.01219 G2 X-46.474 Y53 I1.69 J-1.23 E.04132 G2 X-44.816 Y52.263 I.085 J-2.042 E.06236 G1 X-42.537 Y52.263 E.07559 G1 X-42.537 Y51.923 E.01129 G2 X-41.56 Y52.882 I4.644 J-3.752 E.04552 G1 X-41.232 Y53 E.01155 G2 X-39.922 Y52.63 I.219 J-1.732 E.04639 G3 X-38.939 Y51.665 I4.674 J3.775 E.0458 G1 X-38.612 Y51.547 E.01155 G3 X-37.301 Y51.917 I.219 J1.732 E.04639 G2 X-36.319 Y52.882 I4.674 J-3.775 E.0458 G1 X-35.991 Y53 E.01155 G2 X-34.681 Y52.63 I.219 J-1.732 E.04639 G3 X-33.698 Y51.665 I4.674 J3.775 E.0458 G1 X-33.37 Y51.547 E.01155 G3 X-32.06 Y51.917 I.219 J1.732 E.04639 G2 X-31.077 Y52.882 I4.674 J-3.775 E.0458 G1 X-30.75 Y53 E.01155 G2 X-29.44 Y52.63 I.219 J-1.732 E.04639 G3 X-28.457 Y51.665 I4.674 J3.775 E.0458 G1 X-28.129 Y51.547 E.01155 G3 X-26.819 Y51.917 I.219 J1.732 E.04639 G2 X-25.836 Y52.882 I4.674 J-3.775 E.0458 G1 X-25.509 Y53 E.01155 G2 X-24.198 Y52.63 I.219 J-1.732 E.04639 G3 X-23.215 Y51.665 I4.674 J3.775 E.0458 G1 X-22.888 Y51.547 E.01155 G3 X-21.578 Y51.917 I.219 J1.732 E.04639 G2 X-20.595 Y52.882 I4.674 J-3.775 E.0458 G1 X-20.267 Y53 E.01155 G2 X-18.957 Y52.63 I.219 J-1.732 E.04639 G3 X-17.974 Y51.665 I4.674 J3.775 E.0458 G1 X-17.647 Y51.547 E.01155 G3 X-16.336 Y51.917 I.219 J1.732 E.04639 G2 X-15.354 Y52.882 I4.674 J-3.775 E.0458 G1 X-15.026 Y53 E.01155 G2 X-13.716 Y52.63 I.219 J-1.732 E.04639 G3 X-12.733 Y51.665 I4.674 J3.775 E.0458 G1 X-12.405 Y51.547 E.01155 G3 X-11.095 Y51.917 I.219 J1.732 E.04639 G2 X-10.112 Y52.882 I4.674 J-3.775 E.0458 G1 X-9.785 Y53 E.01155 G2 X-8.474 Y52.63 I.219 J-1.732 E.04639 G3 X-7.492 Y51.665 I4.674 J3.775 E.0458 G1 X-7.164 Y51.547 E.01155 G3 X-5.854 Y51.917 I.219 J1.732 E.04639 G2 X-4.871 Y52.882 I4.674 J-3.775 E.0458 G1 X-4.543 Y53 E.01155 G2 X-3.233 Y52.63 I.219 J-1.732 E.04639 G3 X-2.25 Y51.665 I4.674 J3.775 E.0458 G1 X-1.923 Y51.547 E.01155 G3 X-.612 Y51.917 I.219 J1.732 E.04639 G2 X.37 Y52.882 I4.674 J-3.775 E.0458 G1 X.698 Y53 E.01155 G2 X2.008 Y52.63 I.219 J-1.732 E.04639 G3 X2.991 Y51.665 I4.674 J3.775 E.0458 G1 X3.319 Y51.547 E.01155 G3 X4.629 Y51.917 I.219 J1.732 E.04639 G2 X5.612 Y52.882 I4.674 J-3.775 E.0458 G1 X5.939 Y53 E.01155 G2 X7.25 Y52.63 I.219 J-1.732 E.04639 G3 X8.232 Y51.665 I4.674 J3.775 E.0458 G1 X8.56 Y51.547 E.01155 G3 X9.87 Y51.917 I.219 J1.732 E.04639 G2 X10.853 Y52.882 I4.674 J-3.775 E.0458 G1 X11.181 Y53 E.01155 G2 X12.491 Y52.63 I.219 J-1.732 E.04639 G3 X13.474 Y51.665 I4.674 J3.775 E.0458 G1 X13.801 Y51.547 E.01155 G3 X15.112 Y51.917 I.219 J1.732 E.04639 G2 X16.094 Y52.882 I4.674 J-3.775 E.0458 G1 X16.422 Y53 E.01155 G2 X17.732 Y52.63 I.219 J-1.732 E.04639 G3 X18.715 Y51.665 I4.674 J3.775 E.0458 G1 X19.043 Y51.547 E.01155 G3 X20.353 Y51.917 I.219 J1.732 E.04639 G2 X21.336 Y52.882 I4.674 J-3.775 E.0458 G1 X21.663 Y53 E.01155 G2 X23.321 Y52.263 I.085 J-2.042 E.06236 G1 X25.923 Y52.263 E.08629 G2 X26.905 Y53 I1.69 J-1.23 E.04132 G1 X27.56 Y52.958 E.02178 G1 X27.937 Y52.769 E.01399 G1 X27.937 Y54.397 E.05401 G1 X27.7 Y52.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y37.744 E.57795 G1 X27.7 Y32.256 F30000 G1 F12000 G1 X27.7 Y17.744 E.57795 G1 X27.515 Y17.533 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X27.223 Y17.533 E.00967 G1 X27.223 Y17.737 E.00675 G1 X26.09 Y17.737 E.03759 G2 X25.594 Y17.478 I-.6 J.545 E.01893 G2 X24.506 Y17.737 I-.239 J1.415 E.03811 G1 X22.878 Y17.737 E.05401 G1 X-3.899 Y14.263 F30000 G1 F16200 G1 X-4.563 Y14.263 E.02204 G1 X-4.563 Y13.299 E.03197 G2 X-5.526 Y12.355 I-4.574 J3.7 E.04484 G2 X-7.164 Y12.607 I-.582 J1.67 E.05721 G3 X-8.147 Y13.572 I-4.674 J-3.775 E.0458 G3 X-9.785 Y13.32 I-.582 J-1.67 E.05721 G2 X-10.767 Y12.355 I-4.674 J3.775 E.0458 G2 X-12.405 Y12.607 I-.582 J1.67 E.05721 G3 X-13.388 Y13.572 I-4.674 J-3.775 E.0458 G3 X-15.026 Y13.32 I-.582 J-1.67 E.05721 G2 X-16.037 Y12.345 I-4.054 J3.189 E.04675 G1 X-16.037 Y10.302 E.06776 G2 X-15.354 Y10.952 I3.156 J-2.636 E.03135 G2 X-13.716 Y10.7 I.582 J-1.67 E.05721 G3 X-12.733 Y9.734 I4.674 J3.775 E.0458 G3 X-11.095 Y9.986 I.582 J1.67 E.05721 G2 X-10.112 Y10.952 I4.674 J-3.775 E.0458 G2 X-8.474 Y10.7 I.582 J-1.67 E.05721 G3 X-7.492 Y9.734 I4.674 J3.775 E.0458 G3 X-5.854 Y9.986 I.582 J1.67 E.05721 G1 X-5.198 Y10.677 E.03159 G2 X-4.563 Y11.062 I.841 J-.672 E.02516 G1 X-4.563 Y8.058 E.09965 G2 X-5.526 Y7.113 I-4.574 J3.7 E.04484 G2 X-7.164 Y7.365 I-.582 J1.67 E.05721 G3 X-8.147 Y8.331 I-4.674 J-3.775 E.0458 G3 X-9.785 Y8.079 I-.582 J-1.67 E.05721 G2 X-10.767 Y7.113 I-4.674 J3.775 E.0458 G2 X-12.405 Y7.365 I-.582 J1.67 E.05721 G3 X-13.388 Y8.331 I-4.674 J-3.775 E.0458 G3 X-15.026 Y8.079 I-.582 J-1.67 E.05721 G2 X-16.037 Y7.103 I-4.054 J3.189 E.04675 G1 X-16.037 Y5.061 E.06776 G2 X-15.354 Y5.71 I3.156 J-2.636 E.03135 G2 X-13.716 Y5.458 I.582 J-1.67 E.05721 G3 X-12.733 Y4.493 I4.674 J3.775 E.0458 G3 X-11.095 Y4.745 I.582 J1.67 E.05721 G2 X-10.112 Y5.71 I4.674 J-3.775 E.0458 G2 X-8.474 Y5.458 I.582 J-1.67 E.05721 G3 X-7.492 Y4.493 I4.674 J3.775 E.0458 G3 X-5.854 Y4.745 I.582 J1.67 E.05721 G1 X-5.198 Y5.436 E.03159 G2 X-4.563 Y5.821 I.841 J-.672 E.02516 G1 X-4.563 Y2.817 E.09965 G2 X-5.526 Y1.872 I-4.574 J3.7 E.04484 G2 X-7.164 Y2.124 I-.582 J1.67 E.05721 G3 X-8.147 Y3.09 I-4.674 J-3.775 E.0458 G3 X-9.785 Y2.838 I-.582 J-1.67 E.05721 G2 X-10.767 Y1.872 I-4.674 J3.775 E.0458 G2 X-12.405 Y2.124 I-.582 J1.67 E.05721 G3 X-13.388 Y3.09 I-4.674 J-3.775 E.0458 G3 X-15.026 Y2.838 I-.582 J-1.67 E.05721 G2 X-16.037 Y1.862 I-4.054 J3.189 E.04675 G1 X-16.037 Y-.181 E.06776 G2 X-15.354 Y.469 I3.156 J-2.636 E.03135 G2 X-13.716 Y.217 I.582 J-1.67 E.05721 G3 X-12.733 Y-.748 I4.674 J3.775 E.0458 G3 X-11.095 Y-.497 I.582 J1.67 E.05721 G2 X-10.112 Y.469 I4.674 J-3.775 E.0458 G2 X-8.474 Y.217 I.582 J-1.67 E.05721 G3 X-7.492 Y-.748 I4.674 J3.775 E.0458 G3 X-5.854 Y-.497 I.582 J1.67 E.05721 G1 X-5.198 Y.195 E.03159 G2 X-4.563 Y.58 I.841 J-.672 E.02516 G1 X-4.563 Y-1.049 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-4.563 Y.58 G1 X-4.871 Y.469 G1 X-4.905 Y.44 ;WIPE_END G1 X2.725 Y.627 Z1.4 F30000 G1 X8.763 Y.775 Z1.4 G1 Z1 G1 E.8 F1800 G1 F16200 G1 X8.763 Y-.853 E.05401 G1 X9.215 Y-.824 E.01502 G1 X9.87 Y-.497 E.0243 G2 X10.853 Y.469 I4.674 J-3.775 E.0458 G1 X11.181 Y.587 E.01155 G2 X12.491 Y.217 I.219 J-1.732 E.04639 G3 X13.474 Y-.748 I4.674 J3.775 E.0458 G1 X13.801 Y-.866 E.01155 G3 X15.112 Y-.497 I.219 J1.732 E.04639 G2 X16.094 Y.469 I4.674 J-3.775 E.0458 G1 X16.422 Y.587 E.01155 G2 X17.732 Y.217 I.219 J-1.732 E.04639 G3 X18.715 Y-.748 I4.674 J3.775 E.0458 G1 X19.043 Y-.866 E.01155 G3 X20.353 Y-.497 I.219 J1.732 E.04639 G2 X21.336 Y.469 I4.674 J-3.775 E.0458 G1 X21.663 Y.587 E.01155 G2 X22.971 Y.218 I.219 J-1.729 E.0463 G2 X24.026 Y2.396 I3.232 J-.221 E.08227 G3 X22.974 Y3.207 I-1.825 J-1.28 E.04475 G3 X21.663 Y2.838 I-.219 J-1.732 E.04639 G2 X20.68 Y1.872 I-4.674 J3.775 E.0458 G1 X20.353 Y1.754 E.01155 G2 X19.043 Y2.124 I-.219 J1.732 E.04639 G3 X18.06 Y3.09 I-4.674 J-3.775 E.0458 G1 X17.732 Y3.207 E.01155 G3 X16.422 Y2.838 I-.219 J-1.732 E.04639 G2 X15.439 Y1.872 I-4.674 J3.775 E.0458 G1 X15.112 Y1.754 E.01155 G2 X13.801 Y2.124 I-.219 J1.732 E.04639 G3 X12.819 Y3.09 I-4.674 J-3.775 E.0458 G1 X12.491 Y3.207 E.01155 G3 X11.181 Y2.838 I-.219 J-1.732 E.04639 G2 X10.198 Y1.872 I-4.674 J3.775 E.0458 G1 X9.87 Y1.754 E.01155 G2 X8.763 Y2.022 I-.237 J1.442 E.03882 G1 X8.763 Y2.909 E.0294 G3 X9.484 Y2.748 I.952 J2.575 E.02458 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X8.763 Y2.909 G1 X8.763 Y2.022 G1 X9.098 Y1.855 ;WIPE_END G1 X16.634 Y.645 Z1.4 F30000 G1 X28.535 Y-1.264 Z1.4 G1 Z1 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.393961 G1 F12000 G3 X28.611 Y-.863 I-8.088 J1.758 E.0117 ;WIDTH:0.344557 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.30722 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.38548 G1 X28.591 Y.981 E.00334 ;WIDTH:0.40952 G1 X28.535 Y1.264 E.00864 G1 X25.706 Y3.198 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X27.309 Y3.04 I.452 J-3.618 E.05385 G2 X27.937 Y3.19 I.491 J-.667 E.02201 G1 X27.937 Y5.597 E.07987 G1 X27.56 Y5.786 E.01399 G1 X26.905 Y5.828 E.02178 G1 X26.577 Y5.71 E.01155 G3 X25.594 Y4.745 I3.692 J-4.74 E.0458 G2 X24.284 Y4.375 I-1.092 J1.363 E.04639 G1 X23.956 Y4.493 E.01155 G2 X22.974 Y5.458 I3.691 J4.74 E.0458 G3 X21.663 Y5.828 I-1.092 J-1.363 E.04639 G1 X21.336 Y5.71 E.01155 G3 X20.353 Y4.745 I3.691 J-4.74 E.0458 G2 X19.043 Y4.375 I-1.092 J1.363 E.04639 G1 X18.715 Y4.493 E.01155 G2 X17.732 Y5.458 I3.691 J4.74 E.0458 G3 X16.422 Y5.828 I-1.092 J-1.363 E.04639 G1 X16.094 Y5.71 E.01155 G3 X15.112 Y4.745 I3.691 J-4.74 E.0458 G2 X13.801 Y4.375 I-1.092 J1.363 E.04639 G1 X13.474 Y4.493 E.01155 G2 X12.491 Y5.458 I3.691 J4.74 E.0458 G1 X12.358 Y5.525 E.00494 G3 X10.894 Y7.777 I-2.659 J-.126 E.09338 G2 X12.491 Y8.449 I1.506 J-1.347 E.05938 G1 X12.819 Y8.331 E.01155 G2 X13.801 Y7.365 I-3.692 J-4.74 E.0458 G3 X15.112 Y6.996 I1.092 J1.363 E.04639 G1 X15.439 Y7.113 E.01155 G3 X16.422 Y8.079 I-3.691 J4.74 E.0458 G2 X17.732 Y8.449 I1.092 J-1.363 E.04639 G1 X18.06 Y8.331 E.01155 G2 X19.043 Y7.365 I-3.691 J-4.74 E.0458 G3 X20.353 Y6.996 I1.092 J1.363 E.04639 G1 X20.68 Y7.113 E.01155 G3 X21.663 Y8.079 I-3.691 J4.74 E.0458 G2 X22.974 Y8.449 I1.092 J-1.363 E.04639 G1 X23.301 Y8.331 E.01155 G2 X24.284 Y7.365 I-3.691 J-4.74 E.0458 G3 X25.594 Y6.996 I1.092 J1.363 E.04639 G1 X25.922 Y7.113 E.01155 G3 X26.905 Y8.079 I-3.691 J4.74 E.0458 G1 X27.56 Y8.407 E.0243 G1 X27.937 Y8.431 E.01254 G1 X27.937 Y10.839 E.07987 G1 X27.56 Y11.028 E.01399 G1 X26.905 Y11.069 E.02178 G1 X26.577 Y10.952 E.01155 G3 X25.594 Y9.986 I3.692 J-4.74 E.0458 G2 X24.284 Y9.616 I-1.092 J1.363 E.04639 G1 X23.956 Y9.734 E.01155 G2 X22.974 Y10.7 I3.691 J4.74 E.0458 G3 X21.663 Y11.069 I-1.092 J-1.363 E.04639 G1 X21.336 Y10.952 E.01155 G3 X20.353 Y9.986 I3.691 J-4.74 E.0458 G2 X19.043 Y9.616 I-1.092 J1.363 E.04639 G1 X18.715 Y9.734 E.01155 G2 X17.732 Y10.7 I3.691 J4.74 E.0458 G3 X16.422 Y11.069 I-1.092 J-1.363 E.04639 G1 X16.094 Y10.952 E.01155 G3 X15.112 Y9.986 I3.691 J-4.74 E.0458 G2 X13.801 Y9.616 I-1.092 J1.363 E.04639 G1 X13.474 Y9.734 E.01155 G2 X12.491 Y10.7 I3.691 J4.74 E.0458 G3 X11.181 Y11.069 I-1.092 J-1.363 E.04639 G1 X10.853 Y10.952 E.01155 G3 X9.87 Y9.986 I3.691 J-4.74 E.0458 G1 X9.215 Y9.658 E.0243 G1 X8.763 Y9.629 E.01502 G1 X8.763 Y12.505 E.09539 G3 X9.87 Y12.237 I.87 J1.174 E.03882 G1 X10.198 Y12.355 E.01155 G3 X11.181 Y13.32 I-3.691 J4.74 E.0458 G2 X12.491 Y13.69 I1.092 J-1.363 E.04639 G1 X12.819 Y13.572 E.01155 G2 X13.801 Y12.607 I-3.692 J-4.74 E.0458 G3 X15.112 Y12.237 I1.092 J1.363 E.04639 G1 X15.439 Y12.355 E.01155 G3 X16.422 Y13.32 I-3.691 J4.74 E.0458 G2 X17.732 Y13.69 I1.092 J-1.363 E.04639 G1 X18.06 Y13.572 E.01155 G2 X19.043 Y12.607 I-3.691 J-4.74 E.0458 G3 X20.353 Y12.237 I1.092 J1.363 E.04639 G1 X20.68 Y12.355 E.01155 G3 X21.663 Y13.32 I-3.691 J4.74 E.0458 G2 X22.974 Y13.69 I1.092 J-1.363 E.04639 G1 X23.301 Y13.572 E.01155 G2 X24.284 Y12.607 I-3.691 J-4.74 E.0458 G3 X25.594 Y12.237 I1.092 J1.363 E.04639 G1 X25.922 Y12.355 E.01155 G3 X26.905 Y13.32 I-3.691 J4.74 E.0458 G1 X27.56 Y13.648 E.0243 G1 X27.937 Y13.672 E.01254 G1 X27.937 Y16.08 E.07987 G1 X27.56 Y16.269 E.01399 G1 X26.905 Y16.311 E.02178 G1 X26.577 Y16.193 E.01155 G3 X25.594 Y15.227 I3.692 J-4.74 E.0458 G2 X24.284 Y14.858 I-1.092 J1.363 E.04639 G1 X23.956 Y14.975 E.01155 G2 X22.974 Y15.941 I3.691 J4.74 E.0458 G3 X21.663 Y16.311 I-1.092 J-1.363 E.04639 G1 X21.336 Y16.193 E.01155 G3 X20.353 Y15.227 I3.691 J-4.74 E.0458 G2 X19.043 Y14.858 I-1.092 J1.363 E.04639 G1 X18.715 Y14.975 E.01155 G2 X17.732 Y15.941 I3.691 J4.74 E.0458 G3 X16.422 Y16.311 I-1.092 J-1.363 E.04639 G1 X16.094 Y16.193 E.01155 G3 X15.112 Y15.227 I3.691 J-4.74 E.0458 G2 X13.801 Y14.858 I-1.092 J1.363 E.04639 G1 X13.474 Y14.975 E.01155 G2 X12.491 Y15.941 I3.691 J4.74 E.0458 G3 X11.181 Y16.311 I-1.092 J-1.363 E.04639 G1 X10.853 Y16.193 E.01155 G3 X9.87 Y15.227 I3.691 J-4.74 E.0458 G2 X8.56 Y14.858 I-1.092 J1.363 E.04639 G1 X8.232 Y14.975 E.01155 G2 X7.25 Y15.941 I3.691 J4.74 E.0458 G3 X5.939 Y16.311 I-1.092 J-1.363 E.04639 G1 X5.612 Y16.193 E.01155 G3 X4.629 Y15.227 I3.691 J-4.74 E.0458 G2 X3.319 Y14.858 I-1.092 J1.363 E.04639 G1 X2.991 Y14.975 E.01155 G2 X2.008 Y15.941 I3.691 J4.74 E.0458 G3 X.698 Y16.311 I-1.092 J-1.363 E.04639 G1 X.37 Y16.193 E.01155 G3 X-.612 Y15.227 I3.691 J-4.74 E.0458 G2 X-1.923 Y14.858 I-1.092 J1.363 E.04639 G1 X-2.25 Y14.975 E.01155 G2 X-3.233 Y15.941 I3.691 J4.74 E.0458 G3 X-4.543 Y16.311 I-1.092 J-1.363 E.04639 G1 X-4.871 Y16.193 E.01155 G3 X-5.854 Y15.227 I3.692 J-4.74 E.0458 G2 X-7.164 Y14.858 I-1.092 J1.363 E.04639 G1 X-7.492 Y14.975 E.01155 G2 X-8.474 Y15.941 I3.691 J4.74 E.0458 G3 X-9.785 Y16.311 I-1.092 J-1.363 E.04639 G1 X-10.112 Y16.193 E.01155 G3 X-11.095 Y15.227 I3.691 J-4.74 E.0458 G2 X-12.405 Y14.858 I-1.092 J1.363 E.04639 G1 X-12.733 Y14.975 E.01155 G2 X-13.716 Y15.941 I3.691 J4.74 E.0458 G3 X-15.026 Y16.311 I-1.092 J-1.363 E.04639 G1 X-15.354 Y16.193 E.01155 G3 X-16.336 Y15.227 I3.691 J-4.74 E.0458 G2 X-17.647 Y14.858 I-1.092 J1.363 E.04639 G1 X-17.974 Y14.975 E.01155 G2 X-18.957 Y15.941 I3.691 J4.74 E.0458 G3 X-20.267 Y16.311 I-1.092 J-1.363 E.04639 G1 X-20.595 Y16.193 E.01155 G3 X-21.578 Y15.227 I3.691 J-4.74 E.0458 G2 X-22.888 Y14.858 I-1.092 J1.363 E.04639 G1 X-23.215 Y14.975 E.01155 G2 X-24.198 Y15.941 I3.691 J4.74 E.0458 G3 X-25.509 Y16.311 I-1.092 J-1.363 E.04639 G1 X-25.836 Y16.193 E.01155 G3 X-26.819 Y15.227 I3.691 J-4.74 E.0458 G2 X-28.129 Y14.858 I-1.092 J1.363 E.04639 G1 X-28.457 Y14.975 E.01155 G2 X-29.44 Y15.941 I3.691 J4.74 E.0458 G3 X-30.75 Y16.311 I-1.092 J-1.363 E.04639 G1 X-31.077 Y16.193 E.01155 G3 X-32.06 Y15.227 I3.691 J-4.74 E.0458 G2 X-33.37 Y14.858 I-1.092 J1.363 E.04639 G1 X-33.698 Y14.975 E.01155 G2 X-34.681 Y15.941 I3.691 J4.74 E.0458 G3 X-35.991 Y16.311 I-1.092 J-1.363 E.04639 G1 X-36.319 Y16.193 E.01155 G3 X-37.301 Y15.227 I3.691 J-4.74 E.0458 G2 X-38.612 Y14.858 I-1.092 J1.363 E.04639 G1 X-38.939 Y14.975 E.01155 G2 X-39.922 Y15.941 I3.691 J4.74 E.0458 G3 X-41.232 Y16.311 I-1.092 J-1.363 E.04639 G1 X-41.56 Y16.193 E.01155 G3 X-42.543 Y15.227 I3.691 J-4.74 E.0458 G2 X-43.853 Y14.858 I-1.092 J1.363 E.04639 G1 X-44.181 Y14.975 E.01155 G2 X-45.163 Y15.941 I3.691 J4.74 E.0458 G3 X-46.474 Y16.311 I-1.092 J-1.363 E.04639 G1 X-46.801 Y16.193 E.01155 G3 X-47.784 Y15.227 I3.691 J-4.74 E.0458 G1 X-48.537 Y14.893 E.02732 G1 X-48.537 Y12.328 E.0851 G1 X-47.784 Y12.237 E.02515 G1 X-47.457 Y12.355 E.01155 G3 X-46.474 Y13.32 I-3.691 J4.74 E.0458 G2 X-45.163 Y13.69 I1.092 J-1.363 E.04639 G1 X-44.836 Y13.572 E.01155 G2 X-43.853 Y12.607 I-3.691 J-4.74 E.0458 G3 X-42.543 Y12.237 I1.092 J1.363 E.04639 G1 X-42.215 Y12.355 E.01155 G3 X-41.232 Y13.32 I-3.691 J4.74 E.0458 G2 X-39.922 Y13.69 I1.092 J-1.363 E.04639 G1 X-39.595 Y13.572 E.01155 G2 X-38.612 Y12.607 I-3.691 J-4.74 E.0458 G3 X-37.301 Y12.237 I1.092 J1.363 E.04639 G1 X-36.974 Y12.355 E.01155 G3 X-35.991 Y13.32 I-3.691 J4.74 E.0458 G2 X-34.681 Y13.69 I1.092 J-1.363 E.04639 G1 X-34.353 Y13.572 E.01155 G2 X-33.37 Y12.607 I-3.691 J-4.74 E.0458 G3 X-32.06 Y12.237 I1.092 J1.363 E.04639 G1 X-31.733 Y12.355 E.01155 G3 X-30.75 Y13.32 I-3.692 J4.74 E.0458 G2 X-29.44 Y13.69 I1.092 J-1.363 E.04639 G1 X-29.363 Y13.662 E.00269 G1 X-29.363 Y14.263 E.01992 G1 X-28.335 Y14.263 E.03409 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-29.363 Y14.263 G1 X-29.363 Y13.662 G1 X-29.44 Y13.69 G1 X-29.729 Y13.671 ;WIPE_END G1 X-29.495 Y6.043 Z1.4 F30000 G1 X-29.363 Y1.765 Z1.4 G1 Z1 G1 E.8 F1800 G1 F16200 G1 X-29.363 Y.136 E.05401 G3 X-30.75 Y.587 I-1.165 J-1.226 E.05 G1 X-31.077 Y.469 E.01155 G3 X-32.06 Y-.497 I3.691 J-4.74 E.0458 G2 X-33.37 Y-.866 I-1.092 J1.363 E.04639 G1 X-33.698 Y-.748 E.01155 G2 X-34.681 Y.217 I3.691 J4.74 E.0458 G3 X-35.991 Y.587 I-1.092 J-1.363 E.04639 G1 X-36.319 Y.469 E.01155 G3 X-37.301 Y-.497 I3.691 J-4.74 E.0458 G2 X-38.612 Y-.866 I-1.092 J1.363 E.04639 G1 X-38.939 Y-.748 E.01155 G2 X-39.922 Y.217 I3.691 J4.74 E.0458 G3 X-41.232 Y.587 I-1.092 J-1.363 E.04639 G1 X-41.56 Y.469 E.01155 G3 X-42.543 Y-.497 I3.691 J-4.74 E.0458 G1 X-43.198 Y-.824 E.0243 G1 X-43.678 Y-.855 E.01597 G2 X-44.586 Y-2.361 I-3.135 J.864 E.05906 G2 X-43.853 Y-3.117 I-2.911 J-3.555 E.03503 G3 X-42.543 Y-3.487 I1.092 J1.363 E.04639 G1 X-42.215 Y-3.369 E.01155 G3 X-41.232 Y-2.404 I-3.691 J4.74 E.0458 G2 X-39.922 Y-2.034 I1.092 J-1.363 E.04639 G1 X-39.595 Y-2.152 E.01155 G2 X-38.612 Y-3.117 I-3.691 J-4.74 E.0458 G3 X-37.301 Y-3.487 I1.092 J1.363 E.04639 G1 X-36.974 Y-3.369 E.01155 G3 X-35.991 Y-2.404 I-3.691 J4.74 E.0458 G2 X-34.681 Y-2.034 I1.092 J-1.363 E.04639 G1 X-34.353 Y-2.152 E.01155 G2 X-33.37 Y-3.117 I-3.691 J-4.74 E.0458 G3 X-32.06 Y-3.487 I1.092 J1.363 E.04639 G1 X-31.733 Y-3.369 E.01155 G3 X-30.75 Y-2.404 I-3.691 J4.74 E.0458 G2 X-29.44 Y-2.034 I1.092 J-1.363 E.04639 G1 X-29.363 Y-2.061 E.00269 G1 X-29.363 Y-2.263 E.00669 G1 X-28.979 Y-2.263 E.01274 G2 X-28.129 Y-3.117 I-3.275 J-4.108 E.04005 G3 X-26.819 Y-3.487 I1.092 J1.363 E.04639 G1 X-26.491 Y-3.369 E.01155 G3 X-25.509 Y-2.404 I-3.691 J4.74 E.0458 G1 X-25.228 Y-2.263 E.01042 G1 X-23.738 Y-2.263 E.04943 G2 X-22.888 Y-3.117 I-3.275 J-4.108 E.04005 G3 X-21.578 Y-3.487 I1.092 J1.363 E.04639 G1 X-21.25 Y-3.369 E.01155 G3 X-20.267 Y-2.404 I-3.691 J4.74 E.0458 G1 X-19.986 Y-2.263 E.01042 G1 X-18.496 Y-2.263 E.04943 G2 X-17.647 Y-3.117 I-3.275 J-4.108 E.04005 G3 X-16.336 Y-3.487 I1.092 J1.363 E.04639 G1 X-16.009 Y-3.369 E.01155 G3 X-15.026 Y-2.404 I-3.691 J4.74 E.0458 G2 X-13.716 Y-2.034 I1.092 J-1.363 E.04639 G1 X-13.388 Y-2.152 E.01155 G2 X-12.405 Y-3.117 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-3.487 I1.092 J1.363 E.04639 G1 X-10.767 Y-3.369 E.01155 G3 X-9.785 Y-2.404 I-3.691 J4.74 E.0458 G2 X-8.474 Y-2.034 I1.092 J-1.363 E.04639 G1 X-8.147 Y-2.152 E.01155 G2 X-7.164 Y-3.117 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-3.487 I1.092 J1.363 E.04639 G1 X-5.526 Y-3.369 E.01155 G3 X-4.543 Y-2.404 I-3.691 J4.74 E.0458 G1 X-4.263 Y-2.263 E.01042 G1 X-2.772 Y-2.263 E.04943 G2 X-1.923 Y-3.117 I-3.275 J-4.108 E.04005 G3 X-.612 Y-3.487 I1.092 J1.363 E.04639 G1 X-.285 Y-3.369 E.01155 G3 X.698 Y-2.404 I-3.691 J4.74 E.0458 G1 X.979 Y-2.263 E.01042 G1 X2.469 Y-2.263 E.04943 G2 X3.319 Y-3.117 I-3.275 J-4.108 E.04005 G3 X4.629 Y-3.487 I1.092 J1.363 E.04639 G1 X4.957 Y-3.369 E.01155 G3 X5.939 Y-2.404 I-3.691 J4.74 E.0458 G1 X6.22 Y-2.263 E.01042 G1 X7.71 Y-2.263 E.04943 G2 X8.56 Y-3.117 I-3.275 J-4.108 E.04005 G3 X9.87 Y-3.487 I1.092 J1.363 E.04639 G1 X10.198 Y-3.369 E.01155 G3 X11.181 Y-2.404 I-3.691 J4.74 E.0458 G2 X12.491 Y-2.034 I1.092 J-1.363 E.04639 G1 X12.819 Y-2.152 E.01155 G2 X13.801 Y-3.117 I-3.692 J-4.74 E.0458 G3 X15.112 Y-3.487 I1.092 J1.363 E.04639 G1 X15.439 Y-3.369 E.01155 G3 X16.422 Y-2.404 I-3.691 J4.74 E.0458 G2 X17.732 Y-2.034 I1.092 J-1.363 E.04639 G1 X18.06 Y-2.152 E.01155 G2 X19.043 Y-3.117 I-3.691 J-4.74 E.0458 G3 X20.353 Y-3.487 I1.092 J1.363 E.04639 G1 X20.68 Y-3.369 E.01155 G3 X21.663 Y-2.404 I-3.691 J4.74 E.0458 G2 X22.974 Y-2.034 I1.092 J-1.363 E.04639 G1 X23.301 Y-2.152 E.01155 G2 X24.284 Y-3.117 I-3.691 J-4.74 E.0458 G3 X25.594 Y-3.487 I1.092 J1.363 E.04639 G3 X26.083 Y-3.234 I-.1 J.792 E.01865 G3 X27.937 Y-2.731 I.114 J3.249 E.06467 G1 X27.937 Y-4.737 E.06653 G2 X27.56 Y-4.696 I-.148 J.397 E.01305 G1 X26.905 Y-4.655 E.02178 G1 X26.676 Y-4.737 E.00807 G1 X22.399 Y-4.737 E.14186 G1 X21.663 Y-4.655 E.02457 G1 X21.434 Y-4.737 E.00807 G1 X19.806 Y-4.737 E.05401 G1 X18.937 Y-9.683 F30000 G1 F16200 G1 X18.937 Y-11.311 E.05401 G2 X17.732 Y-10.266 I1.536 J2.987 E.05342 G3 X16.422 Y-9.896 I-1.092 J-1.363 E.04639 G1 X16.094 Y-10.014 E.01155 G3 X15.112 Y-10.979 I3.691 J-4.74 E.0458 G2 X13.801 Y-11.349 I-1.092 J1.363 E.04639 G1 X13.474 Y-11.231 E.01155 G2 X12.491 Y-10.266 I3.691 J4.74 E.0458 G3 X11.181 Y-9.896 I-1.092 J-1.363 E.04639 G1 X10.853 Y-10.014 E.01155 G3 X9.87 Y-10.979 I3.691 J-4.74 E.0458 G2 X8.56 Y-11.349 I-1.092 J1.363 E.04639 G1 X8.232 Y-11.231 E.01155 G2 X7.25 Y-10.266 I3.691 J4.74 E.0458 G3 X5.939 Y-9.896 I-1.092 J-1.363 E.04639 G1 X5.612 Y-10.014 E.01155 G3 X4.629 Y-10.979 I3.691 J-4.74 E.0458 G2 X3.319 Y-11.349 I-1.092 J1.363 E.04639 G1 X2.991 Y-11.231 E.01155 G2 X2.008 Y-10.266 I3.691 J4.74 E.0458 G3 X.698 Y-9.896 I-1.092 J-1.363 E.04639 G1 X.37 Y-10.014 E.01155 G3 X-.612 Y-10.979 I3.691 J-4.74 E.0458 G2 X-1.923 Y-11.349 I-1.092 J1.363 E.04639 G1 X-2.25 Y-11.231 E.01155 G2 X-3.233 Y-10.266 I3.691 J4.74 E.0458 G3 X-4.543 Y-9.896 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-10.014 E.01155 G3 X-5.854 Y-10.979 I3.691 J-4.74 E.0458 G2 X-7.164 Y-11.349 I-1.092 J1.363 E.04639 G1 X-7.492 Y-11.231 E.01155 G2 X-8.474 Y-10.266 I3.691 J4.74 E.0458 G3 X-9.785 Y-9.896 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-10.014 E.01155 G3 X-11.095 Y-10.979 I3.691 J-4.74 E.0458 G2 X-12.405 Y-11.349 I-1.092 J1.363 E.04639 G1 X-12.733 Y-11.231 E.01155 G2 X-13.716 Y-10.266 I3.691 J4.74 E.0458 G3 X-15.026 Y-9.896 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-10.014 E.01155 G3 X-16.336 Y-10.979 I3.691 J-4.74 E.0458 G2 X-17.647 Y-11.349 I-1.092 J1.363 E.04639 G1 X-17.974 Y-11.231 E.01155 G2 X-18.957 Y-10.266 I3.692 J4.74 E.0458 G3 X-20.267 Y-9.896 I-1.092 J-1.363 E.04639 G1 X-20.595 Y-10.014 E.01155 G3 X-21.578 Y-10.979 I3.691 J-4.74 E.0458 G2 X-22.888 Y-11.349 I-1.092 J1.363 E.04639 G1 X-23.215 Y-11.231 E.01155 G2 X-24.198 Y-10.266 I3.691 J4.74 E.0458 G3 X-25.509 Y-9.896 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-10.014 E.01155 G3 X-26.819 Y-10.979 I3.691 J-4.74 E.0458 G2 X-28.129 Y-11.349 I-1.092 J1.363 E.04639 G1 X-28.457 Y-11.231 E.01155 G2 X-29.44 Y-10.266 I3.691 J4.74 E.0458 G3 X-30.75 Y-9.896 I-1.092 J-1.363 E.04639 G1 X-31.077 Y-10.014 E.01155 G3 X-32.06 Y-10.979 I3.691 J-4.74 E.0458 G2 X-33.37 Y-11.349 I-1.092 J1.363 E.04639 G1 X-33.698 Y-11.231 E.01155 G2 X-34.681 Y-10.266 I3.691 J4.74 E.0458 G3 X-35.991 Y-9.896 I-1.092 J-1.363 E.04639 G1 X-36.319 Y-10.014 E.01155 G3 X-37.301 Y-10.979 I3.691 J-4.74 E.0458 G2 X-38.612 Y-11.349 I-1.092 J1.363 E.04639 G2 X-39.537 Y-10.672 I.659 J1.871 E.03857 G1 X-39.537 Y-12.683 E.0667 G2 X-38.612 Y-13.6 I-3.511 J-4.466 E.04331 G3 X-37.301 Y-13.969 I1.092 J1.363 E.04639 G1 X-36.974 Y-13.852 E.01155 G3 X-35.991 Y-12.886 I-3.691 J4.74 E.0458 G2 X-34.681 Y-12.517 I1.092 J-1.363 E.04639 G1 X-34.353 Y-12.634 E.01155 G2 X-33.37 Y-13.6 I-3.691 J-4.74 E.0458 G3 X-32.06 Y-13.969 I1.092 J1.363 E.04639 G1 X-31.733 Y-13.852 E.01155 G3 X-30.75 Y-12.886 I-3.692 J4.74 E.0458 G2 X-29.44 Y-12.517 I1.092 J-1.363 E.04639 G1 X-29.112 Y-12.634 E.01155 G2 X-28.129 Y-13.6 I-3.691 J-4.74 E.0458 G3 X-26.819 Y-13.969 I1.092 J1.363 E.04639 G1 X-26.491 Y-13.852 E.01155 G3 X-25.509 Y-12.886 I-3.691 J4.74 E.0458 G2 X-24.198 Y-12.517 I1.092 J-1.363 E.04639 G1 X-23.871 Y-12.634 E.01155 G2 X-22.888 Y-13.6 I-3.691 J-4.74 E.0458 G3 X-21.578 Y-13.969 I1.092 J1.363 E.04639 G1 X-21.25 Y-13.852 E.01155 G3 X-20.267 Y-12.886 I-3.691 J4.74 E.0458 G2 X-18.957 Y-12.517 I1.092 J-1.363 E.04639 G1 X-18.629 Y-12.634 E.01155 G2 X-17.647 Y-13.6 I-3.691 J-4.74 E.0458 G3 X-16.336 Y-13.969 I1.092 J1.363 E.04639 G1 X-16.009 Y-13.852 E.01155 G3 X-15.026 Y-12.886 I-3.691 J4.74 E.0458 G2 X-13.716 Y-12.517 I1.092 J-1.363 E.04639 G1 X-13.388 Y-12.634 E.01155 G2 X-12.405 Y-13.6 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-13.969 I1.092 J1.363 E.04639 G1 X-10.767 Y-13.852 E.01155 G3 X-9.785 Y-12.886 I-3.691 J4.74 E.0458 G2 X-8.474 Y-12.517 I1.092 J-1.363 E.04639 G1 X-8.147 Y-12.634 E.01155 G2 X-7.164 Y-13.6 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-13.969 I1.092 J1.363 E.04639 G1 X-5.526 Y-13.852 E.01155 G3 X-4.543 Y-12.886 I-3.691 J4.74 E.0458 G2 X-3.233 Y-12.517 I1.092 J-1.363 E.04639 G1 X-2.905 Y-12.634 E.01155 G2 X-1.923 Y-13.6 I-3.691 J-4.74 E.0458 G3 X-.612 Y-13.969 I1.092 J1.363 E.04639 G1 X-.285 Y-13.852 E.01155 G3 X.698 Y-12.886 I-3.692 J4.74 E.0458 G2 X2.008 Y-12.517 I1.092 J-1.363 E.04639 G1 X2.336 Y-12.634 E.01155 G2 X3.319 Y-13.6 I-3.691 J-4.74 E.0458 G3 X4.629 Y-13.969 I1.092 J1.363 E.04639 G1 X4.957 Y-13.852 E.01155 G3 X5.939 Y-12.886 I-3.691 J4.74 E.0458 G2 X7.25 Y-12.517 I1.092 J-1.363 E.04639 G1 X7.577 Y-12.634 E.01155 G2 X8.56 Y-13.6 I-3.691 J-4.74 E.0458 G3 X9.87 Y-13.969 I1.092 J1.363 E.04639 G1 X10.198 Y-13.852 E.01155 G3 X11.181 Y-12.886 I-3.691 J4.74 E.0458 G2 X12.491 Y-12.517 I1.092 J-1.363 E.04639 G1 X12.819 Y-12.634 E.01155 G2 X13.801 Y-13.6 I-3.692 J-4.74 E.0458 G3 X15.112 Y-13.969 I1.092 J1.363 E.04639 G1 X15.439 Y-13.852 E.01155 G3 X16.422 Y-12.886 I-3.691 J4.74 E.0458 G2 X17.732 Y-12.517 I1.092 J-1.363 E.04639 G2 X18.937 Y-13.488 I-.918 J-2.37 E.05217 G1 X18.937 Y-16.552 E.10163 G2 X17.732 Y-15.507 I1.536 J2.987 E.05342 G3 X16.422 Y-15.137 I-1.092 J-1.363 E.04639 G1 X16.094 Y-15.255 E.01155 G3 X15.112 Y-16.22 I3.691 J-4.74 E.0458 G2 X13.801 Y-16.59 I-1.092 J1.363 E.04639 G1 X13.474 Y-16.472 E.01155 G2 X12.491 Y-15.507 I3.691 J4.74 E.0458 G3 X11.181 Y-15.137 I-1.092 J-1.363 E.04639 G1 X10.853 Y-15.255 E.01155 G3 X9.87 Y-16.22 I3.691 J-4.74 E.0458 G2 X8.56 Y-16.59 I-1.092 J1.363 E.04639 G1 X8.232 Y-16.472 E.01155 G2 X7.25 Y-15.507 I3.691 J4.74 E.0458 G3 X5.939 Y-15.137 I-1.092 J-1.363 E.04639 G1 X5.612 Y-15.255 E.01155 G3 X4.629 Y-16.22 I3.691 J-4.74 E.0458 G2 X3.319 Y-16.59 I-1.092 J1.363 E.04639 G1 X2.991 Y-16.472 E.01155 G2 X2.008 Y-15.507 I3.691 J4.74 E.0458 G3 X.698 Y-15.137 I-1.092 J-1.363 E.04639 G1 X.37 Y-15.255 E.01155 G3 X-.612 Y-16.22 I3.691 J-4.74 E.0458 G2 X-1.923 Y-16.59 I-1.092 J1.363 E.04639 G1 X-2.25 Y-16.472 E.01155 G2 X-3.233 Y-15.507 I3.691 J4.74 E.0458 G3 X-4.543 Y-15.137 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-15.255 E.01155 G3 X-5.854 Y-16.22 I3.692 J-4.74 E.0458 G2 X-7.164 Y-16.59 I-1.092 J1.363 E.04639 G1 X-7.492 Y-16.472 E.01155 G2 X-8.474 Y-15.507 I3.691 J4.74 E.0458 G3 X-9.785 Y-15.137 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-15.255 E.01155 G3 X-11.095 Y-16.22 I3.691 J-4.74 E.0458 G2 X-12.405 Y-16.59 I-1.092 J1.363 E.04639 G1 X-12.733 Y-16.472 E.01155 G2 X-13.716 Y-15.507 I3.691 J4.74 E.0458 G3 X-15.026 Y-15.137 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-15.255 E.01155 G3 X-16.336 Y-16.22 I3.691 J-4.74 E.0458 G2 X-17.647 Y-16.59 I-1.092 J1.363 E.04639 G1 X-17.974 Y-16.472 E.01155 G2 X-18.957 Y-15.507 I3.691 J4.74 E.0458 G3 X-20.267 Y-15.137 I-1.092 J-1.363 E.04639 G1 X-20.595 Y-15.255 E.01155 G3 X-21.578 Y-16.22 I3.691 J-4.74 E.0458 G2 X-22.888 Y-16.59 I-1.092 J1.363 E.04639 G1 X-23.215 Y-16.472 E.01155 G2 X-24.198 Y-15.507 I3.691 J4.74 E.0458 G3 X-25.509 Y-15.137 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-15.255 E.01155 G3 X-26.819 Y-16.22 I3.691 J-4.74 E.0458 G2 X-28.129 Y-16.59 I-1.092 J1.363 E.04639 G1 X-28.457 Y-16.472 E.01155 G2 X-29.44 Y-15.507 I3.691 J4.74 E.0458 G3 X-30.75 Y-15.137 I-1.092 J-1.363 E.04639 G1 X-31.077 Y-15.255 E.01155 G3 X-32.06 Y-16.22 I3.691 J-4.74 E.0458 G2 X-33.37 Y-16.59 I-1.092 J1.363 E.04639 G1 X-33.698 Y-16.472 E.01155 G2 X-34.681 Y-15.507 I3.691 J4.74 E.0458 G3 X-35.991 Y-15.137 I-1.092 J-1.363 E.04639 G1 X-36.319 Y-15.255 E.01155 G3 X-37.301 Y-16.22 I3.691 J-4.74 E.0458 G2 X-38.612 Y-16.59 I-1.092 J1.363 E.04639 G2 X-39.537 Y-15.913 I.659 J1.871 E.03857 G1 X-39.537 Y-17.924 E.0667 G2 X-38.612 Y-18.841 I-3.511 J-4.466 E.04331 G1 X-38.197 Y-19.049 E.01538 G2 X-36.205 Y-18.353 I1.904 J-2.254 E.07157 G2 X-34.681 Y-17.758 I1.434 J-1.421 E.0559 G1 X-34.353 Y-17.876 E.01155 G2 X-33.37 Y-18.841 I-3.691 J-4.74 E.0458 G3 X-32.06 Y-19.211 I1.092 J1.363 E.04639 G1 X-31.733 Y-19.093 E.01155 G3 X-30.75 Y-18.128 I-3.692 J4.74 E.0458 G2 X-29.44 Y-17.758 I1.092 J-1.363 E.04639 G1 X-29.112 Y-17.876 E.01155 G2 X-28.129 Y-18.841 I-3.691 J-4.74 E.0458 G3 X-26.819 Y-19.211 I1.092 J1.363 E.04639 G1 X-26.491 Y-19.093 E.01155 G3 X-25.509 Y-18.128 I-3.691 J4.74 E.0458 G2 X-24.198 Y-17.758 I1.092 J-1.363 E.04639 G1 X-23.871 Y-17.876 E.01155 G2 X-22.888 Y-18.841 I-3.691 J-4.74 E.0458 G3 X-21.578 Y-19.211 I1.092 J1.363 E.04639 G1 X-21.25 Y-19.093 E.01155 G3 X-20.267 Y-18.128 I-3.691 J4.74 E.0458 G2 X-18.957 Y-17.758 I1.092 J-1.363 E.04639 G2 X-17.805 Y-18.674 I-.867 J-2.273 E.04962 G2 X-16.967 Y-18.979 I-.545 J-2.798 E.02969 G3 X-16.009 Y-19.093 I.557 J.602 E.03422 G3 X-15.026 Y-18.128 I-3.691 J4.74 E.0458 G2 X-13.716 Y-17.758 I1.092 J-1.363 E.04639 G1 X-13.388 Y-17.876 E.01155 G2 X-12.405 Y-18.841 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-19.211 I1.092 J1.363 E.04639 G1 X-10.767 Y-19.093 E.01155 G3 X-9.785 Y-18.128 I-3.691 J4.74 E.0458 G2 X-8.474 Y-17.758 I1.092 J-1.363 E.04639 G1 X-8.147 Y-17.876 E.01155 G2 X-7.164 Y-18.841 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-19.211 I1.092 J1.363 E.04639 G1 X-5.526 Y-19.093 E.01155 G3 X-4.543 Y-18.128 I-3.691 J4.74 E.0458 G2 X-3.233 Y-17.758 I1.092 J-1.363 E.04639 G1 X-2.905 Y-17.876 E.01155 G2 X-1.923 Y-18.841 I-3.691 J-4.74 E.0458 G3 X-.612 Y-19.211 I1.092 J1.363 E.04639 G1 X-.285 Y-19.093 E.01155 G3 X.698 Y-18.128 I-3.692 J4.74 E.0458 G2 X2.008 Y-17.758 I1.092 J-1.363 E.04639 G1 X2.336 Y-17.876 E.01155 G2 X3.319 Y-18.841 I-3.691 J-4.74 E.0458 G3 X4.629 Y-19.211 I1.092 J1.363 E.04639 G1 X4.957 Y-19.093 E.01155 G3 X5.939 Y-18.128 I-3.691 J4.74 E.0458 G2 X7.25 Y-17.758 I1.092 J-1.363 E.04639 G1 X7.577 Y-17.876 E.01155 G2 X8.56 Y-18.841 I-3.691 J-4.74 E.0458 G3 X9.87 Y-19.211 I1.092 J1.363 E.04639 G1 X10.198 Y-19.093 E.01155 G3 X11.181 Y-18.128 I-3.691 J4.74 E.0458 G2 X12.491 Y-17.758 I1.092 J-1.363 E.04639 G1 X12.819 Y-17.876 E.01155 G2 X13.801 Y-18.841 I-3.692 J-4.74 E.0458 G3 X15.112 Y-19.211 I1.092 J1.363 E.04639 G1 X15.439 Y-19.093 E.01155 G3 X16.422 Y-18.128 I-3.691 J4.74 E.0458 G2 X17.732 Y-17.758 I1.092 J-1.363 E.04639 G2 X18.937 Y-18.73 I-.918 J-2.37 E.05217 G1 X18.937 Y-20.358 E.05401 G1 X18.937 Y-25.406 F30000 G1 F16200 G1 X18.937 Y-27.035 E.05401 G2 X17.732 Y-25.99 I1.536 J2.987 E.05342 G3 X16.422 Y-25.62 I-1.092 J-1.363 E.04639 G1 X16.094 Y-25.738 E.01155 G3 X15.112 Y-26.703 I3.691 J-4.74 E.0458 G2 X13.801 Y-27.073 I-1.092 J1.363 E.04639 G1 X13.474 Y-26.955 E.01155 G2 X12.491 Y-25.99 I3.691 J4.74 E.0458 G3 X11.181 Y-25.62 I-1.092 J-1.363 E.04639 G1 X10.853 Y-25.738 E.01155 G3 X9.87 Y-26.703 I3.691 J-4.74 E.0458 G2 X8.56 Y-27.073 I-1.092 J1.363 E.04639 G1 X8.232 Y-26.955 E.01155 G2 X7.25 Y-25.99 I3.691 J4.74 E.0458 G3 X5.939 Y-25.62 I-1.092 J-1.363 E.04639 G1 X5.612 Y-25.738 E.01155 G3 X4.629 Y-26.703 I3.691 J-4.74 E.0458 G2 X3.319 Y-27.073 I-1.092 J1.363 E.04639 G1 X2.991 Y-26.955 E.01155 G2 X2.008 Y-25.99 I3.691 J4.74 E.0458 G3 X.698 Y-25.62 I-1.092 J-1.363 E.04639 G1 X.37 Y-25.738 E.01155 G3 X-.612 Y-26.703 I3.691 J-4.74 E.0458 G2 X-1.923 Y-27.073 I-1.092 J1.363 E.04639 G1 X-2.25 Y-26.955 E.01155 G2 X-3.233 Y-25.99 I3.691 J4.74 E.0458 G3 X-4.543 Y-25.62 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-25.738 E.01155 G3 X-5.854 Y-26.703 I3.692 J-4.74 E.0458 G2 X-7.164 Y-27.073 I-1.092 J1.363 E.04639 G1 X-7.492 Y-26.955 E.01155 G2 X-8.474 Y-25.99 I3.691 J4.74 E.0458 G3 X-9.785 Y-25.62 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-25.738 E.01155 G3 X-11.095 Y-26.703 I3.691 J-4.74 E.0458 G2 X-12.405 Y-27.073 I-1.092 J1.363 E.04639 G1 X-12.733 Y-26.955 E.01155 G2 X-13.716 Y-25.99 I3.691 J4.74 E.0458 G3 X-15.026 Y-25.62 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-25.738 E.01155 G3 X-16.336 Y-26.703 I3.691 J-4.74 E.0458 G2 X-17.647 Y-27.073 I-1.092 J1.363 E.04639 G1 X-17.974 Y-26.955 E.01155 G2 X-18.957 Y-25.99 I3.692 J4.74 E.0458 G3 X-20.267 Y-25.62 I-1.092 J-1.363 E.04639 G1 X-20.595 Y-25.738 E.01155 G3 X-21.578 Y-26.703 I3.691 J-4.74 E.0458 G2 X-22.888 Y-27.073 I-1.092 J1.363 E.04639 G1 X-23.215 Y-26.955 E.01155 G2 X-24.198 Y-25.99 I3.691 J4.74 E.0458 G3 X-25.509 Y-25.62 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-25.738 E.01155 G3 X-26.819 Y-26.703 I3.691 J-4.74 E.0458 G2 X-28.129 Y-27.073 I-1.092 J1.363 E.04639 G1 X-28.457 Y-26.955 E.01155 G2 X-29.44 Y-25.99 I3.691 J4.74 E.0458 G3 X-30.75 Y-25.62 I-1.092 J-1.363 E.04639 G1 X-31.077 Y-25.738 E.01155 G3 X-32.06 Y-26.703 I3.691 J-4.74 E.0458 G2 X-33.37 Y-27.073 I-1.092 J1.363 E.04639 G1 X-33.698 Y-26.955 E.01155 G2 X-34.681 Y-25.99 I3.691 J4.74 E.0458 G3 X-35.991 Y-25.62 I-1.092 J-1.363 E.04639 G1 X-36.319 Y-25.738 E.01155 G3 X-37.301 Y-26.703 I3.691 J-4.74 E.0458 G2 X-38.612 Y-27.073 I-1.092 J1.363 E.04639 G2 X-39.537 Y-26.396 I.659 J1.871 E.03857 G1 X-39.537 Y-28.407 E.0667 G2 X-38.612 Y-29.324 I-3.511 J-4.466 E.04331 G3 X-37.301 Y-29.693 I1.092 J1.363 E.04639 G1 X-36.974 Y-29.576 E.01155 G3 X-35.991 Y-28.61 I-3.691 J4.74 E.0458 G2 X-34.681 Y-28.241 I1.092 J-1.363 E.04639 G1 X-34.353 Y-28.358 E.01155 G2 X-33.37 Y-29.324 I-3.691 J-4.74 E.0458 G3 X-32.06 Y-29.693 I1.092 J1.363 E.04639 G1 X-31.733 Y-29.576 E.01155 G3 X-30.75 Y-28.61 I-3.691 J4.74 E.0458 G2 X-29.44 Y-28.241 I1.092 J-1.363 E.04639 G1 X-29.112 Y-28.358 E.01155 G2 X-28.129 Y-29.324 I-3.691 J-4.74 E.0458 G3 X-26.819 Y-29.693 I1.092 J1.363 E.04639 G1 X-26.491 Y-29.576 E.01155 G3 X-25.509 Y-28.61 I-3.691 J4.74 E.0458 G2 X-24.198 Y-28.241 I1.092 J-1.363 E.04639 G1 X-23.871 Y-28.358 E.01155 G2 X-22.888 Y-29.324 I-3.691 J-4.74 E.0458 G3 X-21.578 Y-29.693 I1.092 J1.363 E.04639 G1 X-21.25 Y-29.576 E.01155 G3 X-20.267 Y-28.61 I-3.691 J4.74 E.0458 G2 X-18.957 Y-28.241 I1.092 J-1.363 E.04639 G1 X-18.629 Y-28.358 E.01155 G2 X-17.647 Y-29.324 I-3.691 J-4.74 E.0458 G3 X-16.336 Y-29.693 I1.092 J1.363 E.04639 G1 X-16.009 Y-29.576 E.01155 G3 X-15.026 Y-28.61 I-3.691 J4.74 E.0458 G2 X-13.716 Y-28.241 I1.092 J-1.363 E.04639 G1 X-13.388 Y-28.358 E.01155 G2 X-12.405 Y-29.324 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-29.693 I1.092 J1.363 E.04639 G1 X-10.767 Y-29.576 E.01155 G3 X-9.785 Y-28.61 I-3.691 J4.74 E.0458 G2 X-8.474 Y-28.241 I1.092 J-1.363 E.04639 G1 X-8.147 Y-28.358 E.01155 G2 X-7.164 Y-29.324 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-29.693 I1.092 J1.363 E.04639 G1 X-5.526 Y-29.576 E.01155 G3 X-4.543 Y-28.61 I-3.691 J4.74 E.0458 G2 X-3.233 Y-28.241 I1.092 J-1.363 E.04639 G1 X-2.905 Y-28.358 E.01155 G2 X-1.923 Y-29.324 I-3.691 J-4.74 E.0458 G3 X-.612 Y-29.693 I1.092 J1.363 E.04639 G1 X-.285 Y-29.576 E.01155 G3 X.698 Y-28.61 I-3.691 J4.74 E.0458 G2 X2.008 Y-28.241 I1.092 J-1.363 E.04639 G1 X2.336 Y-28.358 E.01155 G2 X3.319 Y-29.324 I-3.691 J-4.74 E.0458 G3 X4.629 Y-29.693 I1.092 J1.363 E.04639 G1 X4.957 Y-29.576 E.01155 G3 X5.939 Y-28.61 I-3.691 J4.74 E.0458 G2 X7.25 Y-28.241 I1.092 J-1.363 E.04639 G1 X7.577 Y-28.358 E.01155 G2 X8.56 Y-29.324 I-3.691 J-4.74 E.0458 G3 X9.87 Y-29.693 I1.092 J1.363 E.04639 G1 X10.198 Y-29.576 E.01155 G3 X11.181 Y-28.61 I-3.691 J4.74 E.0458 G2 X12.491 Y-28.241 I1.092 J-1.363 E.04639 G1 X12.819 Y-28.358 E.01155 G2 X13.801 Y-29.324 I-3.691 J-4.74 E.0458 G3 X15.112 Y-29.693 I1.092 J1.363 E.04639 G1 X15.439 Y-29.576 E.01155 G3 X16.422 Y-28.61 I-3.691 J4.74 E.0458 G2 X17.732 Y-28.241 I1.092 J-1.363 E.04639 G2 X18.937 Y-29.212 I-.918 J-2.37 E.05217 G1 X18.937 Y-32.276 E.10163 G2 X17.732 Y-31.231 I1.536 J2.987 E.05342 G3 X16.422 Y-30.861 I-1.092 J-1.363 E.04639 G1 X16.094 Y-30.979 E.01155 G3 X15.112 Y-31.944 I3.691 J-4.74 E.0458 G2 X13.801 Y-32.314 I-1.092 J1.363 E.04639 G1 X13.474 Y-32.196 E.01155 G2 X12.491 Y-31.231 I3.691 J4.74 E.0458 G3 X11.181 Y-30.861 I-1.092 J-1.363 E.04639 G1 X10.853 Y-30.979 E.01155 G3 X9.87 Y-31.944 I3.691 J-4.74 E.0458 G2 X8.56 Y-32.314 I-1.092 J1.363 E.04639 G1 X8.232 Y-32.196 E.01155 G2 X7.25 Y-31.231 I3.691 J4.74 E.0458 G3 X5.939 Y-30.861 I-1.092 J-1.363 E.04639 G1 X5.612 Y-30.979 E.01155 G3 X4.629 Y-31.944 I3.691 J-4.74 E.0458 G2 X3.319 Y-32.314 I-1.092 J1.363 E.04639 G1 X2.991 Y-32.196 E.01155 G2 X2.008 Y-31.231 I3.691 J4.74 E.0458 G3 X.698 Y-30.861 I-1.092 J-1.363 E.04639 G1 X.37 Y-30.979 E.01155 G3 X-.612 Y-31.944 I3.691 J-4.74 E.0458 G2 X-1.923 Y-32.314 I-1.092 J1.363 E.04639 G1 X-2.25 Y-32.196 E.01155 G2 X-3.233 Y-31.231 I3.691 J4.74 E.0458 G3 X-4.543 Y-30.861 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-30.979 E.01155 G3 X-5.854 Y-31.944 I3.692 J-4.74 E.0458 G2 X-7.164 Y-32.314 I-1.092 J1.363 E.04639 G1 X-7.492 Y-32.196 E.01155 G2 X-8.474 Y-31.231 I3.691 J4.74 E.0458 G3 X-9.785 Y-30.861 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-30.979 E.01155 G3 X-11.095 Y-31.944 I3.691 J-4.74 E.0458 G2 X-12.405 Y-32.314 I-1.092 J1.363 E.04639 G1 X-12.733 Y-32.196 E.01155 G2 X-13.716 Y-31.231 I3.691 J4.74 E.0458 G3 X-15.026 Y-30.861 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-30.979 E.01155 G3 X-16.336 Y-31.944 I3.691 J-4.74 E.0458 G2 X-17.647 Y-32.314 I-1.092 J1.363 E.04639 G1 X-17.974 Y-32.196 E.01155 G2 X-18.957 Y-31.231 I3.692 J4.74 E.0458 G3 X-20.267 Y-30.861 I-1.092 J-1.363 E.04639 G1 X-20.595 Y-30.979 E.01155 G3 X-21.578 Y-31.944 I3.691 J-4.74 E.0458 G2 X-22.888 Y-32.314 I-1.092 J1.363 E.04639 G1 X-23.215 Y-32.196 E.01155 G2 X-24.198 Y-31.231 I3.691 J4.74 E.0458 G3 X-25.509 Y-30.861 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-30.979 E.01155 G3 X-26.819 Y-31.944 I3.691 J-4.74 E.0458 G2 X-28.129 Y-32.314 I-1.092 J1.363 E.04639 G1 X-28.457 Y-32.196 E.01155 G2 X-29.44 Y-31.231 I3.691 J4.74 E.0458 G3 X-30.75 Y-30.861 I-1.092 J-1.363 E.04639 G1 X-31.077 Y-30.979 E.01155 G3 X-32.06 Y-31.944 I3.691 J-4.74 E.0458 G2 X-33.37 Y-32.314 I-1.092 J1.363 E.04639 G1 X-33.698 Y-32.196 E.01155 G2 X-34.681 Y-31.231 I3.691 J4.74 E.0458 G3 X-35.991 Y-30.861 I-1.092 J-1.363 E.04639 G1 X-36.319 Y-30.979 E.01155 G3 X-37.301 Y-31.944 I3.691 J-4.74 E.0458 G2 X-38.612 Y-32.314 I-1.092 J1.363 E.04639 G2 X-39.537 Y-31.637 I.659 J1.871 E.03857 G1 X-39.537 Y-33.648 E.0667 G2 X-38.612 Y-34.565 I-3.511 J-4.466 E.04331 G3 X-37.301 Y-34.935 I1.092 J1.363 E.04639 G1 X-36.974 Y-34.817 E.01155 G3 X-35.991 Y-33.851 I-3.691 J4.74 E.0458 G2 X-34.681 Y-33.482 I1.092 J-1.363 E.04639 G1 X-34.353 Y-33.6 E.01155 G2 X-33.37 Y-34.565 I-3.691 J-4.74 E.0458 G3 X-32.06 Y-34.935 I1.092 J1.363 E.04639 G1 X-31.733 Y-34.817 E.01155 G3 X-30.75 Y-33.851 I-3.691 J4.74 E.0458 G2 X-29.44 Y-33.482 I1.092 J-1.363 E.04639 G1 X-29.112 Y-33.6 E.01155 G2 X-28.129 Y-34.565 I-3.691 J-4.74 E.0458 G3 X-26.819 Y-34.935 I1.092 J1.363 E.04639 G1 X-26.491 Y-34.817 E.01155 G3 X-25.509 Y-33.851 I-3.691 J4.74 E.0458 G2 X-24.198 Y-33.482 I1.092 J-1.363 E.04639 G1 X-23.871 Y-33.6 E.01155 G2 X-22.888 Y-34.565 I-3.691 J-4.74 E.0458 G3 X-21.578 Y-34.935 I1.092 J1.363 E.04639 G1 X-21.25 Y-34.817 E.01155 G3 X-20.267 Y-33.851 I-3.691 J4.74 E.0458 G2 X-18.957 Y-33.482 I1.092 J-1.363 E.04639 G1 X-18.629 Y-33.6 E.01155 G2 X-17.647 Y-34.565 I-3.691 J-4.74 E.0458 G3 X-16.336 Y-34.935 I1.092 J1.363 E.04639 G1 X-16.009 Y-34.817 E.01155 G3 X-15.026 Y-33.851 I-3.691 J4.74 E.0458 G2 X-13.716 Y-33.482 I1.092 J-1.363 E.04639 G1 X-13.388 Y-33.6 E.01155 G2 X-12.405 Y-34.565 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-34.935 I1.092 J1.363 E.04639 G1 X-10.767 Y-34.817 E.01155 G3 X-9.785 Y-33.851 I-3.691 J4.74 E.0458 G2 X-8.474 Y-33.482 I1.092 J-1.363 E.04639 G1 X-8.147 Y-33.6 E.01155 G2 X-7.164 Y-34.565 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-34.935 I1.092 J1.363 E.04639 G1 X-5.526 Y-34.817 E.01155 G3 X-4.543 Y-33.851 I-3.691 J4.74 E.0458 G2 X-3.233 Y-33.482 I1.092 J-1.363 E.04639 G1 X-2.905 Y-33.6 E.01155 G2 X-1.923 Y-34.565 I-3.691 J-4.74 E.0458 G3 X-.612 Y-34.935 I1.092 J1.363 E.04639 G1 X-.285 Y-34.817 E.01155 G3 X.698 Y-33.851 I-3.691 J4.74 E.0458 G2 X2.008 Y-33.482 I1.092 J-1.363 E.04639 G1 X2.336 Y-33.6 E.01155 G2 X3.319 Y-34.565 I-3.691 J-4.74 E.0458 G3 X4.629 Y-34.935 I1.092 J1.363 E.04639 G1 X4.957 Y-34.817 E.01155 G3 X5.939 Y-33.851 I-3.691 J4.74 E.0458 G2 X7.25 Y-33.482 I1.092 J-1.363 E.04639 G1 X7.577 Y-33.6 E.01155 G2 X8.56 Y-34.565 I-3.691 J-4.74 E.0458 G3 X9.87 Y-34.935 I1.092 J1.363 E.04639 G1 X10.198 Y-34.817 E.01155 G3 X11.181 Y-33.851 I-3.691 J4.74 E.0458 G2 X12.491 Y-33.482 I1.092 J-1.363 E.04639 G1 X12.819 Y-33.6 E.01155 G2 X13.801 Y-34.565 I-3.692 J-4.74 E.0458 G3 X15.112 Y-34.935 I1.092 J1.363 E.04639 G1 X15.439 Y-34.817 E.01155 G3 X16.422 Y-33.851 I-3.691 J4.74 E.0458 G2 X17.732 Y-33.482 I1.092 J-1.363 E.04639 G2 X18.937 Y-34.454 I-.918 J-2.37 E.05217 G1 X18.937 Y-36.082 E.05401 G1 X18.937 Y-46.372 F30000 G1 F16200 G1 X18.937 Y-48 E.05401 G2 X18.387 Y-47.646 I.207 J.925 E.02214 G1 X17.732 Y-46.955 E.03159 G3 X16.094 Y-46.703 I-1.056 J-1.418 E.05721 G3 X15.112 Y-47.668 I3.691 J-4.74 E.0458 G2 X13.474 Y-47.92 I-1.056 J1.418 E.05721 G2 X12.491 Y-46.955 I3.691 J4.74 E.0458 G3 X10.853 Y-46.703 I-1.056 J-1.418 E.05721 G3 X9.87 Y-47.668 I3.691 J-4.74 E.0458 G2 X8.232 Y-47.92 I-1.056 J1.418 E.05721 G2 X7.25 Y-46.955 I3.691 J4.74 E.0458 G3 X5.612 Y-46.703 I-1.056 J-1.418 E.05721 G3 X4.629 Y-47.668 I3.691 J-4.74 E.0458 G2 X2.991 Y-47.92 I-1.056 J1.418 E.05721 G2 X2.008 Y-46.955 I3.691 J4.74 E.0458 G3 X.37 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-.612 Y-47.668 I3.691 J-4.74 E.0458 G2 X-2.25 Y-47.92 I-1.056 J1.418 E.05721 G2 X-3.233 Y-46.955 I3.691 J4.74 E.0458 G3 X-4.871 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-5.854 Y-47.668 I3.692 J-4.74 E.0458 G2 X-7.492 Y-47.92 I-1.056 J1.418 E.05721 G2 X-8.474 Y-46.955 I3.691 J4.74 E.0458 G3 X-10.112 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-11.095 Y-47.668 I3.691 J-4.74 E.0458 G2 X-12.733 Y-47.92 I-1.056 J1.418 E.05721 G2 X-13.716 Y-46.955 I3.691 J4.74 E.0458 G3 X-15.354 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-16.336 Y-47.668 I3.691 J-4.74 E.0458 G2 X-17.974 Y-47.92 I-1.056 J1.418 E.05721 G2 X-18.957 Y-46.955 I3.691 J4.74 E.0458 G3 X-20.595 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-21.578 Y-47.668 I3.691 J-4.74 E.0458 G2 X-23.215 Y-47.92 I-1.056 J1.418 E.05721 G2 X-24.198 Y-46.955 I3.691 J4.74 E.0458 G3 X-25.836 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-26.819 Y-47.668 I3.691 J-4.74 E.0458 G2 X-28.457 Y-47.92 I-1.056 J1.418 E.05721 G2 X-29.44 Y-46.955 I3.691 J4.74 E.0458 G3 X-31.077 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-32.06 Y-47.668 I3.691 J-4.74 E.0458 G2 X-33.698 Y-47.92 I-1.056 J1.418 E.05721 G2 X-34.681 Y-46.955 I3.691 J4.74 E.0458 G3 X-36.319 Y-46.703 I-1.056 J-1.418 E.05721 G3 X-37.301 Y-47.668 I3.691 J-4.74 E.0458 G2 X-38.939 Y-47.92 I-1.056 J1.418 E.05721 G2 X-39.537 Y-47.361 I2.123 J2.868 E.0272 G1 X-39.537 Y-49.372 E.0667 G2 X-38.612 Y-50.289 I-3.511 J-4.466 E.04331 G3 X-36.974 Y-50.541 I1.056 J1.418 E.05721 G3 X-35.991 Y-49.575 I-3.691 J4.74 E.0458 G2 X-34.353 Y-49.323 I1.056 J-1.418 E.05721 G2 X-33.37 Y-50.289 I-3.691 J-4.74 E.0458 G3 X-31.733 Y-50.541 I1.056 J1.418 E.05721 G3 X-30.75 Y-49.575 I-3.692 J4.74 E.0458 G2 X-29.112 Y-49.323 I1.056 J-1.418 E.05721 G2 X-28.129 Y-50.289 I-3.691 J-4.74 E.0458 G3 X-26.491 Y-50.541 I1.056 J1.418 E.05721 G3 X-25.509 Y-49.575 I-3.691 J4.74 E.0458 G2 X-23.871 Y-49.323 I1.056 J-1.418 E.05721 G2 X-22.888 Y-50.289 I-3.691 J-4.74 E.0458 G3 X-21.25 Y-50.541 I1.056 J1.418 E.05721 G3 X-20.267 Y-49.575 I-3.691 J4.74 E.0458 G2 X-18.629 Y-49.323 I1.056 J-1.418 E.05721 G2 X-17.647 Y-50.289 I-3.691 J-4.74 E.0458 G3 X-16.009 Y-50.541 I1.056 J1.418 E.05721 G3 X-15.026 Y-49.575 I-3.691 J4.74 E.0458 G2 X-13.388 Y-49.323 I1.056 J-1.418 E.05721 G2 X-12.405 Y-50.289 I-3.691 J-4.74 E.0458 G3 X-10.767 Y-50.541 I1.056 J1.418 E.05721 G3 X-9.785 Y-49.575 I-3.691 J4.74 E.0458 G2 X-8.147 Y-49.323 I1.056 J-1.418 E.05721 G2 X-7.164 Y-50.289 I-3.691 J-4.74 E.0458 G3 X-5.526 Y-50.541 I1.056 J1.418 E.05721 G3 X-4.543 Y-49.575 I-3.691 J4.74 E.0458 G2 X-2.905 Y-49.323 I1.056 J-1.418 E.05721 G2 X-1.923 Y-50.289 I-3.691 J-4.74 E.0458 G3 X-.285 Y-50.541 I1.056 J1.418 E.05721 G3 X.698 Y-49.575 I-3.692 J4.74 E.0458 G2 X2.336 Y-49.323 I1.056 J-1.418 E.05721 G2 X3.319 Y-50.289 I-3.691 J-4.74 E.0458 G3 X4.957 Y-50.541 I1.056 J1.418 E.05721 G3 X5.939 Y-49.575 I-3.691 J4.74 E.0458 G2 X7.577 Y-49.323 I1.056 J-1.418 E.05721 G2 X8.56 Y-50.289 I-3.691 J-4.74 E.0458 G3 X10.198 Y-50.541 I1.056 J1.418 E.05721 G3 X11.181 Y-49.575 I-3.691 J4.74 E.0458 G2 X12.819 Y-49.323 I1.056 J-1.418 E.05721 G2 X13.801 Y-50.289 I-3.692 J-4.74 E.0458 G3 X15.439 Y-50.541 I1.056 J1.418 E.05721 G3 X16.422 Y-49.575 I-3.691 J4.74 E.0458 G2 X18.06 Y-49.323 I1.056 J-1.418 E.05721 G2 X18.937 Y-50.177 I-3.261 J-4.227 E.0407 G1 X18.937 Y-51.806 E.05401 G1 X14.963 Y-54.262 F30000 G1 F16200 G1 X14.963 Y-55.89 E.05401 G3 X15.767 Y-55.508 I-.006 J1.047 E.03049 G1 X16.422 Y-54.817 E.03159 G2 X18.06 Y-54.565 I1.056 J-1.418 E.05721 G2 X19.043 Y-55.53 I-3.691 J-4.74 E.0458 G3 X20.68 Y-55.782 I1.056 J1.418 E.05721 G3 X21.663 Y-54.817 I-3.691 J4.74 E.0458 G2 X23.301 Y-54.565 I1.056 J-1.418 E.05721 G2 X24.284 Y-55.53 I-3.691 J-4.74 E.0458 G3 X25.922 Y-55.782 I1.056 J1.418 E.05721 G3 X26.905 Y-54.817 I-3.691 J4.74 E.0458 G2 X28.542 Y-54.565 I1.056 J-1.418 E.05721 G2 X29.525 Y-55.53 I-3.691 J-4.74 E.0458 G3 X30.937 Y-55.863 I1.126 J1.614 E.04928 G1 X30.937 Y-58.044 E.07233 G1 X30.835 Y-58.151 E.00489 G2 X29.198 Y-58.403 I-1.056 J1.418 E.05721 G2 X28.215 Y-57.437 I3.691 J4.74 E.0458 G3 X26.577 Y-57.185 I-1.056 J-1.418 E.05721 G3 X25.594 Y-58.151 I3.692 J-4.74 E.0458 G2 X23.956 Y-58.403 I-1.056 J1.418 E.05721 G2 X22.974 Y-57.437 I3.691 J4.74 E.0458 G3 X21.336 Y-57.185 I-1.056 J-1.418 E.05721 G3 X20.353 Y-58.151 I3.691 J-4.74 E.0458 G2 X18.715 Y-58.403 I-1.056 J1.418 E.05721 G2 X17.732 Y-57.437 I3.691 J4.74 E.0458 G3 X16.094 Y-57.185 I-1.056 J-1.418 E.05721 G3 X15.112 Y-58.151 I3.691 J-4.74 E.0458 G1 X14.963 Y-58.225 E.00551 G1 X14.963 Y-59.737 E.05015 G1 X17.732 Y-59.688 E.09187 G1 X17.867 Y-59.737 E.00476 G1 X22.305 Y-59.737 E.1472 G1 X22.974 Y-59.688 E.02224 G1 X23.109 Y-59.737 E.00476 G1 X27.546 Y-59.737 E.1472 G1 X28.215 Y-59.688 E.02224 G1 X28.35 Y-59.737 E.00476 G1 X29.978 Y-59.737 E.05401 G1 X29.848 Y-52.263 F30000 G1 F16200 G1 X30.937 Y-52.263 E.03612 G1 X30.937 Y-52.803 E.0179 G2 X29.525 Y-53.279 I-1.345 J1.654 E.05049 G1 X29.198 Y-53.162 E.01155 G2 X28.278 Y-52.263 I3.433 J4.431 E.04273 G1 X26.207 Y-52.263 E.06871 G1 X25.594 Y-52.91 E.02955 G2 X24.284 Y-53.279 I-1.092 J1.363 E.04639 G1 X23.956 Y-53.162 E.01155 G2 X23.037 Y-52.263 I3.433 J4.431 E.04273 G1 X20.966 Y-52.263 E.06871 G1 X20.353 Y-52.91 E.02955 G2 X19.043 Y-53.279 I-1.092 J1.363 E.04639 G1 X18.715 Y-53.162 E.01155 G2 X17.732 Y-52.196 I3.691 J4.74 E.0458 G3 X16.422 Y-51.826 I-1.092 J-1.363 E.04639 G1 X16.094 Y-51.944 E.01155 G3 X15.112 Y-52.91 I3.691 J-4.74 E.0458 G1 X14.963 Y-52.984 E.00551 G1 X14.963 Y-52.737 E.00819 G1 X13.004 Y-52.737 E.065 G3 X11.181 Y-51.826 I-1.762 J-1.247 E.0704 G3 X10.034 Y-52.737 I.862 J-2.263 E.04934 G1 X7.762 Y-52.737 E.07536 G3 X5.939 Y-51.826 I-1.762 J-1.247 E.0704 G1 X5.612 Y-51.944 E.01155 G3 X4.629 Y-52.91 I3.691 J-4.74 E.0458 G2 X3.319 Y-53.279 I-1.092 J1.363 E.04639 G1 X2.991 Y-53.162 E.01155 G2 X2.008 Y-52.196 I3.691 J4.74 E.0458 G3 X.698 Y-51.826 I-1.092 J-1.363 E.04639 G1 X.37 Y-51.944 E.01155 G3 X-.612 Y-52.91 I3.691 J-4.74 E.0458 G2 X-1.923 Y-53.279 I-1.092 J1.363 E.04639 G1 X-2.25 Y-53.162 E.01155 G2 X-3.233 Y-52.196 I3.691 J4.74 E.0458 G3 X-4.543 Y-51.826 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-51.944 E.01155 G3 X-5.854 Y-52.91 I3.692 J-4.74 E.0458 G2 X-7.164 Y-53.279 I-1.092 J1.363 E.04639 G1 X-7.492 Y-53.162 E.01155 G2 X-8.474 Y-52.196 I3.691 J4.74 E.0458 G3 X-9.785 Y-51.826 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-51.944 E.01155 G3 X-11.095 Y-52.91 I3.691 J-4.74 E.0458 G2 X-12.405 Y-53.279 I-1.092 J1.363 E.04639 G1 X-12.733 Y-53.162 E.01155 G2 X-13.716 Y-52.196 I3.691 J4.74 E.0458 G3 X-15.026 Y-51.826 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-51.944 E.01155 G3 X-16.336 Y-52.91 I3.691 J-4.74 E.0458 G2 X-17.647 Y-53.279 I-1.092 J1.363 E.04639 G1 X-17.974 Y-53.162 E.01155 G2 X-18.957 Y-52.196 I3.692 J4.74 E.0458 G3 X-20.267 Y-51.826 I-1.092 J-1.363 E.04639 G1 X-20.595 Y-51.944 E.01155 G3 X-21.578 Y-52.91 I3.691 J-4.74 E.0458 G2 X-22.888 Y-53.279 I-1.092 J1.363 E.04639 G1 X-23.215 Y-53.162 E.01155 G2 X-24.198 Y-52.196 I3.691 J4.74 E.0458 G3 X-25.509 Y-51.826 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-51.944 E.01155 G3 X-26.819 Y-52.91 I3.691 J-4.74 E.0458 G1 X-27.037 Y-53.019 E.00809 G1 X-27.037 Y-52.737 E.00935 G1 X-28.927 Y-52.737 E.06269 G3 X-30.75 Y-51.826 I-1.762 J-1.247 E.0704 G3 X-31.896 Y-52.737 I.862 J-2.263 E.04934 G1 X-34.168 Y-52.737 E.07536 G3 X-35.991 Y-51.826 I-1.762 J-1.247 E.0704 G1 X-36.319 Y-51.944 E.01155 G3 X-37.301 Y-52.91 I3.691 J-4.74 E.0458 G2 X-38.612 Y-53.279 I-1.092 J1.363 E.04639 G1 X-38.939 Y-53.162 E.01155 G2 X-39.859 Y-52.263 I3.433 J4.431 E.04273 G1 X-41.93 Y-52.263 E.06871 G1 X-42.543 Y-52.91 E.02955 G2 X-43.853 Y-53.279 I-1.092 J1.363 E.04639 G1 X-44.181 Y-53.162 E.01155 G2 X-45.1 Y-52.263 I3.433 J4.431 E.04273 G1 X-47.171 Y-52.263 E.06871 G1 X-47.784 Y-52.91 E.02955 G2 X-49.094 Y-53.279 I-1.092 J1.363 E.04639 G1 X-49.422 Y-53.162 E.01155 G2 X-50.341 Y-52.263 I3.433 J4.431 E.04273 G1 X-51.537 Y-52.263 E.03966 G1 X-51.537 Y-52.696 E.01435 G1 X-51.537 Y-58.572 F30000 G1 F16200 G1 X-51.537 Y-59.737 E.03864 G1 X-50.405 Y-59.688 E.03759 G1 X-50.27 Y-59.737 E.00476 G1 X-45.832 Y-59.737 E.1472 G1 X-45.163 Y-59.688 E.02224 G1 X-45.028 Y-59.737 E.00476 G1 X-40.591 Y-59.737 E.1472 G1 X-39.922 Y-59.688 E.02224 G1 X-39.787 Y-59.737 E.00476 G1 X-35.563 Y-59.737 E.14012 G1 X-35.563 Y-57.095 E.08764 G3 X-36.646 Y-57.46 I-.239 J-1.081 E.03984 G1 X-37.301 Y-58.151 E.03159 G2 X-38.939 Y-58.403 I-1.056 J1.418 E.05721 G2 X-39.922 Y-57.437 I3.691 J4.74 E.0458 G3 X-41.56 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-42.543 Y-58.151 I3.691 J-4.74 E.0458 G2 X-44.181 Y-58.403 I-1.056 J1.418 E.05721 G2 X-45.163 Y-57.437 I3.691 J4.74 E.0458 G3 X-46.801 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-47.784 Y-58.151 I3.691 J-4.74 E.0458 G2 X-49.422 Y-58.403 I-1.056 J1.418 E.05721 G2 X-50.405 Y-57.437 I3.692 J4.74 E.0458 G1 X-51.06 Y-57.109 E.0243 G1 X-51.537 Y-57.079 E.01585 G1 X-51.537 Y-54.728 E.078 G2 X-49.75 Y-54.839 I.831 J-1.064 E.06495 G1 X-49.094 Y-55.53 E.03159 G3 X-47.457 Y-55.782 I1.056 J1.418 E.05721 G3 X-46.474 Y-54.817 I-3.691 J4.74 E.0458 G2 X-44.836 Y-54.565 I1.056 J-1.418 E.05721 G2 X-43.853 Y-55.53 I-3.691 J-4.74 E.0458 G3 X-42.215 Y-55.782 I1.056 J1.418 E.05721 G3 X-41.232 Y-54.817 I-3.691 J4.74 E.0458 G2 X-39.595 Y-54.565 I1.056 J-1.418 E.05721 G2 X-38.612 Y-55.53 I-3.691 J-4.74 E.0458 G3 X-36.974 Y-55.782 I1.056 J1.418 E.05721 G3 X-35.991 Y-54.817 I-3.691 J4.74 E.0458 G1 X-35.563 Y-54.602 E.01588 G1 X-35.563 Y-52.974 E.05401 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 X-26.495 Y-59.737 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-24.198 Y-59.688 E.07621 G1 X-24.063 Y-59.737 E.00476 G1 X-19.626 Y-59.737 E.1472 G1 X-18.957 Y-59.688 E.02224 G1 X-18.822 Y-59.737 E.00476 G1 X-14.384 Y-59.737 E.1472 G1 X-13.716 Y-59.688 E.02224 G1 X-13.581 Y-59.737 E.00476 G1 X-9.143 Y-59.737 E.1472 G1 X-8.474 Y-59.688 E.02224 G1 X-8.339 Y-59.737 E.00476 G1 X-3.902 Y-59.737 E.1472 G1 X-3.233 Y-59.688 E.02224 G1 X-3.098 Y-59.737 E.00476 G1 X1.34 Y-59.737 E.1472 G1 X2.008 Y-59.688 E.02224 G1 X2.143 Y-59.737 E.00476 G1 X6.437 Y-59.737 E.14242 G1 X6.437 Y-57.099 E.08749 G3 X5.284 Y-57.46 I-.286 J-1.11 E.0422 G1 X4.629 Y-58.151 E.03159 G2 X2.991 Y-58.403 I-1.056 J1.418 E.05721 G2 X2.008 Y-57.437 I3.691 J4.74 E.0458 G3 X.37 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-.612 Y-58.151 I3.691 J-4.74 E.0458 G2 X-2.25 Y-58.403 I-1.056 J1.418 E.05721 G2 X-3.233 Y-57.437 I3.691 J4.74 E.0458 G3 X-4.871 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-5.854 Y-58.151 I3.692 J-4.74 E.0458 G2 X-7.492 Y-58.403 I-1.056 J1.418 E.05721 G2 X-8.474 Y-57.437 I3.691 J4.74 E.0458 G3 X-10.112 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-11.095 Y-58.151 I3.691 J-4.74 E.0458 G2 X-12.733 Y-58.403 I-1.056 J1.418 E.05721 G2 X-13.716 Y-57.437 I3.691 J4.74 E.0458 G3 X-15.354 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-16.336 Y-58.151 I3.691 J-4.74 E.0458 G2 X-17.974 Y-58.403 I-1.056 J1.418 E.05721 G2 X-18.957 Y-57.437 I3.692 J4.74 E.0458 G3 X-20.595 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-21.578 Y-58.151 I3.691 J-4.74 E.0458 G2 X-23.215 Y-58.403 I-1.056 J1.418 E.05721 G2 X-24.198 Y-57.437 I3.691 J4.74 E.0458 G3 X-25.836 Y-57.185 I-1.056 J-1.418 E.05721 G3 X-26.819 Y-58.151 I3.691 J-4.74 E.0458 G1 X-27.037 Y-58.26 E.00809 G1 X-27.037 Y-55.886 E.07875 G3 X-26.164 Y-55.508 I.072 J1.03 E.0328 G1 X-25.509 Y-54.817 E.03159 G2 X-23.871 Y-54.565 I1.056 J-1.418 E.05721 G2 X-22.888 Y-55.53 I-3.691 J-4.74 E.0458 G3 X-21.25 Y-55.782 I1.056 J1.418 E.05721 G3 X-20.267 Y-54.817 I-3.691 J4.74 E.0458 G2 X-18.629 Y-54.565 I1.056 J-1.418 E.05721 G2 X-17.647 Y-55.53 I-3.691 J-4.74 E.0458 G3 X-16.009 Y-55.782 I1.056 J1.418 E.05721 G3 X-15.026 Y-54.817 I-3.691 J4.74 E.0458 G2 X-13.388 Y-54.565 I1.056 J-1.418 E.05721 G2 X-12.405 Y-55.53 I-3.691 J-4.74 E.0458 G3 X-10.767 Y-55.782 I1.056 J1.418 E.05721 G3 X-9.785 Y-54.817 I-3.691 J4.74 E.0458 G2 X-8.147 Y-54.565 I1.056 J-1.418 E.05721 G2 X-7.164 Y-55.53 I-3.691 J-4.74 E.0458 G3 X-5.526 Y-55.782 I1.056 J1.418 E.05721 G3 X-4.543 Y-54.817 I-3.691 J4.74 E.0458 G2 X-2.905 Y-54.565 I1.056 J-1.418 E.05721 G2 X-1.923 Y-55.53 I-3.691 J-4.74 E.0458 G3 X-.285 Y-55.782 I1.056 J1.418 E.05721 G3 X.698 Y-54.817 I-3.692 J4.74 E.0458 G2 X2.336 Y-54.565 I1.056 J-1.418 E.05721 G2 X3.319 Y-55.53 I-3.691 J-4.74 E.0458 G3 X4.957 Y-55.782 I1.056 J1.418 E.05721 G3 X5.939 Y-54.817 I-3.691 J4.74 E.0458 G1 X6.437 Y-54.568 E.01846 G1 X6.437 Y-52.939 E.05401 G1 X6.851 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X14.549 Y-60 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X12.549 Y-60 ;WIPE_END G1 X6.144 Y-55.848 Z1.4 F30000 G1 X-16.446 Y-41.2 Z1.4 G1 Z1 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-15.687 Y-39.789 I-2.285 J2.138 E.05373 G3 X-15.026 Y-39.093 I-2.687 J3.214 E.03193 G2 X-13.716 Y-38.723 I1.092 J-1.363 E.04639 G1 X-13.388 Y-38.841 E.01155 G2 X-12.405 Y-39.806 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-40.176 I1.092 J1.363 E.04639 G1 X-10.767 Y-40.058 E.01155 G3 X-9.785 Y-39.093 I-3.691 J4.74 E.0458 G2 X-8.474 Y-38.723 I1.092 J-1.363 E.04639 G1 X-8.147 Y-38.841 E.01155 G2 X-7.164 Y-39.806 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-40.176 I1.092 J1.363 E.04639 G1 X-5.526 Y-40.058 E.01155 G3 X-4.543 Y-39.093 I-3.691 J4.74 E.0458 G2 X-3.233 Y-38.723 I1.092 J-1.363 E.04639 G1 X-2.905 Y-38.841 E.01155 G2 X-1.923 Y-39.806 I-3.691 J-4.74 E.0458 G3 X-.612 Y-40.176 I1.092 J1.363 E.04639 G1 X-.285 Y-40.058 E.01155 G3 X.698 Y-39.093 I-3.692 J4.74 E.0458 G2 X2.008 Y-38.723 I1.092 J-1.363 E.04639 G1 X2.336 Y-38.841 E.01155 G2 X3.319 Y-39.806 I-3.691 J-4.74 E.0458 G3 X4.629 Y-40.176 I1.092 J1.363 E.04639 G1 X4.957 Y-40.058 E.01155 G3 X5.939 Y-39.093 I-3.691 J4.74 E.0458 G2 X7.25 Y-38.723 I1.092 J-1.363 E.04639 G1 X7.577 Y-38.841 E.01155 G2 X8.56 Y-39.806 I-3.691 J-4.74 E.0458 G3 X9.87 Y-40.176 I1.092 J1.363 E.04639 G1 X10.198 Y-40.058 E.01155 G3 X11.181 Y-39.093 I-3.691 J4.74 E.0458 G2 X12.491 Y-38.723 I1.092 J-1.363 E.04639 G1 X12.819 Y-38.841 E.01155 G2 X13.801 Y-39.806 I-3.692 J-4.74 E.0458 G3 X15.112 Y-40.176 I1.092 J1.363 E.04639 G1 X15.439 Y-40.058 E.01155 G3 X16.422 Y-39.093 I-3.691 J4.74 E.0458 G2 X17.732 Y-38.723 I1.092 J-1.363 E.04639 G2 X18.937 Y-39.695 I-.918 J-2.37 E.05217 G1 X18.937 Y-37.517 E.07223 G2 X17.732 Y-36.472 I1.536 J2.987 E.05342 G3 X16.422 Y-36.102 I-1.092 J-1.363 E.04639 G1 X16.094 Y-36.22 E.01155 G3 X15.112 Y-37.186 I3.691 J-4.74 E.0458 G2 X13.801 Y-37.555 I-1.092 J1.363 E.04639 G1 X13.474 Y-37.438 E.01155 G2 X12.491 Y-36.472 I3.691 J4.74 E.0458 G3 X11.181 Y-36.102 I-1.092 J-1.363 E.04639 G1 X10.853 Y-36.22 E.01155 G3 X9.87 Y-37.186 I3.691 J-4.74 E.0458 G2 X8.56 Y-37.555 I-1.092 J1.363 E.04639 G1 X8.232 Y-37.438 E.01155 G2 X7.25 Y-36.472 I3.691 J4.74 E.0458 G3 X5.939 Y-36.102 I-1.092 J-1.363 E.04639 G1 X5.612 Y-36.22 E.01155 G3 X4.629 Y-37.186 I3.691 J-4.74 E.0458 G2 X3.319 Y-37.555 I-1.092 J1.363 E.04639 G1 X2.991 Y-37.438 E.01155 G2 X2.008 Y-36.472 I3.691 J4.74 E.0458 G3 X.698 Y-36.102 I-1.092 J-1.363 E.04639 G1 X.37 Y-36.22 E.01155 G3 X-.612 Y-37.186 I3.691 J-4.74 E.0458 G2 X-1.923 Y-37.555 I-1.092 J1.363 E.04639 G1 X-2.25 Y-37.438 E.01155 G2 X-3.233 Y-36.472 I3.691 J4.74 E.0458 G3 X-4.543 Y-36.102 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-36.22 E.01155 G3 X-5.854 Y-37.186 I3.692 J-4.74 E.0458 G2 X-7.164 Y-37.555 I-1.092 J1.363 E.04639 G1 X-7.492 Y-37.438 E.01155 G2 X-8.474 Y-36.472 I3.691 J4.74 E.0458 G3 X-9.785 Y-36.102 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-36.22 E.01155 G3 X-11.095 Y-37.186 I3.691 J-4.74 E.0458 G2 X-12.405 Y-37.555 I-1.092 J1.363 E.04639 M73 P22 R63 G1 X-12.733 Y-37.438 E.01155 G2 X-13.716 Y-36.472 I3.691 J4.74 E.0458 G3 X-15.026 Y-36.102 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-36.22 E.01155 G3 X-16.336 Y-37.186 I3.691 J-4.74 E.0458 G1 X-16.544 Y-37.29 E.00771 G3 X-18.77 Y-36.669 I-1.806 J-2.178 E.07896 G3 X-20.267 Y-36.102 I-1.408 J-1.46 E.05459 G1 X-20.595 Y-36.22 E.01155 G3 X-21.578 Y-37.186 I3.691 J-4.74 E.0458 G2 X-22.888 Y-37.555 I-1.092 J1.363 E.04639 G1 X-23.215 Y-37.438 E.01155 G2 X-24.198 Y-36.472 I3.691 J4.74 E.0458 G3 X-25.509 Y-36.102 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-36.22 E.01155 G3 X-26.819 Y-37.186 I3.691 J-4.74 E.0458 G2 X-28.129 Y-37.555 I-1.092 J1.363 E.04639 G1 X-28.457 Y-37.438 E.01155 G2 X-29.44 Y-36.472 I3.691 J4.74 E.0458 G3 X-30.75 Y-36.102 I-1.092 J-1.363 E.04639 G1 X-31.077 Y-36.22 E.01155 G3 X-32.06 Y-37.186 I3.691 J-4.74 E.0458 G2 X-33.37 Y-37.555 I-1.092 J1.363 E.04639 G1 X-33.698 Y-37.438 E.01155 G2 X-34.681 Y-36.472 I3.691 J4.74 E.0458 G3 X-35.991 Y-36.102 I-1.092 J-1.363 E.04639 G3 X-36.485 Y-36.359 I.103 J-.8 E.01885 G3 X-38.66 Y-37.538 I.296 J-3.143 E.08432 G2 X-39.537 Y-36.879 I.71 J1.857 E.03687 G1 X-39.537 Y-35.25 E.05401 G1 X-39.285 Y-38.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465145 G1 F12000 G1 X-39.333 Y-38.461 E.0101 ;WIDTH:0.441853 G3 X-39.356 Y-38.68 I3.324 J-.452 E.00717 ;WIDTH:0.401239 G1 X-39.375 Y-38.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-39.682 I8.952 J-.421 E.02139 ;WIDTH:0.399141 G3 X-39.356 Y-39.896 I3.283 J.204 E.00624 ;WIDTH:0.439032 G1 X-39.337 Y-40.088 E.00622 ;WIDTH:0.475343 G3 X-39.285 Y-40.405 I4.888 J.63 E.01132 G1 X-38.415 Y-41.328 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-37.025 Y-42.136 I2.488 J2.678 E.05375 G2 X-38.612 Y-42.797 I-1.495 J1.356 E.05888 G2 X-39.537 Y-42.12 I.659 J1.871 E.03857 G1 X-39.537 Y-44.13 E.0667 G2 X-38.612 Y-45.048 I-3.511 J-4.466 E.04331 G3 X-37.301 Y-45.417 I1.092 J1.363 E.04639 G1 X-36.974 Y-45.3 E.01155 G3 X-35.991 Y-44.334 I-3.691 J4.74 E.0458 G2 X-34.681 Y-43.964 I1.092 J-1.363 E.04639 G1 X-34.353 Y-44.082 E.01155 G2 X-33.37 Y-45.048 I-3.691 J-4.74 E.0458 G3 X-32.06 Y-45.417 I1.092 J1.363 E.04639 G1 X-31.733 Y-45.3 E.01155 G3 X-30.75 Y-44.334 I-3.692 J4.74 E.0458 G2 X-29.44 Y-43.964 I1.092 J-1.363 E.04639 G1 X-29.112 Y-44.082 E.01155 G2 X-28.129 Y-45.048 I-3.691 J-4.74 E.0458 G3 X-26.819 Y-45.417 I1.092 J1.363 E.04639 G1 X-26.491 Y-45.3 E.01155 G3 X-25.509 Y-44.334 I-3.691 J4.74 E.0458 G2 X-24.198 Y-43.964 I1.092 J-1.363 E.04639 G1 X-23.871 Y-44.082 E.01155 G2 X-22.888 Y-45.048 I-3.691 J-4.74 E.0458 G3 X-21.578 Y-45.417 I1.092 J1.363 E.04639 G1 X-21.25 Y-45.3 E.01155 G3 X-20.267 Y-44.334 I-3.691 J4.74 E.0458 G2 X-18.957 Y-43.964 I1.092 J-1.363 E.04639 G1 X-18.629 Y-44.082 E.01155 G2 X-17.647 Y-45.048 I-3.691 J-4.74 E.0458 G3 X-16.336 Y-45.417 I1.092 J1.363 E.04639 G1 X-16.009 Y-45.3 E.01155 G3 X-15.026 Y-44.334 I-3.691 J4.74 E.0458 G2 X-13.716 Y-43.964 I1.092 J-1.363 E.04639 G1 X-13.388 Y-44.082 E.01155 G2 X-12.405 Y-45.048 I-3.691 J-4.74 E.0458 G3 X-11.095 Y-45.417 I1.092 J1.363 E.04639 G1 X-10.767 Y-45.3 E.01155 G3 X-9.785 Y-44.334 I-3.691 J4.74 E.0458 G2 X-8.474 Y-43.964 I1.092 J-1.363 E.04639 G1 X-8.147 Y-44.082 E.01155 G2 X-7.164 Y-45.048 I-3.691 J-4.74 E.0458 G3 X-5.854 Y-45.417 I1.092 J1.363 E.04639 G1 X-5.526 Y-45.3 E.01155 G3 X-4.543 Y-44.334 I-3.691 J4.74 E.0458 G2 X-3.233 Y-43.964 I1.092 J-1.363 E.04639 G1 X-2.905 Y-44.082 E.01155 G2 X-1.923 Y-45.048 I-3.691 J-4.74 E.0458 G3 X-.612 Y-45.417 I1.092 J1.363 E.04639 G1 X-.285 Y-45.3 E.01155 G3 X.698 Y-44.334 I-3.692 J4.74 E.0458 G2 X2.008 Y-43.964 I1.092 J-1.363 E.04639 G1 X2.336 Y-44.082 E.01155 G2 X3.319 Y-45.048 I-3.691 J-4.74 E.0458 G3 X4.629 Y-45.417 I1.092 J1.363 E.04639 G1 X4.957 Y-45.3 E.01155 G3 X5.939 Y-44.334 I-3.691 J4.74 E.0458 G2 X7.25 Y-43.964 I1.092 J-1.363 E.04639 G1 X7.577 Y-44.082 E.01155 G2 X8.56 Y-45.048 I-3.691 J-4.74 E.0458 G3 X9.87 Y-45.417 I1.092 J1.363 E.04639 G1 X10.198 Y-45.3 E.01155 G3 X11.181 Y-44.334 I-3.691 J4.74 E.0458 G2 X12.491 Y-43.964 I1.092 J-1.363 E.04639 G1 X12.819 Y-44.082 E.01155 G2 X13.801 Y-45.048 I-3.692 J-4.74 E.0458 G3 X15.112 Y-45.417 I1.092 J1.363 E.04639 G1 X15.439 Y-45.3 E.01155 G3 X16.422 Y-44.334 I-3.691 J4.74 E.0458 G2 X17.732 Y-43.964 I1.092 J-1.363 E.04639 G2 X18.937 Y-44.936 I-.918 J-2.37 E.05217 G1 X18.937 Y-42.759 E.07223 G2 X17.732 Y-41.713 I1.536 J2.987 E.05342 G3 X16.422 Y-41.344 I-1.092 J-1.363 E.04639 G1 X16.094 Y-41.461 E.01155 G3 X15.112 Y-42.427 I3.691 J-4.74 E.0458 G2 X13.801 Y-42.797 I-1.092 J1.363 E.04639 G1 X13.474 Y-42.679 E.01155 G2 X12.491 Y-41.713 I3.691 J4.74 E.0458 G3 X11.181 Y-41.344 I-1.092 J-1.363 E.04639 G1 X10.853 Y-41.461 E.01155 G3 X9.87 Y-42.427 I3.691 J-4.74 E.0458 G2 X8.56 Y-42.797 I-1.092 J1.363 E.04639 G1 X8.232 Y-42.679 E.01155 G2 X7.25 Y-41.713 I3.691 J4.74 E.0458 G3 X5.939 Y-41.344 I-1.092 J-1.363 E.04639 G1 X5.612 Y-41.461 E.01155 G3 X4.629 Y-42.427 I3.691 J-4.74 E.0458 G2 X3.319 Y-42.797 I-1.092 J1.363 E.04639 G1 X2.991 Y-42.679 E.01155 G2 X2.008 Y-41.713 I3.691 J4.74 E.0458 G3 X.698 Y-41.344 I-1.092 J-1.363 E.04639 G1 X.37 Y-41.461 E.01155 G3 X-.612 Y-42.427 I3.691 J-4.74 E.0458 G2 X-1.923 Y-42.797 I-1.092 J1.363 E.04639 G1 X-2.25 Y-42.679 E.01155 G2 X-3.233 Y-41.713 I3.691 J4.74 E.0458 G3 X-4.543 Y-41.344 I-1.092 J-1.363 E.04639 G1 X-4.871 Y-41.461 E.01155 G3 X-5.854 Y-42.427 I3.691 J-4.74 E.0458 G2 X-7.164 Y-42.797 I-1.092 J1.363 E.04639 G1 X-7.492 Y-42.679 E.01155 G2 X-8.474 Y-41.713 I3.691 J4.74 E.0458 G3 X-9.785 Y-41.344 I-1.092 J-1.363 E.04639 G1 X-10.112 Y-41.461 E.01155 G3 X-11.095 Y-42.427 I3.691 J-4.74 E.0458 G2 X-12.405 Y-42.797 I-1.092 J1.363 E.04639 G1 X-12.733 Y-42.679 E.01155 G2 X-13.716 Y-41.713 I3.691 J4.74 E.0458 G3 X-15.026 Y-41.344 I-1.092 J-1.363 E.04639 G1 X-15.354 Y-41.461 E.01155 G3 X-16.336 Y-42.427 I3.691 J-4.74 E.0458 G2 X-17.647 Y-42.797 I-1.092 J1.363 E.04639 G2 X-18.774 Y-41.906 I.844 J2.228 E.04843 G2 X-19.633 Y-41.597 I.527 J2.809 E.0304 G3 X-20.595 Y-41.461 I-.575 J-.599 E.03442 G3 X-21.578 Y-42.427 I3.691 J-4.74 E.0458 G2 X-22.888 Y-42.797 I-1.092 J1.363 E.04639 G1 X-23.215 Y-42.679 E.01155 G2 X-24.198 Y-41.713 I3.691 J4.74 E.0458 G3 X-25.509 Y-41.344 I-1.092 J-1.363 E.04639 G1 X-25.836 Y-41.461 E.01155 G3 X-26.819 Y-42.427 I3.691 J-4.74 E.0458 G2 X-28.129 Y-42.797 I-1.092 J1.363 E.04639 G1 X-28.457 Y-42.679 E.01155 G2 X-29.44 Y-41.713 I3.691 J4.74 E.0458 G3 X-30.75 Y-41.344 I-1.092 J-1.363 E.04639 G1 X-31.077 Y-41.461 E.01155 G3 X-32.06 Y-42.427 I3.691 J-4.74 E.0458 G2 X-33.37 Y-42.797 I-1.092 J1.363 E.04639 G1 X-33.698 Y-42.679 E.01155 G2 X-34.668 Y-41.727 I3.639 J4.678 E.04518 G3 X-33.404 Y-39.771 I-1.856 J2.586 E.07909 G3 X-32.06 Y-40.176 I1.123 J1.295 E.04797 G1 X-31.733 Y-40.058 E.01155 G3 X-30.75 Y-39.093 I-3.692 J4.74 E.0458 G2 X-29.44 Y-38.723 I1.092 J-1.363 E.04639 G1 X-29.112 Y-38.841 E.01155 G2 X-28.129 Y-39.806 I-3.691 J-4.74 E.0458 G3 X-26.819 Y-40.176 I1.092 J1.363 E.04639 G1 X-26.491 Y-40.058 E.01155 G3 X-25.509 Y-39.093 I-3.691 J4.74 E.0458 G2 X-24.198 Y-38.723 I1.092 J-1.363 E.04639 G1 X-23.871 Y-38.841 E.01155 G2 X-22.888 Y-39.806 I-3.691 J-4.74 E.0458 G1 X-22.233 Y-40.134 E.0243 G3 X-20.922 Y-39.784 I.385 J1.186 E.04757 G2 X-20.723 Y-38.186 I2.923 J.446 E.0541 G1 X-15.869 Y-22.369 F30000 G1 F16200 G3 X-15.681 Y-20.771 I-2.554 J1.111 E.05417 G2 X-14.371 Y-20.42 I.925 J-.836 E.04757 G1 X-13.716 Y-20.748 E.0243 G3 X-12.733 Y-21.714 I4.674 J3.775 E.0458 G1 X-12.405 Y-21.831 E.01155 G3 X-11.095 Y-21.462 I.219 J1.732 E.04639 G2 X-10.112 Y-20.496 I4.674 J-3.775 E.0458 G1 X-9.785 Y-20.379 E.01155 G2 X-8.474 Y-20.748 I.219 J-1.732 E.04639 G3 X-7.492 Y-21.714 I4.674 J3.775 E.0458 G1 X-7.164 Y-21.831 E.01155 G3 X-5.854 Y-21.462 I.219 J1.732 E.04639 G2 X-4.871 Y-20.496 I4.674 J-3.775 E.0458 G1 X-4.543 Y-20.379 E.01155 G2 X-3.233 Y-20.748 I.219 J-1.732 E.04639 G3 X-2.25 Y-21.714 I4.674 J3.775 E.0458 G1 X-1.923 Y-21.831 E.01155 G3 X-.612 Y-21.462 I.219 J1.732 E.04639 G2 X.37 Y-20.496 I4.674 J-3.775 E.0458 G1 X.698 Y-20.379 E.01155 G2 X2.008 Y-20.748 I.219 J-1.732 E.04639 G3 X2.991 Y-21.714 I4.674 J3.775 E.0458 G1 X3.319 Y-21.831 E.01155 G3 X4.629 Y-21.462 I.219 J1.732 E.04639 G2 X5.612 Y-20.496 I4.674 J-3.775 E.0458 G1 X5.939 Y-20.379 E.01155 G2 X7.25 Y-20.748 I.219 J-1.732 E.04639 G3 X8.232 Y-21.714 I4.674 J3.775 E.0458 G1 X8.56 Y-21.831 E.01155 G3 X9.87 Y-21.462 I.219 J1.732 E.04639 G2 X10.853 Y-20.496 I4.674 J-3.775 E.0458 G1 X11.181 Y-20.379 E.01155 G2 X12.491 Y-20.748 I.219 J-1.732 E.04639 G3 X13.474 Y-21.714 I4.674 J3.775 E.0458 G1 X13.801 Y-21.831 E.01155 G3 X15.112 Y-21.462 I.219 J1.732 E.04639 G2 X16.094 Y-20.496 I4.674 J-3.775 E.0458 G1 X16.422 Y-20.379 E.01155 G2 X17.732 Y-20.748 I.219 J-1.732 E.04639 G3 X18.937 Y-21.793 I2.741 J1.942 E.05342 G1 X18.937 Y-23.971 E.07223 G3 X17.732 Y-22.999 I-2.122 J-1.399 E.05217 G3 X16.422 Y-23.369 I-.219 J-1.732 E.04639 G2 X15.439 Y-24.334 I-4.674 J3.775 E.0458 G1 X15.112 Y-24.452 E.01155 G2 X13.801 Y-24.082 I-.219 J1.732 E.04639 G3 X12.819 Y-23.117 I-4.674 J-3.775 E.0458 G1 X12.491 Y-22.999 E.01155 G3 X11.181 Y-23.369 I-.219 J-1.732 E.04639 G2 X10.198 Y-24.334 I-4.674 J3.775 E.0458 G1 X9.87 Y-24.452 E.01155 G2 X8.56 Y-24.082 I-.219 J1.732 E.04639 G3 X7.577 Y-23.117 I-4.674 J-3.775 E.0458 G1 X7.25 Y-22.999 E.01155 G3 X5.939 Y-23.369 I-.219 J-1.732 E.04639 G2 X4.957 Y-24.334 I-4.674 J3.775 E.0458 G1 X4.629 Y-24.452 E.01155 G2 X3.319 Y-24.082 I-.219 J1.732 E.04639 G3 X2.336 Y-23.117 I-4.674 J-3.775 E.0458 G1 X2.008 Y-22.999 E.01155 G3 X.698 Y-23.369 I-.219 J-1.732 E.04639 G2 X-.285 Y-24.334 I-4.674 J3.775 E.0458 G1 X-.612 Y-24.452 E.01155 G2 X-1.923 Y-24.082 I-.219 J1.732 E.04639 G3 X-2.905 Y-23.117 I-4.674 J-3.775 E.0458 G1 X-3.233 Y-22.999 E.01155 G3 X-4.543 Y-23.369 I-.219 J-1.732 E.04639 G2 X-5.526 Y-24.334 I-4.674 J3.775 E.0458 G1 X-5.854 Y-24.452 E.01155 G2 X-7.164 Y-24.082 I-.219 J1.732 E.04639 G3 X-8.147 Y-23.117 I-4.674 J-3.775 E.0458 G1 X-8.474 Y-22.999 E.01155 G3 X-9.785 Y-23.369 I-.219 J-1.732 E.04639 G2 X-10.767 Y-24.334 I-4.674 J3.775 E.0458 G1 X-11.095 Y-24.452 E.01155 G2 X-12.405 Y-24.082 I-.219 J1.732 E.04639 G3 X-13.388 Y-23.117 I-4.674 J-3.775 E.0458 G1 X-13.716 Y-22.999 E.01155 G3 X-15.026 Y-23.369 I-.219 J-1.732 E.04639 G2 X-16.009 Y-24.334 I-4.674 J3.775 E.0458 G1 X-16.336 Y-24.452 E.01155 G2 X-17.816 Y-23.904 I-.086 J2.038 E.05374 G2 X-20.073 Y-23.272 I-.436 J2.789 E.08018 G1 X-20.267 Y-23.369 E.00721 G2 X-21.25 Y-24.334 I-4.674 J3.775 E.0458 G1 X-21.578 Y-24.452 E.01155 G2 X-22.888 Y-24.082 I-.219 J1.732 E.04639 G3 X-23.871 Y-23.117 I-4.674 J-3.775 E.0458 G1 X-24.198 Y-22.999 E.01155 G3 X-25.509 Y-23.369 I-.219 J-1.732 E.04639 G2 X-26.491 Y-24.334 I-4.674 J3.775 E.0458 G1 X-26.819 Y-24.452 E.01155 G2 X-28.129 Y-24.082 I-.219 J1.732 E.04639 G3 X-29.112 Y-23.117 I-4.674 J-3.775 E.0458 G1 X-29.44 Y-22.999 E.01155 G3 X-30.75 Y-23.369 I-.219 J-1.732 E.04639 G2 X-31.733 Y-24.334 I-4.674 J3.775 E.0458 G1 X-32.06 Y-24.452 E.01155 G2 X-33.37 Y-24.082 I-.219 J1.732 E.04639 G3 X-34.15 Y-23.287 I-3.835 J-2.979 E.03702 G3 X-33.413 Y-21.816 I-2.168 J2.006 E.05531 G1 X-33.37 Y-21.831 E.0015 G3 X-32.06 Y-21.462 I.219 J1.732 E.04639 G2 X-31.077 Y-20.496 I4.674 J-3.775 E.0458 G1 X-30.75 Y-20.379 E.01155 G2 X-29.44 Y-20.748 I.219 J-1.732 E.04639 G3 X-28.457 Y-21.714 I4.674 J3.775 E.0458 G1 X-28.129 Y-21.831 E.01155 G3 X-26.819 Y-21.462 I.219 J1.732 E.04639 G2 X-25.836 Y-20.496 I4.674 J-3.775 E.0458 G1 X-25.509 Y-20.379 E.01155 G2 X-24.198 Y-20.748 I.219 J-1.732 E.04639 G3 X-23.215 Y-21.714 I4.674 J3.775 E.0458 G1 X-22.888 Y-21.831 E.01155 G3 X-21.578 Y-21.462 I.219 J1.732 E.04639 G2 X-20.907 Y-20.757 I3.386 J-2.554 E.03234 G2 X-20.132 Y-19.356 I3.011 J-.75 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-20.609 Y-19.955 G1 X-20.907 Y-20.757 G1 X-21.168 Y-21.031 ;WIPE_END G1 X-28.792 Y-20.67 Z1.4 F30000 G1 X-39.285 Y-20.171 Z1.4 G1 Z1 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.465136 G1 F12000 G1 X-39.333 Y-20.461 E.0101 ;WIDTH:0.441846 G3 X-39.356 Y-20.68 I3.321 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-20.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-21.682 I8.952 J-.421 E.02139 ;WIDTH:0.39914 G3 X-39.356 Y-21.896 I3.284 J.204 E.00624 ;WIDTH:0.439028 G1 X-39.337 Y-22.088 E.00622 ;WIDTH:0.475341 G3 X-39.285 Y-22.405 I4.887 J.63 E.01132 G1 X-38.241 Y-23.489 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-36.792 Y-24.182 I1.949 J2.213 E.05394 G2 X-37.301 Y-24.452 I-.622 J.558 E.01952 G2 X-38.612 Y-24.082 I-.219 J1.732 E.04639 G3 X-39.537 Y-23.165 I-4.436 J-3.549 E.04331 G1 X-39.537 Y-24.794 E.05401 G1 X-24.459 Y48.263 F30000 G1 F16200 G1 X-25.563 Y48.263 E.03662 G1 X-25.563 Y47.739 E.01739 G1 X-25.836 Y47.641 E.00962 G3 X-26.819 Y46.675 I3.691 J-4.74 E.0458 G2 X-28.129 Y46.306 I-1.092 J1.363 E.04639 G1 X-28.457 Y46.423 E.01155 G2 X-29.44 Y47.389 I3.691 J4.74 E.0458 G3 X-30.75 Y47.758 I-1.092 J-1.363 E.04639 G1 X-31.077 Y47.641 E.01155 G3 X-32.06 Y46.675 I3.691 J-4.74 E.0458 G2 X-33.37 Y46.306 I-1.092 J1.363 E.04639 G1 X-33.698 Y46.423 E.01155 G2 X-34.681 Y47.389 I3.691 J4.74 E.0458 G3 X-35.991 Y47.758 I-1.092 J-1.363 E.04639 G1 X-36.319 Y47.641 E.01155 G3 X-37.301 Y46.675 I3.691 J-4.74 E.0458 G2 X-38.612 Y46.306 I-1.092 J1.363 E.04639 G1 X-38.939 Y46.423 E.01155 G2 X-39.922 Y47.389 I3.691 J4.74 E.0458 G3 X-41.232 Y47.758 I-1.092 J-1.363 E.04639 G1 X-41.56 Y47.641 E.01155 G3 X-42.537 Y46.681 I3.667 J-4.712 E.04552 G1 X-42.537 Y48.928 E.07453 G1 X-42.215 Y49.044 E.01134 G3 X-41.232 Y50.009 I-3.691 J4.74 E.0458 G2 X-39.922 Y50.379 I1.092 J-1.363 E.04639 G1 X-39.595 Y50.261 E.01155 G2 X-38.612 Y49.296 I-3.691 J-4.74 E.0458 G3 X-37.301 Y48.926 I1.092 J1.363 E.04639 G1 X-36.974 Y49.044 E.01155 G3 X-35.991 Y50.009 I-3.691 J4.74 E.0458 G2 X-34.681 Y50.379 I1.092 J-1.363 E.04639 G1 X-34.353 Y50.261 E.01155 G2 X-33.37 Y49.296 I-3.691 J-4.74 E.0458 G3 X-32.06 Y48.926 I1.092 J1.363 E.04639 G1 X-31.733 Y49.044 E.01155 G3 X-30.75 Y50.009 I-3.692 J4.74 E.0458 G2 X-29.44 Y50.379 I1.092 J-1.363 E.04639 G1 X-29.112 Y50.261 E.01155 G2 X-28.129 Y49.296 I-3.691 J-4.74 E.0458 G3 X-26.819 Y48.926 I1.092 J1.363 E.04639 G1 X-26.491 Y49.044 E.01155 G3 X-25.509 Y50.009 I-3.691 J4.74 E.0458 G2 X-24.198 Y50.379 I1.092 J-1.363 E.04639 G1 X-23.871 Y50.261 E.01155 G2 X-22.888 Y49.296 I-3.691 J-4.74 E.0458 G3 X-21.578 Y48.926 I1.092 J1.363 E.04639 G1 X-21.25 Y49.044 E.01155 G3 X-20.267 Y50.009 I-3.691 J4.74 E.0458 G2 X-18.957 Y50.379 I1.092 J-1.363 E.04639 G1 X-18.629 Y50.261 E.01155 G2 X-17.647 Y49.296 I-3.691 J-4.74 E.0458 G3 X-16.336 Y48.926 I1.092 J1.363 E.04639 G1 X-16.009 Y49.044 E.01155 G3 X-15.026 Y50.009 I-3.691 J4.74 E.0458 G2 X-13.716 Y50.379 I1.092 J-1.363 E.04639 G1 X-13.388 Y50.261 E.01155 G2 X-12.405 Y49.296 I-3.691 J-4.74 E.0458 G3 X-11.095 Y48.926 I1.092 J1.363 E.04639 G1 X-10.767 Y49.044 E.01155 G3 X-9.785 Y50.009 I-3.691 J4.74 E.0458 G2 X-8.474 Y50.379 I1.092 J-1.363 E.04639 G1 X-8.147 Y50.261 E.01155 G2 X-7.164 Y49.296 I-3.691 J-4.74 E.0458 G3 X-5.854 Y48.926 I1.092 J1.363 E.04639 G1 X-5.526 Y49.044 E.01155 G3 X-4.543 Y50.009 I-3.691 J4.74 E.0458 G2 X-3.233 Y50.379 I1.092 J-1.363 E.04639 G1 X-2.905 Y50.261 E.01155 G2 X-1.923 Y49.296 I-3.691 J-4.74 E.0458 G3 X-.612 Y48.926 I1.092 J1.363 E.04639 G1 X-.285 Y49.044 E.01155 G3 X.698 Y50.009 I-3.692 J4.74 E.0458 G2 X2.008 Y50.379 I1.092 J-1.363 E.04639 G1 X2.336 Y50.261 E.01155 G2 X3.319 Y49.296 I-3.691 J-4.74 E.0458 G3 X4.629 Y48.926 I1.092 J1.363 E.04639 G1 X4.957 Y49.044 E.01155 G3 X5.939 Y50.009 I-3.691 J4.74 E.0458 G2 X7.25 Y50.379 I1.092 J-1.363 E.04639 G1 X7.577 Y50.261 E.01155 G2 X8.56 Y49.296 I-3.691 J-4.74 E.0458 G3 X9.87 Y48.926 I1.092 J1.363 E.04639 G1 X10.198 Y49.044 E.01155 G3 X11.181 Y50.009 I-3.691 J4.74 E.0458 G2 X12.491 Y50.379 I1.092 J-1.363 E.04639 G1 X12.819 Y50.261 E.01155 G2 X13.801 Y49.296 I-3.692 J-4.74 E.0458 G3 X15.112 Y48.926 I1.092 J1.363 E.04639 G1 X15.439 Y49.044 E.01155 G3 X16.422 Y50.009 I-3.691 J4.74 E.0458 G2 X17.732 Y50.379 I1.092 J-1.363 E.04639 G1 X18.06 Y50.261 E.01155 G2 X19.043 Y49.296 I-3.691 J-4.74 E.0458 G3 X20.353 Y48.926 I1.092 J1.363 E.04639 G1 X20.68 Y49.044 E.01155 G3 X21.663 Y50.009 I-3.691 J4.74 E.0458 G1 X21.937 Y50.146 E.01015 G1 X21.937 Y47.741 E.07979 G3 X21.336 Y47.641 I-.185 J-.745 E.02079 G3 X20.353 Y46.675 I3.691 J-4.74 E.0458 G2 X19.043 Y46.306 I-1.092 J1.363 E.04639 G1 X18.715 Y46.423 E.01155 G2 X17.732 Y47.389 I3.691 J4.74 E.0458 G3 X16.422 Y47.758 I-1.092 J-1.363 E.04639 G1 X16.094 Y47.641 E.01155 G3 X15.112 Y46.675 I3.691 J-4.74 E.0458 G2 X13.801 Y46.306 I-1.092 J1.363 E.04639 G1 X13.474 Y46.423 E.01155 G2 X12.491 Y47.389 I3.691 J4.74 E.0458 G3 X11.181 Y47.758 I-1.092 J-1.363 E.04639 G1 X10.853 Y47.641 E.01155 G3 X9.87 Y46.675 I3.691 J-4.74 E.0458 G2 X8.56 Y46.306 I-1.092 J1.363 E.04639 G1 X8.232 Y46.423 E.01155 G2 X7.25 Y47.389 I3.691 J4.74 E.0458 G3 X5.939 Y47.758 I-1.092 J-1.363 E.04639 G3 X4.963 Y47.028 I.703 J-1.957 E.04105 G1 X4.963 Y48.263 E.04098 G1 X4.57 Y48.263 E.01303 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X4.963 Y48.263 G1 X4.963 Y47.028 G1 X5.233 Y47.283 ;WIPE_END G1 X.951 Y40.965 Z1.4 F30000 G1 X-42.652 Y-23.367 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:1.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.6 I-.258 J1.189 P1 F30000 G1 X49.418 Y-1.642 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.01968 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.379 Y-1.634 E.00174 G1 X49.503 Y-1.215 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.01557 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.469 Y-1.195 E.01471 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.168 Y-.572 ;WIPE_END G1 X50.42 Y-2.111 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50 Y-2.152 I-.419 J2.105 E.43341 G1 X50.38 Y-2.114 E.01267 G1 X50.48 Y-2.542 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00078 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.0156 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.0156 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.0156 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.44 Y-2.546 E.01359 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.092 Y-1.512 ;WIPE_END G1 X44.5 Y-.73 Z1.6 F30000 G1 X28.159 Y.954 Z1.6 G1 Z1.2 G1 E.8 F1800 M73 P22 R62 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.119 Y1.026 E.00252 G3 X25.566 Y-2.091 I-1.929 J-1.024 E.26399 G3 X26.119 Y-2.181 I.651 J2.252 E.01726 G3 X28.281 Y.631 I.072 J2.183 E.12725 G1 X28.173 Y.917 E.00937 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.119 Y1.026 G1 X28.017 Y1.214 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.674 Y2.129 ;WIPE_END G1 X19.22 Y.486 Z1.6 F30000 G1 X7.71 Y-2.052 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.147 J2.165 E.33451 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.267 J2.029 E.2488 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.559 Y4.263 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.559 Y4.259 E.00014 G3 X9.084 Y3.912 I1.132 J1.144 E.01945 G3 X9.619 Y3.795 I.632 J1.605 E.01692 G3 X8.419 Y4.417 I.071 J1.608 E.26781 G1 X8.532 Y4.293 E.00517 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.559 Y4.259 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.619 Y3.795 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.316 Y3.912 G1 X10.372 Y3.94 ;WIPE_END G1 X3.164 Y6.45 Z1.6 F30000 G1 X-16.248 Y13.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.151 J-2.165 E.33495 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.27 J-2.028 E.24846 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.461 Y8.975 Z1.6 F30000 G1 X-29.159 Y6.536 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.166 Y6.534 E.00024 G3 X-30.916 Y3.912 I-1.143 J-1.132 E.17523 G3 X-30.381 Y3.795 I.632 J1.605 E.01692 G3 X-29.029 Y6.375 I.071 J1.607 E.11196 G1 X-29.134 Y6.505 E.00513 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.166 Y6.534 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.971 Y6.861 ;WIPE_END G1 X-33.018 Y-.492 Z1.6 F30000 G1 X-38.964 Y-21.853 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.94 Y-21.995 E.00478 G3 X-38.23 Y-23.218 I2.632 J.71 E.04744 G3 X-36.489 Y-24.005 I1.911 J1.908 E.06478 G3 X-39.01 Y-21.645 I.181 J2.72 E.44415 G1 X-38.973 Y-21.814 E.00575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.565 Y-21.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.547 Y-21.89 E.0039 G3 X-37.713 Y-23.13 I2.239 J.605 E.05045 G3 X-36.462 Y-23.599 I1.424 J1.895 E.04492 G3 X-38.607 Y-21.592 I.154 J2.314 E.37787 G1 X-38.574 Y-21.735 E.00487 G1 X-38.139 Y-21.689 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.127 Y-21.778 E.00274 G3 X-37.243 Y-22.921 I1.818 J.492 E.04557 G3 X-36.434 Y-23.165 I.919 J1.584 E.02619 G3 X-38.175 Y-21.535 I.125 J1.879 E.28425 G1 X-38.148 Y-21.65 E.00364 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.127 Y-21.778 G1 X-38.042 Y-22.01 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-36.885 Y-23.076 ;WIPE_END G1 X-35.36 Y-30.555 Z1.6 F30000 G1 X-33.802 Y-38.195 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.943 Y-37.928 E.01003 G3 X-38.23 Y-41.218 I-2.364 J-1.357 E.30825 G3 X-36.489 Y-42.005 I1.911 J1.909 E.06478 G3 X-33.787 Y-38.247 I.181 J2.72 E.18339 G1 X-33.791 Y-38.233 E.00048 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.168 Y-38.375 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.297 Y-38.132 E.00914 G3 X-37.713 Y-41.13 I-2.011 J-1.154 E.27232 G3 X-36.462 Y-41.599 I1.424 J1.895 E.04492 G3 X-34.16 Y-38.414 I.154 J2.313 E.15557 G1 X-34.568 Y-38.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-37.243 Y-40.921 I-1.741 J-.716 E.22001 G3 X-36.434 Y-41.165 I.919 J1.584 E.02619 G3 X-34.553 Y-38.608 I.125 J1.878 E.11605 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.667 Y-38.345 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.042 Y-37.421 ;WIPE_END G1 X-28.573 Y-38.992 Z1.6 F30000 G1 X-20.277 Y-40.737 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.243 Y-40.779 E.00181 G3 X-19.64 Y-41.338 I1.944 J1.494 E.0274 G3 X-18.436 Y-41.734 I1.341 J2.053 E.04254 G3 X-20.422 Y-40.513 I.137 J2.448 E.43043 G1 X-20.299 Y-40.703 E.0075 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.511 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.926 Y-40.536 E.00094 G3 X-19.323 Y-41.06 I1.617 J1.25 E.02668 G3 X-18.409 Y-41.327 I1 J1.725 E.03189 G3 X-20.076 Y-40.313 I.1 J2.042 E.35857 G1 X-19.962 Y-40.478 E.00664 G1 X-19.581 Y-40.271 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-18.916 Y-40.776 I1.272 J.985 E.02595 G3 X-18.381 Y-40.893 I.632 J1.606 E.01692 G3 X-19.605 Y-40.239 I.071 J1.607 E.26646 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.381 Y-40.893 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.821 Y-40.823 ;WIPE_END G1 X-17.068 Y-33.227 Z1.6 F30000 G1 X-15.955 Y-21.999 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.94 Y-21.92 E.00266 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35156 G3 X-18.436 Y-23.734 I1.505 J2.003 E.04869 G3 X-16.043 Y-22.223 I.128 J2.448 E.10006 G1 X-15.97 Y-22.036 E.00665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.341 Y-21.868 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.334 Y-21.815 E.00179 G3 X-19.323 Y-23.06 I-1.974 J.529 E.30206 G3 X-18.409 Y-23.327 I1 J1.725 E.03189 G3 X-16.42 Y-22.067 I.1 J2.042 E.08325 G1 X-16.355 Y-21.905 E.00576 G1 X-16.752 Y-21.729 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.755 Y-21.702 E.00082 G3 X-18.916 Y-22.776 I-1.554 J.416 E.22672 G3 X-18.381 Y-22.893 I.632 J1.605 E.01692 G3 X-16.823 Y-21.9 I.071 J1.607 E.06048 G1 X-16.768 Y-21.766 E.00447 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.755 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.358 Y-19.994 ;WIPE_END G1 X-20.748 Y-13.156 Z1.6 F30000 G1 X-42.748 Y31.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z1.6 F30000 G1 X-42.748 Y51.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z1.6 F30000 G1 X4.752 Y47.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z1.6 F30000 G1 X4.752 Y33.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z1.6 F30000 G1 X27.252 Y31.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z1.6 F30000 G1 X-28.09 Y-52.948 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.945 E.32007 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32013 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z1.6 F30000 G1 X7.055 Y-53.79 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z1.6 F30000 G1 X-40.155 Y-5.355 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.489 Y60.114 I-1.446 J1.445 E.19893 G1 X22.649 Y60.355 E.00961 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.444 J1.451 E.19522 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.301 Y-2.777 Z1.6 F30000 G1 X-48.77 Y-.926 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.733 Y-1.033 E.00348 G3 X-47.434 Y-2.091 I1.923 J1.035 E.05282 G3 X-46.881 Y-2.181 I.651 J2.252 E.01726 G3 X-48.898 Y-.636 I.072 J2.183 E.33831 G1 X-48.786 Y-.89 E.0085 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.733 Y-1.033 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.306 Y-2.123 ;WIPE_END G1 X-47.169 Y5.508 Z1.6 F30000 G1 X-46.193 Y59.807 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.201 Y59.809 E.00024 G3 X-45.416 Y57.512 I1.391 J-.807 E.08449 G3 X-44.881 Y57.395 I.632 J1.605 E.01692 G3 X-46.083 Y59.984 I.071 J1.607 E.20261 G1 X-46.172 Y59.841 E.00518 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.201 Y59.809 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.038 Y57.974 ;WIPE_END G1 X-38.408 Y58.178 Z1.6 F30000 G1 X22.807 Y59.807 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.799 Y59.809 E.00024 G3 X23.584 Y57.512 I1.392 J-.807 E.0845 G3 X24.119 Y57.395 I.632 J1.605 E.01692 G3 X22.917 Y59.985 I.071 J1.607 E.20264 G1 X22.828 Y59.841 E.00518 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.799 Y59.809 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.962 Y57.975 ;WIPE_END G1 X17.574 Y52.569 Z1.6 F30000 G1 X-40.59 Y-5.79 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-45.913 Y-3.114 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-47.523 Y-3.154 I-.896 J3.584 E.05386 G1 X-47.784 Y-3.341 E.01064 G1 X-48.537 Y-3.389 E.02502 G1 X-48.537 Y-4.737 E.04473 G1 X-48.257 Y-4.737 E.00929 G1 X-49.135 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409516 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385478 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342223 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305489 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275113 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276405 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307219 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344558 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.393962 G2 X-49.135 Y1.264 I8.169 J-1.357 E.0117 G1 X-47.517 Y3.156 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-45.819 Y3.14 I.783 J-6.865 E.05648 G1 X-45.163 Y3.062 E.02189 G1 X-44.508 Y2.592 E.02674 G3 X-42.543 Y1.9 I1.521 J1.184 E.07303 G1 X-41.888 Y2.37 E.02674 G2 X-39.922 Y3.062 I1.521 J-1.184 E.07303 G1 X-39.267 Y2.592 E.02674 G3 X-37.301 Y1.9 I1.521 J1.184 E.07303 G1 X-36.646 Y2.37 E.02674 G2 X-34.681 Y3.062 I1.521 J-1.184 E.07303 G1 X-34.026 Y2.592 E.02674 G3 X-32.06 Y1.9 I1.521 J1.184 E.07303 G3 X-30.898 Y2.807 I-4.489 J6.956 E.04897 G2 X-32.787 Y4.451 I.606 J2.604 E.08649 G1 X-33.37 Y4.521 E.01949 G1 X-34.026 Y4.99 E.02674 G3 X-35.991 Y5.682 I-1.521 J-1.184 E.07303 G1 X-36.646 Y5.213 E.02674 G2 X-38.612 Y4.521 I-1.521 J1.184 E.07303 G1 X-39.267 Y4.99 E.02674 G3 X-41.232 Y5.682 I-1.521 J-1.184 E.07303 G1 X-41.888 Y5.213 E.02674 G2 X-43.853 Y4.521 I-1.521 J1.184 E.07303 G1 X-44.508 Y4.99 E.02674 G3 X-46.474 Y5.682 I-1.521 J-1.184 E.07303 G3 X-47.784 Y4.649 I5.127 J-7.846 E.05544 G1 X-48.537 Y4.454 E.02579 G1 X-48.537 Y7.094 E.08756 G1 X-47.784 Y7.141 E.02502 G1 X-47.129 Y7.611 E.02674 G2 X-45.163 Y8.303 I1.521 J-1.184 E.07303 G1 X-44.508 Y7.833 E.02674 G3 X-42.543 Y7.141 I1.521 J1.184 E.07303 G1 X-41.888 Y7.611 E.02674 G2 X-39.922 Y8.303 I1.521 J-1.184 E.07303 G1 X-39.267 Y7.833 E.02674 G3 X-37.301 Y7.141 I1.521 J1.184 E.07303 G1 X-36.646 Y7.611 E.02674 G2 X-34.681 Y8.303 I1.521 J-1.184 E.07303 G2 X-33.37 Y7.269 I-5.127 J-7.846 E.05544 G1 X-32.715 Y7.063 E.02278 G1 X-32.34 Y7.108 E.01253 G2 X-30.99 Y7.975 I2.084 J-1.76 E.05403 G2 X-29.44 Y8.303 I1.046 J-1.117 E.05526 G1 X-29.363 Y8.248 E.00312 G1 X-29.363 Y10.73 E.08232 G3 X-30.75 Y10.924 I-.943 J-1.689 E.04753 G1 X-31.405 Y10.454 E.02674 G2 X-33.37 Y9.762 I-1.521 J1.184 E.07303 G1 X-34.026 Y10.232 E.02674 G3 X-35.991 Y10.924 I-1.521 J-1.184 E.07303 G1 X-36.646 Y10.454 E.02674 G2 X-38.612 Y9.762 I-1.521 J1.184 E.07303 G1 X-39.267 Y10.232 E.02674 G3 X-41.232 Y10.924 I-1.521 J-1.184 E.07303 G1 X-41.888 Y10.454 E.02674 G2 X-43.853 Y9.762 I-1.521 J1.184 E.07303 G1 X-44.508 Y10.232 E.02674 G3 X-46.474 Y10.924 I-1.521 J-1.184 E.07303 G3 X-47.784 Y9.89 I5.127 J-7.846 E.05544 G1 X-48.537 Y9.696 E.02579 G1 X-48.537 Y11.324 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-48.537 Y9.696 G1 X-48.177 Y9.789 ;WIPE_END G1 X-45.36 Y16.882 Z1.6 F30000 G1 X-42.537 Y23.991 Z1.6 G1 Z1.2 G1 E.8 F1800 G1 F16200 G1 X-42.537 Y25.619 E.05401 G1 X-41.888 Y26.178 E.02842 G2 X-39.922 Y26.52 I1.209 J-1.133 E.07101 G1 X-39.267 Y25.955 E.02868 G3 X-37.301 Y25.614 I1.209 J1.133 E.07101 G1 X-36.646 Y26.178 E.02868 G2 X-34.681 Y26.52 I1.209 J-1.133 E.07101 G1 X-34.026 Y25.955 E.02868 G3 X-32.06 Y25.614 I1.209 J1.133 E.07101 G1 X-31.405 Y26.178 E.02868 G2 X-29.44 Y26.52 I1.209 J-1.133 E.07101 G1 X-28.784 Y25.955 E.02868 G3 X-26.819 Y25.614 I1.209 J1.133 E.07101 G2 X-25.563 Y26.608 I6.191 J-6.526 E.05321 G1 X-25.563 Y29.093 E.08243 G1 X-26.164 Y28.576 E.02629 G2 X-28.129 Y28.234 I-1.209 J1.133 E.07101 G1 X-28.784 Y28.799 E.02868 G3 X-30.75 Y29.14 I-1.209 J-1.133 E.07101 G1 X-31.405 Y28.576 E.02868 G2 X-33.37 Y28.234 I-1.209 J1.133 E.07101 G1 X-34.026 Y28.799 E.02868 G3 X-35.991 Y29.14 I-1.209 J-1.133 E.07101 G1 X-36.646 Y28.576 E.02868 G2 X-38.612 Y28.234 I-1.209 J1.133 E.07101 G1 X-39.267 Y28.799 E.02868 G3 X-41.232 Y29.14 I-1.209 J-1.133 E.07101 G2 X-42.537 Y28.111 I-6.41 J6.781 E.0552 G1 X-42.537 Y30.86 E.0912 G1 X-41.888 Y31.419 E.02842 G2 X-39.922 Y31.761 I1.209 J-1.133 E.07101 G1 X-39.267 Y31.197 E.02868 G3 X-37.301 Y30.855 I1.209 J1.133 E.07101 G1 X-36.646 Y31.419 E.02868 G2 X-34.681 Y31.761 I1.209 J-1.133 E.07101 G1 X-34.026 Y31.197 E.02868 G3 X-32.06 Y30.855 I1.209 J1.133 E.07101 G1 X-31.405 Y31.419 E.02868 G2 X-29.44 Y31.761 I1.209 J-1.133 E.07101 G1 X-28.784 Y31.197 E.02868 G3 X-26.819 Y30.855 I1.209 J1.133 E.07101 G2 X-25.563 Y31.85 I6.191 J-6.526 E.05321 G1 X-25.563 Y30.221 E.05401 G1 X-25.563 Y37.948 F30000 G1 F16200 G1 X-25.563 Y39.576 E.05401 G1 X-26.164 Y39.059 E.02629 G2 X-28.129 Y38.717 I-1.209 J1.133 E.07101 G1 X-28.784 Y39.281 E.02868 G3 X-30.75 Y39.623 I-1.209 J-1.133 E.07101 G1 X-31.405 Y39.059 E.02868 G2 X-33.37 Y38.717 I-1.209 J1.133 E.07101 G1 X-34.026 Y39.281 E.02868 G3 X-35.991 Y39.623 I-1.209 J-1.133 E.07101 G1 X-36.646 Y39.059 E.02868 G2 X-38.612 Y38.717 I-1.209 J1.133 E.07101 G1 X-39.267 Y39.281 E.02868 G3 X-41.232 Y39.623 I-1.209 J-1.133 E.07101 G2 X-42.537 Y38.593 I-6.41 J6.781 E.0552 G1 X-42.537 Y41.343 E.0912 G1 X-41.888 Y41.902 E.02842 G2 X-39.922 Y42.244 I1.209 J-1.133 E.07101 G1 X-39.267 Y41.679 E.02868 G3 X-37.301 Y41.338 I1.209 J1.133 E.07101 G1 X-36.646 Y41.902 E.02868 G2 X-34.681 Y42.244 I1.209 J-1.133 E.07101 G1 X-34.026 Y41.679 E.02868 G3 X-32.06 Y41.338 I1.209 J1.133 E.07101 G1 X-31.405 Y41.902 E.02868 G2 X-29.44 Y42.244 I1.209 J-1.133 E.07101 G1 X-28.784 Y41.679 E.02868 G3 X-26.819 Y41.338 I1.209 J1.133 E.07101 G2 X-25.563 Y42.332 I6.191 J-6.526 E.05321 G1 X-25.563 Y44.817 E.08243 G1 X-26.164 Y44.3 E.02629 G2 X-28.129 Y43.958 I-1.209 J1.133 E.07101 G1 X-28.784 Y44.523 E.02868 G3 X-30.75 Y44.864 I-1.209 J-1.133 E.07101 G1 X-31.405 Y44.3 E.02868 G2 X-33.37 Y43.958 I-1.209 J1.133 E.07101 G1 X-34.026 Y44.523 E.02868 G3 X-35.991 Y44.864 I-1.209 J-1.133 E.07101 G1 X-36.646 Y44.3 E.02868 G2 X-38.612 Y43.958 I-1.209 J1.133 E.07101 G1 X-39.267 Y44.523 E.02868 G3 X-41.232 Y44.864 I-1.209 J-1.133 E.07101 G2 X-42.537 Y43.835 I-6.41 J6.781 E.0552 G1 X-42.537 Y45.463 E.05401 G1 X-40.303 Y59.737 F30000 G1 F16200 G1 X-38.675 Y59.737 E.05401 G3 X-37.301 Y59.554 I.931 J1.747 E.04696 G1 X-37.047 Y59.737 E.01039 G1 X-33.434 Y59.737 E.11985 G3 X-32.06 Y59.554 I.931 J1.747 E.04696 G1 X-31.806 Y59.737 E.01039 G1 X-28.193 Y59.737 E.11985 G3 X-26.819 Y59.554 I.931 J1.747 E.04696 G1 X-26.564 Y59.737 E.01039 G1 X-22.951 Y59.737 E.11985 G3 X-21.578 Y59.554 I.931 J1.747 E.04696 M73 P23 R62 G1 X-21.323 Y59.737 E.01039 G1 X-17.71 Y59.737 E.11985 G3 X-16.336 Y59.554 I.931 J1.747 E.04696 G1 X-16.082 Y59.737 E.01039 G1 X-12.469 Y59.737 E.11985 G3 X-11.095 Y59.554 I.931 J1.747 E.04696 G1 X-10.84 Y59.737 E.01039 G1 X-7.227 Y59.737 E.11985 G3 X-5.854 Y59.554 I.931 J1.747 E.04696 G1 X-5.599 Y59.737 E.01039 G1 X-1.986 Y59.737 E.11985 G3 X-.612 Y59.554 I.931 J1.747 E.04696 G1 X-.358 Y59.737 E.01039 G1 X3.255 Y59.737 E.11985 G3 X4.629 Y59.554 I.931 J1.747 E.04696 G1 X4.884 Y59.737 E.01039 G1 X8.497 Y59.737 E.11985 G3 X9.87 Y59.554 I.931 J1.747 E.04696 G1 X10.125 Y59.737 E.01039 G1 X13.738 Y59.737 E.11985 G3 X15.112 Y59.554 I.931 J1.747 E.04696 G1 X15.366 Y59.737 E.01039 G1 X18.979 Y59.737 E.11985 G3 X20.353 Y59.554 I.931 J1.747 E.04696 G1 X20.608 Y59.737 E.01039 G1 X21.641 Y59.737 E.03428 G3 X21.697 Y58.099 I3.019 J-.717 E.055 G1 X21.008 Y57.626 E.02772 G2 X19.043 Y56.934 I-1.521 J1.184 E.07303 G1 X18.387 Y57.403 E.02674 G3 X16.422 Y58.095 I-1.521 J-1.184 E.07303 G1 X15.767 Y57.626 E.02674 G2 X13.801 Y56.934 I-1.521 J1.184 E.07303 G1 X13.146 Y57.403 E.02674 G3 X11.181 Y58.095 I-1.521 J-1.184 E.07303 G1 X10.525 Y57.626 E.02674 G2 X8.56 Y56.934 I-1.521 J1.184 E.07303 G1 X7.905 Y57.403 E.02674 G3 X5.939 Y58.095 I-1.521 J-1.184 E.07303 G1 X5.284 Y57.626 E.02674 G2 X3.319 Y56.934 I-1.521 J1.184 E.07303 G1 X2.663 Y57.403 E.02674 G3 X.698 Y58.095 I-1.521 J-1.184 E.07303 G1 X.043 Y57.626 E.02674 G2 X-1.923 Y56.934 I-1.521 J1.184 E.07303 G1 X-2.578 Y57.403 E.02674 G3 X-4.543 Y58.095 I-1.521 J-1.184 E.07303 G1 X-5.198 Y57.626 E.02674 G2 X-7.164 Y56.934 I-1.521 J1.184 E.07303 G1 X-7.819 Y57.403 E.02674 G3 X-9.785 Y58.095 I-1.521 J-1.184 E.07303 G1 X-10.44 Y57.626 E.02674 G2 X-12.405 Y56.934 I-1.521 J1.184 E.07303 G1 X-13.06 Y57.403 E.02674 G3 X-15.026 Y58.095 I-1.521 J-1.184 E.07303 G1 X-15.681 Y57.626 E.02674 G2 X-17.647 Y56.934 I-1.521 J1.184 E.07303 G1 X-18.302 Y57.403 E.02674 G3 X-20.267 Y58.095 I-1.521 J-1.184 E.07303 G1 X-20.922 Y57.626 E.02674 G2 X-22.888 Y56.934 I-1.521 J1.184 E.07303 G1 X-23.543 Y57.403 E.02674 G3 X-25.509 Y58.095 I-1.521 J-1.184 E.07303 G1 X-26.164 Y57.626 E.02674 G2 X-28.129 Y56.934 I-1.521 J1.184 E.07303 G1 X-28.784 Y57.403 E.02674 G3 X-30.75 Y58.095 I-1.521 J-1.184 E.07303 G1 X-31.405 Y57.626 E.02674 G2 X-33.37 Y56.934 I-1.521 J1.184 E.07303 G1 X-34.026 Y57.403 E.02674 G3 X-35.991 Y58.095 I-1.521 J-1.184 E.07303 G1 X-36.646 Y57.626 E.02674 G2 X-38.612 Y56.934 I-1.521 J1.184 E.07303 G1 X-39.267 Y57.403 E.02674 G3 X-41.232 Y58.095 I-1.521 J-1.184 E.07303 G3 X-42.543 Y57.062 I5.127 J-7.846 E.05544 G1 X-43.198 Y56.856 E.02278 G2 X-44.733 Y56.339 I-1.832 J2.901 E.05426 G1 X-48.537 Y57.879 F30000 G1 F16200 G1 X-48.537 Y59.507 E.05401 G1 X-47.784 Y59.554 E.02502 G2 X-47.359 Y59.737 I.34 J-.205 E.01638 G3 X-47.129 Y57.626 I2.951 J-.746 E.07195 G1 X-47.784 Y57.062 E.02868 G1 X-48.537 Y56.867 E.02579 G1 X-48.537 Y54.266 E.0863 G1 X-47.784 Y54.313 E.02502 G3 X-46.474 Y55.347 I-5.127 J7.846 E.05544 G2 X-44.508 Y55.005 I.756 J-1.475 E.07101 G1 X-43.853 Y54.441 E.02868 G3 X-41.888 Y54.783 I.756 J1.475 E.07101 G1 X-41.232 Y55.347 E.02868 G2 X-39.267 Y55.005 I.756 J-1.475 E.07101 G1 X-38.612 Y54.441 E.02868 G3 X-36.646 Y54.783 I.756 J1.475 E.07101 G1 X-35.991 Y55.347 E.02868 G2 X-34.026 Y55.005 I.756 J-1.475 E.07101 G1 X-33.37 Y54.441 E.02868 G3 X-31.405 Y54.783 I.756 J1.475 E.07101 G1 X-30.75 Y55.347 E.02868 G2 X-28.784 Y55.005 I.756 J-1.475 E.07101 G1 X-28.129 Y54.441 E.02868 G3 X-26.164 Y54.783 I.756 J1.475 E.07101 G1 X-25.509 Y55.347 E.02868 G2 X-23.543 Y55.005 I.756 J-1.475 E.07101 G1 X-22.888 Y54.441 E.02868 G3 X-20.922 Y54.783 I.756 J1.475 E.07101 G1 X-20.267 Y55.347 E.02868 G2 X-18.302 Y55.005 I.756 J-1.475 E.07101 G1 X-17.647 Y54.441 E.02868 G3 X-15.681 Y54.783 I.756 J1.475 E.07101 G1 X-15.026 Y55.347 E.02868 G2 X-13.06 Y55.005 I.756 J-1.475 E.07101 G1 X-12.405 Y54.441 E.02868 G3 X-10.44 Y54.783 I.756 J1.475 E.07101 G1 X-9.785 Y55.347 E.02868 G2 X-7.819 Y55.005 I.756 J-1.475 E.07101 G1 X-7.164 Y54.441 E.02868 G3 X-5.198 Y54.783 I.756 J1.475 E.07101 G1 X-4.543 Y55.347 E.02868 G2 X-2.578 Y55.005 I.756 J-1.475 E.07101 G1 X-1.923 Y54.441 E.02868 G3 X.043 Y54.783 I.756 J1.475 E.07101 G1 X.698 Y55.347 E.02868 G2 X2.663 Y55.005 I.756 J-1.475 E.07101 G1 X3.319 Y54.441 E.02868 G3 X5.284 Y54.783 I.756 J1.475 E.07101 G1 X5.939 Y55.347 E.02868 G2 X7.905 Y55.005 I.756 J-1.475 E.07101 G1 X8.56 Y54.441 E.02868 G3 X10.525 Y54.783 I.756 J1.475 E.07101 G1 X11.181 Y55.347 E.02868 G2 X13.146 Y55.005 I.756 J-1.475 E.07101 G1 X13.801 Y54.441 E.02868 G3 X15.767 Y54.783 I.756 J1.475 E.07101 G1 X16.422 Y55.347 E.02868 G2 X18.387 Y55.005 I.756 J-1.475 E.07101 G1 X19.043 Y54.441 E.02868 G3 X21.008 Y54.783 I.756 J1.475 E.07101 G1 X21.663 Y55.347 E.02868 G2 X23.629 Y55.005 I.756 J-1.475 E.07101 G1 X24.284 Y54.441 E.02868 G3 X26.249 Y54.783 I.756 J1.475 E.07101 G1 X26.905 Y55.347 E.02868 G1 X27.56 Y55.553 E.02278 G1 X27.937 Y55.508 E.0126 G1 X27.937 Y58.055 E.08449 G1 X27.56 Y58.173 E.01312 G1 X26.905 Y58.095 E.02189 G3 X26.315 Y57.377 I1.015 J-1.434 E.0312 G2 X25.546 Y56.7 I-2.319 J1.858 E.03415 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X26.085 Y57.115 G1 X26.315 Y57.377 G1 X26.619 Y57.891 G1 X26.905 Y58.095 G1 X26.927 Y58.098 ;WIPE_END G1 X23.893 Y51.095 Z1.6 F30000 G1 X21.937 Y46.579 Z1.6 G1 Z1.2 G1 E.8 F1800 G1 F16200 G1 X21.937 Y44.95 E.05401 G1 X21.663 Y44.864 E.00952 G1 X21.008 Y44.3 E.02868 G2 X19.043 Y43.958 I-1.209 J1.133 E.07101 G1 X18.387 Y44.523 E.02868 G3 X16.422 Y44.864 I-1.209 J-1.133 E.07101 G1 X15.767 Y44.3 E.02868 G2 X13.801 Y43.958 I-1.209 J1.133 E.07101 G1 X13.146 Y44.523 E.02868 G3 X11.181 Y44.864 I-1.209 J-1.133 E.07101 G1 X10.525 Y44.3 E.02868 G2 X8.56 Y43.958 I-1.209 J1.133 E.07101 G1 X7.905 Y44.523 E.02868 G3 X5.939 Y44.864 I-1.209 J-1.133 E.07101 G2 X4.963 Y44.07 I-4.931 J5.063 E.0418 G1 X4.963 Y41.626 E.08109 G1 X5.284 Y41.902 E.01405 G2 X7.25 Y42.244 I1.209 J-1.133 E.07101 G1 X7.905 Y41.679 E.02868 G3 X9.87 Y41.338 I1.209 J1.133 E.07101 G1 X10.525 Y41.902 E.02868 G2 X12.491 Y42.244 I1.209 J-1.133 E.07101 G1 X13.146 Y41.679 E.02868 G3 X15.112 Y41.338 I1.209 J1.133 E.07101 G1 X15.767 Y41.902 E.02868 G2 X17.732 Y42.244 I1.209 J-1.133 E.07101 G1 X18.387 Y41.679 E.02868 G3 X20.353 Y41.338 I1.209 J1.133 E.07101 G2 X21.663 Y42.371 I6.437 J-6.812 E.05544 G1 X21.937 Y42.404 E.00914 G1 X21.937 Y39.709 E.0894 G1 X21.663 Y39.623 E.00952 G1 X21.008 Y39.059 E.02868 G2 X19.043 Y38.717 I-1.209 J1.133 E.07101 G1 X18.387 Y39.281 E.02868 G3 X16.422 Y39.623 I-1.209 J-1.133 E.07101 G1 X15.767 Y39.059 E.02868 G2 X13.801 Y38.717 I-1.209 J1.133 E.07101 G1 X13.146 Y39.281 E.02868 G3 X11.181 Y39.623 I-1.209 J-1.133 E.07101 G1 X10.525 Y39.059 E.02868 G2 X8.56 Y38.717 I-1.209 J1.133 E.07101 G1 X7.905 Y39.281 E.02868 G3 X5.939 Y39.623 I-1.209 J-1.133 E.07101 G2 X4.963 Y38.829 I-4.931 J5.063 E.0418 G1 X4.963 Y37.737 E.03622 G1 X4.427 Y37.737 E.0178 G1 X3.98 Y34.263 F30000 G1 F16200 G1 X2.352 Y34.263 E.05401 G1 X2.008 Y34.51 E.01403 G3 X.698 Y34.382 I-.513 J-1.519 E.045 G1 X.56 Y34.263 E.00602 G1 X-2.889 Y34.263 E.11443 G1 X-3.233 Y34.51 E.01403 G3 X-4.543 Y34.382 I-.513 J-1.519 E.045 G1 X-4.681 Y34.263 E.00602 G1 X-8.13 Y34.263 E.11443 G1 X-8.474 Y34.51 E.01403 G3 X-9.785 Y34.382 I-.513 J-1.519 E.045 G1 X-9.922 Y34.263 E.00602 G1 X-13.372 Y34.263 E.11443 G1 X-13.716 Y34.51 E.01403 G3 X-15.026 Y34.382 I-.513 J-1.519 E.045 G1 X-15.164 Y34.263 E.00602 G1 X-18.613 Y34.263 E.11443 G1 X-18.957 Y34.51 E.01403 G3 X-20.267 Y34.382 I-.513 J-1.519 E.045 G1 X-20.405 Y34.263 E.00602 G1 X-23.854 Y34.263 E.11443 G1 X-24.198 Y34.51 E.01403 G3 X-25.509 Y34.382 I-.513 J-1.519 E.045 G1 X-26.164 Y33.817 E.02868 G2 X-28.129 Y33.476 I-1.209 J1.133 E.07101 G1 X-28.784 Y34.04 E.02868 G3 X-30.75 Y34.382 I-1.209 J-1.133 E.07101 G1 X-31.405 Y33.817 E.02868 G2 X-33.37 Y33.476 I-1.209 J1.133 E.07101 G1 X-34.026 Y34.04 E.02868 G3 X-35.991 Y34.382 I-1.209 J-1.133 E.07101 G1 X-36.646 Y33.817 E.02868 G2 X-38.612 Y33.476 I-1.209 J1.133 E.07101 G1 X-39.267 Y34.04 E.02868 G3 X-41.232 Y34.382 I-1.209 J-1.133 E.07101 G1 X-41.888 Y33.817 E.02868 G2 X-43.853 Y33.476 I-1.209 J1.133 E.07101 G1 X-44.508 Y34.04 E.02868 G3 X-46.474 Y34.382 I-1.209 J-1.133 E.07101 G2 X-47.784 Y33.348 I-6.437 J6.812 E.05544 G1 X-48.537 Y33.301 E.02502 G1 X-48.537 Y35.902 E.0863 G1 X-47.784 Y36.096 E.02579 G1 X-47.129 Y36.661 E.02868 G2 X-45.163 Y37.002 I1.209 J-1.133 E.07101 G1 X-44.508 Y36.438 E.02868 G3 X-42.543 Y36.096 I1.209 J1.133 E.07101 G1 X-41.888 Y36.661 E.02868 G2 X-39.922 Y37.002 I1.209 J-1.133 E.07101 G1 X-39.267 Y36.438 E.02868 G3 X-37.301 Y36.096 I1.209 J1.133 E.07101 G1 X-36.646 Y36.661 E.02868 G2 X-34.681 Y37.002 I1.209 J-1.133 E.07101 G1 X-34.026 Y36.438 E.02868 G3 X-32.06 Y36.096 I1.209 J1.133 E.07101 G1 X-31.405 Y36.661 E.02868 G2 X-29.44 Y37.002 I1.209 J-1.133 E.07101 G1 X-28.784 Y36.438 E.02868 G3 X-26.819 Y36.096 I1.209 J1.133 E.07101 G1 X-26.164 Y36.661 E.02868 G2 X-24.198 Y37.002 I1.209 J-1.133 E.07101 G1 X-23.543 Y36.438 E.02868 G3 X-21.578 Y36.096 I1.209 J1.133 E.07101 G1 X-20.922 Y36.661 E.02868 G2 X-18.957 Y37.002 I1.209 J-1.133 E.07101 G1 X-18.302 Y36.438 E.02868 G3 X-16.336 Y36.096 I1.209 J1.133 E.07101 G1 X-15.681 Y36.661 E.02868 G2 X-13.716 Y37.002 I1.209 J-1.133 E.07101 G1 X-13.06 Y36.438 E.02868 G3 X-11.095 Y36.096 I1.209 J1.133 E.07101 G1 X-10.44 Y36.661 E.02868 G2 X-8.474 Y37.002 I1.209 J-1.133 E.07101 G1 X-7.819 Y36.438 E.02868 G3 X-5.854 Y36.096 I1.209 J1.133 E.07101 G1 X-5.198 Y36.661 E.02868 G2 X-3.233 Y37.002 I1.209 J-1.133 E.07101 G1 X-2.578 Y36.438 E.02868 G3 X-.612 Y36.096 I1.209 J1.133 E.07101 G1 X.043 Y36.661 E.02868 G2 X2.008 Y37.002 I1.209 J-1.133 E.07101 G1 X2.663 Y36.438 E.02868 G3 X4.629 Y36.096 I1.209 J1.133 E.07101 G1 X5.284 Y36.661 E.02868 G2 X7.25 Y37.002 I1.209 J-1.133 E.07101 G1 X7.905 Y36.438 E.02868 G3 X9.87 Y36.096 I1.209 J1.133 E.07101 G1 X10.525 Y36.661 E.02868 G2 X12.491 Y37.002 I1.209 J-1.133 E.07101 G1 X13.146 Y36.438 E.02868 G3 X15.112 Y36.096 I1.209 J1.133 E.07101 G1 X15.767 Y36.661 E.02868 G2 X17.732 Y37.002 I1.209 J-1.133 E.07101 G1 X18.387 Y36.438 E.02868 G3 X20.353 Y36.096 I1.209 J1.133 E.07101 G1 X21.008 Y36.661 E.02868 G2 X22.974 Y37.002 I1.209 J-1.133 E.07101 G1 X23.629 Y36.438 E.02868 G3 X25.594 Y36.096 I1.209 J1.133 E.07101 G2 X26.905 Y37.13 I6.437 J-6.812 E.05544 G1 X27.56 Y37.208 E.02189 G1 X27.937 Y37.09 E.01312 G1 X27.937 Y34.543 E.08449 G1 X27.56 Y34.588 E.0126 G1 X26.905 Y34.382 E.02278 G1 X26.249 Y33.817 E.02868 G2 X24.284 Y33.476 I-1.209 J1.133 E.07101 G1 X23.629 Y34.04 E.02868 G3 X21.663 Y34.382 I-1.209 J-1.133 E.07101 G1 X21.008 Y33.817 E.02868 G2 X19.043 Y33.476 I-1.209 J1.133 E.07101 G1 X18.387 Y34.04 E.02868 G3 X16.422 Y34.382 I-1.209 J-1.133 E.07101 G1 X15.767 Y33.817 E.02868 G2 X13.801 Y33.476 I-1.209 J1.133 E.07101 G1 X13.146 Y34.04 E.02868 G3 X11.181 Y34.382 I-1.209 J-1.133 E.07101 G1 X10.525 Y33.817 E.02868 G2 X8.56 Y33.476 I-1.209 J1.133 E.07101 G1 X7.905 Y34.04 E.02868 G3 X5.939 Y34.382 I-1.209 J-1.133 E.07101 G2 X4.963 Y33.587 I-4.931 J5.063 E.0418 G1 X4.963 Y31.143 E.08109 G1 X5.284 Y31.419 E.01405 G2 X7.25 Y31.761 I1.209 J-1.133 E.07101 G1 X7.905 Y31.197 E.02868 G3 X9.87 Y30.855 I1.209 J1.133 E.07101 G1 X10.525 Y31.419 E.02868 G2 X12.491 Y31.761 I1.209 J-1.133 E.07101 G1 X13.146 Y31.197 E.02868 G3 X15.112 Y30.855 I1.209 J1.133 E.07101 G1 X15.767 Y31.419 E.02868 G2 X17.732 Y31.761 I1.209 J-1.133 E.07101 G1 X18.387 Y31.197 E.02868 G3 X20.353 Y30.855 I1.209 J1.133 E.07101 G2 X21.663 Y31.889 I6.437 J-6.812 E.05544 G1 X21.937 Y31.921 E.00914 G1 X21.937 Y29.226 E.0894 G1 X21.663 Y29.14 E.00952 G1 X21.008 Y28.576 E.02868 G2 X19.043 Y28.234 I-1.209 J1.133 E.07101 G1 X18.387 Y28.799 E.02868 G3 X16.422 Y29.14 I-1.209 J-1.133 E.07101 G1 X15.767 Y28.576 E.02868 G2 X13.801 Y28.234 I-1.209 J1.133 E.07101 G1 X13.146 Y28.799 E.02868 G3 X11.181 Y29.14 I-1.209 J-1.133 E.07101 G1 X10.525 Y28.576 E.02868 G2 X8.56 Y28.234 I-1.209 J1.133 E.07101 G1 X7.905 Y28.799 E.02868 G3 X5.939 Y29.14 I-1.209 J-1.133 E.07101 G2 X4.963 Y28.346 I-4.931 J5.063 E.0418 G1 X4.963 Y25.902 E.08109 G1 X5.284 Y26.178 E.01405 G2 X7.25 Y26.52 I1.209 J-1.133 E.07101 G1 X7.905 Y25.955 E.02868 G3 X9.87 Y25.614 I1.209 J1.133 E.07101 G1 X10.525 Y26.178 E.02868 G2 X12.491 Y26.52 I1.209 J-1.133 E.07101 G1 X13.146 Y25.955 E.02868 G3 X15.112 Y25.614 I1.209 J1.133 E.07101 G1 X15.767 Y26.178 E.02868 G2 X17.732 Y26.52 I1.209 J-1.133 E.07101 G1 X18.387 Y25.955 E.02868 G3 X20.353 Y25.614 I1.209 J1.133 E.07101 G2 X21.663 Y26.648 I6.437 J-6.812 E.05544 G1 X21.937 Y26.68 E.00914 G1 X21.937 Y23.985 E.0894 G1 X21.663 Y23.899 E.00952 G1 X21.008 Y23.335 E.02868 G2 X19.043 Y22.993 I-1.209 J1.133 E.07101 G1 X18.387 Y23.557 E.02868 G3 X16.422 Y23.899 I-1.209 J-1.133 E.07101 G1 X15.767 Y23.335 E.02868 G2 X13.801 Y22.993 I-1.209 J1.133 E.07101 G1 X13.146 Y23.557 E.02868 G3 X11.181 Y23.899 I-1.209 J-1.133 E.07101 G1 X10.525 Y23.335 E.02868 G2 X8.56 Y22.993 I-1.209 J1.133 E.07101 G1 X7.905 Y23.557 E.02868 G3 X5.939 Y23.899 I-1.209 J-1.133 E.07101 G1 X5.284 Y23.335 E.02868 G2 X3.319 Y22.993 I-1.209 J1.133 E.07101 G3 X2.413 Y23.737 I-4.612 J-4.693 E.03892 G1 X.51 Y23.737 E.06314 G1 X.043 Y23.335 E.02044 G2 X-1.923 Y22.993 I-1.209 J1.133 E.07101 G3 X-2.828 Y23.737 I-4.612 J-4.693 E.03892 G1 X-4.732 Y23.737 E.06314 G1 X-5.198 Y23.335 E.02044 G2 X-7.164 Y22.993 I-1.209 J1.133 E.07101 G3 X-8.07 Y23.737 I-4.612 J-4.693 E.03892 G1 X-9.973 Y23.737 E.06314 G1 X-10.44 Y23.335 E.02044 G2 X-12.405 Y22.993 I-1.209 J1.133 E.07101 G3 X-13.311 Y23.737 I-4.612 J-4.693 E.03892 G1 X-15.214 Y23.737 E.06314 G1 X-15.681 Y23.335 E.02044 G2 X-17.647 Y22.993 I-1.209 J1.133 E.07101 G3 X-18.552 Y23.737 I-4.612 J-4.693 E.03892 G1 X-20.456 Y23.737 E.06314 G1 X-20.922 Y23.335 E.02044 G2 X-22.888 Y22.993 I-1.209 J1.133 E.07101 G3 X-23.793 Y23.737 I-4.612 J-4.693 E.03892 G1 X-25.563 Y23.737 E.0587 G1 X-25.563 Y23.852 E.00382 G1 X-26.164 Y23.335 E.02629 G2 X-28.129 Y22.993 I-1.209 J1.133 E.07101 G1 X-28.784 Y23.557 E.02868 G3 X-30.75 Y23.899 I-1.209 J-1.133 E.07101 G1 X-31.405 Y23.335 E.02868 G2 X-33.37 Y22.993 I-1.209 J1.133 E.07101 G1 X-34.026 Y23.557 E.02868 G3 X-35.991 Y23.899 I-1.209 J-1.133 E.07101 G1 X-36.646 Y23.335 E.02868 G2 X-38.612 Y22.993 I-1.209 J1.133 E.07101 G1 X-39.267 Y23.557 E.02868 G3 X-41.232 Y23.899 I-1.209 J-1.133 E.07101 G2 X-42.537 Y22.87 I-6.41 J6.781 E.0552 G1 X-42.537 Y20.378 E.08266 G1 X-41.888 Y20.937 E.02842 G2 X-39.922 Y21.278 I1.209 J-1.133 E.07101 G1 X-39.267 Y20.714 E.02868 G3 X-37.301 Y20.373 I1.209 J1.133 E.07101 G1 X-36.646 Y20.937 E.02868 G2 X-34.681 Y21.278 I1.209 J-1.133 E.07101 G1 X-34.026 Y20.714 E.02868 G3 X-32.06 Y20.373 I1.209 J1.133 E.07101 G1 X-31.405 Y20.937 E.02868 G2 X-29.44 Y21.278 I1.209 J-1.133 E.07101 G1 X-28.784 Y20.714 E.02868 G3 X-26.819 Y20.373 I1.209 J1.133 E.07101 G1 X-26.164 Y20.937 E.02868 G2 X-24.198 Y21.278 I1.209 J-1.133 E.07101 G1 X-23.543 Y20.714 E.02868 G3 X-21.578 Y20.373 I1.209 J1.133 E.07101 G1 X-20.922 Y20.937 E.02868 G2 X-18.957 Y21.278 I1.209 J-1.133 E.07101 G1 X-18.302 Y20.714 E.02868 G3 X-16.336 Y20.373 I1.209 J1.133 E.07101 G1 X-15.681 Y20.937 E.02868 G2 X-13.716 Y21.278 I1.209 J-1.133 E.07101 G1 X-13.06 Y20.714 E.02868 G3 X-11.095 Y20.373 I1.209 J1.133 E.07101 G1 X-10.44 Y20.937 E.02868 G2 X-8.474 Y21.278 I1.209 J-1.133 E.07101 G1 X-7.819 Y20.714 E.02868 G3 X-5.854 Y20.373 I1.209 J1.133 E.07101 G1 X-5.198 Y20.937 E.02868 G2 X-3.233 Y21.278 I1.209 J-1.133 E.07101 G1 X-2.578 Y20.714 E.02868 G3 X-.612 Y20.373 I1.209 J1.133 E.07101 G1 X.043 Y20.937 E.02868 G2 X2.008 Y21.278 I1.209 J-1.133 E.07101 G1 X2.663 Y20.714 E.02868 G3 X4.629 Y20.373 I1.209 J1.133 E.07101 G1 X5.284 Y20.937 E.02868 G2 X7.25 Y21.278 I1.209 J-1.133 E.07101 G1 X7.905 Y20.714 E.02868 G3 X9.87 Y20.373 I1.209 J1.133 E.07101 G1 X10.525 Y20.937 E.02868 G2 X12.491 Y21.278 I1.209 J-1.133 E.07101 G1 X13.146 Y20.714 E.02868 G3 X15.112 Y20.373 I1.209 J1.133 E.07101 G1 X15.767 Y20.937 E.02868 G2 X17.732 Y21.278 I1.209 J-1.133 E.07101 G1 X18.387 Y20.714 E.02868 G3 X20.353 Y20.373 I1.209 J1.133 E.07101 G2 X21.663 Y21.406 I6.437 J-6.812 E.05544 G1 X21.937 Y21.439 E.00914 G1 X21.937 Y18.744 E.0894 G1 X21.663 Y18.658 E.00952 G1 X21.008 Y18.093 E.02868 G2 X19.043 Y17.752 I-1.209 J1.133 E.07101 G1 X18.387 Y18.316 E.02868 G3 X16.422 Y18.658 I-1.209 J-1.133 E.07101 G1 X15.767 Y18.093 E.02868 G2 X13.801 Y17.752 I-1.209 J1.133 E.07101 G1 X13.146 Y18.316 E.02868 G3 X11.181 Y18.658 I-1.209 J-1.133 E.07101 G1 X10.525 Y18.093 E.02868 G2 X8.56 Y17.752 I-1.209 J1.133 E.07101 G1 X7.905 Y18.316 E.02868 G3 X5.939 Y18.658 I-1.209 J-1.133 E.07101 G1 X5.284 Y18.093 E.02868 G2 X3.319 Y17.752 I-1.209 J1.133 E.07101 G1 X2.663 Y18.316 E.02868 G3 X.698 Y18.658 I-1.209 J-1.133 E.07101 G1 X.043 Y18.093 E.02868 G2 X-1.923 Y17.752 I-1.209 J1.133 E.07101 G1 X-2.578 Y18.316 E.02868 G3 X-4.543 Y18.658 I-1.209 J-1.133 E.07101 G1 X-5.198 Y18.093 E.02868 G2 X-7.164 Y17.752 I-1.209 J1.133 E.07101 G1 X-7.819 Y18.316 E.02868 G3 X-9.785 Y18.658 I-1.209 J-1.133 E.07101 G1 X-10.44 Y18.093 E.02868 G2 X-12.405 Y17.752 I-1.209 J1.133 E.07101 G1 X-13.06 Y18.316 E.02868 G3 X-15.026 Y18.658 I-1.209 J-1.133 E.07101 G1 X-15.681 Y18.093 E.02868 G2 X-17.647 Y17.752 I-1.209 J1.133 E.07101 G1 X-18.302 Y18.316 E.02868 G3 X-20.267 Y18.658 I-1.209 J-1.133 E.07101 G1 X-20.922 Y18.093 E.02868 G2 X-22.888 Y17.752 I-1.209 J1.133 E.07101 G1 X-23.543 Y18.316 E.02868 G3 X-25.509 Y18.658 I-1.209 J-1.133 E.07101 G1 X-26.164 Y18.093 E.02868 G2 X-28.129 Y17.752 I-1.209 J1.133 E.07101 G1 X-28.784 Y18.316 E.02868 G3 X-30.75 Y18.658 I-1.209 J-1.133 E.07101 G1 X-31.405 Y18.093 E.02868 G2 X-33.37 Y17.752 I-1.209 J1.133 E.07101 G1 X-34.026 Y18.316 E.02868 G3 X-35.991 Y18.658 I-1.209 J-1.133 E.07101 G1 X-36.646 Y18.093 E.02868 G2 X-38.612 Y17.752 I-1.209 J1.133 E.07101 G1 X-39.267 Y18.316 E.02868 G3 X-41.232 Y18.658 I-1.209 J-1.133 E.07101 G1 X-41.888 Y18.093 E.02868 G2 X-43.805 Y17.737 I-1.199 J1.113 E.06932 G1 X-45.434 Y17.737 E.05401 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-48.537 Y52.625 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-48.537 Y52.467 E.00524 G1 X-47.823 Y52.467 E.02368 G1 X-47.823 Y52.263 E.00675 G1 X-47.27 Y52.263 E.01835 G2 X-46.474 Y52.854 I3.704 J-4.158 E.03294 G2 X-44.626 Y52.263 I.446 J-1.789 E.06777 G1 X-42.537 Y52.263 E.06929 G1 X-42.537 Y51.825 E.01452 G2 X-41.232 Y52.854 I6.406 J-6.781 E.05518 G2 X-39.267 Y52.162 I.444 J-1.876 E.07303 G1 X-38.612 Y51.692 E.02674 G3 X-36.646 Y52.385 I.444 J1.876 E.07303 G1 X-35.991 Y52.854 E.02674 G2 X-34.026 Y52.162 I.444 J-1.876 E.07303 G1 X-33.37 Y51.692 E.02674 G3 X-31.405 Y52.385 I.444 J1.876 E.07303 G1 X-30.75 Y52.854 E.02674 G2 X-28.784 Y52.162 I.444 J-1.876 E.07303 G1 X-28.129 Y51.692 E.02674 G3 X-26.164 Y52.385 I.444 J1.876 E.07303 G1 X-25.509 Y52.854 E.02674 G2 X-23.543 Y52.162 I.444 J-1.876 E.07303 G1 X-22.888 Y51.692 E.02674 G3 X-20.922 Y52.385 I.444 J1.876 E.07303 G1 X-20.267 Y52.854 E.02674 G2 X-18.302 Y52.162 I.444 J-1.876 E.07303 G1 X-17.647 Y51.692 E.02674 G3 X-15.681 Y52.385 I.444 J1.876 E.07303 G1 X-15.026 Y52.854 E.02674 G2 X-13.06 Y52.162 I.444 J-1.876 E.07303 G1 X-12.405 Y51.692 E.02674 G3 X-10.44 Y52.385 I.444 J1.876 E.07303 G1 X-9.785 Y52.854 E.02674 G2 X-7.819 Y52.162 I.444 J-1.876 E.07303 G1 X-7.164 Y51.692 E.02674 G3 X-5.198 Y52.385 I.444 J1.876 E.07303 G1 X-4.543 Y52.854 E.02674 G2 X-2.578 Y52.162 I.444 J-1.876 E.07303 G1 X-1.923 Y51.692 E.02674 G3 X.043 Y52.385 I.444 J1.876 E.07303 G1 X.698 Y52.854 E.02674 G2 X2.663 Y52.162 I.444 J-1.876 E.07303 G1 X3.319 Y51.692 E.02674 G3 X5.284 Y52.385 I.444 J1.876 E.07303 G1 X5.939 Y52.854 E.02674 G2 X7.905 Y52.162 I.444 J-1.876 E.07303 G1 X8.56 Y51.692 E.02674 G3 X10.525 Y52.385 I.444 J1.876 E.07303 G1 X11.181 Y52.854 E.02674 G2 X13.146 Y52.162 I.444 J-1.876 E.07303 G1 X13.801 Y51.692 E.02674 G3 X15.767 Y52.385 I.444 J1.876 E.07303 G1 X16.422 Y52.854 E.02674 G2 X18.387 Y52.162 I.444 J-1.876 E.07303 G1 X19.043 Y51.692 E.02674 G3 X21.008 Y52.385 I.444 J1.876 E.07303 G1 X21.663 Y52.854 E.02674 G2 X23.511 Y52.263 I.446 J-1.789 E.06777 G1 X26.108 Y52.263 E.08615 G2 X26.905 Y52.854 I3.704 J-4.158 E.03294 G1 X27.56 Y52.932 E.02189 G1 X27.937 Y52.814 E.01312 G1 X27.937 Y54.442 E.05401 G1 X27.7 Y52.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y37.744 E.57795 G1 X27.7 Y32.256 F30000 G1 F12000 G1 X27.7 Y17.744 E.57795 G1 X27.223 Y17.58 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X27.223 Y17.737 E.00521 G1 X25.752 Y17.737 E.04881 G1 X25.594 Y17.624 E.00643 G2 X24.332 Y17.737 I-.506 J1.459 E.04333 G1 X22.703 Y17.737 E.05401 G1 X-3.799 Y14.263 F30000 G1 F16200 G1 X-4.563 Y14.263 E.02536 G1 X-4.563 Y13.399 E.02865 G1 X-5.198 Y12.852 E.02781 G2 X-7.164 Y12.511 I-1.209 J1.133 E.07101 G1 X-7.819 Y13.075 E.02868 G3 X-9.785 Y13.416 I-1.209 J-1.133 E.07101 G1 X-10.44 Y12.852 E.02868 G2 X-12.405 Y12.511 I-1.209 J1.133 E.07101 G1 X-13.06 Y13.075 E.02868 G3 X-15.026 Y13.416 I-1.209 J-1.133 E.07101 G2 X-16.037 Y12.597 I-5.087 J5.245 E.04322 G1 X-16.037 Y10.148 E.08125 G1 X-15.681 Y10.454 E.01558 G2 X-13.716 Y10.796 I1.209 J-1.133 E.07101 G1 X-13.06 Y10.232 E.02868 G3 X-11.095 Y9.89 I1.209 J1.133 E.07101 G1 X-10.44 Y10.454 E.02868 G2 X-8.474 Y10.796 I1.209 J-1.133 E.07101 G1 X-7.819 Y10.232 E.02868 G3 X-5.854 Y9.89 I1.209 J1.133 E.07101 G2 X-4.563 Y10.909 I6.348 J-6.708 E.05463 G1 X-4.563 Y8.158 E.09127 G1 X-5.198 Y7.611 E.02781 G2 X-7.164 Y7.269 I-1.209 J1.133 E.07101 G1 X-7.819 Y7.833 E.02868 G3 X-9.785 Y8.175 I-1.209 J-1.133 E.07101 G1 X-10.44 Y7.611 E.02868 G2 X-12.405 Y7.269 I-1.209 J1.133 E.07101 G1 X-13.06 Y7.833 E.02868 G3 X-15.026 Y8.175 I-1.209 J-1.133 E.07101 G2 X-16.037 Y7.356 I-5.087 J5.245 E.04322 G1 X-16.037 Y4.906 E.08125 G1 X-15.681 Y5.213 E.01558 G2 X-13.716 Y5.554 I1.209 J-1.133 E.07101 G1 X-13.06 Y4.99 E.02868 G3 X-11.095 Y4.649 I1.209 J1.133 E.07101 G1 X-10.44 Y5.213 E.02868 G2 X-8.474 Y5.554 I1.209 J-1.133 E.07101 G1 X-7.819 Y4.99 E.02868 G3 X-5.854 Y4.649 I1.209 J1.133 E.07101 G2 X-4.563 Y5.668 I6.348 J-6.708 E.05463 G1 X-4.563 Y2.917 E.09127 G1 X-5.198 Y2.37 E.02781 G2 X-7.164 Y2.028 I-1.209 J1.133 E.07101 G1 X-7.819 Y2.592 E.02868 G3 X-9.785 Y2.934 I-1.209 J-1.133 E.07101 G1 X-10.44 Y2.37 E.02868 G2 X-12.405 Y2.028 I-1.209 J1.133 E.07101 G1 X-13.06 Y2.592 E.02868 G3 X-15.026 Y2.934 I-1.209 J-1.133 E.07101 G2 X-16.037 Y2.115 I-5.087 J5.245 E.04322 G1 X-16.037 Y-.335 E.08125 G1 X-15.681 Y-.028 E.01558 G2 X-13.716 Y.313 I1.209 J-1.133 E.07101 G1 X-13.06 Y-.251 E.02868 G3 X-11.095 Y-.593 I1.209 J1.133 E.07101 G1 X-10.44 Y-.028 E.02868 G2 X-8.474 Y.313 I1.209 J-1.133 E.07101 G1 X-7.819 Y-.251 E.02868 G3 X-5.854 Y-.593 I1.209 J1.133 E.07101 G2 X-4.563 Y.427 I6.348 J-6.708 E.05463 G1 X-4.563 Y-1.201 E.05401 G1 X8.653 Y-2.263 F30000 G1 F16200 G1 X8.763 Y-2.263 E.00365 G1 X8.763 Y-.745 E.05037 G1 X9.215 Y-.799 E.0151 G1 X9.87 Y-.593 E.02278 G2 X11.181 Y.441 I6.437 J-6.812 E.05544 G2 X13.146 Y-.251 I.444 J-1.876 E.07303 G1 X13.801 Y-.721 E.02674 G3 X15.767 Y-.028 I.444 J1.876 E.07303 G1 X16.422 Y.441 E.02674 G2 X18.387 Y-.251 I.444 J-1.876 E.07303 G1 X19.043 Y-.721 E.02674 G3 X21.008 Y-.028 I.444 J1.876 E.07303 G1 X21.663 Y.441 E.02674 G2 X22.976 Y.311 I.513 J-1.516 E.04509 G2 X23.943 Y2.321 I3.265 J-.334 E.0755 G3 X22.974 Y3.062 I-4.625 J-5.053 E.04052 G3 X21.008 Y2.37 I-.444 J-1.876 E.07303 G1 X20.353 Y1.9 E.02674 G2 X18.387 Y2.592 I-.444 J1.876 E.07303 G1 X17.732 Y3.062 E.02674 G3 X15.767 Y2.37 I-.444 J-1.876 E.07303 G1 X15.112 Y1.9 E.02674 G2 X13.146 Y2.592 I-.444 J1.876 E.07303 G1 X12.491 Y3.062 E.02674 G3 X10.525 Y2.37 I-.444 J-1.876 E.07303 G1 X9.87 Y1.9 E.02674 G1 X9.215 Y1.822 E.02189 G1 X8.763 Y1.964 E.01572 G1 X8.763 Y2.909 E.03134 G3 X9.426 Y2.752 I.995 J2.73 E.02265 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X8.763 Y2.909 G1 X8.763 Y1.964 G1 X9.12 Y1.852 ;WIPE_END G1 X16.656 Y.642 Z1.6 F30000 G1 X28.535 Y-1.264 Z1.6 G1 Z1.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.393963 G1 F12000 G3 X28.611 Y-.863 I-8.111 J1.762 E.0117 ;WIDTH:0.344559 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.307221 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276407 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385478 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409518 G1 X28.535 Y1.264 E.00864 G1 X25.674 Y3.193 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X27.278 Y3.051 I.488 J-3.62 E.05385 G2 X27.937 Y3.095 I.378 J-.71 E.02259 G1 X27.937 Y5.642 E.08449 G1 X27.56 Y5.76 E.01312 G1 X26.905 Y5.682 E.02189 G1 X26.249 Y5.213 E.02674 G2 X24.284 Y4.521 I-1.521 J1.184 E.07303 G1 X23.629 Y4.99 E.02674 G3 X21.663 Y5.682 I-1.521 J-1.184 E.07303 G1 X21.008 Y5.213 E.02674 G2 X19.043 Y4.521 I-1.521 J1.184 E.07303 G1 X18.387 Y4.99 E.02674 G3 X16.422 Y5.682 I-1.521 J-1.184 E.07303 G1 X15.767 Y5.213 E.02674 G2 X13.801 Y4.521 I-1.521 J1.184 E.07303 G2 X12.491 Y5.554 I5.127 J7.846 E.05544 G1 X12.353 Y5.598 E.0048 G3 X10.782 Y7.832 I-2.66 J-.201 E.09511 G2 X12.491 Y8.303 I1.26 J-1.238 E.06158 G1 X13.146 Y7.833 E.02674 G3 X15.112 Y7.141 I1.521 J1.184 E.07303 G1 X15.767 Y7.611 E.02674 G2 X17.732 Y8.303 I1.521 J-1.184 E.07303 G1 X18.387 Y7.833 E.02674 G3 X20.353 Y7.141 I1.521 J1.184 E.07303 G1 X21.008 Y7.611 E.02674 G2 X22.974 Y8.303 I1.521 J-1.184 E.07303 G1 X23.629 Y7.833 E.02674 G3 X25.594 Y7.141 I1.521 J1.184 E.07303 G3 X26.905 Y8.175 I-5.127 J7.845 E.05544 G1 X27.56 Y8.381 E.02278 G1 X27.937 Y8.336 E.0126 G1 X27.937 Y10.883 E.08449 G1 X27.56 Y11.002 E.01312 G1 X26.905 Y10.924 E.02189 G1 X26.249 Y10.454 E.02674 G2 X24.284 Y9.762 I-1.521 J1.184 E.07303 G1 X23.629 Y10.232 E.02674 G3 X21.663 Y10.924 I-1.521 J-1.184 E.07303 G1 X21.008 Y10.454 E.02674 G2 X19.043 Y9.762 I-1.521 J1.184 E.07303 G1 X18.387 Y10.232 E.02674 G3 X16.422 Y10.924 I-1.521 J-1.184 E.07303 G1 X15.767 Y10.454 E.02674 G2 X13.801 Y9.762 I-1.521 J1.184 E.07303 G1 X13.146 Y10.232 E.02674 G3 X11.181 Y10.924 I-1.521 J-1.184 E.07303 G3 X9.87 Y9.89 I5.127 J-7.846 E.05544 G1 X9.215 Y9.684 E.02278 G1 X8.763 Y9.738 E.0151 G1 X8.763 Y12.447 E.08986 G1 X9.215 Y12.305 E.01572 G1 X9.87 Y12.383 E.02189 G1 X10.525 Y12.852 E.02674 G2 X12.491 Y13.544 I1.521 J-1.184 E.07303 G1 X13.146 Y13.075 E.02674 G3 X15.112 Y12.383 I1.521 J1.184 E.07303 G1 X15.767 Y12.852 E.02674 G2 X17.732 Y13.544 I1.521 J-1.184 E.07303 G1 X18.387 Y13.075 E.02674 G3 X20.353 Y12.383 I1.521 J1.184 E.07303 G1 X21.008 Y12.852 E.02674 G2 X22.974 Y13.544 I1.521 J-1.184 E.07303 G1 X23.629 Y13.075 E.02674 G3 X25.594 Y12.383 I1.521 J1.184 E.07303 G3 X26.905 Y13.416 I-5.127 J7.845 E.05544 G1 X27.56 Y13.622 E.02278 G1 X27.937 Y13.577 E.0126 G1 X27.937 Y16.124 E.08449 G1 X27.56 Y16.243 E.01312 G1 X26.905 Y16.165 E.02189 G1 X26.249 Y15.695 E.02674 G2 X24.284 Y15.003 I-1.521 J1.184 E.07303 G1 X23.629 Y15.473 E.02674 G3 X21.663 Y16.165 I-1.521 J-1.184 E.07303 G1 X21.008 Y15.695 E.02674 G2 X19.043 Y15.003 I-1.521 J1.184 E.07303 G1 X18.387 Y15.473 E.02674 G3 X16.422 Y16.165 I-1.521 J-1.184 E.07303 G1 X15.767 Y15.695 E.02674 G2 X13.801 Y15.003 I-1.521 J1.184 E.07303 G1 X13.146 Y15.473 E.02674 G3 X11.181 Y16.165 I-1.521 J-1.184 E.07303 G1 X10.525 Y15.695 E.02674 G2 X8.56 Y15.003 I-1.521 J1.184 E.07303 G1 X7.905 Y15.473 E.02674 G3 X5.939 Y16.165 I-1.521 J-1.184 E.07303 G1 X5.284 Y15.695 E.02674 G2 X3.319 Y15.003 I-1.521 J1.184 E.07303 G1 X2.663 Y15.473 E.02674 G3 X.698 Y16.165 I-1.521 J-1.184 E.07303 G1 X.043 Y15.695 E.02674 G2 X-1.923 Y15.003 I-1.521 J1.184 E.07303 G1 X-2.578 Y15.473 E.02674 G3 X-4.543 Y16.165 I-1.521 J-1.184 E.07303 G1 X-5.198 Y15.695 E.02674 G2 X-7.164 Y15.003 I-1.521 J1.184 E.07303 G1 X-7.819 Y15.473 E.02674 G3 X-9.785 Y16.165 I-1.521 J-1.184 E.07303 G1 X-10.44 Y15.695 E.02674 G2 X-12.405 Y15.003 I-1.521 J1.184 E.07303 G1 X-13.06 Y15.473 E.02674 G3 X-15.026 Y16.165 I-1.521 J-1.184 E.07303 G1 X-15.681 Y15.695 E.02674 G2 X-17.647 Y15.003 I-1.521 J1.184 E.07303 G1 X-18.302 Y15.473 E.02674 G3 X-20.267 Y16.165 I-1.521 J-1.184 E.07303 G1 X-20.922 Y15.695 E.02674 G2 X-22.888 Y15.003 I-1.521 J1.184 E.07303 G1 X-23.543 Y15.473 E.02674 G3 X-25.509 Y16.165 I-1.521 J-1.184 E.07303 G1 X-26.164 Y15.695 E.02674 G2 X-28.129 Y15.003 I-1.521 J1.184 E.07303 G1 X-28.784 Y15.473 E.02674 G3 X-30.75 Y16.165 I-1.521 J-1.184 E.07303 G1 X-31.405 Y15.695 E.02674 G2 X-33.37 Y15.003 I-1.521 J1.184 E.07303 G1 X-34.026 Y15.473 E.02674 G3 X-35.991 Y16.165 I-1.521 J-1.184 E.07303 G1 X-36.646 Y15.695 E.02674 G2 X-38.612 Y15.003 I-1.521 J1.184 E.07303 G1 X-39.267 Y15.473 E.02674 G3 X-41.232 Y16.165 I-1.521 J-1.184 E.07303 G1 X-41.888 Y15.695 E.02674 G2 X-43.853 Y15.003 I-1.521 J1.184 E.07303 G1 X-44.508 Y15.473 E.02674 G3 X-46.474 Y16.165 I-1.521 J-1.184 E.07303 G3 X-47.784 Y15.131 I5.127 J-7.846 E.05544 G1 X-48.537 Y14.937 E.02579 G1 X-48.537 Y12.335 E.0863 G1 X-47.784 Y12.383 E.02502 G1 X-47.129 Y12.852 E.02674 G2 X-45.163 Y13.544 I1.521 J-1.184 E.07303 G1 X-44.508 Y13.075 E.02674 G3 X-42.543 Y12.383 I1.521 J1.184 E.07303 G1 X-41.888 Y12.852 E.02674 G2 X-39.922 Y13.544 I1.521 J-1.184 E.07303 G1 X-39.267 Y13.075 E.02674 G3 X-37.301 Y12.383 I1.521 J1.184 E.07303 G1 X-36.646 Y12.852 E.02674 G2 X-34.681 Y13.544 I1.521 J-1.184 E.07303 G1 X-34.026 Y13.075 E.02674 G3 X-32.06 Y12.383 I1.521 J1.184 E.07303 G1 X-31.405 Y12.852 E.02674 G2 X-29.44 Y13.544 I1.521 J-1.184 E.07303 G1 X-29.363 Y13.49 E.00312 G1 X-29.363 Y14.263 E.02566 G1 X-28.508 Y14.263 E.02835 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-29.363 Y14.263 G1 X-29.363 Y13.49 G1 X-29.44 Y13.544 G1 X-29.715 Y13.577 ;WIPE_END G1 X-29.486 Y5.948 Z1.6 F30000 G1 X-29.363 Y1.876 Z1.6 G1 Z1.2 G1 E.8 F1800 G1 F16200 G1 X-29.363 Y.247 E.05401 G3 X-30.75 Y.441 I-.943 J-1.689 E.04753 G1 X-31.405 Y-.028 E.02674 G2 X-33.37 Y-.721 I-1.521 J1.184 E.07303 G1 X-34.026 Y-.251 E.02674 G3 X-35.991 Y.441 I-1.521 J-1.184 E.07303 G1 X-36.646 Y-.028 E.02674 G2 X-38.612 Y-.721 I-1.521 J1.184 E.07303 G1 X-39.267 Y-.251 E.02674 G3 X-41.232 Y.441 I-1.521 J-1.184 E.07303 G3 X-42.543 Y-.593 I5.127 J-7.846 E.05544 G1 X-43.198 Y-.799 E.02278 G1 X-43.651 Y-.745 E.01513 G2 X-44.73 Y-2.491 I-3.177 J.757 E.06925 G1 X-44.508 Y-2.649 E.00903 G3 X-42.543 Y-3.341 I1.521 J1.184 E.07303 G1 X-41.888 Y-2.872 E.02674 G2 X-39.922 Y-2.18 I1.521 J-1.184 E.07303 G1 X-39.267 Y-2.649 E.02674 G3 X-37.301 Y-3.341 I1.521 J1.184 E.07303 G1 X-36.646 Y-2.872 E.02674 G2 X-34.681 Y-2.18 I1.521 J-1.184 E.07303 G1 X-34.026 Y-2.649 E.02674 G3 X-32.06 Y-3.341 I1.521 J1.184 E.07303 G1 X-31.405 Y-2.872 E.02674 G2 X-29.44 Y-2.18 I1.521 J-1.184 E.07303 G1 X-28.784 Y-2.649 E.02674 G3 X-26.819 Y-3.341 I1.521 J1.184 E.07303 G3 X-25.509 Y-2.307 I-5.127 J7.846 E.05544 G1 X-24.082 Y-2.263 E.04735 G1 X-23.543 Y-2.649 E.02198 G3 X-21.578 Y-3.341 I1.521 J1.184 E.07303 G3 X-20.267 Y-2.307 I-5.127 J7.846 E.05544 G1 X-18.84 Y-2.263 E.04735 G1 X-18.302 Y-2.649 E.02198 G3 X-16.336 Y-3.341 I1.521 J1.184 E.07303 G1 X-15.681 Y-2.872 E.02674 G2 X-13.716 Y-2.18 I1.521 J-1.184 E.07303 G1 X-13.06 Y-2.649 E.02674 G3 X-11.095 Y-3.341 I1.521 J1.184 E.07303 G1 X-10.44 Y-2.872 E.02674 G2 X-8.474 Y-2.18 I1.521 J-1.184 E.07303 G1 X-7.819 Y-2.649 E.02674 G3 X-5.854 Y-3.341 I1.521 J1.184 E.07303 G3 X-4.543 Y-2.307 I-5.127 J7.846 E.05544 G1 X-3.116 Y-2.263 E.04735 G1 X-2.578 Y-2.649 E.02198 G3 X-.612 Y-3.341 I1.521 J1.184 E.07303 G3 X.698 Y-2.307 I-5.127 J7.846 E.05544 G1 X2.125 Y-2.263 E.04735 G1 X2.663 Y-2.649 E.02198 G3 X4.629 Y-3.341 I1.521 J1.184 E.07303 G3 X5.939 Y-2.307 I-5.127 J7.846 E.05544 G1 X7.366 Y-2.263 E.04735 G1 X7.905 Y-2.649 E.02198 G3 X9.87 Y-3.341 I1.521 J1.184 E.07303 G1 X10.525 Y-2.872 E.02674 G2 X12.491 Y-2.18 I1.521 J-1.184 E.07303 G1 X13.146 Y-2.649 E.02674 G3 X15.112 Y-3.341 I1.521 J1.184 E.07303 G1 X15.767 Y-2.872 E.02674 G2 X17.732 Y-2.18 I1.521 J-1.184 E.07303 G1 X18.387 Y-2.649 E.02674 G3 X20.353 Y-3.341 I1.521 J1.184 E.07303 G1 X21.008 Y-2.872 E.02674 G2 X22.974 Y-2.18 I1.521 J-1.184 E.07303 G1 X23.629 Y-2.649 E.02674 G3 X25.594 Y-3.341 I1.521 J1.184 E.07303 G1 X25.779 Y-3.209 E.00755 G3 X27.937 Y-2.731 I.374 J3.426 E.07463 G1 X27.937 Y-4.737 E.06653 G1 X18.937 Y-4.737 E.29855 G1 X18.937 Y-5.886 E.03812 G1 X18.387 Y-5.492 E.02243 G3 X16.422 Y-4.8 I-1.521 J-1.184 E.07303 M73 P23 R61 G1 X15.767 Y-5.27 E.02674 G2 X13.801 Y-5.962 I-1.521 J1.184 E.07303 G1 X13.146 Y-5.492 E.02674 G3 X11.181 Y-4.8 I-1.521 J-1.184 E.07303 G1 X10.525 Y-5.27 E.02674 G2 X8.56 Y-5.962 I-1.521 J1.184 E.07303 G1 X7.905 Y-5.492 E.02674 G3 X5.939 Y-4.8 I-1.521 J-1.184 E.07303 G1 X5.284 Y-5.27 E.02674 G2 X3.319 Y-5.962 I-1.521 J1.184 E.07303 G1 X2.663 Y-5.492 E.02674 G3 X.698 Y-4.8 I-1.521 J-1.184 E.07303 G1 X.043 Y-5.27 E.02674 G2 X-1.923 Y-5.962 I-1.521 J1.184 E.07303 G1 X-2.578 Y-5.492 E.02674 G3 X-4.543 Y-4.8 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-5.27 E.02674 G2 X-7.164 Y-5.962 I-1.521 J1.184 E.07303 G1 X-7.819 Y-5.492 E.02674 G3 X-9.785 Y-4.8 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-5.27 E.02674 G2 X-12.405 Y-5.962 I-1.521 J1.184 E.07303 G1 X-13.06 Y-5.492 E.02674 G3 X-15.026 Y-4.8 I-1.521 J-1.184 E.07303 G1 X-15.681 Y-5.27 E.02674 G2 X-17.647 Y-5.962 I-1.521 J1.184 E.07303 G1 X-18.302 Y-5.492 E.02674 G3 X-20.267 Y-4.8 I-1.521 J-1.184 E.07303 G1 X-20.922 Y-5.27 E.02674 G2 X-22.888 Y-5.962 I-1.521 J1.184 E.07303 G1 X-23.543 Y-5.492 E.02674 G3 X-25.509 Y-4.8 I-1.521 J-1.184 E.07303 G1 X-26.164 Y-5.27 E.02674 G2 X-28.129 Y-5.962 I-1.521 J1.184 E.07303 G1 X-28.784 Y-5.492 E.02674 G3 X-30.75 Y-4.8 I-1.521 J-1.184 E.07303 G1 X-31.405 Y-5.27 E.02674 G2 X-33.37 Y-5.962 I-1.521 J1.184 E.07303 G1 X-34.026 Y-5.492 E.02674 G3 X-35.991 Y-4.8 I-1.521 J-1.184 E.07303 G1 X-36.646 Y-5.27 E.02674 G2 X-38.612 Y-5.962 I-1.521 J1.184 E.07303 G2 X-39.537 Y-5.26 I3.464 J5.525 E.03857 G1 X-39.537 Y-7.697 E.08084 G1 X-39.267 Y-7.89 E.01102 G3 X-37.301 Y-8.583 I1.521 J1.184 E.07303 G1 X-36.646 Y-8.113 E.02674 G2 X-34.681 Y-7.421 I1.521 J-1.184 E.07303 G1 X-34.026 Y-7.89 E.02674 G3 X-32.06 Y-8.583 I1.521 J1.184 E.07303 G1 X-31.405 Y-8.113 E.02674 G2 X-29.44 Y-7.421 I1.521 J-1.184 E.07303 G1 X-28.784 Y-7.89 E.02674 G3 X-26.819 Y-8.583 I1.521 J1.184 E.07303 G1 X-26.164 Y-8.113 E.02674 G2 X-24.198 Y-7.421 I1.521 J-1.184 E.07303 G1 X-23.543 Y-7.89 E.02674 G3 X-21.578 Y-8.583 I1.521 J1.184 E.07303 G1 X-20.922 Y-8.113 E.02674 G2 X-18.957 Y-7.421 I1.521 J-1.184 E.07303 G1 X-18.302 Y-7.89 E.02674 G3 X-16.336 Y-8.583 I1.521 J1.184 E.07303 G1 X-15.681 Y-8.113 E.02674 G2 X-13.716 Y-7.421 I1.521 J-1.184 E.07303 G1 X-13.06 Y-7.89 E.02674 G3 X-11.095 Y-8.583 I1.521 J1.184 E.07303 G1 X-10.44 Y-8.113 E.02674 G2 X-8.474 Y-7.421 I1.521 J-1.184 E.07303 G1 X-7.819 Y-7.89 E.02674 G3 X-5.854 Y-8.583 I1.521 J1.184 E.07303 G1 X-5.198 Y-8.113 E.02674 G2 X-3.233 Y-7.421 I1.521 J-1.184 E.07303 G1 X-2.578 Y-7.89 E.02674 G3 X-.612 Y-8.583 I1.521 J1.184 E.07303 G1 X.043 Y-8.113 E.02674 G2 X2.008 Y-7.421 I1.521 J-1.184 E.07303 G1 X2.663 Y-7.89 E.02674 G3 X4.629 Y-8.583 I1.521 J1.184 E.07303 G1 X5.284 Y-8.113 E.02674 G2 X7.25 Y-7.421 I1.521 J-1.184 E.07303 G1 X7.905 Y-7.89 E.02674 G3 X9.87 Y-8.583 I1.521 J1.184 E.07303 G1 X10.525 Y-8.113 E.02674 G2 X12.491 Y-7.421 I1.521 J-1.184 E.07303 G1 X13.146 Y-7.89 E.02674 G3 X15.112 Y-8.583 I1.521 J1.184 E.07303 G1 X15.767 Y-8.113 E.02674 G2 X17.732 Y-7.421 I1.521 J-1.184 E.07303 G2 X18.937 Y-8.364 I-4.67 J-7.209 E.05081 G1 X18.937 Y-11.127 E.09168 G1 X18.387 Y-10.734 E.02243 G3 X16.422 Y-10.042 I-1.521 J-1.184 E.07303 G1 X15.767 Y-10.511 E.02674 G2 X13.801 Y-11.203 I-1.521 J1.184 E.07303 G1 X13.146 Y-10.734 E.02674 G3 X11.181 Y-10.042 I-1.521 J-1.184 E.07303 G1 X10.525 Y-10.511 E.02674 G2 X8.56 Y-11.203 I-1.521 J1.184 E.07303 G1 X7.905 Y-10.734 E.02674 G3 X5.939 Y-10.042 I-1.521 J-1.184 E.07303 G1 X5.284 Y-10.511 E.02674 G2 X3.319 Y-11.203 I-1.521 J1.184 E.07303 G1 X2.663 Y-10.734 E.02674 G3 X.698 Y-10.042 I-1.521 J-1.184 E.07303 G1 X.043 Y-10.511 E.02674 G2 X-1.923 Y-11.203 I-1.521 J1.184 E.07303 G1 X-2.578 Y-10.734 E.02674 G3 X-4.543 Y-10.042 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-10.511 E.02674 G2 X-7.164 Y-11.203 I-1.521 J1.184 E.07303 G1 X-7.819 Y-10.734 E.02674 G3 X-9.785 Y-10.042 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-10.511 E.02674 G2 X-12.405 Y-11.203 I-1.521 J1.184 E.07303 G1 X-13.06 Y-10.734 E.02674 G3 X-15.026 Y-10.042 I-1.521 J-1.184 E.07303 G1 X-15.681 Y-10.511 E.02674 G2 X-17.647 Y-11.203 I-1.521 J1.184 E.07303 G1 X-18.302 Y-10.734 E.02674 G3 X-20.267 Y-10.042 I-1.521 J-1.184 E.07303 G1 X-20.922 Y-10.511 E.02674 G2 X-22.888 Y-11.203 I-1.521 J1.184 E.07303 G1 X-23.543 Y-10.734 E.02674 G3 X-25.509 Y-10.042 I-1.521 J-1.184 E.07303 G1 X-26.164 Y-10.511 E.02674 G2 X-28.129 Y-11.203 I-1.521 J1.184 E.07303 G1 X-28.784 Y-10.734 E.02674 G3 X-30.75 Y-10.042 I-1.521 J-1.184 E.07303 G1 X-31.405 Y-10.511 E.02674 G2 X-33.37 Y-11.203 I-1.521 J1.184 E.07303 G1 X-34.026 Y-10.734 E.02674 G3 X-35.991 Y-10.042 I-1.521 J-1.184 E.07303 G1 X-36.646 Y-10.511 E.02674 G2 X-38.612 Y-11.203 I-1.521 J1.184 E.07303 G2 X-39.537 Y-10.501 I3.464 J5.525 E.03857 G1 X-39.537 Y-12.938 E.08084 G1 X-39.267 Y-13.132 E.01102 G3 X-37.301 Y-13.824 I1.521 J1.184 E.07303 G1 X-36.646 Y-13.354 E.02674 G2 X-34.681 Y-12.662 I1.521 J-1.184 E.07303 G1 X-34.026 Y-13.132 E.02674 G3 X-32.06 Y-13.824 I1.521 J1.184 E.07303 G1 X-31.405 Y-13.354 E.02674 G2 X-29.44 Y-12.662 I1.521 J-1.184 E.07303 G1 X-28.784 Y-13.132 E.02674 G3 X-26.819 Y-13.824 I1.521 J1.184 E.07303 G1 X-26.164 Y-13.354 E.02674 G2 X-24.198 Y-12.662 I1.521 J-1.184 E.07303 G1 X-23.543 Y-13.132 E.02674 G3 X-21.578 Y-13.824 I1.521 J1.184 E.07303 G1 X-20.922 Y-13.354 E.02674 G2 X-18.957 Y-12.662 I1.521 J-1.184 E.07303 G1 X-18.302 Y-13.132 E.02674 G3 X-16.336 Y-13.824 I1.521 J1.184 E.07303 G1 X-15.681 Y-13.354 E.02674 G2 X-13.716 Y-12.662 I1.521 J-1.184 E.07303 G1 X-13.06 Y-13.132 E.02674 G3 X-11.095 Y-13.824 I1.521 J1.184 E.07303 G1 X-10.44 Y-13.354 E.02674 G2 X-8.474 Y-12.662 I1.521 J-1.184 E.07303 G1 X-7.819 Y-13.132 E.02674 G3 X-5.854 Y-13.824 I1.521 J1.184 E.07303 G1 X-5.198 Y-13.354 E.02674 G2 X-3.233 Y-12.662 I1.521 J-1.184 E.07303 G1 X-2.578 Y-13.132 E.02674 G3 X-.612 Y-13.824 I1.521 J1.184 E.07303 G1 X.043 Y-13.354 E.02674 G2 X2.008 Y-12.662 I1.521 J-1.184 E.07303 G1 X2.663 Y-13.132 E.02674 G3 X4.629 Y-13.824 I1.521 J1.184 E.07303 G1 X5.284 Y-13.354 E.02674 G2 X7.25 Y-12.662 I1.521 J-1.184 E.07303 G1 X7.905 Y-13.132 E.02674 G3 X9.87 Y-13.824 I1.521 J1.184 E.07303 G1 X10.525 Y-13.354 E.02674 G2 X12.491 Y-12.662 I1.521 J-1.184 E.07303 G1 X13.146 Y-13.132 E.02674 G3 X15.112 Y-13.824 I1.521 J1.184 E.07303 G1 X15.767 Y-13.354 E.02674 G2 X17.732 Y-12.662 I1.521 J-1.184 E.07303 G2 X18.937 Y-13.605 I-4.67 J-7.209 E.05081 G1 X18.937 Y-16.369 E.09168 G1 X18.387 Y-15.975 E.02243 G3 X16.422 Y-15.283 I-1.521 J-1.184 E.07303 G1 X15.767 Y-15.752 E.02674 G2 X13.801 Y-16.445 I-1.521 J1.184 E.07303 G1 X13.146 Y-15.975 E.02674 G3 X11.181 Y-15.283 I-1.521 J-1.184 E.07303 G1 X10.525 Y-15.752 E.02674 G2 X8.56 Y-16.445 I-1.521 J1.184 E.07303 G1 X7.905 Y-15.975 E.02674 G3 X5.939 Y-15.283 I-1.521 J-1.184 E.07303 G1 X5.284 Y-15.752 E.02674 G2 X3.319 Y-16.445 I-1.521 J1.184 E.07303 G1 X2.663 Y-15.975 E.02674 G3 X.698 Y-15.283 I-1.521 J-1.184 E.07303 G1 X.043 Y-15.752 E.02674 G2 X-1.923 Y-16.445 I-1.521 J1.184 E.07303 G1 X-2.578 Y-15.975 E.02674 G3 X-4.543 Y-15.283 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-15.752 E.02674 G2 X-7.164 Y-16.445 I-1.521 J1.184 E.07303 G1 X-7.819 Y-15.975 E.02674 G3 X-9.785 Y-15.283 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-15.752 E.02674 G2 X-12.405 Y-16.445 I-1.521 J1.184 E.07303 G1 X-13.06 Y-15.975 E.02674 G3 X-15.026 Y-15.283 I-1.521 J-1.184 E.07303 G1 X-15.681 Y-15.752 E.02674 G2 X-17.647 Y-16.445 I-1.521 J1.184 E.07303 G1 X-18.302 Y-15.975 E.02674 G3 X-20.267 Y-15.283 I-1.521 J-1.184 E.07303 G1 X-20.922 Y-15.752 E.02674 G2 X-22.888 Y-16.445 I-1.521 J1.184 E.07303 G1 X-23.543 Y-15.975 E.02674 G3 X-25.509 Y-15.283 I-1.521 J-1.184 E.07303 G1 X-26.164 Y-15.752 E.02674 G2 X-28.129 Y-16.445 I-1.521 J1.184 E.07303 G1 X-28.784 Y-15.975 E.02674 G3 X-30.75 Y-15.283 I-1.521 J-1.184 E.07303 G1 X-31.405 Y-15.752 E.02674 G2 X-33.37 Y-16.445 I-1.521 J1.184 E.07303 G1 X-34.026 Y-15.975 E.02674 G3 X-35.991 Y-15.283 I-1.521 J-1.184 E.07303 G1 X-36.646 Y-15.752 E.02674 G2 X-38.612 Y-16.445 I-1.521 J1.184 E.07303 G2 X-39.537 Y-15.743 I3.464 J5.525 E.03857 G1 X-39.537 Y-18.18 E.08084 G2 X-38.612 Y-18.937 I-3.775 J-5.553 E.03972 G1 X-38.213 Y-19.063 E.01387 G2 X-36.363 Y-18.351 I2.058 J-2.59 E.06678 G2 X-34.681 Y-17.904 I1.233 J-1.249 E.06041 G1 X-34.026 Y-18.373 E.02674 G3 X-32.06 Y-19.065 I1.521 J1.184 E.07303 G1 X-31.405 Y-18.596 E.02674 G2 X-29.44 Y-17.904 I1.521 J-1.184 E.07303 G1 X-28.784 Y-18.373 E.02674 G3 X-26.819 Y-19.065 I1.521 J1.184 E.07303 G1 X-26.164 Y-18.596 E.02674 G2 X-24.198 Y-17.904 I1.521 J-1.184 E.07303 G1 X-23.543 Y-18.373 E.02674 G3 X-21.578 Y-19.065 I1.521 J1.184 E.07303 G1 X-20.922 Y-18.596 E.02674 G2 X-18.957 Y-17.904 I1.521 J-1.184 E.07303 G2 X-17.989 Y-18.643 I-3.65 J-5.785 E.04046 G2 X-16.842 Y-19.063 I-.345 J-2.716 E.04084 G1 X-16.763 Y-19.116 E.00318 G1 X-16.336 Y-19.065 E.01425 G1 X-15.681 Y-18.596 E.02674 G2 X-13.716 Y-17.904 I1.521 J-1.184 E.07303 G1 X-13.06 Y-18.373 E.02674 G3 X-11.095 Y-19.065 I1.521 J1.184 E.07303 G1 X-10.44 Y-18.596 E.02674 G2 X-8.474 Y-17.904 I1.521 J-1.184 E.07303 G1 X-7.819 Y-18.373 E.02674 G3 X-5.854 Y-19.065 I1.521 J1.184 E.07303 G1 X-5.198 Y-18.596 E.02674 G2 X-3.233 Y-17.904 I1.521 J-1.184 E.07303 G1 X-2.578 Y-18.373 E.02674 G3 X-.612 Y-19.065 I1.521 J1.184 E.07303 G1 X.043 Y-18.596 E.02674 G2 X2.008 Y-17.904 I1.521 J-1.184 E.07303 G1 X2.663 Y-18.373 E.02674 G3 X4.629 Y-19.065 I1.521 J1.184 E.07303 G1 X5.284 Y-18.596 E.02674 G2 X7.25 Y-17.904 I1.521 J-1.184 E.07303 G1 X7.905 Y-18.373 E.02674 G3 X9.87 Y-19.065 I1.521 J1.184 E.07303 G1 X10.525 Y-18.596 E.02674 G2 X12.491 Y-17.904 I1.521 J-1.184 E.07303 G1 X13.146 Y-18.373 E.02674 G3 X15.112 Y-19.065 I1.521 J1.184 E.07303 G1 X15.767 Y-18.596 E.02674 G2 X17.732 Y-17.904 I1.521 J-1.184 E.07303 G2 X18.937 Y-18.846 I-4.67 J-7.209 E.05081 G1 X18.937 Y-20.475 E.05401 G1 X18.937 Y-25.223 F30000 G1 F16200 G1 X18.937 Y-26.851 E.05401 G1 X18.387 Y-26.458 E.02243 G3 X16.422 Y-25.765 I-1.521 J-1.184 E.07303 G1 X15.767 Y-26.235 E.02674 G2 X13.801 Y-26.927 I-1.521 J1.184 E.07303 G1 X13.146 Y-26.458 E.02674 G3 X11.181 Y-25.765 I-1.521 J-1.184 E.07303 G1 X10.525 Y-26.235 E.02674 G2 X8.56 Y-26.927 I-1.521 J1.184 E.07303 G1 X7.905 Y-26.458 E.02674 G3 X5.939 Y-25.765 I-1.521 J-1.184 E.07303 G1 X5.284 Y-26.235 E.02674 G2 X3.319 Y-26.927 I-1.521 J1.184 E.07303 G1 X2.663 Y-26.458 E.02674 G3 X.698 Y-25.765 I-1.521 J-1.184 E.07303 G1 X.043 Y-26.235 E.02674 G2 X-1.923 Y-26.927 I-1.521 J1.184 E.07303 G1 X-2.578 Y-26.458 E.02674 G3 X-4.543 Y-25.765 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-26.235 E.02674 G2 X-7.164 Y-26.927 I-1.521 J1.184 E.07303 G1 X-7.819 Y-26.458 E.02674 G3 X-9.785 Y-25.765 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-26.235 E.02674 G2 X-12.405 Y-26.927 I-1.521 J1.184 E.07303 G1 X-13.06 Y-26.458 E.02674 G3 X-15.026 Y-25.765 I-1.521 J-1.184 E.07303 G1 X-15.681 Y-26.235 E.02674 G2 X-17.647 Y-26.927 I-1.521 J1.184 E.07303 G1 X-18.302 Y-26.458 E.02674 G3 X-20.267 Y-25.765 I-1.521 J-1.184 E.07303 G1 X-20.922 Y-26.235 E.02674 G2 X-22.888 Y-26.927 I-1.521 J1.184 E.07303 G1 X-23.543 Y-26.458 E.02674 G3 X-25.509 Y-25.765 I-1.521 J-1.184 E.07303 G1 X-26.164 Y-26.235 E.02674 G2 X-28.129 Y-26.927 I-1.521 J1.184 E.07303 G1 X-28.784 Y-26.458 E.02674 G3 X-30.75 Y-25.765 I-1.521 J-1.184 E.07303 G1 X-31.405 Y-26.235 E.02674 G2 X-33.37 Y-26.927 I-1.521 J1.184 E.07303 G1 X-34.026 Y-26.458 E.02674 G3 X-35.991 Y-25.765 I-1.521 J-1.184 E.07303 G1 X-36.646 Y-26.235 E.02674 G2 X-38.612 Y-26.927 I-1.521 J1.184 E.07303 G2 X-39.537 Y-26.225 I3.464 J5.525 E.03857 G1 X-39.537 Y-28.662 E.08084 G1 X-39.267 Y-28.856 E.01102 G3 X-37.301 Y-29.548 I1.521 J1.184 E.07303 G1 X-36.646 Y-29.078 E.02674 G2 X-34.681 Y-28.386 I1.521 J-1.184 E.07303 G1 X-34.026 Y-28.856 E.02674 G3 X-32.06 Y-29.548 I1.521 J1.184 E.07303 G1 X-31.405 Y-29.078 E.02674 G2 X-29.44 Y-28.386 I1.521 J-1.184 E.07303 G1 X-28.784 Y-28.856 E.02674 G3 X-26.819 Y-29.548 I1.521 J1.184 E.07303 G1 X-26.164 Y-29.078 E.02674 G2 X-24.198 Y-28.386 I1.521 J-1.184 E.07303 G1 X-23.543 Y-28.856 E.02674 G3 X-21.578 Y-29.548 I1.521 J1.184 E.07303 G1 X-20.922 Y-29.078 E.02674 G2 X-18.957 Y-28.386 I1.521 J-1.184 E.07303 G1 X-18.302 Y-28.856 E.02674 G3 X-16.336 Y-29.548 I1.521 J1.184 E.07303 G1 X-15.681 Y-29.078 E.02674 G2 X-13.716 Y-28.386 I1.521 J-1.184 E.07303 G1 X-13.06 Y-28.856 E.02674 G3 X-11.095 Y-29.548 I1.521 J1.184 E.07303 G1 X-10.44 Y-29.078 E.02674 G2 X-8.474 Y-28.386 I1.521 J-1.184 E.07303 G1 X-7.819 Y-28.856 E.02674 G3 X-5.854 Y-29.548 I1.521 J1.184 E.07303 G1 X-5.198 Y-29.078 E.02674 G2 X-3.233 Y-28.386 I1.521 J-1.184 E.07303 G1 X-2.578 Y-28.856 E.02674 G3 X-.612 Y-29.548 I1.521 J1.184 E.07303 G1 X.043 Y-29.078 E.02674 G2 X2.008 Y-28.386 I1.521 J-1.184 E.07303 G1 X2.663 Y-28.856 E.02674 G3 X4.629 Y-29.548 I1.521 J1.184 E.07303 G1 X5.284 Y-29.078 E.02674 G2 X7.25 Y-28.386 I1.521 J-1.184 E.07303 G1 X7.905 Y-28.856 E.02674 G3 X9.87 Y-29.548 I1.521 J1.184 E.07303 G1 X10.525 Y-29.078 E.02674 G2 X12.491 Y-28.386 I1.521 J-1.184 E.07303 G1 X13.146 Y-28.856 E.02674 G3 X15.112 Y-29.548 I1.521 J1.184 E.07303 G1 X15.767 Y-29.078 E.02674 G2 X17.732 Y-28.386 I1.521 J-1.184 E.07303 G2 X18.937 Y-29.329 I-4.671 J-7.209 E.05081 G1 X18.937 Y-32.093 E.09168 G1 X18.387 Y-31.699 E.02243 G3 X16.422 Y-31.007 I-1.521 J-1.184 E.07303 G1 X15.767 Y-31.476 E.02674 G2 X13.801 Y-32.168 I-1.521 J1.184 E.07303 G1 X13.146 Y-31.699 E.02674 G3 X11.181 Y-31.007 I-1.521 J-1.184 E.07303 G1 X10.525 Y-31.476 E.02674 G2 X8.56 Y-32.168 I-1.521 J1.184 E.07303 G1 X7.905 Y-31.699 E.02674 G3 X5.939 Y-31.007 I-1.521 J-1.184 E.07303 G1 X5.284 Y-31.476 E.02674 G2 X3.319 Y-32.168 I-1.521 J1.184 E.07303 G1 X2.663 Y-31.699 E.02674 G3 X.698 Y-31.007 I-1.521 J-1.184 E.07303 G1 X.043 Y-31.476 E.02674 G2 X-1.923 Y-32.168 I-1.521 J1.184 E.07303 G1 X-2.578 Y-31.699 E.02674 G3 X-4.543 Y-31.007 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-31.476 E.02674 G2 X-7.164 Y-32.168 I-1.521 J1.184 E.07303 G1 X-7.819 Y-31.699 E.02674 G3 X-9.785 Y-31.007 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-31.476 E.02674 G2 X-12.405 Y-32.168 I-1.521 J1.184 E.07303 G1 X-13.06 Y-31.699 E.02674 G3 X-15.026 Y-31.007 I-1.521 J-1.184 E.07303 G1 X-15.681 Y-31.476 E.02674 G2 X-17.647 Y-32.168 I-1.521 J1.184 E.07303 G1 X-18.302 Y-31.699 E.02674 G3 X-20.267 Y-31.007 I-1.521 J-1.184 E.07303 G1 X-20.922 Y-31.476 E.02674 G2 X-22.888 Y-32.168 I-1.521 J1.184 E.07303 G1 X-23.543 Y-31.699 E.02674 G3 X-25.509 Y-31.007 I-1.521 J-1.184 E.07303 G1 X-26.164 Y-31.476 E.02674 G2 X-28.129 Y-32.168 I-1.521 J1.184 E.07303 G1 X-28.784 Y-31.699 E.02674 G3 X-30.75 Y-31.007 I-1.521 J-1.184 E.07303 G1 X-31.405 Y-31.476 E.02674 G2 X-33.37 Y-32.168 I-1.521 J1.184 E.07303 G1 X-34.026 Y-31.699 E.02674 G3 X-35.991 Y-31.007 I-1.521 J-1.184 E.07303 G1 X-36.646 Y-31.476 E.02674 G2 X-38.612 Y-32.168 I-1.521 J1.184 E.07303 G2 X-39.537 Y-31.466 I3.464 J5.525 E.03857 G1 X-39.537 Y-33.904 E.08084 G1 X-39.267 Y-34.097 E.01102 G3 X-37.301 Y-34.789 I1.521 J1.184 E.07303 G1 X-36.646 Y-34.32 E.02674 G2 X-34.681 Y-33.627 I1.521 J-1.184 E.07303 G1 X-34.026 Y-34.097 E.02674 G3 X-32.06 Y-34.789 I1.521 J1.184 E.07303 G1 X-31.405 Y-34.32 E.02674 G2 X-29.44 Y-33.627 I1.521 J-1.184 E.07303 G1 X-28.784 Y-34.097 E.02674 G3 X-26.819 Y-34.789 I1.521 J1.184 E.07303 G1 X-26.164 Y-34.32 E.02674 G2 X-24.198 Y-33.627 I1.521 J-1.184 E.07303 G1 X-23.543 Y-34.097 E.02674 G3 X-21.578 Y-34.789 I1.521 J1.184 E.07303 G1 X-20.922 Y-34.32 E.02674 G2 X-18.957 Y-33.627 I1.521 J-1.184 E.07303 G1 X-18.302 Y-34.097 E.02674 G3 X-16.336 Y-34.789 I1.521 J1.184 E.07303 G1 X-15.681 Y-34.32 E.02674 G2 X-13.716 Y-33.627 I1.521 J-1.184 E.07303 G1 X-13.06 Y-34.097 E.02674 G3 X-11.095 Y-34.789 I1.521 J1.184 E.07303 G1 X-10.44 Y-34.32 E.02674 G2 X-8.474 Y-33.627 I1.521 J-1.184 E.07303 G1 X-7.819 Y-34.097 E.02674 G3 X-5.854 Y-34.789 I1.521 J1.184 E.07303 G1 X-5.198 Y-34.32 E.02674 G2 X-3.233 Y-33.627 I1.521 J-1.184 E.07303 G1 X-2.578 Y-34.097 E.02674 G3 X-.612 Y-34.789 I1.521 J1.184 E.07303 G1 X.043 Y-34.32 E.02674 G2 X2.008 Y-33.627 I1.521 J-1.184 E.07303 G1 X2.663 Y-34.097 E.02674 G3 X4.629 Y-34.789 I1.521 J1.184 E.07303 G1 X5.284 Y-34.32 E.02674 G2 X7.25 Y-33.627 I1.521 J-1.184 E.07303 G1 X7.905 Y-34.097 E.02674 G3 X9.87 Y-34.789 I1.521 J1.184 E.07303 G1 X10.525 Y-34.32 E.02674 G2 X12.491 Y-33.627 I1.521 J-1.184 E.07303 G1 X13.146 Y-34.097 E.02674 G3 X15.112 Y-34.789 I1.521 J1.184 E.07303 G1 X15.767 Y-34.32 E.02674 G2 X17.732 Y-33.627 I1.521 J-1.184 E.07303 G2 X18.937 Y-34.57 I-4.67 J-7.209 E.05081 G1 X18.937 Y-36.198 E.05401 G1 X18.937 Y-46.188 F30000 G1 F16200 G1 X18.937 Y-47.817 E.05401 G2 X17.732 Y-46.859 I4.756 J7.217 E.05112 G3 X15.767 Y-47.2 I-.756 J-1.475 E.07101 G1 X15.112 Y-47.764 E.02868 G2 X13.146 Y-47.423 I-.756 J1.475 E.07101 G1 X12.491 Y-46.859 E.02868 G3 X10.525 Y-47.2 I-.756 J-1.475 E.07101 G1 X9.87 Y-47.764 E.02868 G2 X7.905 Y-47.423 I-.756 J1.475 E.07101 G1 X7.25 Y-46.859 E.02868 G3 X5.284 Y-47.2 I-.756 J-1.475 E.07101 G1 X4.629 Y-47.764 E.02868 G2 X2.663 Y-47.423 I-.756 J1.475 E.07101 G1 X2.008 Y-46.859 E.02868 G3 X.043 Y-47.2 I-.756 J-1.475 E.07101 G1 X-.612 Y-47.764 E.02868 G2 X-2.578 Y-47.423 I-.756 J1.475 E.07101 G1 X-3.233 Y-46.859 E.02868 G3 X-5.198 Y-47.2 I-.756 J-1.475 E.07101 G1 X-5.854 Y-47.764 E.02868 G2 X-7.819 Y-47.423 I-.756 J1.475 E.07101 G1 X-8.474 Y-46.859 E.02868 G3 X-10.44 Y-47.2 I-.756 J-1.475 E.07101 G1 X-11.095 Y-47.764 E.02868 G2 X-13.06 Y-47.423 I-.756 J1.475 E.07101 G1 X-13.716 Y-46.859 E.02868 G3 X-15.681 Y-47.2 I-.756 J-1.475 E.07101 G1 X-16.336 Y-47.764 E.02868 G2 X-18.302 Y-47.423 I-.756 J1.475 E.07101 G1 X-18.957 Y-46.859 E.02868 G3 X-20.922 Y-47.2 I-.756 J-1.475 E.07101 G1 X-21.578 Y-47.764 E.02868 G2 X-23.543 Y-47.423 I-.756 J1.475 E.07101 G1 X-24.198 Y-46.859 E.02868 G3 X-26.164 Y-47.2 I-.756 J-1.475 E.07101 G1 X-26.819 Y-47.764 E.02868 G2 X-28.784 Y-47.423 I-.756 J1.475 E.07101 G1 X-29.44 Y-46.859 E.02868 G3 X-31.405 Y-47.2 I-.756 J-1.475 E.07101 G1 X-32.06 Y-47.764 E.02868 G2 X-34.026 Y-47.423 I-.756 J1.475 E.07101 G1 X-34.681 Y-46.859 E.02868 G3 X-36.646 Y-47.2 I-.756 J-1.475 E.07101 G1 X-37.301 Y-47.764 E.02868 G2 X-39.267 Y-47.423 I-.756 J1.475 E.07101 G1 X-39.537 Y-47.19 E.01182 G1 X-39.537 Y-49.627 E.08084 G2 X-38.612 Y-50.385 I-3.775 J-5.553 E.03972 G3 X-36.646 Y-50.043 I.756 J1.475 E.07101 G1 X-35.991 Y-49.479 E.02868 G2 X-34.026 Y-49.821 I.756 J-1.475 E.07101 G1 X-33.37 Y-50.385 E.02868 G3 X-31.405 Y-50.043 I.756 J1.475 E.07101 G1 X-30.75 Y-49.479 E.02868 G2 X-28.784 Y-49.821 I.756 J-1.475 E.07101 G1 X-28.129 Y-50.385 E.02868 G3 X-26.164 Y-50.043 I.756 J1.475 E.07101 G1 X-25.509 Y-49.479 E.02868 G2 X-23.543 Y-49.821 I.756 J-1.475 E.07101 G1 X-22.888 Y-50.385 E.02868 G3 X-20.922 Y-50.043 I.756 J1.475 E.07101 G1 X-20.267 Y-49.479 E.02868 G2 X-18.302 Y-49.821 I.756 J-1.475 E.07101 G1 X-17.647 Y-50.385 E.02868 G3 X-15.681 Y-50.043 I.756 J1.475 E.07101 G1 X-15.026 Y-49.479 E.02868 G2 X-13.06 Y-49.821 I.756 J-1.475 E.07101 G1 X-12.405 Y-50.385 E.02868 G3 X-10.44 Y-50.043 I.756 J1.475 E.07101 G1 X-9.785 Y-49.479 E.02868 G2 X-7.819 Y-49.821 I.756 J-1.475 E.07101 G1 X-7.164 Y-50.385 E.02868 G3 X-5.198 Y-50.043 I.756 J1.475 E.07101 G1 X-4.543 Y-49.479 E.02868 G2 X-2.578 Y-49.821 I.756 J-1.475 E.07101 G1 X-1.923 Y-50.385 E.02868 G3 X.043 Y-50.043 I.756 J1.475 E.07101 G1 X.698 Y-49.479 E.02868 G2 X2.663 Y-49.821 I.756 J-1.475 E.07101 G1 X3.319 Y-50.385 E.02868 G3 X5.284 Y-50.043 I.756 J1.475 E.07101 G1 X5.939 Y-49.479 E.02868 G2 X7.905 Y-49.821 I.756 J-1.475 E.07101 G1 X8.56 Y-50.385 E.02868 G3 X10.525 Y-50.043 I.756 J1.475 E.07101 G1 X11.181 Y-49.479 E.02868 G2 X13.146 Y-49.821 I.756 J-1.475 E.07101 G1 X13.801 Y-50.385 E.02868 G3 X15.767 Y-50.043 I.756 J1.475 E.07101 G1 X16.422 Y-49.479 E.02868 G2 X18.387 Y-49.821 I.756 J-1.475 E.07101 G1 X18.937 Y-50.294 E.02406 G1 X18.937 Y-51.922 E.05401 G1 X14.963 Y-54.144 F30000 G1 F16200 G1 X14.963 Y-55.772 E.05401 G1 X15.112 Y-55.754 E.00496 G1 X15.767 Y-55.285 E.02674 G2 X17.732 Y-54.593 I1.521 J-1.184 E.07303 G1 X18.387 Y-55.062 E.02674 G3 X20.353 Y-55.754 I1.521 J1.184 E.07303 G1 X21.008 Y-55.285 E.02674 G2 X22.974 Y-54.593 I1.521 J-1.184 E.07303 G1 X23.629 Y-55.062 E.02674 G3 X25.594 Y-55.754 I1.521 J1.184 E.07303 G1 X26.249 Y-55.285 E.02674 G2 X28.215 Y-54.593 I1.521 J-1.184 E.07303 G1 X28.87 Y-55.062 E.02674 G3 X30.835 Y-55.754 I1.521 J1.184 E.07303 G1 X30.937 Y-55.682 E.00414 G1 X30.937 Y-58.16 E.0822 G2 X29.525 Y-58.375 I-.966 J1.599 E.04861 G1 X28.87 Y-57.905 E.02674 G3 X26.905 Y-57.213 I-1.521 J-1.184 E.07303 G1 X26.249 Y-57.683 E.02674 G2 X24.284 Y-58.375 I-1.521 J1.184 E.07303 G1 X23.629 Y-57.905 E.02674 G3 X21.663 Y-57.213 I-1.521 J-1.184 E.07303 G1 X21.008 Y-57.683 E.02674 G2 X19.043 Y-58.375 I-1.521 J1.184 E.07303 G1 X18.387 Y-57.905 E.02674 G3 X16.422 Y-57.213 I-1.521 J-1.184 E.07303 G3 X15.112 Y-58.247 I5.127 J-7.846 E.05544 G1 X14.963 Y-58.294 E.00516 G1 X14.963 Y-59.737 E.04787 G1 X15.148 Y-59.737 E.00614 G1 X14.549 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X6.851 Y-60 E.19 G1 X6.437 Y-58.782 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X6.437 Y-57.154 E.05401 G1 X5.939 Y-57.213 E.01662 G1 X5.284 Y-57.683 E.02674 G2 X3.319 Y-58.375 I-1.521 J1.184 E.07303 G1 X2.663 Y-57.905 E.02674 G3 X.698 Y-57.213 I-1.521 J-1.184 E.07303 G1 X.043 Y-57.683 E.02674 G2 X-1.923 Y-58.375 I-1.521 J1.184 E.07303 G1 X-2.578 Y-57.905 E.02674 G3 X-4.543 Y-57.213 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-57.683 E.02674 G2 X-7.164 Y-58.375 I-1.521 J1.184 E.07303 G1 X-7.819 Y-57.905 E.02674 G3 X-9.785 Y-57.213 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-57.683 E.02674 G2 X-12.405 Y-58.375 I-1.521 J1.184 E.07303 G1 X-13.06 Y-57.905 E.02674 G3 X-15.026 Y-57.213 I-1.521 J-1.184 E.07303 G1 X-15.681 Y-57.683 E.02674 G2 X-17.647 Y-58.375 I-1.521 J1.184 E.07303 G1 X-18.302 Y-57.905 E.02674 G3 X-20.267 Y-57.213 I-1.521 J-1.184 E.07303 G1 X-20.922 Y-57.683 E.02674 G2 X-22.888 Y-58.375 I-1.521 J1.184 E.07303 G1 X-23.543 Y-57.905 E.02674 G3 X-25.509 Y-57.213 I-1.521 J-1.184 E.07303 G3 X-26.819 Y-58.247 I5.127 J-7.846 E.05544 G1 X-27.037 Y-58.316 E.00758 G1 X-27.037 Y-55.78 E.0841 G1 X-26.819 Y-55.754 E.00728 G1 X-26.164 Y-55.285 E.02674 G2 X-24.198 Y-54.593 I1.521 J-1.184 E.07303 G1 X-23.543 Y-55.062 E.02674 G3 X-21.578 Y-55.754 I1.521 J1.184 E.07303 G1 X-20.922 Y-55.285 E.02674 G2 X-18.957 Y-54.593 I1.521 J-1.184 E.07303 G1 X-18.302 Y-55.062 E.02674 G3 X-16.336 Y-55.754 I1.521 J1.184 E.07303 G1 X-15.681 Y-55.285 E.02674 G2 X-13.716 Y-54.593 I1.521 J-1.184 E.07303 G1 X-13.06 Y-55.062 E.02674 G3 X-11.095 Y-55.754 I1.521 J1.184 E.07303 G1 X-10.44 Y-55.285 E.02674 G2 X-8.474 Y-54.593 I1.521 J-1.184 E.07303 G1 X-7.819 Y-55.062 E.02674 G3 X-5.854 Y-55.754 I1.521 J1.184 E.07303 G1 X-5.198 Y-55.285 E.02674 G2 X-3.233 Y-54.593 I1.521 J-1.184 E.07303 G1 X-2.578 Y-55.062 E.02674 G3 X-.612 Y-55.754 I1.521 J1.184 E.07303 G1 X.043 Y-55.285 E.02674 G2 X2.008 Y-54.593 I1.521 J-1.184 E.07303 G1 X2.663 Y-55.062 E.02674 G3 X4.629 Y-55.754 I1.521 J1.184 E.07303 G3 X5.939 Y-54.721 I-5.127 J7.846 E.05544 G1 X6.437 Y-54.564 E.0173 G1 X6.437 Y-52.936 E.05401 G1 X29.964 Y-52.263 F30000 G1 F16200 G1 X30.937 Y-52.263 E.03228 G1 X30.937 Y-52.918 E.02174 G2 X29.525 Y-53.134 I-.966 J1.599 E.04861 G2 X28.404 Y-52.263 I4.308 J6.704 E.04714 G1 X26.498 Y-52.263 E.06323 G1 X26.249 Y-52.442 E.01016 G2 X24.284 Y-53.134 I-1.521 J1.184 E.07303 G2 X23.163 Y-52.263 I4.308 J6.704 E.04714 G1 X21.257 Y-52.263 E.06323 G1 X21.008 Y-52.442 E.01016 G2 X19.043 Y-53.134 I-1.521 J1.184 E.07303 G1 X18.387 Y-52.664 E.02674 G3 X16.422 Y-51.972 I-1.521 J-1.184 E.07303 G3 X15.112 Y-53.006 I5.127 J-7.846 E.05544 G1 X14.963 Y-53.052 E.00516 G1 X14.963 Y-52.737 E.01047 G1 X13.248 Y-52.737 E.05691 G1 X13.146 Y-52.664 E.00414 G3 X11.181 Y-51.972 I-1.521 J-1.184 E.07303 G3 X10.182 Y-52.737 I3.779 J-5.965 E.04177 G1 X8.006 Y-52.737 E.07219 G1 X7.905 Y-52.664 E.00414 G3 X5.939 Y-51.972 I-1.521 J-1.184 E.07303 G1 X5.284 Y-52.442 E.02674 G2 X3.319 Y-53.134 I-1.521 J1.184 E.07303 G1 X2.663 Y-52.664 E.02674 G3 X.698 Y-51.972 I-1.521 J-1.184 E.07303 G1 X.043 Y-52.442 E.02674 G2 X-1.923 Y-53.134 I-1.521 J1.184 E.07303 G1 X-2.578 Y-52.664 E.02674 G3 X-4.543 Y-51.972 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-52.442 E.02674 G2 X-7.164 Y-53.134 I-1.521 J1.184 E.07303 G1 X-7.819 Y-52.664 E.02674 G3 X-9.785 Y-51.972 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-52.442 E.02674 G2 X-12.405 Y-53.134 I-1.521 J1.184 E.07303 G1 X-13.06 Y-52.664 E.02674 G3 X-15.026 Y-51.972 I-1.521 J-1.184 E.07303 G1 X-15.681 Y-52.442 E.02674 G2 X-17.647 Y-53.134 I-1.521 J1.184 E.07303 G1 X-18.302 Y-52.664 E.02674 G3 X-20.267 Y-51.972 I-1.521 J-1.184 E.07303 G1 X-20.922 Y-52.442 E.02674 G2 X-22.888 Y-53.134 I-1.521 J1.184 E.07303 G1 X-23.543 Y-52.664 E.02674 G3 X-25.509 Y-51.972 I-1.521 J-1.184 E.07303 G3 X-26.819 Y-53.006 I5.127 J-7.846 E.05544 G1 X-27.037 Y-53.074 E.00758 G1 X-27.037 Y-52.737 E.01119 G1 X-28.683 Y-52.737 E.0546 G1 X-28.784 Y-52.664 E.00414 G3 X-30.75 Y-51.972 I-1.521 J-1.184 E.07303 G3 X-31.748 Y-52.737 I3.779 J-5.965 E.04177 G1 X-33.924 Y-52.737 E.07219 G1 X-34.026 Y-52.664 E.00414 G3 X-35.991 Y-51.972 I-1.521 J-1.184 E.07303 G1 X-36.646 Y-52.442 E.02674 G2 X-38.612 Y-53.134 I-1.521 J1.184 E.07303 G2 X-39.733 Y-52.263 I4.308 J6.704 E.04714 G1 X-41.639 Y-52.263 E.06323 G1 X-41.888 Y-52.442 E.01016 G2 X-43.853 Y-53.134 I-1.521 J1.184 E.07303 G2 X-44.974 Y-52.263 I4.308 J6.704 E.04714 G1 X-46.88 Y-52.263 E.06323 G1 X-47.129 Y-52.442 E.01016 G2 X-49.094 Y-53.134 I-1.521 J1.184 E.07303 G2 X-50.215 Y-52.263 I4.309 J6.704 E.04714 G1 X-51.537 Y-52.263 E.04384 G1 X-51.537 Y-52.57 E.01017 G1 X-35.563 Y-52.958 F30000 G1 F16200 G1 X-35.563 Y-54.586 E.05401 G1 X-35.991 Y-54.721 E.01488 G2 X-37.301 Y-55.754 I-6.437 J6.812 E.05544 G2 X-39.267 Y-55.062 I-.444 J1.876 E.07303 G1 X-39.922 Y-54.593 E.02674 G3 X-41.888 Y-55.285 I-.444 J-1.876 E.07303 G1 X-42.543 Y-55.754 E.02674 G2 X-44.508 Y-55.062 I-.444 J1.876 E.07303 G1 X-45.163 Y-54.593 E.02674 G3 X-47.129 Y-55.285 I-.444 J-1.876 E.07303 G1 X-47.784 Y-55.754 E.02674 G2 X-49.75 Y-55.062 I-.444 J1.876 E.07303 G1 X-50.405 Y-54.593 E.02674 G3 X-51.537 Y-54.665 I-.486 J-1.293 E.03878 G1 X-51.537 Y-57.192 E.08384 G1 X-51.06 Y-57.135 E.01593 G1 X-50.405 Y-57.341 E.02278 G3 X-49.094 Y-58.375 I6.437 J6.812 E.05544 G3 X-47.129 Y-57.683 I.444 J1.876 E.07303 G1 X-46.474 Y-57.213 E.02674 G2 X-44.508 Y-57.905 I.444 J-1.876 E.07303 G1 X-43.853 Y-58.375 E.02674 G3 X-41.888 Y-57.683 I.444 J1.876 E.07303 G1 X-41.232 Y-57.213 E.02674 G2 X-39.267 Y-57.905 I.444 J-1.876 E.07303 G1 X-38.612 Y-58.375 E.02674 G3 X-36.646 Y-57.683 I.444 J1.876 E.07303 G1 X-35.991 Y-57.213 E.02674 G1 X-35.563 Y-57.162 E.0143 G1 X-35.563 Y-58.791 E.05401 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 X-16.272 Y-41.01 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-15.65 Y-39.534 I-2.44 J1.896 E.05372 G2 X-13.716 Y-38.869 I1.49 J-1.186 E.07165 G1 X-13.06 Y-39.338 E.02674 G3 X-11.095 Y-40.03 I1.521 J1.184 E.07303 G1 X-10.44 Y-39.561 E.02674 G2 X-8.474 Y-38.869 I1.521 J-1.184 E.07303 G1 X-7.819 Y-39.338 E.02674 G3 X-5.854 Y-40.03 I1.521 J1.184 E.07303 G1 X-5.198 Y-39.561 E.02674 G2 X-3.233 Y-38.869 I1.521 J-1.184 E.07303 G1 X-2.578 Y-39.338 E.02674 G3 X-.612 Y-40.03 I1.521 J1.184 E.07303 G1 X.043 Y-39.561 E.02674 G2 X2.008 Y-38.869 I1.521 J-1.184 E.07303 G1 X2.663 Y-39.338 E.02674 G3 X4.629 Y-40.03 I1.521 J1.184 E.07303 G1 X5.284 Y-39.561 E.02674 G2 X7.25 Y-38.869 I1.521 J-1.184 E.07303 G1 X7.905 Y-39.338 E.02674 G3 X9.87 Y-40.03 I1.521 J1.184 E.07303 G1 X10.525 Y-39.561 E.02674 G2 X12.491 Y-38.869 I1.521 J-1.184 E.07303 G1 X13.146 Y-39.338 E.02674 G3 X15.112 Y-40.03 I1.521 J1.184 E.07303 G1 X15.767 Y-39.561 E.02674 G2 X17.732 Y-38.869 I1.521 J-1.184 E.07303 G2 X18.937 Y-39.811 I-4.67 J-7.209 E.05081 G1 X18.937 Y-37.334 E.08218 G1 X18.387 Y-36.94 E.02243 G3 X16.422 Y-36.248 I-1.521 J-1.184 E.07303 G1 X15.767 Y-36.718 E.02674 G2 X13.801 Y-37.41 I-1.521 J1.184 E.07303 G1 X13.146 Y-36.94 E.02674 G3 X11.181 Y-36.248 I-1.521 J-1.184 E.07303 G1 X10.525 Y-36.718 E.02674 G2 X8.56 Y-37.41 I-1.521 J1.184 E.07303 G1 X7.905 Y-36.94 E.02674 G3 X5.939 Y-36.248 I-1.521 J-1.184 E.07303 G1 X5.284 Y-36.718 E.02674 G2 X3.319 Y-37.41 I-1.521 J1.184 E.07303 G1 X2.663 Y-36.94 E.02674 G3 X.698 Y-36.248 I-1.521 J-1.184 E.07303 G1 X.043 Y-36.718 E.02674 G2 X-1.923 Y-37.41 I-1.521 J1.184 E.07303 G1 X-2.578 Y-36.94 E.02674 G3 X-4.543 Y-36.248 I-1.521 J-1.184 E.07303 G1 X-5.198 Y-36.718 E.02674 G2 X-7.164 Y-37.41 I-1.521 J1.184 E.07303 G1 X-7.819 Y-36.94 E.02674 G3 X-9.785 Y-36.248 I-1.521 J-1.184 E.07303 G1 X-10.44 Y-36.718 E.02674 G2 X-12.405 Y-37.41 I-1.521 J1.184 E.07303 G1 X-13.06 Y-36.94 E.02674 G3 X-15.026 Y-36.248 I-1.521 J-1.184 E.07303 G3 X-16.336 Y-37.282 I5.127 J-7.846 E.05544 G1 X-16.496 Y-37.332 E.00555 G3 X-18.645 Y-36.645 I-1.819 J-1.986 E.07722 G3 X-20.267 Y-36.248 I-1.173 J-1.283 E.0578 G1 X-20.922 Y-36.718 E.02674 G2 X-22.888 Y-37.41 I-1.521 J1.184 E.07303 G1 X-23.543 Y-36.94 E.02674 G3 X-25.509 Y-36.248 I-1.521 J-1.184 E.07303 G1 X-26.164 Y-36.718 E.02674 G2 X-28.129 Y-37.41 I-1.521 J1.184 E.07303 G1 X-28.784 Y-36.94 E.02674 G3 X-30.75 Y-36.248 I-1.521 J-1.184 E.07303 G1 X-31.405 Y-36.718 E.02674 G2 X-33.37 Y-37.41 I-1.521 J1.184 E.07303 G1 X-34.026 Y-36.94 E.02674 G3 X-35.991 Y-36.248 I-1.521 J-1.184 E.07303 G1 X-36.144 Y-36.357 E.00623 G3 X-38.561 Y-37.416 I-.079 J-3.11 E.0904 G2 X-39.537 Y-36.708 I3.161 J5.382 E.04005 G1 X-39.537 Y-35.079 E.05401 G1 X-39.285 Y-38.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465138 G1 F12000 G1 X-39.333 Y-38.461 E.0101 ;WIDTH:0.441845 G3 X-39.356 Y-38.68 I3.32 J-.452 E.00717 ;WIDTH:0.401235 G1 X-39.375 Y-38.872 E.00563 ;WIDTH:0.366946 G3 X-39.376 Y-39.682 I8.954 J-.421 E.02139 ;WIDTH:0.399137 G3 X-39.356 Y-39.896 I3.283 J.204 E.00624 ;WIDTH:0.439026 G1 X-39.337 Y-40.088 E.00622 ;WIDTH:0.475339 G3 X-39.285 Y-40.405 I4.892 J.631 E.01132 G1 X-38.311 Y-41.427 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-36.884 Y-42.164 I2.019 J2.16 E.05395 G2 X-38.612 Y-42.651 I-1.279 J1.23 E.06242 G2 X-39.537 Y-41.949 I3.464 J5.525 E.03857 G1 X-39.537 Y-44.386 E.08084 G2 X-38.612 Y-45.144 I-3.775 J-5.553 E.03972 G3 X-36.646 Y-44.802 I.756 J1.475 E.07101 G1 X-35.991 Y-44.238 E.02868 G2 X-34.026 Y-44.58 I.756 J-1.475 E.07101 G1 X-33.37 Y-45.144 E.02868 G3 X-31.405 Y-44.802 I.756 J1.475 E.07101 G1 X-30.75 Y-44.238 E.02868 G2 X-28.784 Y-44.58 I.756 J-1.475 E.07101 G1 X-28.129 Y-45.144 E.02868 G3 X-26.164 Y-44.802 I.756 J1.475 E.07101 G1 X-25.509 Y-44.238 E.02868 G2 X-23.543 Y-44.58 I.756 J-1.475 E.07101 G1 X-22.888 Y-45.144 E.02868 G3 X-20.922 Y-44.802 I.756 J1.475 E.07101 G1 X-20.267 Y-44.238 E.02868 G2 X-18.302 Y-44.58 I.756 J-1.475 E.07101 G1 X-17.647 Y-45.144 E.02868 G3 X-15.681 Y-44.802 I.756 J1.475 E.07101 G1 X-15.026 Y-44.238 E.02868 G2 X-13.06 Y-44.58 I.756 J-1.475 E.07101 G1 X-12.405 Y-45.144 E.02868 G3 X-10.44 Y-44.802 I.756 J1.475 E.07101 G1 X-9.785 Y-44.238 E.02868 G2 X-7.819 Y-44.58 I.756 J-1.475 E.07101 G1 X-7.164 Y-45.144 E.02868 G3 X-5.198 Y-44.802 I.756 J1.475 E.07101 G1 X-4.543 Y-44.238 E.02868 G2 X-2.578 Y-44.58 I.756 J-1.475 E.07101 G1 X-1.923 Y-45.144 E.02868 G3 X.043 Y-44.802 I.756 J1.475 E.07101 G1 X.698 Y-44.238 E.02868 G2 X2.663 Y-44.58 I.756 J-1.475 E.07101 G1 X3.319 Y-45.144 E.02868 G3 X5.284 Y-44.802 I.756 J1.475 E.07101 G1 X5.939 Y-44.238 E.02868 G2 X7.905 Y-44.58 I.756 J-1.475 E.07101 G1 X8.56 Y-45.144 E.02868 G3 X10.525 Y-44.802 I.756 J1.475 E.07101 G1 X11.181 Y-44.238 E.02868 G2 X13.146 Y-44.58 I.756 J-1.475 E.07101 G1 X13.801 Y-45.144 E.02868 G3 X15.767 Y-44.802 I.756 J1.475 E.07101 G1 X16.422 Y-44.238 E.02868 G2 X18.387 Y-44.58 I.756 J-1.475 E.07101 G1 X18.937 Y-45.053 E.02406 G1 X18.937 Y-42.575 E.08218 G2 X17.732 Y-41.617 I4.756 J7.217 E.05112 G3 X15.767 Y-41.959 I-.756 J-1.475 E.07101 G1 X15.112 Y-42.523 E.02868 G2 X13.146 Y-42.182 I-.756 J1.475 E.07101 G1 X12.491 Y-41.617 E.02868 G3 X10.525 Y-41.959 I-.756 J-1.475 E.07101 G1 X9.87 Y-42.523 E.02868 G2 X7.905 Y-42.182 I-.756 J1.475 E.07101 G1 X7.25 Y-41.617 E.02868 G3 X5.284 Y-41.959 I-.756 J-1.475 E.07101 G1 X4.629 Y-42.523 E.02868 G2 X2.663 Y-42.182 I-.756 J1.475 E.07101 G1 X2.008 Y-41.617 E.02868 G3 X.043 Y-41.959 I-.756 J-1.475 E.07101 G1 X-.612 Y-42.523 E.02868 G2 X-2.578 Y-42.182 I-.756 J1.475 E.07101 G1 X-3.233 Y-41.617 E.02868 G3 X-5.198 Y-41.959 I-.756 J-1.475 E.07101 G1 X-5.854 Y-42.523 E.02868 G2 X-7.819 Y-42.182 I-.756 J1.475 E.07101 G1 X-8.474 Y-41.617 E.02868 G3 X-10.44 Y-41.959 I-.756 J-1.475 E.07101 G1 X-11.095 Y-42.523 E.02868 G2 X-13.06 Y-42.182 I-.756 J1.475 E.07101 G1 X-13.716 Y-41.617 E.02868 G3 X-15.681 Y-41.959 I-.756 J-1.475 E.07101 G1 X-16.336 Y-42.523 E.02868 G2 X-18.302 Y-42.182 I-.756 J1.475 E.07101 G1 X-18.588 Y-41.935 E.01253 G2 X-19.865 Y-41.442 I.314 J2.714 E.04591 G1 X-20.267 Y-41.489 E.01343 G3 X-21.578 Y-42.523 I5.127 J-7.846 E.05544 G2 X-23.543 Y-42.182 I-.756 J1.475 E.07101 G1 X-24.198 Y-41.617 E.02868 G3 X-26.164 Y-41.959 I-.756 J-1.475 E.07101 G1 X-26.819 Y-42.523 E.02868 G2 X-28.784 Y-42.182 I-.756 J1.475 E.07101 G1 X-29.44 Y-41.617 E.02868 G3 X-31.405 Y-41.959 I-.756 J-1.475 E.07101 G1 X-32.06 Y-42.523 E.02868 G2 X-34.026 Y-42.182 I-.756 J1.475 E.07101 G1 X-34.604 Y-41.684 E.0253 G3 X-33.421 Y-39.859 I-1.704 J2.399 E.07389 G1 X-33.37 Y-39.902 E.00223 G3 X-31.405 Y-39.561 I.756 J1.475 E.07101 G1 X-30.75 Y-38.997 E.02868 G2 X-28.784 Y-39.338 I.756 J-1.475 E.07101 G1 X-28.129 Y-39.902 E.02868 G3 X-26.164 Y-39.561 I.756 J1.475 E.07101 G1 X-25.509 Y-38.997 E.02868 G2 X-23.543 Y-39.338 I.756 J-1.475 E.07101 G1 X-22.888 Y-39.902 E.02868 G3 X-20.947 Y-39.578 I.754 J1.461 E.06999 G2 X-20.634 Y-38.007 I2.702 J.279 E.05396 G1 X-15.956 Y-22.549 F30000 G1 F16200 G3 X-15.655 Y-20.975 I-2.401 J1.275 E.05396 G2 X-13.716 Y-20.652 I1.186 J-1.137 E.0699 G1 X-13.06 Y-21.216 E.02868 G3 X-11.095 Y-21.558 I1.209 J1.133 E.07101 G1 X-10.44 Y-20.994 E.02868 G2 X-8.474 Y-20.652 I1.209 J-1.133 E.07101 G1 X-7.819 Y-21.216 E.02868 G3 X-5.854 Y-21.558 I1.209 J1.133 E.07101 G1 X-5.198 Y-20.994 E.02868 G2 X-3.233 Y-20.652 I1.209 J-1.133 E.07101 G1 X-2.578 Y-21.216 E.02868 G3 X-.612 Y-21.558 I1.209 J1.133 E.07101 G1 X.043 Y-20.994 E.02868 G2 X2.008 Y-20.652 I1.209 J-1.133 E.07101 G1 X2.663 Y-21.216 E.02868 G3 X4.629 Y-21.558 I1.209 J1.133 E.07101 G1 X5.284 Y-20.994 E.02868 G2 X7.25 Y-20.652 I1.209 J-1.133 E.07101 G1 X7.905 Y-21.216 E.02868 G3 X9.87 Y-21.558 I1.209 J1.133 E.07101 G1 X10.525 Y-20.994 E.02868 G2 X12.491 Y-20.652 I1.209 J-1.133 E.07101 G1 X13.146 Y-21.216 E.02868 G3 X15.112 Y-21.558 I1.209 J1.133 E.07101 G1 X15.767 Y-20.994 E.02868 G2 X17.732 Y-20.652 I1.209 J-1.133 E.07101 G3 X18.937 Y-21.61 I5.961 J6.259 E.05112 G1 X18.937 Y-24.088 E.08218 G1 X18.387 Y-23.614 E.02406 G3 X16.422 Y-23.273 I-1.209 J-1.133 E.07101 G1 X15.767 Y-23.837 E.02868 G2 X13.801 Y-24.179 I-1.209 J1.133 E.07101 G1 X13.146 Y-23.614 E.02868 G3 X11.181 Y-23.273 I-1.209 J-1.133 E.07101 G1 X10.525 Y-23.837 E.02868 G2 X8.56 Y-24.179 I-1.209 J1.133 E.07101 G1 X7.905 Y-23.614 E.02868 G3 X5.939 Y-23.273 I-1.209 J-1.133 E.07101 G1 X5.284 Y-23.837 E.02868 G2 X3.319 Y-24.179 I-1.209 J1.133 E.07101 G1 X2.663 Y-23.614 E.02868 G3 X.698 Y-23.273 I-1.209 J-1.133 E.07101 G1 X.043 Y-23.837 E.02868 G2 X-1.923 Y-24.179 I-1.209 J1.133 E.07101 G1 X-2.578 Y-23.614 E.02868 G3 X-4.543 Y-23.273 I-1.209 J-1.133 E.07101 G1 X-5.198 Y-23.837 E.02868 G2 X-7.164 Y-24.179 I-1.209 J1.133 E.07101 G1 X-7.819 Y-23.614 E.02868 G3 X-9.785 Y-23.273 I-1.209 J-1.133 E.07101 M73 P24 R61 G1 X-10.44 Y-23.837 E.02868 G2 X-12.405 Y-24.179 I-1.209 J1.133 E.07101 G1 X-13.06 Y-23.614 E.02868 G3 X-15.026 Y-23.273 I-1.209 J-1.133 E.07101 G1 X-15.681 Y-23.837 E.02868 G2 X-17.647 Y-24.179 I-1.209 J1.133 E.07101 G1 X-17.937 Y-23.928 E.01273 G2 X-20.123 Y-23.227 I-.347 J2.677 E.07864 G1 X-20.267 Y-23.273 E.00501 G1 X-20.922 Y-23.837 E.02868 G2 X-22.888 Y-24.179 I-1.209 J1.133 E.07101 G1 X-23.543 Y-23.614 E.02868 G3 X-25.509 Y-23.273 I-1.209 J-1.133 E.07101 G1 X-26.164 Y-23.837 E.02868 G2 X-28.129 Y-24.179 I-1.209 J1.133 E.07101 G1 X-28.784 Y-23.614 E.02868 G3 X-30.75 Y-23.273 I-1.209 J-1.133 E.07101 G1 X-31.405 Y-23.837 E.02868 G2 X-33.37 Y-24.179 I-1.209 J1.133 E.07101 G3 X-34.288 Y-23.427 I-4.665 J-4.754 E.0394 G3 X-33.385 Y-21.675 I-2.073 J2.177 E.06658 G3 X-32.06 Y-21.558 I.536 J1.481 E.04555 G1 X-31.405 Y-20.994 E.02868 G2 X-29.44 Y-20.652 I1.209 J-1.133 E.07101 G1 X-28.784 Y-21.216 E.02868 G3 X-26.819 Y-21.558 I1.209 J1.133 E.07101 G1 X-26.164 Y-20.994 E.02868 G2 X-24.198 Y-20.652 I1.209 J-1.133 E.07101 G1 X-23.543 Y-21.216 E.02868 G3 X-21.578 Y-21.558 I1.209 J1.133 E.07101 G1 X-20.948 Y-21.016 E.02756 G2 X-20.311 Y-19.547 I3.066 J-.457 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-20.763 Y-20.268 G1 X-20.948 Y-21.016 G1 X-21.235 Y-21.263 ;WIPE_END G1 X-28.853 Y-20.802 Z1.6 F30000 G1 X-39.285 Y-20.171 Z1.6 G1 Z1.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.465141 G1 F12000 G1 X-39.333 Y-20.461 E.0101 ;WIDTH:0.441848 G3 X-39.356 Y-20.68 I3.325 J-.452 E.00717 ;WIDTH:0.401235 G1 X-39.375 Y-20.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-21.682 I8.953 J-.421 E.02139 ;WIDTH:0.399137 G3 X-39.356 Y-21.896 I3.282 J.204 E.00624 ;WIDTH:0.439027 G1 X-39.337 Y-22.088 E.00622 ;WIDTH:0.475339 G3 X-39.285 Y-22.405 I4.888 J.63 E.01132 G1 X-38.434 Y-23.305 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-37.055 Y-24.13 I2.528 J2.661 E.05375 G1 X-37.301 Y-24.306 E.01005 G2 X-39.267 Y-23.614 I-.444 J1.876 E.07303 G1 X-39.537 Y-23.421 E.01102 G1 X-39.537 Y-25.049 E.05401 G1 X-24.624 Y48.263 F30000 G1 F16200 G1 X-25.563 Y48.263 E.03114 G1 X-25.563 Y47.574 E.02287 G1 X-26.164 Y47.143 E.02451 G2 X-28.129 Y46.451 I-1.521 J1.184 E.07303 G1 X-28.784 Y46.921 E.02674 G3 X-30.75 Y47.613 I-1.521 J-1.184 E.07303 G1 X-31.405 Y47.143 E.02674 G2 X-33.37 Y46.451 I-1.521 J1.184 E.07303 G1 X-34.026 Y46.921 E.02674 G3 X-35.991 Y47.613 I-1.521 J-1.184 E.07303 G1 X-36.646 Y47.143 E.02674 G2 X-38.612 Y46.451 I-1.521 J1.184 E.07303 G1 X-39.267 Y46.921 E.02674 G3 X-41.232 Y47.613 I-1.521 J-1.184 E.07303 G3 X-42.537 Y46.584 I5.101 J-7.81 E.05518 G1 X-42.537 Y49.076 E.08266 G1 X-41.888 Y49.541 E.0265 G2 X-39.922 Y50.233 I1.521 J-1.184 E.07303 G1 X-39.267 Y49.764 E.02674 G3 X-37.301 Y49.072 I1.521 J1.184 E.07303 G1 X-36.646 Y49.541 E.02674 G2 X-34.681 Y50.233 I1.521 J-1.184 E.07303 G1 X-34.026 Y49.764 E.02674 G3 X-32.06 Y49.072 I1.521 J1.184 E.07303 G1 X-31.405 Y49.541 E.02674 G2 X-29.44 Y50.233 I1.521 J-1.184 E.07303 G1 X-28.784 Y49.764 E.02674 G3 X-26.819 Y49.072 I1.521 J1.184 E.07303 G1 X-26.164 Y49.541 E.02674 G2 X-24.198 Y50.233 I1.521 J-1.184 E.07303 G1 X-23.543 Y49.764 E.02674 G3 X-21.578 Y49.072 I1.521 J1.184 E.07303 G1 X-20.922 Y49.541 E.02674 G2 X-18.957 Y50.233 I1.521 J-1.184 E.07303 G1 X-18.302 Y49.764 E.02674 G3 X-16.336 Y49.072 I1.521 J1.184 E.07303 G1 X-15.681 Y49.541 E.02674 G2 X-13.716 Y50.233 I1.521 J-1.184 E.07303 G1 X-13.06 Y49.764 E.02674 G3 X-11.095 Y49.072 I1.521 J1.184 E.07303 G1 X-10.44 Y49.541 E.02674 G2 X-8.474 Y50.233 I1.521 J-1.184 E.07303 G1 X-7.819 Y49.764 E.02674 G3 X-5.854 Y49.072 I1.521 J1.184 E.07303 G1 X-5.198 Y49.541 E.02674 G2 X-3.233 Y50.233 I1.521 J-1.184 E.07303 G1 X-2.578 Y49.764 E.02674 G3 X-.612 Y49.072 I1.521 J1.184 E.07303 G1 X.043 Y49.541 E.02674 G2 X2.008 Y50.233 I1.521 J-1.184 E.07303 G1 X2.663 Y49.764 E.02674 G3 X4.629 Y49.072 I1.521 J1.184 E.07303 G1 X5.284 Y49.541 E.02674 G2 X7.25 Y50.233 I1.521 J-1.184 E.07303 G1 X7.905 Y49.764 E.02674 G3 X9.87 Y49.072 I1.521 J1.184 E.07303 G1 X10.525 Y49.541 E.02674 G2 X12.491 Y50.233 I1.521 J-1.184 E.07303 G1 X13.146 Y49.764 E.02674 G3 X15.112 Y49.072 I1.521 J1.184 E.07303 G1 X15.767 Y49.541 E.02674 G2 X17.732 Y50.233 I1.521 J-1.184 E.07303 G1 X18.387 Y49.764 E.02674 G3 X20.353 Y49.072 I1.521 J1.184 E.07303 G3 X21.663 Y50.106 I-5.127 J7.846 E.05544 G1 X21.937 Y50.192 E.00952 G1 X21.937 Y47.645 E.08446 G1 X21.663 Y47.613 E.00914 G1 X21.008 Y47.143 E.02674 G2 X19.043 Y46.451 I-1.521 J1.184 E.07303 G1 X18.387 Y46.921 E.02674 G3 X16.422 Y47.613 I-1.521 J-1.184 E.07303 G1 X15.767 Y47.143 E.02674 G2 X13.801 Y46.451 I-1.521 J1.184 E.07303 G1 X13.146 Y46.921 E.02674 G3 X11.181 Y47.613 I-1.521 J-1.184 E.07303 G1 X10.525 Y47.143 E.02674 G2 X8.56 Y46.451 I-1.521 J1.184 E.07303 G1 X7.905 Y46.921 E.02674 G3 X5.939 Y47.613 I-1.521 J-1.184 E.07303 G3 X4.963 Y46.867 I3.684 J-5.833 E.04081 G1 X4.963 Y48.263 E.04632 G1 X4.731 Y48.263 E.0077 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X4.963 Y48.263 G1 X4.963 Y46.867 G1 X5.258 Y47.093 ;WIPE_END G1 X.967 Y40.781 Z1.6 F30000 G1 X-42.652 Y-23.367 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:1.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.8 I-.258 J1.189 P1 F30000 G1 X49.431 Y-1.644 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.473 Y-1.653 E.00142 G1 X50 Y-1.758 E.01784 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.391 Y-1.637 E.00216 G1 X49.515 Y-1.218 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.558 Y-1.226 E.00132 G1 X50 Y-1.314 E.01386 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01575 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01575 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.479 Y-1.202 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.558 Y-1.226 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.175 Y-.562 ;WIPE_END G1 X50.419 Y-2.111 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50 Y-2.152 I-.419 J2.105 E.43344 G1 X50.379 Y-2.115 E.01263 G1 X50.478 Y-2.542 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.504 Y-2.539 E.0008 G1 X50.991 Y-2.392 E.01563 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.438 Y-2.546 E.01353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.504 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.091 Y-1.514 ;WIPE_END G1 X44.499 Y-.725 Z1.8 F30000 G1 X28.151 Y.972 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.119 Y1.026 E.00194 G3 X25.566 Y-2.091 I-1.929 J-1.024 E.26401 G3 X26.106 Y-2.181 I.65 J2.247 E.01686 G3 X28.281 Y.631 I.084 J2.182 E.12761 G1 X28.166 Y.934 E.00996 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.119 Y1.026 G1 X28.017 Y1.214 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.655 Y2.134 ;WIPE_END G1 X19.203 Y.488 Z1.8 F30000 G1 X7.71 Y-2.052 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.151 J2.165 E.33495 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X10.845 Y3.709 I-.256 J1.974 E.03149 G3 X8.454 Y7.024 I-1.148 J1.692 E.21692 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.56 Y4.262 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.56 Y4.26 E.00008 G3 X8.895 Y4.005 I1.133 J1.142 E.01296 G3 X9.607 Y3.796 I.786 J1.356 E.02303 G3 X8.42 Y4.418 I.086 J1.606 E.26808 G1 X8.533 Y4.292 E.0052 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.56 Y4.26 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.607 Y3.796 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.316 Y3.912 G1 X10.373 Y3.94 ;WIPE_END G1 X3.165 Y6.45 Z1.8 F30000 G1 X-16.248 Y13.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.151 J-2.165 E.33495 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.27 J-2.028 E.24846 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.462 Y8.975 Z1.8 F30000 G1 X-29.16 Y6.537 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.166 Y6.534 E.00021 G3 X-31.105 Y4.005 I-1.141 J-1.133 E.16857 G3 X-30.393 Y3.796 I.786 J1.356 E.02303 G3 X-29.028 Y6.376 I.086 J1.606 E.11242 G1 X-29.134 Y6.506 E.00515 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.166 Y6.534 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.972 Y6.86 ;WIPE_END G1 X-33.014 Y-.494 Z1.8 F30000 G1 X-38.957 Y-21.892 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.94 Y-21.995 E.00347 G3 X-38.23 Y-23.218 I2.632 J.71 E.04744 G3 X-36.511 Y-24.004 I1.911 J1.909 E.06405 G3 X-39.01 Y-21.645 I.203 J2.719 E.44489 G1 X-38.965 Y-21.853 E.00706 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.557 Y-21.813 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.546 Y-21.89 E.00259 G3 X-37.713 Y-23.13 I2.238 J.605 E.05045 G3 X-36.484 Y-23.597 I1.426 J1.899 E.04419 G3 X-38.606 Y-21.592 I.176 J2.312 E.3785 G1 X-38.566 Y-21.774 E.00618 G1 X-38.131 Y-21.728 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.126 Y-21.777 E.00153 G3 X-37.243 Y-22.921 I1.818 J.492 E.04557 G3 X-36.456 Y-23.163 I.919 J1.584 E.02552 G3 X-38.175 Y-21.535 I.148 J1.877 E.28491 G1 X-38.14 Y-21.689 E.00485 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.126 Y-21.777 G1 X-38.042 Y-22.01 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-36.848 Y-23.089 ;WIPE_END G1 X-35.34 Y-30.571 Z1.8 F30000 G1 X-33.803 Y-38.194 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.943 Y-37.927 E.01 G3 X-38.23 Y-41.218 I-2.364 J-1.358 E.30825 G3 X-36.511 Y-42.004 I1.911 J1.909 E.06405 G3 X-33.787 Y-38.247 I.203 J2.719 E.18413 G1 X-33.791 Y-38.233 E.0005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.168 Y-38.374 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.297 Y-38.131 E.00912 G3 X-37.713 Y-41.13 I-2.011 J-1.154 E.27231 G3 X-36.484 Y-41.597 I1.426 J1.899 E.04419 G3 X-34.16 Y-38.413 I.176 J2.312 E.15634 G1 X-34.567 Y-38.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-37.243 Y-40.921 I-1.741 J-.716 E.21999 G3 X-36.456 Y-41.163 I.919 J1.584 E.02552 G3 X-34.553 Y-38.608 I.147 J1.877 E.11674 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.667 Y-38.345 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.042 Y-37.421 ;WIPE_END G1 X-28.573 Y-38.992 Z1.8 F30000 G1 X-20.278 Y-40.737 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.249 Y-40.783 E.00182 G3 X-19.794 Y-41.235 I1.94 J1.498 E.02132 G3 X-18.448 Y-41.733 I1.505 J2.003 E.04828 G3 X-20.428 Y-40.517 I.14 J2.448 E.43065 G1 X-20.3 Y-40.704 E.00751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.511 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.926 Y-40.536 E.00094 G3 X-19.323 Y-41.06 I1.617 J1.25 E.02668 G3 X-18.421 Y-41.327 I.999 J1.722 E.03149 G3 X-20.076 Y-40.313 I.112 J2.041 E.35896 G1 X-19.962 Y-40.478 E.00663 G1 X-19.58 Y-40.27 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-19.105 Y-40.683 I1.273 J.984 E.01945 G3 X-18.393 Y-40.892 I.786 J1.356 E.02303 G3 X-19.604 Y-40.238 I.086 J1.606 E.26686 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.393 Y-40.892 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.821 Y-40.823 ;WIPE_END G1 X-17.07 Y-33.227 Z1.8 F30000 G1 X-15.961 Y-22.017 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.941 Y-21.92 E.00329 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35158 G3 X-18.448 Y-23.733 I1.505 J2.003 E.04828 G3 X-16.043 Y-22.223 I.14 J2.448 E.10045 G1 X-15.976 Y-22.054 E.00602 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.347 Y-21.886 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.335 Y-21.815 E.00241 G3 X-19.323 Y-23.06 I-1.974 J.529 E.30206 G3 X-18.421 Y-23.327 I.999 J1.722 E.03149 G3 X-16.42 Y-22.067 I.112 J2.041 E.08364 G1 X-16.362 Y-21.923 E.00513 G1 X-16.759 Y-21.747 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.754 Y-21.702 E.00137 G3 X-19.105 Y-22.683 I-1.553 J.416 E.2201 G3 X-18.393 Y-22.892 I.786 J1.356 E.02303 G3 X-16.821 Y-21.901 I.086 J1.606 E.06089 G1 X-16.774 Y-21.784 E.00388 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.754 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.32 Y-20.01 G1 X-17.337 Y-19.999 ;WIPE_END G1 X-20.73 Y-13.162 Z1.8 F30000 G1 X-42.748 Y31.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z1.8 F30000 G1 X-42.748 Y51.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z1.8 F30000 G1 X4.752 Y47.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z1.8 F30000 G1 X4.752 Y33.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z1.8 F30000 G1 X27.252 Y31.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z1.8 F30000 G1 X-28.09 Y-52.948 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.945 E.32005 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.945 E.32005 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z1.8 F30000 G1 X7.055 Y-53.79 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z1.8 F30000 G1 X-40.155 Y-5.355 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.444 J1.451 E.19522 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.444 J1.451 E.19522 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.299 Y-2.775 Z1.8 F30000 G1 X-48.774 Y-.918 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.733 Y-1.033 E.00375 G3 X-47.434 Y-2.091 I1.923 J1.035 E.05283 G3 X-46.894 Y-2.181 I.65 J2.247 E.01686 G3 X-48.899 Y-.637 I.084 J2.182 E.33868 G1 X-48.79 Y-.882 E.00824 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.733 Y-1.033 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.314 Y-2.121 ;WIPE_END G1 X-47.176 Y5.51 Z1.8 F30000 G1 X-46.194 Y59.807 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.199 Y59.808 E.00016 G3 X-45.605 Y57.605 I1.391 J-.806 E.0779 G3 X-44.893 Y57.396 I.786 J1.356 E.02303 G3 X-46.081 Y59.983 I.086 J1.606 E.20303 G1 X-46.172 Y59.841 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.199 Y59.808 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.037 Y57.974 ;WIPE_END G1 X-38.408 Y58.177 Z1.8 F30000 G1 X22.806 Y59.807 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.801 Y59.808 E.00016 G3 X23.395 Y57.605 I1.391 J-.806 E.0779 G3 X24.107 Y57.396 I.786 J1.356 E.02303 G3 X22.919 Y59.983 I.086 J1.606 E.20303 G1 X22.828 Y59.841 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.801 Y59.808 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.963 Y57.974 ;WIPE_END G1 X17.575 Y52.568 Z1.8 F30000 G1 X-40.59 Y-5.79 Z1.8 G1 Z1.4 M73 P24 R60 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-46.051 Y-3.148 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-47.661 Y-3.12 I-.743 J3.592 E.05385 G1 X-47.784 Y-3.224 E.00535 G1 X-48.537 Y-3.405 E.02568 G1 X-48.537 Y-4.737 E.04419 G1 X-39.537 Y-4.737 E.29855 G1 X-39.537 Y-5.094 E.01185 G2 X-38.612 Y-5.845 I-4.727 J-6.771 E.03955 G3 X-36.646 Y-5.471 I.731 J1.51 E.07111 G1 X-35.991 Y-4.917 E.02846 G2 X-34.026 Y-5.291 I.731 J-1.51 E.07111 G1 X-33.37 Y-5.845 E.02846 G3 X-31.405 Y-5.471 I.731 J1.51 E.07111 G1 X-30.75 Y-4.917 E.02846 G2 X-28.784 Y-5.291 I.731 J-1.51 E.07111 G1 X-28.129 Y-5.845 E.02846 G3 X-26.164 Y-5.471 I.731 J1.51 E.07111 G1 X-25.509 Y-4.917 E.02846 G2 X-23.543 Y-5.291 I.731 J-1.51 E.07111 G1 X-22.888 Y-5.845 E.02846 G3 X-20.922 Y-5.471 I.731 J1.51 E.07111 G1 X-20.267 Y-4.917 E.02846 G2 X-18.302 Y-5.291 I.731 J-1.51 E.07111 G1 X-17.647 Y-5.845 E.02846 G3 X-15.681 Y-5.471 I.731 J1.51 E.07111 G1 X-15.026 Y-4.917 E.02846 G2 X-13.06 Y-5.291 I.731 J-1.51 E.07111 G1 X-12.405 Y-5.845 E.02846 G3 X-10.44 Y-5.471 I.731 J1.51 E.07111 G1 X-9.785 Y-4.917 E.02846 G2 X-7.819 Y-5.291 I.731 J-1.51 E.07111 G1 X-7.164 Y-5.845 E.02846 G3 X-5.198 Y-5.471 I.731 J1.51 E.07111 G1 X-4.543 Y-4.917 E.02846 G2 X-2.578 Y-5.291 I.731 J-1.51 E.07111 G1 X-1.923 Y-5.845 E.02846 G3 X.043 Y-5.471 I.731 J1.51 E.07111 G1 X.698 Y-4.917 E.02846 G2 X2.663 Y-5.291 I.731 J-1.51 E.07111 G1 X3.319 Y-5.845 E.02846 G3 X5.284 Y-5.471 I.731 J1.51 E.07111 G1 X5.939 Y-4.917 E.02846 G2 X7.905 Y-5.291 I.731 J-1.51 E.07111 G1 X8.56 Y-5.845 E.02846 G3 X10.525 Y-5.471 I.731 J1.51 E.07111 G1 X11.181 Y-4.917 E.02846 G2 X13.146 Y-5.291 I.731 J-1.51 E.07111 G1 X13.801 Y-5.845 E.02846 G3 X15.767 Y-5.471 I.731 J1.51 E.07111 G1 X16.422 Y-4.917 E.02846 G2 X18.387 Y-5.291 I.731 J-1.51 E.07111 G1 X18.937 Y-5.756 E.02387 G1 X18.937 Y-8.492 E.09079 G2 X17.732 Y-7.538 I5.996 J8.805 E.05103 G3 X15.767 Y-7.912 I-.731 J-1.51 E.07111 G1 X15.112 Y-8.466 E.02846 G2 X13.146 Y-8.092 I-.731 J1.51 E.07111 G1 X12.491 Y-7.538 E.02846 G3 X10.525 Y-7.912 I-.731 J-1.51 E.07111 G1 X9.87 Y-8.466 E.02846 G2 X7.905 Y-8.092 I-.731 J1.51 E.07111 G1 X7.25 Y-7.538 E.02846 G3 X5.284 Y-7.912 I-.731 J-1.51 E.07111 G1 X4.629 Y-8.466 E.02846 G2 X2.663 Y-8.092 I-.731 J1.51 E.07111 G1 X2.008 Y-7.538 E.02846 G3 X.043 Y-7.912 I-.731 J-1.51 E.07111 G1 X-.612 Y-8.466 E.02846 G2 X-2.578 Y-8.092 I-.731 J1.51 E.07111 G1 X-3.233 Y-7.538 E.02846 G3 X-5.198 Y-7.912 I-.731 J-1.51 E.07111 G1 X-5.854 Y-8.466 E.02846 G2 X-7.819 Y-8.092 I-.731 J1.51 E.07111 G1 X-8.474 Y-7.538 E.02846 G3 X-10.44 Y-7.912 I-.731 J-1.51 E.07111 G1 X-11.095 Y-8.466 E.02846 G2 X-13.06 Y-8.092 I-.731 J1.51 E.07111 G1 X-13.716 Y-7.538 E.02846 G3 X-15.681 Y-7.912 I-.731 J-1.51 E.07111 G1 X-16.336 Y-8.466 E.02846 G2 X-18.302 Y-8.092 I-.731 J1.51 E.07111 G1 X-18.957 Y-7.538 E.02846 G3 X-20.922 Y-7.912 I-.731 J-1.51 E.07111 G1 X-21.578 Y-8.466 E.02846 G2 X-23.543 Y-8.092 I-.731 J1.51 E.07111 G1 X-24.198 Y-7.538 E.02846 G3 X-26.164 Y-7.912 I-.731 J-1.51 E.07111 G1 X-26.819 Y-8.466 E.02846 G2 X-28.784 Y-8.092 I-.731 J1.51 E.07111 G1 X-29.44 Y-7.538 E.02846 G3 X-31.405 Y-7.912 I-.731 J-1.51 E.07111 G1 X-32.06 Y-8.466 E.02846 G2 X-34.026 Y-8.092 I-.731 J1.51 E.07111 G1 X-34.681 Y-7.538 E.02846 G3 X-36.646 Y-7.912 I-.731 J-1.51 E.07111 G1 X-37.301 Y-8.466 E.02846 G2 X-39.267 Y-8.092 I-.731 J1.51 E.07111 G1 X-39.537 Y-7.864 E.01173 G1 X-39.537 Y-10.336 E.08199 G2 X-38.612 Y-11.086 I-4.727 J-6.771 E.03955 G3 X-36.646 Y-10.713 I.731 J1.51 E.07111 G1 X-35.991 Y-10.159 E.02846 G2 X-34.026 Y-10.532 I.731 J-1.51 E.07111 G1 X-33.37 Y-11.086 E.02846 G3 X-31.405 Y-10.713 I.731 J1.51 E.07111 G1 X-30.75 Y-10.159 E.02846 G2 X-28.784 Y-10.532 I.731 J-1.51 E.07111 G1 X-28.129 Y-11.086 E.02846 G3 X-26.164 Y-10.713 I.731 J1.51 E.07111 G1 X-25.509 Y-10.159 E.02846 G2 X-23.543 Y-10.532 I.731 J-1.51 E.07111 G1 X-22.888 Y-11.086 E.02846 G3 X-20.922 Y-10.713 I.731 J1.51 E.07111 G1 X-20.267 Y-10.159 E.02846 G2 X-18.302 Y-10.532 I.731 J-1.51 E.07111 G1 X-17.647 Y-11.086 E.02846 G3 X-15.681 Y-10.713 I.731 J1.51 E.07111 G1 X-15.026 Y-10.159 E.02846 G2 X-13.06 Y-10.532 I.731 J-1.51 E.07111 G1 X-12.405 Y-11.086 E.02846 G3 X-10.44 Y-10.713 I.731 J1.51 E.07111 G1 X-9.785 Y-10.159 E.02846 G2 X-7.819 Y-10.532 I.731 J-1.51 E.07111 G1 X-7.164 Y-11.086 E.02846 G3 X-5.198 Y-10.713 I.731 J1.51 E.07111 G1 X-4.543 Y-10.159 E.02846 G2 X-2.578 Y-10.532 I.731 J-1.51 E.07111 G1 X-1.923 Y-11.086 E.02846 G3 X.043 Y-10.713 I.731 J1.51 E.07111 G1 X.698 Y-10.159 E.02846 G2 X2.663 Y-10.532 I.731 J-1.51 E.07111 G1 X3.319 Y-11.086 E.02846 G3 X5.284 Y-10.713 I.731 J1.51 E.07111 G1 X5.939 Y-10.159 E.02846 G2 X7.905 Y-10.532 I.731 J-1.51 E.07111 G1 X8.56 Y-11.086 E.02846 G3 X10.525 Y-10.713 I.731 J1.51 E.07111 G1 X11.181 Y-10.159 E.02846 G2 X13.146 Y-10.532 I.731 J-1.51 E.07111 G1 X13.801 Y-11.086 E.02846 G3 X15.767 Y-10.713 I.731 J1.51 E.07111 G1 X16.422 Y-10.159 E.02846 G2 X18.387 Y-10.532 I.731 J-1.51 E.07111 G1 X18.937 Y-10.997 E.02387 G1 X18.937 Y-13.734 E.09079 G2 X17.732 Y-12.779 I5.996 J8.806 E.05103 G3 X15.767 Y-13.153 I-.731 J-1.51 E.07111 G1 X15.112 Y-13.707 E.02846 G2 X13.146 Y-13.333 I-.731 J1.51 E.07111 G1 X12.491 Y-12.779 E.02846 G3 X10.525 Y-13.153 I-.731 J-1.51 E.07111 G1 X9.87 Y-13.707 E.02846 G2 X7.905 Y-13.333 I-.731 J1.51 E.07111 G1 X7.25 Y-12.779 E.02846 G3 X5.284 Y-13.153 I-.731 J-1.51 E.07111 G1 X4.629 Y-13.707 E.02846 G2 X2.663 Y-13.333 I-.731 J1.51 E.07111 G1 X2.008 Y-12.779 E.02846 G3 X.043 Y-13.153 I-.731 J-1.51 E.07111 G1 X-.612 Y-13.707 E.02846 G2 X-2.578 Y-13.333 I-.731 J1.51 E.07111 G1 X-3.233 Y-12.779 E.02846 G3 X-5.198 Y-13.153 I-.731 J-1.51 E.07111 G1 X-5.854 Y-13.707 E.02846 G2 X-7.819 Y-13.333 I-.731 J1.51 E.07111 G1 X-8.474 Y-12.779 E.02846 G3 X-10.44 Y-13.153 I-.731 J-1.51 E.07111 G1 X-11.095 Y-13.707 E.02846 G2 X-13.06 Y-13.333 I-.731 J1.51 E.07111 G1 X-13.716 Y-12.779 E.02846 G3 X-15.681 Y-13.153 I-.731 J-1.51 E.07111 G1 X-16.336 Y-13.707 E.02846 G2 X-18.302 Y-13.333 I-.731 J1.51 E.07111 G1 X-18.957 Y-12.779 E.02846 G3 X-20.922 Y-13.153 I-.731 J-1.51 E.07111 G1 X-21.578 Y-13.707 E.02846 G2 X-23.543 Y-13.333 I-.731 J1.51 E.07111 G1 X-24.198 Y-12.779 E.02846 G3 X-26.164 Y-13.153 I-.731 J-1.51 E.07111 G1 X-26.819 Y-13.707 E.02846 G2 X-28.784 Y-13.333 I-.731 J1.51 E.07111 G1 X-29.44 Y-12.779 E.02846 G3 X-31.405 Y-13.153 I-.731 J-1.51 E.07111 G1 X-32.06 Y-13.707 E.02846 G2 X-34.026 Y-13.333 I-.731 J1.51 E.07111 G1 X-34.681 Y-12.779 E.02846 G3 X-36.646 Y-13.153 I-.731 J-1.51 E.07111 G1 X-37.301 Y-13.707 E.02846 G2 X-39.267 Y-13.333 I-.731 J1.51 E.07111 G1 X-39.537 Y-13.105 E.01173 G1 X-39.537 Y-15.577 E.08199 G2 X-38.612 Y-16.327 I-4.727 J-6.771 E.03955 G3 X-36.646 Y-15.954 I.731 J1.51 E.07111 G1 X-35.991 Y-15.4 E.02846 G2 X-34.026 Y-15.773 I.731 J-1.51 E.07111 G1 X-33.37 Y-16.327 E.02846 G3 X-31.405 Y-15.954 I.731 J1.51 E.07111 G1 X-30.75 Y-15.4 E.02846 G2 X-28.784 Y-15.773 I.731 J-1.51 E.07111 G1 X-28.129 Y-16.327 E.02846 G3 X-26.164 Y-15.954 I.731 J1.51 E.07111 G1 X-25.509 Y-15.4 E.02846 G2 X-23.543 Y-15.773 I.731 J-1.51 E.07111 G1 X-22.888 Y-16.327 E.02846 G3 X-20.922 Y-15.954 I.731 J1.51 E.07111 G1 X-20.267 Y-15.4 E.02846 G2 X-18.302 Y-15.773 I.731 J-1.51 E.07111 G1 X-17.647 Y-16.327 E.02846 G3 X-15.681 Y-15.954 I.731 J1.51 E.07111 G1 X-15.026 Y-15.4 E.02846 G2 X-13.06 Y-15.773 I.731 J-1.51 E.07111 G1 X-12.405 Y-16.327 E.02846 G3 X-10.44 Y-15.954 I.731 J1.51 E.07111 G1 X-9.785 Y-15.4 E.02846 G2 X-7.819 Y-15.773 I.731 J-1.51 E.07111 G1 X-7.164 Y-16.327 E.02846 G3 X-5.198 Y-15.954 I.731 J1.51 E.07111 G1 X-4.543 Y-15.4 E.02846 G2 X-2.578 Y-15.773 I.731 J-1.51 E.07111 G1 X-1.923 Y-16.327 E.02846 G3 X.043 Y-15.954 I.731 J1.51 E.07111 G1 X.698 Y-15.4 E.02846 G2 X2.663 Y-15.773 I.731 J-1.51 E.07111 G1 X3.319 Y-16.327 E.02846 G3 X5.284 Y-15.954 I.731 J1.51 E.07111 G1 X5.939 Y-15.4 E.02846 G2 X7.905 Y-15.773 I.731 J-1.51 E.07111 G1 X8.56 Y-16.327 E.02846 G3 X10.525 Y-15.954 I.731 J1.51 E.07111 G1 X11.181 Y-15.4 E.02846 G2 X13.146 Y-15.773 I.731 J-1.51 E.07111 G1 X13.801 Y-16.327 E.02846 G3 X15.767 Y-15.954 I.731 J1.51 E.07111 G1 X16.422 Y-15.4 E.02846 G2 X18.387 Y-15.773 I.731 J-1.51 E.07111 G1 X18.937 Y-16.238 E.02387 G1 X18.937 Y-17.866 E.05401 G1 X18.937 Y-27.829 F30000 G1 F16200 G1 X18.937 Y-29.458 E.05401 G2 X17.732 Y-28.503 I5.996 J8.805 E.05103 G3 X15.767 Y-28.877 I-.731 J-1.51 E.07111 G1 X15.112 Y-29.431 E.02846 G2 X13.146 Y-29.057 I-.731 J1.51 E.07111 G1 X12.491 Y-28.503 E.02846 G3 X10.525 Y-28.877 I-.731 J-1.51 E.07111 G1 X9.87 Y-29.431 E.02846 G2 X7.905 Y-29.057 I-.731 J1.51 E.07111 G1 X7.25 Y-28.503 E.02846 G3 X5.284 Y-28.877 I-.731 J-1.51 E.07111 G1 X4.629 Y-29.431 E.02846 G2 X2.663 Y-29.057 I-.731 J1.51 E.07111 G1 X2.008 Y-28.503 E.02846 G3 X.043 Y-28.877 I-.731 J-1.51 E.07111 G1 X-.612 Y-29.431 E.02846 G2 X-2.578 Y-29.057 I-.731 J1.51 E.07111 G1 X-3.233 Y-28.503 E.02846 G3 X-5.198 Y-28.877 I-.731 J-1.51 E.07111 G1 X-5.854 Y-29.431 E.02846 G2 X-7.819 Y-29.057 I-.731 J1.51 E.07111 G1 X-8.474 Y-28.503 E.02846 G3 X-10.44 Y-28.877 I-.731 J-1.51 E.07111 G1 X-11.095 Y-29.431 E.02846 G2 X-13.06 Y-29.057 I-.731 J1.51 E.07111 G1 X-13.716 Y-28.503 E.02846 G3 X-15.681 Y-28.877 I-.731 J-1.51 E.07111 G1 X-16.336 Y-29.431 E.02846 G2 X-18.302 Y-29.057 I-.731 J1.51 E.07111 G1 X-18.957 Y-28.503 E.02846 G3 X-20.922 Y-28.877 I-.731 J-1.51 E.07111 G1 X-21.578 Y-29.431 E.02846 G2 X-23.543 Y-29.057 I-.731 J1.51 E.07111 G1 X-24.198 Y-28.503 E.02846 G3 X-26.164 Y-28.877 I-.731 J-1.51 E.07111 G1 X-26.819 Y-29.431 E.02846 G2 X-28.784 Y-29.057 I-.731 J1.51 E.07111 G1 X-29.44 Y-28.503 E.02846 G3 X-31.405 Y-28.877 I-.731 J-1.51 E.07111 G1 X-32.06 Y-29.431 E.02846 G2 X-34.026 Y-29.057 I-.731 J1.51 E.07111 G1 X-34.681 Y-28.503 E.02846 G3 X-36.646 Y-28.877 I-.731 J-1.51 E.07111 G1 X-37.301 Y-29.431 E.02846 G2 X-39.267 Y-29.057 I-.731 J1.51 E.07111 G1 X-39.537 Y-28.829 E.01173 G1 X-39.537 Y-31.301 E.08199 G2 X-38.612 Y-32.051 I-4.727 J-6.771 E.03955 G3 X-36.646 Y-31.678 I.731 J1.51 E.07111 G1 X-35.991 Y-31.124 E.02846 G2 X-34.026 Y-31.497 I.731 J-1.51 E.07111 G1 X-33.37 Y-32.051 E.02846 G3 X-31.405 Y-31.678 I.731 J1.51 E.07111 G1 X-30.75 Y-31.124 E.02846 G2 X-28.784 Y-31.497 I.731 J-1.51 E.07111 G1 X-28.129 Y-32.051 E.02846 G3 X-26.164 Y-31.678 I.731 J1.51 E.07111 G1 X-25.509 Y-31.124 E.02846 G2 X-23.543 Y-31.497 I.731 J-1.51 E.07111 G1 X-22.888 Y-32.051 E.02846 G3 X-20.922 Y-31.678 I.731 J1.51 E.07111 G1 X-20.267 Y-31.124 E.02846 G2 X-18.302 Y-31.497 I.731 J-1.51 E.07111 G1 X-17.647 Y-32.051 E.02846 G3 X-15.681 Y-31.678 I.731 J1.51 E.07111 G1 X-15.026 Y-31.124 E.02846 G2 X-13.06 Y-31.497 I.731 J-1.51 E.07111 G1 X-12.405 Y-32.051 E.02846 G3 X-10.44 Y-31.678 I.731 J1.51 E.07111 G1 X-9.785 Y-31.124 E.02846 G2 X-7.819 Y-31.497 I.731 J-1.51 E.07111 G1 X-7.164 Y-32.051 E.02846 G3 X-5.198 Y-31.678 I.731 J1.51 E.07111 G1 X-4.543 Y-31.124 E.02846 G2 X-2.578 Y-31.497 I.731 J-1.51 E.07111 G1 X-1.923 Y-32.051 E.02846 G3 X.043 Y-31.678 I.731 J1.51 E.07111 G1 X.698 Y-31.124 E.02846 G2 X2.663 Y-31.497 I.731 J-1.51 E.07111 G1 X3.319 Y-32.051 E.02846 G3 X5.284 Y-31.678 I.731 J1.51 E.07111 G1 X5.939 Y-31.124 E.02846 G2 X7.905 Y-31.497 I.731 J-1.51 E.07111 G1 X8.56 Y-32.051 E.02846 G3 X10.525 Y-31.678 I.731 J1.51 E.07111 G1 X11.181 Y-31.124 E.02846 G2 X13.146 Y-31.497 I.731 J-1.51 E.07111 G1 X13.801 Y-32.051 E.02846 G3 X15.767 Y-31.678 I.731 J1.51 E.07111 G1 X16.422 Y-31.124 E.02846 G2 X18.387 Y-31.497 I.731 J-1.51 E.07111 G1 X18.937 Y-31.962 E.02387 G1 X18.937 Y-33.59 E.05401 G1 X18.937 Y-43.553 F30000 G1 F16200 G1 X18.937 Y-45.181 E.05401 G1 X18.387 Y-44.781 E.02255 G3 X16.422 Y-44.123 I-1.487 J-1.178 E.07274 G1 X15.767 Y-44.601 E.02689 G2 X13.801 Y-45.258 I-1.487 J1.178 E.07274 G1 X13.146 Y-44.781 E.02689 G3 X11.181 Y-44.123 I-1.487 J-1.178 E.07274 G1 X10.525 Y-44.601 E.02689 G2 X8.56 Y-45.258 I-1.487 J1.178 E.07274 G1 X7.905 Y-44.781 E.02689 G3 X5.939 Y-44.123 I-1.487 J-1.178 E.07274 G1 X5.284 Y-44.601 E.02689 G2 X3.319 Y-45.258 I-1.487 J1.178 E.07274 G1 X2.663 Y-44.781 E.02689 G3 X.698 Y-44.123 I-1.487 J-1.178 E.07274 G1 X.043 Y-44.601 E.02689 G2 X-1.923 Y-45.258 I-1.487 J1.178 E.07274 G1 X-2.578 Y-44.781 E.02689 G3 X-4.543 Y-44.123 I-1.487 J-1.178 E.07274 G1 X-5.198 Y-44.601 E.02689 G2 X-7.164 Y-45.258 I-1.487 J1.178 E.07274 G1 X-7.819 Y-44.781 E.02689 G3 X-9.785 Y-44.123 I-1.487 J-1.178 E.07274 G1 X-10.44 Y-44.601 E.02689 G2 X-12.405 Y-45.258 I-1.487 J1.178 E.07274 G1 X-13.06 Y-44.781 E.02689 G3 X-15.026 Y-44.123 I-1.487 J-1.178 E.07274 G1 X-15.681 Y-44.601 E.02689 G2 X-17.647 Y-45.258 I-1.487 J1.178 E.07274 G1 X-18.302 Y-44.781 E.02689 G3 X-20.267 Y-44.123 I-1.487 J-1.178 E.07274 G1 X-20.922 Y-44.601 E.02689 G2 X-22.888 Y-45.258 I-1.487 J1.178 E.07274 G1 X-23.543 Y-44.781 E.02689 G3 X-25.509 Y-44.123 I-1.487 J-1.178 E.07274 G1 X-26.164 Y-44.601 E.02689 G2 X-28.129 Y-45.258 I-1.487 J1.178 E.07274 G1 X-28.784 Y-44.781 E.02689 G3 X-30.75 Y-44.123 I-1.487 J-1.178 E.07274 G1 X-31.405 Y-44.601 E.02689 G2 X-33.37 Y-45.258 I-1.487 J1.178 E.07274 G1 X-34.026 Y-44.781 E.02689 G3 X-35.991 Y-44.123 I-1.487 J-1.178 E.07274 G1 X-36.646 Y-44.601 E.02689 G2 X-38.612 Y-45.258 I-1.487 J1.178 E.07274 M73 P25 R60 G2 X-39.537 Y-44.553 I4.416 J6.748 E.03863 G1 X-39.537 Y-47.025 E.08199 G1 X-39.267 Y-47.221 E.01108 G3 X-37.301 Y-47.879 I1.487 J1.178 E.07274 G1 X-36.646 Y-47.402 E.02689 G2 X-34.681 Y-46.744 I1.487 J-1.178 E.07274 G1 X-34.026 Y-47.221 E.02689 G3 X-32.06 Y-47.879 I1.487 J1.178 E.07274 G1 X-31.405 Y-47.402 E.02689 G2 X-29.44 Y-46.744 I1.487 J-1.178 E.07274 G1 X-28.784 Y-47.221 E.02689 G3 X-26.819 Y-47.879 I1.487 J1.178 E.07274 G1 X-26.164 Y-47.402 E.02689 G2 X-24.198 Y-46.744 I1.487 J-1.178 E.07274 G1 X-23.543 Y-47.221 E.02689 G3 X-21.578 Y-47.879 I1.487 J1.178 E.07274 G1 X-20.922 Y-47.402 E.02689 G2 X-18.957 Y-46.744 I1.487 J-1.178 E.07274 G1 X-18.302 Y-47.221 E.02689 G3 X-16.336 Y-47.879 I1.487 J1.178 E.07274 G1 X-15.681 Y-47.402 E.02689 G2 X-13.716 Y-46.744 I1.487 J-1.178 E.07274 G1 X-13.06 Y-47.221 E.02689 G3 X-11.095 Y-47.879 I1.487 J1.178 E.07274 G1 X-10.44 Y-47.402 E.02689 G2 X-8.474 Y-46.744 I1.487 J-1.178 E.07274 G1 X-7.819 Y-47.221 E.02689 G3 X-5.854 Y-47.879 I1.487 J1.178 E.07274 G1 X-5.198 Y-47.402 E.02689 G2 X-3.233 Y-46.744 I1.487 J-1.178 E.07274 G1 X-2.578 Y-47.221 E.02689 G3 X-.612 Y-47.879 I1.487 J1.178 E.07274 G1 X.043 Y-47.402 E.02689 G2 X2.008 Y-46.744 I1.487 J-1.178 E.07274 G1 X2.663 Y-47.221 E.02689 G3 X4.629 Y-47.879 I1.487 J1.178 E.07274 G1 X5.284 Y-47.402 E.02689 G2 X7.25 Y-46.744 I1.487 J-1.178 E.07274 G1 X7.905 Y-47.221 E.02689 G3 X9.87 Y-47.879 I1.487 J1.178 E.07274 G1 X10.525 Y-47.402 E.02689 G2 X12.491 Y-46.744 I1.487 J-1.178 E.07274 G1 X13.146 Y-47.221 E.02689 G3 X15.112 Y-47.879 I1.487 J1.178 E.07274 G1 X15.767 Y-47.402 E.02689 G2 X17.732 Y-46.744 I1.487 J-1.178 E.07274 G2 X18.937 Y-47.686 I-5.91 J-8.799 E.05077 G1 X18.937 Y-50.423 E.09079 G1 X18.387 Y-50.022 E.02255 G3 X16.422 Y-49.365 I-1.487 J-1.178 E.07274 G1 X15.767 Y-49.842 E.02689 G2 X13.801 Y-50.5 I-1.487 J1.178 E.07274 G1 X13.146 Y-50.022 E.02689 G3 X11.181 Y-49.365 I-1.487 J-1.178 E.07274 G1 X10.525 Y-49.842 E.02689 G2 X8.56 Y-50.5 I-1.487 J1.178 E.07274 G1 X7.905 Y-50.022 E.02689 G3 X5.939 Y-49.365 I-1.487 J-1.178 E.07274 G1 X5.284 Y-49.842 E.02689 G2 X3.319 Y-50.5 I-1.487 J1.178 E.07274 G1 X2.663 Y-50.022 E.02689 G3 X.698 Y-49.365 I-1.487 J-1.178 E.07274 G1 X.043 Y-49.842 E.02689 G2 X-1.923 Y-50.5 I-1.487 J1.178 E.07274 G1 X-2.578 Y-50.022 E.02689 G3 X-4.543 Y-49.365 I-1.487 J-1.178 E.07274 G1 X-5.198 Y-49.842 E.02689 G2 X-7.164 Y-50.5 I-1.487 J1.178 E.07274 G1 X-7.819 Y-50.022 E.02689 G3 X-9.785 Y-49.365 I-1.487 J-1.178 E.07274 G1 X-10.44 Y-49.842 E.02689 G2 X-12.405 Y-50.5 I-1.487 J1.178 E.07274 G1 X-13.06 Y-50.022 E.02689 G3 X-15.026 Y-49.365 I-1.487 J-1.178 E.07274 G1 X-15.681 Y-49.842 E.02689 G2 X-17.647 Y-50.5 I-1.487 J1.178 E.07274 G1 X-18.302 Y-50.022 E.02689 G3 X-20.267 Y-49.365 I-1.487 J-1.178 E.07274 G1 X-20.922 Y-49.842 E.02689 G2 X-22.888 Y-50.5 I-1.487 J1.178 E.07274 G1 X-23.543 Y-50.022 E.02689 G3 X-25.509 Y-49.365 I-1.487 J-1.178 E.07274 G1 X-26.164 Y-49.842 E.02689 G2 X-28.129 Y-50.5 I-1.487 J1.178 E.07274 G1 X-28.784 Y-50.022 E.02689 G3 X-30.75 Y-49.365 I-1.487 J-1.178 E.07274 G1 X-31.405 Y-49.842 E.02689 G2 X-33.37 Y-50.5 I-1.487 J1.178 E.07274 G1 X-34.026 Y-50.022 E.02689 G3 X-35.991 Y-49.365 I-1.487 J-1.178 E.07274 G1 X-36.646 Y-49.842 E.02689 G2 X-38.612 Y-50.5 I-1.487 J1.178 E.07274 G2 X-39.537 Y-49.794 I4.416 J6.748 E.03863 G1 X-39.537 Y-48.166 E.05401 G1 X-38.171 Y-41.551 F30000 G1 F16200 G3 X-36.701 Y-42.2 I1.91 J2.333 E.05396 G1 X-37.301 Y-42.638 E.02464 G2 X-39.267 Y-41.98 I-.478 J1.836 E.07274 G1 X-39.537 Y-41.783 E.01108 G1 X-39.537 Y-40.66 E.03725 G1 X-39.038 Y-40.578 E.01676 G1 X-39.285 Y-40.405 F30000 ;TYPE:Gap infill ;WIDTH:0.475341 G1 F12000 G2 X-39.337 Y-40.088 I4.836 J.947 E.01132 ;WIDTH:0.439028 G1 X-39.356 Y-39.896 E.00622 ;WIDTH:0.399138 G2 X-39.376 Y-39.682 I3.263 J.418 E.00624 ;WIDTH:0.366947 G2 X-39.375 Y-38.872 I8.954 J.389 E.02139 ;WIDTH:0.401237 G1 X-39.356 Y-38.68 E.00563 ;WIDTH:0.441847 G2 X-39.333 Y-38.461 I3.343 J-.232 E.00717 ;WIDTH:0.46514 G1 X-39.285 Y-38.171 E.0101 G1 X-39.285 Y-22.405 F30000 ;WIDTH:0.475339 G1 F12000 G2 X-39.337 Y-22.088 I4.836 J.947 E.01132 ;WIDTH:0.439026 G1 X-39.356 Y-21.896 E.00622 ;WIDTH:0.399138 G2 X-39.376 Y-21.682 I3.263 J.418 E.00624 ;WIDTH:0.366947 G2 X-39.375 Y-20.872 I8.955 J.389 E.02139 ;WIDTH:0.401236 G1 X-39.356 Y-20.68 E.00563 ;WIDTH:0.441848 G2 X-39.333 Y-20.461 I3.346 J-.233 E.00717 ;WIDTH:0.465141 G1 X-39.285 Y-20.171 E.0101 G1 X-39.479 Y-19.925 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-39.537 Y-19.916 E.00195 G1 X-39.537 Y-18.346 E.05206 G3 X-38.612 Y-19.052 I5.341 J6.043 E.03863 G1 X-38.256 Y-19.101 E.0119 G2 X-36.61 Y-18.368 I2.159 J-2.634 E.06051 G1 X-35.991 Y-17.917 E.02539 G2 X-34.026 Y-18.575 I.478 J-1.836 E.07274 G1 X-33.37 Y-19.052 E.02689 G3 X-31.405 Y-18.394 I.478 J1.836 E.07274 G1 X-30.75 Y-17.917 E.02689 G2 X-28.784 Y-18.575 I.478 J-1.836 E.07274 G1 X-28.129 Y-19.052 E.02689 G3 X-26.164 Y-18.394 I.478 J1.836 E.07274 G1 X-25.509 Y-17.917 E.02689 G2 X-23.543 Y-18.575 I.478 J-1.836 E.07274 G1 X-22.888 Y-19.052 E.02689 G3 X-20.922 Y-18.394 I.478 J1.836 E.07274 G1 X-20.267 Y-17.917 E.02689 G2 X-18.302 Y-18.575 I.478 J-1.836 E.07274 G2 X-16.806 Y-19.087 I-.753 J-4.637 E.0527 G1 X-16.336 Y-18.948 E.01625 G2 X-15.026 Y-17.917 I7.785 J-8.543 E.05536 G2 X-13.06 Y-18.575 I.478 J-1.836 E.07274 G1 X-12.405 Y-19.052 E.02689 G3 X-10.44 Y-18.394 I.478 J1.836 E.07274 G1 X-9.785 Y-17.917 E.02689 G2 X-7.819 Y-18.575 I.478 J-1.836 E.07274 G1 X-7.164 Y-19.052 E.02689 G3 X-5.198 Y-18.394 I.478 J1.836 E.07274 G1 X-4.543 Y-17.917 E.02689 G2 X-2.578 Y-18.575 I.478 J-1.836 E.07274 G1 X-1.923 Y-19.052 E.02689 G3 X.043 Y-18.394 I.478 J1.836 E.07274 G1 X.698 Y-17.917 E.02689 G2 X2.663 Y-18.575 I.478 J-1.836 E.07274 G1 X3.319 Y-19.052 E.02689 G3 X5.284 Y-18.394 I.478 J1.836 E.07274 G1 X5.939 Y-17.917 E.02689 G2 X7.905 Y-18.575 I.478 J-1.836 E.07274 G1 X8.56 Y-19.052 E.02689 G3 X10.525 Y-18.394 I.478 J1.836 E.07274 G1 X11.181 Y-17.917 E.02689 G2 X13.146 Y-18.575 I.478 J-1.836 E.07274 G1 X13.801 Y-19.052 E.02689 G3 X15.767 Y-18.394 I.478 J1.836 E.07274 G1 X16.422 Y-17.917 E.02689 G2 X18.387 Y-18.575 I.478 J-1.836 E.07274 G1 X18.937 Y-18.975 E.02255 G1 X18.937 Y-21.479 E.08308 G3 X17.732 Y-20.537 I-7.115 J-7.857 E.05077 G3 X15.767 Y-21.195 I-.478 J-1.836 E.07274 G1 X15.112 Y-21.673 E.02689 G2 X13.146 Y-21.015 I-.478 J1.836 E.07274 G1 X12.491 Y-20.537 E.02689 G3 X10.525 Y-21.195 I-.478 J-1.836 E.07274 G1 X9.87 Y-21.673 E.02689 G2 X7.905 Y-21.015 I-.478 J1.836 E.07274 G1 X7.25 Y-20.537 E.02689 G3 X5.284 Y-21.195 I-.478 J-1.836 E.07274 G1 X4.629 Y-21.673 E.02689 G2 X2.663 Y-21.015 I-.478 J1.836 E.07274 G1 X2.008 Y-20.537 E.02689 G3 X.043 Y-21.195 I-.478 J-1.836 E.07274 G1 X-.612 Y-21.673 E.02689 G2 X-2.578 Y-21.015 I-.478 J1.836 E.07274 G1 X-3.233 Y-20.537 E.02689 G3 X-5.198 Y-21.195 I-.478 J-1.836 E.07274 G1 X-5.854 Y-21.673 E.02689 G2 X-7.819 Y-21.015 I-.478 J1.836 E.07274 G1 X-8.474 Y-20.537 E.02689 G3 X-10.44 Y-21.195 I-.478 J-1.836 E.07274 G1 X-11.095 Y-21.673 E.02689 G2 X-13.06 Y-21.015 I-.478 J1.836 E.07274 G1 X-13.716 Y-20.537 E.02689 G3 X-15.642 Y-21.162 I-.479 J-1.807 E.07101 G2 X-18.128 Y-23.943 I-2.658 J-.125 E.13706 G1 X-17.647 Y-24.293 E.01975 G3 X-15.681 Y-23.635 I.478 J1.836 E.07274 G1 X-15.026 Y-23.158 E.02689 G2 X-13.06 Y-23.816 I.478 J-1.836 E.07274 G1 X-12.405 Y-24.293 E.02689 G3 X-10.44 Y-23.635 I.478 J1.836 E.07274 G1 X-9.785 Y-23.158 E.02689 G2 X-7.819 Y-23.816 I.478 J-1.836 E.07274 G1 X-7.164 Y-24.293 E.02689 G3 X-5.198 Y-23.635 I.478 J1.836 E.07274 G1 X-4.543 Y-23.158 E.02689 G2 X-2.578 Y-23.816 I.478 J-1.836 E.07274 G1 X-1.923 Y-24.293 E.02689 G3 X.043 Y-23.635 I.478 J1.836 E.07274 G1 X.698 Y-23.158 E.02689 G2 X2.663 Y-23.816 I.478 J-1.836 E.07274 G1 X3.319 Y-24.293 E.02689 G3 X5.284 Y-23.635 I.478 J1.836 E.07274 G1 X5.939 Y-23.158 E.02689 G2 X7.905 Y-23.816 I.478 J-1.836 E.07274 G1 X8.56 Y-24.293 E.02689 G3 X10.525 Y-23.635 I.478 J1.836 E.07274 G1 X11.181 Y-23.158 E.02689 G2 X13.146 Y-23.816 I.478 J-1.836 E.07274 G1 X13.801 Y-24.293 E.02689 G3 X15.767 Y-23.635 I.478 J1.836 E.07274 G1 X16.422 Y-23.158 E.02689 G2 X18.387 Y-23.816 I.478 J-1.836 E.07274 G1 X18.937 Y-24.216 E.02255 G1 X18.937 Y-26.721 E.08308 G3 X17.732 Y-25.779 I-7.115 J-7.857 E.05077 G3 X15.767 Y-26.436 I-.478 J-1.836 E.07274 G1 X15.112 Y-26.914 E.02689 G2 X13.146 Y-26.256 I-.478 J1.836 E.07274 G1 X12.491 Y-25.779 E.02689 G3 X10.525 Y-26.436 I-.478 J-1.836 E.07274 G1 X9.87 Y-26.914 E.02689 G2 X7.905 Y-26.256 I-.478 J1.836 E.07274 G1 X7.25 Y-25.779 E.02689 G3 X5.284 Y-26.436 I-.478 J-1.836 E.07274 G1 X4.629 Y-26.914 E.02689 G2 X2.663 Y-26.256 I-.478 J1.836 E.07274 G1 X2.008 Y-25.779 E.02689 G3 X.043 Y-26.436 I-.478 J-1.836 E.07274 G1 X-.612 Y-26.914 E.02689 G2 X-2.578 Y-26.256 I-.478 J1.836 E.07274 G1 X-3.233 Y-25.779 E.02689 G3 X-5.198 Y-26.436 I-.478 J-1.836 E.07274 G1 X-5.854 Y-26.914 E.02689 G2 X-7.819 Y-26.256 I-.478 J1.836 E.07274 G1 X-8.474 Y-25.779 E.02689 G3 X-10.44 Y-26.436 I-.478 J-1.836 E.07274 G1 X-11.095 Y-26.914 E.02689 G2 X-13.06 Y-26.256 I-.478 J1.836 E.07274 G1 X-13.716 Y-25.779 E.02689 G3 X-15.681 Y-26.436 I-.478 J-1.836 E.07274 G1 X-16.336 Y-26.914 E.02689 G2 X-18.302 Y-26.256 I-.478 J1.836 E.07274 G1 X-18.957 Y-25.779 E.02689 G3 X-20.922 Y-26.436 I-.478 J-1.836 E.07274 G1 X-21.578 Y-26.914 E.02689 G2 X-23.543 Y-26.256 I-.478 J1.836 E.07274 G1 X-24.198 Y-25.779 E.02689 G3 X-26.164 Y-26.436 I-.478 J-1.836 E.07274 G1 X-26.819 Y-26.914 E.02689 G2 X-28.784 Y-26.256 I-.478 J1.836 E.07274 G1 X-29.44 Y-25.779 E.02689 G3 X-31.405 Y-26.436 I-.478 J-1.836 E.07274 G1 X-32.06 Y-26.914 E.02689 G2 X-34.026 Y-26.256 I-.478 J1.836 E.07274 G1 X-34.681 Y-25.779 E.02689 G3 X-36.646 Y-26.436 I-.478 J-1.836 E.07274 G1 X-37.301 Y-26.914 E.02689 G2 X-39.267 Y-26.256 I-.478 J1.836 E.07274 G1 X-39.537 Y-26.059 E.01108 G1 X-39.537 Y-23.588 E.08199 G3 X-38.612 Y-24.293 I5.341 J6.043 E.03863 G3 X-37.181 Y-24.088 I.479 J1.747 E.04931 G3 X-34.385 Y-23.512 I.848 J2.961 E.09847 G3 X-33.37 Y-24.293 I5.909 J6.624 E.04252 G3 X-31.405 Y-23.635 I.478 J1.836 E.07274 G1 X-30.75 Y-23.158 E.02689 G2 X-28.784 Y-23.816 I.478 J-1.836 E.07274 G1 X-28.129 Y-24.293 E.02689 G3 X-26.164 Y-23.635 I.478 J1.836 E.07274 G1 X-25.509 Y-23.158 E.02689 G2 X-23.543 Y-23.816 I.478 J-1.836 E.07274 G1 X-22.888 Y-24.293 E.02689 G3 X-20.922 Y-23.635 I.478 J1.836 E.07274 G1 X-20.206 Y-23.15 E.02872 G2 X-20.962 Y-21.224 I1.942 J1.874 E.07043 G1 X-21.578 Y-21.673 E.02528 G2 X-23.543 Y-21.015 I-.478 J1.836 E.07274 G1 X-24.198 Y-20.537 E.02689 G3 X-26.164 Y-21.195 I-.478 J-1.836 E.07274 G1 X-26.819 Y-21.673 E.02689 G2 X-28.784 Y-21.015 I-.478 J1.836 E.07274 G1 X-29.44 Y-20.537 E.02689 G3 X-31.405 Y-21.195 I-.478 J-1.836 E.07274 G1 X-32.06 Y-21.673 E.02689 G2 X-33.377 Y-21.563 I-.539 J1.494 E.04521 G3 X-33.671 Y-19.985 I-2.937 J.27 E.05394 G1 X-19.948 Y-37.195 F30000 G1 F16200 G2 X-18.448 Y-36.632 I1.817 J-2.559 E.05373 G3 X-20.267 Y-36.365 I-1.08 J-1.028 E.06572 G1 X-20.922 Y-36.919 E.02846 G2 X-22.888 Y-37.293 I-1.234 J1.136 E.07111 G1 X-23.543 Y-36.739 E.02846 G3 X-25.509 Y-36.365 I-1.234 J-1.136 E.07111 G1 X-26.164 Y-36.919 E.02846 G2 X-28.129 Y-37.293 I-1.234 J1.136 E.07111 G1 X-28.784 Y-36.739 E.02846 G3 X-30.75 Y-36.365 I-1.234 J-1.136 E.07111 G1 X-31.405 Y-36.919 E.02846 G2 X-33.37 Y-37.293 I-1.234 J1.136 E.07111 G1 X-34.026 Y-36.739 E.02846 G3 X-35.991 Y-36.365 I-1.234 J-1.136 E.07111 G3 X-38.486 Y-37.33 I-.295 J-2.944 E.09207 G2 X-39.537 Y-36.542 I5.588 J8.549 E.0436 G1 X-39.537 Y-34.07 E.08199 G1 X-39.267 Y-34.298 E.01173 G3 X-37.301 Y-34.672 I1.234 J1.136 E.07111 G1 X-36.646 Y-34.118 E.02846 G2 X-34.681 Y-33.744 I1.234 J-1.136 E.07111 G1 X-34.026 Y-34.298 E.02846 G3 X-32.06 Y-34.672 I1.234 J1.136 E.07111 G1 X-31.405 Y-34.118 E.02846 G2 X-29.44 Y-33.744 I1.234 J-1.136 E.07111 G1 X-28.784 Y-34.298 E.02846 G3 X-26.819 Y-34.672 I1.234 J1.136 E.07111 G1 X-26.164 Y-34.118 E.02846 G2 X-24.198 Y-33.744 I1.234 J-1.136 E.07111 G1 X-23.543 Y-34.298 E.02846 G3 X-21.578 Y-34.672 I1.234 J1.136 E.07111 G1 X-20.922 Y-34.118 E.02846 G2 X-18.957 Y-33.744 I1.234 J-1.136 E.07111 G1 X-18.302 Y-34.298 E.02846 G3 X-16.336 Y-34.672 I1.234 J1.136 E.07111 G1 X-15.681 Y-34.118 E.02846 G2 X-13.716 Y-33.744 I1.234 J-1.136 E.07111 G1 X-13.06 Y-34.298 E.02846 G3 X-11.095 Y-34.672 I1.234 J1.136 E.07111 G1 X-10.44 Y-34.118 E.02846 G2 X-8.474 Y-33.744 I1.234 J-1.136 E.07111 G1 X-7.819 Y-34.298 E.02846 G3 X-5.854 Y-34.672 I1.234 J1.136 E.07111 G1 X-5.198 Y-34.118 E.02846 G2 X-3.233 Y-33.744 I1.234 J-1.136 E.07111 G1 X-2.578 Y-34.298 E.02846 G3 X-.612 Y-34.672 I1.234 J1.136 E.07111 G1 X.043 Y-34.118 E.02846 G2 X2.008 Y-33.744 I1.234 J-1.136 E.07111 G1 X2.663 Y-34.298 E.02846 G3 X4.629 Y-34.672 I1.234 J1.136 E.07111 G1 X5.284 Y-34.118 E.02846 G2 X7.25 Y-33.744 I1.234 J-1.136 E.07111 G1 X7.905 Y-34.298 E.02846 G3 X9.87 Y-34.672 I1.234 J1.136 E.07111 G1 X10.525 Y-34.118 E.02846 G2 X12.491 Y-33.744 I1.234 J-1.136 E.07111 G1 X13.146 Y-34.298 E.02846 G3 X15.112 Y-34.672 I1.234 J1.136 E.07111 G1 X15.767 Y-34.118 E.02846 G2 X17.732 Y-33.744 I1.234 J-1.136 E.07111 G3 X18.937 Y-34.699 I7.2 J7.851 E.05103 G1 X18.937 Y-37.203 E.08308 G1 X18.387 Y-36.739 E.02387 G3 X16.422 Y-36.365 I-1.234 J-1.136 E.07111 G1 X15.767 Y-36.919 E.02846 G2 X13.801 Y-37.293 I-1.234 J1.136 E.07111 G1 X13.146 Y-36.739 E.02846 G3 X11.181 Y-36.365 I-1.234 J-1.136 E.07111 G1 X10.525 Y-36.919 E.02846 G2 X8.56 Y-37.293 I-1.234 J1.136 E.07111 G1 X7.905 Y-36.739 E.02846 G3 X5.939 Y-36.365 I-1.234 J-1.136 E.07111 G1 X5.284 Y-36.919 E.02846 G2 X3.319 Y-37.293 I-1.234 J1.136 E.07111 G1 X2.663 Y-36.739 E.02846 G3 X.698 Y-36.365 I-1.234 J-1.136 E.07111 G1 X.043 Y-36.919 E.02846 G2 X-1.923 Y-37.293 I-1.234 J1.136 E.07111 G1 X-2.578 Y-36.739 E.02846 G3 X-4.543 Y-36.365 I-1.234 J-1.136 E.07111 G1 X-5.198 Y-36.919 E.02846 G2 X-7.164 Y-37.293 I-1.234 J1.136 E.07111 G1 X-7.819 Y-36.739 E.02846 G3 X-9.785 Y-36.365 I-1.234 J-1.136 E.07111 G1 X-10.44 Y-36.919 E.02846 G2 X-12.405 Y-37.293 I-1.234 J1.136 E.07111 G1 X-13.06 Y-36.739 E.02846 G3 X-15.026 Y-36.365 I-1.234 J-1.136 E.07111 G2 X-16.336 Y-37.397 I-7.786 J8.543 E.05536 G1 X-16.412 Y-37.407 E.00252 G2 X-15.637 Y-39.327 I-1.942 J-1.9 E.07047 G2 X-13.716 Y-38.986 I1.194 J-1.142 E.06924 G1 X-13.06 Y-39.54 E.02846 G3 X-11.095 Y-39.913 I1.234 J1.136 E.07111 G1 X-10.44 Y-39.359 E.02846 G2 X-8.474 Y-38.986 I1.234 J-1.136 E.07111 G1 X-7.819 Y-39.54 E.02846 G3 X-5.854 Y-39.913 I1.234 J1.136 E.07111 G1 X-5.198 Y-39.359 E.02846 G2 X-3.233 Y-38.986 I1.234 J-1.136 E.07111 G1 X-2.578 Y-39.54 E.02846 G3 X-.612 Y-39.913 I1.234 J1.136 E.07111 G1 X.043 Y-39.359 E.02846 G2 X2.008 Y-38.986 I1.234 J-1.136 E.07111 G1 X2.663 Y-39.54 E.02846 G3 X4.629 Y-39.913 I1.234 J1.136 E.07111 G1 X5.284 Y-39.359 E.02846 G2 X7.25 Y-38.986 I1.234 J-1.136 E.07111 G1 X7.905 Y-39.54 E.02846 G3 X9.87 Y-39.913 I1.234 J1.136 E.07111 G1 X10.525 Y-39.359 E.02846 G2 X12.491 Y-38.986 I1.234 J-1.136 E.07111 G1 X13.146 Y-39.54 E.02846 G3 X15.112 Y-39.913 I1.234 J1.136 E.07111 G1 X15.767 Y-39.359 E.02846 G2 X17.732 Y-38.986 I1.234 J-1.136 E.07111 G3 X18.937 Y-39.94 I7.2 J7.851 E.05103 G1 X18.937 Y-42.445 E.08308 G1 X18.387 Y-41.98 E.02387 G3 X16.422 Y-41.606 I-1.234 J-1.136 E.07111 G1 X15.767 Y-42.16 E.02846 G2 X13.801 Y-42.534 I-1.234 J1.136 E.07111 G1 X13.146 Y-41.98 E.02846 G3 X11.181 Y-41.606 I-1.234 J-1.136 E.07111 G1 X10.525 Y-42.16 E.02846 G2 X8.56 Y-42.534 I-1.234 J1.136 E.07111 G1 X7.905 Y-41.98 E.02846 G3 X5.939 Y-41.606 I-1.234 J-1.136 E.07111 G1 X5.284 Y-42.16 E.02846 G2 X3.319 Y-42.534 I-1.234 J1.136 E.07111 G1 X2.663 Y-41.98 E.02846 G3 X.698 Y-41.606 I-1.234 J-1.136 E.07111 G1 X.043 Y-42.16 E.02846 G2 X-1.923 Y-42.534 I-1.234 J1.136 E.07111 G1 X-2.578 Y-41.98 E.02846 G3 X-4.543 Y-41.606 I-1.234 J-1.136 E.07111 G1 X-5.198 Y-42.16 E.02846 G2 X-7.164 Y-42.534 I-1.234 J1.136 E.07111 G1 X-7.819 Y-41.98 E.02846 G3 X-9.785 Y-41.606 I-1.234 J-1.136 E.07111 G1 X-10.44 Y-42.16 E.02846 G2 X-12.405 Y-42.534 I-1.234 J1.136 E.07111 G1 X-13.06 Y-41.98 E.02846 G3 X-15.026 Y-41.606 I-1.234 J-1.136 E.07111 G1 X-15.681 Y-42.16 E.02846 G2 X-17.647 Y-42.534 I-1.234 J1.136 E.07111 G1 X-18.302 Y-41.98 E.02846 G2 X-19.818 Y-41.473 I.267 J3.32 E.05354 G1 X-20.267 Y-41.606 E.01556 G1 X-20.922 Y-42.16 E.02846 G2 X-22.888 Y-42.534 I-1.234 J1.136 E.07111 G1 X-23.543 Y-41.98 E.02846 G3 X-25.509 Y-41.606 I-1.234 J-1.136 E.07111 G1 X-26.164 Y-42.16 E.02846 G2 X-28.129 Y-42.534 I-1.234 J1.136 E.07111 G1 X-28.784 Y-41.98 E.02846 G3 X-30.75 Y-41.606 I-1.234 J-1.136 E.07111 G1 X-31.405 Y-42.16 E.02846 G2 X-33.37 Y-42.534 I-1.234 J1.136 E.07111 G3 X-34.514 Y-41.624 I-6.862 J-7.451 E.04852 G3 X-33.443 Y-39.965 I-1.849 J2.369 E.06677 G3 X-32.06 Y-39.913 I.629 J1.709 E.04707 G1 X-31.405 Y-39.359 E.02846 G2 X-29.44 Y-38.986 I1.234 J-1.136 E.07111 G1 X-28.784 Y-39.54 E.02846 G3 X-26.819 Y-39.913 I1.234 J1.136 E.07111 G1 X-26.164 Y-39.359 E.02846 G2 X-24.198 Y-38.986 I1.234 J-1.136 E.07111 G1 X-23.543 Y-39.54 E.02846 G3 X-21.578 Y-39.913 I1.234 J1.136 E.07111 G1 X-20.959 Y-39.39 E.02687 G2 X-20.536 Y-37.846 I3.09 J-.017 E.05372 G1 X-27.037 Y-57.33 F30000 G1 F16200 G1 X-27.037 Y-55.702 E.05401 G1 X-26.819 Y-55.637 E.00754 G1 X-26.164 Y-55.083 E.02846 G2 X-24.198 Y-54.71 I1.234 J-1.136 E.07111 G1 X-23.543 Y-55.264 E.02846 G3 X-21.578 Y-55.637 I1.234 J1.136 E.07111 G1 X-20.922 Y-55.083 E.02846 G2 X-18.957 Y-54.71 I1.234 J-1.136 E.07111 G1 X-18.302 Y-55.264 E.02846 G3 X-16.336 Y-55.637 I1.234 J1.136 E.07111 G1 X-15.681 Y-55.083 E.02846 G2 X-13.716 Y-54.71 I1.234 J-1.136 E.07111 G1 X-13.06 Y-55.264 E.02846 G3 X-11.095 Y-55.637 I1.234 J1.136 E.07111 G1 X-10.44 Y-55.083 E.02846 G2 X-8.474 Y-54.71 I1.234 J-1.136 E.07111 G1 X-7.819 Y-55.264 E.02846 G3 X-5.854 Y-55.637 I1.234 J1.136 E.07111 G1 X-5.198 Y-55.083 E.02846 G2 X-3.233 Y-54.71 I1.234 J-1.136 E.07111 G1 X-2.578 Y-55.264 E.02846 G3 X-.612 Y-55.637 I1.234 J1.136 E.07111 G1 X.043 Y-55.083 E.02846 G2 X2.008 Y-54.71 I1.234 J-1.136 E.07111 G1 X2.663 Y-55.264 E.02846 G3 X4.629 Y-55.637 I1.234 J1.136 E.07111 G2 X5.939 Y-54.606 I7.785 J-8.543 E.05536 G1 X6.437 Y-54.538 E.01666 G1 X6.437 Y-57.183 E.08776 G1 X5.939 Y-57.33 E.01721 G1 X5.284 Y-57.884 E.02846 G2 X3.319 Y-58.258 I-1.234 J1.136 E.07111 G1 X2.663 Y-57.704 E.02846 G3 X.698 Y-57.33 I-1.234 J-1.136 E.07111 G1 X.043 Y-57.884 E.02846 G2 X-1.923 Y-58.258 I-1.234 J1.136 E.07111 G1 X-2.578 Y-57.704 E.02846 G3 X-4.543 Y-57.33 I-1.234 J-1.136 E.07111 G1 X-5.198 Y-57.884 E.02846 G2 X-7.164 Y-58.258 I-1.234 J1.136 E.07111 G1 X-7.819 Y-57.704 E.02846 G3 X-9.785 Y-57.33 I-1.234 J-1.136 E.07111 G1 X-10.44 Y-57.884 E.02846 G2 X-12.405 Y-58.258 I-1.234 J1.136 E.07111 G1 X-13.06 Y-57.704 E.02846 G3 X-15.026 Y-57.33 I-1.234 J-1.136 E.07111 G1 X-15.681 Y-57.884 E.02846 G2 X-17.647 Y-58.258 I-1.234 J1.136 E.07111 G1 X-18.302 Y-57.704 E.02846 G3 X-20.267 Y-57.33 I-1.234 J-1.136 E.07111 G1 X-20.922 Y-57.884 E.02846 G2 X-22.888 Y-58.258 I-1.234 J1.136 E.07111 G1 X-23.543 Y-57.704 E.02846 G3 X-25.509 Y-57.33 I-1.234 J-1.136 E.07111 G2 X-26.819 Y-58.362 I-7.785 J8.543 E.05536 G1 X-27.037 Y-58.392 E.0073 G1 X-27.037 Y-59.737 E.04462 G1 X-26.754 Y-59.737 E.00939 G1 X-27.451 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-35.149 Y-60 E.19 G1 X-51.537 Y-58.906 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-51.537 Y-57.278 E.05401 G1 X-51.06 Y-57.137 E.0165 G1 X-50.405 Y-57.227 E.02194 G1 X-49.75 Y-57.704 E.02689 G3 X-47.784 Y-58.362 I1.487 J1.178 E.07274 G1 X-47.129 Y-57.884 E.02689 G2 X-45.163 Y-57.227 I1.487 J-1.178 E.07274 G1 X-44.508 Y-57.704 E.02689 G3 X-42.543 Y-58.362 I1.487 J1.178 E.07274 G1 X-41.888 Y-57.884 E.02689 G2 X-39.922 Y-57.227 I1.487 J-1.178 E.07274 G1 X-39.267 Y-57.704 E.02689 G3 X-37.301 Y-58.362 I1.487 J1.178 E.07274 G3 X-35.991 Y-57.33 I-6.475 J9.574 E.05536 G1 X-35.563 Y-57.204 E.01481 G1 X-35.563 Y-54.547 E.08813 G1 X-35.991 Y-54.606 E.01433 G1 X-36.646 Y-55.083 E.02689 G2 X-38.612 Y-55.741 I-1.487 J1.178 E.07274 G1 X-39.267 Y-55.264 E.02689 G3 X-41.232 Y-54.606 I-1.487 J-1.178 E.07274 G1 X-41.888 Y-55.083 E.02689 G2 X-43.853 Y-55.741 I-1.487 J1.178 E.07274 G1 X-44.508 Y-55.264 E.02689 G3 X-46.474 Y-54.606 I-1.487 J-1.178 E.07274 G1 X-47.129 Y-55.083 E.02689 G2 X-49.094 Y-55.741 I-1.487 J1.178 E.07274 G2 X-50.405 Y-54.71 I6.475 J9.575 E.05536 G1 X-51.06 Y-54.516 E.02266 G1 X-51.537 Y-54.581 E.01597 G1 X-51.537 Y-52.263 E.0769 G1 X-50.023 Y-52.263 E.05021 G1 X-49.75 Y-52.463 E.01124 G3 X-47.784 Y-53.12 I1.487 J1.178 E.07274 G3 X-46.68 Y-52.263 I-5.375 J8.064 E.04642 G1 X-44.782 Y-52.263 E.06295 G1 X-44.508 Y-52.463 E.01124 G3 X-42.543 Y-53.12 I1.487 J1.178 E.07274 G3 X-41.438 Y-52.263 I-5.375 J8.064 E.04642 G1 X-39.541 Y-52.263 E.06295 G1 X-39.267 Y-52.463 E.01124 G3 X-37.301 Y-53.12 I1.487 J1.178 E.07274 G1 X-36.646 Y-52.643 E.02689 G2 X-34.681 Y-51.985 I1.487 J-1.178 E.07274 G2 X-33.701 Y-52.737 I-4.707 J-7.148 E.04099 G1 X-31.534 Y-52.737 E.0719 G1 X-31.405 Y-52.643 E.00529 G2 X-29.44 Y-51.985 I1.487 J-1.178 E.07274 G2 X-28.46 Y-52.737 I-4.707 J-7.148 E.04099 G1 X-27.037 Y-52.737 E.04721 G1 X-27.037 Y-53.15 E.01372 G1 X-26.819 Y-53.12 E.0073 G1 X-26.164 Y-52.643 E.02689 G2 X-24.198 Y-51.985 I1.487 J-1.178 E.07274 G1 X-23.543 Y-52.463 E.02689 G3 X-21.578 Y-53.12 I1.487 J1.178 E.07274 G1 X-20.922 Y-52.643 E.02689 G2 X-18.957 Y-51.985 I1.487 J-1.178 E.07274 G1 X-18.302 Y-52.463 E.02689 G3 X-16.336 Y-53.12 I1.487 J1.178 E.07274 G1 X-15.681 Y-52.643 E.02689 G2 X-13.716 Y-51.985 I1.487 J-1.178 E.07274 G1 X-13.06 Y-52.463 E.02689 G3 X-11.095 Y-53.12 I1.487 J1.178 E.07274 G1 X-10.44 Y-52.643 E.02689 G2 X-8.474 Y-51.985 I1.487 J-1.178 E.07274 G1 X-7.819 Y-52.463 E.02689 G3 X-5.854 Y-53.12 I1.487 J1.178 E.07274 G1 X-5.198 Y-52.643 E.02689 G2 X-3.233 Y-51.985 I1.487 J-1.178 E.07274 G1 X-2.578 Y-52.463 E.02689 G3 X-.612 Y-53.12 I1.487 J1.178 E.07274 G1 X.043 Y-52.643 E.02689 G2 X2.008 Y-51.985 I1.487 J-1.178 E.07274 G1 X2.663 Y-52.463 E.02689 G3 X4.629 Y-53.12 I1.487 J1.178 E.07274 G1 X5.284 Y-52.643 E.02689 G2 X7.25 Y-51.985 I1.487 J-1.178 E.07274 G2 X8.229 Y-52.737 I-4.707 J-7.148 E.04099 G1 X10.397 Y-52.737 E.0719 G1 X10.525 Y-52.643 E.00529 G2 X12.491 Y-51.985 I1.487 J-1.178 E.07274 G2 X13.47 Y-52.737 I-4.707 J-7.148 E.04099 G1 X14.963 Y-52.737 E.04952 G1 X14.963 Y-53.141 E.0134 G1 X15.112 Y-53.12 E.00497 G1 X15.767 Y-52.643 E.02689 G2 X17.732 Y-51.985 I1.487 J-1.178 E.07274 G1 X18.387 Y-52.463 E.02689 G3 X20.353 Y-53.12 I1.487 J1.178 E.07274 G3 X21.457 Y-52.263 I-5.375 J8.064 E.04642 G1 X23.355 Y-52.263 E.06295 G1 X23.629 Y-52.463 E.01124 G3 X25.594 Y-53.12 I1.487 J1.178 E.07274 G3 X26.699 Y-52.263 I-5.375 J8.064 E.04642 G1 X28.596 Y-52.263 E.06295 G1 X28.87 Y-52.463 E.01124 G3 X30.835 Y-53.12 I1.487 J1.178 E.07274 G1 X30.937 Y-53.047 E.00416 G1 X30.937 Y-55.552 E.0831 G2 X29.525 Y-55.741 I-.933 J1.596 E.0485 G1 X28.87 Y-55.264 E.02689 G3 X26.905 Y-54.606 I-1.487 J-1.178 E.07274 G1 X26.249 Y-55.083 E.02689 G2 X24.284 Y-55.741 I-1.487 J1.178 E.07274 G1 X23.629 Y-55.264 E.02689 G3 X21.663 Y-54.606 I-1.487 J-1.178 E.07274 G1 X21.008 Y-55.083 E.02689 G2 X19.043 Y-55.741 I-1.487 J1.178 E.07274 G1 X18.387 Y-55.264 E.02689 G3 X16.422 Y-54.606 I-1.487 J-1.178 E.07274 G3 X15.112 Y-55.637 I6.475 J-9.574 E.05536 G1 X14.963 Y-55.681 E.00514 G1 X14.963 Y-58.382 E.0896 G1 X15.112 Y-58.362 E.00497 G1 X15.767 Y-57.884 E.02689 G2 X17.732 Y-57.227 I1.487 J-1.178 E.07274 G1 X18.387 Y-57.704 E.02689 G3 X20.353 Y-58.362 I1.487 J1.178 E.07274 G1 X21.008 Y-57.884 E.02689 G2 X22.974 Y-57.227 I1.487 J-1.178 E.07274 G1 X23.629 Y-57.704 E.02689 G3 X25.594 Y-58.362 I1.487 J1.178 E.07274 G1 X26.249 Y-57.884 E.02689 G2 X28.215 Y-57.227 I1.487 J-1.178 E.07274 G1 X28.87 Y-57.704 E.02689 G3 X30.835 Y-58.362 I1.487 J1.178 E.07274 G1 X30.937 Y-58.288 E.00416 G1 X30.937 Y-59.737 E.04807 G1 X30.758 Y-59.737 E.00595 G1 X14.549 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X6.851 Y-60 E.19 G1 X8.734 Y-2.263 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X8.763 Y-.664 E.05307 G1 X9.215 Y-.797 E.01564 G1 X9.87 Y-.707 E.02194 G3 X11.181 Y.324 I-6.475 J9.575 E.05536 G2 X13.146 Y-.05 I.731 J-1.51 E.07111 G1 X13.801 Y-.604 E.02846 G3 X15.767 Y-.23 I.731 J1.51 E.07111 G1 X16.422 Y.324 E.02846 G2 X18.387 Y-.05 I.731 J-1.51 E.07111 G1 X19.043 Y-.604 E.02846 G3 X21.008 Y-.23 I.731 J1.51 E.07111 G1 X21.663 Y.324 E.02846 G2 X22.99 Y.415 I.761 J-1.369 E.04558 G2 X23.852 Y2.228 I3.223 J-.421 E.06767 G2 X22.974 Y2.945 I4.516 J6.433 E.03765 G3 X21.008 Y2.571 I-.731 J-1.51 E.07111 G1 X20.353 Y2.017 E.02846 G2 X18.387 Y2.391 I-.731 J1.51 E.07111 G1 X17.732 Y2.945 E.02846 G3 X15.767 Y2.571 I-.731 J-1.51 E.07111 G1 X15.112 Y2.017 E.02846 G2 X13.146 Y2.391 I-.731 J1.51 E.07111 G1 X12.491 Y2.945 E.02846 G3 X10.525 Y2.571 I-.731 J-1.51 E.07111 G1 X9.87 Y2.017 E.02846 G1 X9.215 Y1.823 E.02266 G1 X8.763 Y1.885 E.01513 G1 X8.763 Y2.909 E.03395 G3 X9.348 Y2.758 I.866 J2.144 E.02008 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X8.763 Y2.909 G1 X8.763 Y1.885 G1 X9.133 Y1.835 ;WIPE_END G1 X11.7 Y7.154 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 G1 F16200 G2 X12.347 Y5.689 I-2.427 J-1.947 E.05373 G1 X12.491 Y5.669 E.00482 G2 X13.801 Y4.638 I-6.475 J-9.575 E.05536 G3 X15.767 Y5.011 I.731 J1.51 E.07111 G1 X16.422 Y5.565 E.02846 G2 X18.387 Y5.192 I.731 J-1.51 E.07111 G1 X19.043 Y4.638 E.02846 G3 X21.008 Y5.011 I.731 J1.51 E.07111 G1 X21.663 Y5.565 E.02846 G2 X23.629 Y5.192 I.731 J-1.51 E.07111 G1 X24.284 Y4.638 E.02846 G3 X26.249 Y5.011 I.731 J1.51 E.07111 G1 X26.905 Y5.565 E.02846 G1 X27.56 Y5.759 E.02266 G1 X27.937 Y5.707 E.01263 G1 X27.937 Y8.268 E.08495 G1 X27.56 Y8.38 E.01305 G1 X26.905 Y8.29 E.02194 G3 X25.594 Y7.258 I6.475 J-9.574 E.05536 G2 X23.629 Y7.632 I-.731 J1.51 E.07111 G1 X22.974 Y8.186 E.02846 G3 X21.008 Y7.812 I-.731 J-1.51 E.07111 G1 X20.353 Y7.258 E.02846 G2 X18.387 Y7.632 I-.731 J1.51 E.07111 G1 X17.732 Y8.186 E.02846 G3 X15.767 Y7.812 I-.731 J-1.51 E.07111 G1 X15.112 Y7.258 E.02846 G2 X13.146 Y7.632 I-.731 J1.51 E.07111 G1 X12.491 Y8.186 E.02846 G3 X10.635 Y7.892 I-.744 J-1.31 E.06732 G3 X9.034 Y7.98 I-.943 J-2.551 E.05396 G1 X22.519 Y17.737 F30000 G1 F16200 G1 X24.147 Y17.737 E.05401 G3 X25.58 Y17.737 I.717 J1.483 E.04919 G1 X27.209 Y17.737 E.05401 G1 X27.7 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y32.256 E.57795 G1 X23.155 Y32.263 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.937 Y32.263 E.0404 G1 X21.937 Y31.853 E.01361 G1 X21.663 Y31.772 E.00947 G2 X20.353 Y30.74 I-7.786 J8.543 E.05536 G2 X18.387 Y31.398 I-.478 J1.836 E.07274 G1 X17.732 Y31.876 E.02689 G3 X15.767 Y31.218 I-.478 J-1.836 E.07274 G1 X15.112 Y30.74 E.02689 G2 X13.146 Y31.398 I-.478 J1.836 E.07274 G1 X12.491 Y31.876 E.02689 G3 X10.525 Y31.218 I-.478 J-1.836 E.07274 G1 X9.87 Y30.74 E.02689 G2 X7.905 Y31.398 I-.478 J1.836 E.07274 G1 X7.25 Y31.876 E.02689 G3 X5.284 Y31.218 I-.478 J-1.836 E.07274 G1 X4.963 Y30.984 E.01318 G1 X4.963 Y28.506 E.08219 G2 X5.939 Y29.255 I5.665 J-6.374 E.04085 G2 X7.905 Y28.597 I.478 J-1.836 E.07274 G1 X8.56 Y28.12 E.02689 G3 X10.525 Y28.778 I.478 J1.836 E.07274 G1 X11.181 Y29.255 E.02689 G2 X13.146 Y28.597 I.478 J-1.836 E.07274 G1 X13.801 Y28.12 E.02689 G3 X15.767 Y28.778 I.478 J1.836 E.07274 G1 X16.422 Y29.255 E.02689 G2 X18.387 Y28.597 I.478 J-1.836 E.07274 G1 X19.043 Y28.12 E.02689 G3 X21.008 Y28.778 I.478 J1.836 E.07274 G1 X21.663 Y29.255 E.02689 G1 X21.937 Y29.293 E.00916 G1 X21.937 Y27.664 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X21.937 Y29.293 G1 X21.663 Y29.255 G1 X21.586 Y29.199 ;WIPE_END G1 X14.132 Y30.837 Z1.8 F30000 G1 X-1.452 Y34.263 Z1.8 G1 Z1.4 G1 E.8 F1800 G1 F16200 G1 X-3.08 Y34.263 E.05401 G3 X-4.543 Y34.496 I-.984 J-1.466 E.05072 G1 X-4.863 Y34.263 E.01313 G1 X-8.321 Y34.263 E.11471 G3 X-9.785 Y34.496 I-.984 J-1.466 E.05072 G1 X-10.105 Y34.263 E.01313 G1 X-13.563 Y34.263 E.11471 G3 X-15.026 Y34.496 I-.984 J-1.466 E.05072 G1 X-15.346 Y34.263 E.01313 G1 X-18.804 Y34.263 E.11471 G3 X-20.267 Y34.496 I-.984 J-1.466 E.05072 G1 X-20.587 Y34.263 E.01313 G1 X-24.045 Y34.263 E.11471 G3 X-25.509 Y34.496 I-.984 J-1.466 E.05072 G1 X-26.164 Y34.019 E.02689 G2 X-28.129 Y33.361 I-1.487 J1.178 E.07274 G1 X-28.784 Y33.839 E.02689 G3 X-30.75 Y34.496 I-1.487 J-1.178 E.07274 G1 X-31.405 Y34.019 E.02689 G2 X-33.37 Y33.361 I-1.487 J1.178 E.07274 G1 X-34.026 Y33.839 E.02689 G3 X-35.991 Y34.496 I-1.487 J-1.178 E.07274 G1 X-36.646 Y34.019 E.02689 G2 X-38.612 Y33.361 I-1.487 J1.178 E.07274 G1 X-39.267 Y33.839 E.02689 G3 X-41.232 Y34.496 I-1.487 J-1.178 E.07274 G1 X-41.888 Y34.019 E.02689 G2 X-43.853 Y33.361 I-1.487 J1.178 E.07274 G1 X-44.508 Y33.839 E.02689 G3 X-46.474 Y34.496 I-1.487 J-1.178 E.07274 G3 X-47.784 Y33.465 I6.475 J-9.574 E.05536 G1 X-48.537 Y33.285 E.02568 G1 X-48.537 Y35.921 E.08745 G1 X-47.784 Y35.982 E.02505 G1 X-47.129 Y36.459 E.02689 G2 X-45.163 Y37.117 I1.487 J-1.178 E.07274 G1 X-44.508 Y36.64 E.02689 G3 X-42.543 Y35.982 I1.487 J1.178 E.07274 G1 X-41.888 Y36.459 E.02689 G2 X-39.922 Y37.117 I1.487 J-1.178 E.07274 G1 X-39.267 Y36.64 E.02689 G3 X-37.301 Y35.982 I1.487 J1.178 E.07274 G1 X-36.646 Y36.459 E.02689 G2 X-34.681 Y37.117 I1.487 J-1.178 E.07274 G1 X-34.026 Y36.64 E.02689 G3 X-32.06 Y35.982 I1.487 J1.178 E.07274 G1 X-31.405 Y36.459 E.02689 G2 X-29.44 Y37.117 I1.487 J-1.178 E.07274 G1 X-28.784 Y36.64 E.02689 G3 X-26.819 Y35.982 I1.487 J1.178 E.07274 G1 X-26.164 Y36.459 E.02689 G2 X-24.198 Y37.117 I1.487 J-1.178 E.07274 G1 X-23.543 Y36.64 E.02689 G3 X-21.578 Y35.982 I1.487 J1.178 E.07274 G1 X-20.922 Y36.459 E.02689 G2 X-18.957 Y37.117 I1.487 J-1.178 E.07274 G1 X-18.302 Y36.64 E.02689 G3 X-16.336 Y35.982 I1.487 J1.178 E.07274 G1 X-15.681 Y36.459 E.02689 G2 X-13.716 Y37.117 I1.487 J-1.178 E.07274 G1 X-13.06 Y36.64 E.02689 G3 X-11.095 Y35.982 I1.487 J1.178 E.07274 G1 X-10.44 Y36.459 E.02689 G2 X-8.474 Y37.117 I1.487 J-1.178 E.07274 G1 X-7.819 Y36.64 E.02689 G3 X-5.854 Y35.982 I1.487 J1.178 E.07274 G1 X-5.198 Y36.459 E.02689 G2 X-3.233 Y37.117 I1.487 J-1.178 E.07274 G1 X-2.578 Y36.64 E.02689 G3 X-.612 Y35.982 I1.487 J1.178 E.07274 G1 X.043 Y36.459 E.02689 G2 X2.008 Y37.117 I1.487 J-1.178 E.07274 G1 X2.663 Y36.64 E.02689 G3 X4.629 Y35.982 I1.487 J1.178 E.07274 G1 X5.284 Y36.459 E.02689 G2 X7.25 Y37.117 I1.487 J-1.178 E.07274 G1 X7.905 Y36.64 E.02689 G3 X9.87 Y35.982 I1.487 J1.178 E.07274 G1 X10.525 Y36.459 E.02689 G2 X12.491 Y37.117 I1.487 J-1.178 E.07274 G1 X13.146 Y36.64 E.02689 G3 X15.112 Y35.982 I1.487 J1.178 E.07274 G1 X15.767 Y36.459 E.02689 G2 X17.732 Y37.117 I1.487 J-1.178 E.07274 G1 X18.387 Y36.64 E.02689 G3 X20.353 Y35.982 I1.487 J1.178 E.07274 G1 X21.008 Y36.459 E.02689 G2 X22.974 Y37.117 I1.487 J-1.178 E.07274 G1 X23.629 Y36.64 E.02689 G3 X25.594 Y35.982 I1.487 J1.178 E.07274 G3 X26.905 Y37.013 I-6.475 J9.574 E.05536 G1 X27.56 Y37.207 E.02266 G1 X27.937 Y37.155 E.01263 G1 X27.937 Y34.475 E.08891 G1 X27.56 Y34.586 E.01305 G1 X26.905 Y34.496 E.02194 G1 X26.249 Y34.019 E.02689 G2 X24.284 Y33.361 I-1.487 J1.178 E.07274 G1 X23.629 Y33.839 E.02689 G3 X21.663 Y34.496 I-1.487 J-1.178 E.07274 G1 X21.008 Y34.019 E.02689 G2 X19.043 Y33.361 I-1.487 J1.178 E.07274 G1 X18.387 Y33.839 E.02689 G3 X16.422 Y34.496 I-1.487 J-1.178 E.07274 G1 X15.767 Y34.019 E.02689 G2 X13.801 Y33.361 I-1.487 J1.178 E.07274 G1 X13.146 Y33.839 E.02689 G3 X11.181 Y34.496 I-1.487 J-1.178 E.07274 G1 X10.525 Y34.019 E.02689 G2 X8.56 Y33.361 I-1.487 J1.178 E.07274 G1 X7.905 Y33.839 E.02689 G3 X5.939 Y34.496 I-1.487 J-1.178 E.07274 G3 X4.963 Y33.747 I4.689 J-7.123 E.04085 G1 X4.963 Y34.263 E.01711 G1 X2.161 Y34.263 E.09294 G3 X.698 Y34.496 I-.984 J-1.466 E.05072 G1 X.378 Y34.263 E.01313 G1 X-1.25 Y34.263 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X.378 Y34.263 G1 X.678 Y34.482 ;WIPE_END G1 X3.594 Y27.428 Z1.8 F30000 G1 X4.963 Y24.114 Z1.8 G1 Z1.4 G1 E.8 F1800 G1 F16200 G1 X4.963 Y25.743 E.05401 G1 X5.284 Y25.977 E.01318 G2 X7.25 Y26.634 I1.487 J-1.178 E.07274 G1 X7.905 Y26.157 E.02689 G3 X9.87 Y25.499 I1.487 J1.178 E.07274 G1 X10.525 Y25.977 E.02689 G2 X12.491 Y26.634 I1.487 J-1.178 E.07274 G1 X13.146 Y26.157 E.02689 G3 X15.112 Y25.499 I1.487 J1.178 E.07274 G1 X15.767 Y25.977 E.02689 G2 X17.732 Y26.634 I1.487 J-1.178 E.07274 G1 X18.387 Y26.157 E.02689 G3 X20.353 Y25.499 I1.487 J1.178 E.07274 G3 X21.663 Y26.531 I-6.475 J9.575 E.05536 G1 X21.937 Y26.611 E.00947 G1 X21.937 Y24.051 E.08493 G1 X21.663 Y24.014 E.00916 G1 X21.008 Y23.536 E.02689 G2 X19.043 Y22.878 I-1.487 J1.178 E.07274 G1 X18.387 Y23.356 E.02689 G3 X16.422 Y24.014 I-1.487 J-1.178 E.07274 G1 X15.767 Y23.536 E.02689 G2 X13.801 Y22.878 I-1.487 J1.178 E.07274 G1 X13.146 Y23.356 E.02689 G3 X11.181 Y24.014 I-1.487 J-1.178 E.07274 G1 X10.525 Y23.536 E.02689 G2 X8.56 Y22.878 I-1.487 J1.178 E.07274 G1 X7.905 Y23.356 E.02689 G3 X5.939 Y24.014 I-1.487 J-1.178 E.07274 G1 X5.284 Y23.536 E.02689 G2 X3.319 Y22.878 I-1.487 J1.178 E.07274 G2 X2.213 Y23.737 I5.381 J8.073 E.04647 G1 X.318 Y23.737 E.06285 G1 X.043 Y23.536 E.0113 G2 X-1.923 Y22.878 I-1.487 J1.178 E.07274 G2 X-3.028 Y23.737 I5.381 J8.073 E.04647 G1 X-4.923 Y23.737 E.06285 G1 X-5.198 Y23.536 E.0113 G2 X-7.164 Y22.878 I-1.487 J1.178 E.07274 G2 X-8.27 Y23.737 I5.381 J8.073 E.04647 G1 X-10.165 Y23.737 E.06285 G1 X-10.44 Y23.536 E.0113 G2 X-12.405 Y22.878 I-1.487 J1.178 E.07274 G2 X-13.511 Y23.737 I5.381 J8.073 E.04647 G1 X-15.406 Y23.737 E.06285 G1 X-15.681 Y23.536 E.0113 G2 X-17.647 Y22.878 I-1.487 J1.178 E.07274 G2 X-18.752 Y23.737 I5.381 J8.073 E.04647 G1 X-20.647 Y23.737 E.06285 G1 X-20.922 Y23.536 E.0113 G2 X-22.888 Y22.878 I-1.487 J1.178 E.07274 G2 X-23.994 Y23.737 I5.381 J8.073 E.04647 G1 X-25.563 Y23.737 E.05206 G1 X-25.563 Y23.974 E.00786 G1 X-26.164 Y23.536 E.02465 G2 X-28.129 Y22.878 I-1.487 J1.178 E.07274 G1 X-28.784 Y23.356 E.02689 G3 X-30.75 Y24.014 I-1.487 J-1.178 E.07274 G1 X-31.405 Y23.536 E.02689 G2 X-33.37 Y22.878 I-1.487 J1.178 E.07274 G1 X-34.026 Y23.356 E.02689 G3 X-35.991 Y24.014 I-1.487 J-1.178 E.07274 G1 X-36.646 Y23.536 E.02689 G2 X-38.612 Y22.878 I-1.487 J1.178 E.07274 G1 X-39.267 Y23.356 E.02689 G3 X-41.232 Y24.014 I-1.487 J-1.178 E.07274 G3 X-42.537 Y22.987 I6.444 J-9.531 E.05511 G1 X-42.537 Y25.503 E.08347 G1 X-41.888 Y25.977 E.02665 G2 X-39.922 Y26.634 I1.487 J-1.178 E.07274 G1 X-39.267 Y26.157 E.02689 G3 X-37.301 Y25.499 I1.487 J1.178 E.07274 G1 X-36.646 Y25.977 E.02689 G2 X-34.681 Y26.634 I1.487 J-1.178 E.07274 G1 X-34.026 Y26.157 E.02689 G3 X-32.06 Y25.499 I1.487 J1.178 E.07274 G1 X-31.405 Y25.977 E.02689 G2 X-29.44 Y26.634 I1.487 J-1.178 E.07274 G1 X-28.784 Y26.157 E.02689 G3 X-26.819 Y25.499 I1.487 J1.178 E.07274 G3 X-25.563 Y26.484 I-6.184 J9.174 E.05299 G1 X-25.563 Y28.113 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-25.563 Y26.484 G1 X-25.856 Y26.255 ;WIPE_END G1 X-21.055 Y20.321 Z1.8 F30000 G1 X-16.155 Y14.263 Z1.8 G1 Z1.4 G1 E.8 F1800 G1 F16200 G1 X-16.037 Y14.263 E.00392 G1 X-16.037 Y12.753 E.0501 G1 X-15.681 Y13.054 E.01546 G2 X-13.716 Y13.427 I1.234 J-1.136 E.07111 G1 X-13.06 Y12.873 E.02846 G3 X-11.095 Y12.5 I1.234 J1.136 E.07111 G1 X-10.44 Y13.054 E.02846 G2 X-8.474 Y13.427 I1.234 J-1.136 E.07111 G1 X-7.819 Y12.873 E.02846 G3 X-5.854 Y12.5 I1.234 J1.136 E.07111 G2 X-4.563 Y13.517 I7.676 J-8.413 E.05455 G1 X-4.563 Y10.79 E.09045 G1 X-5.198 Y10.253 E.0276 G2 X-7.164 Y9.879 I-1.234 J1.136 E.07111 G1 X-7.819 Y10.433 E.02846 G3 X-9.785 Y10.807 I-1.234 J-1.136 E.07111 G1 X-10.44 Y10.253 E.02846 G2 X-12.405 Y9.879 I-1.234 J1.136 E.07111 G1 X-13.06 Y10.433 E.02846 G3 X-15.026 Y10.807 I-1.234 J-1.136 E.07111 G2 X-16.037 Y9.993 I-6.128 J6.582 E.04308 G1 X-16.037 Y7.512 E.08233 G1 X-15.681 Y7.812 E.01546 G2 X-13.716 Y8.186 I1.234 J-1.136 E.07111 G1 X-13.06 Y7.632 E.02846 G3 X-11.095 Y7.258 I1.234 J1.136 E.07111 G1 X-10.44 Y7.812 E.02846 G2 X-8.474 Y8.186 I1.234 J-1.136 E.07111 G1 X-7.819 Y7.632 E.02846 G3 X-5.854 Y7.258 I1.234 J1.136 E.07111 G2 X-4.563 Y8.275 I7.676 J-8.413 E.05455 G1 X-4.563 Y5.549 E.09045 G1 X-5.198 Y5.011 E.0276 G2 X-7.164 Y4.638 I-1.234 J1.136 E.07111 G1 X-7.819 Y5.192 E.02846 G3 X-9.785 Y5.565 I-1.234 J-1.136 E.07111 G1 X-10.44 Y5.011 E.02846 G2 X-12.405 Y4.638 I-1.234 J1.136 E.07111 G1 X-13.06 Y5.192 E.02846 G3 X-15.026 Y5.565 I-1.234 J-1.136 E.07111 G2 X-16.037 Y4.752 I-6.128 J6.582 E.04308 G1 X-16.037 Y2.27 E.08233 G1 X-15.681 Y2.571 E.01546 G2 X-13.716 Y2.945 I1.234 J-1.136 E.07111 G1 X-13.06 Y2.391 E.02846 G3 X-11.095 Y2.017 I1.234 J1.136 E.07111 G1 X-10.44 Y2.571 E.02846 G2 X-8.474 Y2.945 I1.234 J-1.136 E.07111 G1 X-7.819 Y2.391 E.02846 G3 X-5.854 Y2.017 I1.234 J1.136 E.07111 G2 X-4.563 Y3.034 I7.676 J-8.413 E.05455 G1 X-4.563 Y.307 E.09045 G1 X-5.198 Y-.23 E.0276 G2 X-7.164 Y-.604 I-1.234 J1.136 E.07111 G1 X-7.819 Y-.05 E.02846 G3 X-9.785 Y.324 I-1.234 J-1.136 E.07111 G1 X-10.44 Y-.23 E.02846 G2 X-12.405 Y-.604 I-1.234 J1.136 E.07111 G1 X-13.06 Y-.05 E.02846 G3 X-15.026 Y.324 I-1.234 J-1.136 E.07111 G2 X-16.037 Y-.489 I-6.128 J6.582 E.04308 G1 X-16.037 Y-2.118 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-16.037 Y-.489 G1 X-15.747 Y-.256 ;WIPE_END G1 X-23.376 Y-.487 Z1.8 F30000 G1 X-49.135 Y-1.264 Z1.8 G1 Z1.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.409519 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385478 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342222 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305487 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275112 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276404 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307218 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344557 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.393963 G2 X-49.135 Y1.264 I8.176 J-1.358 E.0117 G1 X-47.554 Y3.147 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-45.819 Y3.138 I.836 J-6.489 E.05773 G1 X-45.163 Y2.945 E.02266 G1 X-44.508 Y2.391 E.02846 G3 X-42.543 Y2.017 I1.234 J1.136 E.07111 G1 X-41.888 Y2.571 E.02846 G2 X-39.922 Y2.945 I1.234 J-1.136 E.07111 G1 X-39.267 Y2.391 E.02846 G3 X-37.301 Y2.017 I1.234 J1.136 E.07111 G1 X-36.646 Y2.571 E.02846 G2 X-34.681 Y2.945 I1.234 J-1.136 E.07111 G1 X-34.026 Y2.391 E.02846 G3 X-32.06 Y2.017 I1.234 J1.136 E.07111 G2 X-31.035 Y2.84 I6.204 J-6.673 E.04364 G2 X-32.792 Y4.467 I.868 J2.7 E.08199 G1 X-33.37 Y4.638 E.02 G1 X-34.026 Y5.192 E.02846 G3 X-35.991 Y5.565 I-1.234 J-1.136 E.07111 G1 X-36.646 Y5.011 E.02846 G2 X-38.612 Y4.638 I-1.234 J1.136 E.07111 G1 X-39.267 Y5.192 E.02846 G3 X-41.232 Y5.565 I-1.234 J-1.136 E.07111 G1 X-41.888 Y5.011 E.02846 G2 X-43.853 Y4.638 I-1.234 J1.136 E.07111 G1 X-44.508 Y5.192 E.02846 G3 X-46.474 Y5.565 I-1.234 J-1.136 E.07111 G2 X-47.784 Y4.534 I-7.785 J8.543 E.05536 G1 X-48.537 Y4.473 E.02505 G1 X-48.537 Y7.078 E.08642 G1 X-47.784 Y7.258 E.02568 G1 X-47.129 Y7.812 E.02846 G2 X-45.163 Y8.186 I1.234 J-1.136 E.07111 G1 X-44.508 Y7.632 E.02846 G3 X-42.543 Y7.258 I1.234 J1.136 E.07111 G1 X-41.888 Y7.812 E.02846 G2 X-39.922 Y8.186 I1.234 J-1.136 E.07111 G1 X-39.267 Y7.632 E.02846 G3 X-37.301 Y7.258 I1.234 J1.136 E.07111 G1 X-36.646 Y7.812 E.02846 G2 X-34.681 Y8.186 I1.234 J-1.136 E.07111 G3 X-33.37 Y7.155 I7.786 J8.543 E.05536 G1 X-32.715 Y7.065 E.02194 G1 X-32.26 Y7.199 E.01574 G2 X-31.368 Y7.839 I2.742 J-2.881 E.03654 G2 X-29.44 Y8.186 I1.201 J-1.141 E.06955 G1 X-29.363 Y8.121 E.00332 G1 X-29.363 Y9.75 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-29.363 Y8.121 G1 X-29.44 Y8.186 G1 X-29.7 Y8.263 ;WIPE_END G1 X-29.363 Y2 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 G1 F16200 G1 X-29.363 Y.372 E.05401 G1 X-29.44 Y.428 E.00314 G3 X-31.405 Y-.23 I-.478 J-1.836 E.07274 G1 X-32.06 Y-.707 E.02689 G2 X-34.026 Y-.05 I-.478 J1.836 E.07274 G1 X-34.681 Y.428 E.02689 G3 X-36.646 Y-.23 I-.478 J-1.836 E.07274 G1 X-37.301 Y-.707 E.02689 G2 X-39.267 Y-.05 I-.478 J1.836 E.07274 G1 X-39.922 Y.428 E.02689 G3 X-41.888 Y-.23 I-.478 J-1.836 E.07274 G1 X-42.543 Y-.707 E.02689 G1 X-43.198 Y-.797 E.02194 G1 X-43.632 Y-.669 E.01501 G2 X-44.837 Y-2.573 I-3.354 J.79 E.07614 G3 X-43.853 Y-3.328 I5.714 J6.424 E.04118 G3 X-41.888 Y-2.67 I.478 J1.836 E.07274 G1 X-41.232 Y-2.193 E.02689 G2 X-39.267 Y-2.851 I.478 J-1.836 E.07274 G1 X-38.612 Y-3.328 E.02689 G3 X-36.646 Y-2.67 I.478 J1.836 E.07274 G1 X-35.991 Y-2.193 E.02689 G2 X-34.026 Y-2.851 I.478 J-1.836 E.07274 G1 X-33.37 Y-3.328 E.02689 G3 X-31.405 Y-2.67 I.478 J1.836 E.07274 G1 X-30.75 Y-2.193 E.02689 G2 X-28.784 Y-2.851 I.478 J-1.836 E.07274 G1 X-28.129 Y-3.328 E.02689 G3 X-26.164 Y-2.67 I.478 J1.836 E.07274 G1 X-25.605 Y-2.263 E.02293 G1 X-24.198 Y-2.297 E.04668 G3 X-22.888 Y-3.328 I7.785 J8.543 E.05536 G3 X-20.922 Y-2.67 I.478 J1.836 E.07274 G1 X-20.364 Y-2.263 E.02293 G1 X-18.957 Y-2.297 E.04668 G3 X-17.647 Y-3.328 I7.786 J8.543 E.05536 G3 X-15.681 Y-2.67 I.478 J1.836 E.07274 G1 X-15.026 Y-2.193 E.02689 G2 X-13.06 Y-2.851 I.478 J-1.836 E.07274 G1 X-12.405 Y-3.328 E.02689 G3 X-10.44 Y-2.67 I.478 J1.836 E.07274 G1 X-9.785 Y-2.193 E.02689 G2 X-7.819 Y-2.851 I.478 J-1.836 E.07274 G1 X-7.164 Y-3.328 E.02689 G3 X-5.198 Y-2.67 I.478 J1.836 E.07274 G1 X-4.563 Y-2.207 E.02608 G1 X-4.563 Y-2.263 E.00185 G1 X-3.233 Y-2.297 E.04414 G3 X-1.923 Y-3.328 I7.785 J8.543 E.05536 G3 X.043 Y-2.67 I.478 J1.836 E.07274 G1 X.602 Y-2.263 E.02293 G1 X2.008 Y-2.297 E.04668 G3 X3.319 Y-3.328 I7.785 J8.543 E.05536 G3 X5.284 Y-2.67 I.478 J1.836 E.07274 G1 X5.843 Y-2.263 E.02293 G1 X7.25 Y-2.297 E.04668 G3 X8.56 Y-3.328 I7.785 J8.543 E.05536 G3 X10.525 Y-2.67 I.478 J1.836 E.07274 G1 X11.181 Y-2.193 E.02689 G2 X13.146 Y-2.851 I.478 J-1.836 E.07274 G1 X13.801 Y-3.328 E.02689 G3 X15.767 Y-2.67 I.478 J1.836 E.07274 G1 X16.422 Y-2.193 E.02689 G2 X18.387 Y-2.851 I.478 J-1.836 E.07274 G1 X19.043 Y-3.328 E.02689 G3 X21.008 Y-2.67 I.478 J1.836 E.07274 G1 X21.663 Y-2.193 E.02689 G2 X23.629 Y-2.851 I.478 J-1.836 E.07274 G1 X24.284 Y-3.328 E.02689 G3 X25.637 Y-3.188 I.533 J1.453 E.04674 G3 X27.243 Y-3.063 I.526 J3.641 E.05385 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393964 G1 F12000 G3 X28.611 Y-.863 I-8.117 J1.763 E.0117 ;WIDTH:0.344557 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.307218 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.38548 G1 X28.591 Y.981 E.00334 ;WIDTH:0.40952 G1 X28.535 Y1.264 E.00864 G1 X27.937 Y4.655 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X27.937 Y3.027 E.05401 G3 X27.14 Y3.1 I-.576 J-1.901 E.02671 G3 X25.571 Y3.178 I-.947 J-3.234 E.05262 G1 X27.937 Y9.32 F30000 G1 F16200 G1 X27.937 Y10.949 E.05401 G1 X27.56 Y11 E.01263 G1 X26.905 Y10.807 E.02266 G2 X25.594 Y9.775 I-7.785 J8.543 E.05536 G2 X23.629 Y10.433 I-.478 J1.836 E.07274 G1 X22.974 Y10.91 E.02689 G3 X21.008 Y10.253 I-.478 J-1.836 E.07274 G1 X20.353 Y9.775 E.02689 G2 X18.387 Y10.433 I-.478 J1.836 E.07274 G1 X17.732 Y10.91 E.02689 G3 X15.767 Y10.253 I-.478 J-1.836 E.07274 G1 X15.112 Y9.775 E.02689 G2 X13.146 Y10.433 I-.478 J1.836 E.07274 G1 X12.491 Y10.91 E.02689 G3 X10.525 Y10.253 I-.478 J-1.836 E.07274 G1 X9.87 Y9.775 E.02689 G1 X9.215 Y9.685 E.02194 G1 X8.763 Y9.819 E.01564 G1 X8.763 Y12.368 E.08456 G1 X9.215 Y12.306 E.01513 G1 X9.87 Y12.5 E.02266 G2 X11.181 Y13.531 I7.785 J-8.543 E.05536 G2 X13.146 Y12.873 I.478 J-1.836 E.07274 G1 X13.801 Y12.396 E.02689 G3 X15.767 Y13.054 I.478 J1.836 E.07274 G1 X16.422 Y13.531 E.02689 G2 X18.387 Y12.873 I.478 J-1.836 E.07274 G1 X19.043 Y12.396 E.02689 G3 X21.008 Y13.054 I.478 J1.836 E.07274 G1 X21.663 Y13.531 E.02689 G2 X23.629 Y12.873 I.478 J-1.836 E.07274 G1 X24.284 Y12.396 E.02689 G3 X26.249 Y13.054 I.478 J1.836 E.07274 G1 X26.905 Y13.531 E.02689 G1 X27.56 Y13.621 E.02194 G1 X27.937 Y13.509 E.01305 G1 X27.937 Y16.19 E.08891 G1 X27.56 Y16.242 E.01263 G1 X26.905 Y16.048 E.02266 G2 X25.594 Y15.017 I-7.786 J8.543 E.05536 G2 X23.629 Y15.674 I-.478 J1.836 E.07274 G1 X22.974 Y16.152 E.02689 G3 X21.008 Y15.494 I-.478 J-1.836 E.07274 G1 X20.353 Y15.017 E.02689 G2 X18.387 Y15.674 I-.478 J1.836 E.07274 G1 X17.732 Y16.152 E.02689 G3 X15.767 Y15.494 I-.478 J-1.836 E.07274 G1 X15.112 Y15.017 E.02689 G2 X13.146 Y15.674 I-.478 J1.836 E.07274 G1 X12.491 Y16.152 E.02689 G3 X10.525 Y15.494 I-.478 J-1.836 E.07274 G1 X9.87 Y15.017 E.02689 G2 X7.905 Y15.674 I-.478 J1.836 E.07274 G1 X7.25 Y16.152 E.02689 G3 X5.284 Y15.494 I-.478 J-1.836 E.07274 G1 X4.629 Y15.017 E.02689 G2 X2.663 Y15.674 I-.478 J1.836 E.07274 G1 X2.008 Y16.152 E.02689 G3 X.043 Y15.494 I-.478 J-1.836 E.07274 G1 X-.612 Y15.017 E.02689 G2 X-2.578 Y15.674 I-.478 J1.836 E.07274 G1 X-3.233 Y16.152 E.02689 G3 X-5.198 Y15.494 I-.478 J-1.836 E.07274 G1 X-5.854 Y15.017 E.02689 G2 X-7.819 Y15.674 I-.478 J1.836 E.07274 G1 X-8.474 Y16.152 E.02689 G3 X-10.44 Y15.494 I-.478 J-1.836 E.07274 G1 X-11.095 Y15.017 E.02689 G2 X-13.06 Y15.674 I-.478 J1.836 E.07274 G1 X-13.716 Y16.152 E.02689 G3 X-15.681 Y15.494 I-.478 J-1.836 E.07274 G1 X-16.336 Y15.017 E.02689 G2 X-18.302 Y15.674 I-.478 J1.836 E.07274 G1 X-18.957 Y16.152 E.02689 G3 X-20.922 Y15.494 I-.478 J-1.836 E.07274 G1 X-21.578 Y15.017 E.02689 G2 X-23.543 Y15.674 I-.478 J1.836 E.07274 G1 X-24.198 Y16.152 E.02689 G3 X-26.164 Y15.494 I-.478 J-1.836 E.07274 G1 X-26.819 Y15.017 E.02689 G2 X-28.784 Y15.674 I-.478 J1.836 E.07274 G1 X-29.44 Y16.152 E.02689 G3 X-31.405 Y15.494 I-.478 J-1.836 E.07274 G1 X-32.06 Y15.017 E.02689 G2 X-34.026 Y15.674 I-.478 J1.836 E.07274 G1 X-34.681 Y16.152 E.02689 G3 X-36.646 Y15.494 I-.478 J-1.836 E.07274 G1 X-37.301 Y15.017 E.02689 G2 X-39.267 Y15.674 I-.478 J1.836 E.07274 G1 X-39.922 Y16.152 E.02689 G3 X-41.888 Y15.494 I-.478 J-1.836 E.07274 G1 X-42.543 Y15.017 E.02689 G2 X-44.508 Y15.674 I-.478 J1.836 E.07274 G1 X-45.163 Y16.152 E.02689 G3 X-47.129 Y15.494 I-.478 J-1.836 E.07274 G1 X-47.784 Y15.017 E.02689 G1 X-48.537 Y14.955 E.02505 G1 X-48.537 Y12.319 E.08745 G1 X-47.784 Y12.5 E.02568 G2 X-46.474 Y13.531 I7.785 J-8.543 E.05536 G2 X-44.508 Y12.873 I.478 J-1.836 E.07274 G1 X-43.853 Y12.396 E.02689 G3 X-41.888 Y13.054 I.478 J1.836 E.07274 G1 X-41.232 Y13.531 E.02689 G2 X-39.267 Y12.873 I.478 J-1.836 E.07274 G1 X-38.612 Y12.396 E.02689 G3 X-36.646 Y13.054 I.478 J1.836 E.07274 G1 X-35.991 Y13.531 E.02689 G2 X-34.026 Y12.873 I.478 J-1.836 E.07274 G1 X-33.37 Y12.396 E.02689 G3 X-31.405 Y13.054 I.478 J1.836 E.07274 G1 X-30.75 Y13.531 E.02689 G2 X-29.363 Y13.363 I.478 J-1.855 E.04743 G1 X-29.363 Y10.855 E.08319 G1 X-29.44 Y10.91 E.00314 G3 X-31.405 Y10.253 I-.478 J-1.836 E.07274 G1 X-32.06 Y9.775 E.02689 G2 X-34.026 Y10.433 I-.478 J1.836 E.07274 G1 X-34.681 Y10.91 E.02689 G3 X-36.646 Y10.253 I-.478 J-1.836 E.07274 G1 X-37.301 Y9.775 E.02689 G2 X-39.267 Y10.433 I-.478 J1.836 E.07274 G1 X-39.922 Y10.91 E.02689 G3 X-41.888 Y10.253 I-.478 J-1.836 E.07274 G1 X-42.543 Y9.775 E.02689 G2 X-44.508 Y10.433 I-.478 J1.836 E.07274 G1 X-45.163 Y10.91 E.02689 G3 X-47.129 Y10.253 I-.478 J-1.836 E.07274 G1 X-47.784 Y9.775 E.02689 G1 X-48.537 Y9.714 E.02505 G1 X-48.537 Y8.086 E.05401 G1 X-48.3 Y32.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y17.744 E.57795 G1 X-45.618 Y17.737 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-43.99 Y17.737 E.05401 G1 X-43.853 Y17.637 E.00562 G3 X-42.537 Y17.746 I.539 J1.495 E.04518 G2 X-41.232 Y18.772 I7.748 J-8.505 E.05511 G2 X-39.267 Y18.115 I.478 J-1.836 E.07274 G1 X-38.612 Y17.637 E.02689 G3 X-36.646 Y18.295 I.478 J1.836 E.07274 G1 X-35.991 Y18.772 E.02689 G2 X-34.026 Y18.115 I.478 J-1.836 E.07274 G1 X-33.37 Y17.637 E.02689 G3 X-31.405 Y18.295 I.478 J1.836 E.07274 G1 X-30.75 Y18.772 E.02689 G2 X-28.784 Y18.115 I.478 J-1.836 E.07274 G1 X-28.129 Y17.637 E.02689 G3 X-26.164 Y18.295 I.478 J1.836 E.07274 G1 X-25.509 Y18.772 E.02689 G2 X-23.543 Y18.115 I.478 J-1.836 E.07274 G1 X-22.888 Y17.637 E.02689 G3 X-20.922 Y18.295 I.478 J1.836 E.07274 G1 X-20.267 Y18.772 E.02689 G2 X-18.302 Y18.115 I.478 J-1.836 E.07274 G1 X-17.647 Y17.637 E.02689 G3 X-15.681 Y18.295 I.478 J1.836 E.07274 G1 X-15.026 Y18.772 E.02689 G2 X-13.06 Y18.115 I.478 J-1.836 E.07274 G1 X-12.405 Y17.637 E.02689 G3 X-10.44 Y18.295 I.478 J1.836 E.07274 G1 X-9.785 Y18.772 E.02689 G2 X-7.819 Y18.115 I.478 J-1.836 E.07274 G1 X-7.164 Y17.637 E.02689 G3 X-5.198 Y18.295 I.478 J1.836 E.07274 G1 X-4.543 Y18.772 E.02689 G2 X-2.578 Y18.115 I.478 J-1.836 E.07274 G1 X-1.923 Y17.637 E.02689 G3 X.043 Y18.295 I.478 J1.836 E.07274 G1 X.698 Y18.772 E.02689 G2 X2.663 Y18.115 I.478 J-1.836 E.07274 G1 X3.319 Y17.637 E.02689 G3 X5.284 Y18.295 I.478 J1.836 E.07274 G1 X5.939 Y18.772 E.02689 G2 X7.905 Y18.115 I.478 J-1.836 E.07274 G1 X8.56 Y17.637 E.02689 G3 X10.525 Y18.295 I.478 J1.836 E.07274 G1 X11.181 Y18.772 E.02689 G2 X13.146 Y18.115 I.478 J-1.836 E.07274 G1 X13.801 Y17.637 E.02689 G3 X15.767 Y18.295 I.478 J1.836 E.07274 G1 X16.422 Y18.772 E.02689 G2 X18.387 Y18.115 I.478 J-1.836 E.07274 G1 X19.043 Y17.637 E.02689 G3 X21.008 Y18.295 I.478 J1.836 E.07274 G1 X21.663 Y18.772 E.02689 G1 X21.937 Y18.81 E.00916 G1 X21.937 Y21.37 E.08493 G1 X21.663 Y21.289 E.00947 G2 X20.353 Y20.258 I-7.786 J8.543 E.05536 G2 X18.387 Y20.916 I-.478 J1.836 E.07274 G1 X17.732 Y21.393 E.02689 G3 X15.767 Y20.735 I-.478 J-1.836 E.07274 G1 X15.112 Y20.258 E.02689 G2 X13.146 Y20.916 I-.478 J1.836 E.07274 G1 X12.491 Y21.393 E.02689 G3 X10.525 Y20.735 I-.478 J-1.836 E.07274 G1 X9.87 Y20.258 E.02689 G2 X7.905 Y20.916 I-.478 J1.836 E.07274 G1 X7.25 Y21.393 E.02689 G3 X5.284 Y20.735 I-.478 J-1.836 E.07274 G1 X4.629 Y20.258 E.02689 G2 X2.663 Y20.916 I-.478 J1.836 E.07274 G1 X2.008 Y21.393 E.02689 G3 X.043 Y20.735 I-.478 J-1.836 E.07274 G1 X-.612 Y20.258 E.02689 G2 X-2.578 Y20.916 I-.478 J1.836 E.07274 G1 X-3.233 Y21.393 E.02689 G3 X-5.198 Y20.735 I-.478 J-1.836 E.07274 G1 X-5.854 Y20.258 E.02689 G2 X-7.819 Y20.916 I-.478 J1.836 E.07274 G1 X-8.474 Y21.393 E.02689 G3 X-10.44 Y20.735 I-.478 J-1.836 E.07274 G1 X-11.095 Y20.258 E.02689 G2 X-13.06 Y20.916 I-.478 J1.836 E.07274 G1 X-13.716 Y21.393 E.02689 G3 X-15.681 Y20.735 I-.478 J-1.836 E.07274 G1 X-16.336 Y20.258 E.02689 G2 X-18.302 Y20.916 I-.478 J1.836 E.07274 G1 X-18.957 Y21.393 E.02689 G3 X-20.922 Y20.735 I-.478 J-1.836 E.07274 G1 X-21.578 Y20.258 E.02689 G2 X-23.543 Y20.916 I-.478 J1.836 E.07274 G1 X-24.198 Y21.393 E.02689 G3 X-26.164 Y20.735 I-.478 J-1.836 E.07274 G1 X-26.819 Y20.258 E.02689 G2 X-28.784 Y20.916 I-.478 J1.836 E.07274 G1 X-29.44 Y21.393 E.02689 G3 X-31.405 Y20.735 I-.478 J-1.836 E.07274 G1 X-32.06 Y20.258 E.02689 G2 X-34.026 Y20.916 I-.478 J1.836 E.07274 G1 X-34.681 Y21.393 E.02689 G3 X-36.646 Y20.735 I-.478 J-1.836 E.07274 G1 X-37.301 Y20.258 E.02689 G2 X-39.267 Y20.916 I-.478 J1.836 E.07274 G1 X-39.922 Y21.393 E.02689 G3 X-41.888 Y20.735 I-.478 J-1.836 E.07274 G1 X-42.537 Y20.262 E.02665 G1 X-42.537 Y21.89 E.05401 G1 X-42.537 Y26.6 F30000 G1 F16200 G1 X-42.537 Y28.229 E.05401 G2 X-41.232 Y29.255 I7.748 J-8.505 E.05511 G2 X-39.267 Y28.597 I.478 J-1.836 E.07274 G1 X-38.612 Y28.12 E.02689 G3 X-36.646 Y28.778 I.478 J1.836 E.07274 G1 X-35.991 Y29.255 E.02689 G2 X-34.026 Y28.597 I.478 J-1.836 E.07274 G1 X-33.37 Y28.12 E.02689 G3 X-31.405 Y28.778 I.478 J1.836 E.07274 G1 X-30.75 Y29.255 E.02689 G2 X-28.784 Y28.597 I.478 J-1.836 E.07274 G1 X-28.129 Y28.12 E.02689 G3 X-26.164 Y28.778 I.478 J1.836 E.07274 G1 X-25.563 Y29.215 E.02465 G1 X-25.563 Y31.726 E.08328 G2 X-26.819 Y30.74 I-7.439 J8.189 E.05299 G2 X-28.784 Y31.398 I-.478 J1.836 E.07274 G1 X-29.44 Y31.876 E.02689 G3 X-31.405 Y31.218 I-.478 J-1.836 E.07274 G1 X-32.06 Y30.74 E.02689 G2 X-34.026 Y31.398 I-.478 J1.836 E.07274 G1 X-34.681 Y31.876 E.02689 G3 X-36.646 Y31.218 I-.478 J-1.836 E.07274 G1 X-37.301 Y30.74 E.02689 G2 X-39.267 Y31.398 I-.478 J1.836 E.07274 G1 X-39.922 Y31.876 E.02689 G3 X-41.888 Y31.218 I-.478 J-1.836 E.07274 G1 X-42.537 Y30.745 E.02665 G1 X-42.537 Y32.263 E.05037 G1 X-42.647 Y32.263 E.00365 G1 X-40.472 Y59.737 F30000 G1 F16200 G1 X-38.844 Y59.737 E.05401 G1 X-38.612 Y59.568 E.00953 G3 X-37.224 Y59.737 I.478 J1.852 E.04747 G1 X-33.603 Y59.737 E.12013 G1 X-33.37 Y59.568 E.00953 G3 X-31.983 Y59.737 I.478 J1.852 E.04747 G1 X-28.361 Y59.737 E.12013 G1 X-28.129 Y59.568 E.00953 G3 X-26.741 Y59.737 I.478 J1.852 E.04747 G1 X-23.12 Y59.737 E.12013 G1 X-22.888 Y59.568 E.00953 G3 X-21.5 Y59.737 I.478 J1.852 E.04747 G1 X-17.879 Y59.737 E.12013 G1 X-17.647 Y59.568 E.00953 G3 X-16.259 Y59.737 I.478 J1.852 E.04747 G1 X-12.638 Y59.737 E.12013 G1 X-12.405 Y59.568 E.00953 G3 X-11.018 Y59.737 I.478 J1.852 E.04747 G1 X-7.396 Y59.737 E.12013 G1 X-7.164 Y59.568 E.00953 G3 X-5.776 Y59.737 I.478 J1.852 E.04747 G1 X-2.155 Y59.737 E.12013 G1 X-1.923 Y59.568 E.00953 G3 X-.535 Y59.737 I.478 J1.852 E.04747 G1 X3.086 Y59.737 E.12013 G1 X3.319 Y59.568 E.00953 G3 X4.706 Y59.737 I.478 J1.852 E.04747 G1 X8.328 Y59.737 E.12013 G1 X8.56 Y59.568 E.00953 G3 X9.948 Y59.737 I.478 J1.852 E.04747 G1 X13.569 Y59.737 E.12013 G1 X13.801 Y59.568 E.00953 G3 X15.189 Y59.737 I.478 J1.852 E.04747 G1 X18.81 Y59.737 E.12013 G1 X19.043 Y59.568 E.00953 G3 X20.43 Y59.737 I.478 J1.852 E.04747 G1 X21.641 Y59.737 E.04016 G3 X21.731 Y57.998 I3.009 J-.716 E.05854 G1 X21.663 Y57.978 E.00234 G2 X20.353 Y56.947 I-7.786 J8.543 E.05536 G2 X18.387 Y57.605 I-.478 J1.836 E.07274 G1 X17.732 Y58.082 E.02689 G3 X15.767 Y57.424 I-.478 J-1.836 E.07274 G1 X15.112 Y56.947 E.02689 G2 X13.146 Y57.605 I-.478 J1.836 E.07274 G1 X12.491 Y58.082 E.02689 G3 X10.525 Y57.424 I-.478 J-1.836 E.07274 G1 X9.87 Y56.947 E.02689 G2 X7.905 Y57.605 I-.478 J1.836 E.07274 G1 X7.25 Y58.082 E.02689 G3 X5.284 Y57.424 I-.478 J-1.836 E.07274 G1 X4.629 Y56.947 E.02689 G2 X2.663 Y57.605 I-.478 J1.836 E.07274 G1 X2.008 Y58.082 E.02689 G3 X.043 Y57.424 I-.478 J-1.836 E.07274 G1 X-.612 Y56.947 E.02689 G2 X-2.578 Y57.605 I-.478 J1.836 E.07274 G1 X-3.233 Y58.082 E.02689 G3 X-5.198 Y57.424 I-.478 J-1.836 E.07274 G1 X-5.854 Y56.947 E.02689 G2 X-7.819 Y57.605 I-.478 J1.836 E.07274 G1 X-8.474 Y58.082 E.02689 G3 X-10.44 Y57.424 I-.478 J-1.836 E.07274 G1 X-11.095 Y56.947 E.02689 G2 X-13.06 Y57.605 I-.478 J1.836 E.07274 G1 X-13.716 Y58.082 E.02689 G3 X-15.681 Y57.424 I-.478 J-1.836 E.07274 G1 X-16.336 Y56.947 E.02689 G2 X-18.302 Y57.605 I-.478 J1.836 E.07274 G1 X-18.957 Y58.082 E.02689 G3 X-20.922 Y57.424 I-.478 J-1.836 E.07274 G1 X-21.578 Y56.947 E.02689 G2 X-23.543 Y57.605 I-.478 J1.836 E.07274 G1 X-24.198 Y58.082 E.02689 G3 X-26.164 Y57.424 I-.478 J-1.836 E.07274 G1 X-26.819 Y56.947 E.02689 G2 X-28.784 Y57.605 I-.478 J1.836 E.07274 G1 X-29.44 Y58.082 E.02689 G3 X-31.405 Y57.424 I-.478 J-1.836 E.07274 G1 X-32.06 Y56.947 E.02689 G2 X-34.026 Y57.605 I-.478 J1.836 E.07274 G1 X-34.681 Y58.082 E.02689 G3 X-36.646 Y57.424 I-.478 J-1.836 E.07274 G1 X-37.301 Y56.947 E.02689 G2 X-39.267 Y57.605 I-.478 J1.836 E.07274 G1 X-39.922 Y58.082 E.02689 G3 X-41.888 Y57.424 I-.478 J-1.836 E.07274 G1 X-42.543 Y56.947 E.02689 G1 X-43.213 Y56.861 E.0224 G2 X-47.012 Y57.523 I-1.584 J2.143 E.14304 G2 X-47.784 Y56.947 I-4.368 J5.047 E.03197 G1 X-48.537 Y56.886 E.02505 G1 X-48.537 Y59.491 E.08642 G1 X-47.784 Y59.671 E.02568 G1 X-47.707 Y59.737 E.00336 G1 X-47.359 Y59.737 E.01153 G3 X-47.407 Y58.471 I2.618 J-.733 E.04243 G1 X-45.406 Y52.263 F30000 G1 F16200 G1 X-47.034 Y52.263 E.05401 G2 X-45.163 Y52.841 I1.392 J-1.189 E.06853 G2 X-44.39 Y52.263 I-3.607 J-5.639 E.03206 G1 X-42.537 Y52.263 E.06146 G1 X-42.537 Y51.71 E.01835 G3 X-41.232 Y52.737 I-6.448 J9.531 E.05512 G2 X-39.267 Y52.363 I.731 J-1.51 E.07111 G1 X-38.612 Y51.809 E.02846 G3 X-36.646 Y52.183 I.731 J1.51 E.07111 G1 X-35.991 Y52.737 E.02846 G2 X-34.026 Y52.363 I.731 J-1.51 E.07111 G1 X-33.37 Y51.809 E.02846 G3 X-31.405 Y52.183 I.731 J1.51 E.07111 G1 X-30.75 Y52.737 E.02846 G2 X-28.784 Y52.363 I.731 J-1.51 E.07111 G1 X-28.129 Y51.809 E.02846 G3 X-26.164 Y52.183 I.731 J1.51 E.07111 G1 X-25.509 Y52.737 E.02846 G2 X-23.543 Y52.363 I.731 J-1.51 E.07111 G1 X-22.888 Y51.809 E.02846 G3 X-20.922 Y52.183 I.731 J1.51 E.07111 G1 X-20.267 Y52.737 E.02846 G2 X-18.302 Y52.363 I.731 J-1.51 E.07111 G1 X-17.647 Y51.809 E.02846 G3 X-15.681 Y52.183 I.731 J1.51 E.07111 G1 X-15.026 Y52.737 E.02846 G2 X-13.06 Y52.363 I.731 J-1.51 E.07111 G1 X-12.405 Y51.809 E.02846 G3 X-10.44 Y52.183 I.731 J1.51 E.07111 G1 X-9.785 Y52.737 E.02846 G2 X-7.819 Y52.363 I.731 J-1.51 E.07111 G1 X-7.164 Y51.809 E.02846 G3 X-5.198 Y52.183 I.731 J1.51 E.07111 G1 X-4.543 Y52.737 E.02846 G2 X-2.578 Y52.363 I.731 J-1.51 E.07111 G1 X-1.923 Y51.809 E.02846 G3 X.043 Y52.183 I.731 J1.51 E.07111 G1 X.698 Y52.737 E.02846 G2 X2.663 Y52.363 I.731 J-1.51 E.07111 G1 X3.319 Y51.809 E.02846 G3 X5.284 Y52.183 I.731 J1.51 E.07111 G1 X5.939 Y52.737 E.02846 G2 X7.905 Y52.363 I.731 J-1.51 E.07111 G1 X8.56 Y51.809 E.02846 G3 X10.525 Y52.183 I.731 J1.51 E.07111 G1 X11.181 Y52.737 E.02846 G2 X13.146 Y52.363 I.731 J-1.51 E.07111 G1 X13.801 Y51.809 E.02846 G3 X15.767 Y52.183 I.731 J1.51 E.07111 G1 X16.422 Y52.737 E.02846 G2 X18.387 Y52.363 I.731 J-1.51 E.07111 G1 X19.043 Y51.809 E.02846 G3 X21.008 Y52.183 I.731 J1.51 E.07111 G1 X21.663 Y52.737 E.02846 G2 X23.629 Y52.363 I.731 J-1.51 E.07111 G1 X23.747 Y52.263 E.00516 G1 X26.344 Y52.263 E.08614 G2 X27.56 Y52.931 I1.367 J-1.048 E.04735 G1 X27.937 Y52.879 E.01263 G1 X27.937 Y55.44 E.08495 G1 X27.56 Y55.552 E.01305 G1 X26.905 Y55.462 E.02194 G3 X25.594 Y54.43 I6.475 J-9.575 E.05536 G2 X23.629 Y54.804 I-.731 J1.51 E.07111 G1 X22.974 Y55.358 E.02846 G3 X21.008 Y54.984 I-.731 J-1.51 E.07111 G1 X20.353 Y54.43 E.02846 G2 X18.387 Y54.804 I-.731 J1.51 E.07111 G1 X17.732 Y55.358 E.02846 G3 X15.767 Y54.984 I-.731 J-1.51 E.07111 G1 X15.112 Y54.43 E.02846 G2 X13.146 Y54.804 I-.731 J1.51 E.07111 G1 X12.491 Y55.358 E.02846 G3 X10.525 Y54.984 I-.731 J-1.51 E.07111 G1 X9.87 Y54.43 E.02846 G2 X7.905 Y54.804 I-.731 J1.51 E.07111 G1 X7.25 Y55.358 E.02846 G3 X5.284 Y54.984 I-.731 J-1.51 E.07111 G1 X4.629 Y54.43 E.02846 G2 X2.663 Y54.804 I-.731 J1.51 E.07111 G1 X2.008 Y55.358 E.02846 G3 X.043 Y54.984 I-.731 J-1.51 E.07111 G1 X-.612 Y54.43 E.02846 G2 X-2.578 Y54.804 I-.731 J1.51 E.07111 G1 X-3.233 Y55.358 E.02846 G3 X-5.198 Y54.984 I-.731 J-1.51 E.07111 G1 X-5.854 Y54.43 E.02846 G2 X-7.819 Y54.804 I-.731 J1.51 E.07111 G1 X-8.474 Y55.358 E.02846 G3 X-10.44 Y54.984 I-.731 J-1.51 E.07111 G1 X-11.095 Y54.43 E.02846 G2 X-13.06 Y54.804 I-.731 J1.51 E.07111 G1 X-13.716 Y55.358 E.02846 G3 X-15.681 Y54.984 I-.731 J-1.51 E.07111 G1 X-16.336 Y54.43 E.02846 G2 X-18.302 Y54.804 I-.731 J1.51 E.07111 G1 X-18.957 Y55.358 E.02846 G3 X-20.922 Y54.984 I-.731 J-1.51 E.07111 G1 X-21.578 Y54.43 E.02846 G2 X-23.543 Y54.804 I-.731 J1.51 E.07111 G1 X-24.198 Y55.358 E.02846 G3 X-26.164 Y54.984 I-.731 J-1.51 E.07111 G1 X-26.819 Y54.43 E.02846 G2 X-28.784 Y54.804 I-.731 J1.51 E.07111 G1 X-29.44 Y55.358 E.02846 G3 X-31.405 Y54.984 I-.731 J-1.51 E.07111 G1 X-32.06 Y54.43 E.02846 G2 X-34.026 Y54.804 I-.731 J1.51 E.07111 G1 X-34.681 Y55.358 E.02846 G3 X-36.646 Y54.984 I-.731 J-1.51 E.07111 G1 X-37.301 Y54.43 E.02846 G2 X-39.267 Y54.804 I-.731 J1.51 E.07111 G1 X-39.922 Y55.358 E.02846 G3 X-41.888 Y54.984 I-.731 J-1.51 E.07111 G1 X-42.543 Y54.43 E.02846 G2 X-44.508 Y54.804 I-.731 J1.51 E.07111 G1 X-45.163 Y55.358 E.02846 G3 X-47.129 Y54.984 I-.731 J-1.51 E.07111 G1 X-47.784 Y54.43 E.02846 G1 X-48.537 Y54.25 E.02568 G1 X-48.537 Y52.621 E.05401 G1 X-48.3 Y52.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y37.744 E.57795 G1 X-43.191 Y37.737 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y37.737 E.02169 G1 X-42.537 Y38.711 E.03232 G1 X-41.888 Y39.26 E.0282 G2 X-39.922 Y39.634 I1.234 J-1.136 E.07111 G1 X-39.267 Y39.08 E.02846 G3 X-37.301 Y38.706 I1.234 J1.136 E.07111 G1 X-36.646 Y39.26 E.02846 G2 X-34.681 Y39.634 I1.234 J-1.136 E.07111 G1 X-34.026 Y39.08 E.02846 G3 X-32.06 Y38.706 I1.234 J1.136 E.07111 G1 X-31.405 Y39.26 E.02846 G2 X-29.44 Y39.634 I1.234 J-1.136 E.07111 G1 X-28.784 Y39.08 E.02846 G3 X-26.819 Y38.706 I1.234 J1.136 E.07111 G2 X-25.563 Y39.698 I7.483 J-8.185 E.05312 G1 X-25.563 Y42.208 E.08328 G1 X-26.164 Y41.7 E.02609 G2 X-28.129 Y41.327 I-1.234 J1.136 E.07111 G1 X-28.784 Y41.881 E.02846 G3 X-30.75 Y42.254 I-1.234 J-1.136 E.07111 G1 X-31.405 Y41.7 E.02846 G2 X-33.37 Y41.327 I-1.234 J1.136 E.07111 G1 X-34.026 Y41.881 E.02846 G3 X-35.991 Y42.254 I-1.234 J-1.136 E.07111 G1 X-36.646 Y41.7 E.02846 G2 X-38.612 Y41.327 I-1.234 J1.136 E.07111 G1 X-39.267 Y41.881 E.02846 G3 X-41.232 Y42.254 I-1.234 J-1.136 E.07111 G2 X-42.537 Y41.227 I-7.753 J8.504 E.05512 G1 X-42.537 Y43.953 E.0904 G1 X-41.888 Y44.502 E.0282 G2 X-39.922 Y44.875 I1.234 J-1.136 E.07111 G1 X-39.267 Y44.321 E.02846 G3 X-37.301 Y43.948 I1.234 J1.136 E.07111 G1 X-36.646 Y44.502 E.02846 G2 X-34.681 Y44.875 I1.234 J-1.136 E.07111 G1 X-34.026 Y44.321 E.02846 G3 X-32.06 Y43.948 I1.234 J1.136 E.07111 G1 X-31.405 Y44.502 E.02846 G2 X-29.44 Y44.875 I1.234 J-1.136 E.07111 G1 X-28.784 Y44.321 E.02846 G3 X-26.819 Y43.948 I1.234 J1.136 E.07111 G2 X-25.563 Y44.939 I7.483 J-8.185 E.05312 G1 X-25.563 Y47.45 E.08328 G1 X-26.164 Y46.942 E.02609 G2 X-28.129 Y46.568 I-1.234 J1.136 E.07111 G1 X-28.784 Y47.122 E.02846 G3 X-30.75 Y47.496 I-1.234 J-1.136 E.07111 G1 X-31.405 Y46.942 E.02846 G2 X-33.37 Y46.568 I-1.234 J1.136 E.07111 G1 X-34.026 Y47.122 E.02846 G3 X-35.991 Y47.496 I-1.234 J-1.136 E.07111 G1 X-36.646 Y46.942 E.02846 G2 X-38.612 Y46.568 I-1.234 J1.136 E.07111 G1 X-39.267 Y47.122 E.02846 G3 X-41.232 Y47.496 I-1.234 J-1.136 E.07111 G2 X-42.537 Y46.469 I-7.753 J8.504 E.05512 G1 X-42.537 Y49.194 E.0904 G1 X-41.888 Y49.743 E.0282 G2 X-39.922 Y50.116 I1.234 J-1.136 E.07111 G1 X-39.267 Y49.562 E.02846 G3 X-37.301 Y49.189 I1.234 J1.136 E.07111 G1 X-36.646 Y49.743 E.02846 G2 X-34.681 Y50.116 I1.234 J-1.136 E.07111 G1 X-34.026 Y49.562 E.02846 G3 X-32.06 Y49.189 I1.234 J1.136 E.07111 G1 X-31.405 Y49.743 E.02846 G2 X-29.44 Y50.116 I1.234 J-1.136 E.07111 G1 X-28.784 Y49.562 E.02846 G3 X-26.819 Y49.189 I1.234 J1.136 E.07111 G1 X-26.164 Y49.743 E.02846 G2 X-24.198 Y50.116 I1.234 J-1.136 E.07111 G1 X-23.543 Y49.562 E.02846 G3 X-21.578 Y49.189 I1.234 J1.136 E.07111 G1 X-20.922 Y49.743 E.02846 G2 X-18.957 Y50.116 I1.234 J-1.136 E.07111 G1 X-18.302 Y49.562 E.02846 G3 X-16.336 Y49.189 I1.234 J1.136 E.07111 G1 X-15.681 Y49.743 E.02846 G2 X-13.716 Y50.116 I1.234 J-1.136 E.07111 G1 X-13.06 Y49.562 E.02846 G3 X-11.095 Y49.189 I1.234 J1.136 E.07111 G1 X-10.44 Y49.743 E.02846 G2 X-8.474 Y50.116 I1.234 J-1.136 E.07111 G1 X-7.819 Y49.562 E.02846 G3 X-5.854 Y49.189 I1.234 J1.136 E.07111 G1 X-5.198 Y49.743 E.02846 G2 X-3.233 Y50.116 I1.234 J-1.136 E.07111 G1 X-2.578 Y49.562 E.02846 G3 X-.612 Y49.189 I1.234 J1.136 E.07111 G1 X.043 Y49.743 E.02846 G2 X2.008 Y50.116 I1.234 J-1.136 E.07111 G1 X2.663 Y49.562 E.02846 G3 X4.629 Y49.189 I1.234 J1.136 E.07111 G1 X5.284 Y49.743 E.02846 G2 X7.25 Y50.116 I1.234 J-1.136 E.07111 G1 X7.905 Y49.562 E.02846 G3 X9.87 Y49.189 I1.234 J1.136 E.07111 G1 X10.525 Y49.743 E.02846 M73 P25 R59 G2 X12.491 Y50.116 I1.234 J-1.136 E.07111 G1 X13.146 Y49.562 E.02846 G3 X15.112 Y49.189 I1.234 J1.136 E.07111 G1 X15.767 Y49.743 E.02846 G2 X17.732 Y50.116 I1.234 J-1.136 E.07111 G1 X18.387 Y49.562 E.02846 G3 X20.353 Y49.189 I1.234 J1.136 E.07111 G2 X21.663 Y50.22 I7.786 J-8.543 E.05536 G1 X21.937 Y50.258 E.00916 G1 X21.937 Y47.577 E.08894 G1 X21.663 Y47.496 E.00947 G1 X21.008 Y46.942 E.02846 G2 X19.043 Y46.568 I-1.234 J1.136 E.07111 G1 X18.387 Y47.122 E.02846 G3 X16.422 Y47.496 I-1.234 J-1.136 E.07111 G1 X15.767 Y46.942 E.02846 G2 X13.801 Y46.568 I-1.234 J1.136 E.07111 G1 X13.146 Y47.122 E.02846 G3 X11.181 Y47.496 I-1.234 J-1.136 E.07111 G1 X10.525 Y46.942 E.02846 G2 X8.56 Y46.568 I-1.234 J1.136 E.07111 G1 X7.905 Y47.122 E.02846 G3 X5.939 Y47.496 I-1.234 J-1.136 E.07111 G2 X4.963 Y46.708 I-5.935 J6.355 E.04165 G1 X4.963 Y44.23 E.08219 G1 X5.284 Y44.502 E.01394 G2 X7.25 Y44.875 I1.234 J-1.136 E.07111 G1 X7.905 Y44.321 E.02846 G3 X9.87 Y43.948 I1.234 J1.136 E.07111 G1 X10.525 Y44.502 E.02846 G2 X12.491 Y44.875 I1.234 J-1.136 E.07111 G1 X13.146 Y44.321 E.02846 G3 X15.112 Y43.948 I1.234 J1.136 E.07111 G1 X15.767 Y44.502 E.02846 G2 X17.732 Y44.875 I1.234 J-1.136 E.07111 G1 X18.387 Y44.321 E.02846 G3 X20.353 Y43.948 I1.234 J1.136 E.07111 G2 X21.663 Y44.979 I7.785 J-8.543 E.05536 G1 X21.937 Y45.017 E.00916 G1 X21.937 Y42.335 E.08894 G1 X21.663 Y42.254 E.00947 G1 X21.008 Y41.7 E.02846 G2 X19.043 Y41.327 I-1.234 J1.136 E.07111 G1 X18.387 Y41.881 E.02846 G3 X16.422 Y42.254 I-1.234 J-1.136 E.07111 G1 X15.767 Y41.7 E.02846 G2 X13.801 Y41.327 I-1.234 J1.136 E.07111 G1 X13.146 Y41.881 E.02846 G3 X11.181 Y42.254 I-1.234 J-1.136 E.07111 G1 X10.525 Y41.7 E.02846 G2 X8.56 Y41.327 I-1.234 J1.136 E.07111 G1 X7.905 Y41.881 E.02846 G3 X5.939 Y42.254 I-1.234 J-1.136 E.07111 G2 X4.963 Y41.467 I-5.935 J6.355 E.04165 G1 X4.963 Y38.989 E.08219 G1 X5.284 Y39.26 E.01394 G2 X7.25 Y39.634 I1.234 J-1.136 E.07111 G1 X7.905 Y39.08 E.02846 G3 X9.87 Y38.706 I1.234 J1.136 E.07111 G1 X10.525 Y39.26 E.02846 G2 X12.491 Y39.634 I1.234 J-1.136 E.07111 G1 X13.146 Y39.08 E.02846 G3 X15.112 Y38.706 I1.234 J1.136 E.07111 G1 X15.767 Y39.26 E.02846 G2 X17.732 Y39.634 I1.234 J-1.136 E.07111 G1 X18.387 Y39.08 E.02846 G3 X20.353 Y38.706 I1.234 J1.136 E.07111 G2 X21.663 Y39.738 I7.785 J-8.543 E.05536 G1 X21.937 Y39.775 E.00916 G1 X21.937 Y38.147 E.05401 G1 X27.7 Y37.744 F30000 M73 P26 R59 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X25.265 Y56.559 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X26.315 Y57.377 I-1.614 J3.154 E.0444 G2 X27.56 Y58.172 I1.479 J-.944 E.05057 G1 X27.937 Y58.12 E.01263 G1 X27.925 Y59.737 E.05362 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X27.937 Y58.12 G1 X27.56 Y58.172 G1 X27.557 Y58.171 ;WIPE_END G1 X22.577 Y52.388 Z1.8 F30000 G1 X-42.652 Y-23.367 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:1.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2 I-.257 J1.189 P1 F30000 G1 X49.441 Y-1.646 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.486 Y-1.655 E.0015 G1 X50 Y-1.758 E.0174 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.402 Y-1.639 E.00252 G1 X49.526 Y-1.22 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.57 Y-1.229 E.00139 G1 X50 Y-1.314 E.01346 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01575 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.488 Y-1.208 E.01543 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.57 Y-1.229 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.18 Y-.553 ;WIPE_END G1 X50.42 Y-2.111 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.476 Y-2.542 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.5 Y-2.54 E.00075 G1 X50.991 Y-2.392 E.01574 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.436 Y-2.546 E.01347 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.5 Y-2.54 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.09 Y-1.515 ;WIPE_END G1 X44.499 Y-.723 Z2 F30000 G1 X28.14 Y.984 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.015 Y1.213 E.00802 G3 X26.2 Y2.185 I-1.818 J-1.213 E.06589 G3 X25.986 Y-2.175 I.003 J-2.185 E.2042 G3 X28.217 Y.835 I.212 J2.175 E.13832 G1 X28.158 Y.948 E.0039 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.015 Y1.213 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.64 Y2.139 ;WIPE_END G1 X19.188 Y.489 Z2 F30000 G1 X7.71 Y-2.052 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X10.783 Y3.203 I1.146 J2.121 E.07695 G3 X8.552 Y7.565 I-1.084 J2.197 E.25764 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.27 J2.028 E.24847 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.561 Y4.262 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.561 Y4.261 E.00002 G3 X9.283 Y3.844 I1.138 J1.137 E.02591 G1 X9.49 Y3.803 E.00647 G3 X8.423 Y4.42 I.21 J1.595 E.27173 G1 X8.535 Y4.292 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.561 Y4.261 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.49 Y3.803 G1 X9.7 Y3.79 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.372 Y3.944 ;WIPE_END G1 X3.164 Y6.453 Z2 F30000 G1 X-16.248 Y13.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.513 Y7.719 I-.767 J-1.293 E.01305 G3 X-29.152 Y3.235 I-.787 J-2.32 E.32145 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.27 J-2.028 E.24847 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.462 Y8.976 Z2 F30000 G1 X-29.16 Y6.537 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.163 Y6.537 E.00009 G3 X-30.717 Y3.844 I-1.137 J-1.138 E.1812 G1 X-30.51 Y3.803 E.00647 G3 X-29.024 Y6.379 I.21 J1.595 E.11652 G1 X-29.134 Y6.507 E.00518 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.163 Y6.537 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.972 Y6.86 ;WIPE_END G1 X-33.01 Y-.495 Z2 F30000 G1 X-38.949 Y-21.929 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.939 Y-21.995 E.00223 G3 X-38.23 Y-23.218 I2.631 J.709 E.04743 G3 X-36.533 Y-24.002 I1.912 J1.909 E.06332 G3 X-39.009 Y-21.645 I.225 J2.716 E.44541 G1 X-38.958 Y-21.89 E.0083 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.55 Y-21.849 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.546 Y-21.89 E.00135 G3 X-37.713 Y-23.13 I2.239 J.604 E.05045 G3 X-36.506 Y-23.596 I1.43 J1.906 E.04347 G3 X-38.606 Y-21.592 I.199 J2.31 E.37927 G1 X-38.559 Y-21.81 E.00742 G1 X-38.124 Y-21.764 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.125 Y-21.777 E.0004 G3 X-37.243 Y-22.921 I1.818 J.49 E.04556 G3 X-36.478 Y-23.162 I.921 J1.588 E.02485 G3 X-38.174 Y-21.535 I.17 J1.875 E.28549 G1 X-38.132 Y-21.725 E.006 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.125 Y-21.777 G1 X-38.042 Y-22.01 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-36.812 Y-23.101 ;WIPE_END G1 X-35.309 Y-30.584 Z2 F30000 G1 X-33.761 Y-38.296 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.783 Y-38.245 E.00184 G3 X-37.006 Y-41.924 I-2.518 J-1.046 E.36691 G1 X-36.656 Y-41.994 E.01184 G3 X-33.668 Y-38.583 I.356 J2.703 E.17766 G1 X-33.748 Y-38.334 E.00866 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.146 Y-38.427 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.159 Y-38.401 E.00096 G3 X-36.901 Y-41.53 I-2.142 J-.889 E.31207 G1 X-36.603 Y-41.59 E.01007 G3 X-34.061 Y-38.688 I.302 J2.299 E.1511 G1 X-34.134 Y-38.465 E.00778 G1 X-34.558 Y-38.567 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.561 Y-38.568 E.0001 G3 X-36.788 Y-41.109 I-1.739 J-.722 E.23479 G1 X-36.546 Y-41.157 E.00758 G3 X-34.482 Y-38.801 I.246 J1.867 E.11368 G1 X-34.546 Y-38.605 E.00633 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.561 Y-38.568 G1 X-34.667 Y-38.345 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.041 Y-37.421 ;WIPE_END G1 X-28.572 Y-38.992 Z2 F30000 G1 X-20.278 Y-40.737 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.247 Y-40.782 E.00182 G3 X-19.239 Y-41.556 I1.947 J1.494 E.04263 G1 X-19.087 Y-41.607 E.00532 G3 X-18.62 Y-41.721 I.667 J1.716 E.01599 G3 X-20.425 Y-40.515 I.32 J2.433 E.43691 G1 X-20.3 Y-40.703 E.0075 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.51 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.923 Y-40.534 E.00093 G3 X-19.083 Y-41.179 I1.623 J1.246 E.03554 G1 X-18.956 Y-41.222 E.00444 G3 X-18.567 Y-41.317 I.556 J1.431 E.01333 G3 X-20.072 Y-40.311 I.267 J2.029 E.36429 G1 X-19.961 Y-40.477 E.00662 G1 X-19.578 Y-40.268 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-18.916 Y-40.776 I1.278 J.98 E.02591 G1 X-18.817 Y-40.81 E.00324 G3 X-18.51 Y-40.885 I.438 J1.126 E.00972 G3 X-19.602 Y-40.236 I.21 J1.597 E.27081 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.817 Y-40.81 G1 X-18.51 Y-40.885 G1 X-18.3 Y-40.899 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.822 Y-40.823 ;WIPE_END G1 X-17.072 Y-33.227 Z2 F30000 G1 X-15.967 Y-22.036 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.941 Y-21.92 E.00393 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35158 G3 X-18.46 Y-23.732 I1.505 J2.003 E.04788 G3 X-16.044 Y-22.223 I.152 J2.447 E.10085 G1 X-15.982 Y-22.073 E.00537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.353 Y-21.905 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.333 Y-21.815 E.00305 G3 X-19.546 Y-22.912 I-1.974 J.529 E.29314 G3 X-18.434 Y-23.326 I1.255 J1.67 E.03992 G3 X-16.419 Y-22.067 I.126 J2.04 E.08409 G1 X-16.368 Y-21.942 E.00449 G1 X-16.765 Y-21.765 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.754 Y-21.702 E.00195 G3 X-19.105 Y-22.683 I-1.554 J.416 E.22019 G3 X-18.405 Y-22.892 I.785 J1.354 E.02266 G3 X-16.821 Y-21.901 I.098 J1.606 E.06126 G1 X-16.78 Y-21.802 E.00328 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.754 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.32 Y-20.01 G1 X-17.321 Y-20.01 ;WIPE_END G1 X-20.715 Y-13.173 Z2 F30000 G1 X-42.748 Y31.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z2 F30000 G1 X-42.748 Y51.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z2 F30000 G1 X4.752 Y47.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z2 F30000 G1 X4.752 Y33.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z2 F30000 G1 X27.252 Y31.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z2 F30000 G1 X-28.09 Y-52.948 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45573 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.946 E.32013 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32013 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45573 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z2 F30000 G1 X7.055 Y-53.79 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z2 F30000 G1 X-40.155 Y-5.355 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.186 J1.445 E.44457 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.447 J1.447 E.19549 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.447 J1.447 E.19549 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.186 J-1.445 E.44457 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.297 Y-2.773 Z2 F30000 G1 X-48.78 Y-.908 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.615 Y-1.213 E.01065 G3 X-47.014 Y-2.175 I1.818 J1.213 E.0593 G3 X-46.8 Y2.185 I.212 J2.175 E.21737 G3 X-48.817 Y-.835 I.003 J-2.185 E.13173 G1 X-48.798 Y-.872 E.00127 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.615 Y-1.213 G1 X-48.345 Y-1.545 G1 X-48.014 Y-1.817 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.323 Y-2.113 ;WIPE_END G1 X-47.183 Y5.518 Z2 F30000 G1 X-46.194 Y59.806 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.192 Y59.804 E.0001 G3 X-45.01 Y57.403 I1.396 J-.804 E.09701 G3 X-44.8 Y60.61 I.207 J1.597 E.16172 G3 X-46.075 Y59.979 I.004 J-1.611 E.0453 G1 X-46.171 Y59.839 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.192 Y59.804 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.036 Y57.972 ;WIPE_END G1 X-38.406 Y58.176 Z2 F30000 G1 X22.806 Y59.806 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.808 Y59.804 E.0001 G3 X23.99 Y57.403 I1.396 J-.804 E.09701 G3 X24.2 Y60.61 I.207 J1.597 E.16172 G3 X22.925 Y59.979 I.004 J-1.611 E.0453 G1 X22.829 Y59.839 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.808 Y59.804 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.964 Y57.972 ;WIPE_END G1 X17.576 Y52.567 Z2 F30000 G1 X-40.59 Y-5.79 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-46.144 Y-3.171 Z2 F30000 G1 Z1.