; HEADER_BLOCK_START ; generated by Flash Studio 1.7.9 on 2026-09-30 at 06:42:16 ; total layer number: 528 ; filament_density: 1.24 ; filament_diameter: 1.75 ; max_z_height: 105.60 ; filament: 1 ; HEADER_BLOCK_END ; filament used [mm] = 14306.02 ; filament used [cm3] = 34.41 ; filament used [g] = 42.67 ; filament cost = 0.85 ; total filament used [g] = 42.67 ; total filament cost = 0.85 ; total layers count = 528 ; estimated printing time (normal mode) = 1h 49m 42s ; estimated first layer printing time (normal mode) = 15s ; CONFIG_BLOCK_START ; accel_to_decel_enable = 0 ; accel_to_decel_factor = 50% ; activate_air_filtration = 0 ; activate_chamber_temp_control = 0 ; adaptive_bed_mesh_margin = 0 ; adaptive_pressure_advance = 0 ; adaptive_pressure_advance_bridges = 0 ; adaptive_pressure_advance_model = "0,0,0\n0,0,0" ; adaptive_pressure_advance_overhangs = 0 ; additional_cooling_fan_speed = 100 ; align_infill_direction_to_model = 0 ; alternate_extra_wall = 0 ; auxiliary_fan = 1 ; bbl_calib_mark_logo = 1 ; bbl_use_printhost = 0 ; bed_custom_model = ; bed_custom_texture = ; bed_exclude_area = 0x0 ; bed_mesh_max = 99999,99999 ; bed_mesh_min = -99999,-99999 ; bed_mesh_probe_distance = 50,50 ; bed_temperature_formula = by_highest_temp ; before_layer_change_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z] ; best_object_pos = 0.5,0.5 ; bottom_shell_layers = 4 ; bottom_shell_thickness = 0 ; bottom_solid_infill_flow_ratio = 1 ; bottom_surface_density = 100% ; bottom_surface_pattern = monotonic ; bridge_acceleration = 50% ; bridge_angle = 0 ; bridge_density = 100% ; bridge_flow = 1 ; bridge_no_support = 0 ; bridge_speed = 25 ; brim_ears_detection_length = 1 ; brim_ears_max_angle = 125 ; brim_object_gap = 0.1 ; brim_type = outer_only ; brim_use_efc_outline = 0 ; brim_width = 5 ; calib_flowrate_topinfill_special_order = 0 ; chamber_temperature = 0 ; change_extrusion_role_gcode = ; change_filament_gcode = ; close_fan_the_first_x_layers = 1 ; compatible_printers_condition = ; complete_print_exhaust_fan_speed = 80 ; cool_plate_temp = 60 ; cool_plate_temp_initial_layer = 55 ; cooling_tube_length = 0 ; cooling_tube_retraction = 0 ; counterbore_hole_bridging = none ; curr_bed_type = Textured PEI Plate ; default_acceleration = 10000 ; default_filament_colour = "" ; default_filament_profile = "Flashforge Generic PLA" ; default_jerk = 0 ; default_junction_deviation = 0 ; default_print_profile = 0.20mm Standard @Flashforge AD5M 0.4 Nozzle ; deretraction_speed = 30 ; detect_narrow_internal_solid_infill = 1 ; detect_overhang_wall = 1 ; detect_thin_wall = 0 ; different_settings_to_system = bottom_shell_layers;brim_type;brim_width;enable_support;initial_layer_print_height;layer_height;sparse_infill_density;sparse_infill_pattern;top_shell_layers;wall_loops;xy_hole_compensation;; ; disable_m73 = 0 ; dont_filter_internal_bridges = disabled ; dont_slow_down_outer_wall = 0 ; draft_shield = disabled ; during_print_exhaust_fan_speed = 60 ; elefant_foot_compensation = 0.15 ; elefant_foot_compensation_layers = 1 ; emit_machine_limits_to_gcode = 1 ; enable_arc_fitting = 1 ; enable_extra_bridge_layer = disabled ; enable_filament_ramming = 0 ; enable_long_retraction_when_cut = 0 ; enable_overhang_bridge_fan = 1 ; enable_overhang_speed = 1 ; enable_power_loss_recovery = printer_configuration ; enable_pressure_advance = 1 ; enable_prime_tower = 0 ; enable_support = 0 ; enable_tower_interface_cooldown_during_tower = 0 ; enable_tower_interface_features = 0 ; enable_wrapping_detection = 0 ; enforce_support_layers = 0 ; eng_plate_temp = 60 ; eng_plate_temp_initial_layer = 55 ; ensure_vertical_shell_thickness = ensure_all ; exclude_object = 0 ; extra_loading_move = 0 ; extra_perimeters_on_overhangs = 0 ; extra_solid_infills = ; extruder_ams_count = ; extruder_clearance_height_to_lid = 150 ; extruder_clearance_height_to_rod = 27 ; extruder_clearance_radius = 76 ; extruder_colour = #F2754E ; extruder_offset = 0x0 ; extruder_printable_area = ; extruder_printable_height = 0 ; extruder_type = Direct Drive ; extrusion_rate_smoothing_external_perimeter_only = 0 ; fan_cooling_layer_time = 100 ; fan_kickstart = 0 ; fan_max_speed = 100 ; fan_min_speed = 100 ; fan_speedup_overhangs = 1 ; fan_speedup_time = 0 ; filament_adaptive_volumetric_speed = 0 ; filament_adhesiveness_category = 0 ; filament_change_length = 0 ; filament_colour = #F2754E ; filament_cooling_final_speed = 3.4 ; filament_cooling_initial_speed = 2.2 ; filament_cooling_moves = 4 ; filament_cost = 20 ; filament_density = 1.24 ; filament_diameter = 1.75 ; filament_end_gcode = "; filament end gcode\n" ; filament_extruder_variant = "Direct Drive Standard" ; filament_flow_ratio = 0.98 ; filament_flush_temp = 0 ; filament_flush_volumetric_speed = 0 ; filament_ids = GFL99 ; filament_is_support = 0 ; filament_loading_speed = 28 ; filament_loading_speed_start = 3 ; filament_map = 1 ; filament_map_mode = Auto For Flush ; filament_max_volumetric_speed = 25 ; filament_minimal_purge_on_wipe_tower = 15 ; filament_multitool_ramming = 0 ; filament_multitool_ramming_flow = 10 ; filament_multitool_ramming_volume = 10 ; filament_notes = "" ; filament_printable = 3 ; filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" ; filament_self_index = 1 ; filament_settings_id = "Flashforge Generic PLA" ; filament_shrink = 100% ; filament_shrinkage_compensation_z = 100% ; filament_soluble = 0 ; filament_stamping_distance = 0 ; filament_stamping_loading_speed = 0 ; filament_start_gcode = "; filament start gcode\n;right_extruder_material: PLA\n" ; filament_toolchange_delay = 0 ; filament_tower_interface_pre_extrusion_dist = 10 ; filament_tower_interface_pre_extrusion_length = 0 ; filament_tower_interface_print_temp = -1 ; filament_tower_interface_purge_volume = 20 ; filament_tower_ironing_area = 4 ; filament_type = PLA ; filament_unloading_speed = 90 ; filament_unloading_speed_start = 100 ; filament_vendor = Flashforge ; file_start_gcode = ; filename_format = {input_filename_base}.gcode ; fill_multiline = 1 ; filter_out_gap_fill = 0.5 ; first_layer_flow_ratio = 1 ; first_layer_print_sequence = 0 ; flush_into_infill = 0 ; flush_into_objects = 0 ; flush_into_support = 1 ; flush_multiplier = 0.3 ; flush_volumes_matrix = 0,280,280,280,280,0,280,280,280,280,0,280,280,280,280,0 ; flush_volumes_vector = 140,140,140,140,140,140,140,140 ; full_fan_speed_layer = 0 ; fuzzy_skin = disabled_fuzzy ; fuzzy_skin_first_layer = 0 ; fuzzy_skin_mode = displacement ; fuzzy_skin_noise_type = classic ; fuzzy_skin_octaves = 4 ; fuzzy_skin_persistence = 0.5 ; fuzzy_skin_point_distance = 0.3 ; fuzzy_skin_scale = 1 ; fuzzy_skin_thickness = 0.2 ; gap_fill_flow_ratio = 1 ; gap_fill_target = nowhere ; gap_infill_speed = 200 ; gcode_add_line_number = 0 ; gcode_comments = 0 ; gcode_flavor = klipper ; gcode_label_objects = 0 ; grab_length = 0 ; has_scarf_joint_seam = 0 ; head_wrap_detect_zone = ; high_current_on_filament_swap = 0 ; hole_to_polyhole = 0 ; hole_to_polyhole_threshold = 0.01 ; hole_to_polyhole_twisted = 1 ; host_type = octoprint ; hot_plate_temp = 50 ; hot_plate_temp_initial_layer = 55 ; idle_temperature = 0 ; independent_support_layer_height = 1 ; infill_anchor = 400% ; infill_anchor_max = 20 ; infill_combination = 0 ; infill_combination_max_layer_height = 100% ; infill_direction = 45 ; infill_jerk = 9 ; infill_lock_depth = 1 ; infill_overhang_angle = 60 ; infill_shift_step = 0.4 ; infill_wall_overlap = 50% ; inherits_group = ;; ; initial_layer_acceleration = 500 ; initial_layer_infill_speed = 80 ; initial_layer_jerk = 9 ; initial_layer_line_width = 0.5 ; initial_layer_min_bead_width = 85% ; initial_layer_print_height = 0.2 ; initial_layer_speed = 50 ; initial_layer_travel_speed = 100% ; inner_wall_acceleration = 5000 ; inner_wall_flow_ratio = 1 ; inner_wall_jerk = 9 ; inner_wall_line_width = 0.45 ; inner_wall_speed = 300 ; interface_shells = 0 ; interlocking_beam = 0 ; interlocking_beam_layer_count = 2 ; interlocking_beam_width = 0.8 ; interlocking_boundary_avoidance = 2 ; interlocking_depth = 2 ; interlocking_orientation = 22.5 ; internal_bridge_angle = 0 ; internal_bridge_density = 100% ; internal_bridge_fan_speed = -1 ; internal_bridge_flow = 1 ; internal_bridge_speed = 50 ; internal_solid_infill_acceleration = 7000 ; internal_solid_infill_flow_ratio = 1 ; internal_solid_infill_line_width = 0.42 ; internal_solid_infill_pattern = monotonic ; internal_solid_infill_speed = 250 ; ironing_angle = 0 ; ironing_angle_fixed = 0 ; ironing_fan_speed = -1 ; ironing_flow = 15% ; ironing_inset = 0 ; ironing_pattern = rectilinear ; ironing_spacing = 0.1 ; ironing_speed = 15 ; ironing_type = no ironing ; is_infill_first = 0 ; lateral_lattice_angle_1 = -45 ; lateral_lattice_angle_2 = 45 ; layer_change_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] ; layer_height = 0.2 ; line_width = 0.42 ; long_retractions_when_cut = 0 ; long_retractions_when_ec = 0 ; machine_end_gcode = G1 E-3 F3600\nG0 X50 Y50 F30000\nM104 S0 ; turn off temperature ; machine_load_filament_time = 0 ; machine_max_acceleration_e = 5000,5000 ; machine_max_acceleration_extruding = 20000,20000 ; machine_max_acceleration_retracting = 5000,5000 ; machine_max_acceleration_travel = 20000,20000 ; machine_max_acceleration_x = 20000,20000 ; machine_max_acceleration_y = 20000,20000 ; machine_max_acceleration_z = 500,500 ; machine_max_jerk_e = 2.5,2.5 ; machine_max_jerk_x = 9,9 ; machine_max_jerk_y = 9,9 ; machine_max_jerk_z = 3,3 ; machine_max_junction_deviation = 0.01 ; machine_max_speed_e = 30,30 ; machine_max_speed_x = 600,600 ; machine_max_speed_y = 600,600 ; machine_max_speed_z = 20,20 ; machine_min_extruding_rate = 0,0 ; machine_min_travel_rate = 0,0 ; machine_pause_gcode = PAUSE ; machine_start_gcode = M190 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nG90\nM83\nG1 Z5 F6000\nG1 E-0.2 F800\nG1 X110 Y-110 F6000\nG1 E2 F800\nG1 Y-110 X55 Z0.25 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG1 Y-110 X55 Z0.45 F4800\nG1 X-55 E8 F2400\nG1 Y-109.6 F2400\nG1 X55 E5 F2400\nG92 E0 ; machine_tool_change_time = 0 ; machine_unload_filament_time = 0 ; make_overhang_printable = 0 ; make_overhang_printable_angle = 55 ; make_overhang_printable_hole_size = 0 ; manual_filament_change = 0 ; master_extruder_id = 1 ; max_bridge_length = 10 ; max_layer_height = 0.28 ; max_resonance_avoidance_speed = 120 ; max_travel_detour_distance = 0 ; max_volumetric_extrusion_rate_slope = 0 ; max_volumetric_extrusion_rate_slope_segment_length = 3 ; min_bead_width = 85% ; min_feature_size = 25% ; min_layer_height = 0.08 ; min_length_factor = 0.5 ; min_resonance_avoidance_speed = 70 ; min_skirt_length = 0 ; min_width_top_surface = 300% ; minimum_sparse_infill_area = 15 ; mmu_segmented_region_interlocking_depth = 0 ; mmu_segmented_region_max_width = 0 ; notes = ; nozzle_diameter = 0.4 ; nozzle_flush_dataset = 0 ; nozzle_height = 2.5 ; nozzle_hrc = 0 ; nozzle_temperature = 220 ; nozzle_temperature_initial_layer = 220 ; nozzle_temperature_range_high = 230 ; nozzle_temperature_range_low = 190 ; nozzle_type = stainless_steel ; nozzle_volume = 0 ; nozzle_volume_type = Standard ; only_one_wall_first_layer = 0 ; only_one_wall_top = 0 ; ooze_prevention = 0 ; other_layers_print_sequence = 0 ; other_layers_print_sequence_nums = 0 ; outer_wall_acceleration = 5000 ; outer_wall_flow_ratio = 1 ; outer_wall_jerk = 9 ; outer_wall_line_width = 0.42 ; outer_wall_speed = 200 ; overhang_1_4_speed = 0 ; overhang_2_4_speed = 40 ; overhang_3_4_speed = 20 ; overhang_4_4_speed = 10 ; overhang_fan_speed = 100 ; overhang_fan_threshold = 50% ; overhang_flow_ratio = 1 ; overhang_reverse = 0 ; overhang_reverse_internal_only = 0 ; overhang_reverse_threshold = 50% ; parking_pos_retraction = 0 ; pellet_modded_printer = 0 ; physical_extruder_map = 0 ; post_process = ; precise_outer_wall = 1 ; precise_z_height = 0 ; preferred_orientation = 0 ; preheat_steps = 1 ; preheat_time = 30 ; pressure_advance = 0.025 ; prime_tower_brim_width = 3 ; prime_tower_enable_framework = 0 ; prime_tower_flat_ironing = 0 ; prime_tower_infill_gap = 150% ; prime_tower_skip_points = 1 ; prime_tower_width = 60 ; prime_volume = 45 ; print_compatible_printers = "Flashforge Adventurer 5M 0.4 Nozzle" ; print_extruder_id = 1 ; print_extruder_variant = "Direct Drive Standard" ; print_flow_ratio = 1 ; print_order = default ; print_sequence = by layer ; print_settings_id = 0.20mm Standard @Flashforge AD5M 0.4 Nozzle ; printable_area = -110x-110,110x-110,110x110,-110x110 ; printable_height = 220 ; printer_extruder_id = 1 ; printer_extruder_variant = "Direct Drive Standard" ; printer_model = Flashforge Adventurer 5M ; printer_notes = ; printer_settings_id = Flashforge Adventurer 5M 0.4 Nozzle ; printer_structure = undefine ; printer_technology = FFF ; printer_variant = 0.4 ; printhost_authorization_type = key ; printhost_ssl_ignore_revoke = 0 ; printing_by_object_gcode = ; purge_in_prime_tower = 1 ; raft_contact_distance = 0.1 ; raft_expansion = 1.5 ; raft_first_layer_density = 90% ; raft_first_layer_expansion = 2 ; raft_layers = 0 ; reduce_crossing_wall = 0 ; reduce_fan_stop_start_freq = 1 ; reduce_infill_retraction = 1 ; required_nozzle_HRC = 0 ; resolution = 0.012 ; resonance_avoidance = 0 ; retract_before_wipe = 100% ; retract_length_toolchange = 2 ; retract_lift_above = 0 ; retract_lift_below = 0 ; retract_lift_enforce = All Surfaces ; retract_restart_extra = 0 ; retract_restart_extra_toolchange = 0 ; retract_when_changing_layer = 1 ; retraction_distances_when_cut = 18 ; retraction_distances_when_ec = 10 ; retraction_length = 0.8 ; retraction_minimum_travel = 1 ; retraction_speed = 30 ; role_based_wipe_speed = 1 ; scan_first_layer = 0 ; scarf_angle_threshold = 155 ; scarf_joint_flow_ratio = 1 ; scarf_joint_speed = 100% ; scarf_overhang_threshold = 40% ; seam_gap = 10% ; seam_position = aligned ; seam_slope_conditional = 0 ; seam_slope_entire_loop = 0 ; seam_slope_inner_walls = 0 ; seam_slope_min_length = 20 ; seam_slope_start_height = 0 ; seam_slope_steps = 10 ; seam_slope_type = none ; set_other_flow_ratios = 0 ; silent_mode = 0 ; single_extruder_multi_material = 0 ; single_extruder_multi_material_priming = 0 ; single_loop_draft_shield = 0 ; skeleton_infill_density = 25% ; skeleton_infill_line_width = 100% ; skin_infill_density = 25% ; skin_infill_depth = 2 ; skin_infill_line_width = 100% ; skirt_distance = 2 ; skirt_height = 1 ; skirt_loops = 0 ; skirt_speed = 50 ; skirt_start_angle = -135 ; skirt_type = combined ; slice_closing_radius = 0.049 ; slicing_mode = regular ; slow_down_for_layer_cooling = 1 ; slow_down_layer_time = 6 ; slow_down_layers = 1 ; slow_down_min_speed = 20 ; slowdown_for_curled_perimeters = 1 ; small_area_infill_flow_compensation = 0 ; small_area_infill_flow_compensation_model = 0,0;"\n0.2,0.4444";"\n0.4,0.6145";"\n0.6,0.7059";"\n0.8,0.7619";"\n1.5,0.8571";"\n2,0.8889";"\n3,0.9231";"\n5,0.9520";"\n10,1" ; small_perimeter_speed = 50% ; small_perimeter_threshold = 0 ; solid_infill_direction = 45 ; solid_infill_filament = 1 ; solid_infill_rotate_template = ; sparse_infill_acceleration = 100% ; sparse_infill_density = 20% ; sparse_infill_filament = 1 ; sparse_infill_flow_ratio = 1 ; sparse_infill_line_width = 0.45 ; sparse_infill_pattern = gyroid ; sparse_infill_rotate_template = ; sparse_infill_speed = 270 ; spiral_finishing_flow_ratio = 0 ; spiral_mode = 0 ; spiral_mode_max_xy_smoothing = 200% ; spiral_mode_smooth = 0 ; spiral_starting_flow_ratio = 0 ; staggered_inner_seams = 0 ; standby_temperature_delta = -5 ; start_end_points = 30x-3,54x245 ; supertack_plate_temp = 35 ; supertack_plate_temp_initial_layer = 35 ; support_air_filtration = 1 ; support_angle = 0 ; support_base_pattern = rectilinear ; support_base_pattern_spacing = 2.5 ; support_bottom_interface_spacing = 0.5 ; support_bottom_z_distance = 0.18 ; support_chamber_temp_control = 1 ; support_critical_regions_only = 0 ; support_expansion = 0 ; support_filament = 0 ; support_flow_ratio = 1 ; support_interface_bottom_layers = 2 ; support_interface_filament = 0 ; support_interface_flow_ratio = 1 ; support_interface_loop_pattern = 0 ; support_interface_not_for_body = 1 ; support_interface_pattern = auto ; support_interface_spacing = 0.5 ; support_interface_speed = 80 ; support_interface_top_layers = 2 ; support_ironing = 0 ; support_ironing_flow = 10% ; support_ironing_pattern = rectilinear ; support_ironing_spacing = 0.1 ; support_line_width = 0.42 ; support_material_interface_fan_speed = 100 ; support_multi_bed_types = 1 ; support_object_first_layer_gap = 0.2 ; support_object_skip_flush = 0 ; support_object_xy_distance = 0.3 ; support_on_build_plate_only = 0 ; support_remove_small_overhang = 1 ; support_speed = 150 ; support_style = default ; support_threshold_angle = 30 ; support_threshold_overlap = 50% ; support_top_z_distance = 0.18 ; support_type = normal(auto) ; symmetric_infill_y_axis = 0 ; temperature_vitrification = 60 ; template_custom_gcode = ; textured_cool_plate_temp = 40 ; textured_cool_plate_temp_initial_layer = 40 ; textured_plate_temp = 60 ; textured_plate_temp_initial_layer = 55 ; thick_bridges = 0 ; thick_internal_bridges = 1 ; thumbnails = 140x110/PNG ; thumbnails_format = PNG ; time_cost = 0 ; time_lapse_gcode = ; timelapse_type = 0 ; top_bottom_infill_wall_overlap = 25% ; top_shell_layers = 5 ; top_shell_thickness = 1 ; top_solid_infill_flow_ratio = 1 ; top_surface_acceleration = 2000 ; top_surface_density = 100% ; top_surface_jerk = 9 ; top_surface_line_width = 0.42 ; top_surface_pattern = monotonicline ; top_surface_speed = 200 ; travel_acceleration = 10000 ; travel_jerk = 12 ; travel_slope = 3 ; travel_speed = 500 ; travel_speed_z = 0 ; tree_support_angle_slow = 25 ; tree_support_auto_brim = 1 ; tree_support_branch_angle = 45 ; tree_support_branch_angle_organic = 40 ; tree_support_branch_diameter = 5 ; tree_support_branch_diameter_angle = 5 ; tree_support_branch_diameter_organic = 2 ; tree_support_branch_distance = 5 ; tree_support_branch_distance_organic = 1 ; tree_support_brim_width = 3 ; tree_support_tip_diameter = 0.8 ; tree_support_top_rate = 30% ; tree_support_wall_count = 0 ; upward_compatible_machine = ; use_firmware_retraction = 0 ; use_relative_e_distances = 1 ; volumetric_speed_coefficients = "" ; wall_direction = auto ; wall_distribution_count = 1 ; wall_filament = 1 ; wall_generator = classic ; wall_loops = 3 ; wall_sequence = inner wall/outer wall ; wall_transition_angle = 10 ; wall_transition_filter_deviation = 25% ; wall_transition_length = 100% ; wipe = 1 ; wipe_before_external_loop = 0 ; wipe_distance = 2 ; wipe_on_loops = 0 ; wipe_speed = 200 ; wipe_tower_bridging = 10 ; wipe_tower_cone_angle = 30 ; wipe_tower_extra_flow = 100% ; wipe_tower_extra_rib_length = 0 ; wipe_tower_extra_spacing = 100% ; wipe_tower_filament = 0 ; wipe_tower_fillet_wall = 1 ; wipe_tower_max_purge_speed = 90 ; wipe_tower_no_sparse_layers = 0 ; wipe_tower_rib_width = 8 ; wipe_tower_rotation_angle = 0 ; wipe_tower_type = type1 ; wipe_tower_wall_type = rectangle ; wipe_tower_x = 15.000 ; wipe_tower_x = 15 ; wipe_tower_y = 220.000 ; wipe_tower_y = 220 ; wiping_volumes_extruders = 70,70,70,70,70,70,70,70,70,70 ; wrapping_detection_gcode = ; wrapping_detection_layers = 20 ; wrapping_exclude_area = ; xy_contour_compensation = 0 ; xy_hole_compensation = 0 ; z_hop = 0.4 ; z_hop_types = Auto Lift ; z_offset = 0 ; first_layer_bed_temperature = 55 ; bed_shape = -110x-110,110x-110,110x110,-110x110 ; first_layer_temperature = 220 ; first_layer_height = 0.200 ; CONFIG_BLOCK_END ; external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; external perimeters extrusion width = 0.42mm ; perimeters extrusion width = 0.45mm ; infill extrusion width = 0.45mm ; solid infill extrusion width = 0.42mm ; top infill extrusion width = 0.42mm ; first layer extrusion width = 0.50mm ; EXECUTABLE_BLOCK_START M73 P0 R109 M106 S0 M106 P2 S0 ;TYPE:Custom M190 S55 M104 S220 G90 M83 G1 Z5 F6000 G1 E-0.2 F800 G1 X110 Y-110 F6000 G1 E2 F800 G1 Y-110 X55 Z0.25 F4800 G1 X-55 E8 F2400 G1 Y-109.6 F2400 G1 X55 E5 F2400 G1 Y-110 X55 Z0.45 F4800 G1 X-55 E8 F2400 G1 Y-109.6 F2400 G1 X55 E5 F2400 G92 E0 G90 G21 M83 ; use relative distances for extrusion ; filament start gcode ;right_extruder_material: PLA SET_PRESSURE_ADVANCE ADVANCE=0.025; Override pressure advance value M106 S0 M106 P2 S0 ;LAYER_CHANGE ;Z:0.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.2 G1 E-.8 F1800 ;AFTER_LAYER_CHANGE ;0.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=500 G1 X-8.508 Y0 F30000 G1 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Brim ;WIDTH:0.5 G1 F3000 G1 X-8.508 Y50.992 E1.89924 G1 X-8.556 Y51.64 E.02422 G1 X-8.696 Y52.263 E.02377 G1 X-9.053 Y53.106 E.03411 G1 X-9.45 Y53.724 E.02737 G1 X-9.876 Y54.203 E.02386 G1 X-10.369 Y54.614 E.0239 G1 X-10.914 Y54.947 E.02378 G1 X-11.752 Y55.273 E.0335 G1 X-12.379 Y55.404 E.02386 G1 X-12.958 Y55.442 E.02159 G1 X-91.942 Y55.442 E2.94185 G1 X-92.59 Y55.394 E.02422 G1 X-93.213 Y55.254 E.02377 G1 X-94.056 Y54.897 E.03411 G1 X-94.674 Y54.5 E.02737 G1 X-95.153 Y54.074 E.02386 G1 X-95.564 Y53.581 E.0239 G1 X-95.897 Y53.036 E.02378 G1 X-96.223 Y52.198 E.0335 G1 X-96.354 Y51.571 E.02386 G1 X-96.392 Y50.992 E.02159 G1 X-96.392 Y-12.992 E2.38316 G1 X-96.344 Y-13.64 E.02422 G1 X-96.204 Y-14.261 E.02373 G1 X-95.801 Y-15.189 E.03766 G1 X-95.451 Y-15.724 E.02381 G1 X-95.024 Y-16.203 E.0239 G1 X-94.531 Y-16.614 E.0239 G1 X-93.986 Y-16.947 E.0238 G1 X-93.2 Y-17.258 E.03148 G1 X-92.52 Y-17.404 E.02589 G1 X-91.942 Y-17.442 E.02157 G1 X-90.121 Y-17.442 E.06785 G1 X-89.98 Y-17.491 E.00555 G1 X-89.892 Y-17.671 E.00745 G1 X-89.892 Y-25.992 E.30992 G1 X-89.844 Y-26.64 E.02422 G1 X-89.704 Y-27.263 E.02377 G1 X-89.347 Y-28.106 E.03411 G1 X-88.95 Y-28.724 E.02737 G1 X-88.524 Y-29.203 E.02386 G1 X-88.031 Y-29.614 E.0239 G1 X-87.486 Y-29.947 E.02378 G1 X-86.648 Y-30.273 E.0335 G1 X-86.021 Y-30.404 E.02386 G1 X-85.442 Y-30.442 E.02159 G1 X-19.458 Y-30.442 E2.45765 G1 X-18.81 Y-30.394 E.02422 G1 X-18.187 Y-30.254 E.02377 G1 X-17.344 Y-29.897 E.03411 G1 X-16.726 Y-29.5 E.02737 G1 X-16.247 Y-29.074 E.02386 G1 X-15.836 Y-28.581 E.0239 G1 X-15.503 Y-28.036 E.0238 G1 X-15.192 Y-27.25 E.03148 G1 X-15.046 Y-26.57 E.02589 G1 X-15.008 Y-25.992 E.02157 G1 X-15.008 Y-17.671 E.30995 G1 X-14.959 Y-17.53 E.00555 G1 X-14.779 Y-17.442 E.00745 G1 X-12.958 Y-17.442 E.06782 G1 X-12.31 Y-17.394 E.02422 G1 X-11.689 Y-17.254 E.02373 G1 X-10.761 Y-16.851 E.03766 G1 X-10.226 Y-16.501 E.02381 G1 X-9.747 Y-16.074 E.0239 G1 X-9.336 Y-15.581 E.0239 G1 X-9.003 Y-15.036 E.0238 G1 X-8.692 Y-14.25 E.03148 G1 X-8.546 Y-13.57 E.02589 G1 X-8.508 Y-12.992 E.02157 G1 X-8.508 Y-.04 E.48243 G1 X-8.965 Y-.04 F30000 G1 F3000 G1 X-8.965 Y50.97 E1.89991 G1 X-9.008 Y51.562 E.02214 G1 X-9.138 Y52.133 E.02181 G1 X-9.465 Y52.902 E.03111 G1 X-9.81 Y53.438 E.02375 G1 X-10.188 Y53.866 E.02128 G1 X-10.644 Y54.247 E.02213 G1 X-11.128 Y54.54 E.02108 G1 X-11.894 Y54.836 E.03055 G1 X-12.432 Y54.948 E.02048 G1 X-12.977 Y54.985 E.02036 G1 X-91.92 Y54.985 E2.9403 G1 X-92.512 Y54.942 E.02214 G1 X-93.083 Y54.812 E.02181 G1 X-93.852 Y54.485 E.03111 G1 X-94.388 Y54.14 E.02375 G1 X-94.816 Y53.762 E.02128 G1 X-95.197 Y53.306 E.02213 G1 X-95.49 Y52.822 E.02108 G1 X-95.786 Y52.056 E.03055 G1 X-95.898 Y51.518 E.02048 G1 X-95.935 Y50.973 E.02036 G1 X-95.935 Y-12.97 E2.38161 G1 X-95.892 Y-13.562 E.02214 G1 X-95.762 Y-14.131 E.02171 G1 X-95.402 Y-14.96 E.03369 G1 X-95.092 Y-15.437 E.02116 G1 X-94.697 Y-15.88 E.02213 G1 X-94.272 Y-16.235 E.02062 G1 X-93.791 Y-16.53 E.02102 G1 X-93.077 Y-16.815 E.02862 G1 X-92.447 Y-16.951 E.02403 G1 X-91.923 Y-16.985 E.01956 G1 X-90.132 Y-16.985 E.06669 G1 X-89.961 Y-17.014 E.00647 G1 X-89.844 Y-17.054 E.0046 G1 X-89.671 Y-17.157 E.00749 G1 X-89.563 Y-17.302 E.00674 G1 X-89.488 Y-17.457 E.00639 G1 X-89.435 Y-17.686 E.00878 G1 X-89.435 Y-25.97 E.30852 G1 X-89.392 Y-26.562 E.02214 G1 X-89.262 Y-27.133 E.02181 G1 X-88.945 Y-27.881 E.03025 G1 X-88.59 Y-28.438 E.02461 G1 X-88.212 Y-28.866 E.02128 G1 X-87.756 Y-29.247 E.02213 G1 X-87.272 Y-29.54 E.02108 G1 X-86.506 Y-29.836 E.03055 G1 X-85.968 Y-29.948 E.02048 G1 X-85.423 Y-29.985 E.02036 G1 X-19.47 Y-29.985 E2.45648 G1 X-18.868 Y-29.939 E.02251 G1 X-18.317 Y-29.812 E.02106 G1 X-17.569 Y-29.495 E.03025 G1 X-17.012 Y-29.14 E.02461 G1 X-16.584 Y-28.762 E.02128 G1 X-16.203 Y-28.306 E.02213 G1 X-15.909 Y-27.82 E.02114 G1 X-15.635 Y-27.127 E.02775 G1 X-15.502 Y-26.517 E.02329 G1 X-15.465 Y-25.973 E.0203 G1 X-15.465 Y-17.682 E.30879 G1 X-15.396 Y-17.394 E.01103 G1 X-15.293 Y-17.221 E.00749 G1 X-15.148 Y-17.113 E.00674 G1 X-14.993 Y-17.038 E.00639 G1 X-14.764 Y-16.985 E.00878 G1 X-12.98 Y-16.985 E.06642 G1 X-12.368 Y-16.939 E.02289 G1 X-11.819 Y-16.812 E.02096 G1 X-10.969 Y-16.441 E.03455 G1 X-10.497 Y-16.13 E.02105 G1 X-10.084 Y-15.762 E.02062 G1 X-9.703 Y-15.306 E.02213 G1 X-9.409 Y-14.82 E.02114 G1 X-9.135 Y-14.127 E.02775 G1 X-8.999 Y-13.497 E.02403 G1 X-8.965 Y-12.973 E.01956 G1 X-8.965 Y-.08 E.48021 G1 X-9.422 Y-.08 F30000 G1 F3000 G1 X-9.422 Y50.948 E1.90059 G1 X-9.461 Y51.484 E.02004 G1 X-9.579 Y52.003 E.01983 G1 X-9.877 Y52.697 E.02811 G1 X-10.17 Y53.153 E.02018 G1 X-10.501 Y53.53 E.01868 G1 X-10.902 Y53.867 E.01954 G1 X-11.342 Y54.132 E.01912 G1 X-12.035 Y54.398 E.02764 G1 X-12.504 Y54.495 E.01785 G1 X-12.997 Y54.528 E.01842 G1 X-91.898 Y54.528 E2.93874 G1 X-92.434 Y54.489 E.02004 G1 X-92.953 Y54.371 E.01983 G1 X-93.647 Y54.073 E.02811 G1 X-94.103 Y53.78 E.02018 G1 X-94.48 Y53.449 E.01868 G1 X-94.817 Y53.048 E.01954 G1 X-95.082 Y52.608 E.01912 G1 X-95.348 Y51.915 E.02764 G1 X-95.445 Y51.446 E.01785 G1 X-95.478 Y50.953 E.01842 G1 X-95.478 Y-12.948 E2.38005 G1 X-95.439 Y-13.484 E.02003 G1 X-95.321 Y-13.999 E.01968 G1 X-95.002 Y-14.733 E.02978 G1 X-94.734 Y-15.15 E.01848 G1 X-94.371 Y-15.558 E.02033 G1 X-93.996 Y-15.868 E.01811 G1 X-93.596 Y-16.114 E.01752 G1 X-92.954 Y-16.372 E.02574 G1 X-92.373 Y-16.498 E.02214 G1 X-91.903 Y-16.528 E.01754 G1 X-90.142 Y-16.528 E.06562 G1 X-89.892 Y-16.562 E.00938 G1 X-89.704 Y-16.62 E.00734 G1 X-89.447 Y-16.759 E.01089 G1 X-89.299 Y-16.893 E.00744 G1 X-89.15 Y-17.109 E.00976 G1 X-89.041 Y-17.363 E.0103 G1 X-88.978 Y-17.699 E.01273 G1 X-88.978 Y-25.948 E.30723 G1 X-88.939 Y-26.484 E.02004 G1 X-88.821 Y-27.004 E.01984 G1 X-88.544 Y-27.657 E.02643 G1 X-88.23 Y-28.153 E.02186 G1 X-87.899 Y-28.53 E.01866 G1 X-87.498 Y-28.867 E.01954 G1 X-87.058 Y-29.132 E.01912 G1 X-86.365 Y-29.398 E.02764 G1 X-85.896 Y-29.495 E.01785 G1 X-85.403 Y-29.528 E.01842 G1 X-19.493 Y-29.528 E2.45488 G1 X-18.947 Y-29.486 E.0204 G1 X-18.447 Y-29.371 E.01911 G1 X-17.793 Y-29.094 E.02646 G1 X-17.297 Y-28.78 E.02186 G1 X-16.906 Y-28.435 E.01943 G1 X-16.571 Y-28.031 E.01955 G1 X-16.316 Y-27.606 E.01845 G1 X-16.071 Y-26.983 E.02492 G1 X-15.958 Y-26.462 E.01986 G1 X-15.922 Y-25.953 E.01902 G1 X-15.922 Y-17.696 E.30753 G1 X-15.842 Y-17.295 E.01521 G1 X-15.783 Y-17.151 E.0058 G1 X-15.692 Y-16.999 E.0066 G1 X-15.557 Y-16.849 E.00754 G1 X-15.341 Y-16.7 E.00976 G1 X-15.084 Y-16.59 E.01041 G1 X-14.874 Y-16.542 E.00804 G1 X-14.756 Y-16.528 E.00442 G1 X-13.003 Y-16.528 E.06529 G1 X-12.447 Y-16.486 E.02077 G1 X-11.952 Y-16.371 E.01893 G1 X-11.179 Y-16.031 E.03147 G1 X-10.785 Y-15.772 E.01756 G1 X-10.421 Y-15.45 E.01811 G1 X-10.071 Y-15.031 E.02033 G1 X-9.816 Y-14.606 E.01845 G1 X-9.578 Y-14.005 E.02407 G1 X-9.452 Y-13.423 E.02216 G1 X-9.422 Y-12.953 E.01754 G1 X-9.422 Y-.12 E.47799 G1 X-9.879 Y-.12 F30000 G1 F3000 G1 X-9.879 Y50.926 E1.90128 G1 X-9.917 Y51.427 E.01869 G1 X-10.021 Y51.873 E.01706 G1 X-10.288 Y52.491 E.02511 G1 X-10.53 Y52.868 E.01668 G1 X-10.814 Y53.194 E.0161 G1 X-11.161 Y53.487 E.01691 G1 X-11.555 Y53.724 E.01712 G1 X-12.174 Y53.96 E.0247 G1 X-12.575 Y54.042 E.01522 G1 X-13.017 Y54.071 E.01651 G1 X-91.876 Y54.071 E2.93719 G1 X-92.377 Y54.033 E.01869 G1 X-92.823 Y53.929 E.01706 G1 X-93.441 Y53.662 E.02511 G1 X-93.818 Y53.42 E.01668 G1 X-94.144 Y53.136 E.0161 G1 X-94.437 Y52.789 E.01691 G1 X-94.674 Y52.395 E.01712 G1 X-94.91 Y51.776 E.0247 G1 X-94.992 Y51.375 E.01522 G1 X-95.021 Y50.933 E.01651 G1 X-95.021 Y-12.926 E2.3785 G1 X-94.986 Y-13.406 E.01791 G1 X-94.88 Y-13.868 E.01765 G1 X-94.602 Y-14.506 E.02593 G1 X-94.374 Y-14.864 E.01579 G1 X-94.044 Y-15.235 E.0185 G1 X-93.737 Y-15.489 E.01486 G1 X-93.399 Y-15.698 E.0148 G1 X-92.831 Y-15.929 E.02285 G1 X-92.3 Y-16.044 E.02024 G1 X-91.884 Y-16.071 E.01551 G1 X-90.151 Y-16.071 E.06454 G1 X-89.752 Y-16.128 E.01504 G1 X-89.477 Y-16.223 E.01081 G1 X-89.133 Y-16.428 E.01491 G1 X-88.917 Y-16.642 E.01136 G1 X-88.726 Y-16.938 E.01311 G1 X-88.59 Y-17.29 E.01405 G1 X-88.521 Y-17.71 E.01587 G1 X-88.521 Y-25.926 E.30601 G1 X-88.486 Y-26.406 E.01792 G1 X-88.379 Y-26.874 E.01787 G1 X-88.142 Y-27.434 E.02266 G1 X-87.869 Y-27.87 E.01914 G1 X-87.586 Y-28.194 E.01604 G1 X-87.239 Y-28.487 E.01691 G1 X-86.845 Y-28.724 E.01712 G1 X-86.226 Y-28.96 E.0247 G1 X-85.825 Y-29.042 E.01522 G1 X-85.383 Y-29.071 E.01651 G1 X-19.516 Y-29.071 E2.4533 G1 X-19.026 Y-29.034 E.01827 G1 X-18.578 Y-28.93 E.01716 G1 X-18.016 Y-28.692 E.02272 G1 X-17.581 Y-28.419 E.01911 G1 X-17.228 Y-28.107 E.01754 G1 X-16.939 Y-27.757 E.01692 G1 X-16.723 Y-27.393 E.01577 G1 X-16.508 Y-26.839 E.02212 G1 X-16.411 Y-26.387 E.01723 G1 X-16.379 Y-25.932 E.017 G1 X-16.379 Y-17.709 E.30625 G1 X-16.261 Y-17.113 E.02265 G1 X-16.091 Y-16.774 E.01411 G1 X-15.9 Y-16.547 E.01106 G1 X-15.812 Y-16.47 E.00436 G1 X-15.511 Y-16.276 E.01332 G1 X-15.177 Y-16.143 E.01338 G1 X-14.749 Y-16.071 E.01616 G1 X-13.025 Y-16.071 E.06422 G1 X-12.527 Y-16.034 E.01863 G1 X-12.085 Y-15.931 E.01689 G1 X-11.388 Y-15.622 E.02839 G1 X-11.056 Y-15.402 E.01485 G1 X-10.757 Y-15.137 E.01486 G1 X-10.439 Y-14.756 E.0185 G1 X-10.223 Y-14.392 E.01575 G1 X-10.021 Y-13.882 E.02044 G1 X-9.906 Y-13.35 E.02029 G1 X-9.879 Y-12.934 E.01551 G1 X-9.879 Y-.16 E.47579 G1 X-10.336 Y-.16 F30000 G1 F3000 G1 X-10.336 Y50.904 E1.90193 G1 X-10.369 Y51.347 E.01654 M73 P0 R108 G1 X-10.461 Y51.74 E.01505 G1 X-10.699 Y52.285 E.02215 G1 X-10.891 Y52.585 E.01325 G1 X-11.129 Y52.86 E.01354 G1 X-11.437 Y53.12 E.01504 G1 X-11.767 Y53.316 E.01427 G1 X-12.313 Y53.522 E.02174 G1 X-12.645 Y53.588 E.01261 G1 X-13.037 Y53.614 E.01463 G1 X-91.854 Y53.614 E2.93562 G1 X-92.297 Y53.581 E.01654 G1 X-92.69 Y53.489 E.01505 G1 X-93.235 Y53.251 E.02215 G1 X-93.535 Y53.059 E.01325 G1 X-93.81 Y52.821 E.01354 G1 X-94.07 Y52.513 E.01504 G1 X-94.266 Y52.183 E.01427 G1 X-94.472 Y51.637 E.02174 G1 X-94.538 Y51.305 E.01261 G1 X-94.564 Y50.913 E.01463 G1 X-94.564 Y-12.905 E2.37697 G1 X-94.534 Y-13.327 E.01576 G1 X-94.439 Y-13.735 E.01562 G1 X-94.202 Y-14.281 E.02215 G1 X-94.014 Y-14.578 E.01308 G1 X-93.718 Y-14.912 E.01663 G1 X-93.477 Y-15.111 E.01164 G1 X-93.201 Y-15.283 E.0121 G1 X-92.706 Y-15.486 E.01994 G1 X-92.226 Y-15.591 E.01831 G1 X-91.865 Y-15.614 E.01347 G1 X-90.161 Y-15.614 E.06345 G1 X-89.592 Y-15.7 E.02146 G1 X-89.233 Y-15.836 E.01428 G1 X-88.807 Y-16.108 E.01882 G1 X-88.527 Y-16.404 E.01518 G1 X-88.296 Y-16.783 E.01655 G1 X-88.137 Y-17.227 E.01755 G1 X-88.064 Y-17.72 E.01858 G1 X-88.064 Y-25.905 E.30484 G1 X-88.034 Y-26.328 E.01579 G1 X-87.938 Y-26.744 E.0159 G1 X-87.74 Y-27.212 E.01895 G1 X-87.506 Y-27.587 E.01645 G1 X-87.271 Y-27.86 E.01342 G1 X-86.963 Y-28.12 E.01504 G1 X-86.633 Y-28.316 E.01427 G1 X-86.087 Y-28.522 E.02174 G1 X-85.755 Y-28.588 E.01261 G1 X-85.363 Y-28.614 E.01463 G1 X-19.538 Y-28.614 E2.45173 G1 X-19.106 Y-28.582 E.01613 G1 X-18.709 Y-28.489 E.0152 G1 X-18.238 Y-28.29 E.01904 G1 X-17.865 Y-28.058 E.01634 G1 X-17.566 Y-27.796 E.01481 G1 X-17.309 Y-27.484 E.01506 G1 X-17.132 Y-27.181 E.01308 G1 X-16.945 Y-26.697 E.01934 G1 X-16.864 Y-26.313 E.01461 G1 X-16.836 Y-25.911 E.01501 G1 X-16.836 Y-17.722 E.30502 G1 X-16.71 Y-17.032 E.02612 G1 X-16.665 Y-16.899 E.00522 G1 X-16.505 Y-16.581 E.01326 G1 X-16.254 Y-16.259 E.0152 G1 X-16.052 Y-16.081 E.01003 G1 X-15.67 Y-15.847 E.01671 G1 X-15.36 Y-15.723 E.01242 G1 X-14.738 Y-15.614 E.02353 G1 X-13.047 Y-15.614 E.06295 G1 X-12.607 Y-15.581 E.01646 G1 X-12.219 Y-15.49 E.01483 G1 X-11.619 Y-15.224 E.02444 G1 X-11.343 Y-15.043 E.0123 G1 X-11.094 Y-14.825 E.01235 G1 X-10.808 Y-14.482 E.01663 G1 X-10.631 Y-14.18 E.01303 G1 X-10.464 Y-13.759 E.01687 G1 X-10.359 Y-13.276 E.01841 G1 X-10.336 Y-12.915 E.01347 G1 X-10.336 Y-.2 E.47359 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-10.336 Y1.8 ;WIPE_END G1 X-12.874 Y-5.398 Z.6 F30000 G1 X-16.488 Y-15.646 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-16.577 Y-15.614 E.00349 G1 X-16.699 Y-15.614 E.00456 G1 X-16.803 Y-15.662 E.00426 G1 X-16.836 Y-15.751 E.00355 G1 X-16.836 Y-15.868 E.00437 G1 X-16.788 Y-15.972 E.00426 G1 X-16.678 Y-16.004 E.00426 G1 X-16.599 Y-15.962 E.00334 G1 X-16.486 Y-15.854 E.00583 G1 X-16.439 Y-15.749 E.00426 G1 X-16.471 Y-15.682 E.00277 G1 X-16.471 Y-15.157 F30000 G1 F3000 G1 X-12.982 Y-15.157 E.12996 G1 X-12.595 Y-15.113 E.01451 G1 X-12.225 Y-15.01 E.01429 G1 X-11.829 Y-14.814 E.01649 G1 X-11.463 Y-14.524 E.01736 G1 X-11.27 Y-14.318 E.01055 G1 X-11.101 Y-14.068 E.01122 G1 X-10.941 Y-13.74 E.01359 G1 X-10.889 Y-13.571 E.00659 G1 X-10.8 Y-13.045 E.01986 G1 X-10.793 Y50.966 E2.38419 G1 X-10.861 Y51.459 E.01852 G1 X-11.033 Y51.943 E.01914 G1 X-11.209 Y52.227 E.01244 G1 X-11.433 Y52.497 E.01307 G1 X-11.572 Y52.632 E.00722 G1 X-11.905 Y52.863 E.0151 G1 X-12.229 Y53.016 E.01331 G1 X-12.597 Y53.116 E.01422 G1 X-12.985 Y53.157 E.01452 G1 X-91.916 Y53.157 E2.93991 G1 X-92.409 Y53.089 E.01852 G1 X-92.893 Y52.917 E.01914 G1 X-93.177 Y52.741 E.01244 G1 X-93.447 Y52.517 E.01307 G1 X-93.582 Y52.378 E.00722 G1 X-93.813 Y52.045 E.0151 G1 X-93.966 Y51.721 E.01332 G1 X-94.066 Y51.353 E.01422 G1 X-94.107 Y50.965 E.01453 G1 X-94.075 Y-13.28 E2.39289 G1 X-94.004 Y-13.605 E.01241 G1 X-93.913 Y-13.854 E.00986 G1 X-93.812 Y-14.04 E.00788 G1 X-93.473 Y-14.495 E.02113 G1 X-93.262 Y-14.684 E.01055 G1 X-92.993 Y-14.864 E.01204 G1 X-92.751 Y-14.985 E.0101 G1 X-92.436 Y-15.089 E.01236 G1 X-92.143 Y-15.132 E.01101 G1 X-87.742 Y-15.152 E.16392 G1 X-87.638 Y-15.2 E.00426 G1 X-87.606 Y-15.289 E.00352 G1 X-87.575 Y-26.279 E.40936 G1 X-87.499 Y-26.617 E.0129 G1 X-87.349 Y-26.983 E.01472 G1 X-87.198 Y-27.218 E.01042 G1 X-86.968 Y-27.495 E.01343 G1 X-86.828 Y-27.631 E.00727 G1 X-86.495 Y-27.863 E.01511 G1 X-86.171 Y-28.016 E.01331 G1 X-85.803 Y-28.116 E.01422 G1 X-85.415 Y-28.157 E.01452 G1 X-19.491 Y-28.157 E2.45544 G1 X-19.046 Y-28.101 E.01671 G1 X-18.577 Y-27.951 E.01835 G1 X-18.23 Y-27.746 E.01499 G1 X-17.955 Y-27.518 E.01333 G1 X-17.819 Y-27.378 E.00727 G1 X-17.587 Y-27.045 E.01511 G1 X-17.434 Y-26.721 E.01331 G1 X-17.334 Y-26.353 E.01422 G1 X-17.293 Y-25.965 E.01452 G1 X-17.293 Y-15.294 E.39747 G1 X-17.245 Y-15.19 E.00426 G1 X-17.156 Y-15.157 E.00355 G1 X-16.511 Y-15.157 E.02401 G1 X-16.511 Y-14.7 F30000 G1 F3000 G1 X-12.974 Y-14.7 E.13174 G1 X-12.642 Y-14.658 E.01247 G1 X-12.349 Y-14.571 E.01139 G1 X-12.118 Y-14.46 E.00953 G1 X-11.739 Y-14.16 E.01803 G1 X-11.647 Y-14.06 E.00503 G1 X-11.512 Y-13.869 E.00872 G1 X-11.376 Y-13.599 E.01126 G1 X-11.339 Y-13.492 E.0042 G1 X-11.257 Y-13.057 E.01651 G1 X-11.25 Y50.976 E2.38497 G1 X-11.291 Y51.306 E.01241 G1 X-11.421 Y51.702 E.01549 G1 X-11.554 Y51.927 E.00975 G1 X-11.789 Y52.21 E.0137 G1 X-11.888 Y52.302 E.00503 G1 X-12.167 Y52.488 E.01249 G1 X-12.423 Y52.602 E.01042 G1 X-12.64 Y52.661 E.0084 G1 X-12.977 Y52.7 E.01264 G1 X-91.926 Y52.7 E2.94053 G1 X-92.256 Y52.659 E.01241 G1 X-92.652 Y52.529 E.01549 G1 X-92.877 Y52.396 E.00975 G1 X-93.16 Y52.161 E.0137 G1 X-93.252 Y52.062 E.00503 G1 X-93.438 Y51.783 E.01249 G1 X-93.552 Y51.527 E.01042 G1 X-93.611 Y51.31 E.0084 G1 X-93.65 Y50.973 E.01264 G1 X-93.63 Y-13.175 E2.38925 G1 X-93.574 Y-13.45 E.01047 G1 X-93.507 Y-13.643 E.00758 G1 X-93.444 Y-13.769 E.00524 G1 X-93.168 Y-14.155 E.01771 G1 X-93.016 Y-14.299 E.00778 G1 X-92.732 Y-14.489 E.01273 G1 X-92.551 Y-14.574 E.00745 G1 X-92.29 Y-14.655 E.01016 G1 X-92.151 Y-14.675 E.00523 G1 X-87.286 Y-14.697 E.18121 G1 X-87.182 Y-14.745 E.00426 G1 X-87.149 Y-14.834 E.00352 G1 X-87.13 Y-26.175 E.42242 G1 X-87.074 Y-26.448 E.0104 G1 X-86.966 Y-26.734 E.01139 G1 X-86.851 Y-26.92 E.00812 G1 X-86.611 Y-27.209 E.01401 G1 X-86.512 Y-27.302 E.00506 G1 X-86.233 Y-27.488 E.01249 G1 X-85.977 Y-27.602 E.01042 G1 X-85.76 Y-27.661 E.0084 G1 X-85.423 Y-27.7 E.01264 G1 X-19.482 Y-27.7 E2.45603 G1 X-19.096 Y-27.647 E.0145 G1 X-18.714 Y-27.515 E.01507 G1 X-18.53 Y-27.401 E.00805 G1 X-18.241 Y-27.161 E.01401 G1 X-18.148 Y-27.062 E.00506 G1 X-17.962 Y-26.783 E.01249 G1 X-17.848 Y-26.527 E.01042 G1 X-17.789 Y-26.31 E.0084 G1 X-17.75 Y-25.973 E.01264 G1 X-17.75 Y-14.837 E.41476 G1 X-17.702 Y-14.733 E.00426 G1 X-17.613 Y-14.7 E.00355 G1 X-16.551 Y-14.7 E.03955 G1 X-16.551 Y-14.243 F30000 G1 F3000 G1 X-12.966 Y-14.243 E.13355 G1 X-12.784 Y-14.224 E.00679 G1 X-12.47 Y-14.13 E.01222 G1 X-12.324 Y-14.052 E.00617 G1 X-12.026 Y-13.804 E.01445 G1 X-11.879 Y-13.597 E.00943 G1 X-11.787 Y-13.4 E.0081 G1 X-11.714 Y-13.07 E.0126 G1 X-11.707 Y50.984 E2.38576 G1 X-11.726 Y51.166 E.00679 M73 P1 R108 G1 X-11.82 Y51.48 E.01222 G1 X-11.898 Y51.626 E.00617 G1 X-12.146 Y51.924 E.01445 G1 X-12.353 Y52.071 E.00943 G1 X-12.55 Y52.163 E.0081 G1 X-12.692 Y52.206 E.00551 G1 X-12.969 Y52.243 E.01044 G1 X-91.934 Y52.243 E2.94114 G1 X-92.116 Y52.224 E.00679 G1 X-92.43 Y52.13 E.01222 G1 X-92.576 Y52.052 E.00617 G1 X-92.874 Y51.804 E.01445 G1 X-93.021 Y51.597 E.00943 G1 X-93.113 Y51.4 E.00811 G1 X-93.156 Y51.258 E.00551 G1 X-93.193 Y50.981 E.01044 G1 X-93.183 Y-13.082 E2.38609 G1 X-93.144 Y-13.293 E.00799 G1 X-93.072 Y-13.503 E.00826 G1 X-92.847 Y-13.831 E.01483 G1 X-92.758 Y-13.921 E.00471 G1 X-92.547 Y-14.071 E.00964 G1 X-92.348 Y-14.164 E.00819 G1 X-92.158 Y-14.218 E.00734 G1 X-86.829 Y-14.242 E.19849 G1 X-86.725 Y-14.29 E.00426 G1 X-86.693 Y-14.379 E.00353 G1 X-86.683 Y-26.082 E.4359 G1 X-86.644 Y-26.293 E.008 G1 X-86.572 Y-26.503 E.00826 G1 X-86.506 Y-26.621 E.00504 G1 X-86.254 Y-26.925 E.0147 G1 X-86.047 Y-27.071 E.00943 G1 X-85.85 Y-27.163 E.00811 G1 X-85.708 Y-27.206 E.00551 G1 X-85.431 Y-27.243 E.01044 G1 X-19.473 Y-27.243 E2.45667 G1 X-19.155 Y-27.194 E.01198 G1 X-18.947 Y-27.122 E.00819 G1 X-18.829 Y-27.056 E.00504 G1 X-18.525 Y-26.804 E.0147 G1 X-18.379 Y-26.597 E.00943 G1 X-18.287 Y-26.4 E.0081 G1 X-18.244 Y-26.258 E.00551 G1 X-18.207 Y-25.981 E.01044 G1 X-18.207 Y-14.38 E.43208 G1 X-18.16 Y-14.276 E.00426 G1 X-18.07 Y-14.243 E.00355 G1 X-16.591 Y-14.243 E.05508 G1 X-16.591 Y-13.786 F30000 G1 F3000 G1 X-12.959 Y-13.786 E.1353 G1 X-12.832 Y-13.77 E.00475 G1 X-12.607 Y-13.694 E.00884 G1 X-12.389 Y-13.527 E.01023 G1 X-12.298 Y-13.414 E.00541 G1 X-12.196 Y-13.197 E.00892 G1 X-12.164 Y-12.989 E.00782 G1 X-12.164 Y50.991 E2.38304 G1 X-12.18 Y51.118 E.00475 G1 X-12.256 Y51.343 E.00884 G1 X-12.423 Y51.561 E.01023 G1 X-12.536 Y51.652 E.00541 G1 X-12.753 Y51.754 E.00892 G1 X-12.961 Y51.786 E.00782 G1 X-91.941 Y51.786 E2.94173 G1 X-92.068 Y51.77 E.00475 G1 X-92.293 Y51.694 E.00884 G1 X-92.511 Y51.527 E.01023 G1 X-92.602 Y51.414 E.00541 G1 X-92.704 Y51.197 E.00892 G1 X-92.736 Y50.989 E.00781 G1 X-92.736 Y-12.988 E2.3829 G1 X-92.693 Y-13.221 E.00884 G1 X-92.646 Y-13.34 E.00475 G1 X-92.477 Y-13.561 E.01037 G1 X-92.364 Y-13.652 E.00541 G1 X-92.144 Y-13.755 E.00906 G1 X-92.057 Y-13.773 E.0033 G1 X-86.372 Y-13.786 E.21172 G1 X-86.269 Y-13.834 E.00426 G1 X-86.236 Y-13.923 E.00354 G1 X-86.236 Y-25.988 E.44937 G1 X-86.193 Y-26.221 E.00884 G1 X-86.146 Y-26.34 E.00475 G1 X-85.977 Y-26.561 E.01037 G1 X-85.864 Y-26.652 E.00541 G1 X-85.647 Y-26.754 E.00892 G1 X-85.439 Y-26.786 E.00781 G1 X-19.462 Y-26.786 E2.45739 G1 X-19.229 Y-26.743 E.00884 G1 X-19.11 Y-26.696 E.00475 G1 X-18.889 Y-26.527 E.01037 G1 X-18.798 Y-26.414 E.00541 G1 X-18.696 Y-26.197 E.00892 G1 X-18.664 Y-25.989 E.00782 G1 X-18.664 Y-13.923 E.44944 G1 X-18.617 Y-13.819 E.00426 G1 X-18.527 Y-13.786 E.00355 G1 X-16.631 Y-13.786 E.07062 G1 X-16.631 Y-13.329 F30000 G1 F3000 G1 X-12.95 Y-13.329 E.13711 G1 X-12.839 Y-13.3 E.00426 G1 X-12.755 Y-13.253 E.00361 G1 X-12.646 Y-13.116 E.00652 G1 X-12.621 Y-13 E.00442 G1 X-12.621 Y51 E2.38376 G1 X-12.65 Y51.111 E.00426 G1 X-12.697 Y51.195 E.00361 G1 X-12.834 Y51.304 E.00652 G1 X-12.95 Y51.329 E.00442 G1 X-91.95 Y51.329 E2.94245 G1 X-92.061 Y51.3 E.00426 G1 X-92.145 Y51.253 E.00361 G1 X-92.254 Y51.116 E.00652 G1 X-92.279 Y51 E.00442 G1 X-92.279 Y-13 E2.38376 G1 X-92.25 Y-13.111 E.00426 G1 X-92.203 Y-13.195 E.00361 G1 X-92.066 Y-13.304 E.00652 G1 X-91.95 Y-13.329 E.00442 G1 X-85.779 Y-13.329 E.22986 G1 X-85.779 Y-26 E.47196 G1 X-85.75 Y-26.111 E.00426 G1 X-85.703 Y-26.195 E.00361 G1 X-85.566 Y-26.304 E.00652 G1 X-85.45 Y-26.329 E.00442 G1 X-19.45 Y-26.329 E2.45825 G1 X-19.339 Y-26.3 E.00426 G1 X-19.255 Y-26.253 E.00361 G1 X-19.146 Y-26.116 E.00652 G1 X-19.121 Y-26 E.00442 G1 X-19.121 Y-13.329 E.47196 G1 X-16.671 Y-13.329 E.09126 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-14.671 Y-13.329 ;WIPE_END G1 X-22.3 Y-13.58 Z.6 F30000 G1 X-88.062 Y-15.744 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-88.11 Y-15.64 E.00426 G1 X-88.198 Y-15.607 E.00352 G1 X-88.333 Y-15.606 E.00504 G1 X-88.438 Y-15.654 E.00426 G1 X-88.47 Y-15.763 E.00426 G1 X-88.434 Y-15.838 E.00307 G1 X-88.298 Y-15.981 E.00736 G1 X-88.192 Y-16.024 E.00426 G1 X-88.09 Y-15.971 E.00426 G1 X-88.061 Y-15.887 E.00334 G1 X-88.061 Y-15.784 E.00383 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-88.11 Y-15.64 G1 X-88.198 Y-15.607 G1 X-88.333 Y-15.606 G1 X-88.438 Y-15.653 G1 X-88.47 Y-15.763 G1 X-88.434 Y-15.838 G1 X-88.298 Y-15.981 G1 X-88.192 Y-16.024 G1 X-88.09 Y-15.971 G1 X-88.061 Y-15.887 G1 X-88.061 Y-15.784 ;WIPE_END G1 X-80.437 Y-15.428 Z.6 F30000 G1 X-19.85 Y-12.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-13.35 Y-12.6 E.2421 G1 X-13.35 Y50.6 E2.35396 G2 X-15.969 Y50.627 I-.876 J42.584 E.09757 G2 X-16.967 Y50.75 I1.689 J17.778 E.03746 G1 X-18.933 Y50.75 E.07321 G2 X-21.449 Y50.6 I-2.072 J13.574 E.09404 G1 X-83.951 Y50.6 E2.32794 G2 X-85.967 Y50.75 I-.162 J11.472 E.0754 G1 X-87.933 Y50.75 E.07321 G2 X-89.949 Y50.6 I-1.854 J11.318 E.0754 G1 X-91.55 Y50.6 E.05963 G1 X-91.55 Y-12.6 E2.35396 G1 X-85.05 Y-12.6 E.2421 G1 X-85.05 Y-25.6 E.4842 G1 X-19.85 Y-25.6 E2.42845 G1 X-19.85 Y-12.64 E.48271 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-17.85 Y-12.628 ;WIPE_END G1 X-25.481 Y-12.487 Z.6 F30000 G1 X-90.855 Y-11.283 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Inner wall G1 F3000 G1 X-91.05 Y-11.342 E.00758 G1 X-91.05 Y-12.1 E.02823 G1 X-90.292 Y-12.1 E.02823 G1 X-90.233 Y-11.905 E.00758 G2 X-90.834 Y-11.317 I.996 J1.618 E.0316 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-91.05 Y-11.342 G1 X-91.05 Y-12.1 G1 X-90.292 Y-12.1 G1 X-90.233 Y-11.905 G1 X-90.285 Y-11.87 ;WIPE_END G1 X-89.869 Y-8.453 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-90.044 Y-8.574 E.00792 G3 X-89.416 Y-11.739 I1.094 J-1.428 E.14915 G1 X-89.185 Y-11.785 E.00877 G3 X-89.834 Y-8.435 I.235 J1.784 E.25366 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-90.044 Y-8.574 G1 X-90.223 Y-8.727 G1 X-90.379 Y-8.904 G1 X-90.51 Y-9.1 G1 X-90.614 Y-9.311 G1 X-90.689 Y-9.534 G1 X-90.732 Y-9.749 G1 X-90.751 Y-9.998 G1 X-90.744 Y-10.099 ;WIPE_END G1 X-90.452 Y-2.472 Z.6 F30000 G1 X-88.439 Y49.925 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-88.44 Y49.912 E.0005 G3 X-88.614 Y48.311 I1.303 J-.952 E.06281 G3 X-87.185 Y47.215 I1.67 J.697 E.07021 G3 X-85.318 Y49.699 I.253 J1.753 E.14119 G3 X-85.602 Y50.08 I-1.184 J-.586 E.01781 G1 X-86.125 Y50.429 E.02342 G3 X-87.775 Y50.43 I-.825 J-1.429 E.06435 G1 X-88.287 Y50.092 E.02285 G1 X-88.412 Y49.955 E.00693 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-88.44 Y49.912 G1 X-88.582 Y49.701 G1 X-88.678 Y49.476 G1 X-88.731 Y49.239 G1 X-88.75 Y49.002 G1 X-88.735 Y48.766 G1 X-88.689 Y48.534 G1 X-88.614 Y48.311 G1 X-88.51 Y48.1 G1 X-88.495 Y48.078 ;WIPE_END G1 X-80.866 Y48.279 Z.6 F30000 G1 X-19.463 Y49.894 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-19.574 Y49.694 E.00851 G3 X-19.614 Y48.311 I1.438 J-.734 E.05327 G3 X-18.185 Y47.215 I1.664 J.689 E.07024 G3 X-16.316 Y49.697 I.253 J1.754 E.14112 G3 X-16.612 Y50.091 I-1.216 J-.605 E.01846 G1 X-17.125 Y50.43 E.02289 G3 X-18.775 Y50.43 I-.825 J-1.429 E.06432 G1 X-19.288 Y50.091 E.02289 G3 X-19.434 Y49.92 I1.152 J-1.131 E.00841 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-19.574 Y49.694 G1 X-19.677 Y49.476 G1 X-19.727 Y49.255 G1 X-19.75 Y49.004 G1 X-19.735 Y48.766 G1 X-19.689 Y48.534 G1 X-19.614 Y48.311 G1 X-19.51 Y48.1 G1 X-19.472 Y48.043 ;WIPE_END G1 X-18.862 Y40.435 Z.6 F30000 G1 X-14.667 Y-11.905 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Inner wall G1 F3000 G1 X-14.608 Y-12.1 E.00758 G1 X-13.85 Y-12.1 E.02823 G1 X-13.85 Y-11.342 E.02823 G1 X-14.045 Y-11.283 E.00758 G2 X-14.633 Y-11.884 I-1.618 J.995 E.0316 G1 X-15.462 Y-11.732 F30000 ;TYPE:Outer wall G1 F3000 G1 X-15.261 Y-11.663 E.00792 G3 X-16.416 Y-11.739 I-.689 J1.662 E.3771 G1 X-16.185 Y-11.785 E.00877 G3 X-15.501 Y-11.744 I.235 J1.784 E.0257 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-15.261 Y-11.663 G1 X-15.05 Y-11.56 G1 X-14.854 Y-11.429 G1 X-14.677 Y-11.273 G1 X-14.521 Y-11.096 G1 X-14.39 Y-10.9 G1 X-14.286 Y-10.689 G1 X-14.211 Y-10.466 G1 X-14.191 Y-10.37 ;WIPE_END G1 X-17.233 Y-11.905 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Inner wall G1 F3000 G2 X-14.045 Y-8.717 I1.28 J1.908 E.30215 G1 X-13.85 Y-8.658 E.00758 G1 X-13.85 Y50.1 E2.18852 G2 X-15.952 Y50.126 I-.623 J35.412 E.07832 M73 P1 R107 G1 X-15.74 Y49.611 E.02075 G2 X-20.155 Y49.63 I-2.21 J-.618 E.31587 G1 X-19.945 Y50.126 E.02006 G2 X-21.448 Y50.1 I-1.076 J19.055 E.05603 G1 X-83.953 Y50.1 E2.32805 G2 X-84.956 Y50.126 I-.147 J13.994 E.03737 G1 X-84.745 Y49.63 E.02007 G2 X-89.156 Y49.63 I-2.206 J-.636 E.31663 G1 X-88.944 Y50.126 E.02009 G2 X-91.05 Y50.1 I-1.483 J35.499 E.07847 G1 X-91.05 Y-8.658 E2.18852 G1 X-90.855 Y-8.717 E.00758 G2 X-87.667 Y-11.905 I1.908 J-1.28 E.30215 G1 X-87.608 Y-12.1 E.00758 G1 X-84.55 Y-12.1 E.1139 G1 X-84.55 Y-25.1 E.4842 G1 X-20.35 Y-25.1 E2.39121 G1 X-20.35 Y-12.1 E.4842 G1 X-17.292 Y-12.1 E.1139 G1 X-17.245 Y-11.944 E.00609 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-17.351 Y-11.826 G1 X-17.578 Y-11.628 G1 X-17.776 Y-11.401 G1 X-17.944 Y-11.151 G1 X-18.077 Y-10.881 G1 X-18.173 Y-10.596 G1 X-18.232 Y-10.3 G1 X-18.235 Y-10.266 ;WIPE_END G1 X-25.857 Y-9.87 Z.6 F30000 G1 X-88.85 Y-6.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-85.55 Y-6.6 E.12291 G1 X-85.55 Y-2.4 E.15643 G1 X-88.85 Y-2.4 E.12291 G1 X-88.85 Y-6.56 E.15494 G1 X-89.35 Y-6.6 F30000 ;TYPE:Inner wall G1 F3000 G1 X-89.35 Y-7.1 E.01862 G1 X-85.05 Y-7.1 E.16016 G1 X-85.05 Y-1.9 E.19368 G1 X-89.35 Y-1.9 E.16016 G1 X-89.35 Y-6.56 E.17357 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-89.35 Y-7.1 G1 X-87.89 Y-7.1 ;WIPE_END G1 X-80.274 Y-7.596 Z.6 F30000 G1 X-18.165 Y-11.643 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G2 X-17.542 Y-7.752 I2.221 J1.64 E.16344 G1 X-17.601 Y-7.557 E.00758 G1 X-20.307 Y-7.557 E.10077 G1 X-20.307 Y-1.443 E.22773 G1 X-15.093 Y-1.443 E.19421 G1 X-15.093 Y-7.383 E.22123 G2 X-14.307 Y-7.785 I-.907 J-2.736 E.03302 G1 X-14.307 Y49.643 E2.139 G2 X-15.279 Y49.646 I-.315 J62.334 E.03621 G2 X-20.62 Y49.646 I-2.67 J-.656 E.37113 G1 X-84.28 Y49.646 E2.37109 G2 X-89.621 Y49.646 I-2.67 J-.656 E.3711 G2 X-90.593 Y49.643 I-.657 J62.559 E.03621 G1 X-90.593 Y-7.785 E2.139 G2 X-89.807 Y-7.383 I1.692 J-2.333 E.03302 G1 X-89.807 Y-1.443 E.22123 G1 X-84.593 Y-1.443 E.19421 G1 X-84.593 Y-7.557 E.22773 G1 X-87.299 Y-7.557 E.10077 G1 X-87.358 Y-7.752 E.00758 G2 X-86.735 Y-11.643 I-1.599 J-2.251 E.16344 G1 X-84.093 Y-11.643 E.09842 G1 X-84.093 Y-24.643 E.4842 G1 X-20.807 Y-24.643 E2.35716 G1 X-20.807 Y-11.643 E.4842 G1 X-18.205 Y-11.643 E.09693 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-18.34 Y-11.38 G1 X-18.5 Y-11.056 G1 X-18.616 Y-10.714 G1 X-18.686 Y-10.36 G1 X-18.71 Y-9.994 G1 X-18.691 Y-9.741 ;WIPE_END G1 X-18.834 Y-2.11 Z.6 F30000 G1 X-19.35 Y25.4 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-19.35 Y20.6 E.17878 G1 X-16.05 Y20.6 E.12291 G1 X-16.05 Y25.4 E.17878 G1 X-19.31 Y25.4 E.12142 G1 X-19.85 Y25.4 F30000 ;TYPE:Inner wall G1 F3000 G1 X-19.85 Y20.1 E.1974 G1 X-15.55 Y20.1 E.16016 G1 X-15.55 Y25.9 E.21603 G1 X-19.85 Y25.9 E.16016 G1 X-19.85 Y25.44 E.01713 G1 X-20.307 Y25.4 F30000 G1 F3000 G1 X-20.307 Y19.643 E.21443 G1 X-15.093 Y19.643 E.19421 G1 X-15.093 Y26.357 E.25008 G1 X-20.307 Y26.357 E.19421 G1 X-20.307 Y25.44 E.03416 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-20.307 Y23.44 ;WIPE_END G1 X-27.933 Y23.124 Z.6 F30000 G1 X-88.85 Y20.