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-47.784 Y-3.126 I-.681 J5.092 E.05465 G1 X-48.537 Y-3.446 E.02712 G1 X-48.537 Y-4.737 E.04284 G1 X-45.895 Y-4.737 E.08764 G1 X-45.163 Y-4.671 E.02436 G1 X-44.991 Y-4.737 E.00611 G1 X-40.653 Y-4.737 E.14389 G1 X-39.922 Y-4.671 E.02436 G3 X-39.537 Y-4.737 I.279 J.474 E.01325 G1 X-39.537 Y-4.845 E.00357 G2 X-38.612 Y-5.747 I-4.043 J-5.069 E.04294 G3 X-36.974 Y-5.966 I1.024 J1.426 E.05707 G3 X-35.991 Y-5.015 I-4.256 J5.381 E.04544 G2 X-34.353 Y-4.796 I1.024 J-1.426 E.05707 G2 X-33.37 Y-5.747 I-4.256 J-5.381 E.04544 G3 X-31.733 Y-5.966 I1.024 J1.426 E.05707 G3 X-30.75 Y-5.015 I-4.257 J5.381 E.04544 G2 X-29.112 Y-4.796 I1.024 J-1.426 E.05707 G2 X-28.129 Y-5.747 I-4.256 J-5.381 E.04544 G3 X-26.491 Y-5.966 I1.024 J1.426 E.05707 G3 X-25.509 Y-5.015 I-4.257 J5.381 E.04544 G2 X-23.871 Y-4.796 I1.024 J-1.426 E.05707 G2 X-22.888 Y-5.747 I-4.256 J-5.381 E.04544 G3 X-21.25 Y-5.966 I1.024 J1.426 E.05707 G3 X-20.267 Y-5.015 I-4.257 J5.381 E.04544 G2 X-18.629 Y-4.796 I1.024 J-1.426 E.05707 G2 X-17.647 Y-5.747 I-4.256 J-5.381 E.04544 G3 X-16.009 Y-5.966 I1.024 J1.426 E.05707 G3 X-15.026 Y-5.015 I-4.256 J5.381 E.04544 G2 X-13.388 Y-4.796 I1.024 J-1.426 E.05707 G2 X-12.405 Y-5.747 I-4.256 J-5.381 E.04544 G3 X-10.767 Y-5.966 I1.024 J1.426 E.05707 G3 X-9.785 Y-5.015 I-4.256 J5.381 E.04544 G2 X-8.147 Y-4.796 I1.024 J-1.426 E.05707 G2 X-7.164 Y-5.747 I-4.256 J-5.381 E.04544 G3 X-5.526 Y-5.966 I1.024 J1.426 E.05707 G3 X-4.543 Y-5.015 I-4.256 J5.381 E.04544 G2 X-2.905 Y-4.796 I1.024 J-1.426 E.05707 G2 X-1.923 Y-5.747 I-4.256 J-5.381 E.04544 G3 X-.285 Y-5.966 I1.024 J1.426 E.05707 G3 X.698 Y-5.015 I-4.257 J5.381 E.04544 G2 X2.336 Y-4.796 I1.024 J-1.426 E.05707 G2 X3.319 Y-5.747 I-4.256 J-5.381 E.04544 G3 X4.957 Y-5.966 I1.024 J1.426 E.05707 G3 X5.939 Y-5.015 I-4.257 J5.381 E.04544 G2 X7.577 Y-4.796 I1.024 J-1.426 E.05707 G2 X8.56 Y-5.747 I-4.256 J-5.381 E.04544 G3 X10.198 Y-5.966 I1.024 J1.426 E.05707 G3 X11.181 Y-5.015 I-4.257 J5.381 E.04544 G2 X12.819 Y-4.796 I1.024 J-1.426 E.05707 G2 X13.801 Y-5.747 I-4.256 J-5.381 E.04544 G3 X15.439 Y-5.966 I1.024 J1.426 E.05707 G3 X16.422 Y-5.015 I-4.256 J5.381 E.04544 G2 X18.06 Y-4.796 I1.024 J-1.426 E.05707 G2 X18.937 Y-5.638 I-3.766 J-4.799 E.0404 G1 X18.937 Y-8.671 E.10061 G2 X18.387 Y-8.311 I.24 J.965 E.02222 G1 X17.732 Y-7.636 E.0312 G3 X16.094 Y-7.417 I-1.024 J-1.426 E.05707 G3 X15.112 Y-8.368 I4.257 J-5.381 E.04544 G2 X13.474 Y-8.587 I-1.024 J1.426 E.05707 G2 X12.491 Y-7.636 I4.256 J5.381 E.04544 G3 X10.853 Y-7.417 I-1.024 J-1.426 E.05707 G3 X9.87 Y-8.368 I4.256 J-5.381 E.04544 G2 X8.232 Y-8.587 I-1.024 J1.426 E.05707 G2 X7.25 Y-7.636 I4.256 J5.381 E.04544 G3 X5.612 Y-7.417 I-1.024 J-1.426 E.05707 G3 X4.629 Y-8.368 I4.256 J-5.381 E.04544 G2 X2.991 Y-8.587 I-1.024 J1.426 E.05707 G2 X2.008 Y-7.636 I4.256 J5.381 E.04544 G3 X.37 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-.612 Y-8.368 I4.256 J-5.381 E.04544 G2 X-2.25 Y-8.587 I-1.024 J1.426 E.05707 G2 X-3.233 Y-7.636 I4.256 J5.381 E.04544 G3 X-4.871 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-5.854 Y-8.368 I4.257 J-5.381 E.04544 G2 X-7.492 Y-8.587 I-1.024 J1.426 E.05707 G2 X-8.474 Y-7.636 I4.256 J5.381 E.04544 G3 X-10.112 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-11.095 Y-8.368 I4.257 J-5.381 E.04544 G2 X-12.733 Y-8.587 I-1.024 J1.426 E.05707 G2 X-13.716 Y-7.636 I4.256 J5.381 E.04544 G3 X-15.354 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-16.336 Y-8.368 I4.257 J-5.381 E.04544 G2 X-17.974 Y-8.587 I-1.024 J1.426 E.05707 G2 X-18.957 Y-7.636 I4.256 J5.381 E.04544 G3 X-20.595 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-21.578 Y-8.368 I4.256 J-5.381 E.04544 G2 X-23.215 Y-8.587 I-1.024 J1.426 E.05707 G2 X-24.198 Y-7.636 I4.256 J5.381 E.04544 G3 X-25.836 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-26.819 Y-8.368 I4.256 J-5.381 E.04544 G2 X-28.457 Y-8.587 I-1.024 J1.426 E.05707 G2 X-29.44 Y-7.636 I4.256 J5.381 E.04544 G3 X-31.077 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-32.06 Y-8.368 I4.256 J-5.381 E.04544 G2 X-33.698 Y-8.587 I-1.024 J1.426 E.05707 G2 X-34.681 Y-7.636 I4.256 J5.381 E.04544 G3 X-36.319 Y-7.417 I-1.024 J-1.426 E.05707 G3 X-37.301 Y-8.368 I4.257 J-5.381 E.04544 G2 X-38.939 Y-8.587 I-1.024 J1.426 E.05707 G2 X-39.537 Y-8.033 I2.468 J3.26 E.02708 G1 X-39.537 Y-10.086 E.06811 G2 X-38.612 Y-10.988 I-4.043 J-5.069 E.04294 G3 X-36.974 Y-11.207 I1.024 J1.426 E.05707 G3 X-35.991 Y-10.256 I-4.256 J5.381 E.04544 G2 X-34.353 Y-10.037 I1.024 J-1.426 E.05707 G2 X-33.37 Y-10.988 I-4.256 J-5.381 E.04544 G3 X-31.733 Y-11.207 I1.024 J1.426 E.05707 G3 X-30.75 Y-10.256 I-4.256 J5.381 E.04544 G2 X-29.112 Y-10.037 I1.024 J-1.426 E.05707 G2 X-28.129 Y-10.988 I-4.256 J-5.381 E.04544 G3 X-26.491 Y-11.207 I1.024 J1.426 E.05707 G3 X-25.509 Y-10.256 I-4.256 J5.381 E.04544 G2 X-23.871 Y-10.037 I1.024 J-1.426 E.05707 G2 X-22.888 Y-10.988 I-4.256 J-5.381 E.04544 G3 X-21.25 Y-11.207 I1.024 J1.426 E.05707 G3 X-20.267 Y-10.256 I-4.256 J5.381 E.04544 G2 X-18.629 Y-10.037 I1.024 J-1.426 E.05707 G2 X-17.647 Y-10.988 I-4.256 J-5.381 E.04544 G3 X-16.009 Y-11.207 I1.024 J1.426 E.05707 G3 X-15.026 Y-10.256 I-4.256 J5.381 E.04544 G2 X-13.388 Y-10.037 I1.024 J-1.426 E.05707 G2 X-12.405 Y-10.988 I-4.256 J-5.381 E.04544 G3 X-10.767 Y-11.207 I1.024 J1.426 E.05707 G3 X-9.785 Y-10.256 I-4.256 J5.381 E.04544 G2 X-8.147 Y-10.037 I1.024 J-1.426 E.05707 G2 X-7.164 Y-10.988 I-4.256 J-5.381 E.04544 G3 X-5.526 Y-11.207 I1.024 J1.426 E.05707 G3 X-4.543 Y-10.256 I-4.256 J5.381 E.04544 G2 X-2.905 Y-10.037 I1.024 J-1.426 E.05707 G2 X-1.923 Y-10.988 I-4.256 J-5.381 E.04544 G3 X-.285 Y-11.207 I1.024 J1.426 E.05707 G3 X.698 Y-10.256 I-4.256 J5.381 E.04544 G2 X2.336 Y-10.037 I1.024 J-1.426 E.05707 G2 X3.319 Y-10.988 I-4.256 J-5.381 E.04544 G3 X4.957 Y-11.207 I1.024 J1.426 E.05707 G3 X5.939 Y-10.256 I-4.256 J5.381 E.04544 G2 X7.577 Y-10.037 I1.024 J-1.426 E.05707 G2 X8.56 Y-10.988 I-4.256 J-5.381 E.04544 G3 X10.198 Y-11.207 I1.024 J1.426 E.05707 G3 X11.181 Y-10.256 I-4.256 J5.381 E.04544 G2 X12.819 Y-10.037 I1.024 J-1.426 E.05707 G2 X13.801 Y-10.988 I-4.256 J-5.381 E.04544 G3 X15.439 Y-11.207 I1.024 J1.426 E.05707 G3 X16.422 Y-10.256 I-4.256 J5.381 E.04544 G2 X18.06 Y-10.037 I1.024 J-1.426 E.05707 G2 X18.937 Y-10.88 I-3.766 J-4.799 E.0404 G1 X18.937 Y-13.913 E.10061 G2 X18.387 Y-13.552 I.24 J.965 E.02222 G1 X17.732 Y-12.877 E.0312 G3 X16.094 Y-12.658 I-1.024 J-1.426 E.05707 G3 X15.112 Y-13.609 I4.256 J-5.381 E.04544 G2 X13.474 Y-13.828 I-1.024 J1.426 E.05707 G2 X12.491 Y-12.877 I4.256 J5.381 E.04544 G3 X10.853 Y-12.658 I-1.024 J-1.426 E.05707 G3 X9.87 Y-13.609 I4.256 J-5.381 E.04544 G2 X8.232 Y-13.828 I-1.024 J1.426 E.05707 G2 X7.25 Y-12.877 I4.256 J5.381 E.04544 G3 X5.612 Y-12.658 I-1.024 J-1.426 E.05707 G3 X4.629 Y-13.609 I4.256 J-5.381 E.04544 G2 X2.991 Y-13.828 I-1.024 J1.426 E.05707 G2 X2.008 Y-12.877 I4.256 J5.381 E.04544 G3 X.37 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-.612 Y-13.609 I4.256 J-5.381 E.04544 G2 X-2.25 Y-13.828 I-1.024 J1.426 E.05707 G2 X-3.233 Y-12.877 I4.256 J5.381 E.04544 G3 X-4.871 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-5.854 Y-13.609 I4.256 J-5.381 E.04544 G2 X-7.492 Y-13.828 I-1.024 J1.426 E.05707 G2 X-8.474 Y-12.877 I4.256 J5.381 E.04544 G3 X-10.112 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-11.095 Y-13.609 I4.256 J-5.381 E.04544 G2 X-12.733 Y-13.828 I-1.024 J1.426 E.05707 G2 X-13.716 Y-12.877 I4.256 J5.381 E.04544 G3 X-15.354 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-16.336 Y-13.609 I4.256 J-5.381 E.04544 G2 X-17.974 Y-13.828 I-1.024 J1.426 E.05707 G2 X-18.957 Y-12.877 I4.256 J5.381 E.04544 G3 X-20.595 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-21.578 Y-13.609 I4.256 J-5.381 E.04544 G2 X-23.215 Y-13.828 I-1.024 J1.426 E.05707 G2 X-24.198 Y-12.877 I4.256 J5.381 E.04544 G3 X-25.836 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-26.819 Y-13.609 I4.256 J-5.381 E.04544 G2 X-28.457 Y-13.828 I-1.024 J1.426 E.05707 G2 X-29.44 Y-12.877 I4.256 J5.381 E.04544 G3 X-31.077 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-32.06 Y-13.609 I4.256 J-5.381 E.04544 G2 X-33.698 Y-13.828 I-1.024 J1.426 E.05707 G2 X-34.681 Y-12.877 I4.256 J5.381 E.04544 G3 X-36.319 Y-12.658 I-1.024 J-1.426 E.05707 G3 X-37.301 Y-13.609 I4.256 J-5.381 E.04544 G2 X-38.939 Y-13.828 I-1.024 J1.426 E.05707 G2 X-39.537 Y-13.274 I2.468 J3.26 E.02708 G1 X-39.537 Y-15.327 E.06811 G2 X-38.612 Y-16.23 I-4.043 J-5.069 E.04294 G3 X-36.974 Y-16.449 I1.024 J1.426 E.05707 G3 X-35.991 Y-15.498 I-4.256 J5.381 E.04544 G2 X-34.353 Y-15.279 I1.024 J-1.426 E.05707 G2 X-33.37 Y-16.23 I-4.256 J-5.381 E.04544 G3 X-31.733 Y-16.449 I1.024 J1.426 E.05707 G3 X-30.75 Y-15.498 I-4.256 J5.381 E.04544 G2 X-29.112 Y-15.279 I1.024 J-1.426 E.05707 G2 X-28.129 Y-16.23 I-4.256 J-5.381 E.04544 G3 X-26.491 Y-16.449 I1.024 J1.426 E.05707 G3 X-25.509 Y-15.498 I-4.256 J5.381 E.04544 G2 X-23.871 Y-15.279 I1.024 J-1.426 E.05707 G2 X-22.888 Y-16.23 I-4.256 J-5.381 E.04544 G3 X-21.25 Y-16.449 I1.024 J1.426 E.05707 G3 X-20.267 Y-15.498 I-4.256 J5.381 E.04544 G2 X-18.629 Y-15.279 I1.024 J-1.426 E.05707 G2 X-17.647 Y-16.23 I-4.256 J-5.381 E.04544 G3 X-16.009 Y-16.449 I1.024 J1.426 E.05707 G3 X-15.026 Y-15.498 I-4.256 J5.381 E.04544 G2 X-13.388 Y-15.279 I1.024 J-1.426 E.05707 G2 X-12.405 Y-16.23 I-4.256 J-5.381 E.04544 G3 X-10.767 Y-16.449 I1.024 J1.426 E.05707 G3 X-9.785 Y-15.498 I-4.256 J5.381 E.04544 G2 X-8.147 Y-15.279 I1.024 J-1.426 E.05707 G2 X-7.164 Y-16.23 I-4.256 J-5.381 E.04544 G3 X-5.526 Y-16.449 I1.024 J1.426 E.05707 G3 X-4.543 Y-15.498 I-4.256 J5.381 E.04544 G2 X-2.905 Y-15.279 I1.024 J-1.426 E.05707 G2 X-1.923 Y-16.23 I-4.256 J-5.381 E.04544 G3 X-.285 Y-16.449 I1.024 J1.426 E.05707 G3 X.698 Y-15.498 I-4.256 J5.381 E.04544 G2 X2.336 Y-15.279 I1.024 J-1.426 E.05707 G2 X3.319 Y-16.23 I-4.256 J-5.381 E.04544 G3 X4.957 Y-16.449 I1.024 J1.426 E.05707 G3 X5.939 Y-15.498 I-4.256 J5.381 E.04544 G2 X7.577 Y-15.279 I1.024 J-1.426 E.05707 G2 X8.56 Y-16.23 I-4.256 J-5.381 E.04544 G3 X10.198 Y-16.449 I1.024 J1.426 E.05707 G3 X11.181 Y-15.498 I-4.256 J5.381 E.04544 G2 X12.819 Y-15.279 I1.024 J-1.426 E.05707 G2 X13.801 Y-16.23 I-4.256 J-5.381 E.04544 G3 X15.439 Y-16.449 I1.024 J1.426 E.05707 G3 X16.422 Y-15.498 I-4.256 J5.381 E.04544 G2 X18.06 Y-15.279 I1.024 J-1.426 E.05707 G2 X18.937 Y-16.121 I-3.766 J-4.799 E.0404 G1 X18.937 Y-17.749 E.05401 G1 X18.937 Y-28.008 F30000 G1 F16200 G1 X18.937 Y-29.636 E.05401 G2 X18.387 Y-29.276 I.24 J.965 E.02222 G1 X17.732 Y-28.601 E.0312 G3 X16.094 Y-28.382 I-1.024 J-1.426 E.05707 G3 X15.112 Y-29.333 I4.256 J-5.381 E.04544 G2 X13.474 Y-29.552 I-1.024 J1.426 E.05707 G2 X12.491 Y-28.601 I4.256 J5.381 E.04544 G3 X10.853 Y-28.382 I-1.024 J-1.426 E.05707 G3 X9.87 Y-29.333 I4.256 J-5.381 E.04544 G2 X8.232 Y-29.552 I-1.024 J1.426 E.05707 G2 X7.25 Y-28.601 I4.256 J5.381 E.04544 G3 X5.612 Y-28.382 I-1.024 J-1.426 E.05707 G3 X4.629 Y-29.333 I4.256 J-5.381 E.04544 G2 X2.991 Y-29.552 I-1.024 J1.426 E.05707 G2 X2.008 Y-28.601 I4.256 J5.381 E.04544 G3 X.37 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-.612 Y-29.333 I4.256 J-5.381 E.04544 G2 X-2.25 Y-29.552 I-1.024 J1.426 E.05707 G2 X-3.233 Y-28.601 I4.256 J5.381 E.04544 G3 X-4.871 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-5.854 Y-29.333 I4.256 J-5.381 E.04544 G2 X-7.492 Y-29.552 I-1.024 J1.426 E.05707 G2 X-8.474 Y-28.601 I4.256 J5.381 E.04544 G3 X-10.112 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-11.095 Y-29.333 I4.256 J-5.381 E.04544 G2 X-12.733 Y-29.552 I-1.024 J1.426 E.05707 G2 X-13.716 Y-28.601 I4.256 J5.381 E.04544 G3 X-15.354 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-16.336 Y-29.333 I4.256 J-5.381 E.04544 G2 X-17.974 Y-29.552 I-1.024 J1.426 E.05707 G2 X-18.957 Y-28.601 I4.256 J5.381 E.04544 G3 X-20.595 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-21.578 Y-29.333 I4.256 J-5.381 E.04544 G2 X-23.215 Y-29.552 I-1.024 J1.426 E.05707 G2 X-24.198 Y-28.601 I4.256 J5.381 E.04544 G3 X-25.836 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-26.819 Y-29.333 I4.256 J-5.381 E.04544 G2 X-28.457 Y-29.552 I-1.024 J1.426 E.05707 G2 X-29.44 Y-28.601 I4.256 J5.381 E.04544 G3 X-31.077 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-32.06 Y-29.333 I4.256 J-5.381 E.04544 G2 X-33.698 Y-29.552 I-1.024 J1.426 E.05707 G2 X-34.681 Y-28.601 I4.256 J5.381 E.04544 G3 X-36.319 Y-28.382 I-1.024 J-1.426 E.05707 G3 X-37.301 Y-29.333 I4.256 J-5.381 E.04544 G2 X-38.939 Y-29.552 I-1.024 J1.426 E.05707 G2 X-39.537 Y-28.998 I2.468 J3.26 E.02708 G1 X-39.537 Y-31.051 E.06811 G2 X-38.612 Y-31.954 I-4.043 J-5.069 E.04294 G3 X-36.974 Y-32.173 I1.024 J1.426 E.05707 G3 X-35.991 Y-31.222 I-4.256 J5.381 E.04544 G2 X-34.353 Y-31.003 I1.024 J-1.426 E.05707 G2 X-33.37 Y-31.954 I-4.256 J-5.381 E.04544 G3 X-31.733 Y-32.173 I1.024 J1.426 E.05707 G3 X-30.75 Y-31.222 I-4.256 J5.381 E.04544 G2 X-29.112 Y-31.003 I1.024 J-1.426 E.05707 G2 X-28.129 Y-31.954 I-4.256 J-5.381 E.04544 G3 X-26.491 Y-32.173 I1.024 J1.426 E.05707 G3 X-25.509 Y-31.222 I-4.256 J5.381 E.04544 G2 X-23.871 Y-31.003 I1.024 J-1.426 E.05707 G2 X-22.888 Y-31.954 I-4.256 J-5.381 E.04544 G3 X-21.25 Y-32.173 I1.024 J1.426 E.05707 G3 X-20.267 Y-31.222 I-4.256 J5.381 E.04544 G2 X-18.629 Y-31.003 I1.024 J-1.426 E.05707 G2 X-17.647 Y-31.954 I-4.256 J-5.381 E.04544 G3 X-16.009 Y-32.173 I1.024 J1.426 E.05707 G3 X-15.026 Y-31.222 I-4.256 J5.381 E.04544 G2 X-13.388 Y-31.003 I1.024 J-1.426 E.05707 G2 X-12.405 Y-31.954 I-4.256 J-5.381 E.04544 G3 X-10.767 Y-32.173 I1.024 J1.426 E.05707 G3 X-9.785 Y-31.222 I-4.256 J5.381 E.04544 G2 X-8.147 Y-31.003 I1.024 J-1.426 E.05707 G2 X-7.164 Y-31.954 I-4.256 J-5.381 E.04544 G3 X-5.526 Y-32.173 I1.024 J1.426 E.05707 G3 X-4.543 Y-31.222 I-4.256 J5.381 E.04544 G2 X-2.905 Y-31.003 I1.024 J-1.426 E.05707 G2 X-1.923 Y-31.954 I-4.256 J-5.381 E.04544 G3 X-.285 Y-32.173 I1.024 J1.426 E.05707 G3 X.698 Y-31.222 I-4.256 J5.381 E.04544 G2 X2.336 Y-31.003 I1.024 J-1.426 E.05707 G2 X3.319 Y-31.954 I-4.256 J-5.381 E.04544 G3 X4.957 Y-32.173 I1.024 J1.426 E.05707 G3 X5.939 Y-31.222 I-4.256 J5.381 E.04544 G2 X7.577 Y-31.003 I1.024 J-1.426 E.05707 G2 X8.56 Y-31.954 I-4.256 J-5.381 E.04544 G3 X10.198 Y-32.173 I1.024 J1.426 E.05707 G3 X11.181 Y-31.222 I-4.256 J5.381 E.04544 G2 X12.819 Y-31.003 I1.024 J-1.426 E.05707 G2 X13.801 Y-31.954 I-4.256 J-5.381 E.04544 G3 X15.439 Y-32.173 I1.024 J1.426 E.05707 G3 X16.422 Y-31.222 I-4.256 J5.381 E.04544 G2 X18.06 Y-31.003 I1.024 J-1.426 E.05707 G2 X18.937 Y-31.845 I-3.766 J-4.799 E.0404 G1 X18.937 Y-33.473 E.05401 G1 X18.937 Y-43.732 F30000 G1 F16200 G1 X18.937 Y-45.36 E.05401 G2 X17.732 Y-44.325 I1.718 J3.217 E.05312 G3 X16.422 Y-43.981 I-1.057 J-1.361 E.04618 G1 X16.094 Y-44.106 E.01163 G3 X15.112 Y-45.057 I4.256 J-5.381 E.04544 G2 X13.801 Y-45.401 I-1.057 J1.361 E.04618 G1 X13.474 Y-45.276 E.01163 G2 X12.491 Y-44.325 I4.256 J5.381 E.04544 G3 X11.181 Y-43.981 I-1.057 J-1.361 E.04618 G1 X10.853 Y-44.106 E.01163 G3 X9.87 Y-45.057 I4.256 J-5.381 E.04544 G2 X8.56 Y-45.401 I-1.057 J1.361 E.04618 G1 X8.232 Y-45.276 E.01163 G2 X7.25 Y-44.325 I4.256 J5.381 E.04544 G3 X5.939 Y-43.981 I-1.057 J-1.361 E.04618 G1 X5.612 Y-44.106 E.01163 G3 X4.629 Y-45.057 I4.256 J-5.381 E.04544 G2 X3.319 Y-45.401 I-1.057 J1.361 E.04618 G1 X2.991 Y-45.276 E.01163 G2 X2.008 Y-44.325 I4.256 J5.381 E.04544 G3 X.698 Y-43.981 I-1.057 J-1.361 E.04618 G1 X.37 Y-44.106 E.01163 G3 X-.612 Y-45.057 I4.256 J-5.381 E.04544 G2 X-1.923 Y-45.401 I-1.057 J1.361 E.04618 G1 X-2.25 Y-45.276 E.01163 G2 X-3.233 Y-44.325 I4.256 J5.381 E.04544 G3 X-4.543 Y-43.981 I-1.057 J-1.361 E.04618 G1 X-4.871 Y-44.106 E.01163 G3 X-5.854 Y-45.057 I4.256 J-5.381 E.04544 G2 X-7.164 Y-45.401 I-1.057 J1.361 E.04618 G1 X-7.492 Y-45.276 E.01163 G2 X-8.474 Y-44.325 I4.256 J5.381 E.04544 G3 X-9.785 Y-43.981 I-1.057 J-1.361 E.04618 G1 X-10.112 Y-44.106 E.01163 G3 X-11.095 Y-45.057 I4.256 J-5.381 E.04544 G2 X-12.405 Y-45.401 I-1.057 J1.361 E.04618 G1 X-12.733 Y-45.276 E.01163 G2 X-13.716 Y-44.325 I4.256 J5.381 E.04544 G3 X-15.026 Y-43.981 I-1.057 J-1.361 E.04618 G1 X-15.354 Y-44.106 E.01163 G3 X-16.336 Y-45.057 I4.256 J-5.381 E.04544 G2 X-17.647 Y-45.401 I-1.057 J1.361 E.04618 G1 X-17.974 Y-45.276 E.01163 G2 X-18.957 Y-44.325 I4.256 J5.381 E.04544 G3 X-20.267 Y-43.981 I-1.057 J-1.361 E.04618 G1 X-20.595 Y-44.106 E.01163 G3 X-21.578 Y-45.057 I4.256 J-5.381 E.04544 G2 X-22.888 Y-45.401 I-1.057 J1.361 E.04618 G1 X-23.215 Y-45.276 E.01163 G2 X-24.198 Y-44.325 I4.256 J5.381 E.04544 G3 X-25.509 Y-43.981 I-1.057 J-1.361 E.04618 G1 X-25.836 Y-44.106 E.01163 G3 X-26.819 Y-45.057 I4.256 J-5.381 E.04544 G2 X-28.129 Y-45.401 I-1.057 J1.361 E.04618 G1 X-28.457 Y-45.276 E.01163 G2 X-29.44 Y-44.325 I4.256 J5.381 E.04544 G3 X-30.75 Y-43.981 I-1.057 J-1.361 E.04618 G1 X-31.077 Y-44.106 E.01163 G3 X-32.06 Y-45.057 I4.256 J-5.381 E.04544 G2 X-33.37 Y-45.401 I-1.057 J1.361 E.04618 G1 X-33.698 Y-45.276 E.01163 G2 X-34.681 Y-44.325 I4.256 J5.381 E.04544 G3 X-35.991 Y-43.981 I-1.057 J-1.361 E.04618 G1 X-36.319 Y-44.106 E.01163 G3 X-37.301 Y-45.057 I4.256 J-5.381 E.04544 G2 X-38.612 Y-45.401 I-1.057 J1.361 E.04618 G2 X-39.537 Y-44.722 I.746 J1.986 E.03854 G1 X-39.537 Y-46.775 E.06811 G2 X-38.612 Y-47.678 I-4.043 J-5.069 E.04294 G3 X-37.301 Y-48.021 I1.057 J1.361 E.04618 G1 X-36.974 Y-47.897 E.01163 G3 X-35.991 Y-46.945 I-4.256 J5.381 E.04544 G2 X-34.681 Y-46.602 I1.057 J-1.361 E.04618 G1 X-34.353 Y-46.726 E.01163 G2 X-33.37 Y-47.678 I-4.256 J-5.381 E.04544 G3 X-32.06 Y-48.021 I1.057 J1.361 E.04618 G1 X-31.733 Y-47.897 E.01163 G3 X-30.75 Y-46.945 I-4.256 J5.381 E.04544 G2 X-29.44 Y-46.602 I1.057 J-1.361 E.04618 G1 X-29.112 Y-46.726 E.01163 G2 X-28.129 Y-47.678 I-4.256 J-5.381 E.04544 G3 X-26.819 Y-48.021 I1.057 J1.361 E.04618 G1 X-26.491 Y-47.897 E.01163 G3 X-25.509 Y-46.945 I-4.256 J5.381 E.04544 G2 X-24.198 Y-46.602 I1.057 J-1.361 E.04618 G1 X-23.871 Y-46.726 E.01163 G2 X-22.888 Y-47.678 I-4.256 J-5.381 E.04544 G3 X-21.578 Y-48.021 I1.057 J1.361 E.04618 G1 X-21.25 Y-47.897 E.01163 G3 X-20.267 Y-46.945 I-4.256 J5.381 E.04544 G2 X-18.957 Y-46.602 I1.057 J-1.361 E.04618 G1 X-18.629 Y-46.726 E.01163 G2 X-17.647 Y-47.678 I-4.256 J-5.381 E.04544 G3 X-16.336 Y-48.021 I1.057 J1.361 E.04618 G1 X-16.009 Y-47.897 E.01163 G3 X-15.026 Y-46.945 I-4.256 J5.381 E.04544 G2 X-13.716 Y-46.602 I1.057 J-1.361 E.04618 G1 X-13.388 Y-46.726 E.01163 G2 X-12.405 Y-47.678 I-4.256 J-5.381 E.04544 G3 X-11.095 Y-48.021 I1.057 J1.361 E.04618 G1 X-10.767 Y-47.897 E.01163 G3 X-9.785 Y-46.945 I-4.256 J5.381 E.04544 G2 X-8.474 Y-46.602 I1.057 J-1.361 E.04618 G1 X-8.147 Y-46.726 E.01163 G2 X-7.164 Y-47.678 I-4.256 J-5.381 E.04544 G3 X-5.854 Y-48.021 I1.057 J1.361 E.04618 G1 X-5.526 Y-47.897 E.01163 G3 X-4.543 Y-46.945 I-4.256 J5.381 E.04544 G2 X-3.233 Y-46.602 I1.057 J-1.361 E.04618 G1 X-2.905 Y-46.726 E.01163 G2 X-1.923 Y-47.678 I-4.256 J-5.381 E.04544 G3 X-.612 Y-48.021 I1.057 J1.361 E.04618 G1 X-.285 Y-47.897 E.01163 G3 X.698 Y-46.945 I-4.256 J5.381 E.04544 G2 X2.008 Y-46.602 I1.057 J-1.361 E.04618 G1 X2.336 Y-46.726 E.01163 G2 X3.319 Y-47.678 I-4.256 J-5.381 E.04544 G3 X4.629 Y-48.021 I1.057 J1.361 E.04618 G1 X4.957 Y-47.897 E.01163 G3 X5.939 Y-46.945 I-4.256 J5.381 E.04544 G2 X7.25 Y-46.602 I1.057 J-1.361 E.04618 G1 X7.577 Y-46.726 E.01163 G2 X8.56 Y-47.678 I-4.256 J-5.381 E.04544 G3 X9.87 Y-48.021 I1.057 J1.361 E.04618 G1 X10.198 Y-47.897 E.01163 G3 X11.181 Y-46.945 I-4.256 J5.381 E.04544 G2 X12.491 Y-46.602 I1.057 J-1.361 E.04618 G1 X12.819 Y-46.726 E.01163 G2 X13.801 Y-47.678 I-4.256 J-5.381 E.04544 G3 X15.112 Y-48.021 I1.057 J1.361 E.04618 G1 X15.439 Y-47.897 E.01163 G3 X16.422 Y-46.945 I-4.256 J5.381 E.04544 G2 X17.732 Y-46.602 I1.057 J-1.361 E.04618 G2 X18.937 Y-47.569 I-1.029 J-2.517 E.05196 G1 X18.937 Y-50.602 E.10061 G2 X17.732 Y-49.566 I1.718 J3.217 E.05312 G3 X16.422 Y-49.222 I-1.057 J-1.361 E.04618 G1 X16.094 Y-49.347 E.01163 G3 X15.112 Y-50.298 I4.256 J-5.381 E.04544 G2 X13.801 Y-50.642 I-1.057 J1.361 E.04618 G1 X13.474 Y-50.517 E.01163 G2 X12.491 Y-49.566 I4.256 J5.381 E.04544 G3 X11.181 Y-49.222 I-1.057 J-1.361 E.04618 G1 X10.853 Y-49.347 E.01163 G3 X9.87 Y-50.298 I4.256 J-5.381 E.04544 G2 X8.56 Y-50.642 I-1.057 J1.361 E.04618 G1 X8.232 Y-50.517 E.01163 G2 X7.25 Y-49.566 I4.257 J5.381 E.04544 G3 X5.939 Y-49.222 I-1.057 J-1.361 E.04618 G1 X5.612 Y-49.347 E.01163 G3 X4.629 Y-50.298 I4.256 J-5.381 E.04544 G2 X3.319 Y-50.642 I-1.057 J1.361 E.04618 G1 X2.991 Y-50.517 E.01163 G2 X2.008 Y-49.566 I4.257 J5.381 E.04544 G3 X.698 Y-49.222 I-1.057 J-1.361 E.04618 G1 X.37 Y-49.347 E.01163 G3 X-.612 Y-50.298 I4.256 J-5.381 E.04544 G2 X-1.923 Y-50.642 I-1.057 J1.361 E.04618 G1 X-2.25 Y-50.517 E.01163 G2 X-3.233 Y-49.566 I4.256 J5.381 E.04544 G3 X-4.543 Y-49.222 I-1.057 J-1.361 E.04618 G1 X-4.871 Y-49.347 E.01163 G3 X-5.854 Y-50.298 I4.256 J-5.381 E.04544 G2 X-7.164 Y-50.642 I-1.057 J1.361 E.04618 G1 X-7.492 Y-50.517 E.01163 G2 X-8.474 Y-49.566 I4.256 J5.381 E.04544 G3 X-9.785 Y-49.222 I-1.057 J-1.361 E.04618 G1 X-10.112 Y-49.347 E.01163 G3 X-11.095 Y-50.298 I4.256 J-5.381 E.04544 G2 X-12.405 Y-50.642 I-1.057 J1.361 E.04618 G1 X-12.733 Y-50.517 E.01163 G2 X-13.716 Y-49.566 I4.256 J5.381 E.04544 G3 X-15.026 Y-49.222 I-1.057 J-1.361 E.04618 G1 X-15.354 Y-49.347 E.01163 G3 X-16.336 Y-50.298 I4.256 J-5.381 E.04544 G2 X-17.647 Y-50.642 I-1.057 J1.361 E.04618 G1 X-17.974 Y-50.517 E.01163 G2 X-18.957 Y-49.566 I4.257 J5.381 E.04544 G3 X-20.267 Y-49.222 I-1.057 J-1.361 E.04618 G1 X-20.595 Y-49.347 E.01163 G3 X-21.578 Y-50.298 I4.256 J-5.381 E.04544 G2 X-22.888 Y-50.642 I-1.057 J1.361 E.04618 G1 X-23.215 Y-50.517 E.01163 G2 X-24.198 Y-49.566 I4.257 J5.381 E.04544 G3 X-25.509 Y-49.222 I-1.057 J-1.361 E.04618 G1 X-25.836 Y-49.347 E.01163 G3 X-26.819 Y-50.298 I4.256 J-5.381 E.04544 G2 X-28.129 Y-50.642 I-1.057 J1.361 E.04618 G1 X-28.457 Y-50.517 E.01163 G2 X-29.44 Y-49.566 I4.257 J5.381 E.04544 G3 X-30.75 Y-49.222 I-1.057 J-1.361 E.04618 M73 P27 R59 G1 X-31.077 Y-49.347 E.01163 G3 X-32.06 Y-50.298 I4.256 J-5.381 E.04544 G2 X-33.37 Y-50.642 I-1.057 J1.361 E.04618 G1 X-33.698 Y-50.517 E.01163 G2 X-34.681 Y-49.566 I4.256 J5.381 E.04544 G3 X-35.991 Y-49.222 I-1.057 J-1.361 E.04618 G1 X-36.319 Y-49.347 E.01163 G3 X-37.301 Y-50.298 I4.256 J-5.381 E.04544 G2 X-38.612 Y-50.642 I-1.057 J1.361 E.04618 G2 X-39.537 Y-49.963 I.746 J1.986 E.03854 G1 X-39.537 Y-48.335 E.05401 G1 X-39.537 Y-43.162 F30000 G1 F16200 G1 X-39.537 Y-41.534 E.05401 G2 X-38.612 Y-42.436 I-4.043 J-5.069 E.04294 G3 X-37.301 Y-42.78 I1.057 J1.361 E.04618 G3 X-36.488 Y-42.217 I-.649 J1.805 E.03318 G2 X-38.002 Y-41.68 I.192 J2.944 E.05394 G1 X-39.285 Y-40.405 F30000 ;TYPE:Gap infill ;WIDTH:0.475339 G1 F12000 G2 X-39.337 Y-40.088 I4.841 J.948 E.01132 ;WIDTH:0.439027 G1 X-39.356 Y-39.896 E.00622 ;WIDTH:0.399139 G2 X-39.376 Y-39.682 I3.264 J.418 E.00624 ;WIDTH:0.366947 G2 X-39.375 Y-38.872 I8.954 J.389 E.02139 ;WIDTH:0.401236 G1 X-39.356 Y-38.68 E.00563 ;WIDTH:0.441845 G2 X-39.333 Y-38.461 I3.347 J-.233 E.00717 ;WIDTH:0.465138 G1 X-39.285 Y-38.171 E.0101 G1 X-39.285 Y-22.405 F30000 ;WIDTH:0.475337 G1 F12000 G2 X-39.337 Y-22.088 I4.835 J.947 E.01132 ;WIDTH:0.439025 G1 X-39.356 Y-21.896 E.00622 ;WIDTH:0.399137 G2 X-39.376 Y-21.682 I3.262 J.418 E.00624 ;WIDTH:0.366946 G2 X-39.375 Y-20.872 I8.955 J.389 E.02139 ;WIDTH:0.401235 G1 X-39.356 Y-20.68 E.00563 ;WIDTH:0.441845 G2 X-39.333 Y-20.461 I3.343 J-.232 E.00717 ;WIDTH:0.465138 G1 X-39.285 Y-20.171 E.0101 G1 X-39.537 Y-16.887 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-39.537 Y-18.515 E.05401 G3 X-38.612 Y-19.194 I1.671 J1.308 E.03854 G3 X-38.09 Y-18.955 I.112 J.445 E.02056 G2 X-36.874 Y-18.41 I2.261 J-3.417 E.0444 G2 X-35.991 Y-17.775 I1.591 J-1.279 E.03654 G2 X-34.681 Y-18.118 I.253 J-1.705 E.04618 G3 X-33.698 Y-19.069 I5.239 J4.43 E.04544 G1 X-33.37 Y-19.194 E.01163 G3 X-32.06 Y-18.85 I.253 J1.705 E.04618 G2 X-31.077 Y-17.899 I5.239 J-4.43 E.04544 G1 X-30.75 Y-17.775 E.01163 G2 X-29.44 Y-18.118 I.253 J-1.705 E.04618 G3 X-28.457 Y-19.069 I5.239 J4.43 E.04544 G1 X-28.129 Y-19.194 E.01163 G3 X-26.819 Y-18.85 I.253 J1.705 E.04618 G2 X-25.836 Y-17.899 I5.239 J-4.43 E.04544 G1 X-25.509 Y-17.775 E.01163 G2 X-24.198 Y-18.118 I.253 J-1.705 E.04618 G3 X-23.215 Y-19.069 I5.239 J4.43 E.04544 G1 X-22.888 Y-19.194 E.01163 G3 X-21.578 Y-18.85 I.253 J1.705 E.04618 G2 X-20.595 Y-17.899 I5.239 J-4.43 E.04544 G1 X-20.267 Y-17.775 E.01163 G2 X-18.458 Y-18.633 I.11 J-2.105 E.06922 G2 X-16.816 Y-19.081 I.06 J-3.013 E.05724 G1 X-16.336 Y-18.85 E.01764 G2 X-15.354 Y-17.899 I5.239 J-4.43 E.04544 G1 X-15.026 Y-17.775 E.01163 G2 X-13.716 Y-18.118 I.253 J-1.705 E.04618 G3 X-12.733 Y-19.069 I5.239 J4.43 E.04544 G1 X-12.405 Y-19.194 E.01163 G3 X-11.095 Y-18.85 I.253 J1.705 E.04618 G2 X-10.112 Y-17.899 I5.239 J-4.43 E.04544 G1 X-9.785 Y-17.775 E.01163 G2 X-8.474 Y-18.118 I.253 J-1.705 E.04618 G3 X-7.492 Y-19.069 I5.239 J4.43 E.04544 G1 X-7.164 Y-19.194 E.01163 G3 X-5.854 Y-18.85 I.253 J1.705 E.04618 G2 X-4.871 Y-17.899 I5.239 J-4.43 E.04544 G1 X-4.543 Y-17.775 E.01163 G2 X-3.233 Y-18.118 I.253 J-1.705 E.04618 G3 X-2.25 Y-19.069 I5.239 J4.43 E.04544 G1 X-1.923 Y-19.194 E.01163 G3 X-.612 Y-18.85 I.253 J1.705 E.04618 G2 X.37 Y-17.899 I5.239 J-4.43 E.04544 G1 X.698 Y-17.775 E.01163 G2 X2.008 Y-18.118 I.253 J-1.705 E.04618 G3 X2.991 Y-19.069 I5.239 J4.43 E.04544 G1 X3.319 Y-19.194 E.01163 G3 X4.629 Y-18.85 I.253 J1.705 E.04618 G2 X5.612 Y-17.899 I5.239 J-4.43 E.04544 G1 X5.939 Y-17.775 E.01163 G2 X7.25 Y-18.118 I.253 J-1.705 E.04618 G3 X8.232 Y-19.069 I5.239 J4.43 E.04544 G1 X8.56 Y-19.194 E.01163 G3 X9.87 Y-18.85 I.253 J1.705 E.04618 G2 X10.853 Y-17.899 I5.239 J-4.43 E.04544 G1 X11.181 Y-17.775 E.01163 G2 X12.491 Y-18.118 I.253 J-1.705 E.04618 G3 X13.474 Y-19.069 I5.239 J4.43 E.04544 G1 X13.801 Y-19.194 E.01163 G3 X15.112 Y-18.85 I.253 J1.705 E.04618 G2 X16.094 Y-17.899 I5.239 J-4.43 E.04544 G1 X16.422 Y-17.775 E.01163 G2 X17.732 Y-18.118 I.253 J-1.705 E.04618 G3 X18.937 Y-19.154 I2.923 J2.182 E.05312 G1 X18.937 Y-21.362 E.07325 G3 X17.732 Y-20.395 I-2.234 J-1.55 E.05196 G3 X16.422 Y-20.739 I-.253 J-1.705 E.04618 G2 X15.439 Y-21.69 I-5.239 J4.43 E.04544 G1 X15.112 Y-21.815 E.01163 G2 X13.801 Y-21.471 I-.253 J1.705 E.04618 G3 X12.819 Y-20.52 I-5.239 J-4.43 E.04544 G1 X12.491 Y-20.395 E.01163 G3 X11.181 Y-20.739 I-.253 J-1.705 E.04618 G2 X10.198 Y-21.69 I-5.239 J4.43 E.04544 G1 X9.87 Y-21.815 E.01163 G2 X8.56 Y-21.471 I-.253 J1.705 E.04618 G3 X7.577 Y-20.52 I-5.239 J-4.43 E.04544 G1 X7.25 Y-20.395 E.01163 G3 X5.939 Y-20.739 I-.253 J-1.705 E.04618 G2 X4.957 Y-21.69 I-5.239 J4.43 E.04544 G1 X4.629 Y-21.815 E.01163 G2 X3.319 Y-21.471 I-.253 J1.705 E.04618 G3 X2.336 Y-20.52 I-5.239 J-4.43 E.04544 G1 X2.008 Y-20.395 E.01163 G3 X.698 Y-20.739 I-.253 J-1.705 E.04618 G2 X-.285 Y-21.69 I-5.239 J4.43 E.04544 G1 X-.612 Y-21.815 E.01163 G2 X-1.923 Y-21.471 I-.253 J1.705 E.04618 G3 X-2.905 Y-20.52 I-5.239 J-4.43 E.04544 G1 X-3.233 Y-20.395 E.01163 G3 X-4.543 Y-20.739 I-.253 J-1.705 E.04618 G2 X-5.526 Y-21.69 I-5.239 J4.43 E.04544 G1 X-5.854 Y-21.815 E.01163 G2 X-7.164 Y-21.471 I-.253 J1.705 E.04618 G3 X-8.147 Y-20.52 I-5.239 J-4.43 E.04544 G1 X-8.474 Y-20.395 E.01163 G3 X-9.785 Y-20.739 I-.253 J-1.705 E.04618 G2 X-10.767 Y-21.69 I-5.239 J4.43 E.04544 G1 X-11.095 Y-21.815 E.01163 G2 X-12.405 Y-21.471 I-.253 J1.705 E.04618 G3 X-13.388 Y-20.52 I-5.239 J-4.43 E.04544 G1 X-13.716 Y-20.395 E.01163 G3 X-15.026 Y-20.739 I-.253 J-1.705 E.04618 G1 X-15.64 Y-21.371 E.02923 G2 X-18.385 Y-23.948 I-2.664 J.087 E.13871 G3 X-17.647 Y-24.435 I1.342 J1.232 E.02965 G3 X-16.336 Y-24.092 I.253 J1.705 E.04618 G2 X-15.354 Y-23.141 I5.239 J-4.43 E.04544 G1 X-15.026 Y-23.016 E.01163 G2 X-13.716 Y-23.36 I.253 J-1.705 E.04618 G3 X-12.733 Y-24.311 I5.239 J4.43 E.04544 G1 X-12.405 Y-24.435 E.01163 G3 X-11.095 Y-24.092 I.253 J1.705 E.04618 G2 X-10.112 Y-23.141 I5.239 J-4.43 E.04544 G1 X-9.785 Y-23.016 E.01163 G2 X-8.474 Y-23.36 I.253 J-1.705 E.04618 G3 X-7.492 Y-24.311 I5.239 J4.43 E.04544 G1 X-7.164 Y-24.435 E.01163 G3 X-5.854 Y-24.092 I.253 J1.705 E.04618 G2 X-4.871 Y-23.141 I5.239 J-4.43 E.04544 G1 X-4.543 Y-23.016 E.01163 G2 X-3.233 Y-23.36 I.253 J-1.705 E.04618 G3 X-2.25 Y-24.311 I5.239 J4.43 E.04544 G1 X-1.923 Y-24.435 E.01163 G3 X-.612 Y-24.092 I.253 J1.705 E.04618 G2 X.37 Y-23.141 I5.239 J-4.43 E.04544 G1 X.698 Y-23.016 E.01163 G2 X2.008 Y-23.36 I.253 J-1.705 E.04618 G3 X2.991 Y-24.311 I5.239 J4.43 E.04544 G1 X3.319 Y-24.435 E.01163 G3 X4.629 Y-24.092 I.253 J1.705 E.04618 G2 X5.612 Y-23.141 I5.239 J-4.43 E.04544 G1 X5.939 Y-23.016 E.01163 G2 X7.25 Y-23.36 I.253 J-1.705 E.04618 G3 X8.232 Y-24.311 I5.239 J4.43 E.04544 G1 X8.56 Y-24.435 E.01163 G3 X9.87 Y-24.092 I.253 J1.705 E.04618 G2 X10.853 Y-23.141 I5.239 J-4.43 E.04544 G1 X11.181 Y-23.016 E.01163 G2 X12.491 Y-23.36 I.253 J-1.705 E.04618 G3 X13.474 Y-24.311 I5.239 J4.43 E.04544 G1 X13.801 Y-24.435 E.01163 G3 X15.112 Y-24.092 I.253 J1.705 E.04618 G2 X16.094 Y-23.141 I5.239 J-4.43 E.04544 G1 X16.422 Y-23.016 E.01163 G2 X17.732 Y-23.36 I.253 J-1.705 E.04618 G3 X18.937 Y-24.395 I2.923 J2.181 E.05312 G1 X18.937 Y-26.603 E.07325 G3 X17.732 Y-25.637 I-2.234 J-1.55 E.05196 G3 X16.422 Y-25.98 I-.253 J-1.705 E.04618 G2 X15.439 Y-26.931 I-5.239 J4.43 E.04544 G1 X15.112 Y-27.056 E.01163 G2 X13.801 Y-26.712 I-.253 J1.705 E.04618 G3 X12.819 Y-25.761 I-5.239 J-4.43 E.04544 G1 X12.491 Y-25.637 E.01163 G3 X11.181 Y-25.98 I-.253 J-1.705 E.04618 G2 X10.198 Y-26.931 I-5.239 J4.43 E.04544 G1 X9.87 Y-27.056 E.01163 G2 X8.56 Y-26.712 I-.253 J1.705 E.04618 G3 X7.577 Y-25.761 I-5.239 J-4.43 E.04544 G1 X7.25 Y-25.637 E.01163 G3 X5.939 Y-25.98 I-.253 J-1.705 E.04618 G2 X4.957 Y-26.931 I-5.239 J4.43 E.04544 G1 X4.629 Y-27.056 E.01163 G2 X3.319 Y-26.712 I-.253 J1.705 E.04618 G3 X2.336 Y-25.761 I-5.239 J-4.43 E.04544 G1 X2.008 Y-25.637 E.01163 G3 X.698 Y-25.98 I-.253 J-1.705 E.04618 G2 X-.285 Y-26.931 I-5.239 J4.43 E.04544 G1 X-.612 Y-27.056 E.01163 G2 X-1.923 Y-26.712 I-.253 J1.705 E.04618 G3 X-2.905 Y-25.761 I-5.239 J-4.43 E.04544 G1 X-3.233 Y-25.637 E.01163 G3 X-4.543 Y-25.98 I-.253 J-1.705 E.04618 G2 X-5.526 Y-26.931 I-5.239 J4.43 E.04544 G1 X-5.854 Y-27.056 E.01163 G2 X-7.164 Y-26.712 I-.253 J1.705 E.04618 G3 X-8.147 Y-25.761 I-5.239 J-4.43 E.04544 G1 X-8.474 Y-25.637 E.01163 G3 X-9.785 Y-25.98 I-.253 J-1.705 E.04618 G2 X-10.767 Y-26.931 I-5.239 J4.43 E.04544 G1 X-11.095 Y-27.056 E.01163 G2 X-12.405 Y-26.712 I-.253 J1.705 E.04618 G3 X-13.388 Y-25.761 I-5.239 J-4.43 E.04544 G1 X-13.716 Y-25.637 E.01163 G3 X-15.026 Y-25.98 I-.253 J-1.705 E.04618 G2 X-16.009 Y-26.931 I-5.239 J4.43 E.04544 G1 X-16.336 Y-27.056 E.01163 G2 X-17.647 Y-26.712 I-.253 J1.705 E.04618 G3 X-18.629 Y-25.761 I-5.239 J-4.43 E.04544 G1 X-18.957 Y-25.637 E.01163 G3 X-20.267 Y-25.98 I-.253 J-1.705 E.04618 G2 X-21.25 Y-26.931 I-5.239 J4.43 E.04544 G1 X-21.578 Y-27.056 E.01163 G2 X-22.888 Y-26.712 I-.253 J1.705 E.04618 G3 X-23.871 Y-25.761 I-5.239 J-4.43 E.04544 G1 X-24.198 Y-25.637 E.01163 G3 X-25.509 Y-25.98 I-.253 J-1.705 E.04618 G2 X-26.491 Y-26.931 I-5.239 J4.43 E.04544 G1 X-26.819 Y-27.056 E.01163 G2 X-28.129 Y-26.712 I-.253 J1.705 E.04618 G3 X-29.112 Y-25.761 I-5.239 J-4.43 E.04544 G1 X-29.44 Y-25.637 E.01163 G3 X-30.75 Y-25.98 I-.253 J-1.705 E.04618 G2 X-31.733 Y-26.931 I-5.239 J4.43 E.04544 G1 X-32.06 Y-27.056 E.01163 G2 X-33.37 Y-26.712 I-.253 J1.705 E.04618 G3 X-34.353 Y-25.761 I-5.239 J-4.43 E.04544 G1 X-34.681 Y-25.637 E.01163 G3 X-35.991 Y-25.98 I-.253 J-1.705 E.04618 G2 X-36.974 Y-26.931 I-5.239 J4.43 E.04544 G1 X-37.301 Y-27.056 E.01163 G2 X-38.612 Y-26.712 I-.253 J1.705 E.04618 G3 X-39.537 Y-25.81 I-4.968 J-4.167 E.04294 G1 X-39.537 Y-23.757 E.06811 G3 X-38.612 Y-24.435 I1.671 J1.308 E.03854 G3 X-37.269 Y-24.058 I.254 J1.673 E.04769 G3 X-34.465 Y-23.582 I.943 J2.941 E.09804 G3 X-33.37 Y-24.435 I2.009 J1.448 E.04666 G3 X-32.06 Y-24.092 I.253 J1.705 E.04618 G2 X-31.077 Y-23.141 I5.239 J-4.43 E.04544 G1 X-30.75 Y-23.016 E.01163 G2 X-29.44 Y-23.36 I.253 J-1.705 E.04618 G3 X-28.457 Y-24.311 I5.239 J4.43 E.04544 G1 X-28.129 Y-24.435 E.01163 G3 X-26.819 Y-24.092 I.253 J1.705 E.04618 G2 X-25.836 Y-23.141 I5.239 J-4.43 E.04544 G1 X-25.509 Y-23.016 E.01163 G2 X-24.198 Y-23.36 I.253 J-1.705 E.04618 G3 X-23.215 Y-24.311 I5.239 J4.43 E.04544 G1 X-22.888 Y-24.435 E.01163 G3 X-21.578 Y-24.092 I.253 J1.705 E.04618 G2 X-20.595 Y-23.141 I5.239 J-4.43 E.04544 G1 X-20.309 Y-23.032 E.01015 G2 X-20.956 Y-21.442 I2.346 J1.881 E.05774 G2 X-22.233 Y-21.786 I-.916 J.859 E.0462 G1 X-22.888 Y-21.471 E.02411 G3 X-23.871 Y-20.52 I-5.239 J-4.43 E.04544 G1 X-24.198 Y-20.395 E.01163 G3 X-25.509 Y-20.739 I-.253 J-1.705 E.04618 G2 X-26.491 Y-21.69 I-5.239 J4.43 E.04544 G1 X-26.819 Y-21.815 E.01163 G2 X-28.129 Y-21.471 I-.253 J1.705 E.04618 G3 X-29.112 Y-20.52 I-5.239 J-4.43 E.04544 G1 X-29.44 Y-20.395 E.01163 G3 X-30.75 Y-20.739 I-.253 J-1.705 E.04618 G2 X-31.733 Y-21.69 I-5.239 J4.43 E.04544 G1 X-32.06 Y-21.815 E.01163 G2 X-33.371 Y-21.47 I-.253 J1.704 E.04621 G3 X-33.712 Y-19.901 I-2.95 J.181 E.05395 G1 X-19.74 Y-37.051 F30000 G1 F16200 G2 X-18.196 Y-36.629 I1.559 J-2.667 E.05372 G3 X-18.629 Y-36.244 I-2.14 J-1.971 E.01927 G3 X-20.267 Y-36.463 I-.614 J-1.645 E.05707 G2 X-21.25 Y-37.414 I-5.239 J4.43 E.04544 G2 X-22.888 Y-37.195 I-.614 J1.645 E.05707 G3 X-23.871 Y-36.244 I-5.239 J-4.43 E.04544 G3 X-25.509 Y-36.463 I-.614 J-1.645 E.05707 G2 X-26.491 Y-37.414 I-5.239 J4.43 E.04544 G2 X-28.129 Y-37.195 I-.614 J1.645 E.05707 G3 X-29.112 Y-36.244 I-5.239 J-4.43 E.04544 G3 X-30.75 Y-36.463 I-.614 J-1.645 E.05707 G2 X-31.733 Y-37.414 I-5.239 J4.43 E.04544 G2 X-33.37 Y-37.195 I-.614 J1.645 E.05707 G1 X-34.026 Y-36.52 E.0312 G3 X-35.836 Y-36.388 I-.98 J-.957 E.06582 G3 X-38.44 Y-37.278 I-.458 J-2.915 E.09495 G1 X-38.612 Y-37.195 E.00633 G3 X-39.537 Y-36.292 I-4.968 J-4.167 E.04294 G1 X-39.537 Y-34.239 E.06811 G3 X-38.939 Y-34.793 I3.065 J2.705 E.02708 G3 X-37.301 Y-34.574 I.614 J1.645 E.05707 G2 X-36.319 Y-33.623 I5.239 J-4.43 E.04544 G2 X-34.681 Y-33.842 I.614 J-1.645 E.05707 G3 X-33.698 Y-34.793 I5.239 J4.43 E.04544 G3 X-32.06 Y-34.574 I.614 J1.645 E.05707 G2 X-31.077 Y-33.623 I5.239 J-4.43 E.04544 G2 X-29.44 Y-33.842 I.614 J-1.645 E.05707 G3 X-28.457 Y-34.793 I5.239 J4.43 E.04544 G3 X-26.819 Y-34.574 I.614 J1.645 E.05707 G2 X-25.836 Y-33.623 I5.239 J-4.43 E.04544 G2 X-24.198 Y-33.842 I.614 J-1.645 E.05707 G3 X-23.215 Y-34.793 I5.239 J4.43 E.04544 G3 X-21.578 Y-34.574 I.614 J1.645 E.05707 G2 X-20.595 Y-33.623 I5.239 J-4.43 E.04544 G2 X-18.957 Y-33.842 I.614 J-1.645 E.05707 G3 X-17.974 Y-34.793 I5.239 J4.43 E.04544 G3 X-16.336 Y-34.574 I.614 J1.645 E.05707 G2 X-15.354 Y-33.623 I5.239 J-4.43 E.04544 G2 X-13.716 Y-33.842 I.614 J-1.645 E.05707 G3 X-12.733 Y-34.793 I5.239 J4.43 E.04544 G3 X-11.095 Y-34.574 I.614 J1.645 E.05707 G2 X-10.112 Y-33.623 I5.239 J-4.43 E.04544 G2 X-8.474 Y-33.842 I.614 J-1.645 E.05707 G3 X-7.492 Y-34.793 I5.239 J4.43 E.04544 G3 X-5.854 Y-34.574 I.614 J1.645 E.05707 G2 X-4.871 Y-33.623 I5.239 J-4.43 E.04544 G2 X-3.233 Y-33.842 I.614 J-1.645 E.05707 G3 X-2.25 Y-34.793 I5.239 J4.43 E.04544 G3 X-.612 Y-34.574 I.614 J1.645 E.05707 G2 X.37 Y-33.623 I5.239 J-4.43 E.04544 G2 X2.008 Y-33.842 I.614 J-1.645 E.05707 G3 X2.991 Y-34.793 I5.239 J4.43 E.04544 G3 X4.629 Y-34.574 I.614 J1.645 E.05707 G2 X5.612 Y-33.623 I5.239 J-4.43 E.04544 G2 X7.25 Y-33.842 I.614 J-1.645 E.05707 G3 X8.232 Y-34.793 I5.239 J4.43 E.04544 G3 X9.87 Y-34.574 I.614 J1.645 E.05707 G2 X10.853 Y-33.623 I5.239 J-4.43 E.04544 G2 X12.491 Y-33.842 I.614 J-1.645 E.05707 G3 X13.474 Y-34.793 I5.239 J4.43 E.04544 G3 X15.112 Y-34.574 I.614 J1.645 E.05707 G2 X16.094 Y-33.623 I5.239 J-4.43 E.04544 G2 X17.732 Y-33.842 I.614 J-1.645 E.05707 G1 X18.387 Y-34.517 E.0312 G3 X18.937 Y-34.878 I.789 J.604 E.02222 G1 X18.937 Y-37.086 E.07325 G3 X18.06 Y-36.244 I-4.643 J-3.957 E.0404 G3 X16.422 Y-36.463 I-.614 J-1.645 E.05707 G2 X15.439 Y-37.414 I-5.239 J4.43 E.04544 G2 X13.801 Y-37.195 I-.614 J1.645 E.05707 G3 X12.819 Y-36.244 I-5.239 J-4.43 E.04544 G3 X11.181 Y-36.463 I-.614 J-1.645 E.05707 G2 X10.198 Y-37.414 I-5.239 J4.43 E.04544 G2 X8.56 Y-37.195 I-.614 J1.645 E.05707 G3 X7.577 Y-36.244 I-5.239 J-4.43 E.04544 G3 X5.939 Y-36.463 I-.614 J-1.645 E.05707 G2 X4.957 Y-37.414 I-5.239 J4.43 E.04544 G2 X3.319 Y-37.195 I-.614 J1.645 E.05707 G3 X2.336 Y-36.244 I-5.239 J-4.43 E.04544 G3 X.698 Y-36.463 I-.614 J-1.645 E.05707 G2 X-.285 Y-37.414 I-5.239 J4.43 E.04544 G2 X-1.923 Y-37.195 I-.614 J1.645 E.05707 G3 X-2.905 Y-36.244 I-5.239 J-4.43 E.04544 G3 X-4.543 Y-36.463 I-.614 J-1.645 E.05707 G2 X-5.526 Y-37.414 I-5.239 J4.43 E.04544 G2 X-7.164 Y-37.195 I-.614 J1.645 E.05707 G3 X-8.147 Y-36.244 I-5.239 J-4.43 E.04544 G3 X-9.785 Y-36.463 I-.614 J-1.645 E.05707 G2 X-10.767 Y-37.414 I-5.239 J4.43 E.04544 G2 X-12.405 Y-37.195 I-.614 J1.645 E.05707 G3 X-13.388 Y-36.244 I-5.239 J-4.43 E.04544 G3 X-15.026 Y-36.463 I-.614 J-1.645 E.05707 G1 X-15.681 Y-37.138 E.0312 G2 X-16.306 Y-37.527 I-.868 J.697 E.0249 G2 X-15.646 Y-39.111 I-2.329 J-1.901 E.05772 G1 X-15.354 Y-38.864 E.01268 G2 X-13.716 Y-39.084 I.614 J-1.645 E.05707 G3 X-12.733 Y-40.035 I5.239 J4.43 E.04544 G3 X-11.095 Y-39.816 I.614 J1.645 E.05707 G2 X-10.112 Y-38.864 I5.239 J-4.43 E.04544 G2 X-8.474 Y-39.084 I.614 J-1.645 E.05707 G3 X-7.492 Y-40.035 I5.239 J4.43 E.04544 G3 X-5.854 Y-39.816 I.614 J1.645 E.05707 G2 X-4.871 Y-38.864 I5.239 J-4.43 E.04544 G2 X-3.233 Y-39.084 I.614 J-1.645 E.05707 G3 X-2.25 Y-40.035 I5.239 J4.43 E.04544 G3 X-.612 Y-39.816 I.614 J1.645 E.05707 G2 X.37 Y-38.864 I5.239 J-4.43 E.04544 G2 X2.008 Y-39.084 I.614 J-1.645 E.05707 G3 X2.991 Y-40.035 I5.239 J4.43 E.04544 G3 X4.629 Y-39.816 I.614 J1.645 E.05707 G2 X5.612 Y-38.864 I5.239 J-4.43 E.04544 G2 X7.25 Y-39.084 I.614 J-1.645 E.05707 G3 X8.232 Y-40.035 I5.239 J4.43 E.04544 G3 X9.87 Y-39.816 I.614 J1.645 E.05707 G2 X10.853 Y-38.864 I5.239 J-4.43 E.04544 G2 X12.491 Y-39.084 I.614 J-1.645 E.05707 G3 X13.474 Y-40.035 I5.239 J4.43 E.04544 G3 X15.112 Y-39.816 I.614 J1.645 E.05707 G2 X16.094 Y-38.864 I5.239 J-4.43 E.04544 G2 X17.732 Y-39.084 I.614 J-1.645 E.05707 G1 X18.387 Y-39.758 E.0312 G3 X18.937 Y-40.119 I.789 J.604 E.02222 G1 X18.937 Y-42.327 E.07325 G3 X18.06 Y-41.485 I-4.643 J-3.957 E.0404 G3 X16.422 Y-41.704 I-.614 J-1.645 E.05707 G2 X15.439 Y-42.655 I-5.239 J4.43 E.04544 G2 X13.801 Y-42.436 I-.614 J1.645 E.05707 G3 X12.819 Y-41.485 I-5.239 J-4.43 E.04544 G3 X11.181 Y-41.704 I-.614 J-1.645 E.05707 G2 X10.198 Y-42.655 I-5.239 J4.43 E.04544 G2 X8.56 Y-42.436 I-.614 J1.645 E.05707 G3 X7.577 Y-41.485 I-5.239 J-4.43 E.04544 M73 P27 R58 G3 X5.939 Y-41.704 I-.614 J-1.645 E.05707 G2 X4.957 Y-42.655 I-5.239 J4.43 E.04544 G2 X3.319 Y-42.436 I-.614 J1.645 E.05707 G3 X2.336 Y-41.485 I-5.239 J-4.43 E.04544 G3 X.698 Y-41.704 I-.614 J-1.645 E.05707 G2 X-.285 Y-42.655 I-5.239 J4.43 E.04544 G2 X-1.923 Y-42.436 I-.614 J1.645 E.05707 G3 X-2.905 Y-41.485 I-5.239 J-4.43 E.04544 G3 X-4.543 Y-41.704 I-.614 J-1.645 E.05707 G2 X-5.526 Y-42.655 I-5.239 J4.43 E.04544 G2 X-7.164 Y-42.436 I-.614 J1.645 E.05707 G3 X-8.147 Y-41.485 I-5.239 J-4.43 E.04544 G3 X-9.785 Y-41.704 I-.614 J-1.645 E.05707 G2 X-10.767 Y-42.655 I-5.239 J4.43 E.04544 G2 X-12.405 Y-42.436 I-.614 J1.645 E.05707 G3 X-13.388 Y-41.485 I-5.239 J-4.43 E.04544 G3 X-15.026 Y-41.704 I-.614 J-1.645 E.05707 G1 X-15.681 Y-42.379 E.0312 G2 X-16.336 Y-42.78 I-.9 J.735 E.02597 G2 X-18.126 Y-41.942 I-.113 J2.09 E.06826 G2 X-19.805 Y-41.482 I-.181 J2.631 E.05885 G1 X-20.267 Y-41.704 E.01702 G2 X-21.25 Y-42.655 I-5.239 J4.43 E.04544 G2 X-22.888 Y-42.436 I-.614 J1.645 E.05707 G3 X-23.871 Y-41.485 I-5.239 J-4.43 E.04544 G3 X-25.509 Y-41.704 I-.614 J-1.645 E.05707 G2 X-26.491 Y-42.655 I-5.239 J4.43 E.04544 G2 X-28.129 Y-42.436 I-.614 J1.645 E.05707 G3 X-29.112 Y-41.485 I-5.239 J-4.43 E.04544 G3 X-30.75 Y-41.704 I-.614 J-1.645 E.05707 G2 X-31.733 Y-42.655 I-5.239 J4.43 E.04544 G2 X-33.37 Y-42.436 I-.614 J1.645 E.05707 G3 X-34.354 Y-41.485 I-6.22 J-5.446 E.04545 G3 X-33.482 Y-40.117 I-1.969 J2.217 E.05451 G3 X-32.06 Y-39.816 I.342 J1.895 E.04945 G2 X-31.077 Y-38.864 I5.239 J-4.43 E.04544 G2 X-29.44 Y-39.084 I.614 J-1.645 E.05707 G3 X-28.457 Y-40.035 I5.239 J4.43 E.04544 G3 X-26.819 Y-39.816 I.614 J1.645 E.05707 G2 X-25.836 Y-38.864 I5.239 J-4.43 E.04544 G2 X-24.198 Y-39.084 I.614 J-1.645 E.05707 G3 X-23.215 Y-40.035 I5.239 J4.43 E.04544 G3 X-21.578 Y-39.816 I.614 J1.645 E.05707 G1 X-20.959 Y-39.178 E.02948 G3 X-20.54 Y-40.723 I3.089 J.007 E.05372 G1 X-21.979 Y-59.737 F30000 G1 F16200 G1 X6.437 Y-59.727 E.94261 G1 X6.437 Y-57.189 E.08419 G1 X5.939 Y-57.428 E.01831 G2 X4.957 Y-58.379 I-5.239 J4.43 E.04544 G1 X4.629 Y-58.504 E.01163 G2 X3.319 Y-58.16 I-.253 J1.705 E.04618 G3 X2.336 Y-57.209 I-5.239 J-4.43 E.04544 G1 X2.008 Y-57.084 E.01163 G3 X.698 Y-57.428 I-.253 J-1.705 E.04618 G2 X-.285 Y-58.379 I-5.239 J4.43 E.04544 G1 X-.612 Y-58.504 E.01163 G2 X-1.923 Y-58.16 I-.253 J1.705 E.04618 G3 X-2.905 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-3.233 Y-57.084 E.01163 G3 X-4.543 Y-57.428 I-.253 J-1.705 E.04618 G2 X-5.526 Y-58.379 I-5.239 J4.43 E.04544 G1 X-5.854 Y-58.504 E.01163 G2 X-7.164 Y-58.16 I-.253 J1.705 E.04618 G3 X-8.147 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-8.474 Y-57.084 E.01163 G3 X-9.785 Y-57.428 I-.253 J-1.705 E.04618 G2 X-10.767 Y-58.379 I-5.239 J4.43 E.04544 G1 X-11.095 Y-58.504 E.01163 G2 X-12.405 Y-58.16 I-.253 J1.705 E.04618 G3 X-13.388 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-13.716 Y-57.084 E.01163 G3 X-15.026 Y-57.428 I-.253 J-1.705 E.04618 G2 X-16.009 Y-58.379 I-5.239 J4.43 E.04544 G1 X-16.336 Y-58.504 E.01163 G2 X-17.647 Y-58.16 I-.253 J1.705 E.04618 G3 X-18.629 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-18.957 Y-57.084 E.01163 G3 X-20.267 Y-57.428 I-.253 J-1.705 E.04618 G2 X-21.25 Y-58.379 I-5.239 J4.43 E.04544 G1 X-21.578 Y-58.504 E.01163 G2 X-22.888 Y-58.16 I-.253 J1.705 E.04618 G3 X-23.871 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-24.198 Y-57.084 E.01163 G3 X-25.509 Y-57.428 I-.253 J-1.705 E.04618 G2 X-26.491 Y-58.379 I-5.239 J4.43 E.04544 G2 X-27.037 Y-58.494 I-.406 J.574 E.01902 G1 X-27.037 Y-59.737 E.04122 G1 X-23.219 Y-59.737 E.12665 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 X-27.037 Y-57.273 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-27.037 Y-55.644 E.05401 G1 X-26.819 Y-55.539 E.00802 G2 X-25.836 Y-54.588 I5.239 J-4.43 E.04544 G2 X-24.198 Y-54.807 I.614 J-1.645 E.05707 G3 X-23.215 Y-55.759 I5.239 J4.43 E.04544 G3 X-21.578 Y-55.539 I.614 J1.645 E.05707 G2 X-20.595 Y-54.588 I5.239 J-4.43 E.04544 G2 X-18.957 Y-54.807 I.614 J-1.645 E.05707 G3 X-17.974 Y-55.759 I5.239 J4.43 E.04544 G3 X-16.336 Y-55.539 I.614 J1.645 E.05707 G2 X-15.354 Y-54.588 I5.239 J-4.43 E.04544 G2 X-13.716 Y-54.807 I.614 J-1.645 E.05707 G3 X-12.733 Y-55.759 I5.239 J4.43 E.04544 G3 X-11.095 Y-55.539 I.614 J1.645 E.05707 G2 X-10.112 Y-54.588 I5.239 J-4.43 E.04544 G2 X-8.474 Y-54.807 I.614 J-1.645 E.05707 G3 X-7.492 Y-55.759 I5.239 J4.43 E.04544 G3 X-5.854 Y-55.539 I.614 J1.645 E.05707 G2 X-4.871 Y-54.588 I5.239 J-4.43 E.04544 G2 X-3.233 Y-54.807 I.614 J-1.645 E.05707 G3 X-2.25 Y-55.759 I5.239 J4.43 E.04544 G3 X-.612 Y-55.539 I.614 J1.645 E.05707 G2 X.37 Y-54.588 I5.239 J-4.43 E.04544 G2 X2.008 Y-54.807 I.614 J-1.645 E.05707 G3 X2.991 Y-55.759 I5.239 J4.43 E.04544 G3 X4.629 Y-55.539 I.614 J1.645 E.05707 G1 X5.284 Y-54.865 E.0312 G2 X6.437 Y-54.486 I.891 J-.767 E.04229 G1 X6.437 Y-52.857 E.05401 G1 X6.851 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X14.549 Y-60 E.19 G1 X14.963 Y-57.239 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.963 Y-55.611 E.05401 G1 X15.112 Y-55.539 E.00546 G2 X16.094 Y-54.588 I5.239 J-4.43 E.04544 G1 X16.422 Y-54.464 E.01163 G2 X17.732 Y-54.807 I.253 J-1.705 E.04618 G3 X18.715 Y-55.759 I5.239 J4.43 E.04544 G1 X19.043 Y-55.883 E.01163 G3 X20.353 Y-55.539 I.253 J1.705 E.04618 G2 X21.336 Y-54.588 I5.239 J-4.43 E.04544 G1 X21.663 Y-54.464 E.01163 G2 X22.974 Y-54.807 I.253 J-1.705 E.04618 G3 X23.956 Y-55.759 I5.239 J4.43 E.04544 G1 X24.284 Y-55.883 E.01163 G3 X25.594 Y-55.539 I.253 J1.705 E.04618 G2 X26.577 Y-54.588 I5.239 J-4.43 E.04544 G1 X26.905 Y-54.464 E.01163 G2 X28.215 Y-54.807 I.253 J-1.705 E.04618 G3 X29.198 Y-55.759 I5.239 J4.43 E.04544 G1 X29.525 Y-55.883 E.01163 G3 X30.937 Y-55.435 I.112 J2.095 E.05021 G1 X30.937 Y-53.224 E.07335 G1 X30.835 Y-53.263 E.0036 G2 X29.525 Y-52.919 I-.253 J1.705 E.04618 G1 X28.889 Y-52.263 E.03031 G1 X26.83 Y-52.263 E.06828 G2 X25.594 Y-53.263 I-2.299 J1.58 E.05347 G2 X24.284 Y-52.919 I-.253 J1.705 E.04618 G1 X23.647 Y-52.263 E.03031 G1 X21.589 Y-52.263 E.06828 G2 X20.353 Y-53.263 I-2.299 J1.58 E.05347 G2 X19.043 Y-52.919 I-.253 J1.705 E.04618 G3 X18.06 Y-51.968 I-5.239 J-4.43 E.04544 G1 X17.732 Y-51.843 E.01163 G3 X16.422 Y-52.187 I-.253 J-1.705 E.04618 G2 X15.439 Y-53.138 I-5.239 J4.43 E.04544 G2 X14.963 Y-53.256 I-.375 J.492 E.01673 G1 X14.963 Y-52.737 E.01722 G1 X13.625 Y-52.737 E.0444 G3 X12.491 Y-51.843 I-2.089 J-1.484 E.04854 G3 X10.647 Y-52.737 I-.105 J-2.134 E.0709 G1 X8.383 Y-52.737 E.07508 G3 X7.25 Y-51.843 I-2.089 J-1.484 E.04854 G3 X5.939 Y-52.187 I-.253 J-1.705 E.04618 G2 X4.957 Y-53.138 I-5.239 J4.43 E.04544 G1 X4.629 Y-53.263 E.01163 G2 X3.319 Y-52.919 I-.253 J1.705 E.04618 G3 X2.336 Y-51.968 I-5.239 J-4.43 E.04544 G1 X2.008 Y-51.843 E.01163 G3 X.698 Y-52.187 I-.253 J-1.705 E.04618 G2 X-.285 Y-53.138 I-5.239 J4.43 E.04544 G1 X-.612 Y-53.263 E.01163 G2 X-1.923 Y-52.919 I-.253 J1.705 E.04618 G3 X-2.905 Y-51.968 I-5.239 J-4.43 E.04544 G1 X-3.233 Y-51.843 E.01163 G3 X-4.543 Y-52.187 I-.253 J-1.705 E.04618 G2 X-5.526 Y-53.138 I-5.239 J4.43 E.04544 G1 X-5.854 Y-53.263 E.01163 G2 X-7.164 Y-52.919 I-.253 J1.705 E.04618 G3 X-8.147 Y-51.968 I-5.239 J-4.43 E.04544 G1 X-8.474 Y-51.843 E.01163 G3 X-9.785 Y-52.187 I-.253 J-1.705 E.04618 G2 X-10.767 Y-53.138 I-5.239 J4.43 E.04544 G1 X-11.095 Y-53.263 E.01163 G2 X-12.405 Y-52.919 I-.253 J1.705 E.04618 G3 X-13.388 Y-51.968 I-5.239 J-4.43 E.04544 G1 X-13.716 Y-51.843 E.01163 G3 X-15.026 Y-52.187 I-.253 J-1.705 E.04618 G2 X-16.009 Y-53.138 I-5.239 J4.43 E.04544 G1 X-16.336 Y-53.263 E.01163 G2 X-17.647 Y-52.919 I-.253 J1.705 E.04618 G3 X-18.629 Y-51.968 I-5.239 J-4.43 E.04544 G1 X-18.957 Y-51.843 E.01163 G3 X-20.267 Y-52.187 I-.253 J-1.705 E.04618 G2 X-21.25 Y-53.138 I-5.239 J4.43 E.04544 G1 X-21.578 Y-53.263 E.01163 G2 X-22.888 Y-52.919 I-.253 J1.705 E.04618 G3 X-23.871 Y-51.968 I-5.239 J-4.43 E.04544 G1 X-24.198 Y-51.843 E.01163 G3 X-25.509 Y-52.187 I-.253 J-1.705 E.04618 G2 X-26.491 Y-53.138 I-5.239 J4.43 E.04544 G2 X-27.037 Y-53.253 I-.406 J.574 E.01902 G1 X-27.037 Y-52.737 E.01712 G1 X-28.306 Y-52.737 E.04209 G3 X-29.44 Y-51.843 I-2.089 J-1.484 E.04854 G3 X-31.284 Y-52.737 I-.105 J-2.134 E.0709 G1 X-33.547 Y-52.737 E.07508 G3 X-34.681 Y-51.843 I-2.089 J-1.484 E.04854 G3 X-35.991 Y-52.187 I-.253 J-1.705 E.04618 G2 X-36.974 Y-53.138 I-5.239 J4.43 E.04544 G1 X-37.301 Y-53.263 E.01163 G2 X-38.612 Y-52.919 I-.253 J1.705 E.04618 G3 X-39.537 Y-52.016 I-4.968 J-4.167 E.04294 G1 X-39.537 Y-52.263 E.00819 G1 X-41.307 Y-52.263 E.0587 G2 X-42.543 Y-53.263 I-2.299 J1.58 E.05347 G2 X-43.853 Y-52.919 I-.253 J1.705 E.04618 G1 X-44.49 Y-52.263 E.03031 G1 X-46.548 Y-52.263 E.06828 G2 X-47.784 Y-53.263 I-2.299 J1.58 E.05347 G2 X-49.094 Y-52.919 I-.253 J1.705 E.04618 G1 X-49.731 Y-52.263 E.03031 G1 X-51.537 Y-52.263 E.05991 G1 X-51.537 Y-54.472 E.07326 G1 X-51.06 Y-54.493 E.01584 G1 X-50.405 Y-54.807 E.02411 G3 X-49.422 Y-55.759 I5.239 J4.43 E.04544 G1 X-49.094 Y-55.883 E.01163 G3 X-47.784 Y-55.539 I.253 J1.705 E.04618 G2 X-46.801 Y-54.588 I5.239 J-4.43 E.04544 G1 X-46.474 Y-54.464 E.01163 G2 X-45.163 Y-54.807 I.253 J-1.705 E.04618 G3 X-44.181 Y-55.759 I5.239 J4.43 E.04544 G1 X-43.853 Y-55.883 E.01163 G3 X-42.543 Y-55.539 I.253 J1.705 E.04618 G2 X-41.56 Y-54.588 I5.239 J-4.43 E.04544 G1 X-41.232 Y-54.464 E.01163 G2 X-39.922 Y-54.807 I.253 J-1.705 E.04618 G3 X-38.939 Y-55.759 I5.239 J4.43 E.04544 G1 X-38.612 Y-55.883 E.01163 G3 X-37.301 Y-55.539 I.253 J1.705 E.04618 G2 X-36.319 Y-54.588 I5.239 J-4.43 E.04544 G2 X-35.563 Y-54.483 I.5 J-.822 E.02602 G1 X-35.563 Y-52.854 E.05401 G1 X-48.186 Y-59.737 F30000 G1 F16200 G1 X-36.075 Y-59.737 E.40174 G2 X-35.563 Y-59.724 I.271 J-.586 E.01746 G1 X-35.563 Y-57.222 E.08298 G1 X-35.991 Y-57.428 E.01575 G2 X-36.974 Y-58.379 I-5.239 J4.43 E.04544 G1 X-37.301 Y-58.504 E.01163 G2 X-38.612 Y-58.16 I-.253 J1.705 E.04618 G3 X-39.595 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-39.922 Y-57.084 E.01163 G3 X-41.232 Y-57.428 I-.253 J-1.705 E.04618 G2 X-42.215 Y-58.379 I-5.239 J4.43 E.04544 G1 X-42.543 Y-58.504 E.01163 G2 X-43.853 Y-58.16 I-.253 J1.705 E.04618 G3 X-44.836 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-45.163 Y-57.084 E.01163 G3 X-46.474 Y-57.428 I-.253 J-1.705 E.04618 G2 X-47.457 Y-58.379 I-5.239 J4.43 E.04544 G1 X-47.784 Y-58.504 E.01163 G2 X-49.094 Y-58.16 I-.253 J1.705 E.04618 G3 X-50.077 Y-57.209 I-5.239 J-4.43 E.04544 G1 X-50.405 Y-57.084 E.01163 G3 X-51.537 Y-57.342 I-.264 J-1.454 E.03959 G1 X-51.537 Y-59.713 E.07863 G1 X-49.426 Y-59.737 E.07004 G1 X30.58 Y-59.737 F30000 G1 F16200 G1 X30.937 Y-59.737 E.01183 G1 X30.937 Y-58.465 E.04218 G1 X30.835 Y-58.504 E.0036 G2 X29.525 Y-58.16 I-.253 J1.705 E.04618 G3 X28.542 Y-57.209 I-5.239 J-4.43 E.04544 G1 X28.215 Y-57.084 E.01163 G3 X26.905 Y-57.428 I-.253 J-1.705 E.04618 G2 X25.922 Y-58.379 I-5.239 J4.43 E.04544 G1 X25.594 Y-58.504 E.01163 G2 X24.284 Y-58.16 I-.253 J1.705 E.04618 G3 X23.301 Y-57.209 I-5.239 J-4.43 E.04544 G1 X22.974 Y-57.084 E.01163 G3 X21.663 Y-57.428 I-.253 J-1.705 E.04618 G2 X20.68 Y-58.379 I-5.239 J4.43 E.04544 G1 X20.353 Y-58.504 E.01163 G2 X19.043 Y-58.16 I-.253 J1.705 E.04618 G3 X18.06 Y-57.209 I-5.239 J-4.43 E.04544 G1 X17.732 Y-57.084 E.01163 G3 X16.422 Y-57.428 I-.253 J-1.705 E.04618 G2 X15.439 Y-58.379 I-5.239 J4.43 E.04544 G2 X14.963 Y-58.497 I-.375 J.492 E.01673 G1 X14.963 Y-59.737 E.04112 G1 X29.194 Y-59.737 E.47207 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X27.194 Y-59.737 ;WIPE_END G1 X24.865 Y-52.469 Z2 F30000 G1 X8.763 Y-2.232 Z2 G1 Z1.6 G1 E.8 F1800 G1 F16200 G1 X8.763 Y-.603 E.05401 G3 X10.525 Y-.449 I.794 J1.073 E.06415 G1 X11.181 Y.226 E.0312 G2 X12.819 Y.445 I1.024 J-1.426 E.05707 G2 X13.801 Y-.506 I-4.256 J-5.381 E.04544 G3 X15.439 Y-.725 I1.024 J1.426 E.05707 G3 X16.422 Y.226 I-4.256 J5.381 E.04544 G2 X18.06 Y.445 I1.024 J-1.426 E.05707 G2 X19.043 Y-.506 I-4.256 J-5.381 E.04544 G3 X20.68 Y-.725 I1.024 J1.426 E.05707 G3 X21.663 Y.226 I-4.256 J5.381 E.04544 G2 X23.011 Y.556 I1.166 J-1.849 E.04684 G2 X23.727 Y2.089 I3.229 J-.573 E.05678 G2 X22.974 Y2.847 I3.405 J4.138 E.03549 G3 X21.336 Y3.066 I-1.024 J-1.426 E.05707 G3 X20.353 Y2.115 I4.256 J-5.381 E.04544 G2 X18.715 Y1.896 I-1.024 J1.426 E.05707 G2 X17.732 Y2.847 I4.256 J5.381 E.04544 G3 X16.094 Y3.066 I-1.024 J-1.426 E.05707 G3 X15.112 Y2.115 I4.256 J-5.381 E.04544 G2 X13.474 Y1.896 I-1.024 J1.426 E.05707 G2 X12.491 Y2.847 I4.256 J5.381 E.04544 G3 X11.181 Y3.191 I-1.057 J-1.36 E.04615 G3 X9.87 Y2.115 I1.435 J-3.085 E.05686 G1 X9.215 Y1.8 E.02411 G1 X8.763 Y1.78 E.01501 G1 X8.763 Y2.909 E.03744 G3 X9.244 Y2.778 I.736 J1.762 E.01659 G1 X12.085 Y4.222 F30000 G1 F16200 G3 X12.332 Y5.804 I-2.849 J1.255 E.05373 G2 X13.146 Y5.41 I-.018 J-1.076 E.03096 G1 X13.801 Y4.736 E.0312 G3 X15.439 Y4.516 I1.024 J1.426 E.05707 G3 X16.422 Y5.468 I-4.256 J5.381 E.04544 G2 X18.06 Y5.687 I1.024 J-1.426 E.05707 G2 X19.043 Y4.736 I-4.256 J-5.381 E.04544 G3 X20.68 Y4.516 I1.024 J1.426 E.05707 G3 X21.663 Y5.468 I-4.256 J5.381 E.04544 G2 X23.301 Y5.687 I1.024 J-1.426 E.05707 G2 X24.284 Y4.736 I-4.256 J-5.381 E.04544 G3 X25.922 Y4.516 I1.024 J1.426 E.05707 G3 X26.905 Y5.468 I-4.256 J5.381 E.04544 G1 X27.56 Y5.782 E.02411 G1 X27.937 Y5.799 E.01252 G1 X27.937 Y8.222 E.08037 G1 X27.56 Y8.403 E.01388 G1 X26.905 Y8.432 E.02175 G3 X26.249 Y8.031 I.244 J-1.135 E.02597 G1 X25.594 Y7.356 E.0312 G2 X23.956 Y7.137 I-1.024 J1.426 E.05707 G2 X22.974 Y8.088 I4.256 J5.381 E.04544 G3 X21.336 Y8.307 I-1.024 J-1.426 E.05707 G3 X20.353 Y7.356 I4.256 J-5.381 E.04544 G2 X18.715 Y7.137 I-1.024 J1.426 E.05707 G2 X17.732 Y8.088 I4.256 J5.381 E.04544 G3 X16.094 Y8.307 I-1.024 J-1.426 E.05707 G3 X15.112 Y7.356 I4.256 J-5.381 E.04544 G2 X13.474 Y7.137 I-1.024 J1.426 E.05707 G2 X12.491 Y8.088 I4.256 J5.381 E.04544 G3 X10.853 Y8.307 I-1.024 J-1.426 E.05707 G2 X10.39 Y7.975 I-.754 J.562 E.01921 G3 X8.85 Y7.921 I-.678 J-2.636 E.05183 G1 X22.189 Y17.737 F30000 G1 F16200 G1 X23.817 Y17.737 E.05401 G3 X25.382 Y17.737 I.782 J1.061 E.05557 G1 X27.01 Y17.737 E.05401 G1 X27.7 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y32.256 E.57795 G1 X23.108 Y32.263 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.937 Y32.263 E.03884 G1 X21.937 Y31.806 E.01518 G1 X21.663 Y31.674 E.01007 G2 X20.68 Y30.723 I-5.239 J4.43 E.04544 G1 X20.353 Y30.598 E.01163 G2 X19.043 Y30.942 I-.253 J1.705 E.04618 G3 X18.06 Y31.893 I-5.239 J-4.43 E.04544 G1 X17.732 Y32.018 E.01163 G3 X16.422 Y31.674 I-.253 J-1.705 E.04618 G2 X15.439 Y30.723 I-5.239 J4.43 E.04544 G1 X15.112 Y30.598 E.01163 G2 X13.801 Y30.942 I-.253 J1.705 E.04618 G3 X12.819 Y31.893 I-5.239 J-4.43 E.04544 G1 X12.491 Y32.018 E.01163 G3 X11.181 Y31.674 I-.253 J-1.705 E.04618 G2 X10.198 Y30.723 I-5.239 J4.43 E.04544 G1 X9.87 Y30.598 E.01163 G2 X8.56 Y30.942 I-.253 J1.705 E.04618 G3 X7.577 Y31.893 I-5.239 J-4.43 E.04544 G1 X7.25 Y32.018 E.01163 G3 X5.939 Y31.674 I-.253 J-1.705 E.04618 G2 X4.963 Y30.729 I-5.208 J4.4 E.04516 G1 X4.963 Y28.666 E.06843 G2 X5.939 Y29.397 I1.771 J-1.347 E.04099 G2 X7.25 Y29.053 I.253 J-1.705 E.04618 G3 X8.232 Y28.102 I5.239 J4.43 E.04544 G1 X8.56 Y27.978 E.01163 G3 X9.87 Y28.321 I.253 J1.705 E.04618 G2 X10.853 Y29.272 I5.239 J-4.43 E.04544 G1 X11.181 Y29.397 E.01163 G2 X12.491 Y29.053 I.253 J-1.705 E.04618 G3 X13.474 Y28.102 I5.239 J4.43 E.04544 G1 X13.801 Y27.978 E.01163 G3 X15.112 Y28.321 I.253 J1.705 E.04618 G2 X16.094 Y29.272 I5.239 J-4.43 E.04544 G1 X16.422 Y29.397 E.01163 G2 X17.732 Y29.053 I.253 J-1.705 E.04618 G3 X18.715 Y28.102 I5.239 J4.43 E.04544 G1 X19.043 Y27.978 E.01163 G3 X20.353 Y28.321 I.253 J1.705 E.04618 G2 X21.336 Y29.272 I5.239 J-4.43 E.04544 G2 X21.937 Y29.385 I.431 J-.64 E.02086 G1 X21.937 Y27.757 E.05401 G1 X3.667 Y34.263 F30000 G1 F16200 G1 X2.039 Y34.263 E.05401 G1 X1.353 Y34.61 E.02549 G3 X.073 Y34.263 I-.361 J-1.204 E.04634 G1 X-3.202 Y34.263 E.10865 G1 X-3.888 Y34.61 E.02549 G3 X-5.168 Y34.263 I-.361 J-1.204 E.04634 G1 X-8.444 Y34.263 E.10865 G1 X-9.129 Y34.61 E.02549 G3 X-10.41 Y34.263 I-.361 J-1.204 E.04634 G1 X-13.685 Y34.263 E.10865 G1 X-14.371 Y34.61 E.02549 G3 X-15.651 Y34.263 I-.361 J-1.204 E.04634 G1 X-18.926 Y34.263 E.10865 G1 X-19.612 Y34.61 E.02549 G3 X-20.892 Y34.263 I-.361 J-1.204 E.04634 G1 X-24.168 Y34.263 E.10865 G3 X-25.509 Y34.638 I-1.087 J-1.299 E.0476 G1 X-25.836 Y34.514 E.01163 G3 X-26.819 Y33.563 I4.256 J-5.381 E.04544 G2 X-28.129 Y33.219 I-1.057 J1.361 E.04618 G1 X-28.457 Y33.344 E.01163 G2 X-29.44 Y34.295 I4.256 J5.381 E.04544 G3 X-30.75 Y34.638 I-1.057 J-1.361 E.04618 G1 X-31.077 Y34.514 E.01163 G3 X-32.06 Y33.563 I4.256 J-5.381 E.04544 G2 X-33.37 Y33.219 I-1.057 J1.361 E.04618 G1 X-33.698 Y33.344 E.01163 G2 X-34.681 Y34.295 I4.256 J5.381 E.04544 G3 X-35.991 Y34.638 I-1.057 J-1.361 E.04618 G1 X-36.319 Y34.514 E.01163 G3 X-37.301 Y33.563 I4.256 J-5.381 E.04544 G2 X-38.612 Y33.219 I-1.057 J1.361 E.04618 G1 X-38.939 Y33.344 E.01163 G2 X-39.922 Y34.295 I4.256 J5.381 E.04544 G3 X-41.232 Y34.638 I-1.057 J-1.361 E.04618 G1 X-41.56 Y34.514 E.01163 G3 X-42.543 Y33.563 I4.256 J-5.381 E.04544 G2 X-43.853 Y33.219 I-1.057 J1.361 E.04618 G1 X-44.181 Y33.344 E.01163 G2 X-45.163 Y34.295 I4.256 J5.381 E.04544 G3 X-46.474 Y34.638 I-1.057 J-1.361 E.04618 G1 X-46.801 Y34.514 E.01163 G3 X-47.784 Y33.563 I4.256 J-5.381 E.04544 G1 X-48.537 Y33.244 E.02712 G1 X-48.537 Y35.915 E.08863 G1 X-47.784 Y35.84 E.0251 G1 X-47.457 Y35.964 E.01163 G3 X-46.474 Y36.915 I-4.256 J5.381 E.04544 G2 X-45.163 Y37.259 I1.057 J-1.361 E.04618 G1 X-44.836 Y37.134 E.01163 G2 X-43.853 Y36.183 I-4.256 J-5.381 E.04544 G3 X-42.543 Y35.84 I1.057 J1.361 E.04618 G1 X-42.215 Y35.964 E.01163 G3 X-41.232 Y36.915 I-4.256 J5.381 E.04544 G2 X-39.922 Y37.259 I1.057 J-1.361 E.04618 G1 X-39.595 Y37.134 E.01163 G2 X-38.612 Y36.183 I-4.256 J-5.381 E.04544 G3 X-37.301 Y35.84 I1.057 J1.361 E.04618 G1 X-36.974 Y35.964 E.01163 G3 X-35.991 Y36.915 I-4.256 J5.381 E.04544 G2 X-34.681 Y37.259 I1.057 J-1.361 E.04618 G1 X-34.353 Y37.134 E.01163 G2 X-33.37 Y36.183 I-4.256 J-5.381 E.04544 G3 X-32.06 Y35.84 I1.057 J1.361 E.04618 G1 X-31.733 Y35.964 E.01163 G3 X-30.75 Y36.915 I-4.256 J5.381 E.04544 G2 X-29.44 Y37.259 I1.057 J-1.361 E.04618 G1 X-29.112 Y37.134 E.01163 G2 X-28.129 Y36.183 I-4.256 J-5.381 E.04544 G3 X-26.819 Y35.84 I1.057 J1.361 E.04618 G1 X-26.491 Y35.964 E.01163 G3 X-25.509 Y36.915 I-4.256 J5.381 E.04544 G2 X-24.198 Y37.259 I1.057 J-1.361 E.04618 G1 X-23.871 Y37.134 E.01163 G2 X-22.888 Y36.183 I-4.256 J-5.381 E.04544 G3 X-21.578 Y35.84 I1.057 J1.361 E.04618 G1 X-21.25 Y35.964 E.01163 G3 X-20.267 Y36.915 I-4.256 J5.381 E.04544 G2 X-18.957 Y37.259 I1.057 J-1.361 E.04618 G1 X-18.629 Y37.134 E.01163 G2 X-17.647 Y36.183 I-4.256 J-5.381 E.04544 G3 X-16.336 Y35.84 I1.057 J1.361 E.04618 G1 X-16.009 Y35.964 E.01163 G3 X-15.026 Y36.915 I-4.256 J5.381 E.04544 G2 X-13.716 Y37.259 I1.057 J-1.361 E.04618 G1 X-13.388 Y37.134 E.01163 G2 X-12.405 Y36.183 I-4.256 J-5.381 E.04544 G3 X-11.095 Y35.84 I1.057 J1.361 E.04618 G1 X-10.767 Y35.964 E.01163 G3 X-9.785 Y36.915 I-4.256 J5.381 E.04544 G2 X-8.474 Y37.259 I1.057 J-1.361 E.04618 G1 X-8.147 Y37.134 E.01163 G2 X-7.164 Y36.183 I-4.256 J-5.381 E.04544 G3 X-5.854 Y35.84 I1.057 J1.361 E.04618 G1 X-5.526 Y35.964 E.01163 G3 X-4.543 Y36.915 I-4.256 J5.381 E.04544 G2 X-3.233 Y37.259 I1.057 J-1.361 E.04618 G1 X-2.905 Y37.134 E.01163 G2 X-1.923 Y36.183 I-4.256 J-5.381 E.04544 G3 X-.612 Y35.84 I1.057 J1.361 E.04618 G1 X-.285 Y35.964 E.01163 G3 X.698 Y36.915 I-4.256 J5.381 E.04544 G2 X2.008 Y37.259 I1.057 J-1.361 E.04618 G1 X2.336 Y37.134 E.01163 G2 X3.319 Y36.183 I-4.256 J-5.381 E.04544 G3 X4.629 Y35.84 I1.057 J1.361 E.04618 G1 X4.957 Y35.964 E.01163 G3 X5.939 Y36.915 I-4.256 J5.381 E.04544 G2 X7.25 Y37.259 I1.057 J-1.361 E.04618 G1 X7.577 Y37.134 E.01163 G2 X8.56 Y36.183 I-4.256 J-5.381 E.04544 G3 X9.87 Y35.84 I1.057 J1.361 E.04618 G1 X10.198 Y35.964 E.01163 G3 X11.181 Y36.915 I-4.256 J5.381 E.04544 G2 X12.491 Y37.259 I1.057 J-1.361 E.04618 G1 X12.819 Y37.134 E.01163 G2 X13.801 Y36.183 I-4.256 J-5.381 E.04544 G3 X15.112 Y35.84 I1.057 J1.361 E.04618 G1 X15.439 Y35.964 E.01163 G3 X16.422 Y36.915 I-4.256 J5.381 E.04544 G2 X17.732 Y37.259 I1.057 J-1.361 E.04618 G1 X18.06 Y37.134 E.01163 G2 X19.043 Y36.183 I-4.256 J-5.381 E.04544 G3 X20.353 Y35.84 I1.057 J1.361 E.04618 G1 X20.68 Y35.964 E.01163 G3 X21.663 Y36.915 I-4.256 J5.381 E.04544 G2 X22.974 Y37.259 I1.057 J-1.361 E.04618 G1 X23.301 Y37.134 E.01163 G2 X24.284 Y36.183 I-4.256 J-5.381 E.04544 G3 X25.594 Y35.84 I1.057 J1.361 E.04618 G1 X25.922 Y35.964 E.01163 G3 X26.905 Y36.915 I-4.256 J5.381 E.04544 G1 X27.56 Y37.23 E.02411 G1 X27.937 Y37.247 E.01252 G1 X27.937 Y34.428 E.0935 G1 X27.56 Y34.61 E.01388 G1 X26.905 Y34.638 E.02175 G1 X26.577 Y34.514 E.01163 G3 X25.594 Y33.563 I4.256 J-5.381 E.04544 G2 X24.284 Y33.219 I-1.057 J1.361 E.04618 G1 X23.956 Y33.344 E.01163 G2 X22.974 Y34.295 I4.256 J5.381 E.04544 G3 X21.663 Y34.638 I-1.057 J-1.361 E.04618 G1 X21.336 Y34.514 E.01163 G3 X20.353 Y33.563 I4.256 J-5.381 E.04544 G2 X19.043 Y33.219 I-1.057 J1.361 E.04618 G1 X18.715 Y33.344 E.01163 G2 X17.732 Y34.295 I4.256 J5.381 E.04544 G3 X16.422 Y34.638 I-1.057 J-1.361 E.04618 G1 X16.094 Y34.514 E.01163 G3 X15.112 Y33.563 I4.256 J-5.381 E.04544 G2 X13.801 Y33.219 I-1.057 J1.361 E.04618 G1 X13.474 Y33.344 E.01163 G2 X12.491 Y34.295 I4.256 J5.381 E.04544 G3 X11.181 Y34.638 I-1.057 J-1.361 E.04618 G1 X10.853 Y34.514 E.01163 G3 X9.87 Y33.563 I4.256 J-5.381 E.04544 G2 X8.56 Y33.219 I-1.057 J1.361 E.04618 G1 X8.232 Y33.344 E.01163 G2 X7.25 Y34.295 I4.256 J5.381 E.04544 G3 X5.939 Y34.638 I-1.057 J-1.361 E.04618 G3 X4.963 Y33.907 I.795 J-2.078 E.04099 G1 X4.963 Y34.263 E.01182 G1 X3.691 Y34.263 E.0422 G1 X4.963 Y27.116 F30000 G1 F16200 G1 X4.963 Y25.487 E.05401 G3 X5.939 Y26.433 I-4.232 J5.346 E.04516 G2 X7.25 Y26.776 I1.057 J-1.361 E.04618 G1 X7.577 Y26.652 E.01163 G2 X8.56 Y25.701 I-4.256 J-5.381 E.04544 G3 X9.87 Y25.357 I1.057 J1.361 E.04618 G1 X10.198 Y25.482 E.01163 G3 X11.181 Y26.433 I-4.257 J5.381 E.04544 G2 X12.491 Y26.776 I1.057 J-1.361 E.04618 G1 X12.819 Y26.652 E.01163 G2 X13.801 Y25.701 I-4.256 J-5.381 E.04544 G3 X15.112 Y25.357 I1.057 J1.361 E.04618 G1 X15.439 Y25.482 E.01163 G3 X16.422 Y26.433 I-4.256 J5.381 E.04544 G2 X17.732 Y26.776 I1.057 J-1.361 E.04618 G1 X18.06 Y26.652 E.01163 G2 X19.043 Y25.701 I-4.256 J-5.381 E.04544 G3 X20.353 Y25.357 I1.057 J1.361 E.04618 G1 X20.68 Y25.482 E.01163 G3 X21.663 Y26.433 I-4.256 J5.381 E.04544 G1 X21.937 Y26.564 E.01007 G1 X21.937 Y24.144 E.08029 G3 X21.336 Y24.031 I-.17 J-.753 E.02086 G3 X20.353 Y23.08 I4.257 J-5.381 E.04544 G2 X19.043 Y22.736 I-1.057 J1.361 E.04618 G1 X18.715 Y22.861 E.01163 G2 X17.732 Y23.812 I4.256 J5.381 E.04544 G3 X16.422 Y24.156 I-1.057 J-1.361 E.04618 G1 X16.094 Y24.031 E.01163 G3 X15.112 Y23.08 I4.257 J-5.381 E.04544 G2 X13.801 Y22.736 I-1.057 J1.361 E.04618 G1 X13.474 Y22.861 E.01163 G2 X12.491 Y23.812 I4.256 J5.381 E.04544 G3 X11.181 Y24.156 I-1.057 J-1.361 E.04618 G1 X10.853 Y24.031 E.01163 G3 X9.87 Y23.08 I4.256 J-5.381 E.04544 G2 X8.56 Y22.736 I-1.057 J1.361 E.04618 G1 X8.232 Y22.861 E.01163 G2 X7.25 Y23.812 I4.256 J5.381 E.04544 G3 X5.939 Y24.156 I-1.057 J-1.361 E.04618 G1 X5.612 Y24.031 E.01163 G3 X4.629 Y23.08 I4.256 J-5.381 E.04544 G2 X3.319 Y22.736 I-1.057 J1.361 E.04618 G2 X2.081 Y23.737 I1.064 J2.581 E.05352 G1 X.025 Y23.737 E.06821 G1 X-.612 Y23.08 E.03036 G2 X-1.923 Y22.736 I-1.057 J1.361 E.04618 G2 X-3.16 Y23.737 I1.064 J2.581 E.05352 G1 X-5.216 Y23.737 E.06821 G1 X-5.854 Y23.08 E.03036 G2 X-7.164 Y22.736 I-1.057 J1.361 E.04618 G2 X-8.401 Y23.737 I1.064 J2.581 E.05352 G1 X-10.457 Y23.737 E.06821 G1 X-11.095 Y23.08 E.03036 G2 X-12.405 Y22.736 I-1.057 J1.361 E.04618 G2 X-13.643 Y23.737 I1.064 J2.581 E.05352 G1 X-15.699 Y23.737 E.06821 G1 X-16.336 Y23.08 E.03036 G2 X-17.647 Y22.736 I-1.057 J1.361 E.04618 G2 X-18.884 Y23.737 I1.064 J2.581 E.05352 G1 X-20.94 Y23.737 E.06821 G1 X-21.578 Y23.08 E.03036 G2 X-22.888 Y22.736 I-1.057 J1.361 E.04618 G2 X-24.125 Y23.737 I1.064 J2.581 E.05352 G1 X-25.563 Y23.737 E.0477 G1 X-25.563 Y24.135 E.01321 G1 X-25.836 Y24.031 E.00969 G3 X-26.819 Y23.08 I4.256 J-5.381 E.04544 G2 X-28.129 Y22.736 I-1.057 J1.361 E.04618 G1 X-28.457 Y22.861 E.01163 G2 X-29.44 Y23.812 I4.256 J5.381 E.04544 G3 X-30.75 Y24.156 I-1.057 J-1.361 E.04618 G1 X-31.077 Y24.031 E.01163 G3 X-32.06 Y23.08 I4.256 J-5.381 E.04544 G2 X-33.37 Y22.736 I-1.057 J1.361 E.04618 G1 X-33.698 Y22.861 E.01163 G2 X-34.681 Y23.812 I4.256 J5.381 E.04544 G3 X-35.991 Y24.156 I-1.057 J-1.361 E.04618 G1 X-36.319 Y24.031 E.01163 G3 X-37.301 Y23.08 I4.257 J-5.381 E.04544 G2 X-38.612 Y22.736 I-1.057 J1.361 E.04618 G1 X-38.939 Y22.861 E.01163 G2 X-39.922 Y23.812 I4.256 J5.381 E.04544 G3 X-41.232 Y24.156 I-1.057 J-1.361 E.04618 G1 X-41.56 Y24.031 E.01163 G3 X-42.537 Y23.086 I4.229 J-5.349 E.04516 G1 X-42.537 Y25.359 E.0754 G1 X-42.215 Y25.482 E.01142 G3 X-41.232 Y26.433 I-4.256 J5.381 E.04544 G2 X-39.922 Y26.776 I1.057 J-1.361 E.04618 G1 X-39.595 Y26.652 E.01163 G2 X-38.612 Y25.701 I-4.256 J-5.381 E.04544 G3 X-37.301 Y25.357 I1.057 J1.361 E.04618 G1 X-36.974 Y25.482 E.01163 G3 X-35.991 Y26.433 I-4.256 J5.381 E.04544 G2 X-34.681 Y26.776 I1.057 J-1.361 E.04618 G1 X-34.353 Y26.652 E.01163 G2 X-33.37 Y25.701 I-4.256 J-5.381 E.04544 G3 X-32.06 Y25.357 I1.057 J1.361 E.04618 G1 X-31.733 Y25.482 E.01163 G3 X-30.75 Y26.433 I-4.257 J5.381 E.04544 G2 X-29.44 Y26.776 I1.057 J-1.361 E.04618 G1 X-29.112 Y26.652 E.01163 G2 X-28.129 Y25.701 I-4.256 J-5.381 E.04544 G3 X-26.819 Y25.357 I1.057 J1.361 E.04618 G1 X-26.491 Y25.482 E.01163 G3 X-25.563 Y26.377 I-4.003 J5.081 E.04284 G1 X-25.563 Y28.005 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-25.563 Y26.377 G1 X-25.831 Y26.119 ;WIPE_END G1 X-21.051 Y20.168 Z2 F30000 G1 X-16.308 Y14.263 Z2 G1 Z1.6 G1 E.8 F1800 G1 F16200 G1 X-16.037 Y14.263 E.00899 G1 X-16.037 Y12.906 E.04502 G2 X-15.354 Y13.549 I3.55 J-3.09 E.03117 G2 X-13.716 Y13.33 I.614 J-1.645 E.05707 G3 X-12.733 Y12.378 I5.239 J4.43 E.04544 G3 X-11.095 Y12.597 I.614 J1.645 E.05707 G2 X-10.112 Y13.549 I5.239 J-4.43 E.04544 G2 X-8.474 Y13.33 I.614 J-1.645 E.05707 G3 X-7.492 Y12.378 I5.239 J4.43 E.04544 G3 X-5.854 Y12.597 I.614 J1.645 E.05707 G1 X-5.198 Y13.272 E.0312 G2 X-4.563 Y13.666 I.879 J-.71 E.02526 G1 X-4.563 Y10.688 E.09876 G2 X-5.526 Y9.758 I-5.127 J4.341 E.0445 G2 X-7.164 Y9.977 I-.614 J1.645 E.05707 G3 X-8.147 Y10.928 I-5.239 J-4.43 E.04544 G3 X-9.785 Y10.709 I-.614 J-1.645 E.05707 G2 X-10.767 Y9.758 I-5.239 J4.43 E.04544 G2 X-12.405 Y9.977 I-.614 J1.645 E.05707 G3 X-13.388 Y10.928 I-5.239 J-4.43 E.04544 G3 X-15.026 Y10.709 I-.614 J-1.645 E.05707 G2 X-16.037 Y9.747 I-4.415 J3.628 E.0464 G1 X-16.037 Y7.665 E.06908 G2 X-15.354 Y8.307 I3.55 J-3.09 E.03117 G2 X-13.716 Y8.088 I.614 J-1.645 E.05707 G3 X-12.733 Y7.137 I5.239 J4.43 E.04544 G3 X-11.095 Y7.356 I.614 J1.645 E.05707 G2 X-10.112 Y8.307 I5.239 J-4.43 E.04544 G2 X-8.474 Y8.088 I.614 J-1.645 E.05707 G3 X-7.492 Y7.137 I5.239 J4.43 E.04544 G3 X-5.854 Y7.356 I.614 J1.645 E.05707 G1 X-5.198 Y8.031 E.0312 G2 X-4.563 Y8.424 I.879 J-.71 E.02526 G1 X-4.563 Y5.447 E.09876 G2 X-5.526 Y4.516 I-5.127 J4.341 E.0445 G2 X-7.164 Y4.736 I-.614 J1.645 E.05707 G3 X-8.147 Y5.687 I-5.239 J-4.43 E.04544 G3 X-9.785 Y5.468 I-.614 J-1.645 E.05707 G2 X-10.767 Y4.516 I-5.239 J4.43 E.04544 G2 X-12.405 Y4.736 I-.614 J1.645 E.05707 G3 X-13.388 Y5.687 I-5.239 J-4.43 E.04544 G3 X-15.026 Y5.468 I-.614 J-1.645 E.05707 G2 X-16.037 Y4.506 I-4.415 J3.628 E.0464 G1 X-16.037 Y2.423 E.06908 G2 X-15.354 Y3.066 I3.55 J-3.09 E.03117 G2 X-13.716 Y2.847 I.614 J-1.645 E.05707 G3 X-12.733 Y1.896 I5.239 J4.43 E.04544 G3 X-11.095 Y2.115 I.614 J1.645 E.05707 G2 X-10.112 Y3.066 I5.239 J-4.43 E.04544 G2 X-8.474 Y2.847 I.614 J-1.645 E.05707 G3 X-7.492 Y1.896 I5.239 J4.43 E.04544 G3 X-5.854 Y2.115 I.614 J1.645 E.05707 G1 X-5.198 Y2.79 E.0312 G2 X-4.563 Y3.183 I.879 J-.71 E.02526 G1 X-4.563 Y.206 E.09876 G2 X-5.526 Y-.725 I-5.127 J4.341 E.0445 G2 X-7.164 Y-.506 I-.614 J1.645 E.05707 G3 X-8.147 Y.445 I-5.239 J-4.43 E.04544 G3 X-9.785 Y.226 I-.614 J-1.645 E.05707 G2 X-10.767 Y-.725 I-5.239 J4.43 E.04544 G2 X-12.405 Y-.506 I-.614 J1.645 E.05707 G3 X-13.388 Y.445 I-5.239 J-4.43 E.04544 G3 X-15.026 Y.226 I-.614 J-1.645 E.05707 G2 X-16.037 Y-.736 I-4.415 J3.628 E.0464 G1 X-16.037 Y-2.263 E.05067 G1 X-16.138 Y-2.263 E.00334 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-16.037 Y-2.263 G1 X-16.037 Y-.736 G1 X-15.768 Y-.479 ;WIPE_END G1 X-23.398 Y-.659 Z2 F30000 G1 X-49.135 Y-1.264 Z2 G1 Z1.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.409517 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385478 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342223 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305489 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275113 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276404 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307218 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344555 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.39396 G2 X-49.135 Y1.264 I8.186 J-1.36 E.0117 G1 X-47.775 Y3.088 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-45.819 Y3.162 I1.159 J-4.731 E.06541 G2 X-44.176 Y1.894 I-1.61 J-3.784 E.06957 G3 X-42.543 Y2.115 I.609 J1.647 E.05691 G2 X-41.56 Y3.066 I5.239 J-4.43 E.04544 G2 X-39.922 Y2.847 I.614 J-1.645 E.05707 G3 X-38.939 Y1.896 I5.239 J4.43 E.04544 G3 X-37.301 Y2.115 I.614 J1.645 E.05707 G2 X-36.319 Y3.066 I5.239 J-4.43 E.04544 G2 X-34.681 Y2.847 I.614 J-1.645 E.05707 G3 X-33.698 Y1.896 I5.239 J4.43 E.04544 G3 X-32.06 Y2.115 I.614 J1.645 E.05707 G2 X-31.256 Y2.915 I4.398 J-3.613 E.0377 G2 X-32.789 Y4.456 I1.124 J2.651 E.07392 G1 X-33.37 Y4.736 E.02141 G3 X-34.353 Y5.687 I-5.239 J-4.43 E.04544 G3 X-35.991 Y5.468 I-.614 J-1.645 E.05707 G2 X-36.974 Y4.516 I-5.239 J4.43 E.04544 G2 X-38.612 Y4.736 I-.614 J1.645 E.05707 G3 X-39.595 Y5.687 I-5.239 J-4.43 E.04544 G3 X-41.232 Y5.468 I-.614 J-1.645 E.05707 G2 X-42.215 Y4.516 I-5.239 J4.43 E.04544 G2 X-43.853 Y4.736 I-.614 J1.645 E.05707 G3 X-44.836 Y5.687 I-5.239 J-4.43 E.04544 G3 X-46.474 Y5.468 I-.614 J-1.645 E.05707 G1 X-47.129 Y4.793 E.0312 G2 X-47.784 Y4.392 I-.9 J.735 E.02597 G1 X-48.537 Y4.468 E.0251 G1 X-48.537 Y7.037 E.08523 G1 X-47.784 Y7.356 E.02712 G2 X-46.801 Y8.307 I5.239 J-4.43 E.04544 G2 X-45.163 Y8.088 I.614 J-1.645 E.05707 G3 X-44.181 Y7.137 I5.239 J4.43 E.04544 G3 X-42.543 Y7.356 I.614 J1.645 E.05707 G2 X-41.56 Y8.307 I5.239 J-4.43 E.04544 G2 X-39.922 Y8.088 I.614 J-1.645 E.05707 G3 X-38.939 Y7.137 I5.239 J4.43 E.04544 G3 X-37.301 Y7.356 I.614 J1.645 E.05707 G2 X-36.319 Y8.307 I5.239 J-4.43 E.04544 G2 X-34.681 Y8.088 I.614 J-1.645 E.05707 G1 X-34.026 Y7.413 E.0312 G3 X-32.157 Y7.31 I.993 J1.004 E.06787 G2 X-31.077 Y8.307 I32.476 J-34.06 E.04876 G2 X-29.44 Y8.088 I.614 J-1.645 E.05707 G1 X-29.363 Y8.01 E.00364 G1 X-29.363 Y9.638 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-29.363 Y8.01 G1 X-29.44 Y8.088 G1 X-29.676 Y8.202 ;WIPE_END G1 X-29.363 Y2.169 Z2 F30000 G1 Z1.6 G1 E.8 F1800 G1 F16200 G1 X-29.363 Y.541 E.05401 G3 X-30.75 Y.226 I-.275 J-2.002 E.0482 G2 X-31.733 Y-.725 I-5.239 J4.43 E.04544 G2 X-33.37 Y-.506 I-.614 J1.645 E.05707 G3 X-34.353 Y.445 I-5.239 J-4.43 E.04544 G3 X-35.991 Y.226 I-.614 J-1.645 E.05707 G2 X-36.974 Y-.725 I-5.239 J4.43 E.04544 G2 X-38.612 Y-.506 I-.614 J1.645 E.05707 G3 X-39.595 Y.445 I-5.239 J-4.43 E.04544 G3 X-41.232 Y.226 I-.614 J-1.645 E.05707 G1 X-41.888 Y-.449 E.0312 G2 X-43.62 Y-.618 I-.962 J.895 E.06313 G2 X-44.926 Y-2.639 I-3.202 J.636 E.08175 G3 X-44.181 Y-3.346 I3.9 J3.368 E.03413 G3 X-42.543 Y-3.126 I.614 J1.645 E.05707 G2 X-41.56 Y-2.175 I5.239 J-4.43 E.04544 G2 X-39.922 Y-2.394 I.614 J-1.645 E.05707 G3 X-38.939 Y-3.346 I5.239 J4.43 E.04544 G3 X-37.301 Y-3.126 I.614 J1.645 E.05707 G2 X-36.319 Y-2.175 I5.239 J-4.43 E.04544 G2 X-34.681 Y-2.394 I.614 J-1.645 E.05707 G3 X-33.698 Y-3.346 I5.239 J4.43 E.04544 G3 X-32.06 Y-3.126 I.614 J1.645 E.05707 G2 X-31.077 Y-2.175 I5.239 J-4.43 E.04544 G2 X-29.44 Y-2.394 I.614 J-1.645 E.05707 G3 X-28.457 Y-3.346 I5.239 J4.43 E.04544 G3 X-26.819 Y-3.126 I.614 J1.645 E.05707 G2 X-25.94 Y-2.263 I4.749 J-3.954 E.04093 G1 X-24.471 Y-2.263 E.04872 G1 X-24.198 Y-2.394 E.01006 G3 X-23.215 Y-3.346 I5.239 J4.43 E.04544 G3 X-21.578 Y-3.126 I.614 J1.645 E.05707 G2 X-20.699 Y-2.263 I4.749 J-3.954 E.04093 G1 X-19.23 Y-2.263 E.04872 G1 X-18.957 Y-2.394 E.01006 G3 X-17.974 Y-3.346 I5.239 J4.43 E.04544 G3 X-16.336 Y-3.126 I.614 J1.645 E.05707 G2 X-15.354 Y-2.175 I5.239 J-4.43 E.04544 G2 X-13.716 Y-2.394 I.614 J-1.645 E.05707 G3 X-12.733 Y-3.346 I5.239 J4.43 E.04544 G3 X-11.095 Y-3.126 I.614 J1.645 E.05707 G2 X-10.112 Y-2.175 I5.239 J-4.43 E.04544 G2 X-8.474 Y-2.394 I.614 J-1.645 E.05707 G3 X-7.492 Y-3.346 I5.239 J4.43 E.04544 G3 X-5.854 Y-3.126 I.614 J1.645 E.05707 G1 X-5.198 Y-2.452 E.0312 G2 X-4.563 Y-2.058 I.879 J-.71 E.02526 G1 X-4.563 Y-2.263 E.0068 G1 X-3.506 Y-2.263 E.03506 G1 X-3.233 Y-2.394 E.01006 G3 X-2.25 Y-3.346 I5.239 J4.43 E.04544 G3 X-.612 Y-3.126 I.614 J1.645 E.05707 G2 X.266 Y-2.263 I4.749 J-3.954 E.04093 G1 X1.735 Y-2.263 E.04872 G1 X2.008 Y-2.394 E.01006 G3 X2.991 Y-3.346 I5.239 J4.43 E.04544 G3 X4.629 Y-3.126 I.614 J1.645 E.05707 G2 X5.508 Y-2.263 I4.749 J-3.954 E.04093 G1 X6.976 Y-2.263 E.04872 G1 X7.25 Y-2.394 E.01006 G3 X8.232 Y-3.346 I5.239 J4.43 E.04544 G3 X9.87 Y-3.126 I.614 J1.645 E.05707 G2 X10.853 Y-2.175 I5.239 J-4.43 E.04544 G2 X12.491 Y-2.394 I.614 J-1.645 E.05707 G3 X13.474 Y-3.346 I5.239 J4.43 E.04544 G3 X15.112 Y-3.126 I.614 J1.645 E.05707 G2 X16.094 Y-2.175 I5.239 J-4.43 E.04544 G2 X17.732 Y-2.394 I.614 J-1.645 E.05707 G3 X18.715 Y-3.346 I5.239 J4.43 E.04544 G3 X20.353 Y-3.126 I.614 J1.645 E.05707 G2 X21.336 Y-2.175 I5.239 J-4.43 E.04544 G2 X22.974 Y-2.394 I.614 J-1.645 E.05707 G1 X23.629 Y-3.069 E.0312 G3 X25.516 Y-3.164 I.997 J1.019 E.06851 G3 X27.937 Y-2.731 I.68 J3.183 E.08367 G1 X27.937 Y-4.684 E.06476 G3 X27.483 Y-4.737 I-.164 J-.557 E.01556 G1 X23.146 Y-4.737 E.14389 G1 X22.974 Y-4.671 E.00611 G1 X22.242 Y-4.737 E.02436 G1 X20.614 Y-4.737 E.05401 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393961 G1 F12000 G3 X28.611 Y-.863 I-8.092 J1.758 E.0117 ;WIDTH:0.344557 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.30722 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385479 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409518 G1 X28.535 Y1.264 E.00864 G1 X27.937 Y4.609 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X27.937 Y2.98 E.05401 G1 X27.56 Y3.162 E.01388 G1 X26.905 Y3.191 E.02175 G3 X25.245 Y3.095 I-.57 J-4.561 E.05544 G1 X27.937 Y9.412 F30000 G1 F16200 G1 X27.937 Y11.04 E.05401 G1 X27.56 Y11.024 E.01252 G1 X26.905 Y10.709 E.02411 G2 X25.922 Y9.758 I-5.239 J4.43 E.04544 G1 X25.594 Y9.633 E.01163 G2 X24.284 Y9.977 I-.253 J1.705 E.04618 G3 X23.301 Y10.928 I-5.239 J-4.43 E.04544 G1 X22.974 Y11.053 E.01163 G3 X21.663 Y10.709 I-.253 J-1.705 E.04618 G2 X20.68 Y9.758 I-5.239 J4.43 E.04544 G1 X20.353 Y9.633 E.01163 G2 X19.043 Y9.977 I-.253 J1.705 E.04618 G3 X18.06 Y10.928 I-5.239 J-4.43 E.04544 G1 X17.732 Y11.053 E.01163 G3 X16.422 Y10.709 I-.253 J-1.705 E.04618 G2 X15.439 Y9.758 I-5.239 J4.43 E.04544 G1 X15.112 Y9.633 E.01163 G2 X13.801 Y9.977 I-.253 J1.705 E.04618 G3 X12.819 Y10.928 I-5.239 J-4.43 E.04544 G1 X12.491 Y11.053 E.01163 G3 X11.181 Y10.709 I-.253 J-1.705 E.04618 G2 X10.198 Y9.758 I-5.239 J4.43 E.04544 G1 X9.87 Y9.633 E.01163 G2 X8.763 Y9.879 I-.266 J1.418 E.03866 G1 X8.763 Y12.263 E.07907 G1 X9.215 Y12.283 E.01501 G1 X9.87 Y12.597 E.02411 G2 X10.853 Y13.549 I5.239 J-4.43 E.04544 G1 X11.181 Y13.673 E.01163 G2 X12.491 Y13.33 I.253 J-1.705 E.04618 G3 X13.474 Y12.378 I5.239 J4.43 E.04544 G1 X13.801 Y12.254 E.01163 G3 X15.112 Y12.597 I.253 J1.705 E.04618 G2 X16.094 Y13.549 I5.239 J-4.43 E.04544 G1 X16.422 Y13.673 E.01163 G2 X17.732 Y13.33 I.253 J-1.705 E.04618 G3 X18.715 Y12.378 I5.239 J4.43 E.04544 G1 X19.043 Y12.254 E.01163 G3 X20.353 Y12.597 I.253 J1.705 E.04618 G2 X21.336 Y13.549 I5.239 J-4.43 E.04544 G1 X21.663 Y13.673 E.01163 G2 X22.974 Y13.33 I.253 J-1.705 E.04618 G3 X23.956 Y12.378 I5.239 J4.43 E.04544 G1 X24.284 Y12.254 E.01163 G3 X25.594 Y12.597 I.253 J1.705 E.04618 G2 X26.577 Y13.549 I5.239 J-4.43 E.04544 G1 X26.905 Y13.673 E.01163 G1 X27.56 Y13.644 E.02175 G1 X27.937 Y13.463 E.01388 G1 X27.937 Y16.282 E.0935 G1 X27.56 Y16.265 E.01252 G1 X26.905 Y15.95 E.02411 G2 X25.922 Y14.999 I-5.239 J4.43 E.04544 G1 X25.594 Y14.874 E.01163 G2 X24.284 Y15.218 I-.253 J1.705 E.04618 G3 X23.301 Y16.169 I-5.239 J-4.43 E.04544 G1 X22.974 Y16.294 E.01163 G3 X21.663 Y15.95 I-.253 J-1.705 E.04618 G2 X20.68 Y14.999 I-5.239 J4.43 E.04544 G1 X20.353 Y14.874 E.01163 G2 X19.043 Y15.218 I-.253 J1.705 E.04618 G3 X18.06 Y16.169 I-5.239 J-4.43 E.04544 G1 X17.732 Y16.294 E.01163 G3 X16.422 Y15.95 I-.253 J-1.705 E.04618 G2 X15.439 Y14.999 I-5.239 J4.43 E.04544 G1 X15.112 Y14.874 E.01163 G2 X13.801 Y15.218 I-.253 J1.705 E.04618 G3 X12.819 Y16.169 I-5.239 J-4.43 E.04544 G1 X12.491 Y16.294 E.01163 G3 X11.181 Y15.95 I-.253 J-1.705 E.04618 G2 X10.198 Y14.999 I-5.239 J4.43 E.04544 G1 X9.87 Y14.874 E.01163 G2 X8.56 Y15.218 I-.253 J1.705 E.04618 G3 X7.577 Y16.169 I-5.239 J-4.43 E.04544 G1 X7.25 Y16.294 E.01163 G3 X5.939 Y15.95 I-.253 J-1.705 E.04618 G2 X4.957 Y14.999 I-5.239 J4.43 E.04544 G1 X4.629 Y14.874 E.01163 G2 X3.319 Y15.218 I-.253 J1.705 E.04618 G3 X2.336 Y16.169 I-5.239 J-4.43 E.04544 G1 X2.008 Y16.294 E.01163 G3 X.698 Y15.95 I-.253 J-1.705 E.04618 G2 X-.285 Y14.999 I-5.239 J4.43 E.04544 G1 X-.612 Y14.874 E.01163 G2 X-1.923 Y15.218 I-.253 J1.705 E.04618 G3 X-2.905 Y16.169 I-5.239 J-4.43 E.04544 G1 X-3.233 Y16.294 E.01163 G3 X-4.543 Y15.95 I-.253 J-1.705 E.04618 G2 X-5.526 Y14.999 I-5.239 J4.43 E.04544 G1 X-5.854 Y14.874 E.01163 G2 X-7.164 Y15.218 I-.253 J1.705 E.04618 G3 X-8.147 Y16.169 I-5.239 J-4.43 E.04544 G1 X-8.474 Y16.294 E.01163 G3 X-9.785 Y15.95 I-.253 J-1.705 E.04618 G2 X-10.767 Y14.999 I-5.239 J4.43 E.04544 G1 X-11.095 Y14.874 E.01163 G2 X-12.405 Y15.218 I-.253 J1.705 E.04618 G3 X-13.388 Y16.169 I-5.239 J-4.43 E.04544 G1 X-13.716 Y16.294 E.01163 G3 X-15.026 Y15.95 I-.253 J-1.705 E.04618 G2 X-16.009 Y14.999 I-5.239 J4.43 E.04544 G1 X-16.336 Y14.874 E.01163 G2 X-17.647 Y15.218 I-.253 J1.705 E.04618 G3 X-18.629 Y16.169 I-5.239 J-4.43 E.04544 G1 X-18.957 Y16.294 E.01163 G3 X-20.267 Y15.95 I-.253 J-1.705 E.04618 G2 X-21.25 Y14.999 I-5.239 J4.43 E.04544 G1 X-21.578 Y14.874 E.01163 G2 X-22.888 Y15.218 I-.253 J1.705 E.04618 G3 X-23.871 Y16.169 I-5.239 J-4.43 E.04544 G1 X-24.198 Y16.294 E.01163 G3 X-25.509 Y15.95 I-.253 J-1.705 E.04618 G2 X-26.491 Y14.999 I-5.239 J4.43 E.04544 G1 X-26.819 Y14.874 E.01163 G2 X-28.129 Y15.218 I-.253 J1.705 E.04618 G3 X-29.112 Y16.169 I-5.239 J-4.43 E.04544 G1 X-29.44 Y16.294 E.01163 G3 X-30.75 Y15.95 I-.253 J-1.705 E.04618 G2 X-31.733 Y14.999 I-5.239 J4.43 E.04544 G1 X-32.06 Y14.874 E.01163 G2 X-33.37 Y15.218 I-.253 J1.705 E.04618 G3 X-34.353 Y16.169 I-5.239 J-4.43 E.04544 G1 X-34.681 Y16.294 E.01163 G3 X-35.991 Y15.95 I-.253 J-1.705 E.04618 G2 X-36.974 Y14.999 I-5.239 J4.43 E.04544 G1 X-37.301 Y14.874 E.01163 G2 X-38.612 Y15.218 I-.253 J1.705 E.04618 G3 X-39.595 Y16.169 I-5.239 J-4.43 E.04544 G1 X-39.922 Y16.294 E.01163 G3 X-41.232 Y15.95 I-.253 J-1.705 E.04618 G2 X-42.215 Y14.999 I-5.239 J4.43 E.04544 G1 X-42.543 Y14.874 E.01163 G2 X-43.853 Y15.218 I-.253 J1.705 E.04618 G3 X-44.836 Y16.169 I-5.239 J-4.43 E.04544 G1 X-45.163 Y16.294 E.01163 G3 X-46.474 Y15.95 I-.253 J-1.705 E.04618 G2 X-47.457 Y14.999 I-5.239 J4.43 E.04544 G1 X-47.784 Y14.874 E.01163 G1 X-48.537 Y14.95 E.0251 G1 X-48.537 Y12.278 E.08863 G1 X-47.784 Y12.597 E.02712 G2 X-46.801 Y13.549 I5.239 J-4.43 E.04544 G1 X-46.474 Y13.673 E.01163 G2 X-45.163 Y13.33 I.253 J-1.705 E.04618 G3 X-44.181 Y12.378 I5.239 J4.43 E.04544 G1 X-43.853 Y12.254 E.01163 G3 X-42.543 Y12.597 I.253 J1.705 E.04618 G2 X-41.56 Y13.549 I5.239 J-4.43 E.04544 G1 X-41.232 Y13.673 E.01163 G2 X-39.922 Y13.33 I.253 J-1.705 E.04618 G3 X-38.939 Y12.378 I5.239 J4.43 E.04544 G1 X-38.612 Y12.254 E.01163 G3 X-37.301 Y12.597 I.253 J1.705 E.04618 G2 X-36.319 Y13.549 I5.239 J-4.43 E.04544 G1 X-35.991 Y13.673 E.01163 G2 X-34.681 Y13.33 I.253 J-1.705 E.04618 G3 X-33.698 Y12.378 I5.239 J4.43 E.04544 G1 X-33.37 Y12.254 E.01163 G3 X-32.06 Y12.597 I.253 J1.705 E.04618 G2 X-31.077 Y13.549 I5.239 J-4.43 E.04544 G1 X-30.75 Y13.673 E.01163 G2 X-29.363 Y13.251 I.256 J-1.649 E.04974 G1 X-29.363 Y11.023 E.07388 G1 X-29.44 Y11.053 E.00271 G3 X-30.75 Y10.709 I-.253 J-1.705 E.04618 G2 X-31.733 Y9.758 I-5.239 J4.43 E.04544 G1 X-32.06 Y9.633 E.01163 G2 X-33.37 Y9.977 I-.253 J1.705 E.04618 G3 X-34.353 Y10.928 I-5.239 J-4.43 E.04544 G1 X-34.681 Y11.053 E.01163 G3 X-35.991 Y10.709 I-.253 J-1.705 E.04618 G2 X-36.974 Y9.758 I-5.239 J4.43 E.04544 G1 X-37.301 Y9.633 E.01163 G2 X-38.612 Y9.977 I-.253 J1.705 E.04618 G3 X-39.595 Y10.928 I-5.239 J-4.43 E.04544 G1 X-39.922 Y11.053 E.01163 G3 X-41.232 Y10.709 I-.253 J-1.705 E.04618 G2 X-42.215 Y9.758 I-5.239 J4.43 E.04544 G1 X-42.543 Y9.633 E.01163 G2 X-43.853 Y9.977 I-.253 J1.705 E.04618 G3 X-44.836 Y10.928 I-5.239 J-4.43 E.04544 G1 X-45.163 Y11.053 E.01163 G3 X-46.474 Y10.709 I-.253 J-1.705 E.04618 G2 X-47.457 Y9.758 I-5.239 J4.43 E.04544 G1 X-47.784 Y9.633 E.01163 G1 X-48.537 Y9.709 E.0251 G1 X-48.537 Y8.081 E.05401 G1 X-48.3 Y32.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y17.744 E.57795 G1 X-45.948 Y17.737 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-44.32 Y17.737 E.05401 G3 X-43.853 Y17.495 I.578 J.545 E.01777 G3 X-42.755 Y17.737 I.266 J1.406 E.03834 G1 X-42.537 Y17.737 E.00723 G1 X-42.537 Y17.845 E.00358 G2 X-41.56 Y18.79 I5.206 J-4.404 E.04516 G1 X-41.232 Y18.914 E.01163 G2 X-39.922 Y18.571 I.253 J-1.705 E.04618 G3 X-38.939 Y17.62 I5.239 J4.43 E.04544 G1 X-38.612 Y17.495 E.01163 G3 X-37.301 Y17.839 I.253 J1.705 E.04618 G2 X-36.319 Y18.79 I5.239 J-4.43 E.04544 G1 X-35.991 Y18.914 E.01163 G2 X-34.681 Y18.571 I.253 J-1.705 E.04618 G3 X-33.698 Y17.62 I5.239 J4.43 E.04544 G1 X-33.37 Y17.495 E.01163 G3 X-32.06 Y17.839 I.253 J1.705 E.04618 G2 X-31.077 Y18.79 I5.239 J-4.43 E.04544 G1 X-30.75 Y18.914 E.01163 G2 X-29.44 Y18.571 I.253 J-1.705 E.04618 G3 X-28.457 Y17.62 I5.239 J4.43 E.04544 G1 X-28.129 Y17.495 E.01163 G3 X-26.819 Y17.839 I.253 J1.705 E.04618 G2 X-25.836 Y18.79 I5.239 J-4.43 E.04544 G1 X-25.509 Y18.914 E.01163 G2 X-24.198 Y18.571 I.253 J-1.705 E.04618 G3 X-23.215 Y17.62 I5.239 J4.43 E.04544 G1 X-22.888 Y17.495 E.01163 G3 X-21.578 Y17.839 I.253 J1.705 E.04618 G2 X-20.595 Y18.79 I5.239 J-4.43 E.04544 G1 X-20.267 Y18.914 E.01163 G2 X-18.957 Y18.571 I.253 J-1.705 E.04618 G3 X-17.974 Y17.62 I5.239 J4.43 E.04544 G1 X-17.647 Y17.495 E.01163 G3 X-16.336 Y17.839 I.253 J1.705 E.04618 G2 X-15.354 Y18.79 I5.239 J-4.43 E.04544 G1 X-15.026 Y18.914 E.01163 G2 X-13.716 Y18.571 I.253 J-1.705 E.04618 G3 X-12.733 Y17.62 I5.239 J4.43 E.04544 G1 X-12.405 Y17.495 E.01163 G3 X-11.095 Y17.839 I.253 J1.705 E.04618 G2 X-10.112 Y18.79 I5.239 J-4.43 E.04544 G1 X-9.785 Y18.914 E.01163 G2 X-8.474 Y18.571 I.253 J-1.705 E.04618 G3 X-7.492 Y17.62 I5.239 J4.43 E.04544 G1 X-7.164 Y17.495 E.01163 G3 X-5.854 Y17.839 I.253 J1.705 E.04618 G2 X-4.871 Y18.79 I5.239 J-4.43 E.04544 G1 X-4.543 Y18.914 E.01163 G2 X-3.233 Y18.571 I.253 J-1.705 E.04618 G3 X-2.25 Y17.62 I5.239 J4.43 E.04544 G1 X-1.923 Y17.495 E.01163 G3 X-.612 Y17.839 I.253 J1.705 E.04618 G2 X.37 Y18.79 I5.239 J-4.43 E.04544 G1 X.698 Y18.914 E.01163 G2 X2.008 Y18.571 I.253 J-1.705 E.04618 G3 X2.991 Y17.62 I5.239 J4.43 E.04544 G1 X3.319 Y17.495 E.01163 G3 X4.629 Y17.839 I.253 J1.705 E.04618 G2 X5.612 Y18.79 I5.239 J-4.43 E.04544 G1 X5.939 Y18.914 E.01163 G2 X7.25 Y18.571 I.253 J-1.705 E.04618 G3 X8.232 Y17.62 I5.239 J4.43 E.04544 G1 X8.56 Y17.495 E.01163 G3 X9.87 Y17.839 I.253 J1.705 E.04618 G2 X10.853 Y18.79 I5.239 J-4.43 E.04544 G1 X11.181 Y18.914 E.01163 G2 X12.491 Y18.571 I.253 J-1.705 E.04618 G3 X13.474 Y17.62 I5.239 J4.43 E.04544 G1 X13.801 Y17.495 E.01163 G3 X15.112 Y17.839 I.253 J1.705 E.04618 G2 X16.094 Y18.79 I5.239 J-4.43 E.04544 G1 X16.422 Y18.914 E.01163 G2 X17.732 Y18.571 I.253 J-1.705 E.04618 G3 X18.715 Y17.62 I5.239 J4.43 E.04544 G1 X19.043 Y17.495 E.01163 G3 X20.353 Y17.839 I.253 J1.705 E.04618 G2 X21.336 Y18.79 I5.239 J-4.43 E.04544 G2 X21.937 Y18.902 I.431 J-.64 E.02086 G1 X21.937 Y21.323 E.08029 G1 X21.663 Y21.191 E.01007 G2 X20.68 Y20.24 I-5.239 J4.43 E.04544 G1 X20.353 Y20.116 E.01163 G2 X19.043 Y20.459 I-.253 J1.705 E.04618 G3 X18.06 Y21.411 I-5.239 J-4.43 E.04544 G1 X17.732 Y21.535 E.01163 G3 X16.422 Y21.191 I-.253 J-1.705 E.04618 G2 X15.439 Y20.24 I-5.239 J4.43 E.04544 G1 X15.112 Y20.116 E.01163 G2 X13.801 Y20.459 I-.253 J1.705 E.04618 G3 X12.819 Y21.411 I-5.239 J-4.43 E.04544 G1 X12.491 Y21.535 E.01163 G3 X11.181 Y21.191 I-.253 J-1.705 E.04618 G2 X10.198 Y20.24 I-5.239 J4.43 E.04544 G1 X9.87 Y20.116 E.01163 G2 X8.56 Y20.459 I-.253 J1.705 E.04618 G3 X7.577 Y21.411 I-5.239 J-4.43 E.04544 G1 X7.25 Y21.535 E.01163 G3 X5.939 Y21.191 I-.253 J-1.705 E.04618 G2 X4.957 Y20.24 I-5.239 J4.43 E.04544 G1 X4.629 Y20.116 E.01163 G2 X3.319 Y20.459 I-.253 J1.705 E.04618 G3 X2.336 Y21.411 I-5.239 J-4.43 E.04544 G1 X2.008 Y21.535 E.01163 G3 X.698 Y21.191 I-.253 J-1.705 E.04618 G2 X-.285 Y20.24 I-5.239 J4.43 E.04544 G1 X-.612 Y20.116 E.01163 G2 X-1.923 Y20.459 I-.253 J1.705 E.04618 G3 X-2.905 Y21.411 I-5.239 J-4.43 E.04544 G1 X-3.233 Y21.535 E.01163 G3 X-4.543 Y21.191 I-.253 J-1.705 E.04618 G2 X-5.526 Y20.24 I-5.239 J4.43 E.04544 G1 X-5.854 Y20.116 E.01163 G2 X-7.164 Y20.459 I-.253 J1.705 E.04618 G3 X-8.147 Y21.411 I-5.239 J-4.43 E.04544 G1 X-8.474 Y21.535 E.01163 G3 X-9.785 Y21.191 I-.253 J-1.705 E.04618 G2 X-10.767 Y20.24 I-5.239 J4.43 E.04544 G1 X-11.095 Y20.116 E.01163 G2 X-12.405 Y20.459 I-.253 J1.705 E.04618 G3 X-13.388 Y21.411 I-5.239 J-4.43 E.04544 G1 X-13.716 Y21.535 E.01163 G3 X-15.026 Y21.191 I-.253 J-1.705 E.04618 G2 X-16.009 Y20.24 I-5.239 J4.43 E.04544 G1 X-16.336 Y20.116 E.01163 G2 X-17.647 Y20.459 I-.253 J1.705 E.04618 G3 X-18.629 Y21.411 I-5.239 J-4.43 E.04544 G1 X-18.957 Y21.535 E.01163 G3 X-20.267 Y21.191 I-.253 J-1.705 E.04618 G2 X-21.25 Y20.24 I-5.239 J4.43 E.04544 G1 X-21.578 Y20.116 E.01163 G2 X-22.888 Y20.459 I-.253 J1.705 E.04618 G3 X-23.871 Y21.411 I-5.239 J-4.43 E.04544 G1 X-24.198 Y21.535 E.01163 G3 X-25.509 Y21.191 I-.253 J-1.705 E.04618 G2 X-26.491 Y20.24 I-5.239 J4.43 E.04544 G1 X-26.819 Y20.116 E.01163 G2 X-28.129 Y20.459 I-.253 J1.705 E.04618 G3 X-29.112 Y21.411 I-5.239 J-4.43 E.04544 G1 X-29.44 Y21.535 E.01163 G3 X-30.75 Y21.191 I-.253 J-1.705 E.04618 G2 X-31.733 Y20.24 I-5.239 J4.43 E.04544 G1 X-32.06 Y20.116 E.01163 G2 X-33.37 Y20.459 I-.253 J1.705 E.04618 G3 X-34.353 Y21.411 I-5.239 J-4.43 E.04544 G1 X-34.681 Y21.535 E.01163 G3 X-35.991 Y21.191 I-.253 J-1.705 E.04618 G2 X-36.974 Y20.24 I-5.239 J4.43 E.04544 G1 X-37.301 Y20.116 E.01163 G2 X-38.612 Y20.459 I-.253 J1.705 E.04618 G3 X-39.595 Y21.411 I-5.239 J-4.43 E.04544 G1 X-39.922 Y21.535 E.01163 G3 X-41.232 Y21.191 I-.253 J-1.705 E.04618 G2 X-42.215 Y20.24 I-5.239 J4.43 E.04544 G1 X-42.537 Y20.118 E.01142 G1 X-42.537 Y21.746 E.05401 G1 X-42.537 Y26.699 F30000 G1 F16200 G1 X-42.537 Y28.327 E.05401 G2 X-41.56 Y29.272 I5.206 J-4.404 E.04516 G1 X-41.232 Y29.397 E.01163 G2 X-39.922 Y29.053 I.253 J-1.705 E.04618 G3 X-38.939 Y28.102 I5.239 J4.43 E.04544 G1 X-38.612 Y27.978 E.01163 G3 X-37.301 Y28.321 I.253 J1.705 E.04618 G2 X-36.319 Y29.272 I5.239 J-4.43 E.04544 G1 X-35.991 Y29.397 E.01163 G2 X-34.681 Y29.053 I.253 J-1.705 E.04618 G3 X-33.698 Y28.102 I5.239 J4.43 E.04544 G1 X-33.37 Y27.978 E.01163 G3 X-32.06 Y28.321 I.253 J1.705 E.04618 G2 X-31.077 Y29.272 I5.239 J-4.43 E.04544 G1 X-30.75 Y29.397 E.01163 G2 X-29.44 Y29.053 I.253 J-1.705 E.04618 G3 X-28.457 Y28.102 I5.239 J4.43 E.04544 G1 X-28.129 Y27.978 E.01163 G3 X-26.819 Y28.321 I.253 J1.705 E.04618 G2 X-25.836 Y29.272 I5.239 J-4.43 E.04544 G1 X-25.563 Y29.376 E.00969 G1 X-25.563 Y31.618 E.07436 G2 X-26.491 Y30.723 I-4.931 J4.186 E.04284 G1 X-26.819 Y30.598 E.01163 G2 X-28.129 Y30.942 I-.253 J1.705 E.04618 G3 X-29.112 Y31.893 I-5.239 J-4.43 E.04544 G1 X-29.44 Y32.018 E.01163 G3 X-30.75 Y31.674 I-.253 J-1.705 E.04618 G2 X-31.733 Y30.723 I-5.239 J4.43 E.04544 G1 X-32.06 Y30.598 E.01163 G2 X-33.37 Y30.942 I-.253 J1.705 E.04618 G3 X-34.353 Y31.893 I-5.239 J-4.43 E.04544 G1 X-34.681 Y32.018 E.01163 G3 X-35.991 Y31.674 I-.253 J-1.705 E.04618 G2 X-36.974 Y30.723 I-5.239 J4.43 E.04544 G1 X-37.301 Y30.598 E.01163 G2 X-38.612 Y30.942 I-.253 J1.705 E.04618 G3 X-39.595 Y31.893 I-5.239 J-4.43 E.04544 G1 X-39.922 Y32.018 E.01163 G3 X-41.232 Y31.674 I-.253 J-1.705 E.04618 G2 X-42.215 Y30.723 I-5.239 J4.43 E.04544 G1 X-42.537 Y30.601 E.01142 G1 X-42.537 Y32.229 E.05401 G1 X-40.789 Y59.737 F30000 G1 F16200 G1 X-39.161 Y59.737 E.05401 G3 X-38.612 Y59.426 I.719 J.628 E.02134 G3 X-37.369 Y59.737 I.257 J1.61 E.04369 G1 X-33.92 Y59.737 E.11442 G3 X-33.37 Y59.426 I.719 J.628 E.02134 G3 X-32.127 Y59.737 I.257 J1.61 E.04369 G1 X-28.678 Y59.737 E.11442 G3 X-28.129 Y59.426 I.719 J.628 E.02134 G3 X-26.886 Y59.737 I.257 J1.61 E.04369 G1 X-23.437 Y59.737 E.11442 G3 X-22.888 Y59.426 I.719 J.628 E.02134 G3 X-21.645 Y59.737 I.257 J1.61 E.04369 G1 X-18.196 Y59.737 E.11442 G3 X-17.647 Y59.426 I.719 J.628 E.02134 G3 X-16.404 Y59.737 I.257 J1.61 E.04369 G1 X-12.954 Y59.737 E.11442 G3 X-12.405 Y59.426 I.719 J.628 E.02134 G3 X-11.162 Y59.737 I.257 J1.61 E.04369 G1 X-7.713 Y59.737 E.11442 G3 X-7.164 Y59.426 I.719 J.628 E.02134 G3 X-5.921 Y59.737 I.257 J1.61 E.04369 G1 X-2.472 Y59.737 E.11442 G3 X-1.923 Y59.426 I.719 J.628 E.02134 G3 X-.68 Y59.737 I.257 J1.61 E.04369 G1 X2.77 Y59.737 E.11442 G3 X3.319 Y59.426 I.719 J.628 E.02134 G3 X4.562 Y59.737 I.257 J1.61 E.04369 G1 X8.011 Y59.737 E.11442 G3 X8.56 Y59.426 I.719 J.628 E.02134 G3 X9.803 Y59.737 I.257 J1.61 E.04369 G1 X13.252 Y59.737 E.11442 G3 X13.801 Y59.426 I.719 J.628 E.02134 G3 X15.044 Y59.737 I.257 J1.61 E.04369 G1 X18.493 Y59.737 E.11442 G3 X19.043 Y59.426 I.719 J.628 E.02134 G3 X20.286 Y59.737 I.257 J1.61 E.04369 G1 X21.641 Y59.737 E.04496 G3 X21.763 Y57.928 I2.606 J-.733 E.06131 G1 X21.663 Y57.881 E.00365 G2 X20.68 Y56.929 I-5.239 J4.43 E.04544 G1 X20.353 Y56.805 E.01163 G2 X19.043 Y57.149 I-.253 J1.705 E.04618 G3 X18.06 Y58.1 I-5.239 J-4.43 E.04544 G1 X17.732 Y58.224 E.01163 G3 X16.422 Y57.881 I-.253 J-1.705 E.04618 G2 X15.439 Y56.929 I-5.239 J4.43 E.04544 G1 X15.112 Y56.805 E.01163 G2 X13.801 Y57.149 I-.253 J1.705 E.04618 G3 X12.819 Y58.1 I-5.239 J-4.43 E.04544 G1 X12.491 Y58.224 E.01163 G3 X11.181 Y57.881 I-.253 J-1.705 E.04618 G2 X10.198 Y56.929 I-5.239 J4.43 E.04544 G1 X9.87 Y56.805 E.01163 G2 X8.56 Y57.149 I-.253 J1.705 E.04618 G3 X7.577 Y58.1 I-5.239 J-4.43 E.04544 G1 X7.25 Y58.224 E.01163 G3 X5.939 Y57.881 I-.253 J-1.705 E.04618 G2 X4.957 Y56.929 I-5.239 J4.43 E.04544 G1 X4.629 Y56.805 E.01163 G2 X3.319 Y57.149 I-.253 J1.705 E.04618 G3 X2.336 Y58.1 I-5.239 J-4.43 E.04544 G1 X2.008 Y58.224 E.01163 G3 X.698 Y57.881 I-.253 J-1.705 E.04618 G2 X-.285 Y56.929 I-5.239 J4.43 E.04544 G1 X-.612 Y56.805 E.01163 G2 X-1.923 Y57.149 I-.253 J1.705 E.04618 G3 X-2.905 Y58.1 I-5.239 J-4.43 E.04544 G1 X-3.233 Y58.224 E.01163 G3 X-4.543 Y57.881 I-.253 J-1.705 E.04618 G2 X-5.526 Y56.929 I-5.239 J4.43 E.04544 G1 X-5.854 Y56.805 E.01163 G2 X-7.164 Y57.149 I-.253 J1.705 E.04618 G3 X-8.147 Y58.1 I-5.239 J-4.43 E.04544 G1 X-8.474 Y58.224 E.01163 G3 X-9.785 Y57.881 I-.253 J-1.705 E.04618 G2 X-10.767 Y56.929 I-5.239 J4.43 E.04544 G1 X-11.095 Y56.805 E.01163 G2 X-12.405 Y57.149 I-.253 J1.705 E.04618 G3 X-13.388 Y58.1 I-5.239 J-4.43 E.04544 G1 X-13.716 Y58.224 E.01163 G3 X-15.026 Y57.881 I-.253 J-1.705 E.04618 G2 X-16.009 Y56.929 I-5.239 J4.43 E.04544 G1 X-16.336 Y56.805 E.01163 G2 X-17.647 Y57.149 I-.253 J1.705 E.04618 G3 X-18.629 Y58.1 I-5.239 J-4.43 E.04544 G1 X-18.957 Y58.224 E.01163 G3 X-20.267 Y57.881 I-.253 J-1.705 E.04618 G2 X-21.25 Y56.929 I-5.239 J4.43 E.04544 G1 X-21.578 Y56.805 E.01163 G2 X-22.888 Y57.149 I-.253 J1.705 E.04618 G3 X-23.871 Y58.1 I-5.239 J-4.43 E.04544 G1 X-24.198 Y58.224 E.01163 G3 X-25.509 Y57.881 I-.253 J-1.705 E.04618 G2 X-26.491 Y56.929 I-5.239 J4.43 E.04544 G1 X-26.819 Y56.805 E.01163 G2 X-28.129 Y57.149 I-.253 J1.705 E.04618 G3 X-29.112 Y58.1 I-5.239 J-4.43 E.04544 G1 X-29.44 Y58.224 E.01163 G3 X-30.75 Y57.881 I-.253 J-1.705 E.04618 G2 X-31.733 Y56.929 I-5.239 J4.43 E.04544 G1 X-32.06 Y56.805 E.01163 G2 X-33.37 Y57.149 I-.253 J1.705 E.04618 G3 X-34.353 Y58.1 I-5.239 J-4.43 E.04544 G1 X-34.681 Y58.224 E.01163 G3 X-35.991 Y57.881 I-.253 J-1.705 E.04618 G2 X-36.974 Y56.929 I-5.239 J4.43 E.04544 G1 X-37.301 Y56.805 E.01163 G2 X-38.612 Y57.149 I-.253 J1.705 E.04618 G3 X-39.595 Y58.1 I-5.239 J-4.43 E.04544 G1 X-39.922 Y58.224 E.01163 G3 X-41.232 Y57.881 I-.253 J-1.705 E.04618 G2 X-42.215 Y56.929 I-5.239 J4.43 E.04544 G1 X-42.543 Y56.805 E.01163 G1 X-43.23 Y56.849 E.02286 G2 X-46.934 Y57.406 I-1.569 J2.161 E.13769 G2 X-47.784 Y56.805 I-1.528 J1.259 E.03494 G1 X-48.537 Y56.881 E.0251 G1 X-48.537 Y59.45 E.08523 G1 X-47.851 Y59.737 E.02465 G1 X-47.359 Y59.737 E.01633 G3 X-47.435 Y58.612 I2.705 J-.748 E.03764 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-47.443 Y59.348 G1 X-47.359 Y59.737 G1 X-47.851 Y59.737 G1 X-48.197 Y59.592 ;WIPE_END G1 X-44.859 Y52.728 Z2 F30000 G1 X-42.537 Y47.953 Z2 G1 Z1.6 G1 E.8 F1800 G1 F16200 G1 X-42.537 Y46.325 E.05401 G3 X-41.888 Y46.723 I-.244 J1.126 E.02576 G1 X-41.232 Y47.398 E.0312 G2 X-39.595 Y47.617 I1.024 J-1.426 E.05707 G2 X-38.612 Y46.666 I-4.256 J-5.381 E.04544 G3 X-36.974 Y46.447 I1.024 J1.426 E.05707 G3 X-35.991 Y47.398 I-4.256 J5.381 E.04544 G2 X-34.353 Y47.617 I1.024 J-1.426 E.05707 G2 X-33.37 Y46.666 I-4.256 J-5.381 E.04544 G3 X-31.733 Y46.447 I1.024 J1.426 E.05707 G3 X-30.75 Y47.398 I-4.256 J5.381 E.04544 G2 X-29.112 Y47.617 I1.024 J-1.426 E.05707 G2 X-28.129 Y46.666 I-4.256 J-5.381 E.04544 G3 X-26.491 Y46.447 I1.024 J1.426 E.05707 G3 X-25.563 Y47.342 I-4.003 J5.081 E.04284 G1 X-25.563 Y45.1 E.07436 G3 X-26.164 Y44.72 I.242 J-1.047 E.02403 G1 X-26.819 Y44.045 E.0312 G2 X-28.457 Y43.826 I-1.024 J1.426 E.05707 G2 X-29.44 Y44.777 I4.256 J5.381 E.04544 G3 X-31.077 Y44.996 I-1.024 J-1.426 E.05707 G3 X-32.06 Y44.045 I4.256 J-5.381 E.04544 G2 X-33.698 Y43.826 I-1.024 J1.426 E.05707 G2 X-34.681 Y44.777 I4.256 J5.381 E.04544 G3 X-36.319 Y44.996 I-1.024 J-1.426 E.05707 G3 X-37.301 Y44.045 I4.256 J-5.381 E.04544 G2 X-38.939 Y43.826 I-1.024 J1.426 E.05707 G2 X-39.922 Y44.777 I4.256 J5.381 E.04544 G3 X-41.56 Y44.996 I-1.024 J-1.426 E.05707 G3 X-42.537 Y44.051 I4.229 J-5.349 E.04516 G1 X-42.537 Y41.083 E.09846 G3 X-41.888 Y41.482 I-.244 J1.126 E.02576 G1 X-41.232 Y42.157 E.0312 G2 X-39.595 Y42.376 I1.024 J-1.426 E.05707 G2 X-38.612 Y41.425 I-4.257 J-5.381 E.04544 G3 X-36.974 Y41.206 I1.024 J1.426 E.05707 G3 X-35.991 Y42.157 I-4.256 J5.381 E.04544 G2 X-34.353 Y42.376 I1.024 J-1.426 E.05707 G2 X-33.37 Y41.425 I-4.256 J-5.381 E.04544 G3 X-31.733 Y41.206 I1.024 J1.426 E.05707 G3 X-30.75 Y42.157 I-4.256 J5.381 E.04544 G2 X-29.112 Y42.376 I1.024 J-1.426 E.05707 G2 X-28.129 Y41.425 I-4.256 J-5.381 E.04544 G3 X-26.491 Y41.206 I1.024 J1.426 E.05707 G3 X-25.563 Y42.1 I-4.003 J5.081 E.04284 G1 X-25.563 Y39.859 E.07436 G3 X-26.164 Y39.479 I.242 J-1.047 E.02403 G1 X-26.819 Y38.804 E.0312 G2 X-28.457 Y38.585 I-1.024 J1.426 E.05707 G2 X-29.44 Y39.536 I4.257 J5.381 E.04544 G3 X-31.077 Y39.755 I-1.024 J-1.426 E.05707 G3 X-32.06 Y38.804 I4.256 J-5.381 E.04544 G2 X-33.698 Y38.585 I-1.024 J1.426 E.05707 G2 X-34.681 Y39.536 I4.256 J5.381 E.04544 G3 X-36.319 Y39.755 I-1.024 J-1.426 E.05707 G3 X-37.301 Y38.804 I4.256 J-5.381 E.04544 G2 X-38.939 Y38.585 I-1.024 J1.426 E.05707 G2 X-39.922 Y39.536 I4.256 J5.381 E.04544 G3 X-41.56 Y39.755 I-1.024 J-1.426 E.05707 G3 X-42.537 Y38.81 I4.229 J-5.349 E.04516 G1 X-42.537 Y37.737 E.0356 G1 X-43.092 Y37.737 E.01841 G1 X-48.3 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-45.827 Y52.263 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-44.199 Y52.263 E.05401 G3 X-44.836 Y52.858 I-3.29 J-2.884 E.02898 G3 X-46.839 Y52.263 I-.624 J-1.569 E.07474 G1 X-47.823 Y52.263 E.03265 G1 X-47.823 Y52.467 E.00675 G1 X-48.537 Y52.467 E.02368 G1 X-48.537 Y54.209 E.05779 G1 X-47.784 Y54.528 E.02712 G2 X-46.801 Y55.479 I5.239 J-4.43 E.04544 G2 X-45.163 Y55.26 I.614 J-1.645 E.05707 G3 X-44.181 Y54.309 I5.239 J4.43 E.04544 G3 X-42.543 Y54.528 I.614 J1.645 E.05707 G2 X-41.56 Y55.479 I5.239 J-4.43 E.04544 G2 X-39.922 Y55.26 I.614 J-1.645 E.05707 G3 X-38.939 Y54.309 I5.239 J4.43 E.04544 G3 X-37.301 Y54.528 I.614 J1.645 E.05707 G2 X-36.319 Y55.479 I5.239 J-4.43 E.04544 G2 X-34.681 Y55.26 I.614 J-1.645 E.05707 G3 X-33.698 Y54.309 I5.239 J4.43 E.04544 G3 X-32.06 Y54.528 I.614 J1.645 E.05707 G2 X-31.077 Y55.479 I5.239 J-4.43 E.04544 G2 X-29.44 Y55.26 I.614 J-1.645 E.05707 G3 X-28.457 Y54.309 I5.239 J4.43 E.04544 G3 X-26.819 Y54.528 I.614 J1.645 E.05707 G2 X-25.836 Y55.479 I5.239 J-4.43 E.04544 G2 X-24.198 Y55.26 I.614 J-1.645 E.05707 G3 X-23.215 Y54.309 I5.239 J4.43 E.04544 G3 X-21.578 Y54.528 I.614 J1.645 E.05707 G2 X-20.595 Y55.479 I5.239 J-4.43 E.04544 G2 X-18.957 Y55.26 I.614 J-1.645 E.05707 G3 X-17.974 Y54.309 I5.239 J4.43 E.04544 G3 X-16.336 Y54.528 I.614 J1.645 E.05707 G2 X-15.354 Y55.479 I5.239 J-4.43 E.04544 G2 X-13.716 Y55.26 I.614 J-1.645 E.05707 G3 X-12.733 Y54.309 I5.239 J4.43 E.04544 G3 X-11.095 Y54.528 I.614 J1.645 E.05707 G2 X-10.112 Y55.479 I5.239 J-4.43 E.04544 G2 X-8.474 Y55.26 I.614 J-1.645 E.05707 G3 X-7.492 Y54.309 I5.239 J4.43 E.04544 G3 X-5.854 Y54.528 I.614 J1.645 E.05707 G2 X-4.871 Y55.479 I5.239 J-4.43 E.04544 G2 X-3.233 Y55.26 I.614 J-1.645 E.05707 G3 X-2.25 Y54.309 I5.239 J4.43 E.04544 G3 X-.612 Y54.528 I.614 J1.645 E.05707 G2 X.37 Y55.479 I5.239 J-4.43 E.04544 G2 X2.008 Y55.26 I.614 J-1.645 E.05707 G3 X2.991 Y54.309 I5.239 J4.43 E.04544 G3 X4.629 Y54.528 I.614 J1.645 E.05707 G2 X5.612 Y55.479 I5.239 J-4.43 E.04544 G2 X7.25 Y55.26 I.614 J-1.645 E.05707 G3 X8.232 Y54.309 I5.239 J4.43 E.04544 G3 X9.87 Y54.528 I.614 J1.645 E.05707 G2 X10.853 Y55.479 I5.239 J-4.43 E.04544 G2 X12.491 Y55.26 I.614 J-1.645 E.05707 G3 X13.474 Y54.309 I5.239 J4.43 E.04544 G3 X15.112 Y54.528 I.614 J1.645 E.05707 G2 X16.094 Y55.479 I5.239 J-4.43 E.04544 G2 X17.732 Y55.26 I.614 J-1.645 E.05707 G3 X18.715 Y54.309 I5.239 J4.43 E.04544 G3 X20.353 Y54.528 I.614 J1.645 E.05707 G2 X21.336 Y55.479 I5.239 J-4.43 E.04544 G2 X22.974 Y55.26 I.614 J-1.645 E.05707 G3 X23.956 Y54.309 I5.239 J4.43 E.04544 G3 X25.594 Y54.528 I.614 J1.645 E.05707 G1 X26.249 Y55.203 E.0312 G2 X26.905 Y55.604 I.9 J-.735 E.02597 G1 X27.56 Y55.575 E.02175 G1 X27.937 Y55.394 E.01388 G1 X27.937 Y52.971 E.08037 G3 X26.539 Y52.263 I-.035 J-1.665 E.0541 G1 X23.938 Y52.263 E.08628 G3 X23.301 Y52.858 I-3.29 J-2.884 E.02898 G3 X21.663 Y52.639 I-.614 J-1.645 E.05707 G2 X20.68 Y51.688 I-5.239 J4.43 E.04544 G2 X19.043 Y51.907 I-.614 J1.645 E.05707 G3 X18.06 Y52.858 I-5.239 J-4.43 E.04544 G3 X16.422 Y52.639 I-.614 J-1.645 E.05707 G2 X15.439 Y51.688 I-5.239 J4.43 E.04544 G2 X13.801 Y51.907 I-.614 J1.645 E.05707 G3 X12.819 Y52.858 I-5.239 J-4.43 E.04544 G3 X11.181 Y52.639 I-.614 J-1.645 E.05707 G2 X10.198 Y51.688 I-5.239 J4.43 E.04544 G2 X8.56 Y51.907 I-.614 J1.645 E.05707 G3 X7.577 Y52.858 I-5.239 J-4.43 E.04544 G3 X5.939 Y52.639 I-.614 J-1.645 E.05707 G2 X4.957 Y51.688 I-5.239 J4.43 E.04544 G2 X3.319 Y51.907 I-.614 J1.645 E.05707 G3 X2.336 Y52.858 I-5.239 J-4.43 E.04544 G3 X.698 Y52.639 I-.614 J-1.645 E.05707 G2 X-.285 Y51.688 I-5.239 J4.43 E.04544 G2 X-1.923 Y51.907 I-.614 J1.645 E.05707 G3 X-2.905 Y52.858 I-5.239 J-4.43 E.04544 G3 X-4.543 Y52.639 I-.614 J-1.645 E.05707 G2 X-5.526 Y51.688 I-5.239 J4.43 E.04544 G2 X-7.164 Y51.907 I-.614 J1.645 E.05707 G3 X-8.147 Y52.858 I-5.239 J-4.43 E.04544 G3 X-9.785 Y52.639 I-.614 J-1.645 E.05707 G2 X-10.767 Y51.688 I-5.239 J4.43 E.04544 G2 X-12.405 Y51.907 I-.614 J1.645 E.05707 G3 X-13.388 Y52.858 I-5.239 J-4.43 E.04544 G3 X-15.026 Y52.639 I-.614 J-1.645 E.05707 G2 X-16.009 Y51.688 I-5.239 J4.43 E.04544 G2 X-17.647 Y51.907 I-.614 J1.645 E.05707 G3 X-18.629 Y52.858 I-5.239 J-4.43 E.04544 G3 X-20.267 Y52.639 I-.614 J-1.645 E.05707 G2 X-21.25 Y51.688 I-5.239 J4.43 E.04544 G2 X-22.888 Y51.907 I-.614 J1.645 E.05707 G3 X-23.871 Y52.858 I-5.239 J-4.43 E.04544 G3 X-25.509 Y52.639 I-.614 J-1.645 E.05707 G2 X-26.491 Y51.688 I-5.239 J4.43 E.04544 G2 X-28.129 Y51.907 I-.614 J1.645 E.05707 G3 X-29.112 Y52.858 I-5.239 J-4.43 E.04544 G3 X-30.75 Y52.639 I-.614 J-1.645 E.05707 G2 X-31.733 Y51.688 I-5.239 J4.43 E.04544 G2 X-33.37 Y51.907 I-.614 J1.645 E.05707 G3 X-34.353 Y52.858 I-5.239 J-4.43 E.04544 G3 X-35.991 Y52.639 I-.614 J-1.645 E.05707 G2 X-36.974 Y51.688 I-5.239 J4.43 E.04544 G2 X-38.612 Y51.907 I-.614 J1.645 E.05707 G3 X-39.595 Y52.858 I-5.239 J-4.43 E.04544 G3 X-41.232 Y52.639 I-.614 J-1.645 E.05707 G1 X-41.888 Y51.964 E.0312 G2 X-42.537 Y51.566 I-.893 J.727 E.02576 G1 X-42.537 Y49.293 E.0754 G2 X-41.56 Y50.238 I5.206 J-4.404 E.04516 G2 X-39.922 Y50.019 I.614 J-1.645 E.05707 G3 X-38.939 Y49.068 I5.239 J4.43 E.04544 G3 X-37.301 Y49.287 I.614 J1.645 E.05707 G2 X-36.319 Y50.238 I5.239 J-4.43 E.04544 G2 X-34.681 Y50.019 I.614 J-1.645 E.05707 G3 X-33.698 Y49.068 I5.239 J4.43 E.04544 G3 X-32.06 Y49.287 I.614 J1.645 E.05707 G2 X-31.077 Y50.238 I5.239 J-4.43 E.04544 G2 X-29.44 Y50.019 I.614 J-1.645 E.05707 G3 X-28.457 Y49.068 I5.239 J4.43 E.04544 G3 X-26.819 Y49.287 I.614 J1.645 E.05707 G2 X-25.836 Y50.238 I5.239 J-4.43 E.04544 G2 X-24.198 Y50.019 I.614 J-1.645 E.05707 G3 X-23.215 Y49.068 I5.239 J4.43 E.04544 G3 X-21.578 Y49.287 I.614 J1.645 E.05707 G2 X-20.595 Y50.238 I5.239 J-4.43 E.04544 G2 X-18.957 Y50.019 I.614 J-1.645 E.05707 G3 X-17.974 Y49.068 I5.239 J4.43 E.04544 G3 X-16.336 Y49.287 I.614 J1.645 E.05707 G2 X-15.354 Y50.238 I5.239 J-4.43 E.04544 G2 X-13.716 Y50.019 I.614 J-1.645 E.05707 G3 X-12.733 Y49.068 I5.239 J4.43 E.04544 G3 X-11.095 Y49.287 I.614 J1.645 E.05707 G2 X-10.112 Y50.238 I5.239 J-4.43 E.04544 G2 X-8.474 Y50.019 I.614 J-1.645 E.05707 G3 X-7.492 Y49.068 I5.239 J4.43 E.04544 G3 X-5.854 Y49.287 I.614 J1.645 E.05707 G2 X-4.871 Y50.238 I5.239 J-4.43 E.04544 G2 X-3.233 Y50.019 I.614 J-1.645 E.05707 G3 X-2.25 Y49.068 I5.239 J4.43 E.04544 G3 X-.612 Y49.287 I.614 J1.645 E.05707 M73 P28 R58 G2 X.37 Y50.238 I5.239 J-4.43 E.04544 G2 X2.008 Y50.019 I.614 J-1.645 E.05707 G3 X2.991 Y49.068 I5.239 J4.43 E.04544 G3 X4.629 Y49.287 I.614 J1.645 E.05707 G2 X5.612 Y50.238 I5.239 J-4.43 E.04544 G2 X7.25 Y50.019 I.614 J-1.645 E.05707 G3 X8.232 Y49.068 I5.239 J4.43 E.04544 G3 X9.87 Y49.287 I.614 J1.645 E.05707 G2 X10.853 Y50.238 I5.239 J-4.43 E.04544 G2 X12.491 Y50.019 I.614 J-1.645 E.05707 G3 X13.474 Y49.068 I5.239 J4.43 E.04544 G3 X15.112 Y49.287 I.614 J1.645 E.05707 G2 X16.094 Y50.238 I5.239 J-4.43 E.04544 G2 X17.732 Y50.019 I.614 J-1.645 E.05707 G3 X18.715 Y49.068 I5.239 J4.43 E.04544 G3 X20.353 Y49.287 I.614 J1.645 E.05707 G1 X21.008 Y49.962 E.0312 G2 X21.937 Y50.35 I.83 J-.679 E.03477 G1 X21.937 Y47.529 E.09357 G1 X21.663 Y47.398 E.01007 G2 X20.68 Y46.447 I-5.239 J4.43 E.04544 G2 X19.043 Y46.666 I-.614 J1.645 E.05707 G3 X18.06 Y47.617 I-5.239 J-4.43 E.04544 G3 X16.422 Y47.398 I-.614 J-1.645 E.05707 G2 X15.439 Y46.447 I-5.239 J4.43 E.04544 G2 X13.801 Y46.666 I-.614 J1.645 E.05707 G3 X12.819 Y47.617 I-5.239 J-4.43 E.04544 G3 X11.181 Y47.398 I-.614 J-1.645 E.05707 G2 X10.198 Y46.447 I-5.239 J4.43 E.04544 G2 X8.56 Y46.666 I-.614 J1.645 E.05707 G3 X7.577 Y47.617 I-5.239 J-4.43 E.04544 G3 X5.939 Y47.398 I-.614 J-1.645 E.05707 G2 X4.963 Y46.452 I-5.208 J4.4 E.04516 G1 X4.963 Y44.39 E.06843 G2 X5.612 Y44.996 I3.354 J-2.934 E.02951 G2 X7.25 Y44.777 I.614 J-1.645 E.05707 G3 X8.232 Y43.826 I5.239 J4.43 E.04544 G3 X9.87 Y44.045 I.614 J1.645 E.05707 G2 X10.853 Y44.996 I5.239 J-4.43 E.04544 G2 X12.491 Y44.777 I.614 J-1.645 E.05707 G3 X13.474 Y43.826 I5.239 J4.43 E.04544 G3 X15.112 Y44.045 I.614 J1.645 E.05707 G2 X16.094 Y44.996 I5.239 J-4.43 E.04544 G2 X17.732 Y44.777 I.614 J-1.645 E.05707 G3 X18.715 Y43.826 I5.239 J4.43 E.04544 G3 X20.353 Y44.045 I.614 J1.645 E.05707 G1 X21.008 Y44.72 E.0312 G2 X21.937 Y45.109 I.83 J-.679 E.03477 G1 X21.937 Y42.288 E.09357 G1 X21.663 Y42.157 E.01007 G2 X20.68 Y41.206 I-5.239 J4.43 E.04544 G2 X19.043 Y41.425 I-.614 J1.645 E.05707 G3 X18.06 Y42.376 I-5.239 J-4.43 E.04544 G3 X16.422 Y42.157 I-.614 J-1.645 E.05707 G2 X15.439 Y41.206 I-5.239 J4.43 E.04544 G2 X13.801 Y41.425 I-.614 J1.645 E.05707 G3 X12.819 Y42.376 I-5.239 J-4.43 E.04544 G3 X11.181 Y42.157 I-.614 J-1.645 E.05707 G2 X10.198 Y41.206 I-5.239 J4.43 E.04544 G2 X8.56 Y41.425 I-.614 J1.645 E.05707 G3 X7.577 Y42.376 I-5.239 J-4.43 E.04544 G3 X5.939 Y42.157 I-.614 J-1.645 E.05707 G2 X4.963 Y41.211 I-5.208 J4.4 E.04516 G1 X4.963 Y39.148 E.06843 G2 X5.612 Y39.755 I3.354 J-2.934 E.02951 G2 X7.25 Y39.536 I.614 J-1.645 E.05707 G3 X8.232 Y38.585 I5.239 J4.43 E.04544 G3 X9.87 Y38.804 I.614 J1.645 E.05707 G2 X10.853 Y39.755 I5.239 J-4.43 E.04544 G2 X12.491 Y39.536 I.614 J-1.645 E.05707 G3 X13.474 Y38.585 I5.239 J4.43 E.04544 G3 X15.112 Y38.804 I.614 J1.645 E.05707 G2 X16.094 Y39.755 I5.239 J-4.43 E.04544 G2 X17.732 Y39.536 I.614 J-1.645 E.05707 G3 X18.715 Y38.585 I5.239 J4.43 E.04544 G3 X20.353 Y38.804 I.614 J1.645 E.05707 G1 X21.008 Y39.479 E.0312 G2 X21.937 Y39.868 I.83 J-.679 E.03477 G1 X21.937 Y38.239 E.05401 G1 X27.7 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X24.333 Y56.343 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X24.548 Y56.357 E.00714 G3 X26.905 Y57.881 I-.843 J3.888 E.09513 G1 X27.56 Y58.195 E.02411 G1 X27.937 Y58.212 E.01252 G1 X27.937 Y59.737 E.05058 G1 X27.833 Y59.737 E.00343 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X27.937 Y59.737 G1 X27.937 Y58.212 G1 X27.566 Y58.196 ;WIPE_END G1 X22.586 Y52.411 Z2 F30000 G1 X-42.652 Y-23.367 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:1.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.2 I-.257 J1.189 P1 F30000 G1 X49.452 Y-1.649 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.499 Y-1.658 E.00156 G1 X50 Y-1.758 E.01696 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.413 Y-1.641 E.0029 G1 X49.537 Y-1.222 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.583 Y-1.231 E.00145 G1 X50 Y-1.314 E.01305 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.498 Y-1.214 E.00003 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.583 Y-1.231 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.186 Y-.545 ;WIPE_END G1 X50.42 Y-2.111 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.474 Y-2.542 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.497 Y-2.54 E.0007 G1 X50.991 Y-2.392 E.01584 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.434 Y-2.546 E.01341 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.497 Y-2.54 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.089 Y-1.516 ;WIPE_END G1 X44.498 Y-.717 Z2.2 F30000 G1 X28.137 Y1.008 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.12 Y1.026 E.00077 G3 X25.364 Y-2.019 I-1.928 J-1.025 E.25725 G3 X26.08 Y-2.179 I1.031 J2.924 E.02261 G3 X28.283 Y.632 I.112 J2.18 E.1285 G1 X28.151 Y.97 E.01116 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.12 Y1.026 G1 X28.017 Y1.214 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.626 Y2.143 G1 X26.618 Y2.144 ;WIPE_END G1 X19.167 Y.49 Z2.2 F30000 G1 X7.71 Y-2.052 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.151 J2.165 E.33495 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.27 J2.028 E.24847 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.56 Y4.26 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X8.895 Y4.005 I1.133 J1.142 E.01296 G3 X9.583 Y3.797 I.785 J1.353 E.02228 G3 X8.532 Y4.288 I.11 J1.605 E.27408 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.583 Y3.797 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.374 Y3.944 ;WIPE_END G1 X3.166 Y6.453 Z2.2 F30000 G1 X-16.248 Y13.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.151 J-2.165 E.33495 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.267 J-2.029 E.2488 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.462 Y8.976 Z2.2 F30000 G1 X-29.16 Y6.538 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.165 Y6.535 E.00018 G3 X-31.105 Y4.005 I-1.142 J-1.133 E.16864 G3 X-30.417 Y3.797 I.785 J1.353 E.02228 G3 X-29.028 Y6.376 I.11 J1.605 E.11318 G1 X-29.135 Y6.507 E.0052 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.165 Y6.535 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.973 Y6.86 ;WIPE_END G1 X-32.989 Y-.502 Z2.2 F30000 G1 X-38.9 Y-22.092 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.779 Y-22.425 E.01175 G3 X-36.555 Y-24.001 I2.477 J1.139 E.09468 G3 X-33.746 Y-22.236 I.252 J2.717 E.11827 G3 X-38.935 Y-21.994 I-2.556 J.95 E.34012 G1 X-38.913 Y-22.054 E.00212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.52 Y-21.949 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.419 Y-22.247 E.01044 G3 X-37.461 Y-23.298 I2.11 J.961 E.04796 G3 X-36.528 Y-23.595 I1.135 J1.958 E.03272 G3 X-38.547 Y-21.89 I.22 J2.309 E.3901 G1 X-38.537 Y-21.913 E.00083 G1 X-38.113 Y-21.799 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.029 Y-22.055 E.00827 G3 X-37.022 Y-23.03 I1.72 J.768 E.04414 G3 X-36.5 Y-23.16 I.788 J2.043 E.01657 G3 X-38.131 Y-21.764 I.191 J1.874 E.29348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.029 Y-22.055 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-36.788 Y-23.109 G1 X-36.777 Y-23.111 ;WIPE_END G1 X-35.3 Y-30.6 Z2.2 F30000 G1 X-33.803 Y-38.193 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.941 Y-37.926 E.00997 G3 X-38.854 Y-38.34 I-2.359 J-1.362 E.20444 G3 X-36.555 Y-42.001 I2.554 J-.948 E.16563 G3 X-33.784 Y-38.246 I.254 J2.712 E.18588 G1 X-33.789 Y-38.231 E.00054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.146 Y-38.428 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.16 Y-38.402 E.00098 G3 X-38.469 Y-38.471 I-2.141 J-.887 E.18357 G3 X-36.528 Y-41.595 I2.172 J-.815 E.14084 G3 X-34.062 Y-38.689 I.227 J2.306 E.14843 G1 X-34.134 Y-38.466 E.00776 G1 X-34.559 Y-38.566 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.675 Y-38.35 E.00753 G3 X-37.022 Y-41.03 I-1.634 J-.937 E.22009 G3 X-36.5 Y-41.16 I.788 J2.043 E.01657 G3 X-34.556 Y-38.598 I.191 J1.874 E.11843 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.675 Y-38.35 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.052 Y-37.419 ;WIPE_END G1 X-28.583 Y-38.99 Z2.2 F30000 G1 X-20.278 Y-40.736 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.249 Y-40.783 E.00183 G3 X-19.794 Y-41.235 I1.94 J1.498 E.02132 G3 X-18.472 Y-41.731 I1.506 J2.004 E.04747 G3 X-20.428 Y-40.517 I.164 J2.446 E.43145 G1 X-20.3 Y-40.703 E.00751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.51 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.925 Y-40.535 E.00094 G3 X-19.546 Y-40.912 I1.617 J1.249 E.01778 G3 X-18.446 Y-41.325 I1.255 J1.671 E.03951 G3 X-20.074 Y-40.312 I.138 J2.039 E.35967 G1 X-19.962 Y-40.477 E.00662 G1 X-19.58 Y-40.27 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-19.105 Y-40.683 I1.272 J.984 E.01945 G3 X-18.417 Y-40.891 I.785 J1.353 E.02228 G3 X-19.604 Y-40.238 I.11 J1.605 E.2676 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.439 Y-40.427 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.417 Y-40.891 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.822 Y-40.82 ;WIPE_END G1 X-17.074 Y-33.224 Z2.2 F30000 G1 X-15.974 Y-22.054 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.93 Y-21.923 E.00458 G3 X-20.615 Y-20.489 I-2.367 J.637 E.24987 G3 X-18.472 Y-23.731 I2.304 J-.806 E.14909 G3 X-16.034 Y-22.227 I.175 J2.445 E.10151 G1 X-15.987 Y-22.092 E.00474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.359 Y-21.923 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.334 Y-21.815 E.00369 G3 X-19.546 Y-22.912 I-1.974 J.529 E.29302 G3 X-18.446 Y-23.325 I1.255 J1.671 E.03951 G3 X-16.419 Y-22.067 I.138 J2.039 E.08448 G1 X-16.375 Y-21.96 E.00385 G1 X-16.771 Y-21.783 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.754 Y-21.702 E.00254 G3 X-19.105 Y-22.683 I-1.554 J.416 E.22019 G3 X-18.417 Y-22.891 I.785 J1.353 E.02228 G3 X-16.821 Y-21.901 I.11 J1.605 E.06164 G1 X-16.787 Y-21.82 E.00269 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.754 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.306 Y-20.022 ;WIPE_END G1 X-20.701 Y-13.186 Z2.2 F30000 G1 X-42.748 Y31.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z2.2 F30000 G1 X-42.748 Y51.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z2.2 F30000 G1 X4.752 Y47.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z2.2 F30000 G1 X4.752 Y33.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 M73 P28 R57 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z2.2 F30000 G1 X27.252 Y31.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z2.2 F30000 G1 X-28.09 Y-52.948 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.945 E.32005 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32013 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z2.2 F30000 G1 X7.055 Y-53.79 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z2.2 F30000 G1 X-40.155 Y-5.355 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.444 J1.451 E.19522 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.444 J1.451 E.19522 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.295 Y-2.77 Z2.2 F30000 G1 X-48.78 Y-.903 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.731 Y-1.032 E.00425 G3 X-47.636 Y-2.019 I1.923 J1.033 E.04619 G3 X-46.92 Y-2.179 I1.031 J2.924 E.02261 G3 X-48.896 Y-.636 I.112 J2.18 E.33947 G1 X-48.796 Y-.866 E.00772 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.731 Y-1.032 G1 X-48.617 Y-1.214 G1 X-48.345 Y-1.545 G1 X-48.014 Y-1.817 G1 X-47.636 Y-2.019 G1 X-47.328 Y-2.112 ;WIPE_END G1 X-47.188 Y5.519 Z2.2 F30000 G1 X-46.194 Y59.806 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.199 Y59.808 E.00017 G3 X-45.605 Y57.605 I1.392 J-.806 E.07792 G3 X-44.917 Y57.397 I.785 J1.353 E.02228 G3 X-46.082 Y59.983 I.11 J1.605 E.20385 G1 X-46.173 Y59.84 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.199 Y59.808 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.037 Y57.973 ;WIPE_END G1 X-38.407 Y58.176 Z2.2 F30000 G1 X22.806 Y59.806 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.802 Y59.807 E.00013 G3 X23.395 Y57.605 I1.391 J-.806 E.0779 G3 X24.083 Y57.397 I.785 J1.353 E.02228 G3 X22.919 Y59.983 I.11 J1.604 E.20369 G1 X22.827 Y59.84 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.802 Y59.807 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.596 Y58.907 G1 X22.644 Y58.583 G1 X22.753 Y58.3 G1 X22.922 Y58.02 G1 X22.965 Y57.971 ;WIPE_END G1 X17.577 Y52.565 Z2.2 F30000 G1 X-40.59 Y-5.79 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-46.218 Y-3.185 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-47.825 Y-3.07 I-.545 J3.659 E.05386 G1 X-48.537 Y-3.516 E.02786 G1 X-48.537 Y-4.737 E.04051 G1 X-45.945 Y-4.737 E.08597 G1 X-45.819 Y-4.65 E.0051 G1 X-45.163 Y-4.488 E.02239 G2 X-44.558 Y-4.737 I.088 J-.648 E.02276 G1 X-40.704 Y-4.737 E.12783 G1 X-40.577 Y-4.65 E.0051 G1 X-39.922 Y-4.488 E.02239 G2 X-39.267 Y-4.774 I.081 J-.709 E.02484 G1 X-38.612 Y-5.663 E.03662 G3 X-36.974 Y-6.235 I1.44 J1.49 E.05938 G1 X-36.646 Y-5.988 E.0136 G1 X-35.991 Y-5.1 E.03662 G2 X-34.353 Y-4.527 I1.44 J-1.49 E.05938 G1 X-34.026 Y-4.774 E.0136 G1 X-33.37 Y-5.663 E.03662 G3 X-31.733 Y-6.235 I1.44 J1.49 E.05938 G1 X-31.405 Y-5.988 E.0136 G1 X-30.75 Y-5.1 E.03662 G2 X-29.112 Y-4.527 I1.44 J-1.49 E.05938 G1 X-28.784 Y-4.774 E.0136 G1 X-28.129 Y-5.663 E.03662 G3 X-26.491 Y-6.235 I1.44 J1.49 E.05938 G1 X-26.164 Y-5.988 E.0136 G1 X-25.509 Y-5.1 E.03662 G2 X-23.871 Y-4.527 I1.44 J-1.49 E.05938 G1 X-23.543 Y-4.774 E.0136 G1 X-22.888 Y-5.663 E.03662 G3 X-21.25 Y-6.235 I1.44 J1.49 E.05938 G1 X-20.922 Y-5.988 E.0136 G1 X-20.267 Y-5.1 E.03662 G2 X-18.629 Y-4.527 I1.44 J-1.49 E.05938 G1 X-18.302 Y-4.774 E.0136 G1 X-17.647 Y-5.663 E.03662 G3 X-16.009 Y-6.235 I1.44 J1.49 E.05938 G1 X-15.681 Y-5.988 E.0136 G1 X-15.026 Y-5.1 E.03662 G2 X-13.388 Y-4.527 I1.44 J-1.49 E.05938 G1 X-13.06 Y-4.774 E.0136 G1 X-12.405 Y-5.663 E.03662 G3 X-10.767 Y-6.235 I1.44 J1.49 E.05938 G1 X-10.44 Y-5.988 E.0136 G1 X-9.785 Y-5.1 E.03662 G2 X-8.147 Y-4.527 I1.44 J-1.49 E.05938 G1 X-7.819 Y-4.774 E.0136 G1 X-7.164 Y-5.663 E.03662 G3 X-5.526 Y-6.235 I1.44 J1.49 E.05938 G1 X-5.198 Y-5.988 E.0136 G1 X-4.543 Y-5.1 E.03662 G2 X-2.905 Y-4.527 I1.44 J-1.49 E.05938 G1 X-2.578 Y-4.774 E.0136 G1 X-1.923 Y-5.663 E.03662 G3 X-.285 Y-6.235 I1.44 J1.49 E.05938 G1 X.043 Y-5.988 E.0136 G1 X.698 Y-5.1 E.03662 G2 X2.336 Y-4.527 I1.44 J-1.49 E.05938 G1 X2.663 Y-4.774 E.0136 G1 X3.319 Y-5.663 E.03662 G3 X4.957 Y-6.235 I1.44 J1.49 E.05938 G1 X5.284 Y-5.988 E.0136 G1 X5.939 Y-5.1 E.03662 G2 X7.577 Y-4.527 I1.44 J-1.49 E.05938 G1 X7.905 Y-4.774 E.0136 G1 X8.56 Y-5.663 E.03662 G3 X10.198 Y-6.235 I1.44 J1.49 E.05938 G1 X10.525 Y-5.988 E.0136 G1 X11.181 Y-5.1 E.03662 G2 X12.819 Y-4.527 I1.44 J-1.49 E.05938 G1 X13.146 Y-4.774 E.0136 G1 X13.801 Y-5.663 E.03662 G3 X15.439 Y-6.235 I1.44 J1.49 E.05938 G1 X15.767 Y-5.988 E.0136 G1 X16.422 Y-5.1 E.03662 G2 X18.06 Y-4.527 I1.44 J-1.49 E.05938 G1 X18.387 Y-4.774 E.0136 G1 X18.937 Y-5.519 E.03071 G1 X18.937 Y-8.882 E.11156 G2 X18.387 Y-8.609 I-.039 J.611 E.02132 G1 X17.732 Y-7.72 E.03662 G3 X16.094 Y-7.148 I-1.44 J-1.49 E.05938 G1 X15.767 Y-7.395 E.0136 G1 X15.112 Y-8.283 E.03662 G2 X13.474 Y-8.855 I-1.44 J1.49 E.05938 G1 X13.146 Y-8.609 E.0136 G1 X12.491 Y-7.72 E.03662 G3 X10.853 Y-7.148 I-1.44 J-1.49 E.05938 G1 X10.525 Y-7.395 E.0136 G1 X9.87 Y-8.283 E.03662 G2 X8.232 Y-8.855 I-1.44 J1.49 E.05938 G1 X7.905 Y-8.609 E.0136 G1 X7.25 Y-7.72 E.03662 G3 X5.612 Y-7.148 I-1.44 J-1.49 E.05938 G1 X5.284 Y-7.395 E.0136 G1 X4.629 Y-8.283 E.03662 G2 X2.991 Y-8.855 I-1.44 J1.49 E.05938 G1 X2.663 Y-8.609 E.0136 G1 X2.008 Y-7.72 E.03662 G3 X.37 Y-7.148 I-1.44 J-1.49 E.05938 G1 X.043 Y-7.395 E.0136 G1 X-.612 Y-8.283 E.03662 G2 X-2.25 Y-8.855 I-1.44 J1.49 E.05938 G1 X-2.578 Y-8.609 E.0136 G1 X-3.233 Y-7.72 E.03662 G3 X-4.871 Y-7.148 I-1.44 J-1.49 E.05938 G1 X-5.198 Y-7.395 E.0136 G1 X-5.854 Y-8.283 E.03662 G2 X-7.492 Y-8.855 I-1.44 J1.49 E.05938 G1 X-7.819 Y-8.609 E.0136 G1 X-8.474 Y-7.72 E.03662 G3 X-10.112 Y-7.148 I-1.44 J-1.49 E.05938 G1 X-10.44 Y-7.395 E.0136 G1 X-11.095 Y-8.283 E.03662 G2 X-12.733 Y-8.855 I-1.44 J1.49 E.05938 G1 X-13.06 Y-8.609 E.0136 G1 X-13.716 Y-7.72 E.03662 G3 X-15.354 Y-7.148 I-1.44 J-1.49 E.05938 G1 X-15.681 Y-7.395 E.0136 G1 X-16.336 Y-8.283 E.03662 G2 X-17.974 Y-8.855 I-1.44 J1.49 E.05938 G1 X-18.302 Y-8.609 E.0136 G1 X-18.957 Y-7.72 E.03662 G3 X-20.595 Y-7.148 I-1.44 J-1.49 E.05938 G1 X-20.922 Y-7.395 E.0136 G1 X-21.578 Y-8.283 E.03662 G2 X-23.215 Y-8.855 I-1.44 J1.49 E.05938 G1 X-23.543 Y-8.609 E.0136 G1 X-24.198 Y-7.72 E.03662 G3 X-25.836 Y-7.148 I-1.44 J-1.49 E.05938 G1 X-26.164 Y-7.395 E.0136 G1 X-26.819 Y-8.283 E.03662 G2 X-28.457 Y-8.855 I-1.44 J1.49 E.05938 G1 X-28.784 Y-8.609 E.0136 G1 X-29.44 Y-7.72 E.03662 G3 X-31.077 Y-7.148 I-1.44 J-1.49 E.05938 G1 X-31.405 Y-7.395 E.0136 G1 X-32.06 Y-8.283 E.03662 G2 X-33.698 Y-8.855 I-1.44 J1.49 E.05938 G1 X-34.026 Y-8.609 E.0136 G1 X-34.681 Y-7.72 E.03662 G3 X-36.319 Y-7.148 I-1.44 J-1.49 E.05938 G1 X-36.646 Y-7.395 E.0136 G1 X-37.301 Y-8.283 E.03662 G2 X-38.939 Y-8.855 I-1.44 J1.49 E.05938 G2 X-39.537 Y-8.243 I.726 J1.306 E.02879 G1 X-39.537 Y-9.812 E.05206 G1 X-39.267 Y-10.015 E.01121 G1 X-38.612 Y-10.904 E.03662 G3 X-36.974 Y-11.476 I1.44 J1.49 E.05938 G1 X-36.646 Y-11.23 E.0136 G1 X-35.991 Y-10.341 E.03662 G2 X-34.353 Y-9.769 I1.44 J-1.49 E.05938 G1 X-34.026 Y-10.015 E.0136 G1 X-33.37 Y-10.904 E.03662 G3 X-31.733 Y-11.476 I1.44 J1.49 E.05938 G1 X-31.405 Y-11.23 E.0136 G1 X-30.75 Y-10.341 E.03662 G2 X-29.112 Y-9.769 I1.44 J-1.49 E.05938 G1 X-28.784 Y-10.015 E.0136 G1 X-28.129 Y-10.904 E.03662 G3 X-26.491 Y-11.476 I1.44 J1.49 E.05938 G1 X-26.164 Y-11.23 E.0136 G1 X-25.509 Y-10.341 E.03662 G2 X-23.871 Y-9.769 I1.44 J-1.49 E.05938 G1 X-23.543 Y-10.015 E.0136 G1 X-22.888 Y-10.904 E.03662 G3 X-21.25 Y-11.476 I1.44 J1.49 E.05938 G1 X-20.922 Y-11.23 E.0136 G1 X-20.267 Y-10.341 E.03662 G2 X-18.629 Y-9.769 I1.44 J-1.49 E.05938 G1 X-18.302 Y-10.015 E.0136 G1 X-17.647 Y-10.904 E.03662 G3 X-16.009 Y-11.476 I1.44 J1.49 E.05938 G1 X-15.681 Y-11.23 E.0136 G1 X-15.026 Y-10.341 E.03662 G2 X-13.388 Y-9.769 I1.44 J-1.49 E.05938 G1 X-13.06 Y-10.015 E.0136 G1 X-12.405 Y-10.904 E.03662 G3 X-10.767 Y-11.476 I1.44 J1.49 E.05938 G1 X-10.44 Y-11.23 E.0136 G1 X-9.785 Y-10.341 E.03662 G2 X-8.147 Y-9.769 I1.44 J-1.49 E.05938 G1 X-7.819 Y-10.015 E.0136 G1 X-7.164 Y-10.904 E.03662 G3 X-5.526 Y-11.476 I1.44 J1.49 E.05938 G1 X-5.198 Y-11.23 E.0136 G1 X-4.543 Y-10.341 E.03662 G2 X-2.905 Y-9.769 I1.44 J-1.49 E.05938 G1 X-2.578 Y-10.015 E.0136 G1 X-1.923 Y-10.904 E.03662 G3 X-.285 Y-11.476 I1.44 J1.49 E.05938 G1 X.043 Y-11.23 E.0136 G1 X.698 Y-10.341 E.03662 G2 X2.336 Y-9.769 I1.44 J-1.49 E.05938 G1 X2.663 Y-10.015 E.0136 G1 X3.319 Y-10.904 E.03662 G3 X4.957 Y-11.476 I1.44 J1.49 E.05938 G1 X5.284 Y-11.23 E.0136 G1 X5.939 Y-10.341 E.03662 G2 X7.577 Y-9.769 I1.44 J-1.49 E.05938 G1 X7.905 Y-10.015 E.0136 G1 X8.56 Y-10.904 E.03662 G3 X10.198 Y-11.476 I1.44 J1.49 E.05938 G1 X10.525 Y-11.23 E.0136 G1 X11.181 Y-10.341 E.03662 G2 X12.819 Y-9.769 I1.44 J-1.49 E.05938 G1 X13.146 Y-10.015 E.0136 G1 X13.801 Y-10.904 E.03662 G3 X15.439 Y-11.476 I1.44 J1.49 E.05938 G1 X15.767 Y-11.23 E.0136 G1 X16.422 Y-10.341 E.03662 G2 X18.06 Y-9.769 I1.44 J-1.49 E.05938 G1 X18.387 Y-10.015 E.0136 G1 X18.937 Y-10.761 E.03071 G1 X18.937 Y-14.123 E.11156 G2 X18.387 Y-13.85 I-.039 J.611 E.02132 G1 X17.732 Y-12.962 E.03662 G3 X16.094 Y-12.389 I-1.44 J-1.49 E.05938 G1 X15.767 Y-12.636 E.0136 G1 X15.112 Y-13.524 E.03662 G2 X13.474 Y-14.097 I-1.44 J1.49 E.05938 G1 X13.146 Y-13.85 E.0136 G1 X12.491 Y-12.962 E.03662 G3 X10.853 Y-12.389 I-1.44 J-1.49 E.05938 G1 X10.525 Y-12.636 E.0136 G1 X9.87 Y-13.524 E.03662 G2 X8.232 Y-14.097 I-1.44 J1.49 E.05938 G1 X7.905 Y-13.85 E.0136 G1 X7.25 Y-12.962 E.03662 G3 X5.612 Y-12.389 I-1.44 J-1.49 E.05938 G1 X5.284 Y-12.636 E.0136 G1 X4.629 Y-13.524 E.03662 G2 X2.991 Y-14.097 I-1.44 J1.49 E.05938 G1 X2.663 Y-13.85 E.0136 G1 X2.008 Y-12.962 E.03662 G3 X.37 Y-12.389 I-1.44 J-1.49 E.05938 G1 X.043 Y-12.636 E.0136 G1 X-.612 Y-13.524 E.03662 G2 X-2.25 Y-14.097 I-1.44 J1.49 E.05938 G1 X-2.578 Y-13.85 E.0136 G1 X-3.233 Y-12.962 E.03662 G3 X-4.871 Y-12.389 I-1.44 J-1.49 E.05938 G1 X-5.198 Y-12.636 E.0136 G1 X-5.854 Y-13.524 E.03662 G2 X-7.492 Y-14.097 I-1.44 J1.49 E.05938 G1 X-7.819 Y-13.85 E.0136 G1 X-8.474 Y-12.962 E.03662 G3 X-10.112 Y-12.389 I-1.44 J-1.49 E.05938 G1 X-10.44 Y-12.636 E.0136 G1 X-11.095 Y-13.524 E.03662 G2 X-12.733 Y-14.097 I-1.44 J1.49 E.05938 G1 X-13.06 Y-13.85 E.0136 G1 X-13.716 Y-12.962 E.03662 G3 X-15.354 Y-12.389 I-1.44 J-1.49 E.05938 G1 X-15.681 Y-12.636 E.0136 G1 X-16.336 Y-13.524 E.03662 G2 X-17.974 Y-14.097 I-1.44 J1.49 E.05938 G1 X-18.302 Y-13.85 E.0136 G1 X-18.957 Y-12.962 E.03662 G3 X-20.595 Y-12.389 I-1.44 J-1.49 E.05938 G1 X-20.922 Y-12.636 E.0136 G1 X-21.578 Y-13.524 E.03662 G2 X-23.215 Y-14.097 I-1.44 J1.49 E.05938 G1 X-23.543 Y-13.85 E.0136 G1 X-24.198 Y-12.962 E.03662 G3 X-25.836 Y-12.389 I-1.44 J-1.49 E.05938 G1 X-26.164 Y-12.636 E.0136 G1 X-26.819 Y-13.524 E.03662 G2 X-28.457 Y-14.097 I-1.44 J1.49 E.05938 G1 X-28.784 Y-13.85 E.0136 G1 X-29.44 Y-12.962 E.03662 G3 X-31.077 Y-12.389 I-1.44 J-1.49 E.05938 G1 X-31.405 Y-12.636 E.0136 G1 X-32.06 Y-13.524 E.03662 G2 X-33.698 Y-14.097 I-1.44 J1.49 E.05938 G1 X-34.026 Y-13.85 E.0136 G1 X-34.681 Y-12.962 E.03662 G3 X-36.319 Y-12.389 I-1.44 J-1.49 E.05938 G1 X-36.646 Y-12.636 E.0136 G1 X-37.301 Y-13.524 E.03662 G2 X-38.939 Y-14.097 I-1.44 J1.49 E.05938 G2 X-39.537 Y-13.484 I.726 J1.306 E.02879 G1 X-39.537 Y-15.053 E.05206 G1 X-39.267 Y-15.257 E.01121 G1 X-38.612 Y-16.145 E.03662 G3 X-36.974 Y-16.717 I1.44 J1.49 E.05938 G1 X-36.646 Y-16.471 E.0136 G1 X-35.991 Y-15.582 E.03662 G2 X-34.353 Y-15.01 I1.44 J-1.49 E.05938 G1 X-34.026 Y-15.257 E.0136 G1 X-33.37 Y-16.145 E.03662 G3 X-31.733 Y-16.717 I1.44 J1.49 E.05938 G1 X-31.405 Y-16.471 E.0136 G1 X-30.75 Y-15.582 E.03662 G2 X-29.112 Y-15.01 I1.44 J-1.49 E.05938 G1 X-28.784 Y-15.257 E.0136 G1 X-28.129 Y-16.145 E.03662 G3 X-26.491 Y-16.717 I1.44 J1.49 E.05938 G1 X-26.164 Y-16.471 E.0136 G1 X-25.509 Y-15.582 E.03662 G2 X-23.871 Y-15.01 I1.44 J-1.49 E.05938 G1 X-23.543 Y-15.257 E.0136 G1 X-22.888 Y-16.145 E.03662 G3 X-21.25 Y-16.717 I1.44 J1.49 E.05938 G1 X-20.922 Y-16.471 E.0136 G1 X-20.267 Y-15.582 E.03662 G2 X-18.629 Y-15.01 I1.44 J-1.49 E.05938 G1 X-18.302 Y-15.257 E.0136 G1 X-17.647 Y-16.145 E.03662 G3 X-16.009 Y-16.717 I1.44 J1.49 E.05938 G1 X-15.681 Y-16.471 E.0136 G1 X-15.026 Y-15.582 E.03662 G2 X-13.388 Y-15.01 I1.44 J-1.49 E.05938 G1 X-13.06 Y-15.257 E.0136 G1 X-12.405 Y-16.145 E.03662 G3 X-10.767 Y-16.717 I1.44 J1.49 E.05938 G1 X-10.44 Y-16.471 E.0136 G1 X-9.785 Y-15.582 E.03662 G2 X-8.147 Y-15.01 I1.44 J-1.49 E.05938 G1 X-7.819 Y-15.257 E.0136 G1 X-7.164 Y-16.145 E.03662 G3 X-5.526 Y-16.717 I1.44 J1.49 E.05938 G1 X-5.198 Y-16.471 E.0136 G1 X-4.543 Y-15.582 E.03662 G2 X-2.905 Y-15.01 I1.44 J-1.49 E.05938 G1 X-2.578 Y-15.257 E.0136 G1 X-1.923 Y-16.145 E.03662 G3 X-.285 Y-16.717 I1.44 J1.49 E.05938 G1 X.043 Y-16.471 E.0136 G1 X.698 Y-15.582 E.03662 G2 X2.336 Y-15.01 I1.44 J-1.49 E.05938 G1 X2.663 Y-15.257 E.0136 G1 X3.319 Y-16.145 E.03662 G3 X4.957 Y-16.717 I1.44 J1.49 E.05938 G1 X5.284 Y-16.471 E.0136 G1 X5.939 Y-15.582 E.03662 G2 X7.577 Y-15.01 I1.44 J-1.49 E.05938 G1 X7.905 Y-15.257 E.0136 G1 X8.56 Y-16.145 E.03662 G3 X10.198 Y-16.717 I1.44 J1.49 E.05938 G1 X10.525 Y-16.471 E.0136 G1 X11.181 Y-15.582 E.03662 G2 X12.819 Y-15.01 I1.44 J-1.49 E.05938 G1 X13.146 Y-15.257 E.0136 G1 X13.801 Y-16.145 E.03662 G3 X15.439 Y-16.717 I1.44 J1.49 E.05938 G1 X15.767 Y-16.471 E.0136 G1 X16.422 Y-15.582 E.03662 G2 X18.06 Y-15.01 I1.44 J-1.49 E.05938 G1 X18.387 Y-15.257 E.0136 G1 X18.937 Y-16.002 E.03071 G1 X18.937 Y-17.63 E.05401 G1 X18.937 Y-28.219 F30000 G1 F16200 G1 X18.937 Y-29.847 E.05401 G2 X18.387 Y-29.574 I-.039 J.611 E.02132 G1 X17.732 Y-28.686 E.03662 G3 X16.094 Y-28.113 I-1.44 J-1.49 E.05938 G1 X15.767 Y-28.36 E.0136 G1 X15.112 Y-29.248 E.03662 G2 X13.474 Y-29.821 I-1.44 J1.49 E.05938 G1 X13.146 Y-29.574 E.0136 G1 X12.491 Y-28.686 E.03662 G3 X10.853 Y-28.113 I-1.44 J-1.49 E.05938 G1 X10.525 Y-28.36 E.0136 G1 X9.87 Y-29.248 E.03662 G2 X8.232 Y-29.821 I-1.44 J1.49 E.05938 G1 X7.905 Y-29.574 E.0136 G1 X7.25 Y-28.686 E.03662 G3 X5.612 Y-28.113 I-1.44 J-1.49 E.05938 G1 X5.284 Y-28.36 E.0136 G1 X4.629 Y-29.248 E.03662 G2 X2.991 Y-29.821 I-1.44 J1.49 E.05938 G1 X2.663 Y-29.574 E.0136 G1 X2.008 Y-28.686 E.03662 G3 X.37 Y-28.113 I-1.44 J-1.49 E.05938 G1 X.043 Y-28.36 E.0136 G1 X-.612 Y-29.248 E.03662 G2 X-2.25 Y-29.821 I-1.44 J1.49 E.05938 G1 X-2.578 Y-29.574 E.0136 G1 X-3.233 Y-28.686 E.03662 G3 X-4.871 Y-28.113 I-1.44 J-1.49 E.05938 G1 X-5.198 Y-28.36 E.0136 G1 X-5.854 Y-29.248 E.03662 G2 X-7.492 Y-29.821 I-1.44 J1.49 E.05938 G1 X-7.819 Y-29.574 E.0136 G1 X-8.474 Y-28.686 E.03662 G3 X-10.112 Y-28.113 I-1.44 J-1.49 E.05938 G1 X-10.44 Y-28.36 E.0136 G1 X-11.095 Y-29.248 E.03662 G2 X-12.733 Y-29.821 I-1.44 J1.49 E.05938 G1 X-13.06 Y-29.574 E.0136 G1 X-13.716 Y-28.686 E.03662 G3 X-15.354 Y-28.113 I-1.44 J-1.49 E.05938 G1 X-15.681 Y-28.36 E.0136 G1 X-16.336 Y-29.248 E.03662 G2 X-17.974 Y-29.821 I-1.44 J1.49 E.05938 G1 X-18.302 Y-29.574 E.0136 G1 X-18.957 Y-28.686 E.03662 G3 X-20.595 Y-28.113 I-1.44 J-1.49 E.05938 G1 X-20.922 Y-28.36 E.0136 G1 X-21.578 Y-29.248 E.03662 G2 X-23.215 Y-29.821 I-1.44 J1.49 E.05938 G1 X-23.543 Y-29.574 E.0136 G1 X-24.198 Y-28.686 E.03662 G3 X-25.836 Y-28.113 I-1.44 J-1.49 E.05938 G1 X-26.164 Y-28.36 E.0136 G1 X-26.819 Y-29.248 E.03662 G2 X-28.457 Y-29.821 I-1.44 J1.49 E.05938 G1 X-28.784 Y-29.574 E.0136 G1 X-29.44 Y-28.686 E.03662 G3 X-31.077 Y-28.113 I-1.44 J-1.49 E.05938 G1 X-31.405 Y-28.36 E.0136 G1 X-32.06 Y-29.248 E.03662 G2 X-33.698 Y-29.821 I-1.44 J1.49 E.05938 G1 X-34.026 Y-29.574 E.0136 G1 X-34.681 Y-28.686 E.03662 G3 X-36.319 Y-28.113 I-1.44 J-1.49 E.05938 G1 X-36.646 Y-28.36 E.0136 G1 X-37.301 Y-29.248 E.03662 G2 X-38.939 Y-29.821 I-1.44 J1.49 E.05938 G2 X-39.537 Y-29.208 I.726 J1.306 E.02879 G1 X-39.537 Y-30.777 E.05206 G1 X-39.267 Y-30.98 E.01121 G1 X-38.612 Y-31.869 E.03662 G3 X-36.974 Y-32.441 I1.44 J1.49 E.05938 G1 X-36.646 Y-32.195 E.0136 G1 X-35.991 Y-31.306 E.03662 G2 X-34.353 Y-30.734 I1.44 J-1.49 E.05938 G1 X-34.026 Y-30.98 E.0136 G1 X-33.37 Y-31.869 E.03662 G3 X-31.733 Y-32.441 I1.44 J1.49 E.05938 G1 X-31.405 Y-32.195 E.0136 G1 X-30.75 Y-31.306 E.03662 G2 X-29.112 Y-30.734 I1.44 J-1.49 E.05938 G1 X-28.784 Y-30.98 E.0136 G1 X-28.129 Y-31.869 E.03662 G3 X-26.491 Y-32.441 I1.44 J1.49 E.05938 G1 X-26.164 Y-32.195 E.0136 G1 X-25.509 Y-31.306 E.03662 G2 X-23.871 Y-30.734 I1.44 J-1.49 E.05938 G1 X-23.543 Y-30.98 E.0136 G1 X-22.888 Y-31.869 E.03662 G3 X-21.25 Y-32.441 I1.44 J1.49 E.05938 G1 X-20.922 Y-32.195 E.0136 G1 X-20.267 Y-31.306 E.03662 G2 X-18.629 Y-30.734 I1.44 J-1.49 E.05938 G1 X-18.302 Y-30.98 E.0136 G1 X-17.647 Y-31.869 E.03662 G3 X-16.009 Y-32.441 I1.44 J1.49 E.05938 G1 X-15.681 Y-32.195 E.0136 G1 X-15.026 Y-31.306 E.03662 G2 X-13.388 Y-30.734 I1.44 J-1.49 E.05938 G1 X-13.06 Y-30.98 E.0136 G1 X-12.405 Y-31.869 E.03662 G3 X-10.767 Y-32.441 I1.44 J1.49 E.05938 G1 X-10.44 Y-32.195 E.0136 G1 X-9.785 Y-31.306 E.03662 G2 X-8.147 Y-30.734 I1.44 J-1.49 E.05938 G1 X-7.819 Y-30.98 E.0136 G1 X-7.164 Y-31.869 E.03662 G3 X-5.526 Y-32.441 I1.44 J1.49 E.05938 G1 X-5.198 Y-32.195 E.0136 G1 X-4.543 Y-31.306 E.03662 G2 X-2.905 Y-30.734 I1.44 J-1.49 E.05938 G1 X-2.578 Y-30.98 E.0136 G1 X-1.923 Y-31.869 E.03662 G3 X-.285 Y-32.441 I1.44 J1.49 E.05938 G1 X.043 Y-32.195 E.0136 G1 X.698 Y-31.306 E.03662 G2 X2.336 Y-30.734 I1.44 J-1.49 E.05938 G1 X2.663 Y-30.98 E.0136 G1 X3.319 Y-31.869 E.03662 G3 X4.957 Y-32.441 I1.44 J1.49 E.05938 G1 X5.284 Y-32.195 E.0136 G1 X5.939 Y-31.306 E.03662 G2 X7.577 Y-30.734 I1.44 J-1.49 E.05938 G1 X7.905 Y-30.98 E.0136 G1 X8.56 Y-31.869 E.03662 G3 X10.198 Y-32.441 I1.44 J1.49 E.05938 G1 X10.525 Y-32.195 E.0136 G1 X11.181 Y-31.306 E.03662 G2 X12.819 Y-30.734 I1.44 J-1.49 E.05938 G1 X13.146 Y-30.98 E.0136 G1 X13.801 Y-31.869 E.03662 G3 X15.439 Y-32.441 I1.44 J1.49 E.05938 G1 X15.767 Y-32.195 E.0136 G1 X16.422 Y-31.306 E.03662 G2 X18.06 Y-30.734 I1.44 J-1.49 E.05938 G1 X18.387 Y-30.98 E.0136 G1 X18.937 Y-31.726 E.03071 G1 X18.937 Y-33.354 E.05401 G1 X18.937 Y-43.943 F30000 G1 F16200 G1 X18.937 Y-45.571 E.05401 G2 X18.387 Y-45.298 I-.039 J.611 E.02132 G1 X17.732 Y-44.409 E.03662 G3 X16.422 Y-43.798 I-1.47 J-1.44 E.04902 G3 X15.767 Y-44.084 I-.081 J-.709 E.02484 G1 X15.112 Y-44.972 E.03662 G2 X13.801 Y-45.584 I-1.47 J1.44 E.04902 G2 X13.146 Y-45.298 I-.081 J.709 E.02484 G1 X12.491 Y-44.409 E.03662 G3 X11.181 Y-43.798 I-1.47 J-1.44 E.04902 G3 X10.525 Y-44.084 I-.081 J-.709 E.02484 G1 X9.87 Y-44.972 E.03662 G2 X8.56 Y-45.584 I-1.47 J1.44 E.04902 G2 X7.905 Y-45.298 I-.081 J.709 E.02484 G1 X7.25 Y-44.409 E.03662 G3 X5.939 Y-43.798 I-1.47 J-1.44 E.04902 G3 X5.284 Y-44.084 I-.081 J-.709 E.02484 G1 X4.629 Y-44.972 E.03662 G2 X3.319 Y-45.584 I-1.47 J1.44 E.04902 G2 X2.663 Y-45.298 I-.081 J.709 E.02484 G1 X2.008 Y-44.409 E.03662 G3 X.698 Y-43.798 I-1.47 J-1.44 E.04902 G3 X.043 Y-44.084 I-.081 J-.709 E.02484 G1 X-.612 Y-44.972 E.03662 G2 X-1.923 Y-45.584 I-1.47 J1.44 E.04902 G2 X-2.578 Y-45.298 I-.081 J.709 E.02484 G1 X-3.233 Y-44.409 E.03662 G3 X-4.543 Y-43.798 I-1.47 J-1.44 E.04902 G3 X-5.198 Y-44.084 I-.081 J-.709 E.02484 G1 X-5.854 Y-44.972 E.03662 G2 X-7.164 Y-45.584 I-1.47 J1.44 E.04902 G2 X-7.819 Y-45.298 I-.081 J.709 E.02484 G1 X-8.474 Y-44.409 E.03662 G3 X-9.785 Y-43.798 I-1.47 J-1.44 E.04902 G3 X-10.44 Y-44.084 I-.081 J-.709 E.02484 G1 X-11.095 Y-44.972 E.03662 G2 X-12.405 Y-45.584 I-1.47 J1.44 E.04902 G2 X-13.06 Y-45.298 I-.081 J.709 E.02484 G1 X-13.716 Y-44.409 E.03662 G3 X-15.026 Y-43.798 I-1.47 J-1.44 E.04902 G3 X-15.681 Y-44.084 I-.081 J-.709 E.02484 G1 X-16.336 Y-44.972 E.03662 G2 X-17.647 Y-45.584 I-1.47 J1.44 E.04902 G2 X-18.302 Y-45.298 I-.081 J.709 E.02484 G1 X-18.957 Y-44.409 E.03662 G3 X-20.267 Y-43.798 I-1.47 J-1.44 E.04902 G3 X-20.922 Y-44.084 I-.081 J-.709 E.02484 G1 X-21.578 Y-44.972 E.03662 G2 X-22.888 Y-45.584 I-1.47 J1.44 E.04902 G2 X-23.543 Y-45.298 I-.081 J.709 E.02484 G1 X-24.198 Y-44.409 E.03662 G3 X-25.509 Y-43.798 I-1.47 J-1.44 E.04902 G3 X-26.164 Y-44.084 I-.081 J-.709 E.02484 G1 X-26.819 Y-44.972 E.03662 G2 X-28.129 Y-45.584 I-1.47 J1.44 E.04902 G2 X-28.784 Y-45.298 I-.081 J.709 E.02484 G1 X-29.44 Y-44.409 E.03662 G3 X-30.75 Y-43.798 I-1.47 J-1.44 E.04902 G3 X-31.405 Y-44.084 I-.081 J-.709 E.02484 G1 X-32.06 Y-44.972 E.03662 G2 X-33.37 Y-45.584 I-1.47 J1.44 E.04902 G2 X-34.026 Y-45.298 I-.081 J.709 E.02484 G1 X-34.681 Y-44.409 E.03662 G3 X-35.991 Y-43.798 I-1.47 J-1.44 E.04902 G3 X-36.646 Y-44.084 I-.081 J-.709 E.02484 G1 X-37.301 Y-44.972 E.03662 G2 X-38.612 Y-45.584 I-1.47 J1.44 E.04902 G2 X-39.537 Y-44.932 I.1 J1.124 E.03933 G1 X-39.537 Y-46.501 E.05206 G1 X-39.267 Y-46.704 E.01121 G1 X-38.612 Y-47.593 E.03662 G3 X-37.301 Y-48.205 I1.47 J1.44 E.04902 G3 X-36.646 Y-47.919 I.081 J.709 E.02484 G1 X-35.991 Y-47.03 E.03662 G2 X-34.681 Y-46.418 I1.47 J-1.44 E.04902 G2 X-34.026 Y-46.704 I.081 J-.709 E.02484 G1 X-33.37 Y-47.593 E.03662 G3 X-32.06 Y-48.205 I1.47 J1.44 E.04902 G3 X-31.405 Y-47.919 I.081 J.709 E.02484 G1 X-30.75 Y-47.03 E.03662 G2 X-29.44 Y-46.418 I1.47 J-1.44 E.04902 G2 X-28.784 Y-46.704 I.081 J-.709 E.02484 G1 X-28.129 Y-47.593 E.03662 G3 X-26.819 Y-48.205 I1.47 J1.44 E.04902 G3 X-26.164 Y-47.919 I.081 J.709 E.02484 G1 X-25.509 Y-47.03 E.03662 G2 X-24.198 Y-46.418 I1.47 J-1.44 E.04902 G2 X-23.543 Y-46.704 I.081 J-.709 E.02484 G1 X-22.888 Y-47.593 E.03662 G3 X-21.578 Y-48.205 I1.47 J1.44 E.04902 G3 X-20.922 Y-47.919 I.081 J.709 E.02484 G1 X-20.267 Y-47.03 E.03662 G2 X-18.957 Y-46.418 I1.47 J-1.44 E.04902 G2 X-18.302 Y-46.704 I.081 J-.709 E.02484 G1 X-17.647 Y-47.593 E.03662 G3 X-16.336 Y-48.205 I1.47 J1.44 E.04902 G3 X-15.681 Y-47.919 I.081 J.709 E.02484 G1 X-15.026 Y-47.03 E.03662 G2 X-13.716 Y-46.418 I1.47 J-1.44 E.04902 M73 P29 R57 G2 X-13.06 Y-46.704 I.081 J-.709 E.02484 G1 X-12.405 Y-47.593 E.03662 G3 X-11.095 Y-48.205 I1.47 J1.44 E.04902 G3 X-10.44 Y-47.919 I.081 J.709 E.02484 G1 X-9.785 Y-47.03 E.03662 G2 X-8.474 Y-46.418 I1.47 J-1.44 E.04902 G2 X-7.819 Y-46.704 I.081 J-.709 E.02484 G1 X-7.164 Y-47.593 E.03662 G3 X-5.854 Y-48.205 I1.47 J1.44 E.04902 G3 X-5.198 Y-47.919 I.081 J.709 E.02484 G1 X-4.543 Y-47.03 E.03662 G2 X-3.233 Y-46.418 I1.47 J-1.44 E.04902 G2 X-2.578 Y-46.704 I.081 J-.709 E.02484 G1 X-1.923 Y-47.593 E.03662 G3 X-.612 Y-48.205 I1.47 J1.44 E.04902 G3 X.043 Y-47.919 I.081 J.709 E.02484 G1 X.698 Y-47.03 E.03662 G2 X2.008 Y-46.418 I1.47 J-1.44 E.04902 G2 X2.663 Y-46.704 I.081 J-.709 E.02484 G1 X3.319 Y-47.593 E.03662 G3 X4.629 Y-48.205 I1.47 J1.44 E.04902 G3 X5.284 Y-47.919 I.081 J.709 E.02484 G1 X5.939 Y-47.03 E.03662 G2 X7.25 Y-46.418 I1.47 J-1.44 E.04902 G2 X7.905 Y-46.704 I.081 J-.709 E.02484 G1 X8.56 Y-47.593 E.03662 G3 X9.87 Y-48.205 I1.47 J1.44 E.04902 G3 X10.525 Y-47.919 I.081 J.709 E.02484 G1 X11.181 Y-47.03 E.03662 G2 X12.491 Y-46.418 I1.47 J-1.44 E.04902 G2 X13.146 Y-46.704 I.081 J-.709 E.02484 G1 X13.801 Y-47.593 E.03662 G3 X15.112 Y-48.205 I1.47 J1.44 E.04902 G3 X15.767 Y-47.919 I.081 J.709 E.02484 G1 X16.422 Y-47.03 E.03662 G2 X17.732 Y-46.418 I1.47 J-1.44 E.04902 G2 X18.387 Y-46.704 I.081 J-.709 E.02484 G1 X18.937 Y-47.45 E.03071 G1 X18.937 Y-50.813 E.11156 G2 X18.387 Y-50.539 I-.039 J.611 E.02132 G1 X17.732 Y-49.651 E.03662 G3 X16.422 Y-49.039 I-1.47 J-1.44 E.04902 G3 X15.767 Y-49.325 I-.081 J-.709 E.02484 G1 X15.112 Y-50.214 E.03662 G2 X13.801 Y-50.825 I-1.47 J1.44 E.04902 G2 X13.146 Y-50.539 I-.081 J.709 E.02484 G1 X12.491 Y-49.651 E.03662 G3 X11.181 Y-49.039 I-1.47 J-1.44 E.04902 G3 X10.525 Y-49.325 I-.081 J-.709 E.02484 G1 X9.87 Y-50.214 E.03662 G2 X8.56 Y-50.825 I-1.47 J1.44 E.04902 G2 X7.905 Y-50.539 I-.081 J.709 E.02484 G1 X7.25 Y-49.651 E.03662 G3 X5.939 Y-49.039 I-1.47 J-1.44 E.04902 G3 X5.284 Y-49.325 I-.081 J-.709 E.02484 G1 X4.629 Y-50.214 E.03662 G2 X3.319 Y-50.825 I-1.47 J1.44 E.04902 G2 X2.663 Y-50.539 I-.081 J.709 E.02484 G1 X2.008 Y-49.651 E.03662 G3 X.698 Y-49.039 I-1.47 J-1.44 E.04902 G3 X.043 Y-49.325 I-.081 J-.709 E.02484 G1 X-.612 Y-50.214 E.03662 G2 X-1.923 Y-50.825 I-1.47 J1.44 E.04902 G2 X-2.578 Y-50.539 I-.081 J.709 E.02484 G1 X-3.233 Y-49.651 E.03662 G3 X-4.543 Y-49.039 I-1.47 J-1.44 E.04902 G3 X-5.198 Y-49.325 I-.081 J-.709 E.02484 G1 X-5.854 Y-50.214 E.03662 G2 X-7.164 Y-50.825 I-1.47 J1.44 E.04902 G2 X-7.819 Y-50.539 I-.081 J.709 E.02484 G1 X-8.474 Y-49.651 E.03662 G3 X-9.785 Y-49.039 I-1.47 J-1.44 E.04902 G3 X-10.44 Y-49.325 I-.081 J-.709 E.02484 G1 X-11.095 Y-50.214 E.03662 G2 X-12.405 Y-50.825 I-1.47 J1.44 E.04902 G2 X-13.06 Y-50.539 I-.081 J.709 E.02484 G1 X-13.716 Y-49.651 E.03662 G3 X-15.026 Y-49.039 I-1.47 J-1.44 E.04902 G3 X-15.681 Y-49.325 I-.081 J-.709 E.02484 G1 X-16.336 Y-50.214 E.03662 G2 X-17.647 Y-50.825 I-1.47 J1.44 E.04902 G2 X-18.302 Y-50.539 I-.081 J.709 E.02484 G1 X-18.957 Y-49.651 E.03662 G3 X-20.267 Y-49.039 I-1.47 J-1.44 E.04902 G3 X-20.922 Y-49.325 I-.081 J-.709 E.02484 G1 X-21.578 Y-50.214 E.03662 G2 X-22.888 Y-50.825 I-1.47 J1.44 E.04902 G2 X-23.543 Y-50.539 I-.081 J.709 E.02484 G1 X-24.198 Y-49.651 E.03662 G3 X-25.509 Y-49.039 I-1.47 J-1.44 E.04902 G3 X-26.164 Y-49.325 I-.081 J-.709 E.02484 G1 X-26.819 Y-50.214 E.03662 G2 X-28.129 Y-50.825 I-1.47 J1.44 E.04902 G2 X-28.784 Y-50.539 I-.081 J.709 E.02484 G1 X-29.44 Y-49.651 E.03662 G3 X-30.75 Y-49.039 I-1.47 J-1.44 E.04902 G3 X-31.405 Y-49.325 I-.081 J-.709 E.02484 G1 X-32.06 Y-50.214 E.03662 G2 X-33.37 Y-50.825 I-1.47 J1.44 E.04902 G2 X-34.026 Y-50.539 I-.081 J.709 E.02484 G1 X-34.681 Y-49.651 E.03662 G3 X-35.991 Y-49.039 I-1.47 J-1.44 E.04902 G3 X-36.646 Y-49.325 I-.081 J-.709 E.02484 G1 X-37.301 Y-50.214 E.03662 G2 X-38.612 Y-50.825 I-1.47 J1.44 E.04902 G2 X-39.537 Y-50.173 I.1 J1.124 E.03933 G1 X-39.537 Y-51.743 E.05206 G1 X-39.267 Y-51.946 E.01121 G1 X-38.612 Y-52.834 E.03662 G3 X-37.301 Y-53.446 I1.47 J1.44 E.04902 G3 X-36.646 Y-53.16 I.081 J.709 E.02484 G1 X-35.991 Y-52.271 E.03662 G2 X-34.681 Y-51.66 I1.47 J-1.44 E.04902 G2 X-34.026 Y-51.946 I.081 J-.709 E.02484 G1 X-33.442 Y-52.737 E.03261 G1 X-31.093 Y-52.737 E.07793 G2 X-29.44 Y-51.66 I2.018 J-1.29 E.06747 G2 X-28.784 Y-51.946 I.081 J-.709 E.02484 G1 X-28.201 Y-52.737 E.03261 G1 X-27.037 Y-52.737 E.03862 G1 X-27.037 Y-53.392 E.02174 G3 X-26.164 Y-53.16 I.262 J.774 E.03176 G1 X-25.509 Y-52.271 E.03662 G2 X-24.198 Y-51.66 I1.47 J-1.44 E.04902 G2 X-23.543 Y-51.946 I.081 J-.709 E.02484 G1 X-22.888 Y-52.834 E.03662 G3 X-21.578 Y-53.446 I1.47 J1.44 E.04902 G3 X-20.922 Y-53.16 I.081 J.709 E.02484 G1 X-20.267 Y-52.271 E.03662 G2 X-18.957 Y-51.66 I1.47 J-1.44 E.04902 G2 X-18.302 Y-51.946 I.081 J-.709 E.02484 G1 X-17.647 Y-52.834 E.03662 G3 X-16.336 Y-53.446 I1.47 J1.44 E.04902 G3 X-15.681 Y-53.16 I.081 J.709 E.02484 G1 X-15.026 Y-52.271 E.03662 G2 X-13.716 Y-51.66 I1.47 J-1.44 E.04902 G2 X-13.06 Y-51.946 I.081 J-.709 E.02484 G1 X-12.405 Y-52.834 E.03662 G3 X-11.095 Y-53.446 I1.47 J1.44 E.04902 G3 X-10.44 Y-53.16 I.081 J.709 E.02484 G1 X-9.785 Y-52.271 E.03662 G2 X-8.474 Y-51.66 I1.47 J-1.44 E.04902 G2 X-7.819 Y-51.946 I.081 J-.709 E.02484 G1 X-7.164 Y-52.834 E.03662 G3 X-5.854 Y-53.446 I1.47 J1.44 E.04902 G3 X-5.198 Y-53.16 I.081 J.709 E.02484 G1 X-4.543 Y-52.271 E.03662 G2 X-3.233 Y-51.66 I1.47 J-1.44 E.04902 G2 X-2.578 Y-51.946 I.081 J-.709 E.02484 G1 X-1.923 Y-52.834 E.03662 G3 X-.612 Y-53.446 I1.47 J1.44 E.04902 G3 X.043 Y-53.16 I.081 J.709 E.02484 G1 X.698 Y-52.271 E.03662 G2 X2.008 Y-51.66 I1.47 J-1.44 E.04902 G2 X2.663 Y-51.946 I.081 J-.709 E.02484 G1 X3.319 Y-52.834 E.03662 G3 X4.629 Y-53.446 I1.47 J1.44 E.04902 G3 X5.284 Y-53.16 I.081 J.709 E.02484 G1 X5.939 Y-52.271 E.03662 G2 X7.25 Y-51.66 I1.47 J-1.44 E.04902 G2 X7.905 Y-51.946 I.081 J-.709 E.02484 G1 X8.488 Y-52.737 E.03261 G1 X10.837 Y-52.737 E.07793 G2 X12.491 Y-51.66 I2.018 J-1.29 E.06747 G2 X13.146 Y-51.946 I.081 J-.709 E.02484 G1 X13.729 Y-52.737 E.03261 G1 X14.963 Y-52.737 E.04092 G1 X14.963 Y-53.409 E.02231 G3 X15.767 Y-53.16 I.199 J.779 E.02937 G1 X16.422 Y-52.271 E.03662 G2 X17.732 Y-51.66 I1.47 J-1.44 E.04902 G2 X18.387 Y-51.946 I.081 J-.709 E.02484 G1 X19.043 Y-52.834 E.03662 G3 X20.353 Y-53.446 I1.47 J1.44 E.04902 G3 X21.008 Y-53.16 I.081 J.709 E.02484 G1 X21.675 Y-52.263 E.03708 G1 X23.863 Y-52.263 E.07256 G3 X25.594 Y-53.446 I2.119 J1.243 E.07187 G3 X26.249 Y-53.16 I.081 J.709 E.02484 G1 X26.917 Y-52.263 E.03708 G1 X29.104 Y-52.263 E.07256 G3 X30.835 Y-53.446 I2.119 J1.243 E.07187 G1 X30.937 Y-53.434 E.00339 G1 X30.937 Y-55.317 E.06248 G2 X29.525 Y-56.067 I-1.813 J1.711 E.05397 G2 X28.87 Y-55.781 I-.081 J.709 E.02484 G1 X28.215 Y-54.892 E.03662 G3 X26.905 Y-54.28 I-1.47 J-1.44 E.04902 G3 X26.249 Y-54.566 I-.081 J-.709 E.02484 G1 X25.594 Y-55.455 E.03662 G2 X24.284 Y-56.067 I-1.47 J1.44 E.04902 G2 X23.629 Y-55.781 I-.081 J.709 E.02484 G1 X22.974 Y-54.892 E.03662 G3 X21.663 Y-54.28 I-1.47 J-1.44 E.04902 G3 X21.008 Y-54.566 I-.081 J-.709 E.02484 G1 X20.353 Y-55.455 E.03662 G2 X19.043 Y-56.067 I-1.47 J1.44 E.04902 G2 X18.387 Y-55.781 I-.081 J.709 E.02484 G1 X17.732 Y-54.892 E.03662 G3 X16.422 Y-54.28 I-1.47 J-1.44 E.04902 G3 X15.767 Y-54.566 I-.081 J-.709 E.02484 G1 X15.112 Y-55.455 E.03662 G1 X14.963 Y-55.557 E.00597 G1 X14.963 Y-57.185 E.05401 G1 X14.549 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X6.851 Y-60 E.19 G1 X6.437 Y-52.775 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X6.437 Y-54.403 E.05401 G3 X5.284 Y-54.566 I-.47 J-.837 E.04149 G1 X4.629 Y-55.455 E.03662 G2 X2.991 Y-56.027 I-1.44 J1.49 E.05938 G1 X2.663 Y-55.781 E.0136 G1 X2.008 Y-54.892 E.03662 G3 X.37 Y-54.32 I-1.44 J-1.49 E.05938 G1 X.043 Y-54.566 E.0136 G1 X-.612 Y-55.455 E.03662 G2 X-2.25 Y-56.027 I-1.44 J1.49 E.05938 G1 X-2.578 Y-55.781 E.0136 G1 X-3.233 Y-54.892 E.03662 G3 X-4.871 Y-54.32 I-1.44 J-1.49 E.05938 G1 X-5.198 Y-54.566 E.0136 G1 X-5.854 Y-55.455 E.03662 G2 X-7.492 Y-56.027 I-1.44 J1.49 E.05938 G1 X-7.819 Y-55.781 E.0136 G1 X-8.474 Y-54.892 E.03662 G3 X-10.112 Y-54.32 I-1.44 J-1.49 E.05938 G1 X-10.44 Y-54.566 E.0136 G1 X-11.095 Y-55.455 E.03662 G2 X-12.733 Y-56.027 I-1.44 J1.49 E.05938 G1 X-13.06 Y-55.781 E.0136 G1 X-13.716 Y-54.892 E.03662 G3 X-15.354 Y-54.32 I-1.44 J-1.49 E.05938 G1 X-15.681 Y-54.566 E.0136 G1 X-16.336 Y-55.455 E.03662 G2 X-17.974 Y-56.027 I-1.44 J1.49 E.05938 G1 X-18.302 Y-55.781 E.0136 G1 X-18.957 Y-54.892 E.03662 G3 X-20.595 Y-54.32 I-1.44 J-1.49 E.05938 G1 X-20.922 Y-54.566 E.0136 G1 X-21.578 Y-55.455 E.03662 G2 X-23.215 Y-56.027 I-1.44 J1.49 E.05938 G1 X-23.543 Y-55.781 E.0136 G1 X-24.198 Y-54.892 E.03662 G3 X-25.836 Y-54.32 I-1.44 J-1.49 E.05938 G1 X-26.164 Y-54.566 E.0136 G1 X-26.819 Y-55.455 E.03662 G1 X-27.037 Y-55.605 E.00877 G1 X-27.037 Y-57.233 E.05401 G1 X-27.451 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-35.149 Y-60 E.19 G1 X-35.563 Y-52.758 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.563 Y-54.386 E.05401 G3 X-36.646 Y-54.566 I-.421 J-.816 E.03905 G1 X-37.301 Y-55.455 E.03662 G2 X-38.612 Y-56.067 I-1.47 J1.44 E.04902 G2 X-39.267 Y-55.781 I-.081 J.709 E.02484 G1 X-39.922 Y-54.892 E.03662 G3 X-41.232 Y-54.28 I-1.47 J-1.44 E.04902 G3 X-41.888 Y-54.566 I-.081 J-.709 E.02484 G1 X-42.543 Y-55.455 E.03662 G2 X-43.853 Y-56.067 I-1.47 J1.44 E.04902 G2 X-44.508 Y-55.781 I-.081 J.709 E.02484 G1 X-45.163 Y-54.892 E.03662 G3 X-46.474 Y-54.28 I-1.47 J-1.44 E.04902 G3 X-47.129 Y-54.566 I-.081 J-.709 E.02484 G1 X-47.784 Y-55.455 E.03662 G2 X-49.094 Y-56.067 I-1.47 J1.44 E.04902 G2 X-49.75 Y-55.781 I-.081 J.709 E.02484 G1 X-50.405 Y-54.892 E.03662 G1 X-51.06 Y-54.442 E.02636 G1 X-51.537 Y-54.324 E.0163 G1 X-51.537 Y-52.263 E.06837 G1 X-49.516 Y-52.263 E.06705 G3 X-47.784 Y-53.446 I2.119 J1.243 E.07187 G3 X-47.129 Y-53.16 I.081 J.709 E.02484 G1 X-46.462 Y-52.263 E.03708 G1 X-44.274 Y-52.263 E.07256 G3 X-42.543 Y-53.446 I2.119 J1.243 E.07187 G3 X-41.888 Y-53.16 I.081 J.709 E.02484 G1 X-41.22 Y-52.263 E.03708 G1 X-42.849 Y-52.263 E.05401 G1 X-48.663 Y-59.737 F30000 G1 F16200 G1 X-47.035 Y-59.737 E.05401 G2 X-46.474 Y-59.522 I.466 J-.377 E.02088 G1 X-45.741 Y-59.737 E.02533 G1 X-41.794 Y-59.737 E.13094 G2 X-41.232 Y-59.522 I.466 J-.377 E.02088 G1 X-40.5 Y-59.737 E.02533 G1 X-36.552 Y-59.737 E.13094 G2 X-35.563 Y-59.627 I.574 J-.665 E.03509 G1 X-35.563 Y-57.219 E.0799 G1 X-35.991 Y-57.513 E.01722 G1 X-36.646 Y-58.401 E.03662 G2 X-37.301 Y-58.687 I-.575 J.423 E.02484 G2 X-38.612 Y-58.076 I.16 J2.051 E.04902 G1 X-39.267 Y-57.187 E.03662 G3 X-39.922 Y-56.901 I-.575 J-.423 E.02484 G3 X-41.232 Y-57.513 I.16 J-2.051 E.04902 G1 X-41.888 Y-58.401 E.03662 G2 X-42.543 Y-58.687 I-.575 J.423 E.02484 G2 X-43.853 Y-58.076 I.16 J2.051 E.04902 G1 X-44.508 Y-57.187 E.03662 G3 X-45.163 Y-56.901 I-.575 J-.423 E.02484 G3 X-46.474 Y-57.513 I.16 J-2.051 E.04902 G1 X-47.129 Y-58.401 E.03662 G2 X-47.784 Y-58.687 I-.575 J.423 E.02484 G2 X-49.094 Y-58.076 I.16 J2.051 E.04902 G1 X-49.75 Y-57.187 E.03662 G3 X-50.405 Y-56.901 I-.575 J-.423 E.02484 G3 X-51.537 Y-57.39 I.086 J-1.753 E.04181 G1 X-51.537 Y-59.566 E.07216 G2 X-50.982 Y-59.737 I.049 J-.824 E.01967 G1 X-49.354 Y-59.737 E.05401 G1 X-23.147 Y-59.737 F30000 G1 F16200 G1 X-24.776 Y-59.737 E.05401 G1 X-25.509 Y-59.522 E.02533 G3 X-26.07 Y-59.737 I-.095 J-.592 E.02088 G1 X-27.037 Y-59.737 E.03208 G1 X-27.037 Y-58.633 E.0366 G3 X-26.164 Y-58.401 I.262 J.774 E.03176 G1 X-25.509 Y-57.513 E.03662 G2 X-24.198 Y-56.901 I1.47 J-1.44 E.04902 G2 X-23.543 Y-57.187 I.081 J-.709 E.02484 G1 X-22.888 Y-58.076 E.03662 G3 X-21.578 Y-58.687 I1.47 J1.44 E.04902 G3 X-20.922 Y-58.401 I.081 J.709 E.02484 G1 X-20.267 Y-57.513 E.03662 G2 X-18.957 Y-56.901 I1.47 J-1.44 E.04902 G2 X-18.302 Y-57.187 I.081 J-.709 E.02484 G1 X-17.647 Y-58.076 E.03662 G3 X-16.336 Y-58.687 I1.47 J1.44 E.04902 G3 X-15.681 Y-58.401 I.081 J.709 E.02484 G1 X-15.026 Y-57.513 E.03662 G2 X-13.716 Y-56.901 I1.47 J-1.44 E.04902 G2 X-13.06 Y-57.187 I.081 J-.709 E.02484 G1 X-12.405 Y-58.076 E.03662 G3 X-11.095 Y-58.687 I1.47 J1.44 E.04902 G3 X-10.44 Y-58.401 I.081 J.709 E.02484 G1 X-9.785 Y-57.513 E.03662 G2 X-8.474 Y-56.901 I1.47 J-1.44 E.04902 G2 X-7.819 Y-57.187 I.081 J-.709 E.02484 G1 X-7.164 Y-58.076 E.03662 G3 X-5.854 Y-58.687 I1.47 J1.44 E.04902 G3 X-5.198 Y-58.401 I.081 J.709 E.02484 G1 X-4.543 Y-57.513 E.03662 G2 X-3.233 Y-56.901 I1.47 J-1.44 E.04902 G2 X-2.578 Y-57.187 I.081 J-.709 E.02484 G1 X-1.923 Y-58.076 E.03662 G3 X-.612 Y-58.687 I1.47 J1.44 E.04902 G3 X.043 Y-58.401 I.081 J.709 E.02484 G1 X.698 Y-57.513 E.03662 G2 X2.008 Y-56.901 I1.47 J-1.44 E.04902 G2 X2.663 Y-57.187 I.081 J-.709 E.02484 G1 X3.319 Y-58.076 E.03662 G3 X4.629 Y-58.687 I1.47 J1.44 E.04902 G3 X5.284 Y-58.401 I.081 J.709 E.02484 G1 X5.939 Y-57.513 E.03662 G1 X6.437 Y-57.171 E.02002 G1 X6.437 Y-59.645 E.08205 G3 X5.378 Y-59.737 I-.464 J-.8 E.03756 G1 X1.431 Y-59.737 E.13094 G1 X.698 Y-59.522 E.02533 G3 X.137 Y-59.737 I-.095 J-.592 E.02088 G1 X-3.811 Y-59.737 E.13094 G1 X-4.543 Y-59.522 E.02533 G3 X-5.104 Y-59.737 I-.095 J-.592 E.02088 G1 X-9.052 Y-59.737 E.13094 G1 X-9.785 Y-59.522 E.02533 G3 X-10.346 Y-59.737 I-.095 J-.592 E.02088 G1 X-14.293 Y-59.737 E.13094 G1 X-15.026 Y-59.522 E.02533 G3 X-15.587 Y-59.737 I-.095 J-.592 E.02088 G1 X-19.534 Y-59.737 E.13094 G1 X-20.267 Y-59.522 E.02533 G3 X-20.828 Y-59.737 I-.095 J-.592 E.02088 G1 X-22.457 Y-59.737 E.05401 G1 X-19.565 Y-36.946 F30000 G1 F16200 G2 X-17.992 Y-36.642 I1.369 J-2.866 E.05374 G3 X-18.629 Y-35.975 I-1.435 J-.734 E.03105 G3 X-20.267 Y-36.547 I-.198 J-2.062 E.05938 G1 X-20.922 Y-37.436 E.03662 G1 X-21.25 Y-37.683 E.0136 G2 X-22.888 Y-37.11 I-.198 J2.062 E.05938 G1 X-23.543 Y-36.222 E.03662 G1 X-23.871 Y-35.975 E.0136 G3 X-25.509 Y-36.547 I-.198 J-2.062 E.05938 G1 X-26.164 Y-37.436 E.03662 G1 X-26.491 Y-37.683 E.0136 G2 X-28.129 Y-37.11 I-.198 J2.062 E.05938 G1 X-28.784 Y-36.222 E.03662 G1 X-29.112 Y-35.975 E.0136 G3 X-30.75 Y-36.547 I-.198 J-2.062 E.05938 G1 X-31.405 Y-37.436 E.03662 G1 X-31.733 Y-37.683 E.0136 G2 X-33.37 Y-37.11 I-.198 J2.062 E.05938 G1 X-34.026 Y-36.222 E.03662 G1 X-34.353 Y-35.975 E.0136 G3 X-35.777 Y-36.4 I-.209 J-1.897 E.05061 G3 X-38.413 Y-37.247 I-.521 J-2.905 E.09561 G1 X-38.612 Y-37.11 E.008 G1 X-39.267 Y-36.222 E.03662 G1 X-39.537 Y-36.019 E.01121 G1 X-39.537 Y-34.449 E.05206 G3 X-38.939 Y-35.062 I1.324 J.694 E.02879 G3 X-37.301 Y-34.49 I.198 J2.062 E.05938 G1 X-36.646 Y-33.601 E.03662 G1 X-36.319 Y-33.355 E.0136 G2 X-34.681 Y-33.927 I.198 J-2.062 E.05938 G1 X-34.026 Y-34.815 E.03662 G1 X-33.698 Y-35.062 E.0136 G3 X-32.06 Y-34.49 I.198 J2.062 E.05938 G1 X-31.405 Y-33.601 E.03662 G1 X-31.077 Y-33.355 E.0136 G2 X-29.44 Y-33.927 I.198 J-2.062 E.05938 G1 X-28.784 Y-34.815 E.03662 G1 X-28.457 Y-35.062 E.0136 G3 X-26.819 Y-34.49 I.198 J2.062 E.05938 G1 X-26.164 Y-33.601 E.03662 G1 X-25.836 Y-33.355 E.0136 G2 X-24.198 Y-33.927 I.198 J-2.062 E.05938 G1 X-23.543 Y-34.815 E.03662 G1 X-23.215 Y-35.062 E.0136 G3 X-21.578 Y-34.49 I.198 J2.062 E.05938 G1 X-20.922 Y-33.601 E.03662 G1 X-20.595 Y-33.355 E.0136 G2 X-18.957 Y-33.927 I.198 J-2.062 E.05938 G1 X-18.302 Y-34.815 E.03662 G1 X-17.974 Y-35.062 E.0136 G3 X-16.336 Y-34.49 I.198 J2.062 E.05938 G1 X-15.681 Y-33.601 E.03662 G1 X-15.354 Y-33.355 E.0136 G2 X-13.716 Y-33.927 I.198 J-2.062 E.05938 G1 X-13.06 Y-34.815 E.03662 G1 X-12.733 Y-35.062 E.0136 G3 X-11.095 Y-34.49 I.198 J2.062 E.05938 G1 X-10.44 Y-33.601 E.03662 G1 X-10.112 Y-33.355 E.0136 G2 X-8.474 Y-33.927 I.198 J-2.062 E.05938 G1 X-7.819 Y-34.815 E.03662 G1 X-7.492 Y-35.062 E.0136 G3 X-5.854 Y-34.49 I.198 J2.062 E.05938 G1 X-5.198 Y-33.601 E.03662 G1 X-4.871 Y-33.355 E.0136 G2 X-3.233 Y-33.927 I.198 J-2.062 E.05938 G1 X-2.578 Y-34.815 E.03662 G1 X-2.25 Y-35.062 E.0136 G3 X-.612 Y-34.49 I.198 J2.062 E.05938 G1 X.043 Y-33.601 E.03662 G1 X.37 Y-33.355 E.0136 G2 X2.008 Y-33.927 I.198 J-2.062 E.05938 G1 X2.663 Y-34.815 E.03662 G1 X2.991 Y-35.062 E.0136 G3 X4.629 Y-34.49 I.198 J2.062 E.05938 G1 X5.284 Y-33.601 E.03662 G1 X5.612 Y-33.355 E.0136 G2 X7.25 Y-33.927 I.198 J-2.062 E.05938 G1 X7.905 Y-34.815 E.03662 G1 X8.232 Y-35.062 E.0136 G3 X9.87 Y-34.49 I.198 J2.062 E.05938 G1 X10.525 Y-33.601 E.03662 G1 X10.853 Y-33.355 E.0136 G2 X12.491 Y-33.927 I.198 J-2.062 E.05938 G1 X13.146 Y-34.815 E.03662 G1 X13.474 Y-35.062 E.0136 G3 X15.112 Y-34.49 I.198 J2.062 E.05938 G1 X15.767 Y-33.601 E.03662 G1 X16.094 Y-33.355 E.0136 G2 X17.732 Y-33.927 I.198 J-2.062 E.05938 G1 X18.387 Y-34.815 E.03662 G3 X18.937 Y-35.089 I.511 J.338 E.02132 G1 X18.937 Y-36.967 E.06231 G1 X18.387 Y-36.222 E.03071 G1 X18.06 Y-35.975 E.0136 G3 X16.422 Y-36.547 I-.198 J-2.062 E.05938 G1 X15.767 Y-37.436 E.03662 G1 X15.439 Y-37.683 E.0136 G2 X13.801 Y-37.11 I-.198 J2.062 E.05938 G1 X13.146 Y-36.222 E.03662 G1 X12.819 Y-35.975 E.0136 G3 X11.181 Y-36.547 I-.198 J-2.062 E.05938 G1 X10.525 Y-37.436 E.03662 G1 X10.198 Y-37.683 E.0136 G2 X8.56 Y-37.11 I-.198 J2.062 E.05938 G1 X7.905 Y-36.222 E.03662 G1 X7.577 Y-35.975 E.0136 G3 X5.939 Y-36.547 I-.198 J-2.062 E.05938 G1 X5.284 Y-37.436 E.03662 G1 X4.957 Y-37.683 E.0136 G2 X3.319 Y-37.11 I-.198 J2.062 E.05938 G1 X2.663 Y-36.222 E.03662 G1 X2.336 Y-35.975 E.0136 G3 X.698 Y-36.547 I-.198 J-2.062 E.05938 G1 X.043 Y-37.436 E.03662 G1 X-.285 Y-37.683 E.0136 G2 X-1.923 Y-37.11 I-.198 J2.062 E.05938 G1 X-2.578 Y-36.222 E.03662 G1 X-2.905 Y-35.975 E.0136 G3 X-4.543 Y-36.547 I-.198 J-2.062 E.05938 G1 X-5.198 Y-37.436 E.03662 G1 X-5.526 Y-37.683 E.0136 G2 X-7.164 Y-37.11 I-.198 J2.062 E.05938 G1 X-7.819 Y-36.222 E.03662 G1 X-8.147 Y-35.975 E.0136 G3 X-9.785 Y-36.547 I-.198 J-2.062 E.05938 G1 X-10.44 Y-37.436 E.03662 G1 X-10.767 Y-37.683 E.0136 G2 X-12.405 Y-37.11 I-.198 J2.062 E.05938 G1 X-13.06 Y-36.222 E.03662 G1 X-13.388 Y-35.975 E.0136 G3 X-15.026 Y-36.547 I-.198 J-2.062 E.05938 G1 X-15.681 Y-37.436 E.03662 G2 X-16.161 Y-37.701 I-.469 J.282 E.01905 G2 X-15.677 Y-38.839 I-3.014 J-1.954 E.04124 G1 X-15.354 Y-38.596 E.01343 G2 X-13.716 Y-39.168 I.198 J-2.062 E.05938 G1 X-13.06 Y-40.057 E.03662 G1 X-12.733 Y-40.303 E.0136 G3 X-11.095 Y-39.731 I.198 J2.062 E.05938 G1 X-10.44 Y-38.842 E.03662 G1 X-10.112 Y-38.596 E.0136 G2 X-8.474 Y-39.168 I.198 J-2.062 E.05938 G1 X-7.819 Y-40.057 E.03662 G1 X-7.492 Y-40.303 E.0136 G3 X-5.854 Y-39.731 I.198 J2.062 E.05938 G1 X-5.198 Y-38.842 E.03662 G1 X-4.871 Y-38.596 E.0136 G2 X-3.233 Y-39.168 I.198 J-2.062 E.05938 G1 X-2.578 Y-40.057 E.03662 G1 X-2.25 Y-40.303 E.0136 G3 X-.612 Y-39.731 I.198 J2.062 E.05938 G1 X.043 Y-38.842 E.03662 G1 X.37 Y-38.596 E.0136 G2 X2.008 Y-39.168 I.198 J-2.062 E.05938 G1 X2.663 Y-40.057 E.03662 G1 X2.991 Y-40.303 E.0136 G3 X4.629 Y-39.731 I.198 J2.062 E.05938 G1 X5.284 Y-38.842 E.03662 G1 X5.612 Y-38.596 E.0136 G2 X7.25 Y-39.168 I.198 J-2.062 E.05938 G1 X7.905 Y-40.057 E.03662 G1 X8.232 Y-40.303 E.0136 G3 X9.87 Y-39.731 I.198 J2.062 E.05938 G1 X10.525 Y-38.842 E.03662 G1 X10.853 Y-38.596 E.0136 G2 X12.491 Y-39.168 I.198 J-2.062 E.05938 G1 X13.146 Y-40.057 E.03662 G1 X13.474 Y-40.303 E.0136 G3 X15.112 Y-39.731 I.198 J2.062 E.05938 G1 X15.767 Y-38.842 E.03662 G1 X16.094 Y-38.596 E.0136 G2 X17.732 Y-39.168 I.198 J-2.062 E.05938 G1 X18.387 Y-40.057 E.03662 G3 X18.937 Y-40.33 I.511 J.338 E.02132 G1 X18.937 Y-42.208 E.06231 G1 X18.387 Y-41.463 E.03071 G1 X18.06 Y-41.217 E.0136 G3 X16.422 Y-41.789 I-.198 J-2.062 E.05938 G1 X15.767 Y-42.677 E.03662 G1 X15.439 Y-42.924 E.0136 G2 X13.801 Y-42.352 I-.198 J2.062 E.05938 G1 X13.146 Y-41.463 E.03662 G1 X12.819 Y-41.217 E.0136 G3 X11.181 Y-41.789 I-.198 J-2.062 E.05938 G1 X10.525 Y-42.677 E.03662 G1 X10.198 Y-42.924 E.0136 G2 X8.56 Y-42.352 I-.198 J2.062 E.05938 G1 X7.905 Y-41.463 E.03662 G1 X7.577 Y-41.217 E.0136 G3 X5.939 Y-41.789 I-.198 J-2.062 E.05938 G1 X5.284 Y-42.677 E.03662 G1 X4.957 Y-42.924 E.0136 G2 X3.319 Y-42.352 I-.198 J2.062 E.05938 G1 X2.663 Y-41.463 E.03662 G1 X2.336 Y-41.217 E.0136 G3 X.698 Y-41.789 I-.198 J-2.062 E.05938 G1 X.043 Y-42.677 E.03662 G1 X-.285 Y-42.924 E.0136 G2 X-1.923 Y-42.352 I-.198 J2.062 E.05938 G1 X-2.578 Y-41.463 E.03662 G1 X-2.905 Y-41.217 E.0136 G3 X-4.543 Y-41.789 I-.198 J-2.062 E.05938 G1 X-5.198 Y-42.677 E.03662 G1 X-5.526 Y-42.924 E.0136 G2 X-7.164 Y-42.352 I-.198 J2.062 E.05938 G1 X-7.819 Y-41.463 E.03662 G1 X-8.147 Y-41.217 E.0136 G3 X-9.785 Y-41.789 I-.198 J-2.062 E.05938 G1 X-10.44 Y-42.677 E.03662 G1 X-10.767 Y-42.924 E.0136 G2 X-12.405 Y-42.352 I-.198 J2.062 E.05938 G1 X-13.06 Y-41.463 E.03662 G1 X-13.388 Y-41.217 E.0136 G3 X-15.026 Y-41.789 I-.198 J-2.062 E.05938 G1 X-15.681 Y-42.677 E.03662 G1 X-16.009 Y-42.924 E.0136 G2 X-17.647 Y-42.352 I-.198 J2.062 E.05938 G1 X-17.956 Y-41.931 E.01732 G2 X-19.813 Y-41.477 I-.325 J2.689 E.06479 G1 X-20.267 Y-41.789 E.01829 G1 X-20.922 Y-42.677 E.03662 G1 X-21.25 Y-42.924 E.0136 G2 X-22.888 Y-42.352 I-.198 J2.062 E.05938 G1 X-23.543 Y-41.463 E.03662 G1 X-23.871 Y-41.217 E.0136 G3 X-25.509 Y-41.789 I-.198 J-2.062 E.05938 G1 X-26.164 Y-42.677 E.03662 G1 X-26.491 Y-42.924 E.0136 G2 X-28.129 Y-42.352 I-.198 J2.062 E.05938 G1 X-28.784 Y-41.463 E.03662 G1 X-29.112 Y-41.217 E.0136 G3 X-30.75 Y-41.789 I-.198 J-2.062 E.05938 G1 X-31.405 Y-42.677 E.03662 G1 X-31.733 Y-42.924 E.0136 G2 X-33.37 Y-42.352 I-.198 J2.062 E.05938 G1 X-34.026 Y-41.463 E.03662 G1 X-34.194 Y-41.337 E.00697 G3 X-33.552 Y-40.321 I-3.491 J2.916 E.03998 G3 X-32.06 Y-39.731 I.006 J2.165 E.0545 G1 X-31.405 Y-38.842 E.03662 G1 X-31.077 Y-38.596 E.0136 G2 X-29.44 Y-39.168 I.198 J-2.062 E.05938 G1 X-28.784 Y-40.057 E.03662 G1 X-28.457 Y-40.303 E.0136 G3 X-26.819 Y-39.731 I.198 J2.062 E.05938 G1 X-26.164 Y-38.842 E.03662 G1 X-25.836 Y-38.596 E.0136 G2 X-24.198 Y-39.168 I.198 J-2.062 E.05938 G1 X-23.543 Y-40.057 E.03662 G1 X-23.215 Y-40.303 E.0136 G3 X-21.578 Y-39.731 I.198 J2.062 E.05938 G1 X-20.924 Y-38.845 E.03653 G3 X-20.703 Y-40.43 I2.613 J-.444 E.05395 G1 X-39.537 Y-42.888 F30000 G1 F16200 G1 X-39.537 Y-41.26 E.05401 G1 X-39.267 Y-41.463 E.01121 G1 X-38.612 Y-42.352 E.03662 G3 X-37.301 Y-42.963 I1.47 J1.44 E.04902 G3 X-36.315 Y-42.228 I-.123 J1.195 E.04286 G2 X-37.858 Y-41.776 I.045 J3.017 E.05398 G1 X-39.285 Y-40.405 F30000 ;TYPE:Gap infill ;WIDTH:0.475339 G1 F12000 G2 X-39.337 Y-40.088 I4.842 J.948 E.01132 ;WIDTH:0.439026 G1 X-39.356 Y-39.896 E.00622 ;WIDTH:0.399138 G2 X-39.376 Y-39.682 I3.263 J.418 E.00624 ;WIDTH:0.366947 G2 X-39.375 Y-38.872 I8.955 J.389 E.02139 ;WIDTH:0.401235 G1 X-39.356 Y-38.68 E.00563 ;WIDTH:0.441845 G2 X-39.333 Y-38.461 I3.346 J-.233 E.00717 ;WIDTH:0.465136 G1 X-39.285 Y-38.171 E.0101 G1 X-39.285 Y-22.405 F30000 ;WIDTH:0.475338 G1 F12000 G2 X-39.337 Y-22.088 I4.835 J.947 E.01132 ;WIDTH:0.439026 G1 X-39.356 Y-21.896 E.00622 ;WIDTH:0.399137 G2 X-39.376 Y-21.682 I3.263 J.418 E.00624 ;WIDTH:0.366947 G2 X-39.375 Y-20.872 I8.954 J.389 E.02139 ;WIDTH:0.401236 G1 X-39.356 Y-20.68 E.00563 ;WIDTH:0.441844 G2 X-39.333 Y-20.461 I3.344 J-.232 E.00717 ;WIDTH:0.465137 G1 X-39.285 Y-20.171 E.0101 G1 X-39.537 Y-17.097 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-39.537 Y-18.725 E.05401 G3 X-38.612 Y-19.378 I1.025 J.471 E.03933 G3 X-37.77 Y-18.741 I-6.943 J10.056 E.035 G2 X-37.069 Y-18.45 I1.457 J-2.52 E.02528 G2 X-36.319 Y-17.631 I1.746 J-.845 E.03737 G1 X-35.991 Y-17.591 E.01095 G2 X-34.681 Y-18.203 I-.16 J-2.051 E.04902 G1 X-34.026 Y-19.091 E.03662 G3 X-33.37 Y-19.378 I.575 J.423 E.02484 G3 X-32.06 Y-18.766 I-.16 J2.051 E.04902 G1 X-31.405 Y-17.877 E.03662 G2 X-30.75 Y-17.591 I.575 J-.423 E.02484 G2 X-29.44 Y-18.203 I-.16 J-2.051 E.04902 G1 X-28.784 Y-19.091 E.03662 G3 X-28.129 Y-19.378 I.575 J.423 E.02484 G3 X-26.819 Y-18.766 I-.16 J2.051 E.04902 G1 X-26.164 Y-17.877 E.03662 G2 X-25.509 Y-17.591 I.575 J-.423 E.02484 G2 X-24.198 Y-18.203 I-.16 J-2.051 E.04902 G1 X-23.543 Y-19.091 E.03662 G3 X-22.888 Y-19.378 I.575 J.423 E.02484 G3 X-21.578 Y-18.766 I-.16 J2.051 E.04902 G1 X-20.922 Y-17.877 E.03662 G2 X-20.267 Y-17.591 I.575 J-.423 E.02484 G2 X-18.632 Y-18.644 I-.36 J-2.356 E.06646 G1 X-18.462 Y-18.633 E.00565 G2 X-16.805 Y-19.088 I.168 J-2.634 E.05804 G1 X-16.336 Y-18.766 E.01887 G1 X-15.681 Y-17.877 E.03662 G2 X-15.026 Y-17.591 I.575 J-.423 E.02484 G2 X-13.716 Y-18.203 I-.16 J-2.051 E.04902 G1 X-13.06 Y-19.091 E.03662 G3 X-12.405 Y-19.378 I.575 J.423 E.02484 G3 X-11.095 Y-18.766 I-.16 J2.051 E.04902 G1 X-10.44 Y-17.877 E.03662 G2 X-9.785 Y-17.591 I.575 J-.423 E.02484 G2 X-8.474 Y-18.203 I-.16 J-2.051 E.04902 G1 X-7.819 Y-19.091 E.03662 G3 X-7.164 Y-19.378 I.575 J.423 E.02484 G3 X-5.854 Y-18.766 I-.16 J2.051 E.04902 G1 X-5.198 Y-17.877 E.03662 G2 X-4.543 Y-17.591 I.575 J-.423 E.02484 G2 X-3.233 Y-18.203 I-.16 J-2.051 E.04902 G1 X-2.578 Y-19.091 E.03662 G3 X-1.923 Y-19.378 I.575 J.423 E.02484 G3 X-.612 Y-18.766 I-.16 J2.051 E.04902 G1 X.043 Y-17.877 E.03662 G2 X.698 Y-17.591 I.575 J-.423 E.02484 G2 X2.008 Y-18.203 I-.16 J-2.051 E.04902 G1 X2.663 Y-19.091 E.03662 G3 X3.319 Y-19.378 I.575 J.423 E.02484 G3 X4.629 Y-18.766 I-.16 J2.051 E.04902 G1 X5.284 Y-17.877 E.03662 G2 X5.939 Y-17.591 I.575 J-.423 E.02484 G2 X7.25 Y-18.203 I-.16 J-2.051 E.04902 G1 X7.905 Y-19.091 E.03662 G3 X8.56 Y-19.378 I.575 J.423 E.02484 G3 X9.87 Y-18.766 I-.16 J2.051 E.04902 G1 X10.525 Y-17.877 E.03662 G2 X11.181 Y-17.591 I.575 J-.423 E.02484 G2 X12.491 Y-18.203 I-.16 J-2.051 E.04902 G1 X13.146 Y-19.091 E.03662 G3 X13.801 Y-19.378 I.575 J.423 E.02484 G3 X15.112 Y-18.766 I-.16 J2.051 E.04902 G1 X15.767 Y-17.877 E.03662 G2 X16.422 Y-17.591 I.575 J-.423 E.02484 G2 X17.732 Y-18.203 I-.16 J-2.051 E.04902 G1 X18.387 Y-19.091 E.03662 G3 X18.937 Y-19.365 I.511 J.338 E.02132 G1 X18.937 Y-21.243 E.06231 G1 X18.387 Y-20.498 E.03071 G3 X17.732 Y-20.212 I-.575 J-.423 E.02484 G3 X16.422 Y-20.824 I.16 J-2.051 E.04902 G1 X15.767 Y-21.712 E.03662 G2 X15.112 Y-21.998 I-.575 J.423 E.02484 G2 X13.801 Y-21.386 I.16 J2.051 E.04902 G1 X13.146 Y-20.498 E.03662 G3 X12.491 Y-20.212 I-.575 J-.423 E.02484 G3 X11.181 Y-20.824 I.16 J-2.051 E.04902 G1 X10.525 Y-21.712 E.03662 G2 X9.87 Y-21.998 I-.575 J.423 E.02484 G2 X8.56 Y-21.386 I.16 J2.051 E.04902 G1 X7.905 Y-20.498 E.03662 G3 X7.25 Y-20.212 I-.575 J-.423 E.02484 G3 X5.939 Y-20.824 I.16 J-2.051 E.04902 G1 X5.284 Y-21.712 E.03662 G2 X4.629 Y-21.998 I-.575 J.423 E.02484 G2 X3.319 Y-21.386 I.16 J2.051 E.04902 G1 X2.663 Y-20.498 E.03662 G3 X2.008 Y-20.212 I-.575 J-.423 E.02484 G3 X.698 Y-20.824 I.16 J-2.051 E.04902 G1 X.043 Y-21.712 E.03662 G2 X-.612 Y-21.998 I-.575 J.423 E.02484 G2 X-1.923 Y-21.386 I.16 J2.051 E.04902 G1 X-2.578 Y-20.498 E.03662 G3 X-3.233 Y-20.212 I-.575 J-.423 E.02484 G3 X-4.543 Y-20.824 I.16 J-2.051 E.04902 G1 X-5.198 Y-21.712 E.03662 G2 X-5.854 Y-21.998 I-.575 J.423 E.02484 G2 X-7.164 Y-21.386 I.16 J2.051 E.04902 G1 X-7.819 Y-20.498 E.03662 G3 X-8.474 Y-20.212 I-.575 J-.423 E.02484 G3 X-9.785 Y-20.824 I.16 J-2.051 E.04902 G1 X-10.44 Y-21.712 E.03662 G2 X-11.095 Y-21.998 I-.575 J.423 E.02484 G2 X-12.405 Y-21.386 I.16 J2.051 E.04902 G1 X-13.06 Y-20.498 E.03662 G3 X-13.716 Y-20.212 I-.575 J-.423 E.02484 G3 X-15.026 Y-20.824 I.16 J-2.051 E.04902 G1 X-15.669 Y-21.695 E.03593 G2 X-18.595 Y-23.935 I-2.661 J.446 E.13455 G3 X-17.647 Y-24.619 I1.057 J.466 E.04069 G3 X-16.336 Y-24.007 I-.16 J2.051 E.04902 G1 X-15.681 Y-23.119 E.03662 G2 X-15.026 Y-22.832 I.575 J-.423 E.02484 G2 X-13.716 Y-23.444 I-.16 J-2.051 E.04902 G1 X-13.06 Y-24.333 E.03662 G3 X-12.405 Y-24.619 I.575 J.423 E.02484 G3 X-11.095 Y-24.007 I-.16 J2.051 E.04902 G1 X-10.44 Y-23.119 E.03662 G2 X-9.785 Y-22.832 I.575 J-.423 E.02484 G2 X-8.474 Y-23.444 I-.16 J-2.051 E.04902 G1 X-7.819 Y-24.333 E.03662 G3 X-7.164 Y-24.619 I.575 J.423 E.02484 G3 X-5.854 Y-24.007 I-.16 J2.051 E.04902 G1 X-5.198 Y-23.119 E.03662 G2 X-4.543 Y-22.832 I.575 J-.423 E.02484 G2 X-3.233 Y-23.444 I-.16 J-2.051 E.04902 G1 X-2.578 Y-24.333 E.03662 G3 X-1.923 Y-24.619 I.575 J.423 E.02484 G3 X-.612 Y-24.007 I-.16 J2.051 E.04902 G1 X.043 Y-23.119 E.03662 G2 X.698 Y-22.832 I.575 J-.423 E.02484 G2 X2.008 Y-23.444 I-.16 J-2.051 E.04902 G1 X2.663 Y-24.333 E.03662 G3 X3.319 Y-24.619 I.575 J.423 E.02484 G3 X4.629 Y-24.007 I-.16 J2.051 E.04902 G1 X5.284 Y-23.119 E.03662 G2 X5.939 Y-22.832 I.575 J-.423 E.02484 G2 X7.25 Y-23.444 I-.16 J-2.051 E.04902 G1 X7.905 Y-24.333 E.03662 G3 X8.56 Y-24.619 I.575 J.423 E.02484 G3 X9.87 Y-24.007 I-.16 J2.051 E.04902 G1 X10.525 Y-23.119 E.03662 G2 X11.181 Y-22.832 I.575 J-.423 E.02484 G2 X12.491 Y-23.444 I-.16 J-2.051 E.04902 G1 X13.146 Y-24.333 E.03662 G3 X13.801 Y-24.619 I.575 J.423 E.02484 G3 X15.112 Y-24.007 I-.16 J2.051 E.04902 G1 X15.767 Y-23.119 E.03662 G2 X16.422 Y-22.832 I.575 J-.423 E.02484 G2 X17.732 Y-23.444 I-.16 J-2.051 E.04902 G1 X18.387 Y-24.333 E.03662 G3 X18.937 Y-24.606 I.511 J.338 E.02132 G1 X18.937 Y-26.484 E.06231 G1 X18.387 Y-25.739 E.03071 G3 X17.732 Y-25.453 I-.575 J-.423 E.02484 G3 X16.422 Y-26.065 I.16 J-2.051 E.04902 G1 X15.767 Y-26.953 E.03662 G2 X15.112 Y-27.24 I-.575 J.423 E.02484 G2 X13.801 Y-26.628 I.16 J2.051 E.04902 G1 X13.146 Y-25.739 E.03662 G3 X12.491 Y-25.453 I-.575 J-.423 E.02484 G3 X11.181 Y-26.065 I.16 J-2.051 E.04902 G1 X10.525 Y-26.953 E.03662 G2 X9.87 Y-27.24 I-.575 J.423 E.02484 G2 X8.56 Y-26.628 I.16 J2.051 E.04902 G1 X7.905 Y-25.739 E.03662 G3 X7.25 Y-25.453 I-.575 J-.423 E.02484 G3 X5.939 Y-26.065 I.16 J-2.051 E.04902 G1 X5.284 Y-26.953 E.03662 G2 X4.629 Y-27.24 I-.575 J.423 E.02484 G2 X3.319 Y-26.628 I.16 J2.051 E.04902 G1 X2.663 Y-25.739 E.03662 G3 X2.008 Y-25.453 I-.575 J-.423 E.02484 G3 X.698 Y-26.065 I.16 J-2.051 E.04902 G1 X.043 Y-26.953 E.03662 G2 X-.612 Y-27.24 I-.575 J.423 E.02484 G2 X-1.923 Y-26.628 I.16 J2.051 E.04902 G1 X-2.578 Y-25.739 E.03662 G3 X-3.233 Y-25.453 I-.575 J-.423 E.02484 G3 X-4.543 Y-26.065 I.16 J-2.051 E.04902 G1 X-5.198 Y-26.953 E.03662 G2 X-5.854 Y-27.24 I-.575 J.423 E.02484 G2 X-7.164 Y-26.628 I.16 J2.051 E.04902 G1 X-7.819 Y-25.739 E.03662 G3 X-8.474 Y-25.453 I-.575 J-.423 E.02484 G3 X-9.785 Y-26.065 I.16 J-2.051 E.04902 G1 X-10.44 Y-26.953 E.03662 G2 X-11.095 Y-27.24 I-.575 J.423 E.02484 G2 X-12.405 Y-26.628 I.16 J2.051 E.04902 G1 X-13.06 Y-25.739 E.03662 G3 X-13.716 Y-25.453 I-.575 J-.423 E.02484 G3 X-15.026 Y-26.065 I.16 J-2.051 E.04902 G1 X-15.681 Y-26.953 E.03662 G2 X-16.336 Y-27.24 I-.575 J.423 E.02484 G2 X-17.647 Y-26.628 I.16 J2.051 E.04902 G1 X-18.302 Y-25.739 E.03662 G3 X-18.957 Y-25.453 I-.575 J-.423 E.02484 G3 X-20.267 Y-26.065 I.16 J-2.051 E.04902 G1 X-20.922 Y-26.953 E.03662 G2 X-21.578 Y-27.24 I-.575 J.423 E.02484 G2 X-22.888 Y-26.628 I.16 J2.051 E.04902 G1 X-23.543 Y-25.739 E.03662 G3 X-24.198 Y-25.453 I-.575 J-.423 E.02484 G3 X-25.509 Y-26.065 I.16 J-2.051 E.04902 G1 X-26.164 Y-26.953 E.03662 G2 X-26.819 Y-27.24 I-.575 J.423 E.02484 G2 X-28.129 Y-26.628 I.16 J2.051 E.04902 G1 X-28.784 Y-25.739 E.03662 G3 X-29.44 Y-25.453 I-.575 J-.423 E.02484 G3 X-30.75 Y-26.065 I.16 J-2.051 E.04902 G1 X-31.405 Y-26.953 E.03662 G2 X-32.06 Y-27.24 I-.575 J.423 E.02484 G2 X-33.37 Y-26.628 I.16 J2.051 E.04902 G1 X-34.026 Y-25.739 E.03662 G3 X-34.681 Y-25.453 I-.575 J-.423 E.02484 G3 X-35.991 Y-26.065 I.16 J-2.051 E.04902 G1 X-36.646 Y-26.953 E.03662 G2 X-37.301 Y-27.24 I-.575 J.423 E.02484 G2 X-38.612 Y-26.628 I.16 J2.051 E.04902 G1 X-39.267 Y-25.739 E.03662 G1 X-39.537 Y-25.536 E.01121 G1 X-39.537 Y-23.967 E.05206 G3 X-38.612 Y-24.619 I1.025 J.471 E.03933 G3 X-37.341 Y-24.034 I-.144 J1.986 E.04743 G3 X-34.537 Y-23.639 I1.017 J2.932 E.09752 G1 X-34.026 Y-24.333 E.02858 G3 X-33.37 Y-24.619 I.575 J.423 E.02484 G3 X-32.06 Y-24.007 I-.16 J2.051 E.04902 G1 X-31.405 Y-23.119 E.03662 G2 X-30.75 Y-22.832 I.575 J-.423 E.02484 G2 X-29.44 Y-23.444 I-.16 J-2.051 E.04902 G1 X-28.784 Y-24.333 E.03662 G3 X-28.129 Y-24.619 I.575 J.423 E.02484 G3 X-26.819 Y-24.007 I-.16 J2.051 E.04902 G1 X-26.164 Y-23.119 E.03662 G2 X-25.509 Y-22.832 I.575 J-.423 E.02484 G2 X-24.198 Y-23.444 I-.16 J-2.051 E.04902 G1 X-23.543 Y-24.333 E.03662 G3 X-22.888 Y-24.619 I.575 J.423 E.02484 G3 X-21.578 Y-24.007 I-.16 J2.051 E.04902 G1 X-20.922 Y-23.119 E.03662 G1 X-20.595 Y-22.872 E.0136 G1 X-20.452 Y-22.855 E.00476 G2 X-20.927 Y-21.716 I3.022 J1.928 E.04114 G2 X-21.578 Y-21.998 I-.569 J.42 E.02464 G2 X-22.888 Y-21.386 I.16 J2.051 E.04902 G1 X-23.543 Y-20.498 E.03662 G3 X-24.198 Y-20.212 I-.575 J-.423 E.02484 G3 X-25.509 Y-20.824 I.16 J-2.051 E.04902 G1 X-26.164 Y-21.712 E.03662 G2 X-26.819 Y-21.998 I-.575 J.423 E.02484 G2 X-28.129 Y-21.386 I.16 J2.051 E.04902 G1 X-28.784 Y-20.498 E.03662 G3 X-29.44 Y-20.212 I-.575 J-.423 E.02484 G3 X-30.75 Y-20.824 I.16 J-2.051 E.04902 G1 X-31.405 Y-21.712 E.03662 G2 X-32.06 Y-21.998 I-.575 J.423 E.02484 G2 X-33.366 Y-21.39 I.158 J2.044 E.04883 G2 X-33.86 Y-22.918 I-2.939 J.106 E.05397 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-33.459 Y-22.049 G1 X-33.366 Y-21.39 G1 X-33.055 Y-21.603 ;WIPE_END G1 X-37.789 Y-15.616 Z2.2 F30000 G1 X-49.135 Y-1.264 Z2.2 G1 Z1.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.409516 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385478 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342223 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305489 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275113 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276404 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307218 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344555 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.39396 G2 X-49.135 Y1.264 I8.183 J-1.359 E.0117 G1 X-48.477 Y2.767 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-47.432 Y3.177 I2.142 J-3.921 E.03735 G3 X-46.801 Y3.335 I.073 J1.05 E.02192 G2 X-45.365 Y2.901 I.208 J-1.905 E.05114 G2 X-43.989 Y1.604 I-1.444 J-2.911 E.06364 G3 X-42.543 Y2.199 I-.076 J2.238 E.053 G1 X-41.888 Y3.088 E.03662 G1 X-41.56 Y3.335 E.0136 G2 X-39.922 Y2.762 I.198 J-2.062 E.05938 G1 X-39.267 Y1.874 E.03662 G1 X-38.939 Y1.627 E.0136 G3 X-37.301 Y2.199 I.198 J2.062 E.05938 G1 X-36.646 Y3.088 E.03662 G1 X-36.319 Y3.335 E.0136 G2 X-34.681 Y2.762 I.198 J-2.062 E.05938 G1 X-34.026 Y1.874 E.03662 G1 X-33.698 Y1.627 E.0136 G3 X-32.06 Y2.199 I.198 J2.062 E.05938 G1 X-31.464 Y3.008 E.03332 G2 X-32.773 Y4.41 I1.183 J2.417 E.06506 G1 X-33.37 Y4.82 E.02403 G1 X-34.026 Y5.709 E.03662 G1 X-34.353 Y5.955 E.0136 G3 X-35.991 Y5.383 I-.198 J-2.062 E.05938 G1 X-36.646 Y4.494 E.03662 G1 X-36.974 Y4.248 E.0136 G2 X-38.612 Y4.82 I-.198 J2.062 E.05938 G1 X-39.267 Y5.709 E.03662 G1 X-39.595 Y5.955 E.0136 G3 X-41.232 Y5.383 I-.198 J-2.062 E.05938 G1 X-41.888 Y4.494 E.03662 G1 X-42.215 Y4.248 E.0136 G2 X-43.853 Y4.82 I-.198 J2.062 E.05938 G1 X-44.508 Y5.709 E.03662 G1 X-44.836 Y5.955 E.0136 G3 X-46.474 Y5.383 I-.198 J-2.062 E.05938 G1 X-47.129 Y4.494 E.03662 G2 X-47.784 Y4.208 I-.575 J.423 E.02484 G1 X-48.537 Y4.437 E.0261 G1 X-48.537 Y6.967 E.08391 G1 X-47.784 Y7.441 E.02951 G1 X-47.129 Y8.329 E.03662 G1 X-46.801 Y8.576 E.0136 G2 X-45.163 Y8.004 I.198 J-2.062 E.05938 G1 X-44.508 Y7.115 E.03662 G1 X-44.181 Y6.869 E.0136 G3 X-42.543 Y7.441 I.198 J2.062 E.05938 G1 X-41.888 Y8.329 E.03662 G1 X-41.56 Y8.576 E.0136 G2 X-39.922 Y8.004 I.198 J-2.062 E.05938 G1 X-39.267 Y7.115 E.03662 G1 X-38.939 Y6.869 E.0136 G3 X-37.301 Y7.441 I.198 J2.062 E.05938 G1 X-36.646 Y8.329 E.03662 G1 X-36.319 Y8.576 E.0136 G2 X-34.681 Y8.004 I.198 J-2.062 E.05938 G1 X-34.026 Y7.115 E.03662 G1 X-33.698 Y6.869 E.0136 G3 X-32.06 Y7.441 I.198 J2.062 E.05938 G1 X-31.405 Y8.329 E.03662 G1 X-31.077 Y8.576 E.0136 G2 X-29.44 Y8.004 I.198 J-2.062 E.05938 G1 X-29.363 Y7.9 E.00427 G1 X-29.363 Y9.528 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-29.363 Y7.9 G1 X-29.44 Y8.004 G1 X-29.64 Y8.141 ;WIPE_END G1 X-29.363 Y2.373 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 G1 F16200 G1 X-29.363 Y.744 E.05401 G3 X-30.75 Y.142 I.218 J-2.399 E.05102 G1 X-31.405 Y-.747 E.03662 G1 X-31.733 Y-.993 E.0136 G2 X-33.37 Y-.421 I-.198 J2.062 E.05938 G1 X-34.026 Y.467 E.03662 G1 X-34.353 Y.714 E.0136 G3 X-35.991 Y.142 I-.198 J-2.062 E.05938 G1 X-36.646 Y-.747 E.03662 G1 X-36.974 Y-.993 E.0136 G2 X-38.612 Y-.421 I-.198 J2.062 E.05938 G1 X-39.267 Y.467 E.03662 G1 X-39.595 Y.714 E.0136 G3 X-41.232 Y.142 I-.198 J-2.062 E.05938 G1 X-41.888 Y-.747 E.03662 G1 X-42.215 Y-.993 E.0136 G2 X-43.616 Y-.584 I-.21 J1.883 E.04968 G2 X-45.004 Y-2.696 I-3.348 J.689 E.08586 G1 X-44.508 Y-3.368 E.02769 G1 X-44.181 Y-3.614 E.0136 G3 X-42.543 Y-3.042 I.198 J2.062 E.05938 G1 X-41.888 Y-2.153 E.03662 G1 X-41.56 Y-1.907 E.0136 G2 X-39.922 Y-2.479 I.198 J-2.062 E.05938 G1 X-39.267 Y-3.368 E.03662 G1 X-38.939 Y-3.614 E.0136 G3 X-37.301 Y-3.042 I.198 J2.062 E.05938 G1 X-36.646 Y-2.153 E.03662 G1 X-36.319 Y-1.907 E.0136 G2 X-34.681 Y-2.479 I.198 J-2.062 E.05938 G1 X-34.026 Y-3.368 E.03662 G1 X-33.698 Y-3.614 E.0136 G3 X-32.06 Y-3.042 I.198 J2.062 E.05938 G1 X-31.405 Y-2.153 E.03662 G1 X-31.077 Y-1.907 E.0136 G2 X-29.44 Y-2.479 I.198 J-2.062 E.05938 G1 X-28.784 Y-3.368 E.03662 G1 X-28.457 Y-3.614 E.0136 G3 X-26.819 Y-3.042 I.198 J2.062 E.05938 G1 X-26.245 Y-2.263 E.03209 G1 X-24.513 Y-2.263 E.05745 G1 X-24.198 Y-2.479 E.01265 G1 X-23.543 Y-3.368 E.03662 G1 X-23.215 Y-3.614 E.0136 G3 X-21.578 Y-3.042 I.198 J2.062 E.05938 G1 X-21.003 Y-2.263 E.03209 G1 X-19.271 Y-2.263 E.05745 G1 X-18.957 Y-2.479 E.01265 G1 X-18.302 Y-3.368 E.03662 G1 X-17.974 Y-3.614 E.0136 G3 X-16.336 Y-3.042 I.198 J2.062 E.05938 G1 X-15.681 Y-2.153 E.03662 G1 X-15.354 Y-1.907 E.0136 G2 X-13.716 Y-2.479 I.198 J-2.062 E.05938 G1 X-13.06 Y-3.368 E.03662 G1 X-12.733 Y-3.614 E.0136 G3 X-11.095 Y-3.042 I.198 J2.062 E.05938 G1 X-10.44 Y-2.153 E.03662 G1 X-10.112 Y-1.907 E.0136 G2 X-8.474 Y-2.479 I.198 J-2.062 E.05938 G1 X-7.819 Y-3.368 E.03662 G1 X-7.492 Y-3.614 E.0136 G3 X-5.854 Y-3.042 I.198 J2.062 E.05938 G1 X-5.198 Y-2.153 E.03662 G2 X-4.563 Y-1.87 I.563 J-.407 E.02418 G1 X-4.563 Y-2.263 E.01305 G1 X-3.547 Y-2.263 E.03369 G1 X-3.233 Y-2.479 E.01265 G1 X-2.578 Y-3.368 E.03662 G1 X-2.25 Y-3.614 E.0136 G3 X-.612 Y-3.042 I.198 J2.062 E.05938 G1 X-.038 Y-2.263 E.03209 G1 X1.694 Y-2.263 E.05745 G1 X2.008 Y-2.479 E.01265 G1 X2.663 Y-3.368 E.03662 G1 X2.991 Y-3.614 E.0136 G3 X4.629 Y-3.042 I.198 J2.062 E.05938 G1 X5.203 Y-2.263 E.03209 G1 X6.935 Y-2.263 E.05745 G1 X7.25 Y-2.479 E.01265 G1 X7.905 Y-3.368 E.03662 G1 X8.232 Y-3.614 E.0136 G3 X9.87 Y-3.042 I.198 J2.062 E.05938 G1 X10.525 Y-2.153 E.03662 G1 X10.853 Y-1.907 E.0136 G2 X12.491 Y-2.479 I.198 J-2.062 E.05938 G1 X13.146 Y-3.368 E.03662 G1 X13.474 Y-3.614 E.0136 G3 X15.112 Y-3.042 I.198 J2.062 E.05938 G1 X15.767 Y-2.153 E.03662 G1 X16.094 Y-1.907 E.0136 G2 X17.732 Y-2.479 I.198 J-2.062 E.05938 G1 X18.387 Y-3.368 E.03662 G1 X18.715 Y-3.614 E.0136 G3 X20.353 Y-3.042 I.198 J2.062 E.05938 G1 X21.008 Y-2.153 E.03662 G1 X21.336 Y-1.907 E.0136 G2 X22.974 Y-2.479 I.198 J-2.062 E.05938 G1 X23.629 Y-3.368 E.03662 G1 X23.956 Y-3.614 E.0136 G3 X25.443 Y-3.146 I.206 J1.939 E.05317 G3 X27.937 Y-2.731 I.757 J3.154 E.08616 G1 X27.937 Y-4.557 E.06055 G3 X27.433 Y-4.737 I-.012 J-.761 E.01814 G1 X23.579 Y-4.737 E.12783 G3 X22.974 Y-4.488 I-.518 J-.399 E.02276 G1 X22.318 Y-4.65 E.02239 G1 X22.192 Y-4.737 E.0051 G1 X20.563 Y-4.737 E.05401 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393961 G1 F12000 G3 X28.611 Y-.863 I-8.088 J1.758 E.0117 ;WIDTH:0.344557 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.30722 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385478 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409518 G1 X28.535 Y1.264 E.00864 G1 X27.937 Y4.581 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X27.937 Y2.953 E.05401 G3 X26.577 Y3.335 I-1.149 J-1.481 E.04804 G2 X25.882 Y3.224 I-.5 J.902 E.0238 G3 X24.851 Y2.941 I.716 J-4.637 E.03556 G1 X27.937 Y9.539 F30000 G1 F16200 G1 X27.937 Y11.167 E.05401 G1 X27.56 Y11.074 E.01289 G1 X26.905 Y10.624 E.02636 G1 X26.249 Y9.736 E.03662 G2 X25.594 Y9.45 I-.575 J.423 E.02484 G2 X24.284 Y10.061 I.16 J2.051 E.04902 G1 X23.629 Y10.95 E.03662 G3 X22.974 Y11.236 I-.575 J-.423 E.02484 G3 X21.663 Y10.624 I.16 J-2.051 E.04902 G1 X21.008 Y9.736 E.03662 G2 X20.353 Y9.45 I-.575 J.423 E.02484 G2 X19.043 Y10.061 I.16 J2.051 E.04902 G1 X18.387 Y10.95 E.03662 G3 X17.732 Y11.236 I-.575 J-.423 E.02484 G3 X16.422 Y10.624 I.16 J-2.051 E.04902 G1 X15.767 Y9.736 E.03662 G2 X15.112 Y9.45 I-.575 J.423 E.02484 G2 X13.801 Y10.061 I.16 J2.051 E.04902 G1 X13.146 Y10.95 E.03662 G3 X12.491 Y11.236 I-.575 J-.423 E.02484 G3 X11.181 Y10.624 I.16 J-2.051 E.04902 G1 X10.525 Y9.736 E.03662 G2 X9.87 Y9.45 I-.575 J.423 E.02484 G2 X8.763 Y9.922 I.076 J1.711 E.0408 G1 X8.763 Y12.121 E.07293 G1 X9.215 Y12.232 E.01545 G1 X9.87 Y12.682 E.02636 G1 X10.525 Y13.571 E.03662 G2 X11.181 Y13.857 I.575 J-.423 E.02484 G2 X12.491 Y13.245 I-.16 J-2.051 E.04902 G1 X13.146 Y12.356 E.03662 G3 X13.801 Y12.07 I.575 J.423 E.02484 G3 X15.112 Y12.682 I-.16 J2.051 E.04902 G1 X15.767 Y13.571 E.03662 G2 X16.422 Y13.857 I.575 J-.423 E.02484 G2 X17.732 Y13.245 I-.16 J-2.051 E.04902 G1 X18.387 Y12.356 E.03662 G3 X19.043 Y12.07 I.575 J.423 E.02484 G3 X20.353 Y12.682 I-.16 J2.051 E.04902 G1 X21.008 Y13.571 E.03662 G2 X21.663 Y13.857 I.575 J-.423 E.02484 G2 X22.974 Y13.245 I-.16 J-2.051 E.04902 G1 X23.629 Y12.356 E.03662 G3 X24.284 Y12.07 I.575 J.423 E.02484 G3 X25.594 Y12.682 I-.16 J2.051 E.04902 G1 X26.249 Y13.571 E.03662 G2 X26.905 Y13.857 I.575 J-.423 E.02484 G2 X27.937 Y13.436 I-.045 J-1.586 E.03779 G1 X27.937 Y16.409 E.09862 G1 X27.56 Y16.315 E.01289 G1 X26.905 Y15.866 E.02636 G1 X26.249 Y14.977 E.03662 G2 X25.594 Y14.691 I-.575 J.423 E.02484 G2 X24.284 Y15.303 I.16 J2.051 E.04902 G1 X23.629 Y16.191 E.03662 G3 X22.974 Y16.477 I-.575 J-.423 E.02484 G3 X21.663 Y15.866 I.16 J-2.051 E.04902 G1 X21.008 Y14.977 E.03662 G2 X20.353 Y14.691 I-.575 J.423 E.02484 G2 X19.043 Y15.303 I.16 J2.051 E.04902 G1 X18.387 Y16.191 E.03662 G3 X17.732 Y16.477 I-.575 J-.423 E.02484 G3 X16.422 Y15.866 I.16 J-2.051 E.04902 G1 X15.767 Y14.977 E.03662 G2 X15.112 Y14.691 I-.575 J.423 E.02484 G2 X13.801 Y15.303 I.16 J2.051 E.04902 G1 X13.146 Y16.191 E.03662 G3 X12.491 Y16.477 I-.575 J-.423 E.02484 G3 X11.181 Y15.866 I.16 J-2.051 E.04902 G1 X10.525 Y14.977 E.03662 G2 X9.87 Y14.691 I-.575 J.423 E.02484 G2 X8.56 Y15.303 I.16 J2.051 E.04902 G1 X7.905 Y16.191 E.03662 G3 X7.25 Y16.477 I-.575 J-.423 E.02484 G3 X5.939 Y15.866 I.16 J-2.051 E.04902 G1 X5.284 Y14.977 E.03662 G2 X4.629 Y14.691 I-.575 J.423 E.02484 G2 X3.319 Y15.303 I.16 J2.051 E.04902 G1 X2.663 Y16.191 E.03662 G3 X2.008 Y16.477 I-.575 J-.423 E.02484 G3 X.698 Y15.866 I.16 J-2.051 E.04902 G1 X.043 Y14.977 E.03662 G2 X-.612 Y14.691 I-.575 J.423 E.02484 G2 X-1.923 Y15.303 I.16 J2.051 E.04902 G1 X-2.578 Y16.191 E.03662 G3 X-3.233 Y16.477 I-.575 J-.423 E.02484 G3 X-4.543 Y15.866 I.16 J-2.051 E.04902 G1 X-5.198 Y14.977 E.03662 G2 X-5.854 Y14.691 I-.575 J.423 E.02484 G2 X-7.164 Y15.303 I.16 J2.051 E.04902 G1 X-7.819 Y16.191 E.03662 G3 X-8.474 Y16.477 I-.575 J-.423 E.02484 G3 X-9.785 Y15.866 I.16 J-2.051 E.04902 G1 X-10.44 Y14.977 E.03662 G2 X-11.095 Y14.691 I-.575 J.423 E.02484 G2 X-12.405 Y15.303 I.16 J2.051 E.04902 G1 X-13.06 Y16.191 E.03662 G3 X-13.716 Y16.477 I-.575 J-.423 E.02484 G3 X-15.026 Y15.866 I.16 J-2.051 E.04902 G1 X-15.681 Y14.977 E.03662 G2 X-16.336 Y14.691 I-.575 J.423 E.02484 G2 X-17.647 Y15.303 I.16 J2.051 E.04902 G1 X-18.302 Y16.191 E.03662 G3 X-18.957 Y16.477 I-.575 J-.423 E.02484 G3 X-20.267 Y15.866 I.16 J-2.051 E.04902 G1 X-20.922 Y14.977 E.03662 G2 X-21.578 Y14.691 I-.575 J.423 E.02484 G2 X-22.888 Y15.303 I.16 J2.051 E.04902 G1 X-23.543 Y16.191 E.03662 G3 X-24.198 Y16.477 I-.575 J-.423 E.02484 G3 X-25.509 Y15.866 I.16 J-2.051 E.04902 G1 X-26.164 Y14.977 E.03662 G2 X-26.819 Y14.691 I-.575 J.423 E.02484 G2 X-28.129 Y15.303 I.16 J2.051 E.04902 G1 X-28.784 Y16.191 E.03662 G3 X-29.44 Y16.477 I-.575 J-.423 E.02484 G3 X-30.75 Y15.866 I.16 J-2.051 E.04902 G1 X-31.405 Y14.977 E.03662 G2 X-32.06 Y14.691 I-.575 J.423 E.02484 G2 X-33.37 Y15.303 I.16 J2.051 E.04902 G1 X-34.026 Y16.191 E.03662 G3 X-34.681 Y16.477 I-.575 J-.423 E.02484 G3 X-35.991 Y15.866 I.16 J-2.051 E.04902 G1 X-36.646 Y14.977 E.03662 G2 X-37.301 Y14.691 I-.575 J.423 E.02484 G2 X-38.612 Y15.303 I.16 J2.051 E.04902 G1 X-39.267 Y16.191 E.03662 G3 X-39.922 Y16.477 I-.575 J-.423 E.02484 G3 X-41.232 Y15.866 I.16 J-2.051 E.04902 G1 X-41.888 Y14.977 E.03662 G2 X-42.543 Y14.691 I-.575 J.423 E.02484 G2 X-43.853 Y15.303 I.16 J2.051 E.04902 G1 X-44.508 Y16.191 E.03662 G3 X-45.163 Y16.477 I-.575 J-.423 E.02484 G3 X-46.474 Y15.866 I.16 J-2.051 E.04902 G1 X-47.129 Y14.977 E.03662 G2 X-47.784 Y14.691 I-.575 J.423 E.02484 G1 X-48.537 Y14.92 E.0261 G1 X-48.537 Y12.208 E.08996 G1 X-47.784 Y12.682 E.02951 G1 X-47.129 Y13.571 E.03662 G2 X-46.474 Y13.857 I.575 J-.423 E.02484 G2 X-45.163 Y13.245 I-.16 J-2.051 E.04902 G1 X-44.508 Y12.356 E.03662 G3 X-43.853 Y12.07 I.575 J.423 E.02484 G3 X-42.543 Y12.682 I-.16 J2.051 E.04902 G1 X-41.888 Y13.571 E.03662 G2 X-41.232 Y13.857 I.575 J-.423 E.02484 G2 X-39.922 Y13.245 I-.16 J-2.051 E.04902 G1 X-39.267 Y12.356 E.03662 G3 X-38.612 Y12.07 I.575 J.423 E.02484 G3 X-37.301 Y12.682 I-.16 J2.051 E.04902 G1 X-36.646 Y13.571 E.03662 G2 X-35.991 Y13.857 I.575 J-.423 E.02484 G2 X-34.681 Y13.245 I-.16 J-2.051 E.04902 G1 X-34.026 Y12.356 E.03662 G3 X-33.37 Y12.07 I.575 J.423 E.02484 G3 X-32.06 Y12.682 I-.16 J2.051 E.04902 G1 X-31.405 Y13.571 E.03662 G2 X-30.75 Y13.857 I.575 J-.423 E.02484 G2 X-29.363 Y13.141 I-.433 J-2.54 E.05259 G1 X-29.363 Y11.227 E.06351 G1 X-29.44 Y11.236 E.00255 G3 X-30.75 Y10.624 I.16 J-2.051 E.04902 G1 X-31.405 Y9.736 E.03662 G2 X-32.06 Y9.45 I-.575 J.423 E.02484 G2 X-33.37 Y10.061 I.16 J2.051 E.04902 G1 X-34.026 Y10.95 E.03662 G3 X-34.681 Y11.236 I-.575 J-.423 E.02484 G3 X-35.991 Y10.624 I.16 J-2.051 E.04902 G1 X-36.646 Y9.736 E.03662 G2 X-37.301 Y9.45 I-.575 J.423 E.02484 G2 X-38.612 Y10.061 I.16 J2.051 E.04902 G1 X-39.267 Y10.95 E.03662 G3 X-39.922 Y11.236 I-.575 J-.423 E.02484 G3 X-41.232 Y10.624 I.16 J-2.051 E.04902 G1 X-41.888 Y9.736 E.03662 G2 X-42.543 Y9.45 I-.575 J.423 E.02484 G2 X-43.853 Y10.061 I.16 J2.051 E.04902 G1 X-44.508 Y10.95 E.03662 G3 X-45.163 Y11.236 I-.575 J-.423 E.02484 G3 X-46.474 Y10.624 I.16 J-2.051 E.04902 G1 X-47.129 Y9.736 E.03662 G2 X-47.784 Y9.45 I-.575 J.423 E.02484 G1 X-48.537 Y9.679 E.0261 G1 X-48.537 Y8.05 E.05401 G1 X-48.3 Y32.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y17.744 E.57795 G1 X-46.239 Y17.737 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-44.611 Y17.737 E.05401 G3 X-44.181 Y17.351 I.861 J.527 E.01944 G3 X-42.814 Y17.737 I.211 J1.866 E.04829 G1 X-42.537 Y17.737 E.00921 G1 X-42.537 Y17.931 E.00645 G1 X-41.888 Y18.812 E.03629 G1 X-41.56 Y19.058 E.0136 G2 X-39.922 Y18.486 I.198 J-2.062 E.05938 G1 X-39.267 Y17.598 E.03662 G1 X-38.939 Y17.351 E.0136 G3 X-37.301 Y17.923 I.198 J2.062 E.05938 G1 X-36.646 Y18.812 E.03662 G1 X-36.319 Y19.058 E.0136 G2 X-34.681 Y18.486 I.198 J-2.062 E.05938 G1 X-34.026 Y17.598 E.03662 G1 X-33.698 Y17.351 E.0136 G3 X-32.06 Y17.923 I.198 J2.062 E.05938 G1 X-31.405 Y18.812 E.03662 G1 X-31.077 Y19.058 E.0136 G2 X-29.44 Y18.486 I.198 J-2.062 E.05938 G1 X-28.784 Y17.598 E.03662 G1 X-28.457 Y17.351 E.0136 G3 X-26.819 Y17.923 I.198 J2.062 E.05938 G1 X-26.164 Y18.812 E.03662 G1 X-25.836 Y19.058 E.0136 G2 X-24.198 Y18.486 I.198 J-2.062 E.05938 G1 X-23.543 Y17.598 E.03662 G1 X-23.215 Y17.351 E.0136 G3 X-21.578 Y17.923 I.198 J2.062 E.05938 G1 X-20.922 Y18.812 E.03662 G1 X-20.595 Y19.058 E.0136 G2 X-18.957 Y18.486 I.198 J-2.062 E.05938 G1 X-18.302 Y17.598 E.03662 G1 X-17.974 Y17.351 E.0136 G3 X-16.336 Y17.923 I.198 J2.062 E.05938 G1 X-15.681 Y18.812 E.03662 G1 X-15.354 Y19.058 E.0136 G2 X-13.716 Y18.486 I.198 J-2.062 E.05938 G1 X-13.06 Y17.598 E.03662 G1 X-12.733 Y17.351 E.0136 G3 X-11.095 Y17.923 I.198 J2.062 E.05938 G1 X-10.44 Y18.812 E.03662 G1 X-10.112 Y19.058 E.0136 G2 X-8.474 Y18.486 I.198 J-2.062 E.05938 G1 X-7.819 Y17.598 E.03662 G1 X-7.492 Y17.351 E.0136 G3 X-5.854 Y17.923 I.198 J2.062 E.05938 G1 X-5.198 Y18.812 E.03662 G1 X-4.871 Y19.058 E.0136 G2 X-3.233 Y18.486 I.198 J-2.062 E.05938 G1 X-2.578 Y17.598 E.03662 G1 X-2.25 Y17.351 E.0136 G3 X-.612 Y17.923 I.198 J2.062 E.05938 G1 X.043 Y18.812 E.03662 G1 X.37 Y19.058 E.0136 G2 X2.008 Y18.486 I.198 J-2.062 E.05938 G1 X2.663 Y17.598 E.03662 G1 X2.991 Y17.351 E.0136 G3 X4.629 Y17.923 I.198 J2.062 E.05938 G1 X5.284 Y18.812 E.03662 G1 X5.612 Y19.058 E.0136 G2 X7.25 Y18.486 I.198 J-2.062 E.05938 G1 X7.905 Y17.598 E.03662 G1 X8.232 Y17.351 E.0136 G3 X9.87 Y17.923 I.198 J2.062 E.05938 G1 X10.525 Y18.812 E.03662 G1 X10.853 Y19.058 E.0136 G2 X12.491 Y18.486 I.198 J-2.062 E.05938 G1 X13.146 Y17.598 E.03662 G1 X13.474 Y17.351 E.0136 G3 X15.112 Y17.923 I.198 J2.062 E.05938 G1 X15.767 Y18.812 E.03662 G1 X16.094 Y19.058 E.0136 G2 X17.732 Y18.486 I.198 J-2.062 E.05938 G1 X18.387 Y17.598 E.03662 G1 X18.715 Y17.351 E.0136 G3 X20.353 Y17.923 I.198 J2.062 E.05938 G1 X21.008 Y18.812 E.03662 G2 X21.937 Y19.03 I.622 J-.561 E.03367 G1 X21.937 Y21.295 E.07512 G1 X21.663 Y21.107 E.01101 G1 X21.008 Y20.218 E.03662 G1 X20.68 Y19.972 E.0136 G2 X19.043 Y20.544 I-.198 J2.062 E.05938 G1 X18.387 Y21.433 E.03662 G1 X18.06 Y21.679 E.0136 G3 X16.422 Y21.107 I-.198 J-2.062 E.05938 G1 X15.767 Y20.218 E.03662 G1 X15.439 Y19.972 E.0136 G2 X13.801 Y20.544 I-.198 J2.062 E.05938 G1 X13.146 Y21.433 E.03662 G1 X12.819 Y21.679 E.0136 G3 X11.181 Y21.107 I-.198 J-2.062 E.05938 G1 X10.525 Y20.218 E.03662 G1 X10.198 Y19.972 E.0136 G2 X8.56 Y20.544 I-.198 J2.062 E.05938 G1 X7.905 Y21.433 E.03662 G1 X7.577 Y21.679 E.0136 G3 X5.939 Y21.107 I-.198 J-2.062 E.05938 G1 X5.284 Y20.218 E.03662 G1 X4.957 Y19.972 E.0136 G2 X3.319 Y20.544 I-.198 J2.062 E.05938 G1 X2.663 Y21.433 E.03662 G1 X2.336 Y21.679 E.0136 G3 X.698 Y21.107 I-.198 J-2.062 E.05938 G1 X.043 Y20.218 E.03662 G1 X-.285 Y19.972 E.0136 G2 X-1.923 Y20.544 I-.198 J2.062 E.05938 G1 X-2.578 Y21.433 E.03662 G1 X-2.905 Y21.679 E.0136 G3 X-4.543 Y21.107 I-.198 J-2.062 E.05938 G1 X-5.198 Y20.218 E.03662 G1 X-5.526 Y19.972 E.0136 G2 X-7.164 Y20.544 I-.198 J2.062 E.05938 G1 X-7.819 Y21.433 E.03662 G1 X-8.147 Y21.679 E.0136 G3 X-9.785 Y21.107 I-.198 J-2.062 E.05938 G1 X-10.44 Y20.218 E.03662 G1 X-10.767 Y19.972 E.0136 G2 X-12.405 Y20.544 I-.198 J2.062 E.05938 G1 X-13.06 Y21.433 E.03662 G1 X-13.388 Y21.679 E.0136 G3 X-15.026 Y21.107 I-.198 J-2.062 E.05938 G1 X-15.681 Y20.218 E.03662 G1 X-16.009 Y19.972 E.0136 G2 X-17.647 Y20.544 I-.198 J2.062 E.05938 G1 X-18.302 Y21.433 E.03662 G1 X-18.629 Y21.679 E.0136 G3 X-20.267 Y21.107 I-.198 J-2.062 E.05938 G1 X-20.922 Y20.218 E.03662 G1 X-21.25 Y19.972 E.0136 G2 X-22.888 Y20.544 I-.198 J2.062 E.05938 G1 X-23.543 Y21.433 E.03662 G1 X-23.871 Y21.679 E.0136 G3 X-25.509 Y21.107 I-.198 J-2.062 E.05938 G1 X-26.164 Y20.218 E.03662 G1 X-26.491 Y19.972 E.0136 G2 X-28.129 Y20.544 I-.198 J2.062 E.05938 G1 X-28.784 Y21.433 E.03662 G1 X-29.112 Y21.679 E.0136 G3 X-30.75 Y21.107 I-.198 J-2.062 E.05938 G1 X-31.405 Y20.218 E.03662 G1 X-31.733 Y19.972 E.0136 G2 X-33.37 Y20.544 I-.198 J2.062 E.05938 G1 X-34.026 Y21.433 E.03662 G1 X-34.353 Y21.679 E.0136 G3 X-35.991 Y21.107 I-.198 J-2.062 E.05938 G1 X-36.646 Y20.218 E.03662 G1 X-36.974 Y19.972 E.0136 G2 X-38.612 Y20.544 I-.198 J2.062 E.05938 G1 X-39.267 Y21.433 E.03662 G1 X-39.595 Y21.679 E.0136 G3 X-41.232 Y21.107 I-.198 J-2.062 E.05938 G1 X-41.888 Y20.218 E.03662 G2 X-42.537 Y19.933 I-.571 J.418 E.02464 G1 X-42.537 Y23.173 E.10747 G1 X-41.888 Y24.053 E.03629 G1 X-41.56 Y24.3 E.0136 G2 X-39.922 Y23.728 I.198 J-2.062 E.05938 G1 X-39.267 Y22.839 E.03662 G1 X-38.939 Y22.592 E.0136 G3 X-37.301 Y23.165 I.198 J2.062 E.05938 G1 X-36.646 Y24.053 E.03662 G1 X-36.319 Y24.3 E.0136 G2 X-34.681 Y23.728 I.198 J-2.062 E.05938 G1 X-34.026 Y22.839 E.03662 G1 X-33.698 Y22.592 E.0136 G3 X-32.06 Y23.165 I.198 J2.062 E.05938 G1 X-31.405 Y24.053 E.03662 G1 X-31.077 Y24.3 E.0136 G2 X-29.44 Y23.728 I.198 J-2.062 E.05938 G1 X-28.784 Y22.839 E.03662 G1 X-28.457 Y22.592 E.0136 G3 X-26.819 Y23.165 I.198 J2.062 E.05938 G1 X-26.164 Y24.053 E.03662 G2 X-25.563 Y24.333 I.542 J-.379 E.02302 G1 X-25.563 Y26.274 E.0644 G1 X-26.164 Y25.46 E.03357 G1 X-26.491 Y25.213 E.0136 G2 X-28.129 Y25.785 I-.198 J2.062 E.05938 G1 X-28.784 Y26.674 E.03662 G1 X-29.112 Y26.92 E.0136 G3 X-30.75 Y26.348 I-.198 J-2.062 E.05938 G1 X-31.405 Y25.46 E.03662 G1 X-31.733 Y25.213 E.0136 G2 X-33.37 Y25.785 I-.198 J2.062 E.05938 G1 X-34.026 Y26.674 E.03662 G1 X-34.353 Y26.92 E.0136 G3 X-35.991 Y26.348 I-.198 J-2.062 E.05938 G1 X-36.646 Y25.46 E.03662 G1 X-36.974 Y25.213 E.0136 G2 X-38.612 Y25.785 I-.198 J2.062 E.05938 G1 X-39.267 Y26.674 E.03662 G1 X-39.595 Y26.92 E.0136 G3 X-41.232 Y26.348 I-.198 J-2.062 E.05938 G1 X-41.888 Y25.46 E.03662 G2 X-42.537 Y25.174 I-.571 J.418 E.02464 G1 X-42.537 Y28.414 E.10747 G1 X-41.888 Y29.295 E.03629 G1 X-41.56 Y29.541 E.0136 G2 X-39.922 Y28.969 I.198 J-2.062 E.05938 G1 X-39.267 Y28.08 E.03662 G1 X-38.939 Y27.834 E.0136 G3 X-37.301 Y28.406 I.198 J2.062 E.05938 G1 X-36.646 Y29.295 E.03662 G1 X-36.319 Y29.541 E.0136 G2 X-34.681 Y28.969 I.198 J-2.062 E.05938 G1 X-34.026 Y28.08 E.03662 G1 X-33.698 Y27.834 E.0136 G3 X-32.06 Y28.406 I.198 J2.062 E.05938 G1 X-31.405 Y29.295 E.03662 G1 X-31.077 Y29.541 E.0136 G2 X-29.44 Y28.969 I.198 J-2.062 E.05938 G1 X-28.784 Y28.08 E.03662 G1 X-28.457 Y27.834 E.0136 G3 X-26.819 Y28.406 I.198 J2.062 E.05938 G1 X-26.164 Y29.295 E.03662 G2 X-25.563 Y29.574 I.542 J-.379 E.02302 G1 X-25.563 Y31.515 E.0644 G1 X-26.164 Y30.701 E.03357 G1 X-26.491 Y30.454 E.0136 G2 X-28.129 Y31.027 I-.198 J2.062 E.05938 G1 X-28.784 Y31.915 E.03662 G1 X-29.112 Y32.162 E.0136 G3 X-30.75 Y31.589 I-.198 J-2.062 E.05938 G1 X-31.405 Y30.701 E.03662 G1 X-31.733 Y30.454 E.0136 G2 X-33.37 Y31.027 I-.198 J2.062 E.05938 G1 X-34.026 Y31.915 E.03662 G1 X-34.353 Y32.162 E.0136 G3 X-35.991 Y31.589 I-.198 J-2.062 E.05938 G1 X-36.646 Y30.701 E.03662 G1 X-36.974 Y30.454 E.0136 G2 X-38.612 Y31.027 I-.198 J2.062 E.05938 G1 X-39.267 Y31.915 E.03662 G1 X-39.595 Y32.162 E.0136 G3 X-41.232 Y31.589 I-.198 J-2.062 E.05938 G1 X-41.888 Y30.701 E.03662 G2 X-42.537 Y30.416 I-.571 J.418 E.02464 G1 X-42.537 Y32.044 E.05401 G1 X-41.049 Y59.737 F30000 G1 F16200 G1 X-39.421 Y59.737 E.05401 G3 X-38.612 Y59.242 I.871 J.516 E.03274 G3 X-37.472 Y59.737 I-.089 J1.766 E.04212 G1 X-34.18 Y59.737 E.10921 G3 X-33.37 Y59.242 I.871 J.516 E.03274 G3 X-32.231 Y59.737 I-.089 J1.766 E.04212 G1 X-28.938 Y59.737 E.10921 G3 X-28.129 Y59.242 I.871 J.516 E.03274 G3 X-26.989 Y59.737 I-.089 J1.766 E.04212 G1 X-23.697 Y59.737 E.10921 G3 X-22.888 Y59.242 I.871 J.516 E.03274 G3 X-21.748 Y59.737 I-.089 J1.766 E.04212 G1 X-18.456 Y59.737 E.10921 G3 X-17.647 Y59.242 I.871 J.516 E.03274 G3 X-16.507 Y59.737 I-.089 J1.766 E.04212 G1 X-13.214 Y59.737 E.10921 G3 X-12.405 Y59.242 I.871 J.516 E.03274 G3 X-11.265 Y59.737 I-.089 J1.766 E.04212 G1 X-7.973 Y59.737 E.10921 G3 X-7.164 Y59.242 I.871 J.516 E.03274 G3 X-6.024 Y59.737 I-.089 J1.766 E.04212 G1 X-2.732 Y59.737 E.10921 G3 X-1.923 Y59.242 I.871 J.516 E.03274 G3 X-.783 Y59.737 I-.089 J1.766 E.04212 G1 X2.51 Y59.737 E.10921 G3 X3.319 Y59.242 I.871 J.516 E.03274 G3 X4.459 Y59.737 I-.089 J1.766 E.04212 G1 X7.751 Y59.737 E.10921 G3 X8.56 Y59.242 I.871 J.516 E.03274 G3 X9.7 Y59.737 I-.089 J1.766 E.04212 G1 X12.992 Y59.737 E.10921 G3 X13.801 Y59.242 I.871 J.516 E.03274 G3 X14.941 Y59.737 I-.089 J1.766 E.04212 G1 X18.233 Y59.737 E.10921 G3 X19.043 Y59.242 I.871 J.516 E.03274 G3 X20.183 Y59.737 I-.089 J1.766 E.04212 G1 X21.641 Y59.737 E.04838 G3 X21.786 Y57.88 I2.589 J-.731 E.06308 G1 X21.663 Y57.796 E.00495 G1 X21.008 Y56.907 E.03662 G2 X20.353 Y56.621 I-.575 J.423 E.02484 G2 X19.043 Y57.233 I.16 J2.051 E.04902 G1 X18.387 Y58.122 E.03662 G3 X17.732 Y58.408 I-.575 J-.423 E.02484 G3 X16.422 Y57.796 I.16 J-2.051 E.04902 G1 X15.767 Y56.907 E.03662 G2 X15.112 Y56.621 I-.575 J.423 E.02484 G2 X13.801 Y57.233 I.16 J2.051 E.04902 G1 X13.146 Y58.122 E.03662 G3 X12.491 Y58.408 I-.575 J-.423 E.02484 G3 X11.181 Y57.796 I.16 J-2.051 E.04902 G1 X10.525 Y56.907 E.03662 G2 X9.87 Y56.621 I-.575 J.423 E.02484 G2 X8.56 Y57.233 I.16 J2.051 E.04902 G1 X7.905 Y58.122 E.03662 G3 X7.25 Y58.408 I-.575 J-.423 E.02484 G3 X5.939 Y57.796 I.16 J-2.051 E.04902 G1 X5.284 Y56.907 E.03662 G2 X4.629 Y56.621 I-.575 J.423 E.02484 M73 P29 R56 G2 X3.319 Y57.233 I.16 J2.051 E.04902 G1 X2.663 Y58.122 E.03662 G3 X2.008 Y58.408 I-.575 J-.423 E.02484 G3 X.698 Y57.796 I.16 J-2.051 E.04902 G1 X.043 Y56.907 E.03662 G2 X-.612 Y56.621 I-.575 J.423 E.02484 G2 X-1.923 Y57.233 I.16 J2.051 E.04902 G1 X-2.578 Y58.122 E.03662 G3 X-3.233 Y58.408 I-.575 J-.423 E.02484 G3 X-4.543 Y57.796 I.16 J-2.051 E.04902 G1 X-5.198 Y56.907 E.03662 G2 X-5.854 Y56.621 I-.575 J.423 E.02484 G2 X-7.164 Y57.233 I.16 J2.051 E.04902 G1 X-7.819 Y58.122 E.03662 G3 X-8.474 Y58.408 I-.575 J-.423 E.02484 G3 X-9.785 Y57.796 I.16 J-2.051 E.04902 G1 X-10.44 Y56.907 E.03662 G2 X-11.095 Y56.621 I-.575 J.423 E.02484 G2 X-12.405 Y57.233 I.16 J2.051 E.04902 G1 X-13.06 Y58.122 E.03662 G3 X-13.716 Y58.408 I-.575 J-.423 E.02484 G3 X-15.026 Y57.796 I.16 J-2.051 E.04902 G1 X-15.681 Y56.907 E.03662 G2 X-16.336 Y56.621 I-.575 J.423 E.02484 G2 X-17.647 Y57.233 I.16 J2.051 E.04902 G1 X-18.302 Y58.122 E.03662 G3 X-18.957 Y58.408 I-.575 J-.423 E.02484 G3 X-20.267 Y57.796 I.16 J-2.051 E.04902 G1 X-20.922 Y56.907 E.03662 G2 X-21.578 Y56.621 I-.575 J.423 E.02484 G2 X-22.888 Y57.233 I.16 J2.051 E.04902 G1 X-23.543 Y58.122 E.03662 G3 X-24.198 Y58.408 I-.575 J-.423 E.02484 G3 X-25.509 Y57.796 I.16 J-2.051 E.04902 G1 X-26.164 Y56.907 E.03662 G2 X-26.819 Y56.621 I-.575 J.423 E.02484 G2 X-28.129 Y57.233 I.16 J2.051 E.04902 G1 X-28.784 Y58.122 E.03662 G3 X-29.44 Y58.408 I-.575 J-.423 E.02484 G3 X-30.75 Y57.796 I.16 J-2.051 E.04902 G1 X-31.405 Y56.907 E.03662 G2 X-32.06 Y56.621 I-.575 J.423 E.02484 G2 X-33.37 Y57.233 I.16 J2.051 E.04902 G1 X-34.026 Y58.122 E.03662 G3 X-34.681 Y58.408 I-.575 J-.423 E.02484 G3 X-35.991 Y57.796 I.16 J-2.051 E.04902 G1 X-36.646 Y56.907 E.03662 G2 X-37.301 Y56.621 I-.575 J.423 E.02484 G2 X-38.612 Y57.233 I.16 J2.051 E.04902 G1 X-39.267 Y58.122 E.03662 G3 X-39.922 Y58.408 I-.575 J-.423 E.02484 G3 X-41.232 Y57.796 I.16 J-2.051 E.04902 G1 X-41.888 Y56.907 E.03662 G2 X-42.543 Y56.621 I-.575 J.423 E.02484 G1 X-43.263 Y56.828 E.02484 G2 X-46.843 Y57.295 I-1.528 J2.241 E.13106 G2 X-47.784 Y56.621 I-1.047 J.468 E.04024 G1 X-48.537 Y56.85 E.0261 G1 X-48.537 Y59.38 E.08391 G1 X-47.954 Y59.737 E.02266 G1 X-47.359 Y59.737 E.01975 G3 X-47.447 Y58.715 I4.464 J-.899 E.03411 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-47.443 Y59.348 G1 X-47.359 Y59.737 G1 X-47.954 Y59.737 G1 X-48.273 Y59.542 ;WIPE_END G1 X-44.93 Y52.68 Z2.2 F30000 G1 X-42.537 Y47.768 Z2.2 G1 Z1.8 G1 E.8 F1800 G1 F16200 G1 X-42.537 Y46.139 E.05401 G3 X-41.888 Y46.425 I.078 J.703 E.02464 G1 X-41.232 Y47.313 E.03662 G2 X-39.595 Y47.886 I1.44 J-1.49 E.05938 G1 X-39.267 Y47.639 E.0136 G1 X-38.612 Y46.751 E.03662 G3 X-36.974 Y46.178 I1.44 J1.49 E.05938 G1 X-36.646 Y46.425 E.0136 G1 X-35.991 Y47.313 E.03662 G2 X-34.353 Y47.886 I1.44 J-1.49 E.05938 G1 X-34.026 Y47.639 E.0136 G1 X-33.37 Y46.751 E.03662 G3 X-31.733 Y46.178 I1.44 J1.49 E.05938 G1 X-31.405 Y46.425 E.0136 G1 X-30.75 Y47.313 E.03662 G2 X-29.112 Y47.886 I1.44 J-1.49 E.05938 G1 X-28.784 Y47.639 E.0136 G1 X-28.129 Y46.751 E.03662 G3 X-26.491 Y46.178 I1.44 J1.49 E.05938 G1 X-26.164 Y46.425 E.0136 G1 X-25.563 Y47.239 E.03357 G1 X-25.563 Y45.298 E.0644 G3 X-26.164 Y45.018 I-.059 J-.658 E.02302 G1 X-26.819 Y44.13 E.03662 G2 X-28.457 Y43.558 I-1.44 J1.49 E.05938 G1 X-28.784 Y43.804 E.0136 G1 X-29.44 Y44.693 E.03662 G3 X-31.077 Y45.265 I-1.44 J-1.49 E.05938 G1 X-31.405 Y45.018 E.0136 G1 X-32.06 Y44.13 E.03662 G2 X-33.698 Y43.558 I-1.44 J1.49 E.05938 G1 X-34.026 Y43.804 E.0136 G1 X-34.681 Y44.693 E.03662 G3 X-36.319 Y45.265 I-1.44 J-1.49 E.05938 G1 X-36.646 Y45.018 E.0136 G1 X-37.301 Y44.13 E.03662 G2 X-38.939 Y43.558 I-1.44 J1.49 E.05938 G1 X-39.267 Y43.804 E.0136 G1 X-39.922 Y44.693 E.03662 G3 X-41.56 Y45.265 I-1.44 J-1.49 E.05938 G1 X-41.888 Y45.018 E.0136 G1 X-42.537 Y44.138 E.03629 G1 X-42.537 Y40.898 E.10747 G3 X-41.888 Y41.184 I.078 J.703 E.02464 G1 X-41.232 Y42.072 E.03662 G2 X-39.595 Y42.644 I1.44 J-1.49 E.05938 G1 X-39.267 Y42.398 E.0136 G1 X-38.612 Y41.509 E.03662 G3 X-36.974 Y40.937 I1.44 J1.49 E.05938 G1 X-36.646 Y41.184 E.0136 G1 X-35.991 Y42.072 E.03662 G2 X-34.353 Y42.644 I1.44 J-1.49 E.05938 G1 X-34.026 Y42.398 E.0136 G1 X-33.37 Y41.509 E.03662 G3 X-31.733 Y40.937 I1.44 J1.49 E.05938 G1 X-31.405 Y41.184 E.0136 G1 X-30.75 Y42.072 E.03662 G2 X-29.112 Y42.644 I1.44 J-1.49 E.05938 G1 X-28.784 Y42.398 E.0136 G1 X-28.129 Y41.509 E.03662 G3 X-26.491 Y40.937 I1.44 J1.49 E.05938 G1 X-26.164 Y41.184 E.0136 G1 X-25.563 Y41.998 E.03357 G1 X-25.563 Y40.057 E.0644 G3 X-26.164 Y39.777 I-.059 J-.658 E.02302 G1 X-26.819 Y38.889 E.03662 G2 X-28.457 Y38.316 I-1.44 J1.49 E.05938 G1 X-28.784 Y38.563 E.0136 G1 X-29.44 Y39.451 E.03662 G3 X-31.077 Y40.024 I-1.44 J-1.49 E.05938 G1 X-31.405 Y39.777 E.0136 G1 X-32.06 Y38.889 E.03662 G2 X-33.698 Y38.316 I-1.44 J1.49 E.05938 G1 X-34.026 Y38.563 E.0136 G1 X-34.681 Y39.451 E.03662 G3 X-36.319 Y40.024 I-1.44 J-1.49 E.05938 G1 X-36.646 Y39.777 E.0136 G1 X-37.301 Y38.889 E.03662 G2 X-38.939 Y38.316 I-1.44 J1.49 E.05938 G1 X-39.267 Y38.563 E.0136 G1 X-39.922 Y39.451 E.03662 G3 X-41.56 Y40.024 I-1.44 J-1.49 E.05938 G1 X-41.888 Y39.777 E.0136 G1 X-42.537 Y38.897 E.03629 G1 X-42.537 Y37.737 E.03847 G1 X-43.005 Y37.737 E.01554 G1 X-48.3 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-45.681 Y52.263 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-44.053 Y52.263 E.05401 G3 X-44.836 Y53.127 I-1.837 J-.878 E.03922 G3 X-46.474 Y52.555 I-.198 J-2.062 E.05938 G1 X-46.689 Y52.263 E.01202 G1 X-47.823 Y52.263 E.03763 G1 X-47.823 Y52.467 E.00675 G1 X-48.537 Y52.467 E.02368 G1 X-48.537 Y54.139 E.05546 G1 X-47.784 Y54.613 E.02951 G1 X-47.129 Y55.501 E.03662 G1 X-46.801 Y55.748 E.0136 G2 X-45.163 Y55.175 I.198 J-2.062 E.05938 G1 X-44.508 Y54.287 E.03662 G1 X-44.181 Y54.04 E.0136 G3 X-42.543 Y54.613 I.198 J2.062 E.05938 G1 X-41.888 Y55.501 E.03662 G1 X-41.56 Y55.748 E.0136 G2 X-39.922 Y55.175 I.198 J-2.062 E.05938 G1 X-39.267 Y54.287 E.03662 G1 X-38.939 Y54.04 E.0136 G3 X-37.301 Y54.613 I.198 J2.062 E.05938 G1 X-36.646 Y55.501 E.03662 G1 X-36.319 Y55.748 E.0136 G2 X-34.681 Y55.175 I.198 J-2.062 E.05938 G1 X-34.026 Y54.287 E.03662 G1 X-33.698 Y54.04 E.0136 G3 X-32.06 Y54.613 I.198 J2.062 E.05938 G1 X-31.405 Y55.501 E.03662 G1 X-31.077 Y55.748 E.0136 G2 X-29.44 Y55.175 I.198 J-2.062 E.05938 G1 X-28.784 Y54.287 E.03662 G1 X-28.457 Y54.04 E.0136 G3 X-26.819 Y54.613 I.198 J2.062 E.05938 G1 X-26.164 Y55.501 E.03662 G1 X-25.836 Y55.748 E.0136 G2 X-24.198 Y55.175 I.198 J-2.062 E.05938 G1 X-23.543 Y54.287 E.03662 G1 X-23.215 Y54.04 E.0136 G3 X-21.578 Y54.613 I.198 J2.062 E.05938 G1 X-20.922 Y55.501 E.03662 G1 X-20.595 Y55.748 E.0136 G2 X-18.957 Y55.175 I.198 J-2.062 E.05938 G1 X-18.302 Y54.287 E.03662 G1 X-17.974 Y54.04 E.0136 G3 X-16.336 Y54.613 I.198 J2.062 E.05938 G1 X-15.681 Y55.501 E.03662 G1 X-15.354 Y55.748 E.0136 G2 X-13.716 Y55.175 I.198 J-2.062 E.05938 G1 X-13.06 Y54.287 E.03662 G1 X-12.733 Y54.04 E.0136 G3 X-11.095 Y54.613 I.198 J2.062 E.05938 G1 X-10.44 Y55.501 E.03662 G1 X-10.112 Y55.748 E.0136 G2 X-8.474 Y55.175 I.198 J-2.062 E.05938 G1 X-7.819 Y54.287 E.03662 G1 X-7.492 Y54.04 E.0136 G3 X-5.854 Y54.613 I.198 J2.062 E.05938 G1 X-5.198 Y55.501 E.03662 G1 X-4.871 Y55.748 E.0136 G2 X-3.233 Y55.175 I.198 J-2.062 E.05938 G1 X-2.578 Y54.287 E.03662 G1 X-2.25 Y54.04 E.0136 G3 X-.612 Y54.613 I.198 J2.062 E.05938 G1 X.043 Y55.501 E.03662 G1 X.37 Y55.748 E.0136 G2 X2.008 Y55.175 I.198 J-2.062 E.05938 G1 X2.663 Y54.287 E.03662 G1 X2.991 Y54.04 E.0136 G3 X4.629 Y54.613 I.198 J2.062 E.05938 G1 X5.284 Y55.501 E.03662 G1 X5.612 Y55.748 E.0136 G2 X7.25 Y55.175 I.198 J-2.062 E.05938 G1 X7.905 Y54.287 E.03662 G1 X8.232 Y54.04 E.0136 G3 X9.87 Y54.613 I.198 J2.062 E.05938 G1 X10.525 Y55.501 E.03662 G1 X10.853 Y55.748 E.0136 G2 X12.491 Y55.175 I.198 J-2.062 E.05938 G1 X13.146 Y54.287 E.03662 G1 X13.474 Y54.04 E.0136 G3 X15.112 Y54.613 I.198 J2.062 E.05938 G1 X15.767 Y55.501 E.03662 G1 X16.094 Y55.748 E.0136 G2 X17.732 Y55.175 I.198 J-2.062 E.05938 G1 X18.387 Y54.287 E.03662 G1 X18.715 Y54.04 E.0136 G3 X20.353 Y54.613 I.198 J2.062 E.05938 G1 X21.008 Y55.501 E.03662 G1 X21.336 Y55.748 E.0136 G2 X22.974 Y55.175 I.198 J-2.062 E.05938 G1 X23.629 Y54.287 E.03662 G1 X23.956 Y54.04 E.0136 G3 X25.594 Y54.613 I.198 J2.062 E.05938 G1 X26.249 Y55.501 E.03662 G1 X26.577 Y55.748 E.0136 G2 X27.937 Y55.366 I.211 J-1.863 E.04804 G1 X27.937 Y53.098 E.07525 G1 X27.56 Y53.004 E.01289 G1 X26.905 Y52.555 E.02636 G1 X26.69 Y52.263 E.01202 G1 X24.084 Y52.263 E.08644 G3 X23.301 Y53.127 I-1.837 J-.878 E.03922 G3 X21.663 Y52.555 I-.198 J-2.062 E.05938 G1 X21.008 Y51.666 E.03662 G1 X20.68 Y51.42 E.0136 G2 X19.043 Y51.992 I-.198 J2.062 E.05938 G1 X18.387 Y52.88 E.03662 G1 X18.06 Y53.127 E.0136 G3 X16.422 Y52.555 I-.198 J-2.062 E.05938 G1 X15.767 Y51.666 E.03662 G1 X15.439 Y51.42 E.0136 G2 X13.801 Y51.992 I-.198 J2.062 E.05938 G1 X13.146 Y52.88 E.03662 G1 X12.819 Y53.127 E.0136 G3 X11.181 Y52.555 I-.198 J-2.062 E.05938 G1 X10.525 Y51.666 E.03662 G1 X10.198 Y51.42 E.0136 G2 X8.56 Y51.992 I-.198 J2.062 E.05938 G1 X7.905 Y52.88 E.03662 G1 X7.577 Y53.127 E.0136 G3 X5.939 Y52.555 I-.198 J-2.062 E.05938 G1 X5.284 Y51.666 E.03662 G1 X4.957 Y51.42 E.0136 G2 X3.319 Y51.992 I-.198 J2.062 E.05938 G1 X2.663 Y52.88 E.03662 G1 X2.336 Y53.127 E.0136 G3 X.698 Y52.555 I-.198 J-2.062 E.05938 G1 X.043 Y51.666 E.03662 G1 X-.285 Y51.42 E.0136 G2 X-1.923 Y51.992 I-.198 J2.062 E.05938 G1 X-2.578 Y52.88 E.03662 G1 X-2.905 Y53.127 E.0136 G3 X-4.543 Y52.555 I-.198 J-2.062 E.05938 G1 X-5.198 Y51.666 E.03662 G1 X-5.526 Y51.42 E.0136 G2 X-7.164 Y51.992 I-.198 J2.062 E.05938 G1 X-7.819 Y52.88 E.03662 G1 X-8.147 Y53.127 E.0136 G3 X-9.785 Y52.555 I-.198 J-2.062 E.05938 G1 X-10.44 Y51.666 E.03662 G1 X-10.767 Y51.42 E.0136 G2 X-12.405 Y51.992 I-.198 J2.062 E.05938 G1 X-13.06 Y52.88 E.03662 G1 X-13.388 Y53.127 E.0136 G3 X-15.026 Y52.555 I-.198 J-2.062 E.05938 G1 X-15.681 Y51.666 E.03662 G1 X-16.009 Y51.42 E.0136 G2 X-17.647 Y51.992 I-.198 J2.062 E.05938 G1 X-18.302 Y52.88 E.03662 G1 X-18.629 Y53.127 E.0136 G3 X-20.267 Y52.555 I-.198 J-2.062 E.05938 G1 X-20.922 Y51.666 E.03662 G1 X-21.25 Y51.42 E.0136 G2 X-22.888 Y51.992 I-.198 J2.062 E.05938 G1 X-23.543 Y52.88 E.03662 G1 X-23.871 Y53.127 E.0136 G3 X-25.509 Y52.555 I-.198 J-2.062 E.05938 G1 X-26.164 Y51.666 E.03662 G1 X-26.491 Y51.42 E.0136 G2 X-28.129 Y51.992 I-.198 J2.062 E.05938 G1 X-28.784 Y52.88 E.03662 G1 X-29.112 Y53.127 E.0136 G3 X-30.75 Y52.555 I-.198 J-2.062 E.05938 G1 X-31.405 Y51.666 E.03662 G1 X-31.733 Y51.42 E.0136 G2 X-33.37 Y51.992 I-.198 J2.062 E.05938 G1 X-34.026 Y52.88 E.03662 G1 X-34.353 Y53.127 E.0136 G3 X-35.991 Y52.555 I-.198 J-2.062 E.05938 G1 X-36.646 Y51.666 E.03662 G1 X-36.974 Y51.42 E.0136 G2 X-38.612 Y51.992 I-.198 J2.062 E.05938 G1 X-39.267 Y52.88 E.03662 G1 X-39.595 Y53.127 E.0136 G3 X-41.232 Y52.555 I-.198 J-2.062 E.05938 G1 X-41.888 Y51.666 E.03662 G2 X-42.537 Y51.381 I-.571 J.418 E.02464 G1 X-42.537 Y49.379 E.0664 G1 X-41.888 Y50.26 E.03629 G1 X-41.56 Y50.506 E.0136 G2 X-39.922 Y49.934 I.198 J-2.062 E.05938 G1 X-39.267 Y49.045 E.03662 G1 X-38.939 Y48.799 E.0136 G3 X-37.301 Y49.371 I.198 J2.062 E.05938 G1 X-36.646 Y50.26 E.03662 G1 X-36.319 Y50.506 E.0136 G2 X-34.681 Y49.934 I.198 J-2.062 E.05938 G1 X-34.026 Y49.045 E.03662 G1 X-33.698 Y48.799 E.0136 G3 X-32.06 Y49.371 I.198 J2.062 E.05938 G1 X-31.405 Y50.26 E.03662 G1 X-31.077 Y50.506 E.0136 G2 X-29.44 Y49.934 I.198 J-2.062 E.05938 G1 X-28.784 Y49.045 E.03662 G1 X-28.457 Y48.799 E.0136 G3 X-26.819 Y49.371 I.198 J2.062 E.05938 G1 X-26.164 Y50.26 E.03662 G1 X-25.836 Y50.506 E.0136 G2 X-24.198 Y49.934 I.198 J-2.062 E.05938 G1 X-23.543 Y49.045 E.03662 G1 X-23.215 Y48.799 E.0136 G3 X-21.578 Y49.371 I.198 J2.062 E.05938 G1 X-20.922 Y50.26 E.03662 G1 X-20.595 Y50.506 E.0136 G2 X-18.957 Y49.934 I.198 J-2.062 E.05938 G1 X-18.302 Y49.045 E.03662 G1 X-17.974 Y48.799 E.0136 G3 X-16.336 Y49.371 I.198 J2.062 E.05938 G1 X-15.681 Y50.26 E.03662 G1 X-15.354 Y50.506 E.0136 G2 X-13.716 Y49.934 I.198 J-2.062 E.05938 G1 X-13.06 Y49.045 E.03662 G1 X-12.733 Y48.799 E.0136 G3 X-11.095 Y49.371 I.198 J2.062 E.05938 G1 X-10.44 Y50.26 E.03662 G1 X-10.112 Y50.506 E.0136 G2 X-8.474 Y49.934 I.198 J-2.062 E.05938 G1 X-7.819 Y49.045 E.03662 G1 X-7.492 Y48.799 E.0136 G3 X-5.854 Y49.371 I.198 J2.062 E.05938 G1 X-5.198 Y50.26 E.03662 G1 X-4.871 Y50.506 E.0136 G2 X-3.233 Y49.934 I.198 J-2.062 E.05938 G1 X-2.578 Y49.045 E.03662 G1 X-2.25 Y48.799 E.0136 G3 X-.612 Y49.371 I.198 J2.062 E.05938 G1 X.043 Y50.26 E.03662 G1 X.37 Y50.506 E.0136 G2 X2.008 Y49.934 I.198 J-2.062 E.05938 G1 X2.663 Y49.045 E.03662 G1 X2.991 Y48.799 E.0136 G3 X4.629 Y49.371 I.198 J2.062 E.05938 G1 X5.284 Y50.26 E.03662 G1 X5.612 Y50.506 E.0136 G2 X7.25 Y49.934 I.198 J-2.062 E.05938 G1 X7.905 Y49.045 E.03662 G1 X8.232 Y48.799 E.0136 G3 X9.87 Y49.371 I.198 J2.062 E.05938 G1 X10.525 Y50.26 E.03662 G1 X10.853 Y50.506 E.0136 G2 X12.491 Y49.934 I.198 J-2.062 E.05938 G1 X13.146 Y49.045 E.03662 G1 X13.474 Y48.799 E.0136 G3 X15.112 Y49.371 I.198 J2.062 E.05938 G1 X15.767 Y50.26 E.03662 G1 X16.094 Y50.506 E.0136 G2 X17.732 Y49.934 I.198 J-2.062 E.05938 G1 X18.387 Y49.045 E.03662 G1 X18.715 Y48.799 E.0136 G3 X20.353 Y49.371 I.198 J2.062 E.05938 G1 X21.008 Y50.26 E.03662 G2 X21.937 Y50.478 I.622 J-.561 E.03367 G1 X21.937 Y47.501 E.09875 G1 X21.663 Y47.313 E.01101 G1 X21.008 Y46.425 E.03662 G1 X20.68 Y46.178 E.0136 G2 X19.043 Y46.751 I-.198 J2.062 E.05938 G1 X18.387 Y47.639 E.03662 G1 X18.06 Y47.886 E.0136 G3 X16.422 Y47.313 I-.198 J-2.062 E.05938 G1 X15.767 Y46.425 E.03662 G1 X15.439 Y46.178 E.0136 G2 X13.801 Y46.751 I-.198 J2.062 E.05938 G1 X13.146 Y47.639 E.03662 G1 X12.819 Y47.886 E.0136 G3 X11.181 Y47.313 I-.198 J-2.062 E.05938 G1 X10.525 Y46.425 E.03662 G1 X10.198 Y46.178 E.0136 G2 X8.56 Y46.751 I-.198 J2.062 E.05938 G1 X7.905 Y47.639 E.03662 G1 X7.577 Y47.886 E.0136 G3 X5.939 Y47.313 I-.198 J-2.062 E.05938 G1 X5.284 Y46.425 E.03662 G1 X4.963 Y46.183 E.01333 G1 X4.963 Y44.583 E.05308 G2 X5.612 Y45.265 I1.465 J-.744 E.03166 G2 X7.25 Y44.693 I.198 J-2.062 E.05938 G1 X7.905 Y43.804 E.03662 G1 X8.232 Y43.558 E.0136 G3 X9.87 Y44.13 I.198 J2.062 E.05938 G1 X10.525 Y45.018 E.03662 G1 X10.853 Y45.265 E.0136 G2 X12.491 Y44.693 I.198 J-2.062 E.05938 G1 X13.146 Y43.804 E.03662 G1 X13.474 Y43.558 E.0136 G3 X15.112 Y44.13 I.198 J2.062 E.05938 G1 X15.767 Y45.018 E.03662 G1 X16.094 Y45.265 E.0136 G2 X17.732 Y44.693 I.198 J-2.062 E.05938 G1 X18.387 Y43.804 E.03662 G1 X18.715 Y43.558 E.0136 G3 X20.353 Y44.13 I.198 J2.062 E.05938 G1 X21.008 Y45.018 E.03662 G2 X21.937 Y45.237 I.622 J-.561 E.03367 G1 X21.937 Y42.26 E.09875 G1 X21.663 Y42.072 E.01101 G1 X21.008 Y41.184 E.03662 G1 X20.68 Y40.937 E.0136 G2 X19.043 Y41.509 I-.198 J2.062 E.05938 G1 X18.387 Y42.398 E.03662 G1 X18.06 Y42.644 E.0136 G3 X16.422 Y42.072 I-.198 J-2.062 E.05938 G1 X15.767 Y41.184 E.03662 G1 X15.439 Y40.937 E.0136 G2 X13.801 Y41.509 I-.198 J2.062 E.05938 G1 X13.146 Y42.398 E.03662 G1 X12.819 Y42.644 E.0136 G3 X11.181 Y42.072 I-.198 J-2.062 E.05938 G1 X10.525 Y41.184 E.03662 G1 X10.198 Y40.937 E.0136 G2 X8.56 Y41.509 I-.198 J2.062 E.05938 G1 X7.905 Y42.398 E.03662 G1 X7.577 Y42.644 E.0136 G3 X5.939 Y42.072 I-.198 J-2.062 E.05938 G1 X5.284 Y41.184 E.03662 G1 X4.963 Y40.942 E.01333 G1 X4.963 Y39.342 E.05308 G2 X5.612 Y40.024 I1.465 J-.744 E.03166 G2 X7.25 Y39.451 I.198 J-2.062 E.05938 G1 X7.905 Y38.563 E.03662 G1 X8.232 Y38.316 E.0136 G3 X9.87 Y38.889 I.198 J2.062 E.05938 G1 X10.525 Y39.777 E.03662 G1 X10.853 Y40.024 E.0136 G2 X12.491 Y39.451 I.198 J-2.062 E.05938 G1 X13.146 Y38.563 E.03662 G1 X13.474 Y38.316 E.0136 G3 X15.112 Y38.889 I.198 J2.062 E.05938 G1 X15.767 Y39.777 E.03662 G1 X16.094 Y40.024 E.0136 G2 X17.732 Y39.451 I.198 J-2.062 E.05938 G1 X18.387 Y38.563 E.03662 G1 X18.715 Y38.316 E.0136 G3 X20.353 Y38.889 I.198 J2.062 E.05938 G1 X21.008 Y39.777 E.03662 G2 X21.937 Y39.996 I.622 J-.561 E.03367 G1 X21.937 Y38.367 E.05401 G1 X27.7 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X23.885 Y56.355 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X25.459 Y56.655 I.301 J2.702 E.05396 G3 X26.249 Y56.907 I.186 J.782 E.02892 G1 X26.905 Y57.796 E.03662 G1 X27.56 Y58.246 E.02636 G1 X27.937 Y58.339 E.01289 G1 X27.937 Y59.737 E.04637 G1 X27.706 Y59.737 E.00765 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X27.937 Y59.737 G1 X27.937 Y58.339 G1 X27.576 Y58.25 ;WIPE_END G1 X22.97 Y52.164 Z2.2 F30000 G1 X-16.037 Y.631 Z2.2 G1 Z1.8 G1 E.8 F1800 G1 F16200 G1 X-16.037 Y-.997 E.05401 G1 X-15.681 Y-.747 E.01442 G1 X-15.026 Y.142 E.03662 G2 X-13.388 Y.714 I1.44 J-1.49 E.05938 G1 X-13.06 Y.467 E.0136 G1 X-12.405 Y-.421 E.03662 G3 X-10.767 Y-.993 I1.44 J1.49 E.05938 G1 X-10.44 Y-.747 E.0136 G1 X-9.785 Y.142 E.03662 G2 X-8.147 Y.714 I1.44 J-1.49 E.05938 G1 X-7.819 Y.467 E.0136 G1 X-7.164 Y-.421 E.03662 G3 X-5.526 Y-.993 I1.44 J1.49 E.05938 G1 X-5.198 Y-.747 E.0136 G1 X-4.563 Y.115 E.03551 G1 X-4.563 Y3.372 E.10804 G3 X-5.198 Y3.088 I-.073 J-.69 E.02418 G1 X-5.854 Y2.199 E.03662 G2 X-7.492 Y1.627 I-1.44 J1.49 E.05938 G1 X-7.819 Y1.874 E.0136 G1 X-8.474 Y2.762 E.03662 G3 X-10.112 Y3.335 I-1.44 J-1.49 E.05938 G1 X-10.44 Y3.088 E.0136 G1 X-11.095 Y2.199 E.03662 G2 X-12.733 Y1.627 I-1.44 J1.49 E.05938 G1 X-13.06 Y1.874 E.0136 G1 X-13.716 Y2.762 E.03662 G3 X-15.354 Y3.335 I-1.44 J-1.49 E.05938 G3 X-16.037 Y2.605 I.878 J-1.508 E.03362 G1 X-16.037 Y4.244 E.05437 G1 X-15.681 Y4.494 E.01442 G1 X-15.026 Y5.383 E.03662 G2 X-13.388 Y5.955 I1.44 J-1.49 E.05938 G1 X-13.06 Y5.709 E.0136 G1 X-12.405 Y4.82 E.03662 G3 X-10.767 Y4.248 I1.44 J1.49 E.05938 G1 X-10.44 Y4.494 E.0136 G1 X-9.785 Y5.383 E.03662 G2 X-8.147 Y5.955 I1.44 J-1.49 E.05938 G1 X-7.819 Y5.709 E.0136 G1 X-7.164 Y4.82 E.03662 G3 X-5.526 Y4.248 I1.44 J1.49 E.05938 G1 X-5.198 Y4.494 E.0136 G1 X-4.563 Y5.356 E.03551 G1 X-4.563 Y8.613 E.10804 G3 X-5.198 Y8.329 I-.073 J-.69 E.02418 G1 X-5.854 Y7.441 E.03662 G2 X-7.492 Y6.869 I-1.44 J1.49 E.05938 G1 X-7.819 Y7.115 E.0136 G1 X-8.474 Y8.004 E.03662 G3 X-10.112 Y8.576 I-1.44 J-1.49 E.05938 G1 X-10.44 Y8.329 E.0136 G1 X-11.095 Y7.441 E.03662 G2 X-12.733 Y6.869 I-1.44 J1.49 E.05938 G1 X-13.06 Y7.115 E.0136 G1 X-13.716 Y8.004 E.03662 G3 X-15.354 Y8.576 I-1.44 J-1.49 E.05938 G3 X-16.037 Y7.847 I.878 J-1.508 E.03362 G1 X-16.037 Y9.486 E.05437 G1 X-15.681 Y9.736 E.01442 G1 X-15.026 Y10.624 E.03662 G2 X-13.388 Y11.196 I1.44 J-1.49 E.05938 G1 X-13.06 Y10.95 E.0136 G1 X-12.405 Y10.061 E.03662 G3 X-10.767 Y9.489 I1.44 J1.49 E.05938 G1 X-10.44 Y9.736 E.0136 G1 X-9.785 Y10.624 E.03662 G2 X-8.147 Y11.196 I1.44 J-1.49 E.05938 G1 X-7.819 Y10.95 E.0136 G1 X-7.164 Y10.061 E.03662 G3 X-5.526 Y9.489 I1.44 J1.49 E.05938 G1 X-5.198 Y9.736 E.0136 G1 X-4.563 Y10.597 E.03551 G1 X-4.563 Y13.854 E.10804 G3 X-5.198 Y13.571 I-.073 J-.69 E.02418 G1 X-5.854 Y12.682 E.03662 G2 X-7.492 Y12.11 I-1.44 J1.49 E.05938 G1 X-7.819 Y12.356 E.0136 G1 X-8.474 Y13.245 E.03662 G3 X-10.112 Y13.817 I-1.44 J-1.49 E.05938 G1 X-10.44 Y13.571 E.0136 G1 X-11.095 Y12.682 E.03662 G2 X-12.733 Y12.11 I-1.44 J1.49 E.05938 G1 X-13.06 Y12.356 E.0136 G1 X-13.716 Y13.245 E.03662 G3 X-15.354 Y13.817 I-1.44 J-1.49 E.05938 G3 X-16.037 Y13.088 I.878 J-1.508 E.03362 G1 X-16.037 Y14.263 E.03898 G1 X-16.49 Y14.263 E.01504 G1 X-22.584 Y23.737 F30000 G1 F16200 G1 X-24.212 Y23.737 E.05401 G1 X-23.543 Y22.839 E.03714 G3 X-22.888 Y22.553 I.575 J.423 E.02484 G3 X-21.156 Y23.737 I-.388 J2.427 E.07191 G1 X-18.971 Y23.737 E.07248 G1 X-18.302 Y22.839 E.03714 G3 X-17.647 Y22.553 I.575 J.423 E.02484 G3 X-15.914 Y23.737 I-.388 J2.427 E.07191 G1 X-13.729 Y23.737 E.07248 G1 X-13.06 Y22.839 E.03714 G3 X-12.405 Y22.553 I.575 J.423 E.02484 G3 X-10.673 Y23.737 I-.388 J2.427 E.07191 G1 X-8.488 Y23.737 E.07248 G1 X-7.819 Y22.839 E.03714 G3 X-7.164 Y22.553 I.575 J.423 E.02484 G3 X-5.432 Y23.737 I-.388 J2.427 E.07191 G1 X-3.247 Y23.737 E.07248 G1 X-2.578 Y22.839 E.03714 G3 X-1.923 Y22.553 I.575 J.423 E.02484 G3 X-.19 Y23.737 I-.388 J2.427 E.07191 G1 X1.995 Y23.737 E.07248 G1 X2.663 Y22.839 E.03714 G3 X3.319 Y22.553 I.575 J.423 E.02484 G3 X4.629 Y23.165 I-.16 J2.051 E.04902 G1 X5.284 Y24.053 E.03662 G2 X5.939 Y24.339 I.575 J-.423 E.02484 G2 X7.25 Y23.728 I-.16 J-2.051 E.04902 G1 X7.905 Y22.839 E.03662 G3 X8.56 Y22.553 I.575 J.423 E.02484 G3 X9.87 Y23.165 I-.16 J2.051 E.04902 G1 X10.525 Y24.053 E.03662 G2 X11.181 Y24.339 I.575 J-.423 E.02484 G2 X12.491 Y23.728 I-.16 J-2.051 E.04902 G1 X13.146 Y22.839 E.03662 G3 X13.801 Y22.553 I.575 J.423 E.02484 G3 X15.112 Y23.165 I-.16 J2.051 E.04902 G1 X15.767 Y24.053 E.03662 G2 X16.422 Y24.339 I.575 J-.423 E.02484 G2 X17.732 Y23.728 I-.16 J-2.051 E.04902 G1 X18.387 Y22.839 E.03662 G3 X19.043 Y22.553 I.575 J.423 E.02484 G3 X20.353 Y23.165 I-.16 J2.051 E.04902 G1 X21.008 Y24.053 E.03662 G2 X21.937 Y24.272 I.622 J-.561 E.03367 G1 X21.937 Y26.536 E.07512 G1 X21.663 Y26.348 E.01101 G1 X21.008 Y25.46 E.03662 G2 X20.353 Y25.174 I-.575 J.423 E.02484 G2 X19.043 Y25.785 I.16 J2.051 E.04902 G1 X18.387 Y26.674 E.03662 G3 X17.732 Y26.96 I-.575 J-.423 E.02484 G3 X16.422 Y26.348 I.16 J-2.051 E.04902 G1 X15.767 Y25.46 E.03662 G2 X15.112 Y25.174 I-.575 J.423 E.02484 G2 X13.801 Y25.785 I.16 J2.051 E.04902 G1 X13.146 Y26.674 E.03662 G3 X12.491 Y26.96 I-.575 J-.423 E.02484 G3 X11.181 Y26.348 I.16 J-2.051 E.04902 G1 X10.525 Y25.46 E.03662 G2 X9.87 Y25.174 I-.575 J.423 E.02484 G2 X8.56 Y25.785 I.16 J2.051 E.04902 G1 X7.905 Y26.674 E.03662 G3 X7.25 Y26.96 I-.575 J-.423 E.02484 G3 X5.939 Y26.348 I.16 J-2.051 E.04902 G1 X5.284 Y25.46 E.03662 G1 X4.963 Y25.218 E.01333 G1 X4.963 Y26.846 E.05401 G1 X4.963 Y32.472 F30000 G1 F16200 G1 X4.963 Y34.1 E.05401 G2 X5.939 Y34.822 I1.095 J-.461 E.04226 G2 X7.25 Y34.21 I-.16 J-2.051 E.04902 G1 X7.905 Y33.322 E.03662 G3 X8.56 Y33.035 I.575 J.423 E.02484 G3 X9.87 Y33.647 I-.16 J2.051 E.04902 G1 X10.525 Y34.536 E.03662 G2 X11.181 Y34.822 I.575 J-.423 E.02484 G2 X12.491 Y34.21 I-.16 J-2.051 E.04902 G1 X13.146 Y33.322 E.03662 G3 X13.801 Y33.035 I.575 J.423 E.02484 G3 X15.112 Y33.647 I-.16 J2.051 E.04902 G1 X15.767 Y34.536 E.03662 G2 X16.422 Y34.822 I.575 J-.423 E.02484 G2 X17.732 Y34.21 I-.16 J-2.051 E.04902 G1 X18.387 Y33.322 E.03662 G3 X19.043 Y33.035 I.575 J.423 E.02484 G3 X20.353 Y33.647 I-.16 J2.051 E.04902 G1 X21.008 Y34.536 E.03662 G2 X21.663 Y34.822 I.575 J-.423 E.02484 G2 X22.974 Y34.21 I-.16 J-2.051 E.04902 G1 X23.629 Y33.322 E.03662 G3 X24.284 Y33.035 I.575 J.423 E.02484 G3 X25.594 Y33.647 I-.16 J2.051 E.04902 G1 X26.249 Y34.536 E.03662 G2 X26.905 Y34.822 I.575 J-.423 E.02484 G2 X27.937 Y34.401 I-.045 J-1.586 E.03779 G1 X27.937 Y37.374 E.09862 G1 X27.56 Y37.281 E.01289 G1 X26.905 Y36.831 E.02636 G1 X26.249 Y35.942 E.03662 G2 X25.594 Y35.656 I-.575 J.423 E.02484 G2 X24.284 Y36.268 I.16 J2.051 E.04902 G1 X23.629 Y37.156 E.03662 G3 X22.974 Y37.443 I-.575 J-.423 E.02484 G3 X21.663 Y36.831 I.16 J-2.051 E.04902 G1 X21.008 Y35.942 E.03662 G2 X20.353 Y35.656 I-.575 J.423 E.02484 G2 X19.043 Y36.268 I.16 J2.051 E.04902 G1 X18.387 Y37.156 E.03662 G3 X17.732 Y37.443 I-.575 J-.423 E.02484 G3 X16.422 Y36.831 I.16 J-2.051 E.04902 G1 X15.767 Y35.942 E.03662 G2 X15.112 Y35.656 I-.575 J.423 E.02484 G2 X13.801 Y36.268 I.16 J2.051 E.04902 G1 X13.146 Y37.156 E.03662 G3 X12.491 Y37.443 I-.575 J-.423 E.02484 G3 X11.181 Y36.831 I.16 J-2.051 E.04902 G1 X10.525 Y35.942 E.03662 G2 X9.87 Y35.656 I-.575 J.423 E.02484 G2 X8.56 Y36.268 I.16 J2.051 E.04902 G1 X7.905 Y37.156 E.03662 G3 X7.25 Y37.443 I-.575 J-.423 E.02484 G3 X5.939 Y36.831 I.16 J-2.051 E.04902 G1 X5.284 Y35.942 E.03662 G2 X4.629 Y35.656 I-.575 J.423 E.02484 G2 X3.319 Y36.268 I.16 J2.051 E.04902 G1 X2.663 Y37.156 E.03662 G3 X2.008 Y37.443 I-.575 J-.423 E.02484 G3 X.698 Y36.831 I.16 J-2.051 E.04902 G1 X.043 Y35.942 E.03662 G2 X-.612 Y35.656 I-.575 J.423 E.02484 G2 X-1.923 Y36.268 I.16 J2.051 E.04902 G1 X-2.578 Y37.156 E.03662 G3 X-3.233 Y37.443 I-.575 J-.423 E.02484 G3 X-4.543 Y36.831 I.16 J-2.051 E.04902 G1 X-5.198 Y35.942 E.03662 G2 X-5.854 Y35.656 I-.575 J.423 E.02484 G2 X-7.164 Y36.268 I.16 J2.051 E.04902 G1 X-7.819 Y37.156 E.03662 G3 X-8.474 Y37.443 I-.575 J-.423 E.02484 G3 X-9.785 Y36.831 I.16 J-2.051 E.04902 G1 X-10.44 Y35.942 E.03662 G2 X-11.095 Y35.656 I-.575 J.423 E.02484 G2 X-12.405 Y36.268 I.16 J2.051 E.04902 G1 X-13.06 Y37.156 E.03662 G3 X-13.716 Y37.443 I-.575 J-.423 E.02484 G3 X-15.026 Y36.831 I.16 J-2.051 E.04902 G1 X-15.681 Y35.942 E.03662 G2 X-16.336 Y35.656 I-.575 J.423 E.02484 G2 X-17.647 Y36.268 I.16 J2.051 E.04902 G1 X-18.302 Y37.156 E.03662 G3 X-18.957 Y37.443 I-.575 J-.423 E.02484 G3 X-20.267 Y36.831 I.16 J-2.051 E.04902 G1 X-20.922 Y35.942 E.03662 G2 X-21.578 Y35.656 I-.575 J.423 E.02484 G2 X-22.888 Y36.268 I.16 J2.051 E.04902 G1 X-23.543 Y37.156 E.03662 G3 X-24.198 Y37.443 I-.575 J-.423 E.02484 G3 X-25.509 Y36.831 I.16 J-2.051 E.04902 G1 X-26.164 Y35.942 E.03662 G2 X-26.819 Y35.656 I-.575 J.423 E.02484 G2 X-28.129 Y36.268 I.16 J2.051 E.04902 G1 X-28.784 Y37.156 E.03662 G3 X-29.44 Y37.443 I-.575 J-.423 E.02484 G3 X-30.75 Y36.831 I.16 J-2.051 E.04902 G1 X-31.405 Y35.942 E.03662 G2 X-32.06 Y35.656 I-.575 J.423 E.02484 G2 X-33.37 Y36.268 I.16 J2.051 E.04902 G1 X-34.026 Y37.156 E.03662 G3 X-34.681 Y37.443 I-.575 J-.423 E.02484 G3 X-35.991 Y36.831 I.16 J-2.051 E.04902 G1 X-36.646 Y35.942 E.03662 G2 X-37.301 Y35.656 I-.575 J.423 E.02484 G2 X-38.612 Y36.268 I.16 J2.051 E.04902 G1 X-39.267 Y37.156 E.03662 G3 X-39.922 Y37.443 I-.575 J-.423 E.02484 G3 X-41.232 Y36.831 I.16 J-2.051 E.04902 G1 X-41.888 Y35.942 E.03662 G2 X-42.543 Y35.656 I-.575 J.423 E.02484 G2 X-43.853 Y36.268 I.16 J2.051 E.04902 G1 X-44.508 Y37.156 E.03662 G3 X-45.163 Y37.443 I-.575 J-.423 E.02484 G3 X-46.474 Y36.831 I.16 J-2.051 E.04902 G1 X-47.129 Y35.942 E.03662 G2 X-47.784 Y35.656 I-.575 J.423 E.02484 G1 X-48.537 Y35.885 E.0261 G1 X-48.537 Y33.173 E.08996 G1 X-47.784 Y33.647 E.02951 G1 X-47.129 Y34.536 E.03662 G2 X-46.474 Y34.822 I.575 J-.423 E.02484 G2 X-45.163 Y34.21 I-.16 J-2.051 E.04902 G1 X-44.508 Y33.322 E.03662 G3 X-43.853 Y33.035 I.575 J.423 E.02484 G3 X-42.543 Y33.647 I-.16 J2.051 E.04902 G1 X-41.888 Y34.536 E.03662 G2 X-41.232 Y34.822 I.575 J-.423 E.02484 G2 X-39.922 Y34.21 I-.16 J-2.051 E.04902 G1 X-39.267 Y33.322 E.03662 G3 X-38.612 Y33.035 I.575 J.423 E.02484 G3 X-37.301 Y33.647 I-.16 J2.051 E.04902 G1 X-36.646 Y34.536 E.03662 G2 X-35.991 Y34.822 I.575 J-.423 E.02484 G2 X-34.681 Y34.21 I-.16 J-2.051 E.04902 G1 X-34.026 Y33.322 E.03662 G3 X-33.37 Y33.035 I.575 J.423 E.02484 G3 X-32.06 Y33.647 I-.16 J2.051 E.04902 M73 P30 R56 G1 X-31.405 Y34.536 E.03662 G2 X-30.75 Y34.822 I.575 J-.423 E.02484 G2 X-29.44 Y34.21 I-.16 J-2.051 E.04902 G1 X-28.784 Y33.322 E.03662 G3 X-28.129 Y33.035 I.575 J.423 E.02484 G3 X-26.819 Y33.647 I-.16 J2.051 E.04902 G1 X-26.164 Y34.536 E.03662 G2 X-25.509 Y34.822 I.575 J-.423 E.02484 G2 X-24.275 Y34.263 I-.128 J-1.922 E.04589 G1 X-21.123 Y34.263 E.10456 G2 X-20.267 Y34.822 I.932 J-.493 E.03541 G2 X-19.034 Y34.263 I-.128 J-1.922 E.04589 G1 X-15.882 Y34.263 E.10456 G2 X-15.026 Y34.822 I.932 J-.493 E.03541 G2 X-13.793 Y34.263 I-.128 J-1.922 E.04589 G1 X-10.641 Y34.263 E.10456 G2 X-9.785 Y34.822 I.932 J-.493 E.03541 G2 X-8.551 Y34.263 I-.128 J-1.922 E.04589 G1 X-5.4 Y34.263 E.10456 G2 X-4.543 Y34.822 I.932 J-.493 E.03541 G2 X-3.31 Y34.263 I-.128 J-1.922 E.04589 G1 X-.158 Y34.263 E.10456 G2 X.698 Y34.822 I.932 J-.493 E.03541 G2 X1.931 Y34.263 I-.128 J-1.922 E.04589 G1 X3.559 Y34.263 E.05401 G1 X21.937 Y27.885 F30000 G1 F16200 G1 X21.937 Y29.513 E.05401 G3 X21.008 Y29.295 I-.307 J-.78 E.03367 G1 X20.353 Y28.406 E.03662 G2 X19.043 Y27.794 I-1.47 J1.44 E.04902 G2 X18.387 Y28.08 I-.081 J.709 E.02484 G1 X17.732 Y28.969 E.03662 G3 X16.422 Y29.581 I-1.47 J-1.44 E.04902 G3 X15.767 Y29.295 I-.081 J-.709 E.02484 G1 X15.112 Y28.406 E.03662 G2 X13.801 Y27.794 I-1.47 J1.44 E.04902 G2 X13.146 Y28.08 I-.081 J.709 E.02484 G1 X12.491 Y28.969 E.03662 G3 X11.181 Y29.581 I-1.47 J-1.44 E.04902 G3 X10.525 Y29.295 I-.081 J-.709 E.02484 G1 X9.87 Y28.406 E.03662 G2 X8.56 Y27.794 I-1.47 J1.44 E.04902 G2 X7.905 Y28.08 I-.081 J.709 E.02484 G1 X7.25 Y28.969 E.03662 G3 X5.939 Y29.581 I-1.47 J-1.44 E.04902 G3 X4.963 Y28.859 I.119 J-1.182 E.04226 G1 X4.963 Y30.459 E.05308 G1 X5.284 Y30.701 E.01333 G1 X5.939 Y31.589 E.03662 G2 X7.25 Y32.201 I1.47 J-1.44 E.04902 G2 X7.905 Y31.915 I.081 J-.709 E.02484 G1 X8.56 Y31.027 E.03662 G3 X9.87 Y30.415 I1.47 J1.44 E.04902 G3 X10.525 Y30.701 I.081 J.709 E.02484 G1 X11.181 Y31.589 E.03662 G2 X12.491 Y32.201 I1.47 J-1.44 E.04902 G2 X13.146 Y31.915 I.081 J-.709 E.02484 G1 X13.801 Y31.027 E.03662 G3 X15.112 Y30.415 I1.47 J1.44 E.04902 G3 X15.767 Y30.701 I.081 J.709 E.02484 G1 X16.422 Y31.589 E.03662 G2 X17.732 Y32.201 I1.47 J-1.44 E.04902 G2 X18.387 Y31.915 I.081 J-.709 E.02484 G1 X19.043 Y31.027 E.03662 G3 X20.353 Y30.415 I1.47 J1.44 E.04902 G3 X21.008 Y30.701 I.081 J.709 E.02484 G1 X21.663 Y31.589 E.03662 G1 X21.937 Y31.777 E.01101 G1 X21.937 Y32.263 E.01611 G1 X23.079 Y32.263 E.0379 G1 X27.7 Y32.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y17.744 E.57795 G1 X26.951 Y17.737 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X25.323 Y17.737 E.05401 G2 X23.956 Y17.351 I-1.155 J1.48 E.04829 G2 X23.526 Y17.737 I.43 J.913 E.01944 G1 X21.937 Y17.776 E.05273 G1 X8.763 Y7.976 F30000 G1 F16200 G1 X8.763 Y7.891 E.00281 G2 X10.28 Y7.997 I.938 J-2.517 E.05115 G2 X10.853 Y8.576 I1.255 J-.669 E.0274 G2 X12.491 Y8.004 I.198 J-2.062 E.05938 G1 X13.146 Y7.115 E.03662 G1 X13.474 Y6.869 E.0136 G3 X15.112 Y7.441 I.198 J2.062 E.05938 G1 X15.767 Y8.329 E.03662 G1 X16.094 Y8.576 E.0136 G2 X17.732 Y8.004 I.198 J-2.062 E.05938 G1 X18.387 Y7.115 E.03662 G1 X18.715 Y6.869 E.0136 G3 X20.353 Y7.441 I.198 J2.062 E.05938 G1 X21.008 Y8.329 E.03662 G1 X21.336 Y8.576 E.0136 G2 X22.974 Y8.004 I.198 J-2.062 E.05938 G1 X23.629 Y7.115 E.03662 G1 X23.956 Y6.869 E.0136 G3 X25.594 Y7.441 I.198 J2.062 E.05938 G1 X26.249 Y8.329 E.03662 G1 X26.577 Y8.576 E.0136 G2 X27.937 Y8.194 I.211 J-1.863 E.04804 G1 X27.937 Y5.926 E.07525 G1 X27.56 Y5.833 E.01289 G1 X26.905 Y5.383 E.02636 G1 X26.249 Y4.494 E.03662 G1 X25.922 Y4.248 E.0136 G2 X24.284 Y4.82 I-.198 J2.062 E.05938 G1 X23.629 Y5.709 E.03662 G1 X23.301 Y5.955 E.0136 G3 X21.663 Y5.383 I-.198 J-2.062 E.05938 G1 X21.008 Y4.494 E.03662 G1 X20.68 Y4.248 E.0136 G2 X19.043 Y4.82 I-.198 J2.062 E.05938 G1 X18.387 Y5.709 E.03662 G1 X18.06 Y5.955 E.0136 G3 X16.422 Y5.383 I-.198 J-2.062 E.05938 G1 X15.767 Y4.494 E.03662 G1 X15.439 Y4.248 E.0136 G2 X13.801 Y4.82 I-.198 J2.062 E.05938 G1 X13.146 Y5.709 E.03662 G3 X12.303 Y5.948 I-.607 J-.534 E.03072 G3 X11.518 Y7.344 I-2.997 J-.768 E.05372 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X12.009 Y6.733 G1 X12.303 Y5.948 G1 X12.491 Y5.995 G1 X12.675 Y5.973 ;WIPE_END G1 X9.105 Y2.806 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 G1 F16200 G2 X8.763 Y2.909 I.219 J1.349 E.01187 G1 X8.763 Y1.638 E.04216 G3 X10.321 Y2.811 I-.558 J2.362 E.06659 G3 X11.371 Y3.327 I-.662 J2.672 E.03908 G1 X11.836 Y3.212 E.01589 G1 X12.491 Y2.762 E.02636 G1 X13.146 Y1.874 E.03662 G1 X13.474 Y1.627 E.0136 G3 X15.112 Y2.199 I.198 J2.062 E.05938 G1 X15.767 Y3.088 E.03662 G1 X16.094 Y3.335 E.0136 G2 X17.732 Y2.762 I.198 J-2.062 E.05938 G1 X18.387 Y1.874 E.03662 G1 X18.715 Y1.627 E.0136 G3 X20.353 Y2.199 I.198 J2.062 E.05938 G1 X21.008 Y3.088 E.03662 G1 X21.336 Y3.335 E.0136 G2 X22.974 Y2.762 I.198 J-2.062 E.05938 G1 X23.595 Y1.919 E.03474 G3 X23.051 Y.744 I2.611 J-1.923 E.04326 G3 X21.663 Y.142 I.216 J-2.396 E.05104 G1 X21.008 Y-.747 E.03662 G1 X20.68 Y-.993 E.0136 G2 X19.043 Y-.421 I-.198 J2.062 E.05938 G1 X18.387 Y.467 E.03662 G1 X18.06 Y.714 E.0136 G3 X16.422 Y.142 I-.198 J-2.062 E.05938 G1 X15.767 Y-.747 E.03662 G1 X15.439 Y-.993 E.0136 G2 X13.801 Y-.421 I-.198 J2.062 E.05938 G1 X13.146 Y.467 E.03662 G1 X12.819 Y.714 E.0136 G3 X11.181 Y.142 I-.198 J-2.062 E.05938 G1 X10.525 Y-.747 E.03662 G1 X10.198 Y-.993 E.0136 G2 X8.763 Y-.561 I-.208 J1.904 E.05107 G1 X8.763 Y-2.189 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X8.763 Y-.561 G1 X9.07 Y-.771 ;WIPE_END G1 X11.543 Y-7.992 Z2.2 F30000 G1 X29.266 Y-59.737 Z2.2 G1 Z1.8 G1 E.8 F1800 G1 F16200 G1 X27.637 Y-59.737 E.05401 G1 X26.905 Y-59.522 E.02533 G3 X26.343 Y-59.737 I-.095 J-.592 E.02088 G1 X22.396 Y-59.737 E.13094 G1 X21.663 Y-59.522 E.02533 G3 X21.102 Y-59.737 I-.095 J-.592 E.02088 G1 X17.155 Y-59.737 E.13094 G1 X16.422 Y-59.522 E.02533 G3 X15.861 Y-59.737 I-.095 J-.592 E.02088 G1 X14.963 Y-59.737 E.02978 G1 X14.963 Y-58.651 E.03603 G3 X15.767 Y-58.401 I.199 J.779 E.02937 G1 X16.422 Y-57.513 E.03662 G2 X17.732 Y-56.901 I1.47 J-1.44 E.04902 G2 X18.387 Y-57.187 I.081 J-.709 E.02484 G1 X19.043 Y-58.076 E.03662 G3 X20.353 Y-58.687 I1.47 J1.44 E.04902 G3 X21.008 Y-58.401 I.081 J.709 E.02484 G1 X21.663 Y-57.513 E.03662 G2 X22.974 Y-56.901 I1.47 J-1.44 E.04902 G2 X23.629 Y-57.187 I.081 J-.709 E.02484 G1 X24.284 Y-58.076 E.03662 G3 X25.594 Y-58.687 I1.47 J1.44 E.04902 G3 X26.249 Y-58.401 I.081 J.709 E.02484 G1 X26.905 Y-57.513 E.03662 G2 X28.215 Y-56.901 I1.47 J-1.44 E.04902 G2 X28.87 Y-57.187 I.081 J-.709 E.02484 G1 X29.525 Y-58.076 E.03662 G3 X30.835 Y-58.687 I1.47 J1.44 E.04902 G1 X30.937 Y-58.675 E.00339 G1 X30.937 Y-59.737 E.03522 G1 X30.37 Y-59.737 E.01879 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.937 Y-59.737 G1 X30.937 Y-58.675 G1 X30.835 Y-58.687 G1 X30.574 Y-58.623 ;WIPE_END G1 X23.697 Y-55.312 Z2.2 F30000 G1 X-42.652 Y-23.367 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.4 I-.257 J1.189 P1 F30000 G1 X49.464 Y-1.651 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.512 Y-1.66 E.00161 G1 X50 Y-1.758 E.01652 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.425 Y-1.643 E.00329 G1 X49.549 Y-1.224 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.596 Y-1.234 E.00149 G1 X50 Y-1.314 E.01265 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.51 Y-1.217 E.00039 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.596 Y-1.234 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.193 Y-.535 ;WIPE_END G1 X50.42 Y-2.111 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.472 Y-2.542 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.494 Y-2.54 E.00066 G1 X50.991 Y-2.392 E.01594 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.433 Y-2.546 E.01335 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.494 Y-2.54 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.087 Y-1.518 ;WIPE_END G1 X44.498 Y-.712 Z2.4 F30000 G1 X28.129 Y1.025 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.12 Y1.026 E.00028 G3 X25.364 Y-2.019 I-1.928 J-1.025 E.25724 G3 X26.067 Y-2.179 I1.048 J2.987 E.02221 G3 X28.283 Y.632 I.125 J2.18 E.1289 G1 X28.144 Y.988 E.01175 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.12 Y1.026 G1 X28.017 Y1.214 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.626 Y2.143 G1 X26.599 Y2.146 ;WIPE_END G1 X19.149 Y.49 Z2.4 F30000 G1 X7.71 Y-2.052 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.151 J2.165 E.33495 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.27 J2.028 E.24847 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.562 Y4.26 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.719 Y4.122 E.00643 G3 X8.895 Y4.005 I.974 J1.281 E.00648 G3 X9.571 Y3.798 I.785 J1.353 E.02191 G3 X8.534 Y4.287 I.122 J1.604 E.27463 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.719 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.571 Y3.798 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.377 Y3.943 ;WIPE_END G1 X3.169 Y6.452 Z2.4 F30000 G1 X-16.248 Y13.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.151 J-2.165 E.33495 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.054 Y3.776 I.267 J-2.029 E.2488 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.462 Y8.976 Z2.4 F30000 G1 X-29.161 Y6.538 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.165 Y6.535 E.00016 G3 X-31.105 Y4.005 I-1.142 J-1.133 E.16867 G3 X-30.429 Y3.798 I.785 J1.353 E.02191 G3 X-29.027 Y6.377 I.122 J1.604 E.11359 G1 X-29.135 Y6.508 E.00522 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.165 Y6.535 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.974 Y6.86 ;WIPE_END G1 X-32.988 Y-.502 Z2.4 F30000 G1 X-38.899 Y-22.103 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-38.821 Y-22.348 E.00851 G3 X-37.003 Y-23.925 I2.512 J1.059 E.08269 G1 X-36.642 Y-23.995 E.0122 G3 X-38.941 Y-21.999 I.333 J2.706 E.46108 G1 X-38.914 Y-22.066 E.0024 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.514 Y-21.97 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.444 Y-22.19 E.00767 G3 X-36.899 Y-23.531 I2.137 J.901 E.07028 G1 X-36.59 Y-23.59 E.01043 G3 X-38.546 Y-21.892 I.283 J2.301 E.3921 G1 X-38.53 Y-21.933 E.00147 G1 X-38.103 Y-21.828 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.041 Y-22.022 E.00627 G3 X-36.787 Y-23.109 I1.735 J.733 E.05281 G1 X-36.535 Y-23.158 E.00791 G3 X-38.125 Y-21.778 I.229 J1.869 E.29493 G1 X-38.119 Y-21.791 E.00044 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.041 Y-22.022 G1 X-37.933 Y-22.231 G1 X-37.796 Y-22.436 G1 X-37.633 Y-22.621 G1 X-37.448 Y-22.784 G1 X-37.243 Y-22.921 G1 X-37.022 Y-23.03 G1 X-36.787 Y-23.109 G1 X-36.748 Y-23.117 ;WIPE_END G1 X-35.285 Y-30.608 Z2.4 F30000 G1 X-33.804 Y-38.193 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.946 Y-37.929 E.00994 G3 X-37.003 Y-41.925 I-2.362 J-1.36 E.3556 G1 X-36.642 Y-41.995 E.0122 G3 X-33.789 Y-38.248 I.333 J2.706 E.18857 G1 X-33.794 Y-38.231 E.00057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.169 Y-38.373 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.298 Y-38.132 E.00906 G3 X-36.899 Y-41.531 I-2.01 J-1.157 E.30244 G1 X-36.59 Y-41.59 E.01043 G3 X-34.161 Y-38.412 I.283 J2.301 E.16007 G1 X-34.559 Y-38.565 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.674 Y-38.349 E.00752 G3 X-36.787 Y-41.109 I-1.632 J-.94 E.22751 G1 X-36.535 Y-41.158 E.00791 G3 X-34.553 Y-38.599 I.229 J1.869 E.11963 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.674 Y-38.349 G1 X-34.804 Y-38.14 G1 X-34.967 Y-37.955 G1 X-35.152 Y-37.792 G1 X-35.357 Y-37.655 G1 X-35.578 Y-37.546 G1 X-35.812 Y-37.467 G1 X-36.05 Y-37.419 ;WIPE_END G1 X-28.581 Y-38.99 Z2.4 F30000 G1 X-20.278 Y-40.736 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.249 Y-40.784 E.00183 G3 X-19.794 Y-41.235 I1.941 J1.499 E.02132 G3 X-18.485 Y-41.73 I1.506 J2.005 E.04707 G3 X-20.428 Y-40.517 I.176 J2.446 E.43197 G1 X-20.3 Y-40.703 E.0075 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.939 Y-40.51 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.925 Y-40.535 E.00095 G3 X-19.546 Y-40.912 I1.617 J1.248 E.01778 G3 X-18.458 Y-41.324 I1.256 J1.673 E.03911 G3 X-20.074 Y-40.312 I.151 J2.037 E.36001 G1 X-19.962 Y-40.477 E.00661 G1 X-19.58 Y-40.27 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-19.105 Y-40.683 I1.272 J.983 E.01945 G3 X-18.429 Y-40.89 I.785 J1.353 E.02191 G3 X-19.604 Y-40.238 I.122 J1.603 E.26789 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.378 Y-40.48 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.429 Y-40.89 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.821 Y-40.82 ;WIPE_END G1 X-17.075 Y-33.224 Z2.4 F30000 G1 X-15.98 Y-22.072 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.941 Y-21.92 E.0052 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35158 G3 X-18.485 Y-23.73 I1.506 J2.005 E.04707 G3 X-16.043 Y-22.223 I.176 J2.445 E.10167 G1 X-15.995 Y-22.109 E.0041 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.365 Y-21.941 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.333 Y-21.815 E.00432 G3 X-19.546 Y-22.912 I-1.974 J.529 E.29314 G3 X-18.458 Y-23.324 I1.256 J1.673 E.03911 G3 X-16.418 Y-22.067 I.151 J2.038 E.0849 G1 X-16.381 Y-21.978 E.00322 G1 X-16.777 Y-21.801 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.753 Y-21.702 E.00313 G3 X-19.105 Y-22.683 I-1.554 J.416 E.2202 G3 X-18.429 Y-22.89 I.785 J1.353 E.02191 G3 X-16.821 Y-21.901 I.122 J1.604 E.06202 G1 X-16.793 Y-21.838 E.00211 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.753 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.292 Y-20.035 ;WIPE_END G1 X-20.688 Y-13.199 Z2.4 F30000 G1 X-42.748 Y31.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z2.4 F30000 G1 X-42.748 Y51.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z2.4 F30000 G1 X4.752 Y47.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z2.4 F30000 G1 X4.752 Y33.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z2.4 F30000 G1 X27.252 Y31.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z2.4 F30000 G1 X-28.09 Y-52.948 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.944 E.31993 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.944 E.31993 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z2.4 F30000 G1 X7.055 Y-53.79 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z2.4 F30000 G1 X-40.155 Y-5.355 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.444 J1.451 E.19523 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.444 J1.451 E.19523 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.293 Y-2.767 Z2.4 F30000 G1 X-48.783 Y-.895 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.731 Y-1.032 E.00452 G3 X-47.636 Y-2.019 I1.923 J1.033 E.04619 G3 X-46.933 Y-2.179 I1.049 J2.987 E.02221 G3 X-48.896 Y-.636 I.125 J2.18 E.33987 G1 X-48.799 Y-.858 E.00745 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.731 Y-1.032 G1 X-48.617 Y-1.214 G1 X-48.345 Y-1.545 G1 X-48.014 Y-1.817 G1 X-47.636 Y-2.019 G1 X-47.337 Y-2.11 ;WIPE_END G1 X-47.196 Y5.521 Z2.4 F30000 G1 X-46.195 Y59.805 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.199 Y59.808 E.00014 G3 X-45.605 Y57.605 I1.391 J-.806 E.0779 G3 X-44.929 Y57.398 I.785 J1.353 E.02191 G3 X-46.081 Y59.983 I.122 J1.603 E.20416 G1 X-46.173 Y59.839 E.00525 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.199 Y59.808 G1 X-46.288 Y59.616 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.034 Y57.974 ;WIPE_END G1 X-38.405 Y58.177 Z2.4 F30000 G1 X22.805 Y59.805 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.801 Y59.808 E.00014 G3 X23.395 Y57.605 I1.391 J-.806 E.07791 G3 X24.071 Y57.398 I.785 J1.353 E.02191 G3 X22.919 Y59.983 I.122 J1.603 E.20416 G1 X22.827 Y59.839 E.00524 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.801 Y59.808 G1 X22.712 Y59.616 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.964 Y57.972 ;WIPE_END G1 X17.576 Y52.566 Z2.4 F30000 G1 X-40.59 Y-5.79 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-39.537 Y-5.387 Z2.4 F30000 G1 Z2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-39.537 Y-4.737 E.02158 G1 X-39.708 Y-4.737 E.00568 G1 X-39.705 Y-4.36 E.01251 G1 X-40.134 Y-4.36 E.01425 G1 X-39.602 Y-4.071 E.02009 G1 X-39.464 Y-3.743 E.01179 G3 X-40.346 Y-2.105 I-2.986 J-.551 E.06272 G1 X-41.553 Y-1.45 E.04554 G1 X-41.69 Y-1.123 E.01179 G2 X-40.808 Y.515 I2.986 J-.551 E.06272 G1 X-39.602 Y1.171 E.04554 G1 X-39.464 Y1.498 E.01179 G3 X-40.346 Y3.136 I-2.986 J-.551 E.06272 G1 X-41.553 Y3.791 E.04554 G1 X-41.69 Y4.119 E.01179 G2 X-40.808 Y5.757 I2.986 J-.551 E.06272 G1 X-39.602 Y6.412 E.04554 G1 X-39.464 Y6.739 E.01179 G3 X-40.346 Y8.377 I-2.986 J-.551 E.06272 G1 X-41.553 Y9.033 E.04554 G1 X-41.69 Y9.36 E.01179 G2 X-40.808 Y10.998 I2.986 J-.551 E.06272 G1 X-39.602 Y11.653 E.04554 G1 X-39.464 Y11.981 E.01179 G3 X-40.346 Y13.619 I-2.986 J-.551 E.06272 G1 X-41.553 Y14.274 E.04554 G1 X-41.69 Y14.601 E.01179 G2 X-40.808 Y16.239 I2.986 J-.551 E.06272 G1 X-39.602 Y16.894 E.04554 G1 X-39.464 Y17.222 E.01179 G3 X-40.346 Y18.86 I-2.986 J-.551 E.06272 G1 X-41.553 Y19.515 E.04554 G1 X-41.69 Y19.843 E.01179 G2 X-40.808 Y21.481 I2.986 J-.551 E.06272 G1 X-39.602 Y22.136 E.04554 G1 X-39.464 Y22.463 E.01179 G3 X-40.346 Y24.101 I-2.986 J-.551 E.06272 G1 X-41.553 Y24.756 E.04554 G1 X-41.69 Y25.084 E.01179 G2 X-40.808 Y26.722 I2.986 J-.551 E.06272 G1 X-39.602 Y27.377 E.04554 G1 X-39.464 Y27.705 E.01179 G3 X-40.346 Y29.343 I-2.986 J-.551 E.06272 G1 X-41.553 Y29.998 E.04554 G1 X-41.69 Y30.325 E.01179 G2 X-40.808 Y31.963 I2.986 J-.551 E.06272 G1 X-39.602 Y32.618 E.04554 G1 X-39.464 Y32.946 E.01179 G3 X-40.346 Y34.584 I-2.986 J-.551 E.06272 G1 X-41.553 Y35.239 E.04554 G1 X-41.69 Y35.567 E.01179 G2 X-40.808 Y37.205 I2.986 J-.551 E.06272 G1 X-39.602 Y37.86 E.04554 G1 X-39.464 Y38.187 E.01179 G3 X-40.346 Y39.825 I-2.986 J-.551 E.06272 G1 X-41.553 Y40.48 E.04554 G1 X-41.69 Y40.808 E.01179 G2 X-40.808 Y42.446 I2.986 J-.551 E.06272 G1 X-39.602 Y43.101 E.04554 G1 X-39.464 Y43.429 E.01179 G3 X-40.346 Y45.066 I-2.986 J-.551 E.06272 G1 X-41.553 Y45.722 E.04554 G1 X-41.69 Y46.049 E.01179 G2 X-40.808 Y47.687 I2.986 J-.551 E.06272 G1 X-39.602 Y48.342 E.04554 G1 X-39.464 Y48.67 E.01179 G3 X-40.346 Y50.308 I-2.986 J-.551 E.06272 G1 X-41.553 Y50.963 E.04554 G1 X-41.69 Y51.291 E.01179 G2 X-40.808 Y52.928 I2.986 J-.551 E.06272 G1 X-39.602 Y53.584 E.04554 G1 X-39.464 Y53.911 E.01179 G3 X-40.346 Y55.549 I-2.986 J-.551 E.06272 G1 X-41.553 Y56.204 E.04554 G1 X-41.69 Y56.532 E.01179 G2 X-40.808 Y58.17 I2.986 J-.551 E.06272 G1 X-39.602 Y58.825 E.04554 G3 X-39.507 Y59.36 I-.343 J.337 E.01915 G1 X-37.947 Y59.36 E.05173 G1 X-38.932 Y58.825 E.03718 G1 X-39.07 Y58.497 E.01179 G3 X-38.188 Y56.859 I2.986 J.551 E.06272 G1 X-36.981 Y56.204 E.04554 G1 X-36.843 Y55.877 E.01179 G2 X-37.726 Y54.239 I-2.986 J.551 E.06272 G1 X-38.932 Y53.584 E.04554 G1 X-39.07 Y53.256 E.01179 G3 X-38.188 Y51.618 I2.986 J.551 E.06272 G1 X-36.981 Y50.963 E.04554 G1 X-36.843 Y50.635 E.01179 G2 X-37.726 Y48.997 I-2.986 J.551 E.06272 G1 X-38.932 Y48.342 E.04554 G1 X-39.07 Y48.015 E.01179 G3 X-38.188 Y46.377 I2.986 J.551 E.06272 G1 X-36.981 Y45.722 E.04554 G1 X-36.843 Y45.394 E.01179 G2 X-37.726 Y43.756 I-2.986 J.551 E.06272 G1 X-38.932 Y43.101 E.04554 G1 X-39.07 Y42.773 E.01179 G3 X-38.188 Y41.136 I2.986 J.551 E.06272 G1 X-36.981 Y40.48 E.04554 G1 X-36.843 Y40.153 E.01179 G2 X-37.726 Y38.515 I-2.986 J.551 E.06272 G1 X-38.932 Y37.86 E.04554 G1 X-39.07 Y37.532 E.01179 G3 X-38.188 Y35.894 I2.986 J.551 E.06272 G1 X-36.981 Y35.239 E.04554 G1 X-36.843 Y34.911 E.01179 G2 X-37.726 Y33.274 I-2.986 J.551 E.06272 G1 X-38.932 Y32.618 E.04554 G1 X-39.07 Y32.291 E.01179 G3 X-38.188 Y30.653 I2.986 J.551 E.06272 G1 X-36.981 Y29.998 E.04554 G1 X-36.843 Y29.67 E.01179 G2 X-37.726 Y28.032 I-2.986 J.551 E.06272 G1 X-38.932 Y27.377 E.04554 G1 X-39.07 Y27.049 E.01179 G3 X-38.188 Y25.412 I2.986 J.551 E.06272 G1 X-36.981 Y24.756 E.04554 G1 X-36.843 Y24.429 E.01179 G2 X-37.726 Y22.791 I-2.986 J.551 E.06272 G1 X-38.932 Y22.136 E.04554 G1 X-39.07 Y21.808 E.01179 G3 X-38.188 Y20.17 I2.986 J.551 E.06272 G1 X-36.981 Y19.515 E.04554 G1 X-36.843 Y19.188 E.01179 G2 X-37.726 Y17.55 I-2.986 J.551 E.06272 G1 X-38.932 Y16.894 E.04554 G1 X-39.07 Y16.567 E.01179 G3 X-38.188 Y14.929 I2.986 J.551 E.06272 G1 X-36.981 Y14.274 E.04554 G1 X-36.843 Y13.946 E.01179 G2 X-37.726 Y12.308 I-2.986 J.551 E.06272 G1 X-38.932 Y11.653 E.04554 G1 X-39.07 Y11.326 E.01179 G3 X-38.188 Y9.688 I2.986 J.551 E.06272 G1 X-36.981 Y9.033 E.04554 G1 X-36.843 Y8.705 E.01179 G2 X-37.726 Y7.067 I-2.986 J.551 E.06272 G1 X-38.932 Y6.412 E.04554 G1 X-39.07 Y6.084 E.01179 G3 X-38.188 Y4.446 I2.986 J.551 E.06272 G1 X-36.981 Y3.791 E.04554 G1 X-36.843 Y3.464 E.01179 G2 X-37.726 Y1.826 I-2.986 J.551 E.06272 G1 X-38.932 Y1.171 E.04554 G1 X-39.07 Y.843 E.01179 G3 X-38.188 Y-.795 I2.986 J.551 E.06272 G1 X-36.981 Y-1.45 E.04554 G1 X-36.843 Y-1.778 E.01179 G2 X-37.726 Y-3.416 I-2.986 J.551 E.06272 G1 X-38.932 Y-4.071 E.04554 G1 X-39.07 Y-4.398 E.01179 G3 X-38.188 Y-6.036 I2.986 J.551 E.06272 G1 X-36.981 Y-6.691 E.04554 G1 X-36.843 Y-7.019 E.01179 G2 X-37.726 Y-8.657 I-2.986 J.551 E.06272 G1 X-38.932 Y-9.312 E.04554 G1 X-39.07 Y-9.64 E.01179 G3 X-38.188 Y-11.278 I2.986 J.551 E.06272 G1 X-36.981 Y-11.933 E.04554 G1 X-36.843 Y-12.26 E.01179 G2 X-37.726 Y-13.898 I-2.986 J.551 E.06272 G1 X-38.932 Y-14.553 E.04554 G1 X-39.07 Y-14.881 E.01179 G3 X-38.188 Y-16.519 I2.986 J.551 E.06272 G1 X-36.981 Y-17.174 E.04554 G1 X-36.843 Y-17.502 E.01179 G2 X-37.175 Y-18.484 I-2.833 J.41 E.0346 G3 X-37.744 Y-18.728 I1.197 J-3.576 E.02056 G1 X-37.744 Y-18.27 E.0152 G3 X-38.529 Y-18.838 I1.764 J-3.263 E.0322 G2 X-38.932 Y-19.795 I-.863 J-.199 E.0368 G2 X-39.16 Y-19.972 I-.149 J-.044 E.01231 G1 X-39.16 Y-18.489 E.0492 G1 X-38.232 Y-18.977 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-38.068 Y-18.851 E.00573 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-20.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465141 G1 F12000 G1 X-39.333 Y-20.461 E.0101 ;WIDTH:0.441848 G3 X-39.356 Y-20.68 I3.325 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-20.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-21.682 I8.953 J-.421 E.02139 ;WIDTH:0.39933 G3 X-39.356 Y-21.898 I3.315 J.206 E.0063 ;WIDTH:0.439601 G1 X-39.336 Y-22.092 E.00629 ;WIDTH:0.475859 G3 X-39.285 Y-22.405 I4.614 J.601 E.0112 G1 X-38.99 Y-22.672 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G3 X-38.51 Y-23.334 I3.148 J1.778 E.0227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.349 Y-23.895 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-38.194 Y-24.031 E.00684 G1 X-38.194 Y-23.53 E.01664 G3 X-37.413 Y-24.009 I4.504 J6.464 E.03041 G1 X-37.726 Y-24.381 E.0161 G1 X-38.932 Y-25.036 E.04554 G3 X-39.003 Y-25.691 I.443 J-.379 E.02323 G3 X-38.188 Y-27.001 I2.424 J.599 E.05204 G1 X-36.981 Y-27.657 E.04554 G2 X-36.911 Y-28.312 I-.443 J-.379 E.02323 G2 X-37.726 Y-29.622 I-2.424 J.599 E.05204 G1 X-38.932 Y-30.277 E.04554 G3 X-39.003 Y-30.932 I.443 J-.379 E.02323 G3 X-38.188 Y-32.243 I2.424 J.599 E.05204 G1 X-36.981 Y-32.898 E.04554 G2 X-36.911 Y-33.553 I-.443 J-.379 E.02323 G2 X-37.726 Y-34.863 I-2.424 J.599 E.05204 G1 X-38.932 Y-35.519 E.04554 G3 X-39.003 Y-36.174 I.443 J-.379 E.02323 G1 X-38.645 Y-36.94 E.02805 G1 X-38.194 Y-36.545 E.01987 G1 X-38.194 Y-37.046 E.01664 G2 X-35.76 Y-36.403 I1.948 J-2.447 E.08596 G1 X-35.567 Y-36.174 E.00995 G1 X-34.361 Y-35.519 E.04554 G3 X-34.29 Y-34.863 I-.443 J.379 E.02323 G3 X-35.105 Y-33.553 I-2.424 J-.599 E.05204 G1 X-36.311 Y-32.898 E.04554 G2 X-36.382 Y-32.243 I.443 J.379 E.02323 G2 X-35.567 Y-30.932 I2.424 J-.599 E.05204 G1 X-34.361 Y-30.277 E.04554 G3 X-34.29 Y-29.622 I-.443 J.379 E.02323 G3 X-35.105 Y-28.312 I-2.424 J-.599 E.05204 G1 X-36.311 Y-27.657 E.04554 G2 X-36.382 Y-27.001 I.443 J.379 E.02323 M73 P30 R55 G2 X-35.567 Y-25.691 I2.424 J-.599 E.05204 G1 X-34.361 Y-25.036 E.04554 G3 X-34.29 Y-24.381 I-.443 J.379 E.02323 G1 X-34.595 Y-23.678 E.02541 G3 X-33.361 Y-21.267 I-1.729 J2.407 E.09331 G1 X-32.946 Y-21.76 E.02136 G1 X-31.74 Y-22.415 E.04554 G2 X-31.669 Y-23.07 I-.443 J-.379 E.02323 G2 X-32.484 Y-24.381 I-2.424 J.599 E.05204 G1 X-33.691 Y-25.036 E.04554 G3 X-33.761 Y-25.691 I.443 J-.379 E.02323 G3 X-32.946 Y-27.001 I2.424 J.599 E.05204 G1 X-31.74 Y-27.657 E.04554 G2 X-31.669 Y-28.312 I-.443 J-.379 E.02323 G2 X-32.484 Y-29.622 I-2.424 J.599 E.05204 G1 X-33.691 Y-30.277 E.04554 G3 X-33.761 Y-30.932 I.443 J-.379 E.02323 G3 X-32.946 Y-32.243 I2.424 J.599 E.05204 G1 X-31.74 Y-32.898 E.04554 G2 X-31.669 Y-33.553 I-.443 J-.379 E.02323 G2 X-32.484 Y-34.863 I-2.424 J.599 E.05204 G1 X-33.691 Y-35.519 E.04554 G3 X-33.761 Y-36.174 I.443 J-.379 E.02323 G3 X-32.946 Y-37.484 I2.424 J.599 E.05204 G1 X-31.74 Y-38.139 E.04554 G2 X-31.669 Y-38.794 I-.443 J-.379 E.02323 G2 X-32.484 Y-40.105 I-2.424 J.599 E.05204 G1 X-33.691 Y-40.76 E.04554 G3 X-33.761 Y-41.415 I.443 J-.379 E.02323 G3 X-32.946 Y-42.725 I2.424 J.599 E.05204 G1 X-31.74 Y-43.381 E.04554 G2 X-31.669 Y-44.036 I-.443 J-.379 E.02323 G2 X-32.484 Y-45.346 I-2.424 J.599 E.05204 G1 X-33.691 Y-46.001 E.04554 G3 X-33.761 Y-46.656 I.443 J-.379 E.02323 G3 X-32.946 Y-47.967 I2.424 J.599 E.05204 G1 X-31.74 Y-48.622 E.04554 G2 X-31.669 Y-49.277 I-.443 J-.379 E.02323 G2 X-32.484 Y-50.587 I-2.424 J.599 E.05204 G1 X-33.691 Y-51.242 E.04554 G3 X-33.761 Y-51.898 I.443 J-.379 E.02323 G1 X-33.575 Y-52.36 E.01654 G1 X-31.946 Y-52.36 E.05401 G1 X-26.872 Y-52.36 F30000 G1 F16200 G1 X-26.66 Y-52.36 E.00705 G1 X-26.66 Y-53.776 E.04697 G1 X-26.499 Y-53.863 E.00609 G2 X-26.428 Y-54.518 I-.443 J-.379 E.02323 G1 X-26.66 Y-55.092 E.02052 G1 X-26.66 Y-59.017 E.13021 G2 X-26.391 Y-59.36 I-.08 J-.339 E.01561 G1 X-25.359 Y-59.36 E.03425 G1 X-25.829 Y-59.104 E.01775 G2 X-25.899 Y-58.449 I.443 J.379 E.02323 G2 X-25.084 Y-57.139 I2.424 J-.599 E.05204 G1 X-23.878 Y-56.484 E.04554 G3 X-23.807 Y-55.829 I-.443 J.379 E.02323 G3 X-24.622 Y-54.518 I-2.424 J-.599 E.05204 G1 X-25.829 Y-53.863 E.04554 G2 X-25.899 Y-53.208 I.443 J.379 E.02323 G2 X-25.084 Y-51.898 I2.424 J-.599 E.05204 G1 X-23.878 Y-51.242 E.04554 G3 X-23.807 Y-50.587 I-.443 J.379 E.02323 G3 X-24.622 Y-49.277 I-2.424 J-.599 E.05204 G1 X-25.829 Y-48.622 E.04554 G2 X-25.899 Y-47.967 I.443 J.379 E.02323 G2 X-25.084 Y-46.656 I2.424 J-.599 E.05204 G1 X-23.878 Y-46.001 E.04554 G3 X-23.807 Y-45.346 I-.443 J.379 E.02323 G3 X-24.622 Y-44.036 I-2.424 J-.599 E.05204 G1 X-25.829 Y-43.381 E.04554 G2 X-25.899 Y-42.725 I.443 J.379 E.02323 G2 X-25.084 Y-41.415 I2.424 J-.599 E.05204 G1 X-23.878 Y-40.76 E.04554 G3 X-23.807 Y-40.105 I-.443 J.379 E.02323 G3 X-24.622 Y-38.794 I-2.424 J-.599 E.05204 G1 X-25.829 Y-38.139 E.04554 G2 X-25.899 Y-37.484 I.443 J.379 E.02323 G2 X-25.084 Y-36.174 I2.424 J-.599 E.05204 G1 X-23.878 Y-35.519 E.04554 G3 X-23.807 Y-34.863 I-.443 J.379 E.02323 G3 X-24.622 Y-33.553 I-2.424 J-.599 E.05204 G1 X-25.829 Y-32.898 E.04554 G2 X-25.899 Y-32.243 I.443 J.379 E.02323 G2 X-25.084 Y-30.932 I2.424 J-.599 E.05204 G1 X-23.878 Y-30.277 E.04554 G3 X-23.807 Y-29.622 I-.443 J.379 E.02323 G3 X-24.622 Y-28.312 I-2.424 J-.599 E.05204 G1 X-25.829 Y-27.657 E.04554 G2 X-25.899 Y-27.001 I.443 J.379 E.02323 G2 X-25.084 Y-25.691 I2.424 J-.599 E.05204 G1 X-23.878 Y-25.036 E.04554 G3 X-23.807 Y-24.381 I-.443 J.379 E.02323 G3 X-24.622 Y-23.07 I-2.424 J-.599 E.05204 G1 X-25.829 Y-22.415 E.04554 G2 X-25.899 Y-21.76 I.443 J.379 E.02323 G2 X-25.084 Y-20.45 I2.424 J-.599 E.05204 G1 X-23.878 Y-19.795 E.04554 G3 X-23.807 Y-19.14 I-.443 J.379 E.02323 G3 X-24.622 Y-17.829 I-2.424 J-.599 E.05204 G1 X-25.829 Y-17.174 E.04554 G2 X-25.899 Y-16.519 I.443 J.379 E.02323 G2 X-25.084 Y-15.209 I2.424 J-.599 E.05204 G1 X-23.878 Y-14.553 E.04554 G3 X-23.807 Y-13.898 I-.443 J.379 E.02323 G3 X-24.622 Y-12.588 I-2.424 J-.599 E.05204 G1 X-25.829 Y-11.933 E.04554 G2 X-25.899 Y-11.278 I.443 J.379 E.02323 G2 X-25.084 Y-9.967 I2.424 J-.599 E.05204 G1 X-23.878 Y-9.312 E.04554 G3 X-23.807 Y-8.657 I-.443 J.379 E.02323 G3 X-24.622 Y-7.347 I-2.424 J-.599 E.05204 G1 X-25.829 Y-6.691 E.04554 G2 X-25.899 Y-6.036 I.443 J.379 E.02323 G2 X-25.084 Y-4.726 I2.424 J-.599 E.05204 G1 X-23.878 Y-4.071 E.04554 G3 X-23.807 Y-3.416 I-.443 J.379 E.02323 G1 X-24.173 Y-2.64 E.02844 G1 X-26.644 Y-2.64 E.08197 G1 X-27.243 Y-3.416 E.0325 G1 X-28.449 Y-4.071 E.04554 G3 X-28.52 Y-4.726 I.443 J-.379 E.02323 G3 X-27.705 Y-6.036 I2.424 J.599 E.05204 G1 X-26.499 Y-6.691 E.04554 G2 X-26.428 Y-7.347 I-.443 J-.379 E.02323 G2 X-27.243 Y-8.657 I-2.424 J.599 E.05204 G1 X-28.449 Y-9.312 E.04554 G3 X-28.52 Y-9.967 I.443 J-.379 E.02323 G3 X-27.705 Y-11.278 I2.424 J.599 E.05204 G1 X-26.499 Y-11.933 E.04554 G2 X-26.428 Y-12.588 I-.443 J-.379 E.02323 G2 X-27.243 Y-13.898 I-2.424 J.599 E.05204 G1 X-28.449 Y-14.553 E.04554 G3 X-28.52 Y-15.209 I.443 J-.379 E.02323 G3 X-27.705 Y-16.519 I2.424 J.599 E.05204 G1 X-26.499 Y-17.174 E.04554 G2 X-26.428 Y-17.829 I-.443 J-.379 E.02323 G2 X-27.243 Y-19.14 I-2.424 J.599 E.05204 G1 X-28.449 Y-19.795 E.04554 G3 X-28.52 Y-20.45 I.443 J-.379 E.02323 G3 X-27.705 Y-21.76 I2.424 J.599 E.05204 G1 X-26.499 Y-22.415 E.04554 G2 X-26.428 Y-23.07 I-.443 J-.379 E.02323 G2 X-27.243 Y-24.381 I-2.424 J.599 E.05204 G1 X-28.449 Y-25.036 E.04554 G3 X-28.52 Y-25.691 I.443 J-.379 E.02323 G3 X-27.705 Y-27.001 I2.424 J.599 E.05204 G1 X-26.499 Y-27.657 E.04554 G2 X-26.428 Y-28.312 I-.443 J-.379 E.02323 G2 X-27.243 Y-29.622 I-2.424 J.599 E.05204 G1 X-28.449 Y-30.277 E.04554 G3 X-28.52 Y-30.932 I.443 J-.379 E.02323 G3 X-27.705 Y-32.243 I2.424 J.599 E.05204 G1 X-26.499 Y-32.898 E.04554 G2 X-26.428 Y-33.553 I-.443 J-.379 E.02323 G2 X-27.243 Y-34.863 I-2.424 J.599 E.05204 G1 X-28.449 Y-35.519 E.04554 G3 X-28.52 Y-36.174 I.443 J-.379 E.02323 G3 X-27.705 Y-37.484 I2.424 J.599 E.05204 G1 X-26.499 Y-38.139 E.04554 G2 X-26.428 Y-38.794 I-.443 J-.379 E.02323 G2 X-27.243 Y-40.105 I-2.424 J.599 E.05204 G1 X-28.449 Y-40.76 E.04554 G3 X-28.52 Y-41.415 I.443 J-.379 E.02323 G3 X-27.705 Y-42.725 I2.424 J.599 E.05204 G1 X-26.499 Y-43.381 E.04554 G2 X-26.428 Y-44.036 I-.443 J-.379 E.02323 G2 X-27.243 Y-45.346 I-2.424 J.599 E.05204 G1 X-28.449 Y-46.001 E.04554 G3 X-28.52 Y-46.656 I.443 J-.379 E.02323 G3 X-27.705 Y-47.967 I2.424 J.599 E.05204 G1 X-26.499 Y-48.622 E.04554 G2 X-26.428 Y-49.277 I-.443 J-.379 E.02323 G2 X-27.243 Y-50.587 I-2.424 J.599 E.05204 G1 X-28.449 Y-51.242 E.04554 G3 X-28.52 Y-51.898 I.443 J-.379 E.02323 G1 X-28.333 Y-52.36 E.01654 G1 X-30.714 Y-52.36 E.07897 G1 X-30.326 Y-51.898 E.02002 G1 X-29.119 Y-51.242 E.04554 G3 X-29.049 Y-50.587 I-.443 J.379 E.02323 G3 X-29.864 Y-49.277 I-2.424 J-.599 E.05204 G1 X-31.07 Y-48.622 E.04554 G2 X-31.141 Y-47.967 I.443 J.379 E.02323 G2 X-30.326 Y-46.656 I2.424 J-.599 E.05204 G1 X-29.119 Y-46.001 E.04554 G3 X-29.049 Y-45.346 I-.443 J.379 E.02323 G3 X-29.864 Y-44.036 I-2.424 J-.599 E.05204 G1 X-31.07 Y-43.381 E.04554 G2 X-31.141 Y-42.725 I.443 J.379 E.02323 G2 X-30.326 Y-41.415 I2.424 J-.599 E.05204 G1 X-29.119 Y-40.76 E.04554 G3 X-29.049 Y-40.105 I-.443 J.379 E.02323 G3 X-29.864 Y-38.794 I-2.424 J-.599 E.05204 G1 X-31.07 Y-38.139 E.04554 G2 X-31.141 Y-37.484 I.443 J.379 E.02323 G2 X-30.326 Y-36.174 I2.424 J-.599 E.05204 G1 X-29.119 Y-35.519 E.04554 G3 X-29.049 Y-34.863 I-.443 J.379 E.02323 G3 X-29.864 Y-33.553 I-2.424 J-.599 E.05204 G1 X-31.07 Y-32.898 E.04554 G2 X-31.141 Y-32.243 I.443 J.379 E.02323 G2 X-30.326 Y-30.932 I2.424 J-.599 E.05204 G1 X-29.119 Y-30.277 E.04554 G3 X-29.049 Y-29.622 I-.443 J.379 E.02323 G3 X-29.864 Y-28.312 I-2.424 J-.599 E.05204 G1 X-31.07 Y-27.657 E.04554 G2 X-31.141 Y-27.001 I.443 J.379 E.02323 G2 X-30.326 Y-25.691 I2.424 J-.599 E.05204 G1 X-29.119 Y-25.036 E.04554 G3 X-29.049 Y-24.381 I-.443 J.379 E.02323 G3 X-29.864 Y-23.07 I-2.424 J-.599 E.05204 G1 X-31.07 Y-22.415 E.04554 G2 X-31.141 Y-21.76 I.443 J.379 E.02323 G2 X-30.326 Y-20.45 I2.424 J-.599 E.05204 G1 X-29.119 Y-19.795 E.04554 G3 X-29.049 Y-19.14 I-.443 J.379 E.02323 G3 X-29.864 Y-17.829 I-2.424 J-.599 E.05204 G1 X-31.07 Y-17.174 E.04554 G2 X-31.141 Y-16.519 I.443 J.379 E.02323 G2 X-30.326 Y-15.209 I2.424 J-.599 E.05204 G1 X-29.119 Y-14.553 E.04554 G3 X-29.049 Y-13.898 I-.443 J.379 E.02323 G3 X-29.864 Y-12.588 I-2.424 J-.599 E.05204 M73 P31 R55 G1 X-31.07 Y-11.933 E.04554 G2 X-31.141 Y-11.278 I.443 J.379 E.02323 G2 X-30.326 Y-9.967 I2.424 J-.599 E.05204 G1 X-29.119 Y-9.312 E.04554 G3 X-29.049 Y-8.657 I-.443 J.379 E.02323 G3 X-29.864 Y-7.347 I-2.424 J-.599 E.05204 G1 X-31.07 Y-6.691 E.04554 G2 X-31.141 Y-6.036 I.443 J.379 E.02323 G2 X-30.326 Y-4.726 I2.424 J-.599 E.05204 G1 X-29.119 Y-4.071 E.04554 G3 X-29.049 Y-3.416 I-.443 J.379 E.02323 G1 X-29.414 Y-2.64 E.02844 G1 X-29.74 Y-2.64 E.01081 G1 X-29.74 Y-2.252 E.01287 G1 X-29.864 Y-2.105 E.00636 G1 X-31.07 Y-1.45 E.04554 G2 X-31.141 Y-.795 I.443 J.379 E.02323 G2 X-29.74 Y.833 I2.271 J-.537 E.07403 G1 X-29.74 Y2.415 E.05245 G2 X-31.82 Y2.763 I-.5 J3.396 E.0711 G1 X-31.934 Y2.481 E.0101 G1 X-32.484 Y1.826 E.02838 G1 X-33.691 Y1.171 E.04554 G3 X-33.761 Y.515 I.443 J-.379 E.02323 G3 X-32.946 Y-.795 I2.424 J.599 E.05204 G1 X-31.74 Y-1.45 E.04554 G2 X-31.669 Y-2.105 I-.443 J-.379 E.02323 G2 X-32.484 Y-3.416 I-2.424 J.599 E.05204 G1 X-33.691 Y-4.071 E.04554 G3 X-33.761 Y-4.726 I.443 J-.379 E.02323 G3 X-32.946 Y-6.036 I2.424 J.599 E.05204 G1 X-31.74 Y-6.691 E.04554 G2 X-31.669 Y-7.347 I-.443 J-.379 E.02323 G2 X-32.484 Y-8.657 I-2.424 J.599 E.05204 G1 X-33.691 Y-9.312 E.04554 G3 X-33.761 Y-9.967 I.443 J-.379 E.02323 G3 X-32.946 Y-11.278 I2.424 J.599 E.05204 G1 X-31.74 Y-11.933 E.04554 G2 X-31.669 Y-12.588 I-.443 J-.379 E.02323 G2 X-32.484 Y-13.898 I-2.424 J.599 E.05204 G1 X-33.691 Y-14.553 E.04554 G3 X-33.761 Y-15.209 I.443 J-.379 E.02323 G3 X-32.946 Y-16.519 I2.424 J.599 E.05204 G1 X-31.74 Y-17.174 E.04554 G2 X-31.669 Y-17.829 I-.443 J-.379 E.02323 G2 X-32.484 Y-19.14 I-2.424 J.599 E.05204 G1 X-33.691 Y-19.795 E.04554 G1 X-33.725 Y-19.875 E.0029 G3 X-34.29 Y-19.14 I-3.153 J-1.837 E.03086 G3 X-35.105 Y-17.829 I-2.424 J-.599 E.05204 G1 X-36.311 Y-17.174 E.04554 G2 X-36.382 Y-16.519 I.443 J.379 E.02323 G2 X-35.567 Y-15.209 I2.424 J-.599 E.05204 G1 X-34.361 Y-14.553 E.04554 G3 X-34.29 Y-13.898 I-.443 J.379 E.02323 G3 X-35.105 Y-12.588 I-2.424 J-.599 E.05204 G1 X-36.311 Y-11.933 E.04554 G2 X-36.382 Y-11.278 I.443 J.379 E.02323 G2 X-35.567 Y-9.967 I2.424 J-.599 E.05204 G1 X-34.361 Y-9.312 E.04554 G3 X-34.29 Y-8.657 I-.443 J.379 E.02323 G3 X-35.105 Y-7.347 I-2.424 J-.599 E.05204 G1 X-36.311 Y-6.691 E.04554 G2 X-36.382 Y-6.036 I.443 J.379 E.02323 G2 X-35.567 Y-4.726 I2.424 J-.599 E.05204 G1 X-34.361 Y-4.071 E.04554 G3 X-34.29 Y-3.416 I-.443 J.379 E.02323 G3 X-35.105 Y-2.105 I-2.424 J-.599 E.05204 G1 X-36.311 Y-1.45 E.04554 G2 X-36.382 Y-.795 I.443 J.379 E.02323 G2 X-35.567 Y.515 I2.424 J-.599 E.05204 G1 X-34.361 Y1.171 E.04554 G3 X-34.29 Y1.826 I-.443 J.379 E.02323 G3 X-35.105 Y3.136 I-2.424 J-.599 E.05204 G1 X-36.311 Y3.791 E.04554 G2 X-36.382 Y4.446 I.443 J.379 E.02323 G2 X-35.567 Y5.757 I2.424 J-.599 E.05204 G1 X-34.361 Y6.412 E.04554 G3 X-34.29 Y7.067 I-.443 J.379 E.02323 G3 X-35.105 Y8.377 I-2.424 J-.599 E.05204 G1 X-36.311 Y9.033 E.04554 G2 X-36.382 Y9.688 I.443 J.379 E.02323 G2 X-35.567 Y10.998 I2.424 J-.599 E.05204 G1 X-34.361 Y11.653 E.04554 G3 X-34.29 Y12.308 I-.443 J.379 E.02323 G3 X-35.105 Y13.619 I-2.424 J-.599 E.05204 G1 X-36.311 Y14.274 E.04554 G2 X-36.382 Y14.929 I.443 J.379 E.02323 G2 X-35.567 Y16.239 I2.424 J-.599 E.05204 G1 X-34.361 Y16.894 E.04554 G3 X-34.29 Y17.55 I-.443 J.379 E.02323 G3 X-35.105 Y18.86 I-2.424 J-.599 E.05204 G1 X-36.311 Y19.515 E.04554 G2 X-36.382 Y20.17 I.443 J.379 E.02323 G2 X-35.567 Y21.481 I2.424 J-.599 E.05204 G1 X-34.361 Y22.136 E.04554 G3 X-34.29 Y22.791 I-.443 J.379 E.02323 G3 X-35.105 Y24.101 I-2.424 J-.599 E.05204 G1 X-36.311 Y24.756 E.04554 G2 X-36.382 Y25.412 I.443 J.379 E.02323 G2 X-35.567 Y26.722 I2.424 J-.599 E.05204 G1 X-34.361 Y27.377 E.04554 G3 X-34.29 Y28.032 I-.443 J.379 E.02323 G3 X-35.105 Y29.343 I-2.424 J-.599 E.05204 G1 X-36.311 Y29.998 E.04554 G2 X-36.382 Y30.653 I.443 J.379 E.02323 G2 X-35.567 Y31.963 I2.424 J-.599 E.05204 G1 X-34.361 Y32.618 E.04554 G3 X-34.29 Y33.274 I-.443 J.379 E.02323 G3 X-35.105 Y34.584 I-2.424 J-.599 E.05204 G1 X-36.311 Y35.239 E.04554 G2 X-36.382 Y35.894 I.443 J.379 E.02323 G2 X-35.567 Y37.205 I2.424 J-.599 E.05204 G1 X-34.361 Y37.86 E.04554 G3 X-34.29 Y38.515 I-.443 J.379 E.02323 G3 X-35.105 Y39.825 I-2.424 J-.599 E.05204 G1 X-36.311 Y40.48 E.04554 G2 X-36.382 Y41.136 I.443 J.379 E.02323 G2 X-35.567 Y42.446 I2.424 J-.599 E.05204 G1 X-34.361 Y43.101 E.04554 G3 X-34.29 Y43.756 I-.443 J.379 E.02323 G3 X-35.105 Y45.066 I-2.424 J-.599 E.05204 G1 X-36.311 Y45.722 E.04554 G2 X-36.382 Y46.377 I.443 J.379 E.02323 G2 X-35.567 Y47.687 I2.424 J-.599 E.05204 G1 X-34.361 Y48.342 E.04554 G3 X-34.29 Y48.997 I-.443 J.379 E.02323 G3 X-35.105 Y50.308 I-2.424 J-.599 E.05204 G1 X-36.311 Y50.963 E.04554 G2 X-36.382 Y51.618 I.443 J.379 E.02323 G2 X-35.567 Y52.928 I2.424 J-.599 E.05204 G1 X-34.361 Y53.584 E.04554 G3 X-34.29 Y54.239 I-.443 J.379 E.02323 G3 X-35.105 Y55.549 I-2.424 J-.599 E.05204 G1 X-36.311 Y56.204 E.04554 G2 X-36.382 Y56.859 I.443 J.379 E.02323 G2 X-35.567 Y58.17 I2.424 J-.599 E.05204 G1 X-34.361 Y58.825 E.04554 G3 X-34.265 Y59.36 I-.343 J.337 E.01915 G1 X-32.706 Y59.36 E.05173 G1 X-33.691 Y58.825 E.03718 G3 X-33.761 Y58.17 I.443 J-.379 E.02323 G3 X-32.946 Y56.859 I2.424 J.599 E.05204 G1 X-31.74 Y56.204 E.04554 G2 X-31.669 Y55.549 I-.443 J-.379 E.02323 G2 X-32.484 Y54.239 I-2.424 J.599 E.05204 G1 X-33.691 Y53.584 E.04554 G3 X-33.761 Y52.928 I.443 J-.379 E.02323 G3 X-32.946 Y51.618 I2.424 J.599 E.05204 G1 X-31.74 Y50.963 E.04554 G2 X-31.669 Y50.308 I-.443 J-.379 E.02323 G2 X-32.484 Y48.997 I-2.424 J.599 E.05204 G1 X-33.691 Y48.342 E.04554 G3 X-33.761 Y47.687 I.443 J-.379 E.02323 G3 X-32.946 Y46.377 I2.424 J.599 E.05204 G1 X-31.74 Y45.722 E.04554 G2 X-31.669 Y45.066 I-.443 J-.379 E.02323 G2 X-32.484 Y43.756 I-2.424 J.599 E.05204 G1 X-33.691 Y43.101 E.04554 G3 X-33.761 Y42.446 I.443 J-.379 E.02323 G3 X-32.946 Y41.136 I2.424 J.599 E.05204 G1 X-31.74 Y40.48 E.04554 G2 X-31.669 Y39.825 I-.443 J-.379 E.02323 G2 X-32.484 Y38.515 I-2.424 J.599 E.05204 G1 X-33.691 Y37.86 E.04554 G3 X-33.761 Y37.205 I.443 J-.379 E.02323 G3 X-32.946 Y35.894 I2.424 J.599 E.05204 G1 X-31.74 Y35.239 E.04554 G2 X-31.669 Y34.584 I-.443 J-.379 E.02323 G2 X-32.484 Y33.274 I-2.424 J.599 E.05204 G1 X-33.691 Y32.618 E.04554 G3 X-33.761 Y31.963 I.443 J-.379 E.02323 G3 X-32.946 Y30.653 I2.424 J.599 E.05204 G1 X-31.74 Y29.998 E.04554 G2 X-31.669 Y29.343 I-.443 J-.379 E.02323 G2 X-32.484 Y28.032 I-2.424 J.599 E.05204 G1 X-33.691 Y27.377 E.04554 G3 X-33.761 Y26.722 I.443 J-.379 E.02323 G3 X-32.946 Y25.412 I2.424 J.599 E.05204 G1 X-31.74 Y24.756 E.04554 G2 X-31.669 Y24.101 I-.443 J-.379 E.02323 G2 X-32.484 Y22.791 I-2.424 J.599 E.05204 G1 X-33.691 Y22.136 E.04554 G3 X-33.761 Y21.481 I.443 J-.379 E.02323 G3 X-32.946 Y20.17 I2.424 J.599 E.05204 G1 X-31.74 Y19.515 E.04554 G2 X-31.669 Y18.86 I-.443 J-.379 E.02323 G2 X-32.484 Y17.55 I-2.424 J.599 E.05204 G1 X-33.691 Y16.894 E.04554 G3 X-33.761 Y16.239 I.443 J-.379 E.02323 G3 X-32.946 Y14.929 I2.424 J.599 E.05204 G1 X-31.74 Y14.274 E.04554 G2 X-31.669 Y13.619 I-.443 J-.379 E.02323 G2 X-32.484 Y12.308 I-2.424 J.599 E.05204 G1 X-33.691 Y11.653 E.04554 G3 X-33.761 Y10.998 I.443 J-.379 E.02323 G3 X-32.946 Y9.688 I2.424 J.599 E.05204 G1 X-31.74 Y9.033 E.04554 G2 X-31.804 Y8.045 I-.864 J-.44 E.03445 G3 X-33.003 Y6.785 I1.985 J-3.091 E.05826 G1 X-33.691 Y6.412 E.02595 G3 X-33.761 Y5.757 I.443 J-.379 E.02323 G3 X-33.288 Y4.853 I1.627 J.277 E.0344 G3 X-32.591 Y3.406 I2.992 J.55 E.05394 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-32.936 Y3.878 G1 X-33.112 Y4.235 G1 X-33.288 Y4.853 G1 X-33.497 Y5.102 G1 X-33.515 Y5.148 ;WIPE_END G1 X-29.74 Y9.808 Z2.4 F30000 G1 Z2 G1 E.8 F1800 G1 F16200 G1 X-29.74 Y8.385 E.04719 G3 X-29.943 Y8.42 I-.234 J-.752 E.00684 G1 X-31.07 Y9.033 E.04256 G1 X-31.208 Y9.36 E.01179 G2 X-30.326 Y10.998 I2.986 J-.551 E.06272 G1 X-29.74 Y11.316 E.0221 G1 X-29.74 Y13.472 E.07151 G1 X-29.864 Y13.619 E.00636 G1 X-31.07 Y14.274 E.04554 G1 X-31.208 Y14.601 E.01179 G2 X-30.326 Y16.239 I2.986 J-.551 E.06272 G1 X-29.119 Y16.894 E.04554 G1 X-28.981 Y17.222 E.01179 G3 X-29.864 Y18.86 I-2.986 J-.551 E.06272 G1 X-31.07 Y19.515 E.04554 G1 X-31.208 Y19.843 E.01179 G2 X-30.326 Y21.481 I2.986 J-.551 E.06272 G1 X-29.119 Y22.136 E.04554 G1 X-28.981 Y22.463 E.01179 G3 X-29.864 Y24.101 I-2.986 J-.551 E.06272 G1 X-31.07 Y24.756 E.04554 G1 X-31.208 Y25.084 E.01179 G2 X-30.326 Y26.722 I2.986 J-.551 E.06272 G1 X-29.119 Y27.377 E.04554 G1 X-28.981 Y27.705 E.01179 G3 X-29.864 Y29.343 I-2.986 J-.551 E.06272 G1 X-31.07 Y29.998 E.04554 G1 X-31.208 Y30.325 E.01179 G2 X-30.326 Y31.963 I2.986 J-.551 E.06272 G1 X-29.119 Y32.618 E.04554 G1 X-28.981 Y32.946 E.01179 G3 X-29.864 Y34.584 I-2.986 J-.551 E.06272 G1 X-31.07 Y35.239 E.04554 G1 X-31.208 Y35.567 E.01179 G2 X-30.326 Y37.205 I2.986 J-.551 E.06272 G1 X-29.119 Y37.86 E.04554 G1 X-28.981 Y38.187 E.01179 G3 X-29.864 Y39.825 I-2.986 J-.551 E.06272 G1 X-31.07 Y40.48 E.04554 G1 X-31.208 Y40.808 E.01179 G2 X-30.326 Y42.446 I2.986 J-.551 E.06272 G1 X-29.119 Y43.101 E.04554 G1 X-28.981 Y43.429 E.01179 G3 X-29.864 Y45.066 I-2.986 J-.551 E.06272 G1 X-31.07 Y45.722 E.04554 G1 X-31.208 Y46.049 E.01179 G2 X-30.326 Y47.687 I2.986 J-.551 E.06272 G1 X-29.119 Y48.342 E.04554 G1 X-28.981 Y48.67 E.01179 G3 X-29.864 Y50.308 I-2.986 J-.551 E.06272 G1 X-31.07 Y50.963 E.04554 G1 X-31.208 Y51.291 E.01179 G2 X-30.326 Y52.928 I2.986 J-.551 E.06272 G1 X-29.119 Y53.584 E.04554 G1 X-28.981 Y53.911 E.01179 G3 X-29.864 Y55.549 I-2.986 J-.551 E.06272 G1 X-31.07 Y56.204 E.04554 G1 X-31.208 Y56.532 E.01179 G2 X-30.326 Y58.17 I2.986 J-.551 E.06272 G1 X-29.119 Y58.825 E.04554 G3 X-29.024 Y59.36 I-.343 J.337 E.01915 G1 X-27.464 Y59.36 E.05173 G1 X-28.449 Y58.825 E.03718 G1 X-28.587 Y58.497 E.01179 G3 X-27.705 Y56.859 I2.986 J.551 E.06272 G1 X-26.499 Y56.204 E.04554 G1 X-26.361 Y55.877 E.01179 G2 X-27.243 Y54.239 I-2.986 J.551 E.06272 G1 X-28.449 Y53.584 E.04554 G1 X-28.587 Y53.256 E.01179 G3 X-27.705 Y51.618 I2.986 J.551 E.06272 G1 X-26.499 Y50.963 E.04554 G1 X-26.361 Y50.635 E.01179 G2 X-27.243 Y48.997 I-2.986 J.551 E.06272 G1 X-28.449 Y48.342 E.04554 G1 X-28.587 Y48.015 E.01179 G3 X-27.705 Y46.377 I2.986 J.551 E.06272 G1 X-26.499 Y45.722 E.04554 G1 X-26.361 Y45.394 E.01179 G2 X-27.243 Y43.756 I-2.986 J.551 E.06272 G1 X-28.449 Y43.101 E.04554 G1 X-28.587 Y42.773 E.01179 G3 X-27.705 Y41.136 I2.986 J.551 E.06272 G1 X-26.499 Y40.48 E.04554 G1 X-26.361 Y40.153 E.01179 G2 X-27.243 Y38.515 I-2.986 J.551 E.06272 G1 X-28.449 Y37.86 E.04554 G1 X-28.587 Y37.532 E.01179 G3 X-27.705 Y35.894 I2.986 J.551 E.06272 G1 X-26.499 Y35.239 E.04554 G1 X-26.361 Y34.911 E.01179 G2 X-27.243 Y33.274 I-2.986 J.551 E.06272 G1 X-28.449 Y32.618 E.04554 G1 X-28.587 Y32.291 E.01179 G3 X-27.705 Y30.653 I2.986 J.551 E.06272 G1 X-26.499 Y29.998 E.04554 G1 X-26.361 Y29.67 E.01179 G2 X-27.243 Y28.032 I-2.986 J.551 E.06272 G1 X-28.449 Y27.377 E.04554 G1 X-28.587 Y27.049 E.01179 G3 X-27.705 Y25.412 I2.986 J.551 E.06272 G1 X-26.499 Y24.756 E.04554 G1 X-26.361 Y24.429 E.01179 G2 X-27.243 Y22.791 I-2.986 J.551 E.06272 G1 X-28.449 Y22.136 E.04554 G1 X-28.587 Y21.808 E.01179 G3 X-27.705 Y20.17 I2.986 J.551 E.06272 G1 X-26.499 Y19.515 E.04554 G1 X-26.361 Y19.188 E.01179 G2 X-27.243 Y17.55 I-2.986 J.551 E.06272 G1 X-28.449 Y16.894 E.04554 G1 X-28.587 Y16.567 E.01179 G3 X-27.705 Y14.929 I2.986 J.551 E.06272 G1 X-27.173 Y14.64 E.02007 G1 X-25.959 Y14.64 E.04029 G2 X-25.084 Y16.239 I2.971 J-.586 E.0614 G1 X-23.878 Y16.894 E.04554 G1 X-23.74 Y17.222 E.01179 G3 X-24.622 Y18.86 I-2.986 J-.551 E.06272 G1 X-25.829 Y19.515 E.04554 G1 X-25.967 Y19.843 E.01179 G2 X-25.084 Y21.481 I2.986 J-.551 E.06272 G1 X-23.878 Y22.136 E.04554 G1 X-23.74 Y22.463 E.01179 G3 X-24.037 Y23.36 I-2.581 J-.358 E.0315 G1 X-21.524 Y23.36 E.08337 G1 X-22.002 Y22.791 E.02464 G1 X-23.208 Y22.136 E.04554 G1 X-23.346 Y21.808 E.01179 G3 X-22.464 Y20.17 I2.986 J.551 E.06272 G1 X-21.257 Y19.515 E.04554 G1 X-21.12 Y19.188 E.01179 G2 X-22.002 Y17.55 I-2.986 J.551 E.06272 G1 X-23.208 Y16.894 E.04554 G1 X-23.346 Y16.567 E.01179 G3 X-22.464 Y14.929 I2.986 J.551 E.06272 G1 X-21.932 Y14.64 E.02007 G1 X-20.717 Y14.64 E.04029 G2 X-19.843 Y16.239 I2.971 J-.586 E.0614 G1 X-18.637 Y16.894 E.04554 G1 X-18.499 Y17.222 E.01179 G3 X-19.381 Y18.86 I-2.986 J-.551 E.06272 G1 X-20.588 Y19.515 E.04554 G1 X-20.725 Y19.843 E.01179 G2 X-19.843 Y21.481 I2.986 J-.551 E.06272 G1 X-18.637 Y22.136 E.04554 G1 X-18.499 Y22.463 E.01179 G3 X-18.796 Y23.36 I-2.581 J-.358 E.0315 G1 X-16.283 Y23.36 E.08337 G1 X-16.76 Y22.791 E.02464 G1 X-17.967 Y22.136 E.04554 G1 X-18.105 Y21.808 E.01179 G3 X-17.223 Y20.17 I2.986 J.551 E.06272 G1 X-16.016 Y19.515 E.04554 G1 X-15.878 Y19.188 E.01179 G2 X-16.76 Y17.55 I-2.986 J.551 E.06272 G1 X-17.967 Y16.894 E.04554 G1 X-18.105 Y16.567 E.01179 G3 X-17.223 Y14.929 I2.986 J.551 E.06272 G1 X-16.691 Y14.64 E.02007 G1 X-18.319 Y14.64 E.05401 G1 X-25.556 Y23.654 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-25.646 Y23.673 E.00256 G1 X-25.646 Y34.256 E.29321 G1 X-25.627 Y34.346 E.00256 G1 X4.956 Y34.346 E.84732 G1 X5.046 Y34.327 E.00256 G1 X5.046 Y23.744 E.29321 G1 X5.027 Y23.654 E.00256 G1 X-25.516 Y23.654 E.84622 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.94 Y34.226 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-25.94 Y34.64 E.01374 G1 X-24.726 Y34.64 E.04028 G1 X-25.829 Y35.239 E.04163 G2 X-25.899 Y35.894 I.443 J.379 E.02323 G2 X-24.799 Y37.36 I2.206 J-.511 E.0626 G1 X-23.311 Y37.36 E.04936 G3 X-22.464 Y35.894 I2.98 J.744 E.05688 G1 X-21.257 Y35.239 E.04554 G2 X-21.175 Y34.64 I-.397 J-.359 E.02131 G1 X-19.485 Y34.64 E.05607 G1 X-20.588 Y35.239 E.04163 G2 X-20.658 Y35.894 I.443 J.379 E.02323 G2 X-19.557 Y37.36 I2.206 J-.511 E.0626 G1 X-18.069 Y37.36 E.04936 G3 X-17.223 Y35.894 I2.98 J.744 E.05688 G1 X-16.016 Y35.239 E.04554 G2 X-15.934 Y34.64 I-.396 J-.359 E.02131 G1 X-14.243 Y34.64 E.05607 G1 X-15.346 Y35.239 E.04163 G2 X-15.417 Y35.894 I.443 J.379 E.02323 G2 X-14.316 Y37.36 I2.206 J-.511 E.0626 G1 X-12.828 Y37.36 E.04936 G3 X-11.981 Y35.894 I2.98 J.744 E.05688 G1 X-10.775 Y35.239 E.04554 G2 X-10.692 Y34.64 I-.396 J-.359 E.02131 G1 X-9.002 Y34.64 E.05607 G1 X-10.105 Y35.239 E.04163 G2 X-10.176 Y35.894 I.443 J.379 E.02323 G2 X-9.075 Y37.36 I2.206 J-.511 E.0626 G1 X-7.587 Y37.36 E.04936 G3 X-6.74 Y35.894 I2.98 J.744 E.05688 G1 X-5.533 Y35.239 E.04554 G2 X-5.451 Y34.64 I-.397 J-.359 E.02131 G1 X-3.761 Y34.64 E.05607 G1 X-4.864 Y35.239 E.04163 G2 X-4.934 Y35.894 I.443 J.379 E.02323 G2 X-3.833 Y37.36 I2.206 J-.511 E.0626 G1 X-2.345 Y37.36 E.04936 G3 X-1.499 Y35.894 I2.98 J.744 E.05688 G1 X-.292 Y35.239 E.04554 G2 X-.21 Y34.64 I-.397 J-.359 E.02131 G1 X1.481 Y34.64 E.05607 G1 X.378 Y35.239 E.04163 G2 X.307 Y35.894 I.443 J.379 E.02323 G2 X1.408 Y37.36 I2.206 J-.511 E.0626 G1 X2.896 Y37.36 E.04936 G3 X3.743 Y35.894 I2.98 J.744 E.05688 G1 X4.949 Y35.239 E.04554 G2 X5.031 Y34.64 I-.397 J-.359 E.02131 G1 X5.34 Y34.64 E.01024 G1 X5.34 Y33.321 E.04377 G1 X21.883 Y32.64 F30000 G1 F16200 G1 X21.56 Y32.64 E.01072 G1 X21.56 Y31.335 E.0433 G1 X21.272 Y30.653 E.02455 G3 X21.56 Y29.88 I.527 J-.244 E.03042 G1 X21.56 Y26.094 E.1256 G1 X21.272 Y25.412 E.02455 G3 X21.56 Y24.639 I.527 J-.244 E.03042 G1 X21.56 Y20.852 E.1256 G1 X21.272 Y20.17 E.02455 G3 X21.56 Y19.397 I.527 J-.244 E.03042 G1 X21.56 Y17.769 E.05401 G1 X26.846 Y17.279 F30000 G1 F16200 G1 X26.846 Y17.156 E.00408 G1 X27.56 Y17.156 E.02368 G1 X27.56 Y16.365 E.02625 G3 X26.514 Y14.929 I1.168 J-1.95 E.06055 G3 X26.584 Y14.274 I.514 J-.276 E.02323 G1 X27.56 Y13.744 E.03682 G1 X27.56 Y11.124 E.08693 G3 X26.514 Y9.688 I1.168 J-1.95 E.06055 G3 X26.584 Y9.033 I.514 J-.276 E.02323 G1 X27.56 Y8.503 E.03682 G1 X27.56 Y5.882 E.08693 G3 X26.514 Y4.446 I1.168 J-1.95 E.06055 G3 X26.584 Y3.791 I.514 J-.276 E.02323 G3 X27.56 Y3.351 I1.967 J3.055 E.03564 G1 X27.56 Y4.538 E.03939 G1 X24.442 Y3.158 F30000 G1 F16200 G2 X25.992 Y3.607 I1.938 J-3.795 E.05385 G1 X25.914 Y3.791 E.00663 G1 X24.708 Y4.446 E.04554 G2 X23.826 Y6.084 I2.104 J2.189 E.06272 G1 X23.964 Y6.412 E.01179 G1 X25.17 Y7.067 E.04554 G3 X26.052 Y8.705 I-2.104 J2.189 E.06272 G1 X25.914 Y9.033 E.01179 G1 X24.708 Y9.688 E.04554 G2 X23.826 Y11.326 I2.104 J2.189 E.06272 G1 X23.964 Y11.653 E.01179 G1 X25.17 Y12.308 E.04554 G3 X26.052 Y13.946 I-2.104 J2.189 E.06272 G1 X25.914 Y14.274 E.01179 G1 X24.708 Y14.929 E.04554 G2 X23.826 Y16.567 I2.104 J2.189 E.06272 G1 X23.964 Y16.894 E.01179 G1 X24.821 Y17.36 E.03235 G1 X23.403 Y17.36 E.04701 G2 X23.294 Y16.894 I-.395 J-.153 E.01685 G1 X22.087 Y16.239 E.04554 G3 X21.205 Y14.601 I2.104 J-2.189 E.06272 G1 X21.343 Y14.274 E.01179 G1 X22.549 Y13.619 E.04554 G2 X23.432 Y11.981 I-2.104 J-2.189 E.06272 G1 X23.294 Y11.653 E.01179 G1 X22.087 Y10.998 E.04554 G3 X21.205 Y9.36 I2.104 J-2.189 E.06272 G1 X21.343 Y9.033 E.01179 G1 X22.549 Y8.377 E.04554 G2 X23.432 Y6.739 I-2.104 J-2.189 E.06272 G1 X23.294 Y6.412 E.01179 G1 X22.087 Y5.757 E.04554 G3 X21.205 Y4.119 I2.104 J-2.189 E.06272 G1 X21.343 Y3.791 E.01179 G1 X22.549 Y3.136 E.04554 G1 X23.1 Y2.481 E.02838 G1 X23.256 Y2.095 E.01381 G3 X22.686 Y.841 I2.969 J-2.104 E.04597 G1 X22.087 Y.515 E.0226 G3 X21.205 Y-1.123 I2.104 J-2.189 E.06272 G1 X21.343 Y-1.45 E.01179 G1 X22.549 Y-2.105 E.04554 G2 X23.432 Y-3.743 I-2.104 J-2.189 E.06272 G1 X23.294 Y-4.071 E.01179 G1 X22.762 Y-4.36 E.02009 G1 X23.842 Y-4.36 E.03584 G1 X23.964 Y-4.071 E.0104 G1 X25.111 Y-3.448 E.04332 G3 X26.72 Y-3.575 I1.137 J4.13 E.05386 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393961 G1 F12000 G3 X28.611 Y-.863 I-8.109 J1.761 E.0117 ;WIDTH:0.344557 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.307219 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305489 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385479 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409518 G1 X28.535 Y1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.591 Y.981 ;WIPE_END G1 X22.679 Y-3.847 Z2.4 F30000 G1 X21.691 Y-4.654 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X27.763 Y-4.654 E.16824 G1 X27.854 Y-4.635 E.00256 G1 X27.854 Y-3.032 E.04442 G1 X27.821 Y-2.923 E.00316 G1 X27.162 Y-3.172 E.01951 G1 X26.525 Y-3.299 E.01801 G1 X25.875 Y-3.299 E.018 G1 X25.238 Y-3.172 E.018 G1 X24.637 Y-2.923 E.018 G1 X24.097 Y-2.562 E.018 G1 X23.638 Y-2.103 E.018 G1 X23.277 Y-1.563 E.018 G1 X23.028 Y-.962 E.018 G1 X22.901 Y-.325 E.018 G1 X22.901 Y.325 E.018 G1 X23.028 Y.962 E.018 G1 X23.277 Y1.563 E.018 G1 X23.638 Y2.103 E.018 G1 X24.097 Y2.562 E.018 G1 X24.637 Y2.923 E.018 G1 X25.238 Y3.172 E.018 G1 X25.875 Y3.299 E.018 G1 X26.525 Y3.299 E.018 G1 X27.162 Y3.172 E.01801 G1 X27.727 Y2.942 E.01688 G1 X27.821 Y2.923 E.00267 G1 X27.854 Y3.032 E.00316 G1 X27.854 Y17.36 E.39696 G1 X27.838 Y17.435 E.00212 G1 X27.231 Y17.45 E.01684 G1 X27.156 Y17.466 E.00212 G1 X27.122 Y17.654 E.00529 G1 X21.944 Y17.654 E.14344 G1 X21.854 Y17.673 E.00256 G1 X21.854 Y32.256 E.40403 G1 X21.873 Y32.346 E.00256 G1 X27.05 Y32.346 E.14343 G1 X27.125 Y32.362 E.00212 G1 X27.156 Y32.534 E.00486 G1 X27.763 Y32.55 E.01684 G1 X27.854 Y32.568 E.00256 G1 X27.854 Y37.36 E.13275 G1 X27.838 Y37.435 E.00212 G1 X27.231 Y37.45 E.01684 G1 X27.156 Y37.466 E.00212 G1 X27.122 Y37.654 E.00529 G1 X21.944 Y37.654 E.14344 G1 X21.854 Y37.673 E.00256 G1 X21.854 Y52.256 E.40403 G1 X21.873 Y52.346 E.00256 G1 X27.05 Y52.346 E.14343 G1 X27.125 Y52.362 E.00212 G1 X27.156 Y52.534 E.00486 G1 X27.763 Y52.55 E.01684 G1 X27.854 Y52.568 E.00256 G1 X27.854 Y59.563 E.1938 G1 X27.838 Y59.638 E.00212 G1 X26.977 Y59.654 E.02386 G1 X26.888 Y59.632 E.00254 G1 X26.937 Y59.001 E.01753 G1 X26.844 Y58.292 E.01983 G1 X26.571 Y57.631 E.0198 G1 X26.136 Y57.064 E.0198 G1 X25.569 Y56.63 E.0198 G1 X24.908 Y56.356 E.0198 G1 X24.2 Y56.263 E.0198 G1 X23.492 Y56.356 E.0198 G1 X22.831 Y56.63 E.0198 G1 X22.264 Y57.064 E.0198 G1 X21.829 Y57.631 E.0198 G1 X21.556 Y58.292 E.0198 G1 X21.463 Y59.001 E.01983 G1 X21.511 Y59.654 E.01814 G1 X-42.023 Y59.654 E1.76025 G1 X-42.112 Y59.632 E.00254 G1 X-42.063 Y59.001 E.01753 G1 X-42.156 Y58.292 E.01983 G1 X-42.429 Y57.631 E.0198 G1 X-42.864 Y57.064 E.0198 G1 X-43.431 Y56.63 E.0198 G1 X-44.092 Y56.356 E.0198 G1 X-44.8 Y56.263 E.0198 G1 X-45.508 Y56.356 E.0198 G1 X-46.169 Y56.63 E.0198 G1 X-46.736 Y57.064 E.0198 G1 X-47.171 Y57.631 E.0198 G1 X-47.444 Y58.292 E.0198 G1 X-47.537 Y59.001 E.01983 G1 X-47.488 Y59.632 E.01753 G1 X-48.363 Y59.654 E.02425 G1 X-48.454 Y59.635 E.00256 G1 X-48.454 Y52.64 E.1938 G1 X-48.438 Y52.565 E.00212 G1 X-47.831 Y52.55 E.01684 G1 X-47.756 Y52.534 E.00212 G1 X-47.722 Y52.346 E.00529 G1 X-42.544 Y52.346 E.14344 G1 X-42.454 Y52.327 E.00256 G1 X-42.454 Y37.744 E.40403 G1 X-42.473 Y37.654 E.00256 G1 X-47.65 Y37.654 E.14343 G1 X-47.725 Y37.638 E.00212 G1 X-47.756 Y37.466 E.00486 G1 X-48.363 Y37.45 E.01684 G1 X-48.454 Y37.432 E.00256 G1 X-48.454 Y32.64 E.13275 G1 X-48.438 Y32.565 E.00212 G1 X-47.831 Y32.55 E.01684 G1 X-47.756 Y32.534 E.00212 G1 X-47.722 Y32.346 E.00529 G1 X-42.544 Y32.346 E.14344 G1 X-42.454 Y32.327 E.00256 G1 X-42.454 Y19.27 E.36178 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.454 Y17.787 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-42.471 Y17.654 E.00373 G1 X-47.65 Y17.654 E.14346 G1 X-47.725 Y17.638 E.00212 G1 X-47.756 Y17.466 E.00486 G1 X-48.363 Y17.45 E.01684 G1 X-48.454 Y17.432 E.00256 G1 X-48.454 Y3.032 E.39895 G1 X-48.421 Y2.923 E.00316 G1 X-47.762 Y3.172 E.01951 G1 X-47.125 Y3.299 E.01801 G1 X-46.475 Y3.299 E.018 G1 X-45.838 Y3.172 E.018 G1 X-45.237 Y2.923 E.018 G1 X-44.697 Y2.562 E.018 G1 X-44.238 Y2.103 E.018 G1 X-43.877 Y1.563 E.018 G1 X-43.628 Y.962 E.018 G1 X-43.501 Y.325 E.018 G1 X-43.501 Y-.325 E.018 G1 X-43.628 Y-.962 E.018 G1 X-43.877 Y-1.563 E.018 G1 X-44.238 Y-2.103 E.018 G1 X-44.697 Y-2.562 E.018 G1 X-45.237 Y-2.923 E.018 G1 X-45.838 Y-3.172 E.018 G1 X-46.475 Y-3.299 E.018 G1 X-47.125 Y-3.299 E.018 G1 X-47.762 Y-3.172 E.01801 G1 X-48.327 Y-2.942 E.01688 G1 X-48.421 Y-2.923 E.00267 G1 X-48.454 Y-3.032 E.00316 G1 X-48.454 Y-4.563 E.04243 G1 X-48.435 Y-4.654 E.00256 G1 X-40.041 Y-4.654 E.23255 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.454 Y-5.803 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.454 Y-19.805 E.38795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.454 Y-23.303 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.454 Y-24.749 E.04006 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.454 Y-25.698 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.454 Y-29.882 E.11592 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.454 Y-30.82 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.454 Y-35.013 E.11616 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.454 Y-35.953 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.454 Y-36.404 E.01248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.127 Y-37.899 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-38.991 Y-37.91 E.00377 G1 X-38.705 Y-37.456 E.01488 G1 X-38.51 Y-37.239 E.00808 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.285 Y-38.171 F30000 ;TYPE:Gap infill ;WIDTH:0.465138 G1 F12000 G1 X-39.333 Y-38.461 E.0101 ;WIDTH:0.441845 G3 X-39.356 Y-38.68 I3.325 J-.452 E.00717 ;WIDTH:0.401236 G1 X-39.375 Y-38.872 E.00563 ;WIDTH:0.366947 G3 X-39.376 Y-39.682 I8.952 J-.421 E.02139 ;WIDTH:0.399331 G3 X-39.356 Y-39.898 I3.314 J.206 E.0063 ;WIDTH:0.439603 G1 X-39.336 Y-40.092 E.0063 ;WIDTH:0.475862 G3 X-39.285 Y-40.405 I4.614 J.601 E.0112 G1 X-39.454 Y-40.731 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-39.454 Y-52.256 E.31929 G1 X-39.473 Y-52.346 E.00256 G1 X-51.363 Y-52.346 E.32944 G1 X-51.454 Y-52.365 E.00256 G1 X-51.454 Y-59.563 E.19944 G1 X-51.435 Y-59.654 E.00256 G1 X-35.737 Y-59.654 E.43494 G1 X-35.646 Y-59.635 E.00256 G1 X-35.646 Y-52.744 E.19091 G1 X-35.627 Y-52.654 E.00256 G1 X-27.044 Y-52.654 E.2378 G1 X-26.954 Y-52.673 E.00256 G1 X-26.954 Y-59.563 E.19091 G1 X-26.935 Y-59.654 E.00256 G1 X6.263 Y-59.654 E.91979 G1 X6.354 Y-59.635 E.00256 G1 X6.354 Y-52.744 E.19091 G1 X6.373 Y-52.654 E.00256 G1 X14.956 Y-52.654 E.2378 G1 X15.046 Y-52.673 E.00256 G1 X15.046 Y-59.563 E.19091 G1 X15.065 Y-59.654 E.00256 G1 X30.763 Y-59.654 E.43494 G1 X30.854 Y-59.635 E.00256 G1 X30.854 Y-52.437 E.19944 G1 X30.835 Y-52.346 E.00256 G1 X18.944 Y-52.346 E.32944 G1 X18.854 Y-52.327 E.00256 G1 X18.854 Y-7.326 E1.24679 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.904 Y-6.978 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X18.937 Y-5.405 E.05217 G1 X18.652 Y-4.726 E.02444 G2 X18.722 Y-4.071 I.514 J.276 E.02323 G1 X19.929 Y-3.416 E.04554 G3 X20.744 Y-2.105 I-1.609 J1.909 E.05204 G3 X20.673 Y-1.45 I-.514 J.276 E.02323 G1 X19.467 Y-.795 E.04554 G2 X18.652 Y.515 I1.609 J1.909 E.05204 G2 X18.722 Y1.171 I.514 J.276 E.02323 G1 X19.929 Y1.826 E.04554 G3 X20.744 Y3.136 I-1.609 J1.909 E.05204 G3 X20.673 Y3.791 I-.514 J.276 E.02323 G1 X19.467 Y4.446 E.04554 G2 X18.652 Y5.757 I1.609 J1.909 E.05204 G2 X18.722 Y6.412 I.514 J.276 E.02323 G1 X19.929 Y7.067 E.04554 G3 X20.744 Y8.377 I-1.609 J1.909 E.05204 G3 X20.673 Y9.033 I-.514 J.276 E.02323 G1 X19.467 Y9.688 E.04554 G2 X18.652 Y10.998 I1.609 J1.909 E.05204 G2 X18.722 Y11.653 I.514 J.276 E.02323 G1 X19.929 Y12.308 E.04554 G3 X20.744 Y13.619 I-1.609 J1.909 E.05204 G3 X20.673 Y14.274 I-.514 J.276 E.02323 G1 X19.467 Y14.929 E.04554 G2 X18.652 Y16.239 I1.609 J1.909 E.05204 G2 X18.722 Y16.894 I.514 J.276 E.02323 G1 X19.929 Y17.55 E.04554 G3 X20.744 Y18.86 I-1.609 J1.909 E.05204 G3 X20.673 Y19.515 I-.514 J.276 E.02323 G1 X19.467 Y20.17 E.04554 G2 X18.652 Y21.481 I1.609 J1.909 E.05204 G2 X18.722 Y22.136 I.514 J.276 E.02323 G1 X19.929 Y22.791 E.04554 G3 X20.744 Y24.101 I-1.609 J1.909 E.05204 G3 X20.673 Y24.756 I-.514 J.276 E.02323 G1 X19.467 Y25.412 E.04554 G2 X18.652 Y26.722 I1.609 J1.909 E.05204 G2 X18.722 Y27.377 I.514 J.276 E.02323 G1 X19.929 Y28.032 E.04554 G3 X20.744 Y29.343 I-1.609 J1.909 E.05204 G3 X20.673 Y29.998 I-.514 J.276 E.02323 G1 X19.467 Y30.653 E.04554 G2 X18.652 Y31.963 I1.609 J1.909 E.05204 G2 X18.722 Y32.618 I.514 J.276 E.02323 G1 X19.929 Y33.274 E.04554 G3 X20.744 Y34.584 I-1.609 J1.909 E.05204 G3 X20.673 Y35.239 I-.514 J.276 E.02323 G1 X19.467 Y35.894 E.04554 G2 X18.652 Y37.205 I1.609 J1.909 E.05204 G2 X18.722 Y37.86 I.514 J.276 E.02323 G1 X19.929 Y38.515 E.04554 G3 X20.744 Y39.825 I-1.609 J1.909 E.05204 G3 X20.673 Y40.48 I-.514 J.276 E.02323 G1 X19.467 Y41.136 E.04554 G2 X18.652 Y42.446 I1.609 J1.909 E.05204 G2 X18.722 Y43.101 I.514 J.276 E.02323 G1 X19.929 Y43.756 E.04554 G3 X20.744 Y45.066 I-1.609 J1.909 E.05204 G3 X20.673 Y45.722 I-.514 J.276 E.02323 G1 X19.467 Y46.377 E.04554 G2 X18.652 Y47.687 I1.609 J1.909 E.05204 G2 X18.722 Y48.342 I.514 J.276 E.02323 G1 X19.929 Y48.997 E.04554 G3 X20.744 Y50.308 I-1.609 J1.909 E.05204 G3 X20.673 Y50.963 I-.514 J.276 E.02323 G1 X19.467 Y51.618 E.04554 G2 X18.652 Y52.928 I1.609 J1.909 E.05204 G2 X18.722 Y53.584 I.514 J.276 E.02323 G1 X19.929 Y54.239 E.04554 G3 X20.744 Y55.549 I-1.609 J1.909 E.05204 G3 X20.673 Y56.204 I-.514 J.276 E.02323 G1 X19.467 Y56.859 E.04554 G2 X18.652 Y58.17 I1.609 J1.909 E.05204 G2 X18.722 Y58.825 I.514 J.276 E.02323 G1 X19.707 Y59.36 E.03718 G1 X18.148 Y59.36 E.05173 G2 X18.053 Y58.825 I-.439 J-.198 E.01915 G1 X16.846 Y58.17 E.04554 G3 X16.031 Y56.859 I1.609 J-1.909 E.05204 G3 X16.102 Y56.204 I.514 J-.276 E.02323 G1 X17.308 Y55.549 E.04554 G2 X18.123 Y54.239 I-1.609 J-1.909 E.05204 G2 X18.053 Y53.584 I-.514 J-.276 E.02323 G1 X16.846 Y52.928 E.04554 G3 X16.031 Y51.618 I1.609 J-1.909 E.05204 G3 X16.102 Y50.963 I.514 J-.276 E.02323 G1 X17.308 Y50.308 E.04554 G2 X18.123 Y48.997 I-1.609 J-1.909 E.05204 G2 X18.053 Y48.342 I-.514 J-.276 E.02323 G1 X16.846 Y47.687 E.04554 G3 X16.031 Y46.377 I1.609 J-1.909 E.05204 G3 X16.102 Y45.722 I.514 J-.276 E.02323 G1 X17.308 Y45.066 E.04554 G2 X18.123 Y43.756 I-1.609 J-1.909 E.05204 G2 X18.053 Y43.101 I-.514 J-.276 E.02323 G1 X16.846 Y42.446 E.04554 G3 X16.031 Y41.136 I1.609 J-1.909 E.05204 G3 X16.102 Y40.48 I.514 J-.276 E.02323 G1 X17.308 Y39.825 E.04554 G2 X18.123 Y38.515 I-1.609 J-1.909 E.05204 G2 X18.053 Y37.86 I-.514 J-.276 E.02323 G1 X16.846 Y37.205 E.04554 G3 X16.031 Y35.894 I1.609 J-1.909 E.05204 G3 X16.102 Y35.239 I.514 J-.276 E.02323 G1 X17.308 Y34.584 E.04554 G2 X18.123 Y33.274 I-1.609 J-1.909 E.05204 G2 X18.053 Y32.618 I-.514 J-.276 E.02323 G1 X16.846 Y31.963 E.04554 G3 X16.031 Y30.653 I1.609 J-1.909 E.05204 G3 X16.102 Y29.998 I.514 J-.276 E.02323 G1 X17.308 Y29.343 E.04554 G2 X18.123 Y28.032 I-1.609 J-1.909 E.05204 G2 X18.053 Y27.377 I-.514 J-.276 E.02323 G1 X16.846 Y26.722 E.04554 G3 X16.031 Y25.412 I1.609 J-1.909 E.05204 G3 X16.102 Y24.756 I.514 J-.276 E.02323 G1 X17.308 Y24.101 E.04554 G2 X18.123 Y22.791 I-1.609 J-1.909 E.05204 G2 X18.053 Y22.136 I-.514 J-.276 E.02323 G1 X16.846 Y21.481 E.04554 G3 X16.031 Y20.17 I1.609 J-1.909 E.05204 G3 X16.102 Y19.515 I.514 J-.276 E.02323 G1 X17.308 Y18.86 E.04554 G2 X18.123 Y17.55 I-1.609 J-1.909 E.05204 G2 X18.053 Y16.894 I-.514 J-.276 E.02323 G1 X16.846 Y16.239 E.04554 G3 X16.031 Y14.929 I1.609 J-1.909 E.05204 G3 X16.102 Y14.274 I.514 J-.276 E.02323 G1 X17.308 Y13.619 E.04554 G2 X18.123 Y12.308 I-1.609 J-1.909 E.05204 G2 X18.053 Y11.653 I-.514 J-.276 E.02323 G1 X16.846 Y10.998 E.04554 G3 X16.031 Y9.688 I1.609 J-1.909 E.05204 G3 X16.102 Y9.033 I.514 J-.276 E.02323 G1 X17.308 Y8.377 E.04554 G2 X18.123 Y7.067 I-1.609 J-1.909 E.05204 G2 X18.053 Y6.412 I-.514 J-.276 E.02323 G1 X16.846 Y5.757 E.04554 G3 X16.031 Y4.446 I1.609 J-1.909 E.05204 G3 X16.102 Y3.791 I.514 J-.276 E.02323 G1 X17.308 Y3.136 E.04554 G2 X18.123 Y1.826 I-1.609 J-1.909 E.05204 G2 X18.053 Y1.171 I-.514 J-.276 E.02323 G1 X16.846 Y.515 E.04554 G3 X16.031 Y-.795 I1.609 J-1.909 E.05204 G3 X16.102 Y-1.45 I.514 J-.276 E.02323 G1 X17.308 Y-2.105 E.04554 G2 X18.123 Y-3.416 I-1.609 J-1.909 E.05204 G2 X18.053 Y-4.071 I-.514 J-.276 E.02323 G1 X16.846 Y-4.726 E.04554 G3 X16.031 Y-6.036 I1.609 J-1.909 E.05204 G3 X16.102 Y-6.691 I.514 J-.276 E.02323 G1 X17.308 Y-7.347 E.04554 G2 X18.123 Y-8.657 I-1.609 J-1.909 E.05204 G2 X18.053 Y-9.312 I-.514 J-.276 E.02323 G1 X16.846 Y-9.967 E.04554 G3 X16.031 Y-11.278 I1.609 J-1.909 E.05204 G3 X16.102 Y-11.933 I.514 J-.276 E.02323 G1 X17.308 Y-12.588 E.04554 G2 X18.123 Y-13.898 I-1.609 J-1.909 E.05204 G2 X18.053 Y-14.553 I-.514 J-.276 E.02323 G1 X16.846 Y-15.209 E.04554 G3 X16.031 Y-16.519 I1.609 J-1.909 E.05204 G3 X16.102 Y-17.174 I.514 J-.276 E.02323 G1 X17.308 Y-17.829 E.04554 G2 X18.123 Y-19.14 I-1.609 J-1.909 E.05204 G2 X18.053 Y-19.795 I-.514 J-.276 E.02323 G1 X16.846 Y-20.45 E.04554 G3 X16.031 Y-21.76 I1.609 J-1.909 E.05204 G3 X16.102 Y-22.415 I.514 J-.276 E.02323 G1 X17.308 Y-23.07 E.04554 G2 X18.123 Y-24.381 I-1.609 J-1.909 E.05204 G2 X18.053 Y-25.036 I-.514 J-.276 E.02323 G1 X16.846 Y-25.691 E.04554 G3 X16.031 Y-27.001 I1.609 J-1.909 E.05204 G3 X16.102 Y-27.657 I.514 J-.276 E.02323 G1 X17.308 Y-28.312 E.04554 G2 X18.123 Y-29.622 I-1.609 J-1.909 E.05204 G2 X18.053 Y-30.277 I-.514 J-.276 E.02323 G1 X16.846 Y-30.932 E.04554 G3 X16.031 Y-32.243 I1.609 J-1.909 E.05204 G3 X16.102 Y-32.898 I.514 J-.276 E.02323 G1 X17.308 Y-33.553 E.04554 G2 X18.123 Y-34.863 I-1.609 J-1.909 E.05204 G2 X18.053 Y-35.519 I-.514 J-.276 E.02323 G1 X16.846 Y-36.174 E.04554 G3 X16.031 Y-37.484 I1.609 J-1.909 E.05204 G3 X16.102 Y-38.139 I.514 J-.276 E.02323 G1 X17.308 Y-38.794 E.04554 G2 X18.123 Y-40.105 I-1.609 J-1.909 E.05204 G2 X18.053 Y-40.76 I-.514 J-.276 E.02323 G1 X16.846 Y-41.415 E.04554 G3 X16.031 Y-42.725 I1.609 J-1.909 E.05204 G3 X16.102 Y-43.381 I.514 J-.276 E.02323 G1 X17.308 Y-44.036 E.04554 G2 X18.123 Y-45.346 I-1.609 J-1.909 E.05204 G2 X18.053 Y-46.001 I-.514 J-.276 E.02323 G1 X16.846 Y-46.656 E.04554 G3 X16.031 Y-47.967 I1.609 J-1.909 E.05204 G3 X16.102 Y-48.622 I.514 J-.276 E.02323 G1 X17.308 Y-49.277 E.04554 G2 X18.123 Y-50.587 I-1.609 J-1.909 E.05204 G2 X18.053 Y-51.242 I-.514 J-.276 E.02323 G1 X16.846 Y-51.898 E.04554 G3 X16.031 Y-53.208 I1.609 J-1.909 E.05204 G3 X16.102 Y-53.863 I.514 J-.276 E.02323 G1 X17.308 Y-54.518 E.04554 G2 X18.123 Y-55.829 I-1.609 J-1.909 E.05204 G2 X18.053 Y-56.484 I-.514 J-.276 E.02323 G1 X16.846 Y-57.139 E.04554 G3 X16.031 Y-58.449 I1.609 J-1.909 E.05204 G3 X16.102 Y-59.104 I.514 J-.276 E.02323 G1 X16.572 Y-59.36 E.01775 G1 X15.539 Y-59.36 E.03425 G3 X15.34 Y-59.055 I-.29 J.028 E.01305 G1 X15.34 Y-54.92 E.13716 G1 X15.503 Y-54.518 E.01436 G3 X15.432 Y-53.863 I-.514 J.276 E.02323 G1 X15.34 Y-53.813 E.00346 G1 X15.34 Y-52.36 E.04822 G1 X15.165 Y-52.36 E.0058 G1 X18.56 Y-51.442 F30000 G1 F16200 G1 X18.56 Y-52.64 E.03975 G1 X18.99 Y-52.64 E.01427 G1 X19.467 Y-53.208 E.02459 G1 X20.673 Y-53.863 E.04554 G1 X20.811 Y-54.191 E.01179 G2 X19.929 Y-55.829 I-2.986 J.551 E.06272 G1 X18.722 Y-56.484 E.04554 G1 X18.585 Y-56.811 E.01179 G3 X19.467 Y-58.449 I2.986 J.551 E.06272 G1 X20.673 Y-59.104 E.04554 G1 X20.781 Y-59.36 E.00919 G1 X21.813 Y-59.36 E.03425 G1 X21.343 Y-59.104 E.01775 G1 X21.205 Y-58.777 E.01179 G2 X22.087 Y-57.139 I2.986 J-.551 E.06272 G1 X23.294 Y-56.484 E.04554 G1 X23.432 Y-56.156 E.01179 G3 X22.549 Y-54.518 I-2.986 J-.551 E.06272 G1 X21.343 Y-53.863 E.04554 G1 X21.205 Y-53.536 E.01179 G2 X21.502 Y-52.64 I2.578 J-.357 E.03146 G1 X24.231 Y-52.64 E.09054 G1 X24.708 Y-53.208 E.02459 G1 X25.914 Y-53.863 E.04554 G1 X26.052 Y-54.191 E.01179 G2 X25.17 Y-55.829 I-2.986 J.551 E.06272 G1 X23.964 Y-56.484 E.04554 G1 X23.826 Y-56.811 E.01179 G3 X24.708 Y-58.449 I2.986 J.551 E.06272 G1 X25.914 Y-59.104 E.04554 G1 X26.022 Y-59.36 E.00919 G1 X27.054 Y-59.36 E.03425 G1 X26.584 Y-59.104 E.01775 G1 X26.446 Y-58.777 E.01179 G2 X27.329 Y-57.139 I2.986 J-.551 E.06272 G1 X28.535 Y-56.484 E.04554 G1 X28.673 Y-56.156 E.01179 G3 X27.791 Y-54.518 I-2.986 J-.551 E.06272 G1 X26.584 Y-53.863 E.04554 G1 X26.446 Y-53.536 E.01179 G2 X26.743 Y-52.64 I2.578 J-.357 E.03146 G1 X29.473 Y-52.64 E.09054 G3 X30.56 Y-53.54 I1.686 J.932 E.04792 G1 X30.56 Y-55.652 E.07007 G1 X30.411 Y-55.829 E.00765 G1 X29.205 Y-56.484 E.04554 G1 X29.067 Y-56.811 E.01179 G3 X29.949 Y-58.449 I2.986 J.551 E.06272 G1 X30.56 Y-58.781 E.02305 G1 X30.56 Y-59.36 E.01921 G1 X29.51 Y-59.36 E.03481 G1 X14.549 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X6.851 Y-60 E.19 G1 X6.06 Y-59.129 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X6.06 Y-57.5 E.05401 G3 X5.548 Y-58.449 I1.204 J-1.261 E.03635 G3 X5.619 Y-59.104 I.514 J-.276 E.02323 G1 X6.06 Y-59.36 E.0169 G1 X5.057 Y-59.36 E.03328 G1 X4.949 Y-59.104 E.00919 G1 X3.743 Y-58.449 E.04554 G2 X2.928 Y-57.139 I1.609 J1.909 E.05204 G2 X2.998 Y-56.484 I.514 J.276 E.02323 G1 X4.205 Y-55.829 E.04554 G3 X5.02 Y-54.518 I-1.609 J1.909 E.05204 G3 X4.949 Y-53.863 I-.514 J.276 E.02323 G1 X3.743 Y-53.208 E.04554 G2 X2.928 Y-51.898 I1.609 J1.909 E.05204 G2 X2.998 Y-51.242 I.514 J.276 E.02323 G1 X4.205 Y-50.587 E.04554 G3 X5.02 Y-49.277 I-1.609 J1.909 E.05204 G3 X4.949 Y-48.622 I-.514 J.276 E.02323 G1 X3.743 Y-47.967 E.04554 G2 X2.928 Y-46.656 I1.609 J1.909 E.05204 G2 X2.998 Y-46.001 I.514 J.276 E.02323 G1 X4.205 Y-45.346 E.04554 G3 X5.02 Y-44.036 I-1.609 J1.909 E.05204 G3 X4.949 Y-43.381 I-.514 J.276 E.02323 G1 X3.743 Y-42.725 E.04554 G2 X2.928 Y-41.415 I1.609 J1.909 E.05204 G2 X2.998 Y-40.76 I.514 J.276 E.02323 G1 X4.205 Y-40.105 E.04554 G3 X5.02 Y-38.794 I-1.609 J1.909 E.05204 G3 X4.949 Y-38.139 I-.514 J.276 E.02323 G1 X3.743 Y-37.484 E.04554 G2 X2.928 Y-36.174 I1.609 J1.909 E.05204 G2 X2.998 Y-35.519 I.514 J.276 E.02323 G1 X4.205 Y-34.863 E.04554 G3 X5.02 Y-33.553 I-1.609 J1.909 E.05204 G3 X4.949 Y-32.898 I-.514 J.276 E.02323 G1 X3.743 Y-32.243 E.04554 G2 X2.928 Y-30.932 I1.609 J1.909 E.05204 G2 X2.998 Y-30.277 I.514 J.276 E.02323 G1 X4.205 Y-29.622 E.04554 G3 X5.02 Y-28.312 I-1.609 J1.909 E.05204 G3 X4.949 Y-27.657 I-.514 J.276 E.02323 G1 X3.743 Y-27.001 E.04554 G2 X2.928 Y-25.691 I1.609 J1.909 E.05204 G2 X2.998 Y-25.036 I.514 J.276 E.02323 G1 X4.205 Y-24.381 E.04554 G3 X5.02 Y-23.07 I-1.609 J1.909 E.05204 G3 X4.949 Y-22.415 I-.514 J.276 E.02323 G1 X3.743 Y-21.76 E.04554 G2 X2.928 Y-20.45 I1.609 J1.909 E.05204 G2 X2.998 Y-19.795 I.514 J.276 E.02323 G1 X4.205 Y-19.14 E.04554 G3 X5.02 Y-17.829 I-1.609 J1.909 E.05204 G3 X4.949 Y-17.174 I-.514 J.276 E.02323 G1 X3.743 Y-16.519 E.04554 G2 X2.928 Y-15.209 I1.609 J1.909 E.05204 G2 X2.998 Y-14.553 I.514 J.276 E.02323 G1 X4.205 Y-13.898 E.04554 G3 X5.02 Y-12.588 I-1.609 J1.909 E.05204 G3 X4.949 Y-11.933 I-.514 J.276 E.02323 G1 X3.743 Y-11.278 E.04554 G2 X2.928 Y-9.967 I1.609 J1.909 E.05204 G2 X2.998 Y-9.312 I.514 J.276 E.02323 G1 X4.205 Y-8.657 E.04554 G3 X5.02 Y-7.347 I-1.609 J1.909 E.05204 G3 X4.949 Y-6.691 I-.514 J.276 E.02323 G1 X3.743 Y-6.036 E.04554 G2 X2.928 Y-4.726 I1.609 J1.909 E.05204 G2 X2.998 Y-4.071 I.514 J.276 E.02323 G1 X4.205 Y-3.416 E.04554 G1 X4.804 Y-2.64 E.0325 G1 X7.275 Y-2.64 E.08197 G1 X7.641 Y-3.416 E.02844 G2 X7.57 Y-4.071 I-.514 J-.276 E.02323 G1 X6.363 Y-4.726 E.04554 G3 X5.548 Y-6.036 I1.609 J-1.909 E.05204 G3 X5.619 Y-6.691 I.514 J-.276 E.02323 G1 X6.826 Y-7.347 E.04554 G2 X7.641 Y-8.657 I-1.609 J-1.909 E.05204 G2 X7.57 Y-9.312 I-.514 J-.276 E.02323 G1 X6.363 Y-9.967 E.04554 G3 X5.548 Y-11.278 I1.609 J-1.909 E.05204 G3 X5.619 Y-11.933 I.514 J-.276 E.02323 G1 X6.826 Y-12.588 E.04554 G2 X7.641 Y-13.898 I-1.609 J-1.909 E.05204 G2 X7.57 Y-14.553 I-.514 J-.276 E.02323 G1 X6.363 Y-15.209 E.04554 G3 X5.548 Y-16.519 I1.609 J-1.909 E.05204 G3 X5.619 Y-17.174 I.514 J-.276 E.02323 G1 X6.826 Y-17.829 E.04554 G2 X7.641 Y-19.14 I-1.609 J-1.909 E.05204 G2 X7.57 Y-19.795 I-.514 J-.276 E.02323 G1 X6.363 Y-20.45 E.04554 G3 X5.548 Y-21.76 I1.609 J-1.909 E.05204 G3 X5.619 Y-22.415 I.514 J-.276 E.02323 G1 X6.826 Y-23.07 E.04554 G2 X7.641 Y-24.381 I-1.609 J-1.909 E.05204 G2 X7.57 Y-25.036 I-.514 J-.276 E.02323 G1 X6.363 Y-25.691 E.04554 G3 X5.548 Y-27.001 I1.609 J-1.909 E.05204 G3 X5.619 Y-27.657 I.514 J-.276 E.02323 G1 X6.826 Y-28.312 E.04554 G2 X7.641 Y-29.622 I-1.609 J-1.909 E.05204 G2 X7.57 Y-30.277 I-.514 J-.276 E.02323 G1 X6.363 Y-30.932 E.04554 G3 X5.548 Y-32.243 I1.609 J-1.909 E.05204 G3 X5.619 Y-32.898 I.514 J-.276 E.02323 G1 X6.826 Y-33.553 E.04554 G2 X7.641 Y-34.863 I-1.609 J-1.909 E.05204 G2 X7.57 Y-35.519 I-.514 J-.276 E.02323 G1 X6.363 Y-36.174 E.04554 G3 X5.548 Y-37.484 I1.609 J-1.909 E.05204 G3 X5.619 Y-38.139 I.514 J-.276 E.02323 G1 X6.826 Y-38.794 E.04554 G2 X7.641 Y-40.105 I-1.609 J-1.909 E.05204 G2 X7.57 Y-40.76 I-.514 J-.276 E.02323 G1 X6.363 Y-41.415 E.04554 G3 X5.548 Y-42.725 I1.609 J-1.909 E.05204 G3 X5.619 Y-43.381 I.514 J-.276 E.02323 G1 X6.826 Y-44.036 E.04554 G2 X7.641 Y-45.346 I-1.609 J-1.909 E.05204 G2 X7.57 Y-46.001 I-.514 J-.276 E.02323 G1 X6.363 Y-46.656 E.04554 G3 X5.548 Y-47.967 I1.609 J-1.909 E.05204 G3 X5.619 Y-48.622 I.514 J-.276 E.02323 G1 X6.826 Y-49.277 E.04554 G2 X7.641 Y-50.587 I-1.609 J-1.909 E.05204 G2 X7.57 Y-51.242 I-.514 J-.276 E.02323 G1 X6.363 Y-51.898 E.04554 G3 X5.548 Y-53.208 I1.609 J-1.909 E.05204 G3 X5.619 Y-53.863 I.514 J-.276 E.02323 G1 X6.06 Y-54.102 E.01664 G1 X6.06 Y-55.731 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X6.06 Y-54.102 G1 X5.733 Y-53.925 ;WIPE_END G1 X9.984 Y-52.36 Z2.4 F30000 G1 Z2 G1 E.8 F1800 G1 F16200 G1 X8.356 Y-52.36 E.05401 G1 X8.169 Y-51.898 E.01654 G2 X8.24 Y-51.242 I.514 J.276 E.02323 G1 X9.446 Y-50.587 E.04554 G3 X10.261 Y-49.277 I-1.609 J1.909 E.05204 G3 X10.191 Y-48.622 I-.514 J.276 E.02323 G1 X8.984 Y-47.967 E.04554 G2 X8.169 Y-46.656 I1.609 J1.909 E.05204 G2 X8.24 Y-46.001 I.514 J.276 E.02323 G1 X9.446 Y-45.346 E.04554 G3 X10.261 Y-44.036 I-1.609 J1.909 E.05204 G3 X10.191 Y-43.381 I-.514 J.276 E.02323 G1 X8.984 Y-42.725 E.04554 G2 X8.169 Y-41.415 I1.609 J1.909 E.05204 G2 X8.24 Y-40.76 I.514 J.276 E.02323 G1 X9.446 Y-40.105 E.04554 G3 X10.261 Y-38.794 I-1.609 J1.909 E.05204 G3 X10.191 Y-38.139 I-.514 J.276 E.02323 G1 X8.984 Y-37.484 E.04554 G2 X8.169 Y-36.174 I1.609 J1.909 E.05204 G2 X8.24 Y-35.519 I.514 J.276 E.02323 G1 X9.446 Y-34.863 E.04554 G3 X10.261 Y-33.553 I-1.609 J1.909 E.05204 G3 X10.191 Y-32.898 I-.514 J.276 E.02323 G1 X8.984 Y-32.243 E.04554 G2 X8.169 Y-30.932 I1.609 J1.909 E.05204 G2 X8.24 Y-30.277 I.514 J.276 E.02323 G1 X9.446 Y-29.622 E.04554 G3 X10.261 Y-28.312 I-1.609 J1.909 E.05204 G3 X10.191 Y-27.657 I-.514 J.276 E.02323 G1 X8.984 Y-27.001 E.04554 G2 X8.169 Y-25.691 I1.609 J1.909 E.05204 G2 X8.24 Y-25.036 I.514 J.276 E.02323 G1 X9.446 Y-24.381 E.04554 G3 X10.261 Y-23.07 I-1.609 J1.909 E.05204 G3 X10.191 Y-22.415 I-.514 J.276 E.02323 G1 X8.984 Y-21.76 E.04554 G2 X8.169 Y-20.45 I1.609 J1.909 E.05204 G2 X8.24 Y-19.795 I.514 J.276 E.02323 G1 X9.446 Y-19.14 E.04554 G3 X10.261 Y-17.829 I-1.609 J1.909 E.05204 G3 X10.191 Y-17.174 I-.514 J.276 E.02323 G1 X8.984 Y-16.519 E.04554 G2 X8.169 Y-15.209 I1.609 J1.909 E.05204 G2 X8.24 Y-14.553 I.514 J.276 E.02323 G1 X9.446 Y-13.898 E.04554 G3 X10.261 Y-12.588 I-1.609 J1.909 E.05204 G3 X10.191 Y-11.933 I-.514 J.276 E.02323 G1 X8.984 Y-11.278 E.04554 G2 X8.169 Y-9.967 I1.609 J1.909 E.05204 G2 X8.24 Y-9.312 I.514 J.276 E.02323 G1 X9.446 Y-8.657 E.04554 G3 X10.261 Y-7.347 I-1.609 J1.909 E.05204 G3 X10.191 Y-6.691 I-.514 J.276 E.02323 G1 X8.984 Y-6.036 E.04554 G2 X8.169 Y-4.726 I1.609 J1.909 E.05204 G2 X8.24 Y-4.071 I.514 J.276 E.02323 G1 X9.446 Y-3.416 E.04554 G3 X10.261 Y-2.105 I-1.609 J1.909 E.05204 G3 X10.191 Y-1.45 I-.514 J.276 E.02323 G1 X9.14 Y-.88 E.03965 G1 X9.14 Y1.66 E.08423 G1 X9.446 Y1.826 E.01155 G1 X9.903 Y2.37 E.02356 G3 X11.852 Y3.248 I-.359 J3.399 E.07213 G2 X12.882 Y1.826 I-1.168 J-1.929 E.05982 G2 X12.811 Y1.171 I-.514 J-.276 E.02323 G1 X11.605 Y.515 E.04554 G3 X10.79 Y-.795 I1.609 J-1.909 E.05204 G3 X10.86 Y-1.45 I.514 J-.276 E.02323 G1 X12.067 Y-2.105 E.04554 G2 X12.882 Y-3.416 I-1.609 J-1.909 E.05204 G2 X12.811 Y-4.071 I-.514 J-.276 E.02323 G1 X11.605 Y-4.726 E.04554 G3 X10.79 Y-6.036 I1.609 J-1.909 E.05204 G3 X10.86 Y-6.691 I.514 J-.276 E.02323 G1 X12.067 Y-7.347 E.04554 G2 X12.882 Y-8.657 I-1.609 J-1.909 E.05204 G2 X12.811 Y-9.312 I-.514 J-.276 E.02323 G1 X11.605 Y-9.967 E.04554 G3 X10.79 Y-11.278 I1.609 J-1.909 E.05204 G3 X10.86 Y-11.933 I.514 J-.276 E.02323 G1 X12.067 Y-12.588 E.04554 G2 X12.882 Y-13.898 I-1.609 J-1.909 E.05204 G2 X12.811 Y-14.553 I-.514 J-.276 E.02323 G1 X11.605 Y-15.209 E.04554 G3 X10.79 Y-16.519 I1.609 J-1.909 E.05204 G3 X10.86 Y-17.174 I.514 J-.276 E.02323 G1 X12.067 Y-17.829 E.04554 G2 X12.882 Y-19.14 I-1.609 J-1.909 E.05204 G2 X12.811 Y-19.795 I-.514 J-.276 E.02323 G1 X11.605 Y-20.45 E.04554 G3 X10.79 Y-21.76 I1.609 J-1.909 E.05204 G3 X10.86 Y-22.415 I.514 J-.276 E.02323 G1 X12.067 Y-23.07 E.04554 G2 X12.882 Y-24.381 I-1.609 J-1.909 E.05204 G2 X12.811 Y-25.036 I-.514 J-.276 E.02323 G1 X11.605 Y-25.691 E.04554 G3 X10.79 Y-27.001 I1.609 J-1.909 E.05204 G3 X10.86 Y-27.657 I.514 J-.276 E.02323 G1 X12.067 Y-28.312 E.04554 G2 X12.882 Y-29.622 I-1.609 J-1.909 E.05204 G2 X12.811 Y-30.277 I-.514 J-.276 E.02323 G1 X11.605 Y-30.932 E.04554 G3 X10.79 Y-32.243 I1.609 J-1.909 E.05204 G3 X10.86 Y-32.898 I.514 J-.276 E.02323 G1 X12.067 Y-33.553 E.04554 G2 X12.882 Y-34.863 I-1.609 J-1.909 E.05204 G2 X12.811 Y-35.519 I-.514 J-.276 E.02323 G1 X11.605 Y-36.174 E.04554 G3 X10.79 Y-37.484 I1.609 J-1.909 E.05204 G3 X10.86 Y-38.139 I.514 J-.276 E.02323 G1 X12.067 Y-38.794 E.04554 G2 X12.882 Y-40.105 I-1.609 J-1.909 E.05204 G2 X12.811 Y-40.76 I-.514 J-.276 E.02323 G1 X11.605 Y-41.415 E.04554 G3 X10.79 Y-42.725 I1.609 J-1.909 E.05204 G3 X10.86 Y-43.381 I.514 J-.276 E.02323 G1 X12.067 Y-44.036 E.04554 G2 X12.882 Y-45.346 I-1.609 J-1.909 E.05204 G2 X12.811 Y-46.001 I-.514 J-.276 E.02323 G1 X11.605 Y-46.656 E.04554 G3 X10.79 Y-47.967 I1.609 J-1.909 E.05204 G3 X10.86 Y-48.622 I.514 J-.276 E.02323 G1 X12.067 Y-49.277 E.04554 G2 X12.882 Y-50.587 I-1.609 J-1.909 E.05204 G2 X12.811 Y-51.242 I-.514 J-.276 E.02323 G1 X11.605 Y-51.898 E.04554 G1 X11.217 Y-52.36 E.02002 G1 X13.597 Y-52.36 E.07897 G1 X13.41 Y-51.898 E.01654 G2 X13.481 Y-51.242 I.514 J.276 E.02323 G1 X14.688 Y-50.587 E.04554 G3 X15.503 Y-49.277 I-1.609 J1.909 E.05204 G3 X15.432 Y-48.622 I-.514 J.276 E.02323 G1 X14.225 Y-47.967 E.04554 G2 X13.41 Y-46.656 I1.609 J1.909 E.05204 G2 X13.481 Y-46.001 I.514 J.276 E.02323 G1 X14.688 Y-45.346 E.04554 G3 X15.503 Y-44.036 I-1.609 J1.909 E.05204 G3 X15.432 Y-43.381 I-.514 J.276 E.02323 G1 X14.225 Y-42.725 E.04554 G2 X13.41 Y-41.415 I1.609 J1.909 E.05204 G2 X13.481 Y-40.76 I.514 J.276 E.02323 G1 X14.688 Y-40.105 E.04554 G3 X15.503 Y-38.794 I-1.609 J1.909 E.05204 G3 X15.432 Y-38.139 I-.514 J.276 E.02323 G1 X14.225 Y-37.484 E.04554 G2 X13.41 Y-36.174 I1.609 J1.909 E.05204 G2 X13.481 Y-35.519 I.514 J.276 E.02323 G1 X14.688 Y-34.863 E.04554 G3 X15.503 Y-33.553 I-1.609 J1.909 E.05204 G3 X15.432 Y-32.898 I-.514 J.276 E.02323 G1 X14.225 Y-32.243 E.04554 G2 X13.41 Y-30.932 I1.609 J1.909 E.05204 G2 X13.481 Y-30.277 I.514 J.276 E.02323 G1 X14.688 Y-29.622 E.04554 G3 X15.503 Y-28.312 I-1.609 J1.909 E.05204 G3 X15.432 Y-27.657 I-.514 J.276 E.02323 G1 X14.225 Y-27.001 E.04554 G2 X13.41 Y-25.691 I1.609 J1.909 E.05204 G2 X13.481 Y-25.036 I.514 J.276 E.02323 G1 X14.688 Y-24.381 E.04554 G3 X15.503 Y-23.07 I-1.609 J1.909 E.05204 G3 X15.432 Y-22.415 I-.514 J.276 E.02323 G1 X14.225 Y-21.76 E.04554 G2 X13.41 Y-20.45 I1.609 J1.909 E.05204 G2 X13.481 Y-19.795 I.514 J.276 E.02323 G1 X14.688 Y-19.14 E.04554 G3 X15.503 Y-17.829 I-1.609 J1.909 E.05204 G3 X15.432 Y-17.174 I-.514 J.276 E.02323 G1 X14.225 Y-16.519 E.04554 G2 X13.41 Y-15.209 I1.609 J1.909 E.05204 G2 X13.481 Y-14.553 I.514 J.276 E.02323 G1 X14.688 Y-13.898 E.04554 G3 X15.503 Y-12.588 I-1.609 J1.909 E.05204 G3 X15.432 Y-11.933 I-.514 J.276 E.02323 G1 X14.225 Y-11.278 E.04554 G2 X13.41 Y-9.967 I1.609 J1.909 E.05204 G2 X13.481 Y-9.312 I.514 J.276 E.02323 G1 X14.688 Y-8.657 E.04554 G3 X15.503 Y-7.347 I-1.609 J1.909 E.05204 G3 X15.432 Y-6.691 I-.514 J.276 E.02323 G1 X14.225 Y-6.036 E.04554 G2 X13.41 Y-4.726 I1.609 J1.909 E.05204 G2 X13.481 Y-4.071 I.514 J.276 E.02323 G1 X14.688 Y-3.416 E.04554 G3 X15.503 Y-2.105 I-1.609 J1.909 E.05204 G3 X15.432 Y-1.45 I-.514 J.276 E.02323 G1 X14.225 Y-.795 E.04554 G2 X13.41 Y.515 I1.609 J1.909 E.05204 G2 X13.481 Y1.171 I.514 J.276 E.02323 G1 X14.688 Y1.826 E.04554 G3 X15.503 Y3.136 I-1.609 J1.909 E.05204 G3 X15.432 Y3.791 I-.514 J.276 E.02323 G1 X14.225 Y4.446 E.04554 G2 X13.41 Y5.757 I1.609 J1.909 E.05204 G2 X13.481 Y6.412 I.514 J.276 E.02323 G1 X14.688 Y7.067 E.04554 G3 X15.503 Y8.377 I-1.609 J1.909 E.05204 G3 X15.432 Y9.033 I-.514 J.276 E.02323 G1 X14.225 Y9.688 E.04554 G2 X13.41 Y10.998 I1.609 J1.909 E.05204 G2 X13.481 Y11.653 I.514 J.276 E.02323 G1 X14.688 Y12.308 E.04554 G3 X15.503 Y13.619 I-1.609 J1.909 E.05204 G3 X15.432 Y14.274 I-.514 J.276 E.02323 G1 X14.225 Y14.929 E.04554 G2 X13.41 Y16.239 I1.609 J1.909 E.05204 G2 X13.481 Y16.894 I.514 J.276 E.02323 G1 X14.688 Y17.55 E.04554 G3 X15.503 Y18.86 I-1.609 J1.909 E.05204 G3 X15.432 Y19.515 I-.514 J.276 E.02323 G1 X14.225 Y20.17 E.04554 G2 X13.41 Y21.481 I1.609 J1.909 E.05204 G2 X13.481 Y22.136 I.514 J.276 E.02323 G1 X14.688 Y22.791 E.04554 G3 X15.503 Y24.101 I-1.609 J1.909 E.05204 G3 X15.432 Y24.756 I-.514 J.276 E.02323 G1 X14.225 Y25.412 E.04554 G2 X13.41 Y26.722 I1.609 J1.909 E.05204 G2 X13.481 Y27.377 I.514 J.276 E.02323 G1 X14.688 Y28.032 E.04554 G3 X15.503 Y29.343 I-1.609 J1.909 E.05204 G3 X15.432 Y29.998 I-.514 J.276 E.02323 G1 X14.225 Y30.653 E.04554 G2 X13.41 Y31.963 I1.609 J1.909 E.05204 G2 X13.481 Y32.618 I.514 J.276 E.02323 G1 X14.688 Y33.274 E.04554 G3 X15.503 Y34.584 I-1.609 J1.909 E.05204 G3 X15.432 Y35.239 I-.514 J.276 E.02323 G1 X14.225 Y35.894 E.04554 G2 X13.41 Y37.205 I1.609 J1.909 E.05204 G2 X13.481 Y37.86 I.514 J.276 E.02323 G1 X14.688 Y38.515 E.04554 G3 X15.503 Y39.825 I-1.609 J1.909 E.05204 G3 X15.432 Y40.48 I-.514 J.276 E.02323 G1 X14.225 Y41.136 E.04554 G2 X13.41 Y42.446 I1.609 J1.909 E.05204 G2 X13.481 Y43.101 I.514 J.276 E.02323 G1 X14.688 Y43.756 E.04554 G3 X15.503 Y45.066 I-1.609 J1.909 E.05204 G3 X15.432 Y45.722 I-.514 J.276 E.02323 G1 X14.225 Y46.377 E.04554 G2 X13.41 Y47.687 I1.609 J1.909 E.05204 G2 X13.481 Y48.342 I.514 J.276 E.02323 G1 X14.688 Y48.997 E.04554 G3 X15.503 Y50.308 I-1.609 J1.909 E.05204 G3 X15.432 Y50.963 I-.514 J.276 E.02323 G1 X14.225 Y51.618 E.04554 G2 X13.41 Y52.928 I1.609 J1.909 E.05204 G2 X13.481 Y53.584 I.514 J.276 E.02323 G1 X14.688 Y54.239 E.04554 G3 X15.503 Y55.549 I-1.609 J1.909 E.05204 G3 X15.432 Y56.204 I-.514 J.276 E.02323 G1 X14.225 Y56.859 E.04554 G2 X13.41 Y58.17 I1.609 J1.909 E.05204 G2 X13.481 Y58.825 I.514 J.276 E.02323 G1 X14.466 Y59.36 E.03718 G1 X12.906 Y59.36 E.05173 G2 X12.811 Y58.825 I-.439 J-.198 E.01915 G1 X11.605 Y58.17 E.04554 G3 X10.79 Y56.859 I1.609 J-1.909 E.05204 G3 X10.86 Y56.204 I.514 J-.276 E.02323 G1 X12.067 Y55.549 E.04554 G2 X12.882 Y54.239 I-1.609 J-1.909 E.05204 G2 X12.811 Y53.584 I-.514 J-.276 E.02323 G1 X11.605 Y52.928 E.04554 G3 X10.79 Y51.618 I1.609 J-1.909 E.05204 G3 X10.86 Y50.963 I.514 J-.276 E.02323 G1 X12.067 Y50.308 E.04554 G2 X12.882 Y48.997 I-1.609 J-1.909 E.05204 G2 X12.811 Y48.342 I-.514 J-.276 E.02323 G1 X11.605 Y47.687 E.04554 G3 X10.79 Y46.377 I1.609 J-1.909 E.05204 G3 X10.86 Y45.722 I.514 J-.276 E.02323 G1 X12.067 Y45.066 E.04554 G2 X12.882 Y43.756 I-1.609 J-1.909 E.05204 G2 X12.811 Y43.101 I-.514 J-.276 E.02323 G1 X11.605 Y42.446 E.04554 G3 X10.79 Y41.136 I1.609 J-1.909 E.05204 G3 X10.86 Y40.48 I.514 J-.276 E.02323 G1 X12.067 Y39.825 E.04554 G2 X12.882 Y38.515 I-1.609 J-1.909 E.05204 G2 X12.811 Y37.86 I-.514 J-.276 E.02323 G1 X11.605 Y37.205 E.04554 G3 X10.79 Y35.894 I1.609 J-1.909 E.05204 G3 X10.86 Y35.239 I.514 J-.276 E.02323 G1 X12.067 Y34.584 E.04554 G2 X12.882 Y33.274 I-1.609 J-1.909 E.05204 G2 X12.811 Y32.618 I-.514 J-.276 E.02323 G1 X11.605 Y31.963 E.04554 G3 X10.79 Y30.653 I1.609 J-1.909 E.05204 G3 X10.86 Y29.998 I.514 J-.276 E.02323 G1 X12.067 Y29.343 E.04554 G2 X12.882 Y28.032 I-1.609 J-1.909 E.05204 G2 X12.811 Y27.377 I-.514 J-.276 E.02323 G1 X11.605 Y26.722 E.04554 G3 X10.79 Y25.412 I1.609 J-1.909 E.05204 G3 X10.86 Y24.756 I.514 J-.276 E.02323 G1 X12.067 Y24.101 E.04554 G2 X12.882 Y22.791 I-1.609 J-1.909 E.05204 G2 X12.811 Y22.136 I-.514 J-.276 E.02323 G1 X11.605 Y21.481 E.04554 G3 X10.79 Y20.17 I1.609 J-1.909 E.05204 G3 X10.86 Y19.515 I.514 J-.276 E.02323 G1 X12.067 Y18.86 E.04554 G2 X12.882 Y17.55 I-1.609 J-1.909 E.05204 G2 X12.811 Y16.894 I-.514 J-.276 E.02323 G1 X11.605 Y16.239 E.04554 G3 X10.79 Y14.929 I1.609 J-1.909 E.05204 G3 X10.86 Y14.274 I.514 J-.276 E.02323 G1 X12.067 Y13.619 E.04554 G2 X12.882 Y12.308 I-1.609 J-1.909 E.05204 G2 X12.811 Y11.653 I-.514 J-.276 E.02323 G1 X11.605 Y10.998 E.04554 G3 X10.79 Y9.688 I1.609 J-1.909 E.05204 G3 X10.86 Y9.033 I.514 J-.276 E.02323 G1 X12.067 Y8.377 E.04554 G2 X12.882 Y7.067 I-1.609 J-1.909 E.05204 G2 X12.602 Y6.298 I-.526 J-.244 E.03011 G3 X10.263 Y8.385 I-2.905 J-.902 E.10925 G3 X10.191 Y9.033 I-.509 J.271 E.02297 G1 X9.14 Y9.603 E.03965 G1 X9.14 Y12.142 E.08423 G3 X10.261 Y13.619 I-1.084 J1.987 E.06336 G3 X10.191 Y14.274 I-.514 J.276 E.02323 G1 X8.984 Y14.929 E.04554 G2 X8.169 Y16.239 I1.609 J1.909 E.05204 G2 X8.24 Y16.894 I.514 J.276 E.02323 G1 X9.446 Y17.55 E.04554 G3 X10.261 Y18.86 I-1.609 J1.909 E.05204 G3 X10.191 Y19.515 I-.514 J.276 E.02323 G1 X8.984 Y20.17 E.04554 G2 X8.169 Y21.481 I1.609 J1.909 E.05204 G2 X8.24 Y22.136 I.514 J.276 E.02323 G1 X9.446 Y22.791 E.04554 G3 X10.261 Y24.101 I-1.609 J1.909 E.05204 G3 X10.191 Y24.756 I-.514 J.276 E.02323 G1 X8.984 Y25.412 E.04554 G2 X8.169 Y26.722 I1.609 J1.909 E.05204 G2 X8.24 Y27.377 I.514 J.276 E.02323 G1 X9.446 Y28.032 E.04554 G3 X10.261 Y29.343 I-1.609 J1.909 E.05204 G3 X10.191 Y29.998 I-.514 J.276 E.02323 G1 X8.984 Y30.653 E.04554 G2 X8.169 Y31.963 I1.609 J1.909 E.05204 G2 X8.24 Y32.618 I.514 J.276 E.02323 G1 X9.446 Y33.274 E.04554 G3 X10.261 Y34.584 I-1.609 J1.909 E.05204 G3 X10.191 Y35.239 I-.514 J.276 E.02323 G1 X8.984 Y35.894 E.04554 G2 X8.169 Y37.205 I1.609 J1.909 E.05204 G2 X8.24 Y37.86 I.514 J.276 E.02323 G1 X9.446 Y38.515 E.04554 G3 X10.261 Y39.825 I-1.609 J1.909 E.05204 G3 X10.191 Y40.48 I-.514 J.276 E.02323 G1 X8.984 Y41.136 E.04554 G2 X8.169 Y42.446 I1.609 J1.909 E.05204 G2 X8.24 Y43.101 I.514 J.276 E.02323 G1 X9.446 Y43.756 E.04554 G3 X10.261 Y45.066 I-1.609 J1.909 E.05204 G3 X10.191 Y45.722 I-.514 J.276 E.02323 G1 X8.984 Y46.377 E.04554 G2 X8.169 Y47.687 I1.609 J1.909 E.05204 G2 X8.24 Y48.342 I.514 J.276 E.02323 G1 X9.446 Y48.997 E.04554 G3 X10.261 Y50.308 I-1.609 J1.909 E.05204 G3 X10.191 Y50.963 I-.514 J.276 E.02323 G1 X8.984 Y51.618 E.04554 G2 X8.169 Y52.928 I1.609 J1.909 E.05204 G2 X8.24 Y53.584 I.514 J.276 E.02323 G1 X9.446 Y54.239 E.04554 G3 X10.261 Y55.549 I-1.609 J1.909 E.05204 G3 X10.191 Y56.204 I-.514 J.276 E.02323 G1 X8.984 Y56.859 E.04554 G2 X8.169 Y58.17 I1.609 J1.909 E.05204 G2 X8.24 Y58.825 I.514 J.276 E.02323 G1 X9.225 Y59.36 E.03718 G1 X7.665 Y59.36 E.05173 G2 X7.57 Y58.825 I-.439 J-.198 E.01915 G1 X6.363 Y58.17 E.04554 G3 X5.548 Y56.859 I1.609 J-1.909 E.05204 G3 X5.619 Y56.204 I.514 J-.276 E.02323 G1 X6.826 Y55.549 E.04554 G2 X7.641 Y54.239 I-1.609 J-1.909 E.05204 G2 X7.57 Y53.584 I-.514 J-.276 E.02323 G1 X6.363 Y52.928 E.04554 G3 X5.548 Y51.618 I1.609 J-1.909 E.05204 G3 X5.619 Y50.963 I.514 J-.276 E.02323 G1 X6.826 Y50.308 E.04554 G2 X7.641 Y48.997 I-1.609 J-1.909 E.05204 G2 X7.57 Y48.342 I-.514 J-.276 E.02323 G1 X6.363 Y47.687 E.04554 G3 X5.548 Y46.377 I1.609 J-1.909 E.05204 G3 X5.619 Y45.722 I.514 J-.276 E.02323 G1 X6.826 Y45.066 E.04554 G2 X7.641 Y43.756 I-1.609 J-1.909 E.05204 G2 X7.57 Y43.101 I-.514 J-.276 E.02323 G1 X6.363 Y42.446 E.04554 G3 X5.548 Y41.136 I1.609 J-1.909 E.05204 G3 X5.619 Y40.48 I.514 J-.276 E.02323 G1 X6.826 Y39.825 E.04554 G2 X7.641 Y38.515 I-1.609 J-1.909 E.05204 G2 X7.57 Y37.86 I-.514 J-.276 E.02323 G1 X6.363 Y37.205 E.04554 G3 X5.548 Y35.894 I1.609 J-1.909 E.05204 G3 X5.619 Y35.239 I.514 J-.276 E.02323 G1 X6.826 Y34.584 E.04554 G2 X7.641 Y33.274 I-1.609 J-1.909 E.05204 G2 X7.57 Y32.618 I-.514 J-.276 E.02323 G1 X6.363 Y31.963 E.04554 G3 X5.548 Y30.653 I1.609 J-1.909 E.05204 G3 X5.619 Y29.998 I.514 J-.276 E.02323 G1 X6.826 Y29.343 E.04554 G2 X7.641 Y28.032 I-1.609 J-1.909 E.05204 G2 X7.57 Y27.377 I-.514 J-.276 E.02323 G1 X6.363 Y26.722 E.04554 G3 X5.548 Y25.412 I1.609 J-1.909 E.05204 G3 X5.619 Y24.756 I.514 J-.276 E.02323 G1 X6.826 Y24.101 E.04554 G2 X7.641 Y22.791 I-1.609 J-1.909 E.05204 G2 X7.57 Y22.136 I-.514 J-.276 E.02323 G1 X6.363 Y21.481 E.04554 G3 X5.548 Y20.17 I1.609 J-1.909 E.05204 G3 X5.619 Y19.515 I.514 J-.276 E.02323 G1 X6.826 Y18.86 E.04554 G2 X7.641 Y17.55 I-1.609 J-1.909 E.05204 G2 X7.57 Y16.894 I-.514 J-.276 E.02323 G1 X6.363 Y16.239 E.04554 G3 X5.489 Y14.64 I2.097 J-2.185 E.0614 G1 X4.274 Y14.64 E.04029 G2 X2.928 Y16.239 I.904 J2.128 E.07196 G2 X2.998 Y16.894 I.514 J.276 E.02323 G1 X4.205 Y17.55 E.04554 G3 X5.02 Y18.86 I-1.609 J1.909 E.05204 G3 X4.949 Y19.515 I-.514 J.276 E.02323 G1 X3.743 Y20.17 E.04554 G2 X2.928 Y21.481 I1.609 J1.909 E.05204 G2 X2.998 Y22.136 I.514 J.276 E.02323 G1 X4.205 Y22.791 E.04554 G1 X4.683 Y23.36 E.02464 G1 X2.169 Y23.36 E.08337 G1 X2.399 Y22.791 E.02035 G2 X2.329 Y22.136 I-.514 J-.276 E.02323 G1 X1.122 Y21.481 E.04554 G3 X.307 Y20.17 I1.609 J-1.909 E.05204 G3 X.378 Y19.515 I.514 J-.276 E.02323 G1 X1.584 Y18.86 E.04554 G2 X2.399 Y17.55 I-1.609 J-1.909 E.05204 G2 X2.329 Y16.894 I-.514 J-.276 E.02323 G1 X1.122 Y16.239 E.04554 G3 X.248 Y14.64 I2.097 J-2.185 E.0614 G1 X-.967 Y14.64 E.04029 G2 X-2.314 Y16.239 I.904 J2.128 E.07196 G2 X-2.243 Y16.894 I.514 J.276 E.02323 G1 X-1.036 Y17.55 E.04554 G3 X-.221 Y18.86 I-1.609 J1.909 E.05204 G3 X-.292 Y19.515 I-.514 J.276 E.02323 G1 X-1.499 Y20.17 E.04554 G2 X-2.314 Y21.481 I1.609 J1.909 E.05204 G2 X-2.243 Y22.136 I.514 J.276 E.02323 G1 X-1.036 Y22.791 E.04554 G1 X-.559 Y23.36 E.02464 G1 X-3.072 Y23.36 E.08337 G1 X-2.842 Y22.791 E.02035 G2 X-2.913 Y22.136 I-.514 J-.276 E.02323 G1 X-4.119 Y21.481 E.04554 G3 X-4.934 Y20.17 I1.609 J-1.909 E.05204 G3 X-4.864 Y19.515 I.514 J-.276 E.02323 G1 X-3.657 Y18.86 E.04554 G2 X-2.842 Y17.55 I-1.609 J-1.909 E.05204 G2 X-2.913 Y16.894 I-.514 J-.276 E.02323 G1 X-4.119 Y16.239 E.04554 G3 X-4.934 Y14.929 I1.609 J-1.909 E.05204 G3 X-4.94 Y14.456 I.343 J-.241 E.01667 G1 X-4.94 Y9.659 E.15914 G3 X-4.94 Y9.215 I.324 J-.222 E.01565 G1 X-4.94 Y4.417 E.15914 G3 X-4.94 Y3.973 I.324 J-.222 E.01565 G1 X-4.94 Y-.824 E.15914 G3 X-4.94 Y-1.268 I.324 J-.222 E.01565 G1 X-4.94 Y-2.64 E.04552 G1 X-4.684 Y-2.64 E.00849 G1 X-4.646 Y-2.327 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-4.646 Y14.256 E.45944 G1 X-4.627 Y14.346 E.00256 G1 X8.756 Y14.346 E.37079 G1 X8.846 Y14.327 E.00256 G1 X8.846 Y8.133 E.17161 G1 X8.874 Y8.033 E.00287 G1 X9.353 Y8.126 E.01352 G1 X10.047 Y8.126 E.01923 G1 X10.741 Y7.943 E.01987 G1 X11.363 Y7.587 E.01987 G1 X11.873 Y7.082 E.01987 G1 X12.234 Y6.462 E.01987 G1 X12.422 Y5.77 E.01987 G1 X12.426 Y5.053 E.01987 G1 X12.243 Y4.359 E.01987 G1 X11.887 Y3.737 E.01987 G1 X11.382 Y3.227 E.01987 G1 X10.762 Y2.866 E.01987 G1 X10.07 Y2.678 E.01987 G1 X9.353 Y2.674 E.01987 G1 X8.874 Y2.767 E.01352 G1 X8.846 Y2.667 E.00287 G1 X8.846 Y-2.256 E.13637 G1 X8.827 Y-2.346 E.00256 G1 X-4.607 Y-2.336 E.37221 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.662 Y-2.64 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X2.033 Y-2.64 E.05401 G1 X2.134 Y-2.76 E.00521 G2 X2.466 Y-3.743 I-2.501 J-1.392 E.0346 G1 X2.329 Y-4.071 E.01179 G1 X1.122 Y-4.726 E.04554 G3 X.24 Y-6.364 I2.104 J-2.189 E.06272 G1 X.378 Y-6.691 E.01179 G1 X1.584 Y-7.347 E.04554 G2 X2.466 Y-8.984 I-2.104 J-2.189 E.06272 G1 X2.329 Y-9.312 E.01179 G1 X1.122 Y-9.967 E.04554 G3 X.24 Y-11.605 I2.104 J-2.189 E.06272 G1 X.378 Y-11.933 E.01179 G1 X1.584 Y-12.588 E.04554 G2 X2.466 Y-14.226 I-2.104 J-2.189 E.06272 G1 X2.329 Y-14.553 E.01179 G1 X1.122 Y-15.209 E.04554 G3 X.24 Y-16.846 I2.104 J-2.189 E.06272 G1 X.378 Y-17.174 E.01179 G1 X1.584 Y-17.829 E.04554 G2 X2.466 Y-19.467 I-2.104 J-2.189 E.06272 G1 X2.329 Y-19.795 E.01179 G1 X1.122 Y-20.45 E.04554 G3 X.24 Y-22.088 I2.104 J-2.189 E.06272 G1 X.378 Y-22.415 E.01179 G1 X1.584 Y-23.07 E.04554 G2 X2.466 Y-24.708 I-2.104 J-2.189 E.06272 G1 X2.329 Y-25.036 E.01179 G1 X1.122 Y-25.691 E.04554 G3 X.24 Y-27.329 I2.104 J-2.189 E.06272 G1 X.378 Y-27.657 E.01179 G1 X1.584 Y-28.312 E.04554 G2 X2.466 Y-29.95 I-2.104 J-2.189 E.06272 G1 X2.329 Y-30.277 E.01179 G1 X1.122 Y-30.932 E.04554 G3 X.24 Y-32.57 I2.104 J-2.189 E.06272 G1 X.378 Y-32.898 E.01179 G1 X1.584 Y-33.553 E.04554 G2 X2.466 Y-35.191 I-2.104 J-2.189 E.06272 G1 X2.329 Y-35.519 E.01179 G1 X1.122 Y-36.174 E.04554 G3 X.24 Y-37.812 I2.104 J-2.189 E.06272 G1 X.378 Y-38.139 E.01179 G1 X1.584 Y-38.794 E.04554 G2 X2.466 Y-40.432 I-2.104 J-2.189 E.06272 G1 X2.329 Y-40.76 E.01179 G1 X1.122 Y-41.415 E.04554 G3 X.24 Y-43.053 I2.104 J-2.189 E.06272 G1 X.378 Y-43.381 E.01179 G1 X1.584 Y-44.036 E.04554 G2 X2.466 Y-45.674 I-2.104 J-2.189 E.06272 G1 X2.329 Y-46.001 E.01179 G1 X1.122 Y-46.656 E.04554 G3 X.24 Y-48.294 I2.104 J-2.189 E.06272 G1 X.378 Y-48.622 E.01179 G1 X1.584 Y-49.277 E.04554 G2 X2.466 Y-50.915 I-2.104 J-2.189 E.06272 G1 X2.329 Y-51.242 E.01179 G1 X1.122 Y-51.898 E.04554 G3 X.24 Y-53.536 I2.104 J-2.189 E.06272 G1 X.378 Y-53.863 E.01179 G1 X1.584 Y-54.518 E.04554 G2 X2.466 Y-56.156 I-2.104 J-2.189 E.06272 G1 X2.329 Y-56.484 E.01179 G1 X1.122 Y-57.139 E.04554 G3 X.24 Y-58.777 I2.104 J-2.189 E.06272 G1 X.378 Y-59.104 E.01179 G1 X.848 Y-59.36 E.01775 G1 X-.185 Y-59.36 E.03425 G1 X-.292 Y-59.104 E.00919 G1 X-1.499 Y-58.449 E.04554 G2 X-2.381 Y-56.811 I2.104 J2.189 E.06272 G1 X-2.243 Y-56.484 E.01179 G1 X-1.036 Y-55.829 E.04554 G3 X-.154 Y-54.191 I-2.104 J2.189 E.06272 G1 X-.292 Y-53.863 E.01179 G1 X-1.499 Y-53.208 E.04554 G2 X-2.381 Y-51.57 I2.104 J2.189 E.06272 G1 X-2.243 Y-51.242 E.01179 G1 X-1.036 Y-50.587 E.04554 G3 X-.154 Y-48.949 I-2.104 J2.189 E.06272 G1 X-.292 Y-48.622 E.01179 G1 X-1.499 Y-47.967 E.04554 G2 X-2.381 Y-46.329 I2.104 J2.189 E.06272 G1 X-2.243 Y-46.001 E.01179 G1 X-1.036 Y-45.346 E.04554 G3 X-.154 Y-43.708 I-2.104 J2.189 E.06272 G1 X-.292 Y-43.381 E.01179 G1 X-1.499 Y-42.725 E.04554 G2 X-2.381 Y-41.087 I2.104 J2.189 E.06272 G1 X-2.243 Y-40.76 E.01179 G1 X-1.036 Y-40.105 E.04554 G3 X-.154 Y-38.467 I-2.104 J2.189 E.06272 G1 X-.292 Y-38.139 E.01179 G1 X-1.499 Y-37.484 E.04554 G2 X-2.381 Y-35.846 I2.104 J2.189 E.06272 G1 X-2.243 Y-35.519 E.01179 G1 X-1.036 Y-34.863 E.04554 G3 X-.154 Y-33.226 I-2.104 J2.189 E.06272 G1 X-.292 Y-32.898 E.01179 G1 X-1.499 Y-32.243 E.04554 G2 X-2.381 Y-30.605 I2.104 J2.189 E.06272 G1 X-2.243 Y-30.277 E.01179 G1 X-1.036 Y-29.622 E.04554 G3 X-.154 Y-27.984 I-2.104 J2.189 E.06272 G1 X-.292 Y-27.657 E.01179 G1 X-1.499 Y-27.001 E.04554 G2 X-2.381 Y-25.364 I2.104 J2.189 E.06272 G1 X-2.243 Y-25.036 E.01179 G1 X-1.036 Y-24.381 E.04554 G3 X-.154 Y-22.743 I-2.104 J2.189 E.06272 G1 X-.292 Y-22.415 E.01179 G1 X-1.499 Y-21.76 E.04554 G2 X-2.381 Y-20.122 I2.104 J2.189 E.06272 G1 X-2.243 Y-19.795 E.01179 G1 X-1.036 Y-19.14 E.04554 G3 X-.154 Y-17.502 I-2.104 J2.189 E.06272 G1 X-.292 Y-17.174 E.01179 G1 X-1.499 Y-16.519 E.04554 G2 X-2.381 Y-14.881 I2.104 J2.189 E.06272 G1 X-2.243 Y-14.553 E.01179 G1 X-1.036 Y-13.898 E.04554 G3 X-.154 Y-12.26 I-2.104 J2.189 E.06272 G1 X-.292 Y-11.933 E.01179 G1 X-1.499 Y-11.278 E.04554 G2 X-2.381 Y-9.64 I2.104 J2.189 E.06272 G1 X-2.243 Y-9.312 E.01179 G1 X-1.036 Y-8.657 E.04554 G3 X-.154 Y-7.019 I-2.104 J2.189 E.06272 G1 X-.292 Y-6.691 E.01179 G1 X-1.499 Y-6.036 E.04554 G2 X-2.381 Y-4.398 I2.104 J2.189 E.06272 G1 X-2.243 Y-4.071 E.01179 G1 X-1.036 Y-3.416 E.04554 G1 X-.438 Y-2.64 E.0325 G1 X-3.208 Y-2.64 E.09189 G1 X-3.107 Y-2.76 E.00521 G2 X-2.775 Y-3.743 I-2.501 J-1.392 E.0346 G1 X-2.913 Y-4.071 E.01179 G1 X-4.119 Y-4.726 E.04554 G3 X-5.001 Y-6.364 I2.104 J-2.189 E.06272 G1 X-4.864 Y-6.691 E.01179 G1 X-3.657 Y-7.347 E.04554 G2 X-2.775 Y-8.984 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-9.312 E.01179 G1 X-4.119 Y-9.967 E.04554 G3 X-5.001 Y-11.605 I2.104 J-2.189 E.06272 G1 X-4.864 Y-11.933 E.01179 G1 X-3.657 Y-12.588 E.04554 G2 X-2.775 Y-14.226 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-14.553 E.01179 G1 X-4.119 Y-15.209 E.04554 G3 X-5.001 Y-16.846 I2.104 J-2.189 E.06272 G1 X-4.864 Y-17.174 E.01179 G1 X-3.657 Y-17.829 E.04554 G2 X-2.775 Y-19.467 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-19.795 E.01179 G1 X-4.119 Y-20.45 E.04554 G3 X-5.001 Y-22.088 I2.104 J-2.189 E.06272 G1 X-4.864 Y-22.415 E.01179 G1 X-3.657 Y-23.07 E.04554 G2 X-2.775 Y-24.708 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-25.036 E.01179 G1 X-4.119 Y-25.691 E.04554 G3 X-5.001 Y-27.329 I2.104 J-2.189 E.06272 G1 X-4.864 Y-27.657 E.01179 G1 X-3.657 Y-28.312 E.04554 G2 X-2.775 Y-29.95 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-30.277 E.01179 G1 X-4.119 Y-30.932 E.04554 G3 X-5.001 Y-32.57 I2.104 J-2.189 E.06272 G1 X-4.864 Y-32.898 E.01179 G1 X-3.657 Y-33.553 E.04554 G2 X-2.775 Y-35.191 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-35.519 E.01179 G1 X-4.119 Y-36.174 E.04554 G3 X-5.001 Y-37.812 I2.104 J-2.189 E.06272 G1 X-4.864 Y-38.139 E.01179 G1 X-3.657 Y-38.794 E.04554 G2 X-2.775 Y-40.432 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-40.76 E.01179 G1 X-4.119 Y-41.415 E.04554 G3 X-5.001 Y-43.053 I2.104 J-2.189 E.06272 G1 X-4.864 Y-43.381 E.01179 G1 X-3.657 Y-44.036 E.04554 G2 X-2.775 Y-45.674 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-46.001 E.01179 G1 X-4.119 Y-46.656 E.04554 G3 X-5.001 Y-48.294 I2.104 J-2.189 E.06272 G1 X-4.864 Y-48.622 E.01179 G1 X-3.657 Y-49.277 E.04554 G2 X-2.775 Y-50.915 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-51.242 E.01179 G1 X-4.119 Y-51.898 E.04554 G3 X-5.001 Y-53.536 I2.104 J-2.189 E.06272 G1 X-4.864 Y-53.863 E.01179 G1 X-3.657 Y-54.518 E.04554 G2 X-2.775 Y-56.156 I-2.104 J-2.189 E.06272 G1 X-2.913 Y-56.484 E.01179 G1 X-4.119 Y-57.139 E.04554 G3 X-5.001 Y-58.777 I2.104 J-2.189 E.06272 G1 X-4.864 Y-59.104 E.01179 G1 X-4.393 Y-59.36 E.01775 G1 X-5.426 Y-59.36 E.03425 G1 X-5.533 Y-59.104 E.00919 G1 X-6.74 Y-58.449 E.04554 G2 X-7.622 Y-56.811 I2.104 J2.189 E.06272 G1 X-7.484 Y-56.484 E.01179 G1 X-6.278 Y-55.829 E.04554 G3 X-5.396 Y-54.191 I-2.104 J2.189 E.06272 G1 X-5.533 Y-53.863 E.01179 G1 X-6.74 Y-53.208 E.04554 G2 X-7.622 Y-51.57 I2.104 J2.189 E.06272 G1 X-7.484 Y-51.242 E.01179 G1 X-6.278 Y-50.587 E.04554 G3 X-5.396 Y-48.949 I-2.104 J2.189 E.06272 G1 X-5.533 Y-48.622 E.01179 G1 X-6.74 Y-47.967 E.04554 G2 X-7.622 Y-46.329 I2.104 J2.189 E.06272 G1 X-7.484 Y-46.001 E.01179 G1 X-6.278 Y-45.346 E.04554 G3 X-5.396 Y-43.708 I-2.104 J2.189 E.06272 G1 X-5.533 Y-43.381 E.01179 G1 X-6.74 Y-42.725 E.04554 G2 X-7.622 Y-41.087 I2.104 J2.189 E.06272 G1 X-7.484 Y-40.76 E.01179 G1 X-6.278 Y-40.105 E.04554 G3 X-5.396 Y-38.467 I-2.104 J2.189 E.06272 G1 X-5.533 Y-38.139 E.01179 G1 X-6.74 Y-37.484 E.04554 G2 X-7.622 Y-35.846 I2.104 J2.189 E.06272 G1 X-7.484 Y-35.519 E.01179 G1 X-6.278 Y-34.863 E.04554 G3 X-5.396 Y-33.226 I-2.104 J2.189 E.06272 G1 X-5.533 Y-32.898 E.01179 G1 X-6.74 Y-32.243 E.04554 G2 X-7.622 Y-30.605 I2.104 J2.189 E.06272 G1 X-7.484 Y-30.277 E.01179 G1 X-6.278 Y-29.622 E.04554 G3 X-5.396 Y-27.984 I-2.104 J2.189 E.06272 G1 X-5.533 Y-27.657 E.01179 G1 X-6.74 Y-27.001 E.04554 G2 X-7.622 Y-25.364 I2.104 J2.189 E.06272 G1 X-7.484 Y-25.036 E.01179 G1 X-6.278 Y-24.381 E.04554 G3 X-5.396 Y-22.743 I-2.104 J2.189 E.06272 G1 X-5.533 Y-22.415 E.01179 G1 X-6.74 Y-21.76 E.04554 G2 X-7.622 Y-20.122 I2.104 J2.189 E.06272 G1 X-7.484 Y-19.795 E.01179 G1 X-6.278 Y-19.14 E.04554 G3 X-5.396 Y-17.502 I-2.104 J2.189 E.06272 G1 X-5.533 Y-17.174 E.01179 G1 X-6.74 Y-16.519 E.04554 G2 X-7.622 Y-14.881 I2.104 J2.189 E.06272 G1 X-7.484 Y-14.553 E.01179 G1 X-6.278 Y-13.898 E.04554 G3 X-5.396 Y-12.26 I-2.104 J2.189 E.06272 G1 X-5.533 Y-11.933 E.01179 G1 X-6.74 Y-11.278 E.04554 G2 X-7.622 Y-9.64 I2.104 J2.189 E.06272 G1 X-7.484 Y-9.312 E.01179 G1 X-6.278 Y-8.657 E.04554 G3 X-5.396 Y-7.019 I-2.104 J2.189 E.06272 G1 X-5.533 Y-6.691 E.01179 G1 X-6.74 Y-6.036 E.04554 G2 X-7.622 Y-4.398 I2.104 J2.189 E.06272 G1 X-7.484 Y-4.071 E.01179 G1 X-6.278 Y-3.416 E.04554 G3 X-5.396 Y-1.778 I-2.104 J2.189 E.06272 G1 X-5.533 Y-1.45 E.01179 G1 X-6.74 Y-.795 E.04554 G2 X-7.622 Y.843 I2.104 J2.189 E.06272 G1 X-7.484 Y1.171 E.01179 G1 X-6.278 Y1.826 E.04554 G3 X-5.396 Y3.464 I-2.104 J2.189 E.06272 G1 X-5.533 Y3.791 E.01179 G1 X-6.74 Y4.446 E.04554 G2 X-7.622 Y6.084 I2.104 J2.189 E.06272 G1 X-7.484 Y6.412 E.01179 G1 X-6.278 Y7.067 E.04554 G3 X-5.396 Y8.705 I-2.104 J2.189 E.06272 G1 X-5.533 Y9.033 E.01179 G1 X-6.74 Y9.688 E.04554 G2 X-7.622 Y11.326 I2.104 J2.189 E.06272 G1 X-7.484 Y11.653 E.01179 G1 X-6.278 Y12.308 E.04554 G3 X-5.396 Y13.946 I-2.104 J2.189 E.06272 G1 X-5.533 Y14.274 E.01179 G1 X-6.74 Y14.929 E.04554 G2 X-7.622 Y16.567 I2.104 J2.189 E.06272 G1 X-7.484 Y16.894 E.01179 G1 X-6.278 Y17.55 E.04554 G3 X-5.396 Y19.188 I-2.104 J2.189 E.06272 G1 X-5.533 Y19.515 E.01179 G1 X-6.74 Y20.17 E.04554 G2 X-7.622 Y21.808 I2.104 J2.189 E.06272 G1 X-7.484 Y22.136 E.01179 G1 X-6.278 Y22.791 E.04554 G1 X-5.8 Y23.36 E.02464 G1 X-8.313 Y23.36 E.08337 G2 X-8.016 Y22.463 I-2.284 J-1.255 E.0315 G1 X-8.154 Y22.136 E.01179 G1 X-9.361 Y21.481 E.04554 G3 X-10.243 Y19.843 I2.104 J-2.189 E.06272 G1 X-10.105 Y19.515 E.01179 G1 X-8.898 Y18.86 E.04554 G2 X-8.016 Y17.222 I-2.104 J-2.189 E.06272 G1 X-8.154 Y16.894 E.01179 G1 X-9.361 Y16.239 E.04554 G3 X-10.243 Y14.601 I2.104 J-2.189 E.06272 G1 X-10.105 Y14.274 E.01179 G1 X-8.898 Y13.619 E.04554 G2 X-8.016 Y11.981 I-2.104 J-2.189 E.06272 G1 X-8.154 Y11.653 E.01179 G1 X-9.361 Y10.998 E.04554 G3 X-10.243 Y9.36 I2.104 J-2.189 E.06272 G1 X-10.105 Y9.033 E.01179 G1 X-8.898 Y8.377 E.04554 G2 X-8.016 Y6.739 I-2.104 J-2.189 E.06272 G1 X-8.154 Y6.412 E.01179 G1 X-9.361 Y5.757 E.04554 G3 X-10.243 Y4.119 I2.104 J-2.189 E.06272 G1 X-10.105 Y3.791 E.01179 G1 X-8.898 Y3.136 E.04554 G2 X-8.016 Y1.498 I-2.104 J-2.189 E.06272 G1 X-8.154 Y1.171 E.01179 G1 X-9.361 Y.515 E.04554 G3 X-10.243 Y-1.123 I2.103 J-2.189 E.06272 G1 X-10.105 Y-1.45 E.01179 G1 X-8.898 Y-2.105 E.04554 G2 X-8.016 Y-3.743 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-4.071 E.01179 G1 X-9.361 Y-4.726 E.04554 G3 X-10.243 Y-6.364 I2.103 J-2.189 E.06272 G1 X-10.105 Y-6.691 E.01179 G1 X-8.898 Y-7.347 E.04554 G2 X-8.016 Y-8.984 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-9.312 E.01179 G1 X-9.361 Y-9.967 E.04554 G3 X-10.243 Y-11.605 I2.104 J-2.189 E.06272 G1 X-10.105 Y-11.933 E.01179 G1 X-8.898 Y-12.588 E.04554 G2 X-8.016 Y-14.226 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-14.553 E.01179 G1 X-9.361 Y-15.209 E.04554 G3 X-10.243 Y-16.846 I2.104 J-2.189 E.06272 G1 X-10.105 Y-17.174 E.01179 G1 X-8.898 Y-17.829 E.04554 G2 X-8.016 Y-19.467 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-19.795 E.01179 G1 X-9.361 Y-20.45 E.04554 G3 X-10.243 Y-22.088 I2.103 J-2.189 E.06272 G1 X-10.105 Y-22.415 E.01179 G1 X-8.898 Y-23.07 E.04554 G2 X-8.016 Y-24.708 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-25.036 E.01179 G1 X-9.361 Y-25.691 E.04554 G3 X-10.243 Y-27.329 I2.103 J-2.189 E.06272 G1 X-10.105 Y-27.657 E.01179 G1 X-8.898 Y-28.312 E.04554 G2 X-8.016 Y-29.95 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-30.277 E.01179 G1 X-9.361 Y-30.932 E.04554 G3 X-10.243 Y-32.57 I2.103 J-2.189 E.06272 G1 X-10.105 Y-32.898 E.01179 G1 X-8.898 Y-33.553 E.04554 G2 X-8.016 Y-35.191 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-35.519 E.01179 G1 X-9.361 Y-36.174 E.04554 G3 X-10.243 Y-37.812 I2.103 J-2.189 E.06272 G1 X-10.105 Y-38.139 E.01179 G1 X-8.898 Y-38.794 E.04554 G2 X-8.016 Y-40.432 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-40.76 E.01179 G1 X-9.361 Y-41.415 E.04554 G3 X-10.243 Y-43.053 I2.104 J-2.189 E.06272 G1 X-10.105 Y-43.381 E.01179 G1 X-8.898 Y-44.036 E.04554 G2 X-8.016 Y-45.674 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-46.001 E.01179 G1 X-9.361 Y-46.656 E.04554 G3 X-10.243 Y-48.294 I2.103 J-2.189 E.06272 G1 X-10.105 Y-48.622 E.01179 G1 X-8.898 Y-49.277 E.04554 G2 X-8.016 Y-50.915 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-51.242 E.01179 G1 X-9.361 Y-51.898 E.04554 G3 X-10.243 Y-53.536 I2.103 J-2.189 E.06272 G1 X-10.105 Y-53.863 E.01179 G1 X-8.898 Y-54.518 E.04554 G2 X-8.016 Y-56.156 I-2.104 J-2.189 E.06272 G1 X-8.154 Y-56.484 E.01179 G1 X-9.361 Y-57.139 E.04554 G3 X-10.243 Y-58.777 I2.103 J-2.189 E.06272 G1 X-10.105 Y-59.104 E.01179 G1 X-9.635 Y-59.36 E.01775 G1 X-10.667 Y-59.36 E.03425 G1 X-10.775 Y-59.104 E.00919 G1 X-11.981 Y-58.449 E.04554 G2 X-12.863 Y-56.811 I2.104 J2.189 E.06272 G1 X-12.726 Y-56.484 E.01179 G1 X-11.519 Y-55.829 E.04554 G3 X-10.637 Y-54.191 I-2.104 J2.189 E.06272 G1 X-10.775 Y-53.863 E.01179 G1 X-11.981 Y-53.208 E.04554 G2 X-12.863 Y-51.57 I2.104 J2.189 E.06272 G1 X-12.726 Y-51.242 E.01179 G1 X-11.519 Y-50.587 E.04554 G3 X-10.637 Y-48.949 I-2.104 J2.189 E.06272 G1 X-10.775 Y-48.622 E.01179 G1 X-11.981 Y-47.967 E.04554 G2 X-12.863 Y-46.329 I2.104 J2.189 E.06272 G1 X-12.726 Y-46.001 E.01179 G1 X-11.519 Y-45.346 E.04554 G3 X-10.637 Y-43.708 I-2.104 J2.189 E.06272 G1 X-10.775 Y-43.381 E.01179 G1 X-11.981 Y-42.725 E.04554 G2 X-12.863 Y-41.087 I2.104 J2.189 E.06272 G1 X-12.726 Y-40.76 E.01179 G1 X-11.519 Y-40.105 E.04554 G3 X-10.637 Y-38.467 I-2.104 J2.189 E.06272 G1 X-10.775 Y-38.139 E.01179 G1 X-11.981 Y-37.484 E.04554 G2 X-12.863 Y-35.846 I2.104 J2.189 E.06272 G1 X-12.726 Y-35.519 E.01179 G1 X-11.519 Y-34.863 E.04554 G3 X-10.637 Y-33.226 I-2.104 J2.189 E.06272 G1 X-10.775 Y-32.898 E.01179 G1 X-11.981 Y-32.243 E.04554 G2 X-12.863 Y-30.605 I2.104 J2.189 E.06272 G1 X-12.726 Y-30.277 E.01179 G1 X-11.519 Y-29.622 E.04554 G3 X-10.637 Y-27.984 I-2.104 J2.189 E.06272 G1 X-10.775 Y-27.657 E.01179 G1 X-11.981 Y-27.001 E.04554 G2 X-12.863 Y-25.364 I2.104 J2.189 E.06272 G1 X-12.726 Y-25.036 E.01179 G1 X-11.519 Y-24.381 E.04554 G3 X-10.637 Y-22.743 I-2.104 J2.189 E.06272 G1 X-10.775 Y-22.415 E.01179 G1 X-11.981 Y-21.76 E.04554 G2 X-12.863 Y-20.122 I2.104 J2.189 E.06272 G1 X-12.726 Y-19.795 E.01179 G1 X-11.519 Y-19.14 E.04554 G3 X-10.637 Y-17.502 I-2.104 J2.189 E.06272 G1 X-10.775 Y-17.174 E.01179 G1 X-11.981 Y-16.519 E.04554 G2 X-12.863 Y-14.881 I2.104 J2.189 E.06272 G1 X-12.726 Y-14.553 E.01179 G1 X-11.519 Y-13.898 E.04554 G3 X-10.637 Y-12.26 I-2.104 J2.189 E.06272 G1 X-10.775 Y-11.933 E.01179 G1 X-11.981 Y-11.278 E.04554 G2 X-12.863 Y-9.64 I2.104 J2.189 E.06272 G1 X-12.726 Y-9.312 E.01179 G1 X-11.519 Y-8.657 E.04554 G3 X-10.637 Y-7.019 I-2.104 J2.189 E.06272 G1 X-10.775 Y-6.691 E.01179 G1 X-11.981 Y-6.036 E.04554 G2 X-12.863 Y-4.398 I2.104 J2.189 E.06272 G1 X-12.726 Y-4.071 E.01179 G1 X-11.519 Y-3.416 E.04554 G3 X-10.637 Y-1.778 I-2.104 J2.189 E.06272 G1 X-10.775 Y-1.45 E.01179 G1 X-11.981 Y-.795 E.04554 G2 X-12.863 Y.843 I2.104 J2.189 E.06272 G1 X-12.726 Y1.171 E.01179 G1 X-11.519 Y1.826 E.04554 G3 X-10.637 Y3.464 I-2.104 J2.189 E.06272 G1 X-10.775 Y3.791 E.01179 G1 X-11.981 Y4.446 E.04554 G2 X-12.863 Y6.084 I2.104 J2.189 E.06272 G1 X-12.726 Y6.412 E.01179 G1 X-11.519 Y7.067 E.04554 G3 X-10.637 Y8.705 I-2.104 J2.189 E.06272 G1 X-10.775 Y9.033 E.01179 G1 X-11.981 Y9.688 E.04554 G2 X-12.863 Y11.326 I2.104 J2.189 E.06272 G1 X-12.726 Y11.653 E.01179 G1 X-11.519 Y12.308 E.04554 G3 X-10.637 Y13.946 I-2.104 J2.189 E.06272 G1 X-10.775 Y14.274 E.01179 G1 X-11.981 Y14.929 E.04554 G2 X-12.863 Y16.567 I2.104 J2.189 E.06272 G1 X-12.726 Y16.894 E.01179 G1 X-11.519 Y17.55 E.04554 G3 X-10.637 Y19.188 I-2.104 J2.189 E.06272 G1 X-10.775 Y19.515 E.01179 G1 X-11.981 Y20.17 E.04554 G2 X-12.863 Y21.808 I2.104 J2.189 E.06272 G1 X-12.726 Y22.136 E.01179 G1 X-11.519 Y22.791 E.04554 G1 X-11.041 Y23.36 E.02464 G1 X-13.555 Y23.36 E.08337 G2 X-13.258 Y22.463 I-2.284 J-1.255 E.0315 G1 X-13.395 Y22.136 E.01179 G1 X-14.602 Y21.481 E.04554 G3 X-15.484 Y19.843 I2.104 J-2.189 E.06272 G1 X-15.346 Y19.515 E.01179 G1 X-14.14 Y18.86 E.04554 G2 X-13.258 Y17.222 I-2.104 J-2.189 E.06272 G1 X-13.395 Y16.894 E.01179 G1 X-14.602 Y16.239 E.04554 G3 X-15.484 Y14.601 I2.104 J-2.189 E.06272 G1 X-15.346 Y14.274 E.01179 G1 X-14.14 Y13.619 E.04554 G2 X-13.258 Y11.981 I-2.104 J-2.189 E.06272 G1 X-13.395 Y11.653 E.01179 G1 X-14.602 Y10.998 E.04554 G3 X-15.484 Y9.36 I2.104 J-2.189 E.06272 G1 X-15.346 Y9.033 E.01179 G1 X-14.14 Y8.377 E.04554 G2 X-13.258 Y6.739 I-2.104 J-2.189 E.06272 G1 X-13.395 Y6.412 E.01179 G1 X-14.602 Y5.757 E.04554 G3 X-15.484 Y4.119 I2.104 J-2.189 E.06272 G1 X-15.346 Y3.791 E.01179 G1 X-14.14 Y3.136 E.04554 G2 X-13.258 Y1.498 I-2.104 J-2.189 E.06272 G1 X-13.395 Y1.171 E.01179 G1 X-14.602 Y.515 E.04554 G3 X-15.484 Y-1.123 I2.104 J-2.189 E.06272 G1 X-15.346 Y-1.45 E.01179 G1 X-14.14 Y-2.105 E.04554 G2 X-13.258 Y-3.743 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-4.071 E.01179 G1 X-14.602 Y-4.726 E.04554 G3 X-15.484 Y-6.364 I2.104 J-2.189 E.06272 G1 X-15.346 Y-6.691 E.01179 G1 X-14.14 Y-7.347 E.04554 G2 X-13.258 Y-8.984 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-9.312 E.01179 G1 X-14.602 Y-9.967 E.04554 G3 X-15.484 Y-11.605 I2.104 J-2.189 E.06272 G1 X-15.346 Y-11.933 E.01179 G1 X-14.14 Y-12.588 E.04554 G2 X-13.258 Y-14.226 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-14.553 E.01179 G1 X-14.602 Y-15.209 E.04554 G3 X-15.484 Y-16.846 I2.104 J-2.189 E.06272 G1 X-15.346 Y-17.174 E.01179 G1 X-14.14 Y-17.829 E.04554 G2 X-13.258 Y-19.467 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-19.795 E.01179 G1 X-14.602 Y-20.45 E.04554 G1 X-15.152 Y-21.105 E.02838 G3 X-15.418 Y-22.246 I11.728 J-3.333 E.03886 G1 X-15.346 Y-22.415 E.00611 G1 X-14.14 Y-23.07 E.04554 G2 X-13.258 Y-24.708 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-25.036 E.01179 G1 X-14.602 Y-25.691 E.04554 G3 X-15.484 Y-27.329 I2.104 J-2.189 E.06272 G1 X-15.346 Y-27.657 E.01179 G1 X-14.14 Y-28.312 E.04554 G2 X-13.258 Y-29.95 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-30.277 E.01179 G1 X-14.602 Y-30.932 E.04554 G3 X-15.484 Y-32.57 I2.104 J-2.189 E.06272 G1 X-15.346 Y-32.898 E.01179 G1 X-14.14 Y-33.553 E.04554 G2 X-13.258 Y-35.191 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-35.519 E.01179 G1 X-14.602 Y-36.174 E.04554 G3 X-15.484 Y-37.812 I2.104 J-2.189 E.06272 G1 X-15.346 Y-38.139 E.01179 G1 X-14.14 Y-38.794 E.04554 G2 X-13.258 Y-40.432 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-40.76 E.01179 G1 X-14.602 Y-41.415 E.04554 G3 X-15.484 Y-43.053 I2.104 J-2.189 E.06272 G1 X-15.346 Y-43.381 E.01179 G1 X-14.14 Y-44.036 E.04554 G2 X-13.258 Y-45.674 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-46.001 E.01179 G1 X-14.602 Y-46.656 E.04554 G3 X-15.484 Y-48.294 I2.104 J-2.189 E.06272 G1 X-15.346 Y-48.622 E.01179 G1 X-14.14 Y-49.277 E.04554 G2 X-13.258 Y-50.915 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-51.242 E.01179 G1 X-14.602 Y-51.898 E.04554 G3 X-15.484 Y-53.536 I2.104 J-2.189 E.06272 G1 X-15.346 Y-53.863 E.01179 G1 X-14.14 Y-54.518 E.04554 G2 X-13.258 Y-56.156 I-2.104 J-2.189 E.06272 G1 X-13.395 Y-56.484 E.01179 G1 X-14.602 Y-57.139 E.04554 G3 X-15.484 Y-58.777 I2.104 J-2.189 E.06272 G1 X-15.346 Y-59.104 E.01179 G1 X-14.876 Y-59.36 E.01775 G1 X-15.909 Y-59.36 E.03425 G1 X-16.016 Y-59.104 E.00919 M73 P32 R55 G1 X-17.223 Y-58.449 E.04554 G2 X-18.105 Y-56.811 I2.104 J2.189 E.06272 G1 X-17.967 Y-56.484 E.01179 G1 X-16.76 Y-55.829 E.04554 G3 X-15.878 Y-54.191 I-2.104 J2.189 E.06272 G1 X-16.016 Y-53.863 E.01179 G1 X-17.223 Y-53.208 E.04554 G2 X-18.105 Y-51.57 I2.104 J2.189 E.06272 G1 X-17.967 Y-51.242 E.01179 G1 X-16.76 Y-50.587 E.04554 G3 X-15.878 Y-48.949 I-2.104 J2.189 E.06272 G1 X-16.016 Y-48.622 E.01179 G1 X-17.223 Y-47.967 E.04554 G2 X-18.105 Y-46.329 I2.104 J2.189 E.06272 G1 X-17.967 Y-46.001 E.01179 G1 X-16.76 Y-45.346 E.04554 G3 X-15.878 Y-43.708 I-2.104 J2.189 E.06272 G1 X-16.016 Y-43.381 E.01179 G1 X-17.223 Y-42.725 E.04554 G1 X-17.622 Y-42.25 E.0206 G2 X-20.109 Y-41.732 I-.658 J3.071 E.08677 G3 X-20.725 Y-43.053 I2.143 J-1.803 E.04891 G1 X-20.588 Y-43.381 E.01179 G1 X-19.381 Y-44.036 E.04554 G2 X-18.499 Y-45.674 I-2.104 J-2.189 E.06272 G1 X-18.637 Y-46.001 E.01179 G1 X-19.843 Y-46.656 E.04554 G3 X-20.725 Y-48.294 I2.104 J-2.189 E.06272 G1 X-20.588 Y-48.622 E.01179 G1 X-19.381 Y-49.277 E.04554 G2 X-18.499 Y-50.915 I-2.104 J-2.189 E.06272 G1 X-18.637 Y-51.242 E.01179 G1 X-19.843 Y-51.898 E.04554 G3 X-20.725 Y-53.536 I2.104 J-2.189 E.06272 G1 X-20.588 Y-53.863 E.01179 G1 X-19.381 Y-54.518 E.04554 G2 X-18.499 Y-56.156 I-2.104 J-2.189 E.06272 G1 X-18.637 Y-56.484 E.01179 G1 X-19.843 Y-57.139 E.04554 G3 X-20.725 Y-58.777 I2.104 J-2.189 E.06272 G1 X-20.588 Y-59.104 E.01179 G1 X-20.117 Y-59.36 E.01775 G1 X-21.15 Y-59.36 E.03425 G1 X-21.257 Y-59.104 E.00919 G1 X-22.464 Y-58.449 E.04554 G2 X-23.346 Y-56.811 I2.104 J2.189 E.06272 G1 X-23.208 Y-56.484 E.01179 G1 X-22.002 Y-55.829 E.04554 G3 X-21.12 Y-54.191 I-2.104 J2.189 E.06272 G1 X-21.257 Y-53.863 E.01179 G1 X-22.464 Y-53.208 E.04554 G2 X-23.346 Y-51.57 I2.104 J2.189 E.06272 G1 X-23.208 Y-51.242 E.01179 G1 X-22.002 Y-50.587 E.04554 G3 X-21.12 Y-48.949 I-2.104 J2.189 E.06272 G1 X-21.257 Y-48.622 E.01179 G1 X-22.464 Y-47.967 E.04554 G2 X-23.346 Y-46.329 I2.104 J2.189 E.06272 G1 X-23.208 Y-46.001 E.01179 G1 X-22.002 Y-45.346 E.04554 G3 X-21.12 Y-43.708 I-2.104 J2.189 E.06272 G1 X-21.257 Y-43.381 E.01179 G1 X-22.464 Y-42.725 E.04554 G2 X-23.346 Y-41.087 I2.104 J2.189 E.06272 G1 X-23.208 Y-40.76 E.01179 G1 X-22.002 Y-40.105 E.04554 G1 X-21.452 Y-39.45 E.02838 G3 X-21.18 Y-38.323 I-11.143 J3.283 E.03845 G1 X-21.257 Y-38.139 E.00662 G1 X-22.464 Y-37.484 E.04554 G2 X-23.346 Y-35.846 I2.104 J2.189 E.06272 G1 X-23.208 Y-35.519 E.01179 G1 X-22.002 Y-34.863 E.04554 G3 X-21.12 Y-33.226 I-2.104 J2.189 E.06272 G1 X-21.257 Y-32.898 E.01179 G1 X-22.464 Y-32.243 E.04554 G2 X-23.346 Y-30.605 I2.104 J2.189 E.06272 G1 X-23.208 Y-30.277 E.01179 G1 X-22.002 Y-29.622 E.04554 G3 X-21.12 Y-27.984 I-2.104 J2.189 E.06272 G1 X-21.257 Y-27.657 E.01179 G1 X-22.464 Y-27.001 E.04554 G2 X-23.346 Y-25.364 I2.104 J2.189 E.06272 G1 X-23.208 Y-25.036 E.01179 G1 X-22.002 Y-24.381 E.04554 G3 X-21.12 Y-22.743 I-2.104 J2.189 E.06272 G1 X-21.257 Y-22.415 E.01179 G1 X-22.464 Y-21.76 E.04554 G2 X-23.346 Y-20.122 I2.104 J2.189 E.06272 G1 X-23.208 Y-19.795 E.01179 G1 X-22.002 Y-19.14 E.04554 G3 X-21.12 Y-17.502 I-2.104 J2.189 E.06272 G1 X-21.257 Y-17.174 E.01179 G1 X-22.464 Y-16.519 E.04554 G2 X-23.346 Y-14.881 I2.104 J2.189 E.06272 G1 X-23.208 Y-14.553 E.01179 G1 X-22.002 Y-13.898 E.04554 G3 X-21.12 Y-12.26 I-2.104 J2.189 E.06272 G1 X-21.257 Y-11.933 E.01179 G1 X-22.464 Y-11.278 E.04554 G2 X-23.346 Y-9.64 I2.104 J2.189 E.06272 G1 X-23.208 Y-9.312 E.01179 G1 X-22.002 Y-8.657 E.04554 G3 X-21.12 Y-7.019 I-2.104 J2.189 E.06272 G1 X-21.257 Y-6.691 E.01179 G1 X-22.464 Y-6.036 E.04554 G2 X-23.346 Y-4.398 I2.104 J2.189 E.06272 G1 X-23.208 Y-4.071 E.01179 G1 X-22.002 Y-3.416 E.04554 G1 X-21.403 Y-2.64 E.0325 G1 X-18.932 Y-2.64 E.08197 G1 X-18.831 Y-2.76 E.00521 G2 X-18.499 Y-3.743 I-2.501 J-1.392 E.0346 G1 X-18.637 Y-4.071 E.01179 G1 X-19.843 Y-4.726 E.04554 G3 X-20.725 Y-6.364 I2.104 J-2.189 E.06272 G1 X-20.588 Y-6.691 E.01179 G1 X-19.381 Y-7.347 E.04554 G2 X-18.499 Y-8.984 I-2.104 J-2.189 E.06272 G1 X-18.637 Y-9.312 E.01179 G1 X-19.843 Y-9.967 E.04554 G3 X-20.725 Y-11.605 I2.104 J-2.189 E.06272 G1 X-20.588 Y-11.933 E.01179 G1 X-19.381 Y-12.588 E.04554 G2 X-18.499 Y-14.226 I-2.104 J-2.189 E.06272 G1 X-18.637 Y-14.553 E.01179 G1 X-19.843 Y-15.209 E.04554 G3 X-20.725 Y-16.846 I2.104 J-2.189 E.06272 G1 X-20.588 Y-17.174 E.01179 G1 X-19.381 Y-17.829 E.04554 G1 X-18.966 Y-18.324 E.02142 G2 X-16.505 Y-18.835 I.628 J-3.155 E.08566 G3 X-15.878 Y-17.502 I-2.133 J1.816 E.04945 G1 X-16.016 Y-17.174 E.01179 G1 X-17.223 Y-16.519 E.04554 G2 X-18.105 Y-14.881 I2.104 J2.189 E.06272 G1 X-17.967 Y-14.553 E.01179 G1 X-16.76 Y-13.898 E.04554 G3 X-15.878 Y-12.26 I-2.104 J2.189 E.06272 G1 X-16.016 Y-11.933 E.01179 G1 X-17.223 Y-11.278 E.04554 G2 X-18.105 Y-9.64 I2.104 J2.189 E.06272 G1 X-17.967 Y-9.312 E.01179 G1 X-16.76 Y-8.657 E.04554 G3 X-15.878 Y-7.019 I-2.104 J2.189 E.06272 G1 X-16.016 Y-6.691 E.01179 G1 X-17.223 Y-6.036 E.04554 G2 X-18.105 Y-4.398 I2.104 J2.189 E.06272 G1 X-17.967 Y-4.071 E.01179 G1 X-16.76 Y-3.416 E.04554 G1 X-16.162 Y-2.64 E.0325 G1 X-17.79 Y-2.64 E.05401 G1 X-15.954 Y-2.256 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-15.973 Y-2.346 E.00256 G1 X-29.356 Y-2.346 E.37079 G1 X-29.446 Y-2.327 E.00256 G1 X-29.446 Y2.667 E.13836 G1 X-29.474 Y2.767 E.00287 G1 X-29.953 Y2.674 E.01352 G1 X-30.647 Y2.674 E.01923 G1 X-31.341 Y2.857 E.01987 G1 X-31.963 Y3.213 E.01987 G1 X-32.473 Y3.718 E.01987 G1 X-32.834 Y4.338 E.01987 G1 X-33.022 Y5.03 E.01987 G1 X-33.026 Y5.747 E.01987 G1 X-32.843 Y6.441 E.01987 G1 X-32.487 Y7.063 E.01987 G1 X-31.982 Y7.573 E.01987 G1 X-31.362 Y7.934 E.01987 G1 X-30.67 Y8.122 E.01987 G1 X-29.953 Y8.126 E.01987 G1 X-29.474 Y8.033 E.01352 G1 X-29.446 Y8.133 E.00287 G1 X-29.446 Y14.256 E.16962 G1 X-29.427 Y14.346 E.00256 G1 X-16.044 Y14.346 E.37079 G1 X-15.954 Y14.327 E.00256 G1 X-15.954 Y-2.216 E.45834 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.262 Y-18.755 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-16.636 Y-19.101 E.0198 G1 X-16.127 Y-19.606 E.01988 G1 X-15.819 Y-20.125 E.01672 G1 X-15.656 Y-20.578 E.01334 G1 X-15.563 Y-21.288 E.01984 G1 X-15.656 Y-21.997 E.0198 G1 X-15.916 Y-22.632 E.01901 G1 X-16.127 Y-22.97 E.01105 G1 X-16.618 Y-23.461 E.01923 G1 X-17.102 Y-23.755 E.0157 G1 X-17.58 Y-23.94 E.01418 G1 X-18.288 Y-24.036 E.01981 G1 X-18.983 Y-23.948 E.0194 G1 X-19.659 Y-23.663 E.02034 G1 X-20.117 Y-23.334 E.01563 G1 X-20.474 Y-22.968 E.01416 G1 X-20.824 Y-22.345 E.0198 G1 X-21.012 Y-21.655 E.01979 G1 X-21.014 Y-20.941 E.01979 G1 X-20.832 Y-20.25 E.01979 G1 X-20.477 Y-19.63 E.01979 G1 X-19.974 Y-19.123 E.01979 G1 X-19.357 Y-18.764 E.01979 G1 X-18.667 Y-18.576 E.01979 G1 X-17.953 Y-18.574 E.01979 G1 X-17.301 Y-18.745 E.01868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.493 Y-22.434 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-15.642 Y-22.766 E.01205 G3 X-16.21 Y-23.726 I3.644 J-2.804 E.0371 G1 X-16.76 Y-24.381 E.02838 G1 X-17.967 Y-25.036 E.04554 G1 X-18.105 Y-25.364 E.01179 G3 X-17.223 Y-27.001 I2.986 J.551 E.06272 G1 X-16.016 Y-27.657 E.04554 G1 X-15.878 Y-27.984 E.01179 G2 X-16.76 Y-29.622 I-2.986 J.551 E.06272 G1 X-17.967 Y-30.277 E.04554 G1 X-18.105 Y-30.605 E.01179 G3 X-17.223 Y-32.243 I2.986 J.551 E.06272 G1 X-16.016 Y-32.898 E.04554 G1 X-15.878 Y-33.226 E.01179 G2 X-16.76 Y-34.863 I-2.986 J.551 E.06272 G1 X-17.967 Y-35.519 E.04554 G3 X-18.001 Y-36.264 I.702 J-.406 E.02572 G2 X-16.499 Y-36.838 I-.32 J-3.087 E.05395 G1 X-17.602 Y-36.642 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-16.941 Y-36.913 E.01979 G1 X-16.372 Y-37.346 E.01979 G1 X-15.933 Y-37.909 E.01979 G1 X-15.649 Y-38.565 E.01981 G1 X-15.553 Y-39.276 E.01987 G1 X-15.643 Y-39.988 E.01987 G1 X-15.915 Y-40.652 E.01987 G1 X-16.349 Y-41.223 E.01987 G1 X-16.916 Y-41.662 E.01987 G1 X-17.578 Y-41.939 E.01987 G1 X-18.288 Y-42.036 E.01987 G1 X-19 Y-41.945 E.01987 G1 X-19.664 Y-41.673 E.01987 G1 X-20.121 Y-41.339 E.0157 G1 X-20.474 Y-40.968 E.01418 G1 X-20.763 Y-40.483 E.01564 G1 X-20.941 Y-40.004 E.01416 G1 X-21.037 Y-39.298 E.01974 G1 X-20.946 Y-38.59 E.01979 G1 X-20.675 Y-37.929 E.01979 G1 X-20.242 Y-37.36 E.01979 G1 X-19.677 Y-36.923 E.01979 G1 X-19.018 Y-36.647 E.01979 G1 X-18.31 Y-36.552 E.01979 G1 X-17.641 Y-36.637 E.01868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.114 Y-38.13 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-20.573 Y-37.274 I6.171 J-3.3 E.03365 G1 X-20.393 Y-36.829 E.01591 G1 X-19.843 Y-36.174 E.02838 G1 X-18.637 Y-35.519 E.04554 G3 X-18.566 Y-34.863 I-.443 J.379 E.02323 G3 X-19.381 Y-33.553 I-2.424 J-.599 E.05204 G1 X-20.588 Y-32.898 E.04554 G2 X-20.658 Y-32.243 I.443 J.379 E.02323 G2 X-19.843 Y-30.932 I2.424 J-.599 E.05204 G1 X-18.637 Y-30.277 E.04554 G3 X-18.566 Y-29.622 I-.443 J.379 E.02323 G3 X-19.381 Y-28.312 I-2.424 J-.599 E.05204 G1 X-20.588 Y-27.657 E.04554 G2 X-20.658 Y-27.001 I.443 J.379 E.02323 G2 X-19.843 Y-25.691 I2.424 J-.599 E.05204 G1 X-18.637 Y-25.036 E.04554 G3 X-18.595 Y-24.309 I-.697 J.405 E.02505 G2 X-20.098 Y-23.739 I.291 J3.035 E.05397 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-19.465 Y-24.1 G1 X-18.595 Y-24.309 G1 X-18.507 Y-24.675 ;WIPE_END G1 X-24.2 Y-29.759 Z2.4 F30000 G1 X-37.741 Y-41.849 Z2.4 G1 Z2 G1 E.8 F1800 G1 F16200 G3 X-36.178 Y-42.221 I1.454 J2.644 E.05395 G1 X-36.382 Y-42.725 E.01805 G3 X-36.311 Y-43.381 I.514 J-.276 E.02323 G1 X-35.105 Y-44.036 E.04554 G2 X-34.29 Y-45.346 I-1.609 J-1.909 E.05204 G2 X-34.361 Y-46.001 I-.514 J-.276 E.02323 G1 X-35.567 Y-46.656 E.04554 G3 X-36.382 Y-47.967 I1.609 J-1.909 E.05204 G3 X-36.311 Y-48.622 I.514 J-.276 E.02323 G1 X-35.105 Y-49.277 E.04554 G2 X-34.29 Y-50.587 I-1.609 J-1.909 E.05204 G2 X-34.361 Y-51.242 I-.514 J-.276 E.02323 G1 X-35.567 Y-51.898 E.04554 G3 X-36.382 Y-53.208 I1.609 J-1.909 E.05204 G3 X-35.94 Y-54.065 I.579 J-.244 E.03645 G1 X-35.94 Y-57.583 E.11672 G1 X-36.117 Y-57.794 E.00913 G1 X-36.382 Y-58.449 E.02344 G3 X-35.94 Y-59.306 I.579 J-.244 E.03645 G1 X-35.94 Y-59.36 E.00178 G1 X-36.874 Y-59.36 E.03097 G1 X-36.981 Y-59.104 E.00919 G1 X-38.188 Y-58.449 E.04554 G2 X-39.003 Y-57.139 I1.609 J1.909 E.05204 G2 X-38.932 Y-56.484 I.514 J.276 E.02323 G1 X-37.726 Y-55.829 E.04554 G3 X-36.911 Y-54.518 I-1.609 J1.909 E.05204 G3 X-36.981 Y-53.863 I-.514 J.276 E.02323 G1 X-38.188 Y-53.208 E.04554 G2 X-39.003 Y-51.898 I1.609 J1.909 E.05204 G2 X-38.932 Y-51.242 I.514 J.276 E.02323 G1 X-37.726 Y-50.587 E.04554 G3 X-36.911 Y-49.277 I-1.609 J1.909 E.05204 G3 X-36.981 Y-48.622 I-.514 J.276 E.02323 G1 X-38.188 Y-47.967 E.04554 G2 X-39.003 Y-46.656 I1.609 J1.909 E.05204 G2 X-38.932 Y-46.001 I.514 J.276 E.02323 G1 X-37.726 Y-45.346 E.04554 G3 X-36.911 Y-44.036 I-1.609 J1.909 E.05204 G3 X-36.981 Y-43.381 I-.514 J.276 E.02323 G1 X-38.188 Y-42.725 E.04554 G2 X-39.003 Y-41.415 I1.609 J1.909 E.05204 G2 X-38.932 Y-40.76 I.514 J.276 E.02323 G1 X-38.87 Y-40.726 E.00235 G3 X-38.53 Y-41.21 I3.283 J1.947 E.01963 G1 X-38.529 Y-41.719 E.01689 G1 X-38.232 Y-41.599 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-38.068 Y-41.725 E.00573 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-38.232 Y-41.599 ;WIPE_END G1 X-41.27 Y-48.601 Z2.4 F30000 G1 X-43.022 Y-52.64 Z2.4 G1 Z2 M73 P32 R54 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.394 Y-52.64 E.05401 G3 X-41.69 Y-53.536 I2.281 J-1.253 E.03146 G1 X-41.553 Y-53.863 E.01179 G1 X-40.346 Y-54.518 E.04554 G2 X-39.464 Y-56.156 I-2.103 J-2.189 E.06272 G1 X-39.602 Y-56.484 E.01179 G1 X-40.808 Y-57.139 E.04554 G3 X-41.69 Y-58.777 I2.104 J-2.189 E.06272 G1 X-41.553 Y-59.104 E.01179 G1 X-41.083 Y-59.36 E.01775 G1 X-42.115 Y-59.36 E.03425 G1 X-42.222 Y-59.104 E.00919 G1 X-43.429 Y-58.449 E.04554 G2 X-44.311 Y-56.811 I2.104 J2.189 E.06272 G1 X-44.173 Y-56.484 E.01179 G1 X-42.967 Y-55.829 E.04554 G3 X-42.085 Y-54.191 I-2.104 J2.189 E.06272 G1 X-42.222 Y-53.863 E.01179 G1 X-43.429 Y-53.208 E.04554 G1 X-43.906 Y-52.64 E.02459 G1 X-46.635 Y-52.64 E.09054 G3 X-46.932 Y-53.536 I2.281 J-1.253 E.03146 G1 X-46.794 Y-53.863 E.01179 G1 X-45.587 Y-54.518 E.04554 G2 X-44.705 Y-56.156 I-2.104 J-2.189 E.06272 G1 X-44.843 Y-56.484 E.01179 G1 X-46.05 Y-57.139 E.04554 G3 X-46.932 Y-58.777 I2.104 J-2.189 E.06272 G1 X-46.794 Y-59.104 E.01179 G1 X-46.324 Y-59.36 E.01775 G1 X-47.356 Y-59.36 E.03425 G1 X-47.464 Y-59.104 E.00919 G1 X-48.67 Y-58.449 E.04554 G2 X-49.552 Y-56.811 I2.104 J2.189 E.06272 G1 X-49.415 Y-56.484 E.01179 G1 X-48.208 Y-55.829 E.04554 G3 X-47.326 Y-54.191 I-2.104 J2.189 E.06272 G1 X-47.464 Y-53.863 E.01179 G1 X-48.67 Y-53.208 E.04554 G1 X-49.147 Y-52.64 E.02459 G1 X-51.16 Y-52.64 E.06677 G1 X-51.16 Y-54.339 E.05634 G1 X-50.829 Y-54.518 E.01249 G2 X-49.947 Y-56.156 I-2.104 J-2.189 E.06272 G1 X-50.084 Y-56.484 E.01179 G1 X-51.16 Y-57.068 E.04059 G1 X-51.16 Y-58.696 E.05401 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.451 Y-60 ;WIPE_END G1 X-31.652 Y-52.692 Z2.4 F30000 G1 X-46.437 Y-3.599 Z2.4 G1 Z2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-44.909 Y-3.079 I-.396 J3.67 E.05398 G2 X-44.843 Y-4.071 I-.803 J-.551 E.03462 G1 X-45.375 Y-4.36 E.02009 G1 X-44.295 Y-4.36 E.03584 G1 X-44.173 Y-4.071 E.0104 G1 X-42.967 Y-3.416 E.04554 G3 X-42.152 Y-2.105 I-1.609 J1.909 E.05204 G3 X-42.222 Y-1.45 I-.514 J.276 E.02323 G1 X-43.293 Y-.869 E.04041 G3 X-43.524 Y1.523 I-3.751 J.845 E.08107 G3 X-42.152 Y3.136 I-.888 J2.146 E.07293 G3 X-42.222 Y3.791 I-.514 J.276 E.02323 G1 X-43.429 Y4.446 E.04554 G2 X-44.244 Y5.757 I1.609 J1.909 E.05204 G2 X-44.173 Y6.412 I.514 J.276 E.02323 G1 X-42.967 Y7.067 E.04554 G3 X-42.152 Y8.377 I-1.609 J1.909 E.05204 G3 X-42.222 Y9.033 I-.514 J.276 E.02323 G1 X-43.429 Y9.688 E.04554 G2 X-44.244 Y10.998 I1.609 J1.909 E.05204 G2 X-44.173 Y11.653 I.514 J.276 E.02323 G1 X-42.967 Y12.308 E.04554 G3 X-42.152 Y13.619 I-1.609 J1.909 E.05204 G3 X-42.222 Y14.274 I-.514 J.276 E.02323 G1 X-43.429 Y14.929 E.04554 G2 X-44.244 Y16.239 I1.609 J1.909 E.05204 G2 X-44.173 Y16.894 I.514 J.276 E.02323 G1 X-43.316 Y17.36 E.03235 G1 X-44.734 Y17.36 E.04701 G2 X-44.843 Y16.894 I-.395 J-.153 E.01685 G1 X-46.05 Y16.239 E.04554 G3 X-46.865 Y14.929 I1.609 J-1.909 E.05204 G3 X-46.794 Y14.274 I.514 J-.276 E.02323 G1 X-45.587 Y13.619 E.04554 G2 X-44.772 Y12.308 I-1.609 J-1.909 E.05204 G2 X-44.843 Y11.653 I-.514 J-.276 E.02323 G1 X-46.05 Y10.998 E.04554 G3 X-46.865 Y9.688 I1.609 J-1.909 E.05204 G3 X-46.794 Y9.033 I.514 J-.276 E.02323 G1 X-45.587 Y8.377 E.04554 G2 X-44.772 Y7.067 I-1.609 J-1.909 E.05204 G2 X-44.843 Y6.412 I-.514 J-.276 E.02323 G1 X-46.05 Y5.757 E.04554 G3 X-46.865 Y4.446 I1.609 J-1.909 E.05204 G3 X-46.44 Y3.599 I.572 J-.244 E.03576 G3 X-47.37 Y3.568 I-.198 J-7.99 E.03088 G1 X-47.464 Y3.791 E.00804 G1 X-48.16 Y4.169 E.02627 G1 X-48.16 Y7.125 E.09804 G3 X-47.393 Y8.377 I-1.544 J1.806 E.04953 G3 X-47.464 Y9.033 I-.514 J.276 E.02323 G1 X-48.16 Y9.41 E.02627 G1 X-48.16 Y12.366 E.09804 G3 X-47.393 Y13.619 I-1.544 J1.806 E.04953 G3 X-47.464 Y14.274 I-.514 J.276 E.02323 G1 X-48.16 Y14.652 E.02627 G1 X-48.16 Y16.28 E.05401 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-47.222 Y32.64 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-47.446 Y32.64 E.00742 G1 X-47.446 Y32.844 E.00675 G1 X-48.16 Y32.844 E.02368 G1 X-48.16 Y33.331 E.01617 G3 X-47.393 Y34.584 I-1.544 J1.806 E.04953 G3 X-47.464 Y35.239 I-.514 J.276 E.02323 G1 X-48.16 Y35.617 E.02627 G1 X-48.16 Y37.156 E.05106 G1 X-47.446 Y37.156 E.02368 G1 X-47.446 Y37.36 E.00675 G1 X-45.764 Y37.36 E.0558 G3 X-46.865 Y35.894 I1.105 J-1.976 E.0626 G3 X-46.794 Y35.239 I.514 J-.276 E.02323 G1 X-45.587 Y34.584 E.04554 G2 X-44.772 Y33.274 I-1.609 J-1.909 E.05204 G2 X-44.834 Y32.64 I-.494 J-.272 E.02243 G1 X-44.133 Y32.64 E.02325 G1 X-42.967 Y33.274 E.04403 G3 X-42.152 Y34.584 I-1.609 J1.909 E.05204 G3 X-42.222 Y35.239 I-.514 J.276 E.02323 G1 X-43.429 Y35.894 E.04554 G2 X-44.276 Y37.36 I2.133 J2.21 E.05688 G1 X-42.16 Y37.36 E.07019 G1 X-42.16 Y39.806 E.08113 G3 X-42.16 Y40.331 I-.736 J.263 E.01779 G1 X-42.16 Y45.047 E.15643 G3 X-42.16 Y45.573 I-.736 J.263 E.01779 G1 X-42.16 Y50.288 E.15643 G3 X-42.16 Y50.814 I-.736 J.263 E.01779 G1 X-42.16 Y52.442 E.05401 G1 X-41.973 Y57.88 F30000 G1 F16200 G2 X-42.938 Y56.593 I-2.942 J1.201 E.05396 G1 X-42.222 Y56.204 E.02702 G2 X-42.152 Y55.549 I-.443 J-.379 E.02323 G2 X-42.967 Y54.239 I-2.424 J.599 E.05204 G1 X-44.173 Y53.584 E.04554 G3 X-44.127 Y52.64 I.829 J-.432 E.03284 G1 X-46.292 Y52.64 E.07179 G1 X-46.05 Y52.928 E.01248 G1 X-44.843 Y53.584 E.04554 G3 X-44.772 Y54.239 I-.443 J.379 E.02323 G3 X-45.587 Y55.549 I-2.424 J-.599 E.05204 G1 X-46.794 Y56.204 E.04554 G2 X-46.88 Y56.784 I.381 J.353 E.02067 G2 X-47.82 Y59.36 I2.291 J2.295 E.0939 G1 X-48.16 Y59.36 E.01127 G1 X-48.16 Y56.582 E.09214 G1 X-47.464 Y56.204 E.02627 G2 X-47.393 Y55.549 I-.443 J-.379 E.02323 G2 X-48.16 Y54.296 I-2.311 J.553 E.04953 G1 X-48.16 Y52.844 E.04819 G1 X-47.984 Y52.844 E.00583 G1 X-48.3 Y52.