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-85.55 Y20.6 E.12291 G1 X-85.55 Y25.4 E.17878 G1 X-88.85 Y25.4 E.12291 G1 X-88.85 Y20.64 E.17729 G1 X-89.35 Y20.6 F30000 ;TYPE:Inner wall G1 F3000 G1 X-89.35 Y20.1 E.01862 G1 X-85.05 Y20.1 E.16016 G1 X-85.05 Y25.9 E.21603 G1 X-89.35 Y25.9 E.16016 G1 X-89.35 Y20.64 E.19592 G1 X-89.807 Y20.6 F30000 G1 F3000 G1 X-89.807 Y19.643 E.03565 G1 X-84.593 Y19.643 E.19421 G1 X-84.593 Y26.357 E.25008 G1 X-89.807 Y26.357 E.19421 G1 X-89.807 Y20.64 E.21294 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-89.807 Y19.643 G1 X-88.804 Y19.643 ;WIPE_END G1 X-81.33 Y21.191 Z.6 F30000 G1 X-32.05 Y31.4 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-72.85 Y31.4 E1.51964 G1 X-72.85 Y8.6 E.84921 G1 X-32.05 Y8.6 E1.51964 G1 X-32.05 Y31.36 E.84772 M73 P2 R107 G1 X-31.55 Y31.4 F30000 ;TYPE:Inner wall G1 F3000 G1 X-31.55 Y31.9 E.01862 G1 X-73.35 Y31.9 E1.55689 G1 X-73.35 Y8.1 E.88646 G1 X-31.55 Y8.1 E1.55689 G1 X-31.55 Y31.36 E.86635 G1 X-31.093 Y31.4 F30000 G1 F3000 G1 X-31.093 Y32.357 E.03565 G1 X-73.807 Y32.357 E1.59094 G1 X-73.807 Y7.643 E.92051 G1 X-31.093 Y7.643 E1.59094 G1 X-31.093 Y31.36 E.88337 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-31.093 Y32.357 G1 X-32.096 Y32.357 ;WIPE_END G1 X-29.189 Y25.3 Z.6 F30000 G1 X-16.05 Y-6.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-16.05 Y-2.4 E.15643 G1 X-19.35 Y-2.4 E.12291 G1 X-19.35 Y-6.6 E.15643 G1 X-16.09 Y-6.6 E.12142 G1 X-16.05 Y-7.1 F30000 ;TYPE:Inner wall G1 F3000 G1 X-15.55 Y-7.1 E.01862 G1 X-15.55 Y-1.9 E.19368 G1 X-19.85 Y-1.9 E.16016 G1 X-19.85 Y-7.1 E.19368 G1 X-16.09 Y-7.1 E.14005 G1 X-16.296 Y-7.41 F30000 ;TYPE:Gap infill ;WIDTH:0.222953 G1 F3000 G1 X-16.462 Y-7.427 E.00244 ;WIDTH:0.257097 G1 X-16.643 Y-7.445 E.00317 ;WIDTH:0.294067 G1 X-16.753 Y-7.463 E.00229 ;WIDTH:0.330504 G1 X-16.863 Y-7.481 E.00262 ;WIDTH:0.377055 G3 X-17.357 Y-7.576 I1.19 J-7.548 E.01369 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-16.863 Y-7.481 ;WIPE_END G1 X-16.296 Y-7.41 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.195215 G1 F3000 G2 X-15.594 Y-7.412 I.338 J-7.306 E.00871 ;WIDTH:0.225899 G1 X-15.321 Y-7.438 E.00409 G1 X-14.7 Y-7.291 F30000 ;WIDTH:0.371684 G1 F3000 G1 X-14.7 Y-1.214 E.16279 G1 X-15.517 Y-1.306 F30000 ;TYPE:Bottom surface ;WIDTH:0.501088 G1 F4800 G1 X-14.65 Y-.439 E.04579 G1 X-14.65 Y.209 E.02419 G1 X-15.959 Y-1.1 E.06914 G1 X-16.607 Y-1.1 E.02419 G1 X-14.65 Y.857 E.10335 G1 X-14.65 Y1.505 E.02419 G1 X-17.255 Y-1.1 E.13756 G1 X-17.903 Y-1.1 E.02419 G1 X-14.65 Y2.153 E.17177 G1 X-14.65 Y2.801 E.02419 G1 X-18.551 Y-1.1 E.20599 G1 X-19.199 Y-1.1 E.02419 G1 X-14.65 Y3.449 E.2402 G1 X-14.65 Y4.097 E.02419 G1 X-20.053 Y-1.306 E.28527 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-18.639 Y.108 ;WIPE_END G1 X-18.668 Y-7.524 Z.6 F30000 G1 X-18.681 Y-10.949 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-19.032 Y-11.3 E.01853 G1 X-19.68 Y-11.3 E.02419 G1 X-18.987 Y-10.607 E.03659 G2 X-19.052 Y-10.024 I2.18 J.539 E.02196 G1 X-20.534 Y-11.506 E.07823 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-19.119 Y-10.092 ;WIPE_END G1 X-20.143 Y-17.655 Z.6 F30000 G1 X-20.944 Y-23.58 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-21.665 Y-24.3 E.03805 G1 X-22.313 Y-24.3 E.02419 G1 X-21.15 Y-23.137 E.0614 G1 X-21.15 Y-22.489 E.02419 G1 X-22.961 Y-24.3 E.09561 G1 X-23.609 Y-24.3 E.02419 G1 X-21.15 Y-21.841 E.12982 G1 X-21.15 Y-21.193 E.02419 G1 X-24.257 Y-24.3 E.16403 G1 X-24.905 Y-24.3 E.02419 G1 X-21.15 Y-20.545 E.19824 G1 X-21.15 Y-19.898 E.02419 G1 X-25.552 Y-24.3 E.23245 G1 X-26.2 Y-24.3 E.02419 G1 X-21.15 Y-19.25 E.26667 G1 X-21.15 Y-18.602 E.02419 G1 X-26.848 Y-24.3 E.30088 G1 X-27.496 Y-24.3 E.02419 G1 X-21.15 Y-17.954 E.33509 G1 X-21.15 Y-17.306 E.02419 G1 X-28.144 Y-24.3 E.3693 G1 X-28.792 Y-24.3 E.02419 G1 X-21.15 Y-16.658 E.40351 G1 X-21.15 Y-16.01 E.02419 G1 X-29.44 Y-24.3 E.43772 G1 X-30.088 Y-24.3 E.02419 G1 X-21.15 Y-15.362 E.47193 G1 X-21.15 Y-14.714 E.02419 G1 X-30.736 Y-24.3 E.50615 G1 X-31.384 Y-24.3 E.02419 G1 X-21.15 Y-14.066 E.54036 G1 X-21.15 Y-13.418 E.02419 G1 X-32.032 Y-24.3 E.57457 G1 X-32.68 Y-24.3 E.02419 G1 X-21.15 Y-12.77 E.60878 G1 X-21.15 Y-12.122 E.02419 G1 X-33.328 Y-24.3 E.64299 G1 X-33.976 Y-24.3 E.02419 G1 X-18.966 Y-9.291 E.79248 G2 X-18.254 Y-7.931 I3.047 J-.729 E.0579 G1 X-34.624 Y-24.3 E.86429 G1 X-35.272 Y-24.3 E.02419 G1 X-18.871 Y-7.9 E.86592 G1 X-19.519 Y-7.9 E.02419 G1 X-35.92 Y-24.3 E.86592 G1 X-36.568 Y-24.3 E.02419 G1 X-20.167 Y-7.9 E.86592 G1 X-20.65 Y-7.9 E.01801 G1 X-20.65 Y-7.734 E.00618 G1 X-37.216 Y-24.3 E.87466 G1 X-37.863 Y-24.3 E.02419 G1 X-20.65 Y-7.087 E.90887 G1 X-20.65 Y-6.439 E.02419 G1 X-38.511 Y-24.3 E.94308 G1 X-39.159 Y-24.3 E.02419 G1 X-20.65 Y-5.791 E.97729 G1 X-20.65 Y-5.143 E.02419 G1 X-39.807 Y-24.3 E1.0115 G1 X-40.455 Y-24.3 E.02419 G1 X-20.65 Y-4.495 E1.04571 G1 X-20.65 Y-3.847 E.02419 G1 X-41.103 Y-24.3 E1.07993 G1 X-41.751 Y-24.3 E.02419 G1 X-20.65 Y-3.199 E1.11414 G1 X-20.65 Y-2.551 E.02419 G1 X-42.399 Y-24.3 E1.14835 G1 X-43.047 Y-24.3 E.02419 G1 X-20.444 Y-1.697 E1.19342 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-21.858 Y-3.111 ;WIPE_END G1 X-16.692 Y2.507 Z.6 F30000 G1 X-14.444 Y4.951 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-43.695 Y-24.3 E1.54443 G1 X-44.343 Y-24.3 E.02419 G1 X-14.65 Y5.393 E1.56778 G1 X-14.65 Y6.041 E.02419 G1 X-44.991 Y-24.3 E1.60199 G1 X-45.639 Y-24.3 E.02419 G1 X-14.65 Y6.689 E1.6362 G1 X-14.65 Y7.337 E.02419 G1 X-46.287 Y-24.3 E1.67041 G1 X-46.935 Y-24.3 E.02419 G1 X-14.65 Y7.985 E1.70462 G1 X-14.65 Y8.633 E.02419 G1 X-47.583 Y-24.3 E1.73884 G1 X-48.231 Y-24.3 E.02419 G1 X-14.65 Y9.281 E1.77305 G1 X-14.65 Y9.929 E.02419 G1 X-48.879 Y-24.3 E1.80726 G1 X-49.527 Y-24.3 E.02419 M73 P2 R106 G1 X-14.65 Y10.577 E1.84147 G1 X-14.65 Y11.224 E.02419 G1 X-50.174 Y-24.3 E1.87568 G1 X-50.822 Y-24.3 E.02419 G1 X-14.65 Y11.872 E1.90989 G1 X-14.65 Y12.52 E.02419 G1 X-51.47 Y-24.3 E1.9441 G1 X-52.118 Y-24.3 E.02419 G1 X-14.65 Y13.168 E1.97832 G1 X-14.65 Y13.816 E.02419 G1 X-52.766 Y-24.3 E2.01253 G1 X-53.414 Y-24.3 E.02419 G1 X-14.65 Y14.464 E2.04674 G1 X-14.65 Y15.112 E.02419 G1 X-54.062 Y-24.3 E2.08095 G1 X-54.71 Y-24.3 E.02419 G1 X-14.65 Y15.76 E2.11516 G1 X-14.65 Y16.408 E.02419 G1 X-55.358 Y-24.3 E2.14937 G1 X-56.006 Y-24.3 E.02419 G1 X-14.65 Y17.056 E2.18358 G1 X-14.65 Y17.704 E.02419 G1 X-56.654 Y-24.3 E2.21779 G1 X-57.302 Y-24.3 E.02419 G1 X-14.65 Y18.352 E2.25201 G1 X-14.65 Y19 E.02419 G1 X-57.95 Y-24.3 E2.28622 G1 X-58.598 Y-24.3 E.02419 G1 X-15.226 Y19.072 E2.29 G1 X-15.229 Y19.3 E.00853 G1 X-15.646 Y19.3 E.01556 G1 X-59.246 Y-24.3 E2.30207 G1 X-59.894 Y-24.3 E.02419 G1 X-16.293 Y19.3 E2.30207 G1 X-16.941 Y19.3 E.02419 G1 X-60.542 Y-24.3 E2.30207 G1 X-61.19 Y-24.3 E.02419 G1 X-17.589 Y19.3 E2.30207 G1 X-18.237 Y19.3 E.02419 G1 X-61.838 Y-24.3 E2.30207 G1 X-62.485 Y-24.3 E.02419 G1 X-18.885 Y19.3 E2.30207 G1 X-19.533 Y19.3 E.02419 G1 X-30.75 Y8.083 E.59225 G1 X-30.75 Y8.731 E.02419 G1 X-20.181 Y19.3 E.55804 G1 X-20.65 Y19.3 E.0175 G1 X-20.65 Y19.479 E.00669 G1 X-30.75 Y9.379 E.53329 G1 X-30.75 Y10.027 E.02419 G1 X-20.65 Y20.127 E.53329 G1 X-20.65 Y20.775 E.02419 G1 X-30.75 Y10.675 E.53329 G1 X-30.75 Y11.323 E.02419 G1 X-20.65 Y21.423 E.53329 G1 X-20.65 Y22.071 E.02419 G1 X-30.75 Y11.971 E.53329 G1 X-30.75 Y12.619 E.02419 G1 X-20.65 Y22.719 E.53329 G1 X-20.65 Y23.367 E.02419 G1 X-30.75 Y13.267 E.53329 G1 X-30.75 Y13.915 E.02419 G1 X-20.65 Y24.015 E.53329 G1 X-20.65 Y24.663 E.02419 G1 X-30.75 Y14.563 E.53329 G1 X-30.75 Y15.211 E.02419 G1 X-20.65 Y25.311 E.53329 G1 X-20.65 Y25.959 E.02419 G1 X-30.956 Y15.653 E.54415 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-29.542 Y17.067 ;WIPE_END G1 X-30.943 Y9.564 Z.6 F30000 G1 X-31.328 Y7.506 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-63.133 Y-24.3 E1.67934 G1 X-63.781 Y-24.3 E.02419 G1 X-32.181 Y7.3 E1.66848 G1 X-32.829 Y7.3 E.02419 G1 X-64.429 Y-24.3 E1.66848 G1 X-65.077 Y-24.3 E.02419 G1 X-33.477 Y7.3 E1.66848 G1 X-34.125 Y7.3 E.02419 G1 X-65.725 Y-24.3 E1.66848 G1 X-66.373 Y-24.3 E.02419 G1 X-34.773 Y7.3 E1.66848 G1 X-35.421 Y7.3 E.02419 G1 X-67.021 Y-24.3 E1.66848 G1 X-67.669 Y-24.3 E.02419 G1 X-36.069 Y7.3 E1.66848 G1 X-36.717 Y7.3 E.02419 G1 X-68.317 Y-24.3 E1.66848 G1 X-68.965 Y-24.3 E.02419 G1 X-37.365 Y7.3 E1.66848 G1 X-38.013 Y7.3 E.02419 G1 X-69.613 Y-24.3 E1.66848 G1 X-70.261 Y-24.3 E.02419 G1 X-38.661 Y7.3 E1.66848 G1 X-39.309 Y7.3 E.02419 G1 X-70.909 Y-24.3 E1.66848 G1 X-71.557 Y-24.3 E.02419 G1 X-39.957 Y7.3 E1.66848 G1 X-40.604 Y7.3 E.02419 M73 P3 R106 G1 X-72.205 Y-24.3 E1.66848 G1 X-72.853 Y-24.3 E.02419 G1 X-41.252 Y7.3 E1.66848 G1 X-41.9 Y7.3 E.02419 G1 X-73.501 Y-24.3 E1.66848 G1 X-74.149 Y-24.3 E.02419 G1 X-42.548 Y7.3 E1.66848 G1 X-43.196 Y7.3 E.02419 G1 X-74.796 Y-24.3 E1.66848 G1 X-75.444 Y-24.3 E.02419 G1 X-43.844 Y7.3 E1.66848 G1 X-44.492 Y7.3 E.02419 G1 X-76.092 Y-24.3 E1.66848 G1 X-76.74 Y-24.3 E.02419 G1 X-45.14 Y7.3 E1.66848 G1 X-45.788 Y7.3 E.02419 G1 X-77.388 Y-24.3 E1.66848 G1 X-78.036 Y-24.3 E.02419 G1 X-46.436 Y7.3 E1.66848 G1 X-47.084 Y7.3 E.02419 G1 X-78.684 Y-24.3 E1.66848 G1 X-79.332 Y-24.3 E.02419 G1 X-47.732 Y7.3 E1.66848 G1 X-48.38 Y7.3 E.02419 G1 X-79.98 Y-24.3 E1.66848 G1 X-80.628 Y-24.3 E.02419 G1 X-49.028 Y7.3 E1.66848 G1 X-49.676 Y7.3 E.02419 G1 X-81.276 Y-24.3 E1.66848 G1 X-81.924 Y-24.3 E.02419 G1 X-50.324 Y7.3 E1.66848 G1 X-50.972 Y7.3 E.02419 G1 X-82.572 Y-24.3 E1.66848 G1 X-83.22 Y-24.3 E.02419 G1 X-51.62 Y7.3 E1.66848 G1 X-52.268 Y7.3 E.02419 G1 X-83.75 Y-24.182 E1.66226 G1 X-83.75 Y-23.535 E.02419 G1 X-52.915 Y7.3 E1.62805 G1 X-53.563 Y7.3 E.02419 G1 X-83.75 Y-22.887 E1.59384 G1 X-83.75 Y-22.239 E.02419 G1 X-54.211 Y7.3 E1.55963 G1 X-54.859 Y7.3 E.02419 G1 X-83.75 Y-21.591 E1.52542 G1 X-83.75 Y-20.943 E.02419 G1 X-55.507 Y7.3 E1.49121 G1 X-56.155 Y7.3 E.02419 G1 X-83.75 Y-20.295 E1.457 G1 X-83.75 Y-19.647 E.02419 G1 X-56.803 Y7.3 E1.42279 G1 X-57.451 Y7.3 E.02419 G1 X-83.75 Y-18.999 E1.38857 G1 X-83.75 Y-18.351 E.02419 G1 X-58.099 Y7.3 E1.35436 G1 X-58.747 Y7.3 E.02419 G1 X-83.75 Y-17.703 E1.32015 G1 X-83.75 Y-17.055 E.02419 G1 X-59.395 Y7.3 E1.28594 G1 X-60.043 Y7.3 E.02419 G1 X-83.75 Y-16.407 E1.25173 G1 X-83.75 Y-15.759 E.02419 G1 X-60.691 Y7.3 E1.21752 G1 X-61.339 Y7.3 E.02419 G1 X-83.75 Y-15.111 E1.18331 G1 X-83.75 Y-14.463 E.02419 G1 X-61.987 Y7.3 E1.1491 G1 X-62.635 Y7.3 E.02419 G1 X-83.75 Y-13.815 E1.11488 G1 X-83.75 Y-13.167 E.02419 G1 X-63.283 Y7.3 E1.08067 G1 X-63.931 Y7.3 E.02419 G1 X-83.75 Y-12.519 E1.04646 G1 X-83.75 Y-11.871 E.02419 G1 X-64.579 Y7.3 E1.01225 G1 X-65.226 Y7.3 E.02419 G1 X-83.827 Y-11.3 E.98208 G1 X-84.475 Y-11.3 E.02419 M73 P3 R105 G1 X-65.874 Y7.3 E.98208 G1 X-66.522 Y7.3 E.02419 G1 X-85.123 Y-11.3 E.98208 G1 X-85.771 Y-11.3 E.02419 G1 X-67.17 Y7.3 E.98208 G1 X-67.818 Y7.3 E.02419 G1 X-85.968 Y-10.85 E.95829 G3 X-85.852 Y-10.085 I-3.586 J.936 E.02891 G1 X-68.466 Y7.3 E.91795 G1 X-69.114 Y7.3 E.02419 G1 X-85.896 Y-9.481 E.88605 G3 X-86.03 Y-8.968 I-2.018 J-.253 E.01988 G1 X-84.962 Y-7.9 E.05638 G1 X-85.61 Y-7.9 E.02419 G1 X-86.228 Y-8.518 E.03263 G3 X-86.48 Y-8.122 I-1.629 J-.76 E.01757 G1 X-86.052 Y-7.694 E.02259 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-86.48 Y-8.122 G1 X-86.228 Y-8.518 G1 X-85.61 Y-7.9 G1 X-85.558 Y-7.9 ;WIPE_END G1 X-84.456 Y-7.394 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-69.762 Y7.3 E.77582 G1 X-70.41 Y7.3 E.02419 G1 X-84.25 Y-6.54 E.73075 G1 X-84.25 Y-5.892 E.02419 G1 X-71.058 Y7.3 E.69654 G1 X-71.706 Y7.3 E.02419 G1 X-84.25 Y-5.244 E.66233 G1 X-84.25 Y-4.596 E.02419 G1 X-72.354 Y7.3 E.62811 G1 X-73.002 Y7.3 E.02419 G1 X-84.25 Y-3.948 E.5939 G1 X-84.25 Y-3.3 E.02419 G1 X-73.65 Y7.3 E.55969 G1 X-74.15 Y7.3 E.01867 G1 X-74.15 Y7.448 E.00552 G1 X-84.25 Y-2.652 E.53329 G1 X-84.25 Y-2.004 E.02419 G1 X-74.15 Y8.096 E.53329 G1 X-74.15 Y8.744 E.02419 G1 X-84.25 Y-1.356 E.53329 G1 X-84.25 Y-1.1 E.00957 G1 X-84.642 Y-1.1 E.01462 G1 X-74.15 Y9.392 E.55397 G1 X-74.15 Y10.04 E.02419 G1 X-85.29 Y-1.1 E.58818 G1 X-85.938 Y-1.1 E.02419 G1 X-74.15 Y10.688 E.62239 G1 X-74.15 Y11.336 E.02419 G1 X-86.586 Y-1.1 E.6566 G1 X-87.234 Y-1.1 E.02419 G1 X-74.15 Y11.984 E.69081 G1 X-74.15 Y12.632 E.02419 G1 X-87.882 Y-1.1 E.72502 G1 X-88.529 Y-1.1 E.02419 G1 X-74.15 Y13.279 E.75924 G1 X-74.15 Y13.927 E.02419 G1 X-89.177 Y-1.1 E.79345 G1 X-89.671 Y-1.1 E.01844 G1 X-89.671 Y-.946 E.00575 G1 X-74.15 Y14.575 E.81952 G1 X-74.15 Y15.223 E.02419 G1 X-90.245 Y-.872 E.8498 G1 X-90.25 Y-.229 E.02399 G1 X-74.15 Y15.871 E.85008 G1 X-74.15 Y16.519 E.02419 G1 X-90.25 Y.419 E.85008 G1 X-90.25 Y1.067 E.02419 G1 X-74.15 Y17.167 E.85008 G1 X-74.15 Y17.815 E.02419 G1 X-90.25 Y1.715 E.85008 G1 X-90.25 Y2.363 E.02419 G1 X-74.15 Y18.463 E.85008 G1 X-74.15 Y19.111 E.02419 G1 X-90.25 Y3.011 E.85008 G1 X-90.25 Y3.659 E.02419 G1 X-74.15 Y19.759 E.85008 G1 X-74.15 Y20.407 E.02419 G1 X-90.25 Y4.307 E.85008 G1 X-90.25 Y4.955 E.02419 G1 X-74.15 Y21.055 E.85008 G1 X-74.15 Y21.703 E.02419 G1 X-90.25 Y5.603 E.85008 G1 X-90.25 Y6.251 E.02419 G1 X-74.15 Y22.351 E.85008 G1 X-74.15 Y22.999 E.02419 G1 X-90.25 Y6.898 E.85008 G1 X-90.25 Y7.546 E.02419 G1 X-74.15 Y23.647 E.85008 G1 X-74.15 Y24.295 E.02419 G1 X-90.25 Y8.194 E.85008 G1 X-90.25 Y8.842 E.02419 G1 X-74.15 Y24.943 E.85008 G1 X-74.15 Y25.59 E.02419 G1 X-90.25 Y9.49 E.85008 G1 X-90.25 Y10.138 E.02419 G1 X-74.15 Y26.238 E.85008 G1 X-74.15 Y26.886 E.02419 G1 X-90.25 Y10.786 E.85008 G1 X-90.25 Y11.434 E.02419 G1 X-74.15 Y27.534 E.85008 G1 X-74.15 Y28.182 E.02419 G1 X-90.25 Y12.082 E.85008 G1 X-90.25 Y12.73 E.02419 G1 X-74.15 Y28.83 E.85008 G1 X-74.15 Y29.478 E.02419 G1 X-90.25 Y13.378 E.85008 G1 X-90.25 Y14.026 E.02419 G1 X-84.976 Y19.3 E.27848 G1 X-85.624 Y19.3 E.02419 G1 X-90.25 Y14.674 E.24426 G1 X-90.25 Y15.322 E.02419 G1 X-86.272 Y19.3 E.21005 G1 X-86.92 Y19.3 E.02419 G1 X-90.25 Y15.97 E.17584 G1 X-90.25 Y16.618 E.02419 G1 X-87.568 Y19.3 E.14163 G1 X-88.216 Y19.3 E.02419 G1 X-90.25 Y17.266 E.10742 G1 X-90.25 Y17.914 E.02419 G1 X-88.864 Y19.3 E.07321 G1 X-89.512 Y19.3 E.02419 G1 X-90.456 Y18.356 E.04986 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-89.512 Y19.3 G1 X-88.864 Y19.3 G1 X-88.875 Y19.288 ;WIPE_END G1 X-84.456 Y19.82 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-74.15 Y30.126 E.54415 G1 X-74.15 Y30.774 E.02419 G1 X-84.25 Y20.674 E.53329 G1 X-84.25 Y21.322 E.02419 G1 X-73.944 Y31.628 E.54415 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-75.358 Y30.213 ;WIPE_END G1 X-67.733 Y29.89 Z.6 F30000 G1 X-14.444 Y27.629 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-15.373 Y26.7 E.04905 G1 X-16.021 Y26.7 E.02419 G1 X-14.65 Y28.071 E.0724 G1 X-14.65 Y28.719 E.02419 G1 X-16.669 Y26.7 E.10661 G1 X-17.317 Y26.7 E.02419 G1 X-14.65 Y29.367 E.14082 G1 X-14.65 Y30.015 E.02419 G1 X-17.965 Y26.7 E.17503 G1 X-18.613 Y26.7 E.02419 G1 X-14.65 Y30.663 E.20925 G1 X-14.65 Y31.311 E.02419 G1 X-19.261 Y26.7 E.24346 G1 X-19.909 Y26.7 E.02419 G1 X-14.65 Y31.959 E.27767 G1 X-14.65 Y32.607 E.02419 G1 X-30.75 Y16.507 E.85008 G1 X-30.75 Y17.154 E.02419 G1 X-14.65 Y33.255 E.85008 G1 X-14.65 Y33.903 E.02419 G1 X-30.75 Y17.802 E.85008 G1 X-30.75 Y18.45 E.02419 G1 X-14.65 Y34.551 E.85008 G1 X-14.65 Y35.199 E.02419 G1 X-30.75 Y19.098 E.85008 G1 X-30.75 Y19.746 E.02419 G1 X-14.65 Y35.846 E.85008 G1 X-14.65 Y36.494 E.02419 G1 X-30.75 Y20.394 E.85008 G1 X-30.75 Y21.042 E.02419 G1 X-14.65 Y37.142 E.85008 G1 X-14.65 Y37.79 E.02419 G1 X-30.75 Y21.69 E.85008 G1 X-30.75 Y22.338 E.02419 G1 X-14.65 Y38.438 E.85008 G1 X-14.65 Y39.086 E.02419 G1 X-30.75 Y22.986 E.85008 G1 X-30.75 Y23.634 E.02419 G1 X-14.65 Y39.734 E.85008 G1 X-14.65 Y40.382 E.02419 G1 X-30.75 Y24.282 E.85008 G1 X-30.75 Y24.93 E.02419 G1 X-14.65 Y41.03 E.85008 G1 X-14.65 Y41.678 E.02419 G1 X-30.75 Y25.578 E.85008 G1 X-30.75 Y26.226 E.02419 G1 X-14.65 Y42.326 E.85008 G1 X-14.65 Y42.974 E.02419 G1 X-30.75 Y26.874 E.85008 G1 X-30.75 Y27.522 E.02419 G1 X-14.65 Y43.622 E.85008 G1 X-14.65 Y44.27 E.02419 G1 X-30.75 Y28.17 E.85008 G1 X-30.75 Y28.818 E.02419 G1 X-14.65 Y44.918 E.85008 G1 X-14.65 Y45.566 E.02419 G1 X-30.75 Y29.465 E.85008 G1 X-30.75 Y30.113 E.02419 G1 X-14.65 Y46.214 E.85008 G1 X-14.65 Y46.862 E.02419 G1 X-30.75 Y30.761 E.85008 G1 X-30.75 Y31.409 E.02419 G1 X-14.65 Y47.51 E.85008 G1 X-14.65 Y47.608 E.00366 G1 X-15.151 Y47.657 E.01879 G1 X-30.75 Y32.057 E.82364 G1 X-30.755 Y32.7 E.02399 G1 X-17.529 Y45.926 E.69834 G1 X-17.553 Y45.921 E.0009 G2 X-18.191 Y45.912 I-.357 J2.608 E.02389 G1 X-31.403 Y32.7 E.69761 G1 X-32.051 Y32.7 E.02419 G1 X-18.753 Y46.002 E.70224 G2 X-19.224 Y46.175 I.421 J1.873 E.01878 M73 P4 R105 G1 X-32.699 Y32.7 E.71149 G1 X-33.347 Y32.7 E.02419 G1 X-19.641 Y46.406 E.72366 G2 X-20.009 Y46.686 I.883 J1.535 E.01731 G1 X-33.995 Y32.7 E.73848 G1 X-34.643 Y32.7 E.02419 G1 X-20.328 Y47.015 E.75582 G2 X-20.6 Y47.391 I1.294 J1.22 E.01738 G1 X-35.291 Y32.7 E.7757 G1 X-35.939 Y32.7 E.02419 G1 X-20.82 Y47.819 E.79829 G2 X-20.971 Y48.316 I1.798 J.821 E.01943 G1 X-36.587 Y32.7 E.8245 G1 X-37.235 Y32.7 E.02419 G1 X-21.045 Y48.89 E.85482 G2 X-21.028 Y49.304 I1.383 J.15 E.01552 G1 X-21.279 Y49.304 E.00938 G1 X-37.883 Y32.7 E.87667 G1 X-38.531 Y32.7 E.02419 G1 X-21.927 Y49.304 E.87667 G1 X-22.575 Y49.304 E.02419 G1 X-39.179 Y32.7 E.87667 G1 X-39.827 Y32.7 E.02419 G1 X-23.223 Y49.304 E.87667 G1 X-23.871 Y49.304 E.02419 G1 X-40.475 Y32.7 E.87667 G1 X-41.123 Y32.7 E.02419 G1 X-24.519 Y49.304 E.87667 G1 X-25.167 Y49.304 E.02419 G1 X-41.771 Y32.7 E.87667 G1 X-42.418 Y32.7 E.02419 G1 X-25.815 Y49.304 E.87666 G1 X-26.463 Y49.304 E.02419 G1 X-43.066 Y32.7 E.87666 G1 X-43.714 Y32.7 E.02419 G1 X-27.111 Y49.304 E.87666 G1 X-27.759 Y49.304 E.02419 G1 X-44.362 Y32.7 E.87666 G1 X-45.01 Y32.7 E.02419 G1 X-28.407 Y49.304 E.87666 G1 X-29.055 Y49.304 E.02419 G1 X-45.658 Y32.7 E.87666 G1 X-46.306 Y32.7 E.02419 G1 X-29.703 Y49.304 E.87666 G1 X-30.351 Y49.304 E.02419 G1 X-46.954 Y32.7 E.87666 G1 X-47.602 Y32.7 E.02419 G1 X-30.998 Y49.303 E.87666 G1 X-31.646 Y49.303 E.02419 G1 X-48.25 Y32.7 E.87666 G1 X-48.898 Y32.7 E.02419 G1 X-32.294 Y49.303 E.87666 G1 X-32.942 Y49.303 E.02419 G1 X-49.546 Y32.7 E.87666 G1 X-50.194 Y32.7 E.02419 G1 X-33.59 Y49.303 E.87666 G1 X-34.238 Y49.303 E.02419 G1 X-50.842 Y32.7 E.87666 G1 X-51.49 Y32.7 E.02419 G1 X-34.886 Y49.303 E.87666 G1 X-35.534 Y49.303 E.02419 G1 X-52.138 Y32.7 E.87666 G1 X-52.786 Y32.7 E.02419 G1 X-36.182 Y49.303 E.87666 G1 X-36.83 Y49.303 E.02419 G1 X-53.434 Y32.7 E.87666 G1 X-54.082 Y32.7 E.02419 G1 X-37.478 Y49.303 E.87666 G1 X-38.126 Y49.303 E.02419 G1 X-54.729 Y32.7 E.87666 G1 X-55.377 Y32.7 E.02419 G1 X-38.774 Y49.303 E.87666 G1 X-39.422 Y49.303 E.02419 G1 X-56.025 Y32.7 E.87666 G1 X-56.673 Y32.7 E.02419 G1 X-40.07 Y49.303 E.87666 G1 X-40.718 Y49.303 E.02419 G1 X-57.321 Y32.7 E.87666 G1 X-57.969 Y32.7 E.02419 G1 X-41.366 Y49.303 E.87666 G1 X-42.014 Y49.303 E.02419 G1 X-58.617 Y32.7 E.87666 G1 X-59.265 Y32.7 E.02419 G1 X-42.662 Y49.303 E.87666 G1 X-43.31 Y49.303 E.02419 G1 X-59.913 Y32.7 E.87666 G1 X-60.561 Y32.7 E.02419 G1 X-43.958 Y49.303 E.87666 G1 X-44.605 Y49.303 E.02419 M73 P4 R104 G1 X-61.209 Y32.7 E.87665 G1 X-61.857 Y32.7 E.02419 G1 X-45.253 Y49.303 E.87665 G1 X-45.901 Y49.303 E.02419 G1 X-62.505 Y32.7 E.87665 G1 X-63.153 Y32.7 E.02419 G1 X-46.549 Y49.303 E.87665 G1 X-47.197 Y49.303 E.02419 G1 X-63.801 Y32.7 E.87665 G1 X-64.449 Y32.7 E.02419 G1 X-47.845 Y49.303 E.87665 G1 X-48.493 Y49.303 E.02419 G1 X-65.097 Y32.7 E.87665 G1 X-65.745 Y32.7 E.02419 G1 X-49.141 Y49.303 E.87665 G1 X-49.789 Y49.303 E.02419 G1 X-66.393 Y32.7 E.87665 G1 X-67.04 Y32.7 E.02419 G1 X-50.437 Y49.303 E.87665 G1 X-51.085 Y49.303 E.02419 G1 X-67.688 Y32.7 E.87665 G1 X-68.336 Y32.7 E.02419 G1 X-51.733 Y49.303 E.87665 G1 X-52.381 Y49.303 E.02419 G1 X-68.984 Y32.7 E.87665 G1 X-69.632 Y32.7 E.02419 G1 X-53.029 Y49.303 E.87665 G1 X-53.677 Y49.303 E.02419 G1 X-70.28 Y32.7 E.87665 G1 X-70.928 Y32.7 E.02419 G1 X-54.325 Y49.303 E.87665 G1 X-54.973 Y49.303 E.02419 G1 X-71.576 Y32.7 E.87665 G1 X-72.224 Y32.7 E.02419 G1 X-55.621 Y49.303 E.87665 G1 X-56.269 Y49.303 E.02419 G1 X-73.078 Y32.494 E.88751 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-71.663 Y33.908 ;WIPE_END G1 X-77.199 Y28.653 Z.6 F30000 G1 X-84.456 Y21.764 Z.6 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-74.15 Y32.07 E.54415 G1 X-74.15 Y32.7 E.02352 G1 X-73.52 Y32.7 E.02352 G1 X-56.917 Y49.303 E.87665 G1 X-57.565 Y49.303 E.02419 G1 X-84.25 Y22.618 E1.40898 G1 X-84.25 Y23.266 E.02419 G1 X-58.213 Y49.303 E1.37477 G1 X-58.86 Y49.303 E.02419 G1 X-84.25 Y23.914 E1.34056 G1 X-84.25 Y24.562 E.02419 G1 X-59.508 Y49.303 E1.30635 G1 X-60.156 Y49.303 E.02419 G1 X-84.25 Y25.209 E1.27214 G1 X-84.25 Y25.857 E.02419 G1 X-60.804 Y49.303 E1.23793 G1 X-61.452 Y49.303 E.02419 G1 X-84.25 Y26.505 E1.20371 G1 X-84.25 Y26.7 E.00726 G1 X-84.704 Y26.7 E.01693 G1 X-62.1 Y49.303 E1.19344 G1 X-62.748 Y49.303 E.02419 G1 X-85.351 Y26.7 E1.19344 G1 X-85.999 Y26.7 E.02419 G1 X-63.396 Y49.303 E1.19344 G1 X-64.044 Y49.303 E.02419 G1 X-86.647 Y26.7 E1.19344 G1 X-87.295 Y26.7 E.02419 G1 X-64.692 Y49.303 E1.19344 G1 X-65.34 Y49.303 E.02419 G1 X-87.943 Y26.7 E1.19344 G1 X-88.591 Y26.7 E.02419 G1 X-65.988 Y49.303 E1.19344 G1 X-66.636 Y49.303 E.02419 G1 X-89.239 Y26.7 E1.19344 G1 X-89.671 Y26.7 E.01613 G1 X-89.671 Y26.916 E.00806 G1 X-67.284 Y49.303 E1.18205 G1 X-67.932 Y49.303 E.02419 G1 X-90.25 Y26.985 E1.17839 G1 X-90.25 Y27.633 E.02419 G1 X-68.58 Y49.303 E1.14418 G1 X-69.228 Y49.303 E.02419 G1 X-90.25 Y28.281 E1.10997 G1 X-90.25 Y28.929 E.02419 G1 X-69.876 Y49.303 E1.07576 G1 X-70.524 Y49.303 E.02419 G1 X-90.25 Y29.577 E1.04155 G1 X-90.25 Y30.225 E.02419 G1 X-71.172 Y49.303 E1.00734 G1 X-71.82 Y49.303 E.02419 G1 X-90.25 Y30.873 E.97312 G1 X-90.25 Y31.52 E.02419 G1 X-72.468 Y49.303 E.93891 G1 X-73.115 Y49.303 E.02419 G1 X-90.25 Y32.168 E.9047 G1 X-90.25 Y32.816 E.02419 G1 X-73.763 Y49.303 E.87049 G1 X-74.411 Y49.303 E.02419 G1 X-90.25 Y33.464 E.83628 G1 X-90.25 Y34.112 E.02419 G1 X-75.059 Y49.303 E.80207 G1 X-75.707 Y49.303 E.02419 G1 X-90.25 Y34.76 E.76785 G1 X-90.25 Y35.408 E.02419 G1 X-76.355 Y49.303 E.73364 G1 X-77.003 Y49.303 E.02419 G1 X-90.25 Y36.056 E.69943 G1 X-90.25 Y36.704 E.02419 G1 X-77.651 Y49.303 E.66522 G1 X-78.299 Y49.303 E.02419 G1 X-90.25 Y37.352 E.63101 G1 X-90.25 Y38 E.02419 G1 X-78.947 Y49.303 E.5968 G1 X-79.595 Y49.303 E.02419 G1 X-90.25 Y38.648 E.56258 G1 X-90.25 Y39.296 E.02419 G1 X-80.243 Y49.303 E.52837 G1 X-80.891 Y49.303 E.02419 G1 X-90.25 Y39.944 E.49416 G1 X-90.25 Y40.592 E.02419 G1 X-81.539 Y49.303 E.45995 G1 X-82.187 Y49.303 E.02419 G1 X-90.25 Y41.24 E.42574 G1 X-90.25 Y41.888 E.02419 G1 X-86.13 Y46.008 E.21755 G3 X-83.958 Y48.18 I-.814 J2.985 E.11998 G1 X-82.835 Y49.303 E.05932 G1 X-83.483 Y49.303 E.02419 G1 X-84.074 Y48.712 E.0312 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X-83.483 Y49.303 G1 X-82.835 Y49.303 G1 X-83.2 Y48.938 ;WIPE_END G1 X-86.664 Y46.121 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F4800 G1 X-90.25 Y42.536 E.18932 G1 X-90.25 Y43.184 E.02419 G1 X-87.485 Y45.949 E.14601 G2 X-87.997 Y46.085 I.261 J2.013 E.01983 G1 X-90.25 Y43.831 E.11898 G1 X-90.25 Y44.479 E.02419 G1 X-88.445 Y46.284 E.0953 G2 X-88.84 Y46.538 I3.867 J6.446 E.01751 G1 X-90.25 Y45.127 E.07448 G1 X-90.25 Y45.775 E.02419 G1 X-89.18 Y46.845 E.05649 G2 X-89.472 Y47.201 I1.31 J1.374 E.01723 G1 X-90.25 Y46.423 E.04106 G1 X-90.25 Y47.071 E.02419 G1 X-89.562 Y47.759 E.03634 G1 X-90.078 Y47.969 F30000 ;TYPE:Gap infill ;WIDTH:0.547637 G1 F3000 G1 X-90.108 Y48.269 E.01242 ;WIDTH:0.512711 G2 X-90.139 Y48.6 I4.92 J.633 E.01273 ;WIDTH:0.481666 G2 X-90.136 Y49.415 I5.985 J.382 E.02914 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-90.151 Y49.001 G1 X-90.139 Y48.6 ;WIPE_END G1 X-88.658 Y50.094 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.145623 G1 F3000 G1 X-88.581 Y50.213 E.00119 ;WIDTH:0.166974 G1 X-88.504 Y50.333 E.00144 ;WIDTH:0.195207 G1 X-88.277 Y50.428 E.00305 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-88.504 Y50.333 ;WIPE_END G1 X-89.048 Y42.72 Z.6 F30000 G1 X-90.2 Y26.586 Z.6 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.371682 G1 F3000 G1 X-90.2 Y19.414 E.19212 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-90.2 Y21.414 ;WIPE_END G1 X-90.2 Y13.782 Z.6 F30000 G1 X-90.2 Y-1.214 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-90.2 Y-7.291 E.16279 G1 X-89.579 Y-7.438 F30000 ;WIDTH:0.206648 G1 F3000 G1 X-89.296 Y-7.41 E.00378 ;WIDTH:0.195215 G2 X-88.594 Y-7.412 I.338 J-7.306 E.00871 ;WIDTH:0.224837 G1 X-88.428 Y-7.428 E.00247 ;WIDTH:0.256513 G1 X-88.273 Y-7.443 E.00273 ;WIDTH:0.291642 G1 X-88.147 Y-7.463 E.00258 ;WIDTH:0.330504 G1 X-88.037 Y-7.481 E.00262 ;WIDTH:0.366944 G1 X-87.926 Y-7.5 E.00295 ;WIDTH:0.389679 G1 X-87.543 Y-7.576 E.01104 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-87.926 Y-7.5 ;WIPE_END G1 X-90.759 Y-9.007 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.475784 G1 F3000 G1 X-91.05 Y-9.145 E.01136 ;WIDTH:0.48505 G1 X-91.069 Y-9.155 E.00076 G1 X-91.09 Y-9.282 E.00462 ;WIDTH:0.442367 G1 X-91.111 Y-9.408 E.00418 ;WIDTH:0.418234 G1 X-91.114 Y-9.433 E.00076 ;WIDTH:0.390257 G1 X-91.139 Y-9.684 E.00714 ;WIDTH:0.356053 G3 X-91.14 Y-10.299 I4.269 J-.319 E.0157 G1 X-91.127 Y-10.433 E.00344 ;WIDTH:0.401788 G1 X-91.114 Y-10.567 E.00394 ;WIDTH:0.438468 G3 X-91.09 Y-10.718 I2.331 J.295 E.00493 ;WIDTH:0.48417 G1 X-91.069 Y-10.845 E.00461 ;WIDTH:0.490422 G1 X-91.05 Y-10.855 E.00077 ;WIDTH:0.451546 G1 X-90.759 Y-10.993 E.01072 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-91.05 Y-10.855 ;WIPE_END G1 X-89.942 Y-11.809 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.444451 G1 F3000 G1 X-89.874 Y-11.952 E.00521 ;WIDTH:0.457142 G1 X-89.807 Y-12.096 E.00537 ;WIDTH:0.484713 G1 X-89.795 Y-12.119 E.00091 G1 X-89.668 Y-12.14 E.00462 ;WIDTH:0.442372 G1 X-89.542 Y-12.161 E.00418 ;WIDTH:0.404339 G3 X-89.383 Y-12.177 I.329 J2.405 E.0047 ;WIDTH:0.375356 G1 X-89.249 Y-12.19 E.00365 ;WIDTH:0.355801 G3 X-88.518 Y-12.177 I.277 J4.932 E.01864 ;WIDTH:0.40164 G1 X-88.383 Y-12.164 E.00399 ;WIDTH:0.438471 G3 X-88.232 Y-12.14 I-.295 J2.332 E.00493 ;WIDTH:0.484174 G1 X-88.105 Y-12.119 E.00461 ;WIDTH:0.490409 G1 X-88.095 Y-12.1 E.00077 ;WIDTH:0.45152 G1 X-87.957 Y-11.809 E.01072 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-88.095 Y-12.1 ;WIPE_END G1 X-80.463 Y-12.069 Z.6 F30000 G1 X-16.942 Y-11.809 Z.6 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.444451 G1 F3000 G1 X-16.874 Y-11.952 E.00521 ;WIDTH:0.457142 G1 X-16.807 Y-12.096 E.00537 ;WIDTH:0.484713 G1 X-16.795 Y-12.119 E.00091 G1 X-16.668 Y-12.14 E.00462 ;WIDTH:0.442372 G1 X-16.542 Y-12.161 E.00418 ;WIDTH:0.404339 G3 X-16.383 Y-12.177 I.329 J2.405 E.0047 ;WIDTH:0.375356 G1 X-16.249 Y-12.19 E.00365 ;WIDTH:0.355801 G3 X-15.518 Y-12.177 I.277 J4.932 E.01864 ;WIDTH:0.40164 G1 X-15.383 Y-12.164 E.00399 ;WIDTH:0.438471 G3 X-15.232 Y-12.14 I-.295 J2.332 E.00493 ;WIDTH:0.484174 G1 X-15.105 Y-12.119 E.00461 ;WIDTH:0.490409 G1 X-15.095 Y-12.1 E.00077 ;WIDTH:0.45152 G1 X-14.957 Y-11.809 E.01072 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-15.095 Y-12.1 ;WIPE_END G1 X-14.141 Y-10.993 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.475728 G1 F3000 G1 X-13.85 Y-10.855 E.01135 ;WIDTH:0.485053 G1 X-13.831 Y-10.845 E.00076 G1 X-13.81 Y-10.718 E.00462 ;WIDTH:0.442372 G1 X-13.789 Y-10.592 E.00418 ;WIDTH:0.418235 G1 X-13.786 Y-10.567 E.00076 ;WIDTH:0.390258 G1 X-13.761 Y-10.316 E.00714 ;WIDTH:0.356054 G3 X-13.76 Y-9.701 I-4.269 J.319 E.0157 G1 X-13.773 Y-9.567 E.00344 ;WIDTH:0.401788 G1 X-13.786 Y-9.433 E.00394 ;WIDTH:0.438469 G3 X-13.81 Y-9.282 I-2.329 J-.295 E.00493 ;WIDTH:0.484175 G1 X-13.831 Y-9.155 E.00461 ;WIDTH:0.490405 G1 X-13.85 Y-9.145 E.00077 ;WIDTH:0.451513 G1 X-14.141 Y-9.007 E.01072 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-13.85 Y-9.145 ;WIPE_END G1 X-14.077 Y-1.516 Z.6 F30000 G1 X-14.7 Y19.414 Z.6 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.371684 G1 F3000 G1 X-14.7 Y26.586 E.19212 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-14.7 Y24.586 ;WIPE_END G1 X-14.74 Y32.218 Z.6 F30000 G1 X-14.822 Y47.969 Z.6 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.530983 G1 F3000 G1 X-14.792 Y48.27 E.01202 ;WIDTH:0.514345 G1 X-14.763 Y48.571 E.01161 ;WIDTH:0.479506 G3 X-14.764 Y49.415 I-8.835 J.407 E.03005 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-14.749 Y49.001 G1 X-14.763 Y48.571 ;WIPE_END G1 X-16.23 Y50.078 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.126074 G1 F3000 G1 X-16.311 Y50.206 E.00102 ;WIDTH:0.17238 G1 X-16.391 Y50.334 E.00159 ;WIDTH:0.200271 G1 X-16.622 Y50.432 E.00322 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-16.391 Y50.334 ;WIPE_END G1 X-19.277 Y50.428 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.196362 G1 F3000 G1 X-19.506 Y50.332 E.00311 ;WIDTH:0.167786 G1 X-19.585 Y50.209 E.00148 ;WIDTH:0.146164 G1 X-19.663 Y50.086 E.00123 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-19.585 Y50.209 ;WIPE_END G1 X-18.66 Y42.632 Z.6 F30000 G1 X-8.99 Y-36.606 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Brim ;WIDTH:0.5 G1 F3000 G1 X-9.613 Y-36.746 E.02377 G1 X-10.456 Y-37.103 E.03411 G1 X-11.074 Y-37.5 E.02737 G1 X-11.553 Y-37.926 E.02386 G1 X-11.964 Y-38.419 E.0239 G1 X-12.297 Y-38.964 E.0238 G1 X-12.608 Y-39.75 E.03148 G1 X-12.754 Y-40.43 E.02589 G1 X-12.792 Y-41.008 E.02157 G1 X-12.792 Y-50.992 E.37187 G1 X-12.744 Y-51.64 E.02422 G1 X-12.604 Y-52.263 E.02377 G1 X-12.247 Y-53.106 E.03411 G1 X-11.85 Y-53.724 E.02737 G1 X-11.424 Y-54.203 E.02386 G1 X-10.931 Y-54.614 E.0239 G1 X-10.386 Y-54.947 E.02378 G1 X-9.548 Y-55.273 E.0335 G1 X-8.921 Y-55.404 E.02386 G1 X-8.342 Y-55.442 E.02159 G1 X8.342 Y-55.442 E.62142 G1 X8.99 Y-55.394 E.02422 G1 X9.613 Y-55.254 E.02377 G1 X10.456 Y-54.897 E.03411 G1 X11.074 Y-54.5 E.02737 G1 X11.553 Y-54.074 E.02386 G1 X11.964 Y-53.581 E.0239 G1 X12.297 Y-53.036 E.0238 G1 X12.608 Y-52.25 E.03148 G1 X12.754 Y-51.57 E.02589 G1 X12.792 Y-50.992 E.02157 G1 X12.792 Y-41.008 E.37187 G1 X12.744 Y-40.36 E.02422 G1 X12.604 Y-39.737 E.02377 G1 X12.247 Y-38.894 E.03411 G1 X11.85 Y-38.276 E.02737 G1 X11.424 Y-37.797 E.02386 G1 X10.931 Y-37.386 E.0239 G1 X10.386 Y-37.053 E.02378 G1 X9.548 Y-36.727 E.0335 G1 X8.921 Y-36.596 E.02386 G1 X8.342 Y-36.558 E.02159 G1 X-8.342 Y-36.558 E.62142 G1 X-8.95 Y-36.603 E.02273 G1 X-8.912 Y-37.058 F30000 G1 F3000 G1 X-9.46 Y-37.18 E.0209 G1 X-10.231 Y-37.505 E.03116 G1 X-10.788 Y-37.86 E.02461 G1 X-11.23 Y-38.253 E.02203 G1 X-11.597 Y-38.694 E.02138 G1 X-11.891 Y-39.18 E.02114 G1 X-12.165 Y-39.873 E.02775 G1 X-12.301 Y-40.503 E.02403 G1 X-12.335 Y-41.027 E.01956 G1 X-12.335 Y-50.97 E.37032 G1 X-12.292 Y-51.562 E.02214 G1 X-12.17 Y-52.11 E.0209 G1 X-11.845 Y-52.881 E.03116 G1 X-11.49 Y-53.438 E.02461 G1 X-11.097 Y-53.88 E.02203 G1 X-10.656 Y-54.247 E.02138 G1 X-10.172 Y-54.54 E.02108 G1 X-9.406 Y-54.836 E.03055 G1 X-8.868 Y-54.948 E.02048 G1 X-8.332 Y-54.985 E.02002 G1 X8.33 Y-54.985 E.62058 G1 X8.932 Y-54.939 E.02251 G1 X9.483 Y-54.812 E.02106 G1 X10.231 Y-54.495 E.03025 G1 X10.805 Y-54.127 E.02541 G1 X11.23 Y-53.747 E.02123 G1 X11.585 Y-53.322 E.02062 G1 X11.88 Y-52.841 E.02102 G1 X12.165 Y-52.127 E.02862 G1 X12.298 Y-51.517 E.02329 G1 X12.335 Y-50.973 E.0203 G1 X12.335 Y-41.03 E.37032 G1 X12.292 Y-40.438 E.02214 G1 X12.162 Y-39.867 E.02181 G1 X11.845 Y-39.119 E.03025 G1 X11.49 Y-38.562 E.02461 G1 X11.097 Y-38.12 E.02203 G1 X10.656 Y-37.753 E.02138 G1 X10.172 Y-37.46 E.02108 G1 X9.406 Y-37.164 E.03055 G1 X8.868 Y-37.052 E.02048 G1 X8.332 Y-37.015 E.02002 G1 X-8.32 Y-37.015 E.6202 G1 X-8.872 Y-37.055 E.02065 G1 X-8.835 Y-37.511 F30000 G1 F3000 G1 X-9.309 Y-37.615 E.01804 G1 X-10.008 Y-37.906 E.0282 G1 X-10.52 Y-38.233 E.02263 G1 X-10.893 Y-38.564 E.01859 G1 X-11.217 Y-38.952 E.01882 G1 X-11.484 Y-39.394 E.01924 G1 X-11.722 Y-39.995 E.02407 G1 X-11.845 Y-40.557 E.02141 G1 X-11.878 Y-41.038 E.01795 G1 X-11.878 Y-50.958 E.36949 G1 X-11.839 Y-51.485 E.01971 G1 X-11.735 Y-51.959 E.01804 G1 X-11.444 Y-52.658 E.0282 G1 X-11.117 Y-53.17 E.02263 G1 X-10.786 Y-53.543 E.01859 G1 X-10.398 Y-53.867 E.01882 G1 X-9.958 Y-54.132 E.01913 G1 X-9.287 Y-54.392 E.02681 G1 X-8.815 Y-54.492 E.01798 G1 X-8.321 Y-54.527 E.01844 G1 X8.307 Y-54.528 E.61933 G1 X8.853 Y-54.486 E.0204 G1 X9.353 Y-54.371 E.01911 G1 X10.006 Y-54.094 E.02643 G1 X10.536 Y-53.755 E.02343 G1 X10.907 Y-53.421 E.01858 G1 X11.218 Y-53.046 E.01814 G1 X11.464 Y-52.646 E.01752 G1 X11.722 Y-52.004 E.02577 G1 X11.845 Y-51.442 E.02142 G1 X11.878 Y-50.953 E.01827 G1 X11.878 Y-41.052 E.36875 G1 X11.839 Y-40.516 E.02004 G1 X11.721 Y-39.996 E.01984 G1 X11.433 Y-39.323 E.02728 G1 X11.117 Y-38.83 E.0218 G1 X10.786 Y-38.457 E.01859 G1 X10.398 Y-38.133 E.01882 G1 X9.958 Y-37.868 E.01913 G1 X9.287 Y-37.608 E.02681 G1 X8.815 Y-37.508 E.01798 G1 X8.321 Y-37.473 E.01844 G1 X-8.308 Y-37.472 E.61936 G1 X-8.796 Y-37.508 E.01822 G1 X-8.76 Y-37.964 F30000 M73 P5 R104 G1 F3000 G1 X-9.158 Y-38.05 E.0152 G1 X-9.784 Y-38.309 E.02522 G1 X-10.252 Y-38.606 E.02064 G1 X-10.57 Y-38.891 E.01592 G1 X-10.837 Y-39.21 E.01549 G1 X-11.077 Y-39.609 E.01732 G1 X-11.279 Y-40.119 E.02044 G1 X-11.389 Y-40.612 E.01881 G1 X-11.42 Y-41.049 E.01631 G1 X-11.42 Y-50.946 E.36864 G1 X-11.386 Y-51.41 E.01731 G1 X-11.3 Y-51.808 E.0152 G1 X-11.041 Y-52.434 E.02522 G1 X-10.744 Y-52.902 E.02064 G1 X-10.459 Y-53.22 E.01592 G1 X-10.14 Y-53.487 E.01548 G1 X-9.745 Y-53.725 E.01717 G1 X-9.166 Y-53.948 E.02311 G1 X-8.741 Y-54.039 E.01619 G1 X-8.3 Y-54.07 E.01648 G1 X8.295 Y-54.07 E.61809 G1 X8.774 Y-54.034 E.01788 G1 X9.222 Y-53.93 E.01716 G1 X9.782 Y-53.693 E.02263 G1 X10.267 Y-53.383 E.02143 G1 X10.583 Y-53.096 E.0159 G1 X10.839 Y-52.787 E.01495 G1 X11.048 Y-52.449 E.0148 G1 X11.28 Y-51.879 E.0229 G1 X11.392 Y-51.367 E.01953 G1 X11.421 Y-50.933 E.01623 G1 X11.421 Y-41.074 E.3672 G1 X11.386 Y-40.594 E.01792 G1 X11.279 Y-40.127 E.01786 G1 X11.022 Y-39.527 E.02429 G1 X10.745 Y-39.099 E.01901 G1 X10.459 Y-38.78 E.01596 G1 X10.14 Y-38.513 E.01548 G1 X9.745 Y-38.275 E.01717 G1 X9.166 Y-38.052 E.02311 G1 X8.741 Y-37.961 E.01619 G1 X8.3 Y-37.93 E.01648 G1 X-8.286 Y-37.929 E.61776 G1 X-8.72 Y-37.961 E.01619 G1 X-8.685 Y-38.417 F30000 G1 F3000 G1 X-9.01 Y-38.485 E.01237 G1 X-9.562 Y-38.711 E.02221 G1 X-9.983 Y-38.979 E.0186 G1 X-10.233 Y-39.203 E.0125 G1 X-10.457 Y-39.468 E.01292 G1 X-10.67 Y-39.823 E.01541 G1 X-10.837 Y-40.243 E.01685 G1 X-10.933 Y-40.668 E.01623 G1 X-10.963 Y-41.06 E.01464 G1 X-10.963 Y-50.934 E.36778 G1 X-10.933 Y-51.335 E.01495 G1 X-10.865 Y-51.66 E.01238 G1 X-10.639 Y-52.212 E.02221 G1 X-10.371 Y-52.633 E.0186 G1 X-10.147 Y-52.883 E.0125 G1 X-9.882 Y-53.107 E.0129 G1 X-9.532 Y-53.317 E.0152 G1 X-9.045 Y-53.505 E.01944 G1 X-8.667 Y-53.586 E.0144 G1 X-8.279 Y-53.613 E.0145 G1 X8.272 Y-53.613 E.61647 G1 X8.694 Y-53.582 E.01574 G1 X9.091 Y-53.489 E.01521 G1 X9.578 Y-53.281 E.01971 G1 X9.997 Y-53.011 E.01856 G1 X10.258 Y-52.772 E.01319 G1 X10.461 Y-52.527 E.01184 G1 X10.633 Y-52.251 E.0121 G1 X10.837 Y-51.754 E.02001 G1 X10.939 Y-51.292 E.01762 G1 X10.964 Y-50.913 E.01417 G1 X10.964 Y-41.095 E.36566 G1 X10.934 Y-40.672 E.01579 G1 X10.838 Y-40.258 E.01585 G1 X10.611 Y-39.734 E.02128 G1 X10.373 Y-39.369 E.01621 G1 X10.147 Y-39.117 E.01262 G1 X9.882 Y-38.893 E.0129 G1 X9.532 Y-38.683 E.0152 G1 X9.045 Y-38.495 E.01944 G1 X8.667 Y-38.414 E.0144 G1 X8.279 Y-38.387 E.0145 G1 X-8.264 Y-38.386 E.61617 G1 X-8.645 Y-38.414 E.01421 G1 X-8.587 Y-38.878 F30000 G1 F3000 G1 X-8.761 Y-38.899 E.00652 G1 X-9.003 Y-38.962 E.00932 G1 X-9.47 Y-39.185 E.01928 G1 X-9.63 Y-39.29 E.00712 G1 X-10.038 Y-39.695 E.0214 G1 X-10.268 Y-40.061 E.01612 G1 X-10.445 Y-40.545 E.0192 G1 X-10.501 Y-40.957 E.01548 G1 X-10.491 Y-51.145 E.37948 G1 X-10.397 Y-51.623 E.01812 G1 X-10.249 Y-51.983 E.0145 G1 X-10.099 Y-52.216 E.01035 G1 X-9.784 Y-52.576 E.0178 G1 X-9.416 Y-52.85 E.0171 G1 X-9.073 Y-53.014 E.01414 G1 X-8.701 Y-53.116 E.01438 G1 X-8.315 Y-53.157 E.01444 G1 X8.309 Y-53.157 E.6192 G1 X8.761 Y-53.101 E.01694 G1 X9.003 Y-53.038 E.00932 G1 X9.47 Y-52.815 E.01928 G1 X9.63 Y-52.71 E.00712 G1 X10.038 Y-52.305 E.0214 G1 X10.268 Y-51.939 E.01612 G1 X10.444 Y-51.455 E.01917 G1 X10.507 Y-50.963 E.0185 G1 X10.507 Y-41.041 E.36955 G1 X10.451 Y-40.589 E.01694 G1 X10.388 Y-40.347 E.00932 G1 X10.165 Y-39.88 E.01928 G1 X10.06 Y-39.72 E.00712 G1 X9.655 Y-39.312 E.0214 G1 X9.289 Y-39.082 E.01612 G1 X8.805 Y-38.906 E.01917 G1 X8.313 Y-38.843 E.0185 G1 X-8.309 Y-38.843 E.6191 G1 X-8.547 Y-38.873 E.00894 G1 X-8.486 Y-39.323 F30000 G1 F3000 G1 X-8.706 Y-39.353 E.00828 G1 X-8.89 Y-39.405 E.00712 G1 X-9.271 Y-39.596 E.01588 G1 X-9.375 Y-39.669 E.00473 G1 X-9.652 Y-39.939 E.0144 G1 X-9.839 Y-40.218 E.01252 G1 X-9.991 Y-40.6 E.01529 G1 X-10.05 Y-41.029 E.01614 G1 X-10.043 Y-51.055 E.37345 G1 X-9.973 Y-51.452 E.015 G1 X-9.866 Y-51.734 E.01124 G1 X-9.751 Y-51.92 E.00812 G1 X-9.511 Y-52.209 E.01401 G1 X-9.219 Y-52.438 E.01381 G1 X-8.952 Y-52.573 E.01117 G1 X-8.658 Y-52.661 E.01142 G1 X-8.323 Y-52.7 E.01257 G1 X8.318 Y-52.7 E.61979 G1 X8.706 Y-52.647 E.01459 G1 X8.89 Y-52.595 E.00712 G1 X9.271 Y-52.404 E.01588 G1 X9.375 Y-52.331 E.00473 G1 X9.652 Y-52.061 E.01439 G1 X9.839 Y-51.782 E.01252 G1 X9.991 Y-51.4 E.01529 G1 X10.05 Y-50.971 E.01614 G1 X10.05 Y-41.032 E.37019 G1 X9.997 Y-40.644 E.01459 G1 X9.945 Y-40.46 E.00712 G1 X9.754 Y-40.079 E.01588 G1 X9.681 Y-39.975 E.00473 G1 X9.411 Y-39.698 E.0144 G1 X9.132 Y-39.511 E.01252 G1 X8.75 Y-39.359 E.01529 G1 X8.321 Y-39.3 E.01614 G1 X-8.318 Y-39.3 E.61974 G1 X-8.446 Y-39.318 E.00483 G1 X-8.377 Y-39.765 F30000 G1 F3000 G1 X-8.644 Y-39.806 E.01003 G1 X-8.762 Y-39.843 E.00461 G1 X-9.063 Y-40.003 E.01271 G1 X-9.273 Y-40.194 E.01056 G1 X-9.421 Y-40.403 E.00955 G1 X-9.513 Y-40.6 E.00811 G1 X-9.556 Y-40.742 E.00551 G1 X-9.593 Y-41.019 E.01044 G1 X-9.593 Y-50.977 E.37088 G1 X-9.544 Y-51.295 E.01198 G1 X-9.472 Y-51.503 E.00819 G1 X-9.406 Y-51.621 E.00504 G1 X-9.154 Y-51.925 E.0147 G1 X-8.947 Y-52.071 E.00943 G1 X-8.75 Y-52.163 E.00811 G1 X-8.608 Y-52.206 E.00551 G1 X-8.331 Y-52.243 E.01044 G1 X8.327 Y-52.243 E.62043 G1 X8.644 Y-52.194 E.01192 G1 X8.762 Y-52.157 E.00461 G1 X9.063 Y-51.997 E.01271 G1 X9.273 Y-51.806 E.01056 G1 X9.421 Y-51.597 E.00955 G1 X9.513 Y-51.4 E.0081 G1 X9.556 Y-51.258 E.00551 G1 X9.593 Y-50.981 E.01044 G1 X9.593 Y-41.023 E.37088 G1 X9.544 Y-40.706 E.01192 G1 X9.507 Y-40.588 E.00461 G1 X9.347 Y-40.287 E.01271 G1 X9.156 Y-40.077 E.01056 G1 X8.947 Y-39.929 E.00955 G1 X8.75 Y-39.837 E.0081 G1 X8.608 Y-39.794 E.00551 G1 X8.331 Y-39.757 E.01044 G1 X-8.327 Y-39.757 E.62043 G1 X-8.338 Y-39.759 E.00041 G1 X-8.338 Y-40.214 F30000 G1 F3000 G1 X-8.568 Y-40.257 E.00872 G1 X-8.759 Y-40.344 E.00783 G1 X-8.911 Y-40.473 E.00743 G1 X-9.002 Y-40.586 E.00541 G1 X-9.104 Y-40.803 E.00892 G1 X-9.136 Y-41.011 E.00781 G1 X-9.136 Y-50.988 E.37161 G1 X-9.093 Y-51.221 E.00884 G1 X-9.046 Y-51.34 E.00475 G1 X-8.877 Y-51.561 E.01037 G1 X-8.764 Y-51.652 E.00541 G1 X-8.547 Y-51.754 E.00892 G1 X-8.339 Y-51.786 E.00781 G1 X8.338 Y-51.786 E.62116 G1 X8.568 Y-51.743 E.00871 G1 X8.759 Y-51.656 E.00783 G1 X8.911 Y-51.527 E.00743 G1 X9.002 Y-51.414 E.00541 G1 X9.104 Y-51.197 E.00892 G1 X9.136 Y-50.989 E.00782 G1 X9.136 Y-41.012 E.37161 G1 X9.093 Y-40.782 E.00872 G1 X9.006 Y-40.591 E.00783 G1 X8.877 Y-40.439 E.00743 G1 X8.764 Y-40.348 E.00541 G1 X8.547 Y-40.246 E.00892 G1 X8.339 Y-40.214 E.00782 G1 X-8.298 Y-40.214 E.61967 G1 X-8.298 Y-40.671 F30000 G1 F3000 G1 X-8.35 Y-40.671 E.00195 G1 X-8.461 Y-40.7 E.00426 G1 X-8.545 Y-40.747 E.00361 G1 X-8.654 Y-40.884 E.00652 G1 X-8.679 Y-41 E.00442 G1 X-8.679 Y-51 E.37246 G1 X-8.65 Y-51.111 E.00426 G1 X-8.603 Y-51.195 E.00361 G1 X-8.466 Y-51.304 E.00652 G1 X-8.35 Y-51.329 E.00442 G1 X8.35 Y-51.329 E.62201 G1 X8.461 Y-51.3 E.00426 G1 X8.545 Y-51.253 E.00361 G1 X8.654 Y-51.116 E.00652 G1 X8.679 Y-51 E.00442 G1 X8.679 Y-41 E.37246 G1 X8.65 Y-40.889 E.00426 G1 X8.603 Y-40.805 E.00361 G1 X8.466 Y-40.696 E.00652 G1 X8.35 Y-40.671 E.00442 G1 X-8.258 Y-40.671 E.61857 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-8.35 Y-40.671 G1 X-8.461 Y-40.7 G1 X-8.545 Y-40.747 G1 X-8.654 Y-40.884 G1 X-8.679 Y-41 G1 X-8.679 Y-42.403 ;WIPE_END G1 X-1.06 Y-41.943 Z.6 F30000 G1 X7.95 Y-41.4 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-7.95 Y-41.4 E.59221 G1 X-7.95 Y-50.6 E.34267 G1 X7.95 Y-50.6 E.59221 G1 X7.95 Y-41.44 E.34118 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X5.95 Y-41.435 ;WIPE_END G1 X1.05 Y-42.6 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Inner wall G1 F3000 G1 X1.05 Y-50.1 E.27935 G1 X7.45 Y-50.1 E.23838 G1 X7.45 Y-41.9 E.30542 M73 P5 R103 G1 X1.05 Y-41.9 E.23838 G1 X1.05 Y-42.56 E.02458 G1 X1.507 Y-42.6 F30000 G1 F3000 G1 X1.507 Y-42.643 E.0016 G1 X6.207 Y-42.643 E.17506 G1 X6.207 Y-49.357 E.25008 G1 X1.507 Y-49.357 E.17506 G1 X1.507 Y-49.643 E.01065 G1 X6.993 Y-49.643 E.20433 G1 X6.993 Y-42.357 E.27137 G1 X1.507 Y-42.357 E.20433 G1 X1.507 Y-42.56 E.00756 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X1.507 Y-42.643 G1 X3.424 Y-42.643 ;WIPE_END G1 X2.45 Y-43.6 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X2.45 Y-48.4 E.17878 G1 X5.25 Y-48.4 E.10429 G1 X5.25 Y-43.6 E.17878 G1 X2.49 Y-43.6 E.1028 G1 X1.95 Y-43.6 F30000 ;TYPE:Inner wall G1 F3000 G1 X1.95 Y-48.9 E.1974 G1 X5.75 Y-48.9 E.14154 G1 X5.75 Y-43.1 E.21603 G1 X1.95 Y-43.1 E.14154 G1 X1.95 Y-43.56 E.01713 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X1.95 Y-45.56 ;WIPE_END G1 X-5.085 Y-42.6 Z.6 F30000 G1 X-6.75 Y-41.9 Z.6 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X-7.45 Y-41.9 E.02607 G1 X-7.45 Y-50.1 E.30542 G1 X-6.75 Y-50.1 E.02607 G1 X-6.75 Y-41.94 E.30393 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-7.45 Y-41.9 G1 X-7.45 Y-43.199 ;WIPE_END G1 X.161 Y-42.629 Z.6 F30000 G1 X.55 Y-42.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X-6.25 Y-42.6 E.25327 G1 X-6.25 Y-49.4 E.25327 G1 X.55 Y-49.4 E.25327 G1 X.55 Y-42.64 E.25178 G1 X.8 Y-42 F30000 ;TYPE:Gap infill ;WIDTH:0.74292 G1 F3000 G1 X-6.5 Y-42 E.4164 G1 X-7.1 Y-42.129 F30000 ;WIDTH:0.28584 G1 F3000 G1 X-7.1 Y-49.871 E.15327 G1 X-6.5 Y-50 F30000 ;WIDTH:0.74292 G1 F3000 G1 X.8 Y-50 E.4164 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-1.2 Y-50 ;WIPE_END G1 X1.5 Y-49.129 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.485842 G1 F3000 G1 X1.5 Y-42.871 E.22583 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X1.5 Y-44.871 ;WIPE_END G1 X6.6 Y-42.586 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.371682 G1 F3000 G1 X6.6 Y-49.414 E.18294 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X6.6 Y-47.414 ;WIPE_END G1 X12.522 Y-42.599 Z.6 F30000 G1 X69.55 Y3.776 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Brim ;WIDTH:0.5 G1 F3000 G1 X69.976 Y3.297 E.02386 G1 X70.469 Y2.886 E.0239 G1 X71.014 Y2.553 E.02378 G1 X71.852 Y2.227 E.0335 G1 X72.479 Y2.096 E.02386 G1 X73.058 Y2.058 E.02159 G1 X91.942 Y2.058 E.70336 G1 X92.59 Y2.106 E.02422 G1 X93.213 Y2.246 E.02377 G1 X94.056 Y2.603 E.03411 G1 X94.674 Y3 E.02737 G1 X95.153 Y3.426 E.02386 G1 X95.564 Y3.919 E.0239 G1 X95.897 Y4.464 E.0238 G1 X96.208 Y5.25 E.03148 G1 X96.354 Y5.93 E.02589 G1 X96.392 Y6.508 E.02157 G1 X96.392 Y16.492 E.37187 G1 X96.344 Y17.14 E.02422 G1 X96.204 Y17.763 E.02377 G1 X95.847 Y18.606 E.03411 G1 X95.45 Y19.224 E.02737 G1 X95.024 Y19.703 E.02386 G1 X94.531 Y20.114 E.0239 G1 X93.986 Y20.447 E.0238 G1 X93.2 Y20.758 E.03148 G1 X92.52 Y20.904 E.02589 G1 X91.942 Y20.942 E.02157 G1 X79.058 Y20.942 E.47988 G1 X78.867 Y21.046 E.0081 G1 X78.751 Y21.224 E.00792 G1 X78.324 Y21.703 E.0239 G1 X77.831 Y22.114 E.0239 G1 X77.286 Y22.447 E.0238 G1 X76.5 Y22.758 E.03148 G1 X75.82 Y22.904 E.02589 G1 X75.242 Y22.942 E.02157 G1 X73.058 Y22.942 E.08135 G1 X72.41 Y22.894 E.02422 G1 X71.789 Y22.754 E.02373 G1 X70.861 Y22.351 E.03766 G1 X70.326 Y22.001 E.02381 G1 X69.847 Y21.574 E.0239 G1 X69.436 Y21.081 E.0239 G1 X69.103 Y20.536 E.0238 G1 X68.792 Y19.75 E.03148 G1 X68.646 Y19.07 E.02589 G1 X68.608 Y18.492 E.02157 G1 X68.608 Y6.508 E.44636 G1 X68.656 Y5.86 E.02422 G1 X68.796 Y5.237 E.02377 G1 X69.153 Y4.394 E.03411 G1 X69.528 Y3.809 E.02588 G1 X69.91 Y4.062 F30000 G1 F3000 G1 X70.303 Y3.62 E.02203 G1 X70.744 Y3.253 E.02138 G1 X71.228 Y2.96 E.02108 G1 X71.994 Y2.664 E.03055 G1 X72.532 Y2.552 E.02048 G1 X73.068 Y2.515 E.02002 G1 X91.93 Y2.515 E.70252 G1 X92.532 Y2.561 E.02251 G1 X93.083 Y2.688 E.02106 G1 X93.831 Y3.005 E.03025 G1 X94.405 Y3.373 E.02541 G1 X94.83 Y3.753 E.02123 G1 X95.185 Y4.178 E.02062 G1 X95.48 Y4.659 E.02102 G1 X95.765 Y5.373 E.02862 G1 X95.898 Y5.983 E.02329 G1 X95.935 Y6.527 E.0203 G1 X95.935 Y16.47 E.37032 G1 X95.892 Y17.062 E.02214 G1 X95.762 Y17.633 E.02181 G1 X95.445 Y18.381 E.03025 G1 X95.09 Y18.938 E.02461 G1 X94.697 Y19.38 E.02203 G1 X94.256 Y19.747 E.02138 G1 X93.77 Y20.041 E.02114 G1 X93.077 Y20.315 E.02775 G1 X92.447 Y20.451 E.02403 G1 X91.923 Y20.485 E.01956 G1 X79.075 Y20.485 E.47852 G1 X78.826 Y20.548 E.00959 G1 X78.665 Y20.635 E.00683 G1 X78.475 Y20.81 E.00959 G1 X78.38 Y20.953 E.0064 G1 X77.997 Y21.38 E.02137 G1 X77.572 Y21.735 E.02062 G1 X77.091 Y22.03 E.02102 G1 X76.377 Y22.315 E.02862 G1 X75.747 Y22.451 E.02403 G1 X75.223 Y22.485 E.01956 G1 X73.08 Y22.485 E.0798 G1 X72.468 Y22.439 E.02289 G1 X71.919 Y22.312 E.02096 G1 X71.09 Y21.952 E.03369 G1 X70.597 Y21.63 E.02191 G1 X70.17 Y21.247 E.02137 G1 X69.803 Y20.806 E.02138 G1 X69.509 Y20.32 E.02114 G1 X69.235 Y19.627 E.02775 G1 X69.099 Y18.997 E.02403 G1 X69.065 Y18.473 E.01956 G1 X69.065 Y6.53 E.44481 G1 X69.108 Y5.938 E.02214 G1 X69.23 Y5.39 E.0209 G1 X69.555 Y4.619 E.03116 G1 X69.888 Y4.095 E.02312 G1 X70.275 Y4.342 F30000 G1 F3000 G1 X70.283 Y4.33 E.00052 G1 X70.614 Y3.957 E.01859 G1 X71.002 Y3.633 E.01882 G1 X71.442 Y3.368 E.01913 G1 X72.113 Y3.108 E.02681 G1 X72.585 Y3.008 E.01798 G1 X73.088 Y2.972 E.01879 G1 X91.907 Y2.972 E.70092 G1 X92.453 Y3.014 E.0204 G1 X92.953 Y3.129 E.01911 G1 X93.606 Y3.406 E.02643 G1 X94.136 Y3.745 E.02343 G1 X94.507 Y4.079 E.01858 G1 X94.818 Y4.454 E.01814 G1 X95.064 Y4.854 E.01752 G1 X95.322 Y5.496 E.02577 G1 X95.445 Y6.058 E.02142 G1 X95.478 Y6.547 E.01827 G1 X95.478 Y16.448 E.36875 G1 X95.439 Y16.984 E.02004 G1 X95.321 Y17.504 E.01984 G1 X95.033 Y18.177 E.02728 G1 X94.717 Y18.67 E.0218 G1 X94.386 Y19.043 E.01859 G1 X93.998 Y19.367 E.01882 G1 X93.556 Y19.634 E.01924 G1 X92.955 Y19.872 E.02407 G1 X92.393 Y19.995 E.02141 G1 X91.912 Y20.028 E.01795 G1 X79.084 Y20.028 E.47781 G1 X78.958 Y20.044 E.00472 G1 X78.6 Y20.152 E.01394 G1 X78.346 Y20.308 E.01112 G1 X78.175 Y20.465 E.00864 G1 X78.011 Y20.679 E.01004 G1 X77.671 Y21.057 E.01893 G1 X77.296 Y21.368 E.01814 G1 X76.896 Y21.614 E.01752 G1 X76.232 Y21.879 E.02659 G1 X75.693 Y21.995 E.02055 G1 X75.212 Y22.028 E.01795 G1 X73.093 Y22.028 E.07895 G1 X72.547 Y21.986 E.02038 G1 X72.075 Y21.879 E.01801 G1 X71.318 Y21.552 E.03072 G1 X70.885 Y21.272 E.01922 G1 X70.507 Y20.936 E.01883 G1 X70.183 Y20.548 E.01884 G1 X69.916 Y20.106 E.01924 G1 X69.678 Y19.505 E.02407 G1 X69.555 Y18.943 E.02141 G1 X69.522 Y18.462 E.01795 G1 X69.522 Y6.542 E.44398 G1 X69.561 Y6.015 E.01971 G1 X69.665 Y5.541 E.01804 G1 X69.956 Y4.842 E.0282 G1 X70.254 Y4.375 E.02062 G1 X70.641 Y4.622 F30000 G1 F3000 G1 X70.656 Y4.598 E.00104 G1 X70.941 Y4.28 E.01592 G1 X71.26 Y4.013 E.01548 G1 X71.655 Y3.775 E.01717 G1 X72.234 Y3.552 E.02311 G1 X72.659 Y3.461 E.01619 G1 X73.109 Y3.429 E.01682 G1 X91.884 Y3.429 E.6993 G1 X92.374 Y3.466 E.01827 G1 X92.822 Y3.57 E.01716 G1 X93.382 Y3.807 E.02263 G1 X93.867 Y4.117 E.02143 G1 X94.183 Y4.404 E.0159 G1 X94.439 Y4.713 E.01495 G1 X94.648 Y5.051 E.0148 G1 X94.88 Y5.621 E.0229 G1 X94.992 Y6.133 E.01953 G1 X95.021 Y6.567 E.01623 G1 X95.021 Y16.426 E.3672 G1 X94.986 Y16.906 E.01792 G1 X94.879 Y17.373 E.01786 G1 X94.622 Y17.973 E.02429 G1 X94.345 Y18.401 E.01901 G1 X94.059 Y18.72 E.01596 G1 X93.74 Y18.987 E.01549 G1 X93.341 Y19.227 E.01732 G1 X92.831 Y19.429 E.02044 G1 X92.338 Y19.539 E.01881 G1 X91.901 Y19.57 E.01631 G1 X79.091 Y19.571 E.47714 G1 X78.91 Y19.589 E.00676 G1 X78.475 Y19.712 E.01684 G1 X78.116 Y19.913 E.01534 G1 X77.87 Y20.125 E.01209 G1 X77.346 Y20.733 E.0299 G1 X77.037 Y20.989 E.01495 G1 X76.7 Y21.198 E.01477 G1 X76.087 Y21.442 E.02456 G1 X75.639 Y21.539 E.0171 G1 X75.201 Y21.57 E.01633 G1 X73.105 Y21.57 E.07809 G1 X72.625 Y21.534 E.01791 G1 X72.23 Y21.446 E.01508 G1 X71.545 Y21.153 E.02775 G1 X71.171 Y20.913 E.01653 G1 X70.844 Y20.624 E.01627 G1 X70.563 Y20.29 E.01626 G1 X70.323 Y19.891 E.01732 G1 X70.121 Y19.381 E.02044 G1 X70.011 Y18.888 E.01881 G1 X69.98 Y18.451 E.01631 G1 X69.98 Y6.554 E.44313 G1 X70.014 Y6.09 E.01731 G1 X70.1 Y5.692 E.0152 G1 X70.359 Y5.066 E.02522 G1 X70.619 Y4.655 E.0181 G1 X71.007 Y4.901 F30000 G1 F3000 G1 X71.029 Y4.867 E.00154 G1 X71.253 Y4.617 E.0125 G1 X71.518 Y4.393 E.0129 G1 X71.868 Y4.183 E.0152 G1 X72.355 Y3.995 E.01944 G1 X72.733 Y3.914 E.01439 G1 X73.13 Y3.886 E.01484 G1 X91.862 Y3.886 E.6977 G1 X92.294 Y3.918 E.01613 G1 X92.691 Y4.011 E.0152 G1 X93.178 Y4.219 E.01971 G1 X93.597 Y4.489 E.01856 G1 X93.858 Y4.728 E.01319 G1 X94.061 Y4.973 E.01184 G1 X94.233 Y5.249 E.0121 G1 X94.437 Y5.746 E.02001 G1 X94.539 Y6.208 E.01762 G1 X94.564 Y6.587 E.01417 G1 X94.564 Y16.405 E.36566 G1 X94.534 Y16.828 E.01579 G1 X94.438 Y17.242 E.01585 G1 X94.211 Y17.766 E.02128 G1 X93.973 Y18.131 E.01621 G1 X93.747 Y18.383 E.01262 G1 X93.482 Y18.607 E.01292 G1 