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y37.744 E.57795 G1 X-42.16 Y31.477 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.16 Y29.849 E.05401 G2 X-42.16 Y29.323 I-.736 J-.263 E.01779 G1 X-42.16 Y24.607 E.15643 G2 X-42.16 Y24.082 I-.736 J-.263 E.01779 G1 X-42.16 Y19.366 E.15643 G2 X-42.16 Y18.84 I-.736 J-.263 E.01779 G1 X-42.16 Y18.73 E.00366 G1 X-42.196 Y18.75 E.00138 G1 X-42.475 Y18.135 E.0224 G1 X-42.16 Y17.96 E.01196 G1 X-42.16 Y17.36 E.01992 G1 X-42.827 Y17.36 E.02213 G1 X-49.135 Y1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393963 G1 F12000 G3 X-49.211 Y.863 I8.099 J-1.76 E.0117 ;WIDTH:0.344557 G1 X-49.232 Y.745 E.00294 ;WIDTH:0.307218 G1 X-49.248 Y.613 E.00286 ;WIDTH:0.276404 G1 X-49.263 Y.495 E.00226 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00752 G1 X-49.264 Y-.485 E.00748 ;WIDTH:0.275112 G1 X-49.248 Y-.613 E.00245 ;WIDTH:0.305487 G1 X-49.234 Y-.731 E.00254 ;WIDTH:0.342222 G1 X-49.211 Y-.863 E.00326 ;WIDTH:0.385477 G1 X-49.191 Y-.981 E.00334 ;WIDTH:0.409517 G1 X-49.135 Y-1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.191 Y-.981 ;WIPE_END G1 X-45.208 Y5.53 Z2.4 F30000 G1 X-25.556 Y37.654 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-25.646 Y37.673 E.00256 G1 X-25.646 Y48.256 E.29321 G1 X-25.627 Y48.346 E.00256 G1 X4.956 Y48.346 E.84732 G1 X5.046 Y48.327 E.00256 G1 X5.046 Y37.744 E.29321 G1 X5.027 Y37.654 E.00256 G1 X-25.516 Y37.654 E.84622 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.411 Y59.36 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-23.783 Y59.36 E.05401 G2 X-23.878 Y58.825 I-.439 J-.198 E.01915 G1 X-25.084 Y58.17 E.04554 G3 X-25.899 Y56.859 I1.609 J-1.909 E.05204 G3 X-25.829 Y56.204 I.514 J-.276 E.02323 G1 X-24.622 Y55.549 E.04554 G2 X-23.807 Y54.239 I-1.609 J-1.909 E.05204 G2 X-23.878 Y53.584 I-.514 J-.276 E.02323 G1 X-25.084 Y52.928 E.04554 G3 X-25.899 Y51.618 I1.609 J-1.909 E.05204 G3 X-25.829 Y50.963 I.514 J-.276 E.02323 G1 X-24.622 Y50.308 E.04554 G2 X-23.74 Y48.67 I-2.104 J-2.189 E.06272 G1 X-22.66 Y48.64 E.03586 G3 X-21.187 Y50.308 I-.83 J2.218 E.07683 G3 X-21.257 Y50.963 I-.514 J.276 E.02323 G1 X-22.464 Y51.618 E.04554 G2 X-23.279 Y52.928 I1.609 J1.909 E.05204 G2 X-23.208 Y53.584 I.514 J.276 E.02323 G1 X-22.002 Y54.239 E.04554 G3 X-21.187 Y55.549 I-1.609 J1.909 E.05204 G3 X-21.257 Y56.204 I-.514 J.276 E.02323 G1 X-22.464 Y56.859 E.04554 G2 X-23.279 Y58.17 I1.609 J1.909 E.05204 G2 X-23.208 Y58.825 I.514 J.276 E.02323 G1 X-22.223 Y59.36 E.03718 G1 X-18.541 Y59.36 E.12213 G2 X-18.637 Y58.825 I-.439 J-.198 E.01915 G1 X-19.843 Y58.17 E.04554 G3 X-20.658 Y56.859 I1.609 J-1.909 E.05204 G3 X-20.588 Y56.204 I.514 J-.276 E.02323 G1 X-19.381 Y55.549 E.04554 G2 X-18.566 Y54.239 I-1.609 J-1.909 E.05204 G2 X-18.637 Y53.584 I-.514 J-.276 E.02323 G1 X-19.843 Y52.928 E.04554 G3 X-20.658 Y51.618 I1.609 J-1.909 E.05204 G3 X-20.588 Y50.963 I.514 J-.276 E.02323 G1 X-19.381 Y50.308 E.04554 G2 X-18.499 Y48.67 I-2.104 J-2.189 E.06272 G1 X-17.418 Y48.64 E.03586 G3 X-15.945 Y50.308 I-.83 J2.218 E.07683 G3 X-16.016 Y50.963 I-.514 J.276 E.02323 G1 X-17.223 Y51.618 E.04554 G2 X-18.038 Y52.928 I1.609 J1.909 E.05204 G2 X-17.967 Y53.584 I.514 J.276 E.02323 G1 X-16.76 Y54.239 E.04554 G3 X-15.945 Y55.549 I-1.609 J1.909 E.05204 G3 X-16.016 Y56.204 I-.514 J.276 E.02323 G1 X-17.223 Y56.859 E.04554 G2 X-18.038 Y58.17 I1.609 J1.909 E.05204 G2 X-17.967 Y58.825 I.514 J.276 E.02323 G1 X-16.982 Y59.36 E.03718 G1 X-13.3 Y59.36 E.12213 G2 X-13.395 Y58.825 I-.439 J-.198 E.01915 G1 X-14.602 Y58.17 E.04554 G3 X-15.417 Y56.859 I1.609 J-1.909 E.05204 G3 X-15.346 Y56.204 I.514 J-.276 E.02323 G1 X-14.14 Y55.549 E.04554 G2 X-13.325 Y54.239 I-1.609 J-1.909 E.05204 G2 X-13.395 Y53.584 I-.514 J-.276 E.02323 G1 X-14.602 Y52.928 E.04554 G3 X-15.417 Y51.618 I1.609 J-1.909 E.05204 G3 X-15.346 Y50.963 I.514 J-.276 E.02323 G1 X-14.14 Y50.308 E.04554 G2 X-13.258 Y48.67 I-2.104 J-2.189 E.06272 G1 X-12.177 Y48.64 E.03586 G3 X-10.704 Y50.308 I-.83 J2.218 E.07683 G3 X-10.775 Y50.963 I-.514 J.276 E.02323 G1 X-11.981 Y51.618 E.04554 G2 X-12.796 Y52.928 I1.609 J1.909 E.05204 G2 X-12.726 Y53.584 I.514 J.276 E.02323 G1 X-11.519 Y54.239 E.04554 G3 X-10.704 Y55.549 I-1.609 J1.909 E.05204 G3 X-10.775 Y56.204 I-.514 J.276 E.02323 G1 X-11.981 Y56.859 E.04554 G2 X-12.796 Y58.17 I1.609 J1.909 E.05204 G2 X-12.726 Y58.825 I.514 J.276 E.02323 G1 X-11.74 Y59.36 E.03718 G1 X-8.059 Y59.36 E.12213 G2 X-8.154 Y58.825 I-.439 J-.198 E.01915 G1 X-9.361 Y58.17 E.04554 G3 X-10.176 Y56.859 I1.609 J-1.909 E.05204 G3 X-10.105 Y56.204 I.514 J-.276 E.02323 G1 X-8.898 Y55.549 E.04554 G2 X-8.083 Y54.239 I-1.609 J-1.909 E.05204 G2 X-8.154 Y53.584 I-.514 J-.276 E.02323 G1 X-9.361 Y52.928 E.04554 G3 X-10.176 Y51.618 I1.609 J-1.909 E.05204 G3 X-10.105 Y50.963 I.514 J-.276 E.02323 G1 X-8.898 Y50.308 E.04554 G2 X-8.016 Y48.67 I-2.104 J-2.189 E.06272 G1 X-6.936 Y48.64 E.03586 G3 X-5.463 Y50.308 I-.83 J2.218 E.07683 G3 X-5.533 Y50.963 I-.514 J.276 E.02323 G1 X-6.74 Y51.618 E.04554 G2 X-7.555 Y52.928 I1.609 J1.909 E.05204 G2 X-7.484 Y53.584 I.514 J.276 E.02323 G1 X-6.278 Y54.239 E.04554 G3 X-5.463 Y55.549 I-1.609 J1.909 E.05204 G3 X-5.533 Y56.204 I-.514 J.276 E.02323 G1 X-6.74 Y56.859 E.04554 G2 X-7.555 Y58.17 I1.609 J1.909 E.05204 G2 X-7.484 Y58.825 I.514 J.276 E.02323 G1 X-6.499 Y59.36 E.03718 G1 X-2.817 Y59.36 E.12213 G2 X-2.913 Y58.825 I-.439 J-.198 E.01915 G1 X-4.119 Y58.17 E.04554 G3 X-4.934 Y56.859 I1.609 J-1.909 E.05204 G3 X-4.864 Y56.204 I.514 J-.276 E.02323 G1 X-3.657 Y55.549 E.04554 G2 X-2.842 Y54.239 I-1.609 J-1.909 E.05204 G2 X-2.913 Y53.584 I-.514 J-.276 E.02323 G1 X-4.119 Y52.928 E.04554 G3 X-4.934 Y51.618 I1.609 J-1.909 E.05204 G3 X-4.864 Y50.963 I.514 J-.276 E.02323 G1 X-3.657 Y50.308 E.04554 G2 X-2.775 Y48.67 I-2.104 J-2.189 E.06272 G1 X-1.694 Y48.64 E.03586 G3 X-.221 Y50.308 I-.83 J2.218 E.07683 G3 X-.292 Y50.963 I-.514 J.276 E.02323 G1 X-1.499 Y51.618 E.04554 G2 X-2.314 Y52.928 I1.609 J1.909 E.05204 G2 X-2.243 Y53.584 I.514 J.276 E.02323 G1 X-1.036 Y54.239 E.04554 G3 X-.221 Y55.549 I-1.609 J1.909 E.05204 G3 X-.292 Y56.204 I-.514 J.276 E.02323 G1 X-1.499 Y56.859 E.04554 G2 X-2.314 Y58.17 I1.609 J1.909 E.05204 G2 X-2.243 Y58.825 I.514 J.276 E.02323 G1 X-1.258 Y59.36 E.03718 G1 X2.424 Y59.36 E.12213 G2 X2.329 Y58.825 I-.439 J-.198 E.01915 G1 X1.122 Y58.17 E.04554 G3 X.307 Y56.859 I1.609 J-1.909 E.05204 G3 X.378 Y56.204 I.514 J-.276 E.02323 G1 X1.584 Y55.549 E.04554 G2 X2.399 Y54.239 I-1.609 J-1.909 E.05204 G2 X2.329 Y53.584 I-.514 J-.276 E.02323 G1 X1.122 Y52.928 E.04554 G3 X.307 Y51.618 I1.609 J-1.909 E.05204 G3 X.378 Y50.963 I.514 J-.276 E.02323 G1 X1.584 Y50.308 E.04554 G2 X2.466 Y48.67 I-2.104 J-2.189 E.06272 G1 X3.547 Y48.64 E.03586 G3 X5.02 Y50.308 I-.83 J2.218 E.07683 G3 X4.949 Y50.963 I-.514 J.276 E.02323 G1 X3.743 Y51.618 E.04554 G2 X2.928 Y52.928 I1.609 J1.909 E.05204 G2 X2.998 Y53.584 I.514 J.276 E.02323 G1 X4.205 Y54.239 E.04554 G3 X5.02 Y55.549 I-1.609 J1.909 E.05204 G3 X4.949 Y56.204 I-.514 J.276 E.02323 G1 X3.743 Y56.859 E.04554 G2 X2.928 Y58.17 I1.609 J1.909 E.05204 G2 X2.998 Y58.825 I.514 J.276 E.02323 G1 X3.983 Y59.36 E.03718 G1 X5.612 Y59.36 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X3.983 Y59.36 G1 X3.657 Y59.182 ;WIPE_END G1 X11.289 Y59.167 Z2.4 F30000 G1 X27.235 Y59.136 Z2.4 G1 Z2 G1 E.8 F1800 G1 F16200 G1 X27.22 Y59.36 E.00744 G1 X27.56 Y59.36 E.01127 G1 X27.56 Y58.295 E.03531 G3 X26.836 Y57.478 I.962 J-1.581 E.03676 G3 X26.446 Y56.532 I1.674 J-1.242 E.0343 G1 X26.584 Y56.204 E.01179 G1 X27.56 Y55.675 E.03682 G1 X27.56 Y53.054 E.08693 G2 X26.846 Y52.844 I-.565 J.602 E.0256 G1 X26.846 Y52.64 E.00675 G1 X24.009 Y52.64 E.09409 G2 X23.964 Y53.584 I.783 J.511 E.03284 G1 X25.17 Y54.239 E.04554 G3 X26.052 Y55.877 I-2.104 J2.189 E.06272 G3 X25.365 Y56.188 I-.408 J.014 E.03193 G2 X21.543 Y57.521 I-1.13 J2.906 E.14613 G1 X21.537 Y57.515 E.00029 G3 X21.205 Y56.532 I2.501 J-1.392 E.0346 G1 X21.343 Y56.204 E.01179 G1 X22.549 Y55.549 E.04554 G2 X23.432 Y53.911 I-2.104 J-2.189 E.06272 G1 X23.294 Y53.584 E.01179 G1 X22.087 Y52.928 E.04554 G1 X21.845 Y52.64 E.01248 G1 X21.56 Y52.64 E.00947 G1 X21.537 Y52.273 E.0122 G3 X21.205 Y51.291 I2.501 J-1.392 E.0346 G3 X21.56 Y50.845 I.455 J-.001 E.0204 G1 X21.537 Y47.032 E.12649 G3 X21.205 Y46.049 I2.501 J-1.392 E.0346 G3 X21.56 Y45.604 I.455 J-.001 E.0204 G1 X21.537 Y41.791 E.12649 G3 X21.205 Y40.808 I2.501 J-1.392 E.0346 G3 X21.56 Y40.363 I.455 J-.001 E.0204 G1 X21.56 Y37.36 E.09961 G1 X22.373 Y37.36 E.02698 G1 X22.087 Y37.205 E.01079 G3 X21.205 Y35.567 I2.104 J-2.189 E.06272 G1 X21.343 Y35.239 E.01179 G1 X22.549 Y34.584 E.04554 G2 X23.432 Y32.946 I-2.104 J-2.189 E.06272 G1 X23.303 Y32.64 E.011 G1 X24.004 Y32.64 E.02325 G1 X25.17 Y33.274 E.04403 G3 X26.052 Y34.911 I-2.104 J2.189 E.06272 G1 X25.914 Y35.239 E.01179 G1 X24.708 Y35.894 E.04554 G2 X23.861 Y37.36 I2.133 J2.21 E.05688 G1 X26.846 Y37.36 E.09901 G1 X26.846 Y37.156 E.00675 G1 X27.288 Y37.156 E.01466 G3 X26.446 Y35.567 I2.092 J-2.125 E.06061 G1 X26.584 Y35.239 E.01179 G1 X27.56 Y34.709 E.03682 G1 X27.56 Y33.081 E.05401 G1 X27.7 Y32.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y17.744 E.57795 G1 X27.7 Y37.744 F30000 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X27.7 Y50.256 ;WIPE_END G1 X22.427 Y44.737 Z2.4 F30000 G1 X-42.652 Y-23.367 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:2.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.6 I-.257 J1.189 P1 F30000 G1 X49.483 Y-1.655 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.524 Y-1.663 E.00139 G1 X50 Y-1.758 E.01608 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.444 Y-1.647 E.00395 G1 X49.568 Y-1.228 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.609 Y-1.236 E.00128 G1 X50 Y-1.314 E.01224 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.529 Y-1.22 E.001 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.609 Y-1.236 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.204 Y-.518 ;WIPE_END G1 X50.42 Y-2.111 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.47 Y-2.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.49 Y-2.541 E.00062 G1 X50.991 Y-2.392 E.01604 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.431 Y-2.547 E.01329 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.49 Y-2.541 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.086 Y-1.519 ;WIPE_END G1 X44.497 Y-.708 Z2.6 F30000 G1 X28.119 Y1.042 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X27.883 Y1.381 E.01271 G3 X25.566 Y-2.091 I-1.693 J-1.38 E.25087 G3 X26.054 Y-2.178 I.662 J2.303 E.01527 G3 X28.13 Y1.005 I.136 J2.18 E.14161 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X27.883 Y1.381 G1 X27.586 Y1.689 G1 X27.23 Y1.927 G1 X26.834 Y2.091 G1 X26.626 Y2.143 G1 X26.576 Y2.148 ;WIPE_END G1 X19.126 Y.49 Z2.6 F30000 G1 X7.71 Y-2.052 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.151 J2.165 E.33495 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.271 J2.027 E.24841 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.563 Y4.259 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.718 Y4.12 E.00639 G3 X9.084 Y3.912 I.972 J1.282 E.01296 G3 X9.558 Y3.799 I.642 J1.64 E.01504 G3 X8.534 Y4.284 I.132 J1.603 E.27496 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.718 Y4.12 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.558 Y3.799 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.378 Y3.943 G1 X10.379 Y3.943 ;WIPE_END G1 X3.171 Y6.452 Z2.6 F30000 G1 X-16.248 Y13.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.147 J-2.165 E.33451 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-31.17 Y7.248 I.331 J-2.195 E.02096 G3 X-29.054 Y3.776 I.873 J-1.848 E.22741 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.462 Y8.976 Z2.6 F30000 G1 X-29.167 Y6.533 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-30.916 Y3.912 I-1.143 J-1.132 E.17524 G3 X-30.442 Y3.799 I.642 J1.64 E.01504 G3 X-29.139 Y6.505 I.132 J1.603 E.11903 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.32 Y6.678 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.974 Y6.859 ;WIPE_END G1 X-27.466 Y.081 Z2.6 F30000 G1 X-15.987 Y-22.093 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.941 Y-21.92 E.00592 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35157 G3 X-18.497 Y-23.73 I1.508 J2.008 E.04666 G3 X-16.043 Y-22.223 I.188 J2.444 E.10208 G1 X-16.003 Y-22.129 E.00338 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.388 Y-22.001 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.385 Y-21.977 E.00081 G3 X-19.323 Y-23.06 I-1.924 J.691 E.30769 G3 X-18.47 Y-23.323 I.997 J1.72 E.02987 G3 X-16.538 Y-22.306 I.161 J2.038 E.07643 G1 X-16.406 Y-22.037 E.00994 G1 X-16.786 Y-21.822 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.715 Y-21.497 E.01021 G3 X-18.916 Y-22.776 I-1.595 J.211 E.22029 G3 X-18.442 Y-22.889 I.642 J1.64 E.01504 G3 X-16.805 Y-21.855 I.132 J1.603 E.06381 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.715 Y-21.497 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.843 Y-20.61 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.279 Y-20.046 ;WIPE_END G1 X-18.346 Y-27.603 Z2.6 F30000 G1 X-20.211 Y-40.824 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.036 Y-41.024 E.00881 G3 X-19.794 Y-41.235 I1.728 J1.739 E.01066 G3 X-18.497 Y-41.73 I1.508 J2.008 E.04666 G3 X-20.249 Y-40.783 I.188 J2.444 E.44294 G1 X-20.238 Y-40.795 E.00052 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.905 Y-40.555 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.749 Y-40.737 E.00793 G3 X-19.323 Y-41.06 I1.44 J1.451 E.01778 G3 X-18.47 Y-41.323 I.997 J1.72 E.02987 G3 X-19.933 Y-40.527 I.161 J2.038 E.36913 G1 X-19.578 Y-40.269 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.441 Y-40.429 E.00648 G3 X-18.916 Y-40.776 I1.131 J1.143 E.01945 G3 X-18.442 Y-40.889 I.642 J1.64 E.01504 G3 X-19.603 Y-40.243 I.132 J1.603 E.26847 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.441 Y-40.429 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.442 Y-40.889 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.818 Y-40.821 ;WIPE_END G1 X-20.314 Y-33.609 Z2.6 F30000 G1 X-42.748 Y31.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z2.6 F30000 G1 X-42.748 Y51.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z2.6 F30000 G1 X4.752 Y47.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z2.6 F30000 G1 X4.752 Y33.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z2.6 F30000 G1 X27.252 Y31.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z2.6 F30000 G1 X-28.09 Y-52.948 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X26.507 Y58.178 I-2.255 J-.94 E.06009 G2 X21.935 Y59.948 I-2.31 J.823 E.25992 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32013 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z2.6 F30000 G1 X7.055 Y-53.79 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z2.6 F30000 G1 X-40.155 Y-5.355 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.444 J1.451 E.1952 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.289 Y57.626 I-1.607 J-1.342 E.09861 G2 X-46.572 Y60.023 I-1.511 J1.377 E.19837 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.291 Y-2.765 Z2.6 F30000 G1 X-48.787 Y-.886 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.733 Y-1.033 E.00482 G3 X-47.434 Y-2.091 I1.923 J1.035 E.05282 G3 X-46.946 Y-2.178 I.662 J2.303 E.01527 G3 X-48.898 Y-.637 I.136 J2.18 E.34028 G1 X-48.803 Y-.849 E.00716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.733 Y-1.033 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.348 Y-2.113 ;WIPE_END G1 X-47.206 Y5.518 Z2.6 F30000 G1 X-46.195 Y59.805 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.32 Y59.555 E.00858 G3 X-45.416 Y57.512 I1.51 J-.553 E.07588 G3 X-44.942 Y57.399 I.642 J1.64 E.01504 G3 X-46.185 Y59.837 I.132 J1.603 E.21 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.32 Y59.555 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.031 Y57.967 ;WIPE_END G1 X-38.402 Y58.171 Z2.6 F30000 G1 X22.805 Y59.805 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.707 Y59.618 E.00647 G3 X23.395 Y57.605 I1.486 J-.616 E.07141 G3 X24.058 Y57.399 I.785 J1.354 E.02153 G3 X22.819 Y59.838 I.135 J1.603 E.21007 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.707 Y59.618 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.967 Y57.968 ;WIPE_END G1 X17.579 Y52.563 Z2.6 F30000 G1 X-40.59 Y-5.79 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 M73 P33 R54 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-41.492 Y-3.254 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-40.069 Y-4.045 E.05401 G1 X-39.828 Y-3.743 E.01279 G3 X-40.268 Y-2.105 I-1.859 J.379 E.05832 G1 X-40.491 Y-1.922 E.0096 G1 X-40.414 Y-1.782 E.00528 G1 X-41.098 Y-1.192 E.02997 G2 X-40.332 Y.156 I2.53 J-.547 E.05225 G1 X-39.631 Y.54 E.02649 G1 X-40.252 Y1.037 E.02637 G3 X-39.828 Y1.498 I-.875 J1.23 E.02093 G3 X-40.268 Y3.136 I-1.859 J.379 E.05832 G1 X-40.423 Y3.264 E.00667 G1 X-40.374 Y3.352 E.00334 G1 X-41.101 Y3.961 E.03144 G2 X-39.733 Y5.746 I2.345 J-.379 E.07772 G1 X-40.323 Y6.22 E.02509 G3 X-39.828 Y6.739 I-.976 J1.425 E.02395 G3 X-40.268 Y8.377 I-1.859 J.379 E.05832 G1 X-41.067 Y9.035 E.03432 G1 X-41.063 Y9.471 E.01448 G2 X-39.834 Y10.952 I2.826 J-1.094 E.06497 G1 X-40.393 Y11.404 E.02383 G3 X-39.828 Y11.981 I-1.078 J1.62 E.02698 G3 X-40.268 Y13.619 I-1.859 J.379 E.05832 G1 X-41.029 Y14.245 E.0327 G1 X-40.996 Y13.974 E.00905 G1 X-41.605 Y13.782 E.0212 G2 X-41.719 Y13.088 I-.897 J-.21 E.02393 G1 X-40.123 Y16.296 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X-42.68 Y17.715 E.14978 G1 X-43.608 Y17.715 E.04748 G1 X-40.683 Y16.092 E.17129 G3 X-40.998 Y15.752 I.793 J-1.054 E.02386 G1 X-44.535 Y17.715 E.2071 G1 X-45.462 Y17.715 E.04748 G1 X-41.238 Y15.371 E.24734 G3 X-41.42 Y14.957 I1.61 J-.952 E.0232 G1 X-46.389 Y17.715 E.29102 G1 X-47.317 Y17.715 E.04748 G1 X-41.49 Y14.482 E.34118 G1 X-41.465 Y14.275 E.01064 G1 X-41.836 Y14.158 E.0199 G1 X-47.877 Y17.512 E.35379 G1 X-48.515 Y17.512 E.03267 G1 X-48.515 Y17.351 E.00822 G1 X-42.034 Y13.754 E.37955 G1 X-42.032 Y13.457 E.0152 G1 X-42.104 Y13.278 E.00988 G1 X-48.515 Y16.837 E.37544 G1 X-48.515 Y16.322 E.02635 G1 X-42.307 Y12.876 E.36358 G1 X-42.497 Y12.552 E.01921 G1 X-42.158 Y12.279 E.02231 G1 X-48.515 Y15.807 E.37229 G1 X-48.515 Y15.293 E.02635 G1 X-40.621 Y10.911 E.46225 G1 X-40.726 Y10.836 E.00659 G1 X-40.944 Y10.576 E.01738 G1 X-48.515 Y14.778 E.44336 G1 X-48.515 Y14.263 E.02635 G1 X-41.198 Y10.202 E.42852 G3 X-41.394 Y9.796 I1.218 J-.84 E.02317 G1 X-48.515 Y13.749 E.41701 G1 X-48.515 Y13.234 E.02635 G1 X-41.493 Y9.336 E.41123 G1 X-41.494 Y9.165 E.00878 G1 X-41.888 Y9.041 E.02112 G1 X-48.515 Y12.719 E.38811 G1 X-48.515 Y12.205 E.02635 G1 X-42.064 Y8.624 E.37781 G1 X-42.018 Y8.282 E.01764 G1 X-42.079 Y8.117 E.009 G1 X-48.515 Y11.69 E.37693 G1 X-48.515 Y11.175 E.02635 G1 X-42.262 Y7.704 E.36619 G1 X-42.434 Y7.368 E.01933 G1 X-42.101 Y7.1 E.02191 G1 X-48.515 Y10.661 E.37563 G1 X-48.515 Y10.146 E.02635 G1 X-40.561 Y5.731 E.46578 G1 X-40.667 Y5.665 E.00639 G1 X-40.89 Y5.399 E.01776 G1 X-48.515 Y9.631 E.44653 G1 X-48.515 Y9.117 E.02635 G1 X-41.158 Y5.033 E.43086 G3 X-41.363 Y4.632 I.833 J-.68 E.02322 G1 X-48.515 Y8.602 E.41884 G1 X-48.515 Y8.087 E.02635 G1 X-41.494 Y4.19 E.41119 G1 X-41.568 Y3.793 E.02065 G1 X-41.296 Y3.566 E.01815 G1 X-48.515 Y7.573 E.42274 G1 X-48.515 Y7.058 E.02635 G1 X-41.871 Y3.37 E.38906 G1 X-41.913 Y3.384 E.00222 G1 X-42.054 Y2.957 E.02302 G1 X-48.515 Y6.543 E.37836 G1 X-48.515 Y6.029 E.02635 G1 X-42.218 Y2.533 E.36876 G1 X-42.372 Y2.184 E.01952 G1 X-42.044 Y1.922 E.02153 G1 X-48.515 Y5.514 E.37898 G1 X-48.515 Y4.999 E.02635 G1 X-40.502 Y.551 E.46925 G1 X-40.608 Y.493 E.0062 G1 X-40.836 Y.222 E.01812 G1 X-48.515 Y4.485 E.44971 G1 X-48.515 Y3.97 E.02635 G1 X-47.191 Y3.235 E.07756 G3 X-47.848 Y3.085 I.428 J-3.379 E.03454 G1 X-48.515 Y3.455 E.03911 G1 X-48.515 Y2.941 E.02635 G1 X-48.153 Y2.739 E.02124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.174 Y1.56 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-41.118 Y-.136 E.17893 G3 X-41.332 Y-.532 I.613 J-.586 E.02332 G1 X-43.628 Y.743 E.13449 G2 X-43.548 Y.183 I-3.238 J-.75 E.02896 G1 X-41.479 Y-.965 E.12112 G1 X-41.585 Y-1.338 E.01988 G1 X-41.317 Y-1.57 E.01814 G1 X-43.556 Y-.327 E.13111 G2 X-43.641 Y-.794 I-2.415 J.2 E.02436 G1 X-41.842 Y-1.793 E.10538 G1 X-41.904 Y-1.774 E.00333 G1 X-42.03 Y-2.203 E.02291 G1 X-43.781 Y-1.231 E.10253 G2 X-43.982 Y-1.634 I-4.088 J1.787 E.02307 G1 X-42.18 Y-2.634 E.10551 G1 X-42.35 Y-3.055 E.02321 G1 X-44.235 Y-2.009 E.11035 G2 X-44.544 Y-2.352 I-2.985 J2.387 E.02367 G1 X-40.286 Y-4.715 E.24939 G1 X-41.213 Y-4.715 E.04748 G1 X-44.918 Y-2.659 E.21694 G2 X-45.366 Y-2.925 I-1.976 J2.823 E.02671 G1 X-42.14 Y-4.715 E.1889 G1 X-43.067 Y-4.715 E.04748 G1 X-45.913 Y-3.136 E.16666 G2 X-46.63 Y-3.253 I-.898 J3.244 E.03724 G1 X-43.995 Y-4.715 E.15431 G1 X-44.922 Y-4.715 E.04748 G1 X-47.882 Y-3.072 E.17337 G2 X-48.515 Y-2.769 I1.095 J3.102 E.036 G1 X-48.515 Y-3.235 E.02387 G1 X-45.849 Y-4.715 E.15614 G1 X-46.776 Y-4.715 E.04748 G1 X-48.515 Y-3.75 E.10184 G1 X-48.515 Y-4.265 E.02635 G1 X-47.339 Y-4.918 E.06891 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.135 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409515 ;HEIGHT:0.2 G1 F12000 M106 S255 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385477 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342223 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305489 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275113 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276404 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307218 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344555 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.39396 G2 X-49.135 Y1.264 I8.183 J-1.359 E.0117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.211 Y.863 ;WIPE_END G1 X-42.51 Y-2.79 Z2.6 F30000 G1 X-36.932 Y-5.83 Z2.6 G1 Z2.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-36.897 Y-6.329 E.01658 G1 X-37.537 Y-6.531 E.02227 G2 X-38.781 Y-4.726 I.779 J1.868 E.07683 G1 X-38.706 Y-4.398 E.01115 G2 X-37.647 Y-3.416 I2.846 J-2.004 E.04827 G1 X-37.374 Y-2.969 E.01736 G1 X-37.81 Y-2.727 E.01654 G3 X-37.415 Y-1.518 I-2.792 J1.582 E.04248 G1 X-38.266 Y-.795 E.03706 G2 X-38.781 Y.515 I1.394 J1.304 E.04783 G1 X-38.706 Y.843 E.01115 G2 X-37.647 Y1.826 I2.846 J-2.004 E.04827 G1 X-37.417 Y2.202 E.01462 G1 X-37.841 Y2.437 E.01608 G3 X-37.391 Y3.693 I-5.497 J2.681 E.04436 G1 X-38.266 Y4.446 E.03832 G2 X-38.781 Y5.757 I1.394 J1.304 E.04783 G1 X-38.706 Y6.084 E.01115 G2 X-37.647 Y7.067 I2.846 J-2.004 E.04827 G1 X-37.239 Y7.764 E.02679 G1 X-37.675 Y8.006 E.01656 G1 X-37.383 Y8.925 E.03197 G1 X-38.266 Y9.688 E.03872 G2 X-38.781 Y10.998 I1.394 J1.304 E.04783 G1 X-38.706 Y11.326 E.01115 G2 X-37.647 Y12.308 I2.846 J-2.004 E.04827 G1 X-37.268 Y12.927 E.02407 G1 X-37.719 Y13.177 E.01708 G1 X-37.476 Y13.858 E.024 G1 X-38.036 Y14.384 E.0255 G1 X-37.9 Y14.628 E.00926 G2 X-38.781 Y16.239 I1.343 J1.781 E.06279 G1 X-38.706 Y16.567 E.01115 G2 X-37.861 Y17.374 I2.324 J-1.587 E.03902 G1 X-39.601 Y18.339 E.06599 G1 X-39.69 Y18.178 E.0061 G1 X-39.885 Y18.235 E.00675 G1 X-39.753 Y17.55 E.02316 G2 X-40.15 Y16.845 I-1.213 J.219 E.02734 G1 X-42.516 Y18.158 E.08977 G1 X-42.376 Y18.85 E.02342 G1 X-41.767 Y18.512 E.0231 G1 X-41.638 Y18.744 E.00883 G1 X-40.998 Y18.559 E.02208 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-16.313 Y51.685 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-17.737 Y52.475 E.05401 G1 X-17.815 Y52.928 E.01527 G2 X-17.141 Y53.861 I1.384 J-.29 E.03931 G1 X-16.563 Y53.711 E.01981 G1 X-16.035 Y54.153 E.02284 G1 X-15.735 Y53.986 E.01137 G1 X27.7 Y52.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y37.744 E.57795 G1 X27.7 Y32.256 F30000 G1 F12000 G1 X27.7 Y17.744 E.57795 G1 X28.535 Y1.264 F30000 ;WIDTH:0.409521 G1 F12000 G1 X28.591 Y.981 E.00864 ;WIDTH:0.38548 G1 X28.611 Y.863 E.00334 ;WIDTH:0.342224 G1 X28.634 Y.731 E.00326 ;WIDTH:0.305489 G1 X28.648 Y.613 E.00254 ;WIDTH:0.275113 G1 X28.664 Y.485 E.00245 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00748 G1 X28.663 Y-.495 E.00752 ;WIDTH:0.276406 G1 X28.648 Y-.613 E.00226 ;WIDTH:0.30722 G1 X28.632 Y-.745 E.00286 ;WIDTH:0.344557 G1 X28.611 Y-.863 E.00294 ;WIDTH:0.393961 G2 X28.535 Y-1.264 I-8.168 J1.357 E.0117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.611 Y-.863 ;WIPE_END G1 X22.082 Y-4.815 Z2.6 F30000 G1 X18.937 Y-6.719 Z2.6 G1 Z2.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X18.937 Y-5.091 E.05401 G2 X19.21 Y-4.071 I.889 J.308 E.03718 G1 X19.855 Y-3.541 E.02769 G1 X19.374 Y-3.15 E.02057 G3 X20.17 Y-1.921 I-2.348 J2.396 E.04896 G1 X20.206 Y-1.571 E.0117 G1 X19.47 Y-.958 E.03178 G1 X19.506 Y-.892 E.0025 G1 X19.388 Y-.795 E.00507 G2 X18.948 Y.843 I1.419 J1.259 E.05832 G2 X19.787 Y1.644 I2.309 J-1.575 E.03875 G1 X19.32 Y2.028 E.02003 G3 X20.228 Y3.57 I-2.432 J2.47 E.06003 G1 X19.521 Y4.171 E.03079 G1 X19.584 Y4.285 E.00435 G1 X19.388 Y4.446 E.00841 G2 X18.948 Y6.084 I1.419 J1.259 E.05832 G2 X19.718 Y6.83 I2.142 J-1.442 E.03581 G1 X19.245 Y7.218 E.02029 G3 X20.208 Y8.732 I-1.72 J2.156 E.06062 G1 X19.551 Y9.309 E.02901 G1 X19.644 Y9.477 E.00636 G1 X19.388 Y9.688 E.01099 G2 X18.948 Y11.326 I1.419 J1.259 E.05832 G2 X19.648 Y12.013 I1.97 J-1.305 E.03276 G1 X19.146 Y12.422 E.02149 G3 X20.188 Y13.894 I-1.764 J2.354 E.0608 G1 X19.594 Y14.439 E.02672 G1 X19.717 Y14.659 E.00835 G1 X19.388 Y14.929 E.01411 G2 X18.948 Y16.567 I1.419 J1.259 E.05832 G2 X19.844 Y17.416 I2.449 J-1.687 E.04123 G3 X17.806 Y18.098 I-15.796 J-43.815 E.0713 G2 X17.565 Y16.894 I-.95 J-.435 E.04351 G1 X16.768 Y16.239 E.03423 G1 X16.578 Y15.929 E.01205 G1 X16.996 Y15.697 E.01586 G3 X16.575 Y14.606 I6.188 J-3.014 E.03887 G1 X17.211 Y14.037 E.02831 G1 X17.107 Y13.848 E.00714 G1 X17.386 Y13.619 E.01201 G2 X17.826 Y11.981 I-1.419 J-1.259 E.05832 G2 X16.768 Y10.998 I-2.846 J2.004 E.04827 G1 X16.536 Y10.619 E.01473 G1 X16.96 Y10.279 E.01805 G3 X16.595 Y9.443 I3.638 J-2.088 E.03032 G1 X17.16 Y8.914 E.02567 G1 X17.026 Y8.674 E.00913 G1 X17.386 Y8.377 E.01549 G2 X17.826 Y6.739 I-1.419 J-1.259 E.05832 G2 X16.768 Y5.757 I-2.846 J2.004 E.04827 G1 X16.581 Y5.451 E.01188 G1 X17.022 Y5.095 E.0188 G3 X16.609 Y3.775 I1.353 J-1.148 E.04714 G1 X17.386 Y3.136 E.03338 G2 X17.826 Y1.498 I-1.419 J-1.259 E.05832 G2 X16.768 Y.515 I-2.846 J2.004 E.04827 G1 X16.625 Y.283 E.00903 G1 X17.084 Y-.088 E.01957 G3 X16.589 Y-1.45 I1.499 J-1.315 E.04919 G1 X17.386 Y-2.105 E.03423 G2 X17.826 Y-3.743 I-1.419 J-1.259 E.05832 G2 X16.768 Y-4.726 I-2.846 J2.004 E.04827 G1 X16.516 Y-5.137 E.01601 G1 X15.092 Y-4.347 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X16.516 Y-5.137 G1 X16.71 Y-4.82 ;WIPE_END G1 X9.173 Y-3.618 Z2.6 F30000 G1 X-29.182 Y2.503 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X-29.967 Y2.939 E.04595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.153 Y-22.843 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-38.769 Y-23.056 E.02248 G3 X-38.623 Y-23.242 I.881 J.54 E.01216 G1 X-38.623 Y-23.652 E.02095 G1 X-39.344 Y-23.251 E.04225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.718 Y-40.543 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-38.755 Y-41.077 E.0564 G3 X-38.623 Y-41.242 I.801 J.504 E.01084 G1 X-38.623 Y-41.665 E.02164 G1 X-39.718 Y-41.057 E.06411 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-38.623 Y-41.665 G1 X-38.623 Y-41.242 G1 X-38.755 Y-41.077 G1 X-38.854 Y-41.022 ;WIPE_END G1 X-31.318 Y-42.229 Z2.6 F30000 G1 X30.216 Y-52.082 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X30.915 Y-52.47 E.04096 G1 X30.915 Y-52.985 E.02635 G1 X29.654 Y-52.285 E.07389 G1 X28.726 Y-52.285 E.04748 G1 X30.915 Y-53.5 E.12819 G1 X30.915 Y-54.014 E.02635 G1 X27.799 Y-52.285 E.18249 G1 X26.872 Y-52.285 E.04748 G1 X30.915 Y-54.529 E.23679 G1 X30.915 Y-55.044 E.02635 G1 X25.945 Y-52.285 E.29109 G1 X25.017 Y-52.285 E.04748 G1 X30.915 Y-55.558 E.34538 G1 X30.915 Y-56.073 E.02635 G1 X24.09 Y-52.285 E.39968 G1 X23.163 Y-52.285 E.04748 G1 X30.915 Y-56.588 E.45398 G1 X30.915 Y-57.102 E.02635 G1 X22.236 Y-52.285 E.50828 G1 X21.308 Y-52.285 E.04748 G1 X30.915 Y-57.617 E.56258 G1 X30.915 Y-58.132 E.02635 G1 X20.016 Y-52.082 E.63824 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X21.765 Y-53.053 ;WIPE_END G1 X22.727 Y-45.481 Z2.6 F30000 G1 X28.118 Y-3.053 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X27.767 Y-2.858 E.02055 G2 X27.247 Y-3.085 I-1.797 J3.416 E.02904 G1 X27.915 Y-3.455 E.03912 G1 X27.915 Y-3.97 E.02635 G1 X26.267 Y-3.055 E.09653 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X27.915 Y-3.97 G1 X27.915 Y-3.855 ;WIPE_END G1 X27.989 Y3.777 Z2.6 F30000 G1 X28.118 Y17.019 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X26.863 Y17.715 E.07347 G1 X25.936 Y17.715 E.04748 G1 X27.915 Y16.617 E.11591 G1 X27.915 Y16.102 E.02635 G1 X25.009 Y17.715 E.17021 G1 X24.082 Y17.715 E.04748 G1 X27.915 Y15.587 E.2245 G1 X27.915 Y15.073 E.02635 G1 X22.789 Y17.918 E.30017 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X24.538 Y16.947 ;WIPE_END G1 X25.874 Y24.462 Z2.6 F30000 M73 P33 R53 G1 X28.118 Y37.091 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X26.993 Y37.715 E.06585 G1 X26.066 Y37.715 E.04748 G1 X27.915 Y36.689 E.10829 G1 X27.915 Y36.174 E.02635 G1 X25.139 Y37.715 E.16259 G1 X24.212 Y37.715 E.04748 G1 X27.915 Y35.66 E.21689 G1 X27.915 Y35.145 E.02635 G1 X22.92 Y37.918 E.29255 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X24.668 Y36.947 ;WIPE_END G1 X25.395 Y44.545 Z2.6 F30000 G1 X26.864 Y59.918 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X27.915 Y59.334 E.06155 G1 X27.915 Y58.82 E.02635 G1 X26.853 Y59.41 E.06224 G2 X26.879 Y58.88 I-3.042 J-.42 E.02718 G1 X27.915 Y58.305 E.06066 G1 X27.915 Y57.79 E.02635 G1 X26.815 Y58.401 E.06444 G2 X26.678 Y57.962 I-4.115 J1.042 E.02354 G1 X27.915 Y57.276 E.07244 G1 X27.915 Y56.761 E.02635 G1 X26.467 Y57.565 E.08485 G2 X26.191 Y57.203 I-1.512 J.864 E.02335 G1 X27.915 Y56.246 E.10097 G1 X27.915 Y55.732 E.02635 G1 X25.849 Y56.879 E.12103 G2 X25.411 Y56.607 I-2.124 J2.932 E.0264 G1 X27.915 Y55.217 E.14666 G1 X27.915 Y54.702 E.02635 G1 X24.588 Y56.549 E.19486 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.727 Y59.167 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X20.738 Y59.715 E.05787 G1 X19.811 Y59.715 E.04748 G1 X21.528 Y58.762 E.10055 G3 X21.646 Y58.183 I2.767 J.258 E.03035 G1 X18.884 Y59.715 E.16172 G1 X17.957 Y59.715 E.04748 G1 X21.994 Y57.474 E.23644 G3 X24.072 Y56.321 I2.179 J1.478 E.12623 G1 X27.915 Y54.188 E.22506 G1 X27.915 Y53.673 E.02635 G1 X17.029 Y59.715 E.63747 G1 X16.102 Y59.715 E.04748 G1 X27.915 Y53.158 E.69177 G1 X27.915 Y52.644 E.02635 G1 X15.175 Y59.715 E.74606 G1 X14.248 Y59.715 E.04748 G1 X27.269 Y52.488 E.76249 G1 X27.202 Y52.488 E.00343 G1 X27.202 Y52.285 E.01042 G1 X26.708 Y52.285 E.02527 G1 X13.32 Y59.715 E.78396 G1 X12.393 Y59.715 E.04748 G1 X25.781 Y52.285 E.78396 G1 X24.854 Y52.285 E.04748 G1 X11.466 Y59.715 E.78396 G1 X10.539 Y59.715 E.04748 G1 X23.926 Y52.285 E.78396 G1 X22.999 Y52.285 E.04748 G1 X9.611 Y59.715 E.78396 G1 X8.684 Y59.715 E.04748 G1 X22.072 Y52.285 E.78396 G1 X21.915 Y52.285 E.00801 G1 X21.915 Y51.857 E.02191 G1 X7.757 Y59.715 E.8291 G1 X6.83 Y59.715 E.04748 G1 X21.915 Y51.342 E.8834 G1 X21.915 Y50.827 E.02635 G1 X5.902 Y59.715 E.9377 G1 X4.975 Y59.715 E.04748 G1 X21.915 Y50.313 E.99199 G1 X21.915 Y49.798 E.02635 G1 X4.048 Y59.715 E1.04629 G1 X3.121 Y59.715 E.04748 G1 X21.915 Y49.283 E1.10059 G1 X21.915 Y48.769 E.02635 G1 X2.193 Y59.715 E1.15489 G1 X1.266 Y59.715 E.04748 G1 X21.915 Y48.254 E1.20919 G1 X21.915 Y47.739 E.02635 G1 X.339 Y59.715 E1.26348 G1 X-.588 Y59.715 E.04748 G1 X21.915 Y47.225 E1.31778 G1 X21.915 Y46.71 E.02635 G1 X-1.516 Y59.715 E1.37208 G1 X-2.443 Y59.715 E.04748 G1 X21.915 Y46.195 E1.42638 G1 X21.915 Y45.681 E.02635 G1 X-3.37 Y59.715 E1.48068 G1 X-4.297 Y59.715 E.04748 G1 X21.915 Y45.166 E1.53497 G1 X21.915 Y44.651 E.02635 G1 X-5.225 Y59.715 E1.58927 G1 X-6.152 Y59.715 E.04748 G1 X21.915 Y44.137 E1.64357 G1 X21.915 Y43.622 E.02635 G1 X-7.079 Y59.715 E1.69787 G1 X-8.006 Y59.715 E.04748 G1 X21.915 Y43.107 E1.75217 G1 X21.915 Y42.593 E.02635 G1 X-8.934 Y59.715 E1.80646 G1 X-9.861 Y59.715 E.04748 G1 X21.915 Y42.078 E1.86076 G1 X21.915 Y41.563 E.02635 G1 X-10.788 Y59.715 E1.91506 G1 X-11.715 Y59.715 E.04748 G1 X21.915 Y41.049 E1.96936 G1 X21.915 Y40.534 E.02635 G1 X-12.643 Y59.715 E2.02366 G1 X-13.57 Y59.715 E.04748 G1 X21.915 Y40.019 E2.07796 G1 X21.915 Y39.505 E.02635 G1 X-14.497 Y59.715 E2.13225 G1 X-15.424 Y59.715 E.04748 G1 X21.915 Y38.99 E2.18655 G1 X21.915 Y38.475 E.02635 G1 X4.985 Y47.873 E.99144 G1 X4.985 Y48.285 E.02109 G1 X4.243 Y48.285 E.03799 G1 X-16.352 Y59.715 E1.20596 G1 X-17.279 Y59.715 E.04748 G1 X3.315 Y48.285 E1.20596 G1 X2.388 Y48.285 E.04748 G1 X-18.206 Y59.715 E1.20596 G1 X-19.133 Y59.715 E.04748 G1 X1.461 Y48.285 E1.20596 G1 X.534 Y48.285 E.04748 G1 X-20.061 Y59.715 E1.20596 G1 X-20.988 Y59.715 E.04748 G1 X-.394 Y48.285 E1.20596 G1 X-1.321 Y48.285 E.04748 G1 X-21.915 Y59.715 E1.20596 G1 X-22.842 Y59.715 E.04748 G1 X-2.248 Y48.285 E1.20596 G1 X-3.175 Y48.285 E.04748 G1 X-23.77 Y59.715 E1.20596 G1 X-24.697 Y59.715 E.04748 G1 X-4.103 Y48.285 E1.20596 G1 X-5.03 Y48.285 E.04748 G1 X-14.138 Y53.34 E.53334 G1 X-13.929 Y53.473 E.01271 G1 X-16.084 Y54.67 E.12623 G1 X-16.264 Y54.52 E.01198 G1 X-25.624 Y59.715 E.54813 G1 X-26.551 Y59.715 E.04748 G1 X-16.634 Y54.211 E.58075 G1 X-16.669 Y54.181 E.00235 G1 X-18.244 Y54.59 E.08333 G1 X-27.479 Y59.715 E.54074 G1 X-28.406 Y59.715 E.04748 G1 X-18.545 Y54.242 E.57744 G1 X-18.399 Y53.779 E.02484 G1 X-18.449 Y53.674 E.00594 G1 X-29.333 Y59.715 E.63736 G1 X-30.26 Y59.715 E.04748 G1 X-18.602 Y53.244 E.68272 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.771 Y53.176 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-5.957 Y48.285 E.51609 G1 X-6.884 Y48.285 E.04748 G1 X-14.958 Y52.766 E.47275 G3 X-15.234 Y52.404 I1.521 J-1.452 E.02334 G1 X-7.812 Y48.285 E.43465 G1 X-8.739 Y48.285 E.04748 G1 X-15.445 Y52.007 E.39271 G3 X-15.561 Y51.557 I.969 J-.489 E.02399 G1 X-9.666 Y48.285 E.3452 G1 X-10.593 Y48.285 E.04748 G1 X-15.641 Y51.086 E.29558 G1 X-15.682 Y50.844 E.01257 M73 P34 R53 G1 X-19.521 Y52.975 E.22482 G1 X-19.28 Y53.106 E.01406 G1 X-31.188 Y59.715 E.69728 G1 X-32.115 Y59.715 E.04748 G1 X-11.521 Y48.285 E1.20596 G1 X-12.448 Y48.285 E.04748 G1 X-33.042 Y59.715 E1.20596 G1 X-33.969 Y59.715 E.04748 G1 X-13.375 Y48.285 E1.20596 G1 X-14.302 Y48.285 E.04748 G1 X-34.897 Y59.715 E1.20596 G1 X-35.824 Y59.715 E.04748 G1 X-15.23 Y48.285 E1.20596 G1 X-16.157 Y48.285 E.04748 G1 X-36.751 Y59.715 E1.20596 G1 X-37.678 Y59.715 E.04748 G1 X-17.084 Y48.285 E1.20596 G1 X-18.011 Y48.285 E.04748 G1 X-38.606 Y59.715 E1.20596 G1 X-39.533 Y59.715 E.04748 G1 X-18.939 Y48.285 E1.20596 G1 X-19.866 Y48.285 E.04748 G1 X-40.46 Y59.715 E1.20596 G1 X-41.387 Y59.715 E.04748 G1 X-20.793 Y48.285 E1.20596 G1 X-21.72 Y48.285 E.04748 G1 X-42.195 Y59.649 E1.19895 G2 X-42.119 Y59.092 I-2.077 J-.568 E.02887 G1 X-22.648 Y48.285 E1.14019 G1 X-23.575 Y48.285 E.04748 G1 X-42.147 Y58.593 E1.08754 G2 X-42.26 Y58.141 I-1.773 J.203 E.02392 G1 X-24.502 Y48.285 E1.03985 G1 X-25.429 Y48.285 E.04748 G1 X-42.439 Y57.726 E.99602 G2 X-42.683 Y57.347 I-3.555 J2.028 E.0231 G1 X-25.585 Y47.856 E1.00127 G1 X-25.585 Y47.341 E.02635 G1 X-43.003 Y57.009 E1.01998 G2 X-43.396 Y56.713 I-1.322 J1.345 E.02528 G1 X-25.585 Y46.827 E1.04301 G1 X-25.585 Y46.312 E.02635 G1 X-43.895 Y56.475 E1.07223 G2 X-44.558 Y56.329 I-.925 J2.608 E.03485 G1 X-25.382 Y45.685 E1.1229 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-27.131 Y46.656 ;WIPE_END G1 X-33.583 Y50.732 Z2.6 F30000 G1 X-47.254 Y59.369 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-47.878 Y59.715 E.03654 G1 X-48.515 Y59.715 E.03263 G1 X-48.515 Y59.554 E.00824 G1 X-47.486 Y58.983 E.06027 G3 X-47.421 Y58.432 I2.124 J-.029 E.02848 G1 X-48.515 Y59.04 E.06407 G1 X-48.515 Y58.525 E.02635 G1 X-46.845 Y57.598 E.09784 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.718 Y58.123 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-25.585 Y45.283 E1.35465 G1 X-25.585 Y44.768 E.02635 G1 X-48.515 Y57.496 E1.34279 G1 X-48.515 Y56.981 E.02635 G1 X-25.585 Y44.253 E1.34279 G1 X-25.585 Y43.739 E.02635 G1 X-48.515 Y56.466 E1.34279 G1 X-48.515 Y55.952 E.02635 G1 X-25.585 Y43.224 E1.34279 G1 X-25.585 Y42.709 E.02635 G1 X-48.515 Y55.437 E1.34279 G1 X-48.515 Y54.922 E.02635 G1 X-43.763 Y52.285 E.27829 G1 X-44.69 Y52.285 E.04748 G1 X-48.515 Y54.408 E.224 G1 X-48.515 Y53.893 E.02635 G1 X-45.617 Y52.285 E.1697 G1 X-46.545 Y52.285 E.04748 G1 X-48.515 Y53.378 E.1154 G1 X-48.515 Y52.864 E.02635 G1 X-47.107 Y52.082 E.08247 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.718 Y51.705 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-25.585 Y42.195 E1.0033 G1 X-25.585 Y41.68 E.02635 G1 X-42.515 Y51.077 E.99144 G1 X-42.515 Y50.563 E.02635 G1 X-25.585 Y41.165 E.99144 G1 X-25.585 Y40.651 E.02635 G1 X-42.515 Y50.048 E.99144 G1 X-42.515 Y49.533 E.02635 G1 X-25.585 Y40.136 E.99144 G1 X-25.585 Y39.621 E.02635 G1 X-42.515 Y49.019 E.99144 G1 X-42.515 Y48.504 E.02635 G1 X-25.585 Y39.107 E.99144 G1 X-25.585 Y38.592 E.02635 G1 X-42.718 Y48.102 E1.0033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.782 Y47.47 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X27.915 Y34.63 E1.35465 G1 X27.915 Y34.116 E.02635 G1 X4.985 Y46.843 E1.34279 G1 X4.985 Y46.329 E.02635 G1 X27.915 Y33.601 E1.34279 G1 X27.915 Y33.086 E.02635 G1 X4.985 Y45.814 E1.34279 G1 X4.985 Y45.299 E.02635 G1 X27.915 Y32.572 E1.34279 G1 X27.915 Y32.488 E.00427 G1 X27.202 Y32.488 E.03655 G1 X27.202 Y32.453 E.00179 G1 X4.985 Y44.785 E1.30099 G1 X4.985 Y44.27 E.02635 G1 X26.578 Y32.285 E1.26447 G1 X25.651 Y32.285 E.04748 G1 X4.985 Y43.755 E1.21017 G1 X4.985 Y43.241 E.02635 G1 X24.723 Y32.285 E1.15587 G1 X23.796 Y32.285 E.04748 G1 X4.985 Y42.726 E1.10158 G1 X4.985 Y42.211 E.02635 G1 X22.869 Y32.285 E1.04728 G1 X21.942 Y32.285 E.04748 G1 X4.985 Y41.697 E.99298 G1 X4.985 Y41.182 E.02635 G1 X21.915 Y31.785 E.99144 G1 X21.915 Y31.27 E.02635 G1 X4.985 Y40.667 E.99144 G1 X4.985 Y40.153 E.02635 G1 X21.915 Y30.755 E.99144 G1 X21.915 Y30.241 E.02635 G1 X4.985 Y39.638 E.99144 G1 X4.985 Y39.123 E.02635 G1 X21.915 Y29.726 E.99144 G1 X21.915 Y29.211 E.02635 G1 X4.985 Y38.609 E.99144 G1 X4.985 Y38.094 E.02635 G1 X21.915 Y28.696 E.99144 G1 X21.915 Y28.182 E.02635 G1 X4.739 Y37.715 E1.0058 G1 X3.812 Y37.715 E.04748 G1 X21.915 Y27.667 E1.0601 G1 X21.915 Y27.152 E.02635 G1 X2.885 Y37.715 E1.1144 G1 X1.958 Y37.715 E.04748 G1 X21.915 Y26.638 E1.16869 G1 X21.915 Y26.123 E.02635 M73 P34 R52 G1 X1.03 Y37.715 E1.22299 G1 X.103 Y37.715 E.04748 G1 X21.915 Y25.608 E1.27729 G1 X21.915 Y25.094 E.02635 G1 X-.824 Y37.715 E1.33159 G1 X-1.751 Y37.715 E.04748 G1 X21.915 Y24.579 E1.38589 G1 X21.915 Y24.064 E.02635 G1 X4.985 Y33.462 E.99144 G1 X4.985 Y32.947 E.02635 G1 X21.915 Y23.55 E.99144 G1 X21.915 Y23.035 E.02635 G1 X4.985 Y32.433 E.99144 G1 X4.985 Y31.918 E.02635 G1 X21.915 Y22.52 E.99144 G1 X21.915 Y22.006 E.02635 G1 X4.985 Y31.403 E.99144 G1 X4.985 Y30.889 E.02635 G1 X21.915 Y21.491 E.99144 G1 X21.915 Y20.976 E.02635 G1 X4.985 Y30.374 E.99144 G1 X4.985 Y29.859 E.02635 G1 X21.915 Y20.462 E.99144 G1 X21.915 Y19.947 E.02635 G1 X4.985 Y29.345 E.99144 G1 X4.985 Y28.83 E.02635 G1 X21.915 Y19.432 E.99144 G1 X21.915 Y18.918 E.02635 G1 X4.985 Y28.315 E.99144 G1 X4.985 Y27.801 E.02635 G1 X22.118 Y18.291 E1.0033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.118 Y14.446 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X4.985 Y27.286 E1.35465 G1 X4.985 Y26.771 E.02635 G1 X27.915 Y14.043 E1.34279 G1 X27.915 Y13.529 E.02635 G1 X4.985 Y26.257 E1.34279 G1 X4.985 Y25.742 E.02635 G1 X18.135 Y18.443 E.77006 G1 X16.021 Y19.101 E.11337 G1 X4.985 Y25.227 E.64627 G1 X4.985 Y24.713 E.02635 G1 X15.636 Y18.801 E.62371 G2 X15.489 Y18.367 I-2.337 J.55 E.02345 G1 X4.985 Y24.198 E.61511 G1 X4.985 Y23.715 E.0247 G1 X4.926 Y23.715 E.00297 G1 X15.261 Y17.979 E.60519 G2 X14.964 Y17.629 I-3.769 J2.902 E.02351 G1 X3.999 Y23.715 E.64209 G1 X3.072 Y23.715 E.04748 G1 X14.548 Y17.346 E.672 G1 X14.079 Y17.091 E.02731 G1 X2.145 Y23.715 E.69885 G1 X1.217 Y23.715 E.04748 G1 X16.37 Y15.305 E.88733 G3 X16.212 Y14.878 I2.42 J-1.144 E.02333 G1 X.29 Y23.715 E.93233 G1 X-.637 Y23.715 E.04748 G1 X16.188 Y14.377 E.98521 G1 X16.671 Y13.945 E.03317 G1 X16.583 Y13.788 E.00919 G1 X16.034 Y13.947 E.02929 G1 X-1.564 Y23.715 E1.03052 G1 X-2.492 Y23.715 E.04748 G1 X15.658 Y13.641 E1.06281 G2 X15.52 Y13.203 I-1.762 J.315 E.02358 G1 X-3.419 Y23.715 E1.10903 G1 X-4.346 Y23.715 E.04748 G1 X15.305 Y12.808 E1.15075 G2 X15.025 Y12.449 I-2.398 J1.587 E.02335 G1 X-5.273 Y23.715 E1.18861 G1 X-6.201 Y23.715 E.04748 G1 X14.73 Y12.098 E1.22565 G1 X14.439 Y11.752 E.02313 G1 X14.469 Y11.728 E.00196 G1 X-7.128 Y23.715 E1.26468 G1 X-8.055 Y23.715 E.04748 G1 X16.414 Y10.134 E1.43289 G3 X16.237 Y9.717 I1.815 J-1.018 E.02321 G1 X8.785 Y13.854 E.43642 G1 X8.785 Y14.285 E.02205 G1 X8.009 Y14.285 E.03973 G1 X-8.982 Y23.715 E.99496 G1 X-9.91 Y23.715 E.04748 G1 X7.081 Y14.285 E.99496 G1 X6.154 Y14.285 E.04748 G1 X-10.837 Y23.715 E.99496 G1 X-11.764 Y23.715 E.04748 G1 X5.227 Y14.285 E.99496 G1 X4.3 Y14.285 E.04748 G1 X-12.691 Y23.715 E.99496 G1 X-13.619 Y23.715 E.04748 M73 P35 R52 G1 X3.372 Y14.285 E.99496 G1 X2.445 Y14.285 E.04748 G1 X-14.546 Y23.715 E.99496 G1 X-15.473 Y23.715 E.04748 G1 X1.518 Y14.285 E.99496 G1 X.591 Y14.285 E.04748 G1 X-16.4 Y23.715 E.99496 G1 X-17.328 Y23.715 E.04748 G1 X-.337 Y14.285 E.99496 G1 X-1.264 Y14.285 E.04748 G1 X-18.255 Y23.715 E.99496 G1 X-19.182 Y23.715 E.04748 G1 X-2.191 Y14.285 E.99496 G1 X-3.118 Y14.285 E.04748 G1 X-20.109 Y23.715 E.99496 G1 X-21.037 Y23.715 E.04748 G1 X-4.046 Y14.285 E.99496 G1 X-4.585 Y14.285 E.0276 G1 X-4.585 Y14.069 E.01103 G1 X-21.964 Y23.715 E1.01769 G1 X-22.891 Y23.715 E.04748 G1 X-4.585 Y13.554 E1.07199 G1 X-4.585 Y13.04 E.02635 G1 X-24.183 Y23.918 E1.14765 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-22.434 Y22.947 ;WIPE_END G1 X-16.393 Y27.612 Z2.6 F30000 G1 X-3.043 Y37.918 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X3.502 Y34.285 E.38332 G1 X2.575 Y34.285 E.04748 G1 X-3.606 Y37.715 E.36196 G1 X-4.533 Y37.715 E.04748 G1 X1.648 Y34.285 E.36196 G1 X.721 Y34.285 E.04748 G1 X-5.46 Y37.715 E.36196 G1 X-6.388 Y37.715 E.04748 G1 X-.207 Y34.285 E.36196 G1 X-1.134 Y34.285 E.04748 G1 X-7.315 Y37.715 E.36196 G1 X-8.242 Y37.715 E.04748 G1 X-2.061 Y34.285 E.36196 G1 X-2.988 Y34.285 E.04748 G1 X-9.169 Y37.715 E.36196 G1 X-10.097 Y37.715 E.04748 G1 X-3.916 Y34.285 E.36196 G1 X-4.843 Y34.285 E.04748 G1 X-11.024 Y37.715 E.36196 G1 X-11.951 Y37.715 E.04748 G1 X-5.77 Y34.285 E.36196 G1 X-6.697 Y34.285 E.04748 G1 X-12.878 Y37.715 E.36196 G1 X-13.806 Y37.715 E.04748 G1 X-7.625 Y34.285 E.36196 G1 X-8.552 Y34.285 E.04748 G1 X-14.733 Y37.715 E.36196 G1 X-15.66 Y37.715 E.04748 G1 X-9.479 Y34.285 E.36196 G1 X-10.406 Y34.285 E.04748 G1 X-16.587 Y37.715 E.36196 G1 X-17.515 Y37.715 E.04748 G1 X-11.334 Y34.285 E.36196 G1 X-12.261 Y34.285 E.04748 G1 X-18.442 Y37.715 E.36196 G1 X-19.369 Y37.715 E.04748 G1 X-13.188 Y34.285 E.36196 G1 X-14.115 Y34.285 E.04748 G1 X-20.296 Y37.715 E.36196 G1 X-21.224 Y37.715 E.04748 G1 X-15.043 Y34.285 E.36196 G1 X-15.97 Y34.285 E.04748 G1 X-22.151 Y37.715 E.36196 G1 X-23.078 Y37.715 E.04748 G1 X-16.897 Y34.285 E.36196 G1 X-17.824 Y34.285 E.04748 G1 X-24.37 Y37.918 E.38332 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.387 Y34.082 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-24.933 Y37.715 E.38332 G1 X-25.585 Y37.715 E.03338 G1 X-25.585 Y38.077 E.01853 G1 X-42.515 Y47.475 E.99144 G1 X-42.515 Y46.96 E.02635 G1 X-19.679 Y34.285 E1.33727 G1 X-20.606 Y34.285 E.04748 G1 X-42.515 Y46.445 E1.28297 G1 X-42.515 Y45.931 E.02635 G1 X-21.533 Y34.285 E1.22867 G1 X-22.461 Y34.285 E.04748 G1 X-42.515 Y45.416 E1.17438 G1 X-42.515 Y44.901 E.02635 G1 X-23.388 Y34.285 E1.12008 G1 X-24.315 Y34.285 E.04748 G1 X-42.515 Y44.387 E1.06578 G1 X-42.515 Y43.872 E.02635 G1 X-25.242 Y34.285 E1.01148 G1 X-25.585 Y34.285 E.01752 G1 X-25.585 Y33.96 E.01662 G1 X-42.515 Y43.357 E.99144 G1 X-42.515 Y42.843 E.02635 G1 X-25.585 Y33.445 E.99144 G1 X-25.585 Y32.931 E.02635 G1 X-42.515 Y42.328 E.99144 G1 X-42.515 Y41.813 E.02635 G1 X-25.585 Y32.416 E.99144 G1 X-25.585 Y31.901 E.02635 G1 X-42.515 Y41.299 E.99144 G1 X-42.515 Y40.784 E.02635 G1 X-25.585 Y31.387 E.99144 G1 X-25.585 Y30.872 E.02635 G1 X-42.515 Y40.269 E.99144 G1 X-42.515 Y39.755 E.02635 G1 X-25.585 Y30.357 E.99144 G1 X-25.585 Y29.843 E.02635 G1 X-42.515 Y39.24 E.99144 G1 X-42.515 Y38.725 E.02635 G1 X-25.585 Y29.328 E.99144 G1 X-25.585 Y28.813 E.02635 G1 X-42.515 Y38.211 E.99144 G1 X-42.515 Y37.715 E.02536 G1 X-42.55 Y37.715 E.00179 G1 X-25.585 Y28.299 E.99349 G1 X-25.585 Y27.784 E.02635 G1 X-43.478 Y37.715 E1.04779 G1 X-44.405 Y37.715 E.04748 G1 X-25.585 Y27.269 E1.10209 G1 X-25.585 Y26.754 E.02635 G1 X-45.332 Y37.715 E1.15638 G1 X-46.259 Y37.715 E.04748 G1 X-25.585 Y26.24 E1.21068 G1 X-25.585 Y25.725 E.02635 G1 X-47.187 Y37.715 E1.26498 G1 X-47.802 Y37.715 E.03149 G1 X-47.802 Y37.542 E.00887 G1 X-25.585 Y25.21 E1.30099 G1 X-25.585 Y24.696 E.02635 G1 X-48.515 Y37.424 E1.34279 G1 X-48.515 Y36.909 E.02635 G1 X-25.585 Y24.181 E1.34279 G1 X-25.585 Y23.715 E.02384 G1 X-24.746 Y23.715 E.04296 G1 X-4.585 Y12.525 E1.18059 G1 X-4.585 Y12.01 E.02635 G1 X-48.515 Y36.394 E2.57251 G1 X-48.515 Y35.88 E.02635 G1 X-4.585 Y11.496 E2.57251 G1 X-4.585 Y10.981 E.02635 G1 X-48.515 Y35.365 E2.57251 G1 X-48.515 Y34.85 E.02635 G1 X-43.893 Y32.285 E.27068 G1 X-44.82 Y32.285 E.04748 G1 X-48.515 Y34.336 E.21638 G1 X-48.515 Y33.821 E.02635 G1 X-45.748 Y32.285 E.16208 G1 X-46.675 Y32.285 E.04748 G1 X-48.515 Y33.306 E.10778 G1 X-48.515 Y32.792 E.02635 G1 X-47.237 Y32.082 E.07485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.718 Y31.632 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-4.585 Y10.466 E2.23302 G1 X-4.585 Y9.952 E.02635 G1 X-42.515 Y31.005 E2.22116 G1 X-42.515 Y30.491 E.02635 G1 X-4.585 Y9.437 E2.22116 G1 X-4.585 Y8.922 E.02635 G1 X-42.515 Y29.976 E2.22116 G1 X-42.515 Y29.461 E.02635 G1 X-4.585 Y8.408 E2.22116 G1 X-4.585 Y7.893 E.02635 G1 X-42.515 Y28.947 E2.22116 G1 X-42.515 Y28.432 E.02635 G1 X-17.027 Y14.285 E1.49255 G1 X-17.954 Y14.285 E.04748 G1 X-42.515 Y27.917 E1.43825 G1 X-42.515 Y27.403 E.02635 G1 X-18.882 Y14.285 E1.38395 G1 X-19.809 Y14.285 E.04748 G1 X-42.515 Y26.888 E1.32966 G1 X-42.515 Y26.373 E.02635 G1 X-20.736 Y14.285 E1.27536 G1 X-21.663 Y14.285 E.04748 G1 X-42.515 Y25.859 E1.22106 G1 X-42.515 Y25.344 E.02635 G1 X-22.591 Y14.285 E1.16676 G1 X-23.518 Y14.285 E.04748 G1 X-42.515 Y24.829 E1.11246 G1 X-42.515 Y24.315 E.02635 G1 X-24.445 Y14.285 E1.05817 G1 X-25.372 Y14.285 E.04748 G1 X-42.515 Y23.8 E1.00387 G1 X-42.515 Y23.285 E.02635 G1 X-26.3 Y14.285 E.94957 G1 X-27.227 Y14.285 E.04748 G1 X-42.515 Y22.771 E.89527 G1 X-42.515 Y22.256 E.02635 G1 X-28.154 Y14.285 E.84097 G1 X-29.081 Y14.285 E.04748 G1 X-42.515 Y21.741 E.78667 G1 X-42.515 Y21.227 E.02635 G1 X-36.993 Y18.161 E.32338 G1 X-36.85 Y18.332 E.01139 G1 X-34.427 Y16.987 E.14191 G1 X-34.654 Y16.863 E.01325 G1 X-29.385 Y13.938 E.30857 G1 X-29.385 Y13.424 E.02635 G1 X-35.123 Y16.609 E.33602 G3 X-35.578 Y16.347 I.996 J-2.26 E.02695 G1 X-29.385 Y12.909 E.36269 G1 X-29.385 Y12.394 E.02635 G1 X-35.953 Y16.04 E.38465 M73 P35 R51 G3 X-36.224 Y15.676 I1.148 J-1.136 E.02332 G1 X-29.385 Y11.88 E.40051 G1 X-29.385 Y11.365 E.02635 G1 X-36.428 Y15.274 E.41245 G1 X-36.492 Y15.117 E.00869 G1 X-36.512 Y14.806 E.01593 G1 X-29.385 Y10.85 E.41739 G1 X-29.385 Y10.336 E.02635 G1 X-36.805 Y14.454 E.43455 G1 X-37.412 Y14.621 E.03222 G1 X-37.498 Y14.467 E.00901 G1 X-37.125 Y14.117 E.02619 G1 X-29.385 Y9.821 E.45329 G1 X-29.385 Y9.306 E.02635 G1 X-37.114 Y13.596 E.45263 G1 X-37.193 Y13.375 E.01202 G1 X-34.393 Y11.821 E.16394 G1 X-34.609 Y11.692 E.01291 G1 X-29.385 Y8.792 E.30596 G1 X-29.385 Y8.277 E.02635 G1 X-35.055 Y11.424 E.33203 G1 X-35.5 Y11.157 E.0266 G1 X-29.918 Y8.058 E.3269 G3 X-30.802 Y8.034 I-.385 J-2.14 E.04561 G1 X-35.899 Y10.863 E.29847 G3 X-36.18 Y10.505 I2.013 J-1.866 E.02336 G1 X-31.396 Y7.849 E.28014 G3 X-31.852 Y7.588 I.765 J-1.863 E.027 G1 X-36.397 Y10.11 E.26611 G3 X-36.536 Y9.673 I1.586 J-.744 E.02357 G1 X-32.22 Y7.277 E.2527 G3 X-32.508 Y6.922 I1.204 J-1.27 E.02346 G1 X-36.346 Y9.053 E.22477 G1 X-36.564 Y8.659 E.02304 G1 X-32.732 Y6.532 E.22444 G3 X-32.892 Y6.106 I1.536 J-.822 E.02336 G1 X-37.089 Y8.436 E.24575 G1 X-37.161 Y8.211 E.0121 G1 X-34.254 Y6.598 E.17018 G1 X-34.482 Y6.474 E.01325 G1 X-32.972 Y5.636 E.08842 G3 X-32.969 Y5.12 I1.962 J-.247 E.02651 G1 X-34.951 Y6.22 E.11604 G1 X-35.419 Y5.965 E.02731 G1 X-32.56 Y4.378 E.16742 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.021 Y5.784 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-32.462 Y3.809 E.2084 G3 X-30.512 Y2.727 I2.137 J1.552 E.11789 G1 X-29.385 Y2.101 E.06602 G1 X-29.385 Y1.586 E.02635 G1 X-36.135 Y5.333 E.39532 G3 X-36.366 Y4.946 I.537 J-.581 E.02337 G1 X-29.385 Y1.071 E.40879 G1 X-29.385 Y.557 E.02635 G1 X-36.513 Y4.513 E.41742 G1 X-36.525 Y4.472 E.0022 G1 X-36.181 Y4.172 E.02338 G1 X-36.332 Y3.899 E.01599 G1 X-29.385 Y.042 E.40685 G1 X-29.385 Y-.473 E.02635 G1 X-36.551 Y3.505 E.41963 G1 X-36.709 Y3.218 E.01679 G1 X-37.05 Y3.321 E.01822 G1 X-37.063 Y3.275 E.00247 G1 X-29.385 Y-.987 E.44965 G1 X-29.385 Y-1.502 E.02635 G1 X-37.393 Y2.943 E.46893 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.107 Y17.71 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-42.515 Y20.712 E.31668 G1 X-42.515 Y20.197 E.02635 G1 X-39.874 Y18.731 E.1547 G1 X-39.899 Y18.685 E.00267 G1 X-41.621 Y19.186 E.09182 G1 X-42.718 Y19.795 E.06425 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.218 Y13.835 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-4.585 Y7.378 E.68123 G1 X-4.585 Y6.864 E.02635 G1 X-16.015 Y13.208 E.66937 G1 X-16.015 Y12.694 E.02635 G1 X-4.585 Y6.349 E.66937 G1 X-4.585 Y5.834 E.02635 G1 X-16.015 Y12.179 E.66937 G1 X-16.015 Y11.664 E.02635 G1 X-4.585 Y5.32 E.66937 G1 X-4.585 Y4.805 E.02635 G1 X-16.015 Y11.15 E.66937 G1 X-16.015 Y10.635 E.02635 G1 X-4.585 Y4.29 E.66937 G1 X-4.585 Y3.776 E.02635 G1 X-16.015 Y10.12 E.66937 G1 X-16.015 Y9.606 E.02635 G1 X-4.585 Y3.261 E.66937 G1 X-4.585 Y2.746 E.02635 M73 P36 R51 G1 X-16.015 Y9.091 E.66937 G1 X-16.015 Y8.576 E.02635 G1 X-4.585 Y2.232 E.66937 G1 X-4.585 Y1.717 E.02635 G1 X-16.015 Y8.062 E.66937 G1 X-16.015 Y7.547 E.02635 G1 X-4.585 Y1.202 E.66937 G1 X-4.585 Y.688 E.02635 G1 X-16.015 Y7.032 E.66937 G1 X-16.015 Y6.518 E.02635 G1 X-4.585 Y.173 E.66937 G1 X-4.585 Y-.342 E.02635 G1 X-16.015 Y6.003 E.66937 G1 X-16.015 Y5.488 E.02635 G1 X-4.585 Y-.856 E.66937 G1 X-4.585 Y-1.371 E.02635 G1 X-16.218 Y5.086 E.68123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-14.469 Y4.115 ;WIPE_END G1 X-7.395 Y6.981 Z2.6 F30000 G1 X8.582 Y13.452 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X16.205 Y9.22 E.44639 G1 X16.622 Y8.83 E.02924 G1 X16.536 Y8.677 E.00903 G1 X15.984 Y8.829 E.02933 G1 X8.785 Y12.825 E.42156 G1 X8.785 Y12.31 E.02635 G1 X15.636 Y8.507 E.40119 G1 X15.61 Y8.185 E.01652 G1 X15.551 Y8.039 E.00807 G1 X8.785 Y11.795 E.39625 G1 X8.785 Y11.281 E.02635 G1 X15.349 Y7.637 E.38438 G2 X15.079 Y7.272 I-1.457 J.795 E.02331 G1 X8.785 Y10.766 E.36858 G1 X8.785 Y10.251 E.02635 G1 X14.784 Y6.921 E.35132 G1 X14.498 Y6.58 E.02281 G1 X14.556 Y6.533 E.00381 G1 X8.785 Y9.737 E.33794 G1 X8.785 Y9.222 E.02635 G1 X16.458 Y4.963 E.44933 G3 X16.263 Y4.556 I1.424 J-.933 E.02315 G1 X11.853 Y7.004 E.25821 G3 X9.928 Y8.072 I-2.13 J-1.57 E.11627 G1 X8.785 Y8.707 E.06698 G1 X8.785 Y8.193 E.02635 G1 X9.378 Y7.863 E.03474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.118 Y12.902 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X21.943 Y16.329 E.36157 G1 X21.649 Y15.978 E.02347 G1 X27.915 Y12.499 E.36697 G1 X27.915 Y11.985 E.02635 G1 X21.385 Y15.609 E.3824 G1 X21.325 Y15.518 E.00558 G1 X21.196 Y15.2 E.0176 G1 X27.915 Y11.47 E.39347 G1 X27.915 Y10.955 E.02635 G1 X21.112 Y14.732 E.39841 G1 X21.069 Y14.442 E.01498 G1 X20.333 Y14.649 E.03909 G1 X27.915 Y10.441 E.44398 G1 X27.915 Y9.926 E.02635 G1 X20.66 Y13.953 E.42485 G1 X20.513 Y13.52 E.02342 G1 X27.915 Y9.411 E.43345 G1 X27.915 Y8.897 E.02635 G1 X20.334 Y13.105 E.44395 G1 X20.282 Y12.989 E.0065 G1 X20.07 Y12.737 E.01687 G1 X27.915 Y8.382 E.45943 G1 X27.915 Y7.867 E.02635 G1 X20.068 Y12.223 E.45955 G1 X21.737 Y10.861 E.11031 G1 X21.695 Y10.805 E.00359 G1 X27.915 Y7.353 E.36425 G1 X27.915 Y6.838 E.02635 G1 X21.423 Y10.441 E.38016 G1 X21.354 Y10.348 E.00596 G1 X21.227 Y10.036 E.01727 G1 X27.915 Y6.323 E.39164 G1 X27.915 Y5.809 E.02635 G1 X21.097 Y9.593 E.39928 G1 X21.019 Y9.311 E.01497 G1 X20.28 Y9.532 E.03951 G1 X27.915 Y5.294 E.44713 G1 X27.915 Y4.779 E.02635 G1 X20.675 Y8.798 E.42396 G1 X20.542 Y8.357 E.02358 G1 X27.915 Y4.265 E.43175 G1 X27.915 Y3.75 E.02635 G1 X20.379 Y7.933 E.44134 G1 X20.333 Y7.821 E.00619 G1 X20.122 Y7.561 E.01716 G1 X27.915 Y3.235 E.45638 G1 X27.915 Y2.769 E.02386 G3 X27.282 Y3.072 I-1.728 J-2.799 E.03603 G1 X20.146 Y7.033 E.41785 G1 X21.801 Y5.676 E.10955 G1 X21.757 Y5.624 E.00348 G1 X26.03 Y3.253 E.25019 G3 X25.313 Y3.136 I.182 J-3.361 E.03724 G1 X21.462 Y5.273 E.2255 G1 X21.383 Y5.178 E.00635 G1 X21.259 Y4.872 E.01693 G1 X24.766 Y2.925 E.20538 G3 X24.317 Y2.659 I1.528 J-3.089 E.02671 G1 X21.116 Y4.436 E.18746 G1 X21.028 Y4.153 E.01515 G1 X20.254 Y4.4 E.04158 G1 X23.944 Y2.351 E.21608 G3 X23.635 Y2.009 I2.676 J-2.729 E.02367 G1 X20.691 Y3.643 E.17237 G1 X20.572 Y3.194 E.02376 G1 X23.382 Y1.634 E.16457 G3 X23.181 Y1.231 I3.885 J-2.189 E.02307 G1 X20.41 Y2.769 E.16227 G1 X20.367 Y2.663 E.00586 G1 X20.168 Y2.389 E.01735 G1 X23.041 Y.794 E.16822 G3 X22.956 Y.327 I2.33 J-.667 E.02436 G1 X20.212 Y1.85 E.16069 G1 X21.777 Y.563 E.10373 G1 X21.736 Y.489 E.00434 G1 X22.948 Y-.183 E.07099 G3 X23.028 Y-.743 I3.318 J.191 E.02896 G1 X21.518 Y.095 E.08843 G1 X21.3 Y-.298 E.02304 G1 X23.574 Y-1.56 E.13312 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.956 Y-.622 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X27.915 Y-4.485 E.40752 G1 X27.915 Y-4.715 E.01181 G1 X27.404 Y-4.715 E.0262 G1 X20.231 Y-.734 E.42005 G1 X20.108 Y-.693 E.00662 G1 X20.017 Y-.856 E.00956 G1 X20.655 Y-1.387 E.0425 G1 X20.646 Y-1.479 E.00473 G1 X26.477 Y-4.715 E.34144 G1 X25.549 Y-4.715 E.04748 G1 X20.597 Y-1.966 E.29002 G1 X20.591 Y-2.025 E.00304 G1 X20.441 Y-2.395 E.0204 G1 X24.622 Y-4.715 E.24482 G1 X23.695 Y-4.715 E.04748 G1 X20.216 Y-2.784 E.20373 G2 X19.982 Y-3.092 I-1.294 J.742 E.01983 G1 X20.283 Y-3.336 E.01985 G1 X23.132 Y-4.918 E.16687 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.369 Y3.983 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X12.234 Y6.278 E.24216 G2 X12.368 Y5.689 I-2.793 J-.948 E.03101 G1 X15.852 Y3.755 E.204 G1 X15.581 Y3.67 E.01454 G1 X15.603 Y3.379 E.01493 G1 X12.372 Y5.172 E.18917 G2 X12.294 Y4.7 I-4.172 J.448 E.02448 G1 X15.58 Y2.877 E.19239 G2 X15.391 Y2.467 I-1.65 J.51 E.02317 G1 X12.135 Y4.274 E.1907 G2 X11.912 Y3.883 I-1.596 J.652 E.02311 G1 X15.133 Y2.095 E.18863 G1 X14.838 Y1.744 E.02347 G1 X11.625 Y3.528 E.18816 G2 X11.259 Y3.216 I-2.464 J2.526 E.02463 G1 X14.642 Y1.339 E.19811 G1 X16.517 Y-.181 E.12359 G1 X16.501 Y-.208 E.00162 G1 X10.804 Y2.954 E.33359 G2 X10.213 Y2.768 I-1.142 J2.59 E.0318 G1 X16.293 Y-.607 E.35603 G1 X16.182 Y-.88 E.01507 G1 X16.166 Y-1.052 E.00884 G1 X9.34 Y2.737 E.39974 G2 X8.785 Y2.879 I.259 J2.18 E.02943 G1 X8.785 Y2.531 E.0178 G1 X15.687 Y-1.3 E.4042 G1 X15.467 Y-1.693 E.02304 G1 X8.785 Y2.016 E.39134 G1 X8.785 Y1.502 E.02635 G1 X15.603 Y-2.283 E.39926 G2 X15.433 Y-2.703 I-2.04 J.578 E.02326 G1 X8.785 Y.987 E.38934 G1 X8.785 Y.472 E.02635 G1 X15.187 Y-3.081 E.37492 G2 X14.858 Y-3.413 I-1.39 J1.051 E.02402 G1 X8.785 Y-.042 E.35562 G1 X8.785 Y-.557 E.02635 G1 X14.424 Y-3.687 E.33021 G1 X13.955 Y-3.941 E.02731 G1 X8.785 Y-1.072 E.30277 G1 X8.785 Y-1.586 E.02635 G1 X16.302 Y-5.759 E.44019 G1 X16.189 Y-5.961 E.01186 G1 X18.915 Y-7.474 E.15963 G1 X18.915 Y-7.724 E.01279 G1 X8.785 Y-2.101 E.59324 G1 X8.785 Y-2.285 E.0094 G1 X8.188 Y-2.285 E.03053 G1 X18.915 Y-8.239 E.62816 G1 X18.915 Y-8.753 E.02635 G1 X7.261 Y-2.285 E.68246 G1 X6.334 Y-2.285 E.04748 G1 X18.915 Y-9.268 E.73676 G1 X18.915 Y-9.783 E.02635 G1 X5.407 Y-2.285 E.79106 G1 X4.479 Y-2.285 E.04748 G1 X18.819 Y-10.244 E.83973 G1 X18.915 Y-10.395 E.00918 G1 X18.915 Y-10.812 E.02133 G1 X3.552 Y-2.285 E.89965 G1 X2.625 Y-2.285 E.04748 G1 X18.915 Y-11.327 E.95395 G1 X18.915 Y-11.841 E.02635 G1 X1.698 Y-2.285 E1.00825 G1 X.77 Y-2.285 E.04748 G1 X18.915 Y-12.356 E1.06255 G1 X18.915 Y-12.871 E.02635 G1 X-.157 Y-2.285 E1.11685 G1 X-1.084 Y-2.285 E.04748 G1 X18.915 Y-13.385 E1.17114 G1 X18.915 Y-13.9 E.02635 G1 X-2.011 Y-2.285 E1.22544 G1 X-2.939 Y-2.285 E.04748 G1 X18.915 Y-14.415 E1.27974 G1 X18.915 Y-14.929 E.02635 G1 X-3.866 Y-2.285 E1.33404 G1 X-4.585 Y-2.285 E.03679 G1 X-4.585 Y-1.886 E.02042 G1 X-16.015 Y4.459 E.66937 G1 X-16.015 Y3.944 E.02635 G1 X18.799 Y-15.379 E2.03864 G1 X18.915 Y-15.559 E.01096 G1 X18.915 Y-15.959 E.02049 G1 X-16.015 Y3.43 E2.04549 G1 X-16.015 Y2.915 E.02635 G1 X18.915 Y-16.473 E2.04549 G1 X18.915 Y-16.988 E.02635 G1 X-16.015 Y2.4 E2.04549 G1 X-16.015 Y1.886 E.02635 G1 X18.915 Y-17.503 E2.04549 G1 X18.915 Y-18.017 E.02635 G1 X-16.015 Y1.371 E2.04549 G1 X-16.015 Y.856 E.02635 G1 X18.915 Y-18.532 E2.04549 G1 X18.915 Y-19.047 E.02635 G1 X-16.015 Y.342 E2.04549 G1 X-16.015 Y-.173 E.02635 G1 X18.915 Y-19.561 E2.04549 G1 X18.915 Y-20.076 E.02635 G1 X-16.015 Y-.688 E2.04549 G1 X-16.015 Y-1.202 E.02635 G1 X18.778 Y-20.514 E2.03741 G1 X18.915 Y-20.72 E.01269 G1 X18.915 Y-21.105 E.01972 G1 X-16.015 Y-1.717 E2.04549 G1 X-16.015 Y-2.232 E.02635 G1 X18.915 Y-21.62 E2.04549 G1 X18.915 Y-22.135 E.02635 G1 X-16.848 Y-2.285 E2.09421 G1 X-17.775 Y-2.285 E.04748 G1 X18.915 Y-22.649 E2.14851 G1 X18.915 Y-23.164 E.02635 G1 X-18.702 Y-2.285 E2.20281 G1 X-19.629 Y-2.285 E.04748 G1 X18.915 Y-23.679 E2.25711 G1 X18.915 Y-24.194 E.02635 G1 X-20.557 Y-2.285 E2.3114 G1 X-21.484 Y-2.285 E.04748 G1 X18.915 Y-24.708 E2.3657 G1 X18.915 Y-25.223 E.02635 G1 X-22.411 Y-2.285 E2.42 G1 X-23.338 Y-2.285 E.04748 G1 X18.789 Y-25.667 E2.46691 G1 X18.915 Y-25.859 E.01174 G1 X18.915 Y-26.252 E.02014 G1 X-24.266 Y-2.285 E2.5286 G1 X-25.193 Y-2.285 E.04748 G1 X18.915 Y-26.767 E2.58289 G1 X18.915 Y-27.282 E.02635 G1 X-26.12 Y-2.285 E2.63719 G1 X-27.047 Y-2.285 E.04748 G1 X18.915 Y-27.796 E2.69149 G1 X18.915 Y-28.311 E.02635 G1 X-28.339 Y-2.082 E2.76715 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.074 Y1.141 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X18.915 Y-28.826 E3.16153 G1 X18.915 Y-29.34 E.02635 G1 X-35.333 Y.77 E3.17669 G1 X-35.673 Y.586 E.01978 G1 X-35.765 Y.496 E.00663 G1 X18.915 Y-29.855 E3.20199 G1 X18.915 Y-30.37 E.02635 M73 P37 R51 G1 X-36.085 Y.159 E3.22075 G3 X-36.329 Y-.221 I.531 J-.608 E.0234 G1 X18.773 Y-30.805 E3.22665 G1 X18.819 Y-31.288 E.02484 M73 P37 R50 G1 X18.869 Y-31.373 E.00503 G1 X-36.49 Y-.646 E3.24169 G1 X-36.505 Y-.691 E.00241 G1 X-36.183 Y-.983 E.02226 G1 X-36.331 Y-1.249 E.01556 G1 X18.915 Y-31.914 E3.23512 G1 X18.915 Y-32.428 E.02635 G1 X-36.549 Y-1.642 E3.24792 G1 X-36.703 Y-1.918 E.01615 G1 X-37.036 Y-1.824 E.01772 G1 X-37.046 Y-1.881 E.003 G1 X18.915 Y-32.943 E3.27703 G1 X18.915 Y-33.458 E.02635 G1 X-37.183 Y-2.32 E3.28502 G1 X-37.27 Y-2.537 E.01195 G1 X-34.551 Y-4.046 E.15926 G1 X-34.778 Y-4.17 E.01325 G1 X18.915 Y-33.972 E3.1442 G1 X18.915 Y-34.487 E.02635 G1 X-35.247 Y-4.424 E3.17165 G1 X-35.594 Y-4.612 E.0202 G1 X-35.689 Y-4.693 E.00641 G1 X18.915 Y-35.002 E3.19755 G1 X18.915 Y-35.516 E.02635 G1 X-36.031 Y-5.018 E3.21758 G3 X-36.286 Y-5.391 I.688 J-.744 E.02334 G1 X18.788 Y-35.96 E3.22505 G1 X18.768 Y-36.4 E.02255 G1 X18.829 Y-36.497 E.00587 G1 X-36.466 Y-5.806 E3.23797 G1 X-36.516 Y-5.941 E.00736 G1 X-36.465 Y-6.321 E.01965 G1 X18.915 Y-37.06 E3.24299 G1 X18.915 Y-37.575 E.02635 G1 X-36.688 Y-6.712 E3.25603 G1 X-37.279 Y-6.899 E.03175 G1 X18.915 Y-38.09 E3.29066 G1 X18.915 Y-38.604 E.02635 G1 X-39.515 Y-6.172 E3.4216 G1 X-39.515 Y-6.687 E.02635 G1 X-18.018 Y-18.619 E1.25887 G2 X-16.664 Y-19.156 I-.306 J-2.745 E.07545 G2 X-16.179 Y-19.64 I-1.595 J-2.085 E.03519 G1 X18.915 Y-39.119 E2.05505 G1 X18.915 Y-39.634 E.02635 G1 X-15.788 Y-20.372 E2.03214 G2 X-15.633 Y-20.972 I-2.498 J-.961 E.0318 G1 X18.915 Y-40.148 E2.02311 G1 X18.915 Y-40.663 E.02635 G1 X-15.626 Y-21.491 E2.02268 G2 X-15.7 Y-21.964 I-1.835 J.046 E.0246 G1 X18.915 Y-41.178 E2.02704 G1 X18.915 Y-41.255 E.00395 G1 X18.642 Y-41.376 E.01529 G1 X18.808 Y-41.633 E.01565 G1 X-15.863 Y-22.389 E2.03024 G2 X-16.075 Y-22.785 I-1.281 J.431 E.02315 G1 X18.915 Y-42.207 E2.04899 G1 X18.915 Y-42.722 E.02635 G1 X-16.359 Y-23.142 E2.06563 G2 X-16.72 Y-23.457 I-2.433 J2.42 E.02451 G1 X18.915 Y-43.236 E2.08672 G1 X18.915 Y-43.751 E.02635 G1 X-17.171 Y-23.721 E2.11315 G2 X-17.752 Y-23.913 I-1.149 J2.502 E.03141 G1 X19.118 Y-44.378 E2.15905 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.58 Y-18.822 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-39.515 Y-7.202 E1.22596 G1 X-39.515 Y-7.716 E.02635 G1 X-19.439 Y-18.86 E1.17565 G3 X-19.889 Y-19.125 I.781 J-1.842 E.02681 G1 X-39.515 Y-8.231 E1.14929 G1 X-39.515 Y-8.746 E.02635 G1 X-20.247 Y-19.441 E1.12835 G3 X-20.53 Y-19.798 I1.216 J-1.254 E.02342 G1 X-39.515 Y-9.26 E1.11177 G1 X-39.515 Y-9.775 E.02635 G1 X-20.749 Y-20.191 E1.09893 G3 X-20.901 Y-20.621 I3.611 J-1.522 E.02337 G1 X-39.515 Y-10.29 E1.09 G1 X-39.515 Y-10.804 E.02635 G1 X-20.975 Y-21.095 E1.08571 G3 X-20.966 Y-21.615 I1.978 J-.226 E.02668 G1 X-39.515 Y-11.319 E1.08622 G1 X-39.515 Y-11.834 E.02635 G1 X-20.53 Y-22.372 E1.11176 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.718 Y-12.236 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-20.401 Y-22.958 E1.13114 G3 X-18.623 Y-23.945 I2.049 J1.597 E.107 G1 X18.915 Y-44.78 E2.19818 G1 X18.915 Y-45.295 E.02635 G1 X-39.515 Y-12.863 E3.4216 G1 X-39.515 Y-13.378 E.02635 G1 X18.915 Y-45.81 E3.4216 G1 X18.915 Y-46.324 E.02635 G1 X-39.515 Y-13.892 E3.4216 G1 X-39.515 Y-14.407 E.02635 G1 X18.787 Y-46.768 E3.41407 G1 X18.915 Y-46.962 E.01194 G1 X18.915 Y-47.354 E.02005 G1 X-39.515 Y-14.922 E3.4216 G1 X-39.515 Y-15.436 E.02635 G1 X-35.931 Y-17.426 E.20991 G1 X-35.658 Y-17.462 E.01408 G1 X-35.2 Y-17.567 E.02406 G1 X-34.806 Y-17.705 E.02137 G1 X-34.392 Y-17.908 E.02364 G1 X-34.034 Y-18.138 E.02175 G1 X-33.828 Y-18.298 E.01334 G1 X-33.529 Y-18.57 E.0207 G1 X-33.214 Y-18.934 E.02468 G1 X18.915 Y-47.868 E3.05258 G1 X18.915 Y-48.383 E.02635 G1 X-32.759 Y-19.701 E3.02596 G1 X-32.666 Y-19.929 E.01259 M73 P38 R50 G1 X-32.537 Y-20.339 E.02204 G1 X18.915 Y-48.898 E3.01293 G1 X18.915 Y-49.412 E.02635 G1 X-32.439 Y-20.908 E3.0072 G1 X-32.423 Y-21.432 E.02681 G1 X18.915 Y-49.927 E3.00629 G1 X18.915 Y-50.442 E.02635 G1 X-32.472 Y-21.919 E3.00913 G1 X-32.575 Y-22.377 E.024 G1 X18.915 Y-50.956 E3.01519 G1 X18.915 Y-51.471 E.02635 G1 X-32.728 Y-22.806 E3.02414 G1 X-32.928 Y-23.21 E.02307 G1 X30.915 Y-58.646 E3.73854 G1 X30.915 Y-59.161 E.02635 G1 X-33.174 Y-23.588 E3.75297 G1 X-33.468 Y-23.94 E.02346 G1 X30.915 Y-59.676 E3.77015 G1 X30.915 Y-59.715 E.00203 G1 X30.06 Y-59.715 E.04381 G1 X-33.811 Y-24.264 E3.74017 G1 X-34.211 Y-24.556 E.02537 G1 X29.132 Y-59.715 E3.70929 G1 X28.205 Y-59.715 E.04748 M73 P38 R49 G1 X-34.678 Y-24.812 E3.68232 G1 X-35.232 Y-25.019 E.03029 G1 X27.278 Y-59.715 E3.66046 G1 X26.351 Y-59.715 E.04748 G1 X14.985 Y-53.407 E.66558 G1 X14.985 Y-53.921 E.02635 G1 X25.423 Y-59.715 E.61128 G1 X24.496 Y-59.715 E.04748 G1 X14.985 Y-54.436 E.55698 G1 X14.985 Y-54.951 E.02635 G1 X23.569 Y-59.715 E.50268 G1 X22.642 Y-59.715 E.04748 G1 X14.985 Y-55.465 E.44839 G1 X14.985 Y-55.98 E.02635 G1 X21.714 Y-59.715 E.39409 G1 X20.787 Y-59.715 E.04748 G1 X14.985 Y-56.495 E.33979 G1 X14.985 Y-57.009 E.02635 G1 X19.86 Y-59.715 E.28549 G1 X18.933 Y-59.715 E.04748 G1 X14.985 Y-57.524 E.23119 G1 X14.985 Y-58.039 E.02635 G1 X18.005 Y-59.715 E.1769 G1 X17.078 Y-59.715 E.04748 G1 X14.985 Y-58.553 E.1226 G1 X14.985 Y-59.068 E.02635 G1 X16.151 Y-59.715 E.0683 G1 X15.224 Y-59.715 E.04748 G1 X14.782 Y-59.47 E.02586 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.104 Y-52.918 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-36.254 Y-24.967 E2.94888 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.718 Y-23.559 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-38.623 Y-24.166 E.06411 G1 X-38.623 Y-24.4 E.01196 G1 X-38.208 Y-24.668 E.02527 G1 X-37.659 Y-24.922 E.03099 G1 X-37.296 Y-25.04 E.01955 G1 X-36.905 Y-25.12 E.02044 G1 X12.812 Y-52.715 E2.91133 G1 X11.885 Y-52.715 E.04748 G1 X-39.515 Y-24.186 E3.0099 G1 X-39.515 Y-24.497 E.01594 G1 X-39.23 Y-24.859 E.02359 G1 X-18.045 Y-36.617 E1.24055 G2 X-16.16 Y-37.664 I-.237 J-2.649 E.11365 G1 X10.957 Y-52.715 E1.58797 G1 X10.03 Y-52.715 E.04748 G1 X-15.781 Y-38.389 E1.51146 G2 X-15.632 Y-38.986 I-2.414 J-.918 E.03158 G1 X9.103 Y-52.715 E1.44846 G1 X8.176 Y-52.715 E.04748 G1 X-15.627 Y-39.504 E1.39383 G2 X-15.703 Y-39.976 I-1.832 J.052 E.02457 G1 X7.248 Y-52.715 E1.34398 G1 X6.415 Y-52.715 E.04265 G1 X6.415 Y-52.768 E.00268 G1 X-15.86 Y-40.404 E1.30442 G2 X-16.082 Y-40.795 I-1.598 J.646 E.02311 G1 X6.415 Y-53.282 E1.3174 G1 X6.415 Y-53.797 E.02635 G1 X-16.367 Y-41.151 E1.33412 G2 X-16.731 Y-41.465 I-2.433 J2.454 E.02457 G1 X6.415 Y-54.312 E1.35539 G1 X6.415 Y-54.826 E.02635 G1 X-17.184 Y-41.728 E1.38193 G2 X-17.77 Y-41.917 I-1.142 J2.537 E.03161 G1 X6.618 Y-55.453 E1.42812 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.601 Y-36.823 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-38.574 Y-25.738 E1.16954 G1 X-39.35 Y-25.822 E.03996 G1 X-19.452 Y-36.866 E1.16518 G3 X-19.9 Y-37.132 I.786 J-1.835 E.02676 G1 X-39.515 Y-26.244 E1.14865 G1 X-39.515 Y-26.759 E.02635 G1 X-20.255 Y-37.45 E1.12788 G3 X-20.536 Y-37.808 I1.22 J-1.249 E.0234 G1 X-39.515 Y-27.274 E1.11139 G1 X-39.515 Y-27.788 E.02635 G1 X-20.754 Y-38.202 E1.09862 G3 X-20.904 Y-38.633 I3.506 J-1.457 E.0234 G1 X-39.515 Y-28.303 E1.08986 G1 X-39.515 Y-28.818 E.02635 G1 X-20.976 Y-39.108 E1.08566 G3 X-20.965 Y-39.629 I1.982 J-.22 E.02673 G1 X-39.515 Y-29.332 E1.08628 G1 X-39.515 Y-29.632 E.01532 G1 X-39.2 Y-30.022 E.02573 G1 X-20.521 Y-40.39 E1.0938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.948 Y-30.677 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X6.415 Y-55.856 E2.65639 G1 X6.415 Y-56.37 E.02635 G1 X-39.389 Y-30.947 E2.68223 G1 X-39.515 Y-30.965 E.00653 G1 X-39.515 Y-31.391 E.02181 G1 X6.415 Y-56.885 E2.68963 G1 X6.415 Y-57.4 E.02635 G1 X-39.515 Y-31.906 E2.68963 G1 X-39.515 Y-32.42 E.02635 G1 X6.415 Y-57.914 E2.68963 G1 X6.415 Y-58.429 E.02635 G1 X-39.515 Y-32.935 E2.68963 G1 X-39.515 Y-33.45 E.02635 G1 X-35.958 Y-35.424 E.20829 G1 X-35.669 Y-35.46 E.01493 G1 X-35.208 Y-35.564 E.02418 G1 X-34.806 Y-35.706 E.02186 G1 X-34.392 Y-35.908 E.0236 G1 X-33.971 Y-36.183 E.0257 G1 X-33.659 Y-36.446 E.02091 G1 X-33.472 Y-36.631 E.01345 G1 X-33.196 Y-36.957 E.02188 G1 X6.415 Y-58.944 E2.3196 G1 X6.415 Y-59.458 E.02635 G1 X-32.75 Y-37.719 E2.29348 G1 X-32.664 Y-37.934 E.01187 G1 X-32.533 Y-38.355 E.02254 G1 X5.951 Y-59.715 E2.25356 G1 X5.024 Y-59.715 E.04748 G1 X-32.438 Y-38.922 E2.19368 G1 X-32.424 Y-39.445 E.02675 G1 X4.097 Y-59.715 E2.13858 G1 X3.169 Y-59.715 E.04748 G1 X-32.474 Y-39.932 E2.08721 G1 X-32.579 Y-40.388 E.02398 G1 X2.242 Y-59.715 E2.03904 G1 X1.315 Y-59.715 E.04748 M73 P39 R49 G1 X-32.733 Y-40.817 E1.99376 G1 X-32.934 Y-41.22 E.02306 G1 X.388 Y-59.715 E1.95123 G1 X-.54 Y-59.715 E.04748 G1 X-33.181 Y-41.598 E1.91142 G1 X-33.476 Y-41.949 E.02347 G1 X-1.467 Y-59.715 E1.87438 G1 X-2.394 Y-59.715 E.04748 G1 X-33.821 Y-42.272 E1.84029 G1 X-34.222 Y-42.564 E.02541 G1 X-3.321 Y-59.715 E1.8095 G1 X-4.249 Y-59.715 E.04748 G1 X-34.691 Y-42.818 E1.78264 G1 X-35.248 Y-43.024 E.03039 G1 X-5.176 Y-59.715 E1.76095 G1 X-6.103 Y-59.715 E.04748 G1 X-36.278 Y-42.967 E1.76696 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.718 Y-41.572 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-38.623 Y-42.18 E.06411 G1 X-38.623 Y-42.4 E.01127 G1 X-38.208 Y-42.668 E.02527 G1 X-37.666 Y-42.92 E.03064 G1 X-37.302 Y-43.038 E.0196 G1 X-36.942 Y-43.113 E.01882 G1 X-7.03 Y-59.715 E1.75155 G1 X-7.958 Y-59.715 E.04748 G1 X-39.515 Y-42.199 E1.84797 G1 X-39.515 Y-42.714 E.02635 G1 X-8.885 Y-59.715 E1.79367 G1 X-9.812 Y-59.715 E.04748 G1 X-39.515 Y-43.229 E1.73937 G1 X-39.515 Y-43.743 E.02635 G1 X-10.739 Y-59.715 E1.68508 G1 X-11.667 Y-59.715 E.04748 G1 X-39.515 Y-44.258 E1.63078 G1 X-39.515 Y-44.773 E.02635 G1 X-12.594 Y-59.715 E1.57648 G1 X-13.521 Y-59.715 E.04748 G1 X-39.515 Y-45.287 E1.52218 G1 X-39.515 Y-45.802 E.02635 G1 X-14.448 Y-59.715 E1.46788 G1 X-15.376 Y-59.715 E.04748 G1 X-27.015 Y-53.255 E.68161 G1 X-27.015 Y-53.769 E.02635 G1 X-16.303 Y-59.715 E.62731 G1 X-17.23 Y-59.715 E.04748 G1 X-27.015 Y-54.284 E.57301 G1 X-27.015 Y-54.799 E.02635 G1 X-18.157 Y-59.715 E.51871 G1 X-19.085 Y-59.715 E.04748 G1 X-27.015 Y-55.313 E.46442 G1 X-27.015 Y-55.828 E.02635 G1 X-20.012 Y-59.715 E.41012 G1 X-20.939 Y-59.715 E.04748 G1 X-27.015 Y-56.343 E.35582 G1 X-27.015 Y-56.857 E.02635 G1 X-21.866 Y-59.715 E.30152 G1 X-22.794 Y-59.715 E.04748 G1 X-27.015 Y-57.372 E.24722 G1 X-27.015 Y-57.887 E.02635 G1 X-23.721 Y-59.715 E.19293 G1 X-24.648 Y-59.715 E.04748 G1 X-27.015 Y-58.401 E.13863 G1 X-27.015 Y-58.916 E.02635 G1 X-25.575 Y-59.715 E.08433 G1 X-26.503 Y-59.715 E.04748 G1 X-27.218 Y-59.318 E.04189 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.622 Y-52.918 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-39.515 Y-46.317 E.69645 G1 X-39.515 Y-46.831 E.02635 G1 X-28.914 Y-52.715 E.62078 G1 X-29.842 Y-52.715 E.04748 G1 X-39.515 Y-47.346 E.56649 G1 X-39.515 Y-47.861 E.02635 G1 X-30.769 Y-52.715 E.51219 G1 X-31.696 Y-52.715 E.04748 G1 X-39.515 Y-48.375 E.45789 G1 X-39.515 Y-48.89 E.02635 G1 X-32.623 Y-52.715 E.40359 G1 X-33.551 Y-52.715 E.04748 G1 X-39.515 Y-49.405 E.34929 G1 X-39.515 Y-49.919 E.02635 G1 X-34.478 Y-52.715 E.295 G1 X-35.405 Y-52.715 E.04748 G1 X-39.515 Y-50.434 E.2407 G1 X-39.515 Y-50.949 E.02635 G1 X-35.585 Y-53.13 E.23018 G1 X-35.585 Y-53.645 E.02635 G1 X-39.515 Y-51.463 E.23018 G1 X-39.515 Y-51.978 E.02635 G1 X-35.585 Y-54.16 E.23018 G1 X-35.585 Y-54.674 E.02635 G1 X-39.89 Y-52.285 E.25213 G1 X-40.817 Y-52.285 E.04748 G1 X-35.585 Y-55.189 E.30643 G1 X-35.585 Y-55.704 E.02635 G1 X-41.745 Y-52.285 E.36073 G1 X-42.672 Y-52.285 E.04748 G1 X-35.585 Y-56.218 E.41503 G1 X-35.585 Y-56.733 E.02635 G1 X-43.599 Y-52.285 E.46932 G1 X-44.526 Y-52.285 E.04748 G1 X-35.585 Y-57.248 E.52362 G1 X-35.585 Y-57.762 E.02635 G1 X-45.454 Y-52.285 E.57792 G1 X-46.381 Y-52.285 E.04748 G1 X-35.585 Y-58.277 E.63222 G1 X-35.585 Y-58.792 E.02635 G1 X-47.308 Y-52.285 E.68652 G1 X-48.235 Y-52.285 E.04748 G1 X-35.585 Y-59.306 E.74081 G1 X-35.585 Y-59.715 E.02094 G1 X-35.775 Y-59.715 E.00975 G1 X-49.163 Y-52.285 E.78396 G1 X-50.09 Y-52.285 E.04748 G1 X-36.702 Y-59.715 E.78396 G1 X-37.63 Y-59.715 E.04748 G1 X-51.017 Y-52.285 E.78396 G1 X-51.515 Y-52.285 E.02551 G1 X-51.515 Y-52.523 E.01219 G1 X-38.557 Y-59.715 E.75883 G1 X-39.484 Y-59.715 E.04748 G1 X-51.515 Y-53.037 E.70453 G1 X-51.515 Y-53.552 E.02635 G1 X-40.411 Y-59.715 E.65024 G1 X-41.339 Y-59.715 E.04748 G1 X-51.515 Y-54.067 E.59594 G1 X-51.515 Y-54.581 E.02635 G1 X-42.266 Y-59.715 E.54164 G1 X-43.193 Y-59.715 E.04748 G1 X-51.515 Y-55.096 E.48734 G1 X-51.515 Y-55.611 E.02635 G1 X-44.12 Y-59.715 E.43304 G1 X-45.048 Y-59.715 E.04748 G1 X-51.515 Y-56.125 E.37874 G1 X-51.515 Y-56.64 E.02635 G1 X-45.975 Y-59.715 E.32445 G1 X-46.902 Y-59.715 E.04748 G1 X-51.515 Y-57.155 E.27015 G1 X-51.515 Y-57.669 E.02635 G1 X-47.829 Y-59.715 E.21585 G1 X-48.757 Y-59.715 E.04748 G1 X-51.515 Y-58.184 E.16155 G1 X-51.515 Y-58.699 E.02635 G1 X-49.684 Y-59.715 E.10725 G1 X-50.611 Y-59.715 E.04748 G1 X-51.718 Y-59.101 E.06481 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-50.611 Y-59.715 G1 X-49.877 Y-59.715 ;WIPE_END G1 X-46.179 Y-53.038 Z2.6 F30000 G1 X-36.533 Y-35.62 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-39.515 Y-33.964 E.17465 G1 X-39.515 Y-34.479 E.02635 G1 X-37.498 Y-35.599 E.11817 G1 X-37.782 Y-35.701 E.01547 G1 X-38.031 Y-35.818 E.01408 G1 X-39.169 Y-35.186 E.06664 G1 X-38.548 Y-35.937 E.04987 G1 X-38.698 Y-35.962 E.00778 G1 X-38.482 Y-36.082 E.01265 G1 X-38.623 Y-36.176 E.00868 G1 X-38.623 Y-36.518 E.01752 G1 X-39.409 Y-36.082 E.04602 G1 X-39.515 Y-36.1 E.00553 G1 X-39.515 Y-36.201 E.00517 G1 X-38.645 Y-37.021 E.06123 G1 X-38.421 Y-37.146 E.01313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-38.645 Y-37.021 G1 X-39.515 Y-36.201 G1 X-39.515 Y-36.1 G1 X-39.409 Y-36.082 G1 X-39.113 Y-36.247 ;WIPE_END G1 X-38.057 Y-28.687 Z2.6 F30000 G1 X-36.511 Y-17.618 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-39.515 Y-15.951 E.17592 G1 X-39.515 Y-16.466 E.02635 G1 X-37.482 Y-17.594 E.11905 G1 X-37.776 Y-17.698 E.01596 G1 X-38.018 Y-17.811 E.01367 G1 X-39.515 Y-16.98 E.08768 G1 X-39.515 Y-17.495 E.02635 G1 X-38.471 Y-18.075 E.06115 G1 X-38.623 Y-18.176 E.00936 G1 X-38.623 Y-18.505 E.01683 G1 X-39.515 Y-18.01 E.05226 G1 X-39.515 Y-18.524 E.02635 G1 X-38.623 Y-19.02 E.05226 G1 X-38.623 Y-19.334 E.01608 G3 X-38.736 Y-19.471 I.616 J-.623 E.00915 G1 X-39.515 Y-19.039 E.04561 G1 X-39.515 Y-19.554 E.02635 G1 X-38.799 Y-19.951 E.04194 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.379 Y-23.751 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 ;HEIGHT:0.2 G1 F1500 M106 S255 G1 X-37.477 Y-24.547 E.037 G1 X-37.156 Y-24.648 E.01032 G1 X-36.697 Y-24.732 E.01434 G1 X-38.379 Y-23.248 E.06894 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.261 Y-22.47 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F1500 G1 X-39.552 Y-22.212 E.01194 G1 X-39.552 Y-21.709 E.01546 G1 X-36.11 Y-24.748 E.14106 G1 X-35.849 Y-24.727 E.00806 G1 X-35.613 Y-24.684 E.00738 G1 X-39.552 Y-21.206 E.16145 G1 X-39.552 Y-20.703 E.01546 M73 P39 R48 G1 X-35.177 Y-24.566 E.17932 G1 X-34.788 Y-24.405 E.01291 G1 X-39.471 Y-20.272 E.19191 G2 X-39.369 Y-20.261 I.064 J-.113 E.00324 G1 X-39.172 Y-20.293 E.00614 G1 X-39.045 Y-20.381 E.00474 G1 X-38.838 Y-20.328 E.00658 G1 X-34.439 Y-24.211 E.1803 G1 X-34.123 Y-23.987 E.0119 G1 X-38.603 Y-20.032 E.18363 G1 X-38.398 Y-19.71 E.01173 G1 X-33.841 Y-23.733 E.18681 G1 X-33.59 Y-23.451 E.01159 G1 X-38.209 Y-19.374 E.18933 G1 X-38.209 Y-18.871 E.01546 G1 X-33.372 Y-23.141 E.19829 G1 X-33.184 Y-22.803 E.01187 G1 X-38.19 Y-18.384 E.20518 G1 X-37.844 Y-18.187 E.01224 G1 X-33.031 Y-22.436 E.19729 G1 X-32.916 Y-22.034 E.01283 G1 X-37.46 Y-18.023 E.18624 G1 X-37.029 Y-17.901 E.01377 G1 X-32.848 Y-21.592 E.17137 G1 X-32.841 Y-21.095 E.01526 G1 X-36.537 Y-17.832 E.15151 G1 X-36.286 Y-17.82 E.00772 G1 X-35.96 Y-17.838 E.01005 G1 X-32.92 Y-20.522 E.1246 G1 X-33.057 Y-20.065 E.01466 G1 X-33.173 Y-19.796 E.00902 G1 X-35.5 Y-17.742 E.09535 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X-34 Y-19.065 ;WIPE_END G17 G3 Z2.6 I1.182 J-.291 P1 F30000 G1 X-38.379 Y-36.855 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F1500 G1 X-37.484 Y-36.031 E.03738 G1 X-37.163 Y-35.929 E.01034 G1 X-36.726 Y-35.846 E.01367 G1 X-38.379 Y-37.367 E.06902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.194 Y-38.118 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F1500 G1 X-39.552 Y-38.447 E.01493 G1 X-39.552 Y-38.959 E.01575 G1 X-36.147 Y-35.826 E.14216 G1 X-35.654 Y-35.884 E.01528 G1 X-39.552 Y-39.471 E.16278 G1 X-39.552 Y-39.984 E.01575 G1 X-35.219 Y-35.996 E.18094 G1 X-34.829 Y-36.151 E.01287 G1 X-39.353 Y-40.313 E.18888 G1 X-39.316 Y-40.307 E.00116 G3 X-39.038 Y-40.201 I.024 J.356 E.00942 G1 X-38.756 Y-40.276 E.00896 G1 X-34.477 Y-36.339 E.17865 G1 X-34.247 Y-36.494 E.00852 G1 X-34.16 Y-36.559 E.00336 G1 X-38.567 Y-40.615 E.18402 G1 X-38.35 Y-40.927 E.0117 G1 X-33.875 Y-36.809 E.18685 G1 X-33.621 Y-37.088 E.01159 G1 X-38.209 Y-41.311 E.1916 G1 X-38.209 Y-41.823 E.01575 G1 X-33.398 Y-37.396 E.20092 G1 X-33.205 Y-37.731 E.01188 G1 X-38.111 Y-42.245 E.20484 G1 X-37.758 Y-42.432 E.01228 G1 X-33.046 Y-38.097 E.19675 G1 X-32.925 Y-38.498 E.01287 G1 X-37.367 Y-42.585 E.18547 G1 X-36.929 Y-42.694 E.01386 G1 X-32.851 Y-38.942 E.17028 G1 X-32.838 Y-39.443 E.01539 G1 X-36.434 Y-42.751 E.15014 G1 X-35.85 Y-42.727 E.01794 G1 X-32.914 Y-40.025 E.1226 G1 X-33.055 Y-40.506 E.01541 G1 X-33.169 Y-40.772 E.00887 G1 X-35.381 Y-42.808 E.09239 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 M106 S255 G1 X-27.451 Y-60 E.19 G1 X6.851 Y-60 F30000 G1 F12000 G1 X14.549 Y-60 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X12.549 Y-60 ;WIPE_END G1 X6.189 Y-55.78 Z2.6 F30000 G1 X-42.652 Y-23.367 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:2.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.8 I-.257 J1.189 P1 F30000 G1 X49.496 Y-1.657 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.537 Y-1.666 E.00139 G1 X50 Y-1.758 E.01565 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.457 Y-1.65 E.00439 G1 X49.581 Y-1.231 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.622 Y-1.239 E.00129 G1 X50 Y-1.314 E.01183 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.542 Y-1.223 E.00141 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.622 Y-1.239 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.211 Y-.507 ;WIPE_END G1 X50.42 Y-2.111 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.468 Y-2.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.487 Y-2.541 E.00058 G1 X50.991 Y-2.392 E.01614 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.429 Y-2.547 E.01323 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.487 Y-2.541 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.085 Y-1.521 ;WIPE_END G1 X44.496 Y-.705 Z2.8 F30000 G1 X28.111 Y1.058 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.01 Y1.21 E.00559 G3 X25.566 Y-2.091 I-1.819 J-1.208 E.2574 G3 X26.041 Y-2.177 I.673 J2.353 E.01488 G3 X28.123 Y1.02 I.15 J2.179 E.14257 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.01 Y1.21 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.626 Y2.143 G1 X26.56 Y2.15 ;WIPE_END G1 X19.11 Y.489 Z2.8 F30000 G1 X7.71 Y-2.052 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.147 J2.165 E.33451 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.27 J2.028 E.24847 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.565 Y4.258 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.718 Y4.121 E.00634 G3 X9.084 Y3.912 I.973 J1.28 E.01296 G3 X9.546 Y3.8 I.652 J1.672 E.01467 G3 X8.535 Y4.283 I.145 J1.601 E.27524 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.718 Y4.121 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.546 Y3.8 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.367 Y3.937 G1 X10.379 Y3.944 ;WIPE_END G1 X3.171 Y6.453 Z2.8 F30000 G1 X-16.248 Y13.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.147 J-2.165 E.33451 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-29.597 Y7.318 I-1.672 J-1.595 E.03422 G3 X-29.054 Y3.776 I-.701 J-1.92 E.28105 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.463 Y8.977 Z2.8 F30000 G1 X-29.162 Y6.54 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.323 Y6.673 E.00642 G3 X-30.916 Y3.912 I-.986 J-1.271 E.16876 G3 X-30.454 Y3.8 I.652 J1.673 E.01467 G3 X-29.143 Y6.51 I.145 J1.602 E.11968 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.323 Y6.673 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.981 Y6.856 ;WIPE_END G1 X-27.474 Y.077 Z2.8 F30000 G1 X-15.993 Y-22.112 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.94 Y-21.92 E.00658 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35158 G3 X-18.509 Y-23.729 I1.51 J2.011 E.04626 G3 X-16.043 Y-22.223 I.201 J2.443 E.1025 G1 X-16.009 Y-22.148 E.00272 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.379 Y-21.981 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.334 Y-21.815 E.0057 G3 X-19.323 Y-23.06 I-1.974 J.529 E.30206 G3 X-18.482 Y-23.323 I.998 J1.721 E.02946 G3 X-16.42 Y-22.067 I.174 J2.037 E.08569 G1 X-16.396 Y-22.017 E.00184 G1 X-16.791 Y-21.841 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.755 Y-21.702 E.0044 G3 X-18.916 Y-22.776 I-1.554 J.416 E.22672 G3 X-18.454 Y-22.888 I.652 J1.672 E.01467 G3 X-16.822 Y-21.9 I.145 J1.602 E.06275 G1 X-16.809 Y-21.876 E.00084 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.755 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.837 Y-20.621 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.262 Y-20.061 ;WIPE_END G1 X-18.335 Y-27.618 Z2.8 F30000 G1 X-20.21 Y-40.824 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.036 Y-41.024 E.0088 G3 X-19.794 Y-41.235 I1.728 J1.739 E.01066 G3 X-18.509 Y-41.729 I1.51 J2.011 E.04626 G3 X-20.249 Y-40.783 I.201 J2.443 E.44336 G1 X-20.238 Y-40.795 E.00053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.904 Y-40.556 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.748 Y-40.737 E.00792 G3 X-19.323 Y-41.06 I1.44 J1.451 E.01778 G3 X-18.482 Y-41.323 I.998 J1.721 E.02946 G3 X-19.932 Y-40.527 I.174 J2.037 E.36953 G1 X-19.577 Y-40.269 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.441 Y-40.429 E.00646 G3 X-18.916 Y-40.776 I1.132 J1.143 E.01945 G3 X-18.454 Y-40.888 I.652 J1.672 E.01467 G3 X-19.602 Y-40.243 I.145 J1.602 E.26887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.441 Y-40.429 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.454 Y-40.888 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.818 Y-40.82 ;WIPE_END G1 X-20.315 Y-33.607 Z2.8 F30000 G1 X-42.748 Y31.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z2.8 F30000 G1 X-42.748 Y51.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z2.8 F30000 G1 X4.752 Y47.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 M73 P40 R48 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z2.8 F30000 G1 X4.752 Y33.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z2.8 F30000 G1 X27.252 Y31.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z2.8 F30000 G1 X-28.09 Y-52.948 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45565 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.944 E.31998 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.944 E.31997 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45565 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z2.8 F30000 G1 X7.055 Y-53.79 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z2.8 F30000 G1 X-40.155 Y-5.355 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.185 J1.445 E.44448 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.824 Y57.754 I-1.614 J-1.347 E.09306 G1 X25.703 Y57.617 E.00606 G2 X22.428 Y60.023 I-1.503 J1.386 E.19797 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.572 Y60.023 I-1.444 J1.451 E.19524 G1 X-46.351 Y60.355 E.01324 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.185 J-1.445 E.44448 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.289 Y-2.762 Z2.8 F30000 G1 X-48.79 Y-.878 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.733 Y-1.033 E.00507 G3 X-47.434 Y-2.091 I1.923 J1.034 E.05282 G3 X-46.959 Y-2.177 I.673 J2.353 E.01488 G3 X-48.898 Y-.636 I.15 J2.179 E.34072 G1 X-48.806 Y-.842 E.00691 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.733 Y-1.033 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.356 Y-2.111 ;WIPE_END G1 X-47.213 Y5.52 Z2.8 F30000 G1 X-46.195 Y59.804 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.295 Y59.619 E.00644 G3 X-45.416 Y57.512 I1.486 J-.617 E.07798 G3 X-44.954 Y57.4 I.652 J1.673 E.01467 G3 X-46.184 Y59.837 I.145 J1.602 E.21042 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.295 Y59.619 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.263 Y58.333 G1 X-46.078 Y58.02 G1 X-46.031 Y57.966 ;WIPE_END G1 X-38.401 Y58.17 Z2.8 F30000 G1 X22.805 Y59.804 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.705 Y59.619 E.00644 G3 X23.584 Y57.512 I1.486 J-.617 E.07798 G3 X24.046 Y57.4 I.652 J1.673 E.01467 G3 X22.816 Y59.837 I.145 J1.602 E.21041 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.705 Y59.619 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.737 Y58.333 G1 X22.922 Y58.02 G1 X22.969 Y57.966 ;WIPE_END G1 X17.581 Y52.561 Z2.8 F30000 G1 X-40.59 Y-5.79 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-41.858 Y-3.986 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.858 Y-4.737 E.0249 G1 X-40.975 Y-4.726 E.02927 G3 X-39.92 Y-3.416 I-2.343 J2.966 E.05627 G3 X-40.179 Y-2.105 I-1.623 J.36 E.04559 G2 X-41.234 Y-.795 I2.343 J2.966 E.05627 G2 X-40.975 Y.515 I1.623 J.36 E.04559 G3 X-39.92 Y1.826 I-2.343 J2.966 E.05627 G3 X-40.179 Y3.136 I-1.623 J.36 E.04559 G2 X-41.234 Y4.446 I2.343 J2.966 E.05627 G2 X-40.975 Y5.757 I1.623 J.36 E.04559 G3 X-39.92 Y7.067 I-2.343 J2.966 E.05627 G3 X-40.179 Y8.377 I-1.623 J.36 E.04559 G2 X-41.234 Y9.688 I2.343 J2.966 E.05627 G2 X-40.975 Y10.998 I1.623 J.36 E.04559 G3 X-39.92 Y12.308 I-2.343 J2.966 E.05627 G3 X-40.179 Y13.619 I-1.623 J.36 E.04559 G2 X-41.234 Y14.929 I2.343 J2.966 E.05627 G2 X-40.975 Y16.239 I1.623 J.36 E.04559 G3 X-39.92 Y17.55 I-2.343 J2.966 E.05627 G1 X-39.907 Y18.205 E.02174 G1 X-39.992 Y18.408 E.00729 G1 X-37.291 Y18.408 E.08959 G1 X-37.287 Y18.205 E.00673 G1 X-37.559 Y17.55 E.02353 G3 X-38.613 Y16.239 I2.343 J-2.966 E.05627 G3 X-38.355 Y14.929 I1.623 J-.36 E.04559 G2 X-37.3 Y13.619 I-2.343 J-2.966 E.05627 G2 X-37.559 Y12.308 I-1.623 J-.36 E.04559 G3 X-38.613 Y10.998 I2.343 J-2.966 E.05627 G3 X-38.355 Y9.688 I1.623 J-.36 E.04559 G2 X-37.3 Y8.377 I-2.343 J-2.966 E.05627 G2 X-37.559 Y7.067 I-1.623 J-.36 E.04559 G3 X-38.613 Y5.757 I2.343 J-2.966 E.05627 G3 X-38.355 Y4.446 I1.623 J-.36 E.04559 G2 X-37.3 Y3.136 I-2.343 J-2.966 E.05627 G2 X-37.559 Y1.826 I-1.623 J-.36 E.04559 G3 X-38.613 Y.515 I2.343 J-2.966 E.05627 G3 X-38.355 Y-.795 I1.623 J-.36 E.04559 G2 X-37.3 Y-2.105 I-2.343 J-2.966 E.05627 G2 X-37.559 Y-3.416 I-1.623 J-.36 E.04559 G3 X-38.613 Y-4.726 I2.343 J-2.966 E.05627 G3 X-37.999 Y-6.408 I1.89 J-.263 E.06182 G1 X-35.809 Y-6.408 E.07266 G2 X-36.006 Y-5.381 I1.167 J.756 E.03555 G2 X-35.392 Y-4.369 I1.612 J-.285 E.04018 G1 X-35.392 Y-1.63 E.09084 G2 X-35.993 Y-.795 I1.658 J1.826 E.03438 G2 X-35.392 Y.872 I1.883 J.264 E.06116 G1 X-35.392 Y3.611 E.09084 G2 X-35.993 Y4.446 I1.658 J1.826 E.03438 G2 X-35.392 Y6.114 I1.883 J.264 E.06116 G1 X-35.392 Y8.852 E.09084 G2 X-35.993 Y9.688 I1.658 J1.826 E.03438 G2 X-35.392 Y11.355 I1.883 J.264 E.06116 G1 X-35.392 Y14.094 E.09084 G2 X-35.993 Y14.929 I1.658 J1.826 E.03438 G2 X-35.392 Y16.596 I1.883 J.264 E.06116 G1 X-35.392 Y18.225 E.05401 G1 X-39.825 Y18.8 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-41.968 Y18.8 E.06587 ;WIDTH:0.436259 G1 X-42.093 Y18.737 E.00447 ;WIDTH:0.468779 G1 X-42.218 Y18.675 E.00484 ;WIDTH:0.507399 G1 X-42.301 Y18.561 E.00536 ;WIDTH:0.511465 G1 X-42.319 Y18.769 E.00801 ;WIDTH:0.474879 G1 X-42.338 Y18.978 E.00738 ;WIDTH:0.421301 G1 X-42.356 Y19.187 E.00647 G1 X-42.356 Y21.331 E.0661 G1 X-39.853 Y18.828 E.10914 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.735 Y19.177 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G2 X-41.979 Y19.187 I-.44 J21.969 E.03822 G1 X-41.979 Y20.421 E.0379 G1 X-40.763 Y19.205 E.05282 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.593 Y19.503 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.394398 G1 F15000 G1 X-41.658 Y19.541 E.00218 G1 X-41.591 Y19.576 E.00218 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.303 Y17.744 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.526098 G1 F15000 G1 X-42.303 Y18.521 E.03056 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.321 Y16.597 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.556959 G1 F14888.097 G1 X-43.208 Y17.485 E.05255 G1 X-42.544 Y17.485 E.0278 G1 X-42.303 Y17.744 E.01486 G3 X-42.321 Y16.637 I15.763 J-.813 E.04638 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.227 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.422094 G1 F15000 G1 X-42.25 Y15.944 E.08642 G1 X-42.25 Y15.839 E.00325 G1 X-42.267 Y15.821 E.00076 G1 X-42.267 Y15.425 E.01224 G1 X-44.594 Y17.752 E.10167 G1 X-45.13 Y17.752 E.01657 G1 X-42.267 Y14.889 E.1251 G1 X-42.267 Y14.353 E.01657 G1 X-45.666 Y17.752 E.14853 G1 X-46.203 Y17.752 E.01657 G1 X-42.267 Y13.816 E.17196 G1 X-42.267 Y13.28 E.01657 G1 X-46.739 Y17.752 E.19539 G1 X-47.275 Y17.752 E.01657 G1 X-42.267 Y12.744 E.21883 G1 X-42.267 Y12.208 E.01657 G1 X-47.811 Y17.752 E.24226 G1 X-47.838 Y17.752 E.00083 G1 X-47.838 Y17.548 E.00629 G1 X-48.144 Y17.548 E.00945 G1 X-42.267 Y11.672 E.2568 G1 X-42.267 Y11.135 E.01657 G1 X-48.552 Y17.42 E.27461 G1 X-48.552 Y16.884 E.01657 G1 X-42.267 Y10.599 E.27461 G1 X-42.267 Y10.063 E.01657 G1 X-48.552 Y16.347 E.27461 G1 X-48.552 Y15.811 E.01657 G1 X-42.267 Y9.527 E.27461 G1 X-42.267 Y8.99 E.01657 G1 X-48.552 Y15.275 E.27461 G1 X-48.552 Y14.739 E.01657 G1 X-42.267 Y8.454 E.27461 G1 X-42.267 Y7.918 E.01657 G1 X-48.552 Y14.203 E.27461 G1 X-48.552 Y13.666 E.01657 G1 X-42.267 Y7.382 E.27461 G1 X-42.267 Y6.845 E.01657 G1 X-48.552 Y13.13 E.27461 G1 X-48.552 Y12.594 E.01657 G1 X-42.267 Y6.309 E.27461 G1 X-42.267 Y5.773 E.01657 G1 X-48.552 Y12.058 E.27461 G1 X-48.552 Y11.521 E.01657 G1 X-42.267 Y5.237 E.27462 G1 X-42.267 Y4.701 E.01657 G1 X-48.552 Y10.985 E.27461 G1 X-48.552 Y10.449 E.01657 G1 X-42.267 Y4.164 E.27461 G1 X-42.267 Y3.628 E.01657 G1 X-48.552 Y9.913 E.27461 G1 X-48.552 Y9.376 E.01657 G1 X-42.267 Y3.092 E.27461 G1 X-42.267 Y2.556 E.01657 G1 X-48.552 Y8.84 E.27462 G1 X-48.552 Y8.304 E.01657 G1 X-42.267 Y2.019 E.27462 G1 X-42.267 Y1.483 E.01657 G1 X-48.552 Y7.768 E.27462 G1 X-48.552 Y7.232 E.01657 G1 X-42.267 Y.947 E.27462 G1 X-42.267 Y.411 E.01657 G1 X-48.552 Y6.695 E.27462 G1 X-48.552 Y6.159 E.01657 G1 X-45.172 Y2.779 E.14769 G3 X-46.065 Y3.136 I-1.476 J-2.398 E.02987 G1 X-48.552 Y5.623 E.10866 G1 X-48.552 Y5.087 E.01657 G1 X-46.684 Y3.219 E.08161 G3 X-47.198 Y3.197 I-.111 J-3.417 E.01592 G1 X-48.552 Y4.55 E.05914 G1 X-48.552 Y4.014 E.01657 G1 X-47.646 Y3.108 E.03958 G3 X-48.047 Y2.973 I1.321 J-4.577 E.01308 G1 X-48.722 Y3.648 E.02948 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.392 Y2.903 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-48.456 Y2.94 E.00204 G1 X-48.391 Y2.975 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.135 Y1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393957 G1 F12000 G3 X-49.211 Y.863 I8.105 J-1.761 E.0117 ;WIDTH:0.344556 G1 X-49.232 Y.745 E.00294 ;WIDTH:0.307219 G1 X-49.248 Y.613 E.00286 ;WIDTH:0.276405 G1 X-49.263 Y.495 E.00226 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00752 G1 X-49.264 Y-.485 E.00748 ;WIDTH:0.275112 G1 X-49.248 Y-.613 E.00245 ;WIDTH:0.30549 G1 X-49.234 Y-.731 E.00254 ;WIDTH:0.342224 G1 X-49.211 Y-.863 E.00326 ;WIDTH:0.385472 G1 X-49.191 Y-.981 E.00334 ;WIDTH:0.40951 G1 X-49.135 Y-1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.191 Y-.981 ;WIPE_END G1 X-42.25 Y.027 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-42.25 Y-4.556 E.14083 G1 X-48.356 Y-4.556 E.18762 G1 X-48.356 Y-3.031 E.04686 G1 X-48.092 Y-3.167 E.00913 G1 X-47.485 Y-3.35 E.01947 G1 X-46.818 Y-3.42 E.0206 G1 X-46.151 Y-3.358 E.0206 G1 X-45.508 Y-3.167 E.0206 G1 X-44.915 Y-2.854 E.0206 G1 X-44.395 Y-2.431 E.0206 G1 X-43.967 Y-1.915 E.0206 G1 X-43.648 Y-1.326 E.0206 G1 X-43.45 Y-.685 E.0206 G1 X-43.38 Y-.018 E.0206 G1 X-43.442 Y.649 E.0206 G1 X-43.627 Y1.272 E.01996 G1 X-42.383 Y.027 E.05407 G1 X-42.29 Y.027 E.00287 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.634 Y-.244 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.425494 G1 F15000 G3 X-42.627 Y-4.179 I275.204 J-1.465 E.12265 G2 X-47.508 Y-4.161 I-1.63 J226.585 E.15217 ;WIDTH:0.472051 G1 X-47.949 Y-4.149 E.01542 G1 X-47.949 Y-3.635 E.01795 G1 X-47.488 Y-3.75 E.01661 ;WIDTH:0.430339 G1 X-46.856 Y-3.797 E.02001 G1 X-46.112 Y-3.75 E.02351 G1 X-45.399 Y-3.527 E.0236 G1 X-44.738 Y-3.186 E.02349 G1 X-44.156 Y-2.723 E.02349 G1 X-43.675 Y-2.155 E.02349 G1 X-43.315 Y-1.504 E.02349 G1 X-43.079 Y-.798 E.0235 G1 X-42.998 Y-.056 E.02355 G1 X-43.002 Y.103 E.00504 G1 X-42.663 Y-.217 E.01473 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.004 Y-1.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-43.004 Y-3.802 E.06393 G1 X-45.089 Y-3.802 E.06407 G1 X-44.56 Y-3.519 E.01844 G1 X-43.917 Y-3.014 E.02513 G1 X-43.384 Y-2.394 E.02513 G1 X-43.024 Y-1.756 E.0225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.346 Y-2.887 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.35045 G1 F15000 G1 X-43.346 Y-3.459 E.01433 G1 X-43.919 Y-3.459 E.01436 G1 X-43.521 Y-3.101 E.01343 G1 X-43.372 Y-2.918 E.00591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.138 Y6.613 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419998 G1 F15000 G1 X-35.208 Y6.654 E.00251 G1 X-35.134 Y6.689 E.00252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.246 Y7.888 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-33.481 Y7.124 E.03323 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.982 Y7.157 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-33.246 Y6.7 E.01623 G1 X-33.334 Y6.444 E.00834 G1 X-34.6 Y7.709 E.05501 G1 X-34.623 Y8.799 E.03348 G1 X-33.01 Y7.186 E.0701 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.496 Y7.205 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G3 X-32.938 Y6.466 I6.268 J-4.252 E.02647 G1 X-33.118 Y5.796 E.02132 G1 X-33.125 Y5.701 E.00291 G1 X-34.867 Y7.443 E.07568 G1 X-35 Y7.443 E.0041 G1 X-35 Y9.709 E.06964 G1 X-32.524 Y7.233 E.10759 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-33.939 Y8.647 ;WIPE_END G1 X-29.684 Y2.311 Z2.8 F30000 G1 X-29.525 Y2.073 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.381379 G1 F15000 G1 X-30.044 Y2.593 E.02025 G1 X-29.525 Y2.701 E.01463 G1 X-29.525 Y2.113 E.0162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-48.409 Y52.537 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-48.472 Y52.574 E.00204 G1 X-48.407 Y52.608 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.592 Y52.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-47.655 Y52.337 E.00204 G1 X-47.59 Y52.371 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.534 Y59.534 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.388854 G1 F15000 G1 X-47.599 Y59.571 E.00211 G1 X-47.532 Y59.606 E.00211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.476 Y59.676 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-48.2 Y59.689 E.00766 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-48.476 Y59.676 ;WIPE_END G1 X-40.843 Y59.652 Z2.8 F30000 G1 X21.405 Y59.464 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.50466 G1 F15000 G2 X21.414 Y59.548 I-.028 J.046 E.00891 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X21.405 Y59.563 G1 X21.347 Y59.563 G1 X21.318 Y59.514 G1 X21.347 Y59.464 G1 X21.405 Y59.464 ;WIPE_END G1 X25.555 Y56.928 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420206 G1 F15000 G1 X27.952 Y54.531 E.10423 G1 X27.952 Y53.997 E.0164 G1 X25.337 Y56.612 E.11368 G2 X24.953 Y56.462 I-.759 J1.384 E.01271 G1 X27.952 Y53.464 E.13038 G1 X27.952 Y52.93 E.0164 G1 X24.512 Y56.37 E.14955 G2 X23.985 Y56.363 I-.288 J1.999 E.01626 G1 X28.066 Y52.282 E.17745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.757 Y58.591 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X20.596 Y59.752 E.05048 G1 X20.063 Y59.752 E.0164 G1 X21.711 Y58.104 E.07165 G3 X23.304 Y56.511 I2.447 J.854 E.07166 G1 X27.363 Y52.452 E.17649 G1 X27.238 Y52.452 E.00384 G1 X27.238 Y52.248 E.00626 G1 X27.033 Y52.248 E.0063 G1 X19.529 Y59.752 E.32626 G1 X18.996 Y59.752 E.0164 G1 X26.5 Y52.248 E.32626 G1 X25.966 Y52.248 E.0164 G1 X18.462 Y59.752 E.32626 G1 X17.929 Y59.752 E.0164 G1 X25.432 Y52.248 E.32626 G1 X24.899 Y52.248 E.0164 G1 X17.395 Y59.752 E.32626 G1 X16.862 Y59.752 E.0164 G1 X24.365 Y52.248 E.32626 G1 X23.832 Y52.248 E.0164 G1 X16.328 Y59.752 E.32626 G1 X15.794 Y59.752 E.0164 G1 X23.298 Y52.248 E.32626 G1 X22.765 Y52.248 E.0164 G1 X15.261 Y59.752 E.32626 G1 X14.727 Y59.752 E.0164 G1 X22.231 Y52.248 E.32626 G1 X21.952 Y52.248 E.00858 G1 X21.952 Y51.994 E.00782 G1 X14.194 Y59.752 E.33732 G1 X13.66 Y59.752 E.0164 G1 X21.952 Y51.46 E.36051 G1 X21.952 Y50.927 E.0164 G1 X13.127 Y59.752 E.38371 G1 X12.593 Y59.752 E.0164 G1 X21.952 Y50.393 E.40691 G1 X21.952 Y49.859 E.0164 G1 X12.059 Y59.752 E.43011 G1 X11.526 Y59.752 E.0164 G1 X21.952 Y49.326 E.45331 G1 X21.952 Y48.792 E.0164 G1 X10.992 Y59.752 E.47651 G1 X10.459 Y59.752 E.0164 G1 X21.952 Y48.259 E.49971 G1 X21.952 Y47.725 E.0164 G1 X9.925 Y59.752 E.5229 G1 X9.392 Y59.752 E.0164 G1 X21.952 Y47.192 E.5461 G1 X21.952 Y46.658 E.0164 G1 X8.858 Y59.752 E.5693 G1 X8.325 Y59.752 E.0164 G1 X21.952 Y46.125 E.5925 G1 X21.952 Y45.591 E.0164 G1 X7.791 Y59.752 E.6157 G1 X7.257 Y59.752 E.0164 G1 X21.952 Y45.057 E.6389 G1 X21.952 Y44.524 E.0164 G1 X6.724 Y59.752 E.6621 G1 X6.19 Y59.752 E.0164 G1 X21.952 Y43.99 E.6853 G1 X21.952 Y43.457 E.0164 G1 X5.657 Y59.752 E.70849 G1 X5.123 Y59.752 E.0164 G1 X21.952 Y42.923 E.73169 G1 X21.952 Y42.39 E.0164 G1 X4.59 Y59.752 E.75489 G1 X4.056 Y59.752 E.0164 G1 X21.952 Y41.856 E.77809 G1 X21.952 Y41.322 E.0164 G1 X3.522 Y59.752 E.80129 G1 X2.989 Y59.752 E.0164 G1 X21.952 Y40.789 E.82449 G1 X21.952 Y40.255 E.0164 G1 X2.455 Y59.752 E.84769 G1 X1.922 Y59.752 E.0164 G1 X21.952 Y39.722 E.87088 G1 X21.952 Y39.188 E.0164 G1 X1.388 Y59.752 E.89408 G1 X.855 Y59.752 E.0164 G1 X22.122 Y38.485 E.92466 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.886 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y35.856 E.08981 G1 X27.952 Y35.322 E.0164 G1 X25.522 Y37.752 E.10563 G1 X24.989 Y37.752 E.0164 G1 X27.952 Y34.789 E.12883 G1 X27.952 Y34.255 E.0164 G1 X24.455 Y37.752 E.15203 G1 X23.922 Y37.752 E.0164 G1 X27.952 Y33.722 E.17523 G1 X27.952 Y33.188 E.0164 G1 X23.388 Y37.752 E.19842 G1 X22.855 Y37.752 E.0164 G1 X27.952 Y32.655 E.22162 G1 X27.952 Y32.452 E.00624 G1 X27.621 Y32.452 E.01016 G1 X22.321 Y37.752 E.23045 G1 X21.952 Y37.752 E.01135 G1 X21.952 Y38.121 E.01135 G1 X.321 Y59.752 E.94048 G1 X-.213 Y59.752 E.0164 G1 X27.238 Y32.301 E1.19352 G1 X27.238 Y32.248 E.00163 G1 X26.758 Y32.248 E.01477 G1 X-.746 Y59.752 E1.19583 G1 X-1.28 Y59.752 E.0164 G1 X26.224 Y32.248 E1.19583 G1 X25.691 Y32.248 E.0164 G1 X-1.813 Y59.752 E1.19583 G1 X-2.347 Y59.752 E.0164 G1 X25.157 Y32.248 E1.19583 G1 X24.623 Y32.248 E.0164 G1 X-2.88 Y59.752 E1.19583 G1 X-3.414 Y59.752 E.0164 G1 X24.09 Y32.248 E1.19583 G1 X23.556 Y32.248 E.0164 G1 X-3.947 Y59.752 E1.19583 G1 X-4.481 Y59.752 E.0164 G1 X23.023 Y32.248 E1.19583 G1 X22.489 Y32.248 E.0164 G1 X-5.015 Y59.752 E1.19583 G1 X-5.548 Y59.752 E.0164 G1 X21.956 Y32.248 E1.19583 G1 X21.952 Y31.718 E.01629 G1 X-6.082 Y59.752 E1.21886 G1 X-6.615 Y59.752 E.0164 G1 X21.952 Y31.185 E1.24206 G1 X21.952 Y30.651 E.0164 G1 X4.948 Y47.655 E.7393 G1 X4.948 Y47.121 E.0164 G1 X21.952 Y30.118 E.7393 G1 X21.952 Y29.584 E.0164 G1 X4.948 Y46.588 E.7393 G1 X4.948 Y46.054 E.0164 G1 X21.952 Y29.05 E.7393 G1 X21.952 Y28.517 E.0164 G1 X4.948 Y45.521 E.7393 G1 X4.948 Y44.987 E.0164 G1 X21.952 Y27.983 E.7393 G1 X21.952 Y27.45 E.0164 G1 X4.948 Y44.454 E.7393 G1 X4.948 Y43.92 E.0164 G1 X21.952 Y26.916 E.7393 G1 X21.952 Y26.383 E.0164 G1 X4.948 Y43.386 E.7393 G1 X4.948 Y42.853 E.0164 G1 X21.952 Y25.849 E.7393 G1 X21.952 Y25.316 E.0164 G1 X4.948 Y42.319 E.7393 G1 X4.948 Y41.786 E.0164 G1 X21.952 Y24.782 E.7393 G1 X21.952 Y24.248 E.0164 G1 X4.948 Y41.252 E.7393 G1 X4.948 Y40.719 E.0164 G1 X21.952 Y23.715 E.7393 G1 X21.952 Y23.181 E.0164 G1 X4.948 Y40.185 E.7393 G1 X4.948 Y39.652 E.0164 G1 X21.952 Y22.648 E.7393 G1 X21.952 Y22.114 E.0164 G1 X4.948 Y39.118 E.7393 G1 X4.948 Y38.584 E.0164 G1 X21.952 Y21.581 E.7393 G1 X21.952 Y21.047 E.0164 G1 X4.948 Y38.051 E.7393 G1 X4.948 Y37.752 E.00919 G1 X4.713 Y37.752 E.00721 G1 X21.952 Y20.513 E.7495 G1 X21.952 Y19.98 E.0164 M73 P40 R47 G1 X4.18 Y37.752 E.7727 G1 X3.646 Y37.752 E.0164 G1 X21.952 Y19.446 E.7959 G1 X21.952 Y18.913 E.0164 G1 X3.113 Y37.752 E.8191 G1 X2.579 Y37.752 E.0164 G1 X22.122 Y18.21 E.84967 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.611 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y15.581 E.10178 G1 X27.952 Y15.047 E.0164 G1 X25.247 Y17.752 E.1176 G1 X24.713 Y17.752 E.0164 G1 X27.952 Y14.513 E.1408 G1 X27.952 Y13.98 E.0164 G1 X24.18 Y17.752 E.164 G1 X23.646 Y17.752 E.0164 G1 X27.952 Y13.446 E.1872 G1 X27.952 Y12.913 E.0164 G1 X23.113 Y17.752 E.2104 G1 X22.579 Y17.752 E.0164 G1 X27.952 Y12.379 E.2336 G1 X27.952 Y11.846 E.0164 G1 X21.65 Y18.148 E.27401 G1 X21.65 Y18.597 E.0138 G1 X21.447 Y18.8 E.00884 G1 X20.998 Y18.8 E.0138 G1 X2.046 Y37.752 E.82401 G1 X1.512 Y37.752 E.0164 G1 X20.464 Y18.8 E.82401 G1 X19.931 Y18.8 E.0164 G1 X4.948 Y33.782 E.65142 G1 X4.948 Y34.248 E.01432 G1 X4.482 Y34.248 E.01432 G1 X.979 Y37.752 E.15234 G1 X.445 Y37.752 E.0164 G1 X3.949 Y34.248 E.15234 G1 X3.415 Y34.248 E.0164 G1 X-.089 Y37.752 E.15234 G1 X-.622 Y37.752 E.0164 G1 X2.882 Y34.248 E.15234 G1 X2.348 Y34.248 E.0164 G1 X-1.156 Y37.752 E.15234 G1 X-1.689 Y37.752 E.0164 G1 X1.815 Y34.248 E.15234 G1 X1.281 Y34.248 E.0164 G1 X-2.223 Y37.752 E.15234 G1 X-2.756 Y37.752 E.0164 G1 X.747 Y34.248 E.15234 G1 X.214 Y34.248 E.0164 G1 X-3.29 Y37.752 E.15234 G1 X-3.824 Y37.752 E.0164 G1 X-.32 Y34.248 E.15234 G1 X-.853 Y34.248 E.0164 G1 X-4.357 Y37.752 E.15234 G1 X-4.891 Y37.752 E.0164 G1 X-1.387 Y34.248 E.15234 G1 X-1.92 Y34.248 E.0164 G1 X-5.424 Y37.752 E.15234 G1 X-5.958 Y37.752 E.0164 G1 X-2.454 Y34.248 E.15234 G1 X-2.988 Y34.248 E.0164 G1 X-6.491 Y37.752 E.15234 G1 X-7.025 Y37.752 E.0164 G1 X-3.521 Y34.248 E.15234 G1 X-4.055 Y34.248 E.0164 G1 X-7.558 Y37.752 E.15234 G1 X-8.092 Y37.752 E.0164 G1 X-4.588 Y34.248 E.15234 G1 X-5.122 Y34.248 E.0164 G1 X-8.626 Y37.752 E.15234 G1 X-9.159 Y37.752 E.0164 G1 X-5.655 Y34.248 E.15234 G1 X-6.189 Y34.248 E.0164 G1 X-9.693 Y37.752 E.15234 G1 X-10.226 Y37.752 E.0164 G1 X-6.722 Y34.248 E.15234 G1 X-7.256 Y34.248 E.0164 G1 X-10.76 Y37.752 E.15234 G1 X-11.293 Y37.752 E.0164 G1 X-7.79 Y34.248 E.15234 G1 X-8.323 Y34.248 E.0164 G1 X-11.827 Y37.752 E.15234 G1 X-12.361 Y37.752 E.0164 G1 X-8.857 Y34.248 E.15234 G1 X-9.39 Y34.248 E.0164 G1 X-12.894 Y37.752 E.15234 G1 X-13.428 Y37.752 E.0164 G1 X-9.924 Y34.248 E.15234 G1 X-10.457 Y34.248 E.0164 G1 X-13.961 Y37.752 E.15234 G1 X-14.495 Y37.752 E.0164 G1 X-10.991 Y34.248 E.15234 G1 X-11.525 Y34.248 E.0164 G1 X-15.028 Y37.752 E.15234 G1 X-15.562 Y37.752 E.0164 G1 X-12.058 Y34.248 E.15234 G1 X-12.592 Y34.248 E.0164 G1 X-16.095 Y37.752 E.15234 G1 X-16.629 Y37.752 E.0164 G1 X-13.125 Y34.248 E.15234 G1 X-13.659 Y34.248 E.0164 G1 X-17.163 Y37.752 E.15234 G1 X-17.696 Y37.752 E.0164 G1 X-14.192 Y34.248 E.15234 G1 X-14.726 Y34.248 E.0164 G1 X-18.23 Y37.752 E.15234 G1 X-18.763 Y37.752 E.0164 G1 X-15.259 Y34.248 E.15234 G1 X-15.793 Y34.248 E.0164 G1 X-19.297 Y37.752 E.15234 G1 X-19.83 Y37.752 E.0164 G1 X-16.327 Y34.248 E.15234 G1 X-16.86 Y34.248 E.0164 G1 X-20.364 Y37.752 E.15234 G1 X-20.898 Y37.752 E.0164 G1 X-17.394 Y34.248 E.15234 G1 X-17.927 Y34.248 E.0164 G1 X-21.431 Y37.752 E.15234 G1 X-21.965 Y37.752 E.0164 G1 X-18.461 Y34.248 E.15234 G1 X-18.994 Y34.248 E.0164 G1 X-22.498 Y37.752 E.15234 G1 X-23.032 Y37.752 E.0164 G1 X-19.528 Y34.248 E.15234 G1 X-20.062 Y34.248 E.0164 G1 X-23.565 Y37.752 E.15234 G1 X-24.099 Y37.752 E.0164 G1 X-20.595 Y34.248 E.15234 G1 X-21.129 Y34.248 E.0164 G1 X-24.802 Y37.922 E.15972 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-23.388 Y36.507 ;WIPE_END G1 X-16.337 Y39.43 Z2.8 F30000 G1 X4.525 Y48.078 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-7.149 Y59.752 E.50755 G1 X-7.682 Y59.752 E.0164 G1 X3.821 Y48.248 E.50017 G1 X3.288 Y48.248 E.0164 G1 X-8.216 Y59.752 E.50017 G1 X-8.75 Y59.752 E.0164 G1 X2.754 Y48.248 E.50017 G1 X2.221 Y48.248 E.0164 G1 X-9.283 Y59.752 E.50017 G1 X-9.817 Y59.752 E.0164 G1 X1.687 Y48.248 E.50017 G1 X1.154 Y48.248 E.0164 G1 X-10.35 Y59.752 E.50017 G1 X-10.884 Y59.752 E.0164 G1 X.62 Y48.248 E.50017 G1 X.086 Y48.248 E.0164 G1 X-11.417 Y59.752 E.50017 G1 X-11.951 Y59.752 E.0164 G1 X-.447 Y48.248 E.50017 G1 X-.981 Y48.248 E.0164 G1 X-12.484 Y59.752 E.50017 G1 X-13.018 Y59.752 E.0164 G1 X-1.514 Y48.248 E.50017 G1 X-2.048 Y48.248 E.0164 G1 X-13.552 Y59.752 E.50017 G1 X-14.085 Y59.752 E.0164 G1 X-2.581 Y48.248 E.50017 G1 X-3.115 Y48.248 E.0164 G1 X-14.619 Y59.752 E.50017 G1 X-15.152 Y59.752 E.0164 G1 X-3.648 Y48.248 E.50017 G1 X-4.182 Y48.248 E.0164 G1 X-15.686 Y59.752 E.50017 G1 X-16.219 Y59.752 E.0164 G1 X-4.716 Y48.248 E.50017 G1 X-5.249 Y48.248 E.0164 G1 X-16.753 Y59.752 E.50017 G1 X-17.287 Y59.752 E.0164 G1 X-5.783 Y48.248 E.50017 G1 X-6.316 Y48.248 E.0164 G1 X-17.82 Y59.752 E.50017 G1 X-18.354 Y59.752 E.0164 G1 X-6.85 Y48.248 E.50017 G1 X-7.383 Y48.248 E.0164 G1 X-18.887 Y59.752 E.50017 G1 X-19.421 Y59.752 E.0164 G1 X-7.917 Y48.248 E.50017 G1 X-8.451 Y48.248 E.0164 G1 X-19.954 Y59.752 E.50017 G1 X-20.488 Y59.752 E.0164 G1 X-8.984 Y48.248 E.50017 G1 X-9.518 Y48.248 E.0164 G1 X-21.021 Y59.752 E.50017 G1 X-21.555 Y59.752 E.0164 G1 X-10.051 Y48.248 E.50017 G1 X-10.585 Y48.248 E.0164 G1 X-22.089 Y59.752 E.50017 G1 X-22.622 Y59.752 E.0164 G1 X-11.118 Y48.248 E.50017 G1 X-11.652 Y48.248 E.0164 G1 X-23.156 Y59.752 E.50017 G1 X-23.689 Y59.752 E.0164 G1 X-12.185 Y48.248 E.50017 G1 X-12.719 Y48.248 E.0164 G1 X-24.223 Y59.752 E.50017 G1 X-24.756 Y59.752 E.0164 G1 X-13.253 Y48.248 E.50017 G1 X-13.786 Y48.248 E.0164 G1 X-25.29 Y59.752 E.50017 G1 X-25.824 Y59.752 E.0164 G1 X-14.32 Y48.248 E.50017 G1 X-14.853 Y48.248 E.0164 G1 X-26.357 Y59.752 E.50017 G1 X-26.891 Y59.752 E.0164 G1 X-15.387 Y48.248 E.50017 G1 X-15.92 Y48.248 E.0164 G1 X-27.424 Y59.752 E.50017 G1 X-27.958 Y59.752 E.0164 G1 X-16.454 Y48.248 E.50017 G1 X-16.988 Y48.248 E.0164 G1 X-28.491 Y59.752 E.50017 G1 X-29.025 Y59.752 E.0164 G1 X-17.521 Y48.248 E.50017 G1 X-18.055 Y48.248 E.0164 G1 X-29.558 Y59.752 E.50017 G1 X-30.092 Y59.752 E.0164 G1 X-18.588 Y48.248 E.50017 G1 X-19.122 Y48.248 E.0164 G1 X-30.626 Y59.752 E.50017 G1 X-31.159 Y59.752 E.0164 G1 X-19.655 Y48.248 E.50017 G1 X-20.189 Y48.248 E.0164 G1 X-31.693 Y59.752 E.50017 G1 X-32.226 Y59.752 E.0164 G1 X-20.722 Y48.248 E.50017 G1 X-21.256 Y48.248 E.0164 G1 X-32.76 Y59.752 E.50017 G1 X-33.293 Y59.752 E.0164 G1 X-21.79 Y48.248 E.50017 G1 X-22.323 Y48.248 E.0164 G1 X-33.827 Y59.752 E.50017 G1 X-34.361 Y59.752 E.0164 G1 X-22.857 Y48.248 E.50017 G1 X-23.39 Y48.248 E.0164 M73 P41 R47 G1 X-34.894 Y59.752 E.50017 G1 X-35.428 Y59.752 E.0164 G1 X-23.924 Y48.248 E.50017 G1 X-24.457 Y48.248 E.0164 G1 X-35.961 Y59.752 E.50017 G1 X-36.495 Y59.752 E.0164 G1 X-24.991 Y48.248 E.50017 G1 X-25.525 Y48.248 E.0164 G1 X-37.028 Y59.752 E.50017 G1 X-37.562 Y59.752 E.0164 G1 X-25.548 Y47.738 E.52234 G1 X-25.548 Y47.205 E.0164 G1 X-38.095 Y59.752 E.54554 G1 X-38.629 Y59.752 E.0164 G1 X-25.548 Y46.671 E.56874 G1 X-25.548 Y46.137 E.0164 G1 X-39.163 Y59.752 E.59194 G1 X-39.696 Y59.752 E.0164 G1 X-25.548 Y45.604 E.61514 G1 X-25.548 Y45.07 E.0164 G1 X-40.23 Y59.752 E.63834 G1 X-40.763 Y59.752 E.0164 G1 X-25.548 Y44.537 E.66154 G1 X-25.548 Y44.003 E.0164 G1 X-41.297 Y59.752 E.68473 G1 X-41.83 Y59.752 E.0164 G1 X-25.548 Y43.47 E.70793 G1 X-25.548 Y42.936 E.0164 G1 X-42.225 Y59.613 E.72509 G2 X-42.149 Y59.004 I-2.275 J-.591 E.01892 G1 X-25.548 Y42.402 E.7218 G1 X-25.548 Y41.869 E.0164 G1 X-42.199 Y58.519 E.72394 G2 X-42.312 Y58.1 I-1.652 J.222 E.01341 G1 X-25.548 Y41.335 E.72889 G1 X-25.548 Y40.802 E.0164 G1 X-42.477 Y57.73 E.73604 G2 X-42.685 Y57.405 I-1.341 J.627 E.01191 G1 X-25.548 Y40.268 E.74507 G1 X-25.548 Y39.735 E.0164 G1 X-42.933 Y57.119 E.75586 G2 X-43.221 Y56.874 I-1.076 J.971 E.01167 G1 X-25.548 Y39.201 E.76839 G1 X-25.548 Y38.668 E.0164 G1 X-43.549 Y56.668 E.78263 G2 X-43.92 Y56.505 I-.802 J1.328 E.01249 G1 X-25.548 Y38.134 E.79877 G1 X-25.548 Y37.752 E.01175 G1 X-25.166 Y37.752 E.01175 G1 X-21.662 Y34.248 E.15234 G1 X-22.196 Y34.248 E.0164 G1 X-44.342 Y56.394 E.96288 G2 X-44.833 Y56.351 I-.539 J3.346 E.01516 G1 X-22.729 Y34.248 E.96102 G1 X-23.263 Y34.248 E.0164 G1 X-45.709 Y56.695 E.97594 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.267 Y58.785 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.022 Y59.54 E.03283 G1 X-48.067 Y59.495 E.00197 G1 X-48.47 Y59.455 E.01246 G1 X-47.105 Y58.091 E.05934 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y59.173 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-23.796 Y34.248 E1.08371 G1 X-24.33 Y34.248 E.0164 G1 X-48.552 Y58.47 E1.05313 G1 X-48.552 Y57.936 E.0164 G1 X-24.864 Y34.248 E1.02993 G1 X-25.397 Y34.248 E.0164 G1 X-42.552 Y51.403 E.74586 G1 X-42.552 Y50.869 E.0164 G1 X-25.548 Y33.865 E.7393 G1 X-25.548 Y33.332 E.0164 G1 X-42.552 Y50.336 E.7393 G1 X-42.552 Y49.802 E.0164 G1 X-25.548 Y32.798 E.7393 G1 X-25.548 Y32.265 E.0164 G1 X-42.552 Y49.269 E.7393 G1 X-42.552 Y48.735 E.0164 G1 X-25.548 Y31.731 E.7393 G1 X-25.548 Y31.198 E.0164 G1 X-42.552 Y48.201 E.7393 G1 X-42.552 Y47.668 E.0164 G1 X-25.548 Y30.664 E.7393 G1 X-25.548 Y30.131 E.0164 G1 X-42.552 Y47.134 E.7393 G1 X-42.552 Y46.601 E.0164 G1 X-25.548 Y29.597 E.7393 G1 X-25.548 Y29.063 E.0164 G1 X-42.552 Y46.067 E.7393 G1 X-42.552 Y45.534 E.0164 G1 X-25.548 Y28.53 E.7393 G1 X-25.548 Y27.996 E.0164 G1 X-42.552 Y45 E.7393 G1 X-42.552 Y44.466 E.0164 G1 X-25.548 Y27.463 E.7393 G1 X-25.548 Y26.929 E.0164 G1 X-42.552 Y43.933 E.7393 G1 X-42.552 Y43.399 E.0164 G1 X-25.548 Y26.396 E.7393 G1 X-25.548 Y25.862 E.0164 G1 X-42.552 Y42.866 E.7393 G1 X-42.552 Y42.332 E.0164 G1 X-25.548 Y25.328 E.7393 G1 X-25.548 Y24.795 E.0164 G1 X-42.722 Y41.968 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.228 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y57.403 E.2315 G1 X-48.552 Y56.869 E.0164 G1 X-43.931 Y52.248 E.20092 G1 X-44.464 Y52.248 E.0164 G1 X-48.552 Y56.336 E.17772 G1 X-48.552 Y55.802 E.0164 G1 X-44.998 Y52.248 E.15452 G1 X-45.531 Y52.248 E.0164 G1 X-48.552 Y55.269 E.13133 G1 X-48.552 Y54.735 E.0164 G1 X-46.065 Y52.248 E.10813 G1 X-46.599 Y52.248 E.0164 G1 X-48.552 Y54.201 E.08493 G1 X-48.552 Y53.668 E.0164 G1 X-47.132 Y52.248 E.06173 G1 X-47.196 Y52.248 E.00197 G1 X-47.613 Y52.665 E.01812 G1 X-47.848 Y52.43 E.01021 G1 X-48.722 Y53.304 E.03799 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-47.848 Y52.43 G1 X-47.613 Y52.665 G1 X-47.307 Y52.359 ;WIPE_END G1 X-40.134 Y49.751 Z2.8 F30000 G1 X4.778 Y33.418 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X19.397 Y18.8 E.6356 G1 X18.864 Y18.8 E.0164 G1 X4.948 Y32.715 E.60503 G1 X4.948 Y32.182 E.0164 G1 X18.33 Y18.8 E.58183 G1 X17.796 Y18.8 E.0164 G1 X4.948 Y31.648 E.55863 G1 X4.948 Y31.115 E.0164 G1 X17.263 Y18.8 E.53543 G1 X16.729 Y18.8 E.0164 G1 X4.948 Y30.581 E.51223 G1 X4.948 Y30.047 E.0164 G1 X16.196 Y18.8 E.48903 G1 X15.662 Y18.8 E.0164 G1 X4.948 Y29.514 E.46583 G1 X4.948 Y28.98 E.0164 G1 X15.129 Y18.8 E.44264 G1 X14.599 Y18.796 E.01628 G1 X4.948 Y28.447 E.41962 G1 X4.948 Y27.913 E.0164 G1 X14.4 Y18.461 E.41097 G1 X14.4 Y17.927 E.0164 G1 X4.948 Y27.38 E.41097 G1 X4.948 Y26.846 E.0164 G1 X14.4 Y17.394 E.41097 G1 X14.4 Y16.86 E.0164 G1 X4.948 Y26.312 E.41097 G1 X4.948 Y25.779 E.0164 G1 X14.4 Y16.327 E.41097 G1 X14.4 Y15.793 E.0164 G1 X4.948 Y25.245 E.41097 G1 X4.948 Y24.712 E.0164 G1 X14.4 Y15.26 E.41097 G1 X14.4 Y14.726 E.0164 G1 X4.948 Y24.178 E.41097 G1 X4.948 Y23.752 E.01311 G1 X4.841 Y23.752 E.0033 G1 X14.4 Y14.193 E.41563 G1 X14.4 Y13.659 E.0164 G1 X4.307 Y23.752 E.43883 G1 X3.774 Y23.752 E.0164 G1 X14.4 Y13.125 E.46203 G1 X14.4 Y12.592 E.0164 G1 X3.24 Y23.752 E.48523 G1 X2.707 Y23.752 E.0164 G1 X14.4 Y12.058 E.50842 G1 X14.4 Y11.525 E.0164 G1 X2.173 Y23.752 E.53162 G1 X1.639 Y23.752 E.0164 G1 X14.4 Y10.991 E.55482 G1 X14.4 Y10.458 E.0164 G1 X1.106 Y23.752 E.57802 G1 X.572 Y23.752 E.0164 G1 X14.4 Y9.924 E.60122 G1 X14.4 Y9.39 E.0164 G1 X.039 Y23.752 E.62442 G1 X-.495 Y23.752 E.0164 G1 X14.4 Y8.857 E.64762 G1 X14.4 Y8.323 E.0164 G1 X-1.028 Y23.752 E.67081 G1 X-1.562 Y23.752 E.0164 G1 X7.942 Y14.248 E.41321 G1 X7.408 Y14.248 E.0164 G1 X-2.095 Y23.752 E.41321 G1 X-2.629 Y23.752 E.0164 G1 X6.875 Y14.248 E.41321 G1 X6.341 Y14.248 E.0164 G1 X-3.163 Y23.752 E.41321 G1 X-3.696 Y23.752 E.0164 G1 X5.808 Y14.248 E.41321 G1 X5.274 Y14.248 E.0164 G1 X-4.23 Y23.752 E.41321 G1 X-4.763 Y23.752 E.0164 G1 X4.741 Y14.248 E.41321 G1 X4.207 Y14.248 E.0164 G1 X-5.297 Y23.752 E.41321 G1 X-5.83 Y23.752 E.0164 G1 X3.673 Y14.248 E.41321 G1 X3.14 Y14.248 E.0164 G1 X-6.364 Y23.752 E.41321 G1 X-6.898 Y23.752 E.0164 G1 X2.606 Y14.248 E.41321 G1 X2.073 Y14.248 E.0164 G1 X-7.431 Y23.752 E.41321 G1 X-7.965 Y23.752 E.0164 G1 X1.539 Y14.248 E.41321 G1 X1.006 Y14.248 E.0164 G1 X-8.498 Y23.752 E.41321 G1 X-9.032 Y23.752 E.0164 G1 X.472 Y14.248 E.41321 G1 X-.062 Y14.248 E.0164 G1 X-9.565 Y23.752 E.41321 G1 X-10.099 Y23.752 E.0164 G1 X-.595 Y14.248 E.41321 G1 X-1.129 Y14.248 E.0164 G1 X-10.632 Y23.752 E.41321 G1 X-11.166 Y23.752 E.0164 G1 X-1.662 Y14.248 E.41321 G1 X-2.196 Y14.248 E.0164 G1 X-11.7 Y23.752 E.41321 G1 X-12.233 Y23.752 E.0164 G1 X-2.729 Y14.248 E.41321 G1 X-3.263 Y14.248 E.0164 G1 X-12.767 Y23.752 E.41321 G1 X-13.3 Y23.752 E.0164 G1 X-3.796 Y14.248 E.41321 G1 X-4.33 Y14.248 E.0164 G1 X-13.834 Y23.752 E.41321 G1 X-14.367 Y23.752 E.0164 G1 X-4.548 Y13.933 E.42693 G1 X-4.548 Y13.399 E.0164 G1 X-14.901 Y23.752 E.45013 G1 X-15.435 Y23.752 E.0164 G1 X-4.548 Y12.865 E.47333 G1 X-4.548 Y12.332 E.0164 G1 X-15.968 Y23.752 E.49653 G1 X-16.502 Y23.752 E.0164 G1 X-4.548 Y11.798 E.51973 G1 X-4.548 Y11.265 E.0164 G1 X-17.035 Y23.752 E.54292 G1 X-17.569 Y23.752 E.0164 G1 X-4.548 Y10.731 E.56612 G1 X-4.548 Y10.198 E.0164 G1 X-18.102 Y23.752 E.58932 G1 X-18.636 Y23.752 E.0164 G1 X-4.548 Y9.664 E.61252 G1 X-4.548 Y9.131 E.0164 G1 X-19.169 Y23.752 E.63572 G1 X-19.703 Y23.752 E.0164 G1 X-4.548 Y8.597 E.65892 G1 X-4.548 Y8.063 E.0164 G1 X-20.237 Y23.752 E.68212 G1 X-20.77 Y23.752 E.0164 G1 X-4.548 Y7.53 E.70531 G1 X-4.548 Y6.996 E.0164 G1 X-21.304 Y23.752 E.72851 G1 X-21.837 Y23.752 E.0164 G1 X-4.548 Y6.463 E.75171 G1 X-4.548 Y5.929 E.0164 G1 X-22.371 Y23.752 E.77491 G1 X-22.904 Y23.752 E.0164 G1 X-4.548 Y5.396 E.79811 G1 X-4.548 Y4.862 E.0164 G1 X-23.438 Y23.752 E.82131 G1 X-23.972 Y23.752 E.0164 G1 X-4.548 Y4.328 E.84451 G1 X-4.548 Y3.795 E.0164 G1 X-24.675 Y23.922 E.87508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y41.435 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.548 Y24.261 E.74668 G1 X-25.548 Y23.752 E.01566 G1 X-25.039 Y23.752 E.01566 G1 X-4.548 Y3.261 E.8909 G1 X-4.548 Y2.728 E.0164 G1 X-42.552 Y40.732 E1.65235 G1 X-42.552 Y40.198 E.0164 G1 X-16.602 Y14.248 E1.12827 G1 X-17.136 Y14.248 E.0164 G1 X-42.552 Y39.664 E1.10507 G1 X-42.552 Y39.131 E.0164 G1 X-17.669 Y14.248 E1.08187 G1 X-18.203 Y14.248 E.0164 G1 X-42.552 Y38.597 E1.05867 G1 X-42.552 Y38.064 E.0164 G1 X-18.736 Y14.248 E1.03547 G1 X-19.27 Y14.248 E.0164 G1 X-42.774 Y37.752 E1.02191 G1 X-43.307 Y37.752 E.0164 G1 X-19.803 Y14.248 E1.02191 G1 X-20.337 Y14.248 E.0164 G1 X-43.841 Y37.752 E1.02191 G1 X-44.374 Y37.752 E.0164 G1 X-20.871 Y14.248 E1.02191 G1 X-21.404 Y14.248 E.0164 G1 X-44.908 Y37.752 E1.02191 G1 X-45.441 Y37.752 E.0164 G1 X-21.938 Y14.248 E1.02191 G1 X-22.471 Y14.248 E.0164 G1 X-45.975 Y37.752 E1.02191 G1 X-46.509 Y37.752 E.0164 G1 X-23.005 Y14.248 E1.02191 G1 X-23.538 Y14.248 E.0164 G1 X-47.042 Y37.752 E1.02191 G1 X-47.576 Y37.752 E.0164 G1 X-24.072 Y14.248 E1.02191 G1 X-24.605 Y14.248 E.0164 G1 X-47.906 Y37.548 E1.01306 G1 X-48.439 Y37.548 E.0164 G1 X-43.139 Y32.248 E.23045 G1 X-43.673 Y32.248 E.0164 G1 X-48.552 Y37.127 E.21215 G1 X-48.552 Y36.594 E.0164 G1 X-44.206 Y32.248 E.18895 G1 X-44.74 Y32.248 E.0164 G1 X-48.552 Y36.06 E.16575 G1 X-48.552 Y35.527 E.0164 G1 X-45.273 Y32.248 E.14255 G1 X-45.807 Y32.248 E.0164 G1 X-48.552 Y34.993 E.11935 G1 X-48.552 Y34.46 E.0164 G1 X-46.34 Y32.248 E.09615 G1 X-46.874 Y32.248 E.0164 G1 X-48.552 Y33.926 E.07295 G1 X-48.552 Y33.392 E.0164 G1 X-47.408 Y32.248 E.04976 G1 X-47.838 Y32.248 E.01324 G1 X-47.838 Y32.452 E.00626 G1 X-48.145 Y32.452 E.00942 G1 X-48.722 Y33.029 E.02509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y31.831 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.139 Y14.248 E.76447 G1 X-25.673 Y14.248 E.0164 G1 X-42.552 Y31.127 E.73389 G1 X-42.552 Y30.594 E.0164 G1 X-26.206 Y14.248 E.71069 G1 X-26.74 Y14.248 E.0164 G1 X-42.552 Y30.06 E.68749 G1 X-42.552 Y29.527 E.0164 G1 X-27.273 Y14.248 E.66429 G1 X-27.807 Y14.248 E.0164 G1 X-42.552 Y28.993 E.6411 G1 X-42.552 Y28.46 E.0164 G1 X-28.34 Y14.248 E.6179 G1 X-28.874 Y14.248 E.0164 G1 X-42.552 Y27.926 E.5947 G1 X-42.552 Y27.392 E.0164 G1 X-29.348 Y14.189 E.57408 G1 X-29.348 Y13.655 E.0164 G1 X-42.552 Y26.859 E.57408 G1 X-42.552 Y26.325 E.0164 G1 X-29.348 Y13.122 E.57408 G1 X-29.348 Y12.588 E.0164 G1 X-35 Y18.24 E.24575 G1 X-35 Y18.597 E.01096 G1 X-35.203 Y18.8 E.00884 G1 X-35.56 Y18.8 E.01096 G1 X-42.552 Y25.792 E.304 G1 X-42.552 Y25.258 E.0164 G1 X-36.093 Y18.8 E.28081 G1 X-36.627 Y18.8 E.0164 G1 X-42.552 Y24.725 E.25761 G1 X-42.552 Y24.191 E.0164 G1 X-37.161 Y18.8 E.23441 G1 X-37.694 Y18.8 E.0164 G1 X-42.552 Y23.658 E.21121 G1 X-42.552 Y23.124 E.0164 G1 X-38.228 Y18.8 E.18801 G1 X-38.761 Y18.8 E.0164 G1 X-42.552 Y22.59 E.16481 G1 X-42.552 Y22.057 E.0164 G1 X-39.125 Y18.63 E.14899 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y17.876 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.348 Y12.054 E.25313 G1 X-29.348 Y11.521 E.0164 G1 X-35 Y17.173 E.24575 G1 X-35 Y16.639 E.0164 G1 X-29.348 Y10.987 E.24575 G1 X-29.348 Y10.454 E.0164 G1 X-35 Y16.106 E.24575 G1 X-35 Y15.572 E.0164 G1 X-29.348 Y9.92 E.24575 G1 X-29.348 Y9.387 E.0164 G1 X-35 Y15.039 E.24575 G1 X-35 Y14.505 E.0164 G1 X-29.348 Y8.853 E.24575 G1 X-29.348 Y8.319 E.0164 G1 X-35 Y13.972 E.24575 G1 X-35 Y13.438 E.0164 G1 X-29.476 Y7.914 E.2402 G3 X-30.136 Y8.04 I-.826 J-2.524 E.02072 G1 X-35 Y12.905 E.2115 G1 X-35 Y12.371 E.0164 G1 X-30.656 Y8.026 E.1889 G3 X-31.089 Y7.926 I.165 J-1.695 E.01371 G1 X-35 Y11.837 E.17008 G1 X-35 Y11.304 E.0164 G1 X-31.469 Y7.773 E.15353 G3 X-31.805 Y7.575 I.581 J-1.376 E.01202 G1 X-35 Y10.77 E.13891 G1 X-35 Y10.237 E.0164 G1 X-31.981 Y7.218 E.13125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.682 Y4.718 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-35.151 Y7.186 E.10731 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.982 Y3.018 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.348 Y1.383 E.07106 G1 X-29.348 Y.85 E.0164 G1 X-35 Y6.502 E.24575 G1 X-35 Y5.968 E.0164 G1 X-29.348 Y.316 E.24575 G1 X-29.348 Y-.218 E.0164 G1 X-35 Y5.435 E.24575 G1 X-35 Y4.901 E.0164 G1 X-29.348 Y-.751 E.24575 G1 X-29.348 Y-1.285 E.0164 G1 X-35.17 Y4.537 E.25313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-33.756 Y3.123 ;WIPE_END G1 X-27.248 Y7.111 Z2.8 F30000 G1 X-16.222 Y13.868 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.548 Y2.194 E.50755 G1 X-4.548 Y1.661 E.0164 G1 X-16.052 Y13.164 E.50017 G1 X-16.052 Y12.631 E.0164 G1 X-4.548 Y1.127 E.50017 G1 X-4.548 Y.594 E.0164 G1 X-16.052 Y12.097 E.50017 G1 X-16.052 Y11.564 E.0164 G1 X-4.548 Y.06 E.50017 G1 X-4.548 Y-.474 E.0164 G1 X-16.052 Y11.03 E.50017 G1 X-16.052 Y10.497 E.0164 G1 X-4.548 Y-1.007 E.50017 G1 X-4.548 Y-1.541 E.0164 G1 X-16.222 Y10.133 E.50755 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.807 Y8.719 ;WIPE_END G1 X-7.337 Y10.282 Z2.8 F30000 G1 X8.578 Y13.612 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X14.383 Y7.807 E.25236 G1 X14.383 Y7.274 E.0164 G1 X8.748 Y12.908 E.24499 G1 X8.748 Y12.375 E.0164 G1 X14.383 Y6.74 E.24499 G1 X14.383 Y6.207 E.0164 G1 X8.748 Y11.841 E.24499 G1 X8.748 Y11.308 E.0164 G1 X14.383 Y5.673 E.24499 G1 X14.383 Y5.139 E.0164 G1 X8.748 Y10.774 E.24499 G1 X8.748 Y10.241 E.0164 G1 X14.383 Y4.606 E.24499 G1 X14.383 Y4.534 E.0022 G1 X10.79 Y8.127 E.15622 G1 X10.606 Y7.944 E.00798 G1 X10.489 Y7.966 E.00368 G1 X8.748 Y9.707 E.07568 G1 X8.748 Y9.173 E.0164 G1 X9.867 Y8.054 E.04866 G3 X9.672 Y8.049 I.036 J-5.032 E.00602 G1 X9.414 Y8.042 E.00794 G2 X9.359 Y8.028 I-.035 J.024 E.00187 G1 X8.578 Y8.81 E.03396 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X9.359 Y8.028 G1 X9.414 Y8.042 G1 X9.672 Y8.049 G1 X9.867 Y8.054 G1 X9.595 Y8.327 ;WIPE_END G1 X11.76 Y4.027 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X14.4 Y1.387 E.1148 G1 X14.4 Y.853 E.0164 G1 X11.646 Y3.607 E.11974 G2 X11.372 Y3.348 I-1.122 J.912 E.01164 G1 X14.4 Y.32 E.13166 G1 X14.4 Y-.214 E.0164 G1 X11.059 Y3.127 E.14525 G2 X10.705 Y2.948 I-2.982 J5.454 E.01221 G1 X14.4 Y-.747 E.16066 G1 X14.4 Y-1.281 E.0164 G1 X10.298 Y2.822 E.17838 G2 X9.828 Y2.758 I-.479 J1.75 E.0146 G1 X14.4 Y-1.814 E.19878 G1 X14.4 Y-2.348 E.0164 G1 X9.262 Y2.79 E.2234 G2 X8.748 Y2.93 I.273 J2.022 E.01642 G1 X8.748 Y2.771 E.00489 G1 X14.4 Y-2.882 E.24575 G1 X14.4 Y-3.415 E.0164 G1 X8.748 Y2.237 E.24575 G1 X8.748 Y1.704 E.0164 G1 X14.4 Y-3.949 E.24575 G1 X14.4 Y-4.482 E.0164 G1 X8.748 Y1.17 E.24575 G1 X8.748 Y.636 E.0164 G1 X14.4 Y-5.016 E.24575 G1 X14.4 Y-5.549 E.0164 G1 X8.578 Y.273 E.25313 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.548 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X18.952 Y-9.034 E.10451 G1 X18.952 Y-9.567 E.0164 G1 X16.184 Y-6.8 E.12033 G1 X15.651 Y-6.8 E.0164 G1 X18.952 Y-10.101 E.14353 G1 X18.952 Y-10.635 E.0164 G1 X15.117 Y-6.8 E.16673 G1 X14.603 Y-6.8 E.01579 G1 X14.4 Y-6.597 E.00884 G1 X14.4 Y-6.083 E.01579 G1 X8.748 Y-.431 E.24575 G1 X8.748 Y-.964 E.0164 G1 X18.952 Y-11.168 E.44365 G1 X18.952 Y-11.702 E.0164 G1 X8.748 Y-1.498 E.44365 G1 X8.748 Y-2.031 E.0164 G1 X18.952 Y-12.235 E.44365 G1 X18.952 Y-12.769 E.0164 G1 X8.431 Y-2.248 E.45743 G1 X7.898 Y-2.248 E.0164 G1 X18.952 Y-13.302 E.48062 G1 X18.952 Y-13.836 E.0164 G1 X7.364 Y-2.248 E.50382 G1 X6.831 Y-2.248 E.0164 G1 X18.952 Y-14.369 E.52702 G1 X18.952 Y-14.903 E.0164 G1 X6.297 Y-2.248 E.55022 G1 X5.763 Y-2.248 E.0164 G1 X18.952 Y-15.437 E.57342 G1 X18.952 Y-15.97 E.0164 G1 X5.23 Y-2.248 E.59662 G1 X4.696 Y-2.248 E.0164 G1 X18.952 Y-16.504 E.61982 G1 X18.952 Y-17.037 E.0164 G1 X4.163 Y-2.248 E.64301 G1 X3.629 Y-2.248 E.0164 G1 X18.952 Y-17.571 E.66621 G1 X18.952 Y-18.104 E.0164 G1 X3.096 Y-2.248 E.68941 G1 X2.562 Y-2.248 E.0164 G1 X18.952 Y-18.638 E.71261 G1 X18.952 Y-19.172 E.0164 G1 X2.028 Y-2.248 E.73581 G1 X1.495 Y-2.248 E.0164 G1 X18.952 Y-19.705 E.75901 G1 X18.952 Y-20.239 E.0164 G1 X.961 Y-2.248 E.78221 G1 X.428 Y-2.248 E.0164 G1 X18.952 Y-20.772 E.8054 G1 X18.952 Y-21.306 E.0164 G1 X-.106 Y-2.248 E.8286 G1 X-.639 Y-2.248 E.0164 G1 X18.952 Y-21.839 E.8518 G1 X18.952 Y-22.373 E.0164 G1 X-1.173 Y-2.248 E.875 G1 X-1.706 Y-2.248 E.0164 G1 X18.952 Y-22.906 E.8982 G1 X18.952 Y-23.44 E.0164 G1 X-2.24 Y-2.248 E.9214 G1 X-2.774 Y-2.248 E.0164 G1 X18.952 Y-23.974 E.9446 G1 X18.952 Y-24.507 E.0164 G1 X-3.307 Y-2.248 E.96779 G1 X-3.841 Y-2.248 E.0164 G1 X18.952 Y-25.041 E.99099 G1 X18.952 Y-25.574 E.0164 G1 X-16.052 Y9.429 E1.52192 G1 X-16.052 Y8.896 E.0164 G1 X18.952 Y-26.108 E1.52192 G1 X18.952 Y-26.641 E.0164 G1 X-16.052 Y8.362 E1.52192 G1 X-16.052 Y7.829 E.0164 G1 X18.952 Y-27.175 E1.52192 G1 X18.952 Y-27.709 E.0164 G1 X-16.052 Y7.295 E1.52192 G1 X-16.052 Y6.762 E.0164 G1 X18.952 Y-28.242 E1.52192 G1 X18.952 Y-28.776 E.0164 G1 X-16.052 Y6.228 E1.52192 G1 X-16.052 Y5.695 E.0164 G1 X18.952 Y-29.309 E1.52192 G1 X18.952 Y-29.843 E.0164 G1 X-16.052 Y5.161 E1.52192 G1 X-16.052 Y4.627 E.0164 G1 X18.952 Y-30.376 E1.52192 G1 X18.952 Y-30.91 E.0164 G1 X-16.052 Y4.094 E1.52192 G1 X-16.052 Y3.56 E.0164 G1 X18.952 Y-31.443 E1.52192 G1 X18.952 Y-31.977 E.0164 G1 X-16.052 Y3.027 E1.52192 G1 X-16.052 Y2.493 E.0164 G1 X18.952 Y-32.511 E1.52192 G1 X18.952 Y-33.044 E.0164 G1 X-16.052 Y1.96 E1.52192 G1 X-16.052 Y1.426 E.0164 G1 X18.952 Y-33.578 E1.52192 G1 X18.952 Y-34.111 E.0164 G1 X-16.052 Y.892 E1.52192 G1 X-16.052 Y.359 E.0164 G1 X18.952 Y-34.645 E1.52192 G1 X18.952 Y-35.178 E.0164 G1 X-16.052 Y-.175 E1.52192 G1 X-16.052 Y-.708 E.0164 G1 X18.952 Y-35.712 E1.52192 G1 X18.952 Y-36.246 E.0164 G1 X-16.052 Y-1.242 E1.52192 G1 X-16.052 Y-1.775 E.0164 G1 X18.952 Y-36.779 E1.52192 G1 X18.952 Y-37.313 E.0164 G1 X-16.113 Y-2.248 E1.52456 G1 X-16.646 Y-2.248 E.0164 G1 X18.952 Y-37.846 E1.54776 G1 X18.952 Y-38.38 E.0164 G1 X-17.18 Y-2.248 E1.57096 G1 X-17.713 Y-2.248 E.0164 G1 X18.952 Y-38.913 E1.59416 G1 X18.952 Y-39.447 E.0164 G1 X-18.247 Y-2.248 E1.61735 G1 X-18.781 Y-2.248 E.0164 G1 X18.952 Y-39.98 E1.64055 G1 X18.952 Y-40.514 E.0164 G1 X-19.314 Y-2.248 E1.66375 G1 X-19.848 Y-2.248 E.0164 G1 X18.952 Y-41.048 E1.68695 G1 X18.952 Y-41.581 E.0164 G1 X-20.381 Y-2.248 E1.71015 G1 X-20.915 Y-2.248 E.0164 G1 X18.952 Y-42.115 E1.73335 G1 X18.952 Y-42.648 E.0164 G1 X-21.448 Y-2.248 E1.75655 G1 X-21.982 Y-2.248 E.0164 G1 X18.952 Y-43.182 E1.77974 G1 X18.952 Y-43.715 E.0164 G1 X-22.515 Y-2.248 E1.80294 G1 X-23.049 Y-2.248 E.0164 G1 X18.952 Y-44.249 E1.82614 G1 X18.952 Y-44.783 E.0164 G1 X-23.583 Y-2.248 E1.84934 G1 X-24.116 Y-2.248 E.0164 G1 X18.952 Y-45.316 E1.87254 G1 X18.952 Y-45.85 E.0164 G1 X-24.65 Y-2.248 E1.89574 G1 X-25.183 Y-2.248 E.0164 G1 X18.952 Y-46.383 E1.91894 G1 X18.952 Y-46.917 E.0164 G1 X-25.717 Y-2.248 E1.94213 G1 X-26.25 Y-2.248 E.0164 G1 X18.952 Y-47.45 E1.96533 G1 X18.952 Y-47.984 E.0164 G1 X-26.784 Y-2.248 E1.98853 G1 X-27.318 Y-2.248 E.0164 G1 X18.952 Y-48.518 E2.01173 G1 X18.952 Y-49.051 E.0164 G1 X-27.851 Y-2.248 E2.03493 G1 X-28.385 Y-2.248 E.0164 G1 X18.952 Y-49.585 E2.05813 G1 X18.952 Y-50.118 E.0164 G1 X-28.918 Y-2.248 E2.08133 G1 X-29.348 Y-2.248 E.01322 G1 X-29.348 Y-1.818 E.01322 G1 X-35 Y3.834 E.24575 G1 X-35 Y3.3 E.0164 G1 X18.952 Y-50.652 E2.34576 G1 X18.952 Y-51.185 E.0164 G1 X-35.17 Y2.936 E2.35314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-33.756 Y1.522 ;WIPE_END G1 X-26.434 Y3.678 Z2.8 F30000 G1 X21.48 Y17.784 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y11.312 E.28139 G1 X27.952 Y10.779 E.0164 G1 X21.65 Y17.081 E.27401 G1 X21.65 Y16.547 E.0164 G1 X27.952 Y10.245 E.27401 G1 X27.952 Y9.711 E.0164 G1 X21.65 Y16.014 E.27401 G1 X21.65 Y15.48 E.0164 G1 X27.952 Y9.178 E.27401 G1 X27.952 Y8.644 E.0164 G1 X21.65 Y14.946 E.27401 G1 X21.65 Y14.413 E.0164 G1 X27.952 Y8.111 E.27401 G1 X27.952 Y7.577 E.0164 G1 X21.65 Y13.879 E.27401 G1 X21.65 Y13.346 E.0164 G1 X27.952 Y7.044 E.27401 G1 X27.952 Y6.51 E.0164 G1 X21.65 Y12.812 E.27401 G1 X21.65 Y12.279 E.0164 G1 X27.952 Y5.976 E.27401 G1 X27.952 Y5.443 E.0164 G1 X21.65 Y11.745 E.27401 G1 X21.65 Y11.212 E.0164 G1 X27.952 Y4.909 E.27401 G1 X27.952 Y4.376 E.0164 G1 X21.65 Y10.678 E.27401 G1 X21.65 Y10.144 E.0164 G1 X27.952 Y3.842 E.27401 G1 X27.952 Y3.309 E.0164 G1 X21.65 Y9.611 E.27401 G1 X21.65 Y9.077 E.0164 G1 X27.952 Y2.775 E.27401 G1 X27.952 Y2.705 E.00216 G3 X27.098 Y3.095 I-1.669 J-2.522 E.02898 G1 X21.65 Y8.544 E.23689 G1 X21.65 Y8.01 E.0164 G1 X26.447 Y3.212 E.2086 G3 X25.916 Y3.211 I-.257 J-2.7 E.01637 G1 X21.65 Y7.477 E.18548 G1 X21.65 Y6.943 E.0164 G1 X25.458 Y3.134 E.16559 G3 X25.05 Y3.009 I.432 J-2.135 E.01315 G1 X21.65 Y6.409 E.14784 G1 X21.65 Y5.876 E.0164 G1 X24.809 Y2.717 E.13734 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X23.394 Y4.131 ;WIPE_END G1 X24.395 Y-3.435 Z2.8 F30000 G1 X31.122 Y-54.284 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X29.085 Y-52.248 E.08854 G1 X28.552 Y-52.248 E.0164 G1 X30.952 Y-54.648 E.10436 G1 X30.952 Y-55.182 E.0164 G1 X28.018 Y-52.248 E.12756 G1 X27.485 Y-52.248 E.0164 G1 X30.952 Y-55.715 E.15076 G1 X30.952 Y-56.249 E.0164 G1 X26.951 Y-52.248 E.17395 G1 X26.417 Y-52.248 E.0164 G1 X30.952 Y-56.783 E.19715 G1 X30.952 Y-57.316 E.0164 G1 X25.884 Y-52.248 E.22035 G1 X25.35 Y-52.248 E.0164 G1 X30.952 Y-57.85 E.24355 G1 X30.952 Y-58.383 E.0164 M73 P42 R47 G1 X24.817 Y-52.248 E.26675 G1 X24.283 Y-52.248 E.0164 G1 X30.952 Y-58.917 E.28995 G1 X30.952 Y-59.45 E.0164 G1 X23.75 Y-52.248 E.31315 G1 X23.216 Y-52.248 E.0164 G1 X30.72 Y-59.752 E.32626 G1 X30.186 Y-59.752 E.0164 M73 P42 R46 G1 X22.682 Y-52.248 E.32626 G1 X22.149 Y-52.248 E.0164 G1 X29.653 Y-59.752 E.32626 G1 X29.119 Y-59.752 E.0164 G1 X21.615 Y-52.248 E.32626 G1 X21.082 Y-52.248 E.0164 G1 X28.586 Y-59.752 E.32626 G1 X28.052 Y-59.752 E.0164 G1 X20.548 Y-52.248 E.32626 G1 X20.015 Y-52.248 E.0164 G1 X27.518 Y-59.752 E.32626 G1 X26.985 Y-59.752 E.0164 G1 X19.481 Y-52.248 E.32626 G1 X18.952 Y-52.248 E.01627 G1 X18.952 Y-51.719 E.01627 G1 X-35 Y2.233 E2.34576 G1 X-35 Y1.7 E.0164 G1 X26.451 Y-59.752 E2.67183 G1 X25.918 Y-59.752 E.0164 G1 X-35 Y1.166 E2.64863 G1 X-35 Y.633 E.0164 G1 X25.384 Y-59.752 E2.62543 G1 X24.851 Y-59.752 E.0164 G1 X-35 Y.099 E2.60224 G1 X-35 Y-.435 E.0164 G1 X24.317 Y-59.752 E2.57904 G1 X23.784 Y-59.752 E.0164 G1 X-35 Y-.968 E2.55584 G1 X-35 Y-1.502 E.0164 G1 X-17.814 Y-18.688 E.74723 G3 X-18.392 Y-18.643 I-.501 J-2.732 E.01786 G1 X-35 Y-2.035 E.7221 G1 X-35 Y-2.569 E.0164 G1 X-18.865 Y-18.704 E.70152 G3 X-19.269 Y-18.834 I.19 J-1.279 E.01309 G1 X-35 Y-3.102 E.68398 G1 X-35 Y-3.636 E.0164 G1 X-19.636 Y-19 E.668 G3 X-19.952 Y-19.218 I.672 J-1.306 E.01182 G1 X-35 Y-4.17 E.6543 G1 X-35 Y-4.703 E.0164 G1 X-20.228 Y-19.475 E.64227 G3 X-20.467 Y-19.77 I1.001 J-1.054 E.0117 G1 X-35 Y-5.237 E.63189 G1 X-35 Y-5.77 E.0164 G1 X-20.662 Y-20.108 E.6234 G3 X-20.82 Y-20.484 I1.846 J-.999 E.01254 G1 X-35 Y-6.304 E.61652 G1 X-35 Y-6.597 E.009 G1 X-35.121 Y-6.717 E.00523 G1 X-20.923 Y-20.915 E.61731 G3 X-20.941 Y-21.43 I3.33 J-.379 E.01585 G1 X-35.741 Y-6.63 E.64346 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.933 Y-20.569 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X23.25 Y-59.752 E1.70361 G1 X22.716 Y-59.752 E.0164 G1 X-15.655 Y-21.38 E1.66835 G2 X-15.716 Y-21.854 I-1.828 J-.008 E.01471 G1 X22.183 Y-59.752 E1.64777 G1 X21.649 Y-59.752 E.0164 G1 X-15.838 Y-22.265 E1.6299 G2 X-16.012 Y-22.624 I-5.406 J2.386 E.01229 G1 X14.116 Y-52.752 E1.3099 G1 X13.582 Y-52.752 E.0164 G1 X-16.23 Y-22.94 E1.2962 G2 X-16.487 Y-23.216 I-1.179 J.837 E.01164 G1 X13.049 Y-52.752 E1.28417 G1 X12.515 Y-52.752 E.0164 G1 X-16.782 Y-23.455 E1.27379 G2 X-17.117 Y-23.654 I-.922 J1.172 E.012 G1 X11.981 Y-52.752 E1.26515 G1 X11.448 Y-52.752 E.0164 G1 X-17.496 Y-23.808 E1.25842 G2 X-17.927 Y-23.911 I-.604 J1.586 E.01366 G1 X10.914 Y-52.752 E1.25397 G1 X10.381 Y-52.752 E.0164 G1 X-18.637 Y-23.734 E1.26164 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.275 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.824 Y-22.08 E.67175 G3 X-19.092 Y-23.813 I2.492 J.759 E.07841 G1 X9.847 Y-52.752 E1.25824 G1 X9.314 Y-52.752 E.0164 G1 X-36.639 Y-6.8 E1.99794 G1 X-37.172 Y-6.8 E.0164 G1 X8.78 Y-52.752 E1.99794 G1 X8.247 Y-52.752 E.0164 G1 X-37.706 Y-6.8 E1.99794 G1 X-38.239 Y-6.8 E.0164 G1 X7.713 Y-52.752 E1.99794 G1 X7.179 Y-52.752 E.0164 G1 X-38.773 Y-6.8 E1.99794 G1 X-39.306 Y-6.8 E.0164 G1 X6.646 Y-52.752 E1.99794 G1 X6.452 Y-52.752 E.00596 G1 X6.452 Y-53.092 E.01044 G1 X-39.552 Y-7.088 E2.00018 G1 X-39.552 Y-7.621 E.0164 G1 X6.452 Y-53.625 E2.00018 G1 X6.452 Y-54.159 E.0164 G1 X-39.552 Y-8.155 E2.00018 G1 X-39.552 Y-8.688 E.0164 G1 X6.452 Y-54.692 E2.00018 G1 X6.452 Y-55.226 E.0164 G1 X-39.552 Y-9.222 E2.00018 G1 X-39.552 Y-9.756 E.0164 G1 X6.452 Y-55.759 E2.00018 G1 X6.452 Y-56.293 E.0164 G1 X-39.552 Y-10.289 E2.00018 G1 X-39.552 Y-10.823 E.0164 G1 X6.452 Y-56.826 E2.00018 G1 X6.452 Y-57.36 E.0164 G1 X-39.552 Y-11.356 E2.00018 G1 X-39.552 Y-11.89 E.0164 G1 X6.452 Y-57.894 E2.00018 G1 X6.452 Y-58.427 E.0164 G1 X-39.552 Y-12.423 E2.00018 G1 X-39.552 Y-12.957 E.0164 G1 X6.452 Y-58.961 E2.00018 G1 X6.452 Y-59.494 E.0164 G1 X-39.552 Y-13.49 E2.00018 G1 X-39.552 Y-14.024 E.0164 G1 X6.176 Y-59.752 E1.98818 G1 X5.642 Y-59.752 E.0164 G1 X-15.866 Y-38.244 E.93515 G3 X-17.256 Y-36.854 I-2.412 J-1.022 E.06195 G1 X-39.552 Y-14.558 E.96941 G1 X-39.552 Y-15.091 E.0164 G1 X-17.985 Y-36.658 E.93769 G3 X-18.525 Y-36.652 I-.292 J-2.045 E.01663 G1 X-39.552 Y-15.625 E.91424 G1 X-39.552 Y-16.158 E.0164 G1 X-18.983 Y-36.727 E.8943 G1 X-19.371 Y-36.872 E.01274 G1 X-39.552 Y-16.692 E.87743 G1 X-39.552 Y-17.225 E.0164 G1 X-19.721 Y-37.056 E.86222 G3 X-20.027 Y-37.284 I.713 J-1.275 E.01176 G1 X-39.552 Y-17.759 E.84893 G1 X-39.552 Y-18.293 E.0164 G1 X-20.294 Y-37.55 E.8373 G3 X-20.523 Y-37.855 I1.041 J-1.023 E.01175 G1 X-39.552 Y-18.826 E.82733 G1 X-39.552 Y-19.36 E.0164 G1 X-20.712 Y-38.199 E.81912 G3 X-20.856 Y-38.589 I1.409 J-.741 E.01281 G1 X-39.552 Y-19.893 E.81287 G1 X-39.552 Y-20.427 E.0164 G1 X-20.935 Y-39.044 E.80945 G3 X-20.932 Y-39.581 I2.04 J-.256 E.01655 G1 X-39.722 Y-20.791 E.81696 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.881 Y-38.762 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X5.109 Y-59.752 E.91259 G1 X4.575 Y-59.752 E.0164 G1 X-15.664 Y-39.513 E.87997 G2 X-15.739 Y-39.971 I-1.779 J.056 E.01433 G1 X4.042 Y-59.752 E.86004 G1 X3.508 Y-59.752 E.0164 G1 X-15.888 Y-40.356 E.8433 G2 X-16.068 Y-40.709 I-1.152 J.367 E.01224 G1 X2.975 Y-59.752 E.82796 G1 X2.441 Y-59.752 E.0164 G1 X-16.296 Y-41.015 E.81466 G2 X-16.562 Y-41.282 I-1.149 J.877 E.01163 G1 X1.907 Y-59.752 E.80304 G1 X1.374 Y-59.752 E.0164 G1 X-16.867 Y-41.511 E.79307 G2 X-17.214 Y-41.698 I-1.197 J1.811 E.01213 G1 X.84 Y-59.752 E.78496 G1 X.307 Y-59.752 E.0164 G1 X-17.611 Y-41.848 E.77873 G2 X-18.056 Y-41.923 I-.507 J1.654 E.01392 G1 X-.227 Y-59.752 E.77518 G1 X-.76 Y-59.752 E.0164 G1 X-18.806 Y-41.707 E.78458 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.124 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.306 Y-41.74 E.79051 G2 X-20.752 Y-40.294 I1 J2.446 E.06456 G1 X-39.552 Y-21.494 E.8174 G1 X-39.552 Y-22.027 E.0164 G1 X-1.827 Y-59.752 E1.64021 G1 X-2.361 Y-59.752 E.0164 G1 X-39.552 Y-22.561 E1.61701 G1 X-39.552 Y-23.095 E.0164 G1 X-2.895 Y-59.752 E1.59381 G1 X-3.428 Y-59.752 E.0164 G1 X-39.552 Y-23.628 E1.57061 G1 X-39.552 Y-24.162 E.0164 G1 X-3.962 Y-59.752 E1.54741 G1 X-4.495 Y-59.752 E.0164 G1 X-39.552 Y-24.695 E1.52421 G1 X-39.552 Y-25.229 E.0164 G1 X-5.029 Y-59.752 E1.50101 G1 X-5.562 Y-59.752 E.0164 G1 X-39.552 Y-25.762 E1.47782 G1 X-39.552 Y-26.296 E.0164 G1 X-6.096 Y-59.752 E1.45462 G1 X-6.63 Y-59.752 E.0164 G1 X-39.552 Y-26.83 E1.43142 G1 X-39.552 Y-27.363 E.0164 G1 X-7.163 Y-59.752 E1.40822 G1 X-7.697 Y-59.752 E.0164 G1 X-39.552 Y-27.897 E1.38502 G1 X-39.552 Y-28.43 E.0164 G1 X-8.23 Y-59.752 E1.36182 G1 X-8.764 Y-59.752 E.0164 G1 X-39.552 Y-28.964 E1.33862 G1 X-39.552 Y-29.497 E.0164 G1 X-9.297 Y-59.752 E1.31543 G1 X-9.831 Y-59.752 E.0164 G1 X-39.552 Y-30.031 E1.29223 G1 X-39.552 Y-30.564 E.0164 G1 X-10.364 Y-59.752 E1.26903 G1 X-10.898 Y-59.752 E.0164 G1 X-39.552 Y-31.098 E1.24583 G1 X-39.552 Y-31.632 E.0164 G1 X-11.432 Y-59.752 E1.22263 G1 X-11.965 Y-59.752 E.0164 G1 X-39.552 Y-32.165 E1.19943 G1 X-39.552 Y-32.699 E.0164 G1 X-12.499 Y-59.752 E1.17623 G1 X-13.032 Y-59.752 E.0164 G1 X-39.552 Y-33.232 E1.15304 G1 X-39.552 Y-33.766 E.0164 G1 X-13.566 Y-59.752 E1.12984 G1 X-14.099 Y-59.752 E.0164 G1 X-39.552 Y-34.299 E1.10664 G1 X-39.552 Y-34.833 E.0164 G1 X-14.633 Y-59.752 E1.08344 G1 X-15.167 Y-59.752 E.0164 G1 X-39.552 Y-35.367 E1.06024 G1 X-39.552 Y-35.9 E.0164 G1 X-15.7 Y-59.752 E1.03704 G1 X-16.234 Y-59.752 E.0164 G1 X-39.552 Y-36.434 E1.01384 G1 X-39.552 Y-36.967 E.0164 G1 X-16.767 Y-59.752 E.99065 G1 X-17.301 Y-59.752 E.0164 G1 X-39.552 Y-37.501 E.96745 G1 X-39.552 Y-38.034 E.0164 G1 X-17.834 Y-59.752 E.94425 G1 X-18.368 Y-59.752 E.0164 G1 X-39.552 Y-38.568 E.92105 G1 X-39.552 Y-39.102 E.0164 G1 X-18.901 Y-59.752 E.89785 G1 X-19.435 Y-59.752 E.0164 G1 X-39.552 Y-39.635 E.87465 G1 X-39.552 Y-40.169 E.0164 G1 X-19.969 Y-59.752 E.85145 G1 X-20.502 Y-59.752 E.0164 G1 X-27.052 Y-53.202 E.28477 G1 X-27.052 Y-52.752 E.01384 G1 X-27.502 Y-52.752 E.01384 G1 X-39.552 Y-40.702 E.5239 G1 X-39.552 Y-41.236 E.0164 G1 X-28.036 Y-52.752 E.50071 G1 X-28.569 Y-52.752 E.0164 G1 X-39.552 Y-41.769 E.47751 G1 X-39.552 Y-42.303 E.0164 G1 X-29.103 Y-52.752 E.45431 G1 X-29.636 Y-52.752 E.0164 G1 X-39.552 Y-42.836 E.43111 G1 X-39.552 Y-43.37 E.0164 G1 X-30.17 Y-52.752 E.40791 G1 X-30.704 Y-52.752 E.0164 G1 X-39.552 Y-43.904 E.38471 G1 X-39.552 Y-44.437 E.0164 G1 X-31.237 Y-52.752 E.36151 G1 X-31.771 Y-52.752 E.0164 G1 X-39.552 Y-44.971 E.33832 G1 X-39.552 Y-45.504 E.0164 G1 X-32.304 Y-52.752 E.31512 G1 X-32.838 Y-52.752 E.0164 G1 X-39.552 Y-46.038 E.29192 G1 X-39.552 Y-46.571 E.0164 G1 X-33.371 Y-52.752 E.26872 G1 X-33.905 Y-52.752 E.0164 G1 X-39.552 Y-47.105 E.24552 G1 X-39.552 Y-47.639 E.0164 G1 X-34.439 Y-52.752 E.22232 G1 X-34.972 Y-52.752 E.0164 G1 X-39.552 Y-48.172 E.19912 G1 X-39.552 Y-48.706 E.0164 G1 X-35.506 Y-52.752 E.17593 G1 X-35.548 Y-52.752 E.00131 G1 X-35.548 Y-53.243 E.0151 G1 X-39.552 Y-49.239 E.17408 G1 X-39.552 Y-49.773 E.0164 G1 X-35.548 Y-53.777 E.17408 G1 X-35.548 Y-54.31 E.0164 G1 X-39.552 Y-50.306 E.17408 G1 X-39.552 Y-50.84 E.0164 G1 X-35.548 Y-54.844 E.17408 G1 X-35.548 Y-55.377 E.0164 G1 X-39.552 Y-51.373 E.17408 G1 X-39.552 Y-51.907 E.0164 G1 X-35.548 Y-55.911 E.17408 G1 X-35.548 Y-56.444 E.0164 G1 X-39.744 Y-52.248 E.18245 G1 X-40.278 Y-52.248 E.0164 G1 X-35.548 Y-56.978 E.20565 G1 X-35.548 Y-57.512 E.0164 G1 X-40.812 Y-52.248 E.22885 G1 X-41.345 Y-52.248 E.0164 G1 X-35.548 Y-58.045 E.25204 G1 X-35.548 Y-58.579 E.0164 G1 X-41.879 Y-52.248 E.27524 G1 X-42.412 Y-52.248 E.0164 G1 X-35.548 Y-59.112 E.29844 G1 X-35.548 Y-59.646 E.0164 G1 X-42.946 Y-52.248 E.32164 G1 X-43.479 Y-52.248 E.0164 G1 X-35.976 Y-59.752 E.32626 G1 X-36.509 Y-59.752 E.0164 G1 X-44.013 Y-52.248 E.32626 G1 X-44.546 Y-52.248 E.0164 G1 X-37.043 Y-59.752 E.32626 G1 X-37.576 Y-59.752 E.0164 G1 X-45.08 Y-52.248 E.32626 G1 X-45.614 Y-52.248 E.0164 G1 X-38.11 Y-59.752 E.32626 G1 X-38.643 Y-59.752 E.0164 G1 X-46.147 Y-52.248 E.32626 G1 X-46.681 Y-52.248 E.0164 G1 X-39.177 Y-59.752 E.32626 G1 X-39.71 Y-59.752 E.0164 G1 X-47.214 Y-52.248 E.32626 G1 X-47.748 Y-52.248 E.0164 G1 X-40.244 Y-59.752 E.32626 G1 X-40.778 Y-59.752 E.0164 G1 X-48.281 Y-52.248 E.32626 G1 X-48.815 Y-52.248 E.0164 G1 X-41.311 Y-59.752 E.32626 G1 X-41.845 Y-59.752 E.0164 G1 X-49.349 Y-52.248 E.32626 G1 X-49.882 Y-52.248 E.0164 G1 X-42.378 Y-59.752 E.32626 G1 X-42.912 Y-59.752 E.0164 G1 X-50.416 Y-52.248 E.32626 G1 X-50.949 Y-52.248 E.0164 G1 X-43.445 Y-59.752 E.32626 G1 X-43.979 Y-59.752 E.0164 G1 X-51.483 Y-52.248 E.32626 G1 X-51.552 Y-52.248 E.00213 G1 X-51.552 Y-52.713 E.01428 G1 X-44.513 Y-59.752 E.30606 G1 X-45.046 Y-59.752 E.0164 G1 X-51.552 Y-53.246 E.28286 G1 X-51.552 Y-53.78 E.0164 G1 X-45.58 Y-59.752 E.25967 G1 X-46.113 Y-59.752 E.0164 G1 X-51.552 Y-54.313 E.23647 G1 X-51.552 Y-54.847 E.0164 G1 X-46.647 Y-59.752 E.21327 G1 X-47.18 Y-59.752 E.0164 G1 X-51.552 Y-55.38 E.19007 G1 X-51.552 Y-55.914 E.0164 G1 X-47.714 Y-59.752 E.16687 G1 X-48.247 Y-59.752 E.0164 G1 X-51.552 Y-56.447 E.14367 G1 X-51.552 Y-56.981 E.0164 G1 X-48.781 Y-59.752 E.12047 G1 X-49.315 Y-59.752 E.0164 G1 X-51.552 Y-57.515 E.09728 G1 X-51.552 Y-58.048 E.0164 G1 X-49.848 Y-59.752 E.07408 G1 X-50.382 Y-59.752 E.0164 G1 X-51.552 Y-58.582 E.05088 G1 X-51.552 Y-59.115 E.0164 G1 X-50.746 Y-59.922 E.03506 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.552 Y-59.115 G1 X-51.552 Y-58.582 G1 X-51.321 Y-58.812 ;WIPE_END G1 X-43.863 Y-57.189 Z2.8 F30000 G1 X-27.222 Y-53.566 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-21.036 Y-59.752 E.26895 G1 X-21.569 Y-59.752 E.0164 G1 X-27.052 Y-54.269 E.23838 G1 X-27.052 Y-54.803 E.0164 G1 X-22.103 Y-59.752 E.21518 G1 X-22.636 Y-59.752 E.0164 G1 X-27.052 Y-55.336 E.19198 G1 X-27.052 Y-55.87 E.0164 G1 X-23.17 Y-59.752 E.16878 G1 X-23.704 Y-59.752 E.0164 G1 X-27.052 Y-56.404 E.14558 G1 X-27.052 Y-56.937 E.0164 G1 X-24.237 Y-59.752 E.12238 G1 X-24.771 Y-59.752 E.0164 G1 X-27.052 Y-57.471 E.09918 G1 X-27.052 Y-58.004 E.0164 G1 X-25.304 Y-59.752 E.07599 G1 X-25.838 Y-59.752 E.0164 G1 X-27.052 Y-58.538 E.05279 G1 X-27.052 Y-59.071 E.0164 G1 X-26.202 Y-59.922 E.03697 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-27.052 Y-59.071 G1 X-27.052 Y-58.538 G1 X-26.865 Y-58.725 ;WIPE_END G1 X-19.294 Y-57.759 Z2.8 F30000 G1 X14.778 Y-53.415 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.116 Y-59.752 E.27554 G1 X20.582 Y-59.752 E.0164 G1 X14.948 Y-54.118 E.24496 G1 X14.948 Y-54.651 E.0164 G1 X20.049 Y-59.752 E.22176 G1 X19.515 Y-59.752 E.0164 G1 X14.948 Y-55.185 E.19856 G1 X14.948 Y-55.719 E.0164 G1 X18.981 Y-59.752 E.17537 G1 X18.448 Y-59.752 E.0164 G1 X14.948 Y-56.252 E.15217 G1 X14.948 Y-56.786 E.0164 G1 X17.914 Y-59.752 E.12897 G1 X17.381 Y-59.752 E.0164 G1 X14.948 Y-57.319 E.10577 G1 X14.948 Y-57.853 E.0164 G1 X16.847 Y-59.752 E.08257 G1 X16.314 Y-59.752 E.0164 G1 X14.948 Y-58.386 E.05937 G1 X14.948 Y-58.92 E.0164 G1 X15.78 Y-59.752 E.03617 G1 X15.247 Y-59.752 E.0164 G1 X14.778 Y-59.284 E.02035 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.549 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X6.851 Y-60 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.851 Y-60 ;WIPE_END G1 X16.041 Y-57.437 Z2.8 F30000 G1 X29.923 Y-52.487 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.505735 G1 F15000 G1 X30.713 Y-52.487 E.0298 G1 X30.713 Y-53.277 E.0298 G1 X29.951 Y-52.515 E.04063 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.713 Y-53.277 G1 X30.713 Y-52.487 G1 X30.58 Y-52.487 ;WIPE_END G1 X28.441 Y-45.161 Z2.8 F30000 G1 X17.238 Y-6.8 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X18.756 Y-6.8 E.04665 G1 X18.756 Y-8.318 E.04665 G1 X17.266 Y-6.828 E.06474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.343 Y-7.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.555122 G1 F14941.49 G2 X18.355 Y-7.21 I-.031 J.05 E.01114 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.792 Y-5.109 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.792 Y-3.48 E.05401 G1 X14.854 Y-3.416 E.00298 G3 X14.967 Y-1.778 I-1.469 J.924 E.05673 G1 X14.792 Y-1.575 E.00889 G1 X14.792 Y1.761 E.11064 G1 X14.854 Y1.826 E.00298 G3 X14.967 Y3.464 I-1.469 J.924 E.05673 G1 X14.792 Y3.667 E.00889 G1 X14.792 Y7.002 E.11064 G1 X14.854 Y7.067 E.00298 G3 X14.967 Y8.705 I-1.469 J.924 E.05673 G1 X14.792 Y8.908 E.00889 G1 X14.792 Y12.243 E.11064 G1 X14.854 Y12.308 E.00298 G3 X14.967 Y13.946 I-1.469 J.924 E.05673 G1 X14.792 Y14.149 E.00889 G1 X14.792 Y17.485 E.11064 G1 X15.126 Y18.205 E.02633 G1 X15.122 Y18.408 E.00673 G1 X17.663 Y18.408 E.08427 G1 X17.747 Y18.205 E.00729 G1 X17.734 Y17.55 E.02174 G2 X16.679 Y16.239 I-3.397 J1.655 E.05627 G3 X16.566 Y14.601 I1.469 J-.924 E.05673 G3 X17.475 Y13.619 I9.772 J8.124 E.04442 G2 X17.588 Y11.981 I-1.469 J-.924 E.05673 G2 X16.679 Y10.998 I-9.772 J8.125 E.04442 G3 X16.566 Y9.36 I1.469 J-.924 E.05673 G3 X17.475 Y8.377 I9.772 J8.124 E.04442 G2 X17.588 Y6.739 I-1.469 J-.924 E.05673 G2 X16.679 Y5.757 I-9.772 J8.125 E.04442 G3 X16.566 Y4.119 I1.469 J-.924 E.05673 G3 X17.475 Y3.136 I9.772 J8.124 E.04442 G2 X17.588 Y1.498 I-1.469 J-.924 E.05673 G2 X16.679 Y.515 I-9.772 J8.125 E.04442 G3 X16.566 Y-1.123 I1.469 J-.924 E.05673 G3 X17.475 Y-2.105 I9.772 J8.125 E.04442 G2 X17.588 Y-3.743 I-1.469 J-.924 E.05673 G2 X16.679 Y-4.726 I-9.772 J8.125 E.04442 G3 X16.566 Y-6.364 I1.469 J-.924 E.05673 G1 X16.604 Y-6.408 E.00192 G1 X18.937 Y-6.408 E.07739 G1 X18.937 Y-4.737 E.05542 G1 X19.041 Y-4.737 E.00344 G2 X19.469 Y-4.071 I1.646 J-.588 E.0265 G1 X20.096 Y-3.416 E.03008 G3 X20.208 Y-1.778 I-1.469 J.924 E.05673 G3 X19.3 Y-.795 I-9.772 J-8.124 E.04442 G2 X19.187 Y.843 I1.469 J.924 E.05673 G2 X20.096 Y1.826 I9.772 J-8.125 E.04442 G3 X20.208 Y3.464 I-1.469 J.924 E.05673 G3 X19.3 Y4.446 I-9.772 J-8.125 E.04442 G2 X19.187 Y6.084 I1.469 J.924 E.05673 G2 X20.096 Y7.067 I9.772 J-8.125 E.04442 G3 X20.208 Y8.705 I-1.469 J.924 E.05673 G3 X19.3 Y9.688 I-9.772 J-8.124 E.04442 G2 X19.187 Y11.326 I1.469 J.924 E.05673 G2 X20.096 Y12.308 I9.772 J-8.125 E.04442 G3 X20.208 Y13.946 I-1.469 J.924 E.05673 G3 X19.3 Y14.929 I-9.772 J-8.124 E.04442 G2 X19.187 Y16.567 I1.469 J.924 E.05673 G2 X20.096 Y17.55 I9.772 J-8.125 E.04442 G1 X20.368 Y18.205 E.02353 G1 X20.364 Y18.408 E.00673 G1 X21.258 Y18.408 E.02966 G1 X21.258 Y17.674 E.02435 G1 X26.463 Y17.562 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.406586 G1 F15000 G1 X27.048 Y17.562 E.01734 G1 X27.105 Y17.415 E.00466 ;WIDTH:0.413141 G1 X27.168 Y17.374 E.00227 ;WIDTH:0.443595 G1 X27.231 Y17.333 E.00245 ;WIDTH:0.480632 G1 X27.462 Y17.311 E.00828 ;WIDTH:0.543084 G1 X27.693 Y17.289 E.00946 G1 X27.693 Y16.43 E.03501 G1 X27.263 Y16.86 E.02475 ;WIDTH:0.521374 G1 X27.127 Y16.961 E.00663 ;WIDTH:0.47199 G1 X26.991 Y17.063 E.00595 ;WIDTH:0.410126 G1 X26.854 Y17.164 E.00509 G1 X26.491 Y17.534 E.01549 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y32.256 E.57795 G1 X26.962 Y37.465 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.601656 G1 F13697.096 G1 X27.021 Y37.388 E.00445 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.368 Y36.965 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.493008 G1 F15000 G1 X27.207 Y37.16 E.0093 ;WIDTH:0.540583 G1 X27.046 Y37.356 E.01028 G1 X27.231 Y37.306 E.00777 ;WIDTH:0.481479 G1 X27.732 Y37.328 E.01792 G1 X27.732 Y36.601 E.02597 G1 X27.396 Y36.936 E.01694 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X27.39 Y59.19 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.397572 G1 F15000 G2 X27.383 Y58.547 I-4.888 J-.268 E.0186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.311 Y56.28 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.554986 G1 F14945.459 G1 X26.707 Y56.884 E.03566 G1 X26.857 Y57.065 E.00981 G1 X27.204 Y57.666 E.02896 G1 X27.267 Y57.819 E.0069 ;WIDTH:0.531954 G1 F15000 G1 X27.305 Y58.048 E.00926 ;WIDTH:0.485888 G1 X27.343 Y58.278 E.00839 ;WIDTH:0.439823 G1 X27.38 Y58.507 E.00752 G1 X27.357 Y58.276 E.00752 ;WIDTH:0.485888 G1 X27.334 Y58.044 E.00839 ;WIDTH:0.54878 G1 X27.311 Y57.813 E.00958 G1 X27.311 Y56.32 E.06154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.756 Y55.207 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.078 Y56.885 E.07291 G1 X26.442 Y57.248 E.01581 G1 X26.819 Y57.888 E.02283 G1 X27.018 Y58.604 E.02282 G3 X26.983 Y59.556 I-3.859 J.335 E.02933 G1 X27.756 Y59.556 E.02375 G1 X27.756 Y55.247 E.1324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X27.756 Y57.247 ;WIPE_END G1 X25.779 Y49.875 Z2.8 F30000 G1 X14.585 Y8.117 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42 G1 F15000 G1 X14.514 Y8.158 E.00251 G1 X14.588 Y8.193 E.00252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.104 Y4.267 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419998 G1 F15000 G1 X13.618 Y3.753 E.02234 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.659 Y4.178 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X12.829 Y4.638 E.01506 G1 X12.879 Y5.024 E.01197 G1 X14 Y3.903 E.04871 G1 X14.023 Y2.814 E.03348 G1 X12.687 Y4.15 E.05806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.214 Y4.09 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X12.442 Y4.64 E.01829 G1 X12.545 Y5.375 E.02282 G1 X12.474 Y5.963 E.01818 G1 X14.267 Y4.17 E.07789 G1 X14.4 Y4.17 E.0041 G1 X14.4 Y1.904 E.06964 G1 X12.242 Y4.062 E.09377 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X13.657 Y2.647 ;WIPE_END G1 X8.901 Y8.011 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X8.838 Y8.048 E.00204 G1 X8.903 Y8.082 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.65 Y1.453 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X21.65 Y5.32 E.1188 G1 X24.203 Y2.766 E.11096 G1 X23.795 Y2.431 E.01623 G1 X23.367 Y1.915 E.0206 G1 X23.048 Y1.326 E.0206 G1 X22.85 Y.685 E.0206 G1 X22.819 Y.417 E.00829 G1 X21.783 Y1.453 E.04504 G1 X21.69 Y1.453 E.00287 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.05 Y1.72 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X22.027 Y2.31 E.01813 G1 X22.027 Y4.409 E.06452 G1 X23.642 Y2.794 E.0702 G3 X22.715 Y1.504 I2.879 J-3.047 E.04912 G1 X22.602 Y1.168 E.01088 G1 X22.078 Y1.692 E.02277 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.46 Y1.946 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.532513 G1 F15000 G1 X22.46 Y3.363 E.05654 G1 X23.035 Y2.788 E.03243 G1 X22.632 Y2.267 E.02631 G1 X22.479 Y1.981 E.01291 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.775 Y-3.021 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.423568 G1 F15000 G1 X27.488 Y-4.734 E.07514 G1 X26.95 Y-4.734 E.0167 G1 X25.042 Y-2.826 E.08371 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.179 Y-.425 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.667 Y1.087 E.0663 G1 X21.667 Y.591 E.01537 G1 X21.65 Y.566 E.00095 G1 X23.374 Y-1.158 E.07564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y.197 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X26.412 Y-4.734 E.21633 G1 X25.873 Y-4.734 E.0167 G1 X21.65 Y-.511 E.18528 G1 X21.65 Y-1.049 E.0167 G1 X25.335 Y-4.734 E.16166 G1 X24.797 Y-4.734 E.0167 G1 X21.65 Y-1.587 E.13805 G1 X21.65 Y-2.126 E.0167 G1 X24.258 Y-4.734 E.11443 G1 X23.72 Y-4.734 E.0167 G1 X21.65 Y-2.664 E.09082 G1 X21.65 Y-3.202 E.0167 G1 X23.182 Y-4.734 E.06721 G1 X22.644 Y-4.734 E.0167 G1 X21.65 Y-3.741 E.04359 G1 X21.65 Y-4.279 E.0167 G1 X22.275 Y-4.904 E.02742 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.617 Y-3.381 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.885 Y-3.35 E.00829 G1 X27.492 Y-3.167 E.01947 G1 X27.756 Y-3.031 E.00913 G1 X27.756 Y-4.519 E.04574 G1 X26.645 Y-3.409 E.04826 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.399 Y-3.642 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427552 G1 F15000 G1 X27.327 Y-3.6 E.00261 G1 X27.403 Y-3.565 E.00262 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393959 G1 F12000 G3 X28.611 Y-.863 I-8.109 J1.761 E.0117 ;WIDTH:0.344558 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.307221 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276407 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.30549 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342224 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385475 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409513 G1 X28.535 Y1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.591 Y.981 ;WIPE_END G1 X23.438 Y-4.65 Z2.8 F30000 G1 X-26.895 Y-59.653 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-26.959 Y-59.616 E.00204 G1 X-26.894 Y-59.581 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.451 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-35.149 Y-60 E.19 G1 X-51.404 Y-59.662 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-51.467 Y-59.625 E.00204 G1 X-51.402 Y-59.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.467 Y-59.625 G1 X-51.404 Y-59.662 ;WIPE_END G1 X-49.615 Y-52.242 Z2.8 F30000 G1 X-42.652 Y-23.367 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:2.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z3 I-.257 J1.189 P1 F30000 G1 X49.503 Y-1.659 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.55 Y-1.668 E.00161 G1 X50 Y-1.758 E.01521 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.464 Y-1.651 E.0046 G1 X49.588 Y-1.232 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.635 Y-1.242 E.00149 G1 X50 Y-1.314 E.01143 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.548 Y-1.224 E.00161 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.635 Y-1.242 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.214 Y-.502 ;WIPE_END G1 X50.42 Y-2.111 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50 Y-2.152 I-.419 J2.105 E.43341 G1 X50.38 Y-2.114 E.01267 G1 X50.466 Y-2.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.484 Y-2.541 E.00054 G1 X50.991 Y-2.392 E.01624 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.426 Y-2.547 E.01317 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.484 Y-2.541 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.084 Y-1.522 ;WIPE_END G1 X44.495 Y-.702 Z3 F30000 G1 X28.094 Y1.07 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X28.015 Y1.213 E.005 G3 X26.2 Y2.185 I-1.818 J-1.213 E.06589 G3 X25.986 Y-2.175 I.003 J-2.185 E.2042 G3 X28.217 Y.835 I.212 J2.175 E.13832 G1 X28.112 Y1.035 E.00692 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.015 Y1.213 G1 X27.745 Y1.545 G1 X27.414 Y1.817 G1 X27.036 Y2.019 G1 X26.626 Y2.143 G1 X26.543 Y2.151 ;WIPE_END G1 X19.094 Y.489 Z3 F30000 G1 X7.71 Y-2.052 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.147 J2.165 E.33451 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.267 J2.029 E.2488 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.566 Y4.257 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.718 Y4.121 E.0063 G3 X9.084 Y3.912 I.974 J1.28 E.01296 G3 X9.534 Y3.8 I.666 J1.721 E.01429 G3 X8.536 Y4.283 I.158 J1.6 E.27571 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.718 Y4.121 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.283 Y3.844 G1 X9.534 Y3.8 G1 X9.7 Y3.79 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.356 Y3.932 G1 X10.38 Y3.944 ;WIPE_END G1 X3.172 Y6.452 Z3 F30000 G1 X-16.248 Y13.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.147 J-2.165 E.33451 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.584 J-1.473 E.06687 G3 X-29.054 Y3.776 I.27 J-2.028 E.24849 G1 X-28.745 Y4.048 E.01364 G1 X-28.745 Y-1.645 E.18884 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.463 Y8.978 Z3 F30000 G1 X-29.163 Y6.54 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.323 Y6.674 E.00639 G3 X-30.916 Y3.912 I-.985 J-1.272 E.16871 G3 X-30.466 Y3.8 I.666 J1.721 E.01429 G3 X-29.142 Y6.51 I.158 J1.601 E.12012 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.323 Y6.674 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.956 Y6.868 G1 X-30.981 Y6.856 ;WIPE_END G1 X-27.476 Y.076 Z3 F30000 G1 X-15.998 Y-22.126 Z3 G1 Z2.6 G1 E.8 F1800 M73 P43 R46 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.94 Y-21.921 E.0071 G3 X-19.794 Y-23.235 I-2.368 J.635 E.35159 G3 X-18.521 Y-23.728 I1.512 J2.016 E.04585 G3 X-16.042 Y-22.223 I.213 J2.442 E.10292 G1 X-16.015 Y-22.163 E.0022 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.384 Y-21.996 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.328 Y-21.817 E.00622 G3 X-17.586 Y-19.374 I-1.973 J.529 E.09996 G3 X-18.494 Y-23.322 I-.714 J-1.914 E.23064 G3 X-16.413 Y-22.07 I.193 J2.034 E.08627 G1 X-16.399 Y-22.033 E.00132 G1 X-16.796 Y-21.856 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.754 Y-21.702 E.00489 G3 X-18.916 Y-22.776 I-1.554 J.416 E.22672 G3 X-18.466 Y-22.888 I.666 J1.721 E.01429 G3 X-16.821 Y-21.901 I.158 J1.601 E.06316 G1 X-16.815 Y-21.891 E.00036 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.754 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.832 Y-20.632 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.249 Y-20.072 ;WIPE_END G1 X-18.327 Y-27.628 Z3 F30000 G1 X-20.21 Y-40.824 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.036 Y-41.024 E.00879 G3 X-19.794 Y-41.235 I1.729 J1.739 E.01066 G3 X-18.521 Y-41.728 I1.512 J2.016 E.04585 G3 X-20.249 Y-40.783 I.213 J2.443 E.44382 G1 X-20.237 Y-40.795 E.00054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.904 Y-40.556 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.745 Y-40.733 E.00789 G3 X-18.494 Y-41.322 I1.445 J1.445 E.04676 G3 X-17.452 Y-41.146 I.19 J2.061 E.03547 G3 X-17.586 Y-37.374 I-.85 J1.858 E.15963 G3 X-19.927 Y-40.523 I-.714 J-1.914 E.17466 G1 X-19.577 Y-40.269 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.441 Y-40.429 E.00645 G3 X-18.916 Y-40.776 I1.133 J1.142 E.01945 G3 X-18.466 Y-40.888 I.666 J1.722 E.01429 G3 X-19.602 Y-40.242 I.158 J1.601 E.26919 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.441 Y-40.429 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.717 Y-40.844 G1 X-18.466 Y-40.888 G1 X-18.3 Y-40.899 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.82 Y-40.82 ;WIPE_END G1 X-20.316 Y-33.608 Z3 F30000 G1 X-42.748 Y31.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z3 F30000 G1 X-42.748 Y51.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z3 F30000 G1 X4.752 Y47.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z3 F30000 G1 X4.752 Y33.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z3 F30000 G1 X27.252 Y31.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z3 F30000 G1 X-28.09 Y-52.948 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 M73 P43 R45 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45573 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.944 E.31992 G1 X-42.535 Y59.948 E2.13862 G2 X-42.501 Y58.155 I-2.276 J-.941 E.06089 G2 X-47.065 Y59.948 I-2.302 J.847 E.25912 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45573 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z3 F30000 G1 X7.055 Y-53.79 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z3 F30000 G1 X-40.155 Y-5.355 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.186 J1.445 E.44457 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X26.114 Y58.286 I-1.62 J-1.351 E.07295 G2 X23.486 Y57.086 I-1.914 J.714 E.10645 G2 X22.428 Y60.023 I.732 J1.923 E.11756 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-45.514 Y57.086 I-1.447 J1.464 E.07743 G2 X-46.714 Y59.714 I.714 J1.914 E.10645 G2 X-46.351 Y60.355 I2.389 J-.932 E.02452 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.186 J-1.445 E.44457 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.29 Y-2.763 Z3 F30000 G1 X-48.799 Y-.873 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.615 Y-1.213 E.01187 G3 X-47.014 Y-2.175 I1.818 J1.213 E.0593 G3 X-46.8 Y2.185 I.212 J2.175 E.21737 G3 X-48.817 Y-.835 I.003 J-2.185 E.13173 G1 X-48.816 Y-.837 E.00005 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.615 Y-1.213 G1 X-48.345 Y-1.545 G1 X-48.014 Y-1.817 G1 X-47.636 Y-2.019 G1 X-47.434 Y-2.091 G1 X-47.361 Y-2.106 ;WIPE_END G1 X-47.218 Y5.525 Z3 F30000 G1 X-46.196 Y59.803 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.303 Y59.575 E.00774 G3 X-45.217 Y57.444 I1.503 J-.576 E.08282 G1 X-45.01 Y57.403 E.00647 G3 X-46.175 Y59.836 I.21 J1.596 E.21244 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.303 Y59.575 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.268 Y58.344 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.033 Y57.968 ;WIPE_END G1 X-38.403 Y58.172 Z3 F30000 G1 X22.804 Y59.803 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.715 Y59.615 E.00639 G3 X23.99 Y57.403 I1.489 J-.615 E.09055 G3 X24.2 Y60.61 I.207 J1.597 E.16172 G3 X22.826 Y59.835 I.004 J-1.611 E.05066 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.715 Y59.615 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.968 Y57.968 ;WIPE_END G1 X17.579 Y52.563 Z3 F30000 G1 X-40.59 Y-5.79 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-41.858 Y-3.885 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.858 Y-4.737 E.02827 G1 X-41.079 Y-4.726 E.02584 G3 X-40.052 Y-3.416 I-39.155 J31.749 E.05523 G3 X-40.598 Y-1.45 I-1.705 J.585 E.07193 G1 X-41.103 Y-.795 E.02744 G2 X-40.557 Y1.171 I1.705 J.585 E.07193 G1 X-40.052 Y1.826 E.02744 G3 X-40.598 Y3.791 I-1.705 J.585 E.07193 G1 X-41.103 Y4.446 E.02744 G2 X-40.557 Y6.412 I1.705 J.585 E.07193 G1 X-40.052 Y7.067 E.02744 G3 X-40.598 Y9.032 I-1.705 J.585 E.07193 G1 X-41.103 Y9.688 E.02744 G2 X-40.557 Y11.653 I1.705 J.585 E.07193 G1 X-40.052 Y12.308 E.02744 G3 X-40.598 Y14.274 I-1.705 J.585 E.07193 G1 X-41.103 Y14.929 E.02744 G2 X-40.557 Y16.894 I1.705 J.585 E.07193 G1 X-40.052 Y17.55 E.02744 G1 X-39.922 Y18.205 E.02216 G1 X-39.97 Y18.408 E.00691 G1 X-37.342 Y18.408 E.08718 G1 X-37.301 Y18.205 E.00686 G1 X-37.455 Y17.55 E.02232 G3 X-38.482 Y16.239 I39.159 J-31.752 E.05523 G3 X-37.936 Y14.274 I1.705 J-.585 E.07193 G1 X-37.431 Y13.619 E.02744 G2 X-37.977 Y11.653 I-1.705 J-.585 E.07193 G1 X-38.482 Y10.998 E.02744 G3 X-37.936 Y9.032 I1.705 J-.585 E.07193 G1 X-37.431 Y8.377 E.02744 G2 X-37.977 Y6.412 I-1.705 J-.585 E.07193 G1 X-38.482 Y5.757 E.02744 G3 X-37.936 Y3.791 I1.705 J-.585 E.07193 G1 X-37.431 Y3.136 E.02744 G2 X-37.977 Y1.171 I-1.705 J-.585 E.07193 G1 X-38.482 Y.515 E.02744 G3 X-37.936 Y-1.45 I1.705 J-.585 E.07193 G1 X-37.431 Y-2.105 E.02744 G2 X-37.977 Y-4.071 I-1.705 J-.585 E.07193 G1 X-38.482 Y-4.726 E.02744 G3 X-38.162 Y-6.408 I1.55 J-.576 E.05969 G1 X-35.575 Y-6.408 E.08581 G1 X-35.861 Y-6.036 E.01555 G2 X-35.392 Y-4.167 I1.641 J.581 E.06773 G1 X-35.392 Y-1.404 E.09167 G1 X-35.861 Y-.795 E.0255 G2 X-35.392 Y1.074 I1.641 J.581 E.06773 G1 X-35.392 Y3.837 E.09167 G1 X-35.861 Y4.446 E.0255 G2 X-35.392 Y6.315 I1.641 J.581 E.06773 G1 X-35.392 Y9.079 E.09167 G1 X-35.861 Y9.688 E.0255 G2 X-35.392 Y11.557 I1.641 J.581 E.06773 G1 X-35.392 Y14.32 E.09167 G1 X-35.861 Y14.929 E.0255 G2 X-35.392 Y16.798 I1.641 J.581 E.06773 G1 X-35.411 Y18.408 E.0534 G1 X-29.534 Y8.111 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.398919 G1 F15000 G1 X-29.95 Y8.214 E.01245 G1 X-30.088 Y8.216 E.00401 G1 X-29.534 Y8.77 E.02276 G1 X-29.534 Y8.151 E.01798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-29.534 Y8.77 G1 X-30.088 Y8.216 G1 X-29.95 Y8.214 G1 X-29.534 Y8.111 ;WIPE_END G1 X-34.246 Y2.977 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419998 G1 F15000 G1 X-33.513 Y3.71 E.03186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.013 Y3.676 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-34.623 Y2.066 E.06995 G1 X-34.623 Y3.133 E.03277 G1 X-33.352 Y4.404 E.05523 G1 X-33.125 Y3.854 E.01827 G1 X-33.035 Y3.71 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.517 Y3.639 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-35 Y1.156 E.10792 G1 X-35 Y3.422 E.06964 G1 X-34.867 Y3.422 E.0041 G1 X-33.118 Y5.171 E.07599 G1 X-33.042 Y4.64 E.01649 G1 X-32.776 Y3.999 E.02132 G1 X-32.54 Y3.672 E.01239 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.048 Y1.973 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.575 G1 F14383.291 G2 X-43.035 Y2.065 I-.033 J.052 E.01208 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.639 Y.448 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.429026 G1 F15000 G1 X-42.998 Y.108 E.01554 G1 X-43.051 Y.688 E.01831 G1 X-43.273 Y1.401 E.02351 G1 X-43.645 Y2.11 E.02519 G1 X-42.627 Y3.128 E.0453 G2 X-42.639 Y.488 I-300.525 J.083 E.08308 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.25 Y.172 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-42.383 Y.172 E.0041 G1 X-43.541 Y-.985 E.0503 G1 X-43.442 Y-.649 E.01076 G1 X-43.38 Y-.018 E.01947 G3 X-43.633 Y1.292 I-3.815 J-.058 E.04121 G1 X-43.946 Y1.885 E.0206 G1 X-44.146 Y2.142 E.01002 G1 X-42.25 Y4.038 E.0824 G1 X-42.25 Y.212 E.11757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.815 Y-3.259 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-47.111 Y-4.556 E.05633 G1 X-48.356 Y-4.556 E.03824 G1 X-48.356 Y-3.031 E.04686 G1 X-48.092 Y-3.167 E.00913 G1 X-47.485 Y-3.35 E.01947 G1 X-46.818 Y-3.42 E.0206 G1 X-46.151 Y-3.358 E.0206 G1 X-45.853 Y-3.271 E.00953 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.911 Y-3.803 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.460853 G1 F15000 G1 X-47.273 Y-4.165 E.01742 G1 X-47.949 Y-4.149 E.02302 G1 X-47.949 Y-3.635 E.01748 G3 X-46.951 Y-3.8 I1.033 J3.16 E.03456 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.135 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409511 G1 F12000 G1 X-49.191 Y-.981 E.00864 ;WIDTH:0.385473 G1 X-49.211 Y-.863 E.00334 ;WIDTH:0.342224 G1 X-49.234 Y-.731 E.00326 ;WIDTH:0.305489 G1 X-49.248 Y-.613 E.00254 ;WIDTH:0.275112 G1 X-49.264 Y-.485 E.00245 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00748 G1 X-49.263 Y.495 E.00752 ;WIDTH:0.276405 G1 X-49.248 Y.613 E.00226 ;WIDTH:0.307219 G1 X-49.232 Y.745 E.00286 ;WIDTH:0.344557 G1 X-49.211 Y.863 E.00294 ;WIDTH:0.393959 G2 X-49.135 Y1.264 I8.18 J-1.359 E.0117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.211 Y.863 ;WIPE_END G1 X-42.411 Y-2.602 Z3 F30000 G1 X-42.081 Y-2.77 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.432571 G1 F15000 G1 X-44.063 Y-4.752 E.08901 G1 X-44.161 Y-4.752 E.0031 G1 X-44.178 Y-4.734 E.00079 G1 X-44.597 Y-4.734 E.01328 G1 X-42.267 Y-2.405 E.1046 G1 X-42.267 Y-1.854 E.0175 G1 X-45.148 Y-4.734 E.12935 G1 X-45.699 Y-4.734 E.0175 G1 X-42.267 Y-1.303 E.15409 G1 X-42.267 Y-.752 E.0175 G1 X-46.25 Y-4.734 E.17884 G1 X-46.801 Y-4.734 E.0175 G1 X-42.125 Y-.059 E.20995 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.321 Y-3.599 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.562004 G1 F14743.398 G1 X-42.321 Y-4.485 E.03748 G1 X-43.207 Y-4.485 E.03748 G1 X-42.349 Y-3.627 E.05132 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.426 Y17.407 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-48.489 Y17.443 E.00204 G1 X-48.424 Y17.478 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-47.991 Y59.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.414033 G1 F15000 G1 X-47.973 Y58.733 E.01387 ;WIDTH:0.432845 G1 X-47.955 Y58.275 E.01457 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.595 Y55.762 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.43262 G1 F15000 G1 X-47.595 Y56.755 E.03153 G1 X-47.257 Y56.367 E.01632 G1 X-47.106 Y56.251 E.00606 G1 X-47.567 Y55.79 E.02071 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.979 Y54.836 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.423264 G1 F15000 G2 X-47.964 Y58.078 I73.769 J1.274 E.10048 ;WIDTH:0.447623 G1 X-47.954 Y58.235 E.00519 G1 X-47.625 Y57.454 E.02793 ;WIDTH:0.419999 G1 X-47.128 Y56.776 E.02583 G1 X-46.526 Y56.289 E.02381 G1 X-47.95 Y54.864 E.06191 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.356 Y53.926 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.356 Y59.556 E.173 G1 X-47.575 Y59.556 E.02398 G1 X-47.645 Y59.025 E.01646 G1 X-47.555 Y58.287 E.02282 G1 X-47.276 Y57.599 E.02282 G1 X-46.829 Y57.006 E.02282 G1 X-46.244 Y56.548 E.02282 G1 X-45.89 Y56.392 E.0119 G1 X-48.328 Y53.954 E.10593 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.057 Y59.567 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-42.12 Y59.603 E.00204 G1 X-42.055 Y59.638 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.428 Y52.448 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.422603 G1 F15000 G1 X26.832 Y52.857 E.01781 ;WIDTH:0.442526 G1 X26.968 Y52.959 E.00553 ;WIDTH:0.490737 G1 X27.104 Y53.061 E.0062 ;WIDTH:0.560624 G1 F14782.707 G1 X27.24 Y53.163 E.00717 G1 X27.684 Y53.607 E.02649 G1 X27.684 Y52.719 E.03746 ;WIDTH:0.543002 G1 F15000 G1 X27.457 Y52.699 E.00928 ;WIDTH:0.502898 G1 X27.231 Y52.679 E.00854 ;WIDTH:0.468831 G1 X27.146 Y52.614 E.0037 ;WIDTH:0.430657 G3 X27.027 Y52.448 I.064 J-.171 E.00686 G1 X26.468 Y52.448 E.01765 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y52.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y37.744 E.57795 G1 X26.948 Y32.553 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.638454 G1 F12850.754 G1 X27.041 Y32.662 E.00693 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.067 Y32.692 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.590382 G1 F13979.169 G1 X27.16 Y32.814 E.00684 ;WIDTH:0.54849 G1 F15000 G1 X27.253 Y32.936 E.00632 ;WIDTH:0.487876 G1 X27.345 Y33.058 E.00556 G1 X27.723 Y33.436 E.01938 G1 X27.723 Y32.681 E.0274 ;WIDTH:0.506598 G1 X27.518 Y32.684 E.00775 ;WIDTH:0.54849 G1 X27.313 Y32.688 E.00846 ;WIDTH:0.569436 G1 F14535.297 G1 X27.107 Y32.691 E.00881 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y32.256 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y17.744 E.57795 G1 X21.258 Y17.724 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.258 Y18.408 E.02267 G1 X20.313 Y18.408 E.03135 G1 X20.353 Y18.205 E.00686 G1 X20.199 Y17.55 E.02232 G1 X19.677 Y16.894 E.02779 G3 X19.196 Y14.929 I1.149 J-1.323 E.07156 G1 X19.718 Y14.274 E.02779 G2 X20.199 Y12.308 I-1.149 J-1.323 E.07156 G1 X19.677 Y11.653 E.02779 G3 X19.196 Y9.688 I1.149 J-1.323 E.07156 G1 X19.718 Y9.032 E.02779 G2 X20.199 Y7.067 I-1.149 J-1.323 E.07156 G1 X19.677 Y6.412 E.02779 G3 X19.196 Y4.446 I1.149 J-1.323 E.07156 G1 X19.718 Y3.791 E.02779 G2 X20.199 Y1.826 I-1.149 J-1.323 E.07156 G1 X19.677 Y1.171 E.02779 G3 X19.196 Y-.795 I1.149 J-1.323 E.07156 G1 X19.718 Y-1.45 E.02779 G2 X20.199 Y-3.416 I-1.149 J-1.323 E.07156 G3 X19.172 Y-4.726 I39.157 J-31.75 E.05523 G1 X18.937 Y-4.737 E.00781 G1 X18.937 Y-6.408 E.05542 G1 X16.838 Y-6.408 E.06963 G2 X16.575 Y-4.726 I1.058 J1.026 E.06019 G1 X17.098 Y-4.071 E.02779 G3 X17.579 Y-2.105 I-1.149 J1.323 E.07156 G1 X17.056 Y-1.45 E.02779 G2 X16.575 Y.515 I1.149 J1.323 E.07156 G1 X17.098 Y1.171 E.02779 G3 X17.579 Y3.136 I-1.149 J1.323 E.07156 G1 X17.056 Y3.791 E.02779 G2 X16.575 Y5.757 I1.149 J1.323 E.07156 G1 X17.098 Y6.412 E.02779 G3 X17.579 Y8.377 I-1.149 J1.323 E.07156 G1 X17.056 Y9.032 E.02779 G2 X16.575 Y10.998 I1.149 J1.323 E.07156 G1 X17.098 Y11.653 E.02779 G3 X17.579 Y13.619 I-1.149 J1.323 E.07156 G1 X17.056 Y14.274 E.02779 G2 X16.575 Y16.239 I1.149 J1.323 E.07156 G3 X17.602 Y17.55 I-39.153 J31.747 E.05523 G1 X17.732 Y18.205 E.02216 G1 X17.685 Y18.408 E.00691 G1 X15.071 Y18.408 E.08669 G1 X15.112 Y18.205 E.00686 G1 X14.958 Y17.55 E.02232 G1 X14.792 Y17.342 E.00882 G1 X14.792 Y13.865 E.11535 G2 X14.958 Y12.308 I-1.129 J-.907 E.05485 G1 X14.792 Y12.1 E.00882 G1 X14.792 Y8.623 E.11535 G2 X14.958 Y7.067 I-1.129 J-.907 E.05485 G1 X14.792 Y6.859 E.00882 G1 X14.792 Y3.382 E.11535 G2 X14.958 Y1.826 I-1.129 J-.907 E.05485 G1 X14.792 Y1.618 E.00882 G1 X14.792 Y-1.859 E.11535 G2 X14.958 Y-3.416 I-1.129 J-.907 E.05485 G1 X14.792 Y-3.623 E.00882 G1 X14.792 Y-5.252 E.05401 G1 X22.746 Y-2.887 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.350444 G1 F15000 G1 X23.099 Y-3.279 E.01321 G1 X23.319 Y-3.459 E.00713 G1 X22.746 Y-3.459 E.01436 G1 X22.746 Y-2.927 E.01333 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.404 Y-1.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X22.681 Y-2.24 E.01807 G1 X23.186 Y-2.884 E.02513 G1 X23.806 Y-3.416 E.02513 G1 X24.489 Y-3.802 E.0241 G1 X22.404 Y-3.802 E.06407 G1 X22.404 Y-1.761 E.0627 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.027 Y-1.52 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42596 G1 F15000 G1 X22.555 Y-1.015 E.02283 G1 X22.715 Y-1.504 E.01605 G1 X23.014 Y-2.062 E.01978 G1 X23.477 Y-2.644 E.02322 G1 X24.045 Y-3.125 E.02322 G1 X24.697 Y-3.485 E.02322 G1 X25.401 Y-3.725 E.02323 G1 X26.144 Y-3.797 E.02331 G1 X26.888 Y-3.75 E.02325 ;WIDTH:0.474071 G1 X27.349 Y-3.635 E.01669 G1 X27.349 Y-4.149 E.01804 ;WIDTH:0.466045 G1 X26.811 Y-4.163 E.01853 ;WIDTH:0.426446 G3 X24.702 Y-4.179 I4.633 J-750.717 E.06592 G1 X22.027 Y-4.179 E.08362 G1 X22.027 Y-1.56 E.08183 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.65 Y-1.254 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X21.783 Y-1.254 E.0041 G1 X22.802 Y-.235 E.04426 G1 X22.85 Y-.685 E.01391 G1 X23.033 Y-1.292 E.01947 G1 X23.346 Y-1.885 E.0206 G1 X23.769 Y-2.405 E.0206 G1 X24.285 Y-2.833 E.0206 G1 X24.874 Y-3.152 E.0206 G1 X25.515 Y-3.35 E.0206 G1 X26.182 Y-3.42 E.0206 G1 X26.849 Y-3.358 E.0206 G1 X27.492 Y-3.167 E.0206 G1 X27.756 Y-3.031 E.00913 G1 X27.756 Y-4.556 E.04686 G1 X21.65 Y-4.556 E.18762 G1 X21.65 Y-1.294 E.10023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.14 Y3.052 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.422432 G1 F15000 G1 X27.952 Y4.863 E.07923 G1 X27.952 Y5.4 E.0166 G1 X25.529 Y2.977 E.10597 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.223 Y.671 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.667 Y-.884 E.06803 G1 X21.667 Y-.348 E.0166 G1 X23.205 Y1.19 E.06726 G2 X25.01 Y2.995 I2.977 J-1.172 E.08119 G1 X27.952 Y5.937 E.12867 G1 X27.952 Y6.474 E.0166 G1 X21.667 Y.189 E.27486 G1 X21.667 Y.726 E.0166 G1 X27.952 Y7.01 E.27486 G1 X27.952 Y7.547 E.0166 G1 X21.667 Y1.262 E.27486 G1 X21.667 Y1.799 E.0166 G1 X27.952 Y8.084 E.27486 G1 X27.952 Y8.62 E.0166 G1 X21.667 Y2.336 E.27486 G1 X21.667 Y2.873 E.0166 G1 X27.952 Y9.157 E.27486 G1 X27.952 Y9.694 E.0166 G1 X21.667 Y3.409 E.27486 G1 X21.667 Y3.946 E.0166 G1 X27.952 Y10.231 E.27486 G1 X27.952 Y10.767 E.0166 G1 X21.667 Y4.483 E.27486 G1 X21.667 Y5.019 E.0166 G1 X27.952 Y11.304 E.27486 G1 X27.952 Y11.841 E.0166 G1 X21.667 Y5.556 E.27486 G1 X21.667 Y6.093 E.0166 G1 X27.952 Y12.377 E.27486 G1 X27.952 Y12.914 E.0166 G1 X21.667 Y6.63 E.27486 G1 X21.667 Y7.166 E.0166 G1 X27.952 Y13.451 E.27486 G1 X27.952 Y13.988 E.0166 G1 X21.667 Y7.703 E.27486 G1 X21.667 Y8.24 E.0166 G1 X27.952 Y14.524 E.27486 G1 X27.952 Y15.061 E.0166 G1 X21.667 Y8.776 E.27486 G1 X21.667 Y9.313 E.0166 G1 X27.952 Y15.598 E.27486 G1 X27.952 Y16.134 E.0166 G1 X21.667 Y9.85 E.27486 G1 X21.667 Y10.386 E.0166 G1 X27.952 Y16.671 E.27486 G1 X27.952 Y17.208 E.0166 G1 X21.667 Y10.923 E.27486 G1 X21.667 Y11.46 E.0166 G1 X27.756 Y17.548 E.26628 G1 X27.238 Y17.548 E.01601 G1 X27.238 Y17.567 E.00059 G1 X21.667 Y11.997 E.24364 G1 X21.667 Y12.533 E.0166 G1 X26.886 Y17.752 E.22823 G1 X26.349 Y17.752 E.0166 G1 X21.667 Y13.07 E.20476 G1 X21.667 Y13.607 E.0166 G1 X25.812 Y17.752 E.18129 G1 X25.276 Y17.752 E.0166 G1 X21.667 Y14.143 E.15782 G1 X21.667 Y14.54 E.01227 G1 X21.65 Y14.558 E.00077 G1 X21.65 Y14.663 E.00325 G1 X24.909 Y17.922 E.14253 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.506 Y18.8 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X21.756 Y20.05 E.05432 G1 X21.756 Y19.166 E.02717 ;WIDTH:0.43829 G1 X21.738 Y18.964 E.00652 ;WIDTH:0.474872 G1 X21.719 Y18.762 E.00713 ;WIDTH:0.49798 G1 X21.701 Y18.561 E.00751 G1 X21.511 Y18.754 E.01005 ;WIDTH:0.424016 G1 X21.368 Y18.8 E.00465 G1 X20.546 Y18.8 E.02555 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.412 Y19.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.398318 G1 F15000 G1 X21.345 Y19.166 E.00223 G1 X21.414 Y19.2 E.00223 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.701 Y18.561 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.529744 G1 F15000 G1 X21.703 Y17.784 E.03079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.097 Y16.224 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.560721 G1 F14779.928 G1 X22.097 Y17.108 E.0373 G1 X22.981 Y17.108 E.0373 G1 X22.125 Y16.253 E.05106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.65 Y15.144 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X21.65 Y17.261 E.06505 ;WIDTH:0.43768 G1 X21.667 Y17.422 E.00521 ;WIDTH:0.473042 G1 X21.685 Y17.583 E.00568 ;WIDTH:0.508404 G1 X21.703 Y17.744 E.00615 G1 X21.783 Y17.682 E.00387 ;WIDTH:0.473042 G1 X21.864 Y17.619 E.00358 ;WIDTH:0.420646 G1 X21.944 Y17.556 E.00314 G1 X24.061 Y17.556 E.06516 G1 X21.678 Y15.173 E.10374 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.008 Y3.364 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.524104 G1 F15000 G1 X27.704 Y4.06 E.03858 G1 X27.704 Y3.119 E.03689 G1 X27.23 Y3.315 E.02009 G1 X27.047 Y3.356 E.00736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.535 Y1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.409513 G1 F12000 G1 X28.591 Y.981 E.00864 ;WIDTH:0.385476 G1 X28.611 Y.863 E.00334 ;WIDTH:0.342224 G1 X28.634 Y.731 E.00326 ;WIDTH:0.305489 G1 X28.648 Y.613 E.00254 ;WIDTH:0.275114 G1 X28.664 Y.485 E.00245 ;WIDTH:0.230422 G1 X28.688 Y-.004 E.00748 G1 X28.663 Y-.495 E.00752 ;WIDTH:0.276407 G1 X28.648 Y-.613 E.00226 ;WIDTH:0.307221 G1 X28.632 Y-.745 E.00286 ;WIDTH:0.344558 G1 X28.611 Y-.863 E.00294 ;WIDTH:0.393961 G2 X28.535 Y-1.264 I-8.18 J1.359 E.0117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.611 Y-.863 ;WIPE_END G1 X21.358 Y1.513 Z3 F30000 G1 X14.585 Y3.733 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.42 G1 F15000 G1 X14.514 Y3.773 E.00251 G1 X14.588 Y3.808 E.00252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.496 Y4.924 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X12.524 Y5.747 E.0253 G1 X12.359 Y6.387 E.02031 G1 X12.193 Y6.754 E.01238 G1 X14.4 Y8.961 E.09592 G1 X14.4 Y6.695 E.06964 G1 X14.267 Y6.695 E.0041 G1 X12.525 Y4.952 E.07572 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.088 Y6.582 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42 G1 F15000 G1 X13.618 Y7.112 E.02303 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.659 Y6.686 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X14.023 Y8.051 E.0593 G1 X14.023 Y6.962 E.03347 G3 X12.888 Y5.849 I31.389 J-33.17 E.04885 G3 X12.671 Y6.648 I-6.97 J-1.462 E.02546 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X12.888 Y5.849 G1 X13.725 Y6.669 ;WIPE_END G1 X8.883 Y2.737 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X8.82 Y2.774 E.00204 G1 X8.885 Y2.808 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X8.82 Y2.774 G1 X8.883 Y2.737 ;WIPE_END G1 X11.255 Y9.992 Z3 F30000 G1 X27.5 Y59.694 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.816 Y59.66 E.00882 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.875 Y59.624 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X26.811 Y59.661 E.00204 G1 X26.876 Y59.696 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X26.811 Y59.661 G1 X26.875 Y59.624 ;WIPE_END G1 X27.151 Y51.997 Z3 F30000 G1 X31.122 Y-57.561 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420209 G1 F15000 G1 X28.93 Y-59.752 E.09527 G1 X28.397 Y-59.752 E.0164 G1 X30.952 Y-57.197 E.11109 G1 X30.952 Y-56.663 E.0164 G1 X27.863 Y-59.752 E.13429 G1 X27.33 Y-59.752 E.0164 G1 X30.952 Y-56.13 E.15749 G1 X30.952 Y-55.596 E.0164 G1 X26.796 Y-59.752 E.18069 G1 X26.263 Y-59.752 E.0164 G1 X30.952 Y-55.063 E.20389 G1 X30.952 Y-54.529 E.0164 G1 X25.729 Y-59.752 E.22709 G1 X25.195 Y-59.752 E.0164 G1 X30.952 Y-53.995 E.25029 G1 X30.952 Y-53.462 E.0164 G1 X24.662 Y-59.752 E.27349 G1 X24.128 Y-59.752 E.0164 G1 X30.952 Y-52.928 E.29669 G1 X30.952 Y-52.395 E.0164 G1 X23.595 Y-59.752 E.31988 G1 X23.061 Y-59.752 E.0164 G1 X30.565 Y-52.248 E.32626 G1 X30.031 Y-52.248 E.0164 G1 X22.528 Y-59.752 E.32626 G1 X21.994 Y-59.752 E.0164 G1 X29.498 Y-52.248 E.32626 G1 X28.964 Y-52.248 E.0164 G1 X21.46 Y-59.752 E.32626 G1 X20.927 Y-59.752 E.0164 G1 X28.431 Y-52.248 E.32626 G1 X27.897 Y-52.248 E.0164 G1 X20.393 Y-59.752 E.32626 G1 X19.86 Y-59.752 E.0164 G1 X27.363 Y-52.248 E.32626 G1 X26.83 Y-52.248 E.0164 G1 X19.326 Y-59.752 E.32626 G1 X18.793 Y-59.752 E.0164 G1 X26.296 Y-52.248 E.32626 G1 X25.763 Y-52.248 E.0164 G1 X18.259 Y-59.752 E.32626 G1 X17.725 Y-59.752 E.0164 G1 X25.229 Y-52.248 E.32626 G1 X24.696 Y-52.248 E.0164 G1 X17.192 Y-59.752 E.32626 G1 X16.658 Y-59.752 E.0164 G1 X24.162 Y-52.248 E.32626 G1 X23.629 Y-52.248 E.0164 G1 X16.125 Y-59.752 E.32626 G1 X15.591 Y-59.752 E.0164 G1 X23.095 Y-52.248 E.32626 G1 X22.561 Y-52.248 E.0164 G1 X15.058 Y-59.752 E.32626 G1 X14.948 Y-59.752 E.00337 G1 X14.948 Y-59.328 E.01304 G1 X22.028 Y-52.248 E.30782 G1 X21.494 Y-52.248 E.0164 G1 X14.948 Y-58.794 E.28462 G1 X14.948 Y-58.261 E.0164 G1 X20.961 Y-52.248 E.26142 G1 X20.427 Y-52.248 E.0164 G1 X14.948 Y-57.727 E.23822 G1 X14.948 Y-57.194 E.0164 G1 X19.894 Y-52.248 E.21502 G1 X19.36 Y-52.248 E.0164 G1 X14.948 Y-56.66 E.19182 G1 X14.948 Y-56.126 E.0164 G1 X18.952 Y-52.123 E.17408 G1 X18.952 Y-51.589 E.0164 G1 X14.948 Y-55.593 E.17408 G1 X14.948 Y-55.059 E.0164 G1 X18.952 Y-51.055 E.17408 G1 X18.952 Y-50.522 E.0164 G1 X14.948 Y-54.526 E.17408 G1 X14.948 Y-53.992 E.0164 G1 X18.952 Y-49.988 E.17408 G1 X18.952 Y-49.455 E.0164 G1 X14.948 Y-53.459 E.17408 G1 X14.948 Y-52.925 E.0164 G1 X18.952 Y-48.921 E.17408 G1 X18.952 Y-48.388 E.0164 G1 X14.588 Y-52.752 E.18975 G1 X14.054 Y-52.752 E.0164 G1 X18.952 Y-47.854 E.21295 G1 X18.952 Y-47.321 E.0164 G1 X13.521 Y-52.752 E.23615 G1 X12.987 Y-52.752 E.0164 G1 X18.952 Y-46.787 E.25935 G1 X18.952 Y-46.253 E.0164 G1 X12.453 Y-52.752 E.28255 G1 X11.92 Y-52.752 E.0164 G1 X18.952 Y-45.72 E.30575 G1 X18.952 Y-45.186 E.0164 G1 X11.386 Y-52.752 E.32895 G1 X10.853 Y-52.752 E.0164 G1 X18.952 Y-44.653 E.35214 G1 X18.952 Y-44.119 E.0164 G1 X10.319 Y-52.752 E.37534 G1 X9.786 Y-52.752 E.0164 G1 X18.952 Y-43.586 E.39854 G1 X18.952 Y-43.052 E.0164 G1 X9.252 Y-52.752 E.42174 G1 X8.718 Y-52.752 E.0164 G1 X18.952 Y-42.518 E.44494 G1 X18.952 Y-41.985 E.0164 G1 X8.185 Y-52.752 E.46814 G1 X7.651 Y-52.752 E.0164 G1 X18.952 Y-41.451 E.49134 G1 X18.952 Y-40.918 E.0164 G1 X6.948 Y-52.922 E.52192 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.622 Y-57.517 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X4.386 Y-59.752 E.09719 G1 X3.853 Y-59.752 E.0164 G1 X6.452 Y-57.153 E.11301 G1 X6.452 Y-56.619 E.0164 G1 X3.319 Y-59.752 E.13621 G1 X2.786 Y-59.752 E.0164 G1 X6.452 Y-56.086 E.15941 G1 X6.452 Y-55.552 E.0164 G1 X2.252 Y-59.752 E.18261 G1 X1.718 Y-59.752 E.0164 G1 X6.452 Y-55.018 E.20581 G1 X6.452 Y-54.485 E.0164 G1 X1.185 Y-59.752 E.22901 G1 X.651 Y-59.752 E.0164 G1 X6.452 Y-53.951 E.2522 G1 X6.452 Y-53.418 E.0164 G1 X.118 Y-59.752 E.2754 G1 X-.416 Y-59.752 E.0164 G1 X18.952 Y-40.384 E.84209 G1 X18.952 Y-39.851 E.0164 G1 X-.949 Y-59.752 E.86529 G1 X-1.483 Y-59.752 E.0164 G1 X18.952 Y-39.317 E.88849 G1 X18.952 Y-38.783 E.0164 G1 X-2.017 Y-59.752 E.91169 G1 X-2.55 Y-59.752 E.0164 G1 X18.952 Y-38.25 E.93489 G1 X18.952 Y-37.716 E.0164 G1 X-3.084 Y-59.752 E.95808 G1 X-3.617 Y-59.752 E.0164 G1 X18.952 Y-37.183 E.98128 G1 X18.952 Y-36.649 E.0164 G1 X-4.151 Y-59.752 E1.00448 G1 X-4.684 Y-59.752 E.0164 G1 X18.952 Y-36.116 E1.02768 G1 X18.952 Y-35.582 E.0164 G1 X-5.218 Y-59.752 E1.05088 G1 X-5.752 Y-59.752 E.0164 G1 X18.952 Y-35.048 E1.07408 G1 X18.952 Y-34.515 E.0164 G1 X-6.285 Y-59.752 E1.09728 G1 X-6.819 Y-59.752 E.0164 G1 X18.952 Y-33.981 E1.12048 G1 X18.952 Y-33.448 E.0164 G1 X-7.352 Y-59.752 E1.14368 G1 X-7.886 Y-59.752 E.0164 G1 X18.952 Y-32.914 E1.16687 G1 X18.952 Y-32.381 E.0164 G1 X-8.419 Y-59.752 E1.19007 G1 X-8.953 Y-59.752 E.0164 G1 X18.952 Y-31.847 E1.21327 G1 X18.952 Y-31.314 E.0164 G1 X-9.486 Y-59.752 E1.23647 G1 X-10.02 Y-59.752 E.0164 G1 X18.952 Y-30.78 E1.25967 G1 X18.952 Y-30.246 E.0164 G1 X-10.554 Y-59.752 E1.28287 G1 X-11.087 Y-59.752 E.0164 G1 X18.952 Y-29.713 E1.30607 G1 X18.952 Y-29.179 E.0164 G1 X-11.621 Y-59.752 E1.32927 G1 X-12.154 Y-59.752 E.0164 G1 X18.952 Y-28.646 E1.35247 G1 X18.952 Y-28.112 E.0164 G1 X-12.688 Y-59.752 E1.37567 G1 X-13.221 Y-59.752 E.0164 G1 X18.952 Y-27.579 E1.39886 G1 X18.952 Y-27.045 E.0164 G1 X-13.755 Y-59.752 E1.42206 G1 X-14.289 Y-59.752 E.0164 G1 X18.952 Y-26.511 E1.44526 G1 X18.952 Y-25.978 E.0164 G1 X-14.822 Y-59.752 E1.46846 G1 X-15.356 Y-59.752 E.0164 G1 X18.952 Y-25.444 E1.49166 G1 X18.952 Y-24.911 E.0164 G1 X-15.889 Y-59.752 E1.51486 G1 X-16.423 Y-59.752 E.0164 G1 X18.952 Y-24.377 E1.53806 G1 X18.952 Y-23.844 E.0164 G1 X-16.956 Y-59.752 E1.56126 G1 X-17.49 Y-59.752 E.0164 G1 X18.952 Y-23.31 E1.58446 G1 X18.952 Y-22.776 E.0164 G1 X-18.024 Y-59.752 E1.60765 G1 X-18.557 Y-59.752 E.0164 G1 X18.952 Y-22.243 E1.63085 G1 X18.952 Y-21.709 E.0164 M73 P44 R45 G1 X-19.091 Y-59.752 E1.65405 G1 X-19.624 Y-59.752 E.0164 G1 X18.952 Y-21.176 E1.67725 G1 X18.952 Y-20.642 E.0164 G1 X-20.158 Y-59.752 E1.70045 G1 X-20.691 Y-59.752 E.0164 G1 X18.952 Y-20.109 E1.72365 G1 X18.952 Y-19.575 E.0164 G1 X-21.225 Y-59.752 E1.74685 G1 X-21.759 Y-59.752 E.0164 G1 X18.952 Y-19.041 E1.77005 G1 X18.952 Y-18.508 E.0164 G1 X-22.292 Y-59.752 E1.79325 G1 X-22.826 Y-59.752 E.0164 G1 X18.952 Y-17.974 E1.81645 G1 X18.952 Y-17.441 E.0164 G1 X-23.359 Y-59.752 E1.83964 G1 X-23.893 Y-59.752 E.0164 G1 X18.952 Y-16.907 E1.86284 G1 X18.952 Y-16.374 E.0164 G1 X-24.426 Y-59.752 E1.88604 G1 X-24.96 Y-59.752 E.0164 G1 X18.952 Y-15.84 E1.90924 G1 X18.952 Y-15.306 E.0164 G1 X-25.493 Y-59.752 E1.93244 G1 X-26.027 Y-59.752 E.0164 G1 X18.952 Y-14.773 E1.95564 G1 X18.952 Y-14.239 E.0164 G1 X-26.561 Y-59.752 E1.97884 G1 X-27.052 Y-59.752 E.0151 G1 X-27.052 Y-59.71 E.0013 G1 X18.952 Y-13.706 E2.0002 G1 X18.952 Y-13.172 E.0164 G1 X-27.052 Y-59.176 E2.0002 G1 X-27.052 Y-58.642 E.0164 G1 X18.952 Y-12.639 E2.0002 G1 X18.952 Y-12.105 E.0164 G1 X-27.052 Y-58.109 E2.0002 G1 X-27.052 Y-57.575 E.0164 G1 X18.952 Y-11.572 E2.0002 G1 X18.952 Y-11.038 E.0164 G1 X-27.052 Y-57.042 E2.0002 G1 X-27.052 Y-56.508 E.0164 G1 X18.952 Y-10.504 E2.0002 G1 X18.952 Y-9.971 E.0164 G1 X-27.052 Y-55.975 E2.0002 G1 X-27.052 Y-55.441 E.0164 G1 X18.952 Y-9.437 E2.0002 G1 X18.952 Y-8.904 E.0164 G1 X-27.052 Y-54.907 E2.0002 G1 X-27.052 Y-54.374 E.0164 G1 X18.952 Y-8.37 E2.0002 G1 X18.952 Y-7.837 E.0164 G1 X-27.052 Y-53.84 E2.0002 G1 X-27.052 Y-53.307 E.0164 G1 X18.952 Y-7.303 E2.0002 G1 X18.952 Y-6.8 E.01547 G1 X18.922 Y-6.8 E.00093 G1 X-27.052 Y-52.773 E1.99888 G1 X-27.052 Y-52.752 E.00066 G1 X-27.564 Y-52.752 E.01575 G1 X18.388 Y-6.8 E1.99795 G1 X17.854 Y-6.8 E.0164 G1 X-28.098 Y-52.752 E1.99795 G1 X-28.631 Y-52.752 E.0164 G1 X-17.756 Y-41.877 E.47284 G2 X-18.349 Y-41.936 I-.592 J2.951 E.01833 G1 X-29.165 Y-52.752 E.47028 G1 X-29.698 Y-52.752 E.0164 G1 X-18.823 Y-41.876 E.47286 G2 X-19.242 Y-41.762 I.141 J1.341 E.01341 G1 X-30.232 Y-52.752 E.47784 G1 X-30.766 Y-52.752 E.0164 G1 X-19.607 Y-41.593 E.48518 G2 X-19.927 Y-41.38 I3.943 J6.263 E.01183 G1 X-31.299 Y-52.752 E.49446 G1 X-31.833 Y-52.752 E.0164 G1 X-20.207 Y-41.126 E.50549 G2 X-20.448 Y-40.834 I.987 J1.064 E.01168 G1 X-32.366 Y-52.752 E.51818 G1 X-32.9 Y-52.752 E.0164 G1 X-20.65 Y-40.502 E.53259 G2 X-20.809 Y-40.127 I1.347 J.788 E.01256 G1 X-33.433 Y-52.752 E.54891 G1 X-33.967 Y-52.752 E.0164 G1 X-20.915 Y-39.7 E.56749 G2 X-20.937 Y-39.188 I2.331 J.357 E.01577 G1 X-34.67 Y-52.922 E.5971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-57.365 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-37.766 Y-59.752 E.10379 G1 X-38.299 Y-59.752 E.0164 G1 X-35.548 Y-57.001 E.11961 G1 X-35.548 Y-56.467 E.0164 G1 X-38.833 Y-59.752 E.14281 G1 X-39.366 Y-59.752 E.0164 G1 X-35.548 Y-55.934 E.16601 G1 X-35.548 Y-55.4 E.0164 G1 X-39.9 Y-59.752 E.18921 G1 X-40.433 Y-59.752 E.0164 G1 X-35.548 Y-54.867 E.21241 G1 X-35.548 Y-54.333 E.0164 G1 X-40.967 Y-59.752 E.23561 G1 X-41.501 Y-59.752 E.0164 G1 X-35.378 Y-53.63 E.26618 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.952 Y-40.073 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X17.321 Y-6.8 E1.44668 G1 X16.787 Y-6.8 E.0164 G1 X-15.652 Y-39.239 E1.41044 G3 X-15.708 Y-38.761 I-1.843 J.029 E.01484 G1 X16.254 Y-6.8 E1.38966 G1 X15.72 Y-6.8 E.0164 G1 X-15.826 Y-38.346 E1.37161 G3 X-15.995 Y-37.981 I-1.47 J-.459 E.01239 G1 X15.187 Y-6.8 E1.35575 G1 X14.653 Y-6.8 E.0164 G1 X-16.208 Y-37.661 E1.34183 G3 X-16.462 Y-37.382 I-1.189 J-.824 E.01165 G1 X14.4 Y-6.519 E1.34187 G1 X14.4 Y-5.985 E.0164 G1 X-16.754 Y-37.14 E1.35456 G3 X-17.088 Y-36.94 I-.778 J-.923 E.01201 G1 X14.4 Y-5.452 E1.36908 G1 X14.4 Y-4.918 E.0164 G1 X-17.461 Y-36.78 E1.38529 G3 X-17.888 Y-36.673 I-.618 J-1.569 E.01357 G1 X14.4 Y-4.385 E1.40387 G1 X14.4 Y-3.851 E.0164 G1 X-18.574 Y-36.825 E1.43368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.204 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-35.548 Y-53.266 E.28938 G1 X-35.548 Y-52.752 E.0158 G1 X-35.034 Y-52.752 E.0158 G1 X-20.848 Y-38.566 E.61678 G2 X-19.022 Y-36.74 I2.535 J-.709 E.08299 G1 X14.4 Y-3.318 E1.45316 G1 X14.4 Y-2.784 E.0164 G1 X-42.568 Y-59.752 E2.47691 G1 X-43.101 Y-59.752 E.0164 G1 X14.4 Y-2.25 E2.5001 G1 X14.4 Y-1.717 E.0164 G1 X-43.635 Y-59.752 E2.5233 G1 X-44.168 Y-59.752 E.0164 G1 X14.4 Y-1.183 E2.5465 G1 X14.4 Y-.65 E.0164 G1 X-44.702 Y-59.752 E2.5697 G1 X-45.235 Y-59.752 E.0164 G1 X14.4 Y-.116 E2.5929 G1 X14.4 Y.417 E.0164 G1 X-45.769 Y-59.752 E2.6161 G1 X-46.303 Y-59.752 E.0164 G1 X14.4 Y.951 E2.6393 G1 X14.4 Y1.485 E.0164 G1 X-46.836 Y-59.752 E2.6625 G1 X-47.37 Y-59.752 E.0164 G1 X14.4 Y2.018 E2.6857 G1 X14.4 Y2.552 E.0164 G1 X-39.552 Y-51.4 E2.34578 G1 X-39.552 Y-50.867 E.0164 G1 X14.4 Y3.085 E2.34578 G1 X14.4 Y3.619 E.0164 G1 X-39.552 Y-50.333 E2.34578 G1 X-39.552 Y-49.8 E.0164 G1 X8 Y-2.248 E2.0675 G1 X7.466 Y-2.248 E.0164 G1 X-39.552 Y-49.266 E2.0443 G1 X-39.552 Y-48.733 E.0164 G1 X6.933 Y-2.248 E2.0211 G1 X6.399 Y-2.248 E.0164 G1 X-39.552 Y-48.199 E1.9979 G1 X-39.552 Y-47.665 E.0164 G1 X5.865 Y-2.248 E1.9747 G1 X5.332 Y-2.248 E.0164 G1 X-39.552 Y-47.132 E1.9515 G1 X-39.552 Y-46.598 E.0164 G1 X4.798 Y-2.248 E1.9283 G1 X4.265 Y-2.248 E.0164 G1 X-39.552 Y-46.065 E1.9051 G1 X-39.552 Y-45.531 E.0164 G1 X-17.933 Y-23.912 E.93998 G2 X-18.481 Y-23.927 I-.366 J3.347 E.01689 G1 X-39.552 Y-44.998 E.91613 G1 X-39.552 Y-44.464 E.0164 G1 X-18.944 Y-23.856 E.89601 G1 X-18.983 Y-23.85 E.00122 G2 X-19.344 Y-23.723 I.302 J1.434 E.01179 G1 X-39.552 Y-43.931 E.87862 G1 X-39.552 Y-43.397 E.0164 G1 X-19.693 Y-23.538 E.86343 G2 X-20.002 Y-23.314 I.699 J1.285 E.01178 G1 X-39.552 Y-42.863 E.85001 G1 X-39.552 Y-42.33 E.0164 M73 P44 R44 G1 X-20.273 Y-23.05 E.83824 G2 X-20.505 Y-22.749 I1.028 J1.033 E.01173 G1 X-39.552 Y-41.796 E.82814 G1 X-39.552 Y-41.263 E.0164 G1 X-20.697 Y-22.408 E.81979 G2 X-20.844 Y-22.022 I1.393 J.753 E.01275 G1 X-39.552 Y-40.729 E.81338 G1 X-39.552 Y-40.196 E.0164 G1 X-20.932 Y-21.576 E.80958 G2 X-20.935 Y-21.045 I2.014 J.276 E.01636 G1 X-39.722 Y-39.832 E.81683 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.23 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-47.903 Y-59.752 E.33363 G1 X-48.437 Y-59.752 E.0164 G1 X-40.933 Y-52.248 E.32626 G1 X-41.467 Y-52.248 E.0164 G1 X-48.97 Y-59.752 E.32626 G1 X-49.504 Y-59.752 E.0164 G1 X-42 Y-52.248 E.32626 G1 X-42.534 Y-52.248 E.0164 G1 X-50.038 Y-59.752 E.32626 G1 X-50.571 Y-59.752 E.0164 G1 X-43.067 Y-52.248 E.32626 G1 X-43.601 Y-52.248 E.0164 G1 X-51.105 Y-59.752 E.32626 G1 X-51.552 Y-59.752 E.01375 G1 X-51.552 Y-59.665 E.00266 G1 X-44.135 Y-52.248 E.3225 G1 X-44.668 Y-52.248 E.0164 G1 X-51.552 Y-59.132 E.2993 G1 X-51.552 Y-58.598 E.0164 G1 X-45.202 Y-52.248 E.2761 G1 X-45.735 Y-52.248 E.0164 G1 X-51.552 Y-58.065 E.2529 G1 X-51.552 Y-57.531 E.0164 G1 X-46.269 Y-52.248 E.2297 G1 X-46.802 Y-52.248 E.0164 G1 X-51.552 Y-56.998 E.20651 G1 X-51.552 Y-56.464 E.0164 G1 X-47.336 Y-52.248 E.18331 G1 X-47.869 Y-52.248 E.0164 G1 X-51.552 Y-55.931 E.16011 G1 X-51.552 Y-55.397 E.0164 G1 X-48.403 Y-52.248 E.13691 G1 X-48.937 Y-52.248 E.0164 G1 X-51.552 Y-54.863 E.11371 G1 X-51.552 Y-54.33 E.0164 G1 X-49.47 Y-52.248 E.09051 G1 X-50.004 Y-52.248 E.0164 G1 X-51.552 Y-53.796 E.06731 G1 X-51.552 Y-53.263 E.0164 G1 X-50.537 Y-52.248 E.04411 G1 X-51.071 Y-52.248 E.0164 G1 X-51.722 Y-52.899 E.02829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.071 Y-52.248 G1 X-50.537 Y-52.248 G1 X-50.924 Y-52.634 ;WIPE_END G1 X-45.189 Y-47.598 Z3 F30000 G1 X-15.892 Y-21.871 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X3.731 Y-2.248 E.8532 G1 X3.198 Y-2.248 E.0164 G1 X-15.661 Y-21.107 E.81996 G3 X-15.731 Y-20.643 I-1.795 J-.035 E.01445 G1 X2.664 Y-2.248 E.79981 G1 X2.131 Y-2.248 E.0164 G1 X-15.871 Y-20.25 E.78268 G3 X-16.05 Y-19.895 I-2.063 J-.817 E.01223 G1 X1.597 Y-2.248 E.76726 G1 X1.063 Y-2.248 E.0164 G1 X-16.275 Y-19.586 E.75383 G3 X-16.538 Y-19.315 I-1.159 J-.864 E.01163 G1 X.53 Y-2.248 E.74207 G1 X-.004 Y-2.248 E.0164 G1 X-16.839 Y-19.083 E.73197 G3 X-17.18 Y-18.891 I-.901 J-1.201 E.01208 G1 X-.537 Y-2.248 E.72362 G1 X-1.071 Y-2.248 E.0164 G1 X-17.566 Y-18.744 E.71721 G3 X-18.014 Y-18.657 I-.851 J-3.206 E.01402 G1 X-1.604 Y-2.248 E.71346 G1 X-2.138 Y-2.248 E.0164 G1 X-18.742 Y-18.852 E.72192 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.502 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.249 Y-18.826 E.72815 G3 X-20.776 Y-20.352 I.884 J-2.411 E.06851 G1 X-39.552 Y-39.128 E.81637 G1 X-39.552 Y-38.595 E.0164 G1 X-3.205 Y-2.248 E1.58032 G1 X-3.739 Y-2.248 E.0164 G1 X-39.552 Y-38.061 E1.55712 G1 X-39.552 Y-37.528 E.0164 G1 X-4.272 Y-2.248 E1.53392 G1 X-4.548 Y-2.248 E.00848 G1 X-4.548 Y-1.99 E.00792 G1 X-39.552 Y-36.994 E1.52193 G1 X-39.552 Y-36.461 E.0164 G1 X-4.548 Y-1.457 E1.52193 G1 X-4.548 Y-.923 E.0164 G1 X-39.552 Y-35.927 E1.52193 G1 X-39.552 Y-35.393 E.0164 G1 X-4.548 Y-.39 E1.52193 G1 X-4.548 Y.144 E.0164 G1 X-39.552 Y-34.86 E1.52193 G1 X-39.552 Y-34.326 E.0164 G1 X-4.548 Y.677 E1.52193 G1 X-4.548 Y1.211 E.0164 G1 X-39.552 Y-33.793 E1.52193 G1 X-39.552 Y-33.259 E.0164 G1 X-4.548 Y1.745 E1.52193 G1 X-4.548 Y2.278 E.0164 G1 X-39.552 Y-32.726 E1.52193 G1 X-39.552 Y-32.192 E.0164 G1 X-4.548 Y2.812 E1.52193 G1 X-4.548 Y3.345 E.0164 G1 X-39.552 Y-31.658 E1.52193 G1 X-39.552 Y-31.125 E.0164 G1 X-4.548 Y3.879 E1.52193 G1 X-4.548 Y4.412 E.0164 G1 X-39.552 Y-30.591 E1.52193 G1 X-39.552 Y-30.058 E.0164 G1 X-4.548 Y4.946 E1.52193 G1 X-4.548 Y5.48 E.0164 G1 X-39.552 Y-29.524 E1.52193 G1 X-39.552 Y-28.991 E.0164 G1 X-4.548 Y6.013 E1.52193 G1 X-4.548 Y6.547 E.0164 G1 X-39.552 Y-28.457 E1.52193 G1 X-39.552 Y-27.923 E.0164 G1 X-4.548 Y7.08 E1.52193 G1 X-4.548 Y7.614 E.0164 G1 X-39.552 Y-27.39 E1.52193 G1 X-39.552 Y-26.856 E.0164 G1 X-4.548 Y8.147 E1.52193 G1 X-4.548 Y8.681 E.0164 G1 X-39.552 Y-26.323 E1.52193 G1 X-39.552 Y-25.789 E.0164 G1 X-4.548 Y9.215 E1.52193 G1 X-4.548 Y9.748 E.0164 G1 X-16.052 Y-1.756 E.50017 G1 X-16.052 Y-2.248 E.01514 G1 X-16.544 Y-2.248 E.01514 G1 X-39.552 Y-25.256 E1.00034 G1 X-39.552 Y-24.722 E.0164 G1 X-17.078 Y-2.248 E.97715 G1 X-17.611 Y-2.248 E.0164 G1 X-39.552 Y-24.189 E.95395 G1 X-39.552 Y-23.655 E.0164 G1 X-18.145 Y-2.248 E.93075 G1 X-18.679 Y-2.248 E.0164 G1 X-39.552 Y-23.121 E.90755 G1 X-39.552 Y-22.588 E.0164 G1 X-19.212 Y-2.248 E.88435 G1 X-19.746 Y-2.248 E.0164 G1 X-39.552 Y-22.054 E.86115 G1 X-39.552 Y-21.521 E.0164 G1 X-20.279 Y-2.248 E.83795 G1 X-20.813 Y-2.248 E.0164 G1 X-39.552 Y-20.987 E.81475 G1 X-39.552 Y-20.454 E.0164 G1 X-21.346 Y-2.248 E.79155 G1 X-21.88 Y-2.248 E.0164 G1 X-39.552 Y-19.92 E.76836 G1 X-39.552 Y-19.386 E.0164 G1 X-22.414 Y-2.248 E.74516 G1 X-22.947 Y-2.248 E.0164 G1 X-39.552 Y-18.853 E.72196 G1 X-39.552 Y-18.319 E.0164 G1 X-23.481 Y-2.248 E.69876 G1 X-24.014 Y-2.248 E.0164 G1 X-39.552 Y-17.786 E.67556 G1 X-39.552 Y-17.252 E.0164 G1 X-24.548 Y-2.248 E.65236 G1 X-25.081 Y-2.248 E.0164 G1 X-39.552 Y-16.719 E.62916 G1 X-39.552 Y-16.185 E.0164 G1 X-25.615 Y-2.248 E.60596 G1 X-26.149 Y-2.248 E.0164 G1 X-39.552 Y-15.651 E.58276 G1 X-39.552 Y-15.118 E.0164 G1 X-26.682 Y-2.248 E.55956 G1 X-27.216 Y-2.248 E.0164 G1 X-39.552 Y-14.584 E.53637 G1 X-39.552 Y-14.051 E.0164 G1 X-27.749 Y-2.248 E.51317 G1 X-28.283 Y-2.248 E.0164 G1 X-39.552 Y-13.517 E.48997 G1 X-39.552 Y-12.984 E.0164 G1 X-28.816 Y-2.248 E.46677 G1 X-29.348 Y-2.246 E.01635 G1 X-39.552 Y-12.45 E.44365 G1 X-39.552 Y-11.916 E.0164 G1 X-29.348 Y-1.713 E.44365 G1 X-29.348 Y-1.179 E.0164 G1 X-39.552 Y-11.383 E.44365 G1 X-39.552 Y-10.849 E.0164 G1 X-35.502 Y-6.8 E.17607 G1 X-35.203 Y-6.8 E.00919 G1 X-35 Y-6.597 E.00884 G1 X-35 Y-6.298 E.00919 G1 X-29.348 Y-.646 E.24575 G1 X-29.348 Y-.112 E.0164 G1 X-35 Y-5.764 E.24575 G1 X-35 Y-5.231 E.0164 G1 X-29.348 Y.422 E.24575 G1 X-29.348 Y.955 E.0164 G1 X-35 Y-4.697 E.24575 G1 X-35 Y-4.163 E.0164 G1 X-29.348 Y1.489 E.24575 G1 X-29.348 Y2.022 E.0164 G1 X-35 Y-3.63 E.24575 G1 X-35 Y-3.096 E.0164 G1 X-29.348 Y2.556 E.24575 G1 X-29.348 Y2.93 E.0115 G1 X-29.59 Y2.848 E.00785 G1 X-35 Y-2.563 E.23524 G1 X-35 Y-2.029 E.0164 G1 X-30.216 Y2.755 E.208 G2 X-30.718 Y2.786 I-.058 J3.082 E.01548 G1 X-35 Y-1.496 E.18617 G1 X-35 Y-.962 E.0164 G1 X-31.145 Y2.893 E.16763 G2 X-31.52 Y3.052 I.416 J1.503 E.01255 G1 X-35 Y-.428 E.15133 G1 X-35 Y.105 E.0164 G1 X-31.851 Y3.255 E.13694 G2 X-32.142 Y3.497 I.775 J1.227 E.01168 G1 X-35.17 Y.469 E.13166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.152 Y3.688 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-32.644 Y6.197 E.10907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.097 Y7.744 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.348 Y9.492 E.07602 G1 X-29.348 Y10.026 E.0164 G1 X-34.983 Y4.391 E.24499 G1 X-34.983 Y4.925 E.0164 G1 X-29.348 Y10.559 E.24499 G1 X-29.348 Y11.093 E.0164 G1 X-34.983 Y5.458 E.24499 G1 X-34.983 Y5.992 E.0164 G1 X-29.348 Y11.626 E.24499 G1 X-29.348 Y12.16 E.0164 G1 X-34.983 Y6.525 E.24499 G1 X-34.983 Y7.059 E.0164 G1 X-29.348 Y12.694 E.24499 G1 X-29.348 Y13.227 E.0164 G1 X-35.152 Y7.423 E.25237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y4.764 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-44.543 Y2.301 E.10708 G3 X-44.829 Y2.548 I-1.398 J-1.33 E.01165 G1 X-42.25 Y5.128 E.11215 G1 X-42.25 Y5.661 E.0164 G1 X-45.147 Y2.764 E.12596 G3 X-45.498 Y2.947 I-1.103 J-1.689 E.01218 G1 X-42.25 Y6.195 E.14122 G1 X-42.25 Y6.728 E.0164 G1 X-45.887 Y3.091 E.15813 G3 X-46.326 Y3.186 I-.698 J-2.183 E.01384 G1 X-42.25 Y7.262 E.17723 G1 X-42.25 Y7.795 E.0164 G1 X-46.822 Y3.224 E.19878 G3 X-47.414 Y3.165 I.002 J-3.036 E.01833 G1 X-42.25 Y8.329 E.22453 G1 X-42.25 Y8.863 E.0164 G1 X-48.222 Y2.89 E.25968 G3 X-48.552 Y2.705 I.775 J-1.766 E.01164 G1 X-48.552 Y3.094 E.01196 G1 X-42.25 Y9.396 E.27401 G1 X-42.25 Y9.93 E.0164 G1 X-48.552 Y3.628 E.27401 G1 X-48.552 Y4.161 E.0164 G1 X-42.25 Y10.463 E.27401 G1 X-42.25 Y10.997 E.0164 G1 X-48.552 Y4.695 E.27401 G1 X-48.552 Y5.228 E.0164 G1 X-42.25 Y11.53 E.27401 G1 X-42.25 Y12.064 E.0164 G1 X-48.552 Y5.762 E.27401 G1 X-48.552 Y6.295 E.0164 G1 X-42.25 Y12.598 E.27401 G1 X-42.25 Y13.131 E.0164 G1 X-48.552 Y6.829 E.27401 G1 X-48.552 Y7.363 E.0164 G1 X-42.25 Y13.665 E.27401 G1 X-42.25 Y14.198 E.0164 G1 X-48.552 Y7.896 E.27401 G1 X-48.552 Y8.43 E.0164 G1 X-42.25 Y14.732 E.27401 G1 X-42.25 Y15.265 E.0164 G1 X-48.552 Y8.963 E.27401 G1 X-48.552 Y9.497 E.0164 G1 X-42.25 Y15.799 E.27401 G1 X-42.25 Y16.333 E.0164 G1 X-48.552 Y10.03 E.27401 G1 X-48.552 Y10.564 E.0164 G1 X-42.25 Y16.866 E.27401 G1 X-42.25 Y17.4 E.0164 G1 X-48.552 Y11.098 E.27401 G1 X-48.552 Y11.631 E.0164 G1 X-42.08 Y18.103 E.28139 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.866 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.552 Y-10.316 E.16025 G1 X-39.552 Y-9.782 E.0164 G1 X-36.569 Y-6.8 E.12967 G1 X-37.103 Y-6.8 E.0164 G1 X-39.552 Y-9.249 E.10647 G1 X-39.552 Y-8.715 E.0164 G1 X-37.637 Y-6.8 E.08328 G1 X-38.17 Y-6.8 E.0164 G1 X-39.552 Y-8.182 E.06008 G1 X-39.552 Y-7.648 E.0164 G1 X-38.704 Y-6.8 E.03688 G1 X-39.237 Y-6.8 E.0164 G1 X-39.722 Y-7.284 E.02106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y-1.392 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.548 Y10.282 E.50755 G1 X-4.548 Y10.815 E.0164 G1 X-16.052 Y-.689 E.50017 G1 X-16.052 Y-.155 E.0164 G1 X-4.548 Y11.349 E.50017 G1 X-4.548 Y11.882 E.0164 G1 X-16.052 Y.379 E.50017 G1 X-16.052 Y.912 E.0164 G1 X-4.548 Y12.416 E.50017 G1 X-4.548 Y12.95 E.0164 G1 X-16.052 Y1.446 E.50017 G1 X-16.052 Y1.979 E.0164 G1 X-4.378 Y13.653 E.50755 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-5.793 Y12.239 ;WIPE_END G1 X1.499 Y9.983 Z3 F30000 G1 X11.73 Y6.818 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X14.4 Y9.488 E.1161 G1 X14.4 Y10.022 E.0164 G1 X11.611 Y7.233 E.12127 G3 X11.332 Y7.487 I-1.106 J-.933 E.01165 G1 X14.4 Y10.555 E.1334 G1 X14.4 Y11.089 E.0164 G1 X11.013 Y7.702 E.14727 G3 X10.649 Y7.871 I-.826 J-1.298 E.01238 G1 X14.4 Y11.622 E.1631 G1 X14.4 Y12.156 E.0164 G1 X10.235 Y7.991 E.18111 G3 X9.758 Y8.047 I-.453 J-1.784 E.01481 G1 X14.4 Y12.689 E.20185 G1 X14.4 Y13.223 E.0164 G1 X9.168 Y7.991 E.22747 G3 X8.748 Y7.87 I.249 J-1.657 E.01348 G1 X8.748 Y8.104 E.0072 G1 X14.4 Y13.757 E.24575 G1 X14.4 Y14.29 E.0164 G1 X8.748 Y8.638 E.24575 G1 X8.748 Y9.172 E.0164 G1 X14.4 Y14.824 E.24575 G1 X14.4 Y15.357 E.0164 G1 X8.748 Y9.705 E.24575 G1 X8.748 Y10.239 E.0164 G1 X14.4 Y15.891 E.24575 G1 X14.4 Y16.424 E.0164 G1 X8.748 Y10.772 E.24575 G1 X8.748 Y11.306 E.0164 G1 X14.4 Y16.958 E.24575 G1 X14.4 Y17.492 E.0164 G1 X8.748 Y11.839 E.24575 G1 X8.748 Y12.373 E.0164 G1 X14.57 Y18.195 E.25313 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.807 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.952 Y20.775 E.09324 G1 X21.952 Y21.308 E.0164 G1 X19.443 Y18.8 E.10907 G1 X18.91 Y18.8 E.0164 G1 X21.952 Y21.842 E.13226 G1 X21.952 Y22.375 E.0164 G1 X18.376 Y18.8 E.15546 G1 X17.843 Y18.8 E.0164 G1 X21.952 Y22.909 E.17866 G1 X21.952 Y23.443 E.0164 G1 X17.309 Y18.8 E.20186 G1 X16.776 Y18.8 E.0164 G1 X21.952 Y23.976 E.22506 G1 X21.952 Y24.51 E.0164 G1 X16.242 Y18.8 E.24826 G1 X15.708 Y18.8 E.0164 G1 X21.952 Y25.043 E.27146 G1 X21.952 Y25.577 E.0164 G1 X15.005 Y18.63 E.30204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y12.737 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.952 Y26.11 E.58146 G1 X21.952 Y26.644 E.0164 G1 X8.748 Y13.44 E.57409 G1 X8.748 Y13.974 E.0164 G1 X21.952 Y27.177 E.57409 G1 X21.952 Y27.711 E.0164 G1 X8.489 Y14.248 E.58535 G1 X7.955 Y14.248 E.0164 G1 X21.952 Y28.245 E.60855 G1 X21.952 Y28.778 E.0164 G1 X7.422 Y14.248 E.63175 G1 X6.888 Y14.248 E.0164 G1 X21.952 Y29.312 E.65495 G1 X21.952 Y29.845 E.0164 G1 X6.355 Y14.248 E.67815 G1 X5.821 Y14.248 E.0164 G1 X21.952 Y30.379 E.70135 G1 X21.952 Y30.912 E.0164 G1 X5.288 Y14.248 E.72455 G1 X4.754 Y14.248 E.0164 G1 X22.122 Y31.616 E.75513 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.786 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y34.245 E.09418 G1 X27.952 Y34.778 E.0164 G1 X25.422 Y32.248 E.11001 G1 X24.888 Y32.248 E.0164 G1 X27.952 Y35.312 E.1332 G1 X27.952 Y35.845 E.0164 G1 X24.355 Y32.248 E.1564 G1 X23.821 Y32.248 E.0164 G1 X27.952 Y36.379 E.1796 G1 X27.952 Y36.912 E.0164 G1 X23.288 Y32.248 E.2028 G1 X22.754 Y32.248 E.0164 G1 X27.952 Y37.446 E.226 G1 X27.952 Y37.548 E.00315 G1 X27.521 Y37.548 E.01326 G1 X4.22 Y14.248 E1.01307 G1 X3.687 Y14.248 E.0164 G1 X27.191 Y37.752 E1.02192 G1 X26.657 Y37.752 E.0164 G1 X3.153 Y14.248 E1.02192 G1 X2.62 Y14.248 E.0164 G1 X26.124 Y37.752 E1.02192 G1 X25.59 Y37.752 E.0164 G1 X2.086 Y14.248 E1.02192 G1 X1.553 Y14.248 E.0164 G1 X25.056 Y37.752 E1.02192 G1 X24.523 Y37.752 E.0164 M73 P45 R44 G1 X1.019 Y14.248 E1.02192 G1 X.485 Y14.248 E.0164 G1 X23.989 Y37.752 E1.02192 G1 X23.456 Y37.752 E.0164 G1 X-.048 Y14.248 E1.02192 G1 X-.582 Y14.248 E.0164 G1 X22.922 Y37.752 E1.02192 G1 X22.389 Y37.752 E.0164 G1 X-1.115 Y14.248 E1.02192 G1 X-1.649 Y14.248 E.0164 G1 X21.952 Y37.849 E1.02613 G1 X21.952 Y38.382 E.0164 G1 X-2.182 Y14.248 E1.04933 G1 X-2.716 Y14.248 E.0164 G1 X21.952 Y38.916 E1.07253 G1 X21.952 Y39.45 E.0164 G1 X-3.25 Y14.248 E1.09573 G1 X-3.783 Y14.248 E.0164 G1 X21.952 Y39.983 E1.11893 G1 X21.952 Y40.517 E.0164 G1 X-16.052 Y2.513 E1.65237 G1 X-16.052 Y3.046 E.0164 G1 X21.952 Y41.05 E1.65237 G1 X21.952 Y41.584 E.0164 G1 X4.948 Y24.58 E.73931 G1 X4.948 Y25.114 E.0164 G1 X21.952 Y42.117 E.73931 G1 X21.952 Y42.651 E.0164 G1 X4.948 Y25.647 E.73931 G1 X4.948 Y26.181 E.0164 G1 X21.952 Y43.185 E.73931 G1 X21.952 Y43.718 E.0164 G1 X4.948 Y26.714 E.73931 G1 X4.948 Y27.248 E.0164 G1 X21.952 Y44.252 E.73931 G1 X21.952 Y44.785 E.0164 G1 X4.948 Y27.781 E.73931 G1 X4.948 Y28.315 E.0164 G1 X21.952 Y45.319 E.73931 G1 X21.952 Y45.852 E.0164 G1 X4.948 Y28.849 E.73931 G1 X4.948 Y29.382 E.0164 G1 X21.952 Y46.386 E.73931 G1 X21.952 Y46.919 E.0164 G1 X4.948 Y29.916 E.73931 G1 X4.948 Y30.449 E.0164 G1 X21.952 Y47.453 E.73931 G1 X21.952 Y47.987 E.0164 G1 X4.948 Y30.983 E.73931 G1 X4.948 Y31.516 E.0164 G1 X21.952 Y48.52 E.73931 G1 X21.952 Y49.054 E.0164 G1 X4.948 Y32.05 E.73931 G1 X4.948 Y32.584 E.0164 G1 X21.952 Y49.587 E.73931 G1 X21.952 Y50.121 E.0164 G1 X4.948 Y33.117 E.73931 G1 X4.948 Y33.651 E.0164 G1 X21.952 Y50.654 E.73931 G1 X21.952 Y51.188 E.0164 G1 X4.778 Y34.015 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.29 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-16.052 Y3.58 E.88443 G1 X-16.052 Y4.114 E.0164 G1 X3.586 Y23.752 E.85385 G1 X3.053 Y23.752 E.0164 G1 X-16.052 Y4.647 E.83065 G1 X-16.052 Y5.181 E.0164 G1 X2.519 Y23.752 E.80746 G1 X1.986 Y23.752 E.0164 G1 X-16.052 Y5.714 E.78426 G1 X-16.052 Y6.248 E.0164 G1 X1.452 Y23.752 E.76106 G1 X.919 Y23.752 E.0164 G1 X-16.052 Y6.781 E.73786 G1 X-16.052 Y7.315 E.0164 G1 X.385 Y23.752 E.71466 G1 X-.149 Y23.752 E.0164 G1 X-16.052 Y7.849 E.69146 G1 X-16.052 Y8.382 E.0164 G1 X-.682 Y23.752 E.66826 G1 X-1.216 Y23.752 E.0164 G1 X-16.052 Y8.916 E.64506 G1 X-16.052 Y9.449 E.0164 G1 X-1.749 Y23.752 E.62186 G1 X-2.283 Y23.752 E.0164 G1 X-16.052 Y9.983 E.59867 G1 X-16.052 Y10.516 E.0164 G1 X-2.816 Y23.752 E.57547 G1 X-3.35 Y23.752 E.0164 G1 X-16.052 Y11.05 E.55227 G1 X-16.052 Y11.584 E.0164 G1 X-3.884 Y23.752 E.52907 G1 X-4.417 Y23.752 E.0164 G1 X-16.052 Y12.117 E.50587 G1 X-16.052 Y12.651 E.0164 G1 X-4.951 Y23.752 E.48267 G1 X-5.484 Y23.752 E.0164 G1 X-16.052 Y13.184 E.45947 G1 X-16.052 Y13.718 E.0164 G1 X-6.018 Y23.752 E.43627 G1 X-6.551 Y23.752 E.0164 G1 X-16.055 Y14.248 E.41321 G1 X-16.589 Y14.248 E.0164 G1 X-7.085 Y23.752 E.41321 G1 X-7.618 Y23.752 E.0164 G1 X-17.122 Y14.248 E.41321 G1 X-17.656 Y14.248 E.0164 G1 X-8.152 Y23.752 E.41321 G1 X-8.686 Y23.752 E.0164 G1 X-18.189 Y14.248 E.41321 G1 X-18.723 Y14.248 E.0164 G1 X-9.219 Y23.752 E.41321 G1 X-9.753 Y23.752 E.0164 G1 X-19.257 Y14.248 E.41321 G1 X-19.79 Y14.248 E.0164 G1 X-10.286 Y23.752 E.41321 G1 X-10.82 Y23.752 E.0164 G1 X-20.324 Y14.248 E.41321 G1 X-20.857 Y14.248 E.0164 G1 X-11.353 Y23.752 E.41321 G1 X-11.887 Y23.752 E.0164 G1 X-21.391 Y14.248 E.41321 G1 X-21.924 Y14.248 E.0164 G1 X-12.421 Y23.752 E.41321 G1 X-12.954 Y23.752 E.0164 G1 X-22.458 Y14.248 E.41321 G1 X-22.992 Y14.248 E.0164 G1 X-13.488 Y23.752 E.41321 G1 X-14.021 Y23.752 E.0164 G1 X-23.525 Y14.248 E.41321 G1 X-24.059 Y14.248 E.0164 G1 X-14.555 Y23.752 E.41321 G1 X-15.088 Y23.752 E.0164 G1 X-24.592 Y14.248 E.41321 G1 X-25.126 Y14.248 E.0164 G1 X-15.622 Y23.752 E.41321 G1 X-16.156 Y23.752 E.0164 G1 X-25.659 Y14.248 E.41321 G1 X-26.193 Y14.248 E.0164 G1 X-16.689 Y23.752 E.41321 G1 X-17.223 Y23.752 E.0164 G1 X-26.726 Y14.248 E.41321 G1 X-27.26 Y14.248 E.0164 G1 X-17.756 Y23.752 E.41321 G1 X-18.29 Y23.752 E.0164 G1 X-27.794 Y14.248 E.41321 G1 X-28.327 Y14.248 E.0164 G1 X-18.823 Y23.752 E.41321 G1 X-19.357 Y23.752 E.0164 G1 X-28.861 Y14.248 E.41321 G1 X-29.348 Y14.248 E.01498 G1 X-29.348 Y13.761 E.01498 G1 X-34.983 Y8.126 E.24499 G1 X-34.983 Y8.66 E.0164 G1 X-19.891 Y23.752 E.65619 G1 X-20.424 Y23.752 E.0164 G1 X-34.983 Y9.193 E.63299 G1 X-34.983 Y9.727 E.0164 G1 X-20.958 Y23.752 E.6098 G1 X-21.491 Y23.752 E.0164 G1 X-34.983 Y10.26 E.5866 G1 X-34.983 Y10.794 E.0164 G1 X-22.025 Y23.752 E.5634 G1 X-22.558 Y23.752 E.0164 G1 X-34.983 Y11.328 E.5402 G1 X-34.983 Y11.861 E.0164 G1 X-23.092 Y23.752 E.517 G1 X-23.626 Y23.752 E.0164 G1 X-34.983 Y12.395 E.4938 G1 X-34.983 Y12.928 E.0164 G1 X-24.159 Y23.752 E.4706 G1 X-24.693 Y23.752 E.0164 G1 X-34.983 Y13.462 E.4474 G1 X-34.983 Y13.995 E.0164 G1 X-25.226 Y23.752 E.4242 G1 X-25.548 Y23.752 E.0099 G1 X-25.548 Y23.964 E.00651 G1 X-34.983 Y14.529 E.41021 G1 X-34.983 Y15.063 E.0164 G1 X-25.548 Y24.497 E.41021 G1 X-25.548 Y25.031 E.0164 G1 X-34.983 Y15.596 E.41021 G1 X-34.983 Y16.13 E.0164 G1 X-25.548 Y25.564 E.41021 G1 X-25.548 Y26.098 E.0164 G1 X-34.983 Y16.663 E.41021 G1 X-34.983 Y17.197 E.0164 G1 X-25.548 Y26.631 E.41021 G1 X-25.548 Y27.165 E.0164 G1 X-34.983 Y17.73 E.41021 G1 X-34.983 Y18.1 E.01137 G2 X-35 Y18.246 I.414 J.124 E.00455 G1 X-25.548 Y27.699 E.41097 G1 X-25.548 Y28.232 E.0164 G1 X-35.092 Y18.688 E.41496 G1 X-35.203 Y18.8 E.00485 G1 X-35.514 Y18.8 E.00955 G1 X-25.548 Y28.766 E.43331 G1 X-25.548 Y29.299 E.0164 G1 X-36.048 Y18.8 E.45651 G1 X-36.581 Y18.8 E.0164 G1 X-25.548 Y29.833 E.47971 G1 X-25.548 Y30.366 E.0164 G1 X-37.115 Y18.8 E.5029 G1 X-37.648 Y18.8 E.0164 G1 X-25.548 Y30.9 E.5261 G1 X-25.548 Y31.434 E.0164 G1 X-38.182 Y18.8 E.5493 G1 X-38.715 Y18.8 E.0164 G1 X-25.548 Y31.967 E.5725 G1 X-25.548 Y32.501 E.0164 G1 X-39.249 Y18.8 E.5957 G1 X-39.783 Y18.8 E.0164 G1 X-25.548 Y33.034 E.6189 G1 X-25.548 Y33.568 E.0164 G1 X-40.486 Y18.63 E.64948 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-39.072 Y20.044 ;WIPE_END G1 X-32.126 Y16.879 Z3 F30000 G1 X8.578 Y-1.669 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X14.383 Y4.135 E.25237 G1 X14.383 Y4.668 E.0164 G1 X8.748 Y-.966 E.24499 G1 X8.748 Y-.433 E.0164 G1 X14.383 Y5.202 E.24499 G1 X14.383 Y5.736 E.0164 G1 X8.748 Y.101 E.24499 G1 X8.748 Y.635 E.0164 G1 X14.383 Y6.269 E.24499 G1 X14.383 Y6.331 E.00189 G1 X10.691 Y2.639 E.1605 G1 X10.505 Y2.825 E.00808 G1 X10.387 Y2.807 E.00368 G1 X8.748 Y1.168 E.07126 G1 X8.748 Y1.702 E.0164 G1 X9.792 Y2.745 E.04538 G2 X9.489 Y2.763 I.524 J11.672 E.00933 G1 X9.42 Y2.767 E.00211 G2 X9.296 Y2.783 I.005 J.516 E.00386 G1 X8.578 Y2.066 E.03121 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X9.296 Y2.783 G1 X9.42 Y2.767 G1 X9.489 Y2.763 G1 X9.792 Y2.745 G1 X9.447 Y2.401 ;WIPE_END G1 X11.795 Y9.663 Z3 F30000 G1 X25.51 Y52.078 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y54.52 E.10616 G1 X27.952 Y55.054 E.0164 G1 X25.146 Y52.248 E.12199 G1 X24.613 Y52.248 E.0164 G1 X27.952 Y55.587 E.14518 G1 X27.952 Y56.121 E.0164 G1 X24.079 Y52.248 E.16838 G1 X23.546 Y52.248 E.0164 G1 X27.952 Y56.654 E.19158 G1 X27.952 Y57.188 E.0164 G1 X22.842 Y52.078 E.22216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y57.891 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X22.478 Y52.248 E.24536 G1 X21.952 Y52.248 E.01619 G1 X21.952 Y51.722 E.01619 G1 X4.478 Y34.248 E.75973 G1 X3.945 Y34.248 E.0164 G1 X27.952 Y58.255 E1.0438 G1 X27.952 Y58.789 E.0164 G1 X3.411 Y34.248 E1.067 G1 X2.878 Y34.248 E.0164 G1 X25.163 Y56.534 E.96895 G3 X26.666 Y58.037 I-.936 J2.439 E.06731 G1 X27.952 Y59.322 E.05589 G1 X27.952 Y59.34 E.00055 G1 X27.688 Y59.473 E.00909 G1 X27.58 Y59.484 E.00333 G1 X26.834 Y58.738 E.03245 G3 X26.833 Y59.271 I-2.025 J.265 E.01643 G1 X27.251 Y59.689 E.01819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.665 Y56.568 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X2.344 Y34.248 E.97047 G1 X1.811 Y34.248 E.0164 G1 X23.929 Y56.367 E.9617 G2 X23.48 Y56.451 I.452 J3.656 E.01407 G1 X1.277 Y34.248 E.96536 G1 X.743 Y34.248 E.0164 G1 X4.247 Y37.752 E.15234 G1 X3.714 Y37.752 E.0164 G1 X.21 Y34.248 E.15234 G1 X-.324 Y34.248 E.0164 G1 X3.18 Y37.752 E.15234 G1 X2.647 Y37.752 E.0164 G1 X-.857 Y34.248 E.15234 G1 X-1.391 Y34.248 E.0164 G1 X2.113 Y37.752 E.15234 G1 X1.579 Y37.752 E.0164 G1 X-1.924 Y34.248 E.15234 G1 X-2.458 Y34.248 E.0164 G1 X1.046 Y37.752 E.15234 G1 X.512 Y37.752 E.0164 G1 X-2.992 Y34.248 E.15234 G1 X-3.525 Y34.248 E.0164 G1 X-.021 Y37.752 E.15234 G1 X-.555 Y37.752 E.0164 G1 X-4.059 Y34.248 E.15234 G1 X-4.592 Y34.248 E.0164 G1 X-1.088 Y37.752 E.15234 G1 X-1.622 Y37.752 E.0164 G1 X-5.126 Y34.248 E.15234 G1 X-5.659 Y34.248 E.0164 G1 X-2.156 Y37.752 E.15234 G1 X-2.689 Y37.752 E.0164 G1 X-6.193 Y34.248 E.15234 G1 X-6.726 Y34.248 E.0164 G1 X-3.223 Y37.752 E.15234 G1 X-3.756 Y37.752 E.0164 G1 X-7.26 Y34.248 E.15234 G1 X-7.794 Y34.248 E.0164 G1 X-4.29 Y37.752 E.15234 G1 X-4.823 Y37.752 E.0164 G1 X-8.327 Y34.248 E.15234 G1 X-8.861 Y34.248 E.0164 G1 X-5.357 Y37.752 E.15234 G1 X-5.891 Y37.752 E.0164 G1 X-9.394 Y34.248 E.15234 G1 X-9.928 Y34.248 E.0164 G1 X-6.424 Y37.752 E.15234 G1 X-6.958 Y37.752 E.0164 G1 X-10.461 Y34.248 E.15234 G1 X-10.995 Y34.248 E.0164 G1 X-7.491 Y37.752 E.15234 G1 X-8.025 Y37.752 E.0164 G1 X-11.529 Y34.248 E.15234 G1 X-12.062 Y34.248 E.0164 G1 X-8.558 Y37.752 E.15234 G1 X-9.092 Y37.752 E.0164 G1 X-12.596 Y34.248 E.15234 G1 X-13.129 Y34.248 E.0164 G1 X-9.625 Y37.752 E.15234 G1 X-10.159 Y37.752 E.0164 G1 X-13.663 Y34.248 E.15234 G1 X-14.196 Y34.248 E.0164 G1 X-10.693 Y37.752 E.15234 G1 X-11.226 Y37.752 E.0164 G1 X-14.73 Y34.248 E.15234 G1 X-15.264 Y34.248 E.0164 G1 X-11.76 Y37.752 E.15234 G1 X-12.293 Y37.752 E.0164 G1 X-15.797 Y34.248 E.15234 G1 X-16.331 Y34.248 E.0164 G1 X-12.827 Y37.752 E.15234 G1 X-13.36 Y37.752 E.0164 G1 X-16.864 Y34.248 E.15234 G1 X-17.398 Y34.248 E.0164 G1 X-13.894 Y37.752 E.15234 G1 X-14.428 Y37.752 E.0164 G1 X-17.931 Y34.248 E.15234 G1 X-18.465 Y34.248 E.0164 G1 X-14.961 Y37.752 E.15234 G1 X-15.495 Y37.752 E.0164 G1 X-18.999 Y34.248 E.15234 G1 X-19.532 Y34.248 E.0164 G1 X-16.028 Y37.752 E.15234 G1 X-16.562 Y37.752 E.0164 G1 X-20.066 Y34.248 E.15234 G1 X-20.599 Y34.248 E.0164 G1 X-17.095 Y37.752 E.15234 G1 X-17.629 Y37.752 E.0164 G1 X-21.133 Y34.248 E.15234 G1 X-21.666 Y34.248 E.0164 G1 X-18.163 Y37.752 E.15234 G1 X-18.696 Y37.752 E.0164 G1 X-22.2 Y34.248 E.15234 G1 X-22.733 Y34.248 E.0164 G1 X-19.23 Y37.752 E.15234 G1 X-19.763 Y37.752 E.0164 G1 X-23.267 Y34.248 E.15234 G1 X-23.801 Y34.248 E.0164 G1 X-20.297 Y37.752 E.15234 G1 X-20.83 Y37.752 E.0164 G1 X-24.334 Y34.248 E.15234 G1 X-24.868 Y34.248 E.0164 G1 X-21.364 Y37.752 E.15234 G1 X-21.898 Y37.752 E.0164 G1 X-40.85 Y18.8 E.82402 G1 X-41.383 Y18.8 E.0164 G1 X-22.431 Y37.752 E.82402 G1 X-22.965 Y37.752 E.0164 G1 X-42.552 Y18.165 E.85163 G1 X-42.552 Y17.752 E.01269 G1 X-42.965 Y17.752 E.01269 G1 X-48.552 Y12.165 E.24293 G1 X-48.552 Y12.698 E.0164 G1 X-43.498 Y17.752 E.21973 G1 X-44.032 Y17.752 E.0164 G1 X-48.552 Y13.232 E.19653 G1 X-48.552 Y13.765 E.0164 G1 X-44.565 Y17.752 E.17333 G1 X-45.099 Y17.752 E.0164 G1 X-48.552 Y14.299 E.15013 G1 X-48.552 Y14.833 E.0164 G1 X-45.633 Y17.752 E.12693 G1 X-46.166 Y17.752 E.0164 G1 X-48.552 Y15.366 E.10373 G1 X-48.552 Y15.9 E.0164 G1 X-46.7 Y17.752 E.08053 G1 X-47.233 Y17.752 E.0164 G1 X-48.552 Y16.433 E.05733 G1 X-48.552 Y16.967 E.0164 G1 X-47.807 Y17.711 E.03237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y18.529 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-23.498 Y37.752 E.83581 G1 X-24.032 Y37.752 E.0164 G1 X-42.552 Y19.232 E.80523 G1 X-42.552 Y19.765 E.0164 G1 X-24.565 Y37.752 E.78203 G1 X-25.099 Y37.752 E.0164 G1 X-42.552 Y20.299 E.75884 G1 X-42.552 Y20.833 E.0164 G1 X-25.548 Y37.836 E.73931 G1 X-25.548 Y38.37 E.0164 G1 X-42.552 Y21.366 E.73931 G1 X-42.552 Y21.9 E.0164 G1 X-25.548 Y38.903 E.73931 G1 X-25.548 Y39.437 E.0164 G1 X-42.552 Y22.433 E.73931 G1 X-42.552 Y22.967 E.0164 G1 X-25.548 Y39.971 E.73931 G1 X-25.548 Y40.504 E.0164 G1 X-42.552 Y23.5 E.73931 G1 X-42.552 Y24.034 E.0164 G1 X-25.548 Y41.038 E.73931 G1 X-25.548 Y41.571 E.0164 G1 X-42.552 Y24.567 E.73931 G1 X-42.552 Y25.101 E.0164 G1 X-25.548 Y42.105 E.73931 G1 X-25.548 Y42.638 E.0164 G1 X-42.552 Y25.635 E.73931 G1 X-42.552 Y26.168 E.0164 G1 X-25.548 Y43.172 E.73931 G1 X-25.548 Y43.706 E.0164 G1 X-42.552 Y26.702 E.73931 G1 X-42.552 Y27.235 E.0164 G1 X-25.548 Y44.239 E.73931 G1 X-25.548 Y44.773 E.0164 G1 X-42.552 Y27.769 E.73931 G1 X-42.552 Y28.302 E.0164 G1 X-25.548 Y45.306 E.73931 G1 X-25.548 Y45.84 E.0164 G1 X-42.552 Y28.836 E.73931 G1 X-42.552 Y29.37 E.0164 G1 X-25.548 Y46.373 E.73931 G1 X-25.548 Y46.907 E.0164 G1 X-42.552 Y29.903 E.73931 G1 X-42.552 Y30.437 E.0164 G1 X-25.378 Y47.61 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-26.793 Y46.196 ;WIPE_END G1 X-19.389 Y44.34 Z3 F30000 G1 X4.778 Y38.283 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X23.092 Y56.597 E.79627 G2 X22.75 Y56.788 I.554 J1.397 E.01209 G1 X4.948 Y38.986 E.77399 G1 X4.948 Y39.52 E.0164 G1 X22.447 Y57.019 E.76084 G2 X22.183 Y57.288 I.891 J1.138 E.01163 G1 X4.948 Y40.053 E.74935 G1 X4.948 Y40.587 E.0164 G1 X21.957 Y57.596 E.73953 G2 X21.772 Y57.944 I1.229 J.878 E.01216 G1 X4.948 Y41.121 E.73146 G1 X4.948 Y41.654 E.0164 G1 X21.634 Y58.34 E.7255 G2 X21.562 Y58.802 I1.717 J.505 E.0144 G1 X4.948 Y42.188 E.72236 G1 X4.948 Y42.721 E.0164 G1 X21.572 Y59.346 E.72281 G2 X21.662 Y59.752 I1.587 J-.139 E.01282 G1 X21.445 Y59.752 E.00666 G1 X4.948 Y43.255 E.71727 G1 X4.948 Y43.788 E.0164 G1 X20.912 Y59.752 E.69407 G1 X20.378 Y59.752 E.0164 G1 X4.948 Y44.322 E.67088 G1 X4.948 Y44.856 E.0164 G1 X19.844 Y59.752 E.64768 G1 X19.311 Y59.752 E.0164 G1 X4.948 Y45.389 E.62448 G1 X4.948 Y45.923 E.0164 G1 X18.777 Y59.752 E.60128 G1 X18.244 Y59.752 E.0164 G1 X4.948 Y46.456 E.57808 G1 X4.948 Y46.99 E.0164 G1 X17.71 Y59.752 E.55488 G1 X17.177 Y59.752 E.0164 G1 X4.948 Y47.523 E.53168 G1 X4.948 Y48.057 E.0164 G1 X16.643 Y59.752 E.50848 G1 X16.109 Y59.752 E.0164 G1 X4.606 Y48.248 E.50017 G1 X4.072 Y48.248 E.0164 G1 X15.576 Y59.752 E.50017 G1 X15.042 Y59.752 E.0164 G1 X3.539 Y48.248 E.50017 G1 X3.005 Y48.248 E.0164 G1 X14.509 Y59.752 E.50017 G1 X13.975 Y59.752 E.0164 G1 X2.471 Y48.248 E.50017 G1 X1.938 Y48.248 E.0164 G1 X13.442 Y59.752 E.50017 G1 X12.908 Y59.752 E.0164 G1 X1.404 Y48.248 E.50017 G1 X.871 Y48.248 E.0164 G1 X12.374 Y59.752 E.50017 G1 X11.841 Y59.752 E.0164 G1 X.337 Y48.248 E.50017 G1 X-.196 Y48.248 E.0164 G1 X11.307 Y59.752 E.50017 G1 X10.774 Y59.752 E.0164 G1 X-.73 Y48.248 E.50017 G1 X-1.264 Y48.248 E.0164 G1 X10.24 Y59.752 E.50017 G1 X9.707 Y59.752 E.0164 G1 X-1.797 Y48.248 E.50017 G1 X-2.331 Y48.248 E.0164 G1 X9.173 Y59.752 E.50017 G1 X8.64 Y59.752 E.0164 G1 X-2.864 Y48.248 E.50017 G1 X-3.398 Y48.248 E.0164 G1 X8.106 Y59.752 E.50017 G1 X7.572 Y59.752 E.0164 G1 X-3.931 Y48.248 E.50017 G1 X-4.465 Y48.248 E.0164 G1 X7.039 Y59.752 E.50017 G1 X6.505 Y59.752 E.0164 G1 X-4.999 Y48.248 E.50017 G1 X-5.532 Y48.248 E.0164 G1 X5.972 Y59.752 E.50017 G1 X5.438 Y59.752 E.0164 G1 X-6.066 Y48.248 E.50017 G1 X-6.599 Y48.248 E.0164 G1 X4.905 Y59.752 E.50017 G1 X4.371 Y59.752 E.0164 G1 X-7.133 Y48.248 E.50017 G1 X-7.666 Y48.248 E.0164 G1 X3.837 Y59.752 E.50017 G1 X3.304 Y59.752 E.0164 G1 X-8.2 Y48.248 E.50017 G1 X-8.733 Y48.248 E.0164 G1 X2.77 Y59.752 E.50017 G1 X2.237 Y59.752 E.0164 G1 X-9.267 Y48.248 E.50017 G1 X-9.801 Y48.248 E.0164 G1 X1.703 Y59.752 E.50017 G1 X1.17 Y59.752 E.0164 G1 X-10.334 Y48.248 E.50017 G1 X-10.868 Y48.248 E.0164 G1 X.636 Y59.752 E.50017 G1 X.102 Y59.752 E.0164 G1 X-11.401 Y48.248 E.50017 G1 X-11.935 Y48.248 E.0164 G1 X-.431 Y59.752 E.50017 G1 X-.965 Y59.752 E.0164 G1 X-12.468 Y48.248 E.50017 G1 X-13.002 Y48.248 E.0164 G1 X-1.498 Y59.752 E.50017 G1 X-2.032 Y59.752 E.0164 G1 X-13.536 Y48.248 E.50017 G1 X-14.069 Y48.248 E.0164 G1 X-2.565 Y59.752 E.50017 G1 X-3.099 Y59.752 E.0164 G1 X-14.603 Y48.248 E.50017 G1 X-15.136 Y48.248 E.0164 G1 X-3.633 Y59.752 E.50017 G1 X-4.166 Y59.752 E.0164 G1 X-15.67 Y48.248 E.50017 G1 X-16.203 Y48.248 E.0164 G1 X-4.7 Y59.752 E.50017 G1 X-5.233 Y59.752 E.0164 G1 X-16.737 Y48.248 E.50017 G1 X-17.271 Y48.248 E.0164 G1 X-5.767 Y59.752 E.50017 G1 X-6.3 Y59.752 E.0164 G1 X-17.804 Y48.248 E.50017 G1 X-18.338 Y48.248 E.0164 G1 X-6.834 Y59.752 E.50017 G1 X-7.367 Y59.752 E.0164 G1 X-18.871 Y48.248 E.50017 G1 X-19.405 Y48.248 E.0164 G1 X-7.901 Y59.752 E.50017 G1 X-8.435 Y59.752 E.0164 G1 X-19.938 Y48.248 E.50017 G1 X-20.472 Y48.248 E.0164 G1 X-8.968 Y59.752 E.50017 G1 X-9.502 Y59.752 E.0164 G1 X-21.006 Y48.248 E.50017 G1 X-21.539 Y48.248 E.0164 G1 X-10.035 Y59.752 E.50017 G1 X-10.569 Y59.752 E.0164 G1 X-22.073 Y48.248 E.50017 G1 X-22.606 Y48.248 E.0164 G1 X-11.102 Y59.752 E.50017 G1 X-11.636 Y59.752 E.0164 G1 X-23.14 Y48.248 E.50017 G1 X-23.673 Y48.248 E.0164 G1 X-12.17 Y59.752 E.50017 G1 X-12.703 Y59.752 E.0164 G1 X-24.207 Y48.248 E.50017 G1 X-24.741 Y48.248 E.0164 G1 X-13.237 Y59.752 E.50017 G1 X-13.77 Y59.752 E.0164 G1 X-42.552 Y30.97 E1.25139 G1 X-42.552 Y31.504 E.0164 G1 X-14.304 Y59.752 E1.2282 G1 X-14.837 Y59.752 E.0164 G1 X-42.552 Y32.037 E1.205 M73 P45 R43 G1 X-42.552 Y32.248 E.00648 G1 X-42.875 Y32.248 E.00993 G1 X-15.371 Y59.752 E1.19584 G1 X-15.905 Y59.752 E.0164 G1 X-43.408 Y32.248 E1.19584 G1 X-43.942 Y32.248 E.0164 G1 X-16.438 Y59.752 E1.19584 G1 X-16.972 Y59.752 E.0164 G1 X-44.475 Y32.248 E1.19584 G1 X-45.009 Y32.248 E.0164 G1 X-17.505 Y59.752 E1.19584 G1 X-18.039 Y59.752 E.0164 G1 X-45.543 Y32.248 E1.19584 G1 X-46.076 Y32.248 E.0164 G1 X-18.572 Y59.752 E1.19584 G1 X-19.106 Y59.752 E.0164 G1 X-46.61 Y32.248 E1.19584 G1 X-47.143 Y32.248 E.0164 G1 X-19.64 Y59.752 E1.19584 G1 X-20.173 Y59.752 E.0164 G1 X-47.677 Y32.248 E1.19584 G1 X-47.838 Y32.248 E.00496 G1 X-47.838 Y32.452 E.00626 G1 X-48.007 Y32.452 E.00519 G1 X-20.707 Y59.752 E1.18699 G1 X-21.24 Y59.752 E.0164 G1 X-42.552 Y38.44 E.92661 G1 X-42.552 Y38.974 E.0164 G1 X-21.774 Y59.752 E.90341 G1 X-22.307 Y59.752 E.0164 G1 X-42.552 Y39.507 E.88021 G1 X-42.552 Y40.041 E.0164 G1 X-22.841 Y59.752 E.85701 G1 X-23.375 Y59.752 E.0164 G1 X-42.552 Y40.575 E.83381 G1 X-42.552 Y41.108 E.0164 G1 X-23.908 Y59.752 E.81061 G1 X-24.442 Y59.752 E.0164 G1 X-42.552 Y41.642 E.78741 G1 X-42.552 Y42.175 E.0164 G1 X-24.975 Y59.752 E.76422 G1 X-25.509 Y59.752 E.0164 G1 X-42.552 Y42.709 E.74102 G1 X-42.552 Y43.242 E.0164 G1 X-26.042 Y59.752 E.71782 G1 X-26.576 Y59.752 E.0164 G1 X-42.552 Y43.776 E.69462 G1 X-42.552 Y44.309 E.0164 G1 X-27.109 Y59.752 E.67142 G1 X-27.643 Y59.752 E.0164 G1 X-42.552 Y44.843 E.64822 G1 X-42.552 Y45.377 E.0164 G1 X-28.177 Y59.752 E.62502 G1 X-28.71 Y59.752 E.0164 G1 X-42.552 Y45.91 E.60182 G1 X-42.552 Y46.444 E.0164 G1 X-29.244 Y59.752 E.57862 G1 X-29.777 Y59.752 E.0164 G1 X-42.552 Y46.977 E.55543 G1 X-42.552 Y47.511 E.0164 G1 X-30.311 Y59.752 E.53223 G1 X-30.844 Y59.752 E.0164 G1 X-42.552 Y48.044 E.50903 G1 X-42.552 Y48.578 E.0164 G1 X-31.378 Y59.752 E.48583 G1 X-31.912 Y59.752 E.0164 G1 X-42.552 Y49.112 E.46263 G1 X-42.552 Y49.645 E.0164 G1 X-32.445 Y59.752 E.43943 G1 X-32.979 Y59.752 E.0164 G1 X-42.552 Y50.179 E.41623 G1 X-42.552 Y50.712 E.0164 G1 X-33.512 Y59.752 E.39303 G1 X-34.046 Y59.752 E.0164 G1 X-42.552 Y51.246 E.36983 G1 X-42.552 Y51.779 E.0164 G1 X-34.579 Y59.752 E.34663 G1 X-35.113 Y59.752 E.0164 G1 X-42.617 Y52.248 E.32626 G1 X-43.15 Y52.248 E.0164 G1 X-35.647 Y59.752 E.32626 G1 X-36.18 Y59.752 E.0164 G1 X-43.684 Y52.248 E.32626 G1 X-44.217 Y52.248 E.0164 G1 X-36.714 Y59.752 E.32626 G1 X-37.247 Y59.752 E.0164 G1 X-44.751 Y52.248 E.32626 G1 X-45.285 Y52.248 E.0164 G1 X-37.781 Y59.752 E.32626 G1 X-38.314 Y59.752 E.0164 G1 X-45.818 Y52.248 E.32626 G1 X-46.352 Y52.248 E.0164 G1 X-38.848 Y59.752 E.32626 G1 X-39.382 Y59.752 E.0164 G1 X-46.885 Y52.248 E.32626 G1 X-47.419 Y52.248 E.0164 G1 X-39.915 Y59.752 E.32626 G1 X-40.449 Y59.752 E.0164 G1 X-47.838 Y52.362 E.32129 G1 X-47.838 Y52.452 E.00274 G1 X-48.282 Y52.452 E.01366 G1 X-44.339 Y56.395 E.17144 G2 X-44.911 Y56.357 I-.469 J2.723 E.01765 G1 X-48.552 Y52.716 E.15829 G1 X-48.552 Y53.249 E.0164 G1 X-45.238 Y56.563 E.14408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.418 Y58.316 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-40.982 Y59.752 E.06243 G1 X-41.516 Y59.752 E.0164 G1 X-42.323 Y58.945 E.03509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.071 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y32.452 E.23808 G1 X-48.552 Y32.974 E.01605 G1 X-43.774 Y37.752 E.20775 G1 X-44.307 Y37.752 E.0164 G1 X-48.552 Y33.507 E.18455 G1 X-48.552 Y34.041 E.0164 G1 X-44.841 Y37.752 E.16135 G1 X-45.375 Y37.752 E.0164 G1 X-48.552 Y34.575 E.13815 G1 X-48.552 Y35.108 E.0164 G1 X-45.908 Y37.752 E.11495 G1 X-46.442 Y37.752 E.0164 G1 X-48.552 Y35.642 E.09175 G1 X-48.552 Y36.175 E.0164 G1 X-46.975 Y37.752 E.06855 G1 X-47.509 Y37.752 E.0164 G1 X-48.552 Y36.709 E.04535 G1 X-48.552 Y37.242 E.0164 G1 X-48.076 Y37.718 E.02068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-48.552 Y37.242 G1 X-48.552 Y36.709 G1 X-47.991 Y37.27 ;WIPE_END G1 X-47.02 Y29.7 Z3 F30000 G1 X-35.744 Y-58.248 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-35.744 Y-59.556 E.04019 G1 X-37.052 Y-59.556 E.04019 G1 X-35.772 Y-58.276 E.05561 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.103 Y-59.215 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.432092 G1 F15000 G1 X-36.176 Y-59.173 E.00267 G1 X-36.099 Y-59.138 E.00269 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.149 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-27.451 Y-60 E.19 G1 X6.256 Y-58.376 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X6.256 Y-59.556 E.03625 G1 X5.076 Y-59.556 E.03625 G1 X6.228 Y-58.404 E.05004 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.93 Y-59.244 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.356906 G1 F15000 G1 X5.871 Y-59.21 E.00174 G1 X5.929 Y-59.177 E.00172 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.851 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X14.549 Y-60 E.19 G1 X30.682 Y-58.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.568079 G1 F14572.847 G1 X30.682 Y-59.482 E.03836 G1 X29.785 Y-59.482 E.03836 G1 X30.654 Y-58.614 E.05254 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F14572.847 G1 X29.785 Y-59.482 G1 X30.557 Y-59.482 ;WIPE_END G1 X23.713 Y-56.105 Z3 F30000 G1 X-42.652 Y-23.367 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:2.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z3.2 I-.257 J1.19 P1 F30000 G1 X49.524 Y-1.663 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.563 Y-1.671 E.00134 G1 X50 Y-1.758 E.01477 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.484 Y-1.655 E.00531 G1 X49.609 Y-1.236 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.648 Y-1.244 E.00124 G1 X50 Y-1.314 E.01102 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.569 Y-1.228 E.00226 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.648 Y-1.244 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.218 Y-.481 ;WIPE_END G1 X50.42 Y-2.111 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.464 Y-2.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.48 Y-2.542 E.0005 G1 X50.991 Y-2.392 E.01635 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.424 Y-2.547 E.0131 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.48 Y-2.542 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.082 Y-1.524 ;WIPE_END G1 X44.495 Y-.699 Z3.2 F30000 G1 X28.09 Y1.085 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X27.883 Y1.381 E.0111 G3 X25.775 Y-2.143 I-1.692 J-1.381 E.25739 G1 X26.006 Y-2.176 E.00718 G3 X28.119 Y1.026 I.185 J2.176 E.1439 G1 X28.108 Y1.049 E.0008 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X27.883 Y1.381 G1 X27.586 Y1.689 G1 X27.23 Y1.927 G1 X26.834 Y2.091 G1 X26.526 Y2.153 ;WIPE_END G1 X19.077 Y.488 Z3.2 F30000 G1 X7.71 Y-2.052 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.552 Y7.565 I1.15 J2.165 E.33483 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.269 J2.028 E.24861 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 M73 P46 R43 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.567 Y4.258 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.572 Y4.245 E.00045 G3 X9.284 Y3.844 I1.119 J1.156 E.02538 G1 X9.509 Y3.802 E.00703 G3 X8.419 Y4.416 I.182 J1.598 E.27107 G1 X8.54 Y4.287 E.00541 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.572 Y4.245 G1 X8.72 Y4.122 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.284 Y3.844 G1 X9.509 Y3.802 G1 X9.7 Y3.79 G1 X9.91 Y3.803 G1 X10.117 Y3.844 G1 X10.316 Y3.912 G1 X10.379 Y3.943 ;WIPE_END G1 X3.17 Y6.452 Z3.2 F30000 G1 X-16.248 Y13.21 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.15 J-2.165 E.33483 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.051 Y3.779 I.269 J-2.028 E.24874 G1 X-28.745 Y4.054 E.01365 G1 X-28.745 Y-1.645 E.18903 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.464 Y8.978 Z3.2 F30000 G1 X-29.164 Y6.541 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.324 Y6.672 E.00635 G3 X-30.716 Y3.844 I-.985 J-1.272 E.17521 G1 X-30.491 Y3.802 E.00703 G3 X-29.145 Y6.511 I.182 J1.598 E.12089 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.324 Y6.672 G1 X-29.495 Y6.795 G1 X-29.684 Y6.888 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.3 Y7.01 G1 X-30.51 Y6.997 G1 X-30.718 Y6.955 G1 X-30.934 Y6.879 G1 X-30.983 Y6.855 ;WIPE_END G1 X-27.48 Y.074 Z3.2 F30000 G1 X-16.003 Y-22.141 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.936 Y-21.921 E.00762 G3 X-19.239 Y-23.556 I-2.369 J.634 E.37291 G3 X-18.596 Y-23.723 I.904 J2.154 E.02213 G3 X-16.039 Y-22.225 I.29 J2.436 E.10556 G1 X-16.019 Y-22.178 E.00169 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.389 Y-22.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.329 Y-21.816 E.00673 G3 X-19.083 Y-23.179 I-1.975 J.528 E.31091 G3 X-18.545 Y-23.318 I.755 J1.802 E.01851 G3 X-16.415 Y-22.069 I.24 J2.031 E.08795 G1 X-16.405 Y-22.047 E.00081 G1 X-16.801 Y-21.87 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.755 Y-21.702 E.00536 G3 X-18.716 Y-22.844 I-1.554 J.414 E.23315 G1 X-18.491 Y-22.886 E.00703 G3 X-16.823 Y-21.904 I.182 J1.598 E.06382 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.755 Y-21.702 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.745 Y-20.87 G1 X-16.821 Y-20.654 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.238 Y-20.082 ;WIPE_END G1 X-18.321 Y-27.637 Z3.2 F30000 G1 X-20.21 Y-40.825 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.037 Y-41.025 E.00878 G3 X-19.239 Y-41.556 I1.731 J1.737 E.03198 G3 X-18.596 Y-41.723 I.904 J2.154 E.02213 G3 X-20.249 Y-40.784 I.29 J2.435 E.44632 G1 X-20.237 Y-40.796 E.00056 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.904 Y-40.556 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.748 Y-40.736 E.00789 G3 X-19.083 Y-41.179 I1.443 J1.449 E.02667 G3 X-18.545 Y-41.318 I.755 J1.802 E.0185 G3 X-19.931 Y-40.527 I.24 J2.031 E.3718 G1 X-19.577 Y-40.27 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.442 Y-40.43 E.00644 G3 X-18.716 Y-40.844 I1.133 J1.142 E.02598 G1 X-18.491 Y-40.886 E.00703 G3 X-19.602 Y-40.244 I.182 J1.598 E.26996 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.442 Y-40.43 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.716 Y-40.844 G1 X-18.491 Y-40.886 G1 X-18.3 Y-40.899 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.818 Y-40.822 ;WIPE_END G1 X-20.314 Y-33.609 Z3.2 F30000 G1 X-42.748 Y31.21 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z3.2 F30000 G1 X-42.748 Y51.21 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z3.2 F30000 G1 X4.752 Y47.21 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z3.2 F30000 G1 X4.752 Y33.21 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z3.2 F30000 G1 X27.252 Y31.21 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z3.2 F30000 G1 X-28.09 Y-52.948 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45573 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.945 E.32009 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32013 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45573 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z3.2 F30000 G1 X7.055 Y-53.79 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z3.2 F30000 G1 X-40.155 Y-5.355 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.186 J1.445 E.44457 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.428 Y60.023 I-1.446 J1.448 E.19539 G1 X22.649 Y60.355 E.01324 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.574 Y60.02 I-1.446 J1.449 E.19527 G1 X-46.351 Y60.355 E.01337 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.186 J-1.445 E.44457 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.285 Y-2.757 Z3.2 F30000 G1 X-48.797 Y-.861 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.733 Y-1.033 E.00564 G3 X-47.225 Y-2.143 I1.924 J1.033 E.05945 G1 X-46.994 Y-2.176 E.00718 G3 X-48.898 Y-.636 I.185 J2.176 E.34174 G1 X-48.813 Y-.825 E.00634 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.733 Y-1.033 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.374 Y-2.106 ;WIPE_END G1 X-47.229 Y5.525 Z3.2 F30000 G1 X-46.197 Y59.802 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.301 Y59.601 E.00697 G3 X-45.216 Y57.444 I1.492 J-.6 E.0839 G1 X-44.991 Y57.402 E.00703 G3 X-46.183 Y59.836 I.182 J1.598 E.21151 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.301 Y59.601 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.031 Y57.966 ;WIPE_END G1 X-38.401 Y58.17 Z3.2 F30000 G1 X22.804 Y59.802 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.706 Y59.619 E.00638 G3 X23.784 Y57.444 I1.485 J-.618 E.08451 G1 X24.009 Y57.402 E.00703 G3 X22.817 Y59.836 I.182 J1.598 E.21149 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.706 Y59.619 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.968 Y57.967 ;WIPE_END G1 X17.58 Y52.562 Z3.2 F30000 G1 X-40.59 Y-5.79 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-41.858 Y-3.761 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.858 Y-4.737 E.03237 G1 X-41.205 Y-4.737 E.02165 G2 X-40.761 Y-4.071 I1.783 J-.708 E.02675 G1 X-40.159 Y-3.416 E.02951 G3 X-40.108 Y-1.778 I-1.503 J.867 E.05661 G3 X-40.995 Y-.795 I-19.264 J-16.497 E.04392 G2 X-41.046 Y.843 I1.503 J.867 E.05661 G2 X-40.159 Y1.826 I19.264 J-16.497 E.04392 G3 X-40.108 Y3.464 I-1.503 J.867 E.05661 G3 X-40.995 Y4.446 I-19.266 J-16.499 E.04392 G2 X-41.046 Y6.084 I1.503 J.867 E.05661 G2 X-40.159 Y7.067 I19.264 J-16.497 E.04392 G3 X-40.108 Y8.705 I-1.503 J.867 E.05661 G3 X-40.995 Y9.688 I-19.265 J-16.498 E.04392 G2 X-41.046 Y11.326 I1.503 J.867 E.05661 G2 X-40.159 Y12.308 I19.264 J-16.497 E.04392 G3 X-40.108 Y13.946 I-1.503 J.867 E.05661 G3 X-40.995 Y14.929 I-19.265 J-16.498 E.04392 G2 X-41.046 Y16.567 I1.503 J.867 E.05661 G2 X-40.159 Y17.55 I19.266 J-16.499 E.04392 G1 X-39.912 Y18.205 E.02322 G1 X-39.924 Y18.408 E.00674 G1 X-37.368 Y18.408 E.08478 G1 X-37.292 Y18.205 E.00719 G1 X-37.329 Y17.55 E.02177 G2 X-38.375 Y16.239 I-3.961 J2.088 E.05593 G3 X-38.426 Y14.601 I1.503 J-.867 E.05661 G3 X-37.539 Y13.619 I19.264 J16.497 E.04392 G2 X-37.488 Y11.981 I-1.503 J-.867 E.05661 G2 X-38.375 Y10.998 I-19.265 J16.498 E.04392 G3 X-38.426 Y9.36 I1.503 J-.867 E.05661 G3 X-37.539 Y8.377 I19.264 J16.497 E.04392 G2 X-37.488 Y6.739 I-1.503 J-.867 E.05661 G2 X-38.375 Y5.757 I-19.265 J16.498 E.04392 G3 X-38.426 Y4.119 I1.503 J-.867 E.05661 G3 X-37.539 Y3.136 I19.264 J16.497 E.04392 G2 X-37.488 Y1.498 I-1.503 J-.867 E.05661 G2 X-38.375 Y.515 I-19.264 J16.497 E.04392 G3 X-38.426 Y-1.123 I1.503 J-.867 E.05661 G3 X-37.539 Y-2.105 I19.266 J16.499 E.04392 G2 X-37.488 Y-3.743 I-1.503 J-.867 E.05661 G2 X-38.375 Y-4.726 I-19.264 J16.497 E.04392 G3 X-38.426 Y-6.364 I1.503 J-.867 E.05661 G1 X-38.388 Y-6.408 E.00193 G1 X-35.413 Y-6.408 E.09867 G2 X-35.392 Y-3.932 I.966 J1.23 E.09475 G1 X-35.392 Y-1.189 E.091 G2 X-35.392 Y1.309 I.965 J1.249 E.0956 G1 X-35.392 Y4.052 E.091 G2 X-35.392 Y6.55 I.965 J1.249 E.0956 G1 X-35.392 Y9.294 E.091 G2 X-35.392 Y11.792 I.965 J1.249 E.0956 G1 X-35.392 Y14.535 E.091 G2 X-35.392 Y17.033 I.965 J1.249 E.0956 G1 X-35.392 Y18.408 E.0456 G1 X-35.646 Y18.408 E.00842 G1 X-39.825 Y18.8 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-41.968 Y18.8 E.06587 ;WIDTH:0.436258 G1 X-42.093 Y18.737 E.00447 ;WIDTH:0.468776 G1 X-42.218 Y18.675 E.00484 ;WIDTH:0.507391 G1 X-42.301 Y18.561 E.00535 ;WIDTH:0.511457 G1 X-42.319 Y18.769 E.00801 ;WIDTH:0.474874 G1 X-42.338 Y18.978 E.00738 ;WIDTH:0.421301 G1 X-42.356 Y19.187 E.00647 G1 X-42.356 Y21.331 E.0661 G1 X-39.853 Y18.828 E.10914 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.735 Y19.177 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G2 X-41.979 Y19.187 I-.44 J21.978 E.03822 G1 X-41.979 Y20.421 E.0379 G1 X-40.763 Y19.205 E.05282 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.593 Y19.503 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.394406 G1 F15000 G1 X-41.658 Y19.541 E.00218 G1 X-41.591 Y19.576 E.00218 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.303 Y17.744 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.526088 G1 F15000 G1 X-42.303 Y18.521 E.03056 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.321 Y16.597 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.556949 G1 F14888.387 G1 X-43.208 Y17.485 E.05255 G1 X-42.544 Y17.485 E.0278 G1 X-42.303 Y17.744 E.01486 G3 X-42.321 Y16.637 I15.762 J-.813 E.04638 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.227 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.422094 G1 F15000 G1 X-42.25 Y15.944 E.08642 G1 X-42.25 Y15.839 E.00325 G1 X-42.267 Y15.821 E.00076 G1 X-42.267 Y15.425 E.01224 G1 X-44.594 Y17.752 E.10167 G1 X-45.13 Y17.752 E.01657 G1 X-42.267 Y14.889 E.1251 G1 X-42.267 Y14.353 E.01657 G1 X-45.666 Y17.752 E.14853 G1 X-46.203 Y17.752 E.01657 G1 X-42.267 Y13.817 E.17196 G1 X-42.267 Y13.28 E.01657 G1 X-46.739 Y17.752 E.19539 G1 X-47.275 Y17.752 E.01657 G1 X-42.267 Y12.744 E.21882 G1 X-42.267 Y12.208 E.01657 G1 X-47.811 Y17.752 E.24226 G1 X-47.838 Y17.752 E.00083 G1 X-47.838 Y17.548 E.00629 G1 X-48.144 Y17.548 E.00945 G1 X-42.267 Y11.672 E.25679 G1 X-42.267 Y11.135 E.01657 G1 X-48.552 Y17.42 E.27461 G1 X-48.552 Y16.884 E.01657 G1 X-42.267 Y10.599 E.27461 G1 X-42.267 Y10.063 E.01657 G1 X-48.552 Y16.347 E.27461 G1 X-48.552 Y15.811 E.01657 G1 X-42.267 Y9.527 E.27461 G1 X-42.267 Y8.99 E.01657 G1 X-48.552 Y15.275 E.27461 G1 X-48.552 Y14.739 E.01657 G1 X-42.267 Y8.454 E.27461 G1 X-42.267 Y7.918 E.01657 G1 X-48.552 Y14.203 E.27461 G1 X-48.552 Y13.666 E.01657 G1 X-42.267 Y7.382 E.27461 G1 X-42.267 Y6.845 E.01657 G1 X-48.552 Y13.13 E.27461 G1 X-48.552 Y12.594 E.01657 G1 X-42.267 Y6.309 E.27461 G1 X-42.267 Y5.773 E.01657 G1 X-48.552 Y12.058 E.27461 G1 X-48.552 Y11.521 E.01657 G1 X-42.267 Y5.237 E.27461 G1 X-42.267 Y4.701 E.01657 G1 X-48.552 Y10.985 E.27461 G1 X-48.552 Y10.449 E.01657 G1 X-42.267 Y4.164 E.27461 G1 X-42.267 Y3.628 E.01657 G1 X-48.552 Y9.913 E.27461 G1 X-48.552 Y9.376 E.01657 G1 X-42.267 Y3.092 E.27461 G1 X-42.267 Y2.556 E.01657 G1 X-48.552 Y8.84 E.27461 G1 X-48.552 Y8.304 E.01657 G1 X-42.267 Y2.019 E.27461 G1 X-42.267 Y1.483 E.01657 G1 X-48.552 Y7.768 E.27461 G1 X-48.552 Y7.232 E.01657 G1 X-42.267 Y.947 E.27461 G1 X-42.267 Y.411 E.01657 G1 X-48.552 Y6.695 E.27461 G1 X-48.552 Y6.159 E.01657 G1 X-45.172 Y2.779 E.14769 G3 X-46.065 Y3.136 I-1.476 J-2.398 E.02987 G1 X-48.552 Y5.623 E.10866 G1 X-48.552 Y5.087 E.01657 G1 X-46.684 Y3.219 E.08161 G3 X-47.198 Y3.197 I-.111 J-3.417 E.01592 G1 X-48.552 Y4.55 E.05914 G1 X-48.552 Y4.014 E.01657 G1 X-47.646 Y3.108 E.03958 G3 X-48.047 Y2.973 I1.32 J-4.574 E.01308 G1 X-48.722 Y3.648 E.02948 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.392 Y2.903 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-48.456 Y2.94 E.00204 G1 X-48.391 Y2.975 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.135 Y1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.393958 G1 F12000 G3 X-49.211 Y.863 I8.103 J-1.76 E.0117 ;WIDTH:0.344555 G1 X-49.232 Y.745 E.00294 ;WIDTH:0.307217 G1 X-49.248 Y.613 E.00286 ;WIDTH:0.276404 G1 X-49.263 Y.495 E.00226 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00752 G1 X-49.264 Y-.485 E.00748 ;WIDTH:0.275113 G1 X-49.248 Y-.613 E.00245 ;WIDTH:0.305489 G1 X-49.234 Y-.731 E.00254 ;WIDTH:0.342223 G1 X-49.211 Y-.863 E.00326 ;WIDTH:0.385475 G1 X-49.191 Y-.981 E.00334 ;WIDTH:0.409514 G1 X-49.135 Y-1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.191 Y-.981 ;WIPE_END G1 X-42.25 Y.027 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-42.25 Y-4.556 E.14083 G1 X-48.356 Y-4.556 E.18762 G1 X-48.356 Y-3.031 E.04686 G1 X-48.092 Y-3.167 E.00913 G1 X-47.48 Y-3.352 E.01964 G1 X-46.818 Y-3.42 E.02043 G1 X-46.151 Y-3.358 E.02059 G1 X-45.508 Y-3.167 E.0206 G1 X-44.915 Y-2.854 E.0206 G1 X-44.395 Y-2.431 E.0206 G1 X-43.967 Y-1.915 E.0206 G1 X-43.648 Y-1.326 E.0206 G1 X-43.45 Y-.685 E.0206 G1 X-43.38 Y-.018 E.0206 G1 X-43.442 Y.649 E.0206 G1 X-43.627 Y1.272 E.01996 G1 X-42.383 Y.027 E.05407 G1 X-42.29 Y.027 E.00287 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.634 Y-.244 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.425451 G1 F15000 G3 X-42.627 Y-4.179 I275.103 J-1.465 E.12264 G2 X-47.501 Y-4.162 I-1.629 J230.506 E.15195 ;WIDTH:0.471849 G1 X-47.949 Y-4.149 E.01564 G1 X-47.949 Y-3.635 E.01794 G1 X-47.481 Y-3.751 E.01683 ;WIDTH:0.430251 G1 X-46.855 Y-3.797 E.01983 G1 X-46.112 Y-3.75 E.02348 G1 X-45.399 Y-3.527 E.02359 G1 X-44.738 Y-3.186 E.02348 G1 X-44.156 Y-2.723 E.02348 G1 X-43.675 Y-2.154 E.02348 G1 X-43.315 Y-1.503 E.02348 G1 X-43.079 Y-.798 E.02349 G1 X-42.998 Y-.056 E.02354 G1 X-43.002 Y.103 E.00504 G1 X-42.663 Y-.217 E.01473 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.004 Y-1.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-43.004 Y-3.802 E.06392 G1 X-45.089 Y-3.802 E.06407 G1 X-44.56 Y-3.519 E.01844 G1 X-43.916 Y-3.014 E.02513 G1 X-43.384 Y-2.394 E.02513 G1 X-43.024 Y-1.756 E.0225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.346 Y-2.887 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.350446 G1 F15000 G1 X-43.346 Y-3.459 E.01433 G1 X-43.919 Y-3.459 E.01436 G1 X-43.521 Y-3.101 E.01343 G1 X-43.372 Y-2.918 E.00591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.138 Y6.613 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419998 G1 F15000 G1 X-35.208 Y6.654 E.00251 G1 X-35.134 Y6.689 E.00252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.246 Y7.888 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-33.495 Y7.137 E.03264 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.985 Y7.161 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-33.274 Y6.637 E.01838 G1 X-33.336 Y6.445 E.0062 G1 X-34.6 Y7.709 E.05495 G1 X-34.623 Y8.799 E.03348 G1 X-33.013 Y7.189 E.06996 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.487 Y7.196 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-32.786 Y6.784 E.01566 G1 X-32.946 Y6.441 E.01161 G1 X-33.118 Y5.795 E.02053 G1 X-33.125 Y5.701 E.0029 G1 X-34.867 Y7.443 E.07568 G1 X-35 Y7.443 E.0041 G1 X-35 Y9.709 E.06964 G1 X-32.515 Y7.224 E.10799 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-33.929 Y8.638 ;WIPE_END G1 X-29.677 Y2.3 Z3.2 F30000 G1 X-29.525 Y2.073 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.381373 G1 F15000 G1 X-30.044 Y2.593 E.02025 G1 X-29.525 Y2.701 E.01463 G1 X-29.525 Y2.113 E.0162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.3 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 X-48.3 Y37.744 F30000 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 X-48.409 Y52.537 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-48.472 Y52.574 E.00204 G1 X-48.407 Y52.608 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.592 Y52.