X93.127 Y18.82 E.01541 G1 X92.707 Y18.987 E.01685 G1 X92.282 Y19.083 E.01623 G1 X91.88 Y19.113 E.015 G1 X79.097 Y19.114 E.47612 G1 X78.874 Y19.134 E.00833 G1 X78.364 Y19.269 E.01967 G1 X77.903 Y19.509 E.01934 G1 X77.517 Y19.835 E.01884 G1 X77.016 Y20.413 E.02849 G1 X76.777 Y20.611 E.01156 G1 X76.504 Y20.782 E.01201 G1 X75.942 Y21.006 E.02251 G1 X75.564 Y21.086 E.0144 G1 X75.19 Y21.113 E.01398 G1 X73.127 Y21.113 E.07683 G1 X72.702 Y21.081 E.01587 G1 X72.383 Y21.012 E.01217 G1 X71.77 Y20.752 E.0248 G1 X71.457 Y20.553 E.01384 G1 X71.179 Y20.31 E.01371 G1 X70.943 Y20.031 E.01363 G1 X70.73 Y19.677 E.01539 G1 X70.563 Y19.257 E.01685 G1 X70.467 Y18.832 E.01623 G1 X70.437 Y18.44 E.01464 G1 X70.437 Y6.566 E.44227 G1 X70.467 Y6.165 E.01495 G1 X70.535 Y5.84 E.01238 G1 X70.761 Y5.288 E.02221 G1 X70.985 Y4.935 E.01557 G1 X71.337 Y5.243 F30000 G1 F3000 G1 X71.616 Y4.924 E.01579 G1 X71.984 Y4.65 E.0171 G1 X72.327 Y4.486 E.01414 G1 X72.699 Y4.384 E.01438 G1 X73.085 Y4.343 E.01444 G1 X91.907 Y4.343 E.70107 G1 X92.482 Y4.431 E.02165 G1 X92.608 Y4.469 E.00489 G1 X92.995 Y4.641 E.01577 G1 X93.107 Y4.709 E.00488 G1 X93.505 Y5.037 E.01924 G1 X93.678 Y5.241 E.00995 G1 X93.819 Y5.462 E.00975 G1 X93.931 Y5.693 E.00956 G1 X94.021 Y5.945 E.00996 G1 X94.107 Y6.539 E.02237 G1 X94.107 Y16.457 E.36943 G1 X94.019 Y17.032 E.02165 G1 X93.981 Y17.158 E.00489 G1 X93.809 Y17.545 E.01577 G1 X93.741 Y17.657 E.00488 G1 X93.413 Y18.055 E.01924 G1 X93.209 Y18.228 E.00995 G1 X92.988 Y18.369 E.00975 G1 X92.757 Y18.481 E.00956 G1 X92.505 Y18.571 E.00996 G1 X91.911 Y18.657 E.02237 G1 X77.509 Y18.657 E.53643 G1 X77.405 Y18.705 E.00426 G1 X77.375 Y18.767 E.0026 G1 X77.324 Y19.02 E.00959 G1 X77.184 Y19.402 E.01518 G1 X76.971 Y19.763 E.01561 G1 X76.564 Y20.182 E.02176 G1 X76.21 Y20.409 E.01565 G1 X75.888 Y20.545 E.01302 G1 X75.604 Y20.615 E.01089 G1 X75.215 Y20.657 E.01458 G1 X73.093 Y20.657 E.07906 G1 X72.518 Y20.569 E.02165 G1 X72.392 Y20.531 E.00489 G1 X72.005 Y20.359 E.01577 G1 X71.893 Y20.291 E.00488 G1 X71.495 Y19.963 E.01924 G1 X71.322 Y19.759 E.00995 G1 X71.181 Y19.538 E.00975 G1 X71.069 Y19.307 E.00956 G1 X70.979 Y19.054 E.01002 G1 X70.898 Y18.537 E.01949 G1 X70.899 Y6.462 E.44973 G1 X70.97 Y6.001 E.0174 G1 X71.1 Y5.625 E.01481 G1 X71.305 Y5.279 E.01495 G1 X71.31 Y5.273 E.00032 G1 X71.662 Y5.565 F30000 G1 F3000 G1 X71.889 Y5.291 E.01325 G1 X72.181 Y5.062 E.01381 G1 X72.448 Y4.927 E.01117 G1 X72.742 Y4.839 E.01142 G1 X73.077 Y4.8 E.01257 G1 X91.918 Y4.8 E.70173 G1 X92.414 Y4.883 E.01875 G1 X92.817 Y5.062 E.01642 G1 X93.154 Y5.329 E.01602 G1 X93.295 Y5.491 E.00799 G1 X93.405 Y5.654 E.00732 G1 X93.524 Y5.899 E.01015 G1 X93.591 Y6.1 E.00786 G1 X93.65 Y6.529 E.01614 G1 X93.65 Y16.468 E.37019 G1 X93.567 Y16.964 E.01875 G1 X93.388 Y17.367 E.01642 G1 X93.121 Y17.704 E.01602 G1 X92.959 Y17.845 E.00799 G1 X92.796 Y17.955 E.00732 G1 X92.551 Y18.074 E.01015 G1 X92.35 Y18.141 E.00786 G1 X91.921 Y18.2 E.01614 G1 X77.081 Y18.2 E.55274 G1 X76.977 Y18.247 E.00426 G1 X76.944 Y18.335 E.00349 G1 X76.941 Y18.58 E.00913 G1 X76.899 Y18.852 E.01025 G1 X76.752 Y19.254 E.01595 G1 X76.64 Y19.447 E.00831 G1 X76.315 Y19.799 E.01783 G1 X76.033 Y19.988 E.01266 G1 X75.777 Y20.102 E.01042 G1 X75.56 Y20.161 E.0084 G1 X75.223 Y20.2 E.01264 G1 X73.082 Y20.2 E.07972 G1 X72.586 Y20.117 E.01875 G1 X72.183 Y19.938 E.01642 G1 X71.846 Y19.671 E.01602 G1 X71.705 Y19.509 E.00799 G1 X71.595 Y19.346 E.00732 G1 X71.476 Y19.101 E.01015 G1 X71.409 Y18.899 E.0079 G1 X71.355 Y18.547 E.01327 G1 X71.35 Y6.532 E.44751 G1 X71.403 Y6.144 E.01458 G1 X71.493 Y5.858 E.01116 G1 X71.639 Y5.598 E.01115 G1 X71.994 Y5.879 F30000 G1 F3000 G1 X72.246 Y5.575 E.0147 G1 X72.453 Y5.429 E.00943 G1 X72.65 Y5.337 E.00811 G1 X72.792 Y5.294 E.00551 G1 X73.069 Y5.257 E.01044 G1 X91.927 Y5.257 E.70238 G1 X92.239 Y5.305 E.01174 G1 X92.538 Y5.424 E.01202 G1 X92.801 Y5.62 E.0122 G1 X92.956 Y5.798 E.00878 G1 X93.019 Y5.899 E.00445 G1 X93.113 Y6.1 E.00826 G1 X93.156 Y6.242 E.00551 G1 X93.193 Y6.519 E.01044 G1 X93.193 Y16.477 E.37088 G1 X93.145 Y16.789 E.01174 G1 X93.026 Y17.088 E.01202 G1 X92.83 Y17.351 E.0122 G1 X92.652 Y17.506 E.00878 G1 X92.551 Y17.569 E.00445 G1 X92.35 Y17.663 E.00826 G1 X92.208 Y17.706 E.00551 G1 X91.931 Y17.743 E.01044 G1 X76.63 Y17.743 E.56989 G1 X76.526 Y17.79 E.00426 G1 X76.493 Y17.878 E.00349 G1 X76.483 Y18.584 E.02629 G1 X76.448 Y18.781 E.00746 G1 X76.324 Y19.093 E.01252 G1 X76.251 Y19.209 E.0051 G1 X76.056 Y19.423 E.01076 G1 X75.847 Y19.571 E.00955 G1 X75.65 Y19.663 E.0081 G1 X75.508 Y19.706 E.00551 G1 X75.231 Y19.743 E.01044 G1 X73.073 Y19.743 E.08036 G1 X72.761 Y19.695 E.01174 G1 X72.462 Y19.576 E.01202 G1 X72.199 Y19.38 E.0122 G1 X72.044 Y19.202 E.00878 G1 X71.981 Y19.101 E.00445 G1 X71.887 Y18.9 E.00826 G1 X71.844 Y18.758 E.00551 G1 X71.807 Y18.481 E.01044 G1 X71.807 Y6.523 E.44538 G1 X71.856 Y6.205 E.01198 G1 X71.928 Y5.997 E.00819 G1 X71.975 Y5.914 E.00355 G1 X72.354 Y6.16 F30000 G1 F3000 G1 X72.523 Y5.939 E.01037 G1 X72.636 Y5.848 E.00541 G1 X72.853 Y5.746 E.00892 G1 X73.061 Y5.714 E.00781 G1 X91.938 Y5.714 E.7031 G1 X92.168 Y5.757 E.00871 G1 X92.359 Y5.844 E.00783 G1 X92.511 Y5.973 E.00743 G1 X92.602 Y6.086 E.00541 G1 X92.704 Y6.303 E.00892 G1 X92.736 Y6.511 E.00782 G1 X92.736 Y16.488 E.37161 G1 X92.693 Y16.718 E.00872 G1 X92.606 Y16.909 E.00783 G1 X92.477 Y17.061 E.00743 G1 X92.364 Y17.152 E.00541 G1 X92.147 Y17.254 E.00892 G1 X91.939 Y17.286 E.00782 G1 X76.173 Y17.286 E.58725 G1 X76.069 Y17.333 E.00426 G1 X76.036 Y17.423 E.00355 G1 X76.036 Y18.491 E.0398 G1 X75.996 Y18.713 E.0084 G1 X75.906 Y18.909 E.00801 G1 X75.777 Y19.061 E.00743 G1 X75.664 Y19.152 E.00541 G1 X75.447 Y19.254 E.00892 G1 X75.239 Y19.286 E.00782 G1 X73.062 Y19.286 E.08109 G1 X72.832 Y19.243 E.00872 G1 X72.641 Y19.156 E.00783 G1 X72.489 Y19.027 E.00743 G1 X72.398 Y18.914 E.00541 G1 X72.296 Y18.697 E.00892 G1 X72.264 Y18.489 E.00781 G1 X72.264 Y6.512 E.4461 G1 X72.307 Y6.279 E.00884 G1 X72.339 Y6.198 E.00326 G1 X72.75 Y6.389 F30000 G1 F3000 G1 X72.797 Y6.305 E.00361 G1 X72.934 Y6.196 E.00652 G1 X73.05 Y6.171 E.00442 G1 X91.95 Y6.171 E.70395 G1 X92.061 Y6.2 E.00426 G1 X92.145 Y6.247 E.00361 G1 X92.254 Y6.384 E.00652 G1 X92.279 Y6.5 E.00442 G1 X92.279 Y16.5 E.37246 G1 X92.25 Y16.611 E.00426 G1 X92.203 Y16.695 E.00361 G1 X92.066 Y16.804 E.00652 G1 X91.95 Y16.829 E.00442 G1 X75.579 Y16.829 E.60977 G1 X75.579 Y18.5 E.06226 G1 X75.55 Y18.611 E.00426 G1 X75.503 Y18.695 E.00361 G1 X75.366 Y18.804 E.00652 G1 X75.25 Y18.829 E.00442 G1 X73.05 Y18.829 E.08194 G1 X72.939 Y18.8 E.00426 G1 X72.855 Y18.753 E.00361 G1 X72.746 Y18.616 E.00652 G1 X72.721 Y18.5 E.00442 G1 X72.721 Y6.5 E.44695 G1 X72.74 Y6.428 E.00277 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X72.797 Y6.305 G1 X72.934 Y6.196 G1 X73.05 Y6.171 G1 X74.62 Y6.171 ;WIPE_END G1 X74.797 Y13.802 Z.6 F30000 G1 X74.85 Y16.1 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X74.85 Y18.1 E.07449 G1 X73.45 Y18.1 E.05214 G1 X73.45 Y6.9 E.41716 G1 X91.55 Y6.9 E.67416 G1 X91.55 Y16.1 E.34267 G1 X74.89 Y16.1 E.62052 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X74.85 Y18.1 ;WIPE_END G1 X81.264 Y13.962 Z.6 F30000 G1 X90.35 Y8.1 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Inner wall G1 F3000 G1 X90.35 Y7.4 E.02607 G1 X91.05 Y7.4 E.02607 G1 X91.05 Y15.6 E.30542 G1 X90.35 Y15.6 E.02607 G1 X90.35 Y8.14 E.27786 G1 X89.85 Y8.1 F30000 ;TYPE:Outer wall G1 F3000 G1 X89.85 Y14.9 E.25327 G1 X83.05 Y14.9 E.25327 G1 X83.05 Y8.1 E.25327 G1 X89.81 Y8.1 E.25178 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X89.822 Y10.1 ;WIPE_END G1 X82.63 Y12.656 Z.6 F30000 G1 X74.35 Y15.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Inner wall G1 F3000 G1 X74.35 Y17.6 E.07449 G1 X73.95 Y17.6 E.0149 G1 X73.95 Y7.4 E.37991 G1 X82.55 Y7.4 E.32032 G1 X82.55 Y15.6 E.30542 G1 X74.39 Y15.6 E.30393 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X74.35 Y17.6 ;WIPE_END G1 X78.35 Y13.9 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X78.35 Y9.1 E.17878 G1 X81.15 Y9.1 E.10429 G1 X81.15 Y13.9 E.17878 G1 X78.39 Y13.9 E.1028 G1 X77.85 Y13.9 F30000 ;TYPE:Inner wall G1 F3000 G1 X77.85 Y8.6 E.1974 G1 X81.65 Y8.6 E.14154 G1 X81.65 Y14.4 E.21603 G1 X77.85 Y14.4 E.14154 G1 X77.85 Y13.94 E.01713 G1 X77.393 Y13.9 F30000 G1 F3000 G1 X77.393 Y14.857 E.03565 G1 X82.093 Y14.857 E.17506 G1 X82.093 Y15.143 E.01065 G1 X74.407 Y15.143 E.28627 G1 X74.407 Y7.857 E.27137 G1 X82.093 Y7.857 E.28627 G1 X82.093 Y8.143 E.01065 G1 X77.393 Y8.143 E.17506 G1 X77.393 Y13.86 E.21294 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X77.393 Y14.857 G1 X78.396 Y14.857 ;WIPE_END G1 X82.1 Y14.629 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.485838 G1 F3000 G1 X82.1 Y8.371 E.22583 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X82.1 Y10.371 ;WIPE_END G1 X82.8 Y7.5 Z.6 F30000 G1 Z.2 G1 E.8 F1800 ;WIDTH:0.74292 G1 F3000 G1 X90.1 Y7.5 E.4164 G1 X90.7 Y7.629 F30000 ;WIDTH:0.285842 G1 F3000 G1 X90.7 Y15.371 E.15327 G1 X90.1 Y15.5 F30000 ;WIDTH:0.74292 G1 F3000 G1 X82.8 Y15.5 E.4164 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X84.8 Y15.5 ;WIPE_END G1 X79.085 Y10.441 Z.6 F30000 G1 X76.32 Y7.994 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Bottom surface ;WIDTH:0.505584 G1 F4800 G1 X77.05 Y8.724 E.03893 G1 X77.05 Y9.379 E.02467 G1 X75.871 Y8.2 E.06285 G1 X75.217 Y8.2 E.02467 G1 X77.05 Y10.033 E.09773 G1 X77.05 Y10.687 E.02467 G1 X74.75 Y8.387 E.12264 G1 X74.75 Y9.041 E.02467 G1 X77.05 Y11.342 E.12264 G1 X77.05 Y11.996 E.02467 G1 X74.75 Y9.696 E.12264 G1 X74.75 Y10.35 E.02467 G1 X77.05 Y12.65 E.12264 G1 X77.05 Y13.304 E.02467 G1 X74.75 Y11.004 E.12264 G1 X74.75 Y11.659 E.02467 G1 X77.05 Y13.959 E.12264 G1 X77.05 Y14.613 E.02467 G1 X74.75 Y12.313 E.12264 G1 X74.75 Y12.967 E.02467 G1 X76.583 Y14.8 E.09773 G1 X75.929 Y14.8 E.02467 G1 X74.75 Y13.621 E.06284 G1 X74.75 Y14.276 E.02467 G1 X75.48 Y15.006 E.03892 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X74.75 Y14.276 G1 X74.75 Y13.621 G1 X74.971 Y13.843 ;WIPE_END G1 X67.365 Y14.478 Z.6 F30000 G1 X61.042 Y15.006 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Brim ;WIDTH:0.5 G1 F3000 G1 X61.042 Y34.436 E.72369 G1 X61.119 Y34.607 E.00697 G1 X61.253 Y34.726 E.00669 G1 X61.664 Y35.219 E.0239 G1 X61.997 Y35.764 E.02378 G1 X62.323 Y36.602 E.0335 G1 X62.454 Y37.229 E.02386 G1 X62.492 Y37.808 E.02159 G1 X62.492 Y39.392 E.059 G1 X62.444 Y40.04 E.02422 G1 X62.304 Y40.663 E.02377 G1 X61.947 Y41.506 E.03411 G1 X61.55 Y42.124 E.02737 G1 X61.124 Y42.603 E.02386 G1 X60.631 Y43.014 E.0239 G1 X60.086 Y43.347 E.0238 G1 X59.3 Y43.658 E.03148 G1 X58.62 Y43.804 E.02589 G1 X58.042 Y43.842 E.02157 G1 X52.058 Y43.842 E.22288 G1 X51.41 Y43.794 E.02422 G1 X50.787 Y43.654 E.02377 G1 X49.944 Y43.297 E.03411 G1 X49.326 Y42.9 E.02737 G1 X48.847 Y42.474 E.02386 G1 X48.436 Y41.981 E.0239 G1 X48.103 Y41.436 E.02378 G1 X47.777 Y40.598 E.0335 G1 X47.646 Y39.971 E.02386 G1 X47.608 Y39.392 E.02159 G1 X47.608 Y37.808 E.059 G1 X47.656 Y37.16 E.02422 G1 X47.796 Y36.539 E.02373 G1 X48.199 Y35.611 E.03766 G1 X48.549 Y35.077 E.0238 G1 X48.999 Y34.574 E.02513 G1 X49.058 Y34.422 E.00608 G1 X49.058 Y-14.392 E1.81811 G1 X49.106 Y-15.04 E.02422 G1 X49.246 Y-15.663 E.02377 G1 X49.603 Y-16.506 E.03411 G1 X50 Y-17.124 E.02737 G1 X50.426 Y-17.603 E.02386 G1 X50.919 Y-18.014 E.0239 G1 X51.464 Y-18.347 E.0238 G1 X52.25 Y-18.658 E.03148 G1 X52.93 Y-18.804 E.02589 G1 X53.508 Y-18.842 E.02157 G1 X56.592 Y-18.842 E.11487 G1 X57.24 Y-18.794 E.02422 G1 X57.863 Y-18.654 E.02377 G1 X58.706 Y-18.297 E.03411 G1 X59.324 Y-17.9 E.02737 G1 X59.803 Y-17.474 E.02386 G1 X60.214 Y-16.981 E.0239 G1 X60.547 Y-16.436 E.0238 G1 X60.858 Y-15.65 E.03148 G1 X61.004 Y-14.97 E.02589 G1 X61.042 Y-14.392 E.02157 G1 X61.042 Y14.966 E1.09348 G1 X60.585 Y14.966 F30000 G1 F3000 G1 X60.585 Y34.421 E.72464 G1 X60.631 Y34.636 E.00818 G1 X60.696 Y34.78 E.00589 G1 X60.826 Y34.958 E.00818 G1 X60.93 Y35.053 E.00526 G1 X61.285 Y35.478 E.02062 G1 X61.579 Y35.957 E.02093 G1 X61.886 Y36.744 E.03145 G1 X61.998 Y37.282 E.02048 G1 X62.035 Y37.827 E.02036 G1 X62.035 Y39.37 E.05745 G1 X61.992 Y39.962 E.02214 G1 X61.862 Y40.533 E.02181 G1 X61.545 Y41.281 E.03025 G1 X61.177 Y41.855 E.02541 G1 X60.797 Y42.28 E.02123 G1 X60.356 Y42.647 E.02138 G1 X59.87 Y42.941 E.02114 G1 X59.177 Y43.215 E.02775 G1 X58.567 Y43.348 E.02329 G1 X58.023 Y43.385 E.0203 G1 X52.08 Y43.385 E.22133 G1 X51.488 Y43.342 E.02214 G1 X50.917 Y43.212 E.02181 G1 X50.169 Y42.895 E.03025 G1 X49.612 Y42.54 E.02461 G1 X49.17 Y42.147 E.02203 G1 X48.803 Y41.706 E.02138 G1 X48.51 Y41.222 E.02108 G1 X48.214 Y40.456 E.03055 G1 X48.102 Y39.918 E.02048 G1 X48.065 Y39.382 E.02002 G1 X48.065 Y37.82 E.05816 G1 X48.108 Y37.238 E.02176 G1 X48.23 Y36.694 E.02075 G1 X48.609 Y35.819 E.03551 G1 X48.92 Y35.348 E.02101 G1 X49.331 Y34.889 E.02298 G1 X49.431 Y34.726 E.00711 G1 X49.48 Y34.597 E.00515 G1 X49.515 Y34.409 E.00711 G1 X49.515 Y-14.37 E1.81682 G1 X49.558 Y-14.962 E.02214 G1 X49.688 Y-15.533 E.02181 G1 X50.005 Y-16.281 E.03025 G1 X50.36 Y-16.838 E.02461 G1 X50.753 Y-17.28 E.02203 G1 X51.194 Y-17.647 E.02138 G1 X51.68 Y-17.941 E.02114 G1 X52.373 Y-18.215 E.02775 G1 X53.003 Y-18.351 E.02403 G1 X53.527 Y-18.385 E.01956 G1 X56.58 Y-18.385 E.1137 G1 X57.182 Y-18.339 E.02251 G1 X57.733 Y-18.212 E.02106 G1 X58.481 Y-17.895 E.03025 G1 X59.055 Y-17.527 E.02541 G1 X59.48 Y-17.147 E.02123 G1 X59.835 Y-16.722 E.02062 G1 X60.13 Y-16.241 E.02102 G1 X60.415 Y-15.527 E.02862 G1 X60.551 Y-14.897 E.02403 G1 X60.585 Y-14.373 E.01956 G1 X60.585 Y14.926 E1.09126 G1 X60.128 Y14.926 F30000 G1 F3000 G1 X60.128 Y34.409 E.72569 G1 X60.183 Y34.723 E.01186 G1 X60.276 Y34.959 E.00945 G1 X60.455 Y35.225 E.01194 G1 X60.904 Y35.735 E.0253 G1 X61.162 Y36.15 E.01821 G1 X61.448 Y36.885 E.02938 G1 X61.545 Y37.354 E.01782 G1 X61.578 Y37.847 E.01842 G1 X61.578 Y39.348 E.05588 G1 X61.539 Y39.884 E.02004 G1 X61.421 Y40.404 E.01984 G1 X61.144 Y41.056 E.0264 G1 X60.805 Y41.586 E.02343 G1 X60.471 Y41.957 E.01857 G1 X60.081 Y42.279 E.01884 G1 X59.656 Y42.534 E.01848 G1 X59.033 Y42.779 E.02492 G1 X58.512 Y42.892 E.01986 G1 X58.003 Y42.928 E.01902 G1 X52.102 Y42.928 E.21977 G1 X51.566 Y42.889 E.02004 G1 X51.046 Y42.771 E.01984 G1 X50.393 Y42.494 E.02643 G1 X49.897 Y42.181 E.02183 G1 X49.493 Y41.821 E.02017 G1 X49.171 Y41.431 E.01881 G1 X48.918 Y41.008 E.01837 G1 X48.652 Y40.315 E.02764 G1 X48.555 Y39.846 E.01785 G1 X48.522 Y39.362 E.01809 G1 X48.523 Y37.832 E.05696 G1 X48.561 Y37.315 E.01933 G1 X48.663 Y36.849 E.01777 G1 X49.019 Y36.028 E.03332 G1 X49.277 Y35.637 E.01745 G1 X49.665 Y35.202 E.02171 G1 X49.815 Y34.973 E.0102 G1 X49.931 Y34.67 E.01208 G1 X49.972 Y34.399 E.0102 G1 X49.972 Y-14.348 E1.81563 G1 X50.011 Y-14.884 E.02004 G1 X50.129 Y-15.404 E.01984 G1 X50.406 Y-16.057 E.02643 G1 X50.719 Y-16.553 E.02183 G1 X51.079 Y-16.957 E.02017 G1 X51.469 Y-17.279 E.01881 G1 X51.894 Y-17.534 E.01848 G1 X52.495 Y-17.772 E.02407 G1 X53.077 Y-17.898 E.02216 G1 X53.547 Y-17.928 E.01754 G1 X56.557 Y-17.928 E.11212 G1 X57.103 Y-17.886 E.0204 G1 X57.603 Y-17.771 E.01911 G1 X58.256 Y-17.494 E.02643 G1 X58.786 Y-17.155 E.02343 G1 X59.157 Y-16.821 E.01858 G1 X59.468 Y-16.446 E.01814 G1 X59.714 Y-16.046 E.01752 G1 X59.972 Y-15.404 E.02574 G1 X60.098 Y-14.823 E.02214 G1 X60.128 Y-14.353 E.01754 G1 X60.128 Y14.886 E1.08905 G1 X59.671 Y14.886 F30000 G1 F3000 G1 X59.671 Y34.399 E.72679 G1 X59.731 Y34.792 E.01479 G1 X59.847 Y35.117 E.01286 G1 X60.073 Y35.476 E.01581 G1 X60.542 Y36.018 E.02668 G1 X60.744 Y36.345 E.01433 G1 X61.011 Y37.027 E.02727 M73 P6 R103 G1 X61.092 Y37.425 E.01513 G1 X61.121 Y37.867 E.01651 G1 X61.121 Y39.326 E.05434 G1 X61.086 Y39.806 E.01792 G1 X60.979 Y40.274 E.01787 G1 X60.743 Y40.832 E.02257 G1 X60.433 Y41.317 E.02143 G1 X60.147 Y41.632 E.01587 G1 X59.808 Y41.91 E.01631 G1 X59.443 Y42.127 E.01583 G1 X58.889 Y42.342 E.02212 G1 X58.437 Y42.439 E.01723 G1 X57.982 Y42.471 E.017 G1 X52.124 Y42.471 E.21818 G1 X51.644 Y42.436 E.01792 G1 X51.176 Y42.329 E.01787 G1 X50.616 Y42.092 E.02266 G1 X50.183 Y41.82 E.01905 G1 X49.816 Y41.494 E.01826 G1 X49.54 Y41.158 E.0162 G1 X49.326 Y40.796 E.01567 G1 X49.09 Y40.176 E.02474 G1 X49.008 Y39.775 E.01523 G1 X48.979 Y39.341 E.01618 G1 X48.98 Y37.844 E.05577 G1 X49.014 Y37.391 E.01694 G1 X49.097 Y37.003 E.01477 G1 X49.429 Y36.236 E.03112 G1 X49.646 Y35.909 E.01461 G1 X50.05 Y35.446 E.02289 G1 X50.245 Y35.126 E.01396 G1 X50.385 Y34.726 E.01576 G1 X50.429 Y34.39 E.01264 G1 X50.429 Y-14.326 E1.81449 G1 X50.464 Y-14.806 E.01792 G1 X50.571 Y-15.274 E.01787 G1 X50.808 Y-15.834 E.02266 G1 X51.08 Y-16.267 E.01905 G1 X51.406 Y-16.634 E.01826 G1 X51.742 Y-16.91 E.0162 G1 X52.108 Y-17.127 E.01584 G1 X52.618 Y-17.329 E.02044 G1 X53.15 Y-17.444 E.02029 G1 X53.566 Y-17.471 E.01551 G1 X56.534 Y-17.471 E.11057 G1 X57.024 Y-17.434 E.01827 G1 X57.472 Y-17.33 E.01716 G1 X58.032 Y-17.093 E.02263 G1 X58.517 Y-16.783 E.02143 G1 X58.833 Y-16.496 E.0159 G1 X59.089 Y-16.187 E.01495 G1 X59.298 Y-15.849 E.0148 G1 X59.529 Y-15.281 E.02285 G1 X59.644 Y-14.75 E.02024 G1 X59.671 Y-14.334 E.01551 G1 X59.671 Y14.846 E1.08684 G1 X59.214 Y14.846 F30000 G1 F3000 G1 X59.214 Y34.388 E.72788 G1 X59.304 Y34.955 E.02138 G1 X59.467 Y35.371 E.01663 G1 X59.734 Y35.782 E.01824 G1 X60.165 Y36.281 E.02458 G1 X60.327 Y36.539 E.01136 G1 X60.573 Y37.168 E.02514 G1 X60.638 Y37.495 E.01242 G1 X60.664 Y37.887 E.01463 G1 X60.664 Y39.305 E.0528 G1 X60.634 Y39.728 E.01579 G1 X60.538 Y40.144 E.0159 G1 X60.342 Y40.607 E.01876 G1 X60.061 Y41.047 E.01942 G1 X59.823 Y41.307 E.01312 G1 X59.536 Y41.54 E.01376 G1 X59.231 Y41.718 E.01317 G1 X58.747 Y41.905 E.01934 G1 X58.363 Y41.986 E.01461 G1 X57.961 Y42.014 E.01501 G1 X52.145 Y42.014 E.21662 G1 X51.722 Y41.984 E.01579 G1 X51.306 Y41.888 E.0159 G1 X50.838 Y41.69 E.01895 G1 X50.467 Y41.459 E.01625 G1 X50.14 Y41.168 E.01632 G1 X49.911 Y40.886 E.01353 G1 X49.735 Y40.586 E.01296 G1 X49.528 Y40.037 E.02186 G1 X49.462 Y39.705 E.01262 G1 X49.436 Y39.322 E.0143 G1 X49.438 Y37.856 E.05458 G1 X49.466 Y37.466 E.01459 G1 X49.532 Y37.157 E.01176 G1 X49.84 Y36.445 E.02888 G1 X50.016 Y36.18 E.01185 G1 X50.388 Y35.755 E.02103 G1 X50.63 Y35.374 E.01682 G1 X50.812 Y34.887 E.01935 G1 X50.886 Y34.38 E.0191 G1 X50.886 Y-14.305 E1.81332 G1 X50.916 Y-14.728 E.01579 G1 X51.012 Y-15.144 E.0159 G1 X51.21 Y-15.612 E.01895 G1 X51.441 Y-15.983 E.01625 G1 X51.732 Y-16.31 E.01632 G1 X52.014 Y-16.54 E.01355 G1 X52.32 Y-16.719 E.01322 G1 X52.762 Y-16.892 E.0177 G1 X53.224 Y-16.991 E.01758 G1 X53.585 Y-17.014 E.01347 G1 X56.512 Y-17.014 E.10903 G1 X56.944 Y-16.982 E.01613 G1 X57.341 Y-16.889 E.0152 G1 X57.828 Y-16.681 E.01971 G1 X58.247 Y-16.411 E.01856 G1 X58.508 Y-16.172 E.01319 G1 X58.711 Y-15.927 E.01184 G1 X58.883 Y-15.651 E.0121 G1 X59.086 Y-15.156 E.01994 G1 X59.191 Y-14.676 E.01831 G1 X59.214 Y-14.315 E.01347 G1 X59.214 Y14.806 E1.08464 G1 X58.754 Y14.806 F30000 G1 F3000 G1 X58.757 Y35.704 E.77839 G1 X58.84 Y35.83 E.00562 G1 X59.113 Y35.948 E.01108 G1 X59.365 Y36.114 E.01124 G1 X59.528 Y36.258 E.00812 G1 X59.792 Y36.569 E.01519 G1 X60.054 Y37.058 E.02063 G1 X60.166 Y37.451 E.01525 G1 X60.203 Y37.767 E.01183 G1 X60.207 Y39.359 E.05932 G1 X60.151 Y39.808 E.01685 G1 X60.048 Y40.155 E.01347 G1 X59.81 Y40.607 E.01905 G1 X59.587 Y40.882 E.01317 G1 X59.28 Y41.142 E.01499 G1 X58.813 Y41.398 E.01982 G1 X58.615 Y41.462 E.00777 G1 X58.096 Y41.55 E.01958 G1 X52.084 Y41.557 E.22393 G1 X51.6 Y41.493 E.0182 G1 X51.327 Y41.411 E.01063 G1 X51.032 Y41.277 E.01206 G1 X50.561 Y40.922 E.02197 G1 X50.417 Y40.776 E.00765 G1 X50.2 Y40.467 E.01403 G1 X50.041 Y40.14 E.01355 G1 X49.989 Y39.971 E.00657 G1 X49.9 Y39.447 E.0198 G1 X49.9 Y37.758 E.06292 G1 X50.015 Y37.152 E.02296 G1 X50.175 Y36.784 E.01495 G1 X50.492 Y36.344 E.0202 G1 X50.796 Y36.07 E.01524 G1 X51.011 Y35.931 E.00955 G1 X51.265 Y35.809 E.0105 G1 X51.343 Y35.685 E.00544 G1 X51.343 Y-14.359 E1.86397 G1 X51.399 Y-14.808 E.01686 G1 X51.503 Y-15.167 E.01391 G1 X51.698 Y-15.538 E.01561 G1 X51.98 Y-15.892 E.01685 G1 X52.342 Y-16.192 E.01749 G1 X52.685 Y-16.377 E.01453 G1 X53.053 Y-16.496 E.0144 G1 X53.536 Y-16.557 E.01815 G1 X56.564 Y-16.557 E.11278 G1 X56.984 Y-16.506 E.01576 G1 X57.335 Y-16.408 E.01357 G1 X57.832 Y-16.137 E.02107 G1 X58.096 Y-15.918 E.01278 G1 X58.28 Y-15.718 E.01013 G1 X58.449 Y-15.468 E.01124 G1 X58.609 Y-15.14 E.01359 G1 X58.661 Y-14.971 E.00659 G1 X58.75 Y-14.445 E.01986 G1 X58.754 Y14.766 E1.08801 G1 X58.297 Y14.766 F30000 M73 P6 R102 G1 F3000 G1 X58.3 Y36.018 E.79157 G1 X58.388 Y36.146 E.00578 G1 X58.859 Y36.327 E.0188 G1 X59.065 Y36.459 E.0091 G1 X59.186 Y36.562 E.00594 G1 X59.389 Y36.785 E.01121 G1 X59.614 Y37.182 E.01703 G1 X59.711 Y37.493 E.01212 G1 X59.75 Y37.827 E.01254 G1 X59.75 Y39.368 E.05737 G1 X59.697 Y39.756 E.01459 G1 X59.645 Y39.94 E.00712 G1 X59.454 Y40.32 E.01586 G1 X59.286 Y40.539 E.01026 G1 X59.065 Y40.739 E.01109 G1 X58.665 Y40.966 E.01715 G1 X58.538 Y41.012 E.00503 G1 X58.107 Y41.093 E.01632 G1 X52.075 Y41.1 E.22469 G1 X51.742 Y41.058 E.01249 G1 X51.449 Y40.971 E.01139 G1 X51.218 Y40.86 E.00953 G1 X50.839 Y40.56 E.01803 G1 X50.747 Y40.46 E.00503 G1 X50.612 Y40.269 E.00872 G1 X50.476 Y39.999 E.01127 G1 X50.439 Y39.892 E.0042 G1 X50.357 Y39.459 E.01643 G1 X50.357 Y37.745 E.06383 G1 X50.435 Y37.331 E.01571 G1 X50.546 Y37.051 E.01119 G1 X50.796 Y36.685 E.01651 G1 X51.043 Y36.454 E.01262 G1 X51.204 Y36.345 E.00723 G1 X51.448 Y36.227 E.0101 G1 X51.704 Y36.147 E.00997 G1 X51.8 Y36.016 E.00605 G1 X51.8 Y-14.368 E1.87661 G1 X51.853 Y-14.756 E.01458 G1 X51.943 Y-15.042 E.01116 G1 X52.1 Y-15.322 E.01199 G1 X52.339 Y-15.609 E.01391 G1 X52.631 Y-15.838 E.01381 G1 X52.898 Y-15.973 E.01117 G1 X53.192 Y-16.061 E.01142 G1 X53.527 Y-16.1 E.01257 G1 X56.572 Y-16.1 E.11341 G1 X56.933 Y-16.052 E.01357 G1 X57.214 Y-15.967 E.01092 G1 X57.529 Y-15.795 E.01337 G1 X57.81 Y-15.561 E.01362 G1 X57.903 Y-15.46 E.00509 G1 X58.038 Y-15.269 E.00872 G1 X58.174 Y-14.999 E.01126 G1 X58.211 Y-14.892 E.0042 G1 X58.293 Y-14.457 E.01651 G1 X58.297 Y14.726 E1.08695 G1 X57.84 Y14.726 F30000 G1 F3000 G1 X57.843 Y36.42 E.80803 G1 X57.89 Y36.524 E.00426 G1 X57.969 Y36.557 E.00317 G1 X58.225 Y36.577 E.00957 G1 X58.348 Y36.609 E.00474 G1 X58.616 Y36.715 E.01072 G1 X58.763 Y36.802 E.00635 G1 X58.898 Y36.917 E.00662 G1 X59.053 Y37.094 E.00875 G1 X59.214 Y37.403 E.01299 G1 X59.256 Y37.542 E.0054 G1 X59.293 Y37.819 E.01044 G1 X59.293 Y39.377 E.05802 G1 X59.244 Y39.694 E.01192 G1 X59.207 Y39.812 E.00461 G1 X59.046 Y40.115 E.01281 G1 X58.933 Y40.248 E.00649 G1 X58.756 Y40.403 E.00875 G1 X58.447 Y40.564 E.01299 G1 X58.12 Y40.636 E.01249 G1 X52.066 Y40.643 E.22548 G1 X51.884 Y40.624 E.00679 G1 X51.57 Y40.53 E.01222 G1 X51.424 Y40.452 E.00617 G1 X51.126 Y40.204 E.01445 G1 X50.979 Y39.997 E.00943 G1 X50.887 Y39.8 E.00811 G1 X50.814 Y39.469 E.01261 G1 X50.807 Y37.823 E.06133 G1 X50.855 Y37.511 E.01173 G1 X50.974 Y37.212 E.01202 G1 X51.17 Y36.949 E.0122 G1 X51.348 Y36.794 E.00878 G1 X51.449 Y36.731 E.00445 G1 X51.65 Y36.637 E.00826 G1 X51.79 Y36.594 E.00546 G1 X52.135 Y36.556 E.01292 G1 X52.233 Y36.498 E.00426 G1 X52.257 Y36.42 E.00303 G1 X52.257 Y-14.377 E1.892 G1 X52.306 Y-14.695 E.01198 G1 X52.378 Y-14.903 E.00819 G1 X52.444 Y-15.021 E.00504 G1 X52.696 Y-15.325 E.0147 G1 X52.903 Y-15.471 E.00943 G1 X53.1 Y-15.563 E.00811 G1 X53.242 Y-15.606 E.00551 G1 X53.519 Y-15.643 E.01044 G1 X56.581 Y-15.643 E.11404 G1 X56.875 Y-15.599 E.01106 G1 X57.078 Y-15.531 E.00797 G1 X57.226 Y-15.452 E.00626 G1 X57.524 Y-15.204 E.01445 G1 X57.671 Y-14.997 E.00943 G1 X57.763 Y-14.8 E.0081 G1 X57.836 Y-14.47 E.0126 G1 X57.84 Y14.686 E1.08593 G1 X57.386 Y14.686 F30000 G1 F3000 G1 X57.386 Y36.877 E.82654 G1 X57.433 Y36.981 E.00426 G1 X57.523 Y37.014 E.00355 G1 X58.041 Y37.014 E.01932 G1 X58.173 Y37.031 E.00493 G1 X58.459 Y37.144 E.01146 G1 X58.611 Y37.273 E.00743 G1 X58.702 Y37.386 E.00541 G1 X58.804 Y37.603 E.00892 G1 X58.836 Y37.811 E.00782 G1 X58.836 Y39.388 E.05874 G1 X58.793 Y39.618 E.00872 G1 X58.706 Y39.809 E.00783 G1 X58.577 Y39.961 E.00743 G1 X58.464 Y40.052 E.00541 G1 X58.247 Y40.154 E.00892 G1 X58.039 Y40.186 E.00782 G1 X52.059 Y40.186 E.22276 G1 X51.932 Y40.17 E.00475 G1 X51.707 Y40.094 E.00884 G1 X51.489 Y39.927 E.01023 G1 X51.398 Y39.814 E.00541 G1 X51.296 Y39.597 E.00892 G1 X51.264 Y39.389 E.00781 G1 X51.264 Y37.812 E.05874 G1 X51.307 Y37.582 E.00871 G1 X51.394 Y37.391 E.00783 G1 X51.523 Y37.239 E.00743 G1 X51.636 Y37.148 E.00541 G1 X51.853 Y37.046 E.00892 G1 X52.061 Y37.014 E.00781 G1 X52.577 Y37.014 E.01925 G1 X52.681 Y36.967 E.00426 G1 X52.714 Y36.877 E.00355 G1 X52.714 Y-14.388 E1.90942 G1 X52.757 Y-14.621 E.00884 G1 X52.804 Y-14.74 E.00475 G1 X52.973 Y-14.961 E.01037 G1 X53.086 Y-15.052 E.00541 G1 X53.303 Y-15.154 E.00892 G1 X53.511 Y-15.186 E.00781 G1 X56.591 Y-15.186 E.11475 G1 X56.718 Y-15.17 E.00475 G1 X56.943 Y-15.094 E.00884 G1 X57.161 Y-14.927 E.01023 G1 X57.252 Y-14.814 E.00541 G1 X57.354 Y-14.597 E.00892 G1 X57.386 Y-14.389 E.00782 G1 X57.386 Y14.646 E1.08146 G1 X56.929 Y14.646 F30000 G1 F3000 G1 X56.929 Y37.471 E.85016 G1 X58.05 Y37.471 E.04177 G1 X58.161 Y37.5 E.00426 G1 X58.245 Y37.547 E.00361 G1 X58.354 Y37.684 E.00652 G1 X58.379 Y37.8 E.00442 G1 X58.379 Y39.4 E.05959 G1 X58.35 Y39.511 E.00426 G1 X58.303 Y39.595 E.00361 G1 X58.166 Y39.704 E.00652 G1 X58.05 Y39.729 E.00442 G1 X52.05 Y39.729 E.22348 G1 X51.939 Y39.7 E.00426 G1 X51.855 Y39.653 E.00361 G1 X51.746 Y39.516 E.00652 G1 X51.721 Y39.4 E.00442 G1 X51.721 Y37.8 E.05959 G1 X51.75 Y37.689 E.00426 G1 X51.797 Y37.605 E.00361 G1 X51.934 Y37.496 E.00652 G1 X52.05 Y37.471 E.00442 G1 X53.171 Y37.471 E.04177 G1 X53.171 Y-14.4 E1.93201 G1 X53.2 Y-14.511 E.00426 G1 X53.247 Y-14.595 E.00361 G1 X53.384 Y-14.704 E.00652 G1 X53.5 Y-14.729 E.00442 G1 X56.6 Y-14.729 E.11546 G1 X56.711 Y-14.7 E.00426 G1 X56.795 Y-14.653 E.00361 G1 X56.904 Y-14.516 E.00652 G1 X56.929 Y-14.4 E.00442 G1 X56.929 Y14.606 E1.08036 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X56.929 Y16.606 ;WIPE_END G1 X56.671 Y24.234 Z.6 F30000 G1 X56.2 Y38.2 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X57.65 Y38.2 E.05401 G1 X57.65 Y39 E.0298 G1 X52.45 Y39 E.19368 G1 X52.45 Y38.2 E.0298 G1 X53.9 Y38.2 E.05401 G1 X53.9 Y-14 E1.94425 G1 X56.2 Y-14 E.08567 G1 X56.2 Y38.16 E1.94276 G1 X55.7 Y38.2 F30000 ;TYPE:Inner wall G1 F3000 G1 X55.7 Y38.5 E.01117 G1 X54.4 Y38.5 E.04842 G1 X54.4 Y-13.5 E1.9368 G1 X55.7 Y-13.5 E.04842 G1 X55.7 Y38.16 E1.92414 G1 X55.23 Y38.043 F30000 G1 F3000 G1 X54.857 Y38.043 E.01389 G1 X54.857 Y-13.043 E1.90275 G1 X55.243 Y-13.043 E.01437 G1 X55.243 Y38.016 E1.90174 G1 X55.95 Y38.6 F30000 ;TYPE:Gap infill ;WIDTH:0.342926 G1 F3000 G1 X57.4 Y38.6 E.03545 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X55.95 Y38.6 ;WIPE_END G1 X54.15 Y38.6 Z.6 F30000 G1 Z.2 G1 E.8 F1800 G1 F3000 G1 X52.7 Y38.6 E.03545 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X54.15 Y38.6 ;WIPE_END G1 X46.518 Y38.6 Z.6 F30000 G1 X41.492 Y38.6 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Brim ;WIDTH:0.5 G1 F3000 G1 X41.492 Y41.692 E.11515 G1 X41.444 Y42.34 E.02422 G1 X41.304 Y42.961 E.02373 G1 X40.901 Y43.889 E.03766 G1 X40.551 Y44.424 E.02381 G1 X40.124 Y44.903 E.0239 G1 X39.631 Y45.314 E.0239 G1 X39.086 Y45.647 E.02378 G1 X38.248 Y45.973 E.0335 G1 X37.621 Y46.104 E.02386 G1 X37.042 Y46.142 E.02159 G1 X2.058 Y46.142 E1.30302 G1 X1.41 Y46.094 E.02422 G1 X.789 Y45.954 E.02373 G1 X-.139 Y45.551 E.03766 G1 X-.674 Y45.201 E.02381 G1 X-1.153 Y44.774 E.0239 G1 X-1.564 Y44.281 E.0239 G1 X-1.897 Y43.736 E.02378 G1 X-2.223 Y42.898 E.0335 G1 X-2.354 Y42.271 E.02386 G1 X-2.392 Y41.692 E.02159 G1 X-2.392 Y-11.492 E1.9809 G1 X-2.344 Y-12.14 E.02422 G1 X-2.204 Y-12.761 E.02373 G1 X-1.801 Y-13.689 E.03766 G1 X-1.451 Y-14.224 E.02381 G1 X-1.024 Y-14.703 E.0239 G1 X-.531 Y-15.114 E.0239 G1 X.014 Y-15.447 E.02378 G1 X.852 Y-15.773 E.0335 G1 X1.479 Y-15.904 E.02386 G1 X2.058 Y-15.942 E.02159 G1 X37.042 Y-15.942 E1.30302 G1 X37.69 Y-15.894 E.02422 G1 X38.313 Y-15.754 E.02377 G1 X39.156 Y-15.397 E.03411 G1 X39.774 Y-15 E.02737 G1 X40.253 Y-14.574 E.02386 G1 X40.664 Y-14.081 E.0239 G1 X40.997 Y-13.536 E.02378 G1 X41.323 Y-12.698 E.0335 G1 X41.454 Y-12.071 E.02386 G1 X41.492 Y-11.492 E.02159 G1 X41.492 Y38.56 E1.86426 G1 X41.035 Y38.56 F30000 G1 F3000 G1 X41.035 Y41.67 E.11582 G1 X40.992 Y42.262 E.02214 G1 X40.87 Y42.806 E.02075 G1 X40.491 Y43.681 E.03551 G1 X40.18 Y44.153 E.02105 G1 X39.812 Y44.566 E.02062 G1 X39.372 Y44.935 E.02138 G1 X38.893 Y45.229 E.02093 G1 X38.106 Y45.536 E.03145 G1 X37.568 Y45.648 E.02048 G1 X37.032 Y45.685 E.02002 G1 X2.08 Y45.685 E1.30181 G1 X1.488 Y45.642 E.02214 G1 X.944 Y45.52 E.02075 G1 X.069 Y45.141 E.03551 G1 X-.403 Y44.83 E.02105 G1 X-.816 Y44.462 E.02062 G1 X-1.185 Y44.022 E.02138 G1 X-1.479 Y43.543 E.02093 G1 X-1.786 Y42.756 E.03145 G1 X-1.898 Y42.218 E.02048 G1 X-1.935 Y41.673 E.02036 G1 X-1.935 Y-11.47 E1.97935 G1 X-1.892 Y-12.062 E.02214 G1 X-1.77 Y-12.606 E.02075 G1 X-1.391 Y-13.481 E.03551 G1 X-1.08 Y-13.953 E.02105 G1 X-.712 Y-14.366 E.02062 G1 X-.272 Y-14.735 E.02138 G1 X.207 Y-15.029 E.02093 G1 X.994 Y-15.336 E.03145 G1 X1.532 Y-15.448 E.02048 G1 X2.068 Y-15.485 E.02002 G1 X37.03 Y-15.485 E1.30219 G1 X37.612 Y-15.442 E.02176 G1 X38.16 Y-15.32 E.0209 G1 X38.931 Y-14.995 E.03116 G1 X39.488 Y-14.64 E.02461 G1 X39.916 Y-14.262 E.02128 G1 X40.297 Y-13.806 E.02213 G1 X40.59 Y-13.322 E.02108 G1 X40.886 Y-12.556 E.03055 G1 X40.998 Y-12.018 E.02048 G1 X41.035 Y-11.482 E.02002 G1 X41.035 Y38.52 E1.86238 G1 X40.578 Y38.52 F30000 G1 F3000 G1 X40.578 Y41.648 E.1165 G1 X40.539 Y42.185 E.02008 G1 X40.437 Y42.651 E.01776 G1 X40.081 Y43.472 E.03333 G1 X39.81 Y43.881 E.01827 G1 X39.485 Y44.244 E.01814 G1 X39.112 Y44.557 E.01812 G1 X38.7 Y44.812 E.01806 G1 X37.965 Y45.098 E.02938 G1 X37.496 Y45.195 E.01782 G1 X37.012 Y45.228 E.01809 G1 X2.102 Y45.228 E1.30024 G1 X1.565 Y45.189 E.02008 G1 X1.099 Y45.087 E.01776 G1 X.278 Y44.731 E.03333 G1 X-.131 Y44.46 E.01827 G1 X-.494 Y44.135 E.01814 G1 X-.807 Y43.762 E.01812 G1 X-1.062 Y43.35 E.01806 G1 X-1.348 Y42.615 E.02938 G1 X-1.445 Y42.146 E.01782 G1 X-1.478 Y41.653 E.01842 G1 X-1.478 Y-11.448 E1.97779 G1 X-1.439 Y-11.985 E.02008 G1 X-1.337 Y-12.451 E.01776 G1 X-.981 Y-13.272 E.03333 G1 X-.71 Y-13.681 E.01827 G1 X-.385 Y-14.044 E.01814 G1 X-.012 Y-14.357 E.01812 G1 X.4 Y-14.612 E.01806 G1 X1.135 Y-14.898 E.02938 G1 X1.604 Y-14.995 E.01782 G1 X2.079 Y-15.027 E.01774 G1 X37.008 Y-15.028 E1.30096 G1 X37.535 Y-14.989 E.01971 G1 X38.032 Y-14.878 E.01895 G1 X38.728 Y-14.583 E.02816 G1 X39.203 Y-14.28 E.02099 G1 X39.58 Y-13.949 E.01866 G1 X39.917 Y-13.548 E.01954 G1 X40.182 Y-13.108 E.01912 G1 X40.448 Y-12.415 E.02764 G1 X40.545 Y-11.946 E.01785 G1 X40.577 Y-11.471 E.01774 G1 X40.578 Y38.48 E1.86048 G1 X40.121 Y38.48 F30000 G1 F3000 G1 X40.121 Y41.626 E.11718 G1 X40.086 Y42.11 E.01806 G1 X40.003 Y42.497 E.01476 G1 X39.671 Y43.263 E.03111 G1 X39.44 Y43.608 E.01545 G1 X39.173 Y43.907 E.01495 G1 X38.851 Y44.179 E.01567 G1 X38.505 Y44.394 E.01518 G1 X37.823 Y44.661 E.02728 G1 X37.425 Y44.742 E.01514 G1 X36.991 Y44.771 E.01618 G1 X2.124 Y44.771 E1.29868 G1 X1.64 Y44.736 E.01806 G1 X1.253 Y44.653 E.01476 G1 X.487 Y44.321 E.03111 G1 X.142 Y44.09 E.01545 G1 X-.157 Y43.823 E.01495 G1 X-.429 Y43.501 E.01567 G1 X-.644 Y43.155 E.01518 G1 X-.911 Y42.473 E.02728 G1 X-.992 Y42.075 E.01513 G1 X-1.021 Y41.633 E.01651 G1 X-1.021 Y-11.426 E1.97624 G1 X-.986 Y-11.91 E.01806 G1 X-.903 Y-12.297 E.01476 G1 X-.571 Y-13.063 E.03111 G1 X-.34 Y-13.408 E.01545 G1 X-.073 Y-13.707 E.01495 G1 X.249 Y-13.979 E.01567 G1 X.595 Y-14.194 E.01518 G1 X1.277 Y-14.461 E.02728 G1 X1.675 Y-14.542 E.01514 G1 X2.09 Y-14.57 E.01549 G1 X36.996 Y-14.57 E1.30011 G1 X37.478 Y-14.533 E.01801 G1 X37.903 Y-14.436 E.01624 G1 X38.524 Y-14.171 E.02516 G1 X38.919 Y-13.919 E.01744 G1 X39.244 Y-13.636 E.01606 G1 X39.537 Y-13.289 E.01691 G1 X39.774 Y-12.895 E.01712 G1 X40.01 Y-12.276 E.0247 G1 X40.092 Y-11.875 E.01523 G1 X40.12 Y-11.46 E.01549 G1 X40.121 Y38.44 E1.85858 G1 X39.664 Y38.44 F30000 G1 F3000 G1 X39.664 Y41.605 E.11788 G1 X39.633 Y42.035 E.01607 G1 X39.568 Y42.343 E.01174 G1 X39.261 Y43.054 E.02884 G1 X39.072 Y43.335 E.0126 G1 X38.846 Y43.585 E.01255 G1 X38.589 Y43.802 E.01252 G1 X38.31 Y43.977 E.01227 G1 X37.682 Y44.223 E.02513 G1 X37.355 Y44.288 E.01244 G1 X36.971 Y44.314 E.01431 G1 X2.145 Y44.314 E1.29714 G1 X1.715 Y44.283 E.01607 G1 X1.407 Y44.218 E.01174 G1 X.696 Y43.911 E.02884 G1 X.415 Y43.722 E.0126 G1 X.165 Y43.496 E.01255 G1 X-.052 Y43.239 E.01252 G1 X-.227 Y42.96 E.01227 G1 X-.473 Y42.332 E.02513 G1 X-.538 Y42.005 E.01243 G1 X-.564 Y41.613 E.01463 G1 X-.564 Y-11.405 E1.97471 G1 X-.533 Y-11.835 E.01607 G1 X-.468 Y-12.143 E.01174 G1 X-.161 Y-12.854 E.02884 G1 X.028 Y-13.135 E.0126 G1 X.254 Y-13.385 E.01255 G1 X.511 Y-13.602 E.01252 G1 X.79 Y-13.777 E.01227 G1 X1.418 Y-14.023 E.02513 G1 X1.746 Y-14.088 E.01245 G1 X2.11 Y-14.113 E.01362 G1 X36.984 Y-14.113 E1.2989 G1 X37.399 Y-14.081 E.01551 G1 X37.772 Y-13.995 E.01427 G1 X38.32 Y-13.759 E.02221 G1 X38.636 Y-13.558 E.01396 G1 X38.91 Y-13.321 E.01348 G1 X39.17 Y-13.013 E.01504 G1 X39.366 Y-12.683 E.01427 G1 X39.572 Y-12.137 E.02174 G1 X39.638 Y-11.804 E.01263 G1 X39.663 Y-11.449 E.01327 G1 X39.664 Y38.4 E1.85668 G1 X39.207 Y38.4 F30000 G1 F3000 G1 X39.207 Y41.658 E.12133 G1 X39.124 Y42.213 E.02093 G1 X38.986 Y42.597 E.01518 G1 X38.926 Y42.715 E.00492 G1 X38.607 Y43.157 E.0203 G1 X38.379 Y43.371 E.01164 G1 X38.226 Y43.483 E.00708 G1 X37.679 Y43.748 E.02263 G1 X37.405 Y43.815 E.01054 G1 X37.015 Y43.857 E.01458 G1 X2.092 Y43.857 E1.30075 G1 X1.537 Y43.774 E.02093 G1 X1.153 Y43.636 E.01518 G1 X1.035 Y43.576 E.00492 G1 X.593 Y43.257 E.0203 G1 X.379 Y43.029 E.01164 G1 X.267 Y42.876 E.00708 G1 X.002 Y42.329 E.02263 G1 X-.065 Y42.055 E.01054 G1 X-.107 Y41.665 E.01458 G1 X-.107 Y-11.459 E1.97869 G1 X-.051 Y-11.908 E.01686 G1 X.053 Y-12.267 E.01391 G1 X.248 Y-12.638 E.01561 G1 X.53 Y-12.992 E.01685 G1 X.892 Y-13.292 E.01749 G1 X1.235 Y-13.477 E.01453 G1 X1.603 Y-13.596 E.0144 G1 X2.086 Y-13.657 E.01815 G1 X37.008 Y-13.657 E1.3007 G1 X37.563 Y-13.574 E.02093 G1 X37.947 Y-13.436 E.01518 G1 X38.065 Y-13.376 E.00492 G1 X38.507 Y-13.057 E.0203 G1 X38.721 Y-12.829 E.01164 G1 X38.833 Y-12.676 E.00708 G1 X39.098 Y-12.129 E.02263 G1 X39.165 Y-11.855 E.01054 G1 X39.207 Y-11.465 E.01458 G1 X39.207 Y38.36 E1.8558 G1 X38.75 Y38.36 F30000 G1 F3000 G1 X38.75 Y41.668 E.1232 G1 X38.698 Y42.046 E.01422 G1 X38.553 Y42.451 E.01601 G1 X38.304 Y42.815 E.01643 G1 X38.06 Y43.043 E.01245 G1 X37.962 Y43.11 E.00443 G1 X37.572 Y43.304 E.01622 G1 X37.36 Y43.361 E.00818 G1 X37.023 Y43.4 E.01264 G1 X2.082 Y43.4 E1.3014 G1 X1.704 Y43.348 E.01422 G1 X1.299 Y43.203 E.01601 G1 X.935 Y42.954 E.01643 G1 X.707 Y42.71 E.01245 G1 X.64 Y42.612 E.00443 G1 X.446 Y42.222 E.01622 G1 X.389 Y42.01 E.00818 G1 X.35 Y41.673 E.01264 G1 X.35 Y-11.468 E1.97928 G1 X.403 Y-11.856 E.01458 G1 X.493 Y-12.142 E.01116 G1 X.65 Y-12.422 E.01199 G1 X.889 Y-12.709 E.01391 G1 X1.181 Y-12.938 E.01381 G1 X1.448 Y-13.073 E.01117 G1 X1.742 Y-13.161 E.01142 G1 X2.077 Y-13.2 E.01257 G1 X37.018 Y-13.2 E1.3014 G1 X37.396 Y-13.148 E.01422 G1 X37.801 Y-13.003 E.01601 G1 X38.165 Y-12.754 E.01643 G1 X38.393 Y-12.51 E.01245 G1 X38.46 Y-12.412 E.00443 G1 X38.654 Y-12.022 E.01622 G1 X38.711 Y-11.81 E.00818 G1 X38.75 Y-11.473 E.01264 G1 X38.75 Y38.32 E1.85459 G1 X38.293 Y38.32 F30000 G1 F3000 G1 X38.293 Y41.677 E.12504 G1 X38.245 Y41.989 E.01174 G1 X38.126 Y42.288 E.01202 G1 X37.93 Y42.551 E.0122 G1 X37.756 Y42.703 E.00859 G1 X37.447 Y42.864 E.01299 G1 X37.308 Y42.906 E.0054 G1 X37.031 Y42.943 E.01044 G1 X2.073 Y42.943 E1.30204 G1 X1.761 Y42.895 E.01174 G1 X1.462 Y42.776 E.01202 G1 X1.199 Y42.58 E.0122 G1 X1.047 Y42.406 E.00859 G1 X.886 Y42.097 E.01299 G1 X.844 Y41.958 E.0054 G1 X.807 Y41.681 E.01044 G1 X.807 Y-11.477 E1.97992 G1 X.856 Y-11.795 E.01198 G1 X.928 Y-12.003 E.00819 G1 X.994 Y-12.121 E.00504 G1 X1.246 Y-12.425 E.0147 G1 X1.453 Y-12.571 E.00943 G1 X1.65 Y-12.663 E.00811 G1 X1.792 Y-12.706 E.00551 G1 X2.069 Y-12.743 E.01044 G1 X37.027 Y-12.743 E1.30204 G1 X37.339 Y-12.695 E.01174 G1 X37.638 Y-12.576 E.01202 G1 X37.901 Y-12.38 E.0122 G1 X38.053 Y-12.206 E.00859 G1 X38.214 Y-11.897 E.01299 G1 X38.256 Y-11.758 E.0054 G1 X38.293 Y-11.481 E.01044 G1 X38.293 Y38.28 E1.85339 G1 X37.836 Y38.28 F30000 G1 F3000 G1 X37.836 Y41.688 E.12692 G1 X37.793 Y41.918 E.00872 G1 X37.706 Y42.109 E.00783 G1 X37.577 Y42.261 E.00743 G1 X37.464 Y42.352 E.00541 G1 X37.247 Y42.454 E.00892 G1 X37.039 Y42.486 E.00782 G1 X2.062 Y42.486 E1.30276 G1 X1.832 Y42.443 E.00872 G1 X1.641 Y42.356 E.00783 G1 X1.489 Y42.227 E.00743 G1 X1.398 Y42.114 E.00541 G1 X1.296 Y41.897 E.00892 G1 X1.264 Y41.689 E.00781 G1 X1.264 Y-11.488 E1.98064 G1 X1.307 Y-11.721 E.00884 M73 P7 R102 G1 X1.354 Y-11.84 E.00475 G1 X1.523 Y-12.061 E.01037 G1 X1.636 Y-12.152 E.00541 G1 X1.853 Y-12.254 E.00892 G1 X2.061 Y-12.286 E.00781 G1 X37.038 Y-12.286 E1.30276 G1 X37.268 Y-12.244 E.00871 G1 X37.459 Y-12.156 E.00783 G1 X37.611 Y-12.027 E.00743 G1 X37.702 Y-11.914 E.00541 G1 X37.804 Y-11.697 E.00892 G1 X37.836 Y-11.489 E.00782 G1 X37.836 Y38.24 E1.85223 G1 X37.379 Y38.24 F30000 G1 F3000 G1 X37.379 Y41.7 E.12887 G1 X37.35 Y41.811 E.00426 M73 P7 R101 G1 X37.303 Y41.895 E.00361 G1 X37.166 Y42.004 E.00652 G1 X37.05 Y42.029 E.00442 G1 X2.05 Y42.029 E1.30362 G1 X1.939 Y42 E.00426 G1 X1.855 Y41.953 E.00361 G1 X1.746 Y41.816 E.00652 G1 X1.721 Y41.7 E.00442 G1 X1.721 Y-11.5 E1.9815 G1 X1.75 Y-11.611 E.00426 G1 X1.797 Y-11.695 E.00361 G1 X1.934 Y-11.804 E.00652 G1 X2.05 Y-11.829 E.00442 G1 X37.05 Y-11.829 E1.30362 G1 X37.161 Y-11.8 E.00426 G1 X37.245 Y-11.753 E.00361 G1 X37.354 Y-11.616 E.00652 G1 X37.379 Y-11.5 E.00442 G1 X37.379 Y38.2 E1.85114 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X37.379 Y40.2 ;WIPE_END G1 X29.75 Y40.44 Z.6 F30000 G1 X2.45 Y41.3 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Outer wall G1 F3000 G1 X2.45 Y-11.1 E1.9517 G1 X36.65 Y-11.1 E1.27382 G1 X36.65 Y41.3 E1.9517 G1 X2.49 Y41.3 E1.27233 G1 X2.95 Y40.8 F30000 ;TYPE:Inner wall G1 F3000 G1 X2.95 Y-10.6 E1.91445 G1 X36.15 Y-10.6 E1.23657 G1 X36.15 Y40.8 E1.91445 G1 X2.99 Y40.8 E1.23508 G1 X3.407 Y40.343 F30000 G1 F3000 G1 X3.407 Y-10.143 E1.88041 G1 X35.693 Y-10.143 E1.20252 G1 X35.693 Y40.343 E1.88041 G1 X3.447 Y40.343 E1.20104 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X3.445 Y38.343 ;WIPE_END G1 X7.725 Y32.023 Z.6 F30000 G1 X35.556 Y-9.079 Z.6 G1 Z.2 G1 E.8 F1800 ;TYPE:Bottom surface ;WIDTH:0.501228 G1 F4800 G1 X34.835 Y-9.8 E.03807 G1 X34.187 Y-9.8 E.02421 G1 X35.35 Y-8.637 E.06144 G1 X35.35 Y-7.989 E.02421 G1 X33.539 Y-9.8 E.09568 G1 X32.89 Y-9.8 E.02421 G1 X35.35 Y-7.34 E.12991 G1 X35.35 Y-6.692 E.02421 G1 X32.242 Y-9.8 E.16414 G1 X31.594 Y-9.8 E.02421 G1 X35.35 Y-6.044 E.19837 G1 X35.35 Y-5.396 E.02421 G1 X30.946 Y-9.8 E.2326 G1 X30.298 Y-9.8 E.02421 G1 X35.35 Y-4.748 E.26684 G1 X35.35 Y-4.1 E.02421 G1 X29.65 Y-9.8 E.30107 G1 X29.002 Y-9.8 E.02421 G1 X35.35 Y-3.452 E.3353 G1 X35.35 Y-2.803 E.02421 G1 X28.353 Y-9.8 E.36953 G1 X27.705 Y-9.8 E.02421 G1 X35.35 Y-2.155 E.40377 G1 X35.35 Y-1.507 E.02421 G1 X27.057 Y-9.8 E.438 G1 X26.409 Y-9.8 E.02421 G1 X35.35 Y-.859 E.47223 G1 X35.35 Y-.211 E.02421 G1 X25.761 Y-9.8 E.50646 G1 X25.113 Y-9.8 E.02421 G1 X35.35 Y.437 E.54069 G1 X35.35 Y1.085 E.02421 G1 X24.465 Y-9.8 E.57493 G1 X23.816 Y-9.8 E.02421 G1 X35.35 Y1.734 E.60916 G1 X35.35 Y2.382 E.02421 G1 X23.168 Y-9.8 E.64339 G1 X22.52 Y-9.8 E.02421 G1 X35.35 Y3.03 E.67762 G1 X35.35 Y3.678 E.02421 G1 X21.872 Y-9.8 E.71186 G1 X21.224 Y-9.8 E.02421 G1 X35.35 Y4.326 E.74609 G1 X35.35 Y4.974 E.02421 G1 X20.576 Y-9.8 E.78032 G1 X19.928 Y-9.8 E.02421 G1 X35.35 Y5.622 E.81455 G1 X35.35 Y6.271 E.02421 G1 X19.279 Y-9.8 E.84878 G1 X18.631 Y-9.8 E.02421 G1 X35.35 Y6.919 E.88302 G1 X35.35 Y7.567 E.02421 G1 X17.983 Y-9.8 E.91725 G1 X17.335 Y-9.8 E.02421 G1 X35.35 Y8.215 E.95148 G1 X35.35 Y8.863 E.02421 G1 X16.687 Y-9.8 E.98571 G1 X16.039 Y-9.8 E.02421 G1 X35.35 Y9.511 E1.01995 G1 X35.35 Y10.159 E.02421 G1 X15.391 Y-9.8 E1.05418 G1 X14.742 Y-9.8 E.02421 G1 X35.35 Y10.808 E1.08841 G1 X35.35 Y11.456 E.02421 G1 X14.094 Y-9.8 E1.12264 G1 X13.446 Y-9.8 E.02421 G1 X35.35 Y12.104 E1.15687 G1 X35.35 Y12.752 E.02421 G1 X12.798 Y-9.8 E1.19111 G1 X12.15 Y-9.8 E.02421 G1 X35.35 Y13.4 E1.22534 G1 X35.35 Y14.048 E.02421 G1 X11.502 Y-9.8 E1.25957 G1 X10.854 Y-9.8 E.02421 G1 X35.35 Y14.696 E1.2938 G1 X35.35 Y15.345 E.02421 G1 X10.205 Y-9.8 E1.32804 G1 X9.557 Y-9.8 E.02421 G1 X35.35 Y15.993 E1.36227 G1 X35.35 Y16.641 E.02421 G1 X8.909 Y-9.8 E1.3965 G1 X8.261 Y-9.8 E.02421 G1 X35.35 Y17.289 E1.43073 G1 X35.35 Y17.937 E.02421 G1 X7.613 Y-9.8 E1.46496 G1 X6.965 Y-9.8 E.02421 G1 X35.35 Y18.585 E1.4992 G1 X35.35 Y19.233 E.02421 G1 X6.317 Y-9.8 E1.53343 G1 X5.668 Y-9.8 E.02421 G1 X35.35 Y19.882 E1.56766 G1 X35.35 Y20.53 E.02421 G1 X5.02 Y-9.8 E1.60189 G1 X4.372 Y-9.8 E.02421 G1 X35.35 Y21.178 E1.63613 G1 X35.35 Y21.826 E.02421 G1 X3.75 Y-9.774 E1.66899 G1 X3.75 Y-9.126 E.02421 G1 X35.35 Y22.474 E1.66899 G1 X35.35 Y23.122 E.02421 G1 X3.75 Y-8.478 E1.66899 G1 X3.75 Y-7.83 E.02421 G1 X35.35 Y23.771 E1.66899 G1 X35.35 Y24.419 E.02421 G1 X3.75 Y-7.182 E1.66899 G1 X3.75 Y-6.533 E.02421 G1 X35.35 Y25.067 E1.66899 G1 X35.35 Y25.715 E.02421 G1 X3.75 Y-5.885 E1.66899 G1 X3.75 Y-5.237 E.02421 G1 X35.35 Y26.363 E1.66899 G1 X35.35 Y27.011 E.02421 G1 X3.75 Y-4.589 E1.66899 G1 X3.75 Y-3.941 E.02421 G1 X35.35 Y27.659 E1.66899 G1 X35.35 Y28.308 E.02421 G1 X3.75 Y-3.293 E1.66899 G1 X3.75 Y-2.645 E.02421 G1 X35.35 Y28.956 E1.66899 G1 X35.35 Y29.604 E.02421 G1 X3.75 Y-1.996 E1.66899 G1 X3.75 Y-1.348 E.02421 G1 X35.35 Y30.252 E1.66899 G1 X35.35 Y30.9 E.02421 G1 X3.75 Y-.7 E1.66899 G1 X3.75 Y-.052 E.02421 G1 X35.35 Y31.548 E1.66899 G1 X35.35 Y32.196 E.02421 G1 X3.75 Y.596 E1.66899 G1 X3.75 Y1.244 E.02421 G1 X35.35 Y32.845 E1.66899 G1 X35.35 Y33.493 E.02421 G1 X3.75 Y1.892 E1.66899 G1 X3.75 Y2.541 E.02421 G1 X35.35 Y34.141 E1.66899 G1 X35.35 Y34.789 E.02421 G1 X3.75 Y3.189 E1.66899 G1 X3.75 Y3.837 E.02421 G1 X35.35 Y35.437 E1.66899 G1 X35.35 Y36.085 E.02421 G1 X3.75 Y4.485 E1.66899 G1 X3.75 Y5.133 E.02421 G1 X35.35 Y36.733 E1.66899 G1 X35.35 Y37.382 E.02421 G1 X3.75 Y5.781 E1.66899 G1 X3.75 Y6.429 E.02421 G1 X35.35 Y38.03 E1.66899 G1 X35.35 Y38.678 E.02421 G1 X3.75 Y7.078 E1.66899 G1 X3.75 Y7.726 E.02421 G1 X35.35 Y39.326 E1.66899 G1 X35.35 Y39.974 E.02421 G1 X3.75 Y8.374 E1.66899 G1 X3.75 Y9.022 E.02421 G1 X34.728 Y40 E1.63613 G1 X34.08 Y40 E.02421 G1 X3.75 Y9.67 E1.60189 M73 P7 R100 G1 X3.75 Y10.318 E.02421 G1 X33.432 Y40 E1.56766 G1 X32.784 Y40 E.02421 G1 X3.75 Y10.967 E1.53343 G1 X3.75 Y11.615 E.02421 G1 X32.135 Y40 E1.4992 G1 X31.487 Y40 E.02421 G1 X3.75 Y12.263 E1.46496 G1 X3.75 Y12.911 E.02421 M73 P8 R100 G1 X30.839 Y40 E1.43073 G1 X30.191 Y40 E.02421 G1 X3.75 Y13.559 E1.3965 G1 X3.75 Y14.207 E.02421 G1 X29.543 Y40 E1.36227 G1 X28.895 Y40 E.02421 G1 X3.75 Y14.855 E1.32804 G1 X3.75 Y15.504 E.02421 G1 X28.246 Y40 E1.2938 G1 X27.598 Y40 E.02421 G1 X3.75 Y16.152 E1.25957 G1 X3.75 Y16.8 E.02421 G1 X26.95 Y40 E1.22534 G1 X26.302 Y40 E.02421 G1 X3.75 Y17.448 E1.19111 G1 X3.75 Y18.096 E.02421 G1 X25.654 Y40 E1.15687 G1 X25.006 Y40 E.02421 G1 X3.75 Y18.744 E1.12264 G1 X3.75 Y19.392 E.02421 G1 X24.358 Y40 E1.08841 G1 X23.709 Y40 E.02421 G1 X3.75 Y20.041 E1.05418 G1 X3.75 Y20.689 E.02421 G1 X23.061 Y40 E1.01995 G1 X22.413 Y40 E.02421 G1 X3.75 Y21.337 E.98571 G1 X3.75 Y21.985 E.02421 G1 X21.765 Y40 E.95148 G1 X21.117 Y40 E.02421 G1 X3.75 Y22.633 E.91725 G1 X3.75 Y23.281 E.02421 G1 X20.469 Y40 E.88302 G1 X19.821 Y40 E.02421 G1 X3.75 Y23.929 E.84878 G1 X3.75 Y24.578 E.02421 G1 X19.172 Y40 E.81455 G1 X18.524 Y40 E.02421 G1 X3.75 Y25.226 E.78032 G1 X3.75 Y25.874 E.02421 G1 X17.876 Y40 E.74609 G1 X17.228 Y40 E.02421 G1 X3.75 Y26.522 E.71186 G1 X3.75 Y27.17 E.02421 G1 X16.58 Y40 E.67762 G1 X15.932 Y40 E.02421 G1 X3.75 Y27.818 E.64339 G1 X3.75 Y28.466 E.02421 G1 X15.284 Y40 E.60916 G1 X14.635 Y40 E.02421 G1 X3.75 Y29.115 E.57493 G1 X3.75 Y29.763 E.02421 G1 X13.987 Y40 E.54069 G1 X13.339 Y40 E.02421 G1 X3.75 Y30.411 E.50646 G1 X3.75 Y31.059 E.02421 G1 X12.691 Y40 E.47223 G1 X12.043 Y40 E.02421 G1 X3.75 Y31.707 E.438 G1 X3.75 Y32.355 E.02421 G1 X11.395 Y40 E.40377 G1 X10.747 Y40 E.02421 G1 X3.75 Y33.003 E.36953 G1 X3.75 Y33.652 E.02421 G1 X10.098 Y40 E.3353 G1 X9.45 Y40 E.02421 G1 X3.75 Y34.3 E.30107 G1 X3.75 Y34.948 E.02421 G1 X8.802 Y40 E.26684 G1 X8.154 Y40 E.02421 G1 X3.75 Y35.596 E.2326 G1 X3.75 Y36.244 E.02421 G1 X7.506 Y40 E.19837 G1 X6.858 Y40 E.02421 G1 X3.75 Y36.892 E.16414 G1 X3.75 Y37.54 E.02421 G1 X6.21 Y40 E.12991 G1 X5.561 Y40 E.02421 G1 X3.75 Y38.189 E.09568 G1 X3.75 Y38.837 E.02421 G1 X4.913 Y40 E.06144 G1 X4.265 Y40 E.02421 G1 X3.544 Y39.279 E.03807 M106 S255 M106 P2 S255 ;LAYER_CHANGE ;Z:0.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.4 G1 E-.8 F1800 ;WIPE_START G1 F4800 G1 X4.265 Y40 G1 X4.913 Y40 G1 X4.678 Y39.765 ;WIPE_END ;AFTER_LAYER_CHANGE ;0.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 M140 S60 ; set bed temperature G17 G3 Z.8 I.281 J-1.184 P1 F30000 G1 X-31.398 Y31.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-41.715 Y29.63 Z.8 F30000 G1 X-88.66 Y19.948 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-87.203 Y13.189 Z.8 F30000 G1 X-88.66 Y-7.252 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y-7.252 E.1248 G1 X-84.898 Y-1.748 E.18258 G1 X-89.502 Y-1.748 E.15273 G1 X-89.502 Y-7.252 E.18258 G1 X-88.7 Y-7.252 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y-6.845 E.11129 G1 X-85.305 Y-2.155 E.15558 G1 X-89.095 Y-2.155 E.12572 G1 X-89.095 Y-6.845 E.15558 G1 X-88.7 Y-6.845 E.0131 G1 X-88.66 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-79.028 Y-6.49 Z.8 F30000 G1 X-16.24 Y-7.252 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.398 Y-7.252 E.02793 G1 X-15.398 Y-1.748 E.18258 G1 X-20.002 Y-1.748 E.15273 G1 X-20.002 Y-7.252 E.18258 G1 X-16.28 Y-7.252 E.12347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.24 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.805 Y-6.845 E.01443 G1 X-15.805 Y-2.155 E.15558 G1 X-19.595 Y-2.155 E.12572 G1 X-19.595 Y-6.845 E.15558 G1 X-16.28 Y-6.845 E.10996 G1 X-16.24 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-17.216 Y3.162 Z.8 F30000 G1 X-20.002 Y25.21 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-18.771 Y15.586 Z.8 F30000 G1 X-17.443 Y-11.948 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-14.002 Y-8.507 I1.494 J1.947 E.27712 G1 X-14.002 Y49.948 E1.93905 G1 X-15.685 Y49.948 E.05584 G2 X-20.215 Y49.948 I-2.265 J-.945 E.32011 G1 X-84.685 Y49.948 E2.13862 G2 X-89.215 Y49.948 I-2.265 J-.945 E.32011 G1 X-90.898 Y49.948 E.05584 G1 X-90.898 Y-8.507 E1.93905 G2 X-87.457 Y-11.948 I1.948 J-1.494 E.27713 G1 X-84.398 Y-11.948 E.10147 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-17.483 Y-11.948 E.10014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.685 Y-11.735 G1 X-17.897 Y-11.494 G1 X-18.076 Y-11.227 G1 X-18.218 Y-10.939 G1 X-18.321 Y-10.635 G1 X-18.383 Y-10.32 G1 X-18.39 Y-10.219 ;WIPE_END G1 X-15.389 Y-11.966 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.17 Y-11.884 E.00775 G3 X-16.973 Y-11.772 I-.788 J1.885 E.36381 G3 X-16.034 Y-12.041 I1.004 J1.733 E.03272 G3 X-15.428 Y-11.972 I.076 J2.042 E.02032 G1 X-15.528 Y-11.554 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.336 Y-11.483 E.00631 G3 X-16.566 Y-11.488 I-.622 J1.484 E.27185 G3 X-16.006 Y-11.607 I.637 J1.621 E.01768 G3 X-15.567 Y-11.559 I.048 J1.608 E.01362 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.336 Y-11.483 G1 X-15.145 Y-11.395 G1 X-14.97 Y-11.278 G1 X-14.811 Y-11.139 G1 X-14.672 Y-10.98 G1 X-14.555 Y-10.805 G1 X-14.462 Y-10.616 G1 X-14.394 Y-10.417 G1 X-14.353 Y-10.21 G1 X-14.349 Y-10.138 ;WIPE_END G1 X-14.457 Y-11.948 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-14.002 Y-11.948 E.01508 G1 X-14.002 Y-11.493 E.01508 G2 X-14.425 Y-11.923 I-1.955 J1.501 E.02007 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-14.002 Y-11.948 G1 X-14.002 Y-11.493 G1 X-14.215 Y-11.735 G1 X-14.425 Y-11.923 ;WIPE_END G1 X-22.049 Y-11.552 Z.8 F30000 G1 X-90.001 Y-8.246 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-90.197 Y-8.374 E.00777 G3 X-89.973 Y-11.772 I1.24 J-1.625 E.13353 G3 X-89.034 Y-12.041 I1.004 J1.733 E.03272 G3 X-89.969 Y-8.223 I.076 J2.042 E.25057 G1 X-89.759 Y-8.608 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-89.933 Y-8.719 E.00633 G3 X-89.566 Y-11.488 I.976 J-1.28 E.10393 G3 X-89.006 Y-11.607 I.637 J1.621 E.01768 G3 X-89.728 Y-8.586 I.048 J1.608 E.18149 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-89.933 Y-8.719 G1 X-90.089 Y-8.861 G1 X-90.228 Y-9.02 G1 X-90.345 Y-9.195 G1 X-90.438 Y-9.384 G1 X-90.506 Y-9.583 G1 X-90.547 Y-9.79 G1 X-90.56 Y-10 G1 X-90.547 Y-10.21 G1 X-90.533 Y-10.279 ;WIPE_END G1 X-90.898 Y-11.493 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-90.898 Y-11.948 E.01508 G1 X-90.443 Y-11.948 E.01508 G1 X-90.685 Y-11.735 E.01069 G1 X-90.872 Y-11.523 E.00936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-90.898 Y-11.948 G1 X-90.443 Y-11.948 G1 X-90.685 Y-11.735 G1 X-90.872 Y-11.523 ;WIPE_END G1 X-83.24 Y-11.612 Z.8 F30000 G1 X-19.66 Y-12.355 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-13.595 Y-12.355 E.20119 G1 X-13.595 Y50.355 E2.08021 G1 X-16.399 Y50.355 E.09303 G2 X-16.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-19.722 Y50.023 I-1.444 J1.451 E.19522 G1 X-19.501 Y50.355 E.01324 G1 X-85.399 Y50.355 E2.18599 G2 X-85.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-88.675 Y50.093 I-1.446 J1.446 E.19813 G1 X-88.501 Y50.355 E.01043 G1 X-91.305 Y50.355 E.09303 G1 X-91.305 Y-12.355 E2.08021 G1 X-84.805 Y-12.355 E.21562 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-19.7 Y-12.355 E.0131 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.7 Y-12.355 ;WIPE_END G1 X-17.901 Y-4.725 Z.8 F30000 G1 X-19.34 Y49.812 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.35 Y49.808 E.00031 G3 X-18.566 Y47.512 I1.392 J-.807 E.08443 G3 X-18.006 Y47.393 I.637 J1.621 E.01768 G3 X-19.232 Y49.984 I.048 J1.608 E.20201 G1 X-19.319 Y49.846 E.00502 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.35 Y49.808 G1 X-19.438 Y49.616 G1 X-19.506 Y49.417 G1 X-19.547 Y49.21 G1 X-19.56 Y49 G1 X-19.547 Y48.79 G1 X-19.506 Y48.583 G1 X-19.438 Y48.384 G1 X-19.345 Y48.195 G1 X-19.228 Y48.02 G1 X-19.191 Y47.978 ;WIPE_END G1 X-26.821 Y48.183 Z.8 F30000 G1 X-88.322 Y49.835 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-88.442 Y49.618 E.00761 G3 X-87.566 Y47.512 I1.485 J-.618 E.07791 G3 X-87.006 Y47.393 I.637 J1.621 E.01768 G3 X-88.309 Y49.872 I.048 J1.607 E.20603 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-88.442 Y49.618 G1 X-88.506 Y49.417 G1 X-88.547 Y49.21 G1 X-88.56 Y49 G1 X-88.547 Y48.79 G1 X-88.506 Y48.583 G1 X-88.438 Y48.384 G1 X-88.345 Y48.195 G1 X-88.228 Y48.02 G1 X-88.209 Y47.999 ;WIPE_END G1 X-82.499 Y42.935 Z.8 F30000 G1 X-19.66 Y-12.79 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-91.74 Y50.79 E2.41454 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-15.769 Y-5.423 Z.8 F30000 G1 X-14.947 Y-2.211 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537302 G1 F15000 G3 X-14.656 Y-2.439 I.509 J.349 E.01512 G1 X-14.453 Y-2.375 E.0086 G1 X-14.453 Y-7.487 E.20595 G1 X-14.947 Y-7.291 E.02142 G1 X-14.947 Y-2.251 E.20306 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.947 Y-4.251 ;WIPE_END G1 X-18.497 Y-7.644 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419416 G1 F15000 G1 X-17.517 Y-7.644 E.03008 G1 X-17.701 Y-7.758 E.00665 G1 X-18.043 Y-8.098 E.0148 G1 X-18.469 Y-7.672 E.01848 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-18.043 Y-8.098 G1 X-17.701 Y-7.758 G1 X-17.517 Y-7.644 G1 X-18.215 Y-7.644 ;WIPE_END G1 X-16.977 Y-.112 Z.8 F30000 G1 X-14.035 Y17.79 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420288 G1 F15000 G1 X-15.997 Y19.752 E.08531 G1 X-16.531 Y19.752 E.01641 G1 X-14.216 Y17.437 E.10067 G1 X-14.216 Y16.903 E.01641 G1 X-17.064 Y19.752 E.12388 G1 X-17.598 Y19.752 E.01641 G1 X-14.216 Y16.37 E.14709 G1 X-14.216 Y15.836 E.01641 G1 X-18.132 Y19.752 E.1703 G1 X-18.665 Y19.752 E.01641 G1 X-14.216 Y15.302 E.19351 G1 X-14.216 Y14.769 E.01641 G1 X-19.369 Y19.922 E.22409 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-17.954 Y18.507 ;WIPE_END G1 X-16.813 Y26.054 Z.8 F30000 G1 X-14.028 Y44.467 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-16.409 Y46.848 E.10354 G2 X-16.741 Y46.647 I-.932 J1.161 E.01198 G1 X-14.216 Y44.121 E.10984 G1 X-14.216 Y43.587 E.01641 G1 X-17.118 Y46.489 E.1262 G2 X-17.546 Y46.384 I-.615 J1.573 E.01359 G1 X-14.216 Y43.054 E.14481 G1 X-14.216 Y42.52 E.01641 G1 X-18.234 Y46.538 E.17473 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.412 Y48.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-21.448 Y49.752 E.04503 G1 X-21.981 Y49.752 E.01641 G1 X-20.494 Y48.264 E.0647 G3 X-18.686 Y46.456 I2.526 J.718 E.08211 G1 X-14.216 Y41.986 E.1944 G1 X-14.216 Y41.453 E.01641 G1 X-22.515 Y49.752 E.36092 G1 X-23.049 Y49.752 E.01641 G1 X-14.216 Y40.919 E.38413 G1 X-14.216 Y40.385 E.01641 G1 X-23.582 Y49.752 E.40734 G1 X-24.116 Y49.752 E.01641 G1 X-14.216 Y39.852 E.43055 G1 X-14.216 Y39.318 E.01641 G1 X-24.65 Y49.752 E.45376 G1 X-25.183 Y49.752 E.01641 G1 X-14.216 Y38.784 E.47697 G1 X-14.216 Y38.25 E.01641 G1 X-25.717 Y49.752 E.50017 G1 X-26.251 Y49.752 E.01641 G1 X-14.216 Y37.717 E.52338 G1 X-14.216 Y37.183 E.01641 G1 X-26.784 Y49.752 E.54659 G1 X-27.318 Y49.752 E.01641 G1 X-14.216 Y36.649 E.5698 G1 X-14.216 Y36.116 E.01641 G1 X-27.852 Y49.752 E.59301 G1 X-28.385 Y49.752 E.01641 G1 X-14.216 Y35.582 E.61622 G1 X-14.216 Y35.048 E.01641 G1 X-28.919 Y49.752 E.63943 G1 X-29.453 Y49.752 E.01641 G1 X-14.216 Y34.515 E.66264 G1 X-14.216 Y33.981 E.01641 G1 X-29.986 Y49.752 E.68584 G1 X-30.52 Y49.752 E.01641 G1 X-14.216 Y33.447 E.70905 G1 X-14.216 Y32.914 E.01641 G1 X-31.054 Y49.752 E.73226 G1 X-31.587 Y49.752 E.01641 G1 X-14.216 Y32.38 E.75547 G1 X-14.216 Y31.846 E.01641 G1 X-32.121 Y49.752 E.77868 G1 X-32.655 Y49.752 E.01641 G1 X-14.216 Y31.313 E.80189 G1 X-14.216 Y30.779 E.01641 G1 X-33.189 Y49.752 E.8251 G1 X-33.722 Y49.752 E.01641 G1 X-14.216 Y30.245 E.8483 G1 X-14.216 Y29.712 E.01641 G1 X-34.256 Y49.752 E.87151 G1 X-34.79 Y49.752 E.01641 G1 X-14.216 Y29.178 E.89472 G1 X-14.216 Y28.644 E.01641 G1 X-35.323 Y49.752 E.91793 G1 X-35.857 Y49.752 E.01641 G1 X-14.216 Y28.111 E.94114 G1 X-14.216 Y27.577 E.01641 G1 X-36.391 Y49.752 E.96435 G1 X-36.924 Y49.752 E.01641 G1 X-14.216 Y27.043 E.98756 G1 X-14.216 Y26.51 E.01641 G1 X-37.458 Y49.752 E1.01077 G1 X-37.992 Y49.752 E.01641 G1 X-14.216 Y25.976 E1.03397 G1 X-14.216 Y25.923 E.00163 G1 X-14.618 Y25.882 E.01244 G1 X-14.637 Y25.864 E.00082 G1 X-38.525 Y49.752 E1.03886 G1 X-39.059 Y49.752 E.01641 G1 X-15.573 Y26.266 E1.02137 G1 X-16.106 Y26.266 E.01641 G1 X-39.593 Y49.752 E1.02137 G1 X-40.126 Y49.752 E.01641 G1 X-16.64 Y26.266 E1.02137 G1 X-17.174 Y26.266 E.01641 G1 X-40.66 Y49.752 E1.02137 G1 X-41.194 Y49.752 E.01641 G1 X-17.707 Y26.266 E1.02137 G1 X-18.241 Y26.266 E.01641 G1 X-41.727 Y49.752 E1.02137 G1 X-42.261 Y49.752 E.01641 G1 X-18.775 Y26.266 E1.02137 G1 X-19.308 Y26.266 E.01641 G1 X-42.795 Y49.752 E1.02137 G1 X-43.328 Y49.752 E.01641 G1 X-19.825 Y26.248 E1.02213 G1 X-20.198 Y26.248 E.01148 G1 X-20.198 Y26.088 E.00493 G1 X-43.862 Y49.752 E1.0291 G1 X-44.396 Y49.752 E.01641 G1 X-20.198 Y25.554 E1.05231 G1 X-20.198 Y25.021 E.01641 G1 X-44.929 Y49.752 E1.07552 G1 X-45.463 Y49.752 E.01641 G1 X-20.198 Y24.487 E1.09873 G1 X-20.198 Y23.953 E.01641 G1 X-45.997 Y49.752 E1.12194 G1 X-46.531 Y49.752 E.01641 G1 X-20.198 Y23.419 E1.14515 G1 X-20.198 Y22.886 E.01641 G1 X-47.064 Y49.752 E1.16835 G1 X-47.598 Y49.752 E.01641 G1 X-20.198 Y22.352 E1.19156 G1 X-20.198 Y21.818 E.01641 G1 X-48.132 Y49.752 E1.21477 G1 X-48.665 Y49.752 E.01641 G1 X-20.198 Y21.285 E1.23798 G1 X-20.198 Y20.751 E.01641 G1 X-31.202 Y31.755 E.47853 G1 X-31.202 Y32.248 E.01517 G1 X-31.695 Y32.248 E.01517 G1 X-49.199 Y49.752 E.76121 G1 X-49.733 Y49.752 E.01641 G1 X-32.229 Y32.248 E.76121 G1 X-32.762 Y32.248 E.01641 G1 X-50.266 Y49.752 E.76121 G1 X-50.8 Y49.752 E.01641 G1 X-33.296 Y32.248 E.76121 G1 X-33.83 Y32.248 E.01641 G1 X-51.334 Y49.752 E.76121 G1 X-51.867 Y49.752 E.01641 G1 X-34.364 Y32.248 E.76121 G1 X-34.897 Y32.248 E.01641 G1 X-52.401 Y49.752 E.76121 G1 X-52.935 Y49.752 E.01641 G1 X-35.431 Y32.248 E.76121 G1 X-35.965 Y32.248 E.01641 G1 X-53.468 Y49.752 E.76121 G1 X-54.002 Y49.752 E.01641 G1 X-36.498 Y32.248 E.76121 G1 X-37.032 Y32.248 E.01641 G1 X-54.536 Y49.752 E.76121 G1 X-55.069 Y49.752 E.01641 G1 X-37.566 Y32.248 E.76121 G1 X-38.099 Y32.248 E.01641 G1 X-55.603 Y49.752 E.76121 G1 X-56.137 Y49.752 E.01641 G1 X-38.633 Y32.248 E.76121 G1 X-39.167 Y32.248 E.01641 G1 X-56.67 Y49.752 E.76121 G1 X-57.204 Y49.752 E.01641 G1 X-39.7 Y32.248 E.76121 G1 X-40.234 Y32.248 E.01641 G1 X-57.738 Y49.752 E.76121 G1 X-58.271 Y49.752 E.01641 G1 X-40.768 Y32.248 E.76121 G1 X-41.301 Y32.248 E.01641 G1 X-58.805 Y49.752 E.76121 G1 X-59.339 Y49.752 E.01641 G1 X-41.835 Y32.248 E.76121 G1 X-42.369 Y32.248 E.01641 G1 X-59.872 Y49.752 E.76121 G1 X-60.406 Y49.752 E.01641 G1 X-42.902 Y32.248 E.76121 G1 X-43.436 Y32.248 E.01641 G1 X-60.94 Y49.752 E.76121 G1 X-61.474 Y49.752 E.01641 G1 X-43.97 Y32.248 E.76121 G1 X-44.503 Y32.248 E.01641 G1 X-62.007 Y49.752 E.76121 G1 X-62.541 Y49.752 E.01641 G1 X-45.037 Y32.248 E.76121 G1 X-45.571 Y32.248 E.01641 G1 X-63.075 Y49.752 E.76121 G1 X-63.608 Y49.752 E.01641 G1 X-46.104 Y32.248 E.76121 G1 X-46.638 Y32.248 E.01641 G1 X-64.142 Y49.752 E.76121 G1 X-64.676 Y49.752 E.01641 G1 X-47.172 Y32.248 E.76121 G1 X-47.705 Y32.248 E.01641 G1 X-65.209 Y49.752 E.76121 G1 X-65.743 Y49.752 E.01641 G1 X-48.239 Y32.248 E.76121 G1 X-48.773 Y32.248 E.01641 G1 X-66.277 Y49.752 E.76121 G1 X-66.81 Y49.752 E.01641 G1 X-49.307 Y32.248 E.76121 G1 X-49.84 Y32.248 E.01641 G1 X-67.344 Y49.752 E.76121 G1 X-67.878 Y49.752 E.01641 G1 X-50.374 Y32.248 E.76121 G1 X-50.908 Y32.248 E.01641 G1 X-68.411 Y49.752 E.76121 G1 X-68.945 Y49.752 E.01641 G1 X-51.441 Y32.248 E.76121 G1 X-51.975 Y32.248 E.01641 G1 X-69.479 Y49.752 E.76121 G1 X-70.012 Y49.752 E.01641 G1 X-52.509 Y32.248 E.76121 G1 X-53.042 Y32.248 E.01641 G1 X-70.546 Y49.752 E.76121 G1 X-71.08 Y49.752 E.01641 G1 X-53.576 Y32.248 E.76121 G1 X-54.11 Y32.248 E.01641 G1 X-71.613 Y49.752 E.76121 G1 X-72.147 Y49.752 E.01641 G1 X-54.643 Y32.248 E.76121 G1 X-55.177 Y32.248 E.01641 G1 X-72.681 Y49.752 E.76121 G1 X-73.214 Y49.752 E.01641 G1 X-55.711 Y32.248 E.76121 G1 X-56.244 Y32.248 E.01641 G1 X-73.748 Y49.752 E.76121 G1 X-74.282 Y49.752 E.01641 G1 X-56.778 Y32.248 E.76121 G1 X-57.312 Y32.248 E.01641 G1 X-74.816 Y49.752 E.76121 G1 X-75.349 Y49.752 E.01641 G1 X-57.845 Y32.248 E.76121 G1 X-58.379 Y32.248 E.01641 G1 X-75.883 Y49.752 E.76121 G1 X-76.417 Y49.752 E.01641 G1 X-58.913 Y32.248 E.76121 G1 X-59.446 Y32.248 E.01641 G1 X-76.95 Y49.752 E.76121 G1 X-77.484 Y49.752 E.01641 G1 X-59.98 Y32.248 E.76121 G1 X-60.514 Y32.248 E.01641 G1 X-78.018 Y49.752 E.76121 G1 X-78.551 Y49.752 E.01641 G1 X-61.047 Y32.248 E.76121 G1 X-61.581 Y32.248 E.01641 G1 X-79.085 Y49.752 E.76121 G1 X-79.619 Y49.752 E.01641 G1 X-62.115 Y32.248 E.76121 G1 X-62.649 Y32.248 E.01641 G1 X-80.152 Y49.752 E.76121 G1 X-80.686 Y49.752 E.01641 G1 X-63.182 Y32.248 E.76121 G1 X-63.716 Y32.248 E.01641 G1 X-81.22 Y49.752 E.76121 G1 X-81.753 Y49.752 E.01641 G1 X-64.25 Y32.248 E.76121 G1 X-64.783 Y32.248 E.01641 G1 X-82.287 Y49.752 E.76121 G1 X-82.821 Y49.752 E.01641 G1 X-65.317 Y32.248 E.76121 G1 X-65.851 Y32.248 E.01641 G1 X-83.354 Y49.752 E.76121 G1 X-83.888 Y49.752 E.01641 G1 X-66.384 Y32.248 E.76121 G1 X-66.918 Y32.248 E.01641 G1 X-84.407 Y49.737 E.76056 G2 X-84.306 Y49.102 I-2.89 J-.785 E.0198 G1 X-67.452 Y32.248 E.73296 G1 X-67.985 Y32.248 E.01641 G1 X-84.333 Y48.596 E.71095 G2 X-84.439 Y48.168 I-1.678 J.187 E.0136 G1 X-68.519 Y32.248 E.69233 G1 X-69.053 Y32.248 E.01641 G1 X-84.596 Y47.792 E.67597 G2 X-84.798 Y47.46 I-1.363 J.599 E.01198 G1 X-69.586 Y32.248 E.66152 G1 X-70.12 Y32.248 E.01641 G1 X-85.039 Y47.167 E.6488 G2 X-85.318 Y46.913 I-1.106 J.933 E.01165 G1 X-70.654 Y32.248 E.63774 G1 X-71.187 Y32.248 E.01641 G1 X-85.637 Y46.698 E.6284 G2 X-86.002 Y46.529 I-.826 J1.298 E.01239 G1 X-71.721 Y32.248 E.62103 G1 X-72.255 Y32.248 E.01641 G1 X-86.416 Y46.409 E.61584 G2 X-86.893 Y46.353 I-.453 J1.784 E.01482 G1 X-72.788 Y32.248 E.61339 G1 X-73.322 Y32.248 E.01641 G1 X-87.722 Y46.648 E.62622 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.302 Y48.228 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.56 Y49.486 E.05469 G1 X-90.702 Y49.158 E.01098 G1 X-90.702 Y49.094 E.00196 G1 X-73.698 Y32.09 E.73946 G1 X-73.698 Y31.557 E.01641 G1 X-90.702 Y48.561 E.73946 G1 X-90.702 Y48.027 E.01641 G1 X-73.698 Y31.023 E.73946 G1 X-73.698 Y30.489 E.01641 G1 X-90.702 Y47.493 E.73946 G1 X-90.702 Y46.96 E.01641 G1 X-73.698 Y29.956 E.73946 G1 X-73.698 Y29.422 E.01641 G1 X-90.702 Y46.426 E.73946 G1 X-90.702 Y45.892 E.01641 G1 X-73.698 Y28.888 E.73946 G1 X-73.698 Y28.355 E.01641 M73 P8 R99 G1 X-90.702 Y45.358 E.73946 G1 X-90.702 Y44.825 E.01641 G1 X-73.698 Y27.821 E.73946 G1 X-73.698 Y27.287 E.01641 G1 X-90.702 Y44.291 E.73946 G1 X-90.702 Y43.757 E.01641 G1 X-73.698 Y26.754 E.73946 G1 X-73.698 Y26.22 E.01641 G1 X-90.702 Y43.224 E.73946 G1 X-90.702 Y42.69 E.01641 G1 X-73.698 Y25.686 E.73946 G1 X-73.698 Y25.153 E.01641 G1 X-90.702 Y42.156 E.73946 G1 X-90.702 Y41.623 E.01641 G1 X-73.698 Y24.619 E.73946 G1 X-73.698 Y24.085 E.01641 G1 X-90.702 Y41.089 E.73946 G1 X-90.702 Y40.555 E.01641 G1 X-73.698 Y23.552 E.73946 G1 X-73.698 Y23.018 E.01641 G1 X-90.702 Y40.022 E.73946 G1 X-90.702 Y39.488 E.01641 G1 X-73.698 Y22.484 E.73946 G1 X-73.698 Y21.951 E.01641 G1 X-90.702 Y38.954 E.73946 G1 X-90.702 Y38.421 E.01641 G1 X-73.698 Y21.417 E.73946 G1 X-73.698 Y20.883 E.01641 G1 X-90.702 Y37.887 E.73946 G1 X-90.702 Y37.353 E.01641 G1 X-73.698 Y20.35 E.73946 G1 X-73.698 Y19.816 E.01641 G1 X-90.702 Y36.82 E.73946 G1 X-90.702 Y36.286 E.01641 G1 X-73.698 Y19.282 E.73946 G1 X-73.698 Y18.748 E.01641 G1 X-90.702 Y35.752 E.73946 G1 X-90.702 Y35.219 E.01641 G1 X-73.698 Y18.215 E.73946 G1 X-73.698 Y17.681 E.01641 G1 X-90.702 Y34.685 E.73946 G1 X-90.702 Y34.151 E.01641 G1 X-73.698 Y17.147 E.73946 G1 X-73.698 Y16.614 E.01641 G1 X-90.702 Y33.618 E.73946 G1 X-90.702 Y33.084 E.01641 G1 X-73.698 Y16.08 E.73946 G1 X-73.698 Y15.546 E.01641 G1 X-90.702 Y32.55 E.73946 G1 X-90.702 Y32.017 E.01641 G1 X-73.698 Y15.013 E.73946 G1 X-73.698 Y14.479 E.01641 G1 X-84.702 Y25.483 E.47853 G1 X-84.702 Y24.949 E.01641 G1 X-73.698 Y13.945 E.47853 G1 X-73.698 Y13.412 E.01641 G1 X-84.702 Y24.415 E.47853 G1 X-84.702 Y23.882 E.01641 G1 X-73.698 Y12.878 E.47853 G1 X-73.698 Y12.344 E.01641 G1 X-84.702 Y23.348 E.47853 G1 X-84.702 Y22.814 E.01641 G1 X-73.698 Y11.811 E.47853 G1 X-73.698 Y11.277 E.01641 G1 X-84.702 Y22.281 E.47853 G1 X-84.702 Y21.747 E.01641 G1 X-73.698 Y10.743 E.47853 G1 X-73.698 Y10.21 E.01641 G1 X-84.702 Y21.213 E.47853 G1 X-84.702 Y20.68 E.01641 G1 X-73.698 Y9.676 E.47853 G1 X-73.698 Y9.142 E.01641 G1 X-84.702 Y20.146 E.47853 G1 X-84.702 Y19.752 E.01212 G1 X-84.841 Y19.752 E.00429 G1 X-73.528 Y8.439 E.49198 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.297 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.702 Y31.483 E.23503 G1 X-90.702 Y30.949 E.01641 G1 X-86.001 Y26.248 E.20444 G1 X-86.535 Y26.248 E.01641 G1 X-90.702 Y30.415 E.18123 G1 X-90.702 Y29.882 E.01641 G1 X-87.068 Y26.248 E.15802 G1 X-87.602 Y26.248 E.01641 G1 X-90.872 Y29.518 E.14219 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-89.457 Y28.104 ;WIPE_END G1 X-81.837 Y28.535 Z.8 F30000 G1 X-31.372 Y31.391 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.198 Y20.217 E.48591 G1 X-20.198 Y19.752 E.01432 G1 X-19.733 Y19.752 E.01432 G1 X-14.216 Y14.235 E.23992 G1 X-14.216 Y13.701 E.01641 G1 X-31.202 Y30.688 E.7387 G1 X-31.202 Y30.154 E.01641 G1 X-14.216 Y13.168 E.7387 G1 X-14.216 Y12.634 E.01641 G1 X-31.202 Y29.62 E.7387 G1 X-31.202 Y29.086 E.01641 G1 X-14.216 Y12.1 E.7387 G1 X-14.216 Y11.567 E.01641 G1 X-31.202 Y28.553 E.7387 G1 X-31.202 Y28.019 E.01641 G1 X-14.216 Y11.033 E.7387 G1 X-14.216 Y10.499 E.01641 G1 X-31.202 Y27.485 E.7387 G1 X-31.202 Y26.952 E.01641 G1 X-14.216 Y9.965 E.7387 G1 X-14.216 Y9.432 E.01641 G1 X-31.202 Y26.418 E.7387 G1 X-31.202 Y25.884 E.01641 G1 X-14.216 Y8.898 E.7387 G1 X-14.216 Y8.364 E.01641 G1 X-31.202 Y25.351 E.7387 G1 X-31.202 Y24.817 E.01641 G1 X-14.216 Y7.831 E.7387 G1 X-14.216 Y7.297 E.01641 G1 X-31.202 Y24.283 E.7387 G1 X-31.202 Y23.75 E.01641 G1 X-14.216 Y6.763 E.7387 G1 X-14.216 Y6.23 E.01641 G1 X-31.202 Y23.216 E.7387 G1 X-31.202 Y22.682 E.01641 G1 X-14.216 Y5.696 E.7387 G1 X-14.216 Y5.162 E.01641 G1 X-31.202 Y22.149 E.7387 G1 X-31.202 Y21.615 E.01641 G1 X-14.216 Y4.629 E.7387 G1 X-14.216 Y4.095 E.01641 G1 X-31.202 Y21.081 E.7387 G1 X-31.202 Y20.548 E.01641 G1 X-14.216 Y3.561 E.7387 G1 X-14.216 Y3.028 E.01641 G1 X-31.202 Y20.014 E.7387 G1 X-31.202 Y19.48 E.01641 M73 P9 R99 G1 X-14.216 Y2.494 E.7387 G1 X-14.216 Y1.96 E.01641 G1 X-31.202 Y18.947 E.7387 G1 X-31.202 Y18.413 E.01641 G1 X-14.216 Y1.427 E.7387 G1 X-14.216 Y.893 E.01641 G1 X-31.202 Y17.879 E.7387 G1 X-31.202 Y17.346 E.01641 G1 X-14.216 Y.359 E.7387 G1 X-14.216 Y-.174 E.01641 G1 X-31.202 Y16.812 E.7387 G1 X-31.202 Y16.278 E.01641 G1 X-14.216 Y-.708 E.7387 G1 X-14.216 Y-1.242 E.01641 G1 X-31.202 Y15.745 E.7387 G1 X-31.202 Y15.211 E.01641 G1 X-14.216 Y-1.775 E.7387 G1 X-14.216 Y-1.83 E.00168 G1 X-14.559 Y-1.928 E.01097 G1 X-14.578 Y-1.947 E.00083 G1 X-31.202 Y14.677 E.72296 G1 X-31.202 Y14.143 E.01641 G1 X-15.524 Y-1.534 E.6818 G1 X-16.058 Y-1.534 E.01641 G1 X-31.202 Y13.61 E.65859 G1 X-31.202 Y13.076 E.01641 G1 X-16.591 Y-1.534 E.63538 G1 X-17.125 Y-1.534 E.01641 G1 X-31.202 Y12.542 E.61217 G1 X-31.202 Y12.009 E.01641 G1 X-17.659 Y-1.534 E.58897 G1 X-18.192 Y-1.534 E.01641 G1 X-31.202 Y11.475 E.56576 G1 X-31.202 Y10.941 E.01641 G1 X-18.726 Y-1.534 E.54255 G1 X-19.26 Y-1.534 E.01641 G1 X-31.202 Y10.408 E.51934 G1 X-31.202 Y9.874 E.01641 G1 X-19.776 Y-1.552 E.49689 G1 X-20.198 Y-1.552 E.01298 G1 X-20.198 Y-1.663 E.00343 G1 X-31.202 Y9.34 E.47853 G1 X-31.202 Y8.807 E.01641 G1 X-20.198 Y-2.197 E.47853 G1 X-20.198 Y-2.731 E.01641 G1 X-31.202 Y8.273 E.47853 G1 X-31.202 Y7.752 E.01602 G1 X-31.214 Y7.752 E.00039 G1 X-20.198 Y-3.264 E.47908 G1 X-20.198 Y-3.798 E.01641 G1 X-31.748 Y7.752 E.50229 G1 X-32.282 Y7.752 E.01641 G1 X-20.198 Y-4.332 E.5255 G1 X-20.198 Y-4.865 E.01641 G1 X-32.815 Y7.752 E.54871 G1 X-33.349 Y7.752 E.01641 G1 X-20.198 Y-5.399 E.57191 G1 X-20.198 Y-5.933 E.01641 G1 X-33.883 Y7.752 E.59512 G1 X-34.417 Y7.752 E.01641 G1 X-20.028 Y-6.636 E.62571 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.386 Y-7.278 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-18.143 Y-8.521 E.05405 G3 X-18.337 Y-8.861 I1.192 J-.907 E.01206 G1 X-19.75 Y-7.448 E.06144 G1 X-20.198 Y-7.448 E.01377 G1 X-20.198 Y-7 E.01377 G1 X-34.95 Y7.752 E.64154 G1 X-35.484 Y7.752 E.01641 G1 X-18.487 Y-9.245 E.73916 G3 X-18.58 Y-9.685 I3.695 J-1.011 E.01385 G1 X-36.018 Y7.752 E.75832 G1 X-36.551 Y7.752 E.01641 G1 X-18.587 Y-10.212 E.78124 G3 X-18.44 Y-10.893 I2.676 J.221 E.02146 G1 X-37.085 Y7.752 E.81082 G1 X-37.619 Y7.752 E.01641 G1 X-18.115 Y-11.752 E.84818 G1 X-18.648 Y-11.752 E.01641 G1 X-38.152 Y7.752 E.84818 G1 X-38.686 Y7.752 E.01641 G1 X-19.182 Y-11.752 E.84818 G1 X-19.716 Y-11.752 E.01641 G1 X-39.22 Y7.752 E.84818 G1 X-39.753 Y7.752 E.01641 G1 X-20.25 Y-11.752 E.84818 G1 X-20.698 Y-11.752 E.01379 G1 X-20.698 Y-11.837 E.00262 G1 X-40.287 Y7.752 E.85188 G1 X-40.821 Y7.752 E.01641 G1 X-20.698 Y-12.371 E.87509 G1 X-20.698 Y-12.904 E.01641 G1 X-41.354 Y7.752 E.8983 G1 X-41.888 Y7.752 E.01641 G1 X-20.698 Y-13.438 E.92151 G1 X-20.698 Y-13.972 E.01641 G1 X-42.422 Y7.752 E.94472 G1 X-42.955 Y7.752 E.01641 G1 X-20.698 Y-14.505 E.96793 G1 X-20.698 Y-15.039 E.01641 G1 X-43.489 Y7.752 E.99114 G1 X-44.023 Y7.752 E.01641 G1 X-20.698 Y-15.573 E1.01434 G1 X-20.698 Y-16.106 E.01641 G1 X-44.556 Y7.752 E1.03755 G1 X-45.09 Y7.752 E.01641 G1 X-20.698 Y-16.64 E1.06076 G1 X-20.698 Y-17.174 E.01641 G1 X-45.624 Y7.752 E1.08397 G1 X-46.157 Y7.752 E.01641 G1 X-20.698 Y-17.707 E1.10718 G1 X-20.698 Y-18.241 E.01641 G1 X-46.691 Y7.752 E1.13039 G1 X-47.225 Y7.752 E.01641 G1 X-20.698 Y-18.775 E1.1536 G1 X-20.698 Y-19.308 E.01641 G1 X-47.759 Y7.752 E1.1768 G1 X-48.292 Y7.752 E.01641 G1 X-20.698 Y-19.842 E1.20001 G1 X-20.698 Y-20.376 E.01641 G1 X-48.826 Y7.752 E1.22322 G1 X-49.36 Y7.752 E.01641 G1 X-20.698 Y-20.91 E1.24643 G1 X-20.698 Y-21.443 E.01641 G1 X-49.893 Y7.752 E1.26964 G1 X-50.427 Y7.752 E.01641 G1 X-20.698 Y-21.977 E1.29285 G1 X-20.698 Y-22.511 E.01641 G1 X-50.961 Y7.752 E1.31606 G1 X-51.494 Y7.752 E.01641 G1 X-20.698 Y-23.044 E1.33927 G1 X-20.698 Y-23.578 E.01641 G1 X-52.028 Y7.752 E1.36247 G1 X-52.562 Y7.752 E.01641 G1 X-20.698 Y-24.112 E1.38568 G1 X-20.698 Y-24.645 E.01641 G1 X-53.095 Y7.752 E1.40889 G1 X-53.629 Y7.752 E.01641 G1 X-21.125 Y-24.752 E1.41353 G1 X-21.659 Y-24.752 E.01641 G1 X-54.163 Y7.752 E1.41353 G1 X-54.696 Y7.752 E.01641 G1 X-22.193 Y-24.752 E1.41353 G1 X-22.726 Y-24.752 E.01641 G1 X-55.23 Y7.752 E1.41353 G1 X-55.764 Y7.752 E.01641 G1 X-23.26 Y-24.752 E1.41353 G1 X-23.794 Y-24.752 E.01641 G1 X-56.297 Y7.752 E1.41353 G1 X-56.831 Y7.752 E.01641 G1 X-24.327 Y-24.752 E1.41353 G1 X-24.861 Y-24.752 E.01641 G1 X-57.365 Y7.752 E1.41353 G1 X-57.898 Y7.752 E.01641 G1 X-25.395 Y-24.752 E1.41353 G1 X-25.928 Y-24.752 E.01641 G1 X-58.432 Y7.752 E1.41353 G1 X-58.966 Y7.752 E.01641 G1 X-26.462 Y-24.752 E1.41353 G1 X-26.996 Y-24.752 E.01641 G1 X-59.499 Y7.752 E1.41353 G1 X-60.033 Y7.752 E.01641 G1 X-27.529 Y-24.752 E1.41353 G1 X-28.063 Y-24.752 E.01641 G1 X-60.567 Y7.752 E1.41353 G1 X-61.1 Y7.752 E.01641 G1 X-28.597 Y-24.752 E1.41353 G1 X-29.13 Y-24.752 E.01641 G1 X-61.634 Y7.752 E1.41353 G1 X-62.168 Y7.752 E.01641 G1 X-29.664 Y-24.752 E1.41353 G1 X-30.198 Y-24.752 E.01641 G1 X-62.702 Y7.752 E1.41353 G1 X-63.235 Y7.752 E.01641 G1 X-30.731 Y-24.752 E1.41353 G1 X-31.265 Y-24.752 E.01641 G1 X-63.769 Y7.752 E1.41353 G1 X-64.303 Y7.752 E.01641 G1 X-31.799 Y-24.752 E1.41353 G1 X-32.332 Y-24.752 E.01641 G1 X-64.836 Y7.752 E1.41353 G1 X-65.37 Y7.752 E.01641 G1 X-32.866 Y-24.752 E1.41353 G1 X-33.4 Y-24.752 E.01641 G1 X-65.904 Y7.752 E1.41353 G1 X-66.437 Y7.752 E.01641 G1 X-33.933 Y-24.752 E1.41353 G1 X-34.467 Y-24.752 E.01641 G1 X-66.971 Y7.752 E1.41353 G1 X-67.505 Y7.752 E.01641 G1 X-35.001 Y-24.752 E1.41353 G1 X-35.535 Y-24.752 E.01641 G1 X-68.038 Y7.752 E1.41353 G1 X-68.572 Y7.752 E.01641 G1 X-36.068 Y-24.752 E1.41353 G1 X-36.602 Y-24.752 E.01641 G1 X-69.106 Y7.752 E1.41353 G1 X-69.639 Y7.752 E.01641 G1 X-37.136 Y-24.752 E1.41353 G1 X-37.669 Y-24.752 E.01641 G1 X-70.173 Y7.752 E1.41353 G1 X-70.707 Y7.752 E.01641 G1 X-38.203 Y-24.752 E1.41353 G1 X-38.737 Y-24.752 E.01641 G1 X-71.24 Y7.752 E1.41353 G1 X-71.774 Y7.752 E.01641 G1 X-39.27 Y-24.752 E1.41353 G1 X-39.804 Y-24.752 E.01641 G1 X-72.308 Y7.752 E1.41353 G1 X-72.841 Y7.752 E.01641 G1 X-40.338 Y-24.752 E1.41353 G1 X-40.871 Y-24.752 E.01641 G1 X-85.375 Y19.752 E1.93538 G1 X-85.909 Y19.752 E.01641 G1 X-41.405 Y-24.752 E1.93538 G1 X-41.939 Y-24.752 E.01641 G1 X-86.425 Y19.734 E1.93462 G1 X-86.959 Y19.734 E.01641 G1 X-42.472 Y-24.752 E1.93462 G1 X-43.006 Y-24.752 E.01641 G1 X-87.492 Y19.734 E1.93462 G1 X-88.026 Y19.734 E.01641 G1 X-43.54 Y-24.752 E1.93462 G1 X-44.073 Y-24.752 E.01641 G1 X-88.56 Y19.734 E1.93462 G1 X-89.093 Y19.734 E.01641 G1 X-44.607 Y-24.752 E1.93462 G1 X-45.141 Y-24.752 E.01641 G1 X-89.627 Y19.734 E1.93462 G1 X-89.692 Y19.734 E.00199 G1 X-89.887 Y19.539 E.00851 G1 X-90.531 Y20.182 E.02799 G3 X-90.559 Y20.133 I.055 J-.063 E.00179 G1 X-45.674 Y-24.752 E1.95194 G1 X-46.208 Y-24.752 E.01641 G1 X-90.684 Y19.724 E1.93419 G1 X-90.684 Y19.191 E.01641 G1 X-46.742 Y-24.752 E1.91098 G1 X-47.275 Y-24.752 E.01641 G1 X-90.684 Y18.657 E1.88777 G1 X-90.684 Y18.123 E.01641 G1 X-47.809 Y-24.752 E1.86456 G1 X-48.343 Y-24.752 E.01641 G1 X-90.684 Y17.59 E1.84135 G1 X-90.684 Y17.056 E.01641 G1 X-48.876 Y-24.752 E1.81814 G1 X-49.41 Y-24.752 E.01641 G1 X-90.684 Y16.522 E1.79494 G1 X-90.684 Y15.989 E.01641 G1 X-49.944 Y-24.752 E1.77173 G1 X-50.478 Y-24.752 E.01641 G1 X-90.684 Y15.455 E1.74852 G1 X-90.684 Y14.921 E.01641 G1 X-51.011 Y-24.752 E1.72531 G1 X-51.545 Y-24.752 E.01641 G1 X-90.684 Y14.388 E1.7021 G1 X-90.684 Y13.854 E.01641 G1 X-52.079 Y-24.752 E1.67889 G1 X-52.612 Y-24.752 E.01641 G1 X-90.684 Y13.32 E1.65568 G1 X-90.684 Y12.787 E.01641 G1 X-53.146 Y-24.752 E1.63248 G1 X-53.68 Y-24.752 E.01641 G1 X-90.684 Y12.253 E1.60927 G1 X-90.684 Y11.719 E.01641 G1 X-54.213 Y-24.752 E1.58606 G1 X-54.747 Y-24.752 E.01641 G1 X-90.684 Y11.186 E1.56285 G1 X-90.684 Y10.652 E.01641 G1 X-55.281 Y-24.752 E1.53964 G1 X-55.814 Y-24.752 E.01641 G1 X-90.684 Y10.118 E1.51643 G1 X-90.684 Y9.584 E.01641 G1 X-56.348 Y-24.752 E1.49322 G1 X-56.882 Y-24.752 E.01641 G1 X-90.684 Y9.051 E1.47001 G1 X-90.684 Y8.517 E.01641 G1 X-57.415 Y-24.752 E1.44681 G1 X-57.949 Y-24.752 E.01641 G1 X-90.684 Y7.983 E1.4236 G1 X-90.684 Y7.45 E.01641 G1 X-58.483 Y-24.752 E1.40039 G1 X-59.016 Y-24.752 E.01641 G1 X-90.684 Y6.916 E1.37718 G1 X-90.684 Y6.382 E.01641 G1 X-59.55 Y-24.752 E1.35397 G1 X-60.084 Y-24.752 E.01641 G1 X-90.684 Y5.849 E1.33076 G1 X-90.684 Y5.315 E.01641 G1 X-60.617 Y-24.752 E1.30755 G1 X-61.151 Y-24.752 E.01641 G1 X-90.702 Y4.799 E1.28511 G1 X-90.702 Y4.265 E.01641 G1 X-61.685 Y-24.752 E1.2619 G1 X-62.218 Y-24.752 E.01641 G1 X-84.702 Y-2.268 E.97776 G1 X-84.702 Y-2.802 E.01641 G1 X-62.752 Y-24.752 E.95455 G1 X-63.286 Y-24.752 E.01641 G1 X-84.702 Y-3.336 E.93134 G1 X-84.702 Y-3.87 E.01641 G1 X-63.819 Y-24.752 E.90813 G1 X-64.353 Y-24.752 E.01641 G1 X-84.702 Y-4.403 E.88493 G1 X-84.702 Y-4.937 E.01641 G1 X-64.887 Y-24.752 E.86172 G1 X-65.421 Y-24.752 E.01641 G1 X-84.702 Y-5.471 E.83851 G1 X-84.702 Y-6.004 E.01641 G1 X-65.954 Y-24.752 E.8153 G1 X-66.488 Y-24.752 E.01641 G1 X-84.702 Y-6.538 E.79209 G1 X-84.702 Y-7.072 E.01641 G1 X-67.022 Y-24.752 E.76888 G1 X-67.555 Y-24.752 E.01641 G1 X-84.842 Y-7.466 E.75175 G1 X-85.375 Y-7.466 E.01641 G1 X-68.089 Y-24.752 E.75175 G1 X-68.623 Y-24.752 E.01641 G1 X-85.909 Y-7.466 E.75175 G1 X-86.443 Y-7.466 E.01641 G1 X-69.156 Y-24.752 E.75175 G1 X-69.69 Y-24.752 E.01641 G1 X-86.976 Y-7.466 E.75175 G1 X-87.51 Y-7.466 E.01641 G1 X-70.224 Y-24.752 E.75175 G1 X-70.757 Y-24.752 E.01641 G1 X-86.489 Y-9.02 E.68416 G2 X-86.317 Y-9.726 I-2.784 J-1.053 E.0224 G1 X-71.291 Y-24.752 E.65346 G1 X-71.825 Y-24.752 E.01641 G1 X-84.202 Y-12.375 E.53826 G1 X-84.202 Y-12.908 E.01641 G1 X-72.358 Y-24.752 E.51505 G1 X-72.892 Y-24.752 E.01641 G1 X-84.202 Y-13.442 E.49184 G1 X-84.202 Y-13.976 E.01641 G1 X-73.426 Y-24.752 E.46863 G1 X-73.959 Y-24.752 E.01641 G1 X-84.202 Y-14.509 E.44543 G1 X-84.202 Y-15.043 E.01641 G1 X-74.493 Y-24.752 E.42222 G1 X-75.027 Y-24.752 E.01641 G1 X-84.202 Y-15.577 E.39901 G1 X-84.202 Y-16.11 E.01641 G1 X-75.56 Y-24.752 E.3758 G1 X-76.094 Y-24.752 E.01641 G1 X-84.202 Y-16.644 E.35259 G1 X-84.202 Y-17.178 E.01641 G1 X-76.628 Y-24.752 E.32938 G1 X-77.161 Y-24.752 E.01641 G1 X-84.202 Y-17.711 E.30617 G1 X-84.202 Y-18.245 E.01641 G1 X-77.695 Y-24.752 E.28297 G1 X-78.229 Y-24.752 E.01641 G1 X-84.202 Y-18.779 E.25976 G1 X-84.202 Y-19.313 E.01641 G1 X-78.763 Y-24.752 E.23655 G1 X-79.296 Y-24.752 E.01641 G1 X-84.202 Y-19.846 E.21334 G1 X-84.202 Y-20.38 E.01641 G1 X-79.83 Y-24.752 E.19013 G1 X-80.364 Y-24.752 E.01641 G1 X-84.202 Y-20.914 E.16692 G1 X-84.202 Y-21.447 E.01641 G1 X-80.897 Y-24.752 E.14371 G1 X-81.431 Y-24.752 E.01641 G1 X-84.202 Y-21.981 E.1205 G1 X-84.202 Y-22.515 E.01641 G1 X-81.965 Y-24.752 E.0973 G1 X-82.498 Y-24.752 E.01641 G1 X-84.202 Y-23.048 E.07409 G1 X-84.202 Y-23.582 E.01641 G1 X-83.032 Y-24.752 E.05088 G1 X-83.566 Y-24.752 E.01641 G1 X-84.372 Y-23.946 E.03505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.655 Y-11.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-86.316 Y-10.26 E.07225 G2 X-86.398 Y-10.712 I-3.732 J.445 E.01412 G1 X-85.358 Y-11.752 E.04523 G1 X-85.892 Y-11.752 E.01641 G1 X-86.543 Y-11.1 E.02833 G2 X-86.734 Y-11.444 I-1.4 J.551 E.01211 G1 X-86.256 Y-11.922 E.02077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.249 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.702 Y3.732 E.23715 G1 X-90.702 Y3.198 E.01641 G1 X-85.952 Y-1.552 E.20656 G1 X-86.486 Y-1.552 E.01641 G1 X-90.702 Y2.664 E.18335 G1 X-90.702 Y2.13 E.01641 G1 X-87.02 Y-1.552 E.16014 G1 X-87.553 Y-1.552 E.01641 G1 X-90.872 Y1.766 E.14431 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-89.457 Y.352 ;WIPE_END G1 X-87.857 Y-7.11 Z.8 F30000 G1 X-87.757 Y-7.577 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-87.82 Y-7.54 E.00204 G1 X-87.755 Y-7.505 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-87.82 Y-7.54 G1 X-87.757 Y-7.577 ;WIPE_END G1 X-88.244 Y-1.356 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-89.706 Y-1.356 E.04491 ;WIDTH:0.43955 G1 X-89.788 Y-1.405 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y-1.454 E.0034 ;WIDTH:0.537152 G1 X-89.953 Y-1.502 E.00386 G1 X-89.953 Y-7.291 E.23314 G1 X-90.425 Y-7.498 E.02077 G1 X-90.447 Y-7.487 E.001 G1 X-90.447 Y-1.544 E.23934 ;WIDTH:0.517753 G1 X-90.467 Y-1.263 E.0109 ;WIDTH:0.478651 G1 X-90.486 Y-.982 E.01001 ;WIDTH:0.422183 G1 X-90.506 Y-.701 E.00871 G1 X-90.506 Y.906 E.04966 G1 X-88.272 Y-1.328 E.09762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.275 Y-.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.51998 G1 F15000 G1 X-89.803 Y-.936 E.02051 G1 X-90.079 Y-1.208 E.01507 G1 X-90.079 Y-.125 E.04211 G1 X-89.303 Y-.9 E.04263 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.953 Y20.167 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537303 G1 F15000 G1 X-90.356 Y20.57 E.02299 G1 X-90.447 Y20.579 E.00368 G1 X-90.447 Y26.256 E.2287 ;WIDTH:0.517753 G1 X-90.467 Y26.529 E.01061 ;WIDTH:0.478651 G1 X-90.486 Y26.803 E.00973 ;WIDTH:0.420847 G1 X-90.506 Y27.076 E.00844 G1 X-90.506 Y28.636 E.04804 G1 X-88.314 Y26.444 E.09546 G1 X-89.706 Y26.444 E.04286 ;WIDTH:0.43955 G1 X-89.788 Y26.395 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y26.346 E.0034 ;WIDTH:0.536698 G1 X-89.953 Y26.298 E.00385 G1 X-89.953 Y20.207 E.24507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.322 Y26.862 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.500564 G1 F15000 G1 X-89.817 Y26.851 E.0185 G1 X-90.088 Y26.577 E.01438 G1 X-90.088 Y27.628 E.03922 G1 X-89.35 Y26.89 E.03895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.82 Y49.395 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.61798 G1 F13308.283 G2 X-89.804 Y49.491 I-.036 J.056 E.01426 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13308.283 G1 X-89.82 Y49.519 G1 X-89.892 Y49.519 G1 X-89.928 Y49.457 G1 X-89.892 Y49.395 G1 X-89.82 Y49.395 ;WIPE_END G1 X-82.187 Y49.406 Z.8 F30000 G1 X-20.716 Y49.501 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.443642 G1 F15000 G2 X-20.711 Y49.579 I-.023 J.041 E.00654 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-20.766 Y49.587 G1 X-20.791 Y49.544 G1 X-20.766 Y49.501 G1 X-20.716 Y49.501 ;WIPE_END G1 X-14.76 Y49.19 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397572 G1 F15000 G2 X-14.767 Y48.547 I-4.887 J-.268 E.0186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.402 Y46.938 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537285 G1 F15000 G1 X-14.953 Y47.671 E.03462 G1 X-14.891 Y47.821 E.00656 ;WIDTH:0.517203 G1 X-14.851 Y48.05 E.00897 ;WIDTH:0.477039 G1 X-14.81 Y48.278 E.00821 ;WIDTH:0.436875 G1 X-14.77 Y48.507 E.00745 G1 X-14.79 Y48.276 E.00745 ;WIDTH:0.477039 G1 X-14.81 Y48.044 E.00821 ;WIDTH:0.533478 G1 X-14.83 Y47.813 E.00928 G1 X-14.83 Y46.365 E.05787 G1 X-15.374 Y46.909 E.03076 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.016 Y46.936 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-15.668 Y47.303 E.01556 G1 X-15.331 Y47.888 E.02075 G1 X-15.132 Y48.604 E.02282 G3 X-15.167 Y49.556 I-3.859 J.335 E.02933 G1 X-14.394 Y49.556 E.02375 G1 X-14.394 Y45.313 E.13036 G1 X-15.988 Y46.907 E.06926 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.453 Y19.744 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.542628 G1 F15000 G1 X-14.471 Y18.835 E.03702 G1 X-15.144 Y19.508 E.03874 G1 X-14.947 Y19.621 E.00922 G1 X-14.947 Y25.519 E.24019 G3 X-14.691 Y25.357 I.333 J.244 E.01262 G1 X-14.453 Y25.485 E.01102 G1 X-14.453 Y19.784 E.23212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.054 Y-24.662 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-84.117 Y-24.625 E.00204 G1 X-84.052 Y-24.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.117 Y-24.625 G1 X-84.054 Y-24.662 ;WIPE_END G1 X-76.59 Y-26.256 Z.8 F30000 G1 X.795 Y-42.79 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X.795 Y-42.355 E.01443 G1 X-6.495 Y-42.355 E.24182 G1 X-6.495 Y-49.645 E.24182 G1 X.795 Y-49.645 E.24182 G1 X.795 Y-42.83 E.22607 G1 X.36 Y-42.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-6.06 Y-42.79 E.19727 G1 X-6.06 Y-49.21 E.19727 G1 X.36 Y-49.21 E.19727 G1 X.36 Y-42.83 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.64 Y-42.818 ;WIPE_END G1 X-6.902 Y-42.052 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-7.298 Y-42.052 E.01313 G1 X-7.298 Y-49.948 E.26192 G1 X-6.902 Y-49.948 E.01313 G1 X-6.902 Y-42.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-7.298 Y-42.052 G1 X-7.298 Y-43.654 ;WIPE_END G1 X.334 Y-43.768 Z.8 F30000 G1 X1.798 Y-43.79 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X1.798 Y-49.052 E.17455 G1 X5.902 Y-49.052 E.13614 G1 X5.902 Y-42.948 E.20249 G1 X1.798 Y-42.948 E.13614 G1 X1.798 Y-43.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.205 Y-43.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.205 Y-48.645 E.16105 G1 X5.495 Y-48.645 E.10914 G1 X5.495 Y-43.355 E.17548 G1 X2.205 Y-43.355 E.10914 G1 X2.205 Y-43.75 E.0131 G1 X2.64 Y-43.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.64 Y-48.21 E.13581 G1 X5.06 Y-48.21 E.07436 G1 X5.06 Y-43.79 E.13581 G1 X2.68 Y-43.79 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.662 Y-45.79 ;WIPE_END G1 X1.202 Y-42.79 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X1.202 Y-49.948 E.23744 G1 X7.298 Y-49.948 E.20221 G1 X7.298 Y-42.052 E.26192 G1 X1.202 Y-42.052 E.20221 G1 X1.202 Y-42.75 E.02315 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X1.202 Y-44.75 ;WIPE_END G1 X7.705 Y-41.645 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-7.705 Y-41.645 E.51118 G1 X-7.705 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.51118 G1 X7.705 Y-41.685 E.2876 G1 X8.14 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.106 Y-42.5 Z.8 F30000 G1 Z.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X1.406 Y-42.5 E.18719 G1 X1.744 Y-42.256 F30000 ;WIDTH:0.373259 G1 F12000 G1 X1.683 Y-42.378 E.00368 ;WIDTH:0.349663 G1 X1.622 Y-42.5 E.00341 ;WIDTH:0.302472 G1 X1.561 Y-42.622 E.00289 ;WIDTH:0.25528 G1 X1.5 Y-42.744 E.00236 ;WIDTH:0.23217 G1 X1.5 Y-49.256 E.10041 G1 X1.561 Y-49.378 E.00211 ;WIDTH:0.302473 G1 X1.622 Y-49.5 E.00289 ;WIDTH:0.349664 G1 X1.683 Y-49.622 E.00341 ;WIDTH:0.396855 G1 X1.744 Y-49.744 E.00394 G1 X1.406 Y-49.5 F30000 ;WIDTH:0.531684 G1 F12000 G1 X6.106 Y-49.5 E.18719 G1 X6.353 Y-48.798 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537302 G1 F15000 G1 X6.353 Y-43.202 E.22541 G1 X6.455 Y-43.169 E.00431 ;WIDTH:0.520342 G1 X6.472 Y-43.103 E.00267 ;WIDTH:0.48642 G1 X6.488 Y-43.036 E.00248 ;WIDTH:0.436317 G1 X6.505 Y-42.969 E.0022 G1 X6.505 Y-42.452 E.01659 G1 X6.898 Y-42.452 E.01259 G1 X6.898 Y-42.969 E.01659 ;WIDTH:0.452498 G1 X6.881 Y-43.103 E.00448 ;WIDTH:0.48642 G1 X6.864 Y-43.236 E.00485 ;WIDTH:0.53688 G1 X6.847 Y-43.369 E.00541 G1 X6.847 Y-48.631 E.21179 ;WIDTH:0.520342 G1 X6.864 Y-48.764 E.00523 ;WIDTH:0.48642 G1 X6.881 Y-48.897 E.00485 ;WIDTH:0.436996 G1 X6.898 Y-49.031 E.00431 G1 X6.898 Y-49.548 E.01662 G1 X6.505 Y-49.548 E.01261 G1 X6.505 Y-49.031 E.01662 ;WIDTH:0.452498 G1 X6.488 Y-48.964 E.00229 ;WIDTH:0.48642 G1 X6.472 Y-48.897 E.00248 ;WIDTH:0.520124 G3 X6.391 Y-48.81 I-.068 J.018 E.00551 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.999 Y-50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-6.699 Y-50 E.19 G1 X-6.699 Y-42 F30000 G1 F12000 G1 X.999 Y-42 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.001 Y-42 ;WIPE_END G1 X5.228 Y-37.59 Z.8 F30000 G1 X77.698 Y13.71 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X77.698 Y8.448 E.17455 G1 X81.802 Y8.448 E.13614 G1 X81.802 Y14.552 E.20249 G1 X77.698 Y14.552 E.13614 G1 X77.698 Y13.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X78.105 Y13.71 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X78.105 Y8.855 E.16105 G1 X81.395 Y8.855 E.10914 G1 X81.395 Y14.145 E.17548 G1 X78.105 Y14.145 E.10914 G1 X78.105 Y13.75 E.0131 G1 X78.54 Y13.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X78.54 Y9.29 E.13581 G1 X80.96 Y9.29 E.07436 G1 X80.96 Y13.71 E.13581 G1 X78.58 Y13.71 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X78.562 Y11.71 ;WIPE_END G1 X74.198 Y15.448 Z.8 F30000 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X82.398 Y7.552 E.27519 G1 X82.398 Y15.448 E.26192 G1 X74.238 Y15.448 E.27068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.102 Y15.448 G1 X74.102 Y13.584 ;WIPE_END G1 X81.264 Y10.946 Z.8 F30000 G1 X89.66 Y7.855 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X90.095 Y7.855 E.01443 G1 X90.095 Y15.145 E.24182 G1 X82.805 Y15.145 E.24182 G1 X82.805 Y7.855 E.24182 G1 X89.62 Y7.855 E.22607 G1 X89.66 Y8.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X89.66 Y14.71 E.19727 G1 X83.24 Y14.71 E.19727 G1 X83.24 Y8.29 E.19727 G1 X89.62 Y8.29 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.502 Y8.29 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X90.502 Y7.552 E.02448 G1 X90.898 Y7.552 E.01313 G1 X90.898 Y15.448 E.26192 G1 X90.502 Y15.448 E.01313 G1 X90.502 Y8.33 E.23611 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X90.502 Y7.552 G1 X90.898 Y7.552 G1 X90.898 Y8.378 ;WIPE_END G1 X83.961 Y11.562 Z.8 F30000 G1 X74.605 Y15.855 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X91.305 Y7.145 E.58416 G1 X91.305 Y15.855 E.28893 G1 X74.645 Y15.855 E.55264 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z.8 F30000 G1 Z.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X77.494 Y15 Z.8 F30000 G1 Z.4 G1 E.8 F1800 ;WIDTH:0.531684 G1 F12000 G1 X82.194 Y15 E.18719 G1 X82.039 Y14.878 F30000 ;WIDTH:0.232166 G1 F12000 G1 X82.1 Y14.756 E.00211 G1 X82.1 Y8.244 E.10041 ;WIDTH:0.255276 G1 X82.039 Y8.122 E.00236 ;WIDTH:0.302466 G1 X81.978 Y8 E.00289 ;WIDTH:0.349657 G1 X81.917 Y7.878 E.00341 ;WIDTH:0.373252 G1 X81.856 Y7.756 E.00368 G1 X82.194 Y8 F30000 ;WIDTH:0.531684 G1 F12000 G1 X77.494 Y8 E.18719 G1 X74.446 Y7.838 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X74.383 Y7.875 E.00204 G1 X74.448 Y7.91 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y13.113 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.424713 G1 F15000 G1 X75.533 Y15.252 E.0941 G1 X74.993 Y15.252 E.0168 G1 X77.502 Y12.743 E.11039 G1 X77.502 Y12.203 E.0168 G1 X74.453 Y15.252 E.13415 G1 X74.298 Y15.252 E.00482 G1 X74.298 Y14.867 E.01198 G1 X77.502 Y11.663 E.14096 G1 X77.502 Y11.123 E.0168 G1 X74.298 Y14.327 E.14096 G1 X74.298 Y13.787 E.0168 G1 X77.502 Y10.583 E.14096 G1 X77.502 Y10.043 E.0168 G1 X74.298 Y13.247 E.14096 G1 X74.298 Y12.707 E.0168 G1 X77.502 Y9.503 E.14096 G1 X77.502 Y8.963 E.0168 G1 X74.298 Y12.167 E.14096 G1 X74.298 Y11.627 E.0168 G1 X77.463 Y8.462 E.13926 G1 X77.298 Y8.462 E.00513 G1 X77.298 Y8.087 E.01166 G1 X74.298 Y11.087 E.13201 G1 X74.298 Y10.547 E.0168 G1 X77.097 Y7.748 E.12316 G1 X76.557 Y7.748 E.0168 G1 X74.298 Y10.007 E.0994 G1 X74.298 Y9.467 E.0168 G1 X76.017 Y7.748 E.07564 G1 X75.477 Y7.748 E.0168 G1 X74.298 Y8.927 E.05189 G1 X74.298 Y8.388 E.0168 G1 X75.107 Y7.578 E.0356 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.052 Y14.363 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.62721 G1 F13098.052 G1 X77.159 Y14.269 E.00679 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.052 Y14.363 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.604705 G1 F13622.763 G1 X76.929 Y14.454 E.00701 ;WIDTH:0.559695 G1 F14809.287 G1 X76.806 Y14.545 E.00645 ;WIDTH:0.494535 G1 F15000 G1 X76.683 Y14.636 E.00563 G1 X76.299 Y15.02 E.01996 G1 X77.066 Y15.02 E.02822 ;WIDTH:0.514684 G1 X77.062 Y14.814 E.00791 ;WIDTH:0.559695 G1 F14809.287 G1 X77.057 Y14.608 E.00866 ;WIDTH:0.5822 G1 F14191.265 G1 X77.053 Y14.403 E.00904 SET_VELOCITY_LIMIT ACCEL=10000 G1 X81.856 Y15.244 F30000 ;TYPE:Gap infill ;WIDTH:0.396847 G1 F12000 G1 X81.917 Y15.122 E.00394 ;WIDTH:0.349657 G1 X81.978 Y15 E.00341 ;WIDTH:0.302467 G1 X82.039 Y14.878 E.00289 G1 X82.601 Y15.5 F30000 ;WIDTH:0.345842 G1 F12000 G1 X90.299 Y15.5 E.19 G1 X90.299 Y7.5 F30000 G1 F12000 G1 X82.601 Y7.5 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X84.601 Y7.5 ;WIPE_END G1 X79.338 Y13.027 Z.8 F30000 G1 X55.548 Y38.01 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z.8 F30000 G1 Z.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X49.645 Y-5.756 Z.8 F30000 G1 X3.102 Y40.648 Z.8 G1 Z.4 M73 P9 R98 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X35.998 Y-10.448 E1.09122 G1 X35.998 Y40.648 E1.69494 G1 X3.142 Y40.648 E1.08989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.926 Y39.765 Z.8 F30000 G1 X33.691 Y40.622 Z.8 G1 Z.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.420495 G1 F15000 G1 X35.802 Y38.511 E.09186 G1 X35.802 Y37.977 E.01643 G1 X33.327 Y40.452 E.10771 G1 X32.793 Y40.452 E.01643 G1 X35.802 Y37.443 E.13094 G1 X35.802 Y36.909 E.01643 G1 X32.259 Y40.452 E.15417 G1 X31.725 Y40.452 E.01643 G1 X35.802 Y36.375 E.17741 G1 X35.802 Y35.841 E.01643 G1 X31.191 Y40.452 E.20064 G1 X30.657 Y40.452 E.01643 G1 X35.802 Y35.307 E.22388 G1 X35.802 Y34.773 E.01643 G1 X30.123 Y40.452 E.24711 G1 X29.589 Y40.452 E.01643 G1 X35.802 Y34.239 E.27034 G1 X35.802 Y33.705 E.01643 G1 X29.055 Y40.452 E.29358 G1 X28.521 Y40.452 E.01643 G1 X35.802 Y33.171 E.31681 G1 X35.802 Y32.637 E.01643 G1 X27.987 Y40.452 E.34005 G1 X27.453 Y40.452 E.01643 G1 X35.802 Y32.103 E.36328 G1 X35.802 Y31.569 E.01643 G1 X26.919 Y40.452 E.38652 G1 X26.385 Y40.452 E.01643 G1 X35.802 Y31.035 E.40975 G1 X35.802 Y30.501 E.01643 G1 X25.851 Y40.452 E.43298 G1 X25.317 Y40.452 E.01643 G1 X35.802 Y29.967 E.45622 G1 X35.802 Y29.433 E.01643 G1 X24.783 Y40.452 E.47945 G1 X24.249 Y40.452 E.01643 G1 X35.802 Y28.899 E.50269 G1 X35.802 Y28.365 E.01643 G1 X23.715 Y40.452 E.52592 G1 X23.181 Y40.452 E.01643 G1 X35.802 Y27.831 E.54915 G1 X35.802 Y27.297 E.01643 G1 X22.647 Y40.452 E.57239 G1 X22.113 Y40.452 E.01643 G1 X35.802 Y26.763 E.59562 G1 X35.802 Y26.229 E.01643 G1 X21.579 Y40.452 E.61886 G1 X21.045 Y40.452 E.01643 G1 X35.802 Y25.695 E.64209 G1 X35.802 Y25.161 E.01643 G1 X20.511 Y40.452 E.66533 G1 X19.977 Y40.452 E.01643 G1 X35.802 Y24.627 E.68856 G1 X35.802 Y24.093 E.01643 G1 X19.443 Y40.452 E.71179 G1 X18.909 Y40.452 E.01643 G1 X35.802 Y23.559 E.73503 G1 X35.802 Y23.025 E.01643 G1 X18.375 Y40.452 E.75826 G1 X17.841 Y40.452 E.01643 G1 X35.802 Y22.491 E.7815 G1 X35.802 Y21.957 E.01643 G1 X17.307 Y40.452 E.80473 G1 X16.773 Y40.452 E.01643 G1 X35.802 Y21.423 E.82796 G1 X35.802 Y20.889 E.01643 G1 X16.239 Y40.452 E.8512 G1 X15.705 Y40.452 E.01643 G1 X35.802 Y20.356 E.87443 G1 X35.802 Y19.822 E.01643 G1 X15.172 Y40.452 E.89767 G1 X14.638 Y40.452 E.01643 G1 X35.802 Y19.288 E.9209 G1 X35.802 Y18.754 E.01643 G1 X14.104 Y40.452 E.94413 G1 X13.57 Y40.452 E.01643 G1 X35.802 Y18.22 E.96737 G1 X35.802 Y17.686 E.01643 G1 X13.036 Y40.452 E.9906 G1 X12.502 Y40.452 E.01643 G1 X35.802 Y17.152 E1.01384 G1 X35.802 Y16.618 E.01643 G1 X11.968 Y40.452 E1.03707 G1 X11.434 Y40.452 E.01643 G1 X35.802 Y16.084 E1.06031 G1 X35.802 Y15.55 E.01643 G1 X10.9 Y40.452 E1.08354 G1 X10.366 Y40.452 E.01643 G1 X35.802 Y15.016 E1.10677 G1 X35.802 Y14.482 E.01643 G1 X9.832 Y40.452 E1.13001 G1 X9.298 Y40.452 E.01643 G1 X35.802 Y13.948 E1.15324 G1 X35.802 Y13.414 E.01643 G1 X8.764 Y40.452 E1.17648 G1 X8.23 Y40.452 E.01643 G1 X35.802 Y12.88 E1.19971 G1 X35.802 Y12.346 E.01643 G1 X7.696 Y40.452 E1.22294 G1 X7.162 Y40.452 E.01643 G1 X35.802 Y11.812 E1.24618 G1 X35.802 Y11.278 E.01643 G1 X6.628 Y40.452 E1.26941 G1 X6.094 Y40.452 E.01643 G1 X35.802 Y10.744 E1.29265 G1 X35.802 Y10.21 E.01643 G1 X5.56 Y40.452 E1.31588 G1 X5.026 Y40.452 E.01643 G1 X35.802 Y9.676 E1.33912 G1 X35.802 Y9.142 E.01643 G1 X4.492 Y40.452 E1.36235 G1 X3.958 Y40.452 E.01643 G1 X35.802 Y8.608 E1.38558 G1 X35.802 Y8.074 E.01643 G1 X3.424 Y40.452 E1.40882 G1 X3.298 Y40.452 E.00388 G1 X3.298 Y40.044 E.01255 G1 X35.802 Y7.54 E1.4143 G1 X35.802 Y7.006 E.01643 G1 X3.298 Y39.51 E1.4143 G1 X3.298 Y38.976 E.01643 G1 X35.802 Y6.472 E1.4143 G1 X35.802 Y5.938 E.01643 G1 X3.298 Y38.442 E1.4143 G1 X3.298 Y37.908 E.01643 G1 X35.802 Y5.404 E1.4143 G1 X35.802 Y4.87 E.01643 G1 X3.298 Y37.374 E1.4143 G1 X3.298 Y36.84 E.01643 G1 X35.802 Y4.336 E1.4143 G1 X35.802 Y3.802 E.01643 G1 X3.298 Y36.306 E1.4143 G1 X3.298 Y35.772 E.01643 G1 X35.802 Y3.268 E1.4143 G1 X35.802 Y2.734 E.01643 G1 X3.298 Y35.238 E1.4143 G1 X3.298 Y34.704 E.01643 G1 X35.802 Y2.2 E1.4143 G1 X35.802 Y1.666 E.01643 G1 X3.298 Y34.17 E1.4143 G1 X3.298 Y33.636 E.01643 G1 X35.802 Y1.133 E1.4143 G1 X35.802 Y.599 E.01643 G1 X3.298 Y33.102 E1.4143 G1 X3.298 Y32.568 E.01643 G1 X35.802 Y.065 E1.4143 G1 X35.802 Y-.469 E.01643 M73 P10 R98 G1 X3.298 Y32.034 E1.4143 G1 X3.298 Y31.5 E.01643 G1 X35.802 Y-1.003 E1.4143 G1 X35.802 Y-1.537 E.01643 G1 X3.298 Y30.966 E1.4143 G1 X3.298 Y30.432 E.01643 G1 X35.802 Y-2.071 E1.4143 G1 X35.802 Y-2.605 E.01643 G1 X3.298 Y29.898 E1.4143 G1 X3.298 Y29.365 E.01643 G1 X35.802 Y-3.139 E1.4143 G1 X35.802 Y-3.673 E.01643 G1 X3.298 Y28.831 E1.4143 G1 X3.298 Y28.297 E.01643 G1 X35.802 Y-4.207 E1.4143 G1 X35.802 Y-4.741 E.01643 G1 X3.298 Y27.763 E1.4143 G1 X3.298 Y27.229 E.01643 G1 X35.802 Y-5.275 E1.4143 G1 X35.802 Y-5.809 E.01643 G1 X3.298 Y26.695 E1.4143 G1 X3.298 Y26.161 E.01643 G1 X35.802 Y-6.343 E1.4143 G1 X35.802 Y-6.877 E.01643 G1 X3.298 Y25.627 E1.4143 G1 X3.298 Y25.093 E.01643 G1 X35.802 Y-7.411 E1.4143 G1 X35.802 Y-7.945 E.01643 G1 X3.298 Y24.559 E1.4143 G1 X3.298 Y24.025 E.01643 G1 X35.802 Y-8.479 E1.4143 G1 X35.802 Y-9.013 E.01643 G1 X3.298 Y23.491 E1.4143 G1 X3.298 Y22.957 E.01643 G1 X35.802 Y-9.547 E1.4143 G1 X35.802 Y-10.081 E.01643 G1 X3.298 Y22.423 E1.4143 G1 X3.298 Y21.889 E.01643 G1 X35.439 Y-10.252 E1.39851 G1 X34.905 Y-10.252 E.01643 G1 X3.298 Y21.355 E1.37527 G1 X3.298 Y20.821 E.01643 G1 X34.371 Y-10.252 E1.35204 G1 X33.837 Y-10.252 E.01643 G1 X3.298 Y20.287 E1.32881 G1 X3.298 Y19.753 E.01643 G1 X33.303 Y-10.252 E1.30557 G1 X32.769 Y-10.252 E.01643 G1 X3.298 Y19.219 E1.28234 G1 X3.298 Y18.685 E.01643 G1 X32.235 Y-10.252 E1.2591 G1 X31.701 Y-10.252 E.01643 G1 X3.298 Y18.151 E1.23587 G1 X3.298 Y17.617 E.01643 G1 X31.167 Y-10.252 E1.21263 G1 X30.633 Y-10.252 E.01643 G1 X3.298 Y17.083 E1.1894 G1 X3.298 Y16.549 E.01643 G1 X30.099 Y-10.252 E1.16617 G1 X29.565 Y-10.252 E.01643 G1 X3.298 Y16.015 E1.14293 G1 X3.298 Y15.481 E.01643 G1 X29.031 Y-10.252 E1.1197 G1 X28.497 Y-10.252 E.01643 G1 X3.298 Y14.947 E1.09646 G1 X3.298 Y14.413 E.01643 G1 X27.963 Y-10.252 E1.07323 G1 X27.429 Y-10.252 E.01643 G1 X3.298 Y13.879 E1.05 G1 X3.298 Y13.345 E.01643 G1 X26.895 Y-10.252 E1.02676 G1 X26.361 Y-10.252 E.01643 G1 X3.298 Y12.811 E1.00353 G1 X3.298 Y12.277 E.01643 G1 X25.827 Y-10.252 E.98029 G1 X25.293 Y-10.252 E.01643 G1 X3.298 Y11.743 E.95706 G1 X3.298 Y11.209 E.01643 G1 X24.759 Y-10.252 E.93383 G1 X24.226 Y-10.252 E.01643 G1 X3.298 Y10.676 E.91059 G1 X3.298 Y10.142 E.01643 G1 X23.692 Y-10.252 E.88736 G1 X23.158 Y-10.252 E.01643 G1 X3.298 Y9.608 E.86412 G1 X3.298 Y9.074 E.01643 G1 X22.624 Y-10.252 E.84089 G1 X22.09 Y-10.252 E.01643 G1 X3.298 Y8.54 E.81765 G1 X3.298 Y8.006 E.01643 G1 X21.556 Y-10.252 E.79442 G1 X21.022 Y-10.252 E.01643 G1 X3.298 Y7.472 E.77119 G1 X3.298 Y6.938 E.01643 G1 X20.488 Y-10.252 E.74795 G1 X19.954 Y-10.252 E.01643 G1 X3.298 Y6.404 E.72472 G1 X3.298 Y5.87 E.01643 G1 X19.42 Y-10.252 E.70148 G1 X18.886 Y-10.252 E.01643 G1 X3.298 Y5.336 E.67825 G1 X3.298 Y4.802 E.01643 G1 X18.352 Y-10.252 E.65502 G1 X17.818 Y-10.252 E.01643 G1 X3.298 Y4.268 E.63178 G1 X3.298 Y3.734 E.01643 G1 X17.284 Y-10.252 E.60855 G1 X16.75 Y-10.252 E.01643 G1 X3.298 Y3.2 E.58531 G1 X3.298 Y2.666 E.01643 G1 X16.216 Y-10.252 E.56208 G1 X15.682 Y-10.252 E.01643 G1 X3.298 Y2.132 E.53884 G1 X3.298 Y1.598 E.01643 G1 X15.148 Y-10.252 E.51561 G1 X14.614 Y-10.252 E.01643 G1 X3.298 Y1.064 E.49238 G1 X3.298 Y.53 E.01643 G1 X14.08 Y-10.252 E.46914 G1 X13.546 Y-10.252 E.01643 G1 X3.298 Y-.004 E.44591 G1 X3.298 Y-.538 E.01643 G1 X13.012 Y-10.252 E.42267 G1 X12.478 Y-10.252 E.01643 G1 X3.298 Y-1.072 E.39944 G1 X3.298 Y-1.606 E.01643 G1 X11.944 Y-10.252 E.37621 G1 X11.41 Y-10.252 E.01643 G1 X3.298 Y-2.14 E.35297 G1 X3.298 Y-2.674 E.01643 G1 X10.876 Y-10.252 E.32974 G1 X10.342 Y-10.252 E.01643 G1 X3.298 Y-3.208 E.3065 G1 X3.298 Y-3.742 E.01643 G1 X9.808 Y-10.252 E.28327 G1 X9.274 Y-10.252 E.01643 G1 X3.298 Y-4.276 E.26004 G1 X3.298 Y-4.81 E.01643 G1 X8.74 Y-10.252 E.2368 G1 X8.206 Y-10.252 E.01643 G1 X3.298 Y-5.344 E.21357 G1 X3.298 Y-5.878 E.01643 G1 X7.672 Y-10.252 E.19033 G1 X7.138 Y-10.252 E.01643 G1 X3.298 Y-6.412 E.1671 G1 X3.298 Y-6.946 E.01643 G1 X6.604 Y-10.252 E.14386 G1 X6.07 Y-10.252 E.01643 G1 X3.298 Y-7.48 E.12063 G1 X3.298 Y-8.014 E.01643 G1 X5.537 Y-10.252 E.0974 G1 X5.003 Y-10.252 E.01643 G1 X3.298 Y-8.547 E.07416 G1 X3.298 Y-9.081 E.01643 G1 X4.469 Y-10.252 E.05093 G1 X3.935 Y-10.252 E.01643 G1 X3.128 Y-9.446 E.03508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-10.162 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X3.383 Y-10.125 E.00204 G1 X3.448 Y-10.09 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.544 Y39.337 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.544538 G1 F15000 G1 X34.687 Y40.194 E.0495 G1 X35.544 Y40.194 E.035 G1 X35.544 Y39.377 E.03337 ;LAYER_CHANGE ;Z:0.