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-47.655 Y52.337 E.00204 G1 X-47.59 Y52.371 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.534 Y59.534 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.388844 G1 F15000 G1 X-47.599 Y59.571 E.00211 G1 X-47.532 Y59.606 E.00211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.476 Y59.676 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-48.199 Y59.689 E.00766 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-48.476 Y59.676 ;WIPE_END G1 X-40.843 Y59.652 Z3.2 F30000 G1 X21.405 Y59.464 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.504648 G1 F15000 G2 X21.414 Y59.548 I-.028 J.046 E.0089 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X21.405 Y59.564 G1 X21.347 Y59.564 G1 X21.318 Y59.514 G1 X21.347 Y59.464 G1 X21.405 Y59.464 ;WIPE_END G1 X25.555 Y56.928 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420206 G1 F15000 G1 X27.952 Y54.531 E.10423 G1 X27.952 Y53.997 E.0164 G1 X25.337 Y56.612 E.11367 G2 X24.953 Y56.462 I-.759 J1.384 E.01271 G1 X27.952 Y53.464 E.13038 G1 X27.952 Y52.93 E.0164 G1 X24.512 Y56.37 E.14955 G2 X23.985 Y56.363 I-.288 J1.999 E.01626 G1 X28.066 Y52.282 E.17745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.757 Y58.591 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X20.596 Y59.752 E.05048 G1 X20.063 Y59.752 E.0164 G1 X21.711 Y58.104 E.07165 G3 X23.304 Y56.511 I2.447 J.854 E.07166 G1 X27.363 Y52.452 E.17649 G1 X27.238 Y52.452 E.00384 G1 X27.238 Y52.248 E.00626 G1 X27.033 Y52.248 E.0063 G1 X19.529 Y59.752 E.32625 G1 X18.996 Y59.752 E.0164 G1 X26.5 Y52.248 E.32625 G1 X25.966 Y52.248 E.0164 G1 X18.462 Y59.752 E.32625 G1 X17.929 Y59.752 E.0164 G1 X25.432 Y52.248 E.32625 G1 X24.899 Y52.248 E.0164 G1 X17.395 Y59.752 E.32625 G1 X16.862 Y59.752 E.0164 G1 X24.365 Y52.248 E.32625 G1 X23.832 Y52.248 E.0164 G1 X16.328 Y59.752 E.32625 G1 X15.794 Y59.752 E.0164 G1 X23.298 Y52.248 E.32625 G1 X22.765 Y52.248 E.0164 G1 X15.261 Y59.752 E.32625 G1 X14.727 Y59.752 E.0164 G1 X22.231 Y52.248 E.32625 G1 X21.952 Y52.248 E.00858 G1 X21.952 Y51.994 E.00782 G1 X14.194 Y59.752 E.33731 G1 X13.66 Y59.752 E.0164 G1 X21.952 Y51.46 E.36051 G1 X21.952 Y50.927 E.0164 G1 X13.127 Y59.752 E.38371 G1 X12.593 Y59.752 E.0164 G1 X21.952 Y50.393 E.40691 G1 X21.952 Y49.859 E.0164 G1 X12.059 Y59.752 E.43011 G1 X11.526 Y59.752 E.0164 G1 X21.952 Y49.326 E.45331 G1 X21.952 Y48.792 E.0164 G1 X10.992 Y59.752 E.47651 G1 X10.459 Y59.752 E.0164 G1 X21.952 Y48.259 E.4997 G1 X21.952 Y47.725 E.0164 G1 X9.925 Y59.752 E.5229 G1 X9.392 Y59.752 E.0164 G1 X21.952 Y47.192 E.5461 G1 X21.952 Y46.658 E.0164 G1 X8.858 Y59.752 E.5693 G1 X8.325 Y59.752 E.0164 G1 X21.952 Y46.125 E.5925 G1 X21.952 Y45.591 E.0164 G1 X7.791 Y59.752 E.6157 G1 X7.257 Y59.752 E.0164 G1 X21.952 Y45.057 E.6389 G1 X21.952 Y44.524 E.0164 G1 X6.724 Y59.752 E.66209 G1 X6.19 Y59.752 E.0164 G1 X21.952 Y43.99 E.68529 G1 X21.952 Y43.457 E.0164 G1 X5.657 Y59.752 E.70849 G1 X5.123 Y59.752 E.0164 G1 X21.952 Y42.923 E.73169 G1 X21.952 Y42.39 E.0164 G1 X4.59 Y59.752 E.75489 G1 X4.056 Y59.752 E.0164 G1 X21.952 Y41.856 E.77809 G1 X21.952 Y41.322 E.0164 G1 X3.522 Y59.752 E.80129 G1 X2.989 Y59.752 E.0164 G1 X21.952 Y40.789 E.82448 G1 X21.952 Y40.255 E.0164 G1 X2.455 Y59.752 E.84768 G1 X1.922 Y59.752 E.0164 G1 X21.952 Y39.722 E.87088 G1 X21.952 Y39.188 E.0164 G1 X1.388 Y59.752 E.89408 G1 X.855 Y59.752 E.0164 G1 X22.122 Y38.485 E.92466 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.886 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y35.856 E.08981 G1 X27.952 Y35.322 E.0164 G1 X25.522 Y37.752 E.10563 G1 X24.989 Y37.752 E.0164 G1 X27.952 Y34.789 E.12883 G1 X27.952 Y34.255 E.0164 G1 X24.455 Y37.752 E.15203 G1 X23.922 Y37.752 E.0164 G1 X27.952 Y33.722 E.17522 G1 X27.952 Y33.188 E.0164 G1 X23.388 Y37.752 E.19842 G1 X22.855 Y37.752 E.0164 G1 X27.952 Y32.655 E.22162 G1 X27.952 Y32.452 E.00624 G1 X27.621 Y32.452 E.01016 G1 X22.321 Y37.752 E.23045 G1 X21.952 Y37.752 E.01135 G1 X21.952 Y38.121 E.01135 G1 X.321 Y59.752 E.94048 G1 X-.212 Y59.752 E.0164 G1 X27.238 Y32.301 E1.19351 G1 X27.238 Y32.248 E.00164 G1 X26.758 Y32.248 E.01477 G1 X-.746 Y59.752 E1.19583 G1 X-1.28 Y59.752 E.0164 G1 X26.224 Y32.248 E1.19583 G1 X25.691 Y32.248 E.0164 G1 X-1.813 Y59.752 E1.19583 G1 X-2.347 Y59.752 E.0164 G1 X25.157 Y32.248 E1.19583 G1 X24.624 Y32.248 E.0164 G1 X-2.88 Y59.752 E1.19583 G1 X-3.414 Y59.752 E.0164 G1 X24.09 Y32.248 E1.19583 G1 X23.556 Y32.248 E.0164 G1 X-3.947 Y59.752 E1.19583 G1 X-4.481 Y59.752 E.0164 G1 X23.023 Y32.248 E1.19583 G1 X22.489 Y32.248 E.0164 G1 X-5.015 Y59.752 E1.19583 G1 X-5.548 Y59.752 E.0164 G1 X21.956 Y32.248 E1.19583 G1 X21.952 Y31.718 E.01629 G1 X-6.082 Y59.752 E1.21886 G1 X-6.615 Y59.752 E.0164 G1 X21.952 Y31.185 E1.24206 G1 X21.952 Y30.651 E.0164 G1 X4.948 Y47.655 E.7393 G1 X4.948 Y47.121 E.0164 G1 X21.952 Y30.118 E.7393 G1 X21.952 Y29.584 E.0164 G1 X4.948 Y46.588 E.7393 G1 X4.948 Y46.054 E.0164 G1 X21.952 Y29.051 E.7393 G1 X21.952 Y28.517 E.0164 G1 X4.948 Y45.521 E.7393 G1 X4.948 Y44.987 E.0164 G1 X21.952 Y27.983 E.7393 G1 X21.952 Y27.45 E.0164 G1 X4.948 Y44.454 E.7393 G1 X4.948 Y43.92 E.0164 G1 X21.952 Y26.916 E.7393 G1 X21.952 Y26.383 E.0164 G1 X4.948 Y43.386 E.7393 G1 X4.948 Y42.853 E.0164 G1 X21.952 Y25.849 E.7393 G1 X21.952 Y25.316 E.0164 G1 X4.948 Y42.319 E.7393 G1 X4.948 Y41.786 E.0164 G1 X21.952 Y24.782 E.7393 G1 X21.952 Y24.248 E.0164 G1 X4.948 Y41.252 E.7393 G1 X4.948 Y40.719 E.0164 G1 X21.952 Y23.715 E.7393 G1 X21.952 Y23.181 E.0164 G1 X4.948 Y40.185 E.7393 G1 X4.948 Y39.652 E.0164 G1 X21.952 Y22.648 E.7393 G1 X21.952 Y22.114 E.0164 G1 X4.948 Y39.118 E.7393 G1 X4.948 Y38.584 E.0164 G1 X21.952 Y21.581 E.7393 G1 X21.952 Y21.047 E.0164 G1 X4.948 Y38.051 E.7393 G1 X4.948 Y37.752 E.00919 M73 P46 R42 G1 X4.714 Y37.752 E.00721 G1 X21.952 Y20.514 E.7495 G1 X21.952 Y19.98 E.0164 G1 X4.18 Y37.752 E.7727 G1 X3.646 Y37.752 E.0164 G1 X21.952 Y19.446 E.7959 G1 X21.952 Y18.913 E.0164 G1 X3.113 Y37.752 E.8191 G1 X2.579 Y37.752 E.0164 G1 X22.122 Y18.21 E.84967 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.611 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y15.581 E.10178 G1 X27.952 Y15.047 E.0164 G1 X25.247 Y17.752 E.1176 G1 X24.714 Y17.752 E.0164 G1 X27.952 Y14.514 E.1408 G1 X27.952 Y13.98 E.0164 G1 X24.18 Y17.752 E.164 G1 X23.646 Y17.752 E.0164 G1 X27.952 Y13.446 E.1872 G1 X27.952 Y12.913 E.0164 G1 X23.113 Y17.752 E.2104 G1 X22.579 Y17.752 E.0164 G1 X27.952 Y12.379 E.23359 G1 X27.952 Y11.846 E.0164 G1 X21.65 Y18.148 E.27401 G1 X21.65 Y18.597 E.0138 G1 X21.447 Y18.8 E.00884 G1 X20.998 Y18.8 E.0138 G1 X2.046 Y37.752 E.82401 G1 X1.512 Y37.752 E.0164 G1 X20.464 Y18.8 E.82401 G1 X19.931 Y18.8 E.0164 G1 X4.948 Y33.782 E.65142 G1 X4.948 Y34.248 E.01432 G1 X4.482 Y34.248 E.01432 G1 X.979 Y37.752 E.15234 G1 X.445 Y37.752 E.0164 G1 X3.949 Y34.248 E.15234 G1 X3.415 Y34.248 E.0164 G1 X-.089 Y37.752 E.15234 G1 X-.622 Y37.752 E.0164 G1 X2.882 Y34.248 E.15234 G1 X2.348 Y34.248 E.0164 G1 X-1.156 Y37.752 E.15234 G1 X-1.689 Y37.752 E.0164 G1 X1.815 Y34.248 E.15234 G1 X1.281 Y34.248 E.0164 G1 X-2.223 Y37.752 E.15234 G1 X-2.756 Y37.752 E.0164 G1 X.747 Y34.248 E.15234 G1 X.214 Y34.248 E.0164 G1 X-3.29 Y37.752 E.15234 G1 X-3.823 Y37.752 E.0164 G1 X-.32 Y34.248 E.15234 G1 X-.853 Y34.248 E.0164 G1 X-4.357 Y37.752 E.15234 G1 X-4.891 Y37.752 E.0164 G1 X-1.387 Y34.248 E.15234 G1 X-1.92 Y34.248 E.0164 G1 X-5.424 Y37.752 E.15234 G1 X-5.958 Y37.752 E.0164 M73 P47 R42 G1 X-2.454 Y34.248 E.15234 G1 X-2.988 Y34.248 E.0164 G1 X-6.491 Y37.752 E.15234 G1 X-7.025 Y37.752 E.0164 G1 X-3.521 Y34.248 E.15234 G1 X-4.055 Y34.248 E.0164 G1 X-7.558 Y37.752 E.15234 G1 X-8.092 Y37.752 E.0164 G1 X-4.588 Y34.248 E.15234 G1 X-5.122 Y34.248 E.0164 G1 X-8.626 Y37.752 E.15234 G1 X-9.159 Y37.752 E.0164 G1 X-5.655 Y34.248 E.15234 G1 X-6.189 Y34.248 E.0164 G1 X-9.693 Y37.752 E.15234 G1 X-10.226 Y37.752 E.0164 G1 X-6.722 Y34.248 E.15234 G1 X-7.256 Y34.248 E.0164 G1 X-10.76 Y37.752 E.15234 G1 X-11.293 Y37.752 E.0164 G1 X-7.79 Y34.248 E.15234 G1 X-8.323 Y34.248 E.0164 G1 X-11.827 Y37.752 E.15234 G1 X-12.361 Y37.752 E.0164 G1 X-8.857 Y34.248 E.15234 G1 X-9.39 Y34.248 E.0164 G1 X-12.894 Y37.752 E.15234 G1 X-13.428 Y37.752 E.0164 G1 X-9.924 Y34.248 E.15234 G1 X-10.457 Y34.248 E.0164 G1 X-13.961 Y37.752 E.15234 G1 X-14.495 Y37.752 E.0164 G1 X-10.991 Y34.248 E.15234 G1 X-11.525 Y34.248 E.0164 G1 X-15.028 Y37.752 E.15234 G1 X-15.562 Y37.752 E.0164 G1 X-12.058 Y34.248 E.15234 G1 X-12.592 Y34.248 E.0164 G1 X-16.095 Y37.752 E.15234 G1 X-16.629 Y37.752 E.0164 G1 X-13.125 Y34.248 E.15234 G1 X-13.659 Y34.248 E.0164 G1 X-17.163 Y37.752 E.15234 G1 X-17.696 Y37.752 E.0164 G1 X-14.192 Y34.248 E.15234 G1 X-14.726 Y34.248 E.0164 G1 X-18.23 Y37.752 E.15234 G1 X-18.763 Y37.752 E.0164 G1 X-15.259 Y34.248 E.15234 G1 X-15.793 Y34.248 E.0164 G1 X-19.297 Y37.752 E.15234 G1 X-19.83 Y37.752 E.0164 G1 X-16.327 Y34.248 E.15234 G1 X-16.86 Y34.248 E.0164 G1 X-20.364 Y37.752 E.15234 G1 X-20.898 Y37.752 E.0164 G1 X-17.394 Y34.248 E.15234 G1 X-17.927 Y34.248 E.0164 G1 X-21.431 Y37.752 E.15234 G1 X-21.965 Y37.752 E.0164 G1 X-18.461 Y34.248 E.15234 G1 X-18.994 Y34.248 E.0164 G1 X-22.498 Y37.752 E.15234 G1 X-23.032 Y37.752 E.0164 G1 X-19.528 Y34.248 E.15234 G1 X-20.062 Y34.248 E.0164 G1 X-23.565 Y37.752 E.15234 G1 X-24.099 Y37.752 E.0164 G1 X-20.595 Y34.248 E.15234 G1 X-21.129 Y34.248 E.0164 G1 X-24.802 Y37.922 E.15972 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-23.388 Y36.507 ;WIPE_END G1 X-16.337 Y39.43 Z3.2 F30000 G1 X4.525 Y48.078 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-7.149 Y59.752 E.50755 G1 X-7.682 Y59.752 E.0164 G1 X3.821 Y48.248 E.50017 G1 X3.288 Y48.248 E.0164 G1 X-8.216 Y59.752 E.50017 G1 X-8.749 Y59.752 E.0164 G1 X2.754 Y48.248 E.50017 G1 X2.221 Y48.248 E.0164 G1 X-9.283 Y59.752 E.50017 G1 X-9.817 Y59.752 E.0164 G1 X1.687 Y48.248 E.50017 G1 X1.154 Y48.248 E.0164 G1 X-10.35 Y59.752 E.50017 G1 X-10.884 Y59.752 E.0164 G1 X.62 Y48.248 E.50017 G1 X.086 Y48.248 E.0164 G1 X-11.417 Y59.752 E.50017 G1 X-11.951 Y59.752 E.0164 G1 X-.447 Y48.248 E.50017 G1 X-.981 Y48.248 E.0164 G1 X-12.484 Y59.752 E.50017 G1 X-13.018 Y59.752 E.0164 G1 X-1.514 Y48.248 E.50017 G1 X-2.048 Y48.248 E.0164 G1 X-13.552 Y59.752 E.50017 G1 X-14.085 Y59.752 E.0164 G1 X-2.581 Y48.248 E.50017 G1 X-3.115 Y48.248 E.0164 G1 X-14.619 Y59.752 E.50017 G1 X-15.152 Y59.752 E.0164 G1 X-3.648 Y48.248 E.50017 G1 X-4.182 Y48.248 E.0164 G1 X-15.686 Y59.752 E.50017 G1 X-16.219 Y59.752 E.0164 G1 X-4.716 Y48.248 E.50017 G1 X-5.249 Y48.248 E.0164 G1 X-16.753 Y59.752 E.50017 G1 X-17.286 Y59.752 E.0164 G1 X-5.783 Y48.248 E.50017 G1 X-6.316 Y48.248 E.0164 G1 X-17.82 Y59.752 E.50017 G1 X-18.354 Y59.752 E.0164 G1 X-6.85 Y48.248 E.50017 G1 X-7.383 Y48.248 E.0164 G1 X-18.887 Y59.752 E.50017 G1 X-19.421 Y59.752 E.0164 G1 X-7.917 Y48.248 E.50017 G1 X-8.451 Y48.248 E.0164 G1 X-19.954 Y59.752 E.50017 G1 X-20.488 Y59.752 E.0164 G1 X-8.984 Y48.248 E.50017 G1 X-9.518 Y48.248 E.0164 G1 X-21.021 Y59.752 E.50017 G1 X-21.555 Y59.752 E.0164 G1 X-10.051 Y48.248 E.50017 G1 X-10.585 Y48.248 E.0164 G1 X-22.089 Y59.752 E.50017 G1 X-22.622 Y59.752 E.0164 G1 X-11.118 Y48.248 E.50017 G1 X-11.652 Y48.248 E.0164 G1 X-23.156 Y59.752 E.50017 G1 X-23.689 Y59.752 E.0164 G1 X-12.185 Y48.248 E.50017 G1 X-12.719 Y48.248 E.0164 G1 X-24.223 Y59.752 E.50017 G1 X-24.756 Y59.752 E.0164 G1 X-13.253 Y48.248 E.50017 G1 X-13.786 Y48.248 E.0164 G1 X-25.29 Y59.752 E.50017 G1 X-25.824 Y59.752 E.0164 G1 X-14.32 Y48.248 E.50017 G1 X-14.853 Y48.248 E.0164 G1 X-26.357 Y59.752 E.50017 G1 X-26.891 Y59.752 E.0164 G1 X-15.387 Y48.248 E.50017 G1 X-15.92 Y48.248 E.0164 G1 X-27.424 Y59.752 E.50017 G1 X-27.958 Y59.752 E.0164 G1 X-16.454 Y48.248 E.50017 G1 X-16.988 Y48.248 E.0164 G1 X-28.491 Y59.752 E.50017 G1 X-29.025 Y59.752 E.0164 G1 X-17.521 Y48.248 E.50017 G1 X-18.055 Y48.248 E.0164 G1 X-29.558 Y59.752 E.50017 G1 X-30.092 Y59.752 E.0164 G1 X-18.588 Y48.248 E.50017 G1 X-19.122 Y48.248 E.0164 G1 X-30.626 Y59.752 E.50017 G1 X-31.159 Y59.752 E.0164 G1 X-19.655 Y48.248 E.50017 G1 X-20.189 Y48.248 E.0164 G1 X-31.693 Y59.752 E.50017 G1 X-32.226 Y59.752 E.0164 G1 X-20.722 Y48.248 E.50017 G1 X-21.256 Y48.248 E.0164 G1 X-32.76 Y59.752 E.50017 G1 X-33.293 Y59.752 E.0164 G1 X-21.79 Y48.248 E.50017 G1 X-22.323 Y48.248 E.0164 G1 X-33.827 Y59.752 E.50017 G1 X-34.361 Y59.752 E.0164 G1 X-22.857 Y48.248 E.50017 G1 X-23.39 Y48.248 E.0164 G1 X-34.894 Y59.752 E.50017 G1 X-35.428 Y59.752 E.0164 G1 X-23.924 Y48.248 E.50017 G1 X-24.457 Y48.248 E.0164 G1 X-35.961 Y59.752 E.50017 G1 X-36.495 Y59.752 E.0164 G1 X-24.991 Y48.248 E.50017 G1 X-25.525 Y48.248 E.0164 G1 X-37.028 Y59.752 E.50017 G1 X-37.562 Y59.752 E.0164 G1 X-25.548 Y47.738 E.52234 G1 X-25.548 Y47.205 E.0164 G1 X-38.095 Y59.752 E.54554 G1 X-38.629 Y59.752 E.0164 G1 X-25.548 Y46.671 E.56874 G1 X-25.548 Y46.137 E.0164 G1 X-39.163 Y59.752 E.59194 G1 X-39.696 Y59.752 E.0164 G1 X-25.548 Y45.604 E.61514 G1 X-25.548 Y45.07 E.0164 G1 X-40.23 Y59.752 E.63834 G1 X-40.763 Y59.752 E.0164 G1 X-25.548 Y44.537 E.66153 G1 X-25.548 Y44.003 E.0164 G1 X-41.297 Y59.752 E.68473 G1 X-41.83 Y59.752 E.0164 G1 X-25.548 Y43.47 E.70793 G1 X-25.548 Y42.936 E.0164 G1 X-42.225 Y59.613 E.72509 G2 X-42.149 Y59.004 I-2.276 J-.591 E.01892 G1 X-25.548 Y42.402 E.7218 G1 X-25.548 Y41.869 E.0164 G1 X-42.199 Y58.519 E.72394 G2 X-42.312 Y58.1 I-1.652 J.222 E.01341 G1 X-25.548 Y41.335 E.72888 G1 X-25.548 Y40.802 E.0164 G1 X-42.477 Y57.73 E.73604 G2 X-42.685 Y57.405 I-1.341 J.627 E.01191 G1 X-25.548 Y40.268 E.74507 G1 X-25.548 Y39.735 E.0164 G1 X-42.933 Y57.119 E.75586 G2 X-43.221 Y56.874 I-1.076 J.972 E.01167 G1 X-25.548 Y39.201 E.76839 G1 X-25.548 Y38.668 E.0164 G1 X-43.548 Y56.668 E.78263 G2 X-43.92 Y56.505 I-.802 J1.328 E.01249 G1 X-25.548 Y38.134 E.79877 G1 X-25.548 Y37.752 E.01175 G1 X-25.166 Y37.752 E.01175 G1 X-21.662 Y34.248 E.15234 G1 X-22.196 Y34.248 E.0164 G1 X-44.342 Y56.394 E.96288 G2 X-44.833 Y56.351 I-.539 J3.346 E.01516 G1 X-22.729 Y34.248 E.96102 G1 X-23.263 Y34.248 E.0164 G1 X-45.709 Y56.695 E.97594 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.267 Y58.785 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.022 Y59.54 E.03282 G1 X-48.067 Y59.495 E.00197 G1 X-48.47 Y59.455 E.01246 G1 X-47.105 Y58.091 E.05933 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y59.173 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-23.796 Y34.248 E1.08371 G1 X-24.33 Y34.248 E.0164 G1 X-48.552 Y58.47 E1.05313 G1 X-48.552 Y57.936 E.0164 G1 X-24.864 Y34.248 E1.02993 G1 X-25.397 Y34.248 E.0164 G1 X-42.552 Y51.403 E.74586 G1 X-42.552 Y50.869 E.0164 G1 X-25.548 Y33.865 E.7393 G1 X-25.548 Y33.332 E.0164 G1 X-42.552 Y50.336 E.7393 G1 X-42.552 Y49.802 E.0164 G1 X-25.548 Y32.798 E.7393 G1 X-25.548 Y32.265 E.0164 G1 X-42.552 Y49.269 E.7393 G1 X-42.552 Y48.735 E.0164 G1 X-25.548 Y31.731 E.7393 G1 X-25.548 Y31.198 E.0164 G1 X-42.552 Y48.201 E.7393 G1 X-42.552 Y47.668 E.0164 G1 X-25.548 Y30.664 E.7393 G1 X-25.548 Y30.131 E.0164 G1 X-42.552 Y47.134 E.7393 G1 X-42.552 Y46.601 E.0164 G1 X-25.548 Y29.597 E.7393 G1 X-25.548 Y29.063 E.0164 G1 X-42.552 Y46.067 E.7393 G1 X-42.552 Y45.534 E.0164 G1 X-25.548 Y28.53 E.7393 G1 X-25.548 Y27.996 E.0164 G1 X-42.552 Y45 E.7393 G1 X-42.552 Y44.467 E.0164 G1 X-25.548 Y27.463 E.7393 G1 X-25.548 Y26.929 E.0164 G1 X-42.552 Y43.933 E.7393 G1 X-42.552 Y43.399 E.0164 G1 X-25.548 Y26.396 E.7393 G1 X-25.548 Y25.862 E.0164 G1 X-42.552 Y42.866 E.7393 G1 X-42.552 Y42.332 E.0164 G1 X-25.548 Y25.328 E.7393 G1 X-25.548 Y24.795 E.0164 G1 X-42.722 Y41.968 E.74668 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.227 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-48.552 Y57.403 E.2315 G1 X-48.552 Y56.869 E.0164 G1 X-43.931 Y52.248 E.20092 G1 X-44.464 Y52.248 E.0164 G1 X-48.552 Y56.336 E.17772 G1 X-48.552 Y55.802 E.0164 G1 X-44.998 Y52.248 E.15452 G1 X-45.531 Y52.248 E.0164 G1 X-48.552 Y55.269 E.13133 G1 X-48.552 Y54.735 E.0164 G1 X-46.065 Y52.248 E.10813 G1 X-46.599 Y52.248 E.0164 G1 X-48.552 Y54.201 E.08493 G1 X-48.552 Y53.668 E.0164 G1 X-47.132 Y52.248 E.06173 G1 X-47.196 Y52.248 E.00197 G1 X-47.613 Y52.665 E.01812 G1 X-47.848 Y52.43 E.01021 G1 X-48.722 Y53.304 E.03799 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-47.848 Y52.43 G1 X-47.613 Y52.665 G1 X-47.307 Y52.359 ;WIPE_END G1 X-40.134 Y49.751 Z3.2 F30000 G1 X4.778 Y33.418 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X19.397 Y18.8 E.6356 G1 X18.864 Y18.8 E.0164 G1 X4.948 Y32.715 E.60503 G1 X4.948 Y32.182 E.0164 G1 X18.33 Y18.8 E.58183 G1 X17.796 Y18.8 E.0164 G1 X4.948 Y31.648 E.55863 G1 X4.948 Y31.115 E.0164 G1 X17.263 Y18.8 E.53543 G1 X16.729 Y18.8 E.0164 G1 X4.948 Y30.581 E.51223 G1 X4.948 Y30.047 E.0164 G1 X16.196 Y18.8 E.48903 G1 X15.662 Y18.8 E.0164 G1 X4.948 Y29.514 E.46583 G1 X4.948 Y28.98 E.0164 G1 X15.129 Y18.8 E.44264 G1 X14.599 Y18.796 E.01628 G1 X4.948 Y28.447 E.41962 G1 X4.948 Y27.913 E.0164 G1 X14.4 Y18.461 E.41097 G1 X14.4 Y17.927 E.0164 G1 X4.948 Y27.38 E.41097 G1 X4.948 Y26.846 E.0164 G1 X14.4 Y17.394 E.41097 G1 X14.4 Y16.86 E.0164 G1 X4.948 Y26.312 E.41097 G1 X4.948 Y25.779 E.0164 G1 X14.4 Y16.327 E.41097 G1 X14.4 Y15.793 E.0164 G1 X4.948 Y25.245 E.41097 G1 X4.948 Y24.712 E.0164 G1 X14.4 Y15.26 E.41097 G1 X14.4 Y14.726 E.0164 G1 X4.948 Y24.178 E.41097 G1 X4.948 Y23.752 E.01311 G1 X4.841 Y23.752 E.0033 G1 X14.4 Y14.193 E.41563 G1 X14.4 Y13.659 E.0164 G1 X4.307 Y23.752 E.43883 G1 X3.774 Y23.752 E.0164 G1 X14.4 Y13.125 E.46202 G1 X14.4 Y12.592 E.0164 G1 X3.24 Y23.752 E.48522 G1 X2.707 Y23.752 E.0164 G1 X14.4 Y12.058 E.50842 G1 X14.4 Y11.525 E.0164 G1 X2.173 Y23.752 E.53162 G1 X1.64 Y23.752 E.0164 G1 X14.4 Y10.991 E.55482 G1 X14.4 Y10.458 E.0164 G1 X1.106 Y23.752 E.57802 G1 X.572 Y23.752 E.0164 G1 X14.4 Y9.924 E.60122 G1 X14.4 Y9.39 E.0164 G1 X.039 Y23.752 E.62442 G1 X-.495 Y23.752 E.0164 G1 X14.4 Y8.857 E.64761 G1 X14.4 Y8.323 E.0164 G1 X-1.028 Y23.752 E.67081 G1 X-1.562 Y23.752 E.0164 G1 X7.942 Y14.248 E.41321 G1 X7.408 Y14.248 E.0164 G1 X-2.095 Y23.752 E.41321 G1 X-2.629 Y23.752 E.0164 G1 X6.875 Y14.248 E.41321 G1 X6.341 Y14.248 E.0164 G1 X-3.163 Y23.752 E.41321 G1 X-3.696 Y23.752 E.0164 G1 X5.808 Y14.248 E.41321 G1 X5.274 Y14.248 E.0164 G1 X-4.23 Y23.752 E.41321 G1 X-4.763 Y23.752 E.0164 G1 X4.741 Y14.248 E.41321 G1 X4.207 Y14.248 E.0164 G1 X-5.297 Y23.752 E.41321 G1 X-5.83 Y23.752 E.0164 G1 X3.673 Y14.248 E.41321 G1 X3.14 Y14.248 E.0164 G1 X-6.364 Y23.752 E.41321 G1 X-6.898 Y23.752 E.0164 G1 X2.606 Y14.248 E.41321 G1 X2.073 Y14.248 E.0164 G1 X-7.431 Y23.752 E.41321 G1 X-7.965 Y23.752 E.0164 G1 X1.539 Y14.248 E.41321 G1 X1.006 Y14.248 E.0164 G1 X-8.498 Y23.752 E.41321 G1 X-9.032 Y23.752 E.0164 G1 X.472 Y14.248 E.41321 G1 X-.062 Y14.248 E.0164 G1 X-9.565 Y23.752 E.41321 G1 X-10.099 Y23.752 E.0164 G1 X-.595 Y14.248 E.41321 G1 X-1.129 Y14.248 E.0164 G1 X-10.632 Y23.752 E.41321 G1 X-11.166 Y23.752 E.0164 G1 X-1.662 Y14.248 E.41321 G1 X-2.196 Y14.248 E.0164 G1 X-11.7 Y23.752 E.41321 G1 X-12.233 Y23.752 E.0164 G1 X-2.729 Y14.248 E.41321 G1 X-3.263 Y14.248 E.0164 G1 X-12.767 Y23.752 E.41321 G1 X-13.3 Y23.752 E.0164 G1 X-3.796 Y14.248 E.41321 G1 X-4.33 Y14.248 E.0164 G1 X-13.834 Y23.752 E.41321 G1 X-14.367 Y23.752 E.0164 G1 X-4.548 Y13.933 E.42693 G1 X-4.548 Y13.399 E.0164 G1 X-14.901 Y23.752 E.45013 G1 X-15.435 Y23.752 E.0164 G1 X-4.548 Y12.865 E.47333 G1 X-4.548 Y12.332 E.0164 G1 X-15.968 Y23.752 E.49652 G1 X-16.502 Y23.752 E.0164 G1 X-4.548 Y11.798 E.51972 G1 X-4.548 Y11.265 E.0164 G1 X-17.035 Y23.752 E.54292 G1 X-17.569 Y23.752 E.0164 G1 X-4.548 Y10.731 E.56612 G1 X-4.548 Y10.198 E.0164 G1 X-18.102 Y23.752 E.58932 G1 X-18.636 Y23.752 E.0164 G1 X-4.548 Y9.664 E.61252 G1 X-4.548 Y9.131 E.0164 G1 X-19.169 Y23.752 E.63572 G1 X-19.703 Y23.752 E.0164 G1 X-4.548 Y8.597 E.65891 G1 X-4.548 Y8.063 E.0164 G1 X-20.237 Y23.752 E.68211 G1 X-20.77 Y23.752 E.0164 G1 X-4.548 Y7.53 E.70531 G1 X-4.548 Y6.996 E.0164 G1 X-21.304 Y23.752 E.72851 G1 X-21.837 Y23.752 E.0164 G1 X-4.548 Y6.463 E.75171 G1 X-4.548 Y5.929 E.0164 G1 X-22.371 Y23.752 E.77491 G1 X-22.904 Y23.752 E.0164 G1 X-4.548 Y5.396 E.79811 G1 X-4.548 Y4.862 E.0164 G1 X-23.438 Y23.752 E.8213 G1 X-23.972 Y23.752 E.0164 G1 X-4.548 Y4.328 E.8445 G1 X-4.548 Y3.795 E.0164 G1 X-24.675 Y23.922 E.87508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y41.435 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.548 Y24.261 E.74668 G1 X-25.548 Y23.752 E.01566 G1 X-25.039 Y23.752 E.01566 G1 X-4.548 Y3.261 E.8909 G1 X-4.548 Y2.728 E.0164 G1 X-42.552 Y40.732 E1.65235 G1 X-42.552 Y40.198 E.0164 G1 X-16.602 Y14.248 E1.12827 G1 X-17.136 Y14.248 E.0164 G1 X-42.552 Y39.664 E1.10507 G1 X-42.552 Y39.131 E.0164 G1 X-17.669 Y14.248 E1.08187 G1 X-18.203 Y14.248 E.0164 G1 X-42.552 Y38.597 E1.05867 G1 X-42.552 Y38.064 E.0164 G1 X-18.736 Y14.248 E1.03547 G1 X-19.27 Y14.248 E.0164 G1 X-42.774 Y37.752 E1.02191 G1 X-43.307 Y37.752 E.0164 G1 X-19.803 Y14.248 E1.02191 G1 X-20.337 Y14.248 E.0164 G1 X-43.841 Y37.752 E1.02191 G1 X-44.374 Y37.752 E.0164 G1 X-20.87 Y14.248 E1.02191 G1 X-21.404 Y14.248 E.0164 G1 X-44.908 Y37.752 E1.02191 G1 X-45.441 Y37.752 E.0164 G1 X-21.938 Y14.248 E1.02191 G1 X-22.471 Y14.248 E.0164 G1 X-45.975 Y37.752 E1.02191 G1 X-46.509 Y37.752 E.0164 G1 X-23.005 Y14.248 E1.02191 G1 X-23.538 Y14.248 E.0164 G1 X-47.042 Y37.752 E1.02191 G1 X-47.576 Y37.752 E.0164 G1 X-24.072 Y14.248 E1.02191 G1 X-24.605 Y14.248 E.0164 G1 X-47.906 Y37.548 E1.01306 G1 X-48.439 Y37.548 E.0164 G1 X-43.139 Y32.248 E.23045 G1 X-43.673 Y32.248 E.0164 G1 X-48.552 Y37.127 E.21215 G1 X-48.552 Y36.594 E.0164 G1 X-44.206 Y32.248 E.18895 G1 X-44.74 Y32.248 E.0164 G1 X-48.552 Y36.06 E.16575 G1 X-48.552 Y35.527 E.0164 G1 X-45.273 Y32.248 E.14255 G1 X-45.807 Y32.248 E.0164 G1 X-48.552 Y34.993 E.11935 G1 X-48.552 Y34.46 E.0164 G1 X-46.34 Y32.248 E.09615 G1 X-46.874 Y32.248 E.0164 G1 X-48.552 Y33.926 E.07295 G1 X-48.552 Y33.392 E.0164 G1 X-47.408 Y32.248 E.04976 G1 X-47.838 Y32.248 E.01324 G1 X-47.838 Y32.452 E.00626 G1 X-48.145 Y32.452 E.00942 G1 X-48.722 Y33.029 E.02509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y31.831 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-25.139 Y14.248 E.76447 G1 X-25.673 Y14.248 E.0164 G1 X-42.552 Y31.127 E.73389 G1 X-42.552 Y30.594 E.0164 G1 X-26.206 Y14.248 E.71069 G1 X-26.74 Y14.248 E.0164 G1 X-42.552 Y30.06 E.68749 G1 X-42.552 Y29.527 E.0164 G1 X-27.273 Y14.248 E.66429 G1 X-27.807 Y14.248 E.0164 G1 X-42.552 Y28.993 E.6411 G1 X-42.552 Y28.46 E.0164 G1 X-28.34 Y14.248 E.6179 G1 X-28.874 Y14.248 E.0164 G1 X-42.552 Y27.926 E.5947 G1 X-42.552 Y27.392 E.0164 G1 X-29.348 Y14.189 E.57408 G1 X-29.348 Y13.655 E.0164 G1 X-42.552 Y26.859 E.57408 G1 X-42.552 Y26.325 E.0164 G1 X-29.348 Y13.122 E.57408 G1 X-29.348 Y12.588 E.0164 G1 X-35 Y18.24 E.24575 G1 X-35 Y18.597 E.01096 G1 X-35.203 Y18.8 E.00884 G1 X-35.56 Y18.8 E.01096 G1 X-42.552 Y25.792 E.304 G1 X-42.552 Y25.258 E.0164 G1 X-36.093 Y18.8 E.28081 G1 X-36.627 Y18.8 E.0164 G1 X-42.552 Y24.725 E.25761 G1 X-42.552 Y24.191 E.0164 G1 X-37.161 Y18.8 E.23441 G1 X-37.694 Y18.8 E.0164 G1 X-42.552 Y23.658 E.21121 G1 X-42.552 Y23.124 E.0164 G1 X-38.228 Y18.8 E.18801 G1 X-38.761 Y18.8 E.0164 G1 X-42.552 Y22.59 E.16481 G1 X-42.552 Y22.057 E.0164 G1 X-39.125 Y18.63 E.14899 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y17.876 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.348 Y12.054 E.25312 G1 X-29.348 Y11.521 E.0164 G1 X-35 Y17.173 E.24575 G1 X-35 Y16.639 E.0164 G1 X-29.348 Y10.987 E.24575 G1 X-29.348 Y10.454 E.0164 G1 X-35 Y16.106 E.24575 G1 X-35 Y15.572 E.0164 G1 X-29.348 Y9.92 E.24575 G1 X-29.348 Y9.387 E.0164 G1 X-35 Y15.039 E.24575 G1 X-35 Y14.505 E.0164 G1 X-29.348 Y8.853 E.24575 G1 X-29.348 Y8.32 E.0164 G1 X-35 Y13.972 E.24575 G1 X-35 Y13.438 E.0164 G1 X-29.476 Y7.914 E.2402 G3 X-30.136 Y8.04 I-.826 J-2.524 E.02072 G1 X-35 Y12.905 E.2115 G1 X-35 Y12.371 E.0164 G1 X-30.655 Y8.026 E.1889 G3 X-31.088 Y7.926 I.134 J-1.556 E.01371 G1 X-35 Y11.837 E.17008 G1 X-35 Y11.304 E.0164 G1 X-31.469 Y7.773 E.15353 G3 X-31.805 Y7.575 I.581 J-1.376 E.01202 G1 X-35 Y10.77 E.13891 G1 X-35 Y10.237 E.0164 G1 X-31.981 Y7.218 E.13125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.683 Y4.718 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-35.151 Y7.186 E.10728 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.982 Y3.017 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-29.348 Y1.383 E.07106 G1 X-29.348 Y.85 E.0164 G1 X-35 Y6.502 E.24575 G1 X-35 Y5.968 E.0164 G1 X-29.348 Y.316 E.24575 G1 X-29.348 Y-.217 E.0164 G1 X-35 Y5.435 E.24575 G1 X-35 Y4.901 E.0164 G1 X-29.348 Y-.751 E.24575 G1 X-29.348 Y-1.285 E.0164 G1 X-35.17 Y4.537 E.25312 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-33.756 Y3.123 ;WIPE_END G1 X-27.248 Y7.111 Z3.2 F30000 G1 X-16.222 Y13.868 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.548 Y2.194 E.50755 G1 X-4.548 Y1.661 E.0164 G1 X-16.052 Y13.164 E.50017 G1 X-16.052 Y12.631 E.0164 G1 X-4.548 Y1.127 E.50017 G1 X-4.548 Y.594 E.0164 G1 X-16.052 Y12.097 E.50017 G1 X-16.052 Y11.564 E.0164 G1 X-4.548 Y.06 E.50017 G1 X-4.548 Y-.474 E.0164 G1 X-16.052 Y11.03 E.50017 G1 X-16.052 Y10.497 E.0164 G1 X-4.548 Y-1.007 E.50017 G1 X-4.548 Y-1.541 E.0164 G1 X-16.222 Y10.133 E.50755 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.807 Y8.719 ;WIPE_END G1 X-7.337 Y10.282 Z3.2 F30000 G1 X8.578 Y13.612 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X14.383 Y7.807 E.25236 G1 X14.383 Y7.274 E.0164 G1 X8.748 Y12.908 E.24499 G1 X8.748 Y12.375 E.0164 G1 X14.383 Y6.74 E.24499 G1 X14.383 Y6.207 E.0164 G1 X8.748 Y11.841 E.24499 G1 X8.748 Y11.308 E.0164 G1 X14.383 Y5.673 E.24499 G1 X14.383 Y5.139 E.0164 G1 X8.748 Y10.774 E.24499 G1 X8.748 Y10.241 E.0164 G1 X14.383 Y4.606 E.24499 G1 X14.383 Y4.534 E.0022 G1 X10.79 Y8.127 E.15622 G1 X10.606 Y7.944 E.00798 G1 X10.489 Y7.966 E.00368 G1 X8.748 Y9.707 E.07569 G1 X8.748 Y9.173 E.0164 G1 X9.867 Y8.054 E.04866 G3 X9.672 Y8.049 I.037 J-5.047 E.00602 G1 X9.414 Y8.042 E.00794 G2 X9.359 Y8.028 I-.035 J.024 E.00187 G1 X8.578 Y8.81 E.03396 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X9.359 Y8.028 G1 X9.414 Y8.042 G1 X9.672 Y8.049 G1 X9.867 Y8.054 G1 X9.595 Y8.327 ;WIPE_END G1 X11.76 Y4.027 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X14.4 Y1.387 E.1148 G1 X14.4 Y.853 E.0164 G1 X11.646 Y3.608 E.11974 G2 X11.372 Y3.348 I-1.222 J1.016 E.01163 G1 X14.4 Y.32 E.13166 G1 X14.4 Y-.214 E.0164 G1 X11.059 Y3.127 E.14525 G2 X10.705 Y2.948 I-2.981 J5.453 E.01221 G1 X14.4 Y-.747 E.16066 G1 X14.4 Y-1.281 E.0164 G1 X10.298 Y2.822 E.17838 G2 X9.828 Y2.758 I-.479 J1.75 E.0146 G1 X14.4 Y-1.814 E.19878 G1 X14.4 Y-2.348 E.0164 G1 X9.26 Y2.793 E.2235 G2 X8.748 Y2.93 I.221 J1.848 E.01634 G1 X8.748 Y2.771 E.00489 G1 X14.4 Y-2.881 E.24575 G1 X14.4 Y-3.415 E.0164 G1 X8.748 Y2.237 E.24575 G1 X8.748 Y1.704 E.0164 G1 X14.4 Y-3.949 E.24575 G1 X14.4 Y-4.482 E.0164 G1 X8.748 Y1.17 E.24575 G1 X8.748 Y.636 E.0164 G1 X14.4 Y-5.016 E.24575 G1 X14.4 Y-5.549 E.0164 G1 X8.578 Y.273 E.25312 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.548 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X18.952 Y-9.034 E.10451 G1 X18.952 Y-9.567 E.0164 G1 X16.184 Y-6.8 E.12033 G1 X15.651 Y-6.8 E.0164 G1 X18.952 Y-10.101 E.14353 G1 X18.952 Y-10.635 E.0164 G1 X15.117 Y-6.8 E.16673 G1 X14.603 Y-6.8 E.01579 G1 X14.4 Y-6.597 E.00884 G1 X14.4 Y-6.083 E.01579 G1 X8.748 Y-.431 E.24575 G1 X8.748 Y-.964 E.0164 G1 X18.952 Y-11.168 E.44365 G1 X18.952 Y-11.702 E.0164 G1 X8.748 Y-1.498 E.44365 G1 X8.748 Y-2.031 E.0164 G1 X18.952 Y-12.235 E.44365 G1 X18.952 Y-12.769 E.0164 G1 X8.431 Y-2.248 E.45742 G1 X7.898 Y-2.248 E.0164 G1 X18.952 Y-13.302 E.48062 G1 X18.952 Y-13.836 E.0164 G1 X7.364 Y-2.248 E.50382 G1 X6.831 Y-2.248 E.0164 G1 X18.952 Y-14.369 E.52702 G1 X18.952 Y-14.903 E.0164 G1 X6.297 Y-2.248 E.55022 G1 X5.763 Y-2.248 E.0164 G1 X18.952 Y-15.437 E.57342 G1 X18.952 Y-15.97 E.0164 G1 X5.23 Y-2.248 E.59662 G1 X4.696 Y-2.248 E.0164 G1 X18.952 Y-16.504 E.61981 G1 X18.952 Y-17.037 E.0164 G1 X4.163 Y-2.248 E.64301 G1 X3.629 Y-2.248 E.0164 G1 X18.952 Y-17.571 E.66621 G1 X18.952 Y-18.104 E.0164 G1 X3.096 Y-2.248 E.68941 G1 X2.562 Y-2.248 E.0164 G1 X18.952 Y-18.638 E.71261 G1 X18.952 Y-19.172 E.0164 G1 X2.028 Y-2.248 E.73581 G1 X1.495 Y-2.248 E.0164 G1 X18.952 Y-19.705 E.75901 G1 X18.952 Y-20.239 E.0164 G1 X.961 Y-2.248 E.7822 G1 X.428 Y-2.248 E.0164 G1 X18.952 Y-20.772 E.8054 G1 X18.952 Y-21.306 E.0164 G1 X-.106 Y-2.248 E.8286 G1 X-.639 Y-2.248 E.0164 G1 X18.952 Y-21.839 E.8518 G1 X18.952 Y-22.373 E.0164 G1 X-1.173 Y-2.248 E.875 G1 X-1.706 Y-2.248 E.0164 G1 X18.952 Y-22.906 E.8982 G1 X18.952 Y-23.44 E.0164 G1 X-2.24 Y-2.248 E.9214 G1 X-2.774 Y-2.248 E.0164 G1 X18.952 Y-23.974 E.94459 G1 X18.952 Y-24.507 E.0164 G1 X-3.307 Y-2.248 E.96779 G1 X-3.841 Y-2.248 E.0164 G1 X18.952 Y-25.041 E.99099 G1 X18.952 Y-25.574 E.0164 G1 X-16.052 Y9.43 E1.52192 G1 X-16.052 Y8.896 E.0164 G1 X18.952 Y-26.108 E1.52192 G1 X18.952 Y-26.641 E.0164 G1 X-16.052 Y8.362 E1.52192 G1 X-16.052 Y7.829 E.0164 G1 X18.952 Y-27.175 E1.52192 G1 X18.952 Y-27.709 E.0164 G1 X-16.052 Y7.295 E1.52192 G1 X-16.052 Y6.762 E.0164 G1 X18.952 Y-28.242 E1.52192 G1 X18.952 Y-28.776 E.0164 G1 X-16.052 Y6.228 E1.52192 G1 X-16.052 Y5.695 E.0164 G1 X18.952 Y-29.309 E1.52192 G1 X18.952 Y-29.843 E.0164 G1 X-16.052 Y5.161 E1.52192 G1 X-16.052 Y4.627 E.0164 G1 X18.952 Y-30.376 E1.52192 G1 X18.952 Y-30.91 E.0164 G1 X-16.052 Y4.094 E1.52192 G1 X-16.052 Y3.56 E.0164 G1 X18.952 Y-31.443 E1.52192 G1 X18.952 Y-31.977 E.0164 G1 X-16.052 Y3.027 E1.52192 G1 X-16.052 Y2.493 E.0164 G1 X18.952 Y-32.511 E1.52192 G1 X18.952 Y-33.044 E.0164 G1 X-16.052 Y1.96 E1.52192 G1 X-16.052 Y1.426 E.0164 G1 X18.952 Y-33.578 E1.52192 G1 X18.952 Y-34.111 E.0164 G1 X-16.052 Y.893 E1.52192 G1 X-16.052 Y.359 E.0164 G1 X18.952 Y-34.645 E1.52192 G1 X18.952 Y-35.178 E.0164 G1 X-16.052 Y-.175 E1.52192 G1 X-16.052 Y-.708 E.0164 G1 X18.952 Y-35.712 E1.52192 G1 X18.952 Y-36.246 E.0164 G1 X-16.052 Y-1.242 E1.52192 G1 X-16.052 Y-1.775 E.0164 G1 X18.952 Y-36.779 E1.52192 G1 X18.952 Y-37.313 E.0164 G1 X-16.113 Y-2.248 E1.52456 G1 X-16.646 Y-2.248 E.0164 G1 X18.952 Y-37.846 E1.54776 G1 X18.952 Y-38.38 E.0164 G1 X-17.18 Y-2.248 E1.57096 G1 X-17.713 Y-2.248 E.0164 G1 X18.952 Y-38.913 E1.59415 G1 X18.952 Y-39.447 E.0164 G1 X-18.247 Y-2.248 E1.61735 G1 X-18.78 Y-2.248 E.0164 G1 X18.952 Y-39.98 E1.64055 G1 X18.952 Y-40.514 E.0164 G1 X-19.314 Y-2.248 E1.66375 G1 X-19.848 Y-2.248 E.0164 G1 X18.952 Y-41.048 E1.68695 G1 X18.952 Y-41.581 E.0164 G1 X-20.381 Y-2.248 E1.71015 G1 X-20.915 Y-2.248 E.0164 G1 X18.952 Y-42.115 E1.73335 G1 X18.952 Y-42.648 E.0164 M73 P48 R42 G1 X-21.448 Y-2.248 E1.75654 G1 X-21.982 Y-2.248 E.0164 G1 X18.952 Y-43.182 E1.77974 G1 X18.952 Y-43.715 E.0164 G1 X-22.515 Y-2.248 E1.80294 G1 X-23.049 Y-2.248 E.0164 G1 X18.952 Y-44.249 E1.82614 G1 X18.952 Y-44.783 E.0164 G1 X-23.583 Y-2.248 E1.84934 G1 X-24.116 Y-2.248 E.0164 G1 X18.952 Y-45.316 E1.87254 G1 X18.952 Y-45.85 E.0164 G1 X-24.65 Y-2.248 E1.89574 G1 X-25.183 Y-2.248 E.0164 G1 X18.952 Y-46.383 E1.91893 G1 X18.952 Y-46.917 E.0164 G1 X-25.717 Y-2.248 E1.94213 G1 X-26.25 Y-2.248 E.0164 G1 X18.952 Y-47.45 E1.96533 G1 X18.952 Y-47.984 E.0164 G1 X-26.784 Y-2.248 E1.98853 G1 X-27.317 Y-2.248 E.0164 G1 X18.952 Y-48.517 E2.01173 G1 X18.952 Y-49.051 E.0164 G1 X-27.851 Y-2.248 E2.03493 G1 X-28.385 Y-2.248 E.0164 G1 X18.952 Y-49.585 E2.05813 G1 X18.952 Y-50.118 E.0164 G1 X-28.918 Y-2.248 E2.08132 G1 X-29.348 Y-2.248 E.01322 G1 X-29.348 Y-1.818 E.01322 G1 X-35 Y3.834 E.24575 G1 X-35 Y3.3 E.0164 G1 X18.952 Y-50.652 E2.34576 G1 X18.952 Y-51.185 E.0164 G1 X-35.17 Y2.937 E2.35314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-33.756 Y1.522 ;WIPE_END G1 X-26.434 Y3.678 Z3.2 F30000 G1 X21.48 Y17.784 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X27.952 Y11.312 E.28139 G1 X27.952 Y10.779 E.0164 G1 X21.65 Y17.081 E.27401 G1 X21.65 Y16.547 E.0164 G1 X27.952 Y10.245 E.27401 G1 X27.952 Y9.711 E.0164 G1 X21.65 Y16.014 E.27401 G1 X21.65 Y15.48 E.0164 G1 X27.952 Y9.178 E.27401 G1 X27.952 Y8.644 E.0164 G1 X21.65 Y14.946 E.27401 G1 X21.65 Y14.413 E.0164 G1 X27.952 Y8.111 E.27401 G1 X27.952 Y7.577 E.0164 G1 X21.65 Y13.879 E.27401 G1 X21.65 Y13.346 E.0164 G1 X27.952 Y7.044 E.27401 G1 X27.952 Y6.51 E.0164 G1 X21.65 Y12.812 E.27401 G1 X21.65 Y12.279 E.0164 G1 X27.952 Y5.977 E.27401 G1 X27.952 Y5.443 E.0164 G1 X21.65 Y11.745 E.27401 G1 X21.65 Y11.212 E.0164 G1 X27.952 Y4.909 E.27401 G1 X27.952 Y4.376 E.0164 G1 X21.65 Y10.678 E.27401 G1 X21.65 Y10.144 E.0164 G1 X27.952 Y3.842 E.27401 G1 X27.952 Y3.309 E.0164 G1 X21.65 Y9.611 E.27401 G1 X21.65 Y9.077 E.0164 G1 X27.952 Y2.775 E.27401 G1 X27.952 Y2.705 E.00216 G3 X27.098 Y3.095 I-1.669 J-2.522 E.02898 G1 X21.65 Y8.544 E.23689 G1 X21.65 Y8.01 E.0164 G1 X26.447 Y3.212 E.2086 G3 X25.916 Y3.211 I-.257 J-2.7 E.01637 G1 X21.65 Y7.477 E.18548 G1 X21.65 Y6.943 E.0164 G1 X25.458 Y3.134 E.16559 G3 X25.05 Y3.009 I.432 J-2.135 E.01315 G1 X21.65 Y6.409 E.14784 G1 X21.65 Y5.876 E.0164 G1 X24.809 Y2.717 E.13734 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X23.394 Y4.131 ;WIPE_END G1 X24.395 Y-3.435 Z3.2 F30000 G1 X31.122 Y-54.284 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X29.085 Y-52.248 E.08854 G1 X28.552 Y-52.248 E.0164 G1 X30.952 Y-54.648 E.10436 G1 X30.952 Y-55.182 E.0164 G1 X28.018 Y-52.248 E.12755 G1 X27.485 Y-52.248 E.0164 G1 X30.952 Y-55.715 E.15075 G1 X30.952 Y-56.249 E.0164 G1 X26.951 Y-52.248 E.17395 G1 X26.417 Y-52.248 E.0164 G1 X30.952 Y-56.783 E.19715 G1 X30.952 Y-57.316 E.0164 G1 X25.884 Y-52.248 E.22035 G1 X25.35 Y-52.248 E.0164 G1 X30.952 Y-57.85 E.24355 G1 X30.952 Y-58.383 E.0164 G1 X24.817 Y-52.248 E.26675 G1 X24.283 Y-52.248 E.0164 M73 P48 R41 G1 X30.952 Y-58.917 E.28994 G1 X30.952 Y-59.45 E.0164 G1 X23.75 Y-52.248 E.31314 G1 X23.216 Y-52.248 E.0164 G1 X30.72 Y-59.752 E.32625 G1 X30.186 Y-59.752 E.0164 G1 X22.683 Y-52.248 E.32625 G1 X22.149 Y-52.248 E.0164 G1 X29.653 Y-59.752 E.32625 G1 X29.119 Y-59.752 E.0164 G1 X21.615 Y-52.248 E.32625 G1 X21.082 Y-52.248 E.0164 G1 X28.586 Y-59.752 E.32625 G1 X28.052 Y-59.752 E.0164 G1 X20.548 Y-52.248 E.32625 G1 X20.015 Y-52.248 E.0164 G1 X27.519 Y-59.752 E.32625 G1 X26.985 Y-59.752 E.0164 G1 X19.481 Y-52.248 E.32625 G1 X18.952 Y-52.248 E.01627 G1 X18.952 Y-51.719 E.01627 G1 X-35 Y2.233 E2.34576 G1 X-35 Y1.7 E.0164 G1 X26.451 Y-59.752 E2.67183 G1 X25.918 Y-59.752 E.0164 G1 X-35 Y1.166 E2.64863 G1 X-35 Y.633 E.0164 G1 X25.384 Y-59.752 E2.62543 G1 X24.851 Y-59.752 E.0164 G1 X-35 Y.099 E2.60224 G1 X-35 Y-.435 E.0164 G1 X24.317 Y-59.752 E2.57904 G1 X23.784 Y-59.752 E.0164 G1 X-35 Y-.968 E2.55584 G1 X-35 Y-1.502 E.0164 G1 X-17.814 Y-18.688 E.74723 G3 X-18.392 Y-18.643 I-.501 J-2.732 E.01786 G1 X-35 Y-2.035 E.7221 G1 X-35 Y-2.569 E.0164 G1 X-18.865 Y-18.704 E.70152 G3 X-19.274 Y-18.828 I.229 J-1.485 E.01319 G1 X-35 Y-3.102 E.68374 G1 X-35 Y-3.636 E.0164 G1 X-19.636 Y-19 E.668 G3 X-19.951 Y-19.218 I.672 J-1.306 E.01182 G1 X-35 Y-4.169 E.6543 G1 X-35 Y-4.703 E.0164 G1 X-20.228 Y-19.475 E.64227 G3 X-20.467 Y-19.77 I1.001 J-1.054 E.0117 G1 X-35 Y-5.237 E.63189 G1 X-35 Y-5.77 E.0164 G1 X-20.666 Y-20.105 E.62325 G3 X-20.82 Y-20.484 I1.362 J-.777 E.01262 G1 X-35 Y-6.304 E.61652 G1 X-35 Y-6.597 E.009 G1 X-35.121 Y-6.717 E.00523 G1 X-20.923 Y-20.915 E.61731 G3 X-20.942 Y-21.43 I3.329 J-.379 E.01585 G1 X-35.741 Y-6.63 E.64346 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.928 Y-20.574 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X23.25 Y-59.752 E1.70342 G1 X22.716 Y-59.752 E.0164 G1 X-15.655 Y-21.38 E1.66835 G2 X-15.716 Y-21.853 I-1.828 J-.008 E.01471 G1 X22.183 Y-59.752 E1.64777 G1 X21.649 Y-59.752 E.0164 G1 X-15.838 Y-22.264 E1.6299 G2 X-16.012 Y-22.624 I-5.404 J2.384 E.01229 G1 X14.116 Y-52.752 E1.3099 G1 X13.582 Y-52.752 E.0164 G1 X-16.23 Y-22.94 E1.2962 G2 X-16.487 Y-23.216 I-1.179 J.837 E.01164 G1 X13.049 Y-52.752 E1.28417 G1 X12.515 Y-52.752 E.0164 G1 X-16.782 Y-23.455 E1.27379 G2 X-17.117 Y-23.654 I-.922 J1.172 E.012 G1 X11.981 Y-52.752 E1.26515 G1 X11.448 Y-52.752 E.0164 G1 X-17.496 Y-23.808 E1.25842 G2 X-17.927 Y-23.911 I-.604 J1.586 E.01366 G1 X10.914 Y-52.752 E1.25397 G1 X10.381 Y-52.752 E.0164 G1 X-18.627 Y-23.744 E1.26122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.275 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.824 Y-22.08 E.67175 G3 X-19.092 Y-23.813 I2.492 J.759 E.07842 G1 X9.847 Y-52.752 E1.25824 G1 X9.314 Y-52.752 E.0164 G1 X-36.638 Y-6.8 E1.99794 G1 X-37.172 Y-6.8 E.0164 G1 X8.78 Y-52.752 E1.99794 G1 X8.247 Y-52.752 E.0164 G1 X-37.706 Y-6.8 E1.99794 G1 X-38.239 Y-6.8 E.0164 G1 X7.713 Y-52.752 E1.99794 G1 X7.179 Y-52.752 E.0164 G1 X-38.773 Y-6.8 E1.99794 G1 X-39.306 Y-6.8 E.0164 G1 X6.646 Y-52.752 E1.99794 G1 X6.452 Y-52.752 E.00596 G1 X6.452 Y-53.091 E.01044 G1 X-39.552 Y-7.088 E2.00018 G1 X-39.552 Y-7.621 E.0164 G1 X6.452 Y-53.625 E2.00018 G1 X6.452 Y-54.159 E.0164 G1 X-39.552 Y-8.155 E2.00018 G1 X-39.552 Y-8.688 E.0164 G1 X6.452 Y-54.692 E2.00018 G1 X6.452 Y-55.226 E.0164 G1 X-39.552 Y-9.222 E2.00018 G1 X-39.552 Y-9.756 E.0164 G1 X6.452 Y-55.759 E2.00018 G1 X6.452 Y-56.293 E.0164 G1 X-39.552 Y-10.289 E2.00018 G1 X-39.552 Y-10.823 E.0164 G1 X6.452 Y-56.826 E2.00018 G1 X6.452 Y-57.36 E.0164 G1 X-39.552 Y-11.356 E2.00018 G1 X-39.552 Y-11.89 E.0164 G1 X6.452 Y-57.894 E2.00018 G1 X6.452 Y-58.427 E.0164 G1 X-39.552 Y-12.423 E2.00018 G1 X-39.552 Y-12.957 E.0164 G1 X6.452 Y-58.961 E2.00018 G1 X6.452 Y-59.494 E.0164 G1 X-39.552 Y-13.49 E2.00018 G1 X-39.552 Y-14.024 E.0164 G1 X6.176 Y-59.752 E1.98818 G1 X5.642 Y-59.752 E.0164 G1 X-15.866 Y-38.244 E.93515 G3 X-17.256 Y-36.854 I-2.412 J-1.022 E.06195 G1 X-39.552 Y-14.558 E.96941 G1 X-39.552 Y-15.091 E.0164 G1 X-17.985 Y-36.658 E.93769 G3 X-18.525 Y-36.652 I-.292 J-2.045 E.01663 G1 X-39.552 Y-15.625 E.91424 G1 X-39.552 Y-16.158 E.0164 G1 X-18.983 Y-36.727 E.8943 G3 X-19.375 Y-36.869 I1.631 J-5.116 E.01281 G1 X-39.552 Y-16.692 E.87727 G1 X-39.552 Y-17.225 E.0164 G1 X-19.721 Y-37.056 E.86222 G3 X-20.027 Y-37.284 I.713 J-1.275 E.01176 G1 X-39.552 Y-17.759 E.84893 G1 X-39.552 Y-18.293 E.0164 G1 X-20.294 Y-37.55 E.8373 G3 X-20.523 Y-37.855 I1.041 J-1.023 E.01175 G1 X-39.552 Y-18.826 E.82733 G1 X-39.552 Y-19.36 E.0164 G1 X-20.712 Y-38.199 E.81912 G3 X-20.856 Y-38.589 I1.409 J-.741 E.01281 G1 X-39.552 Y-19.893 E.81287 G1 X-39.552 Y-20.427 E.0164 G1 X-20.935 Y-39.044 E.80945 G3 X-20.932 Y-39.581 I2.04 J-.256 E.01655 G1 X-39.722 Y-20.791 E.81696 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.881 Y-38.762 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X5.109 Y-59.752 E.91259 G1 X4.575 Y-59.752 E.0164 G1 X-15.664 Y-39.513 E.87997 G2 X-15.739 Y-39.971 I-1.779 J.056 E.01433 G1 X4.042 Y-59.752 E.86004 G1 X3.508 Y-59.752 E.0164 G1 X-15.882 Y-40.361 E.84308 G2 X-16.068 Y-40.709 I-1.303 J.472 E.01216 G1 X2.975 Y-59.752 E.82796 G1 X2.441 Y-59.752 E.0164 G1 X-16.296 Y-41.015 E.81466 G2 X-16.562 Y-41.282 I-1.149 J.877 E.01163 G1 X1.907 Y-59.752 E.80304 G1 X1.374 Y-59.752 E.0164 G1 X-16.866 Y-41.511 E.79307 G2 X-17.211 Y-41.7 I-.89 J1.215 E.01212 G1 X.84 Y-59.752 E.78485 G1 X.307 Y-59.752 E.0164 G1 X-17.601 Y-41.844 E.7786 G2 X-18.056 Y-41.923 I-.905 J3.876 E.0142 G1 X-.227 Y-59.752 E.77518 G1 X-.76 Y-59.752 E.0164 G1 X-18.801 Y-41.712 E.78437 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.124 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.306 Y-41.74 E.79051 G2 X-20.747 Y-40.299 I.993 J2.435 E.06435 G1 X-39.552 Y-21.494 E.81761 G1 X-39.552 Y-22.027 E.0164 G1 X-1.827 Y-59.752 E1.64021 G1 X-2.361 Y-59.752 E.0164 G1 X-39.552 Y-22.561 E1.61701 G1 X-39.552 Y-23.095 E.0164 G1 X-2.895 Y-59.752 E1.59381 G1 X-3.428 Y-59.752 E.0164 G1 X-39.552 Y-23.628 E1.57061 G1 X-39.552 Y-24.162 E.0164 G1 X-3.962 Y-59.752 E1.54741 G1 X-4.495 Y-59.752 E.0164 G1 X-39.552 Y-24.695 E1.52421 G1 X-39.552 Y-25.229 E.0164 G1 X-5.029 Y-59.752 E1.50101 G1 X-5.562 Y-59.752 E.0164 G1 X-39.552 Y-25.762 E1.47782 G1 X-39.552 Y-26.296 E.0164 G1 X-6.096 Y-59.752 E1.45462 G1 X-6.63 Y-59.752 E.0164 G1 X-39.552 Y-26.83 E1.43142 G1 X-39.552 Y-27.363 E.0164 G1 X-7.163 Y-59.752 E1.40822 G1 X-7.697 Y-59.752 E.0164 G1 X-39.552 Y-27.897 E1.38502 G1 X-39.552 Y-28.43 E.0164 G1 X-8.23 Y-59.752 E1.36182 G1 X-8.764 Y-59.752 E.0164 G1 X-39.552 Y-28.964 E1.33862 G1 X-39.552 Y-29.497 E.0164 G1 X-9.297 Y-59.752 E1.31543 G1 X-9.831 Y-59.752 E.0164 G1 X-39.552 Y-30.031 E1.29223 G1 X-39.552 Y-30.564 E.0164 G1 X-10.364 Y-59.752 E1.26903 G1 X-10.898 Y-59.752 E.0164 G1 X-39.552 Y-31.098 E1.24583 G1 X-39.552 Y-31.632 E.0164 G1 X-11.432 Y-59.752 E1.22263 G1 X-11.965 Y-59.752 E.0164 G1 X-39.552 Y-32.165 E1.19943 G1 X-39.552 Y-32.699 E.0164 G1 X-12.499 Y-59.752 E1.17623 G1 X-13.032 Y-59.752 E.0164 G1 X-39.552 Y-33.232 E1.15304 G1 X-39.552 Y-33.766 E.0164 G1 X-13.566 Y-59.752 E1.12984 G1 X-14.099 Y-59.752 E.0164 G1 X-39.552 Y-34.299 E1.10664 G1 X-39.552 Y-34.833 E.0164 G1 X-14.633 Y-59.752 E1.08344 G1 X-15.167 Y-59.752 E.0164 G1 X-39.552 Y-35.367 E1.06024 G1 X-39.552 Y-35.9 E.0164 G1 X-15.7 Y-59.752 E1.03704 G1 X-16.234 Y-59.752 E.0164 G1 X-39.552 Y-36.434 E1.01384 G1 X-39.552 Y-36.967 E.0164 G1 X-16.767 Y-59.752 E.99065 G1 X-17.301 Y-59.752 E.0164 G1 X-39.552 Y-37.501 E.96745 G1 X-39.552 Y-38.034 E.0164 G1 X-17.834 Y-59.752 E.94425 G1 X-18.368 Y-59.752 E.0164 G1 X-39.552 Y-38.568 E.92105 G1 X-39.552 Y-39.101 E.0164 G1 X-18.901 Y-59.752 E.89785 G1 X-19.435 Y-59.752 E.0164 G1 X-39.552 Y-39.635 E.87465 G1 X-39.552 Y-40.169 E.0164 G1 X-19.969 Y-59.752 E.85145 G1 X-20.502 Y-59.752 E.0164 G1 X-27.052 Y-53.202 E.28477 G1 X-27.052 Y-52.752 E.01384 G1 X-27.502 Y-52.752 E.01384 G1 X-39.552 Y-40.702 E.5239 G1 X-39.552 Y-41.236 E.0164 G1 X-28.036 Y-52.752 E.50071 G1 X-28.569 Y-52.752 E.0164 G1 X-39.552 Y-41.769 E.47751 G1 X-39.552 Y-42.303 E.0164 G1 X-29.103 Y-52.752 E.45431 G1 X-29.636 Y-52.752 E.0164 G1 X-39.552 Y-42.836 E.43111 G1 X-39.552 Y-43.37 E.0164 G1 X-30.17 Y-52.752 E.40791 G1 X-30.704 Y-52.752 E.0164 G1 X-39.552 Y-43.904 E.38471 G1 X-39.552 Y-44.437 E.0164 G1 X-31.237 Y-52.752 E.36151 G1 X-31.771 Y-52.752 E.0164 G1 X-39.552 Y-44.971 E.33832 G1 X-39.552 Y-45.504 E.0164 G1 X-32.304 Y-52.752 E.31512 G1 X-32.838 Y-52.752 E.0164 G1 X-39.552 Y-46.038 E.29192 G1 X-39.552 Y-46.571 E.0164 G1 X-33.371 Y-52.752 E.26872 G1 X-33.905 Y-52.752 E.0164 G1 X-39.552 Y-47.105 E.24552 G1 X-39.552 Y-47.638 E.0164 G1 X-34.438 Y-52.752 E.22232 G1 X-34.972 Y-52.752 E.0164 G1 X-39.552 Y-48.172 E.19912 G1 X-39.552 Y-48.706 E.0164 G1 X-35.506 Y-52.752 E.17593 G1 X-35.548 Y-52.752 E.00131 G1 X-35.548 Y-53.243 E.0151 G1 X-39.552 Y-49.239 E.17408 G1 X-39.552 Y-49.773 E.0164 G1 X-35.548 Y-53.777 E.17408 G1 X-35.548 Y-54.31 E.0164 G1 X-39.552 Y-50.306 E.17408 G1 X-39.552 Y-50.84 E.0164 G1 X-35.548 Y-54.844 E.17408 G1 X-35.548 Y-55.377 E.0164 G1 X-39.552 Y-51.373 E.17408 G1 X-39.552 Y-51.907 E.0164 G1 X-35.548 Y-55.911 E.17408 G1 X-35.548 Y-56.444 E.0164 G1 X-39.744 Y-52.248 E.18245 G1 X-40.278 Y-52.248 E.0164 G1 X-35.548 Y-56.978 E.20565 G1 X-35.548 Y-57.511 E.0164 G1 X-40.811 Y-52.248 E.22884 G1 X-41.345 Y-52.248 E.0164 G1 X-35.548 Y-58.045 E.25204 G1 X-35.548 Y-58.579 E.0164 G1 X-41.879 Y-52.248 E.27524 G1 X-42.412 Y-52.248 E.0164 G1 X-35.548 Y-59.112 E.29844 G1 X-35.548 Y-59.646 E.0164 G1 X-42.946 Y-52.248 E.32164 G1 X-43.479 Y-52.248 E.0164 G1 X-35.976 Y-59.752 E.32625 G1 X-36.509 Y-59.752 E.0164 G1 X-44.013 Y-52.248 E.32625 G1 X-44.546 Y-52.248 E.0164 G1 X-37.043 Y-59.752 E.32625 G1 X-37.576 Y-59.752 E.0164 G1 X-45.08 Y-52.248 E.32625 G1 X-45.614 Y-52.248 E.0164 G1 X-38.11 Y-59.752 E.32625 G1 X-38.643 Y-59.752 E.0164 G1 X-46.147 Y-52.248 E.32625 G1 X-46.681 Y-52.248 E.0164 G1 X-39.177 Y-59.752 E.32625 G1 X-39.71 Y-59.752 E.0164 G1 X-47.214 Y-52.248 E.32625 G1 X-47.748 Y-52.248 E.0164 G1 X-40.244 Y-59.752 E.32625 G1 X-40.778 Y-59.752 E.0164 G1 X-48.281 Y-52.248 E.32625 G1 X-48.815 Y-52.248 E.0164 G1 X-41.311 Y-59.752 E.32625 G1 X-41.845 Y-59.752 E.0164 G1 X-49.348 Y-52.248 E.32625 G1 X-49.882 Y-52.248 E.0164 G1 X-42.378 Y-59.752 E.32625 G1 X-42.912 Y-59.752 E.0164 G1 X-50.416 Y-52.248 E.32625 G1 X-50.949 Y-52.248 E.0164 G1 X-43.445 Y-59.752 E.32625 G1 X-43.979 Y-59.752 E.0164 G1 X-51.483 Y-52.248 E.32625 G1 X-51.552 Y-52.248 E.00213 G1 X-51.552 Y-52.713 E.01428 G1 X-44.513 Y-59.752 E.30606 G1 X-45.046 Y-59.752 E.0164 G1 X-51.552 Y-53.246 E.28286 G1 X-51.552 Y-53.78 E.0164 G1 X-45.58 Y-59.752 E.25967 G1 X-46.113 Y-59.752 E.0164 G1 X-51.552 Y-54.313 E.23647 G1 X-51.552 Y-54.847 E.0164 G1 X-46.647 Y-59.752 E.21327 G1 X-47.18 Y-59.752 E.0164 G1 X-51.552 Y-55.38 E.19007 G1 X-51.552 Y-55.914 E.0164 G1 X-47.714 Y-59.752 E.16687 G1 X-48.247 Y-59.752 E.0164 G1 X-51.552 Y-56.447 E.14367 G1 X-51.552 Y-56.981 E.0164 G1 X-48.781 Y-59.752 E.12047 G1 X-49.315 Y-59.752 E.0164 G1 X-51.552 Y-57.515 E.09728 G1 X-51.552 Y-58.048 E.0164 G1 X-49.848 Y-59.752 E.07408 G1 X-50.382 Y-59.752 E.0164 G1 X-51.552 Y-58.582 E.05088 G1 X-51.552 Y-59.115 E.0164 G1 X-50.746 Y-59.922 E.03506 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.552 Y-59.115 G1 X-51.552 Y-58.582 G1 X-51.321 Y-58.812 ;WIPE_END G1 X-43.863 Y-57.189 Z3.2 F30000 G1 X-27.222 Y-53.566 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-21.036 Y-59.752 E.26895 G1 X-21.569 Y-59.752 E.0164 G1 X-27.052 Y-54.269 E.23838 G1 X-27.052 Y-54.803 E.0164 G1 X-22.103 Y-59.752 E.21518 G1 X-22.636 Y-59.752 E.0164 G1 X-27.052 Y-55.336 E.19198 G1 X-27.052 Y-55.87 E.0164 G1 X-23.17 Y-59.752 E.16878 G1 X-23.704 Y-59.752 E.0164 G1 X-27.052 Y-56.404 E.14558 G1 X-27.052 Y-56.937 E.0164 G1 X-24.237 Y-59.752 E.12238 G1 X-24.771 Y-59.752 E.0164 G1 X-27.052 Y-57.471 E.09918 G1 X-27.052 Y-58.004 E.0164 G1 X-25.304 Y-59.752 E.07599 G1 X-25.838 Y-59.752 E.0164 G1 X-27.052 Y-58.538 E.05279 G1 X-27.052 Y-59.071 E.0164 G1 X-26.202 Y-59.922 E.03697 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-27.052 Y-59.071 G1 X-27.052 Y-58.538 G1 X-26.865 Y-58.725 ;WIPE_END G1 X-19.294 Y-57.759 Z3.2 F30000 G1 X14.778 Y-53.415 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.116 Y-59.752 E.27554 G1 X20.582 Y-59.752 E.0164 G1 X14.948 Y-54.118 E.24496 G1 X14.948 Y-54.651 E.0164 G1 X20.049 Y-59.752 E.22176 G1 X19.515 Y-59.752 E.0164 G1 X14.948 Y-55.185 E.19856 G1 X14.948 Y-55.719 E.0164 G1 X18.981 Y-59.752 E.17537 G1 X18.448 Y-59.752 E.0164 G1 X14.948 Y-56.252 E.15217 G1 X14.948 Y-56.786 E.0164 G1 X17.914 Y-59.752 E.12897 G1 X17.381 Y-59.752 E.0164 G1 X14.948 Y-57.319 E.10577 G1 X14.948 Y-57.853 E.0164 G1 X16.847 Y-59.752 E.08257 G1 X16.314 Y-59.752 E.0164 G1 X14.948 Y-58.386 E.05937 G1 X14.948 Y-58.92 E.0164 G1 X15.78 Y-59.752 E.03617 G1 X15.247 Y-59.752 E.0164 G1 X14.778 Y-59.284 E.02035 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.549 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X6.851 Y-60 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.851 Y-60 ;WIPE_END G1 X16.041 Y-57.437 Z3.2 F30000 G1 X29.923 Y-52.487 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.505729 G1 F15000 G1 X30.713 Y-52.487 E.0298 G1 X30.713 Y-53.277 E.0298 G1 X29.951 Y-52.515 E.04063 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.713 Y-53.277 G1 X30.713 Y-52.487 G1 X30.58 Y-52.487 ;WIPE_END G1 X28.441 Y-45.161 Z3.2 F30000 G1 X17.238 Y-6.8 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X18.756 Y-6.8 E.04665 G1 X18.756 Y-8.318 E.04665 G1 X17.266 Y-6.828 E.06474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.343 Y-7.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.555104 G1 F14942.015 G2 X18.355 Y-7.21 I-.031 J.05 E.01114 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.904 Y-4.737 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X19.276 Y-4.737 E.05401 G3 X20.167 Y-3.743 I-148.64 J134.205 E.04428 G3 X20.116 Y-2.105 I-1.554 J.771 E.05661 G2 X19.229 Y-1.123 I18.379 J17.481 E.04392 G2 X19.28 Y.515 I1.554 J.771 E.05661 G3 X20.167 Y1.498 I-18.377 J17.48 E.04392 G3 X20.116 Y3.136 I-1.554 J.771 E.05661 G2 X19.229 Y4.119 I18.377 J17.48 E.04392 G2 X19.28 Y5.757 I1.554 J.771 E.05661 G3 X20.167 Y6.739 I-18.378 J17.481 E.04392 G3 X20.116 Y8.377 I-1.554 J.771 E.05661 G2 X19.229 Y9.36 I18.377 J17.48 E.04392 G2 X19.28 Y10.998 I1.554 J.771 E.05661 G3 X20.167 Y11.981 I-18.378 J17.481 E.04392 G3 X20.116 Y13.619 I-1.554 J.771 E.05661 G2 X19.229 Y14.601 I18.377 J17.48 E.04392 G2 X19.28 Y16.239 I1.554 J.771 E.05661 G3 X20.325 Y17.55 I-2.916 J3.398 E.05593 G1 X20.363 Y18.205 E.02177 G1 X20.286 Y18.408 E.00719 G1 X17.73 Y18.408 E.08478 G1 X17.742 Y18.205 E.00674 G1 X17.495 Y17.55 E.02322 G3 X16.608 Y16.567 I18.379 J-17.481 E.04392 G3 X16.659 Y14.929 I1.554 J-.771 E.05661 G2 X17.546 Y13.946 I-18.378 J-17.481 E.04392 G2 X17.495 Y12.308 I-1.554 J-.771 E.05661 G3 X16.608 Y11.326 I18.377 J-17.48 E.04392 G3 X16.659 Y9.688 I1.554 J-.771 E.05661 G2 X17.546 Y8.705 I-18.378 J-17.481 E.04392 G2 X17.495 Y7.067 I-1.554 J-.771 E.05661 G3 X16.608 Y6.084 I18.377 J-17.48 E.04392 G3 X16.659 Y4.446 I1.554 J-.771 E.05661 G2 X17.546 Y3.464 I-18.379 J-17.481 E.04392 G2 X17.495 Y1.826 I-1.554 J-.771 E.05661 G3 X16.608 Y.843 I18.377 J-17.48 E.04392 G3 X16.659 Y-.795 I1.554 J-.771 E.05661 G2 X17.546 Y-1.778 I-18.377 J-17.48 E.04392 G2 X17.495 Y-3.416 I-1.554 J-.771 E.05661 G1 X16.893 Y-4.071 E.02951 G3 X17 Y-6.408 I1.056 J-1.123 E.0881 G1 X14.792 Y-6.408 E.07324 G1 X14.792 Y-3.896 E.08332 G1 X14.925 Y-3.743 E.00672 G3 X14.874 Y-2.105 I-1.554 J.771 E.05661 G1 X14.792 Y-2.016 E.00402 G1 X14.792 Y1.345 E.1115 G1 X14.925 Y1.498 E.00672 G3 X14.874 Y3.136 I-1.554 J.771 E.05661 G1 X14.792 Y3.225 E.00402 G1 X14.792 Y6.587 E.1115 G1 X14.925 Y6.739 E.00672 G3 X14.874 Y8.377 I-1.554 J.771 E.05661 G1 X14.792 Y8.467 E.00402 G1 X14.792 Y11.828 E.1115 G1 X14.925 Y11.981 E.00672 G3 X14.874 Y13.619 I-1.554 J.771 E.05661 G1 X14.792 Y13.708 E.00402 G1 X14.792 Y17.069 E.1115 G3 X15.084 Y17.55 I-.733 J.773 E.01886 G1 X15.121 Y18.205 E.02177 G1 X15.045 Y18.408 E.00719 G1 X16.673 Y18.408 E.05401 G1 X26.463 Y17.562 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.40658 G1 F15000 G1 X27.048 Y17.562 E.01734 G1 X27.105 Y17.415 E.00466 ;WIDTH:0.413134 G1 X27.168 Y17.374 E.00226 ;WIDTH:0.443586 G1 X27.231 Y17.333 E.00245 ;WIDTH:0.480624 G1 X27.462 Y17.311 E.00828 ;WIDTH:0.543078 G1 X27.693 Y17.289 E.00946 G1 X27.693 Y16.43 E.03501 G1 X27.263 Y16.86 E.02475 ;WIDTH:0.521367 G1 X27.127 Y16.961 E.00663 ;WIDTH:0.471983 G1 X26.991 Y17.063 E.00595 ;WIDTH:0.410119 G1 X26.854 Y17.164 E.00509 G1 X26.491 Y17.534 E.01549 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y17.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y32.256 E.57795 G1 X26.962 Y37.465 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.601642 G1 F13697.44 G1 X27.021 Y37.388 E.00445 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.368 Y36.965 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.493 G1 F15000 G1 X27.207 Y37.16 E.0093 ;WIDTH:0.54057 G1 X27.046 Y37.356 E.01028 G1 X27.231 Y37.306 E.00777 ;WIDTH:0.481473 G1 X27.732 Y37.328 E.01792 G1 X27.732 Y36.601 E.02597 G1 X27.396 Y36.936 E.01694 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.7 Y37.744 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y52.256 E.57795 G1 X27.39 Y59.19 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.397572 G1 F15000 G2 X27.383 Y58.548 I-4.924 J-.268 E.01856 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.308 Y56.288 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.561178 G1 F14766.896 G1 X26.705 Y56.891 E.03601 G1 X27.011 Y57.29 E.02125 G1 X27.279 Y57.844 E.02598 ;WIDTH:0.537052 G1 F15000 G1 X27.313 Y58.066 E.00902 ;WIDTH:0.488798 G1 X27.347 Y58.287 E.00814 ;WIDTH:0.440545 G1 X27.381 Y58.508 E.00726 G1 X27.356 Y58.286 E.00726 ;WIDTH:0.488798 G1 X27.332 Y58.063 E.00814 ;WIDTH:0.554953 G1 F14946.435 G1 X27.308 Y57.84 E.00935 G1 X27.308 Y56.328 E.06311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.756 Y55.207 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.087 Y56.876 E.07252 G3 X26.676 Y57.596 I-4.966 J4.668 E.02861 G1 X26.846 Y57.959 E.01232 G1 X27.018 Y58.605 E.02053 G3 X26.983 Y59.556 I-3.863 J.334 E.02932 G1 X27.756 Y59.556 E.02375 G1 X27.756 Y55.247 E.1324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X27.756 Y57.247 ;WIPE_END G1 X25.779 Y49.875 Z3.2 F30000 G1 X14.585 Y8.117 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42 G1 F15000 G1 X14.514 Y8.158 E.00251 G1 X14.588 Y8.193 E.00252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.104 Y4.267 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X13.618 Y3.753 E.02233 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.659 Y4.178 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X12.829 Y4.638 E.01507 G1 X12.879 Y5.024 E.01197 G1 X14 Y3.904 E.04871 G1 X14.023 Y2.814 E.03348 G1 X12.688 Y4.15 E.05803 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.215 Y4.089 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X12.442 Y4.64 E.01832 G1 X12.545 Y5.375 E.02281 G1 X12.474 Y5.963 E.01818 G1 X14.267 Y4.17 E.07789 G1 X14.4 Y4.17 E.0041 G1 X14.4 Y1.904 E.06964 G1 X12.243 Y4.061 E.09373 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X13.658 Y2.646 ;WIPE_END G1 X8.902 Y8.01 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X8.838 Y8.047 E.00204 G1 X8.903 Y8.082 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.65 Y1.453 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X21.65 Y5.32 E.1188 G1 X24.203 Y2.766 E.11096 G1 X23.795 Y2.431 E.01623 G1 X23.367 Y1.915 E.0206 G1 X23.048 Y1.326 E.0206 G1 X22.85 Y.685 E.0206 G1 X22.819 Y.417 E.00829 G1 X21.783 Y1.453 E.04504 G1 X21.69 Y1.453 E.00287 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.05 Y1.72 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X22.027 Y2.31 E.01813 G1 X22.027 Y4.409 E.06452 G1 X23.642 Y2.794 E.0702 G3 X22.715 Y1.504 I2.879 J-3.047 E.04912 G1 X22.602 Y1.168 E.01088 G1 X22.078 Y1.692 E.02277 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.46 Y1.946 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.532513 G1 F15000 G1 X22.46 Y3.363 E.05654 G1 X23.035 Y2.788 E.03243 G1 X22.632 Y2.267 E.02631 G1 X22.479 Y1.981 E.01291 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.774 Y-3.02 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.423569 G1 F15000 G1 X27.488 Y-4.734 E.07519 G1 X26.95 Y-4.734 E.0167 G1 X25.042 Y-2.826 E.08371 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.179 Y-.425 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.667 Y1.087 E.06629 G1 X21.667 Y.591 E.01537 G1 X21.65 Y.566 E.00095 G1 X23.374 Y-1.158 E.07563 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y.197 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X26.412 Y-4.734 E.21633 G1 X25.873 Y-4.734 E.0167 G1 X21.65 Y-.511 E.18528 G1 X21.65 Y-1.049 E.0167 G1 X25.335 Y-4.734 E.16166 G1 X24.797 Y-4.734 E.0167 G1 X21.65 Y-1.587 E.13805 G1 X21.65 Y-2.126 E.0167 G1 X24.258 Y-4.734 E.11443 G1 X23.72 Y-4.734 E.0167 G1 X21.65 Y-2.664 E.09082 G1 X21.65 Y-3.202 E.0167 G1 X23.182 Y-4.734 E.06721 G1 X22.644 Y-4.734 E.0167 G1 X21.65 Y-3.741 E.04359 G1 X21.65 Y-4.279 E.0167 G1 X22.275 Y-4.904 E.02742 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.617 Y-3.381 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X26.885 Y-3.35 E.00829 G1 X27.492 Y-3.167 E.01947 G1 X27.756 Y-3.031 E.00913 G1 X27.756 Y-4.519 E.04574 G1 X26.645 Y-3.409 E.04826 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.399 Y-3.642 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42754 G1 F15000 G1 X27.327 Y-3.6 E.00261 G1 X27.403 Y-3.565 E.00262 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.535 Y-1.264 F30000 ;TYPE:Gap infill ;WIDTH:0.39396 G1 F12000 G3 X28.611 Y-.863 I-8.1 J1.76 E.0117 ;WIDTH:0.344555 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.307218 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276406 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.30549 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342225 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385478 G1 X28.591 Y.981 E.00334 ;WIDTH:0.409516 G1 X28.535 Y1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.591 Y.981 ;WIPE_END G1 X23.438 Y-4.65 Z3.2 F30000 G1 X-26.895 Y-59.653 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-26.959 Y-59.616 E.00204 G1 X-26.894 Y-59.581 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.451 Y-60 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-35.149 Y-60 E.19 G1 X-51.404 Y-59.662 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-51.467 Y-59.625 E.00204 G1 X-51.402 Y-59.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.467 Y-59.625 G1 X-51.404 Y-59.662 ;WIPE_END G1 X-49.615 Y-52.242 Z3.2 F30000 G1 X-42.652 Y-23.367 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 M73 P49 R41 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:3 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;3 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z3.4 I-.257 J1.19 P1 F30000 G1 X49.532 Y-1.664 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.576 Y-1.673 E.00151 G1 X50 Y-1.758 E.01433 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.492 Y-1.657 E.00558 G1 X49.617 Y-1.238 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.661 Y-1.247 E.0014 G1 X50 Y-1.314 E.01062 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.577 Y-1.23 E.00251 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.661 Y-1.247 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.22 Y-.473 ;WIPE_END G1 X50.42 Y-2.111 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.381 Y-2.118 I-.815 J-1.989 E.26418 G1 X50.462 Y-2.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.477 Y-2.542 E.00046 G1 X50.991 Y-2.392 E.01645 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.422 Y-2.547 E.01304 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.477 Y-2.542 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.081 Y-1.526 ;WIPE_END G1 X44.494 Y-.696 Z3.4 F30000 G1 X28.082 Y1.097 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X27.886 Y1.383 E.01067 G3 X25.774 Y-2.143 I-1.689 J-1.384 E.25709 G1 X25.993 Y-2.175 E.00679 G3 X28.123 Y1.028 I.204 J2.174 E.14459 G1 X28.103 Y1.063 E.00124 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X27.886 Y1.383 G1 X27.586 Y1.689 G1 X27.23 Y1.927 G1 X26.834 Y2.091 G1 X26.512 Y2.155 ;WIPE_END G1 X19.064 Y.489 Z3.4 F30000 G1 X7.71 Y-2.052 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X8.552 Y-2.052 E.02793 G1 X8.552 Y3.235 E.1754 G3 X8.761 Y7.668 I1.146 J2.167 E.32691 G1 X8.552 Y7.565 E.00772 G1 X8.552 Y14.052 E.2152 G1 X-4.352 Y14.052 E.42805 G1 X-4.352 Y-2.052 E.5342 G1 X7.67 Y-2.052 E.39879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.71 Y-1.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X8.145 Y-1.645 E.01443 G1 X8.145 Y4.048 E.18884 G3 X9.967 Y3.371 I1.597 J1.509 E.06679 G3 X8.454 Y7.024 I-.269 J2.028 E.24863 G1 X8.145 Y6.752 E.01364 G1 X8.145 Y13.645 E.22864 G1 X-3.945 Y13.645 E.40105 G1 X-3.945 Y-1.645 E.5072 G1 X7.67 Y-1.645 E.38529 G1 X7.71 Y-1.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.71 Y13.21 E.44309 G1 X-3.51 Y13.21 E.34476 G1 X-3.51 Y-1.21 E.44309 G1 X7.67 Y-1.21 E.34353 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.676 Y.79 ;WIPE_END G1 X8.567 Y4.256 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X8.719 Y4.121 E.00622 G3 X9.284 Y3.844 I.978 J1.278 E.01945 G1 X9.496 Y3.803 E.00666 G3 X8.538 Y4.283 I.2 J1.596 E.277 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.719 Y4.121 G1 X8.895 Y4.005 G1 X9.084 Y3.912 G1 X9.284 Y3.844 G1 X9.496 Y3.803 G1 X9.7 Y3.79 G1 X9.91 Y3.803 G1 X10.117 Y3.845 G1 X10.322 Y3.915 G1 X10.381 Y3.944 ;WIPE_END G1 X3.173 Y6.452 Z3.4 F30000 G1 X-16.248 Y13.21 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-16.248 Y14.052 E.02793 G1 X-29.152 Y14.052 E.42805 G1 X-29.152 Y7.565 E.2152 G3 X-29.152 Y3.235 I-1.151 J-2.165 E.33492 G1 X-29.152 Y-2.052 E.1754 G1 X-16.248 Y-2.052 E.42805 G1 X-16.248 Y13.17 E.50494 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.655 Y13.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.655 Y13.645 E.01443 G1 X-28.745 Y13.645 E.40105 G1 X-28.745 Y6.752 E.22864 G3 X-30.567 Y7.429 I-1.597 J-1.509 E.06679 G3 X-29.053 Y3.777 I.269 J-2.028 E.24864 G1 X-28.745 Y4.05 E.01364 G1 X-28.745 Y-1.645 E.18891 G1 X-16.655 Y-1.645 E.40105 G1 X-16.655 Y13.17 E.49144 G1 X-17.09 Y13.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-28.31 Y13.21 E.34476 G1 X-28.31 Y-1.21 E.44309 G1 X-17.09 Y-1.21 E.34476 G1 X-17.09 Y13.17 E.44186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.09 Y13.177 ;WIPE_END G1 X-25.464 Y8.979 Z3.4 F30000 G1 X-29.165 Y6.542 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-29.323 Y6.674 E.00633 G3 X-30.716 Y3.844 I-.981 J-1.275 E.17488 G1 X-30.504 Y3.803 E.00666 G3 X-29.141 Y6.511 I.2 J1.596 E.12154 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.323 Y6.674 G1 X-29.495 Y6.795 G1 X-29.69 Y6.89 G1 X-29.883 Y6.956 G1 X-30.09 Y6.997 G1 X-30.307 Y7.01 G1 X-30.51 Y6.997 G1 X-30.717 Y6.956 G1 X-30.916 Y6.888 G1 X-30.981 Y6.856 ;WIPE_END G1 X-27.48 Y.074 Z3.4 F30000 G1 X-16.008 Y-22.154 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.937 Y-21.921 E.00807 G3 X-18.933 Y-23.66 I-2.369 J.632 E.38338 G1 X-18.612 Y-23.722 E.01085 G3 X-16.036 Y-22.217 I.307 J2.432 E.10639 G1 X-16.024 Y-22.19 E.00096 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.393 Y-22.023 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-16.329 Y-21.816 E.00719 G3 X-18.828 Y-23.265 I-1.975 J.527 E.31963 G1 X-18.56 Y-23.317 E.00908 G3 X-16.412 Y-22.062 I.255 J2.028 E.08871 G1 X-16.411 Y-22.059 E.00011 G1 X-16.805 Y-21.883 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.749 Y-21.704 E.00578 G3 X-18.716 Y-22.844 I-1.554 J.415 E.23298 G1 X-18.504 Y-22.885 E.00666 G3 X-16.823 Y-21.919 I.2 J1.596 E.06393 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.749 Y-21.704 G1 X-16.703 Y-21.498 G1 X-16.69 Y-21.288 G1 X-16.703 Y-21.078 G1 X-16.744 Y-20.871 G1 X-16.812 Y-20.672 G1 X-16.905 Y-20.483 G1 X-17.022 Y-20.308 G1 X-17.161 Y-20.149 G1 X-17.227 Y-20.092 ;WIPE_END G1 X-18.314 Y-27.646 Z3.4 F30000 G1 X-20.21 Y-40.825 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.037 Y-41.025 E.00876 G3 X-18.933 Y-41.66 I1.732 J1.736 E.04272 G1 X-18.612 Y-41.722 E.01085 G3 X-20.249 Y-40.784 I.307 J2.432 E.44673 G1 X-20.237 Y-40.796 E.00057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.904 Y-40.557 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.748 Y-40.736 E.00788 G3 X-18.828 Y-41.265 I1.444 J1.447 E.03561 G1 X-18.56 Y-41.317 E.00908 G3 X-19.931 Y-40.528 I.255 J2.028 E.37214 G1 X-19.576 Y-40.27 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.44 Y-40.428 E.00642 G3 X-18.716 Y-40.844 I1.136 J1.139 E.02594 G1 X-18.504 Y-40.885 E.00666 G3 X-19.601 Y-40.239 I.2 J1.596 E.27034 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.44 Y-40.428 G1 X-19.28 Y-40.566 G1 X-19.105 Y-40.683 G1 X-18.916 Y-40.776 G1 X-18.716 Y-40.844 G1 X-18.504 Y-40.885 G1 X-18.3 Y-40.899 G1 X-18.09 Y-40.885 G1 X-17.883 Y-40.844 G1 X-17.82 Y-40.822 ;WIPE_END G1 X-20.316 Y-33.61 Z3.4 F30000 G1 X-42.748 Y31.21 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y32.052 E.02793 G1 X-47.852 Y32.052 E.16931 G1 X-47.852 Y17.948 E.46786 G1 X-42.748 Y17.948 E.16931 G1 X-42.748 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y31.645 E.01443 G1 X-47.445 Y31.645 E.14231 G1 X-47.445 Y18.355 E.44085 G1 X-43.155 Y18.355 E.14231 G1 X-43.155 Y31.17 E.4251 G1 X-43.59 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y31.21 E.10509 G1 X-47.01 Y18.79 E.38163 G1 X-43.59 Y18.79 E.10509 G1 X-43.59 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y31.193 ;WIPE_END G1 X-44.517 Y38.75 Z3.4 F30000 G1 X-42.748 Y51.21 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.748 Y52.052 E.02793 G1 X-47.852 Y52.052 E.16931 G1 X-47.852 Y37.948 E.46786 G1 X-42.748 Y37.948 E.16931 G1 X-42.748 Y51.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y51.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y51.645 E.01443 G1 X-47.445 Y51.645 E.14231 G1 X-47.445 Y38.355 E.44085 G1 X-43.155 Y38.355 E.14231 G1 X-43.155 Y51.17 E.4251 G1 X-43.59 Y51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-47.01 Y51.21 E.10509 G1 X-47.01 Y38.79 E.38163 G1 X-43.59 Y38.79 E.10509 G1 X-43.59 Y51.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y51.193 ;WIPE_END G1 X-37.981 Y50.591 Z3.4 F30000 G1 X4.752 Y47.21 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y48.052 E.02793 G1 X-25.352 Y48.052 E.99861 G1 X-25.352 Y37.948 E.33517 G1 X4.752 Y37.948 E.99861 G1 X4.752 Y47.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y47.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y47.645 E.01443 G1 X-24.945 Y47.645 E.9716 G1 X-24.945 Y38.355 E.30817 G1 X4.345 Y38.355 E.9716 G1 X4.345 Y47.17 E.29241 G1 X3.91 Y47.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y47.21 E.87327 G1 X-24.51 Y38.79 E.25872 G1 X3.91 Y38.79 E.87327 G1 X3.91 Y47.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y47.173 ;WIPE_END G1 X3.432 Y39.694 Z3.4 F30000 G1 X4.752 Y33.21 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.752 Y34.052 E.02793 G1 X-25.352 Y34.052 E.99861 G1 X-25.352 Y23.948 E.33517 G1 X4.752 Y23.948 E.99861 G1 X4.752 Y33.17 E.30591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.345 Y33.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X4.345 Y33.645 E.01443 G1 X-24.945 Y33.645 E.9716 G1 X-24.945 Y24.355 E.30817 G1 X4.345 Y24.355 E.9716 G1 X4.345 Y33.17 E.29241 G1 X3.91 Y33.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-24.51 Y33.21 E.87327 G1 X-24.51 Y24.79 E.25872 G1 X3.91 Y24.79 E.87327 G1 X3.91 Y33.17 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.91 Y33.173 ;WIPE_END G1 X9.52 Y32.583 Z3.4 F30000 G1 X27.252 Y31.21 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y32.052 E.02793 G1 X22.148 Y32.052 E.16931 G1 X22.148 Y17.948 E.46786 G1 X27.252 Y17.948 E.16931 G1 X27.252 Y31.17 E.4386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.845 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y31.645 E.01443 G1 X22.555 Y31.645 E.14231 G1 X22.555 Y18.355 E.44085 G1 X26.845 Y18.355 E.14231 G1 X26.845 Y31.17 E.4251 G1 X26.41 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.99 Y31.21 E.10509 G1 X22.99 Y18.79 E.38163 G1 X26.41 Y18.79 E.10509 G1 X26.41 Y31.17 E.3804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X24.41 Y31.193 ;WIPE_END G1 X26.41 Y37.948 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X27.252 Y37.948 E.02793 G1 X27.252 Y52.052 E.46786 G1 X22.148 Y52.052 E.16931 G1 X22.148 Y37.948 E.46786 G1 X26.37 Y37.948 E.14005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.41 Y38.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X26.845 Y38.355 E.01443 G1 X26.845 Y51.645 E.44085 G1 X22.555 Y51.645 E.14231 G1 X22.555 Y38.355 E.44085 G1 X26.37 Y38.355 E.12655 G1 X26.41 Y38.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X26.41 Y51.21 E.38163 G1 X22.99 Y51.21 E.10509 G1 X22.99 Y38.79 E.38163 G1 X26.37 Y38.79 E.10386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.376 Y40.79 ;WIPE_END G1 X22.542 Y34.191 Z3.4 F30000 G1 X-28.09 Y-52.948 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-27.248 Y-52.948 E.02793 G1 X-27.248 Y-59.948 E.2322 G1 X6.648 Y-59.948 E1.12439 G1 X6.648 Y-52.948 E.2322 G1 X14.752 Y-52.948 E.26883 G1 X14.752 Y-59.948 E.2322 G1 X31.148 Y-59.948 E.54388 G1 X31.148 Y-52.052 E.26192 G1 X19.148 Y-52.052 E.39806 G1 X19.148 Y-4.948 E1.56253 M73 P49 R40 G1 X28.148 Y-4.948 E.29855 G1 X28.148 Y-2.321 E.08714 G2 X28.148 Y2.321 I-1.945 J2.321 E.45573 G1 X28.148 Y59.948 E1.91159 G1 X26.465 Y59.948 E.05584 G2 X21.935 Y59.948 I-2.265 J-.946 E.32013 G1 X-42.535 Y59.948 E2.13862 G2 X-47.065 Y59.948 I-2.265 J-.946 E.32014 G1 X-48.748 Y59.948 E.05584 G1 X-48.748 Y2.321 E1.91159 G2 X-48.748 Y-2.321 I1.945 J-2.321 E.45573 G1 X-48.748 Y-4.948 E.08714 G1 X-39.748 Y-4.948 E.29855 G1 X-39.748 Y-52.052 E1.56253 G1 X-51.748 Y-52.052 E.39806 G1 X-51.748 Y-59.948 E.26192 G1 X-35.352 Y-59.948 E.54388 G1 X-35.352 Y-52.948 E.2322 G1 X-28.13 Y-52.948 E.23957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.655 Y-53.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-27.655 Y-53.355 E.01443 G1 X-34.945 Y-53.355 E.24182 G1 X-34.945 Y-59.645 E.20865 G1 X-27.655 Y-59.645 E.24182 G1 X-27.655 Y-53.83 E.19289 G1 X-28.09 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.51 Y-53.79 E.19727 G1 X-34.51 Y-59.21 E.16654 G1 X-28.09 Y-59.21 E.19727 G1 X-28.09 Y-53.83 E.16531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.09 Y-53.818 ;WIPE_END G1 X-22.458 Y-53.812 Z3.4 F30000 G1 X7.055 Y-53.79 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.055 Y-59.645 E.19422 G1 X14.345 Y-59.645 E.24182 G1 X14.345 Y-53.355 E.20865 G1 X7.055 Y-53.355 E.24182 G1 X7.055 Y-53.75 E.0131 G1 X7.49 Y-53.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.49 Y-59.21 E.16654 G1 X13.91 Y-59.21 E.19727 G1 X13.91 Y-53.79 E.16654 G1 X7.53 Y-53.79 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.515 Y-55.79 ;WIPE_END G1 X2.272 Y-50.243 Z3.4 F30000 G1 X-40.155 Y-5.355 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.155 Y-51.645 E1.53552 G1 X-52.155 Y-51.645 E.39806 G1 X-52.155 Y-60.355 E.28893 G1 X31.555 Y-60.355 E2.77681 G1 X31.555 Y-51.645 E.28893 G1 X19.555 Y-51.645 E.39806 G1 X19.555 Y-5.355 E1.53552 G1 X28.555 Y-5.355 E.29855 G1 X28.555 Y-1.5 E.12787 G1 X28.387 Y-1.445 E.00586 G2 X28.387 Y1.445 I-2.186 J1.445 E.44457 G1 X28.555 Y1.5 E.00586 G1 X28.555 Y60.355 E1.95232 G1 X25.751 Y60.355 E.09303 G2 X25.647 Y57.553 I-1.608 J-1.344 E.10189 G2 X22.427 Y60.022 I-1.444 J1.45 E.19522 G1 X22.649 Y60.355 E.01328 G1 X-43.249 Y60.355 E2.18599 G2 X-43.353 Y57.553 I-1.608 J-1.344 E.10189 G2 X-46.573 Y60.022 I-1.444 J1.45 E.19522 G1 X-46.351 Y60.355 E.01328 G1 X-49.155 Y60.355 E.09303 G1 X-49.155 Y1.5 E1.95232 G1 X-48.987 Y1.445 E.00586 G2 X-48.987 Y-1.445 I2.186 J-1.445 E.44457 G1 X-49.155 Y-1.5 E.00586 G1 X-49.155 Y-5.355 E.12787 G1 X-40.195 Y-5.355 E.29722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-40.193 Y-7.355 ;WIPE_END G1 X-46.284 Y-2.755 Z3.4 F30000 G1 X-48.8 Y-.855 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-48.729 Y-1.031 E.00582 G3 X-47.226 Y-2.143 I1.926 J1.03 E.05937 G1 X-47.007 Y-2.175 E.00679 G3 X-48.893 Y-.635 I.204 J2.174 E.34227 G1 X-48.815 Y-.819 E.00613 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.729 Y-1.031 G1 X-48.489 Y-1.386 G1 X-48.186 Y-1.689 G1 X-47.83 Y-1.927 G1 X-47.434 Y-2.091 G1 X-47.379 Y-2.105 ;WIPE_END G1 X-47.233 Y5.526 Z3.4 F30000 G1 X-46.197 Y59.801 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-46.291 Y59.611 E.00653 G3 X-45.216 Y57.444 I1.488 J-.612 E.08409 G1 X-45.004 Y57.403 E.00666 G3 X-46.177 Y59.836 I.2 J1.596 E.21205 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-46.291 Y59.611 G1 X-46.356 Y59.417 G1 X-46.397 Y59.21 G1 X-46.41 Y59 G1 X-46.397 Y58.79 G1 X-46.356 Y58.583 G1 X-46.288 Y58.384 G1 X-46.195 Y58.195 G1 X-46.078 Y58.02 G1 X-46.032 Y57.968 ;WIPE_END G1 X-38.403 Y58.171 Z3.4 F30000 G1 X22.803 Y59.801 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X22.709 Y59.611 E.00654 G3 X23.784 Y57.444 I1.488 J-.612 E.08409 G1 X23.996 Y57.403 E.00666 G3 X22.823 Y59.836 I.2 J1.596 E.21204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X22.709 Y59.611 G1 X22.644 Y59.417 G1 X22.603 Y59.21 G1 X22.59 Y59 G1 X22.603 Y58.79 G1 X22.644 Y58.583 G1 X22.712 Y58.384 G1 X22.805 Y58.195 G1 X22.922 Y58.02 G1 X22.968 Y57.968 ;WIPE_END G1 X17.579 Y52.563 Z3.4 F30000 G1 X-40.59 Y-5.79 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-40.59 Y-51.21 E1.39563 G1 X-52.59 Y-51.21 E.36873 G1 X-52.59 Y-60.79 E.29437 G1 X31.99 Y-60.79 E2.59891 G1 X31.99 Y-51.21 E.29437 G1 X19.99 Y-51.21 E.36873 G1 X19.99 Y-5.79 E1.39563 G1 X28.99 Y-5.79 E.27654 G1 X28.99 Y60.79 E2.04582 G1 X-49.59 Y60.79 E2.41454 G1 X-49.59 Y-5.79 E2.04582 G1 X-40.63 Y-5.79 E.27532 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.628 Y-7.79 ;WIPE_END G1 X-42.05 Y-4.654 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-39.585 Y-4.654 E.06829 G1 X-39.454 Y-4.758 E.00464 G1 X-39.454 Y-5.762 E.02782 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.858 Y-3.35 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.858 Y-4.36 E.0335 G1 X-41.239 Y-4.36 E.02051 G2 X-40.251 Y-3.416 I3.239 J-2.402 E.04557 G3 X-39.884 Y-1.778 I-1.407 J1.175 E.05783 G3 X-40.904 Y-.795 I-3.367 J-2.474 E.04722 G2 X-41.271 Y.843 I1.407 J1.175 E.05783 G2 X-40.251 Y1.826 I3.367 J-2.474 E.04722 G3 X-39.884 Y3.464 I-1.407 J1.175 E.05783 G3 X-40.904 Y4.446 I-3.367 J-2.474 E.04722 G2 X-41.271 Y6.084 I1.407 J1.175 E.05783 G2 X-40.251 Y7.067 I3.367 J-2.474 E.04722 G3 X-39.884 Y8.705 I-1.407 J1.175 E.05783 G3 X-40.904 Y9.688 I-3.367 J-2.474 E.04722 G2 X-41.271 Y11.326 I1.407 J1.175 E.05783 G2 X-40.251 Y12.308 I3.367 J-2.474 E.04722 G3 X-39.884 Y13.946 I-1.407 J1.175 E.05783 G3 X-40.904 Y14.929 I-3.367 J-2.474 E.04722 G2 X-41.271 Y16.567 I1.407 J1.175 E.05783 G2 X-40.251 Y17.55 I3.367 J-2.474 E.04722 G1 X-39.878 Y18.205 E.02501 G1 X-39.851 Y18.408 E.00679 G1 X-37.372 Y18.408 E.08222 G1 X-37.257 Y18.205 E.00775 G1 X-37.171 Y17.55 E.02192 G2 X-37.53 Y16.894 I-.934 J.086 E.0255 G1 X-38.283 Y16.239 E.03311 G3 X-38.65 Y14.601 I1.407 J-1.175 E.05783 G3 X-37.63 Y13.619 I3.367 J2.474 E.04722 G2 X-37.263 Y11.981 I-1.407 J-1.175 E.05783 G2 X-38.283 Y10.998 I-3.367 J2.474 E.04722 G3 X-38.65 Y9.36 I1.407 J-1.175 E.05783 G3 X-37.63 Y8.377 I3.367 J2.474 E.04722 G2 X-37.263 Y6.739 I-1.407 J-1.175 E.05783 G2 X-38.283 Y5.757 I-3.367 J2.474 E.04722 G3 X-38.65 Y4.119 I1.407 J-1.175 E.05783 G3 X-37.63 Y3.136 I3.367 J2.474 E.04722 G2 X-37.263 Y1.498 I-1.407 J-1.175 E.05783 G2 X-38.283 Y.515 I-3.367 J2.474 E.04722 G3 X-38.65 Y-1.123 I1.407 J-1.175 E.05783 G3 X-37.63 Y-2.105 I3.367 J2.474 E.04722 G2 X-37.263 Y-3.743 I-1.407 J-1.175 E.05783 G2 X-38.283 Y-4.726 I-3.367 J2.474 E.04722 G3 X-38.65 Y-6.364 I1.407 J-1.175 E.05783 G1 X-38.614 Y-6.408 E.00188 G1 X-35.392 Y-6.408 E.10688 G1 X-35.392 Y-6.272 E.00451 G1 X-35.663 Y-6.036 E.01189 G2 X-36.029 Y-4.398 I1.407 J1.175 E.05783 G2 X-35.392 Y-3.749 I2.206 J-1.527 E.03032 G1 X-35.392 Y-1.03 E.09018 G1 X-35.663 Y-.795 E.01189 G2 X-36.029 Y.843 I1.407 J1.175 E.05783 G2 X-35.392 Y1.492 I2.206 J-1.527 E.03032 G1 X-35.392 Y4.211 E.09018 G1 X-35.663 Y4.446 E.01189 G2 X-36.029 Y6.084 I1.407 J1.175 E.05783 G2 X-35.392 Y6.734 I2.206 J-1.527 E.03032 G1 X-35.392 Y9.452 E.09018 G1 X-35.663 Y9.688 E.01189 G2 X-36.029 Y11.326 I1.407 J1.175 E.05783 G2 X-35.392 Y11.975 I2.206 J-1.527 E.03032 G1 X-35.392 Y14.694 E.09018 G1 X-35.663 Y14.929 E.01189 G2 X-36.029 Y16.567 I1.407 J1.175 E.05783 G2 X-35.392 Y17.216 I2.206 J-1.527 E.03032 G1 X-35.392 Y18.408 E.03952 G1 X-35.829 Y18.408 E.01449 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-35.392 Y18.408 G1 X-35.392 Y17.216 G1 X-35.653 Y16.951 ;WIPE_END G1 X-43.27 Y17.429 Z3.4 F30000 G1 X-48.3 Y17.744 Z3.4 G1 Z3 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X-48.3 Y32.256 E.57795 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.3 Y30.256 ;WIPE_END G1 X-48.3 Y37.744 Z3.4 F30000 G1 Z3 G1 E.8 F1800 G1 F12000 G1 X-48.3 Y52.256 E.57795 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.3 Y50.256 ;WIPE_END G1 X-40.697 Y50.922 Z3.4 F30000 G1 X-16.853 Y53.014 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.372666 G1 F15000 G1 X-16.943 Y52.853 E.00495 G1 X-17.077 Y52.842 E.00362 G1 X-17.188 Y52.937 E.00392 G1 X-17.179 Y53.084 E.00396 G1 X-17.052 Y53.168 E.00409 G1 X-16.91 Y53.121 E.00403 G1 X-16.871 Y53.049 E.00219 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.083 Y52.478 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-17.352 Y52.588 E.00895 G1 X-17.514 Y52.801 E.00822 G1 X-17.557 Y52.996 E.00611 G1 X-17.488 Y53.262 E.00844 G1 X-17.289 Y53.459 E.00861 G1 X-17.032 Y53.527 E.00818 G1 X-16.768 Y53.457 E.0084 G1 X-16.575 Y53.266 E.00836 G1 X-16.476 Y53.028 E.0079 G1 X-16.624 Y52.671 E.01187 G1 X-16.822 Y52.521 E.00764 G1 X-17.043 Y52.484 E.0069 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.793 Y52.124 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.128 Y52.103 E.01031 G1 X-17.489 Y52.218 E.01164 G1 X-17.75 Y52.461 E.01096 G1 X-17.906 Y52.762 E.01041 G1 X-17.92 Y53.128 E.01126 G1 X-17.818 Y53.451 E.01041 G1 X-17.57 Y53.719 E.01121 G1 X-17.268 Y53.876 E.01046 G1 X-16.914 Y53.892 E.01088 G1 X-16.578 Y53.787 E.01081 G1 X-16.317 Y53.549 E.01088 G1 X-16.115 Y53.138 E.01406 G1 X-16.075 Y53.006 E.00424 G1 X-16.251 Y52.538 E.01537 G1 X-16.483 Y52.285 E.01055 G1 X-16.758 Y52.142 E.00949 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.029 Y51.712 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-17.675 Y51.886 I.191 J1.994 E.02067 G2 X-18.273 Y52.663 I.785 J1.223 E.03072 G2 X-15.917 Y53.647 I1.248 J.326 E.11336 G1 X-15.677 Y52.993 E.02141 G1 X-15.918 Y52.353 E.02102 G2 X-16.989 Y51.717 I-1.1 J.633 E.04001 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.026 Y51.332 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.408 Y51.378 E.01183 G1 X-17.862 Y51.554 E.01495 G1 X-18.206 Y51.817 E.01331 G1 X-18.477 Y52.172 E.01372 G1 X-18.64 Y52.564 E.01304 G1 X-18.698 Y52.995 E.01337 G1 X-18.639 Y53.438 E.01372 G1 X-18.477 Y53.83 E.01304 G1 X-18.213 Y54.176 E.01337 G1 X-17.86 Y54.447 E.01368 G1 X-17.466 Y54.61 E.01309 G1 X-17.035 Y54.668 E.01337 G1 X-16.603 Y54.613 E.01339 G1 X-16.2 Y54.447 E.01338 G1 X-15.854 Y54.183 E.01338 G1 X-15.588 Y53.838 E.01338 G2 X-15.279 Y52.98 I-4.714 J-2.179 E.02805 G1 X-15.585 Y52.168 E.02667 G1 X-15.851 Y51.82 E.01344 G1 X-16.19 Y51.559 E.01318 G1 X-16.594 Y51.39 E.01344 G1 X-16.986 Y51.337 E.01217 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-16.594 Y51.39 G1 X-16.19 Y51.559 G1 X-15.851 Y51.82 G1 X-15.585 Y52.168 G1 X-15.479 Y52.449 ;WIPE_END G1 X-7.854 Y52.782 Z3.4 F30000 G1 X-3.402 Y52.977 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.3729 G1 F15000 G1 X-3.482 Y52.853 E.00397 G1 X-3.635 Y52.842 E.00411 G1 X-3.75 Y52.978 E.0048 G1 X-3.658 Y53.147 E.00517 G1 X-3.504 Y53.156 E.00414 G1 X-3.406 Y53.048 E.00392 G1 X-3.404 Y53.017 E.00081 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.604 Y52.468 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-3.89 Y52.581 E.00946 G1 X-4.074 Y52.828 E.00947 G1 X-4.124 Y52.988 E.00516 G1 X-3.975 Y53.329 E.01143 G1 X-3.779 Y53.479 E.00759 G1 X-3.571 Y53.527 E.00654 G1 X-3.308 Y53.457 E.00839 G1 X-3.111 Y53.258 E.0086 G1 X-3.043 Y52.998 E.00826 G1 X-3.112 Y52.74 E.00823 G1 X-3.303 Y52.545 E.00839 G1 X-3.565 Y52.478 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.685 Y52.1 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.019 Y52.22 E.0109 G1 X-4.288 Y52.444 E.01075 G2 X-4.523 Y52.999 I1.525 J.975 E.0186 G1 X-4.349 Y53.462 E.01519 G1 X-4.116 Y53.715 E.01057 G1 X-3.807 Y53.876 E.01072 G1 X-3.454 Y53.892 E.01086 G1 X-3.118 Y53.787 E.0108 G1 X-2.85 Y53.538 E.01126 G1 X-2.694 Y53.239 E.01035 G1 X-2.678 Y52.883 E.01093 G1 X-2.782 Y52.55 E.01075 G1 X-3.022 Y52.286 E.01094 G1 X-3.333 Y52.124 E.01079 G1 X-3.646 Y52.102 E.00963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.718 Y51.718 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.589 Y52.212 I.237 J1.433 E.03143 G2 X-4.922 Y53.01 I2.264 J1.413 E.02667 G1 X-4.682 Y53.647 E.02091 G2 X-2.282 Y52.999 I1.113 J-.648 E.10342 G1 X-2.388 Y52.516 E.0152 G2 X-3.678 Y51.72 I-1.229 J.548 E.04946 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.675 Y51.337 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.204 Y51.457 E.01666 G1 X-4.582 Y51.674 E.01338 G1 X-4.891 Y51.98 E.01337 G1 X-5.115 Y52.37 E.01382 G1 X-5.321 Y53.021 E.02097 G1 X-5.015 Y53.832 E.02664 G1 X-4.747 Y54.182 E.01354 G1 X-4.41 Y54.441 E.01308 G1 X-4.006 Y54.61 E.01344 G1 X-3.575 Y54.668 E.01338 G1 X-3.143 Y54.613 E.01338 G1 X-2.74 Y54.447 E.01338 G1 X-2.394 Y54.183 E.01337 G1 X-2.123 Y53.828 E.01372 G1 X-1.96 Y53.437 E.01304 G1 X-1.902 Y53 E.01353 G1 X-1.957 Y52.573 E.01324 G1 X-2.123 Y52.17 E.01337 G1 X-2.393 Y51.818 E.01363 G1 X-2.73 Y51.559 E.01308 G1 X-3.134 Y51.39 E.01344 G1 X-3.635 Y51.341 E.01548 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.134 Y51.39 G1 X-2.73 Y51.559 G1 X-2.393 Y51.818 G1 X-2.123 Y52.17 G1 X-2.051 Y52.345 ;WIPE_END G1 X5.582 Y52.322 Z3.4 F30000 G1 X27.7 Y52.256 Z3.4 G1 Z3 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X27.7 Y37.744 E.57795 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X27.7 Y39.744 ;WIPE_END G1 X27.7 Y32.256 Z3.4 F30000 G1 Z3 G1 E.8 F1800 G1 F12000 G1 X27.7 Y17.744 E.57795 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X27.7 Y19.744 ;WIPE_END G1 X20.123 Y18.826 Z3.4 F30000 G1 X16.669 Y18.408 Z3.4 G1 Z3 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X15.041 Y18.408 E.05401 G1 X15.156 Y18.205 E.00775 G1 X15.242 Y17.55 E.02192 G2 X14.792 Y16.816 I-1.351 J.324 E.02902 G1 X14.792 Y13.602 E.1066 G2 X15.15 Y11.981 I-1.404 J-1.16 E.0572 G2 X14.792 Y11.575 I-1.359 J.836 E.01803 G1 X14.792 Y8.361 E.1066 G2 X15.15 Y6.739 I-1.404 J-1.16 E.0572 G2 X14.792 Y6.333 I-1.359 J.836 E.01803 G1 X14.792 Y3.12 E.1066 G2 X15.15 Y1.498 I-1.404 J-1.16 E.0572 G2 X14.792 Y1.092 I-1.359 J.836 E.01803 G1 X14.792 Y-2.121 E.1066 G2 X15.15 Y-3.743 I-1.404 J-1.16 E.0572 G2 X14.792 Y-4.149 I-1.359 J.836 E.01803 G1 X14.792 Y-6.408 E.07492 G1 X17.177 Y-6.408 E.07911 G2 X16.384 Y-4.398 I.968 J1.544 E.0767 G2 X17.404 Y-3.416 I3.367 J-2.474 E.04722 G3 X17.77 Y-1.778 I-1.407 J1.175 E.05783 G3 X16.75 Y-.795 I-3.367 J-2.474 E.04722 G2 X16.384 Y.843 I1.407 J1.175 E.05783 G2 X17.404 Y1.826 I3.367 J-2.474 E.04722 G3 X17.77 Y3.464 I-1.407 J1.175 E.05783 G3 X16.75 Y4.446 I-3.367 J-2.474 E.04722 G2 X16.384 Y6.084 I1.407 J1.175 E.05783 G2 X17.404 Y7.067 I3.367 J-2.474 E.04722 G3 X17.77 Y8.705 I-1.407 J1.175 E.05783 G3 X16.75 Y9.688 I-3.367 J-2.474 E.04722 G2 X16.384 Y11.326 I1.407 J1.175 E.05783 G2 X17.404 Y12.308 I3.367 J-2.474 E.04722 G3 X17.77 Y13.946 I-1.407 J1.175 E.05783 G3 X16.75 Y14.929 I-3.367 J-2.474 E.04722 G2 X16.384 Y16.567 I1.407 J1.175 E.05783 G2 X17.404 Y17.55 I3.367 J-2.474 E.04722 G1 X17.777 Y18.205 E.02501 G1 X17.803 Y18.408 E.00679 G1 X20.282 Y18.408 E.08222 G1 X20.397 Y18.205 E.00775 G1 X20.483 Y17.55 E.02192 G2 X20.124 Y16.894 I-.934 J.086 E.0255 G1 X19.371 Y16.239 E.03311 G3 X19.004 Y14.601 I1.407 J-1.175 E.05783 G3 X20.024 Y13.619 I3.367 J2.474 E.04722 G2 X20.391 Y11.981 I-1.407 J-1.175 E.05783 G2 X19.371 Y10.998 I-3.367 J2.474 E.04722 G3 X19.004 Y9.36 I1.407 J-1.175 E.05783 G3 X20.024 Y8.377 I3.367 J2.474 E.04722 G2 X20.391 Y6.739 I-1.407 J-1.175 E.05783 G2 X19.371 Y5.757 I-3.367 J2.474 E.04722 G3 X19.004 Y4.119 I1.407 J-1.175 E.05783 G3 X20.024 Y3.136 I3.367 J2.474 E.04722 G2 X20.391 Y1.498 I-1.407 J-1.175 E.05783 G2 X19.371 Y.515 I-3.367 J2.474 E.04722 G3 X19.004 Y-1.123 I1.407 J-1.175 E.05783 G3 X20.024 Y-2.105 I3.367 J2.474 E.04722 G2 X20.391 Y-3.743 I-1.407 J-1.175 E.05783 G2 X19.792 Y-4.36 I-2.092 J1.434 E.02866 G1 X20.463 Y-4.36 E.02225 G1 X20.484 Y-4.737 E.01253 G1 X21.064 Y-4.737 E.01923 G1 X18.854 Y-5.802 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X18.854 Y-4.785 E.02817 G1 X18.958 Y-4.654 E.00464 G1 X20.145 Y-4.654 E.0329 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X18.958 Y-4.654 G1 X18.854 Y-4.785 G1 X18.854 Y-5.43 ;WIPE_END G1 X25.865 Y-2.413 Z3.4 F30000 G1 X28.535 Y-1.264 Z3.4 G1 Z3 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.393966 G1 F12000 G3 X28.611 Y-.863 I-8.101 J1.76 E.0117 ;WIDTH:0.344557 G1 X28.632 Y-.745 E.00294 ;WIDTH:0.307217 G1 X28.648 Y-.613 E.00286 ;WIDTH:0.276405 G1 X28.663 Y-.495 E.00226 ;WIDTH:0.230421 G1 X28.688 Y-.004 E.00752 G1 X28.664 Y.485 E.00748 ;WIDTH:0.275113 G1 X28.648 Y.613 E.00245 ;WIDTH:0.305491 G1 X28.634 Y.731 E.00254 ;WIDTH:0.342226 G1 X28.611 Y.863 E.00326 ;WIDTH:0.385481 G1 X28.591 Y.981 E.00334 ;WIDTH:0.40952 G1 X28.535 Y1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.591 Y.981 ;WIPE_END G1 X26.878 Y-6.457 Z3.4 F30000 G1 X14.549 Y-60 Z3.4 G1 Z3 G1 E.8 F1800 ;WIDTH:0.345842 G1 F12000 G1 X6.851 Y-60 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.851 Y-60 ;WIPE_END G1 X1.219 Y-60 Z3.4 F30000 G1 X-27.451 Y-60 Z3.4 G1 Z3 G1 E.8 F1800 G1 F12000 G1 X-35.149 Y-60 E.19 G1 X-35.873 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.420601 G1 F12000 G1 X-35.378 Y-59.427 E.02153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-58.893 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.407 Y-59.922 E.04478 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.941 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.378 Y-58.359 E.06802 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-57.825 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.475 Y-59.922 E.09127 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.01 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.378 Y-57.29 E.11452 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-56.756 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.544 Y-59.922 E.13776 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.078 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.378 Y-56.222 E.16101 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-55.688 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.612 Y-59.922 E.18426 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.146 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.378 Y-55.154 E.20751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-54.62 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.68 Y-59.922 E.23075 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.214 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.378 Y-54.086 E.254 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.378 Y-53.552 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.748 Y-59.922 E.27725 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.282 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.378 Y-53.017 E.30049 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-36.793 Y-54.432 ;WIPE_END G1 X-29.223 Y-55.408 Z3.4 F30000 G1 X5.788 Y-59.922 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.622 Y-59.088 E.03626 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.622 Y-58.554 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.254 Y-59.922 E.05951 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.72 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.622 Y-58.02 E.08276 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.622 Y-57.486 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.186 Y-59.922 E.106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.652 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.622 Y-56.952 E.12925 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.622 Y-56.418 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.118 Y-59.922 E.1525 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.584 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.622 Y-55.884 E.17574 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.622 Y-55.35 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.05 Y-59.922 E.19899 SET_VELOCITY_LIMIT ACCEL=10000 G1 X1.515 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.622 Y-54.815 E.22224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.622 Y-54.281 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X.981 Y-59.922 E.24549 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.447 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.622 Y-53.747 E.26873 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.622 Y-53.213 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-.087 Y-59.922 E.29198 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X1.327 Y-58.507 ;WIPE_END G1 X8.951 Y-58.879 Z3.4 F30000 G1 X30.358 Y-59.922 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.122 Y-59.158 E.03323 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.122 Y-58.624 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X29.824 Y-59.922 E.05648 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.29 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.122 Y-58.09 E.07973 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.122 Y-57.556 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.756 Y-59.922 E.10297 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.222 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.122 Y-57.022 E.12622 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.122 Y-56.487 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.687 Y-59.922 E.14947 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.153 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.122 Y-55.953 E.17272 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.122 Y-55.419 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.619 Y-59.922 E.19596 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.085 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.122 Y-54.885 E.21921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.122 Y-54.351 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.551 Y-59.922 E.24246 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.017 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.122 Y-53.817 E.2657 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.122 Y-53.283 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.483 Y-59.922 E.28895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.949 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.122 Y-52.749 E.3122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.122 Y-52.214 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.414 Y-59.922 E.33545 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.88 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X30.723 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.189 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.346 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.812 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X29.655 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.121 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.278 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.744 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.587 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.053 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.21 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.676 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.519 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.985 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.141 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.607 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.451 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.916 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.073 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.539 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.382 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.848 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.005 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.471 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.314 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.78 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.937 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.403 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.246 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.712 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.869 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.778 Y-59.478 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.178 Y-52.078 E.32204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.643 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.778 Y-58.943 E.29879 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.778 Y-58.409 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.109 Y-52.078 E.27555 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.575 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.778 Y-57.875 E.2523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.778 Y-57.341 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.041 Y-52.078 E.22905 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.507 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.778 Y-56.807 E.2058 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.778 Y-56.273 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-51.93 E.18903 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-51.396 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.778 Y-55.739 E.18903 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.778 Y-55.205 F30000 M73 P50 R40 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-50.861 E.18903 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-50.327 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.778 Y-54.67 E.18903 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.778 Y-54.136 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-49.793 E.18903 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-49.259 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.778 Y-53.602 E.18903 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.778 Y-53.068 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-48.725 E.18903 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-48.191 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.391 Y-52.922 E.2059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.857 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-47.657 E.22915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-47.123 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X13.323 Y-52.922 E.2524 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.788 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-46.588 E.27564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-46.054 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X12.254 Y-52.922 E.29889 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.72 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-45.52 E.32214 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-44.986 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X11.186 Y-52.922 E.34539 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.652 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-44.452 E.36863 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-43.918 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X10.118 Y-52.922 E.39188 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.584 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-43.384 E.41513 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-42.85 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X9.05 Y-52.922 E.43837 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.515 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-42.315 E.46162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-41.781 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.981 Y-52.922 E.48487 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.447 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-41.247 E.50812 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-40.713 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.913 Y-52.922 E.53136 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.327 Y-51.507 ;WIPE_END G1 X2.767 Y-56.736 Z3.4 F30000 G1 X-.621 Y-59.922 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-40.179 E.85928 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-39.645 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.155 Y-59.922 E.88253 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.689 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-39.111 E.90577 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-38.577 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.223 Y-59.922 E.92902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.757 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-38.042 E.95227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-37.508 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.292 Y-59.922 E.97552 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.826 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-36.974 E.99876 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-36.44 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.36 Y-59.922 E1.02201 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.894 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-35.906 E1.04526 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-35.372 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.428 Y-59.922 E1.0685 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.962 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-34.838 E1.09175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-34.304 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.496 Y-59.922 E1.115 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.03 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-33.77 E1.13825 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-33.235 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.565 Y-59.922 E1.16149 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8.099 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-32.701 E1.18474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-32.167 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-8.633 Y-59.922 E1.20799 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.167 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-31.633 E1.23123 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-31.099 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-9.701 Y-59.922 E1.25448 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.235 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-30.565 E1.27773 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-30.031 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-10.769 Y-59.922 E1.30098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-11.303 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-29.497 E1.32422 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-28.962 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-11.838 Y-59.922 E1.34747 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.372 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-28.428 E1.37072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-27.894 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-12.906 Y-59.922 E1.39396 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-13.44 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-27.36 E1.41721 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-26.826 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-13.974 Y-59.922 E1.44046 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.508 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-26.292 E1.46371 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-25.758 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.042 Y-59.922 E1.48695 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.576 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-25.224 E1.5102 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-24.689 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.111 Y-59.922 E1.53345 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.645 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-24.155 E1.5567 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-23.621 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.179 Y-59.922 E1.57994 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.713 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-23.087 E1.60319 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-22.553 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.247 Y-59.922 E1.62644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.781 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-22.019 E1.64968 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-21.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.315 Y-59.922 E1.67293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.849 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-20.951 E1.69618 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-20.416 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.384 Y-59.922 E1.71943 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.918 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-19.882 E1.74267 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-19.348 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.452 Y-59.922 E1.76592 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.986 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-18.814 E1.78917 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-18.28 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.52 Y-59.922 E1.81241 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.054 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-17.746 E1.83566 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-17.212 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.588 Y-59.922 E1.85891 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.122 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-16.678 E1.88216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-16.144 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.656 Y-59.922 E1.9054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.191 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-15.609 E1.92865 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-15.075 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.725 Y-59.922 E1.9519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-26.259 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-14.541 E1.97514 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-14.007 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-26.793 Y-59.922 E1.99839 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.222 Y-59.816 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-13.473 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-12.939 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.222 Y-59.282 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.222 Y-58.748 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-12.405 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-11.871 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.222 Y-58.214 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.222 Y-57.68 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-11.336 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-10.802 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.222 Y-57.145 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.222 Y-56.611 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-10.268 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-9.734 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.222 Y-56.077 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.222 Y-55.543 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-9.2 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-8.666 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.222 Y-55.009 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.222 Y-54.475 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-8.132 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.122 Y-7.598 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.222 Y-53.941 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.222 Y-53.407 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.122 Y-7.063 E2.01705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.021 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.271 Y-52.922 E2.0148 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.805 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.487 Y-6.63 E2.0148 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.953 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-28.339 Y-52.922 E2.0148 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-28.873 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.624 Y-41.673 E.48959 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.251 Y-41.766 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.407 Y-52.922 E.48555 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.941 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.743 Y-41.723 E.48739 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.163 Y-41.609 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.475 Y-52.922 E.49236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.01 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.53 Y-41.442 E.49965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.846 Y-41.224 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.544 Y-52.922 E.50911 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.078 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.122 Y-40.965 E.52038 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.356 Y-40.666 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.612 Y-52.922 E.53341 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.146 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.549 Y-40.325 E.54828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.695 Y-39.936 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.68 Y-52.922 E.56519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.214 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.768 Y-39.476 E.58522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.752 Y-38.925 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.748 Y-52.922 E.60919 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.282 Y-52.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.487 Y-38.126 E.64396 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-21.901 Y-39.54 ;WIPE_END G1 X-15.915 Y-39.964 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.418 Y-6.63 E1.45082 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.884 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.822 Y-39.337 E1.42354 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.864 Y-38.845 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.35 Y-6.63 E1.40211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.816 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.979 Y-38.425 E1.38385 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.146 Y-38.058 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.282 Y-6.63 E1.36789 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.748 Y-6.63 F30000 M73 P50 R39 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.364 Y-37.742 E1.3541 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.623 Y-37.467 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y-6.274 E1.35763 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y-5.74 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.922 Y-37.232 E1.37066 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.264 Y-37.039 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y-5.206 E1.38553 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y-4.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.652 Y-36.894 E1.40245 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.113 Y-36.82 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y-4.137 E1.42248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y-3.603 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.663 Y-36.836 E1.44644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.462 Y-37.101 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y-3.069 E1.48121 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y-2.535 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.817 Y-59.922 E2.4977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.351 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y-2.001 E2.52095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y-1.467 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.885 Y-59.922 E2.54419 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.419 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y-.933 E2.56744 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y-.399 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.953 Y-59.922 E2.59069 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.487 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y.136 E2.61394 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y.67 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.021 Y-59.922 E2.63718 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.555 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y1.204 E2.66043 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y1.738 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.09 Y-59.922 E2.68368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.624 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.781 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.315 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.158 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.692 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.849 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.383 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.226 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.76 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.917 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.451 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.294 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.828 Y-59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.985 Y-52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.519 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.363 Y-59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.722 Y-59.746 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.054 Y-52.078 E.33375 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.588 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.722 Y-59.212 E.3105 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.722 Y-58.678 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.122 Y-52.078 E.28725 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.656 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.722 Y-58.144 E.264 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.722 Y-57.61 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.19 Y-52.078 E.24076 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.724 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.722 Y-57.076 E.21751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.722 Y-56.542 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.258 Y-52.078 E.19426 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.792 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.722 Y-56.008 E.17101 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.722 Y-55.473 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.326 Y-52.078 E.14777 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.861 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.722 Y-54.939 E.12452 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.722 Y-54.405 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.395 Y-52.078 E.10127 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.929 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.722 Y-53.871 E.07803 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.722 Y-53.337 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.463 Y-52.078 E.05478 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.997 Y-52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.722 Y-52.803 E.03153 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.997 Y-52.078 ;WIPE_END G1 X-43.365 Y-52.038 Z3.4 F30000 G1 X-39.722 Y-52.019 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y2.272 E2.36299 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y2.806 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-51.485 E2.36299 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-50.951 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y3.34 E2.36299 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y3.874 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-50.417 E2.36299 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-49.883 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.083 Y-2.078 E2.08065 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.549 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-49.349 E2.0574 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-48.815 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.015 Y-2.078 E2.03416 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.481 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-48.281 E2.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-47.746 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.946 Y-2.078 E1.98766 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.412 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-47.212 E1.96442 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-46.678 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.878 Y-2.078 E1.94117 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.344 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.244 Y-22.666 E.89606 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.87 Y-21.758 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.81 Y-2.078 E.85653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.276 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.826 Y-21.181 E.83141 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.891 Y-20.711 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.742 Y-2.078 E.81097 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.208 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.023 Y-20.309 E.79346 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.209 Y-19.961 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X1.673 Y-2.078 E.77834 SET_VELOCITY_LIMIT ACCEL=10000 G1 X1.139 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.439 Y-19.656 E.76506 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.708 Y-19.392 F30000 M73 P51 R39 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X.605 Y-2.078 E.75355 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.071 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.018 Y-19.168 E.74379 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.373 Y-18.989 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-.463 Y-2.078 E.736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-.997 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.785 Y-18.867 E.73069 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.263 Y-18.811 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.531 Y-2.078 E.72826 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.065 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.863 Y-18.876 E.73111 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.449 Y-17.462 ;WIPE_END G1 X-16.922 Y-23.344 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-46.144 E.99234 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-45.61 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.83 Y-23.719 E.95281 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.407 Y-23.762 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-45.076 E.92768 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-44.542 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.877 Y-23.697 E.90724 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.279 Y-23.565 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-44.008 E.88974 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-43.473 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.627 Y-23.379 E.87461 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.932 Y-23.15 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-42.939 E.86133 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-42.405 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.196 Y-22.88 E.84982 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.421 Y-22.57 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-41.871 E.84006 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-41.337 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.6 Y-22.215 E.83227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.722 Y-21.803 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-40.803 E.82696 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-40.269 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.778 Y-21.325 E.82449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.712 Y-20.725 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-39.735 E.82738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-39.201 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.599 Y-2.078 E1.61571 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.134 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-38.666 E1.59246 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-38.132 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.668 Y-2.078 E1.56921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.202 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-37.598 E1.54597 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-37.064 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y-1.721 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y-1.187 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-36.53 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-35.996 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y-.653 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y-.119 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-35.462 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-34.928 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y.416 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y.95 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-34.393 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-33.859 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y1.484 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y2.018 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-33.325 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-32.791 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y2.552 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y3.086 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-32.257 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-31.723 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y3.62 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y4.154 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-31.189 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-30.655 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y4.689 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y5.223 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-30.12 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-29.586 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y5.757 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y6.291 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-29.052 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-28.518 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y6.825 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y7.359 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-27.984 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-27.45 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y7.893 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y8.427 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-26.916 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-26.382 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y8.962 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y9.496 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-25.847 E1.53828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-25.313 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.487 Y-2.078 E1.01128 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.021 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-24.779 E.98803 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-24.245 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.555 Y-2.078 E.96479 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.089 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-23.711 E.94154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-23.177 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.623 Y-2.078 E.91829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.157 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-22.643 E.89504 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-22.109 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.691 Y-2.078 E.8718 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.225 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-21.575 E.84855 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-21.04 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.76 Y-2.078 E.8253 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.294 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-20.506 E.80206 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-19.972 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.828 Y-2.078 E.77881 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.362 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-19.438 E.75556 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-18.904 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.896 Y-2.078 E.73231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.43 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-18.37 E.70907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-17.836 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.964 Y-2.078 E.68582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.498 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-17.302 E.66257 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-16.767 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.033 Y-2.078 E.63933 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.567 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-16.233 E.61608 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-15.699 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-26.101 Y-2.078 E.59283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-26.635 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-15.165 E.56958 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-14.631 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.169 Y-2.078 E.54634 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.703 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-14.097 E.52309 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-13.563 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-28.237 Y-2.078 E.49984 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-28.771 Y-2.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-13.029 E.4766 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-12.494 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y-1.951 E.45888 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y-1.417 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-11.96 E.45888 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-11.426 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y-.883 E.45888 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y-.349 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y-6.34 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y-5.806 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y.185 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y.719 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y-5.272 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y-4.738 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y1.253 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y1.788 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y-4.204 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y-3.67 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y2.322 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y2.856 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y-3.136 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y-2.602 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.516 Y3.052 E.24608 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.175 Y2.927 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y-2.067 E.2174 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y-1.533 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.683 Y2.953 E.19527 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.11 Y3.061 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y-.999 E.17671 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y-.465 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.482 Y3.223 E.16051 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.808 Y3.431 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y.069 E.14631 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y.603 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.088 Y3.685 E.13415 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.328 Y3.979 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y1.137 E.1237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y1.671 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.525 Y4.316 E.1151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.676 Y4.699 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y2.206 E.10853 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y2.74 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.764 Y5.146 E.10471 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.762 Y5.681 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y3.274 E.10479 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y3.808 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.555 Y6.423 E.11382 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.969 Y5.009 ;WIPE_END G1 X-29.599 Y7.776 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y8.197 E.01831 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y8.731 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.046 Y7.864 E.03774 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.581 Y7.862 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y9.265 E.06106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y9.799 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.321 Y7.656 E.09328 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-29.907 Y9.071 ;WIPE_END G1 X-29.178 Y10.334 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y4.342 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y4.876 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y10.868 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y11.402 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y5.41 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y5.944 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y11.936 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y12.47 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y6.478 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y7.013 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y13.004 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.178 Y13.538 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y7.547 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y8.081 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.178 Y14.072 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.593 Y12.658 ;WIPE_END G1 X-34.953 Y6.394 Z3.4 F30000 G1 X-42.831 Y-4.922 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y-4.171 E.03269 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y-3.636 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.365 Y-4.922 E.05594 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y-3.102 E.07918 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y-2.568 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.434 Y-4.922 E.10243 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.968 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y-2.034 E.12568 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y-1.5 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.502 Y-4.922 E.14893 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.036 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y-.966 E.17217 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y-.432 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.57 Y-4.922 E.19542 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.104 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y.102 E.21867 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y.637 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.061 Y-1.344 E.0862 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.797 Y-.546 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y1.171 E.07471 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y1.705 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.747 Y.038 E.07256 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.794 Y.526 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y2.239 E.07458 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y2.773 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.9 Y.953 E.07923 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.055 Y1.332 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y3.307 E.08596 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y3.841 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.247 Y1.675 E.0943 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.476 Y1.979 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y4.375 E.10429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y4.91 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.739 Y2.25 E.11575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.035 Y2.489 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y5.444 E.12859 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y5.978 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.363 Y2.695 E.14287 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.733 Y2.859 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y6.512 E.159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y7.046 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.145 Y2.981 E.17692 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.615 Y3.046 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y7.58 E.19736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y8.114 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.164 Y3.03 E.22127 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.871 Y2.857 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y8.648 E.25206 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y9.183 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y2.541 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y3.075 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y9.717 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y10.251 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y3.609 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y4.143 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y10.785 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y11.319 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y4.678 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y5.212 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y11.853 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y12.387 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y5.746 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y6.28 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y12.921 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y13.456 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y6.814 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y7.348 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y13.99 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y14.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y7.882 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y8.416 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y15.058 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y15.592 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y8.95 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y9.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y16.126 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y16.66 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y10.019 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y10.553 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y17.194 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.08 Y17.728 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y11.087 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y11.621 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.08 Y18.263 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.955 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y12.155 E.25098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y12.689 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.489 Y17.922 E.22773 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.023 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y13.223 E.20448 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y13.758 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.558 Y17.922 E.18123 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.092 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y14.292 E.15799 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y14.826 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.626 Y17.922 E.13474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.16 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y15.36 E.11149 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y15.894 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.694 Y17.922 E.08825 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.228 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y16.428 E.065 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y16.962 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.762 Y17.922 E.04175 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.722 Y16.962 ;WIPE_END G1 X-47.474 Y9.433 Z3.4 F30000 G1 X-45.456 Y-2.739 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.638 Y-4.922 E.09497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.172 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.254 Y-3.003 E.08348 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.838 Y-3.053 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.706 Y-4.922 E.08133 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y-4.403 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.325 Y-3.006 E.06076 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.753 Y-2.9 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y-3.868 E.04217 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y-3.334 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.132 Y-2.745 E.02565 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.722 Y-3.334 ;WIPE_END G1 X-42.877 Y-8.243 Z3.4 F30000 G1 X-39.722 Y-10.892 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.46 Y-6.63 E.1855 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.994 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-10.358 E.16225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-9.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.528 Y-6.63 E.13901 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.062 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-9.29 E.11576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-8.756 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.596 Y-6.63 E.09251 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.13 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-8.221 E.06926 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.722 Y-7.687 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.664 Y-6.63 E.04602 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.198 Y-6.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.722 Y-7.153 E.02277 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.198 Y-6.63 ;WIPE_END G1 X-31.728 Y-5.064 Z3.4 F30000 G1 X-16.222 Y-1.813 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y10.03 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y10.564 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y-1.279 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y-.745 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y11.098 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y11.632 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y-.211 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y.323 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y12.166 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y12.7 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y.857 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y1.391 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.378 Y13.235 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.378 Y13.769 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y1.925 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.807 Y3.34 ;WIPE_END G1 X-7.339 Y1.768 Z3.4 F30000 G1 X8.578 Y-1.583 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y4.409 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y4.943 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y-1.049 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y-.515 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y5.477 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y6.011 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y.019 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y.554 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y6.545 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y7.079 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X12.018 Y4.527 E.11108 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.168 Y5.212 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y7.613 E.10452 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y8.147 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X12.157 Y5.735 E.10501 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.054 Y6.166 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y8.682 E.10949 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y9.216 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X11.897 Y6.542 E.11635 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.693 Y6.873 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y9.75 E.12521 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y10.284 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X11.447 Y7.161 E.13594 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.156 Y7.404 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y10.818 E.14858 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y11.352 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X10.824 Y7.606 E.16305 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.445 Y7.761 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y11.886 E.17954 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y12.42 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X10.01 Y7.861 E.19846 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.482 Y7.866 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y12.954 E.22145 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y13.489 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.785 Y7.703 E.25179 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y8.031 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y14.023 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y14.557 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y8.565 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y9.099 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y15.091 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y15.625 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y9.634 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y10.168 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y16.159 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y16.693 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y10.702 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y11.236 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y17.227 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.57 Y17.762 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y11.77 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y12.304 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.57 Y18.296 E.26077 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X13.156 Y16.881 ;WIPE_END G1 X11.031 Y9.551 Z3.4 F30000 G1 X8.578 Y1.088 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X10.574 Y3.083 E.08686 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.888 Y2.932 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y1.622 E.05701 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y2.156 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X9.366 Y2.944 E.03428 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.934 Y3.046 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y2.69 E.01548 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.934 Y3.046 ;WIPE_END G1 X16.565 Y2.877 Z3.4 F30000 G1 X27.747 Y2.63 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y3.005 E.01631 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y3.539 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.393 Y2.811 E.0317 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.995 Y2.946 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y4.073 E.04904 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y4.607 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.547 Y3.033 E.06852 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.026 Y3.046 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y5.141 E.09119 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y5.675 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.388 Y2.942 E.11897 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.802 Y4.356 ;WIPE_END G1 X24.306 Y2.394 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y6.21 E.16608 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.707 Y4.795 ;WIPE_END G1 X27.859 Y-2.75 Z3.4 F30000 G1 X28.122 Y-4.473 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.673 Y-4.922 E.01953 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.139 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y-3.939 E.04278 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y-3.405 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.605 Y-4.922 E.06602 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.071 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y-2.871 E.08927 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.978 Y-2.48 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.536 Y-4.922 E.10628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.002 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.972 Y-2.952 E.08573 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.342 Y-3.048 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.468 Y-4.922 E.08156 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.934 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.827 Y-3.029 E.08239 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.381 Y-2.94 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.4 Y-4.922 E.08624 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.866 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.986 Y-2.801 E.09229 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.634 Y-2.619 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.332 Y-4.922 E.10023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.798 Y-4.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.317 Y-2.402 E.10966 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.033 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y-4.705 E.11111 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y-4.171 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.785 Y-1.866 E.10033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.57 Y-1.547 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y-3.637 E.09096 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y-3.103 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.389 Y-1.193 E.0831 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.254 Y-.795 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y-2.568 E.0772 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y-2.034 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.167 Y-.347 E.07343 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.154 Y.174 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y-1.5 E.07285 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y-.966 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.258 Y.812 E.07739 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X21.844 Y-.602 ;WIPE_END G1 X23.806 Y1.894 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y-.432 E.10125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y.102 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y6.744 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y7.278 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y.636 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y1.17 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y7.812 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y8.346 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y1.705 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y2.239 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y8.88 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y9.414 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y2.773 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y3.307 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y9.948 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y10.483 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y3.841 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y4.375 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y11.017 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y11.551 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y4.909 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y5.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y12.085 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y12.619 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y5.977 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y6.512 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y13.153 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y13.687 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y7.046 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y7.58 F30000 M73 P51 R38 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y14.221 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y14.755 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y8.114 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y8.648 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y15.29 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y15.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y9.182 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y9.716 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y16.358 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y16.892 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y10.25 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y10.785 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y17.426 E.28907 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.879 Y17.718 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y11.319 E.27853 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y11.853 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.408 Y17.781 E.258 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.015 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y12.387 E.24089 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y12.921 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.481 Y17.922 E.21764 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.946 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y13.455 E.1944 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y13.989 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.412 Y17.922 E.17115 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.878 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y14.523 E.1479 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y15.058 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.344 Y17.922 E.12465 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.81 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y15.592 E.10141 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y16.126 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.276 Y17.922 E.07816 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.742 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y16.66 E.05491 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y17.194 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.208 Y17.922 E.03167 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y18.37 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.48 Y17.728 E.02792 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.48 Y18.262 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y18.904 E.02792 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y19.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.314 Y18.63 E.03516 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.78 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y19.972 E.05841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y20.506 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.246 Y18.63 E.08165 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.711 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y21.04 E.1049 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y21.574 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.177 Y18.63 E.12815 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.643 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y22.109 E.1514 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y22.643 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.109 Y18.63 E.17464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.575 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y23.177 E.19789 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y23.711 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.041 Y18.63 E.22114 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.507 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y24.245 E.24438 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y24.779 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.973 Y18.63 E.26763 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.438 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y25.313 E.29088 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y25.847 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.904 Y18.63 E.31413 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X16.319 Y20.044 ;WIPE_END G1 X10.732 Y14.844 Z3.4 F30000 G1 X8.578 Y12.838 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y26.381 E.58945 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y26.916 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.578 Y13.372 E.58945 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.578 Y13.907 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y27.45 E.58945 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y27.984 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.216 Y14.078 E.60522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.682 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y28.518 E.62847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y29.052 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.148 Y14.078 E.65172 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.614 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y29.586 E.67496 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y30.12 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.08 Y14.078 E.69821 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.546 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y30.654 E.72146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y31.189 F30000 M73 P52 R38 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.011 Y14.078 E.74471 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.477 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y31.723 E.76795 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X20.707 Y30.308 ;WIPE_END G1 X27.488 Y32.282 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y32.916 E.02758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y33.45 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.75 Y32.078 E.05969 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.216 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y33.984 E.08293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y34.518 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.682 Y32.078 E.10618 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.148 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y35.052 E.12943 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y35.586 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.614 Y32.078 E.15267 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.08 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y36.12 E.17592 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y36.654 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.546 Y32.078 E.19917 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.011 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y37.189 E.22242 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.117 Y37.718 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.477 Y32.078 E.24546 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X23.892 Y33.493 ;WIPE_END G1 X27.583 Y37.718 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.943 Y14.078 E1.02889 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.409 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.252 Y37.922 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.718 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.875 Y14.078 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.341 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.184 Y37.922 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.65 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X1.807 Y14.078 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X1.273 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.116 Y37.922 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.582 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X.738 Y14.078 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.204 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.047 Y37.922 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.513 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-.33 Y14.078 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-.864 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.979 Y37.922 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.445 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.398 Y14.078 E1.03775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.932 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y38.132 E1.04692 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y38.666 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.466 Y14.078 E1.07017 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y39.2 E1.09341 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y39.735 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.535 Y14.078 E1.11666 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.069 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y40.269 E1.13991 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y40.803 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y2.46 E1.66885 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y2.994 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.706 Y23.922 E.91087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.172 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y3.528 E.88762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y4.062 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.638 Y23.922 E.86437 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.104 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y4.596 E.84112 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y5.13 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.57 Y23.922 E.81788 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.036 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y5.664 E.79463 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y6.198 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X1.502 Y23.922 E.77138 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.967 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y6.733 E.74814 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y7.267 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X.433 Y23.922 E.72489 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-.101 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y7.801 E.70164 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y8.335 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-.635 Y23.922 E.67839 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.169 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y8.869 E.65515 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y9.403 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.703 Y23.922 E.6319 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.237 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y9.937 E.60865 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y10.471 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.771 Y23.922 E.58541 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.306 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y11.006 E.56216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y11.54 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.84 Y23.922 E.53891 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.374 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y12.074 E.51566 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y12.608 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.908 Y23.922 E.49242 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.442 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.222 Y13.142 E.46917 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.222 Y13.676 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.976 Y23.922 E.44592 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.51 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.353 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.888 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.044 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.579 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.422 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.956 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-8.113 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8.647 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.49 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.024 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-9.181 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.715 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.558 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.092 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-10.249 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.783 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.626 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.161 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-11.317 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-11.851 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.695 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.229 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-12.386 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.92 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.763 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.297 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-13.454 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-13.988 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.831 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.365 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.522 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.056 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.899 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.434 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.59 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.124 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.968 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-26.502 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.659 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.193 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.036 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.57 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.727 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.261 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-28.104 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-28.638 Y14.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.795 Y23.922 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.329 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.172 Y14.078 E.42841 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-27.758 Y15.493 ;WIPE_END G1 X-33.353 Y10.301 Z3.4 F30000 G1 X-35.17 Y8.615 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.863 Y23.922 E.66621 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.397 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y9.149 E.64296 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y9.683 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.932 Y23.922 E.61971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.466 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y10.217 E.59646 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y10.751 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22 Y23.922 E.57322 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.534 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y11.286 E.54997 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y11.82 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.068 Y23.922 E.52672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.602 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y12.354 E.50348 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y12.888 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.136 Y23.922 E.48023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.67 Y23.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y13.422 E.45698 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y13.956 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.205 Y23.922 E.43373 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y24.282 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y14.49 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y15.024 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y24.816 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y25.35 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y15.559 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y16.093 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y25.884 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y26.418 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y16.627 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y17.161 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y26.952 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y27.487 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.17 Y17.695 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.17 Y18.229 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y28.021 E.42617 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y28.555 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.303 Y18.63 E.43196 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.837 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y29.089 E.45521 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y29.623 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.371 Y18.63 E.47846 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.905 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y30.157 E.50171 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y30.691 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.44 Y18.63 E.52495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.974 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y31.225 E.5482 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y31.76 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.508 Y18.63 E.57145 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.042 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y32.294 E.5947 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y32.828 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.576 Y18.63 E.61794 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.11 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y33.362 E.64119 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y33.896 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.644 Y18.63 E.66444 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.23 Y20.044 ;WIPE_END G1 X-31.628 Y20.727 Z3.4 F30000 G1 X4.778 Y23.994 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y41.337 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y41.871 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y24.528 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y25.062 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y42.405 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y42.939 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y25.596 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y26.13 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y43.473 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y44.008 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y26.664 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y27.198 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y44.542 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y45.076 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y27.733 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y28.267 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y45.61 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y46.144 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y28.801 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y29.335 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y46.678 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y47.212 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y29.869 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y30.403 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y47.746 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y48.28 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y30.937 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y31.471 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y48.815 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y49.349 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y32.006 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y32.54 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y49.883 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y50.417 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y33.074 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y33.608 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y50.951 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.122 Y51.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.715 Y34.078 E.75762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.181 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.122 Y52.019 E.78086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X20.707 Y50.605 ;WIPE_END G1 X27.725 Y52.282 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y52.678 E.01724 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y53.212 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.988 Y52.078 E.04935 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.454 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y53.746 E.0726 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y54.28 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.92 Y52.078 E.09584 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.385 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y54.815 E.11909 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y55.349 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.851 Y52.078 E.14234 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.317 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y55.883 E.16558 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y56.417 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.783 Y52.078 E.18883 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.249 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y56.951 E.21208 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y57.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.715 Y52.078 E.23533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.181 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y58.019 E.25857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y58.553 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.647 Y34.078 E1.06525 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.112 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.122 Y59.088 E1.0885 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.122 Y59.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.434 Y57.934 E.07346 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.661 Y58.695 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.887 Y59.922 E.05339 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.353 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.665 Y59.234 E.02994 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X27.353 Y59.922 ;WIPE_END G1 X25.265 Y56.765 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.578 Y34.078 E.98742 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.044 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.505 Y56.539 E.97759 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.966 Y56.535 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X1.51 Y34.078 E.97739 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.976 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.516 Y56.618 E.98102 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.131 Y56.767 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y38.415 E.79877 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y38.949 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.793 Y56.963 E.78405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.497 Y57.201 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y39.483 E.77117 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y40.017 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.241 Y57.48 E.76003 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.03 Y57.803 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y40.552 E.75087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y41.086 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.866 Y58.174 E.74374 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.756 Y58.597 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y41.62 E.73894 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y42.154 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.726 Y59.101 E.73762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.84 Y59.75 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y42.688 E.74261 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y43.222 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.478 Y59.922 E.72683 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.944 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y43.756 E.70358 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y44.29 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.41 Y59.922 E.68034 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.876 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y44.824 E.65709 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y45.359 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.341 Y59.922 E.63384 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.807 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y45.893 E.61059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y46.427 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.273 Y59.922 E.58735 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.739 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y46.961 E.5641 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.778 Y47.495 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.205 Y59.922 E.54085 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.671 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.778 Y48.029 E.51761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.294 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.137 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.603 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.759 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.225 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.068 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.534 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.691 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.157 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.466 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X1.623 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X1.089 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X12.932 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.398 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X.555 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.021 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X11.864 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.33 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-.514 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.048 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X10.795 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.261 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.582 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.116 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X9.727 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.193 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.65 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.184 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.659 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.125 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.718 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.252 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.591 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.057 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.787 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.321 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.522 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.988 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.113 Y51.82 E.35262 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.708 Y52.759 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.454 Y59.922 E.31174 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.92 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.716 Y53.285 E.28885 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.831 Y53.705 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.386 Y59.922 E.27057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.852 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.019 Y54.05 E.25554 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.26 Y54.344 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.318 Y59.922 E.24278 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.784 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.56 Y54.578 E.23256 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.916 Y54.757 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.25 Y59.922 E.2248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X1.715 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.343 Y54.863 E.22018 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.894 Y54.846 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X1.181 Y59.922 E.22092 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-.233 Y58.507 ;WIPE_END G1 X-2.394 Y51.539 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.855 Y48.078 E.15062 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.389 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.329 Y51.138 E.13317 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.855 Y51.146 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.923 Y48.078 E.13353 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.457 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.275 Y51.261 E.1385 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.621 Y51.449 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.991 Y48.078 E.14669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8.525 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.914 Y51.69 E.1572 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.148 Y51.99 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-9.06 Y48.078 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.594 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.327 Y52.346 E.18572 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.462 Y52.744 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-10.128 Y48.078 E.20308 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.662 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.45 Y53.29 E.22683 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-6.864 Y51.876 ;WIPE_END G1 X-11.196 Y48.078 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X.647 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.113 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-11.73 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.264 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-.421 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-.955 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-12.798 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-13.332 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.489 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.023 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-13.867 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.401 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.558 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.092 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.935 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.469 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.626 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.16 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.003 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.537 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.694 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.228 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.071 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.605 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.762 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.296 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.14 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.674 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.831 Y59.922 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.365 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.208 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.742 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.656 Y51.164 E.13429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.22 Y51.135 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.276 Y48.078 E.13302 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.81 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.655 Y51.234 E.13732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.017 Y51.406 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.344 Y48.078 E.14483 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.878 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.319 Y51.638 E.15493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.565 Y51.926 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.413 Y48.078 E.16746 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.947 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.758 Y52.267 E.18232 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.877 Y52.682 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.481 Y48.078 E.20037 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.015 Y48.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.895 Y53.199 E.22285 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.591 Y54.037 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.549 Y48.078 E.25933 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-23.135 Y49.493 ;WIPE_END G1 X-16.04 Y52.306 Z3.4 F30000 G1 X-15.17 Y52.65 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.899 Y59.922 E.31647 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8.433 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.128 Y53.226 E.2914 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.264 Y53.625 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-8.967 Y59.922 E.27405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.501 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.436 Y53.987 E.25831 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.668 Y54.289 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-10.035 Y59.922 E.24516 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.569 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.955 Y54.535 E.23442 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.297 Y54.728 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-11.104 Y59.922 E.22605 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-11.638 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.712 Y54.847 E.22086 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.229 Y54.865 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-12.172 Y59.922 E.2201 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.706 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.07 Y54.558 E.23347 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.656 Y55.972 ;WIPE_END G1 X-13.24 Y59.922 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.083 Y48.078 E.51546 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-23.669 Y49.493 ;WIPE_END G1 X-17.238 Y45.381 Z3.4 F30000 G1 X.442 Y34.078 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.285 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.751 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-.092 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-.626 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.217 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.683 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.161 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.695 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X2.149 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X1.614 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.229 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.763 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X1.08 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.546 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.297 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.831 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X.012 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-.522 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.365 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.899 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.056 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.59 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.434 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.968 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.124 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.659 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.502 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.036 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.193 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.727 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.57 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8.104 Y34.078 F30000 M73 P53 R38 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.261 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.795 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-8.638 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.172 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.329 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.863 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-9.706 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.241 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.397 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.932 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-10.775 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-11.309 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.466 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-11.843 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.377 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-8.534 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.068 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-12.911 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-13.445 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-9.602 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.136 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-13.979 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.514 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-10.67 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-11.205 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.048 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.582 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-11.739 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.273 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.116 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.65 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-12.807 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-13.341 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.184 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.718 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-13.875 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.409 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.252 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.787 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.943 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.478 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.321 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.855 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.012 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.546 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.389 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.923 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.08 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.614 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.457 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.991 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.148 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.682 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.525 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.06 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.216 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.75 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.594 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.128 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.285 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.819 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.662 Y34.078 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.196 Y34.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.353 Y37.922 E.16727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.887 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.178 Y18.63 E.83965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.713 Y18.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.421 Y37.922 E.83965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.955 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y18.155 E.86031 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y18.689 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.489 Y37.922 E.83707 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.023 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y19.223 E.81382 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y19.758 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.558 Y37.922 E.79057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.092 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y20.292 E.76733 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y20.826 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y38.169 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y38.703 F30000 M73 P53 R37 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y21.36 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y21.894 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y39.237 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y39.771 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y22.428 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y22.962 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y40.305 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y40.84 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y23.496 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y24.031 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y41.374 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y41.908 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y24.565 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y25.099 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y42.442 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y42.976 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y25.633 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y26.167 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y43.51 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y44.044 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y26.701 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y27.235 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y44.578 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y45.113 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y27.769 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y28.304 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y45.647 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y46.181 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y28.838 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y29.372 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y46.715 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.378 Y47.249 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y29.906 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y30.44 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.378 Y47.783 E.75485 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-26.793 Y46.369 ;WIPE_END G1 X-21.505 Y51.873 Z3.4 F30000 G1 X-13.774 Y59.922 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y30.974 E1.25991 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y31.508 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.308 Y59.922 E1.23667 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.842 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y32.042 E1.21342 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.22 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.376 Y59.922 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.911 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.754 Y32.078 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.288 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.445 Y59.922 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.979 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.822 Y32.078 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.356 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.513 Y59.922 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.047 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.89 Y32.078 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.424 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.581 Y59.922 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.115 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.959 Y32.078 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.493 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.649 Y59.922 E1.21185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.184 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.008 Y32.097 E1.21102 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.357 Y32.282 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.718 Y59.922 E1.20299 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.252 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y38.452 E.93445 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y38.986 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.786 Y59.922 E.9112 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.32 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y39.52 E.88796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y40.054 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.854 Y59.922 E.86471 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.388 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y40.588 E.84146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y41.122 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.922 Y59.922 E.81822 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.457 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y41.657 E.79497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y42.191 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.991 Y59.922 E.77172 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.525 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y42.725 E.74847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y43.259 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-26.059 Y59.922 E.72523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-26.593 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y43.793 E.70198 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y44.327 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.127 Y59.922 E.67873 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.661 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y44.861 E.65549 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y45.395 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-28.195 Y59.922 E.63224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-28.73 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y45.93 E.60899 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y46.464 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.264 Y59.922 E.58574 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.798 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y46.998 E.5625 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y47.532 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.332 Y59.922 E.53925 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.866 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y48.066 E.516 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y48.6 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.4 Y59.922 E.49276 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.934 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y49.134 E.46951 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y49.668 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.468 Y59.922 E.44626 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.003 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y50.203 E.42301 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y50.737 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.537 Y59.922 E.39977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.071 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.722 Y51.271 E.37652 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.722 Y51.805 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.605 Y59.922 E.35327 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.139 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.982 Y52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.516 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.673 Y59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.207 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.05 Y52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.585 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.741 Y59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.275 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.119 Y52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.653 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.81 Y59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.344 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.187 Y52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.721 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.878 Y59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.412 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.255 Y52.078 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.789 Y52.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.946 Y59.922 E.34137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.48 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.671 Y57.731 E.09534 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.361 Y58.575 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.014 Y59.922 E.05859 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.548 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.329 Y59.142 E.03395 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.397 Y59.607 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.083 Y59.922 E.01368 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-42.397 Y59.607 ;WIPE_END G1 X-43.531 Y56.871 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.12 Y52.282 E.19972 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.654 Y52.282 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.375 Y56.561 E.18622 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.942 Y56.529 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y52.748 E.16452 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y53.283 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.407 Y56.597 E.14425 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.803 Y56.735 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y53.817 E.12701 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y54.351 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.149 Y56.924 E.11199 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.451 Y57.155 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y54.885 E.09882 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y55.419 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.713 Y57.427 E.08741 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.935 Y57.74 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y55.953 E.07776 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y56.487 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.109 Y58.1 E.0702 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.228 Y58.515 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y57.021 E.06503 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y57.556 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.281 Y58.997 E.06272 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.203 Y59.608 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y58.09 E.0661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y58.624 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.424 Y59.922 E.05648 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.958 Y59.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y59.158 E.03324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-47.958 Y59.922 ;WIPE_END G1 X-46.361 Y52.458 Z3.4 F30000 G1 X-43.252 Y37.922 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y32.452 E.23807 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y32.986 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.786 Y37.922 E.21482 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.32 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y33.52 E.19157 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y34.054 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.854 Y37.922 E.16832 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.388 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y34.588 E.14508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y35.122 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.922 Y37.922 E.12183 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.457 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y35.657 E.09858 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y36.191 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.991 Y37.922 E.07534 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.525 Y37.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.722 Y36.725 E.05209 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.722 Y37.259 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.262 Y37.718 E.01998 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.722 Y37.259 ;WIPE_END G1 X-48.809 Y29.627 Z3.4 F30000 G1 X-49.135 Y1.264 Z3.4 G1 Z3 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.393963 G1 F12000 G3 X-49.211 Y.863 I8.115 J-1.762 E.0117 ;WIDTH:0.344556 G1 X-49.232 Y.745 E.00294 ;WIDTH:0.307216 G1 X-49.248 Y.613 E.00286 ;WIDTH:0.276404 G1 X-49.263 Y.495 E.00226 ;WIDTH:0.23042 G1 X-49.288 Y.004 E.00752 G1 X-49.264 Y-.485 E.00748 ;WIDTH:0.275113 G1 X-49.248 Y-.613 E.00245 ;WIDTH:0.305489 G1 X-49.234 Y-.731 E.00254 ;WIDTH:0.342226 G1 X-49.211 Y-.863 E.00326 ;WIDTH:0.38548 G1 X-49.191 Y-.981 E.00334 ;WIDTH:0.40952 G1 X-49.135 Y-1.264 E.00864 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.191 Y-.981 ;WIPE_END G1 X-47.051 Y-8.307 Z3.4 F30000 G1 X-42.652 Y-23.367 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 ;LAYER_CHANGE ;Z:3.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z3.6 I-.257 J1.19 P1 F30000 G1 X49.547 Y-1.668 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.589 Y-1.676 E.00143 G1 X50 Y-1.758 E.01389 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.508 Y-1.66 E.0061 G1 X49.632 Y-1.241 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.674 Y-1.249 E.00132 G1 X50 Y-1.314 E.01021 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.593 Y-1.233 E.00299 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.674 Y-1.249 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.223 Y-.457 ;WIPE_END G1 X50.417 Y-2.111 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00008 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50 Y-2.15 I-.815 J-1.989 E.25149 G1 X50.378 Y-2.115 E.01258 G1 X50.46 Y-2.544 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.474 Y-2.542 E.00042 G1 X50.991 Y-2.392 E.01655 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.42 Y-2.548 E.01297 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.474 Y-2.542 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.08 Y-1.527 ;WIPE_END G1 X49.112 Y-8.559 Z3.6 F30000 G1 X30.752 Y-52.052 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z3.6 F30000 G1 X18.752 Y-10.052 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X14.502 Y-6.698 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X19.3 Y-6.698 E.15916 G1 F2400 G1 X20.2 Y-6.698 E.02985 G1 F600 G1 X20.4 Y-6.698 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X21.548 Y-6.698 E.03808 G1 X21.548 Y-6.2 E.01652 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X21.548 Y-6 E.00663 M106 S255 G1 F2400 G1 X21.548 Y-5.1 E.02985 G1 F18000 G1 X21.548 Y18.698 E.78942 G1 X14.502 Y18.698 E.23373 G1 X14.502 Y-6.658 E.84111 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X19.3 Y-7.105 E.17266 G1 F2400 G1 X20.2 Y-7.105 E.02985 G1 F600 G1 X20.4 Y-7.105 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X21.955 Y-7.105 E.05158 G1 X21.955 Y-6.2 E.03002 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X21.955 Y-6 E.00663 M106 S255 G1 F2400 G1 X21.955 Y-5.1 E.02985 G1 F18000 G1 X21.955 Y19.105 E.80292 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.36 Y-7.54 E.17515 G1 F2400 G1 X20.2 Y-7.54 E.02581 G1 F600 G1 X20.4 Y-7.54 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X22.39 Y-7.54 E.06601 G1 X22.39 Y-6.2 E.04445 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X22.39 Y-6 E.00615 M106 S255 G1 F2400 G1 X22.39 Y-5.16 E.02581 G1 F12000 G1 X22.39 Y19.54 E.75896 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.512 ;WIPE_END G1 X14.713 Y-6.045 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.417 E.05401 G1 X15.278 Y-4.071 E.02197 G1 X15.476 Y-3.743 E.0127 G3 X14.713 Y-2.2 I-2.037 J-.046 E.05896 G1 X14.713 Y-3.446 E.04135 G1 X17.663 Y-5.058 F30000 G1 F16200 G1 X16.494 Y-3.925 E.05401 G3 X16.083 Y-4.726 I.292 J-.656 E.03228 G3 X17.565 Y-6.487 I2.591 J.677 E.07892 G1 X18.753 Y-6.487 E.03941 G2 X18.701 Y-6.063 I.271 J.248 E.0151 G1 X17.663 Y-5.058 E.04794 G1 X20.631 Y-3.964 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X16.305 Y.227 E.30835 G1 X16.34 Y-.226 E.02324 G1 X15.723 Y.164 E.03738 G1 X20.222 Y-4.194 E.3207 G1 X20.035 Y-4.392 E.01393 G1 X20.049 Y-4.636 E.01253 G1 X20.032 Y-4.636 E.00091 G1 X14.735 Y.495 E.3776 G1 X14.735 Y-.131 E.03208 G1 X19.385 Y-4.636 E.3315 G1 X19.09 Y-4.636 E.01511 G1 X18.917 Y-4.809 E.01253 G1 X14.735 Y-.758 E.29813 G1 X14.735 Y-1.384 E.03208 G1 X19.039 Y-5.554 E.30683 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X17.602 Y-4.162 ;WIPE_END G17 G3 Z3.6 I.566 J1.077 P1 F30000 G1 X21.522 Y-6.222 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 ;HEIGHT:0.2 G1 F600 M106 S255 G1 X20.2 Y-6.222 E.04062 G1 F1500 G1 X19.25 Y-6.222 E.02919 G1 X19.25 Y-5.845 E.01158 G1 X21.352 Y-5.845 E.06459 G1 X21.352 Y-5.468 E.01158 G1 X19.25 Y-5.468 E.06459 G1 X19.25 Y-5.091 E.01158 G1 X21.522 Y-5.091 E.06981 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.481 Y.072 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 M106 S255 G1 X16.311 Y1.205 E.05401 G1 X17.324 Y1.826 E.0394 G3 X18.096 Y3.464 I-1.782 J1.842 E.0614 G1 X17.898 Y3.791 E.0127 G1 X16.83 Y4.446 E.04156 G2 X16.058 Y6.084 I1.782 J1.842 E.0614 G1 X16.256 Y6.412 E.0127 G1 X17.324 Y7.067 E.04156 G3 X18.096 Y8.705 I-1.782 J1.842 E.0614 G1 X17.898 Y9.032 E.0127 G1 X16.83 Y9.688 E.04156 G2 X16.058 Y11.326 I1.782 J1.842 E.0614 G1 X16.256 Y11.653 E.0127 G1 X17.324 Y12.308 E.04156 G1 X17.852 Y12.995 E.02875 G1 X20.145 Y11.424 E.09221 G3 X18.678 Y9.36 I.843 J-2.152 E.08887 G1 X18.876 Y9.032 E.0127 G1 X19.944 Y8.377 E.04156 G2 X20.717 Y6.739 I-1.782 J-1.842 E.0614 G1 X20.519 Y6.412 E.0127 G1 X19.451 Y5.757 E.04156 G3 X18.678 Y4.119 I1.782 J-1.842 E.0614 G1 X18.876 Y3.791 E.0127 G1 X19.944 Y3.136 E.04156 G2 X20.717 Y1.498 I-1.782 J-1.842 E.0614 G1 X20.519 Y1.171 E.0127 G1 X19.451 Y.515 E.04156 G3 X18.681 Y-1.091 I1.785 J-1.844 E.06035 G3 X19.944 Y-2.105 I2.908 J2.329 E.05418 G1 X20.491 Y-2.845 E.03051 G1 X21.106 Y-3.44 E.02838 G1 X20.747 Y-4.263 E.02977 G1 X20.474 Y-4.552 E.01319 G1 X20.48 Y-4.658 E.00352 G1 X21.319 Y-4.658 E.02783 G2 X21.337 Y12.925 I1365.998 J7.376 E.58325 G1 X21.251 Y12.957 E.00304 G1 X21.337 Y18.258 F30000 G1 F16200 G3 X21.337 Y16.202 I32.461 J-1.028 E.0682 G1 X21.337 Y14.919 E.04257 G1 X19.437 Y16.222 E.07641 G1 X20.519 Y16.894 E.04226 G1 X20.717 Y17.222 E.0127 G3 X20.239 Y18.487 I-2.317 J-.153 E.04552 G1 X17.94 Y18.487 E.07625 G1 X17.841 Y18.205 E.00992 G1 X17.386 Y17.628 E.02437 G1 X16.943 Y17.932 E.01781 G3 X15.948 Y16.989 I3.561 J-4.753 E.04555 G1 X15.661 Y16.215 E.02738 G1 X14.752 Y16.572 E.03238 G1 X15.278 Y16.894 E.02044 G1 X15.476 Y17.222 E.0127 G3 X14.997 Y18.487 I-2.317 J-.153 E.04552 G1 X16.626 Y18.487 E.05401 G1 X16.575 Y17.312 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X21.315 Y14.062 E.29428 G1 X21.315 Y13.516 E.02793 G1 X16.421 Y16.872 E.30382 G1 X16.321 Y16.762 E.0076 G1 X16.212 Y16.469 E.01599 G1 X20.419 Y13.585 E.26116 G1 X20.478 Y12.999 E.03016 G1 X16.051 Y16.034 E.27485 G1 X15.91 Y15.657 E.02062 G1 X15.665 Y15.753 E.01352 G1 X20.537 Y12.413 E.30248 G1 X20.571 Y12.076 E.01732 G1 X20.491 Y11.899 E.00997 G1 X14.532 Y15.984 E.36992 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.785 Y15.098 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F16200 M106 S255 G1 X14.713 Y15.147 E.00288 G1 X14.713 Y13.606 E.05114 G2 X15.476 Y11.981 I-1.779 J-1.826 E.06085 G1 X15.278 Y11.653 E.0127 G1 X14.713 Y11.307 E.02197 G1 X14.713 Y8.364 E.0976 G2 X15.476 Y6.739 I-1.779 J-1.826 E.06085 G1 X15.278 Y6.412 E.0127 G1 X14.713 Y6.066 E.02197 G1 X14.713 Y3.123 E.0976 G2 X15.476 Y1.498 I-1.779 J-1.826 E.06085 G2 X15.103 Y1.063 I-.608 J.144 E.01975 G1 X14.713 Y1.309 E.01528 G1 X14.713 Y2.477 E.03873 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.713 Y1.309 G1 X15.103 Y1.063 G1 X15.278 Y1.171 G1 X15.364 Y1.313 ;WIPE_END G1 X10.311 Y7.034 Z3.6 F30000 G1 X-2.945 Y22.045 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z3.6 F30000 G1 X-15.232 Y53.745 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.797 J-.745 E.28723 G3 X-15.232 Y52.255 I-.255 J1.93 E.06758 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z3.6 F30000 G1 X-5.6 Y52.94 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27029 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42919 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42919 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290581 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01243 G1 X-18.463 Y52.406 E.01246 G1 X-18.568 Y52.797 E.01244 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01243 G1 X-17.624 Y54.433 E.01246 G1 X-17.233 Y54.538 E.01244 G1 X-16.826 Y54.538 E.01249 G1 X-16.436 Y54.433 E.0124 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.657 E.01243 G1 X-16.592 Y51.517 E.01123 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.681 J.85 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.518 E.00941 G1 X-17.788 Y52.798 E.00947 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.512 Y53.627 E.00941 G1 X-17.233 Y53.757 E.00946 G1 X-16.926 Y53.784 E.00947 G1 X-16.637 Y53.678 E.00946 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.634 Y52.315 E.00902 G1 X-16.892 Y52.234 E.0083 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00653 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00648 G1 X-17.423 Y53.106 E.00647 G1 X-17.318 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00647 G1 X-16.924 Y53.393 E.0065 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01058 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y52.899 F30000 ;TYPE:Gap infill ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y52.95 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y52.899 F30000 G1 F12000 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-3.727 Y52.621 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01058 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.291 E.00652 G1 X-3.174 Y53.107 E.00652 G1 X-3.194 Y52.844 E.00811 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.0065 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.665 Y52.214 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00974 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.966 Y53.685 E.00901 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00945 G1 X-2.885 Y53.394 E.00947 G1 X-2.793 Y53.1 E.00946 G1 X-2.806 Y52.795 E.00938 G1 X-2.948 Y52.522 E.00947 G1 X-3.174 Y52.315 E.00941 G1 X-3.469 Y52.222 E.00949 G1 X-3.625 Y52.215 E.00481 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.706 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.219 J1.304 E.02865 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.1312 G1 X-3.666 Y51.836 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.672 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.0155 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.343 E.01243 G1 X-3.972 Y54.499 E.01246 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.774 E.01249 G1 X-2.071 Y53.402 E.0124 G1 X-2.019 Y52.999 E.01249 G1 X-2.071 Y52.598 E.0124 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.657 E.01243 G1 X-3.168 Y51.501 E.01246 G1 X-3.632 Y51.458 E.01431 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.657 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.519 ;WIPE_END G1 X-5.819 Y45.852 Z3.6 F30000 G1 X-35.102 Y-6.698 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23373 G1 X-42.148 Y-5.1 E.78942 G1 F2400 G1 X-42.148 Y-6 E.02985 G1 F600 G1 X-42.148 Y-6.2 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-42.148 Y-6.698 E.01652 G1 X-41 Y-6.698 E.03808 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-40.8 Y-6.698 E.00663 M106 S255 G1 F2400 G1 X-39.9 Y-6.698 E.02985 G1 F18000 G1 X-35.142 Y-6.698 E.15783 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-5.1 E.80292 G1 F2400 G1 X-42.555 Y-6 E.02985 G1 F600 G1 X-42.555 Y-6.2 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-42.555 Y-7.105 E.03002 G1 X-41 Y-7.105 E.05158 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-40.8 Y-7.105 E.00663 M106 S255 G1 F2400 G1 X-39.9 Y-7.105 E.02985 G1 F18000 G1 X-34.735 Y-7.105 E.17133 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-5.16 E.75896 G1 F2400 G1 X-42.99 Y-6 E.02581 G1 F600 G1 X-42.99 Y-6.2 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-42.99 Y-7.54 E.04445 G1 X-41 Y-7.54 E.06601 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-40.8 Y-7.54 E.00615 M106 S255 G1 F2400 G1 X-39.96 Y-7.54 E.02581 G1 F12000 G1 X-34.3 Y-7.54 E.17392 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.448 Y-2.673 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-36.754 Y-2.969 E.01412 G1 X-36.441 Y-3.292 E.01493 G3 X-37.135 Y-4.071 I1.133 J-1.71 E.035 G1 X-37.432 Y-4.253 E.01156 G1 X-38.784 Y-5.563 E.06244 G3 X-38.902 Y-6.487 I.814 J-.573 E.03216 G1 X-35.313 Y-6.487 E.11904 G1 X-35.313 Y-6.202 E.00946 G1 X-35.583 Y-6.036 E.01049 G2 X-36.355 Y-4.398 I1.782 J1.842 E.0614 G1 X-36.157 Y-4.071 E.0127 G1 X-35.313 Y-3.553 E.03285 G1 X-35.313 Y-1.925 E.05401 G1 X-35.752 Y1.344 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X-41.915 Y-4.636 E.43967 G1 X-41.278 Y-4.636 E.03262 G1 X-36.012 Y.465 E.37539 G1 X-36.015 Y.417 E.00247 G1 X-35.882 Y-.035 E.02413 G1 X-40.632 Y-4.636 E.3386 G1 X-39.985 Y-4.636 E.03311 G1 X-35.669 Y-.455 E.30765 G1 X-35.552 Y-.662 E.01217 G1 X-35.335 Y-.681 E.01116 G1 X-35.335 Y-.758 E.00391 G1 X-39.517 Y-4.809 E.29813 G1 X-39.436 Y-4.89 E.00583 G1 X-39.436 Y-5.358 E.02396 G1 X-37.021 Y-3.018 E.17217 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.68 Y-6.222 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 ;HEIGHT:0.2 G1 F1500 M106 S255 G1 X-40.8 Y-6.222 E.03441 G1 F600 G1 X-41.952 Y-6.222 E.0354 G1 X-41.952 Y-6 E.00682 G1 F1500 G1 X-41.952 Y-5.845 E.00476 G1 X-39.85 Y-5.845 E.06459 G1 X-39.85 Y-5.468 E.01158 G1 X-41.952 Y-5.468 E.06459 G1 X-41.952 Y-5.091 E.01158 G1 X-39.68 Y-5.091 E.06981 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.313 Y2.653 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 M106 S255 G1 X-35.313 Y4.281 E.05401 G1 X-35.583 Y4.446 E.01049 G2 X-36.355 Y6.084 I1.782 J1.842 E.0614 G1 X-36.157 Y6.412 E.0127 G1 X-35.313 Y6.93 E.03285 G1 X-35.313 Y9.522 E.086 G1 X-35.583 Y9.688 E.01049 G2 X-36.355 Y11.326 I1.782 J1.842 E.0614 G2 X-36.024 Y11.735 I.562 J-.116 E.01814 G1 X-36.569 Y12.361 E.02753 G1 X-36.92 Y11.452 E.03231 G1 X-37.565 Y10.763 E.0313 G1 X-37.92 Y11.172 E.01795 G1 X-38.203 Y10.998 E.01101 G3 X-38.976 Y9.36 I1.782 J-1.842 E.0614 G1 X-38.778 Y9.032 E.0127 G1 X-37.71 Y8.377 E.04156 G2 X-36.937 Y6.739 I-1.782 J-1.842 E.0614 G1 X-37.135 Y6.412 E.0127 G1 X-38.203 Y5.757 E.04156 G3 X-38.976 Y4.119 I1.782 J-1.842 E.0614 G1 X-38.778 Y3.791 E.0127 G1 X-37.71 Y3.136 E.04156 G2 X-36.937 Y1.498 I-1.782 J-1.842 E.0614 G1 X-37.135 Y1.171 E.0127 G1 X-38.203 Y.515 E.04156 G3 X-38.939 Y-.76 I1.495 J-1.712 E.04972 G1 X-39.717 Y-1.514 E.03597 G1 X-40.824 Y-.795 E.04377 M73 P54 R37 G2 X-41.597 Y.843 I1.782 J1.842 E.0614 G1 X-41.398 Y1.171 E.0127 G1 X-40.331 Y1.826 E.04156 G3 X-39.558 Y3.464 I-1.782 J1.842 E.0614 G1 X-39.756 Y3.791 E.0127 G1 X-40.824 Y4.446 E.04156 G2 X-41.597 Y6.084 I1.782 J1.842 E.0614 G1 X-41.398 Y6.412 E.0127 G1 X-40.331 Y7.067 E.04156 G3 X-39.558 Y8.705 I-1.782 J1.842 E.0614 G1 X-39.756 Y9.032 E.0127 G1 X-40.824 Y9.688 E.04156 G2 X-41.597 Y11.326 I1.782 J1.842 E.0614 G1 X-41.398 Y11.653 E.0127 G1 X-40.331 Y12.308 E.04156 G1 X-39.813 Y12.963 E.02769 G1 X-39.717 Y13.237 E.00961 G1 X-40.786 Y14.465 E.05401 G1 X-40.236 Y18.292 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X-35.335 Y12.66 E.3823 G1 X-35.335 Y11.974 E.0351 G1 X-40.358 Y17.747 E.39179 G2 X-40.668 Y17.418 I-1.001 J.634 E.02329 G1 X-36.794 Y12.966 E.30215 G1 X-36.978 Y12.492 E.02606 G1 X-41.002 Y17.117 E.31391 G3 X-41.286 Y16.757 I.511 J-.696 E.02373 G1 X-37.161 Y12.017 E.32175 G1 X-37.29 Y11.684 E.01826 G1 X-37.382 Y11.585 E.00693 G1 X-41.544 Y16.368 E.32458 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.751 Y15.246 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 ;HEIGHT:0.2 G1 F16200 M106 S255 G1 X-37.82 Y16.475 E.05401 G1 X-37.135 Y16.894 E.02663 G1 X-36.937 Y17.222 E.0127 G3 X-37.416 Y18.487 I-2.317 J-.153 E.04552 G1 X-35.313 Y18.487 E.06974 G1 X-35.313 Y17.412 E.03565 G1 X-36.157 Y16.894 E.03285 G1 X-36.355 Y16.567 E.0127 G3 X-35.583 Y14.929 I2.555 J.204 E.0614 G1 X-35.313 Y14.764 E.01049 G1 X-35.313 Y13.594 E.03879 G1 X-35.614 Y13.94 E.01522 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-35.313 Y13.594 G1 X-35.313 Y14.764 G1 X-35.583 Y14.929 G1 X-35.617 Y14.972 ;WIPE_END G1 X-36.744 Y7.424 Z3.6 F30000 G1 X-39.352 Y-10.052 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z3.6 F30000 G1 X-42.652 Y-23.367 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z3.6 F30000 G1 X-51.352 Y-52.052 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:3.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z3.8 I-.531 J1.095 P1 F30000 G1 X49.569 Y-1.672 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.602 Y-1.678 E.00113 G1 X50 Y-1.758 E.01346 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.529 Y-1.664 E.00683 G1 X49.654 Y-1.245 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.687 Y-1.252 E.00105 G1 X50 Y-1.314 E.0098 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.614 Y-1.237 E.00367 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.687 Y-1.252 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.227 Y-.436 ;WIPE_END G1 X50.415 Y-2.111 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00015 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50 Y-2.15 I-.815 J-1.989 E.25149 G1 X50.375 Y-2.115 E.01251 G1 X50.458 Y-2.544 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.47 Y-2.543 E.00038 G1 X50.991 Y-2.392 E.01665 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.418 Y-2.548 E.01291 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.47 Y-2.543 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.078 Y-1.529 ;WIPE_END G1 X49.11 Y-8.56 Z3.8 F30000 G1 X30.752 Y-52.052 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z3.8 F30000 G1 X18.752 Y-10.052 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X14.502 Y-6.698 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.619 Y-4.859 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X15.767 Y-3.454 I1.952 J2.146 E.05526 G1 X15.112 Y-2.495 E.03853 G1 X14.713 Y-2.203 E.01639 G1 X14.713 Y-4.56 E.07818 G2 X15.767 Y-4.687 I.442 J-.764 E.03776 G1 X16.422 Y-5.646 E.03853 G3 X18.06 Y-6.306 I1.589 J1.583 E.0602 G1 X18.387 Y-6.075 E.01329 G1 X18.846 Y-5.358 E.02824 G2 X17.293 Y-5.269 I-.639 J2.453 E.05245 G1 X18.522 Y-4.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.565731 G1 F14638.294 G1 X18.996 Y-4.471 E.02852 ;WIDTH:0.545284 G1 F15000 G1 X19.232 Y-4.206 E.01452 ;WIDTH:0.486876 G2 X20.2 Y-3.208 I9.126 J-7.892 E.05034 G1 X20.068 Y-3.759 E.02047 G1 X19.815 Y-4.208 E.01865 ;WIDTH:0.50439 G1 X19.628 Y-4.434 E.01103 ;WIDTH:0.545284 G1 X19.442 Y-4.661 E.01201 ;WIDTH:0.543343 G1 X19.516 Y-4.778 E.00565 ;WIDTH:0.498567 G1 X19.589 Y-4.896 E.00515 ;WIDTH:0.453791 G1 X19.663 Y-5.013 E.00464 ;WIDTH:0.421304 G1 X19.878 Y-5.05 E.00672 G1 X21.156 Y-5.05 E.03941 G1 X21.156 Y-6.306 E.03873 G1 X19.25 Y-6.306 E.05877 G3 X19.232 Y-5.101 I-15.965 J.361 E.03717 ;WIDTH:0.466369 G1 X19.173 Y-5.029 E.00321 ;WIDTH:0.506114 G1 X19.114 Y-4.957 E.00351 ;WIDTH:0.559545 G1 F14813.586 G1 X19.055 Y-4.885 E.00391 G1 X18.867 Y-4.86 E.00797 G1 X18.561 Y-4.935 E.01325 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.658 Y-5.414 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.482426 G1 F15000 G1 X19.878 Y-5.458 E.00803 G1 X20.748 Y-5.458 E.03115 G1 X20.748 Y-5.898 E.01574 G1 X19.658 Y-5.898 E.03902 G1 X19.658 Y-5.454 E.01589 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.637 Y-3.118 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X20.12 Y-4.512 I-2.394 J.097 E.05013 G2 X20.966 Y-4.658 I.314 J-.707 E.0302 G1 X21.337 Y-4.658 E.0123 G1 X21.336 Y-3.685 E.03226 G2 X20.558 Y-2.354 I.823 J1.374 E.05335 G3 X20.064 Y-1.425 I-2.267 J-.608 E.03519 G1 X20.362 Y-2.504 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.445138 G1 F15000 G1 X17.848 Y-5.018 E.11654 G1 X17.668 Y-4.982 E.00601 G1 X17.406 Y-4.892 E.00911 G1 X20.092 Y-2.206 E.1245 G1 X19.977 Y-1.973 E.00849 G1 X19.888 Y-1.84 E.00524 G1 X17.04 Y-4.688 E.132 G1 X16.73 Y-4.43 E.01324 G1 X19.63 Y-1.53 E.13441 G1 X19.45 Y-1.372 E.00784 G1 X19.311 Y-1.28 E.00547 G1 X16.48 Y-4.111 E.13125 G1 X16.287 Y-3.735 E.01385 G1 X18.935 Y-1.087 E.12275 G1 X18.731 Y-1.018 E.00708 G1 X18.484 Y-.969 E.00822 G1 X16.169 Y-3.284 E.10735 G1 X16.148 Y-3.001 E.00933 G1 X16.169 Y-2.716 E.00936 G1 X17.916 Y-.969 E.08098 G1 X17.668 Y-1.018 E.00827 G1 X17.414 Y-1.104 E.0088 G1 X17.173 Y-1.223 E.0088 G1 X16.951 Y-1.371 E.00876 G1 X16.137 Y-2.178 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.713 Y-.947 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y.681 E.05401 G2 X15.767 Y.554 I.442 J-.764 E.03776 G1 X16.422 Y-.405 E.03853 G1 X17.035 Y-.854 E.0252 G2 X18.532 Y-.578 I1.184 J-2.226 E.05132 G1 X19.043 Y.125 E.02883 G2 X20.68 Y.785 I1.589 J-1.583 E.0602 G2 X21.337 Y.073 I-.625 J-1.235 E.03283 G1 X21.337 Y1.556 E.04921 G1 X21.008 Y1.787 E.01333 G1 X20.353 Y2.746 E.03853 G3 X19.043 Y3.419 I-1.588 J-1.479 E.04985 G3 X18.387 Y3.175 I-.138 J-.63 E.02451 G1 X17.732 Y2.216 E.03853 G2 X16.422 Y1.543 I-1.588 J1.479 E.04985 G2 X15.767 Y1.787 I-.138 J.63 E.02451 G1 X15.112 Y2.746 E.03853 G1 X14.713 Y3.038 E.01639 G1 X14.713 Y5.922 E.09568 G2 X15.767 Y5.795 I.442 J-.764 E.03776 G1 X16.422 Y4.836 E.03853 G3 X17.732 Y4.163 I1.588 J1.479 E.04985 G3 X18.387 Y4.408 I.138 J.63 E.02451 G1 X19.043 Y5.367 E.03853 G2 X20.68 Y6.026 I1.589 J-1.583 E.0602 G2 X21.337 Y5.314 I-.625 J-1.235 E.03283 G1 X21.337 Y6.797 E.04921 G1 X21.008 Y7.028 E.01333 G1 X20.353 Y7.987 E.03853 G3 X19.043 Y8.66 I-1.588 J-1.479 E.04985 G3 X18.387 Y8.416 I-.138 J-.63 E.02451 G1 X17.732 Y7.457 E.03853 G2 X16.422 Y6.784 I-1.588 J1.479 E.04985 G2 X15.767 Y7.028 I-.138 J.63 E.02451 G1 X15.112 Y7.987 E.03853 G1 X14.713 Y8.279 E.01639 G1 X14.713 Y9.908 E.05401 G1 X17.704 Y12.838 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.445138 G1 F15000 G1 X20.218 Y15.352 E.11654 G1 X20.182 Y15.532 E.00601 G1 X20.092 Y15.794 E.00911 G1 X17.406 Y13.108 E.1245 G1 X17.173 Y13.223 E.00849 G1 X17.04 Y13.312 E.00524 G1 X19.888 Y16.16 E.132 G1 X19.63 Y16.47 E.01324 G1 X16.73 Y13.57 E.13441 G1 X16.572 Y13.75 E.00784 G1 X16.48 Y13.889 E.00547 G1 X19.311 Y16.72 E.13125 G1 X18.935 Y16.913 E.01385 G1 X16.287 Y14.265 E.12275 G1 X16.218 Y14.469 E.00708 G1 X16.169 Y14.716 E.00822 G1 X18.484 Y17.031 E.10735 G1 X18.201 Y17.052 E.00933 G1 X17.916 Y17.031 E.00936 G1 X16.169 Y15.284 E.08098 G1 X16.218 Y15.532 E.00827 G1 X16.304 Y15.786 E.0088 G1 X16.423 Y16.027 E.0088 G1 X16.571 Y16.249 E.00876 G1 X17.378 Y17.063 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.833 Y14.394 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X15.966 Y15.986 I2.339 J.607 E.05403 G3 X14.713 Y16.405 I-.812 J-.345 E.04952 G1 X14.713 Y18.487 E.06906 G1 X15.112 Y18.47 E.01323 G1 X15.767 Y17.511 E.03853 G3 X16.422 Y17.267 I.517 J.385 E.02451 G3 X18.106 Y18.487 I-.495 J2.455 E.07114 G1 X20.353 Y18.47 E.07453 G1 X21.008 Y17.511 E.03853 G1 X21.337 Y17.28 E.01333 G1 X21.337 Y15.797 E.04921 G3 X20.68 Y16.509 I-1.282 J-.522 E.03283 G3 X20.156 Y16.464 I-.196 J-.796 E.01777 G2 X20.072 Y13.434 I-1.965 J-1.462 E.10842 G1 X20.353 Y13.229 E.01154 G1 X21.008 Y12.27 E.03853 G1 X21.337 Y12.039 E.01333 G1 X21.337 Y10.555 E.04921 G3 X20.68 Y11.268 I-1.282 J-.522 E.03283 G3 X19.043 Y10.608 I-.049 J-2.243 E.0602 G1 X18.387 Y9.649 E.03853 G2 X17.732 Y9.405 I-.517 J.385 E.02451 G2 X16.422 Y10.078 I.277 J2.152 E.04985 G1 X15.767 Y11.037 E.03853 G3 X14.713 Y11.164 I-.611 J-.637 E.03776 G1 X14.713 Y13.521 E.07818 G1 X15.112 Y13.229 E.01639 G1 X15.767 Y12.27 E.03853 G3 X16.422 Y12.025 I.517 J.385 E.02451 G3 X17.632 Y12.625 I-.226 J1.977 E.04572 G3 X19.222 Y12.783 I.572 J2.319 E.05402 G1 X18.384 Y12.992 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.462609 G1 F15000 G2 X19.625 Y14.233 I805.729 J-805.157 E.06003 G1 X20.206 Y14.813 E.02808 G1 X20.154 Y14.455 E.01239 G1 X19.955 Y13.98 E.01762 G1 X19.62 Y13.571 E.01806 G1 X19.232 Y13.255 E.01713 G1 X18.733 Y13.042 E.01856 G1 X18.423 Y12.998 E.01069 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X18.733 Y13.042 G1 X19.232 Y13.255 G1 X19.62 Y13.571 G1 X19.955 Y13.98 G1 X20 Y14.086 ;WIPE_END G1 X12.789 Y16.588 Z3.8 F30000 G1 X-2.945 Y22.045 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z3.8 F30000 G1 X-15.232 Y53.745 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.797 J-.745 E.28721 G3 X-15.232 Y52.255 I-.256 J1.932 E.06758 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z3.8 F30000 G1 X-5.6 Y52.94 Z3.8 M73 P54 R36 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.255 J1.928 E.27018 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42911 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42893 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48894 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.29059 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.798 E.01245 G1 X-18.568 Y53.201 E.01241 G1 X-18.463 Y53.594 E.01248 G1 X-18.261 Y53.945 E.01244 G1 X-17.975 Y54.231 E.01244 G1 X-17.62 Y54.435 E.01259 G1 X-17.233 Y54.538 E.01231 G1 X-16.828 Y54.538 E.01245 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.936 Y51.9 E.01249 G1 X-16.253 Y51.657 E.01227 G1 X-16.592 Y51.517 E.01126 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.021 Y52.407 E.01977 G1 X-16.316 Y52.084 E.01344 G2 X-16.842 Y51.859 I-.678 J.856 E.01779 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00947 G1 X-17.814 Y53.102 E.00939 G1 X-17.709 Y53.393 E.0095 G1 X-17.512 Y53.627 E.00939 G1 X-17.232 Y53.758 E.00952 G1 X-16.927 Y53.784 E.0094 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.418 Y52.51 E.01697 G1 X-16.634 Y52.316 E.00892 G1 X-16.892 Y52.234 E.00832 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00652 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.318 Y53.287 E.00642 G1 X-17.134 Y53.394 E.00654 G1 X-16.924 Y53.393 E.00648 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.742 Y52.708 E.01066 G1 X-16.889 Y52.623 E.00522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01058 G1 X-3.676 Y53.397 E.00654 G1 X-3.464 Y53.397 E.00652 G1 X-3.28 Y53.29 E.00653 G1 X-3.174 Y53.107 E.00649 G1 X-3.194 Y52.844 E.00813 G1 X-3.322 Y52.677 E.00645 G1 X-3.518 Y52.596 E.00652 G1 X-3.687 Y52.616 E.00524 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.966 Y53.684 E.009 G1 X-3.671 Y53.778 E.00952 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.792 Y53.097 E.0096 G1 X-2.806 Y52.796 E.00927 G1 X-2.948 Y52.522 E.00948 G1 X-3.174 Y52.316 E.00939 G1 X-3.469 Y52.222 E.00951 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13116 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.347 Y54.343 E.01241 G1 X-3.972 Y54.499 E.01248 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01244 G1 X-2.019 Y52.996 E.01259 G1 X-2.071 Y52.599 E.01231 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.793 Y51.657 E.01241 G1 X-3.168 Y51.501 E.01248 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.793 Y51.657 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-5.819 Y45.853 Z3.8 F30000 G1 X-35.102 Y-6.698 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-37.317 Y-4.943 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-38.813 Y-5.444 I-1.51 J2.023 E.05326 G1 X-39.267 Y-6.075 E.02577 G3 X-39.458 Y-6.487 I.05 J-.273 E.01762 G1 X-35.313 Y-6.487 E.13748 G1 X-35.313 Y-6.133 E.01173 G1 X-35.991 Y-5.646 E.02769 G1 X-36.646 Y-4.687 E.03853 G1 X-36.886 Y-4.518 E.00973 G3 X-36.435 Y-3.62 I-2.119 J1.625 E.03355 G1 X-36.319 Y-3.685 E.00444 G3 X-35.336 Y-3.506 I.227 J1.539 E.03374 G1 X-35.313 Y-.892 E.08671 G1 X-35.991 Y-.405 E.02769 G1 X-36.646 Y.554 E.03853 G1 X-36.974 Y.785 E.01329 G3 X-39.089 Y-.574 I-.04 J-2.264 E.08842 G3 X-40.195 Y-.998 I.323 J-2.496 E.03965 G1 X-40.577 Y-.885 E.01322 G1 X-41.232 Y-.405 E.02694 G1 X-41.937 Y.589 E.04041 G1 X-41.937 Y1.859 E.04214 G3 X-41.56 Y1.556 I.594 J.353 E.01639 G3 X-39.922 Y2.216 I.049 J2.243 E.0602 G1 X-39.267 Y3.175 E.03853 G1 X-38.939 Y3.406 E.01329 G2 X-37.301 Y2.746 I.049 J-2.243 E.0602 G1 X-36.646 Y1.787 E.03853 G1 X-36.319 Y1.556 E.01329 G3 X-35.336 Y1.735 I.227 J1.539 E.03374 G1 X-35.313 Y4.349 E.08671 G1 X-35.991 Y4.836 E.02769 G1 X-36.646 Y5.795 E.03853 G1 X-36.974 Y6.026 E.01329 G3 X-38.612 Y5.367 I-.049 J-2.243 E.0602 G1 X-39.267 Y4.408 E.03853 G1 X-39.595 Y4.177 E.01329 G2 X-41.232 Y4.836 I-.049 J2.243 E.0602 G1 X-41.937 Y5.83 E.04041 G1 X-41.937 Y7.1 E.04214 G3 X-41.56 Y6.797 I.594 J.353 E.01639 G3 X-39.922 Y7.457 I.049 J2.243 E.0602 G1 X-39.267 Y8.416 E.03853 G1 X-38.939 Y8.647 E.01329 G2 X-37.301 Y7.987 I.049 J-2.243 E.0602 G1 X-36.646 Y7.028 E.03853 G1 X-36.319 Y6.797 E.01329 G3 X-35.336 Y6.977 I.227 J1.539 E.03374 G1 X-35.313 Y9.591 E.08671 G1 X-35.991 Y10.078 E.02769 G1 X-36.646 Y11.037 E.03853 G1 X-36.974 Y11.268 E.01329 G3 X-38.612 Y10.608 I-.049 J-2.243 E.0602 G1 X-39.267 Y9.649 E.03853 G1 X-39.595 Y9.418 E.01329 G2 X-41.232 Y10.078 I-.049 J2.243 E.0602 G1 X-41.937 Y11.071 E.04041 G1 X-41.937 Y12.342 E.04214 G3 X-41.56 Y12.039 I.594 J.353 E.01639 G3 X-39.922 Y12.698 I.049 J2.243 E.0602 G1 X-39.853 Y12.799 E.00404 G3 X-37.233 Y13.129 I1.057 J2.177 E.09266 G1 X-36.646 Y12.27 E.03451 G1 X-36.319 Y12.039 E.01329 G3 X-35.336 Y12.218 I.227 J1.539 E.03374 G1 X-35.313 Y14.832 E.08671 G1 X-35.991 Y15.319 E.02769 G1 X-36.646 Y16.278 E.03853 G1 X-36.784 Y16.375 E.00561 G3 X-41.224 Y15.313 I-2.017 J-1.38 E.19544 G1 X-41.937 Y16.313 E.04073 G1 X-41.937 Y17.583 E.04214 G3 X-41.56 Y17.28 I.594 J.353 E.01639 G3 X-39.548 Y18.487 I.102 J2.11 E.08251 G1 X-37.325 Y18.487 E.07376 G1 X-36.646 Y17.511 E.03943 G1 X-36.319 Y17.28 E.01329 G3 X-35.336 Y17.459 I.227 J1.539 E.03374 G1 X-35.313 Y18.487 E.03409 G1 X-35.931 Y18.487 E.02049 G1 X-37.045 Y13.98 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.462594 G1 F15000 G1 X-37.38 Y13.571 E.01807 G1 X-37.768 Y13.255 E.01713 G1 X-38.267 Y13.042 E.01856 G1 X-38.616 Y12.992 E.01205 G2 X-37.375 Y14.233 I808.025 J-807.452 E.06003 G1 X-36.794 Y14.814 E.02807 G1 X-36.846 Y14.455 E.01239 G1 X-37.029 Y14.016 E.01625 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.296 Y12.838 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445138 G1 F15000 G1 X-36.782 Y15.352 E.11654 G1 X-36.818 Y15.532 E.00601 G1 X-36.908 Y15.794 E.00911 G1 X-39.594 Y13.108 E.1245 G1 X-39.827 Y13.223 E.00849 G1 X-39.96 Y13.312 E.00524 G1 X-37.112 Y16.16 E.132 G1 X-37.37 Y16.47 E.01324 G1 X-40.27 Y13.57 E.13441 G1 X-40.428 Y13.75 E.00784 G1 X-40.52 Y13.889 E.00547 G1 X-37.689 Y16.72 E.13125 G1 X-38.065 Y16.913 E.01385 G1 X-40.713 Y14.265 E.12275 G1 X-40.782 Y14.469 E.00708 G1 X-40.831 Y14.716 E.00822 G1 X-38.516 Y17.031 E.10735 G1 X-38.799 Y17.052 E.00933 G1 X-39.084 Y17.031 E.00936 G1 X-40.831 Y15.284 E.08098 G1 X-40.782 Y15.532 E.00827 G1 X-40.696 Y15.786 E.0088 G1 X-40.578 Y16.026 E.00876 G1 X-40.429 Y16.249 E.0088 G1 X-39.622 Y17.063 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.937 Y-1.754 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-3.382 E.05401 G3 X-41.148 Y-3.674 I.574 J.339 E.03019 G3 X-40.592 Y-4.658 I2.266 J.632 E.03787 G1 X-41.079 Y-4.658 E.01616 G1 X-39.85 Y-5.336 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-39.85 Y-6.306 E.02981 G1 X-41.756 Y-6.306 E.05857 G1 X-41.756 Y-5.05 E.0386 G1 X-40.56 Y-5.05 E.03674 G1 X-40.513 Y-5.261 E.00665 G1 X-40.33 Y-5.326 E.00598 G1 X-39.89 Y-5.335 E.01352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.189 Y-5.668 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.344605 G1 F15000 G1 X-40.189 Y-5.966 E.00734 ;WIDTH:0.367575 G1 X-40.454 Y-5.943 E.00703 ;WIDTH:0.413515 G1 X-40.718 Y-5.921 E.00802 ;WIDTH:0.478727 G3 X-41.348 Y-5.898 I-.447 J-3.613 E.02239 G1 X-41.348 Y-5.458 E.01561 G1 X-40.846 Y-5.458 E.0178 G1 X-40.819 Y-5.532 E.00281 ;WIDTH:0.459537 G1 X-40.673 Y-5.576 E.00515 ;WIDTH:0.41376 G1 X-40.528 Y-5.62 E.00458 ;WIDTH:0.3678 G3 X-40.229 Y-5.667 I.233 J.507 E.00812 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.296 Y-5.162 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445138 G1 F15000 G1 X-36.782 Y-2.648 E.11654 G1 X-36.818 Y-2.468 E.00601 G1 X-36.908 Y-2.206 E.0091 G1 X-39.706 Y-5.003 E.12968 G2 X-40.22 Y-4.991 I-.166 J3.983 E.01687 G2 X-40.214 Y-4.942 I.064 J.016 E.00168 G1 X-37.112 Y-1.84 E.14377 G1 X-37.37 Y-1.53 E.01324 G1 X-40.27 Y-4.43 E.13441 G1 X-40.428 Y-4.25 E.00784 G1 X-40.52 Y-4.111 E.00547 G1 X-37.689 Y-1.28 E.13125 G1 X-38.065 Y-1.087 E.01385 G1 X-40.713 Y-3.735 E.12275 G1 X-40.782 Y-3.531 E.00708 G1 X-40.831 Y-3.284 E.00822 G1 X-38.516 Y-.969 E.10735 G1 X-38.799 Y-.948 E.00933 G1 X-39.084 Y-.969 E.00936 G1 X-40.831 Y-2.716 E.08098 G1 X-40.782 Y-2.468 E.00827 G1 X-40.696 Y-2.214 E.0088 G1 X-40.577 Y-1.973 E.0088 G1 X-40.429 Y-1.751 E.00876 G1 X-39.622 Y-.937 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.794 Y-3.187 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.462598 G1 F15000 G1 X-36.846 Y-3.545 E.01239 G1 X-37.045 Y-4.02 E.01762 G1 X-37.38 Y-4.429 E.01806 G1 X-37.768 Y-4.745 E.01713 G1 X-38.267 Y-4.958 E.01856 G1 X-38.616 Y-5.008 E.01205 G2 X-37.375 Y-3.767 I807.19 J-806.617 E.06003 G1 X-36.822 Y-3.215 E.02671 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-37.375 Y-3.767 G1 X-38.237 Y-4.629 ;WIPE_END G1 X-39.352 Y-10.052 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z3.8 F30000 G1 X-42.652 Y-23.367 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z3.8 F30000 G1 X-51.352 Y-52.052 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:3.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4 I-.531 J1.095 P1 F30000 G1 X49.58 Y-1.674 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.615 Y-1.681 E.0012 G1 X50 Y-1.758 E.01302 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.54 Y-1.666 E.0072 G1 X49.664 Y-1.247 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.7 Y-1.254 E.00111 G1 X50 Y-1.314 E.0094 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.625 Y-1.24 E.00401 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.7 Y-1.254 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.23 Y-.425 ;WIPE_END G1 X50.413 Y-2.111 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00022 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50 Y-2.15 I-.815 J-1.989 E.25149 G1 X50.373 Y-2.115 E.01244 G1 X50.456 Y-2.544 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.467 Y-2.543 E.00034 G1 X50.991 Y-2.392 E.01675 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.416 Y-2.548 E.01284 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.467 Y-2.543 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.077 Y-1.53 ;WIPE_END G1 X49.109 Y-8.562 Z4 F30000 G1 X30.752 Y-52.052 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z4 F30000 G1 X18.752 Y-10.052 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X14.502 Y-6.698 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.356 Y-4.598 Z4 F30000 G1 Z3.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X16.321 Y-4.557 E.00181 G2 X15.762 Y-3.117 I1.898 J1.564 E.05214 G1 X15.112 Y-2.413 E.0318 G1 X14.713 Y-2.205 E.0149 G1 X14.713 Y-4.671 E.08178 G2 X15.767 Y-5.02 I.241 J-1.036 E.03874 G1 X16.422 Y-5.729 E.03201 G3 X18.06 Y-6.014 I1.09 J1.411 E.05738 G3 X18.718 Y-5.385 I-2.067 J2.819 E.03028 G3 X18.858 Y-5.353 I-.104 J.795 E.00477 G1 X18.858 Y-6.487 E.0376 G1 X18.507 Y-6.487 E.01165 G1 X19.862 Y-5.165 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X19.926 Y-5.05 E.00405 G1 X21.156 Y-5.05 E.03778 G1 X21.156 Y-6.306 E.0386 G1 X21.003 Y-6.306 E.00469 G1 X19.89 Y-5.193 E.04837 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.771 Y-5.511 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.491024 G1 F15000 G2 X20.779 Y-5.428 I-.027 J.045 E.00835 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.972 Y-4.658 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-4.658 E.0121 G1 X21.337 Y-3.394 E.04192 G2 X20.622 Y-2.668 I1.94 J2.625 E.03395 G3 X19.927 Y-1.27 I-2.515 J-.379 E.05261 G1 X18.408 Y-.999 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.483083 G1 F15000 G1 X18.983 Y-1.144 E.02127 G1 X19.434 Y-1.402 E.01862 G1 X19.804 Y-1.774 E.01882 G1 X20.068 Y-2.233 E.019 G1 X20.202 Y-2.742 E.01889 G1 X20.202 Y-2.794 E.00185 G1 X18.436 Y-1.028 E.08958 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.362 Y-3.496 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445138 G1 F15000 G1 X17.848 Y-.982 E.11654 G1 X17.668 Y-1.018 E.00601 G1 X17.406 Y-1.108 E.00911 G1 X20.092 Y-3.794 E.1245 G1 X19.978 Y-4.026 E.00845 G1 X19.888 Y-4.16 E.00529 G1 X17.04 Y-1.312 E.132 G1 X16.73 Y-1.57 E.01324 G1 X19.631 Y-4.471 E.13447 G1 X19.481 Y-4.621 E.00696 G1 X19.596 Y-4.9 E.00987 G2 X19.569 Y-4.978 I-.067 J-.021 E.00291 G1 X16.48 Y-1.889 E.14319 G1 X16.287 Y-2.265 E.01385 G1 X20.524 Y-6.502 E.19639 G1 X19.955 Y-6.502 E.01864 G1 X19.25 Y-5.797 E.03269 G1 X19.25 Y-6.366 E.01864 G1 X19.556 Y-6.672 E.01419 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.629 Y-5.176 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X16.169 Y-2.716 E.11403 G1 X16.148 Y-2.999 E.00933 G1 X16.169 Y-3.284 E.00936 G1 X17.916 Y-5.031 E.08098 G1 X17.671 Y-4.983 E.00819 G1 X17.414 Y-4.896 E.00888 G1 X17.174 Y-4.778 E.00876 G1 X16.951 Y-4.629 E.0088 G1 X16.137 Y-3.822 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.713 Y-1.058 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y.571 E.05401 G2 X15.439 Y.493 I.274 J-.877 E.02491 G2 X16.422 Y-.487 I-3.243 J-4.232 E.04619 G1 X17.077 Y-.829 E.0245 G2 X18.313 Y-.562 I1.13 J-2.243 E.0424 G3 X19.043 Y.208 I-2.567 J3.162 E.03528 G2 X20.353 Y.604 I1.128 J-1.366 E.04662 G2 X21.337 Y-.135 I-.626 J-1.858 E.04151 G1 X21.337 Y1.847 E.06575 G2 X20.353 Y2.828 I3.978 J4.974 E.04619 G3 X19.043 Y3.224 I-1.128 J-1.366 E.04662 G1 X18.715 Y3.114 E.01147 G3 X17.732 Y2.133 I3.243 J-4.232 E.04619 G2 X16.422 Y1.737 I-1.128 J1.366 E.04662 G1 X16.094 Y1.848 E.01147 G2 X15.112 Y2.828 I3.243 J4.232 E.04619 G1 X14.713 Y3.036 E.0149 G1 X14.713 Y5.812 E.09208 G2 X15.439 Y5.735 I.274 J-.877 E.02491 G2 X16.422 Y4.754 I-3.243 J-4.232 E.04619 G3 X17.732 Y4.358 I1.128 J1.366 E.04662 G1 X18.06 Y4.468 E.01147 G3 X19.043 Y5.449 I-3.243 J4.232 E.04619 G2 X20.353 Y5.845 I1.128 J-1.366 E.04662 G2 X21.337 Y5.107 I-.626 J-1.858 E.04151 G1 X21.337 Y7.089 E.06575 G2 X20.353 Y8.07 I3.978 J4.973 E.04619 G3 X19.043 Y8.466 I-1.128 J-1.366 E.04662 G1 X18.715 Y8.355 E.01147 G3 X17.732 Y7.375 I3.243 J-4.232 E.04619 G2 X16.422 Y6.979 I-1.128 J1.366 E.04662 G1 X16.094 Y7.089 E.01147 G2 X15.112 Y8.07 I3.243 J4.232 E.04619 G1 X14.713 Y8.277 E.0149 G1 X14.713 Y9.906 E.05401 G1 X15.892 Y14.208 F30000 G1 F16200 G2 X15.797 Y15.426 I2.343 J.796 E.04094 G2 X15.896 Y15.805 I1.595 J-.217 E.01301 G3 X15.112 Y16.328 I-1.269 J-1.053 E.03173 G1 X14.713 Y16.294 E.01326 G1 X14.713 Y18.487 E.07273 G1 X15.172 Y18.487 E.01523 G3 X16.094 Y17.572 I3.946 J3.053 E.04322 G1 X16.422 Y17.461 E.01147 G3 X17.732 Y17.857 I.183 J1.762 E.04662 G1 X18.315 Y18.487 E.02846 G1 X20.413 Y18.487 E.06962 G3 X21.337 Y17.571 I4.709 J3.825 E.04322 G1 X21.337 Y15.589 E.06575 G3 X20.353 Y16.328 I-1.61 J-1.12 E.04151 G1 X20.272 Y16.291 E.00295 G2 X20.086 Y13.45 I-2.083 J-1.29 E.10076 G1 X20.353 Y13.311 E.00998 G3 X21.337 Y12.33 I4.962 J3.992 E.04619 G1 X21.337 Y10.348 E.06575 G3 X20.353 Y11.086 I-1.61 J-1.12 E.04151 G3 X19.043 Y10.69 I-.183 J-1.762 E.04662 G2 X18.06 Y9.71 I-4.225 J3.251 E.04619 G1 X17.732 Y9.599 E.01147 G2 X16.422 Y9.995 I-.183 J1.762 E.04662 G3 X15.439 Y10.976 I-4.225 J-3.251 E.04619 G3 X14.713 Y11.053 I-.452 J-.799 E.02491 G1 X14.713 Y13.519 E.08178 G1 X15.112 Y13.311 E.0149 G3 X16.094 Y12.33 I4.225 J3.251 E.04619 G1 X16.422 Y12.22 E.01147 G3 X17.718 Y12.608 I.184 J1.74 E.04607 G3 X17.97 Y12.57 I.291 J1.067 E.0085 G3 X18.634 Y12.599 I.224 J2.502 E.02211 G3 X19.3 Y12.822 I-.443 J2.423 E.02335 G1 X18.408 Y17.001 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.482922 G1 F15000 G1 X18.958 Y16.868 E.0203 G1 X19.409 Y16.612 E.01858 G1 X19.785 Y16.245 E.01886 G1 X20.057 Y15.785 E.01917 G1 X20.202 Y15.261 E.0195 G1 X20.202 Y15.206 E.00196 G1 X19.474 Y15.934 E.03693 G3 X18.436 Y16.973 I-1376.513 J-1374.81 E.05263 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.704 Y17.162 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445138 G1 F15000 G1 X20.218 Y14.648 E.11654 G1 X20.182 Y14.468 E.00601 G1 X20.092 Y14.206 E.00911 G1 X17.406 Y16.892 E.1245 G1 X17.173 Y16.777 E.00849 G1 X17.04 Y16.688 E.00524 G1 X19.888 Y13.84 E.132 G1 X19.63 Y13.53 E.01324 G1 X16.73 Y16.43 E.13441 G1 X16.572 Y16.25 E.00784 G1 X16.48 Y16.111 E.00547 G1 X19.311 Y13.28 E.13125 G1 X18.935 Y13.087 E.01385 G1 X16.287 Y15.735 E.12275 G1 X16.218 Y15.531 E.00708 G1 X16.169 Y15.284 E.00822 G1 X18.484 Y12.969 E.10735 G1 X18.201 Y12.948 E.00933 G1 X17.916 Y12.969 E.00936 G1 X16.169 Y14.716 E.08098 G1 X16.218 Y14.468 E.00827 G1 X16.304 Y14.214 E.0088 G1 X16.423 Y13.973 E.0088 G1 X16.571 Y13.751 E.00876 G1 X17.378 Y12.937 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X16.571 Y13.751 G1 X16.423 Y13.973 G1 X16.304 Y14.214 G1 X16.218 Y14.468 G1 X16.208 Y14.517 ;WIPE_END G1 X9.105 Y17.309 Z4 F30000 G1 X-2.945 Y22.045 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z4 F30000 G1 X-15.232 Y53.745 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.797 J-.745 E.28718 G3 X-15.232 Y52.255 I-.257 J1.933 E.06757 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z4 F30000 G1 X-5.6 Y52.94 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.928 E.27007 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42903 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42903 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48893 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48893 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.29059 G1 X-14.79 Y52.849 E.00235 G1 X-16.629 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.26 Y52.054 E.01239 G1 X-18.463 Y52.406 E.01251 G1 X-18.568 Y52.797 E.01244 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.976 Y54.23 E.01239 G1 X-17.624 Y54.433 E.0125 G1 X-17.232 Y54.538 E.01244 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.253 Y51.657 E.01239 G1 X-16.592 Y51.517 E.01128 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.682 J.854 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.322 E.00979 G1 X-17.656 Y52.517 E.00936 G1 X-17.788 Y52.798 E.0095 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00947 G1 X-17.513 Y53.626 E.00937 G1 X-17.232 Y53.758 E.00951 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.633 Y52.316 E.00898 G1 X-16.892 Y52.234 E.00833 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00652 G1 X-17.318 Y52.712 E.00643 G1 X-17.423 Y52.895 E.0065 G1 X-17.423 Y53.106 E.00647 G1 X-17.318 Y53.287 E.00644 G1 X-17.135 Y53.393 E.00651 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01058 G1 X-16.89 Y52.623 E.00531 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y52.899 F30000 ;TYPE:Gap infill ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y52.95 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y52.899 F30000 G1 F12000 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-3.539 Y52.953 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.471094 G1 F15000 G2 X-3.532 Y53.034 I-.025 J.043 E.00756 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.727 Y52.621 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.856 Y53.294 E.01072 G1 X-3.676 Y53.397 E.00639 G1 X-3.464 Y53.397 E.00651 G1 X-3.281 Y53.292 E.00646 G1 X-3.174 Y53.107 E.00657 G1 X-3.193 Y52.846 E.00806 G1 X-3.323 Y52.676 E.00656 G1 X-3.518 Y52.596 E.00647 G1 X-3.687 Y52.616 E.00524 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.246 Y53.407 E.01387 G1 X-4.044 Y53.625 E.00914 G1 X-3.774 Y53.764 E.00932 G1 X-3.466 Y53.777 E.00947 G1 X-3.175 Y53.685 E.00941 G1 X-2.943 Y53.47 E.00971 G1 X-2.806 Y53.205 E.00915 G1 X-2.806 Y52.795 E.0126 G1 X-2.955 Y52.515 E.00974 G1 X-3.173 Y52.316 E.00908 G1 X-3.469 Y52.222 E.00954 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.579 Y53.592 E.01976 G1 X-4.281 Y53.918 E.01356 G2 X-3.42 Y51.849 I.709 J-.919 E.13081 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02564 G1 X-4.661 Y54.102 E.01258 G1 X-4.347 Y54.343 E.01215 G1 X-3.971 Y54.499 E.01251 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.223 Y53.769 E.01268 G1 X-2.071 Y53.402 E.01221 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.225 E.01244 G1 X-2.479 Y51.898 E.01268 G1 X-2.793 Y51.657 E.01215 G1 X-3.169 Y51.501 E.01251 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.169 Y51.501 G1 X-2.793 Y51.657 G1 X-2.479 Y51.898 G1 X-2.226 Y52.225 G1 X-2.104 Y52.52 ;WIPE_END G1 X-5.819 Y45.853 Z4 F30000 G1 X-35.102 Y-6.698 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-37.438 Y-5.025 Z4 F30000 G1 Z3.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-38.813 Y-5.444 I-1.388 J2.086 E.04837 G1 X-38.982 Y-5.433 E.00559 G2 X-39.458 Y-5.9 I-2.016 J1.579 E.02219 G1 X-39.458 Y-6.487 E.01946 G1 X-35.313 Y-6.487 E.13748 G1 X-35.313 Y-6.072 E.01377 G1 X-35.991 Y-5.729 E.02521 G3 X-37.062 Y-4.718 I-2.816 J-1.912 E.04922 G3 X-36.38 Y-3.342 I-1.813 J1.755 E.05176 G3 X-35.991 Y-3.504 I.404 J.423 E.0143 G1 X-35.313 Y-3.437 E.0226 G1 X-35.313 Y-.831 E.08647 G1 X-35.991 Y-.487 E.02521 G3 X-36.974 Y.493 I-4.225 J-3.251 E.04619 G3 X-38.612 Y.208 I-.548 J-1.697 E.05738 G1 X-39.267 Y-.5 E.03201 G2 X-39.84 Y-.792 I-.947 J1.15 E.0215 G1 X-40.01 Y-.876 E.00628 G1 X-40.577 Y-.829 E.01889 G1 X-41.232 Y-.487 E.0245 G3 X-41.937 Y.262 I-3.205 J-2.307 E.03421 G1 X-41.937 Y2.173 E.06341 G3 X-41.56 Y1.848 I1.428 J1.272 E.01657 G3 X-39.922 Y2.133 I.548 J1.697 E.05738 G2 X-38.939 Y3.114 I4.225 J-3.251 E.04619 G2 X-37.301 Y2.828 I.548 J-1.697 E.05738 G1 X-36.646 Y2.12 E.03201 G3 X-35.991 Y1.737 I.824 J.657 E.02575 G1 X-35.313 Y1.804 E.0226 G1 X-35.313 Y4.411 E.08647 G1 X-35.991 Y4.754 E.02521 G3 X-36.974 Y5.735 I-4.225 J-3.251 E.04619 G3 X-38.612 Y5.449 I-.548 J-1.697 E.05738 G2 X-39.595 Y4.468 I-4.225 J3.251 E.04619 G2 X-41.232 Y4.754 I-.548 J1.697 E.05738 G3 X-41.937 Y5.503 I-3.205 J-2.307 E.03421 G1 X-41.937 Y7.415 E.06341 G3 X-41.56 Y7.089 I1.428 J1.272 E.01657 G3 X-39.922 Y7.375 I.548 J1.697 E.05738 G2 X-38.939 Y8.355 I4.225 J-3.251 E.04619 G2 X-37.301 Y8.07 I.548 J-1.697 E.05738 G1 X-36.646 Y7.362 E.03201 G3 X-35.991 Y6.979 I.824 J.657 E.02575 G1 X-35.313 Y7.045 E.0226 G1 X-35.313 Y9.652 E.08647 G1 X-35.991 Y9.995 E.02521 G3 X-36.974 Y10.976 I-4.225 J-3.251 E.04619 G3 X-38.612 Y10.69 I-.548 J-1.697 E.05738 G2 X-39.595 Y9.71 I-4.225 J3.251 E.04619 G2 X-41.232 Y9.995 I-.548 J1.697 E.05738 G3 X-41.937 Y10.744 I-3.205 J-2.307 E.03421 G1 X-41.937 Y12.656 E.06341 G3 X-41.56 Y12.33 I1.428 J1.272 E.01657 M73 P55 R36 G3 X-39.922 Y12.616 I.548 J1.697 E.05738 G1 X-39.784 Y12.765 E.00673 G3 X-37.178 Y13.177 I.981 J2.24 E.09246 G1 X-36.646 Y12.603 E.02596 G3 X-35.991 Y12.22 I.824 J.657 E.02575 G1 X-35.313 Y12.287 E.0226 G1 X-35.313 Y14.893 E.08647 G2 X-36.485 Y15.77 I1.121 J2.719 E.04905 G3 X-41.23 Y15.235 I-2.316 J-.771 E.2205 G3 X-41.937 Y15.986 I-28.806 J-26.426 E.03421 G1 X-41.937 Y17.897 E.06341 G3 X-41.232 Y17.461 I1.167 J1.098 E.0278 G1 X-40.577 Y17.516 E.02181 G3 X-39.34 Y18.487 I-.736 J2.212 E.05323 G1 X-37.241 Y18.487 E.06962 G1 X-36.646 Y17.844 E.02905 G3 X-35.991 Y17.461 I.824 J.657 E.02575 G1 X-35.313 Y17.528 E.0226 G1 X-35.313 Y18.487 E.03181 G1 X-35.982 Y18.487 E.0222 G1 X-36.798 Y15.206 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.482929 G1 F15000 G1 X-38.592 Y17.001 E.091 G1 X-38.042 Y16.868 E.0203 G1 X-37.591 Y16.612 E.01858 G1 X-37.215 Y16.245 E.01886 G1 X-36.943 Y15.785 E.01917 G1 X-36.798 Y15.246 E.02 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.638 Y14.504 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445138 G1 F15000 G1 X-39.152 Y17.018 E.11654 G1 X-39.332 Y16.982 E.00601 G1 X-39.594 Y16.892 E.00911 G1 X-36.908 Y14.206 E.1245 G1 X-37.023 Y13.973 E.00849 G1 X-37.112 Y13.84 E.00525 G1 X-39.96 Y16.688 E.132 G1 X-40.27 Y16.43 E.01324 G1 X-37.37 Y13.53 E.13441 G1 X-37.55 Y13.372 E.00784 G1 X-37.689 Y13.28 E.00547 G1 X-40.52 Y16.111 E.13125 G1 X-40.713 Y15.735 E.01385 G1 X-38.065 Y13.087 E.12275 G1 X-38.269 Y13.018 E.00708 G1 X-38.516 Y12.969 E.00822 G1 X-40.831 Y15.284 E.10735 G1 X-40.852 Y15.001 E.00933 G1 X-40.831 Y14.716 E.00936 G1 X-39.084 Y12.969 E.08098 G1 X-39.329 Y13.017 E.00819 G1 X-39.586 Y13.104 E.00888 G1 X-39.827 Y13.223 E.0088 G1 X-40.049 Y13.371 E.00876 G1 X-40.863 Y14.178 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.937 Y-1.44 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-3.068 E.05401 G3 X-41.188 Y-3.5 I1.011 J.886 E.0292 G3 X-40.592 Y-4.658 I2.422 J.516 E.04371 G1 X-40.901 Y-4.658 E.01025 G1 X-40.258 Y-5.414 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.482426 G1 F15000 G1 X-40.258 Y-5.898 E.01732 G1 X-41.348 Y-5.898 E.03902 G1 X-41.348 Y-5.458 E.01574 G1 X-40.384 Y-5.458 E.0345 G1 X-40.296 Y-5.427 E.00336 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.781 Y-3.776 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.503576 G1 F15000 G1 X-39.494 Y-4.085 E.01583 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.367 Y-4.598 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-38.604 Y-4.657 E.00751 G2 X-39.494 Y-4.55 I-.184 J2.227 E.02773 G1 X-39.755 Y-4.612 E.00825 G1 X-39.831 Y-4.355 E.00825 G1 X-40.144 Y-3.985 E.0149 G1 X-40.358 Y-3.587 E.01386 G1 X-40.457 Y-3.176 E.01298 G1 X-40.451 Y-2.762 E.01274 G1 X-40.398 Y-2.567 E.00622 G1 X-38.395 Y-4.57 E.08706 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.71 Y-4.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.421384 G1 F15000 G1 X-38.051 Y-4.905 E.01194 G1 X-38.539 Y-5.034 E.01555 G1 X-39.063 Y-5.034 E.01617 G1 X-39.559 Y-4.928 E.01563 G1 X-39.831 Y-5.101 E.00995 G3 X-39.85 Y-6.306 I19.034 J-.891 E.03717 G1 X-41.756 Y-6.306 E.05878 G1 X-41.756 Y-5.05 E.03874 G1 X-40.384 Y-5.05 E.0423 G1 X-40.263 Y-5.013 E.00391 G1 X-40.123 Y-4.741 E.00945 G1 X-40.149 Y-4.557 E.0057 G1 X-40.472 Y-4.172 E.0155 G1 X-40.722 Y-3.684 E.01693 G1 X-40.834 Y-3.175 E.01605 G1 X-40.815 Y-2.663 E.0158 G1 X-40.676 Y-2.182 E.01546 G1 X-40.517 Y-1.915 E.00959 G1 X-37.739 Y-4.693 E.12117 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.016 Y-4.322 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.457716 G1 F15000 G1 X-40 Y-1.339 E.14261 G1 X-40.252 Y-1.549 E.0111 G1 X-40.31 Y-1.615 E.00298 G1 X-37.295 Y-4.63 E.14409 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.766 Y-2.805 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-36.767 Y-3.226 E.01294 G1 X-36.902 Y-3.774 E.01734 G1 X-36.954 Y-3.878 E.00357 G1 X-39.672 Y-1.16 E.11809 G1 X-39.295 Y-1.014 E.01242 G1 X-38.794 Y-.949 E.01552 G1 X-38.263 Y-1.021 E.01646 G1 X-37.779 Y-1.221 E.0161 G1 X-37.385 Y-1.529 E.01537 G1 X-37.098 Y-1.877 E.01384 G1 X-36.869 Y-2.338 E.01583 G1 X-36.775 Y-2.766 E.01346 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.196 Y-2.804 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.518498 G1 F15000 G1 X-37.196 Y-3.028 E.00868 G3 X-38.851 Y-1.383 I-172.669 J-172.006 E.09042 G1 X-38.355 Y-1.441 E.01936 G1 X-37.965 Y-1.609 E.01644 G1 X-37.509 Y-2.034 E.02418 G1 X-37.285 Y-2.445 E.01813 G1 X-37.205 Y-2.765 E.01277 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-37.285 Y-2.445 G1 X-37.509 Y-2.034 G1 X-37.965 Y-1.609 G1 X-38.355 Y-1.441 G1 X-38.508 Y-1.423 ;WIPE_END G1 X-39.251 Y-9.019 Z4 F30000 G1 X-39.352 Y-10.052 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z4 F30000 G1 X-42.652 Y-23.367 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z4 F30000 G1 X-51.352 Y-52.052 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:3.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.2 I-.531 J1.095 P1 F30000 G1 X49.601 Y-1.678 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.628 Y-1.684 E.0009 G1 X50 Y-1.758 E.01258 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.562 Y-1.671 E.00794 G1 X49.686 Y-1.252 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.713 Y-1.257 E.00084 G1 X50 Y-1.314 E.00899 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.647 Y-1.244 E.0047 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.713 Y-1.257 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.234 Y-.403 ;WIPE_END G1 X50.411 Y-2.111 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.0003 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50 Y-2.15 I-.815 J-1.989 E.25149 G1 X50.371 Y-2.115 E.01236 G1 X50.454 Y-2.544 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.463 Y-2.543 E.00031 G1 X50.991 Y-2.392 E.01686 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.414 Y-2.548 E.01277 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.463 Y-2.543 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.076 Y-1.532 ;WIPE_END G1 X49.108 Y-8.564 Z4.2 F30000 G1 X30.752 Y-52.052 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z4.2 F30000 G1 X18.752 Y-10.052 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X14.502 Y-6.698 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.215 Y-4.42 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X15.762 Y-2.889 I1.962 J1.412 E.05399 G1 X15.112 Y-2.318 E.02871 G1 X14.713 Y-2.186 E.01393 G1 X14.713 Y-4.747 E.08495 G1 X15.112 Y-4.787 E.01328 G2 X16.422 Y-5.823 I-4.201 J-6.656 E.05553 G3 X17.732 Y-5.975 I.825 J1.384 E.04508 G2 X18.614 Y-5.405 I2.118 J-2.309 E.03501 G1 X18.82 Y-5.365 E.00694 G3 X19.914 Y-4.743 I-.689 J2.486 E.04217 G1 X20.353 Y-4.787 E.01464 G2 X21.337 Y-5.537 I-3.023 J-4.985 E.04113 G1 X21.337 Y-3.125 E.08002 G2 X20.594 Y-2.53 I2.415 J3.776 E.03162 G3 X19.791 Y-1.15 I-2.329 J-.432 E.05401 G1 X20.362 Y-2.504 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.445138 G1 F15000 G1 X17.848 Y-5.018 E.11654 G1 X17.672 Y-4.983 E.00587 G1 X17.406 Y-4.892 E.00924 G1 X20.092 Y-2.206 E.1245 G1 X19.978 Y-1.974 E.00845 G1 X19.888 Y-1.84 E.00529 G1 X17.04 Y-4.688 E.132 G1 X16.73 Y-4.43 E.01324 G1 X19.63 Y-1.53 E.13441 G1 X19.45 Y-1.372 E.00784 G1 X19.311 Y-1.28 E.00547 G1 X16.48 Y-4.111 E.13125 G1 X16.287 Y-3.735 E.01385 G1 X18.935 Y-1.087 E.12275 G1 X18.731 Y-1.018 E.00708 G1 X18.484 Y-.969 E.00822 G1 X16.169 Y-3.284 E.10735 G1 X16.148 Y-2.999 E.00937 G3 X16.164 Y-2.737 I-15.113 J1.091 E.00862 G1 X17.916 Y-.969 E.08157 G1 X17.668 Y-1.018 E.00827 G1 X17.414 Y-1.104 E.0088 G1 X17.173 Y-1.223 E.0088 G1 X16.951 Y-1.371 E.00876 G1 X16.137 Y-2.178 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.713 Y-1.134 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y.495 E.05401 G1 X15.112 Y.455 E.01328 G2 X16.422 Y-.582 I-4.201 J-6.656 E.05553 G1 X17.077 Y-.8 E.02291 G2 X17.965 Y-.57 I1.579 J-4.268 E.03047 G1 X18.387 Y-.272 E.01715 G2 X20.353 Y.455 I1.557 J-1.189 E.07335 G2 X21.337 Y-.296 I-3.023 J-4.985 E.04113 G1 X21.337 Y2.116 E.08002 G1 X21.008 Y2.348 E.01335 G3 X19.043 Y3.075 I-1.557 J-1.189 E.07335 G1 X18.387 Y2.613 E.02659 G2 X16.422 Y1.887 I-1.557 J1.189 E.07335 G2 X15.112 Y2.923 I4.201 J6.656 E.05553 G1 X14.713 Y3.056 E.01393 G1 X14.713 Y5.736 E.08891 G1 X15.112 Y5.696 E.01328 G1 X15.767 Y5.234 E.02659 G3 X17.732 Y4.507 I1.557 J1.189 E.07335 G1 X18.387 Y4.969 E.02659 G2 X20.353 Y5.696 I1.557 J-1.189 E.07335 G2 X21.337 Y4.946 I-3.023 J-4.985 E.04113 G1 X21.337 Y7.358 E.08002 G1 X21.008 Y7.59 E.01335 G3 X19.043 Y8.316 I-1.557 J-1.189 E.07335 G1 X18.387 Y7.855 E.02659 G2 X16.422 Y7.128 I-1.557 J1.189 E.07335 G2 X15.112 Y8.164 I4.201 J6.656 E.05553 G1 X14.713 Y8.297 E.01393 G1 X14.713 Y9.925 E.05401 G1 X16.404 Y13.347 F30000 G1 F16200 G3 X17.659 Y12.62 I1.81 J1.677 E.04883 G1 X17.81 Y12.59 E.00512 G2 X16.422 Y12.369 I-.98 J1.686 E.04771 G2 X15.112 Y13.406 I4.201 J6.656 E.05553 G1 X14.713 Y13.538 E.01393 G1 X14.713 Y10.977 E.08495 G1 X15.112 Y10.937 E.01328 G1 X15.767 Y10.475 E.02659 G3 X17.732 Y9.748 I1.557 J1.189 E.07335 G1 X18.387 Y10.21 E.02659 G2 X20.353 Y10.937 I1.557 J-1.189 E.07335 G2 X21.337 Y10.187 I-3.023 J-4.985 E.04113 G1 X21.337 Y12.599 E.08002 G2 X20.353 Y13.406 I3.287 J5.013 E.04229 G1 X20.116 Y13.484 E.00827 G3 X20.339 Y16.18 I-1.925 J1.516 E.09504 G2 X21.337 Y15.428 I-4.682 J-7.256 E.04149 G1 X21.337 Y17.84 E.08002 G2 X20.535 Y18.487 I2.628 J4.078 E.03422 G1 X18.599 Y18.487 E.06422 G1 X18.387 Y18.337 E.00861 G2 X16.422 Y17.61 I-1.557 J1.189 E.07335 G2 X15.294 Y18.487 I3.542 J5.721 E.04747 G1 X14.713 Y18.487 E.01927 G1 X14.713 Y16.219 E.07524 G1 X15.112 Y16.178 E.01328 G2 X15.844 Y15.649 I-2.113 J-3.694 E.03002 G2 X16.723 Y16.947 I2.418 J-.691 E.05289 G1 X16.75 Y16.966 E.0011 G1 X17.704 Y12.838 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.445138 G1 F15000 G1 X20.218 Y15.352 E.11654 G1 X20.182 Y15.532 E.00601 G1 X20.092 Y15.794 E.00911 G1 X17.406 Y13.108 E.1245 G1 X17.173 Y13.223 E.00849 G1 X17.04 Y13.312 E.00524 G1 X19.888 Y16.16 E.132 G1 X19.63 Y16.47 E.01324 G1 X16.73 Y13.57 E.13441 G1 X16.572 Y13.75 E.00784 G1 X16.48 Y13.889 E.00547 G1 X19.311 Y16.72 E.13125 G1 X18.935 Y16.913 E.01385 G1 X16.287 Y14.265 E.12275 G1 X16.218 Y14.469 E.00708 G1 X16.169 Y14.716 E.00822 G1 X18.484 Y17.031 E.10735 G1 X18.199 Y17.052 E.00937 G1 X17.916 Y17.031 E.00932 G1 X16.169 Y15.284 E.08098 G1 X16.218 Y15.532 E.00827 G1 X16.304 Y15.786 E.0088 G1 X16.423 Y16.027 E.0088 G1 X16.571 Y16.249 E.00876 G1 X17.378 Y17.063 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.384 Y12.992 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.463797 G1 F15000 G2 X20.211 Y14.817 I840.288 J-839.716 E.08856 G1 X20.08 Y14.242 E.02023 G1 X19.927 Y13.941 E.01158 G1 X19.598 Y13.554 E.01743 G1 X19.185 Y13.228 E.01805 G1 X18.719 Y13.037 E.01725 G1 X18.423 Y12.998 E.01024 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.383 Y-5.008 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.462816 G1 F15000 G2 X19.625 Y-3.767 I868.783 J-868.207 E.06009 G1 X20.206 Y-3.187 E.02809 G1 X20.154 Y-3.545 E.0124 G1 X19.955 Y-4.02 E.01763 G1 X19.62 Y-4.429 E.01807 G1 X19.211 Y-4.761 E.01805 G1 X18.697 Y-4.968 E.01893 G1 X18.423 Y-5.003 E.00947 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X18.697 Y-4.968 G1 X19.211 Y-4.761 G1 X19.62 Y-4.429 G1 X19.955 Y-4.02 G1 X19.999 Y-3.915 ;WIPE_END G1 X14.945 Y1.804 Z4.2 F30000 G1 X-2.945 Y22.045 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z4.2 F30000 G1 X-15.232 Y53.745 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.797 J-.745 E.28715 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z4.2 F30000 G1 X-5.6 Y52.94 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27029 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42915 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42913 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48891 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48889 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290582 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.259 Y52.053 E.01236 G1 X-18.463 Y52.406 E.01253 G1 X-18.568 Y52.798 E.01244 G1 X-18.568 Y53.2 E.01236 G1 X-18.463 Y53.594 E.01253 G1 X-18.261 Y53.945 E.01244 G1 X-17.977 Y54.229 E.01236 G1 X-17.624 Y54.433 E.01253 G1 X-17.232 Y54.538 E.01244 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.322 E.0098 G1 X-17.656 Y52.517 E.00934 G1 X-17.788 Y52.798 E.00954 G1 X-17.814 Y53.101 E.00934 G1 X-17.708 Y53.393 E.00954 G1 X-17.513 Y53.626 E.00934 G1 X-17.232 Y53.758 E.00953 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.317 Y52.712 E.00642 G1 X-17.423 Y52.896 E.00653 G1 X-17.423 Y53.106 E.00647 G1 X-17.318 Y53.287 E.00642 G1 X-17.135 Y53.393 E.00652 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.282 Y53.292 E.00644 G1 X-3.174 Y53.107 E.00659 G1 X-3.194 Y52.844 E.00812 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.094 Y53.623 E.00938 G1 X-2.882 Y53.388 E.00974 G1 X-2.793 Y53.102 E.00922 G1 X-2.806 Y52.795 E.00942 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.15 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13116 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01243 G1 X-2.222 Y53.766 E.01277 G1 X-2.071 Y53.402 E.01212 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01244 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-5.819 Y45.852 Z4.2 F30000 G1 X-35.102 Y-6.698 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.494 Y-6.487 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-6.487 E.03916 G1 X-35.313 Y-6.039 E.01485 G1 X-35.991 Y-5.823 E.0236 G3 X-37.21 Y-4.851 I-5.164 J-5.224 E.05182 G3 X-36.361 Y-3.094 I-1.548 J1.832 E.06666 G1 X-35.991 Y-3.355 E.01501 G1 X-35.313 Y-3.413 E.02257 G1 X-35.313 Y-.798 E.08676 G1 X-35.991 Y-.582 E.0236 G3 X-37.301 Y.455 I-5.511 J-5.62 E.05553 G3 X-39.267 Y-.272 I-.408 J-1.916 E.07335 G1 X-39.922 Y-.734 E.02659 G2 X-41.888 Y-.007 I-.408 J1.916 E.07335 G1 X-41.937 Y.028 E.002 G1 X-41.937 Y2.391 E.07842 G3 X-41.232 Y1.887 I2.718 J3.047 E.0288 G3 X-39.267 Y2.613 I.408 J1.916 E.07335 G1 X-38.612 Y3.075 E.02659 G2 X-36.646 Y2.348 I.408 J-1.916 E.07335 G1 X-35.991 Y1.887 E.02659 G1 X-35.313 Y1.828 E.02257 G1 X-35.313 Y4.443 E.08676 G1 X-35.991 Y4.659 E.0236 G3 X-37.301 Y5.696 I-5.511 J-5.62 E.05553 G3 X-39.267 Y4.969 I-.408 J-1.916 E.07335 G1 X-39.922 Y4.507 E.02659 G2 X-41.888 Y5.234 I-.408 J1.916 E.07335 G1 X-41.937 Y5.269 E.002 G1 X-41.937 Y7.633 E.07842 G3 X-41.232 Y7.128 I2.718 J3.047 E.0288 G3 X-39.267 Y7.855 I.408 J1.916 E.07335 G1 X-38.612 Y8.316 E.02659 G2 X-36.646 Y7.59 I.408 J-1.916 E.07335 G1 X-35.991 Y7.128 E.02659 G1 X-35.313 Y7.069 E.02257 G1 X-35.313 Y9.685 E.08676 G1 X-35.991 Y9.901 E.0236 G3 X-37.301 Y10.937 I-5.511 J-5.62 E.05553 G3 X-39.267 Y10.21 I-.408 J-1.916 E.07335 G1 X-39.922 Y9.748 E.02659 G2 X-41.888 Y10.475 I-.408 J1.916 E.07335 G1 X-41.937 Y10.51 E.002 G1 X-41.937 Y12.874 E.07842 G3 X-41.232 Y12.369 I2.718 J3.047 E.0288 G3 X-39.69 Y12.725 I.417 J1.712 E.05448 G1 X-39.723 Y12.737 E.00117 G2 X-41.236 Y15.145 I.933 J2.265 E.10064 G3 X-41.937 Y15.751 I-3.193 J-2.981 E.03082 G1 X-41.937 Y18.115 E.07842 G3 X-41.232 Y17.61 I2.718 J3.047 E.0288 G3 X-39.267 Y18.337 I.408 J1.916 E.07335 G1 X-39.055 Y18.487 E.00861 G1 X-37.119 Y18.487 E.06422 G3 X-35.991 Y17.61 I4.67 J4.845 E.04747 G1 X-35.313 Y17.552 E.02257 G1 X-35.336 Y14.924 E.08719 G2 X-36.414 Y15.513 I.16 J1.574 E.04187 G1 X-36.391 Y15.394 E.00404 G2 X-37.109 Y13.237 I-2.426 J-.389 E.0784 G3 X-35.991 Y12.369 I4.626 J4.805 E.04705 G1 X-35.313 Y12.311 E.02257 G1 X-35.313 Y10.682 E.05401 G1 X-37.045 Y13.98 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.462595 G1 F15000 G1 X-37.38 Y13.571 E.01807 G1 X-37.768 Y13.255 E.01713 G1 X-38.267 Y13.042 E.01856 G1 X-38.616 Y12.992 E.01205 G2 X-37.375 Y14.233 I809.635 J-809.062 E.06003 G1 X-36.794 Y14.814 E.02807 G1 X-36.846 Y14.455 E.01239 G1 X-37.029 Y14.016 E.01625 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.638 Y15.496 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445138 G1 F15000 G1 X-39.152 Y12.982 E.11654 G1 X-39.328 Y13.017 E.00587 G1 X-39.594 Y13.108 E.00924 G1 X-36.908 Y15.794 E.1245 G1 X-37.023 Y16.027 E.00849 G1 X-37.112 Y16.16 E.00525 G1 X-39.96 Y13.312 E.132 G1 X-40.27 Y13.57 E.01324 G1 X-37.37 Y16.47 E.13441 G1 X-37.55 Y16.628 E.00784 G1 X-37.689 Y16.72 E.00547 G1 X-40.52 Y13.889 E.13125 G1 X-40.713 Y14.265 E.01385 G1 X-38.065 Y16.913 E.12275 G1 X-38.269 Y16.982 E.00708 G1 X-38.516 Y17.031 E.00822 G1 X-40.831 Y14.716 E.10735 G1 X-40.852 Y14.999 E.00933 G1 X-40.831 Y15.284 E.00936 G1 X-39.084 Y17.031 E.08098 G1 X-39.332 Y16.982 E.00827 G1 X-39.586 Y16.896 E.0088 G1 X-39.827 Y16.777 E.0088 G1 X-40.049 Y16.629 E.00876 G1 X-40.863 Y15.822 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.638 Y-2.504 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.152 Y-5.018 E.11654 G1 X-39.328 Y-4.983 E.00588 G1 X-39.594 Y-4.892 E.00924 G1 X-36.908 Y-2.206 E.1245 G1 X-37.022 Y-1.974 E.00845 G1 X-37.112 Y-1.84 E.00529 G1 X-39.96 Y-4.688 E.132 G1 X-40.27 Y-4.43 E.01324 G1 X-37.37 Y-1.53 E.13441 G1 X-37.55 Y-1.372 E.00784 G1 X-37.689 Y-1.28 E.00547 G1 X-40.52 Y-4.111 E.13125 G1 X-40.713 Y-3.735 E.01385 G1 X-38.065 Y-1.087 E.12275 G1 X-38.269 Y-1.018 E.00708 G1 X-38.516 Y-.969 E.00822 G1 X-40.831 Y-3.284 E.10735 G1 X-40.852 Y-2.999 E.00937 G3 X-40.836 Y-2.737 I-15.097 J1.09 E.00862 G1 X-39.084 Y-.969 E.08157 G1 X-39.332 Y-1.018 E.00827 G1 X-39.586 Y-1.104 E.0088 G1 X-39.826 Y-1.222 E.00876 G1 X-40.049 Y-1.371 E.0088 G1 X-40.863 Y-2.178 E.03757 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.478 Y-4.773 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-40.519 Y-4.738 E.00178 G2 X-41.232 Y-3.355 I1.984 J1.899 E.05234 G2 X-41.937 Y-2.85 I2.013 J3.552 E.0288 G1 X-41.937 Y-5.214 E.07842 G2 X-41.232 Y-5.823 I-2.503 J-3.605 E.03096 G3 X-39.922 Y-5.975 I.825 J1.384 E.04508 G2 X-39.106 Y-5.425 I1.857 J-1.875 E.03285 G1 X-39.049 Y-5.429 E.00188 G3 X-37.585 Y-5.121 I.258 J2.407 E.05045 G1 X-36.794 Y-3.186 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.462597 G1 F15000 G1 X-36.846 Y-3.545 E.01239 G1 X-37.045 Y-4.02 E.01762 G1 X-37.38 Y-4.429 E.01806 G1 X-37.768 Y-4.745 E.01713 G1 X-38.267 Y-4.958 E.01856 G1 X-38.616 Y-5.008 E.01205 G2 X-37.375 Y-3.767 I806.319 J-805.744 E.06003 G1 X-36.822 Y-3.215 E.02671 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-37.375 Y-3.767 G1 X-38.237 Y-4.629 ;WIPE_END G1 X-39.352 Y-10.052 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z4.2 F30000 G1 X-42.652 Y-23.367 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 M73 P55 R35 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z4.2 F30000 G1 X-51.352 Y-52.052 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.4 I-.531 J1.095 P1 F30000 G1 X49.619 Y-1.682 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.641 Y-1.686 E.00076 G1 X50 Y-1.758 E.01214 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.579 Y-1.674 E.00852 G1 X49.703 Y-1.255 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.726 Y-1.26 E.0007 G1 X50 Y-1.314 E.00859 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.664 Y-1.247 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.726 Y-1.26 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.237 Y-.386 ;WIPE_END G1 X50.409 Y-2.112 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00037 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50 Y-2.15 I-.815 J-1.989 E.25149 G1 X50.369 Y-2.115 E.01229 G1 X50.451 Y-2.545 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.46 Y-2.544 E.00027 G1 X50.991 Y-2.392 E.01696 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.412 Y-2.548 E.01271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.46 Y-2.544 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.074 Y-1.534 ;WIPE_END G1 X49.107 Y-8.565 Z4.4 F30000 G1 X30.752 Y-52.052 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z4.4 F30000 G1 X18.752 Y-10.052 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X14.502 Y-6.698 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.424 Z4.4 F30000 G1 Z4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.796 E.05401 G1 X15.112 Y-4.906 E.01371 G3 X16.422 Y-5.936 I9.936 J11.298 E.05531 G3 X18.229 Y-5.443 I.51 J1.689 E.0655 G3 X19.877 Y-4.774 I-.037 J2.455 E.06038 G1 X20.353 Y-4.906 E.01637 G3 X21.337 Y-5.694 I7.594 J8.477 E.04184 G1 X21.337 Y-6.487 E.0263 G1 X20.501 Y-6.487 E.02771 G1 X20.265 Y-2.184 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.450332 G1 F12000 G1 X19.016 Y-.935 E.05864 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.288 Y-.783 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.417 Y-2.912 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.373 Y-3.444 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.756 Y-.827 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.316 Y-.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.237 Y-3.884 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.03 Y-4.253 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.947 Y-1.17 E.14475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.629 Y-1.429 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.771 Y-4.571 E.14753 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.453 Y-4.83 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.37 Y-1.747 E.14474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.163 Y-2.116 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.084 Y-5.037 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.644 Y-5.173 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.027 Y-2.556 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.983 Y-3.088 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.112 Y-5.217 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.384 Y-5.065 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.135 Y-3.816 E.05863 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.108 Y-4.261 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X15.885 Y-3.771 I2.395 J1.386 E.01787 G2 X15.774 Y-2.701 I2.221 J.772 E.03601 G1 X15.774 Y-2.697 E.00012 G3 X15.112 Y-2.206 I-4.764 J-5.729 E.02739 G1 X14.713 Y-2.144 E.01337 G1 X14.713 Y.446 E.08589 G1 X15.112 Y.335 E.01371 G1 X15.767 Y-.209 E.02825 G3 X17.747 Y-.602 I1.257 J1.146 E.0717 G1 X18.387 Y-.071 E.02761 G2 X20.353 Y.335 I1.26 J-1.14 E.07122 G3 X21.337 Y-.453 I7.594 J8.477 E.04184 G1 X21.337 Y-2.964 E.08331 G3 X20.559 Y-2.358 I-5.852 J-6.712 E.03273 G3 X19.677 Y-1.053 I-2.43 J-.69 E.05315 G1 X19.656 Y-1.039 E.00083 G1 X14.713 Y1.469 F30000 G1 F16200 G1 X14.713 Y3.097 E.05401 G1 X15.112 Y3.036 E.01337 G1 X15.767 Y2.55 E.02705 G3 X17.732 Y1.926 I1.454 J1.172 E.07247 G1 X18.387 Y2.412 E.02705 G2 X20.353 Y3.036 I1.454 J-1.172 E.07247 G2 X21.337 Y2.277 I-6.346 J-9.25 E.04124 G1 X21.337 Y4.789 E.08331 G1 X21.008 Y5.032 E.01358 G3 X19.043 Y5.656 I-1.454 J-1.172 E.07247 G1 X18.387 Y5.171 E.02705 G2 X16.422 Y4.547 I-1.454 J1.172 E.07247 G2 X15.112 Y5.576 I8.626 J12.328 E.05531 G1 X14.713 Y5.687 E.01371 G1 X14.713 Y8.339 E.08797 G1 X15.112 Y8.277 E.01337 G1 X15.767 Y7.791 E.02705 G3 X17.732 Y7.167 I1.454 J1.172 E.07247 G1 X18.387 Y7.653 E.02705 G2 X20.353 Y8.277 I1.454 J-1.172 E.07247 G2 X21.337 Y7.518 I-6.346 J-9.25 E.04124 G1 X21.337 Y10.03 E.08331 G1 X21.008 Y10.274 E.01358 G3 X19.043 Y10.897 I-1.454 J-1.172 E.07247 G1 X18.387 Y10.412 E.02705 G2 X16.422 Y9.788 I-1.454 J1.172 E.07247 G2 X15.112 Y10.818 I8.626 J12.328 E.05531 G1 X14.713 Y10.928 E.01371 G1 X14.713 Y12.556 E.05401 G1 X16.021 Y13.902 F30000 G1 F16200 G2 X15.808 Y15.484 I2.18 J1.098 E.05395 G2 X15.112 Y16.059 I4.836 J6.571 E.02999 G1 X14.713 Y16.169 E.01371 G1 X14.713 Y13.58 E.08589 G1 X15.112 Y13.518 E.01337 G2 X16.422 Y12.489 I-8.626 J-12.327 E.05531 G3 X17.732 Y12.409 I.743 J1.408 E.04488 G2 X18.213 Y12.556 I.38 J-.385 E.01736 G1 X18.358 Y12.565 E.00481 G3 X20.164 Y13.548 I-.14 J2.409 E.07045 G1 X20.353 Y13.518 E.00634 G2 X21.337 Y12.76 I-6.346 J-9.25 E.04124 G1 X21.337 Y15.271 E.08331 G2 X20.43 Y15.995 I6.072 J8.539 E.03851 G3 X19.337 Y17.16 I-2.259 J-1.024 E.05394 G1 X19.016 Y17.065 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.450333 G1 F12000 G1 X20.265 Y15.816 E.05864 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.417 Y15.088 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.288 Y17.217 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.756 Y17.173 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.373 Y14.556 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.237 Y14.116 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.316 Y17.036 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.947 Y16.83 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.03 Y13.747 E.14475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.771 Y13.429 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.629 Y16.571 E.14753 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.37 Y16.253 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.453 Y13.17 E.14475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.084 Y12.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.163 Y15.884 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.027 Y15.444 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.644 Y12.827 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.112 Y12.783 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.983 Y14.912 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.135 Y14.184 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.384 Y12.935 E.05863 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X16.135 Y14.184 ;WIPE_END G1 X21.337 Y16.373 Z4.4 F30000 G1 Z4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y18.001 E.05401 G3 X20.721 Y18.487 I-4.689 J-5.312 E.02605 G1 X18.81 Y18.487 E.06337 G2 X17.732 Y17.65 I-8.083 J9.302 E.0453 G2 X15.767 Y18.274 I-.512 J1.796 E.07247 G1 X15.479 Y18.487 E.01186 G1 X17.108 Y18.487 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X15.479 Y18.487 G1 X15.767 Y18.274 G1 X15.778 Y18.265 ;WIPE_END G1 X8.296 Y19.775 Z4.4 F30000 G1 X-2.945 Y22.045 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z4.4 F30000 G1 X-15.232 Y53.745 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.797 J-.745 E.28713 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z4.4 F30000 G1 X-5.6 Y52.94 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.255 J1.929 E.27026 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42913 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.4291 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48888 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48887 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290582 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.259 Y52.053 E.01234 G1 X-18.463 Y52.406 E.01255 G1 X-18.568 Y52.798 E.01244 G1 X-18.568 Y53.199 E.01234 G1 X-18.463 Y53.594 E.01255 G1 X-18.261 Y53.945 E.01244 G1 X-17.977 Y54.229 E.01234 G1 X-17.624 Y54.433 E.01255 G1 X-17.232 Y54.538 E.01244 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.322 E.0098 G1 X-17.656 Y52.517 E.00932 G1 X-17.788 Y52.799 E.00957 G1 X-17.814 Y53.101 E.00932 G1 X-17.708 Y53.393 E.00957 G1 X-17.513 Y53.626 E.00932 G1 X-17.232 Y53.758 E.00954 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.317 Y52.711 E.00642 G1 X-17.424 Y52.896 E.00655 G1 X-17.422 Y53.107 E.00646 G1 X-17.319 Y53.287 E.00641 G1 X-17.135 Y53.393 E.00652 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.54 Y52.951 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.471054 G1 F15000 G2 X-3.533 Y53.032 I-.025 J.043 E.00756 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.727 Y52.621 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.283 Y53.293 E.00641 G1 X-3.175 Y53.111 E.00648 G1 X-3.194 Y52.843 E.00825 G1 X-3.323 Y52.677 E.00646 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.095 Y53.624 E.00937 G1 X-2.881 Y53.386 E.00983 G1 X-2.792 Y53.086 E.00961 G1 X-2.806 Y52.796 E.00892 G1 X-2.948 Y52.522 E.00949 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-2.637 Y53.689 I.717 J-.912 E.05709 G1 X-2.439 Y53.305 E.01327 G1 X-2.419 Y52.843 E.01421 G2 X-3.665 Y51.836 I-1.184 J.191 E.0539 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.0316 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01244 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01243 G1 X-2.22 Y53.764 E.01287 G1 X-2.072 Y53.402 E.01201 G1 X-2.019 Y52.987 E.01287 G1 X-2.071 Y52.599 E.01203 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-5.819 Y45.852 Z4.4 F30000 G1 X-35.102 Y-6.698 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.735 Y-2.184 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.450333 G1 F12000 G1 X-37.984 Y-.935 E.05864 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.712 Y-.783 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.583 Y-2.912 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.627 Y-3.444 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.244 Y-.827 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.684 Y-.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.763 Y-3.884 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.97 Y-4.253 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.053 Y-1.17 E.14475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.371 Y-1.429 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.229 Y-4.571 E.14753 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.547 Y-4.83 F30000 M73 P56 R35 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.63 Y-1.747 E.14475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.837 Y-2.116 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.916 Y-5.037 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.356 Y-5.173 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.973 Y-2.556 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.017 Y-3.088 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.888 Y-5.217 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.616 Y-5.065 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.865 Y-3.816 E.05863 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.565 Y-4.688 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-41.232 Y-3.235 I1.826 J1.719 E.05399 G3 X-41.937 Y-2.655 I-5.587 J-6.061 E.0303 G1 X-41.937 Y-.168 E.08248 G3 X-41.232 Y-.694 I5.097 J6.087 E.02918 G3 X-39.267 Y-.071 I.512 J1.796 E.07247 G1 X-38.612 Y.415 E.02705 G2 X-36.646 Y-.209 I.512 J-1.796 E.07247 G1 X-35.991 Y-.694 E.02705 G1 X-35.313 Y-.79 E.02271 G1 X-35.313 Y1.828 E.08684 G1 X-35.991 Y2.006 E.02326 G3 X-37.301 Y3.036 I-9.936 J-11.298 E.05531 G3 X-39.267 Y2.412 I-.512 J-1.796 E.07247 G1 X-39.922 Y1.926 E.02705 G2 X-41.888 Y2.55 I-.512 J1.796 E.07247 G1 X-41.937 Y2.587 E.00203 G1 X-41.937 Y5.073 E.08248 G3 X-41.232 Y4.547 I5.097 J6.087 E.02918 G3 X-39.267 Y5.171 I.512 J1.796 E.07247 G1 X-38.612 Y5.656 E.02705 G2 X-36.646 Y5.032 I.512 J-1.796 E.07247 G1 X-35.991 Y4.547 E.02705 G1 X-35.313 Y4.451 E.02271 G1 X-35.313 Y7.069 E.08684 G1 X-35.991 Y7.247 E.02326 G3 X-37.301 Y8.277 I-9.936 J-11.298 E.05531 G3 X-39.267 Y7.653 I-.512 J-1.796 E.07247 G1 X-39.922 Y7.167 E.02705 G2 X-41.888 Y7.791 I-.512 J1.796 E.07247 G1 X-41.937 Y7.828 E.00203 G1 X-41.937 Y10.314 E.08248 G3 X-41.232 Y9.788 I5.097 J6.087 E.02918 G3 X-39.267 Y10.412 I.512 J1.796 E.07247 G1 X-38.612 Y10.897 E.02705 G2 X-36.646 Y10.274 I.512 J-1.796 E.07247 G1 X-35.991 Y9.788 E.02705 G1 X-35.313 Y9.693 E.02271 G1 X-35.313 Y12.31 E.08684 G1 X-35.991 Y12.489 E.02326 G3 X-37.03 Y13.317 I-7.99 J-8.954 E.04411 G1 X-36.918 Y13.446 E.00566 G3 X-36.376 Y15.315 I-1.863 J1.553 E.06642 G1 X-35.991 Y15.029 E.01589 G1 X-35.313 Y14.934 E.02271 G1 X-35.313 Y17.552 E.08684 G1 X-35.991 Y17.73 E.02326 G3 X-36.934 Y18.487 I-7.295 J-8.118 E.04012 G1 X-38.844 Y18.487 E.06337 G2 X-39.922 Y17.65 I-8.083 J9.302 E.0453 G2 X-41.888 Y18.274 I-.512 J1.796 E.07247 G1 X-41.937 Y18.487 E.00725 G1 X-40.485 Y18.487 E.04816 G1 X-40.696 Y16.539 F30000 G1 F16200 G1 X-40.731 Y16.499 E.00176 G3 X-41.243 Y15.037 I1.934 J-1.498 E.05227 G2 X-41.937 Y15.556 I4.329 J6.516 E.02876 G1 X-41.937 Y13.069 E.08248 G2 X-41.232 Y12.489 I-4.881 J-6.64 E.0303 G3 X-39.922 Y12.409 I.743 J1.408 E.04488 G1 X-39.556 Y12.68 E.01511 G1 X-39.603 Y12.696 E.00166 G2 X-40.829 Y13.644 I.804 J2.304 E.05229 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.299 Y13.069 G1 X-39.603 Y12.696 G1 X-39.556 Y12.68 G1 X-39.861 Y12.454 ;WIPE_END G1 X-37.984 Y17.065 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.450333 G1 F12000 G1 X-36.735 Y15.816 E.05864 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.583 Y15.088 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.712 Y17.217 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.244 Y17.173 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.627 Y14.556 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.763 Y14.116 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.684 Y17.037 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.053 Y16.83 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.97 Y13.747 E.14475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.229 Y13.429 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.371 Y16.571 E.14753 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.63 Y16.253 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.547 Y13.17 E.14475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.916 Y12.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.837 Y15.884 E.13713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.973 Y15.444 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.356 Y12.827 E.12286 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.888 Y12.783 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.017 Y14.912 E.09993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.865 Y14.184 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.616 Y12.935 E.05863 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.926 Y-1.436 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-36.537 Y-2.077 I-1.938 J-1.617 E.02497 G1 X-36.519 Y-2.13 E.00186 G2 X-36.364 Y-2.863 I-2.352 J-.88 E.02493 G1 X-36.359 Y-2.929 E.00221 G1 X-35.991 Y-3.235 E.01588 G1 X-35.313 Y-3.413 E.02326 G1 X-35.313 Y-6.031 E.08684 G1 X-35.991 Y-5.936 E.02271 G2 X-37.286 Y-4.919 I8.521 J12.186 E.05466 G2 X-39.339 Y-5.38 I-1.516 J1.944 E.07212 G1 X-39.348 Y-5.379 E.00028 G2 X-41.232 Y-5.936 I-1.374 J1.182 E.0689 G2 X-41.937 Y-5.409 I4.392 J6.613 E.02918 G1 X-41.937 Y-6.487 E.03574 G1 X-41.386 Y-6.487 E.01827 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.937 Y-6.487 G1 X-41.937 Y-5.409 G1 X-41.639 Y-5.632 ;WIPE_END G1 X-39.352 Y-10.052 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z4.4 F30000 G1 X-42.652 Y-23.367 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z4.4 F30000 G1 X-51.352 Y-52.052 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:4.