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X35.544 Y40.194 G1 X34.687 Y40.194 G1 X34.919 Y39.962 ;WIPE_END ;AFTER_LAYER_CHANGE ;0.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1 I.159 J-1.207 P1 F30000 G1 X-31.398 Y31.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-41.715 Y29.63 Z1 F30000 G1 X-88.66 Y19.948 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-87.203 Y13.189 Z1 F30000 G1 X-88.66 Y-7.252 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y-7.252 E.1248 G1 X-84.898 Y-1.748 E.18258 G1 X-89.502 Y-1.748 E.15273 G1 X-89.502 Y-7.252 E.18258 G1 X-88.7 Y-7.252 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y-6.845 E.11129 G1 X-85.305 Y-2.155 E.15558 G1 X-89.095 Y-2.155 E.12572 G1 X-89.095 Y-6.845 E.15558 G1 X-88.7 Y-6.845 E.0131 G1 X-88.66 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-79.028 Y-6.49 Z1 F30000 G1 X-16.24 Y-7.252 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.398 Y-7.252 E.02793 G1 X-15.398 Y-1.748 E.18258 G1 X-20.002 Y-1.748 E.15273 G1 X-20.002 Y-7.252 E.18258 G1 X-16.28 Y-7.252 E.12347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.24 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.805 Y-6.845 E.01443 G1 X-15.805 Y-2.155 E.15558 G1 X-19.595 Y-2.155 E.12572 G1 X-19.595 Y-6.845 E.15558 G1 X-16.28 Y-6.845 E.10996 G1 X-16.24 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-17.216 Y3.162 Z1 F30000 G1 X-20.002 Y25.21 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-18.771 Y15.586 Z1 F30000 G1 X-17.443 Y-11.948 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-14.002 Y-8.507 I1.494 J1.947 E.27711 G1 X-14.002 Y49.948 E1.93905 G1 X-15.685 Y49.948 E.05584 G2 X-20.215 Y49.948 I-2.265 J-.945 E.32007 G1 X-84.685 Y49.948 E2.13862 G2 X-89.215 Y49.948 I-2.265 J-.944 E.31993 G1 X-90.898 Y49.948 E.05584 G1 X-90.898 Y-8.507 E1.93905 G2 X-87.457 Y-11.948 I1.947 J-1.494 E.27712 G1 X-84.398 Y-11.948 E.10147 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-17.483 Y-11.948 E.10014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.685 Y-11.735 G1 X-17.897 Y-11.494 G1 X-18.076 Y-11.227 G1 X-18.218 Y-10.939 G1 X-18.321 Y-10.635 G1 X-18.383 Y-10.32 G1 X-18.39 Y-10.219 ;WIPE_END G1 X-15.447 Y-11.982 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.422 Y-11.97 E.00092 G3 X-16.973 Y-11.772 I-.537 J1.972 E.3728 G3 X-16.062 Y-12.039 I1 J1.724 E.03179 G3 X-15.684 Y-12.023 I.104 J2.041 E.01259 G1 X-15.487 Y-11.989 E.00664 G1 X-15.535 Y-11.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-16.566 Y-11.488 I-.425 J1.551 E.27824 G3 X-16.034 Y-11.605 I.632 J1.604 E.01682 G3 X-15.574 Y-11.56 I.074 J1.607 E.01427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.334 Y-11.488 G1 X-15.145 Y-11.395 G1 X-14.97 Y-11.278 G1 X-14.811 Y-11.139 G1 X-14.672 Y-10.98 G1 X-14.555 Y-10.805 G1 X-14.462 Y-10.616 G1 X-14.394 Y-10.417 G1 X-14.353 Y-10.21 G1 X-14.349 Y-10.146 ;WIPE_END G1 X-14.457 Y-11.948 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-14.002 Y-11.948 E.01508 G1 X-14.002 Y-11.493 E.01508 G2 X-14.425 Y-11.923 I-1.955 J1.5 E.02007 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-14.002 Y-11.948 G1 X-14.002 Y-11.493 G1 X-14.215 Y-11.735 G1 X-14.425 Y-11.923 ;WIPE_END G1 X-22.049 Y-11.549 Z1 F30000 G1 X-89.949 Y-8.216 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-89.975 Y-8.224 E.00092 G3 X-89.973 Y-11.772 I1.016 J-1.773 E.14252 G3 X-89.062 Y-12.039 I1 J1.724 E.03179 G3 X-89.734 Y-8.106 I.104 J2.041 E.24283 G1 X-89.913 Y-8.198 E.00666 G1 X-89.757 Y-8.601 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-89.566 Y-11.488 I.798 J-1.397 E.11051 G3 X-89.034 Y-11.605 I.632 J1.604 E.01682 G3 X-89.723 Y-8.582 I.074 J1.607 E.18199 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-89.93 Y-8.722 G1 X-90.089 Y-8.861 G1 X-90.228 Y-9.02 G1 X-90.345 Y-9.195 G1 X-90.438 Y-9.384 G1 X-90.506 Y-9.583 G1 X-90.547 Y-9.79 G1 X-90.56 Y-10 G1 X-90.547 Y-10.21 G1 X-90.534 Y-10.273 ;WIPE_END G1 X-90.898 Y-11.493 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-90.898 Y-11.948 E.01508 G1 X-90.443 Y-11.948 E.01508 G1 X-90.685 Y-11.735 E.01069 G1 X-90.872 Y-11.523 E.00936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-90.898 Y-11.948 G1 X-90.443 Y-11.948 G1 X-90.685 Y-11.735 G1 X-90.872 Y-11.523 ;WIPE_END G1 X-83.24 Y-11.66 Z1 F30000 G1 X-20.095 Y-12.79 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-20.095 Y-12.355 E.01443 G1 X-13.595 Y-12.355 E.21562 G1 X-13.595 Y50.355 E2.08021 G1 X-16.399 Y50.355 E.09303 G2 X-16.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-19.722 Y50.023 I-1.444 J1.451 E.19522 G1 X-19.501 Y50.355 E.01324 G1 X-85.399 Y50.355 E2.18599 G2 X-85.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-88.722 Y50.023 I-1.444 J1.451 E.19521 G1 X-88.501 Y50.355 E.01324 G1 X-91.305 Y50.355 E.09303 G1 X-91.305 Y-12.355 E2.08021 G1 X-84.805 Y-12.355 E.21562 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.83 E.41548 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-20.095 Y-12.355 G1 X-18.57 Y-12.355 ;WIPE_END G1 X-18.665 Y-4.723 Z1 F30000 G1 X-19.342 Y49.81 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.351 Y49.809 E.00029 G3 X-18.566 Y47.512 I1.391 J-.807 E.0845 G3 X-18.034 Y47.395 I.632 J1.604 E.01682 G3 X-19.233 Y49.985 I.074 J1.607 E.20272 G1 X-19.32 Y49.844 E.00509 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.351 Y49.809 G1 X-19.438 Y49.616 G1 X-19.506 Y49.417 G1 X-19.547 Y49.21 G1 X-19.56 Y49 G1 X-19.547 Y48.79 G1 X-19.506 Y48.583 G1 X-19.438 Y48.384 G1 X-19.345 Y48.195 G1 X-19.228 Y48.02 G1 X-19.19 Y47.977 ;WIPE_END G1 X-26.82 Y48.18 Z1 F30000 G1 X-88.333 Y49.823 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-88.351 Y49.809 E.00072 G3 X-87.566 Y47.512 I1.391 J-.807 E.0845 G3 X-87.034 Y47.395 I.632 J1.604 E.01682 G3 X-88.233 Y49.985 I.074 J1.607 E.20272 G1 X-88.312 Y49.857 E.00459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-88.351 Y49.809 G1 X-88.438 Y49.616 G1 X-88.506 Y49.417 G1 X-88.547 Y49.21 G1 X-88.56 Y49 G1 X-88.547 Y48.79 G1 X-88.506 Y48.583 G1 X-88.438 Y48.384 G1 X-88.345 Y48.195 G1 X-88.228 Y48.02 G1 X-88.201 Y47.989 ;WIPE_END G1 X-82.49 Y42.925 Z1 F30000 G1 X-19.66 Y-12.79 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-91.74 Y50.79 E2.41454 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-19.079 Y-11.56 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.412076 G1 F15000 G1 X-18.569 Y-11.05 E.02168 G1 X-18.401 Y-11.438 E.01272 G1 X-18.312 Y-11.56 E.00453 G1 X-19.039 Y-11.56 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-18.312 Y-11.56 G1 X-18.401 Y-11.438 G1 X-18.569 Y-11.05 G1 X-19.064 Y-11.545 ;WIPE_END G1 X-16.322 Y-4.422 Z1 F30000 G1 X-15.128 Y-1.321 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.541611 G1 F15000 G1 X-14.468 Y-.661 E.03793 G2 X-14.453 Y-7.487 I-378.278 J-4.281 E.2774 G1 X-14.947 Y-7.291 E.02161 G1 X-14.947 Y-1.544 E.23354 G1 X-14.963 Y-1.42 E.0051 G1 X-15.094 Y-1.341 E.00621 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.963 Y-1.42 G1 X-14.947 Y-1.544 G1 X-14.947 Y-3.266 ;WIPE_END G1 X-17.981 Y-8.181 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G2 X-17.345 Y-7.614 I2.617 J-2.293 E.02366 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-17.617 Y-7.822 G1 X-17.981 Y-8.181 ;WIPE_END G1 X-19.42 Y-15.676 Z1 F30000 G1 X-20.953 Y-23.654 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.536905 G1 F15000 G1 X-20.953 Y-24.497 E.03395 G1 X-21.796 Y-24.497 E.03395 G1 X-20.981 Y-23.682 E.0464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.693 Y-8.008 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.428124 G1 F12000 G1 X-41.122 Y-9.437 E.06343 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.925 Y-9.696 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.434 Y-7.205 E.11058 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.388 Y-6.615 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.515 Y-9.742 E.13881 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.008 Y-9.689 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.441 Y-6.122 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.554 Y-5.691 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.439 Y-9.576 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.823 Y-9.415 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.715 Y-5.307 E.18238 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.916 Y-4.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.167 Y-9.214 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.474 Y-8.976 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.154 Y-4.656 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.426 Y-4.384 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.746 Y-8.704 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.984 Y-8.397 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.733 Y-4.146 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.077 Y-3.945 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.185 Y-8.053 E.18237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.346 Y-7.669 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.461 Y-3.784 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.892 Y-3.671 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.459 Y-7.238 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.512 Y-6.745 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.385 Y-3.618 E.1388 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.975 Y-3.664 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.466 Y-6.155 E.11057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.207 Y-5.351 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.779 Y-3.923 E.06341 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.693 Y-8.008 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.122 Y-9.437 E.06343 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.925 Y-9.696 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-59.434 Y-7.205 E.11058 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.388 Y-6.615 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.515 Y-9.742 E.13881 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-63.008 Y-9.689 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-59.441 Y-6.122 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.554 Y-5.691 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.439 Y-9.576 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-63.823 Y-9.415 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-59.715 Y-5.307 E.18238 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.916 Y-4.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-64.167 Y-9.214 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.474 Y-8.976 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.154 Y-4.656 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.426 Y-4.384 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-64.746 Y-8.704 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.984 Y-8.397 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.733 Y-4.146 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.077 Y-3.945 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-65.185 Y-8.053 E.18237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-65.346 Y-7.669 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.461 Y-3.784 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.892 Y-3.671 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-65.459 Y-7.238 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-65.512 Y-6.745 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.385 Y-3.618 E.1388 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.975 Y-3.664 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-65.466 Y-6.155 E.11057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-65.207 Y-5.351 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.779 Y-3.923 E.06341 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.953 Y-1.999 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537303 G1 F15000 G1 X-89.953 Y-7.291 E.21322 G1 X-90.425 Y-7.498 E.02077 G1 X-90.447 Y-7.487 E.001 G1 X-90.447 Y-2.385 E.20554 G1 X-90.325 Y-2.37 E.00498 G1 X-89.981 Y-2.027 E.01957 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-90.325 Y-2.37 G1 X-90.447 Y-2.385 G1 X-90.447 Y-3.776 ;WIPE_END G1 X-87.526 Y-7.625 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-87.589 Y-7.588 E.00204 G1 X-87.524 Y-7.553 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-87.589 Y-7.588 G1 X-87.526 Y-7.625 ;WIPE_END G1 X-87.718 Y.005 Z1 F30000 G1 X-88.212 Y19.556 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-90.506 Y17.262 E.09967 G1 X-90.506 Y18.891 E.05003 ;WIDTH:0.43955 G1 X-90.486 Y19.175 E.00922 ;WIDTH:0.478651 G1 X-90.467 Y19.46 E.01013 ;WIDTH:0.53686 G1 X-90.447 Y19.744 E.01148 G1 X-90.447 Y25.405 E.22784 G1 X-90.315 Y25.385 E.00539 G1 X-89.953 Y25.731 E.02015 G1 X-89.953 Y19.744 E.24098 ;WIDTH:0.517753 G1 X-89.87 Y19.682 E.00401 ;WIDTH:0.478651 G1 X-89.788 Y19.619 E.00368 ;WIDTH:0.422602 G1 X-89.706 Y19.556 E.00321 G1 X-88.252 Y19.556 E.04497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.254 Y19.124 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.528852 G1 F15000 G1 X-90.074 Y18.304 E.04594 G1 X-90.074 Y19.453 E.04551 G1 X-89.796 Y19.131 E.01687 G1 X-89.294 Y19.125 E.01988 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.141 Y49.191 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.414033 G1 F15000 G1 X-90.123 Y48.733 E.01387 ;WIDTH:0.432843 G1 X-90.105 Y48.275 E.01457 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.256 Y46.251 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.432618 G1 F15000 G1 X-89.745 Y45.762 E.02198 G1 X-89.745 Y46.755 E.03153 G1 X-89.407 Y46.367 E.01632 G1 X-89.288 Y46.275 E.00479 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.676 Y46.289 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.421997 G1 F15000 G1 X-90.129 Y44.836 E.06348 G2 X-90.114 Y48.078 I73.79 J1.274 E.10015 ;WIDTH:0.447619 G1 X-90.104 Y48.235 E.00519 G1 X-89.775 Y47.454 E.02793 ;WIDTH:0.419999 G1 X-89.278 Y46.776 E.02583 G1 X-88.707 Y46.314 E.02258 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.04 Y46.392 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.506 Y43.926 E.10716 G1 X-90.506 Y49.556 E.173 G1 X-89.725 Y49.556 E.02398 G1 X-89.795 Y49.025 E.01646 G1 X-89.705 Y48.287 E.02282 G1 X-89.426 Y47.599 E.02282 G1 X-88.979 Y47.006 E.02282 G1 X-88.394 Y46.548 E.02282 G1 X-88.076 Y46.408 E.01067 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-88.394 Y46.548 G1 X-88.979 Y47.006 G1 X-89.426 Y47.599 G1 X-89.489 Y47.754 ;WIPE_END G1 X-84.207 Y49.567 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-84.27 Y49.603 E.00204 G1 X-84.205 Y49.638 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.27 Y49.603 G1 X-84.207 Y49.567 ;WIPE_END G1 X-77.44 Y46.035 Z1 F30000 G1 X-69.693 Y41.992 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.428124 G1 F12000 G1 X-71.122 Y40.563 E.06343 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-71.925 Y40.304 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-69.434 Y42.795 E.11058 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-69.388 Y43.385 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-72.515 Y40.258 E.13881 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.008 Y40.311 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-69.441 Y43.878 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-69.554 Y44.309 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.439 Y40.424 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.823 Y40.585 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-69.715 Y44.693 E.18238 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-69.916 Y45.037 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-74.167 Y40.786 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.474 Y41.024 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.154 Y45.344 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.426 Y45.616 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-74.746 Y41.296 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.984 Y41.603 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.733 Y45.854 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-71.077 Y46.055 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-75.185 Y41.947 E.18237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-75.346 Y42.331 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-71.461 Y46.216 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-71.892 Y46.329 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-75.459 Y42.762 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-75.512 Y43.255 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-72.385 Y46.382 E.1388 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.975 Y46.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-75.466 Y43.845 E.11057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-75.207 Y44.649 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.779 Y46.077 E.06341 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-75.193 Y44.663 ;WIPE_END G1 X-67.574 Y44.216 Z1 F30000 G1 X-29.693 Y41.992 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.122 Y40.563 E.06343 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.925 Y40.304 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.434 Y42.795 E.11058 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.388 Y43.385 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.515 Y40.258 E.13881 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.008 Y40.311 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.441 Y43.878 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.554 Y44.309 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.439 Y40.424 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.823 Y40.585 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.715 Y44.693 E.18238 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.916 Y45.037 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.167 Y40.786 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.474 Y41.024 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.154 Y45.344 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.426 Y45.616 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.746 Y41.296 E.19175 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.984 Y41.603 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.733 Y45.854 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.077 Y46.055 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.185 Y41.947 E.18237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.346 Y42.331 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.461 Y46.216 E.17248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.892 Y46.329 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.459 Y42.762 E.15836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.512 Y43.255 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.385 Y46.382 E.1388 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.975 Y46.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.466 Y43.845 E.11057 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.207 Y44.649 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.779 Y46.077 E.06341 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-35.193 Y44.663 ;WIPE_END G1 X-27.78 Y46.478 Z1 F30000 G1 X-14.65 Y49.694 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-14.334 Y49.66 E.00882 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.275 Y49.624 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-15.339 Y49.661 E.00204 G1 X-15.274 Y49.696 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y28.663 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420293 G1 F15000 G1 X-16.443 Y26.248 E.105 G1 X-16.977 Y26.248 E.01641 G1 X-14.198 Y29.027 E.12083 G1 X-14.198 Y29.56 E.01641 G1 X-17.51 Y26.248 E.14404 G1 X-18.044 Y26.248 E.01641 G1 X-14.198 Y30.094 E.16725 G1 X-14.198 Y30.628 E.01641 G1 X-18.578 Y26.248 E.19046 G1 X-19.111 Y26.248 E.01641 G1 X-14.198 Y31.161 E.21367 G1 X-14.198 Y31.695 E.01641 G1 X-19.815 Y26.078 E.24426 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-18.4 Y27.493 ;WIPE_END G1 X-17.186 Y19.958 Z1 F30000 G1 X-14.028 Y.377 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-15.958 Y-1.552 E.08389 G1 X-16.491 Y-1.552 E.01641 G1 X-14.198 Y.741 E.09972 G1 X-14.198 Y1.275 E.01641 G1 X-17.025 Y-1.552 E.12293 G1 X-17.559 Y-1.552 E.01641 G1 X-14.198 Y1.809 E.14614 G1 X-14.198 Y2.342 E.01641 G1 X-18.092 Y-1.552 E.16935 G1 X-18.626 Y-1.552 E.01641 G1 X-14.198 Y2.876 E.19256 G1 X-14.198 Y3.41 E.01641 G1 X-19.329 Y-1.722 E.22315 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-22.667 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-22.613 Y-24.752 E.09067 G1 X-23.147 Y-24.752 E.01641 G1 X-20.698 Y-22.303 E.1065 G1 X-20.698 Y-21.769 E.01641 G1 X-23.681 Y-24.752 E.12971 G1 X-24.214 Y-24.752 E.01641 G1 X-20.698 Y-21.236 E.15292 G1 X-20.698 Y-20.702 E.01641 G1 X-24.748 Y-24.752 E.17612 G1 X-25.282 Y-24.752 E.01641 G1 X-20.698 Y-20.168 E.19933 G1 X-20.698 Y-19.635 E.01641 G1 X-25.815 Y-24.752 E.22254 G1 X-26.349 Y-24.752 E.01641 G1 X-20.698 Y-19.101 E.24575 G1 X-20.698 Y-18.567 E.01641 G1 X-26.883 Y-24.752 E.26896 G1 X-27.416 Y-24.752 E.01641 G1 X-20.698 Y-18.034 E.29217 G1 X-20.698 Y-17.5 E.01641 G1 X-27.95 Y-24.752 E.31538 G1 X-28.484 Y-24.752 E.01641 G1 X-20.698 Y-16.966 E.33859 G1 X-20.698 Y-16.432 E.01641 G1 X-29.017 Y-24.752 E.3618 G1 X-29.551 Y-24.752 E.01641 G1 X-20.698 Y-15.899 E.38501 G1 X-20.698 Y-15.365 E.01641 G1 X-30.085 Y-24.752 E.40822 G1 X-30.619 Y-24.752 E.01641 G1 X-20.698 Y-14.831 E.43143 G1 X-20.698 Y-14.298 E.01641 G1 X-31.152 Y-24.752 E.45464 G1 X-31.686 Y-24.752 E.01641 G1 X-20.698 Y-13.764 E.47785 G1 X-20.698 Y-13.23 E.01641 G1 X-32.22 Y-24.752 E.50106 G1 X-32.753 Y-24.752 E.01641 G1 X-20.528 Y-12.527 E.53164 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.923 Y-11.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-18.54 Y-10.538 E.06015 G2 X-18.597 Y-10.062 I1.782 J.455 E.01481 G1 X-20.287 Y-11.752 E.07351 G1 X-20.698 Y-11.752 E.01264 G1 X-20.698 Y-12.163 E.01264 G1 X-33.287 Y-24.752 E.54747 G1 X-33.821 Y-24.752 E.01641 G1 X-18.542 Y-9.473 E.66444 G2 X-18.182 Y-8.58 I2.141 J-.343 E.02987 G1 X-34.354 Y-24.752 E.7033 G1 X-34.888 Y-24.752 E.01641 G1 X-17.602 Y-7.466 E.75176 G1 X-18.135 Y-7.466 E.01641 G1 X-35.422 Y-24.752 E.75176 G1 X-35.955 Y-24.752 E.01641 G1 X-18.669 Y-7.466 E.75176 G1 X-19.203 Y-7.466 E.01641 G1 X-36.489 Y-24.752 E.75176 G1 X-37.023 Y-24.752 E.01641 G1 X-19.72 Y-7.449 E.75248 G1 X-20.198 Y-7.448 E.01471 G1 X-20.198 Y-7.394 E.00168 G1 X-37.556 Y-24.752 E.75489 G1 X-38.09 Y-24.752 E.01641 G1 X-20.198 Y-6.86 E.7781 G1 X-20.198 Y-6.326 E.01641 G1 X-38.624 Y-24.752 E.80131 G1 X-39.158 Y-24.752 E.01641 M73 P10 R97 G1 X-20.198 Y-5.792 E.82452 G1 X-20.198 Y-5.259 E.01641 G1 X-39.691 Y-24.752 E.84773 G1 X-40.225 Y-24.752 E.01641 G1 X-20.198 Y-4.725 E.87094 G1 X-20.198 Y-4.191 E.01641 G1 X-40.759 Y-24.752 E.89415 G1 X-41.292 Y-24.752 E.01641 G1 X-20.198 Y-3.658 E.91736 G1 X-20.198 Y-3.124 E.01641 G1 X-41.826 Y-24.752 E.94057 G1 X-42.36 Y-24.752 E.01641 G1 X-20.028 Y-2.421 E.97116 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y4.113 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.693 Y-1.552 E.24636 G1 X-20.198 Y-1.552 E.01552 G1 X-20.198 Y-2.057 E.01552 G1 X-42.893 Y-24.752 E.98698 G1 X-43.427 Y-24.752 E.01641 G1 X-14.198 Y4.477 E1.27113 G1 X-14.198 Y5.011 E.01641 G1 X-43.961 Y-24.752 E1.29434 G1 X-44.494 Y-24.752 E.01641 G1 X-14.198 Y5.544 E1.31754 G1 X-14.198 Y6.078 E.01641 G1 X-45.028 Y-24.752 E1.34075 G1 X-45.562 Y-24.752 E.01641 G1 X-14.198 Y6.612 E1.36396 G1 X-14.198 Y7.145 E.01641 G1 X-46.095 Y-24.752 E1.38717 G1 X-46.629 Y-24.752 E.01641 G1 X-14.198 Y7.679 E1.41038 G1 X-14.198 Y8.213 E.01641 G1 X-47.163 Y-24.752 E1.43359 G1 X-47.697 Y-24.752 E.01641 G1 X-14.198 Y8.747 E1.4568 G1 X-14.198 Y9.28 E.01641 G1 X-48.23 Y-24.752 E1.48001 G1 X-48.764 Y-24.752 E.01641 G1 X-14.198 Y9.814 E1.50322 G1 X-14.198 Y10.348 E.01641 G1 X-49.298 Y-24.752 E1.52643 G1 X-49.831 Y-24.752 E.01641 G1 X-14.198 Y10.881 E1.54964 G1 X-14.198 Y11.415 E.01641 G1 X-50.365 Y-24.752 E1.57285 G1 X-50.899 Y-24.752 E.01641 G1 X-14.198 Y11.949 E1.59606 G1 X-14.198 Y12.482 E.01641 G1 X-51.432 Y-24.752 E1.61927 G1 X-51.966 Y-24.752 E.01641 G1 X-14.198 Y13.016 E1.64247 G1 X-14.198 Y13.55 E.01641 G1 X-52.5 Y-24.752 E1.66568 G1 X-53.033 Y-24.752 E.01641 G1 X-14.198 Y14.083 E1.68889 G1 X-14.198 Y14.617 E.01641 G1 X-53.567 Y-24.752 E1.7121 G1 X-54.101 Y-24.752 E.01641 G1 X-14.198 Y15.151 E1.73531 G1 X-14.198 Y15.684 E.01641 G1 X-54.634 Y-24.752 E1.75852 G1 X-55.168 Y-24.752 E.01641 G1 X-14.198 Y16.218 E1.78173 G1 X-14.198 Y16.752 E.01641 G1 X-55.702 Y-24.752 E1.80494 G1 X-56.235 Y-24.752 E.01641 G1 X-41.175 Y-9.691 E.65497 G1 X-40.836 Y-9.524 E.01163 G1 X-40.572 Y-9.355 E.00963 G1 X-40.139 Y-8.994 E.01733 G1 X-39.777 Y-8.561 E.01735 G1 X-39.606 Y-8.295 E.00973 G1 X-39.439 Y-7.955 E.01164 G1 X-14.198 Y17.285 E1.09769 G1 X-14.198 Y17.366 E.00247 G1 X-14.216 Y17.383 E.00076 G1 X-14.216 Y17.802 E.01287 G1 X-39.223 Y-7.206 E1.08755 G1 X-39.181 Y-6.63 E.01778 G1 X-14.216 Y18.335 E1.08569 G1 X-14.216 Y18.869 E.01641 G1 X-39.226 Y-6.141 E1.08765 G1 X-39.328 Y-5.71 E.01362 G1 X-14.216 Y19.403 E1.09212 G1 X-14.216 Y19.936 E.01641 G1 X-39.476 Y-5.324 E1.09852 G1 X-39.66 Y-4.975 E.01214 G1 X-14.542 Y20.143 E1.09236 G1 X-14.581 Y20.182 E.00169 G1 X-15.225 Y19.539 E.02799 G1 X-15.421 Y19.734 E.00851 G1 X-15.485 Y19.734 E.00198 G1 X-39.879 Y-4.66 E1.06086 G1 X-40.129 Y-4.376 E.01163 G1 X-16.019 Y19.734 E1.04853 G1 X-16.552 Y19.734 E.01641 G1 X-40.411 Y-4.124 E1.03757 G1 X-40.724 Y-3.904 E.01178 G1 X-17.086 Y19.734 E1.02798 G1 X-17.62 Y19.734 E.01641 G1 X-41.071 Y-3.717 E1.01985 G1 X-41.455 Y-3.567 E.01267 G1 X-18.153 Y19.734 E1.01334 G1 X-18.687 Y19.734 E.01641 G1 X-41.883 Y-3.461 E1.00874 G1 X-42.367 Y-3.412 E.01497 G1 X-19.221 Y19.734 E1.00659 G1 X-19.64 Y19.734 E.01289 G3 X-19.737 Y19.752 I-.09 J-.221 E.00305 G1 X-31.202 Y8.287 E.49859 G1 X-31.202 Y8.821 E.01641 G1 X-20.198 Y19.824 E.47854 G1 X-20.198 Y20.358 E.01641 G1 X-31.202 Y9.354 E.47854 G1 X-31.202 Y9.888 E.01641 G1 X-20.198 Y20.892 E.47854 G1 X-20.198 Y21.426 E.01641 G1 X-31.202 Y10.422 E.47854 G1 X-31.202 Y10.955 E.01641 G1 X-20.198 Y21.959 E.47854 G1 X-20.198 Y22.493 E.01641 G1 X-31.202 Y11.489 E.47854 G1 X-31.202 Y12.023 E.01641 G1 X-20.198 Y23.027 E.47854 G1 X-20.198 Y23.56 E.01641 G1 X-31.202 Y12.556 E.47854 G1 X-31.202 Y13.09 E.01641 G1 X-20.198 Y24.094 E.47854 G1 X-20.198 Y24.628 E.01641 G1 X-31.202 Y13.624 E.47854 G1 X-31.202 Y14.158 E.01641 G1 X-20.198 Y25.161 E.47854 G1 X-20.198 Y25.695 E.01641 G1 X-31.202 Y14.691 E.47854 G1 X-31.202 Y15.225 E.01641 G1 X-14.198 Y32.229 E.73947 G1 X-14.198 Y32.762 E.01641 G1 X-31.202 Y15.759 E.73947 G1 X-31.202 Y16.292 E.01641 G1 X-14.198 Y33.296 E.73947 G1 X-14.198 Y33.83 E.01641 G1 X-31.202 Y16.826 E.73947 G1 X-31.202 Y17.36 E.01641 G1 X-14.198 Y34.363 E.73947 G1 X-14.198 Y34.897 E.01641 G1 X-31.202 Y17.893 E.73947 G1 X-31.202 Y18.427 E.01641 G1 X-14.198 Y35.431 E.73947 G1 X-14.198 Y35.965 E.01641 G1 X-31.202 Y18.961 E.73947 G1 X-31.202 Y19.494 E.01641 G1 X-14.198 Y36.498 E.73947 G1 X-14.198 Y37.032 E.01641 G1 X-31.202 Y20.028 E.73947 G1 X-31.202 Y20.562 E.01641 G1 X-14.198 Y37.566 E.73947 G1 X-14.198 Y38.099 E.01641 G1 X-31.202 Y21.095 E.73947 G1 X-31.202 Y21.629 E.01641 G1 X-14.198 Y38.633 E.73947 G1 X-14.198 Y39.167 E.01641 G1 X-31.202 Y22.163 E.73947 G1 X-31.202 Y22.697 E.01641 G1 X-14.198 Y39.7 E.73947 G1 X-14.198 Y40.234 E.01641 G1 X-31.202 Y23.23 E.73947 G1 X-31.202 Y23.764 E.01641 G1 X-14.198 Y40.768 E.73947 G1 X-14.198 Y41.301 E.01641 G1 X-31.202 Y24.298 E.73947 G1 X-31.202 Y24.831 E.01641 G1 X-14.198 Y41.835 E.73947 G1 X-14.198 Y42.369 E.01641 G1 X-31.202 Y25.365 E.73947 G1 X-31.202 Y25.899 E.01641 G1 X-14.198 Y42.902 E.73947 G1 X-14.198 Y43.436 E.01641 G1 X-31.202 Y26.432 E.73947 G1 X-31.202 Y26.966 E.01641 G1 X-14.198 Y43.97 E.73947 G1 X-14.198 Y44.503 E.01641 G1 X-31.202 Y27.5 E.73947 G1 X-31.202 Y28.033 E.01641 G1 X-14.198 Y45.037 E.73947 G1 X-14.198 Y45.571 E.01641 G1 X-31.202 Y28.567 E.73947 G1 X-31.202 Y29.101 E.01641 G1 X-14.198 Y46.105 E.73947 G1 X-14.198 Y46.638 E.01641 G1 X-31.202 Y29.634 E.73947 G1 X-31.202 Y30.168 E.01641 G1 X-14.198 Y47.172 E.73947 G1 X-14.198 Y47.706 E.01641 G1 X-31.202 Y30.702 E.73947 G1 X-31.202 Y31.235 E.01641 G1 X-14.198 Y48.239 E.73947 G1 X-14.198 Y48.773 E.01641 G1 X-31.202 Y31.769 E.73947 G1 X-31.202 Y32.248 E.01473 G1 X-31.257 Y32.248 E.00168 G1 X-16.963 Y46.542 E.62161 G3 X-15.492 Y48.013 I-.97 J2.441 E.0658 G1 X-14.198 Y49.307 E.05625 G1 X-14.198 Y49.34 E.00103 G1 X-14.462 Y49.473 E.00909 G1 X-14.556 Y49.483 E.0029 G1 X-15.317 Y48.721 E.03312 G3 X-15.316 Y49.256 I-2.032 J.273 E.0165 G1 X-14.887 Y49.686 E.01868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.466 Y46.572 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-31.79 Y32.248 E.62294 G1 X-32.324 Y32.248 E.01641 G1 X-18.206 Y46.366 E.61397 G2 X-18.659 Y46.447 I.444 J3.776 E.01415 G1 X-32.858 Y32.248 E.6175 G1 X-33.391 Y32.248 E.01641 G1 X-19.048 Y46.592 E.6238 G2 X-19.391 Y46.782 I.549 J1.401 E.01211 G1 X-33.925 Y32.248 E.63205 G1 X-34.459 Y32.248 E.01641 G1 X-19.695 Y47.012 E.64206 G2 X-19.96 Y47.28 I.886 J1.141 E.01164 G1 X-34.992 Y32.248 E.65373 G1 X-35.526 Y32.248 E.01641 G1 X-20.187 Y47.587 E.66707 G2 X-20.374 Y47.934 I1.225 J.882 E.01215 G1 X-36.06 Y32.248 E.68217 G1 X-36.594 Y32.248 E.01641 G1 X-20.513 Y48.328 E.69931 G2 X-20.587 Y48.788 I1.71 J.51 E.01437 G1 X-37.127 Y32.248 E.71931 G1 X-37.661 Y32.248 E.01641 G1 X-20.579 Y49.33 E.74286 G2 X-20.488 Y49.752 I4.385 J-.725 E.01328 G1 X-20.691 Y49.752 E.00623 G1 X-38.195 Y32.248 E.76122 G1 X-38.728 Y32.248 E.01641 G1 X-21.224 Y49.752 E.76122 G1 X-21.758 Y49.752 E.01641 G1 X-29.42 Y42.09 E.33321 G1 X-29.568 Y41.776 E.01069 G1 X-29.691 Y41.567 E.00743 G1 X-29.88 Y41.299 E.0101 G1 X-30.139 Y41.007 E.01201 G1 X-30.429 Y40.749 E.01194 G1 X-30.697 Y40.561 E.01008 G1 X-30.906 Y40.438 E.00744 G1 X-31.22 Y40.29 E.01068 G1 X-39.262 Y32.248 E.34973 G1 X-39.796 Y32.248 E.01641 G1 X-31.956 Y40.088 E.34094 G1 X-32.526 Y40.051 E.01757 G1 X-40.329 Y32.248 E.33935 G1 X-40.863 Y32.248 E.01641 G1 X-33.011 Y40.1 E.34146 G1 X-33.44 Y40.205 E.01357 G1 X-41.397 Y32.248 E.34604 G1 X-41.93 Y32.248 E.01641 G1 X-33.824 Y40.354 E.35252 G1 X-34.171 Y40.541 E.01212 G1 X-42.464 Y32.248 E.36063 G1 X-42.998 Y32.248 E.01641 G1 X-34.485 Y40.761 E.3702 G1 X-34.767 Y41.012 E.01162 G1 X-43.531 Y32.248 E.38115 G1 X-44.065 Y32.248 E.01641 G1 X-35.018 Y41.295 E.39346 G1 X-35.237 Y41.61 E.01179 G1 X-44.599 Y32.248 E.40714 G1 X-45.132 Y32.248 E.01641 G1 X-35.422 Y41.959 E.42229 G1 X-35.57 Y42.344 E.01271 G1 X-45.666 Y32.248 E.43908 G1 X-46.2 Y32.248 E.01641 G1 X-35.673 Y42.775 E.45779 G1 X-35.719 Y43.262 E.01506 G1 X-46.734 Y32.248 E.479 G1 X-47.267 Y32.248 E.01641 G1 X-35.462 Y44.053 E.5134 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-36.876 Y42.639 ;WIPE_END G1 X-29.433 Y42.611 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-22.292 Y49.752 E.31054 G1 X-22.826 Y49.752 E.01641 G1 X-29.181 Y43.396 E.27641 M73 P11 R97 G1 X-29.23 Y43.881 E.01499 G1 X-23.359 Y49.752 E.2553 G1 X-23.893 Y49.752 E.01641 G1 X-29.335 Y44.31 E.23667 G1 X-29.484 Y44.694 E.01268 G1 X-24.427 Y49.752 E.21995 G1 X-24.96 Y49.752 E.01641 G1 X-29.671 Y45.042 E.20485 G1 X-29.891 Y45.355 E.01178 G1 X-25.494 Y49.752 E.19121 G1 X-26.028 Y49.752 E.01641 G1 X-30.142 Y45.637 E.17895 G1 X-30.425 Y45.888 E.01163 G1 X-26.561 Y49.752 E.16804 G1 X-27.095 Y49.752 E.01641 G1 X-30.74 Y46.107 E.15852 G1 X-31.089 Y46.292 E.01213 G1 X-27.629 Y49.752 E.15047 G1 X-28.162 Y49.752 E.01641 G1 X-31.474 Y46.44 E.14404 G1 X-31.905 Y46.543 E.01361 G1 X-28.696 Y49.752 E.13954 G1 X-29.23 Y49.752 E.01641 G1 X-32.392 Y46.589 E.13754 G1 X-32.967 Y46.548 E.01772 G1 X-29.763 Y49.752 E.13932 G1 X-30.297 Y49.752 E.01641 G1 X-33.712 Y46.337 E.14852 G1 X-34.053 Y46.17 E.01166 G1 X-34.329 Y45.995 E.01004 G1 X-34.761 Y45.634 E.01733 G1 X-34.983 Y45.387 E.0102 G1 X-35.125 Y45.198 E.00726 G1 X-35.3 Y44.923 E.01003 G1 X-35.467 Y44.582 E.01167 G1 X-47.801 Y32.248 E.5364 G1 X-48.335 Y32.248 E.01641 G1 X-30.831 Y49.752 E.76122 G1 X-31.364 Y49.752 E.01641 G1 X-48.868 Y32.248 E.76122 G1 X-49.402 Y32.248 E.01641 G1 X-31.898 Y49.752 E.76122 G1 X-32.432 Y49.752 E.01641 G1 X-49.936 Y32.248 E.76122 G1 X-50.469 Y32.248 E.01641 G1 X-32.966 Y49.752 E.76122 G1 X-33.499 Y49.752 E.01641 G1 X-51.003 Y32.248 E.76122 G1 X-51.537 Y32.248 E.01641 G1 X-34.033 Y49.752 E.76122 G1 X-34.567 Y49.752 E.01641 G1 X-52.07 Y32.248 E.76122 G1 X-52.604 Y32.248 E.01641 G1 X-35.1 Y49.752 E.76122 G1 X-35.634 Y49.752 E.01641 G1 X-53.138 Y32.248 E.76122 G1 X-53.671 Y32.248 E.01641 G1 X-36.168 Y49.752 E.76122 G1 X-36.701 Y49.752 E.01641 G1 X-54.205 Y32.248 E.76122 G1 X-54.739 Y32.248 E.01641 G1 X-37.235 Y49.752 E.76122 G1 X-37.769 Y49.752 E.01641 G1 X-55.273 Y32.248 E.76122 G1 X-55.806 Y32.248 E.01641 G1 X-38.302 Y49.752 E.76122 G1 X-38.836 Y49.752 E.01641 G1 X-56.34 Y32.248 E.76122 G1 X-56.874 Y32.248 E.01641 G1 X-39.37 Y49.752 E.76122 G1 X-39.903 Y49.752 E.01641 G1 X-57.407 Y32.248 E.76122 G1 X-57.941 Y32.248 E.01641 G1 X-40.437 Y49.752 E.76122 G1 X-40.971 Y49.752 E.01641 G1 X-58.475 Y32.248 E.76122 G1 X-59.008 Y32.248 E.01641 G1 X-41.505 Y49.752 E.76122 G1 X-42.038 Y49.752 E.01641 G1 X-59.542 Y32.248 E.76122 G1 X-60.076 Y32.248 E.01641 G1 X-42.572 Y49.752 E.76122 G1 X-43.106 Y49.752 E.01641 G1 X-60.609 Y32.248 E.76122 G1 X-61.143 Y32.248 E.01641 G1 X-43.639 Y49.752 E.76122 G1 X-44.173 Y49.752 E.01641 G1 X-61.677 Y32.248 E.76122 G1 X-62.21 Y32.248 E.01641 G1 X-44.707 Y49.752 E.76122 G1 X-45.24 Y49.752 E.01641 G1 X-62.744 Y32.248 E.76122 G1 X-63.278 Y32.248 E.01641 G1 X-45.774 Y49.752 E.76122 G1 X-46.308 Y49.752 E.01641 G1 X-63.811 Y32.248 E.76122 G1 X-64.345 Y32.248 E.01641 G1 X-46.841 Y49.752 E.76122 G1 X-47.375 Y49.752 E.01641 G1 X-64.879 Y32.248 E.76122 G1 X-65.413 Y32.248 E.01641 G1 X-47.909 Y49.752 E.76122 G1 X-48.442 Y49.752 E.01641 G1 X-65.946 Y32.248 E.76122 G1 X-66.48 Y32.248 E.01641 G1 X-48.976 Y49.752 E.76122 G1 X-49.51 Y49.752 E.01641 G1 X-67.014 Y32.248 E.76122 G1 X-67.547 Y32.248 E.01641 G1 X-50.044 Y49.752 E.76122 G1 X-50.577 Y49.752 E.01641 G1 X-68.081 Y32.248 E.76122 G1 X-68.615 Y32.248 E.01641 G1 X-51.111 Y49.752 E.76122 G1 X-51.645 Y49.752 E.01641 G1 X-69.148 Y32.248 E.76122 G1 X-69.682 Y32.248 E.01641 G1 X-52.178 Y49.752 E.76122 G1 X-52.712 Y49.752 E.01641 G1 X-70.216 Y32.248 E.76122 G1 X-70.749 Y32.248 E.01641 G1 X-53.246 Y49.752 E.76122 G1 X-53.779 Y49.752 E.01641 G1 X-71.283 Y32.248 E.76122 G1 X-71.817 Y32.248 E.01641 G1 X-54.313 Y49.752 E.76122 G1 X-54.847 Y49.752 E.01641 G1 X-72.35 Y32.248 E.76122 G1 X-72.884 Y32.248 E.01641 G1 X-55.211 Y49.922 E.7686 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-56.625 Y48.507 ;WIPE_END G1 X-52.615 Y42.013 Z1 F30000 G1 X-31.567 Y7.922 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-43.149 Y-3.661 E.50369 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.735 Y-2.246 ;WIPE_END G1 X-41.707 Y-9.69 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-56.769 Y-24.752 E.65504 G1 X-57.303 Y-24.752 E.01641 G1 X-42.5 Y-9.949 E.64374 G1 X-42.989 Y-9.904 E.01509 G1 X-57.837 Y-24.752 E.6457 G1 X-58.37 Y-24.752 E.01641 G1 X-43.42 Y-9.802 E.65017 G1 X-43.806 Y-9.654 E.01272 G1 X-58.904 Y-24.752 E.65657 G1 X-59.438 Y-24.752 E.01641 G1 X-44.155 Y-9.47 E.66461 G1 X-44.47 Y-9.251 E.01179 G1 X-59.971 Y-24.752 E.67411 G1 X-60.505 Y-24.752 E.01641 G1 X-44.754 Y-9.001 E.68499 G1 X-45.006 Y-8.719 E.01162 G1 X-61.039 Y-24.752 E.69724 G1 X-61.572 Y-24.752 E.01641 G1 X-45.226 Y-8.406 E.71086 G1 X-45.413 Y-8.059 E.01211 G1 X-62.106 Y-24.752 E.72594 G1 X-62.64 Y-24.752 E.01641 G1 X-45.563 Y-7.675 E.74264 G1 X-45.669 Y-7.247 E.01355 G1 X-63.173 Y-24.752 E.76124 G1 X-63.707 Y-24.752 E.01641 G1 X-45.718 Y-6.763 E.7823 G1 X-45.684 Y-6.195 E.01752 G1 X-64.241 Y-24.752 E.80703 G1 X-64.774 Y-24.752 E.01641 G1 X-45.485 Y-5.462 E.83888 G1 X-45.332 Y-5.138 E.01103 G1 X-45.211 Y-4.931 E.00737 G1 X-45.021 Y-4.659 E.0102 G1 X-44.761 Y-4.366 E.01202 G1 X-44.469 Y-4.108 E.01199 G1 X-44.199 Y-3.919 E.01014 G1 X-43.993 Y-3.798 E.00737 G1 X-43.668 Y-3.645 E.01103 G1 X-32.271 Y7.752 E.49565 G1 X-32.804 Y7.752 E.01641 G1 X-65.308 Y-24.752 E1.41355 G1 X-65.842 Y-24.752 E.01641 G1 X-33.338 Y7.752 E1.41355 G1 X-33.872 Y7.752 E.01641 G1 X-66.376 Y-24.752 E1.41355 G1 X-66.909 Y-24.752 E.01641 G1 X-34.405 Y7.752 E1.41355 G1 X-34.939 Y7.752 E.01641 G1 X-67.443 Y-24.752 E1.41355 G1 X-67.977 Y-24.752 E.01641 G1 X-35.473 Y7.752 E1.41355 G1 X-36.006 Y7.752 E.01641 G1 X-68.51 Y-24.752 E1.41355 G1 X-69.044 Y-24.752 E.01641 G1 X-36.54 Y7.752 E1.41355 G1 X-37.074 Y7.752 E.01641 G1 X-69.578 Y-24.752 E1.41355 G1 X-70.111 Y-24.752 E.01641 G1 X-37.608 Y7.752 E1.41355 G1 X-38.141 Y7.752 E.01641 G1 X-70.645 Y-24.752 E1.41355 G1 X-71.179 Y-24.752 E.01641 G1 X-38.675 Y7.752 E1.41355 G1 X-39.209 Y7.752 E.01641 G1 X-71.712 Y-24.752 E1.41355 G1 X-72.246 Y-24.752 E.01641 G1 X-39.742 Y7.752 E1.41355 G1 X-40.276 Y7.752 E.01641 G1 X-72.78 Y-24.752 E1.41355 G1 X-73.313 Y-24.752 E.01641 G1 X-40.81 Y7.752 E1.41355 G1 X-41.343 Y7.752 E.01641 G1 X-73.847 Y-24.752 E1.41355 G1 X-74.381 Y-24.752 E.01641 G1 X-41.877 Y7.752 E1.41355 G1 X-42.411 Y7.752 E.01641 G1 X-74.914 Y-24.752 E1.41355 G1 X-75.448 Y-24.752 E.01641 G1 X-42.944 Y7.752 E1.41355 G1 X-43.478 Y7.752 E.01641 G1 X-75.982 Y-24.752 E1.41355 G1 X-76.516 Y-24.752 E.01641 G1 X-61.602 Y-9.838 E.64857 G1 X-61.968 Y-9.914 E.01148 G1 X-62.238 Y-9.941 E.00836 G1 X-77.049 Y-24.752 E.64411 G1 X-77.583 Y-24.752 E.01641 G1 X-62.765 Y-9.934 E.64441 G1 X-63.222 Y-9.857 E.01425 G1 X-78.117 Y-24.752 E.64775 G1 X-78.65 Y-24.752 E.01641 G1 X-63.628 Y-9.73 E.65329 G1 X-63.994 Y-9.562 E.01237 G1 X-79.184 Y-24.752 E.6606 G1 X-79.718 Y-24.752 E.01641 G1 X-64.324 Y-9.358 E.66946 G1 X-64.622 Y-9.122 E.01168 G1 X-80.251 Y-24.752 E.67972 G1 X-80.785 Y-24.752 E.01641 G1 X-64.889 Y-8.855 E.69131 G1 X-65.125 Y-8.558 E.01168 G1 X-81.319 Y-24.752 E.70424 G1 X-81.852 Y-24.752 E.01641 G1 X-65.329 Y-8.229 E.71857 G1 X-65.498 Y-7.864 E.01237 G1 X-82.386 Y-24.752 E.73445 G1 X-82.92 Y-24.752 E.01641 G1 X-65.626 Y-7.458 E.75209 G1 X-65.703 Y-7.002 E.01423 G1 X-83.453 Y-24.752 E.77193 G1 X-83.987 Y-24.752 E.01641 G1 X-65.711 Y-6.476 E.79478 G1 X-65.685 Y-6.203 E.00843 G1 X-65.611 Y-5.842 E.01134 G1 X-84.372 Y-24.603 E.81587 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.557 Y-7.793 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-44.012 Y7.752 E.67604 G1 X-44.545 Y7.752 E.01641 G1 X-59.189 Y-6.892 E.63683 G1 X-59.18 Y-6.658 E.00719 G1 X-59.196 Y-6.365 E.00903 G1 X-45.079 Y7.752 E.61393 G1 X-45.613 Y7.752 E.01641 G1 X-59.273 Y-5.908 E.59406 G1 X-59.4 Y-5.502 E.0131 G1 X-46.147 Y7.752 E.57638 G1 X-46.68 Y7.752 E.01641 G1 X-59.568 Y-5.136 E.56048 G1 X-59.772 Y-4.806 E.01193 G1 X-47.214 Y7.752 E.54613 G1 X-47.748 Y7.752 E.01641 G1 X-60.008 Y-4.508 E.53319 G1 X-60.275 Y-4.241 E.0116 G1 X-48.281 Y7.752 E.52157 G1 X-48.815 Y7.752 E.01641 G1 X-60.572 Y-4.005 E.51129 G1 X-60.901 Y-3.801 E.01192 G1 X-49.349 Y7.752 E.50241 G1 X-49.882 Y7.752 E.01641 G1 X-61.266 Y-3.632 E.49508 G1 X-61.672 Y-3.504 E.01308 G1 X-50.416 Y7.752 E.48952 G1 X-50.95 Y7.752 E.01641 G1 X-62.128 Y-3.427 E.48614 G1 X-62.426 Y-3.41 E.00918 G1 X-62.654 Y-3.419 E.007 G1 X-51.483 Y7.752 E.48579 G1 X-52.017 Y7.752 E.01641 G1 X-63.552 Y-3.783 E.50163 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-52.381 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-84.202 Y-23.899 E1.38385 G1 X-84.202 Y-23.366 E.01641 G1 X-53.084 Y7.752 E1.35326 G1 X-53.618 Y7.752 E.01641 G1 X-84.202 Y-22.832 E1.33005 G1 X-84.202 Y-22.298 E.01641 G1 X-54.152 Y7.752 E1.30684 G1 X-54.685 Y7.752 E.01641 G1 X-84.202 Y-21.765 E1.28363 G1 X-84.202 Y-21.231 E.01641 G1 X-55.219 Y7.752 E1.26042 G1 X-55.753 Y7.752 E.01641 G1 X-84.202 Y-20.697 E1.23721 G1 X-84.202 Y-20.163 E.01641 G1 X-56.287 Y7.752 E1.214 G1 X-56.82 Y7.752 E.01641 G1 X-84.202 Y-19.63 E1.19079 G1 X-84.202 Y-19.096 E.01641 G1 X-57.354 Y7.752 E1.16758 G1 X-57.888 Y7.752 E.01641 G1 X-84.202 Y-18.562 E1.14437 G1 X-84.202 Y-18.029 E.01641 G1 X-58.421 Y7.752 E1.12116 G1 X-58.955 Y7.752 E.01641 G1 X-84.202 Y-17.495 E1.09795 G1 X-84.202 Y-16.961 E.01641 G1 X-59.489 Y7.752 E1.07474 G1 X-60.022 Y7.752 E.01641 G1 X-84.202 Y-16.428 E1.05154 G1 X-84.202 Y-15.894 E.01641 G1 X-60.556 Y7.752 E1.02833 G1 X-61.09 Y7.752 E.01641 G1 X-84.202 Y-15.36 E1.00512 G1 X-84.202 Y-14.827 E.01641 G1 X-61.623 Y7.752 E.98191 G1 X-62.157 Y7.752 E.01641 G1 X-84.202 Y-14.293 E.9587 G1 X-84.202 Y-13.759 E.01641 G1 X-62.691 Y7.752 E.93549 G1 X-63.224 Y7.752 E.01641 G1 X-84.202 Y-13.226 E.91228 G1 X-84.202 Y-12.692 E.01641 G1 X-63.758 Y7.752 E.88907 G1 X-64.292 Y7.752 E.01641 G1 X-84.202 Y-12.158 E.86586 G1 X-84.202 Y-11.752 E.01249 G1 X-84.329 Y-11.752 E.00392 G1 X-64.826 Y7.752 E.84819 G1 X-65.359 Y7.752 E.01641 G1 X-84.863 Y-11.752 E.84819 G1 X-85.397 Y-11.752 E.01641 G1 X-65.893 Y7.752 E.84819 G1 X-66.427 Y7.752 E.01641 G1 X-85.93 Y-11.752 E.84819 G1 X-86.464 Y-11.752 E.01641 G1 X-66.96 Y7.752 E.84819 G1 X-67.494 Y7.752 E.01641 G1 X-86.822 Y-11.576 E.84054 G3 X-86.371 Y-10.591 I-1.973 J1.499 E.03358 G1 X-68.028 Y7.752 E.79771 G1 X-68.561 Y7.752 E.01641 G1 X-86.3 Y-9.987 E.77143 G3 X-86.352 Y-9.505 I-1.857 J.045 E.01495 G1 X-69.095 Y7.752 E.75047 G1 X-69.629 Y7.752 E.01641 G1 X-86.467 Y-9.086 E.73227 G3 X-86.633 Y-8.718 I-1.48 J-.446 E.01244 G1 X-85.362 Y-7.448 E.05525 G1 X-85.896 Y-7.448 E.01641 G1 X-86.842 Y-8.394 E.04113 G3 X-87.092 Y-8.111 I-6.699 J-5.678 E.01163 G1 X-86.43 Y-7.448 E.02882 G1 X-86.963 Y-7.448 E.01641 G1 X-87.504 Y-7.989 E.02352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y-6.957 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-70.162 Y7.752 E.63968 G1 X-70.696 Y7.752 E.01641 G1 X-84.702 Y-6.254 E.60909 G1 X-84.702 Y-5.72 E.01641 G1 X-71.23 Y7.752 E.58588 G1 X-71.763 Y7.752 E.01641 G1 X-84.702 Y-5.187 E.56268 G1 X-84.702 Y-4.653 E.01641 G1 X-72.297 Y7.752 E.53947 G1 X-72.831 Y7.752 E.01641 G1 X-84.702 Y-4.119 E.51626 G1 X-84.702 Y-3.585 E.01641 G1 X-73.364 Y7.752 E.49305 G1 X-73.698 Y7.752 E.01026 G1 X-73.698 Y7.952 E.00615 G1 X-84.702 Y-3.052 E.47854 G1 X-84.702 Y-2.518 E.01641 G1 X-73.698 Y8.486 E.47854 G1 X-73.698 Y9.019 E.01641 G1 X-84.702 Y-1.984 E.47854 G1 X-84.702 Y-1.552 E.0133 G1 X-84.797 Y-1.546 E.00292 G1 X-73.698 Y9.553 E.48266 G1 X-73.698 Y10.087 E.01641 G1 X-85.319 Y-1.534 E.50539 G1 X-85.853 Y-1.534 E.01641 G1 X-73.698 Y10.62 E.5286 G1 X-73.698 Y11.154 E.01641 G1 X-86.387 Y-1.534 E.5518 G1 X-86.92 Y-1.534 E.01641 G1 X-73.698 Y11.688 E.57501 G1 X-73.698 Y12.221 E.01641 G1 X-87.454 Y-1.534 E.59822 G1 X-87.988 Y-1.534 E.01641 G1 X-73.698 Y12.755 E.62143 G1 X-73.698 Y13.289 E.01641 G1 X-88.521 Y-1.534 E.64464 G1 X-89.055 Y-1.534 E.01641 G1 X-73.698 Y13.823 E.66785 G1 X-73.698 Y14.356 E.01641 G1 X-89.589 Y-1.534 E.69106 G1 X-89.66 Y-1.534 E.00219 G1 X-89.856 Y-1.339 E.00851 G1 X-90.499 Y-1.982 E.02799 G2 X-90.53 Y-1.942 I.069 J.083 E.00157 G1 X-73.698 Y14.89 E.73198 G1 X-73.698 Y15.424 E.01641 G1 X-90.684 Y-1.563 E.73871 G1 X-90.684 Y-1.029 E.01641 G1 X-73.698 Y15.957 E.73871 G1 X-73.698 Y16.491 E.01641 G1 X-90.684 Y-.495 E.73871 G1 X-90.684 Y.038 E.01641 G1 X-73.698 Y17.025 E.73871 G1 X-73.698 Y17.558 E.01641 G1 X-90.684 Y.572 E.73871 G1 X-90.684 Y1.106 E.01641 G1 X-73.698 Y18.092 E.73871 G1 X-73.698 Y18.626 E.01641 G1 X-90.684 Y1.639 E.73871 G1 X-90.684 Y2.173 E.01641 G1 X-73.698 Y19.159 E.73871 G1 X-73.698 Y19.693 E.01641 G1 X-90.684 Y2.707 E.73871 G1 X-90.684 Y3.24 E.01641 G1 X-73.698 Y20.227 E.73871 G1 X-73.698 Y20.76 E.01641 G1 X-90.684 Y3.774 E.73871 G1 X-90.684 Y4.308 E.01641 G1 X-73.698 Y21.294 E.73871 G1 X-73.698 Y21.828 E.01641 G1 X-90.684 Y4.842 E.73871 G1 X-90.684 Y5.375 E.01641 G1 X-73.698 Y22.362 E.73871 G1 X-73.698 Y22.895 E.01641 G1 X-90.684 Y5.909 E.73871 G1 X-90.684 Y6.443 E.01641 G1 X-73.698 Y23.429 E.73871 G1 X-73.698 Y23.963 E.01641 G1 X-90.684 Y6.976 E.73871 G1 X-90.684 Y7.51 E.01641 G1 X-73.698 Y24.496 E.73871 G1 X-73.698 Y25.03 E.01641 G1 X-90.684 Y8.044 E.73871 G1 X-90.684 Y8.577 E.01641 G1 X-73.698 Y25.564 E.73871 G1 X-73.698 Y26.097 E.01641 G1 X-90.684 Y9.111 E.73871 G1 X-90.684 Y9.645 E.01641 G1 X-73.698 Y26.631 E.73871 G1 X-73.698 Y27.165 E.01641 G1 X-90.684 Y10.178 E.73871 G1 X-90.684 Y10.712 E.01641 G1 X-73.698 Y27.698 E.73871 G1 X-73.698 Y28.232 E.01641 G1 X-90.684 Y11.246 E.73871 G1 X-90.684 Y11.779 E.01641 G1 X-73.698 Y28.766 E.73871 G1 X-73.698 Y29.299 E.01641 G1 X-90.684 Y12.313 E.73871 G1 X-90.684 Y12.847 E.01641 G1 X-73.698 Y29.833 E.73871 G1 X-73.698 Y30.367 E.01641 G1 X-90.702 Y13.363 E.73947 G1 X-90.702 Y13.897 E.01641 G1 X-73.698 Y30.9 E.73947 G1 X-73.698 Y31.434 E.01641 G1 X-84.684 Y20.448 E.47778 G1 X-84.684 Y20.982 E.01641 G1 X-55.914 Y49.752 E1.25118 G1 X-56.448 Y49.752 E.01641 G1 X-84.684 Y21.515 E1.22797 G1 X-84.684 Y22.049 E.01641 G1 X-56.981 Y49.752 E1.20476 G1 X-57.515 Y49.752 E.01641 G1 X-84.684 Y22.583 E1.18155 G1 X-84.684 Y23.116 E.01641 G1 X-58.049 Y49.752 E1.15835 G1 X-58.582 Y49.752 E.01641 G1 X-84.684 Y23.65 E1.13514 G1 X-84.684 Y24.184 E.01641 G1 X-59.116 Y49.752 E1.11193 G1 X-59.65 Y49.752 E.01641 G1 X-84.684 Y24.717 E1.08872 G1 X-84.684 Y25.251 E.01641 G1 X-60.184 Y49.752 E1.06551 G1 X-60.717 Y49.752 E.01641 G1 X-84.69 Y25.779 E1.04256 G1 X-84.707 Y26.266 E.01498 G1 X-84.737 Y26.266 E.00092 G1 X-61.251 Y49.752 E1.02139 G1 X-61.785 Y49.752 E.01641 G1 X-69.403 Y42.133 E.33133 G1 X-69.558 Y41.796 E.01142 G1 X-69.683 Y41.58 E.00767 G1 X-69.878 Y41.301 E.01047 G1 X-70.136 Y41.009 E.01199 G1 X-70.43 Y40.748 E.01207 G1 X-70.709 Y40.553 E.01047 G1 X-70.926 Y40.428 E.00769 G1 X-71.263 Y40.273 E.01141 G1 X-85.271 Y26.266 E.60918 G1 X-85.805 Y26.266 E.01641 G1 X-71.987 Y40.083 E.6009 G1 X-72.552 Y40.052 E.01738 G1 X-86.338 Y26.266 E.59956 G1 X-86.872 Y26.266 E.01641 G1 X-73.033 Y40.104 E.60182 G1 X-73.46 Y40.212 E.01352 G1 X-87.406 Y26.266 E.6065 G1 X-87.939 Y26.266 E.01641 G1 X-73.842 Y40.363 E.61307 G1 X-74.188 Y40.551 E.0121 G1 X-88.473 Y26.266 E.62125 G1 X-89.007 Y26.266 E.01641 G1 X-74.5 Y40.773 E.63089 G1 X-74.78 Y41.026 E.01162 G1 X-89.54 Y26.266 E.6419 G1 X-89.59 Y26.266 E.00152 G1 X-89.786 Y26.461 E.00851 G1 X-90.429 Y25.818 E.02799 G1 X-90.476 Y25.864 E.00201 G1 X-75.03 Y41.31 E.67175 G1 X-75.247 Y41.626 E.0118 G1 X-90.684 Y26.189 E.67136 G1 X-90.684 Y26.723 E.01641 G1 X-75.431 Y41.977 E.66337 G1 X-75.576 Y42.364 E.01274 G1 X-90.684 Y27.256 E.65703 G1 X-90.684 Y27.79 E.01641 G1 X-75.677 Y42.797 E.65264 G1 X-75.72 Y43.288 E.01516 G1 X-90.684 Y28.324 E.65079 G1 X-90.684 Y28.857 E.01641 G1 X-75.454 Y44.088 E.66237 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-76.868 Y42.674 ;WIPE_END G1 X-69.425 Y42.645 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-62.318 Y49.752 E.30908 G1 X-62.852 Y49.752 E.01641 G1 X-69.182 Y43.422 E.2753 G1 X-69.234 Y43.903 E.0149 G1 X-63.386 Y49.752 E.25434 G1 X-63.919 Y49.752 E.01641 G1 X-69.342 Y44.33 E.23581 G1 X-69.493 Y44.712 E.01265 G1 X-64.453 Y49.752 E.21918 G1 X-64.987 Y49.752 E.01641 G1 X-69.681 Y45.058 E.20415 G1 X-69.903 Y45.37 E.01177 G1 X-65.52 Y49.752 E.19058 G1 X-66.054 Y49.752 E.01641 G1 X-70.156 Y45.65 E.17838 G1 X-70.44 Y45.9 E.01163 G1 X-66.588 Y49.752 E.16753 G1 X-67.121 Y49.752 E.01641 G1 X-70.756 Y46.117 E.15808 G1 X-71.107 Y46.301 E.01216 G1 X-67.655 Y49.752 E.1501 G1 X-68.189 Y49.752 E.01641 G1 X-71.494 Y46.446 E.14376 G1 X-71.927 Y46.547 E.01366 G1 X-68.723 Y49.752 E.13937 G1 X-69.256 Y49.752 E.01641 G1 X-72.418 Y46.59 E.13751 G1 X-72.759 Y46.574 E.01049 G1 X-72.999 Y46.542 E.00745 G1 X-69.79 Y49.752 E.13957 G1 X-70.324 Y49.752 E.01641 G1 X-73.759 Y46.316 E.14942 G1 X-74.071 Y46.16 E.01072 G1 X-74.339 Y45.988 E.00979 G1 X-74.764 Y45.631 E.01706 G1 X-75.118 Y45.209 E.01696 G1 X-75.29 Y44.941 E.00979 G1 X-75.446 Y44.629 E.01071 G1 X-90.684 Y29.391 E.66269 G1 X-90.684 Y29.925 E.01641 M73 P11 R96 G1 X-70.857 Y49.752 E.86225 G1 X-71.391 Y49.752 E.01641 G1 X-90.684 Y30.458 E.83905 G1 X-90.684 Y30.992 E.01641 G1 X-71.925 Y49.752 E.81584 G1 X-72.458 Y49.752 E.01641 G1 X-90.684 Y31.526 E.79263 G1 X-90.684 Y32.06 E.01641 G1 X-72.992 Y49.752 E.76942 G1 X-73.526 Y49.752 E.01641 G1 X-90.684 Y32.593 E.74621 G1 X-90.684 Y33.127 E.01641 G1 X-74.059 Y49.752 E.723 G1 X-74.593 Y49.752 E.01641 G1 X-90.684 Y33.661 E.69979 G1 X-90.684 Y34.194 E.01641 G1 X-75.127 Y49.752 E.67658 G1 X-75.66 Y49.752 E.01641 G1 X-90.684 Y34.728 E.65337 G1 X-90.684 Y35.262 E.01641 G1 X-76.194 Y49.752 E.63016 G1 X-76.728 Y49.752 E.01641 G1 X-90.684 Y35.795 E.60695 G1 X-90.684 Y36.329 E.01641 G1 X-77.261 Y49.752 E.58374 G1 X-77.795 Y49.752 E.01641 G1 X-90.684 Y36.863 E.56053 G1 X-90.684 Y37.396 E.01641 G1 X-78.329 Y49.752 E.53732 G1 X-78.863 Y49.752 E.01641 G1 X-90.684 Y37.93 E.51412 G1 X-90.684 Y38.464 E.01641 G1 X-79.396 Y49.752 E.49091 G1 X-79.93 Y49.752 E.01641 G1 X-90.684 Y38.997 E.4677 G1 X-90.684 Y39.531 E.01641 G1 X-80.464 Y49.752 E.44449 G1 X-80.997 Y49.752 E.01641 G1 X-90.684 Y40.065 E.42128 G1 X-90.684 Y40.598 E.01641 G1 X-81.531 Y49.752 E.39807 G1 X-82.065 Y49.752 E.01641 G1 X-90.684 Y41.132 E.37486 G1 X-90.684 Y41.666 E.01641 G1 X-82.598 Y49.752 E.35165 G1 X-83.132 Y49.752 E.01641 G1 X-84.345 Y48.539 E.05274 G3 X-84.306 Y49.111 I-2.723 J.469 E.01766 G1 X-83.496 Y49.922 E.03525 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.266 Y46.618 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.684 Y42.2 E.19216 G1 X-90.684 Y42.733 E.01641 G1 X-87.061 Y46.356 E.15757 G2 X-87.532 Y46.419 I.001 J1.821 E.01466 G1 X-90.872 Y43.08 E.14522 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-89.457 Y44.494 ;WIPE_END G1 X-88.164 Y36.972 Z1 F30000 G1 X-85.228 Y19.904 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.702 Y14.43 E.23804 G1 X-90.702 Y14.964 E.01641 G1 X-85.932 Y19.734 E.20746 G1 X-86.465 Y19.734 E.01641 G1 X-90.702 Y15.498 E.18425 G1 X-90.702 Y16.031 E.01641 G1 X-86.999 Y19.734 E.16104 G1 X-87.412 Y19.734 E.01271 G1 X-87.43 Y19.752 E.00076 G1 X-87.515 Y19.752 E.00263 G1 X-90.872 Y16.395 E.14597 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-89.457 Y17.81 ;WIPE_END G1 X-81.829 Y18.073 Z1 F30000 G1 X-14.947 Y20.379 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537316 G1 F15000 G1 X-14.949 Y26.299 E.23848 ;WIDTH:0.520873 G1 X-14.993 Y26.334 E.00221 ;WIDTH:0.480523 G1 X-15.037 Y26.37 E.00202 ;WIDTH:0.420313 G3 X-15.194 Y26.444 I-.177 J-.172 E.00547 G1 X-15.732 Y26.444 E.01652 G1 X-14.394 Y27.782 E.05817 G1 X-14.394 Y26.748 E.0318 ;WIDTH:0.43955 G1 X-14.414 Y26.584 E.00534 ;WIDTH:0.478651 G1 X-14.433 Y26.42 E.00587 ;WIDTH:0.536292 G1 X-14.453 Y26.256 E.00664 G1 X-14.453 Y20.583 E.22805 G1 X-14.641 Y20.636 E.00783 G1 X-14.917 Y20.405 E.01446 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.792 Y26.696 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.522436 G1 F15000 G2 X-14.783 Y26.782 I-.029 J.047 E.00966 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.792 Y26.8 G1 X-14.852 Y26.8 G1 X-14.882 Y26.748 G1 X-14.852 Y26.696 G1 X-14.792 Y26.696 ;WIPE_END G1 X-13.122 Y19.248 Z1 F30000 G1 X.795 Y-42.79 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X.795 Y-42.355 E.01443 G1 X-6.495 Y-42.355 E.24182 G1 X-6.495 Y-49.645 E.24182 G1 X.795 Y-49.645 E.24182 G1 X.795 Y-42.83 E.22607 G1 X.36 Y-42.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-6.06 Y-42.79 E.19727 G1 X-6.06 Y-49.21 E.19727 G1 X.36 Y-49.21 E.19727 G1 X.36 Y-42.83 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.64 Y-42.818 ;WIPE_END G1 X-6.902 Y-42.052 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-7.298 Y-42.052 E.01313 G1 X-7.298 Y-49.948 E.26192 G1 X-6.902 Y-49.948 E.01313 G1 X-6.902 Y-42.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-7.298 Y-42.052 G1 X-7.298 Y-43.654 ;WIPE_END G1 X.334 Y-43.768 Z1 F30000 G1 X1.798 Y-43.79 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X1.798 Y-49.052 E.17455 G1 X5.902 Y-49.052 E.13614 G1 X5.902 Y-42.948 E.20249 G1 X1.798 Y-42.948 E.13614 G1 X1.798 Y-43.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.205 Y-43.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.205 Y-48.645 E.16105 G1 X5.495 Y-48.645 E.10914 G1 X5.495 Y-43.355 E.17548 G1 X2.205 Y-43.355 E.10914 G1 X2.205 Y-43.75 E.0131 G1 X2.64 Y-43.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.64 Y-48.21 E.13581 G1 X5.06 Y-48.21 E.07436 G1 X5.06 Y-43.79 E.13581 G1 X2.68 Y-43.79 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.662 Y-45.79 ;WIPE_END G1 X1.202 Y-42.79 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X1.202 Y-49.948 E.23744 G1 X7.298 Y-49.948 E.20221 G1 X7.298 Y-42.052 E.26192 G1 X1.202 Y-42.052 E.20221 G1 X1.202 Y-42.75 E.02315 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X1.202 Y-44.75 ;WIPE_END G1 X7.705 Y-41.645 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-7.705 Y-41.645 E.51118 G1 X-7.705 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.51118 G1 X7.705 Y-41.685 E.2876 G1 X8.14 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.106 Y-42.5 Z1 F30000 G1 Z.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X1.406 Y-42.5 E.18719 G1 X1.744 Y-42.256 F30000 ;WIDTH:0.373259 G1 F12000 G1 X1.683 Y-42.378 E.00368 ;WIDTH:0.349663 G1 X1.622 Y-42.5 E.00341 ;WIDTH:0.302472 G1 X1.561 Y-42.622 E.00289 ;WIDTH:0.25528 G1 X1.5 Y-42.744 E.00236 ;WIDTH:0.23217 G1 X1.5 Y-49.256 E.10041 G1 X1.561 Y-49.378 E.00211 ;WIDTH:0.302473 G1 X1.622 Y-49.5 E.00289 ;WIDTH:0.349664 G1 X1.683 Y-49.622 E.00341 ;WIDTH:0.396855 G1 X1.744 Y-49.744 E.00394 G1 X1.406 Y-49.5 F30000 ;WIDTH:0.531684 G1 F12000 G1 X6.106 Y-49.5 E.18719 G1 X6.353 Y-48.798 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537302 G1 F15000 G1 X6.353 Y-43.202 E.22541 G1 X6.455 Y-43.169 E.00431 ;WIDTH:0.520342 G1 X6.472 Y-43.103 E.00267 ;WIDTH:0.48642 G1 X6.488 Y-43.036 E.00248 ;WIDTH:0.436317 G1 X6.505 Y-42.969 E.0022 G1 X6.505 Y-42.452 E.01659 G1 X6.898 Y-42.452 E.01259 G1 X6.898 Y-42.969 E.01659 ;WIDTH:0.452498 G1 X6.881 Y-43.103 E.00448 ;WIDTH:0.48642 G1 X6.864 Y-43.236 E.00485 ;WIDTH:0.53688 G1 X6.847 Y-43.369 E.00541 G1 X6.847 Y-48.631 E.21179 ;WIDTH:0.520342 G1 X6.864 Y-48.764 E.00523 ;WIDTH:0.48642 G1 X6.881 Y-48.897 E.00485 ;WIDTH:0.436996 G1 X6.898 Y-49.031 E.00431 G1 X6.898 Y-49.548 E.01662 G1 X6.505 Y-49.548 E.01261 G1 X6.505 Y-49.031 E.01662 ;WIDTH:0.452498 G1 X6.488 Y-48.964 E.00229 ;WIDTH:0.48642 G1 X6.472 Y-48.897 E.00248 ;WIDTH:0.520124 G3 X6.391 Y-48.81 I-.068 J.018 E.00551 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.999 Y-50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-6.699 Y-50 E.19 G1 X-6.699 Y-42 F30000 G1 F12000 G1 X.999 Y-42 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.001 Y-42 ;WIPE_END G1 X5.228 Y-37.59 Z1 F30000 G1 X77.698 Y13.71 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X77.698 Y8.448 E.17455 G1 X81.802 Y8.448 E.13614 G1 X81.802 Y14.552 E.20249 G1 X77.698 Y14.552 E.13614 G1 X77.698 Y13.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X78.105 Y13.71 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X78.105 Y8.855 E.16105 G1 X81.395 Y8.855 E.10914 G1 X81.395 Y14.145 E.17548 G1 X78.105 Y14.145 E.10914 G1 X78.105 Y13.75 E.0131 G1 X78.54 Y13.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X78.54 Y9.29 E.13581 G1 X80.96 Y9.29 E.07436 G1 X80.96 Y13.71 E.13581 G1 X78.58 Y13.71 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X78.562 Y11.71 ;WIPE_END G1 X74.198 Y15.448 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X82.398 Y7.552 E.27519 G1 X82.398 Y15.448 E.26192 G1 X74.238 Y15.448 E.27068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.102 Y15.448 G1 X74.102 Y13.584 ;WIPE_END G1 X81.264 Y10.946 Z1 F30000 G1 X89.66 Y7.855 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X90.095 Y7.855 E.01443 G1 X90.095 Y15.145 E.24182 G1 X82.805 Y15.145 E.24182 G1 X82.805 Y7.855 E.24182 G1 X89.62 Y7.855 E.22607 G1 X89.66 Y8.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X89.66 Y14.71 E.19727 G1 X83.24 Y14.71 E.19727 G1 X83.24 Y8.29 E.19727 G1 X89.62 Y8.29 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.502 Y8.29 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X90.502 Y7.552 E.02448 G1 X90.898 Y7.552 E.01313 G1 X90.898 Y15.448 E.26192 G1 X90.502 Y15.448 E.01313 G1 X90.502 Y8.33 E.23611 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X90.502 Y7.552 G1 X90.898 Y7.552 G1 X90.898 Y8.378 ;WIPE_END G1 X83.961 Y11.562 Z1 F30000 G1 X74.605 Y15.855 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X91.305 Y7.145 E.58416 G1 X91.305 Y15.855 E.28893 G1 X74.645 Y15.855 E.55264 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z1 F30000 G1 Z.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.446 Y15.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X74.383 Y15.125 E.00204 G1 X74.448 Y15.16 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.494 Y15 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X82.194 Y15 E.18719 G1 X82.039 Y14.878 F30000 ;WIDTH:0.232166 G1 F12000 G1 X82.1 Y14.756 E.00211 G1 X82.1 Y8.244 E.10041 ;WIDTH:0.255276 G1 X82.039 Y8.122 E.00236 ;WIDTH:0.302466 G1 X81.978 Y8 E.00289 ;WIDTH:0.349657 G1 X81.917 Y7.878 E.00341 ;WIDTH:0.373252 G1 X81.856 Y7.756 E.00368 G1 X82.194 Y8 F30000 ;WIDTH:0.531684 G1 F12000 G1 X77.494 Y8 E.18719 G1 X77.086 Y8.674 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.602787 G1 F13669.446 G1 X77.063 Y8.572 E.00479 ;WIDTH:0.562731 G1 F14722.784 G1 X77.041 Y8.469 E.00444 ;WIDTH:0.530073 G1 F15000 G1 X77.054 Y8.225 E.00972 ;WIDTH:0.494171 G1 X77.066 Y7.98 E.00901 G1 X76.299 Y7.98 E.0282 G1 X76.683 Y8.364 E.01994 ;WIDTH:0.513953 G1 X76.807 Y8.459 E.006 ;WIDTH:0.557497 G1 F14872.53 G1 X76.93 Y8.555 E.00655 ;WIDTH:0.57927 G1 F14268.801 G1 X77.054 Y8.65 E.00683 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y9.887 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.424713 G1 F15000 G1 X75.533 Y7.748 E.0941 G1 X74.993 Y7.748 E.0168 G1 X77.502 Y10.257 E.11039 G1 X77.502 Y10.797 E.0168 G1 X74.453 Y7.748 E.13415 G1 X74.298 Y7.748 E.00482 G1 X74.298 Y8.133 E.01198 G1 X77.502 Y11.337 E.14096 G1 X77.502 Y11.877 E.0168 G1 X74.298 Y8.673 E.14096 G1 X74.298 Y9.213 E.0168 G1 X77.502 Y12.417 E.14096 G1 X77.502 Y12.957 E.0168 G1 X74.298 Y9.753 E.14096 G1 X74.298 Y10.293 E.0168 G1 X77.502 Y13.497 E.14096 G1 X77.502 Y14.037 E.0168 G1 X74.298 Y10.833 E.14096 G1 X74.298 Y11.373 E.0168 G1 X77.463 Y14.538 E.13926 G1 X77.298 Y14.538 E.00513 G1 X77.298 Y14.913 E.01166 G1 X74.298 Y11.913 E.13201 G1 X74.298 Y12.453 E.0168 G1 X77.097 Y15.252 E.12316 G1 X76.557 Y15.252 E.0168 G1 X74.298 Y12.993 E.0994 G1 X74.298 Y13.533 E.0168 G1 X76.017 Y15.252 E.07564 G1 X75.477 Y15.252 E.0168 G1 X74.298 Y14.073 E.05189 G1 X74.298 Y14.612 E.0168 G1 X75.107 Y15.422 E.0356 SET_VELOCITY_LIMIT ACCEL=10000 G1 X81.856 Y15.244 F30000 ;TYPE:Gap infill ;WIDTH:0.396847 G1 F12000 G1 X81.917 Y15.122 E.00394 ;WIDTH:0.349657 G1 X81.978 Y15 E.00341 ;WIDTH:0.302467 G1 X82.039 Y14.878 E.00289 G1 X82.601 Y15.5 F30000 ;WIDTH:0.345842 G1 F12000 G1 X90.299 Y15.5 E.19 G1 X90.299 Y7.5 F30000 G1 F12000 G1 X82.601 Y7.5 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X84.601 Y7.5 ;WIPE_END G1 X79.338 Y13.027 Z1 F30000 G1 X55.548 Y38.01 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z1 F30000 G1 Z.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X49.645 Y-5.756 Z1 F30000 G1 X3.102 Y40.648 Z1 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X35.998 Y-10.448 E1.09122 G1 X35.998 Y40.648 E1.69494 G1 X3.142 Y40.648 E1.08989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X3.446 Y40.288 Z1 F30000 G1 Z.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X3.383 Y40.325 E.00204 G1 X3.448 Y40.36 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-8.141 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420495 G1 F15000 G1 X33.861 Y-10.252 E.09185 G1 X33.327 Y-10.252 E.01643 G1 X35.802 Y-7.777 E.10771 G1 X35.802 Y-7.243 E.01643 G1 X32.793 Y-10.252 E.13094 G1 X32.259 Y-10.252 E.01643 G1 X35.802 Y-6.709 E.15417 G1 X35.802 Y-6.175 E.01643 G1 X31.725 Y-10.252 E.17741 G1 X31.191 Y-10.252 E.01643 G1 X35.802 Y-5.641 E.20064 G1 X35.802 Y-5.107 E.01643 G1 X30.657 Y-10.252 E.22388 G1 X30.123 Y-10.252 E.01643 G1 X35.802 Y-4.573 E.24711 G1 X35.802 Y-4.039 E.01643 G1 X29.589 Y-10.252 E.27034 G1 X29.055 Y-10.252 E.01643 G1 X35.802 Y-3.505 E.29358 G1 X35.802 Y-2.971 E.01643 G1 X28.521 Y-10.252 E.31681 G1 X27.987 Y-10.252 E.01643 G1 X35.802 Y-2.437 E.34005 G1 X35.802 Y-1.903 E.01643 G1 X27.453 Y-10.252 E.36328 G1 X26.919 Y-10.252 E.01643 G1 X35.802 Y-1.369 E.38652 G1 X35.802 Y-.835 E.01643 G1 X26.385 Y-10.252 E.40975 G1 X25.851 Y-10.252 E.01643 G1 X35.802 Y-.301 E.43298 G1 X35.802 Y.233 E.01643 G1 X25.317 Y-10.252 E.45622 G1 X24.783 Y-10.252 E.01643 G1 X35.802 Y.767 E.47945 G1 X35.802 Y1.301 E.01643 G1 X24.249 Y-10.252 E.50269 G1 X23.715 Y-10.252 E.01643 G1 X35.802 Y1.835 E.52592 G1 X35.802 Y2.369 E.01643 G1 X23.181 Y-10.252 E.54915 G1 X22.647 Y-10.252 E.01643 G1 X35.802 Y2.903 E.57239 G1 X35.802 Y3.437 E.01643 G1 X22.113 Y-10.252 E.59562 G1 X21.579 Y-10.252 E.01643 G1 X35.802 Y3.971 E.61886 G1 X35.802 Y4.505 E.01643 G1 X21.045 Y-10.252 E.64209 G1 X20.511 Y-10.252 E.01643 G1 X35.802 Y5.039 E.66533 G1 X35.802 Y5.573 E.01643 G1 X19.977 Y-10.252 E.68856 G1 X19.443 Y-10.252 E.01643 G1 X35.802 Y6.107 E.71179 G1 X35.802 Y6.641 E.01643 G1 X18.909 Y-10.252 E.73503 G1 X18.375 Y-10.252 E.01643 G1 X35.802 Y7.175 E.75826 G1 X35.802 Y7.709 E.01643 G1 X17.841 Y-10.252 E.7815 G1 X17.307 Y-10.252 E.01643 G1 X35.802 Y8.243 E.80473 G1 X35.802 Y8.777 E.01643 G1 X16.773 Y-10.252 E.82796 G1 X16.239 Y-10.252 E.01643 G1 X35.802 Y9.311 E.8512 G1 X35.802 Y9.844 E.01643 G1 X15.706 Y-10.252 E.87443 G1 X15.172 Y-10.252 E.01643 G1 X35.802 Y10.378 E.89767 G1 X35.802 Y10.912 E.01643 G1 X14.638 Y-10.252 E.9209 G1 X14.104 Y-10.252 E.01643 G1 X35.802 Y11.446 E.94413 G1 X35.802 Y11.98 E.01643 G1 X13.57 Y-10.252 E.96737 G1 X13.036 Y-10.252 E.01643 G1 X35.802 Y12.514 E.9906 G1 X35.802 Y13.048 E.01643 G1 X12.502 Y-10.252 E1.01384 G1 X11.968 Y-10.252 E.01643 G1 X35.802 Y13.582 E1.03707 G1 X35.802 Y14.116 E.01643 G1 X11.434 Y-10.252 E1.06031 G1 X10.9 Y-10.252 E.01643 G1 X35.802 Y14.65 E1.08354 G1 X35.802 Y15.184 E.01643 G1 X10.366 Y-10.252 E1.10677 G1 X9.832 Y-10.252 E.01643 M73 P12 R96 G1 X35.802 Y15.718 E1.13001 G1 X35.802 Y16.252 E.01643 G1 X9.298 Y-10.252 E1.15324 G1 X8.764 Y-10.252 E.01643 G1 X35.802 Y16.786 E1.17648 G1 X35.802 Y17.32 E.01643 G1 X8.23 Y-10.252 E1.19971 G1 X7.696 Y-10.252 E.01643 G1 X35.802 Y17.854 E1.22294 G1 X35.802 Y18.388 E.01643 G1 X7.162 Y-10.252 E1.24618 G1 X6.628 Y-10.252 E.01643 G1 X35.802 Y18.922 E1.26941 G1 X35.802 Y19.456 E.01643 G1 X6.094 Y-10.252 E1.29265 G1 X5.56 Y-10.252 E.01643 G1 X35.802 Y19.99 E1.31588 G1 X35.802 Y20.524 E.01643 G1 X5.026 Y-10.252 E1.33912 G1 X4.492 Y-10.252 E.01643 G1 X35.802 Y21.058 E1.36235 G1 X35.802 Y21.592 E.01643 G1 X3.958 Y-10.252 E1.38558 G1 X3.424 Y-10.252 E.01643 G1 X35.802 Y22.126 E1.40882 G1 X35.802 Y22.66 E.01643 G1 X3.298 Y-9.844 E1.4143 G1 X3.298 Y-9.31 E.01643 G1 X35.802 Y23.194 E1.4143 G1 X35.802 Y23.728 E.01643 G1 X3.298 Y-8.776 E1.4143 G1 X3.298 Y-8.242 E.01643 G1 X35.802 Y24.262 E1.4143 G1 X35.802 Y24.796 E.01643 G1 X3.298 Y-7.708 E1.4143 G1 X3.298 Y-7.174 E.01643 G1 X35.802 Y25.33 E1.4143 G1 X35.802 Y25.864 E.01643 G1 X3.298 Y-6.64 E1.4143 G1 X3.298 Y-6.106 E.01643 G1 X35.802 Y26.398 E1.4143 G1 X35.802 Y26.932 E.01643 G1 X3.298 Y-5.572 E1.4143 G1 X3.298 Y-5.038 E.01643 G1 X35.802 Y27.466 E1.4143 G1 X35.802 Y28 E.01643 G1 X3.298 Y-4.504 E1.4143 G1 X3.298 Y-3.97 E.01643 G1 X35.802 Y28.534 E1.4143 G1 X35.802 Y29.067 E.01643 G1 X3.298 Y-3.436 E1.4143 G1 X3.298 Y-2.902 E.01643 G1 X35.802 Y29.601 E1.4143 G1 X35.802 Y30.135 E.01643 G1 X3.298 Y-2.368 E1.4143 G1 X3.298 Y-1.834 E.01643 G1 X35.802 Y30.669 E1.4143 G1 X35.802 Y31.203 E.01643 G1 X3.298 Y-1.3 E1.4143 G1 X3.298 Y-.766 E.01643 G1 X35.802 Y31.737 E1.4143 G1 X35.802 Y32.271 E.01643 G1 X3.298 Y-.232 E1.4143 G1 X3.298 Y.302 E.01643 G1 X35.802 Y32.805 E1.4143 G1 X35.802 Y33.339 E.01643 G1 X3.298 Y.835 E1.4143 G1 X3.298 Y1.369 E.01643 G1 X35.802 Y33.873 E1.4143 G1 X35.802 Y34.407 E.01643 G1 X3.298 Y1.903 E1.4143 G1 X3.298 Y2.437 E.01643 G1 X35.802 Y34.941 E1.4143 G1 X35.802 Y35.475 E.01643 G1 X3.298 Y2.971 E1.4143 G1 X3.298 Y3.505 E.01643 G1 X35.802 Y36.009 E1.4143 G1 X35.802 Y36.543 E.01643 G1 X3.298 Y4.039 E1.4143 G1 X3.298 Y4.573 E.01643 G1 X35.802 Y37.077 E1.4143 G1 X35.802 Y37.611 E.01643 G1 X3.298 Y5.107 E1.4143 G1 X3.298 Y5.641 E.01643 G1 X35.802 Y38.145 E1.4143 G1 X35.802 Y38.679 E.01643 G1 X3.298 Y6.175 E1.4143 G1 X3.298 Y6.709 E.01643 G1 X35.802 Y39.213 E1.4143 G1 X35.802 Y39.747 E.01643 G1 X3.298 Y7.243 E1.4143 G1 X3.298 Y7.777 E.01643 G1 X35.802 Y40.281 E1.4143 G1 X35.802 Y40.452 E.00526 G1 X35.439 Y40.452 E.01117 G1 X3.298 Y8.311 E1.39851 G1 X3.298 Y8.845 E.01643 G1 X34.905 Y40.452 E1.37527 G1 X34.371 Y40.452 E.01643 G1 X3.298 Y9.379 E1.35204 G1 X3.298 Y9.913 E.01643 G1 X33.837 Y40.452 E1.32881 G1 X33.303 Y40.452 E.01643 G1 X3.298 Y10.447 E1.30557 G1 X3.298 Y10.981 E.01643 G1 X32.769 Y40.452 E1.28234 G1 X32.235 Y40.452 E.01643 G1 X3.298 Y11.515 E1.2591 G1 X3.298 Y12.049 E.01643 G1 X31.701 Y40.452 E1.23587 G1 X31.167 Y40.452 E.01643 G1 X3.298 Y12.583 E1.21263 G1 X3.298 Y13.117 E.01643 G1 X30.633 Y40.452 E1.1894 G1 X30.099 Y40.452 E.01643 G1 X3.298 Y13.651 E1.16617 G1 X3.298 Y14.185 E.01643 G1 X29.565 Y40.452 E1.14293 G1 X29.031 Y40.452 E.01643 G1 X3.298 Y14.719 E1.1197 G1 X3.298 Y15.253 E.01643 G1 X28.497 Y40.452 E1.09646 G1 X27.963 Y40.452 E.01643 G1 X3.298 Y15.787 E1.07323 G1 X3.298 Y16.321 E.01643 G1 X27.429 Y40.452 E1.05 G1 X26.895 Y40.452 E.01643 G1 X3.298 Y16.855 E1.02676 G1 X3.298 Y17.389 E.01643 G1 X26.361 Y40.452 E1.00353 G1 X25.827 Y40.452 E.01643 G1 X3.298 Y17.923 E.98029 G1 X3.298 Y18.457 E.01643 G1 X25.293 Y40.452 E.95706 G1 X24.759 Y40.452 E.01643 G1 X3.298 Y18.991 E.93383 G1 X3.298 Y19.524 E.01643 G1 X24.226 Y40.452 E.91059 G1 X23.692 Y40.452 E.01643 G1 X3.298 Y20.058 E.88736 G1 X3.298 Y20.592 E.01643 G1 X23.158 Y40.452 E.86412 G1 X22.624 Y40.452 E.01643 G1 X3.298 Y21.126 E.84089 G1 X3.298 Y21.66 E.01643 G1 X22.09 Y40.452 E.81765 G1 X21.556 Y40.452 E.01643 G1 X3.298 Y22.194 E.79442 G1 X3.298 Y22.728 E.01643 G1 X21.022 Y40.452 E.77119 G1 X20.488 Y40.452 E.01643 G1 X3.298 Y23.262 E.74795 G1 X3.298 Y23.796 E.01643 G1 X19.954 Y40.452 E.72472 G1 X19.42 Y40.452 E.01643 G1 X3.298 Y24.33 E.70148 G1 X3.298 Y24.864 E.01643 G1 X18.886 Y40.452 E.67825 G1 X18.352 Y40.452 E.01643 G1 X3.298 Y25.398 E.65502 G1 X3.298 Y25.932 E.01643 G1 X17.818 Y40.452 E.63178 G1 X17.284 Y40.452 E.01643 G1 X3.298 Y26.466 E.60855 G1 X3.298 Y27 E.01643 G1 X16.75 Y40.452 E.58531 G1 X16.216 Y40.452 E.01643 G1 X3.298 Y27.534 E.56208 G1 X3.298 Y28.068 E.01643 G1 X15.682 Y40.452 E.53884 G1 X15.148 Y40.452 E.01643 G1 X3.298 Y28.602 E.51561 G1 X3.298 Y29.136 E.01643 G1 X14.614 Y40.452 E.49238 G1 X14.08 Y40.452 E.01643 G1 X3.298 Y29.67 E.46914 G1 X3.298 Y30.204 E.01643 G1 X13.546 Y40.452 E.44591 G1 X13.012 Y40.452 E.01643 G1 X3.298 Y30.738 E.42267 G1 X3.298 Y31.272 E.01643 G1 X12.478 Y40.452 E.39944 G1 X11.944 Y40.452 E.01643 G1 X3.298 Y31.806 E.37621 G1 X3.298 Y32.34 E.01643 G1 X11.41 Y40.452 E.35297 G1 X10.876 Y40.452 E.01643 G1 X3.298 Y32.874 E.32974 G1 X3.298 Y33.408 E.01643 G1 X10.342 Y40.452 E.3065 G1 X9.808 Y40.452 E.01643 G1 X3.298 Y33.942 E.28327 G1 X3.298 Y34.476 E.01643 G1 X9.274 Y40.452 E.26004 G1 X8.74 Y40.452 E.01643 G1 X3.298 Y35.01 E.2368 G1 X3.298 Y35.544 E.01643 G1 X8.206 Y40.452 E.21357 G1 X7.672 Y40.452 E.01643 G1 X3.298 Y36.078 E.19033 G1 X3.298 Y36.612 E.01643 G1 X7.138 Y40.452 E.1671 G1 X6.604 Y40.452 E.01643 G1 X3.298 Y37.146 E.14386 G1 X3.298 Y37.68 E.01643 G1 X6.07 Y40.452 E.12063 G1 X5.537 Y40.452 E.01643 G1 X3.298 Y38.214 E.0974 G1 X3.298 Y38.747 E.01643 G1 X5.003 Y40.452 E.07416 G1 X4.469 Y40.452 E.01643 G1 X3.298 Y39.281 E.05093 G1 X3.298 Y39.815 E.01643 G1 X4.104 Y40.622 E.03508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.544 Y-9.137 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.544538 G1 F15000 G1 X35.544 Y-9.994 E.035 G1 X34.687 Y-9.994 E.035 G1 X35.515 Y-9.166 E.04787 ;LAYER_CHANGE ;Z:0.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;0.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.687 Y-9.994 G1 X35.516 Y-9.994 ;WIPE_END ;AFTER_LAYER_CHANGE ;0.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.2 I-.638 J-1.036 P1 F30000 G1 X-31.398 Y31.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.031 Y25.231 Z1.2 F30000 G1 X-64.59 Y-6.463 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.603 Y-6.68 E.00722 G3 X-63.008 Y-8.761 I2.152 J-.002 E.09352 G1 X-62.731 Y-8.816 E.00935 G3 X-64.584 Y-6.399 I.281 J2.134 E.33632 G1 X-64.586 Y-6.423 E.0008 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y-6.489 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.195 Y-6.68 E.00633 G3 X-62.902 Y-8.367 I1.745 J-.002 E.07581 G1 X-62.678 Y-8.411 E.00758 G3 X-64.179 Y-6.45 I.228 J1.73 E.27255 G1 X-63.749 Y-6.522 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.748 Y-6.851 E.0101 G3 X-62.789 Y-7.946 I1.298 J.17 E.04743 G1 X-62.621 Y-7.979 E.00527 G3 X-63.744 Y-6.483 I.171 J1.298 E.18868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.748 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.7 Y-7.964 ;WIPE_END G1 X-55.097 Y-7.283 Z1.2 F30000 G1 X-40.421 Y-5.97 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.463 Y-5.857 E.00399 G3 X-43.008 Y-8.761 I-1.987 J-.825 E.28961 G1 X-42.731 Y-8.816 E.00935 G3 X-40.372 Y-6.123 I.281 J2.134 E.14023 G1 X-40.409 Y-6.008 E.00402 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.806 Y-6.101 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.839 Y-6.013 E.00311 G3 X-42.902 Y-8.367 I-1.611 J-.669 E.23477 G1 X-42.678 Y-8.411 E.00758 G3 X-40.766 Y-6.229 I.228 J1.73 E.11367 G1 X-40.794 Y-6.139 E.00313 G1 X-41.218 Y-6.24 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.241 Y-6.179 E.002 G3 X-42.789 Y-7.946 I-1.209 J-.502 E.16318 G1 X-42.621 Y-7.979 E.00527 G3 X-41.186 Y-6.341 I.171 J1.298 E.07901 G1 X-41.206 Y-6.278 E.00203 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.241 Y-6.179 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.801 Y-5.418 ;WIPE_END G1 X-35.187 Y-5.944 Z1.2 F30000 G1 X-16.24 Y-7.252 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.398 Y-7.252 E.02793 G1 X-15.398 Y-1.748 E.18258 G1 X-20.002 Y-1.748 E.15273 G1 X-20.002 Y-7.252 E.18258 G1 X-16.28 Y-7.252 E.12347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.24 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.805 Y-6.845 E.01443 G1 X-15.805 Y-2.155 E.15558 G1 X-19.595 Y-2.155 E.12572 G1 X-19.595 Y-6.845 E.15558 G1 X-16.28 Y-6.845 E.10996 G1 X-16.24 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-17.216 Y3.162 Z1.2 F30000 G1 X-20.002 Y25.21 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.227 Y29.655 Z1.2 F30000 G1 X-33.18 Y45.342 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.273 Y45.306 E.0033 G3 X-33.008 Y41.239 I.822 J-1.989 E.17758 G1 X-32.731 Y41.184 E.00935 G3 X-33.006 Y45.397 I.281 J2.134 E.25227 G1 X-33.142 Y45.354 E.0047 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.049 Y44.957 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.117 Y44.93 E.00242 G3 X-32.902 Y41.633 I.667 J-1.612 E.14395 G1 X-32.678 Y41.589 E.00758 G3 X-32.901 Y45.003 I.228 J1.73 E.2045 G1 X-33.011 Y44.969 E.00382 G1 X-32.904 Y44.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.951 Y44.53 E.00149 G3 X-32.621 Y42.021 I.504 J-1.21 E.10526 G3 X-32.45 Y44.63 I.168 J1.299 E.13159 G3 X-32.621 Y44.619 I.003 J-1.311 E.00527 G1 X-32.866 Y44.554 E.00778 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.951 Y44.53 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.705 Y42.954 ;WIPE_END G1 X-41.323 Y43.416 Z1.2 F30000 G1 X-73.17 Y45.346 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.273 Y45.306 E.00366 G3 X-73.008 Y41.239 I.822 J-1.989 E.17758 G1 X-72.731 Y41.184 E.00935 G3 X-73.006 Y45.397 I.281 J2.134 E.25227 G1 X-73.132 Y45.358 E.00435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.039 Y44.96 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.117 Y44.93 E.00277 G3 X-72.902 Y41.633 I.667 J-1.612 E.14395 G1 X-72.678 Y41.589 E.00758 G3 X-72.901 Y45.003 I.228 J1.73 E.2045 G1 X-73.001 Y44.972 E.00346 G1 X-72.894 Y44.546 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.95 Y44.528 E.00181 G3 X-72.789 Y42.054 I.5 J-1.21 E.10006 G1 X-72.621 Y42.021 E.00527 G3 X-72.621 Y44.617 I.171 J1.298 E.13688 G1 X-72.856 Y44.556 E.00745 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.95 Y44.528 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.709 Y42.964 ;WIPE_END G1 X-77.867 Y36.564 Z1.2 F30000 G1 X-88.66 Y19.948 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-87.203 Y13.189 Z1.2 F30000 G1 X-88.66 Y-7.252 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y-7.252 E.1248 G1 X-84.898 Y-1.748 E.18258 G1 X-89.502 Y-1.748 E.15273 G1 X-89.502 Y-7.252 E.18258 G1 X-88.7 Y-7.252 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y-6.845 E.11129 G1 X-85.305 Y-2.155 E.15558 G1 X-89.095 Y-2.155 E.12572 G1 X-89.095 Y-6.845 E.15558 G1 X-88.7 Y-6.845 E.0131 G1 X-88.66 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-79.052 Y-7.007 Z1.2 F30000 G1 X-17.443 Y-11.948 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-14.002 Y-8.507 I1.494 J1.947 E.27712 G1 X-14.002 Y49.948 E1.93905 G1 X-15.685 Y49.948 E.05584 G2 X-20.215 Y49.948 I-2.265 J-.945 E.32004 G1 X-84.685 Y49.948 E2.13862 G2 X-89.215 Y49.948 I-2.265 J-.945 E.32013 G1 X-90.898 Y49.948 E.05584 G1 X-90.898 Y-8.507 E1.93905 G2 X-87.457 Y-11.948 I1.944 J-1.497 E.27676 G1 X-84.398 Y-11.948 E.10147 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-17.483 Y-11.948 E.10014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.685 Y-11.735 G1 X-17.897 Y-11.494 G1 X-18.076 Y-11.227 G1 X-18.218 Y-10.939 G1 X-18.321 Y-10.635 G1 X-18.383 Y-10.32 G1 X-18.39 Y-10.219 ;WIPE_END G1 X-15.441 Y-11.981 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.422 Y-11.97 E.0007 G3 X-17.196 Y-11.624 I-.535 J1.972 E.36372 G3 X-16.091 Y-12.037 I1.255 J1.67 E.03968 G3 X-15.684 Y-12.023 I.133 J2.039 E.01353 G1 X-15.48 Y-11.988 E.00686 G1 X-15.535 Y-11.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-16.755 Y-11.395 I-.423 J1.552 E.27171 G3 X-16.062 Y-11.603 I.785 J1.353 E.02244 G3 X-15.573 Y-11.56 I.105 J1.605 E.01513 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.334 Y-11.488 G1 X-15.145 Y-11.395 G1 X-14.97 Y-11.278 G1 X-14.811 Y-11.139 G1 X-14.672 Y-10.98 G1 X-14.555 Y-10.805 G1 X-14.462 Y-10.616 G1 X-14.394 Y-10.417 G1 X-14.353 Y-10.21 G1 X-14.349 Y-10.146 ;WIPE_END G1 X-14.457 Y-11.948 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-14.002 Y-11.948 E.01508 G1 X-14.002 Y-11.493 E.01508 G2 X-14.425 Y-11.923 I-1.955 J1.501 E.02007 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-14.002 Y-11.948 G1 X-14.002 Y-11.493 G1 X-14.215 Y-11.735 G1 X-14.425 Y-11.923 ;WIPE_END G1 X-22.049 Y-11.549 Z1.2 F30000 G1 X-89.955 Y-8.219 Z1.2 G1 Z.8 M73 P12 R95 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-89.974 Y-8.226 E.00068 G3 X-90.196 Y-11.624 I1.017 J-1.772 E.13349 G3 X-89.091 Y-12.037 I1.255 J1.67 E.03968 G3 X-89.733 Y-8.109 I.133 J2.039 E.24373 G1 X-89.919 Y-8.201 E.00688 G1 X-89.757 Y-8.603 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-89.755 Y-11.395 I.799 J-1.396 E.1039 G3 X-89.062 Y-11.603 I.785 J1.353 E.02244 G3 X-89.722 Y-8.583 I.105 J1.605 E.18295 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-89.93 Y-8.722 G1 X-90.089 Y-8.861 G1 X-90.228 Y-9.02 G1 X-90.345 Y-9.195 G1 X-90.438 Y-9.384 G1 X-90.506 Y-9.583 G1 X-90.547 Y-9.79 G1 X-90.56 Y-10 G1 X-90.547 Y-10.21 G1 X-90.534 Y-10.273 ;WIPE_END G1 X-90.898 Y-11.493 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-90.898 Y-11.948 E.01508 G1 X-90.443 Y-11.948 E.01508 G1 X-90.685 Y-11.735 E.01069 G1 X-90.872 Y-11.523 E.00936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-90.898 Y-11.948 G1 X-90.443 Y-11.948 G1 X-90.685 Y-11.735 G1 X-90.872 Y-11.523 ;WIPE_END G1 X-83.24 Y-11.612 Z1.2 F30000 G1 X-19.66 Y-12.355 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-13.595 Y-12.355 E.20119 G1 X-13.595 Y50.355 E2.08021 G1 X-16.399 Y50.355 E.09303 G2 X-16.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-19.722 Y50.023 I-1.444 J1.451 E.19522 G1 X-19.501 Y50.355 E.01324 G1 X-85.399 Y50.355 E2.18599 G2 X-85.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-88.722 Y50.023 I-1.444 J1.451 E.19522 G1 X-88.501 Y50.355 E.01324 G1 X-91.305 Y50.355 E.09303 G1 X-91.305 Y-12.355 E2.08021 G1 X-84.805 Y-12.355 E.21562 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-19.7 Y-12.355 E.0131 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.7 Y-12.355 ;WIPE_END G1 X-17.902 Y-4.725 Z1.2 F30000 G1 X-19.343 Y49.808 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.348 Y49.807 E.00017 G3 X-18.755 Y47.605 I1.391 J-.806 E.0779 G3 X-18.062 Y47.397 I.785 J1.353 E.02244 G3 X-19.231 Y49.983 I.104 J1.604 E.20353 G1 X-19.321 Y49.841 E.00516 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.348 Y49.807 G1 X-19.438 Y49.616 G1 X-19.506 Y49.417 G1 X-19.547 Y49.21 G1 X-19.56 Y49 G1 X-19.547 Y48.79 G1 X-19.506 Y48.583 G1 X-19.438 Y48.384 G1 X-19.345 Y48.195 G1 X-19.228 Y48.02 G1 X-19.188 Y47.974 ;WIPE_END G1 X-26.818 Y48.178 Z1.2 F30000 G1 X-88.337 Y49.816 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-88.35 Y49.808 E.00046 G3 X-87.755 Y47.605 I1.393 J-.806 E.07793 G3 X-87.062 Y47.397 I.785 J1.353 E.02244 G3 X-88.232 Y49.984 I.105 J1.606 E.20377 G1 X-88.316 Y49.85 E.00485 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-88.35 Y49.808 G1 X-88.438 Y49.616 G1 X-88.506 Y49.417 G1 X-88.547 Y49.21 G1 X-88.56 Y49 G1 X-88.547 Y48.79 G1 X-88.506 Y48.583 G1 X-88.438 Y48.384 G1 X-88.345 Y48.195 G1 X-88.228 Y48.02 G1 X-88.195 Y47.982 ;WIPE_END G1 X-82.484 Y42.918 Z1.2 F30000 G1 X-19.66 Y-12.79 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-91.74 Y50.79 E2.41454 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-15.769 Y-5.423 Z1.2 F30000 G1 X-14.947 Y-2.211 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537302 G1 F15000 G3 X-14.656 Y-2.439 I.509 J.349 E.01512 G1 X-14.453 Y-2.375 E.0086 G1 X-14.453 Y-7.487 E.20595 G1 X-14.947 Y-7.291 E.02142 G1 X-14.947 Y-2.251 E.20306 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.947 Y-4.251 ;WIPE_END G1 X-18.497 Y-7.644 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419416 G1 F15000 G1 X-17.517 Y-7.644 E.03008 G1 X-17.701 Y-7.758 E.00665 G1 X-18.043 Y-8.098 E.0148 G1 X-18.469 Y-7.672 E.01848 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-18.043 Y-8.098 G1 X-17.701 Y-7.758 G1 X-17.517 Y-7.644 G1 X-18.215 Y-7.644 ;WIPE_END G1 X-17.176 Y-.082 Z1.2 F30000 G1 X-14.453 Y19.744 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.542628 G1 F15000 G1 X-14.471 Y18.835 E.03702 G1 X-15.144 Y19.508 E.03874 G1 X-14.947 Y19.621 E.00922 G1 X-14.947 Y25.519 E.24019 G3 X-14.691 Y25.357 I.333 J.244 E.01262 G1 X-14.453 Y25.485 E.01102 G1 X-14.453 Y19.784 E.23212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.76 Y49.19 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397572 G1 F15000 G2 X-14.767 Y48.547 I-4.887 J-.268 E.0186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.402 Y46.938 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537286 G1 F15000 G1 X-14.953 Y47.671 E.03462 G1 X-14.891 Y47.821 E.00656 ;WIDTH:0.517204 G1 X-14.851 Y48.05 E.00897 ;WIDTH:0.477039 G1 X-14.81 Y48.278 E.00821 ;WIDTH:0.436875 G1 X-14.77 Y48.507 E.00745 G1 X-14.79 Y48.276 E.00745 ;WIDTH:0.477039 G1 X-14.81 Y48.044 E.00821 ;WIDTH:0.533479 G1 X-14.83 Y47.813 E.00928 G1 X-14.83 Y46.365 E.05787 G1 X-15.374 Y46.909 E.03076 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.016 Y46.936 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-15.668 Y47.304 E.01556 G1 X-15.331 Y47.888 E.02075 G1 X-15.132 Y48.604 E.02282 G3 X-15.167 Y49.556 I-3.859 J.335 E.02933 G1 X-14.394 Y49.556 E.02375 G1 X-14.394 Y45.313 E.13036 G1 X-15.988 Y46.907 E.06926 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.574 Y45.493 ;WIPE_END G1 X-20.716 Y49.501 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.443642 G1 F15000 G2 X-20.711 Y49.579 I-.023 J.041 E.00654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.617 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420288 G1 F15000 G1 X-20.412 Y48.716 E.05241 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-21.617 Y49.922 ;WIPE_END G1 X-16.532 Y46.971 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-14.198 Y44.637 E.10148 G1 X-14.198 Y44.531 E.00327 G1 X-14.216 Y44.513 E.00076 G1 X-14.216 Y44.121 E.01206 G1 X-16.741 Y46.647 E.10984 G2 X-17.118 Y46.489 I-.786 J1.349 E.01258 G1 X-14.216 Y43.587 E.1262 G1 X-14.216 Y43.054 E.01641 G1 X-17.546 Y46.384 E.14481 G2 X-18.052 Y46.356 I-.422 J3.07 E.0156 G1 X-14.216 Y42.52 E.16682 G1 X-14.216 Y41.986 E.01641 G1 X-18.686 Y46.456 E.1944 G2 X-20.494 Y48.264 I.718 J2.526 E.08211 G1 X-21.981 Y49.752 E.0647 G1 X-22.515 Y49.752 E.01641 G1 X-14.216 Y41.453 E.36092 G1 X-14.216 Y40.919 E.01641 G1 X-23.049 Y49.752 E.38413 G1 X-23.582 Y49.752 E.01641 G1 X-14.216 Y40.385 E.40734 G1 X-14.216 Y39.852 E.01641 G1 X-24.116 Y49.752 E.43055 G1 X-24.65 Y49.752 E.01641 G1 X-14.216 Y39.318 E.45376 G1 X-14.216 Y38.784 E.01641 G1 X-25.183 Y49.752 E.47697 G1 X-25.717 Y49.752 E.01641 G1 X-14.216 Y38.25 E.50017 G1 X-14.216 Y37.717 E.01641 G1 X-26.251 Y49.752 E.52338 G1 X-26.784 Y49.752 E.01641 G1 X-14.216 Y37.183 E.54659 G1 X-14.216 Y36.649 E.01641 G1 X-27.318 Y49.752 E.5698 G1 X-27.852 Y49.752 E.01641 G1 X-14.216 Y36.116 E.59301 G1 X-14.216 Y35.582 E.01641 G1 X-28.385 Y49.752 E.61622 G1 X-28.919 Y49.752 E.01641 G1 X-14.216 Y35.048 E.63943 G1 X-14.216 Y34.515 E.01641 G1 X-29.453 Y49.752 E.66264 G1 X-29.986 Y49.752 E.01641 G1 X-14.216 Y33.981 E.68584 G1 X-14.216 Y33.447 E.01641 G1 X-30.52 Y49.752 E.70905 G1 X-31.054 Y49.752 E.01641 G1 X-14.216 Y32.914 E.73226 G1 X-14.216 Y32.38 E.01641 G1 X-31.587 Y49.752 E.75547 G1 X-32.121 Y49.752 E.01641 G1 X-14.216 Y31.846 E.77868 G1 X-14.216 Y31.313 E.01641 G1 X-32.655 Y49.752 E.80189 G1 X-33.189 Y49.752 E.01641 G1 X-14.216 Y30.779 E.8251 G1 X-14.216 Y30.245 E.01641 G1 X-33.722 Y49.752 E.8483 G1 X-34.256 Y49.752 E.01641 G1 X-14.216 Y29.712 E.87151 G1 X-14.216 Y29.178 E.01641 G1 X-34.79 Y49.752 E.89472 G1 X-35.323 Y49.752 E.01641 G1 X-14.216 Y28.644 E.91793 G1 X-14.216 Y28.111 E.01641 G1 X-30.254 Y44.149 E.69749 G3 X-31.621 Y45.516 I-2.164 J-.797 E.06132 G1 X-35.857 Y49.752 E.18422 G1 X-36.391 Y49.752 E.01641 G1 X-32.3 Y45.661 E.17791 G3 X-32.812 Y45.64 I-.15 J-2.568 E.0158 G1 X-36.924 Y49.752 E.17883 G1 X-37.458 Y49.752 E.01641 G1 X-33.236 Y45.53 E.18359 G3 X-33.605 Y45.366 I.441 J-1.484 E.01246 G1 X-37.992 Y49.752 E.19075 G1 X-38.525 Y49.752 E.01641 G1 X-33.922 Y45.149 E.20018 G3 X-34.195 Y44.888 I.855 J-1.166 E.01164 G1 X-39.059 Y49.752 E.21153 G1 X-39.593 Y49.752 E.01641 G1 X-34.426 Y44.585 E.22469 G3 X-34.613 Y44.238 I1.224 J-.883 E.01215 G1 X-40.126 Y49.752 E.23978 G1 X-40.66 Y49.752 E.01641 G1 X-34.74 Y43.832 E.25746 G3 X-34.798 Y43.357 I1.776 J-.46 E.01477 G1 X-41.363 Y49.922 E.2855 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.299 Y43.66 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-14.216 Y27.577 E.69944 G1 X-14.216 Y27.043 E.01641 G1 X-30.13 Y42.958 E.6921 G2 X-30.24 Y42.534 I-1.666 J.203 E.01351 G1 X-14.216 Y26.51 E.69686 G1 X-14.216 Y25.976 E.01641 G1 X-30.404 Y42.165 E.70402 G2 X-30.621 Y41.848 I-3.219 J1.97 E.01181 G1 X-14.637 Y25.864 E.69512 G1 X-14.683 Y25.818 E.00199 G1 X-15.327 Y26.461 E.02799 G1 X-15.522 Y26.266 E.00851 G1 X-15.573 Y26.266 E.00155 G1 X-30.882 Y41.575 E.66578 G2 X-31.185 Y41.344 I-1.028 J1.034 E.01174 G1 X-16.106 Y26.266 E.65573 G1 X-16.64 Y26.266 E.01641 G1 X-31.532 Y41.157 E.64761 G2 X-31.938 Y41.03 I-1.157 J2.981 E.01311 G1 X-17.174 Y26.266 E.64208 G1 X-17.707 Y26.266 E.01641 G1 X-32.59 Y41.148 E.64723 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.071 Y26.096 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-33.016 Y41.041 E.64993 G2 X-34.729 Y42.754 I.554 J2.266 E.0783 G1 X-41.727 Y49.752 E.30435 G1 X-42.261 Y49.752 E.01641 G1 X-18.775 Y26.266 E1.02137 G1 X-19.308 Y26.266 E.01641 G1 X-42.795 Y49.752 E1.02137 G1 X-43.328 Y49.752 E.01641 G1 X-19.825 Y26.248 E1.02213 G1 X-20.198 Y26.248 E.01148 G1 X-20.198 Y26.088 E.00493 G1 X-43.862 Y49.752 E1.0291 G1 X-44.396 Y49.752 E.01641 G1 X-20.198 Y25.554 E1.05231 G1 X-20.198 Y25.021 E.01641 G1 X-44.929 Y49.752 E1.07552 G1 X-45.463 Y49.752 E.01641 G1 X-20.198 Y24.487 E1.09873 G1 X-20.198 Y23.953 E.01641 G1 X-45.997 Y49.752 E1.12194 G1 X-46.531 Y49.752 E.01641 G1 X-20.198 Y23.419 E1.14515 G1 X-20.198 Y22.886 E.01641 G1 X-47.064 Y49.752 E1.16835 G1 X-47.598 Y49.752 E.01641 G1 X-20.198 Y22.352 E1.19156 G1 X-20.198 Y21.818 E.01641 G1 X-48.132 Y49.752 E1.21477 G1 X-48.665 Y49.752 E.01641 G1 X-20.198 Y21.285 E1.23798 G1 X-20.198 Y20.751 E.01641 G1 X-31.202 Y31.755 E.47853 G1 X-31.202 Y32.248 E.01517 G1 X-31.695 Y32.248 E.01517 G1 X-49.199 Y49.752 E.76121 G1 X-49.733 Y49.752 E.01641 G1 X-32.229 Y32.248 E.76121 G1 X-32.762 Y32.248 E.01641 G1 X-50.266 Y49.752 E.76121 G1 X-50.8 Y49.752 E.01641 G1 X-33.296 Y32.248 E.76121 G1 X-33.83 Y32.248 E.01641 G1 X-51.334 Y49.752 E.76121 G1 X-51.867 Y49.752 E.01641 G1 X-34.364 Y32.248 E.76121 G1 X-34.897 Y32.248 E.01641 G1 X-52.401 Y49.752 E.76121 G1 X-52.935 Y49.752 E.01641 G1 X-35.431 Y32.248 E.76121 G1 X-35.965 Y32.248 E.01641 G1 X-53.468 Y49.752 E.76121 G1 X-54.002 Y49.752 E.01641 G1 X-36.498 Y32.248 E.76121 G1 X-37.032 Y32.248 E.01641 G1 X-54.536 Y49.752 E.76121 G1 X-55.069 Y49.752 E.01641 G1 X-37.566 Y32.248 E.76121 G1 X-38.099 Y32.248 E.01641 G1 X-55.603 Y49.752 E.76121 G1 X-56.137 Y49.752 E.01641 G1 X-38.633 Y32.248 E.76121 G1 X-39.167 Y32.248 E.01641 G1 X-56.67 Y49.752 E.76121 G1 X-57.204 Y49.752 E.01641 G1 X-39.7 Y32.248 E.76121 G1 X-40.234 Y32.248 E.01641 G1 X-57.738 Y49.752 E.76121 G1 X-58.271 Y49.752 E.01641 G1 X-40.768 Y32.248 E.76121 G1 X-41.301 Y32.248 E.01641 G1 X-58.805 Y49.752 E.76121 G1 X-59.339 Y49.752 E.01641 G1 X-41.835 Y32.248 E.76121 G1 X-42.369 Y32.248 E.01641 G1 X-59.872 Y49.752 E.76121 G1 X-60.406 Y49.752 E.01641 G1 X-42.902 Y32.248 E.76121 G1 X-43.436 Y32.248 E.01641 G1 X-60.94 Y49.752 E.76121 G1 X-61.474 Y49.752 E.01641 G1 X-43.97 Y32.248 E.76121 G1 X-44.503 Y32.248 E.01641 G1 X-62.007 Y49.752 E.76121 G1 X-62.541 Y49.752 E.01641 G1 X-45.037 Y32.248 E.76121 G1 X-45.571 Y32.248 E.01641 G1 X-63.075 Y49.752 E.76121 G1 X-63.608 Y49.752 E.01641 G1 X-46.104 Y32.248 E.76121 G1 X-46.638 Y32.248 E.01641 G1 X-64.142 Y49.752 E.76121 G1 X-64.676 Y49.752 E.01641 G1 X-47.172 Y32.248 E.76121 G1 X-47.705 Y32.248 E.01641 G1 X-65.209 Y49.752 E.76121 G1 X-65.743 Y49.752 E.01641 G1 X-48.239 Y32.248 E.76121 G1 X-48.773 Y32.248 E.01641 G1 X-66.277 Y49.752 E.76121 G1 X-66.81 Y49.752 E.01641 G1 X-49.307 Y32.248 E.76121 G1 X-49.84 Y32.248 E.01641 G1 X-67.344 Y49.752 E.76121 G1 X-67.878 Y49.752 E.01641 G1 X-50.374 Y32.248 E.76121 G1 X-50.908 Y32.248 E.01641 G1 X-68.411 Y49.752 E.76121 G1 X-68.945 Y49.752 E.01641 G1 X-51.441 Y32.248 E.76121 G1 X-51.975 Y32.248 E.01641 G1 X-69.479 Y49.752 E.76121 G1 X-70.012 Y49.752 E.01641 G1 X-52.509 Y32.248 E.76121 G1 X-53.042 Y32.248 E.01641 G1 X-70.546 Y49.752 E.76121 G1 X-71.08 Y49.752 E.01641 G1 X-53.576 Y32.248 E.76121 G1 X-54.11 Y32.248 E.01641 G1 X-71.613 Y49.752 E.76121 G1 X-72.147 Y49.752 E.01641 G1 X-54.643 Y32.248 E.76121 G1 X-55.177 Y32.248 E.01641 G1 X-72.681 Y49.752 E.76121 G1 X-73.214 Y49.752 E.01641 G1 X-55.711 Y32.248 E.76121 G1 X-56.244 Y32.248 E.01641 G1 X-73.748 Y49.752 E.76121 G1 X-74.282 Y49.752 E.01641 G1 X-56.778 Y32.248 E.76121 G1 X-57.312 Y32.248 E.01641 G1 X-74.816 Y49.752 E.76121 G1 X-75.349 Y49.752 E.01641 G1 X-57.845 Y32.248 E.76121 G1 X-58.379 Y32.248 E.01641 G1 X-70.241 Y44.11 E.51585 G3 X-71.66 Y45.529 I-2.172 J-.753 E.06386 G1 X-75.883 Y49.752 E.18364 G1 X-76.417 Y49.752 E.01641 G1 X-72.327 Y45.663 E.17783 G3 X-72.834 Y45.635 I-.12 J-2.48 E.01562 G1 X-76.95 Y49.752 E.17902 G1 X-77.484 Y49.752 E.01641 G1 X-73.256 Y45.524 E.18388 G3 X-73.623 Y45.357 I.449 J-1.478 E.01243 G1 X-78.018 Y49.752 E.19112 G1 X-78.551 Y49.752 E.01641 G1 X-73.936 Y45.137 E.2007 G3 X-74.207 Y44.874 I.862 J-1.161 E.01164 G1 X-79.085 Y49.752 E.21213 G1 X-79.619 Y49.752 E.01641 G1 X-74.436 Y44.57 E.22537 G3 X-74.621 Y44.221 I1.231 J-.877 E.01217 G1 X-80.152 Y49.752 E.24054 G1 X-80.686 Y49.752 E.01641 G1 X-74.744 Y43.81 E.2584 G3 X-74.8 Y43.332 I1.788 J-.451 E.01484 G1 X-81.389 Y49.922 E.28656 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-79.975 Y48.507 ;WIPE_END G1 X-87.604 Y48.279 Z1.2 F30000 G1 X-89.302 Y48.228 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.688 Y49.614 E.06027 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-89.302 Y48.228 ;WIPE_END G1 X-81.884 Y46.433 Z1.2 F30000 G1 X-70.293 Y43.628 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-58.913 Y32.248 E.49489 G1 X-59.446 Y32.248 E.01641 G1 X-70.135 Y42.936 E.46481 G2 X-70.246 Y42.514 I-1.659 J.213 E.01346 G1 X-59.98 Y32.248 E.44646 G1 X-60.514 Y32.248 E.01641 G1 X-70.413 Y42.147 E.43049 G2 X-70.633 Y41.834 I-3.62 J2.312 E.01178 G1 X-61.047 Y32.248 E.41687 G1 X-61.581 Y32.248 E.01641 G1 X-70.896 Y41.563 E.40508 G2 X-71.2 Y41.334 I-1.023 J1.042 E.01175 G1 X-62.115 Y32.248 E.39512 G1 X-62.649 Y32.248 E.01641 G1 X-71.55 Y41.148 E.38709 G2 X-71.96 Y41.026 I-.67 J1.494 E.01318 G1 X-63.182 Y32.248 E.38172 G1 X-63.716 Y32.248 E.01641 G1 X-72.618 Y41.15 E.38714 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.08 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-73.049 Y41.047 E.39004 G2 X-74.723 Y42.721 I.595 J2.269 E.07629 G1 X-81.753 Y49.752 E.30575 G1 X-82.287 Y49.752 E.01641 G1 X-64.783 Y32.248 E.76121 G1 X-65.317 Y32.248 E.01641 G1 X-82.821 Y49.752 E.76121 G1 X-83.354 Y49.752 E.01641 G1 X-65.851 Y32.248 E.76121 G1 X-66.384 Y32.248 E.01641 G1 X-83.888 Y49.752 E.76121 G1 X-84.412 Y49.752 E.01611 G1 X-66.918 Y32.248 E.76099 G1 X-67.452 Y32.248 E.01641 G1 X-84.306 Y49.102 E.73296 G2 X-84.333 Y48.596 I-3.099 J-.086 E.01561 G1 X-67.985 Y32.248 E.71095 G1 X-68.519 Y32.248 E.01641 G1 X-84.439 Y48.168 E.69233 G2 X-84.596 Y47.792 I-1.508 J.41 E.01258 G1 X-69.053 Y32.248 E.67597 G1 X-69.586 Y32.248 E.01641 G1 X-84.798 Y47.46 E.66152 G2 X-85.039 Y47.167 I-1.231 J.77 E.01169 G1 X-70.12 Y32.248 E.6488 G1 X-70.654 Y32.248 E.01641 G1 X-85.318 Y46.913 E.63774 G2 X-85.637 Y46.698 I-4.332 J6.093 E.01183 G1 X-71.187 Y32.248 E.6284 G1 X-71.721 Y32.248 E.01641 G1 X-86.002 Y46.529 E.62103 G2 X-86.416 Y46.409 I-.66 J1.514 E.0133 G1 X-72.255 Y32.248 E.61584 G1 X-72.788 Y32.248 E.01641 G1 X-86.893 Y46.353 E.61339 G2 X-87.483 Y46.409 I-.018 J2.941 E.01825 G1 X-73.322 Y32.248 E.61583 G1 X-73.698 Y32.248 E.01156 G1 X-73.698 Y32.09 E.00485 G1 X-90.702 Y49.094 E.73946 G1 X-90.702 Y48.561 E.01641 G1 X-73.698 Y31.557 E.73946 G1 X-73.698 Y31.023 E.01641 G1 X-90.702 Y48.027 E.73946 G1 X-90.702 Y47.493 E.01641 G1 X-73.698 Y30.489 E.73946 G1 X-73.698 Y29.956 E.01641 G1 X-90.702 Y46.96 E.73946 G1 X-90.702 Y46.426 E.01641 G1 X-73.698 Y29.422 E.73946 G1 X-73.698 Y28.888 E.01641 G1 X-90.702 Y45.892 E.73946 G1 X-90.702 Y45.358 E.01641 G1 X-73.698 Y28.355 E.73946 G1 X-73.698 Y27.821 E.01641 G1 X-90.702 Y44.825 E.73946 G1 X-90.702 Y44.291 E.01641 G1 X-73.698 Y27.287 E.73946 G1 X-73.698 Y26.754 E.01641 G1 X-90.702 Y43.757 E.73946 G1 X-90.702 Y43.224 E.01641 G1 X-73.698 Y26.22 E.73946 G1 X-73.698 Y25.686 E.01641 G1 X-90.702 Y42.69 E.73946 G1 X-90.702 Y42.156 E.01641 G1 X-73.698 Y25.153 E.73946 G1 X-73.698 Y24.619 E.01641 G1 X-90.702 Y41.623 E.73946 G1 X-90.702 Y41.089 E.01641 G1 X-73.698 Y24.085 E.73946 G1 X-73.698 Y23.552 E.01641 G1 X-90.702 Y40.555 E.73946 G1 X-90.702 Y40.022 E.01641 M73 P13 R95 G1 X-73.698 Y23.018 E.73946 G1 X-73.698 Y22.484 E.01641 G1 X-90.702 Y39.488 E.73946 G1 X-90.702 Y38.954 E.01641 G1 X-73.698 Y21.951 E.73946 G1 X-73.698 Y21.417 E.01641 G1 X-90.702 Y38.421 E.73946 G1 X-90.702 Y37.887 E.01641 G1 X-73.698 Y20.883 E.73946 G1 X-73.698 Y20.35 E.01641 G1 X-90.702 Y37.353 E.73946 G1 X-90.702 Y36.82 E.01641 G1 X-73.698 Y19.816 E.73946 G1 X-73.698 Y19.282 E.01641 G1 X-90.702 Y36.286 E.73946 G1 X-90.702 Y35.752 E.01641 G1 X-73.698 Y18.748 E.73946 G1 X-73.698 Y18.215 E.01641 G1 X-90.702 Y35.219 E.73946 G1 X-90.702 Y34.685 E.01641 G1 X-73.698 Y17.681 E.73946 G1 X-73.698 Y17.147 E.01641 G1 X-90.702 Y34.151 E.73946 G1 X-90.702 Y33.618 E.01641 G1 X-73.698 Y16.614 E.73946 G1 X-73.698 Y16.08 E.01641 G1 X-90.702 Y33.084 E.73946 G1 X-90.702 Y32.55 E.01641 G1 X-73.698 Y15.546 E.73946 G1 X-73.698 Y15.013 E.01641 G1 X-90.702 Y32.017 E.73946 G1 X-90.702 Y31.483 E.01641 G1 X-85.467 Y26.248 E.22765 G1 X-86.001 Y26.248 E.01641 G1 X-90.702 Y30.949 E.20444 G1 X-90.702 Y30.415 E.01641 G1 X-86.535 Y26.248 E.18123 G1 X-87.068 Y26.248 E.01641 G1 X-90.702 Y29.882 E.15802 G1 X-90.702 Y29.348 E.01641 G1 X-87.432 Y26.078 E.14219 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y25.653 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-73.698 Y14.479 E.48591 G1 X-73.698 Y13.945 E.01641 G1 X-84.702 Y24.949 E.47853 G1 X-84.702 Y24.415 E.01641 G1 X-73.698 Y13.412 E.47853 G1 X-73.698 Y12.878 E.01641 G1 X-84.702 Y23.882 E.47853 G1 X-84.702 Y23.348 E.01641 G1 X-73.698 Y12.344 E.47853 G1 X-73.698 Y11.811 E.01641 G1 X-84.702 Y22.814 E.47853 G1 X-84.702 Y22.281 E.01641 G1 X-73.698 Y11.277 E.47853 G1 X-73.698 Y10.743 E.01641 G1 X-84.702 Y21.747 E.47853 G1 X-84.702 Y21.213 E.01641 G1 X-73.698 Y10.21 E.47853 G1 X-73.698 Y9.676 E.01641 G1 X-84.702 Y20.68 E.47853 G1 X-84.702 Y20.146 E.01641 G1 X-73.698 Y9.142 E.47853 G1 X-73.698 Y8.609 E.01641 G1 X-85.011 Y19.922 E.49198 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-83.597 Y18.507 ;WIPE_END G1 X-75.966 Y18.667 Z1.2 F30000 G1 X-16.167 Y19.922 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-14.198 Y17.953 E.0856 G1 X-14.198 Y17.867 E.00264 G1 X-14.216 Y17.85 E.00076 G1 X-14.216 Y17.437 E.01269 G1 X-16.531 Y19.752 E.10067 G1 X-17.064 Y19.752 E.01641 G1 X-14.216 Y16.903 E.12388 G1 X-14.216 Y16.37 E.01641 G1 X-17.598 Y19.752 E.14709 G1 X-18.132 Y19.752 E.01641 G1 X-14.216 Y15.836 E.1703 G1 X-14.216 Y15.302 E.01641 G1 X-18.665 Y19.752 E.19351 G1 X-19.199 Y19.752 E.01641 G1 X-14.216 Y14.769 E.21671 G1 X-14.216 Y14.235 E.01641 G1 X-19.733 Y19.752 E.23992 G1 X-20.198 Y19.752 E.01432 G1 X-20.198 Y20.217 E.01432 G1 X-31.202 Y31.221 E.47853 G1 X-31.202 Y30.688 E.01641 G1 X-14.216 Y13.701 E.7387 G1 X-14.216 Y13.168 E.01641 G1 X-31.202 Y30.154 E.7387 G1 X-31.202 Y29.62 E.01641 G1 X-14.216 Y12.634 E.7387 G1 X-14.216 Y12.1 E.01641 G1 X-31.202 Y29.086 E.7387 G1 X-31.202 Y28.553 E.01641 G1 X-14.216 Y11.567 E.7387 G1 X-14.216 Y11.033 E.01641 G1 X-31.202 Y28.019 E.7387 G1 X-31.202 Y27.485 E.01641 G1 X-14.216 Y10.499 E.7387 G1 X-14.216 Y9.965 E.01641 G1 X-31.202 Y26.952 E.7387 G1 X-31.202 Y26.418 E.01641 G1 X-14.216 Y9.432 E.7387 G1 X-14.216 Y8.898 E.01641 G1 X-31.202 Y25.884 E.7387 G1 X-31.202 Y25.351 E.01641 G1 X-14.216 Y8.364 E.7387 G1 X-14.216 Y7.831 E.01641 G1 X-31.202 Y24.817 E.7387 G1 X-31.202 Y24.283 E.01641 G1 X-14.216 Y7.297 E.7387 G1 X-14.216 Y6.763 E.01641 G1 X-31.202 Y23.75 E.7387 G1 X-31.202 Y23.216 E.01641 G1 X-14.216 Y6.23 E.7387 G1 X-14.216 Y5.696 E.01641 G1 X-31.202 Y22.682 E.7387 G1 X-31.202 Y22.149 E.01641 G1 X-14.216 Y5.162 E.7387 G1 X-14.216 Y4.629 E.01641 G1 X-31.202 Y21.615 E.7387 G1 X-31.202 Y21.081 E.01641 G1 X-14.216 Y4.095 E.7387 G1 X-14.216 Y3.561 E.01641 G1 X-31.202 Y20.548 E.7387 G1 X-31.202 Y20.014 E.01641 G1 X-14.216 Y3.028 E.7387 G1 X-14.216 Y2.494 E.01641 G1 X-31.202 Y19.48 E.7387 G1 X-31.202 Y18.947 E.01641 G1 X-14.216 Y1.96 E.7387 G1 X-14.216 Y1.427 E.01641 G1 X-31.202 Y18.413 E.7387 G1 X-31.202 Y17.879 E.01641 G1 X-14.216 Y.893 E.7387 G1 X-14.216 Y.359 E.01641 G1 X-31.202 Y17.346 E.7387 G1 X-31.202 Y16.812 E.01641 G1 X-14.216 Y-.174 E.7387 G1 X-14.216 Y-.708 E.01641 G1 X-31.202 Y16.278 E.7387 G1 X-31.202 Y15.745 E.01641 G1 X-14.216 Y-1.242 E.7387 G1 X-14.216 Y-1.775 E.01641 G1 X-31.202 Y15.211 E.7387 G1 X-31.202 Y14.677 E.01641 G1 X-14.578 Y-1.947 E.72296 G1 X-14.613 Y-1.982 E.00153 G1 X-15.257 Y-1.339 E.02799 G1 X-15.452 Y-1.534 E.00851 G1 X-15.524 Y-1.534 E.0022 G1 X-31.202 Y14.143 E.6818 G1 X-31.202 Y13.61 E.01641 G1 X-16.058 Y-1.534 E.65859 G1 X-16.591 Y-1.534 E.01641 G1 X-31.202 Y13.076 E.63538 G1 X-31.202 Y12.542 E.01641 G1 X-17.125 Y-1.534 E.61217 G1 X-17.659 Y-1.534 E.01641 G1 X-31.202 Y12.009 E.58897 G1 X-31.202 Y11.475 E.01641 G1 X-18.192 Y-1.534 E.56576 G1 X-18.726 Y-1.534 E.01641 G1 X-31.202 Y10.941 E.54255 G1 X-31.202 Y10.408 E.01641 G1 X-19.26 Y-1.534 E.51934 G1 X-19.679 Y-1.534 E.01288 G2 X-19.776 Y-1.552 I-.077 J.151 E.00309 G1 X-31.202 Y9.874 E.49689 G1 X-31.202 Y9.34 E.01641 G1 X-20.198 Y-1.663 E.47853 G1 X-20.198 Y-2.197 E.01641 G1 X-31.202 Y8.807 E.47853 G1 X-31.202 Y8.273 E.01641 G1 X-20.198 Y-2.731 E.47853 G1 X-20.198 Y-3.264 E.01641 G1 X-31.214 Y7.752 E.47908 G1 X-31.748 Y7.752 E.01641 G1 X-20.198 Y-3.798 E.50229 G1 X-20.198 Y-4.332 E.01641 G1 X-32.282 Y7.752 E.5255 G1 X-32.815 Y7.752 E.01641 G1 X-20.198 Y-4.865 E.54871 G1 X-20.198 Y-5.399 E.01641 G1 X-33.349 Y7.752 E.57191 G1 X-33.883 Y7.752 E.01641 G1 X-20.198 Y-5.933 E.59512 G1 X-20.198 Y-6.467 E.01641 G1 X-34.586 Y7.922 E.62571 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.386 Y-7.278 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-18.143 