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.6 I-.531 J1.095 P1 F30000 G1 X49.636 Y-1.685 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.654 Y-1.689 E.0006 G1 X50 Y-1.758 E.0117 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.597 Y-1.677 E.00912 G1 X49.721 Y-1.259 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.739 Y-1.262 E.00056 G1 X50 Y-1.314 E.00818 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.682 Y-1.251 E.00579 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.739 Y-1.262 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.241 Y-.368 ;WIPE_END G1 X50.407 Y-2.112 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00044 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50 Y-2.15 I-.815 J-1.989 E.25149 G1 X50.367 Y-2.116 E.01222 G1 X50.449 Y-2.545 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.457 Y-2.544 E.00023 G1 X50.991 Y-2.392 E.01706 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.409 Y-2.549 E.01264 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.457 Y-2.544 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.073 Y-1.535 ;WIPE_END G1 X49.105 Y-8.567 Z4.6 F30000 G1 X30.752 Y-52.052 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z4.6 F30000 G1 X18.752 Y-10.052 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.625 Y-3.608 Z4.6 F30000 G1 X18.861 Y-.954 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.92 E.00363 G3 X18.2 Y-.846 I-.562 J-2.08 E.0187 G3 X17.919 Y-5.136 I.005 J-2.155 E.21486 G3 X19.024 Y-1.011 I.277 J2.136 E.20549 G1 X18.899 Y-.968 E.00438 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.731 Y-1.34 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.652 Y-1.314 E.00275 G3 X18.2 Y-1.254 I-.455 J-1.686 E.01516 G3 X17.972 Y-4.731 I.004 J-1.747 E.17417 G3 X18.868 Y-1.388 I.224 J1.732 E.16658 G1 X18.768 Y-1.353 E.0035 G1 X18.591 Y-1.752 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.539 Y-1.735 E.00167 G3 X18.2 Y-1.69 I-.342 J-1.265 E.01054 G3 X18.029 Y-4.299 I.003 J-1.311 E.12106 G3 X18.701 Y-1.79 I.168 J1.299 E.11579 G1 X18.628 Y-1.765 E.00236 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.539 Y-1.735 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.991 Y-2.524 ;WIPE_END G1 X18.353 Y4.985 Z4.6 F30000 G1 X19.94 Y13.734 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X20.062 Y13.925 E.00751 G3 X18.2 Y17.154 I-1.866 J1.075 E.14945 G3 X17.919 Y12.864 I.005 J-2.155 E.21486 G3 X19.906 Y13.691 I.277 J2.136 E.07476 G1 X19.915 Y13.703 E.0005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.601 Y13.961 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X19.709 Y14.128 E.00663 G3 X18.2 Y16.746 I-1.513 J.872 E.12115 G3 X17.972 Y13.269 I.004 J-1.747 E.17417 G3 X19.576 Y13.93 I.224 J1.732 E.06022 G1 X19.238 Y14.204 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X18.2 Y16.31 I-1.04 J.796 E.08947 G3 X18.029 Y13.701 I.003 J-1.311 E.12106 G3 X19.213 Y14.172 I.168 J1.299 E.0409 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.335 Y14.345 G1 X19.411 Y14.499 G1 X19.499 Y14.829 G1 X19.499 Y15.171 G1 X19.466 Y15.339 G1 X19.411 Y15.501 G1 X19.24 Y15.798 G1 X19.064 Y15.973 ;WIPE_END G1 X17.558 Y8.491 Z4.6 F30000 G1 X14.502 Y-6.698 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.45 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.822 E.05401 G1 X15.112 Y-5.006 E.01455 G3 X16.094 Y-5.943 I5.976 J5.28 E.04511 G3 X18.125 Y-5.361 I.652 J1.559 E.07571 G3 X19.789 Y-4.746 I.069 J2.372 E.06032 G1 X20.353 Y-5.006 E.02058 G3 X21.337 Y-5.944 I7.056 J6.416 E.04514 G1 X21.337 Y-6.487 E.01802 G1 X20.252 Y-6.487 E.036 G1 X20.466 Y-3.67 F30000 G1 F16200 G3 X20.377 Y-2.077 I-2.316 J.67 E.05395 G2 X21.337 Y-2.807 I-.932 J-2.22 E.04045 G1 X21.337 Y-.702 E.06982 G2 X20.353 Y.236 I6.072 J7.354 E.04514 G3 X18.715 Y.422 I-.993 J-1.437 E.05695 G3 X17.732 Y-.515 I4.993 J-6.218 E.04511 G2 X16.094 Y-.702 I-.993 J1.437 E.05695 G2 X15.112 Y.236 I4.993 J6.218 E.04511 G1 X14.713 Y.419 E.01455 G1 X14.713 Y-2.077 E.0828 G2 X15.767 Y-2.476 I.171 J-1.139 E.03905 G2 X15.854 Y-2.691 I-.028 J-.137 E.00908 G3 X16.139 Y-4.159 I2.429 J-.29 E.05041 G1 X14.713 Y1.536 F30000 G1 F16200 G1 X14.713 Y3.164 E.05401 G2 X15.439 Y3.043 I.222 J-.906 E.0251 G2 X16.422 Y2.105 I-4.993 J-6.218 E.04511 G3 X17.732 Y1.787 I1.024 J1.361 E.04599 G1 X18.06 Y1.919 E.01171 G3 X19.043 Y2.856 I-4.993 J6.218 E.04511 G2 X20.353 Y3.174 I1.024 J-1.361 E.04599 G2 X21.337 Y2.434 I-.904 J-2.226 E.04131 G1 X21.337 Y4.539 E.06982 G2 X20.353 Y5.477 I6.071 J7.354 E.04514 G3 X19.043 Y5.795 I-1.024 J-1.361 E.04599 G1 X18.715 Y5.664 E.01171 G3 X17.732 Y4.726 I4.993 J-6.218 E.04511 G2 X16.422 Y4.408 I-1.024 J1.361 E.04599 G1 X16.094 Y4.539 E.01171 G2 X15.112 Y5.477 I4.993 J6.218 E.04511 G1 X14.713 Y5.66 E.01455 G1 X14.713 Y8.406 E.09107 G2 X15.439 Y8.284 I.222 J-.906 E.0251 G2 X16.422 Y7.347 I-4.993 J-6.218 E.04511 G3 X17.732 Y7.029 I1.024 J1.361 E.04599 G1 X18.06 Y7.16 E.01171 G3 X19.043 Y8.098 I-4.993 J6.218 E.04511 G2 X20.353 Y8.416 I1.024 J-1.361 E.04599 G2 X21.337 Y7.675 I-.904 J-2.226 E.04131 G1 X21.337 Y9.78 E.06982 G2 X20.353 Y10.718 I6.071 J7.354 E.04514 G3 X19.043 Y11.036 I-1.024 J-1.361 E.04599 G1 X18.715 Y10.905 E.01171 G3 X17.732 Y9.967 I4.993 J-6.218 E.04511 G2 X16.422 Y9.649 I-1.024 J1.361 E.04599 G1 X16.094 Y9.781 E.01171 G2 X15.112 Y10.718 I4.993 J6.218 E.04511 G1 X14.713 Y10.902 E.01455 G1 X14.713 Y12.53 E.05401 G1 X16.24 Y13.684 F30000 G1 F16200 G2 X15.849 Y15.23 I2.253 J1.392 E.05373 G2 X15.112 Y15.96 I3.9 J4.68 E.03446 G1 X14.713 Y16.143 E.01455 G1 X14.713 Y13.647 E.0828 G2 X15.767 Y13.248 I.171 J-1.139 E.03905 G1 X16.422 Y12.588 E.03084 G3 X18.06 Y12.401 I.993 J1.437 E.05695 G1 X18.345 Y12.644 E.01243 G3 X20.138 Y13.652 I-.226 J2.5 E.07029 G2 X21.008 Y13.248 I.019 J-1.098 E.03292 G1 X21.337 Y12.917 E.01548 G1 X21.337 Y15.021 E.06982 G2 X20.365 Y15.947 I6.013 J7.285 E.04456 G3 X19.269 Y17.105 I-2.394 J-1.168 E.05373 G1 X21.337 Y16.53 F30000 G1 F16200 G1 X21.337 Y18.158 E.05401 G1 X21.01 Y18.487 E.01538 G1 X18.95 Y18.487 E.06834 G2 X17.732 Y17.511 I-2.385 J1.73 E.05238 G2 X16.422 Y17.829 I-.286 J1.679 E.04599 G1 X15.769 Y18.487 E.03074 G1 X14.713 Y18.487 E.03502 G1 X14.713 Y17.914 E.019 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.713 Y18.487 G1 X15.769 Y18.487 G1 X16.031 Y18.223 ;WIPE_END G1 X8.548 Y19.73 Z4.6 F30000 G1 X-2.945 Y22.045 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z4.6 F30000 G1 X-15.232 Y53.745 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z4.6 F30000 G1 X-5.6 Y52.94 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27034 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.48835 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48893 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290587 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01244 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.319 Y46.157 Z4.6 F30000 G1 X-37.67 Y-1.17 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.724 Y-1.136 E.0021 G3 X-38.8 Y-.846 I-1.08 J-1.864 E.0374 G3 X-39.081 Y-5.136 I.005 J-2.155 E.21486 G3 X-37.49 Y-1.293 I.277 J2.136 E.1868 G1 X-37.637 Y-1.192 E.00591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.896 Y-1.508 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.928 Y-1.489 E.00122 G3 X-38.8 Y-1.254 I-.876 J-1.511 E.03032 G3 X-39.028 Y-4.731 I.004 J-1.747 E.17417 G3 X-37.738 Y-1.616 I.224 J1.732 E.15143 G1 X-37.863 Y-1.531 E.00502 G1 X-38.135 Y-1.873 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.145 Y-1.866 E.00039 G3 X-38.8 Y-1.69 I-.657 J-1.134 E.02107 G3 X-38.971 Y-4.299 I.003 J-1.311 E.12106 G3 X-37.875 Y-2.075 I.168 J1.299 E.09999 G1 X-38.103 Y-1.897 E.00889 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.145 Y-1.866 G1 X-38.299 Y-1.789 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.876 Y-2.256 ;WIPE_END G1 X-40.121 Y5.372 Z4.6 F30000 G1 X-40.474 Y16.352 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.506 Y16.309 E.00177 G3 X-39.081 Y12.864 I1.711 J-1.31 E.14944 G3 X-38.8 Y17.154 I.277 J2.136 E.23355 G3 X-40.321 Y16.521 I.005 J-2.155 E.05608 G1 X-40.447 Y16.381 E.00624 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.168 Y16.083 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.183 Y16.061 E.00089 G3 X-39.028 Y13.269 I1.387 J-1.062 E.12114 G3 X-38.8 Y16.746 I.224 J1.732 E.18932 G3 X-40.033 Y16.233 I.004 J-1.747 E.04546 G1 X-40.141 Y16.113 E.00535 G1 X-39.838 Y15.796 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-38.971 Y13.701 I1.041 J-.797 E.0842 G3 X-38.8 Y16.31 I.168 J1.299 E.13159 G3 X-39.813 Y15.828 I.003 J-1.311 E.03564 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.935 Y15.655 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.661 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.664 Y14.027 ;WIPE_END G1 X-38.023 Y6.573 Z4.6 F30000 G1 X-35.102 Y-6.698 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.18 Y-6.487 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-6.487 E.02512 G1 X-41.937 Y-5.616 E.0289 G3 X-41.56 Y-5.943 I2.104 J2.041 E.01658 G3 X-39.443 Y-5.275 I.641 J1.656 E.07954 G3 X-37.617 Y-5.049 I.64 J2.327 E.06263 G2 X-37.301 Y-5.006 I.171 J-.075 E.01265 G1 X-36.646 Y-5.665 E.03084 G3 X-35.991 Y-6.075 I.94 J.776 E.02607 G1 X-35.313 Y-6.048 E.02251 G1 X-35.313 Y-3.438 E.08656 G2 X-36.46 Y-2.664 I.427 J1.868 E.04696 G3 X-41.155 Y-3.172 I-2.337 J-.353 E.23964 G2 X-41.937 Y-2.434 I7.882 J9.147 E.03567 G1 X-41.937 Y-.374 E.06833 G3 X-41.56 Y-.702 I2.104 J2.041 E.01658 G3 X-39.922 Y-.515 I.644 J1.624 E.05695 G2 X-38.939 Y.422 I5.976 J-5.28 E.04511 G2 X-37.301 Y.236 I.644 J-1.624 E.05695 G1 X-36.646 Y-.424 E.03084 G3 X-35.991 Y-.833 I.94 J.776 E.02607 G1 X-35.313 Y-.807 E.02251 G1 X-35.313 Y1.803 E.08656 G1 X-35.991 Y2.105 E.02463 G3 X-36.974 Y3.043 I-5.976 J-5.28 E.04511 G3 X-38.612 Y2.856 I-.644 J-1.624 E.05695 G2 X-39.595 Y1.919 I-5.976 J5.28 E.04511 G2 X-41.232 Y2.105 I-.644 J1.624 E.05695 G3 X-41.937 Y2.807 I-4.455 J-3.77 E.03302 G1 X-41.937 Y4.867 E.06833 G3 X-41.56 Y4.539 I2.104 J2.041 E.01658 G3 X-39.922 Y4.726 I.644 J1.624 E.05695 G2 X-38.939 Y5.664 I5.976 J-5.28 E.04511 G2 X-37.301 Y5.477 I.644 J-1.624 E.05695 G1 X-36.646 Y4.817 E.03084 G3 X-35.991 Y4.408 I.94 J.776 E.02607 G1 X-35.313 Y4.435 E.02251 G1 X-35.313 Y7.044 E.08656 G1 X-35.991 Y7.347 E.02463 G3 X-36.974 Y8.284 I-5.976 J-5.28 E.04511 G3 X-38.612 Y8.098 I-.644 J-1.624 E.05695 G2 X-39.595 Y7.16 I-5.976 J5.28 E.04511 G2 X-41.232 Y7.347 I-.644 J1.624 E.05695 G3 X-41.937 Y8.048 I-4.455 J-3.77 E.03302 G1 X-41.937 Y10.108 E.06833 G3 X-41.56 Y9.781 I2.104 J2.041 E.01658 G3 X-39.922 Y9.967 I.644 J1.624 E.05695 G2 X-38.939 Y10.905 I5.976 J-5.28 E.04511 G2 X-37.301 Y10.718 I.644 J-1.624 E.05695 G1 X-36.646 Y10.059 E.03084 G3 X-35.991 Y9.649 I.94 J.776 E.02607 G1 X-35.313 Y9.676 E.02251 G1 X-35.313 Y12.286 E.08656 G1 X-35.991 Y12.588 E.02463 G3 X-36.962 Y13.515 I-5.911 J-5.215 E.04459 G3 X-36.442 Y15.127 I-1.855 J1.487 E.05743 G3 X-35.991 Y14.891 I.579 J.557 E.0172 G1 X-35.313 Y14.917 E.02251 G1 X-35.313 Y17.527 E.08656 G1 X-35.991 Y17.829 E.02463 G1 X-36.644 Y18.487 E.03074 G1 X-38.704 Y18.487 E.06834 G2 X-39.595 Y17.643 I-5.384 J4.785 E.04074 G2 X-41.232 Y17.829 I-.644 J1.624 E.05695 G1 X-41.937 Y18.487 E.03197 G1 X-41.937 Y16.91 E.05231 G1 X-40.692 Y16.418 F30000 G1 F16200 G3 X-41.159 Y14.893 I2.211 J-1.511 E.05374 G2 X-41.937 Y15.349 I.408 J1.586 E.03032 G1 X-41.937 Y13.289 E.06833 G2 X-41.232 Y12.588 I-3.751 J-4.471 E.03302 G3 X-39.595 Y12.401 I.993 J1.437 E.05695 G3 X-39.261 Y12.685 I-1.491 J2.09 E.01453 G2 X-40.629 Y13.505 I.616 J2.578 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.983 Y12.951 G1 X-39.261 Y12.685 G1 X-39.551 Y12.439 ;WIPE_END G1 X-39.483 Y4.806 Z4.6 F30000 G1 X-39.352 Y-10.052 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z4.6 F30000 G1 X-42.652 Y-23.367 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z4.6 F30000 G1 X-51.352 Y-52.052 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:4.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.8 I-.531 J1.095 P1 F30000 G1 X49.654 Y-1.689 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.667 Y-1.691 E.00042 G1 X50 Y-1.758 E.01127 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.615 Y-1.681 E.00974 G1 X49.739 Y-1.262 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.752 Y-1.265 E.00039 G1 X50 Y-1.314 E.00778 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.7 Y-1.254 E.00636 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.752 Y-1.265 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.245 Y-.35 ;WIPE_END G1 X50.404 Y-2.112 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00051 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50 Y-2.15 I-.815 J-1.989 E.25149 G1 X50.365 Y-2.116 E.01215 G1 X50.447 Y-2.545 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.453 Y-2.544 E.00019 G1 X50.991 Y-2.392 E.01716 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.407 Y-2.549 E.01258 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.453 Y-2.544 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.072 Y-1.537 ;WIPE_END G1 X49.104 Y-8.569 Z4.8 F30000 G1 X30.752 Y-52.052 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z4.8 F30000 G1 X18.752 Y-10.052 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.624 Y-3.608 Z4.8 F30000 G1 X18.861 Y-.954 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.756 Y-.924 E.0036 G3 X17.645 Y-5.082 I-.562 J-2.077 E.22472 G1 X17.928 Y-5.136 E.00955 G3 X19.022 Y-1.015 I.266 J2.135 E.20491 G1 X18.898 Y-.968 E.0044 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.73 Y-1.34 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.317 E.00272 G3 X17.75 Y-4.687 I-.456 J-1.684 E.18214 G1 X17.98 Y-4.732 E.00778 G3 X18.867 Y-1.391 I.215 J1.731 E.16609 G1 X18.767 Y-1.354 E.00352 G1 X18.592 Y-1.756 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.538 Y-1.737 E.00175 G3 X17.861 Y-4.266 I-.342 J-1.264 E.12658 G1 X18.036 Y-4.3 E.00546 G3 X18.853 Y-1.868 I.161 J1.299 E.11016 G1 X18.629 Y-1.772 E.00751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.538 Y-1.737 G1 X18.371 Y-1.701 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.992 Y-2.521 ;WIPE_END G1 X17.311 Y5.104 Z4.8 F30000 G1 X17.813 Y17.115 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.643 Y17.079 E.00578 G3 X17.645 Y12.918 I.551 J-2.08 E.18736 G1 X17.928 Y12.864 E.00955 G3 X17.919 Y17.133 I.266 J2.135 E.24226 G1 X17.853 Y17.122 E.00223 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.893 Y16.716 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.685 E.00489 G3 X17.75 Y13.313 I.447 J-1.686 E.15186 G1 X17.98 Y13.268 E.00778 G3 X17.972 Y16.729 I.215 J1.731 E.19637 G1 X17.932 Y16.722 E.00135 G1 X17.978 Y16.289 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.861 Y16.265 E.00366 G3 X17.861 Y13.734 I.335 J-1.265 E.10552 G1 X18.036 Y13.7 E.00546 G3 X18.029 Y16.298 I.161 J1.299 E.13646 G1 X18.017 Y16.296 E.00037 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.861 Y16.265 G1 X17.699 Y16.211 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.17 G1 X16.901 Y14.871 ;WIPE_END G1 X16.057 Y7.285 Z4.8 F30000 G1 X14.502 Y-6.698 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 M73 P56 R34 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.455 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.827 E.05401 G1 X15.112 Y-5.091 E.01586 G1 X15.767 Y-5.95 E.03582 G1 X16.094 Y-6.202 E.01371 G3 X17.732 Y-5.671 I.259 J1.991 E.05903 G1 X17.976 Y-5.351 E.01334 G3 X19.808 Y-4.73 I.22 J2.362 E.06609 G1 X20.353 Y-5.091 E.02169 G1 X21.008 Y-5.95 E.03582 G1 X21.337 Y-6.202 E.01375 G1 X21.337 Y-6.487 E.00945 G1 X19.993 Y-6.487 E.04457 G1 X20.511 Y-3.482 F30000 G1 F16200 G3 X20.291 Y-1.903 I-2.602 J.442 E.05373 G2 X21.008 Y-2.192 I.069 J-.863 E.02658 G1 X21.337 Y-2.623 E.01798 G1 X21.337 Y-.961 E.05513 G1 X21.008 Y-.708 E.01375 G1 X20.353 Y.15 E.03582 G3 X18.715 Y.681 I-1.378 J-1.46 E.05903 G1 X18.387 Y.429 E.01371 G1 X17.732 Y-.429 E.03582 G2 X16.094 Y-.961 I-1.378 J1.46 E.05903 G1 X15.767 Y-.708 E.01371 G1 X15.112 Y.15 E.03582 G1 X14.713 Y.414 E.01586 G1 X14.713 Y-1.978 E.07936 G2 X15.915 Y-2.388 I.359 J-.914 E.04579 G3 X16.05 Y-3.977 I2.64 J-.577 E.05371 G1 X14.713 Y1.635 F30000 G1 F16200 G1 X14.713 Y3.263 E.05401 G2 X15.767 Y3.049 I.38 J-.833 E.03811 G1 X16.422 Y2.191 E.03582 G3 X17.732 Y1.609 I1.417 J1.424 E.04863 G3 X18.387 Y1.912 I.051 J.75 E.02498 G1 X19.043 Y2.771 E.03582 G2 X20.353 Y3.353 I1.417 J-1.424 E.04863 G2 X21.337 Y2.619 I-.179 J-1.266 E.04248 G1 X21.337 Y4.281 E.05513 G1 X21.008 Y4.533 E.01375 G1 X20.353 Y5.391 E.03582 G3 X19.043 Y5.973 I-1.417 J-1.424 E.04863 G3 X18.387 Y5.67 I-.051 J-.75 E.02498 G1 X17.732 Y4.812 E.03582 G2 X16.422 Y4.23 I-1.417 J1.424 E.04863 G2 X15.767 Y4.533 I-.051 J.75 E.02498 G1 X15.112 Y5.391 E.03582 G1 X14.713 Y5.656 E.01586 G1 X14.713 Y8.504 E.0945 G2 X15.767 Y8.291 I.38 J-.833 E.03811 G1 X16.422 Y7.432 E.03582 G3 X17.732 Y6.85 I1.417 J1.424 E.04863 G3 X18.387 Y7.154 I.051 J.75 E.02498 G1 X19.043 Y8.012 E.03582 G2 X20.353 Y8.594 I1.417 J-1.424 E.04863 G2 X21.337 Y7.86 I-.179 J-1.266 E.04248 G1 X21.337 Y9.522 E.05513 G1 X21.008 Y9.774 E.01375 G1 X20.353 Y10.632 E.03582 G3 X19.043 Y11.215 I-1.417 J-1.424 E.04863 G3 X18.387 Y10.911 I-.051 J-.75 E.02498 G1 X17.732 Y10.053 E.03582 G2 X16.422 Y9.471 I-1.417 J1.424 E.04863 G2 X15.767 Y9.774 I-.051 J.75 E.02498 G1 X15.112 Y10.632 E.03582 G1 X14.713 Y10.897 E.01586 G1 X14.713 Y12.525 E.05401 G1 X16.402 Y13.47 F30000 G1 F16200 G2 X15.837 Y14.962 I2.099 J1.648 E.05373 G1 X15.112 Y15.874 E.03866 G1 X14.713 Y16.138 E.01586 G1 X14.713 Y13.746 E.07936 G2 X15.767 Y13.532 I.38 J-.833 E.03811 G1 X16.422 Y12.674 E.03582 G3 X18.06 Y12.143 I1.378 J1.46 E.05903 G3 X18.599 Y12.672 I-.714 J1.267 E.02537 G3 X20.245 Y13.811 I-.412 J2.353 E.06849 G2 X21.008 Y13.532 I.132 J-.822 E.02816 G1 X21.337 Y13.101 E.01798 G1 X21.337 Y14.763 E.05513 G1 X21.008 Y15.015 E.01375 G1 X20.431 Y15.771 E.03152 G3 X19.434 Y17.015 I-2.475 J-.963 E.05373 G1 X20.665 Y18.487 F30000 G1 F16200 G1 X19.037 Y18.487 E.05401 G1 X18.387 Y17.636 E.0355 G2 X17.732 Y17.333 I-.604 J.446 E.02498 G2 X15.985 Y18.487 I.332 J2.402 E.07181 G1 X14.713 Y18.487 E.0422 G1 X14.713 Y18.131 E.01181 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.713 Y18.487 G1 X15.985 Y18.487 G1 X16.211 Y18.191 ;WIPE_END G1 X8.728 Y19.697 Z4.8 F30000 G1 X-2.945 Y22.045 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z4.8 F30000 G1 X-15.232 Y53.745 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z4.8 F30000 G1 X-5.6 Y52.94 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.259 J1.929 E.17717 G3 X-5.368 Y53.745 I-.496 J-1.895 E.0928 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.4889 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290585 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z4.8 F30000 G1 X-3.671 Y51.454 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.0316 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01244 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.631 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-8.015 Y46.426 Z4.8 F30000 G1 X-37.67 Y-1.17 Z4.8 G1 Z4.4 M73 P57 R34 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.726 Y-1.14 E.00212 G3 X-39.355 Y-5.082 I-1.08 J-1.861 E.24338 G1 X-39.072 Y-5.136 E.00955 G3 X-37.493 Y-1.296 I.266 J2.135 E.18626 G1 X-37.637 Y-1.193 E.00589 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.896 Y-1.508 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.492 E.00124 G3 X-39.25 Y-4.687 I-.875 J-1.509 E.19727 G1 X-39.02 Y-4.732 E.00778 G3 X-37.74 Y-1.619 I.215 J1.731 E.15097 G1 X-37.863 Y-1.531 E.00501 G1 X-38.138 Y-1.87 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.868 E.00029 G3 X-39.139 Y-4.266 I-.657 J-1.132 E.13709 G1 X-38.964 Y-4.3 E.00546 G3 X-38.005 Y-1.964 I.161 J1.299 E.10491 G1 X-38.105 Y-1.893 E.00376 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.868 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.8 Y-1.69 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.878 Y-2.26 ;WIPE_END G1 X-40.122 Y5.369 Z4.8 F30000 G1 X-40.474 Y16.352 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.51 Y16.312 E.00179 G3 X-39.355 Y12.918 I1.705 J-1.314 E.14058 G1 X-39.072 Y12.864 E.00955 G3 X-40.324 Y16.524 I.266 J2.135 E.28902 G1 X-40.447 Y16.382 E.00623 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.168 Y16.084 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.187 Y16.064 E.00091 G3 X-39.25 Y13.313 I1.382 J-1.065 E.11394 G1 X-39.02 Y13.268 E.00778 G3 X-40.035 Y16.235 I.215 J1.731 E.23427 G1 X-40.141 Y16.114 E.00535 G1 X-39.84 Y15.798 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.139 Y13.734 I1.037 J-.799 E.07917 G1 X-38.964 Y13.7 E.00546 G3 X-39.816 Y15.829 I.161 J1.299 E.16686 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.935 Y15.655 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.66 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.664 Y14.027 ;WIPE_END G1 X-38.023 Y6.573 Z4.8 F30000 G1 X-35.102 Y-6.698 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.824 Y-4.276 Z4.8 F30000 G1 X-41.937 Y-4.257 Z4.8 G1 Z4.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-5.885 E.05401 G3 X-41.56 Y-6.202 I.776 J.542 E.01652 G3 X-39.583 Y-5.227 I.284 J1.916 E.07777 G3 X-37.492 Y-4.965 I.764 J2.38 E.07219 G1 X-37.301 Y-5.091 E.00758 G1 X-36.646 Y-5.95 E.03582 G3 X-35.991 Y-6.253 I.604 J.446 E.02498 G1 X-35.313 Y-6.09 E.02313 G1 X-35.313 Y-3.49 E.08626 G2 X-36.529 Y-2.345 I1.622 J2.941 E.05599 G3 X-41.159 Y-3.099 I-2.27 J-.656 E.22737 G1 X-41.937 Y-2.154 E.04059 G1 X-41.937 Y-.644 E.05009 G3 X-41.56 Y-.961 I.776 J.542 E.01652 G3 X-39.922 Y-.429 I.259 J1.991 E.05903 G1 X-39.267 Y.429 E.03582 G1 X-38.939 Y.681 E.01371 G2 X-37.301 Y.15 I.259 J-1.991 E.05903 G1 X-36.646 Y-.708 E.03582 G3 X-35.991 Y-1.012 I.604 J.446 E.02498 G1 X-35.313 Y-.849 E.02313 G1 X-35.313 Y1.751 E.08626 G1 X-35.991 Y2.191 E.02681 G1 X-36.646 Y3.049 E.03582 G1 X-36.974 Y3.302 E.01371 G3 X-38.612 Y2.771 I-.259 J-1.991 E.05903 G1 X-39.267 Y1.912 E.03582 G1 X-39.595 Y1.66 E.01371 G2 X-41.232 Y2.191 I-.259 J1.991 E.05903 G1 X-41.937 Y3.087 E.03781 G1 X-41.937 Y4.597 E.05009 G3 X-41.56 Y4.281 I.776 J.542 E.01652 G3 X-39.922 Y4.812 I.259 J1.991 E.05903 G1 X-39.267 Y5.67 E.03582 G1 X-38.939 Y5.922 E.01371 G2 X-37.301 Y5.391 I.259 J-1.991 E.05903 G1 X-36.646 Y4.533 E.03582 G3 X-35.991 Y4.23 I.604 J.446 E.02498 G1 X-35.313 Y4.392 E.02313 G1 X-35.313 Y6.992 E.08626 G1 X-35.991 Y7.432 E.02681 G1 X-36.646 Y8.291 E.03582 G1 X-36.974 Y8.543 E.01371 G3 X-38.612 Y8.012 I-.259 J-1.991 E.05903 G1 X-39.267 Y7.154 E.03582 G1 X-39.595 Y6.901 E.01371 G2 X-41.232 Y7.432 I-.259 J1.991 E.05903 G1 X-41.937 Y8.329 E.03781 G1 X-41.937 Y9.839 E.05009 G3 X-41.56 Y9.522 I.776 J.542 E.01652 G3 X-39.922 Y10.053 I.259 J1.991 E.05903 G1 X-39.267 Y10.911 E.03582 G1 X-38.939 Y11.164 E.01371 G2 X-37.301 Y10.632 I.259 J-1.991 E.05903 G1 X-36.646 Y9.774 E.03582 G3 X-35.991 Y9.471 I.604 J.446 E.02498 G1 X-35.313 Y9.633 E.02313 G1 X-35.313 Y12.234 E.08626 G1 X-35.991 Y12.674 E.02681 G1 X-36.646 Y13.532 E.03582 G1 X-36.841 Y13.682 E.00816 G3 X-36.444 Y14.86 I-1.954 J1.315 E.04172 G3 X-35.991 Y14.712 I.361 J.339 E.01647 G1 X-35.313 Y14.875 E.02313 G1 X-35.313 Y17.475 E.08626 G2 X-36.428 Y18.487 I.859 J2.065 E.05093 G1 X-38.618 Y18.487 E.07264 G1 X-39.267 Y17.636 E.0355 G1 X-39.595 Y17.384 E.01371 G2 X-41.669 Y18.487 I-.24 J2.05 E.0829 G1 X-41.937 Y18.487 E.00889 G1 X-41.937 Y17.127 E.04513 G1 X-40.442 Y13.3 F30000 G1 F16200 G2 X-41.148 Y14.731 I1.685 J1.721 E.05396 G2 X-41.937 Y15.08 I-.111 J.815 E.03011 G1 X-41.937 Y13.57 E.05009 G1 X-41.232 Y12.674 E.03781 G3 X-39.595 Y12.143 I1.378 J1.46 E.05903 G3 X-39.071 Y12.652 I-.684 J1.227 E.02451 G3 X-37.518 Y13.017 I.193 J2.662 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-38.188 Y12.715 G1 X-39.071 Y12.652 G1 X-39.267 Y12.395 G1 X-39.312 Y12.36 ;WIPE_END G1 X-39.325 Y4.728 Z4.8 F30000 G1 X-39.352 Y-10.052 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z4.8 F30000 G1 X-42.652 Y-23.367 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z4.8 F30000 G1 X-51.352 Y-52.052 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:4.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5 I-.531 J1.095 P1 F30000 G1 X49.673 Y-1.693 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X49.68 Y-1.694 E.00022 G1 X50 Y-1.758 E.01083 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.634 Y-1.685 E.01037 G1 X49.758 Y-1.266 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.765 Y-1.267 E.00021 G1 X50 Y-1.314 E.00737 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01575 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.719 Y-1.258 E.00695 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.765 Y-1.267 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.248 Y-.331 ;WIPE_END G1 X50.402 Y-2.112 Z5 F30000 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.419 Y-2.111 E.00057 G3 X50 Y-2.152 I-.419 J2.105 E.43342 G1 X50.363 Y-2.116 E.01208 G1 X50.445 Y-2.545 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.45 Y-2.545 E.00016 G1 X50.991 Y-2.392 E.01727 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.405 Y-2.549 E.01251 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.45 Y-2.545 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.07 Y-1.539 ;WIPE_END G1 X49.103 Y-8.57 Z5 F30000 G1 X30.752 Y-52.052 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z5 F30000 G1 X18.752 Y-10.052 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.621 Y-3.607 Z5 F30000 G1 X18.856 Y-.953 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.922 E.00345 G3 X17.376 Y-4.99 I-.56 J-2.078 E.21522 G3 X17.934 Y-5.137 I.8 J1.912 E.0192 G3 X19.023 Y-1.013 I.263 J2.137 E.20493 G1 X18.894 Y-.966 E.00456 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.725 Y-1.338 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.317 E.00257 G3 X17.751 Y-4.688 I-.458 J-1.683 E.18235 G1 X17.985 Y-4.732 E.00792 G3 X18.866 Y-1.391 I.207 J1.732 E.16574 G1 X18.763 Y-1.352 E.00367 G1 X18.588 Y-1.754 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.538 Y-1.737 E.00161 G3 X17.862 Y-4.266 I-.344 J-1.263 E.1267 G1 X18.04 Y-4.3 E.00558 G3 X18.853 Y-1.869 I.154 J1.3 E.1099 G1 X18.624 Y-1.77 E.00765 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.538 Y-1.737 G1 X18.371 Y-1.701 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.99 Y-2.526 ;WIPE_END G1 X17.312 Y5.1 Z5 F30000 G1 X17.818 Y17.116 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.643 Y17.081 E.00595 G3 X17.647 Y12.918 I.548 J-2.081 E.18762 G1 X17.934 Y12.863 E.00969 G3 X17.919 Y17.134 I.257 J2.136 E.24185 G1 X17.858 Y17.123 E.00207 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.898 Y16.717 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.687 E.00507 G3 X17.751 Y13.312 I.444 J-1.687 E.15206 G1 X17.985 Y13.268 E.00792 G3 X17.972 Y16.73 I.207 J1.732 E.19602 G1 X17.937 Y16.724 E.00118 G1 X17.983 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.861 Y16.265 E.00382 G3 X17.862 Y13.734 I.334 J-1.266 E.10565 G1 X18.04 Y13.7 E.00558 G3 X18.029 Y16.298 I.154 J1.3 E.13621 G1 X18.022 Y16.297 E.00022 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.861 Y16.265 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.989 Y15.501 G1 X16.901 Y15.171 G1 X16.901 Y14.876 ;WIPE_END G1 X16.057 Y7.29 Z5 F30000 G1 X14.502 Y-6.698 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.947 Y-3.709 Z5 F30000 G1 Z4.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X16.004 Y-2.105 I2.37 J.719 E.0542 G2 X15.981 Y-1.45 I.607 J.35 E.02263 G3 X17.867 Y-.14 I-.94 J3.367 E.07765 G3 X18.243 Y.843 I-3.555 J1.923 E.035 G1 X18.173 Y1.171 E.01111 G2 X16.854 Y1.826 I2.438 J6.569 E.04897 G2 X15.911 Y3.464 I2.367 J2.453 E.06352 G1 X15.981 Y3.791 E.01111 G3 X17.3 Y4.446 I-2.438 J6.569 E.04897 G3 X18.243 Y6.084 I-2.367 J2.453 E.06352 G1 X18.173 Y6.412 E.01111 G2 X16.854 Y7.067 I2.438 J6.569 E.04897 G2 X15.911 Y8.705 I2.367 J2.453 E.06352 G1 X15.981 Y9.032 E.01111 G3 X17.3 Y9.688 I-2.438 J6.569 E.04897 G3 X18.243 Y11.326 I-2.367 J2.453 E.06352 G1 X18.173 Y11.653 E.01111 G2 X16.854 Y12.308 I2.438 J6.569 E.04897 G2 X15.911 Y13.946 I2.367 J2.453 E.06352 G1 X15.97 Y14.225 E.00945 G3 X16.126 Y13.869 I1.43 J.413 E.01292 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X15.97 Y14.225 G1 X15.911 Y13.946 G1 X16.287 Y12.963 G1 X16.466 Y12.756 ;WIPE_END G1 X20.78 Y18.487 Z5 F30000 G1 Z4.6 G1 E.8 F1800 G1 F16200 G1 X19.151 Y18.487 E.05401 G3 X18.563 Y17.335 I2.454 J-1.978 E.04322 G3 X17.418 Y17.227 I-.356 J-2.376 E.03855 G1 X16.854 Y17.55 E.02155 G1 X16.287 Y18.205 E.02874 G1 X16.165 Y18.487 E.01019 G1 X14.713 Y18.487 E.04815 G1 X14.713 Y16.201 E.07583 G2 X15.623 Y14.601 I-2.358 J-2.4 E.06182 G1 X15.553 Y14.274 E.01111 G3 X14.713 Y13.893 I1.381 J-4.161 E.03064 G1 X14.713 Y10.96 E.09731 G2 X15.623 Y9.36 I-2.358 J-2.4 E.06182 G1 X15.553 Y9.032 E.01111 G3 X14.713 Y8.652 I1.381 J-4.161 E.03064 G1 X14.713 Y5.718 E.09731 G2 X15.623 Y4.119 I-2.358 J-2.4 E.06182 G1 X15.553 Y3.791 E.01111 G3 X14.713 Y3.41 I1.381 J-4.161 E.03064 G1 X14.713 Y.477 E.09731 G2 X15.623 Y-1.123 I-2.358 J-2.4 E.06182 G1 X15.553 Y-1.45 E.01111 G3 X14.713 Y-1.831 I1.381 J-4.161 E.03064 G1 X14.713 Y-4.764 E.09731 G2 X15.596 Y-6.487 I-1.555 J-1.885 E.06602 G1 X16.447 Y-6.487 E.0282 G3 X17.907 Y-5.347 I-1.127 J2.949 E.06238 G3 X19.855 Y-4.688 I.28 J2.384 E.0705 G1 X19.921 Y-4.726 E.00252 G2 X20.838 Y-6.487 I-1.583 J-1.943 E.06771 G1 X21.337 Y-6.487 E.01656 G1 X21.337 Y-2.318 E.13829 G2 X21.222 Y-1.45 I.97 J.57 E.02983 G1 X21.337 Y-1.4 E.00417 G1 X21.337 Y2.923 E.1434 G2 X21.222 Y3.791 I.97 J.57 E.02983 G1 X21.337 Y3.842 E.00417 G1 X21.337 Y8.165 E.1434 G2 X21.222 Y9.032 I.97 J.57 E.02983 G1 X21.337 Y9.083 E.00417 G1 X21.337 Y13.406 E.1434 G2 X21.222 Y14.274 I.97 J.57 E.02983 G1 X21.337 Y14.324 E.00417 G1 X21.337 Y15.953 E.05401 G1 X19.607 Y16.899 F30000 G1 F16200 G2 X20.493 Y15.573 I-1.446 J-1.926 E.05395 G2 X20.864 Y14.601 I-3.514 J-1.898 E.03458 G1 X20.794 Y14.274 E.01111 G1 X20.386 Y14.095 E.0148 G2 X18.799 Y12.712 I-2.322 J1.064 E.07196 G3 X18.601 Y11.653 I1.092 J-.752 E.0368 G2 X19.921 Y10.998 I-2.438 J-6.569 E.04897 G2 X20.864 Y9.36 I-2.367 J-2.453 E.06352 G1 X20.794 Y9.032 E.01111 G3 X19.474 Y8.377 I2.438 J-6.569 E.04897 G3 X18.531 Y6.739 I2.367 J-2.453 E.06352 G1 X18.601 Y6.412 E.01111 G2 X19.921 Y5.757 I-2.438 J-6.569 E.04897 G2 X20.864 Y4.119 I-2.367 J-2.453 E.06352 G1 X20.794 Y3.791 E.01111 G3 X19.474 Y3.136 I2.438 J-6.569 E.04897 G3 X18.531 Y1.498 I2.367 J-2.453 E.06352 G1 X18.601 Y1.171 E.01111 G2 X19.921 Y.515 I-2.438 J-6.569 E.04897 G2 X20.864 Y-1.123 I-2.367 J-2.453 E.06352 G1 X20.794 Y-1.45 E.01111 G1 X20.183 Y-1.718 E.02214 G2 X20.548 Y-3.271 I-2.298 J-1.36 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.485 Y-2.388 G1 X20.183 Y-1.718 G1 X20.531 Y-1.566 ;WIPE_END G1 X15.149 Y3.847 Z5 F30000 G1 X-2.945 Y22.045 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z5 F30000 G1 X-15.232 Y53.745 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z5 F30000 G1 X-5.6 Y52.94 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27035 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290588 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01245 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z5 F30000 G1 X-3.671 Y51.454 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01244 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01244 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-8.015 Y46.426 Z5 F30000 G1 X-37.67 Y-1.17 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.137 E.0021 G3 X-39.624 Y-4.99 I-1.079 J-1.863 E.2339 G3 X-39.066 Y-5.137 I.8 J1.912 E.0192 G3 X-37.491 Y-1.294 I.263 J2.137 E.18625 G1 X-37.637 Y-1.192 E.00591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.896 Y-1.508 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.93 Y-1.493 E.00122 G3 X-39.249 Y-4.688 I-.878 J-1.508 E.19747 G1 X-39.015 Y-4.732 E.00792 G3 X-37.741 Y-1.62 I.207 J1.732 E.15062 G1 X-37.864 Y-1.531 E.00502 G1 X-38.135 Y-1.873 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.869 E.00039 G3 X-39.138 Y-4.266 I-.658 J-1.131 E.13722 G1 X-38.96 Y-4.3 E.00558 G3 X-37.877 Y-2.077 I.154 J1.3 E.0994 G1 X-38.104 Y-1.898 E.00888 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.869 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.8 Y-1.69 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.727 Y-2.073 G1 X-39.871 Y-2.261 ;WIPE_END G1 X-40.118 Y5.367 Z5 F30000 G1 X-40.473 Y16.352 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.513 Y16.314 E.00182 G3 X-39.353 Y12.918 I1.704 J-1.315 E.1408 G1 X-39.066 Y12.863 E.00969 G3 X-40.326 Y16.526 I.257 J2.136 E.28864 G1 X-40.447 Y16.383 E.00623 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.167 Y16.084 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.188 Y16.065 E.00094 G3 X-39.249 Y13.312 I1.381 J-1.066 E.1141 G1 X-39.015 Y13.268 E.00792 G3 X-40.037 Y16.237 I.207 J1.732 E.23395 G1 X-40.141 Y16.114 E.00534 G1 X-39.842 Y15.799 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.138 Y13.734 I1.036 J-.8 E.07927 G1 X-38.96 Y13.7 E.00558 G3 X-39.817 Y15.831 I.154 J1.3 E.16663 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.935 Y15.654 G1 X-40.066 Y15.339 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.661 G1 X-40.011 Y14.499 G1 X-39.84 Y14.202 G1 X-39.664 Y14.027 ;WIPE_END G1 X-38.023 Y6.573 Z5 F30000 G1 X-35.102 Y-6.698 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.929 Y-5.588 Z5 F30000 G1 X-41.937 Y-5.588 Z5 G1 Z4.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-6.487 E.02982 G1 X-41.208 Y-6.487 E.02419 G3 X-39.787 Y-5.381 I-1.1 J2.88 E.06061 G1 X-39.703 Y-5.187 E.00703 G3 X-37.514 Y-4.98 I.882 J2.349 E.07551 G2 X-36.817 Y-6.487 I-1.399 J-1.562 E.05664 G1 X-35.966 Y-6.487 E.0282 G3 X-35.313 Y-6.151 I-1.262 J3.257 E.02441 G1 X-35.313 Y-3.556 E.08607 G1 X-35.559 Y-3.416 E.00941 G2 X-36.502 Y-1.778 I2.367 J2.453 E.06352 G1 X-36.432 Y-1.45 E.01111 G3 X-35.313 Y-.91 I-1.997 J5.563 E.04131 G1 X-35.313 Y1.685 E.08607 G1 X-35.559 Y1.826 E.00941 G2 X-36.502 Y3.464 I2.367 J2.453 E.06352 G1 X-36.432 Y3.791 E.01111 G3 X-35.313 Y4.332 I-1.997 J5.563 E.04131 G1 X-35.313 Y6.926 E.08607 G1 X-35.559 Y7.067 E.00941 G2 X-36.502 Y8.705 I2.367 J2.453 E.06352 G1 X-36.432 Y9.032 E.01111 G3 X-35.313 Y9.573 I-1.997 J5.563 E.04131 G1 X-35.313 Y12.168 E.08607 G1 X-35.559 Y12.308 E.00941 G2 X-36.502 Y13.946 I2.367 J2.453 E.06352 G1 X-36.432 Y14.274 E.01111 G3 X-35.313 Y14.814 I-1.997 J5.563 E.04131 G1 X-35.313 Y17.409 E.08607 G1 X-35.559 Y17.55 E.00941 G1 X-36.126 Y18.205 E.02874 G1 X-36.248 Y18.487 E.01019 G1 X-38.503 Y18.487 E.07479 G3 X-39.087 Y17.347 I2.451 J-1.977 E.04279 G3 X-39.912 Y17.084 I.947 J-4.389 E.02876 G2 X-41.368 Y18.205 I1.088 J2.918 E.06186 G1 X-41.49 Y18.487 E.01019 G1 X-41.937 Y18.487 E.01484 G1 X-41.937 Y17.306 E.03917 G1 X-38.344 Y-.684 F30000 G1 F16200 G2 X-36.975 Y-1.501 I-.609 J-2.577 E.05373 G1 X-36.86 Y-1.45 E.00416 G3 X-36.883 Y-.795 I-.63 J.306 E.02263 G3 X-38.307 Y.843 I-2.674 J-.886 E.07389 G1 X-39.053 Y1.171 E.02704 G2 X-39.03 Y1.826 I.63 J.306 E.02263 G2 X-37.607 Y3.464 I2.674 J-.886 E.07389 G1 X-36.86 Y3.791 E.02704 G3 X-36.883 Y4.446 I-.63 J.306 E.02263 G3 X-38.307 Y6.084 I-2.674 J-.886 E.07389 G1 X-39.053 Y6.412 E.02704 G2 X-39.03 Y7.067 I.63 J.306 E.02263 G2 X-37.607 Y8.705 I2.674 J-.886 E.07389 G1 X-36.86 Y9.032 E.02704 G3 X-36.883 Y9.688 I-.63 J.306 E.02263 G3 X-38.307 Y11.326 I-2.674 J-.886 E.07389 G1 X-39.053 Y11.653 E.02704 G2 X-38.887 Y12.64 I1.209 J.304 E.03416 G2 X-41.112 Y14.52 I.089 J2.362 E.10412 G1 X-41.674 Y14.274 E.02036 G3 X-41.651 Y13.619 I.63 J-.306 E.02263 G3 X-40.227 Y11.981 I2.674 J.886 E.07389 G1 X-39.481 Y11.653 E.02704 G2 X-39.504 Y10.998 I-.63 J-.306 E.02263 G2 X-40.927 Y9.36 I-2.674 J.886 E.07389 G1 X-41.674 Y9.032 E.02704 G3 X-41.651 Y8.377 I.63 J-.306 E.02263 G3 X-40.227 Y6.739 I2.674 J.886 E.07389 G1 X-39.481 Y6.412 E.02704 G2 X-39.504 Y5.757 I-.63 J-.306 E.02263 G2 X-40.927 Y4.119 I-2.674 J.886 E.07389 G1 X-41.674 Y3.791 E.02704 G3 X-41.651 Y3.136 I.63 J-.306 E.02263 G3 X-40.227 Y1.498 I2.674 J.886 E.07389 G1 X-39.481 Y1.171 E.02704 G2 X-39.504 Y.515 I-.63 J-.306 E.02263 G2 X-40.927 Y-1.123 I-2.674 J.886 E.07389 G1 X-41.674 Y-1.45 E.02704 G3 X-41.651 Y-2.105 I.63 J-.306 E.02263 G3 X-41.164 Y-2.996 I1.654 J.325 E.03421 G2 X-40.621 Y-1.496 I2.679 J-.121 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.986 Y-2.095 G1 X-41.147 Y-2.697 G1 X-41.164 Y-2.996 G1 X-41.368 Y-2.76 G1 X-41.393 Y-2.702 ;WIPE_END G1 X-39.352 Y-10.052 Z5 F30000 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z5 F30000 G1 X-42.652 Y-23.367 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z5 F30000 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z5 F30000 G1 X-51.352 Y-52.052 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:4.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.2 I-.531 J1.095 P1 F30000 G1 X49.693 Y-1.697 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.01039 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.654 Y-1.689 E.01103 G1 X49.777 Y-1.27 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X49.778 Y-1.27 E.00001 G1 X50 Y-1.314 E.00696 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.738 Y-1.262 E.00755 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.778 Y-1.27 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.252 Y-.312 ;WIPE_END G1 X50.4 Y-2.112 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.404 Y-2.112 E.00013 G1 X50.42 Y-2.111 E.00053 G3 X50 Y-2.152 I-.419 J2.105 E.43341 G1 X50.36 Y-2.116 E.01201 G1 X50.443 Y-2.545 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.447 Y-2.545 E.00012 G1 X50.991 Y-2.392 E.01737 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.403 Y-2.549 E.01244 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.447 Y-2.545 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.069 Y-1.54 ;WIPE_END G1 X49.102 Y-8.572 Z5.2 F30000 G1 X30.752 Y-52.052 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z5.2 F30000 G1 X18.752 Y-10.052 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.618 Y-3.607 Z5.2 F30000 G1 X18.852 Y-.951 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.922 E.0033 G3 X17.376 Y-4.99 I-.562 J-2.078 E.21527 G3 X17.939 Y-5.137 I.793 J1.887 E.01939 G3 X19.023 Y-1.013 I.256 J2.137 E.20464 G1 X18.889 Y-.965 E.00471 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.721 Y-1.337 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.317 E.00241 G3 X17.752 Y-4.688 I-.461 J-1.682 E.18255 G1 X17.99 Y-4.733 E.00805 G3 X18.866 Y-1.392 I.2 J1.733 E.1654 G1 X18.758 Y-1.351 E.00382 G1 X18.583 Y-1.752 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.538 Y-1.737 E.00145 G3 X17.862 Y-4.266 I-.346 J-1.262 E.12682 G1 X18.045 Y-4.3 E.00571 G3 X18.853 Y-1.869 I.148 J1.3 E.10966 G1 X18.62 Y-1.768 E.0078 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.538 Y-1.737 G1 X18.371 Y-1.701 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.988 Y-2.531 ;WIPE_END G1 X17.313 Y5.095 Z5.2 F30000 G1 X17.826 Y17.117 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.643 Y17.08 E.00619 G3 X17.376 Y13.01 I.553 J-2.08 E.17788 G3 X17.939 Y12.863 I.793 J1.888 E.01939 G3 X17.919 Y17.135 I.256 J2.137 E.24201 G1 X17.865 Y17.125 E.00182 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.905 Y16.718 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.688 E.00531 G3 X17.752 Y13.312 I.442 J-1.687 E.15224 G1 X17.99 Y13.267 E.00805 G3 X17.972 Y16.731 I.2 J1.733 E.19568 G1 X17.944 Y16.726 E.00094 G1 X17.99 Y16.291 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.861 Y16.266 E.00405 G3 X17.862 Y13.734 I.332 J-1.266 E.10576 G1 X18.045 Y13.7 E.00571 G3 X18.029 Y16.299 I.148 J1.3 E.13595 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.861 Y16.266 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.989 Y15.501 G1 X16.901 Y15.171 G1 X16.901 Y14.883 ;WIPE_END G1 X16.058 Y7.298 Z5.2 F30000 G1 X14.502 Y-6.698 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X21.337 Y-5.816 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-6.487 E.02226 G1 X20.38 Y-6.487 E.03175 G1 X20.477 Y-6.364 E.00519 G3 X19.999 Y-4.726 I-1.91 J.331 E.05861 G1 X19.897 Y-4.645 E.0043 G2 X17.804 Y-5.327 I-1.697 J1.656 E.07594 G2 X16.813 Y-6.487 I-2.651 J1.261 E.05121 G1 X15.138 Y-6.487 E.05554 G1 X15.235 Y-6.364 E.00519 G3 X14.757 Y-4.726 I-1.91 J.331 E.05861 G1 X14.713 Y-4.691 E.00187 G1 X14.713 Y-1.661 E.10051 G3 X15.235 Y-1.123 I-.885 J1.381 E.02509 G3 X14.757 Y.515 I-1.91 J.331 E.05861 G1 X14.713 Y.551 E.00187 G1 X14.713 Y3.581 E.10051 G3 X15.235 Y4.119 I-.885 J1.381 E.02509 G3 X14.757 Y5.757 I-1.91 J.331 E.05861 G1 X14.713 Y5.792 E.00187 G1 X14.713 Y8.822 E.10051 G3 X15.235 Y9.36 I-.885 J1.381 E.02509 G3 X14.757 Y10.998 I-1.91 J.331 E.05861 G1 X14.713 Y11.033 E.00187 G1 X14.713 Y14.063 E.10051 G3 X15.235 Y14.601 I-.885 J1.381 E.02509 G3 X14.757 Y16.239 I-1.91 J.331 E.05861 G1 X14.713 Y16.274 E.00187 G1 X14.713 Y18.487 E.07339 G1 X16.306 Y18.487 E.05283 G3 X17.256 Y17.167 I2.216 J.593 E.05516 G2 X18.913 Y17.251 I.942 J-2.193 E.0562 G1 X18.854 Y17.55 E.0101 G1 X18.981 Y18.205 E.02214 G1 X19.16 Y18.487 E.01108 G1 X20.789 Y18.487 E.05401 G1 X20.198 Y13.741 F30000 G1 F16200 G2 X18.941 Y12.759 I-2.181 J1.496 E.05373 G3 X19.177 Y11.653 I.886 J-.389 E.04004 G1 X19.999 Y10.998 E.03486 G2 X20.542 Y9.688 I-1.406 J-1.35 E.04816 G2 X20.219 Y9.032 I-.805 J-.01 E.02515 G1 X19.397 Y8.377 E.03486 G3 X18.854 Y7.067 I1.406 J-1.35 E.04816 G3 X19.177 Y6.412 I.805 J-.01 E.02515 G1 X19.999 Y5.757 E.03486 G2 X20.542 Y4.446 I-1.406 J-1.35 E.04816 G2 X20.219 Y3.791 I-.805 J-.01 E.02515 G1 X19.397 Y3.136 E.03486 G3 X18.854 Y1.826 I1.406 J-1.35 E.04816 G3 X19.177 Y1.171 I.805 J-.01 E.02515 G1 X19.999 Y.515 E.03486 G2 X20.542 Y-.795 I-1.406 J-1.35 E.04816 G2 X20.078 Y-1.562 I-1.145 J.168 E.03052 G3 X17.385 Y-.784 I-1.879 J-1.454 E.09946 G3 X17.921 Y.515 I-1.395 J1.335 E.0477 G3 X17.598 Y1.171 I-.805 J.01 E.02515 G1 X16.776 Y1.826 E.03486 G2 X16.233 Y3.136 I1.406 J1.35 E.04816 G2 X16.556 Y3.791 I.805 J.01 E.02515 G1 X17.378 Y4.446 E.03486 G3 X17.921 Y5.757 I-1.406 J1.35 E.04816 G3 X17.598 Y6.412 I-.805 J.01 E.02515 G1 X16.776 Y7.067 E.03486 G2 X16.233 Y8.377 I1.406 J1.35 E.04816 G2 X16.556 Y9.032 I.805 J.01 E.02515 G1 X17.378 Y9.688 E.03486 G3 X17.921 Y10.998 I-1.406 J1.35 E.04816 G3 X17.598 Y11.653 I-.805 J.01 E.02515 G1 X16.776 Y12.308 E.03486 G2 X16.233 Y13.619 I1.406 J1.35 E.04816 G2 X15.849 Y15.222 I2.498 J1.446 E.05545 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X15.915 Y14.388 G1 X16.233 Y13.619 G1 X16.296 Y13.294 ;WIPE_END G1 X9.349 Y16.454 Z5.2 F30000 G1 X-2.945 Y22.045 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z5.2 F30000 G1 X-15.232 Y53.745 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z5.2 F30000 G1 X-5.6 Y52.94 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27034 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.147 Y54.068 I2.672 J.796 E.48003 G1 X-6.241 Y53.79 E.00901 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 M73 P58 R34 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290582 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z5.2 F30000 G1 X-3.671 Y51.454 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01244 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-8.015 Y46.426 Z5.2 F30000 G1 X-37.671 Y-1.169 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00208 G3 X-39.624 Y-4.99 I-1.08 J-1.862 E.23395 G3 X-39.061 Y-5.137 I.793 J1.888 E.01939 G3 X-37.491 Y-1.295 I.256 J2.137 E.18597 G1 X-37.638 Y-1.192 E.00593 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.897 Y-1.508 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.93 Y-1.493 E.00121 G3 X-39.248 Y-4.688 I-.88 J-1.506 E.19766 M73 P58 R33 G1 X-39.01 Y-4.733 E.00805 G3 X-37.742 Y-1.621 I.2 J1.733 E.15029 G1 X-37.864 Y-1.531 E.00504 G1 X-38.138 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.869 E.00027 G3 X-39.138 Y-4.266 I-.66 J-1.13 E.13733 G1 X-38.955 Y-4.3 E.00571 G3 X-38.006 Y-1.965 I.148 J1.3 E.10441 G1 X-38.106 Y-1.893 E.00379 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.869 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.8 Y-1.69 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.879 Y-2.261 ;WIPE_END G1 X-40.122 Y5.368 Z5.2 F30000 G1 X-40.473 Y16.353 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.511 Y16.313 E.00183 G3 X-39.624 Y13.01 I1.706 J-1.313 E.1311 G3 X-39.061 Y12.863 I.793 J1.888 E.01939 G3 X-40.324 Y16.524 I.256 J2.137 E.28879 G1 X-40.447 Y16.383 E.0062 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.167 Y16.084 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.19 Y16.067 E.00097 G3 X-39.248 Y13.312 I1.381 J-1.066 E.11426 G1 X-39.01 Y13.267 E.00805 G3 X-40.039 Y16.239 I.2 J1.733 E.2337 G1 X-40.141 Y16.115 E.00533 G1 X-39.843 Y15.8 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.138 Y13.734 I1.036 J-.8 E.07935 G1 X-38.955 Y13.7 E.00571 G3 X-39.818 Y15.831 I.148 J1.3 E.16641 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.936 Y15.654 G1 X-40.066 Y15.339 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.661 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.664 Y14.027 ;WIPE_END G1 X-38.023 Y6.573 Z5.2 F30000 G1 X-35.102 Y-6.698 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.471 Y-2.607 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-37.252 Y-1.217 I-2.59 J-.541 E.05373 G3 X-37.113 Y-.795 I-.345 J.348 E.01531 G3 X-37.656 Y.515 I-1.949 J-.04 E.04816 G1 X-38.478 Y1.171 E.03486 G2 X-38.801 Y1.826 I.482 J.645 E.02515 G2 X-38.258 Y3.136 I1.949 J-.04 E.04816 G1 X-37.436 Y3.791 E.03486 G3 X-37.113 Y4.446 I-.482 J.645 E.02515 G3 X-37.656 Y5.757 I-1.949 J-.04 E.04816 G1 X-38.478 Y6.412 E.03486 G2 X-38.801 Y7.067 I.482 J.645 E.02515 G2 X-38.258 Y8.377 I1.949 J-.04 E.04816 G1 X-37.436 Y9.032 E.03486 G3 X-37.113 Y9.688 I-.482 J.645 E.02515 G3 X-37.656 Y10.998 I-1.949 J-.04 E.04816 G1 X-38.478 Y11.653 E.03486 G2 X-38.736 Y12.638 I.593 J.682 E.03589 G2 X-41.058 Y14.306 I-.059 J2.367 E.10179 G3 X-41.421 Y13.619 I.801 J-.864 E.0263 G3 X-40.878 Y12.308 I1.949 J.04 E.04816 G1 X-40.056 Y11.653 E.03486 G2 X-39.733 Y10.998 I-.482 J-.645 E.02515 G2 X-40.276 Y9.688 I-1.949 J.04 E.04816 G1 X-41.098 Y9.032 E.03486 G3 X-41.421 Y8.377 I.482 J-.645 E.02515 G3 X-40.878 Y7.067 I1.949 J.04 E.04816 G1 X-40.056 Y6.412 E.03486 G2 X-39.733 Y5.757 I-.482 J-.645 E.02515 G2 X-40.276 Y4.446 I-1.949 J.04 E.04816 G1 X-41.098 Y3.791 E.03486 G3 X-41.421 Y3.136 I.482 J-.645 E.02515 G3 X-40.878 Y1.826 I1.949 J.04 E.04816 G1 X-40.056 Y1.171 E.03486 G2 X-39.733 Y.515 I-.482 J-.645 E.02515 G2 X-40.276 Y-.795 I-1.949 J.04 E.04816 G1 X-41.098 Y-1.45 E.03486 G3 X-41.421 Y-2.105 I.482 J-.645 E.02515 G1 X-41.294 Y-2.76 E.02214 G2 X-41.146 Y-3.309 I-.47 J-.421 E.01954 G3 X-40.646 Y-4.475 I2.439 J.354 E.04256 G1 X-41.937 Y-5.954 F30000 G1 F16200 G1 X-41.937 Y-6.487 E.01768 G1 X-40.842 Y-6.487 E.03633 G3 X-39.813 Y-5.133 I-1.265 J2.029 E.05767 G3 X-37.5 Y-4.971 I1.012 J2.134 E.08036 G2 X-37.178 Y-6.364 I-1.417 J-1.062 E.04882 G1 X-37.275 Y-6.487 E.00519 G1 X-35.6 Y-6.487 E.05554 G1 X-35.313 Y-6.258 E.01218 G1 X-35.313 Y-3.674 E.08572 G1 X-35.637 Y-3.416 E.01374 G2 X-36.115 Y-1.778 I1.432 J1.307 E.05861 G2 X-35.313 Y-1.017 I2.021 J-1.327 E.037 G1 X-35.313 Y1.568 E.08572 G1 X-35.637 Y1.826 E.01374 G2 X-36.115 Y3.464 I1.432 J1.307 E.05861 G2 X-35.313 Y4.225 I2.021 J-1.327 E.037 G1 X-35.313 Y6.809 E.08572 G1 X-35.637 Y7.067 E.01374 G2 X-36.115 Y8.705 I1.432 J1.307 E.05861 G2 X-35.313 Y9.466 I2.021 J-1.327 E.037 G1 X-35.313 Y12.05 E.08572 G1 X-35.637 Y12.308 E.01374 G2 X-36.115 Y13.946 I1.432 J1.307 E.05861 G2 X-35.313 Y14.707 I2.021 J-1.327 E.037 G1 X-35.313 Y17.291 E.08572 G1 X-35.637 Y17.55 E.01374 G1 X-36.052 Y18.205 E.02573 G1 X-36.107 Y18.487 E.00953 G1 X-38.494 Y18.487 E.07917 G1 X-38.673 Y18.205 E.01108 G1 X-38.801 Y17.55 E.02214 G1 X-38.764 Y17.363 E.0063 G3 X-40.128 Y16.952 I.092 J-2.773 E.04782 G1 X-40.878 Y17.55 E.03181 G1 X-41.294 Y18.205 E.02573 G1 X-41.349 Y18.487 E.00953 G1 X-41.937 Y18.487 E.01952 G1 X-41.937 Y17.447 E.0345 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.937 Y18.487 G1 X-41.349 Y18.487 G1 X-41.294 Y18.205 G1 X-41.248 Y18.134 ;WIPE_END G1 X-40.736 Y10.518 Z5.2 F30000 G1 X-39.352 Y-10.052 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z5.2 F30000 G1 X-42.652 Y-23.367 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z5.2 F30000 G1 X-51.352 Y-52.052 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:5 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;5 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.4 I-.53 J1.095 P1 F30000 G1 X49.712 Y-1.7 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00973 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.673 Y-1.693 E.01169 G1 X49.797 Y-1.274 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00636 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.758 Y-1.266 E.00817 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.256 Y-.292 ;WIPE_END G1 X50.398 Y-2.113 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.401 Y-2.112 E.00008 G1 X50.42 Y-2.111 E.00064 G3 X50 Y-2.152 I-.419 J2.105 E.43341 G1 X50.358 Y-2.117 E.01194 G1 X50.441 Y-2.546 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.443 Y-2.545 E.00008 G1 X50.991 Y-2.392 E.01747 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.401 Y-2.549 E.01238 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.443 Y-2.545 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.068 Y-1.542 ;WIPE_END G1 X49.1 Y-8.574 Z5.4 F30000 G1 X30.752 Y-52.052 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z5.4 F30000 G1 X18.752 Y-10.052 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.614 Y-3.607 Z5.4 F30000 G1 X18.847 Y-.949 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.922 E.00313 G3 X17.376 Y-4.99 I-.563 J-2.078 E.21534 G3 X17.945 Y-5.138 I.786 J1.866 E.01958 G3 X19.023 Y-1.013 I.249 J2.138 E.20437 G1 X18.885 Y-.963 E.00487 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.716 Y-1.335 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.316 E.00225 G3 X17.532 Y-4.613 I-.456 J-1.684 E.17457 G3 X17.995 Y-4.733 I.639 J1.519 E.01594 G3 X18.867 Y-1.39 I.2 J1.733 E.16557 G1 X18.754 Y-1.349 E.00399 G1 X18.578 Y-1.75 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.538 Y-1.737 E.00129 G3 X17.862 Y-4.266 I-.347 J-1.262 E.12692 G1 X18.049 Y-4.301 E.00583 G3 X18.852 Y-1.87 I.142 J1.301 E.10943 G1 X18.615 Y-1.766 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.538 Y-1.737 G1 X18.371 Y-1.701 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.986 Y-2.535 ;WIPE_END G1 X17.316 Y5.09 Z5.4 F30000 G1 X17.837 Y17.12 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.642 Y17.081 E.00657 G3 X17.376 Y13.01 I.552 J-2.081 E.17795 G3 X17.945 Y12.862 I.786 J1.866 E.01958 G3 X17.919 Y17.135 I.249 J2.138 E.24175 G1 X17.876 Y17.127 E.00145 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.916 Y16.72 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.687 E.00569 G3 X17.532 Y13.387 I.447 J-1.687 E.14426 G3 X17.995 Y13.267 I.639 J1.52 E.01594 G3 X17.972 Y16.731 I.2 J1.733 E.19587 G1 X17.955 Y16.728 E.00056 G1 X18.001 Y16.294 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.861 Y16.267 E.00439 G3 X17.862 Y13.734 I.331 J-1.266 E.10585 G1 X18.049 Y13.699 E.00583 G3 X18.04 Y16.301 I.142 J1.301 E.13538 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.861 Y16.267 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.064 Y15.654 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.895 ;WIPE_END G1 X16.058 Y7.309 Z5.4 F30000 G1 X14.502 Y-6.698 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X21.337 Y-6.071 Z5.4 F30000 G1 Z5 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-6.487 E.01381 G1 X20.125 Y-6.487 E.04021 G1 X20.23 Y-6.364 E.00537 G3 X20.086 Y-4.726 I-1.599 J.685 E.05681 G1 X19.949 Y-4.586 E.00649 G2 X17.75 Y-5.316 I-1.747 J1.584 E.08036 G2 X17.025 Y-6.487 I-2.289 J.608 E.04634 G1 X14.883 Y-6.487 E.07104 G1 X14.989 Y-6.364 E.00537 G3 X14.845 Y-4.726 I-1.599 J.685 E.05681 G1 X14.713 Y-4.591 E.00624 G1 X14.713 Y-1.445 E.10438 G1 X14.989 Y-1.123 E.01406 G3 X14.845 Y.515 I-1.599 J.685 E.05681 G1 X14.713 Y.65 E.00624 G1 X14.713 Y3.797 E.10438 G1 X14.989 Y4.119 E.01406 G3 X14.845 Y5.757 I-1.599 J.685 E.05681 G1 X14.713 Y5.891 E.00624 G1 X14.713 Y9.038 E.10438 G1 X14.989 Y9.36 E.01406 G3 X14.845 Y10.998 I-1.599 J.685 E.05681 G1 X14.713 Y11.133 E.00624 G1 X14.713 Y14.279 E.10438 G1 X14.989 Y14.601 E.01406 G3 X14.845 Y16.239 I-1.599 J.685 E.05681 G1 X14.713 Y16.374 E.00624 G1 X14.713 Y18.487 E.07009 G1 X16.404 Y18.487 E.0561 G3 X17.126 Y17.102 I1.939 J.13 E.05329 G2 X19.263 Y17.108 I1.074 J-2.253 E.07326 G2 X19.025 Y17.55 I.585 J.599 E.01689 G1 X19.025 Y18.205 E.02173 G1 X19.147 Y18.487 E.0102 G1 X20.776 Y18.487 E.05401 G1 X20.247 Y13.814 F30000 G1 F16200 G2 X19.025 Y12.787 I-2.271 J1.461 E.05374 G1 X19.025 Y12.308 E.01588 G3 X20.086 Y10.998 I3.168 J1.48 E.05647 G2 X20.37 Y9.688 I-1.362 J-.981 E.04575 G2 X19.309 Y8.377 I-3.168 J1.48 E.05647 G3 X19.025 Y7.067 I1.362 J-.981 E.04575 G3 X20.086 Y5.757 I3.168 J1.48 E.05647 G2 X20.37 Y4.446 I-1.362 J-.981 E.04575 G2 X19.309 Y3.136 I-3.168 J1.48 E.05647 G3 X19.025 Y1.826 I1.362 J-.981 E.04575 G3 X20.086 Y.515 I3.168 J1.48 E.05647 G1 X20.371 Y-.14 E.02369 G2 X19.965 Y-1.432 I-1.307 J-.3 E.0471 G3 X17.485 Y-.75 I-1.792 J-1.663 E.08985 G3 X17.749 Y.515 I-1.32 J.936 E.0441 G3 X16.689 Y1.826 I-3.168 J-1.48 E.05647 G2 X16.405 Y3.136 I1.362 J.981 E.04575 G2 X17.465 Y4.446 I3.168 J-1.48 E.05647 G3 X17.749 Y5.757 I-1.362 J.981 E.04575 G3 X16.689 Y7.067 I-3.168 J-1.48 E.05647 G2 X16.405 Y8.377 I1.362 J.981 E.04575 G2 X17.465 Y9.688 I3.168 J-1.48 E.05647 G3 X17.749 Y10.998 I-1.362 J.981 E.04575 G3 X16.689 Y12.308 I-3.168 J-1.48 E.05647 G1 X16.404 Y12.963 E.02369 G1 X16.405 Y13.467 E.01669 G2 X15.837 Y14.957 I2.094 J1.651 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X16.014 Y14.095 G1 X16.405 Y13.467 G1 X16.404 Y13.087 ;WIPE_END G1 X9.478 Y16.293 Z5.4 F30000 G1 X-2.945 Y22.045 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z5.4 F30000 G1 X-15.232 Y53.745 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z5.4 F30000 G1 X-5.6 Y52.94 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27035 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48883 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290593 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01244 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13122 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01244 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01244 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.319 Y46.157 Z5.4 F30000 G1 X-37.671 Y-1.169 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00206 G3 X-39.624 Y-4.99 I-1.081 J-1.861 E.23402 G3 X-39.055 Y-5.138 I.786 J1.866 E.01958 G3 X-37.492 Y-1.295 I.249 J2.138 E.1857 G1 X-37.638 Y-1.192 E.00595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.897 Y-1.507 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.491 E.00118 G3 X-39.468 Y-4.613 I-.876 J-1.509 E.18971 G3 X-39.005 Y-4.733 I.639 J1.519 E.01594 G3 X-37.74 Y-1.618 I.2 J1.733 E.15044 G1 X-37.864 Y-1.53 E.00506 G1 X-38.136 Y-1.872 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.148 Y-1.87 E.00035 G3 X-39.138 Y-4.266 I-.661 J-1.13 E.13743 G1 X-38.951 Y-4.301 E.00583 G3 X-37.879 Y-2.079 I.142 J1.301 E.09894 G1 X-38.105 Y-1.897 E.00893 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.148 Y-1.87 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.8 Y-1.69 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.877 Y-2.259 ;WIPE_END G1 X-40.121 Y5.37 Z5.4 F30000 G1 X-40.473 Y16.353 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.511 Y16.313 E.00185 G3 X-39.624 Y13.01 I1.706 J-1.313 E.13114 G3 X-39.055 Y12.862 I.786 J1.866 E.01958 G3 X-40.325 Y16.525 I.249 J2.138 E.28855 G1 X-40.447 Y16.384 E.00619 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.167 Y16.085 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.188 Y16.065 E.00096 G3 X-39.468 Y13.387 I1.382 J-1.064 E.10632 G3 X-39.005 Y13.267 I.639 J1.519 E.01594 G3 X-40.036 Y16.236 I.2 J1.733 E.23381 G1 X-40.141 Y16.115 E.0053 G1 X-39.844 Y15.801 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.138 Y13.734 I1.035 J-.801 E.07943 G1 X-38.951 Y13.699 E.00583 G3 X-39.819 Y15.832 I.142 J1.301 E.16621 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.936 Y15.654 G1 X-40.066 Y15.339 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.661 G1 X-40.011 Y14.499 G1 X-39.84 Y14.202 G1 X-39.664 Y14.027 ;WIPE_END G1 X-38.023 Y6.573 Z5.4 F30000 G1 X-35.102 Y-6.698 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.511 Y-2.408 Z5.4 F30000 G1 Z5 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-37.41 Y-1.089 I-2.329 J-.623 E.05395 G1 X-37.284 Y-.795 E.01062 G3 X-37.568 Y.515 I-1.646 J.329 E.04575 G2 X-38.629 Y1.826 I2.108 J2.79 E.05647 G2 X-38.345 Y3.136 I1.646 J.329 E.04575 G3 X-37.284 Y4.446 I-2.108 J2.79 E.05647 G3 X-37.568 Y5.757 I-1.646 J.329 E.04575 G2 X-38.629 Y7.067 I2.108 J2.79 E.05647 G2 X-38.345 Y8.377 I1.646 J.329 E.04575 G3 X-37.284 Y9.688 I-2.108 J2.79 E.05647 G3 X-37.568 Y10.998 I-1.646 J.329 E.04575 G2 X-38.629 Y12.308 I2.108 J2.79 E.05647 G1 X-38.629 Y12.645 E.01118 G2 X-40.985 Y14.092 I-.124 J2.439 E.09747 G3 X-41.25 Y12.963 I.964 J-.822 E.03996 G1 X-40.966 Y12.308 E.02369 G2 X-39.905 Y10.998 I-2.108 J-2.79 E.05647 G2 X-40.189 Y9.688 I-1.646 J-.329 E.04575 G3 X-41.249 Y8.377 I2.108 J-2.79 E.05647 G3 X-40.966 Y7.067 I1.646 J-.329 E.04575 G2 X-39.905 Y5.757 I-2.108 J-2.79 E.05647 G2 X-40.189 Y4.446 I-1.646 J-.329 E.04575 G3 X-41.249 Y3.136 I2.108 J-2.79 E.05647 G3 X-40.966 Y1.826 I1.646 J-.329 E.04575 G2 X-39.905 Y.515 I-2.108 J-2.79 E.05647 G2 X-40.189 Y-.795 I-1.646 J-.329 E.04575 G3 X-41.249 Y-2.105 I2.108 J-2.79 E.05647 G1 X-41.25 Y-2.76 E.02173 G2 X-40.973 Y-3.93 I-128.949 J-31.122 E.03988 G3 X-40.65 Y-4.471 I2.563 J1.167 E.02096 G1 X-41.937 Y-6.166 F30000 G1 F16200 G1 X-41.937 Y-6.487 E.01064 G1 X-40.629 Y-6.487 E.04337 G3 X-39.905 Y-5.087 I-1.213 J1.515 E.05383 G3 X-37.471 Y-4.951 I1.104 J2.091 E.08497 G2 X-37.53 Y-6.487 I-1.086 J-.727 E.0545 G1 X-35.313 Y-6.487 E.07352 G1 X-35.313 Y-3.836 E.08793 G2 X-35.868 Y-1.778 I.979 J1.368 E.0766 G2 X-35.313 Y-1.169 I4.858 J-3.872 E.02735 G1 X-35.313 Y1.405 E.08538 G2 X-35.868 Y3.464 I.979 J1.368 E.0766 G2 X-35.313 Y4.072 I4.858 J-3.872 E.02735 G1 X-35.313 Y6.646 E.08538 G2 X-35.868 Y8.705 I.979 J1.368 E.0766 G2 X-35.313 Y9.314 I4.858 J-3.872 E.02735 G1 X-35.313 Y11.888 E.08538 G2 X-35.868 Y13.946 I.979 J1.368 E.0766 G2 X-35.313 Y14.555 I4.858 J-3.872 E.02735 G1 X-35.313 Y17.129 E.08538 G2 X-36.009 Y18.487 I1.223 J1.483 E.05204 G1 X-38.507 Y18.487 E.08288 G1 X-38.629 Y18.205 E.0102 G1 X-38.629 Y17.55 E.02173 G1 X-38.543 Y17.349 E.00724 G3 X-40.28 Y16.842 I-.248 J-2.377 E.06156 G3 X-40.966 Y17.55 I-5.666 J-4.801 E.0327 G1 X-41.25 Y18.205 E.02369 G1 X-41.25 Y18.487 E.00936 G1 X-41.937 Y18.487 E.02279 G1 X-41.937 Y17.546 E.03122 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.937 Y18.487 G1 X-41.25 Y18.487 G1 X-41.25 Y18.205 G1 X-41.214 Y18.123 ;WIPE_END G1 X-40.711 Y10.507 Z5.4 F30000 G1 X-39.352 Y-10.052 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z5.4 F30000 G1 X-42.652 Y-23.367 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z5.4 F30000 G1 X-51.352 Y-52.052 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:5.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.6 I-.53 J1.095 P1 F30000 G1 X49.732 Y-1.704 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00905 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.693 Y-1.697 E.01237 G1 X49.817 Y-1.278 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00573 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01575 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.778 Y-1.27 E.0088 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.26 Y-.272 ;WIPE_END G1 X50.397 Y-2.113 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00075 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.358 Y-2.12 I-.816 J-1.988 E.26338 G1 X50.44 Y-2.546 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.991 Y-2.392 E.01757 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.4 Y-2.55 E.01235 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.068 Y-1.542 ;WIPE_END G1 X49.1 Y-8.574 Z5.6 F30000 G1 X30.752 Y-52.052 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z5.6 F30000 G1 X18.752 Y-10.052 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.612 Y-3.606 Z5.6 F30000 G1 X18.844 Y-.948 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.921 E.00302 G3 X17.123 Y-4.866 I-.566 J-2.076 E.20618 G3 X18.01 Y-5.142 I1.051 J1.812 E.03109 G3 X19.023 Y-1.013 I.181 J2.144 E.20192 G1 X18.881 Y-.962 E.00499 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.713 Y-1.334 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.316 E.00213 G3 X17.327 Y-4.512 I-.458 J-1.683 E.16705 G3 X18.037 Y-4.736 I.853 J1.471 E.02489 G3 X18.867 Y-1.39 I.156 J1.737 E.16397 G1 X18.751 Y-1.348 E.00411 G1 X18.575 Y-1.749 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.539 Y-1.736 E.00118 G3 X17.699 Y-4.211 I-.345 J-1.263 E.12151 G3 X18.065 Y-4.302 I.542 J1.399 E.01164 G3 X18.854 Y-1.868 I.128 J1.303 E.10908 G1 X18.612 Y-1.765 E.00808 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.539 Y-1.736 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.985 Y-2.539 ;WIPE_END G1 X17.319 Y5.086 Z5.6 F30000 G1 X17.846 Y17.121 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.642 Y17.083 E.00688 G3 X17.123 Y13.134 I.549 J-2.081 E.16876 G3 X18.01 Y12.858 I1.051 J1.812 E.03109 G3 X17.919 Y17.137 I.181 J2.144 E.23932 G1 X17.885 Y17.13 E.00115 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.925 Y16.722 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.688 E.00599 G3 X17.327 Y13.488 I.445 J-1.686 E.13677 G3 X18.037 Y13.264 I.853 J1.471 E.02489 G3 X17.972 Y16.732 I.156 J1.737 E.19432 G1 X17.964 Y16.73 E.00027 G1 X18.012 Y16.295 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.698 Y16.212 E.00997 G3 X17.699 Y13.789 I.496 J-1.211 E.09513 G3 X18.065 Y13.698 I.541 J1.399 E.01164 G3 X18.051 Y16.302 I.128 J1.303 E.13469 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.698 Y16.212 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.896 Y14.905 ;WIPE_END G1 X16.055 Y7.319 Z5.6 F30000 G1 X14.502 Y-6.698 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X21.337 Y-6.301 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-6.487 E.00615 G1 X19.894 Y-6.487 E.04786 G3 X20.188 Y-4.726 I-1.032 J1.077 E.06348 G1 X20.014 Y-4.512 E.00914 G2 X17.719 Y-5.308 I-1.807 J1.504 E.08466 G2 X17.202 Y-6.487 I-1.405 J-.086 E.04438 G1 X14.713 Y-6.487 E.08255 G1 X14.713 Y-6.407 E.00264 G3 X14.946 Y-4.726 I-1.065 J1.005 E.06006 G1 X14.713 Y-4.438 E.01228 G1 X14.713 Y-1.166 E.10855 G3 X14.946 Y.515 I-1.065 J1.005 E.06006 G1 X14.713 Y.803 E.01228 G1 X14.713 Y4.075 E.10855 G3 X14.946 Y5.757 I-1.065 J1.005 E.06006 G1 X14.713 Y6.044 E.01228 G1 X14.713 Y9.317 E.10855 G3 X14.946 Y10.998 I-1.065 J1.005 E.06006 G1 X14.713 Y11.286 E.01228 G1 X14.713 Y14.558 E.10855 G3 X14.946 Y16.239 I-1.065 J1.005 E.06006 G1 X14.713 Y16.527 E.01228 G1 X14.713 Y18.155 E.05401 G1 X20.528 Y15.396 F30000 G1 F16200 G3 X20.386 Y15.905 I-2.006 J-.287 E.01759 G3 X19.16 Y17.55 I-10.312 J-6.409 E.06811 G1 X19.042 Y18.205 E.02208 G1 X19.113 Y18.487 E.00965 G1 X16.472 Y18.487 E.08761 G3 X17.002 Y17.038 I1.646 J-.219 E.0532 G3 X16.494 Y13.365 I1.247 J-2.044 E.14069 G1 X16.421 Y12.963 E.01354 G1 X16.587 Y12.308 E.02242 G1 X17.118 Y11.653 E.02798 G2 X17.567 Y9.688 I-1.145 J-1.295 E.0714 G1 X17.036 Y9.032 E.02798 G3 X16.587 Y7.067 I1.145 J-1.295 E.0714 G1 X17.118 Y6.412 E.02798 G2 X17.567 Y4.446 I-1.145 J-1.295 E.0714 G1 X17.036 Y3.791 E.02798 G3 X16.587 Y1.826 I1.145 J-1.295 E.0714 G1 X17.118 Y1.171 E.02798 G2 X17.587 Y-.715 I-1.115 J-1.278 E.06862 G2 X19.848 Y-1.306 I.602 J-2.317 E.08099 G3 X20.188 Y.515 I-1.17 J1.16 E.06525 G1 X19.656 Y1.171 E.02798 G2 X19.208 Y3.136 I1.145 J1.295 E.0714 G1 X19.739 Y3.791 E.02798 G3 X20.188 Y5.757 I-1.145 J1.295 E.0714 G1 X19.656 Y6.412 E.02798 G2 X19.208 Y8.377 I1.145 J1.295 E.0714 G1 X19.739 Y9.032 E.02798 G3 X20.188 Y10.998 I-1.145 J1.295 E.0714 G2 X19.16 Y12.308 I19.293 J16.191 E.05525 G1 X19.071 Y12.803 E.01666 G3 X20.269 Y13.857 I-.903 J2.233 E.05395 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X19.873 Y13.327 G1 X19.383 Y12.951 G1 X19.071 Y12.803 G1 X19.137 Y12.433 ;WIPE_END G1 X12.139 Y15.479 Z5.6 F30000 G1 X-2.945 Y22.045 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z5.6 F30000 G1 X-15.232 Y53.745 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z5.6 F30000 G1 X-5.6 Y52.94 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.259 J1.929 E.17717 G3 X-5.368 Y53.745 I-.496 J-1.895 E.0928 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48882 M73 P59 R33 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.48841 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290593 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z5.6 F30000 G1 X-3.671 Y51.454 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-8.015 Y46.426 Z5.6 F30000 G1 X-37.672 Y-1.168 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00203 G3 X-39.877 Y-4.866 I-1.084 J-1.859 E.22486 G3 X-38.99 Y-5.142 I1.051 J1.812 E.03109 G3 X-37.492 Y-1.296 I.181 J2.144 E.18325 G1 X-37.639 Y-1.192 E.00597 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.898 Y-1.507 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.491 E.00115 G3 X-39.673 Y-4.512 I-.878 J-1.507 E.18226 G3 X-38.963 Y-4.736 I.853 J1.471 E.02489 G3 X-37.74 Y-1.618 I.156 J1.738 E.1489 G1 X-37.865 Y-1.53 E.00509 G1 X-38.137 Y-1.871 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.869 E.0003 G3 X-39.301 Y-4.211 I-.659 J-1.13 E.13194 G3 X-38.935 Y-4.302 I.541 J1.399 E.01164 G3 X-37.878 Y-2.078 I.128 J1.302 E.09852 G1 X-38.106 Y-1.896 E.00898 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.869 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.727 Y-2.073 G1 X-39.873 Y-2.264 ;WIPE_END G1 X-40.119 Y5.364 Z5.6 F30000 G1 X-40.472 Y16.353 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.514 Y16.315 E.00188 G3 X-39.877 Y13.134 I1.705 J-1.313 E.12189 G3 X-38.99 Y12.858 I1.051 J1.812 E.03109 G3 X-40.327 Y16.527 I.181 J2.144 E.28617 G1 X-40.447 Y16.384 E.00618 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.166 Y16.085 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.189 Y16.065 E.00098 G3 X-39.673 Y13.488 I1.381 J-1.064 E.09878 G3 X-38.963 Y13.264 I.853 J1.471 E.02489 G3 X-40.037 Y16.237 I.156 J1.737 E.23221 G1 X-40.14 Y16.116 E.00529 G1 X-39.843 Y15.8 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y13.789 I1.036 J-.799 E.074 G3 X-38.935 Y13.698 I.541 J1.399 E.01164 G3 X-39.818 Y15.831 I.128 J1.303 E.16583 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.935 Y15.655 G1 X-40.022 Y15.467 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.669 Y14.023 ;WIPE_END G1 X-38.026 Y6.569 Z5.6 F30000 G1 X-35.102 Y-6.698 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-5.676 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.048 E.05401 G1 X-35.826 Y-3.416 E.02701 G2 X-35.377 Y-1.45 I1.594 J.67 E.0714 G1 X-35.313 Y-1.371 E.00338 G1 X-35.313 Y1.193 E.08506 G1 X-35.826 Y1.826 E.02701 G2 X-35.377 Y3.791 I1.594 J.67 E.0714 G1 X-35.313 Y3.87 E.00338 G1 X-35.313 Y6.435 E.08506 G1 X-35.826 Y7.067 E.02701 G2 X-35.377 Y9.032 I1.594 J.67 E.0714 G1 X-35.313 Y9.112 E.00338 G1 X-35.313 Y11.676 E.08506 G1 X-35.826 Y12.308 E.02701 G2 X-35.377 Y14.274 I1.594 J.67 E.0714 G1 X-35.313 Y14.353 E.00338 G1 X-35.313 Y16.917 E.08506 G1 X-35.826 Y17.55 E.02701 G1 X-35.992 Y18.205 E.02242 G1 X-35.941 Y18.487 E.00951 G1 X-38.541 Y18.487 E.08625 G1 X-38.612 Y18.205 E.00965 G1 X-38.494 Y17.55 E.02208 G1 X-38.313 Y17.31 E.00997 G3 X-40.41 Y16.728 I-.448 J-2.454 E.0747 G3 X-41.067 Y17.55 I-12.746 J-9.527 E.03491 G1 X-41.233 Y18.205 E.02242 G1 X-41.182 Y18.487 E.00951 G1 X-41.937 Y18.487 E.02503 G1 X-41.937 Y17.613 E.02898 G1 X-36.568 Y-2.232 F30000 G1 F16200 G3 X-37.564 Y-.987 I-2.475 J-.959 E.05373 G1 X-37.419 Y-.795 E.00797 G3 X-37.998 Y1.171 I-1.744 J.554 E.07214 G1 X-38.494 Y1.826 E.02727 G2 X-37.915 Y3.791 I1.744 J.554 E.07214 G1 X-37.419 Y4.446 E.02727 G3 X-37.998 Y6.412 I-1.744 J.554 E.07214 G1 X-38.494 Y7.067 E.02727 G2 X-37.915 Y9.032 I1.744 J.554 E.07214 G1 X-37.419 Y9.688 E.02727 G3 X-37.998 Y11.653 I-1.744 J.554 E.07214 G1 X-38.494 Y12.308 E.02727 G1 X-38.556 Y12.65 E.01152 G2 X-40.895 Y13.91 I-.197 J2.436 E.09315 G1 X-41.115 Y13.619 E.01211 G3 X-40.536 Y11.653 I1.744 J-.554 E.07214 G1 X-40.04 Y10.998 E.02727 G2 X-40.619 Y9.032 I-1.744 J-.554 E.07214 G1 X-41.115 Y8.377 E.02727 G3 X-40.536 Y6.412 I1.744 J-.554 E.07214 G1 X-40.04 Y5.757 E.02727 G2 X-40.619 Y3.791 I-1.744 J-.554 E.07214 G1 X-41.115 Y3.136 E.02727 G3 X-40.536 Y1.171 I1.744 J-.554 E.07214 G1 X-40.04 Y.515 E.02727 G2 X-40.619 Y-1.45 I-1.744 J-.554 E.07214 G1 X-41.115 Y-2.105 E.02727 G1 X-41.233 Y-2.76 E.02208 G3 X-40.473 Y-4.673 I3.47 J.272 E.0693 G3 X-39.981 Y-5.05 I2.362 J2.572 E.02057 G1 X-39.922 Y-5.381 E.01117 G2 X-40.453 Y-6.487 I-1.459 J.02 E.042 G1 X-37.76 Y-6.487 E.08931 G1 X-37.419 Y-6.036 E.01875 G1 X-37.301 Y-5.381 E.02208 G1 X-37.419 Y-4.916 E.01591 G3 X-36.513 Y-3.602 I-1.422 J1.95 E.05396 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.614 Y-3.905 G1 X-36.923 Y-4.44 G1 X-37.419 Y-4.916 G1 X-37.326 Y-5.28 ;WIPE_END G1 X-39.352 Y-10.052 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z5.6 F30000 G1 X-42.652 Y-23.367 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-43.044 Y-21.803 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-43.044 Y-22.975 E.036 G1 X-49.356 Y-22.975 E.19394 G1 X-49.356 Y-21.803 E.036 G1 X-43.084 Y-21.803 E.19271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.431 Y-22.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440242 G1 F15000 G1 X-43.431 Y-22.588 E.01286 G1 X-48.969 Y-22.588 E.17928 G1 X-48.969 Y-22.191 E.01286 G1 X-43.471 Y-22.191 E.17798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-45.471 Y-22.191 ;WIPE_END G1 X-46.946 Y-29.679 Z5.6 F30000 G1 X-51.352 Y-52.052 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:5.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.8 I-.53 J1.095 P1 F30000 G1 X49.756 Y-1.709 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00825 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.717 Y-1.701 E.01318 G1 X49.841 Y-1.283 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00498 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.802 Y-1.275 E.00955 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.265 Y-.248 ;WIPE_END G1 X50.394 Y-2.113 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00086 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.355 Y-2.12 I-.816 J-1.988 E.26327 G1 X50.437 Y-2.546 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.991 Y-2.392 E.01767 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 M73 P59 R32 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.397 Y-2.55 E.01225 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.066 Y-1.544 ;WIPE_END G1 X49.098 Y-8.576 Z5.8 F30000 G1 X30.752 Y-52.052 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z5.8 F30000 G1 X18.752 Y-10.052 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.608 Y-3.606 Z5.8 F30000 G1 X18.839 Y-.947 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.921 E.00284 G3 X16.889 Y-4.709 I-.564 J-2.077 E.19671 G3 X18.014 Y-5.142 I1.326 J1.766 E.04052 G3 X19.023 Y-1.012 I.179 J2.145 E.20192 G1 X18.876 Y-.96 E.00517 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.708 Y-1.332 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.317 E.00195 G3 X16.564 Y-2.397 I-.451 J-1.684 E.08554 G3 X18.041 Y-4.736 I1.637 J-.602 E.10595 G3 X18.867 Y-1.39 I.159 J1.736 E.16421 G1 X18.745 Y-1.346 E.00429 G1 X18.569 Y-1.747 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.538 Y-1.737 E.001 G3 X17.699 Y-4.211 I-.345 J-1.262 E.12146 G3 X18.069 Y-4.302 I.536 J1.381 E.01177 G3 X18.853 Y-1.869 I.124 J1.303 E.10886 G1 X18.606 Y-1.763 E.00825 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.538 Y-1.737 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.976 Y-2.537 G1 X16.975 Y-2.541 ;WIPE_END G1 X17.317 Y5.084 Z5.8 F30000 G1 X17.856 Y17.123 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.644 Y17.077 E.00721 G3 X16.179 Y15.734 I.556 J-2.077 E.06852 G3 X18.014 Y12.858 I2.022 J-.733 E.13069 G3 X20.221 Y14.266 I.184 J2.144 E.09335 G3 X17.919 Y17.131 I-2.021 J.733 E.14619 G1 X17.895 Y17.128 E.0008 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.935 Y16.724 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.687 E.00633 G3 X17.327 Y13.488 I.445 J-1.686 E.13675 G3 X18.041 Y13.264 I.852 J1.47 E.02503 G3 X17.975 Y16.731 I.152 J1.737 E.19403 G1 X18.021 Y16.297 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.698 Y16.213 E.01027 G3 X17.699 Y13.789 I.496 J-1.212 E.09517 G3 X18.069 Y13.698 I.536 J1.381 E.01177 G3 X18.06 Y16.304 I.124 J1.303 E.13428 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.698 Y16.213 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.976 Y15.463 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.895 Y14.915 ;WIPE_END G1 X16.055 Y7.329 Z5.8 F30000 G1 X14.502 Y-6.698 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.081 Y-6.487 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.04538 G2 X14.885 Y-6.036 I.336 J.13 E.01752 G1 X15.119 Y-5.381 E.02308 G3 X14.713 Y-4.179 I-1.41 J.193 E.04362 G1 X14.713 Y-.985 E.10594 G1 X14.885 Y-.795 E.0085 G1 X15.119 Y-.14 E.02308 G3 X14.713 Y1.062 I-1.41 J.193 E.04362 G1 X14.713 Y4.256 E.10594 G1 X14.885 Y4.446 E.0085 G1 X15.119 Y5.101 E.02308 G3 X14.713 Y6.303 I-1.41 J.193 E.04362 G1 X14.713 Y9.497 E.10594 G1 X14.885 Y9.688 E.0085 G1 X15.119 Y10.343 E.02308 G3 X14.713 Y11.545 I-1.41 J.193 E.04362 G1 X14.713 Y14.738 E.10594 G1 X14.885 Y14.929 E.0085 G1 X15.119 Y15.584 E.02308 G3 X14.713 Y16.786 I-1.41 J.193 E.04362 G1 X14.713 Y18.414 E.05401 G1 X15.93 Y15.658 F30000 G1 F16200 G2 X16.868 Y16.949 I2.526 J-.848 E.05375 G2 X16.515 Y18.487 I.876 J1.01 E.05598 G1 X19.056 Y18.487 E.08429 G1 X19.035 Y18.205 E.00939 G1 X19.269 Y17.55 E.02308 G2 X20.311 Y16.239 I-3.274 J-3.67 E.05579 G2 X20.566 Y15 I-24.744 J-5.741 E.04198 G2 X19.09 Y12.809 I-2.467 J.07 E.09246 G1 X19.269 Y12.308 E.01765 G2 X20.311 Y10.998 I-3.274 J-3.67 E.05579 G2 X19.536 Y9.032 I-1.972 J-.358 E.07381 G3 X19.035 Y7.722 I.993 J-1.131 E.04841 G1 X19.269 Y7.067 E.02308 G2 X20.311 Y5.757 I-3.274 J-3.67 E.05579 G2 X19.536 Y3.791 I-1.972 J-.358 E.07381 G3 X19.035 Y2.481 I.993 J-1.131 E.04841 G1 X19.269 Y1.826 E.02308 G2 X20.311 Y.515 I-3.274 J-3.67 E.05579 G2 X19.747 Y-1.216 I-1.805 J-.37 E.06319 G3 X17.698 Y-.693 I-1.585 J-1.933 E.07243 G1 X17.74 Y-.14 E.0184 G1 X17.505 Y.515 E.02308 G2 X16.464 Y1.826 I3.274 J3.67 E.05579 G2 X17.239 Y3.791 I1.972 J.358 E.07381 G3 X17.74 Y5.101 I-.993 J1.131 E.04841 G1 X17.505 Y5.757 E.02308 G2 X16.464 Y7.067 I3.274 J3.67 E.05579 G2 X17.239 Y9.032 I1.972 J.358 E.07381 G3 X17.74 Y10.343 I-.993 J1.131 E.04841 G1 X17.505 Y10.998 E.02308 G2 X16.464 Y12.308 I3.274 J3.67 E.05579 G1 X16.414 Y12.963 E.0218 G1 X16.54 Y13.316 E.01241 G3 X17.99 Y12.648 I1.673 J1.725 E.05397 G1 X20.555 Y-2.837 F30000 G1 F16200 G2 X20.123 Y-4.371 I-2.646 J-.083 E.05373 G2 X19.72 Y-6.487 I-1.438 J-.822 E.07776 G1 X17.418 Y-6.487 E.07637 G3 X17.69 Y-6.036 I-.726 J.746 E.01765 G1 X17.713 Y-5.306 E.02422 G2 X16.354 Y-4.475 I.623 J2.546 E.05371 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.017 Y-5.049 G1 X17.713 Y-5.306 G1 X17.701 Y-5.687 ;WIPE_END G1 X13.143 Y.435 Z5.8 F30000 G1 X-2.945 Y22.045 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z5.8 F30000 G1 X-15.232 Y53.745 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z5.8 F30000 G1 X-5.6 Y52.94 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27034 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-19.714 Y53.752 I-2.672 J-.794 E.22083 G3 X-14.359 Y52.21 I2.683 J-.752 E.2678 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290578 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.319 Y46.157 Z5.8 F30000 G1 X-37.672 Y-1.168 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00202 G3 X-40.111 Y-4.709 I-1.082 J-1.86 E.21539 G3 X-38.986 Y-5.142 I1.326 J1.766 E.04053 G3 X-37.491 Y-1.295 I.179 J2.145 E.18324 G1 X-37.639 Y-1.191 E.00599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.898 Y-1.507 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.93 Y-1.493 E.00114 G3 X-39.673 Y-4.512 I-.878 J-1.506 E.18213 G3 X-38.959 Y-4.736 I.852 J1.47 E.02503 G3 X-37.741 Y-1.62 I.152 J1.737 E.14865 G1 X-37.866 Y-1.53 E.00511 G1 X-38.138 Y-1.87 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.868 E.00026 G3 X-39.301 Y-4.211 I-.66 J-1.13 E.13205 G3 X-38.931 Y-4.302 I.536 J1.381 E.01177 G3 X-37.877 Y-2.077 I.124 J1.303 E.09841 G1 X-38.107 Y-1.895 E.00901 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.868 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.879 Y-2.26 ;WIPE_END G1 X-40.122 Y5.368 Z5.8 F30000 G1 X-40.472 Y16.354 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.512 Y16.313 E.00188 G3 X-40.111 Y13.291 I1.704 J-1.312 E.11241 G3 X-38.986 Y12.858 I1.326 J1.766 E.04053 G3 X-40.325 Y16.525 I.178 J2.143 E.28596 G1 X-40.446 Y16.384 E.00616 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.166 Y16.085 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.188 Y16.065 E.001 G3 X-39.673 Y13.488 I1.381 J-1.064 E.09877 G3 X-38.959 Y13.264 I.852 J1.47 E.02503 G3 X-40.037 Y16.237 I.152 J1.737 E.23198 G1 X-40.14 Y16.116 E.00527 G1 X-39.839 Y15.798 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.843 Y15.8 E.00012 G3 X-39.301 Y13.789 I1.036 J-.799 E.074 G3 X-38.931 Y13.698 I.536 J1.381 E.01177 G3 X-39.599 Y16.042 I.124 J1.303 E.15626 G1 X-39.811 Y15.827 E.00927 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.843 Y15.8 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.667 Y14.027 ;WIPE_END G1 X-38.025 Y6.574 Z5.8 F30000 G1 X-35.102 Y-6.698 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-5.904 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.276 E.05401 G2 X-35.949 Y-3.416 I2.221 J2.307 E.03565 G2 X-35.313 Y-1.604 I1.854 J.366 E.06679 G1 X-35.313 Y.966 E.08525 G2 X-35.949 Y1.826 I2.221 J2.307 E.03565 G2 X-35.313 Y3.637 I1.854 J.366 E.06679 G1 X-35.313 Y6.207 E.08525 G2 X-35.949 Y7.067 I2.221 J2.307 E.03565 G2 X-35.313 Y8.878 I1.854 J.366 E.06679 G1 X-35.313 Y11.448 E.08525 G2 X-35.949 Y12.308 I2.221 J2.307 E.03565 G2 X-35.313 Y14.12 I1.854 J.366 E.06679 G1 X-35.313 Y16.689 E.08525 G2 X-35.949 Y17.55 I2.221 J2.307 E.03565 G1 X-35.999 Y18.205 E.0218 G1 X-35.898 Y18.487 E.00994 G1 X-37.526 Y18.487 E.05401 G1 X-36.843 Y16.321 F30000 G1 F16200 G3 X-38.129 Y17.265 I-2.095 J-1.504 E.0538 G1 X-38.385 Y17.55 E.01269 G1 X-38.619 Y18.205 E.02308 G1 X-38.598 Y18.487 E.00939 G1 X-41.139 Y18.487 E.08429 G1 X-41.24 Y18.205 E.00994 G1 X-41.19 Y17.55 E.0218 G3 X-40.506 Y16.635 I3.029 J1.555 E.03806 G3 X-41.154 Y15.178 I1.996 J-1.761 E.05373 G1 X-36.601 Y-2.133 F30000 G1 F16200 G3 X-37.653 Y-.933 I-2.235 J-.898 E.05395 G1 X-37.528 Y-.795 E.00618 G3 X-37.508 Y.843 I-1.522 J.838 E.05658 G3 X-38.385 Y1.826 I-37.943 J-32.983 E.0437 G2 X-38.406 Y3.464 I1.522 J.838 E.05658 G2 X-37.528 Y4.446 I37.95 J-32.989 E.0437 G3 X-37.508 Y6.084 I-1.522 J.838 E.05658 G3 X-38.385 Y7.067 I-37.943 J-32.983 E.0437 G2 X-38.406 Y8.705 I1.522 J.838 E.05658 G2 X-37.528 Y9.688 I37.948 J-32.987 E.0437 G3 X-37.508 Y11.326 I-1.522 J.838 E.05658 G3 X-38.385 Y12.308 I-37.943 J-32.983 E.0437 G1 X-38.508 Y12.653 E.01216 G2 X-40.839 Y13.803 I-.281 J2.369 E.09118 G1 X-41.006 Y13.619 E.00823 G3 X-41.026 Y11.981 I1.522 J-.838 E.05658 G3 X-40.149 Y10.998 I37.948 J32.987 E.0437 G2 X-40.128 Y9.36 I-1.522 J-.838 E.05658 G2 X-41.006 Y8.377 I-37.943 J32.983 E.0437 G3 X-41.026 Y6.739 I1.522 J-.838 E.05658 G3 X-40.149 Y5.757 I37.948 J32.987 E.0437 G2 X-40.128 Y4.119 I-1.522 J-.838 E.05658 G2 X-41.006 Y3.136 I-37.943 J32.983 E.0437 G3 X-41.026 Y1.498 I1.522 J-.838 E.05658 G3 X-40.149 Y.515 I37.943 J32.983 E.0437 G2 X-40.073 Y-1.011 I-1.541 J-.842 E.05245 G3 X-41.24 Y-2.76 I1.632 J-2.353 E.07144 G1 X-41.19 Y-3.416 E.0218 G3 X-40.049 Y-5.004 I2.713 J.744 E.06627 G1 X-39.915 Y-5.381 E.01327 G1 X-39.964 Y-6.036 E.0218 G2 X-40.236 Y-6.487 I-.998 J.295 E.01765 G1 X-37.934 Y-6.487 E.07637 G3 X-37.334 Y-4.854 I-1.189 J1.364 E.06019 G3 X-36.492 Y-3.499 I-1.746 J2.023 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.751 Y-4.183 G1 X-37.334 Y-4.854 G1 X-37.305 Y-5.233 ;WIPE_END G1 X-39.352 Y-10.052 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.652 Y-16.758 Z5.8 F30000 G1 X-42.652 Y-23.367 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-42.652 Y-21.411 E.06488 G1 X-49.748 Y-21.411 E.23538 G1 X-49.748 Y-23.367 E.06488 G1 X-42.692 Y-23.367 E.23406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.245 Y-23.774 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-42.245 Y-21.004 E.09189 G1 X-50.155 Y-21.004 E.26239 G1 X-50.155 Y-23.774 E.09189 G1 X-42.285 Y-23.774 E.26106 G1 X-41.81 Y-24.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.11185 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-24.209 E.11185 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.828 Y-22.209 ;WIPE_END G1 X-42.678 Y-22.533 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.441629 G1 F12000 G1 X-43.487 Y-23.341 E.03713 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.05 Y-23.341 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.678 Y-21.969 E.06304 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.711 Y-21.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.614 Y-23.341 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.178 Y-23.341 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.275 Y-21.438 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.839 Y-21.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.742 Y-23.341 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.306 Y-23.341 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.403 Y-21.438 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.967 Y-21.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.87 Y-23.341 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.434 Y-23.341 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.53 Y-21.438 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.094 Y-21.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.997 Y-23.341 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.561 Y-23.341 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.658 Y-21.438 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.222 Y-21.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.125 Y-23.341 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.689 Y-23.341 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.786 Y-21.438 E.08745 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.35 Y-21.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.722 Y-22.81 E.06303 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.722 Y-22.246 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.914 Y-21.438 E.03713 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.722 Y-22.246 ;WIPE_END G1 X-50.138 Y-29.867 Z5.8 F30000 G1 X-51.352 Y-52.052 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:5.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6 I-.53 J1.095 P1 F30000 G1 X49.773 Y-1.713 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00767 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.734 Y-1.705 E.01375 G1 X49.858 Y-1.286 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00445 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.819 Y-1.278 E.01008 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-1.314 G1 X50.503 Y-1.214 G1 X50.929 Y-.929 G1 X51.214 Y-.503 G1 X51.268 Y-.231 ;WIPE_END G1 X50.391 Y-2.113 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00097 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.351 Y-2.12 I-.816 J-1.987 E.26315 G1 X50.433 Y-2.546 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00222 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.393 Y-2.55 E.01215 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.062 Y-1.548 ;WIPE_END G1 X49.095 Y-8.58 Z6 F30000 G1 X30.752 Y-52.052 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z6 F30000 G1 X18.752 Y-10.052 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.603 Y-3.606 Z6 F30000 G1 X18.833 Y-.945 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.756 Y-.923 E.00262 G3 X18.018 Y-5.142 I-.556 J-2.077 E.23668 G3 X19.648 Y-1.411 I.187 J2.14 E.17761 G3 X19.023 Y-1.014 I-1.448 J-1.589 E.0247 G1 X18.87 Y-.958 E.00539 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.702 Y-1.33 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.316 E.00174 G3 X17.327 Y-4.512 I-.459 J-1.682 E.16707 G3 X18.045 Y-4.736 I.852 J1.469 E.02516 G3 X18.867 Y-1.39 I.148 J1.738 E.16366 G1 X18.739 Y-1.344 E.0045 G1 X18.563 Y-1.744 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.539 Y-1.736 E.00079 G3 X17.699 Y-4.211 I-.346 J-1.263 E.12154 G3 X18.073 Y-4.302 I.532 J1.366 E.01189 G3 X18.853 Y-1.868 I.119 J1.304 E.10876 G1 X18.6 Y-1.76 E.00847 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.539 Y-1.736 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.98 Y-2.55 ;WIPE_END G1 X17.365 Y5.072 Z6 F30000 G1 X17.975 Y17.14 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.133 E.00186 G3 X18.018 Y12.858 I.277 J-2.133 E.20899 G3 X18.93 Y17.022 I.181 J2.143 E.20537 G3 X18.2 Y17.151 I-.734 J-2.022 E.02471 G1 X18.015 Y17.142 E.00615 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.002 Y16.733 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.73 E.00098 G3 X18.045 Y13.264 I.225 J-1.729 E.16916 G3 X18.799 Y16.637 I.154 J1.736 E.16649 G3 X18.2 Y16.744 I-.602 J-1.636 E.02029 G1 X18.041 Y16.736 E.00527 G1 X18.03 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00003 G3 X17.699 Y13.789 I.164 J-1.299 E.10572 G3 X18.073 Y13.698 I.532 J1.366 E.01189 G3 X18.371 Y16.298 I.119 J1.303 E.12453 G1 X18.07 Y16.299 E.00925 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.924 ;WIPE_END G1 X16.059 Y7.338 Z6 F30000 G1 X14.502 Y-6.698 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.961 Y-6.487 Z6 F30000 G1 Z5.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.0414 G1 X14.713 Y-6.107 E.01261 G1 X15.151 Y-5.381 E.02812 G3 X14.713 Y-3.945 I-1.229 J.41 E.05312 G1 X14.713 Y-.865 E.10216 G1 X15.151 Y-.14 E.02812 G3 X14.713 Y1.296 I-1.229 J.41 E.05312 G1 X14.713 Y4.376 E.10216 G1 X15.151 Y5.101 E.02812 G3 X14.713 Y6.538 I-1.229 J.41 E.05312 G1 X14.713 Y9.617 E.10216 G1 X15.151 Y10.343 E.02812 G3 X14.713 Y11.779 I-1.229 J.41 E.05312 G1 X14.713 Y14.858 E.10216 G1 X15.151 Y15.584 E.02812 G3 X14.713 Y17.02 I-1.229 J.41 E.05312 G1 X14.713 Y18.487 E.04865 G1 X14.875 Y18.487 E.00536 G1 X15.891 Y15.493 F30000 G1 F16200 G2 X16.729 Y16.85 I2.585 J-.659 E.05373 G2 X16.537 Y18.487 I.779 J.921 E.06018 G1 X18.972 Y18.487 E.08076 G1 X19.003 Y18.205 E.00942 G1 X19.362 Y17.55 E.02479 G2 X20.365 Y16.567 I-2.69 J-3.748 E.04675 G2 X20.416 Y15.797 I-.866 J-.445 E.02632 G2 X19.088 Y12.808 I-2.217 J-.804 E.11987 G1 X19.362 Y12.308 E.01892 G2 X20.365 Y11.326 I-2.69 J-3.748 E.04675 G1 X20.465 Y10.998 E.01136 G2 X20.033 Y9.688 I-1.803 J-.132 E.04696 G3 X19.031 Y8.705 I2.69 J-3.748 E.04675 G1 X18.93 Y8.377 E.01136 G3 X19.362 Y7.067 I1.803 J-.132 E.04696 G2 X20.365 Y6.084 I-2.69 J-3.748 E.04675 G1 X20.465 Y5.757 E.01136 G2 X20.033 Y4.446 I-1.803 J-.132 E.04696 G3 X19.031 Y3.464 I2.69 J-3.748 E.04675 G1 X18.93 Y3.136 E.01136 G3 X19.362 Y1.826 I1.803 J-.132 E.04696 G2 X20.365 Y.843 I-2.69 J-3.748 E.04675 G1 X20.465 Y.515 E.01136 G2 X19.64 Y-1.123 I-1.77 J-.136 E.06394 G3 X17.83 Y-.667 I-1.446 J-1.918 E.0636 G1 X17.772 Y-.14 E.01758 G1 X17.413 Y.515 E.02479 G2 X16.41 Y1.498 I2.69 J3.748 E.04675 G1 X16.31 Y1.826 E.01136 G2 X16.741 Y3.136 I1.803 J.132 E.04696 G3 X17.744 Y4.119 I-2.69 J3.748 E.04675 G1 X17.844 Y4.446 E.01136 G3 X17.413 Y5.757 I-1.803 J.132 E.04696 G2 X16.41 Y6.739 I2.69 J3.748 E.04675 G1 X16.31 Y7.067 E.01136 G2 X16.741 Y8.377 I1.803 J.132 E.04696 G3 X17.744 Y9.36 I-2.69 J3.748 E.04675 G1 X17.844 Y9.688 E.01136 G3 X17.413 Y10.998 I-1.803 J.132 E.04696 G2 X16.41 Y11.981 I2.69 J3.748 E.04675 G1 X16.31 Y12.308 E.01136 G1 X16.382 Y12.963 E.02187 G1 X16.564 Y13.295 E.01254 G3 X18.021 Y12.646 I1.763 J1.998 E.05375 G1 X20.539 Y-2.66 F30000 G1 F16200 G2 X20.221 Y-4.224 I-2.386 J-.329 E.05397 G2 X20.465 Y-4.726 I-.486 J-.546 E.01899 G2 X19.529 Y-6.487 I-2.202 J.041 E.06865 G1 X17.643 Y-6.487 E.06257 G3 X17.844 Y-6.036 I-.445 J.47 E.0168 G1 X17.733 Y-5.31 E.02439 G2 X16.367 Y-4.488 I.586 J2.52 E.05372 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.017 Y-5.049 G1 X17.733 Y-5.31 G1 X17.79 Y-5.685 ;WIPE_END G1 X13.22 Y.427 Z6 F30000 G1 X-2.945 Y22.045 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z6 F30000 G1 X-15.232 Y53.745 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 M73 P60 R32 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z6 F30000 G1 X-5.6 Y52.94 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27034 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42923 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.669 J.79 E.48819 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48877 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290588 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.319 Y46.157 Z6 F30000 G1 X-37.673 Y-1.168 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00199 G3 X-40.822 Y-2.27 I-1.075 J-1.862 E.12466 G3 X-38.982 Y-5.142 I2.022 J-.73 E.13071 G3 X-37.491 Y-1.295 I.181 J2.142 E.1834 G1 X-37.64 Y-1.191 E.00601 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.899 Y-1.506 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.492 E.00112 G3 X-39.673 Y-4.512 I-.878 J-1.507 E.1822 G3 X-38.955 Y-4.736 I.852 J1.469 E.02516 G3 X-37.741 Y-1.619 I.148 J1.738 E.14854 G1 X-37.866 Y-1.529 E.00513 G1 X-38.139 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.868 E.00023 G3 X-39.301 Y-4.211 I-.661 J-1.13 E.13206 G3 X-38.927 Y-4.302 I.532 J1.366 E.01189 G3 X-37.909 Y-2.046 I.119 J1.304 E.09962 G1 X-38.108 Y-1.894 E.00769 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.868 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.879 Y-2.261 ;WIPE_END G1 X-40.122 Y5.367 Z6 F30000 G1 X-40.472 Y16.354 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.506 Y16.309 E.00188 G3 X-40.822 Y15.73 I1.709 J-1.308 E.02198 G3 X-38.982 Y12.858 I2.023 J-.729 E.13069 G3 X-40.321 Y16.521 I.184 J2.144 E.28648 G1 X-40.445 Y16.384 E.00613 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.166 Y16.086 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.183 Y16.061 E.00099 G3 X-38.955 Y13.264 I1.383 J-1.061 E.12352 G3 X-38.201 Y16.637 I.149 J1.737 E.16621 G3 X-40.033 Y16.233 I-.599 J-1.637 E.0657 G1 X-40.139 Y16.115 E.00525 G1 X-39.838 Y15.799 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.843 Y15.801 E.00017 G3 X-39.301 Y13.789 I1.036 J-.8 E.07403 G3 X-38.927 Y13.698 I.532 J1.366 E.01189 G3 X-39.6 Y16.043 I.119 J1.303 E.15618 G1 X-39.81 Y15.828 E.00924 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.843 Y15.801 G1 X-39.935 Y15.655 G1 X-40.025 Y15.459 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.668 Y14.028 ;WIPE_END G1 X-38.026 Y6.575 Z6 F30000 G1 X-35.102 Y-6.698 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-6.075 Z6 F30000 G1 Z5.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.446 E.05401 G2 X-36.103 Y-3.416 I1.002 J1.587 E.044 G2 X-35.313 Y-1.785 I2.119 J-.02 E.06211 G1 X-35.313 Y.795 E.08558 G2 X-36.103 Y1.826 I1.002 J1.587 E.044 G2 X-35.313 Y3.456 I2.119 J-.02 E.06211 G1 X-35.313 Y6.036 E.08558 G2 X-36.103 Y7.067 I1.002 J1.587 E.044 G2 X-35.313 Y8.698 I2.119 J-.02 E.06211 G1 X-35.313 Y11.277 E.08558 G2 X-36.103 Y12.308 I1.002 J1.587 E.044 G2 X-35.313 Y13.939 I2.119 J-.02 E.06211 G1 X-35.313 Y16.519 E.08558 G2 X-36.103 Y17.55 I1.002 J1.587 E.044 G1 X-36.031 Y18.205 E.02187 G1 X-35.876 Y18.487 E.01067 G1 X-37.504 Y18.487 E.05401 G1 X-36.692 Y16.063 F30000 G1 F16200 G3 X-37.851 Y17.155 I-2.262 J-1.239 E.0537 G2 X-38.683 Y18.487 I1.264 J1.716 E.05335 G1 X-41.117 Y18.487 E.08076 G1 X-41.272 Y18.205 E.01067 G1 X-41.345 Y17.55 E.02187 G3 X-40.584 Y16.546 I1.751 J.536 E.04264 G3 X-41.162 Y15.058 I2.066 J-1.658 E.05376 G1 X-36.64 Y-2.055 F30000 G1 F16200 G3 X-37.732 Y-.894 I-2.22 J-.995 E.05386 G1 X-37.621 Y-.795 E.00495 G3 X-37.29 Y.843 I-1.406 J1.137 E.05762 G3 X-38.292 Y1.826 I-3.693 J-2.765 E.04675 G2 X-38.624 Y3.464 I1.406 J1.137 E.05762 G2 X-37.621 Y4.446 I3.693 J-2.765 E.04675 G3 X-37.29 Y6.084 I-1.406 J1.137 E.05762 G3 X-38.292 Y7.067 I-3.693 J-2.765 E.04675 G2 X-38.624 Y8.705 I1.406 J1.137 E.05762 G2 X-37.621 Y9.688 I3.693 J-2.765 E.04675 G3 X-37.29 Y11.326 I-1.406 J1.137 E.05762 G3 X-38.292 Y12.308 I-3.693 J-2.765 E.04675 G1 X-38.483 Y12.656 E.01316 G2 X-40.79 Y13.729 I-.263 J2.451 E.08867 G1 X-40.913 Y13.619 E.00548 G3 X-41.244 Y11.981 I1.406 J-1.137 E.05762 G3 X-40.242 Y10.998 I3.693 J2.765 E.04675 G2 X-39.91 Y9.36 I-1.406 J-1.137 E.05762 G2 X-40.913 Y8.377 I-3.693 J2.765 E.04675 G3 X-41.244 Y6.739 I1.406 J-1.137 E.05762 G3 X-40.242 Y5.757 I3.693 J2.765 E.04675 G2 X-39.91 Y4.119 I-1.406 J-1.137 E.05762 G2 X-40.913 Y3.136 I-3.693 J2.765 E.04675 G3 X-41.244 Y1.498 I1.406 J-1.137 E.05762 G3 X-40.242 Y.515 I3.693 J2.765 E.04675 G2 X-39.835 Y-.878 I-1.667 J-1.242 E.04919 G3 X-41.095 Y-2.438 I1.18 J-2.242 E.06836 G1 X-41.272 Y-2.76 E.01221 G1 X-41.345 Y-3.416 E.02187 G3 X-40.848 Y-4.184 I1.447 J.39 E.03083 G3 X-40.112 Y-4.963 I2.73 J1.843 E.03572 G2 X-40.011 Y-6.487 I-1.022 J-.833 E.05404 G1 X-38.125 Y-6.487 E.06257 G3 X-37.189 Y-4.728 I-1.266 J1.802 E.0686 G2 X-38.655 Y-5.356 I-1.728 J2.005 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-37.895 Y-5.186 G1 X-37.189 Y-4.728 G1 X-37.231 Y-5.105 ;WIPE_END G1 X-39.352 Y-10.052 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-41.325 Y-16.8 Z6 F30000 G1 X-41.81 Y-21.31 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-41.81 Y-20.569 E.02275 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-21.31 E.02275 G1 X-41.85 Y-21.31 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.027 Y-20.939 F30000 ;TYPE:Gap infill ;WIDTH:0.348214 G1 F12000 G1 X-50.372 Y-20.939 E.2076 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.372 Y-20.939 ;WIPE_END G1 X-41.81 Y-24.209 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-23.469 E.02275 G1 X-50.59 Y-23.469 E.26978 G1 X-50.59 Y-24.209 E.02275 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.027 Y-23.839 F30000 ;TYPE:Gap infill ;WIDTH:0.348218 G1 F12000 G1 X-50.372 Y-23.839 E.20761 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.372 Y-23.839 ;WIPE_END G1 X-49.174 Y-31.429 Z6 F30000 G1 X-51.352 Y-52.052 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:5.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.2 I-.53 J1.095 P1 F30000 G1 X49.794 Y-1.717 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00697 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.755 Y-1.709 E.01445 G1 X49.879 Y-1.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.0038 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.839 Y-1.282 E.01072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.39 Y-2.113 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00099 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.351 Y-2.12 I-.816 J-1.987 E.26312 G1 X50.433 Y-2.546 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00224 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.393 Y-2.55 E.01213 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.062 Y-1.549 ;WIPE_END G1 X49.095 Y-8.581 Z6.2 F30000 G1 X30.752 Y-52.052 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z6.2 F30000 G1 X18.752 Y-10.052 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.6 Y-3.605 Z6.2 F30000 G1 X18.828 Y-.943 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.92 E.00246 G3 X16.889 Y-4.709 I-.564 J-2.077 E.19676 G3 X18.022 Y-5.143 I1.324 J1.764 E.0408 G3 X19.024 Y-1.011 I.17 J2.146 E.20168 G1 X18.866 Y-.956 E.00555 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.697 Y-1.328 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.316 E.00157 G3 X17.327 Y-4.512 I-.459 J-1.682 E.16708 G3 X18.049 Y-4.736 I.851 J1.468 E.0253 G3 X18.867 Y-1.39 I.143 J1.738 E.16351 G1 X18.735 Y-1.342 E.00467 G1 X18.558 Y-1.742 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.539 Y-1.736 E.00063 G3 X17.699 Y-4.211 I-.346 J-1.262 E.12156 G3 X18.078 Y-4.302 I.528 J1.353 E.01202 G3 X18.853 Y-1.869 I.115 J1.304 E.10861 G1 X18.595 Y-1.758 E.00863 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.539 Y-1.736 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.971 Y-2.553 ;WIPE_END G1 X17.364 Y5.07 Z6.2 F30000 G1 X17.986 Y17.14 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.00224 G3 X16.889 Y13.291 I.274 J-2.134 E.16866 G3 X18.023 Y12.857 I1.324 J1.764 E.0408 G3 X18.2 Y17.154 I.17 J2.145 E.22967 G1 X18.026 Y17.143 E.00578 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.013 Y16.734 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00136 G3 X16.562 Y15.595 I.229 J-1.728 E.06317 G3 X18.049 Y13.264 I1.657 J-.583 E.10562 G3 X19.838 Y14.405 I.15 J1.738 E.07567 G3 X18.2 Y16.746 I-1.637 J.598 E.11112 G1 X18.053 Y16.737 E.00489 G1 X18.042 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.0004 G3 X17.699 Y13.789 I.164 J-1.299 E.10575 G3 X18.078 Y13.698 I.528 J1.353 E.01202 G3 X18.371 Y16.298 I.115 J1.304 E.12439 G1 X18.082 Y16.299 E.00889 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.974 Y15.455 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.894 Y14.936 ;WIPE_END G1 X16.055 Y7.35 Z6.2 F30000 G1 X14.502 Y-6.698 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.888 Y-6.487 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.03897 G1 X14.713 Y-6.033 E.01505 G3 X15.434 Y-4.398 I-1.681 J1.717 E.06073 G3 X14.713 Y-3.745 I-1.096 J-.485 E.03322 G1 X14.713 Y-.792 E.09796 G3 X15.434 Y.843 I-1.681 J1.717 E.06073 G3 X14.713 Y1.496 I-1.096 J-.485 E.03322 G1 X14.713 Y4.449 E.09796 G3 X15.434 Y6.084 I-1.681 J1.717 E.06073 G3 X14.713 Y6.738 I-1.096 J-.485 E.03322 G1 X14.713 Y9.691 E.09796 G3 X15.434 Y11.326 I-1.681 J1.717 E.06073 G3 X14.713 Y11.979 I-1.096 J-.485 E.03322 G1 X14.713 Y14.932 E.09796 G3 X15.434 Y16.567 I-1.681 J1.717 E.06073 G3 X14.713 Y17.22 I-1.096 J-.485 E.03322 G1 X14.713 Y18.487 E.04202 G1 X15.075 Y18.487 E.012 G1 X18.046 Y17.356 F30000 G1 F16200 G3 X16.583 Y16.722 I.273 J-2.636 E.05373 G2 X16.107 Y17.55 I.319 J.734 E.03394 G2 X16.537 Y18.487 I1.553 J-.145 E.03486 G1 X18.85 Y18.487 E.07671 G1 X18.942 Y18.205 E.00985 G1 X19.443 Y17.55 E.02736 G1 X20.46 Y16.894 E.04012 G2 X20.668 Y16.239 I-.372 J-.478 E.02424 G1 X20.474 Y15.646 E.0207 G2 X19.066 Y12.801 I-2.305 J-.63 E.11516 G1 X19.443 Y12.308 E.02058 G1 X20.46 Y11.653 E.04012 G2 X20.668 Y10.998 I-.372 J-.478 E.02424 G2 X19.952 Y9.688 I-2.228 J.366 E.05047 G1 X18.935 Y9.032 E.04012 G3 X18.728 Y8.377 I.372 J-.478 E.02424 G3 X19.443 Y7.067 I2.228 J.366 E.05047 G1 X20.46 Y6.412 E.04012 G2 X20.668 Y5.757 I-.372 J-.478 E.02424 G2 X19.952 Y4.446 I-2.228 J.366 E.05047 G1 X18.935 Y3.791 E.04012 G3 X18.728 Y3.136 I.372 J-.478 E.02424 G3 X19.443 Y1.826 I2.228 J.366 E.05047 G1 X20.46 Y1.171 E.04012 G2 X20.668 Y.515 I-.372 J-.478 E.02424 G2 X19.543 Y-1.058 I-2.432 J.549 E.06588 G3 X17.999 Y-.647 I-1.42 J-2.228 E.05387 G1 X17.833 Y-.14 E.01771 G1 X17.332 Y.515 E.02736 G1 X16.315 Y1.171 E.04012 G2 X16.107 Y1.826 I.372 J.478 E.02424 G2 X16.823 Y3.136 I2.228 J-.366 E.05047 G1 X17.839 Y3.791 E.04012 G3 X18.047 Y4.446 I-.372 J.478 E.02424 G3 X17.332 Y5.757 I-2.228 J-.366 E.05047 G1 X16.315 Y6.412 E.04012 G2 X16.107 Y7.067 I.372 J.478 E.02424 G2 X16.823 Y8.377 I2.228 J-.366 E.05047 G1 X17.839 Y9.032 E.04012 G3 X18.047 Y9.688 I-.372 J.478 E.02424 G3 X17.332 Y10.998 I-2.228 J-.366 E.05047 G1 X16.315 Y11.653 E.04012 G2 X16.107 Y12.308 I.372 J.478 E.02424 G2 X16.57 Y13.289 I1.631 J-.171 E.03667 G2 X15.853 Y14.714 I1.673 J1.735 E.05395 G1 X20.489 Y-2.406 F30000 G1 F16200 G2 X20.342 Y-3.995 I-2.627 J-.558 E.05374 G2 X20.675 Y-4.398 I-.288 J-.577 E.01788 G2 X19.253 Y-6.487 I-2.295 J.034 E.08876 G1 X17.974 Y-6.487 E.04244 G1 X18.054 Y-6.364 E.00488 G3 X17.833 Y-5.381 I-1.736 J.125 E.0339 G1 X17.784 Y-5.318 E.00264 G2 X16.401 Y-4.529 I.522 J2.522 E.0537 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.017 Y-5.049 G1 X17.784 Y-5.318 G1 X17.833 Y-5.381 G1 X17.926 Y-5.668 ;WIPE_END G1 X13.335 Y.429 Z6.2 F30000 G1 X-2.945 Y22.045 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z6.2 F30000 G1 X-15.232 Y53.745 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z6.2 F30000 G1 X-5.6 Y52.94 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27035 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 M73 P60 R31 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.672 J.79 E.48876 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290579 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.319 Y46.157 Z6.2 F30000 G1 X-37.673 Y-1.167 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.726 Y-1.14 E.00198 G3 X-40.111 Y-4.709 I-1.082 J-1.859 E.21528 G3 X-38.978 Y-5.143 I1.324 J1.764 E.0408 G3 X-37.493 Y-1.296 I.17 J2.144 E.18286 G1 X-37.641 Y-1.191 E.00603 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.899 Y-1.506 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.491 E.00109 G3 X-39.673 Y-4.512 I-.879 J-1.507 E.18228 G3 X-38.951 Y-4.736 I.851 J1.468 E.0253 G3 X-37.74 Y-1.618 I.143 J1.738 E.14844 G1 X-37.867 Y-1.529 E.00515 G1 X-38.14 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.87 E.00024 G3 X-39.301 Y-4.211 I-.66 J-1.13 E.132 G3 X-38.922 Y-4.302 I.528 J1.353 E.01202 G3 X-37.878 Y-2.078 I.115 J1.303 E.09807 G1 X-38.109 Y-1.894 E.00906 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.87 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.88 Y-2.262 ;WIPE_END G1 X-40.122 Y5.366 Z6.2 F30000 G1 X-40.472 Y16.354 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.506 Y16.309 E.00189 G3 X-38.977 Y12.857 I1.706 J-1.309 E.1528 G3 X-38.074 Y17.024 I.17 J2.144 E.20499 G3 X-40.32 Y16.52 I-.726 J-2.024 E.08058 G1 X-40.445 Y16.384 E.00612 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y16.086 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.19 Y16.067 E.00104 G3 X-39.673 Y13.488 I1.383 J-1.064 E.09883 G3 X-38.951 Y13.264 I.851 J1.468 E.0253 G3 X-40.039 Y16.239 I.144 J1.739 E.23193 G1 X-40.14 Y16.117 E.00526 G1 X-39.838 Y15.8 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.844 Y15.801 E.00019 G3 X-39.301 Y13.789 I1.036 J-.8 E.07404 G3 X-38.922 Y13.698 I.528 J1.353 E.01202 G3 X-39.6 Y16.043 I.115 J1.304 E.15604 G1 X-39.81 Y15.828 E.00921 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.844 Y15.801 G1 X-39.935 Y15.655 G1 X-40.026 Y15.455 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.672 Y14.025 ;WIPE_END G1 X-38.028 Y6.572 Z6.2 F30000 G1 X-35.102 Y-6.698 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-6.205 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.577 E.05401 G1 X-36.098 Y-4.071 E.03098 G2 X-36.306 Y-3.416 I.372 J.478 E.02424 G2 X-35.313 Y-1.927 I2.447 J-.556 E.0607 G1 X-35.313 Y.665 E.08595 G1 X-36.098 Y1.171 E.03098 G2 X-36.306 Y1.826 I.372 J.478 E.02424 G2 X-35.313 Y3.315 I2.447 J-.556 E.0607 G1 X-35.313 Y5.906 E.08595 G1 X-36.098 Y6.412 E.03098 G2 X-36.306 Y7.067 I.372 J.478 E.02424 G2 X-35.313 Y8.556 I2.447 J-.556 E.0607 G1 X-35.313 Y11.147 E.08595 G1 X-36.098 Y11.653 E.03098 G2 X-36.306 Y12.308 I.372 J.478 E.02424 G2 X-35.313 Y13.797 I2.447 J-.556 E.0607 G1 X-35.313 Y16.389 E.08595 G1 X-36.098 Y16.894 E.03098 G2 X-36.306 Y17.55 I.372 J.478 E.02424 G2 X-35.876 Y18.487 I1.553 J-.145 E.03486 G1 X-37.504 Y18.487 E.05401 G1 X-36.435 Y15.006 F30000 G1 F16200 G3 X-36.979 Y16.567 I-3.021 J-.179 E.05555 G1 X-37.194 Y16.894 E.013 G1 X-38.211 Y17.55 E.04012 G1 X-38.712 Y18.205 E.02736 G1 X-38.805 Y18.487 E.00985 G1 X-41.117 Y18.487 E.07671 G3 X-41.547 Y17.55 I1.122 J-1.082 E.03486 G3 X-41.34 Y16.894 I.579 J-.177 E.02424 G1 X-40.662 Y16.458 E.02675 G3 X-40.751 Y13.671 I1.872 J-1.455 E.09888 G3 X-41.547 Y12.308 I2.009 J-2.088 E.05301 G3 X-41.34 Y11.653 I.579 J-.177 E.02424 G1 X-40.323 Y10.998 E.04012 G2 X-39.607 Y9.688 I-1.512 J-1.676 E.05047 G2 X-39.815 Y9.032 I-.579 J-.177 E.02424 G1 X-40.832 Y8.377 E.04012 G3 X-41.547 Y7.067 I1.512 J-1.676 E.05047 G3 X-41.34 Y6.412 I.579 J-.177 E.02424 G1 X-40.323 Y5.757 E.04012 G2 X-39.607 Y4.446 I-1.512 J-1.676 E.05047 G2 X-39.815 Y3.791 I-.579 J-.177 E.02424 G1 X-40.832 Y3.136 E.04012 G3 X-41.547 Y1.826 I1.512 J-1.676 E.05047 G3 X-41.34 Y1.171 I.579 J-.177 E.02424 G1 X-40.323 Y.515 E.04012 G2 X-39.612 Y-.782 I-1.496 J-1.664 E.05003 G2 X-37.803 Y-.86 I.811 J-2.226 E.06163 G3 X-36.987 Y.515 I-1.912 J2.064 E.05378 G3 X-37.194 Y1.171 I-.579 J.177 E.02424 G1 X-38.211 Y1.826 E.04012 G2 X-38.927 Y3.136 I1.512 J1.676 E.05047 G2 X-38.719 Y3.791 I.579 J.177 E.02424 G1 X-37.702 Y4.446 E.04012 G3 X-36.987 Y5.757 I-1.512 J1.676 E.05047 G3 X-37.194 Y6.412 I-.579 J.177 E.02424 G1 X-38.211 Y7.067 E.04012 G2 X-38.927 Y8.377 I1.512 J1.676 E.05047 G2 X-38.719 Y9.032 I.579 J.177 E.02424 G1 X-37.702 Y9.688 E.04012 G3 X-36.987 Y10.998 I-1.512 J1.676 E.05047 G3 X-37.194 Y11.653 I-.579 J.177 E.02424 G1 X-38.211 Y12.308 E.04012 G1 X-38.478 Y12.657 E.01457 G3 X-37.065 Y13.398 I-.487 J2.646 E.05374 G1 X-40.228 Y-1.115 F30000 G1 F16200 G3 X-41.098 Y-2.454 I1.473 J-1.909 E.05398 G3 X-41.555 Y-3.743 I1.71 J-1.33 E.04616 G1 X-41.34 Y-4.071 E.013 G1 X-40.561 Y-4.573 E.03073 G2 X-39.607 Y-6.036 I-1.588 J-2.077 E.05908 G2 X-39.681 Y-6.487 I-.364 J-.172 E.0161 G1 X-38.401 Y-6.487 E.04244 G3 X-36.982 Y-4.507 I-.875 J2.127 E.08516 G2 X-38.355 Y-5.318 I-1.969 J1.766 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-37.617 Y-5.049 G1 X-36.982 Y-4.507 G1 X-36.987 Y-4.726 G1 X-37.037 Y-4.879 ;WIPE_END G1 X-39.352 Y-10.052 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-21.93 E.39085 G1 F2400 G1 X-40.81 Y-21.93 E.00645 G1 F600 G1 X-41.01 Y-21.93 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-42.11 Y-21.93 E.03649 G1 X-49.687 Y-21.93 E.25134 G1 X-51.09 Y-21.93 E.04654 G1 X-51.09 Y-22.848 E.03045 G1 X-49.687 Y-22.848 E.04654 G1 X-42.11 Y-22.848 E.25134 G1 X-41.01 Y-22.848 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-40.81 Y-22.848 E.00615 M106 S255 G1 F2400 G1 X-40.6 Y-22.848 E.00645 G1 F12000 G1 X-40.59 Y-48.79 E.79713 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.436 Y-16.844 Z6.2 F30000 G1 X-40.383 Y-22.389 Z6.2 G1 Z5.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.525714 G1 F12000 G1 X-50.872 Y-22.389 E.41269 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-22.389 ;WIPE_END G17 G3 Z6.2 I-.257 J1.19 P1 F30000 G1 X-41.81 Y-20.865 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.81 Y-20.569 E.00907 G1 X-50.59 Y-20.569 E.26978 G1 X-50.59 Y-20.865 E.00907 G1 X-41.85 Y-20.865 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.81 Y-20.569 G1 X-43.512 Y-20.569 ;WIPE_END G17 G3 Z6.2 I1.102 J.515 P1 F30000 G1 X-41.81 Y-24.209 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-41.81 Y-23.914 E.00907 G1 X-50.59 Y-23.914 E.26978 G1 X-50.59 Y-24.209 E.00907 G1 X-41.85 Y-24.209 E.26856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.81 Y-23.914 G1 X-43.512 Y-23.914 ;WIPE_END G1 X-45.561 Y-31.267 Z6.2 F30000 G1 X-51.352 Y-52.052 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.4 I-.53 J1.096 P1 F30000 G1 X49.822 Y-1.722 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00602 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.771 Y-1.712 E.01499 G1 X49.783 Y-1.714 E.00041 G1 X49.907 Y-1.296 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00292 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.855 Y-1.285 E.01123 G1 X49.868 Y-1.288 E.00038 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.388 Y-2.114 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00106 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.349 Y-2.12 I-.817 J-1.987 E.26305 G1 X50.431 Y-2.547 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.0023 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.391 Y-2.55 E.01207 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.061 Y-1.55 ;WIPE_END G1 X49.094 Y-8.582 Z6.4 F30000 G1 X30.752 Y-52.052 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z6.4 F30000 G1 X18.752 Y-10.052 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.595 Y-3.605 Z6.4 F30000 G1 X18.822 Y-.941 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.921 E.00226 G3 X16.889 Y-4.709 I-.564 J-2.077 E.19672 G3 X18.027 Y-5.143 I1.324 J1.763 E.04093 G3 X19.023 Y-1.012 I.166 J2.145 E.20148 G1 X18.86 Y-.954 E.00575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.691 Y-1.327 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.316 E.00138 G3 X17.327 Y-4.512 I-.459 J-1.682 E.16709 G3 X18.053 Y-4.737 I.851 J1.468 E.02543 G3 X18.867 Y-1.39 I.139 J1.738 E.16337 G1 X18.729 Y-1.34 E.00486 G1 X18.553 Y-1.74 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.539 Y-1.736 E.00044 G3 X17.699 Y-4.211 I-.346 J-1.262 E.12157 G3 X18.082 Y-4.303 I.525 J1.342 E.01215 G3 X18.853 Y-1.869 I.111 J1.304 E.10846 G1 X18.589 Y-1.755 E.00882 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.539 Y-1.736 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.273 Y-2.073 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.969 Y-2.559 ;WIPE_END G1 X17.367 Y5.063 Z6.4 F30000 G1 X17.997 Y17.141 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.0026 G3 X16.889 Y13.291 I.274 J-2.134 E.16866 G3 X18.027 Y12.857 I1.324 J1.763 E.04094 G3 X18.2 Y17.154 I.166 J2.145 E.22952 G1 X18.037 Y17.144 E.00542 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.024 Y16.735 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00171 G3 X17.327 Y13.488 I.22 J-1.73 E.14436 G3 X18.053 Y13.263 I.851 J1.468 E.02544 G3 X18.2 Y16.745 I.139 J1.738 E.18608 G1 X18.064 Y16.737 E.00453 G1 X18.053 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00075 G3 X17.699 Y13.789 I.163 J-1.299 E.10577 G3 X18.082 Y13.697 I.525 J1.342 E.01215 G3 X18.371 Y16.298 I.111 J1.304 E.12425 G1 X18.093 Y16.299 E.00854 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.896 Y14.948 ;WIPE_END G1 X16.057 Y7.361 Z6.4 F30000 G1 X14.502 Y-6.698 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.794 Y-6.487 Z6.4 F30000 G1 Z6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.03587 G1 X14.713 Y-5.94 E.01815 G1 X15.112 Y-5.638 E.01657 G1 X15.767 Y-4.637 E.03969 G2 X16.309 Y-4.419 I.432 J-.29 E.02058 G2 X15.864 Y-3.356 I2.633 J1.727 E.03844 G1 X15.767 Y-3.504 E.00588 G2 X14.713 Y-3.595 I-.588 J.659 E.03761 G1 X14.713 Y-.699 E.09609 G1 X15.112 Y-.397 E.01657 G1 X15.767 Y.604 E.03969 G1 X16.094 Y.824 E.01308 G2 X17.732 Y.117 I-.046 J-2.359 E.06068 G1 X18.225 Y-.636 E.02986 G2 X19.425 Y-.98 I-.051 J-2.445 E.04188 G1 X19.698 Y-.893 E.00948 G1 X20.353 Y-.397 E.02725 G1 X21.008 Y.604 E.03969 G1 X21.337 Y.824 E.01312 G1 X21.337 Y2.24 E.04697 G2 X20.68 Y1.517 I-1.181 J.414 E.03326 G2 X19.043 Y2.224 I.046 J2.359 E.06068 G1 X18.387 Y3.225 E.03969 G1 X18.06 Y3.444 E.01308 M73 P61 R31 G3 X16.422 Y2.738 I.046 J-2.359 E.06068 G1 X15.767 Y1.737 E.03969 G2 X14.713 Y1.646 I-.588 J.659 E.03761 G1 X14.713 Y4.543 E.09609 G1 X15.112 Y4.844 E.01657 G1 X15.767 Y5.845 E.03969 G1 X16.094 Y6.065 E.01308 G2 X17.732 Y5.359 I-.046 J-2.359 E.06068 G1 X18.387 Y4.358 E.03969 G1 X18.715 Y4.138 E.01308 G3 X20.353 Y4.844 I-.046 J2.359 E.06068 G1 X21.008 Y5.845 E.03969 G1 X21.337 Y6.065 E.01312 G1 X21.337 Y7.481 E.04697 G2 X20.68 Y6.759 I-1.181 J.414 E.03326 G2 X19.043 Y7.465 I.046 J2.359 E.06068 G1 X18.387 Y8.466 E.03969 G1 X18.06 Y8.686 E.01308 G3 X16.422 Y7.979 I.046 J-2.359 E.06068 G1 X15.767 Y6.978 E.03969 G2 X14.713 Y6.887 I-.588 J.659 E.03761 G1 X14.713 Y8.516 E.05401 G1 X15.851 Y14.75 F30000 G1 F16200 G3 X16.544 Y13.313 I2.395 J.269 E.05395 G1 X16.422 Y13.221 E.00506 G1 X15.767 Y12.22 E.03969 G2 X14.713 Y12.129 I-.588 J.659 E.03761 G1 X14.713 Y9.784 E.07777 G1 X15.112 Y10.086 E.01657 G1 X15.767 Y11.087 E.03969 G1 X16.094 Y11.306 E.01308 G2 X17.732 Y10.6 I-.046 J-2.359 E.06068 G1 X18.387 Y9.599 E.03969 G1 X18.715 Y9.379 E.01308 G3 X20.353 Y10.086 I-.046 J2.359 E.06068 G1 X21.008 Y11.087 E.03969 G1 X21.337 Y11.306 E.01312 G1 X21.337 Y12.722 E.04697 G2 X20.68 Y12 I-1.181 J.414 E.03326 G2 X19.043 Y12.706 I.046 J2.359 E.06068 G1 X18.996 Y12.777 E.00281 G3 X20.498 Y15.549 I-.853 J2.255 E.11397 G1 X21.008 Y16.328 E.0309 G1 X21.337 Y16.548 E.01312 G1 X21.337 Y17.963 E.04697 G2 X20.68 Y17.241 I-1.181 J.414 E.03326 G2 X18.69 Y18.487 I-.053 J2.128 E.08252 G1 X16.455 Y18.487 E.07413 G1 X15.767 Y17.461 E.04098 G2 X14.713 Y17.37 I-.588 J.659 E.03761 G1 X14.713 Y15.025 E.07777 G1 X15.112 Y15.327 E.01657 G1 X15.767 Y16.328 E.03969 G2 X16.416 Y16.546 I.485 J-.369 E.02411 G2 X17.805 Y17.328 I1.933 J-1.806 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.017 Y17.049 G1 X16.416 Y16.546 G1 X16.094 Y16.548 G1 X16.046 Y16.515 ;WIPE_END G1 X16.194 Y8.884 Z6.4 F30000 G1 X16.457 Y-4.593 Z6.4 G1 Z6 G1 E.8 F1800 G1 F16200 G3 X17.868 Y-5.331 I1.846 J1.811 E.0537 G1 X18.387 Y-6.125 E.03147 G3 X19.043 Y-6.343 I.488 J.374 E.02432 G3 X20.353 Y-5.638 I-.342 J2.208 E.05031 G1 X21.008 Y-4.637 E.03969 G1 X21.337 Y-4.418 E.01312 G1 X21.337 Y-3.002 E.04697 G2 X20.68 Y-3.724 I-1.181 J.414 E.03326 G1 X20.448 Y-3.723 E.00772 G2 X19.476 Y-4.987 I-2.483 J.903 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.077 Y-4.44 G1 X20.448 Y-3.723 G1 X20.68 Y-3.724 G1 X20.803 Y-3.642 ;WIPE_END G1 X15.622 Y1.962 Z6.4 F30000 G1 X-2.945 Y22.045 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z6.4 F30000 G1 X-15.232 Y53.745 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z6.4 F30000 G1 X-5.6 Y52.94 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.259 J1.929 E.17717 G3 X-5.368 Y53.745 I-.496 J-1.895 E.0928 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.4289 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48874 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290587 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01245 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z6.4 F30000 G1 X-3.671 Y51.454 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-8.016 Y46.426 Z6.4 F30000 G1 X-37.674 Y-1.167 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.726 Y-1.14 E.00196 G3 X-40.111 Y-4.709 I-1.082 J-1.859 E.21528 G3 X-38.973 Y-5.143 I1.324 J1.763 E.04093 G3 X-37.493 Y-1.296 I.166 J2.144 E.18272 G1 X-37.641 Y-1.19 E.00605 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.9 Y-1.506 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.491 E.00107 G3 X-39.673 Y-4.512 I-.879 J-1.507 E.18229 G3 X-38.947 Y-4.737 I.851 J1.468 E.02543 G3 X-37.74 Y-1.619 I.139 J1.739 E.14829 G1 X-37.867 Y-1.529 E.00517 G1 X-38.141 Y-1.868 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.87 E.00021 G3 X-39.301 Y-4.211 I-.66 J-1.129 E.13202 G3 X-38.918 Y-4.303 I.525 J1.342 E.01215 G3 X-37.878 Y-2.078 I.11 J1.304 E.09792 G1 X-38.109 Y-1.893 E.00909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.87 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.88 Y-2.263 ;WIPE_END G1 X-40.123 Y5.365 Z6.4 F30000 G1 X-40.471 Y16.355 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.506 Y16.309 E.0019 G3 X-40.825 Y15.722 I1.709 J-1.308 E.02225 G3 X-38.973 Y12.857 I2.026 J-.722 E.13069 G3 X-40.321 Y16.521 I.176 J2.144 E.28621 G1 X-40.445 Y16.384 E.00611 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y16.086 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.19 Y16.066 E.00104 G3 X-39.673 Y13.488 I1.382 J-1.064 E.09882 G3 X-38.947 Y13.263 I.851 J1.468 E.02544 G3 X-40.038 Y16.238 I.139 J1.739 E.23172 G1 X-40.14 Y16.117 E.00525 G1 X-39.837 Y15.8 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.844 Y15.801 E.00022 G3 X-39.301 Y13.789 I1.036 J-.8 E.07405 G3 X-38.918 Y13.697 I.525 J1.342 E.01215 G3 X-39.6 Y16.043 I.111 J1.304 E.15592 G1 X-39.809 Y15.829 E.00919 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.844 Y15.801 G1 X-39.935 Y15.655 G1 X-40.028 Y15.451 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.67 Y14.03 ;WIPE_END G1 X-38.027 Y6.576 Z6.4 F30000 G1 X-35.102 Y-6.698 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-6.274 Z6.4 F30000 G1 Z6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.645 E.05401 G1 X-35.991 Y-4.419 E.02371 G3 X-36.646 Y-4.637 I-.167 J-.592 E.02432 G1 X-37.301 Y-5.638 E.03969 G2 X-38.612 Y-6.343 I-1.653 J1.503 E.05031 G2 X-39.267 Y-6.125 I-.167 J.592 E.02432 G1 X-39.922 Y-5.124 E.03969 G3 X-41.232 Y-4.419 I-1.653 J-1.503 E.05031 G3 X-41.937 Y-4.713 I-.083 J-.793 E.02639 G1 X-41.937 Y-3.537 E.03898 G1 X-41.232 Y-2.503 E.04151 G1 X-41.086 Y-2.393 E.00608 G2 X-40.176 Y-1.08 I2.327 J-.642 E.054 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.677 Y-1.56 G1 X-40.851 Y-1.82 G1 X-41.086 Y-2.393 G1 X-41.232 Y-2.503 G1 X-41.34 Y-2.661 ;WIPE_END G1 X-37.112 Y-4.656 Z6.4 F30000 G1 Z6 G1 E.8 F1800 G1 F16200 G3 X-36.451 Y-3.206 I-1.963 J1.771 E.05372 G2 X-35.313 Y-2 I2.205 J-.941 E.05614 G1 X-35.336 Y.613 E.08669 G3 X-36.319 Y.824 I-.828 J-1.467 E.03385 G1 X-36.646 Y.604 E.01308 G1 X-37.301 Y-.397 E.03969 G1 X-37.869 Y-.827 E.02362 G3 X-39.382 Y-.709 I-.963 J-2.594 E.05097 G1 X-39.922 Y.117 E.03275 G3 X-41.56 Y.824 I-1.684 J-1.653 E.06068 G3 X-41.937 Y.529 I.16 J-.592 E.01631 G1 X-41.937 Y1.704 E.03898 G1 X-41.232 Y2.738 E.04151 G2 X-39.595 Y3.444 I1.684 J-1.653 E.06068 G1 X-39.267 Y3.225 E.01308 G1 X-38.612 Y2.224 E.03969 G3 X-36.974 Y1.517 I1.684 J1.653 E.06068 G1 X-36.646 Y1.737 E.01308 G1 X-35.991 Y2.738 E.03969 G1 X-35.313 Y3.241 E.02801 G1 X-35.336 Y5.854 E.08669 G3 X-36.319 Y6.065 I-.828 J-1.467 E.03385 G1 X-36.646 Y5.845 E.01308 G1 X-37.301 Y4.844 E.03969 G2 X-38.939 Y4.138 I-1.684 J1.653 E.06068 G1 X-39.267 Y4.358 E.01308 G1 X-39.922 Y5.359 E.03969 G3 X-41.56 Y6.065 I-1.684 J-1.653 E.06068 G3 X-41.937 Y5.77 I.16 J-.592 E.01631 G1 X-41.937 Y6.945 E.03898 G1 X-41.232 Y7.979 E.04151 G2 X-39.595 Y8.686 I1.684 J-1.653 E.06068 G1 X-39.267 Y8.466 E.01308 G1 X-38.612 Y7.465 E.03969 G3 X-36.974 Y6.759 I1.684 J1.653 E.06068 G1 X-36.646 Y6.978 E.01308 G1 X-35.991 Y7.979 E.03969 G1 X-35.313 Y8.482 E.02801 G1 X-35.336 Y11.096 E.08669 G3 X-36.319 Y11.306 I-.828 J-1.467 E.03385 G1 X-36.646 Y11.087 E.01308 G1 X-37.301 Y10.086 E.03969 G2 X-38.939 Y9.379 I-1.684 J1.653 E.06068 G1 X-39.267 Y9.599 E.01308 G1 X-39.922 Y10.6 E.03969 G3 X-41.56 Y11.306 I-1.684 J-1.653 E.06068 G3 X-41.937 Y11.011 I.16 J-.592 E.01631 G1 X-41.937 Y12.187 E.03898 G1 X-41.232 Y13.221 E.04151 G1 X-40.713 Y13.614 E.02161 G3 X-38.539 Y12.651 I1.92 J1.4 E.08259 G3 X-36.974 Y12 I1.6 J1.639 E.05761 G1 X-36.646 Y12.22 E.01308 G1 X-35.991 Y13.221 E.03969 G1 X-35.313 Y13.724 E.02801 G1 X-35.336 Y16.337 E.08669 G3 X-36.319 Y16.548 I-.828 J-1.467 E.03385 G3 X-36.747 Y16.174 I.226 J-.692 E.01936 G2 X-36.472 Y14.602 I-2.398 J-1.229 E.05374 G1 X-37.587 Y18.487 F30000 G1 F16200 G1 X-35.958 Y18.487 E.05401 G1 X-36.646 Y17.461 E.04098 G2 X-37.301 Y17.243 I-.488 J.374 E.02432 G2 X-38.965 Y18.487 I.55 J2.469 E.07099 G1 X-41.2 Y18.487 E.07413 G1 X-41.937 Y17.428 E.04281 G1 X-41.937 Y16.253 E.03898 G2 X-41.232 Y16.546 I.621 J-.5 E.02639 G1 X-40.716 Y16.381 E.01797 G3 X-41.156 Y14.848 I2.125 J-1.439 E.05381 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.085 Y15.612 G1 X-40.716 Y16.381 G1 X-41.078 Y16.496 ;WIPE_END G1 X-40.583 Y8.88 Z6.4 F30000 G1 X-39.352 Y-10.052 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.882 E.40593 G1 X-50.655 Y-21.882 E.34797 G1 X-50.655 Y-22.897 E.03365 G1 X-40.165 Y-22.897 E.34797 G1 X-40.155 Y-48.355 E.8445 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-21.447 E.37601 G1 F2400 G1 X-40.81 Y-21.447 E.00645 G1 F600 G1 X-41.01 Y-21.447 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-51.09 Y-21.447 E.33437 G1 X-51.09 Y-21.52 E.00242 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-51.09 Y-23.258 E.0534 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-51.09 Y-23.332 E.00245 G1 X-41.01 Y-23.332 E.33437 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-40.81 Y-23.332 E.00615 M106 S255 G1 F2400 G1 X-40.6 Y-23.332 E.00645 G1 F12000 G1 X-40.59 Y-48.79 E.78225 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.192 Y-16.837 Z6.4 F30000 G1 X-39.961 Y-22.389 Z6.4 G1 Z6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.650378 G1 F12000 G1 X-50.451 Y-22.389 E.51926 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.451 Y-22.389 ;WIPE_END G17 G3 Z6.4 I-.318 J1.175 P1 F30000 G1 X-41.789 Y-20.584 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.37852 G1 F12000 G1 X-41.789 Y-20.549 E.00097 G1 X-50.611 Y-20.549 E.24124 G1 X-50.611 Y-20.584 E.00097 G1 X-41.829 Y-20.584 E.24015 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.789 Y-20.549 G1 X-43.736 Y-20.549 ;WIPE_END G17 G3 Z6.4 I1.074 J.573 P1 F30000 G1 X-41.789 Y-24.195 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-50.611 Y-24.195 E.24124 G1 X-50.611 Y-24.23 E.00097 G1 X-41.794 Y-24.23 E.24112 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-43.794 Y-24.222 ;WIPE_END G1 X-45.794 Y-31.588 Z6.4 F30000 G1 X-51.352 Y-52.052 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:6.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.6 I-.53 J1.096 P1 F30000 G1 X49.835 Y-1.725 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00558 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.784 Y-1.715 E.01543 G1 X49.796 Y-1.717 E.00041 G1 X49.92 Y-1.298 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00251 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01575 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.868 Y-1.288 E.01163 G1 X49.881 Y-1.29 E.00038 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.386 Y-2.114 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00112 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.347 Y-2.12 I-.817 J-1.987 E.26298 G1 X50.429 Y-2.547 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00236 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.389 Y-2.551 E.01201 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.06 Y-1.552 ;WIPE_END G1 X49.093 Y-8.584 Z6.6 F30000 G1 X30.752 Y-52.052 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z6.6 F30000 G1 X18.752 Y-10.052 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.591 Y-3.605 Z6.6 F30000 G1 X18.817 Y-.939 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.921 E.00206 G3 X16.889 Y-4.709 I-.564 J-2.076 E.19672 G3 X18.031 Y-5.143 I1.323 J1.762 E.04107 G3 X19.023 Y-1.012 I.162 J2.146 E.20134 G1 X18.854 Y-.952 E.00595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.686 Y-1.325 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.651 Y-1.316 E.00118 G3 X17.327 Y-4.512 I-.459 J-1.682 E.1671 G3 X18.057 Y-4.737 I.851 J1.468 E.02557 G3 X18.867 Y-1.39 I.135 J1.739 E.16322 G1 X18.723 Y-1.338 E.00506 G1 X18.547 Y-1.737 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.539 Y-1.736 E.00025 G3 X17.699 Y-4.211 I-.347 J-1.262 E.12158 G3 X18.086 Y-4.303 I.522 J1.333 E.01227 G3 X18.853 Y-1.869 I.106 J1.305 E.10832 G1 X18.583 Y-1.753 E.00902 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.539 Y-1.736 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.967 Y-2.565 ;WIPE_END G1 X17.369 Y5.057 Z6.6 F30000 G1 X18.007 Y17.142 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.00294 G3 X16.889 Y13.291 I.274 J-2.134 E.16866 G3 X18.031 Y12.857 I1.323 J1.762 E.04107 G3 X18.2 Y17.154 I.162 J2.146 E.22937 G1 X18.047 Y17.144 E.00509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.034 Y16.735 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00205 G3 X17.327 Y13.488 I.22 J-1.73 E.14437 G3 X18.057 Y13.263 I.851 J1.468 E.02557 G3 X18.2 Y16.745 I.135 J1.739 E.18593 G1 X18.074 Y16.738 E.0042 G1 X18.064 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00107 G3 X17.699 Y13.789 I.163 J-1.299 E.10578 G3 X18.086 Y13.697 I.522 J1.333 E.01227 G3 X18.371 Y16.298 I.106 J1.305 E.1241 G1 X18.104 Y16.299 E.00821 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.971 Y15.448 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.892 Y14.958 ;WIPE_END G1 X16.055 Y7.372 Z6.6 F30000 G1 X14.502 Y-6.698 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.79 Y-6.487 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.03572 G1 X14.713 Y-5.935 E.01829 G1 X15.112 Y-5.72 E.01503 G1 X15.767 Y-4.993 E.03245 G2 X16.486 Y-4.627 I.811 J-.702 E.02747 G2 X15.839 Y-3.069 I1.978 J1.736 E.05698 G2 X14.713 Y-3.48 I-.828 J.518 E.0428 G1 X14.713 Y-.694 E.09243 G1 X15.112 Y-.478 E.01503 G2 X16.094 Y.518 I3.859 J-2.821 E.0466 G2 X17.732 Y.199 I.513 J-1.727 E.05756 G3 X18.551 Y-.663 I3.32 J2.335 E.03957 G2 X19.24 Y-.881 I-.39 J-2.431 E.02405 G1 X19.698 Y-.833 E.01527 G1 X20.353 Y-.478 E.02471 G2 X21.336 Y.518 I3.859 J-2.821 E.0466 G1 X21.337 Y2.458 E.06433 G2 X20.68 Y1.823 I-2.473 J1.9 E.03041 G2 X19.043 Y2.142 I-.513 J1.727 E.05756 G3 X18.06 Y3.139 I-3.859 J-2.821 E.0466 G3 X16.422 Y2.819 I-.513 J-1.727 E.05756 G1 X15.767 Y2.093 E.03245 G2 X14.713 Y1.761 I-.791 J.671 E.03864 G1 X14.713 Y4.547 E.09243 G1 X15.112 Y4.763 E.01503 G2 X16.094 Y5.76 I3.859 J-2.821 E.0466 G2 X17.732 Y5.44 I.513 J-1.727 E.05756 G3 X18.715 Y4.443 I3.859 J2.821 E.0466 G3 X20.353 Y4.763 I.513 J1.727 E.05756 G2 X21.336 Y5.76 I3.859 J-2.821 E.0466 G1 X21.337 Y7.699 E.06433 G2 X20.68 Y7.064 I-2.473 J1.9 E.03041 G2 X19.043 Y7.384 I-.513 J1.727 E.05756 G3 X18.06 Y8.38 I-3.859 J-2.821 E.0466 G3 X16.422 Y8.061 I-.513 J-1.727 E.05756 G1 X15.767 Y7.334 E.03245 G2 X14.713 Y7.002 I-.791 J.671 E.03864 G1 X14.713 Y8.631 E.05401 G1 X17.945 Y12.657 F30000 G1 F16200 G2 X16.508 Y13.349 I.383 J2.632 E.05372 G1 X15.767 Y12.576 E.03553 G2 X14.713 Y12.244 I-.791 J.671 E.03864 G1 X14.713 Y9.788 E.08144 G1 X15.112 Y10.004 E.01503 G2 X16.094 Y11.001 I3.859 J-2.821 E.0466 G2 X17.732 Y10.681 I.513 J-1.727 E.05756 G3 X18.715 Y9.685 I3.859 J2.821 E.0466 G3 X20.353 Y10.004 I.513 J1.727 E.05756 G2 X21.336 Y11.001 I3.859 J-2.821 E.0466 G1 X21.337 Y12.94 E.06433 G2 X20.68 Y12.305 I-2.473 J1.9 E.03041 G2 X19.043 Y12.625 I-.513 J1.727 E.05756 G1 X18.926 Y12.754 E.00575 G3 X20.521 Y15.432 I-.82 J2.302 E.11213 G2 X21.336 Y16.242 I3.144 J-2.346 E.03825 G1 X21.337 Y18.182 E.06433 G2 X20.353 Y17.443 I-1.531 J1.016 E.04161 G1 X19.698 Y17.511 E.02185 G2 X18.483 Y18.487 I.768 J2.201 E.0527 G1 X16.371 Y18.487 E.07005 G1 X15.767 Y17.817 E.02993 G2 X14.713 Y17.485 I-.791 J.671 E.03864 G1 X14.713 Y15.03 E.08144 G1 X15.112 Y15.245 E.01503 G1 X15.767 Y15.972 E.03245 G2 X16.217 Y16.281 I.606 J-.4 E.01856 G2 X17.483 Y17.25 I2.164 J-1.516 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X16.76 Y16.877 G1 X16.217 Y16.281 G1 X15.903 Y16.066 ;WIPE_END G1 X17.263 Y8.555 Z6.6 F30000 G1 X19.687 Y-4.836 Z6.6 G1 Z6.2 G1 E.8 F1800 G1 F16200 G3 X20.513 Y-3.471 I-1.753 J1.993 E.05373 G3 X21.337 Y-2.784 I-.799 J1.794 E.03605 G1 X21.337 Y-4.722 E.06431 G3 X20.353 Y-5.72 I3.534 J-4.472 E.04659 G2 X19.043 Y-6.142 I-1.165 J1.37 E.04687 G2 X18.013 Y-5.354 I.582 J1.826 E.0439 G3 X19.551 Y-4.936 I.11 J2.64 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X18.812 Y-5.285 G1 X18.013 Y-5.354 G1 X18.285 Y-5.619 ;WIPE_END G1 X13.638 Y.436 Z6.6 F30000 G1 X-2.945 Y22.045 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z6.6 F30000 G1 X-15.232 Y53.745 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28725 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z6.6 F30000 G1 X-5.6 Y52.94 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27035 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.171 J.901 E.4286 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48872 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290579 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01244 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.32 Y46.157 Z6.6 F30000 G1 X-37.674 Y-1.167 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00193 G3 X-40.111 Y-4.709 I-1.083 J-1.86 E.2154 G3 X-38.969 Y-5.143 I1.323 J1.762 E.04107 G3 X-37.492 Y-1.295 I.162 J2.146 E.18266 G1 X-37.642 Y-1.19 E.00607 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.9 Y-1.505 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.492 E.00105 G3 X-39.673 Y-4.512 I-.878 J-1.506 E.18223 G3 X-38.943 Y-4.737 I.851 J1.467 E.02557 G3 X-37.741 Y-1.619 I.135 J1.739 E.1481 G1 X-37.868 Y-1.528 E.00519 G1 X-38.142 Y-1.867 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.869 E.00017 G3 X-39.301 Y-4.211 I-.661 J-1.13 E.1321 G3 X-38.914 Y-4.303 I.522 J1.333 E.01227 G3 X-37.918 Y-2.038 I.106 J1.305 E.09956 G1 X-38.11 Y-1.892 E.00741 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.869 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.881 Y-2.264 ;WIPE_END G1 X-40.123 Y5.365 Z6.6 F30000 G1 X-40.471 Y16.355 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.513 Y16.314 E.00192 G3 X-40.111 Y13.291 I1.706 J-1.312 E.11245 G3 X-38.969 Y12.857 I1.323 J1.762 E.04107 G3 X-40.327 Y16.527 I.162 J2.146 E.28557 M73 P61 R30 G1 X-40.445 Y16.385 E.00613 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y16.086 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.19 Y16.067 E.00105 G3 X-39.673 Y13.488 I1.382 J-1.064 E.09883 G3 X-38.943 Y13.263 I.851 J1.468 E.02557 G3 X-40.039 Y16.239 I.135 J1.739 E.23163 G1 X-40.14 Y16.117 E.00524 G1 X-39.837 Y15.801 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.844 Y15.801 E.00023 G3 X-39.301 Y13.789 I1.036 J-.8 E.07406 G3 X-38.914 Y13.697 I.522 J1.333 E.01227 G3 X-39.6 Y16.043 I.106 J1.304 E.15576 G1 X-39.809 Y15.83 E.00917 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.844 Y15.801 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.673 Y14.026 ;WIPE_END G1 X-38.029 Y6.573 Z6.6 F30000 G1 X-35.102 Y-6.698 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-6.328 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.7 E.05401 G1 X-35.991 Y-4.62 E.02265 G1 X-36.319 Y-4.723 E.01139 G3 X-37.301 Y-5.72 I2.876 J-3.818 E.0466 G2 X-38.612 Y-6.142 I-1.165 J1.37 E.04687 G2 X-39.267 Y-5.769 I.133 J.994 E.02564 G3 X-40.24 Y-4.877 I-2.269 J-1.499 E.04424 G3 X-41.937 Y-5.048 I-.76 J-.966 E.06251 G1 X-41.937 Y-3.189 E.06166 G3 X-41.232 Y-2.422 I-2.239 J2.763 E.03467 G1 X-41.066 Y-2.332 E.00627 G2 X-40.124 Y-1.045 I2.515 J-.854 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.677 Y-1.56 G1 X-41.066 Y-2.332 G1 X-41.232 Y-2.422 G1 X-41.362 Y-2.563 ;WIPE_END G1 X-36.923 Y-4.44 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 G1 F16200 G3 X-36.439 Y-2.919 I-2.221 J1.543 E.05374 G2 X-35.313 Y-2.065 I2.295 J-1.857 E.04735 G1 X-35.313 Y.541 E.08644 G1 X-35.991 Y.621 E.02265 G3 X-36.646 Y.248 I.133 J-.994 E.02564 G1 X-37.301 Y-.478 E.03245 G1 X-37.911 Y-.809 E.023 G3 X-39.113 Y-.655 I-.91 J-2.342 E.04057 G2 X-39.922 Y.199 I2.48 J3.162 E.03918 G3 X-41.56 Y.518 I-1.125 J-1.407 E.05756 G3 X-41.937 Y.193 I.909 J-1.435 E.01657 G1 X-41.937 Y2.052 E.06166 G3 X-41.232 Y2.819 I-2.239 J2.763 E.03467 G2 X-39.595 Y3.139 I1.125 J-1.407 E.05756 G2 X-38.612 Y2.142 I-2.876 J-3.818 E.0466 G3 X-36.974 Y1.823 I1.125 J1.407 E.05756 G3 X-35.991 Y2.819 I-2.876 J3.818 E.0466 G1 X-35.313 Y3.177 E.02542 G1 X-35.313 Y5.782 E.08644 G1 X-35.991 Y5.863 E.02265 G3 X-36.646 Y5.489 I.133 J-.994 E.02564 G1 X-37.301 Y4.763 E.03245 G2 X-38.939 Y4.443 I-1.125 J1.407 E.05756 G2 X-39.922 Y5.44 I2.876 J3.818 E.0466 G3 X-41.56 Y5.76 I-1.125 J-1.407 E.05756 G3 X-41.937 Y5.435 I.909 J-1.435 E.01657 G1 X-41.937 Y7.294 E.06166 G3 X-41.232 Y8.061 I-2.239 J2.763 E.03467 G2 X-39.595 Y8.38 I1.125 J-1.407 E.05756 G2 X-38.612 Y7.384 I-2.876 J-3.818 E.0466 G3 X-36.974 Y7.064 I1.125 J1.407 E.05756 G3 X-35.991 Y8.061 I-2.876 J3.818 E.0466 G1 X-35.313 Y8.418 E.02542 G1 X-35.313 Y11.024 E.08644 G1 X-35.991 Y11.104 E.02265 G3 X-36.646 Y10.731 I.133 J-.994 E.02564 G1 X-37.301 Y10.004 E.03245 G2 X-38.939 Y9.685 I-1.125 J1.407 E.05756 G2 X-39.922 Y10.681 I2.876 J3.818 E.0466 G3 X-41.56 Y11.001 I-1.125 J-1.407 E.05756 G3 X-41.937 Y10.676 I.909 J-1.435 E.01657 G1 X-41.937 Y12.535 E.06166 G3 X-41.232 Y13.302 I-2.239 J2.763 E.03467 G1 X-40.698 Y13.591 E.02016 G3 X-38.612 Y12.625 I2.021 J1.627 E.07902 G3 X-36.974 Y12.305 I1.125 J1.407 E.05756 G3 X-35.991 Y13.302 I-2.876 J3.818 E.0466 G1 X-35.313 Y13.659 E.02542 G1 X-35.313 Y16.265 E.08644 G1 X-35.991 Y16.345 E.02265 G3 X-36.647 Y15.971 I.439 J-1.531 E.02528 G2 X-36.517 Y14.381 I-2.206 J-.98 E.05396 G1 X-39.498 Y17.256 F30000 G1 F16200 G3 X-40.772 Y16.298 I.879 J-2.495 E.05373 G3 X-41.937 Y15.917 I-.332 J-.957 E.04364 G1 X-41.937 Y17.776 E.06166 G3 X-41.283 Y18.487 I-2.074 J2.563 E.03214 G1 X-39.172 Y18.487 E.07005 G1 X-38.612 Y17.866 E.02773 G3 X-37.301 Y17.443 I1.165 J1.37 E.04687 G1 X-36.974 Y17.546 E.01139 G3 X-36.042 Y18.487 I-2.71 J3.618 E.04407 G1 X-37.67 Y18.487 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.042 Y18.487 G1 X-36.291 Y18.211 ;WIPE_END G1 X-36.934 Y10.606 Z6.6 F30000 G1 X-39.758 Y-22.797 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-47.948 E.83431 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.982 E.39574 G1 X-50.248 Y-21.982 E.34797 G1 X-50.248 Y-22.797 E.02703 G1 X-39.798 Y-22.797 E.34665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y-23.204 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-48.355 E.83431 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.575 E.39574 G1 X-50.655 Y-21.575 E.34797 G1 X-50.655 Y-23.204 E.05403 G1 X-40.205 Y-23.204 E.34665 G1 X-40.6 Y-23.639 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-48.79 E.77282 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-21.14 E.36658 G1 F2400 G1 X-40.81 Y-21.14 E.00645 G1 F1260 G1 X-41.65 Y-21.14 E.02581 G1 X-50.153 Y-21.14 E.26127 G1 X-51.09 Y-21.14 E.02879 M106 S255 G1 X-51.09 Y-22.077 E.02879 G1 F12000 G1 X-51.09 Y-22.702 E.0192 G1 F1260 G1 X-51.09 Y-23.639 E.02879 G1 X-50.153 Y-23.639 E.02879 G1 X-41.65 Y-23.639 E.26127 G1 X-40.81 Y-23.639 E.02581 M106 S255 G1 F2400 G1 X-40.64 Y-23.639 E.00522 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F2400 G1 X-40.636 Y-25.639 ;WIPE_END G1 X-39.556 Y-22.389 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.450566 G1 F12000 G1 X-50.044 Y-22.389 E.34842 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.044 Y-22.389 ;WIPE_END G17 G3 Z6.6 I1.209 J-.135 P1 F30000 G1 X-51.352 Y-52.052 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:6.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.8 I-.53 J1.096 P1 F30000 G1 X49.855 Y-1.729 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.0049 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.796 Y-1.717 E.01586 G1 X49.816 Y-1.721 E.00066 G1 X49.94 Y-1.302 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00188 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.881 Y-1.291 E.01204 G1 X49.901 Y-1.294 E.00061 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.384 Y-2.114 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00118 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.345 Y-2.12 I-.817 J-1.987 E.26292 G1 X50.427 Y-2.547 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00241 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.387 Y-2.551 E.01195 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.058 Y-1.553 ;WIPE_END G1 X45.2 Y-4.902 Z6.8 F30000 G1 X-51.352 Y-52.052 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.363 Y-44.258 Z6.8 F30000 G1 X-39.758 Y-23.031 Z6.8 G1 Z6.4 G1 E.8 F1800 M73 P62 R30 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-47.948 E.82654 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.748 E.38797 G1 X-50.248 Y-21.748 E.34797 G1 X-50.248 Y-23.031 E.04256 G1 X-39.798 Y-23.031 E.34665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y-23.438 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-48.355 E.82654 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.341 E.38797 G1 X-50.655 Y-21.341 E.34797 G1 X-50.655 Y-23.438 E.06957 G1 X-40.205 Y-23.438 E.34665 G1 X-40.6 Y-23.873 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-48.79 E.76563 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.906 E.35939 G1 F2400 G1 X-40.81 Y-20.906 E.00645 G1 F2100 G1 X-51.09 Y-20.906 E.31588 M106 S255 G1 X-51.09 Y-21.77 E.02655 G1 F12000 G1 X-51.09 Y-23.009 E.03807 G1 F2100 G1 X-51.09 Y-23.873 E.02655 G1 X-40.81 Y-23.873 E.31588 M106 S255 G1 F2400 G1 X-40.64 Y-23.873 E.00522 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F2400 G1 X-40.636 Y-25.873 ;WIPE_END G1 X-39.775 Y-22.17 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.480911 G1 F15000 G1 X-39.775 Y-22.608 E.01563 G1 X-49.825 Y-22.608 E.35872 G1 X-49.825 Y-22.17 E.01563 G1 X-39.815 Y-22.17 E.35729 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.815 Y-22.17 ;WIPE_END G1 X-40.339 Y-14.682 Z6.8 F30000 G1 X-37.675 Y-1.166 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.724 Y-1.137 E.00191 G3 X-40.111 Y-4.709 I-1.083 J-1.86 E.21546 G3 X-38.965 Y-5.144 I1.323 J1.761 E.04121 G3 X-37.491 Y-1.294 I.158 J2.147 E.18256 G1 X-37.642 Y-1.189 E.0061 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.901 Y-1.505 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.492 E.00103 G3 X-39.673 Y-4.512 I-.879 J-1.506 E.18223 G3 X-38.939 Y-4.737 I.851 J1.467 E.02571 G3 X-37.741 Y-1.619 I.131 J1.739 E.14796 G1 X-37.868 Y-1.528 E.00521 G1 X-38.142 Y-1.867 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.146 Y-1.868 E.00013 G3 X-39.301 Y-4.211 I-.662 J-1.13 E.13217 G3 X-38.91 Y-4.303 I.52 J1.325 E.0124 G3 X-37.877 Y-2.077 I.102 J1.305 E.09772 G1 X-38.111 Y-1.892 E.00917 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.146 Y-1.868 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.881 Y-2.265 ;WIPE_END G1 X-40.153 Y5.363 Z6.8 F30000 G1 X-40.541 Y16.263 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.663 Y16.076 E.00741 G3 X-40.739 Y14.071 I1.865 J-1.074 E.06922 G3 X-38.965 Y12.856 I1.94 J.93 E.07468 G3 X-40.507 Y16.31 I.167 J2.145 E.29528 G1 X-40.518 Y16.295 E.0006 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.203 Y16.037 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00654 G3 X-39.673 Y13.488 I1.509 J-.874 E.0912 G3 X-38.939 Y13.263 I.851 J1.467 E.02571 G3 X-40.184 Y16.072 I.131 J1.739 E.23868 G1 X-39.843 Y15.793 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.017 Y15.504 E.01037 G3 X-39.301 Y13.789 I1.209 J-.502 E.06349 G3 X-38.91 Y13.697 I.52 J1.325 E.0124 G3 X-39.826 Y15.826 I.102 J1.305 E.16537 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.017 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.66 Y14.022 ;WIPE_END G1 X-38.02 Y6.568 Z6.8 F30000 G1 X-35.102 Y-6.698 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-6.355 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.727 E.05401 G1 X-35.991 Y-4.773 E.02254 G1 X-36.646 Y-5.227 E.02644 G2 X-38.612 Y-5.989 I-1.594 J1.195 E.07369 G3 X-40.577 Y-4.719 I-6.333 J-7.643 E.07781 G1 X-41.232 Y-4.773 E.02181 G3 X-41.937 Y-5.271 I1.649 J-3.08 E.02869 G1 X-41.937 Y-2.949 E.07703 G3 X-41.232 Y-2.329 I-2.14 J3.141 E.03121 G1 X-41.043 Y-2.262 E.00668 G2 X-40.062 Y-1.004 I2.478 J-.921 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.677 Y-1.56 G1 X-41.043 Y-2.262 G1 X-41.232 Y-2.329 G1 X-41.367 Y-2.447 ;WIPE_END G1 X-36.823 Y-4.291 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 G1 F16200 G3 X-36.451 Y-2.74 I-2.284 J1.368 E.05373 G2 X-35.313 Y-2.1 I1.316 J-1.008 E.04452 G1 X-35.313 Y.514 E.08673 G1 X-35.991 Y.468 E.02254 G3 X-37.301 Y-.572 I3.524 J-5.786 E.05563 G1 X-37.944 Y-.797 E.02259 G3 X-38.774 Y-.636 I-.896 J-2.388 E.02816 G2 X-39.922 Y.292 I3.155 J5.08 E.04911 G3 X-41.232 Y.468 I-.853 J-1.378 E.04518 G3 X-41.937 Y-.03 I1.649 J-3.08 E.02869 G1 X-41.937 Y2.293 E.07703 G3 X-41.232 Y2.913 I-2.14 J3.141 E.03121 G2 X-39.922 Y3.089 I.853 J-1.378 E.04518 G2 X-38.612 Y2.049 I-3.525 J-5.786 E.05563 G3 X-37.301 Y1.873 I.853 J1.378 E.04518 G3 X-35.991 Y2.913 I-3.524 J5.786 E.05563 G1 X-35.313 Y3.141 E.02373 G1 X-35.313 Y5.756 E.08673 G1 X-35.991 Y5.71 E.02254 G3 X-37.301 Y4.67 I3.524 J-5.786 E.05563 G2 X-38.612 Y4.493 I-.853 J1.378 E.04518 G2 X-39.922 Y5.533 I3.524 J5.786 E.05563 G3 X-41.232 Y5.71 I-.853 J-1.378 E.04518 G3 X-41.937 Y5.212 I1.649 J-3.08 E.02869 G1 X-41.937 Y7.534 E.07703 G3 X-41.232 Y8.154 I-2.14 J3.141 E.03121 G2 X-39.922 Y8.33 I.853 J-1.378 E.04518 G2 X-38.612 Y7.29 I-3.524 J-5.786 E.05563 G3 X-37.301 Y7.114 I.853 J1.378 E.04518 G3 X-35.991 Y8.154 I-3.524 J5.786 E.05563 G1 X-35.313 Y8.382 E.02373 G1 X-35.313 Y10.997 E.08673 G1 X-35.991 Y10.951 E.02254 G3 X-37.301 Y9.911 I3.524 J-5.786 E.05563 G2 X-38.612 Y9.735 I-.853 J1.378 E.04518 G2 X-39.922 Y10.775 I3.524 J5.786 E.05563 G3 X-41.232 Y10.951 I-.853 J-1.378 E.04518 G3 X-41.937 Y10.453 I1.649 J-3.08 E.02869 G1 X-41.937 Y12.775 E.07703 G3 X-41.232 Y13.395 I-2.14 J3.141 E.03121 G1 X-40.694 Y13.585 E.01895 G3 X-38.731 Y12.639 I1.901 J1.436 E.07504 G1 X-38.612 Y12.532 E.00532 G3 X-37.301 Y12.355 I.853 J1.378 E.04518 G3 X-35.991 Y13.395 I-3.524 J5.786 E.05563 G1 X-35.313 Y13.624 E.02373 G1 X-35.313 Y16.238 E.08673 G1 X-35.991 Y16.192 E.02254 G1 X-36.58 Y15.784 E.02376 G2 X-36.581 Y14.192 I-2.45 J-.794 E.0537 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.434 Y15 G1 X-36.58 Y15.784 G1 X-36.267 Y16.001 ;WIPE_END G1 X-39.579 Y17.229 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 G1 F16200 G3 X-40.82 Y16.226 I.975 J-2.475 E.05373 G1 X-41.232 Y16.192 E.01373 G3 X-41.937 Y15.694 I1.649 J-3.08 E.02869 G1 X-41.937 Y18.016 E.07703 G3 X-41.4 Y18.487 I-1.622 J2.394 E.02375 G1 X-39.452 Y18.487 E.06462 G1 X-39.267 Y18.359 E.00745 G3 X-37.301 Y17.597 I1.594 J1.195 E.07369 G3 X-36.158 Y18.487 I-3.007 J5.039 E.04818 G1 X-37.787 Y18.487 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.158 Y18.487 G1 X-36.436 Y18.239 ;WIPE_END G1 X-32.522 Y24.792 Z6.8 F30000 G1 X-15.232 Y53.745 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z6.8 F30000 G1 X-5.6 Y52.94 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27035 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42904 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.672 J.79 E.4887 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.672 J-.79 E.4887 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290587 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z6.8 F30000 G1 X-2.945 Y22.045 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.878 Y17.21 Z6.8 F30000 G1 X18.811 Y-.937 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.757 Y-.922 E.00186 G3 X16.889 Y-4.709 I-.564 J-2.076 E.19667 G3 X18.035 Y-5.144 I1.323 J1.761 E.04121 G3 X19.023 Y-1.013 I.158 J2.146 E.20114 G1 X18.848 Y-.951 E.00615 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.68 Y-1.323 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.652 Y-1.314 E.00098 G3 X17.327 Y-4.512 I-.459 J-1.683 E.16721 G3 X18.061 Y-4.737 I.851 J1.467 E.02571 G3 X18.868 Y-1.389 I.131 J1.74 E.16318 G1 X18.718 Y-1.336 E.00527 G1 X18.541 Y-1.735 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.539 Y-1.736 E.00008 G3 X17.699 Y-4.211 I-.347 J-1.262 E.12159 G3 X18.09 Y-4.303 I.52 J1.325 E.0124 G3 X18.853 Y-1.869 I.102 J1.305 E.10818 G1 X18.577 Y-1.751 E.00922 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.539 Y-1.736 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.965 Y-2.571 ;WIPE_END G1 X17.371 Y5.051 Z6.8 F30000 G1 X18.016 Y17.142 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.138 E.00324 G3 X16.889 Y13.291 I.274 J-2.135 E.1687 G3 X18.035 Y12.856 I1.323 J1.761 E.04121 G3 X18.2 Y17.155 I.158 J2.147 E.2293 G1 X18.056 Y17.145 E.00479 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.043 Y16.736 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00235 G3 X17.327 Y13.488 I.22 J-1.73 E.14437 G3 X18.061 Y13.263 I.851 J1.467 E.02571 G3 X18.2 Y16.745 I.131 J1.739 E.18579 G1 X18.083 Y16.738 E.0039 G1 X18.073 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.301 E.00137 G3 X17.699 Y13.789 I.163 J-1.299 E.10582 G3 X18.09 Y13.697 I.52 J1.325 E.0124 G3 X18.371 Y16.299 I.102 J1.305 E.12401 G1 X18.113 Y16.299 E.00792 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.301 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.894 Y14.968 ;WIPE_END G1 X16.056 Y7.381 Z6.8 F30000 G1 X14.502 Y-6.698 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-2.34 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-.712 E.05401 G1 X15.112 Y-.572 E.01401 G2 X16.422 Y.468 I4.835 J-4.746 E.05563 G2 X17.732 Y.292 I.458 J-1.555 E.04518 G3 X19.043 Y-.748 I4.835 J4.746 E.05563 G3 X20.353 Y-.572 I.458 J1.555 E.04518 G2 X21.337 Y.242 I3.763 J-3.548 E.04247 G1 X21.337 Y2.621 E.0789 G2 X20.353 Y1.873 I-3.499 J3.581 E.04111 G2 X19.043 Y2.049 I-.458 J1.555 E.04518 G3 X17.732 Y3.089 I-4.835 J-4.746 E.05563 G3 X16.422 Y2.913 I-.458 J-1.555 E.04518 G2 X15.112 Y1.873 I-4.835 J4.746 E.05563 G1 X14.713 Y1.84 E.01326 G1 X14.713 Y4.53 E.08922 G1 X15.112 Y4.67 E.01401 G2 X16.422 Y5.71 I4.835 J-4.746 E.05563 G2 X17.732 Y5.533 I.458 J-1.555 E.04518 G3 X19.043 Y4.493 I4.835 J4.746 E.05563 G3 X20.353 Y4.67 I.458 J1.555 E.04518 G2 X21.337 Y5.484 I3.763 J-3.548 E.04247 G1 X21.337 Y7.862 E.0789 G2 X20.353 Y7.114 I-3.499 J3.581 E.04111 G2 X19.043 Y7.29 I-.458 J1.555 E.04518 G3 X17.732 Y8.33 I-4.835 J-4.746 E.05563 G3 X16.422 Y8.154 I-.458 J-1.555 E.04518 G2 X15.112 Y7.114 I-4.835 J4.746 E.05563 G1 X14.713 Y7.081 E.01326 G1 X14.713 Y8.71 E.05401 G1 X20.133 Y13.643 F30000 G1 F16200 G2 X18.831 Y12.721 I-2.133 J1.631 E.05374 G1 X19.043 Y12.532 E.00942 G3 X20.353 Y12.355 I.853 J1.378 E.04518 G3 X21.337 Y13.103 I-2.515 J4.329 E.04111 G1 X21.337 Y10.725 E.0789 G3 X20.353 Y9.911 I2.779 J-4.362 E.04247 G2 X19.043 Y9.735 I-.853 J1.378 E.04518 G2 X17.732 Y10.775 I3.524 J5.786 E.05563 G3 X16.422 Y10.951 I-.853 J-1.378 E.04518 G3 X15.112 Y9.911 I3.524 J-5.786 E.05563 G1 X14.713 Y9.771 E.01401 G1 X14.713 Y12.322 E.08464 G1 X15.112 Y12.355 E.01326 G3 X16.457 Y13.407 I-9.822 J13.942 E.05667 G2 X16.018 Y15.912 I1.861 J1.617 E.08863 G3 X15.112 Y15.152 I2.601 J-4.022 E.03933 G1 X14.713 Y15.012 E.01401 G1 X14.713 Y17.564 E.08464 G1 X15.112 Y17.597 E.01326 G3 X16.255 Y18.487 I-3.007 J5.039 E.04818 G1 X18.203 Y18.487 E.06462 G2 X19.043 Y17.773 I-2.449 J-3.732 E.03666 G3 X20.353 Y17.597 I.853 J1.378 E.04518 G3 X21.337 Y18.345 I-2.515 J4.329 E.04111 G1 X21.337 Y15.966 E.0789 G3 X20.543 Y15.322 I2.191 J-3.513 E.034 G3 X19.802 Y16.735 I-2.646 J-.487 E.05374 G1 X16.479 Y-1.382 F30000 G1 F16200 G3 X15.844 Y-2.845 I2.001 J-1.737 E.05373 G2 X15.112 Y-3.369 I-2.47 J2.683 E.02995 G1 X14.713 Y-3.401 E.01326 G1 X14.713 Y-5.953 E.08464 G1 X15.112 Y-5.813 E.01401 G2 X16.422 Y-4.773 I4.835 J-4.746 E.05563 G2 X17.017 Y-5.049 I.018 J-.742 E.02254 G3 X18.198 Y-5.366 I1.575 J3.51 E.04072 G3 X19.043 Y-5.989 I2.929 J3.084 E.03492 G3 X21.008 Y-5.227 I.371 J1.958 E.07369 G1 X21.337 Y-4.999 E.01327 G1 X21.337 Y-2.621 E.0789 G2 X20.551 Y-3.232 I-2.849 J2.854 E.03312 G2 X19.87 Y-4.675 I-2.402 J.25 E.05396 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.077 Y-4.44 G1 X20.386 Y-3.905 G1 X20.551 Y-3.232 G1 X20.847 Y-3.001 ;WIPE_END G1 X18.752 Y-10.052 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z6.8 F30000 G1 X30.752 Y-52.052 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:6.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7 I-1.135 J.44 P1 F30000 G1 X49.887 Y-1.735 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00382 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.809 Y-1.72 E.0163 G1 X49.848 Y-1.727 E.0013 G1 X49.972 Y-1.309 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00088 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.894 Y-1.293 E.01244 G1 X49.933 Y-1.301 E.0012 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.383 Y-2.114 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00124 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.343 Y-2.12 I-.817 J-1.987 E.26285 G1 X50.425 Y-2.547 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00247 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.385 Y-2.551 E.0119 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.057 Y-1.555 ;WIPE_END G1 X45.199 Y-4.904 Z7 F30000 G1 X-51.352 Y-52.052 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.347 Y-44.265 Z7 F30000 G1 X-39.758 Y-23.203 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-47.948 E.82085 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.576 E.38227 G1 X-50.248 Y-21.576 E.34797 G1 X-50.248 Y-23.203 E.05396 G1 X-39.798 Y-23.203 E.34665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y-23.61 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-48.355 E.82085 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.169 E.38227 G1 X-50.655 Y-21.169 E.34797 G1 X-50.655 Y-23.61 E.08096 G1 X-40.205 Y-23.61 E.34665 G1 X-40.6 Y-24.045 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-48.79 E.76034 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.734 E.3541 G1 F5880 G1 X-51.09 Y-20.734 E.32233 M106 S255 G1 X-51.09 Y-21.536 E.02464 G1 F12000 G1 X-51.09 Y-23.243 E.05245 G1 F5880 G1 X-51.09 Y-24.045 E.02464 G1 X-40.64 Y-24.045 E.3211 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F5880 G1 X-40.636 Y-26.045 ;WIPE_END G1 X-39.744 Y-21.968 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-39.744 Y-22.811 E.02588 G1 X-49.856 Y-22.811 E.3107 G1 X-49.856 Y-21.968 E.02588 G1 X-39.784 Y-21.968 E.30947 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.435 Y-22.389 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.508244 G1 F15000 G1 X-40.205 Y-22.389 E.34996 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-42.205 Y-22.389 ;WIPE_END G1 X-40.612 Y-14.925 Z7 F30000 G1 X-37.675 Y-1.166 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00189 G3 X-40.111 Y-4.709 I-1.083 J-1.86 E.21541 G3 X-38.961 Y-5.144 I1.322 J1.76 E.04134 G3 X-37.492 Y-1.295 I.154 J2.146 E.18238 G1 X-37.643 Y-1.189 E.00612 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.902 Y-1.504 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.93 Y-1.493 E.00102 G3 X-39.673 Y-4.512 I-.878 J-1.506 E.18217 G3 X-38.934 Y-4.738 I.851 J1.467 E.02584 G3 X-37.741 Y-1.62 I.126 J1.739 E.14777 G1 X-37.869 Y-1.528 E.00523 G1 X-38.143 Y-1.866 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.869 E.00014 G3 X-39.301 Y-4.211 I-.661 J-1.129 E.13211 G3 X-38.906 Y-4.303 I.518 J1.319 E.01252 G3 X-37.878 Y-2.078 I.098 J1.305 E.09754 G1 X-38.112 Y-1.891 E.0092 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.869 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.882 Y-2.266 ;WIPE_END G1 X-40.154 Y5.362 Z7 F30000 G1 X-40.542 Y16.262 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.669 Y16.079 E.00739 G3 X-40.111 Y13.291 I1.861 J-1.078 E.10305 G3 X-38.961 Y12.856 I1.322 J1.76 E.04134 G3 X-40.512 Y16.314 I.153 J2.145 E.29448 G1 X-40.522 Y16.297 E.00065 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.204 Y16.036 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00651 G3 X-39.673 Y13.488 I1.509 J-.874 E.09121 G3 X-38.934 Y13.262 I.851 J1.467 E.02584 G3 X-40.185 Y16.072 I.126 J1.739 E.23861 G1 X-39.843 Y15.792 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.017 Y15.504 E.01032 G3 X-39.301 Y13.789 I1.209 J-.502 E.06348 G3 X-38.906 Y13.696 I.518 J1.319 E.01252 G3 X-39.826 Y15.825 I.098 J1.305 E.16519 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.017 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.659 Y14.021 ;WIPE_END G1 X-38.02 Y6.567 Z7 F30000 G1 X-35.102 Y-6.698 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.738 Y-4.157 Z7 F30000 G1 Z6.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-36.476 Y-2.584 I-2.389 J1.207 E.05374 G1 X-35.991 Y-2.218 E.02013 G1 X-35.313 Y-2.111 E.02277 G1 X-35.313 Y-4.729 E.08687 G1 X-35.991 Y-4.895 E.02315 G1 X-36.646 Y-5.43 E.02805 G2 X-38.612 Y-5.867 I-1.286 J1.144 E.07135 G3 X-39.983 Y-5.049 I-2.375 J-2.421 E.05347 G3 X-40.577 Y-4.725 I-.849 J-.852 E.02276 G1 X-41.232 Y-4.895 E.02245 G2 X-41.937 Y-5.467 I-7.727 J8.801 E.0301 G1 X-41.937 Y-6.487 E.03384 G1 X-41.329 Y-6.487 E.02017 G1 X-39.989 Y-.955 F30000 G1 F16200 G3 X-41.011 Y-2.18 I1.213 J-2.052 E.05397 G1 X-41.232 Y-2.218 E.00745 G3 X-41.937 Y-2.752 I6.533 J-9.353 E.02933 G1 X-41.937 Y-.225 E.08382 G3 X-41.232 Y.346 I-7.022 J9.372 E.0301 G2 X-39.267 Y-.091 I.679 J-1.581 E.07135 G1 X-38.612 Y-.626 E.02805 G2 X-37.952 Y-.795 I-1.138 J-5.822 E.02261 G1 X-37.301 Y-.682 E.0219 G3 X-35.991 Y.346 I-12.607 J17.416 E.05526 G1 X-35.313 Y.512 E.02315 G1 X-35.313 Y3.131 E.08687 G1 X-35.991 Y3.023 E.02277 G3 X-37.301 Y1.995 I12.607 J-17.416 E.05526 G2 X-39.267 Y2.432 I-.679 J1.581 E.07135 G1 X-39.922 Y2.967 E.02805 G3 X-41.888 Y2.529 I-.679 J-1.581 E.07135 G1 X-41.937 Y2.489 E.00211 G1 X-41.937 Y5.016 E.08382 G3 X-41.232 Y5.588 I-7.022 J9.372 E.0301 G2 X-39.267 Y5.15 I.679 J-1.581 E.07135 G1 X-38.612 Y4.615 E.02805 G3 X-36.646 Y5.053 I.679 J1.581 E.07135 G1 X-35.991 Y5.588 E.02805 G1 X-35.313 Y5.753 E.02315 G1 X-35.313 Y8.372 E.08687 G1 X-35.991 Y8.264 E.02277 G3 X-37.301 Y7.236 I12.607 J-17.416 E.05526 G2 X-39.267 Y7.674 I-.679 J1.581 E.07135 G1 X-39.922 Y8.208 E.02805 G3 X-41.888 Y7.771 I-.679 J-1.581 E.07135 G1 X-41.937 Y7.73 E.00211 G1 X-41.937 Y10.257 E.08382 G3 X-41.232 Y10.829 I-7.022 J9.372 E.0301 G2 X-39.267 Y10.391 I.679 J-1.581 E.07135 G1 X-38.612 Y9.857 E.02805 G3 X-36.646 Y10.294 I.679 J1.581 E.07135 G1 X-35.991 Y10.829 E.02805 G1 X-35.313 Y10.995 E.02315 G1 X-35.313 Y13.613 E.08687 G1 X-35.991 Y13.505 E.02277 G3 X-37.301 Y12.477 I12.607 J-17.416 E.05526 G2 X-38.612 Y12.421 I-.717 J1.418 E.04485 G1 X-38.903 Y12.641 E.0121 G2 X-40.702 Y13.598 I.188 J2.524 E.06956 G1 X-41.232 Y13.505 E.01785 G3 X-41.937 Y12.972 I6.533 J-9.354 E.02933 G1 X-41.937 Y15.499 E.08382 G3 X-41.232 Y16.07 I-7.022 J9.372 E.0301 G1 X-40.856 Y16.168 E.01289 G3 X-41.126 Y14.595 I2.394 J-1.221 E.05374 G1 X-41.937 Y16.585 F30000 G1 F16200 G1 X-41.937 Y18.213 E.05401 G2 X-41.577 Y18.487 I3.713 J-4.5 E.01499 G1 X-39.672 Y18.487 E.0632 G1 X-39.267 Y18.156 E.01735 G3 X-37.301 Y17.719 I1.286 J1.144 E.07135 G2 X-36.336 Y18.487 I10.392 J-12.068 E.04094 G1 X-35.313 Y18.487 E.03394 G1 X-35.313 Y16.236 E.07467 G3 X-36.523 Y15.636 I.024 J-1.569 E.0463 G2 X-36.639 Y14.045 I-2.326 J-.631 E.05395 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.454 Y14.691 G1 X-36.454 Y15.309 G1 X-36.523 Y15.636 G1 X-36.232 Y15.874 ;WIPE_END G1 X-32.531 Y22.549 Z7 F30000 G1 X-15.232 Y53.745 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z7 F30000 G1 X-5.6 Y52.94 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27034 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42899 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42901 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.672 J.79 E.48871 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.29059 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z7 F30000 G1 X-3.671 Y51.454 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z7 F30000 G1 X-2.945 Y22.045 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.867 Y17.2 Z7 F30000 G1 X18.698 Y-.907 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.00733 G3 X16.889 Y-4.709 I-.289 J-2.132 E.18738 G3 X18.039 Y-5.144 I1.322 J1.76 E.04134 G3 X18.757 Y-.921 I.154 J2.146 E.2104 G1 X18.737 Y-.916 E.00069 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.619 Y-1.306 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.271 E.00644 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15954 G3 X18.066 Y-4.738 I.851 J1.467 E.02584 G3 X18.657 Y-1.318 I.126 J1.739 E.1703 G1 X18.534 Y-1.733 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.69 E.01034 G3 X17.699 Y-4.211 I-.008 J-1.309 E.11106 G3 X18.094 Y-4.303 I.518 J1.319 E.01252 G3 X18.571 Y-1.746 I.098 J1.305 E.11751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.962 Y-2.578 ;WIPE_END G1 X17.373 Y5.043 Z7 F30000 G1 X18.024 Y17.143 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.0035 G3 X16.889 Y13.291 I.274 J-2.134 E.16867 G3 X18.039 Y12.856 I1.322 J1.76 E.04134 G3 X18.2 Y17.154 I.154 J2.146 E.2291 G1 X18.064 Y17.145 E.00452 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.051 Y16.737 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.733 E.00262 G3 X17.327 Y13.488 I.22 J-1.731 E.14444 G3 X18.066 Y13.262 I.851 J1.467 E.02584 G3 X18.2 Y16.747 I.127 J1.74 E.18575 G1 X18.091 Y16.739 E.00364 G1 X18.082 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00163 G3 X17.699 Y13.789 I.163 J-1.299 E.10579 G3 X18.094 Y13.696 I.518 J1.319 E.01252 G3 X18.371 Y16.298 I.098 J1.305 E.12382 G1 X18.122 Y16.299 E.00766 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.968 Y15.44 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.891 Y14.976 ;WIPE_END G1 X16.055 Y7.39 Z7 F30000 G1 X14.502 Y-6.698 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.847 Y-6.487 Z7 F30000 G1 Z6.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.03761 G1 X14.713 Y-5.992 E.0164 G1 X15.112 Y-5.923 E.01341 G3 X16.422 Y-4.895 I-12.607 J17.416 E.05526 G1 X16.699 Y-4.823 E.00948 G3 X18.411 Y-5.352 I1.505 J1.835 E.06096 G3 X20.353 Y-5.923 I1.399 J1.169 E.07118 G3 X21.337 Y-5.161 I-9.336 J13.074 E.04129 G1 X21.337 Y-6.487 E.04398 G1 X21.034 Y-6.487 E.01004 G1 X19.973 Y-4.559 F30000 G1 F16200 G3 X20.561 Y-3.077 I-2.054 J1.673 E.05373 G2 X21.337 Y-2.464 I8.291 J-9.704 E.03281 G1 X21.337 Y.08 E.0844 G2 X20.353 Y-.682 I-10.32 J12.312 E.04129 G2 X18.387 Y-.091 I-.544 J1.757 E.07222 G1 X17.732 Y.402 E.02721 G3 X15.767 Y-.188 I-.544 J-1.757 E.07222 G1 X15.112 Y-.682 E.02721 G1 X14.713 Y-.751 E.01341 G1 X14.713 Y-3.35 E.08621 G1 X15.112 Y-3.247 E.01365 G2 X15.865 Y-2.638 I8.228 J-9.415 E.03214 G2 X16.629 Y-1.238 I2.609 J-.515 E.05373 G1 X14.713 Y.263 F30000 G1 F16200 G1 X14.713 Y1.891 E.05401 G1 X15.112 Y1.995 E.01365 G1 X15.767 Y2.529 E.02805 G2 X17.732 Y2.967 I1.286 J-1.144 E.07135 G1 X18.387 Y2.432 E.02805 G3 X20.353 Y1.995 I1.286 J1.144 E.07135 G2 X21.337 Y2.777 I10.584 J-12.302 E.04171 G1 X21.337 Y5.321 E.0844 G1 X21.008 Y5.053 E.01408 G2 X19.043 Y4.615 I-1.286 J1.144 E.07135 G1 X18.387 Y5.15 E.02805 G3 X16.422 Y5.588 I-1.286 J-1.144 E.07135 G2 X15.112 Y4.559 I-13.917 J16.387 E.05526 G1 X14.713 Y4.49 E.01341 G1 X14.713 Y7.133 E.08766 G1 X15.112 Y7.236 E.01365 G1 X15.767 Y7.771 E.02805 G2 X17.732 Y8.208 I1.286 J-1.144 E.07135 G1 X18.387 Y7.674 E.02805 G3 X20.353 Y7.236 I1.286 J1.144 E.07135 G2 X21.337 Y8.018 I10.584 J-12.302 E.04171 G1 X21.337 Y10.563 E.0844 G1 X21.008 Y10.294 E.01408 G2 X19.043 Y9.857 I-1.286 J1.144 E.07135 G1 X18.387 Y10.391 E.02805 G3 X16.422 Y10.829 I-1.286 J-1.144 E.07135 G2 X15.112 Y9.801 I-13.917 J16.387 E.05526 G1 X14.713 Y9.732 E.01341 G1 X14.713 Y12.374 E.08766 G1 X15.112 Y12.477 E.01365 G2 X16.391 Y13.482 I13.603 J-16.002 E.05398 G2 X15.936 Y15.673 I1.818 J1.521 E.07732 G2 X15.112 Y15.042 I-8.555 J10.313 E.03444 G1 X14.713 Y14.973 E.01341 G1 X14.713 Y17.615 E.08766 G1 X15.112 Y17.719 E.01365 G2 X16.077 Y18.487 I10.392 J-12.068 E.04094 G1 X17.982 Y18.487 E.0632 G1 X18.387 Y18.156 E.01735 G3 X20.353 Y17.719 I1.286 J1.144 E.07135 G2 X21.318 Y18.487 I10.392 J-12.068 E.04094 G1 X19.69 Y18.487 E.05401 G1 X19.896 Y16.647 F30000 G1 F16200 G2 X20.553 Y15.193 I-1.995 J-1.777 E.05373 G3 X21.337 Y15.804 I-7.49 J10.415 E.03297 G1 X21.337 Y13.26 E.0844 G1 X21.008 Y13.012 E.01366 G2 X19.043 Y12.421 I-1.422 J1.167 E.07222 G1 X18.686 Y12.69 E.01479 G3 X20.046 Y13.524 I-.65 J2.583 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X19.383 Y12.951 G1 X18.686 Y12.69 G1 X18.99 Y12.461 ;WIPE_END G1 X18.909 Y4.829 Z7 F30000 G1 X18.752 Y-10.052 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z7 F30000 G1 X30.752 Y-52.052 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:6.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.2 I-1.135 J.44 P1 F30000 G1 X49.908 Y-1.739 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00311 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 M73 P62 R29 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.822 Y-1.722 E.01674 G1 X49.869 Y-1.732 E.00158 G1 X49.993 Y-1.313 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-1.314 E.00022 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.907 Y-1.296 E.01285 G1 X49.954 Y-1.305 E.00146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.381 Y-2.114 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.0013 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.341 Y-2.12 I-.817 J-1.987 E.26279 M73 P63 R29 G1 X50.423 Y-2.547 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00252 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.384 Y-2.551 E.01184 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.056 Y-1.556 ;WIPE_END G1 X45.198 Y-4.905 Z7.2 F30000 G1 X-51.352 Y-52.052 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.334 Y-44.271 Z7.2 F30000 G1 X-39.758 Y-23.347 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-47.948 E.81607 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.432 E.37749 G1 X-50.248 Y-21.432 E.34797 G1 X-50.248 Y-23.347 E.06352 G1 X-39.798 Y-23.347 E.34665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y-23.754 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-48.355 E.81607 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.025 E.37749 G1 X-50.655 Y-21.025 E.34797 G1 X-50.655 Y-23.754 E.09052 G1 X-40.205 Y-23.754 E.34665 G1 X-40.6 Y-24.189 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-48.79 E.75592 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.59 E.34968 G1 F8400 G1 X-41.22 Y-20.59 E.01905 G1 X-50.316 Y-20.59 E.27949 G1 X-51.09 Y-20.59 E.02378 G1 X-51.09 Y-21.364 E.02378 G1 F12000 G1 X-51.09 Y-23.415 E.06302 G1 F8400 G1 X-51.09 Y-24.189 E.02378 G1 X-50.316 Y-24.189 E.02378 G1 X-41.298 Y-24.189 E.2771 G1 X-40.64 Y-24.189 E.02022 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F8400 G1 X-40.636 Y-26.189 ;WIPE_END G1 X-39.744 Y-21.824 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-39.744 Y-22.955 E.03474 G1 X-49.856 Y-22.955 E.3107 G1 X-49.856 Y-21.824 E.03474 G1 X-39.784 Y-21.824 E.30947 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.121 Y-22.201 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419693 G1 F15000 G1 X-40.121 Y-22.578 E.01157 G1 X-49.479 Y-22.578 E.28731 G1 X-49.479 Y-22.201 E.01157 G1 X-40.161 Y-22.201 E.28608 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-42.161 Y-22.201 ;WIPE_END G1 X-40.569 Y-14.736 Z7.2 F30000 G1 X-37.676 Y-1.166 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.138 E.00187 G3 X-40.111 Y-4.709 I-1.083 J-1.86 E.21541 G3 X-38.957 Y-5.144 I1.322 J1.759 E.04148 G3 X-37.492 Y-1.295 I.149 J2.147 E.18224 G1 X-37.643 Y-1.189 E.00614 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.902 Y-1.504 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.492 E.00099 G3 X-39.673 Y-4.512 I-.879 J-1.506 E.18224 G3 X-38.93 Y-4.738 I.851 J1.467 E.02598 G3 X-37.741 Y-1.619 I.122 J1.739 E.14768 G1 X-37.87 Y-1.527 E.00525 G1 X-38.144 Y-1.866 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.147 Y-1.869 E.00014 G3 X-39.301 Y-4.211 I-.661 J-1.129 E.13212 G3 X-38.902 Y-4.304 I.517 J1.314 E.01265 G3 X-37.878 Y-2.078 I.093 J1.305 E.09741 G1 X-38.113 Y-1.891 E.00923 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.147 Y-1.869 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.878 Y-2.269 ;WIPE_END G1 X-40.152 Y5.358 Z7.2 F30000 G1 X-40.543 Y16.261 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.67 Y16.08 E.00737 G3 X-40.111 Y13.291 I1.863 J-1.077 E.10308 G3 X-38.957 Y12.856 I1.322 J1.76 E.04148 G3 X-40.513 Y16.315 I.149 J2.147 E.29452 G1 X-40.523 Y16.296 E.00069 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.204 Y16.035 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00648 G3 X-39.673 Y13.488 I1.509 J-.874 E.09121 G3 X-38.93 Y13.262 I.851 J1.467 E.02598 G3 X-40.186 Y16.071 I.122 J1.739 E.23846 G1 X-39.844 Y15.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.017 Y15.504 E.01028 G3 X-39.301 Y13.789 I1.209 J-.502 E.06348 G3 X-38.902 Y13.696 I.517 J1.314 E.01265 G3 X-39.827 Y15.824 I.093 J1.305 E.16506 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.017 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.662 Y14.017 ;WIPE_END G1 X-38.021 Y6.563 Z7.2 F30000 G1 X-35.102 Y-6.698 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.65 Y-3.978 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-36.515 Y-2.388 I-2.507 J1.014 E.05374 G2 X-35.991 Y-2.083 I.74 J-.669 E.02042 G1 X-35.313 Y-2.097 E.0225 G1 X-35.313 Y-4.707 E.08659 G1 X-35.991 Y-4.996 E.02445 G2 X-36.974 Y-5.921 I-6.982 J6.435 E.0448 G2 X-39.04 Y-5.345 I-.679 J1.557 E.077 G2 X-40.24 Y-4.877 I.413 J2.833 E.04311 G3 X-40.577 Y-4.707 I-.264 J-.105 E.01369 G1 X-41.232 Y-4.996 E.02375 G2 X-41.937 Y-5.683 I-5.175 J4.6 E.03267 G1 X-41.937 Y-6.487 E.02665 G1 X-41.112 Y-6.487 E.02736 G1 X-41.063 Y-3.678 F30000 G1 F16200 G2 X-40.981 Y-2.084 I2.315 J.68 E.05396 G3 X-41.888 Y-2.5 I-.029 J-1.133 E.03427 G1 X-41.937 Y-2.549 E.00229 G1 X-41.937 Y-.442 E.06989 G3 X-41.232 Y.245 I-4.471 J5.288 E.03267 G2 X-39.595 Y.4 I.963 J-1.45 E.05684 G2 X-38.612 Y-.525 I-5.999 J-7.36 E.0448 G3 X-37.301 Y-.817 I1.082 J1.766 E.04535 G3 X-36.646 Y-.4 I-.327 J1.236 E.02618 G1 X-35.991 Y.245 E.0305 G1 X-35.313 Y.534 E.02445 G1 X-35.313 Y3.145 E.08659 G1 X-35.991 Y3.158 E.0225 G3 X-36.646 Y2.741 I.327 J-1.236 E.02618 G1 X-37.301 Y2.096 E.0305 G2 X-38.939 Y1.941 I-.963 J1.45 E.05684 G2 X-39.922 Y2.866 I5.999 J7.36 E.0448 G3 X-41.56 Y3.021 I-.963 J-1.45 E.05684 G3 X-41.937 Y2.693 I2.115 J-2.809 E.01659 G1 X-41.937 Y4.799 E.06989 G3 X-41.232 Y5.486 I-4.471 J5.288 E.03267 G2 X-39.595 Y5.641 I.963 J-1.45 E.05684 G2 X-38.612 Y4.717 I-5.999 J-7.36 E.0448 G3 X-36.974 Y4.562 I.963 J1.45 E.05684 G3 X-35.991 Y5.486 I-5.999 J7.36 E.0448 G1 X-35.313 Y5.776 E.02445 G1 X-35.313 Y8.386 E.08659 G1 X-35.991 Y8.4 E.0225 G3 X-36.646 Y7.982 I.327 J-1.236 E.02618 G1 X-37.301 Y7.337 E.0305 G2 X-38.939 Y7.182 I-.963 J1.45 E.05684 G2 X-39.922 Y8.107 I5.999 J7.36 E.0448 G3 X-41.56 Y8.262 I-.963 J-1.45 E.05684 G3 X-41.937 Y7.934 I2.114 J-2.809 E.01659 G1 X-41.937 Y10.041 E.06989 G3 X-41.232 Y10.728 I-4.471 J5.288 E.03267 G2 X-39.595 Y10.883 I.963 J-1.45 E.05684 G2 X-38.612 Y9.958 I-5.999 J-7.36 E.0448 G3 X-36.974 Y9.803 I.963 J1.45 E.05684 G3 X-35.991 Y10.728 I-5.999 J7.36 E.0448 G1 X-35.313 Y11.017 E.02445 G1 X-35.313 Y13.627 E.08659 G1 X-35.991 Y13.641 E.0225 G3 X-36.646 Y13.224 I.327 J-1.236 E.02618 G1 X-37.301 Y12.578 E.0305 G2 X-38.939 Y12.424 I-.963 J1.45 E.05684 G1 X-39.25 Y12.688 E.01353 G2 X-40.729 Y13.638 I.424 J2.289 E.05981 G3 X-41.937 Y13.175 I-.258 J-1.134 E.04549 G1 X-41.937 Y15.282 E.06989 G3 X-41.232 Y15.969 I-4.471 J5.288 E.03267 G1 X-40.877 Y16.126 E.01289 G3 X-41.117 Y14.549 I2.382 J-1.17 E.05373 G1 X-41.446 Y18.487 F30000 G1 F16200 G1 X-39.818 Y18.487 E.05401 G3 X-38.939 Y17.665 I6.208 J5.753 E.03994 G3 X-37.301 Y17.82 I.675 J1.605 E.05684 G2 X-36.621 Y18.487 I5.023 J-4.445 E.03165 G1 X-35.313 Y18.487 E.04337 G1 X-35.313 Y16.258 E.07393 G3 X-36.488 Y15.479 I.852 J-2.563 E.04731 G2 X-36.71 Y13.901 I-2.608 J-.439 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.454 Y14.691 G1 X-36.488 Y15.479 G1 X-36.218 Y15.746 ;WIPE_END G1 X-32.528 Y22.427 Z7.2 F30000 G1 X-15.232 Y53.745 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z7.2 F30000 G1 X-5.6 Y52.94 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.259 J1.929 E.17717 G3 X-5.368 Y53.745 I-.496 J-1.895 E.0928 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42904 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42898 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48868 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290579 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00942 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z7.2 F30000 G1 X-2.945 Y22.045 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.867 Y17.199 Z7.2 F30000 G1 X18.693 Y-.906 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.864 E.00716 G3 X16.889 Y-4.709 I-.289 J-2.133 E.18742 G3 X18.043 Y-5.144 I1.322 J1.759 E.04148 G3 X18.757 Y-.92 I.15 J2.147 E.21031 G1 X18.732 Y-.915 E.00086 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.614 Y-1.305 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.271 E.00627 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15954 G3 X18.07 Y-4.738 I.851 J1.467 E.02598 G3 X18.652 Y-1.316 I.122 J1.739 E.17033 G1 X18.529 Y-1.732 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.701 E.00494 G3 X17.699 Y-4.211 I-.179 J-1.297 E.11639 G3 X18.098 Y-4.304 I.517 J1.314 E.01265 G3 X18.567 Y-1.743 I.094 J1.306 E.11758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.701 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.961 Y-2.582 ;WIPE_END G1 X17.374 Y5.039 Z7.2 F30000 G1 X18.031 Y17.143 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.00372 G3 X16.889 Y13.291 I.274 J-2.134 E.16866 G3 X18.043 Y12.856 I1.322 J1.76 E.04148 G3 X18.2 Y17.154 I.149 J2.146 E.22894 G1 X18.071 Y17.146 E.0043 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.057 Y16.737 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.732 E.00283 G3 X17.327 Y13.488 I.22 J-1.73 E.14439 G3 X18.07 Y13.262 I.851 J1.467 E.02598 G3 X18.2 Y16.745 I.122 J1.74 E.18552 G1 X18.097 Y16.739 E.00342 G1 X18.089 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.301 E.00184 G3 X17.699 Y13.789 I.163 J-1.299 E.1058 G3 X18.098 Y13.696 I.517 J1.314 E.01265 G3 X18.371 Y16.298 I.094 J1.306 E.1237 G1 X18.129 Y16.299 E.00744 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.301 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.983 ;WIPE_END G1 X16.061 Y7.397 Z7.2 F30000 G1 X14.502 Y-6.698 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.911 Y-6.487 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.03974 G1 X14.713 Y-6.056 E.01428 G3 X15.439 Y-5.921 I.204 J.918 E.02518 G3 X16.422 Y-4.996 I-5.999 J7.36 E.0448 G1 X16.737 Y-4.857 E.01143 G3 X18.598 Y-5.328 I1.555 J2.235 E.06506 G3 X20.353 Y-6.059 I1.552 J1.254 E.06574 G3 X21.337 Y-5.317 I-1.016 J2.373 E.04126 G1 X21.337 Y-6.487 E.03879 G1 X20.878 Y-6.487 E.01522 G1 X20.063 Y-4.456 F30000 G1 F16200 G3 X20.562 Y-2.94 I-1.912 J1.468 E.05395 G2 X21.337 Y-2.22 I6.931 J-6.689 E.0351 G1 X21.337 Y-.076 E.07112 G2 X20.353 Y-.817 I-2 J1.632 E.04126 G2 X19.043 Y-.525 I-.319 J1.654 E.04581 G3 X18.06 Y.4 I-6.982 J-6.435 E.0448 G1 X17.732 Y.538 E.01179 G3 X16.422 Y.245 I-.319 J-1.654 E.04581 G2 X15.439 Y-.68 I-6.982 J6.435 E.0448 G2 X14.713 Y-.815 I-.522 J.783 E.02518 G1 X14.713 Y-3.321 E.08313 G1 X15.112 Y-3.145 E.01444 G2 X15.921 Y-2.368 I5.86 J-5.296 E.03726 G2 X16.844 Y-1.067 I2.552 J-.831 E.05374 G1 X14.713 Y.292 F30000 G1 F16200 G1 X14.713 Y1.92 E.05401 G1 X15.112 Y2.096 E.01444 G2 X16.094 Y3.021 I6.982 J-6.435 E.0448 G2 X17.732 Y2.866 I.675 J-1.605 E.05684 G3 X18.715 Y1.941 I6.982 J6.435 E.0448 G3 X20.353 Y2.096 I.675 J1.605 E.05684 G2 X21.337 Y3.021 I8.243 J-7.78 E.04483 G1 X21.337 Y5.165 E.07112 G2 X20.68 Y4.562 I-4.564 J4.306 E.0296 G2 X19.043 Y4.717 I-.675 J1.605 E.05684 G3 X18.06 Y5.641 I-6.982 J-6.435 E.0448 G3 X16.422 Y5.486 I-.675 J-1.605 E.05684 G1 X15.767 Y4.841 E.0305 G2 X14.713 Y4.426 I-.908 J.759 E.03917 G1 X14.713 Y7.161 E.09073 G1 X15.112 Y7.337 E.01444 G2 X16.094 Y8.262 I6.982 J-6.435 E.0448 G2 X17.732 Y8.107 I.675 J-1.605 E.05684 G3 X18.715 Y7.182 I6.982 J6.435 E.0448 G3 X20.353 Y7.337 I.675 J1.605 E.05684 G2 X21.337 Y8.262 I8.243 J-7.78 E.04483 G1 X21.337 Y10.406 E.07112 G2 X20.68 Y9.803 I-4.564 J4.306 E.0296 G2 X19.043 Y9.958 I-.675 J1.605 E.05684 G3 X18.06 Y10.883 I-6.982 J-6.435 E.0448 G3 X16.422 Y10.728 I-.675 J-1.605 E.05684 G1 X15.767 Y10.083 E.0305 G2 X14.713 Y9.667 I-.908 J.759 E.03917 G1 X14.713 Y12.403 E.09073 G1 X15.112 Y12.578 E.01444 G2 X16.302 Y13.591 I2.907 J-2.213 E.05225 G2 X15.88 Y15.435 I1.915 J1.41 E.06455 G1 X15.767 Y15.324 E.00525 G2 X14.713 Y14.909 I-.908 J.759 E.03917 G1 X14.713 Y17.644 E.09073 G1 X15.112 Y17.82 E.01444 G2 X15.792 Y18.487 I5.023 J-4.445 E.03165 G1 X17.837 Y18.487 E.06781 G3 X18.715 Y17.665 I6.208 J5.753 E.03994 G3 X20.353 Y17.82 I.675 J1.605 E.05684 G2 X21.034 Y18.487 I5.023 J-4.445 E.03165 G1 X19.405 Y18.487 E.05401 G1 X20.02 Y13.495 F30000 G1 F16200 G3 X20.566 Y14.996 I-2.142 J1.628 E.05377 G3 X21.337 Y15.648 I-1.617 J2.696 E.03364 G1 X21.337 Y13.504 E.07112 G3 X20.353 Y12.578 I7.258 J-8.705 E.04483 G1 X19.698 Y12.29 E.02375 G2 X18.449 Y12.65 I-.311 J1.262 E.04514 G2 X16.899 Y13.03 I-.106 J2.922 E.0536 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.592 Y12.713 G1 X18.449 Y12.65 G1 X18.715 Y12.424 G1 X18.742 Y12.412 ;WIPE_END G1 X18.746 Y4.78 Z7.2 F30000 G1 X18.752 Y-10.052 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z7.2 F30000 G1 X30.752 Y-52.052 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:7 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;7 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.4 I-1.134 J.441 P1 F30000 G1 X49.929 Y-1.743 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00241 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.835 Y-1.725 E.01718 G1 X49.89 Y-1.736 E.00184 G1 X50 Y-1.314 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.503 Y-1.214 E.01575 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.92 Y-1.298 E.01325 G1 X49.961 Y-1.306 E.00127 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.379 Y-2.115 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00136 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.34 Y-2.12 I-.817 J-1.986 E.26273 G1 X50.422 Y-2.547 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00257 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.382 Y-2.551 E.01179 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.055 Y-1.557 ;WIPE_END G1 X45.197 Y-4.906 Z7.4 F30000 G1 X-51.352 Y-52.052 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.322 Y-44.277 Z7.4 F30000 G1 X-39.758 Y-23.469 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-47.948 E.812 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.309 E.37343 G1 X-50.248 Y-21.309 E.34797 G1 X-50.248 Y-23.469 E.07165 G1 X-39.798 Y-23.469 E.34665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.165 Y-23.876 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-48.355 E.812 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.902 E.37343 G1 X-50.655 Y-20.902 E.34797 G1 X-50.655 Y-23.876 E.09865 G1 X-40.205 Y-23.876 E.34665 G1 X-40.6 Y-24.311 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-48.79 E.75217 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.467 E.3459 G1 F10380 G1 X-41.213 Y-20.467 E.01884 G1 X-50.337 Y-20.467 E.28036 G1 X-51.09 Y-20.467 E.02314 G1 X-51.09 Y-21.22 E.02314 G1 F12000 G1 X-51.09 Y-23.559 E.07187 G1 F10380 G1 X-51.09 Y-24.311 E.02311 G1 X-50.337 Y-24.311 E.02314 G1 X-41.289 Y-24.311 E.27802 G1 X-40.64 Y-24.311 E.01994 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F10380 G1 X-40.636 Y-26.311 ;WIPE_END G1 X-41.671 Y-23.105 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-39.9 Y-23.105 E.04909 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.671 Y-21.674 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-39.9 Y-21.674 E.04909 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.221 Y-22.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.433468 G1 F12000 G1 X-42.701 Y-23.443 E.0216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.253 Y-23.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.675 Y-22.864 E.02604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.68 Y-22.317 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.806 Y-23.443 E.05066 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.358 Y-23.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.251 Y-21.336 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.803 Y-21.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.91 Y-23.443 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.463 Y-23.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.355 Y-21.336 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.908 Y-21.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.015 Y-23.443 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.567 Y-23.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.46 Y-21.336 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.012 Y-21.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.12 Y-23.443 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.672 Y-23.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.565 Y-21.336 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.117 Y-21.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.224 Y-23.443 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.776 Y-23.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.669 Y-21.336 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.222 Y-21.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.329 Y-23.443 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.881 Y-23.443 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.774 Y-21.336 E.09484 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.326 Y-21.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.222 Y-23.231 E.0853 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.222 Y-22.679 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.879 Y-21.336 E.06045 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.431 Y-21.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.222 Y-22.126 E.03559 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-49.431 Y-21.336 ;WIPE_END G1 X-45.588 Y-14.741 Z7.4 F30000 G1 X-37.677 Y-1.165 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.725 Y-1.139 E.00185 G3 X-40.111 Y-4.709 I-1.082 J-1.859 E.21535 G3 X-38.953 Y-5.144 I1.322 J1.759 E.04162 G3 X-37.492 Y-1.296 I.145 J2.146 E.18206 G1 X-37.644 Y-1.188 E.00616 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.903 Y-1.504 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.928 Y-1.49 E.00096 G3 X-39.673 Y-4.512 I-.879 J-1.507 E.18237 G3 X-38.926 Y-4.738 I.851 J1.467 E.02612 G3 X-37.739 Y-1.618 I.118 J1.741 E.14762 G1 X-37.87 Y-1.527 E.00528 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.129 E.13212 G3 X-38.898 Y-4.304 I.516 J1.31 E.01278 G3 X-38.113 Y-1.89 I.089 J1.306 E.10655 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.267 ;WIPE_END G1 X-40.155 Y5.36 Z7.4 F30000 G1 X-40.543 Y16.261 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.671 Y16.08 E.00734 G3 X-40.111 Y13.291 I1.863 J-1.077 E.10309 G3 X-38.953 Y12.856 I1.322 J1.759 E.04162 G3 X-40.514 Y16.315 I.146 J2.147 E.29448 G1 X-40.524 Y16.296 E.00072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.205 Y16.035 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00645 G3 X-39.673 Y13.488 I1.509 J-.874 E.09121 G3 X-38.926 Y13.262 I.851 J1.467 E.02612 G3 X-40.186 Y16.07 I.118 J1.74 E.23835 G1 X-39.844 Y15.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.017 Y15.504 E.01025 G3 X-39.301 Y13.789 I1.209 J-.502 E.06348 G3 X-38.898 Y13.696 I.516 J1.31 E.01278 G3 X-39.827 Y15.823 I.089 J1.306 E.16497 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.017 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.661 Y14.016 ;WIPE_END G1 X-38.02 Y6.562 Z7.4 F30000 G1 X-35.102 Y-6.698 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.571 Y-3.778 Z7.4 F30000 G1 Z7 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-36.592 Y-2.185 I-2.436 J.764 E.05372 G2 X-35.991 Y-1.909 I.566 J-.442 E.02279 G1 X-35.313 Y-2.057 E.02302 G1 X-35.313 Y-4.658 E.08629 G1 X-35.991 Y-5.083 E.02654 G1 X-36.646 Y-5.914 E.0351 G1 X-36.974 Y-6.17 E.0138 G2 X-38.612 Y-5.679 I-.314 J1.929 E.05871 G1 X-38.862 Y-5.362 E.01341 G2 X-40.496 Y-4.646 I.075 J2.394 E.06063 G1 X-41.232 Y-5.083 E.0284 G1 X-41.937 Y-5.952 E.03712 G1 X-41.937 Y-6.487 E.01773 G1 X-40.843 Y-6.487 E.03628 G1 X-39.787 Y-.855 F30000 G1 F16200 G3 X-40.925 Y-1.972 I1.198 J-2.358 E.05373 G3 X-41.937 Y-2.29 I-.293 J-.835 E.03773 G1 X-41.937 Y-.711 E.05238 G1 X-41.232 Y.158 E.03712 G2 X-39.595 Y.649 I1.324 J-1.438 E.05871 G1 X-39.267 Y.393 E.0138 G1 X-38.612 Y-.438 E.0351 G3 X-37.301 Y-.991 I1.789 J2.411 E.04763 G3 X-36.646 Y-.672 I.021 J.791 E.02511 G1 X-35.991 Y.158 E.0351 G1 X-35.313 Y.583 E.02654 G1 X-35.313 Y3.184 E.08629 G1 X-35.991 Y3.332 E.02302 G3 X-36.646 Y3.014 I-.021 J-.791 E.02511 G1 X-37.301 Y2.183 E.0351 G2 X-38.939 Y1.692 I-1.324 J1.438 E.05871 G1 X-39.267 Y1.948 E.0138 G1 X-39.922 Y2.779 E.0351 G3 X-41.56 Y3.27 I-1.324 J-1.438 E.05871 G3 X-41.937 Y2.951 I.468 J-.935 E.01654 G1 X-41.937 Y4.53 E.05238 G1 X-41.232 Y5.4 E.03712 G2 X-39.595 Y5.891 I1.324 J-1.438 E.05871 G1 X-39.267 Y5.634 E.0138 G1 X-38.612 Y4.803 E.0351 G3 X-36.974 Y4.312 I1.324 J1.438 E.05871 G1 X-36.646 Y4.569 E.0138 G1 X-35.991 Y5.4 E.0351 G1 X-35.313 Y5.824 E.02654 G1 X-35.313 Y8.426 E.08629 G1 X-35.991 Y8.573 E.02302 G3 X-36.646 Y8.255 I-.021 J-.791 E.02511 G1 X-37.301 Y7.424 E.0351 G2 X-38.939 Y6.933 I-1.324 J1.438 E.05871 G1 X-39.267 Y7.189 E.0138 G1 X-39.922 Y8.02 E.0351 G3 X-41.56 Y8.511 I-1.324 J-1.438 E.05871 G3 X-41.937 Y8.192 I.468 J-.935 E.01654 G1 X-41.937 Y9.772 E.05238 G1 X-41.232 Y10.641 E.03712 G2 X-39.595 Y11.132 I1.324 J-1.438 E.05871 G1 X-39.267 Y10.875 E.0138 G1 X-38.612 Y10.045 E.0351 G3 X-36.974 Y9.554 I1.324 J1.438 E.05871 G1 X-36.646 Y9.81 E.0138 G1 X-35.991 Y10.641 E.0351 G1 X-35.313 Y11.066 E.02654 G1 X-35.313 Y13.667 E.08629 G1 X-35.991 Y13.814 E.02302 G3 X-36.646 Y13.496 I-.021 J-.791 E.02511 G1 X-37.301 Y12.665 E.0351 G2 X-38.939 Y12.174 I-1.324 J1.438 E.05871 G2 X-39.52 Y12.751 I.897 J1.482 E.02741 G2 X-40.787 Y13.724 I.9 J2.484 E.05384 G3 X-41.937 Y13.434 I-.401 J-.834 E.04271 G1 X-41.937 Y15.013 E.05238 G1 X-41.232 Y15.882 E.03712 G1 X-40.888 Y16.103 E.01356 G3 X-41.112 Y14.524 I2.385 J-1.144 E.05373 G1 X-41.538 Y18.487 F30000 G1 F16200 G1 X-39.91 Y18.487 E.05401 G1 X-39.267 Y17.672 E.03442 G3 X-38.612 Y17.354 I.635 J.473 E.02511 G3 X-36.844 Y18.487 I-.28 J2.382 E.0721 G1 X-35.313 Y18.487 E.05078 G1 X-35.313 Y16.307 E.07231 G3 X-36.454 Y15.296 I.845 J-2.101 E.05157 G3 X-37.183 Y16.715 I-2.624 J-.453 E.05375 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.751 Y16.183 G1 X-36.516 Y15.617 G1 X-36.454 Y15.296 G1 X-36.221 Y15.59 ;WIPE_END G1 X-32.543 Y22.278 Z7.4 F30000 G1 X-15.232 Y53.745 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.798 J-.745 E.28724 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z7.4 F30000 G1 X-5.6 Y52.94 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.254 J1.929 E.27034 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.171 J.901 E.4285 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290578 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01244 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00942 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00942 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01244 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z7.4 F30000 G1 X-2.945 Y22.045 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.866 Y17.199 Z7.4 F30000 G1 X18.687 Y-.905 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.864 E.00697 G3 X16.889 Y-4.709 I-.289 J-2.133 E.18742 G3 X18.047 Y-5.144 I1.322 J1.759 E.04162 G3 X18.757 Y-.92 I.146 J2.147 E.21017 G1 X18.726 Y-.913 E.00105 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.608 Y-1.304 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.271 E.00608 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15954 G3 X18.074 Y-4.738 I.851 J1.467 E.02612 G3 X18.651 Y-1.316 I.118 J1.74 E.17022 G1 X18.646 Y-1.315 E.00017 G1 X18.524 Y-1.732 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.688 E.01003 G3 X17.699 Y-4.211 I-.008 J-1.309 E.11112 G3 X18.102 Y-4.304 I.516 J1.31 E.01278 G3 X18.562 Y-1.742 I.089 J1.306 E.1176 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.688 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.959 Y-2.587 ;WIPE_END G1 X17.375 Y5.034 Z7.4 F30000 G1 X18.036 Y17.144 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.00389 G3 X16.889 Y13.291 I.274 J-2.134 E.16867 G3 X18.047 Y12.856 I1.322 J1.759 E.04162 G3 X18.2 Y17.154 I.145 J2.147 E.22882 G1 X18.076 Y17.146 E.00414 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.062 Y16.737 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.003 G3 X17.327 Y13.488 I.22 J-1.73 E.14438 G3 X18.074 Y13.262 I.851 J1.467 E.02612 G3 X18.2 Y16.745 I.118 J1.74 E.18537 G1 X18.102 Y16.74 E.00325 G1 X18.094 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.301 E.00201 G3 X17.699 Y13.789 I.163 J-1.299 E.10584 G3 X18.102 Y13.696 I.516 J1.31 E.01278 G3 X18.371 Y16.299 I.089 J1.306 E.12361 G1 X18.134 Y16.299 E.00729 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.301 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.966 Y15.432 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.89 Y14.989 ;WIPE_END G1 X16.055 Y7.402 Z7.4 F30000 G1 X14.502 Y-6.698 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-4.523 Z7.4 F30000 G1 Z7 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.151 E.05401 G3 X15.767 Y-5.914 I.36 J.86 E.03821 G1 X16.422 Y-5.083 E.0351 G1 X16.753 Y-4.871 E.01304 G3 X18.743 Y-5.299 I1.519 J2.22 E.06925 G3 X20.353 Y-6.232 I1.852 J1.34 E.06358 G3 X21.337 Y-5.497 I-.237 J1.343 E.04227 G1 X21.337 Y-3.868 E.05401 G1 X20.141 Y-4.345 F30000 G1 F16200 G3 X20.553 Y-2.805 I-2.227 J1.422 E.05373 G2 X21.337 Y-1.971 I2.571 J-1.632 E.03819 G1 X21.337 Y-.255 E.05691 G2 X20.353 Y-.991 I-1.221 J.608 E.04227 G2 X19.043 Y-.438 I.056 J1.963 E.04827 G1 X18.387 Y.393 E.0351 G3 X17.732 Y.711 I-.635 J-.473 E.02511 G3 X16.422 Y.158 I.056 J-1.963 E.04827 G1 X15.767 Y-.672 E.0351 G2 X14.713 Y-.91 I-.694 J.623 E.03821 G1 X14.713 Y-3.314 E.07974 G1 X15.112 Y-3.059 E.0157 G1 X15.767 Y-2.228 E.0351 G3 X16.323 Y-1.56 I-.994 J1.393 E.02916 G2 X17.189 Y-.866 I2.413 J-2.125 E.03698 G1 X14.713 Y.299 F30000 G1 F16200 G1 X14.713 Y1.927 E.05401 G1 X15.112 Y2.183 E.0157 G1 X15.767 Y3.014 E.0351 G1 X16.094 Y3.27 E.0138 G2 X17.732 Y2.779 I.314 J-1.929 E.05871 G1 X18.387 Y1.948 E.0351 G1 X18.715 Y1.692 E.0138 G3 X20.353 Y2.183 I.314 J1.929 E.05871 G1 X21.008 Y3.014 E.0351 G1 X21.337 Y3.27 E.01384 G1 X21.337 Y4.986 E.05691 G2 X20.68 Y4.312 I-1.714 J1.013 E.0315 G2 X19.043 Y4.803 I-.314 J1.929 E.05871 G1 X18.387 Y5.634 E.0351 G1 X18.06 Y5.891 E.0138 G3 X16.422 Y5.4 I-.314 J-1.929 E.05871 G1 X15.767 Y4.569 E.0351 G2 X14.713 Y4.331 I-.694 J.623 E.03821 G1 X14.713 Y7.169 E.09412 G1 X15.112 Y7.424 E.0157 G1 X15.767 Y8.255 E.0351 G1 X16.094 Y8.511 E.0138 G2 X17.732 Y8.02 I.314 J-1.929 E.05871 G1 X18.387 Y7.189 E.0351 G1 X18.715 Y6.933 E.0138 G3 X20.353 Y7.424 I.314 J1.929 E.05871 G1 X21.008 Y8.255 E.0351 G1 X21.337 Y8.512 E.01384 G1 X21.337 Y10.227 E.05691 G2 X20.68 Y9.554 I-1.714 J1.013 E.0315 G2 X19.043 Y10.045 I-.314 J1.929 E.05871 G1 X18.387 Y10.875 E.0351 G1 X18.06 Y11.132 E.0138 G3 X16.422 Y10.641 I-.314 J-1.929 E.05871 G1 X15.767 Y9.81 E.0351 G2 X14.713 Y9.572 I-.694 J.623 E.03821 G1 X14.713 Y12.41 E.09412 G1 X15.112 Y12.665 E.0157 G1 X15.767 Y13.496 E.0351 G1 X16.183 Y13.769 E.01652 G2 X15.844 Y15.149 I2.418 J1.326 E.04767 G2 X14.713 Y14.814 I-.772 J.53 E.04233 G1 X14.713 Y17.651 E.09412 G3 X15.569 Y18.487 I-.782 J1.657 E.04043 G1 X17.745 Y18.487 E.07217 G1 X18.387 Y17.672 E.03442 G3 X19.043 Y17.354 I.635 J.473 E.02511 G3 X20.81 Y18.487 I-.28 J2.382 E.0721 G1 X21.337 Y18.487 E.01746 G1 X21.337 Y17.385 E.03655 G1 X19.871 Y13.326 F30000 G1 F16200 G3 X20.551 Y14.77 I-1.846 J1.751 E.05388 G3 X21.337 Y15.468 I-.545 J1.406 E.03562 G1 X21.337 Y13.753 E.05691 G1 X21.008 Y13.496 E.01384 G1 X20.353 Y12.665 E.0351 G2 X19.043 Y12.112 I-1.367 J1.41 E.04827 G2 X18.226 Y12.636 I.165 J1.156 E.03319 G2 X16.718 Y13.16 I-.008 J2.41 E.05398 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.295 Y12.814 G1 X17.592 Y12.713 G1 X18.226 Y12.636 G1 X18.498 Y12.379 ;WIPE_END G1 X18.585 Y4.747 Z7.4 F30000 G1 X18.752 Y-10.052 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 M73 P64 R29 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z7.4 F30000 G1 X30.752 Y-52.052 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:7.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.6 I-1.134 J.441 P1 F30000 G1 X49.949 Y-1.748 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00172 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.848 Y-1.727 E.01762 G1 X49.91 Y-1.74 E.00208 G1 X50 Y-1.314 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.503 Y-1.214 E.01575 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.933 Y-1.301 E.01366 G1 X49.961 Y-1.306 E.00087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.377 Y-2.115 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00141 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X50.338 Y-2.12 I-.817 J-1.986 E.26267 G1 X50.42 Y-2.548 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00262 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.38 Y-2.552 E.01174 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.054 Y-1.559 ;WIPE_END G1 X45.196 Y-4.908 Z7.6 F30000 G1 X-51.352 Y-52.052 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.969 Y-44.014 Z7.6 F30000 G1 X-42.748 Y-23.554 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.554 E.09918 G1 X-39.748 Y-47.948 E.80918 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.224 E.37061 G1 X-42.748 Y-21.224 E.09918 G1 X-42.748 Y-23.514 E.07595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-23.629 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-50.655 Y-23.629 E.24879 G1 X-50.655 Y-23.961 E.01101 G1 X-40.165 Y-23.961 E.34797 G1 X-40.155 Y-48.355 E.80918 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.817 E.37061 G1 X-50.655 Y-20.817 E.34797 G1 X-50.655 Y-21.149 E.01101 G1 X-43.155 Y-21.149 E.24879 G1 X-43.155 Y-23.589 E.08094 G1 X-43.59 Y-23.194 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.194 E.23045 G1 X-51.09 Y-24.396 E.03693 G1 X-40.6 Y-24.396 E.32233 G1 X-40.59 Y-48.79 E.74955 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.382 E.3433 G1 X-51.09 Y-20.382 E.32233 G1 X-51.09 Y-21.584 E.03693 G1 X-43.59 Y-21.584 E.23045 G1 X-43.59 Y-23.154 E.04824 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y-23.165 ;WIPE_END G1 X-39.913 Y-21.436 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.541 Y-21.436 E.05401 G3 X-41.888 Y-22.265 I3.252 J-1.844 E.02989 G2 X-42.537 Y-22.19 I-.231 J.845 E.02222 G1 X-42.537 Y-23.343 E.03827 G1 X-42.207 Y-23.343 E.01093 G1 X-41.888 Y-22.566 E.02789 G2 X-40.577 Y-22.932 I.139 J-2.028 E.04602 G2 X-40.074 Y-23.343 I-.7 J-1.369 E.02171 G1 X-39.563 Y-23.343 E.01696 G1 X-39.563 Y-22.226 E.03705 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.563 Y-23.343 G1 X-40.074 Y-23.343 G1 X-40.362 Y-23.108 ;WIPE_END G1 X-39.435 Y-15.532 Z7.6 F30000 G1 X-37.677 Y-1.165 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.725 Y-1.139 E.00182 G3 X-40.111 Y-4.709 I-1.082 J-1.859 E.21535 G3 X-38.949 Y-5.145 I1.321 J1.759 E.04175 G3 X-37.492 Y-1.296 I.141 J2.147 E.18192 G1 X-37.644 Y-1.188 E.00618 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.903 Y-1.503 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.928 Y-1.49 E.00094 G3 X-39.673 Y-4.512 I-.879 J-1.507 E.18237 G3 X-38.922 Y-4.738 I.851 J1.468 E.02625 G3 X-37.739 Y-1.618 I.114 J1.741 E.14748 G1 X-37.87 Y-1.526 E.0053 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.129 E.13212 G3 X-38.894 Y-4.304 I.515 J1.307 E.0129 G3 X-38.113 Y-1.89 I.085 J1.306 E.10643 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.267 ;WIPE_END G1 X-40.155 Y5.36 Z7.6 F30000 G1 X-40.544 Y16.26 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.671 Y16.08 E.00731 G3 X-40.111 Y13.291 I1.863 J-1.077 E.10309 G3 X-38.949 Y12.855 I1.322 J1.759 E.04175 G3 X-40.514 Y16.315 I.141 J2.148 E.29434 G1 X-40.524 Y16.295 E.00075 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.205 Y16.034 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.318 Y15.876 E.00642 G3 X-39.673 Y13.488 I1.51 J-.874 E.09122 G3 X-38.922 Y13.262 I.851 J1.468 E.02625 G3 X-40.187 Y16.07 I.114 J1.741 E.23835 G1 X-39.845 Y15.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.018 Y15.504 E.01022 G3 X-39.301 Y13.789 I1.209 J-.502 E.0635 G3 X-38.894 Y13.696 I.515 J1.307 E.0129 G3 X-39.829 Y15.823 I.085 J1.307 E.16497 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.018 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.657 Y14.02 ;WIPE_END G1 X-38.018 Y6.565 Z7.6 F30000 G1 X-35.102 Y-6.698 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.124 Y-3.415 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-40.861 Y-1.842 I2.653 J.365 E.05374 G3 X-41.888 Y-1.6 I-.866 J-1.379 E.03563 G1 X-41.937 Y-1.72 E.0043 G1 X-41.937 Y-1.304 E.01381 G1 X-41.888 Y-1.3 E.00164 G1 X-41.56 Y-.504 E.02857 G2 X-40.577 Y.654 I2.274 J-.935 E.0512 G2 X-39.267 Y1.02 I1.171 J-1.662 E.04602 G3 X-38.299 Y-.693 I4.174 J1.228 E.06584 G3 X-39.88 Y-.9 I-.462 J-2.602 E.05373 G1 X-41.937 Y-4.93 F30000 M73 P64 R28 G1 F16200 G1 X-41.937 Y-6.487 E.05164 G1 X-41.865 Y-6.487 E.00238 G2 X-40.905 Y-4.813 I4.07 J-1.222 E.06459 G2 X-40.556 Y-4.578 I.795 J-.805 E.01402 G3 X-38.746 Y-5.362 I1.836 J1.756 E.0672 G3 X-36.624 Y-6.487 I1.898 J1.017 E.08451 G2 X-35.664 Y-4.813 I4.07 J-1.222 E.06459 G2 X-35.313 Y-4.577 I.798 J-.809 E.01408 G1 X-35.313 Y-1.982 E.08608 G3 X-36.646 Y-1.6 I-1.225 J-1.758 E.04685 G1 X-36.743 Y-1.834 E.0084 G3 X-37.216 Y-1.25 I-4.691 J-3.31 E.02497 G3 X-36.646 Y-1.3 I.347 J.682 E.01943 G2 X-35.664 Y.429 I4.169 J-1.226 E.06655 G2 X-35.313 Y.664 I.798 J-.809 E.01408 G1 X-35.313 Y3.259 E.08608 G3 X-36.646 Y3.641 I-1.225 J-1.758 E.04685 G2 X-37.629 Y1.912 I-4.169 J1.226 E.06655 G2 X-38.939 Y1.295 I-2.662 J3.953 E.04823 G1 X-39.267 Y1.321 E.0109 G3 X-40.25 Y3.049 I-4.169 J-1.226 E.06655 G3 X-41.56 Y3.667 I-2.662 J-3.953 E.04823 G1 X-41.888 Y3.641 E.0109 G1 X-41.937 Y3.521 E.0043 G1 X-41.937 Y3.937 E.01381 G1 X-41.888 Y3.941 E.00164 G2 X-40.905 Y5.67 I4.169 J-1.226 E.06655 G2 X-39.595 Y6.287 I2.662 J-3.953 E.04823 G1 X-39.267 Y6.262 E.0109 G3 X-38.284 Y4.533 I4.169 J1.226 E.06655 G3 X-36.974 Y3.916 I2.662 J3.953 E.04823 G1 X-36.646 Y3.941 E.0109 G2 X-35.664 Y5.67 I4.169 J-1.226 E.06655 G2 X-35.313 Y5.905 I.798 J-.809 E.01408 G1 X-35.313 Y8.5 E.08608 G3 X-36.646 Y8.882 I-1.225 J-1.758 E.04685 G2 X-37.629 Y7.154 I-4.169 J1.226 E.06655 G2 X-38.939 Y6.536 I-2.662 J3.953 E.04823 G1 X-39.267 Y6.562 E.0109 G3 X-40.25 Y8.291 I-4.169 J-1.226 E.06655 G3 X-41.56 Y8.908 I-2.662 J-3.953 E.04823 G1 X-41.888 Y8.882 E.0109 G1 X-41.937 Y8.763 E.0043 G1 X-41.937 Y9.179 E.01381 G1 X-41.888 Y9.183 E.00164 G2 X-40.905 Y10.911 I4.169 J-1.226 E.06655 G2 X-39.595 Y11.528 I2.662 J-3.953 E.04823 G1 X-39.267 Y11.503 E.0109 G3 X-38.284 Y9.774 I4.169 J1.226 E.06655 G3 X-36.974 Y9.157 I2.662 J3.953 E.04823 G1 X-36.646 Y9.183 E.0109 G2 X-35.664 Y10.911 I4.169 J-1.226 E.06655 G2 X-35.313 Y11.147 I.798 J-.809 E.01408 G1 X-35.313 Y13.741 E.08608 G3 X-36.603 Y14.127 I-1.23 J-1.765 E.04543 G2 X-37.301 Y12.743 I-137.514 J68.484 E.05143 G2 X-38.939 Y11.778 I-2.515 J2.396 E.06387 G1 X-39.267 Y11.803 E.0109 G3 X-39.718 Y12.821 I-4.425 J-1.355 E.03701 G2 X-40.887 Y13.894 I1.16 J2.436 E.05341 G3 X-41.888 Y14.124 I-.838 J-1.356 E.03469 G1 X-41.937 Y14.004 E.0043 G1 X-41.937 Y14.42 E.01381 G1 X-41.888 Y14.424 E.00164 G2 X-40.905 Y16.153 I4.169 J-1.226 E.06655 G2 X-39.611 Y17.218 I2.295 J-1.47 E.0565 G1 X-41.608 Y18.487 F30000 G1 F16200 G1 X-39.98 Y18.487 E.05401 G2 X-39.369 Y17.294 I-4.408 J-3.008 E.04458 G2 X-38.225 Y17.293 I.569 J-3.098 E.03817 G3 X-37.02 Y18.487 I-.743 J1.956 E.05796 G1 X-35.313 Y18.487 E.05661 G1 X-35.313 Y16.388 E.06963 G3 X-36.439 Y14.928 I1.31 J-2.174 E.06258 G3 X-36.929 Y16.447 I-2.413 J.06 E.05396 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.751 Y16.183 G1 X-36.515 Y15.612 G1 X-36.439 Y14.928 G1 X-36.268 Y15.263 ;WIPE_END G1 X-32.607 Y21.96 Z7.6 F30000 G1 X-15.232 Y53.745 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z7.6 F30000 G1 X-5.6 Y52.94 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290587 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.539 Y52.954 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.470896 G1 F15000 G2 X-3.532 Y53.035 I-.025 J.043 E.00755 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.727 Y52.621 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.193 Y52.846 E.00801 G1 X-3.324 Y52.675 E.00662 G1 X-3.518 Y52.596 E.00643 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00947 G1 X-2.806 Y52.795 E.00942 G1 X-2.957 Y52.513 E.00984 G1 X-3.174 Y52.315 E.00902 G1 X-3.469 Y52.222 E.00951 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13111 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.225 E.01243 G1 X-2.481 Y51.896 E.01279 G1 X-2.794 Y51.656 E.01211 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.481 Y51.896 G1 X-2.226 Y52.225 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.314 Y44.89 Z7.6 F30000 G1 X-2.945 Y22.045 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.865 Y17.198 Z7.6 F30000 G1 X18.682 Y-.904 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.00678 G3 X16.889 Y-4.709 I-.289 J-2.132 E.18738 G3 X18.051 Y-5.145 I1.321 J1.759 E.04175 G3 X18.757 Y-.921 I.141 J2.147 E.20998 G1 X18.721 Y-.913 E.00124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.602 Y-1.303 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.271 E.00589 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15954 G3 X18.078 Y-4.738 I.851 J1.468 E.02625 G3 X18.651 Y-1.316 I.114 J1.74 E.17009 G1 X18.641 Y-1.313 E.00035 G1 X18.518 Y-1.731 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.688 E.00987 G3 X17.699 Y-4.211 I-.008 J-1.309 E.11112 G3 X18.106 Y-4.304 I.515 J1.307 E.0129 G3 X18.557 Y-1.741 I.085 J1.307 E.11763 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.688 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.958 Y-2.592 ;WIPE_END G1 X17.375 Y5.029 Z7.6 F30000 G1 X18.039 Y17.144 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.138 E.00399 G3 X16.889 Y13.291 I.274 J-2.135 E.16871 G3 X18.051 Y12.855 I1.321 J1.759 E.04175 G3 X18.2 Y17.155 I.141 J2.148 E.22874 G1 X18.079 Y17.147 E.00404 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.065 Y16.738 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.0031 G3 X17.327 Y13.488 I.22 J-1.73 E.14438 G3 X18.078 Y13.262 I.851 J1.468 E.02625 G3 X18.2 Y16.745 I.114 J1.74 E.18523 G1 X18.105 Y16.74 E.00315 G1 X18.097 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.301 E.00211 G3 X17.699 Y13.789 I.163 J-1.299 E.10584 G3 X18.106 Y13.696 I.515 J1.307 E.0129 G3 X18.371 Y16.299 I.085 J1.307 E.12349 G1 X18.137 Y16.299 E.00718 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.301 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.992 ;WIPE_END G1 X16.062 Y7.406 Z7.6 F30000 G1 X14.502 Y-6.698 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-4.66 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.288 E.05401 G3 X15.789 Y-6.487 I.781 J1.215 E.03722 G2 X16.721 Y-4.843 I4.08 J-1.227 E.06321 G3 X18.857 Y-5.27 I1.497 J1.933 E.07488 G3 X21.03 Y-6.487 I1.956 J.945 E.088 G2 X21.337 Y-5.742 I3.227 J-.893 E.02677 G1 X21.337 Y-1.575 E.13824 G3 X21.008 Y-1.6 I-.133 J-.421 E.01121 G3 X20.546 Y-2.691 I11.957 J-5.712 E.03932 G2 X20.226 Y-4.217 I-2.743 J-.222 E.05241 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.485 Y-3.612 G1 X20.566 Y-3 G1 X20.546 Y-2.691 G1 X20.708 Y-2.309 ;WIPE_END G1 X15.845 Y-3.167 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 G1 F16200 G2 X16.275 Y-1.632 I2.644 J.087 E.05373 G3 X15.767 Y-1.6 I-.293 J-.616 E.01731 G2 X14.784 Y-3.329 I-4.169 J1.226 E.06655 G1 X14.713 Y-3.378 E.00285 G1 X14.713 Y-1.047 E.07732 G3 X15.767 Y-1.3 I.895 J1.405 E.03661 G2 X16.749 Y.429 I4.169 J-1.226 E.06655 G2 X18.06 Y1.046 I2.662 J-3.953 E.04823 G1 X18.387 Y1.02 E.0109 G3 X19.37 Y-.708 I4.169 J1.226 E.06655 G3 X20.68 Y-1.326 I2.662 J3.953 E.04823 G1 X21.008 Y-1.3 E.0109 G2 X21.337 Y-.501 I3.463 J-.959 E.02872 G1 X21.337 Y3.666 E.13824 G3 X21.008 Y3.641 I-.133 J-.421 E.01121 G2 X20.025 Y1.912 I-4.169 J1.226 E.06655 G2 X18.715 Y1.295 I-2.662 J3.953 E.04823 G1 X18.387 Y1.321 E.0109 G3 X17.405 Y3.049 I-4.169 J-1.226 E.06655 G3 X16.094 Y3.667 I-2.662 J-3.953 E.04823 G1 X15.767 Y3.641 E.0109 G2 X14.784 Y1.912 I-4.169 J1.226 E.06655 G1 X14.713 Y1.864 E.00285 G1 X14.713 Y4.195 E.07732 G3 X15.767 Y3.941 I.895 J1.405 E.03661 G2 X16.749 Y5.67 I4.169 J-1.226 E.06655 G2 X18.06 Y6.287 I2.662 J-3.953 E.04823 G1 X18.387 Y6.262 E.0109 G3 X19.37 Y4.533 I4.169 J1.226 E.06655 G3 X20.68 Y3.916 I2.662 J3.953 E.04823 G1 X21.008 Y3.941 E.0109 G2 X21.337 Y4.74 I3.463 J-.959 E.02872 G1 X21.337 Y8.907 E.13824 G3 X21.008 Y8.882 I-.133 J-.421 E.01121 G2 X20.025 Y7.154 I-4.169 J1.226 E.06655 G2 X18.715 Y6.536 I-2.662 J3.953 E.04823 G1 X18.387 Y6.562 E.0109 G3 X17.405 Y8.291 I-4.169 J-1.226 E.06655 G3 X16.094 Y8.908 I-2.662 J-3.953 E.04823 G1 X15.767 Y8.882 E.0109 G2 X14.784 Y7.154 I-4.169 J1.226 E.06655 G1 X14.713 Y7.105 E.00285 G1 X14.713 Y9.436 E.07732 G3 X15.767 Y9.183 I.895 J1.405 E.03661 G2 X16.749 Y10.911 I4.169 J-1.226 E.06655 G2 X18.06 Y11.528 I2.662 J-3.953 E.04823 G1 X18.387 Y11.503 E.0109 G3 X19.37 Y9.774 I4.169 J1.226 E.06655 G3 X20.68 Y9.157 I2.662 J3.953 E.04823 G1 X21.008 Y9.183 E.0109 G2 X21.337 Y9.981 I3.463 J-.959 E.02872 G1 X21.337 Y11.61 E.05401 G1 X19.63 Y13.117 F30000 G1 F16200 G3 X20.499 Y14.456 I-1.476 J1.908 E.05396 G3 X21.008 Y14.424 I.294 J.617 E.01735 G2 X21.337 Y15.223 I3.463 J-.959 E.02872 G1 X21.337 Y14.149 E.03563 G3 X21.008 Y14.124 I-.133 J-.421 E.01121 G1 X20.68 Y13.327 E.02857 G2 X19.698 Y12.17 I-2.274 J.935 E.0512 G2 X18.387 Y11.803 I-1.171 J1.662 E.04602 G3 X18.034 Y12.645 I-3.651 J-1.036 E.03035 G2 X16.574 Y13.286 I.289 J2.642 E.05375 G1 X14.713 Y10.718 F30000 G1 F16200 G1 X14.713 Y12.346 E.05401 G1 X14.784 Y12.395 E.00285 G3 X15.767 Y14.124 I-3.186 J2.955 E.06655 G1 X15.998 Y14.142 E.00771 G2 X15.862 Y14.655 I1.88 J.775 E.01767 G1 X15.767 Y14.424 E.00828 G2 X14.713 Y14.677 I-.159 J1.658 E.03661 G1 X14.713 Y17.588 E.09654 G3 X15.393 Y18.487 I-1.584 J1.905 E.03774 G1 X17.674 Y18.487 E.07567 G2 X18.257 Y17.362 I-4.291 J-2.934 E.04212 G2 X19.105 Y17.186 I-.094 J-2.583 E.02889 G3 X20.635 Y18.487 I-.503 J2.141 E.06917 G1 X21.337 Y18.487 E.02329 G1 X21.337 Y17.561 E.03072 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X21.337 Y18.487 G1 X20.635 Y18.487 G1 X20.453 Y18.163 ;WIPE_END G1 X19.994 Y10.544 Z7.6 F30000 G1 X18.752 Y-10.052 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z7.6 F30000 G1 X30.752 Y-52.052 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:7.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.8 I-1.134 J.441 P1 F30000 G1 X49.969 Y-1.751 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00106 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.861 Y-1.73 E.01806 G1 X49.929 Y-1.744 E.00231 G1 X50 Y-1.314 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.503 Y-1.214 E.01575 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01575 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.946 Y-1.303 E.01407 G1 X49.961 Y-1.306 E.00046 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.376 Y-2.115 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00146 G3 X50 Y-2.152 I-.419 J2.105 E.43341 G1 X50.336 Y-2.119 E.0112 G1 X50.419 Y-2.548 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00267 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.589 E.01559 G1 X50.379 Y-2.552 E.0117 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.053 Y-1.56 ;WIPE_END G1 X45.195 Y-4.909 Z7.8 F30000 G1 X-51.352 Y-52.052 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.963 Y-44.016 Z7.8 F30000 G1 X-42.748 Y-23.63 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.63 E.09918 G1 X-39.748 Y-47.948 E.80668 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.149 E.3681 G1 X-42.748 Y-21.149 E.09918 G1 X-42.748 Y-23.59 E.08097 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-23.864 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.037 E.00573 G1 X-40.165 Y-24.037 E.09918 G1 X-40.155 Y-48.355 E.80668 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.742 E.3681 G1 X-43.155 Y-20.742 E.09918 G1 X-43.155 Y-23.824 E.10225 G1 X-43.59 Y-23.429 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.429 E.23045 G1 X-51.09 Y-24.472 E.03204 G1 X-40.6 Y-24.472 E.32233 G1 X-40.59 Y-48.79 E.74723 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.307 E.34097 G1 X-51.09 Y-20.307 E.32233 G1 X-51.09 Y-21.35 E.03204 G1 X-43.59 Y-21.35 E.23045 G1 X-43.59 Y-23.389 E.06267 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-23.951 F30000 ;TYPE:Gap infill ;WIDTH:0.65064 G1 F12000 G1 X-50.872 Y-23.951 E.37141 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-23.951 ;WIPE_END G1 X-50.872 Y-20.828 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 G1 F12000 G1 X-43.373 Y-20.828 E.37141 G1 X-42.1 Y-21.36 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.36 E.01451 G1 X-42.537 Y-22.551 E.03951 G2 X-42.409 Y-23.419 I-.638 J-.537 E.03064 G1 X-40.056 Y-23.419 E.07804 G1 X-40.285 Y-23.071 E.01382 G1 X-41.133 Y-22.415 E.03556 G2 X-41.355 Y-21.36 I.621 J.681 E.03821 G1 X-39.727 Y-21.36 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.355 Y-21.36 G1 X-41.434 Y-21.723 ;WIPE_END G1 X-40.062 Y-14.215 Z7.8 F30000 G1 X-37.678 Y-1.164 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.724 Y-1.137 E.0018 G3 X-40.111 Y-4.709 I-1.083 J-1.86 E.21547 G3 X-38.945 Y-5.145 I1.321 J1.758 E.04189 G3 X-37.491 Y-1.294 I.137 J2.148 E.18187 G1 X-37.645 Y-1.187 E.00621 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.904 Y-1.503 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.492 E.00092 G3 X-39.673 Y-4.512 I-.879 J-1.506 E.18224 G3 X-38.918 Y-4.739 I.851 J1.468 E.02639 G3 X-37.741 Y-1.62 I.11 J1.74 E.14726 G1 X-37.871 Y-1.526 E.00532 G1 X-38.146 Y-1.868 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.662 J-1.13 E.13218 G3 X-38.89 Y-4.305 I.514 J1.305 E.01303 G3 X-38.112 Y-1.889 I.081 J1.307 E.10634 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.267 ;WIPE_END G1 X-40.155 Y5.36 Z7.8 F30000 G1 X-40.544 Y16.259 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.669 Y16.079 E.00728 G3 X-40.111 Y13.291 I1.861 J-1.078 E.10306 G3 X-38.945 Y12.855 I1.321 J1.758 E.04189 G3 X-40.512 Y16.314 I.137 J2.146 E.29393 G1 X-40.524 Y16.294 E.00077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.206 Y16.033 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.0064 G3 X-39.673 Y13.488 I1.509 J-.874 E.09122 G3 X-38.918 Y13.261 I.851 J1.468 E.02639 G3 X-40.188 Y16.069 I.11 J1.741 E.23823 G1 X-39.845 Y15.788 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.016 Y15.504 E.01018 G3 X-39.301 Y13.789 I1.208 J-.503 E.06347 G3 X-38.89 Y13.695 I.514 J1.305 E.01303 G3 X-39.827 Y15.822 I.081 J1.306 E.16466 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.016 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.656 Y14.019 ;WIPE_END G1 X-38.018 Y6.565 Z7.8 F30000 G1 X-35.102 Y-6.698 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.929 Y-5.504 Z7.8 F30000 G1 X-41.937 Y-5.504 Z7.8 G1 Z7.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-6.487 E.03262 G1 X-41.292 Y-6.487 E.0214 G2 X-41.442 Y-6.036 I.344 J.365 E.01641 G2 X-40.605 Y-4.522 I2.287 J-.275 E.05884 G3 X-38.679 Y-5.381 I1.984 J1.859 E.07186 G3 X-37.666 Y-6.487 I2.107 J.914 E.05069 G1 X-36.051 Y-6.487 E.05357 G2 X-36.201 Y-6.036 I.344 J.365 E.01641 G2 X-35.313 Y-4.482 I2.282 J-.273 E.06097 G1 X-35.313 Y-1.897 E.08576 G2 X-36.146 Y-1.123 I1.073 J1.989 E.03813 G1 X-36.201 Y-.795 E.01102 G2 X-35.313 Y.759 I2.282 J-.273 E.06097 G1 X-35.313 Y3.344 E.08576 G2 X-36.146 Y4.119 I1.073 J1.989 E.03813 G1 X-36.201 Y4.446 E.01102 G2 X-35.313 Y6 I2.282 J-.273 E.06097 G1 X-35.313 Y8.585 E.08576 G2 X-36.146 Y9.36 I1.073 J1.989 E.03813 G1 X-36.201 Y9.688 E.01102 G2 X-35.313 Y11.241 I2.282 J-.273 E.06097 G1 X-35.313 Y13.827 E.08576 G2 X-36.146 Y14.601 I1.073 J1.989 E.03813 G1 X-36.201 Y14.929 E.01102 G2 X-35.313 Y16.483 I2.282 J-.273 E.06097 G1 X-35.313 Y18.111 E.05401 G1 X-36.804 Y16.262 F30000 G1 F16200 G3 X-38.062 Y17.243 I-2.178 J-1.498 E.05373 G3 X-37.173 Y18.487 I-1.301 J1.869 E.05173 G1 X-40.04 Y18.487 E.0951 G1 X-39.855 Y18.205 E.01119 G1 X-39.713 Y17.55 E.02224 G2 X-39.983 Y17.049 I-.42 J-.097 E.02062 G3 X-41.3 Y15.584 I2.75 J-3.797 E.06583 G1 X-41.442 Y14.929 E.02224 G3 X-41.016 Y14.183 I1.069 J.116 E.02932 G3 X-39.837 Y12.879 I2.219 J.822 E.05975 G2 X-39.767 Y11.981 I-1.092 J-.536 E.03061 G1 X-40.021 Y11.653 E.01374 G1 X-40.87 Y10.998 E.03556 G3 X-41.387 Y9.36 I1.452 J-1.359 E.05892 G1 X-41.133 Y9.032 E.01374 G1 X-40.285 Y8.377 E.03556 G2 X-39.767 Y6.739 I-1.452 J-1.359 E.05892 G1 X-40.021 Y6.412 E.01374 G1 X-40.87 Y5.757 E.03556 G3 X-41.387 Y4.119 I1.452 J-1.359 E.05892 G1 X-41.133 Y3.791 E.01374 G1 X-40.285 Y3.136 E.03556 G2 X-39.767 Y1.498 I-1.452 J-1.359 E.05892 G1 X-40.021 Y1.171 E.01374 G1 X-40.87 Y.515 E.03556 G3 X-41.387 Y-1.123 I1.452 J-1.359 E.05892 G3 X-40.784 Y-1.72 I1.451 J.861 E.02847 G2 X-38.319 Y-.689 I2.019 J-1.364 E.09382 G2 X-38.766 Y.843 I1.436 J1.251 E.05462 G1 X-38.513 Y1.171 E.01374 G1 X-37.664 Y1.826 E.03556 G3 X-37.147 Y3.464 I-1.452 J1.359 E.05892 G1 X-37.401 Y3.791 E.01374 G1 X-38.249 Y4.446 E.03556 G2 X-38.766 Y6.084 I1.452 J1.359 E.05892 G1 X-38.513 Y6.412 E.01374 G1 X-37.664 Y7.067 E.03556 G3 X-37.147 Y8.705 I-1.452 J1.359 E.05892 G1 X-37.401 Y9.032 E.01374 G1 X-38.249 Y9.688 E.03556 G2 X-38.766 Y11.326 I1.452 J1.359 E.05892 G1 X-38.513 Y11.653 E.01374 G1 X-37.664 Y12.308 E.03556 G1 X-37.234 Y12.963 E.02599 G1 X-37.162 Y13.297 E.01131 G2 X-38.618 Y12.646 I-1.765 J1.995 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-37.895 Y12.814 G1 X-37.162 Y13.297 G1 X-37.234 Y12.963 G1 X-37.256 Y12.931 ;WIPE_END G1 X-33.631 Y19.648 Z7.8 F30000 G1 X-15.232 Y53.745 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z7.8 F30000 G1 X-5.6 Y52.94 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.255 J1.928 E.27019 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42897 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.4289 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48861 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290587 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z7.8 F30000 G1 X-3.671 Y51.454 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.343 E.01242 G1 X-3.972 Y54.499 E.01247 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13118 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.966 Y53.685 E.00901 G1 X-3.671 Y53.778 E.00951 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01058 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00652 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z7.8 F30000 G1 X-2.945 Y22.045 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.865 Y17.198 Z7.8 F30000 G1 X18.676 Y-.903 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.867 E.00659 G3 X16.889 Y-4.709 I-.289 J-2.131 E.18729 G3 X18.055 Y-5.145 I1.321 J1.758 E.04189 G3 X18.757 Y-.923 I.137 J2.146 E.20973 G1 X18.715 Y-.913 E.00142 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.597 Y-1.302 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.27 E.00571 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15959 G3 X18.082 Y-4.739 I.851 J1.468 E.02639 G3 X18.651 Y-1.315 I.11 J1.741 E.17001 G1 X18.636 Y-1.311 E.00054 G1 X18.513 Y-1.731 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.691 E.00971 G3 X17.699 Y-4.211 I-.009 J-1.308 E.11102 G3 X18.11 Y-4.305 I.514 J1.305 E.01303 G3 X18.552 Y-1.741 I.081 J1.306 E.11755 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.691 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.956 Y-2.597 ;WIPE_END G1 X17.374 Y5.024 Z7.8 F30000 G1 X18.04 Y17.144 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.00403 G3 X16.889 Y13.291 I.274 J-2.134 E.16867 G3 X18.055 Y12.855 I1.321 J1.758 E.04189 G3 X18.2 Y17.154 I.137 J2.147 E.22854 G1 X18.08 Y17.146 E.004 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.066 Y16.738 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00314 G3 X17.327 Y13.488 I.22 J-1.73 E.14438 G3 X18.082 Y13.261 I.851 J1.468 E.02639 G3 X18.2 Y16.745 I.11 J1.74 E.1851 G1 X18.106 Y16.74 E.00311 G1 X18.099 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00214 G3 X17.699 Y13.789 I.163 J-1.299 E.1058 G3 X18.11 Y13.695 I.514 J1.305 E.01303 G3 X18.371 Y16.298 I.081 J1.306 E.1233 G1 X18.139 Y16.299 E.00714 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.963 Y15.424 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.89 Y14.993 ;WIPE_END G1 X16.055 Y7.406 Z7.8 F30000 G1 X14.502 Y-6.698 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.844 Y-2.854 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X16.473 Y-1.389 I2.634 J-.264 E.05373 G1 X16.267 Y-1.123 E.01116 G2 X16.784 Y.515 I1.969 J.279 E.05892 G1 X17.633 Y1.171 E.03556 G1 X17.887 Y1.498 E.01374 G3 X17.37 Y3.136 I-1.969 J.279 E.05892 G1 X16.521 Y3.791 E.03556 G1 X16.267 Y4.119 E.01374 G2 X16.784 Y5.757 I1.969 J.279 E.05892 G1 X17.633 Y6.412 E.03556 G1 X17.887 Y6.739 E.01374 G3 X17.37 Y8.377 I-1.969 J.279 E.05892 G1 X16.521 Y9.032 E.03556 G1 X16.267 Y9.36 E.01374 G2 X16.784 Y10.998 I1.969 J.279 E.05892 G1 X17.633 Y11.653 E.03556 G3 X17.865 Y12.66 I-.597 J.668 E.03652 G3 X20.388 Y14.101 I.326 J2.358 E.10365 G1 X20.507 Y13.946 E.00648 G2 X19.99 Y12.308 I-1.969 J-.279 E.05892 G1 X19.142 Y11.653 E.03556 G1 X18.888 Y11.326 E.01374 G3 X19.405 Y9.688 I1.969 J-.279 E.05892 G1 X20.254 Y9.032 E.03556 G1 X20.507 Y8.705 E.01374 G2 X19.99 Y7.067 I-1.969 J-.279 E.05892 G1 X19.142 Y6.412 E.03556 G1 X18.888 Y6.084 E.01374 G3 X19.405 Y4.446 I1.969 J-.279 E.05892 G1 X20.254 Y3.791 E.03556 G1 X20.507 Y3.464 E.01374 G2 X19.99 Y1.826 I-1.969 J-.279 E.05892 G1 X19.142 Y1.171 E.03556 G1 X18.888 Y.843 E.01374 G3 X19.405 Y-.795 I1.969 J-.279 E.05892 G1 X20.254 Y-1.45 E.03556 G2 X20.493 Y-2.426 I-.584 J-.66 E.03545 G2 X20.333 Y-4.013 I-2.614 J-.538 E.05373 G1 X21.337 Y-6.207 F30000 G1 F16200 G1 X21.337 Y-6.487 E.0093 G1 X19.989 Y-6.487 E.04472 G2 X18.975 Y-5.381 I1.093 J2.02 E.05069 G1 X18.945 Y-5.24 E.00478 G2 X16.713 Y-4.836 I-.732 J2.319 E.07829 G3 X16.212 Y-6.036 I1.312 J-1.251 E.04413 G3 X16.363 Y-6.487 I.494 J-.086 E.01641 G1 X14.713 Y-6.487 E.05471 G1 X14.713 Y-3.443 E.10096 G3 X15.321 Y-2.105 I-1.348 J1.419 E.04997 G3 X14.713 Y-1.219 I-1.178 J-.156 E.03699 G1 X14.713 Y1.798 E.10008 G3 X15.321 Y3.136 I-1.348 J1.419 E.04997 G3 X14.713 Y4.022 I-1.178 J-.156 E.03699 G1 X14.713 Y7.039 E.10008 G3 X15.321 Y8.377 I-1.348 J1.419 E.04997 G3 X14.713 Y9.264 I-1.178 J-.156 E.03699 G1 X14.713 Y12.281 E.10008 G3 X15.321 Y13.619 I-1.348 J1.419 E.04997 G3 X14.713 Y14.505 I-1.178 J-.156 E.03699 G1 X14.713 Y17.522 E.10008 G1 X15.179 Y18.205 E.02741 G1 X15.24 Y18.487 E.00958 G1 X17.614 Y18.487 E.07876 G1 X17.799 Y18.205 E.01119 G1 X17.942 Y17.55 E.02224 G1 X17.908 Y17.347 E.00682 G2 X19.358 Y17.061 I.277 J-2.422 E.04981 G3 X20.42 Y18.205 I-1.124 J2.109 E.05274 G1 X20.481 Y18.487 E.00958 G1 X21.337 Y18.487 E.02838 G1 X21.337 Y17.714 E.02563 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X21.337 Y18.487 G1 X20.481 Y18.487 G1 X20.42 Y18.205 G1 X20.375 Y18.135 ;WIPE_END G1 X19.936 Y10.516 Z7.8 F30000 G1 X18.752 Y-10.052 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 M73 P65 R28 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z7.8 F30000 G1 X30.752 Y-52.052 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:7.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8 I-1.134 J.442 P1 F30000 G1 X49.989 Y-1.755 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.758 E.00038 G1 X50.673 Y-1.624 E.02275 G1 X51.243 Y-1.243 E.02275 G1 X51.624 Y-.673 E.02275 G1 X51.758 Y0 E.02275 G1 X51.624 Y.673 E.02275 G1 X51.243 Y1.243 E.02275 G1 X50.673 Y1.624 E.02275 G1 X50 Y1.758 E.02275 G1 X49.327 Y1.624 E.02275 G1 X48.757 Y1.243 E.02275 G1 X48.376 Y.673 E.02275 G1 X48.242 Y0 E.02275 G1 X48.376 Y-.673 E.02275 G1 X48.757 Y-1.243 E.02275 G1 X49.327 Y-1.624 E.02275 G1 X49.949 Y-1.748 E.02104 G1 X50 Y-1.314 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.503 Y-1.214 E.01576 G1 X50.929 Y-.929 E.01576 G1 X51.214 Y-.503 E.01576 G1 X51.314 Y0 E.01576 G1 X51.214 Y.503 E.01576 G1 X50.929 Y.929 E.01576 G1 X50.503 Y1.214 E.01576 G1 X50 Y1.314 E.01576 G1 X49.497 Y1.214 E.01576 G1 X49.071 Y.929 E.01576 G1 X48.786 Y.503 E.01576 G1 X48.686 Y0 E.01576 G1 X48.786 Y-.503 E.01576 G1 X49.071 Y-.929 E.01576 G1 X49.497 Y-1.214 E.01576 G1 X49.961 Y-1.306 E.01453 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.374 Y-2.115 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.42 Y-2.111 E.00151 G3 X50 Y-2.152 I-.419 J2.105 E.43341 G1 X50.335 Y-2.119 E.01116 G1 X50.417 Y-2.548 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.505 Y-2.539 E.00272 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.377 Y-2.552 E.01165 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.831 Y-1.831 G1 X52.052 Y-1.561 ;WIPE_END G1 X45.194 Y-4.91 Z8 F30000 G1 X-51.352 Y-52.052 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.959 Y-44.018 Z8 F30000 G1 X-42.748 Y-23.678 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.678 E.09918 G1 X-39.748 Y-47.948 E.80508 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.101 E.36651 G1 X-42.748 Y-21.101 E.09918 G1 X-42.748 Y-23.638 E.08415 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-23.998 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.085 E.00289 G1 X-40.165 Y-24.085 E.09918 G1 X-40.155 Y-48.355 E.80508 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.694 E.36651 G1 X-43.155 Y-20.694 E.09918 G1 X-43.155 Y-23.958 E.10827 G1 X-43.59 Y-23.563 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.563 E.23045 G1 X-51.09 Y-24.52 E.02941 G1 X-40.6 Y-24.52 E.32233 G1 X-40.59 Y-48.79 E.74575 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.259 E.3395 G1 X-51.09 Y-20.259 E.32233 G1 X-51.09 Y-21.216 E.02941 G1 X-43.59 Y-21.216 E.23045 G1 X-43.59 Y-23.523 E.07088 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-24.041 F30000 ;TYPE:Gap infill ;WIDTH:0.565018 G1 F12000 G1 X-50.872 Y-24.041 E.31908 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-24.041 ;WIPE_END G1 X-50.872 Y-20.737 Z8 F30000 G1 Z7.6 G1 E.8 F1800 ;WIDTH:0.565022 G1 F12000 G1 X-43.373 Y-20.737 E.31908 G1 X-42.537 Y-21.376 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-23.005 E.05401 G2 X-42.517 Y-23.467 I-.529 J-.254 E.01577 G1 X-40.019 Y-23.467 E.08288 G1 X-40.199 Y-23.071 E.01444 G2 X-41.132 Y-22.088 I5.633 J6.283 E.045 G2 X-41.257 Y-21.312 I.842 J.534 E.0268 G1 X-39.629 Y-21.312 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.257 Y-21.312 G1 X-41.264 Y-21.684 ;WIPE_END G1 X-39.95 Y-14.165 Z8 F30000 G1 X-37.678 Y-1.164 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.725 Y-1.138 E.00178 G3 X-40.111 Y-4.709 I-1.083 J-1.86 E.21541 G3 X-38.941 Y-5.145 I1.321 J1.758 E.04202 G3 X-37.492 Y-1.295 I.133 J2.148 E.18169 G1 X-37.645 Y-1.187 E.00623 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.904 Y-1.503 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.492 E.0009 G3 X-39.673 Y-4.512 I-.879 J-1.506 E.18224 G3 X-38.914 Y-4.739 I.851 J1.468 E.02653 G3 X-37.741 Y-1.62 I.106 J1.741 E.14713 G1 X-37.872 Y-1.526 E.00535 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.129 E.13211 G3 X-38.886 Y-4.305 I.514 J1.304 E.01316 G3 X-38.113 Y-1.89 I.077 J1.307 E.10618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.727 Y-2.073 G1 X-39.879 Y-2.272 ;WIPE_END G1 X-40.153 Y5.356 Z8 F30000 G1 X-40.544 Y16.259 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.67 Y16.08 E.00725 G3 X-40.111 Y13.291 I1.863 J-1.077 E.10308 G3 X-38.941 Y12.855 I1.321 J1.758 E.04203 G3 X-40.513 Y16.315 I.133 J2.148 E.29398 G1 X-40.525 Y16.294 E.0008 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.206 Y16.033 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00637 G3 X-39.673 Y13.488 I1.509 J-.874 E.09121 G3 X-38.914 Y13.261 I.851 J1.468 E.02653 G3 X-40.188 Y16.068 I.106 J1.741 E.23803 G1 X-39.846 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.017 Y15.504 E.01016 G3 X-39.301 Y13.789 I1.209 J-.502 E.06348 G3 X-38.886 Y13.695 I.514 J1.304 E.01316 G3 X-39.829 Y15.821 I.077 J1.307 E.16466 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.017 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.656 Y14.019 ;WIPE_END G1 X-38.017 Y6.564 Z8 F30000 G1 X-35.102 Y-6.698 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.926 Y-5.768 Z8 F30000 G1 X-41.937 Y-5.768 Z8 G1 Z7.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-6.487 E.02384 G1 X-41.027 Y-6.487 E.03018 G2 X-41.253 Y-5.381 I.971 J.775 E.03886 G1 X-40.956 Y-4.726 E.02387 G1 X-40.674 Y-4.444 E.01324 G3 X-38.633 Y-5.381 I2.049 J1.771 E.07683 G3 X-37.885 Y-6.487 I1.848 J.444 E.04524 G1 X-35.786 Y-6.487 E.06964 G2 X-36.012 Y-5.381 I.971 J.775 E.03886 G2 X-35.313 Y-4.324 I1.759 J-.403 E.04295 G1 X-35.313 Y-1.749 E.08541 G2 X-36.024 Y-.795 I1.504 J1.862 E.03989 G2 X-35.313 Y.917 I1.983 J.181 E.06397 G1 X-35.313 Y3.492 E.08541 G2 X-36.024 Y4.446 I1.504 J1.862 E.03989 G2 X-35.313 Y6.159 I1.983 J.181 E.06397 G1 X-35.313 Y8.733 E.08541 G2 X-36.024 Y9.688 I1.504 J1.862 E.03989 G2 X-35.313 Y11.4 I1.983 J.181 E.06397 G1 X-35.313 Y13.975 E.08541 G2 X-36.024 Y14.929 I1.504 J1.862 E.03989 G2 X-35.313 Y16.641 I1.983 J.181 E.06397 G1 X-35.313 Y18.269 E.05401 G1 X-36.732 Y16.143 F30000 G1 F16200 G3 X-37.93 Y17.198 I-2.1 J-1.179 E.05395 G3 X-37.275 Y18.487 I-1.252 J1.446 E.04918 G1 X-40.029 Y18.487 E.09135 G1 X-39.901 Y18.205 E.01028 G1 X-39.889 Y17.55 E.02174 G2 X-40.301 Y16.894 I-1.202 J.299 E.02611 G1 X-40.956 Y16.239 E.03072 G3 X-41.132 Y14.601 I1.441 J-.983 E.05691 G3 X-39.9 Y12.91 I2.353 J.42 E.07182 G2 X-40.301 Y11.653 I-1.25 J-.294 E.04598 G1 X-40.956 Y10.998 E.03072 G3 X-41.132 Y9.36 I1.441 J-.983 E.05691 G3 X-40.199 Y8.377 I6.566 J5.3 E.045 G2 X-40.023 Y6.739 I-1.441 J-.983 E.05691 G2 X-40.956 Y5.757 I-6.566 J5.3 E.045 G3 X-41.132 Y4.119 I1.441 J-.983 E.05691 G3 X-40.199 Y3.136 I6.566 J5.3 E.045 G2 X-40.023 Y1.498 I-1.441 J-.983 E.05691 G2 X-40.956 Y.515 I-6.566 J5.3 E.045 G3 X-41.132 Y-1.123 I1.441 J-.983 E.05691 G3 X-40.704 Y-1.6 I3.176 J2.418 E.02129 G2 X-38.39 Y-.675 I1.945 J-1.509 E.08667 G2 X-38.233 Y1.171 I1.125 J.833 E.06711 G1 X-37.578 Y1.826 E.03072 G3 X-37.402 Y3.464 I-1.441 J.983 E.05691 G3 X-38.335 Y4.446 I-6.566 J-5.3 E.045 G2 X-38.511 Y6.084 I1.441 J.983 E.05691 G2 X-37.578 Y7.067 I6.566 J-5.3 E.045 G3 X-37.402 Y8.705 I-1.441 J.983 E.05691 G3 X-38.335 Y9.688 I-6.566 J-5.3 E.045 G2 X-38.511 Y11.326 I1.441 J.983 E.05691 G2 X-37.578 Y12.308 I6.566 J-5.3 E.045 G1 X-37.281 Y12.963 E.02387 G2 X-37.127 Y13.327 I.242 J.112 E.01474 G3 X-36.477 Y14.576 I-1.727 J1.692 E.04738 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.751 Y13.817 G1 X-37.127 Y13.327 G1 X-37.276 Y13.196 G1 X-37.281 Y12.963 G1 X-37.34 Y12.832 ;WIPE_END G1 X-33.712 Y19.547 Z8 F30000 G1 X-15.232 Y53.745 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.797 J-.745 E.28709 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z8 F30000 G1 X-5.6 Y52.94 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.256 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08449 G3 X-5.368 Y53.745 I-.254 J1.929 E.2703 G1 X-5.62 Y53 E.02609 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.174 J.901 E.42909 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42888 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.672 J.79 E.48876 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.4886 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.0992 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290602 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.0316 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01244 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.352 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z8 F30000 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.977 E.00774 G1 X-3.86 Y53.29 E.01058 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02365 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.948 J1.824 E.03159 G1 X-4.912 Y53.778 E.02566 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z8 F30000 G1 X-2.945 Y22.045 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.864 Y17.197 Z8 F30000 G1 X18.671 Y-.902 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.866 E.0064 G3 X16.889 Y-4.709 I-.289 J-2.132 E.18733 G3 X18.059 Y-5.145 I1.321 J1.758 E.04202 G3 X18.757 Y-.922 I.133 J2.147 E.20966 G1 X18.71 Y-.911 E.00161 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.591 Y-1.301 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.271 E.00552 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15954 G3 X18.086 Y-4.739 I.851 J1.468 E.02653 G3 X18.651 Y-1.316 I.106 J1.741 E.16982 G1 X18.63 Y-1.311 E.00073 G1 X18.506 Y-1.728 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.701 E.00424 G3 X17.699 Y-4.211 I-.179 J-1.297 E.11639 G3 X18.114 Y-4.305 I.514 J1.304 E.01316 G3 X18.545 Y-1.737 I.077 J1.307 E.11777 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.701 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.954 Y-2.604 ;WIPE_END G1 X17.372 Y5.017 Z8 F30000 G1 X18.039 Y17.144 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.131 E.00398 G3 X18.059 Y12.855 I.281 J-2.131 E.21003 G3 X18.891 Y17.036 I.146 J2.144 E.20564 G3 X18.2 Y17.15 I-.691 J-2.036 E.02334 G1 X18.079 Y17.145 E.00403 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.065 Y16.738 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.733 E.0031 G3 X17.327 Y13.488 I.22 J-1.73 E.14443 G3 X18.086 Y13.261 I.851 J1.468 E.02653 G3 X18.2 Y16.747 I.106 J1.741 E.18504 G1 X18.105 Y16.74 E.00315 G1 X18.097 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00211 G3 X17.699 Y13.789 I.163 J-1.299 E.10579 G3 X18.114 Y13.695 I.514 J1.304 E.01316 G3 X18.371 Y16.298 I.077 J1.307 E.12318 G1 X18.137 Y16.299 E.00717 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.891 Y14.991 ;WIPE_END G1 X16.055 Y7.405 Z8 F30000 G1 X14.502 Y-6.698 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 M73 P65 R27 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.864 Y-2.644 Z8 F30000 G1 Z7.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X16.624 Y-1.242 I2.613 J-.51 E.05373 G1 X16.523 Y-1.123 E.0052 G2 X16.698 Y.515 I1.617 J.655 E.05691 G3 X17.631 Y1.498 I-5.633 J6.283 E.045 G3 X17.456 Y3.136 I-1.617 J.655 E.05691 G2 X16.523 Y4.119 I5.633 J6.283 E.045 G2 X16.698 Y5.757 I1.617 J.655 E.05691 G3 X17.631 Y6.739 I-5.633 J6.283 E.045 G3 X17.456 Y8.377 I-1.617 J.655 E.05691 G2 X16.523 Y9.36 I5.633 J6.283 E.045 G2 X16.698 Y10.998 I1.617 J.655 E.05691 G1 X17.353 Y11.653 E.03072 G3 X17.758 Y12.681 I-.736 J.884 E.03823 G3 X18.046 Y12.644 I.283 J1.073 E.00964 G3 X20.279 Y13.879 I.105 J2.448 E.08905 G2 X20.076 Y12.308 I-1.655 J-.585 E.05451 G3 X19.143 Y11.326 I5.633 J-6.283 E.045 G3 X19.319 Y9.688 I1.617 J-.655 E.05691 G2 X20.252 Y8.705 I-5.633 J-6.283 E.045 G2 X20.076 Y7.067 I-1.617 J-.655 E.05691 G3 X19.143 Y6.084 I5.633 J-6.283 E.045 G3 X19.319 Y4.446 I1.617 J-.655 E.05691 G2 X20.252 Y3.464 I-5.633 J-6.283 E.045 G2 X20.076 Y1.826 I-1.617 J-.655 E.05691 G3 X19.143 Y.843 I5.633 J-6.283 E.045 G3 X19.693 Y-1.17 I1.524 J-.665 E.07481 G2 X20.478 Y-3.634 I-1.508 J-1.837 E.09069 G1 X21.337 Y-6.426 F30000 G1 F16200 G1 X21.337 Y-6.487 E.00201 G1 X19.769 Y-6.487 E.052 G2 X19.022 Y-5.381 I1.1 J1.549 E.04524 G1 X19.019 Y-5.215 E.0055 G2 X16.667 Y-4.795 I-.806 J2.284 E.08287 G3 X16.627 Y-6.487 I1.145 J-.873 E.05999 G1 X14.713 Y-6.487 E.06349 G1 X14.713 Y-3.538 E.09783 G1 X14.835 Y-3.416 E.00572 G1 X15.132 Y-2.76 E.02387 G3 X14.713 Y-1.431 I-1.46 J.27 E.04814 G1 X14.713 Y1.704 E.10398 G1 X14.835 Y1.826 E.00572 G1 X15.132 Y2.481 E.02387 G3 X14.713 Y3.81 I-1.46 J.27 E.04814 G1 X14.713 Y6.945 E.10398 G1 X14.835 Y7.067 E.00572 G1 X15.132 Y7.722 E.02387 G3 X14.713 Y9.052 I-1.46 J.27 E.04814 G1 X14.713 Y12.186 E.10398 G1 X14.835 Y12.308 E.00572 G1 X15.132 Y12.963 E.02387 G3 X14.713 Y14.293 I-1.46 J.27 E.04814 G1 X14.713 Y17.428 E.10398 G1 X14.835 Y17.55 E.00572 G1 X15.132 Y18.205 E.02387 G1 X15.138 Y18.487 E.00936 G1 X17.625 Y18.487 E.08251 G1 X17.753 Y18.205 E.01028 G1 X17.765 Y17.55 E.02174 G1 X17.663 Y17.3 E.00893 G2 X19.499 Y16.971 I.513 J-2.422 E.06342 G3 X20.374 Y18.205 I-1.206 J1.783 E.05125 G1 X20.379 Y18.487 E.00936 G1 X21.337 Y18.487 E.03178 G1 X21.337 Y17.817 E.02223 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X21.337 Y18.487 G1 X20.379 Y18.487 G1 X20.374 Y18.205 G1 X20.337 Y18.123 ;WIPE_END G1 X19.908 Y10.503 Z8 F30000 G1 X18.752 Y-10.052 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z8 F30000 G1 X30.752 Y-52.052 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:7.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.2 I-1.134 J.442 P1 F30000 G1 X49.99 Y-1.742 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50 Y-1.743 E.00035 G1 X50.314 Y-1.712 E.01046 G1 X50.34 Y-1.709 E.00088 G3 X49.66 Y-1.709 I-.34 J1.705 E.33967 G1 X49.95 Y-1.738 E.00966 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.95 Y-2.147 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X50 Y-2.145 E.00167 G3 X50.354 Y-2.117 I.006 J2.147 E.01178 G1 X50.42 Y-2.111 E.00221 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.582 Y-2.103 I-.817 J-1.986 E.23743 G1 X49.91 Y-2.142 E.01097 G1 X49.907 Y-2.58 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00287 G1 X50.396 Y-2.55 E.01223 G1 X50.505 Y-2.539 E.00336 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.867 Y-2.576 E.0115 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.396 Y-2.55 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.704 Y-1.934 ;WIPE_END G17 G3 Z8.2 I-.924 J-.792 P1 F30000 G1 X48.916 Y1.32 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X50.794 Y1.32 E.05773 G1 X50.859 Y1.285 E.00224 G2 X51.217 Y.943 I-.683 J-1.071 E.01532 G1 X48.783 Y.943 E.07476 G3 X48.564 Y.566 I1.573 J-1.168 E.01344 G1 X51.436 Y.566 E.08825 G2 X51.527 Y.188 I-.902 J-.418 E.012 G1 X48.473 Y.188 E.09386 G3 X48.473 Y-.189 I.948 J-.189 E.01166 G1 X51.527 Y-.189 E.09386 G2 X51.436 Y-.566 I-.993 J.041 E.012 G1 X48.564 Y-.566 E.08825 G1 X48.572 Y-.592 E.00083 G3 X48.784 Y-.943 I.989 J.357 E.01268 G1 X51.216 Y-.943 E.07476 G2 X50.794 Y-1.32 I-1.282 J1.011 E.01748 G1 X48.916 Y-1.32 E.05772 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X50.794 Y-1.32 G1 X50.891 Y-1.246 ;WIPE_END G1 X44.056 Y-4.643 Z8.2 F30000 G1 X-51.352 Y-52.052 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 M106 S255 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.956 Y-44.019 Z8.2 F30000 G1 X-42.748 Y-23.714 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.714 E.09918 G1 X-39.748 Y-47.948 E.8039 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.065 E.36532 G1 X-42.748 Y-21.065 E.09918 G1 X-42.748 Y-23.674 E.08653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-24.075 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.121 E.00153 G1 X-40.165 Y-24.121 E.09918 G1 X-40.155 Y-48.355 E.8039 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.658 E.36532 G1 X-43.155 Y-20.658 E.09918 G1 X-43.155 Y-24.035 E.11201 G1 X-43.59 Y-23.64 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.64 E.23045 G1 X-51.09 Y-24.556 E.02815 G1 X-40.6 Y-24.556 E.32233 G1 X-40.59 Y-48.79 E.74465 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.223 E.3384 G1 X-51.09 Y-20.223 E.32233 G1 X-51.09 Y-21.139 E.02815 G1 X-43.59 Y-21.139 E.23045 G1 X-43.59 Y-23.6 E.07561 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-24.098 F30000 ;TYPE:Gap infill ;WIDTH:0.523984 G1 F12000 G1 X-50.872 Y-24.098 E.294 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-24.098 ;WIPE_END G1 X-50.872 Y-20.681 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 ;WIDTH:0.523986 G1 F12000 G1 X-43.373 Y-20.681 E.29401 G1 X-42.537 Y-21.573 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.276 E.00986 G1 X-41.206 Y-21.276 E.04415 G1 X-41.128 Y-21.76 E.01627 G3 X-40.099 Y-23.071 I13.687 J9.69 E.05529 G1 X-39.981 Y-23.503 E.01485 G1 X-41.61 Y-23.503 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.981 Y-23.503 G1 X-40.079 Y-23.144 ;WIPE_END G1 X-39.25 Y-15.557 Z8.2 F30000 G1 X-37.679 Y-1.164 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.725 Y-1.138 E.00175 G3 X-39.991 Y-4.79 I-1.075 J-1.862 E.2195 G3 X-38.936 Y-5.145 I1.191 J1.79 E.03734 G3 X-37.491 Y-1.295 I.136 J2.145 E.18189 G1 X-37.646 Y-1.187 E.00626 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.905 Y-1.502 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.929 Y-1.491 E.00087 G3 X-39.673 Y-4.512 I-.879 J-1.507 E.1823 G3 X-38.91 Y-4.739 I.852 J1.469 E.02666 G3 X-37.74 Y-1.619 I.102 J1.741 E.14704 G1 X-37.872 Y-1.525 E.00537 G1 X-38.148 Y-1.87 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.129 E.13205 G3 X-38.881 Y-4.305 I.514 J1.303 E.01328 G3 X-38.113 Y-1.891 I.073 J1.306 E.10602 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.727 Y-2.073 G1 X-39.879 Y-2.272 ;WIPE_END G1 X-40.153 Y5.356 Z8.2 F30000 G1 X-40.545 Y16.258 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.662 Y16.075 E.00721 G3 X-39.991 Y13.21 I1.862 J-1.075 E.10748 G3 X-38.936 Y12.855 I1.191 J1.79 E.03734 G3 X-40.505 Y16.309 I.136 J2.145 E.2939 G1 X-40.52 Y16.29 E.0008 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.206 Y16.032 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00635 G3 X-39.673 Y13.488 I1.51 J-.874 E.09122 G3 X-38.91 Y13.261 I.852 J1.469 E.02666 G3 X-40.189 Y16.068 I.102 J1.741 E.23802 G1 X-39.846 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.016 Y15.504 E.01014 G3 X-39.301 Y13.789 I1.208 J-.503 E.06347 G3 X-38.881 Y13.695 I.514 J1.303 E.01328 G3 X-39.828 Y15.821 I.073 J1.306 E.16445 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.016 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.656 Y14.017 ;WIPE_END G1 X-38.018 Y6.563 Z8.2 F30000 G1 X-35.102 Y-6.698 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.915 Y-6.002 Z8.2 F30000 G1 X-41.937 Y-6.004 Z8.2 G1 Z7.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-6.487 E.01603 G1 X-40.792 Y-6.487 E.03798 G1 X-41.128 Y-6.036 E.01864 G2 X-40.741 Y-4.344 I1.62 J.52 E.06041 G3 X-38.608 Y-5.353 I1.993 J1.455 E.08159 G1 X-38.613 Y-5.381 E.00094 G3 X-38.063 Y-6.487 I1.495 J.054 E.04222 G1 X-35.551 Y-6.487 E.08336 G1 X-35.886 Y-6.036 E.01864 G2 X-35.313 Y-4.118 I1.748 J.522 E.07028 G1 X-35.313 Y-1.553 E.08509 G2 X-35.886 Y-.795 I7.335 J6.142 E.03154 G2 X-35.313 Y1.123 I1.748 J.522 E.07028 G1 X-35.313 Y3.688 E.08509 G2 X-35.886 Y4.446 I7.335 J6.142 E.03154 G2 X-35.313 Y6.364 I1.748 J.522 E.07028 G1 X-35.313 Y8.929 E.08509 G2 X-35.886 Y9.688 I7.335 J6.142 E.03154 G2 X-35.313 Y11.606 I1.748 J.522 E.07028 G1 X-35.313 Y14.171 E.08509 G2 X-35.886 Y14.929 I7.335 J6.142 E.03154 G2 X-35.313 Y16.847 I1.748 J.522 E.07028 G1 X-35.313 Y18.475 E.05401 G1 X-36.675 Y16.028 F30000 G1 F16200 G3 X-37.812 Y17.145 I-2.336 J-1.24 E.05373 G1 X-37.478 Y17.55 E.0174 G1 X-37.3 Y18.205 E.02252 G1 X-37.346 Y18.487 E.00948 G1 X-39.997 Y18.487 E.08796 G1 X-39.921 Y18.205 E.0097 G1 X-40.027 Y17.55 E.02202 G2 X-41.056 Y16.239 I-13.687 J9.69 E.05529 G1 X-41.234 Y15.584 E.02252 G1 X-41.158 Y15.118 E.01568 G3 X-39.927 Y12.924 I2.366 J-.115 E.08796 G1 X-40.027 Y12.308 E.02068 G1 X-40.515 Y11.653 E.0271 G3 X-41.128 Y9.688 I1.17 J-1.443 E.07238 G1 X-40.639 Y9.032 E.0271 G2 X-40.027 Y7.067 I-1.17 J-1.443 E.07238 G1 X-40.515 Y6.412 E.0271 G3 X-41.128 Y4.446 I1.17 J-1.443 E.07238 G1 X-40.639 Y3.791 E.0271 G2 X-40.027 Y1.826 I-1.17 J-1.443 E.07238 G1 X-40.515 Y1.171 E.0271 G3 X-41.128 Y-.795 I1.17 J-1.443 E.07238 G3 X-40.611 Y-1.485 I7.193 J4.85 E.02859 G2 X-38.472 Y-.658 I1.821 J-1.532 E.07935 G2 X-38.507 Y.515 I1.279 J.625 E.04014 G1 X-38.019 Y1.171 E.0271 G3 X-37.406 Y3.136 I-1.17 J1.443 E.07238 G1 X-37.895 Y3.791 E.0271 G2 X-38.507 Y5.757 I1.17 J1.443 E.07238 G1 X-38.019 Y6.412 E.0271 G3 X-37.406 Y8.377 I-1.17 J1.443 E.07238 G1 X-37.895 Y9.032 E.0271 G2 X-38.507 Y10.998 I1.17 J1.443 E.07238 G2 X-37.478 Y12.308 I13.688 J-9.69 E.05529 G1 X-37.3 Y12.963 E.02252 G1 X-37.33 Y13.149 E.00623 G3 X-36.491 Y14.506 I-1.746 J2.018 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.751 Y13.817 G1 X-37.33 Y13.149 G1 X-37.3 Y12.963 G1 X-37.351 Y12.778 ;WIPE_END G1 X-33.725 Y19.494 Z8.2 F30000 G1 X-15.232 Y53.745 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.745 E.28706 G3 X-15.232 Y52.255 I-.273 J1.954 E.06749 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z8.2 F30000 G1 X-5.6 Y52.94 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.257 J1.927 E.26987 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.17 J.901 E.4284 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42893 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.668 J.79 E.48794 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10044 G3 X-18.354 Y55.451 I-2.667 J-.78 E.15237 G3 X-19.699 Y53.797 I1.344 J-2.467 E.06719 G3 X-19.481 Y51.676 I2.695 J-.794 E.06719 G3 X-14.359 Y52.21 I2.451 J1.324 E.2019 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290673 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.0316 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.15 J-1.352 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01691 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01691 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.15 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.0316 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z8.2 F30000 G1 X-2.945 Y22.045 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.864 Y17.197 Z8.2 F30000 G1 X18.665 Y-.901 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.00622 G3 X16.889 Y-4.709 I-.289 J-2.132 E.18738 G3 X18.064 Y-5.145 I1.321 J1.758 E.04216 G3 X18.757 Y-.921 I.129 J2.148 E.20958 G1 X18.704 Y-.909 E.0018 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.586 Y-1.3 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.271 E.00533 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15954 G3 X18.09 Y-4.739 I.852 J1.469 E.02666 G3 X18.651 Y-1.316 I.102 J1.741 E.16968 G1 X18.624 Y-1.31 E.00091 G1 X18.503 Y-1.729 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.69 E.00939 G3 X17.699 Y-4.211 I-.008 J-1.309 E.11106 G3 X18.119 Y-4.305 I.514 J1.303 E.01328 G3 X18.542 Y-1.737 I.073 J1.307 E.11768 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.69 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.956 Y-2.608 ;WIPE_END G1 X17.372 Y5.013 Z8.2 F30000 G1 X18.035 Y17.144 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.00387 G3 X16.889 Y13.291 I.274 J-2.134 E.16867 G3 X18.064 Y12.855 I1.321 J1.758 E.04216 G3 X18.2 Y17.154 I.129 J2.148 E.22828 G1 X18.075 Y17.146 E.00416 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.062 Y16.737 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00298 G3 X17.327 Y13.488 I.22 J-1.73 E.14438 G3 X18.09 Y13.261 I.852 J1.469 E.02666 G3 X18.2 Y16.745 I.102 J1.741 E.18483 G1 X18.102 Y16.74 E.00327 G1 X18.094 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00199 G3 X17.699 Y13.789 I.163 J-1.299 E.10579 G3 X18.119 Y13.695 I.514 J1.303 E.01328 G3 X18.371 Y16.298 I.073 J1.307 E.12306 G1 X18.134 Y16.299 E.00729 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.89 Y14.988 ;WIPE_END G1 X16.055 Y7.401 Z8.2 F30000 G1 X14.502 Y-6.698 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X21.219 Y-6.487 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X19.591 Y-6.487 E.05401 G2 X19.041 Y-5.381 I.946 J1.16 E.04222 G1 X19.071 Y-5.197 E.00617 G2 X16.596 Y-4.734 I-.856 J2.269 E.08782 G3 X16.527 Y-6.036 I1.404 J-.728 E.04461 G1 X16.862 Y-6.487 E.01864 G1 X14.713 Y-6.487 E.0713 G1 X14.713 Y-3.684 E.09296 G3 X15.007 Y-2.105 I-1.306 J1.06 E.05555 G1 X14.713 Y-1.711 E.0163 G1 X14.713 Y1.557 E.10841 G3 X15.007 Y3.136 I-1.306 J1.06 E.05555 G1 X14.713 Y3.53 E.0163 G1 X14.713 Y6.798 E.10841 G3 X15.007 Y8.377 I-1.306 J1.06 E.05555 G1 X14.713 Y8.771 E.0163 G1 X14.713 Y12.039 E.10841 G3 X15.007 Y13.619 I-1.306 J1.06 E.05555 G1 X14.713 Y14.013 E.0163 G1 X14.713 Y17.281 E.10841 G1 X14.935 Y17.55 E.01156 G1 X15.113 Y18.205 E.02252 G1 X15.067 Y18.487 E.00948 G1 X17.657 Y18.487 E.08591 G1 X17.733 Y18.205 E.0097 G1 X17.627 Y17.55 E.02202 G1 X17.377 Y17.214 E.01389 G2 X19.628 Y16.885 I.804 J-2.365 E.07836 G2 X20.176 Y17.55 I6.957 J-5.177 E.02859 G1 X20.354 Y18.205 E.02252 G1 X20.308 Y18.487 E.00948 G1 X21.337 Y18.487 E.03412 G1 X21.337 Y17.887 E.0199 M73 P66 R27 G1 X20.549 Y15.263 F30000 G1 F16200 G2 X20.179 Y13.712 I-2.658 J-.186 E.05373 G2 X20.176 Y12.308 I-1.619 J-.699 E.04788 G1 X19.636 Y11.653 E.02818 G3 X19.219 Y9.688 I1.141 J-1.269 E.07126 G1 X19.76 Y9.032 E.02818 G2 X20.176 Y7.067 I-1.141 J-1.269 E.07126 G1 X19.636 Y6.412 E.02818 G3 X19.219 Y4.446 I1.141 J-1.269 E.07126 G1 X19.76 Y3.791 E.02818 G2 X20.176 Y1.826 I-1.141 J-1.269 E.07126 G1 X19.636 Y1.171 E.02818 G3 X19.219 Y-.795 I1.141 J-1.269 E.07126 G1 X19.324 Y-.922 E.00546 G3 X16.767 Y-1.118 I-1.125 J-2.097 E.08982 G1 X16.527 Y-.795 E.01336 G2 X16.598 Y.515 I1.483 J.576 E.04487 G1 X17.139 Y1.171 E.02818 G3 X17.556 Y3.136 I-1.141 J1.269 E.07126 G1 X17.015 Y3.791 E.02818 G2 X16.598 Y5.757 I1.141 J1.269 E.07126 G1 X17.139 Y6.412 E.02818 G3 X17.556 Y8.377 I-1.141 J1.269 E.07126 G1 X17.015 Y9.032 E.02818 G2 X16.598 Y10.998 I1.141 J1.269 E.07126 G3 X17.627 Y12.308 I-12.658 J11 E.05529 G1 X17.69 Y12.694 E.01298 G2 X16.338 Y13.542 I.685 J2.593 E.05374 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.017 Y12.951 G1 X17.69 Y12.694 G1 X17.629 Y12.32 ;WIPE_END G1 X18.012 Y4.697 Z8.2 F30000 G1 X18.752 Y-10.052 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z8.2 F30000 G1 X30.752 Y-52.052 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.4 I-1.134 J.442 P1 F30000 G1 X50 Y-1.743 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.31 Y-1.712 E.01034 G1 X50.34 Y-1.709 E.00099 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.961 Y-2.148 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X50 Y-2.152 E.00128 G1 X50.35 Y-2.117 E.01167 G1 X50.42 Y-2.111 E.00232 G3 X49.58 Y-2.11 I-.419 J2.105 E.4194 G1 X49.922 Y-2.144 E.01138 G1 X49.919 Y-2.581 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00251 G1 X50.393 Y-2.55 E.01213 G1 X50.505 Y-2.539 E.00346 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.879 Y-2.577 E.01186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.393 Y-2.55 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.713 Y-1.927 ;WIPE_END G1 X48.816 Y-.632 Z8.4 F30000 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X48.677 Y-.263 E.01213 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.61 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01217 G1 X50.954 Y-.954 E.0121 G1 X50.639 Y-1.181 E.01193 G1 X50.237 Y-1.326 E.01313 G1 X49.737 Y-1.323 E.01536 G1 X49.366 Y-1.183 E.01216 G1 X49.046 Y-.954 E.01211 G1 X48.839 Y-.665 E.01092 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.368 Y-.459 E.009 G1 X50.095 Y-.582 E.00921 G1 X49.828 Y-.562 E.00822 G1 X49.582 Y-.418 E.00877 G1 X49.437 Y-.17 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.2 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.441136 G1 F15000 G1 X50.154 Y-.129 E.00504 G1 X50 Y-.202 E.00551 G1 X49.857 Y-.142 E.00501 G1 X49.798 Y0 E.005 G1 X49.858 Y.143 E.00501 G1 X50 Y.202 E.00501 G1 X50.142 Y.142 E.005 G1 X50.183 Y.056 E.00311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.166 Y-.954 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.811 Y-.951 E.0109 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.203 Y-.939 E.0111 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.718 Y.627 ;WIPE_END G1 X43.936 Y-2.873 Z8.4 F30000 G1 X-51.352 Y-52.052 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.955 Y-44.019 Z8.4 F30000 G1 X-42.748 Y-23.729 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.729 E.09918 G1 X-39.748 Y-47.948 E.80337 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.049 E.3648 G1 X-42.748 Y-21.049 E.09918 G1 X-42.748 Y-23.689 E.08758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-24.114 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.136 E.00073 G1 X-40.165 Y-24.136 E.09918 G1 X-40.155 Y-48.355 E.80337 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.642 E.3648 G1 X-43.155 Y-20.642 E.09918 G1 X-43.155 Y-24.074 E.11385 G1 X-43.59 Y-23.679 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.679 E.23045 G1 X-51.09 Y-24.571 E.02741 G1 X-40.6 Y-24.571 E.32233 G1 X-40.59 Y-48.79 E.74417 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.207 E.33791 G1 X-51.09 Y-20.207 E.32233 G1 X-51.09 Y-21.099 E.02741 G1 X-43.59 Y-21.099 E.23045 G1 X-43.59 Y-23.639 E.07805 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-24.125 F30000 ;TYPE:Gap infill ;WIDTH:0.499942 G1 F12000 G1 X-50.872 Y-24.125 E.27931 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-24.125 ;WIPE_END G1 X-50.872 Y-20.653 Z8.4 F30000 G1 Z8 G1 E.8 F1800 ;WIDTH:0.499944 G1 F12000 G1 X-43.373 Y-20.653 E.27931 G1 X-42.537 Y-21.537 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.26 E.00919 G1 X-41.186 Y-21.26 E.04483 G1 X-41.016 Y-21.76 E.01751 G2 X-39.978 Y-23.071 I-5.292 J-5.257 E.05556 G1 X-39.936 Y-23.518 E.01492 G1 X-41.564 Y-23.518 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.936 Y-23.518 G1 X-39.971 Y-23.148 ;WIPE_END G1 X-39.212 Y-15.554 Z8.4 F30000 G1 X-37.77 Y-1.111 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.977 Y-1.012 E.00761 G3 X-40.111 Y-4.709 I-.831 J-1.985 E.20607 G3 X-38.932 Y-5.146 I1.321 J1.758 E.0423 G3 X-37.725 Y-1.138 I.125 J2.148 E.19076 G1 X-37.735 Y-1.132 E.0004 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.95 Y-1.476 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00672 G3 X-39.673 Y-4.512 I-.675 J-1.608 E.17467 G3 X-38.906 Y-4.739 I.852 J1.47 E.0268 G3 X-37.917 Y-1.499 I.098 J1.741 E.15395 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.13 E.13211 G3 X-38.877 Y-4.305 I.514 J1.303 E.01341 G3 X-38.113 Y-1.89 I.069 J1.307 E.10594 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.879 Y-2.27 ;WIPE_END G1 X-40.153 Y5.357 Z8.4 F30000 G1 X-40.545 Y16.258 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.669 Y16.079 E.0072 G3 X-40.111 Y13.291 I1.861 J-1.078 E.10305 G3 X-38.932 Y12.854 I1.321 J1.758 E.0423 G3 X-40.512 Y16.314 I.125 J2.147 E.29353 G1 X-40.525 Y16.292 E.00084 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.207 Y16.031 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00632 G3 X-39.673 Y13.488 I1.51 J-.874 E.09122 G3 X-38.906 Y13.261 I.852 J1.47 E.0268 G3 X-40.189 Y16.067 I.098 J1.742 E.23791 G1 X-39.846 Y15.786 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.016 Y15.504 E.01013 G3 X-39.301 Y13.789 I1.208 J-.503 E.06346 G3 X-38.877 Y13.695 I.514 J1.303 E.01341 G3 X-39.828 Y15.821 I.069 J1.306 E.16434 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.016 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.655 Y14.018 ;WIPE_END G1 X-38.017 Y6.564 Z8.4 F30000 G1 X-35.102 Y-6.698 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-37.005 Y-6.487 Z8.4 F30000 G1 Z8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.377 Y-6.487 E.05401 G2 X-35.476 Y-4.071 I.961 J1.25 E.09142 G1 X-35.313 Y-3.886 E.00816 G1 X-35.313 Y-1.318 E.08521 G2 X-35.476 Y1.171 I.959 J1.312 E.09427 G1 X-35.313 Y1.355 E.00816 G1 X-35.313 Y3.924 E.08521 G2 X-35.476 Y6.412 I.959 J1.312 E.09427 G1 X-35.313 Y6.596 E.00816 G1 X-35.313 Y9.165 E.08521 G2 X-35.476 Y11.653 I.959 J1.312 E.09427 G1 X-35.313 Y11.838 E.00816 G1 X-35.313 Y14.406 E.08521 G2 X-35.476 Y16.894 I.959 J1.312 E.09427 G1 X-35.313 Y17.079 E.00816 G1 X-35.313 Y18.487 E.04671 G1 X-35.533 Y18.487 E.00731 G1 X-36.613 Y15.9 F30000 G1 F16200 G3 X-37.685 Y17.082 I-2.224 J-.94 E.05396 G1 X-37.358 Y17.55 E.01893 G1 X-37.296 Y18.205 E.02183 G1 X-37.391 Y18.487 E.00988 G1 X-39.943 Y18.487 E.08464 G1 X-39.916 Y18.205 E.0094 G1 X-40.139 Y17.55 E.02295 G3 X-41.176 Y16.239 I5.292 J-5.257 E.05556 G1 X-41.238 Y15.584 E.02183 G1 X-41.145 Y15.31 E.00959 G3 X-39.93 Y12.925 I2.362 J-.299 E.09432 G1 X-40.139 Y12.308 E.0216 G3 X-41.176 Y10.998 I5.292 J-5.257 E.05556 G3 X-41.016 Y9.688 I1.543 J-.476 E.04511 G2 X-39.978 Y8.377 I-5.292 J-5.257 E.05556 G2 X-40.139 Y7.067 I-1.543 J-.476 E.04511 G3 X-41.176 Y5.757 I5.292 J-5.257 E.05556 G3 X-41.016 Y4.446 I1.543 J-.476 E.04511 G2 X-39.978 Y3.136 I-5.292 J-5.257 E.05556 G2 X-40.139 Y1.826 I-1.543 J-.476 E.04511 G3 X-41.176 Y.515 I5.292 J-5.257 E.05556 G3 X-41.016 Y-.795 I1.543 J-.476 E.04511 G1 X-40.509 Y-1.369 E.02539 G2 X-38.569 Y-.649 I1.771 J-1.801 E.07071 G1 X-38.618 Y-.14 E.01698 G1 X-38.395 Y.515 E.02295 G3 X-37.358 Y1.826 I-5.292 J5.257 E.05556 G3 X-37.518 Y3.136 I-1.543 J.476 E.04511 G2 X-38.556 Y4.446 I5.292 J5.257 E.05556 G2 X-38.395 Y5.757 I1.543 J.476 E.04511 G3 X-37.358 Y7.067 I-5.292 J5.257 E.05556 G3 X-37.518 Y8.377 I-1.543 J.476 E.04511 G2 X-38.556 Y9.688 I5.292 J5.257 E.05556 G2 X-38.395 Y10.998 I1.543 J.476 E.04511 G3 X-37.358 Y12.308 I-5.292 J5.257 E.05556 G1 X-37.296 Y12.963 E.02183 G1 X-37.352 Y13.13 E.00583 G3 X-36.497 Y14.477 I-1.745 J2.052 E.05374 G1 X-41.139 Y-2.657 F30000 G1 F16200 G3 X-40.823 Y-4.222 I2.386 J-.332 E.05395 G1 X-41.176 Y-4.726 E.02043 G3 X-40.618 Y-6.487 I1.784 J-.403 E.06424 G1 X-38.24 Y-6.487 E.07888 G1 X-38.556 Y-6.036 E.01825 G1 X-38.607 Y-5.349 E.02286 G3 X-37.153 Y-4.696 I-.298 J2.607 E.05371 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-37.895 Y-5.186 G1 X-38.607 Y-5.349 G1 X-38.578 Y-5.729 ;WIPE_END G1 X-35.79 Y1.376 Z8.4 F30000 G1 X-15.232 Y53.745 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.797 J-.745 E.28709 G3 X-15.232 Y52.255 I-.273 J1.954 E.06749 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z8.4 F30000 G1 X-5.6 Y52.94 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-4.559 Y55.604 I2.67 J.79 E.40963 G3 X-6.241 Y53.79 I.96 J-2.578 E.07885 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290611 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.201 E.01241 G1 X-18.452 Y53.616 E.01324 G1 X-18.261 Y53.944 E.01166 G1 X-17.975 Y54.231 E.01246 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.0316 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-18.102 Y53.468 I.159 J1.177 E.06685 G1 X-17.86 Y53.812 E.01294 G2 X-16.207 Y53.819 I.83 J-.813 E.05649 G1 X-15.987 Y53.515 E.01154 G1 X-15.795 Y53.01 E.01662 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.789 Y52.802 E.00958 G1 X-17.814 Y53.098 E.00914 G1 X-17.706 Y53.4 E.00985 G1 X-17.511 Y53.627 E.0092 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00647 G1 X-17.424 Y52.899 E.00659 G1 X-17.414 Y53.13 E.0071 G1 X-17.28 Y53.326 E.00728 G1 X-17.084 Y53.407 E.00653 G1 X-16.873 Y53.379 E.00653 G1 X-16.704 Y53.25 E.00653 G1 X-16.596 Y53.022 E.00774 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z8.4 F30000 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01058 G1 X-3.676 Y53.397 E.00654 G1 X-3.464 Y53.397 E.00652 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.966 Y53.684 E.00899 G1 X-3.671 Y53.778 E.00952 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.15 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13116 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.347 Y54.343 E.01241 G1 X-3.971 Y54.499 E.01248 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z8.4 F30000 G1 X-2.945 Y22.045 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.863 Y17.196 Z8.4 F30000 G1 X18.659 Y-.9 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.00603 G3 X16.889 Y-4.709 I-.289 J-2.132 E.18737 G3 X18.068 Y-5.146 I1.321 J1.758 E.0423 G3 X18.757 Y-.921 I.125 J2.148 E.20945 G1 X18.698 Y-.908 E.00199 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.58 Y-1.299 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.271 E.00514 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15953 G3 X18.094 Y-4.739 I.852 J1.47 E.0268 G3 X18.651 Y-1.316 I.098 J1.741 E.16955 G1 X18.619 Y-1.308 E.0011 G1 X18.495 Y-1.725 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.702 E.00389 G3 X17.699 Y-4.211 I-.179 J-1.297 E.11633 G3 X18.123 Y-4.305 I.514 J1.303 E.01341 G3 X18.539 Y-1.736 I.069 J1.307 E.11768 G1 X18.534 Y-1.735 E.00015 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.702 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.95 Y-2.615 ;WIPE_END G1 X17.366 Y5.007 Z8.4 F30000 G1 X18.029 Y17.143 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.137 E.00366 G3 X16.889 Y13.291 I.274 J-2.134 E.16867 G3 X18.068 Y12.854 I1.321 J1.758 E.0423 G3 X18.2 Y17.154 I.125 J2.148 E.22814 G1 X18.069 Y17.146 E.00437 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.055 Y16.737 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00277 G3 X17.327 Y13.488 I.22 J-1.73 E.14437 G3 X18.094 Y13.261 I.852 J1.47 E.0268 G3 X18.2 Y16.745 I.098 J1.741 E.1847 G1 X18.095 Y16.739 E.00348 G1 X18.087 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00179 G3 X17.699 Y13.789 I.163 J-1.299 E.10578 G3 X18.123 Y13.695 I.514 J1.303 E.01341 G3 X18.371 Y16.298 I.069 J1.307 E.12295 G1 X18.127 Y16.299 E.00749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.892 Y14.981 ;WIPE_END G1 X16.056 Y7.395 Z8.4 F30000 G1 X14.502 Y-6.698 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-5.532 Z8.4 F30000 G1 Z8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-3.904 E.05401 G1 X15.055 Y-3.416 E.01979 G3 X14.895 Y-2.105 I-1.543 J.476 E.04511 G1 X14.713 Y-1.899 E.00912 G1 X14.713 Y1.337 E.10736 G1 X15.055 Y1.826 E.01979 G3 X14.895 Y3.136 I-1.543 J.476 E.04511 G1 X14.713 Y3.342 E.00912 G1 X14.713 Y6.578 E.10736 G1 X15.055 Y7.067 E.01979 G3 X14.895 Y8.377 I-1.543 J.476 E.04511 G1 X14.713 Y8.583 E.00912 G1 X14.713 Y11.82 E.10736 G1 X15.055 Y12.308 E.01979 G3 X14.895 Y13.619 I-1.543 J.476 E.04511 G1 X14.713 Y13.825 E.00912 G1 X14.713 Y17.061 E.10736 G1 X15.055 Y17.55 E.01979 G1 X15.117 Y18.205 E.02183 G1 X15.022 Y18.487 E.00988 G1 X16.65 Y18.487 E.05401 G1 X16.028 Y15.933 F30000 G1 F16200 G2 X17.117 Y17.098 I2.41 J-1.161 E.05374 G3 X17.711 Y18.487 I-1.171 J1.323 E.05178 G1 X20.263 Y18.487 E.08464 G1 X20.359 Y18.205 E.00988 G1 X20.297 Y17.55 E.02183 G2 X19.743 Y16.787 I-3.659 J2.075 E.03133 G2 X20.136 Y13.619 I-1.579 J-1.805 E.11589 G2 X20.297 Y12.308 I-1.382 J-.834 E.04511 G2 X19.259 Y10.998 I-6.33 J3.947 E.05556 G3 X19.099 Y9.688 I1.382 J-.834 E.04511 G3 X20.136 Y8.377 I6.33 J3.947 E.05556 G2 X20.297 Y7.067 I-1.382 J-.834 E.04511 G2 X19.259 Y5.757 I-6.33 J3.947 E.05556 G3 X19.099 Y4.446 I1.382 J-.834 E.04511 G3 X20.136 Y3.136 I6.33 J3.947 E.05556 G2 X20.297 Y1.826 I-1.382 J-.834 E.04511 G2 X19.259 Y.515 I-6.33 J3.947 E.05556 G3 X19.116 Y-.819 I1.336 J-.818 E.04602 G3 X16.866 Y-1.052 I-.909 J-2.2 E.07819 G1 X16.638 Y-.795 E.01139 G2 X16.478 Y.515 I1.382 J.834 E.04511 G2 X17.516 Y1.826 I6.33 J-3.947 E.05556 G3 X17.676 Y3.136 I-1.382 J.834 E.04511 G3 X16.638 Y4.446 I-6.33 J-3.947 E.05556 G2 X16.478 Y5.757 I1.382 J.834 E.04511 G2 X17.516 Y7.067 I6.33 J-3.947 E.05556 G3 X17.676 Y8.377 I-1.382 J.834 E.04511 G3 X16.638 Y9.688 I-6.33 J-3.947 E.05556 G2 X16.478 Y10.998 I1.382 J.834 E.04511 G2 X17.516 Y12.308 I6.33 J-3.947 E.05556 G1 X17.649 Y12.703 E.01381 G2 X16.321 Y13.582 I.705 J2.508 E.0537 G1 X15.848 Y-3.217 F30000 G1 F16200 G3 X16.52 Y-4.665 I2.972 J.499 E.0536 G1 X16.478 Y-4.726 E.00246 G3 X17.036 Y-6.487 I1.784 J-.403 E.06424 G1 X19.414 Y-6.487 E.07888 G1 X19.099 Y-6.036 E.01825 G1 X19.037 Y-5.381 E.02183 G1 X19.103 Y-5.187 E.00681 G3 X20.283 Y-4.113 I-.944 J2.224 E.05396 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X19.873 Y-4.673 G1 X19.383 Y-5.049 G1 X19.103 Y-5.187 G1 X19.037 Y-5.381 G1 X19.053 Y-5.551 ;WIPE_END G1 X18.752 Y-10.052 Z8.4 F30000 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z8.4 F30000 G1 X30.752 Y-52.052 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:8.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.6 I-1.134 J.442 P1 F30000 G1 X50 Y-1.739 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.307 Y-1.713 I.006 J1.74 E.01023 G1 X50.34 Y-1.709 E.0011 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.738 I-.661 J-1.609 E.20231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.973 Y-2.149 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X50 Y-2.145 E.00092 G3 X50.347 Y-2.118 I.006 J2.147 E.01155 G1 X50.42 Y-2.111 E.00243 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.582 Y-2.103 I-.817 J-1.986 E.23743 G1 X49.933 Y-2.144 E.01173 G1 X49.93 Y-2.582 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00216 G1 X50.39 Y-2.551 E.01203 G1 X50.505 Y-2.539 E.00357 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.89 Y-2.578 E.0122 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.39 Y-2.551 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.722 Y-1.92 ;WIPE_END G17 G3 Z8.6 I-1.124 J-.467 P1 F30000 G1 X50.39 Y1.285 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01218 G1 X50.954 Y-.954 E.01209 G1 X50.639 Y-1.18 E.01191 G1 X50.234 Y-1.326 E.01324 G1 X49.737 Y-1.323 E.01526 G1 X49.366 Y-1.183 E.01216 G1 X49.046 Y-.954 E.01211 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.61 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.35 Y1.291 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.519 Y.277 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.368 Y-.459 E.00902 G1 X50.092 Y-.582 E.00926 G1 X49.828 Y-.562 E.00815 G1 X49.582 Y-.418 E.00876 G1 X49.437 Y-.17 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.492 Y.307 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.2 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440975 G1 F15000 G1 X50.153 Y-.129 E.00505 G1 X50 Y-.202 E.0055 G1 X49.857 Y-.143 E.00501 G1 X49.798 Y0 E.005 G1 X49.857 Y.143 E.005 G1 X50 Y.202 E.00501 G1 X50.143 Y.143 E.005 G1 X50.183 Y.056 E.00311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.163 Y-.954 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.811 Y-.951 E.01082 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.2 Y-.939 E.01118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.72 Y.625 ;WIPE_END G1 X43.938 Y-2.875 Z8.6 F30000 G1 X-51.352 Y-52.052 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.955 Y-44.019 Z8.6 F30000 G1 X-42.748 Y-23.729 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.729 E.09918 G1 X-39.748 Y-47.948 E.80337 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.049 E.3648 G1 X-42.748 Y-21.049 E.09918 G1 X-42.748 Y-23.689 E.08758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-24.114 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.136 E.00073 G1 X-40.165 Y-24.136 E.09918 G1 X-40.155 Y-48.355 E.80337 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.642 E.3648 G1 X-43.155 Y-20.642 E.09918 G1 X-43.155 Y-24.074 E.11385 G1 X-43.59 Y-23.679 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.679 E.23045 G1 X-51.09 Y-24.571 E.02741 G1 X-40.6 Y-24.571 E.32233 G1 X-40.59 Y-48.79 E.74417 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 M73 P66 R26 G1 X-40.6 Y-20.207 E.33791 G1 X-51.09 Y-20.207 E.32233 G1 X-51.09 Y-21.099 E.02741 G1 X-43.59 Y-21.099 E.23045 G1 X-43.59 Y-23.639 E.07805 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-24.125 F30000 ;TYPE:Gap infill ;WIDTH:0.499942 G1 F12000 G1 X-50.872 Y-24.125 E.27931 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-24.125 ;WIPE_END G1 X-50.872 Y-20.653 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 ;WIDTH:0.499944 G1 F12000 G1 X-43.373 Y-20.653 E.27931 G1 X-42.537 Y-21.537 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.26 E.00919 G1 X-41.186 Y-21.26 E.04482 G1 X-40.922 Y-21.76 E.01875 G1 X-40.207 Y-22.415 E.03215 G2 X-39.868 Y-23.518 I-.703 J-.82 E.04038 G1 X-41.497 Y-23.518 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.868 Y-23.518 G1 X-39.835 Y-23.148 ;WIPE_END G1 X-39.123 Y-15.549 Z8.6 F30000 G1 X-37.77 Y-1.111 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.977 Y-1.014 E.00761 G3 X-39.231 Y-.894 I-.823 J-1.986 E.04241 G3 X-38.928 Y-5.146 I.426 J-2.106 E.20564 G3 X-37.725 Y-1.138 I.128 J2.146 E.19095 G1 X-37.735 Y-1.132 E.0004 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.95 Y-1.476 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00673 G3 X-39.152 Y-1.293 I-.667 J-1.61 E.03446 G3 X-38.902 Y-4.74 I.348 J-1.707 E.1667 G3 X-37.916 Y-1.498 I.102 J1.74 E.15423 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.13 E.1321 G3 X-38.873 Y-4.306 I.514 J1.304 E.01353 G3 X-38.113 Y-1.889 I.065 J1.307 E.10583 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.267 ;WIPE_END G1 X-40.156 Y5.36 Z8.6 F30000 G1 X-40.546 Y16.257 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.67 Y16.08 E.00719 G3 X-40.111 Y13.291 I1.863 J-1.077 E.10308 G3 X-38.928 Y12.854 I1.321 J1.758 E.04243 G3 X-40.513 Y16.314 I.121 J2.148 E.29358 G1 X-40.526 Y16.292 E.00086 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.207 Y16.031 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.316 Y15.875 E.0063 G3 X-39.673 Y13.488 I1.508 J-.874 E.09119 G3 X-38.902 Y13.26 I.852 J1.47 E.02694 G3 X-40.188 Y16.066 I.094 J1.741 E.2376 G1 X-39.846 Y15.786 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.017 Y15.504 E.01013 G3 X-39.301 Y13.789 I1.209 J-.502 E.06347 G3 X-38.873 Y13.694 I.514 J1.304 E.01353 G3 X-39.829 Y15.821 I.065 J1.307 E.16433 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.017 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.88 Y14.263 G1 X-39.727 Y14.073 G1 X-39.655 Y14.018 ;WIPE_END G1 X-38.016 Y6.564 Z8.6 F30000 G1 X-35.102 Y-6.698 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.828 Y-6.487 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-6.487 E.05024 G1 X-35.313 Y-6.373 E.00377 G2 X-35.978 Y-4.398 I.969 J1.425 E.07422 G2 X-35.313 Y-3.711 I2.843 J-2.082 E.03182 G1 X-35.313 Y-1.132 E.08554 G2 X-35.978 Y.843 I.969 J1.425 E.07422 G2 X-35.313 Y1.531 I2.843 J-2.082 E.03182 G1 X-35.313 Y4.109 E.08554 G2 X-35.978 Y6.084 I.969 J1.425 E.07422 G2 X-35.313 Y6.772 I2.843 J-2.082 E.03182 G1 X-35.313 Y9.351 E.08554 G2 X-35.978 Y11.326 I.969 J1.425 E.07422 G2 X-35.313 Y12.013 I2.843 J-2.082 E.03182 G1 X-35.313 Y14.592 E.08554 G2 X-35.978 Y16.567 I.969 J1.425 E.07422 G2 X-35.313 Y17.255 I2.843 J-2.082 E.03182 G1 X-35.313 Y18.487 E.04088 G1 X-35.709 Y18.487 E.01314 G1 X-39.067 Y17.348 F30000 G1 F16200 G2 X-37.515 Y16.981 I.19 J-2.66 E.05373 G3 X-37.207 Y17.55 I-.57 J.677 E.02197 G1 X-37.266 Y18.205 E.02182 G1 X-37.415 Y18.487 E.01058 G1 X-39.861 Y18.487 E.08115 G1 X-39.887 Y18.205 E.0094 G1 X-40.233 Y17.55 E.02457 G1 X-40.947 Y16.894 E.03215 G3 X-41.327 Y16.239 I.645 J-.811 E.02572 G1 X-41.268 Y15.584 E.02182 G1 X-41.139 Y15.341 E.00913 G3 X-39.912 Y12.916 I2.349 J-.334 E.09599 G1 X-40.233 Y12.308 E.0228 G3 X-41.219 Y11.326 I3.095 J-4.092 E.04633 G3 X-40.922 Y9.688 I1.706 J-.536 E.05743 G2 X-39.936 Y8.705 I-3.095 J-4.092 E.04633 G2 X-40.233 Y7.067 I-1.706 J-.536 E.05743 G3 X-41.219 Y6.084 I3.095 J-4.092 E.04633 G3 X-40.922 Y4.446 I1.706 J-.536 E.05743 G2 X-39.936 Y3.464 I-3.095 J-4.092 E.04633 G2 X-40.233 Y1.826 I-1.706 J-.536 E.05743 G1 X-40.947 Y1.171 E.03215 G3 X-41.327 Y.515 I.645 J-.811 E.02572 G3 X-40.406 Y-1.268 I2.18 J-.004 E.0692 G2 X-38.692 Y-.641 I1.643 J-1.836 E.062 G1 X-38.647 Y-.14 E.0167 G1 X-38.301 Y.515 E.02457 G3 X-37.315 Y1.498 I-3.095 J4.092 E.04633 G3 X-37.612 Y3.136 I-1.706 J.536 E.05743 G2 X-38.598 Y4.119 I3.095 J4.092 E.04633 G2 X-38.301 Y5.757 I1.706 J.536 E.05743 G3 X-37.315 Y6.739 I-3.095 J4.092 E.04633 G3 X-37.612 Y8.377 I-1.706 J.536 E.05743 G2 X-38.598 Y9.36 I3.095 J4.092 E.04633 G2 X-38.301 Y10.998 I1.706 J.536 E.05743 G1 X-37.587 Y11.653 E.03215 G3 X-37.207 Y12.308 I-.645 J.811 E.02572 G1 X-37.266 Y12.963 E.02182 G1 X-37.353 Y13.129 E.00619 G3 X-36.497 Y14.475 I-1.745 J2.055 E.05374 G1 X-41.099 Y-2.459 F30000 G1 F16200 G3 X-40.947 Y-4.071 I2.827 J-.546 E.05442 G3 X-41.327 Y-4.726 I.645 J-.811 E.02572 G3 X-40.43 Y-6.487 I2.162 J-.008 E.06807 G1 X-38.496 Y-6.487 E.06416 G2 X-38.706 Y-6.036 I.469 J.493 E.01688 G1 X-38.63 Y-5.35 E.02291 G3 X-37.171 Y-4.711 I-.262 J2.587 E.0537 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-37.895 Y-5.186 G1 X-38.63 Y-5.35 G1 X-38.672 Y-5.728 ;WIPE_END G1 X-35.874 Y1.373 Z8.6 F30000 G1 X-15.232 Y53.745 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.745 E.28701 G3 X-15.232 Y52.255 I-.273 J1.954 E.06749 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z8.6 F30000 G1 X-5.6 Y52.94 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.259 J1.929 E.17717 G3 X-5.368 Y53.745 I-.492 J-1.902 E.09274 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.671 J.79 E.48855 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290593 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z8.6 F30000 G1 X-3.671 Y51.454 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01244 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.6 E.0124 G1 X-2.226 Y52.224 E.01249 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00947 G1 X-2.793 Y52.898 E.00626 G1 X-2.885 Y52.604 E.00946 G1 X-3.093 Y52.378 E.00945 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.166 Y52.947 E.00489 G1 X-3.247 Y52.752 E.0065 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.166 Y52.947 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z8.6 F30000 G1 X-2.945 Y22.045 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.863 Y17.195 Z8.6 F30000 G1 X18.654 Y-.898 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.867 E.00583 G3 X16.889 Y-4.709 I-.289 J-2.131 E.18728 G3 X18.072 Y-5.146 I1.321 J1.758 E.04243 G3 X18.757 Y-.923 I.121 J2.147 E.2092 G1 X18.693 Y-.908 E.00218 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.574 Y-1.298 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.27 E.00495 G3 X17.327 Y-4.512 I-.236 J-1.728 E.15958 G3 X18.098 Y-4.74 I.852 J1.47 E.02694 G3 X18.651 Y-1.315 I.094 J1.742 E.16948 G1 X18.613 Y-1.307 E.00129 G1 X18.49 Y-1.724 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.703 E.00371 G3 X17.699 Y-4.211 I-.179 J-1.296 E.11626 G3 X18.127 Y-4.306 I.514 J1.304 E.01353 G3 X18.538 Y-1.737 I.065 J1.307 E.11752 G1 X18.528 Y-1.735 E.00032 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.703 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.951 Y-2.621 ;WIPE_END G1 X17.363 Y5 Z8.6 F30000 G1 X18.02 Y17.143 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.136 E.00335 G3 X17.016 Y13.206 I.282 J-2.133 E.17327 G3 X18.072 Y12.854 I1.184 J1.795 E.03734 G3 X18.2 Y17.154 I.129 J2.148 E.22857 G1 X18.059 Y17.145 E.00467 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.046 Y16.736 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00246 G3 X17.327 Y13.488 I.22 J-1.73 E.14437 G3 X18.098 Y13.26 I.852 J1.47 E.02694 G3 X18.2 Y16.745 I.094 J1.741 E.18457 G1 X18.086 Y16.739 E.00378 G1 X18.078 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.0015 G3 X17.699 Y13.789 I.163 J-1.299 E.10578 G3 X18.127 Y13.694 I.514 J1.304 E.01353 G3 X18.371 Y16.298 I.065 J1.307 E.12284 G1 X18.118 Y16.299 E.00778 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.891 Y14.972 ;WIPE_END G1 X16.055 Y7.385 Z8.6 F30000 G1 X14.502 Y-6.698 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 M73 P67 R26 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-5.803 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.175 E.05401 G3 X15.098 Y-3.743 I-1.382 J1.621 E.01923 G3 X14.801 Y-2.105 I-1.706 J.536 E.05743 G1 X14.713 Y-2.025 E.00395 G1 X14.713 Y1.067 E.10255 G3 X15.098 Y1.498 I-1.382 J1.621 E.01923 G3 X14.801 Y3.136 I-1.706 J.536 E.05743 G1 X14.713 Y3.217 E.00395 G1 X14.713 Y6.308 E.10255 G3 X15.098 Y6.739 I-1.382 J1.621 E.01923 G3 X14.801 Y8.377 I-1.706 J.536 E.05743 G1 X14.713 Y8.458 E.00395 G1 X14.713 Y11.549 E.10255 G3 X15.098 Y11.981 I-1.382 J1.621 E.01923 G3 X14.801 Y13.619 I-1.706 J.536 E.05743 G1 X14.713 Y13.699 E.00395 G1 X14.713 Y16.791 E.10255 G3 X15.206 Y17.55 I-1.031 J1.209 E.03044 G1 X15.147 Y18.205 E.02182 G1 X14.998 Y18.487 E.01058 G1 X16.626 Y18.487 E.05401 G1 X15.842 Y15.123 F30000 G1 F16200 G2 X16.707 Y16.894 I2.784 J-.262 E.06683 G1 X17.422 Y17.55 E.03215 G1 X17.767 Y18.205 E.02457 G1 X17.793 Y18.487 E.0094 G1 X20.239 Y18.487 E.08115 G1 X20.388 Y18.205 E.01058 G1 X20.447 Y17.55 E.02182 G2 X19.849 Y16.694 I-1.63 J.503 E.0352 G2 X20.075 Y13.557 I-1.665 J-1.696 E.114 G2 X20.339 Y11.981 I-1.399 J-1.045 E.05508 G2 X19.353 Y10.998 I-4.081 J3.109 E.04633 G3 X19.056 Y9.36 I1.409 J-1.102 E.05743 G3 X20.042 Y8.377 I4.081 J3.109 E.04633 G2 X20.339 Y6.739 I-1.409 J-1.102 E.05743 G2 X19.353 Y5.757 I-4.081 J3.109 E.04633 G3 X19.056 Y4.119 I1.409 J-1.102 E.05743 G3 X20.042 Y3.136 I4.081 J3.109 E.04633 G2 X20.339 Y1.498 I-1.409 J-1.102 E.05743 G2 X19.353 Y.515 I-4.081 J3.109 E.04633 G3 X18.951 Y-.762 I1.329 J-1.12 E.0456 G3 X16.951 Y-.995 I-.732 J-2.415 E.06871 G1 X16.732 Y-.795 E.00983 G2 X16.435 Y.843 I1.409 J1.102 E.05743 G2 X17.422 Y1.826 I4.081 J-3.109 E.04633 G3 X17.719 Y3.464 I-1.409 J1.102 E.05743 G3 X16.732 Y4.446 I-4.081 J-3.109 E.04633 G2 X16.435 Y6.084 I1.409 J1.102 E.05743 G2 X17.422 Y7.067 I4.081 J-3.109 E.04633 G3 X17.719 Y8.705 I-1.409 J1.102 E.05743 G3 X16.732 Y9.688 I-4.081 J-3.109 E.04633 G2 X16.435 Y11.326 I1.409 J1.102 E.05743 G2 X17.422 Y12.308 I4.081 J-3.109 E.04633 G1 X17.632 Y12.706 E.01492 G2 X16.303 Y13.59 I.595 J2.334 E.05395 G1 X15.836 Y-3.028 F30000 G1 F16200 G3 X16.395 Y-4.522 I2.673 J.148 E.05374 G1 X16.327 Y-4.726 E.00713 G3 X17.224 Y-6.487 I2.162 J-.008 E.06807 G1 X19.158 Y-6.487 E.06416 G2 X18.948 Y-6.036 I.469 J.493 E.01688 G1 X19.007 Y-5.381 E.02182 G2 X19.383 Y-5.049 I.417 J-.093 E.01778 G3 X20.281 Y-4.099 I-1.157 J1.994 E.04397 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X19.873 Y-4.673 G1 X19.383 Y-5.049 G1 X19.112 Y-5.182 G1 X19.007 Y-5.381 G1 X18.994 Y-5.532 ;WIPE_END G1 X18.752 Y-10.052 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z8.6 F30000 G1 X30.752 Y-52.052 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:8.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.8 I-1.134 J.442 P1 F30000 G1 X50 Y-1.739 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.304 Y-1.713 I.005 J1.74 E.01012 G1 X50.34 Y-1.709 E.00121 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.738 I-.662 J-1.609 E.20231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.983 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X50 Y-2.145 E.00059 G3 X50.344 Y-2.118 I.006 J2.147 E.01144 G1 X50.42 Y-2.111 E.00254 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.582 Y-2.102 I-.817 J-1.986 E.23743 G1 X49.943 Y-2.145 E.01207 G1 X49.94 Y-2.583 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00184 G1 X50.386 Y-2.551 E.01192 G1 X50.505 Y-2.539 E.00367 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.901 Y-2.579 E.01252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.386 Y-2.551 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.73 Y-1.913 ;WIPE_END G1 X48.816 Y-.632 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.611 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01218 G1 X50.954 Y-.954 E.01209 G1 X50.64 Y-1.18 E.01189 G1 X50.23 Y-1.326 E.01335 G1 X49.737 Y-1.323 E.01517 G1 X49.366 Y-1.183 E.01217 G1 X49.046 Y-.954 E.0121 G1 X48.839 Y-.665 E.01092 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.16 Y-.954 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.811 Y-.951 E.01074 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.197 Y-.94 E.01126 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.2 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440813 G1 F15000 G1 X50.153 Y-.13 E.00505 G1 X50 Y-.202 E.0055 G1 X49.857 Y-.143 E.00501 G1 X49.798 Y0 E.005 G1 X49.857 Y.143 E.005 G1 X50 Y.202 E.00501 G1 X50.143 Y.143 E.005 G1 X50.183 Y.055 E.00311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.367 Y-.46 E.00904 G1 X50.09 Y-.582 E.00931 G1 X49.828 Y-.562 E.00808 G1 X49.582 Y-.418 E.00876 G1 X49.437 Y-.17 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.17 G1 X49.582 Y-.418 G1 X49.828 Y-.562 G1 X50.09 Y-.582 G1 X50.144 Y-.558 ;WIPE_END G1 X43.337 Y-4.012 Z8.8 F30000 G1 X-51.352 Y-52.052 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.956 Y-44.019 Z8.8 F30000 G1 X-42.748 Y-23.714 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.714 E.09918 G1 X-39.748 Y-47.948 E.8039 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.065 E.36532 G1 X-42.748 Y-21.065 E.09918 G1 X-42.748 Y-23.674 E.08653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-24.075 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.121 E.00153 G1 X-40.165 Y-24.121 E.09918 G1 X-40.155 Y-48.355 E.8039 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.658 E.36532 G1 X-43.155 Y-20.658 E.09918 G1 X-43.155 Y-24.035 E.11201 G1 X-43.59 Y-23.64 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.64 E.23045 G1 X-51.09 Y-24.556 E.02815 G1 X-40.6 Y-24.556 E.32233 G1 X-40.59 Y-48.79 E.74465 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.223 E.3384 G1 X-51.09 Y-20.223 E.32233 G1 X-51.09 Y-21.139 E.02815 G1 X-43.59 Y-21.139 E.23045 G1 X-43.59 Y-23.6 E.07561 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-24.098 F30000 ;TYPE:Gap infill ;WIDTH:0.523984 G1 F12000 G1 X-50.872 Y-24.098 E.294 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-24.098 ;WIPE_END G1 X-50.872 Y-20.681 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 ;WIDTH:0.523986 G1 F12000 G1 X-43.373 Y-20.681 E.29401 G1 X-42.537 Y-21.566 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.276 E.00962 G1 X-41.198 Y-21.276 E.0444 G1 X-40.84 Y-21.76 E.01999 G1 X-39.867 Y-22.415 E.03891 G2 X-39.762 Y-23.503 I-.663 J-.613 E.03891 G1 X-41.39 Y-23.503 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.762 Y-23.503 G1 X-39.654 Y-23.147 ;WIPE_END G1 X-39.004 Y-15.542 Z8.8 F30000 G1 X-37.769 Y-1.111 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.976 Y-1.01 E.00763 G3 X-39.981 Y-4.797 I-.824 J-1.988 E.21082 G3 X-38.924 Y-5.146 I1.181 J1.798 E.03734 G3 X-37.723 Y-1.134 I.125 J2.148 E.19102 G1 X-37.733 Y-1.129 E.00039 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.949 Y-1.476 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.134 Y-1.391 E.00673 G3 X-39.673 Y-4.512 I-.674 J-1.608 E.1746 G3 X-38.898 Y-4.74 I.853 J1.471 E.02707 G3 X-37.917 Y-1.5 I.09 J1.741 E.15364 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.13 E.13209 G3 X-38.869 Y-4.306 I.514 J1.305 E.01366 G3 X-38.113 Y-1.889 I.061 J1.307 E.10572 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.727 Y-2.073 G1 X-39.879 Y-2.272 ;WIPE_END G1 X-40.153 Y5.356 Z8.8 F30000 G1 X-40.546 Y16.257 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.664 Y16.076 E.00715 G3 X-39.981 Y13.203 I1.865 J-1.074 E.10795 G3 X-38.924 Y12.854 I1.181 J1.798 E.03734 G3 X-40.508 Y16.311 I.125 J2.148 E.2939 G1 X-40.523 Y16.289 E.00086 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.207 Y16.03 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.316 Y15.875 E.00628 G3 X-39.673 Y13.488 I1.508 J-.874 E.09118 G3 X-38.898 Y13.26 I.853 J1.471 E.02707 G3 X-40.188 Y16.066 I.09 J1.741 E.23749 G1 X-39.846 Y15.786 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.017 Y15.504 E.01014 G3 X-39.301 Y13.789 I1.209 J-.502 E.06347 G3 X-38.869 Y13.694 I.514 J1.305 E.01366 G3 X-39.829 Y15.821 I.061 J1.307 E.16422 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.017 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.656 Y14.017 ;WIPE_END G1 X-38.017 Y6.563 Z8.8 F30000 G1 X-35.102 Y-6.698 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.683 Y-6.487 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-6.487 E.04544 G1 X-35.313 Y-6.228 E.00857 G1 X-35.598 Y-6.036 E.01141 G2 X-36.274 Y-4.398 I1.605 J1.62 E.06036 G1 X-36.046 Y-4.071 E.01323 G1 X-35.313 Y-3.577 E.02933 G1 X-35.313 Y-.987 E.08591 G1 X-35.598 Y-.795 E.01141 G2 X-36.274 Y.843 I1.605 J1.62 E.06036 G1 X-36.046 Y1.171 E.01323 G1 X-35.313 Y1.664 E.02933 G1 X-35.313 Y4.254 E.08591 G1 X-35.598 Y4.446 E.01141 G2 X-36.274 Y6.084 I1.605 J1.62 E.06036 G1 X-36.046 Y6.412 E.01323 G1 X-35.313 Y6.906 E.02933 G1 X-35.313 Y9.495 E.08591 G1 X-35.598 Y9.688 E.01141 G2 X-36.274 Y11.326 I1.605 J1.62 E.06036 G1 X-36.046 Y11.653 E.01323 G1 X-35.313 Y12.147 E.02933 G1 X-35.313 Y14.737 E.08591 G1 X-35.598 Y14.929 E.01141 G2 X-36.274 Y16.567 I1.605 J1.62 E.06036 G1 X-36.046 Y16.894 E.01323 G1 X-35.313 Y17.388 E.02933 G1 X-35.313 Y18.487 E.03644 G1 X-35.843 Y18.487 E.01757 G1 X-38.83 Y17.364 F30000 G1 F16200 G2 X-37.322 Y16.844 I.013 J-2.409 E.05395 G3 X-37.019 Y17.222 I-.334 J.578 E.01645 G3 X-37.418 Y18.487 I-2.044 J.051 E.04481 G1 X-39.744 Y18.487 E.07717 G1 X-39.829 Y18.205 E.00978 G1 X-40.315 Y17.55 E.02705 G1 X-41.288 Y16.894 E.03891 G1 X-41.515 Y16.567 E.01323 G3 X-41.325 Y15.584 I1.582 J-.204 E.03377 G1 X-41.14 Y15.335 E.0103 G3 X-39.877 Y12.899 I2.348 J-.327 E.09706 G1 X-40.315 Y12.308 E.02439 G1 X-41.288 Y11.653 E.03891 G1 X-41.515 Y11.326 E.01323 G3 X-40.84 Y9.688 I2.28 J-.018 E.06036 G1 X-39.867 Y9.032 E.03891 G1 X-39.64 Y8.705 E.01323 G2 X-40.315 Y7.067 I-2.28 J-.018 E.06036 G1 X-41.288 Y6.412 E.03891 G1 X-41.515 Y6.084 E.01323 G3 X-40.84 Y4.446 I2.28 J-.018 E.06036 G1 X-39.867 Y3.791 E.03891 G1 X-39.64 Y3.464 E.01323 G2 X-40.315 Y1.826 I-2.28 J-.018 E.06036 G1 X-41.288 Y1.171 E.03891 G1 X-41.515 Y.843 E.01323 G3 X-40.289 Y-1.166 I2.123 J-.083 E.08274 G2 X-38.855 Y-.638 I1.618 J-2.183 E.05138 G1 X-38.705 Y-.14 E.01726 G1 X-38.219 Y.515 E.02705 G1 X-37.246 Y1.171 E.03891 G1 X-37.019 Y1.498 E.01323 G3 X-37.694 Y3.136 I-2.28 J.018 E.06036 G1 X-38.667 Y3.791 E.03891 G1 X-38.894 Y4.119 E.01323 G2 X-38.219 Y5.757 I2.28 J.018 E.06036 G1 X-37.246 Y6.412 E.03891 G1 X-37.019 Y6.739 E.01323 G3 X-37.694 Y8.377 I-2.28 J.018 E.06036 G1 X-38.667 Y9.032 E.03891 G1 X-38.894 Y9.36 E.01323 G2 X-38.219 Y10.998 I2.28 J.018 E.06036 G1 X-37.246 Y11.653 E.03891 G1 X-37.019 Y11.981 E.01323 G3 X-37.209 Y12.963 I-1.582 J.204 E.03377 G1 X-37.34 Y13.14 E.00731 G3 X-36.494 Y14.493 I-1.745 J2.032 E.05374 G1 X-41.049 Y-2.28 F30000 G1 F16200 G3 X-40.996 Y-3.875 I2.577 J-.713 E.05374 G3 X-41.523 Y-4.726 I.358 J-.81 E.03531 G3 X-40.171 Y-6.487 I2.534 J.547 E.07612 G1 X-38.809 Y-6.487 E.04517 G2 X-38.903 Y-6.036 I.296 J.297 E.01616 G1 X-38.682 Y-5.351 E.02387 G3 X-37.21 Y-4.746 I-.193 J2.562 E.05369 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-37.895 Y-5.186 G1 X-38.682 Y-5.351 G1 X-38.799 Y-5.714 ;WIPE_END G1 X-35.987 Y1.381 Z8.8 F30000 G1 X-15.232 Y53.745 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.745 E.28699 G3 X-15.232 Y52.255 I-.273 J1.954 E.06749 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z8.8 F30000 G1 X-5.6 Y52.94 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-2.589 Y50.394 I2.674 J.795 E.14059 G3 X-4.551 Y55.606 I-.981 J2.606 E.26885 G3 X-6.241 Y53.79 I.952 J-2.58 E.0791 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-18.011 Y55.606 I-2.674 J-.795 E.14059 G3 X-14.359 Y52.21 I.982 J-2.607 E.34788 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290593 G1 X-14.79 Y53.151 E.00235 G1 X-16.629 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.253 Y51.657 E.0124 G1 X-16.592 Y51.517 E.01127 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.682 J.853 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.634 Y52.316 E.00899 G1 X-16.892 Y52.234 E.00832 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00652 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01058 G1 X-16.89 Y52.623 E.00531 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z8.8 F30000 G1 X-2.945 Y22.045 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.862 Y17.195 Z8.8 F30000 G1 X18.648 Y-.897 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.864 E.00565 G3 X17.019 Y-4.797 I-.28 J-2.134 E.19211 G3 X18.076 Y-5.146 I1.181 J1.798 E.03734 G3 X18.758 Y-.919 I.125 J2.148 E.20973 G1 X18.687 Y-.905 E.00237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.569 Y-1.297 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.272 E.00476 G3 X17.327 Y-4.512 I-.235 J-1.727 E.15947 G3 X18.102 Y-4.74 I.853 J1.471 E.02707 G3 X18.651 Y-1.317 I.09 J1.741 E.16924 G1 X18.608 Y-1.306 E.00148 G1 X18.487 Y-1.727 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.691 E.0089 G3 X17.699 Y-4.211 I-.008 J-1.308 E.11099 G3 X18.131 Y-4.306 I.514 J1.305 E.01366 G3 X18.538 Y-1.737 I.061 J1.307 E.1174 G1 X18.527 Y-1.735 E.00036 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.691 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.273 Y-2.073 G1 X17.065 Y-2.345 G1 X16.989 Y-2.499 G1 X16.954 Y-2.623 ;WIPE_END G1 X17.36 Y4.998 Z8.8 F30000 G1 X18.007 Y17.142 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.136 E.00294 G3 X17.019 Y13.203 I.282 J-2.133 E.1734 G3 X18.076 Y12.854 I1.181 J1.798 E.03734 G3 X18.2 Y17.154 I.125 J2.148 E.22844 G1 X18.047 Y17.144 E.00508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.034 Y16.736 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00206 G3 X17.327 Y13.488 I.22 J-1.73 E.14436 G3 X18.102 Y13.26 I.853 J1.471 E.02707 G3 X18.2 Y16.745 I.09 J1.741 E.18444 G1 X18.074 Y16.738 E.00419 G1 X18.065 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00111 G3 X17.699 Y13.789 I.163 J-1.299 E.10577 G3 X18.131 Y13.694 I.514 J1.305 E.01366 G3 X18.371 Y16.298 I.061 J1.307 E.12273 G1 X18.105 Y16.299 E.00817 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.895 Y14.959 ;WIPE_END G1 X16.057 Y7.373 Z8.8 F30000 G1 X14.502 Y-6.698 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.005 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.376 E.05401 G3 X15.394 Y-3.743 I-.472 J1.191 E.03156 G3 X14.719 Y-2.105 I-2.28 J.018 E.06036 G1 X14.713 Y.865 E.09853 G3 X15.394 Y1.498 I-.472 J1.191 E.03156 G3 X14.719 Y3.136 I-2.28 J.018 E.06036 G1 X14.713 Y6.106 E.09853 G3 X15.394 Y6.739 I-.472 J1.191 E.03156 G3 X14.719 Y8.377 I-2.28 J.018 E.06036 G1 X14.713 Y11.348 E.09853 G3 X15.394 Y11.981 I-.472 J1.191 E.03156 G3 X14.719 Y13.619 I-2.28 J.018 E.06036 G1 X14.713 Y16.589 E.09853 G3 X15.394 Y17.222 I-.472 J1.191 E.03156 G3 X14.995 Y18.487 I-2.044 J.051 E.04481 G1 X16.624 Y18.487 E.05401 G1 X15.871 Y14.607 F30000 G1 F16200 G2 X16.131 Y16.239 I3.675 J.252 E.05528 G2 X16.367 Y16.894 I.616 J.148 E.02445 G1 X17.339 Y17.55 E.03891 G1 X17.825 Y18.205 E.02705 G1 X17.91 Y18.487 E.00978 G1 X20.237 Y18.487 E.07717 G2 X20.635 Y17.222 I-1.645 J-1.214 E.04481 G2 X19.949 Y16.586 I-1.16 J.563 E.03177 G2 X20.037 Y13.515 I-1.819 J-1.589 E.11046 G2 X20.635 Y11.981 I-1.588 J-1.503 E.05599 G1 X20.408 Y11.653 E.01323 G1 X19.435 Y10.998 E.03891 G3 X18.76 Y9.36 I1.605 J-1.62 E.06036 G1 X18.987 Y9.032 E.01323 G1 X19.96 Y8.377 E.03891 G2 X20.635 Y6.739 I-1.605 J-1.62 E.06036 G1 X20.408 Y6.412 E.01323 G1 X19.435 Y5.757 E.03891 G3 X18.76 Y4.119 I1.605 J-1.62 E.06036 G1 X18.987 Y3.791 E.01323 G1 X19.96 Y3.136 E.03891 G2 X20.635 Y1.498 I-1.605 J-1.62 E.06036 G1 X20.408 Y1.171 E.01323 G1 X19.435 Y.515 E.03891 G1 X18.95 Y-.14 E.02705 G1 X18.778 Y-.708 E.01969 G3 X17.034 Y-.943 I-.552 J-2.496 E.05959 G1 X16.815 Y-.795 E.00878 G2 X16.139 Y.843 I1.605 J1.62 E.06036 G1 X16.367 Y1.171 E.01323 G1 X17.339 Y1.826 E.03891 G3 X18.015 Y3.464 I-1.605 J1.62 E.06036 G1 X17.787 Y3.791 E.01323 G1 X16.815 Y4.446 E.03891 G2 X16.139 Y6.084 I1.605 J1.62 E.06036 G1 X16.367 Y6.412 E.01323 G1 X17.339 Y7.067 E.03891 G3 X18.015 Y8.705 I-1.605 J1.62 E.06036 G1 X17.787 Y9.032 E.01323 G1 X16.815 Y9.688 E.03891 G2 X16.139 Y11.326 I1.605 J1.62 E.06036 G1 X16.367 Y11.653 E.01323 G1 X17.339 Y12.308 E.03891 G1 X17.634 Y12.706 E.0164 G2 X16.304 Y13.588 I.592 J2.335 E.05395 G1 X20.098 Y-1.591 F30000 G1 F16200 G2 X20.554 Y-3.119 I-2.156 J-1.476 E.05374 G2 X20.249 Y-4.183 I-.736 J-.365 E.04029 G2 X19.091 Y-5.191 I-2.341 J1.521 E.05159 G1 X18.95 Y-5.381 E.00786 G3 X18.76 Y-6.364 I1.392 J-.779 E.03377 G1 X18.845 Y-6.487 E.00497 G1 X17.484 Y-6.487 E.04517 G2 X16.139 Y-4.398 I.897 J2.055 E.08732 G1 X16.219 Y-4.284 E.00462 G2 X15.862 Y-2.732 I2.194 J1.322 E.05372 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X15.89 Y-3.486 G1 X16.012 Y-3.902 G1 X16.219 Y-4.284 G1 X16.139 Y-4.398 G1 X16.133 Y-4.637 ;WIPE_END G1 X18.752 Y-10.052 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z8.8 F30000 G1 X30.752 Y-52.052 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:8.