Y-8.521 E.05405 G3 X-18.337 Y-8.861 I1.192 J-.907 E.01206 G1 X-19.75 Y-7.448 E.06144 G1 X-20.198 Y-7.448 E.01377 G1 X-20.198 Y-7 E.01377 G1 X-34.95 Y7.752 E.64154 G1 X-35.484 Y7.752 E.01641 G1 X-18.487 Y-9.245 E.73916 G3 X-18.58 Y-9.685 I3.695 J-1.011 E.01385 G1 X-36.018 Y7.752 E.75832 G1 X-36.551 Y7.752 E.01641 G1 X-18.587 Y-10.212 E.78124 G3 X-18.44 Y-10.893 I2.676 J.22 E.02146 G1 X-37.085 Y7.752 E.81082 G1 X-37.619 Y7.752 E.01641 G1 X-18.115 Y-11.752 E.84818 G1 X-18.648 Y-11.752 E.01641 G1 X-38.152 Y7.752 E.84818 G1 X-38.686 Y7.752 E.01641 G1 X-19.182 Y-11.752 E.84818 G1 X-19.716 Y-11.752 E.01641 G1 X-39.22 Y7.752 E.84818 G1 X-39.753 Y7.752 E.01641 G1 X-20.25 Y-11.752 E.84818 G1 X-20.698 Y-11.752 E.01379 G1 X-20.698 Y-11.837 E.00262 G1 X-40.287 Y7.752 E.85188 G1 X-40.821 Y7.752 E.01641 G1 X-20.698 Y-12.371 E.87509 G1 X-20.698 Y-12.904 E.01641 G1 X-41.354 Y7.752 E.8983 G1 X-41.888 Y7.752 E.01641 G1 X-20.698 Y-13.438 E.92151 G1 X-20.698 Y-13.972 E.01641 G1 X-42.422 Y7.752 E.94472 G1 X-42.955 Y7.752 E.01641 G1 X-20.698 Y-14.505 E.96793 G1 X-20.698 Y-15.039 E.01641 G1 X-43.489 Y7.752 E.99114 G1 X-44.023 Y7.752 E.01641 G1 X-20.698 Y-15.573 E1.01434 G1 X-20.698 Y-16.106 E.01641 G1 X-44.556 Y7.752 E1.03755 G1 X-45.09 Y7.752 E.01641 G1 X-20.698 Y-16.64 E1.06076 G1 X-20.698 Y-17.174 E.01641 G1 X-45.624 Y7.752 E1.08397 G1 X-46.157 Y7.752 E.01641 G1 X-20.698 Y-17.707 E1.10718 G1 X-20.698 Y-18.241 E.01641 G1 X-46.691 Y7.752 E1.13039 G1 X-47.225 Y7.752 E.01641 G1 X-20.698 Y-18.775 E1.1536 G1 X-20.698 Y-19.308 E.01641 G1 X-47.759 Y7.752 E1.1768 G1 X-48.292 Y7.752 E.01641 G1 X-20.698 Y-19.842 E1.20001 G1 X-20.698 Y-20.376 E.01641 G1 X-48.826 Y7.752 E1.22322 G1 X-49.36 Y7.752 E.01641 G1 X-20.698 Y-20.91 E1.24643 G1 X-20.698 Y-21.443 E.01641 G1 X-49.893 Y7.752 E1.26964 G1 X-50.427 Y7.752 E.01641 G1 X-20.698 Y-21.977 E1.29285 G1 X-20.698 Y-22.511 E.01641 G1 X-50.961 Y7.752 E1.31606 G1 X-51.494 Y7.752 E.01641 G1 X-20.698 Y-23.044 E1.33927 G1 X-20.698 Y-23.578 E.01641 G1 X-52.028 Y7.752 E1.36247 G1 X-52.562 Y7.752 E.01641 G1 X-20.698 Y-24.112 E1.38568 G1 X-20.698 Y-24.645 E.01641 G1 X-53.095 Y7.752 E1.40889 G1 X-53.629 Y7.752 E.01641 G1 X-21.125 Y-24.752 E1.41353 G1 X-21.659 Y-24.752 E.01641 G1 X-40.14 Y-6.271 E.80369 G2 X-40.109 Y-6.835 I-2.351 J-.409 E.01741 G1 X-22.193 Y-24.752 E.77917 G1 X-22.726 Y-24.752 E.01641 G1 X-40.182 Y-7.296 E.75912 G2 X-40.329 Y-7.683 I-1.542 J.365 E.01276 G1 X-23.26 Y-24.752 E.7423 G1 X-23.794 Y-24.752 E.01641 G1 X-40.525 Y-8.021 E.7276 G2 X-40.764 Y-8.315 I-1.238 J.762 E.0117 G1 X-24.327 Y-24.752 E.7148 G1 X-24.861 Y-24.752 E.01641 G1 X-41.048 Y-8.565 E.70395 G2 X-41.379 Y-8.767 I-.935 J1.155 E.01197 G1 X-25.395 Y-24.752 E.69514 G1 X-25.928 Y-24.752 E.01641 G1 X-41.758 Y-8.922 E.6884 G2 X-42.199 Y-9.014 I-.775 J2.612 E.01389 G1 X-26.462 Y-24.752 E.68439 G1 X-26.996 Y-24.752 E.01641 G1 X-42.948 Y-8.8 E.69373 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.534 Y-10.214 ;WIPE_END G1 X-41.812 Y-4.598 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-54.163 Y7.752 E.53709 G1 X-54.696 Y7.752 E.01641 G1 X-42.605 Y-4.339 E.52583 G3 X-43.066 Y-4.412 I.275 J-3.246 E.01437 G1 X-55.23 Y7.752 E.52898 G1 X-55.764 Y7.752 E.01641 G1 X-43.453 Y-4.559 E.53538 G3 X-43.791 Y-4.755 I.574 J-1.382 E.01204 G1 X-56.297 Y7.752 E.54389 G1 X-56.831 Y7.752 E.01641 G1 X-44.085 Y-4.994 E.55429 G3 X-44.335 Y-5.278 I2.762 J-2.675 E.01163 G1 X-57.365 Y7.752 E.56666 G1 X-57.898 Y7.752 E.01641 G1 X-44.537 Y-5.609 E.58105 G3 X-44.692 Y-5.988 I1.361 J-.778 E.01262 G1 X-58.432 Y7.752 E.59752 G1 X-58.966 Y7.752 E.01641 G1 X-44.784 Y-6.429 E.61672 G3 X-44.782 Y-6.965 I2.037 J-.259 E.01653 G1 X-59.499 Y7.752 E.64003 G1 X-60.033 Y7.752 E.01641 G1 X-27.529 Y-24.752 E1.41353 G1 X-28.063 Y-24.752 E.01641 G1 X-60.567 Y7.752 E1.41353 G1 X-61.1 Y7.752 E.01641 G1 X-28.597 Y-24.752 E1.41353 G1 X-29.13 Y-24.752 E.01641 G1 X-61.634 Y7.752 E1.41353 G1 X-62.168 Y7.752 E.01641 G1 X-29.664 Y-24.752 E1.41353 G1 X-30.198 Y-24.752 E.01641 G1 X-62.702 Y7.752 E1.41353 G1 X-63.235 Y7.752 E.01641 G1 X-30.731 Y-24.752 E1.41353 G1 X-31.265 Y-24.752 E.01641 G1 X-63.769 Y7.752 E1.41353 G1 X-64.303 Y7.752 E.01641 G1 X-31.799 Y-24.752 E1.41353 G1 X-32.332 Y-24.752 E.01641 G1 X-64.836 Y7.752 E1.41353 G1 X-65.37 Y7.752 E.01641 G1 X-32.866 Y-24.752 E1.41353 G1 X-33.4 Y-24.752 E.01641 G1 X-65.904 Y7.752 E1.41353 G1 X-66.437 Y7.752 E.01641 G1 X-33.933 Y-24.752 E1.41353 G1 X-34.467 Y-24.752 E.01641 G1 X-66.971 Y7.752 E1.41353 G1 X-67.505 Y7.752 E.01641 G1 X-35.001 Y-24.752 E1.41353 G1 X-35.535 Y-24.752 E.01641 G1 X-68.038 Y7.752 E1.41353 G1 X-68.572 Y7.752 E.01641 G1 X-36.068 Y-24.752 E1.41353 G1 X-36.602 Y-24.752 E.01641 G1 X-69.106 Y7.752 E1.41353 G1 X-69.639 Y7.752 E.01641 G1 X-37.136 Y-24.752 E1.41353 G1 X-37.669 Y-24.752 E.01641 G1 X-70.173 Y7.752 E1.41353 G1 X-70.707 Y7.752 E.01641 G1 X-38.203 Y-24.752 E1.41353 G1 X-38.737 Y-24.752 E.01641 G1 X-71.24 Y7.752 E1.41353 G1 X-71.774 Y7.752 E.01641 G1 X-39.27 Y-24.752 E1.41353 G1 X-39.804 Y-24.752 E.01641 G1 X-72.308 Y7.752 E1.41353 G1 X-72.841 Y7.752 E.01641 G1 X-40.338 Y-24.752 E1.41353 G1 X-40.871 Y-24.752 E.01641 G1 X-85.375 Y19.752 E1.93538 G1 X-85.909 Y19.752 E.01641 M73 P13 R94 G1 X-61.699 Y-4.458 E1.05283 G2 X-60.228 Y-5.929 I-.714 J-2.186 E.06641 G1 X-41.405 Y-24.752 E.81856 G1 X-41.939 Y-24.752 E.01641 G1 X-60.105 Y-6.585 E.79004 G2 X-60.139 Y-7.085 I-2.467 J-.086 E.01544 G1 X-42.472 Y-24.752 E.76829 G1 X-43.006 Y-24.752 E.01641 G1 X-60.253 Y-7.505 E.75003 G2 X-60.423 Y-7.869 I-3.297 J1.321 E.01235 G1 X-43.54 Y-24.752 E.73422 G1 X-44.073 Y-24.752 E.01641 G1 X-60.645 Y-8.18 E.72068 G2 X-60.91 Y-8.449 I-1.155 J.869 E.01164 G1 X-44.607 Y-24.752 E.70897 G1 X-45.141 Y-24.752 E.01641 G1 X-61.216 Y-8.677 E.69908 G2 X-61.568 Y-8.858 I-1.808 J3.081 E.01219 G1 X-45.674 Y-24.752 E.6912 G1 X-46.208 Y-24.752 E.01641 G1 X-61.981 Y-8.979 E.68595 G2 X-62.464 Y-9.03 I-.568 J3.04 E.01493 G1 X-46.572 Y-24.922 E.6911 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.173 Y-4.517 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-86.425 Y19.734 E1.05466 G1 X-86.959 Y19.734 E.01641 G1 X-62.855 Y-4.369 E1.04821 G3 X-63.275 Y-4.483 I.223 J-1.651 E.01341 G1 X-87.492 Y19.734 E1.05316 G1 X-88.026 Y19.734 E.01641 G1 X-63.639 Y-4.653 E1.06056 G3 X-63.95 Y-4.875 I.689 J-1.293 E.0118 G1 X-88.56 Y19.734 E1.07023 G1 X-89.093 Y19.734 E.01641 G1 X-64.219 Y-5.14 E1.08173 G3 X-64.447 Y-5.446 I1.049 J-1.017 E.01176 G1 X-89.627 Y19.734 E1.09505 G1 X-89.692 Y19.734 E.00199 G1 X-89.887 Y19.539 E.00851 G1 X-90.531 Y20.182 E.02799 G3 X-90.559 Y20.133 I.055 J-.063 E.00179 G1 X-64.628 Y-5.798 E1.12768 G3 X-64.749 Y-6.211 I1.509 J-.664 E.01327 G1 X-90.684 Y19.724 E1.1279 G1 X-90.684 Y19.191 E.01641 G1 X-64.618 Y-6.876 E1.13358 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.106 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-63.086 Y-8.941 E.69495 G2 X-64.711 Y-7.316 I.626 J2.251 E.07389 G1 X-90.702 Y18.675 E1.13028 G1 X-90.702 Y18.141 E.01641 G1 X-47.809 Y-24.752 E1.86532 G1 X-48.343 Y-24.752 E.01641 G1 X-90.702 Y17.607 E1.84211 G1 X-90.702 Y17.074 E.01641 G1 X-48.876 Y-24.752 E1.81891 G1 X-49.41 Y-24.752 E.01641 G1 X-90.702 Y16.54 E1.7957 G1 X-90.702 Y16.006 E.01641 G1 X-49.944 Y-24.752 E1.77249 G1 X-50.478 Y-24.752 E.01641 G1 X-90.702 Y15.472 E1.74928 G1 X-90.702 Y14.939 E.01641 G1 X-51.011 Y-24.752 E1.72607 G1 X-51.545 Y-24.752 E.01641 G1 X-90.702 Y14.405 E1.70286 G1 X-90.702 Y13.871 E.01641 G1 X-52.079 Y-24.752 E1.67965 G1 X-52.612 Y-24.752 E.01641 G1 X-90.702 Y13.338 E1.65645 G1 X-90.702 Y12.804 E.01641 G1 X-53.146 Y-24.752 E1.63324 G1 X-53.68 Y-24.752 E.01641 G1 X-90.702 Y12.27 E1.61003 G1 X-90.702 Y11.737 E.01641 G1 X-54.213 Y-24.752 E1.58682 G1 X-54.747 Y-24.752 E.01641 G1 X-90.702 Y11.203 E1.56361 G1 X-90.702 Y10.669 E.01641 G1 X-55.281 Y-24.752 E1.5404 G1 X-55.814 Y-24.752 E.01641 G1 X-90.702 Y10.136 E1.51719 G1 X-90.702 Y9.602 E.01641 G1 X-56.348 Y-24.752 E1.49398 G1 X-56.882 Y-24.752 E.01641 G1 X-90.702 Y9.068 E1.47078 G1 X-90.702 Y8.535 E.01641 G1 X-57.415 Y-24.752 E1.44757 G1 X-57.949 Y-24.752 E.01641 G1 X-90.702 Y8.001 E1.42436 G1 X-90.702 Y7.467 E.01641 G1 X-58.483 Y-24.752 E1.40115 G1 X-59.016 Y-24.752 E.01641 G1 X-90.702 Y6.934 E1.37794 G1 X-90.702 Y6.4 E.01641 G1 X-59.55 Y-24.752 E1.35473 G1 X-60.084 Y-24.752 E.01641 G1 X-90.702 Y5.866 E1.33152 G1 X-90.702 Y5.333 E.01641 G1 X-60.617 Y-24.752 E1.30832 G1 X-61.151 Y-24.752 E.01641 G1 X-90.702 Y4.799 E1.28511 G1 X-90.702 Y4.265 E.01641 G1 X-61.685 Y-24.752 E1.2619 G1 X-62.218 Y-24.752 E.01641 G1 X-84.702 Y-2.268 E.97776 G1 X-84.702 Y-2.802 E.01641 G1 X-62.752 Y-24.752 E.95455 G1 X-63.286 Y-24.752 E.01641 G1 X-84.702 Y-3.336 E.93134 G1 X-84.702 Y-3.87 E.01641 G1 X-63.819 Y-24.752 E.90813 G1 X-64.353 Y-24.752 E.01641 G1 X-84.702 Y-4.403 E.88493 G1 X-84.702 Y-4.937 E.01641 G1 X-64.887 Y-24.752 E.86172 G1 X-65.421 Y-24.752 E.01641 G1 X-84.702 Y-5.471 E.83851 G1 X-84.702 Y-6.004 E.01641 G1 X-65.954 Y-24.752 E.8153 G1 X-66.488 Y-24.752 E.01641 G1 X-84.702 Y-6.538 E.79209 G1 X-84.702 Y-7.072 E.01641 G1 X-67.022 Y-24.752 E.76888 G1 X-67.555 Y-24.752 E.01641 G1 X-84.842 Y-7.466 E.75175 G1 X-85.375 Y-7.466 E.01641 G1 X-68.089 Y-24.752 E.75175 G1 X-68.623 Y-24.752 E.01641 G1 X-85.909 Y-7.466 E.75175 G1 X-86.443 Y-7.466 E.01641 G1 X-69.156 Y-24.752 E.75175 G1 X-69.69 Y-24.752 E.01641 G1 X-86.976 Y-7.466 E.75175 G1 X-87.51 Y-7.466 E.01641 G1 X-70.224 Y-24.752 E.75175 G1 X-70.757 Y-24.752 E.01641 G1 X-86.489 Y-9.02 E.68416 G2 X-86.317 Y-9.726 I-2.784 J-1.053 E.0224 G1 X-71.291 Y-24.752 E.65346 G1 X-71.825 Y-24.752 E.01641 G1 X-84.202 Y-12.375 E.53826 G1 X-84.202 Y-12.908 E.01641 G1 X-72.358 Y-24.752 E.51505 G1 X-72.892 Y-24.752 E.01641 G1 X-84.202 Y-13.442 E.49184 G1 X-84.202 Y-13.976 E.01641 G1 X-73.426 Y-24.752 E.46863 G1 X-73.959 Y-24.752 E.01641 G1 X-84.202 Y-14.509 E.44543 G1 X-84.202 Y-15.043 E.01641 G1 X-74.493 Y-24.752 E.42222 G1 X-75.027 Y-24.752 E.01641 G1 X-84.202 Y-15.577 E.39901 G1 X-84.202 Y-16.11 E.01641 G1 X-75.56 Y-24.752 E.3758 G1 X-76.094 Y-24.752 E.01641 G1 X-84.202 Y-16.644 E.35259 G1 X-84.202 Y-17.178 E.01641 G1 X-76.628 Y-24.752 E.32938 G1 X-77.161 Y-24.752 E.01641 G1 X-84.202 Y-17.711 E.30617 G1 X-84.202 Y-18.245 E.01641 G1 X-77.695 Y-24.752 E.28297 G1 X-78.229 Y-24.752 E.01641 G1 X-84.202 Y-18.779 E.25976 G1 X-84.202 Y-19.313 E.01641 G1 X-78.763 Y-24.752 E.23655 G1 X-79.296 Y-24.752 E.01641 G1 X-84.202 Y-19.846 E.21334 G1 X-84.202 Y-20.38 E.01641 G1 X-79.83 Y-24.752 E.19013 G1 X-80.364 Y-24.752 E.01641 G1 X-84.202 Y-20.914 E.16692 G1 X-84.202 Y-21.447 E.01641 G1 X-80.897 Y-24.752 E.14371 G1 X-81.431 Y-24.752 E.01641 G1 X-84.202 Y-21.981 E.1205 G1 X-84.202 Y-22.515 E.01641 G1 X-81.965 Y-24.752 E.0973 G1 X-82.498 Y-24.752 E.01641 G1 X-84.202 Y-23.048 E.07409 G1 X-84.202 Y-23.582 E.01641 G1 X-83.032 Y-24.752 E.05088 G1 X-83.566 Y-24.752 E.01641 G1 X-84.372 Y-23.946 E.03505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.655 Y-11.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-86.316 Y-10.26 E.07225 G2 X-86.398 Y-10.712 I-3.732 J.445 E.01412 G1 X-85.358 Y-11.752 E.04523 G1 X-85.892 Y-11.752 E.01641 G1 X-86.543 Y-11.1 E.02833 G2 X-86.734 Y-11.444 I-1.4 J.551 E.01211 G1 X-86.256 Y-11.922 E.02077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.249 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.702 Y3.732 E.23715 G1 X-90.702 Y3.198 E.01641 G1 X-85.952 Y-1.552 E.20656 G1 X-86.486 Y-1.552 E.01641 G1 X-90.702 Y2.664 E.18335 G1 X-90.702 Y2.13 E.01641 G1 X-87.02 Y-1.552 E.16014 G1 X-87.553 Y-1.552 E.01641 G1 X-90.872 Y1.766 E.14431 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-89.457 Y.352 ;WIPE_END G1 X-87.857 Y-7.11 Z1.2 F30000 G1 X-87.757 Y-7.577 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-87.82 Y-7.54 E.00204 G1 X-87.755 Y-7.505 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-87.82 Y-7.54 G1 X-87.757 Y-7.577 ;WIPE_END G1 X-88.244 Y-1.356 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-89.706 Y-1.356 E.04491 ;WIDTH:0.43955 G1 X-89.788 Y-1.405 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y-1.454 E.0034 ;WIDTH:0.537152 G1 X-89.953 Y-1.502 E.00386 G1 X-89.953 Y-7.291 E.23314 G1 X-90.425 Y-7.498 E.02077 G1 X-90.447 Y-7.487 E.001 G1 X-90.447 Y-1.544 E.23934 ;WIDTH:0.517753 G1 X-90.467 Y-1.263 E.0109 ;WIDTH:0.478651 G1 X-90.486 Y-.982 E.01001 ;WIDTH:0.422183 G1 X-90.506 Y-.701 E.00871 G1 X-90.506 Y.906 E.04966 G1 X-88.272 Y-1.328 E.09762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.275 Y-.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.51998 G1 F15000 G1 X-89.803 Y-.936 E.02051 G1 X-90.079 Y-1.208 E.01507 G1 X-90.079 Y-.125 E.04211 G1 X-89.303 Y-.9 E.04263 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.953 Y20.167 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537303 G1 F15000 G1 X-90.356 Y20.57 E.02299 G1 X-90.447 Y20.579 E.00368 G1 X-90.447 Y26.256 E.2287 ;WIDTH:0.517753 G1 X-90.467 Y26.529 E.01061 ;WIDTH:0.478651 G1 X-90.486 Y26.803 E.00973 ;WIDTH:0.420847 G1 X-90.506 Y27.076 E.00844 G1 X-90.506 Y28.636 E.04804 G1 X-88.314 Y26.444 E.09546 G1 X-89.706 Y26.444 E.04286 ;WIDTH:0.43955 G1 X-89.788 Y26.395 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y26.346 E.0034 ;WIDTH:0.536698 G1 X-89.953 Y26.298 E.00385 G1 X-89.953 Y20.207 E.24507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.322 Y26.862 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.500564 G1 F15000 G1 X-89.817 Y26.851 E.0185 G1 X-90.088 Y26.577 E.01438 G1 X-90.088 Y27.628 E.03922 G1 X-89.35 Y26.89 E.03895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.82 Y49.395 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.61798 G1 F13308.283 G2 X-89.804 Y49.491 I-.036 J.056 E.01426 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13308.283 G1 X-89.82 Y49.519 G1 X-89.892 Y49.519 G1 X-89.928 Y49.457 G1 X-89.892 Y49.395 G1 X-89.82 Y49.395 ;WIPE_END G1 X-89.227 Y41.785 Z1.2 F30000 G1 X-84.054 Y-24.662 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-84.117 Y-24.625 E.00204 G1 X-84.052 Y-24.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.117 Y-24.625 G1 X-84.054 Y-24.662 ;WIPE_END G1 X-76.59 Y-26.256 Z1.2 F30000 G1 X.795 Y-42.79 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X.795 Y-42.355 E.01443 G1 X-6.495 Y-42.355 E.24182 G1 X-6.495 Y-49.645 E.24182 G1 X.795 Y-49.645 E.24182 G1 X.795 Y-42.83 E.22607 G1 X.36 Y-42.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-6.06 Y-42.79 E.19727 G1 X-6.06 Y-49.21 E.19727 G1 X.36 Y-49.21 E.19727 G1 X.36 Y-42.83 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.64 Y-42.818 ;WIPE_END G1 X-6.902 Y-42.052 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-7.298 Y-42.052 E.01313 G1 X-7.298 Y-49.948 E.26192 G1 X-6.902 Y-49.948 E.01313 G1 X-6.902 Y-42.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-7.298 Y-42.052 G1 X-7.298 Y-43.654 ;WIPE_END G1 X.334 Y-43.768 Z1.2 F30000 G1 X1.798 Y-43.79 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X1.798 Y-49.052 E.17455 G1 X5.902 Y-49.052 E.13614 G1 X5.902 Y-42.948 E.20249 G1 X1.798 Y-42.948 E.13614 G1 X1.798 Y-43.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.205 Y-43.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.205 Y-48.645 E.16105 G1 X5.495 Y-48.645 E.10914 G1 X5.495 Y-43.355 E.17548 G1 X2.205 Y-43.355 E.10914 G1 X2.205 Y-43.75 E.0131 G1 X2.64 Y-43.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.64 Y-48.21 E.13581 G1 X5.06 Y-48.21 E.07436 G1 X5.06 Y-43.79 E.13581 G1 X2.68 Y-43.79 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.662 Y-45.79 ;WIPE_END G1 X1.202 Y-42.79 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X1.202 Y-49.948 E.23744 G1 X7.298 Y-49.948 E.20221 G1 X7.298 Y-42.052 E.26192 G1 X1.202 Y-42.052 E.20221 G1 X1.202 Y-42.75 E.02315 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X1.202 Y-44.75 ;WIPE_END G1 X7.705 Y-41.645 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-7.705 Y-41.645 E.51118 G1 X-7.705 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.51118 G1 X7.705 Y-41.685 E.2876 G1 X8.14 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.106 Y-42.5 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X1.406 Y-42.5 E.18719 G1 X1.744 Y-42.256 F30000 ;WIDTH:0.373259 G1 F12000 G1 X1.683 Y-42.378 E.00368 ;WIDTH:0.349663 G1 X1.622 Y-42.5 E.00341 ;WIDTH:0.302472 G1 X1.561 Y-42.622 E.00289 ;WIDTH:0.25528 G1 X1.5 Y-42.744 E.00236 ;WIDTH:0.23217 G1 X1.5 Y-49.256 E.10041 G1 X1.561 Y-49.378 E.00211 ;WIDTH:0.302473 G1 X1.622 Y-49.5 E.00289 ;WIDTH:0.349664 G1 X1.683 Y-49.622 E.00341 ;WIDTH:0.396855 G1 X1.744 Y-49.744 E.00394 G1 X1.406 Y-49.5 F30000 ;WIDTH:0.531684 G1 F12000 G1 X6.106 Y-49.5 E.18719 G1 X6.353 Y-48.798 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537302 G1 F15000 G1 X6.353 Y-43.202 E.22541 G1 X6.455 Y-43.169 E.00431 ;WIDTH:0.520342 G1 X6.472 Y-43.103 E.00267 ;WIDTH:0.48642 G1 X6.488 Y-43.036 E.00248 ;WIDTH:0.436317 G1 X6.505 Y-42.969 E.0022 G1 X6.505 Y-42.452 E.01659 G1 X6.898 Y-42.452 E.01259 G1 X6.898 Y-42.969 E.01659 ;WIDTH:0.452498 G1 X6.881 Y-43.103 E.00448 ;WIDTH:0.48642 G1 X6.864 Y-43.236 E.00485 ;WIDTH:0.53688 G1 X6.847 Y-43.369 E.00541 G1 X6.847 Y-48.631 E.21179 ;WIDTH:0.520342 G1 X6.864 Y-48.764 E.00523 ;WIDTH:0.48642 G1 X6.881 Y-48.897 E.00485 ;WIDTH:0.436996 G1 X6.898 Y-49.031 E.00431 G1 X6.898 Y-49.548 E.01662 G1 X6.505 Y-49.548 E.01261 G1 X6.505 Y-49.031 E.01662 ;WIDTH:0.452498 G1 X6.488 Y-48.964 E.00229 ;WIDTH:0.48642 G1 X6.472 Y-48.897 E.00248 ;WIDTH:0.520124 G3 X6.391 Y-48.81 I-.068 J.018 E.00551 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.999 Y-50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-6.699 Y-50 E.19 G1 X-6.699 Y-42 F30000 G1 F12000 G1 X.999 Y-42 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.001 Y-42 ;WIPE_END G1 X5.228 Y-37.59 Z1.2 F30000 G1 X77.698 Y13.71 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X77.698 Y8.448 E.17455 G1 X81.802 Y8.448 E.13614 G1 X81.802 Y14.552 E.20249 G1 X77.698 Y14.552 E.13614 G1 X77.698 Y13.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X78.105 Y13.71 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X78.105 Y8.855 E.16105 G1 X81.395 Y8.855 E.10914 G1 X81.395 Y14.145 E.17548 G1 X78.105 Y14.145 E.10914 G1 X78.105 Y13.75 E.0131 G1 X78.54 Y13.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X78.54 Y9.29 E.13581 G1 X80.96 Y9.29 E.07436 G1 X80.96 Y13.71 E.13581 G1 X78.58 Y13.71 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X78.562 Y11.71 ;WIPE_END G1 X74.198 Y15.448 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X82.398 Y7.552 E.27519 G1 X82.398 Y15.448 E.26192 G1 X74.238 Y15.448 E.27068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.102 Y15.448 G1 X74.102 Y13.584 ;WIPE_END G1 X81.264 Y10.946 Z1.2 F30000 G1 X89.66 Y7.855 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X90.095 Y7.855 E.01443 G1 X90.095 Y15.145 E.24182 G1 X82.805 Y15.145 E.24182 G1 X82.805 Y7.855 E.24182 G1 X89.62 Y7.855 E.22607 G1 X89.66 Y8.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X89.66 Y14.71 E.19727 G1 X83.24 Y14.71 E.19727 G1 X83.24 Y8.29 E.19727 G1 X89.62 Y8.29 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.502 Y8.29 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X90.502 Y7.552 E.02448 G1 X90.898 Y7.552 E.01313 G1 X90.898 Y15.448 E.26192 G1 X90.502 Y15.448 E.01313 G1 X90.502 Y8.33 E.23611 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X90.502 Y7.552 G1 X90.898 Y7.552 G1 X90.898 Y8.378 ;WIPE_END G1 X83.961 Y11.562 Z1.2 F30000 G1 X74.605 Y15.855 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X91.305 Y7.145 E.58416 G1 X91.305 Y15.855 E.28893 G1 X74.645 Y15.855 E.55264 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X77.494 Y15 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 ;WIDTH:0.531684 G1 F12000 G1 X82.194 Y15 E.18719 G1 X82.039 Y14.878 F30000 ;WIDTH:0.232166 G1 F12000 G1 X82.1 Y14.756 E.00211 G1 X82.1 Y8.244 E.10041 ;WIDTH:0.255276 G1 X82.039 Y8.122 E.00236 ;WIDTH:0.302466 G1 X81.978 Y8 E.00289 ;WIDTH:0.349657 G1 X81.917 Y7.878 E.00341 ;WIDTH:0.373252 G1 X81.856 Y7.756 E.00368 G1 X82.194 Y8 F30000 ;WIDTH:0.531684 G1 F12000 G1 X77.494 Y8 E.18719 G1 X74.446 Y7.838 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X74.383 Y7.875 E.00204 G1 X74.448 Y7.91 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y13.113 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.424713 G1 F15000 G1 X75.533 Y15.252 E.0941 G1 X74.993 Y15.252 E.0168 G1 X77.502 Y12.743 E.11039 G1 X77.502 Y12.203 E.0168 G1 X74.453 Y15.252 E.13415 G1 X74.298 Y15.252 E.00482 G1 X74.298 Y14.867 E.01198 G1 X77.502 Y11.663 E.14096 G1 X77.502 Y11.123 E.0168 G1 X74.298 Y14.327 E.14096 G1 X74.298 Y13.787 E.0168 G1 X77.502 Y10.583 E.14096 G1 X77.502 Y10.043 E.0168 G1 X74.298 Y13.247 E.14096 G1 X74.298 Y12.707 E.0168 G1 X77.502 Y9.503 E.14096 G1 X77.502 Y8.963 E.0168 G1 X74.298 Y12.167 E.14096 G1 X74.298 Y11.627 E.0168 G1 X77.463 Y8.462 E.13926 G1 X77.298 Y8.462 E.00513 G1 X77.298 Y8.087 E.01166 G1 X74.298 Y11.087 E.13201 G1 X74.298 Y10.547 E.0168 G1 X77.097 Y7.748 E.12316 G1 X76.557 Y7.748 E.0168 G1 X74.298 Y10.007 E.0994 G1 X74.298 Y9.467 E.0168 G1 X76.017 Y7.748 E.07564 G1 X75.477 Y7.748 E.0168 G1 X74.298 Y8.927 E.05189 G1 X74.298 Y8.388 E.0168 G1 X75.107 Y7.578 E.0356 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.052 Y14.363 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.62721 G1 F13098.052 G1 X77.159 Y14.269 E.00679 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.052 Y14.363 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.604705 G1 F13622.763 G1 X76.929 Y14.454 E.00701 ;WIDTH:0.559695 G1 F14809.287 G1 X76.806 Y14.545 E.00645 ;WIDTH:0.494535 G1 F15000 G1 X76.683 Y14.636 E.00563 G1 X76.299 Y15.02 E.01996 G1 X77.066 Y15.02 E.02822 ;WIDTH:0.514684 G1 X77.062 Y14.814 E.00791 ;WIDTH:0.559695 G1 F14809.287 G1 X77.057 Y14.608 E.00866 ;WIDTH:0.5822 G1 F14191.265 G1 X77.053 Y14.403 E.00904 SET_VELOCITY_LIMIT ACCEL=10000 G1 X81.856 Y15.244 F30000 ;TYPE:Gap infill ;WIDTH:0.396847 G1 F12000 G1 X81.917 Y15.122 E.00394 ;WIDTH:0.349657 G1 X81.978 Y15 E.00341 ;WIDTH:0.302467 G1 X82.039 Y14.878 E.00289 G1 X82.601 Y15.5 F30000 ;WIDTH:0.345842 G1 F12000 G1 X90.299 Y15.5 E.19 G1 X90.299 Y7.5 F30000 G1 F12000 G1 X82.601 Y7.5 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X84.601 Y7.5 ;WIPE_END G1 X79.338 Y13.027 Z1.2 F30000 G1 X55.548 Y38.01 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z1.2 F30000 G1 Z.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X49.645 Y-5.756 Z1.2 F30000 G1 X3.102 Y40.648 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X35.998 Y-10.448 E1.09122 G1 X35.998 Y40.648 E1.69494 G1 X3.142 Y40.648 E1.08989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.926 Y39.765 Z1.2 F30000 G1 X33.691 Y40.622 Z1.2 G1 Z.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.420495 G1 F15000 G1 X35.802 Y38.511 E.09186 G1 X35.802 Y37.977 E.01643 G1 X33.327 Y40.452 E.10771 G1 X32.793 Y40.452 E.01643 G1 X35.802 Y37.443 E.13094 G1 X35.802 Y36.909 E.01643 G1 X32.259 Y40.452 E.15417 G1 X31.725 Y40.452 E.01643 G1 X35.802 Y36.375 E.17741 G1 X35.802 Y35.841 E.01643 G1 X31.191 Y40.452 E.20064 G1 X30.657 Y40.452 E.01643 G1 X35.802 Y35.307 E.22388 G1 X35.802 Y34.773 E.01643 G1 X30.123 Y40.452 E.24711 G1 X29.589 Y40.452 E.01643 G1 X35.802 Y34.239 E.27034 G1 X35.802 Y33.705 E.01643 G1 X29.055 Y40.452 E.29358 G1 X28.521 Y40.452 E.01643 G1 X35.802 Y33.171 E.31681 G1 X35.802 Y32.637 E.01643 G1 X27.987 Y40.452 E.34005 G1 X27.453 Y40.452 E.01643 G1 X35.802 Y32.103 E.36328 G1 X35.802 Y31.569 E.01643 G1 X26.919 Y40.452 E.38652 G1 X26.385 Y40.452 E.01643 G1 X35.802 Y31.035 E.40975 G1 X35.802 Y30.501 E.01643 G1 X25.851 Y40.452 E.43298 G1 X25.317 Y40.452 E.01643 G1 X35.802 Y29.967 E.45622 G1 X35.802 Y29.433 E.01643 G1 X24.783 Y40.452 E.47945 G1 X24.249 Y40.452 E.01643 G1 X35.802 Y28.899 E.50269 G1 X35.802 Y28.365 E.01643 G1 X23.715 Y40.452 E.52592 G1 X23.181 Y40.452 E.01643 G1 X35.802 Y27.831 E.54915 G1 X35.802 Y27.297 E.01643 G1 X22.647 Y40.452 E.57239 G1 X22.113 Y40.452 E.01643 G1 X35.802 Y26.763 E.59562 G1 X35.802 Y26.229 E.01643 G1 X21.579 Y40.452 E.61886 G1 X21.045 Y40.452 E.01643 G1 X35.802 Y25.695 E.64209 G1 X35.802 Y25.161 E.01643 G1 X20.511 Y40.452 E.66533 G1 X19.977 Y40.452 E.01643 G1 X35.802 Y24.627 E.68856 G1 X35.802 Y24.093 E.01643 G1 X19.443 Y40.452 E.71179 G1 X18.909 Y40.452 E.01643 G1 X35.802 Y23.559 E.73503 G1 X35.802 Y23.025 E.01643 G1 X18.375 Y40.452 E.75826 G1 X17.841 Y40.452 E.01643 G1 X35.802 Y22.491 E.7815 G1 X35.802 Y21.957 E.01643 G1 X17.307 Y40.452 E.80473 G1 X16.773 Y40.452 E.01643 G1 X35.802 Y21.423 E.82796 G1 X35.802 Y20.889 E.01643 G1 X16.239 Y40.452 E.8512 G1 X15.705 Y40.452 E.01643 M73 P14 R94 G1 X35.802 Y20.356 E.87443 G1 X35.802 Y19.822 E.01643 G1 X15.172 Y40.452 E.89767 G1 X14.638 Y40.452 E.01643 G1 X35.802 Y19.288 E.9209 G1 X35.802 Y18.754 E.01643 G1 X14.104 Y40.452 E.94413 G1 X13.57 Y40.452 E.01643 G1 X35.802 Y18.22 E.96737 G1 X35.802 Y17.686 E.01643 G1 X13.036 Y40.452 E.9906 G1 X12.502 Y40.452 E.01643 G1 X35.802 Y17.152 E1.01384 G1 X35.802 Y16.618 E.01643 G1 X11.968 Y40.452 E1.03707 G1 X11.434 Y40.452 E.01643 G1 X35.802 Y16.084 E1.06031 G1 X35.802 Y15.55 E.01643 G1 X10.9 Y40.452 E1.08354 G1 X10.366 Y40.452 E.01643 G1 X35.802 Y15.016 E1.10677 G1 X35.802 Y14.482 E.01643 G1 X9.832 Y40.452 E1.13001 G1 X9.298 Y40.452 E.01643 G1 X35.802 Y13.948 E1.15324 G1 X35.802 Y13.414 E.01643 G1 X8.764 Y40.452 E1.17648 G1 X8.23 Y40.452 E.01643 G1 X35.802 Y12.88 E1.19971 G1 X35.802 Y12.346 E.01643 G1 X7.696 Y40.452 E1.22294 G1 X7.162 Y40.452 E.01643 G1 X35.802 Y11.812 E1.24618 G1 X35.802 Y11.278 E.01643 G1 X6.628 Y40.452 E1.26941 G1 X6.094 Y40.452 E.01643 G1 X35.802 Y10.744 E1.29265 G1 X35.802 Y10.21 E.01643 G1 X5.56 Y40.452 E1.31588 G1 X5.026 Y40.452 E.01643 G1 X35.802 Y9.676 E1.33912 G1 X35.802 Y9.142 E.01643 G1 X4.492 Y40.452 E1.36235 G1 X3.958 Y40.452 E.01643 G1 X35.802 Y8.608 E1.38558 G1 X35.802 Y8.074 E.01643 G1 X3.424 Y40.452 E1.40882 G1 X3.298 Y40.452 E.00388 G1 X3.298 Y40.044 E.01255 G1 X35.802 Y7.54 E1.4143 G1 X35.802 Y7.006 E.01643 G1 X3.298 Y39.51 E1.4143 G1 X3.298 Y38.976 E.01643 G1 X35.802 Y6.472 E1.4143 G1 X35.802 Y5.938 E.01643 G1 X3.298 Y38.442 E1.4143 G1 X3.298 Y37.908 E.01643 G1 X35.802 Y5.404 E1.4143 G1 X35.802 Y4.87 E.01643 G1 X3.298 Y37.374 E1.4143 G1 X3.298 Y36.84 E.01643 G1 X35.802 Y4.336 E1.4143 G1 X35.802 Y3.802 E.01643 G1 X3.298 Y36.306 E1.4143 G1 X3.298 Y35.772 E.01643 G1 X35.802 Y3.268 E1.4143 G1 X35.802 Y2.734 E.01643 G1 X3.298 Y35.238 E1.4143 G1 X3.298 Y34.704 E.01643 G1 X35.802 Y2.2 E1.4143 G1 X35.802 Y1.666 E.01643 G1 X3.298 Y34.17 E1.4143 G1 X3.298 Y33.636 E.01643 G1 X35.802 Y1.133 E1.4143 G1 X35.802 Y.599 E.01643 G1 X3.298 Y33.102 E1.4143 G1 X3.298 Y32.568 E.01643 G1 X35.802 Y.065 E1.4143 G1 X35.802 Y-.469 E.01643 G1 X3.298 Y32.034 E1.4143 G1 X3.298 Y31.5 E.01643 G1 X35.802 Y-1.003 E1.4143 G1 X35.802 Y-1.537 E.01643 G1 X3.298 Y30.966 E1.4143 G1 X3.298 Y30.432 E.01643 G1 X35.802 Y-2.071 E1.4143 G1 X35.802 Y-2.605 E.01643 G1 X3.298 Y29.898 E1.4143 G1 X3.298 Y29.365 E.01643 G1 X35.802 Y-3.139 E1.4143 G1 X35.802 Y-3.673 E.01643 G1 X3.298 Y28.831 E1.4143 G1 X3.298 Y28.297 E.01643 G1 X35.802 Y-4.207 E1.4143 G1 X35.802 Y-4.741 E.01643 G1 X3.298 Y27.763 E1.4143 G1 X3.298 Y27.229 E.01643 G1 X35.802 Y-5.275 E1.4143 G1 X35.802 Y-5.809 E.01643 G1 X3.298 Y26.695 E1.4143 G1 X3.298 Y26.161 E.01643 G1 X35.802 Y-6.343 E1.4143 G1 X35.802 Y-6.877 E.01643 G1 X3.298 Y25.627 E1.4143 G1 X3.298 Y25.093 E.01643 G1 X35.802 Y-7.411 E1.4143 G1 X35.802 Y-7.945 E.01643 G1 X3.298 Y24.559 E1.4143 G1 X3.298 Y24.025 E.01643 G1 X35.802 Y-8.479 E1.4143 G1 X35.802 Y-9.013 E.01643 G1 X3.298 Y23.491 E1.4143 G1 X3.298 Y22.957 E.01643 G1 X35.802 Y-9.547 E1.4143 G1 X35.802 Y-10.081 E.01643 G1 X3.298 Y22.423 E1.4143 G1 X3.298 Y21.889 E.01643 G1 X35.439 Y-10.252 E1.39851 G1 X34.905 Y-10.252 E.01643 G1 X3.298 Y21.355 E1.37527 G1 X3.298 Y20.821 E.01643 G1 X34.371 Y-10.252 E1.35204 G1 X33.837 Y-10.252 E.01643 G1 X3.298 Y20.287 E1.32881 G1 X3.298 Y19.753 E.01643 G1 X33.303 Y-10.252 E1.30557 G1 X32.769 Y-10.252 E.01643 G1 X3.298 Y19.219 E1.28234 G1 X3.298 Y18.685 E.01643 G1 X32.235 Y-10.252 E1.2591 G1 X31.701 Y-10.252 E.01643 G1 X3.298 Y18.151 E1.23587 G1 X3.298 Y17.617 E.01643 G1 X31.167 Y-10.252 E1.21263 G1 X30.633 Y-10.252 E.01643 G1 X3.298 Y17.083 E1.1894 G1 X3.298 Y16.549 E.01643 G1 X30.099 Y-10.252 E1.16617 G1 X29.565 Y-10.252 E.01643 G1 X3.298 Y16.015 E1.14293 G1 X3.298 Y15.481 E.01643 G1 X29.031 Y-10.252 E1.1197 G1 X28.497 Y-10.252 E.01643 G1 X3.298 Y14.947 E1.09646 G1 X3.298 Y14.413 E.01643 G1 X27.963 Y-10.252 E1.07323 G1 X27.429 Y-10.252 E.01643 G1 X3.298 Y13.879 E1.05 G1 X3.298 Y13.345 E.01643 G1 X26.895 Y-10.252 E1.02676 G1 X26.361 Y-10.252 E.01643 G1 X3.298 Y12.811 E1.00353 G1 X3.298 Y12.277 E.01643 G1 X25.827 Y-10.252 E.98029 G1 X25.293 Y-10.252 E.01643 G1 X3.298 Y11.743 E.95706 G1 X3.298 Y11.209 E.01643 G1 X24.759 Y-10.252 E.93383 G1 X24.226 Y-10.252 E.01643 G1 X3.298 Y10.676 E.91059 G1 X3.298 Y10.142 E.01643 G1 X23.692 Y-10.252 E.88736 G1 X23.158 Y-10.252 E.01643 G1 X3.298 Y9.608 E.86412 G1 X3.298 Y9.074 E.01643 G1 X22.624 Y-10.252 E.84089 G1 X22.09 Y-10.252 E.01643 G1 X3.298 Y8.54 E.81765 G1 X3.298 Y8.006 E.01643 G1 X21.556 Y-10.252 E.79442 G1 X21.022 Y-10.252 E.01643 G1 X3.298 Y7.472 E.77119 G1 X3.298 Y6.938 E.01643 G1 X20.488 Y-10.252 E.74795 G1 X19.954 Y-10.252 E.01643 G1 X3.298 Y6.404 E.72472 G1 X3.298 Y5.87 E.01643 G1 X19.42 Y-10.252 E.70148 G1 X18.886 Y-10.252 E.01643 G1 X3.298 Y5.336 E.67825 G1 X3.298 Y4.802 E.01643 G1 X18.352 Y-10.252 E.65502 G1 X17.818 Y-10.252 E.01643 G1 X3.298 Y4.268 E.63178 G1 X3.298 Y3.734 E.01643 G1 X17.284 Y-10.252 E.60855 G1 X16.75 Y-10.252 E.01643 G1 X3.298 Y3.2 E.58531 G1 X3.298 Y2.666 E.01643 G1 X16.216 Y-10.252 E.56208 G1 X15.682 Y-10.252 E.01643 G1 X3.298 Y2.132 E.53884 G1 X3.298 Y1.598 E.01643 G1 X15.148 Y-10.252 E.51561 G1 X14.614 Y-10.252 E.01643 G1 X3.298 Y1.064 E.49238 G1 X3.298 Y.53 E.01643 G1 X14.08 Y-10.252 E.46914 G1 X13.546 Y-10.252 E.01643 G1 X3.298 Y-.004 E.44591 G1 X3.298 Y-.538 E.01643 G1 X13.012 Y-10.252 E.42267 G1 X12.478 Y-10.252 E.01643 G1 X3.298 Y-1.072 E.39944 G1 X3.298 Y-1.606 E.01643 G1 X11.944 Y-10.252 E.37621 G1 X11.41 Y-10.252 E.01643 G1 X3.298 Y-2.14 E.35297 G1 X3.298 Y-2.674 E.01643 G1 X10.876 Y-10.252 E.32974 G1 X10.342 Y-10.252 E.01643 G1 X3.298 Y-3.208 E.3065 G1 X3.298 Y-3.742 E.01643 G1 X9.808 Y-10.252 E.28327 G1 X9.274 Y-10.252 E.01643 G1 X3.298 Y-4.276 E.26004 G1 X3.298 Y-4.81 E.01643 G1 X8.74 Y-10.252 E.2368 G1 X8.206 Y-10.252 E.01643 G1 X3.298 Y-5.344 E.21357 G1 X3.298 Y-5.878 E.01643 G1 X7.672 Y-10.252 E.19033 G1 X7.138 Y-10.252 E.01643 G1 X3.298 Y-6.412 E.1671 G1 X3.298 Y-6.946 E.01643 G1 X6.604 Y-10.252 E.14386 G1 X6.07 Y-10.252 E.01643 G1 X3.298 Y-7.48 E.12063 G1 X3.298 Y-8.014 E.01643 G1 X5.537 Y-10.252 E.0974 G1 X5.003 Y-10.252 E.01643 G1 X3.298 Y-8.547 E.07416 G1 X3.298 Y-9.081 E.01643 G1 X4.469 Y-10.252 E.05093 G1 X3.935 Y-10.252 E.01643 G1 X3.128 Y-9.446 E.03508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-10.162 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X3.383 Y-10.125 E.00204 G1 X3.448 Y-10.09 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.544 Y39.337 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.544538 G1 F15000 G1 X34.687 Y40.194 E.0495 G1 X35.544 Y40.194 E.035 G1 X35.544 Y39.377 E.03337 ;LAYER_CHANGE ;Z:1 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X35.544 Y40.194 G1 X34.687 Y40.194 G1 X34.919 Y39.962 ;WIPE_END ;AFTER_LAYER_CHANGE ;1 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.4 I.159 J-1.207 P1 F30000 G1 X-31.398 Y31.21 Z1.4 G1 Z1 M73 P14 R93 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.031 Y25.231 Z1.4 F30000 G1 X-64.59 Y-6.462 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.609 Y-6.68 E.00724 G3 X-63.004 Y-8.762 I2.152 J-.001 E.0938 G1 X-62.721 Y-8.817 E.00959 G3 X-64.59 Y-6.398 I.264 J2.136 E.33575 G1 X-64.59 Y-6.422 E.0008 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y-6.489 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.2 Y-6.68 E.00636 G3 X-62.9 Y-8.368 I1.744 J-.001 E.07601 G1 X-62.669 Y-8.412 E.00782 G3 X-64.185 Y-6.449 I.213 J1.731 E.27206 G1 X-63.75 Y-6.518 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.763 Y-6.68 E.00501 G3 X-62.789 Y-7.946 I1.309 J0 E.0528 G1 X-62.613 Y-7.98 E.00549 G3 X-63.747 Y-6.478 I.159 J1.299 E.18819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.763 Y-6.68 G1 X-63.716 Y-7.019 G1 X-63.585 Y-7.335 G1 X-63.489 Y-7.478 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.705 Y-7.962 ;WIPE_END G1 X-55.103 Y-7.28 Z1.4 F30000 G1 X-40.424 Y-5.962 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.472 Y-5.849 E.00408 G3 X-43.004 Y-8.762 I-1.985 J-.832 E.2897 G1 X-42.721 Y-8.817 E.00959 G3 X-40.379 Y-6.122 I.264 J2.136 E.13966 G1 X-40.413 Y-6.001 E.00416 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.809 Y-6.096 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.847 Y-6.006 E.00324 G3 X-42.9 Y-8.368 I-1.609 J-.675 E.2348 G1 X-42.669 Y-8.412 E.00782 G3 X-40.771 Y-6.228 I.213 J1.731 E.11317 G1 X-40.798 Y-6.134 E.00324 G1 X-41.227 Y-6.237 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.32 Y-6.027 E.00704 G3 X-42.789 Y-7.946 I-1.134 J-.653 E.15814 G1 X-42.613 Y-7.98 E.00549 G3 X-41.19 Y-6.342 I.159 J1.299 E.0786 G1 X-41.214 Y-6.275 E.00218 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.32 Y-6.027 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.79 Y-5.414 G1 X-42.807 Y-5.421 ;WIPE_END G1 X-35.193 Y-5.946 Z1.4 F30000 G1 X-16.24 Y-7.252 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.398 Y-7.252 E.02793 G1 X-15.398 Y-1.748 E.18258 G1 X-20.002 Y-1.748 E.15273 G1 X-20.002 Y-7.252 E.18258 G1 X-16.28 Y-7.252 E.12347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.24 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.805 Y-6.845 E.01443 G1 X-15.805 Y-2.155 E.15558 G1 X-19.595 Y-2.155 E.12572 G1 X-19.595 Y-6.845 E.15558 G1 X-16.28 Y-6.845 E.10996 G1 X-16.24 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-17.216 Y3.162 Z1.4 F30000 G1 X-20.002 Y25.21 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.224 Y29.657 Z1.4 F30000 G1 X-33.168 Y45.346 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.274 Y45.31 E.00371 G3 X-33.004 Y41.238 I.817 J-1.991 E.17808 G1 X-32.721 Y41.183 E.00959 G3 X-33.007 Y45.399 I.264 J2.136 E.25149 G1 X-33.13 Y45.359 E.0043 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.038 Y44.961 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.118 Y44.933 E.00283 G3 X-32.9 Y41.632 I.663 J-1.614 E.14433 G1 X-32.669 Y41.588 E.00782 G3 X-32.902 Y45.006 I.213 J1.731 E.20384 G1 X-33 Y44.973 E.00342 G1 X-32.899 Y44.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.105 Y44.455 E.00687 G3 X-32.789 Y42.054 I.651 J-1.135 E.09502 G1 X-32.613 Y42.02 E.00549 G3 X-32.789 Y44.585 I.159 J1.299 E.14166 G1 X-32.862 Y44.555 E.00241 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.661 Y43.821 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.706 Y42.958 ;WIPE_END G1 X-41.325 Y43.42 Z1.4 F30000 G1 X-73.155 Y45.351 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.274 Y45.31 E.00418 G3 X-73.004 Y41.238 I.817 J-1.991 E.17808 G1 X-72.721 Y41.183 E.00959 G3 X-73.007 Y45.399 I.264 J2.136 E.25149 G1 X-73.117 Y45.363 E.00383 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.024 Y44.965 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.118 Y44.933 E.0033 G3 X-72.9 Y41.632 I.663 J-1.614 E.14434 G1 X-72.669 Y41.588 E.00782 G3 X-72.902 Y45.006 I.213 J1.731 E.20384 G1 X-72.986 Y44.978 E.00295 G1 X-72.886 Y44.546 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.105 Y44.455 E.0073 G3 X-72.789 Y42.054 I.651 J-1.135 E.09502 G1 X-72.613 Y42.02 E.00549 G3 X-72.789 Y44.585 I.159 J1.299 E.14166 G1 X-72.849 Y44.561 E.00198 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.749 Y43.491 G1 X-73.76 Y43.32 G1 X-73.716 Y42.981 G1 X-73.712 Y42.971 ;WIPE_END G1 X-77.868 Y36.57 Z1.4 F30000 G1 X-88.66 Y19.948 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-87.203 Y13.189 Z1.4 F30000 G1 X-88.66 Y-7.252 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y-7.252 E.1248 G1 X-84.898 Y-1.748 E.18258 G1 X-89.502 Y-1.748 E.15273 G1 X-89.502 Y-7.252 E.18258 G1 X-88.7 Y-7.252 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y-6.845 E.11129 G1 X-85.305 Y-2.155 E.15558 G1 X-89.095 Y-2.155 E.12572 G1 X-89.095 Y-6.845 E.15558 G1 X-88.7 Y-6.845 E.0131 G1 X-88.66 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-79.052 Y-7.007 Z1.4 F30000 G1 X-17.443 Y-11.948 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-14.002 Y-8.507 I1.497 J1.944 E.27678 G1 X-14.002 Y49.948 E1.93905 G1 X-15.685 Y49.948 E.05584 G2 X-20.215 Y49.948 I-2.265 J-.944 E.32 G1 X-84.685 Y49.948 E2.13862 G2 X-89.215 Y49.948 I-2.265 J-.944 E.32 G1 X-90.898 Y49.948 E.05584 G1 X-90.898 Y-8.507 E1.93905 G2 X-87.457 Y-11.948 I1.945 J-1.497 E.27679 G1 X-84.398 Y-11.948 E.10147 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-17.483 Y-11.948 E.10014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.685 Y-11.735 G1 X-17.897 Y-11.494 G1 X-18.076 Y-11.227 G1 X-18.218 Y-10.939 G1 X-18.321 Y-10.635 G1 X-18.383 Y-10.32 G1 X-18.39 Y-10.219 ;WIPE_END G1 X-15.408 Y-11.972 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.17 Y-11.883 E.00842 G3 X-16.973 Y-11.772 I-.789 J1.886 E.36394 G3 X-16.119 Y-12.035 I.997 J1.72 E.02991 G3 X-15.447 Y-11.976 I.16 J2.038 E.02248 G1 X-15.535 Y-11.549 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-16.566 Y-11.488 I-.425 J1.552 E.27827 G3 X-16.09 Y-11.601 I.642 J1.638 E.01509 G3 X-15.574 Y-11.56 I.13 J1.603 E.016 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.334 Y-11.488 G1 X-15.145 Y-11.395 G1 X-14.97 Y-11.278 G1 X-14.811 Y-11.139 G1 X-14.672 Y-10.98 G1 X-14.555 Y-10.805 G1 X-14.462 Y-10.616 G1 X-14.394 Y-10.417 G1 X-14.353 Y-10.21 G1 X-14.349 Y-10.146 ;WIPE_END G1 X-14.457 Y-11.948 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-14.002 Y-11.948 E.01508 G1 X-14.002 Y-11.493 E.01508 G2 X-14.425 Y-11.923 I-1.955 J1.5 E.02007 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-14.002 Y-11.948 G1 X-14.002 Y-11.493 G1 X-14.215 Y-11.735 G1 X-14.425 Y-11.923 ;WIPE_END G1 X-22.049 Y-11.55 Z1.4 F30000 G1 X-89.961 Y-8.222 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-89.975 Y-8.224 E.00047 G3 X-89.973 Y-11.772 I1.016 J-1.773 E.14252 G3 X-89.119 Y-12.035 I.997 J1.72 E.02991 G3 X-89.734 Y-8.106 I.16 J2.038 E.24469 G1 X-89.926 Y-8.204 E.00712 G1 X-89.758 Y-8.601 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-89.566 Y-11.488 I.798 J-1.397 E.11053 G3 X-89.09 Y-11.601 I.642 J1.638 E.01509 G3 X-89.723 Y-8.582 I.13 J1.603 E.18373 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-89.93 Y-8.722 G1 X-90.089 Y-8.861 G1 X-90.228 Y-9.02 G1 X-90.345 Y-9.195 G1 X-90.438 Y-9.384 G1 X-90.506 Y-9.583 G1 X-90.547 Y-9.79 G1 X-90.56 Y-10 G1 X-90.547 Y-10.21 G1 X-90.534 Y-10.273 ;WIPE_END G1 X-90.898 Y-11.493 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-90.898 Y-11.948 E.01508 G1 X-90.443 Y-11.948 E.01508 G1 X-90.685 Y-11.735 E.01069 G1 X-90.872 Y-11.523 E.00936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-90.898 Y-11.948 G1 X-90.443 Y-11.948 G1 X-90.685 Y-11.735 G1 X-90.872 Y-11.523 ;WIPE_END G1 X-83.24 Y-11.612 Z1.4 F30000 G1 X-19.66 Y-12.355 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-13.595 Y-12.355 E.20119 G1 X-13.595 Y50.355 E2.08021 G1 X-16.399 Y50.355 E.09303 G2 X-16.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-19.722 Y50.023 I-1.444 J1.451 E.19522 G1 X-19.501 Y50.355 E.01324 G1 X-85.399 Y50.355 E2.18599 G2 X-85.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-88.722 Y50.023 I-1.444 J1.451 E.19522 G1 X-88.501 Y50.355 E.01324 G1 X-91.305 Y50.355 E.09303 G1 X-91.305 Y-12.355 E2.08021 G1 X-84.805 Y-12.355 E.21562 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-19.7 Y-12.355 E.0131 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.7 Y-12.355 ;WIPE_END G1 X-17.902 Y-4.725 Z1.4 F30000 G1 X-19.344 Y49.806 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.348 Y49.807 E.00014 G3 X-18.755 Y47.605 I1.391 J-.806 E.07789 G3 X-18.09 Y47.399 I.785 J1.354 E.02158 G3 X-19.231 Y49.983 I.133 J1.603 E.2045 G1 X-19.323 Y49.839 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.348 Y49.807 G1 X-19.438 Y49.616 G1 X-19.506 Y49.417 G1 X-19.547 Y49.21 G1 X-19.56 Y49 G1 X-19.547 Y48.79 G1 X-19.506 Y48.583 G1 X-19.438 Y48.384 G1 X-19.345 Y48.195 G1 X-19.228 Y48.02 G1 X-19.186 Y47.972 ;WIPE_END G1 X-26.816 Y48.175 Z1.4 F30000 G1 X-88.342 Y49.809 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-88.349 Y49.808 E.00022 G3 X-87.755 Y47.605 I1.392 J-.806 E.07791 G3 X-87.09 Y47.399 I.785 J1.354 E.02158 G3 X-88.231 Y49.983 I.133 J1.603 E.2046 G1 X-88.321 Y49.843 E.00511 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-88.349 Y49.808 G1 X-88.438 Y49.616 G1 X-88.506 Y49.417 G1 X-88.547 Y49.21 G1 X-88.56 Y49 G1 X-88.547 Y48.79 G1 X-88.506 Y48.583 G1 X-88.438 Y48.384 G1 X-88.345 Y48.195 G1 X-88.228 Y48.02 G1 X-88.189 Y47.976 ;WIPE_END G1 X-82.478 Y42.912 Z1.4 F30000 G1 X-19.66 Y-12.79 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-91.74 Y50.79 E2.41454 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-14.969 Y-6.85 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.491347 G1 F15000 G1 X-14.429 Y-7.06 E.02117 G1 X-14.429 Y-7.561 E.01833 G1 X-14.969 Y-7.306 E.02183 G1 X-14.969 Y-6.89 E.0152 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.785 Y-8.28 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.485814 G1 F15000 G2 X-18.31 Y-7.676 I4.004 J-2.655 E.02776 G1 X-17.612 Y-7.676 E.0252 G1 X-18.004 Y-7.986 E.01806 G1 X-18.427 Y-8.537 E.02505 G1 X-18.721 Y-9.228 E.0271 G1 X-18.827 Y-9.971 E.0271 G1 X-18.736 Y-10.717 E.0271 G3 X-18.39 Y-11.52 I4.644 J1.524 E.03162 G1 X-18.89 Y-11.52 E.01806 G1 X-19.134 Y-10.928 E.02311 G2 X-19.265 Y-9.929 I3.43 J.959 E.0365 G1 X-19.171 Y-9.212 E.02609 G2 X-18.803 Y-8.316 I3.309 J-.837 E.03508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.351 Y-6.622 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-15.187 Y-6.341 I-1.613 J-3.423 E.02932 G1 X-15.187 Y-5.598 E.02465 G1 X-14.59 Y-5.3 E.02213 G1 X-14.213 Y-5.276 E.01254 G1 X-14.213 Y-2.868 E.07987 G3 X-15.187 Y-2.641 I-.755 J-1.037 E.03407 G1 X-15.187 Y-4.269 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-15.187 Y-2.641 G1 X-14.816 Y-2.665 ;WIPE_END G1 X-16.964 Y-9.989 Z1.4 F30000 G1 X-21.288 Y-24.737 Z1.4 G1 Z1 G1 E.8 F1800 G1 F16200 G1 X-20.713 Y-24.737 E.01908 G1 X-20.713 Y-23.684 E.03493 G3 X-21.797 Y-24.686 I1.793 J-3.028 E.04933 G1 X-21.899 Y-24.737 E.00379 G1 X-23.675 Y-24.737 E.05889 G2 X-24.418 Y-23.972 I2.941 J3.601 E.03545 G3 X-26.056 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-27.141 Y-24.737 I-41.566 J43.273 E.04932 G1 X-28.916 Y-24.737 E.05889 G2 X-29.659 Y-23.972 I2.941 J3.601 E.03545 G3 X-31.297 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-32.382 Y-24.737 I-41.568 J43.275 E.04932 G1 X-34.157 Y-24.737 E.05889 G2 X-34.9 Y-23.972 I2.941 J3.601 E.03545 G3 X-36.538 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-37.623 Y-24.737 I-41.568 J43.275 E.04932 G1 X-39.399 Y-24.737 E.05889 G2 X-40.142 Y-23.972 I2.941 J3.601 E.03545 G3 X-41.78 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-42.865 Y-24.737 I-41.568 J43.275 E.04932 G1 X-44.64 Y-24.737 E.05889 G2 X-45.383 Y-23.972 I2.941 J3.601 E.03545 G3 X-47.021 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-48.106 Y-24.737 I-41.562 J43.269 E.04932 G1 X-49.881 Y-24.737 E.05889 G2 X-50.624 Y-23.972 I2.941 J3.601 E.03545 G3 X-52.262 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-53.347 Y-24.737 I-41.559 J43.266 E.04932 G1 X-55.123 Y-24.737 E.05889 G2 X-55.866 Y-23.972 I2.941 J3.601 E.03545 G3 X-57.504 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-58.589 Y-24.737 I-41.559 J43.266 E.04932 G1 X-60.364 Y-24.737 E.05889 G2 X-61.107 Y-23.972 I2.942 J3.601 E.03545 G3 X-62.745 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-63.83 Y-24.737 I-41.562 J43.269 E.04932 G1 X-65.605 Y-24.737 E.05889 G2 X-66.348 Y-23.972 I2.941 J3.601 E.03545 G3 X-67.986 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-69.071 Y-24.737 I-41.562 J43.269 E.04932 G1 X-70.846 Y-24.737 E.05889 G2 X-71.59 Y-23.972 I2.941 J3.601 E.03545 G3 X-73.227 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-74.312 Y-24.737 I-41.562 J43.269 E.04932 G1 X-76.088 Y-24.737 E.05889 G2 X-76.831 Y-23.972 I2.941 J3.601 E.03545 G3 X-78.469 Y-23.72 I-1.056 J-1.418 E.05721 G2 X-79.554 Y-24.737 I-41.555 J43.262 E.04932 G1 X-81.329 Y-24.737 E.05889 G2 X-82.072 Y-23.972 I2.941 J3.601 E.03545 G3 X-83.71 Y-23.72 I-1.056 J-1.418 E.05721 G3 X-84.187 Y-24.152 I1.632 J-2.282 E.02139 G1 X-84.187 Y-22.168 E.06583 G3 X-83.382 Y-21.352 I-3.134 J3.893 E.0381 G2 X-81.745 Y-21.1 I1.056 J-1.418 E.05721 G2 X-80.762 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-79.124 Y-22.317 I1.056 J1.418 E.05721 G3 X-78.141 Y-21.352 I-3.691 J4.74 E.0458 G2 X-76.503 Y-21.1 I1.056 J-1.418 E.05721 G2 X-75.52 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-73.883 Y-22.317 I1.056 J1.418 E.05721 G3 X-72.9 Y-21.352 I-3.692 J4.74 E.0458 G2 X-71.262 Y-21.1 I1.056 J-1.418 E.05721 G2 X-70.279 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-68.641 Y-22.317 I1.056 J1.418 E.05721 G3 X-67.659 Y-21.352 I-3.691 J4.74 E.0458 G2 X-66.021 Y-21.1 I1.056 J-1.418 E.05721 G2 X-65.038 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-63.4 Y-22.317 I1.056 J1.418 E.05721 G3 X-62.417 Y-21.352 I-3.691 J4.74 E.0458 G2 X-60.779 Y-21.1 I1.056 J-1.418 E.05721 G2 X-59.797 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-58.159 Y-22.317 I1.056 J1.418 E.05721 G3 X-57.176 Y-21.352 I-3.691 J4.74 E.0458 G2 X-55.538 Y-21.1 I1.056 J-1.418 E.05721 G2 X-54.555 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-52.917 Y-22.317 I1.056 J1.418 E.05721 G3 X-51.935 Y-21.352 I-3.691 J4.74 E.0458 G2 X-50.297 Y-21.1 I1.056 J-1.418 E.05721 G2 X-49.314 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-47.676 Y-22.317 I1.056 J1.418 E.05721 G3 X-46.693 Y-21.352 I-3.691 J4.74 E.0458 G2 X-45.055 Y-21.1 I1.056 J-1.418 E.05721 G2 X-44.073 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-42.435 Y-22.317 I1.056 J1.418 E.05721 G3 X-41.452 Y-21.352 I-3.692 J4.74 E.0458 G2 X-39.814 Y-21.1 I1.056 J-1.418 E.05721 G2 X-38.831 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-37.193 Y-22.317 I1.056 J1.418 E.05721 G3 X-36.211 Y-21.352 I-3.691 J4.74 E.0458 G2 X-34.573 Y-21.1 I1.056 J-1.418 E.05721 G2 X-33.59 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-31.952 Y-22.317 I1.056 J1.418 E.05721 G3 X-30.969 Y-21.352 I-3.691 J4.74 E.0458 G2 X-29.331 Y-21.1 I1.056 J-1.418 E.05721 G2 X-28.349 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-26.711 Y-22.317 I1.056 J1.418 E.05721 G3 X-25.728 Y-21.352 I-3.691 J4.74 E.0458 G2 X-24.09 Y-21.1 I1.056 J-1.418 E.05721 G2 X-23.107 Y-22.065 I-3.691 J-4.74 E.0458 G3 X-21.47 Y-22.317 I1.056 J1.418 E.05721 G3 X-20.713 Y-21.59 I-2.77 J3.64 E.03487 G1 X-20.713 Y-18.443 E.10442 G3 X-21.797 Y-19.444 I1.793 J-3.028 E.04933 G2 X-23.435 Y-19.696 I-1.056 J1.418 E.05721 G2 X-24.418 Y-18.731 I3.691 J4.74 E.0458 G3 X-26.056 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-27.038 Y-19.444 I3.691 J-4.74 E.0458 G2 X-28.676 Y-19.696 I-1.056 J1.418 E.05721 G2 X-29.659 Y-18.731 I3.691 J4.74 E.0458 G3 X-31.297 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-32.28 Y-19.444 I3.691 J-4.74 E.0458 G2 X-33.918 Y-19.696 I-1.056 J1.418 E.05721 G2 X-34.9 Y-18.731 I3.691 J4.74 E.0458 G3 X-36.538 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-37.521 Y-19.444 I3.691 J-4.74 E.0458 G2 X-39.159 Y-19.696 I-1.056 J1.418 E.05721 G2 X-40.142 Y-18.731 I3.691 J4.74 E.0458 G3 X-41.78 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-42.762 Y-19.444 I3.691 J-4.74 E.0458 G2 X-44.4 Y-19.696 I-1.056 J1.418 E.05721 G2 X-45.383 Y-18.731 I3.691 J4.74 E.0458 G3 X-47.021 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-48.004 Y-19.444 I3.692 J-4.74 E.0458 G2 X-49.642 Y-19.696 I-1.056 J1.418 E.05721 G2 X-50.624 Y-18.731 I3.691 J4.74 E.0458 G3 X-52.262 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-53.245 Y-19.444 I3.691 J-4.74 E.0458 G2 X-54.883 Y-19.696 I-1.056 J1.418 E.05721 G2 X-55.866 Y-18.731 I3.691 J4.74 E.0458 G3 X-57.504 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-58.486 Y-19.444 I3.691 J-4.74 E.0458 G2 X-60.124 Y-19.696 I-1.056 J1.418 E.05721 G2 X-61.107 Y-18.731 I3.692 J4.74 E.0458 G3 X-62.745 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-63.728 Y-19.444 I3.691 J-4.74 E.0458 G2 X-65.365 Y-19.696 I-1.056 J1.418 E.05721 G2 X-66.348 Y-18.731 I3.691 J4.74 E.0458 G3 X-67.986 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-68.969 Y-19.444 I3.691 J-4.74 E.0458 