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;8.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9 I-1.134 J.442 P1 F30000 G1 X50 Y-1.738 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.3 Y-1.713 I.005 J1.74 E.01001 G1 X50.34 Y-1.709 E.00132 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.738 I-.662 J-1.609 E.2023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.993 Y-2.151 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X50 Y-2.145 E.00033 G3 X50.34 Y-2.118 I.006 J2.147 E.01133 G1 X50.42 Y-2.111 E.00265 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.582 Y-2.102 I-.818 J-1.985 E.23742 G1 X49.953 Y-2.146 E.01239 G1 X49.95 Y-2.584 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00155 G1 X50.383 Y-2.551 E.01182 G1 X50.505 Y-2.539 E.00378 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.91 Y-2.58 E.01282 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.383 Y-2.551 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.738 Y-1.907 ;WIPE_END G1 X48.816 Y-.632 Z9 F30000 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.611 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.284 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01218 G1 X50.954 Y-.954 E.01209 G1 X50.64 Y-1.18 E.01188 G1 X50.227 Y-1.326 E.01346 G1 X49.737 Y-1.323 E.01507 G1 X49.366 Y-1.183 E.01217 G1 X49.046 Y-.954 E.0121 G1 X48.839 Y-.665 E.01092 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.157 Y-.954 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.811 Y-.951 E.01065 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.195 Y-.94 E.01134 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.2 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440652 G1 F15000 G1 X50.153 Y-.13 E.00506 G1 X50 Y-.202 E.00549 G1 X49.857 Y-.143 E.00501 G1 X49.798 Y0 E.005 G1 X49.857 Y.143 E.005 G1 X50 Y.202 E.005 G1 X50.143 Y.143 E.00501 G1 X50.183 Y.055 E.00312 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00882 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.367 Y-.46 E.00906 G1 X50.087 Y-.582 E.00937 G1 X49.828 Y-.562 E.00801 G1 X49.582 Y-.418 E.00875 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.17 G1 X49.582 Y-.418 G1 X49.828 Y-.562 G1 X50.087 Y-.582 G1 X50.144 Y-.558 ;WIPE_END G1 X43.337 Y-4.011 Z9 F30000 G1 X-51.352 Y-52.052 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.959 Y-44.018 Z9 F30000 G1 X-42.748 Y-23.678 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.678 E.09918 G1 X-39.748 Y-47.948 E.80508 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.101 E.36651 G1 X-42.748 Y-21.101 E.09918 G1 X-42.748 Y-23.638 E.08415 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-23.998 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.085 E.00289 G1 X-40.165 Y-24.085 E.09918 G1 X-40.155 Y-48.355 E.80508 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.694 E.36651 G1 X-43.155 Y-20.694 E.09918 G1 X-43.155 Y-23.958 E.10827 G1 X-43.59 Y-23.563 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-51.09 Y-23.563 E.23045 G1 X-51.09 Y-24.52 E.02941 G1 X-40.6 Y-24.52 E.32233 G1 X-40.59 Y-48.79 E.74575 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.259 E.3395 G1 X-51.09 Y-20.259 E.32233 G1 X-51.09 Y-21.216 E.02941 G1 X-43.59 Y-21.216 E.23045 G1 X-43.59 Y-23.523 E.07088 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-24.041 F30000 ;TYPE:Gap infill ;WIDTH:0.565018 G1 F12000 G1 X-50.872 Y-24.041 E.31908 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-24.041 ;WIPE_END G1 X-50.872 Y-20.737 Z9 F30000 G1 Z8.6 G1 E.8 F1800 ;WIDTH:0.565022 G1 F12000 G1 X-43.373 Y-20.737 E.31908 G1 X-42.537 Y-21.662 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.312 E.01162 G1 X-41.259 Y-21.312 E.04239 G1 X-41.232 Y-21.354 E.00166 G3 X-39.595 Y-22.11 I1.798 J1.745 E.06121 G1 X-39.563 Y-23.467 E.04503 G1 X-39.815 Y-23.467 E.00835 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.563 Y-23.467 G1 X-39.595 Y-22.11 G1 X-39.922 Y-22.091 G1 X-39.982 Y-22.071 ;WIPE_END G1 X-39.18 Y-14.48 Z9 F30000 G1 X-37.769 Y-1.111 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.976 Y-1.01 E.00764 G3 X-39.977 Y-4.799 I-.824 J-1.988 E.21096 G3 X-38.92 Y-5.146 I1.178 J1.802 E.03734 G3 X-37.723 Y-1.134 I.121 J2.149 E.19089 G1 X-37.733 Y-1.129 E.00039 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.949 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00674 G3 X-39.16 Y-1.295 I-.667 J-1.61 E.03473 G3 X-38.893 Y-4.74 I.356 J-1.705 E.16671 G3 X-37.916 Y-1.498 I.093 J1.74 E.15394 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.301 Y-4.211 I-.661 J-1.13 E.13208 G3 X-38.865 Y-4.306 I.515 J1.307 E.01379 G3 X-38.113 Y-1.889 I.057 J1.308 E.10561 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.267 ;WIPE_END G1 X-40.156 Y5.36 Z9 F30000 G1 X-40.546 Y16.256 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.669 Y16.079 E.00715 G3 X-40.111 Y13.291 I1.861 J-1.078 E.10305 G3 X-38.92 Y12.854 I1.321 J1.758 E.04271 G3 X-40.512 Y16.314 I.112 J2.148 E.29313 G1 X-40.526 Y16.291 E.00089 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.208 Y16.03 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00627 G3 X-39.673 Y13.488 I1.51 J-.874 E.09121 G3 X-38.893 Y13.26 I.853 J1.472 E.02721 G3 X-40.19 Y16.066 I.086 J1.742 E.23756 G1 X-40.19 Y16.066 E.00002 G1 X-39.846 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.016 Y15.504 E.01014 G3 X-39.301 Y13.789 I1.208 J-.503 E.06344 G3 X-38.865 Y13.694 I.515 J1.307 E.01379 G3 X-39.827 Y15.821 I.057 J1.307 E.16398 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.016 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.655 Y14.019 ;WIPE_END G1 X-38.017 Y6.564 Z9 F30000 G1 X-35.102 Y-6.698 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.605 Y-6.487 Z9 F30000 G1 Z8.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-6.487 E.04284 G1 X-35.313 Y-6.15 E.01118 G1 X-35.991 Y-5.63 E.02834 G1 X-36.646 Y-4.581 E.04104 G1 X-36.908 Y-4.418 E.01023 G3 X-36.523 Y-3.637 I-2.091 J1.516 E.029 G1 X-36.319 Y-3.765 E.008 G3 X-35.336 Y-3.521 I.058 J1.871 E.03401 G1 X-35.313 Y-.909 E.08667 G1 X-35.991 Y-.389 E.02834 G1 X-36.646 Y.66 E.04104 G1 X-36.974 Y.865 E.01281 G3 X-38.612 Y.109 I.16 J-2.5 E.06121 G1 X-39.088 Y-.653 E.02982 G3 X-40.135 Y-1.053 I.443 J-2.732 E.03744 G1 X-40.577 Y-.901 E.01551 G1 X-41.232 Y-.389 E.02758 G1 X-41.937 Y.691 E.04278 G1 X-41.937 Y1.76 E.03545 G3 X-41.56 Y1.476 I.478 J.244 E.01619 G3 X-39.922 Y2.232 I-.16 J2.5 E.06121 G1 X-39.267 Y3.281 E.04104 G1 X-38.939 Y3.485 E.01281 G2 X-37.301 Y2.73 I-.16 J-2.5 E.06121 G1 X-36.646 Y1.681 E.04104 G1 X-36.319 Y1.476 E.01281 G3 X-35.336 Y1.72 I.058 J1.871 E.03401 G1 X-35.313 Y4.333 E.08667 G1 X-35.991 Y4.852 E.02834 G1 X-36.646 Y5.902 E.04104 G1 X-36.974 Y6.106 E.01281 G3 X-38.612 Y5.351 I.16 J-2.5 E.06121 G1 X-39.267 Y4.301 E.04104 G1 X-39.595 Y4.097 E.01281 G2 X-41.232 Y4.852 I.16 J2.5 E.06121 G1 X-41.937 Y5.932 E.04278 G1 X-41.937 Y7.001 E.03545 G3 X-41.56 Y6.718 I.478 J.244 E.01619 G3 X-39.922 Y7.473 I-.16 J2.5 E.06121 G1 X-39.267 Y8.522 E.04104 G1 X-38.939 Y8.727 E.01281 G2 X-37.301 Y7.971 I-.16 J-2.5 E.06121 G1 X-36.646 Y6.922 E.04104 G1 X-36.319 Y6.718 E.01281 G3 X-35.336 Y6.961 I.058 J1.871 E.03401 G1 X-35.313 Y9.574 E.08667 G1 X-35.991 Y10.093 E.02834 G1 X-36.646 Y11.143 E.04104 G1 X-36.974 Y11.347 E.01281 G3 X-38.612 Y10.592 I.16 J-2.5 E.06121 G1 X-39.267 Y9.543 E.04104 G1 X-39.595 Y9.338 E.01281 G2 X-41.232 Y10.093 I.16 J2.5 E.06121 G1 X-41.937 Y11.174 E.04278 G1 X-41.937 Y12.242 E.03545 G3 X-41.56 Y11.959 I.478 J.244 E.01619 G3 X-39.922 Y12.714 I-.16 J2.5 E.06121 G1 X-39.823 Y12.872 E.00619 G3 X-37.286 Y13.188 I1.001 J2.307 E.08897 G1 X-36.646 Y12.163 E.04006 G1 X-36.319 Y11.959 E.01281 G3 X-35.336 Y12.202 I.058 J1.871 E.03401 G1 X-35.313 Y14.815 E.08667 G1 X-35.991 Y15.335 E.02834 G1 X-36.646 Y16.384 E.04104 G1 X-37.05 Y16.584 E.01493 G3 X-41.148 Y15.269 I-1.751 J-1.587 E.17952 G1 X-41.937 Y16.415 E.04615 G1 X-41.937 Y17.484 E.03545 G3 X-41.56 Y17.2 I.478 J.244 E.01619 G3 X-39.922 Y17.955 I-.16 J2.5 E.06121 G1 X-39.59 Y18.487 E.02078 G1 X-37.344 Y18.487 E.07453 G1 X-36.646 Y17.405 E.0427 G1 X-36.319 Y17.2 E.01281 G3 X-35.336 Y17.444 I.058 J1.871 E.03401 G1 X-35.313 Y18.487 E.03461 G1 X-35.916 Y18.487 E.02 G1 X-37.261 Y-4.79 F30000 G1 F16200 G2 X-38.75 Y-5.353 I-1.608 J2.003 E.05369 G1 X-39.267 Y-6.181 E.03238 G1 X-39.595 Y-6.386 E.01281 G2 X-41.232 Y-5.63 I.16 J2.5 E.06121 G1 X-41.937 Y-4.55 E.04278 G1 X-41.937 Y-3.482 E.03545 G3 X-41.06 Y-3.687 I.563 J.428 E.03239 G3 X-40.107 Y-4.966 I2.501 J.869 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.677 Y-4.44 G1 X-41.06 Y-3.687 G1 X-41.435 Y-3.746 ;WIPE_END G1 X-38.27 Y3.199 Z9 F30000 G1 X-15.232 Y53.745 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z9 F30000 G1 X-5.6 Y52.94 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.255 J1.929 E.27025 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.608 Y54.177 I2.172 J.901 E.41851 G1 X-5.744 Y53.901 E.01021 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.672 J.79 E.48871 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290602 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 M73 P67 R25 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z9 F30000 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z9 F30000 G1 X-2.945 Y22.045 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.861 Y17.194 Z9 F30000 G1 X18.643 Y-.896 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.869 E.00545 G3 X17.023 Y-4.799 I-.281 J-2.131 E.19204 G3 X18.08 Y-5.146 I1.178 J1.802 E.03734 G3 X18.756 Y-.924 I.12 J2.146 E.20935 G1 X18.681 Y-.906 E.00256 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.563 Y-1.295 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.27 E.00457 G3 X17.327 Y-4.512 I-.235 J-1.728 E.15957 G3 X18.107 Y-4.74 I.853 J1.472 E.02721 G3 X18.651 Y-1.315 I.086 J1.742 E.16923 G1 X18.602 Y-1.304 E.00167 G1 X18.482 Y-1.727 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.691 E.00874 G3 X17.699 Y-4.211 I-.008 J-1.308 E.11098 G3 X18.135 Y-4.306 I.515 J1.307 E.01379 G3 X18.538 Y-1.737 I.057 J1.307 E.11729 G1 X18.522 Y-1.734 E.00052 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.691 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.948 Y-2.627 ;WIPE_END G1 X17.351 Y4.995 Z9 F30000 G1 X17.992 Y17.141 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.919 Y17.136 E.00244 G3 X17.023 Y13.201 I.282 J-2.133 E.17354 G3 X18.08 Y12.854 I1.178 J1.802 E.03734 G3 X18.2 Y17.154 I.121 J2.149 E.2283 M73 P68 R25 G1 X18.032 Y17.143 E.00558 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.019 Y16.735 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.972 Y16.731 E.00156 G3 X17.327 Y13.488 I.22 J-1.73 E.14436 G3 X18.107 Y13.26 I.853 J1.472 E.02721 G3 X18.2 Y16.745 I.086 J1.742 E.18432 G1 X18.059 Y16.737 E.00469 G1 X18.049 Y16.299 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.029 Y16.3 E.00063 G3 X17.699 Y13.789 I.164 J-1.299 E.10576 G3 X18.135 Y13.694 I.515 J1.307 E.01379 G3 X18.371 Y16.298 I.057 J1.308 E.12262 G1 X18.089 Y16.299 E.00865 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.029 Y16.3 G1 X17.699 Y16.211 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.897 Y14.944 ;WIPE_END G1 X16.057 Y7.358 Z9 F30000 G1 X14.502 Y-6.698 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.881 Y-4.958 Z9 F30000 G1 Z8.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X15.944 Y-3.671 I1.503 J2.079 E.05369 G1 X15.767 Y-3.561 E.00694 G1 X15.112 Y-2.511 E.04104 G1 X14.713 Y-2.2 E.01677 G1 X14.713 Y-4.532 E.07736 G2 X15.767 Y-4.581 I.493 J-.743 E.03743 G1 X16.422 Y-5.63 E.04104 G3 X18.06 Y-6.386 I1.798 J1.745 E.06121 G1 X18.387 Y-6.181 E.01281 G1 X18.983 Y-5.227 E.0373 G3 X20.015 Y-4.511 I-.789 J2.238 E.04216 G2 X21.008 Y-4.581 I.448 J-.726 E.03527 G1 X21.337 Y-5.108 E.0206 G1 X21.337 Y-3.765 E.04454 G1 X21.008 Y-3.561 E.01285 G1 X20.555 Y-2.835 E.02837 G3 X19.914 Y-1.374 I-2.896 J-.399 E.0536 G1 X14.713 Y-.919 F30000 G1 F16200 G1 X14.713 Y.709 E.05401 G2 X15.767 Y.66 I.493 J-.743 E.03743 G1 X16.422 Y-.389 E.04104 G1 X17.077 Y-.901 E.02758 G2 X18.559 Y-.664 I1.13 J-2.319 E.05052 G2 X20.353 Y.846 I2.465 J-1.107 E.08046 G2 X21.008 Y.66 I.196 J-.557 E.02408 G1 X21.337 Y.133 E.0206 G1 X21.337 Y1.476 E.04454 G1 X21.008 Y1.681 E.01285 G1 X20.353 Y2.73 E.04104 G3 X19.043 Y3.467 I-1.723 J-1.53 E.05079 G3 X18.387 Y3.281 I-.196 J-.557 E.02408 G1 X17.732 Y2.232 E.04104 G2 X16.422 Y1.495 I-1.723 J1.53 E.05079 G2 X15.767 Y1.681 I-.196 J.557 E.02408 G1 X15.112 Y2.73 E.04104 G1 X14.713 Y3.041 E.01677 G1 X14.713 Y5.951 E.09651 G2 X15.767 Y5.902 I.493 J-.743 E.03743 G1 X16.422 Y4.852 E.04104 G3 X17.732 Y4.116 I1.723 J1.53 E.05079 G3 X18.387 Y4.301 I.196 J.557 E.02408 G1 X19.043 Y5.351 E.04104 G2 X20.353 Y6.087 I1.723 J-1.53 E.05079 G2 X21.008 Y5.902 I.196 J-.557 E.02408 G1 X21.337 Y5.375 E.0206 G1 X21.337 Y6.718 E.04454 G1 X21.008 Y6.922 E.01285 G1 X20.353 Y7.971 E.04104 G3 X19.043 Y8.708 I-1.723 J-1.53 E.05079 G3 X18.387 Y8.522 I-.196 J-.557 E.02408 G1 X17.732 Y7.473 E.04104 G2 X16.422 Y6.736 I-1.723 J1.53 E.05079 G2 X15.767 Y6.922 I-.196 J.557 E.02408 G1 X15.112 Y7.971 E.04104 G1 X14.713 Y8.283 E.01677 G1 X14.713 Y9.911 E.05401 G1 X16.347 Y13.532 F30000 G1 F16200 G3 X17.704 Y12.692 I2.016 J1.738 E.05376 G2 X16.422 Y11.977 I-1.676 J1.5 E.04958 G2 X15.767 Y12.163 I-.196 J.557 E.02408 G1 X15.112 Y13.213 E.04104 G1 X14.713 Y13.524 E.01677 G1 X14.713 Y11.192 E.07736 G2 X15.767 Y11.143 I.493 J-.743 E.03743 G1 X16.422 Y10.093 E.04104 G3 X17.732 Y9.357 I1.723 J1.53 E.05079 G3 X18.387 Y9.543 I.196 J.557 E.02408 G1 X19.043 Y10.592 E.04104 G2 X20.353 Y11.329 I1.723 J-1.53 E.05079 G2 X21.008 Y11.143 I.196 J-.557 E.02408 G1 X21.337 Y10.616 E.0206 G1 X21.337 Y11.959 E.04454 G1 X21.008 Y12.163 E.01285 G1 X20.353 Y13.213 E.04104 G1 X20.008 Y13.482 E.01449 G3 X20.043 Y16.464 I-1.862 J1.513 E.10675 G2 X21.008 Y16.384 I.426 J-.719 E.03425 G1 X21.337 Y15.857 E.0206 G1 X21.337 Y17.2 E.04454 G1 X21.008 Y17.405 E.01285 G1 X20.311 Y18.487 E.0427 G1 X18.064 Y18.487 E.07453 G2 X16.422 Y17.219 I-2.246 J1.212 E.07087 G2 X15.767 Y17.405 I-.196 J.557 E.02408 G1 X15.112 Y18.454 E.04104 G1 X14.713 Y18.487 E.01326 G1 X14.713 Y16.433 E.06812 G2 X16.038 Y15.95 I.495 J-.699 E.05493 G2 X17.136 Y17.107 I2.381 J-1.159 E.05375 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X16.527 Y16.673 G1 X16.038 Y15.95 G1 X15.837 Y16.272 ;WIPE_END G1 X16.677 Y8.686 Z9 F30000 G1 X18.752 Y-10.052 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z9 F30000 G1 X30.752 Y-52.052 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:8.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.2 I-1.134 J.442 P1 F30000 G1 X50 Y-1.738 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.297 Y-1.714 I.005 J1.74 E.00989 G1 X50.34 Y-1.709 E.00144 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.738 I-.662 J-1.609 E.2023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.337 Y-2.119 I.006 J2.147 E.01122 G1 X50.42 Y-2.111 E.00277 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.144 I-.818 J-1.985 E.25006 G1 X49.959 Y-2.585 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00128 G1 X50.379 Y-2.552 E.01172 G1 X50.505 Y-2.539 E.00388 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.919 Y-2.581 E.01309 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.379 Y-2.552 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.744 Y-1.902 ;WIPE_END G1 X50.155 Y-.955 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X49.811 Y-.951 E.01057 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.192 Y-.94 E.01143 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440493 G1 F15000 G1 X50.155 Y.127 E.00498 G1 X50.2 Y.019 E.00379 G1 X50.153 Y-.13 E.00506 G1 X49.993 Y-.201 E.00568 G1 X49.844 Y-.127 E.00538 G1 X49.8 Y.02 E.00497 G1 X49.873 Y.155 E.00498 G1 X49.982 Y.188 E.00369 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00882 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.366 Y-.46 E.00908 G1 X50.085 Y-.583 E.00942 G1 X49.827 Y-.562 E.00794 G1 X49.582 Y-.418 E.00875 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X51.038 Y.851 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01219 G1 X50.954 Y-.954 E.01208 G1 X50.641 Y-1.18 E.01186 G1 X50.224 Y-1.327 E.01357 G1 X49.737 Y-1.323 E.01498 G1 X49.366 Y-1.183 E.01217 G1 X49.046 Y-.954 E.0121 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.611 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.284 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.009 Y.879 E.01092 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.749 Y1.122 G1 X50.39 Y1.284 G1 X50 Y1.349 G1 X49.611 Y1.285 G1 X49.251 Y1.122 G1 X49.203 Y1.077 ;WIPE_END G1 X42.455 Y-2.488 Z9.2 F30000 G1 X-51.352 Y-52.052 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.963 Y-44.016 Z9.2 F30000 G1 X-42.748 Y-23.63 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.63 E.09918 G1 X-39.748 Y-47.948 E.80668 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.149 E.3681 G1 X-42.748 Y-21.149 E.09918 G1 X-42.748 Y-23.59 E.08097 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-23.864 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-43.155 Y-24.037 E.00573 G1 X-40.165 Y-24.037 E.09918 G1 X-40.155 Y-48.355 E.80668 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.742 E.3681 G1 X-43.155 Y-20.742 E.09918 G1 X-43.155 Y-23.824 E.10225 G1 X-43.59 Y-23.429 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9360 G1 X-44.207 Y-23.429 E.01896 G1 X-50.326 Y-23.429 E.18802 G1 X-51.09 Y-23.429 E.02348 G1 X-51.09 Y-24.472 E.03205 G1 F12000 G1 X-50.46 Y-24.472 E.01936 G1 X-41.107 Y-24.472 E.28739 G1 X-40.6 Y-24.472 E.01558 G1 X-40.6 Y-24.979 E.01558 G1 X-40.59 Y-48.16 E.71229 G1 X-40.59 Y-48.79 E.01936 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.591 Y-9.84 E.01936 G1 X-40.6 Y-19.799 E.30601 G1 X-40.6 Y-20.307 E.01561 G1 X-41.107 Y-20.307 E.01558 G1 X-50.46 Y-20.307 E.28739 G1 X-51.09 Y-20.307 E.01936 G1 F9360 G1 X-51.09 Y-21.35 E.03205 G1 X-50.326 Y-21.35 E.02348 G1 X-44.207 Y-21.35 E.18802 G1 X-43.59 Y-21.35 E.01896 G1 F12000 G1 X-43.59 Y-23.389 E.06265 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.373 Y-23.951 F30000 ;TYPE:Gap infill ;WIDTH:0.65064 G1 F12000 G1 X-50.872 Y-23.951 E.37141 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-23.951 ;WIPE_END G1 X-50.872 Y-20.828 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 G1 F12000 G1 X-43.373 Y-20.828 E.37141 G1 X-42.537 Y-21.75 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.36 E.01292 G1 X-41.298 Y-21.36 E.04109 G1 X-40.577 Y-21.803 E.02807 G3 X-39.563 Y-21.764 I.46 J1.218 E.03458 G1 X-39.563 Y-23.392 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.563 Y-21.764 G1 X-39.915 Y-21.882 ;WIPE_END G1 X-39.121 Y-14.291 Z9.2 F30000 G1 X-37.745 Y-1.134 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.977 Y-1.012 E.00868 G3 X-40.111 Y-4.709 I-.83 J-1.985 E.20606 G3 X-38.916 Y-5.147 I1.322 J1.759 E.04284 G3 X-37.626 Y-1.199 I.109 J2.149 E.1864 G1 X-37.71 Y-1.153 E.00317 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.939 Y-1.491 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00726 G3 X-39.673 Y-4.512 I-.674 J-1.609 E.1747 G3 X-38.889 Y-4.741 I.854 J1.473 E.02735 G3 X-37.853 Y-1.538 I.082 J1.742 E.15099 G1 X-37.904 Y-1.51 E.00193 G1 X-38.144 Y-1.872 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.3 Y-1.792 E.00537 G3 X-39.301 Y-4.211 I-.508 J-1.207 E.12681 G3 X-38.861 Y-4.306 I.515 J1.309 E.01391 G3 X-38.095 Y-1.9 I.054 J1.308 E.10486 G1 X-38.11 Y-1.892 E.00053 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.3 Y-1.792 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.727 Y-2.073 G1 X-39.876 Y-2.268 ;WIPE_END G1 X-40.152 Y5.36 Z9.2 F30000 G1 X-40.546 Y16.256 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.669 Y16.079 E.00714 G3 X-40.111 Y13.291 I1.862 J-1.077 E.10306 G3 X-38.916 Y12.853 I1.322 J1.759 E.04284 G3 X-40.512 Y16.314 I.109 J2.149 E.29309 G1 X-40.526 Y16.29 E.0009 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.208 Y16.03 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00626 G3 X-39.673 Y13.488 I1.51 J-.874 E.09121 G3 X-38.889 Y13.259 I.854 J1.473 E.02735 G3 X-40.19 Y16.066 I.082 J1.742 E.23744 G1 X-40.19 Y16.065 E.00003 G1 X-39.846 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.016 Y15.504 E.01016 G3 X-39.301 Y13.789 I1.209 J-.502 E.06345 G3 X-38.861 Y13.694 I.515 J1.309 E.01391 G3 X-39.828 Y15.821 I.054 J1.308 E.16394 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.016 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.656 Y14.019 ;WIPE_END G1 X-38.017 Y6.564 Z9.2 F30000 G1 X-35.102 Y-6.698 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.537 Y-6.487 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-6.487 E.04058 G1 X-35.313 Y-6.082 E.01343 G1 X-35.991 Y-5.711 E.02564 G1 X-36.646 Y-4.965 E.03293 G3 X-37.113 Y-4.656 I-.595 J-.392 E.01906 G3 X-36.459 Y-3.33 I-1.756 J1.691 E.04984 G3 X-35.991 Y-3.54 I.479 J.443 E.01747 G1 X-35.313 Y-3.446 E.02271 G1 X-35.313 Y-.841 E.08641 G1 X-35.991 Y-.47 E.02564 G3 X-36.974 Y.545 I-3.551 J-2.458 E.04705 G3 X-38.612 Y.19 I-.476 J-1.761 E.05776 G1 X-39.267 Y-.556 E.03293 G2 X-39.913 Y-.917 I-1.355 J1.668 E.02465 G2 X-41.232 Y-.47 I-.123 J1.809 E.04744 G3 X-41.937 Y.317 I-2.725 J-1.733 E.03518 G1 X-41.937 Y2.121 E.05984 G3 X-41.56 Y1.797 I1.167 J.975 E.01656 G3 X-39.922 Y2.151 I.476 J1.761 E.05776 G2 X-38.939 Y3.165 I3.551 J-2.458 E.04705 G2 X-37.301 Y2.811 I.476 J-1.761 E.05776 G1 X-36.646 Y2.065 E.03293 G3 X-35.991 Y1.701 I.753 J.586 E.02554 G1 X-35.313 Y1.796 E.02271 G1 X-35.313 Y4.401 E.08641 G1 X-35.991 Y4.772 E.02564 G3 X-36.974 Y5.786 I-3.551 J-2.459 E.04705 G3 X-38.612 Y5.431 I-.476 J-1.761 E.05776 G2 X-39.595 Y4.417 I-3.551 J2.459 E.04705 G2 X-41.232 Y4.772 I-.476 J1.761 E.05776 G3 X-41.937 Y5.558 I-2.725 J-1.733 E.03518 G1 X-41.937 Y7.362 E.05984 G3 X-41.56 Y7.038 I1.167 J.975 E.01656 G3 X-39.922 Y7.392 I.476 J1.761 E.05776 G2 X-38.939 Y8.406 I3.551 J-2.458 E.04705 G2 X-37.301 Y8.052 I.476 J-1.761 E.05776 G1 X-36.646 Y7.306 E.03293 G3 X-35.991 Y6.943 I.753 J.586 E.02554 G1 X-35.313 Y7.037 E.02271 G1 X-35.313 Y9.642 E.08641 G1 X-35.991 Y10.013 E.02564 G3 X-36.974 Y11.027 I-3.551 J-2.458 E.04705 G3 X-38.612 Y10.673 I-.476 J-1.761 E.05776 G2 X-39.595 Y9.658 I-3.551 J2.459 E.04705 G2 X-41.232 Y10.013 I-.476 J1.761 E.05776 G3 X-41.937 Y10.799 I-2.725 J-1.733 E.03518 G1 X-41.937 Y12.603 E.05984 G3 X-41.56 Y12.279 I1.167 J.975 E.01656 G3 X-39.922 Y12.634 I.476 J1.761 E.05776 G1 X-39.746 Y12.834 E.00886 G3 X-37.242 Y13.226 I.914 J2.354 E.08805 G1 X-36.646 Y12.547 E.02997 G3 X-35.991 Y12.184 I.753 J.586 E.02554 G1 X-35.313 Y12.278 E.02271 G1 X-35.313 Y14.883 E.08641 G1 X-35.991 Y15.254 E.02564 G1 X-36.646 Y16 E.03293 G3 X-41.152 Y15.209 I-2.142 J-1.03 E.20438 G2 X-41.937 Y16.041 I11.929 J12.045 E.03793 G1 X-41.937 Y17.845 E.05984 G3 X-41.232 Y17.425 I1.049 J.961 E.02758 G3 X-39.385 Y18.487 I-.096 J2.305 E.07348 G1 X-37.26 Y18.487 E.07049 G1 X-36.646 Y17.789 E.03083 G3 X-35.991 Y17.425 I.753 J.586 E.02554 G1 X-35.313 Y17.52 E.02271 G1 X-35.313 Y18.487 E.03209 G1 X-35.974 Y18.487 E.02193 G1 X-37.359 Y-4.876 F30000 G1 F16200 G2 X-38.88 Y-5.357 I-1.539 J2.221 E.05373 G2 X-39.595 Y-6.065 I-2.495 J1.802 E.03353 G2 X-41.232 Y-5.711 I-.476 J1.761 E.05776 G3 X-41.937 Y-4.925 I-2.725 J-1.733 E.03518 G1 X-41.937 Y-3.121 E.05984 G3 X-41.103 Y-3.524 I.852 J.699 E.03172 G3 X-40.247 Y-4.871 I2.6 J.707 E.05374 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.849 Y-4.183 G1 X-41.103 Y-3.524 G1 X-41.477 Y-3.459 ;WIPE_END G1 X-38.294 Y3.478 Z9.2 F30000 G1 X-15.232 Y53.745 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.745 E.28701 G3 X-15.232 Y52.255 I-.273 J1.954 E.06749 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z9.2 F30000 G1 X-5.6 Y52.94 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-19.49 Y51.694 I-2.671 J-.791 E.28596 G3 X-14.359 Y52.21 I2.46 J1.309 E.2024 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290605 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.322 Y52.677 E.00644 G1 X-3.518 Y52.596 E.00653 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00947 G1 X-3.173 Y52.316 E.00937 G1 X-3.469 Y52.222 E.00953 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13118 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.793 Y51.657 E.01239 G1 X-3.169 Y51.501 E.0125 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.169 Y51.501 G1 X-2.793 Y51.657 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z9.2 F30000 G1 X-2.945 Y22.045 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.861 Y17.194 Z9.2 F30000 G1 X18.637 Y-.895 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.869 E.00526 G3 X17.026 Y-4.801 I-.281 J-2.131 E.19218 G3 X18.084 Y-5.147 I1.175 J1.805 E.03734 G3 X18.756 Y-.924 I.116 J2.147 E.20921 G1 X18.676 Y-.904 E.00274 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.558 Y-1.294 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.27 E.00438 G3 X17.327 Y-4.512 I-.235 J-1.728 E.15956 G3 X18.111 Y-4.741 I.854 J1.473 E.02735 G3 X18.651 Y-1.315 I.082 J1.742 E.16911 G1 X18.597 Y-1.303 E.00186 G1 X18.473 Y-1.721 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.703 E.00318 G3 X17.699 Y-4.211 I-.178 J-1.296 E.11622 G3 X18.139 Y-4.306 I.515 J1.309 E.01391 G3 X18.538 Y-1.737 I.053 J1.307 E.11719 G1 X18.512 Y-1.731 E.00085 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.703 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.943 Y-2.636 ;WIPE_END G1 X17.298 Y4.988 Z9.2 F30000 G1 X17.863 Y17.125 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.643 Y17.081 E.00745 G3 X17.026 Y13.199 I.558 J-2.078 E.16433 G3 X18.084 Y12.853 I1.175 J1.805 E.03734 G3 X17.919 Y17.136 I.117 J2.149 E.23752 G1 X17.902 Y17.132 E.00057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.942 Y16.726 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.688 E.00657 G3 X17.327 Y13.488 I.445 J-1.686 E.13676 G3 X18.111 Y13.259 I.854 J1.473 E.02735 G3 X17.982 Y16.732 I.082 J1.742 E.19145 G1 X18.026 Y16.298 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.697 Y16.213 E.01042 G3 X17.699 Y13.789 I.495 J-1.212 E.09519 G3 X18.139 Y13.694 I.515 J1.309 E.01391 G3 X18.065 Y16.304 I.054 J1.308 E.13194 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.697 Y16.213 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.9 Y14.92 ;WIPE_END G1 X16.059 Y7.334 Z9.2 F30000 G1 X14.502 Y-6.698 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.54 Y-4.685 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X15.85 Y-3.245 I1.706 J1.703 E.05398 G2 X15.112 Y-2.431 I2.088 J2.636 E.03664 G1 X14.713 Y-2.207 E.01516 G1 X14.713 Y-4.651 E.08109 G2 X15.767 Y-4.965 I.284 J-.971 E.03855 G1 X16.422 Y-5.711 E.03293 G3 X18.06 Y-6.065 I1.162 J1.406 E.05776 G3 X18.848 Y-5.273 I-1.997 J2.774 E.03723 G3 X19.884 Y-4.66 I-.706 J2.377 E.04036 G2 X21.008 Y-4.965 I.333 J-.996 E.04094 G1 X21.337 Y-5.339 E.01653 G1 X21.336 Y-3.445 E.06285 G2 X20.535 Y-2.638 I2.034 J2.819 E.03787 G3 X19.771 Y-1.238 I-2.611 J-.516 E.05375 G1 X14.713 Y-1.038 F30000 G1 F16200 G1 X14.713 Y.59 E.05401 G2 X15.439 Y.545 I.31 J-.867 E.02481 G2 X16.422 Y-.47 I-2.569 J-3.473 E.04705 G1 X17.077 Y-.838 E.02493 G1 X17.213 Y-.855 E.00453 G2 X18.285 Y-.64 I.989 J-2.152 E.03661 G3 X19.043 Y.19 I-2.125 J2.701 E.03744 G2 X20.353 Y.64 I1.204 J-1.375 E.04713 G2 X21.337 Y-.098 I-.474 J-1.657 E.04172 G1 X21.337 Y1.796 E.06284 G2 X20.353 Y2.811 I3.162 J4.052 E.04703 G3 X19.043 Y3.26 I-1.204 J-1.375 E.04713 G1 X18.715 Y3.165 E.01132 G3 X17.732 Y2.151 I2.569 J-3.473 E.04705 G2 X16.422 Y1.701 I-1.204 J1.375 E.04713 G1 X16.094 Y1.797 E.01132 G2 X15.112 Y2.811 I2.569 J3.473 E.04705 G1 X14.713 Y3.035 E.01516 G1 X14.713 Y5.831 E.09278 G2 X15.439 Y5.786 I.31 J-.867 E.02481 G2 X16.422 Y4.772 I-2.569 J-3.473 E.04705 G3 X17.732 Y4.322 I1.204 J1.375 E.04713 G1 X18.06 Y4.417 E.01132 G3 X19.043 Y5.431 I-2.569 J3.473 E.04705 G2 X20.353 Y5.881 I1.204 J-1.375 E.04713 G2 X21.337 Y5.143 I-.474 J-1.657 E.04172 G1 X21.337 Y7.037 E.06284 G2 X20.353 Y8.052 I3.162 J4.052 E.04703 G3 X19.043 Y8.502 I-1.204 J-1.375 E.04713 G1 X18.715 Y8.406 E.01132 G3 X17.732 Y7.392 I2.569 J-3.473 E.04705 G2 X16.422 Y6.943 I-1.204 J1.375 E.04713 G1 X16.094 Y7.038 E.01132 G2 X15.112 Y8.052 I2.569 J3.473 E.04705 G1 X14.713 Y8.276 E.01516 G1 X14.713 Y9.904 E.05401 G1 X16.393 Y13.48 F30000 G1 F16200 G3 X17.771 Y12.678 I1.952 J1.769 E.05375 G2 X16.422 Y12.184 I-1.239 J1.293 E.04905 G1 X16.094 Y12.279 E.01132 G2 X15.112 Y13.293 I2.569 J3.473 E.04705 G1 X14.713 Y13.517 E.01516 G1 X14.713 Y11.073 E.08109 G2 X15.439 Y11.027 I.31 J-.867 E.02481 G2 X16.422 Y10.013 I-2.569 J-3.473 E.04705 G3 X17.732 Y9.563 I1.204 J1.375 E.04713 G1 X18.06 Y9.658 E.01132 G3 X19.043 Y10.673 I-2.569 J3.473 E.04705 G2 X20.353 Y11.122 I1.204 J-1.375 E.04713 G2 X21.337 Y10.385 I-.474 J-1.657 E.04172 G1 X21.337 Y12.279 E.06284 G2 X20.353 Y13.293 I3.162 J4.052 E.04703 G1 X20.011 Y13.485 E.01299 G3 X20.145 Y16.338 I-1.814 J1.515 E.10172 G1 X20.353 Y16.364 E.00693 G2 X21.337 Y15.626 I-.474 J-1.657 E.04172 G1 X21.337 Y17.52 E.06284 G2 X20.395 Y18.487 I3.053 J3.918 E.04492 G1 X18.27 Y18.487 E.07049 G2 X16.422 Y17.425 I-1.943 J1.244 E.07348 G1 X16.094 Y17.52 E.01132 G2 X15.153 Y18.487 I2.446 J3.323 E.04494 G1 X14.713 Y18.487 E.0146 G1 X14.713 Y16.314 E.07208 G1 X15.112 Y16.364 E.01332 G2 X15.968 Y15.771 I-.393 J-1.483 E.03527 G2 X16.966 Y17.015 I2.475 J-.962 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X16.323 Y16.44 G1 X15.968 Y15.771 G1 X15.692 Y16.031 ;WIPE_END G1 X16.581 Y8.45 Z9.2 F30000 G1 X18.752 Y-10.052 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z9.2 F30000 G1 X30.752 Y-52.052 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:9 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;9 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.4 I-1.134 J.442 P1 F30000 G1 X50 Y-1.738 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.294 Y-1.714 I.005 J1.739 E.00978 G1 X50.34 Y-1.709 E.00155 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.737 I-.662 J-1.609 E.2023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.333 Y-2.119 I.006 J2.147 E.0111 G1 X50.42 Y-2.111 E.00288 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.144 I-.818 J-1.985 E.25006 G1 X49.967 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00103 G1 X50.376 Y-2.552 E.01161 G1 X50.505 Y-2.539 E.00398 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.927 Y-2.582 E.01333 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.376 Y-2.552 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.751 Y-1.896 ;WIPE_END G1 X48.962 Y.852 Z9.4 F30000 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X49.251 Y1.122 E.01213 G1 X49.611 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.284 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01215 G1 X51.246 Y.516 E.01212 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01219 G1 X50.954 Y-.954 E.01208 G1 X50.641 Y-1.179 E.01184 G1 X50.221 Y-1.327 E.01368 G1 X49.737 Y-1.323 E.01489 G1 X49.366 Y-1.183 E.01217 G1 X49.046 Y-.954 E.0121 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.941 Y.818 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440333 G1 F15000 G1 X50.156 Y.127 E.00498 G1 X50.2 Y.019 E.00379 G1 X50.153 Y-.13 E.00507 G1 X49.994 Y-.201 E.00564 G1 X49.844 Y-.127 E.00542 G1 X49.8 Y.02 E.00497 G1 X49.873 Y.155 E.00498 G1 X49.982 Y.188 E.00369 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.12 Y-.573 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.885 Y-.58 E.00722 G1 X49.626 Y-.454 E.00883 G1 X49.454 Y-.226 E.00878 G1 X49.415 Y.058 E.00881 G1 X49.509 Y.328 E.0088 G1 X49.723 Y.519 E.00881 G1 X50 Y.591 E.0088 G1 X50.278 Y.519 E.00881 G1 X50.491 Y.328 E.0088 G1 X50.585 Y.057 E.00882 G1 X50.546 Y-.226 E.00879 G1 X50.366 Y-.461 E.0091 G1 X50.156 Y-.556 E.00707 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.152 Y-.955 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.811 Y-.951 E.01048 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.941 E.01151 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.728 Y.618 ;WIPE_END G1 X43.945 Y-2.882 Z9.4 F30000 G1 X-51.352 Y-52.052 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-49.969 Y-44.014 Z9.4 F30000 G1 X-42.748 Y-23.554 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.758 Y-23.554 E.09918 G1 X-39.748 Y-47.948 E.80918 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.052 E1.25707 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.224 E.37061 G1 X-42.748 Y-21.224 E.09918 G1 X-42.748 Y-23.514 E.07595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.155 Y-23.629 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-50.655 Y-23.629 E.24879 G1 X-50.655 Y-23.961 E.01101 G1 X-40.165 Y-23.961 E.34797 G1 X-40.155 Y-48.355 E.80918 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.645 E1.28408 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.817 E.37061 G1 X-50.655 Y-20.817 E.34797 G1 X-50.655 Y-21.149 E.01101 G1 X-43.155 Y-21.149 E.24879 G1 X-43.155 Y-23.589 E.08094 G1 X-43.59 Y-23.194 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2400 G1 X-43.8 Y-23.194 E.00645 G1 F2100 G1 X-51.09 Y-23.194 E.224 M106 S255 G1 X-51.09 Y-24.396 E.03693 G1 F12000 G1 X-50.46 Y-24.396 E.01936 G1 X-41.086 Y-24.396 E.28804 G1 X-40.6 Y-24.396 E.01493 G1 X-40.6 Y-24.882 E.01493 G1 X-40.59 Y-48.16 E.71527 G1 X-40.59 Y-48.79 E.01936 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.21 E1.21618 G1 X-40.59 Y-9.21 E.06391 G1 X-40.591 Y-9.84 E.01936 G1 X-40.6 Y-19.897 E.30902 G1 X-40.6 Y-20.382 E.0149 G1 X-41.086 Y-20.382 E.01493 G1 X-50.46 Y-20.382 E.28804 G1 X-51.09 Y-20.382 E.01936 G1 F2100 G1 X-51.09 Y-21.584 E.03693 G1 X-43.8 Y-21.584 E.224 M106 S255 G1 F2400 G1 X-43.59 Y-21.584 E.00645 G1 F12000 G1 X-43.59 Y-23.154 E.04824 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-45.59 Y-23.165 ;WIPE_END G1 X-42.537 Y-21.859 Z9.4 F30000 G1 Z9 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-42.537 Y-21.436 E.01405 G1 X-41.332 Y-21.436 E.03996 G1 X-41.232 Y-21.526 E.00448 G1 X-40.577 Y-21.769 E.02318 G3 X-39.563 Y-21.54 I.198 J1.48 E.03523 G1 X-39.563 Y-23.168 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.563 Y-21.54 G1 X-39.893 Y-21.712 ;WIPE_END G1 X-39.1 Y-14.121 Z9.4 F30000 G1 X-37.745 Y-1.134 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-37.977 Y-1.014 E.00869 G3 X-38.912 Y-5.147 I-.823 J-1.986 E.24833 G3 X-37.63 Y-1.197 I.112 J2.147 E.1867 G1 X-37.709 Y-1.153 E.00301 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.938 Y-1.491 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.134 Y-1.391 E.00729 G3 X-39.673 Y-4.512 I-.674 J-1.608 E.17458 G3 X-38.885 Y-4.741 I.854 J1.474 E.02748 G3 X-37.857 Y-1.538 I.078 J1.742 E.15092 G1 X-37.903 Y-1.511 E.00176 G1 X-38.143 Y-1.872 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.3 Y-1.793 E.00541 G3 X-39.301 Y-4.211 I-.507 J-1.206 E.12672 G3 X-38.857 Y-4.307 I.516 J1.311 E.01404 G3 X-38.099 Y-1.899 I.05 J1.307 E.10483 G1 X-38.109 Y-1.893 E.00035 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.3 Y-1.793 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.88 Y-2.262 ;WIPE_END G1 X-40.154 Y5.365 Z9.4 F30000 G1 X-40.547 Y16.256 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.672 Y16.081 E.00714 G3 X-39.877 Y13.134 I1.862 J-1.078 E.11251 G3 X-38.912 Y12.853 I1.053 J1.817 E.03368 G3 X-40.514 Y16.315 I.103 J2.149 E.29295 G1 X-40.527 Y16.291 E.00093 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.208 Y16.029 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00625 G3 X-39.673 Y13.488 I1.51 J-.874 E.0912 G3 X-38.885 Y13.259 I.854 J1.474 E.02748 G3 X-40.189 Y16.066 I.078 J1.743 E.23731 G1 X-40.19 Y16.065 E.00004 G1 X-39.845 Y15.788 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.016 Y15.504 E.01018 G3 X-39.301 Y13.789 I1.209 J-.502 E.06344 G3 X-38.857 Y13.693 I.516 J1.311 E.01404 G3 X-39.827 Y15.822 I.05 J1.308 E.1638 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.016 Y15.504 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.66 Y14.015 ;WIPE_END G1 X-38.02 Y6.561 Z9.4 F30000 G1 X-35.102 Y-6.698 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.498 Y-6.487 Z9.4 F30000 G1 Z9 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-6.487 E.03932 G1 X-35.313 Y-6.044 E.0147 G1 X-35.991 Y-5.803 E.02387 G3 X-37.252 Y-4.783 I-3.564 J-3.118 E.05407 G3 X-36.442 Y-3.115 I-1.549 J1.784 E.06321 G3 X-35.336 Y-3.425 I.889 J1.047 E.03929 G1 X-35.313 Y-.802 E.08698 G1 X-35.991 Y-.561 E.02387 G3 X-37.301 Y.483 I-3.486 J-3.032 E.05588 G3 X-39.267 Y-.316 I-.333 J-1.999 E.07406 G2 X-40.577 Y-.804 I-1.11 J.977 E.04831 G1 X-41.232 Y-.561 E.02318 G3 X-41.937 Y.079 I-15.153 J-15.956 E.03159 G1 X-41.937 Y2.35 E.07531 G3 X-40.577 Y1.817 I1.119 J.854 E.05093 G1 X-39.922 Y2.059 E.02318 G2 X-38.612 Y3.103 I3.486 J-3.032 E.05588 G2 X-36.646 Y2.305 I.333 J-1.999 E.07406 G3 X-35.313 Y1.825 I1.078 J.904 E.04925 G1 X-35.313 Y4.439 E.0867 G1 X-35.991 Y4.68 E.02387 G3 X-37.301 Y5.724 I-3.486 J-3.032 E.05588 G3 X-39.267 Y4.925 I-.333 J-1.999 E.07406 G2 X-40.577 Y4.437 I-1.11 J.977 E.04831 G1 X-41.232 Y4.68 E.02318 G3 X-41.937 Y5.321 I-15.153 J-15.956 E.03159 G1 X-41.937 Y7.591 E.07531 G3 X-40.577 Y7.058 I1.119 J.854 E.05093 G1 X-39.922 Y7.301 E.02318 G2 X-38.612 Y8.344 I3.486 J-3.032 E.05588 G2 X-36.646 Y7.546 I.333 J-1.999 E.07406 G3 X-35.313 Y7.066 I1.078 J.904 E.04925 G1 X-35.313 Y9.68 E.0867 G1 X-35.991 Y9.921 E.02387 G3 X-37.301 Y10.965 I-3.486 J-3.032 E.05588 G3 X-39.267 Y10.167 I-.333 J-1.999 E.07406 G2 X-40.577 Y9.679 I-1.11 J.977 E.04831 G1 X-41.232 Y9.921 E.02318 G3 X-41.937 Y10.562 I-15.153 J-15.956 E.03159 G1 X-41.937 Y12.832 E.07531 G3 X-40.577 Y12.299 I1.119 J.854 E.05093 G1 X-39.922 Y12.542 E.02318 G1 X-39.646 Y12.794 E.01241 G2 X-41.157 Y15.135 I.851 J2.207 E.09882 G1 X-41.232 Y15.163 E.00267 G3 X-41.937 Y15.803 I-15.154 J-15.957 E.03159 G1 X-41.937 Y18.074 E.07531 G3 X-40.577 Y17.541 I1.119 J.854 E.05093 G1 X-39.922 Y17.783 E.02318 G2 X-39.146 Y18.487 I16.646 J-17.593 E.03476 G1 X-37.149 Y18.487 E.06624 G3 X-35.991 Y17.582 I3.045 J2.705 E.049 G1 X-35.313 Y17.549 E.02252 G1 X-35.336 Y14.92 E.08722 G2 X-36.528 Y15.653 I.309 J1.839 E.04759 G2 X-37.184 Y13.277 I-2.39 J-.619 E.08558 G3 X-35.991 Y12.341 I3.146 J2.779 E.05057 G1 X-35.313 Y12.308 E.02252 G1 X-35.313 Y10.679 E.05401 G1 X-37.492 Y-4.965 F30000 G1 F16200 G2 X-39.04 Y-5.35 I-1.385 J2.264 E.05375 G2 X-39.595 Y-5.843 I-11.672 J12.57 E.02462 G2 X-41.232 Y-5.803 I-.781 J1.55 E.0566 G3 X-41.937 Y-5.162 I-15.153 J-15.956 E.03159 G1 X-41.937 Y-2.892 E.07531 G3 X-41.13 Y-3.389 I1.625 J1.732 E.03167 G3 X-40.35 Y-4.78 I2.592 J.538 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.849 Y-4.183 G1 X-41.13 Y-3.389 G1 X-41.484 Y-3.252 ;WIPE_END G1 X-38.291 Y3.68 Z9.4 F30000 G1 X-15.232 Y53.745 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.745 E.287 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z9.4 F30000 G1 X-5.6 Y52.94 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42884 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.4885 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290602 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z9.4 F30000 G1 X-3.671 Y51.454 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.0316 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 M73 P69 R25 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z9.4 F30000 G1 X-2.945 Y22.045 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.86 Y17.193 Z9.4 F30000 G1 X18.632 Y-.894 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.00508 G3 X17.123 Y-4.866 I-.29 J-2.132 E.19684 G3 X18.088 Y-5.147 I1.053 J1.817 E.03368 G3 X18.757 Y-.921 I.103 J2.149 E.20866 G1 X18.671 Y-.903 E.00293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.552 Y-1.293 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.272 E.00419 G3 X17.327 Y-4.512 I-.235 J-1.727 E.15945 G3 X18.115 Y-4.741 I.854 J1.474 E.02748 G3 X18.651 Y-1.317 I.078 J1.742 E.16887 G1 X18.591 Y-1.303 E.00205 G1 X18.467 Y-1.72 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.703 E.00301 G3 X17.699 Y-4.211 I-.178 J-1.296 E.11621 G3 X18.143 Y-4.307 I.516 J1.311 E.01404 G3 X18.538 Y-1.737 I.05 J1.307 E.11708 G1 X18.506 Y-1.729 E.00102 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.703 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.941 Y-2.642 ;WIPE_END G1 X17.29 Y4.983 Z9.4 F30000 G1 X17.845 Y17.121 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.642 Y17.083 E.00686 G3 X17.123 Y13.134 I.549 J-2.081 E.16877 G3 X18.088 Y12.853 I1.053 J1.817 E.03368 G3 X17.919 Y17.137 I.103 J2.149 E.23672 G1 X17.884 Y17.13 E.00117 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.924 Y16.722 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.687 E.00597 G3 X17.327 Y13.488 I.445 J-1.686 E.13675 G3 X18.115 Y13.259 I.854 J1.474 E.02748 G3 X17.972 Y16.731 I.078 J1.742 E.19165 G1 X17.964 Y16.729 E.00028 G1 X18.009 Y16.294 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.698 Y16.213 E.0099 G3 X17.699 Y13.789 I.495 J-1.212 E.09518 G3 X18.143 Y13.693 I.516 J1.311 E.01404 G3 X18.048 Y16.302 I.05 J1.308 E.13236 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.698 Y16.213 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.901 Y15.171 G1 X16.89 Y15 G1 X16.896 Y14.903 ;WIPE_END G1 X16.055 Y7.317 Z9.4 F30000 G1 X14.502 Y-6.698 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.374 Y-4.498 Z9.4 F30000 G1 Z9 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X15.834 Y-2.995 I2 J1.567 E.05388 G2 X15.112 Y-2.339 I14.8 J17.017 E.03238 G1 X14.713 Y-2.191 E.01409 G1 X14.713 Y-4.733 E.08432 G2 X15.767 Y-5.205 I.045 J-1.313 E.03964 G1 X16.422 Y-5.803 E.02941 G3 X18.06 Y-5.843 I.857 J1.509 E.0566 G2 X18.812 Y-5.285 I1.487 J-1.22 E.03139 G3 X19.814 Y-4.724 I-1.02 J2.997 E.0383 G2 X21.008 Y-5.205 I.134 J-1.39 E.04437 G1 X21.337 Y-5.505 E.01477 G1 X21.337 Y-3.223 E.07569 G2 X20.499 Y-2.472 I20.233 J23.419 E.03732 G3 X19.643 Y-1.126 I-2.329 J-.535 E.05397 G1 X14.713 Y-1.12 F30000 G1 F16200 G1 X14.713 Y.508 E.05401 G2 X15.767 Y.036 I.045 J-1.313 E.03964 G1 X16.422 Y-.561 E.02941 G1 X17.077 Y-.804 E.02318 G3 X18.387 Y-.316 I.069 J1.819 E.04761 G1 X19.043 Y.282 E.02941 G2 X20.68 Y.322 I.857 J-1.509 E.0566 G2 X21.337 Y-.264 I-13.211 J-15.461 E.02919 G1 X21.337 Y2.018 E.07569 G2 X20.353 Y2.902 I22.641 J26.186 E.04389 G3 X18.715 Y2.943 I-.857 J-1.509 E.0566 G3 X17.732 Y2.059 I19.925 J-23.149 E.04384 G2 X16.094 Y2.019 I-.857 J1.509 E.0566 G2 X15.112 Y2.902 I19.924 J23.148 E.04384 G1 X14.713 Y3.05 E.01409 G1 X14.713 Y5.749 E.08954 G2 X15.767 Y5.278 I.045 J-1.313 E.03964 G1 X16.422 Y4.68 E.02941 G3 X18.06 Y4.639 I.857 J1.509 E.0566 G3 X19.043 Y5.523 I-19.926 J23.149 E.04384 G2 X20.68 Y5.564 I.857 J-1.509 E.0566 G2 X21.337 Y4.978 I-13.211 J-15.461 E.02919 G1 X21.337 Y7.259 E.07569 G2 X20.353 Y8.144 I22.641 J26.186 E.04389 G3 X18.715 Y8.184 I-.857 J-1.509 E.0566 G3 X17.732 Y7.301 I19.924 J-23.148 E.04384 G2 X16.094 Y7.26 I-.857 J1.509 E.0566 G2 X15.112 Y8.144 I19.924 J23.148 E.04384 G1 X14.713 Y8.291 E.01409 G1 X14.713 Y10.991 E.08954 G2 X15.767 Y10.519 I.045 J-1.313 E.03964 G1 X16.422 Y9.921 E.02941 G3 X18.06 Y9.881 I.857 J1.509 E.0566 G3 X19.043 Y10.764 I-19.926 J23.149 E.04384 G2 X20.68 Y10.805 I.857 J-1.509 E.0566 G2 X21.337 Y10.219 I-13.211 J-15.461 E.02919 G1 X21.337 Y12.501 E.07569 G2 X20.353 Y13.385 I22.642 J26.187 E.04389 G1 X20.029 Y13.505 E.01146 G2 X17.862 Y12.66 I-1.838 J1.512 E.08061 G1 X17.732 Y12.542 E.00582 G2 X16.094 Y12.501 I-.857 J1.509 E.0566 G2 X15.112 Y13.385 I19.925 J23.149 E.04384 G1 X14.713 Y13.532 E.01409 G1 X14.713 Y16.232 E.08954 G2 X15.767 Y15.76 I.045 J-1.313 E.03964 G1 X15.918 Y15.622 E.0068 G2 X20.228 Y16.214 I2.285 J-.653 E.18226 G2 X21.008 Y15.76 I-.243 J-1.315 E.03055 G1 X21.337 Y15.46 E.01477 G1 X21.337 Y17.742 E.07569 G2 X20.506 Y18.487 I20.128 J23.299 E.03703 G1 X18.509 Y18.487 E.06624 G3 X17.732 Y17.783 I15.87 J-18.297 E.03476 G2 X16.094 Y17.743 I-.857 J1.509 E.0566 G2 X15.264 Y18.487 I16.78 J19.547 E.03698 G1 X16.893 Y18.487 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X15.264 Y18.487 G1 X15.541 Y18.239 ;WIPE_END G1 X16.402 Y10.655 Z9.4 F30000 G1 X18.752 Y-10.052 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 M73 P69 R24 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z9.4 F30000 G1 X30.752 Y-52.052 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:9.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.6 I-1.134 J.442 P1 F30000 G1 X50 Y-1.738 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.29 Y-1.714 I.005 J1.739 E.00967 G1 X50.34 Y-1.709 E.00166 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.737 I-.662 J-1.609 E.20229 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.33 Y-2.119 I.006 J2.147 E.01099 G1 X50.42 Y-2.111 E.00299 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.144 I-.818 J-1.985 E.25005 G1 X49.974 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00081 G1 X50.373 Y-2.552 E.01151 G1 X50.505 Y-2.539 E.00409 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.934 Y-2.582 E.01355 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.373 Y-2.552 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.756 Y-1.892 ;WIPE_END G1 X51.038 Y.851 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X51.246 Y.516 E.01212 G1 X51.336 Y.131 E.01216 G1 X51.323 Y-.263 E.01211 G1 X51.183 Y-.635 E.0122 G1 X50.954 Y-.954 E.01207 G1 X50.642 Y-1.179 E.01182 G1 X50.218 Y-1.327 E.01379 G1 X49.737 Y-1.323 E.01479 G1 X49.366 Y-1.183 E.01218 G1 X49.046 Y-.954 E.01209 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.611 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.284 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.009 Y.879 E.01092 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.844 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440154 G1 F15000 G1 X49.8 Y.02 E.00497 G1 X49.873 Y.156 E.00498 G1 X50.02 Y.2 E.00498 G1 X50.156 Y.127 E.00498 G1 X50.2 Y.019 E.00379 G1 X50.153 Y-.13 E.00507 G1 X49.995 Y-.202 E.0056 G1 X49.88 Y-.145 E.00416 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.116 Y-.573 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.885 Y-.58 E.00711 G1 X49.626 Y-.454 E.00883 G1 X49.454 Y-.226 E.00878 G1 X49.415 Y.058 E.00881 G1 X49.509 Y.328 E.0088 G1 X49.723 Y.519 E.00881 G1 X50 Y.591 E.0088 G1 X50.278 Y.519 E.00881 G1 X50.491 Y.328 E.0088 G1 X50.585 Y.057 E.00882 G1 X50.546 Y-.226 E.00878 G1 X50.365 Y-.461 E.00911 G1 X50.152 Y-.557 E.00717 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.149 Y-.955 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.811 Y-.951 E.01039 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.186 Y-.941 E.01159 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.729 Y.616 ;WIPE_END G1 X43.947 Y-2.884 Z9.6 F30000 G1 X-51.352 Y-52.052 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z9.6 F30000 G1 X-39.352 Y-10.052 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01314 G1 X-39.758 Y-21.309 E.37342 G1 X-50.248 Y-21.309 E.34797 G1 F2400 G1 X-50.248 Y-21.794 E.01609 G1 F600 G1 X-50.248 Y-21.994 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-50.248 Y-22.784 E.02621 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-50.248 Y-22.984 E.00663 M106 S255 G1 F2400 G1 X-50.248 Y-23.469 E.01609 G1 F18000 G1 X-39.758 Y-23.469 E.34797 G1 X-39.748 Y-47.948 E.81201 G1 X-39.352 Y-47.948 E.01314 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-20.902 E.37342 G1 X-50.655 Y-20.902 E.34797 G1 F2400 G1 X-50.655 Y-21.794 E.02959 G1 F600 G1 X-50.655 Y-21.994 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-50.655 Y-22.784 E.02621 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-50.655 Y-22.984 E.00663 M106 S255 G1 F2400 G1 X-50.655 Y-23.876 E.02959 G1 F18000 G1 X-40.165 Y-23.876 E.34797 G1 X-40.155 Y-48.355 E.81201 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.591 Y-9.84 E.01936 G1 X-40.6 Y-19.989 E.31185 G1 X-40.6 Y-20.467 E.01469 G1 X-41.078 Y-20.467 E.01469 G1 X-50.46 Y-20.467 E.28828 G1 X-51.09 Y-20.467 E.01936 G1 F2400 G1 X-51.09 Y-21.794 E.04078 G1 F600 G1 X-51.09 Y-21.994 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-51.09 Y-22.784 E.02621 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-51.09 Y-22.984 E.00615 M106 S255 G1 F2400 G1 X-51.09 Y-24.311 E.04078 G1 F12000 G1 X-50.46 Y-24.311 E.01936 G1 X-41.078 Y-24.311 E.28828 G1 X-40.6 Y-24.311 E.01469 G1 X-40.6 Y-24.789 E.01469 G1 X-40.59 Y-48.16 E.71813 G1 X-40.59 Y-48.79 E.01936 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.043 Y-16.83 Z9.6 F30000 G1 X-39.744 Y-21.701 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-39.744 Y-23.077 E.04227 G1 X-41.634 Y-23.077 E.05806 G1 X-41.637 Y-21.701 E.04227 G1 X-39.784 Y-21.701 E.05692 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.182 Y-22.14 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.542251 G1 F15000 G1 X-40.182 Y-22.639 E.02032 G1 X-41.194 Y-22.639 E.04117 G1 X-41.193 Y-22.14 E.02032 G1 X-40.222 Y-22.14 E.03948 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.193 Y-22.14 G1 X-41.194 Y-22.639 G1 X-40.664 Y-22.639 ;WIPE_END G17 G3 Z9.6 I.108 J-1.212 P1 F30000 G1 X-49.705 Y-23.443 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 G1 F1500 G1 X-49.705 Y-21.505 E.05953 G1 X-49.328 Y-21.505 E.01159 G1 X-49.328 Y-23.273 E.05432 G1 X-48.951 Y-23.273 E.01159 G1 X-48.951 Y-21.505 E.05432 G1 X-48.573 Y-21.505 E.01159 G1 X-48.573 Y-23.273 E.05432 G1 X-48.196 Y-23.273 E.01159 G1 X-48.196 Y-21.505 E.05432 G1 X-47.819 Y-21.505 E.01159 G1 X-47.819 Y-23.273 E.05432 G1 X-47.442 Y-23.273 E.01159 G1 X-47.442 Y-21.505 E.05432 G1 X-47.065 Y-21.505 E.01159 G1 X-47.065 Y-23.273 E.05432 G1 X-46.688 Y-23.273 E.01159 G1 X-46.688 Y-21.505 E.05432 G1 X-46.311 Y-21.505 E.01159 G1 X-46.311 Y-23.273 E.05432 G1 X-45.934 Y-23.273 E.01159 G1 X-45.934 Y-21.505 E.05432 G1 X-45.557 Y-21.505 E.01159 G1 X-45.557 Y-23.273 E.05432 G1 X-45.18 Y-23.273 E.01159 G1 X-45.18 Y-21.505 E.05432 G1 X-44.803 Y-21.505 E.01159 G1 X-44.803 Y-23.273 E.05432 G1 X-44.426 Y-23.273 E.01159 G1 X-44.426 Y-21.505 E.05432 G1 X-44.049 Y-21.505 E.01159 G1 X-44.049 Y-23.273 E.05432 G1 X-43.671 Y-23.273 E.01159 G1 X-43.671 Y-21.505 E.05432 G1 X-43.294 Y-21.505 E.01159 G1 X-43.294 Y-23.273 E.05432 G1 X-42.917 Y-23.273 E.01159 G1 X-42.917 Y-21.505 E.05432 G1 X-42.54 Y-21.505 E.01159 G1 X-42.54 Y-23.273 E.05432 G1 X-42.163 Y-23.273 E.01159 G1 X-42.163 Y-21.336 E.05953 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X-42.163 Y-23.273 G1 X-42.226 Y-23.273 ;WIPE_END G1 X-40.688 Y-15.797 Z9.6 F30000 G1 X-37.678 Y-1.164 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 M106 S255 G1 X-37.725 Y-1.138 E.00177 G3 X-39.877 Y-4.866 I-1.084 J-1.859 E.22486 G3 X-38.908 Y-5.147 I1.054 J1.818 E.03382 G3 X-37.492 Y-1.296 I.099 J2.15 E.18053 G1 X-37.646 Y-1.187 E.00624 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.937 Y-1.491 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00733 G3 X-39.468 Y-4.613 I-.677 J-1.608 E.18244 G3 X-38.881 Y-4.741 I.686 J1.744 E.02002 G3 X-37.86 Y-1.535 I.071 J1.743 E.15086 G1 X-37.902 Y-1.511 E.00158 G1 X-38.141 Y-1.873 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.3 Y-1.792 E.00547 G3 X-39.301 Y-4.211 I-.507 J-1.207 E.12679 G3 X-38.853 Y-4.307 I.517 J1.314 E.01417 G3 X-38.102 Y-1.896 I.046 J1.308 E.10491 G1 X-38.106 Y-1.893 E.00017 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.3 Y-1.792 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.879 Y-2.261 ;WIPE_END G1 X-40.154 Y5.367 Z9.6 F30000 G1 X-40.547 Y16.255 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.662 Y16.075 E.0071 G3 X-38.908 Y12.853 I1.862 J-1.075 E.14578 G3 X-37.633 Y16.806 I.107 J2.147 E.1867 G3 X-40.505 Y16.309 I-1.167 J-1.806 E.10626 G1 X-40.522 Y16.287 E.00091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.208 Y16.029 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.319 Y15.877 E.00624 G3 X-39.468 Y13.387 I1.509 J-.875 E.0989 G3 X-38.881 Y13.259 I.686 J1.744 E.02002 G3 X-40.191 Y16.067 I.071 J1.743 E.23704 G1 X-40.192 Y16.066 E.00006 G1 X-39.845 Y15.788 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.015 Y15.503 E.0102 G3 X-39.301 Y13.789 I1.209 J-.502 E.06343 G3 X-38.853 Y13.693 I.517 J1.314 E.01417 G3 X-39.826 Y15.822 I.046 J1.308 E.16366 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.015 Y15.503 G1 X-40.099 Y15.171 G1 X-40.11 Y15 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.727 Y14.073 G1 X-39.657 Y14.02 ;WIPE_END G1 X-38.018 Y6.565 Z9.6 F30000 G1 X-35.102 Y-6.698 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-37.044 Y-1.422 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-36.441 Y-2.897 I-2.031 J-1.691 E.05373 G1 X-35.991 Y-3.258 E.01912 G1 X-35.313 Y-3.411 E.02306 G1 X-35.313 Y-6.031 E.08689 G1 X-35.991 Y-5.911 E.02284 G2 X-37.301 Y-4.883 I22.509 J30.06 E.05524 G2 X-39.267 Y-5.353 I-1.684 J2.698 E.06822 G2 X-41.232 Y-5.911 I-1.391 J1.161 E.072 G2 X-41.937 Y-5.369 I11.854 J16.153 E.02947 G1 X-41.937 Y-6.487 E.03707 G1 X-41.426 Y-6.487 E.01694 G1 X-40.435 Y-4.706 F30000 G1 F16200 G2 X-41.148 Y-3.279 I1.678 J1.729 E.05395 G1 X-41.232 Y-3.258 E.0029 G3 X-41.937 Y-2.695 I-13.047 J-15.599 E.02992 G1 X-41.937 Y-.128 E.08515 G3 X-41.232 Y-.669 I12.559 J15.611 E.02947 G3 X-39.267 Y-.112 I.574 J1.718 E.072 G1 X-38.612 Y.39 E.02738 G2 X-36.646 Y-.168 I.574 J-1.718 E.072 G1 X-35.991 Y-.669 E.02738 G1 X-35.313 Y-.79 E.02284 G1 X-35.313 Y1.83 E.08689 G1 X-35.991 Y1.983 E.02306 G3 X-37.301 Y3.01 I-23.82 J-29.034 E.05524 G3 X-39.267 Y2.453 I-.574 J-1.718 E.072 G1 X-39.922 Y1.951 E.02738 G2 X-41.888 Y2.509 I-.574 J1.718 E.072 G1 X-41.937 Y2.546 E.00206 G1 X-41.937 Y5.113 E.08515 G3 X-41.232 Y4.572 I12.559 J15.611 E.02947 G3 X-39.267 Y5.129 I.574 J1.718 E.072 G1 X-38.612 Y5.631 E.02738 G2 X-36.646 Y5.074 I.574 J-1.718 E.072 G1 X-35.991 Y4.572 E.02738 G1 X-35.313 Y4.452 E.02284 G1 X-35.313 Y7.071 E.08689 G1 X-35.991 Y7.225 E.02306 G3 X-37.301 Y8.252 I-23.819 J-29.033 E.05524 G3 X-39.267 Y7.694 I-.574 J-1.718 E.072 G1 X-39.922 Y7.193 E.02738 G2 X-41.888 Y7.75 I-.574 J1.718 E.072 G1 X-41.937 Y7.788 E.00206 G1 X-41.937 Y10.355 E.08515 G3 X-41.232 Y9.813 I12.559 J15.611 E.02947 G3 X-39.267 Y10.371 I.574 J1.718 E.072 G1 X-38.612 Y10.872 E.02738 G2 X-36.646 Y10.315 I.574 J-1.718 E.072 G1 X-35.991 Y9.813 E.02738 G1 X-35.313 Y9.693 E.02284 G1 X-35.313 Y12.312 E.08689 G1 X-35.991 Y12.466 E.02306 G3 X-37.11 Y13.346 I-20.418 J-24.792 E.04724 G3 X-36.478 Y15.427 I-1.845 J1.697 E.07462 G1 X-35.991 Y15.054 E.02034 G1 X-35.313 Y14.934 E.02284 G1 X-35.313 Y17.554 E.08689 G1 X-35.991 Y17.707 E.02306 G3 X-36.978 Y18.487 I-18.075 J-21.87 E.04173 G1 X-38.881 Y18.487 E.0631 G2 X-39.922 Y17.675 I-18.826 J23.081 E.04381 G2 X-41.888 Y18.232 I-.574 J1.718 E.072 G1 X-41.937 Y18.27 E.00206 G1 X-41.937 Y18.487 E.00719 G1 X-40.525 Y18.487 E.04683 G1 X-40.596 Y16.532 F30000 G1 F16200 G3 X-41.163 Y15.041 I2.096 J-1.65 E.05373 G1 X-41.232 Y15.054 E.00234 G2 X-41.937 Y15.596 I11.854 J16.153 E.02947 G1 X-41.937 Y13.029 E.08515 G2 X-41.232 Y12.466 I-12.342 J-16.161 E.02992 G3 X-39.511 Y12.748 I.666 J1.326 E.06184 G2 X-40.78 Y13.714 I.892 J2.488 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-40.24 Y13.123 G1 X-39.511 Y12.748 G1 X-39.813 Y12.517 ;WIPE_END G1 X-35.904 Y19.073 Z9.6 F30000 G1 X-15.232 Y53.745 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.745 E.28698 G3 X-15.232 Y52.255 I-.273 J1.954 E.06749 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z9.6 F30000 G1 X-5.6 Y52.94 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.255 J1.928 E.27022 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42901 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.672 J.79 E.48869 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48849 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290582 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y52.899 F30000 ;TYPE:Gap infill ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y52.95 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y52.899 F30000 G1 F12000 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-3.727 Y52.621 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z9.6 F30000 G1 X-2.945 Y22.045 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.86 Y17.193 Z9.6 F30000 G1 X18.626 Y-.893 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.0049 G3 X18.092 Y-5.147 I-.283 J-2.133 E.23013 G3 X20.315 Y-3.387 I.107 J2.148 E.10268 G3 X18.757 Y-.92 I-2.116 J.389 E.10635 G1 X18.665 Y-.901 E.00312 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.547 Y-1.292 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.269 E.00401 G3 X18.119 Y-4.741 I-.229 J-1.729 E.18676 G3 X19.916 Y-3.308 I.08 J1.742 E.08324 G3 X18.652 Y-1.314 I-1.717 J.309 E.08601 G1 X18.586 Y-1.3 E.00224 G1 X18.462 Y-1.719 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.702 E.00284 G3 X17.699 Y-4.211 I-.178 J-1.297 E.11626 G3 X18.147 Y-4.307 I.517 J1.314 E.01417 G3 X18.539 Y-1.736 I.046 J1.308 E.11705 G1 X18.501 Y-1.727 E.00119 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.702 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.94 Y-2.647 ;WIPE_END G1 X17.282 Y4.978 Z9.6 F30000 G1 X17.825 Y17.117 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.642 Y17.083 E.00619 G3 X17.123 Y13.134 I.549 J-2.081 E.16876 G3 X18.092 Y12.853 I1.054 J1.818 E.03382 G3 X17.919 Y17.137 I.099 J2.15 E.2366 G1 X17.865 Y17.126 E.00184 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.905 Y16.718 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.747 Y16.689 E.00531 G3 X17.532 Y13.387 I.443 J-1.687 E.14454 G3 X18.119 Y13.259 I.686 J1.744 E.02002 G3 X17.972 Y16.733 I.071 J1.743 E.19143 G1 X17.944 Y16.727 E.00095 G1 X17.991 Y16.289 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.698 Y16.213 E.00932 G3 X17.699 Y13.789 I.496 J-1.212 E.09516 G3 X18.147 Y13.693 I.517 J1.314 E.01417 G3 X18.03 Y16.3 I.046 J1.308 E.13283 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.698 Y16.213 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.89 Y15 G1 X16.905 Y14.885 ;WIPE_END G1 X16.06 Y7.299 Z9.6 F30000 G1 X14.502 Y-6.698 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.416 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.788 E.05401 G1 X15.112 Y-4.883 E.01359 G1 X15.767 Y-5.409 E.02786 G3 X17.732 Y-5.879 I1.313 J1.148 E.0715 G1 X18.387 Y-5.353 E.02786 G3 X19.788 Y-4.747 I-.188 J2.357 E.05154 G1 X20.353 Y-4.883 E.01928 G3 X21.337 Y-5.661 I18.02 J21.8 E.0416 G1 X21.337 Y-6.487 E.0274 G1 X20.535 Y-6.487 E.02661 G1 X16.258 Y-4.343 F30000 G1 F16200 G2 X15.854 Y-2.802 I2.158 J1.39 E.05372 G3 X15.112 Y-2.231 I-13.261 J-16.448 E.03108 G1 X14.713 Y-2.154 E.01346 G1 X14.713 Y.454 E.08652 G1 X15.112 Y.358 E.01359 G1 X15.767 Y-.168 E.02786 G3 X17.732 Y-.637 I1.313 J1.148 E.0715 G1 X18.387 Y-.112 E.02786 G2 X20.353 Y.358 I1.313 J-1.148 E.0715 G3 X21.337 Y-.42 I18.02 J21.801 E.0416 G1 X21.337 Y-2.996 E.08548 G3 X20.449 Y-2.305 I-16.041 J-19.668 E.03733 G3 X19.498 Y-1.028 I-2.436 J-.822 E.05369 G1 X14.713 Y1.459 F30000 G1 F16200 G1 X14.713 Y3.087 E.05401 G1 X15.112 Y3.01 E.01346 G1 X15.767 Y2.509 E.02738 G3 X17.732 Y1.951 I1.391 J1.161 E.072 G1 X18.387 Y2.453 E.02738 G2 X20.353 Y3.01 I1.391 J-1.161 E.072 G2 X21.337 Y2.245 I-16.773 J-22.572 E.04136 G1 X21.337 Y4.822 E.08548 G1 X21.008 Y5.074 E.01374 G3 X19.043 Y5.631 I-1.391 J-1.161 E.072 G1 X18.387 Y5.129 E.02738 G2 X16.422 Y4.572 I-1.391 J1.161 E.072 G2 X15.112 Y5.599 I22.51 J30.061 E.05524 G1 X14.713 Y5.695 E.01359 G1 X14.713 Y8.328 E.08735 G1 X15.112 Y8.252 E.01346 G1 X15.767 Y7.75 E.02738 G3 X17.732 Y7.193 I1.391 J1.161 E.072 G1 X18.387 Y7.694 E.02738 G2 X20.353 Y8.252 I1.391 J-1.161 E.072 G2 X21.337 Y7.486 I-16.773 J-22.572 E.04136 G1 X21.337 Y10.063 E.08548 G1 X21.008 Y10.315 E.01374 G3 X19.043 Y10.872 I-1.391 J-1.161 E.072 G1 X18.387 Y10.371 E.02738 G2 X16.422 Y9.813 I-1.391 J1.161 E.072 G2 X15.112 Y10.84 I22.51 J30.061 E.05524 G1 X14.713 Y10.936 E.01359 G1 X14.713 Y12.565 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.713 Y10.936 G1 X15.074 Y10.849 ;WIPE_END G1 X19.118 Y17.18 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 G1 F16200 G2 X20.249 Y16.183 I-.979 J-2.251 E.05083 G3 X21.337 Y15.304 I6.225 J6.597 E.04643 G1 X21.337 Y12.727 E.08548 G3 X20.353 Y13.493 I-17.757 J-21.807 E.04136 G1 X20.067 Y13.548 E.00967 G2 X18.01 Y12.647 I-1.924 J1.594 E.07725 G2 X16.422 Y12.466 I-.931 J1.11 E.05616 G3 X15.112 Y13.493 I-23.819 J-29.033 E.05524 G1 X14.713 Y13.57 E.01346 G1 X14.713 Y16.178 E.08652 G1 X15.112 Y16.082 E.01359 G3 X15.886 Y15.465 I14.285 J17.143 E.03283 G2 X16.708 Y16.832 I2.571 J-.617 E.05376 G1 X17.063 Y18.487 F30000 G1 F16200 G1 X15.435 Y18.487 E.05401 G1 X15.767 Y18.232 E.01388 G3 X17.732 Y17.675 I1.391 J1.161 E.072 G3 X18.774 Y18.487 I-17.784 J23.893 E.04381 G1 X20.676 Y18.487 E.0631 G2 X21.337 Y17.969 I-11.352 J-15.162 E.02786 G1 X21.337 Y16.34 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X21.337 Y17.969 G1 X21.044 Y18.198 ;WIPE_END G1 X20.427 Y10.591 Z9.6 F30000 G1 X18.752 Y-10.052 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z9.6 F30000 G1 X30.752 Y-52.052 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:9.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.8 I-1.134 J.442 P1 F30000 G1 X50 Y-1.738 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.287 Y-1.715 I.005 J1.739 E.00956 G1 X50.34 Y-1.709 E.00177 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.737 I-.662 J-1.608 E.20229 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.327 Y-2.12 I.006 J2.147 E.01088 G1 X50.42 Y-2.111 E.0031 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.143 I-.818 J-1.985 E.25005 G1 X49.98 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00062 G1 X50.369 Y-2.553 E.0114 G1 X50.505 Y-2.539 E.00419 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.94 Y-2.583 E.01374 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.369 Y-2.553 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.761 Y-1.888 ;WIPE_END G1 X50.205 Y.017 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.431226 G1 F15000 G1 X50.15 Y-.141 E.0053 G1 X49.921 Y-.191 E.00743 G1 X49.809 Y-.079 E.005 G1 X49.809 Y.079 E.005 G1 X49.921 Y.191 E.005 G1 X50.079 Y.191 E.005 G1 X50.196 Y.056 E.00564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.186 Y-.54 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.859 Y-.572 E.01011 G1 X49.623 Y-.452 E.00813 G1 X49.454 Y-.226 E.00866 G1 X49.415 Y.059 E.00885 G1 X49.509 Y.328 E.00876 G1 X49.724 Y.519 E.00884 G1 X50 Y.591 E.00877 G1 X50.278 Y.518 E.00884 G1 X50.491 Y.328 E.00877 G1 X50.586 Y.055 E.00889 G1 X50.546 Y-.226 E.00872 G1 X50.384 Y-.446 E.0084 G1 X50.222 Y-.522 E.00548 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.219 Y-.918 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.875 Y-.958 E.01063 G1 X49.538 Y-.848 E.01088 G1 X49.314 Y-.686 E.00849 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G2 X50.951 Y-.189 I-1.017 J-.383 E.0175 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.256 Y-.905 E.00919 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.334 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.991 Y-1.348 E.01078 G1 X49.597 Y-1.281 E.01225 G1 X49.251 Y-1.122 E.01173 G1 X48.96 Y-.849 E.01225 G1 X48.754 Y-.516 E.01203 G1 X48.664 Y-.13 E.01219 G1 X48.677 Y.263 E.01208 G1 X48.817 Y.634 E.01218 G1 X49.046 Y.954 E.0121 G1 X49.368 Y1.184 E.01217 G1 X49.737 Y1.323 E.0121 G1 X50.133 Y1.336 E.01217 G1 X50.516 Y1.246 E.0121 G1 X50.853 Y1.037 E.01218 G1 X51.122 Y.749 E.01209 G1 X51.285 Y.388 E.0122 G1 X51.336 Y.129 E.0081 G1 X51.323 Y-.263 E.01205 G1 X51.18 Y-.64 E.01237 G1 X50.954 Y-.954 E.0119 G1 X50.66 Y-1.169 E.01119 G1 X50.372 Y-1.266 E.00934 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.66 Y-1.169 G1 X50.954 Y-.954 G1 X51.18 Y-.64 G1 X51.323 Y-.263 G1 X51.336 Y.129 G1 X51.307 Y.276 ;WIPE_END G1 X44.507 Y-3.19 Z9.8 F30000 G1 X-51.352 Y-52.052 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z9.8 F30000 G1 X-39.352 Y-10.052 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.432 E.37749 G1 X-50.248 Y-21.432 E.34797 G1 X-50.248 Y-23.347 E.06352 G1 X-39.758 Y-23.347 E.34797 G1 X-39.748 Y-47.948 E.81607 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.025 E.37749 G1 X-50.655 Y-21.025 E.34797 G1 X-50.655 Y-23.754 E.09052 G1 X-40.165 Y-23.754 E.34797 G1 X-40.155 Y-48.355 E.81607 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.59 E.34967 G1 X-51.09 Y-20.59 E.32233 G1 X-51.09 Y-24.189 E.11059 G1 X-40.6 Y-24.189 E.32233 G1 X-40.59 Y-48.79 E.75593 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.047 Y-16.83 Z9.8 F30000 G1 X-39.744 Y-21.824 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-39.744 Y-22.955 E.03474 G1 X-49.856 Y-22.955 E.3107 G1 X-49.856 Y-21.824 E.03474 G1 X-39.784 Y-21.824 E.30947 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.121 Y-22.201 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419693 G1 F15000 G1 X-40.121 Y-22.578 E.01157 G1 X-49.479 Y-22.578 E.28731 G1 X-49.479 Y-22.201 E.01157 G1 X-40.161 Y-22.201 E.28608 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-42.161 Y-22.201 ;WIPE_END G1 X-40.605 Y-14.729 Z9.8 F30000 G1 X-37.768 Y-1.112 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.977 Y-1.014 E.00766 G3 X-38.904 Y-5.148 I-.823 J-1.986 E.2486 G3 X-36.699 Y-2.544 I.103 J2.148 E.13069 G3 X-37.725 Y-1.138 I-2.101 J-.456 E.05945 G1 X-37.734 Y-1.133 E.00035 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.948 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.391 E.00678 G3 X-39.468 Y-4.613 I-.676 J-1.608 E.18239 G3 X-38.877 Y-4.741 I.687 J1.746 E.02015 G3 X-37.916 Y-1.5 I.068 J1.743 E.15289 G1 X-38.147 Y-1.87 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.139 Y-4.266 I-.663 J-1.129 E.13751 G3 X-38.849 Y-4.307 I.303 J1.083 E.00904 G3 X-38.113 Y-1.89 I.038 J1.309 E.10498 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.268 ;WIPE_END G1 X-40.157 Y5.36 Z9.8 F30000 G1 X-40.547 Y16.255 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.671 Y16.08 E.00712 G3 X-39.877 Y13.134 I1.863 J-1.078 E.1125 G3 X-38.904 Y12.852 I1.054 J1.819 E.03395 G3 X-40.514 Y16.315 I.095 J2.15 E.2927 G1 X-40.528 Y16.29 E.00094 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.208 Y16.029 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.319 Y15.877 E.00624 G3 X-39.468 Y13.387 I1.509 J-.875 E.09889 G3 X-38.877 Y13.259 I.687 J1.746 E.02015 G3 X-40.191 Y16.067 I.068 J1.743 E.23693 G1 X-40.192 Y16.065 E.00007 G1 X-39.847 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.941 Y15.659 E.0049 G3 X-39.139 Y13.734 I1.131 J-.658 E.07414 G3 X-38.849 Y13.693 I.303 J1.082 E.00904 G3 X-39.83 Y15.822 I.038 J1.308 E.16343 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.941 Y15.659 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.655 Y14.017 ;WIPE_END G1 X-38.016 Y6.563 Z9.8 F30000 G1 X-35.102 Y-6.698 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.225 Y-6.487 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-6.487 E.02361 G1 X-41.937 Y-5.57 E.0304 G3 X-41.56 Y-5.899 I3.052 J3.118 E.0166 G3 X-39.413 Y-5.285 I.703 J1.603 E.08034 G3 X-37.617 Y-5.049 I.591 J2.449 E.06146 G2 X-37.301 Y-4.986 I.178 J-.073 E.01263 G3 X-35.991 Y-6.043 I2.903 J2.259 E.05634 G1 X-35.313 Y-6.042 E.02249 G1 X-35.313 Y-3.431 E.08662 G2 X-36.453 Y-2.71 I.332 J1.786 E.04585 G3 X-41.153 Y-3.188 I-2.345 J-.292 E.24272 G2 X-41.937 Y-2.481 I6.616 J8.118 E.03502 G1 X-41.937 Y-.329 E.0714 G3 X-41.56 Y-.658 I3.053 J3.118 E.0166 G3 X-39.922 Y-.534 I.704 J1.587 E.05675 G2 X-38.939 Y.378 I8.442 J-8.105 E.04451 G2 X-37.301 Y.255 I.704 J-1.587 E.05675 G3 X-35.991 Y-.802 I2.903 J2.259 E.05634 G1 X-35.313 Y-.801 E.02249 G1 X-35.313 Y1.81 E.08662 G1 X-35.991 Y2.086 E.02428 G3 X-36.974 Y2.999 I-8.442 J-8.105 E.04451 G3 X-38.612 Y2.876 I-.704 J-1.587 E.05675 G2 X-39.595 Y1.963 I-8.442 J8.105 E.04451 G2 X-41.232 Y2.086 I-.704 J1.587 E.05675 G3 X-41.937 Y2.76 I-6.221 J-5.799 E.03235 G1 X-41.937 Y4.912 E.0714 G3 X-41.56 Y4.583 I3.053 J3.118 E.0166 G3 X-39.922 Y4.707 I.704 J1.587 E.05675 G2 X-38.939 Y5.62 I8.442 J-8.105 E.04451 G2 X-37.301 Y5.496 I.704 J-1.587 E.05675 G3 X-35.991 Y4.439 I2.903 J2.259 E.05634 G1 X-35.313 Y4.44 E.02249 G1 X-35.313 Y7.052 E.08662 G1 X-35.991 Y7.327 E.02428 G3 X-36.974 Y8.24 I-8.442 J-8.105 E.04451 G3 X-38.612 Y8.117 I-.704 J-1.587 E.05675 G2 X-39.595 Y7.204 I-8.442 J8.105 E.04451 G2 X-41.232 Y7.327 I-.704 J1.587 E.05675 G3 X-41.937 Y8.001 I-6.22 J-5.799 E.03235 G1 X-41.937 Y10.154 E.0714 G3 X-41.56 Y9.825 I3.053 J3.118 E.0166 G3 X-39.922 Y9.948 I.704 J1.587 E.05675 G2 X-38.939 Y10.861 I8.442 J-8.105 E.04451 G2 X-37.301 Y10.737 I.704 J-1.587 E.05675 G3 X-35.991 Y9.681 I2.903 J2.259 E.05634 G1 X-35.313 Y9.682 E.02249 G1 X-35.313 Y12.293 E.08662 M73 P70 R24 G1 X-35.991 Y12.569 E.02428 G3 X-36.987 Y13.487 I-7.643 J-7.287 E.04496 G3 X-36.446 Y15.175 I-1.819 J1.514 E.06027 G3 X-35.991 Y14.922 I.643 J.62 E.01751 G1 X-35.313 Y14.923 E.02249 G1 X-35.313 Y17.534 E.08662 G1 X-35.991 Y17.81 E.02428 G3 X-36.699 Y18.487 I-6.249 J-5.829 E.03251 G1 X-38.729 Y18.487 E.06732 G2 X-39.595 Y17.687 I-7.404 J7.144 E.03913 G2 X-41.232 Y17.81 I-.704 J1.587 E.05675 G3 X-41.937 Y18.484 I-6.22 J-5.799 E.03235 G1 X-40.312 Y18.487 E.05391 G1 X-40.675 Y16.442 F30000 G1 F16200 G1 X-40.677 Y16.44 E.00008 G3 X-41.161 Y14.921 I2.225 J-1.545 E.05368 G2 X-41.937 Y15.395 I.595 J1.847 E.03045 G1 X-41.937 Y13.242 E.0714 G2 X-41.232 Y12.569 I-5.516 J-6.473 E.03235 G3 X-39.595 Y12.445 I.934 J1.464 E.05675 G1 X-39.306 Y12.694 E.01263 G2 X-40.659 Y13.539 I.678 J2.59 E.05374 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.983 Y12.951 G1 X-39.306 Y12.694 G1 X-39.594 Y12.446 ;WIPE_END G1 X-35.716 Y19.02 Z9.8 F30000 G1 X-15.232 Y53.745 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.746 E.28697 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z9.8 F30000 G1 X-5.6 Y52.94 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42881 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-19.495 Y51.705 I-2.67 J-.791 E.28559 G3 X-14.359 Y52.21 I2.465 J1.298 E.20277 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290581 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01244 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z9.8 F30000 G1 X-3.671 Y51.454 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.171 Y54.499 E.01237 G1 X-2.794 Y54.344 E.01252 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.601 E.01237 G1 X-2.226 Y52.224 E.01252 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.67 Y53.778 E.0095 G1 X-3.367 Y53.764 E.00933 G1 X-3.092 Y53.622 E.00952 G1 X-2.885 Y53.395 E.00942 G1 X-2.792 Y53.101 E.00948 G1 X-2.792 Y52.898 E.00624 G1 X-2.885 Y52.604 E.00948 G1 X-3.093 Y52.378 E.00945 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.465 Y53.397 E.00648 G1 X-3.28 Y53.29 E.00657 G1 X-3.173 Y53.106 E.00653 G1 X-3.166 Y52.947 E.00488 G1 X-3.247 Y52.752 E.00651 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.166 Y52.947 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.465 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z9.8 F30000 G1 X-2.945 Y22.045 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.859 Y17.192 Z9.8 F30000 G1 X18.621 Y-.892 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.00471 G3 X18.096 Y-5.148 I-.283 J-2.133 E.23027 G3 X20.316 Y-3.383 I.103 J2.149 E.10268 G3 X18.757 Y-.92 I-2.117 J.385 E.10621 G1 X18.66 Y-.9 E.0033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.541 Y-1.291 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.27 E.00383 G3 X17.532 Y-4.613 I-.237 J-1.728 E.16728 G3 X18.123 Y-4.741 I.687 J1.746 E.02015 G3 X18.651 Y-1.316 I.068 J1.743 E.16857 G1 X18.58 Y-1.3 E.00242 G1 X18.456 Y-1.718 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.702 E.00267 G3 X17.861 Y-4.266 I-.181 J-1.297 E.12173 G3 X18.151 Y-4.307 I.303 J1.083 E.00904 G3 X18.538 Y-1.737 I.038 J1.309 E.11672 G1 X18.495 Y-1.727 E.00136 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.702 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X17.065 Y-2.345 G1 X16.989 Y-2.499 G1 X16.946 Y-2.654 ;WIPE_END G1 X17.278 Y4.971 Z9.8 F30000 G1 X17.807 Y17.114 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.642 Y17.083 E.00557 G3 X17.123 Y13.134 I.549 J-2.081 E.16875 G3 X18.096 Y12.852 I1.054 J1.819 E.03395 G3 X17.919 Y17.137 I.095 J2.15 E.23648 G1 X17.846 Y17.122 E.00246 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.886 Y16.714 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.747 Y16.689 E.00468 G3 X17.532 Y13.387 I.443 J-1.687 E.14453 G3 X18.123 Y13.259 I.687 J1.746 E.02015 G3 X17.972 Y16.733 I.068 J1.743 E.19131 G1 X17.925 Y16.723 E.00158 G1 X17.971 Y16.288 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.86 Y16.268 E.00346 G3 X17.861 Y13.734 I.329 J-1.267 E.10588 G3 X18.151 Y13.693 I.303 J1.082 E.00904 G3 X18.029 Y16.3 I.038 J1.308 E.13248 G1 X18.01 Y16.296 E.00058 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.86 Y16.268 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.864 ;WIPE_END G1 X16.057 Y7.279 Z9.8 F30000 G1 X14.502 Y-6.698 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.447 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.818 E.05401 G1 X15.112 Y-4.986 E.01434 G3 X16.094 Y-5.899 I8.442 J8.105 E.04451 G3 X18.167 Y-5.357 I.709 J1.523 E.07708 G3 X19.787 Y-4.748 I-.036 J2.558 E.05856 G1 X20.353 Y-4.986 E.02036 G3 X21.337 Y-5.9 I9.947 J9.731 E.04455 G1 X21.337 Y-6.487 E.01948 G1 X20.296 Y-6.487 E.03454 G1 X16.159 Y-4.194 F30000 G1 F16200 G2 X15.871 Y-2.625 I2.374 J1.246 E.05375 G1 X15.767 Y-2.524 E.00483 G3 X14.713 Y-2.093 I-.934 J-.78 E.03929 G1 X14.713 Y.423 E.08346 G1 X15.112 Y.255 E.01434 G3 X16.094 Y-.658 I8.442 J8.105 E.04451 G3 X17.732 Y-.534 I.704 J1.587 E.05675 G2 X18.715 Y.378 I8.442 J-8.105 E.04451 G2 X20.353 Y.255 I.704 J-1.587 E.05675 G3 X21.337 Y-.658 I9.948 J9.732 E.04455 G1 X21.337 Y-2.841 E.07239 G3 X20.393 Y-2.116 I-2.137 J-1.807 E.03978 G3 X19.326 Y-.932 I-2.167 J-.881 E.05394 G1 X14.713 Y1.52 F30000 G1 F16200 G1 X14.713 Y3.148 E.05401 G1 X15.112 Y3.143 E.01322 G2 X16.422 Y2.086 I-1.593 J-3.316 E.05634 G3 X17.732 Y1.819 I.961 J1.363 E.04565 G3 X19.043 Y2.876 I-1.593 J3.316 E.05634 G2 X20.353 Y3.143 I.961 J-1.363 E.04565 G2 X21.337 Y2.401 I-1.141 J-2.536 E.04123 G1 X21.337 Y4.583 E.07239 G2 X20.353 Y5.496 I8.963 J10.644 E.04455 G3 X19.043 Y5.764 I-.961 J-1.363 E.04565 G3 X17.732 Y4.707 I1.593 J-3.316 E.05634 G2 X16.422 Y4.439 I-.961 J1.363 E.04565 G2 X15.112 Y5.496 I1.593 J3.316 E.05634 G1 X14.713 Y5.664 E.01434 G1 X14.713 Y8.39 E.09041 G1 X15.112 Y8.384 E.01322 G2 X16.422 Y7.327 I-1.593 J-3.316 E.05634 G3 X17.732 Y7.06 I.961 J1.363 E.04565 G3 X19.043 Y8.117 I-1.593 J3.316 E.05634 G2 X20.353 Y8.384 I.961 J-1.363 E.04565 G2 X21.337 Y7.642 I-1.141 J-2.536 E.04123 G1 X21.337 Y9.824 E.07239 G2 X20.353 Y10.737 I8.963 J10.644 E.04455 G3 X19.043 Y11.005 I-.961 J-1.363 E.04565 G3 X17.732 Y9.948 I1.593 J-3.316 E.05634 G2 X16.422 Y9.681 I-.961 J1.363 E.04565 G2 X15.112 Y10.737 I1.593 J3.316 E.05634 G1 X14.713 Y10.905 E.01434 G1 X14.713 Y12.534 E.05401 G1 X16.215 Y13.721 F30000 G1 F16200 G2 X15.852 Y15.274 I2.301 J1.357 E.05373 G2 X15.112 Y15.979 I5.769 J6.804 E.03393 G1 X14.713 Y16.147 E.01434 G1 X14.713 Y13.631 E.08346 G2 X15.767 Y13.2 I.12 J-1.211 E.03929 G1 X16.422 Y12.569 E.03018 G3 X18.06 Y12.445 I.934 J1.464 E.05675 G2 X18.812 Y12.715 I.706 J-.787 E.02719 G3 X20.123 Y13.629 I-.822 J2.575 E.0538 G2 X21.008 Y13.2 I-.019 J-1.167 E.03367 G1 X21.337 Y12.883 E.01515 G1 X21.337 Y15.065 E.07239 G3 X20.349 Y15.981 I-288.079 J-310.126 E.04468 G3 X19.232 Y17.118 I-2.323 J-1.163 E.05373 G1 X21.337 Y16.496 F30000 G1 F16200 G1 X21.337 Y18.125 E.05401 G3 X20.955 Y18.487 I-3.347 J-3.144 E.01747 G1 X18.926 Y18.487 E.06732 G2 X17.732 Y17.543 I-2.622 J2.088 E.05093 G2 X16.422 Y17.81 I-.35 J1.631 E.04565 G3 X15.714 Y18.487 I-6.249 J-5.829 E.03251 G1 X14.713 Y18.487 E.03319 G1 X14.713 Y17.859 E.02082 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.713 Y18.487 G1 X15.714 Y18.487 G1 X15.982 Y18.23 ;WIPE_END G1 X16.726 Y10.634 Z9.8 F30000 G1 X18.752 Y-10.052 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z9.8 F30000 G1 X30.752 Y-52.052 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:9.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;9.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10 I-1.134 J.442 P1 F30000 G1 X50 Y-1.737 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.283 Y-1.715 I.005 J1.739 E.00944 G1 X50.34 Y-1.709 E.00189 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.737 I-.662 J-1.608 E.20228 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.323 Y-2.12 I.006 J2.147 E.01076 G1 X50.42 Y-2.111 E.00322 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.143 I-.818 J-1.985 E.25005 G1 X49.985 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00045 G1 X50.366 Y-2.553 E.0113 G1 X50.505 Y-2.539 E.00429 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.946 Y-2.584 E.01391 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.366 Y-2.553 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.765 Y-1.885 ;WIPE_END G1 X50.205 Y.017 Z10 F30000 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.431215 G1 F15000 G1 X50.15 Y-.141 E.0053 G1 X49.921 Y-.191 E.00742 G1 X49.809 Y-.079 E.005 G1 X49.809 Y.079 E.005 G1 X49.921 Y.191 E.005 G1 X50.079 Y.191 E.005 G1 X50.196 Y.056 E.00564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.186 Y-.54 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.859 Y-.572 E.01012 G1 X49.623 Y-.452 E.00813 G1 X49.454 Y-.226 E.00866 G1 X49.415 Y.059 E.00885 G1 X49.509 Y.328 E.00876 G1 X49.724 Y.519 E.00884 G1 X50 Y.591 E.00877 G1 X50.278 Y.518 E.00884 G1 X50.491 Y.328 E.00877 G1 X50.586 Y.055 E.00889 G1 X50.546 Y-.226 E.00872 G1 X50.384 Y-.446 E.0084 G1 X50.223 Y-.522 E.00548 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.219 Y-.918 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.875 Y-.958 E.01064 G1 X49.538 Y-.848 E.01088 G1 X49.314 Y-.686 E.00849 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G2 X50.951 Y-.189 I-1.017 J-.383 E.0175 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.256 Y-.905 E.00919 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.335 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.991 Y-1.348 E.01078 G1 X49.597 Y-1.281 E.01225 G1 X49.251 Y-1.122 E.01173 G1 X48.96 Y-.849 E.01225 G1 X48.754 Y-.516 E.01203 G1 X48.664 Y-.13 E.01219 G1 X48.677 Y.263 E.01208 G1 X48.817 Y.634 E.01218 G1 X49.046 Y.954 E.0121 G1 X49.368 Y1.184 E.01217 G1 X49.737 Y1.323 E.0121 G1 X50.133 Y1.336 E.01217 G1 X50.516 Y1.246 E.0121 G1 X50.853 Y1.037 E.01218 G1 X51.122 Y.749 E.01209 G1 X51.285 Y.388 E.0122 G1 X51.336 Y.129 E.0081 G1 X51.323 Y-.263 E.01205 G1 X51.18 Y-.64 E.01237 G1 X50.954 Y-.954 E.0119 G1 X50.66 Y-1.169 E.01118 G1 X50.372 Y-1.266 E.00934 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.66 Y-1.169 G1 X50.954 Y-.954 G1 X51.18 Y-.64 G1 X51.323 Y-.263 G1 X51.336 Y.129 G1 X51.307 Y.276 ;WIPE_END G1 X48.517 Y-6.828 Z10 F30000 G1 X30.752 Y-52.052 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z10 F30000 G1 X18.752 Y-10.052 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 M73 P70 R23 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.44 Y-3.593 Z10 F30000 G1 X18.615 Y-.891 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.869 E.00453 G3 X16.084 Y-2.621 I-.281 J-2.132 E.10872 G3 X18.1 Y-5.148 I2.107 J-.387 E.12153 G3 X20.316 Y-3.379 I.099 J2.149 E.10269 G3 X18.756 Y-.924 I-2.117 J.379 E.10599 G1 X18.654 Y-.9 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.536 Y-1.29 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.427 Y-1.272 E.00364 G3 X16.483 Y-2.7 I-.228 J-1.728 E.08839 G3 X18.127 Y-4.742 I1.718 J-.299 E.09838 G3 X19.917 Y-3.3 I.072 J1.743 E.08324 G3 X18.651 Y-1.317 I-1.717 J.299 E.08566 G1 X18.575 Y-1.299 E.0026 G1 X18.451 Y-1.717 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.703 E.0025 G3 X17.861 Y-4.266 I-.18 J-1.296 E.12165 G3 X18.156 Y-4.308 I.306 J1.098 E.00917 G3 X18.538 Y-1.738 I.035 J1.308 E.1166 G1 X18.49 Y-1.726 E.00153 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.703 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.935 Y-2.657 ;WIPE_END G1 X17.263 Y4.968 Z10 F30000 G1 X17.785 Y17.109 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.643 Y17.078 E.00483 G3 X18.1 Y12.852 I.556 J-2.078 E.20219 G3 X19.965 Y16.229 I.106 J2.144 E.15892 G3 X17.919 Y17.133 I-1.766 J-1.228 E.07801 G1 X17.825 Y17.116 E.00318 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.865 Y16.71 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.747 Y16.689 E.00396 G3 X17.532 Y13.387 I.443 J-1.687 E.14451 G3 X18.127 Y13.258 I.688 J1.749 E.02029 G3 X17.972 Y16.733 I.064 J1.743 E.19121 G1 X17.904 Y16.718 E.0023 G1 X17.95 Y16.283 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.86 Y16.267 E.00279 G3 X17.861 Y13.734 I.33 J-1.266 E.10585 G3 X18.156 Y13.692 I.306 J1.098 E.00917 G3 X18.029 Y16.3 I.035 J1.308 E.13239 G1 X17.989 Y16.291 E.00125 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.86 Y16.267 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.273 Y15.927 G1 X17.09 Y15.692 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.843 ;WIPE_END G1 X16.056 Y7.257 Z10 F30000 G1 X14.502 Y-6.698 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.456 Z10 F30000 G1 Z9.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.828 E.05401 G1 X15.112 Y-5.075 E.01555 G1 X15.767 Y-5.88 E.03444 G1 X16.094 Y-6.14 E.01388 G3 X17.732 Y-5.688 I.363 J1.876 E.05842 G1 X18.004 Y-5.353 E.01431 G3 X19.803 Y-4.734 I.194 J2.36 E.06493 G1 X20.353 Y-5.075 E.02145 G1 X21.008 Y-5.88 E.03444 G1 X21.337 Y-6.141 E.01392 G1 X21.337 Y-6.487 E.01149 G1 X20.055 Y-6.487 E.04253 G1 X20.504 Y-3.52 F30000 G1 F16200 G3 X20.308 Y-1.938 I-2.6 J.483 E.05373 G2 X21.008 Y-2.262 I-.023 J-.967 E.02631 G1 X21.337 Y-2.666 E.01729 G1 X21.337 Y-.899 E.0586 G1 X21.008 Y-.639 E.01392 G1 X20.353 Y.167 E.03444 G3 X18.715 Y.619 I-1.275 J-1.423 E.05842 G1 X18.387 Y.359 E.01388 G1 X17.732 Y-.446 E.03444 G2 X16.094 Y-.899 I-1.275 J1.423 E.05842 G1 X15.767 Y-.639 E.01388 G1 X15.112 Y.167 E.03444 G1 X14.713 Y.414 E.01555 G1 X14.713 Y-2.002 E.08012 G2 X15.906 Y-2.433 I.362 J-.864 E.04621 G3 X16.071 Y-4.02 I2.526 J-.54 E.05381 G1 X14.713 Y1.611 F30000 G1 F16200 G1 X14.713 Y3.24 E.05401 G2 X15.767 Y2.98 I.34 J-.889 E.0383 G1 X16.422 Y2.174 E.03444 G3 X17.732 Y1.65 I1.319 J1.398 E.04794 G3 X18.387 Y1.982 I-.01 J.833 E.02523 G1 X19.043 Y2.787 E.03444 G2 X20.353 Y3.312 I1.319 J-1.398 E.04794 G2 X21.337 Y2.575 I-.297 J-1.423 E.04209 G1 X21.337 Y4.342 E.0586 G1 X21.008 Y4.603 E.01392 G1 X20.353 Y5.408 E.03444 G3 X19.043 Y5.932 I-1.319 J-1.398 E.04794 G3 X18.387 Y5.6 I.01 J-.833 E.02523 G1 X17.732 Y4.795 E.03444 G2 X16.422 Y4.271 I-1.319 J1.398 E.04794 G2 X15.767 Y4.603 I.01 J.833 E.02523 G1 X15.112 Y5.408 E.03444 G1 X14.713 Y5.655 E.01555 G1 X14.713 Y8.481 E.09375 G2 X15.767 Y8.221 I.34 J-.889 E.0383 G1 X16.422 Y7.416 E.03444 G3 X17.732 Y6.891 I1.319 J1.398 E.04794 G3 X18.387 Y7.223 I-.01 J.833 E.02523 G1 X19.043 Y8.029 E.03444 G2 X20.353 Y8.553 I1.319 J-1.398 E.04794 G2 X21.337 Y7.817 I-.297 J-1.423 E.04209 G1 X21.337 Y9.583 E.0586 G1 X21.008 Y9.844 E.01392 G1 X20.353 Y10.649 E.03444 G3 X19.043 Y11.174 I-1.319 J-1.398 E.04794 G3 X18.387 Y10.842 I.01 J-.833 E.02523 G1 X17.732 Y10.036 E.03444 G2 X16.422 Y9.512 I-1.319 J1.398 E.04794 G2 X15.767 Y9.844 I.01 J.833 E.02523 G1 X15.112 Y10.649 E.03444 G1 X14.713 Y10.896 E.01555 G1 X14.713 Y12.524 E.05401 G1 X16.357 Y13.522 F30000 G1 F16200 G2 X15.836 Y15.03 I1.889 J1.496 E.05395 G1 X15.112 Y15.891 E.03732 G1 X14.713 Y16.137 E.01555 G1 X14.713 Y13.722 E.08012 G2 X15.767 Y13.462 I.34 J-.889 E.0383 G1 X16.422 Y12.657 E.03444 G3 X18.06 Y12.204 I1.275 J1.423 E.05842 G3 X18.548 Y12.662 I-.799 J1.341 E.02238 G3 X20.217 Y13.77 I-.363 J2.359 E.06857 G2 X21.008 Y13.462 I.117 J-.869 E.02938 G1 X21.337 Y13.058 E.01729 G1 X21.336 Y14.825 E.05861 G2 X20.134 Y16.354 I2.516 J3.212 E.06514 G3 X19.398 Y17.039 I-2.017 J-1.432 E.03358 G1 X20.651 Y18.487 F30000 G1 F16200 G1 X19.023 Y18.487 E.05401 G2 X18.06 Y17.446 I-2.852 J1.672 E.04742 G1 X17.732 Y17.374 E.01112 G2 X15.943 Y18.487 I.228 J2.362 E.07242 G1 X14.713 Y18.487 E.0408 G1 X14.713 Y18.088 E.01322 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.713 Y18.487 G1 X15.943 Y18.487 G1 X16.178 Y18.199 ;WIPE_END G1 X8.695 Y19.704 Z10 F30000 G1 X-2.945 Y22.045 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z10 F30000 G1 X-15.232 Y53.745 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.2869 G3 X-15.232 Y52.255 I-.273 J1.954 E.06749 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z10 F30000 G1 X-5.6 Y52.94 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.4288 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290601 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.0316 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z10 F30000 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.0316 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.33 Y46.164 Z10 F30000 G1 X-37.768 Y-1.112 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.977 Y-1.013 E.00767 G3 X-39.877 Y-4.866 I-.832 J-1.985 E.2155 G3 X-38.9 Y-5.148 I1.055 J1.82 E.03409 G3 X-37.725 Y-1.138 I.091 J2.15 E.18962 G1 X-37.734 Y-1.133 E.00034 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.948 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00679 G3 X-39.468 Y-4.613 I-.676 J-1.608 E.18241 G3 X-38.873 Y-4.742 I.688 J1.749 E.02029 G3 X-37.915 Y-1.5 I.064 J1.743 E.1528 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.139 Y-4.266 I-.662 J-1.129 E.13747 G3 X-38.845 Y-4.308 I.306 J1.098 E.00917 G3 X-38.113 Y-1.89 I.035 J1.309 E.1049 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.267 ;WIPE_END G1 X-40.156 Y5.36 Z10 F30000 G1 X-40.547 Y16.255 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.662 Y16.075 E.00709 G3 X-38.9 Y12.852 I1.862 J-1.075 E.14606 G3 X-36.7 Y15.46 I.099 J2.148 E.13069 G3 X-40.505 Y16.309 I-2.1 J-.46 E.162 G1 X-40.522 Y16.287 E.00092 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.208 Y16.029 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.318 Y15.876 E.00623 G3 X-39.468 Y13.387 I1.509 J-.875 E.09887 G3 X-38.873 Y13.258 I.688 J1.749 E.02029 G3 X-40.19 Y16.067 I.064 J1.743 E.23675 G1 X-40.191 Y16.065 E.00007 G1 X-39.847 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.941 Y15.659 E.00489 G3 X-39.139 Y13.734 I1.132 J-.658 E.07413 G3 X-38.844 Y13.692 I.306 J1.098 E.00917 G3 X-39.83 Y15.822 I.035 J1.309 E.16342 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.941 Y15.659 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.655 Y14.017 ;WIPE_END G1 X-38.016 Y6.563 Z10 F30000 G1 X-35.102 Y-6.698 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.813 Y-4.213 Z10 F30000 G1 X-41.937 Y-4.191 Z10 G1 Z9.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-5.819 E.05401 G3 X-41.56 Y-6.14 I.919 J.697 E.01655 G3 X-39.555 Y-5.237 I.367 J1.861 E.07781 G3 X-37.485 Y-4.961 I.72 J2.5 E.07128 G1 X-37.301 Y-5.075 E.00717 G1 X-36.646 Y-5.88 E.03444 G3 X-35.991 Y-6.212 I.666 J.501 E.02523 G1 X-35.313 Y-6.079 E.02292 G1 X-35.313 Y-3.477 E.08632 G2 X-36.505 Y-2.435 I1.465 J2.879 E.05307 G3 X-41.158 Y-3.113 I-2.291 J-.583 E.22995 G1 X-41.937 Y-2.222 E.03923 G1 X-41.937 Y-.578 E.05455 G3 X-41.56 Y-.899 I.919 J.697 E.01655 G3 X-39.922 Y-.446 I.363 J1.876 E.05842 G1 X-39.267 Y.359 E.03444 G1 X-38.939 Y.619 E.01388 G2 X-37.301 Y.167 I.363 J-1.876 E.05842 G1 X-36.646 Y-.639 E.03444 G3 X-35.991 Y-.971 I.666 J.501 E.02523 G1 X-35.313 Y-.838 E.02292 G1 X-35.313 Y1.764 E.08632 G1 X-35.991 Y2.174 E.02628 G1 X-36.646 Y2.98 E.03444 G1 X-36.974 Y3.24 E.01388 G3 X-38.612 Y2.787 I-.363 J-1.876 E.05842 G1 X-39.267 Y1.982 E.03444 G1 X-39.595 Y1.722 E.01388 G2 X-41.232 Y2.174 I-.363 J1.876 E.05842 G1 X-41.937 Y3.019 E.03648 G1 X-41.937 Y4.663 E.05455 G3 X-41.56 Y4.342 I.919 J.697 E.01655 G3 X-39.922 Y4.795 I.363 J1.876 E.05842 G1 X-39.267 Y5.6 E.03444 G1 X-38.939 Y5.861 E.01388 G2 X-37.301 Y5.408 I.363 J-1.876 E.05842 G1 X-36.646 Y4.603 E.03444 G3 X-35.991 Y4.271 I.666 J.501 E.02523 G1 X-35.313 Y4.403 E.02292 G1 X-35.313 Y7.006 E.08632 G1 X-35.991 Y7.416 E.02628 G1 X-36.646 Y8.221 E.03444 G1 X-36.974 Y8.481 E.01388 G3 X-38.612 Y8.029 I-.363 J-1.876 E.05842 G1 X-39.267 Y7.223 E.03444 G1 X-39.595 Y6.963 E.01388 G2 X-41.232 Y7.416 I-.363 J1.876 E.05842 G1 X-41.937 Y8.26 E.03648 G1 X-41.937 Y9.905 E.05455 G3 X-41.56 Y9.584 I.919 J.697 E.01655 G3 X-39.922 Y10.036 I.363 J1.876 E.05842 G1 X-39.267 Y10.842 E.03444 G1 X-38.939 Y11.102 E.01388 G2 X-37.301 Y10.649 I.363 J-1.876 E.05842 G1 X-36.646 Y9.844 E.03444 G3 X-35.991 Y9.512 I.666 J.501 E.02523 G1 X-35.313 Y9.645 E.02292 G1 X-35.313 Y12.247 E.08632 G1 X-35.991 Y12.657 E.02628 G1 X-36.646 Y13.462 E.03444 G1 X-36.87 Y13.64 E.00946 G3 X-36.439 Y14.921 I-1.952 J1.368 E.04545 G3 X-35.991 Y14.753 I.395 J.373 E.01644 G1 X-35.313 Y14.886 E.02292 G1 X-35.313 Y17.488 E.08632 G2 X-36.47 Y18.487 I1.441 J2.839 E.0512 G1 X-38.632 Y18.487 E.0717 G1 X-39.267 Y17.706 E.0334 G2 X-39.922 Y17.374 I-.666 J.501 E.02523 G2 X-41.711 Y18.487 I.228 J2.362 E.07242 G1 X-41.937 Y18.487 E.00748 G1 X-41.937 Y17.084 E.04653 G1 X-40.47 Y13.325 F30000 G1 F16200 G2 X-41.151 Y14.768 I1.721 J1.694 E.05396 G2 X-41.937 Y15.146 I-.032 J.941 E.03008 G1 X-41.937 Y13.501 E.05455 G1 X-41.232 Y12.657 E.03648 G3 X-39.595 Y12.204 I1.275 J1.423 E.05842 G3 X-39.109 Y12.654 I-1.312 J1.902 E.02204 G3 X-37.552 Y12.995 I.225 J2.7 E.05365 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-38.188 Y12.715 G1 X-38.495 Y12.654 G1 X-39.109 Y12.654 G1 X-39.386 Y12.397 ;WIPE_END G1 X-39.375 Y4.765 Z10 F30000 G1 X-39.352 Y-10.052 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.576 E.38227 G1 X-50.248 Y-21.576 E.34797 G1 X-50.248 Y-23.203 E.05396 G1 X-39.758 Y-23.203 E.34797 G1 X-39.748 Y-47.948 E.82085 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.169 E.38227 G1 X-50.655 Y-21.169 E.34797 G1 X-50.655 Y-23.61 E.08096 G1 X-40.165 Y-23.61 E.34797 G1 X-40.155 Y-48.355 E.82085 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.734 E.3541 G1 X-51.09 Y-20.734 E.32233 G1 X-51.09 Y-24.045 E.10173 G1 X-40.6 Y-24.045 E.32233 G1 X-40.59 Y-48.79 E.76035 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.052 Y-16.83 Z10 F30000 G1 X-39.744 Y-21.968 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-39.744 Y-22.811 E.02588 G1 X-49.856 Y-22.811 E.3107 G1 X-49.856 Y-21.968 E.02588 G1 X-39.784 Y-21.968 E.30947 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.435 Y-22.389 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.508244 G1 F15000 G1 X-40.205 Y-22.389 E.34996 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-42.205 Y-22.389 ;WIPE_END G1 X-44.454 Y-29.683 Z10 F30000 G1 X-51.352 Y-52.052 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:9.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.737 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.28 Y-1.715 I.005 J1.739 E.00933 G1 X50.34 Y-1.709 E.002 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.737 I-.662 J-1.608 E.20228 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.32 Y-2.12 I.006 J2.147 E.01065 G1 X50.42 Y-2.111 E.00333 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.143 I-.818 J-1.985 E.25004 G1 X49.99 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00031 G1 X50.363 Y-2.553 E.0112 G1 X50.505 Y-2.539 E.0044 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.95 Y-2.584 E.01406 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.363 Y-2.553 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.769 Y-1.882 ;WIPE_END G1 X50.205 Y.017 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.431206 G1 F15000 G1 X50.15 Y-.141 E.0053 G1 X49.921 Y-.191 E.00742 G1 X49.809 Y-.079 E.005 G1 X49.809 Y.079 E.005 G1 X49.921 Y.191 E.005 G1 X50.079 Y.191 E.005 G1 X50.196 Y.056 E.00564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.187 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.859 Y-.572 E.01012 G1 X49.623 Y-.452 E.00813 G1 X49.454 Y-.226 E.00866 G1 X49.415 Y.059 E.00885 G1 X49.509 Y.328 E.00876 G1 X49.724 Y.519 E.00884 G1 X50 Y.591 E.00877 G1 X50.278 Y.518 E.00884 G1 X50.491 Y.328 E.00877 G1 X50.586 Y.055 E.00889 G1 X50.546 Y-.226 E.00872 G1 X50.384 Y-.446 E.0084 G1 X50.223 Y-.522 E.00547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.219 Y-.918 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.875 Y-.958 E.01064 G1 X49.538 Y-.848 E.01088 G1 X49.314 Y-.686 E.00849 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G2 X50.951 Y-.189 I-1.017 J-.383 E.0175 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.257 Y-.904 E.00918 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.335 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.991 Y-1.348 E.01079 G1 X49.597 Y-1.281 E.01225 G1 X49.251 Y-1.122 E.01173 G1 X48.96 Y-.849 E.01225 G1 X48.754 Y-.516 E.01203 G1 X48.664 Y-.13 E.01219 G1 X48.677 Y.263 E.01208 G1 X48.817 Y.634 E.01218 G1 X49.046 Y.954 E.0121 G1 X49.368 Y1.184 E.01217 G1 X49.737 Y1.323 E.0121 G1 X50.133 Y1.336 E.01217 G1 X50.516 Y1.246 E.0121 G1 X50.853 Y1.037 E.01218 G1 X51.122 Y.749 E.01209 G1 X51.285 Y.388 E.0122 G1 X51.336 Y.129 E.0081 G1 X51.323 Y-.263 E.01205 G1 X51.18 Y-.64 E.01237 G1 X50.954 Y-.954 E.0119 G1 X50.66 Y-1.169 E.01118 G1 X50.373 Y-1.266 E.00933 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.66 Y-1.169 G1 X50.954 Y-.954 G1 X51.18 Y-.64 G1 X51.323 Y-.263 G1 X51.336 Y.129 G1 X51.307 Y.276 ;WIPE_END G1 X44.507 Y-3.19 Z10.2 F30000 G1 X-51.352 Y-52.052 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z10.2 F30000 G1 X-39.352 Y-10.052 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.748 E.38797 G1 X-50.248 Y-21.748 E.34797 G1 X-50.248 Y-23.031 E.04256 G1 X-39.758 Y-23.031 E.34797 G1 X-39.748 Y-47.948 E.82654 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.341 E.38797 G1 X-50.655 Y-21.341 E.34797 G1 X-50.655 Y-23.438 E.06957 G1 X-40.165 Y-23.438 E.34797 G1 X-40.155 Y-48.355 E.82654 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-20.906 E.35938 G1 X-51.09 Y-20.906 E.32233 G1 X-51.09 Y-23.873 E.09117 G1 X-40.6 Y-23.873 E.32233 G1 X-40.59 Y-48.79 E.76563 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.077 Y-16.832 Z10.2 F30000 G1 X-39.775 Y-22.17 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.480911 G1 F15000 G1 X-39.775 Y-22.608 E.01563 G1 X-49.825 Y-22.608 E.35872 G1 X-49.825 Y-22.17 E.01563 G1 X-39.815 Y-22.17 E.35729 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.815 Y-22.17 ;WIPE_END G1 X-40.374 Y-14.675 Z10.2 F30000 G1 X-37.768 Y-1.112 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.976 Y-1.011 E.00768 G3 X-38.895 Y-5.148 I-.826 J-1.987 E.24925 G3 X-36.7 Y-2.536 I.095 J2.149 E.13069 G3 X-37.724 Y-1.136 I-2.102 J-.462 E.05922 G1 X-37.733 Y-1.131 E.00033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.948 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00679 G3 X-39.468 Y-4.613 I-.676 J-1.608 E.1824 G3 X-38.869 Y-4.742 I.689 J1.752 E.02043 G3 X-37.915 Y-1.5 I.06 J1.744 E.15268 G1 X-38.147 Y-1.869 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.139 Y-4.266 I-.662 J-1.13 E.13745 G3 X-38.84 Y-4.308 I.309 J1.114 E.0093 G3 X-38.113 Y-1.89 I.032 J1.309 E.10483 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.727 Y-2.073 G1 X-39.878 Y-2.271 ;WIPE_END G1 X-40.154 Y5.356 Z10.2 F30000 G1 X-40.547 Y16.255 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.671 Y16.08 E.00711 G3 X-39.877 Y13.134 I1.863 J-1.078 E.11249 G3 X-38.895 Y12.852 I1.055 J1.822 E.03423 G3 X-40.514 Y16.315 I.087 J2.15 E.29246 G1 X-40.528 Y16.29 E.00095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.209 Y16.029 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.317 Y15.876 E.00622 G3 X-39.468 Y13.387 I1.508 J-.875 E.09884 G3 X-38.869 Y13.258 I.689 J1.752 E.02043 G3 X-40.189 Y16.066 I.06 J1.743 E.23653 G1 X-40.19 Y16.064 E.00007 G1 X-39.847 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.941 Y15.659 E.00489 G3 X-39.139 Y13.734 I1.132 J-.658 E.0741 G3 X-38.84 Y13.692 I.309 J1.113 E.0093 G3 X-39.829 Y15.821 I.032 J1.309 E.16333 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.941 Y15.659 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.655 Y14.017 ;WIPE_END G1 X-38.016 Y6.563 Z10.2 F30000 G1 X-35.102 Y-6.698 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 M73 P71 R23 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-41.879 Y-4.667 Z10.2 F30000 G1 X-41.937 Y-4.661 Z10.2 G1 Z9.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y-6.289 E.05401 G3 X-41.628 Y-6.487 I.255 J.059 E.01346 G3 X-39.922 Y-5.61 I-.165 J2.419 E.06544 G1 X-39.677 Y-5.195 E.01597 G3 X-37.509 Y-4.977 I.848 J2.448 E.07461 G2 X-36.646 Y-6.392 I-2.815 J-2.686 E.05541 G1 X-36.387 Y-6.487 E.00915 G3 X-35.336 Y-6.165 I-.03 J1.977 E.03695 G1 X-35.313 Y-3.554 E.08662 G1 X-35.991 Y-2.989 E.02928 G2 X-36.646 Y-1.75 I6.658 J4.312 E.04656 G1 X-36.845 Y-1.677 E.00701 G3 X-41.163 Y-3.048 I-1.956 J-1.325 E.20106 G2 X-41.888 Y-1.75 I4.406 J3.311 E.04949 G1 X-41.937 Y-1.732 E.00174 G1 X-41.937 Y-1.048 E.02269 G1 X-41.888 Y-1.151 E.00379 G1 X-41.56 Y-1.271 E.01157 G3 X-39.922 Y-.368 I-.632 J3.085 E.06298 G3 X-39.267 Y.871 I-6.658 J4.312 E.04656 G1 X-38.939 Y.991 E.01157 G2 X-37.301 Y.089 I-.632 J-3.085 E.06298 G2 X-36.646 Y-1.151 I-6.658 J-4.312 E.04656 G1 X-36.319 Y-1.271 E.01157 G3 X-35.336 Y-.924 I-.546 J3.116 E.03472 G1 X-35.313 Y1.687 E.08662 G1 X-35.991 Y2.252 E.02928 G2 X-36.646 Y3.492 I6.658 J4.312 E.04656 G1 X-36.974 Y3.612 E.01157 G3 X-38.612 Y2.709 I.632 J-3.085 E.06298 G3 X-39.267 Y1.47 I6.658 J-4.312 E.04656 G1 X-39.595 Y1.35 E.01157 G2 X-41.232 Y2.252 I.632 J3.085 E.06298 G2 X-41.888 Y3.492 I6.658 J4.312 E.04656 G1 X-41.937 Y3.51 E.00174 G1 X-41.937 Y4.194 E.02269 G1 X-41.888 Y4.091 E.00379 G1 X-41.56 Y3.971 E.01157 G3 X-39.922 Y4.873 I-.632 J3.085 E.06298 G3 X-39.267 Y6.112 I-6.658 J4.312 E.04656 G1 X-38.939 Y6.232 E.01157 G2 X-37.301 Y5.33 I-.632 J-3.085 E.06298 G2 X-36.646 Y4.091 I-6.658 J-4.312 E.04656 G1 X-36.319 Y3.971 E.01157 G3 X-35.336 Y4.317 I-.546 J3.116 E.03472 G1 X-35.313 Y6.928 E.08662 G1 X-35.991 Y7.494 E.02928 G2 X-36.646 Y8.733 I6.658 J4.312 E.04656 G1 X-36.974 Y8.853 E.01157 G3 X-38.612 Y7.951 I.632 J-3.085 E.06298 G3 X-39.267 Y6.711 I6.658 J-4.312 E.04656 G1 X-39.595 Y6.591 E.01157 G2 X-41.232 Y7.494 I.632 J3.085 E.06298 G2 X-41.888 Y8.733 I6.658 J4.312 E.04656 G1 X-41.937 Y8.751 E.00174 G1 X-41.937 Y9.435 E.02269 G1 X-41.888 Y9.332 E.00379 G1 X-41.56 Y9.212 E.01157 G3 X-39.922 Y10.114 I-.632 J3.085 E.06298 G3 X-39.267 Y11.354 I-6.658 J4.312 E.04656 G1 X-38.939 Y11.474 E.01157 G2 X-37.301 Y10.571 I-.632 J-3.085 E.06298 G2 X-36.646 Y9.332 I-6.658 J-4.312 E.04656 G1 X-36.319 Y9.212 E.01157 G3 X-35.336 Y9.558 I-.546 J3.116 E.03472 G1 X-35.313 Y12.17 E.08662 G1 X-35.991 Y12.735 E.02928 G2 X-36.646 Y13.974 I6.658 J4.312 E.04656 G2 X-36.489 Y14.516 I5.503 J-1.302 E.01871 G1 X-36.319 Y14.453 E.00603 G3 X-35.336 Y14.8 I-.546 J3.116 E.03472 G1 X-35.313 Y17.411 E.08662 G1 X-35.991 Y17.976 E.02928 G1 X-36.293 Y18.487 E.01968 G1 X-38.549 Y18.487 E.07481 G3 X-39.203 Y17.327 I4.264 J-3.172 E.04431 G3 X-39.825 Y17.127 I.418 J-2.364 E.02171 G2 X-41.232 Y17.976 I.91 J3.1 E.05515 G1 X-41.535 Y18.487 E.01968 G1 X-41.937 Y18.487 E.01335 G1 X-41.937 Y17.261 E.04067 G1 X-40.322 Y13.195 F30000 G1 F16200 G2 X-41.122 Y14.574 I1.779 J1.954 E.05373 G2 X-41.888 Y14.573 I-.384 J.77 E.02631 G1 X-41.937 Y14.676 E.00379 G1 X-41.937 Y13.992 E.02269 G1 X-41.888 Y13.974 E.00174 G3 X-41.232 Y12.735 I7.313 J3.073 E.04656 G3 X-39.595 Y11.833 I2.27 J2.183 E.06298 G1 X-39.267 Y11.953 E.01157 G2 X-38.936 Y12.643 I4.056 J-1.517 E.02543 G3 X-37.406 Y13.092 I.051 J2.66 E.05375 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-38.188 Y12.715 G1 X-38.936 Y12.643 G1 X-39.1 Y12.301 ;WIPE_END G1 X-35.291 Y18.915 Z10.2 F30000 G1 X-15.232 Y53.745 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z10.2 F30000 G1 X-5.6 Y52.94 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.255 J1.928 E.27019 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42898 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.672 J.79 E.48866 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290595 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z10.2 F30000 G1 X-3.671 Y51.454 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.0316 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.601 E.01237 G1 X-2.226 Y52.224 E.01253 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.792 Y53.101 E.00948 G1 X-2.792 Y52.898 E.00623 G1 X-2.885 Y52.604 E.00948 G1 X-3.093 Y52.378 E.00945 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.166 Y52.948 E.00488 G1 X-3.247 Y52.752 E.00651 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.166 Y52.948 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z10.2 F30000 G1 X-2.945 Y22.045 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.858 Y17.192 Z10.2 F30000 G1 X18.614 Y-.891 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.869 E.00448 G3 X16.083 Y-2.625 I-.281 J-2.132 E.10886 G3 X18.105 Y-5.148 I2.117 J-.375 E.12138 G3 X20.317 Y-3.375 I.094 J2.15 E.10269 G3 X18.756 Y-.924 I-2.117 J.375 E.10585 G1 X18.653 Y-.9 E.00352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.535 Y-1.29 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.427 Y-1.272 E.0036 G3 X16.482 Y-2.704 I-.228 J-1.728 E.08853 G3 X18.131 Y-4.742 I1.719 J-.295 E.09839 G3 X19.918 Y-3.296 I.067 J1.744 E.08325 G3 X18.651 Y-1.317 I-1.718 J.295 E.08553 G1 X18.574 Y-1.299 E.00264 G1 X18.45 Y-1.716 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.703 E.00246 G3 X17.861 Y-4.266 I-.18 J-1.296 E.12161 G3 X18.16 Y-4.308 I.309 J1.114 E.0093 G3 X18.538 Y-1.737 I.032 J1.308 E.11652 G1 X18.489 Y-1.726 E.00157 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.703 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.935 Y-2.658 ;WIPE_END G1 X17.254 Y4.967 Z10.2 F30000 G1 X17.763 Y17.105 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.642 Y17.081 E.00408 G3 X17.123 Y13.134 I.549 J-2.08 E.16868 G3 X18.105 Y12.852 I1.055 J1.822 E.03423 G3 X17.919 Y17.135 I.087 J2.149 E.23612 G1 X17.802 Y17.113 E.00394 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.842 Y16.706 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.747 Y16.689 E.0032 G3 X17.532 Y13.387 I.444 J-1.687 E.1445 G3 X18.131 Y13.258 I.689 J1.752 E.02043 G3 X17.972 Y16.733 I.06 J1.744 E.1911 G1 X17.882 Y16.714 E.00306 G1 X17.933 Y16.274 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.698 Y16.213 E.00748 G3 X17.861 Y13.734 I.494 J-1.212 E.10053 G3 X18.16 Y13.692 I.309 J1.113 E.0093 G3 X18.029 Y16.299 I.032 J1.308 E.13231 G1 X17.972 Y16.284 E.00181 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.698 Y16.213 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.829 G1 X16.902 Y14.825 ;WIPE_END G1 X16.056 Y7.239 Z10.2 F30000 G1 X14.502 Y-6.698 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.713 Y-6.443 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-4.815 E.05401 G2 X15.439 Y-5.706 I-.926 J-1.495 E.03886 G1 X15.767 Y-6.392 E.02521 G3 X16.422 Y-6.436 I.376 J.694 E.02247 G3 X17.891 Y-5.346 I-.567 J2.299 E.06233 G3 X19.831 Y-4.71 I.294 J2.379 E.06994 G2 X20.68 Y-5.706 I-1.016 J-1.726 E.04425 G1 X21.008 Y-6.392 E.02521 G3 X21.337 Y-6.487 I.294 J.402 E.01159 G1 X21.337 Y-2.437 E.13433 G2 X21.008 Y-1.75 I3.708 J2.196 E.02532 G3 X20.213 Y-1.763 I-.384 J-.788 E.02738 G2 X20.542 Y-3.325 I-2.054 J-1.249 E.05398 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.505 Y-2.485 G1 X20.213 Y-1.763 G1 X20.579 Y-1.659 ;WIPE_END G1 X15.979 Y-3.79 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 G1 F16200 G2 X15.98 Y-2.196 I2.481 J.795 E.05373 G1 X15.767 Y-1.75 E.01641 G3 X14.713 Y-1.87 I-.42 J-.999 E.03676 G1 X14.713 Y.427 E.07618 G2 X15.439 Y-.465 I-.926 J-1.495 E.03886 G1 X15.767 Y-1.151 E.02521 G3 X16.422 Y-1.195 I.362 J.48 E.02304 G3 X18.06 Y.185 I-.633 J2.413 E.07344 G1 X18.387 Y.871 E.02521 G2 X19.043 Y.915 I.362 J-.48 E.02304 G2 X20.68 Y-.465 I-.84 J-2.659 E.07293 G1 X21.008 Y-1.151 E.02521 G1 X21.337 Y-1.27 E.01161 G1 X21.337 Y2.804 E.13515 G2 X21.008 Y3.492 I3.708 J2.196 E.02532 G3 X20.353 Y3.536 I-.362 J-.48 E.02304 G3 X18.715 Y2.156 I.84 J-2.659 E.07293 G1 X18.387 Y1.47 E.02521 G2 X17.732 Y1.426 I-.362 J.48 E.02304 G2 X16.094 Y2.806 I.84 J2.659 E.07293 G1 X15.767 Y3.492 E.02521 G3 X14.713 Y3.371 I-.42 J-.999 E.03676 G1 X14.713 Y5.668 E.07618 G2 X15.439 Y4.776 I-.926 J-1.495 E.03886 G1 X15.767 Y4.091 E.02521 G3 X16.422 Y4.046 I.362 J.48 E.02304 G3 X18.06 Y5.427 I-.84 J2.659 E.07293 G1 X18.387 Y6.112 E.02521 G2 X19.043 Y6.157 I.362 J-.48 E.02304 G2 X20.68 Y4.776 I-.84 J-2.659 E.07293 G1 X21.008 Y4.091 E.02521 G1 X21.337 Y3.971 E.01161 G1 X21.337 Y8.045 E.13515 G2 X21.008 Y8.733 I3.708 J2.196 E.02532 G3 X20.353 Y8.777 I-.362 J-.48 E.02304 G3 X18.715 Y7.397 I.84 J-2.659 E.07293 G1 X18.387 Y6.711 E.02521 G2 X17.732 Y6.667 I-.362 J.48 E.02304 G2 X16.094 Y8.047 I.84 J2.659 E.07293 G1 X15.767 Y8.733 E.02521 G3 X14.713 Y8.613 I-.42 J-.999 E.03676 G1 X14.713 Y10.909 E.07618 G2 X15.439 Y10.018 I-.926 J-1.495 E.03886 G1 X15.767 Y9.332 E.02521 G3 X16.422 Y9.288 I.362 J.48 E.02304 G3 X18.06 Y10.668 I-.84 J2.659 E.07293 G1 X18.387 Y11.354 E.02521 G2 X19.043 Y11.398 I.362 J-.48 E.02304 G2 X20.68 Y10.018 I-.84 J-2.659 E.07293 G1 X21.008 Y9.332 E.02521 G1 X21.337 Y9.212 E.01161 G1 X21.337 Y13.287 E.13515 G2 X21.008 Y13.974 I3.708 J2.196 E.02532 G3 X20.347 Y14.016 I-.38 J-.765 E.02256 G2 X18.753 Y12.703 I-2.261 J1.121 E.07058 G3 X18.387 Y11.953 I4.047 J-2.438 E.02773 G2 X17.732 Y11.908 I-.362 J.48 E.02304 G2 X16.094 Y13.289 I.84 J2.659 E.07293 G1 X15.767 Y13.974 E.02521 G3 X14.713 Y13.854 I-.42 J-.999 E.03676 G1 X14.713 Y16.151 E.07618 G2 X15.439 Y15.259 I-.926 J-1.495 E.03886 G1 X15.767 Y14.573 E.02521 G1 X15.887 Y14.529 E.00424 G2 X15.835 Y14.988 I1.715 J.425 E.01534 G1 X14.713 Y18.265 F30000 G1 F16200 G1 X14.713 Y18.487 E.00735 G1 X16.12 Y18.487 E.04666 G1 X16.422 Y17.976 E.01968 G1 X17.077 Y17.42 E.0285 G1 X17.487 Y17.251 E.01471 G2 X18.461 Y17.349 I.833 J-3.401 E.0326 G2 X19.043 Y18.433 I6.403 J-2.733 E.04087 G1 X19.106 Y18.487 E.00275 G1 X21.337 Y18.487 E.07401 G1 X21.337 Y14.454 E.13379 G1 X21.008 Y14.573 E.01161 G3 X20.492 Y15.577 I-5.915 J-2.405 E.03748 G3 X19.603 Y16.902 I-2.332 J-.604 E.05395 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.077 Y16.44 G1 X20.386 Y15.905 G1 X20.492 Y15.577 G1 X20.664 Y15.243 ;WIPE_END G1 X20.089 Y7.632 Z10.2 F30000 G1 X18.752 Y-10.052 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z10.2 F30000 G1 X30.752 Y-52.052 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:10 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;10 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.4 I-1.134 J.442 P1 F30000 G1 X50 Y-1.737 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.277 Y-1.716 I.005 J1.739 E.00922 G1 X50.34 Y-1.709 E.00211 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.736 I-.662 J-1.608 E.20228 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.317 Y-2.121 I.005 J2.147 E.01054 G1 X50.42 Y-2.111 E.00344 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.143 I-.818 J-1.985 E.25004 G1 X49.994 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00018 G1 X50.359 Y-2.554 E.01109 G1 X50.505 Y-2.539 E.0045 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.954 Y-2.584 E.01418 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.359 Y-2.554 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.772 Y-1.879 ;WIPE_END G1 X50.205 Y.017 Z10.4 F30000 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.431194 G1 F15000 G1 X50.15 Y-.141 E.0053 G1 X49.921 Y-.191 E.00742 G1 X49.809 Y-.079 E.005 G1 X49.809 Y.079 E.005 G1 X49.921 Y.191 E.005 G1 X50.079 Y.191 E.005 G1 X50.196 Y.056 E.00564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.187 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.859 Y-.572 E.01012 G1 X49.623 Y-.452 E.00813 G1 X49.454 Y-.226 E.00866 G1 X49.415 Y.059 E.00885 G1 X49.509 Y.328 E.00876 G1 X49.724 Y.519 E.00884 G1 X50 Y.591 E.00877 G1 X50.278 Y.518 E.00884 G1 X50.491 Y.328 E.00877 G1 X50.586 Y.055 E.00889 G1 X50.546 Y-.226 E.00872 G1 X50.384 Y-.446 E.0084 G1 X50.223 Y-.522 E.00547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.219 Y-.918 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.875 Y-.958 E.01064 G1 X49.538 Y-.848 E.01088 G1 X49.314 Y-.686 E.00849 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G2 X50.951 Y-.189 I-1.017 J-.383 E.0175 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.257 Y-.904 E.00918 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.335 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.991 Y-1.348 E.01079 G1 X49.597 Y-1.281 E.01225 G1 X49.251 Y-1.122 E.01173 G1 X48.96 Y-.849 E.01225 G1 X48.754 Y-.516 E.01203 G1 X48.664 Y-.13 E.01219 G1 X48.677 Y.263 E.01208 G1 X48.817 Y.634 E.01218 G1 X49.046 Y.954 E.0121 G1 X49.368 Y1.184 E.01217 G1 X49.737 Y1.323 E.0121 G1 X50.133 Y1.336 E.01217 G1 X50.516 Y1.246 E.0121 G1 X50.853 Y1.037 E.01218 G1 X51.122 Y.749 E.01209 G1 X51.285 Y.388 E.0122 G1 X51.336 Y.129 E.0081 G1 X51.323 Y-.263 E.01205 G1 X51.18 Y-.64 E.01237 G1 X50.954 Y-.954 E.0119 G1 X50.66 Y-1.169 E.01118 G1 X50.373 Y-1.266 E.00933 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.66 Y-1.169 G1 X50.954 Y-.954 G1 X51.18 Y-.64 G1 X51.323 Y-.263 G1 X51.336 Y.129 G1 X51.307 Y.276 ;WIPE_END G1 X48.517 Y-6.828 Z10.4 F30000 G1 X30.752 Y-52.052 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z10.4 F30000 G1 X18.752 Y-10.052 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.433 Y-3.593 Z10.4 F30000 G1 X18.605 Y-.889 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.867 E.00417 G3 X17.123 Y-4.866 I-.289 J-2.132 E.19671 G3 X18.109 Y-5.148 I1.056 J1.823 E.03436 G3 X18.757 Y-.923 I.083 J2.15 E.20797 G1 X18.644 Y-.897 E.00384 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.525 Y-1.288 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.27 E.00329 G3 X17.532 Y-4.613 I-.236 J-1.729 E.16723 G3 X18.135 Y-4.742 I.69 J1.755 E.02056 G3 X18.651 Y-1.315 I.056 J1.744 E.16825 G1 X18.564 Y-1.296 E.00295 G1 X18.44 Y-1.715 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.703 E.00217 G3 X17.861 Y-4.266 I-.179 J-1.297 E.12157 G3 X18.164 Y-4.308 I.312 J1.129 E.00942 G3 X18.538 Y-1.737 I.028 J1.309 E.11644 G1 X18.479 Y-1.724 E.00186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.703 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.934 Y-2.661 G1 X16.933 Y-2.668 ;WIPE_END G1 X17.244 Y4.958 Z10.4 F30000 G1 X17.74 Y17.1 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.642 Y17.081 E.00329 G3 X17.123 Y13.134 I.549 J-2.08 E.16866 G3 X18.109 Y12.852 I1.056 J1.823 E.03436 G3 X17.919 Y17.135 I.083 J2.15 E.236 G1 X17.779 Y17.108 E.00473 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.819 Y16.701 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.747 Y16.689 E.00241 G3 X17.532 Y13.387 I.444 J-1.687 E.14448 G3 X18.135 Y13.258 I.69 J1.755 E.02056 G3 X17.972 Y16.733 I.056 J1.744 E.191 G1 X17.858 Y16.709 E.00385 G1 X17.904 Y16.274 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.861 Y16.267 E.00136 G3 X17.861 Y13.734 I.331 J-1.266 E.10576 G3 X18.164 Y13.692 I.312 J1.129 E.00942 G3 X18.029 Y16.299 I.028 J1.309 E.13223 G1 X17.943 Y16.282 E.00268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.861 Y16.267 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.829 G1 X16.907 Y14.796 ;WIPE_END G1 X16.058 Y7.211 Z10.4 F30000 G1 X14.502 Y-6.698 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X21.337 Y-5.749 Z10.4 F30000 G1 Z10 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-6.487 E.02448 G1 X20.447 Y-6.487 E.02953 G1 X20.54 Y-6.364 E.00512 G3 X19.982 Y-4.726 I-2.037 J.22 E.05926 G1 X19.888 Y-4.656 E.00389 G2 X17.818 Y-5.331 I-1.693 J1.678 E.07501 G2 X16.757 Y-6.487 I-2.703 J1.415 E.05262 G1 X15.205 Y-6.487 E.05149 G1 X15.299 Y-6.364 E.00512 G3 X14.741 Y-4.726 I-2.037 J.22 E.05926 G1 X14.713 Y-1.702 E.10033 G3 X15.299 Y-1.123 I-.712 J1.305 E.02768 G3 X14.741 Y.515 I-2.037 J.22 E.05926 G1 X14.713 Y3.54 E.10033 G3 X15.299 Y4.119 I-.712 J1.305 E.02768 G3 X14.741 Y5.757 I-2.037 J.22 E.05926 G1 X14.713 Y8.781 E.10033 G3 X15.299 Y9.36 I-.712 J1.305 E.02768 G3 X14.741 Y10.998 I-2.037 J.22 E.05926 G1 X14.713 Y14.022 E.10033 G3 X15.299 Y14.601 I-.712 J1.305 E.02768 G3 X14.741 Y16.239 I-2.037 J.22 E.05926 G1 X14.713 Y18.487 E.07456 G1 X16.281 Y18.487 E.052 G3 X17.286 Y17.181 I2.26 J.701 E.05583 G2 X18.849 Y17.273 I.915 J-2.248 E.05287 G1 X18.812 Y17.55 E.00926 G1 X18.969 Y18.205 E.02235 G1 X19.16 Y18.487 E.01131 G1 X20.789 Y18.487 E.05401 G1 X20.021 Y16.504 F30000 G1 F16200 G2 X18.918 Y12.751 I-1.809 J-1.507 E.15316 G3 X19.104 Y11.653 I.829 J-.424 E.03958 G1 X19.982 Y10.998 E.03634 G2 X20.583 Y9.688 I-1.434 J-1.452 E.04888 G2 X20.291 Y9.032 I-.723 J-.07 E.02489 G1 X19.413 Y8.377 E.03634 G3 X18.812 Y7.067 I1.434 J-1.452 E.04888 G3 X19.104 Y6.412 I.723 J-.07 E.02489 G1 X19.982 Y5.757 E.03634 G2 X20.583 Y4.446 I-1.434 J-1.452 E.04888 G2 X20.291 Y3.791 I-.723 J-.07 E.02489 G1 X19.413 Y3.136 E.03634 G3 X18.812 Y1.826 I1.434 J-1.452 E.04888 G3 X19.104 Y1.171 I.723 J-.07 E.02489 G1 X19.982 Y.515 E.03634 G2 X20.583 Y-.795 I-1.434 J-1.452 E.04888 G2 X20.099 Y-1.593 I-1.026 J.076 E.03215 G3 X17.364 Y-.791 I-1.901 J-1.417 E.10144 G3 X17.963 Y.515 I-1.43 J1.446 E.04871 G3 X17.671 Y1.171 I-.723 J.07 E.02489 G1 X16.793 Y1.826 E.03634 G2 X16.191 Y3.136 I1.434 J1.452 E.04888 G2 X16.483 Y3.791 I.723 J.07 E.02489 G1 X17.361 Y4.446 E.03634 G3 X17.963 Y5.757 I-1.434 J1.452 E.04888 G3 X17.671 Y6.412 I-.723 J.07 E.02489 G1 X16.793 Y7.067 E.03634 G2 X16.191 Y8.377 I1.434 J1.452 E.04888 G2 X16.483 Y9.032 I.723 J.07 E.02489 G1 X17.361 Y9.688 E.03634 G3 X17.963 Y10.998 I-1.434 J1.452 E.04888 G3 X17.671 Y11.653 I-.723 J.07 E.02489 G1 X16.793 Y12.308 E.03634 G2 X16.191 Y13.619 I1.434 J1.452 E.04888 G1 X16.207 Y13.734 E.00386 G2 X15.853 Y15.29 I2.324 J1.346 E.05374 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X15.915 Y14.388 G1 X16.207 Y13.734 G1 X16.191 Y13.619 G1 X16.253 Y13.363 ;WIPE_END G1 X9.298 Y16.508 Z10.4 F30000 G1 X-2.945 Y22.045 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z10.4 F30000 G1 X-15.232 Y53.745 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.746 E.28696 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z10.4 F30000 G1 X-5.6 Y52.94 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.258 J1.926 E.26965 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.169 J.901 E.42815 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42878 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48846 M73 P71 R22 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290589 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.2 E.01237 G1 X-18.436 Y53.649 E.01437 G1 X-18.262 Y53.944 E.01053 G1 X-17.975 Y54.231 E.01248 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-18.191 Y53.146 I.146 J1.172 E.05681 G1 X-18.025 Y53.603 E.01496 G1 X-17.743 Y53.929 E.01324 G2 X-16.101 Y53.713 I.713 J-.929 E.05653 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.322 E.0098 G1 X-17.657 Y52.519 E.0094 G1 X-17.79 Y52.807 E.00975 G1 X-17.814 Y53.092 E.00878 G1 X-17.661 Y53.478 E.01277 G1 X-17.42 Y53.68 E.00967 G1 X-17.133 Y53.784 E.00938 G1 X-16.826 Y53.757 E.00948 G1 X-16.549 Y53.627 E.00941 G1 X-16.313 Y53.327 E.01173 G1 X-16.196 Y53.016 E.01021 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.319 Y52.714 E.0065 G1 X-17.426 Y52.905 E.00672 G1 X-17.411 Y53.126 E.00681 G1 X-17.315 Y53.291 E.00588 G1 X-17.134 Y53.393 E.00639 G1 X-16.924 Y53.393 E.00647 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z10.4 F30000 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.33 Y46.164 Z10.4 F30000 G1 X-37.768 Y-1.112 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.978 Y-1.014 E.00768 G3 X-39.877 Y-4.866 I-.831 J-1.984 E.21538 G3 X-38.891 Y-5.148 I1.056 J1.823 E.03436 G3 X-37.726 Y-1.14 I.083 J2.15 E.18931 G1 X-37.734 Y-1.134 E.00033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.948 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.0068 G3 X-39.468 Y-4.613 I-.675 J-1.609 E.18238 G3 X-38.865 Y-4.742 I.69 J1.755 E.02056 G3 X-37.915 Y-1.5 I.056 J1.744 E.15257 G1 X-38.147 Y-1.87 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.139 Y-4.266 I-.661 J-1.13 E.13733 G3 X-38.836 Y-4.308 I.312 J1.129 E.00942 G3 X-38.113 Y-1.89 I.028 J1.309 E.10471 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.268 ;WIPE_END G1 X-40.157 Y5.36 Z10.4 F30000 G1 X-40.547 Y16.255 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.666 Y16.077 E.00709 G3 X-38.891 Y12.852 I1.864 J-1.076 E.14652 G3 X-36.701 Y15.468 I.09 J2.149 E.13069 G3 X-40.509 Y16.311 I-2.101 J-.466 E.16195 G1 X-40.525 Y16.288 E.00094 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.209 Y16.029 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.318 Y15.876 E.00622 G3 X-39.468 Y13.387 I1.51 J-.875 E.09886 G3 X-38.865 Y13.258 I.69 J1.755 E.02056 G3 X-40.19 Y16.067 I.056 J1.744 E.23659 G1 X-40.191 Y16.065 E.00008 G1 X-39.847 Y15.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.94 Y15.658 E.00488 G3 X-39.139 Y13.734 I1.132 J-.658 E.07405 G3 X-38.836 Y13.692 I.312 J1.129 E.00942 G3 X-39.828 Y15.821 I.028 J1.309 E.16314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.94 Y15.658 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.655 Y14.017 ;WIPE_END G1 X-38.016 Y6.563 Z10.4 F30000 G1 X-35.102 Y-6.698 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.461 Y-2.66 Z10.4 F30000 G1 Z10 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-37.213 Y-1.252 I-2.628 J-.5 E.05375 G3 X-37.071 Y-.795 I-.331 J.353 E.0166 G3 X-37.672 Y.515 I-2.036 J-.141 E.04888 G1 X-38.55 Y1.171 E.03634 G2 X-38.842 Y1.826 I.43 J.585 E.02489 G2 X-38.241 Y3.136 I2.036 J-.141 E.04888 G1 X-37.363 Y3.791 E.03634 G3 X-37.071 Y4.446 I-.43 J.585 E.02489 G3 X-37.672 Y5.757 I-2.036 J-.141 E.04888 G1 X-38.55 Y6.412 E.03634 G2 X-38.842 Y7.067 I.43 J.585 E.02489 G2 X-38.241 Y8.377 I2.036 J-.141 E.04888 G1 X-37.363 Y9.032 E.03634 G3 X-37.071 Y9.688 I-.43 J.585 E.02489 G3 X-37.672 Y10.998 I-2.036 J-.141 E.04888 G1 X-38.55 Y11.653 E.03634 G2 X-38.762 Y12.645 I.589 J.644 E.03589 G2 X-41.072 Y14.348 I-.048 J2.353 E.10238 G3 X-41.463 Y13.619 I.61 J-.797 E.0283 G3 X-40.862 Y12.308 I2.036 J.141 E.04888 G1 X-39.984 Y11.653 E.03634 G2 X-39.691 Y10.998 I-.43 J-.585 E.02489 G2 X-40.293 Y9.688 I-2.036 J.141 E.04888 G1 X-41.171 Y9.032 E.03634 G3 X-41.463 Y8.377 I.43 J-.585 E.02489 G3 X-40.862 Y7.067 I2.036 J.141 E.04888 G1 X-39.984 Y6.412 E.03634 G2 X-39.691 Y5.757 I-.43 J-.585 E.02489 G2 X-40.293 Y4.446 I-2.036 J.141 E.04888 G1 X-41.171 Y3.791 E.03634 G3 X-41.463 Y3.136 I.43 J-.585 E.02489 G3 X-40.862 Y1.826 I2.036 J.141 E.04888 G1 X-39.984 Y1.171 E.03634 G2 X-39.691 Y.515 I-.43 J-.585 E.02489 G2 X-40.293 Y-.795 I-2.036 J.141 E.04888 G1 X-41.171 Y-1.45 E.03634 G3 X-41.463 Y-2.105 I.43 J-.585 E.02489 G1 X-41.306 Y-2.76 E.02235 G1 X-41.164 Y-2.97 E.0084 G3 X-40.643 Y-4.479 I2.409 J-.013 E.05395 G1 X-41.937 Y-5.899 F30000 G1 F16200 G1 X-41.937 Y-6.487 E.01951 G1 X-40.897 Y-6.487 E.0345 G3 X-39.791 Y-5.143 I-1.251 J2.156 E.05895 G3 X-37.504 Y-4.974 I.987 J2.191 E.07931 G2 X-37.114 Y-6.364 I-1.464 J-1.16 E.04918 G1 X-37.208 Y-6.487 E.00512 G1 X-35.656 Y-6.487 E.05149 G1 X-35.313 Y-6.231 E.01417 G1 X-35.313 Y-3.645 E.0858 G1 X-35.62 Y-3.416 E.01271 G2 X-36.178 Y-1.778 I1.479 J1.418 E.05926 G2 X-35.313 Y-.99 I1.799 J-1.107 E.03932 G1 X-35.313 Y1.596 E.0858 G1 X-35.62 Y1.826 E.01271 G2 X-36.178 Y3.464 I1.479 J1.418 E.05926 G2 X-35.313 Y4.251 I1.799 J-1.107 E.03932 G1 X-35.313 Y6.838 E.0858 G1 X-35.62 Y7.067 E.01271 G2 X-36.178 Y8.705 I1.479 J1.418 E.05926 G2 X-35.313 Y9.493 I1.799 J-1.107 E.03932 G1 X-35.313 Y12.079 E.0858 G1 X-35.62 Y12.308 E.01271 G2 X-36.178 Y13.946 I1.479 J1.418 E.05926 G2 X-35.313 Y14.734 I1.799 J-1.107 E.03932 G1 X-35.313 Y17.32 E.0858 G1 X-35.62 Y17.55 E.01271 G1 X-36.065 Y18.205 E.02626 G1 X-36.132 Y18.487 E.00962 G1 X-38.494 Y18.487 E.07834 G1 X-38.686 Y18.205 E.01131 G1 X-38.842 Y17.55 E.02235 G1 X-38.818 Y17.365 E.00619 G3 X-40.092 Y16.976 I.038 J-2.407 E.04479 G1 X-40.862 Y17.55 E.03183 G1 X-41.306 Y18.205 E.02626 G1 X-41.374 Y18.487 E.00962 G1 X-41.937 Y18.487 E.01868 G1 X-41.937 Y17.422 E.03533 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.937 Y18.487 G1 X-41.374 Y18.487 G1 X-41.306 Y18.205 G1 X-41.26 Y18.137 ;WIPE_END G1 X-40.745 Y10.522 Z10.4 F30000 G1 X-39.352 Y-10.052 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.758 Y-21.982 E.39574 G1 X-50.248 Y-21.982 E.34797 G1 X-50.248 Y-22.797 E.02703 G1 X-39.758 Y-22.797 E.34797 G1 X-39.748 Y-47.948 E.83431 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.575 E.39574 G1 X-50.655 Y-21.575 E.34797 G1 X-50.655 Y-23.204 E.05403 G1 X-40.165 Y-23.204 E.34797 G1 X-40.155 Y-48.355 E.83431 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-21.14 E.36657 G1 X-51.09 Y-21.14 E.32233 G1 X-51.09 Y-23.639 E.07678 G1 X-40.6 Y-23.639 E.32233 G1 X-40.59 Y-48.79 E.77283 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.959 Y-16.824 Z10.4 F30000 G1 X-39.556 Y-22.389 Z10.4 G1 Z10 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.450566 G1 F12000 G1 X-50.044 Y-22.389 E.34842 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.044 Y-22.389 ;WIPE_END G1 X-48.89 Y-29.975 Z10.4 F30000 G1 X-51.352 Y-52.052 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:10.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.737 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.273 Y-1.716 I.005 J1.739 E.0091 G1 X50.34 Y-1.709 E.00222 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.736 I-.662 J-1.608 E.20227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.313 Y-2.121 I.005 J2.147 E.01043 G1 X50.42 Y-2.111 E.00355 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.143 I-.818 J-1.985 E.25004 G1 X49.998 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00008 G1 X50.356 Y-2.554 E.01099 G1 X50.505 Y-2.539 E.00461 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.958 Y-2.585 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.356 Y-2.554 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.775 Y-1.877 ;WIPE_END G1 X50.205 Y.017 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.431185 G1 F15000 G1 X50.15 Y-.141 E.0053 G1 X49.921 Y-.191 E.00742 G1 X49.809 Y-.079 E.005 G1 X49.809 Y.079 E.005 G1 X49.921 Y.191 E.005 G1 X50.079 Y.191 E.005 G1 X50.196 Y.056 E.00564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.187 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.859 Y-.572 E.01013 G1 X49.623 Y-.451 E.00813 G1 X49.454 Y-.226 E.00865 G1 X49.415 Y.059 E.00885 G1 X49.509 Y.328 E.00876 G1 X49.724 Y.519 E.00884 G1 X50 Y.591 E.00877 G1 X50.278 Y.518 E.00884 G1 X50.491 Y.328 E.00877 G1 X50.586 Y.055 E.00889 G1 X50.546 Y-.226 E.00872 G1 X50.384 Y-.446 E.0084 G1 X50.223 Y-.522 E.00547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.219 Y-.918 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.875 Y-.958 E.01065 G1 X49.538 Y-.848 E.01088 G1 X49.314 Y-.686 E.00849 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G2 X50.951 Y-.189 I-1.017 J-.383 E.0175 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.257 Y-.904 E.00918 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.335 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.99 Y-1.348 E.0108 G1 X49.597 Y-1.281 E.01225 G1 X49.251 Y-1.122 E.01172 G1 X48.96 Y-.849 E.01225 G1 X48.754 Y-.516 E.01203 G1 X48.664 Y-.13 E.01219 G1 X48.677 Y.263 E.01208 G1 X48.817 Y.634 E.01218 G1 X49.046 Y.954 E.01209 G1 X49.368 Y1.184 E.01217 G1 X49.737 Y1.323 E.0121 G1 X50.133 Y1.336 E.01217 G1 X50.516 Y1.246 E.0121 G1 X50.853 Y1.037 E.01218 G1 X51.122 Y.749 E.01209 G1 X51.285 Y.388 E.0122 G1 X51.336 Y.129 E.0081 G1 X51.323 Y-.263 E.01205 G1 X51.18 Y-.64 E.01237 G1 X50.954 Y-.954 E.0119 G1 X50.66 Y-1.169 E.01118 G1 X50.373 Y-1.266 E.00932 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.66 Y-1.169 G1 X50.954 Y-.954 G1 X51.18 Y-.64 G1 X51.323 Y-.263 G1 X51.336 Y.129 G1 X51.307 Y.277 ;WIPE_END G1 X48.517 Y-6.827 Z10.6 F30000 G1 X30.752 Y-52.052 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z10.6 F30000 G1 X18.752 Y-10.052 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.432 Y-3.593 Z10.6 F30000 G1 X18.604 Y-.889 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.00416 G3 X18.2 Y-.846 I-.285 J-2.135 E.00935 G3 X17.919 Y-5.136 I.006 J-2.155 E.21479 G3 X18.757 Y-.92 I.277 J2.136 E.21484 G1 X18.643 Y-.897 E.00386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.525 Y-1.288 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.427 Y-1.272 E.00327 G3 X17.748 Y-4.687 I-.228 J-1.73 E.17423 G1 X17.972 Y-4.731 E.00758 G3 X18.651 Y-1.317 I.228 J1.73 E.17422 G1 X18.564 Y-1.297 E.00297 G1 X18.447 Y-1.722 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.69 E.00765 G3 X18.029 Y-4.299 I.004 J-1.311 E.121 G3 X18.539 Y-1.735 I.168 J1.299 E.12105 G1 X18.486 Y-1.728 E.00163 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.699 Y-1.789 G1 X17.545 Y-1.865 G1 X17.273 Y-2.073 G1 X17.16 Y-2.202 G1 X16.99 Y-2.497 G1 X16.934 Y-2.66 ;WIPE_END G1 X17.236 Y4.966 Z10.6 F30000 G1 X17.716 Y17.096 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.643 Y17.08 E.00249 G3 X17.919 Y12.864 I.562 J-2.08 E.19616 G3 X18.2 Y17.154 I.277 J2.136 E.23355 G3 X17.919 Y17.135 I.005 J-2.155 E.00935 G1 X17.755 Y17.103 E.00553 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.795 Y16.696 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.686 E.0016 G3 X17.972 Y13.269 I.456 J-1.686 E.15901 G3 X18.2 Y16.746 I.224 J1.732 E.18932 G3 X17.972 Y16.731 I.004 J-1.747 E.00758 G1 X17.835 Y16.704 E.00464 G1 X17.89 Y16.262 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.699 Y16.21 E.00608 G3 X18.029 Y13.701 I.504 J-1.21 E.10526 G3 X18.2 Y16.31 I.168 J1.299 E.13159 G3 X18.029 Y16.299 I.003 J-1.311 E.00527 G1 X17.928 Y16.272 E.0032 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.699 Y16.21 G1 X17.402 Y16.04 G1 X17.273 Y15.927 G1 X17.076 Y15.672 G1 X16.99 Y15.503 G1 X16.901 Y15.171 G1 X16.901 Y14.829 G1 X16.911 Y14.779 ;WIPE_END G1 X16.06 Y7.194 Z10.6 F30000 G1 X14.502 Y-6.698 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 M73 P72 R22 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X21.337 Y-6.025 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-6.487 E.01534 G1 X20.171 Y-6.487 E.03868 G1 X20.275 Y-6.364 E.00534 G3 X20.067 Y-4.726 I-1.638 J.624 E.05703 G1 X19.937 Y-4.599 E.00601 G2 X17.759 Y-5.319 I-1.738 J1.602 E.07947 G2 X16.986 Y-6.487 I-2.379 J.735 E.04709 G1 X14.93 Y-6.487 E.0682 G1 X15.034 Y-6.364 E.00534 G3 X14.826 Y-4.726 I-1.638 J.624 E.05703 G1 X14.713 Y-4.616 E.00522 G1 X14.713 Y-1.493 E.1036 G3 X15.034 Y-1.123 I-1.787 J1.87 E.01627 G3 X14.826 Y.515 I-1.638 J.624 E.05703 G1 X14.713 Y.625 E.00522 G1 X14.713 Y3.748 E.1036 G3 X15.034 Y4.119 I-1.787 J1.87 E.01627 G3 X14.826 Y5.757 I-1.638 J.624 E.05703 G1 X14.713 Y5.867 E.00522 G1 X14.713 Y8.99 E.1036 G3 X15.034 Y9.36 I-1.787 J1.87 E.01627 G3 X14.826 Y10.998 I-1.638 J.624 E.05703 G1 X14.713 Y11.108 E.00522 G1 X14.713 Y14.231 E.1036 G3 X15.034 Y14.601 I-1.787 J1.87 E.01627 G3 X14.826 Y16.239 I-1.638 J.624 E.05703 G1 X14.713 Y16.349 E.00522 G1 X14.713 Y18.487 E.07091 G1 X16.387 Y18.487 E.05552 G3 X17.152 Y17.115 I2 J.216 E.05352 G2 X19.184 Y17.147 I1.052 J-2.288 E.06939 G2 X18.994 Y17.55 I.489 J.477 E.01504 G1 X19.018 Y18.205 E.02175 G1 X19.152 Y18.487 E.01036 G1 X20.78 Y18.487 E.05401 G1 X20.238 Y13.802 F30000 G1 F16200 G2 X19.011 Y12.782 I-2.055 J1.224 E.05395 G3 X19.121 Y11.981 I.984 J-.274 E.02759 G3 X20.067 Y10.998 I5.641 J4.485 E.04533 G2 X20.402 Y9.688 I-1.361 J-1.046 E.04611 G1 X20.275 Y9.36 E.01165 G2 X19.328 Y8.377 I-5.641 J4.485 E.04533 G3 X18.994 Y7.067 I1.361 J-1.046 E.04611 G1 X19.121 Y6.739 E.01165 G3 X20.067 Y5.757 I5.641 J4.485 E.04533 G2 X20.402 Y4.446 I-1.361 J-1.046 E.04611 G1 X20.275 Y4.119 E.01165 G2 X19.328 Y3.136 I-5.641 J4.485 E.04533 G3 X18.994 Y1.826 I1.361 J-1.046 E.04611 G1 X19.121 Y1.498 E.01165 G3 X20.067 Y.515 I5.641 J4.485 E.04533 G1 X20.377 Y-.14 E.02405 G2 X19.989 Y-1.459 I-1.361 J-.316 E.0477 G3 X17.464 Y-.757 I-1.815 J-1.633 E.09175 G3 X17.781 Y.515 I-1.325 J1.005 E.04469 G1 X17.654 Y.843 E.01165 G3 X16.708 Y1.826 I-5.641 J-4.485 E.04533 G2 X16.373 Y3.136 I1.361 J1.046 E.04611 G1 X16.5 Y3.464 E.01165 G2 X17.446 Y4.446 I5.641 J-4.485 E.04533 G3 X17.781 Y5.757 I-1.361 J1.046 E.04611 G1 X17.654 Y6.084 E.01165 G3 X16.708 Y7.067 I-5.641 J-4.485 E.04533 G2 X16.373 Y8.377 I1.361 J1.046 E.04611 G1 X16.5 Y8.705 E.01165 G2 X17.446 Y9.688 I5.641 J-4.485 E.04533 G3 X17.781 Y10.998 I-1.361 J1.046 E.04611 G1 X17.654 Y11.326 E.01165 G3 X16.708 Y12.308 I-5.641 J-4.485 E.04533 G1 X16.397 Y12.963 E.02405 G1 X16.377 Y13.498 E.01774 G2 X15.834 Y14.998 I2.157 J1.629 E.05374 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X15.915 Y14.388 G1 X16.014 Y14.095 G1 X16.377 Y13.498 G1 X16.392 Y13.122 ;WIPE_END G1 X9.461 Y16.32 Z10.6 F30000 G1 X-2.945 Y22.045 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z10.6 F30000 G1 X-15.232 Y53.745 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.746 E.28695 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z10.6 F30000 G1 X-5.6 Y52.94 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42877 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48845 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290578 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.2 E.01237 G1 X-18.435 Y53.652 E.01448 G1 X-18.262 Y53.944 E.01042 G1 X-17.975 Y54.231 E.01248 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-18.191 Y53.145 I.146 J1.172 E.0568 G1 X-18.024 Y53.605 E.01502 G1 X-17.743 Y53.929 E.01319 G2 X-16.101 Y53.713 I.713 J-.929 E.05653 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.322 E.0098 G1 X-17.657 Y52.519 E.0094 G1 X-17.79 Y52.807 E.00977 G1 X-17.814 Y53.091 E.00874 G1 X-17.661 Y53.478 E.01277 G1 X-17.42 Y53.68 E.00968 G1 X-17.133 Y53.784 E.00937 G1 X-16.826 Y53.757 E.00948 G1 X-16.549 Y53.627 E.00941 G1 X-16.313 Y53.327 E.01173 G1 X-16.196 Y53.016 E.01021 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.319 Y52.714 E.0065 G1 X-17.426 Y52.905 E.00673 G1 X-17.41 Y53.127 E.00683 G1 X-17.315 Y53.291 E.00584 G1 X-17.134 Y53.394 E.00638 G1 X-16.924 Y53.393 E.00647 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z10.6 F30000 G1 X-3.671 Y51.454 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.601 E.01236 G1 X-2.226 Y52.224 E.01253 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.792 Y53.101 E.00948 G1 X-2.792 Y52.899 E.00622 G1 X-2.885 Y52.604 E.00949 G1 X-3.093 Y52.378 E.00944 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.166 Y52.948 E.00488 G1 X-3.247 Y52.752 E.00651 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.166 Y52.948 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-8.027 Y46.433 Z10.6 F30000 G1 X-37.768 Y-1.112 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.976 Y-1.011 E.00767 G3 X-38.8 Y-.846 I-.828 J-1.989 E.02805 G3 X-39.081 Y-5.136 I.005 J-2.155 E.21486 G3 X-37.724 Y-1.136 I.277 J2.136 E.19615 G1 X-37.733 Y-1.131 E.00034 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.948 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.132 Y-1.388 E.00679 G3 X-38.8 Y-1.254 I-.671 J-1.612 E.02274 G3 X-39.028 Y-4.731 I.004 J-1.747 E.17417 G3 X-37.914 Y-1.497 I.224 J1.732 E.15846 G1 X-38.145 Y-1.866 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-38.8 Y-1.69 I-.657 J-1.134 E.02107 G3 X-38.971 Y-4.299 I.003 J-1.311 E.12106 G3 X-38.111 Y-1.887 I.168 J1.299 E.1093 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.299 Y-1.789 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.727 Y-2.073 G1 X-39.878 Y-2.27 ;WIPE_END G1 X-40.156 Y5.357 Z10.6 F30000 G1 X-40.553 Y16.246 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.649 Y16.098 E.00585 G3 X-39.081 Y12.864 I1.854 J-1.098 E.14098 G3 X-38.8 Y17.154 I.277 J2.136 E.23355 G3 X-40.506 Y16.309 I.005 J-2.155 E.06542 G1 X-40.529 Y16.278 E.00129 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.215 Y16.02 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.298 Y15.892 E.00507 G3 X-39.028 Y13.269 I1.502 J-.892 E.11434 G3 X-38.8 Y16.746 I.224 J1.732 E.18932 G3 X-40.183 Y16.061 I.004 J-1.747 E.05303 G1 X-40.19 Y16.052 E.0004 G1 X-39.851 Y15.765 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.923 Y15.671 E.00363 G3 X-38.971 Y13.701 I1.126 J-.671 E.07956 G3 X-38.8 Y16.31 I.168 J1.299 E.13159 G3 X-39.725 Y15.925 I.003 J-1.311 E.0316 G1 X-39.827 Y15.797 E.00503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.923 Y15.671 G1 X-40.01 Y15.503 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.661 G1 X-40.011 Y14.499 G1 X-39.84 Y14.202 G1 X-39.641 Y14.003 ;WIPE_END G1 X-38.006 Y6.548 Z10.6 F30000 G1 X-35.102 Y-6.698 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-36.503 Y-2.449 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-37.376 Y-1.113 I-2.341 J-.576 E.05396 G1 X-37.253 Y-.795 E.0113 G3 X-37.587 Y.515 I-1.696 J.265 E.04611 G2 X-38.534 Y1.498 I4.695 J5.468 E.04533 G1 X-38.661 Y1.826 E.01165 G2 X-38.326 Y3.136 I1.696 J.265 E.04611 G3 X-37.379 Y4.119 I-4.695 J5.468 E.04533 G1 X-37.253 Y4.446 E.01165 G3 X-37.587 Y5.757 I-1.696 J.265 E.04611 G2 X-38.534 Y6.739 I4.695 J5.468 E.04533 G1 X-38.661 Y7.067 E.01165 G2 X-38.326 Y8.377 I1.696 J.265 E.04611 G3 X-37.379 Y9.36 I-4.695 J5.468 E.04533 G1 X-37.253 Y9.688 E.01165 G3 X-37.587 Y10.998 I-1.696 J.265 E.04611 G2 X-38.534 Y11.981 I4.695 J5.468 E.04533 G2 X-38.648 Y12.645 I.713 J.465 E.02299 G2 X-40.998 Y14.131 I-.152 J2.361 E.09859 G3 X-41.281 Y13.619 I.602 J-.667 E.01979 G3 X-40.947 Y12.308 I1.696 J-.265 E.04611 G2 X-40 Y11.326 I-4.695 J-5.468 E.04533 G1 X-39.873 Y10.998 E.01165 G2 X-40.208 Y9.688 I-1.696 J-.265 E.04611 G3 X-41.154 Y8.705 I4.695 J-5.468 E.04533 G1 X-41.281 Y8.377 E.01165 G3 X-40.947 Y7.067 I1.696 J-.265 E.04611 G2 X-40 Y6.084 I-4.695 J-5.468 E.04533 G1 X-39.873 Y5.757 E.01165 G2 X-40.208 Y4.446 I-1.696 J-.265 E.04611 G3 X-41.154 Y3.464 I4.695 J-5.468 E.04533 G1 X-41.281 Y3.136 E.01165 G3 X-40.947 Y1.826 I1.696 J-.265 E.04611 G2 X-40 Y.843 I-4.695 J-5.468 E.04533 G1 X-39.873 Y.515 E.01165 G2 X-40.208 Y-.795 I-1.696 J-.265 E.04611 G3 X-41.154 Y-1.778 I4.695 J-5.468 E.04533 G1 X-41.281 Y-2.105 E.01165 G1 X-41.257 Y-2.76 E.02175 G2 X-41.085 Y-3.612 I-3.312 J-1.111 E.0289 G3 X-40.651 Y-4.47 I3.762 J1.366 E.03196 G1 X-41.937 Y-6.127 F30000 G1 F16200 G1 X-41.937 Y-6.487 E.01194 G1 X-40.669 Y-6.487 E.04207 G3 X-39.887 Y-5.096 I-1.231 J1.607 E.05439 G3 X-37.478 Y-4.956 I1.086 J2.106 E.08397 G2 X-37.483 Y-6.487 I-1.059 J-.762 E.05426 G1 X-35.313 Y-6.487 E.07199 G1 X-35.313 Y-3.799 E.08915 G2 X-35.913 Y-1.778 I.976 J1.389 E.07547 G2 X-35.313 Y-1.134 I3.686 J-2.833 E.02924 G1 X-35.313 Y1.442 E.08545 G2 X-35.913 Y3.464 I.976 J1.389 E.07547 G2 X-35.313 Y4.107 I3.686 J-2.834 E.02924 G1 X-35.313 Y6.683 E.08545 G2 X-35.913 Y8.705 I.976 J1.389 E.07547 G2 X-35.313 Y9.349 I3.686 J-2.833 E.02924 G1 X-35.313 Y11.925 E.08545 G2 X-35.913 Y13.946 I.976 J1.389 E.07547 G2 X-35.313 Y14.59 I3.686 J-2.833 E.02924 G1 X-35.313 Y17.166 E.08545 G2 X-36.026 Y18.487 I1.248 J1.527 E.05108 G1 X-38.503 Y18.487 E.08215 G1 X-38.636 Y18.205 E.01036 G1 X-38.661 Y17.55 E.02175 G1 X-38.584 Y17.352 E.00704 G3 X-40.277 Y16.894 I-.038 J-3.222 E.05891 G1 X-40.947 Y17.55 E.03108 G1 X-41.257 Y18.205 E.02405 G1 X-41.267 Y18.487 E.00937 G1 X-41.937 Y18.487 E.02221 G1 X-41.937 Y17.528 E.03181 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-41.937 Y18.487 G1 X-41.267 Y18.487 G1 X-41.257 Y18.205 G1 X-41.219 Y18.124 ;WIPE_END G1 X-40.714 Y10.508 Z10.6 F30000 G1 X-39.352 Y-10.052 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.165 Y-21.882 E.40593 G1 X-50.655 Y-21.882 E.34797 G1 X-50.655 Y-22.897 E.03365 G1 X-40.165 Y-22.897 E.34797 G1 X-40.155 Y-48.355 E.8445 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-21.447 E.37601 G1 X-51.09 Y-21.447 E.32233 G1 X-51.09 Y-23.332 E.05791 G1 X-40.6 Y-23.332 E.32233 G1 X-40.59 Y-48.79 E.78227 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.192 Y-16.837 Z10.6 F30000 G1 X-39.961 Y-22.389 Z10.6 G1 Z10.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.650376 G1 F12000 G1 X-50.451 Y-22.389 E.51925 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.451 Y-22.389 ;WIPE_END G1 X-49.194 Y-29.986 Z10.6 F30000 G1 X-51.352 Y-52.052 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:10.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.737 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.27 Y-1.716 I.005 J1.739 E.00899 G1 X50.34 Y-1.709 E.00233 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.736 I-.662 J-1.608 E.20227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.31 Y-2.121 I.005 J2.147 E.01031 G1 X50.42 Y-2.111 E.00366 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.143 I-.818 J-1.985 E.25004 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.353 Y-2.554 E.01089 G1 X50.505 Y-2.539 E.00471 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.353 Y-2.554 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.205 Y.017 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.431174 G1 F15000 G1 X50.15 Y-.141 E.0053 G1 X49.921 Y-.191 E.00742 G1 X49.809 Y-.079 E.005 G1 X49.809 Y.079 E.005 G1 X49.921 Y.191 E.005 G1 X50.079 Y.191 E.005 G1 X50.196 Y.056 E.00564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.187 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.859 Y-.572 E.01013 G1 X49.623 Y-.451 E.00814 G1 X49.454 Y-.226 E.00865 G1 X49.415 Y.059 E.00885 G1 X49.509 Y.328 E.00876 G1 X49.724 Y.519 E.00884 G1 X50 Y.591 E.00877 G1 X50.278 Y.518 E.00884 G1 X50.491 Y.328 E.00877 G1 X50.586 Y.055 E.00889 G1 X50.546 Y-.226 E.00872 G1 X50.384 Y-.446 E.0084 G1 X50.223 Y-.522 E.00546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.219 Y-.917 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.875 Y-.958 E.01065 G1 X49.538 Y-.848 E.01088 G1 X49.314 Y-.686 E.00849 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G2 X50.951 Y-.189 I-1.017 J-.383 E.0175 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.257 Y-.904 E.00918 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.335 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.99 Y-1.348 E.0108 G1 X49.597 Y-1.281 E.01225 G1 X49.251 Y-1.122 E.01172 G1 X48.96 Y-.849 E.01225 G1 X48.754 Y-.516 E.01203 G1 X48.664 Y-.13 E.01219 G1 X48.677 Y.263 E.01208 G1 X48.817 Y.634 E.01218 G1 X49.046 Y.954 E.0121 G1 X49.368 Y1.184 E.01217 G1 X49.737 Y1.323 E.0121 G1 X50.133 Y1.336 E.01217 G1 X50.516 Y1.246 E.0121 G1 X50.853 Y1.037 E.01218 G1 X51.122 Y.749 E.01209 G1 X51.285 Y.388 E.0122 G1 X51.336 Y.129 E.0081 G1 X51.323 Y-.263 E.01205 G1 X51.18 Y-.64 E.01237 G1 X50.954 Y-.954 E.0119 G1 X50.66 Y-1.169 E.01118 G1 X50.373 Y-1.266 E.00932 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.66 Y-1.169 G1 X50.954 Y-.954 G1 X51.18 Y-.64 G1 X51.323 Y-.263 G1 X51.336 Y.129 G1 X51.307 Y.277 ;WIPE_END G1 X48.517 Y-6.827 Z10.8 F30000 G1 X30.752 Y-52.052 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z10.8 F30000 G1 X18.752 Y-10.052 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.416 Y-3.592 Z10.8 F30000 G1 X18.583 Y-.884 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.869 E.00343 G3 X17.642 Y-5.081 I-.281 J-2.134 E.21492 G1 X17.919 Y-5.136 E.00935 G3 X18.756 Y-.924 I.281 J2.134 E.21492 G1 X18.622 Y-.893 E.00457 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.503 Y-1.284 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.427 Y-1.272 E.00255 G3 X17.748 Y-4.687 I-.228 J-1.73 E.17423 G1 X17.972 Y-4.731 E.00758 G3 X18.651 Y-1.317 I.228 J1.73 E.17422 G1 X18.542 Y-1.292 E.00369 G1 X18.409 Y-1.711 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.704 E.00122 G3 X17.861 Y-4.266 I-.171 J-1.298 E.1211 G1 X18.029 Y-4.299 E.00527 G3 X18.702 Y-1.792 I.171 J1.298 E.1158 G1 X18.448 Y-1.722 E.00809 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.704 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.273 Y-2.073 G1 X17.074 Y-2.332 G1 X16.99 Y-2.497 G1 X16.935 Y-2.7 ;WIPE_END G1 X17.227 Y4.927 Z10.8 F30000 G1 X17.692 Y17.091 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.643 Y17.08 E.00167 G3 X17.919 Y12.864 I.562 J-2.08 E.19616 G3 X18.2 Y17.154 I.277 J2.136 E.23355 G3 X17.919 Y17.135 I.005 J-2.155 E.00935 G1 X17.731 Y17.098 E.00634 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.771 Y16.692 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.748 Y16.686 E.00079 G3 X17.972 Y13.269 I.456 J-1.686 E.15901 G3 X18.2 Y16.746 I.224 J1.732 E.18932 G3 X17.972 Y16.731 I.004 J-1.747 E.00758 G1 X17.811 Y16.699 E.00546 G1 X17.867 Y16.256 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.699 Y16.21 E.00537 G3 X18.029 Y13.701 I.504 J-1.21 E.10526 G3 X18.2 Y16.31 I.168 J1.299 E.13159 G3 X18.029 Y16.299 I.003 J-1.311 E.00527 G1 X17.906 Y16.266 E.00391 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.699 Y16.21 G1 X17.402 Y16.04 G1 X17.273 Y15.927 G1 X17.074 Y15.668 G1 X16.99 Y15.503 G1 X16.901 Y15.171 G1 X16.901 Y14.829 G1 X16.915 Y14.756 ;WIPE_END G1 X16.062 Y7.171 Z10.8 F30000 G1 X14.502 Y-6.698 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X21.337 Y-6.265 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-6.487 E.00737 G1 X19.931 Y-6.487 E.04665 G1 X20.261 Y-6.036 E.01853 G3 X20.165 Y-4.726 I-1.498 J.549 E.04492 G1 X19.999 Y-4.529 E.00855 G2 X17.724 Y-5.312 I-1.8 J1.53 E.08375 G2 X17.166 Y-6.487 I-1.478 J-.017 E.04467 G1 X14.713 Y-6.487 E.08136 G1 X15.02 Y-6.036 E.01808 G3 X14.924 Y-4.726 I-1.498 J.549 E.04492 G1 X14.713 Y-4.475 E.01087 G1 X14.713 Y-1.213 E.10821 G1 X15.02 Y-.795 E.01719 G3 X14.924 Y.515 I-1.498 J.549 E.04492 G1 X14.713 Y.766 E.01087 G1 X14.713 Y4.028 E.10821 G1 X15.02 Y4.446 E.01719 G3 X14.924 Y5.757 I-1.498 J.549 E.04492 G1 X14.713 Y6.007 E.01087 G1 X14.713 Y9.27 E.10821 G1 X15.02 Y9.688 E.01719 G3 X14.924 Y10.998 I-1.498 J.549 E.04492 G1 X14.713 Y11.249 E.01087 G1 X14.713 Y14.511 E.10821 G1 X15.02 Y14.929 E.01719 G3 X14.924 Y16.239 I-1.498 J.549 E.04492 G1 X14.713 Y16.49 E.01087 G1 X14.713 Y18.118 E.05401 G1 X20.495 Y15.562 F30000 G1 F16200 G3 X19.615 Y16.894 I-2.337 J-.588 E.05395 G1 X19.135 Y17.55 E.02698 G1 X19.04 Y18.205 E.02196 G1 X19.122 Y18.487 E.00974 G1 X16.46 Y18.487 E.0883 G3 X17.026 Y17.053 I1.704 J-.155 E.05303 G3 X16.48 Y13.381 I1.182 J-2.053 E.14154 G1 X16.42 Y12.963 E.014 G1 X16.609 Y12.308 E.02263 G1 X17.16 Y11.653 E.02839 G2 X17.545 Y9.688 I-1.137 J-1.243 E.07114 G1 X16.994 Y9.032 E.02839 G3 X16.609 Y7.067 I1.137 J-1.243 E.07114 G1 X17.16 Y6.412 E.02839 G2 X17.545 Y4.446 I-1.137 J-1.243 E.07114 G1 X16.994 Y3.791 E.02839 G3 X16.609 Y1.826 I1.137 J-1.243 E.07114 G1 X17.16 Y1.171 E.02839 G2 X17.566 Y-.722 I-1.108 J-1.227 E.06859 G2 X19.872 Y-1.326 I.628 J-2.309 E.08277 G3 X20.165 Y.515 I-1.019 J1.106 E.06671 G1 X19.615 Y1.171 E.02839 G2 X19.23 Y3.136 I1.137 J1.243 E.07114 G1 X19.781 Y3.791 E.02839 G3 X20.165 Y5.757 I-1.137 J1.243 E.07114 G1 X19.615 Y6.412 E.02839 G2 X19.23 Y8.377 I1.137 J1.243 E.07114 G1 X19.781 Y9.032 E.02839 G3 X20.165 Y10.998 I-1.137 J1.243 E.07114 G2 X19.135 Y12.308 I9.332 J8.401 E.05534 G1 X19.064 Y12.8 E.01648 G3 X20.263 Y13.852 I-.885 J2.22 E.05395 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.077 Y13.56 G1 X19.64 Y13.123 G1 X19.064 Y12.8 G1 X19.117 Y12.429 ;WIPE_END G1 X12.121 Y15.478 Z10.8 F30000 G1 X-2.945 Y22.045 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z10.8 F30000 G1 X-15.232 Y53.745 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28691 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z10.8 F30000 G1 X-5.6 Y52.94 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42876 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-19.504 Y51.722 I-2.67 J-.79 E.28499 G3 X-14.359 Y52.21 I2.474 J1.28 E.20337 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290581 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.33 Y46.164 Z10.8 F30000 G1 X-37.768 Y-1.112 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.976 Y-1.011 E.00768 G3 X-38.8 Y-.846 I-.828 J-1.989 E.02805 G3 X-39.081 Y-5.136 I.005 J-2.155 E.21486 G3 X-37.724 Y-1.136 I.277 J2.136 E.19615 G1 X-37.733 Y-1.131 E.00033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.948 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.132 Y-1.388 E.0068 G3 X-38.8 Y-1.254 I-.671 J-1.612 E.02274 G3 X-39.028 Y-4.731 I.004 J-1.747 E.17417 G3 X-37.913 Y-1.498 I.224 J1.732 E.15845 G1 X-38.145 Y-1.866 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-38.8 Y-1.69 I-.657 J-1.134 E.02107 G3 X-38.971 Y-4.299 I.003 J-1.311 E.12106 G3 X-38.111 Y-1.887 I.168 J1.299 E.1093 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.299 Y-1.789 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.3 Y-1.789 G1 X-39.598 Y-1.96 G1 X-39.727 Y-2.073 G1 X-39.878 Y-2.27 ;WIPE_END G1 X-40.156 Y5.357 Z10.8 F30000 G1 X-40.553 Y16.246 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.652 Y16.093 E.00603 G3 X-39.081 Y12.864 I1.857 J-1.093 E.14079 G3 X-38.8 Y17.154 I.277 J2.136 E.23355 G3 X-40.506 Y16.309 I.005 J-2.155 E.06542 G1 X-40.529 Y16.278 E.0013 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.215 Y16.019 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.3 Y15.887 E.00522 G3 X-39.028 Y13.269 I1.504 J-.887 E.11418 G3 X-38.8 Y16.746 I.224 J1.732 E.18932 G3 X-40.183 Y16.061 I.004 J-1.747 E.05303 G1 X-40.191 Y16.051 E.00042 G1 X-39.852 Y15.764 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.925 Y15.667 E.00371 G3 X-38.971 Y13.701 I1.128 J-.668 E.07942 G3 X-38.8 Y16.31 I.168 J1.299 E.13159 G3 X-39.725 Y15.925 I.003 J-1.311 E.0316 G1 X-39.828 Y15.795 E.00508 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.925 Y15.667 G1 X-40.01 Y15.503 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.661 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.639 Y14.002 ;WIPE_END G1 X-38.005 Y6.546 Z10.8 F30000 G1 X-35.102 Y-6.698 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-5.628 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-3.999 E.05401 G1 X-35.804 Y-3.416 E.02529 G2 X-35.419 Y-1.45 I1.522 J.723 E.07114 G1 X-35.313 Y-1.324 E.00546 G1 X-35.313 Y1.242 E.08513 G1 X-35.804 Y1.826 E.02529 G2 X-35.419 Y3.791 I1.522 J.723 E.07114 G1 X-35.313 Y3.917 E.00546 G1 X-35.313 Y6.483 E.08513 G1 X-35.804 Y7.067 E.02529 G2 X-35.419 Y9.032 I1.522 J.723 E.07114 G1 X-35.313 Y9.158 E.00546 G1 X-35.313 Y11.725 E.08513 G1 X-35.804 Y12.308 E.02529 G2 X-35.419 Y14.274 I1.522 J.723 E.07114 G1 X-35.313 Y14.4 E.00546 G1 X-35.313 Y16.966 E.08513 G1 X-35.804 Y17.55 E.02529 G1 X-35.993 Y18.205 E.02263 G1 X-35.953 Y18.487 E.00945 G1 X-38.532 Y18.487 E.08557 G1 X-38.614 Y18.205 E.00974 G1 X-38.52 Y17.55 E.02196 G1 X-38.35 Y17.317 E.00955 G3 X-40.387 Y16.748 I-.409 J-2.466 E.07246 G3 X-41.045 Y17.55 I-6.351 J-4.542 E.03442 G1 X-41.235 Y18.205 E.02263 G1 X-41.194 Y18.487 E.00945 G1 X-41.937 Y18.487 E.02464 G1 X-41.937 Y17.601 E.02937 G1 X-36.561 Y-2.255 F30000 G1 F16200 G3 X-37.544 Y-1 I-2.469 J-.921 E.05372 G1 X-37.393 Y-.795 E.00844 G3 X-38.04 Y1.171 I-1.822 J.49 E.07264 G1 X-38.52 Y1.826 E.02694 G2 X-37.874 Y3.791 I1.822 J.49 E.07264 G1 X-37.393 Y4.446 E.02694 G3 X-38.04 Y6.412 I-1.822 J.49 E.07264 G1 X-38.52 Y7.067 E.02694 G2 X-37.874 Y9.032 I1.822 J.49 E.07264 G1 X-37.393 Y9.688 E.02694 G3 X-38.04 Y11.653 I-1.822 J.49 E.07264 G1 X-38.52 Y12.308 E.02694 G1 X-38.569 Y12.649 E.01142 G2 X-40.908 Y13.936 I-.185 J2.433 E.0937 G1 X-41.14 Y13.619 E.01306 G3 X-40.494 Y11.653 I1.822 J-.49 E.07264 G1 X-40.014 Y10.998 E.02694 G2 X-40.66 Y9.032 I-1.822 J-.49 E.07264 G1 X-41.14 Y8.377 E.02694 G3 X-40.494 Y6.412 I1.822 J-.49 E.07264 G1 X-40.014 Y5.757 E.02694 G2 X-40.66 Y3.791 I-1.822 J-.49 E.07264 G1 X-41.14 Y3.136 E.02694 G3 X-40.494 Y1.171 I1.822 J-.49 E.07264 G1 X-40.014 Y.515 E.02694 G2 X-40.66 Y-1.45 I-1.822 J-.49 E.07264 G1 X-41.14 Y-2.105 E.02694 G1 X-41.235 Y-2.76 E.02196 G3 X-40.677 Y-4.44 I3.835 J.34 E.05924 G3 X-39.967 Y-5.057 I3.17 J2.934 E.03126 G1 X-39.92 Y-5.381 E.01086 G2 X-40.488 Y-6.487 I-1.532 J.088 E.04246 G1 X-37.724 Y-6.487 E.09171 G1 X-37.393 Y-6.036 E.01853 G1 X-37.299 Y-5.381 E.02196 G1 X-37.432 Y-4.925 E.01576 G3 X-36.516 Y-3.617 I-1.655 J2.132 E.05374 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-36.751 Y-4.183 G1 X-36.923 Y-4.44 G1 X-37.432 Y-4.925 G1 X-37.327 Y-5.286 ;WIPE_END G1 X-39.352 Y-10.052 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.6 Y-21.93 E.39086 G1 X-51.09 Y-21.93 E.32233 G1 X-51.09 Y-22.848 E.0282 G1 X-40.6 Y-22.848 E.32233 G1 X-40.59 Y-48.79 E.79712 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.436 Y-16.844 Z10.8 F30000 G1 X-40.383 Y-22.389 Z10.8 G1 Z10.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.525714 G1 F12000 G1 X-50.872 Y-22.389 E.41269 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-48.872 Y-22.389 ;WIPE_END G1 X-49.508 Y-29.995 Z10.8 F30000 G1 X-51.352 Y-52.052 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:10.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;10.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11 I-.529 J1.096 P1 F30000 G1 X50 Y-1.736 Z11 G1 Z10.6 M73 P72 R21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.267 Y-1.717 I.005 J1.739 E.00888 G1 X50.34 Y-1.709 E.00245 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.736 I-.662 J-1.608 E.20227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.307 Y-2.122 I.005 J2.147 E.0102 G1 X50.42 Y-2.111 E.00378 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.818 J-1.984 E.25003 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.349 Y-2.555 E.01078 G1 X50.505 Y-2.539 E.00481 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.349 Y-2.555 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.205 Y.017 Z11 F30000 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.431163 G1 F15000 G1 X50.15 Y-.141 E.0053 G1 X49.921 Y-.191 E.00742 G1 X49.809 Y-.079 E.005 G1 X49.809 Y.079 E.005 G1 X49.921 Y.191 E.005 G1 X50.079 Y.191 E.005 G1 X50.196 Y.056 E.00564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.187 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.859 Y-.572 E.01013 G1 X49.623 Y-.451 E.00814 G1 X49.454 Y-.226 E.00865 G1 X49.415 Y.059 E.00885 G1 X49.509 Y.328 E.00876 G1 X49.724 Y.519 E.00884 G1 X50 Y.591 E.00877 G1 X50.278 Y.518 E.00884 G1 X50.491 Y.328 E.00877 G1 X50.586 Y.055 E.00889 G1 X50.546 Y-.226 E.00872 G1 X50.384 Y-.446 E.0084 G1 X50.223 Y-.522 E.00546 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.219 Y-.917 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.875 Y-.958 E.01065 G1 X49.538 Y-.848 E.01088 G1 X49.314 Y-.686 E.00849 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G2 X50.951 Y-.189 I-1.017 J-.383 E.0175 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.257 Y-.904 E.00917 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.335 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.99 Y-1.348 E.01081 G1 X49.597 Y-1.281 E.01225 G1 X49.251 Y-1.122 E.01172 G1 X48.96 Y-.849 E.01225 G1 X48.754 Y-.516 E.01203 G1 X48.664 Y-.13 E.01219 G1 X48.677 Y.263 E.01208 G1 X48.817 Y.634 E.01218 G1 X49.046 Y.954 E.01209 G1 X49.368 Y1.184 E.01217 G1 X49.737 Y1.323 E.0121 G1 X50.133 Y1.336 E.01217 G1 X50.516 Y1.246 E.0121 G1 X50.853 Y1.037 E.01218 G1 X51.122 Y.749 E.01209 G1 X51.285 Y.388 E.0122 G1 X51.336 Y.129 E.0081 G1 X51.323 Y-.263 E.01205 G1 X51.18 Y-.64 E.01237 G1 X50.954 Y-.954 E.0119 G1 X50.661 Y-1.169 E.01118 G1 X50.373 Y-1.266 E.00932 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.661 Y-1.169 G1 X50.954 Y-.954 G1 X51.18 Y-.64 G1 X51.323 Y-.263 G1 X51.336 Y.129 G1 X51.307 Y.277 ;WIPE_END G1 X48.517 Y-6.827 Z11 F30000 G1 X30.752 Y-52.052 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z11 F30000 G1 X18.752 Y-10.052 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.398 Y-3.591 Z11 F30000 G1 X18.558 Y-.879 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.865 E.0026 G3 X18.2 Y-.846 I-.285 J-2.135 E.00935 G3 X17.919 Y-5.136 I.005 J-2.155 E.21486 G3 X18.757 Y-.92 I.277 J2.136 E.21484 G1 X18.597 Y-.887 E.00542 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.479 Y-1.279 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.428 Y-1.269 E.00172 G3 X18.2 Y-1.254 I-.231 J-1.731 E.00758 G3 X17.972 Y-4.731 I.004 J-1.747 E.17417 G3 X18.652 Y-1.314 I.224 J1.732 E.17416 G1 X18.518 Y-1.287 E.00453 G1 X18.401 Y-1.716 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.69 E.00623 G3 X18.029 Y-4.299 I.003 J-1.311 E.12106 G3 X18.539 Y-1.735 I.168 J1.299 E.12105 G1 X18.441 Y-1.721 E.00305 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.69 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.273 Y-2.073 G1 X17.065 Y-2.345 G1 X16.934 Y-2.661 G1 X16.925 Y-2.706 ;WIPE_END G1 X17.172 Y4.922 Z11 F30000 G1 X17.564 Y17.054 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.377 Y16.986 E.00659 G3 X17.642 Y12.919 I.822 J-1.989 E.17758 G1 X17.919 Y12.864 E.00935 G3 X17.644 Y17.077 I.281 J2.134 E.25227 G1 X17.602 Y17.065 E.00142 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.695 Y16.669 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.533 Y16.61 E.0057 G3 X17.748 Y13.313 I.667 J-1.612 E.14395 G1 X17.972 Y13.269 E.00758 G3 X17.749 Y16.683 I.228 J1.73 E.2045 G1 X17.733 Y16.679 E.00054 G1 X17.845 Y16.259 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.545 Y16.134 E.00997 G3 X18.029 Y13.701 I.658 J-1.134 E.09999 G3 X18.201 Y16.311 I.168 J1.299 E.13157 G3 X17.883 Y16.271 I.002 J-1.311 E.00988 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.545 Y16.134 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.829 G1 X16.919 Y14.735 ;WIPE_END G1 X16.064 Y7.151 Z11 F30000 G1 X14.502 Y-6.698 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 M73 P73 R21 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.113 Y-6.487 Z11 F30000 G1 Z10.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.04643 G1 X14.713 Y-6.258 E.00758 G3 X15.042 Y-4.726 I-1.365 J1.094 E.05391 G1 X14.713 Y-4.265 E.01879 G1 X14.713 Y-1.017 E.10773 G3 X15.042 Y.515 I-1.365 J1.094 E.05391 G1 X14.713 Y.977 E.01879 G1 X14.713 Y4.224 E.10773 G3 X15.042 Y5.757 I-1.365 J1.094 E.05391 G1 X14.713 Y6.218 E.01879 G1 X14.713 Y9.466 E.10773 G3 X15.042 Y10.998 I-1.365 J1.094 E.05391 G1 X14.713 Y11.459 E.01879 G1 X14.713 Y14.707 E.10773 G3 X15.042 Y16.239 I-1.365 J1.094 E.05391 G1 X14.713 Y16.7 E.01879 G1 X14.713 Y18.329 E.05401 G1 X20.495 Y16.496 F30000 G1 F16200 G3 X19.248 Y17.55 I-2.44 J-1.623 E.05486 G1 X19.038 Y18.205 E.02282 G1 X19.07 Y18.487 E.00942 G1 X16.508 Y18.487 E.08499 G1 X16.418 Y18.205 E.00983 G1 X16.492 Y17.55 E.02187 G1 X16.683 Y17.281 E.01094 G3 X16.423 Y12.915 I1.519 J-2.281 E.16799 G1 X16.492 Y12.308 E.02024 G1 X16.958 Y11.653 E.02669 G2 X17.662 Y9.688 I-1.186 J-1.533 E.07313 G1 X17.196 Y9.032 E.02669 G3 X16.492 Y7.067 I1.186 J-1.533 E.07313 G1 X16.958 Y6.412 E.02669 G2 X17.662 Y4.446 I-1.186 J-1.533 E.07313 G1 X17.196 Y3.791 E.02669 G3 X16.492 Y1.826 I1.186 J-1.533 E.07313 G3 X17.526 Y.515 I7.392 J4.774 E.05547 G1 X17.736 Y-.14 E.02282 G1 X17.718 Y-.303 E.00544 G2 X20.014 Y-.948 I.479 J-2.708 E.08185 G3 X20.283 Y.515 I-1.472 J1.026 E.05088 G1 X19.816 Y1.171 E.02669 G2 X19.112 Y3.136 I1.186 J1.533 E.07313 G1 X19.579 Y3.791 E.02669 G3 X20.283 Y5.757 I-1.186 J1.533 E.07313 G1 X19.816 Y6.412 E.02669 G2 X19.112 Y8.377 I1.186 J1.533 E.07313 G1 X19.579 Y9.032 E.02669 G3 X20.283 Y10.998 I-1.186 J1.533 E.07313 G3 X19.248 Y12.308 I-7.392 J-4.774 E.05547 G1 X19.204 Y12.448 E.00486 G3 X20.457 Y13.448 I-.962 J2.492 E.05402 G1 X20.524 Y15.748 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X20.326 Y16.215 E.01406 G1 X19.94 Y16.723 E.01767 G1 X19.434 Y17.114 E.01771 G1 X18.845 Y17.362 E.01771 G1 X18.217 Y17.448 E.01756 G1 X17.578 Y17.368 E.01786 G1 X16.986 Y17.126 E.01771 G1 X16.477 Y16.74 E.01771 G1 X16.086 Y16.234 E.01771 G1 X15.838 Y15.645 E.01771 G1 X15.752 Y15.012 E.01771 G1 X15.832 Y14.378 E.01771 G1 X16.074 Y13.786 E.01771 G1 X16.46 Y13.277 E.01771 G1 X16.953 Y12.895 E.01727 G1 X17.554 Y12.638 E.01813 G3 X18.204 Y12.552 I.956 J4.705 E.01816 G1 X18.822 Y12.632 E.01728 G1 X19.414 Y12.874 E.01771 G1 X19.923 Y13.26 E.01771 G1 X20.314 Y13.766 E.01771 G1 X20.514 Y14.229 E.01398 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.148 Y15 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.458031 G1 F15000 G1 X21.137 Y14.466 E.01805 G1 X20.972 Y14.362 E.00659 G1 X20.866 Y14.44 E.00444 ;WIDTH:0.443769 G1 X20.729 Y14.389 E.00476 ;WIDTH:0.436968 G1 X20.593 Y14.338 E.00468 G1 X20.723 Y14.665 E.01128 G1 X20.754 Y15.026 E.01164 G1 X20.69 Y15.483 E.01482 G1 X20.63 Y15.642 E.00547 ;WIDTH:0.447451 G1 X20.866 Y15.56 E.00823 G1 X20.987 Y15.64 E.00478 G1 X21.137 Y15.534 E.00606 G1 X21.147 Y15.04 E.01628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.524 Y-2.252 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X20.326 Y-1.785 E.01406 G1 X19.94 Y-1.277 E.01767 G1 X19.444 Y-.899 E.01727 G1 X18.842 Y-.647 E.01809 G1 X18.211 Y-.562 E.01765 G1 X17.579 Y-.642 E.01764 G1 X16.99 Y-.883 E.01764 G1 X16.483 Y-1.268 E.01764 G1 X16.094 Y-1.772 E.01764 G1 X15.847 Y-2.359 E.01764 G1 X15.762 Y-2.989 E.01764 G1 X15.842 Y-3.621 E.01764 G1 X16.083 Y-4.21 E.01764 G1 X16.468 Y-4.717 E.01764 G1 X16.958 Y-5.098 E.0172 G1 X17.558 Y-5.352 E.01806 G1 X18.172 Y-5.447 E.01721 G1 X18.822 Y-5.368 E.01813 G1 X19.414 Y-5.126 E.01772 G1 X19.923 Y-4.74 E.01771 G1 X20.314 Y-4.234 E.01771 G1 X20.514 Y-3.771 E.01398 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.148 Y-3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.458028 G1 F15000 G1 X21.137 Y-3.534 E.01806 G1 X20.972 Y-3.638 E.00659 G1 X20.866 Y-3.56 E.00444 ;WIDTH:0.443766 G1 X20.729 Y-3.611 E.00476 ;WIDTH:0.436967 G1 X20.593 Y-3.662 E.00468 G1 X20.724 Y-3.335 E.01128 G1 X20.754 Y-2.974 E.01164 G1 X20.69 Y-2.517 E.01482 G1 X20.63 Y-2.358 E.00547 ;WIDTH:0.447452 G1 X20.866 Y-2.44 E.00823 G1 X20.987 Y-2.36 E.00478 G1 X21.137 Y-2.466 E.00606 G1 X21.147 Y-2.96 E.01628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.337 Y-3.987 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-3.896 E.00303 G2 X20.745 Y-4.024 I-.36 J.232 E.0223 G2 X20.288 Y-4.773 I-2.383 J.939 E.02926 G2 X19.756 Y-6.487 I-1.735 J-.401 E.06238 G1 X17.341 Y-6.487 E.08011 G1 X17.662 Y-6.036 E.01835 G1 X17.701 Y-5.694 E.01143 G2 X16.277 Y-4.957 I.526 J2.761 E.05395 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X16.84 Y-5.383 G1 X17.701 Y-5.694 G1 X17.662 Y-6.036 G1 X17.643 Y-6.063 ;WIPE_END G1 X13.133 Y.094 Z11 F30000 G1 X-2.945 Y22.045 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z11 F30000 G1 X-15.232 Y53.745 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z11 F30000 G1 X-5.6 Y52.94 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.257 J1.929 E.17729 G3 X-5.368 Y53.745 I-.496 J-1.895 E.0928 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.169 J.901 E.42809 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.48844 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-18.304 Y55.475 I-2.672 J-.794 E.15044 G3 X-14.359 Y52.21 I1.273 J-2.478 E.33831 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290589 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y52.899 F30000 ;TYPE:Gap infill ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y52.95 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y52.899 F30000 G1 F12000 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-3.727 Y52.621 Z11 F30000 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.15 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.331 Y46.164 Z11 F30000 G1 X-37.773 Y-1.111 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.972 Y-1.013 E.00737 G3 X-38.8 Y-.846 I-.832 J-1.987 E.0282 G3 X-39.081 Y-5.136 I.005 J-2.155 E.21486 G3 X-37.711 Y-1.144 I.277 J2.136 E.19565 G1 X-37.737 Y-1.13 E.00098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.956 Y-1.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.13 Y-1.389 E.00643 G3 X-38.8 Y-1.254 I-.674 J-1.611 E.02283 G3 X-39.028 Y-4.731 I.004 J-1.747 E.17417 G3 X-37.916 Y-1.496 I.224 J1.732 E.15857 G1 X-37.921 Y-1.493 E.00016 G1 X-38.163 Y-1.867 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.298 Y-1.791 E.00476 G3 X-38.8 Y-1.69 I-.505 J-1.209 E.01583 G3 X-38.971 Y-4.299 I.003 J-1.311 E.12106 G3 X-38.003 Y-1.962 I.168 J1.299 E.10526 G1 X-38.129 Y-1.888 E.00448 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.298 Y-1.791 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.301 Y-1.789 G1 X-39.598 Y-1.96 G1 X-39.727 Y-2.073 G1 X-39.888 Y-2.282 ;WIPE_END G1 X-40.162 Y5.345 Z11 F30000 G1 X-40.553 Y16.245 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.656 Y16.088 E.00621 G3 X-39.358 Y12.919 I1.855 J-1.091 E.13138 G1 X-39.081 Y12.864 E.00935 G3 X-40.506 Y16.309 I.281 J2.134 E.29895 G1 X-40.53 Y16.278 E.00131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.215 Y16.019 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.303 Y15.883 E.00538 G3 X-39.028 Y13.269 I1.507 J-.883 E.11401 G3 X-38.797 Y16.747 I.224 J1.732 E.18923 G3 X-40.183 Y16.061 I.001 J-1.747 E.05313 G1 X-40.191 Y16.051 E.00043 G1 X-39.853 Y15.762 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.927 Y15.664 E.00379 G3 X-38.971 Y13.701 I1.13 J-.664 E.07929 G3 X-38.799 Y16.311 I.168 J1.299 E.13157 G3 X-39.725 Y15.925 I.002 J-1.311 E.03163 G1 X-39.829 Y15.794 E.00514 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.927 Y15.664 G1 X-40.01 Y15.502 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.066 Y14.661 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.638 Y14.001 ;WIPE_END G1 X-38.004 Y6.545 Z11 F30000 G1 X-35.102 Y-6.698 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-5.862 Z11 F30000 G1 Z10.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.234 E.05401 G2 X-35.921 Y-3.416 I3.99 J3.601 E.03388 G2 X-35.313 Y-1.561 I1.807 J.435 E.06818 G1 X-35.313 Y1.007 E.08518 G2 X-35.921 Y1.826 I3.99 J3.601 E.03388 G2 X-35.313 Y3.681 I1.807 J.435 E.06818 G1 X-35.313 Y6.249 E.08518 G2 X-35.921 Y7.067 I3.99 J3.601 E.03388 G2 X-35.313 Y8.922 I1.807 J.435 E.06818 G1 X-35.313 Y11.49 E.08518 G2 X-35.921 Y12.308 I3.99 J3.601 E.03388 G2 X-35.313 Y14.163 I1.807 J.435 E.06818 G1 X-35.313 Y16.731 E.08518 G2 X-35.921 Y17.55 I3.99 J3.601 E.03388 G1 X-35.995 Y18.205 E.02187 G1 X-35.905 Y18.487 E.00983 G1 X-38.584 Y18.487 E.08888 G3 X-38.461 Y17.723 I.911 J-.246 E.02644 G3 X-40.734 Y16.947 I-.339 J-2.722 E.08243 G1 X-41.163 Y17.55 E.02453 G1 X-41.237 Y18.205 E.02187 G1 X-41.146 Y18.487 E.00983 G1 X-41.937 Y18.487 E.02623 G1 X-41.937 Y17.649 E.02778 G1 X-41.13 Y14.265 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-40.926 Y13.786 E.01443 G1 X-40.54 Y13.277 E.01771 G1 X-40.034 Y12.886 E.01771 G1 X-39.445 Y12.638 E.01771 G3 X-38.796 Y12.552 I.956 J4.717 E.01814 G1 X-38.178 Y12.632 E.01728 G1 X-37.586 Y12.874 E.01771 G1 X-37.077 Y13.26 E.01771 G1 X-36.686 Y13.766 E.01771 G1 X-36.438 Y14.355 E.01771 G1 X-36.352 Y14.988 E.01771 G1 X-36.429 Y15.607 E.01727 G1 X-36.674 Y16.214 E.01813 G1 X-37.06 Y16.723 E.01772 G1 X-37.553 Y17.105 E.01727 G1 X-38.154 Y17.362 E.01813 G1 X-38.783 Y17.448 E.01757 G1 X-39.422 Y17.368 E.01786 G1 X-40.014 Y17.126 E.01771 G1 X-40.523 Y16.74 E.01771 G1 X-40.905 Y16.247 E.01727 G1 X-41.108 Y15.784 E.014 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.13 Y14.265 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.398727 G1 F15000 G1 X-41.253 Y14.348 E.00428 ;WIDTH:0.447896 G1 X-41.375 Y14.43 E.00487 G1 X-41.513 Y14.418 E.00456 G1 X-41.587 Y14.36 E.00311 G1 X-41.737 Y14.466 E.00606 G2 X-41.737 Y15.534 I12.893 J.534 E.03523 G1 X-41.572 Y15.638 E.00643 G1 X-41.466 Y15.56 E.00433 G1 X-41.23 Y15.642 E.00824 ;WIDTH:0.438856 G1 X-41.195 Y15.66 E.00126 G1 X-41.29 Y15.483 E.00647 G1 X-41.354 Y14.974 E.01654 G1 X-41.286 Y14.518 E.01489 ;WIDTH:0.43034 G1 X-41.219 Y14.408 E.00405 ;WIDTH:0.414533 G1 X-41.151 Y14.299 E.00389 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.937 Y13.705 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.937 Y14.104 E.01324 G3 X-41.345 Y13.976 I.36 J.232 E.0223 G1 X-41.341 Y13.962 E.00048 G3 X-41.074 Y13.472 I3.575 J1.629 E.01853 G3 X-40.696 Y11.653 I1.454 J-.647 E.0658 G1 X-40.128 Y10.998 E.02876 G2 X-40.459 Y9.032 I-1.463 J-.764 E.07098 G1 X-41.027 Y8.377 E.02876 G3 X-40.696 Y6.412 I1.463 J-.764 E.07098 G1 X-40.128 Y5.757 E.02876 G2 X-40.459 Y3.791 I-1.463 J-.764 E.07098 G1 X-41.027 Y3.136 E.02876 G3 X-40.696 Y1.171 I1.463 J-.764 E.07098 G1 X-40.128 Y.515 E.02876 G1 X-39.918 Y-.14 E.02282 G1 X-39.961 Y-.518 E.01263 G2 X-37.449 Y-.612 I1.166 J-2.458 E.08668 G1 X-37.297 Y-.14 E.01645 G1 X-37.371 Y.515 E.02187 G3 X-38.406 Y1.826 I-7.392 J-4.774 E.05547 G2 X-38.075 Y3.791 I1.463 J.764 E.07098 G1 X-37.507 Y4.446 E.02876 G3 X-37.838 Y6.412 I-1.463 J.764 E.07098 G1 X-38.406 Y7.067 E.02876 G2 X-38.075 Y9.032 I1.463 J.764 E.07098 G1 X-37.507 Y9.688 E.02876 G3 X-37.838 Y11.653 I-1.463 J.764 E.07098 G1 X-38.389 Y12.289 E.0279 G3 X-36.944 Y12.984 I-.432 J2.748 E.05396 G1 X-41.13 Y-3.735 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-40.926 Y-4.214 E.01443 G1 X-40.54 Y-4.723 E.01771 G1 X-40.034 Y-5.114 E.01771 G1 X-39.445 Y-5.362 E.01771 G3 X-38.796 Y-5.448 I.956 J4.717 E.01814 G1 X-38.178 Y-5.368 E.01728 G1 X-37.586 Y-5.126 E.01771 G1 X-37.077 Y-4.74 E.01771 G1 X-36.686 Y-4.234 E.01771 G1 X-36.438 Y-3.645 E.01771 G1 X-36.352 Y-3.012 E.01771 G1 X-36.434 Y-2.394 E.01727 G1 X-36.682 Y-1.79 E.01809 G1 X-37.064 Y-1.287 E.0175 G1 X-37.558 Y-.902 E.01735 G1 X-38.158 Y-.648 E.01806 G1 X-38.789 Y-.562 E.01765 G1 X-39.405 Y-.638 E.0172 G1 X-40.01 Y-.883 E.01806 G1 X-40.517 Y-1.268 E.01765 G1 X-40.898 Y-1.758 E.0172 G1 X-41.107 Y-2.214 E.0139 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.217 Y-2.371 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442013 G1 F15000 G1 X-41.323 Y-2.665 E.01015 G1 X-41.354 Y-3.026 E.01179 G1 X-41.286 Y-3.482 E.01501 ;WIDTH:0.430338 G1 X-41.208 Y-3.608 E.00468 ;WIDTH:0.409247 G1 X-41.13 Y-3.735 E.00443 G1 X-41.375 Y-3.57 E.00881 ;WIDTH:0.451408 G1 X-41.513 Y-3.582 E.00461 G1 X-41.587 Y-3.64 E.00313 G1 X-41.737 Y-3.534 E.00611 G2 X-41.737 Y-2.466 I12.895 J.534 E.03554 G1 X-41.572 Y-2.362 E.00649 G1 X-41.466 Y-2.44 E.00437 G1 X-41.255 Y-2.382 E.00727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.135 Y-4.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-39.931 Y-5.497 I2.36 J1.467 E.05396 G2 X-40.313 Y-6.487 I-1.083 J-.151 E.03676 G1 X-37.898 Y-6.487 E.08011 G3 X-37.307 Y-5.297 I-1.391 J1.433 E.04493 G2 X-38.847 Y-5.742 I-1.478 J2.227 E.05402 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-38.077 Y-5.647 G1 X-37.307 Y-5.297 G1 X-37.406 Y-5.662 ;WIPE_END G1 X-39.352 Y-10.052 Z11 F30000 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z11 F30000 G1 X-51.352 Y-52.052 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:10.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.736 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.263 Y-1.717 I.005 J1.739 E.00877 G1 X50.34 Y-1.709 E.00256 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.736 I-.662 J-1.608 E.20227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.303 Y-2.122 I.005 J2.146 E.01009 G1 X50.42 Y-2.111 E.00389 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.818 J-1.984 E.25003 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.346 Y-2.555 E.01068 G1 X50.505 Y-2.539 E.00492 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.346 Y-2.555 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.868 Y1.336 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F15000 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END G1 X43.631 Y-2.658 Z11.2 F30000 G1 X-51.352 Y-52.052 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z11.2 F30000 G1 X-39.352 Y-10.052 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-38.062 Y-1.982 Z11.2 F30000 G1 X-37.768 Y-1.112 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.976 Y-1.011 E.00769 G3 X-38.8 Y-.846 I-.828 J-1.989 E.02805 G3 X-39.081 Y-5.136 I.005 J-2.155 E.21486 G3 X-37.724 Y-1.136 I.277 J2.136 E.19615 G1 X-37.732 Y-1.132 E.00032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.948 Y-1.477 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.132 Y-1.388 E.00681 G3 X-38.8 Y-1.254 I-.671 J-1.612 E.02274 G3 X-39.028 Y-4.731 I.004 J-1.747 E.17417 G3 X-37.913 Y-1.498 I.224 J1.732 E.15844 G1 X-38.146 Y-1.867 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.139 Y-4.266 I-.654 J-1.134 E.13688 G1 X-38.971 Y-4.299 E.00527 G3 X-38.112 Y-1.888 I.171 J1.298 E.10935 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.8 Y-1.69 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.879 Y-2.27 ;WIPE_END G1 X-40.154 Y5.358 Z11.2 F30000 G1 X-40.547 Y16.254 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.659 Y16.083 E.00676 G3 X-39.358 Y12.919 I1.858 J-1.086 E.13119 G1 X-39.081 Y12.864 E.00935 G3 X-40.506 Y16.309 I.281 J2.134 E.29895 G1 X-40.524 Y16.286 E.00096 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.209 Y16.028 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.306 Y15.879 E.00591 G3 X-39.252 Y13.313 I1.506 J-.881 E.10636 G1 X-39.028 Y13.269 E.00758 G3 X-40.183 Y16.061 I.228 J1.73 E.24234 G1 X-40.185 Y16.06 E.00007 G1 X-39.84 Y15.797 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.009 Y15.501 E.01046 G3 X-39.139 Y13.734 I1.209 J-.503 E.0685 G1 X-38.971 Y13.701 E.00527 G3 X-39.815 Y15.826 I.171 J1.298 E.16729 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.009 Y15.501 G1 X-40.066 Y15.339 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.662 Y14.025 ;WIPE_END G1 X-38.022 Y6.57 Z11.2 F30000 G1 X-35.102 Y-6.698 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.313 Y-6.043 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.313 Y-4.415 E.05401 G2 X-35.952 Y-3.745 I2.456 J2.979 E.03078 G3 X-35.899 Y-2.519 I-2.735 J.731 E.04104 G2 X-35.313 Y-1.751 I1.355 J-.428 E.03268 G1 X-35.313 Y.826 E.08551 G2 X-36.068 Y1.826 I1.202 J1.693 E.04221 G2 X-35.313 Y3.49 I2.059 J.069 E.06281 G1 X-35.313 Y6.068 E.08551 G2 X-36.068 Y7.067 I1.202 J1.693 E.04221 G2 X-35.313 Y8.731 I2.059 J.069 E.06281 G1 X-35.313 Y11.309 E.08551 G2 X-36.068 Y12.308 I1.202 J1.693 E.04221 G2 X-35.313 Y13.973 I2.059 J.069 E.06281 G1 X-35.313 Y16.55 E.08551 G2 X-36.068 Y17.55 I1.202 J1.693 E.04221 G1 X-36.022 Y18.205 E.02179 G1 X-35.879 Y18.487 E.01049 G1 X-37.507 Y18.487 E.05401 G1 X-41.937 Y16.821 F30000 G1 F16200 G1 X-41.937 Y16.46 E.01199 G1 X-41.388 Y16.396 E.01831 G2 X-40.983 Y16.969 I2.749 J-1.518 E.02334 G2 X-41.31 Y17.55 I.614 J.728 E.02259 G1 X-41.263 Y18.205 E.02179 G1 X-41.12 Y18.487 E.01049 G1 X-38.663 Y18.487 E.08152 G3 X-38.501 Y17.926 I.746 J-.089 E.0199 G2 X-38.128 Y12.137 I-.295 J-2.925 E.27426 G2 X-37.224 Y10.998 I-1.3 J-1.96 E.04904 G2 X-37.603 Y9.688 I-1.742 J-.206 E.04647 G3 X-38.574 Y8.705 I3.583 J-4.51 E.04593 G1 X-38.689 Y8.377 E.01152 G3 X-38.31 Y7.067 I1.742 J-.206 E.04647 G2 X-37.34 Y6.084 I-3.583 J-4.51 E.04593 G1 X-37.224 Y5.757 E.01152 G2 X-37.603 Y4.446 I-1.742 J-.206 E.04647 G3 X-38.574 Y3.464 I3.583 J-4.51 E.04593 G1 X-38.689 Y3.136 E.01152 G3 X-38.31 Y1.826 I1.742 J-.206 E.04647 G2 X-37.34 Y.843 I-3.583 J-4.51 E.04593 G1 X-37.224 Y.515 E.01152 G1 X-37.271 Y-.14 E.02179 G1 X-37.408 Y-.41 E.01004 G3 X-39.882 Y-.264 I-1.397 J-2.628 E.08482 G1 X-39.891 Y-.14 E.00412 G1 X-40.224 Y.515 E.02437 G2 X-41.194 Y1.498 I3.583 J4.51 E.04593 G1 X-41.31 Y1.826 E.01152 G2 X-40.931 Y3.136 I1.742 J.206 E.04647 G3 X-39.96 Y4.119 I-3.583 J4.51 E.04593 G1 X-39.845 Y4.446 E.01152 G3 X-40.224 Y5.757 I-1.742 J.206 E.04647 G2 X-41.194 Y6.739 I3.583 J4.51 E.04593 G1 X-41.31 Y7.067 E.01152 G2 X-40.931 Y8.377 I1.742 J.206 E.04647 G3 X-39.96 Y9.36 I-3.583 J4.51 E.04593 G1 X-39.845 Y9.688 E.01152 G3 X-40.224 Y10.998 I-1.742 J.206 E.04647 G2 X-41.194 Y11.981 I3.583 J4.51 E.04593 G1 X-41.31 Y12.308 E.01152 G1 X-41.263 Y12.963 E.02179 G1 X-41.138 Y13.21 E.00919 G2 X-41.388 Y13.604 I5.08 J3.507 E.01548 G1 X-41.937 Y13.551 E.01828 G1 X-41.937 Y12.947 E.02002 G1 X-41.104 Y13.934 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.414551 G1 F15000 G1 X-40.817 Y13.459 E.0168 G1 X-40.498 Y13.111 E.01429 G1 X-40.093 Y12.805 E.0154 G1 X-39.483 Y12.547 E.02005 G1 X-38.835 Y12.453 E.01984 G1 X-38.165 Y12.534 E.02041 G1 X-37.548 Y12.782 E.02015 G1 X-37.017 Y13.182 E.02013 G1 X-36.607 Y13.705 E.02013 G1 X-36.352 Y14.319 E.02013 G1 X-36.263 Y14.976 E.02008 G1 X-36.343 Y15.634 E.02006 G1 X-36.591 Y16.248 E.02006 G1 X-36.989 Y16.777 E.02006 G1 X-37.511 Y17.185 E.02006 G1 X-38.121 Y17.444 E.02006 G1 X-38.773 Y17.537 E.01995 G1 X-39.434 Y17.457 E.02016 G1 X-40.048 Y17.209 E.02006 G1 X-40.577 Y16.811 E.02006 G1 X-40.982 Y16.299 E.01976 G1 X-41.087 Y16.096 E.0069 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.104 Y13.934 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.464079 G1 F15000 G1 X-41.254 Y14.037 E.00626 G1 X-41.477 Y14.06 E.00769 G1 X-41.724 Y13.978 E.00893 G2 X-41.725 Y16.022 I38.38 J1.031 E.07017 G1 X-41.441 Y15.931 E.01025 G3 X-41.106 Y16.061 I.044 J.384 E.01283 G1 X-41.294 Y15.639 E.01586 G1 X-41.354 Y15.026 E.02114 G1 X-41.294 Y14.361 E.0229 G1 X-41.12 Y13.97 E.01468 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.104 Y-4.066 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.414219 G1 F15000 G1 X-40.819 Y-4.539 E.0167 G1 X-40.35 Y-5.01 E.0201 G1 X-39.777 Y-5.343 E.02005 G1 X-39.131 Y-5.517 E.02024 G1 X-38.785 Y-5.547 E.01051 G1 X-38.165 Y-5.466 E.01893 G1 X-37.551 Y-5.212 E.02012 G1 X-37.023 Y-4.811 E.02007 G1 X-36.615 Y-4.289 E.02004 G1 X-36.356 Y-3.679 E.02004 G1 X-36.263 Y-3.024 E.02004 G1 X-36.343 Y-2.366 E.02004 G1 X-36.591 Y-1.752 E.02004 G1 X-36.989 Y-1.223 E.02004 G1 X-37.511 Y-.815 E.02004 G1 X-38.121 Y-.556 E.02004 G1 X-38.776 Y-.463 E.02004 G1 X-39.434 Y-.543 E.02004 G1 X-40.048 Y-.791 E.02004 G1 X-40.577 Y-1.189 E.02004 G1 X-40.982 Y-1.701 E.01975 G1 X-41.087 Y-1.904 E.0069 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.106 Y-1.939 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.464177 G1 F15000 G1 X-41.294 Y-2.361 E.01586 G1 X-41.354 Y-2.974 E.02114 G1 X-41.294 Y-3.639 E.02291 G1 X-41.104 Y-4.066 E.01605 G1 X-41.254 Y-3.963 E.00626 G1 X-41.477 Y-3.94 E.00769 G1 X-41.724 Y-4.022 E.00894 G2 X-41.725 Y-1.978 I38.375 J1.031 E.07018 G1 X-41.441 Y-2.069 E.01025 G1 X-41.261 Y-2.047 E.00622 G1 X-41.138 Y-1.962 E.00511 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.149 Y-4.774 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-41.144 Y-4.782 E.00031 G3 X-39.866 Y-5.742 I2.422 J1.893 E.05365 G2 X-40.063 Y-6.487 I-.912 J-.157 E.02637 G1 X-38.082 Y-6.487 E.06571 G3 X-37.366 Y-5.57 I-.911 J1.45 E.03938 G1 X-37.53 Y-5.65 E.00604 G2 X-38.931 Y-5.937 I-1.274 J2.664 E.04791 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-38.051 Y-5.847 G1 X-37.53 Y-5.65 G1 X-37.366 Y-5.57 G1 X-37.537 Y-5.905 ;WIPE_END G1 X-34.863 Y1.244 Z11.2 F30000 G1 X-15.232 Y53.745 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z11.2 F30000 G1 X-5.6 Y52.94 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.1332 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290595 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y52.899 F30000 ;TYPE:Gap infill ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y52.95 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y52.899 F30000 G1 F12000 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-3.727 Y52.621 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z11.2 F30000 G1 X-2.945 Y22.045 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.852 Y17.186 Z11.2 F30000 G1 X18.554 Y-.879 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.869 E.00245 G3 X17.642 Y-5.081 I-.281 J-2.134 E.21492 G1 X17.919 Y-5.136 E.00935 G3 X18.756 Y-.924 I.281 J2.134 E.21492 G1 X18.593 Y-.887 E.00556 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.474 Y-1.278 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.427 Y-1.272 E.00156 G3 X17.748 Y-4.687 I-.228 J-1.73 E.17422 G1 X17.972 Y-4.731 E.00758 G3 X18.651 Y-1.317 I.228 J1.73 E.17423 G1 X18.513 Y-1.286 E.00468 G1 X18.397 Y-1.715 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.2 Y-1.692 E.00609 G3 X17.861 Y-4.266 I0 J-1.309 E.11584 G1 X18.029 Y-4.299 E.00527 G3 X18.538 Y-1.737 I.171 J1.298 E.1211 G1 X18.436 Y-1.721 E.00317 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.2 Y-1.692 G1 X18.029 Y-1.701 G1 X17.699 Y-1.789 G1 X17.545 Y-1.865 G1 X17.273 Y-2.073 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.934 Y-2.661 G1 X16.928 Y-2.71 ;WIPE_END G1 X17.156 Y4.919 Z11.2 F30000 G1 X17.52 Y17.039 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.377 Y16.986 E.00504 G3 X17.642 Y12.919 I.822 J-1.989 E.17758 G1 X17.919 Y12.864 E.00935 G3 X17.644 Y17.077 I.281 J2.134 E.25227 G1 X17.558 Y17.051 E.00296 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.651 Y16.654 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.533 Y16.61 E.00416 G3 X17.748 Y13.313 I.667 J-1.612 E.14395 G1 X17.972 Y13.269 E.00758 G3 X17.749 Y16.683 I.228 J1.73 E.2045 G1 X17.689 Y16.665 E.00208 G1 X17.781 Y16.233 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.7 Y16.208 E.00263 G3 X17.861 Y13.734 I.5 J-1.21 E.10006 G1 X18.029 Y13.701 E.00527 G3 X18.029 Y16.297 I.171 J1.298 E.13688 G1 X17.82 Y16.243 E.00664 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.7 Y16.208 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X17.065 Y15.655 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.829 G1 X16.933 Y14.669 ;WIPE_END G1 X16.07 Y7.086 Z11.2 F30000 G1 X14.502 Y-6.698 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.982 Y-6.487 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X14.713 Y-6.487 E.04209 G1 X14.713 Y-6.127 E.01193 G1 X15.142 Y-5.381 E.02856 G3 X14.713 Y-3.989 I-1.324 J.354 E.05093 G1 X14.713 Y-.886 E.10295 G1 X15.142 Y-.14 E.02856 G3 X14.713 Y1.252 I-1.324 J.354 E.05093 G1 X14.713 Y4.355 E.10295 G1 X15.142 Y5.101 E.02856 G3 X14.713 Y6.493 I-1.324 J.354 E.05093 G1 X14.713 Y9.597 E.10295 G1 X15.142 Y10.343 E.02856 G3 X14.713 Y11.734 I-1.324 J.354 E.05093 G1 X14.713 Y14.838 E.10295 G1 X15.142 Y15.584 E.02856 G3 X14.713 Y16.976 I-1.324 J.354 E.05093 G1 X14.713 Y18.487 E.05013 G1 X14.83 Y18.487 E.00389 G1 X17.915 Y17.927 F30000 G1 F16200 G3 X16.418 Y17.344 I.31 J-3.01 E.05393 G1 X16.345 Y17.55 E.00724 G1 X16.391 Y18.205 E.02179 G1 X16.534 Y18.487 E.01049 G1 X18.992 Y18.487 E.08152 G3 X19.242 Y17.75 I.999 J-.071 E.02653 G2 X20.535 Y16.794 I-1.011 J-2.718 E.05403 G1 X20.501 Y16.071 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.412849 G1 F15000 G1 X20.217 Y16.541 E.01656 G1 X19.898 Y16.889 E.01423 G1 X19.493 Y17.195 E.01532 G1 X18.881 Y17.448 E.01995 G1 X18.227 Y17.537 E.01989 G1 X17.566 Y17.457 E.02007 G1 X16.952 Y17.209 E.01997 G1 X16.423 Y16.811 E.01997 G1 X16.015 Y16.289 E.01997 G1 X15.756 Y15.679 E.01997 G1 X15.663 Y15.024 E.01997 G1 X15.743 Y14.366 E.01997 G1 X15.991 Y13.752 E.01997 G1 X16.389 Y13.223 E.01997 G1 X16.911 Y12.815 E.01997 G1 X17.521 Y12.556 E.01997 G1 X18.165 Y12.453 E.01968 G1 X18.835 Y12.534 E.02032 G1 X19.452 Y12.782 E.02006 G1 X19.983 Y13.182 E.02004 G1 X20.393 Y13.705 E.02004 G1 X20.491 Y13.908 E.00678 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.508 Y13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.464121 G1 F15000 G1 X20.694 Y14.361 E.01568 G1 X20.754 Y14.974 E.02114 G1 X20.694 Y15.639 E.0229 G1 X20.501 Y16.071 E.01624 G1 X20.654 Y15.963 E.00643 G1 X20.877 Y15.94 E.00769 G1 X21.124 Y16.022 E.00894 G2 X21.125 Y13.978 I-38.384 J-1.031 E.07017 G1 X20.841 Y14.069 E.01025 G3 X20.542 Y13.966 I-.048 J-.346 E.01127 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.605 Y13.309 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X19.359 Y12.295 I-2.464 J1.754 E.05395 G2 X20.315 Y11.326 I-3.534 J-4.442 E.04526 G2 X20.051 Y9.688 I-1.678 J-.57 E.05727 G3 X19.081 Y8.705 I3.583 J-4.51 E.04593 G3 X19.344 Y7.067 I1.678 J-.57 E.05727 G2 X20.315 Y6.084 I-3.583 J-4.51 E.04593 G2 X20.051 Y4.446 I-1.678 J-.57 E.05727 G3 X19.081 Y3.464 I3.583 J-4.51 E.04593 G3 X19.344 Y1.826 I1.678 J-.57 E.05727 G2 X20.315 Y.843 I-3.583 J-4.51 E.04593 G2 X20.08 Y-.739 I-1.64 J-.565 E.05515 G3 X17.74 Y-.095 I-1.87 J-2.22 E.08303 G1 X17.431 Y.515 E.0227 G2 X16.46 Y1.498 I3.583 J4.51 E.04593 G2 X16.723 Y3.136 I1.678 J.57 E.05727 G3 X17.694 Y4.119 I-3.583 J4.51 E.04593 G3 X17.431 Y5.757 I-1.678 J.57 E.05727 G2 X16.46 Y6.739 I3.583 J4.51 E.04593 G2 X16.723 Y8.377 I1.678 J.57 E.05727 G3 X17.694 Y9.36 I-3.583 J4.51 E.04593 G3 X17.431 Y10.998 I-1.678 J.57 E.05727 G1 X16.734 Y11.653 E.03173 G2 X16.372 Y12.694 I.691 J.824 E.03839 G3 X17.829 Y12.079 I1.892 J2.447 E.05305 G1 X17.856 Y12.077 E.00091 G1 X20.501 Y-1.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.430707 G1 F15000 G1 X20.217 Y-1.459 E.01736 G1 X19.898 Y-1.111 E.01491 G1 X19.493 Y-.805 E.01606 G1 X18.883 Y-.547 E.02092 G1 X18.225 Y-.453 E.02101 G1 X17.574 Y-.532 E.0207 G1 X17.106 Y-.71 E.01584 G1 X16.661 Y-.981 E.01645 G1 X16.19 Y-1.45 E.021 G1 X15.857 Y-2.023 E.02094 G1 X15.684 Y-2.662 E.02094 G1 X15.682 Y-3.325 E.02094 G1 X15.853 Y-3.965 E.02094 G1 X16.184 Y-4.543 E.02103 G1 X16.502 Y-4.889 E.01486 G1 X16.907 Y-5.195 E.01607 G1 X17.517 Y-5.453 E.02092 G1 X18.165 Y-5.547 E.0207 G1 X18.835 Y-5.466 E.0213 G1 X19.449 Y-5.212 E.02102 G1 X19.977 Y-4.811 E.02096 G1 X20.387 Y-4.29 E.02093 G1 X20.49 Y-4.092 E.00706 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.501 Y-1.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.464094 G1 F15000 G1 X20.654 Y-2.037 E.00643 G1 X20.877 Y-2.061 E.00769 G1 X21.124 Y-1.978 E.00893 G2 X21.125 Y-4.022 I-38.078 J-1.034 E.07016 G1 X20.841 Y-3.931 E.01025 G3 X20.508 Y-4.056 I-.042 J-.39 E.01265 G1 X20.694 Y-3.639 E.01567 G1 X20.754 Y-3.029 E.02103 G1 X20.695 Y-2.371 E.02269 G1 X20.517 Y-1.966 E.01519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.337 Y-4.871 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X21.337 Y-4.46 E.01365 G1 X20.788 Y-4.396 E.01831 G2 X20.415 Y-4.931 I-2.747 J1.517 E.02168 G2 X19.572 Y-6.487 I-1.853 J-.002 E.06121 G1 X17.591 Y-6.487 E.06571 G3 X17.801 Y-5.917 I-.706 J.583 E.02053 G2 X16.33 Y-5.269 I.44 J2.991 E.05397 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X17.061 Y-5.715 G1 X17.801 Y-5.917 G1 X17.713 Y-6.283 ;WIPE_END G1 X18.752 Y-10.052 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z11.2 F30000 G1 X30.752 Y-52.052 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:11 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;11 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.4 I-1.134 J.442 P1 F30000 G1 X50 Y-1.736 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.26 Y-1.717 I.005 J1.739 E.00865 G1 X50.34 Y-1.709 E.00267 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.736 I-.662 J-1.608 E.20226 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.3 Y-2.122 I.005 J2.146 E.00998 G1 X50.42 Y-2.111 E.004 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.818 J-1.984 E.25003 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.342 Y-2.555 E.01057 G1 X50.505 Y-2.539 E.00502 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.342 Y-2.555 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.194 Y.539 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F15000 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y-1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.954 Y-.954 G1 X51.184 Y-.633 G1 X51.323 Y-.263 G1 X51.323 Y.263 G1 X51.207 Y.571 ;WIPE_END G1 X44.416 Y-2.913 Z11.4 F30000 G1 X-51.352 Y-52.052 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z11.4 F30000 G1 X-39.352 Y-10.052 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-38.061 Y-1.982 Z11.4 F30000 G1 X-37.767 Y-1.113 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.977 Y-1.014 E.00771 G3 X-39.358 Y-5.081 I-.823 J-1.988 E.23359 G1 X-39.081 Y-5.136 E.00935 G3 X-37.725 Y-1.138 I.281 J2.134 E.19625 G1 X-37.733 Y-1.134 E.0003 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.947 Y-1.478 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.133 Y-1.39 E.00683 G3 X-39.252 Y-4.687 I-.667 J-1.612 E.18936 G1 X-39.028 Y-4.731 E.00758 G3 X-37.913 Y-1.5 I.228 J1.73 E.15851 M73 P74 R21 G1 X-38.146 Y-1.867 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.139 Y-4.266 I-.654 J-1.134 E.13688 G1 X-38.971 Y-4.299 E.00527 G3 X-38.112 Y-1.888 I.171 J1.298 E.10935 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.461 Y-1.734 G1 X-38.629 Y-1.701 G1 X-38.971 Y-1.701 G1 X-39.139 Y-1.734 G1 X-39.455 Y-1.865 G1 X-39.598 Y-1.96 G1 X-39.84 Y-2.202 G1 X-39.883 Y-2.267 ;WIPE_END G1 X-40.156 Y5.36 Z11.4 F30000 G1 X-40.547 Y16.255 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.663 Y16.076 E.0071 G3 X-39.358 Y12.919 I1.863 J-1.078 E.13089 G1 X-39.081 Y12.864 E.00935 G3 X-40.506 Y16.309 I.281 J2.134 E.29895 G1 X-40.523 Y16.287 E.00091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.208 Y16.029 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.31 Y15.872 E.00622 G3 X-39.252 Y13.313 I1.51 J-.874 E.1061 G1 X-39.028 Y13.269 E.00758 G3 X-40.183 Y16.061 I.228 J1.73 E.24234 G1 X-40.184 Y16.061 E.00002 G1 X-39.846 Y15.788 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-39.933 Y15.654 E.00488 G3 X-39.139 Y13.734 I1.133 J-.656 E.07375 G1 X-38.971 Y13.701 E.00527 G3 X-39.821 Y15.818 I.171 J1.298 E.1676 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.933 Y15.654 G1 X-40.011 Y15.501 G1 X-40.099 Y15.171 G1 X-40.099 Y14.829 G1 X-40.011 Y14.499 G1 X-39.935 Y14.345 G1 X-39.84 Y14.202 G1 X-39.655 Y14.018 ;WIPE_END G1 X-38.017 Y6.563 Z11.4 F30000 G1 X-35.102 Y-6.698 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.494 Y-3.993 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-35.494 Y-6.306 E.07106 G1 X-37.807 Y-6.306 E.07106 G1 X-35.522 Y-4.021 E.09927 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.927 Y-5.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.531757 G1 F15000 G1 X-35.927 Y-5.873 E.03324 G1 X-36.762 Y-5.873 E.03324 G1 X-35.955 Y-5.067 E.04542 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.662 Y-6.67 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.435086 G1 F15000 G1 X-35.298 Y-3.306 E.15201 G1 X-35.298 Y-3.21 E.00307 G1 X-35.316 Y-3.193 E.00079 G1 X-35.316 Y-2.769 E.01354 G1 X-36.828 Y-4.271 E.06812 G3 X-36.485 Y-3.384 I-1.747 J1.187 E.03068 G1 X-35.369 Y-2.268 E.05042 G1 X-35.862 Y-2.335 E.01591 G1 X-35.956 Y-2.301 E.0032 G1 X-36.462 Y-2.806 E.02285 G3 X-36.548 Y-2.338 I-2.613 J-.236 E.01525 G1 X-36.107 Y-1.897 E.01993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.512 Y-1.668 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.630509 G1 F13024.531 G1 X-36.903 Y-1.156 E.03083 G1 X-37.191 Y-.908 E.0182 G1 X-37.793 Y-.561 E.03328 G1 X-38.152 Y-.435 E.0182 G1 X-38.762 Y-.355 E.02948 G1 X-39.141 Y-.383 E.0182 G1 X-39.813 Y-.563 E.03328 G1 X-40.155 Y-.728 E.0182 G1 X-40.644 Y-1.103 E.02948 G1 X-41.066 Y-1.635 E.03251 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13024.531 G1 X-40.644 Y-1.103 G1 X-40.155 Y-.728 G1 X-39.813 Y-.563 G1 X-39.499 Y-.479 ;WIPE_END G1 X-36.904 Y-4.506 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-37.535 Y-5.096 E.02393 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.951 Y-5.383 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.424586 G1 F15000 G1 X-38.873 Y-6.306 E.04059 G1 X-41.756 Y-6.306 E.08965 G1 X-41.756 Y-4.398 E.05932 G3 X-41.747 Y-3.052 I-13.616 J.763 E.04191 ;WIDTH:0.457819 G1 X-41.727 Y-2.333 E.02431 ;WIDTH:0.493383 G1 X-41.711 Y-2.138 E.00717 ;WIDTH:0.522214 G3 X-41.732 Y-1.575 I-1.591 J.224 E.02212 G1 X-41.448 Y-1.736 E.01277 ;WIDTH:0.558412 G1 F14846.139 G1 X-41.287 Y-1.717 E.00682 ;WIDTH:0.60162 G1 F13698 G1 X-41.125 Y-1.698 E.00739 G1 X-41.09 Y-1.667 E.00217 ;WIDTH:0.603458 G1 F13653.076 G1 X-41.155 Y-1.879 E.01014 ;WIDTH:0.559385 G1 F14818.176 G1 X-41.221 Y-2.091 E.00935 ;WIDTH:0.515312 G1 F15000 G1 X-41.286 Y-2.303 E.00855 ;WIDTH:0.479367 G1 X-41.32 Y-2.639 E.01199 ;WIDTH:0.455715 G1 X-41.354 Y-2.974 E.01134 G1 X-41.294 Y-3.639 E.02245 ;WIDTH:0.463497 G1 X-41.155 Y-3.945 E.01152 ;WIDTH:0.422532 G1 X-41.017 Y-4.251 E.0104 G1 X-40.617 Y-4.782 E.02055 G1 X-40.094 Y-5.192 E.02056 G1 X-39.483 Y-5.452 E.02055 G3 X-38.775 Y-5.545 I1.428 J8.113 E.02207 G1 X-38.165 Y-5.465 E.01904 G1 X-37.988 Y-5.397 E.00586 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.036 Y-5.913 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.466767 G1 F15000 G1 X-39.256 Y-5.899 E.00762 ;WIDTH:0.482647 G1 X-39.476 Y-5.884 E.00791 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.516 Y-5.882 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.490806 G1 F15000 G1 X-39.892 Y-5.905 E.01374 ;WIDTH:0.421926 G1 X-40.268 Y-5.929 E.01163 G1 X-41.379 Y-5.929 E.03431 G1 X-41.379 Y-4.362 E.04838 G1 X-40.916 Y-5.012 E.02463 G1 X-40.323 Y-5.491 E.02354 ;WIDTH:0.435491 G1 X-39.981 Y-5.66 E.01221 ;WIDTH:0.466473 G1 X-39.639 Y-5.829 E.01318 ;WIDTH:0.481964 G1 X-39.553 Y-5.866 E.00333 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.939 Y-5.565 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.489818 G1 F15000 G2 X-40.931 Y-5.482 I-.026 J.044 E.0083 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.854 Y-1.352 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-41.854 Y13.328 E.40673 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.096 Y13.675 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.617428 G1 F13321.079 G1 X-40.69 Y13.162 E.03063 G1 X-40.156 Y12.727 E.03223 G1 X-39.521 Y12.455 E.03234 G1 X-38.837 Y12.361 E.03233 G1 X-38.152 Y12.434 E.03226 G1 X-37.51 Y12.69 E.03235 G1 X-36.962 Y13.11 E.03232 G1 X-36.527 Y13.644 E.03223 G1 X-36.281 Y14.202 E.02858 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P74 R20 ;WIPE_START G1 F13321.079 G1 X-36.527 Y13.644 G1 X-36.962 Y13.11 G1 X-37.51 Y12.69 G1 X-37.52 Y12.687 ;WIPE_END G1 X-40.939 Y17.468 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.48982 G1 F15000 G2 X-40.931 Y17.551 I-.026 J.044 E.0083 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.49 Y17.884 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.48782 G1 F15000 G1 X-39.843 Y17.724 E.01403 ;WIDTH:0.421833 G1 X-40.196 Y17.565 E.01195 G3 X-40.916 Y17.012 I2.341 J-3.796 E.0281 G1 X-41.291 Y16.523 E.01901 G1 X-41.379 Y16.362 E.00567 G1 X-41.379 Y17.929 E.04837 G1 X-40.268 Y17.929 E.0343 ;WIDTH:0.433358 G1 X-39.96 Y17.915 E.0098 ;WIDTH:0.460074 G1 X-39.652 Y17.902 E.01047 ;WIDTH:0.473432 G1 X-39.53 Y17.888 E.00432 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.084 Y17.882 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.493239 G1 F15000 G1 X-38.405 Y17.903 E.0118 ;WIDTH:0.442722 G1 X-38.726 Y17.924 E.01048 G1 X-39.45 Y17.886 E.02364 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.218 Y16.974 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.358882 G1 F15000 G1 X-36.577 Y17.391 E.01418 G1 X-36.826 Y17.582 E.00808 G1 X-36.218 Y17.582 E.01566 G1 X-36.218 Y17.014 E.01463 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.918 Y15.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.490805 G1 F15000 G1 X-36.077 Y16.056 E.01368 ;WIDTH:0.424656 G1 X-36.235 Y16.396 E.01166 G1 X-36.684 Y17.012 E.02371 G1 X-37.277 Y17.491 E.02371 ;WIDTH:0.435492 G1 X-37.619 Y17.66 E.01222 ;WIDTH:0.466476 G1 X-37.961 Y17.829 E.01318 ;WIDTH:0.49819 G1 X-38.084 Y17.882 E.00494 ;WIDTH:0.490809 G1 X-37.708 Y17.905 E.01374 ;WIDTH:0.422695 G1 X-37.332 Y17.929 E.01165 G1 X-35.871 Y17.929 E.04521 G1 X-35.871 Y16.468 E.04521 ;WIDTH:0.43549 G1 X-35.887 Y16.16 E.00986 ;WIDTH:0.466471 G1 X-35.902 Y15.852 E.01064 ;WIDTH:0.481961 G1 X-35.914 Y15.756 E.00347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.89 Y14.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.443452 G1 F15000 G1 X-35.876 Y15.074 E.01171 ;WIDTH:0.449891 G1 X-35.896 Y15.375 E.01 ;WIDTH:0.470066 G1 X-35.916 Y15.676 E.0105 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.397 Y14.069 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.404595 G1 F15000 G1 X-35.474 Y14.184 E.00408 G1 X-35.878 Y14.32 E.01258 ;WIDTH:0.444274 G1 X-35.966 Y14.306 E.00292 ;WIDTH:0.492823 G1 X-36.055 Y14.292 E.00328 ;WIDTH:0.541372 G1 X-36.143 Y14.278 E.00363 ;WIDTH:0.589922 G1 F13990.936 G1 X-36.231 Y14.264 E.00398 ;WIDTH:0.625259 G1 F13141.935 G1 X-36.263 Y14.239 E.00195 ;WIDTH:0.61469 G1 F13384.867 G1 X-36.267 Y14.344 E.00493 ;WIDTH:0.571425 G1 F14480.58 G1 X-36.271 Y14.45 E.00456 ;WIDTH:0.528161 G1 F15000 G1 X-36.275 Y14.556 E.00419 ;WIDTH:0.484896 G1 X-36.278 Y14.662 E.00381 ;WIDTH:0.4246 G2 X-36.255 Y15.025 I1.287 J.098 E.01135 G1 X-36.335 Y15.635 E.01915 G1 X-36.583 Y16.251 E.02067 G1 X-36.983 Y16.782 E.02067 G1 X-37.506 Y17.192 E.02067 G1 X-38.117 Y17.452 E.02067 G1 X-38.775 Y17.545 E.02067 G1 X-39.435 Y17.465 E.02067 G1 X-40.051 Y17.217 E.02067 G3 X-40.617 Y16.782 I4.086 J-5.911 E.02219 G1 X-40.992 Y16.294 E.01915 G1 X-41.273 Y15.691 E.02069 G1 X-41.354 Y15.026 E.02085 ;WIDTH:0.457819 G1 X-41.294 Y14.361 E.02256 ;WIDTH:0.50142 G1 X-41.232 Y14.144 E.00842 ;WIDTH:0.548269 G1 X-41.17 Y13.928 E.00929 ;WIDTH:0.595118 G1 F13859.282 G1 X-41.108 Y13.711 E.01015 ;WIDTH:0.622738 G1 F13199.075 G1 X-41.096 Y13.675 E.00178 ;WIDTH:0.609494 G1 F13507.623 G1 X-41.208 Y13.71 E.00545 ;WIDTH:0.574613 G1 F14393.773 G1 X-41.321 Y13.745 E.00511 ;WIDTH:0.548409 G1 F15000 G1 X-41.491 Y13.736 E.00702 ;WIDTH:0.51475 G1 X-41.642 Y13.618 E.00735 ;WIDTH:0.467273 G1 X-41.793 Y13.501 E.00661 G1 X-41.735 Y13.623 E.00467 ;WIDTH:0.520348 G1 X-41.696 Y13.984 E.01414 ;WIDTH:0.522646 G1 X-41.713 Y14.306 E.01258 ;WIDTH:0.488644 G1 X-41.73 Y14.627 E.01169 ;WIDTH:0.456836 G2 X-41.727 Y15.667 I6.416 J.5 E.03512 ;WIDTH:0.463496 G1 X-41.741 Y16.033 E.01254 ;WIDTH:0.420427 G1 X-41.756 Y16.398 E.01126 G1 X-41.756 Y18.306 E.05868 G1 X-35.494 Y18.306 E.19262 G1 X-35.494 Y14.439 E.11895 ;WIDTH:0.419999 G1 X-35.407 Y14.107 E.01054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.397 Y14.069 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-35.396 Y-1.988 E.44487 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.69 Y-.675 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-35.69 Y.953 E.05401 G2 X-36.259 Y1.826 I.405 J.886 E.03644 G2 X-35.69 Y3.019 I1.916 J-.181 E.04477 G1 X-35.69 Y6.195 E.10534 G2 X-36.259 Y7.067 I.405 J.886 E.03644 G2 X-35.69 Y8.261 I1.916 J-.181 E.04477 G1 X-35.69 Y11.436 E.10534 G2 X-36.259 Y12.308 I.405 J.886 E.03644 G2 X-35.69 Y13.502 I1.916 J-.181 E.04477 G1 X-35.69 Y11.874 E.05401 G1 X-39.421 Y11.929 F30000 G1 F16200 G3 X-37.816 Y12.02 I.635 J2.999 E.05396 G2 X-37.056 Y11.326 I-.623 J-1.445 E.03478 G2 X-37.686 Y9.688 I-2.177 J-.103 E.05991 G1 X-38.62 Y9.032 E.03785 G1 X-38.857 Y8.705 E.01341 G3 X-38.227 Y7.067 I2.177 J-.103 E.05991 G1 X-37.293 Y6.412 E.03785 G1 X-37.056 Y6.084 E.01341 G2 X-37.686 Y4.446 I-2.177 J-.103 E.05991 G1 X-38.62 Y3.791 E.03785 G1 X-38.857 Y3.464 E.01341 G3 X-38.227 Y1.826 I2.177 J-.103 E.05991 G1 X-37.293 Y1.171 E.03785 G1 X-37.056 Y.843 E.01341 G2 X-37.216 Y-.14 I-1.468 J-.265 E.03367 G1 X-37.291 Y-.245 E.00428 G3 X-39.896 Y-.058 I-1.509 J-2.779 E.08929 G1 X-40.307 Y.515 E.02339 G1 X-41.241 Y1.171 E.03785 G1 X-41.478 Y1.498 E.01341 G2 X-40.848 Y3.136 I2.177 J.103 E.05991 G1 X-39.914 Y3.791 E.03785 G1 X-39.677 Y4.119 E.01341 G3 X-40.307 Y5.757 I-2.177 J.103 E.05991 G1 X-41.241 Y6.412 E.03785 G1 X-41.478 Y6.739 E.01341 G2 X-40.848 Y8.377 I2.177 J.103 E.05991 G1 X-39.914 Y9.032 E.03785 G1 X-39.677 Y9.36 E.01341 G3 X-40.307 Y10.998 I-2.177 J.103 E.05991 G1 X-41.241 Y11.653 E.03785 G1 X-41.478 Y11.981 E.01341 G2 X-41.318 Y12.963 I1.468 J.265 E.03367 G1 X-41.259 Y13.045 E.00335 G3 X-39.991 Y12.09 I2.576 J2.099 E.05319 G1 X-39.968 Y12.082 E.0008 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-39.991 Y12.09 G1 X-40.703 Y12.497 G1 X-41.259 Y13.045 G1 X-41.318 Y12.963 G1 X-41.391 Y12.7 ;WIPE_END G1 X-37.289 Y19.136 Z11.4 F30000 G1 X-15.232 Y53.745 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G3 X-16.776 Y51.071 I-1.796 J-.746 E.28691 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z11.4 F30000 G1 X-5.6 Y52.94 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42873 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290595 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.2 E.01236 G1 X-18.428 Y53.665 E.01494 G1 X-18.262 Y53.944 E.00996 G1 X-17.975 Y54.231 E.01249 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-18.191 Y53.144 I.146 J1.171 E.05675 G1 X-18.021 Y53.611 E.01526 G1 X-17.743 Y53.929 E.013 G2 X-16.101 Y53.713 I.713 J-.929 E.05653 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.322 E.00981 G1 X-17.657 Y52.519 E.00939 G1 X-17.791 Y52.809 E.00983 G1 X-17.814 Y53.089 E.00861 G1 X-17.662 Y53.476 E.0128 G1 X-17.42 Y53.68 E.00974 G1 X-17.133 Y53.784 E.00936 G1 X-16.826 Y53.757 E.00948 G1 X-16.549 Y53.627 E.00941 G1 X-16.313 Y53.327 E.01173 G1 X-16.196 Y53.016 E.01021 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.32 Y52.714 E.00651 G1 X-17.426 Y52.907 E.00678 G1 X-17.409 Y53.127 E.00677 G1 X-17.314 Y53.292 E.00585 G1 X-17.134 Y53.394 E.00636 G1 X-16.924 Y53.393 E.00646 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y52.899 F30000 ;TYPE:Gap infill ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y52.95 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y52.899 F30000 G1 F12000 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-3.727 Y52.621 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01244 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01244 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z11.4 F30000 G1 X-2.945 Y22.045 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.854 Y17.187 Z11.4 F30000 G1 X18.569 Y-.882 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.481 Y-.869 E.00296 G3 X17.642 Y-5.081 I-.281 J-2.134 E.21492 G1 X17.919 Y-5.136 E.00935 G3 X18.756 Y-.924 I.281 J2.134 E.21492 G1 X18.608 Y-.89 E.00505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.489 Y-1.281 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.427 Y-1.272 E.00207 G3 X17.748 Y-4.687 I-.228 J-1.73 E.17423 G1 X17.972 Y-4.731 E.00758 G3 X18.651 Y-1.317 I.228 J1.73 E.17422 G1 X18.528 Y-1.289 E.00417 G1 X18.404 Y-1.707 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.371 Y-1.704 E.00105 G3 X17.861 Y-4.266 I-.171 J-1.298 E.1211 G1 X18.029 Y-4.299 E.00527 G3 X18.538 Y-1.737 I.171 J1.298 E.1211 G1 X18.444 Y-1.716 E.00299 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.371 Y-1.704 G1 X18.029 Y-1.701 G1 X17.861 Y-1.734 G1 X17.545 Y-1.865 G1 X17.402 Y-1.96 G1 X17.16 Y-2.202 G1 X16.989 Y-2.499 G1 X16.934 Y-2.661 G1 X16.926 Y-2.704 ;WIPE_END G1 X17.148 Y4.925 Z11.4 F30000 G1 X17.501 Y17.033 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.377 Y16.986 E.0044 G3 X17.642 Y12.919 I.822 J-1.989 E.17758 G1 X17.919 Y12.864 E.00935 G3 X17.644 Y17.077 I.281 J2.134 E.25227 G1 X17.54 Y17.045 E.00361 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.632 Y16.648 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.533 Y16.61 E.00351 G3 X17.748 Y13.313 I.667 J-1.612 E.14395 G1 X17.972 Y13.269 E.00758 G3 X17.749 Y16.683 I.228 J1.73 E.2045 G1 X17.67 Y16.659 E.00273 G1 X17.761 Y16.227 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.7 Y16.208 E.00198 G3 X17.861 Y13.734 I.5 J-1.21 E.10006 G1 X18.029 Y13.701 E.00527 G3 X18.029 Y16.297 I.171 J1.298 E.13688 G1 X17.8 Y16.237 E.00728 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.7 Y16.208 G1 X17.545 Y16.135 G1 X17.402 Y16.04 G1 X17.16 Y15.798 G1 X16.989 Y15.501 G1 X16.934 Y15.339 G1 X16.901 Y15.171 G1 X16.901 Y14.829 G1 X16.948 Y14.652 ;WIPE_END G1 X16.079 Y7.069 Z11.4 F30000 G1 X14.502 Y-6.698 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X15.139 Y-1.873 Z11.4 F30000 G1 Z11 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X15.09 Y-1.868 E.00161 G1 X15.09 Y-.289 E.0524 G1 X15.197 Y-.14 E.00607 G1 X15.379 Y.515 E.02256 G3 X15.09 Y1.191 I-.951 J-.007 E.02504 G1 X15.09 Y4.953 E.12477 G1 X15.197 Y5.101 E.00607 G1 X15.379 Y5.757 E.02256 G3 X15.09 Y6.433 I-.951 J-.007 E.02504 G1 X15.09 Y10.194 E.12477 G1 X15.197 Y10.343 E.00607 G1 X15.379 Y10.998 E.02256 G3 X15.09 Y11.674 I-.951 J-.007 E.02504 G1 X15.09 Y13.868 E.07279 G1 X15.264 Y13.885 E.00579 G3 X16.224 Y12.559 I2.99 J1.152 E.05493 G3 X16.413 Y11.653 I.746 J-.317 E.03267 G1 X17.348 Y10.998 E.03785 G2 X18 Y9.688 I-1.465 J-1.547 E.04957 G2 X17.741 Y9.032 I-.655 J-.12 E.02463 G1 X16.807 Y8.377 E.03785 G3 X16.154 Y7.067 I1.465 J-1.547 E.04957 G3 X16.413 Y6.412 I.655 J-.12 E.02463 G1 X17.348 Y5.757 E.03785 G2 X18 Y4.446 I-1.465 J-1.547 E.04957 G2 X17.741 Y3.791 I-.655 J-.12 E.02463 G1 X16.807 Y3.136 E.03785 G3 X16.154 Y1.826 I1.465 J-1.547 E.04957 G3 X16.413 Y1.171 I.655 J-.12 E.02463 G1 X17.348 Y.515 E.03785 G1 X17.652 Y.091 E.01733 G2 X20.125 Y-.514 I.543 J-3.137 E.08687 G3 X20.621 Y.515 I-.938 J1.086 E.03897 G3 X20.361 Y1.171 I-.655 J.12 E.02463 G1 X19.427 Y1.826 E.03785 G2 X18.775 Y3.136 I1.465 J1.547 E.04957 G2 X19.034 Y3.791 I.655 J.12 E.02463 G1 X19.968 Y4.446 E.03785 G3 X20.621 Y5.757 I-1.465 J1.547 E.04957 G3 X20.361 Y6.412 I-.655 J.12 E.02463 G1 X19.427 Y7.067 E.03785 G2 X18.775 Y8.377 I1.465 J1.547 E.04957 G2 X19.034 Y9.032 I.655 J.12 E.02463 G1 X19.968 Y9.688 E.03785 G3 X20.621 Y10.998 I-1.465 J1.547 E.04957 G3 X20.361 Y11.653 I-.655 J.12 E.02463 G1 X19.597 Y12.189 E.03098 G3 X20.804 Y13.249 I-1.541 J2.975 E.05381 G1 X20.806 Y13.247 E.00008 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.804 Y13.249 G1 X20.131 Y12.519 G1 X19.597 Y12.189 G1 X19.905 Y11.973 ;WIPE_END G1 X14.574 Y14.977 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.432571 G1 F15000 G1 X18.081 Y18.484 E.15748 G1 X17.53 Y18.484 E.0175 G1 X14.716 Y15.67 E.12636 G1 X14.716 Y16.221 E.0175 G1 X16.979 Y18.484 E.10162 G1 X16.428 Y18.484 E.0175 G1 X14.716 Y16.772 E.07688 G1 X14.716 Y17.323 E.0175 G1 X15.877 Y18.484 E.05213 G1 X15.458 Y18.484 E.01328 G1 X15.441 Y18.502 E.00079 G1 X15.343 Y18.502 E.00311 G1 X14.529 Y17.688 E.03655 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.846 Y18.338 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X14.783 Y18.375 E.00204 G1 X14.848 Y18.41 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.254 Y-1.352 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X21.254 Y13.328 E.40673 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.48 Y-1.671 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.621846 G1 F13219.411 G1 X20.606 Y-1.706 E.00615 ;WIDTH:0.574726 G1 F14390.702 G1 X20.731 Y-1.741 E.00565 ;WIDTH:0.542192 G1 F15000 G1 X20.888 Y-1.732 E.00638 ;WIDTH:0.516457 G1 X21.134 Y-1.573 E.01129 G1 X21.099 Y-1.977 E.01564 ;WIDTH:0.513171 G1 X21.119 Y-2.282 E.0117 ;WIDTH:0.451279 G2 X21.143 Y-3.031 I-6.453 J-.578 E.02495 G1 X21.016 Y-3.048 E.00425 G1 X20.74 Y-3.308 E.01263 G1 X20.74 Y-2.692 E.02049 ;WIDTH:0.467838 G1 X20.678 Y-2.366 E.01148 ;WIDTH:0.511424 G1 X20.617 Y-2.04 E.01266 ;WIDTH:0.551916 G1 X20.576 Y-1.93 E.00489 ;WIDTH:0.589312 G1 F14006.553 G1 X20.535 Y-1.819 E.00525 ;WIDTH:0.60801 G1 F13543.091 G1 X20.494 Y-1.709 E.00543 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.888 Y-5.873 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.531758 G1 F15000 G1 X20.723 Y-5.038 E.04701 G1 X20.723 Y-5.873 E.03324 G1 X19.928 Y-5.873 E.03165 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.843 Y-6.306 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X21.156 Y-3.993 E.1005 G1 X21.156 Y-6.306 E.07106 G1 X18.883 Y-6.306 E.06983 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.622 Y-5.006 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.367234 G1 F15000 G1 X16.116 Y-5.519 E.01882 G1 X16.194 Y-5.578 E.00257 G1 X15.622 Y-5.578 E.01511 G1 X15.622 Y-5.046 E.01405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.294 Y-3.46 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.465042 G1 F15000 G1 X15.284 Y-2.75 E.02443 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.294 Y-3.46 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.423279 G1 F15000 G1 X15.475 Y-4.049 E.01909 G1 X15.839 Y-4.718 E.02363 G1 X16.364 Y-5.271 E.02363 G1 X17.015 Y-5.669 E.02363 G3 X17.682 Y-5.867 I3.56 J10.734 E.02158 G1 X17.604 Y-5.929 E.00308 G1 X15.271 Y-5.929 E.07229 G1 X15.271 Y-4.076 E.05744 G1 X15.292 Y-3.5 E.01785 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.686 Y-2.198 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.631935 G1 F12992.987 G1 X15.914 Y-1.683 E.02705 G1 X16.125 Y-1.36 E.01851 G1 X16.56 Y-.925 E.02955 G1 X16.878 Y-.716 E.01825 G1 X17.52 Y-.45 E.03336 G1 X17.892 Y-.373 E.01825 G1 X18.508 Y-.373 E.02955 G1 X18.88 Y-.45 E.01825 G1 X19.52 Y-.715 E.03325 G1 X19.841 Y-.923 E.01837 G1 X20.27 Y-1.366 E.02955 G1 X20.458 Y-1.638 E.01589 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12992.987 G1 X20.27 Y-1.366 G1 X19.841 Y-.923 G1 X19.52 Y-.715 G1 X18.901 Y-.459 ;WIPE_END G1 X14.796 Y-2.053 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.404902 G1 F15000 G1 X14.873 Y-2.187 E.00456 G1 X15.282 Y-2.32 E.01268 ;WIDTH:0.43749 G1 X15.387 Y-2.304 E.0034 ;WIDTH:0.472471 G1 X15.491 Y-2.289 E.00371 ;WIDTH:0.514682 G1 X15.556 Y-2.258 E.00275 ;WIDTH:0.564124 G1 F14683.442 G1 X15.621 Y-2.228 E.00304 ;WIDTH:0.613566 G1 F13411.242 G1 X15.686 Y-2.198 E.00333 ;WIDTH:0.616458 G1 F13343.616 G1 X15.684 Y-2.3 E.00479 ;WIDTH:0.5728 G1 F14443.012 G1 X15.681 Y-2.403 E.00442 ;WIDTH:0.529143 G1 F15000 G1 X15.678 Y-2.505 E.00406 ;WIDTH:0.485485 G1 X15.676 Y-2.608 E.00369 ;WIDTH:0.420177 G3 X15.673 Y-3.308 I14.071 J-.401 E.02153 G1 X15.839 Y-3.951 E.02043 G1 X16.166 Y-4.53 E.02043 G1 X16.631 Y-5.004 E.02043 G1 X17.203 Y-5.342 E.02043 G3 X17.892 Y-5.527 I2.313 J7.254 E.02193 G3 X18.556 Y-5.523 I.308 J4.137 E.02044 G2 X17.777 Y-6.306 I-110.557 J109.304 E.03397 G1 X14.894 Y-6.306 E.08861 G1 X14.894 Y-2.439 E.11887 ;WIDTH:0.419999 G1 X14.806 Y-2.092 E.01102 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.797 Y14.069 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X14.796 Y-2.013 E.44554 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.797 Y14.069 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.416892 G1 F15000 G1 X14.894 Y14.602 E.01652 G1 X14.894 Y14.809 E.00631 G1 X15.741 Y15.655 E.03648 G1 X15.655 Y15.025 E.0194 G1 X15.705 Y14.583 E.01354 ;WIDTH:0.444318 G1 X15.698 Y14.512 E.00234 ;WIDTH:0.487168 G1 X15.69 Y14.441 E.00259 ;WIDTH:0.530018 G1 X15.683 Y14.37 E.00284 ;WIDTH:0.572869 G1 F14441.145 G1 X15.675 Y14.298 E.00309 ;WIDTH:0.615719 G1 F13360.82 G1 X15.668 Y14.227 E.00334 ;WIDTH:0.617175 G1 F13326.95 G1 X15.612 Y14.248 E.00278 ;WIDTH:0.577236 G1 F14323.112 G1 X15.557 Y14.269 E.00258 ;WIDTH:0.537297 G1 F15000 G1 X15.501 Y14.289 E.00239 ;WIDTH:0.492995 G1 X15.373 Y14.298 E.0047 ;WIDTH:0.444331 G1 X15.245 Y14.306 E.00419 ;WIDTH:0.415783 G1 X14.865 Y14.179 E.01219 G1 X14.818 Y14.103 E.00272 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.334 Y14.646 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.424974 G1 F15000 G1 X15.262 Y14.688 E.00258 G1 X15.338 Y14.722 E.00259 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.668 Y14.227 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.618119 G1 F13305.073 G1 X15.89 Y13.71 E.02638 G1 X16.31 Y13.162 E.03237 G1 X16.844 Y12.727 E.03227 G1 X17.479 Y12.455 E.03239 G1 X18.163 Y12.361 E.03236 G1 X18.848 Y12.434 E.0323 G1 X19.49 Y12.69 E.03238 G1 X20.038 Y13.11 E.03236 G1 X20.473 Y13.643 E.03224 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13305.073 G1 X20.038 Y13.11 G1 X19.49 Y12.69 G1 X18.913 Y12.46 ;WIPE_END G1 X17.548 Y17.463 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.425086 G1 F15000 G1 X18.391 Y18.306 E.03713 G1 X21.156 Y18.306 E.0861 G1 X21.156 Y16.398 E.0594 G3 X21.147 Y15.052 I12.217 J-.753 E.04197 ;WIDTH:0.457821 G1 X21.127 Y14.333 E.02431 ;WIDTH:0.49336 G1 X21.111 Y14.137 E.00722 ;WIDTH:0.520486 G3 X21.138 Y13.614 I1.258 J-.197 E.02052 ;WIDTH:0.482919 G1 X21.166 Y13.557 E.00225 ;WIDTH:0.454297 G1 X21.193 Y13.501 E.0021 ;WIDTH:0.464852 G1 X21.02 Y13.619 E.0072 ;WIDTH:0.514583 G1 X20.847 Y13.737 E.00805 ;WIDTH:0.559248 G1 F14822.1 G1 X20.686 Y13.718 E.00684 ;WIDTH:0.603283 G1 F13657.334 G1 X20.524 Y13.7 E.00742 G1 X20.496 Y13.676 E.00169 ;WIDTH:0.604638 G1 F13624.391 G1 X20.559 Y13.885 E.01001 ;WIDTH:0.560093 G1 F14797.875 G1 X20.623 Y14.094 E.00921 ;WIDTH:0.515549 G1 F15000 G1 X20.686 Y14.303 E.00842 ;WIDTH:0.479369 G1 X20.72 Y14.639 E.01199 ;WIDTH:0.455718 G1 X20.754 Y14.974 E.01134 G1 X20.694 Y15.639 E.02245 ;WIDTH:0.463499 G1 X20.555 Y15.945 E.01152 ;WIDTH:0.422681 G1 X20.417 Y16.251 E.0104 G1 X20.017 Y16.782 E.02056 G1 X19.494 Y17.192 E.02056 G1 X18.883 Y17.452 E.02056 G1 X18.225 Y17.545 E.02056 G1 X17.588 Y17.468 E.01985 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.916 Y17.882 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.514418 G1 F15000 G1 X18.597 Y17.903 E.0123 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.916 Y17.882 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.490814 G1 F15000 G1 X19.292 Y17.905 E.01374 ;WIDTH:0.421926 G1 X19.668 Y17.929 E.01163 G1 X20.779 Y17.929 E.03431 G1 X20.779 Y16.362 E.04838 G1 X20.316 Y17.012 E.02463 G1 X19.723 Y17.491 E.02354 ;WIDTH:0.435492 G1 X19.381 Y17.66 E.01222 ;WIDTH:0.466478 G1 X19.039 Y17.829 E.01318 ;WIDTH:0.481971 G1 X18.953 Y17.866 E.00333 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.395 Y17.468 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.489822 G1 F15000 G2 X20.403 Y17.551 I-.026 J.044 E.0083 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.305 Y-3.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.495415 G1 F15000 G1 X17.967 Y-6.649 E.17408 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X19.381 Y-5.234 ;WIPE_END G1 X18.752 Y-10.052 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z11.4 F30000 G1 X30.752 Y-52.052 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:11.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.6 I-1.134 J.442 P1 F30000 G1 X50 Y-1.736 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.257 Y-1.718 I.004 J1.739 E.00854 G1 X50.34 Y-1.709 E.00278 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.735 I-.662 J-1.607 E.20226 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.296 Y-2.123 I.005 J2.146 E.00986 G1 X50.42 Y-2.111 E.00411 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.818 J-1.984 E.25003 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.339 Y-2.556 E.01047 G1 X50.505 Y-2.539 E.00512 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.339 Y-2.556 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.148 Y-1.038 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F15000 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y.806 G1 X50.189 Y.951 G1 X49.811 Y.951 G1 X49.461 Y.806 G1 X49.194 Y.539 G1 X49.137 Y.402 ;WIPE_END G1 X42.371 Y-3.129 Z11.6 F30000 G1 X-51.352 Y-52.052 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z11.6 F30000 G1 X-39.352 Y-10.052 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-38.05 Y-1.986 Z11.6 F30000 G1 X-37.722 Y-1.023 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.939 Y-.92 E.00795 G3 X-39.927 Y-4.952 I-.87 J-2.077 E.22549 G3 X-38.896 Y-5.248 I1.105 J1.908 E.03594 G3 X-37.675 Y-1.052 I.088 J2.25 E.1982 G1 X-37.688 Y-1.044 E.00049 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.902 Y-1.388 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.095 Y-1.297 E.00707 G3 X-38.87 Y-4.842 I-.705 J-1.703 E.21378 G3 X-37.003 Y-2.591 I.068 J1.843 E.11202 G3 X-37.868 Y-1.41 I-1.797 J-.409 E.04994 G1 X-38.098 Y-1.784 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-39.165 Y-4.362 I-.711 J-1.216 E.14784 G3 X-38.841 Y-4.408 I.334 J1.208 E.01008 G3 X-38.063 Y-1.804 I.032 J1.408 E.11283 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.26 Y-1.697 G1 X-38.435 Y-1.638 G1 X-38.616 Y-1.602 G1 X-38.8 Y-1.59 G1 X-38.984 Y-1.602 G1 X-39.165 Y-1.638 G1 X-39.34 Y-1.697 G1 X-39.505 Y-1.779 G1 X-39.659 Y-1.881 G1 X-39.797 Y-2.003 G1 X-39.873 Y-2.089 ;WIPE_END G1 X-40.187 Y5.537 Z11.6 F30000 G1 X-40.63 Y16.31 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.758 Y16.13 E.00731 G3 X-39.927 Y13.048 I1.949 J-1.128 E.11771 G3 X-38.896 Y12.752 I1.105 J1.908 E.03594 G3 X-40.593 Y16.376 I.088 J2.25 E.30593 G1 X-40.611 Y16.345 E.00118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.292 Y16.084 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.405 Y15.927 E.00643 G3 X-39.507 Y13.294 I1.596 J-.925 E.10452 G3 X-38.87 Y13.158 I.729 J1.854 E.0217 G3 X-40.27 Y16.128 I.061 J1.844 E.25017 G1 X-40.274 Y16.12 E.0003 G1 X-39.93 Y15.842 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.028 Y15.709 E.00508 G3 X-39.165 Y13.638 I1.219 J-.708 E.07974 G3 X-38.841 Y13.592 I.334 J1.207 E.01008 G3 X-39.913 Y15.877 I.032 J1.409 E.176 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.028 Y15.709 G1 X-40.103 Y15.54 G1 X-40.162 Y15.365 G1 X-40.198 Y15.184 G1 X-40.21 Y15 G1 X-40.198 Y14.816 G1 X-40.162 Y14.635 G1 X-40.103 Y14.46 G1 X-40.021 Y14.295 G1 X-39.919 Y14.141 G1 X-39.83 Y14.04 ;WIPE_END G1 X-38.133 Y6.598 Z11.6 F30000 G1 X-35.102 Y-6.698 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-40.987 Y-5.599 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.404388 G1 F15000 G1 X-41.055 Y-5.559 E.00231 G1 X-40.984 Y-5.525 E.00231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.472 Y-5.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-41.379 Y-5.929 E.05859 G1 X-41.379 Y-4.539 E.0427 G1 X-41.15 Y-4.896 E.01303 G1 X-40.696 Y-5.35 E.01972 G1 X-40.024 Y-5.761 E.02423 G1 X-39.51 Y-5.917 E.01648 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.308 Y-5.518 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.60942 G1 F13509.375 G2 X-36.292 Y-5.422 I-.035 J.055 E.01381 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.871 Y-3.672 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-35.871 Y-5.929 E.06934 G1 X-38.129 Y-5.929 E.06936 G1 X-37.576 Y-5.761 E.01773 G1 X-37.021 Y-5.44 E.01972 G1 X-36.45 Y-4.896 E.02422 G1 X-36.039 Y-4.224 E.02422 G1 X-35.883 Y-3.71 E.01649 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.494 Y-2.921 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-35.494 Y-6.306 E.104 G1 X-37.698 Y-6.306 E.06773 ;WIDTH:0.440035 G1 X-37.86 Y-6.286 E.00526 ;WIDTH:0.480105 G1 X-38.021 Y-6.266 E.00579 ;WIDTH:0.520176 G1 X-38.182 Y-6.246 E.00632 ;WIDTH:0.573175 G1 F14432.81 G1 X-38.343 Y-6.226 E.00702 G1 X-39.121 Y-6.23 E.03361 ;WIDTH:0.552536 G1 F15000 G1 X-39.316 Y-6.249 E.00814 ;WIDTH:0.514668 G1 X-39.512 Y-6.268 E.00754 ;WIDTH:0.476801 G1 X-39.707 Y-6.287 E.00693 ;WIDTH:0.420862 G1 X-39.902 Y-6.306 E.00604 G1 X-41.756 Y-6.306 E.0571 G1 X-41.756 Y-4.056 E.0693 ;WIDTH:0.409844 G2 X-41.761 Y-2.346 I49.293 J1.005 E.05111 G1 X-41.342 Y-2.346 E.01253 G1 X-41.414 Y-2.679 E.01018 G1 X-41.414 Y-3.321 E.01919 G1 X-41.253 Y-3.99 E.02056 G1 X-40.914 Y-4.591 E.02065 G1 X-40.482 Y-5.032 E.01845 G1 X-39.835 Y-5.434 E.02278 ;WIDTH:0.442838 G1 X-39.619 Y-5.518 E.00755 ;WIDTH:0.488516 G1 X-39.403 Y-5.602 E.00841 ;WIDTH:0.534194 G1 X-39.187 Y-5.686 E.00927 ;WIDTH:0.564091 G1 F14684.372 G1 X-38.483 Y-5.702 E.02994 ;WIDTH:0.552255 G1 F15000 G1 X-38.315 Y-5.64 E.00744 ;WIDTH:0.514467 G1 X-38.147 Y-5.578 E.00688 ;WIDTH:0.47668 G1 X-37.979 Y-5.515 E.00633 ;WIDTH:0.421668 G1 X-37.811 Y-5.453 E.00553 G1 X-37.209 Y-5.114 E.02132 G1 X-36.716 Y-4.63 E.02131 G1 X-36.366 Y-4.035 E.02131 G1 X-36.181 Y-3.37 E.02132 G1 X-36.174 Y-2.94 E.01327 G1 X-35.823 Y-3.057 E.01144 G1 X-35.531 Y-2.937 E.00974 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.523 Y14.712 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X-35.335 Y14.021 E.03668 G1 X-35.335 Y12.307 E.08775 G1 X-35.954 Y14.582 E.12073 G1 X-36.375 Y14.415 E.02319 G1 X-35.335 Y10.593 E.20279 G1 X-35.335 Y8.879 E.08775 G1 X-36.656 Y13.736 E.25771 G2 X-37.001 Y13.288 I-2.408 J1.494 E.02899 G1 X-35.335 Y7.165 E.32487 G1 X-35.335 Y5.451 E.08775 G1 X-37.378 Y12.961 E.39851 G2 X-37.782 Y12.731 I-1.075 J1.418 E.02386 G1 X-35.335 Y3.737 E.47725 G1 X-35.335 Y2.023 E.08775 G1 X-38.208 Y12.584 E.56037 G2 X-38.657 Y12.519 I-.471 J1.671 E.02328 G1 X-35.335 Y.309 E.64787 G1 X-35.335 Y-1.405 E.08775 G1 X-39.127 Y12.534 E.73963 G2 X-39.627 Y12.657 I.31 J2.352 E.02638 G1 X-35.501 Y-2.506 E.80457 G3 X-35.837 Y-2.622 I-.04 J-.429 E.01873 G1 X-35.947 Y-2.582 E.00599 G1 X-40.166 Y12.924 E.8228 G2 X-40.791 Y13.507 I1.447 J2.178 E.04396 G1 X-36.632 Y-1.778 E.81105 G3 X-37.308 Y-1.008 I-2.308 J-1.346 E.05275 G1 X-41.375 Y13.938 E.79307 G1 X-41.84 Y13.936 E.02385 G1 X-37.859 Y-.695 E.77633 G3 X-38.364 Y-.553 I-.792 J-1.847 E.02694 G1 X-41.915 Y12.497 E.69246 G1 X-41.915 Y10.783 E.08775 G1 X-38.842 Y-.512 E.59937 G3 X-39.294 Y-.565 I-.028 J-1.743 E.02337 G1 X-41.915 Y9.069 E.51119 G1 X-41.915 Y7.355 E.08775 G1 X-39.726 Y-.69 E.42691 G3 X-40.135 Y-.903 I1.285 J-2.962 E.0236 G1 X-41.915 Y5.641 E.34727 G1 X-41.915 Y3.928 E.08775 G1 X-40.519 Y-1.203 E.27222 G3 X-40.871 Y-1.626 I3.728 J-3.449 E.02818 G1 X-41.915 Y2.214 E.20374 G1 X-41.915 Y.5 E.08775 G1 X-41.252 Y-1.938 E.12935 G1 X-41.718 Y-1.938 E.02388 G1 X-42.118 Y-.47 E.07789 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.173 Y14.875 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 ;HEIGHT:0.2 G1 F15000 M106 S255 G1 X-36.237 Y14.912 E.00204 G1 X-36.172 Y14.947 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y15.453 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445144 G1 F15000 G1 X-38.178 Y18.502 E.14134 G1 X-38.266 Y18.502 E.00291 G1 X-38.284 Y18.484 E.00081 G1 X-38.729 Y18.484 E.01459 G1 X-35.306 Y15.061 E.15868 G1 X-35.463 Y14.918 E.00697 G1 X-35.515 Y14.923 E.00172 G1 X-35.792 Y15.084 E.01048 G1 X-35.869 Y15.055 E.00269 G1 X-36.608 Y15.794 E.03425 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.494 Y16.316 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-37.484 Y18.306 E.08646 G1 X-35.494 Y18.306 E.06113 G1 X-35.494 Y16.356 E.05991 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.88 Y17.247 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.437121 G1 F15000 G1 X-36.553 Y17.92 E.03057 G1 X-35.88 Y17.92 E.02162 G1 X-35.88 Y17.287 E.02033 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.987 Y17.52 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.404396 G1 F15000 G1 X-41.055 Y17.559 E.00231 G1 X-40.984 Y17.594 E.00231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.472 Y17.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-40.024 Y17.761 E.01771 G1 X-40.579 Y17.44 E.01972 G1 X-41.15 Y16.897 E.02422 G1 X-41.379 Y16.539 E.01303 G1 X-41.379 Y17.929 E.0427 G1 X-39.512 Y17.929 E.05736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.385 Y17.607 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.416002 G1 F15000 G1 X-39.121 Y17.626 E.02238 G1 X-39.79 Y17.453 E.02099 G1 X-40.391 Y17.114 E.02099 G1 X-40.884 Y16.63 E.02099 G1 X-41.234 Y16.035 E.021 G1 X-41.41 Y15.367 E.02099 G1 X-41.414 Y14.679 E.02092 G1 X-41.342 Y14.346 E.01035 G1 X-41.761 Y14.344 E.01273 G2 X-41.756 Y18.306 I705.728 J1.067 E.12044 G1 X-39.084 Y18.306 E.08124 G1 X-38.413 Y17.635 E.02882 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-39.084 Y18.306 G1 X-40.136 Y18.306 ;WIPE_END G1 X-35.747 Y24.551 Z11.6 F30000 G1 X-15.232 Y53.745 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28687 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z11.6 F30000 G1 X-5.6 Y52.94 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.259 J1.925 E.26954 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.608 Y54.177 I2.172 J.901 E.41851 G1 X-5.744 Y53.901 E.01021 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42875 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-18.293 Y55.481 I-2.665 J-.779 E.15028 G3 X-14.359 Y52.21 I1.262 J-2.484 E.33866 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290578 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00942 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y52.899 F30000 ;TYPE:Gap infill ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y52.95 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y52.899 F30000 G1 F12000 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-3.671 Y51.454 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01244 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.602 E.01234 G1 X-2.226 Y52.224 E.01255 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.792 Y53.101 E.00949 G1 X-2.792 Y52.899 E.00621 G1 X-2.886 Y52.604 E.0095 G1 X-3.093 Y52.378 E.00944 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.166 Y52.948 E.00488 G1 X-3.248 Y52.752 E.00652 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.248 Y52.752 G1 X-3.166 Y52.948 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z11.6 F30000 G1 X-2.945 Y22.045 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.867 Y17.2 Z11.6 F30000 G1 X18.583 Y-.783 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.494 Y-.766 E.00302 G3 X17.073 Y-4.952 I-.303 J-2.232 E.20593 G3 X18.104 Y-5.248 I1.105 J1.907 E.03594 G3 X18.783 Y-.825 I.088 J2.25 E.21774 G1 X18.623 Y-.791 E.00543 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.504 Y-1.182 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.441 Y-1.171 E.00213 G3 X17.493 Y-4.706 I-.25 J-1.828 E.17681 G3 X18.13 Y-4.842 I.729 J1.854 E.0217 G3 X18.677 Y-1.219 I.061 J1.844 E.17792 G1 X18.543 Y-1.19 E.00455 G1 X18.419 Y-1.609 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.384 Y-1.603 E.0011 G3 X17.835 Y-4.362 I-.193 J-1.396 E.13093 G3 X18.159 Y-4.408 I.334 J1.208 E.01008 G3 X18.564 Y-1.64 I.032 J1.409 E.12542 G1 X18.458 Y-1.617 E.00334 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.384 Y-1.603 G1 X18.2 Y-1.59 G1 X17.875 Y-1.63 G1 X17.66 Y-1.697 G1 X17.495 Y-1.779 G1 X17.341 Y-1.881 G1 X17.203 Y-2.003 G1 X17.081 Y-2.141 G1 X16.979 Y-2.295 G1 X16.897 Y-2.46 G1 X16.871 Y-2.536 ;WIPE_END G1 X17.098 Y5.093 Z11.6 F30000 G1 X17.457 Y17.123 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.336 Y17.086 E.00419 G3 X17.073 Y13.048 I.855 J-2.083 E.16676 G3 X18.104 Y12.752 I1.105 J1.907 E.03594 G3 X17.616 Y17.18 I.088 J2.25 E.2569 G1 X17.494 Y17.137 E.00428 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.588 Y16.738 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.492 Y16.709 E.00331 G3 X17.493 Y13.294 I.699 J-1.707 E.14473 G3 X18.13 Y13.158 I.729 J1.854 E.0217 G3 X17.722 Y16.786 I.061 J1.844 E.20999 G1 X17.625 Y16.751 E.00339 G1 X17.727 Y16.326 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.659 Y16.305 E.00218 G3 X17.835 Y13.638 I.532 J-1.305 E.10818 G3 X18.159 Y13.592 I.334 J1.207 E.01008 G3 X17.835 Y16.363 I.032 J1.408 E.14804 G1 X17.765 Y16.339 E.00226 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.659 Y16.305 G1 X17.495 Y16.221 G1 X17.341 Y16.119 G1 X17.203 Y15.997 G1 X17.081 Y15.859 G1 X16.979 Y15.705 G1 X16.897 Y15.54 G1 X16.838 Y15.365 G1 X16.802 Y15.184 G1 X16.79 Y15 G1 X16.802 Y14.816 G1 X16.81 Y14.773 ;WIPE_END G1 X15.994 Y7.184 Z11.6 F30000 G1 X14.502 Y-6.698 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.846 Y-6.412 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X14.783 Y-6.375 E.00204 G1 X14.848 Y-6.34 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.574 Y-2.977 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.432571 G1 F15000 G1 X18.081 Y-6.484 E.15748 G1 X17.53 Y-6.484 E.0175 G1 X14.716 Y-3.67 E.12636 G1 X14.716 Y-4.221 E.0175 G1 X16.979 Y-6.484 E.10162 G1 X16.428 Y-6.484 E.0175 G1 X14.716 Y-4.772 E.07688 G1 X14.716 Y-5.323 E.0175 G1 X15.877 Y-6.484 E.05213 G1 X15.458 Y-6.484 E.01328 G1 X15.441 Y-6.502 E.00079 G1 X15.343 Y-6.502 E.00311 G1 X14.529 Y-5.688 E.03655 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.989 Y-2.938 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.371345 G1 F15000 G3 X15.267 Y-3.03 I.236 J.247 E.0081 G1 X15.583 Y-2.912 E.00903 G1 X15.643 Y-3.558 E.01736 G2 X15.017 Y-2.966 I6.485 J7.486 E.02306 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.894 Y-5.701 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.571244 G1 F14485.546 G1 X18.517 Y-5.702 E.02685 ;WIDTH:0.552339 G1 F15000 G1 X18.685 Y-5.64 E.00744 ;WIDTH:0.514527 G1 X18.853 Y-5.578 E.00689 ;WIDTH:0.476716 G1 X19.021 Y-5.516 E.00633 ;WIDTH:0.421507 G1 X19.19 Y-5.453 E.00553 G1 X19.791 Y-5.114 E.02131 G1 X20.284 Y-4.63 E.0213 G1 X20.633 Y-4.038 E.0212 ;WIDTH:0.413071 G1 X20.811 Y-3.367 E.02093 G1 X20.814 Y-2.679 E.02076 G1 X20.74 Y-2.345 E.01032 G1 X21.161 Y-2.345 E.0127 G2 X21.156 Y-6.306 I-686.485 J-1.109 E.11946 G1 X19.302 Y-6.306 E.05593 ;WIDTH:0.440035 G1 X19.14 Y-6.286 E.00526 ;WIDTH:0.480105 G1 X18.979 Y-6.266 E.00579 ;WIDTH:0.520176 G1 X18.818 Y-6.246 E.00632 ;WIDTH:0.568594 G1 F14558.588 G3 X18.422 Y-6.23 I-.252 J-1.366 E.01701 G1 X17.922 Y-5.73 E.03032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.871 Y-5.929 F30000 M73 P75 R20 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X19.424 Y-5.761 E.01773 G1 X19.979 Y-5.44 E.01972 G1 X20.55 Y-4.896 E.02422 G1 X20.779 Y-4.54 E.01302 G1 X20.779 Y-5.929 E.04268 G1 X18.911 Y-5.929 E.05738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.432 Y-5.599 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.404394 G1 F15000 G1 X20.364 Y-5.559 E.00231 G1 X20.435 Y-5.525 E.00231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.518 Y13.776 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X21.233 Y13.937 E.01677 G1 X20.48 Y13.94 E.03853 G1 X20.435 Y13.872 E.00417 G1 X21.315 Y13.373 E.05181 G1 X21.315 Y12.856 E.02648 G1 X20.184 Y13.497 E.06657 G2 X19.866 Y13.16 I-2.16 J1.72 E.02375 G1 X21.315 Y12.339 E.08528 G1 X21.315 Y11.821 E.02648 G1 X19.476 Y12.864 E.10825 G2 X18.966 Y12.636 I-1.439 J2.533 E.02865 G1 X21.315 Y11.304 E.13827 G1 X21.315 Y10.787 E.02648 G1 X18.268 Y12.514 E.17934 G2 X16.029 Y13.783 I-.061 J2.502 E.13839 G1 X14.776 Y14.494 E.07379 G1 X14.735 Y14.49 E.00211 G1 X14.735 Y14 E.02509 G1 X21.315 Y10.27 E.38731 G1 X21.315 Y9.752 E.02648 G1 X14.735 Y13.483 E.38731 G1 X14.735 Y12.965 E.02648 G1 X21.315 Y9.235 E.38731 G1 X21.315 Y8.718 E.02648 G1 X14.735 Y12.448 E.38731 G1 X14.735 Y11.931 E.02648 G1 X21.315 Y8.2 E.38731 G1 X21.315 Y7.683 E.02648 G1 X14.735 Y11.414 E.38731 G1 X14.735 Y10.896 E.02648 G1 X21.315 Y7.166 E.38731 G1 X21.315 Y6.649 E.02648 G1 X14.735 Y10.379 E.38731 G1 X14.735 Y9.862 E.02648 G1 X21.315 Y6.131 E.38731 G1 X21.315 Y5.614 E.02648 G1 X14.735 Y9.345 E.38731 G1 X14.735 Y8.827 E.02648 G1 X21.315 Y5.097 E.38731 G1 X21.315 Y4.58 E.02648 G1 X14.735 Y8.31 E.38731 G1 X14.735 Y7.793 E.02648 G1 X21.315 Y4.062 E.38731 G1 X21.315 Y3.545 E.02648 G1 X14.735 Y7.275 E.38731 G1 X14.735 Y6.758 E.02648 G1 X21.315 Y3.028 E.38731 G1 X21.315 Y2.51 E.02648 G1 X14.735 Y6.241 E.38731 G1 X14.735 Y5.724 E.02648 G1 X21.315 Y1.993 E.38731 G1 X21.315 Y1.476 E.02648 G1 X14.735 Y5.206 E.38731 G1 X14.735 Y4.689 E.02648 G1 X21.315 Y.959 E.38731 G1 X21.315 Y.441 E.02648 G1 X14.735 Y4.172 E.38731 G1 X14.735 Y3.655 E.02648 G1 X21.315 Y-.076 E.38731 G1 X21.315 Y-.593 E.02648 G1 X14.735 Y3.137 E.38731 G1 X14.735 Y2.62 E.02648 G1 X21.315 Y-1.11 E.38731 G1 X21.315 Y-1.628 E.02648 G1 X14.735 Y2.103 E.38731 G1 X14.735 Y1.585 E.02648 G1 X18.461 Y-.527 E.21931 G2 X20.192 Y-1.508 I-.294 J-2.535 E.10463 G1 X21.518 Y-2.26 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.91 Y-.732 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X14.735 Y1.068 E.18688 G1 X14.735 Y.551 E.02648 G1 X17.083 Y-.78 E.13821 G3 X16.651 Y-1.053 I1.319 J-2.565 E.02617 G1 X14.735 Y.034 E.11282 G1 X14.735 Y-.484 E.02648 G1 X16.316 Y-1.38 E.09306 G3 X16.049 Y-1.746 I1.258 J-1.195 E.02325 G1 X14.735 Y-1.001 E.07737 G1 X14.735 Y-1.518 E.02648 G1 X15.862 Y-2.157 E.06635 G1 X15.771 Y-2.426 E.01454 G1 X15.562 Y-2.504 E.01143 G1 X14.532 Y-1.921 E.0606 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.432 Y17.52 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.404396 ;HEIGHT:0.2 G1 F15000 M106 S255 G1 X20.364 Y17.559 E.00231 G1 X20.435 Y17.594 E.00231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.872 Y17.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X20.779 Y17.929 E.05859 G1 X20.779 Y16.539 E.0427 G1 X20.55 Y16.896 E.01304 G1 X20.096 Y17.35 E.01972 G1 X19.424 Y17.761 E.02423 G1 X18.91 Y17.917 E.01648 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.778 Y17.396 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.609414 G1 F13509.519 G2 X15.794 Y17.492 I-.035 J.055 E.01381 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.271 Y15.672 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X15.271 Y17.929 E.06935 G1 X17.528 Y17.929 E.06934 G1 X16.976 Y17.761 E.01771 G1 X16.421 Y17.44 E.01972 G1 X15.85 Y16.897 E.02422 G1 X15.44 Y16.227 E.02411 G1 X15.283 Y15.71 E.01661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.97 Y14.985 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.564217 G1 F14680.823 G1 X14.963 Y15.46 E.0202 ;WIDTH:0.534138 G1 F15000 G1 X14.94 Y15.675 E.00866 ;WIDTH:0.488482 G1 X14.917 Y15.89 E.00785 ;WIDTH:0.421068 G1 X14.894 Y16.105 E.00666 G1 X14.894 Y18.306 E.06781 G1 X17.098 Y18.306 E.06792 ;WIDTH:0.440078 G1 X17.259 Y18.286 E.00523 ;WIDTH:0.480237 G1 X17.419 Y18.266 E.00576 ;WIDTH:0.520395 G1 X17.58 Y18.246 E.00629 ;WIDTH:0.573394 G1 F14426.858 G1 X17.74 Y18.226 E.00699 G1 X18.521 Y18.23 E.03376 ;WIDTH:0.552537 G1 F15000 G1 X18.716 Y18.249 E.00815 ;WIDTH:0.514669 G1 X18.911 Y18.268 E.00754 ;WIDTH:0.476801 G1 X19.107 Y18.287 E.00693 ;WIDTH:0.420862 G1 X19.302 Y18.306 E.00604 G1 X21.156 Y18.306 E.0571 G1 X21.156 Y16.052 E.06941 ;WIDTH:0.409638 G2 X21.161 Y14.346 I-46.247 J-.994 E.05099 G1 X20.742 Y14.347 E.01251 G1 X20.814 Y14.679 E.01014 G1 X20.814 Y15.321 E.01918 G1 X20.655 Y15.986 E.02045 G1 X20.314 Y16.591 E.02074 G1 X19.882 Y17.032 E.01844 G1 X19.235 Y17.434 E.02277 ;WIDTH:0.442839 G1 X19.019 Y17.518 E.00754 ;WIDTH:0.488517 G1 X18.803 Y17.602 E.00841 ;WIDTH:0.534196 G1 X18.587 Y17.686 E.00927 ;WIDTH:0.564254 G1 F14679.78 G1 X17.879 Y17.702 E.0301 ;WIDTH:0.552538 G1 F15000 G1 X17.712 Y17.639 E.0074 ;WIDTH:0.51467 G1 X17.545 Y17.577 E.00685 ;WIDTH:0.476802 G1 X17.378 Y17.515 E.0063 ;WIDTH:0.421502 G1 X17.21 Y17.453 E.0055 G1 X16.609 Y17.114 E.02131 G1 X16.116 Y16.63 E.0213 G1 X15.767 Y16.038 E.0212 ;WIDTH:0.442827 G1 X15.683 Y15.821 E.00758 ;WIDTH:0.488482 G1 X15.599 Y15.604 E.00845 ;WIDTH:0.534138 G1 X15.514 Y15.387 E.00931 ;WIDTH:0.563543 G1 F14699.833 G1 X15.498 Y14.718 E.02842 G1 X15.062 Y14.965 E.0213 G1 X15.009 Y14.977 E.00229 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F14699.833 G1 X15.062 Y14.965 G1 X15.498 Y14.718 G1 X15.514 Y15.387 ;WIPE_END G1 X16.478 Y7.816 Z11.6 F30000 G1 X18.752 Y-10.052 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z11.6 F30000 G1 X30.752 Y-52.052 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:11.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.8 I-1.134 J.442 P1 F30000 G1 X50 Y-1.736 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.253 Y-1.718 I.004 J1.739 E.00843 G1 X50.34 Y-1.709 E.00289 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.735 I-.663 J-1.607 E.20226 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.293 Y-2.123 I.001 J2.147 E.00975 G1 X50.42 Y-2.111 E.00422 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.143 I-.822 J-1.984 E.25039 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.336 Y-2.556 E.01037 G1 X50.505 Y-2.539 E.00523 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.336 Y-2.556 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.148 Y-1.038 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F15000 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.049 Y.189 G1 X49.049 Y-.189 G1 X49.194 Y-.539 G1 X49.461 Y-.806 G1 X49.811 Y-.951 G1 X49.958 Y-.951 ;WIPE_END G1 X43.144 Y-4.389 Z11.8 F30000 G1 X-51.352 Y-52.052 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z11.8 F30000 G1 X-39.352 Y-10.052 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-38.028 Y-1.994 Z11.8 F30000 G1 X-37.633 Y-.845 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.863 Y-.737 E.0084 G3 X-38.951 Y-5.444 I-.937 J-2.263 E.28211 G3 X-36.4 Y-2.513 I.161 J2.436 E.14909 G3 X-37.575 Y-.879 I-2.4 J-.487 E.06882 G1 X-37.599 Y-.865 E.00091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.813 Y-1.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.019 Y-1.113 E.00752 G3 X-38.924 Y-5.038 I-.781 J-1.887 E.23527 G3 X-36.799 Y-2.593 I.133 J2.031 E.12431 G3 X-37.779 Y-1.232 I-2.001 J-.407 E.05733 G1 X-37.78 Y-1.231 E.00003 G1 X-38.006 Y-1.6 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.185 Y-1.515 E.00609 G3 X-39.605 Y-4.395 I-.622 J-1.483 E.14925 G3 X-38.896 Y-4.604 I.786 J1.356 E.02294 G3 X-37.973 Y-1.623 I.089 J1.606 E.13106 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.185 Y-1.515 G1 X-38.383 Y-1.444 G1 X-38.59 Y-1.403 G1 X-38.8 Y-1.39 G1 X-39.01 Y-1.403 G1 X-39.217 Y-1.444 G1 X-39.416 Y-1.512 G1 X-39.605 Y-1.605 G1 X-39.78 Y-1.722 G1 X-39.839 Y-1.773 ;WIPE_END G1 X-40.24 Y5.848 Z11.8 F30000 G1 X-40.796 Y16.42 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.931 Y16.23 E.00772 G3 X-40.294 Y13.053 I2.122 J-1.227 E.11743 G3 X-38.951 Y12.556 I1.505 J2.003 E.04818 G3 X-40.752 Y16.498 I.143 J2.447 E.33462 G1 X-40.776 Y16.455 E.00163 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.458 Y16.194 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.512 Y16.133 E.00271 G3 X-39.823 Y13.228 I1.703 J-1.13 E.11104 M73 P75 R19 G3 X-38.924 Y12.962 I.998 J1.722 E.03139 G3 X-40.429 Y16.25 I.115 J2.041 E.27883 G1 X-40.439 Y16.23 E.00076 G1 X-40.096 Y15.952 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.199 Y15.808 E.00545 G3 X-39.605 Y13.605 I1.391 J-.806 E.07791 G3 X-38.896 Y13.396 I.786 J1.356 E.02294 G3 X-40.077 Y15.988 I.089 J1.606 E.20294 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.199 Y15.808 G1 X-40.288 Y15.616 G1 X-40.356 Y15.417 G1 X-40.397 Y15.21 G1 X-40.41 Y15 G1 X-40.397 Y14.79 G1 X-40.356 Y14.583 G1 X-40.288 Y14.384 G1 X-40.195 Y14.195 G1 X-40.141 Y14.114 ;WIPE_END G1 X-38.345 Y6.696 Z11.8 F30000 G1 X-35.102 Y-6.698 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.305 Y-3.297 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.457716 G1 F15000 G1 X-38.372 Y-6.365 E.14665 G1 X-38.467 Y-5.96 E.01404 G1 X-38.511 Y-5.916 E.00209 G1 X-38.165 Y-5.571 E.01653 G3 X-36.229 Y-3.635 I-.62 J2.556 E.0973 G1 X-35.764 Y-3.169 E.02226 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.609 Y-.827 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.422693 G1 F15000 G1 X-35.298 Y1.484 E.10115 G1 X-35.298 Y1.589 E.00324 G1 X-35.316 Y1.606 E.00077 G1 X-35.316 Y2.004 E.0123 G1 X-37.849 Y-.529 E.11087 G3 X-38.266 Y-.409 I-.665 J-1.524 E.01347 G1 X-35.316 Y2.541 E.12912 G1 X-35.316 Y3.078 E.01662 G1 X-38.746 Y-.353 E.15015 G3 X-39.341 Y-.411 I-.011 J-2.966 E.01854 G1 X-35.316 Y3.615 E.17619 G1 X-35.316 Y4.152 E.01662 G1 X-40.266 Y-.798 E.21666 G1 X-40.395 Y-.885 E.00481 G1 X-40.63 Y-.65 E.01027 G1 X-41.926 Y-1.946 E.05671 G1 X-41.926 Y-1.922 E.00075 G1 X-35.316 Y4.689 E.28932 G1 X-35.316 Y5.226 E.01662 G1 X-41.934 Y-1.392 E.28967 G1 X-41.934 Y-.855 E.01662 G1 X-35.316 Y5.763 E.28967 G1 X-35.316 Y6.3 E.01662 G1 X-41.934 Y-.318 E.28967 G1 X-41.934 Y.219 E.01662 G1 X-35.316 Y6.838 E.28967 G1 X-35.316 Y7.375 E.01662 G1 X-41.934 Y.756 E.28967 G1 X-41.934 Y1.293 E.01662 G1 X-35.316 Y7.912 E.28967 G1 X-35.316 Y8.449 E.01662 G1 X-41.934 Y1.83 E.28967 G1 X-41.934 Y2.367 E.01662 G1 X-35.316 Y8.986 E.28967 G1 X-35.316 Y9.523 E.01662 G1 X-41.934 Y2.904 E.28967 G1 X-41.934 Y3.441 E.01662 G1 X-35.316 Y10.06 E.28967 G1 X-35.316 Y10.597 E.01662 G1 X-41.934 Y3.978 E.28967 G1 X-41.934 Y4.515 E.01662 G1 X-35.316 Y11.134 E.28967 G1 X-35.316 Y11.671 E.01662 G1 X-41.934 Y5.052 E.28967 G1 X-41.934 Y5.59 E.01662 G1 X-35.316 Y12.208 E.28967 G1 X-35.316 Y12.745 E.01662 G1 X-41.934 Y6.127 E.28967 G1 X-41.934 Y6.664 E.01662 G1 X-35.316 Y13.282 E.28967 G1 X-35.316 Y13.82 E.01662 G1 X-41.934 Y7.201 E.28967 G1 X-41.934 Y7.738 E.01662 G1 X-35.316 Y14.357 E.28967 G1 X-35.316 Y14.393 E.00111 G1 X-35.566 Y14.643 E.01097 G1 X-41.934 Y8.275 E.27871 G1 X-41.934 Y8.812 E.01662 G1 X-38.355 Y12.392 E.15666 G2 X-38.926 Y12.357 I-.45 J2.736 E.01774 G1 X-42.122 Y9.162 E.13985 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.894 Y11.953 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.56914 G1 F14543.463 G2 X-40.881 Y12.045 I-.032 J.051 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.192 Y12.107 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-41.379 Y10.92 E.05159 G1 X-41.379 Y13.073 E.06616 G1 X-40.818 Y12.491 E.02482 G1 X-40.226 Y12.128 E.02136 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.501 Y12.264 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-41.756 Y10.009 E.09799 G1 X-41.756 Y13.85 E.11802 G1 X-41.492 Y13.713 E.00913 G1 X-41.36 Y13.786 E.00464 G1 X-41.072 Y13.287 E.01767 G1 X-40.552 Y12.758 E.02282 G1 X-39.912 Y12.381 E.02282 G1 X-39.539 Y12.275 E.01189 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.393 Y14.406 F30000 ;TYPE:Gap infill ;WIDTH:0.541428 G1 F12000 G1 X-41.689 Y14.616 E.01474 G2 X-41.689 Y15.384 I5.912 J.384 E.03122 G1 X-41.393 Y15.594 E.01474 G1 X-40.322 Y17.88 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.518194 G1 F15000 G3 X-41.33 Y17.042 I1.217 J-2.489 E.05122 G1 X-41.33 Y17.88 E.03242 G1 X-40.362 Y17.88 E.03747 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.236 Y17.496 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.445154 G1 F15000 G2 X-36.231 Y17.574 I-.023 J.041 E.0066 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.871 Y16.33 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-36.201 Y16.901 E.02028 G1 X-36.782 Y17.509 E.02583 G1 X-37.47 Y17.929 E.02478 G1 X-35.871 Y17.929 E.04914 G1 X-35.871 Y16.37 E.04791 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.52 Y15.033 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.472325 G1 F15000 G1 X-35.653 Y15.06 E.00473 G1 X-35.95 Y14.786 E.01412 G1 X-35.95 Y15.347 E.01963 ;WIDTH:0.459243 G1 X-36.056 Y15.707 E.01272 ;WIDTH:0.421883 G1 X-36.162 Y16.066 E.01158 G1 X-36.528 Y16.713 E.02294 G1 X-37.048 Y17.242 E.02294 G1 X-37.688 Y17.619 E.02294 ;WIDTH:0.432556 G1 X-38.043 Y17.731 E.0118 ;WIDTH:0.466764 G1 X-38.398 Y17.842 E.01284 G1 X-39.147 Y17.85 E.02588 ;WIDTH:0.459245 G1 X-39.507 Y17.744 E.01272 ;WIDTH:0.420711 G1 X-39.866 Y17.638 E.01154 G1 X-40.372 Y17.366 E.0177 G1 X-40.798 Y17.027 E.01675 G1 X-41.252 Y16.444 E.02273 G1 X-41.358 Y16.214 E.0078 G1 X-41.499 Y16.287 E.00488 G1 X-41.756 Y16.15 E.00898 G1 X-41.756 Y18.306 E.06638 G1 X-39.954 Y18.306 E.05547 ;WIDTH:0.434942 G1 X-39.607 Y18.291 E.01109 ;WIDTH:0.472672 G3 X-38.453 Y18.28 I.695 J12.094 E.04043 ;WIDTH:0.459245 G1 X-38.05 Y18.293 E.0137 ;WIDTH:0.421121 G1 X-35.494 Y18.306 E.07875 G1 X-35.494 Y16.154 E.06632 ;WIDTH:0.432555 G1 X-35.507 Y15.807 E.01102 ;WIDTH:0.458344 G3 X-35.52 Y15.073 I10.876 J-.567 E.02485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.613 Y-1.918 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-41.536 Y-1.853 E.0028 G1 X-41.352 Y-1.823 E.00517 G1 X-40.738 Y-1.075 E.02679 G1 X-40.659 Y-1.001 E.00301 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.393 Y-2.406 F30000 ;TYPE:Gap infill ;WIDTH:0.541433 G1 F12000 G1 X-41.689 Y-2.616 E.01474 G3 X-41.689 Y-3.384 I5.912 J-.384 E.03122 G1 X-41.393 Y-3.594 E.01474 G1 X-40.314 Y-5.879 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.518601 G1 F15000 G1 X-41.329 Y-5.879 E.03938 G1 X-41.329 Y-5.067 E.03148 G1 X-40.853 Y-5.544 E.02611 G1 X-40.348 Y-5.858 E.02308 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.759 Y-6.28 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.471268 G1 F15000 G1 X-39.26 Y-6.281 E.01747 ;WIDTH:0.457667 G1 X-39.607 Y-6.293 E.01173 ;WIDTH:0.420639 G1 X-41.756 Y-6.306 E.06614 G1 X-41.756 Y-4.15 E.06637 G1 X-41.492 Y-4.287 E.00915 G1 X-41.36 Y-4.214 E.00465 G1 X-41.072 Y-4.713 E.0177 G3 X-40.513 Y-5.272 I5.527 J4.967 E.02437 G1 X-39.912 Y-5.619 E.02136 ;WIDTH:0.432555 G1 X-39.557 Y-5.731 E.0118 ;WIDTH:0.462665 G1 X-39.202 Y-5.842 E.01271 G1 X-38.909 Y-5.851 E.01003 G1 X-38.936 Y-5.984 E.00465 G1 X-38.79 Y-6.17 E.0081 G1 X-38.77 Y-6.241 E.00252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.927 Y-5.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.531751 G1 F15000 G1 X-35.927 Y-5.873 E.03324 G1 X-36.762 Y-5.873 E.03324 G1 X-35.955 Y-5.067 E.04542 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.494 Y-3.993 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-35.494 Y-6.306 E.07106 G1 X-37.807 Y-6.306 E.07106 G1 X-35.522 Y-4.021 E.09927 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.913 Y-.204 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.502768 G1 F15000 G1 X-35.913 Y-1.498 E.04847 G1 X-36.016 Y-1.301 E.00831 G1 X-36.439 Y-.751 E.026 G1 X-35.94 Y-.233 E.02693 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.494 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-35.494 Y-1.434 E.06883 ;WIDTH:0.436564 G1 X-35.511 Y-1.781 E.01114 ;WIDTH:0.480136 G3 X-35.525 Y-2.98 I21.977 J-.865 E.04273 G1 X-35.641 Y-3.008 E.00425 G1 X-35.821 Y-2.857 E.00838 G1 X-35.936 Y-2.882 E.00419 ;WIDTH:0.495141 G1 X-36.002 Y-2.282 E.02226 ;WIDTH:0.486179 G1 X-36.163 Y-1.94 E.01364 ;WIDTH:0.424523 G1 X-36.324 Y-1.599 E.01174 G3 X-36.803 Y-.973 I-9.031 J-6.418 E.02452 G1 X-37.065 Y-.764 E.01041 G1 X-35.522 Y.778 E.06783 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-36.937 Y-.636 ;WIPE_END G1 X-34.107 Y6.453 Z11.8 F30000 G1 X-15.232 Y53.745 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z11.8 F30000 G1 X-5.6 Y52.94 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.259 J1.925 E.26952 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290581 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z11.8 F30000 G1 X-3.671 Y51.454 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00736 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z11.8 F30000 G1 X-2.945 Y22.045 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.895 Y17.226 Z11.8 F30000 G1 X18.619 Y-.586 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.52 Y-.572 E.00334 G3 X16.847 Y-5.041 I-.32 J-2.428 E.21831 G3 X18.049 Y-5.444 I1.353 J2.042 E.04254 G3 X18.834 Y-.634 I.151 J2.444 E.23897 G1 X18.658 Y-.595 E.00597 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.54 Y-.986 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.467 Y-.972 E.00246 G3 X17.177 Y-4.772 I-.276 J-2.025 E.187 G3 X18.076 Y-5.038 I.998 J1.722 E.03139 G3 X18.729 Y-1.026 I.115 J2.041 E.19876 G1 X18.579 Y-.994 E.00509 G1 X18.455 Y-1.412 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.41 Y-1.404 E.0014 G3 X17.395 Y-4.395 I-.217 J-1.594 E.13631 G3 X18.104 Y-4.604 I.786 J1.355 E.02294 G3 X18.616 Y-1.446 I.089 J1.606 E.14484 G1 X18.494 Y-1.42 E.00384 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.41 Y-1.404 G1 X18.2 Y-1.39 G1 X17.99 Y-1.403 G1 X17.783 Y-1.444 G1 X17.584 Y-1.512 G1 X17.395 Y-1.605 G1 X17.22 Y-1.722 G1 X17.061 Y-1.861 G1 X16.922 Y-2.02 G1 X16.805 Y-2.195 G1 X16.797 Y-2.211 ;WIPE_END G1 X17.023 Y5.418 Z11.8 F30000 G1 X17.375 Y17.306 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.26 Y17.27 E.00402 G3 X16.706 Y13.053 I.932 J-2.267 E.17082 G3 X18.049 Y12.556 I1.505 J2.003 E.04818 G3 X17.564 Y17.373 I.143 J2.447 E.28125 G1 X17.413 Y17.32 E.00532 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.506 Y16.921 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.416 Y16.894 E.00313 G3 X17.177 Y13.228 I.775 J-1.891 E.15143 G3 X18.076 Y12.962 I.998 J1.722 E.03139 G3 X17.67 Y16.979 I.115 J2.041 E.2343 G1 X17.544 Y16.934 E.00443 G1 X17.646 Y16.509 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.583 Y16.49 E.00203 G3 X17.395 Y13.605 I.61 J-1.488 E.11039 G3 X18.104 Y13.396 I.786 J1.356 E.02294 G3 X17.783 Y16.557 I.089 J1.606 E.17075 G1 X17.684 Y16.522 E.00323 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.583 Y16.49 G1 X17.395 Y16.395 G1 X17.22 Y16.278 G1 X17.061 Y16.139 G1 X16.922 Y15.98 G1 X16.805 Y15.805 G1 X16.712 Y15.616 G1 X16.644 Y15.417 G1 X16.603 Y15.21 G1 X16.59 Y15.002 ;WIPE_END G1 X15.859 Y7.405 Z11.8 F30000 G1 X14.502 Y-6.698 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X19.766 Y-5.875 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.519627 G1 F15000 G3 X20.568 Y-5.254 I-2.885 J4.557 E.03943 G1 X20.729 Y-5.045 E.01027 G1 X20.729 Y-5.879 E.03241 G2 X19.806 Y-5.876 I-.398 J18.138 E.03585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.675 Y-5.59 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.426308 G1 F15000 G1 X15.604 Y-5.549 E.00259 G1 X15.679 Y-5.514 E.0026 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.271 Y-4.294 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X15.449 Y-4.673 E.01286 G1 X15.872 Y-5.224 E.02132 G1 X16.527 Y-5.751 E.02583 G1 X16.906 Y-5.929 E.01286 G1 X15.271 Y-5.929 E.05022 G1 X15.271 Y-4.334 E.04899 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.917 Y-2.799 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.474437 G1 F15000 G1 X15.421 Y-2.295 E.02503 G1 X15.339 Y-2.914 E.02194 G1 X15.402 Y-3.718 E.02837 ;WIDTH:0.486178 G1 X15.563 Y-4.06 E.01364 ;WIDTH:0.424469 G1 X15.724 Y-4.401 E.01174 G1 X16.171 Y-4.994 E.02309 G1 X16.756 Y-5.452 E.02309 ;WIDTH:0.436565 G1 X17.092 Y-5.612 E.01193 ;WIDTH:0.472912 G1 X17.427 Y-5.773 E.01303 G1 X18.173 Y-5.866 E.02633 ;WIDTH:0.47476 G1 X18.918 Y-5.798 E.02635 G1 X19.601 Y-5.476 E.02657 ;WIDTH:0.419999 G3 X20.229 Y-4.994 I-5.022 J7.195 E.02433 G1 X20.652 Y-4.444 E.02132 G1 X20.758 Y-4.214 E.00779 G1 X20.899 Y-4.287 E.00487 G1 X21.156 Y-4.15 E.00896 G1 X21.156 Y-6.306 E.06625 G1 X19.766 Y-6.306 E.0427 ;WIDTH:0.435183 G1 X19.419 Y-6.291 E.0111 ;WIDTH:0.469896 G3 X18.255 Y-6.284 I-.639 J-10.625 E.04054 ;WIDTH:0.474708 G3 X16.634 Y-6.306 I-.681 J-9.848 E.05711 ;WIDTH:0.419999 G1 X14.894 Y-6.306 E.05345 G1 X14.894 Y-4.566 E.05345 ;WIDTH:0.435184 G1 X14.909 Y-4.219 E.0111 ;WIDTH:0.470285 G3 X14.917 Y-2.839 I-36.836 J.899 E.04808 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.156 Y-.711 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.422693 G1 F15000 G1 X21.352 Y1.484 E.0961 G1 X21.352 Y1.589 E.00324 G1 X21.334 Y1.606 E.00077 G1 X21.334 Y2.004 E.0123 G1 X18.89 Y-.441 E.10699 G3 X18.429 Y-.364 I-.918 J-4.099 E.01445 G1 X21.334 Y2.541 E.12714 G1 X21.334 Y3.078 E.01662 G1 X17.887 Y-.37 E.15089 G3 X17.152 Y-.568 I.373 J-2.848 E.02363 G1 X21.334 Y3.615 E.18306 G1 X21.334 Y4.152 E.01662 G1 X14.716 Y-2.467 E.28967 G1 X14.716 Y-1.93 E.01662 G1 X21.334 Y4.689 E.28967 G1 X21.334 Y5.226 E.01662 G1 X14.716 Y-1.392 E.28967 G1 X14.716 Y-.855 E.01662 G1 X21.334 Y5.763 E.28967 G1 X21.334 Y6.3 E.01662 G1 X14.716 Y-.318 E.28967 G1 X14.716 Y.219 E.01662 G1 X21.334 Y6.838 E.28967 G1 X21.334 Y7.375 E.01662 G1 X14.716 Y.756 E.28967 G1 X14.716 Y1.293 E.01662 G1 X21.334 Y7.912 E.28967 G1 X21.334 Y8.449 E.01662 G1 X14.716 Y1.83 E.28967 G1 X14.716 Y2.367 E.01662 G1 X21.334 Y8.986 E.28967 G1 X21.334 Y9.523 E.01662 G1 X14.716 Y2.904 E.28967 G1 X14.716 Y3.441 E.01662 G1 X21.334 Y10.06 E.28967 G1 X21.334 Y10.597 E.01662 G1 X14.716 Y3.978 E.28967 G1 X14.716 Y4.515 E.01662 G1 X21.334 Y11.134 E.28967 G1 X21.334 Y11.671 E.01662 G1 X14.716 Y5.052 E.28967 G1 X14.716 Y5.59 E.01662 G1 X21.334 Y12.208 E.28967 G1 X21.334 Y12.745 E.01662 G1 X14.716 Y6.127 E.28967 G1 X14.716 Y6.664 E.01662 G1 X21.334 Y13.282 E.28967 G1 X21.334 Y13.82 E.01662 G1 X14.716 Y7.201 E.28967 G1 X14.716 Y7.738 E.01662 G1 X20.898 Y13.92 E.27056 G1 X20.714 Y14.178 E.00979 G2 X18.879 Y12.438 I-2.535 J.836 E.08154 G1 X14.716 Y8.275 E.1822 G1 X14.716 Y8.812 E.01662 G1 X18.256 Y12.353 E.15497 G2 X17.758 Y12.391 I-.01 J3.148 E.0155 G1 X14.528 Y9.162 E.14132 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.894 Y10.009 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X14.894 Y13.846 E.11789 ;WIDTH:0.434941 G1 X14.909 Y14.193 E.01109 ;WIDTH:0.472667 G3 X14.92 Y15.347 I-12.095 J.695 E.04043 ;WIDTH:0.459242 G1 X14.907 Y15.75 E.0137 ;WIDTH:0.421121 G1 X14.894 Y18.306 E.07875 G1 X17.046 Y18.306 E.06632 ;WIDTH:0.434942 G1 X17.393 Y18.291 E.01109 ;WIDTH:0.472671 G3 X18.547 Y18.28 I.695 J12.094 E.04043 ;WIDTH:0.459245 G1 X18.95 Y18.293 E.0137 ;WIDTH:0.420768 G2 X21.156 Y18.306 I1.304 J-34.005 E.06792 G1 X21.156 Y16.15 E.06639 G1 X20.892 Y16.287 E.00915 G1 X20.76 Y16.214 E.00465 G1 X20.472 Y16.713 E.01771 G3 X19.913 Y17.272 I-5.527 J-4.968 E.02438 G1 X19.312 Y17.619 E.02137 ;WIDTH:0.432556 G1 X18.957 Y17.731 E.0118 ;WIDTH:0.466764 G1 X18.602 Y17.842 E.01284 G1 X17.853 Y17.85 E.02588 ;WIDTH:0.459245 G1 X17.493 Y17.744 E.01272 ;WIDTH:0.421883 G1 X17.134 Y17.638 E.01158 G1 X16.487 Y17.272 E.02294 G1 X15.958 Y16.752 E.02294 G1 X15.581 Y16.112 E.02294 ;WIDTH:0.432555 G1 X15.469 Y15.757 E.0118 ;WIDTH:0.466761 G1 X15.358 Y15.402 E.01284 G1 X15.35 Y14.653 E.02588 ;WIDTH:0.459242 G1 X15.456 Y14.293 E.01272 ;WIDTH:0.421637 G1 X15.562 Y13.934 E.01157 G1 X15.928 Y13.287 E.02292 G1 X16.415 Y12.791 E.02148 G1 X17.088 Y12.381 E.02432 G1 X17.219 Y12.335 E.00428 G1 X14.922 Y10.038 E.10024 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.271 Y10.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X15.271 Y13.67 E.08452 G1 X15.601 Y13.099 E.02028 G1 X16.149 Y12.524 E.02439 G1 X16.587 Y12.235 E.01612 G1 X15.3 Y10.948 E.05593 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.623 Y11.768 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.368381 G1 F15000 G1 X15.623 Y12.554 E.02084 G1 X16.026 Y12.171 E.01474 G1 X15.651 Y11.796 E.01408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.271 Y16.33 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X15.271 Y17.929 E.04914 G1 X16.87 Y17.929 E.04914 G1 X16.299 Y17.599 E.02028 G1 X15.691 Y17.018 E.02583 G1 X15.292 Y16.364 E.02355 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.686 Y17.496 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44515 G1 F15000 G2 X15.691 Y17.574 I-.023 J.041 E.0066 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.714 Y17.879 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.518604 G1 F15000 G1 X20.729 Y17.879 E.03938 G1 X20.729 Y17.067 E.03148 G1 X20.253 Y17.544 E.02611 G1 X19.748 Y17.858 E.02308 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.793 Y15.594 F30000 ;TYPE:Gap infill ;WIDTH:0.541427 G1 F12000 G1 X21.089 Y15.384 E.01474 G2 X21.089 Y14.616 I-5.912 J-.384 E.03122 G1 X20.793 Y14.406 E.01474 G1 X19.734 Y-.616 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X21.156 Y.806 E.0618 G1 X21.156 Y-1.85 E.08163 G1 X20.892 Y-1.713 E.00913 G1 X20.76 Y-1.786 E.00464 G1 X20.472 Y-1.287 E.01767 G1 X19.952 Y-.758 E.02282 G1 X19.767 Y-.638 E.00676 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.31 Y-.578 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427701 G1 F15000 G1 X20.775 Y-.113 E.0206 G1 X20.775 Y-1.061 E.02973 G1 X20.338 Y-.607 E.01977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.793 Y-2.406 F30000 ;TYPE:Gap infill ;WIDTH:0.541432 G1 F12000 G1 X21.089 Y-2.616 E.01474 G2 X21.089 Y-3.384 I-5.912 J-.384 E.03122 G1 X20.793 Y-3.594 E.01474 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X21.089 Y-3.384 G1 X21.101 Y-2.984 G1 X21.089 Y-2.616 G1 X20.793 Y-2.406 ;WIPE_END G1 X18.825 Y-9.78 Z11.8 F30000 G1 X18.752 Y-10.052 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z11.8 F30000 G1 X30.752 Y-52.052 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:11.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;11.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12 I-1.134 J.442 P1 F30000 G1 X50 Y-1.736 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.25 Y-1.718 I.004 J1.739 E.00831 G1 X50.34 Y-1.709 E.00301 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.735 I-.663 J-1.607 E.20225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.29 Y-2.123 I.001 J2.147 E.00964 G1 X50.42 Y-2.111 E.00434 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.984 E.25039 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.332 Y-2.556 E.01026 G1 X50.505 Y-2.539 E.00533 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.332 Y-2.556 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.868 Y1.336 Z12 F30000 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F15000 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X43.194 Y-2.945 Z12 F30000 G1 X-51.352 Y-52.052 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z12 F30000 G1 X-39.352 Y-10.052 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-38.008 Y-2.001 Z12 F30000 G1 X-37.545 Y-.666 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.785 Y-.551 E.00885 G3 X-40.677 Y-4.877 I-1.022 J-2.446 E.24227 G3 X-39.006 Y-5.641 I1.859 J1.856 E.06227 G3 X-37.475 Y-.705 I.199 J2.644 E.23658 G1 X-37.51 Y-.685 E.00133 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.751 Y-1.021 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.048 Y-.887 E.01083 G3 X-40.912 Y-2.248 I-.751 J-2.112 E.11682 G3 X-38.979 Y-5.235 I2.111 J-.752 E.1363 G3 X-37.679 Y-1.058 I.179 J2.235 E.20067 G1 X-37.715 Y-1.04 E.00135 G1 X-37.917 Y-1.421 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.109 Y-1.331 E.0065 G3 X-39.705 Y-4.568 I-.699 J-1.667 E.16772 G3 X-38.951 Y-4.801 I.882 J1.521 E.02447 G3 X-37.885 Y-1.444 I.143 J1.802 E.14912 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.109 Y-1.331 G1 X-38.331 Y-1.251 G1 X-38.564 Y-1.205 G1 X-38.8 Y-1.19 G1 X-39.036 Y-1.205 G1 X-39.269 Y-1.251 G1 X-39.493 Y-1.327 G1 X-39.705 Y-1.432 G1 X-39.781 Y-1.483 ;WIPE_END G1 X-40.281 Y6.133 Z12 F30000 G1 X-40.962 Y16.531 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-41.094 Y16.325 E.00814 G3 X-40.571 Y13.03 I2.294 J-1.324 E.11969 G3 X-39.006 Y12.359 I1.726 J1.865 E.0576 G3 X-40.902 Y16.613 I.206 J2.641 E.36346 G1 X-40.938 Y16.564 E.00203 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.624 Y16.305 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.741 Y16.121 E.00726 G3 X-40.825 Y14.038 I1.941 J-1.121 E.07192 G3 X-38.979 Y12.765 I2.005 J.934 E.07798 G3 X-40.578 Y16.365 I.179 J2.235 E.30769 G1 X-40.599 Y16.337 E.00115 G1 X-40.262 Y16.064 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.373 Y15.908 E.00587 G3 X-39.705 Y13.432 I1.565 J-.906 E.08759 G3 X-38.951 Y13.199 I.917 J1.636 E.02444 G3 X-40.241 Y16.105 I.143 J1.803 E.22977 G1 X-40.244 Y16.099 E.00021 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.373 Y15.908 G1 X-40.473 Y15.693 G1 X-40.549 Y15.469 G1 X-40.595 Y15.236 G1 X-40.61 Y15 G1 X-40.595 Y14.764 G1 X-40.549 Y14.531 G1 X-40.473 Y14.307 G1 X-40.423 Y14.207 ;WIPE_END G1 X-38.541 Y6.811 Z12 F30000 G1 X-35.102 Y-6.698 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-40.593 Y-5.92 Z12 F30000 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.437078 G1 F15000 G1 X-41.37 Y-5.92 E.02498 G1 X-41.37 Y-5.249 E.02157 G1 X-41.171 Y-5.477 E.00973 G1 X-40.624 Y-5.896 E.02212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.926 Y-4.928 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.528852 G1 F15000 G1 X-35.926 Y-5.874 E.03748 G1 X-36.872 Y-5.874 E.03748 G1 X-36.401 Y-5.513 E.0235 G1 X-35.951 Y-4.959 E.02828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.474 Y-2.532 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.380253 G1 F15000 G2 X-35.49 Y-3.788 I-12.76 J-.464 E.03453 ;WIDTH:0.418751 G3 X-35.494 Y-6.306 I242.375 J-1.681 E.07711 G3 X-37.914 Y-6.309 I-.837 J-273.083 E.07412 ;WIDTH:0.400623 G1 X-38.336 Y-6.322 E.01231 ;WIDTH:0.382835 G2 X-39.588 Y-6.31 I-.528 J10.473 E.03469 ;WIDTH:0.419078 G3 X-41.756 Y-6.306 I-1.506 J-208.725 E.06645 G1 X-41.756 Y-4.56 E.05352 G1 X-41.444 Y-4.513 E.00965 G1 X-40.971 Y-5.136 E.024 G1 X-40.344 Y-5.625 E.02437 G1 X-39.611 Y-5.932 E.02437 ;WIDTH:0.401081 G1 X-39.216 Y-5.974 E.01159 ;WIDTH:0.382908 G1 X-38.821 Y-6.017 E.01101 G1 X-38.036 Y-5.943 E.02183 ;WIDTH:0.418078 G1 X-37.299 Y-5.65 E.02427 G1 X-36.664 Y-5.171 E.0243 G1 X-36.175 Y-4.544 E.0243 G1 X-35.868 Y-3.811 E.0243 ;WIDTH:0.400626 G1 X-35.826 Y-3.416 E.01158 ;WIDTH:0.373402 G1 X-35.783 Y-3.021 E.0107 G1 X-35.869 Y-2.268 E.0204 G1 X-35.571 Y-2.55 E.01104 G1 X-35.513 Y-2.54 E.0016 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.666 Y-.099 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-39.988 Y-.196 E.01032 G1 X-40.634 Y-.569 E.02293 G1 X-41.201 Y-1.127 E.02443 G1 X-41.433 Y-1.494 E.01334 G1 X-41.756 Y-1.44 E.01005 G1 X-41.756 Y1.991 E.10542 G1 X-39.695 Y-.071 E.08957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.337 Y.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-40.823 Y-.243 E.01725 G1 X-41.379 Y-.771 E.02357 G1 X-41.379 Y1.08 E.05689 G1 X-40.365 Y.066 E.04405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.956 Y.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4587 G1 F15000 G2 X-40.95 Y.158 I-.024 J.042 E.00709 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.69 Y-1.849 F30000 ;TYPE:Gap infill ;WIDTH:0.436835 G1 F12000 G1 X-41.747 Y-2.197 E.01133 ;WIDTH:0.414316 G3 X-41.769 Y-2.409 I3.222 J-.438 E.00647 ;WIDTH:0.374864 G1 X-41.788 Y-2.596 E.00508 ;WIDTH:0.341594 G3 X-41.789 Y-3.383 I8.711 J-.408 E.01916 ;WIDTH:0.372924 G3 X-41.769 Y-3.591 I3.184 J.199 E.0056 ;WIDTH:0.411688 G1 X-41.751 Y-3.778 E.00564 ;WIDTH:0.433468 G1 X-41.747 Y-3.803 E.00082 ;WIDTH:0.458633 G1 X-41.69 Y-4.151 E.01196 G1 X-35.128 Y10.346 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.422693 G1 F15000 G1 X-37.338 Y12.556 E.0967 G2 X-37.693 Y12.374 I-.867 J1.258 E.01239 M73 P76 R19 G1 X-35.316 Y9.996 E.10406 G1 X-35.316 Y9.459 E.01662 G1 X-38.096 Y12.24 E.12169 G2 X-38.559 Y12.165 I-.514 J1.719 E.01454 G1 X-35.316 Y8.922 E.14193 G1 X-35.316 Y8.385 E.01662 G1 X-39.099 Y12.169 E.1656 G2 X-39.805 Y12.337 I.372 J3.123 E.02248 G1 X-35.316 Y7.848 E.19646 G1 X-35.316 Y7.311 E.01662 G1 X-41.66 Y13.655 E.27765 G1 X-41.952 Y13.607 E.00916 G1 X-41.952 Y13.41 E.00609 G1 X-35.316 Y6.774 E.29044 G1 X-35.316 Y6.237 E.01662 G1 X-41.952 Y12.873 E.29044 G1 X-41.952 Y12.336 E.01662 G1 X-35.316 Y5.7 E.29044 G1 X-35.316 Y5.162 E.01662 G1 X-41.952 Y11.799 E.29044 G1 X-41.952 Y11.262 E.01662 G1 X-35.316 Y4.625 E.29044 G1 X-35.316 Y4.088 E.01662 G1 X-41.952 Y10.725 E.29044 G1 X-41.952 Y10.188 E.01662 G1 X-35.316 Y3.551 E.29044 G1 X-35.316 Y3.014 E.01662 G1 X-41.952 Y9.65 E.29044 G1 X-41.952 Y9.113 E.01662 G1 X-35.316 Y2.477 E.29044 G1 X-35.316 Y1.94 E.01662 G1 X-41.952 Y8.576 E.29044 G1 X-41.952 Y8.039 E.01662 G1 X-35.316 Y1.403 E.29044 G1 X-35.316 Y.866 E.01662 G1 X-41.952 Y7.502 E.29044 G1 X-41.952 Y6.965 E.01662 G1 X-35.316 Y.329 E.29044 G1 X-35.316 Y-.208 E.01662 G1 X-41.952 Y6.428 E.29044 G1 X-41.952 Y5.891 E.01662 G1 X-35.316 Y-.745 E.29044 G1 X-35.316 Y-1.282 E.01662 G1 X-41.952 Y5.354 E.29044 G1 X-41.952 Y4.817 E.01662 G1 X-35.316 Y-1.82 E.29044 G1 X-35.316 Y-1.892 E.00223 G1 X-35.494 Y-2.178 E.01045 G1 X-41.952 Y4.28 E.28261 G1 X-41.952 Y3.743 E.01662 G1 X-37.968 Y-.242 E.17437 G1 X-38.382 Y-.149 E.01314 G1 X-38.597 Y-.149 E.00666 G1 X-41.952 Y3.205 E.14682 G1 X-41.952 Y2.668 E.01662 G1 X-38.954 Y-.329 E.1312 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.494 Y11.194 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410097 G1 F15000 G1 X-36.913 Y12.612 E.06002 G1 X-36.548 Y12.958 E.01504 G1 X-36.173 Y13.459 E.01871 G1 X-35.938 Y13.975 E.01699 G1 X-35.804 Y14.586 E.01871 G1 X-35.801 Y15.373 E.02354 G1 X-35.977 Y16.143 E.02362 G1 X-36.369 Y16.834 E.02379 G1 X-36.927 Y17.401 E.02379 G1 X-37.612 Y17.804 E.02379 G1 X-38.383 Y17.996 E.02379 G1 X-39.173 Y17.999 E.02363 G1 X-39.943 Y17.823 E.02362 G1 X-40.634 Y17.431 E.02379 G1 X-41.201 Y16.873 E.02379 G1 X-41.433 Y16.506 E.01299 G1 X-41.756 Y16.56 E.00978 G1 X-41.756 Y18.306 E.05225 G3 X-38.427 Y18.329 I-.27 J275.103 E.0996 G3 X-35.494 Y18.306 I1.883 J52.178 E.08776 G3 X-35.471 Y14.627 I272.405 J-.106 E.11008 G1 X-35.494 Y13.953 E.02017 G1 X-35.494 Y11.234 E.08137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.881 Y12.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.439024 G1 F15000 G1 X-36.358 Y12.605 E.0218 G1 X-35.881 Y13.204 E.02473 G1 X-35.881 Y12.167 E.03347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.931 Y16.948 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.538982 G1 F15000 G1 X-36.09 Y17.182 E.01145 G1 X-36.618 Y17.71 E.03016 G1 X-36.852 Y17.869 E.01144 G1 X-35.931 Y17.869 E.03723 G1 X-35.931 Y16.988 E.03562 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.557 Y17.921 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.436468 G1 F15000 G1 X-40.946 Y17.673 E.01478 G1 X-41.371 Y17.249 E.01926 G1 X-41.371 Y17.921 E.02154 G1 X-40.597 Y17.921 E.02481 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.69 Y16.151 F30000 ;TYPE:Gap infill ;WIDTH:0.436836 G1 F12000 G1 X-41.747 Y15.803 E.01133 ;WIDTH:0.414317 G3 X-41.769 Y15.591 I3.224 J-.438 E.00647 ;WIDTH:0.374865 G1 X-41.788 Y15.404 E.00508 ;WIDTH:0.341595 G3 X-41.789 Y14.617 I8.711 J-.408 E.01916 ;WIDTH:0.372925 G3 X-41.769 Y14.409 I3.185 J.199 E.0056 ;WIDTH:0.411691 G1 X-41.751 Y14.222 E.00564 ;WIDTH:0.433471 G1 X-41.747 Y14.197 E.00082 ;WIDTH:0.458634 G1 X-41.69 Y13.849 E.01196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.747 Y14.197 ;WIPE_END G1 X-37.497 Y20.536 Z12 F30000 G1 X-15.232 Y53.745 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28689 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z12 F30000 G1 X-5.6 Y52.94 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.259 J1.925 E.2695 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-18.286 Y55.484 I-2.665 J-.778 E.15004 G3 X-14.359 Y52.21 I1.257 J-2.485 E.33857 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290589 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.199 E.01235 G1 X-18.423 Y53.675 E.01528 G1 X-18.262 Y53.943 E.00962 G1 X-17.975 Y54.231 E.0125 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-18.112 Y52.552 I.148 J1.179 E.03824 G1 X-18.191 Y52.986 E.01356 G2 X-18.019 Y53.615 I1.491 J-.069 E.0202 G1 X-17.743 Y53.929 E.01285 G2 X-16.101 Y53.713 I.713 J-.929 E.05653 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.424 Y52.322 E.00981 G1 X-17.657 Y52.519 E.00939 G1 X-17.791 Y52.811 E.00987 G1 X-17.814 Y53.087 E.00852 G1 X-17.663 Y53.476 E.01281 G1 X-17.419 Y53.681 E.00979 G1 X-17.133 Y53.784 E.00935 G1 X-16.826 Y53.757 E.00948 G1 X-16.549 Y53.627 E.00941 G1 X-16.313 Y53.327 E.01173 G1 X-16.196 Y53.016 E.01021 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.137 Y52.607 E.00654 G1 X-17.32 Y52.714 E.00652 G1 X-17.427 Y52.908 E.00681 G1 X-17.408 Y53.126 E.00672 G1 X-17.313 Y53.292 E.00588 G1 X-17.133 Y53.394 E.00634 G1 X-16.924 Y53.393 E.00645 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z12 F30000 G1 X-3.671 Y51.454 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.602 E.01233 G1 X-2.226 Y52.224 E.01256 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.352 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.792 Y53.101 E.00949 G1 X-2.792 Y52.899 E.00621 G1 X-2.886 Y52.604 E.0095 G1 X-3.093 Y52.378 E.00944 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.166 Y52.948 E.00487 G1 X-3.248 Y52.752 E.00652 G1 X-3.415 Y52.624 E.00647 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.248 Y52.752 G1 X-3.166 Y52.948 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-3.723 Y45.275 Z12 F30000 G1 X-2.945 Y22.045 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.923 Y17.252 Z12 F30000 G1 X18.653 Y-.39 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.546 Y-.374 E.00361 G3 X16.429 Y-4.97 I-.346 J-2.626 E.22319 G3 X17.994 Y-5.641 I1.726 J1.865 E.0576 G3 X18.886 Y-.442 I.206 J2.641 E.25986 G1 X18.693 Y-.398 E.00656 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.574 Y-.789 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.493 Y-.774 E.00273 G3 X16.088 Y-2.249 I-.291 J-2.225 E.10121 G3 X18.021 Y-5.235 I2.113 J-.751 E.13627 G3 X18.781 Y-.831 I.182 J2.236 E.22042 G1 X18.613 Y-.797 E.00569 G1 X18.489 Y-1.216 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.436 Y-1.207 E.00165 G3 X17.295 Y-4.568 I-.244 J-1.791 E.15319 G3 X18.049 Y-4.801 I.882 J1.522 E.02447 G3 X18.668 Y-1.254 I.143 J1.802 E.1641 G1 X18.528 Y-1.224 E.00439 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.436 Y-1.207 G1 X18.2 Y-1.19 G1 X17.964 Y-1.205 G1 X17.731 Y-1.251 G1 X17.43 Y-1.365 G1 X17.295 Y-1.432 G1 X17.098 Y-1.564 G1 X16.92 Y-1.72 G1 X16.764 Y-1.898 G1 X16.757 Y-1.908 ;WIPE_END G1 X16.967 Y5.721 Z12 F30000 G1 X17.291 Y17.489 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.185 Y17.452 E.00375 G3 X16.429 Y13.03 I1.017 J-2.449 E.17734 G3 X17.994 Y12.359 I1.726 J1.865 E.0576 G3 X17.513 Y17.563 I.207 J2.643 E.30628 G1 X17.329 Y17.501 E.00644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.422 Y17.103 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.342 Y17.072 E.00286 G3 X16.536 Y16.503 I.859 J-2.071 E.03299 G3 X18.021 Y12.765 I1.661 J-1.504 E.16556 G3 X17.62 Y17.166 I.18 J2.235 E.25917 G1 X17.46 Y17.115 E.00555 G1 X17.562 Y16.691 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.506 Y16.674 E.00178 G3 X17.295 Y13.432 I.685 J-1.673 E.12406 G3 X18.049 Y13.199 I.917 J1.636 E.02444 G3 X17.731 Y16.75 I.143 J1.802 E.19321 G1 X17.6 Y16.704 E.00427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.506 Y16.674 G1 X17.295 Y16.568 G1 X17.098 Y16.436 G1 X16.92 Y16.28 G1 X16.764 Y16.102 G1 X16.632 Y15.905 G1 X16.527 Y15.693 G1 X16.451 Y15.469 G1 X16.405 Y15.236 G1 X16.405 Y15.229 ;WIPE_END G1 X15.745 Y7.625 Z12 F30000 G1 X14.502 Y-6.698 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X19.967 Y-5.921 Z12 F30000 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.436469 G1 F15000 G1 X20.346 Y-5.673 E.01449 G1 X20.771 Y-5.249 E.01926 G1 X20.771 Y-5.921 E.02155 G1 X20.007 Y-5.921 E.02447 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.329 Y-4.945 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.534633 G1 F15000 G1 X15.48 Y-5.168 E.01083 G3 X16.259 Y-5.871 I2.61 J2.108 E.04222 G1 X15.329 Y-5.871 E.03728 G1 X15.329 Y-4.985 E.03554 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.894 Y-1.368 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419741 G1 F15000 G1 X14.894 Y1.991 E.10313 G1 X17.076 Y-.192 E.09476 G1 X16.656 Y-.375 E.01408 G1 X16.064 Y-.829 E.02291 G1 X15.575 Y-1.456 E.02441 G1 X15.268 Y-2.189 E.02441 ;WIDTH:0.40108 G1 X15.226 Y-2.584 E.01159 ;WIDTH:0.382908 G1 X15.183 Y-2.979 E.011 G1 X15.257 Y-3.764 E.02183 ;WIDTH:0.418467 G1 X15.451 Y-4.3 E.01744 G1 X15.771 Y-4.837 E.01913 G1 X16.158 Y-5.252 E.01738 G1 X16.659 Y-5.627 E.01913 G1 X17.389 Y-5.932 E.02423 ;WIDTH:0.401081 G1 X17.784 Y-5.974 E.01159 ;WIDTH:0.382908 G1 X18.179 Y-6.017 E.01101 G1 X18.964 Y-5.943 E.02183 ;WIDTH:0.419345 G1 X19.5 Y-5.749 E.01749 G1 X20.037 Y-5.429 E.01918 G1 X20.601 Y-4.873 E.02429 G1 X20.833 Y-4.506 E.01332 G1 X21.156 Y-4.56 E.01003 G1 X21.156 Y-6.306 E.05356 G3 X19.075 Y-6.309 I-.777 J-160.307 E.06382 ;WIDTH:0.400449 G1 X18.659 Y-6.322 E.01215 ;WIDTH:0.382848 G2 X17.412 Y-6.31 I-.525 J10.388 E.03455 ;WIDTH:0.418887 G3 X14.894 Y-6.306 I-1.681 J-242.282 E.07714 G3 X14.891 Y-3.875 I-187.308 J.952 E.07446 ;WIDTH:0.400451 G1 X14.878 Y-3.459 E.01215 ;WIDTH:0.382846 G2 X14.89 Y-2.212 I10.388 J.525 E.03455 ;WIDTH:0.411229 G1 X14.894 Y-1.408 E.02413 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.271 Y-.479 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X15.271 Y1.08 E.0479 G2 X16.426 Y-.075 I-564.411 J-565.196 E.0502 G3 X15.73 Y-.635 I5.109 J-7.073 E.02744 G1 X15.274 Y-1.225 E.02293 G1 X15.271 Y-.519 E.0217 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.765 Y-.089 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.585514 G1 F14104.581 G2 X15.779 Y.005 I-.033 J.053 E.0126 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.09 Y-1.849 F30000 ;TYPE:Gap infill ;WIDTH:0.458638 G1 F12000 G1 X21.147 Y-2.197 E.01196 ;WIDTH:0.433477 G1 X21.151 Y-2.222 E.00082 ;WIDTH:0.411699 G1 X21.169 Y-2.409 E.00565 ;WIDTH:0.372931 G2 X21.189 Y-2.617 I-3.166 J-.406 E.0056 ;WIDTH:0.341601 G2 X21.188 Y-3.404 I-8.712 J-.379 E.01916 ;WIDTH:0.374871 G1 X21.169 Y-3.591 E.00508 ;WIDTH:0.414325 G2 X21.147 Y-3.803 I-3.244 J.225 E.00647 ;WIDTH:0.436844 G1 X21.09 Y-4.151 E.01133 G1 X21.522 Y9.813 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.422792 G1 F15000 G1 X19.05 Y12.284 E.1082 G2 X18.615 Y12.182 I-.606 J1.601 E.01387 G1 X21.352 Y9.445 E.11981 G1 X21.352 Y8.908 E.01663 G1 X18.113 Y12.147 E.14178 G1 X17.915 Y12.141 E.00614 G1 X17.519 Y12.204 E.01241 G1 X21.352 Y8.371 E.16779 G1 X21.352 Y7.834 E.01663 G1 X14.982 Y14.203 E.27883 G2 X14.716 Y13.98 I-1.247 J1.224 E.01077 G1 X14.716 Y13.933 E.00148 G1 X21.352 Y7.296 E.29051 G1 X21.352 Y6.759 E.01663 G1 X14.716 Y13.395 E.29051 G1 X14.716 Y12.858 E.01663 G1 X21.352 Y6.222 E.29051 G1 X21.352 Y5.685 E.01663 G1 X14.716 Y12.321 E.29051 G1 X14.716 Y11.784 E.01663 G1 X21.352 Y5.147 E.29051 G1 X21.352 Y4.61 E.01663 G1 X14.716 Y11.247 E.29051 G1 X14.716 Y10.709 E.01663 G1 X21.352 Y4.073 E.29051 G1 X21.352 Y3.536 E.01663 G1 X14.716 Y10.172 E.29051 G1 X14.716 Y9.635 E.01663 G1 X21.352 Y2.999 E.29051 G1 X21.352 Y2.461 E.01663 G1 X14.716 Y9.098 E.29051 G1 X14.716 Y8.56 E.01663 G1 X21.352 Y1.924 E.29051 G1 X21.352 Y1.387 E.01663 G1 X14.716 Y8.023 E.29051 G1 X14.716 Y7.486 E.01663 G1 X21.352 Y.85 E.29051 G1 X21.352 Y.312 E.01663 G1 X14.716 Y6.949 E.29051 G1 X14.716 Y6.412 E.01663 G1 X21.352 Y-.225 E.29051 G1 X21.352 Y-.762 E.01663 G1 X14.716 Y5.874 E.29051 G1 X14.716 Y5.337 E.01663 G1 X21.352 Y-1.299 E.29051 G1 X21.352 Y-1.607 E.00952 G1 X21.155 Y-1.639 E.00619 G1 X14.716 Y4.8 E.28188 G1 X14.716 Y4.263 E.01663 G1 X19.397 Y-.418 E.20492 G3 X18.625 Y-.184 I-1.259 J-2.76 E.02503 G1 X14.716 Y3.725 E.17115 G1 X14.716 Y3.188 E.01663 G1 X18.062 Y-.158 E.1465 G3 X17.588 Y-.221 I.003 J-1.832 E.01485 G1 X14.528 Y2.838 E.13394 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.535 Y12.281 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X20.034 Y12.569 E.0177 G1 X20.601 Y13.127 E.02443 G1 X20.833 Y13.494 E.01334 G1 X21.156 Y13.44 E.01005 G1 X21.156 Y10.66 E.08542 G1 X19.564 Y12.253 E.06919 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.198 Y12.194 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.480066 G1 F15000 G1 X20.749 Y12.699 E.02661 G1 X20.749 Y11.643 E.03759 G1 X20.227 Y12.165 E.0263 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.09 Y13.849 F30000 ;TYPE:Gap infill ;WIDTH:0.436839 G1 F12000 G1 X21.147 Y14.197 E.01133 ;WIDTH:0.414321 G3 X21.169 Y14.409 I-3.217 J.437 E.00647 ;WIDTH:0.374869 G1 X21.188 Y14.596 E.00508 ;WIDTH:0.341601 G3 X21.189 Y15.383 I-8.711 J.408 E.01916 ;WIDTH:0.37293 G3 X21.169 Y15.591 I-3.184 J-.199 E.0056 ;WIDTH:0.411696 G1 X21.151 Y15.778 E.00564 ;WIDTH:0.433475 G1 X21.147 Y15.803 E.00082 ;WIDTH:0.458637 G1 X21.09 Y16.151 E.01196 G1 X19.987 Y17.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.432893 G1 F15000 G1 X20.772 Y17.922 E.02496 G1 X20.772 Y17.25 E.02136 G3 X20.019 Y17.899 I-2.432 J-2.065 E.03171 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.326 Y16.928 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.528852 G1 F15000 G1 X15.326 Y17.874 E.03748 G1 X16.272 Y17.874 E.03748 G1 X15.801 Y17.513 E.0235 G1 X15.351 Y16.959 E.02828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.871 Y14.552 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41082 G1 F15000 G3 X14.894 Y18.306 I-335.048 J3.966 E.11253 G3 X17.314 Y18.309 I.837 J273.525 E.07255 ;WIDTH:0.400627 G1 X17.736 Y18.322 E.01231 ;WIDTH:0.382838 G2 X18.988 Y18.31 I.528 J-10.472 E.03469 ;WIDTH:0.419081 G3 X21.156 Y18.306 I1.506 J208.724 E.06645 G1 X21.156 Y16.56 E.05352 G1 X20.833 Y16.506 E.01002 G1 X20.605 Y16.87 E.01316 G1 X20.242 Y17.252 E.01616 G1 X19.741 Y17.627 E.01916 G1 X19.011 Y17.932 E.02427 ;WIDTH:0.401084 G1 X18.616 Y17.974 E.01159 ;WIDTH:0.382913 G1 X18.221 Y18.017 E.011 G1 X17.436 Y17.943 E.02183 ;WIDTH:0.405848 G1 X16.699 Y17.65 E.02348 G1 X16.064 Y17.171 E.02351 G1 X15.575 Y16.544 E.02351 G1 X15.338 Y16.025 E.01689 G1 X15.203 Y15.414 E.0185 G1 X15.201 Y14.752 E.01956 G1 X15.254 Y14.396 E.01066 G1 X15.082 Y14.563 E.00709 G3 X14.909 Y14.562 I-.086 J-.124 E.00544 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X15.014 Y14.589 G1 X15.082 Y14.563 G1 X15.254 Y14.396 G1 X15.201 Y14.752 G1 X15.203 Y15.414 G1 X15.323 Y15.959 ;WIPE_END G1 X16.321 Y8.392 Z12 F30000 G1 X18.752 Y-10.052 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z12 F30000 G1 X30.752 Y-52.052 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:11.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.2 I-1.134 J.442 P1 F30000 G1 X50 Y-1.735 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.246 Y-1.719 I.004 J1.738 E.0082 G1 X50.34 Y-1.709 E.00312 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.735 I-.663 J-1.607 E.20225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.286 Y-2.124 I.001 J2.147 E.00953 G1 X50.42 Y-2.111 E.00445 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.984 E.25038 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.329 Y-2.557 E.01016 G1 X50.505 Y-2.539 E.00544 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.329 Y-2.557 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.539 Y.806 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F15000 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X44.165 Y-4.313 Z12.2 F30000 G1 X-51.352 Y-52.052 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-50.186 Y-43.942 Z12.2 F30000 G1 X-39.352 Y-10.052 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-37.988 Y-2.008 Z12.2 F30000 G1 X-37.456 Y-.487 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.71 Y-.368 E.0093 G3 X-40.818 Y-5.018 I-1.098 J-2.63 E.26036 G3 X-39.061 Y-5.837 I2.001 J1.998 E.06565 G3 X-37.376 Y-.534 I.253 J2.839 E.25568 G1 X-37.422 Y-.507 E.00175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.636 Y-.852 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.866 Y-.744 E.00841 G3 X-39.034 Y-5.431 I-.934 J-2.256 E.27847 G3 X-36.512 Y-3.855 I.231 J2.436 E.10602 G3 X-37.579 Y-.886 I-2.287 J.855 E.11381 G1 X-37.602 Y-.872 E.00086 G1 X-37.829 Y-1.242 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.031 Y-1.144 E.00692 G3 X-39.805 Y-4.741 I-.775 J-1.854 E.18629 G3 X-39.006 Y-4.997 I.984 J1.699 E.026 G3 X-37.794 Y-1.262 I.199 J1.999 E.16746 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.031 Y-1.144 G1 X-38.28 Y-1.058 G1 X-38.538 Y-1.007 G1 X-38.8 Y-.99 G1 X-39.062 Y-1.007 G1 X-39.32 Y-1.058 G1 X-39.62 Y-1.168 G1 X-39.711 Y-1.212 ;WIPE_END G1 X-40.315 Y6.396 Z12.2 F30000 G1 X-41.128 Y16.643 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-41.267 Y16.425 E.00859 G3 X-41.473 Y15.986 I2.467 J-1.425 E.01608 G3 X-39.061 Y12.163 I2.675 J-.985 E.17317 G3 X-41.06 Y16.734 I.26 J2.837 E.3921 G1 X-41.104 Y16.675 E.00245 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.789 Y16.416 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.922 Y16.225 E.00772 G3 X-40.289 Y13.059 I2.114 J-1.224 E.11699 G3 X-39.034 Y12.569 I1.511 J2.016 E.04525 G3 X-40.743 Y16.491 I.227 J2.432 E.33621 G1 X-40.768 Y16.45 E.00159 G1 X-40.428 Y16.175 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.545 Y16.008 E.00628 G3 X-39.805 Y13.259 I1.738 J-1.006 E.09721 G3 X-39.006 Y13.003 I.984 J1.699 E.026 G3 X-40.398 Y16.227 I.199 J1.999 E.25646 G1 X-40.408 Y16.21 E.0006 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.545 Y16.008 G1 X-40.657 Y15.769 G1 X-40.742 Y15.52 G1 X-40.793 Y15.262 G1 X-40.81 Y15 G1 X-40.793 Y14.738 G1 X-40.742 Y14.48 G1 X-40.685 Y14.311 ;WIPE_END G1 X-38.725 Y6.935 Z12.2 F30000 G1 X-35.102 Y-6.698 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 M73 P76 R18 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-35.494 Y-4.253 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-35.494 Y-6.306 E.06307 G1 X-37.547 Y-6.306 E.06307 G1 X-37.578 Y-5.993 E.00967 G3 X-35.807 Y-4.222 I-1.091 J2.861 E.07924 G1 X-35.534 Y-4.249 E.00844 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.889 Y-5.186 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.446009 G1 F15000 G2 X-35.884 Y-5.916 I-42.426 J-.629 E.02398 G2 X-36.614 Y-5.911 I-.326 J6.262 E.02399 G3 X-35.915 Y-5.216 I-2.356 J3.068 E.03248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.579 Y-3.851 F30000 ;TYPE:Gap infill ;WIDTH:0.509639 G1 F12000 G1 X-35.539 Y-3.445 E.01553 ;WIDTH:0.492656 G3 X-35.537 Y-2.586 I-9.422 J.451 E.03149 ;WIDTH:0.523985 G3 X-35.579 Y-2.149 I-6.71 J-.425 E.0172 G1 X-35.494 Y1.523 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-35.494 Y-1.747 E.10047 G1 X-35.805 Y-1.777 E.0096 G1 X-36.211 Y-1.042 E.02581 G3 X-36.842 Y-.412 I-3.043 J-2.412 E.02746 G1 X-37.21 Y-.193 E.01316 G1 X-35.522 Y1.495 E.07333 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.925 Y.482 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.527852 G1 F15000 G1 X-35.925 Y-.71 E.04712 G3 X-36.522 Y-.115 I-3.505 J-2.917 E.03337 G1 X-35.953 Y.454 E.03178 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y2.371 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4229 G1 F15000 G1 X-37.668 Y-.169 E.11122 G3 X-38.077 Y-.04 I-.695 J-1.486 E.01329 G1 X-35.316 Y2.721 E.1209 G1 X-35.316 Y3.258 E.01664 G1 X-38.54 Y.034 E.1412 G3 X-39.079 Y.033 I-.265 J-2.046 E.01673 G1 X-35.316 Y3.796 E.16479 G1 X-35.316 Y4.333 E.01664 G1 X-39.76 Y-.111 E.19459 G3 X-41.342 Y-1.325 I.879 J-2.784 E.06302 G1 X-41.483 Y-1.297 E.00445 G1 X-35.316 Y4.87 E.27005 G1 X-35.316 Y5.408 E.01664 G1 X-41.931 Y-1.207 E.28968 G1 X-41.952 Y-1.203 E.00066 G1 X-41.952 Y-.691 E.01586 G1 X-35.316 Y5.945 E.2906 G1 X-35.316 Y6.483 E.01664 G1 X-41.952 Y-.154 E.2906 G1 X-41.952 Y.384 E.01664 G1 X-35.316 Y7.02 E.2906 G1 X-35.316 Y7.557 E.01664 G1 X-41.952 Y.921 E.2906 G1 X-41.952 Y1.458 E.01664 G1 X-35.316 Y8.095 E.2906 G1 X-35.316 Y8.632 E.01664 G1 X-41.952 Y1.996 E.2906 G1 X-41.952 Y2.533 E.01664 G1 X-35.316 Y9.169 E.2906 G1 X-35.316 Y9.707 E.01664 G1 X-41.952 Y3.071 E.2906 G1 X-41.952 Y3.608 E.01664 G1 X-35.316 Y10.244 E.2906 G1 X-35.316 Y10.782 E.01664 G1 X-41.952 Y4.145 E.2906 G1 X-41.952 Y4.683 E.01664 G1 X-35.316 Y11.319 E.2906 G1 X-35.316 Y11.856 E.01664 G1 X-41.952 Y5.22 E.2906 G1 X-41.952 Y5.757 E.01664 G1 X-35.316 Y12.394 E.2906 G1 X-35.316 Y12.931 E.01664 G1 X-41.952 Y6.295 E.2906 G1 X-41.952 Y6.832 E.01664 G1 X-35.316 Y13.468 E.2906 G1 X-35.316 Y13.54 E.0022 G1 X-35.493 Y13.812 E.01006 G1 X-41.952 Y7.369 E.28248 G1 X-41.952 Y7.907 E.01664 G1 X-37.7 Y12.158 E.18617 G2 X-38.422 Y11.974 I-1.345 J3.758 E.0231 G1 X-41.952 Y8.444 E.15456 G1 X-41.952 Y8.982 E.01664 G1 X-38.813 Y12.12 E.13743 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.566 Y11.85 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-41.756 Y9.66 E.09518 G1 X-41.756 Y13.042 E.10395 G1 X-41.432 Y13.107 E.01014 G1 X-41.014 Y12.633 E.01942 G1 X-40.478 Y12.227 E.02066 G3 X-39.604 Y11.862 I1.48 J2.312 E.02925 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.261 Y11.687 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-41.379 Y10.57 E.04856 G1 X-41.379 Y12.471 E.05843 G1 X-40.704 Y11.926 E.02667 G1 X-40.297 Y11.706 E.01422 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.928 Y11.538 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.509332 G1 F15000 G2 X-40.919 Y11.623 I-.028 J.046 E.0091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.716 Y13.45 F30000 ;TYPE:Gap infill ;WIDTH:0.374794 G1 F12000 G1 X-41.781 Y13.777 E.00901 ;WIDTH:0.348458 G1 X-41.803 Y13.91 E.00336 ;WIDTH:0.304428 G1 X-41.825 Y14.044 E.00288 ;WIDTH:0.258351 G1 X-41.848 Y14.19 E.0026 ;WIDTH:0.215341 G1 X-41.868 Y14.39 E.00282 ;WIDTH:0.175224 G1 X-41.888 Y14.597 E.00225 ;WIDTH:0.142208 G1 X-41.901 Y15.003 E.00328 G1 X-41.888 Y15.41 E.0033 ;WIDTH:0.17594 G1 X-41.868 Y15.61 E.00218 ;WIDTH:0.21662 G1 X-41.847 Y15.823 E.00303 ;WIDTH:0.260399 G1 X-41.825 Y15.956 E.0024 ;WIDTH:0.304431 G1 X-41.803 Y16.09 E.00288 ;WIDTH:0.348463 G1 X-41.781 Y16.223 E.00337 ;WIDTH:0.37048 G1 X-41.716 Y16.55 E.00889 G1 X-40.022 Y17.993 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-40.434 Y17.805 E.01389 G1 X-40.919 Y17.445 E.01859 G3 X-41.422 Y16.891 I2.757 J-3.011 E.02301 G1 X-41.756 Y16.958 E.01045 G1 X-41.756 Y18.306 E.04143 G1 X-40.053 Y18.306 E.05231 G1 X-40.026 Y18.032 E.00844 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.815 Y17.963 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.351736 G1 F15000 G1 X-41.401 Y17.465 E.01934 G1 X-41.413 Y17.963 E.01254 G1 X-40.855 Y17.963 E.01403 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.651 Y18.221 F30000 ;TYPE:Gap infill ;WIDTH:0.50964 G1 F12000 G1 X-39.245 Y18.261 E.01553 ;WIDTH:0.492656 G2 X-38.386 Y18.263 I.451 J-9.423 E.03149 ;WIDTH:0.523986 G2 X-37.949 Y18.221 I-.424 J-6.699 E.0172 G1 X-35.494 Y16.253 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-35.807 Y16.222 E.00967 G3 X-37.578 Y17.993 I-2.861 J-1.091 E.07925 G1 X-37.547 Y18.306 E.00967 G1 X-35.494 Y18.306 E.06307 G1 X-35.494 Y16.293 E.06184 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.889 Y17.186 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44601 G1 F15000 G3 X-36.614 Y17.911 I-3.185 J-2.46 E.03379 G2 X-35.884 Y17.916 I.629 J-42.389 E.02398 G2 X-35.886 Y17.226 I-5.912 J-.326 E.02268 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.579 Y15.851 F30000 ;TYPE:Gap infill ;WIDTH:0.523984 G1 F12000 G2 X-35.537 Y15.414 I-6.66 J-.861 E.0172 ;WIDTH:0.492656 G2 X-35.539 Y14.555 I-9.423 J-.408 E.03149 ;WIDTH:0.509639 G1 X-35.579 Y14.149 E.01553 G1 X-35.832 Y13.82 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-35.896 Y13.857 E.00204 G1 X-35.831 Y13.892 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.716 Y-1.45 F30000 ;TYPE:Gap infill ;WIDTH:0.370483 G1 F12000 G1 X-41.781 Y-1.777 E.00889 ;WIDTH:0.348466 G1 X-41.803 Y-1.91 E.00337 ;WIDTH:0.304434 G1 X-41.825 Y-2.044 E.00288 ;WIDTH:0.260402 G1 X-41.847 Y-2.177 E.0024 ;WIDTH:0.216621 G1 X-41.868 Y-2.39 E.00303 ;WIDTH:0.17594 G1 X-41.888 Y-2.59 E.00218 ;WIDTH:0.142207 G1 X-41.901 Y-2.997 E.0033 G1 X-41.888 Y-3.403 E.00328 ;WIDTH:0.175224 G1 X-41.868 Y-3.61 E.00225 ;WIDTH:0.215344 G1 X-41.848 Y-3.81 E.00282 ;WIDTH:0.258355 G1 X-41.825 Y-3.956 E.0026 ;WIDTH:0.304433 G1 X-41.803 Y-4.09 E.00288 ;WIDTH:0.348464 G1 X-41.781 Y-4.223 E.00336 ;WIDTH:0.374802 G1 X-41.716 Y-4.55 E.00901 G1 X-40.022 Y-5.993 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-40.053 Y-6.306 E.00967 G1 X-41.756 Y-6.306 E.05231 G1 X-41.756 Y-4.958 E.04143 G1 X-41.421 Y-4.891 E.01049 G1 X-41.087 Y-5.304 E.01633 G3 X-40.059 Y-5.976 I2.246 J2.314 E.03797 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.812 Y-5.964 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.349607 G1 F15000 G1 X-41.414 Y-5.964 E.01505 G1 X-41.414 Y-5.447 E.01291 G1 X-41.012 Y-5.825 E.01379 G1 X-40.845 Y-5.941 E.00508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.651 Y-6.221 F30000 ;TYPE:Gap infill ;WIDTH:0.509633 G1 F12000 G1 X-39.245 Y-6.261 E.01553 ;WIDTH:0.49265 G3 X-38.386 Y-6.263 I.451 J9.422 E.03149 ;WIDTH:0.523981 G3 X-37.949 Y-6.221 I-.425 J6.709 E.0172 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.386 Y-6.263 ;WIPE_END G1 X-35.638 Y.858 Z12.2 F30000 G1 X-15.232 Y53.745 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28685 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z12.2 F30000 G1 X-5.6 Y52.94 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42871 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290584 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-2.315 Y44.89 Z12.2 F30000 G1 X-2.945 Y22.045 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X1.951 Y17.278 Z12.2 F30000 G1 X18.688 Y-.193 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.572 Y-.173 E.0039 G3 X16.266 Y-5.092 I-.372 J-2.826 E.23886 G3 X17.939 Y-5.837 I1.892 J1.997 E.06194 G3 X18.938 Y-.246 I.261 J2.838 E.28095 G1 X18.727 Y-.201 E.00715 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.609 Y-.592 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.519 Y-.577 E.00301 G3 X16.711 Y-4.941 I-.326 J-2.421 E.21266 G3 X17.966 Y-5.431 I1.511 J2.016 E.04525 G3 X18.832 Y-.64 I.227 J2.433 E.24068 G1 X18.648 Y-.601 E.00627 G1 X18.524 Y-1.019 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.462 Y-1.01 E.00191 G3 X17.195 Y-4.741 I-.269 J-1.99 E.17 G3 X17.994 Y-4.997 I.984 J1.699 E.026 G3 X18.719 Y-1.062 I.199 J1.998 E.18355 G1 X18.563 Y-1.027 E.00493 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.462 Y-1.01 G1 X18.2 Y-.99 G1 X17.938 Y-1.007 G1 X17.68 Y-1.058 G1 X17.431 Y-1.143 G1 X17.195 Y-1.259 G1 X16.976 Y-1.405 G1 X16.778 Y-1.578 G1 X16.741 Y-1.621 ;WIPE_END G1 X16.926 Y6.009 Z12.2 F30000 G1 X17.209 Y17.671 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.11 Y17.632 E.00353 G3 X16.266 Y12.908 I1.09 J-2.632 E.18926 G3 X17.939 Y12.163 I1.892 J1.997 E.06194 G3 X17.463 Y17.751 I.26 J2.837 E.33025 G1 X17.247 Y17.683 E.00751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.34 Y17.286 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.263 Y17.262 E.00266 G3 X16.711 Y13.059 I.93 J-2.26 E.17022 G3 X17.966 Y12.569 I1.511 J2.016 E.04525 G3 X17.566 Y17.365 I.227 J2.433 E.28326 G1 X17.377 Y17.299 E.00664 G1 X17.479 Y16.874 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.43 Y16.858 E.00158 G3 X17.195 Y13.259 I.763 J-1.857 E.13767 G3 X17.994 Y13.003 I.984 J1.699 E.026 G3 X17.68 Y16.942 I.199 J1.998 E.21586 G1 X17.517 Y16.887 E.00527 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.43 Y16.858 G1 X17.195 Y16.741 G1 X16.976 Y16.595 G1 X16.741 Y16.379 G1 X16.605 Y16.224 G1 X16.459 Y16.005 G1 X16.343 Y15.769 G1 X16.258 Y15.52 G1 X16.245 Y15.454 ;WIPE_END G1 X15.646 Y7.845 Z12.2 F30000 G1 X14.502 Y-6.698 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X14.894 Y-4.253 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X15.207 Y-4.222 E.00967 G3 X16.978 Y-5.993 I2.861 J1.091 E.07924 G1 X16.947 Y-6.306 E.00967 G1 X14.894 Y-6.306 E.06307 G1 X14.894 Y-4.293 E.06184 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.289 Y-5.186 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.446007 G1 F15000 G3 X16.014 Y-5.911 I3.186 J2.46 E.03379 G2 X15.284 Y-5.916 I-.629 J42.387 E.02398 G2 X15.286 Y-5.226 I5.917 J.326 E.02268 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.979 Y-3.851 F30000 ;TYPE:Gap infill ;WIDTH:0.523979 G1 F12000 G2 X14.937 Y-3.414 I6.661 J.861 E.0172 ;WIDTH:0.492648 G2 X14.939 Y-2.555 I9.423 J.408 E.03149 ;WIDTH:0.509633 G1 X14.979 Y-2.149 E.01553 G1 X15.199 Y-1.764 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.429633 G1 F15000 G1 X15.452 Y-1.428 E.01325 ;WIDTH:0.395895 G2 X16.118 Y-.673 I3.118 J-2.081 E.02904 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.918 Y-.212 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4229 G1 F15000 G1 X21.352 Y2.222 E.10658 G1 X21.352 Y2.759 E.01664 G1 X18.614 Y.022 E.11988 G1 X18.598 Y.025 E.0005 G3 X18.099 Y.044 I-.323 J-1.884 E.0155 G1 X21.352 Y3.297 E.14242 G1 X21.352 Y3.834 E.01664 G1 X17.478 Y-.04 E.16962 G3 X16.518 Y-.463 I.503 J-2.443 E.03274 G1 X21.352 Y4.371 E.21168 G1 X21.352 Y4.909 E.01664 G1 X14.718 Y-1.725 E.29049 G2 X14.716 Y-1.19 I46.717 J.473 E.01657 G1 X21.352 Y5.446 E.2906 G1 X21.352 Y5.983 E.01664 G1 X14.716 Y-.653 E.2906 G1 X14.716 Y-.115 E.01664 G1 X21.352 Y6.521 E.2906 G1 X21.352 Y7.058 E.01664 G1 X14.716 Y.422 E.2906 G1 X14.716 Y.959 E.01664 G1 X21.352 Y7.596 E.2906 G1 X21.352 Y8.133 E.01664 G1 X14.716 Y1.497 E.2906 G1 X14.716 Y2.034 E.01664 G1 X21.352 Y8.67 E.2906 G1 X21.352 Y9.208 E.01664 G1 X14.716 Y2.571 E.2906 G1 X14.716 Y3.109 E.01664 G1 X21.352 Y9.745 E.2906 G1 X21.352 Y10.282 E.01664 G1 X14.716 Y3.646 E.2906 G1 X14.716 Y4.184 E.01664 G1 X21.352 Y10.82 E.2906 G1 X21.352 Y11.357 E.01664 G1 X14.716 Y4.721 E.2906 G1 X14.716 Y5.258 E.01664 G1 X21.352 Y11.895 E.2906 G1 X21.352 Y12.432 E.01664 G1 X14.716 Y5.796 E.2906 G1 X14.716 Y6.333 E.01664 G1 X21.352 Y12.969 E.2906 G1 X21.352 Y13.203 E.00724 G1 X21.099 Y13.254 E.00799 G1 X14.716 Y6.87 E.27952 G1 X14.716 Y7.408 E.01664 G1 X19.608 Y12.3 E.21422 G2 X18.782 Y12.012 I-1.417 J2.735 E.02716 G1 X14.716 Y7.945 E.17808 G1 X14.716 Y8.483 E.01664 G1 X18.183 Y11.95 E.15185 G2 X17.7 Y12.004 I.025 J2.419 E.01509 G1 X14.528 Y8.833 E.13887 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.784 Y11.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.61883 G1 F13288.642 G2 X15.8 Y11.776 I-.036 J.056 E.01431 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.271 Y10.591 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X15.271 Y12.872 E.0701 G1 X15.71 Y12.376 E.02036 G1 X16.331 Y11.899 E.02407 G1 X16.49 Y11.81 E.0056 G1 X15.3 Y10.619 E.05174 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.894 Y9.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X14.894 Y13.747 E.12495 G1 X15.207 Y13.778 E.00967 G3 X15.986 Y12.633 I2.918 J1.148 E.04289 G1 X16.558 Y12.201 E.02202 G1 X16.975 Y11.994 E.0143 G1 X17.153 Y11.94 E.00574 G1 X14.922 Y9.709 E.09695 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.979 Y14.149 F30000 ;TYPE:Gap infill ;WIDTH:0.52398 G1 F12000 G2 X14.937 Y14.586 I6.661 J.861 E.0172 ;WIDTH:0.492648 G2 X14.939 Y15.445 I9.423 J.408 E.03149 ;WIDTH:0.509633 G1 X14.979 Y15.851 E.01553 G1 X14.894 Y16.253 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X14.894 Y18.306 E.06307 G1 X16.947 Y18.306 E.06307 G1 X16.978 Y17.993 E.00967 G3 X15.207 Y16.222 I1.091 J-2.861 E.07924 G1 X14.934 Y16.249 E.00844 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.289 Y17.186 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.446008 G1 F15000 G2 X15.284 Y17.916 I42.387 J.629 E.02398 G2 X16.014 Y17.911 I.326 J-6.242 E.02399 G3 X15.315 Y17.216 I2.357 J-3.068 E.03247 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.349 Y18.221 F30000 ;TYPE:Gap infill ;WIDTH:0.50964 G1 F12000 G1 X17.755 Y18.261 E.01553 ;WIDTH:0.492656 G2 X18.614 Y18.263 I.451 J-9.423 E.03149 ;WIDTH:0.523986 G2 X19.051 Y18.221 I-.424 J-6.699 E.0172 G1 X19.422 Y17.993 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X19.453 Y18.306 E.00967 G1 X21.156 Y18.306 E.05231 G1 X21.156 Y16.958 E.04143 G1 X20.832 Y16.893 E.01014 G1 X20.414 Y17.367 E.01942 G1 X19.84 Y17.801 E.02212 G1 X19.459 Y17.976 E.01288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.195 Y17.963 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.351582 G1 F15000 G1 X20.813 Y17.963 E.01553 G1 X20.813 Y17.442 E.01311 G3 X20.227 Y17.939 I-2.121 J-1.904 E.01938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.116 Y16.55 F30000 ;TYPE:Gap infill ;WIDTH:0.374813 G1 F12000 G1 X21.181 Y16.223 E.00901 ;WIDTH:0.348473 G1 X21.203 Y16.09 E.00337 ;WIDTH:0.30444 G1 X21.225 Y15.956 E.00288 ;WIDTH:0.25836 G1 X21.248 Y15.81 E.0026 ;WIDTH:0.215349 G1 X21.268 Y15.61 E.00282 ;WIDTH:0.175229 G1 X21.288 Y15.403 E.00225 ;WIDTH:0.142214 G1 X21.301 Y14.997 E.00328 G1 X21.288 Y14.59 E.0033 ;WIDTH:0.175948 G1 X21.268 Y14.39 E.00218 ;WIDTH:0.216629 G1 X21.247 Y14.177 E.00303 ;WIDTH:0.260406 G1 X21.225 Y14.044 E.0024 ;WIDTH:0.304437 G1 X21.203 Y13.91 E.00288 ;WIDTH:0.348467 G1 X21.181 Y13.777 E.00337 ;WIDTH:0.370484 G1 X21.116 Y13.45 E.00889 G1 X19.548 Y-.064 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X21.156 Y1.544 E.06985 G1 X21.156 Y-1.042 E.07947 G1 X20.821 Y-1.109 E.01049 G1 X20.487 Y-.696 E.01633 G3 X19.585 Y-.08 I-2.209 J-2.267 E.03372 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.212 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.466571 G1 F15000 G1 X20.755 Y.577 E.02652 G2 X20.753 Y-.393 I-69.483 J-.285 E.03348 G1 X20.244 Y.009 E.02239 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.116 Y-1.45 F30000 ;TYPE:Gap infill ;WIDTH:0.374807 G1 F12000 G1 X21.181 Y-1.777 E.00901 ;WIDTH:0.348469 G1 X21.203 Y-1.91 E.00336 ;WIDTH:0.304439 G1 X21.225 Y-2.044 E.00288 ;WIDTH:0.258361 G1 X21.248 Y-2.19 E.0026 ;WIDTH:0.21535 G1 X21.268 Y-2.39 E.00282 ;WIDTH:0.17523 G1 X21.288 Y-2.597 E.00225 ;WIDTH:0.142214 G1 X21.301 Y-3.003 E.00328 G1 X21.288 Y-3.41 E.0033 ;WIDTH:0.175948 G1 X21.268 Y-3.61 E.00218 ;WIDTH:0.21663 G1 X21.247 Y-3.823 E.00303 ;WIDTH:0.26041 G1 X21.225 Y-3.956 E.0024 ;WIDTH:0.304443 G1 X21.203 Y-4.09 E.00288 ;WIDTH:0.348476 G1 X21.181 Y-4.223 E.00337 ;WIDTH:0.370492 G1 X21.116 Y-4.55 E.00889 G1 X19.422 Y-5.993 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X19.834 Y-5.805 E.01389 G1 X20.334 Y-5.438 E.01906 G3 X20.821 Y-4.891 I-3.912 J3.97 E.02253 G1 X21.156 Y-4.958 E.01049 G1 X21.156 Y-6.306 E.04143 G1 X19.453 Y-6.306 E.05231 G1 X19.426 Y-6.032 E.00844 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.212 Y-5.964 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.349609 G1 F15000 G1 X20.712 Y-5.561 E.01605 G1 X20.814 Y-5.447 E.00382 G1 X20.814 Y-5.964 E.01291 G1 X20.252 Y-5.964 E.01405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.051 Y-6.221 F30000 ;TYPE:Gap infill ;WIDTH:0.523981 G1 F12000 G2 X18.614 Y-6.263 I-.862 J6.666 E.0172 ;WIDTH:0.49265 G2 X17.755 Y-6.261 I-.408 J9.424 E.03149 ;WIDTH:0.509633 G1 X17.349 Y-6.221 E.01553 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.755 Y-6.261 ;WIPE_END G1 X18.752 Y-10.052 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X20.231 Y-18.493 Z12.2 F30000 G1 X30.752 Y-52.052 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 ;LAYER_CHANGE ;Z:12 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END ;AFTER_LAYER_CHANGE ;12 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.4 I-1.134 J.442 P1 F30000 G1 X50 Y-1.743 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.243 Y-1.719 E.0081 G1 X50.34 Y-1.709 E.00323 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.283 Y-2.124 I.001 J2.147 E.00942 G1 X50.42 Y-2.111 E.00456 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 M73 P77 R18 G3 X49.96 Y-2.142 I-.822 J-1.984 E.25037 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.326 Y-2.557 E.01005 G1 X50.505 Y-2.539 E.00554 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.326 Y-2.557 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.127 Y.154 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.44258 G1 F15000 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X46.374 Y-6.529 Z12.4 F30000 G1 X30.752 Y-52.052 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z12.4 F30000 G1 X18.752 Y-10.052 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X18.474 Y-3.596 Z12.4 F30000 G1 X18.723 Y.004 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.598 Y.025 E.00418 G3 X17.031 Y-5.822 I-.403 J-3.025 E.29183 G3 X17.819 Y-6.029 I1.143 J2.74 E.02712 G3 X18.989 Y-.054 I.376 J3.029 E.30393 G1 X18.762 Y-.005 E.00773 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.643 Y-.396 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.545 Y-.379 E.0033 G3 X17.187 Y-5.445 I-.349 J-2.621 E.25286 G3 X17.871 Y-5.625 I.991 J2.378 E.02353 G3 X18.884 Y-.447 I.325 J2.624 E.26327 G1 X18.682 Y-.404 E.00684 G1 X18.558 Y-.822 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X18.488 Y-.813 E.00218 G3 X17.629 Y-5.135 I-.295 J-2.188 E.20471 G1 X17.927 Y-5.193 E.00932 G3 X18.771 Y-.87 I.266 J2.192 E.20335 G1 X18.597 Y-.831 E.00546 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.488 Y-.813 G1 X18.2 Y-.79 G1 X17.911 Y-.808 G1 X17.627 Y-.865 G1 X17.341 Y-.964 G1 X17.095 Y-1.086 G1 X16.854 Y-1.246 G1 X16.738 Y-1.348 ;WIPE_END G1 X16.893 Y6.283 Z12.4 F30000 G1 X17.128 Y17.855 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X17.032 Y17.821 E.00337 G3 X17.031 Y12.178 I1.164 J-2.821 E.23882 G3 X17.819 Y11.971 I1.143 J2.74 E.02712 G3 X17.41 Y17.949 I.376 J3.029 E.35693 G1 X17.165 Y17.867 E.00855 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.258 Y17.469 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X17.187 Y17.445 E.00249 G3 X17.517 Y12.443 I1.004 J-2.446 E.21874 G1 X17.871 Y12.375 E.01196 G3 X17.515 Y17.555 I.32 J2.624 E.3088 G1 X17.296 Y17.482 E.00766 G1 X17.398 Y17.057 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.354 Y17.042 E.00143 G3 X17.629 Y12.865 I.838 J-2.043 E.16919 G1 X17.927 Y12.807 E.00932 G3 X17.628 Y17.134 I.266 J2.192 E.23886 G1 X17.436 Y17.07 E.00622 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.354 Y17.042 G1 X17.095 Y16.914 G1 X16.854 Y16.754 G1 X16.637 Y16.563 G1 X16.446 Y16.346 G1 X16.285 Y16.105 G1 X16.153 Y15.832 G1 X16.1 Y15.677 ;WIPE_END G1 X15.557 Y8.064 Z12.4 F30000 G1 X14.502 Y-6.698 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X21.548 Y-6.698 E.23372 G1 X21.548 Y18.698 E.84243 G1 X14.502 Y18.698 E.23372 G1 X14.502 Y-6.658 E.8411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.095 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X21.955 Y-7.105 E.26073 G1 X21.955 Y19.105 E.86943 G1 X14.095 Y19.105 E.26073 G1 X14.095 Y-7.065 E.86811 G1 X13.66 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X22.39 Y-7.54 E.26825 G1 X22.39 Y19.54 E.83209 G1 X13.66 Y19.54 E.26825 G1 X13.66 Y-7.5 E.83086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.66 Y-7.509 ;WIPE_END G1 X16.799 Y-6.424 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.444561 G1 F12000 G1 X14.777 Y-4.402 E.09357 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y-4.721 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.479 Y-6.672 E.09027 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.911 Y-6.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y-5.289 E.06398 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y-5.857 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.343 Y-6.672 E.03769 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.528 Y-5.857 ;WIPE_END G1 X16.855 Y-6.243 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.436789 G1 F12000 G1 X17.079 Y-6.28 E.00729 ;WIDTH:0.417422 G1 X17.304 Y-6.317 E.00694 ;WIDTH:0.373213 G3 X17.548 Y-6.341 I.47 J3.519 E.00661 ;WIDTH:0.328949 G1 X17.768 Y-6.362 E.00516 ;WIDTH:0.292917 G3 X18.634 Y-6.362 I.438 J9.554 E.01764 ;WIDTH:0.328959 G3 X18.867 Y-6.34 I-.226 J3.572 E.00545 ;WIDTH:0.373025 G1 X19.082 Y-6.319 E.00582 ;WIDTH:0.417436 G3 X19.325 Y-6.279 I-.465 J3.575 E.00754 ;WIDTH:0.45745 G1 X19.545 Y-6.242 E.00751 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.325 Y-6.279 ;WIPE_END G1 X21.02 Y-4.677 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;WIDTH:0.124719 G1 F12000 G1 X21.12 Y-4.533 E.00117 ;WIDTH:0.150674 G1 X21.192 Y-4.424 E.00115 ;WIDTH:0.184784 G1 X21.265 Y-4.316 E.00151 ;WIDTH:0.193074 G1 X21.274 Y-4.278 E.00047 ;WIDTH:0.161135 G1 X21.299 Y-4.129 E.00146 ;WIDTH:0.117859 G1 X21.322 Y-3.989 E.00087 G1 X21.087 Y-4.736 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.420785 G1 F12000 G1 X21.522 Y-5.17 E.01892 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y-5.705 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.663 Y-4.847 E.03737 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.417 Y-5.135 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y-6.239 E.0481 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.42 Y-6.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.138 Y-5.39 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.825 Y-5.611 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.885 Y-6.672 E.04616 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.351 Y-6.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.477 Y-5.798 E.03805 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X20.351 Y-6.672 ;WIPE_END G1 X21.322 Y-2.013 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.120022 G1 F12000 G1 X21.297 Y-1.863 E.00096 ;WIDTH:0.167671 G1 X21.269 Y-1.703 E.00165 ;WIDTH:0.197428 G1 X21.265 Y-1.684 E.00024 ;WIDTH:0.18478 G1 X21.192 Y-1.576 E.00151 ;WIDTH:0.150671 G1 X21.12 Y-1.467 E.00115 ;WIDTH:0.124718 G1 X21.02 Y-1.323 E.00117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X21.12 Y-1.467 ;WIPE_END G1 X14.957 Y-1.655 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;WIDTH:0.437502 G1 F12000 G1 X14.921 Y-1.877 E.00724 ;WIDTH:0.41849 G1 X14.884 Y-2.099 E.00689 ;WIDTH:0.374754 G3 X14.86 Y-2.336 I3.58 J-.484 E.00642 ;WIDTH:0.330411 G1 X14.839 Y-2.549 E.00502 ;WIDTH:0.293244 G3 X14.838 Y-3.434 I9.864 J-.455 E.01806 ;WIDTH:0.328959 G3 X14.86 Y-3.667 I3.573 J.226 E.00545 ;WIDTH:0.373024 G1 X14.881 Y-3.882 E.00582 ;WIDTH:0.417433 G3 X14.921 Y-4.125 I3.572 J.465 E.00754 ;WIDTH:0.457448 G1 X14.958 Y-4.345 E.00751 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.921 Y-4.125 ;WIPE_END G1 X14.937 Y3.507 Z12.4 F30000 G1 X14.957 Y13.655 Z12.4 G1 Z12 G1 E.8 F1800 ;WIDTH:0.456513 G1 F12000 G1 X14.921 Y13.877 E.00759 ;WIDTH:0.416417 G2 X14.881 Y14.123 I3.74 J.731 E.00756 ;WIDTH:0.372391 G1 X14.86 Y14.336 E.00575 ;WIDTH:0.328748 G2 X14.838 Y14.566 I3.517 J.454 E.00539 ;WIDTH:0.293244 G2 X14.839 Y15.451 I9.865 J.43 E.01806 ;WIDTH:0.33041 G1 X14.86 Y15.664 E.00502 ;WIDTH:0.374752 G2 X14.884 Y15.901 I3.609 J-.248 E.00642 ;WIDTH:0.418452 G1 X14.921 Y16.122 E.00688 ;WIDTH:0.437429 G1 X14.957 Y16.344 E.00723 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.921 Y16.122 ;WIPE_END G1 X16.906 Y17.79 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.465952 G1 F12000 G1 X16.024 Y18.672 E.043 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.426 Y18.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.522 Y17.576 E.05342 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.181 Y17.318 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.828 Y18.672 E.06598 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y18.373 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.882 Y17.019 E.06598 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.624 Y16.678 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y17.774 E.05342 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y17.176 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.412 Y16.293 E.04305 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.528 Y17.176 ;WIPE_END G1 X16.855 Y18.243 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.437501 G1 F12000 G1 X17.077 Y18.279 E.00724 ;WIDTH:0.418489 G1 X17.299 Y18.316 E.00689 ;WIDTH:0.374754 G2 X17.536 Y18.34 I.484 J-3.585 E.00642 ;WIDTH:0.330417 G1 X17.749 Y18.361 E.00502 ;WIDTH:0.293252 G2 X18.634 Y18.362 I.455 J-9.864 E.01806 ;WIDTH:0.328756 G2 X18.864 Y18.34 I-.223 J-3.538 E.00539 ;WIDTH:0.372401 G1 X19.078 Y18.319 E.00575 ;WIDTH:0.416391 G2 X19.322 Y18.279 I-.486 J-3.774 E.00755 ;WIDTH:0.45641 G1 X19.544 Y18.243 E.00757 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.322 Y18.279 ;WIPE_END G1 X20.645 Y18.672 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.474038 G1 F12000 G1 X21.522 Y17.795 E.04357 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y17.185 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.035 Y18.672 E.07386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.611 Y18.486 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y16.575 E.09492 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.192 Y16.424 F30000 ;TYPE:Gap infill ;WIDTH:0.184777 G1 F12000 G1 X21.265 Y16.316 E.00151 ;WIDTH:0.19307 G1 X21.274 Y16.278 E.00047 ;WIDTH:0.161132 G1 X21.299 Y16.129 E.00146 ;WIDTH:0.117858 G1 X21.322 Y15.989 E.00087 G1 X21.192 Y16.424 F30000 ;WIDTH:0.150666 G1 F12000 G1 X21.12 Y16.533 E.00115 ;WIDTH:0.124721 G1 X21.02 Y16.677 E.00117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X21.12 Y16.533 ;WIPE_END G1 X21.344 Y13.806 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;WIDTH:0.186539 G1 F12000 G1 X21.246 Y13.658 E.00208 ;WIDTH:0.151972 G1 X21.148 Y13.51 E.00158 ;WIDTH:0.127008 G1 X21.02 Y13.323 E.00155 G1 X21.194 Y13.405 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.423378 G1 F12000 G1 X21.522 Y13.077 E.01438 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y12.539 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.761 Y13.299 E.03335 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.529 Y12.993 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y12.001 E.04352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y11.463 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.263 Y12.721 E.05516 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.964 Y12.482 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y10.925 E.06827 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y10.387 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.63 Y12.278 E.08292 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.258 Y12.113 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y9.848 E.09927 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y9.31 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.839 Y11.993 E.11761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.364 Y11.93 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y8.772 E.13844 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y8.234 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.81 Y11.945 E.16271 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.086 Y12.132 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y7.696 E.19447 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y7.158 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.038 Y13.642 E.28427 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y13.613 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y6.62 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y6.082 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y13.075 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y12.537 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y5.544 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y5.006 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y11.999 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y11.461 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y4.468 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y3.93 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y10.923 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y10.385 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y3.392 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y2.854 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y9.847 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y9.309 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y2.316 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y1.778 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y8.771 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y8.233 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y1.24 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y.702 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y7.695 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y7.157 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y.164 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y-.374 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y6.619 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y6.081 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.522 Y-.913 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.522 Y-1.451 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y5.543 E.30661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y5.005 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.184 Y-.651 E.24798 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X18.77 Y.763 ;WIPE_END G1 X19.03 Y-.035 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y4.466 E.19738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y3.928 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.388 Y.068 E.16924 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.86 Y.058 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y3.39 E.14608 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y2.852 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.405 Y-.024 E.1261 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.005 Y-.162 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y2.314 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y1.776 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.646 Y-.341 E.09284 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.323 Y-.557 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y1.238 E.0787 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y.7 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.037 Y-.808 E.06613 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.784 Y-1.093 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y.162 E.05503 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.528 Y-.376 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.564 Y-1.412 E.04541 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.381 Y-1.766 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.528 Y-.914 E.03737 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X15.381 Y-1.766 ;WIPE_END G1 X10.726 Y4.282 Z12.4 F30000 G1 X-2.945 Y22.045 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z12.4 F30000 G1 X-15.232 Y53.745 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28685 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z12.4 F30000 G1 X-5.6 Y52.94 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.255 J1.928 E.27011 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42889 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.4287 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.48841 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290581 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01244 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z12.4 F30000 G1 X-3.671 Y51.454 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.602 E.01233 G1 X-2.226 Y52.224 E.01256 G1 X-2.473 Y51.903 E.01244 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.717 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.792 Y53.101 E.0095 G1 X-2.792 Y52.899 E.0062 G1 X-2.886 Y52.604 E.0095 G1 X-3.093 Y52.378 E.00944 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.166 Y52.948 E.00487 G1 X-3.248 Y52.752 E.00653 G1 X-3.415 Y52.624 E.00647 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.248 Y52.752 G1 X-3.166 Y52.948 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-8.036 Y46.438 Z12.4 F30000 G1 X-37.367 Y-.308 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-37.633 Y-.182 E.00974 G3 X-39.969 Y-5.822 I-1.172 J-2.818 E.31832 G3 X-39.181 Y-6.029 I1.143 J2.74 E.02712 G3 X-37.275 Y-.359 I.376 J3.029 E.27744 G1 X-37.332 Y-.328 E.00217 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.548 Y-.673 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-37.789 Y-.559 E.00886 G3 X-39.813 Y-5.445 I-1.015 J-2.442 E.2758 G3 X-39.129 Y-5.625 I.991 J2.378 E.02353 G3 X-37.479 Y-.712 I.325 J2.624 E.24033 G1 X-37.513 Y-.693 E.00128 G1 X-37.74 Y-1.063 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-37.956 Y-.963 E.00733 G3 X-39.371 Y-5.135 I-.851 J-2.037 E.22245 G1 X-39.073 Y-5.193 E.00932 G3 X-37.698 Y-1.092 I.266 J2.192 E.18562 G1 X-37.707 Y-1.086 E.00032 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-37.956 Y-.963 G1 X-38.228 Y-.865 G1 X-38.511 Y-.808 G1 X-38.8 Y-.79 G1 X-39.089 Y-.808 G1 X-39.373 Y-.865 G1 X-39.633 Y-.955 ;WIPE_END G1 X-40.346 Y6.644 Z12.4 F30000 G1 X-41.294 Y16.754 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-41.446 Y16.528 E.00904 G3 X-39.969 Y12.178 I2.642 J-1.528 E.17251 G3 X-39.181 Y11.971 I1.143 J2.74 E.02712 G3 X-41.224 Y16.86 I.376 J3.029 E.42326 G1 X-41.272 Y16.787 E.00289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.955 Y16.528 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-41.093 Y16.324 E.00816 G3 X-39.813 Y12.555 I2.289 J-1.324 E.14947 G3 X-39.129 Y12.375 I.991 J2.377 E.02353 G3 X-40.9 Y16.612 I.325 J2.624 E.36666 G1 X-40.933 Y16.561 E.002 G1 X-40.594 Y16.286 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.717 Y16.107 E.00669 G3 X-39.371 Y12.865 I1.91 J-1.108 E.1247 G1 X-39.073 Y12.807 E.00932 G3 X-40.556 Y16.347 I.266 J2.192 E.28333 G1 X-40.573 Y16.32 E.00098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.717 Y16.107 G1 X-40.842 Y15.846 G1 X-40.935 Y15.572 G1 X-40.992 Y15.288 G1 X-41.009 Y14.985 G1 X-40.992 Y14.711 G1 X-40.935 Y14.428 G1 X-40.933 Y14.421 ;WIPE_END G1 X-38.901 Y7.064 Z12.4 F30000 G1 X-35.102 Y-6.698 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-35.102 Y18.698 E.84243 G1 X-42.148 Y18.698 E.23372 G1 X-42.148 Y-6.698 E.84243 G1 X-35.142 Y-6.698 E.2324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.695 Y-7.105 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-34.695 Y19.105 E.86943 G1 X-42.555 Y19.105 E.26073 G1 X-42.555 Y-7.105 E.86943 G1 X-34.735 Y-7.105 E.2594 G1 X-34.26 Y-7.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-34.26 Y19.54 E.83209 G1 X-42.99 Y19.54 E.26825 G1 X-42.99 Y-7.54 E.83209 G1 X-34.3 Y-7.54 E.26702 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.297 Y-5.54 ;WIPE_END G1 X-37.455 Y-6.242 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.457449 G1 F12000 G1 X-37.675 Y-6.279 E.00751 ;WIDTH:0.417436 G2 X-37.918 Y-6.319 I-.708 J3.531 E.00754 ;WIDTH:0.373026 G1 X-38.133 Y-6.34 E.00582 ;WIDTH:0.328959 G2 X-38.366 Y-6.362 I-.458 J3.55 E.00545 ;WIDTH:0.292917 G2 X-39.232 Y-6.362 I-.428 J9.555 E.01764 ;WIDTH:0.32895 G1 X-39.452 Y-6.341 E.00516 ;WIDTH:0.373215 G2 X-39.696 Y-6.317 I.226 J3.544 E.00661 ;WIDTH:0.417422 G1 X-39.921 Y-6.28 E.00694 ;WIDTH:0.43679 G1 X-40.145 Y-6.243 E.00729 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-39.921 Y-6.28 ;WIPE_END G1 X-41.62 Y-4.677 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;WIDTH:0.097959 G1 F12000 G1 X-41.647 Y-4.642 E.0002 ;WIDTH:0.116564 G1 X-41.72 Y-4.533 E.00078 ;WIDTH:0.150672 G1 X-41.792 Y-4.424 E.00115 ;WIDTH:0.186696 G2 X-41.871 Y-4.288 I.147 J.176 E.00189 ;WIDTH:0.166223 G1 X-41.897 Y-4.137 E.00153 ;WIDTH:0.143122 G1 X-41.922 Y-3.987 E.00124 G1 X-42.122 Y-4.569 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.475392 G1 F12000 G1 X-40.211 Y-6.48 E.09524 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.63 Y-6.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y-5.18 E.07432 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y-5.792 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.242 Y-6.672 E.04384 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-42.122 Y-5.792 ;WIPE_END G1 X-41.922 Y-2.011 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.138795 G1 F12000 G1 X-41.899 Y-1.871 E.00111 ;WIDTH:0.159733 G1 X-41.876 Y-1.731 E.00135 ;WIDTH:0.186452 G2 X-41.792 Y-1.576 I.272 J-.046 E.0021 ;WIDTH:0.150672 G1 X-41.72 Y-1.467 E.00115 ;WIDTH:0.116564 G1 X-41.647 Y-1.358 E.00078 ;WIDTH:0.0979591 G1 X-41.62 Y-1.323 E.0002 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.647 Y-1.358 ;WIPE_END G1 X-35.558 Y-1.655 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;WIDTH:0.457452 G1 F12000 G1 X-35.521 Y-1.875 E.00751 ;WIDTH:0.41744 G2 X-35.481 Y-2.118 I-3.535 J-.709 E.00754 ;WIDTH:0.373031 G1 X-35.46 Y-2.333 E.00582 ;WIDTH:0.328965 G2 X-35.438 Y-2.566 I-3.55 J-.458 E.00545 ;WIDTH:0.293251 G2 X-35.439 Y-3.451 I-9.866 J-.43 E.01806 ;WIDTH:0.330417 G1 X-35.46 Y-3.664 E.00502 ;WIDTH:0.37476 G2 X-35.484 Y-3.901 I-3.604 J.247 E.00642 ;WIDTH:0.418495 G1 X-35.521 Y-4.123 E.00689 ;WIDTH:0.437505 G1 X-35.557 Y-4.345 E.00724 G1 X-36.006 Y-4.285 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.459666 G1 F12000 G1 X-35.128 Y-5.163 E.04216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y-5.752 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.216 Y-4.665 E.05221 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.468 Y-5.003 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y-6.342 E.06431 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.388 Y-6.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.76 Y-5.3 E.06588 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.093 Y-5.556 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.977 Y-6.672 E.05356 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.567 Y-6.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.468 Y-5.771 E.04327 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-36.567 Y-6.672 ;WIPE_END G1 X-36.188 Y.951 Z12.4 F30000 G1 X-35.557 Y13.656 Z12.4 G1 Z12 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.437435 G1 F12000 G1 X-35.521 Y13.878 E.00723 ;WIDTH:0.41846 G1 X-35.484 Y14.099 E.00688 ;WIDTH:0.374761 G3 X-35.46 Y14.336 I-3.579 J.484 E.00642 ;WIDTH:0.330418 G1 X-35.439 Y14.549 E.00502 ;WIDTH:0.293251 G3 X-35.438 Y15.434 I-9.865 J.455 E.01806 ;WIDTH:0.328755 G3 X-35.46 Y15.664 I-3.537 J-.223 E.00539 ;WIDTH:0.372402 G1 X-35.481 Y15.878 E.00575 ;WIDTH:0.416427 G3 X-35.521 Y16.123 I-3.78 J-.486 E.00756 ;WIDTH:0.456518 G1 X-35.557 Y16.345 E.00759 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-35.521 Y16.123 ;WIPE_END G1 X-35.94 Y18.672 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.443432 G1 F12000 G1 X-35.128 Y17.86 E.03748 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y17.293 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.507 Y18.672 E.06362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.073 Y18.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y16.727 E.08976 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.37 Y16.402 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.398 Y18.43 E.09359 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.456 Y18.243 F30000 ;TYPE:Gap infill ;WIDTH:0.456411 G1 F12000 G1 X-37.678 Y18.279 E.00758 ;WIDTH:0.41639 G3 X-37.922 Y18.319 I-.73 J-3.734 E.00755 ;WIDTH:0.372189 G1 X-38.138 Y18.34 E.0058 ;WIDTH:0.328048 G3 X-38.371 Y18.363 I-.442 J-3.384 E.00545 ;WIDTH:0.293638 G3 X-39.251 Y18.361 I-.422 J-10.044 E.01799 ;WIDTH:0.330417 G1 X-39.464 Y18.34 E.00502 ;WIDTH:0.374755 G3 X-39.701 Y18.316 I.248 J-3.609 E.00642 ;WIDTH:0.418489 G1 X-39.923 Y18.279 E.00689 ;WIDTH:0.437502 G1 X-40.145 Y18.243 E.00724 G1 X-40.041 Y17.816 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.428682 G1 F12000 G1 X-40.897 Y18.672 E.03805 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.442 Y18.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.399 Y17.629 E.04636 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.721 Y17.405 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.988 Y18.672 E.05633 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y18.26 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.007 Y17.145 E.04954 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.26 Y16.852 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y17.714 E.03832 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y17.169 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.678 Y16.725 E.01971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.62 Y16.677 F30000 ;TYPE:Gap infill ;WIDTH:0.097952 G1 F12000 G1 X-41.647 Y16.642 E.0002 ;WIDTH:0.11655 G1 X-41.72 Y16.533 E.00078 ;WIDTH:0.15066 G1 X-41.792 Y16.424 E.00115 ;WIDTH:0.186443 G3 X-41.876 Y16.269 I.189 J-.201 E.0021 ;WIDTH:0.15973 G1 X-41.899 Y16.129 E.00135 ;WIDTH:0.138794 G1 X-41.922 Y15.989 E.00111 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.899 Y16.129 ;WIPE_END G1 X-41.922 Y14.011 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;WIDTH:0.138795 G1 F12000 G1 X-41.899 Y13.871 E.00111 ;WIDTH:0.159732 G1 X-41.876 Y13.731 E.00135 ;WIDTH:0.186446 G3 X-41.792 Y13.576 I.272 J.046 E.0021 ;WIDTH:0.150661 G1 X-41.72 Y13.467 E.00115 ;WIDTH:0.11655 G1 X-41.647 Y13.358 E.00078 ;WIDTH:0.0979502 G1 X-41.62 Y13.323 E.0002 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.647 Y13.358 ;WIPE_END G1 X-35.986 Y13.76 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.428664 G1 F12000 G1 X-35.128 Y12.903 E.03811 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y12.357 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.172 Y13.4 E.04637 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.396 Y13.079 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y11.812 E.05634 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y11.266 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.655 Y12.793 E.06785 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.948 Y12.54 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y10.721 E.08088 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y10.175 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.277 Y12.324 E.0955 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.644 Y12.146 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y9.63 E.11185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y9.084 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.058 Y12.013 E.13021 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.527 Y11.937 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y8.539 E.15107 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y7.993 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.072 Y11.937 E.17532 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.76 Y12.08 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y7.448 E.2059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y6.902 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.561 Y13.335 E.28595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y13.35 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y6.357 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y5.811 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y12.804 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y12.259 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y5.266 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y4.72 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y11.713 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y11.168 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y4.174 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y3.629 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y10.622 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y10.077 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y3.083 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y2.538 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y9.531 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y8.986 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y1.992 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y1.447 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y8.44 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y7.894 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y.901 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y.356 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y7.349 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y6.803 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y-.19 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.128 Y-.735 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y6.258 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y5.712 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.128 Y-1.281 E.31087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.359 Y-1.595 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y5.167 E.3006 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y4.621 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.984 Y-.516 E.22837 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.398 Y.898 ;WIPE_END G1 X-38.026 Y-.02 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y4.076 E.18205 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y3.53 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.663 Y.072 E.15374 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.192 Y.055 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y2.985 E.13023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y2.439 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.643 Y-.039 E.11019 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.043 Y-.185 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y1.894 E.09241 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y1.348 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.401 Y-.372 E.07649 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.722 Y-.597 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y.803 E.06221 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y.257 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.009 Y-.856 E.04948 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.261 Y-1.149 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.122 Y-.288 E.03827 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.122 Y-.834 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.679 Y-1.276 E.01966 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-42.122 Y-.834 ;WIPE_END G1 X-39.925 Y-8.144 Z12.4 F30000 G1 X-39.352 Y-10.052 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z12.4 F30000 G1 X-51.352 Y-52.052 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:12.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G3 X50.24 Y-1.719 I.004 J1.738 E.00798 G1 X50.34 Y-1.709 E.00334 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.735 I-.663 J-1.607 E.20225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G3 X50.28 Y-2.124 I.001 J2.147 E.0093 G1 X50.42 Y-2.111 E.00467 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.983 E.25036 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.322 Y-2.557 E.00995 G1 X50.505 Y-2.539 E.00564 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.322 Y-2.557 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.98 Y.199 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442575 G1 F12752 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12752 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.189 Y-.951 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.226 Y-.936 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y-1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.954 Y-.954 G1 X51.184 Y-.633 G1 X51.323 Y-.263 G1 X51.323 Y.263 G1 X51.207 Y.571 ;WIPE_END G1 X48.442 Y-6.543 Z12.6 F30000 G1 X30.752 Y-52.052 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.772 Y-45.892 Z12.6 F30000 G1 X18.752 Y-15.47 Z12.6 G1 Z12.2 G1 E.8 F1800 M73 P77 R17 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G1 X18.752 Y-47.948 E1.07734 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.47 E1.07734 G1 X18.792 Y-15.47 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.063 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X18.345 Y-48.355 E1.10434 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.063 E1.10434 G1 X18.385 Y-15.063 E.03881 G1 X17.91 Y-14.628 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.04969 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-14.628 E1.04969 G1 X17.95 Y-14.628 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-16.628 ;WIPE_END G1 X18.752 Y-10.052 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G1 X18.752 Y-12.529 E.08218 G1 X19.148 Y-12.529 E.01313 G1 X19.148 Y-10.052 E.08218 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X18.345 Y-12.937 E.10919 G1 X19.555 Y-12.937 E.04014 G1 X19.555 Y-9.645 E.10919 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-13.372 E.12787 G1 X19.99 Y-13.372 E.06391 G1 X19.99 Y-9.21 E.12787 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.931 Y-11.21 ;WIPE_END G1 X13.873 Y-4.746 Z12.6 F30000 G1 X-2.945 Y22.045 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z12.6 F30000 G1 X-15.232 Y53.745 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z12.6 F30000 G1 X-5.6 Y52.94 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.259 J1.929 E.17717 G3 X-5.368 Y53.745 I-.496 J-1.895 E.0928 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.4287 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-18.276 Y55.489 I-2.665 J-.778 E.14967 G3 X-14.359 Y52.21 I1.247 J-2.489 E.33884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290588 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12752 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z12.6 F30000 G1 X-3.671 Y51.454 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12752 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01244 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01244 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12752 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-7.718 Y46.25 Z12.6 F30000 G1 X-39.352 Y-10.052 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.529 E.08218 G1 X-39.352 Y-12.529 E.01313 G1 X-39.352 Y-10.092 E.08085 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.937 E.10919 G1 X-38.945 Y-12.937 E.04014 G1 X-38.945 Y-9.685 E.10786 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-13.372 E.12787 G1 X-38.51 Y-13.372 E.06391 G1 X-38.51 Y-9.25 E.12664 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-15.47 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G1 X-39.748 Y-15.47 E.01313 G1 X-39.748 Y-47.948 E1.07734 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-15.51 E1.07601 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.063 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X-40.155 Y-15.063 E.04014 G1 X-40.155 Y-48.355 E1.10434 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.103 E1.10302 G1 X-38.51 Y-14.628 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-14.628 E.06391 G1 X-40.59 Y-48.79 E1.04969 G1 X-38.51 Y-48.79 E.06391 M73 P78 R17 G1 X-38.51 Y-14.668 E1.04846 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-14.63 ;WIPE_END G1 X-42.634 Y-21.961 Z12.6 F30000 G1 X-51.352 Y-52.052 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12752 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12752 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:12.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G3 X50.236 Y-1.72 I.004 J1.738 E.00786 G1 X50.34 Y-1.709 E.00345 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.735 I-.663 J-1.607 E.20224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G3 X50.276 Y-2.125 I.001 J2.147 E.00919 G1 X50.42 Y-2.111 E.00478 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.2504 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.319 Y-2.558 E.00985 G1 X50.505 Y-2.539 E.00575 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.319 Y-2.558 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.633 Y-1.184 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12572 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12572 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.846 Y.127 G1 X49.801 Y-.02 G1 X49.873 Y-.154 G1 X50.02 Y-.199 G1 X50.154 Y-.127 G1 X50.199 Y.02 G1 X50.127 Y.154 G1 X49.98 Y.199 ;WIPE_END G1 X47.344 Y-6.964 Z12.8 F30000 G1 X30.752 Y-52.052 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.756 Y-45.897 Z12.8 F30000 G1 X18.752 Y-15.764 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G1 X18.752 Y-47.948 E1.0676 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.764 E1.0676 G1 X18.792 Y-15.764 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.357 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X18.345 Y-48.355 E1.09461 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.357 E1.09461 G1 X18.385 Y-15.357 E.03881 G1 X17.91 Y-14.922 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.04067 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-14.922 E1.04067 G1 X17.95 Y-14.922 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-16.922 ;WIPE_END G1 X18.752 Y-10.052 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G1 X18.752 Y-12.236 E.07245 G1 X19.148 Y-12.236 E.01313 G1 X19.148 Y-10.052 E.07245 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X18.345 Y-12.643 E.09945 G1 X19.555 Y-12.643 E.04014 G1 X19.555 Y-9.645 E.09945 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-13.078 E.11886 G1 X19.99 Y-13.078 E.06391 G1 X19.99 Y-9.21 E.11886 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.929 Y-11.21 ;WIPE_END G1 X13.872 Y-4.745 Z12.8 F30000 G1 X-2.945 Y22.045 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z12.8 F30000 G1 X-15.232 Y53.745 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28684 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z12.8 F30000 G1 X-5.6 Y52.94 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.4287 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290583 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12572 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z12.8 F30000 G1 X-3.671 Y51.454 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12572 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.206 Y53 I2.994 J1.844 E.0317 G1 X-5.007 Y53.588 E.01909 G1 X-4.801 Y53.945 E.01264 G1 X-4.515 Y54.231 E.01244 G1 X-4.164 Y54.433 E.01245 G1 X-3.772 Y54.538 E.01245 G1 X-3.368 Y54.538 E.01244 G1 X-2.976 Y54.433 E.01245 G1 X-2.625 Y54.231 E.01245 G1 X-2.342 Y53.947 E.01233 G1 X-2.106 Y53.502 E.01548 G1 X-2.031 Y53.2 E.00956 G1 X-2.032 Y52.801 E.01225 G1 X-2.178 Y52.326 E.01528 G1 X-2.476 Y51.9 E.01597 G1 X-2.794 Y51.656 E.01232 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.808 Y53 I2.215 J1.383 E.02396 G1 X-4.61 Y53.521 E.01712 G1 X-4.39 Y53.822 E.01145 G2 X-2.976 Y53.998 I.827 J-.871 E.04688 G1 X-2.648 Y53.721 E.01319 G1 X-2.435 Y53.26 E.0156 G2 X-2.454 Y52.711 I-1.062 J-.238 E.01707 G1 X-2.521 Y52.494 E.00698 G1 X-2.752 Y52.164 E.01236 G1 X-3.109 Y51.934 E.01306 G2 X-3.665 Y51.836 I-.5 J1.213 E.01747 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G1 X-3.963 Y52.322 E.0098 G1 X-4.197 Y52.519 E.0094 G2 X-4.41 Y53 I1.444 J.925 E.01623 G1 X-4.249 Y53.393 E.01305 G1 X-4.051 Y53.627 E.00941 G1 X-3.771 Y53.758 E.0095 G1 X-3.467 Y53.784 E.00938 G1 X-3.165 Y53.671 E.00991 G1 X-2.955 Y53.494 E.00843 G1 X-2.786 Y53.108 E.01296 G1 X-2.864 Y52.661 E.01393 G1 X-3.107 Y52.367 E.01172 G1 X-3.365 Y52.236 E.00891 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12572 G1 X-3.82 Y52.674 E.00737 G1 X-3.98 Y52.908 E.0087 G1 X-4.012 Y53 E.003 G1 X-3.896 Y53.25 E.00847 G1 X-3.727 Y53.379 E.00653 G1 X-3.516 Y53.407 E.00653 G1 X-3.293 Y53.299 E.00763 G1 X-3.163 Y53.062 E.0083 G1 X-3.242 Y52.779 E.00902 G1 X-3.398 Y52.631 E.00662 G1 X-3.558 Y52.595 E.00505 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.398 Y52.631 G1 X-3.242 Y52.779 G1 X-3.163 Y53.062 G1 X-3.293 Y53.299 G1 X-3.516 Y53.407 G1 X-3.727 Y53.379 G1 X-3.896 Y53.25 G1 X-4.012 Y53 G1 X-3.98 Y52.908 G1 X-3.974 Y52.899 ;WIPE_END G1 X-7.714 Y46.245 Z12.8 F30000 G1 X-39.352 Y-10.052 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.236 E.07245 G1 X-39.352 Y-12.236 E.01313 G1 X-39.352 Y-10.092 E.07112 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.643 E.09945 G1 X-38.945 Y-12.643 E.04014 G1 X-38.945 Y-9.685 E.09813 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-13.078 E.11886 G1 X-38.51 Y-13.078 E.06391 G1 X-38.51 Y-9.25 E.11763 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-15.764 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G1 X-39.748 Y-15.764 E.01313 G1 X-39.748 Y-47.948 E1.0676 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-15.804 E1.06627 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.357 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X-40.155 Y-15.357 E.04014 G1 X-40.155 Y-48.355 E1.09461 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.397 E1.09328 G1 X-38.51 Y-14.922 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-14.922 E.06391 G1 X-40.59 Y-48.79 E1.04067 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-14.962 E1.03944 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-14.923 ;WIPE_END G1 X-42.649 Y-22.25 Z12.8 F30000 G1 X-51.352 Y-52.052 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12572 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12572 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:12.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;12.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G3 X50.233 Y-1.72 I.004 J1.738 E.00775 G1 X50.34 Y-1.709 E.00357 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G3 X50.273 Y-2.125 I.001 J2.147 E.00908 G1 X50.42 Y-2.111 E.0049 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.2504 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.316 Y-2.558 E.00974 G1 X50.505 Y-2.539 E.00585 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.316 Y-2.558 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.633 Y-1.184 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12505 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12505 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12505 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12505 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.146 Y-.565 ;WIPE_END G1 X47.456 Y-7.707 Z13 F30000 G1 X30.752 Y-52.052 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.749 Y-45.899 Z13 F30000 G1 X18.752 Y-15.898 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G1 X18.752 Y-47.948 E1.06317 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.898 E1.06317 G1 X18.792 Y-15.898 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.49 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X18.345 Y-48.355 E1.09018 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.49 E1.09018 G1 X18.385 Y-15.49 E.03881 G1 X17.91 Y-15.055 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.03657 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-15.055 E1.03657 G1 X17.95 Y-15.055 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-17.055 ;WIPE_END G1 X18.752 Y-10.052 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G1 X18.752 Y-12.102 E.06801 G1 X19.148 Y-12.102 E.01313 G1 X19.148 Y-10.052 E.06801 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X18.345 Y-12.51 E.09502 G1 X19.555 Y-12.51 E.04014 G1 X19.555 Y-9.645 E.09502 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-12.945 E.11475 G1 X19.99 Y-12.945 E.06391 G1 X19.99 Y-9.21 E.11475 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.929 Y-11.21 ;WIPE_END G1 X13.871 Y-4.745 Z13 F30000 G1 X-2.945 Y22.045 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z13 F30000 G1 X-15.232 Y53.745 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G3 X-16.776 Y51.071 I-1.791 J-.748 E.2862 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z13 F30000 G1 X-5.6 Y52.94 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.26 J1.925 E.26941 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.4287 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.4287 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.147 Y54.068 I2.67 J.796 E.47956 G1 X-6.241 Y53.79 E.009 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.29058 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12505 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.199 E.01233 G1 X-18.418 Y53.683 E.01559 G1 X-18.151 Y54.055 E.01407 G1 X-17.975 Y54.231 E.00765 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12505 G1 X-17.165 Y51.834 E.00874 G2 X-18.112 Y52.552 I.148 J1.179 E.03824 G1 X-18.191 Y52.984 E.01351 G2 X-17.743 Y53.929 I1.304 J-.04 E.03306 G2 X-16.101 Y53.713 I.713 J-.929 E.05653 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12505 G1 X-17.123 Y52.213 E.00595 G1 X-17.424 Y52.322 E.00982 G1 X-17.657 Y52.519 E.00938 G1 X-17.791 Y52.812 E.00992 G1 X-17.814 Y53.085 E.0084 G1 X-17.661 Y53.478 E.01296 G1 X-17.419 Y53.681 E.00972 G1 X-17.133 Y53.784 E.00933 G1 X-16.826 Y53.757 E.00948 G1 X-16.549 Y53.627 E.00941 G1 X-16.313 Y53.327 E.01173 G1 X-16.196 Y53.016 E.01021 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12505 G1 X-17.137 Y52.607 E.00655 G1 X-17.32 Y52.714 E.00652 G1 X-17.427 Y52.91 E.00685 G1 X-17.406 Y53.129 E.00676 G1 X-17.313 Y53.293 E.0058 G1 X-17.133 Y53.394 E.00632 G1 X-16.923 Y53.393 E.00644 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12505 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12505 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12505 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12505 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.008 Y45.961 Z13 F30000 G1 X-39.352 Y-10.052 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.102 E.06801 G1 X-39.352 Y-12.102 E.01313 G1 X-39.352 Y-10.092 E.06669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.51 E.09502 G1 X-38.945 Y-12.51 E.04014 G1 X-38.945 Y-9.685 E.09369 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-12.945 E.11475 G1 X-38.51 Y-12.945 E.06391 G1 X-38.51 Y-9.25 E.11352 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-15.898 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G1 X-39.748 Y-15.898 E.01313 G1 X-39.748 Y-47.948 E1.06317 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-15.938 E1.06184 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.49 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X-40.155 Y-15.49 E.04014 G1 X-40.155 Y-48.355 E1.09018 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.53 E1.08885 G1 X-38.51 Y-15.055 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-15.055 E.06391 G1 X-40.59 Y-48.79 E1.03657 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-15.095 E1.03534 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-15.057 ;WIPE_END G1 X-42.656 Y-22.381 Z13 F30000 G1 X-51.352 Y-52.052 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12505 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12505 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:12.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G3 X50.23 Y-1.72 I.004 J1.738 E.00764 G1 X50.34 Y-1.709 E.00368 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G3 X50.27 Y-2.125 I.001 J2.147 E.00897 G1 X50.42 Y-2.111 E.00501 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.25039 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.312 Y-2.558 E.00964 G1 X50.505 Y-2.539 E.00596 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.312 Y-2.558 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.829 Y-.563 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12461 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442576 G1 F12461 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12461 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12461 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.715 Y-.39 G1 X48.878 Y-.749 G1 X48.923 Y-.797 ;WIPE_END G1 X46.373 Y-7.991 Z13.2 F30000 G1 X30.752 Y-52.052 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.744 Y-45.901 Z13.2 F30000 G1 X18.752 Y-15.992 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G1 X18.752 Y-47.948 E1.06002 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.992 E1.06002 G1 X18.792 Y-15.992 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.585 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X18.345 Y-48.355 E1.08703 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.585 E1.08703 G1 X18.385 Y-15.585 E.03881 G1 X17.91 Y-15.15 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.03365 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-15.15 E1.03365 G1 X17.95 Y-15.15 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-17.15 ;WIPE_END G1 X18.752 Y-10.052 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G1 X18.752 Y-12.008 E.06487 G1 X19.148 Y-12.008 E.01313 G1 X19.148 Y-10.052 E.06487 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X18.345 Y-12.415 E.09188 G1 X19.555 Y-12.415 E.04014 G1 X19.555 Y-9.645 E.09188 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-12.85 E.11184 G1 X19.99 Y-12.85 E.06391 G1 X19.99 Y-9.21 E.11184 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.928 Y-11.21 ;WIPE_END G1 X13.87 Y-4.745 Z13.2 F30000 G1 X-2.945 Y22.045 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z13.2 F30000 G1 X-15.232 Y53.745 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z13.2 F30000 G1 X-5.6 Y52.94 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290584 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12461 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12461 G1 X-17.165 Y51.834 E.00873 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12461 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12461 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12461 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00648 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12461 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00942 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12461 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12461 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.0316 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01244 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.008 Y45.961 Z13.2 F30000 G1 X-39.352 Y-10.052 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.008 E.06487 G1 X-39.352 Y-12.008 E.01313 G1 X-39.352 Y-10.092 E.06354 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.415 E.09188 G1 X-38.945 Y-12.415 E.04014 G1 X-38.945 Y-9.685 E.09055 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-12.85 E.11184 G1 X-38.51 Y-12.85 E.06391 G1 X-38.51 Y-9.25 E.11061 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-15.992 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G1 X-39.748 Y-15.992 E.01313 G1 X-39.748 Y-47.948 E1.06002 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-16.032 E1.0587 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.585 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X-40.155 Y-15.585 E.04014 G1 X-40.155 Y-48.355 E1.08703 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.625 E1.0857 G1 X-38.51 Y-15.15 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-15.15 E.06391 G1 X-40.59 Y-48.79 E1.03365 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-15.19 E1.03242 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-15.152 ;WIPE_END G1 X-42.661 Y-22.475 Z13.2 F30000 G1 X-51.352 Y-52.052 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12461 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12461 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:13 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;13 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.4 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G3 X50.226 Y-1.721 I.004 J1.738 E.00753 G1 X50.34 Y-1.709 E.00379 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G3 X50.266 Y-2.126 I.001 J2.147 E.00885 G1 X50.42 Y-2.111 E.00512 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.25039 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.309 Y-2.559 E.00954 G1 X50.505 Y-2.539 E.00606 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.309 Y-2.559 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.02 Y-.199 Z13.4 F30000 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442579 G1 F12455 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12455 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.189 Y-.951 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.226 Y-.936 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y-1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.954 Y-.954 G1 X51.184 Y-.633 G1 X51.323 Y-.263 G1 X51.323 Y.263 G1 X51.207 Y.571 ;WIPE_END G1 X48.442 Y-6.543 Z13.4 F30000 G1 X30.752 Y-52.052 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.742 Y-45.901 Z13.4 F30000 G1 X18.752 Y-16.032 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G1 X18.752 Y-47.948 E1.0587 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-16.032 E1.0587 G1 X18.792 Y-16.032 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.625 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X18.345 Y-48.355 E1.08571 G1 X19.555 Y-48.355 E.04014 M73 P79 R17 G1 X19.555 Y-15.625 E1.08571 G1 X18.385 Y-15.625 E.03881 G1 X17.91 Y-15.19 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.03243 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-15.19 E1.03243 G1 X17.95 Y-15.19 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-17.19 ;WIPE_END G1 X18.752 Y-10.052 Z13.4 F30000 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G1 X18.752 Y-11.968 E.06355 G1 X19.148 Y-11.968 E.01313 G1 X19.148 Y-10.052 E.06355 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X18.345 Y-12.375 E.09056 G1 X19.555 Y-12.375 E.04014 G1 X19.555 Y-9.645 E.09056 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-12.81 E.11061 G1 X19.99 Y-12.81 E.06391 G1 X19.99 Y-9.21 E.11061 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.928 Y-11.21 ;WIPE_END G1 X13.87 Y-4.745 Z13.4 F30000 M73 P79 R16 G1 X-2.945 Y22.045 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z13.4 F30000 G1 X-15.232 Y53.745 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28683 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z13.4 F30000 G1 X-5.6 Y52.94 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-3.066 Y54.879 I-.259 J1.929 E.17717 G3 X-5.368 Y53.745 I-.496 J-1.895 E.0928 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.4287 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.4287 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-18.262 Y55.496 I-2.665 J-.778 E.14919 G3 X-14.359 Y52.21 I1.23 J-2.5 E.33975 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290581 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12455 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z13.4 F30000 G1 X-3.671 Y51.454 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12455 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12455 G1 X-3.82 Y52.674 E.00736 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-7.718 Y46.25 Z13.4 F30000 G1 X-39.352 Y-10.052 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-11.968 E.06355 G1 X-39.352 Y-11.968 E.01313 G1 X-39.352 Y-10.092 E.06222 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.375 E.09056 G1 X-38.945 Y-12.375 E.04014 G1 X-38.945 Y-9.685 E.08923 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-12.81 E.11061 G1 X-38.51 Y-12.81 E.06391 G1 X-38.51 Y-9.25 E.10939 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-16.032 Z13.4 F30000 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G1 X-39.748 Y-16.032 E.01313 G1 X-39.748 Y-47.948 E1.0587 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-16.072 E1.05738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.625 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X-40.155 Y-15.625 E.04014 G1 X-40.155 Y-48.355 E1.08571 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.665 E1.08438 G1 X-38.51 Y-15.19 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-15.19 E.06391 G1 X-40.59 Y-48.79 E1.03243 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-15.23 E1.0312 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-15.192 ;WIPE_END G1 X-42.663 Y-22.514 Z13.4 F30000 G1 X-51.352 Y-52.052 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12455 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12455 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:13.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G3 X50.223 Y-1.721 I.004 J1.738 E.00741 G1 X50.34 Y-1.709 E.0039 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G3 X50.263 Y-2.126 I.001 J2.147 E.00874 G1 X50.42 Y-2.111 E.00523 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.25038 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.305 Y-2.559 E.00943 G1 X50.505 Y-2.539 E.00616 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.305 Y-2.559 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.199 Y.02 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.44258 G1 F12447 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.18 Y.055 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.585 Y.058 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12447 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.574 Y.096 E.00582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X46.374 Y-6.529 Z13.6 F30000 G1 X30.752 Y-52.052 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.742 Y-45.901 Z13.6 F30000 G1 X18.752 Y-16.032 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G1 X18.752 Y-47.948 E1.0587 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-16.032 E1.0587 G1 X18.792 Y-16.032 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.625 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X18.345 Y-48.355 E1.08571 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.625 E1.08571 G1 X18.385 Y-15.625 E.03881 G1 X17.91 Y-15.19 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.03243 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-15.19 E1.03243 G1 X17.95 Y-15.19 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-17.19 ;WIPE_END G1 X18.752 Y-10.052 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G1 X18.752 Y-11.968 E.06355 G1 X19.148 Y-11.968 E.01313 G1 X19.148 Y-10.052 E.06355 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X18.345 Y-12.375 E.09056 G1 X19.555 Y-12.375 E.04014 G1 X19.555 Y-9.645 E.09056 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-12.81 E.11061 G1 X19.99 Y-12.81 E.06391 G1 X19.99 Y-9.21 E.11061 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.928 Y-11.21 ;WIPE_END G1 X13.87 Y-4.745 Z13.6 F30000 G1 X-2.945 Y22.045 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z13.6 F30000 G1 X-15.232 Y53.745 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G3 X-16.776 Y51.071 I-1.796 J-.746 E.28697 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z13.6 F30000 G1 X-5.6 Y52.94 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-18.258 Y55.498 I-2.665 J-.778 E.14906 G3 X-14.359 Y52.21 I1.229 J-2.498 E.33945 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y52.924 E.00287 ;WIDTH:0.290588 G1 X-14.79 Y52.849 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12447 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00943 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00903 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.741 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12447 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12447 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01244 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.008 Y45.961 Z13.6 F30000 G1 X-39.352 Y-10.052 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-11.968 E.06355 G1 X-39.352 Y-11.968 E.01313 G1 X-39.352 Y-10.092 E.06222 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.375 E.09056 G1 X-38.945 Y-12.375 E.04014 G1 X-38.945 Y-9.685 E.08923 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-12.81 E.11061 G1 X-38.51 Y-12.81 E.06391 G1 X-38.51 Y-9.25 E.10939 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-16.032 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G1 X-39.748 Y-16.032 E.01313 G1 X-39.748 Y-47.948 E1.0587 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-16.072 E1.05738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.625 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X-40.155 Y-15.625 E.04014 G1 X-40.155 Y-48.355 E1.08571 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.665 E1.08438 G1 X-38.51 Y-15.19 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-15.19 E.06391 G1 X-40.59 Y-48.79 E1.03243 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-15.23 E1.0312 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-15.192 ;WIPE_END G1 X-42.663 Y-22.514 Z13.6 F30000 G1 X-51.352 Y-52.052 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12447 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12447 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:13.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G3 X50.22 Y-1.721 I.004 J1.738 E.0073 G1 X50.34 Y-1.709 E.00401 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20224 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G3 X50.259 Y-2.126 I.001 J2.147 E.00863 G1 X50.42 Y-2.111 E.00534 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.983 E.25038 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.302 Y-2.559 E.00933 G1 X50.505 Y-2.539 E.00627 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.302 Y-2.559 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.148 Y-1.038 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12482 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F12482 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12482 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12482 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y.806 G1 X50.189 Y.951 G1 X49.811 Y.951 G1 X49.461 Y.806 G1 X49.194 Y.539 G1 X49.137 Y.402 ;WIPE_END G1 X46.612 Y-6.8 Z13.8 F30000 G1 X30.752 Y-52.052 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.744 Y-45.901 Z13.8 F30000 G1 X18.752 Y-15.992 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G1 X18.752 Y-47.948 E1.06002 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.992 E1.06002 G1 X18.792 Y-15.992 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.585 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X18.345 Y-48.355 E1.08703 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.585 E1.08703 G1 X18.385 Y-15.585 E.03881 G1 X17.91 Y-15.15 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.03365 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-15.15 E1.03365 G1 X17.95 Y-15.15 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-17.15 ;WIPE_END G1 X18.752 Y-10.052 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G1 X18.752 Y-12.008 E.06487 G1 X19.148 Y-12.008 E.01313 G1 X19.148 Y-10.052 E.06487 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X18.345 Y-12.415 E.09188 G1 X19.555 Y-12.415 E.04014 G1 X19.555 Y-9.645 E.09188 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-12.85 E.11184 G1 X19.99 Y-12.85 E.06391 G1 X19.99 Y-9.21 E.11184 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.928 Y-11.21 ;WIPE_END G1 X13.87 Y-4.745 Z13.8 F30000 G1 X-2.945 Y22.045 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z13.8 F30000 G1 X-15.232 Y53.745 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z13.8 F30000 G1 X-5.6 Y52.94 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.26997 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X-5.744 Y52.099 E.01708 G3 X-5.608 Y54.177 I2.172 J.901 E.41851 G1 X-5.744 Y53.901 E.01021 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42886 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290583 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12482 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.203 E.01245 G1 X-18.463 Y53.594 E.01245 G1 X-18.261 Y53.945 E.01245 G1 X-17.975 Y54.231 E.01244 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12482 G1 X-17.165 Y51.834 E.00874 G2 X-16.101 Y53.713 I.141 J1.161 E.14121 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12482 G1 X-17.123 Y52.213 E.00595 G1 X-17.423 Y52.321 E.00978 G1 X-17.657 Y52.519 E.00942 G1 X-17.788 Y52.798 E.00946 G1 X-17.814 Y53.103 E.00943 G1 X-17.709 Y53.393 E.00946 G1 X-17.511 Y53.627 E.00942 G1 X-17.232 Y53.758 E.00947 G1 X-16.927 Y53.784 E.00942 G1 X-16.637 Y53.678 E.00949 G1 X-16.403 Y53.481 E.00939 G1 X-16.196 Y53.016 E.01565 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12482 G1 X-17.136 Y52.607 E.00654 G1 X-17.318 Y52.713 E.00646 G1 X-17.423 Y52.895 E.00647 G1 X-17.423 Y53.106 E.00647 G1 X-17.317 Y53.288 E.00647 G1 X-17.135 Y53.393 E.00648 G1 X-16.924 Y53.393 E.00649 G1 X-16.74 Y53.286 E.00651 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-3.727 Y52.621 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12482 G1 X-3.896 Y52.75 E.00653 G1 X-4.004 Y52.978 E.00774 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.194 Y52.844 E.00809 G1 X-3.323 Y52.677 E.00647 G1 X-3.518 Y52.596 E.00649 G1 X-3.687 Y52.616 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12482 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00903 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.806 Y52.795 E.00943 G1 X-2.948 Y52.522 E.00946 G1 X-3.175 Y52.315 E.00943 G1 X-3.469 Y52.222 E.00948 G1 X-3.623 Y52.215 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12482 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.671 Y51.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12482 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01245 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01245 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.168 Y51.501 G1 X-2.794 Y51.656 G1 X-2.473 Y51.903 G1 X-2.226 Y52.224 G1 X-2.104 Y52.52 ;WIPE_END G1 X-6.008 Y45.961 Z13.8 F30000 G1 X-39.352 Y-10.052 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.008 E.06487 G1 X-39.352 Y-12.008 E.01313 G1 X-39.352 Y-10.092 E.06354 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.415 E.09188 G1 X-38.945 Y-12.415 E.04014 G1 X-38.945 Y-9.685 E.09055 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-12.85 E.11184 G1 X-38.51 Y-12.85 E.06391 G1 X-38.51 Y-9.25 E.11061 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-15.992 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G1 X-39.748 Y-15.992 E.01313 G1 X-39.748 Y-47.948 E1.06002 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-16.032 E1.0587 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.585 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X-40.155 Y-15.585 E.04014 G1 X-40.155 Y-48.355 E1.08703 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.625 E1.0857 G1 X-38.51 Y-15.15 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-15.15 E.06391 G1 X-40.59 Y-48.79 E1.03365 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-15.19 E1.03242 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-15.152 ;WIPE_END G1 X-42.661 Y-22.475 Z13.8 F30000 G1 X-51.352 Y-52.052 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12482 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12482 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:13.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;13.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14 I-.529 J1.096 P1 F30000 G1 X50 Y-1.735 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G3 X50.216 Y-1.722 I.004 J1.738 E.00719 G1 X50.34 Y-1.709 E.00413 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20223 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G3 X50.256 Y-2.127 I.001 J2.147 E.00852 G1 X50.42 Y-2.111 E.00546 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25037 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.299 Y-2.56 E.00922 G1 X50.505 Y-2.539 E.00637 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.299 Y-2.56 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.633 Y1.184 Z14 F30000 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12535 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12535 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12535 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12535 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.349 Y-6.597 Z14 F30000 G1 X30.752 Y-52.052 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.749 Y-45.899 Z14 F30000 G1 X18.752 Y-15.898 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G1 X18.752 Y-47.948 E1.06317 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.898 E1.06317 G1 X18.792 Y-15.898 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.49 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X18.345 Y-48.355 E1.09018 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.49 E1.09018 G1 X18.385 Y-15.49 E.03881 G1 X17.91 Y-15.055 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.03657 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-15.055 E1.03657 G1 X17.95 Y-15.055 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-17.055 ;WIPE_END G1 X18.752 Y-10.052 Z14 F30000 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G1 X18.752 Y-12.102 E.06801 G1 X19.148 Y-12.102 E.01313 G1 X19.148 Y-10.052 E.06801 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X18.345 Y-12.51 E.09502 G1 X19.555 Y-12.51 E.04014 G1 X19.555 Y-9.645 E.09502 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-12.945 E.11475 G1 X19.99 Y-12.945 E.06391 G1 X19.99 Y-9.21 E.11475 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.929 Y-11.21 ;WIPE_END G1 X13.871 Y-4.745 Z14 F30000 G1 X-2.945 Y22.045 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z14 F30000 G1 X-15.232 Y53.745 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G3 X-16.776 Y51.071 I-1.792 J-.748 E.28628 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z14 F30000 G1 X-5.6 Y52.94 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X-5.744 Y52.099 E.01708 G3 X-5.608 Y54.177 I2.172 J.901 E.41851 G1 X-5.744 Y53.901 E.01021 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.4287 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 M73 P80 R16 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.29058 G1 X-14.79 Y53.151 E.00235 G1 X-16.628 Y51.501 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12535 G1 X-17.131 Y51.454 E.01552 G1 X-17.624 Y51.567 E.01552 G1 X-17.975 Y51.769 E.01245 G1 X-18.261 Y52.055 E.01244 G1 X-18.463 Y52.406 E.01245 G1 X-18.568 Y52.797 E.01245 G1 X-18.568 Y53.198 E.01232 G1 X-18.41 Y53.7 E.01615 G2 X-17.975 Y54.231 I1.871 J-1.09 E.0212 G1 X-17.624 Y54.433 E.01245 G1 X-17.232 Y54.538 E.01245 G1 X-16.828 Y54.538 E.01244 G1 X-16.436 Y54.433 E.01245 G1 X-16.085 Y54.231 E.01245 G1 X-15.799 Y53.945 E.01244 G2 X-15.395 Y53.003 I-2.947 J-1.823 E.03159 G1 X-15.688 Y52.222 E.02565 G1 X-15.933 Y51.903 E.01235 G1 X-16.254 Y51.656 E.01245 G1 X-16.591 Y51.517 E.01122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.881 Y51.848 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12535 G1 X-17.165 Y51.834 E.00874 G2 X-18.112 Y52.552 I.148 J1.179 E.03824 G1 X-18.191 Y52.982 E.01345 G2 X-18.012 Y53.628 I1.538 J-.079 E.02074 G1 X-17.743 Y53.929 E.01242 G2 X-16.101 Y53.713 I.713 J-.929 E.05653 G2 X-15.795 Y53.01 I-2.151 J-1.353 E.02366 G1 X-16.022 Y52.407 E.01979 G1 X-16.312 Y52.087 E.01327 G2 X-16.842 Y51.859 I-.68 J.849 E.01795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.93 Y52.222 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12535 G1 X-17.123 Y52.213 E.00595 G1 X-17.424 Y52.322 E.00983 G1 X-17.657 Y52.519 E.00937 G1 X-17.792 Y52.814 E.00998 G1 X-17.814 Y53.082 E.00827 G1 X-17.663 Y53.476 E.01296 G1 X-17.418 Y53.681 E.00981 G1 X-17.133 Y53.784 E.00931 G1 X-16.826 Y53.757 E.00949 G1 X-16.549 Y53.627 E.0094 G1 X-16.313 Y53.327 E.01173 G1 X-16.196 Y53.016 E.01021 G1 X-16.416 Y52.512 E.01692 G1 X-16.635 Y52.315 E.00902 G1 X-16.892 Y52.234 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.924 Y52.603 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12535 G1 X-17.137 Y52.607 E.00655 G1 X-17.32 Y52.715 E.00653 G1 X-17.428 Y52.912 E.00689 G2 X-17.312 Y53.294 I.509 J.054 E.01261 G1 X-17.133 Y53.394 E.0063 G1 X-16.923 Y53.393 E.00644 G1 X-16.74 Y53.286 E.0065 G1 X-16.596 Y53.022 E.00924 G1 X-16.74 Y52.71 E.01057 G1 X-16.889 Y52.623 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.450404 G1 F12000 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-4.073 Y51.738 Z14 F30000 G1 X-3.671 Y51.454 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12535 G1 X-4.164 Y51.567 E.01552 G1 X-4.515 Y51.769 E.01245 G1 X-4.801 Y52.055 E.01244 G2 X-5.205 Y52.997 I2.947 J1.823 E.03159 G1 X-4.912 Y53.778 E.02565 G1 X-4.667 Y54.097 E.01235 G1 X-4.346 Y54.344 E.01245 G1 X-3.972 Y54.499 E.01245 G1 X-3.57 Y54.552 E.01245 G1 X-3.168 Y54.499 E.01245 G1 X-2.794 Y54.344 E.01245 G1 X-2.473 Y54.097 E.01244 G1 X-2.226 Y53.776 E.01245 G1 X-2.071 Y53.402 E.01245 G1 X-2.018 Y53 E.01245 G1 X-2.071 Y52.598 E.01244 G1 X-2.226 Y52.224 E.01245 G1 X-2.473 Y51.903 E.01245 G1 X-2.794 Y51.656 E.01245 G1 X-3.168 Y51.501 E.01245 G1 X-3.632 Y51.458 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.705 Y51.834 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12535 G2 X-4.499 Y52.287 I.218 J1.305 E.02869 G2 X-4.805 Y52.99 I2.151 J1.353 E.02366 G1 X-4.578 Y53.593 E.01979 G1 X-4.288 Y53.913 E.01327 G2 X-3.42 Y51.849 I.718 J-.913 E.13121 G1 X-3.665 Y51.836 E.00754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.663 Y52.213 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12535 G1 X-3.963 Y52.322 E.00981 G1 X-4.197 Y52.519 E.00939 G1 X-4.404 Y52.984 E.01565 G1 X-4.184 Y53.488 E.01692 G1 X-3.965 Y53.685 E.00902 G1 X-3.671 Y53.778 E.0095 G1 X-3.365 Y53.764 E.00939 G1 X-3.092 Y53.622 E.00947 G1 X-2.885 Y53.395 E.00942 G1 X-2.793 Y53.102 E.00946 G1 X-2.793 Y52.897 E.00629 G1 X-2.885 Y52.605 E.00943 G1 X-3.093 Y52.378 E.00946 G1 X-3.365 Y52.236 E.00942 G1 X-3.623 Y52.216 E.00796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.597 Y52.586 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12535 G1 X-3.82 Y52.674 E.00737 G1 X-3.978 Y52.902 E.00851 G1 X-4.004 Y52.978 E.00246 G1 X-3.86 Y53.29 E.01057 G1 X-3.676 Y53.397 E.00653 G1 X-3.464 Y53.397 E.00653 G1 X-3.28 Y53.29 E.00653 G1 X-3.173 Y53.106 E.00653 G1 X-3.167 Y52.946 E.00492 G1 X-3.247 Y52.752 E.00647 G1 X-3.415 Y52.624 E.00648 G1 X-3.558 Y52.594 E.00449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-3.415 Y52.624 G1 X-3.247 Y52.752 G1 X-3.167 Y52.946 G1 X-3.173 Y53.106 G1 X-3.28 Y53.29 G1 X-3.464 Y53.397 G1 X-3.676 Y53.397 G1 X-3.86 Y53.29 G1 X-4.004 Y52.978 G1 X-3.979 Y52.904 ;WIPE_END G1 X-7.718 Y46.25 Z14 F30000 G1 X-39.352 Y-10.052 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.102 E.06801 G1 X-39.352 Y-12.102 E.01313 G1 X-39.352 Y-10.092 E.06669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.51 E.09502 G1 X-38.945 Y-12.51 E.04014 G1 X-38.945 Y-9.685 E.09369 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-12.945 E.11475 G1 X-38.51 Y-12.945 E.06391 G1 X-38.51 Y-9.25 E.11352 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-15.898 Z14 F30000 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G1 X-39.748 Y-15.898 E.01313 G1 X-39.748 Y-47.948 E1.06317 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-15.938 E1.06184 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.49 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X-40.155 Y-15.49 E.04014 G1 X-40.155 Y-48.355 E1.09018 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.53 E1.08885 G1 X-38.51 Y-15.055 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-15.055 E.06391 G1 X-40.59 Y-48.79 E1.03657 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-15.095 E1.03534 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-15.057 ;WIPE_END G1 X-42.656 Y-22.381 Z14 F30000 G1 X-51.352 Y-52.052 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12535 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12535 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:13.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G3 X50.213 Y-1.722 I.004 J1.738 E.00708 G1 X50.34 Y-1.709 E.00424 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20223 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G3 X50.253 Y-2.127 I.001 J2.147 E.0084 G1 X50.42 Y-2.111 E.00557 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25037 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.295 Y-2.56 E.00912 G1 X50.505 Y-2.539 E.00647 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.295 Y-2.56 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.148 Y1.038 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13043 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F13043 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F13043 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.834 Y.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F13043 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.349 Y-6.597 Z14.2 F30000 G1 X30.752 Y-52.052 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X27.756 Y-45.897 Z14.2 F30000 G1 X18.752 Y-15.764 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G1 X18.752 Y-47.948 E1.0676 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.764 E1.0676 G1 X18.792 Y-15.764 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-15.357 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X18.345 Y-48.355 E1.09461 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.357 E1.09461 G1 X18.385 Y-15.357 E.03881 G1 X17.91 Y-14.922 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9360 G1 X17.91 Y-15.685 E.02344 G1 F12000 G1 X17.91 Y-48.16 E.99787 G1 X17.91 Y-48.79 E.01936 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-15.685 E.99787 G1 F9360 G1 X19.99 Y-14.922 E.02344 G1 X19.226 Y-14.922 E.02348 G1 X18.714 Y-14.922 E.01573 G1 X17.95 Y-14.922 E.02348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F9360 G1 X17.948 Y-16.922 ;WIPE_END G1 X18.752 Y-10.052 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G1 X18.752 Y-12.236 E.07245 G1 X19.148 Y-12.236 E.01313 G1 X19.148 Y-10.052 E.07245 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X18.345 Y-12.643 E.09945 G1 X19.555 Y-12.643 E.04014 G1 X19.555 Y-9.645 E.09945 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-12.315 E.07605 G1 F9360 G1 X17.91 Y-13.078 E.02344 G1 X18.674 Y-13.078 E.02348 G1 X19.226 Y-13.078 E.01696 G1 X19.99 Y-13.078 E.02348 G1 X19.99 Y-12.315 E.02344 G1 F12000 G1 X19.99 Y-9.84 E.07605 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.929 Y-11.21 ;WIPE_END G1 X13.872 Y-4.745 Z14.2 F30000 G1 X-2.945 Y22.045 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-6.069 Y29.914 Z14.2 F30000 G1 X-15.232 Y53.745 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G3 X-16.776 Y51.071 I-1.795 J-.746 E.28688 G3 X-15.232 Y52.255 I-.254 J1.929 E.06759 G1 X-14.98 Y53 E.02608 G1 X-15.22 Y53.707 E.02476 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-15.345 Y53.973 G1 X-15.486 Y54.184 G1 X-15.654 Y54.376 G1 X-15.846 Y54.544 G1 X-16.057 Y54.685 G1 X-16.285 Y54.798 G1 X-16.526 Y54.879 G1 X-16.702 Y54.914 ;WIPE_END G1 X-9.187 Y53.578 Z14.2 F30000 G1 X-5.6 Y52.94 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X-5.368 Y52.255 E.02397 G3 X-3.316 Y51.071 I1.798 J.745 E.08448 G3 X-5.368 Y53.745 I-.256 J1.927 E.27 G1 X-5.62 Y53 E.02608 G1 X-5.613 Y52.978 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.91 Y52.587 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.4287 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 M73 P80 R15 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.4287 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.987 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-10.149 Y53 E.10273 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 X-10.3 Y53 F30000 ;WIDTH:0.450404 G1 F12000 G1 X-10.35 Y53 E.00168 ;WIDTH:0.40858 G1 X-10.401 Y53 E.0015 ;WIDTH:0.366755 G1 X-10.451 Y53 E.00133 ;WIDTH:0.345342 G1 X-14.613 Y53 E.10256 G1 X-14.702 Y53.076 E.00287 ;WIDTH:0.290584 G1 X-14.79 Y53.151 E.00235 G1 X-15.236 Y52.327 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.430553 G1 F12000 G1 X-16.357 Y51.206 E.0501 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.031 Y51.081 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.034 Y53.078 E.0892 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.173 Y53.487 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.516 Y51.144 E.10466 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.909 Y51.298 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.328 Y53.879 E.1153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.545 Y54.211 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.241 Y51.515 E.12045 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.515 Y51.789 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.819 Y54.485 E.12045 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.151 Y54.702 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.732 Y52.121 E.1153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.886 Y52.514 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.544 Y54.856 E.1046 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.03 Y54.919 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.949 Y53 E.08576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.808 Y53.688 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.703 Y54.794 E.04939 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.3 Y53.101 F30000 ;TYPE:Gap infill ;WIDTH:0.34626 G1 F12000 G1 X-10.3 Y58.151 E.12484 G1 X-10.3 Y53.101 F30000 ;WIDTH:0.40858 G1 F12000 G1 X-10.3 Y53.05 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-2.897 Y51.206 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.430554 G1 F12000 G1 X-1.776 Y52.327 E.0501 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.651 Y53.001 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.571 Y51.081 E.08576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.056 Y51.144 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-1.714 Y53.486 E.10461 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-1.868 Y53.879 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-4.449 Y51.298 E.1153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.781 Y51.515 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.085 Y54.211 E.12045 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.359 Y54.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.055 Y51.789 E.12045 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.272 Y52.121 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-2.691 Y54.702 E.1153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.084 Y54.856 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.427 Y52.513 E.10466 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.566 Y52.923 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-3.57 Y54.919 E.08919 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.243 Y54.794 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-5.364 Y53.673 E.05009 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.243 Y54.794 ;WIPE_END G1 X-7.877 Y48.082 Z14.2 F30000 G1 X-39.352 Y-10.052 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.236 E.07245 G1 X-39.352 Y-12.236 E.01313 G1 X-39.352 Y-10.092 E.07112 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.643 E.09945 G1 X-38.945 Y-12.643 E.04014 G1 X-38.945 Y-9.685 E.09813 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-12.315 E.07605 G1 F9360 G1 X-40.59 Y-13.078 E.02344 G1 X-39.826 Y-13.078 E.02348 G1 X-39.274 Y-13.078 E.01696 G1 X-38.51 Y-13.078 E.02348 G1 X-38.51 Y-12.315 E.02344 G1 F12000 G1 X-38.51 Y-9.88 E.07482 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-39.352 Y-15.764 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G1 X-39.748 Y-15.764 E.01313 G1 X-39.748 Y-47.948 E1.0676 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-15.804 E1.06627 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-15.357 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X-40.155 Y-15.357 E.04014 G1 X-40.155 Y-48.355 E1.09461 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-15.397 E1.09328 G1 X-38.51 Y-14.922 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9360 G1 X-39.274 Y-14.922 E.02348 G1 X-39.826 Y-14.922 E.01696 G1 X-40.59 Y-14.922 E.02348 G1 X-40.59 Y-15.685 E.02344 G1 F12000 G1 X-40.59 Y-48.16 E.99787 G1 X-40.59 Y-48.79 E.01936 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-15.685 E.99787 G1 X-38.51 Y-14.962 E.02222 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-14.923 ;WIPE_END G1 X-42.649 Y-22.25 Z14.2 F30000 G1 X-51.352 Y-52.052 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13043 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13043 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:14 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;14 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.4 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.21 Y-1.722 I.004 J1.738 E.00697 G1 X50.34 Y-1.709 E.00435 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20223 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.249 Y-2.127 I.001 J2.147 E.00829 G1 X50.42 Y-2.111 E.00568 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25036 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.292 Y-2.56 E.00902 G1 X50.505 Y-2.539 E.00658 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.292 Y-2.56 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.148 Y-1.038 Z14.4 F30000 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F15000 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.049 Y.189 G1 X49.049 Y-.189 G1 X49.194 Y-.539 G1 X49.461 Y-.806 G1 X49.811 Y-.951 G1 X49.958 Y-.951 ;WIPE_END G1 X47.273 Y-8.096 Z14.4 F30000 G1 X30.752 Y-52.052 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z14.4 F30000 G1 X18.752 Y-47.948 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-15.47 E1.07734 G1 X18.752 Y-15.47 E.01313 G1 X18.752 Y-47.908 E1.07601 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-15.063 E1.10434 G1 X18.345 Y-15.063 E.04014 G1 X18.345 Y-48.315 E1.10302 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-15.552 E1.00195 G1 F1440 G1 X19.99 Y-14.628 E.02839 G1 X19.067 Y-14.628 E.02836 G1 X18.833 Y-14.628 E.00719 G1 X17.91 Y-14.628 E.02836 M106 S255 G1 X17.91 Y-15.552 E.02839 G1 F12000 G1 X17.91 Y-48.12 E1.00072 G1 X17.91 Y-48.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z14.4 F30000 G1 X18.752 Y-10.052 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-12.529 E.08218 G1 X19.148 Y-12.529 E.01313 G1 X19.148 Y-10.052 E.08218 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-12.937 E.10919 G1 X19.555 Y-12.937 E.04014 G1 X19.555 Y-9.645 E.10919 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-12.448 E.08014 G1 F1440 G1 X17.91 Y-13.372 E.02839 G1 X18.833 Y-13.372 E.02836 G1 X19.067 Y-13.372 E.00719 G1 X19.99 Y-13.372 E.02836 M106 S255 G1 X19.99 Y-12.448 E.02839 G1 F12000 G1 X19.99 Y-9.84 E.08014 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.931 Y-11.21 ;WIPE_END G1 X13.873 Y-4.746 Z14.4 F30000 G1 X-2.945 Y22.045 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z14.4 F30000 G1 X-5.296 Y52.747 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.253 Y52.549 E.00672 G3 X-3.798 Y51.269 I1.687 J.451 E.06817 G3 X-3.57 Y54.746 I.224 J1.732 E.18932 G3 X-5.3 Y52.787 I.004 J-1.747 E.09796 G1 X-4.867 Y52.829 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-3.741 Y51.701 I1.3 J.17 E.05264 G3 X-3.57 Y54.31 I.168 J1.299 E.13159 G3 X-4.871 Y52.869 I.003 J-1.311 E.0672 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.836 Y52.661 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.741 Y51.701 G1 X-3.493 Y51.701 ;WIPE_END G1 X-11.119 Y52.011 Z14.4 F30000 G1 X-15.487 Y52.188 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.42 Y52.333 E.00529 G3 X-17.03 Y54.746 I-1.614 J.667 E.11358 G3 X-17.258 Y51.269 I.004 J-1.747 E.17417 G3 X-15.521 Y52.129 I.224 J1.732 E.06817 G1 X-15.507 Y52.153 E.00095 G1 X-15.881 Y52.378 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.767 Y52.662 E.00939 G3 X-17.03 Y54.31 I-1.266 J.339 E.07369 G3 X-17.201 Y51.701 I.003 J-1.311 E.12106 G3 X-15.899 Y52.342 I.168 J1.299 E.04726 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.767 Y52.662 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.103 Y53.927 G1 X-16.329 Y54.1 ;WIPE_END G1 X-8.776 Y53.003 Z14.4 F30000 G1 X-5.91 Y52.587 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.4287 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.29979 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335724 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350971 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366224 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335725 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.29782 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z14.4 F30000 G1 Z14 G1 E.8 F1800 ;WIDTH:0.357045 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335719 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299783 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.561 Y54.98 E.00426 G1 X-17.808 Y54.896 E.00426 G1 X-18.049 Y54.778 E.00436 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297821 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335725 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.36622 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z14.4 F30000 G1 X-39.352 Y-10.052 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-12.529 E.08218 G1 X-39.352 Y-12.529 E.01313 G1 X-39.352 Y-10.092 E.08085 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-12.937 E.10919 G1 X-38.945 Y-12.937 E.04014 G1 X-38.945 Y-9.685 E.10786 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-12.448 E.08014 G1 F1440 G1 X-40.59 Y-13.372 E.02839 G1 X-39.667 Y-13.372 E.02836 G1 X-39.433 Y-13.372 E.00719 G1 X-38.51 Y-13.372 E.02836 M106 S255 G1 X-38.51 Y-12.448 E.02839 G1 F12000 G1 X-38.51 Y-9.88 E.07891 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G17 G3 Z14.4 I1.216 J.036 P1 F30000 G1 X-39.352 Y-47.948 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.352 Y-15.47 E1.07734 G1 X-39.748 Y-15.47 E.01313 G1 X-39.748 Y-47.948 E1.07734 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.945 Y-15.063 E1.10434 G1 X-40.155 Y-15.063 E.04014 G1 X-40.155 Y-48.355 E1.10434 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-15.552 E1.00195 G1 F1440 G1 X-38.51 Y-14.628 E.02839 G1 X-39.433 Y-14.628 E.02836 G1 X-39.667 Y-14.628 E.00719 G1 X-40.59 Y-14.628 E.02836 M106 S255 G1 X-40.59 Y-15.552 E.02839 G1 F12000 G1 X-40.59 Y-48.16 E1.00195 G1 X-40.59 Y-48.79 E.01936 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.548 Y-46.79 ;WIPE_END G1 X-45.607 Y-49.691 Z14.4 F30000 G1 X-51.352 Y-52.052 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:14.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.206 Y-1.723 I.004 J1.738 E.00685 G1 X50.34 Y-1.709 E.00446 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.734 I-.663 J-1.607 E.20223 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.246 Y-2.128 I.001 J2.147 E.00818 G1 X50.42 Y-2.111 E.00579 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25036 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.289 Y-2.561 E.00891 G1 X50.505 Y-2.539 E.00668 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.289 Y-2.561 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.806 Y.539 Z14.6 F30000 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F15000 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X48.184 Y-7.998 Z14.6 F30000 G1 X30.752 Y-52.052 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z14.6 F30000 G1 X18.752 Y-10.052 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-12.682 E.08724 G1 F2400 G1 X18.752 Y-13.582 E.02985 G1 F600 G1 X18.752 Y-13.782 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X18.752 Y-14.218 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X18.752 Y-14.418 E.00663 M106 S255 G1 F2400 G1 X18.752 Y-15.318 E.02985 G1 F18000 G1 X18.752 Y-47.948 E1.0824 G1 X19.148 Y-47.948 E.01314 G1 X19.148 Y-15.318 E1.0824 G1 F2400 G1 X19.148 Y-14.418 E.02985 G1 F600 G1 X19.148 Y-14.218 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X19.148 Y-13.782 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X19.148 Y-13.582 E.00663 M106 S255 G1 F2400 G1 X19.148 Y-12.682 E.02985 G1 F18000 G1 X19.148 Y-10.052 E.08724 G1 X18.792 Y-10.052 E.01181 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-9.9 E.00846 G1 X18.345 Y-12.682 E.09228 G1 F2400 G1 X18.345 Y-13.582 E.02985 G1 F600 G1 X18.345 Y-13.782 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X18.345 Y-14.218 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X18.345 Y-14.418 E.00663 M106 S255 G1 F2400 G1 X18.345 Y-15.318 E.02985 G1 F18000 G1 X18.345 Y-48.1 E1.08744 G1 X18.345 Y-48.355 E.00846 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-48.1 E.00846 G1 X19.555 Y-15.318 E1.08744 G1 F2400 G1 X19.555 Y-14.418 E.02985 G1 F600 G1 X19.555 Y-14.218 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X19.555 Y-13.782 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X19.555 Y-13.582 E.00663 M106 S255 G1 F2400 G1 X19.555 Y-12.682 E.02985 G1 F18000 G1 X19.555 Y-9.9 E.09228 G1 X19.555 Y-9.645 E.00846 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-12.742 E.08917 G1 F2400 G1 X17.91 Y-13.582 E.02581 G1 F600 G1 X17.91 Y-13.782 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X17.91 Y-14.218 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X17.91 Y-14.418 E.00615 M106 S255 G1 F2400 G1 X17.91 Y-15.258 E.02581 G1 F12000 G1 X17.91 Y-48.16 E1.01099 G1 X17.91 Y-48.79 E.01936 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-15.258 E1.01099 G1 F2400 G1 X19.99 Y-14.418 E.02581 G1 F600 G1 X19.99 Y-14.218 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X19.99 Y-13.782 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X19.99 Y-13.582 E.00615 M106 S255 G1 F2400 G1 X19.99 Y-12.742 E.02581 G1 F12000 G1 X19.99 Y-9.84 E.08917 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.933 Y-11.21 ;WIPE_END G1 X13.874 Y-4.746 Z14.6 F30000 G1 X-2.945 Y22.045 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z14.6 F30000 G1 X-5.296 Y52.746 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.259 Y52.548 E.0067 G3 X-4.021 Y51.313 I1.685 J.451 E.06075 G1 X-3.792 Y51.268 E.00773 G3 X-5.305 Y52.785 I.218 J1.731 E.28707 G1 X-4.857 Y52.821 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.837 Y52.66 E.00498 G3 X-3.909 Y51.734 I1.264 J.339 E.04221 G1 X-3.736 Y51.7 E.00541 G3 X-4.882 Y53 I.163 J1.299 E.19454 G1 X-4.862 Y52.861 E.00431 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.837 Y52.66 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.736 Y51.7 G1 X-3.484 Y51.701 ;WIPE_END G1 X-11.11 Y52.01 Z14.6 F30000 G1 X-15.488 Y52.187 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.421 Y52.334 E.00534 G3 X-17.481 Y51.313 I-1.613 J.665 E.28034 G1 X-17.252 Y51.268 E.00773 G3 X-15.522 Y52.129 I.218 J1.731 E.06795 G1 X-15.508 Y52.153 E.0009 G1 X-15.878 Y52.379 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.823 Y52.5 E.00407 G3 X-17.369 Y51.734 I-1.21 J.499 E.19484 G1 X-17.196 Y51.7 E.00541 G3 X-15.899 Y52.345 I.163 J1.299 E.04717 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.823 Y52.5 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.329 Y54.105 ;WIPE_END G1 X-8.777 Y53.005 Z14.6 F30000 G1 X-5.91 Y52.587 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42871 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242559 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299789 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335723 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350969 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387467 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.36622 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.33572 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297817 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242559 G2 X-3.831 Y55.033 I2.09 J-.34 E.04361 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.046 Y51.019 E.00447 G1 X-3.309 Y50.967 E.00436 G1 X-3.57 Y50.95 E.00426 G1 X-3.825 Y50.967 E.00415 G1 X-4.101 Y51.02 E.00457 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z14.6 F30000 G1 Z14.2 G1 E.8 F1800 ;WIDTH:0.357049 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335725 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299788 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242566 G3 X-15.134 Y53.778 I-5.76 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.561 Y54.98 E.00426 G1 X-17.808 Y54.896 E.00426 G1 X-18.049 Y54.778 E.00436 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.923 Y52.215 E.00437 G1 X-18.802 Y51.97 E.00446 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.552 Y51.018 E.0045 G1 X-17.298 Y50.968 E.00422 G1 X-17.037 Y50.95 E.00426 G1 X-16.769 Y50.967 E.00436 G3 X-14.982 Y52.723 I-.303 J2.096 E.04361 ;WIDTH:0.297814 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335718 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366216 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z14.6 F30000 G1 X-39.352 Y-10.052 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01314 G1 X-39.748 Y-12.682 E.08724 G1 F2400 G1 X-39.748 Y-13.582 E.02985 G1 F600 G1 X-39.748 Y-13.782 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-39.748 Y-14.218 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-39.748 Y-14.418 E.00663 M106 S255 G1 F2400 G1 X-39.748 Y-15.318 E.02985 G1 F18000 G1 X-39.748 Y-47.948 E1.0824 G1 X-39.352 Y-47.948 E.01314 G1 X-39.352 Y-15.318 E1.0824 G1 F2400 G1 X-39.352 Y-14.418 E.02985 G1 F600 G1 X-39.352 Y-14.218 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-39.352 Y-13.782 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-39.352 Y-13.582 E.00663 M106 S255 G1 F2400 G1 X-39.352 Y-12.682 E.02985 G1 F18000 G1 X-39.352 Y-10.092 E.08592 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-9.9 E.00846 G1 X-40.155 Y-12.682 E.09228 G1 F2400 G1 X-40.155 Y-13.582 E.02985 G1 F600 G1 X-40.155 Y-13.782 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-40.155 Y-14.218 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-40.155 Y-14.418 E.00663 M106 S255 G1 F2400 G1 X-40.155 Y-15.318 E.02985 G1 F18000 G1 X-40.155 Y-48.1 E1.08744 G1 X-40.155 Y-48.355 E.00846 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-48.1 E.00846 G1 X-38.945 Y-15.318 E1.08744 G1 F2400 G1 X-38.945 Y-14.418 E.02985 G1 F600 G1 X-38.945 Y-14.218 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-38.945 Y-13.782 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-38.945 Y-13.582 E.00663 M106 S255 G1 F2400 G1 X-38.945 Y-12.682 E.02985 G1 F18000 G1 X-38.945 Y-9.94 E.09096 G1 X-38.945 Y-9.685 E.00846 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-12.742 E.08917 G1 F2400 G1 X-40.59 Y-13.582 E.02581 G1 F600 G1 X-40.59 Y-13.782 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-40.59 Y-14.218 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-40.59 Y-14.418 E.00615 M106 S255 G1 F2400 G1 X-40.59 Y-15.258 E.02581 G1 F12000 G1 X-40.59 Y-48.16 E1.01099 G1 X-40.59 Y-48.79 E.01936 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-15.258 E1.01099 G1 F2400 G1 X-38.51 Y-14.418 E.02581 G1 F600 G1 X-38.51 Y-14.218 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-38.51 Y-13.782 E.01446 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-38.51 Y-13.582 E.00615 M106 S255 G1 F2400 G1 X-38.51 Y-12.742 E.02581 G1 F12000 G1 X-38.51 Y-9.88 E.08794 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G17 G3 Z14.6 I1.18 J-.299 P1 F30000 G1 X-51.352 Y-52.052 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 M73 P81 R15 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:14.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G3 X50.203 Y-1.723 I.005 J1.755 E.00674 G3 X48.39 Y-.667 I-.209 J1.726 E.28765 G3 X49.96 Y-1.734 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12422 G3 X50.243 Y-2.128 I.001 J2.147 E.00807 G1 X50.42 Y-2.111 E.0059 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25036 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.285 Y-2.561 E.00881 G1 X50.505 Y-2.539 E.00679 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.285 Y-2.561 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.194 Y.539 Z14.8 F30000 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12422 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12422 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12422 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.868 Y1.336 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12422 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.662 Y-.064 ;WIPE_END G1 X46.176 Y-7.281 Z14.8 F30000 G1 X30.752 Y-52.052 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12422 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z14.8 F30000 G1 X18.752 Y-10.052 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12422 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z14.8 F30000 G1 X-2.945 Y22.045 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.75 Y30.411 Z14.8 F30000 G1 X-4.937 Y51.915 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X-4.807 Y51.763 E.00664 G3 X-4.02 Y51.312 I1.231 J1.236 E.03043 G1 X-3.787 Y51.268 E.00785 G3 X-4.965 Y51.944 I.211 J1.732 E.31732 G1 X-4.612 Y52.201 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-3.908 Y51.734 I1.037 J.799 E.0264 G1 X-3.732 Y51.7 E.00552 G3 X-4.635 Y52.233 I.157 J1.299 E.21955 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.908 Y51.734 G1 X-3.732 Y51.7 G1 X-3.399 Y51.701 G1 X-3.231 Y51.734 G1 X-2.915 Y51.865 G1 X-2.85 Y51.908 ;WIPE_END G1 X-10.481 Y52.076 Z14.8 F30000 G1 X-15.489 Y52.186 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X-15.423 Y52.335 E.00539 G3 X-17.48 Y51.312 I-1.613 J.665 E.28043 G1 X-17.247 Y51.268 E.00785 G3 X-15.524 Y52.13 I.211 J1.732 E.06774 G1 X-15.51 Y52.152 E.00085 G1 X-15.882 Y52.376 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.77 Y52.662 E.00945 G3 X-17.368 Y51.734 I-1.265 J.337 E.18964 G1 X-17.192 Y51.7 E.00552 G3 X-15.903 Y52.342 I.157 J1.299 E.04686 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.77 Y52.662 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.326 Y54.102 ;WIPE_END G1 X-8.773 Y53.004 Z14.8 F30000 G1 X-5.91 Y52.587 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X-5.744 Y52.099 E.01708 G3 X-5.608 Y54.177 I2.172 J.901 E.41851 G1 X-5.744 Y53.901 E.01021 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-1.086 Y51.744 I2.67 J.792 E.20412 G3 X-6.241 Y53.79 I-2.485 J1.256 E.28425 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242572 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299787 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.333063 G1 X-5.668 Y52.936 E.00107 ;WIDTH:0.345654 G1 X-5.683 Y52.978 E.00111 ;WIDTH:0.382459 G1 X-5.695 Y53 E.00069 ;WIDTH:0.375952 G1 X-5.674 Y53.053 E.00156 ;WIDTH:0.33944 G1 X-5.652 Y53.107 E.00139 ;WIDTH:0.298326 G1 X-5.619 Y53.274 E.00356 ;WIDTH:0.242572 G2 X-4.094 Y54.981 I2.1 J-.341 E.03931 G1 X-3.831 Y55.033 E.00436 G1 X-3.57 Y55.05 E.00426 G1 X-3.309 Y55.033 E.00426 G1 X-3.039 Y54.98 E.00447 G1 X-2.792 Y54.896 E.00426 G1 X-2.545 Y54.775 E.00447 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.795 Y54.025 E.00436 G1 X-1.676 Y53.784 E.00436 G1 X-1.59 Y53.531 E.00436 G1 X-1.537 Y53.261 E.00447 G1 X-1.52 Y53 E.00426 G1 X-1.539 Y52.726 E.00447 G1 X-1.592 Y52.463 E.00436 G1 X-1.676 Y52.216 E.00426 G1 X-1.792 Y51.981 E.00426 G1 X-1.944 Y51.752 E.00447 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.046 Y51.019 E.00447 G1 X-3.309 Y50.967 E.00436 G1 X-3.57 Y50.95 E.00426 G1 X-3.82 Y50.966 E.00407 G1 X-4.101 Y51.02 E.00465 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.695 Y53 F30000 ;WIDTH:0.346325 G1 F12000 G1 X-10.149 Y53 E.11011 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z14.8 F30000 G1 Z14.4 G1 E.8 F1800 ;WIDTH:0.357048 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335723 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299787 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242576 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.561 Y54.98 E.00426 G1 X-17.808 Y54.896 E.00426 G1 X-18.049 Y54.778 E.00436 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.923 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.551 Y51.018 E.00453 G1 X-17.297 Y50.968 E.0042 G1 X-17.037 Y50.95 E.00426 G1 X-16.769 Y50.967 E.00436 G3 X-14.982 Y52.723 I-.303 J2.096 E.04361 ;WIDTH:0.297821 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335725 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.36622 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z14.8 F30000 G1 X-39.352 Y-10.052 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12422 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G17 G3 Z14.8 I1.18 J-.299 P1 F30000 G1 X-51.352 Y-52.052 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12422 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12422 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:14.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;14.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G3 X50.199 Y-1.723 I.004 J1.755 E.00663 G3 X48.39 Y-.667 I-.205 J1.726 E.28776 G3 X49.96 Y-1.733 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12407 G3 X50.239 Y-2.128 I.001 J2.147 E.00795 G1 X50.42 Y-2.111 E.00602 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25036 G1 X50.001 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.282 Y-2.561 E.00868 G1 X50.505 Y-2.539 E.00689 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.961 Y-2.585 E.01439 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.282 Y-2.561 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.778 Y-1.874 ;WIPE_END G1 X50.633 Y1.184 Z15 F30000 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12407 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12407 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12407 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12407 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.551 Y-.192 ;WIPE_END G1 X47.829 Y-7.323 Z15 F30000 G1 X30.752 Y-52.052 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12407 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z15 F30000 G1 X18.752 Y-10.052 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12407 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z15 F30000 G1 X-2.945 Y22.045 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.75 Y30.411 Z15 F30000 G1 X-4.937 Y51.915 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X-4.808 Y51.762 E.00664 G3 X-4.019 Y51.312 I1.229 J1.238 E.03048 G1 X-3.783 Y51.268 E.00797 G3 X-4.966 Y51.943 I.205 J1.732 E.31716 G1 X-4.612 Y52.2 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-3.908 Y51.734 I1.036 J.8 E.02642 G1 X-3.728 Y51.7 E.00563 G3 X-4.636 Y52.232 I.152 J1.3 E.21942 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.908 Y51.734 G1 X-3.728 Y51.7 G1 X-3.399 Y51.701 G1 X-3.231 Y51.734 G1 X-2.915 Y51.865 G1 X-2.85 Y51.908 ;WIPE_END G1 X-10.481 Y52.088 Z15 F30000 G1 X-15.479 Y52.206 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X-15.426 Y52.335 E.00464 G3 X-17.479 Y51.312 I-1.613 J.665 E.28052 G1 X-17.243 Y51.268 E.00797 G3 X-15.526 Y52.131 I.205 J1.732 E.06754 G1 X-15.5 Y52.172 E.0016 G1 X-15.869 Y52.398 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.826 Y52.501 E.00343 G3 X-17.368 Y51.734 I-1.21 J.499 E.19493 G1 X-17.188 Y51.7 E.00563 G3 X-15.901 Y52.348 I.152 J1.3 E.04689 G1 X-15.89 Y52.365 E.0006 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.826 Y52.501 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.348 Y54.117 ;WIPE_END G1 X-8.796 Y53.01 Z15 F30000 G1 X-5.91 Y52.587 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X-5.744 Y52.099 E.01708 G3 X-5.608 Y54.177 I2.172 J.901 E.41851 G1 X-5.744 Y53.901 E.01021 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.147 Y54.068 I2.67 J.796 E.47956 G1 X-6.241 Y53.79 E.009 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.547 Y52.462 F30000 ;TYPE:Gap infill ;WIDTH:0.242597 G1 F12000 G1 X-5.551 Y52.472 E.00017 G2 X-5.622 Y52.738 I4.019 J1.211 E.00448 ;WIDTH:0.299783 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.320468 G1 X-5.681 Y52.973 E.00192 ;WIDTH:0.380264 G1 X-5.695 Y53 E.00082 ;WIDTH:0.376304 G1 X-5.673 Y53.053 E.00156 ;WIDTH:0.339733 G1 X-5.652 Y53.107 E.00139 ;WIDTH:0.298514 G1 X-5.619 Y53.273 E.00353 ;WIDTH:0.242597 G2 X-4.094 Y54.981 I2.101 J-.341 E.03934 G1 X-3.838 Y55.032 E.00426 G1 X-3.576 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00457 G1 X-3.039 Y54.98 E.00426 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.327 Y54.63 E.00426 G1 X-2.116 Y54.445 E.00457 G1 X-1.944 Y54.248 E.00426 G1 X-1.795 Y54.025 E.00436 G1 X-1.676 Y53.784 E.00436 G1 X-1.592 Y53.537 E.00426 G1 X-1.537 Y53.261 E.00457 G1 X-1.52 Y53 E.00426 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.674 Y52.222 E.00426 G1 X-1.798 Y51.97 E.00457 G1 X-1.944 Y51.752 E.00426 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.54 Y51.228 E.00426 G1 X-2.792 Y51.104 E.00457 G1 X-3.039 Y51.02 E.00426 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.95 E.00436 G1 X-3.827 Y50.967 E.00419 G2 X-5.462 Y52.216 I.271 J2.051 E.03504 G1 X-5.534 Y52.424 E.00358 G1 X-5.695 Y53 F30000 ;WIDTH:0.346331 G1 F12000 G1 X-10.149 Y53 E.11012 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z15 F30000 G1 Z14.6 G1 E.8 F1800 ;WIDTH:0.357044 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335719 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299783 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242585 G3 X-15.048 Y53.524 I-4.017 J-.928 E.00441 G3 X-17.287 Y50.967 I-1.98 J-.525 E.14415 G1 X-17.03 Y50.95 E.00419 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.04361 ;WIDTH:0.297815 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335717 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366213 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z15 F30000 G1 X-39.352 Y-10.052 Z15 G1 Z14.6 M73 P81 R14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12407 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z15 F30000 G1 X-51.352 Y-52.052 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12407 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12407 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:14.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G3 X50.196 Y-1.724 I.004 J1.755 E.00652 G3 X48.39 Y-.667 I-.202 J1.727 E.28787 G3 X49.96 Y-1.733 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12425 G3 X50.236 Y-2.129 I.001 J2.147 E.00784 G1 X50.42 Y-2.111 E.00613 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.001 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.279 Y-2.562 E.00856 G1 X50.505 Y-2.539 E.00699 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.961 Y-2.585 E.0144 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.279 Y-2.562 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.778 Y-1.874 ;WIPE_END G1 X49.868 Y1.336 Z15.2 F30000 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12425 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12425 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12425 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12425 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.349 Y-6.597 Z15.2 F30000 G1 X30.752 Y-52.052 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12425 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z15.2 F30000 G1 X18.752 Y-10.052 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12425 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z15.2 F30000 G1 X-2.945 Y22.045 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z15.2 F30000 G1 X-5.296 Y52.743 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X-5.26 Y52.547 E.00659 G3 X-4.238 Y51.387 I1.685 J.453 E.05313 G3 X-3.778 Y51.267 I.643 J1.531 E.01581 G3 X-5.306 Y52.781 I.204 J1.733 E.28684 G1 X-4.869 Y52.827 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.841 Y52.659 E.00524 G3 X-3.908 Y51.734 I1.264 J.341 E.04232 G1 X-3.724 Y51.7 E.00574 G3 X-4.879 Y52.861 I.147 J1.301 E.19831 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.908 Y51.734 G1 X-3.724 Y51.7 G1 X-3.488 Y51.7 ;WIPE_END G1 X-11.102 Y52.227 Z15.2 F30000 G1 X-15.352 Y52.521 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X-15.349 Y52.549 E.00095 G3 X-17.698 Y51.387 I-1.686 J.451 E.26531 G3 X-17.238 Y51.267 I.643 J1.531 E.01581 G3 X-15.422 Y52.334 I.204 J1.733 E.07502 G1 X-15.366 Y52.483 E.0053 G1 X-15.773 Y52.663 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-17.368 Y51.734 I-1.265 J.337 E.18974 G1 X-17.184 Y51.7 E.00574 G3 X-15.784 Y52.625 I.147 J1.301 E.05599 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.375 Y54.135 G1 X-16.604 Y54.23 ;WIPE_END G1 X-9.06 Y53.071 Z15.2 F30000 G1 X-5.91 Y52.587 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42873 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.48842 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.438 F30000 ;TYPE:Gap infill ;WIDTH:0.242573 G1 F12000 G1 X-5.618 Y52.723 E.00484 G1 X-5.622 Y52.738 E.00025 ;WIDTH:0.299789 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335723 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.35097 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387468 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366218 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335719 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297816 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242573 G2 X-3.831 Y55.033 I2.09 J-.34 E.04361 G1 X-3.57 Y55.05 E.00426 G1 X-3.302 Y55.032 E.00436 G1 X-3.039 Y54.98 E.00436 G1 X-2.792 Y54.896 E.00426 G1 X-2.54 Y54.772 E.00457 G1 X-2.322 Y54.626 E.00426 G1 X-2.125 Y54.454 E.00426 G1 X-1.94 Y54.243 E.00457 G1 X-1.795 Y54.025 E.00426 G1 X-1.676 Y53.784 E.00436 G1 X-1.59 Y53.531 E.00436 G1 X-1.539 Y53.274 E.00426 G1 X-1.52 Y53 E.00447 G1 X-1.539 Y52.726 E.00447 G1 X-1.59 Y52.469 E.00426 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.94 Y51.757 E.00426 G1 X-2.125 Y51.546 E.00457 G1 X-2.322 Y51.374 E.00426 G1 X-2.54 Y51.228 E.00426 G1 X-2.792 Y51.104 E.00457 G1 X-3.039 Y51.02 E.00426 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.95 E.00436 G1 X-3.822 Y50.967 E.00411 G2 X-5.468 Y52.214 I.292 J2.095 E.0351 G1 X-5.521 Y52.399 E.00314 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z15.2 F30000 G1 Z14.8 G1 E.8 F1800 ;WIDTH:0.357049 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335724 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.29979 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242594 G3 X-15.048 Y53.524 I-4.027 J-.931 E.00441 G3 X-17.282 Y50.967 I-1.98 J-.525 E.14424 G1 X-17.03 Y50.95 E.00411 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.04361 ;WIDTH:0.297815 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335717 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366213 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z15.2 F30000 G1 X-39.352 Y-10.052 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12425 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z15.2 F30000 G1 X-51.352 Y-52.052 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12425 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12425 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:15 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;15 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.4 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G3 X50.193 Y-1.724 I.004 J1.755 E.0064 G3 X48.39 Y-.667 I-.199 J1.727 E.28797 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12341 G3 X50.233 Y-2.129 I.001 J2.147 E.00773 G1 X50.42 Y-2.111 E.00624 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.002 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.275 Y-2.562 E.00845 G1 X50.505 Y-2.539 E.0071 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.962 Y-2.585 E.01442 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.275 Y-2.562 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.778 Y-1.874 ;WIPE_END G1 X50.633 Y-1.184 Z15.4 F30000 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12341 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12341 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12341 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12341 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y.951 G1 X49.811 Y.951 G1 X49.461 Y.806 G1 X49.194 Y.539 G1 X49.049 Y.189 G1 X49.049 Y.042 ;WIPE_END G1 X46.519 Y-7.16 Z15.4 F30000 G1 X30.752 Y-52.052 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12341 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z15.4 F30000 G1 X18.752 Y-10.052 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12341 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z15.4 F30000 G1 X-2.945 Y22.045 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z15.4 F30000 G1 X-5.295 Y52.741 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X-5.26 Y52.547 E.00655 G3 X-4.238 Y51.387 I1.685 J.454 E.05314 G3 X-3.774 Y51.267 I.638 J1.517 E.01596 G3 X-5.306 Y52.78 I.199 J1.734 E.28674 G1 X-4.856 Y52.818 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.842 Y52.659 E.00489 G3 X-3.908 Y51.734 I1.263 J.342 E.04235 G1 X-3.72 Y51.699 E.00585 G3 X-4.888 Y53 I.141 J1.301 E.19389 G1 X-4.863 Y52.857 E.00446 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.842 Y52.659 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.908 Y51.734 G1 X-3.72 Y51.699 G1 X-3.482 Y51.7 ;WIPE_END G1 X-11.107 Y52.02 Z15.4 F30000 G1 X-15.48 Y52.203 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X-15.422 Y52.334 E.00475 G3 X-17.698 Y51.387 I-1.613 J.667 E.27291 G3 X-17.234 Y51.267 I.638 J1.517 E.01596 G3 X-15.523 Y52.13 I.199 J1.734 E.0673 G1 X-15.5 Y52.168 E.00148 G1 X-15.87 Y52.395 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.829 Y52.502 E.00353 G3 X-17.368 Y51.734 I-1.21 J.498 E.19501 G1 X-17.18 Y51.699 E.00585 G3 X-15.903 Y52.35 I.141 J1.301 E.04659 G1 X-15.894 Y52.363 E.00051 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.829 Y52.502 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.345 Y54.115 ;WIPE_END G1 X-8.794 Y53.009 Z15.4 F30000 G1 X-5.91 Y52.587 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42873 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 M73 P82 R14 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.438 F30000 ;TYPE:Gap infill ;WIDTH:0.242578 G1 F12000 G1 X-5.618 Y52.723 E.00484 G1 X-5.622 Y52.738 E.00025 ;WIDTH:0.299785 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335718 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350966 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387467 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366221 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.29782 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242578 G2 X-3.831 Y55.033 I2.09 J-.34 E.04361 G1 X-3.57 Y55.05 E.00426 G1 X-3.302 Y55.032 E.00436 G1 X-3.039 Y54.98 E.00436 G1 X-2.792 Y54.896 E.00426 G1 X-2.54 Y54.772 E.00457 G1 X-2.322 Y54.626 E.00426 G1 X-2.125 Y54.454 E.00426 G1 X-1.94 Y54.243 E.00457 G1 X-1.795 Y54.025 E.00426 G1 X-1.676 Y53.784 E.00436 G1 X-1.589 Y53.524 E.00447 G1 X-1.538 Y53.268 E.00426 G1 X-1.52 Y53 E.00436 G1 X-1.539 Y52.726 E.00447 G1 X-1.59 Y52.469 E.00426 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.94 Y51.757 E.00426 G1 X-2.125 Y51.546 E.00457 G1 X-2.322 Y51.374 E.00426 G1 X-2.54 Y51.228 E.00426 G1 X-2.792 Y51.104 E.00457 G1 X-3.039 Y51.02 E.00426 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.95 E.00436 G1 X-3.817 Y50.967 E.00403 G2 X-5.468 Y52.214 I.286 J2.095 E.03517 G1 X-5.521 Y52.399 E.00314 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z15.4 F30000 G1 Z15 G1 E.8 F1800 ;WIDTH:0.357044 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335717 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299784 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242578 G3 X-15.048 Y53.524 I-4.024 J-.93 E.00441 G3 X-17.277 Y50.967 I-1.979 J-.525 E.1443 G1 X-17.03 Y50.95 E.00403 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.04361 ;WIDTH:0.297821 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335725 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.36622 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z15.4 F30000 G1 X-39.352 Y-10.052 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12341 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z15.4 F30000 G1 X-51.352 Y-52.052 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12341 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12341 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:15.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G3 X50.189 Y-1.724 I.004 J1.755 E.00629 G3 X48.39 Y-.667 I-.195 J1.727 E.28808 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12369 G3 X50.229 Y-2.129 I.001 J2.147 E.00762 G1 X50.42 Y-2.111 E.00635 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.002 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.272 Y-2.562 E.00833 G1 X50.505 Y-2.539 E.0072 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.962 Y-2.585 E.01443 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.272 Y-2.562 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.779 Y-1.873 ;WIPE_END G1 X49.194 Y.539 Z15.6 F30000 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12369 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12369 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12369 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y-1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12369 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.954 Y-.954 G1 X51.184 Y-.633 G1 X51.323 Y-.263 G1 X51.323 Y.263 G1 X51.207 Y.571 ;WIPE_END G1 X48.442 Y-6.543 Z15.6 F30000 G1 X30.752 Y-52.052 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12369 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z15.6 F30000 G1 X18.752 Y-10.052 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12369 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z15.6 F30000 G1 X-2.945 Y22.045 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z15.6 F30000 G1 X-5.295 Y52.74 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X-5.261 Y52.547 E.00651 G3 X-4.443 Y51.488 I1.683 J.454 E.04556 G3 X-3.733 Y51.264 I.853 J1.471 E.02489 G3 X-5.306 Y52.779 I.156 J1.736 E.28509 G1 X-4.856 Y52.817 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.84 Y52.66 E.00485 G3 X-4.071 Y51.789 I1.264 J.342 E.03697 G3 X-3.705 Y51.698 I.541 J1.399 E.01164 G3 X-4.886 Y53 I.128 J1.303 E.19356 G1 X-4.863 Y52.856 E.00448 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.84 Y52.66 G1 X-4.781 Y52.499 G1 X-4.61 Y52.202 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.705 Y51.698 G1 X-3.48 Y51.7 ;WIPE_END G1 X-11.107 Y52.004 Z15.6 F30000 G1 X-15.492 Y52.179 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X-15.425 Y52.335 E.00563 G3 X-17.903 Y51.488 I-1.612 J.666 E.26519 G3 X-17.193 Y51.264 I.853 J1.471 E.02489 G3 X-15.526 Y52.131 I.156 J1.737 E.06584 G1 X-15.515 Y52.147 E.00061 G1 X-15.884 Y52.372 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.772 Y52.663 E.00959 G3 X-17.531 Y51.789 I-1.265 J.338 E.18449 G3 X-17.165 Y51.698 I.541 J1.399 E.01164 G3 X-15.907 Y52.339 I.128 J1.303 E.0458 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.772 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.323 Y54.1 ;WIPE_END G1 X-8.77 Y53.002 Z15.6 F30000 G1 X-5.91 Y52.587 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42874 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42874 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.48842 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.302475 G3 X-5.657 Y52.913 I-2.494 J-.415 E.00378 ;WIDTH:0.340684 G1 X-5.673 Y52.951 E.00101 ;WIDTH:0.360684 G1 X-5.696 Y53 E.0014 ;WIDTH:0.387464 G1 X-5.689 Y53.011 E.00036 ;WIDTH:0.366212 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335717 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297816 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z15.6 F30000 G1 Z15.2 G1 E.8 F1800 ;WIDTH:0.357049 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335724 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.29979 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.76 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.561 Y54.98 E.00426 G1 X-17.808 Y54.896 E.00426 G1 X-18.049 Y54.778 E.00436 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297817 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335717 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366213 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z15.6 F30000 G1 X-39.352 Y-10.052 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12369 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z15.6 F30000 G1 X-51.352 Y-52.052 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12369 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12369 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:15.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G3 X50.186 Y-1.725 I.004 J1.755 E.00618 G3 X48.39 Y-.667 I-.192 J1.728 E.28819 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12373 G3 X50.226 Y-2.13 I.001 J2.147 E.00751 G1 X50.42 Y-2.111 E.00646 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.002 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.269 Y-2.563 E.00821 G1 X50.505 Y-2.539 E.0073 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.963 Y-2.585 E.01444 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.269 Y-2.563 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.779 Y-1.873 ;WIPE_END G1 X49.868 Y1.336 Z15.8 F30000 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12373 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12373 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12373 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12373 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END G1 X47.745 Y-6.292 Z15.8 F30000 G1 X30.752 Y-52.052 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12373 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z15.8 F30000 G1 X18.752 Y-10.052 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12373 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z15.8 F30000 G1 X-2.945 Y22.045 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z15.8 F30000 G1 X-5.297 Y52.751 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X-5.261 Y52.547 E.00686 G3 X-4.443 Y51.488 I1.684 J.455 E.04556 G3 X-3.73 Y51.264 I.852 J1.47 E.02501 G3 X-5.308 Y52.788 I.152 J1.738 E.28486 G1 X-4.874 Y52.828 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-4.071 Y51.789 I1.297 J.173 E.04226 G3 X-3.701 Y51.698 I.537 J1.383 E.01175 G3 X-4.879 Y52.868 I.124 J1.303 E.19744 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.701 Y51.698 G1 X-3.493 Y51.7 ;WIPE_END G1 X-11.119 Y52.003 Z15.8 F30000 G1 X-15.493 Y52.177 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X-15.425 Y52.335 E.00569 G3 X-17.903 Y51.488 I-1.612 J.667 E.26533 G3 X-17.19 Y51.264 I.852 J1.47 E.02501 G3 X-15.525 Y52.131 I.152 J1.738 E.06573 G1 X-15.516 Y52.145 E.00055 G1 X-15.883 Y52.37 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.827 Y52.502 E.0044 G3 X-17.531 Y51.789 I-1.21 J.499 E.18967 G3 X-17.161 Y51.698 I.537 J1.383 E.01175 G3 X-15.908 Y52.339 I.124 J1.303 E.04566 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.827 Y52.502 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.322 Y54.1 ;WIPE_END G1 X-8.769 Y53.002 Z15.8 F30000 G1 X-5.91 Y52.587 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42874 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.48843 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350969 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366223 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335726 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297821 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.792 Y51.104 E.00436 G1 X-3.039 Y51.02 E.00426 G1 X-3.296 Y50.969 E.00426 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z15.8 F30000 G1 Z15.4 G1 E.8 F1800 ;WIDTH:0.357048 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335723 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299785 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.808 Y51.104 E.00436 G1 X-17.561 Y51.02 E.00426 G1 X-17.304 Y50.969 E.00426 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.29782 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335724 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366217 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z15.8 F30000 G1 X-39.352 Y-10.052 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12373 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z15.8 F30000 G1 X-51.352 Y-52.052 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12373 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12373 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:15.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;15.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G3 X50.183 Y-1.725 I.004 J1.755 E.00607 G3 X48.39 Y-.667 I-.189 J1.728 E.2883 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12413 G3 X50.223 Y-2.13 I.001 J2.147 E.00739 G1 X50.42 Y-2.111 E.00658 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.003 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.265 Y-2.563 E.0081 G1 X50.505 Y-2.539 E.00741 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.963 Y-2.585 E.01445 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.265 Y-2.563 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.779 Y-1.873 ;WIPE_END G1 X49.148 Y-1.038 Z16 F30000 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12413 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12413 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12413 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12413 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END G1 X47.745 Y-6.292 Z16 F30000 G1 X30.752 Y-52.052 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12413 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z16 F30000 G1 X18.752 Y-10.052 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12413 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 M73 P82 R13 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z16 F30000 G1 X-2.945 Y22.045 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z16 F30000 G1 X-5.297 Y52.749 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X-5.261 Y52.547 E.00681 G3 X-4.443 Y51.488 I1.684 J.454 E.04556 G3 X-3.726 Y51.264 I.852 J1.469 E.02513 G3 X-5.308 Y52.787 I.149 J1.737 E.28464 G1 X-4.875 Y52.828 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-4.071 Y51.789 I1.298 J.173 E.04227 G3 X-3.698 Y51.698 I.533 J1.369 E.01186 G3 X-4.879 Y52.868 I.12 J1.304 E.19737 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.698 Y51.698 G1 X-3.493 Y51.7 ;WIPE_END G1 X-11.119 Y52.002 Z16 F30000 G1 X-15.494 Y52.176 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X-15.42 Y52.333 E.00577 G3 X-18.667 Y53.6 I-1.61 J.667 E.18401 G3 X-17.186 Y51.264 I1.638 J-.599 E.10595 G3 X-15.521 Y52.129 I.156 J1.736 E.06573 G1 X-15.514 Y52.141 E.00047 G1 X-15.885 Y52.369 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.773 Y52.663 E.00968 G3 X-17.531 Y51.789 I-1.264 J.338 E.18437 G3 X-17.158 Y51.698 I.533 J1.369 E.01186 G3 X-15.91 Y52.337 I.12 J1.303 E.04547 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.773 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.321 Y54.099 ;WIPE_END G1 X-8.768 Y53.002 Z16 F30000 G1 X-5.91 Y52.587 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42873 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299783 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335719 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350967 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387466 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366216 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335718 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297814 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z16 F30000 G1 Z15.6 G1 E.8 F1800 ;WIDTH:0.357046 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.33572 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299785 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242552 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.561 Y54.98 E.00426 G1 X-17.808 Y54.896 E.00426 G1 X-18.049 Y54.778 E.00436 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297815 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335718 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366215 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z16 F30000 G1 X-39.352 Y-10.052 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12413 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z16 F30000 G1 X-51.352 Y-52.052 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12413 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12413 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:15.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G3 X50.179 Y-1.725 I.004 J1.755 E.00596 G3 X48.39 Y-.667 I-.185 J1.728 E.28841 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12410 G3 X50.219 Y-2.13 I.001 J2.147 E.00728 G1 X50.42 Y-2.111 E.00669 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.003 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.262 Y-2.563 E.00798 G1 X50.505 Y-2.539 E.00751 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.963 Y-2.585 E.01446 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.262 Y-2.563 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.779 Y-1.873 ;WIPE_END G1 X49.148 Y1.038 Z16.2 F30000 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12410 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12410 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F12410 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.834 Y.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12410 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.349 Y-6.597 Z16.2 F30000 G1 X30.752 Y-52.052 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12410 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z16.2 F30000 G1 X18.752 Y-10.052 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12410 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 M73 P83 R13 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z16.2 F30000 G1 X-2.945 Y22.045 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z16.2 F30000 G1 X-5.303 Y52.797 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X-5.306 Y52.771 E.00086 G3 X-4.443 Y51.488 I1.729 J.23 E.05317 G3 X-3.722 Y51.264 I.852 J1.469 E.02525 G3 X-5.321 Y53 I.145 J1.738 E.27747 G1 X-5.307 Y52.837 E.00543 G1 X-4.859 Y52.837 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.841 Y52.659 E.00547 G3 X-4.071 Y51.789 I1.264 J.342 E.03698 G3 X-3.694 Y51.698 I.529 J1.357 E.01197 G3 X-4.886 Y53 I.117 J1.304 E.19317 G1 X-4.866 Y52.876 E.00386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.694 Y51.698 G1 X-3.501 Y51.7 ;WIPE_END G1 X-11.127 Y52.001 Z16.2 F30000 G1 X-15.494 Y52.174 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X-15.42 Y52.333 E.00584 G3 X-18.668 Y53.597 I-1.61 J.667 E.18413 G3 X-17.182 Y51.264 I1.639 J-.596 E.10595 G3 X-15.521 Y52.129 I.152 J1.736 E.06561 G1 X-15.515 Y52.139 E.00041 G1 X-15.886 Y52.367 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.773 Y52.663 E.00972 G3 X-17.531 Y51.789 I-1.264 J.338 E.18437 G3 X-17.154 Y51.698 I.529 J1.357 E.01197 G3 X-15.91 Y52.336 I.116 J1.303 E.04531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.773 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.32 Y54.098 ;WIPE_END G1 X-8.767 Y53.002 Z16.2 F30000 G1 X-5.91 Y52.587 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42876 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-2.29 Y55.472 I2.67 J.79 E.33766 G3 X-6.241 Y53.79 I-1.286 J-2.461 E.15087 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.300972 G1 X-5.654 Y52.902 E.00352 ;WIDTH:0.337702 G1 X-5.672 Y52.945 E.00113 ;WIDTH:0.35229 G1 X-5.689 Y52.989 E.00118 ;WIDTH:0.387467 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366216 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335718 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297815 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.876 Y54.925 E.00281 G1 X-2.551 Y54.778 E.0058 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z16.2 F30000 G1 Z15.8 G1 E.8 F1800 ;WIDTH:0.357048 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335724 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299787 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.76 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.808 Y51.104 E.00436 G1 X-17.561 Y51.02 E.00426 G1 X-17.304 Y50.969 E.00426 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297815 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335717 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366213 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z16.2 F30000 G1 X-39.352 Y-10.052 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12410 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z16.2 F30000 G1 X-51.352 Y-52.052 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12410 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12410 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:16 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;16 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;16 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.4 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G3 X50.176 Y-1.726 I.004 J1.755 E.00584 G3 X48.39 Y-.667 I-.182 J1.729 E.28852 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12331 G3 X50.216 Y-2.131 I.001 J2.147 E.00717 G1 X50.42 Y-2.111 E.0068 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.823 J-1.983 E.25039 G1 X50.003 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.258 Y-2.564 E.00787 G1 X50.505 Y-2.539 E.00762 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.964 Y-2.585 E.01447 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.258 Y-2.564 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.873 ;WIPE_END G1 X50.806 Y-.539 Z16.4 F30000 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12331 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12331 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12331 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12331 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X48.184 Y-7.998 Z16.4 F30000 G1 X30.752 Y-52.052 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12331 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z16.4 F30000 G1 X18.752 Y-10.052 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12331 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z16.4 F30000 G1 X-2.945 Y22.045 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z16.4 F30000 G1 X-5.303 Y52.795 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X-5.306 Y52.771 E.00078 G3 X-4.443 Y51.488 I1.728 J.229 E.05316 G3 X-3.719 Y51.263 I.851 J1.468 E.02537 G3 X-5.321 Y53 I.141 J1.738 E.27722 G1 X-5.306 Y52.835 E.0055 G1 X-4.859 Y52.834 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.841 Y52.659 E.0054 G3 X-4.071 Y51.789 I1.263 J.342 E.03698 G3 X-3.69 Y51.697 I.526 J1.347 E.01208 G3 X-4.887 Y53 I.113 J1.304 E.19305 G1 X-4.865 Y52.874 E.00394 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.781 Y52.499 G1 X-4.61 Y52.202 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.69 Y51.697 G1 X-3.498 Y51.7 ;WIPE_END G1 X-11.125 Y52 Z16.4 F30000 G1 X-15.495 Y52.172 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X-15.426 Y52.335 E.0059 G3 X-17.903 Y51.488 I-1.612 J.667 E.26532 G3 X-17.179 Y51.263 I.851 J1.468 E.02537 G3 X-15.526 Y52.132 I.141 J1.739 E.06535 G1 X-15.519 Y52.14 E.00035 G1 X-15.886 Y52.366 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.774 Y52.663 E.00977 G3 X-17.531 Y51.789 I-1.264 J.338 E.18438 G3 X-17.15 Y51.697 I.526 J1.347 E.01208 G3 X-15.911 Y52.335 I.113 J1.303 E.04515 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.319 Y54.097 ;WIPE_END G1 X-8.765 Y53.001 Z16.4 F30000 G1 X-5.91 Y52.587 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42879 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42878 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.671 J.79 E.48846 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48845 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.300487 G1 X-5.654 Y52.898 E.00344 ;WIDTH:0.336846 G1 X-5.671 Y52.944 E.00117 ;WIDTH:0.351718 G1 X-5.689 Y52.989 E.00122 ;WIDTH:0.387467 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366221 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335725 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297822 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z16.4 F30000 G1 Z16 G1 E.8 F1800 ;WIDTH:0.357047 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335722 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299786 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.808 Y51.104 E.00436 G1 X-17.561 Y51.02 E.00426 G1 X-17.304 Y50.969 E.00426 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297823 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335726 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.36622 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z16.4 F30000 G1 X-39.352 Y-10.052 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12331 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z16.4 F30000 G1 X-51.352 Y-52.052 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12331 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12331 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:16.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;16.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G3 X50.173 Y-1.726 I.004 J1.755 E.00573 G3 X48.39 Y-.667 I-.179 J1.729 E.28863 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12358 G3 X50.212 Y-2.131 I.001 J2.147 E.00706 G1 X50.42 Y-2.111 E.00691 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25034 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.255 Y-2.564 E.00776 G1 X50.505 Y-2.539 E.00772 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.964 Y-2.585 E.01448 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.255 Y-2.564 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X49.148 Y1.038 Z16.6 F30000 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12358 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12358 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F12358 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.834 Y.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12358 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.349 Y-6.597 Z16.6 F30000 G1 X30.752 Y-52.052 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12358 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z16.6 F30000 G1 X18.752 Y-10.052 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12358 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z16.6 F30000 G1 X-2.945 Y22.045 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z16.6 F30000 G1 X-5.303 Y52.795 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X-5.298 Y52.773 E.00078 G3 X-3.715 Y51.263 I1.728 J.227 E.07842 G3 X-2.98 Y54.64 I.149 J1.736 E.16671 G3 X-5.313 Y53 I-.59 J-1.64 E.11076 G1 X-5.305 Y52.835 E.00547 G1 X-4.859 Y52.834 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.841 Y52.659 E.0054 G3 X-4.071 Y51.789 I1.263 J.342 E.03698 G3 X-3.687 Y51.697 I.524 J1.338 E.01219 G3 X-4.887 Y53 I.109 J1.304 E.19291 G1 X-4.865 Y52.874 E.00393 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.687 Y51.697 G1 X-3.498 Y51.7 ;WIPE_END G1 X-11.125 Y51.999 Z16.6 F30000 G1 X-15.496 Y52.17 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X-15.426 Y52.336 E.00597 G3 X-17.903 Y51.488 I-1.612 J.666 E.26521 G3 X-17.175 Y51.263 I.851 J1.468 E.02549 G3 X-15.526 Y52.132 I.137 J1.738 E.06522 G1 X-15.521 Y52.139 E.00028 G1 X-15.887 Y52.365 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.773 Y52.663 E.00982 G3 X-17.531 Y51.789 I-1.264 J.338 E.18449 G3 X-17.147 Y51.697 I.524 J1.338 E.01219 G3 X-15.912 Y52.334 I.109 J1.304 E.045 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.773 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.317 Y54.097 ;WIPE_END G1 X-8.764 Y53.001 Z16.6 F30000 G1 X-5.91 Y52.587 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-19.499 Y54.288 I-2.671 J-.791 E.20308 G3 X-14.359 Y52.21 I2.47 J-1.287 E.28529 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.29979 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335725 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350972 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387471 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366223 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335727 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297824 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.883 Y54.927 E.00269 G1 X-2.551 Y54.778 E.00592 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z16.6 F30000 G1 Z16.2 G1 E.8 F1800 ;WIDTH:0.357316 G1 F12000 G1 X-14.929 Y53.058 E.00162 ;WIDTH:0.336073 G1 X-14.947 Y53.105 E.00121 ;WIDTH:0.300016 G1 X-14.978 Y53.262 E.00336 ;WIDTH:0.242552 G3 X-15.134 Y53.778 I-5.76 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297809 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335712 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366207 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z16.6 F30000 G1 X-39.352 Y-10.052 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12358 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z16.6 F30000 G1 X-51.352 Y-52.052 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12358 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12358 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:16.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;16.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G3 X50.169 Y-1.726 I.004 J1.755 E.00562 G3 X48.39 Y-.667 I-.175 J1.729 E.28874 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12394 G3 X50.209 Y-2.131 I.001 J2.147 E.00695 G1 X50.42 Y-2.111 E.00702 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25034 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.252 Y-2.564 E.00765 G1 X50.505 Y-2.539 E.00782 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.964 Y-2.585 E.01449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.252 Y-2.564 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X50.806 Y.539 Z16.8 F30000 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12394 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12394 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12394 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12394 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X48.184 Y-7.998 Z16.8 F30000 G1 X30.752 Y-52.052 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12394 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z16.8 F30000 G1 X18.752 Y-10.052 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12394 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z16.8 F30000 G1 X-2.945 Y22.045 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z16.8 F30000 G1 X-5.303 Y52.793 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X-5.307 Y52.771 E.00072 G3 X-4.443 Y51.488 I1.729 J.231 E.05317 G3 X-3.712 Y51.263 I.851 J1.468 E.02561 G3 X-5.322 Y53 I.134 J1.739 E.27718 G1 X-5.307 Y52.833 E.00558 G1 X-4.858 Y52.832 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.841 Y52.659 E.00532 G3 X-4.071 Y51.789 I1.263 J.342 E.03698 G3 X-3.683 Y51.697 I.521 J1.33 E.01231 G3 X-4.886 Y53 I.105 J1.304 E.1927 G1 X-4.865 Y52.871 E.00402 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.683 Y51.697 G1 X-3.496 Y51.699 ;WIPE_END G1 X-11.122 Y51.997 Z16.8 F30000 G1 X-15.497 Y52.168 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X-15.427 Y52.336 E.00604 G3 X-17.903 Y51.488 I-1.611 J.665 E.26511 G3 X-17.172 Y51.263 I.851 J1.467 E.02561 G3 X-15.527 Y52.132 I.134 J1.738 E.06509 G1 X-15.523 Y52.137 E.00022 G1 X-15.888 Y52.363 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.774 Y52.664 E.00987 G3 X-17.531 Y51.789 I-1.264 J.338 E.18438 G3 X-17.143 Y51.697 I.521 J1.33 E.01231 G3 X-15.913 Y52.333 I.105 J1.304 E.04484 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.664 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.317 Y54.096 ;WIPE_END G1 X-8.763 Y53.001 Z16.8 F30000 G1 X-5.91 Y52.587 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48848 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299791 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335725 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350972 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387471 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366223 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335727 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297823 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z16.8 F30000 G1 Z16.4 G1 E.8 F1800 ;WIDTH:0.357051 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335725 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.29979 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.808 Y51.104 E.00436 G1 X-17.561 Y51.02 E.00426 G1 X-17.304 Y50.969 E.00426 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297822 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335726 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366222 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z16.8 F30000 G1 X-39.352 Y-10.052 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12394 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z16.8 F30000 G1 X-51.352 Y-52.052 Z16.8 G1 Z16.4 M73 P83 R12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12394 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12394 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:16.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;16.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G3 X50.166 Y-1.727 I.004 J1.755 E.00551 G3 X48.39 Y-.667 I-.172 J1.73 E.28885 M73 P84 R12 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12342 G3 X50.206 Y-2.132 I.001 J2.147 E.00683 G1 X50.42 Y-2.111 E.00714 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25034 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.248 Y-2.565 E.00754 G1 X50.505 Y-2.539 E.00793 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.964 Y-2.585 E.01449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.248 Y-2.565 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X49.148 Y-1.038 Z17 F30000 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12342 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12342 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12342 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442581 G1 F12342 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.846 Y.127 G1 X49.801 Y-.02 G1 X49.873 Y-.154 G1 X50.02 Y-.199 G1 X50.154 Y-.127 G1 X50.199 Y.02 G1 X50.127 Y.154 G1 X49.98 Y.199 ;WIPE_END G1 X47.344 Y-6.964 Z17 F30000 G1 X30.752 Y-52.052 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12342 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z17 F30000 G1 X18.752 Y-10.052 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12342 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z17 F30000 G1 X-2.945 Y22.045 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z17 F30000 G1 X-5.298 Y52.753 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X-5.261 Y52.547 E.00693 G3 X-4.443 Y51.488 I1.683 J.454 E.04556 G3 X-3.708 Y51.263 I.851 J1.467 E.02573 G3 X-5.309 Y52.791 I.13 J1.738 E.28381 G1 X-4.858 Y52.83 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.841 Y52.659 E.00528 G3 X-4.071 Y51.789 I1.263 J.342 E.03699 G3 X-3.68 Y51.697 I.52 J1.324 E.01242 G3 X-4.887 Y53 I.101 J1.305 E.19269 G1 X-4.865 Y52.87 E.00406 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.68 Y51.697 G1 X-3.494 Y51.699 ;WIPE_END G1 X-11.121 Y51.996 Z17 F30000 G1 X-15.498 Y52.166 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X-15.426 Y52.336 E.00611 G3 X-17.903 Y51.488 I-1.612 J.666 E.26521 G3 X-17.168 Y51.263 I.851 J1.467 E.02573 G3 X-15.527 Y52.132 I.13 J1.739 E.06498 G1 X-15.524 Y52.135 E.00015 G1 X-15.888 Y52.361 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.774 Y52.663 E.00992 G3 X-17.531 Y51.789 I-1.264 J.338 E.18449 G3 X-17.14 Y51.697 I.52 J1.324 E.01242 G3 X-15.914 Y52.332 I.101 J1.305 E.04468 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.315 Y54.095 ;WIPE_END G1 X-8.762 Y53 Z17 F30000 G1 X-5.91 Y52.587 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42873 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.671 J.79 E.48848 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48848 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299783 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335717 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350965 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387468 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366223 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335727 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297822 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z17 F30000 G1 Z16.6 G1 E.8 F1800 ;WIDTH:0.357049 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335726 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.29979 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.76 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.808 Y51.104 E.00436 G1 X-17.561 Y51.02 E.00426 G1 X-17.304 Y50.969 E.00426 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297815 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335717 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366213 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z17 F30000 G1 X-39.352 Y-10.052 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12342 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z17 F30000 G1 X-51.352 Y-52.052 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12342 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12342 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:16.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;16.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G3 X50.162 Y-1.727 I.004 J1.755 E.00539 G3 X48.39 Y-.667 I-.169 J1.73 E.28896 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12778 G3 X50.202 Y-2.132 I.001 J2.147 E.00672 G1 X50.42 Y-2.111 E.00725 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.245 Y-2.565 E.00744 G1 X50.505 Y-2.539 E.00803 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.964 Y-2.585 E.01449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.245 Y-2.565 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X50.058 Y.585 Z17.2 F30000 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12778 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12778 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12778 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.222 Y-.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12778 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X48.184 Y-7.998 Z17.2 F30000 G1 X30.752 Y-52.052 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12778 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z17.2 F30000 G1 X18.752 Y-47.948 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-37.784 E.33717 G1 X18.752 Y-37.784 E.01313 G1 X18.752 Y-47.908 E.33584 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12778 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-37.377 E.36417 G1 X18.345 Y-37.377 E.04014 G1 X18.345 Y-48.315 E.36285 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-36.942 E.36407 G1 X17.91 Y-36.942 E.06391 G1 X17.91 Y-48.75 E.36284 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z17.2 F30000 G1 X18.752 Y-10.052 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X18.752 Y-34.216 E.80157 G1 X19.148 Y-34.216 E.01313 G1 X19.148 Y-10.052 E.80157 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12778 G1 X18.345 Y-34.623 E.82858 G1 X19.555 Y-34.623 E.04014 G1 X19.555 Y-9.645 E.82858 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-35.058 E.79425 G1 X19.99 Y-35.058 E.06391 G1 X19.99 Y-9.21 E.79425 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z17.2 F30000 G1 X-2.945 Y22.045 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z17.2 F30000 G1 X-5.304 Y52.81 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X-5.306 Y52.771 E.0013 G3 X-4.443 Y51.488 I1.728 J.23 E.05317 G3 X-3.704 Y51.262 I.851 J1.467 E.02585 G3 X-5.321 Y53 I.126 J1.739 E.27672 G1 X-5.308 Y52.85 E.00499 G1 X-4.87 Y52.839 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.876 Y52.828 E.00037 G3 X-4.071 Y51.789 I1.297 J.174 E.04229 G3 X-3.676 Y51.696 I.518 J1.319 E.01253 G3 X-4.887 Y53 I.098 J1.305 E.19257 G1 X-4.874 Y52.879 E.00375 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.876 Y52.828 G1 X-4.836 Y52.661 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.676 Y51.696 G1 X-3.504 Y51.699 ;WIPE_END G1 X-11.131 Y51.995 Z17.2 F30000 G1 X-15.499 Y52.164 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X-15.426 Y52.336 E.00617 G3 X-17.903 Y51.488 I-1.612 J.666 E.26521 G3 X-17.164 Y51.262 I.851 J1.467 E.02585 G3 X-15.527 Y52.132 I.126 J1.739 E.06486 G1 X-15.525 Y52.134 E.00009 G1 X-15.889 Y52.36 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.774 Y52.663 E.00997 G3 X-17.531 Y51.789 I-1.264 J.338 E.18449 G3 X-17.136 Y51.696 I.518 J1.319 E.01253 G3 X-15.915 Y52.331 I.098 J1.305 E.04452 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.314 Y54.094 ;WIPE_END G1 X-8.76 Y53 Z17.2 F30000 G1 X-5.91 Y52.587 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42882 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299788 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335723 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.357047 G3 X-5.696 Y53 I-.202 J-.05 E.00164 ;WIDTH:0.387464 G1 X-5.689 Y53.011 E.00036 ;WIDTH:0.366212 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335714 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.29781 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z17.2 F30000 G1 Z16.8 G1 E.8 F1800 ;WIDTH:0.357047 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335724 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299787 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.808 Y51.104 E.00436 G1 X-17.561 Y51.02 E.00426 G1 X-17.304 Y50.969 E.00426 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297809 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335713 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366209 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z17.2 F30000 G1 X-39.352 Y-10.052 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-34.216 E.80157 G1 X-39.352 Y-34.216 E.01313 G1 X-39.352 Y-10.092 E.80025 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12778 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-34.623 E.82858 G1 X-38.945 Y-34.623 E.04014 G1 X-38.945 Y-9.685 E.82725 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-35.058 E.79425 G1 X-38.51 Y-35.058 E.06391 G1 X-38.51 Y-9.25 E.79302 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z17.2 F30000 G1 X-39.352 Y-47.948 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X-39.352 Y-37.784 E.33717 G1 X-39.748 Y-37.784 E.01313 G1 X-39.748 Y-47.948 E.33717 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12778 G1 X-38.945 Y-37.377 E.36417 G1 X-40.155 Y-37.377 E.04014 G1 X-40.155 Y-48.355 E.36417 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-36.942 E.36407 G1 X-40.59 Y-36.942 E.06391 G1 X-40.59 Y-48.79 E.36407 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.603 Y-49.69 Z17.2 F30000 G1 X-51.352 Y-52.052 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12778 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12778 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:17 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;17 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;17 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.4 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G3 X50.159 Y-1.727 I.004 J1.755 E.00528 G3 X48.39 Y-.667 I-.165 J1.73 E.28907 G3 X49.96 Y-1.733 I1.614 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12541 G3 X50.199 Y-2.132 I.001 J2.147 E.00661 G1 X50.42 Y-2.111 E.00736 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.242 Y-2.565 E.00734 G1 X50.505 Y-2.539 E.00813 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.964 Y-2.585 E.01449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.242 Y-2.565 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X49.868 Y1.336 Z17.4 F30000 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12541 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12541 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12541 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.189 Y-.951 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12541 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.226 Y-.936 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.702 Y.643 ;WIPE_END G1 X48 Y-6.495 Z17.4 F30000 G1 X30.752 Y-52.052 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12541 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z17.4 F30000 G1 X18.752 Y-47.948 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.243 E.32194 G1 X18.752 Y-38.243 E.01313 G1 X18.752 Y-47.908 E.32061 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12541 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-37.836 E.34894 G1 X18.345 Y-37.836 E.04014 G1 X18.345 Y-48.315 E.34762 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-37.401 E.34996 G1 X17.91 Y-37.401 E.06391 G1 X17.91 Y-48.75 E.34873 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z17.4 F30000 G1 X18.752 Y-10.052 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X18.752 Y-33.757 E.78634 G1 X19.148 Y-33.757 E.01313 G1 X19.148 Y-10.052 E.78634 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12541 G1 X18.345 Y-34.164 E.81335 G1 X19.555 Y-34.164 E.04014 G1 X19.555 Y-9.645 E.81335 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-34.599 E.78014 G1 X19.99 Y-34.599 E.06391 G1 X19.99 Y-9.21 E.78014 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z17.4 F30000 G1 X-2.945 Y22.045 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z17.4 F30000 G1 X-5.297 Y52.751 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X-5.262 Y52.547 E.00689 G3 X-4.443 Y51.488 I1.684 J.456 E.04557 G3 X-3.701 Y51.262 I.851 J1.467 E.02597 G3 X-5.309 Y52.789 I.123 J1.74 E.28394 G1 X-4.858 Y52.83 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.842 Y52.659 E.00526 G3 X-4.071 Y51.789 I1.263 J.342 E.03699 G3 X-3.672 Y51.696 I.517 J1.314 E.01264 G3 X-4.887 Y53 I.094 J1.305 E.19245 G1 X-4.865 Y52.869 E.00408 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.842 Y52.659 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.672 Y51.696 G1 X-3.494 Y51.699 ;WIPE_END G1 X-11.12 Y51.994 Z17.4 F30000 G1 X-15.5 Y52.163 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X-15.426 Y52.336 E.00624 G3 X-17.903 Y51.488 I-1.612 J.667 E.26532 G3 X-17.161 Y51.262 I.851 J1.467 E.02596 G3 X-15.526 Y52.132 I.123 J1.74 E.06474 G1 X-15.526 Y52.132 E.00002 G1 X-15.89 Y52.358 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.774 Y52.663 E.01003 G3 X-17.531 Y51.789 I-1.264 J.338 E.18449 G3 X-17.132 Y51.696 I.517 J1.314 E.01264 G3 X-15.915 Y52.329 I.094 J1.305 E.04437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.155 Y53.972 G1 X-16.315 Y54.091 ;WIPE_END G1 X-8.761 Y52.999 Z17.4 F30000 G1 X-5.91 Y52.587 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X-5.744 Y52.099 E.01708 G3 X-5.608 Y54.177 I2.172 J.901 E.41851 G1 X-5.744 Y53.901 E.01021 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.169 J-.901 E.42826 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.671 J.79 E.48851 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48851 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299787 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.33572 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350967 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366224 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335726 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297822 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z17.4 F30000 G1 Z17 G1 E.8 F1800 ;WIDTH:0.357048 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335722 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299787 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.758 J-1.453 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297822 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335724 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366218 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z17.4 F30000 G1 X-39.352 Y-10.052 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.757 E.78634 G1 X-39.352 Y-33.757 E.01313 G1 X-39.352 Y-10.092 E.78502 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12541 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-34.164 E.81335 G1 X-38.945 Y-34.164 E.04014 G1 X-38.945 Y-9.685 E.81202 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-34.599 E.78014 G1 X-38.51 Y-34.599 E.06391 G1 X-38.51 Y-9.25 E.77891 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z17.4 F30000 G1 X-39.352 Y-47.948 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X-39.352 Y-38.243 E.32194 G1 X-39.748 Y-38.243 E.01313 G1 X-39.748 Y-47.948 E.32194 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12541 G1 X-38.945 Y-37.836 E.34894 G1 X-40.155 Y-37.836 E.04014 G1 X-40.155 Y-48.355 E.34894 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-37.401 E.34996 G1 X-40.59 Y-37.401 E.06391 G1 X-40.59 Y-48.79 E.34996 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.603 Y-49.69 Z17.4 F30000 G1 X-51.352 Y-52.052 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12541 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12541 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:17.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;17.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G3 X50.156 Y-1.727 I.004 J1.755 E.00517 G3 X48.39 Y-.667 I-.162 J1.731 E.28919 G3 X49.96 Y-1.733 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12429 G3 X50.196 Y-2.133 I.001 J2.147 E.0065 G1 X50.42 Y-2.111 E.00747 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.238 Y-2.566 E.00724 G1 X50.505 Y-2.539 E.00824 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.964 Y-2.585 E.01449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.238 Y-2.566 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X49.868 Y1.336 Z17.6 F30000 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12429 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.873 Y-.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12429 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.912 Y-.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12429 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12429 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END G1 X47.745 Y-6.292 Z17.6 F30000 G1 X30.752 Y-52.052 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12429 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z17.6 F30000 G1 X18.752 Y-47.948 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.541 E.31204 G1 X18.752 Y-38.541 E.01313 G1 X18.752 Y-47.908 E.31072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12429 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.134 E.33905 G1 X18.345 Y-38.134 E.04014 G1 X18.345 Y-48.315 E.33772 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-37.699 E.3408 G1 X17.91 Y-37.699 E.06391 G1 X17.91 Y-48.75 E.33957 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z17.6 F30000 G1 X18.752 Y-10.052 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X18.752 Y-33.459 E.77645 G1 X19.148 Y-33.459 E.01313 G1 X19.148 Y-10.052 E.77645 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12429 G1 X18.345 Y-33.866 E.80346 G1 X19.555 Y-33.866 E.04014 G1 X19.555 Y-9.645 E.80346 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-34.301 E.77098 G1 X19.99 Y-34.301 E.06391 G1 X19.99 Y-9.21 E.77098 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z17.6 F30000 G1 X-2.945 Y22.045 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z17.6 F30000 G1 X-5.297 Y52.75 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X-5.261 Y52.547 E.00684 G3 X-4.443 Y51.488 I1.683 J.455 E.04557 G3 X-3.697 Y51.262 I.851 J1.467 E.02608 G3 X-5.309 Y52.788 I.119 J1.74 E.28365 G1 X-4.858 Y52.828 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.842 Y52.659 E.00522 G3 X-4.071 Y51.789 I1.263 J.342 E.03699 G3 X-3.669 Y51.696 I.516 J1.311 E.01275 G3 X-4.887 Y53 I.09 J1.306 E.19234 G1 X-4.865 Y52.868 E.00412 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.842 Y52.659 G1 X-4.781 Y52.499 G1 X-4.61 Y52.202 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.669 Y51.696 G1 X-3.492 Y51.699 ;WIPE_END G1 X-11.119 Y51.992 Z17.6 F30000 G1 X-15.501 Y52.161 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X-15.426 Y52.336 E.00631 G3 X-17.903 Y51.488 I-1.612 J.667 E.26532 G3 X-17.157 Y51.262 I.851 J1.467 E.02608 G3 X-15.527 Y52.131 I.119 J1.74 E.06458 G1 X-15.89 Y52.357 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.775 Y52.664 E.01008 G3 X-17.531 Y51.789 I-1.264 J.338 E.18439 G3 X-17.129 Y51.696 I.516 J1.311 E.01275 G3 X-15.916 Y52.329 I.09 J1.305 E.04421 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.775 Y52.664 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.312 Y54.093 ;WIPE_END G1 X-8.758 Y52.999 Z17.6 F30000 G1 X-5.91 Y52.587 Z17.6 G1 Z17.2 G1 E.8 F1800 M73 P85 R12 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42872 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-19.49 Y54.305 I-2.671 J-.793 E.20243 G3 X-14.359 Y52.21 I2.459 J-1.309 E.28629 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299785 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350969 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387466 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366216 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335719 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297816 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.792 Y51.104 E.00436 G1 X-3.039 Y51.02 E.00426 G1 X-3.296 Y50.969 E.00426 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z17.6 F30000 G1 Z17.2 G1 E.8 F1800 ;WIDTH:0.357047 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335722 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299787 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297816 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335718 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366215 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z17.6 F30000 G1 X-39.352 Y-10.052 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.459 E.77645 G1 X-39.352 Y-33.459 E.01313 G1 X-39.352 Y-10.092 E.77512 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12429 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.866 E.80346 G1 X-38.945 Y-33.866 E.04014 G1 X-38.945 Y-9.685 E.80213 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-34.301 E.77098 G1 X-38.51 Y-34.301 E.06391 G1 X-38.51 Y-9.25 E.76975 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z17.6 F30000 G1 X-39.352 Y-47.948 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X-39.352 Y-38.541 E.31204 G1 X-39.748 Y-38.541 E.01313 G1 X-39.748 Y-47.948 E.31204 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12429 G1 X-38.945 Y-38.134 E.33905 G1 X-40.155 Y-38.134 E.04014 G1 X-40.155 Y-48.355 E.33905 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-37.699 E.3408 G1 X-40.59 Y-37.699 E.06391 G1 X-40.59 Y-48.79 E.3408 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.603 Y-49.69 Z17.6 F30000 G1 X-51.352 Y-52.052 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12429 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12429 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:17.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;17.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G3 X50.152 Y-1.728 I.004 J1.755 E.00506 G3 X48.39 Y-.667 I-.159 J1.731 E.2893 G3 X49.96 Y-1.734 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.141 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12202 G3 X50.192 Y-2.133 I.001 J2.147 E.00639 G1 X50.42 Y-2.111 E.00758 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.235 Y-2.566 E.00714 G1 X50.505 Y-2.539 E.00834 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.964 Y-2.585 E.01448 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.235 Y-2.566 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X49.868 Y-1.336 Z17.8 F30000 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12202 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.908 Y-1.335 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12202 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F12202 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12202 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.146 Y-.565 ;WIPE_END G1 X47.456 Y-7.707 Z17.8 F30000 G1 X30.752 Y-52.052 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12202 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z17.8 F30000 G1 X18.752 Y-47.948 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.779 E.30415 G1 X18.752 Y-38.779 E.01313 G1 X18.752 Y-47.908 E.30283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 M73 P85 R11 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12202 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.372 E.33116 G1 X18.345 Y-38.372 E.04014 G1 X18.345 Y-48.315 E.32983 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-37.937 E.33349 G1 X17.91 Y-37.937 E.06391 G1 X17.91 Y-48.75 E.33226 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z17.8 F30000 G1 X18.752 Y-10.052 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X18.752 Y-33.221 E.76856 G1 X19.148 Y-33.221 E.01313 G1 X19.148 Y-10.052 E.76856 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12202 G1 X18.345 Y-33.628 E.79557 G1 X19.555 Y-33.628 E.04014 G1 X19.555 Y-9.645 E.79557 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-34.063 E.76367 G1 X19.99 Y-34.063 E.06391 G1 X19.99 Y-9.21 E.76367 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z17.8 F30000 G1 X-2.945 Y22.045 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z17.8 F30000 G1 X-5.304 Y52.808 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X-5.307 Y52.771 E.00121 G3 X-4.443 Y51.488 I1.729 J.231 E.05318 G3 X-3.694 Y51.262 I.851 J1.468 E.0262 G3 X-5.322 Y53 I.116 J1.74 E.27657 G1 X-5.308 Y52.848 E.00508 G1 X-4.87 Y52.836 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.875 Y52.828 E.0003 G3 X-4.071 Y51.789 I1.297 J.173 E.04228 G3 X-3.665 Y51.696 I.515 J1.308 E.01286 G3 X-4.887 Y53 I.087 J1.305 E.19213 G1 X-4.874 Y52.876 E.00383 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.875 Y52.828 G1 X-4.836 Y52.661 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.665 Y51.696 G1 X-3.501 Y51.699 ;WIPE_END G1 X-11.128 Y51.991 Z17.8 F30000 G1 X-15.502 Y52.159 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X-15.427 Y52.336 E.00637 G3 X-17.903 Y51.488 I-1.612 J.666 E.26522 G3 X-17.154 Y51.262 I.851 J1.468 E.0262 G3 X-15.528 Y52.129 I.116 J1.74 E.06439 G1 X-15.891 Y52.355 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.774 Y52.664 E.01013 G3 X-17.531 Y51.789 I-1.264 J.338 E.18449 G3 X-17.125 Y51.696 I.515 J1.308 E.01286 G3 X-15.917 Y52.327 I.087 J1.306 E.04406 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.664 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.311 Y54.092 ;WIPE_END G1 X-8.757 Y52.999 Z17.8 F30000 G1 X-5.91 Y52.587 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42888 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42886 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-2.261 Y55.458 I2.671 J.79 E.33683 G3 X-6.241 Y53.79 I-1.314 J-2.448 E.15186 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299789 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335723 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350971 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387473 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.36623 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335734 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297829 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z17.8 F30000 G1 Z17.4 G1 E.8 F1800 ;WIDTH:0.357051 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335726 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.29979 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.561 Y54.98 E.00426 G1 X-17.808 Y54.896 E.00426 G1 X-18.049 Y54.778 E.00436 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297828 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335731 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366224 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z17.8 F30000 G1 X-39.352 Y-10.052 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.221 E.76856 G1 X-39.352 Y-33.221 E.01313 G1 X-39.352 Y-10.092 E.76723 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12202 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.628 E.79557 G1 X-38.945 Y-33.628 E.04014 G1 X-38.945 Y-9.685 E.79424 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-34.063 E.76367 G1 X-38.51 Y-34.063 E.06391 G1 X-38.51 Y-9.25 E.76244 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z17.8 F30000 G1 X-39.352 Y-47.948 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X-39.352 Y-38.779 E.30415 G1 X-39.748 Y-38.779 E.01313 G1 X-39.748 Y-47.948 E.30415 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12202 G1 X-38.945 Y-38.372 E.33116 G1 X-40.155 Y-38.372 E.04014 G1 X-40.155 Y-48.355 E.33116 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-37.937 E.33349 G1 X-40.59 Y-37.937 E.06391 G1 X-40.59 Y-48.79 E.33349 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.603 Y-49.69 Z17.8 F30000 G1 X-51.352 Y-52.052 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12202 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12202 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:17.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;17.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G3 X50.149 Y-1.728 I.005 J1.755 E.00495 G3 X48.39 Y-.667 I-.155 J1.731 E.28941 G3 X49.96 Y-1.734 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12104 G3 X50.189 Y-2.133 I.001 J2.147 E.00627 G1 X50.42 Y-2.111 E.0077 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.003 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.232 Y-2.566 E.00704 G1 X50.505 Y-2.539 E.00845 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.964 Y-2.585 E.01447 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.232 Y-2.566 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.873 ;WIPE_END G1 X50.373 Y-.455 Z18 F30000 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12104 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12104 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.834 Y.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12104 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12104 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.715 Y-.39 G1 X48.878 Y-.749 G1 X48.923 Y-.797 ;WIPE_END G1 X46.373 Y-7.991 Z18 F30000 G1 X30.752 Y-52.052 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12104 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z18 F30000 G1 X18.752 Y-47.948 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.943 E.29871 G1 X18.752 Y-38.943 E.01313 G1 X18.752 Y-47.908 E.29738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12104 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.536 E.32572 G1 X18.345 Y-38.536 E.04014 G1 X18.345 Y-48.315 E.32439 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.101 E.32844 G1 X17.91 Y-38.101 E.06391 G1 X17.91 Y-48.75 E.32722 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z18 F30000 G1 X18.752 Y-10.052 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X18.752 Y-33.057 E.76311 G1 X19.148 Y-33.057 E.01313 G1 X19.148 Y-10.052 E.76311 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12104 G1 X18.345 Y-33.464 E.79012 G1 X19.555 Y-33.464 E.04014 G1 X19.555 Y-9.645 E.79012 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-33.899 E.75863 G1 X19.99 Y-33.899 E.06391 G1 X19.99 Y-9.21 E.75863 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z18 F30000 G1 X-2.945 Y22.045 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z18 F30000 G1 X-5.296 Y52.745 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X-5.262 Y52.547 E.00668 G3 X-4.443 Y51.488 I1.684 J.455 E.04557 G3 X-3.69 Y51.261 I.851 J1.468 E.02632 G3 X-5.308 Y52.783 I.112 J1.741 E.28368 G1 X-4.857 Y52.824 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.842 Y52.659 E.00508 G3 X-4.071 Y51.789 I1.263 J.342 E.03699 G3 X-3.662 Y51.696 I.514 J1.306 E.01297 G3 X-4.887 Y53 I.083 J1.306 E.19212 G1 X-4.864 Y52.863 E.00427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.842 Y52.659 G1 X-4.781 Y52.499 G1 X-4.61 Y52.202 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.662 Y51.696 G1 X-3.488 Y51.699 ;WIPE_END G1 X-11.115 Y51.99 Z18 F30000 G1 X-15.502 Y52.157 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X-15.426 Y52.336 E.00643 G3 X-17.903 Y51.488 I-1.612 J.667 E.26532 G3 X-17.15 Y51.261 I.851 J1.468 E.02632 G3 X-15.529 Y52.128 I.112 J1.741 E.06422 G1 X-15.892 Y52.353 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.775 Y52.664 E.01019 G3 X-17.531 Y51.789 I-1.264 J.338 E.18439 G3 X-17.122 Y51.696 I.514 J1.306 E.01297 G3 X-15.918 Y52.327 I.083 J1.306 E.04392 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.775 Y52.664 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.31 Y54.092 ;WIPE_END G1 X-8.756 Y52.999 Z18 F30000 G1 X-5.91 Y52.587 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42888 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.671 J.79 E.48854 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48854 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.33572 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350968 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387471 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.36623 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335734 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297827 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z18 F30000 G1 Z17.6 G1 E.8 F1800 ;WIDTH:0.357047 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335722 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299786 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.758 J-1.453 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297815 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335717 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366213 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z18 F30000 G1 X-39.352 Y-10.052 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.057 E.76311 G1 X-39.352 Y-33.057 E.01313 G1 X-39.352 Y-10.092 E.76179 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12104 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.464 E.79012 G1 X-38.945 Y-33.464 E.04014 G1 X-38.945 Y-9.685 E.78879 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.899 E.75863 G1 X-38.51 Y-33.899 E.06391 G1 X-38.51 Y-9.25 E.7574 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z18 F30000 G1 X-39.352 Y-47.948 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X-39.352 Y-38.943 E.29871 G1 X-39.748 Y-38.943 E.01313 G1 X-39.748 Y-47.948 E.29871 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12104 G1 X-38.945 Y-38.536 E.32572 G1 X-40.155 Y-38.536 E.04014 G1 X-40.155 Y-48.355 E.32572 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-38.101 E.32844 G1 X-40.59 Y-38.101 E.06391 G1 X-40.59 Y-48.79 E.32844 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.602 Y-49.69 Z18 F30000 G1 X-51.352 Y-52.052 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12104 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12104 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:17.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;17.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G3 X50.146 Y-1.728 I.005 J1.755 E.00484 G3 X48.39 Y-.667 I-.152 J1.732 E.28953 G3 X49.96 Y-1.734 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12087 G3 X50.186 Y-2.134 I.001 J2.147 E.00616 G1 X50.42 Y-2.111 E.00781 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25035 G1 X50.003 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.228 Y-2.567 E.00695 G1 X50.505 Y-2.539 E.00855 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.963 Y-2.585 E.01446 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.228 Y-2.567 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.779 Y-1.873 ;WIPE_END G1 X49.829 Y-.563 Z18.2 F30000 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12087 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F12087 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12087 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.868 Y1.336 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12087 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.662 Y-.064 ;WIPE_END G1 X46.176 Y-7.281 Z18.2 F30000 G1 X30.752 Y-52.052 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12087 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z18.2 F30000 G1 X18.752 Y-47.948 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.094 E.29371 G1 X18.752 Y-39.094 E.01313 G1 X18.752 Y-47.908 E.29239 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12087 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.687 E.32072 G1 X18.345 Y-38.687 E.04014 G1 X18.345 Y-48.315 E.31939 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.252 E.32382 G1 X17.91 Y-38.252 E.06391 G1 X17.91 Y-48.75 E.32259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z18.2 F30000 G1 X18.752 Y-10.052 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X18.752 Y-32.906 E.75812 G1 X19.148 Y-32.906 E.01313 G1 X19.148 Y-10.052 E.75812 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12087 G1 X18.345 Y-33.313 E.78513 G1 X19.555 Y-33.313 E.04014 G1 X19.555 Y-9.645 E.78513 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-33.748 E.754 G1 X19.99 Y-33.748 E.06391 G1 X19.99 Y-9.21 E.754 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z18.2 F30000 G1 X-2.945 Y22.045 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z18.2 F30000 G1 X-5.296 Y52.746 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X-5.262 Y52.547 E.0067 G3 X-4.443 Y51.488 I1.684 J.455 E.04557 G3 X-3.686 Y51.261 I.851 J1.468 E.02644 G3 X-5.308 Y52.783 I.108 J1.741 E.28354 G1 X-4.875 Y52.828 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-4.071 Y51.789 I1.297 J.173 E.04228 G3 X-3.658 Y51.695 I.514 J1.305 E.01308 G3 X-4.88 Y52.868 I.079 J1.306 E.19598 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.781 Y52.499 G1 X-4.61 Y52.202 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.658 Y51.695 G1 X-3.493 Y51.699 ;WIPE_END G1 X-11.12 Y51.989 Z18.2 F30000 G1 X-15.503 Y52.156 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X-15.426 Y52.336 E.00649 G3 X-17.903 Y51.488 I-1.612 J.666 E.26532 G3 X-17.146 Y51.261 I.851 J1.468 E.02644 G3 X-15.53 Y52.126 I.108 J1.741 E.06404 G1 X-15.892 Y52.352 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.774 Y52.663 E.01024 G3 X-17.531 Y51.789 I-1.264 J.338 E.18449 G3 X-17.118 Y51.695 I.514 J1.305 E.01308 G3 X-15.918 Y52.325 I.08 J1.306 E.04377 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.309 Y54.091 ;WIPE_END G1 X-8.755 Y52.998 Z18.2 F30000 G1 X-5.91 Y52.587 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.4289 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.1332 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.671 J.79 E.48855 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299784 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335719 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350966 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387462 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366212 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335712 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297809 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-14.904 Y53 Z18.2 F30000 G1 Z17.8 G1 E.8 F1800 ;WIDTH:0.357043 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335719 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299784 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242552 G3 X-15.134 Y53.778 I-5.76 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297805 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335707 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366204 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-13.367 Y49.162 Z18.2 F30000 G1 X-39.352 Y-10.052 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.906 E.75812 G1 X-39.352 Y-32.906 E.01313 G1 X-39.352 Y-10.092 E.75679 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12087 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.313 E.78513 G1 X-38.945 Y-33.313 E.04014 G1 X-38.945 Y-9.685 E.7838 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.748 E.754 G1 X-38.51 Y-33.748 E.06391 G1 X-38.51 Y-9.25 E.75277 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z18.2 F30000 G1 X-39.352 Y-47.948 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X-39.352 Y-39.094 E.29371 G1 X-39.748 Y-39.094 E.01313 G1 X-39.748 Y-47.948 E.29371 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12087 G1 X-38.945 Y-38.687 E.32072 G1 X-40.155 Y-38.687 E.04014 G1 X-40.155 Y-48.355 E.32072 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-38.252 E.32382 G1 X-40.59 Y-38.252 E.06391 G1 X-40.59 Y-48.79 E.32382 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.602 Y-49.69 Z18.2 F30000 G1 X-51.352 Y-52.052 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12087 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12087 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:18 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;18 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;18 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.4 I-.529 J1.096 P1 F30000 M73 P86 R11 G1 X50 Y-1.734 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G3 X50.142 Y-1.729 I.005 J1.756 E.00472 G3 X48.39 Y-.667 I-.148 J1.732 E.28964 G3 X49.96 Y-1.734 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11991 G3 X50.182 Y-2.134 I.001 J2.147 E.00605 G1 X50.42 Y-2.111 E.00792 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25036 G1 X50.002 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X50.225 Y-2.567 E.00686 G1 X50.505 Y-2.539 E.00865 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.963 Y-2.585 E.01444 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.225 Y-2.567 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.779 Y-1.873 ;WIPE_END G1 X50.633 Y1.184 Z18.4 F30000 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11991 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F11991 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11991 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11991 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END G1 X47.745 Y-6.292 Z18.4 F30000 G1 X30.752 Y-52.052 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11991 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z18.4 F30000 G1 X18.752 Y-47.948 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.201 E.29017 G1 X18.752 Y-39.201 E.01313 G1 X18.752 Y-47.908 E.28884 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11991 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.793 E.31717 G1 X18.345 Y-38.793 E.04014 G1 X18.345 Y-48.315 E.31585 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.358 E.32053 G1 X17.91 Y-38.358 E.06391 G1 X17.91 Y-48.75 E.3193 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z18.4 F30000 G1 X18.752 Y-10.052 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X18.752 Y-32.799 E.75457 G1 X19.148 Y-32.799 E.01313 G1 X19.148 Y-10.052 E.75457 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11991 G1 X18.345 Y-33.207 E.78158 G1 X19.555 Y-33.207 E.04014 G1 X19.555 Y-9.645 E.78158 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X17.91 Y-33.642 E.75071 G1 X19.99 Y-33.642 E.06391 G1 X19.99 Y-9.21 E.75071 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z18.4 F30000 G1 X-2.945 Y22.045 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z18.4 F30000 G1 X-5.304 Y52.805 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X-5.307 Y52.771 E.00112 G3 X-4.443 Y51.488 I1.729 J.231 E.05318 G3 X-3.683 Y51.261 I.852 J1.469 E.02656 G3 X-5.322 Y53 I.105 J1.741 E.27622 G1 X-5.307 Y52.845 E.00517 G1 X-4.87 Y52.833 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X-4.876 Y52.828 E.00025 G3 X-4.071 Y51.789 I1.297 J.174 E.04229 G3 X-3.654 Y51.695 I.514 J1.304 E.01319 G3 X-4.887 Y53 I.076 J1.307 E.1919 G1 X-4.874 Y52.873 E.00392 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.876 Y52.828 G1 X-4.836 Y52.661 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.654 Y51.695 G1 X-3.498 Y51.699 ;WIPE_END G1 X-11.127 Y51.952 Z18.4 F30000 G1 X-15.536 Y52.099 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X-15.526 Y52.132 E.00114 G3 X-17.903 Y51.488 I-1.512 J.87 E.27286 G3 X-17.143 Y51.261 I.852 J1.469 E.02656 G3 X-15.652 Y51.943 I.105 J1.741 E.0566 G1 X-15.56 Y52.067 E.00513 G1 X-15.893 Y52.35 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X-15.774 Y52.663 E.0103 G3 X-17.531 Y51.789 I-1.264 J.338 E.18449 G3 X-17.114 Y51.695 I.514 J1.304 E.01319 G3 X-15.918 Y52.324 I.076 J1.307 E.04364 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.774 Y52.663 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.819 Y53.501 G1 X-15.943 Y53.727 G1 X-16.103 Y53.927 G1 X-16.232 Y54.04 G1 X-16.308 Y54.09 ;WIPE_END G1 X-8.754 Y52.998 Z18.4 F30000 G1 X-5.91 Y52.587 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42874 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42888 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G3 X-6.241 Y53.79 I2.67 J.79 E.48843 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.547 Y52.461 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F11991 G1 X-5.552 Y52.476 E.00026 G2 X-5.622 Y52.738 I3.961 J1.194 E.00441 ;WIDTH:0.299785 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335719 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350967 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387471 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366228 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335734 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.29783 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G1 X-5.552 Y53.524 E.00416 G2 X-5.461 Y52.21 I1.98 J-.524 E.18749 G1 X-5.534 Y52.423 E.00366 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F11991 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z18.4 F30000 G1 Z18 G1 E.8 F1800 ;WIDTH:0.357049 G1 F11991 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335722 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299785 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.048 Y53.524 I-4.021 J-.929 E.00441 G3 X-15.048 Y52.476 I-1.98 J-.524 E.19206 G1 X-14.982 Y52.723 E.00416 ;WIDTH:0.29783 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335735 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366227 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z18.4 F30000 G1 X-39.352 Y-10.052 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.799 E.75457 G1 X-39.352 Y-32.799 E.01313 G1 X-39.352 Y-10.092 E.75325 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11991 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.207 E.78158 G1 X-38.945 Y-33.207 E.04014 G1 X-38.945 Y-9.685 E.78025 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.642 E.75071 G1 X-38.51 Y-33.642 E.06391 G1 X-38.51 Y-9.25 E.74948 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z18.4 F30000 G1 X-39.352 Y-47.948 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X-39.352 Y-39.201 E.29017 G1 X-39.748 Y-39.201 E.01313 G1 X-39.748 Y-47.948 E.29017 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11991 G1 X-38.945 Y-38.793 E.31717 G1 X-40.155 Y-38.793 E.04014 G1 X-40.155 Y-48.355 E.31717 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X-38.51 Y-38.358 E.32053 G1 X-40.59 Y-38.358 E.06391 G1 X-40.59 Y-48.79 E.32053 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.602 Y-49.69 Z18.4 F30000 G1 X-51.352 Y-52.052 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11991 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11991 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11991 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:18.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;18.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.6 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G3 X50.139 Y-1.729 I.005 J1.756 E.00461 G3 X48.39 Y-.667 I-.145 J1.732 E.28976 G3 X49.96 Y-1.734 I1.615 J.688 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11955 G3 X50.179 Y-2.134 I.001 J2.147 E.00594 G1 X50.42 Y-2.111 E.00803 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25036 G1 X50.002 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X50.221 Y-2.567 E.00678 G1 X50.505 Y-2.539 E.00876 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.962 Y-2.585 E.01442 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.221 Y-2.567 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.778 Y-1.874 ;WIPE_END G1 X50.058 Y.585 Z18.6 F30000 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11955 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F11955 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11955 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.868 Y-1.336 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11955 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.908 Y-1.335 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X51.184 Y-.633 G1 X51.323 Y-.263 G1 X51.323 Y-.198 ;WIPE_END G1 X48.508 Y-7.292 Z18.6 F30000 G1 X30.752 Y-52.052 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11955 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z18.6 F30000 G1 X18.752 Y-47.948 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.301 E.28683 G1 X18.752 Y-39.301 E.01313 G1 X18.752 Y-47.908 E.28551 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11955 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.894 E.31384 G1 X18.345 Y-38.894 E.04014 G1 X18.345 Y-48.315 E.31252 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.459 E.31745 G1 X17.91 Y-38.459 E.06391 G1 X17.91 Y-48.75 E.31622 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z18.6 F30000 G1 X18.752 Y-10.052 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X18.752 Y-32.699 E.75124 G1 X19.148 Y-32.699 E.01313 G1 X19.148 Y-10.052 E.75124 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11955 G1 X18.345 Y-33.106 E.77825 G1 X19.555 Y-33.106 E.04014 G1 X19.555 Y-9.645 E.77825 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X17.91 Y-33.541 E.74763 G1 X19.99 Y-33.541 E.06391 G1 X19.99 Y-9.21 E.74763 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z18.6 F30000 G1 X-2.945 Y22.045 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.83 Y30.406 Z18.6 F30000 G1 X-5.304 Y52.804 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X-5.307 Y52.771 E.00109 G3 X-4.443 Y51.488 I1.729 J.231 E.05318 G3 X-3.679 Y51.261 I.852 J1.469 E.02668 G3 X-5.322 Y53 I.101 J1.741 E.2761 G1 X-5.307 Y52.844 E.00521 G1 X-4.869 Y52.832 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X-4.876 Y52.828 E.00023 G3 X-4.071 Y51.789 I1.297 J.174 E.04229 G3 X-3.651 Y51.695 I.514 J1.303 E.0133 G3 X-4.887 Y53 I.073 J1.307 E.19179 M73 P86 R10 G1 X-4.874 Y52.872 E.00395 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.876 Y52.828 G1 X-4.836 Y52.661 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.651 Y51.695 G1 X-3.497 Y51.698 ;WIPE_END G1 X-11.126 Y51.952 Z18.6 F30000 G1 X-15.537 Y52.098 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X-15.526 Y52.132 E.00117 G3 X-17.903 Y51.488 I-1.512 J.87 E.27286 G3 X-17.139 Y51.261 I.852 J1.469 E.02668 G3 X-15.652 Y51.943 I.101 J1.741 E.05649 G1 X-15.561 Y52.066 E.00509 G1 X-15.898 Y52.34 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X-15.903 Y52.35 E.00034 G3 X-17.531 Y51.789 I-1.135 J.652 E.19495 G3 X-17.111 Y51.695 I.514 J1.303 E.0133 G3 X-15.998 Y52.208 I.073 J1.307 E.03919 G1 X-15.923 Y52.308 E.00384 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.903 Y52.35 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.293 Y54.08 ;WIPE_END G1 X-8.738 Y52.994 Z18.6 F30000 G1 X-5.91 Y52.587 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42893 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.1332 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G3 X-6.241 Y53.79 I2.671 J.79 E.48858 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.671 J-.79 E.48858 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F11955 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299785 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350969 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387468 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366221 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297819 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.563 Y55.05 I2.089 J-.344 E.04791 G1 X-3.302 Y55.032 E.00426 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G1 X-1.676 Y53.784 E.00426 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y52.993 E.00447 G1 X-1.538 Y52.732 E.00426 G1 X-1.592 Y52.463 E.00447 G1 X-1.676 Y52.216 E.00426 G1 X-1.792 Y51.981 E.00426 G1 X-1.94 Y51.757 E.00436 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.95 E.00436 G1 X-3.838 Y50.968 E.00436 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F11955 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z18.6 F30000 G1 Z18.2 G1 E.8 F1800 ;WIDTH:0.357046 G1 F11955 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.33572 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299785 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.048 Y53.524 I-4.027 J-.931 E.00441 G3 X-15.048 Y52.476 I-1.982 J-.524 E.19227 G1 X-14.982 Y52.723 E.00416 ;WIDTH:0.297816 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335717 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366213 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z18.6 F30000 G1 X-39.352 Y-10.052 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.699 E.75124 G1 X-39.352 Y-32.699 E.01313 G1 X-39.352 Y-10.092 E.74991 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11955 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.106 E.77825 G1 X-38.945 Y-33.106 E.04014 G1 X-38.945 Y-9.685 E.77692 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.541 E.74763 G1 X-38.51 Y-33.541 E.06391 G1 X-38.51 Y-9.25 E.7464 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z18.6 F30000 G1 X-39.352 Y-47.948 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X-39.352 Y-39.301 E.28683 G1 X-39.748 Y-39.301 E.01313 G1 X-39.748 Y-47.948 E.28683 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11955 G1 X-38.945 Y-38.894 E.31384 G1 X-40.155 Y-38.894 E.04014 G1 X-40.155 Y-48.355 E.31384 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X-38.51 Y-38.459 E.31745 G1 X-40.59 Y-38.459 E.06391 G1 X-40.59 Y-48.79 E.31745 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.602 Y-49.69 Z18.6 F30000 G1 X-51.352 Y-52.052 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11955 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11955 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11955 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:18.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;18.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.8 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G3 X50.136 Y-1.729 I.005 J1.756 E.0045 G3 X48.39 Y-.667 I-.142 J1.733 E.28988 G3 X49.96 Y-1.734 I1.615 J.689 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11933 G3 X50.175 Y-2.135 I.001 J2.147 E.00583 G1 X50.42 Y-2.111 E.00815 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25036 G1 X50.001 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X50.218 Y-2.568 E.0067 G1 X50.505 Y-2.539 E.00886 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.961 Y-2.585 E.0144 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.218 Y-2.568 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.778 Y-1.874 ;WIPE_END G1 X49.829 Y-.563 Z18.8 F30000 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11933 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F11933 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11933 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.868 Y1.336 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11933 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.662 Y-.064 ;WIPE_END G1 X46.176 Y-7.281 Z18.8 F30000 G1 X30.752 Y-52.052 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11933 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z18.8 F30000 G1 X18.752 Y-47.948 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.362 E.28482 G1 X18.752 Y-39.362 E.01313 G1 X18.752 Y-47.908 E.2835 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11933 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.955 E.31183 G1 X18.345 Y-38.955 E.04014 G1 X18.345 Y-48.315 E.3105 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.52 E.31558 G1 X17.91 Y-38.52 E.06391 G1 X17.91 Y-48.75 E.31435 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z18.8 F30000 G1 X18.752 Y-10.052 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X18.752 Y-32.638 E.74923 G1 X19.148 Y-32.638 E.01313 G1 X19.148 Y-10.052 E.74923 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11933 G1 X18.345 Y-33.045 E.77624 G1 X19.555 Y-33.045 E.04014 G1 X19.555 Y-9.645 E.77624 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X17.91 Y-33.48 E.74576 G1 X19.99 Y-33.48 E.06391 G1 X19.99 Y-9.21 E.74576 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z18.8 F30000 G1 X-2.945 Y22.045 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z18.8 F30000 G1 X-5.295 Y52.741 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X-5.262 Y52.547 E.00655 G3 X-4.443 Y51.488 I1.684 J.455 E.04557 G3 X-3.676 Y51.261 I.852 J1.47 E.0268 G3 X-5.308 Y52.779 I.098 J1.742 E.28333 G1 X-4.86 Y52.818 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X-4.86 Y52.735 E.00256 G3 X-4.071 Y51.789 I1.281 J.267 E.03938 G3 X-3.647 Y51.695 I.514 J1.303 E.01341 G3 X-4.887 Y53 I.069 J1.307 E.19169 G1 X-4.866 Y52.858 E.00442 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.86 Y52.735 G1 X-4.781 Y52.499 G1 X-4.653 Y52.267 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.647 Y51.695 G1 X-3.483 Y51.699 ;WIPE_END G1 X-11.111 Y51.951 Z18.8 F30000 G1 X-15.537 Y52.097 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X-15.527 Y52.132 E.0012 G3 X-17.903 Y51.488 I-1.511 J.869 E.27265 G3 X-17.136 Y51.261 I.852 J1.47 E.0268 G3 X-15.653 Y51.943 I.098 J1.74 E.05636 G1 X-15.561 Y52.065 E.00507 G1 X-15.899 Y52.339 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X-15.903 Y52.35 E.00035 G3 X-17.531 Y51.789 I-1.135 J.652 E.19495 G3 X-17.107 Y51.695 I.514 J1.303 E.01341 G3 X-15.998 Y52.208 I.069 J1.307 E.03909 G1 X-15.923 Y52.307 E.00382 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.903 Y52.35 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.292 Y54.079 ;WIPE_END G1 X-8.737 Y52.993 Z18.8 F30000 G1 X-5.91 Y52.587 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.172 J.901 E.42873 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.13319 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42892 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-19.479 Y54.327 I-2.672 J-.793 E.20171 G3 X-14.359 Y52.21 I2.45 J-1.325 E.28665 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242555 G1 F11933 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299792 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335725 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350972 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387515 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366327 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335854 G1 X-5.653 Y53.107 E.00122 ;WIDTH:0.297938 G1 X-5.618 Y53.277 E.00362 ;WIDTH:0.242555 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F11933 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z18.8 F30000 G1 Z18.4 G1 E.8 F1800 ;WIDTH:0.357067 G1 F11933 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335726 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.29979 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242555 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.808 Y51.104 E.00436 G1 X-17.561 Y51.02 E.00426 G1 X-17.304 Y50.969 E.00426 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297937 G1 X-14.947 Y52.893 E.00361 ;WIDTH:0.33585 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.36632 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z18.8 F30000 G1 X-39.352 Y-10.052 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.638 E.74923 G1 X-39.352 Y-32.638 E.01313 G1 X-39.352 Y-10.092 E.7479 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11933 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.045 E.77624 G1 X-38.945 Y-33.045 E.04014 G1 X-38.945 Y-9.685 E.77491 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.48 E.74576 G1 X-38.51 Y-33.48 E.06391 G1 X-38.51 Y-9.25 E.74453 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z18.8 F30000 G1 X-39.352 Y-47.948 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X-39.352 Y-39.362 E.28482 G1 X-39.748 Y-39.362 E.01313 G1 X-39.748 Y-47.948 E.28482 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11933 G1 X-38.945 Y-38.955 E.31183 G1 X-40.155 Y-38.955 E.04014 G1 X-40.155 Y-48.355 E.31183 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X-38.51 Y-38.52 E.31558 G1 X-40.59 Y-38.52 E.06391 G1 X-40.59 Y-48.79 E.31558 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.602 Y-49.69 Z18.8 F30000 G1 X-51.352 Y-52.052 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11933 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11933 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11933 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:18.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;18.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G3 X50.132 Y-1.73 I.005 J1.756 E.00439 G3 X48.39 Y-.667 I-.138 J1.733 E.29 G3 X49.96 Y-1.734 I1.616 J.689 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11919 G3 X50.172 Y-2.135 I.001 J2.147 E.00571 G1 X50.42 Y-2.111 E.00826 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.141 I-.822 J-1.983 E.25037 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X50.215 Y-2.568 E.00663 G1 X50.505 Y-2.539 E.00897 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.215 Y-2.568 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X49.148 Y-1.038 Z19 F30000 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11919 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11919 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.873 Y-.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F11919 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.912 Y-.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11919 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.146 Y-.565 ;WIPE_END G1 X47.456 Y-7.707 Z19 F30000 G1 X30.752 Y-52.052 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11919 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X23.035 Y-49.962 Z19 F30000 G1 X18.752 Y-47.948 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.422 E.28281 G1 X18.752 Y-39.422 E.01313 G1 X18.752 Y-47.908 E.28148 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11919 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-39.015 E.30982 G1 X18.345 Y-39.015 E.04014 G1 X18.345 Y-48.315 E.30849 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.58 E.31372 G1 X17.91 Y-38.58 E.06391 G1 X17.91 Y-48.75 E.31249 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z19 F30000 G1 X18.752 Y-10.052 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X18.752 Y-32.578 E.74722 G1 X19.148 Y-32.578 E.01313 G1 X19.148 Y-10.052 E.74722 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11919 G1 X18.345 Y-32.985 E.77422 G1 X19.555 Y-32.985 E.04014 G1 X19.555 Y-9.645 E.77422 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X17.91 Y-33.42 E.7439 G1 X19.99 Y-33.42 E.06391 G1 X19.99 Y-9.21 E.7439 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z19 F30000 G1 X-2.945 Y22.045 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P87 R10 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z19 F30000 G1 X-5.295 Y52.74 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X-5.261 Y52.547 E.0065 G3 X-4.443 Y51.488 I1.683 J.455 E.04557 G3 X-3.672 Y51.26 I.852 J1.47 E.02692 G3 X-5.307 Y52.778 I.094 J1.741 E.28315 G1 X-4.875 Y52.828 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G3 X-4.071 Y51.789 I1.297 J.173 E.04228 G3 X-3.644 Y51.694 I.514 J1.304 E.01352 G3 X-4.88 Y52.868 I.066 J1.307 E.19566 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.781 Y52.499 G1 X-4.705 Y52.345 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.644 Y51.694 G1 X-3.493 Y51.698 ;WIPE_END G1 X-11.121 Y51.951 Z19 F30000 G1 X-15.537 Y52.097 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X-15.526 Y52.132 E.00121 G3 X-17.903 Y51.488 I-1.512 J.87 E.27286 G3 X-17.132 Y51.26 I.852 J1.47 E.02692 G3 X-15.652 Y51.943 I.094 J1.742 E.05625 G1 X-15.561 Y52.065 E.00505 G1 X-15.899 Y52.339 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X-15.904 Y52.35 E.00036 G3 X-17.531 Y51.789 I-1.135 J.651 E.19484 G3 X-17.104 Y51.694 I.514 J1.304 E.01352 G3 X-15.998 Y52.208 I.065 J1.307 E.03898 G1 X-15.923 Y52.307 E.0038 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.904 Y52.35 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.292 Y54.079 ;WIPE_END G1 X-8.737 Y52.993 Z19 F30000 G1 X-5.91 Y52.587 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.4289 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.17 J-.901 E.42845 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.668 J-.79 E.48798 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F11919 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.33572 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350967 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366226 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335728 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297822 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.563 Y55.05 I2.089 J-.345 E.04791 G1 X-3.302 Y55.032 E.00426 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G1 X-1.676 Y53.784 E.00426 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y52.993 E.00447 G1 X-1.561 Y52.613 E.00623 G1 X-1.59 Y52.469 E.00237 G1 X-1.674 Y52.222 E.00426 G1 X-1.795 Y51.975 E.00447 G1 X-1.94 Y51.757 E.00426 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.95 E.00436 G1 X-3.838 Y50.968 E.00436 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F11919 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z19 F30000 G1 Z18.6 G1 E.8 F1800 ;WIDTH:0.357047 G1 F11919 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335721 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299785 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.048 Y53.524 I-4.027 J-.931 E.00441 G3 X-15.048 Y52.476 I-1.982 J-.524 E.19226 G1 X-14.982 Y52.723 E.00416 ;WIDTH:0.297825 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335726 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366219 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-13.631 Y42.981 Z19 F30000 G1 X-39.352 Y-10.052 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.578 E.74722 G1 X-39.352 Y-32.578 E.01313 G1 X-39.352 Y-10.092 E.74589 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11919 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-32.985 E.77422 G1 X-38.945 Y-32.985 E.04014 G1 X-38.945 Y-9.685 E.7729 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.42 E.7439 G1 X-38.51 Y-33.42 E.06391 G1 X-38.51 Y-9.25 E.74267 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z19 F30000 G1 X-39.352 Y-47.948 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X-39.352 Y-39.422 E.28281 G1 X-39.748 Y-39.422 E.01313 G1 X-39.748 Y-47.948 E.28281 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11919 G1 X-38.945 Y-39.015 E.30982 G1 X-40.155 Y-39.015 E.04014 G1 X-40.155 Y-48.355 E.30982 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X-38.51 Y-38.58 E.31372 G1 X-40.59 Y-38.58 E.06391 G1 X-40.59 Y-48.79 E.31372 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.602 Y-49.69 Z19 F30000 G1 X-51.352 Y-52.052 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11919 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11919 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11919 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:18.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;18.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.734 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G3 X50.129 Y-1.73 I.006 J1.757 E.00428 G3 X48.39 Y-.667 I-.135 J1.733 E.29011 G3 X49.96 Y-1.734 I1.616 J.689 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X50.169 Y-2.135 E.00562 G1 X50.42 Y-2.111 E.00837 G3 X49.96 Y-2.151 I-.419 J2.105 E.43209 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.211 Y-2.568 E.00653 G1 X50.505 Y-2.539 E.00907 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.96 Y-2.585 E.01437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.211 Y-2.568 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.777 Y-1.875 ;WIPE_END G1 X50.058 Y.585 Z19.2 F30000 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F12931 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F12931 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F12931 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.222 Y-.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F12931 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X44.314 Y-4.597 Z19.2 F30000 G1 X-51.352 Y-57.555 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-51.748 Y-57.555 E.01313 G1 X-51.748 Y-59.948 E.07938 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-57.595 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.148 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X-52.155 Y-57.148 E.04014 G1 X-52.155 Y-60.355 E.10639 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.188 E.10506 G1 X-50.51 Y-56.713 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-56.713 E.06391 G1 X-52.59 Y-60.79 E.12528 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-56.753 E.12405 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-56.714 ;WIPE_END G1 X-51.352 Y-54.445 Z19.2 F30000 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-51.352 Y-52.052 E.07938 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-54.445 E.07938 G1 X-51.392 Y-54.445 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.852 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X-50.945 Y-51.645 E.10639 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.852 E.10639 G1 X-50.985 Y-54.852 E.03881 G1 X-50.51 Y-55.287 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-50.51 Y-51.21 E.12528 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-55.287 E.12528 G1 X-50.55 Y-55.287 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.53 Y-53.287 ;WIPE_END G1 X-43.643 Y-49.998 Z19.2 F30000 G1 X-39.352 Y-47.948 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-39.352 Y-39.448 E.28197 G1 X-39.748 Y-39.448 E.01313 G1 X-39.748 Y-47.948 E.28197 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X-38.945 Y-39.04 E.30898 G1 X-40.155 Y-39.04 E.04014 G1 X-40.155 Y-48.355 E.30898 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-38.605 E.31294 G1 X-40.59 Y-38.605 E.06391 G1 X-40.59 Y-48.79 E.31294 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-38.71 Y-39.159 Z19.2 F30000 G1 X-39.352 Y-10.052 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.552 E.74638 G1 X-39.352 Y-32.552 E.01313 G1 X-39.352 Y-10.092 E.74505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-32.96 E.77339 G1 X-38.945 Y-32.96 E.04014 G1 X-38.945 Y-9.685 E.77206 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.395 E.74312 G1 X-38.51 Y-33.395 E.06391 G1 X-38.51 Y-9.25 E.74189 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-36.738 Y-2.576 Z19.2 F30000 G1 X-5.289 Y52.756 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-5.285 Y52.643 E.00374 G3 X-4.443 Y51.488 I1.707 J.359 E.04885 G3 X-3.669 Y51.26 I.853 J1.471 E.02704 G3 X-5.322 Y53 I.091 J1.742 E.27576 G1 X-5.294 Y52.795 E.00685 G1 X-4.866 Y52.812 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.841 Y52.66 E.00474 G3 X-4.071 Y51.789 I1.263 J.341 E.03698 G3 X-3.64 Y51.694 I.514 J1.305 E.01363 G3 X-4.877 Y52.849 I.062 J1.306 E.19592 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.66 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.64 Y51.694 G1 X-3.475 Y51.699 ;WIPE_END G1 X-11.104 Y51.951 Z19.2 F30000 G1 X-15.538 Y52.097 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-15.526 Y52.132 E.00122 G3 X-17.903 Y51.488 I-1.512 J.87 E.27286 G3 X-17.129 Y51.26 I.853 J1.471 E.02704 G3 X-15.652 Y51.943 I.091 J1.742 E.05614 G1 X-15.561 Y52.065 E.00505 G1 X-15.899 Y52.339 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.903 Y52.349 E.00035 G3 X-17.531 Y51.789 I-1.135 J.652 E.19496 G3 X-17.1 Y51.694 I.514 J1.305 E.01363 G3 X-15.997 Y52.208 I.062 J1.307 E.03887 G1 X-15.923 Y52.307 E.0038 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.903 Y52.349 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.72 Y53 G1 X-15.75 Y53.27 G1 X-15.819 Y53.501 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.291 Y54.079 ;WIPE_END G1 X-8.736 Y52.993 Z19.2 F30000 G1 X-5.91 Y52.587 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42892 G1 X-5.93 Y53.355 E.01912 G1 X-9.945 Y53.355 E.13319 G1 X-9.945 Y58.355 E.16586 G1 X-10.655 Y58.355 E.02355 G1 X-10.655 Y53.355 E.16586 G1 X-14.67 Y53.355 E.1332 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-10.655 Y52.645 E.13319 G1 X-10.655 Y47.645 E.16586 G1 X-9.945 Y47.645 E.02355 G1 X-9.945 Y52.645 E.16586 G1 X-5.93 Y52.645 E.13319 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-6.241 Y53.79 I2.67 J.79 E.4884 G1 X-9.51 Y53.79 E.10043 G1 X-9.51 Y58.79 E.15364 G1 X-11.09 Y58.79 E.04855 G1 X-11.09 Y53.79 E.15364 G1 X-14.359 Y53.79 E.10043 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48866 G1 X-11.09 Y52.21 E.10043 G1 X-11.09 Y47.21 E.15364 G1 X-9.51 Y47.21 E.04855 G1 X-9.51 Y52.21 E.15364 G1 X-6.281 Y52.21 E.09921 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350969 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366223 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335727 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297824 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346314 G1 F12000 G1 X-10.149 Y53 E.11009 ;WIDTH:0.366755 G1 X-10.199 Y53 E.00133 ;WIDTH:0.40858 G1 X-10.25 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y53.05 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y53.101 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y58.151 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y56.151 ;WIPE_END G1 X-14.904 Y53 Z19.2 F30000 G1 Z18.8 G1 E.8 F1800 ;WIDTH:0.357048 G1 F12000 G2 X-14.929 Y53.059 I.177 J.109 E.00164 ;WIDTH:0.335722 G1 X-14.948 Y53.107 E.00122 ;WIDTH:0.299787 G1 X-14.978 Y53.262 E.00332 ;WIDTH:0.242553 G3 X-15.134 Y53.778 I-5.759 J-1.454 E.00877 G1 X-15.255 Y54.025 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-16.246 Y54.894 E.00436 G1 X-16.499 Y54.98 E.00436 G1 X-16.769 Y55.033 E.00447 G1 X-17.03 Y55.05 E.00426 G1 X-17.304 Y55.031 E.00447 G1 X-17.567 Y54.978 E.00436 G1 X-17.814 Y54.894 E.00426 G1 X-18.049 Y54.778 E.00426 G1 X-18.278 Y54.626 E.00447 G1 X-18.479 Y54.449 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.01 Y52.469 E.00436 G1 X-18.924 Y52.216 E.00436 G1 X-18.802 Y51.97 E.00447 G1 X-18.656 Y51.752 E.00426 G1 X-18.479 Y51.551 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.049 Y51.222 E.00447 G1 X-17.814 Y51.106 E.00426 G1 X-17.567 Y51.022 E.00426 G1 X-17.304 Y50.969 E.00436 G1 X-17.03 Y50.95 E.00447 G1 X-16.769 Y50.967 E.00426 G3 X-14.982 Y52.723 I-.303 J2.096 E.0436 ;WIDTH:0.297819 G1 X-14.948 Y52.893 E.00361 ;WIDTH:0.335722 G1 X-14.929 Y52.941 E.00122 ;WIDTH:0.366217 G1 X-14.911 Y52.989 E.00135 ;WIDTH:0.346659 G1 X-10.401 Y53 E.11162 ;WIDTH:0.40858 G1 X-10.35 Y53 E.0015 ;WIDTH:0.450404 G1 X-10.3 Y53 E.00168 G1 X-10.3 Y52.95 E.00168 ;WIDTH:0.40858 G1 X-10.3 Y52.899 E.0015 ;WIDTH:0.34626 G1 X-10.3 Y47.849 E.12484 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-10.3 Y49.849 ;WIPE_END G1 X-8.348 Y42.47 Z19.2 F30000 G1 X-2.945 Y22.045 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X.929 Y16.456 Z19.2 F30000 G1 X18.752 Y-10.052 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X18.752 Y-32.552 E.74638 G1 X19.148 Y-32.552 E.01313 G1 X19.148 Y-10.052 E.74638 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X18.345 Y-32.96 E.77339 G1 X19.555 Y-32.96 E.04014 G1 X19.555 Y-9.645 E.77339 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-33.395 E.74312 G1 X19.99 Y-33.395 E.06391 G1 X19.99 Y-9.21 E.74312 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X18.114 Y-18.841 Z19.2 F30000 G1 X18.752 Y-47.948 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.448 E.28197 G1 X18.752 Y-39.448 E.01313 G1 X18.752 Y-47.908 E.28065 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-39.04 E.30898 G1 X18.345 Y-39.04 E.04014 G1 X18.345 Y-48.315 E.30765 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.605 E.31294 G1 X17.91 Y-38.605 E.06391 G1 X17.91 Y-48.75 E.31171 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X26.677 Y-52.319 Z19.2 F30000 G1 X30.752 Y-54.445 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X31.148 Y-54.445 E.01313 G1 X31.148 Y-52.052 E.07938 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-54.405 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.852 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X31.555 Y-54.852 E.04014 G1 X31.555 Y-51.645 E.10639 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.812 E.10506 G1 X29.91 Y-55.287 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X31.99 Y-55.287 E.06391 G1 X31.99 Y-51.21 E.12528 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-55.247 E.12405 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-55.286 ;WIPE_END G1 X30.752 Y-57.555 Z19.2 F30000 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F12931 G1 X30.752 Y-59.948 E.07938 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-57.555 E.07938 G1 X30.792 Y-57.555 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.148 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12931 G1 X30.345 Y-60.355 E.10639 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.148 E.10639 G1 X30.385 Y-57.148 E.03881 G1 X29.91 Y-56.713 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.12528 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-56.713 E.12528 G1 X29.95 Y-56.713 E.06268 ;LAYER_CHANGE ;Z:19 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.93 Y-58.713 ;WIPE_END ;AFTER_LAYER_CHANGE ;19 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.4 I-1.148 J.404 P1 F30000 G1 X50 Y-1.735 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G3 X50.125 Y-1.73 I.006 J1.757 E.00416 G3 X48.39 Y-.667 I-.131 J1.734 E.29023 G3 X49.96 Y-1.734 I1.616 J.689 E.06653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X50.165 Y-2.136 E.00551 G1 X50.42 Y-2.111 E.00848 G3 X49.96 Y-2.151 I-.419 J2.105 E.43209 G1 X50 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X50 Y-2.589 E.00001 G1 X50.208 Y-2.568 E.00642 G1 X50.505 Y-2.539 E.00917 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.96 Y-2.585 E.01436 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.208 Y-2.568 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.776 Y-1.875 ;WIPE_END G1 X49.545 Y.373 Z19.4 F30000 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11205 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F11205 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11205 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11205 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X46.598 Y-6.602 Z19.4 F30000 G1 X30.752 Y-57.877 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X30.752 Y-59.948 E.06869 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-57.877 E.06869 G1 X30.792 Y-57.877 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.47 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X30.345 Y-60.355 E.09569 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.47 E.09569 G1 X30.385 Y-57.47 E.03881 G1 X29.91 Y-57.035 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X29.91 Y-60.79 E.11537 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.035 E.11537 G1 X29.95 Y-57.035 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.929 Y-59.035 ;WIPE_END G1 X30.752 Y-54.123 Z19.4 F30000 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X31.148 Y-54.123 E.01313 G1 X31.148 Y-52.052 E.06869 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-54.083 E.06736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.53 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X31.555 Y-54.53 E.04014 G1 X31.555 Y-51.645 E.09569 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.49 E.09437 G1 X29.91 Y-54.965 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X31.99 Y-54.965 E.06391 G1 X31.99 Y-51.21 E.11537 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.925 E.11414 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.963 ;WIPE_END G1 X25.175 Y-51.372 Z19.4 F30000 G1 X18.752 Y-47.948 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.467 E.28132 G1 X18.752 Y-39.467 E.01313 G1 X18.752 Y-47.908 E.27999 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-39.06 E.30833 G1 X18.345 Y-39.06 E.04014 G1 X18.345 Y-48.315 E.307 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.625 E.31234 G1 X17.91 Y-38.625 E.06391 G1 X17.91 Y-48.75 E.31111 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z19.4 F30000 G1 X18.752 Y-10.052 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X18.752 Y-32.533 E.74573 G1 X19.148 Y-32.533 E.01313 G1 X19.148 Y-10.052 E.74573 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X18.345 Y-32.94 E.77273 G1 X19.555 Y-32.94 E.04014 G1 X19.555 Y-9.645 E.77273 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X17.91 Y-33.375 E.74252 G1 X19.99 Y-33.375 E.06391 G1 X19.99 Y-9.21 E.74252 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z19.4 F30000 G1 X-2.945 Y22.045 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z19.4 F30000 G1 X-5.294 Y52.737 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-5.261 Y52.547 E.0064 G3 X-4.443 Y51.488 I1.684 J.455 E.04557 G3 X-3.665 Y51.26 I.853 J1.472 E.02716 G3 X-5.307 Y52.775 I.087 J1.742 E.28314 G1 X-4.856 Y52.817 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X-4.841 Y52.659 E.00487 G3 X-4.071 Y51.789 I1.263 J.341 E.03698 G3 X-3.636 Y51.694 I.514 J1.306 E.01374 G3 X-4.886 Y53 I.059 J1.307 E.19127 G1 X-4.863 Y52.857 E.00446 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.781 Y52.499 G1 X-4.647 Y52.258 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.636 Y51.694 G1 X-3.481 Y51.698 ;WIPE_END G1 X-11.109 Y51.951 Z19.4 F30000 G1 X-15.537 Y52.097 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-15.526 Y52.132 E.00121 G3 X-17.903 Y51.488 I-1.512 J.87 E.27286 G3 X-17.125 Y51.26 I.853 J1.472 E.02716 G3 X-15.652 Y51.942 I.087 J1.742 E.05602 G1 X-15.561 Y52.065 E.00505 G1 X-15.899 Y52.339 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X-15.903 Y52.349 E.00035 G3 X-17.531 Y51.789 I-1.135 J.651 E.19484 G3 X-17.096 Y51.694 I.514 J1.306 E.01374 G3 X-15.997 Y52.208 I.059 J1.307 E.03876 G1 X-15.923 Y52.307 E.00381 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.903 Y52.349 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.292 Y54.079 ;WIPE_END G1 X-8.732 Y53.027 Z19.4 F30000 G1 X-5.991 Y52.645 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-5.93 Y52.645 E.00203 G1 X-5.744 Y52.099 E.01912 G3 X-3.534 Y50.649 I2.173 J.901 E.09312 G3 X-5.744 Y53.901 I-.038 J2.351 E.3356 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42893 G1 X-14.67 Y52.645 E.01912 G1 X-6.031 Y52.645 E.28658 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G3 X-3.506 Y50.215 I2.69 J.815 E.11165 G3 X-6.241 Y53.79 I-.065 J2.784 E.37664 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F11205 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299789 G1 X-5.652 Y52.893 E.00332 M73 P87 R9 ;WIDTH:0.335724 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350971 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366222 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297819 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.563 Y55.05 I2.089 J-.345 E.04791 G1 X-3.302 Y55.032 E.00426 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G1 X-1.676 Y53.784 E.00426 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y52.993 E.00447 G1 X-1.538 Y52.732 E.00426 G1 X-1.592 Y52.463 E.00447 G1 X-1.676 Y52.216 E.00426 G1 X-1.792 Y51.981 E.00426 G1 X-1.94 Y51.757 E.00436 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.95 E.00436 G1 X-3.838 Y50.968 E.00436 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11205 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366213 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335717 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297816 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242552 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.567 Y51.022 E.00436 G1 X-17.814 Y51.106 E.00426 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.604 J-1.97 E.00877 ;WIDTH:0.299785 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335722 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357047 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z19.4 F30000 G1 X-39.352 Y-10.052 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.533 E.74573 G1 X-39.352 Y-32.533 E.01313 G1 X-39.352 Y-10.092 E.7444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-32.94 E.77273 G1 X-38.945 Y-32.94 E.04014 G1 X-38.945 Y-9.685 E.77141 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.375 E.74252 G1 X-38.51 Y-33.375 E.06391 G1 X-38.51 Y-9.25 E.74129 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z19.4 F30000 G1 X-39.352 Y-47.948 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-39.352 Y-39.467 E.28132 G1 X-39.748 Y-39.467 E.01313 G1 X-39.748 Y-47.948 E.28132 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X-38.945 Y-39.06 E.30833 G1 X-40.155 Y-39.06 E.04014 G1 X-40.155 Y-48.355 E.30833 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X-38.51 Y-38.625 E.31234 G1 X-40.59 Y-38.625 E.06391 G1 X-40.59 Y-48.79 E.31234 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.166 Y-50.582 Z19.4 F30000 G1 X-51.352 Y-54.123 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-51.352 Y-52.052 E.06869 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-54.123 E.06869 G1 X-51.392 Y-54.123 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.53 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X-50.945 Y-51.645 E.09569 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.53 E.09569 G1 X-50.985 Y-54.53 E.03881 G1 X-50.51 Y-54.965 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X-50.51 Y-51.21 E.11537 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.965 E.11537 G1 X-50.55 Y-54.965 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.529 Y-52.965 ;WIPE_END G1 X-51.352 Y-57.877 Z19.4 F30000 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11205 G1 X-51.748 Y-57.877 E.01313 G1 X-51.748 Y-59.948 E.06869 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-57.917 E.06736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.47 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11205 G1 X-52.155 Y-57.47 E.04014 G1 X-52.155 Y-60.355 E.09569 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.51 E.09437 G1 X-50.51 Y-57.035 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11205 G1 X-52.59 Y-57.035 E.06391 G1 X-52.59 Y-60.79 E.11537 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.075 E.11414 ;LAYER_CHANGE ;Z:19.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;19.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.037 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.6 I-.578 J1.071 P1 F30000 G1 X50 Y-1.736 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G3 X50.122 Y-1.731 I-.014 J1.724 E.00406 G3 X48.551 Y-.968 I-.129 J1.734 E.30166 G3 X49.96 Y-1.736 I1.435 J.957 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G3 X50.162 Y-2.136 I.001 J2.147 E.00538 G1 X50.42 Y-2.111 E.00859 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.25038 G1 X49.999 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X50 Y-2.589 E.00002 G1 X50.205 Y-2.569 E.00632 G1 X50.505 Y-2.539 E.00928 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.959 Y-2.585 E.01434 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.205 Y-2.569 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.776 Y-1.876 ;WIPE_END G1 X49.148 Y1.038 Z19.6 F30000 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11118 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11118 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11118 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F11118 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.834 Y.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.801 Y-.02 G1 X49.873 Y-.154 G1 X50.02 Y-.199 G1 X50.154 Y-.127 G1 X50.199 Y.02 G1 X50.127 Y.154 G1 X49.98 Y.199 G1 X49.846 Y.127 ;WIPE_END G1 X47.467 Y-7.126 Z19.6 F30000 G1 X30.752 Y-58.102 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X30.752 Y-59.948 E.06123 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.102 E.06123 G1 X30.792 Y-58.102 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.695 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X30.345 Y-60.355 E.08824 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.695 E.08824 G1 X30.385 Y-57.695 E.03881 G1 X29.91 Y-57.26 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X29.91 Y-60.79 E.10847 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.26 E.10847 G1 X29.95 Y-57.26 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.927 Y-59.26 ;WIPE_END G1 X30.752 Y-53.898 Z19.6 F30000 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X31.148 Y-53.898 E.01313 G1 X31.148 Y-52.052 E.06123 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.858 E.0599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.305 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X31.555 Y-54.305 E.04014 G1 X31.555 Y-51.645 E.08824 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.265 E.08691 G1 X29.91 Y-54.74 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X31.99 Y-54.74 E.06391 G1 X31.99 Y-51.21 E.10847 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.7 E.10724 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.738 ;WIPE_END G1 X25.127 Y-51.238 Z19.6 F30000 G1 X18.752 Y-47.948 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.467 E.28132 G1 X18.752 Y-39.467 E.01313 G1 X18.752 Y-47.908 E.27999 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-39.06 E.30833 G1 X18.345 Y-39.06 E.04014 G1 X18.345 Y-48.315 E.307 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.625 E.31234 G1 X17.91 Y-38.625 E.06391 G1 X17.91 Y-48.75 E.31111 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z19.6 F30000 G1 X18.752 Y-10.052 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X18.752 Y-32.533 E.74573 G1 X19.148 Y-32.533 E.01313 G1 X19.148 Y-10.052 E.74573 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X18.345 Y-32.94 E.77273 G1 X19.555 Y-32.94 E.04014 G1 X19.555 Y-9.645 E.77273 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X17.91 Y-33.375 E.74252 G1 X19.99 Y-33.375 E.06391 G1 X19.99 Y-9.21 E.74252 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z19.6 F30000 G1 X-2.945 Y22.045 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z19.6 F30000 G1 X-5.291 Y52.783 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-5.282 Y52.636 E.00488 G3 X-4.443 Y51.488 I1.705 J.365 E.04861 G3 X-3.661 Y51.26 I.854 J1.473 E.02728 G3 X-5.321 Y53 I.084 J1.741 E.27531 G1 X-5.297 Y52.823 E.00593 G1 X-4.875 Y52.828 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G3 X-4.071 Y51.789 I1.297 J.173 E.04227 G3 X-3.633 Y51.694 I.515 J1.307 E.01385 G3 X-4.88 Y52.868 I.055 J1.308 E.19536 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.836 Y52.661 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.633 Y51.694 G1 X-3.493 Y51.698 ;WIPE_END G1 X-11.121 Y51.951 Z19.6 F30000 G1 X-15.537 Y52.097 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-15.526 Y52.132 E.0012 G3 X-17.903 Y51.488 I-1.511 J.869 E.27264 G3 X-17.121 Y51.26 I.854 J1.473 E.02728 G3 X-15.652 Y51.943 I.084 J1.741 E.05589 G1 X-15.561 Y52.065 E.00507 G1 X-15.899 Y52.339 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X-15.903 Y52.349 E.00033 G3 X-17.531 Y51.789 I-1.135 J.652 E.19496 G3 X-17.093 Y51.694 I.515 J1.308 E.01385 G3 X-15.997 Y52.207 I.055 J1.308 E.03866 G1 X-15.923 Y52.307 E.00382 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.903 Y52.349 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.292 Y54.079 ;WIPE_END G1 X-8.737 Y52.993 Z19.6 F30000 G1 X-5.91 Y52.587 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-5.744 Y52.099 E.01708 G3 X-3.538 Y50.648 I2.173 J.901 E.09299 G3 X-5.744 Y53.901 I-.034 J2.351 E.33573 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42896 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G3 X-3.51 Y50.214 I2.667 J.783 E.11175 G3 X-6.241 Y53.79 I-.06 J2.786 E.37698 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.538 Y52.447 F30000 ;TYPE:Gap infill ;WIDTH:0.2425 G1 F11118 G1 X-5.579 Y52.577 E.00223 G1 X-5.622 Y52.738 E.0027 ;WIDTH:0.299787 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350968 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366225 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335728 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297822 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.2425 G2 X-3.831 Y55.033 I2.09 J-.34 E.04359 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00425 G1 X-2.551 Y54.778 E.00425 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G2 X-5.466 Y52.214 I-1.78 J-1.018 E.10899 G1 X-5.526 Y52.409 E.0033 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11118 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366217 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335722 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242552 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.561 Y51.02 E.00426 G1 X-17.808 Y51.104 E.00426 G1 X-18.049 Y51.222 E.00436 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.604 J-1.97 E.00877 ;WIDTH:0.299782 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335718 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357044 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z19.6 F30000 G1 X-39.352 Y-10.052 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.533 E.74573 G1 X-39.352 Y-32.533 E.01313 G1 X-39.352 Y-10.092 E.7444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-32.94 E.77273 G1 X-38.945 Y-32.94 E.04014 G1 X-38.945 Y-9.685 E.77141 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.375 E.74252 G1 X-38.51 Y-33.375 E.06391 G1 X-38.51 Y-9.25 E.74129 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z19.6 F30000 G1 X-39.352 Y-47.948 Z19.6 M73 P88 R9 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-39.352 Y-39.467 E.28132 G1 X-39.748 Y-39.467 E.01313 G1 X-39.748 Y-47.948 E.28132 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X-38.945 Y-39.06 E.30833 G1 X-40.155 Y-39.06 E.04014 G1 X-40.155 Y-48.355 E.30833 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X-38.51 Y-38.625 E.31234 G1 X-40.59 Y-38.625 E.06391 G1 X-40.59 Y-48.79 E.31234 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.216 Y-50.493 Z19.6 F30000 G1 X-51.352 Y-53.898 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-51.352 Y-52.052 E.06123 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.898 E.06123 G1 X-51.392 Y-53.898 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.305 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X-50.945 Y-51.645 E.08824 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.305 E.08824 G1 X-50.985 Y-54.305 E.03881 G1 X-50.51 Y-54.74 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X-50.51 Y-51.21 E.10847 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.74 E.10847 G1 X-50.55 Y-54.74 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.527 Y-52.74 ;WIPE_END G1 X-51.352 Y-58.102 Z19.6 F30000 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11118 G1 X-51.748 Y-58.102 E.01313 G1 X-51.748 Y-59.948 E.06123 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.142 E.0599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.695 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11118 G1 X-52.155 Y-57.695 E.04014 G1 X-52.155 Y-60.355 E.08824 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.735 E.08691 G1 X-50.51 Y-57.26 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11118 G1 X-52.59 Y-57.26 E.06391 G1 X-52.59 Y-60.79 E.10847 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.3 E.10724 ;LAYER_CHANGE ;Z:19.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;19.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.262 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.8 I-.58 J1.07 P1 F30000 G1 X50 Y-1.736 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G3 X50.119 Y-1.731 I-.014 J1.725 E.00394 G3 X48.551 Y-.968 I-.126 J1.734 E.30178 G3 X49.96 Y-1.736 I1.435 J.957 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G3 X50.159 Y-2.136 I.001 J2.147 E.00527 G1 X50.42 Y-2.111 E.00871 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.25038 G1 X49.999 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X50 Y-2.589 E.00003 G1 X50.201 Y-2.569 E.00621 G1 X50.505 Y-2.539 E.00938 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.959 Y-2.585 E.01433 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.201 Y-2.569 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.776 Y-1.876 ;WIPE_END G1 X49.148 Y-1.038 Z19.8 F30000 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11092 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11092 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F11092 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11092 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y.951 G1 X49.811 Y.951 G1 X49.461 Y.806 G1 X49.194 Y.539 G1 X49.049 Y.189 G1 X49.049 Y.042 ;WIPE_END G1 X46.762 Y-7.24 Z19.8 F30000 G1 X30.752 Y-58.236 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X30.752 Y-59.948 E.0568 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.236 E.0568 G1 X30.792 Y-58.236 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.829 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X30.345 Y-60.355 E.0838 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.829 E.0838 G1 X30.385 Y-57.829 E.03881 G1 X29.91 Y-57.394 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X29.91 Y-60.79 E.10436 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.394 E.10436 G1 X29.95 Y-57.394 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.926 Y-59.394 ;WIPE_END G1 X30.752 Y-53.764 Z19.8 F30000 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X31.148 Y-53.764 E.01313 G1 X31.148 Y-52.052 E.0568 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.724 E.05547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.171 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X31.555 Y-54.171 E.04014 G1 X31.555 Y-51.645 E.0838 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.131 E.08248 G1 X29.91 Y-54.606 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X31.99 Y-54.606 E.06391 G1 X31.99 Y-51.21 E.10436 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.566 E.10313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.605 ;WIPE_END G1 X25.099 Y-51.159 Z19.8 F30000 G1 X18.752 Y-47.948 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.448 E.28197 G1 X18.752 Y-39.448 E.01313 G1 X18.752 Y-47.908 E.28065 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-39.04 E.30898 G1 X18.345 Y-39.04 E.04014 G1 X18.345 Y-48.315 E.30765 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.605 E.31294 G1 X17.91 Y-38.605 E.06391 G1 X17.91 Y-48.75 E.31171 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z19.8 F30000 G1 X18.752 Y-10.052 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X18.752 Y-32.552 E.74638 G1 X19.148 Y-32.552 E.01313 G1 X19.148 Y-10.052 E.74638 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X18.345 Y-32.96 E.77339 G1 X19.555 Y-32.96 E.04014 G1 X19.555 Y-9.645 E.77339 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X17.91 Y-33.395 E.74312 G1 X19.99 Y-33.395 E.06391 G1 X19.99 Y-9.21 E.74312 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z19.8 F30000 G1 X-2.945 Y22.045 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.829 Y30.406 Z19.8 F30000 G1 X-5.292 Y52.723 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-5.261 Y52.547 E.00592 G3 X-4.443 Y51.488 I1.684 J.454 E.04556 G3 X-3.658 Y51.259 I.854 J1.474 E.0274 G3 X-5.306 Y52.771 I.08 J1.742 E.2829 G1 X-5.303 Y52.761 E.00036 G1 X-4.865 Y52.808 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X-4.841 Y52.659 E.00461 G3 X-4.071 Y51.789 I1.264 J.342 E.03698 G3 X-3.629 Y51.693 I.515 J1.309 E.01396 G3 X-4.877 Y52.845 I.052 J1.308 E.19596 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.841 Y52.659 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.629 Y51.693 G1 X-3.471 Y51.698 ;WIPE_END G1 X-11.099 Y51.951 Z19.8 F30000 G1 X-15.537 Y52.098 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-15.526 Y52.131 E.00117 G3 X-17.903 Y51.488 I-1.512 J.871 E.27287 G3 X-17.118 Y51.259 I.854 J1.474 E.0274 G3 X-15.652 Y51.942 I.08 J1.743 E.05579 G1 X-15.561 Y52.066 E.00509 G1 X-15.898 Y52.34 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X-15.902 Y52.349 E.00031 G3 X-17.531 Y51.789 I-1.135 J.652 E.19496 G3 X-17.089 Y51.693 I.515 J1.309 E.01396 G3 X-15.997 Y52.207 I.052 J1.308 E.03856 G1 X-15.922 Y52.308 E.00384 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.902 Y52.349 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.292 Y54.08 ;WIPE_END G1 X-8.738 Y52.994 Z19.8 F30000 G1 X-5.91 Y52.587 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-5.744 Y52.099 E.01708 G3 X-3.542 Y50.648 I2.173 J.901 E.09287 G3 X-5.744 Y53.901 I-.03 J2.351 E.33587 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42899 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G3 X-3.514 Y50.214 I2.69 J.814 E.11142 G3 X-6.241 Y53.79 I-.056 J2.786 E.3771 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.672 J-.79 E.4887 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.547 Y52.461 F30000 ;TYPE:Gap infill ;WIDTH:0.242512 G1 F11092 G1 X-5.552 Y52.476 E.00026 G2 X-5.622 Y52.738 I3.96 J1.193 E.00441 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.33572 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350968 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387468 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366221 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335723 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297818 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242512 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G2 X-5.461 Y52.21 I-1.78 J-1.016 E.10874 G1 X-5.534 Y52.423 E.00366 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11092 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366216 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335722 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297818 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242553 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.561 Y51.02 E.00426 G1 X-17.808 Y51.104 E.00426 G1 X-18.049 Y51.222 E.00436 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.604 J-1.97 E.00877 ;WIDTH:0.299786 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335722 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357047 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z19.8 F30000 G1 X-39.352 Y-10.052 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.552 E.74638 G1 X-39.352 Y-32.552 E.01313 G1 X-39.352 Y-10.092 E.74505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-32.96 E.77339 G1 X-38.945 Y-32.96 E.04014 G1 X-38.945 Y-9.685 E.77206 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.395 E.74312 G1 X-38.51 Y-33.395 E.06391 G1 X-38.51 Y-9.25 E.74189 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z19.8 F30000 G1 X-39.352 Y-47.948 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-39.352 Y-39.448 E.28197 G1 X-39.748 Y-39.448 E.01313 G1 X-39.748 Y-47.948 E.28197 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X-38.945 Y-39.04 E.30898 G1 X-40.155 Y-39.04 E.04014 G1 X-40.155 Y-48.355 E.30898 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X-38.51 Y-38.605 E.31294 G1 X-40.59 Y-38.605 E.06391 G1 X-40.59 Y-48.79 E.31294 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.246 Y-50.44 Z19.8 F30000 G1 X-51.352 Y-53.764 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-51.352 Y-52.052 E.0568 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.764 E.0568 G1 X-51.392 Y-53.764 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.171 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X-50.945 Y-51.645 E.0838 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.171 E.0838 G1 X-50.985 Y-54.171 E.03881 G1 X-50.51 Y-54.606 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X-50.51 Y-51.21 E.10436 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.606 E.10436 G1 X-50.55 Y-54.606 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.526 Y-52.606 ;WIPE_END G1 X-51.352 Y-58.236 Z19.8 F30000 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11092 G1 X-51.748 Y-58.236 E.01313 G1 X-51.748 Y-59.948 E.0568 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.276 E.05547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.829 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11092 G1 X-52.155 Y-57.829 E.04014 G1 X-52.155 Y-60.355 E.0838 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.869 E.08248 G1 X-50.51 Y-57.394 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11092 G1 X-52.59 Y-57.394 E.06391 G1 X-52.59 Y-60.79 E.10436 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.434 E.10313 ;LAYER_CHANGE ;Z:19.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;19.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.395 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20 I-.581 J1.069 P1 F30000 G1 X50 Y-1.736 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G3 X50.115 Y-1.731 I-.014 J1.725 E.00383 G3 X48.551 Y-.968 I-.122 J1.734 E.3019 G3 X49.96 Y-1.736 I1.435 J.957 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G3 X50.155 Y-2.137 I.001 J2.147 E.00516 G1 X50.42 Y-2.111 E.00882 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.25039 G1 X49.999 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X50 Y-2.589 E.00004 G1 X50.198 Y-2.569 E.00611 G1 X50.505 Y-2.539 E.00948 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.959 Y-2.585 E.01432 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.198 Y-2.569 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.775 Y-1.876 ;WIPE_END G1 X49.829 Y-.563 Z20 F30000 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11064 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F11064 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11064 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11064 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X46.615 Y-6.607 Z20 F30000 G1 X30.752 Y-58.353 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X30.752 Y-59.948 E.05292 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.353 E.05292 G1 X30.792 Y-58.353 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.946 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X30.345 Y-60.355 E.07993 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.946 E.07993 G1 X30.385 Y-57.946 E.03881 G1 X29.91 Y-57.511 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X29.91 Y-60.79 E.10077 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.511 E.10077 G1 X29.95 Y-57.511 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.926 Y-59.51 ;WIPE_END G1 X30.752 Y-53.647 Z20 F30000 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X31.148 Y-53.647 E.01313 G1 X31.148 Y-52.052 E.05292 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.607 E.05159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.054 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X31.555 Y-54.054 E.04014 G1 X31.555 Y-51.645 E.07993 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.014 E.0786 G1 X29.91 Y-54.489 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X31.99 Y-54.489 E.06391 G1 X31.99 Y-51.21 E.10077 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.449 E.09954 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.488 ;WIPE_END G1 X25.075 Y-51.091 Z20 F30000 G1 X18.752 Y-47.948 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.422 E.28281 G1 X18.752 Y-39.422 E.01313 G1 X18.752 Y-47.908 E.28148 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-39.015 E.30982 G1 X18.345 Y-39.015 E.04014 G1 X18.345 Y-48.315 E.30849 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.58 E.31372 G1 X17.91 Y-38.58 E.06391 G1 X17.91 Y-48.75 E.31249 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z20 F30000 G1 X18.752 Y-10.052 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X18.752 Y-32.578 E.74722 G1 X19.148 Y-32.578 E.01313 G1 X19.148 Y-10.052 E.74722 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X18.345 Y-32.985 E.77422 G1 X19.555 Y-32.985 E.04014 G1 X19.555 Y-9.645 E.77422 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X17.91 Y-33.42 E.7439 G1 X19.99 Y-33.42 E.06391 G1 X19.99 Y-9.21 E.7439 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z20 F30000 G1 X-2.945 Y22.045 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.827 Y30.406 Z20 F30000 G1 X-5.286 Y52.74 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-5.281 Y52.629 E.00369 G3 X-4.443 Y51.488 I1.703 J.372 E.04836 G3 X-3.654 Y51.259 I.855 J1.475 E.02752 G3 X-5.321 Y53 I.077 J1.742 E.27509 G1 X-5.291 Y52.78 E.00737 G1 X-4.856 Y52.791 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X-4.854 Y52.714 E.00235 G3 X-4.071 Y51.789 I1.277 J.287 E.0387 G3 X-3.626 Y51.693 I.516 J1.312 E.01407 G3 X-4.886 Y53 I.049 J1.308 E.1911 G1 X-4.861 Y52.83 E.00528 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.854 Y52.714 G1 X-4.781 Y52.499 G1 X-4.641 Y52.249 G1 X-4.497 Y52.073 G1 X-4.225 Y51.865 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.626 Y51.693 G1 X-3.454 Y51.699 ;WIPE_END G1 X-11.083 Y51.951 Z20 F30000 G1 X-15.536 Y52.099 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-15.525 Y52.131 E.00114 G3 X-17.903 Y51.488 I-1.512 J.871 E.27287 G3 X-17.114 Y51.259 I.855 J1.475 E.02752 G3 X-15.651 Y51.942 I.077 J1.743 E.05567 G1 X-15.56 Y52.067 E.00512 G1 X-15.898 Y52.341 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X-15.903 Y52.349 E.00031 G3 X-17.531 Y51.789 I-1.134 J.651 E.19475 G3 X-17.086 Y51.693 I.516 J1.312 E.01407 G3 X-15.997 Y52.207 I.049 J1.307 E.03844 G1 X-15.922 Y52.308 E.00387 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.903 Y52.349 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.293 Y54.08 ;WIPE_END G1 X-8.734 Y53.027 Z20 F30000 G1 X-5.991 Y52.645 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-5.93 Y52.645 E.00203 G1 X-5.744 Y52.099 E.01912 G3 X-3.546 Y50.648 I2.173 J.901 E.09274 G3 X-5.744 Y53.901 I-.026 J2.351 E.336 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-6.031 Y52.645 E.28658 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G3 X-3.518 Y50.214 I2.689 J.813 E.11131 G3 X-6.241 Y53.79 I-.052 J2.786 E.37724 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242538 G1 F11064 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.29979 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335725 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350971 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366221 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.29782 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242538 G2 X-3.563 Y55.05 I2.089 J-.345 E.0479 G1 X-3.302 Y55.032 E.00426 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G1 X-1.676 Y53.784 E.00426 G1 X-1.592 Y53.537 E.00426 G1 X-1.539 Y53.274 E.00436 G1 X-1.52 Y53 E.00447 G1 X-1.537 Y52.739 E.00426 G1 X-1.59 Y52.469 E.00447 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.94 Y51.757 E.00426 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.564 Y50.951 E.00426 G1 X-3.838 Y50.968 E.00447 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.02 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11064 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366213 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335717 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297815 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242553 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.567 Y51.022 E.00436 G1 X-17.814 Y51.106 E.00426 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.605 J-1.97 E.00877 ;WIDTH:0.299785 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335722 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357047 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z20 F30000 G1 X-39.352 Y-10.052 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.578 E.74722 G1 X-39.352 Y-32.578 E.01313 G1 X-39.352 Y-10.092 E.74589 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-32.985 E.77422 G1 X-38.945 Y-32.985 E.04014 G1 X-38.945 Y-9.685 E.7729 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.42 E.7439 G1 X-38.51 Y-33.42 E.06391 G1 X-38.51 Y-9.25 E.74267 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z20 F30000 G1 X-39.352 Y-47.948 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-39.352 Y-39.422 E.28281 G1 X-39.748 Y-39.422 E.01313 G1 X-39.748 Y-47.948 E.28281 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X-38.945 Y-39.015 E.30982 G1 X-40.155 Y-39.015 E.04014 G1 X-40.155 Y-48.355 E.30982 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X-38.51 Y-38.58 E.31372 G1 X-40.59 Y-38.58 E.06391 G1 X-40.59 Y-48.79 E.31372 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.271 Y-50.392 Z20 F30000 G1 X-51.352 Y-53.647 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-51.352 Y-52.052 E.05292 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.647 E.05292 G1 X-51.392 Y-53.647 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.054 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X-50.945 Y-51.645 E.07993 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.054 E.07993 G1 X-50.985 Y-54.054 E.03881 G1 X-50.51 Y-54.489 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X-50.51 Y-51.21 E.10077 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.489 E.10077 G1 X-50.55 Y-54.489 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.526 Y-52.49 ;WIPE_END G1 X-51.352 Y-58.353 Z20 F30000 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11064 G1 X-51.748 Y-58.353 E.01313 G1 X-51.748 Y-59.948 E.05292 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.393 E.05159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.946 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11064 G1 X-52.155 Y-57.946 E.04014 G1 X-52.155 Y-60.355 E.07993 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.986 E.0786 G1 X-50.51 Y-57.511 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11064 G1 X-52.59 Y-57.511 E.06391 G1 X-52.59 Y-60.79 E.10077 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.551 E.09954 ;LAYER_CHANGE ;Z:19.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;19.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.512 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.2 I-.582 J1.069 P1 F30000 G1 X50 Y-1.736 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G3 X50.112 Y-1.732 I-.014 J1.725 E.00372 G3 X48.551 Y-.968 I-.119 J1.735 E.30203 G3 X49.96 Y-1.736 I1.435 J.957 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G3 X50.152 Y-2.137 I.001 J2.147 E.00504 G1 X50.42 Y-2.111 E.00893 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.823 J-1.983 E.25039 G1 X49.998 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X50 Y-2.589 E.00006 G1 X50.195 Y-2.57 E.00601 G1 X50.505 Y-2.539 E.00959 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.958 Y-2.585 E.01431 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.195 Y-2.57 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.775 Y-1.876 ;WIPE_END G1 X49.868 Y1.336 Z20.2 F30000 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11080 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F11080 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11080 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11080 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END G1 X48 Y-6.381 Z20.2 F30000 G1 X30.752 Y-58.392 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X30.752 Y-59.948 E.0516 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.392 E.0516 G1 X30.792 Y-58.392 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.985 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X30.345 Y-60.355 E.07861 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.985 E.07861 G1 X30.385 Y-57.985 E.03881 G1 X29.91 Y-57.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X29.91 Y-60.79 E.09955 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.55 E.09955 G1 X29.95 Y-57.55 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.925 Y-59.55 ;WIPE_END G1 X30.752 Y-53.608 Z20.2 F30000 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X31.148 Y-53.608 E.01313 G1 X31.148 Y-52.052 E.0516 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.568 E.05027 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.015 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X31.555 Y-54.015 E.04014 G1 X31.555 Y-51.645 E.07861 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-53.975 E.07728 G1 X29.91 Y-54.45 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X31.99 Y-54.45 E.06391 G1 X31.99 Y-51.21 E.09955 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.41 E.09832 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.448 ;WIPE_END G1 X25.067 Y-51.068 Z20.2 F30000 G1 X18.752 Y-47.948 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.362 E.28482 G1 X18.752 Y-39.362 E.01313 G1 X18.752 Y-47.908 E.2835 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.955 E.31183 G1 X18.345 Y-38.955 E.04014 G1 X18.345 Y-48.315 E.3105 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.52 E.31558 G1 X17.91 Y-38.52 E.06391 G1 X17.91 Y-48.75 E.31435 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z20.2 F30000 G1 X18.752 Y-10.052 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X18.752 Y-32.638 E.74923 G1 X19.148 Y-32.638 E.01313 G1 X19.148 Y-10.052 E.74923 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X18.345 Y-33.045 E.77624 G1 X19.555 Y-33.045 E.04014 G1 X19.555 Y-9.645 E.77624 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X17.91 Y-33.48 E.74576 G1 X19.99 Y-33.48 E.06391 G1 X19.99 Y-9.21 E.74576 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z20.2 F30000 G1 X-2.945 Y22.045 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z20.2 F30000 G1 X-5.288 Y52.703 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-5.264 Y52.546 E.00525 G3 X-4.238 Y51.387 I1.684 J.456 E.0532 G3 X-3.651 Y51.259 I.687 J1.744 E.02004 G3 X-5.309 Y52.771 I.071 J1.743 E.28273 G1 X-5.299 Y52.741 E.00105 G1 X-4.861 Y52.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X-4.84 Y52.66 E.00398 G3 X-4.071 Y51.789 I1.264 J.342 E.03697 G3 X-3.622 Y51.693 I.517 J1.314 E.01418 G3 X-4.874 Y52.828 I.046 J1.308 E.19629 G1 X-4.873 Y52.826 E.00009 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.84 Y52.66 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.622 Y51.693 G1 X-3.451 Y51.699 ;WIPE_END G1 X-11.079 Y51.952 Z20.2 F30000 G1 X-15.536 Y52.1 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-15.525 Y52.131 E.0011 G3 X-17.903 Y51.488 I-1.512 J.871 E.27287 G3 X-17.111 Y51.259 I.855 J1.476 E.02764 G3 X-15.651 Y51.942 I.074 J1.743 E.05556 G1 X-15.559 Y52.068 E.00516 G1 X-15.897 Y52.342 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X-15.903 Y52.349 E.00028 G3 X-17.531 Y51.789 I-1.134 J.651 E.19475 G3 X-17.082 Y51.693 I.517 J1.314 E.01418 G3 X-15.997 Y52.207 I.045 J1.307 E.03834 G1 X-15.921 Y52.309 E.00391 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.903 Y52.349 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.294 Y54.081 ;WIPE_END G1 X-8.74 Y52.994 Z20.2 F30000 G1 X-5.91 Y52.587 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-5.744 Y52.099 E.01708 G3 X-3.55 Y50.648 I2.173 J.901 E.09261 G3 X-5.744 Y53.901 I-.021 J2.353 E.33645 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G3 X-3.522 Y50.214 I2.689 J.813 E.11119 G3 X-6.241 Y53.79 I-.049 J2.785 E.37713 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48874 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242543 G1 F11080 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299785 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350968 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366225 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335728 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297822 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242543 G2 X-3.563 Y55.05 I2.089 J-.345 E.0479 G1 X-3.302 Y55.032 E.00426 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G1 X-1.676 Y53.784 E.00426 G1 X-1.589 Y53.524 E.00447 G1 X-1.538 Y53.268 E.00426 G1 X-1.52 Y53.007 E.00426 G1 X-1.537 Y52.739 E.00436 G1 X-1.59 Y52.469 E.00447 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.94 Y51.757 E.00426 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.564 Y50.95 E.00426 G1 X-3.838 Y50.968 E.00447 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11080 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366216 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335722 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242552 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.561 Y51.02 E.00426 G1 X-17.808 Y51.104 E.00426 G1 X-18.049 Y51.222 E.00436 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.602 J-1.969 E.00877 ;WIDTH:0.299785 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335721 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357046 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z20.2 F30000 G1 X-39.352 Y-10.052 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.638 E.74923 G1 X-39.352 Y-32.638 E.01313 G1 X-39.352 Y-10.092 E.7479 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.045 E.77624 G1 X-38.945 Y-33.045 E.04014 G1 X-38.945 Y-9.685 E.77491 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.48 E.74576 G1 X-38.51 Y-33.48 E.06391 G1 X-38.51 Y-9.25 E.74453 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z20.2 F30000 G1 X-39.352 Y-47.948 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-39.352 Y-39.362 E.28482 G1 X-39.748 Y-39.362 E.01313 G1 X-39.748 Y-47.948 E.28482 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X-38.945 Y-38.955 E.31183 G1 X-40.155 Y-38.955 E.04014 G1 X-40.155 Y-48.355 E.31183 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X-38.51 Y-38.52 E.31558 G1 X-40.59 Y-38.52 E.06391 G1 X-40.59 Y-48.79 E.31558 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.28 Y-50.376 Z20.2 F30000 G1 X-51.352 Y-53.608 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-51.352 Y-52.052 E.0516 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.608 E.0516 G1 X-51.392 Y-53.608 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.015 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X-50.945 Y-51.645 E.07861 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.015 E.07861 G1 X-50.985 Y-54.015 E.03881 G1 X-50.51 Y-54.45 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X-50.51 Y-51.21 E.09955 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.45 E.09955 G1 X-50.55 Y-54.45 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.525 Y-52.45 ;WIPE_END G1 X-51.352 Y-58.392 Z20.2 F30000 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11080 G1 X-51.748 Y-58.392 E.01313 G1 X-51.748 Y-59.948 E.0516 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.432 E.05027 M73 P88 R8 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.985 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11080 G1 X-52.155 Y-57.985 E.04014 G1 X-52.155 Y-60.355 E.07861 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-58.025 E.07728 G1 X-50.51 Y-57.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11080 G1 X-52.59 Y-57.55 E.06391 G1 X-52.59 Y-60.79 E.09955 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.59 E.09832 ;LAYER_CHANGE ;Z:20 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;20 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.552 ;WIPE_END ;AFTER_LAYER_CHANGE ;20 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.4 I-.582 J1.069 P1 F30000 G1 X50 Y-1.736 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G3 X50.109 Y-1.732 I-.014 J1.725 E.00361 G3 X48.551 Y-.968 I-.115 J1.735 E.30215 G3 X49.96 Y-1.736 I1.435 J.957 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G3 X50.149 Y-2.137 I.001 J2.147 E.00493 G1 X50.42 Y-2.111 E.00904 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.983 E.25036 G1 X49.998 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X50 Y-2.589 E.00007 G1 X50.191 Y-2.57 E.0059 G1 X50.505 Y-2.539 E.00969 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.958 Y-2.585 E.0143 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.191 Y-2.57 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.775 Y-1.877 ;WIPE_END G1 X49.829 Y-.563 Z20.4 F30000 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11076 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F11076 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11076 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11076 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X46.617 Y-6.608 Z20.4 F30000 G1 X30.752 Y-58.432 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X30.752 Y-59.948 E.05028 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.432 E.05028 G1 X30.792 Y-58.432 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-58.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X30.345 Y-60.355 E.07729 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-58.025 E.07729 G1 X30.385 Y-58.025 E.03881 G1 X29.91 Y-57.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X29.91 Y-60.79 E.09832 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.59 E.09832 G1 X29.95 Y-57.59 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.925 Y-59.59 ;WIPE_END G1 X30.752 Y-53.568 Z20.4 F30000 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X31.148 Y-53.568 E.01313 G1 X31.148 Y-52.052 E.05028 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.528 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-53.975 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X31.555 Y-53.975 E.04014 G1 X31.555 Y-51.645 E.07729 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-53.935 E.07596 G1 X29.91 Y-54.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X31.99 Y-54.41 E.06391 G1 X31.99 Y-51.21 E.09832 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.37 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.408 ;WIPE_END G1 X25.058 Y-51.044 Z20.4 F30000 G1 X18.752 Y-47.948 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.301 E.28683 G1 X18.752 Y-39.301 E.01313 G1 X18.752 Y-47.908 E.28551 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.894 E.31384 G1 X18.345 Y-38.894 E.04014 G1 X18.345 Y-48.315 E.31252 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.459 E.31745 G1 X17.91 Y-38.459 E.06391 M73 P89 R8 G1 X17.91 Y-48.75 E.31622 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z20.4 F30000 G1 X18.752 Y-10.052 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X18.752 Y-32.699 E.75124 G1 X19.148 Y-32.699 E.01313 G1 X19.148 Y-10.052 E.75124 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X18.345 Y-33.106 E.77825 G1 X19.555 Y-33.106 E.04014 G1 X19.555 Y-9.645 E.77825 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X17.91 Y-33.541 E.74763 G1 X19.99 Y-33.541 E.06391 G1 X19.99 Y-9.21 E.74763 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z20.4 F30000 G1 X-2.945 Y22.045 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.827 Y30.406 Z20.4 F30000 G1 X-5.286 Y52.74 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-5.28 Y52.622 E.00391 G3 X-4.443 Y51.488 I1.703 J.38 E.04813 G3 X-3.647 Y51.259 I.856 J1.477 E.02776 G3 X-5.321 Y53 I.07 J1.743 E.2751 G1 X-5.291 Y52.779 E.00739 G1 X-4.855 Y52.791 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X-4.851 Y52.707 E.00257 G3 X-4.071 Y51.789 I1.275 J.293 E.03846 G3 X-3.619 Y51.693 I.518 J1.317 E.01429 G3 X-4.885 Y53 I.042 J1.307 E.19069 G1 X-4.861 Y52.83 E.00526 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.851 Y52.707 G1 X-4.781 Y52.499 G1 X-4.637 Y52.243 G1 X-4.497 Y52.073 G1 X-4.266 Y51.892 G1 X-4.071 Y51.789 G1 X-3.909 Y51.734 G1 X-3.619 Y51.693 G1 X-3.454 Y51.699 ;WIPE_END G1 X-11.082 Y51.953 Z20.4 F30000 G1 X-15.535 Y52.101 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-15.521 Y52.129 E.00103 G3 X-18.5 Y53.937 I-1.51 J.871 E.17906 G3 X-17.107 Y51.259 I1.469 J-.937 E.1211 G3 X-15.647 Y51.939 I.077 J1.741 E.05553 G1 X-15.558 Y52.068 E.00521 G1 X-15.897 Y52.343 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X-15.902 Y52.349 E.00026 G3 X-17.531 Y51.789 I-1.134 J.651 E.19475 G3 X-17.079 Y51.693 I.518 J1.317 E.01429 G3 X-15.996 Y52.207 I.042 J1.307 E.03824 G1 X-15.92 Y52.31 E.00395 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.902 Y52.349 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.295 Y54.082 ;WIPE_END G1 X-8.741 Y52.994 Z20.4 F30000 G1 X-5.91 Y52.587 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-5.744 Y52.099 E.01708 G3 X-3.554 Y50.647 I2.174 J.901 E.09249 G3 X-5.744 Y53.901 I-.019 J2.351 E.33627 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.172 J-.901 E.42872 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G3 X-3.526 Y50.213 I2.689 J.812 E.11108 G3 X-6.241 Y53.79 I-.045 J2.785 E.37725 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48877 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242549 G1 F11076 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335719 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350967 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387466 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366218 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335719 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297814 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242549 G2 X-3.563 Y55.05 I2.089 J-.345 E.04791 G1 X-3.302 Y55.032 E.00426 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G1 X-1.676 Y53.784 E.00426 G1 X-1.589 Y53.524 E.00447 G1 X-1.538 Y53.268 E.00426 G1 X-1.52 Y53.006 E.00426 G1 X-1.537 Y52.739 E.00436 G1 X-1.59 Y52.469 E.00447 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.94 Y51.757 E.00426 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.568 Y50.95 E.00432 G1 X-3.838 Y50.968 E.0044 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11076 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366215 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.33572 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242553 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.567 Y51.022 E.00436 G1 X-17.814 Y51.106 E.00426 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.604 J-1.97 E.00877 ;WIDTH:0.299785 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335721 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357046 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z20.4 F30000 G1 X-39.352 Y-10.052 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.699 E.75124 G1 X-39.352 Y-32.699 E.01313 G1 X-39.352 Y-10.092 E.74991 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.106 E.77825 G1 X-38.945 Y-33.106 E.04014 G1 X-38.945 Y-9.685 E.77692 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.541 E.74763 G1 X-38.51 Y-33.541 E.06391 G1 X-38.51 Y-9.25 E.7464 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z20.4 F30000 G1 X-39.352 Y-47.948 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-39.352 Y-39.301 E.28683 G1 X-39.748 Y-39.301 E.01313 G1 X-39.748 Y-47.948 E.28683 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X-38.945 Y-38.894 E.31384 G1 X-40.155 Y-38.894 E.04014 G1 X-40.155 Y-48.355 E.31384 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X-38.51 Y-38.459 E.31745 G1 X-40.59 Y-38.459 E.06391 G1 X-40.59 Y-48.79 E.31745 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.289 Y-50.36 Z20.4 F30000 G1 X-51.352 Y-53.568 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-51.352 Y-52.052 E.05028 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.568 E.05028 G1 X-51.392 Y-53.568 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-53.975 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X-50.945 Y-51.645 E.07729 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-53.975 E.07729 G1 X-50.985 Y-53.975 E.03881 G1 X-50.51 Y-54.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X-50.51 Y-51.21 E.09832 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.41 E.09832 G1 X-50.55 Y-54.41 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.525 Y-52.41 ;WIPE_END G1 X-51.352 Y-58.432 Z20.4 F30000 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11076 G1 X-51.748 Y-58.432 E.01313 G1 X-51.748 Y-59.948 E.05028 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.472 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-58.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11076 G1 X-52.155 Y-58.025 E.04014 G1 X-52.155 Y-60.355 E.07729 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-58.065 E.07596 G1 X-50.51 Y-57.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11076 G1 X-52.59 Y-57.59 E.06391 G1 X-52.59 Y-60.79 E.09832 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.63 E.09709 ;LAYER_CHANGE ;Z:20.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;20.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.592 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.6 I-.582 J1.069 P1 F30000 G1 X50 Y-1.736 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G3 X50.105 Y-1.732 I-.013 J1.725 E.0035 G3 X48.551 Y-.968 I-.112 J1.735 E.30227 G3 X49.96 Y-1.736 I1.436 J.957 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G3 X50.145 Y-2.138 I.001 J2.147 E.00482 G1 X50.42 Y-2.111 E.00915 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.983 E.25036 G1 X49.997 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X50 Y-2.589 E.00008 G1 X50.188 Y-2.57 E.0058 G1 X50.505 Y-2.539 E.0098 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.958 Y-2.585 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.188 Y-2.57 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.775 Y-1.877 ;WIPE_END G1 X50.633 Y-1.184 Z20.6 F30000 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11098 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11098 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11098 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442575 G1 F11098 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.846 Y.127 G1 X49.801 Y-.02 G1 X49.873 Y-.154 G1 X50.02 Y-.199 G1 X50.154 Y-.127 G1 X50.199 Y.02 G1 X50.127 Y.154 G1 X49.98 Y.199 ;WIPE_END G1 X47.602 Y-7.054 Z20.6 F30000 G1 X30.752 Y-58.432 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X30.752 Y-59.948 E.05028 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.432 E.05028 G1 X30.792 Y-58.432 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-58.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X30.345 Y-60.355 E.07729 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-58.025 E.07729 G1 X30.385 Y-58.025 E.03881 G1 X29.91 Y-57.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X29.91 Y-60.79 E.09832 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.59 E.09832 G1 X29.95 Y-57.59 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.925 Y-59.59 ;WIPE_END G1 X30.752 Y-53.568 Z20.6 F30000 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X31.148 Y-53.568 E.01313 G1 X31.148 Y-52.052 E.05028 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.528 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-53.975 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X31.555 Y-53.975 E.04014 G1 X31.555 Y-51.645 E.07729 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-53.935 E.07596 G1 X29.91 Y-54.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X31.99 Y-54.41 E.06391 G1 X31.99 Y-51.21 E.09832 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.37 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.408 ;WIPE_END G1 X25.058 Y-51.044 Z20.6 F30000 G1 X18.752 Y-47.948 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.201 E.29017 G1 X18.752 Y-39.201 E.01313 G1 X18.752 Y-47.908 E.28884 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.793 E.31717 G1 X18.345 Y-38.793 E.04014 G1 X18.345 Y-48.315 E.31585 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-38.358 E.32053 G1 X17.91 Y-38.358 E.06391 G1 X17.91 Y-48.75 E.3193 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z20.6 F30000 G1 X18.752 Y-10.052 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X18.752 Y-32.799 E.75457 G1 X19.148 Y-32.799 E.01313 G1 X19.148 Y-10.052 E.75457 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X18.345 Y-33.207 E.78158 G1 X19.555 Y-33.207 E.04014 G1 X19.555 Y-9.645 E.78158 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X17.91 Y-33.642 E.75071 G1 X19.99 Y-33.642 E.06391 G1 X19.99 Y-9.21 E.75071 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z20.6 F30000 G1 X-2.945 Y22.045 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z20.6 F30000 G1 X-5.287 Y52.7 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-5.263 Y52.546 E.00516 G3 X-4.238 Y51.387 I1.684 J.456 E.05319 G3 X-3.643 Y51.258 I.688 J1.748 E.02028 G3 X-5.308 Y52.771 I.064 J1.743 E.28252 G1 X-5.299 Y52.738 E.00114 G1 X-4.86 Y52.785 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X-4.843 Y52.659 E.00391 G3 X-3.909 Y51.734 I1.264 J.342 E.04231 G3 X-3.615 Y51.692 I.305 J1.096 E.00916 G3 X-4.877 Y52.828 I.035 J1.309 E.19601 G1 X-4.875 Y52.822 E.00019 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.843 Y52.659 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.615 Y51.692 G1 X-3.449 Y51.699 ;WIPE_END G1 X-11.077 Y51.954 Z20.6 F30000 G1 X-15.534 Y52.102 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-15.527 Y52.132 E.00102 G3 X-17.698 Y51.387 I-1.512 J.87 E.28049 G3 X-17.103 Y51.258 I.688 J1.748 E.02028 G3 X-15.653 Y51.943 I.064 J1.743 E.05529 G1 X-15.558 Y52.07 E.00526 G1 X-15.896 Y52.344 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X-15.904 Y52.35 E.00031 G3 X-17.369 Y51.734 I-1.136 J.651 E.20029 G3 X-17.075 Y51.692 I.305 J1.096 E.00916 G3 X-15.998 Y52.208 I.035 J1.309 E.0381 G1 X-15.92 Y52.312 E.004 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.904 Y52.35 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.297 Y54.083 ;WIPE_END G1 X-8.742 Y52.995 Z20.6 F30000 G1 X-5.91 Y52.587 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-5.744 Y52.099 E.01708 G3 X-3.558 Y50.647 I2.174 J.901 E.09236 G3 X-5.744 Y53.901 I-.012 J2.353 E.33678 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.173 J-.901 E.42897 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G3 X-3.53 Y50.213 I2.667 J.782 E.11116 G3 X-6.241 Y53.79 I-.041 J2.785 E.37737 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48875 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F11098 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299791 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335724 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.35097 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366222 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297817 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.563 Y55.05 I2.089 J-.345 E.04791 G1 X-3.302 Y55.032 E.00426 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.792 Y54.019 E.00447 G1 X-1.676 Y53.784 E.00426 G1 X-1.592 Y53.537 E.00426 G1 X-1.539 Y53.274 E.00436 G1 X-1.52 Y53 E.00447 G1 X-1.537 Y52.739 E.00426 G1 X-1.59 Y52.469 E.00447 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.94 Y51.757 E.00426 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.95 E.00436 G1 X-3.838 Y50.968 E.00436 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.02 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11098 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366216 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335722 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242553 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.567 Y51.022 E.00436 G1 X-17.814 Y51.106 E.00426 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.808 Y54.896 E.00436 G1 X-17.561 Y54.98 E.00426 G1 X-17.304 Y55.031 E.00426 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.604 J-1.97 E.00877 ;WIDTH:0.299782 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335719 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357044 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z20.6 F30000 G1 X-39.352 Y-10.052 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.799 E.75457 G1 X-39.352 Y-32.799 E.01313 G1 X-39.352 Y-10.092 E.75325 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.207 E.78158 G1 X-38.945 Y-33.207 E.04014 G1 X-38.945 Y-9.685 E.78025 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-33.642 E.75071 G1 X-38.51 Y-33.642 E.06391 G1 X-38.51 Y-9.25 E.74948 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z20.6 F30000 G1 X-39.352 Y-47.948 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-39.352 Y-39.201 E.29017 G1 X-39.748 Y-39.201 E.01313 G1 X-39.748 Y-47.948 E.29017 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X-38.945 Y-38.793 E.31717 G1 X-40.155 Y-38.793 E.04014 G1 X-40.155 Y-48.355 E.31717 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X-38.51 Y-38.358 E.32053 G1 X-40.59 Y-38.358 E.06391 G1 X-40.59 Y-48.79 E.32053 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.542 Y-46.79 ;WIPE_END G1 X-45.289 Y-50.36 Z20.6 F30000 G1 X-51.352 Y-53.568 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-51.352 Y-52.052 E.05028 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.568 E.05028 G1 X-51.392 Y-53.568 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-53.975 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X-50.945 Y-51.645 E.07729 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-53.975 E.07729 G1 X-50.985 Y-53.975 E.03881 G1 X-50.51 Y-54.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X-50.51 Y-51.21 E.09832 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.41 E.09832 G1 X-50.55 Y-54.41 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.525 Y-52.41 ;WIPE_END G1 X-51.352 Y-58.432 Z20.6 F30000 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11098 G1 X-51.748 Y-58.432 E.01313 G1 X-51.748 Y-59.948 E.05028 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.472 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-58.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11098 G1 X-52.155 Y-58.025 E.04014 G1 X-52.155 Y-60.355 E.07729 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-58.065 E.07596 G1 X-50.51 Y-57.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11098 G1 X-52.59 Y-57.59 E.06391 G1 X-52.59 Y-60.79 E.09832 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.63 E.09709 ;LAYER_CHANGE ;Z:20.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;20.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.592 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.8 I-.582 J1.069 P1 F30000 G1 X50 Y-1.737 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G3 X50.102 Y-1.733 I-.013 J1.726 E.00339 G3 X48.551 Y-.968 I-.108 J1.736 E.30239 G3 X49.96 Y-1.736 I1.436 J.957 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G3 X50.142 Y-2.138 I.001 J2.147 E.00471 G1 X50.42 Y-2.111 E.00927 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.983 E.25037 G1 X49.997 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X50 Y-2.589 E.00009 G1 X50.184 Y-2.571 E.0057 G1 X50.505 Y-2.539 E.0099 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.957 Y-2.585 E.01428 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.184 Y-2.571 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.877 ;WIPE_END G1 X49.829 Y-.563 Z20.8 F30000 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11216 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F11216 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11216 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11216 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X46.616 Y-6.608 Z20.8 F30000 G1 X30.752 Y-58.392 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X30.752 Y-59.948 E.0516 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.392 E.0516 G1 X30.792 Y-58.392 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.985 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X30.345 Y-60.355 E.07861 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.985 E.07861 G1 X30.385 Y-57.985 E.03881 G1 X29.91 Y-57.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X29.91 Y-60.79 E.09955 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.55 E.09955 G1 X29.95 Y-57.55 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.925 Y-59.55 ;WIPE_END G1 X30.752 Y-53.608 Z20.8 F30000 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X31.148 Y-53.608 E.01313 G1 X31.148 Y-52.052 E.0516 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.568 E.05027 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.015 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X31.555 Y-54.015 E.04014 G1 X31.555 Y-51.645 E.07861 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-53.975 E.07728 G1 X29.91 Y-54.45 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X31.99 Y-54.45 E.06391 G1 X31.99 Y-51.21 E.09955 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.41 E.09832 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.448 ;WIPE_END G1 X25.067 Y-51.068 Z20.8 F30000 G1 X18.752 Y-47.948 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-39.094 E.29371 G1 X18.752 Y-39.094 E.01313 G1 X18.752 Y-47.908 E.29239 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.687 E.32072 G1 X18.345 Y-38.687 E.04014 G1 X18.345 Y-48.315 E.31939 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-38.988 E.28183 G1 X19.99 Y-38.252 E.02262 G1 X19.253 Y-38.252 E.02265 G1 X18.647 Y-38.252 E.01862 G1 X17.91 Y-38.252 E.02265 G1 X17.91 Y-38.988 E.02262 G1 X17.91 Y-48.12 E.2806 G1 X17.91 Y-48.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z20.8 F30000 G1 X18.752 Y-10.052 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X18.752 Y-32.906 E.75812 G1 X19.148 Y-32.906 E.01313 G1 X19.148 Y-10.052 E.75812 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X18.345 Y-33.313 E.78513 G1 X19.555 Y-33.313 E.04014 G1 X19.555 Y-9.645 E.78513 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-33.012 E.71201 G1 X17.91 Y-33.748 E.02262 G1 X18.647 Y-33.748 E.02265 G1 X19.253 Y-33.748 E.01862 G1 X19.99 Y-33.748 E.02265 G1 X19.99 Y-33.012 E.02262 G1 X19.99 Y-9.84 E.71201 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z20.8 F30000 G1 X-2.945 Y22.045 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z20.8 F30000 G1 X-5.288 Y52.704 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-5.263 Y52.546 E.0053 G3 X-4.238 Y51.387 I1.683 J.454 E.05318 G3 X-3.64 Y51.258 I.689 J1.751 E.0204 G3 X-5.308 Y52.771 I.061 J1.743 E.28222 G1 X-5.299 Y52.743 E.00099 G1 X-4.861 Y52.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X-4.843 Y52.659 E.00404 G3 X-3.909 Y51.734 I1.264 J.342 E.0423 G3 X-3.611 Y51.692 I.308 J1.11 E.00927 G3 X-4.877 Y52.828 I.032 J1.309 E.19592 G1 X-4.876 Y52.826 E.00006 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.843 Y52.659 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.611 Y51.692 G1 X-3.453 Y51.699 ;WIPE_END G1 X-11.081 Y51.954 Z20.8 F30000 G1 X-15.533 Y52.104 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-15.527 Y52.132 E.00096 G3 X-17.698 Y51.387 I-1.512 J.87 E.28049 G3 X-17.1 Y51.258 I.689 J1.751 E.0204 G3 X-15.652 Y51.943 I.061 J1.744 E.05518 G1 X-15.557 Y52.072 E.00532 G1 X-15.904 Y52.35 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G3 X-17.369 Y51.734 I-1.135 J.65 E.20008 G3 X-17.071 Y51.692 I.308 J1.11 E.00927 G3 X-15.924 Y52.315 I.032 J1.308 E.042 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.298 Y54.083 ;WIPE_END G1 X-8.743 Y52.995 Z20.8 F30000 G1 X-5.91 Y52.587 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-5.744 Y52.099 E.01708 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-5.744 Y53.901 I-.307 J2.333 E.32703 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G3 X-4.932 Y50.568 I2.707 J.815 E.06611 G3 X-3.534 Y50.213 I1.392 J2.55 E.0448 G3 X-6.241 Y53.79 I-.036 J2.786 E.37774 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F11216 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350968 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387468 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366222 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.29782 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11216 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366212 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335717 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242553 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.567 Y51.022 E.00436 G1 X-17.814 Y51.106 E.00426 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.605 J-1.97 E.00877 ;WIDTH:0.299787 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335723 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357047 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z20.8 F30000 G1 X-39.352 Y-10.052 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-32.906 E.75812 G1 X-39.352 Y-32.906 E.01313 G1 X-39.352 Y-10.092 E.75679 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.313 E.78513 G1 X-38.945 Y-33.313 E.04014 G1 X-38.945 Y-9.685 E.7838 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-33.012 E.71201 G1 X-40.59 Y-33.748 E.02262 G1 X-39.853 Y-33.748 E.02265 G1 X-39.247 Y-33.748 E.01862 G1 X-38.51 Y-33.748 E.02265 G1 X-38.51 Y-33.012 E.02262 G1 X-38.51 Y-9.88 E.71078 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.214 Y-16.838 Z20.8 F30000 G1 X-39.352 Y-39.094 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-39.748 Y-39.094 E.01313 G1 X-39.748 Y-47.948 E.29371 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-39.134 E.29239 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-38.687 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X-40.155 Y-38.687 E.04014 G1 X-40.155 Y-48.355 E.32072 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-38.727 E.31939 G1 X-38.51 Y-38.252 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X-39.247 Y-38.252 E.02265 G1 X-39.853 Y-38.252 E.01862 G1 X-40.59 Y-38.252 E.02265 G1 X-40.59 Y-38.988 E.02262 G1 X-40.59 Y-48.16 E.28183 G1 X-40.59 Y-48.79 E.01936 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-38.988 E.28183 G1 X-38.51 Y-38.292 E.02139 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-38.253 ;WIPE_END G1 X-44.912 Y-44.488 Z20.8 F30000 G1 X-51.352 Y-53.608 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-51.352 Y-52.052 E.0516 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.608 E.0516 G1 X-51.392 Y-53.608 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.015 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X-50.945 Y-51.645 E.07861 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.015 E.07861 G1 X-50.985 Y-54.015 E.03881 G1 X-50.51 Y-54.45 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X-50.51 Y-51.21 E.09955 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.45 E.09955 G1 X-50.55 Y-54.45 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.525 Y-52.45 ;WIPE_END G1 X-51.352 Y-58.392 Z20.8 F30000 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11216 G1 X-51.748 Y-58.392 E.01313 G1 X-51.748 Y-59.948 E.0516 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.432 E.05027 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.985 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11216 G1 X-52.155 Y-57.985 E.04014 G1 X-52.155 Y-60.355 E.07861 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-58.025 E.07728 G1 X-50.51 Y-57.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11216 G1 X-52.59 Y-57.55 E.06391 G1 X-52.59 Y-60.79 E.09955 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.59 E.09832 ;LAYER_CHANGE ;Z:20.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;20.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.552 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z21 I-.582 J1.069 P1 F30000 G1 X50 Y-1.737 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G3 X50.099 Y-1.733 I-.013 J1.726 E.00327 G3 X48.551 Y-.968 I-.105 J1.736 E.30252 G3 X49.96 Y-1.737 I1.436 J.958 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G3 X50.138 Y-2.138 I.001 J2.147 E.0046 G1 X50.42 Y-2.111 E.00938 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.984 E.25038 G1 X49.997 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X50 Y-2.589 E.0001 G1 X50.181 Y-2.571 E.00559 G1 X50.505 Y-2.539 E.01 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.957 Y-2.585 E.01427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.181 Y-2.571 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.877 ;WIPE_END G1 X49.829 Y-.563 Z21 F30000 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11391 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F11391 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11391 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11391 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.715 Y-.39 G1 X48.878 Y-.749 G1 X48.923 Y-.797 ;WIPE_END G1 X46.625 Y-8.075 Z21 F30000 G1 X30.752 Y-58.353 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X30.752 Y-59.948 E.05292 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.353 E.05292 G1 X30.792 Y-58.353 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.946 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X30.345 Y-60.355 E.07993 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.946 E.07993 G1 X30.385 Y-57.946 E.03881 G1 X29.91 Y-57.511 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X29.91 Y-60.79 E.10077 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-57.511 E.10077 G1 X29.95 Y-57.511 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.926 Y-59.51 ;WIPE_END G1 X30.752 Y-53.647 Z21 F30000 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X31.148 Y-53.647 E.01313 G1 X31.148 Y-52.052 E.05292 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.607 E.05159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.054 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X31.555 Y-54.054 E.04014 G1 X31.555 Y-51.645 E.07993 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.014 E.0786 G1 X29.91 Y-54.489 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X31.99 Y-54.489 E.06391 G1 X31.99 Y-51.21 E.10077 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-54.449 E.09954 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.488 ;WIPE_END G1 X25.075 Y-51.091 Z21 F30000 G1 X18.752 Y-47.948 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.943 E.29871 G1 X18.752 Y-38.943 E.01313 G1 X18.752 Y-47.908 E.29738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.536 E.32572 G1 X18.345 Y-38.536 E.04014 G1 X18.345 Y-48.315 E.32439 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-38.882 E.28509 G1 F7800 G1 X19.99 Y-38.101 E.024 G1 X19.209 Y-38.101 E.024 G1 X18.691 Y-38.101 E.01592 G1 X17.91 Y-38.101 E.024 G1 X17.91 Y-38.882 E.024 G1 F11391 G1 X17.91 Y-48.12 E.28386 G1 X17.91 Y-48.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z21 F30000 G1 X18.752 Y-10.052 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X18.752 Y-33.057 E.76311 G1 X19.148 Y-33.057 E.01313 G1 X19.148 Y-10.052 E.76311 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X18.345 Y-33.464 E.79012 G1 X19.555 Y-33.464 E.04014 G1 X19.555 Y-9.645 E.79012 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-33.118 E.71527 G1 F7800 G1 X17.91 Y-33.899 E.024 G1 X18.691 Y-33.899 E.024 G1 X19.209 Y-33.899 E.01592 G1 X19.99 Y-33.899 E.024 G1 X19.99 Y-33.118 E.024 G1 F11391 G1 X19.99 Y-9.84 E.71527 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z21 F30000 G1 X-2.945 Y22.045 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z21 F30000 G1 X-5.288 Y52.703 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-5.263 Y52.546 E.00525 G3 X-4.238 Y51.387 I1.684 J.455 E.05319 G3 X-3.636 Y51.258 I.689 J1.754 E.02051 G3 X-5.308 Y52.771 I.058 J1.744 E.28231 G1 X-5.299 Y52.741 E.00104 G1 X-4.861 Y52.788 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X-4.842 Y52.659 E.00399 G3 X-3.909 Y51.734 I1.264 J.341 E.04228 G3 X-3.608 Y51.692 I.311 J1.123 E.00938 G3 X-4.876 Y52.828 I.029 J1.308 E.19573 G1 X-4.875 Y52.825 E.00009 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.842 Y52.659 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.608 Y51.692 G1 X-3.452 Y51.699 ;WIPE_END G1 X-11.08 Y51.955 Z21 F30000 G1 X-15.532 Y52.105 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-15.526 Y52.132 E.0009 G3 X-17.698 Y51.387 I-1.512 J.87 E.2805 G3 X-17.096 Y51.258 I.689 J1.754 E.02051 G3 X-15.652 Y51.943 I.058 J1.744 E.05507 G1 X-15.556 Y52.073 E.00538 G1 X-15.903 Y52.349 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G3 X-17.369 Y51.734 I-1.135 J.651 E.20018 G3 X-17.068 Y51.692 I.311 J1.123 E.00938 G3 X-15.923 Y52.315 I.029 J1.308 E.0419 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.298 Y54.083 ;WIPE_END G1 X-8.743 Y52.995 Z21 F30000 G1 X-5.91 Y52.587 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-5.744 Y52.099 E.01708 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-5.744 Y53.901 I-.307 J2.333 E.32703 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G3 X-3.538 Y50.213 I2.668 J.782 E.11092 G3 X-6.241 Y53.79 I-.033 J2.785 E.37763 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.672 J-.79 E.48879 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242553 G1 F11391 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.29979 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335724 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350971 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387471 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366227 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.33573 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297825 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242553 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.033 Y54.978 E.00436 G1 X-2.786 Y54.894 E.00426 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11391 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.36622 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335726 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297823 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242553 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.567 Y51.022 E.00436 G1 X-17.814 Y51.106 E.00426 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.604 J-1.97 E.00877 ;WIDTH:0.299789 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335726 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357051 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z21 F30000 G1 X-39.352 Y-10.052 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.057 E.76311 G1 X-39.352 Y-33.057 E.01313 G1 X-39.352 Y-10.092 E.76179 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.464 E.79012 G1 X-38.945 Y-33.464 E.04014 M73 P90 R8 G1 X-38.945 Y-9.685 E.78879 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-33.118 E.71527 G1 F7800 G1 X-40.59 Y-33.899 E.024 G1 X-39.809 Y-33.899 E.024 G1 X-39.291 Y-33.899 E.01592 G1 X-38.51 Y-33.899 E.024 G1 X-38.51 Y-33.118 E.024 G1 F11391 G1 X-38.51 Y-9.88 E.71404 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z21 F30000 G1 X-39.352 Y-47.948 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-39.352 Y-38.943 E.29871 G1 X-39.748 Y-38.943 E.01313 G1 X-39.748 Y-47.948 E.29871 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X-38.945 Y-38.536 E.32572 G1 X-40.155 Y-38.536 E.04014 G1 X-40.155 Y-48.355 E.32572 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-38.882 E.28509 G1 F7800 G1 X-38.51 Y-38.101 E.024 G1 X-39.291 Y-38.101 E.024 G1 X-39.809 Y-38.101 E.01592 G1 X-40.59 Y-38.101 E.024 G1 X-40.59 Y-38.882 E.024 G1 F11391 G1 X-40.59 Y-48.16 E.28509 G1 X-40.59 Y-48.79 E.01936 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.271 Y-50.392 Z21 F30000 G1 X-51.352 Y-53.647 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-51.352 Y-52.052 E.05292 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.647 E.05292 G1 X-51.392 Y-53.647 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.054 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X-50.945 Y-51.645 E.07993 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.054 E.07993 G1 X-50.985 Y-54.054 E.03881 G1 X-50.51 Y-54.489 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X-50.51 Y-51.21 E.10077 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-54.489 E.10077 G1 X-50.55 Y-54.489 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.526 Y-52.49 ;WIPE_END G1 X-51.352 Y-58.353 Z21 F30000 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11391 G1 X-51.748 Y-58.353 E.01313 G1 X-51.748 Y-59.948 E.05292 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.393 E.05159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.946 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11391 G1 X-52.155 Y-57.946 E.04014 G1 X-52.155 Y-60.355 E.07993 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.986 E.0786 G1 X-50.51 Y-57.511 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11391 G1 X-52.59 Y-57.511 E.06391 G1 X-52.59 Y-60.79 E.10077 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-57.551 E.09954 ;LAYER_CHANGE ;Z:20.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;20.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.512 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z21.2 I-.582 J1.069 P1 F30000 G1 X50 Y-1.737 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G3 X50.095 Y-1.733 I-.013 J1.726 E.00316 G3 X48.551 Y-.968 I-.102 J1.736 E.30264 G3 X49.96 Y-1.737 I1.436 J.958 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G3 X50.135 Y-2.139 I.001 J2.147 E.00448 G1 X50.42 Y-2.111 E.00949 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.822 J-1.984 E.25038 G1 X49.997 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G1 X50 Y-2.589 E.0001 G1 X50.178 Y-2.571 E.00549 G1 X50.505 Y-2.539 E.01011 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.957 Y-2.585 E.01426 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.178 Y-2.571 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.877 ;WIPE_END G1 X50.633 Y1.184 Z21.2 F30000 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11596 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11596 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F11596 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11596 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.597 Y-6.682 Z21.2 F30000 G1 X30.752 Y-58.236 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X30.752 Y-59.948 E.0568 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.236 E.0568 G1 X30.792 Y-58.236 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.829 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X30.345 Y-60.355 E.0838 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.829 E.0838 G1 X30.385 Y-57.829 E.03881 G1 X29.91 Y-57.394 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10920 G1 X29.91 Y-58.141 E.02295 G1 F11596 G1 X29.91 Y-60.16 E.06204 G1 X29.91 Y-60.79 E.01936 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-60.16 E.01936 G1 X31.99 Y-58.141 E.06204 G1 F10920 G1 X31.99 Y-57.394 E.02295 G1 X31.243 Y-57.394 E.02295 G1 X30.697 Y-57.394 E.01678 G1 X29.95 Y-57.394 E.02295 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F10920 G1 X29.926 Y-59.394 ;WIPE_END G1 X30.752 Y-53.764 Z21.2 F30000 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X31.148 Y-53.764 E.01313 G1 X31.148 Y-52.052 E.0568 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.724 E.05547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.171 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X31.555 Y-54.171 E.04014 G1 X31.555 Y-51.645 E.0838 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.131 E.08248 G1 X29.91 Y-54.606 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10920 G1 X30.657 Y-54.606 E.02295 G1 X31.243 Y-54.606 E.01801 G1 X31.99 Y-54.606 E.02295 G1 X31.99 Y-53.859 E.02295 G1 F11596 G1 X31.99 Y-51.84 E.06204 G1 X31.99 Y-51.21 E.01936 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-51.84 E.01936 G1 X29.91 Y-53.859 E.06204 G1 X29.91 Y-54.566 E.02172 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P90 R7 ;WIPE_START G1 F12000 G1 X31.91 Y-54.605 ;WIPE_END G1 X25.099 Y-51.159 Z21.2 F30000 G1 X18.752 Y-47.948 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.779 E.30415 G1 X18.752 Y-38.779 E.01313 G1 X18.752 Y-47.908 E.30283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.372 E.33116 G1 X18.345 Y-38.372 E.04014 G1 X18.345 Y-48.315 E.32983 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-38.731 E.28973 G1 F6600 G1 X19.99 Y-37.937 E.0244 G1 X19.196 Y-37.937 E.0244 G1 X18.704 Y-37.937 E.01512 G1 X17.91 Y-37.937 E.0244 G1 X17.91 Y-38.731 E.0244 G1 F11596 G1 X17.91 Y-48.12 E.2885 G1 X17.91 Y-48.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z21.2 F30000 G1 X18.752 Y-10.052 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X18.752 Y-33.221 E.76856 G1 X19.148 Y-33.221 E.01313 G1 X19.148 Y-10.052 E.76856 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X18.345 Y-33.628 E.79557 G1 X19.555 Y-33.628 E.04014 G1 X19.555 Y-9.645 E.79557 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-33.269 E.71991 G1 F6600 G1 X17.91 Y-34.063 E.0244 G1 X18.704 Y-34.063 E.0244 G1 X19.196 Y-34.063 E.01512 G1 X19.99 Y-34.063 E.0244 G1 X19.99 Y-33.269 E.0244 G1 F11596 G1 X19.99 Y-9.84 E.71991 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z21.2 F30000 G1 X-2.945 Y22.045 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z21.2 F30000 G1 X-5.288 Y52.703 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-5.26 Y52.574 E.00439 G3 X-3.798 Y51.269 I1.694 J.426 E.06902 G3 X-3.57 Y54.746 I.224 J1.732 E.18932 G3 X-5.298 Y52.773 I.004 J-1.747 E.09844 G1 X-5.294 Y52.743 E.00099 G1 X-4.853 Y52.784 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G1 X-4.839 Y52.683 E.00315 G3 X-3.741 Y51.701 I1.272 J.317 E.04806 G3 X-3.57 Y54.31 I.168 J1.299 E.13159 G3 X-4.878 Y53 I.003 J-1.311 E.06316 G1 X-4.858 Y52.824 E.00544 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.839 Y52.683 G1 X-4.781 Y52.5 G1 X-4.61 Y52.202 G1 X-4.497 Y52.073 G1 X-4.244 Y51.877 G1 X-4.073 Y51.79 G1 X-3.741 Y51.701 G1 X-3.446 Y51.7 ;WIPE_END G1 X-11.074 Y51.957 Z21.2 F30000 G1 X-15.531 Y52.107 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-15.521 Y52.128 E.0008 G3 X-17.03 Y54.746 I-1.513 J.872 E.12115 G3 X-17.258 Y51.269 I.005 J-1.747 E.17409 G3 X-15.647 Y51.939 I.224 J1.732 E.06061 G1 X-15.554 Y52.074 E.00545 G1 X-15.897 Y52.346 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G3 X-17.03 Y54.31 I-1.135 J.654 E.08421 G3 X-17.201 Y51.701 I.004 J-1.311 E.12099 G3 X-15.918 Y52.312 I.168 J1.299 E.04616 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.297 Y54.083 ;WIPE_END G1 X-8.738 Y53.028 Z21.2 F30000 G1 X-5.991 Y52.645 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-5.93 Y52.645 E.00203 G1 X-5.744 Y52.099 E.01912 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-5.744 Y53.901 I-.307 J2.333 E.32703 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-6.031 Y52.645 E.28658 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G3 X-4.939 Y50.572 I2.71 J.817 E.06587 G3 X-3.541 Y50.212 I1.403 J2.561 E.04481 G3 X-6.241 Y53.79 I-.028 J2.787 E.37801 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48887 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.543 Y52.454 F30000 ;TYPE:Gap infill ;WIDTH:0.242661 G1 F11596 G1 X-5.559 Y52.502 E.00082 G2 X-5.622 Y52.738 I3.555 J1.071 E.00397 ;WIDTH:0.299788 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350968 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366225 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335728 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297822 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242661 G2 X-3.296 Y55.031 I2.079 J-.338 E.05229 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.545 Y54.775 E.00447 G1 X-2.317 Y54.622 E.00447 G1 X-2.121 Y54.449 E.00426 G1 X-1.948 Y54.253 E.00426 G1 X-1.795 Y54.025 E.00447 G1 X-1.674 Y53.778 E.00447 G1 X-1.59 Y53.531 E.00426 G1 X-1.539 Y53.274 E.00426 G1 X-1.52 Y53 E.00447 G1 X-1.538 Y52.732 E.00436 G1 X-1.589 Y52.476 E.00426 G1 X-1.676 Y52.216 E.00447 G1 X-1.798 Y51.97 E.00447 G1 X-1.944 Y51.752 E.00426 G1 X-2.116 Y51.555 E.00426 G1 X-2.322 Y51.374 E.00447 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.303 Y50.967 E.00448 G2 X-5.463 Y52.216 I-.257 J2.047 E.04361 G1 X-5.53 Y52.417 E.00344 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11596 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366218 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335722 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242634 G2 X-16.777 Y50.966 I-2.09 J.34 E.04376 G2 X-15.048 Y53.524 I-.25 J2.033 E.15251 G2 X-14.978 Y53.262 I-3.958 J-1.193 E.00441 ;WIDTH:0.299782 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335717 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357043 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z21.2 F30000 G1 X-39.352 Y-10.052 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.221 E.76856 G1 X-39.352 Y-33.221 E.01313 G1 X-39.352 Y-10.092 E.76723 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.628 E.79557 G1 X-38.945 Y-33.628 E.04014 G1 X-38.945 Y-9.685 E.79424 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-33.269 E.71991 G1 F6600 G1 X-40.59 Y-34.063 E.0244 G1 X-39.796 Y-34.063 E.0244 G1 X-39.304 Y-34.063 E.01512 G1 X-38.51 Y-34.063 E.0244 G1 X-38.51 Y-33.269 E.0244 G1 F11596 G1 X-38.51 Y-9.88 E.71868 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z21.2 F30000 G1 X-39.352 Y-47.948 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-39.352 Y-38.779 E.30415 G1 X-39.748 Y-38.779 E.01313 G1 X-39.748 Y-47.948 E.30415 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X-38.945 Y-38.372 E.33116 G1 X-40.155 Y-38.372 E.04014 G1 X-40.155 Y-48.355 E.33116 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11596 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-38.731 E.28973 G1 F6600 G1 X-38.51 Y-37.937 E.0244 G1 X-39.304 Y-37.937 E.0244 G1 X-39.796 Y-37.937 E.01512 G1 X-40.59 Y-37.937 E.0244 G1 X-40.59 Y-38.731 E.0244 G1 F11596 G1 X-40.59 Y-48.16 E.28973 G1 X-40.59 Y-48.79 E.01936 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.246 Y-50.44 Z21.2 F30000 G1 X-51.352 Y-53.764 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-51.352 Y-52.052 E.0568 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.764 E.0568 G1 X-51.392 Y-53.764 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.171 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X-50.945 Y-51.645 E.0838 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.171 E.0838 G1 X-50.985 Y-54.171 E.03881 G1 X-50.51 Y-54.606 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10920 G1 X-50.51 Y-53.859 E.02295 G1 F11596 G1 X-50.51 Y-51.84 E.06204 G1 X-50.51 Y-51.21 E.01936 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-51.84 E.01936 G1 X-52.59 Y-53.859 E.06204 G1 F10920 G1 X-52.59 Y-54.606 E.02295 G1 X-51.843 Y-54.606 E.02295 G1 X-51.297 Y-54.606 E.01678 G1 X-50.55 Y-54.606 E.02295 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F10920 G1 X-50.526 Y-52.606 ;WIPE_END G1 X-51.352 Y-58.236 Z21.2 F30000 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11596 G1 X-51.748 Y-58.236 E.01313 G1 X-51.748 Y-59.948 E.0568 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.276 E.05547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.829 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11596 G1 X-52.155 Y-57.829 E.04014 G1 X-52.155 Y-60.355 E.0838 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.869 E.08248 G1 X-50.51 Y-57.394 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10920 G1 X-51.257 Y-57.394 E.02295 G1 X-51.843 Y-57.394 E.01801 G1 X-52.59 Y-57.394 E.02295 G1 X-52.59 Y-58.141 E.02295 G1 F11596 G1 X-52.59 Y-60.16 E.06204 G1 X-52.59 Y-60.79 E.01936 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-60.16 E.01936 G1 X-50.51 Y-58.141 E.06204 G1 X-50.51 Y-57.434 E.02172 ;LAYER_CHANGE ;Z:21 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;21 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.395 ;WIPE_END ;AFTER_LAYER_CHANGE ;21 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z21.4 I-.581 J1.069 P1 F30000 G1 X50 Y-1.737 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G3 X50.092 Y-1.734 I-.013 J1.727 E.00305 G3 X48.551 Y-.968 I-.098 J1.736 E.30277 G3 X49.96 Y-1.737 I1.436 J.958 E.05537 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G3 X50.132 Y-2.139 I.005 J2.146 E.00437 G1 X50.42 Y-2.111 E.0096 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.818 J-1.984 E.25003 G1 X49.996 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00011 G1 X50.174 Y-2.572 E.00538 G1 X50.505 Y-2.539 E.01021 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.957 Y-2.585 E.01425 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.174 Y-2.572 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.877 ;WIPE_END G1 X50.633 Y-1.184 Z21.4 F30000 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13430 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F13430 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442575 G1 F13430 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F13430 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.551 Y-.192 ;WIPE_END G1 X48.082 Y-7.414 Z21.4 F30000 G1 X30.752 Y-58.102 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X30.752 Y-59.948 E.06123 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-58.102 E.06123 G1 X30.792 Y-58.102 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-57.695 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X30.345 Y-60.355 E.08824 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.695 E.08824 G1 X30.385 Y-57.695 E.03881 G1 X29.91 Y-57.26 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9360 G1 X29.91 Y-58.024 E.02348 G1 F12000 G1 X29.91 Y-60.16 E.06563 G1 X29.91 Y-60.79 E.01936 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-60.16 E.01936 G1 X31.99 Y-58.024 E.06563 G1 F9360 G1 X31.99 Y-57.26 E.02348 G1 X31.226 Y-57.26 E.02348 G1 X30.714 Y-57.26 E.01573 G1 X29.95 Y-57.26 E.02348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F9360 G1 X29.927 Y-59.26 ;WIPE_END G1 X30.752 Y-53.898 Z21.4 F30000 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X31.148 Y-53.898 E.01313 G1 X31.148 Y-52.052 E.06123 G1 X30.752 Y-52.052 E.01313 G1 X30.752 Y-53.858 E.0599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-54.305 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X31.555 Y-54.305 E.04014 G1 X31.555 Y-51.645 E.08824 G1 X30.345 Y-51.645 E.04014 G1 X30.345 Y-54.265 E.08691 G1 X29.91 Y-54.74 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9360 G1 X30.674 Y-54.74 E.02348 G1 X31.226 Y-54.74 E.01696 G1 X31.99 Y-54.74 E.02348 G1 X31.99 Y-53.976 E.02348 G1 F12000 G1 X31.99 Y-51.84 E.06563 G1 X31.99 Y-51.21 E.01936 G1 X29.91 Y-51.21 E.06391 G1 X29.91 Y-51.84 E.01936 G1 X29.91 Y-53.976 E.06563 G1 X29.91 Y-54.7 E.02225 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-54.738 ;WIPE_END G1 X25.127 Y-51.238 Z21.4 F30000 G1 X18.752 Y-47.948 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.541 E.31204 G1 X18.752 Y-38.541 E.01313 G1 X18.752 Y-47.908 E.31072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-38.134 E.33905 G1 X18.345 Y-38.134 E.04014 G1 X18.345 Y-48.315 E.33772 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-38.567 E.29477 G1 F2100 G1 X19.99 Y-37.699 E.02667 G1 X17.91 Y-37.699 E.06391 M106 S255 G1 X17.91 Y-38.567 E.02667 G1 F12000 G1 X17.91 Y-48.12 E.29354 G1 X17.91 Y-48.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z21.4 F30000 G1 X18.752 Y-10.052 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X18.752 Y-33.459 E.77645 G1 X19.148 Y-33.459 E.01313 G1 X19.148 Y-10.052 E.77645 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X18.345 Y-33.866 E.80346 G1 X19.555 Y-33.866 E.04014 G1 X19.555 Y-9.645 E.80346 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-33.433 E.72495 G1 F2100 G1 X17.91 Y-34.301 E.02667 G1 X19.99 Y-34.301 E.06391 M106 S255 G1 X19.99 Y-33.433 E.02667 G1 F12000 G1 X19.99 Y-9.84 E.72495 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z21.4 F30000 G1 X-2.945 Y22.045 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z21.4 F30000 G1 X-5.289 Y52.712 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-5.261 Y52.569 E.00483 G3 X-4.022 Y51.313 I1.691 J.429 E.06136 G1 X-3.798 Y51.269 E.00758 G3 X-5.3 Y52.772 I.228 J1.73 E.28779 G1 X-5.296 Y52.751 E.00071 G1 X-4.862 Y52.801 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.781 Y52.5 E.00958 G3 X-3.909 Y51.734 I1.21 J.499 E.03693 G1 X-3.741 Y51.701 E.00527 G3 X-4.87 Y52.84 I.171 J1.298 E.19969 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.781 Y52.5 G1 X-4.705 Y52.345 G1 X-4.498 Y52.074 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.741 Y51.701 G1 X-3.464 Y51.701 ;WIPE_END G1 X-11.092 Y51.958 Z21.4 F30000 G1 X-15.53 Y52.108 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-15.519 Y52.127 E.00073 G3 X-17.482 Y51.313 I-1.512 J.871 E.28779 G1 X-17.258 Y51.269 E.00758 G3 X-15.645 Y51.937 I.228 J1.73 E.06065 G1 X-15.552 Y52.075 E.00552 G1 X-15.896 Y52.345 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-17.369 Y51.734 I-1.134 J.653 E.20003 G1 X-17.201 Y51.701 E.00527 G3 X-15.916 Y52.311 I.171 J1.298 E.0462 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.819 Y53.501 G1 X-15.98 Y53.782 G1 X-16.102 Y53.926 G1 X-16.301 Y54.078 ;WIPE_END G1 X-8.741 Y53.027 Z21.4 F30000 G1 X-5.991 Y52.645 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-5.93 Y52.645 E.00203 G1 X-5.744 Y52.099 E.01912 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-5.744 Y53.901 I-.307 J2.333 E.32703 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-6.031 Y52.645 E.28658 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-3.545 Y50.212 I2.688 J.809 E.11051 G3 X-6.241 Y53.79 I-.023 J2.788 E.37833 G1 X-14.359 Y53.79 E.24942 G3 X-19.717 Y52.255 I-2.672 J-.794 E.26737 G3 X-14.359 Y52.21 I2.685 J.75 E.22106 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.544 Y52.455 F30000 ;TYPE:Gap infill ;WIDTH:0.242665 G1 F12000 G1 X-5.558 Y52.498 E.00073 G2 X-5.622 Y52.738 I3.621 J1.091 E.00404 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.33572 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350967 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387467 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366222 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297819 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242665 G2 X-3.831 Y55.033 I2.09 J-.34 E.04363 G1 X-3.57 Y55.05 E.00426 G1 X-3.302 Y55.032 E.00436 G1 X-3.039 Y54.98 E.00436 G1 X-2.786 Y54.894 E.00436 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.12 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.795 Y54.025 E.00436 G1 X-1.676 Y53.784 E.00436 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.215 E.00436 G2 X-5.463 Y52.216 I-1.894 J.791 E.07851 G1 X-5.531 Y52.417 E.00346 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F12000 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366215 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335721 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297818 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242643 G2 X-16.776 Y50.966 I-2.09 J.34 E.04374 G2 X-15.048 Y53.524 I-.252 J2.033 E.15253 G2 X-14.978 Y53.262 I-3.955 J-1.192 E.00441 ;WIDTH:0.299785 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335723 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357047 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z21.4 F30000 G1 X-39.352 Y-10.052 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.459 E.77645 G1 X-39.352 Y-33.459 E.01313 G1 X-39.352 Y-10.092 E.77512 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-33.866 E.80346 G1 X-38.945 Y-33.866 E.04014 G1 X-38.945 Y-9.685 E.80213 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-33.433 E.72495 G1 F2100 G1 X-40.59 Y-34.301 E.02667 G1 X-38.51 Y-34.301 E.06391 M106 S255 G1 X-38.51 Y-33.433 E.02667 G1 F12000 G1 X-38.51 Y-9.88 E.72372 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z21.4 F30000 G1 X-39.352 Y-47.948 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-39.352 Y-38.541 E.31204 G1 X-39.748 Y-38.541 E.01313 G1 X-39.748 Y-47.948 E.31204 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X-38.945 Y-38.134 E.33905 G1 X-40.155 Y-38.134 E.04014 G1 X-40.155 Y-48.355 E.33905 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-38.567 E.29477 G1 F2100 G1 X-38.51 Y-37.699 E.02667 G1 X-40.59 Y-37.699 E.06391 M106 S255 G1 X-40.59 Y-38.567 E.02667 G1 F12000 G1 X-40.59 Y-48.16 E.29477 G1 X-40.59 Y-48.79 E.01936 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.217 Y-50.493 Z21.4 F30000 G1 X-51.352 Y-53.898 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-51.352 Y-52.052 E.06123 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-53.898 E.06123 G1 X-51.392 Y-53.898 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-54.305 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X-50.945 Y-51.645 E.08824 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.305 E.08824 G1 X-50.985 Y-54.305 E.03881 G1 X-50.51 Y-54.74 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9360 G1 X-50.51 Y-53.976 E.02348 G1 F12000 G1 X-50.51 Y-51.84 E.06563 G1 X-50.51 Y-51.21 E.01936 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-51.84 E.01936 G1 X-52.59 Y-53.976 E.06563 G1 F9360 G1 X-52.59 Y-54.74 E.02348 G1 X-51.826 Y-54.74 E.02348 G1 X-51.314 Y-54.74 E.01573 G1 X-50.55 Y-54.74 E.02348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F9360 G1 X-50.527 Y-52.74 ;WIPE_END G1 X-51.352 Y-58.102 Z21.4 F30000 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13430 G1 X-51.748 Y-58.102 E.01313 G1 X-51.748 Y-59.948 E.06123 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-58.142 E.0599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-57.695 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13430 G1 X-52.155 Y-57.695 E.04014 G1 X-52.155 Y-60.355 E.08824 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-57.735 E.08691 G1 X-50.51 Y-57.26 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9360 G1 X-51.274 Y-57.26 E.02348 G1 X-51.826 Y-57.26 E.01696 G1 X-52.59 Y-57.26 E.02348 G1 X-52.59 Y-58.024 E.02348 G1 F12000 G1 X-52.59 Y-60.16 E.06563 G1 X-52.59 Y-60.79 E.01936 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-60.16 E.01936 G1 X-50.51 Y-58.024 E.06563 G1 X-50.51 Y-57.3 E.02225 ;LAYER_CHANGE ;Z:21.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;21.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-57.262 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z21.6 I-.58 J1.07 P1 F30000 G1 X50 Y-1.737 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.088 Y-1.734 I-.012 J1.727 E.00294 G3 X48.551 Y-.968 I-.095 J1.737 E.3029 G3 X49.96 Y-1.737 I1.437 J.958 E.05538 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X50.128 Y-2.139 I.005 J2.146 E.00426 G1 X50.42 Y-2.111 E.00971 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.142 I-.818 J-1.984 E.25003 G1 X49.996 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00012 G1 X50.171 Y-2.572 E.00528 G1 X50.505 Y-2.539 E.01031 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.956 Y-2.585 E.01425 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.171 Y-2.572 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.878 ;WIPE_END G1 X50.127 Y.154 Z21.6 F30000 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442581 G1 F15000 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X46.669 Y-6.624 Z21.6 F30000 G1 X30.752 Y-59.948 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-57.877 E.06869 G1 X30.752 Y-57.877 E.01313 G1 X30.752 Y-59.908 E.06736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-60.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.47 E.09569 G1 X30.345 Y-57.47 E.04014 G1 X30.345 Y-60.315 E.09437 G1 X29.91 Y-60.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-60.16 E.01936 G1 X31.99 Y-57.89 E.06975 G1 F2220 G1 X31.99 Y-57.035 E.02627 G1 X29.91 Y-57.035 E.06391 M106 S255 G1 X29.91 Y-57.89 E.02627 G1 F12000 G1 X29.91 Y-60.12 E.06852 G1 X29.91 Y-60.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-60.788 ;WIPE_END G17 G3 Z21.6 I-1.206 J-.16 P1 F30000 G1 X30.752 Y-52.052 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-54.123 E.06869 G1 X31.148 Y-54.123 E.01313 G1 X31.148 Y-52.052 E.06869 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-54.53 E.09569 G1 X31.555 Y-54.53 E.04014 G1 X31.555 Y-51.645 E.09569 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-51.84 E.01936 G1 X29.91 Y-54.11 E.06975 G1 F2220 G1 X29.91 Y-54.965 E.02627 G1 X31.99 Y-54.965 E.06391 M106 S255 G1 X31.99 Y-54.11 E.02627 G1 F12000 G1 X31.99 Y-51.84 E.06975 G1 X31.99 Y-51.21 E.01936 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.929 Y-53.21 ;WIPE_END G1 X23.023 Y-49.959 Z21.6 F30000 G1 X18.752 Y-47.948 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-38.243 E.32194 G1 X18.752 Y-38.243 E.01313 G1 X18.752 Y-47.908 E.32061 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-37.836 E.34894 G1 X18.345 Y-37.836 E.04014 G1 X18.345 Y-48.315 E.34762 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-38.329 E.30208 G1 F1380 G1 X19.99 Y-37.401 E.02851 G1 X19.062 Y-37.401 E.02851 G1 X18.838 Y-37.401 E.00688 G1 X17.91 Y-37.401 E.02851 M106 S255 G1 X17.91 Y-38.329 E.02851 G1 F12000 G1 X17.91 Y-48.12 E.30085 G1 X17.91 Y-48.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z21.6 F30000 G1 X18.752 Y-10.052 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-33.757 E.78634 G1 X19.148 Y-33.757 E.01313 G1 X19.148 Y-10.052 E.78634 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-34.164 E.81335 G1 X19.555 Y-34.164 E.04014 G1 X19.555 Y-9.645 E.81335 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-33.671 E.73226 G1 F1380 G1 X17.91 Y-34.599 E.02851 G1 X18.838 Y-34.599 E.02851 G1 X19.062 Y-34.599 E.00688 G1 X19.99 Y-34.599 E.02851 M106 S255 G1 X19.99 Y-33.671 E.02851 G1 F12000 G1 X19.99 Y-9.84 E.73226 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z21.6 F30000 G1 X-2.945 Y22.045 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z21.6 F30000 G1 X-5.289 Y52.71 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.26 Y52.565 E.00493 G3 X-4.022 Y51.313 I1.69 J.434 E.06121 G1 X-3.798 Y51.269 E.00758 G3 X-5.3 Y52.772 I.228 J1.73 E.28779 G1 X-5.296 Y52.75 E.00075 G1 X-4.861 Y52.8 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.781 Y52.5 E.00955 G3 X-3.909 Y51.734 I1.21 J.499 E.03692 G1 X-3.741 Y51.701 E.00527 G3 X-4.869 Y52.839 I.171 J1.298 E.19973 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.781 Y52.5 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.741 Y51.701 G1 X-3.463 Y51.701 ;WIPE_END G1 X-11.091 Y51.959 Z21.6 F30000 G1 X-15.529 Y52.11 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.519 Y52.127 E.00067 G3 X-17.482 Y51.313 I-1.512 J.871 E.28779 G1 X-17.258 Y51.269 E.00758 G3 X-15.645 Y51.937 I.228 J1.73 E.06065 G1 X-15.551 Y52.077 E.00558 G1 X-15.896 Y52.345 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-17.369 Y51.734 I-1.134 J.653 E.20003 G1 X-17.201 Y51.701 E.00527 G3 X-15.916 Y52.311 I.171 J1.298 E.0462 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.297 Y54.083 ;WIPE_END G1 X-8.742 Y52.995 Z21.6 F30000 G1 X-5.91 Y52.587 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-5.744 Y53.901 I-.307 J2.333 E.32703 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-3.549 Y50.212 I2.684 J.803 E.11044 G3 X-2.158 Y50.596 I-.061 J2.936 E.04481 G3 X-6.241 Y53.79 I-1.411 J2.403 E.33345 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48897 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.544 Y52.456 F30000 ;TYPE:Gap infill ;WIDTH:0.242588 G1 F12000 G1 X-5.557 Y52.493 E.00064 G2 X-5.622 Y52.738 I3.691 J1.112 E.00412 ;WIDTH:0.29979 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335724 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.35097 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387469 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366222 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335724 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297818 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242588 G2 X-3.831 Y55.033 I2.09 J-.34 E.04361 G1 X-3.57 Y55.05 E.00426 G1 X-3.309 Y55.033 E.00426 G1 X-3.039 Y54.98 E.00447 G1 X-2.786 Y54.894 E.00436 G1 X-2.551 Y54.778 E.00426 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.948 Y54.253 E.00426 G1 X-1.795 Y54.025 E.00447 G1 X-1.676 Y53.784 E.00436 G1 X-1.592 Y53.537 E.00426 G1 X-1.538 Y53.268 E.00447 G1 X-1.52 Y52.993 E.00447 G1 X-1.538 Y52.732 E.00426 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.792 Y51.981 E.00426 G1 X-1.944 Y51.752 E.00447 G1 X-2.125 Y51.546 E.00447 G1 X-2.322 Y51.374 E.00426 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.033 Y51.022 E.00426 G1 X-3.315 Y50.966 E.00467 G2 X-5.463 Y52.216 I-.246 J2.048 E.04339 G1 X-5.531 Y52.418 E.00347 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F12000 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366216 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335722 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.24257 G2 X-16.775 Y50.966 I-2.09 J.34 E.0437 G2 X-15.048 Y53.524 I-.253 J2.032 E.1525 G2 X-14.978 Y53.262 I-3.952 J-1.191 E.00441 ;WIDTH:0.299782 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335717 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357044 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z21.6 F30000 G1 X-39.352 Y-10.052 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-33.757 E.78634 G1 X-39.352 Y-33.757 E.01313 G1 X-39.352 Y-10.092 E.78502 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-34.164 E.81335 G1 X-38.945 Y-34.164 E.04014 G1 X-38.945 Y-9.685 E.81202 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-33.671 E.73226 G1 F1380 G1 X-40.59 Y-34.599 E.02851 G1 X-39.662 Y-34.599 E.02851 G1 X-39.438 Y-34.599 E.00688 G1 X-38.51 Y-34.599 E.02851 M106 S255 G1 X-38.51 Y-33.671 E.02851 G1 F12000 G1 X-38.51 Y-9.88 E.73103 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z21.6 F30000 G1 X-39.352 Y-47.948 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.352 Y-38.243 E.32194 G1 X-39.748 Y-38.243 E.01313 G1 X-39.748 Y-47.948 E.32194 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.945 Y-37.836 E.34894 G1 X-40.155 Y-37.836 E.04014 G1 X-40.155 Y-48.355 E.34894 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-38.329 E.30208 G1 F1380 G1 X-38.51 Y-37.401 E.02851 G1 X-39.438 Y-37.401 E.02851 G1 X-39.662 Y-37.401 E.00688 G1 X-40.59 Y-37.401 E.02851 M106 S255 G1 X-40.59 Y-38.329 E.02851 G1 F12000 G1 X-40.59 Y-48.16 E.30208 G1 X-40.59 Y-48.79 E.01936 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.603 Y-49.69 Z21.6 F30000 G1 X-51.352 Y-52.052 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-54.123 E.06869 G1 X-51.352 Y-54.123 E.01313 G1 X-51.352 Y-52.092 E.06736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.53 E.09569 G1 X-50.945 Y-54.53 E.04014 G1 X-50.945 Y-51.685 E.09437 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-51.84 E.01936 G1 X-52.59 Y-54.11 E.06975 G1 F2220 G1 X-52.59 Y-54.965 E.02627 G1 X-50.51 Y-54.965 E.06391 M106 S255 G1 X-50.51 Y-54.11 E.02627 G1 F12000 G1 X-50.51 Y-51.88 E.06852 G1 X-50.51 Y-51.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G17 G3 Z21.6 I1.206 J.16 P1 F30000 G1 X-51.352 Y-59.948 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.352 Y-57.877 E.06869 G1 X-51.748 Y-57.877 E.01313 G1 X-51.748 Y-59.948 E.06869 G1 X-51.392 Y-59.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-60.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-50.945 Y-57.47 E.09569 G1 X-52.155 Y-57.47 E.04014 G1 X-52.155 Y-60.355 E.09569 G1 X-50.985 Y-60.355 E.03881 G1 X-50.51 Y-60.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-50.51 Y-60.16 E.01936 G1 X-50.51 Y-57.89 E.06975 G1 F2220 G1 X-50.51 Y-57.035 E.02627 G1 X-52.59 Y-57.035 E.06391 M106 S255 G1 X-52.59 Y-57.89 E.02627 G1 F12000 G1 X-52.59 Y-60.16 E.06975 G1 X-52.59 Y-60.79 E.01936 G1 X-50.55 Y-60.79 E.06268 ;LAYER_CHANGE ;Z:21.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;21.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.529 Y-58.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z21.8 I-.601 J1.058 P1 F30000 G1 X50 Y-1.737 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.085 Y-1.734 I-.012 J1.727 E.00283 G3 X48.551 Y-.968 I-.091 J1.737 E.30302 G3 X49.96 Y-1.737 I1.437 J.958 E.05538 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X50.125 Y-2.14 E.00417 G1 X50.42 Y-2.111 E.00983 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X49.996 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00012 G1 X50.168 Y-2.572 E.00518 G1 X50.505 Y-2.539 E.01042 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.956 Y-2.585 E.01425 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.168 Y-2.572 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.878 ;WIPE_END G1 X49.868 Y1.336 Z21.8 F30000 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F15000 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 M73 P91 R7 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.658 Y-6.702 Z21.8 F30000 G1 X30.752 Y-59.948 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-57.555 E.07938 G1 X30.752 Y-57.555 E.01313 G1 X30.752 Y-59.908 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-60.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-57.148 E.10639 G1 X30.345 Y-57.148 E.04014 G1 X30.345 Y-60.315 E.10506 G1 X29.91 Y-60.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-60.16 E.01936 G1 X31.99 Y-57.665 E.07666 G1 F2400 G1 X31.99 Y-56.825 E.02581 G1 F1140 G1 X31.99 Y-56.713 E.00344 G1 X31.037 Y-56.713 E.02928 G1 X30.863 Y-56.713 E.00535 G1 X29.91 Y-56.713 E.02928 G1 X29.91 Y-56.825 E.00344 M106 S255 G1 F2400 G1 X29.91 Y-57.665 E.02581 G1 F12000 G1 X29.91 Y-60.12 E.07544 G1 X29.91 Y-60.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X31.91 Y-60.788 ;WIPE_END G17 G3 Z21.8 I-1.206 J-.16 P1 F30000 G1 X30.752 Y-52.052 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-54.445 E.07938 G1 X31.148 Y-54.445 E.01313 G1 X31.148 Y-52.052 E.07938 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-54.852 E.10639 G1 X31.555 Y-54.852 E.04014 G1 X31.555 Y-51.645 E.10639 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-51.84 E.01936 G1 X29.91 Y-54.335 E.07666 G1 F2400 G1 X29.91 Y-55.175 E.02581 G1 F1140 G1 X29.91 Y-55.287 E.00344 G1 X30.863 Y-55.287 E.02928 G1 X31.037 Y-55.287 E.00535 G1 X31.99 Y-55.287 E.02928 G1 X31.99 Y-55.175 E.00344 M106 S255 G1 F2400 G1 X31.99 Y-54.335 E.02581 G1 F12000 G1 X31.99 Y-51.84 E.07666 G1 X31.99 Y-51.21 E.01936 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.93 Y-53.21 ;WIPE_END G1 X23.025 Y-49.959 Z21.8 F30000 G1 X18.752 Y-47.948 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-37.784 E.33717 G1 X18.752 Y-37.784 E.01313 G1 X18.752 Y-47.908 E.33584 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-37.377 E.36417 G1 X18.345 Y-37.377 E.04014 G1 X18.345 Y-48.315 E.36285 G1 X17.91 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-38.031 E.31124 G1 F2400 G1 X19.99 Y-37.191 E.02581 G1 F600 G1 X19.99 Y-36.991 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X19.99 Y-36.942 E.00163 G1 X17.91 Y-36.942 E.069 G1 X17.91 Y-36.991 E.00163 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X17.91 Y-37.191 E.00615 M106 S255 G1 F2400 G1 X17.91 Y-38.031 E.02581 G1 F12000 G1 X17.91 Y-48.12 E.31001 G1 X17.91 Y-48.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X19.91 Y-48.788 ;WIPE_END G1 X19.682 Y-41.159 Z21.8 F30000 G1 X18.752 Y-10.052 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-34.216 E.80157 G1 X19.148 Y-34.216 E.01313 G1 X19.148 Y-10.052 E.80157 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-34.623 E.82858 G1 X19.555 Y-34.623 E.04014 G1 X19.555 Y-9.645 E.82858 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-33.969 E.74142 G1 F2400 G1 X17.91 Y-34.809 E.02581 G1 F600 G1 X17.91 Y-35.009 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X17.91 Y-35.058 E.00163 G1 X19.99 Y-35.058 E.069 G1 X19.99 Y-35.009 E.00163 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X19.99 Y-34.809 E.00615 M106 S255 G1 F2400 G1 X19.99 Y-33.969 E.02581 G1 F12000 G1 X19.99 Y-9.84 E.74142 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z21.8 F30000 G1 X-2.945 Y22.045 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z21.8 F30000 G1 X-5.289 Y52.709 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.259 Y52.56 E.00504 G3 X-4.022 Y51.313 I1.689 J.438 E.06106 G1 X-3.798 Y51.269 E.00758 G3 X-5.3 Y52.772 I.228 J1.73 E.28779 G1 X-5.296 Y52.749 E.0008 G1 X-4.861 Y52.798 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.78 Y52.5 E.00951 G3 X-3.909 Y51.734 I1.21 J.499 E.03692 G1 X-3.741 Y51.701 E.00527 G3 X-4.869 Y52.837 I.171 J1.298 E.19978 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.78 Y52.5 G1 X-4.705 Y52.345 G1 X-4.497 Y52.074 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.741 Y51.701 G1 X-3.461 Y51.701 ;WIPE_END G1 X-11.088 Y51.981 Z21.8 F30000 G1 X-15.51 Y52.143 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.418 Y52.332 E.00698 G3 X-17.482 Y51.313 I-1.612 J.666 E.28021 G1 X-17.258 Y51.269 E.00758 G3 X-15.53 Y52.108 I.228 J1.73 E.0675 G1 X-15.896 Y52.345 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-17.369 Y51.734 I-1.134 J.653 E.20003 G1 X-17.201 Y51.701 E.00527 G3 X-15.916 Y52.311 I.171 J1.298 E.0462 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.819 Y52.499 G1 X-15.733 Y52.819 G1 X-15.719 Y52.999 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.103 Y53.927 G1 X-16.3 Y54.078 ;WIPE_END G1 X-8.74 Y53.027 Z21.8 F30000 G1 X-5.991 Y52.645 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.93 Y52.645 E.00203 G1 X-5.744 Y52.099 E.01912 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-5.744 Y53.901 I-.307 J2.333 E.32703 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-6.031 Y52.645 E.28658 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-3.553 Y50.212 I2.668 J.782 E.11046 G3 X-6.241 Y53.79 I-.016 J2.787 E.37841 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.673 J-.79 E.48887 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.545 Y52.457 F30000 ;TYPE:Gap infill ;WIDTH:0.242619 G1 F12000 G1 X-5.555 Y52.489 E.00055 G2 X-5.622 Y52.738 I3.764 J1.134 E.0042 ;WIDTH:0.299787 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335721 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350968 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387471 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366227 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335732 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297827 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242619 G2 X-3.831 Y55.033 I2.09 J-.34 E.04362 G1 X-3.57 Y55.05 E.00426 G1 X-3.309 Y55.033 E.00426 G1 X-3.033 Y54.978 E.00457 G1 X-2.786 Y54.894 E.00426 G1 X-2.545 Y54.775 E.00436 G1 X-2.322 Y54.626 E.00436 G1 X-2.125 Y54.454 E.00426 G1 X-1.94 Y54.243 E.00457 G1 X-1.795 Y54.025 E.00426 G1 X-1.676 Y53.784 E.00436 G1 X-1.59 Y53.531 E.00436 G1 X-1.539 Y53.274 E.00426 G1 X-1.52 Y52.989 E.00464 G2 X-5.464 Y52.215 I-2.05 J.011 E.09152 G1 X-5.532 Y52.419 E.00348 G1 X-5.696 Y53 F30000 ;WIDTH:0.346373 G1 F12000 G1 X-14.904 Y53 E.22771 G1 X-14.913 Y52.984 E.00045 ;WIDTH:0.36252 G1 X-14.93 Y52.939 E.00127 ;WIDTH:0.334704 G1 X-14.948 Y52.893 E.00116 ;WIDTH:0.297165 G1 X-14.985 Y52.71 E.00388 ;WIDTH:0.242557 G2 X-17.567 Y51.022 I-2.065 J.34 E.05641 G1 X-17.814 Y51.106 E.00426 G1 X-18.055 Y51.225 E.00436 G1 X-18.278 Y51.374 E.00436 G1 X-18.487 Y51.558 E.00454 G2 X-15.048 Y53.524 I1.457 J1.442 E.12215 G2 X-14.978 Y53.262 I-3.947 J-1.19 E.00441 ;WIDTH:0.299788 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.336599 G1 X-14.928 Y53.057 E.00127 ;WIDTH:0.357342 G1 X-14.904 Y53 E.00159 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.928 Y53.057 ;WIPE_END G1 X-17.683 Y45.939 Z21.8 F30000 G1 X-39.352 Y-10.052 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-34.216 E.80157 G1 X-39.352 Y-34.216 E.01313 G1 X-39.352 Y-10.092 E.80025 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-34.623 E.82858 G1 X-38.945 Y-34.623 E.04014 G1 X-38.945 Y-9.685 E.82725 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-33.969 E.74142 G1 F2400 G1 X-40.59 Y-34.809 E.02581 G1 F600 G1 X-40.59 Y-35.009 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-40.59 Y-35.058 E.00163 G1 X-38.51 Y-35.058 E.069 G1 X-38.51 Y-35.009 E.00163 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-38.51 Y-34.809 E.00615 M106 S255 G1 F2400 G1 X-38.51 Y-33.969 E.02581 G1 F12000 G1 X-38.51 Y-9.88 E.74019 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-40.282 Y-16.841 Z21.8 F30000 G1 X-39.352 Y-47.948 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.352 Y-37.784 E.33717 G1 X-39.748 Y-37.784 E.01313 G1 X-39.748 Y-47.948 E.33717 G1 X-39.392 Y-47.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-48.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-38.945 Y-37.377 E.36417 G1 X-40.155 Y-37.377 E.04014 G1 X-40.155 Y-48.355 E.36417 G1 X-38.985 Y-48.355 E.03881 G1 X-38.51 Y-48.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-38.031 E.31124 G1 F2400 G1 X-38.51 Y-37.191 E.02581 G1 F600 G1 X-38.51 Y-36.991 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-38.51 Y-36.942 E.00163 G1 X-40.59 Y-36.942 E.069 G1 X-40.59 Y-36.991 E.00163 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-40.59 Y-37.191 E.00615 M106 S255 G1 F2400 G1 X-40.59 Y-38.031 E.02581 G1 F12000 G1 X-40.59 Y-48.16 E.31124 G1 X-40.59 Y-48.79 E.01936 G1 X-38.55 Y-48.79 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-38.543 Y-46.79 ;WIPE_END G1 X-45.603 Y-49.69 Z21.8 F30000 G1 X-51.352 Y-52.052 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-54.445 E.07938 G1 X-51.352 Y-54.445 E.01313 G1 X-51.352 Y-52.092 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-54.852 E.10639 G1 X-50.945 Y-54.852 E.04014 G1 X-50.945 Y-51.685 E.10506 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-51.84 E.01936 G1 X-52.59 Y-54.335 E.07666 G1 F2400 G1 X-52.59 Y-55.175 E.02581 G1 F1140 G1 X-52.59 Y-55.287 E.00344 G1 X-51.637 Y-55.287 E.02928 G1 X-51.463 Y-55.287 E.00535 G1 X-50.51 Y-55.287 E.02928 G1 X-50.51 Y-55.175 E.00344 M106 S255 G1 F2400 G1 X-50.51 Y-54.335 E.02581 G1 F12000 G1 X-50.51 Y-51.88 E.07544 G1 X-50.51 Y-51.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G17 G3 Z21.8 I1.206 J.16 P1 F30000 G1 X-51.352 Y-59.948 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.352 Y-57.555 E.07938 G1 X-51.748 Y-57.555 E.01313 G1 X-51.748 Y-59.948 E.07938 G1 X-51.392 Y-59.948 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-60.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-50.945 Y-57.148 E.10639 G1 X-52.155 Y-57.148 E.04014 G1 X-52.155 Y-60.355 E.10639 G1 X-50.985 Y-60.355 E.03881 G1 X-50.51 Y-60.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-50.51 Y-60.16 E.01936 G1 X-50.51 Y-57.665 E.07666 G1 F2400 G1 X-50.51 Y-56.825 E.02581 G1 F1140 G1 X-50.51 Y-56.713 E.00344 G1 X-51.463 Y-56.713 E.02928 G1 X-51.637 Y-56.713 E.00535 G1 X-52.59 Y-56.713 E.02928 G1 X-52.59 Y-56.825 E.00344 M106 S255 G1 F2400 G1 X-52.59 Y-57.665 E.02581 G1 F12000 G1 X-52.59 Y-60.16 E.07666 G1 X-52.59 Y-60.79 E.01936 G1 X-50.55 Y-60.79 E.06268 ;LAYER_CHANGE ;Z:21.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;21.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-50.53 Y-58.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22 I-.601 J1.058 P1 F30000 G1 X50 Y-1.736 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X50.082 Y-1.735 I.014 J1.794 E.00271 G3 X48.768 Y-1.232 I-.089 J1.736 E.31431 G3 X49.96 Y-1.735 I1.247 J1.291 E.04392 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X50.122 Y-2.14 E.00406 G1 X50.42 Y-2.111 E.00994 G3 X49.96 Y-2.151 I-.419 J2.105 E.43209 G1 X49.996 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50 Y-2.589 E.00012 G1 X50.164 Y-2.573 E.00507 G1 X50.505 Y-2.539 E.01052 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.956 Y-2.585 E.01425 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.164 Y-2.573 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.773 Y-1.878 ;WIPE_END G1 X50.633 Y-1.184 Z22 F30000 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.263 Y-1.323 E.01213 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F15000 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.049 Y.189 G1 X49.049 Y-.189 G1 X49.194 Y-.539 G1 X49.461 Y-.806 G1 X49.811 Y-.951 G1 X49.958 Y-.951 ;WIPE_END G1 X47.273 Y-8.096 Z22 F30000 G1 X30.752 Y-52.052 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-54.597 E.08442 G1 F2400 G1 X30.752 Y-55.497 E.02985 G1 F600 G1 X30.752 Y-55.697 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X30.752 Y-56.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.752 Y-56.503 E.00663 M106 S255 G1 F2400 G1 X30.752 Y-57.403 E.02985 G1 F18000 G1 X30.752 Y-59.948 E.08442 G1 X31.148 Y-59.948 E.01314 G1 X31.148 Y-57.403 E.08442 G1 F2400 G1 X31.148 Y-56.503 E.02985 G1 F600 G1 X31.148 Y-56.303 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X31.148 Y-55.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X31.148 Y-55.497 E.00663 M106 S255 G1 F2400 G1 X31.148 Y-54.597 E.02985 G1 F18000 G1 X31.148 Y-52.052 E.08442 G1 X30.792 Y-52.052 E.01181 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-51.9 E.00846 G1 X30.345 Y-54.597 E.08946 G1 F2400 G1 X30.345 Y-55.497 E.02985 G1 F600 G1 X30.345 Y-55.697 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X30.345 Y-56.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.345 Y-56.503 E.00663 M106 S255 G1 F2400 G1 X30.345 Y-57.403 E.02985 G1 F18000 G1 X30.345 Y-60.1 E.08946 G1 X30.345 Y-60.355 E.00846 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-60.1 E.00846 G1 X31.555 Y-57.403 E.08946 G1 F2400 G1 X31.555 Y-56.503 E.02985 G1 F600 G1 X31.555 Y-56.303 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X31.555 Y-55.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X31.555 Y-55.497 E.00663 M106 S255 G1 F2400 G1 X31.555 Y-54.597 E.02985 G1 F18000 G1 X31.555 Y-51.9 E.08946 G1 X31.555 Y-51.645 E.00846 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-51.84 E.01936 G1 X29.91 Y-54.657 E.08656 G1 F2400 G1 X29.91 Y-55.497 E.02581 G1 F600 G1 X29.91 Y-55.697 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X29.91 Y-56.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X29.91 Y-56.503 E.00615 M106 S255 G1 F2400 G1 X29.91 Y-57.343 E.02581 G1 F12000 G1 X29.91 Y-60.16 E.08656 G1 X29.91 Y-60.79 E.01936 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-60.16 E.01936 G1 X31.99 Y-57.343 E.08656 G1 F2400 G1 X31.99 Y-56.503 E.02581 G1 F600 G1 X31.99 Y-56.303 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X31.99 Y-55.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X31.99 Y-55.497 E.00615 M106 S255 G1 F2400 G1 X31.99 Y-54.657 E.02581 G1 F12000 G1 X31.99 Y-51.84 E.08656 G1 X31.99 Y-51.21 E.01936 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.932 Y-53.21 ;WIPE_END G1 X28.018 Y-45.821 Z22 F30000 M73 P91 R6 G1 X18.752 Y-10.052 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X18.752 Y-34.368 E.80661 G1 F2400 G1 X18.752 Y-35.268 E.02985 G1 F600 G1 X18.752 Y-35.468 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X18.752 Y-36.532 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X18.752 Y-36.732 E.00663 M106 S255 G1 F2400 G1 X18.752 Y-37.632 E.02985 G1 F18000 G1 X18.752 Y-47.948 E.3422 G1 X19.148 Y-47.948 E.01314 G1 X19.148 Y-37.632 E.3422 G1 F2400 G1 X19.148 Y-36.732 E.02985 G1 F600 G1 X19.148 Y-36.532 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X19.148 Y-35.468 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X19.148 Y-35.268 E.00663 M106 S255 G1 F2400 G1 X19.148 Y-34.368 E.02985 G1 F18000 G1 X19.148 Y-10.052 E.80661 G1 X18.792 Y-10.052 E.01181 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X18.345 Y-9.9 E.00846 G1 X18.345 Y-34.368 E.81165 G1 F2400 G1 X18.345 Y-35.268 E.02985 G1 F600 G1 X18.345 Y-35.468 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X18.345 Y-36.532 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X18.345 Y-36.732 E.00663 M106 S255 G1 F2400 G1 X18.345 Y-37.632 E.02985 G1 F18000 G1 X18.345 Y-48.1 E.34724 G1 X18.345 Y-48.355 E.00846 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-48.1 E.00846 G1 X19.555 Y-37.632 E.34724 G1 F2400 G1 X19.555 Y-36.732 E.02985 G1 F600 G1 X19.555 Y-36.532 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X19.555 Y-35.468 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X19.555 Y-35.268 E.00663 M106 S255 G1 F2400 G1 X19.555 Y-34.368 E.02985 G1 F18000 G1 X19.555 Y-9.9 E.81165 G1 X19.555 Y-9.645 E.00846 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X17.91 Y-9.84 E.01936 G1 X17.91 Y-34.428 E.75552 G1 F2400 G1 X17.91 Y-35.268 E.02581 G1 F600 G1 X17.91 Y-35.468 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X17.91 Y-36.532 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X17.91 Y-36.732 E.00615 M106 S255 G1 F2400 G1 X17.91 Y-37.572 E.02581 G1 F12000 G1 X17.91 Y-48.16 E.32534 G1 X17.91 Y-48.79 E.01936 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-48.16 E.01936 G1 X19.99 Y-37.572 E.32534 G1 F2400 G1 X19.99 Y-36.732 E.02581 G1 F600 G1 X19.99 Y-36.532 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X19.99 Y-35.468 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X19.99 Y-35.268 E.00615 M106 S255 G1 F2400 G1 X19.99 Y-34.428 E.02581 G1 F12000 G1 X19.99 Y-9.84 E.75552 G1 X19.99 Y-9.21 E.01936 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.947 Y-11.21 ;WIPE_END G1 X13.887 Y-4.747 Z22 F30000 G1 X-2.945 Y22.045 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z22 F30000 G1 X-5.289 Y52.708 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.256 Y52.548 E.00541 G3 X-4.022 Y51.313 I1.686 J.45 E.06065 G1 X-3.798 Y51.269 E.00758 G3 X-5.3 Y52.772 I.228 J1.73 E.28779 G1 X-5.296 Y52.747 E.00084 G1 X-4.862 Y52.793 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-4.835 Y52.661 E.00413 G3 X-3.909 Y51.734 I1.265 J.338 E.04216 G1 X-3.741 Y51.701 E.00527 G3 X-4.869 Y52.832 I.171 J1.298 E.19994 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.835 Y52.661 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.741 Y51.701 G1 X-3.456 Y51.701 ;WIPE_END G1 X-11.083 Y51.98 Z22 F30000 G1 X-15.51 Y52.143 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.418 Y52.332 E.00698 G3 X-17.482 Y51.313 I-1.612 J.666 E.28021 G1 X-17.258 Y51.269 E.00758 G3 X-15.53 Y52.108 I.228 J1.73 E.06749 G1 X-15.896 Y52.345 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-17.369 Y51.734 I-1.134 J.653 E.20003 G1 X-17.201 Y51.701 E.00527 G3 X-15.916 Y52.311 I.171 J1.298 E.0462 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.297 Y54.083 ;WIPE_END G1 X-8.742 Y52.995 Z22 F30000 G1 X-5.91 Y52.587 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-5.744 Y52.099 E.01708 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-2.961 Y55.273 I-.313 J2.334 E.21432 G3 X-5.744 Y53.901 I-.6 J-2.292 E.11226 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-4.953 Y50.579 I2.718 J.821 E.06539 G3 X-3.557 Y50.211 I1.427 J2.586 E.04481 G3 X-2.165 Y50.591 I-.057 J2.953 E.04481 G3 X-6.241 Y53.79 I-1.406 J2.406 E.33345 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.673 J-.79 E.4889 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242587 G1 F12000 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299783 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335716 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350963 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387466 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.36622 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335722 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297818 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242587 G2 X-3.561 Y55.05 I2.083 J-.338 E.04799 G1 X-3.302 Y55.032 E.00421 G1 X-3.046 Y54.981 E.00426 G1 X-2.792 Y54.896 E.00436 G1 X-2.545 Y54.775 E.00447 G1 X-2.327 Y54.63 E.00426 G1 X-2.121 Y54.449 E.00447 G1 X-1.944 Y54.248 E.00436 G1 X-1.795 Y54.025 E.00436 G1 X-1.679 Y53.79 E.00426 G1 X-1.59 Y53.531 E.00447 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.94 Y51.757 E.00426 G1 X-2.121 Y51.551 E.00447 G1 X-2.322 Y51.374 E.00436 G1 X-2.545 Y51.225 E.00436 G1 X-2.786 Y51.106 E.00436 G1 X-3.039 Y51.02 E.00436 G1 X-3.302 Y50.968 E.00436 G1 X-3.57 Y50.951 E.00436 G1 X-3.838 Y50.968 E.00436 G1 X-4.101 Y51.02 E.00436 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.02 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F12000 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366215 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.33572 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242587 G2 X-16.772 Y50.967 I-2.09 J.34 E.04366 G1 X-17.03 Y50.951 E.00421 G1 X-17.291 Y50.967 E.00426 G1 X-17.554 Y51.019 E.00436 G1 X-17.814 Y51.106 E.00447 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.804 Y54.027 E.0044 G1 X-18.656 Y54.248 E.00432 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.055 Y54.775 E.00436 G1 X-17.814 Y54.894 E.00436 G1 X-17.561 Y54.98 E.00436 G1 X-17.298 Y55.032 E.00436 G1 X-17.021 Y55.05 E.00451 G1 X-16.763 Y55.032 E.00421 G1 X-16.506 Y54.981 E.00426 G1 X-16.252 Y54.896 E.00436 G1 X-16.005 Y54.775 E.00447 G1 X-15.787 Y54.63 E.00426 G1 X-15.581 Y54.449 E.00447 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.603 J-1.97 E.00877 ;WIDTH:0.299788 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335724 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357049 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z22 F30000 G1 X-39.352 Y-10.052 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-39.748 Y-10.052 E.01314 G1 X-39.748 Y-34.368 E.80661 G1 F2400 G1 X-39.748 Y-35.268 E.02985 G1 F600 G1 X-39.748 Y-35.468 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-39.748 Y-36.532 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-39.748 Y-36.732 E.00663 M106 S255 G1 F2400 G1 X-39.748 Y-37.632 E.02985 G1 F18000 G1 X-39.748 Y-47.948 E.3422 G1 X-39.352 Y-47.948 E.01314 G1 X-39.352 Y-37.632 E.3422 G1 F2400 G1 X-39.352 Y-36.732 E.02985 G1 F600 G1 X-39.352 Y-36.532 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-39.352 Y-35.468 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-39.352 Y-35.268 E.00663 M106 S255 G1 F2400 G1 X-39.352 Y-34.368 E.02985 G1 F18000 G1 X-39.352 Y-10.092 E.80528 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-9.9 E.00846 G1 X-40.155 Y-34.368 E.81165 G1 F2400 G1 X-40.155 Y-35.268 E.02985 G1 F600 G1 X-40.155 Y-35.468 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-40.155 Y-36.532 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-40.155 Y-36.732 E.00663 M106 S255 G1 F2400 G1 X-40.155 Y-37.632 E.02985 G1 F18000 G1 X-40.155 Y-48.1 E.34724 G1 X-40.155 Y-48.355 E.00846 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-48.1 E.00846 G1 X-38.945 Y-37.632 E.34724 G1 F2400 G1 X-38.945 Y-36.732 E.02985 G1 F600 G1 X-38.945 Y-36.532 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-38.945 Y-35.468 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-38.945 Y-35.268 E.00663 M106 S255 G1 F2400 G1 X-38.945 Y-34.368 E.02985 G1 F18000 G1 X-38.945 Y-9.94 E.81032 G1 X-38.945 Y-9.685 E.00846 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-9.84 E.01936 G1 X-40.59 Y-34.428 E.75552 G1 F2400 G1 X-40.59 Y-35.268 E.02581 G1 F600 G1 X-40.59 Y-35.468 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-40.59 Y-36.532 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-40.59 Y-36.732 E.00615 M106 S255 G1 F2400 G1 X-40.59 Y-37.572 E.02581 G1 F12000 G1 X-40.59 Y-48.16 E.32534 G1 X-40.59 Y-48.79 E.01936 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-48.16 E.01936 G1 X-38.51 Y-37.572 E.32534 G1 F2400 G1 X-38.51 Y-36.732 E.02581 G1 F600 G1 X-38.51 Y-36.532 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-38.51 Y-35.468 E.03529 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-38.51 Y-35.268 E.00615 M106 S255 G1 F2400 G1 X-38.51 Y-34.428 E.02581 G1 F12000 G1 X-38.51 Y-9.88 E.75429 G1 X-38.51 Y-9.25 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z22 F30000 G1 X-51.352 Y-52.052 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01314 G1 X-51.748 Y-54.597 E.08442 G1 F2400 G1 X-51.748 Y-55.497 E.02985 G1 F600 G1 X-51.748 Y-55.697 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-51.748 Y-56.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-51.748 Y-56.503 E.00663 M106 S255 G1 F2400 G1 X-51.748 Y-57.403 E.02985 G1 F18000 G1 X-51.748 Y-59.948 E.08442 G1 X-51.352 Y-59.948 E.01314 G1 X-51.352 Y-57.403 E.08442 G1 F2400 G1 X-51.352 Y-56.503 E.02985 G1 F600 G1 X-51.352 Y-56.303 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-51.352 Y-55.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-51.352 Y-55.497 E.00663 M106 S255 G1 F2400 G1 X-51.352 Y-54.597 E.02985 G1 F18000 G1 X-51.352 Y-52.092 E.0831 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-51.9 E.00846 G1 X-52.155 Y-54.597 E.08946 G1 F2400 G1 X-52.155 Y-55.497 E.02985 G1 F600 G1 X-52.155 Y-55.697 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-52.155 Y-56.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-52.155 Y-56.503 E.00663 M106 S255 G1 F2400 G1 X-52.155 Y-57.403 E.02985 G1 F18000 G1 X-52.155 Y-60.1 E.08946 G1 X-52.155 Y-60.355 E.00846 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-60.1 E.00846 G1 X-50.945 Y-57.403 E.08946 G1 F2400 G1 X-50.945 Y-56.503 E.02985 G1 F600 G1 X-50.945 Y-56.303 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-50.945 Y-55.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-50.945 Y-55.497 E.00663 M106 S255 G1 F2400 G1 X-50.945 Y-54.597 E.02985 G1 F18000 G1 X-50.945 Y-51.94 E.08814 G1 X-50.945 Y-51.685 E.00846 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-51.84 E.01936 G1 X-52.59 Y-54.657 E.08656 G1 F2400 G1 X-52.59 Y-55.497 E.02581 G1 F600 G1 X-52.59 Y-55.697 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-52.59 Y-56.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-52.59 Y-56.503 E.00615 M106 S255 G1 F2400 G1 X-52.59 Y-57.343 E.02581 G1 F12000 G1 X-52.59 Y-60.16 E.08656 G1 X-52.59 Y-60.79 E.01936 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-60.16 E.01936 G1 X-50.51 Y-57.343 E.08656 G1 F2400 G1 X-50.51 Y-56.503 E.02581 G1 F600 G1 X-50.51 Y-56.303 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-50.51 Y-55.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-50.51 Y-55.497 E.00615 M106 S255 G1 F2400 G1 X-50.51 Y-54.657 E.02581 G1 F12000 G1 X-50.51 Y-51.88 E.08533 G1 X-50.51 Y-51.25 E.01936 ;LAYER_CHANGE ;Z:21.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;21.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22.2 I-.529 J1.096 P1 F30000 G1 X50 Y-1.736 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G3 X50.078 Y-1.735 I.015 J1.796 E.0026 G3 X48.768 Y-1.232 I-.086 J1.737 E.31445 G3 X49.96 Y-1.735 I1.247 J1.292 E.04392 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11348 G1 X50.118 Y-2.14 E.00394 G1 X50.42 Y-2.111 E.01005 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X49.996 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G1 X50 Y-2.589 E.00012 G1 X50.161 Y-2.573 E.00497 G1 X50.505 Y-2.539 E.01063 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.956 Y-2.585 E.01425 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.161 Y-2.573 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.878 ;WIPE_END G1 X49.148 Y1.038 Z22.2 F30000 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11348 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11348 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F11348 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.834 Y.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11348 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.967 Y.573 ;WIPE_END G1 X47.349 Y-6.597 Z22.2 F30000 G1 X30.752 Y-52.052 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11348 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z22.2 F30000 G1 X18.752 Y-10.052 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11348 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z22.2 F30000 G1 X-2.945 Y22.045 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.828 Y30.406 Z22.2 F30000 G1 X-5.288 Y52.707 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X-5.253 Y52.549 E.00536 G3 X-3.798 Y51.269 I1.687 J.451 E.06817 G3 X-3.57 Y54.746 I.224 J1.732 E.18932 G3 X-5.298 Y52.773 I.004 J-1.747 E.09844 G1 X-5.294 Y52.746 E.00088 G1 X-4.862 Y52.792 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G1 X-4.833 Y52.662 E.00409 G3 X-3.741 Y51.701 I1.266 J.338 E.04738 G3 X-3.57 Y54.31 I.168 J1.299 E.13159 G3 X-4.867 Y52.831 I.003 J-1.311 E.06836 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.833 Y52.662 G1 X-4.705 Y52.345 G1 X-4.61 Y52.202 G1 X-4.368 Y51.96 G1 X-4.225 Y51.865 G1 X-3.909 Y51.734 G1 X-3.741 Y51.701 G1 X-3.454 Y51.701 ;WIPE_END G1 X-11.082 Y51.98 Z22.2 F30000 G1 X-15.51 Y52.143 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X-15.42 Y52.333 E.00698 G3 X-17.03 Y54.746 I-1.614 J.667 E.11358 G3 X-17.258 Y51.269 I.004 J-1.747 E.17417 G3 X-15.532 Y52.109 I.224 J1.732 E.06744 G1 X-15.897 Y52.346 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G3 X-17.03 Y54.31 I-1.135 J.654 E.08421 G3 X-17.201 Y51.701 I.003 J-1.311 E.12106 G3 X-15.918 Y52.312 I.168 J1.299 E.04616 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.764 Y52.661 G1 X-15.731 Y52.829 G1 X-15.731 Y53.171 G1 X-15.764 Y53.339 G1 X-15.895 Y53.655 G1 X-15.99 Y53.798 G1 X-16.232 Y54.04 G1 X-16.297 Y54.083 ;WIPE_END G1 X-8.738 Y53.028 Z22.2 F30000 G1 X-5.991 Y52.645 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X-5.93 Y52.645 E.00203 G1 X-5.744 Y52.099 E.01912 G3 X-3.263 Y50.667 I2.174 J.901 E.1022 G3 X-2.961 Y55.273 I-.313 J2.334 E.21432 G3 X-5.744 Y53.901 I-.6 J-2.292 E.11226 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-14.856 Y52.099 I-2.174 J-.901 E.42923 G1 X-14.67 Y52.645 E.01912 G1 X-6.031 Y52.645 E.28658 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G3 X-3.561 Y50.211 I2.687 J.807 E.11006 G3 X-6.241 Y53.79 I-.01 J2.786 E.37837 G1 X-14.359 Y53.79 E.24942 G3 X-14.359 Y52.21 I-2.67 J-.79 E.4884 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.531 Y52.436 F30000 ;TYPE:Gap infill ;WIDTH:0.242552 G1 F11348 G1 X-5.622 Y52.738 E.00512 ;WIDTH:0.299786 G1 X-5.652 Y52.893 E.00332 ;WIDTH:0.335719 G1 X-5.671 Y52.941 E.00122 ;WIDTH:0.350965 G1 X-5.689 Y52.989 E.00129 ;WIDTH:0.387467 G2 X-5.689 Y53.011 I.006 J.011 E.00075 ;WIDTH:0.366225 G1 X-5.671 Y53.059 E.00135 ;WIDTH:0.335725 G1 X-5.652 Y53.107 E.00122 ;WIDTH:0.297817 G1 X-5.618 Y53.277 E.00361 ;WIDTH:0.242552 G2 X-3.831 Y55.033 I2.09 J-.34 E.0436 G1 X-3.57 Y55.05 E.00426 G1 X-3.296 Y55.031 E.00447 G1 X-3.039 Y54.98 E.00426 G1 X-2.792 Y54.896 E.00426 G1 X-2.551 Y54.778 E.00436 G1 X-2.322 Y54.626 E.00447 G1 X-2.121 Y54.449 E.00436 G1 X-1.944 Y54.248 E.00436 G1 X-1.798 Y54.03 E.00426 G1 X-1.676 Y53.784 E.00447 G1 X-1.59 Y53.531 E.00436 G1 X-1.538 Y53.268 E.00436 G1 X-1.52 Y53 E.00436 G1 X-1.538 Y52.732 E.00436 G1 X-1.59 Y52.469 E.00436 G1 X-1.676 Y52.216 E.00436 G1 X-1.795 Y51.975 E.00436 G1 X-1.944 Y51.752 E.00436 G1 X-2.121 Y51.551 E.00436 G1 X-2.322 Y51.374 E.00436 G1 X-2.551 Y51.222 E.00447 G1 X-2.786 Y51.106 E.00426 G1 X-3.033 Y51.022 E.00426 G1 X-3.296 Y50.969 E.00436 G1 X-3.57 Y50.95 E.00447 G1 X-3.831 Y50.967 E.00426 G1 X-4.101 Y51.02 E.00447 G1 X-4.354 Y51.106 E.00436 G1 X-4.595 Y51.225 E.00436 G1 X-4.818 Y51.374 E.00436 G1 X-5.019 Y51.551 E.00436 G1 X-5.196 Y51.752 E.00436 G1 X-5.345 Y51.975 E.00436 G1 X-5.466 Y52.222 E.00447 G1 X-5.519 Y52.398 E.00299 G1 X-5.696 Y53 F30000 ;WIDTH:0.346356 G1 F11348 G1 X-14.911 Y52.989 E.22785 ;WIDTH:0.366217 G1 X-14.929 Y52.941 E.00135 ;WIDTH:0.335721 G1 X-14.948 Y52.893 E.00122 ;WIDTH:0.297817 G1 X-14.982 Y52.723 E.00361 ;WIDTH:0.242552 G2 X-16.769 Y50.967 I-2.09 J.34 E.0436 G1 X-17.03 Y50.95 E.00426 G1 X-17.304 Y50.969 E.00447 G1 X-17.567 Y51.022 E.00436 G1 X-17.814 Y51.106 E.00426 G1 X-18.049 Y51.222 E.00426 G1 X-18.278 Y51.374 E.00447 G1 X-18.479 Y51.551 E.00436 G1 X-18.656 Y51.752 E.00436 G1 X-18.802 Y51.97 E.00426 G1 X-18.924 Y52.216 E.00447 G1 X-19.01 Y52.469 E.00436 G1 X-19.062 Y52.732 E.00436 G1 X-19.08 Y53 E.00436 G1 X-19.062 Y53.268 E.00436 G1 X-19.01 Y53.531 E.00436 G1 X-18.924 Y53.784 E.00436 G1 X-18.805 Y54.025 E.00436 G1 X-18.656 Y54.248 E.00436 G1 X-18.479 Y54.449 E.00436 G1 X-18.278 Y54.626 E.00436 G1 X-18.049 Y54.778 E.00447 G1 X-17.814 Y54.894 E.00426 G1 X-17.567 Y54.978 E.00426 G1 X-17.304 Y55.031 E.00436 G1 X-17.03 Y55.05 E.00447 G1 X-16.769 Y55.033 E.00426 G1 X-16.499 Y54.98 E.00447 G1 X-16.246 Y54.894 E.00436 G1 X-16.005 Y54.775 E.00436 G1 X-15.782 Y54.626 E.00436 G1 X-15.581 Y54.449 E.00436 G1 X-15.404 Y54.248 E.00436 G1 X-15.255 Y54.025 E.00436 G1 X-15.134 Y53.778 E.00447 G2 X-14.978 Y53.262 I-5.603 J-1.97 E.00877 ;WIDTH:0.299782 G1 X-14.948 Y53.107 E.00332 ;WIDTH:0.335719 G1 X-14.929 Y53.059 E.00122 ;WIDTH:0.357044 G3 X-14.904 Y53 I.202 J.05 E.00164 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.929 Y53.059 ;WIPE_END G1 X-17.684 Y45.941 Z22.2 F30000 G1 X-39.352 Y-10.052 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11348 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z22.2 F30000 G1 X-51.352 Y-52.052 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11348 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11348 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11348 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:22 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;22 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;22 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22.4 I-.529 J1.096 P1 F30000 G1 X50 Y-1.736 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G3 X50.075 Y-1.735 I.016 J1.798 E.00249 G3 X48.768 Y-1.232 I-.082 J1.737 E.31458 G3 X49.96 Y-1.736 I1.248 J1.294 E.04392 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11356 G1 X50.115 Y-2.141 E.00383 G1 X50.42 Y-2.111 E.01016 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X49.996 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G1 X50 Y-2.589 E.00011 G1 X50.158 Y-2.573 E.00487 G1 X50.505 Y-2.539 E.01073 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.957 Y-2.585 E.01425 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.158 Y-2.573 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.878 ;WIPE_END G1 X50.633 Y-1.184 Z22.4 F30000 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11356 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11356 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F11356 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11356 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.539 Y.806 G1 X50.189 Y.951 G1 X49.811 Y.951 G1 X49.461 Y.806 G1 X49.194 Y.539 G1 X49.137 Y.402 ;WIPE_END G1 X46.612 Y-6.8 Z22.4 F30000 G1 X30.752 Y-52.052 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11356 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z22.4 F30000 G1 X18.752 Y-10.052 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11356 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z22.4 F30000 G1 X-2.945 Y22.045 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P92 R6 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.843 Y30.405 Z22.4 F30000 G1 X-5.345 Y52.684 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X-5.319 Y52.553 E.00443 G3 X-4.038 Y51.255 I1.749 J.445 E.06342 G1 X-3.806 Y51.209 E.00784 G3 X-5.36 Y52.764 I.235 J1.789 E.29768 G1 X-5.352 Y52.723 E.0014 G1 X-4.911 Y52.77 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G1 X-4.896 Y52.663 E.00331 G3 X-3.749 Y51.641 I1.329 J.337 E.0501 G3 X-3.569 Y54.371 I.176 J1.359 E.13758 G3 X-4.938 Y53 I.002 J-1.371 E.0661 G1 X-4.916 Y52.809 E.00589 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.896 Y52.663 G1 X-4.837 Y52.477 G1 X-4.657 Y52.166 G1 X-4.404 Y51.913 G1 X-4.255 Y51.813 G1 X-3.925 Y51.676 G1 X-3.749 Y51.641 G1 X-3.525 Y51.641 ;WIPE_END G1 X-11.152 Y51.945 Z22.4 F30000 G1 X-15.456 Y52.116 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X-15.363 Y52.309 E.00713 G3 X-17.498 Y51.255 I-1.668 J.689 E.28984 G1 X-17.266 Y51.209 E.00784 G3 X-15.476 Y52.081 I.235 J1.789 E.06996 G1 X-15.845 Y52.316 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G3 X-17.029 Y54.371 I-1.187 J.684 E.08802 G3 X-17.209 Y51.641 I.003 J-1.371 E.12659 G3 X-15.866 Y52.282 I.176 J1.359 E.04833 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.706 Y52.645 G1 X-15.671 Y52.821 G1 X-15.671 Y53.179 G1 X-15.706 Y53.355 G1 X-15.843 Y53.685 G1 X-15.943 Y53.834 G1 X-16.19 Y54.081 ;WIPE_END G1 X-8.637 Y52.983 Z22.4 F30000 G1 X-5.91 Y52.587 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X-5.744 Y52.099 E.01708 G3 X-5.744 Y53.901 I2.173 J.901 E.42902 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-16.723 Y50.667 I-2.174 J-.901 E.34736 G3 X-14.856 Y52.099 I-.307 J2.334 E.08176 G1 X-14.67 Y52.645 E.01912 G1 X-5.93 Y52.645 E.28994 G1 X-5.923 Y52.625 E.00071 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-14.359 Y53.79 E.24942 G3 X-16.666 Y50.234 I-2.671 J-.793 E.3899 G3 X-14.359 Y52.21 I-.383 J2.783 E.09861 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.572 Y52.446 F30000 ;TYPE:Gap infill ;WIDTH:0.182751 G1 F11356 G1 X-5.586 Y52.487 E.0005 G1 X-5.651 Y52.732 E.00288 ;WIDTH:0.239397 G1 X-5.681 Y52.883 E.00247 ;WIDTH:0.280939 G1 X-5.706 Y52.937 E.00114 ;WIDTH:0.302318 G1 X-5.731 Y52.99 E.00125 ;WIDTH:0.35211 G1 X-5.731 Y53.01 E.0005 ;WIDTH:0.323703 G1 X-5.706 Y53.063 E.00135 ;WIDTH:0.280945 G1 X-5.681 Y53.117 E.00114 ;WIDTH:0.237924 G1 X-5.649 Y53.279 E.00264 ;WIDTH:0.182751 G1 X-5.487 Y53.806 E.00627 G2 X-5.492 Y52.205 I1.915 J-.806 E.13003 G1 X-5.56 Y52.408 E.00244 G1 X-5.738 Y53 F30000 ;WIDTH:0.345917 G1 F11356 G1 X-14.869 Y52.99 E.22543 ;WIDTH:0.323699 G1 X-14.894 Y52.937 E.00135 ;WIDTH:0.280944 G1 X-14.919 Y52.883 E.00114 ;WIDTH:0.237923 G1 X-14.951 Y52.721 E.00264 ;WIDTH:0.182724 G1 X-15.108 Y52.204 E.00615 G1 X-15.227 Y51.964 E.00305 G1 X-15.38 Y51.734 E.00315 G1 X-15.559 Y51.529 E.0031 G1 X-15.768 Y51.347 E.00315 G1 X-15.99 Y51.199 E.00305 G1 X-16.23 Y51.08 E.00305 G1 X-16.492 Y50.991 E.00315 G1 X-16.769 Y50.937 E.00322 G2 X-15.02 Y53.534 I-.258 J2.062 E.10835 G1 X-14.949 Y53.268 E.00313 ;WIDTH:0.239399 G1 X-14.919 Y53.117 E.00247 ;WIDTH:0.280945 G1 X-14.894 Y53.063 E.00114 ;WIDTH:0.323703 G1 X-14.869 Y53.01 E.00135 ;WIDTH:0.345083 G1 X-14.862 Y53 E.0003 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.869 Y53.01 ;WIPE_END G1 X-17.631 Y45.895 Z22.4 F30000 G1 X-39.352 Y-10.052 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11356 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z22.4 F30000 G1 X-51.352 Y-52.052 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11356 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11356 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11356 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:22.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;22.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22.6 I-.529 J1.096 P1 F30000 G1 X50.051 Y-1.734 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X50.072 Y-1.736 E.00069 G3 X48.768 Y-1.232 I-.079 J1.737 E.31472 G3 X49.662 Y-1.701 I1.249 J1.295 E.03394 G1 X50.011 Y-1.731 E.01163 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11105 G3 X50.112 Y-2.141 I-.01 J2.141 E.0037 G3 X47.889 Y-.42 I-.117 J2.144 E.34585 G3 X49.96 Y-2.144 I2.1 J.417 E.09667 G1 X49.997 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X50 Y-2.589 E.00011 G1 X50.154 Y-2.574 E.00476 G1 X50.505 Y-2.539 E.01083 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.957 Y-2.585 E.01426 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.154 Y-2.574 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.877 ;WIPE_END G1 X49.382 Y-.741 Z22.6 F30000 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11105 G1 X49.194 Y-.539 E.00849 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.217 Y-.943 E.01075 G1 X49.69 Y-.915 E.01622 G1 X49.417 Y-.761 E.00963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.034 Y-.183 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.431184 G1 F11105 G1 X49.864 Y-.154 E.00546 G1 X49.793 Y0 E.00535 G1 X49.854 Y.146 E.005 G1 X50 Y.206 E.005 G1 X50.146 Y.146 E.005 G1 X50.205 Y.018 E.00446 G1 X50.154 Y-.136 E.00514 G1 X50.071 Y-.168 E.00281 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.83 Y.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11105 G1 X50.115 Y.58 E.00877 G1 X50.374 Y.454 E.00884 G1 X50.546 Y.226 E.00877 G1 X50.586 Y.055 E.00539 G1 X50.546 Y-.226 E.00874 G1 X50.363 Y-.463 E.00921 G1 X50.161 Y-.566 E.00695 G1 X49.774 Y-.546 E.01191 G1 X49.542 Y-.369 E.00896 G1 X49.42 Y-.115 E.00865 G1 X49.438 Y.172 E.00885 G1 X49.582 Y.418 E.00876 G1 X49.796 Y.543 E.00761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.611 Y1.285 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11105 G1 X50 Y1.349 E.0121 G1 X50.391 Y1.284 E.01217 G1 X50.749 Y1.122 E.0121 G1 X51.039 Y.85 E.01218 G1 X51.246 Y.516 E.01209 G1 X51.336 Y.129 E.0122 G1 X51.323 Y-.263 E.01207 G1 X51.181 Y-.637 E.01229 G1 X50.954 Y-.954 E.01198 G1 X50.606 Y-1.198 E.01308 G1 X50.272 Y-1.32 E.0109 G1 X49.725 Y-1.319 E.01683 G1 X49.355 Y-1.177 E.01216 G1 X49.046 Y-.954 E.01172 G1 X48.814 Y-.63 E.01225 G1 X48.677 Y-.263 E.01202 G1 X48.664 Y.133 E.01219 G1 X48.754 Y.516 E.01208 G1 X48.963 Y.853 E.01217 G1 X49.251 Y1.122 E.0121 G1 X49.575 Y1.268 E.01094 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.251 Y1.122 G1 X48.963 Y.853 G1 X48.754 Y.516 G1 X48.664 Y.133 G1 X48.677 Y-.263 G1 X48.7 Y-.323 ;WIPE_END G1 X46.198 Y-7.534 Z22.6 F30000 G1 X30.752 Y-52.052 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11105 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z22.6 F30000 G1 X18.752 Y-10.052 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11105 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z22.6 F30000 G1 X-2.945 Y22.045 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.893 Y30.402 Z22.6 F30000 G1 X-5.541 Y52.648 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X-5.54 Y52.59 E.00192 G3 X-4.573 Y51.262 I1.961 J.412 E.05614 G3 X-3.683 Y51.001 I.98 J1.69 E.03106 G3 X-5.565 Y52.737 I.105 J2.001 E.32556 G1 X-5.552 Y52.687 E.00174 G1 X-5.115 Y52.733 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X-5.094 Y52.592 E.00439 G3 X-4.171 Y51.549 I1.514 J.41 E.04432 G3 X-3.655 Y51.435 I.616 J1.563 E.0163 G3 X-5.134 Y52.794 I.076 J1.567 E.23586 G1 X-5.127 Y52.771 E.00074 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-5.094 Y52.592 G1 X-5.021 Y52.399 G1 X-4.93 Y52.215 G1 X-4.816 Y52.044 G1 X-4.68 Y51.89 G1 X-4.526 Y51.754 G1 X-4.355 Y51.64 G1 X-4.171 Y51.549 G1 X-3.976 Y51.483 G1 X-3.805 Y51.457 ;WIPE_END G1 X-11.428 Y51.836 Z22.6 F30000 G1 X-15.277 Y52.027 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X-15.187 Y52.237 E.00757 G3 X-18.033 Y51.262 I-1.852 J.766 E.30482 G3 X-17.143 Y51.001 I.98 J1.69 E.03106 G3 X-15.305 Y51.998 I.105 J2.001 E.073 G1 X-15.668 Y52.22 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X-15.59 Y52.403 E.00614 G3 X-17.631 Y51.549 I-1.45 J.598 E.22734 G3 X-17.115 Y51.435 I.616 J1.563 E.0163 G3 X-15.694 Y52.196 I.075 J1.567 E.05203 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.59 Y52.403 G1 X-15.513 Y52.594 G1 X-15.473 Y52.795 G1 X-15.46 Y53 G1 X-15.473 Y53.205 G1 X-15.513 Y53.406 G1 X-15.579 Y53.601 G1 X-15.737 Y53.885 G1 X-15.87 Y54.049 ;WIPE_END G1 X-8.313 Y52.975 Z22.6 F30000 G1 X-5.991 Y52.645 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X-5.93 Y52.645 E.00203 G1 X-5.744 Y52.099 E.01912 G3 X-5.744 Y53.901 I2.173 J.901 E.42886 G1 X-5.93 Y53.355 E.01912 G1 X-14.67 Y53.355 E.28994 G1 X-14.856 Y53.901 E.01912 G3 X-16.723 Y50.667 I-2.174 J-.901 E.34732 G3 X-14.856 Y52.099 I-.307 J2.334 E.08176 G1 X-14.67 Y52.645 E.01912 G1 X-6.031 Y52.645 E.28658 G1 X-6.241 Y52.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G3 X-6.241 Y53.79 I2.673 J.79 E.4889 G1 X-14.359 Y53.79 E.24942 G3 X-16.666 Y50.234 I-2.671 J-.793 E.38989 G3 X-14.359 Y52.21 I-.383 J2.783 E.09861 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.932 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F11105 G1 X-14.668 Y53 E.21565 G1 X-14.825 Y53.151 E.00537 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.668 Y53 G1 X-12.886 Y53 ;WIPE_END G1 X-15.84 Y45.962 Z22.6 F30000 G1 X-39.352 Y-10.052 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11105 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z22.6 F30000 G1 X-51.352 Y-52.052 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11105 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11105 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11105 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:22.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;22.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22.8 I-.529 J1.096 P1 F30000 G1 X50.052 Y-1.735 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10866 G1 X50.068 Y-1.736 E.00053 G3 X48.768 Y-1.232 I-.075 J1.737 E.31485 G3 X49.662 Y-1.701 I1.25 J1.297 E.03394 G1 X50.013 Y-1.732 E.01168 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10866 G3 X50.108 Y-2.141 I-.01 J2.141 E.00359 G3 X47.889 Y-.42 I-.114 J2.144 E.34598 G3 X49.96 Y-2.144 I2.101 J.417 E.09668 G1 X49.997 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10866 G1 X50 Y-2.589 E.0001 G1 X50.151 Y-2.574 E.00466 G1 X50.505 Y-2.539 E.01094 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.957 Y-2.585 E.01427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.151 Y-2.574 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.877 ;WIPE_END G1 X50.391 Y1.284 Z22.8 F30000 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F10866 G1 X50.749 Y1.122 E.0121 G1 X51.039 Y.85 E.01218 G1 X51.246 Y.516 E.01209 G1 X51.336 Y.129 E.0122 G1 X51.323 Y-.263 E.01207 G1 X51.181 Y-.637 E.01229 G1 X50.954 Y-.954 E.01198 G1 X50.606 Y-1.198 E.01308 G1 X50.272 Y-1.32 E.0109 G1 X49.725 Y-1.319 E.01682 G1 X49.355 Y-1.177 E.01216 G1 X49.046 Y-.954 E.01172 G1 X48.814 Y-.63 E.01225 G1 X48.677 Y-.263 E.01202 G1 X48.664 Y.133 E.01219 G1 X48.754 Y.516 E.01208 G1 X48.963 Y.853 E.01217 G1 X49.251 Y1.122 E.0121 G1 X49.611 Y1.285 E.01217 G1 X50 Y1.349 E.0121 G1 X50.351 Y1.291 E.01094 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.83 Y.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F10866 G1 X50.115 Y.58 E.00877 G1 X50.374 Y.454 E.00884 G1 X50.546 Y.226 E.00877 G1 X50.586 Y.055 E.00539 G1 X50.546 Y-.226 E.00874 G1 X50.363 Y-.463 E.00921 G1 X50.161 Y-.566 E.00695 G1 X49.774 Y-.546 E.01191 G1 X49.542 Y-.369 E.00896 G1 X49.42 Y-.115 E.00865 G1 X49.438 Y.172 E.00885 G1 X49.582 Y.418 E.00876 G1 X49.796 Y.543 E.00761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.034 Y-.183 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.431194 G1 F10866 G1 X49.864 Y-.154 E.00546 G1 X49.793 Y0 E.00535 G1 X49.854 Y.146 E.005 G1 X50 Y.206 E.005 G1 X50.146 Y.146 E.005 G1 X50.205 Y.018 E.00446 G1 X50.154 Y-.136 E.00514 G1 X50.071 Y-.168 E.00281 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.382 Y-.741 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F10866 G1 X49.194 Y-.539 E.00849 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.217 Y-.943 E.01075 G1 X49.69 Y-.915 E.01621 G1 X49.417 Y-.761 E.00963 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.69 Y-.915 G1 X50.217 Y-.943 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y-.137 ;WIPE_END G1 X48.184 Y-7.25 Z22.8 F30000 G1 X30.752 Y-52.052 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10866 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10866 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10866 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z22.8 F30000 G1 X18.752 Y-10.052 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10866 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10866 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10866 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z22.8 F30000 G1 X-2.945 Y22.045 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10866 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10866 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.834 Y30.406 Z22.8 F30000 G1 X-5.31 Y52.693 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10866 G1 X-5.284 Y52.541 E.00474 G3 X-4.455 Y51.467 I1.706 J.46 E.04279 G3 X-3.71 Y51.239 I.863 J1.487 E.02416 G3 X-5.33 Y52.768 I.132 J1.762 E.26712 G1 X-5.32 Y52.731 E.00117 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.758 Y52.716 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10866 G1 X-5.776 Y53 E.00945 G1 X-5.753 Y53.355 E.0118 G1 X-14.847 Y53.355 E.30166 G2 X-14.847 Y52.645 I-2.697 J-.355 E.02362 G1 X-5.753 Y52.645 E.30166 G1 X-5.755 Y52.676 E.00103 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-5.776 Y53 G1 X-5.753 Y53.355 G1 X-7.072 Y53.355 ;WIPE_END G1 X-14.625 Y52.256 Z22.8 F30000 G1 X-15.489 Y52.131 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10866 G1 X-15.404 Y52.326 E.00656 G3 X-17.915 Y51.467 I-1.634 J.676 E.24915 G3 X-17.17 Y51.239 I.863 J1.487 E.02416 G3 X-15.516 Y52.102 I.132 J1.763 E.0604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.404 Y52.326 G1 X-15.32 Y52.542 G1 X-15.275 Y52.769 G1 X-15.26 Y53 G1 X-15.275 Y53.231 G1 X-15.32 Y53.458 G1 X-15.394 Y53.678 G1 X-15.497 Y53.885 G1 X-15.568 Y53.992 ;WIPE_END G1 X-8.072 Y52.56 Z22.8 F30000 G1 X-6.241 Y52.21 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10866 G3 X-6.241 Y53.79 I2.673 J.79 E.48893 G1 X-14.359 Y53.79 E.24942 G3 X-16.666 Y50.234 I-2.671 J-.793 E.38989 G3 X-14.359 Y52.21 I-.383 J2.783 E.09861 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.132 Y53 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F10866 G1 X-14.468 Y53 E.20578 G1 X-14.625 Y53.151 E.00537 G1 X-15.128 Y53.569 F30000 ;WIDTH:0.624068 G1 F10866 G1 X-14.921 Y53.864 E.01705 G3 X-17.318 Y50.739 I-2.109 J-.864 E.45302 G1 X-17.03 Y50.72 E.01368 G1 X-16.751 Y50.738 E.01322 G1 X-16.44 Y50.798 E.01502 G1 X-16.158 Y50.894 E.01412 G1 X-15.907 Y51.017 E.01322 G1 X-15.642 Y51.191 E.01502 G1 X-15.418 Y51.388 E.01412 G1 X-15.221 Y51.612 E.01412 G1 X-15.056 Y51.86 E.01412 G1 X-14.924 Y52.128 E.01412 G1 X-15.128 Y52.431 E.01731 G1 X-5.472 Y52.431 F30000 ;WIDTH:0.624122 G1 F10866 G1 X-5.676 Y52.128 E.01731 G1 X-5.544 Y51.86 E.01412 G1 X-5.379 Y51.612 E.01412 G1 X-5.182 Y51.388 E.01412 G1 X-4.942 Y51.181 E.01502 G3 X-5.679 Y53.864 I1.37 J1.819 E.53588 G1 X-5.472 Y53.569 E.01705 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-5.679 Y53.864 G1 X-5.544 Y54.14 G1 X-5.366 Y54.402 G1 X-5.168 Y54.625 G1 X-4.958 Y54.809 G1 X-4.726 Y54.964 G1 X-4.584 Y55.035 ;WIPE_END G1 X-8.18 Y48.303 Z22.8 F30000 G1 X-39.352 Y-10.052 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10866 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10866 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10866 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z22.8 F30000 G1 X-51.352 Y-52.052 Z22.8 G1 Z22.4 G1 E.8 F1800 M73 P92 R5 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10866 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10866 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10866 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:22.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;22.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z23 I-.529 J1.096 P1 F30000 G1 X50.054 Y-1.736 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10809 G1 X50.065 Y-1.736 E.00036 G3 X48.768 Y-1.232 I-.071 J1.738 E.31499 G3 X49.662 Y-1.701 I1.251 J1.298 E.03394 G1 X50.014 Y-1.732 E.01174 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10809 G3 X50.105 Y-2.142 I-.01 J2.142 E.00348 G3 X47.889 Y-.42 I-.11 J2.144 E.34611 G3 X49.96 Y-2.144 I2.101 J.417 E.09668 G1 X49.997 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10809 G1 X50 Y-2.589 E.00009 G1 X50.147 Y-2.574 E.00455 G1 X50.505 Y-2.539 E.01104 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.957 Y-2.585 E.01428 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.147 Y-2.574 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.774 Y-1.877 ;WIPE_END G1 X49.382 Y-.741 Z23 F30000 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F10809 G1 X49.194 Y-.539 E.00849 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.217 Y-.943 E.01075 G1 X49.69 Y-.915 E.01621 G1 X49.417 Y-.761 E.00963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.034 Y-.183 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.431204 G1 F10809 G1 X49.864 Y-.154 E.00546 G1 X49.793 Y0 E.00535 G1 X49.854 Y.146 E.005 G1 X50 Y.206 E.005 G1 X50.146 Y.146 E.005 G1 X50.205 Y.018 E.00446 G1 X50.154 Y-.136 E.00514 G1 X50.071 Y-.168 E.00282 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.374 Y.454 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F10809 G1 X50.546 Y.226 E.00877 G1 X50.586 Y.055 E.00538 G1 X50.546 Y-.226 E.00874 G1 X50.363 Y-.463 E.00921 G1 X50.161 Y-.566 E.00695 G1 X49.774 Y-.546 E.01191 G1 X49.542 Y-.369 E.00896 G1 X49.42 Y-.115 E.00865 G1 X49.438 Y.172 E.00885 G1 X49.582 Y.418 E.00876 G1 X49.83 Y.563 E.00884 G1 X50.115 Y.58 E.00877 G1 X50.338 Y.471 E.00761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X51.039 Y.85 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F10809 G1 X51.246 Y.516 E.01209 G1 X51.336 Y.129 E.0122 G1 X51.323 Y-.263 E.01207 G1 X51.181 Y-.637 E.01229 G1 X50.954 Y-.954 E.01198 G1 X50.606 Y-1.198 E.01308 G1 X50.272 Y-1.32 E.0109 G1 X49.725 Y-1.319 E.01682 G1 X49.355 Y-1.177 E.01217 G1 X49.046 Y-.954 E.01172 G1 X48.814 Y-.63 E.01225 G1 X48.677 Y-.263 E.01202 G1 X48.664 Y.133 E.01219 G1 X48.754 Y.516 E.01208 G1 X48.963 Y.853 E.01217 G1 X49.251 Y1.122 E.0121 G1 X49.611 Y1.285 E.01217 G1 X50 Y1.349 E.0121 G1 X50.391 Y1.284 E.01217 G1 X50.749 Y1.122 E.0121 G1 X51.009 Y.878 E.01095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.749 Y1.122 G1 X50.391 Y1.284 G1 X50 Y1.349 G1 X49.611 Y1.285 G1 X49.251 Y1.122 G1 X49.204 Y1.078 ;WIPE_END G1 X46.7 Y-6.132 Z23 F30000 G1 X30.752 Y-52.052 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10809 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10809 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10809 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z23 F30000 G1 X18.752 Y-10.052 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10809 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10809 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10809 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z23 F30000 G1 X-2.945 Y22.045 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10809 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10809 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.884 Y30.402 Z23 F30000 G1 X-5.506 Y52.652 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10809 G1 X-5.478 Y52.489 E.0051 G3 X-4.555 Y51.294 I1.901 J.513 E.04761 G3 X-3.765 Y51.042 I.963 J1.662 E.02569 G3 X-5.528 Y52.742 I.188 J1.96 E.29882 G1 X-5.515 Y52.691 E.00162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.957 Y52.701 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10809 G1 X-5.976 Y53 E.00994 G1 X-5.953 Y53.355 E.0118 G1 X-14.647 Y53.355 E.28839 G2 X-14.647 Y52.645 I-2.696 J-.355 E.02362 G1 X-5.953 Y52.645 E.28839 G1 X-5.954 Y52.661 E.00054 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-5.976 Y53 G1 X-5.953 Y53.355 G1 X-7.258 Y53.355 ;WIPE_END G1 X-14.791 Y52.127 Z23 F30000 G1 X-15.31 Y52.043 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10809 G1 X-15.218 Y52.25 E.00696 G3 X-18.015 Y51.294 I-1.819 J.752 E.27727 G3 X-17.225 Y51.042 I.963 J1.662 E.02569 G3 X-15.336 Y52.012 I.187 J1.959 E.06892 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.218 Y52.25 G1 X-15.127 Y52.49 G1 X-15.076 Y52.743 G1 X-15.06 Y53 G1 X-15.076 Y53.257 G1 X-15.127 Y53.51 G1 X-15.21 Y53.754 G1 X-15.293 Y53.924 ;WIPE_END G1 X-7.794 Y52.504 Z23 F30000 G1 X-6.241 Y52.21 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10809 G3 X-6.241 Y53.79 I2.673 J.79 E.48894 G1 X-14.359 Y53.79 E.24942 G3 X-16.666 Y50.234 I-2.671 J-.793 E.3899 G3 X-14.359 Y52.21 I-.383 J2.783 E.09861 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.884 Y52.427 F30000 ;TYPE:Gap infill ;WIDTH:0.425235 G1 F10809 G3 X-1.369 Y52.095 I2.312 J.583 E.18578 G1 X-1.271 Y52.384 E.00951 G1 X-1.213 Y52.677 E.00931 G1 X-1.19 Y53 E.01009 G1 X-1.211 Y53.311 E.0097 G1 X-1.269 Y53.604 E.00931 G1 X-1.377 Y53.922 E.01047 G1 X-1.509 Y54.19 E.00931 G1 X-1.675 Y54.438 E.00931 G1 X-1.897 Y54.691 E.01047 G1 X-2.121 Y54.888 E.00931 G1 X-2.38 Y55.061 E.0097 G1 X-2.659 Y55.199 E.0097 G1 X-2.942 Y55.295 E.00931 G1 X-3.272 Y55.36 E.01047 G1 X-3.57 Y55.38 E.00931 G1 X-3.881 Y55.359 E.0097 G1 X-4.186 Y55.299 E.0097 G1 X-4.469 Y55.203 E.00931 G1 X-4.76 Y55.061 E.01009 G1 X-5.019 Y54.888 E.0097 G1 X-5.243 Y54.691 E.00931 G1 X-5.458 Y54.449 E.01009 G1 X-5.631 Y54.19 E.0097 G1 X-5.763 Y53.922 E.00931 G1 X-5.884 Y53.573 E.01152 G1 X-6.332 Y53 F30000 ;WIDTH:0.345842 G1 F10809 G1 X-14.268 Y53 E.1959 G1 X-14.425 Y53.151 E.00537 G1 X-14.716 Y53.573 F30000 ;WIDTH:0.425283 G1 F10809 G1 X-14.831 Y53.911 E.01113 G1 X-14.976 Y54.2 E.01009 G1 X-15.142 Y54.449 E.00931 G1 X-15.339 Y54.673 E.00931 G1 X-15.592 Y54.895 E.01047 G1 X-15.84 Y55.061 E.00931 G1 X-16.108 Y55.193 E.00931 G1 X-16.414 Y55.299 E.01009 G1 X-16.732 Y55.36 E.01009 G1 X-17.03 Y55.38 E.00931 G1 X-17.341 Y55.359 E.0097 G1 X-17.646 Y55.299 E.0097 G1 X-17.929 Y55.203 E.00931 G1 X-18.22 Y55.061 E.01009 G1 X-18.488 Y54.88 E.01009 G1 X-18.713 Y54.683 E.00931 G1 X-18.91 Y54.458 E.00931 G1 X-19.091 Y54.19 E.01009 G1 X-19.233 Y53.899 E.01009 G1 X-19.329 Y53.616 E.00931 G1 X-19.387 Y53.323 E.00931 G1 X-19.41 Y53 E.01009 G1 X-19.389 Y52.689 E.0097 G1 X-19.331 Y52.396 E.00931 G1 X-19.229 Y52.089 E.01009 G1 X-19.084 Y51.8 E.01009 G1 X-18.918 Y51.551 E.00931 G1 X-18.721 Y51.327 E.00931 G1 X-18.479 Y51.112 E.01009 G1 X-18.209 Y50.933 E.01009 G1 X-17.941 Y50.801 E.00931 G1 X-17.658 Y50.705 E.00931 G1 X-17.341 Y50.641 E.01009 G1 X-17.03 Y50.62 E.0097 G1 X-16.732 Y50.64 E.00931 G1 X-16.414 Y50.701 E.01009 G1 X-16.108 Y50.807 E.01009 G1 X-15.84 Y50.939 E.00931 G1 X-15.592 Y51.105 E.00931 G1 X-15.339 Y51.327 E.01047 G1 X-15.142 Y51.551 E.00931 G1 X-14.976 Y51.8 E.00931 G1 X-14.831 Y52.089 E.01009 G1 X-14.716 Y52.427 E.01113 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.831 Y52.089 G1 X-14.976 Y51.8 G1 X-15.142 Y51.551 G1 X-15.339 Y51.327 G1 X-15.592 Y51.105 G1 X-15.84 Y50.939 G1 X-15.918 Y50.901 ;WIPE_END G1 X-18.657 Y43.777 Z23 F30000 G1 X-39.352 Y-10.052 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10809 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10809 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10809 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z23 F30000 G1 X-51.352 Y-52.052 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10809 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10809 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10809 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:22.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;22.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z23.2 I-.529 J1.096 P1 F30000 G1 X50.056 Y-1.736 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11027 G1 X50.062 Y-1.737 E.00019 G3 X48.768 Y-1.232 I-.068 J1.738 E.31513 G3 X49.662 Y-1.701 I1.252 J1.3 E.03394 G1 X50.016 Y-1.733 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11027 G3 X50.101 Y-2.142 I-.01 J2.142 E.00337 G3 X47.889 Y-.42 I-.107 J2.145 E.34624 G3 X49.96 Y-2.145 I2.101 J.417 E.09668 G1 X49.998 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11027 G1 X50 Y-2.589 E.00007 G1 X50.144 Y-2.575 E.00445 G1 X50.505 Y-2.539 E.01114 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.958 Y-2.585 E.01429 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.144 Y-2.575 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.775 Y-1.877 ;WIPE_END G1 X49.382 Y-.741 Z23.2 F30000 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F11027 G1 X49.194 Y-.539 E.00849 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.217 Y-.943 E.01075 G1 X49.69 Y-.915 E.01621 G1 X49.417 Y-.761 E.00964 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.034 Y-.183 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.431214 G1 F11027 G1 X49.864 Y-.154 E.00546 G1 X49.793 Y0 E.00535 G1 X49.854 Y.146 E.005 G1 X50 Y.206 E.005 G1 X50.146 Y.146 E.005 G1 X50.205 Y.018 E.00446 G1 X50.154 Y-.136 E.00514 G1 X50.071 Y-.169 E.00282 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.83 Y.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F11027 G1 X50.115 Y.58 E.00877 G1 X50.374 Y.454 E.00884 G1 X50.546 Y.226 E.00877 G1 X50.586 Y.055 E.00539 G1 X50.546 Y-.226 E.00874 G1 X50.363 Y-.463 E.00921 G1 X50.161 Y-.566 E.00696 G1 X49.774 Y-.546 E.01191 G1 X49.542 Y-.369 E.00896 G1 X49.42 Y-.115 E.00865 G1 X49.438 Y.172 E.00885 G1 X49.582 Y.418 E.00876 G1 X49.796 Y.543 E.00761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.611 Y1.285 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F11027 G1 X50 Y1.349 E.0121 G1 X50.391 Y1.284 E.01217 G1 X50.749 Y1.122 E.0121 G1 X51.039 Y.85 E.01218 G1 X51.246 Y.516 E.01209 G1 X51.336 Y.129 E.0122 G1 X51.323 Y-.263 E.01207 G1 X51.181 Y-.637 E.01229 G1 X50.954 Y-.954 E.01198 G1 X50.606 Y-1.198 E.01307 G1 X50.272 Y-1.32 E.0109 G1 X49.725 Y-1.319 E.01681 G1 X49.355 Y-1.177 E.01217 G1 X49.046 Y-.954 E.01172 G1 X48.814 Y-.63 E.01225 G1 X48.677 Y-.263 E.01202 G1 X48.664 Y.133 E.01219 G1 X48.754 Y.516 E.01208 G1 X48.963 Y.853 E.01217 G1 X49.251 Y1.122 E.0121 G1 X49.575 Y1.268 E.01094 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.251 Y1.122 G1 X48.963 Y.853 G1 X48.754 Y.516 G1 X48.664 Y.133 G1 X48.677 Y-.263 G1 X48.7 Y-.323 ;WIPE_END G1 X46.198 Y-7.534 Z23.2 F30000 G1 X30.752 Y-52.052 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11027 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11027 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11027 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z23.2 F30000 G1 X18.752 Y-10.052 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11027 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11027 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11027 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z23.2 F30000 G1 X-2.945 Y22.045 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11027 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11027 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-3.934 Y30.398 Z23.2 F30000 G1 X-5.701 Y52.612 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11027 G1 X-5.669 Y52.438 E.00546 G3 X-4.401 Y50.995 I2.094 J.562 E.06116 G3 X-3.832 Y50.847 I.808 J1.937 E.01811 G3 X-5.725 Y52.716 I.257 J2.153 E.33067 G1 X-5.71 Y52.651 E.00205 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.156 Y52.687 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11027 G1 X-6.176 Y53 E.01042 G1 X-6.153 Y53.355 E.0118 G1 X-14.447 Y53.355 E.27512 G2 X-14.447 Y52.645 I-2.696 J-.355 E.02362 G1 X-6.153 Y52.645 E.27512 G1 X-6.153 Y52.647 E.00005 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-6.176 Y53 G1 X-6.153 Y53.355 G1 X-7.443 Y53.355 ;WIPE_END G1 X-14.952 Y51.987 Z23.2 F30000 G1 X-15.131 Y51.954 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11027 G1 X-15.031 Y52.172 E.00737 G3 X-17.861 Y50.995 I-2.004 J.828 E.31409 M73 P93 R5 G3 X-17.292 Y50.847 I.808 J1.937 E.01811 G3 X-15.156 Y51.918 I.257 J2.153 E.07778 G1 X-15.154 Y51.921 E.00012 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.031 Y52.172 G1 X-14.934 Y52.438 G1 X-14.878 Y52.717 G1 X-14.86 Y53 G1 X-14.878 Y53.283 G1 X-14.934 Y53.562 G1 X-15.025 Y53.831 G1 X-15.033 Y53.846 ;WIPE_END G1 X-7.529 Y52.45 Z23.2 F30000 G1 X-6.241 Y52.21 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11027 G3 X-6.241 Y53.79 I2.673 J.79 E.48897 G1 X-14.359 Y53.79 E.24942 G3 X-16.666 Y50.234 I-2.671 J-.793 E.3899 G3 X-14.359 Y52.21 I-.383 J2.783 E.09861 G1 X-6.281 Y52.21 E.24819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.958 Y52.336 F30000 ;TYPE:Gap infill ;WIDTH:0.22578 G1 F11027 G3 X-5.335 Y54.741 I2.389 J.664 E.19334 ;WIDTH:0.225144 G1 X-5.537 Y54.51 E.00456 G1 X-5.718 Y54.24 E.00482 G1 X-5.861 Y53.949 E.00482 G1 X-5.958 Y53.664 E.00447 G1 X-5.941 Y53.64 E.00044 ;WIDTH:0.166922 G1 X-5.889 Y53.573 E.00086 G1 X-6.532 Y53 F30000 ;WIDTH:0.345842 G1 F11027 G1 X-14.068 Y53 E.18603 G1 X-14.225 Y53.151 E.00537 G1 X-14.711 Y53.573 F30000 ;WIDTH:0.177471 G1 F11027 G1 X-14.659 Y53.64 E.00093 ;WIDTH:0.201582 G1 X-14.642 Y53.664 E.00038 ;WIDTH:0.225886 G3 X-15.265 Y51.259 I-2.389 J-.664 E.19345 ;WIDTH:0.225144 G1 X-15.063 Y51.49 E.00456 G1 X-14.882 Y51.76 E.00482 G1 X-14.739 Y52.051 E.00482 G1 X-14.642 Y52.336 E.00447 G1 X-14.659 Y52.36 E.00044 ;WIDTH:0.166913 G1 X-14.711 Y52.427 E.00086 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.659 Y52.36 ;WIPE_END G1 X-7.027 Y52.339 Z23.2 F30000 G1 X-5.958 Y52.336 Z23.2 G1 Z22.8 G1 E.8 F1800 ;WIDTH:0.20159 G1 F11027 G1 X-5.941 Y52.36 E.00038 ;WIDTH:0.177488 G1 X-5.889 Y52.427 E.00093 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-5.941 Y52.36 ;WIPE_END G1 X-9.543 Y45.631 Z23.2 F30000 G1 X-39.352 Y-10.052 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11027 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11027 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11027 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z23.2 F30000 G1 X-51.352 Y-52.052 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11027 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11027 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11027 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:23 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;23 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;23 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z23.4 I-.529 J1.096 P1 F30000 G1 X50.058 Y-1.737 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8579 G3 X48.768 Y-1.232 I-.064 J1.738 E.31527 G3 X50.018 Y-1.737 I1.253 J1.302 E.04585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8579 G3 X50.098 Y-2.142 I.013 J2.177 E.00325 G3 X48.012 Y-.823 I-.105 J2.144 E.36021 G3 X49.96 Y-2.143 I2.001 J.857 E.08247 G1 X49.998 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8579 G1 X50 Y-2.589 E.00005 G1 X50.141 Y-2.575 E.00435 G1 X50.505 Y-2.539 E.01125 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.958 Y-2.585 E.01431 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.141 Y-2.575 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.775 Y-1.876 ;WIPE_END G1 X49.382 Y-.741 Z23.4 F30000 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8579 G1 X49.194 Y-.539 E.00849 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.217 Y-.943 E.01075 G1 X49.69 Y-.915 E.01621 G1 X49.417 Y-.761 E.00964 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.034 Y-.183 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.431224 G1 F8579 G1 X49.864 Y-.154 E.00546 G1 X49.793 Y0 E.00535 G1 X49.854 Y.146 E.005 G1 X50 Y.206 E.005 G1 X50.146 Y.146 E.005 G1 X50.205 Y.018 E.00446 G1 X50.154 Y-.136 E.00514 G1 X50.071 Y-.169 E.00282 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.83 Y.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8579 G1 X50.115 Y.58 E.00877 G1 X50.374 Y.454 E.00884 G1 X50.546 Y.226 E.00877 G1 X50.586 Y.055 E.00539 G1 X50.546 Y-.226 E.00874 G1 X50.363 Y-.463 E.00921 G1 X50.161 Y-.566 E.00696 G1 X49.774 Y-.546 E.01191 G1 X49.542 Y-.369 E.00896 G1 X49.42 Y-.115 E.00865 G1 X49.438 Y.172 E.00885 G1 X49.582 Y.418 E.00876 G1 X49.796 Y.543 E.00761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.611 Y1.285 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8579 G1 X50 Y1.349 E.0121 G1 X50.391 Y1.284 E.01217 G1 X50.749 Y1.122 E.0121 G1 X51.039 Y.85 E.01218 G1 X51.246 Y.516 E.01209 G1 X51.336 Y.129 E.0122 G1 X51.323 Y-.263 E.01207 G1 X51.181 Y-.637 E.01229 G1 X50.954 Y-.954 E.01198 G1 X50.606 Y-1.198 E.01307 G1 X50.272 Y-1.32 E.01091 G1 X49.725 Y-1.319 E.01681 G1 X49.355 Y-1.177 E.01218 G1 X49.046 Y-.954 E.01172 G1 X48.814 Y-.63 E.01225 G1 X48.677 Y-.263 E.01202 G1 X48.664 Y.133 E.01219 G1 X48.754 Y.516 E.01208 G1 X48.963 Y.853 E.01217 G1 X49.251 Y1.122 E.0121 G1 X49.575 Y1.268 E.01094 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.251 Y1.122 G1 X48.963 Y.853 G1 X48.754 Y.516 G1 X48.664 Y.133 G1 X48.677 Y-.263 G1 X48.7 Y-.323 ;WIPE_END G1 X46.198 Y-7.534 Z23.4 F30000 G1 X30.752 Y-52.052 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8579 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8579 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8579 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z23.4 F30000 G1 X18.752 Y-10.052 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8579 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8579 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8579 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z23.4 F30000 G1 X-2.945 Y22.045 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8579 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8579 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z23.4 F30000 G1 X-39.352 Y-10.052 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8579 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8579 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8579 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z23.4 F30000 G1 X-51.352 Y-52.052 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8579 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8579 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8579 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:23.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;23.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z23.6 I-.529 J1.096 P1 F30000 G1 X50.055 Y-1.737 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8584 G3 X49.032 Y-1.449 I-.063 J1.737 E.32652 G3 X50.015 Y-1.739 I.952 J1.419 E.03453 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8584 G3 X50.095 Y-2.143 I.014 J2.178 E.00314 G3 X48.012 Y-.823 I-.101 J2.144 E.36034 G3 X49.96 Y-2.143 I2.002 J.857 E.08247 G1 X49.999 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8584 G1 X50 Y-2.589 E.00003 G1 X50.137 Y-2.575 E.00424 G1 X50.505 Y-2.539 E.01135 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.959 Y-2.585 E.01433 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-2.589 G1 X50.137 Y-2.575 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.776 Y-1.876 ;WIPE_END G1 X51.039 Y.85 Z23.6 F30000 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8584 G1 X51.246 Y.516 E.01209 G1 X51.336 Y.129 E.0122 G1 X51.323 Y-.263 E.01207 G1 X51.181 Y-.637 E.01229 G1 X50.954 Y-.954 E.01198 G1 X50.606 Y-1.198 E.01307 G1 X50.272 Y-1.32 E.01091 G1 X49.725 Y-1.319 E.01681 G1 X49.355 Y-1.177 E.01218 G1 X49.046 Y-.954 E.01172 G1 X48.814 Y-.63 E.01225 G1 X48.677 Y-.263 E.01203 G1 X48.664 Y.133 E.01219 G1 X48.754 Y.516 E.01208 G1 X48.963 Y.853 E.01217 G1 X49.251 Y1.122 E.0121 G1 X49.611 Y1.285 E.01217 G1 X50 Y1.349 E.0121 G1 X50.391 Y1.284 E.01217 G1 X50.749 Y1.122 E.0121 G1 X51.009 Y.878 E.01095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.83 Y.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8584 G1 X50.115 Y.58 E.00877 G1 X50.374 Y.454 E.00884 G1 X50.546 Y.226 E.00877 G1 X50.586 Y.055 E.00538 G1 X50.546 Y-.226 E.00874 G1 X50.363 Y-.463 E.00921 G1 X50.161 Y-.566 E.00696 G1 X49.774 Y-.546 E.01191 G1 X49.542 Y-.369 E.00896 G1 X49.42 Y-.115 E.00865 G1 X49.438 Y.172 E.00885 G1 X49.582 Y.418 E.00876 G1 X49.796 Y.543 E.00761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.034 Y-.183 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.431236 G1 F8584 G1 X49.864 Y-.154 E.00546 G1 X49.793 Y0 E.00535 G1 X49.854 Y.146 E.005 G1 X50 Y.206 E.005 G1 X50.146 Y.146 E.005 G1 X50.205 Y.018 E.00446 G1 X50.154 Y-.136 E.00514 G1 X50.071 Y-.169 E.00282 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.382 Y-.741 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8584 G1 X49.194 Y-.539 E.00849 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.217 Y-.943 E.01076 G1 X49.69 Y-.915 E.01621 G1 X49.417 Y-.761 E.00964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.69 Y-.915 G1 X50.217 Y-.943 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y-.137 ;WIPE_END G1 X48.184 Y-7.25 Z23.6 F30000 G1 X30.752 Y-52.052 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8584 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8584 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8584 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z23.6 F30000 G1 X18.752 Y-10.052 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8584 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8584 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8584 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z23.6 F30000 G1 X-2.945 Y22.045 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8584 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8584 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z23.6 F30000 G1 X-39.352 Y-10.052 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8584 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8584 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8584 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z23.6 F30000 G1 X-51.352 Y-52.052 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8584 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8584 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8584 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:23.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;23.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z23.8 I-.529 J1.096 P1 F30000 G1 X50.052 Y-1.738 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G3 X49.032 Y-1.449 I-.059 J1.738 E.32667 G3 X50.012 Y-1.739 I.953 J1.42 E.03442 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G3 X50.091 Y-2.143 I.014 J2.178 E.00303 G3 X48.012 Y-.823 I-.098 J2.145 E.36047 G3 X49.96 Y-2.144 I2.002 J.858 E.08247 G1 X50.001 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X50.134 Y-2.576 E.00411 G1 X50.505 Y-2.539 E.01146 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.961 Y-2.585 E.0144 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.134 Y-2.576 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.778 Y-1.874 ;WIPE_END G1 X49.611 Y1.285 Z23.8 F30000 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8587 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.284 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01217 G1 X50.954 Y-.954 E.01211 G1 X50.629 Y-1.186 E.01228 G1 X50.263 Y-1.323 E.01199 G1 X49.732 Y-1.321 E.01632 G1 X49.364 Y-1.182 E.0121 G1 X49.046 Y-.954 E.01202 G1 X48.816 Y-.632 E.01216 G1 X48.677 Y-.263 E.01211 G1 X48.664 Y.132 E.01215 G1 X48.754 Y.516 E.01212 G1 X48.963 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.574 Y1.268 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8587 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00882 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.371 Y-.456 E.00888 G1 X50.115 Y-.58 E.00873 G1 X49.819 Y-.56 E.00912 G1 X49.582 Y-.418 E.00849 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.028 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440081 G1 F8587 G1 X49.871 Y-.154 E.00529 G1 X49.8 Y-.019 E.00494 G1 X49.845 Y.128 E.00497 G1 X49.981 Y.2 E.00498 G1 X50.128 Y.155 E.00498 G1 X50.2 Y.019 E.00499 G1 X50.155 Y-.129 E.00501 G1 X50.063 Y-.179 E.00338 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.801 Y-.948 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8587 G1 X49.461 Y-.806 E.01132 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.841 Y-.949 E.01069 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.898 Y.317 ;WIPE_END G1 X48.158 Y-6.807 Z23.8 F30000 G1 X30.752 Y-52.052 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z23.8 F30000 G1 X18.752 Y-10.052 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z23.8 F30000 G1 X-2.945 Y22.045 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z23.8 F30000 G1 X-39.352 Y-10.052 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z23.8 F30000 G1 X-51.352 Y-52.052 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:23.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;23.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24 I-.529 J1.096 P1 F30000 G1 X50.048 Y-1.738 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8575 G3 X49.032 Y-1.449 I-.055 J1.738 E.32683 G3 X50.008 Y-1.739 I.953 J1.421 E.03431 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8575 G3 X50.088 Y-2.143 I.015 J2.179 E.00292 G3 X48.012 Y-.823 I-.094 J2.145 E.36061 G3 X49.96 Y-2.144 I2.003 J.858 E.08247 G1 X50.003 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8575 G1 X50.131 Y-2.576 E.00395 G1 X50.505 Y-2.539 E.01156 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.0156 G1 X49.495 Y-2.539 E.01559 G1 X49.963 Y-2.585 E.01445 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.131 Y-2.576 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.779 Y-1.873 ;WIPE_END G1 X49.802 Y-.949 Z24 F30000 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8575 G1 X49.461 Y-.806 E.01134 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.842 Y-.949 E.01068 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.025 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44024 G1 F8575 G1 X49.857 Y-.143 E.00572 G1 X49.798 Y0 E.00501 G1 X49.857 Y.143 E.00501 G1 X50 Y.202 E.005 G1 X50.143 Y.143 E.005 G1 X50.2 Y.019 E.00441 G1 X50.155 Y-.129 E.00501 G1 X50.06 Y-.18 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8575 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.371 Y-.456 E.00887 G1 X50.115 Y-.58 E.00874 G1 X49.82 Y-.56 E.0091 G1 X49.582 Y-.418 E.00851 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X48.963 Y.852 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8575 G1 X49.251 Y1.122 E.01213 G1 X49.611 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.284 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01216 G1 X50.954 Y-.954 E.01211 G1 X50.629 Y-1.186 E.01227 G1 X50.263 Y-1.323 E.012 G1 X49.732 Y-1.322 E.01631 G1 X49.364 Y-1.182 E.0121 G1 X49.046 Y-.954 E.01202 G1 X48.816 Y-.632 E.01216 G1 X48.677 Y-.263 E.01211 G1 X48.664 Y.132 E.01215 G1 X48.754 Y.516 E.01212 G1 X48.941 Y.818 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.754 Y.516 G1 X48.664 Y.132 G1 X48.677 Y-.263 G1 X48.816 Y-.632 G1 X49.046 Y-.954 G1 X49.099 Y-.992 ;WIPE_END G1 X46.518 Y-8.175 Z24 F30000 G1 X30.752 Y-52.052 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8575 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8575 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8575 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z24 F30000 G1 X18.752 Y-10.052 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8575 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8575 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8575 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z24 F30000 G1 X-2.945 Y22.045 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8575 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8575 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z24 F30000 G1 X-39.352 Y-10.052 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8575 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 M73 P93 R4 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8575 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8575 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z24 F30000 G1 X-51.352 Y-52.052 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8575 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8575 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8575 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:23.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;23.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24.2 I-.529 J1.096 P1 F30000 G1 X50.045 Y-1.738 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G3 X49.032 Y-1.449 I-.051 J1.738 E.32698 G3 X50.005 Y-1.739 I.954 J1.423 E.0342 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G3 X50.085 Y-2.144 I.015 J2.18 E.00281 G3 X48.012 Y-.823 I-.09 J2.145 E.36074 G3 X49.96 Y-2.144 I2.003 J.859 E.08247 G1 X50.004 Y-2.589 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X50.127 Y-2.576 E.0038 G1 X50.505 Y-2.539 E.01166 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.964 Y-2.585 E.0145 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.127 Y-2.576 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.78 Y-1.872 ;WIPE_END G1 X49.611 Y1.285 Z24.2 F30000 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8587 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.284 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.634 E.01216 G1 X50.954 Y-.954 E.01211 G1 X50.629 Y-1.186 E.01226 G1 X50.263 Y-1.323 E.01201 G1 X49.733 Y-1.322 E.0163 G1 X49.364 Y-1.182 E.0121 G1 X49.046 Y-.954 E.01203 G1 X48.816 Y-.632 E.01216 G1 X48.677 Y-.263 E.01211 G1 X48.664 Y.132 E.01215 G1 X48.754 Y.516 E.01212 G1 X48.963 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.574 Y1.268 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8587 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00706 G1 X50.546 Y-.226 E.00879 G1 X50.372 Y-.456 E.00887 G1 X50.115 Y-.58 E.00874 G1 X49.82 Y-.56 E.00909 G1 X49.582 Y-.418 E.00852 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.022 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440414 G1 F8587 G1 X49.857 Y-.143 E.00562 G1 X49.798 Y0 E.005 G1 X49.857 Y.143 E.005 G1 X50 Y.202 E.005 G1 X50.143 Y.143 E.005 G1 X50.2 Y.019 E.00441 G1 X50.155 Y-.128 E.00501 G1 X50.057 Y-.18 E.00358 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.802 Y-.949 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8587 G1 X49.461 Y-.806 E.01136 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.842 Y-.949 E.01066 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.898 Y.318 ;WIPE_END G1 X48.158 Y-6.806 Z24.2 F30000 G1 X30.752 Y-52.052 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z24.2 F30000 G1 X18.752 Y-10.052 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 M73 P94 R4 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z24.2 F30000 G1 X-2.945 Y22.045 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z24.2 F30000 G1 X-39.352 Y-10.052 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z24.2 F30000 G1 X-51.352 Y-52.052 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:24 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;24 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;24 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24.4 I-.529 J1.096 P1 F30000 G1 X50.041 Y-1.739 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G3 X49.032 Y-1.449 I-.048 J1.737 E.32682 G3 X50.002 Y-1.74 I.955 J1.424 E.03409 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G3 X50.081 Y-2.144 I.016 J2.18 E.0027 G3 X48.012 Y-.823 I-.087 J2.146 E.36088 G3 X49.96 Y-2.144 I2.004 J.859 E.08247 G1 X50.006 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X50.124 Y-2.577 E.00365 G1 X50.505 Y-2.539 E.01177 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.966 Y-2.586 E.01455 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.124 Y-2.577 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.781 Y-1.871 ;WIPE_END G1 X49.611 Y1.285 Z24.4 F30000 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8587 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.183 Y-.633 E.01216 G1 X50.954 Y-.954 E.01211 G1 X50.629 Y-1.186 E.01225 G1 X50.263 Y-1.323 E.01202 G1 X49.733 Y-1.322 E.0163 G1 X49.364 Y-1.182 E.0121 G1 X49.046 Y-.954 E.01204 G1 X48.816 Y-.632 E.01216 G1 X48.677 Y-.263 E.01211 G1 X48.664 Y.132 E.01215 G1 X48.754 Y.516 E.01212 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.574 Y1.268 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8587 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.00879 G1 X50.372 Y-.456 E.00886 G1 X50.115 Y-.58 E.00875 G1 X49.821 Y-.56 E.00907 G1 X49.582 Y-.418 E.00854 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.018 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440574 G1 F8587 G1 X49.857 Y-.143 E.00553 G1 X49.798 Y0 E.005 G1 X49.857 Y.143 E.005 G1 X50 Y.202 E.00501 G1 X50.143 Y.143 E.005 G1 X50.2 Y.019 E.00441 G1 X50.155 Y-.128 E.005 G1 X50.054 Y-.18 E.00367 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.803 Y-.949 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8587 G1 X49.461 Y-.806 E.01138 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.843 Y-.949 E.01064 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.898 Y.318 ;WIPE_END G1 X48.158 Y-6.805 Z24.4 F30000 G1 X30.752 Y-52.052 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z24.4 F30000 G1 X18.752 Y-10.052 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z24.4 F30000 G1 X-2.945 Y22.045 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z24.4 F30000 G1 X-39.352 Y-10.052 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z24.4 F30000 G1 X-51.352 Y-52.052 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:24.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;24.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24.6 I-.529 J1.096 P1 F30000 G1 X50.038 Y-1.739 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G3 X49.032 Y-1.449 I-.044 J1.737 E.32694 G3 X49.998 Y-1.74 I.956 J1.426 E.03398 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G3 X50.078 Y-2.144 I.017 J2.181 E.00258 G3 X48.012 Y-.823 I-.083 J2.146 E.36102 G3 X49.96 Y-2.144 I2.005 J.86 E.08247 G1 X50.008 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X50.121 Y-2.577 E.00349 G1 X50.505 Y-2.539 E.01187 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.968 Y-2.586 E.0146 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.121 Y-2.577 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.783 Y-1.87 ;WIPE_END G1 X50.39 Y1.285 Z24.6 F30000 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8586 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01212 G1 X51.184 Y-.633 E.01216 G1 X50.954 Y-.954 E.01211 G1 X50.63 Y-1.185 E.01224 G1 X50.263 Y-1.323 E.01203 G1 X49.733 Y-1.322 E.01629 G1 X49.365 Y-1.182 E.01211 G1 X49.046 Y-.954 E.01205 G1 X48.816 Y-.632 E.01216 G1 X48.677 Y-.263 E.01211 G1 X48.664 Y.132 E.01215 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.611 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.35 Y1.291 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8586 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.00879 G1 X50.372 Y-.456 E.00886 G1 X50.115 Y-.58 E.00875 G1 X49.821 Y-.56 E.00905 G1 X49.582 Y-.418 E.00856 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.015 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440733 G1 F8586 G1 X49.857 Y-.143 E.00543 G1 X49.798 Y0 E.005 G1 X49.857 Y.143 E.00501 G1 X50 Y.202 E.00501 G1 X50.143 Y.143 E.005 G1 X50.2 Y.019 E.00441 G1 X50.155 Y-.128 E.005 G1 X50.051 Y-.181 E.00377 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.803 Y-.949 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8586 G1 X49.461 Y-.806 E.0114 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.843 Y-.949 E.01062 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.898 Y.319 ;WIPE_END G1 X48.157 Y-6.805 Z24.6 F30000 G1 X30.752 Y-52.052 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z24.6 F30000 G1 X18.752 Y-10.052 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z24.6 F30000 G1 X-2.945 Y22.045 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z24.6 F30000 G1 X-39.352 Y-10.052 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z24.6 F30000 G1 X-51.352 Y-52.052 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:24.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;24.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24.8 I-.529 J1.096 P1 F30000 G1 X50.035 Y-1.739 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G3 X49.032 Y-1.449 I-.041 J1.738 E.32706 G3 X49.995 Y-1.74 I.957 J1.427 E.03387 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.146 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G3 X50.075 Y-2.145 I-.012 J2.136 E.00248 G3 X48.211 Y-1.196 I-.081 J2.145 E.37496 G3 X49.96 Y-2.146 I1.777 J1.186 E.0687 G1 X50.009 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X50.117 Y-2.577 E.00334 G1 X50.505 Y-2.539 E.01198 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.969 Y-2.586 E.01465 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.117 Y-2.577 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.784 Y-1.869 ;WIPE_END G1 X49.61 Y1.285 Z24.8 F30000 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8587 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01215 G1 X51.323 Y-.263 E.01213 G1 X51.184 Y-.633 E.01216 G1 X50.954 Y-.954 E.01212 G1 X50.63 Y-1.185 E.01223 G1 X50.263 Y-1.323 E.01204 G1 X49.733 Y-1.322 E.01628 G1 X49.365 Y-1.183 E.01211 G1 X49.046 Y-.954 E.01205 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.574 Y1.268 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8587 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.372 Y-.456 E.00885 G1 X50.115 Y-.58 E.00876 G1 X49.822 Y-.561 E.00903 G1 X49.582 Y-.418 E.00858 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.012 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.440895 G1 F8587 G1 X49.857 Y-.143 E.00533 G1 X49.798 Y0 E.00501 G1 X49.857 Y.143 E.00501 G1 X50 Y.202 E.005 G1 X50.143 Y.143 E.005 G1 X50.2 Y.019 E.00441 G1 X50.155 Y-.128 E.005 G1 X50.048 Y-.181 E.00387 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.804 Y-.949 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8587 G1 X49.461 Y-.806 E.01141 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.844 Y-.949 E.01061 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.897 Y.319 ;WIPE_END G1 X48.157 Y-6.804 Z24.8 F30000 G1 X30.752 Y-52.052 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z24.8 F30000 G1 X18.752 Y-10.052 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z24.8 F30000 G1 X-2.945 Y22.045 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z24.8 F30000 G1 X-39.352 Y-10.052 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z24.8 F30000 G1 X-51.352 Y-52.052 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:24.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;24.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25 I-.529 J1.096 P1 F30000 G1 X50.031 Y-1.74 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8577 G3 X49.333 Y-1.61 I-.039 J1.738 E.33867 G3 X49.991 Y-1.739 I.747 J2.079 E.02234 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.037 Y-2.142 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8577 G1 X50.071 Y-2.145 E.00113 G3 X48.211 Y-1.196 I-.078 J2.145 E.37511 G3 X49.581 Y-2.107 I1.778 J1.186 E.05604 G1 X49.997 Y-2.139 E.01386 G1 X50.011 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8577 G1 X50.114 Y-2.578 E.00318 G1 X50.505 Y-2.539 E.01208 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.0156 G1 X49.495 Y-2.539 E.01559 G1 X49.971 Y-2.586 E.0147 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.114 Y-2.578 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.785 Y-1.868 ;WIPE_END G1 X49.805 Y-.949 Z25 F30000 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8577 G1 X49.461 Y-.806 E.01143 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.845 Y-.95 E.01059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.2 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.441045 G1 F8577 G1 X50.155 Y-.128 E.005 G1 X50.019 Y-.2 E.00499 G1 X49.857 Y-.143 E.00555 G1 X49.798 Y0 E.00501 G1 X49.857 Y.143 E.00501 G1 X50 Y.202 E.00501 G1 X50.143 Y.143 E.005 G1 X50.183 Y.056 E.00311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8577 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.372 Y-.456 E.00885 G1 X50.115 Y-.58 E.00876 G1 X49.823 Y-.561 E.00901 G1 X49.582 Y-.418 E.0086 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.61 Y1.285 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8577 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01214 G1 X51.323 Y-.263 E.01213 G1 X51.184 Y-.633 E.01215 G1 X50.954 Y-.954 E.01212 G1 X50.63 Y-1.185 E.01222 G1 X50.263 Y-1.323 E.01205 G1 X49.734 Y-1.322 E.01627 G1 X49.365 Y-1.183 E.01211 G1 X49.046 Y-.954 E.01206 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.574 Y1.268 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.251 Y1.122 G1 X48.962 Y.852 G1 X48.754 Y.516 G1 X48.664 Y.132 G1 X48.677 Y-.263 G1 X48.7 Y-.324 ;WIPE_END G1 X46.198 Y-7.535 Z25 F30000 G1 X30.752 Y-52.052 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8577 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8577 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8577 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z25 F30000 G1 X18.752 Y-10.052 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8577 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8577 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8577 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z25 F30000 G1 X-2.945 Y22.045 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8577 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8577 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z25 F30000 G1 X-39.352 Y-10.052 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8577 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8577 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8577 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z25 F30000 G1 X-51.352 Y-52.052 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8577 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8577 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8577 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:24.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;24.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.2 I-.529 J1.096 P1 F30000 G1 X50.028 Y-1.74 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G3 X49.333 Y-1.61 I-.034 J1.739 E.339 G3 X49.988 Y-1.739 I.753 J2.107 E.02222 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.039 Y-2.143 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X50.068 Y-2.145 E.00097 G3 X48.211 Y-1.196 I-.074 J2.146 E.37526 G3 X49.581 Y-2.107 I1.778 J1.186 E.05604 G1 X49.999 Y-2.14 E.01391 G1 X50.012 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X50.111 Y-2.578 E.00303 G1 X50.505 Y-2.539 E.01218 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.973 Y-2.586 E.01475 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.111 Y-2.578 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.786 Y-1.867 ;WIPE_END G1 X50.39 Y1.285 Z25.2 F30000 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8587 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01214 G1 X51.323 Y-.263 E.01213 G1 X51.184 Y-.633 E.01215 G1 X50.954 Y-.954 E.01212 G1 X50.631 Y-1.185 E.01221 G1 X50.263 Y-1.323 E.01206 G1 X49.734 Y-1.322 E.01626 G1 X49.365 Y-1.183 E.01211 G1 X49.046 Y-.954 E.01207 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.61 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.35 Y1.291 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8587 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.372 Y-.455 E.00884 G1 X50.115 Y-.58 E.00877 G1 X49.823 Y-.561 E.00899 G1 X49.582 Y-.418 E.00862 G1 X49.437 Y-.17 E.00882 G1 X49.42 Y.115 E.00879 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.2 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.441217 G1 F8587 G1 X50.155 Y-.128 E.005 G1 X50.017 Y-.2 E.00505 G1 X49.858 Y-.142 E.00549 G1 X49.799 Y0 E.005 G1 X49.858 Y.142 E.00501 G1 X50 Y.201 E.00501 G1 X50.142 Y.142 E.005 G1 X50.183 Y.056 E.00311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.805 Y-.95 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8587 G1 X49.461 Y-.806 E.01145 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.845 Y-.95 E.01057 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.897 Y.321 ;WIPE_END G1 X48.157 Y-6.803 Z25.2 F30000 G1 X30.752 Y-52.052 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z25.2 F30000 G1 X18.752 Y-10.052 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 M73 P95 R4 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z25.2 F30000 G1 X-2.945 Y22.045 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z25.2 F30000 G1 X-39.352 Y-10.052 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z25.2 F30000 M73 P95 R3 G1 X-51.352 Y-52.052 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8587 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8587 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8587 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:25 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;25 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;25 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.4 I-.529 J1.096 P1 F30000 G1 X50.025 Y-1.74 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G3 X49.333 Y-1.61 I-.031 J1.739 E.33905 G3 X49.985 Y-1.739 I.761 J2.137 E.02211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.04 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X50.065 Y-2.146 E.0008 G3 X48.211 Y-1.196 I-.07 J2.146 E.3754 G3 X49.581 Y-2.107 I1.778 J1.187 E.05604 G1 X50.001 Y-2.141 E.01397 G1 X50.014 Y-2.588 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X50.107 Y-2.578 E.00288 G1 X50.505 Y-2.539 E.01229 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.974 Y-2.586 E.01479 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.107 Y-2.578 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.788 Y-1.866 ;WIPE_END G1 X51.038 Y.851 Z25.4 F30000 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8586 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01214 G1 X51.323 Y-.263 E.01213 G1 X51.184 Y-.633 E.01215 G1 X50.954 Y-.954 E.01212 G1 X50.631 Y-1.185 E.0122 G1 X50.263 Y-1.323 E.01207 G1 X49.734 Y-1.322 E.01625 G1 X49.365 Y-1.183 E.01212 G1 X49.046 Y-.954 E.01208 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.61 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.009 Y.879 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8586 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.372 Y-.455 E.00884 G1 X50.115 Y-.58 E.00877 G1 X49.824 Y-.561 E.00897 G1 X49.582 Y-.418 E.00864 G1 X49.437 Y-.17 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.155 Y-.128 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.441381 G1 F8586 G1 X50.014 Y-.2 E.00512 G1 X49.858 Y-.142 E.00543 G1 X49.799 Y0 E.005 G1 X49.858 Y.142 E.00501 G1 X50 Y.201 E.00501 G1 X50.142 Y.142 E.005 G1 X50.199 Y.019 E.0044 G1 X50.166 Y-.089 E.0037 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.806 Y-.95 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8586 G1 X49.461 Y-.806 E.01147 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.846 Y-.95 E.01055 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.897 Y.321 ;WIPE_END G1 X48.157 Y-6.802 Z25.4 F30000 G1 X30.752 Y-52.052 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X28.026 Y-45.822 Z25.4 F30000 G1 X18.752 Y-10.052 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X18.752 Y-47.948 E1.25707 G1 X19.148 Y-47.948 E.01313 G1 X19.148 Y-10.052 E1.25707 G1 X18.792 Y-10.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.345 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X18.345 Y-48.355 E1.28408 G1 X19.555 Y-48.355 E.04014 G1 X19.555 Y-9.645 E1.28408 G1 X18.385 Y-9.645 E.03881 G1 X17.91 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X17.91 Y-48.79 E1.21618 G1 X19.99 Y-48.79 E.06391 G1 X19.99 Y-9.21 E1.21618 G1 X17.95 Y-9.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.948 Y-11.21 ;WIPE_END G1 X13.888 Y-4.747 Z25.4 F30000 G1 X-2.945 Y22.045 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END G1 X-8.97 Y17.648 Z25.4 F30000 G1 X-39.352 Y-10.052 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X-39.748 Y-10.052 E.01313 G1 X-39.748 Y-47.948 E1.25707 G1 X-39.352 Y-47.948 E.01313 G1 X-39.352 Y-10.092 E1.25575 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.945 Y-9.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X-40.155 Y-9.645 E.04014 G1 X-40.155 Y-48.355 E1.28408 G1 X-38.945 Y-48.355 E.04014 G1 X-38.945 Y-9.685 E1.28275 G1 X-38.51 Y-9.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X-40.59 Y-9.21 E.06391 G1 X-40.59 Y-48.79 E1.21618 G1 X-38.51 Y-48.79 E.06391 G1 X-38.51 Y-9.25 E1.21495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.51 Y-9.212 ;WIPE_END G1 X-42.382 Y-16.611 Z25.4 F30000 G1 X-51.352 Y-52.052 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8586 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8586 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8586 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 ;LAYER_CHANGE ;Z:25.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;25.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.6 I-.529 J1.096 P1 F30000 G1 X50.021 Y-1.741 Z25.6 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2878 G3 X49.333 Y-1.61 I-.026 J1.74 E.33924 G3 X49.981 Y-1.739 I.768 J2.17 E.022 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.042 Y-2.144 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2878 G1 X50.061 Y-2.146 E.00063 G3 X48.211 Y-1.196 I-.067 J2.146 E.37555 G3 X49.581 Y-2.108 I1.779 J1.187 E.05604 G1 X50.002 Y-2.141 E.01403 G1 X50.015 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2878 G1 X50.104 Y-2.579 E.00273 G1 X50.505 Y-2.539 E.01239 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.976 Y-2.587 E.01484 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.104 Y-2.579 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.789 Y-1.865 ;WIPE_END G1 X49.807 Y-.95 Z25.6 F30000 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2878 G1 X49.461 Y-.806 E.01149 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.847 Y-.95 E.01053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.199 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.441543 G1 F2878 G1 X50.155 Y-.128 E.00499 G1 X50.012 Y-.2 E.00518 G1 X49.858 Y-.142 E.00537 G1 X49.799 Y0 E.005 G1 X49.858 Y.142 E.005 G1 X50 Y.201 E.00501 G1 X50.142 Y.142 E.00501 G1 X50.183 Y.056 E.0031 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2878 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.372 Y-.455 E.00883 G1 X50.115 Y-.58 E.00878 G1 X49.825 Y-.561 E.00895 G1 X49.582 Y-.418 E.00866 G1 X49.437 Y-.17 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.61 Y1.285 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2878 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.038 Y.851 E.01214 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01214 G1 X51.323 Y-.263 E.01213 G1 X51.184 Y-.633 E.01215 G1 X50.954 Y-.954 E.01212 G1 X50.631 Y-1.185 E.01219 G1 X50.263 Y-1.323 E.01208 G1 X49.735 Y-1.322 E.01624 G1 X49.366 Y-1.183 E.01212 G1 X49.046 Y-.954 E.01208 G1 X48.816 Y-.632 E.01215 G1 X48.677 Y-.263 E.01212 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.574 Y1.268 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.251 Y1.122 G1 X48.962 Y.852 G1 X48.754 Y.516 G1 X48.664 Y.132 G1 X48.677 Y-.263 G1 X48.7 Y-.324 ;WIPE_END G1 X41.92 Y-3.829 Z25.6 F30000 G1 X-51.352 Y-52.052 Z25.6 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2878 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2878 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2878 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z25.6 F30000 G1 X30.752 Y-52.052 Z25.6 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2878 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2878 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2878 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.885 Y-46.216 Z25.6 F30000 G1 X-2.945 Y22.045 Z25.6 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2878 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2878 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 ;LAYER_CHANGE ;Z:25.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;25.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.8 I.508 J1.106 P1 F30000 G1 X50.018 Y-1.741 Z25.8 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2879 G3 X49.333 Y-1.61 I-.022 J1.74 E.33934 G3 X49.978 Y-1.739 I.777 J2.206 E.02189 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.044 Y-2.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2879 G1 X50.058 Y-2.146 E.00046 G3 X48.211 Y-1.196 I-.063 J2.147 E.3757 G3 X49.581 Y-2.108 I1.779 J1.187 E.05604 G1 X50.004 Y-2.142 E.01409 G1 X50.017 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2879 G1 X50.1 Y-2.579 E.00259 G1 X50.505 Y-2.539 E.01249 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.977 Y-2.587 E.01488 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.1 Y-2.579 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.79 Y-1.864 ;WIPE_END G1 X49.807 Y-.95 Z25.8 F30000 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2879 G1 X49.461 Y-.806 E.01151 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.847 Y-.95 E.01051 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.199 Y.019 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.441706 G1 F2879 G1 X50.155 Y-.127 E.00499 G1 X50.01 Y-.2 E.00525 G1 X49.858 Y-.142 E.00531 G1 X49.799 Y0 E.005 G1 X49.858 Y.142 E.00501 G1 X50 Y.201 E.00501 G1 X50.142 Y.142 E.005 G1 X50.182 Y.056 E.0031 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2879 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.057 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00883 G1 X50.115 Y-.58 E.00878 G1 X49.825 Y-.562 E.00893 G1 X49.582 Y-.418 E.00868 G1 X49.437 Y-.171 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X51.038 Y.851 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2879 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01214 G1 X51.323 Y-.263 E.01213 G1 X51.184 Y-.633 E.01215 G1 X50.954 Y-.954 E.01212 G1 X50.631 Y-1.185 E.01218 G1 X50.263 Y-1.323 E.01209 G1 X49.735 Y-1.322 E.01623 G1 X49.366 Y-1.183 E.01212 G1 X49.046 Y-.954 E.01209 G1 X48.816 Y-.633 E.01214 G1 X48.677 Y-.263 E.01213 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.61 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.009 Y.879 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.749 Y1.122 G1 X50.39 Y1.285 G1 X50 Y1.349 G1 X49.61 Y1.285 G1 X49.251 Y1.122 G1 X49.203 Y1.077 ;WIPE_END G1 X42.455 Y-2.489 Z25.8 F30000 G1 X-51.352 Y-52.052 Z25.8 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2879 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2879 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2879 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z25.8 F30000 G1 X30.752 Y-52.052 Z25.8 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2879 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2879 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2879 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.885 Y-46.216 Z25.8 F30000 G1 X-2.945 Y22.045 Z25.8 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2879 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2879 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 ;LAYER_CHANGE ;Z:25.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;25.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z26 I.508 J1.106 P1 F30000 G1 X50.015 Y-1.741 Z26 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G3 X49.66 Y-1.709 I-.022 J1.738 E.35054 G1 X49.975 Y-1.738 E.01048 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.046 Y-2.146 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X50.054 Y-2.147 E.00029 G3 X48.478 Y-1.522 I-.061 J2.146 E.38962 G3 X49.582 Y-2.101 I1.554 J1.618 E.0419 G1 X50.006 Y-2.142 E.01412 G1 X50.018 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X50.097 Y-2.579 E.00244 G1 X50.505 Y-2.539 E.0126 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.978 Y-2.587 E.01492 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.097 Y-2.579 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.791 Y-1.864 ;WIPE_END G1 X51.038 Y.852 Z26 F30000 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2881 G1 X51.246 Y.516 E.01213 G1 X51.336 Y.131 E.01214 G1 X51.323 Y-.263 E.01213 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.632 Y-1.184 E.01217 G1 X50.263 Y-1.323 E.0121 G1 X49.735 Y-1.322 E.01622 G1 X49.366 Y-1.183 E.01212 G1 X49.046 Y-.954 E.0121 G1 X48.816 Y-.633 E.01214 G1 X48.677 Y-.263 E.01213 G1 X48.664 Y.132 E.01214 G1 X48.754 Y.516 E.01213 G1 X48.962 Y.852 E.01214 G1 X49.251 Y1.122 E.01213 G1 X49.61 Y1.285 E.01214 G1 X50 Y1.349 E.01213 G1 X50.39 Y1.285 E.01214 G1 X50.749 Y1.122 E.01213 G1 X51.009 Y.879 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00882 G1 X50.115 Y-.58 E.00879 G1 X49.826 Y-.562 E.00891 G1 X49.582 Y-.418 E.0087 G1 X49.437 Y-.171 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44187 G1 F2881 G1 X50.008 Y-.2 E.00531 G1 X49.858 Y-.142 E.00525 G1 X49.799 Y0 E.00501 G1 X49.858 Y.142 E.00501 G1 X50 Y.201 E.00501 G1 X50.142 Y.142 E.00501 G1 X50.199 Y.019 E.0044 G1 X50.166 Y-.089 E.00369 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.808 Y-.95 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2881 G1 X49.461 Y-.806 E.01153 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.848 Y-.951 E.01049 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.896 Y.323 ;WIPE_END G1 X44.103 Y-3.157 Z26 F30000 G1 X-51.352 Y-52.052 Z26 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z26 F30000 G1 X30.752 Y-52.052 Z26 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.885 Y-46.216 Z26 F30000 G1 X-2.945 Y22.045 Z26 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 ;LAYER_CHANGE ;Z:25.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;25.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z26.2 I.509 J1.106 P1 F30000 G1 X50 Y-1.742 Z26.2 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.047 Y-2.147 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X50.051 Y-2.147 E.00012 G3 X48.478 Y-1.522 I-.057 J2.146 E.38978 G3 X49.582 Y-2.101 I1.555 J1.621 E.0419 G1 X50.008 Y-2.143 E.01418 G1 X50.019 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X50.094 Y-2.58 E.00231 G1 X50.505 Y-2.539 E.0127 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.979 Y-2.587 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.094 Y-2.58 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.791 Y-1.863 ;WIPE_END G1 X49.461 Y-.806 Z26.2 F30000 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2881 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.498 Y-.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2881 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442575 G1 F2881 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2881 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X42.098 Y-2.865 Z26.2 F30000 G1 X-51.352 Y-52.052 Z26.2 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z26.2 F30000 G1 X30.752 Y-52.052 Z26.2 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.885 Y-46.216 Z26.2 F30000 G1 X-2.945 Y22.045 Z26.2 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 ;LAYER_CHANGE ;Z:26 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;26 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;26 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z26.4 I.509 J1.106 P1 F30000 G1 X50 Y-1.742 Z26.4 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2880 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.048 Y-2.147 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2880 G3 X48.478 Y-1.522 I-.054 J2.147 E.38995 G3 X50.008 Y-2.147 I1.556 J1.623 E.05613 G1 X50.02 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2880 G1 X50.09 Y-2.58 E.00218 G1 X50.505 Y-2.539 E.01281 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.98 Y-2.587 E.01498 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.09 Y-2.58 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.792 Y-1.862 ;WIPE_END G1 X49.873 Y-.154 Z26.4 F30000 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442579 G1 F2880 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.912 Y-.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2880 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2880 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2880 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.715 Y-.39 G1 X48.878 Y-.749 G1 X48.923 Y-.797 ;WIPE_END G1 X42.127 Y-4.271 Z26.4 F30000 G1 X-51.352 Y-52.052 Z26.4 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2880 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2880 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2880 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z26.4 F30000 G1 X30.752 Y-52.052 Z26.4 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2880 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 M73 P96 R3 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2880 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2880 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.885 Y-46.216 Z26.4 F30000 G1 X-2.945 Y22.045 Z26.4 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2880 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2880 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 ;LAYER_CHANGE ;Z:26.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;26.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z26.6 I.509 J1.106 P1 F30000 G1 X50 Y-1.742 Z26.6 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.044 Y-2.148 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G3 X48.478 Y-1.522 I-.05 J2.148 E.39023 G3 X50.004 Y-2.147 I1.558 J1.625 E.05602 G1 X50.021 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X50.087 Y-2.58 E.00205 G1 X50.505 Y-2.539 E.01291 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.981 Y-2.587 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.087 Y-2.58 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.793 Y-1.862 ;WIPE_END G1 X50.127 Y.154 Z26.6 F30000 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.44258 G1 F2881 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2881 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.778 Y.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2881 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END G1 X42.098 Y-2.865 Z26.6 F30000 G1 X-51.352 Y-52.052 Z26.6 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z26.6 F30000 G1 X30.752 Y-52.052 Z26.6 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2881 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.885 Y-46.216 Z26.6 F30000 G1 X-2.945 Y22.045 Z26.6 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2881 G1 X-2.945 Y22.355 E.01028 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y22.045 E.01028 G1 X-2.985 Y22.045 E.48663 G1 X-2.51 Y21.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2881 G1 X-2.51 Y22.79 E.03626 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y21.61 E.03626 G1 X-2.55 Y21.61 E.4775 ;LAYER_CHANGE ;Z:26.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;26.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-2.51 Y22.79 G1 X-3.329 Y22.79 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z26.8 I.509 J1.106 P1 F30000 G1 X50 Y-1.743 Z26.8 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.041 Y-2.148 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X48.478 Y-1.522 I-.046 J2.147 E.39028 G3 X50.001 Y-2.148 I1.559 J1.628 E.0559 G1 X50.021 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X50.084 Y-2.581 E.00193 G1 X50.505 Y-2.539 E.01301 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.981 Y-2.587 E.01502 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.084 Y-2.581 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.793 Y-1.861 ;WIPE_END G1 X49.868 Y1.336 Z26.8 F30000 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01213 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F15000 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.222 Y-.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.461 Y-.806 G1 X49.811 Y-.951 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.863 Y-.402 ;WIPE_END G1 X44.051 Y-3.845 Z26.8 F30000 G1 X-51.352 Y-52.052 Z26.8 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z26.8 F30000 G1 X30.752 Y-52.052 Z26.8 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.85 Y-46.232 Z26.8 F30000 G1 X-3.352 Y21.948 Z26.8 G1 Z26.4 M73 P96 R2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-17.248 Y21.948 E.46096 G1 F2400 G1 X-17.248 Y21.4 E.01818 G1 F600 G1 X-17.248 Y21.2 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-17.248 Y20.452 E.02481 G1 X-15.4 Y20.452 E.0613 G1 X-5.2 Y20.452 E.33835 G1 X-3.352 Y20.452 E.0613 G1 X-3.352 Y21.2 E.02481 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-3.352 Y21.4 E.00663 M106 S255 G1 F2400 G1 X-3.352 Y21.908 E.01685 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-17.655 Y22.355 E.48796 G1 F2400 G1 X-17.655 Y21.4 E.03168 G1 F600 G1 X-17.655 Y21.2 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X-17.655 Y20.045 E.03831 G1 X-15.4 Y20.045 E.0748 G1 X-5.2 Y20.045 E.33835 G1 X-2.945 Y20.045 E.0748 G1 X-2.945 Y21.2 E.03831 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X-2.945 Y21.4 E.00663 M106 S255 G1 F2400 G1 X-2.945 Y22.315 E.03035 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-18.09 Y22.79 E.47873 G1 F2400 G1 X-18.09 Y21.4 E.04271 G1 F600 G1 X-18.09 Y21.2 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X-18.09 Y19.61 E.05274 G1 X-15.4 Y19.61 E.08923 G1 X-5.2 Y19.61 E.33835 G1 X-2.51 Y19.61 E.08923 G1 X-2.51 Y21.2 E.05274 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X-2.51 Y21.4 E.00615 M106 S255 G1 F2400 G1 X-2.51 Y22.75 E.04148 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F2400 G1 X-4.51 Y22.755 ;WIPE_END G17 G3 Z26.8 I1.035 J.641 P1 F30000 G1 X-3.378 Y20.928 Z26.8 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F600 G1 X-4.69 Y20.928 E.04031 G1 X-15.74 Y20.928 E.33954 G1 X-17.052 Y20.928 E.04031 G1 X-17.052 Y21.305 E.01158 G1 F1320 G1 X-3.548 Y21.305 E.41494 G1 X-3.548 Y21.682 E.01158 G1 F1500 G1 X-17.222 Y21.682 E.42016 ;LAYER_CHANGE ;Z:26.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;26.6 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X-15.222 Y21.682 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27 I.411 J1.145 P1 F30000 G1 X50 Y-1.742 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3876 M106 S255 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.038 Y-2.148 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3876 G3 X48.804 Y-1.789 I-.044 J2.146 E.40415 G3 X49.998 Y-2.149 I1.183 J1.765 E.04196 G1 X50.022 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3876 G1 X50.08 Y-2.581 E.00181 G1 X50.505 Y-2.539 E.01312 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.982 Y-2.587 E.01503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.08 Y-2.581 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.793 Y-1.861 ;WIPE_END G1 X49.148 Y1.038 Z27 F30000 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3876 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3876 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3876 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F3876 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.834 Y.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.801 Y-.02 G1 X49.873 Y-.154 G1 X50.02 Y-.199 G1 X50.154 Y-.127 G1 X50.199 Y.02 G1 X50.127 Y.154 G1 X49.98 Y.199 G1 X49.846 Y.127 ;WIPE_END G1 X43.062 Y-3.371 Z27 F30000 G1 X-51.352 Y-52.052 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3876 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3876 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3876 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z27 F30000 G1 X30.752 Y-52.052 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3876 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3876 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3876 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.85 Y-46.232 Z27 F30000 G1 X-3.352 Y21.948 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3876 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3876 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3876 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-12.053 Y21.588 Z27 F30000 G1 X-16.856 Y20.844 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3876 G1 X-16.856 Y21.556 E.02187 G1 X-3.744 Y21.556 E.40288 G1 X-3.744 Y20.844 E.02187 G1 X-16.816 Y20.844 E.40166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.5 Y21.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377524 G1 F3876 G1 X-4.14 Y21.2 E.33701 ;LAYER_CHANGE ;Z:26.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;26.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-6.14 Y21.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27.2 I.46 J1.127 P1 F30000 G1 X50 Y-1.742 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3880 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.034 Y-2.149 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3880 G3 X48.804 Y-1.789 I-.04 J2.147 E.40435 G3 X49.994 Y-2.149 I1.184 J1.767 E.04185 G1 X50.022 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3880 G1 X50.077 Y-2.581 E.00171 G1 X50.505 Y-2.539 E.01322 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.982 Y-2.587 E.01503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.077 Y-2.581 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.794 Y-1.861 ;WIPE_END G1 X50.539 Y.806 Z27.2 F30000 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3880 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F3880 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3880 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3880 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X44.165 Y-4.313 Z27.2 F30000 G1 X-51.352 Y-52.052 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3880 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3880 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3880 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z27.2 F30000 G1 X30.752 Y-52.052 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3880 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3880 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3880 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.85 Y-46.232 Z27.2 F30000 G1 X-3.352 Y21.948 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3880 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3880 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3880 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-12.053 Y21.588 Z27.2 F30000 G1 X-16.856 Y20.844 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3880 G1 X-16.856 Y21.556 E.02187 G1 X-3.744 Y21.556 E.40288 G1 X-3.744 Y20.844 E.02187 G1 X-16.816 Y20.844 E.40166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.5 Y21.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377524 G1 F3880 G1 X-4.14 Y21.2 E.33701 ;LAYER_CHANGE ;Z:27 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;27 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-6.14 Y21.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;27 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27.4 I.46 J1.127 P1 F30000 G1 X50 Y-1.742 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3882 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.031 Y-2.149 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3882 G3 X48.804 Y-1.789 I-.036 J2.148 E.40467 G3 X49.991 Y-2.149 I1.185 J1.769 E.04174 G1 X50.022 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3882 G1 X50.074 Y-2.582 E.0016 G1 X50.505 Y-2.539 E.01332 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.982 Y-2.587 E.01503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.074 Y-2.582 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.793 Y-1.861 ;WIPE_END G1 X49.868 Y1.336 Z27.4 F30000 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3882 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01213 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.829 Y1.327 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F3882 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.829 Y-.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3882 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3882 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.222 Y-.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.461 Y-.806 G1 X49.811 Y-.951 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.863 Y-.402 ;WIPE_END G1 X44.051 Y-3.845 Z27.4 F30000 G1 X-51.352 Y-52.052 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3882 G1 X-51.748 Y-52.052 E.01313 G1 X-51.748 Y-59.948 E.26192 G1 X-51.352 Y-59.948 E.01313 G1 X-51.352 Y-52.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.945 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3882 G1 X-52.155 Y-51.645 E.04014 G1 X-52.155 Y-60.355 E.28893 G1 X-50.945 Y-60.355 E.04014 G1 X-50.945 Y-51.685 E.2876 G1 X-50.51 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3882 G1 X-52.59 Y-51.21 E.06391 G1 X-52.59 Y-60.79 E.29437 G1 X-50.51 Y-60.79 E.06391 G1 X-50.51 Y-51.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-52.51 Y-51.212 ;WIPE_END G1 X-44.878 Y-51.289 Z27.4 F30000 G1 X30.752 Y-52.052 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3882 G1 X30.752 Y-59.948 E.26192 G1 X31.148 Y-59.948 E.01313 G1 X31.148 Y-52.052 E.26192 G1 X30.792 Y-52.052 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.345 Y-51.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3882 G1 X30.345 Y-60.355 E.28893 G1 X31.555 Y-60.355 E.04014 G1 X31.555 Y-51.645 E.28893 G1 X30.385 Y-51.645 E.03881 G1 X29.91 Y-51.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3882 G1 X29.91 Y-60.79 E.29437 G1 X31.99 Y-60.79 E.06391 G1 X31.99 Y-51.21 E.29437 G1 X29.95 Y-51.21 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X29.942 Y-53.21 ;WIPE_END G1 X26.85 Y-46.232 Z27.4 F30000 G1 X-3.352 Y21.948 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3882 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3882 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3882 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-12.053 Y21.588 Z27.4 F30000 G1 X-16.856 Y20.844 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3882 G1 X-16.856 Y21.556 E.02187 G1 X-3.744 Y21.556 E.40288 G1 X-3.744 Y20.844 E.02187 G1 X-16.816 Y20.844 E.40166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.5 Y21.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377524 G1 F3882 G1 X-4.14 Y21.2 E.33701 ;LAYER_CHANGE ;Z:27.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;27.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-6.14 Y21.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27.6 I.46 J1.127 P1 F30000 G1 X50 Y-1.742 Z27.6 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2187 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 M73 P97 R2 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.028 Y-2.149 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2187 G3 X48.804 Y-1.789 I-.033 J2.146 E.40438 G3 X49.988 Y-2.149 I1.186 J1.771 E.04163 G1 X50.021 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2187 G1 X50.07 Y-2.582 E.00151 G1 X50.505 Y-2.539 E.01343 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.982 Y-2.587 E.01503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.07 Y-2.582 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.793 Y-1.861 ;WIPE_END G1 X49.148 Y1.038 Z27.6 F30000 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2187 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01213 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2187 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F2187 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2187 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.00881 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.506 Y.291 ;WIPE_END G1 X42.443 Y3.185 Z27.6 F30000 G1 X-3.352 Y21.948 Z27.6 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2187 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2187 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2187 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-12.053 Y21.588 Z27.6 F30000 G1 X-16.856 Y20.844 Z27.6 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2187 G1 X-16.856 Y21.556 E.02187 G1 X-3.744 Y21.556 E.40288 G1 X-3.744 Y20.844 E.02187 G1 X-16.816 Y20.844 E.40166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.5 Y21.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377524 G1 F2187 G1 X-4.14 Y21.2 E.33701 ;LAYER_CHANGE ;Z:27.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;27.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-6.14 Y21.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27.8 I.46 J1.127 P1 F30000 G1 X50 Y-1.743 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2188 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.024 Y-2.149 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2188 G3 X48.804 Y-1.789 I-.029 J2.146 E.4045 G3 X49.984 Y-2.15 I1.187 J1.773 E.04152 G1 X50.025 Y-2.579 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2188 G1 X50.067 Y-2.582 E.0013 G1 X50.505 Y-2.539 E.01353 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.985 Y-2.576 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.067 Y-2.582 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.796 Y-1.859 ;WIPE_END G1 X50.633 Y-1.184 Z27.8 F30000 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2188 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2188 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F2188 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2188 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.373 Y-.455 G1 X50.546 Y-.226 G1 X50.551 Y-.192 ;WIPE_END G1 X43.491 Y2.708 Z27.8 F30000 G1 X-3.352 Y21.948 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2188 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2188 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2188 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-12.053 Y21.588 Z27.8 F30000 G1 X-16.856 Y20.844 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2188 G1 X-16.856 Y21.556 E.02187 G1 X-3.744 Y21.556 E.40288 G1 X-3.744 Y20.844 E.02187 G1 X-16.816 Y20.844 E.40166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.5 Y21.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377524 G1 F2188 G1 X-4.14 Y21.2 E.33701 ;LAYER_CHANGE ;Z:27.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;27.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-6.14 Y21.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z28 I.46 J1.127 P1 F30000 G1 X50 Y-1.742 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2188 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.021 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2188 G3 X49.177 Y-1.988 I-.026 J2.147 E.41879 G3 X49.981 Y-2.15 I.81 J1.944 E.0274 G1 X50.026 Y-2.58 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2188 G1 X50.063 Y-2.583 E.00116 G1 X50.505 Y-2.539 E.01364 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.986 Y-2.577 E.01513 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.063 Y-2.583 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.797 Y-1.859 ;WIPE_END G1 X50.058 Y.585 Z28 F30000 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2188 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F2188 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2188 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.222 Y-.567 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y-1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2188 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.484 Y-1.246 G1 X49.868 Y-1.336 G1 X50.263 Y-1.323 G1 X50.633 Y-1.184 G1 X50.954 Y-.954 G1 X50.992 Y-.901 ;WIPE_END G1 X43.956 Y2.058 Z28 F30000 G1 X-3.352 Y21.948 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2188 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2188 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2188 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-12.053 Y21.588 Z28 F30000 G1 X-16.856 Y20.844 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2188 G1 X-16.856 Y21.556 E.02187 G1 X-3.744 Y21.556 E.40288 G1 X-3.744 Y20.844 E.02187 G1 X-16.816 Y20.844 E.40166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.5 Y21.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377524 G1 F2188 G1 X-4.14 Y21.2 E.33701 ;LAYER_CHANGE ;Z:27.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;27.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-6.14 Y21.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z28.2 I.46 J1.127 P1 F30000 G1 X50 Y-1.743 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2189 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.017 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2189 G3 X49.177 Y-1.988 I-.022 J2.148 E.41917 G3 X49.978 Y-2.15 I.812 J1.95 E.02729 G1 X50.027 Y-2.58 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2189 G1 X50.06 Y-2.583 E.00103 G1 X50.505 Y-2.539 E.01374 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.987 Y-2.577 E.01516 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.06 Y-2.583 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.797 Y-1.858 ;WIPE_END G1 X48.962 Y-.852 Z28.2 F30000 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2189 G1 X48.754 Y-.516 E.01214 G1 X48.664 Y-.132 E.01214 G1 X48.677 Y.263 E.01213 G1 X48.816 Y.633 E.01214 G1 X49.046 Y.954 E.01213 G1 X49.367 Y1.184 E.01214 G1 X49.737 Y1.323 E.01214 G1 X50.132 Y1.336 E.01214 G1 X50.516 Y1.246 E.01214 G1 X50.852 Y1.038 E.01214 G1 X51.122 Y.749 E.01214 G1 X51.285 Y.39 E.01214 G1 X51.349 Y0 E.01214 G1 X51.246 Y-.516 E.01617 G1 X51.038 Y-.852 E.01214 G1 X50.749 Y-1.122 E.01214 G1 X50.39 Y-1.285 E.01214 G1 X50 Y-1.349 E.01214 G1 X49.61 Y-1.285 E.01214 G1 X49.251 Y-1.122 E.01214 G1 X48.992 Y-.879 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F2189 G1 X50.154 Y.127 E.00498 G1 X50.199 Y-.02 E.00498 G1 X50.127 Y-.154 E.00498 G1 X49.98 Y-.199 E.00498 G1 X49.846 Y-.127 E.00498 G1 X49.801 Y.02 E.00498 G1 X49.873 Y.154 E.00498 G1 X49.981 Y.187 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.171 Y.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2189 G1 X50.418 Y.418 E.0088 G1 X50.563 Y.171 E.0088 G1 X50.585 Y-.058 E.00705 G1 X50.491 Y-.328 E.0088 G1 X50.277 Y-.519 E.0088 G1 X50 Y-.591 E.0088 G1 X49.723 Y-.519 E.0088 G1 X49.509 Y-.328 E.0088 G1 X49.415 Y-.058 E.0088 G1 X49.454 Y.226 E.0088 G1 X49.627 Y.455 E.00881 G1 X49.885 Y.58 E.0088 G1 X50.131 Y.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.629 Y.896 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2189 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G1 X50.97 Y0 E.01163 G1 X50.896 Y-.371 E.01163 G1 X50.686 Y-.686 E.01163 G1 X50.371 Y-.896 E.01163 G1 X50 Y-.97 E.01163 G1 X49.629 Y-.896 E.01163 G1 X49.314 Y-.686 E.01163 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.596 Y.874 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.314 Y.686 G1 X49.104 Y.371 G1 X49.03 Y0 G1 X49.104 Y-.371 G1 X49.314 Y-.686 G1 X49.437 Y-.768 ;WIPE_END G1 X42.426 Y2.249 Z28.2 F30000 G1 X-3.352 Y21.948 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2189 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2189 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2189 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-12.053 Y21.588 Z28.2 F30000 G1 X-16.856 Y20.844 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2189 G1 X-16.856 Y21.556 E.02187 G1 X-3.744 Y21.556 E.40288 M73 P97 R1 G1 X-3.744 Y20.844 E.02187 G1 X-16.816 Y20.844 E.40166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.5 Y21.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377524 G1 F2189 G1 X-4.14 Y21.2 E.33701 ;LAYER_CHANGE ;Z:28 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;28 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-6.14 Y21.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;28 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z28.4 I.46 J1.127 P1 F30000 G1 X50 Y-1.742 Z28.4 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2246 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.014 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2246 G3 X49.177 Y-1.988 I-.018 J2.148 E.41931 G3 X49.974 Y-2.151 I.814 J1.957 E.02717 G1 X50.027 Y-2.581 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2246 G1 X50.057 Y-2.583 E.0009 G1 X50.505 Y-2.539 E.01384 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.988 Y-2.578 E.01519 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.057 Y-2.583 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.798 Y-1.858 ;WIPE_END G1 X49.148 Y-1.038 Z28.4 F30000 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2246 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.873 Y-.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F2246 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.912 Y-.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2246 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2246 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END G1 X43.297 Y3.65 Z28.4 F30000 G1 X-3.352 Y21.948 Z28.4 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2246 G1 X-17.248 Y21.948 E.46095 G1 X-17.248 Y20.452 E.04962 G1 X-3.352 Y20.452 E.46095 G1 X-3.352 Y21.908 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-2.945 Y22.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2246 G1 X-17.655 Y22.355 E.48796 G1 X-17.655 Y20.045 E.07663 G1 X-2.945 Y20.045 E.48796 G1 X-2.945 Y22.315 E.0753 G1 X-2.51 Y22.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2246 G1 X-18.09 Y22.79 E.47873 G1 X-18.09 Y19.61 E.09771 G1 X-2.51 Y19.61 E.47873 G1 X-2.51 Y22.75 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-4.51 Y22.755 ;WIPE_END G1 X-4.241 Y21.824 Z28.4 F30000 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.420959 G1 F2246 G1 X-3.476 Y21.059 E.0333 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-3.528 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-4.775 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.31 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-4.063 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-4.598 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-5.845 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.379 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-5.132 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-5.667 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-6.914 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.449 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-6.201 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.736 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-7.983 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8.518 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-7.271 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.805 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-9.052 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.587 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-8.34 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-8.875 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-10.122 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-10.656 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-9.409 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-9.944 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-11.191 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-11.726 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-10.478 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-11.013 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-12.26 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.795 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-11.548 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-12.082 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-13.329 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-13.864 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-12.617 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-13.152 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-14.399 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.933 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-13.686 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.221 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-15.468 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.003 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-14.755 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.29 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-16.537 Y21.824 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.072 Y21.824 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-15.825 Y20.576 E.05433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.359 Y20.576 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F2246 G1 X-17.124 Y21.341 E.03329 ;LAYER_CHANGE ;Z:28.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;28.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.359 Y20.576 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z28.6 I.388 J1.153 P1 F30000 G1 X50 Y-1.742 Z28.6 G1 Z28.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.151 I-.419 J2.105 E.43209 G1 X50.028 Y-2.582 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.053 Y-2.584 E.00078 G1 X50.505 Y-2.539 E.01395 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.988 Y-2.579 E.01521 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.053 Y-2.584 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.798 Y-1.857 ;WIPE_END G1 X50.154 Y-.127 Z28.6 F30000 G1 Z28.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442577 G1 F1200 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.00881 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.00881 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01213 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 ;LAYER_CHANGE ;Z:28.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;28.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.715 Y-.39 G1 X48.878 Y-.749 G1 X48.923 Y-.797 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z28.8 I.803 J.914 P1 F30000 G1 X50 Y-1.743 Z28.8 G1 Z28.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.151 I-.419 J2.105 E.43209 G1 X50.029 Y-2.582 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.05 Y-2.584 E.00065 G1 X50.505 Y-2.539 E.01405 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.0156 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.0156 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.989 Y-2.579 E.01523 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.05 Y-2.584 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.799 Y-1.857 ;WIPE_END G1 X50.132 Y1.336 Z28.8 F30000 G1 Z28.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X50.516 Y1.246 E.01214 G1 X50.852 Y1.038 E.01214 G1 X51.122 Y.749 E.01214 G1 X51.285 Y.39 E.01214 G1 X51.349 Y0 E.01214 G1 X51.246 Y-.516 E.01617 G1 X51.038 Y-.852 E.01213 G1 X50.749 Y-1.122 E.01214 G1 X50.39 Y-1.285 E.01214 G1 X50 Y-1.349 E.01214 G1 X49.61 Y-1.285 E.01214 G1 X49.251 Y-1.122 E.01214 G1 X48.962 Y-.852 E.01214 G1 X48.754 Y-.516 E.01214 G1 X48.664 Y-.132 E.01214 G1 X48.677 Y.263 E.01213 G1 X48.816 Y.633 E.01214 G1 X49.046 Y.954 E.01213 G1 X49.367 Y1.184 E.01214 G1 X49.737 Y1.323 E.01214 G1 X50.092 Y1.335 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.873 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442576 G1 F1200 G1 X50.02 Y.199 E.00498 G1 X50.154 Y.127 E.00498 G1 X50.199 Y-.02 E.00498 G1 X50.127 Y-.154 E.00498 G1 X49.98 Y-.199 E.00498 G1 X49.846 Y-.127 E.00498 G1 X49.801 Y.02 E.00498 G1 X49.854 Y.119 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.723 Y-.519 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X49.509 Y-.328 E.0088 G1 X49.415 Y-.058 E.00881 G1 X49.454 Y.226 E.0088 G1 X49.627 Y.455 E.00881 G1 X49.885 Y.58 E.0088 G1 X50.171 Y.563 E.0088 G1 X50.418 Y.418 E.0088 G1 X50.563 Y.171 E.0088 G1 X50.585 Y-.058 E.00705 G1 X50.491 Y-.328 E.0088 G1 X50.277 Y-.519 E.00881 G1 X50 Y-.591 E.0088 G1 X49.761 Y-.529 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-.97 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.629 Y-.896 E.01163 G1 X49.314 Y-.686 E.01163 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G1 X50.97 Y0 E.01163 G1 X50.896 Y-.371 E.01163 G1 X50.686 Y-.686 E.01163 G1 X50.371 Y-.896 E.01163 G1 X50.039 Y-.962 E.0104 ;LAYER_CHANGE ;Z:28.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;28.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.371 Y-.896 G1 X50.686 Y-.686 G1 X50.896 Y-.371 G1 X50.97 Y0 G1 X50.896 Y.371 G1 X50.814 Y.494 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z29 I1.144 J-.416 P1 F30000 G1 X50 Y-1.742 Z29 G1 Z28.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.42 Y-2.111 I.008 J2.15 E.01401 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.15 I-.815 J-1.989 E.25017 G1 X50.029 Y-2.583 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.047 Y-2.584 E.00054 G1 X50.505 Y-2.539 E.01415 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.989 Y-2.58 E.01524 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.047 Y-2.584 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.799 Y-1.857 ;WIPE_END G1 X50.127 Y.154 Z29 F30000 G1 Z28.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.44258 G1 F1200 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.088 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01213 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 ;LAYER_CHANGE ;Z:28.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;28.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z29.2 I1.1 J.52 P1 F30000 G1 X50 Y-1.742 Z29.2 G1 Z28.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.42 Y-2.111 I.008 J2.15 E.01401 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.15 I-.815 J-1.989 E.25017 G1 X50.03 Y-2.584 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.043 Y-2.585 E.00042 G1 X50.505 Y-2.539 E.01426 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.01559 G1 X47.461 Y.505 E.0156 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.99 Y-2.58 E.01525 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.043 Y-2.585 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.799 Y-1.856 ;WIPE_END G1 X50.633 Y1.184 Z29.2 F30000 G1 Z28.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 M73 P98 R1 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.00881 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F1200 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.498 Y-.822 E.0104 ;LAYER_CHANGE ;Z:29 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;29 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.811 Y-.951 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y-.042 ;WIPE_END ;AFTER_LAYER_CHANGE ;29 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z29.4 I1.062 J-.594 P1 F30000 G1 X50 Y-1.743 Z29.4 G1 Z29 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.03 Y-2.584 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.04 Y-2.585 E.00032 G1 X50.505 Y-2.539 E.01436 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.99 Y-2.581 E.01526 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.04 Y-2.585 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.799 Y-1.856 ;WIPE_END G1 X50.633 Y-1.184 Z29.4 F30000 G1 Z29 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.665 Y-1.161 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.585 Y.058 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.574 Y.096 E.00582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.199 Y.02 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F1200 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.18 Y.055 E.00368 ;LAYER_CHANGE ;Z:29.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;29.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.127 Y.154 G1 X49.98 Y.199 G1 X49.846 Y.127 G1 X49.801 Y-.02 G1 X49.873 Y-.154 G1 X50.02 Y-.199 G1 X50.154 Y-.127 G1 X50.199 Y.02 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z29.6 I1.209 J-.136 P1 F30000 G1 X50 Y-1.743 Z29.6 G1 Z29.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.029 Y-2.585 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.037 Y-2.585 E.00022 G1 X50.505 Y-2.539 E.01447 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.99 Y-2.581 E.01525 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.037 Y-2.585 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.799 Y-1.856 ;WIPE_END G1 X49.829 Y-.563 Z29.6 F30000 G1 Z29.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.869 Y-.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F1200 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.148 Y1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 ;LAYER_CHANGE ;Z:29.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;29.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.878 Y.749 G1 X48.715 Y.39 G1 X48.651 Y0 G1 X48.715 Y-.39 G1 X48.878 Y-.749 G1 X48.923 Y-.797 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z29.8 I.803 J.914 P1 F30000 G1 X50 Y-1.743 Z29.8 G1 Z29.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.029 Y-2.585 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.033 Y-2.586 E.00013 G1 X50.505 Y-2.539 E.01457 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.0156 G1 X49.495 Y-2.539 E.0156 G1 X49.989 Y-2.582 E.01524 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.033 Y-2.586 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.799 Y-1.857 ;WIPE_END G1 X50.02 Y-.199 Z29.8 F30000 G1 Z29.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.44258 G1 F1200 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.328 Y.491 E.00881 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.0088 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.00881 G1 X50.018 Y.58 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01214 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 ;LAYER_CHANGE ;Z:29.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;29.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30 I1.1 J.52 P1 F30000 G1 X50 Y-1.742 Z30 G1 Z29.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.42 Y-2.111 I.008 J2.15 E.01401 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.15 I-.815 J-1.989 E.25017 G1 X50.028 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.03 Y-2.586 E.00005 G1 X50.505 Y-2.539 E.01467 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.988 Y-2.582 E.01522 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.03 Y-2.586 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.798 Y-1.857 ;WIPE_END G1 X50.633 Y1.184 Z30 F30000 G1 Z29.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.595 Y1.198 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.98 Y.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F1200 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.945 Y.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.545 Y.373 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.528 Y.337 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.194 Y.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.178 Y.502 E.0104 ;LAYER_CHANGE ;Z:29.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;29.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.049 Y.189 G1 X49.049 Y-.189 G1 X49.194 Y-.539 G1 X49.461 Y-.806 G1 X49.811 Y-.951 G1 X49.958 Y-.951 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.2 I1.215 J.064 P1 F30000 G1 X50 Y-1.742 Z30.2 G1 Z29.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.42 Y-2.111 I.008 J2.15 E.01401 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.15 I-.815 J-1.989 E.25017 G1 X50.026 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01478 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.987 Y-2.583 E.01517 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.798 Y-1.858 ;WIPE_END G1 X50.199 Y.02 Z30.2 F30000 G1 Z29.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.44258 G1 F1200 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.18 Y.055 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.585 Y.058 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.574 Y.096 E.00582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X51.184 Y-.633 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.198 Y-.595 E.01091 ;LAYER_CHANGE ;Z:30 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;30 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X51.323 Y-.263 G1 X51.323 Y.263 G1 X51.184 Y.633 G1 X50.954 Y.954 G1 X50.686 Y1.145 ;WIPE_END ;AFTER_LAYER_CHANGE ;30 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.4 I1.184 J-.281 P1 F30000 G1 X50 Y-1.743 Z30.4 G1 Z30 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.023 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01488 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.0156 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.0156 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.0156 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.983 Y-2.583 E.01507 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.795 Y-1.86 ;WIPE_END G1 X50.127 Y-.154 Z30.4 F30000 G1 Z30 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442579 G1 F1200 G1 X49.98 Y-.199 E.00498 G1 X49.846 Y-.127 E.00498 G1 X49.801 Y.02 E.00498 G1 X49.873 Y.154 E.00498 G1 X50.02 Y.199 E.00498 G1 X50.154 Y.127 E.00498 G1 X50.199 Y-.02 E.00498 G1 X50.146 Y-.119 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.277 Y-.519 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50 Y-.591 E.0088 G1 X49.723 Y-.519 E.0088 G1 X49.509 Y-.328 E.0088 G1 X49.415 Y-.058 E.00881 G1 X49.454 Y.226 E.0088 G1 X49.627 Y.455 E.0088 G1 X49.885 Y.58 E.0088 G1 X50.171 Y.563 E.0088 G1 X50.418 Y.418 E.0088 G1 X50.563 Y.171 E.0088 G1 X50.585 Y-.058 E.00705 G1 X50.491 Y-.328 E.0088 G1 X50.307 Y-.492 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.371 Y-.896 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50 Y-.97 E.01163 G1 X49.629 Y-.896 E.01163 G1 X49.314 Y-.686 E.01163 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G1 X50.97 Y0 E.01163 G1 X50.896 Y-.371 E.01163 G1 X50.686 Y-.686 E.01163 G1 X50.404 Y-.874 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.39 Y-1.285 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50 Y-1.349 E.01214 G1 X49.61 Y-1.285 E.01214 G1 X49.251 Y-1.122 E.01213 G1 X48.962 Y-.852 E.01214 G1 X48.754 Y-.516 E.01214 G1 X48.664 Y-.132 E.01214 G1 X48.677 Y.263 E.01213 G1 X48.816 Y.633 E.01214 G1 X49.046 Y.954 E.01214 G1 X49.367 Y1.184 E.01214 G1 X49.737 Y1.323 E.01214 G1 X50.132 Y1.336 E.01213 G1 X50.516 Y1.246 E.01214 G1 X50.852 Y1.038 E.01214 G1 X51.122 Y.749 E.01214 G1 X51.285 Y.39 E.01214 G1 X51.349 Y0 E.01214 G1 X51.246 Y-.516 E.01617 G1 X51.038 Y-.852 E.01214 G1 X50.749 Y-1.122 E.01214 G1 X50.426 Y-1.268 E.01091 ;LAYER_CHANGE ;Z:30.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;30.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.749 Y-1.122 G1 X51.038 Y-.852 G1 X51.246 Y-.516 G1 X51.349 Y0 G1 X51.295 Y.325 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.6 I1.031 J-.646 P1 F30000 G1 X50 Y-1.743 Z30.6 G1 Z30.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.151 I-.419 J2.105 E.43209 G1 X50.02 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01498 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.0156 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.0156 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.98 Y-2.583 E.01496 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.792 Y-1.862 ;WIPE_END G1 X49.723 Y-.519 Z30.6 F30000 G1 Z30.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X49.509 Y-.328 E.0088 G1 X49.415 Y-.058 E.0088 G1 X49.454 Y.226 E.0088 G1 X49.627 Y.455 E.00881 G1 X49.885 Y.58 E.0088 G1 X50.171 Y.563 E.0088 G1 X50.418 Y.418 E.0088 G1 X50.563 Y.171 E.0088 G1 X50.585 Y-.058 E.00705 G1 X50.491 Y-.328 E.0088 G1 X50.277 Y-.519 E.00881 G1 X50 Y-.591 E.0088 G1 X49.761 Y-.529 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F1200 G1 X50.199 Y-.02 E.00498 G1 X50.127 Y-.154 E.00498 G1 X49.98 Y-.199 E.00498 G1 X49.846 Y-.127 E.00498 G1 X49.801 Y.02 E.00498 G1 X49.873 Y.154 E.00498 G1 X50.02 Y.199 E.00498 G1 X50.119 Y.146 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.629 Y.896 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G1 X50.97 Y0 E.01163 G1 X50.896 Y-.371 E.01163 G1 X50.686 Y-.686 E.01163 G1 X50.371 Y-.896 E.01163 G1 X50 Y-.97 E.01163 G1 X49.629 Y-.896 E.01163 G1 X49.314 Y-.686 E.01163 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.596 Y.874 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X48.816 Y.633 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.046 Y.954 E.01213 G1 X49.367 Y1.184 E.01214 G1 X49.737 Y1.323 E.01214 G1 X50.132 Y1.336 E.01213 G1 X50.516 Y1.246 E.01214 G1 X50.852 Y1.038 E.01214 G1 X51.122 Y.749 E.01214 G1 X51.285 Y.39 E.01213 G1 X51.349 Y0 E.01214 G1 X51.246 Y-.516 E.01617 G1 X51.038 Y-.852 E.01214 G1 X50.749 Y-1.122 E.01213 G1 X50.39 Y-1.285 E.01214 G1 X50 Y-1.349 E.01214 G1 X49.61 Y-1.285 E.01214 G1 X49.251 Y-1.122 E.01214 G1 X48.962 Y-.852 E.01214 G1 X48.754 Y-.516 E.01213 G1 X48.664 Y-.132 E.01214 G1 X48.677 Y.263 E.01213 G1 X48.802 Y.595 E.01091 ;LAYER_CHANGE ;Z:30.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;30.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X48.677 Y.263 G1 X48.664 Y-.132 G1 X48.754 Y-.516 G1 X48.962 Y-.852 G1 X49.251 Y-1.122 G1 X49.31 Y-1.148 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.8 I.794 J.922 P1 F30000 G1 X50 Y-1.743 Z30.8 G1 Z30.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.42 Y-2.111 I.008 J2.15 E.01401 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.15 I-.815 J-1.989 E.25017 G1 X50.019 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01501 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.979 Y-2.584 E.01494 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.792 Y-1.863 ;WIPE_END G1 X49.148 Y-1.038 Z30.8 F30000 G1 Z30.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.182 Y-1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.498 Y-.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.873 Y-.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F1200 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.912 Y-.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.328 Y.491 E.00881 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 ;LAYER_CHANGE ;Z:30.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;30.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.146 Y-.565 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z31 I1.208 J-.15 P1 F30000 G1 X50 Y-1.743 Z31 G1 Z30.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.02 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01498 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.0156 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.01559 G1 X47.461 Y.505 E.0156 G1 X47.411 Y0 E.0156 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.98 Y-2.585 E.01498 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.792 Y-1.862 ;WIPE_END G1 X50.852 Y1.038 Z31 F30000 G1 Z30.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X51.122 Y.749 E.01214 G1 X51.285 Y.39 E.01213 G1 X51.349 Y0 E.01214 G1 X51.246 Y-.516 E.01617 G1 X51.038 Y-.852 E.01213 G1 X50.749 Y-1.122 E.01214 G1 X50.39 Y-1.285 E.01214 G1 X50 Y-1.349 E.01214 G1 X49.61 Y-1.285 E.01214 G1 X49.251 Y-1.122 E.01214 G1 X48.962 Y-.852 E.01214 G1 X48.754 Y-.516 E.01213 G1 X48.664 Y-.132 E.01214 G1 X48.677 Y.263 E.01214 G1 X48.816 Y.633 E.01214 G1 X49.046 Y.954 E.01213 G1 X49.367 Y1.184 E.01214 G1 X49.737 Y1.323 E.01214 G1 X50.132 Y1.336 E.01214 G1 X50.516 Y1.246 E.01214 G1 X50.818 Y1.059 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.686 Y.686 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.896 Y.371 E.01163 G1 X50.97 Y0 E.01163 G1 X50.896 Y-.371 E.01163 G1 X50.686 Y-.686 E.01163 G1 X50.371 Y-.896 E.01163 G1 X50 Y-.97 E.01163 G1 X49.629 Y-.896 E.01163 G1 X49.314 Y-.686 E.01163 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.653 Y.708 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F1200 G1 X50.199 Y-.02 E.00498 G1 X50.127 Y-.154 E.00498 G1 X49.98 Y-.199 E.00498 G1 X49.846 Y-.127 E.00498 G1 X49.801 Y.02 E.00498 G1 X49.873 Y.154 E.00498 G1 X50.02 Y.199 E.00498 G1 X50.119 Y.146 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.277 Y-.519 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50 Y-.591 E.0088 G1 X49.723 Y-.519 E.0088 G1 X49.509 Y-.328 E.0088 G1 X49.415 Y-.058 E.0088 G1 X49.454 Y.226 E.0088 G1 X49.627 Y.455 E.00881 G1 X49.885 Y.58 E.0088 G1 X50.171 Y.563 E.0088 G1 X50.418 Y.418 E.0088 G1 X50.563 Y.171 E.0088 G1 X50.585 Y-.058 E.00705 G1 X50.491 Y-.328 E.0088 G1 X50.307 Y-.492 E.00758 ;LAYER_CHANGE ;Z:30.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;30.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.491 Y-.328 G1 X50.585 Y-.058 G1 X50.563 Y.171 G1 X50.418 Y.418 G1 X50.171 Y.563 G1 X49.885 Y.58 G1 X49.627 Y.455 G1 X49.572 Y.382 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z31.2 I1.193 J.24 P1 F30000 G1 X50 Y-1.743 Z31.2 G1 Z30.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.151 I-.419 J2.105 E.43209 G1 X50.021 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01493 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.982 Y-2.585 E.01502 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.794 Y-1.861 ;WIPE_END G1 X49.148 Y1.038 Z31.2 F30000 G1 Z30.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01213 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442578 G1 F1200 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.088 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.00881 G1 X50.519 Y.277 E.0088 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.567 Y-.778 E.0104 ;LAYER_CHANGE ;Z:31 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;31 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y.189 G1 X50.806 Y.539 G1 X50.539 Y.806 G1 X50.402 Y.863 ;WIPE_END ;AFTER_LAYER_CHANGE ;31 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z31.4 I1.203 J-.186 P1 F30000 G1 X50 Y-1.742 Z31.4 G1 Z31 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 M73 P98 R0 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.42 Y-2.111 I.008 J2.15 E.01401 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.15 I-.815 J-1.989 E.25017 G1 X50.023 Y-2.587 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01488 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.0156 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.983 Y-2.586 E.01508 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.795 Y-1.86 ;WIPE_END G1 X50.127 Y-.154 Z31.4 F30000 G1 Z31 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442578 G1 F1200 G1 X49.98 Y-.199 E.00498 G1 X49.846 Y-.127 E.00498 G1 X49.801 Y.02 E.00498 G1 X49.873 Y.154 E.00498 G1 X50.02 Y.199 E.00498 G1 X50.154 Y.127 E.00498 G1 X50.199 Y-.02 E.00498 G1 X50.146 Y-.119 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.171 Y.563 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.418 Y.418 E.0088 G1 X50.563 Y.171 E.0088 G1 X50.585 Y-.058 E.00705 G1 X50.491 Y-.328 E.0088 G1 X50.277 Y-.519 E.0088 G1 X50 Y-.591 E.0088 G1 X49.723 Y-.519 E.00881 G1 X49.509 Y-.328 E.0088 G1 X49.415 Y-.058 E.00881 G1 X49.454 Y.226 E.0088 G1 X49.627 Y.455 E.00881 G1 X49.885 Y.58 E.0088 G1 X50.131 Y.565 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.371 Y.896 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G1 X50.97 Y0 E.01163 G1 X50.896 Y-.371 E.01163 G1 X50.686 Y-.686 E.01163 G1 X50.371 Y-.896 E.01163 G1 X50 Y-.97 E.01163 G1 X49.629 Y-.896 E.01163 G1 X49.314 Y-.686 E.01163 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.332 Y.904 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.852 Y1.038 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X51.122 Y.749 E.01214 G1 X51.285 Y.39 E.01213 G1 X51.349 Y0 E.01214 G1 X51.246 Y-.516 E.01617 G1 X51.038 Y-.852 E.01214 G1 X50.749 Y-1.122 E.01214 G1 X50.39 Y-1.285 E.01214 G1 X50 Y-1.349 E.01214 G1 X49.61 Y-1.285 E.01214 G1 X49.251 Y-1.122 E.01214 G1 X48.962 Y-.852 E.01214 G1 X48.754 Y-.516 E.01214 G1 X48.664 Y-.132 E.01214 G1 X48.677 Y.263 E.01213 G1 X48.816 Y.633 E.01214 G1 X49.046 Y.954 E.01213 G1 X49.367 Y1.184 E.01214 G1 X49.737 Y1.323 E.01214 G1 X50.132 Y1.336 E.01213 G1 X50.516 Y1.246 E.01214 G1 X50.818 Y1.059 E.01091 ;LAYER_CHANGE ;Z:31.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;31.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.516 Y1.246 G1 X50.132 Y1.336 G1 X49.737 Y1.323 G1 X49.367 Y1.184 G1 X49.046 Y.954 G1 X49.008 Y.901 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z31.6 I1.139 J.428 P1 F30000 G1 X50 Y-1.743 Z31.6 G1 Z31.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.15 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.42 Y-2.111 I.008 J2.15 E.01401 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.96 Y-2.15 I-.815 J-1.989 E.25017 G1 X50.025 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01481 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.0156 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.0156 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.0156 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.0156 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.986 Y-2.587 E.01515 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.796 Y-1.859 ;WIPE_END G1 X48.962 Y-.852 Z31.6 F30000 G1 Z31.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X48.754 Y-.516 E.01213 G1 X48.664 Y-.132 E.01214 G1 X48.677 Y.263 E.01213 G1 X48.816 Y.633 E.01214 G1 X49.046 Y.954 E.01214 G1 X49.367 Y1.184 E.01214 G1 X49.737 Y1.323 E.01214 G1 X50.132 Y1.336 E.01214 G1 X50.516 Y1.246 E.01214 G1 X50.852 Y1.038 E.01214 G1 X51.122 Y.749 E.01214 G1 X51.285 Y.39 E.01213 G1 X51.349 Y0 E.01214 G1 X51.246 Y-.516 E.01617 G1 X51.038 Y-.852 E.01214 G1 X50.749 Y-1.122 E.01213 G1 X50.39 Y-1.285 E.01214 G1 X50 Y-1.349 E.01214 G1 X49.61 Y-1.285 E.01214 G1 X49.251 Y-1.122 E.01213 G1 X48.992 Y-.879 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-.97 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.629 Y-.896 E.01163 G1 X49.314 Y-.686 E.01163 G1 X49.104 Y-.371 E.01163 G1 X49.03 Y0 E.01163 G1 X49.104 Y.371 E.01163 G1 X49.314 Y.686 E.01163 G1 X49.629 Y.896 E.01163 G1 X50 Y.97 E.01163 G1 X50.371 Y.896 E.01163 G1 X50.686 Y.686 E.01163 G1 X50.896 Y.371 E.01163 G1 X50.97 Y0 E.01163 G1 X50.896 Y-.371 E.01163 G1 X50.686 Y-.686 E.01163 G1 X50.371 Y-.896 E.01163 G1 X50.039 Y-.962 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.277 Y-.519 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50 Y-.591 E.0088 G1 X49.723 Y-.519 E.0088 G1 X49.509 Y-.328 E.0088 G1 X49.415 Y-.058 E.0088 G1 X49.454 Y.226 E.0088 G1 X49.627 Y.455 E.00881 G1 X49.885 Y.58 E.0088 G1 X50.171 Y.563 E.0088 G1 X50.418 Y.418 E.0088 G1 X50.563 Y.171 E.0088 G1 X50.585 Y-.058 E.00705 G1 X50.491 Y-.328 E.0088 G1 X50.307 Y-.492 E.00758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.846 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.44258 G1 F1200 G1 X49.801 Y.02 E.00498 G1 X49.873 Y.154 E.00498 G1 X50.02 Y.199 E.00498 G1 X50.154 Y.127 E.00498 G1 X50.199 Y-.02 E.00498 G1 X50.127 Y-.154 E.00498 G1 X49.98 Y-.199 E.00498 G1 X49.881 Y-.146 E.00368 ;LAYER_CHANGE ;Z:31.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;31.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.98 Y-.199 G1 X50.127 Y-.154 G1 X50.199 Y-.02 G1 X50.154 Y.127 G1 X50.02 Y.199 G1 X49.873 Y.154 G1 X49.801 Y.02 G1 X49.846 Y-.127 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z31.8 I1.211 J.116 P1 F30000 G1 X50 Y-1.743 Z31.8 G1 Z31.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.028 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01474 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.0156 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.01559 G1 X48.169 Y-1.831 E.0156 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X49.988 Y-2.588 E.01522 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.798 Y-1.857 ;WIPE_END G1 X49.868 Y-1.336 Z31.8 F30000 G1 Z31.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01213 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01213 G1 X50.263 Y-1.323 E.01214 G1 X49.908 Y-1.335 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.806 Y-.539 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.822 Y-.502 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.02 Y-.199 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F1200 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.055 Y-.18 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 ;LAYER_CHANGE ;Z:31.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;31.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.829 Y-.563 G1 X50.115 Y-.58 G1 X50.146 Y-.565 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32 I1.208 J-.15 P1 F30000 G1 X50 Y-1.743 Z32 G1 Z31.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 M73 P99 R0 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.03 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01466 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.01559 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.01559 G1 X47.461 Y.505 E.0156 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.0156 G1 X49.495 Y-2.539 E.01559 G1 X49.991 Y-2.588 E.01531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.8 Y-1.856 ;WIPE_END G1 X50.199 Y.02 Z32 F30000 G1 Z31.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442578 G1 F1200 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.18 Y.055 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.585 Y.058 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.0088 G1 X50.574 Y.096 E.00582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.539 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.502 Y.822 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.633 Y1.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.595 Y1.198 E.01091 ;LAYER_CHANGE ;Z:31.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;31.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y1.323 G1 X49.868 Y1.336 G1 X49.484 Y1.246 G1 X49.148 Y1.038 G1 X48.878 Y.749 G1 X48.852 Y.69 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32.2 I1.1 J.52 P1 F30000 G1 X50 Y-1.743 Z32.2 G1 Z31.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01133 G3 X49.96 Y-1.742 I-.34 J1.705 E.3497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01399 G3 X49.96 Y-2.152 I-.419 J2.105 E.43209 G1 X50.033 Y-2.586 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01457 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.0156 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.0156 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X49.994 Y-2.588 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.802 Y-1.854 ;WIPE_END G1 X49.148 Y1.038 Z32.2 F30000 G1 Z31.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X49.484 Y1.246 E.01214 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01214 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01213 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.585 Y.058 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.0088 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.00881 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.00881 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.574 Y.096 E.00582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.199 Y.02 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442579 G1 F1200 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.154 E.00498 G1 X50.18 Y.055 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y-.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.498 Y-.822 E.0104 ;LAYER_CHANGE ;Z:32 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.811 Y-.951 G1 X50.189 Y-.951 G1 X50.539 Y-.806 G1 X50.806 Y-.539 G1 X50.951 Y-.189 G1 X50.951 Y-.042 ;WIPE_END ;AFTER_LAYER_CHANGE ;32 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32.4 I1.064 J-.59 P1 F30000 G1 X50.008 Y-1.742 Z32.4 G1 Z32 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01106 G3 X49.968 Y-1.742 I-.336 J1.706 E.34994 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.009 Y-2.151 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.0137 G3 X49.969 Y-2.151 I-.415 J2.107 E.43244 G1 X50.037 Y-2.585 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01447 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.0156 G1 X51.831 Y-1.831 E.01559 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.01559 G1 X52.539 Y-.505 E.0156 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.01559 G1 X48.562 Y2.153 E.0156 G1 X48.169 Y1.831 E.01559 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.01559 G1 X47.461 Y.505 E.0156 G1 X47.411 Y0 E.0156 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.01559 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01558 G1 X49.997 Y-2.587 E.0155 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.805 Y-1.852 ;WIPE_END G1 X50.154 Y-.127 Z32.4 F30000 G1 Z32 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442087 G1 F1200 G1 X50.005 Y-.201 E.0054 G1 X49.858 Y-.142 E.00516 G1 X49.799 Y0 E.00501 G1 X49.858 Y.142 E.005 G1 X50 Y.201 E.00501 G1 X50.142 Y.142 E.005 G1 X50.199 Y.02 E.0044 G1 X50.166 Y-.089 E.00369 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.115 Y-.58 E.00879 G1 X49.827 Y-.562 E.00888 G1 X49.582 Y-.418 E.00873 G1 X49.437 Y-.171 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00759 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.808 Y-.95 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.461 Y-.806 E.01153 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.848 Y-.95 E.0105 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.866 Y-1.335 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.484 Y-1.246 E.01205 G1 X49.148 Y-1.037 E.01215 G1 X48.878 Y-.749 E.01212 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01213 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01213 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.632 Y-1.184 E.01216 G1 X50.263 Y-1.323 E.01211 G1 X49.906 Y-1.333 E.01098 ;LAYER_CHANGE ;Z:32.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y-1.323 G1 X50.632 Y-1.184 G1 X50.954 Y-.954 G1 X51.184 Y-.633 G1 X51.323 Y-.263 G1 X51.323 Y-.2 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32.6 I.925 J-.791 P1 F30000 G1 X50.005 Y-1.742 Z32.6 G1 Z32.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01115 G3 X49.966 Y-1.742 I-.337 J1.706 E.34986 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.006 Y-2.151 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01379 G3 X49.966 Y-2.151 I-.416 J2.106 E.43226 G1 X50.04 Y-2.585 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01436 G1 X50.991 Y-2.392 E.01559 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.01559 G1 X47.461 Y.505 E.0156 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.01559 G1 X50 Y-2.588 E.0156 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.808 Y-1.85 ;WIPE_END G1 X50.154 Y-.127 Z32.6 F30000 G1 Z32.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.442252 G1 F1200 G1 X50.004 Y-.201 E.00546 G1 X49.858 Y-.142 E.00511 G1 X49.799 Y0 E.005 G1 X49.858 Y.142 E.00501 G1 X50 Y.201 E.00501 G1 X50.142 Y.142 E.00501 G1 X50.199 Y.02 E.0044 G1 X50.166 Y-.089 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.115 Y-.58 E.0088 G1 X49.828 Y-.562 E.00885 G1 X49.582 Y-.418 E.00876 G1 X49.437 Y-.171 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.058 Y.585 E.00881 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00759 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.809 Y-.951 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.461 Y-.806 E.01156 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.849 Y-.951 E.01046 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.867 Y-1.335 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.484 Y-1.246 E.01208 G1 X49.148 Y-1.037 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01213 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01213 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.632 Y-1.184 E.01215 G1 X50.263 Y-1.323 E.01212 G1 X49.907 Y-1.334 E.01096 ;LAYER_CHANGE ;Z:32.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.263 Y-1.323 G1 X50.632 Y-1.184 G1 X50.954 Y-.954 G1 X51.184 Y-.633 G1 X51.323 Y-.263 G1 X51.323 Y-.199 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32.8 I.925 J-.791 P1 F30000 G1 X50.003 Y-1.743 Z32.8 G1 Z32.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.34 Y-1.709 E.01124 G3 X49.963 Y-1.742 I-.338 J1.705 E.34978 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.003 Y-2.152 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01389 G3 X49.963 Y-2.151 I-.418 J2.106 E.43217 G1 X50.043 Y-2.585 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01426 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.0156 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.0156 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.01559 G1 X50.991 Y2.392 E.0156 G1 X50.505 Y2.539 E.01559 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.0156 G1 X47.411 Y0 E.0156 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.0156 G1 X49.495 Y-2.539 E.01559 G1 X50.003 Y-2.589 E.0157 G1 X50.003 Y-2.589 E.00001 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.81 Y-1.848 ;WIPE_END G1 X49.868 Y-1.335 Z32.8 F30000 G1 Z32.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X49.484 Y-1.246 E.01211 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01213 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01213 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01213 G1 X49.148 Y1.038 E.01214 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01213 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01213 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01213 G1 X49.908 Y-1.334 E.01093 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.81 Y-.951 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.461 Y-.806 E.0116 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.461 Y.806 E.01163 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.85 Y-.951 E.01043 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.154 Y-.127 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442415 G1 F1200 G1 X50.02 Y-.199 E.00495 G1 X49.873 Y-.154 E.00501 G1 X49.801 Y-.02 E.00498 G1 X49.845 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.127 Y.155 E.00498 G1 X50.199 Y.02 E.00498 G1 X50.166 Y-.089 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.058 Y.585 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.373 Y-.455 E.00881 G1 X50.115 Y-.58 E.0088 G1 X49.828 Y-.563 E.00883 G1 X49.582 Y-.418 E.00878 G1 X49.437 Y-.171 E.00881 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.00881 G1 X49.774 Y.546 E.0088 G1 X50.018 Y.58 E.00758 ;LAYER_CHANGE ;Z:32.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;32.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.42 Y.115 G1 X49.437 Y-.171 G1 X49.582 Y-.418 G1 X49.828 Y-.563 G1 X50.115 Y-.58 G1 X50.146 Y-.565 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z33 I1.208 J-.15 P1 F30000 G1 X50 Y-1.742 Z33 G1 Z32.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.34 Y-1.709 I.006 J1.741 E.01135 G3 X50.667 Y1.61 I-.352 J1.711 E.14711 G3 X49.96 Y-1.741 I-.66 J-1.611 E.20236 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.004 Y-2.151 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.42 Y-2.111 E.01385 G3 X50.823 Y1.988 I-.434 J2.112 E.18164 G3 X49.964 Y-2.15 I-.815 J-1.989 E.25031 G1 X50.047 Y-2.584 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.505 Y-2.539 E.01415 G1 X50.991 Y-2.392 E.0156 G1 X51.438 Y-2.153 E.01559 G1 X51.831 Y-1.831 E.0156 G1 X52.153 Y-1.438 E.01559 G1 X52.392 Y-.991 E.0156 G1 X52.539 Y-.505 E.01559 G1 X52.589 Y0 E.01559 G1 X52.539 Y.505 E.01559 G1 X52.392 Y.991 E.01559 G1 X52.153 Y1.438 E.0156 G1 X51.831 Y1.831 E.01559 G1 X51.438 Y2.153 E.0156 G1 X50.991 Y2.392 E.01559 G1 X50.505 Y2.539 E.0156 G1 X50 Y2.589 E.01559 G1 X49.495 Y2.539 E.01559 G1 X49.009 Y2.392 E.0156 G1 X48.562 Y2.153 E.01559 G1 X48.169 Y1.831 E.0156 G1 X47.847 Y1.438 E.01559 G1 X47.608 Y.991 E.0156 G1 X47.461 Y.505 E.01559 G1 X47.411 Y0 E.01559 G1 X47.461 Y-.505 E.01559 G1 X47.608 Y-.991 E.01559 G1 X47.847 Y-1.438 E.0156 G1 X48.169 Y-1.831 E.01559 G1 X48.562 Y-2.153 E.0156 G1 X49.009 Y-2.392 E.01559 G1 X49.495 Y-2.539 E.0156 G1 X50 Y-2.589 E.01559 G1 X50.007 Y-2.588 E.00022 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.505 Y-2.539 G1 X50.991 Y-2.392 G1 X51.438 Y-2.153 G1 X51.813 Y-1.845 ;WIPE_END G1 X49.148 Y1.038 Z33 F30000 G1 Z32.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X49.484 Y1.246 E.01213 G1 X49.868 Y1.336 E.01214 G1 X50.263 Y1.323 E.01213 G1 X50.633 Y1.184 E.01214 G1 X50.954 Y.954 E.01214 G1 X51.184 Y.633 E.01214 G1 X51.323 Y.263 E.01214 G1 X51.323 Y-.263 E.01617 G1 X51.184 Y-.633 E.01214 G1 X50.954 Y-.954 E.01213 G1 X50.633 Y-1.184 E.01214 G1 X50.263 Y-1.323 E.01214 G1 X49.868 Y-1.336 E.01214 G1 X49.484 Y-1.246 E.01214 G1 X49.148 Y-1.038 E.01214 G1 X48.878 Y-.749 E.01214 G1 X48.715 Y-.39 E.01214 G1 X48.651 Y0 E.01214 G1 X48.715 Y.39 E.01214 G1 X48.878 Y.749 E.01214 G1 X49.121 Y1.008 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.461 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F1200 G1 X49.811 Y.951 E.01163 G1 X50.189 Y.951 E.01163 G1 X50.539 Y.806 E.01163 G1 X50.806 Y.539 E.01163 G1 X50.951 Y.189 E.01163 G1 X50.951 Y-.189 E.01163 G1 X50.806 Y-.539 E.01163 G1 X50.539 Y-.806 E.01163 G1 X50.189 Y-.951 E.01163 G1 X49.811 Y-.951 E.01163 G1 X49.461 Y-.806 E.01163 G1 X49.194 Y-.539 E.01163 G1 X49.049 Y-.189 E.01163 G1 X49.049 Y.189 E.01163 G1 X49.194 Y.539 E.01163 G1 X49.433 Y.778 E.0104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.127 Y.154 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.442577 G1 F1200 G1 X50.199 Y.02 E.00498 G1 X50.154 Y-.127 E.00498 G1 X50.02 Y-.199 E.00498 G1 X49.873 Y-.154 E.00498 G1 X49.801 Y-.02 E.00498 G1 X49.846 Y.127 E.00498 G1 X49.98 Y.199 E.00498 G1 X50.089 Y.166 E.00368 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.373 Y-.455 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F1200 G1 X50.115 Y-.58 E.0088 G1 X49.829 Y-.563 E.0088 G1 X49.582 Y-.418 E.00881 G1 X49.437 Y-.171 E.0088 G1 X49.42 Y.115 E.0088 G1 X49.545 Y.373 E.0088 G1 X49.774 Y.546 E.00881 G1 X50.058 Y.585 E.0088 G1 X50.328 Y.491 E.0088 G1 X50.519 Y.277 E.00881 G1 X50.585 Y.058 E.00705 G1 X50.546 Y-.226 E.0088 G1 X50.397 Y-.423 E.00758 ;LAYER_CHANGE ;Z:32.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.546 Y-.226 G1 X50.585 Y.058 G1 X50.519 Y.277 G1 X50.328 Y.491 G1 X50.058 Y.585 G1 X49.774 Y.546 G1 X49.545 Y.373 G1 X49.506 Y.291 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z33.2 I1.13 J.453 P1 F30000 G1 X50 Y-.943 Z33.2 G1 Z32.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.184 Y-.925 E.00613 G3 X49.96 Y-.942 I-.184 J.922 E.18857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.351 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.264 Y-1.326 I.005 J1.35 E.0088 G3 X50.517 Y1.249 I-.273 J1.327 E.11411 G3 X49.96 Y-1.35 I-.512 J-1.249 E.15667 G1 X50 Y-1.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.341 Y-1.755 E.01052 G1 X50.349 Y-1.755 E.00026 G3 X49.96 Y-1.789 I-.349 J1.75 E.33254 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.341 Y-1.755 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.812 ;WIPE_END G1 X50.525 Y.104 Z33.2 F30000 G1 Z32.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.445 Y.298 I-.52 J-.102 E.09595 G1 X50.51 Y.141 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389954 G1 F1200 G1 X50.144 Y-.096 E.00376 G1 X50.034 Y-.17 E.00376 G1 X49.904 Y-.144 E.00376 G1 X49.83 Y-.034 E.00376 G1 X49.856 Y.096 E.00376 G1 X49.966 Y.17 E.00376 G1 X50.096 Y.144 E.00376 G1 X50.148 Y.067 E.00262 ;LAYER_CHANGE ;Z:33 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.096 Y.144 G1 X49.966 Y.17 G1 X49.856 Y.096 G1 X49.83 Y-.034 G1 X49.904 Y-.144 G1 X50.034 Y-.17 G1 X50.144 Y-.096 G1 X50.17 Y.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;33 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z33.4 I1.199 J-.209 P1 F30000 G1 X50 Y-.943 Z33.4 G1 Z33 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.184 Y-.925 E.00613 G3 X49.96 Y-.942 I-.184 J.922 E.18857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.351 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.264 Y-1.326 I.005 J1.35 E.0088 G3 X50.517 Y1.249 I-.273 J1.327 E.11411 G3 X49.96 Y-1.35 I-.512 J-1.249 E.15667 G1 X50 Y-1.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.312 Y-1.758 E.00963 G1 X50.349 Y-1.755 E.00115 G3 X49.96 Y-1.789 I-.349 J1.75 E.33254 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.312 Y-1.758 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.812 ;WIPE_END G1 X49.475 Y.105 Z33.4 F30000 G1 Z33 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X49.475 Y-.104 I.52 J-.105 E.09595 G1 X49.475 Y.065 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389959 G1 F1200 G1 X50.144 Y-.096 E.00376 G1 X50.034 Y-.17 E.00376 G1 X49.904 Y-.144 E.00376 G1 X49.83 Y-.034 E.00376 G1 X49.856 Y.096 E.00376 G1 X49.966 Y.17 E.00376 G1 X50.096 Y.144 E.00376 G1 X50.148 Y.067 E.00262 ;LAYER_CHANGE ;Z:33.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.096 Y.144 G1 X49.966 Y.17 G1 X49.856 Y.096 G1 X49.83 Y-.034 G1 X49.904 Y-.144 G1 X50.034 Y-.17 G1 X50.144 Y-.096 G1 X50.17 Y.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z33.6 I1.199 J-.209 P1 F30000 G1 X50 Y-.943 Z33.6 G1 Z33.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.184 Y-.925 E.00613 G3 X49.96 Y-.942 I-.184 J.922 E.18857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.352 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.24 Y-1.328 I-.006 J1.292 E.00802 G3 X49.736 Y-1.326 I-.246 J1.326 E.26422 G3 X49.96 Y-1.351 I.258 J1.266 E.00748 G1 X50 Y-1.783 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G3 X50.283 Y-1.761 I.005 J1.785 E.00873 G1 X50.349 Y-1.755 E.00204 G3 X50.685 Y1.653 I-.361 J1.756 E.13988 G3 X49.96 Y-1.782 I-.68 J-1.651 E.19236 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.283 Y-1.761 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.811 ;WIPE_END G1 X49.475 Y.105 Z33.6 F30000 G1 Z33.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X49.475 Y-.104 I.52 J-.105 E.09595 G1 X49.475 Y.065 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389958 G1 F1200 G1 X50.144 Y-.096 E.00376 G1 X50.034 Y-.17 E.00376 G1 X49.904 Y-.144 E.00376 G1 X49.83 Y-.034 E.00376 G1 X49.856 Y.096 E.00376 G1 X49.966 Y.17 E.00376 G1 X50.096 Y.144 E.00376 G1 X50.148 Y.067 E.00262 ;LAYER_CHANGE ;Z:33.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.096 Y.144 G1 X49.966 Y.17 G1 X49.856 Y.096 G1 X49.83 Y-.034 G1 X49.904 Y-.144 G1 X50.034 Y-.17 G1 X50.144 Y-.096 G1 X50.17 Y.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z33.8 I1.199 J-.209 P1 F30000 G1 X50 Y-.943 Z33.8 G1 Z33.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.183 Y-.925 E.00611 G3 X49.96 Y-.942 I-.183 J.922 E.18859 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.345 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.211 Y-1.331 I.006 J1.471 E.00703 G3 X49.483 Y-1.249 I-.219 J1.331 E.25652 G3 X49.96 Y-1.345 I.524 J1.374 E.01623 G1 X50 Y-1.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.254 Y-1.764 E.00784 G1 X50.349 Y-1.755 E.00293 G3 X49.96 Y-1.789 I-.349 J1.75 E.33254 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.254 Y-1.764 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.812 ;WIPE_END G1 X50.104 Y-.525 Z33.8 F30000 G1 Z33.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.298 Y-.445 I-.102 J.52 E.09595 G1 X50.141 Y-.51 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389959 G1 F1200 G1 X50.144 Y-.096 E.00376 G1 X50.034 Y-.17 E.00376 G1 X49.904 Y-.144 E.00376 G1 X49.83 Y-.034 E.00376 G1 X49.856 Y.096 E.00376 G1 X49.966 Y.17 E.00376 G1 X50.096 Y.144 E.00376 G1 X50.148 Y.067 E.00262 ;LAYER_CHANGE ;Z:33.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;33.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.096 Y.144 G1 X49.966 Y.17 G1 X49.856 Y.096 G1 X49.83 Y-.034 G1 X49.904 Y-.144 G1 X50.034 Y-.17 G1 X50.144 Y-.096 G1 X50.17 Y.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z34 I1.199 J-.209 P1 F30000 G1 X50 Y-.943 Z34 G1 Z33.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.143 Y-.929 I-.01 J.837 E.00476 G3 X49.816 Y-.925 I-.152 J.928 E.18507 G3 X49.96 Y-.942 I.173 J.819 E.00482 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.348 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.182 Y-1.334 I-.014 J1.323 E.00608 G3 X49.249 Y-1.124 I-.19 J1.335 E.2487 G3 X49.96 Y-1.348 I.737 J1.098 E.02507 G1 X50 Y-1.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.225 Y-1.767 E.00695 G1 X50.349 Y-1.755 E.00383 G3 X49.96 Y-1.789 I-.349 J1.75 E.33254 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.225 Y-1.767 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.812 ;WIPE_END G1 X50.104 Y-.525 Z34 F30000 G1 Z33.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.299 Y-.445 I-.101 J.521 E.0959 G1 X50.141 Y-.51 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389691 G1 F1200 G1 X50.143 Y-.098 E.0038 G1 X50.032 Y-.17 E.00374 G1 X49.903 Y-.144 E.00372 G1 X49.83 Y-.034 E.00375 G1 X49.856 Y.097 E.00375 G1 X49.966 Y.17 E.00376 G1 X50.097 Y.144 E.00376 G1 X50.148 Y.067 E.00263 ;LAYER_CHANGE ;Z:33.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.097 Y.144 G1 X49.966 Y.17 G1 X49.856 Y.097 G1 X49.83 Y-.034 G1 X49.903 Y-.144 G1 X50.032 Y-.17 G1 X50.143 Y-.098 G1 X50.17 Y.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z34.2 I1.199 J-.21 P1 F30000 G1 X50 Y-.938 Z34.2 G1 Z33.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.114 Y-.932 I0 J1.008 E.00378 G3 X49.639 Y-.871 I-.122 J.932 E.17996 G3 X49.96 Y-.937 I.361 J.941 E.01091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.345 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.154 Y-1.337 I.003 J1.377 E.0051 G3 X49.044 Y-.956 I-.161 J1.339 E.2408 G3 X49.96 Y-1.344 I.959 J.988 E.03377 G1 X50 Y-1.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.196 Y-1.77 E.00606 G1 X50.349 Y-1.755 E.00472 G3 X49.96 Y-1.789 I-.349 J1.75 E.33254 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.196 Y-1.77 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.812 ;WIPE_END G1 X50.104 Y-.525 Z34.2 F30000 G1 Z33.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.299 Y-.444 I-.1 J.521 E.09587 G1 X50.141 Y-.509 E.00525 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y-.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389557 G1 F1200 G1 X50.098 Y-.144 E.00371 G1 X49.965 Y-.17 E.00382 G1 X49.855 Y-.096 E.00373 G1 X49.83 Y.034 E.00375 G1 X49.904 Y.144 E.00375 G1 X50.034 Y.17 E.00376 G1 X50.145 Y.096 E.00376 G1 X50.163 Y.005 E.00263 ;LAYER_CHANGE ;Z:34 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.145 Y.096 G1 X50.034 Y.17 G1 X49.904 Y.144 G1 X49.83 Y.034 G1 X49.855 Y-.096 G1 X49.965 Y-.17 G1 X50.098 Y-.144 G1 X50.17 Y-.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;34 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z34.4 I1.204 J-.177 P1 F30000 G1 X50.038 Y-.933 Z34.4 G1 Z34 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.085 Y-.934 E.00155 G3 X49.476 Y-.784 I-.092 J.935 E.17464 G3 X49.816 Y-.924 I.511 J.76 E.01228 G1 X49.998 Y-.931 E.00604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.345 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.125 Y-1.34 I.003 J1.377 E.00414 G3 X49.044 Y-.956 I-.132 J1.342 E.24173 G3 X49.96 Y-1.344 I.959 J.988 E.03377 G1 X50 Y-1.78 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G3 X50.167 Y-1.773 I.004 J1.801 E.00515 G3 X48.347 Y-.685 I-.174 J1.776 E.27474 G3 X49.96 Y-1.779 I1.657 J.706 E.06329 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.167 Y-1.773 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.811 ;WIPE_END G1 X50.525 Y-.107 Z34.4 F30000 G1 Z34 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X50.442 Y-.302 E.0065 G1 X50.264 Y-.468 E.00749 G1 X50.069 Y-.539 E.00637 G1 X49.786 Y-.501 E.00877 G2 X50.505 Y.209 I.215 J.501 E.06562 G1 X50.522 Y-.067 E.00851 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.173 Y.033 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.384717 G1 F1200 G1 X50.143 Y-.102 E.00385 G1 X50.046 Y-.173 E.00336 G1 X49.873 Y-.127 E.00498 G1 X49.82 Y0 E.00383 G1 X49.873 Y.127 E.00383 G1 X50 Y.18 E.00383 G1 X50.127 Y.127 E.00383 G1 X50.156 Y.069 E.00181 ;LAYER_CHANGE ;Z:34.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.127 Y.127 G1 X50 Y.18 G1 X49.873 Y.127 G1 X49.82 Y0 G1 X49.873 Y-.127 G1 X50.046 Y-.173 G1 X50.143 Y-.102 G1 X50.173 Y.033 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z34.6 I1.207 J-.154 P1 F30000 G1 X50.05 Y-.937 Z34.6 G1 Z34.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.056 Y-.937 E.0002 G3 X49.639 Y-.871 I-.064 J.938 E.18188 G3 X49.817 Y-.921 I.368 J.968 E.00613 G1 X50.01 Y-.934 E.00642 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.345 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G3 X50.096 Y-1.342 I.005 J1.381 E.00318 G3 X49.044 Y-.956 I-.103 J1.345 E.24273 G3 X49.96 Y-1.345 I.961 J.992 E.03377 G1 X50 Y-1.78 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G3 X50.138 Y-1.775 I.005 J1.803 E.00425 G3 X48.347 Y-.685 I-.145 J1.779 E.27565 G3 X49.96 Y-1.78 I1.658 J.707 E.06329 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.138 Y-1.775 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.585 Y-.811 ;WIPE_END G1 X50.443 Y-.3 Z34.6 F30000 G1 Z34.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G1 X50.277 Y-.459 E.00708 G1 X50.045 Y-.542 E.00755 G1 X49.787 Y-.502 E.008 G2 X50.546 Y0 I.217 J.497 E.07149 G1 X50.456 Y-.263 E.00853 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.172 Y-.036 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38642 G1 F1200 G1 X50.076 Y-.16 E.00437 G1 X49.921 Y-.158 E.00435 G1 X49.829 Y-.037 E.00426 G1 X49.855 Y.098 E.00386 G1 X49.966 Y.172 E.00375 G1 X50.098 Y.145 E.00376 G1 X50.172 Y.033 E.00377 G1 X50.172 Y.004 E.00081 ;LAYER_CHANGE ;Z:34.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.172 Y.033 G1 X50.098 Y.145 G1 X49.966 Y.172 G1 X49.855 Y.098 G1 X49.829 Y-.037 G1 X49.921 Y-.158 G1 X50.076 Y-.16 G1 X50.172 Y-.036 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z34.8 I1.196 J-.226 P1 F30000 G1 X50 Y-.943 Z34.8 G1 Z34.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.184 Y-.925 E.00613 G3 X49.96 Y-.942 I-.184 J.922 E.18857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.352 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.264 Y-1.326 E.00879 G3 X49.96 Y-1.351 I-.263 J1.323 E.27096 G1 X50.003 Y-1.789 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.349 Y-1.755 E.01068 G3 X49.963 Y-1.789 I-.349 J1.75 E.33264 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.586 Y-.809 ;WIPE_END G1 X50.104 Y-.525 Z34.8 F30000 G1 Z34.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.298 Y-.445 I-.102 J.52 E.09595 G1 X50.141 Y-.51 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y-.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389958 G1 F1200 G1 X50.096 Y-.144 E.00376 G1 X49.966 Y-.17 E.00376 G1 X49.856 Y-.096 E.00376 G1 X49.83 Y.034 E.00376 G1 X49.904 Y.144 E.00376 G1 X50.034 Y.17 E.00376 G1 X50.144 Y.096 E.00376 G1 X50.162 Y.005 E.00262 ;LAYER_CHANGE ;Z:34.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;34.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.144 Y.096 G1 X50.034 Y.17 G1 X49.904 Y.144 G1 X49.83 Y.034 G1 X49.856 Y-.096 G1 X49.966 Y-.17 G1 X50.096 Y-.144 G1 X50.17 Y-.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z35 I1.196 J-.224 P1 F30000 G1 X50 Y-.942 Z35 G1 Z34.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G3 X50.184 Y-.925 I.003 J.942 E.00614 G3 X50.361 Y.871 I-.19 J.925 E.07958 G3 X49.96 Y-.941 I-.357 J-.871 E.10886 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.03 Y-1.348 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.038 Y-1.348 E.00026 G3 X49.483 Y-1.249 I-.046 J1.348 E.2623 G3 X49.737 Y-1.319 I.559 J1.523 E.00878 G1 X49.99 Y-1.344 E.00843 G1 X50.006 Y-1.788 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.081 Y-1.781 E.00229 G3 X48.513 Y-.994 I-.087 J1.783 E.28826 G3 X49.968 Y-1.783 I1.476 J.984 E.05294 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.081 Y-1.781 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.589 Y-.804 ;WIPE_END G1 X50.104 Y-.525 Z35 F30000 G1 Z34.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.298 Y-.445 I-.102 J.52 E.09595 G1 X50.141 Y-.51 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389955 G1 F1200 G1 X50.144 Y-.096 E.00376 G1 X50.034 Y-.17 E.00376 G1 X49.904 Y-.144 E.00376 G1 X49.83 Y-.034 E.00376 G1 X49.856 Y.096 E.00376 G1 X49.966 Y.17 E.00376 G1 X50.096 Y.144 E.00376 G1 X50.148 Y.067 E.00262 ;LAYER_CHANGE ;Z:34.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.096 Y.144 G1 X49.966 Y.17 G1 X49.856 Y.096 G1 X49.83 Y-.034 G1 X49.904 Y-.144 G1 X50.034 Y-.17 G1 X50.144 Y-.096 G1 X50.17 Y.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z35.2 I1.199 J-.209 P1 F30000 G1 X50 Y-.943 Z35.2 G1 Z34.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.184 Y-.925 E.00613 G3 X49.96 Y-.942 I-.184 J.922 E.18857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.352 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.264 Y-1.326 E.00879 G3 X49.96 Y-1.351 I-.263 J1.323 E.27096 G1 X49.996 Y-1.78 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.052 Y-1.784 E.00172 G3 X49.006 Y-1.487 I-.059 J1.784 E.31066 G3 X49.651 Y-1.753 I.978 J1.458 E.02158 G1 X49.956 Y-1.777 E.00939 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.052 Y-1.784 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.583 Y-.815 ;WIPE_END G1 X50.104 Y-.525 Z35.2 F30000 G1 Z34.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.298 Y-.445 I-.102 J.52 E.09595 G1 X50.141 Y-.51 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389957 G1 F1200 G1 X50.144 Y-.096 E.00376 G1 X50.034 Y-.17 E.00376 G1 X49.904 Y-.144 E.00376 G1 X49.83 Y-.034 E.00376 G1 X49.856 Y.096 E.00376 G1 X49.966 Y.17 E.00376 G1 X50.096 Y.144 E.00376 G1 X50.148 Y.067 E.00262 ;LAYER_CHANGE ;Z:35 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;35 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.096 Y.144 G1 X49.966 Y.17 G1 X49.856 Y.096 G1 X49.83 Y-.034 G1 X49.904 Y-.144 G1 X50.034 Y-.17 G1 X50.144 Y-.096 G1 X50.17 Y.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;35 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z35.4 I1.199 J-.209 P1 F30000 G1 X50 Y-.943 Z35.4 G1 Z35 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.184 Y-.925 E.00613 G3 X49.96 Y-.942 I-.184 J.922 E.18857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.352 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.264 Y-1.326 E.00879 G3 X49.96 Y-1.351 I-.263 J1.323 E.27096 G1 X49.99 Y-1.784 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50.023 Y-1.787 E.00102 G3 X49.315 Y-1.653 I-.028 J1.786 E.32251 G3 X49.653 Y-1.745 I.786 J2.218 E.01076 G1 X49.95 Y-1.779 E.00919 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50.023 Y-1.787 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.58 Y-.821 ;WIPE_END G1 X49.896 Y-.525 Z35.4 F30000 G1 Z35 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F1200 G2 X50.104 Y-.525 I.104 J.52 E.09595 G1 X49.936 Y-.525 E.00519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.17 Y-.034 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.389957 G1 F1200 G1 X50.096 Y-.144 E.00376 G1 X49.966 Y-.17 E.00376 G1 X49.856 Y-.096 E.00376 G1 X49.83 Y.034 E.00376 G1 X49.904 Y.144 E.00376 G1 X50.034 Y.17 E.00376 G1 X50.144 Y.096 E.00376 G1 X50.162 Y.005 E.00262 ;LAYER_CHANGE ;Z:35.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;35.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X50.144 Y.096 G1 X50.034 Y.17 G1 X49.904 Y.144 G1 X49.83 Y.034 G1 X49.856 Y-.096 G1 X49.966 Y-.17 G1 X50.096 Y-.144 G1 X50.17 Y-.034 ;WIPE_END ;AFTER_LAYER_CHANGE ;35.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z35.6 I1.196 J-.224 P1 F30000 G1 X50 Y-.943 Z35.6 G1 Z35.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1200 G1 X50.184 Y-.925 E.00613 G3 X49.96 Y-.942 I-.184 J.922 E.18857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50 Y-1.352 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F1200 G1 X50.264 Y-1.326 E.00879 G3 X49.96 Y-1.351 I-.263 J1.323 E.27096 G1 X49.983 Y-1.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F1200 G1 X50 Y-1.789 E.00052 G1 X50.349 Y-1.755 E.01078 G3 X49.651 Y-1.754 I-.349 J1.75 E.32297 G1 X49.943 Y-1.783 E.00903 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X50 Y-1.789 G1 X50.349 Y-1.755 G1 X50.685 Y-1.653 G1 X50.994 Y-1.487 G1 X51.265 Y-1.265 G1 X51.487 Y-.994 G1 X51.577 Y-.827 ;WIPE_END G1 X50.077 Y.81 Z35.6 F30000 G1 Z35.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.46132 G1 F1200 G1 X50.81 Y.077 E.03534 SET_VELOCITY_LIMIT ACCEL=10000 G1 X50.704 Y-.409 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F1200 G1 X49.591 Y.704 E.05367 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.295 Y.409 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F1200 G1 X50.409 Y-.705 E.05367 SET_VELOCITY_LIMIT ACCEL=10000 G1 X49.923 Y-.81 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F1200 G1 X49.19 Y-.077 E.03533 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X49.923 Y-.81 ;WIPE_END M106 S0 M106 P2 S0 ;TYPE:Custom ; filament end gcode G1 E-3 F3600 G0 X50 Y50 F30000 M104 S0 ; turn off temperature M73 P100 R0 ; EXECUTABLE_BLOCK_END