G2 X-70.607 Y-19.696 I-1.056 J1.418 E.05721 G2 X-71.59 Y-18.731 I3.691 J4.74 E.0458 G3 X-73.227 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-74.21 Y-19.444 I3.691 J-4.74 E.0458 G2 X-75.848 Y-19.696 I-1.056 J1.418 E.05721 G2 X-76.831 Y-18.731 I3.691 J4.74 E.0458 G3 X-78.469 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-79.451 Y-19.444 I3.691 J-4.74 E.0458 G2 X-81.089 Y-19.696 I-1.056 J1.418 E.05721 G2 X-82.072 Y-18.731 I3.691 J4.74 E.0458 G3 X-83.71 Y-18.479 I-1.056 J-1.418 E.05721 G3 X-84.187 Y-18.911 I1.632 J-2.282 E.02139 G1 X-84.187 Y-16.926 E.06583 G3 X-83.382 Y-16.11 I-3.134 J3.893 E.0381 G2 X-81.745 Y-15.858 I1.056 J-1.418 E.05721 G2 X-80.762 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-79.124 Y-17.076 I1.056 J1.418 E.05721 G3 X-78.141 Y-16.11 I-3.691 J4.74 E.0458 G2 X-76.503 Y-15.858 I1.056 J-1.418 E.05721 G2 X-75.52 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-73.883 Y-17.076 I1.056 J1.418 E.05721 G3 X-72.9 Y-16.11 I-3.692 J4.74 E.0458 G2 X-71.262 Y-15.858 I1.056 J-1.418 E.05721 G2 X-70.279 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-68.641 Y-17.076 I1.056 J1.418 E.05721 G3 X-67.659 Y-16.11 I-3.691 J4.74 E.0458 G2 X-66.021 Y-15.858 I1.056 J-1.418 E.05721 G2 X-65.038 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-63.4 Y-17.076 I1.056 J1.418 E.05721 G3 X-62.417 Y-16.11 I-3.691 J4.74 E.0458 G2 X-60.779 Y-15.858 I1.056 J-1.418 E.05721 G2 X-59.797 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-58.159 Y-17.076 I1.056 J1.418 E.05721 G3 X-57.176 Y-16.11 I-3.691 J4.74 E.0458 G2 X-55.538 Y-15.858 I1.056 J-1.418 E.05721 G2 X-54.555 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-52.917 Y-17.076 I1.056 J1.418 E.05721 G3 X-51.935 Y-16.11 I-3.691 J4.74 E.0458 G2 X-50.297 Y-15.858 I1.056 J-1.418 E.05721 G2 X-49.314 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-47.676 Y-17.076 I1.056 J1.418 E.05721 G3 X-46.693 Y-16.11 I-3.691 J4.74 E.0458 G2 X-45.055 Y-15.858 I1.056 J-1.418 E.05721 G2 X-44.073 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-42.435 Y-17.076 I1.056 J1.418 E.05721 G3 X-41.452 Y-16.11 I-3.692 J4.74 E.0458 G2 X-39.814 Y-15.858 I1.056 J-1.418 E.05721 G2 X-38.831 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-37.193 Y-17.076 I1.056 J1.418 E.05721 G3 X-36.211 Y-16.11 I-3.691 J4.74 E.0458 G2 X-34.573 Y-15.858 I1.056 J-1.418 E.05721 G2 X-33.59 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-31.952 Y-17.076 I1.056 J1.418 E.05721 G3 X-30.969 Y-16.11 I-3.691 J4.74 E.0458 G2 X-29.331 Y-15.858 I1.056 J-1.418 E.05721 G2 X-28.349 Y-16.824 I-3.692 J-4.74 E.0458 G3 X-26.711 Y-17.076 I1.056 J1.418 E.05721 G3 X-25.728 Y-16.11 I-3.691 J4.74 E.0458 G2 X-24.09 Y-15.858 I1.056 J-1.418 E.05721 G2 X-23.107 Y-16.824 I-3.691 J-4.74 E.0458 G3 X-21.47 Y-17.076 I1.056 J1.418 E.05721 G3 X-20.713 Y-16.349 I-2.77 J3.64 E.03487 G1 X-20.713 Y-13.201 E.10442 G3 X-21.797 Y-14.203 I1.793 J-3.028 E.04933 G2 X-23.435 Y-14.455 I-1.056 J1.418 E.05721 G2 X-24.418 Y-13.49 I3.691 J4.74 E.0458 G3 X-26.056 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-27.038 Y-14.203 I3.691 J-4.74 E.0458 G2 X-28.676 Y-14.455 I-1.056 J1.418 E.05721 G2 X-29.659 Y-13.49 I3.691 J4.74 E.0458 G3 X-31.297 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-32.28 Y-14.203 I3.691 J-4.74 E.0458 G2 X-33.918 Y-14.455 I-1.056 J1.418 E.05721 G2 X-34.9 Y-13.49 I3.691 J4.74 E.0458 G3 X-36.538 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-37.521 Y-14.203 I3.691 J-4.74 E.0458 G2 X-39.159 Y-14.455 I-1.056 J1.418 E.05721 G2 X-40.142 Y-13.49 I3.691 J4.74 E.0458 G3 X-41.78 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-42.762 Y-14.203 I3.691 J-4.74 E.0458 G2 X-44.4 Y-14.455 I-1.056 J1.418 E.05721 G2 X-45.383 Y-13.49 I3.691 J4.74 E.0458 G3 X-47.021 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-48.004 Y-14.203 I3.692 J-4.74 E.0458 G2 X-49.642 Y-14.455 I-1.056 J1.418 E.05721 G2 X-50.624 Y-13.49 I3.691 J4.74 E.0458 G3 X-52.262 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-53.245 Y-14.203 I3.691 J-4.74 E.0458 G2 X-54.883 Y-14.455 I-1.056 J1.418 E.05721 G2 X-55.866 Y-13.49 I3.691 J4.74 E.0458 G3 X-57.504 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-58.486 Y-14.203 I3.691 J-4.74 E.0458 G2 X-60.124 Y-14.455 I-1.056 J1.418 E.05721 G2 X-61.107 Y-13.49 I3.691 J4.74 E.0458 G3 X-62.745 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-63.728 Y-14.203 I3.691 J-4.74 E.0458 G2 X-65.365 Y-14.455 I-1.056 J1.418 E.05721 G2 X-66.348 Y-13.49 I3.691 J4.74 E.0458 G3 X-67.986 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-68.969 Y-14.203 I3.691 J-4.74 E.0458 G2 X-70.607 Y-14.455 I-1.056 J1.418 E.05721 G2 X-71.59 Y-13.49 I3.691 J4.74 E.0458 G3 X-73.227 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-74.21 Y-14.203 I3.691 J-4.74 E.0458 G2 X-75.848 Y-14.455 I-1.056 J1.418 E.05721 G2 X-76.831 Y-13.49 I3.691 J4.74 E.0458 G3 X-78.469 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-79.451 Y-14.203 I3.691 J-4.74 E.0458 G2 X-81.089 Y-14.455 I-1.056 J1.418 E.05721 G2 X-82.072 Y-13.49 I3.691 J4.74 E.0458 G3 X-83.71 Y-13.238 I-1.056 J-1.418 E.05721 G3 X-84.187 Y-13.669 I1.632 J-2.282 E.02139 G1 X-84.187 Y-11.737 E.06411 G1 X-84.249 Y-11.737 E.00205 G3 X-83.382 Y-10.869 I-3.327 J4.187 E.04077 G2 X-81.745 Y-10.617 I1.056 J-1.418 E.05721 G2 X-80.762 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-79.124 Y-11.834 I1.056 J1.418 E.05721 G3 X-78.141 Y-10.869 I-3.691 J4.74 E.0458 G2 X-76.503 Y-10.617 I1.056 J-1.418 E.05721 G2 X-75.52 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-73.883 Y-11.834 I1.056 J1.418 E.05721 G3 X-72.9 Y-10.869 I-3.692 J4.74 E.0458 G2 X-71.262 Y-10.617 I1.056 J-1.418 E.05721 G2 X-70.279 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-68.641 Y-11.834 I1.056 J1.418 E.05721 G3 X-67.659 Y-10.869 I-3.691 J4.74 E.0458 G2 X-66.021 Y-10.617 I1.056 J-1.418 E.05721 G2 X-65.038 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-63.4 Y-11.834 I1.056 J1.418 E.05721 G3 X-62.417 Y-10.869 I-3.691 J4.74 E.0458 G2 X-60.779 Y-10.617 I1.056 J-1.418 E.05721 G2 X-59.797 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-58.159 Y-11.834 I1.056 J1.418 E.05721 G3 X-57.176 Y-10.869 I-3.691 J4.74 E.0458 G2 X-55.538 Y-10.617 I1.056 J-1.418 E.05721 G2 X-54.555 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-52.917 Y-11.834 I1.056 J1.418 E.05721 G3 X-51.935 Y-10.869 I-3.691 J4.74 E.0458 G2 X-50.297 Y-10.617 I1.056 J-1.418 E.05721 G2 X-49.314 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-47.676 Y-11.834 I1.056 J1.418 E.05721 G3 X-46.693 Y-10.869 I-3.691 J4.74 E.0458 G2 X-45.055 Y-10.617 I1.056 J-1.418 E.05721 G2 X-44.073 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-42.435 Y-11.834 I1.056 J1.418 E.05721 G3 X-41.452 Y-10.869 I-3.692 J4.74 E.0458 G2 X-39.814 Y-10.617 I1.056 J-1.418 E.05721 G2 X-38.831 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-37.193 Y-11.834 I1.056 J1.418 E.05721 G3 X-36.211 Y-10.869 I-3.691 J4.74 E.0458 G2 X-34.573 Y-10.617 I1.056 J-1.418 E.05721 G2 X-33.59 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-31.952 Y-11.834 I1.056 J1.418 E.05721 G3 X-30.969 Y-10.869 I-3.691 J4.74 E.0458 G2 X-29.331 Y-10.617 I1.056 J-1.418 E.05721 G2 X-28.349 Y-11.582 I-3.692 J-4.74 E.0458 G3 X-26.711 Y-11.834 I1.056 J1.418 E.05721 G3 X-25.728 Y-10.869 I-3.691 J4.74 E.0458 G2 X-24.09 Y-10.617 I1.056 J-1.418 E.05721 G2 X-23.107 Y-11.582 I-3.691 J-4.74 E.0458 G3 X-21.47 Y-11.834 I1.056 J1.418 E.05721 G3 X-20.487 Y-10.869 I-3.691 J4.74 E.0458 G1 X-19.661 Y-10.502 E.02999 G2 X-19.238 Y-8.218 I3.828 J.473 E.07828 G3 X-20.814 Y-7.996 I-1.001 J-1.407 E.05488 G3 X-21.797 Y-8.962 I3.691 J-4.74 E.0458 G2 X-23.435 Y-9.214 I-1.056 J1.418 E.05721 G2 X-24.418 Y-8.248 I3.691 J4.74 E.0458 G3 X-26.056 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-27.038 Y-8.962 I3.691 J-4.74 E.0458 G2 X-28.676 Y-9.214 I-1.056 J1.418 E.05721 G2 X-29.659 Y-8.248 I3.691 J4.74 E.0458 G3 X-31.297 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-32.28 Y-8.962 I3.691 J-4.74 E.0458 G2 X-33.918 Y-9.214 I-1.056 J1.418 E.05721 G2 X-34.9 Y-8.248 I3.691 J4.74 E.0458 G3 X-36.538 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-37.521 Y-8.962 I3.691 J-4.74 E.0458 G2 X-39.159 Y-9.214 I-1.056 J1.418 E.05721 G2 X-40.142 Y-8.248 I3.691 J4.74 E.0458 G1 X-40.529 Y-8.054 E.01437 G2 X-42.851 Y-9.006 I-1.961 J1.474 E.0874 G2 X-44.728 Y-8.939 I-.9 J1.092 E.0681 G1 X-45.383 Y-8.248 E.03159 G3 X-47.021 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-48.004 Y-8.962 I3.691 J-4.74 E.0458 G2 X-49.642 Y-9.214 I-1.056 J1.418 E.05721 G2 X-50.624 Y-8.248 I3.691 J4.74 E.0458 G3 X-52.262 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-53.245 Y-8.962 I3.691 J-4.74 E.0458 G2 X-54.883 Y-9.214 I-1.056 J1.418 E.05721 G2 X-55.866 Y-8.248 I3.691 J4.74 E.0458 G3 X-57.504 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-58.486 Y-8.962 I3.691 J-4.74 E.0458 G2 X-60.124 Y-9.214 I-1.056 J1.418 E.05721 G2 X-60.903 Y-8.463 I2.862 J3.75 E.03596 G3 X-60.227 Y-5.887 I-1.633 J1.806 E.09347 G3 X-58.159 Y-6.593 I1.489 J.981 E.07802 G3 X-57.176 Y-5.628 I-3.691 J4.74 E.0458 G2 X-55.538 Y-5.376 I1.056 J-1.418 E.05721 G2 X-54.555 Y-6.341 I-3.691 J-4.74 E.0458 G3 X-52.917 Y-6.593 I1.056 J1.418 E.05721 G3 X-51.935 Y-5.628 I-3.691 J4.74 E.0458 G2 X-50.297 Y-5.376 I1.056 J-1.418 E.05721 G2 X-49.314 Y-6.341 I-3.691 J-4.74 E.0458 G3 X-47.676 Y-6.593 I1.056 J1.418 E.05721 G3 X-46.693 Y-5.628 I-3.691 J4.74 E.0458 G2 X-45.055 Y-5.376 I1.056 J-1.418 E.05721 G2 X-44.627 Y-5.757 I-1.436 J-2.047 E.01906 G2 X-40.544 Y-5.284 I2.177 J-.929 E.16516 G2 X-39.487 Y-5.65 I.221 J-1.071 E.03897 G1 X-38.831 Y-6.341 E.03159 G3 X-37.193 Y-6.593 I1.056 J1.418 E.05721 G3 X-36.211 Y-5.628 I-3.691 J4.74 E.0458 G2 X-34.573 Y-5.376 I1.056 J-1.418 E.05721 G2 X-33.59 Y-6.341 I-3.691 J-4.74 E.0458 G3 X-31.952 Y-6.593 I1.056 J1.418 E.05721 G3 X-30.969 Y-5.628 I-3.691 J4.74 E.0458 G2 X-29.331 Y-5.376 I1.056 J-1.418 E.05721 G2 X-28.349 Y-6.341 I-3.692 J-4.74 E.0458 G3 X-26.711 Y-6.593 I1.056 J1.418 E.05721 G3 X-25.728 Y-5.628 I-3.691 J4.74 E.0458 G2 X-24.09 Y-5.376 I1.056 J-1.418 E.05721 G2 X-23.107 Y-6.341 I-3.691 J-4.74 E.0458 G3 X-21.47 Y-6.593 I1.056 J1.418 E.05721 G3 X-20.487 Y-5.628 I-3.691 J4.74 E.0458 G1 X-20.213 Y-5.491 E.01015 G1 X-20.213 Y-2.655 E.09407 G3 X-21.142 Y-3.029 I-.123 J-1.034 E.03466 G1 X-21.797 Y-3.72 E.03159 G2 X-23.435 Y-3.972 I-1.056 J1.418 E.05721 G2 X-24.418 Y-3.007 I3.691 J4.74 E.0458 G3 X-26.056 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-27.038 Y-3.72 I3.691 J-4.74 E.0458 G2 X-28.676 Y-3.972 I-1.056 J1.418 E.05721 G2 X-29.659 Y-3.007 I3.691 J4.74 E.0458 G3 X-31.297 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-32.28 Y-3.72 I3.691 J-4.74 E.0458 G2 X-33.918 Y-3.972 I-1.056 J1.418 E.05721 G2 X-34.9 Y-3.007 I3.691 J4.74 E.0458 G3 X-36.538 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-37.521 Y-3.72 I3.691 J-4.74 E.0458 G2 X-39.159 Y-3.972 I-1.056 J1.418 E.05721 G2 X-40.142 Y-3.007 I3.691 J4.74 E.0458 G3 X-41.78 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-42.762 Y-3.72 I3.691 J-4.74 E.0458 G2 X-44.4 Y-3.972 I-1.056 J1.418 E.05721 G2 X-45.383 Y-3.007 I3.691 J4.74 E.0458 G3 X-47.021 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-48.004 Y-3.72 I3.692 J-4.74 E.0458 G2 X-49.642 Y-3.972 I-1.056 J1.418 E.05721 G2 X-50.624 Y-3.007 I3.691 J4.74 E.0458 G3 X-52.262 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-53.245 Y-3.72 I3.691 J-4.74 E.0458 G2 X-54.883 Y-3.972 I-1.056 J1.418 E.05721 G2 X-55.866 Y-3.007 I3.691 J4.74 E.0458 G3 X-57.504 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-58.486 Y-3.72 I3.691 J-4.74 E.0458 G2 X-60.124 Y-3.972 I-1.056 J1.418 E.05721 G2 X-61.107 Y-3.007 I3.692 J4.74 E.0458 G3 X-62.745 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-63.728 Y-3.72 I3.691 J-4.74 E.0458 G2 X-65.365 Y-3.972 I-1.056 J1.418 E.05721 G2 X-66.348 Y-3.007 I3.691 J4.74 E.0458 G3 X-67.986 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-68.969 Y-3.72 I3.691 J-4.74 E.0458 G2 X-70.607 Y-3.972 I-1.056 J1.418 E.05721 G2 X-71.59 Y-3.007 I3.691 J4.74 E.0458 G3 X-73.227 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-74.21 Y-3.72 I3.691 J-4.74 E.0458 G2 X-75.848 Y-3.972 I-1.056 J1.418 E.05721 G2 X-76.831 Y-3.007 I3.691 J4.74 E.0458 G3 X-78.469 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-79.451 Y-3.72 I3.691 J-4.74 E.0458 G2 X-81.089 Y-3.972 I-1.056 J1.418 E.05721 G2 X-82.072 Y-3.007 I3.691 J4.74 E.0458 G3 X-83.71 Y-2.755 I-1.056 J-1.418 E.05721 G3 X-84.687 Y-3.714 I3.667 J-4.712 E.04552 G1 X-84.687 Y-6.709 E.09933 G3 X-84.038 Y-6.319 I-.206 J1.078 E.02565 G1 X-83.382 Y-5.628 E.03159 G2 X-81.745 Y-5.376 I1.056 J-1.418 E.05721 G2 X-80.762 Y-6.341 I-3.691 J-4.74 E.0458 G3 X-79.124 Y-6.593 I1.056 J1.418 E.05721 G3 X-78.141 Y-5.628 I-3.691 J4.74 E.0458 G2 X-76.503 Y-5.376 I1.056 J-1.418 E.05721 G2 X-75.52 Y-6.341 I-3.691 J-4.74 E.0458 G3 X-73.883 Y-6.593 I1.056 J1.418 E.05721 G3 X-72.9 Y-5.628 I-3.692 J4.74 E.0458 G2 X-71.262 Y-5.376 I1.056 J-1.418 E.05721 G2 X-70.279 Y-6.341 I-3.691 J-4.74 E.0458 G3 X-68.641 Y-6.593 I1.056 J1.418 E.05721 G3 X-67.659 Y-5.628 I-3.691 J4.74 E.0458 G2 X-66.021 Y-5.376 I1.056 J-1.418 E.05721 G2 X-65.038 Y-6.341 I-3.691 J-4.74 E.0458 G1 X-64.801 Y-6.459 E.00877 G3 X-63.547 Y-8.771 I2.438 J-.173 E.09212 G1 X-63.728 Y-8.962 E.00871 G2 X-65.365 Y-9.214 I-1.056 J1.418 E.05721 G2 X-66.348 Y-8.248 I3.691 J4.74 E.0458 G3 X-67.986 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-68.969 Y-8.962 I3.691 J-4.74 E.0458 G2 X-70.607 Y-9.214 I-1.056 J1.418 E.05721 G2 X-71.59 Y-8.248 I3.691 J4.74 E.0458 G3 X-73.227 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-74.21 Y-8.962 I3.691 J-4.74 E.0458 G2 X-75.848 Y-9.214 I-1.056 J1.418 E.05721 G2 X-76.831 Y-8.248 I3.691 J4.74 E.0458 G3 X-78.469 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-79.451 Y-8.962 I3.691 J-4.74 E.0458 G2 X-81.089 Y-9.214 I-1.056 J1.418 E.05721 G2 X-82.072 Y-8.248 I3.691 J4.74 E.0458 G3 X-83.71 Y-7.996 I-1.056 J-1.418 E.05721 G3 X-84.693 Y-8.962 I3.691 J-4.74 E.0458 G1 X-85.287 Y-9.259 E.02204 G3 X-85.938 Y-7.782 I-3.798 J-.79 E.05394 G1 X-89.931 Y-6.85 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.491326 G1 F15000 G1 X-89.931 Y-7.306 E.01666 G1 X-90.411 Y-7.517 E.01918 G1 X-90.471 Y-7.561 E.0027 G1 X-90.471 Y-7.06 E.01832 G1 X-89.968 Y-6.865 E.01971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.139 Y-8.245 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.485641 G1 F15000 G2 X-85.729 Y-9.211 I-2.982 J-1.834 E.03801 G1 X-85.635 Y-9.928 E.02608 G2 X-86.01 Y-11.52 I-3.366 J-.047 E.05963 G1 X-86.51 Y-11.52 E.01805 G1 X-86.179 Y-10.772 E.02952 G1 X-86.073 Y-10.029 E.02709 G1 X-86.164 Y-9.283 E.02709 G1 X-86.446 Y-8.587 E.02709 G1 X-86.862 Y-8.03 E.02509 G1 X-87.288 Y-7.676 E.01998 G1 X-86.59 Y-7.676 E.02519 G1 X-86.164 Y-8.213 E.02474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.713 Y-5.116 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-89.713 Y-3.487 E.05401 G1 X-89.934 Y-3.72 E.01065 G1 X-90.687 Y-4.055 E.02732 G1 X-90.687 Y-1.379 E.08876 G1 X-89.934 Y-1.469 E.02515 G1 X-89.607 Y-1.352 E.01155 G3 X-88.624 Y-.386 I-3.691 J4.74 E.0458 G2 X-87.313 Y-.017 I1.092 J-1.363 E.04639 G1 X-86.986 Y-.134 E.01155 G2 X-86.003 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-84.693 Y-1.469 I1.092 J1.363 E.04639 G1 X-84.365 Y-1.352 E.01155 G3 X-83.382 Y-.386 I-3.691 J4.74 E.0458 G2 X-82.072 Y-.017 I1.092 J-1.363 E.04639 G1 X-81.745 Y-.134 E.01155 G2 X-80.762 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-79.451 Y-1.469 I1.092 J1.363 E.04639 G1 X-79.124 Y-1.352 E.01155 G3 X-78.141 Y-.386 I-3.691 J4.74 E.0458 G2 X-76.831 Y-.017 I1.092 J-1.363 E.04639 G1 X-76.503 Y-.134 E.01155 G2 X-75.52 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-74.21 Y-1.469 I1.092 J1.363 E.04639 G1 X-73.883 Y-1.352 E.01155 G3 X-72.9 Y-.386 I-3.691 J4.74 E.0458 G2 X-71.59 Y-.017 I1.092 J-1.363 E.04639 G1 X-71.262 Y-.134 E.01155 G2 X-70.279 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-68.969 Y-1.469 I1.092 J1.363 E.04639 G1 X-68.641 Y-1.352 E.01155 G3 X-67.659 Y-.386 I-3.691 J4.74 E.0458 G2 X-66.348 Y-.017 I1.092 J-1.363 E.04639 G1 X-66.021 Y-.134 E.01155 G2 X-65.038 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-63.728 Y-1.469 I1.092 J1.363 E.04639 G1 X-63.4 Y-1.352 E.01155 G3 X-62.417 Y-.386 I-3.691 J4.74 E.0458 G2 X-61.107 Y-.017 I1.092 J-1.363 E.04639 G1 X-60.779 Y-.134 E.01155 G2 X-59.797 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-58.486 Y-1.469 I1.092 J1.363 E.04639 G1 X-58.159 Y-1.352 E.01155 G3 X-57.176 Y-.386 I-3.691 J4.74 E.0458 G2 X-55.866 Y-.017 I1.092 J-1.363 E.04639 G1 X-55.538 Y-.134 E.01155 G2 X-54.555 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-53.245 Y-1.469 I1.092 J1.363 E.04639 G1 X-52.917 Y-1.352 E.01155 G3 X-51.935 Y-.386 I-3.691 J4.74 E.0458 G2 X-50.624 Y-.017 I1.092 J-1.363 E.04639 G1 X-50.297 Y-.134 E.01155 G2 X-49.314 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-48.004 Y-1.469 I1.092 J1.363 E.04639 G1 X-47.676 Y-1.352 E.01155 G3 X-46.693 Y-.386 I-3.691 J4.74 E.0458 G2 X-45.383 Y-.017 I1.092 J-1.363 E.04639 G1 X-45.055 Y-.134 E.01155 G2 X-44.073 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-42.762 Y-1.469 I1.092 J1.363 E.04639 G1 X-42.435 Y-1.352 E.01155 G3 X-41.452 Y-.386 I-3.691 J4.74 E.0458 G2 X-40.142 Y-.017 I1.092 J-1.363 E.04639 G1 X-39.814 Y-.134 E.01155 G2 X-38.831 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-37.521 Y-1.469 I1.092 J1.363 E.04639 G1 X-37.193 Y-1.352 E.01155 G3 X-36.211 Y-.386 I-3.691 J4.74 E.0458 G2 X-34.9 Y-.017 I1.092 J-1.363 E.04639 G1 X-34.573 Y-.134 E.01155 G2 X-33.59 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-32.28 Y-1.469 I1.092 J1.363 E.04639 G1 X-31.952 Y-1.352 E.01155 G3 X-30.969 Y-.386 I-3.691 J4.74 E.0458 G2 X-29.659 Y-.017 I1.092 J-1.363 E.04639 G1 X-29.331 Y-.134 E.01155 G2 X-28.349 Y-1.1 I-3.692 J-4.74 E.0458 G3 X-27.038 Y-1.469 I1.092 J1.363 E.04639 G1 X-26.711 Y-1.352 E.01155 G3 X-25.728 Y-.386 I-3.691 J4.74 E.0458 G2 X-24.418 Y-.017 I1.092 J-1.363 E.04639 G1 X-24.09 Y-.134 E.01155 G2 X-23.107 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-21.797 Y-1.469 I1.092 J1.363 E.04639 G1 X-21.47 Y-1.352 E.01155 G3 X-20.487 Y-.386 I-3.691 J4.74 E.0458 G2 X-19.176 Y-.017 I1.092 J-1.363 E.04639 G1 X-18.849 Y-.134 E.01155 G2 X-17.866 Y-1.1 I-3.691 J-4.74 E.0458 G3 X-16.556 Y-1.469 I1.092 J1.363 E.04639 G1 X-16.228 Y-1.352 E.01155 G3 X-15.245 Y-.386 I-3.691 J4.74 E.0458 G1 X-14.59 Y-.058 E.0243 G1 X-14.213 Y-.034 E.01254 G1 X-14.213 Y2.373 E.07987 G1 X-14.59 Y2.562 E.01399 G1 X-15.245 Y2.604 E.02178 G1 X-15.573 Y2.486 E.01155 G3 X-16.556 Y1.521 I3.692 J-4.74 E.0458 G2 X-17.866 Y1.151 I-1.092 J1.363 E.04639 G1 X-18.194 Y1.269 E.01155 G2 X-19.176 Y2.234 I3.691 J4.74 E.0458 G3 X-20.487 Y2.604 I-1.092 J-1.363 E.04639 G1 X-20.814 Y2.486 E.01155 G3 X-21.797 Y1.521 I3.691 J-4.74 E.0458 G2 X-23.107 Y1.151 I-1.092 J1.363 E.04639 G1 X-23.435 Y1.269 E.01155 G2 X-24.418 Y2.234 I3.691 J4.74 E.0458 G3 X-25.728 Y2.604 I-1.092 J-1.363 E.04639 G1 X-26.056 Y2.486 E.01155 G3 X-27.038 Y1.521 I3.691 J-4.74 E.0458 G2 X-28.349 Y1.151 I-1.092 J1.363 E.04639 G1 X-28.676 Y1.269 E.01155 G2 X-29.659 Y2.234 I3.691 J4.74 E.0458 G3 X-30.969 Y2.604 I-1.092 J-1.363 E.04639 G1 X-31.297 Y2.486 E.01155 G3 X-32.28 Y1.521 I3.691 J-4.74 E.0458 G2 X-33.59 Y1.151 I-1.092 J1.363 E.04639 G1 X-33.918 Y1.269 E.01155 G2 X-34.9 Y2.234 I3.691 J4.74 E.0458 G3 X-36.211 Y2.604 I-1.092 J-1.363 E.04639 G1 X-36.538 Y2.486 E.01155 G3 X-37.521 Y1.521 I3.691 J-4.74 E.0458 G2 X-38.831 Y1.151 I-1.092 J1.363 E.04639 G1 X-39.159 Y1.269 E.01155 G2 X-40.142 Y2.234 I3.691 J4.74 E.0458 G3 X-41.452 Y2.604 I-1.092 J-1.363 E.04639 G1 X-41.78 Y2.486 E.01155 G3 X-42.762 Y1.521 I3.691 J-4.74 E.0458 G2 X-44.073 Y1.151 I-1.092 J1.363 E.04639 G1 X-44.4 Y1.269 E.01155 G2 X-45.383 Y2.234 I3.691 J4.74 E.0458 G3 X-46.693 Y2.604 I-1.092 J-1.363 E.04639 G1 X-47.021 Y2.486 E.01155 G3 X-48.004 Y1.521 I3.692 J-4.74 E.0458 G2 X-49.314 Y1.151 I-1.092 J1.363 E.04639 G1 X-49.642 Y1.269 E.01155 G2 X-50.624 Y2.234 I3.691 J4.74 E.0458 G3 X-51.935 Y2.604 I-1.092 J-1.363 E.04639 G1 X-52.262 Y2.486 E.01155 G3 X-53.245 Y1.521 I3.691 J-4.74 E.0458 G2 X-54.555 Y1.151 I-1.092 J1.363 E.04639 G1 X-54.883 Y1.269 E.01155 G2 X-55.866 Y2.234 I3.691 J4.74 E.0458 G3 X-57.176 Y2.604 I-1.092 J-1.363 E.04639 G1 X-57.504 Y2.486 E.01155 G3 X-58.486 Y1.521 I3.691 J-4.74 E.0458 G2 X-59.797 Y1.151 I-1.092 J1.363 E.04639 G1 X-60.124 Y1.269 E.01155 G2 X-61.107 Y2.234 I3.692 J4.74 E.0458 G3 X-62.417 Y2.604 I-1.092 J-1.363 E.04639 G1 X-62.745 Y2.486 E.01155 G3 X-63.728 Y1.521 I3.691 J-4.74 E.0458 G2 X-65.038 Y1.151 I-1.092 J1.363 E.04639 G1 X-65.365 Y1.269 E.01155 G2 X-66.348 Y2.234 I3.691 J4.74 E.0458 G3 X-67.659 Y2.604 I-1.092 J-1.363 E.04639 G1 X-67.986 Y2.486 E.01155 G3 X-68.969 Y1.521 I3.691 J-4.74 E.0458 G2 X-70.279 Y1.151 I-1.092 J1.363 E.04639 G1 X-70.607 Y1.269 E.01155 G2 X-71.59 Y2.234 I3.691 J4.74 E.0458 G3 X-72.9 Y2.604 I-1.092 J-1.363 E.04639 G1 X-73.227 Y2.486 E.01155 G3 X-74.21 Y1.521 I3.691 J-4.74 E.0458 G2 X-75.52 Y1.151 I-1.092 J1.363 E.04639 G1 X-75.848 Y1.269 E.01155 G2 X-76.831 Y2.234 I3.691 J4.74 E.0458 G3 X-78.141 Y2.604 I-1.092 J-1.363 E.04639 G1 X-78.469 Y2.486 E.01155 G3 X-79.451 Y1.521 I3.691 J-4.74 E.0458 G2 X-80.762 Y1.151 I-1.092 J1.363 E.04639 G1 X-81.089 Y1.269 E.01155 G2 X-82.072 Y2.234 I3.691 J4.74 E.0458 G3 X-83.382 Y2.604 I-1.092 J-1.363 E.04639 G1 X-83.71 Y2.486 E.01155 G3 X-84.693 Y1.521 I3.691 J-4.74 E.0458 G2 X-86.003 Y1.151 I-1.092 J1.363 E.04639 G1 X-86.331 Y1.269 E.01155 G2 X-87.313 Y2.234 I3.691 J4.74 E.0458 G3 X-88.624 Y2.604 I-1.092 J-1.363 E.04639 G1 X-88.951 Y2.486 E.01155 G3 X-89.934 Y1.521 I3.691 J-4.74 E.0458 G1 X-90.687 Y1.187 E.02732 G1 X-90.687 Y3.862 E.08876 G1 X-89.934 Y3.772 E.02515 G1 X-89.607 Y3.89 E.01155 G3 X-88.624 Y4.855 I-3.691 J4.74 E.0458 G2 X-87.313 Y5.225 I1.092 J-1.363 E.04639 G1 X-86.986 Y5.107 E.01155 G2 X-86.003 Y4.141 I-3.691 J-4.74 E.0458 G3 X-84.693 Y3.772 I1.092 J1.363 E.04639 G1 X-84.365 Y3.89 E.01155 G3 X-83.382 Y4.855 I-3.691 J4.74 E.0458 G2 X-82.072 Y5.225 I1.092 J-1.363 E.04639 G1 X-81.745 Y5.107 E.01155 G2 X-80.762 Y4.141 I-3.691 J-4.74 E.0458 G3 X-79.451 Y3.772 I1.092 J1.363 E.04639 G1 X-79.124 Y3.89 E.01155 G3 X-78.141 Y4.855 I-3.691 J4.74 E.0458 G2 X-76.831 Y5.225 I1.092 J-1.363 E.04639 G1 X-76.503 Y5.107 E.01155 G2 X-75.52 Y4.141 I-3.691 J-4.74 E.0458 G3 X-74.21 Y3.772 I1.092 J1.363 E.04639 G1 X-73.883 Y3.89 E.01155 G3 X-72.9 Y4.855 I-3.691 J4.74 E.0458 G2 X-71.59 Y5.225 I1.092 J-1.363 E.04639 G1 X-71.262 Y5.107 E.01155 G2 X-70.279 Y4.141 I-3.691 J-4.74 E.0458 G3 X-68.969 Y3.772 I1.092 J1.363 E.04639 G1 X-68.641 Y3.89 E.01155 G3 X-67.659 Y4.855 I-3.691 J4.74 E.0458 G2 X-66.348 Y5.225 I1.092 J-1.363 E.04639 G1 X-66.021 Y5.107 E.01155 G2 X-65.038 Y4.141 I-3.691 J-4.74 E.0458 G3 X-63.728 Y3.772 I1.092 J1.363 E.04639 G1 X-63.4 Y3.89 E.01155 G3 X-62.417 Y4.855 I-3.691 J4.74 E.0458 G2 X-61.107 Y5.225 I1.092 J-1.363 E.04639 G1 X-60.779 Y5.107 E.01155 G2 X-59.797 Y4.141 I-3.691 J-4.74 E.0458 G3 X-58.486 Y3.772 I1.092 J1.363 E.04639 G1 X-58.159 Y3.89 E.01155 G3 X-57.176 Y4.855 I-3.691 J4.74 E.0458 G2 X-55.866 Y5.225 I1.092 J-1.363 E.04639 G1 X-55.538 Y5.107 E.01155 G2 X-54.555 Y4.141 I-3.691 J-4.74 E.0458 G3 X-53.245 Y3.772 I1.092 J1.363 E.04639 G1 X-52.917 Y3.89 E.01155 G3 X-51.935 Y4.855 I-3.691 J4.74 E.0458 G2 X-50.624 Y5.225 I1.092 J-1.363 E.04639 G1 X-50.297 Y5.107 E.01155 G2 X-49.314 Y4.141 I-3.691 J-4.74 E.0458 G3 X-48.004 Y3.772 I1.092 J1.363 E.04639 G1 X-47.676 Y3.89 E.01155 G3 X-46.693 Y4.855 I-3.691 J4.74 E.0458 G2 X-45.383 Y5.225 I1.092 J-1.363 E.04639 G1 X-45.055 Y5.107 E.01155 G2 X-44.073 Y4.141 I-3.691 J-4.74 E.0458 G3 X-42.762 Y3.772 I1.092 J1.363 E.04639 G1 X-42.435 Y3.89 E.01155 G3 X-41.452 Y4.855 I-3.691 J4.74 E.0458 G2 X-40.142 Y5.225 I1.092 J-1.363 E.04639 G1 X-39.814 Y5.107 E.01155 G2 X-38.831 Y4.141 I-3.691 J-4.74 E.0458 G3 X-37.521 Y3.772 I1.092 J1.363 E.04639 G1 X-37.193 Y3.89 E.01155 G3 X-36.211 Y4.855 I-3.691 J4.74 E.0458 G2 X-34.9 Y5.225 I1.092 J-1.363 E.04639 G1 X-34.573 Y5.107 E.01155 G2 X-33.59 Y4.141 I-3.691 J-4.74 E.0458 G3 X-32.28 Y3.772 I1.092 J1.363 E.04639 G1 X-31.952 Y3.89 E.01155 G3 X-30.969 Y4.855 I-3.691 J4.74 E.0458 G2 X-29.659 Y5.225 I1.092 J-1.363 E.04639 G1 X-29.331 Y5.107 E.01155 G2 X-28.349 Y4.141 I-3.691 J-4.74 E.0458 G3 X-27.038 Y3.772 I1.092 J1.363 E.04639 G1 X-26.711 Y3.89 E.01155 G3 X-25.728 Y4.855 I-3.691 J4.74 E.0458 G2 X-24.418 Y5.225 I1.092 J-1.363 E.04639 G1 X-24.09 Y5.107 E.01155 G2 X-23.107 Y4.141 I-3.691 J-4.74 E.0458 G3 X-21.797 Y3.772 I1.092 J1.363 E.04639 G1 X-21.47 Y3.89 E.01155 G3 X-20.487 Y4.855 I-3.691 J4.74 E.0458 G2 X-19.176 Y5.225 I1.092 J-1.363 E.04639 G1 X-18.849 Y5.107 E.01155 G2 X-17.866 Y4.141 I-3.691 J-4.74 E.0458 G3 X-16.556 Y3.772 I1.092 J1.363 E.04639 G1 X-16.228 Y3.89 E.01155 G3 X-15.245 Y4.855 I-3.691 J4.74 E.0458 G1 X-14.59 Y5.183 E.0243 G1 X-14.213 Y5.207 E.01254 G1 X-14.213 Y7.615 E.07987 G1 X-14.59 Y7.804 E.01399 G1 X-15.245 Y7.845 E.02178 G1 X-15.573 Y7.728 E.01155 G3 X-16.556 Y6.762 I3.692 J-4.74 E.0458 G2 X-17.866 Y6.392 I-1.092 J1.363 E.04639 G1 X-18.194 Y6.51 E.01155 G2 X-19.176 Y7.476 I3.691 J4.74 E.0458 G3 X-20.487 Y7.845 I-1.092 J-1.363 E.04639 G1 X-20.814 Y7.728 E.01155 G3 X-21.797 Y6.762 I3.691 J-4.74 E.0458 G2 X-23.107 Y6.392 I-1.092 J1.363 E.04639 G1 X-23.435 Y6.51 E.01155 G2 X-24.418 Y7.476 I3.691 J4.74 E.0458 G3 X-25.728 Y7.845 I-1.092 J-1.363 E.04639 G1 X-26.056 Y7.728 E.01155 G3 X-27.038 Y6.762 I3.691 J-4.74 E.0458 G2 X-28.349 Y6.392 I-1.092 J1.363 E.04639 G1 X-28.676 Y6.51 E.01155 G2 X-29.659 Y7.476 I3.691 J4.74 E.0458 G3 X-30.969 Y7.845 I-1.092 J-1.363 E.04639 G1 X-31.271 Y7.737 E.01064 G3 X-32.28 Y6.762 I3.13 J-4.247 E.04666 G2 X-33.59 Y6.392 I-1.092 J1.363 E.04639 G1 X-33.918 Y6.51 E.01155 G2 X-34.9 Y7.476 I3.691 J4.74 E.0458 G1 X-35.422 Y7.737 E.01936 G1 X-36.513 Y7.737 E.03617 G3 X-37.521 Y6.762 I3.13 J-4.247 E.04666 G2 X-38.831 Y6.392 I-1.092 J1.363 E.04639 G1 X-39.159 Y6.51 E.01155 G2 X-40.142 Y7.476 I3.691 J4.74 E.0458 G1 X-40.664 Y7.737 E.01936 G1 X-41.754 Y7.737 E.03617 G3 X-42.762 Y6.762 I3.13 J-4.247 E.04666 G2 X-44.073 Y6.392 I-1.092 J1.363 E.04639 G1 X-44.4 Y6.51 E.01155 G2 X-45.383 Y7.476 I3.691 J4.74 E.0458 G1 X-45.905 Y7.737 E.01936 G1 X-46.995 Y7.737 E.03617 G3 X-48.004 Y6.762 I3.13 J-4.247 E.04666 G2 X-49.314 Y6.392 I-1.092 J1.363 E.04639 G1 X-49.642 Y6.51 E.01155 G2 X-50.624 Y7.476 I3.691 J4.74 E.0458 G1 X-51.146 Y7.737 E.01936 G1 X-52.236 Y7.737 E.03617 G3 X-53.245 Y6.762 I3.13 J-4.247 E.04666 G2 X-54.555 Y6.392 I-1.092 J1.363 E.04639 G1 X-54.883 Y6.51 E.01155 G2 X-55.866 Y7.476 I3.691 J4.74 E.0458 G1 X-56.387 Y7.737 E.01936 G1 X-57.478 Y7.737 E.03617 G3 X-58.486 Y6.762 I3.13 J-4.247 E.04666 G2 X-59.797 Y6.392 I-1.092 J1.363 E.04639 G1 X-60.124 Y6.51 E.01155 G2 X-61.107 Y7.476 I3.692 J4.74 E.0458 G1 X-61.629 Y7.737 E.01936 G1 X-62.719 Y7.737 E.03617 G3 X-63.728 Y6.762 I3.13 J-4.247 E.04666 G2 X-65.038 Y6.392 I-1.092 J1.363 E.04639 G1 X-65.365 Y6.51 E.01155 G2 X-66.348 Y7.476 I3.691 J4.74 E.0458 G1 X-66.87 Y7.737 E.01936 G1 X-67.96 Y7.737 E.03617 G3 X-68.969 Y6.762 I3.13 J-4.247 E.04666 G2 X-70.279 Y6.392 I-1.092 J1.363 E.04639 G1 X-70.607 Y6.51 E.01155 G2 X-71.59 Y7.476 I3.691 J4.74 E.0458 G1 X-72.111 Y7.737 E.01936 G1 X-73.202 Y7.737 E.03617 G3 X-74.21 Y6.762 I3.13 J-4.247 E.04666 G2 X-75.52 Y6.392 I-1.092 J1.363 E.04639 G1 X-75.848 Y6.51 E.01155 G2 X-76.831 Y7.476 I3.691 J4.74 E.0458 G3 X-78.141 Y7.845 I-1.092 J-1.363 E.04639 G1 X-78.469 Y7.728 E.01155 G3 X-79.451 Y6.762 I3.691 J-4.74 E.0458 G2 X-80.762 Y6.392 I-1.092 J1.363 E.04639 G1 X-81.089 Y6.51 E.01155 G2 X-82.072 Y7.476 I3.691 J4.74 E.0458 G3 X-83.382 Y7.845 I-1.092 J-1.363 E.04639 G1 X-83.71 Y7.728 E.01155 G3 X-84.693 Y6.762 I3.691 J-4.74 E.0458 G2 X-86.003 Y6.392 I-1.092 J1.363 E.04639 G1 X-86.331 Y6.51 E.01155 G2 X-87.313 Y7.476 I3.691 J4.74 E.0458 G3 X-88.624 Y7.845 I-1.092 J-1.363 E.04639 G1 X-88.951 Y7.728 E.01155 G3 X-89.934 Y6.762 I3.691 J-4.74 E.0458 G1 X-90.687 Y6.428 E.02732 G1 X-90.687 Y8.056 E.05401 G1 X-84.687 Y20.864 F30000 G1 F16200 G1 X-84.687 Y22.492 E.05401 G2 X-83.71 Y23.452 I4.644 J-3.752 E.04552 G1 X-83.382 Y23.569 E.01155 G2 X-82.072 Y23.2 I.219 J-1.732 E.04639 G3 X-81.089 Y22.234 I4.674 J3.775 E.0458 G1 X-80.762 Y22.116 E.01155 G3 X-79.451 Y22.486 I.219 J1.732 E.04639 G2 X-78.469 Y23.452 I4.674 J-3.775 E.0458 G1 X-78.141 Y23.569 E.01155 G2 X-76.831 Y23.2 I.219 J-1.732 E.04639 G3 X-75.848 Y22.234 I4.674 J3.775 E.0458 G1 X-75.52 Y22.116 E.01155 G3 X-73.713 Y23.01 I.064 J2.145 E.06963 G1 X-73.713 Y24.997 E.06589 G2 X-74.21 Y24.737 I-.602 J.546 E.01899 G2 X-75.52 Y25.107 I-.219 J1.732 E.04639 G3 X-76.503 Y26.072 I-4.674 J-3.775 E.0458 G1 X-76.831 Y26.19 E.01155 G3 X-78.141 Y25.82 I-.219 J-1.732 E.04639 G2 X-79.124 Y24.855 I-4.674 J3.775 E.0458 G1 X-79.451 Y24.737 E.01155 G2 X-80.762 Y25.107 I-.219 J1.732 E.04639 G3 X-81.745 Y26.072 I-4.674 J-3.775 E.0458 G1 X-82.072 Y26.19 E.01155 G3 X-83.382 Y25.82 I-.219 J-1.732 E.04639 G2 X-84.365 Y24.855 I-4.674 J3.775 E.0458 G1 X-84.687 Y24.739 E.01134 G1 X-84.687 Y26.263 E.05055 G1 X-84.791 Y26.263 E.00346 G1 X-90.687 Y33.682 F30000 G1 F16200 G1 X-90.687 Y35.31 E.05401 G1 X-89.934 Y35.22 E.02515 G3 X-89.279 Y35.612 I-.206 J1.087 E.02586 G1 X-88.624 Y36.303 E.03159 G2 X-86.986 Y36.555 I1.056 J-1.418 E.05721 G2 X-86.003 Y35.589 I-3.691 J-4.74 E.0458 G3 X-84.365 Y35.337 I1.056 J1.418 E.05721 G3 X-83.382 Y36.303 I-3.691 J4.74 E.0458 G2 X-81.745 Y36.555 I1.056 J-1.418 E.05721 G2 X-80.762 Y35.589 I-3.691 J-4.74 E.0458 G3 X-79.124 Y35.337 I1.056 J1.418 E.05721 G3 X-78.141 Y36.303 I-3.691 J4.74 E.0458 G2 X-76.503 Y36.555 I1.056 J-1.418 E.05721 G2 X-75.52 Y35.589 I-3.691 J-4.74 E.0458 G3 X-73.883 Y35.337 I1.056 J1.418 E.05721 G3 X-72.9 Y36.303 I-3.691 J4.74 E.0458 G2 X-71.262 Y36.555 I1.056 J-1.418 E.05721 G2 X-70.279 Y35.589 I-3.691 J-4.74 E.0458 G3 X-68.641 Y35.337 I1.056 J1.418 E.05721 G3 X-67.659 Y36.303 I-3.691 J4.74 E.0458 G2 X-66.021 Y36.555 I1.056 J-1.418 E.05721 G2 X-65.038 Y35.589 I-3.691 J-4.74 E.0458 G3 X-63.4 Y35.337 I1.056 J1.418 E.05721 G3 X-62.417 Y36.303 I-3.691 J4.74 E.0458 G2 X-60.779 Y36.555 I1.056 J-1.418 E.05721 G2 X-59.797 Y35.589 I-3.691 J-4.74 E.0458 G3 X-58.159 Y35.337 I1.056 J1.418 E.05721 G3 X-57.176 Y36.303 I-3.691 J4.74 E.0458 G2 X-55.538 Y36.555 I1.056 J-1.418 E.05721 G2 X-54.555 Y35.589 I-3.691 J-4.74 E.0458 G3 X-52.917 Y35.337 I1.056 J1.418 E.05721 G3 X-51.935 Y36.303 I-3.691 J4.74 E.0458 G2 X-50.297 Y36.555 I1.056 J-1.418 E.05721 G2 X-49.314 Y35.589 I-3.691 J-4.74 E.0458 G3 X-47.676 Y35.337 I1.056 J1.418 E.05721 G3 X-46.693 Y36.303 I-3.691 J4.74 E.0458 G2 X-45.055 Y36.555 I1.056 J-1.418 E.05721 G2 X-44.073 Y35.589 I-3.691 J-4.74 E.0458 G3 X-42.435 Y35.337 I1.056 J1.418 E.05721 G3 X-41.452 Y36.303 I-3.691 J4.74 E.0458 G2 X-39.814 Y36.555 I1.056 J-1.418 E.05721 G2 X-38.831 Y35.589 I-3.691 J-4.74 E.0458 G3 X-37.193 Y35.337 I1.056 J1.418 E.05721 G3 X-36.211 Y36.303 I-3.691 J4.74 E.0458 G2 X-34.573 Y36.555 I1.056 J-1.418 E.05721 G2 X-33.59 Y35.589 I-3.691 J-4.74 E.0458 G3 X-31.952 Y35.337 I1.056 J1.418 E.05721 G3 X-30.969 Y36.303 I-3.691 J4.74 E.0458 G2 X-29.331 Y36.555 I1.056 J-1.418 E.05721 G2 X-28.349 Y35.589 I-3.691 J-4.74 E.0458 G3 X-26.711 Y35.337 I1.056 J1.418 E.05721 G3 X-25.728 Y36.303 I-3.691 J4.74 E.0458 G2 X-24.09 Y36.555 I1.056 J-1.418 E.05721 G2 X-23.107 Y35.589 I-3.691 J-4.74 E.0458 G3 X-21.47 Y35.337 I1.056 J1.418 E.05721 G3 X-20.487 Y36.303 I-3.691 J4.74 E.0458 G2 X-18.849 Y36.555 I1.056 J-1.418 E.05721 G2 X-17.866 Y35.589 I-3.691 J-4.74 E.0458 G3 X-16.228 Y35.337 I1.056 J1.418 E.05721 G3 X-15.245 Y36.303 I-3.691 J4.74 E.0458 G1 X-14.59 Y36.631 E.0243 G1 X-14.213 Y36.655 E.01254 G1 X-14.213 Y39.063 E.07987 G1 X-14.59 Y39.251 E.01399 G1 X-15.245 Y39.293 E.02178 G3 X-15.901 Y38.901 I.206 J-1.087 E.02586 G1 X-16.556 Y38.21 E.03159 G2 X-18.194 Y37.958 I-1.056 J1.418 E.05721 G2 X-19.176 Y38.923 I3.691 J4.74 E.0458 G3 X-20.814 Y39.175 I-1.056 J-1.418 E.05721 G3 X-21.797 Y38.21 I3.691 J-4.74 E.0458 G2 X-23.435 Y37.958 I-1.056 J1.418 E.05721 G2 X-24.418 Y38.923 I3.691 J4.74 E.0458 G3 X-26.056 Y39.175 I-1.056 J-1.418 E.05721 G3 X-27.038 Y38.21 I3.691 J-4.74 E.0458 G2 X-28.676 Y37.958 I-1.056 J1.418 E.05721 G2 X-29.659 Y38.923 I3.691 J4.74 E.0458 G3 X-31.297 Y39.175 I-1.056 J-1.418 E.05721 G3 X-32.28 Y38.21 I3.691 J-4.74 E.0458 G2 X-33.918 Y37.958 I-1.056 J1.418 E.05721 G2 X-34.9 Y38.923 I3.691 J4.74 E.0458 G3 X-36.538 Y39.175 I-1.056 J-1.418 E.05721 M73 P15 R93 G3 X-37.521 Y38.21 I3.691 J-4.74 E.0458 G2 X-39.159 Y37.958 I-1.056 J1.418 E.05721 G2 X-40.142 Y38.923 I3.691 J4.74 E.0458 G3 X-41.78 Y39.175 I-1.056 J-1.418 E.05721 G3 X-42.762 Y38.21 I3.691 J-4.74 E.0458 G2 X-44.4 Y37.958 I-1.056 J1.418 E.05721 G2 X-45.383 Y38.923 I3.691 J4.74 E.0458 G3 X-47.021 Y39.175 I-1.056 J-1.418 E.05721 G3 X-48.004 Y38.21 I3.692 J-4.74 E.0458 G2 X-49.642 Y37.958 I-1.056 J1.418 E.05721 G2 X-50.624 Y38.923 I3.691 J4.74 E.0458 G3 X-52.262 Y39.175 I-1.056 J-1.418 E.05721 G3 X-53.245 Y38.21 I3.691 J-4.74 E.0458 G2 X-54.883 Y37.958 I-1.056 J1.418 E.05721 G2 X-55.866 Y38.923 I3.691 J4.74 E.0458 G3 X-57.504 Y39.175 I-1.056 J-1.418 E.05721 G3 X-58.486 Y38.21 I3.691 J-4.74 E.0458 G2 X-60.124 Y37.958 I-1.056 J1.418 E.05721 G2 X-61.107 Y38.923 I3.692 J4.74 E.0458 G3 X-62.745 Y39.175 I-1.056 J-1.418 E.05721 G3 X-63.728 Y38.21 I3.691 J-4.74 E.0458 G2 X-65.365 Y37.958 I-1.056 J1.418 E.05721 G2 X-66.348 Y38.923 I3.691 J4.74 E.0458 G3 X-67.986 Y39.175 I-1.056 J-1.418 E.05721 G3 X-68.969 Y38.21 I3.691 J-4.74 E.0458 G2 X-70.607 Y37.958 I-1.056 J1.418 E.05721 G2 X-71.59 Y38.923 I3.691 J4.74 E.0458 G3 X-73.227 Y39.175 I-1.056 J-1.418 E.05721 G3 X-74.21 Y38.21 I3.691 J-4.74 E.0458 G2 X-75.848 Y37.958 I-1.056 J1.418 E.05721 G2 X-76.831 Y38.923 I3.691 J4.74 E.0458 G3 X-78.469 Y39.175 I-1.056 J-1.418 E.05721 G3 X-79.451 Y38.21 I3.691 J-4.74 E.0458 G2 X-81.089 Y37.958 I-1.056 J1.418 E.05721 G2 X-82.072 Y38.923 I3.691 J4.74 E.0458 G3 X-83.71 Y39.175 I-1.056 J-1.418 E.05721 G3 X-84.693 Y38.21 I3.691 J-4.74 E.0458 G2 X-86.331 Y37.958 I-1.056 J1.418 E.05721 G2 X-87.313 Y38.923 I3.691 J4.74 E.0458 G3 X-88.951 Y39.175 I-1.056 J-1.418 E.05721 G3 X-89.934 Y38.21 I3.691 J-4.74 E.0458 G1 X-90.687 Y37.876 E.02732 G1 X-90.687 Y39.504 E.05401 G1 X-90.246 Y47.025 F30000 G1 F16200 G1 X-90.687 Y46.962 E.01477 G1 X-90.687 Y45.793 E.03877 G1 X-90.589 Y45.744 E.00362 G3 X-89.292 Y46.083 I.385 J1.177 E.047 G3 X-85.36 Y45.617 I2.342 J2.938 E.13836 G1 X-85.131 Y45.73 E.00846 G3 X-84.365 Y45.82 I.279 J.929 E.0263 G3 X-83.382 Y46.785 I-3.691 J4.74 E.0458 G2 X-82.072 Y47.155 I1.092 J-1.363 E.04639 G1 X-81.745 Y47.037 E.01155 G2 X-80.762 Y46.072 I-3.691 J-4.74 E.0458 G3 X-79.451 Y45.702 I1.092 J1.363 E.04639 G1 X-79.124 Y45.82 E.01155 G3 X-78.141 Y46.785 I-3.691 J4.74 E.0458 G2 X-76.831 Y47.155 I1.092 J-1.363 E.04639 G1 X-76.503 Y47.037 E.01155 G2 X-75.52 Y46.072 I-3.691 J-4.74 E.0458 G3 X-74.21 Y45.702 I1.092 J1.363 E.04639 G1 X-73.883 Y45.82 E.01155 G3 X-72.9 Y46.785 I-3.692 J4.74 E.0458 G2 X-71.59 Y47.155 I1.092 J-1.363 E.04639 G1 X-71.262 Y47.037 E.01155 G2 X-70.279 Y46.072 I-3.691 J-4.74 E.0458 G3 X-68.969 Y45.702 I1.092 J1.363 E.04639 G1 X-68.641 Y45.82 E.01155 G3 X-67.659 Y46.785 I-3.691 J4.74 E.0458 G2 X-66.348 Y47.155 I1.092 J-1.363 E.04639 G1 X-66.021 Y47.037 E.01155 G2 X-65.038 Y46.072 I-3.691 J-4.74 E.0458 G3 X-63.728 Y45.702 I1.092 J1.363 E.04639 G1 X-63.4 Y45.82 E.01155 G3 X-62.417 Y46.785 I-3.691 J4.74 E.0458 G2 X-61.107 Y47.155 I1.092 J-1.363 E.04639 G1 X-60.779 Y47.037 E.01155 G2 X-59.797 Y46.072 I-3.691 J-4.74 E.0458 G3 X-58.486 Y45.702 I1.092 J1.363 E.04639 G1 X-58.159 Y45.82 E.01155 G3 X-57.176 Y46.785 I-3.691 J4.74 E.0458 G2 X-55.866 Y47.155 I1.092 J-1.363 E.04639 G1 X-55.538 Y47.037 E.01155 G2 X-54.555 Y46.072 I-3.691 J-4.74 E.0458 G3 X-53.245 Y45.702 I1.092 J1.363 E.04639 G1 X-52.917 Y45.82 E.01155 G3 X-51.935 Y46.785 I-3.691 J4.74 E.0458 G2 X-50.624 Y47.155 I1.092 J-1.363 E.04639 G1 X-50.297 Y47.037 E.01155 G2 X-49.314 Y46.072 I-3.691 J-4.74 E.0458 G3 X-48.004 Y45.702 I1.092 J1.363 E.04639 G1 X-47.676 Y45.82 E.01155 G3 X-46.693 Y46.785 I-3.691 J4.74 E.0458 G2 X-45.383 Y47.155 I1.092 J-1.363 E.04639 G1 X-45.055 Y47.037 E.01155 G2 X-44.073 Y46.072 I-3.691 J-4.74 E.0458 G3 X-42.762 Y45.702 I1.092 J1.363 E.04639 G1 X-42.435 Y45.82 E.01155 G3 X-41.452 Y46.785 I-3.692 J4.74 E.0458 G2 X-40.142 Y47.155 I1.092 J-1.363 E.04639 G1 X-39.814 Y47.037 E.01155 G2 X-38.831 Y46.072 I-3.691 J-4.74 E.0458 G3 X-37.521 Y45.702 I1.092 J1.363 E.04639 G1 X-37.193 Y45.82 E.01155 G3 X-36.211 Y46.785 I-3.691 J4.74 E.0458 G2 X-34.9 Y47.155 I1.092 J-1.363 E.04639 G1 X-34.573 Y47.037 E.01155 G2 X-33.59 Y46.072 I-3.691 J-4.74 E.0458 G3 X-32.28 Y45.702 I1.092 J1.363 E.04639 G1 X-31.952 Y45.82 E.01155 G3 X-30.969 Y46.785 I-3.691 J4.74 E.0458 G2 X-29.659 Y47.155 I1.092 J-1.363 E.04639 G1 X-29.331 Y47.037 E.01155 G2 X-28.349 Y46.072 I-3.692 J-4.74 E.0458 G3 X-27.038 Y45.702 I1.092 J1.363 E.04639 G1 X-26.711 Y45.82 E.01155 G3 X-25.728 Y46.785 I-3.691 J4.74 E.0458 G2 X-24.418 Y47.155 I1.092 J-1.363 E.04639 G1 X-24.09 Y47.037 E.01155 G2 X-23.107 Y46.072 I-3.691 J-4.74 E.0458 G3 X-21.797 Y45.702 I1.092 J1.363 E.04639 G3 X-20.742 Y46.516 I-.775 J2.096 E.04487 G2 X-21.683 Y48.813 I2.811 J2.492 E.08392 G2 X-23.107 Y48.323 I-1.352 J1.615 E.0511 G1 X-23.435 Y48.441 E.01155 G2 X-24.418 Y49.406 I3.691 J4.74 E.0458 G3 X-25.836 Y49.737 I-1.059 J-1.335 E.04992 G3 X-27.038 Y48.693 I1.544 J-2.992 E.05333 G2 X-28.349 Y48.323 I-1.092 J1.363 E.04639 G1 X-28.676 Y48.441 E.01155 G2 X-29.659 Y49.406 I3.691 J4.74 E.0458 G3 X-31.078 Y49.737 I-1.059 J-1.335 E.04992 G3 X-32.28 Y48.693 I1.544 J-2.992 E.05333 G2 X-33.59 Y48.323 I-1.092 J1.363 E.04639 G1 X-33.918 Y48.441 E.01155 G2 X-34.9 Y49.406 I3.691 J4.74 E.0458 G3 X-36.319 Y49.737 I-1.059 J-1.335 E.04992 G3 X-37.521 Y48.693 I1.544 J-2.992 E.05333 G2 X-38.831 Y48.323 I-1.092 J1.363 E.04639 G1 X-39.159 Y48.441 E.01155 G2 X-40.142 Y49.406 I3.691 J4.74 E.0458 G3 X-41.56 Y49.737 I-1.059 J-1.335 E.04992 G3 X-42.762 Y48.693 I1.544 J-2.992 E.05333 G2 X-44.073 Y48.323 I-1.092 J1.363 E.04639 G1 X-44.4 Y48.441 E.01155 G2 X-45.383 Y49.406 I3.691 J4.74 E.0458 G3 X-46.802 Y49.737 I-1.059 J-1.335 E.04992 G3 X-48.004 Y48.693 I1.544 J-2.992 E.05333 G2 X-49.314 Y48.323 I-1.092 J1.363 E.04639 G1 X-49.642 Y48.441 E.01155 G2 X-50.624 Y49.406 I3.691 J4.74 E.0458 G3 X-52.043 Y49.737 I-1.059 J-1.335 E.04992 G3 X-53.245 Y48.693 I1.544 J-2.992 E.05333 G2 X-54.555 Y48.323 I-1.092 J1.363 E.04639 G1 X-54.883 Y48.441 E.01155 G2 X-55.866 Y49.406 I3.691 J4.74 E.0458 G3 X-57.284 Y49.737 I-1.059 J-1.335 E.04992 G3 X-58.486 Y48.693 I1.544 J-2.992 E.05333 G2 X-59.797 Y48.323 I-1.092 J1.363 E.04639 G1 X-60.124 Y48.441 E.01155 G2 X-61.107 Y49.406 I3.691 J4.74 E.0458 G3 X-62.525 Y49.737 I-1.059 J-1.335 E.04992 G3 X-63.728 Y48.693 I1.544 J-2.992 E.05333 G2 X-65.038 Y48.323 I-1.092 J1.363 E.04639 G1 X-65.365 Y48.441 E.01155 G2 X-66.348 Y49.406 I3.691 J4.74 E.0458 G3 X-67.767 Y49.737 I-1.059 J-1.335 E.04992 G3 X-68.969 Y48.693 I1.544 J-2.992 E.05333 G2 X-70.279 Y48.323 I-1.092 J1.363 E.04639 G1 X-70.607 Y48.441 E.01155 G2 X-71.59 Y49.406 I3.691 J4.74 E.0458 G3 X-73.008 Y49.737 I-1.059 J-1.335 E.04992 G3 X-74.21 Y48.693 I1.544 J-2.992 E.05333 G2 X-75.52 Y48.323 I-1.092 J1.363 E.04639 G1 X-75.848 Y48.441 E.01155 G2 X-76.831 Y49.406 I3.691 J4.74 E.0458 G3 X-78.249 Y49.737 I-1.059 J-1.335 E.04992 G3 X-79.451 Y48.693 I1.544 J-2.992 E.05333 G2 X-80.762 Y48.323 I-1.092 J1.363 E.04639 G1 X-81.089 Y48.441 E.01155 G2 X-82.072 Y49.406 I3.691 J4.74 E.0458 G1 X-82.727 Y49.734 E.0243 G3 X-83.286 Y49.737 I-.302 J-4.386 E.01855 G2 X-83.229 Y48.629 I-3.753 J-.749 E.03692 G1 X-84.875 Y46.414 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.48743 G1 F15000 G1 X-85.529 Y46.01 E.02785 G1 X-86.072 Y45.806 E.02101 G1 X-86.588 Y45.704 E.01905 G1 X-87.311 Y45.704 E.02618 G2 X-88.283 Y45.966 I.412 J3.461 E.03659 G1 X-88.911 Y46.326 E.02622 G2 X-89.875 Y47.427 I2.52 J3.178 E.05332 ;WIDTH:0.480888 G1 X-89.965 Y47.448 E.0033 ;WIDTH:0.42037 G3 X-90.229 Y47.464 I-.165 J-.511 E.00822 G1 X-90.506 Y47.367 E.00902 G1 X-90.506 Y49.556 E.06732 G1 X-89.733 Y49.556 E.02377 G3 X-89.774 Y48.653 I3.983 J-.634 E.02786 G1 X-89.616 Y48.038 E.01952 ;WIDTH:0.440296 G1 X-89.558 Y47.864 E.00596 ;WIDTH:0.483165 G1 X-89.501 Y47.689 E.0066 G1 X-89.242 Y47.259 E.018 G1 X-88.724 Y46.735 E.02642 G1 X-88.077 Y46.354 E.02694 G1 X-87.354 Y46.152 E.02694 G1 X-86.603 Y46.144 E.02694 G1 X-85.876 Y46.334 E.02694 G1 X-85.222 Y46.701 E.02691 G1 X-84.685 Y47.226 E.02693 G1 X-84.306 Y47.874 E.02694 G1 X-84.102 Y48.596 E.02691 G1 X-84.098 Y49.311 E.02564 G1 X-84.132 Y49.528 E.00787 G1 X-83.688 Y49.528 E.01593 G2 X-83.826 Y47.906 I-3.299 J-.536 E.05899 G1 X-84.071 Y47.362 E.02138 G1 X-84.364 Y46.925 E.01886 G1 X-84.847 Y46.442 E.02451 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.364 Y46.925 G1 X-84.071 Y47.362 G1 X-83.826 Y47.906 G1 X-83.779 Y48.095 ;WIPE_END G1 X-90.14 Y49.19 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397568 G1 F15000 G1 X-90.14 Y48.653 E.01552 ;WIDTH:0.419253 G1 X-90.119 Y48.48 E.00534 ;WIDTH:0.462623 G1 X-90.099 Y48.307 E.00596 ;WIDTH:0.505992 G1 X-90.078 Y48.134 E.00657 ;WIDTH:0.527677 G1 X-90.058 Y47.961 E.00688 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.375 Y44.689 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-74.805 Y43.154 I2.214 J-1.449 E.05373 G1 X-75.52 Y43.082 E.02386 G2 X-76.176 Y43.474 I.206 J1.087 E.02586 G1 X-76.831 Y44.165 E.03159 G3 X-78.469 Y44.417 I-1.056 J-1.418 E.05721 G3 X-79.451 Y43.451 I3.691 J-4.74 E.0458 G2 X-81.089 Y43.199 I-1.056 J1.418 E.05721 G2 X-82.072 Y44.165 I3.691 J4.74 E.0458 G3 X-83.71 Y44.417 I-1.056 J-1.418 E.05721 G3 X-84.693 Y43.451 I3.691 J-4.74 E.0458 G2 X-86.331 Y43.199 I-1.056 J1.418 E.05721 G2 X-87.313 Y44.165 I3.691 J4.74 E.0458 G3 X-88.951 Y44.417 I-1.056 J-1.418 E.05721 G3 X-89.934 Y43.451 I3.691 J-4.74 E.0458 G1 X-90.687 Y43.117 E.02732 G1 X-90.687 Y40.552 E.0851 G1 X-89.934 Y40.461 E.02515 G3 X-89.279 Y40.853 I-.206 J1.087 E.02586 G1 X-88.624 Y41.544 E.03159 G2 X-86.986 Y41.796 I1.056 J-1.418 E.05721 G2 X-86.003 Y40.831 I-3.691 J-4.74 E.0458 G3 X-84.365 Y40.579 I1.056 J1.418 E.05721 G3 X-83.382 Y41.544 I-3.691 J4.74 E.0458 G2 X-81.745 Y41.796 I1.056 J-1.418 E.05721 G2 X-80.762 Y40.831 I-3.691 J-4.74 E.0458 G3 X-79.124 Y40.579 I1.056 J1.418 E.05721 G3 X-78.141 Y41.544 I-3.691 J4.74 E.0458 G2 X-76.503 Y41.796 I1.056 J-1.418 E.05721 G2 X-75.52 Y40.831 I-3.691 J-4.74 E.0458 G3 X-73.883 Y40.579 I1.056 J1.418 E.05721 G3 X-73.305 Y41.117 I-2.044 J2.773 E.02626 G2 X-74.511 Y42.162 I.885 J2.241 E.05396 G1 X-73.713 Y10.901 F30000 G1 F16200 G1 X-73.713 Y9.273 E.05401 G2 X-74.21 Y9.013 I-.602 J.546 E.01899 G2 X-75.52 Y9.383 I-.219 J1.732 E.04639 G3 X-76.503 Y10.348 I-4.674 J-3.775 E.0458 G1 X-76.831 Y10.466 E.01155 G3 X-78.141 Y10.096 I-.219 J-1.732 E.04639 G2 X-79.124 Y9.131 I-4.674 J3.775 E.0458 G1 X-79.451 Y9.013 E.01155 G2 X-80.762 Y9.383 I-.219 J1.732 E.04639 G3 X-81.745 Y10.348 I-4.674 J-3.775 E.0458 G1 X-82.072 Y10.466 E.01155 G3 X-83.382 Y10.096 I-.219 J-1.732 E.04639 G2 X-84.365 Y9.131 I-4.674 J3.775 E.0458 G1 X-84.693 Y9.013 E.01155 G2 X-86.003 Y9.383 I-.219 J1.732 E.04639 G3 X-86.986 Y10.348 I-4.674 J-3.775 E.0458 G1 X-87.313 Y10.466 E.01155 G3 X-88.624 Y10.096 I-.219 J-1.732 E.04639 G2 X-89.607 Y9.131 I-4.674 J3.775 E.0458 G1 X-89.934 Y9.013 E.01155 G1 X-90.687 Y9.104 E.02515 G1 X-90.687 Y11.669 E.0851 G1 X-89.934 Y12.003 E.02732 G2 X-88.951 Y12.969 I4.674 J-3.775 E.0458 G1 X-88.624 Y13.087 E.01155 G2 X-87.313 Y12.717 I.219 J-1.732 E.04639 G3 X-86.331 Y11.751 I4.674 J3.775 E.0458 G1 X-86.003 Y11.634 E.01155 G3 X-84.693 Y12.003 I.219 J1.732 E.04639 G2 X-83.71 Y12.969 I4.674 J-3.775 E.0458 G1 X-83.382 Y13.087 E.01155 G2 X-82.072 Y12.717 I.219 J-1.732 E.04639 G3 X-81.089 Y11.751 I4.674 J3.775 E.0458 G1 X-80.762 Y11.634 E.01155 G3 X-79.451 Y12.003 I.219 J1.732 E.04639 G2 X-78.469 Y12.969 I4.674 J-3.775 E.0458 G1 X-78.141 Y13.087 E.01155 G2 X-76.831 Y12.717 I.219 J-1.732 E.04639 G3 X-75.848 Y11.751 I4.674 J3.775 E.0458 G1 X-75.52 Y11.634 E.01155 G3 X-73.713 Y12.528 I.064 J2.145 E.06963 G1 X-73.713 Y14.514 E.06589 G2 X-74.21 Y14.254 I-.602 J.546 E.01899 G2 X-75.52 Y14.624 I-.219 J1.732 E.04639 G3 X-76.503 Y15.59 I-4.674 J-3.775 E.0458 G1 X-76.831 Y15.707 E.01155 G3 X-78.141 Y15.338 I-.219 J-1.732 E.04639 G2 X-79.124 Y14.372 I-4.674 J3.775 E.0458 G1 X-79.451 Y14.254 E.01155 G2 X-80.762 Y14.624 I-.219 J1.732 E.04639 G3 X-81.745 Y15.59 I-4.674 J-3.775 E.0458 G1 X-82.072 Y15.707 E.01155 G3 X-83.382 Y15.338 I-.219 J-1.732 E.04639 G2 X-84.365 Y14.372 I-4.674 J3.775 E.0458 G1 X-84.693 Y14.254 E.01155 G2 X-86.003 Y14.624 I-.219 J1.732 E.04639 G3 X-86.986 Y15.59 I-4.674 J-3.775 E.0458 G1 X-87.313 Y15.707 E.01155 G3 X-88.624 Y15.338 I-.219 J-1.732 E.04639 G2 X-89.607 Y14.372 I-4.674 J3.775 E.0458 G1 X-89.934 Y14.254 E.01155 G1 X-90.687 Y14.345 E.02515 G1 X-90.687 Y16.911 E.0851 G1 X-89.934 Y17.245 E.02732 G2 X-88.951 Y18.21 I4.674 J-3.775 E.0458 G1 X-88.624 Y18.328 E.01155 G2 X-87.313 Y17.958 I.219 J-1.732 E.04639 G3 X-86.331 Y16.993 I4.674 J3.775 E.0458 G1 X-86.003 Y16.875 E.01155 G3 X-84.693 Y17.245 I.219 J1.732 E.04639 G2 X-83.71 Y18.21 I4.674 J-3.775 E.0458 G1 X-83.382 Y18.328 E.01155 G2 X-82.072 Y17.958 I.219 J-1.732 E.04639 G3 X-81.089 Y16.993 I4.674 J3.775 E.0458 G1 X-80.762 Y16.875 E.01155 G3 X-79.451 Y17.245 I.219 J1.732 E.04639 G2 X-78.469 Y18.21 I4.674 J-3.775 E.0458 G1 X-78.141 Y18.328 E.01155 G2 X-76.831 Y17.958 I.219 J-1.732 E.04639 G3 X-75.848 Y16.993 I4.674 J3.775 E.0458 G1 X-75.52 Y16.875 E.01155 G3 X-73.713 Y17.769 I.064 J2.145 E.06963 G1 X-73.713 Y19.755 E.06589 G2 X-74.21 Y19.496 I-.602 J.546 E.01899 G2 X-75.52 Y19.865 I-.219 J1.732 E.04639 G3 X-76.503 Y20.831 I-4.674 J-3.775 E.0458 G1 X-76.831 Y20.949 E.01155 G3 X-78.141 Y20.579 I-.219 J-1.732 E.04639 G2 X-79.124 Y19.613 I-4.674 J3.775 E.0458 G1 X-79.451 Y19.496 E.01155 G2 X-80.762 Y19.865 I-.219 J1.732 E.04639 G3 X-81.745 Y20.831 I-4.674 J-3.775 E.0458 G1 X-82.072 Y20.949 E.01155 G3 X-83.382 Y20.579 I-.219 J-1.732 E.04639 G2 X-84.365 Y19.613 I-4.674 J3.775 E.0458 G1 X-84.693 Y19.496 E.01155 G2 X-85.746 Y19.737 I-.242 J1.365 E.03683 G1 X-89.459 Y19.737 E.12316 G2 X-89.934 Y19.496 I-.565 J.526 E.01804 G1 X-90.687 Y19.586 E.02515 G1 X-90.687 Y22.152 E.0851 G1 X-89.934 Y22.486 E.02732 G1 X-89.713 Y22.719 E.01065 G1 X-89.713 Y24.816 E.06957 G1 X-89.934 Y24.737 E.00779 G1 X-90.687 Y24.828 E.02515 G1 X-90.687 Y27.393 E.0851 G1 X-89.934 Y27.727 E.02732 G2 X-88.951 Y28.693 I4.674 J-3.775 E.0458 G1 X-88.624 Y28.811 E.01155 G2 X-87.313 Y28.441 I.219 J-1.732 E.04639 G3 X-86.331 Y27.475 I4.674 J3.775 E.0458 G1 X-86.003 Y27.358 E.01155 G3 X-84.693 Y27.727 I.219 J1.732 E.04639 G2 X-83.71 Y28.693 I4.674 J-3.775 E.0458 G1 X-83.382 Y28.811 E.01155 G2 X-82.072 Y28.441 I.219 J-1.732 E.04639 G3 X-81.089 Y27.475 I4.674 J3.775 E.0458 G1 X-80.762 Y27.358 E.01155 G3 X-79.451 Y27.727 I.219 J1.732 E.04639 G2 X-78.469 Y28.693 I4.674 J-3.775 E.0458 G1 X-78.141 Y28.811 E.01155 G2 X-76.831 Y28.441 I.219 J-1.732 E.04639 G3 X-75.848 Y27.475 I4.674 J3.775 E.0458 G1 X-75.52 Y27.358 E.01155 G3 X-73.713 Y28.252 I.064 J2.145 E.06963 G1 X-73.713 Y30.238 E.06589 G2 X-74.21 Y29.978 I-.602 J.546 E.01899 G2 X-75.52 Y30.348 I-.219 J1.732 E.04639 G3 X-76.503 Y31.313 I-4.674 J-3.775 E.0458 G1 X-76.831 Y31.431 E.01155 G3 X-78.141 Y31.062 I-.219 J-1.732 E.04639 G2 X-79.124 Y30.096 I-4.674 J3.775 E.0458 G1 X-79.451 Y29.978 E.01155 G2 X-80.762 Y30.348 I-.219 J1.732 E.04639 G3 X-81.745 Y31.313 I-4.674 J-3.775 E.0458 G1 X-82.072 Y31.431 E.01155 G3 X-83.382 Y31.062 I-.219 J-1.732 E.04639 G2 X-84.365 Y30.096 I-4.674 J3.775 E.0458 G1 X-84.693 Y29.978 E.01155 G2 X-86.003 Y30.348 I-.219 J1.732 E.04639 G3 X-86.986 Y31.313 I-4.674 J-3.775 E.0458 G1 X-87.313 Y31.431 E.01155 G3 X-88.624 Y31.062 I-.219 J-1.732 E.04639 G2 X-89.607 Y30.096 I-4.674 J3.775 E.0458 G1 X-89.934 Y29.978 E.01155 G1 X-90.687 Y30.069 E.02515 G1 X-90.687 Y32.635 E.0851 G1 X-89.934 Y32.969 E.02732 G2 X-88.951 Y33.934 I4.674 J-3.775 E.0458 G1 X-88.624 Y34.052 E.01155 G2 X-87.313 Y33.682 I.219 J-1.732 E.04639 G3 X-86.331 Y32.717 I4.674 J3.775 E.0458 G1 X-86.003 Y32.599 E.01155 G3 X-84.693 Y32.969 I.219 J1.732 E.04639 G2 X-83.71 Y33.934 I4.674 J-3.775 E.0458 G1 X-83.382 Y34.052 E.01155 G2 X-82.072 Y33.682 I.219 J-1.732 E.04639 G3 X-81.089 Y32.717 I4.674 J3.775 E.0458 G1 X-80.762 Y32.599 E.01155 G3 X-79.451 Y32.969 I.219 J1.732 E.04639 G2 X-78.469 Y33.934 I4.674 J-3.775 E.0458 G1 X-78.141 Y34.052 E.01155 G2 X-76.831 Y33.682 I.219 J-1.732 E.04639 G3 X-75.848 Y32.717 I4.674 J3.775 E.0458 G1 X-75.52 Y32.599 E.01155 G3 X-74.21 Y32.969 I.219 J1.732 E.04639 G2 X-73.227 Y33.934 I4.674 J-3.775 E.0458 G1 X-72.9 Y34.052 E.01155 G2 X-71.59 Y33.682 I.219 J-1.732 E.04639 G3 X-70.607 Y32.717 I4.674 J3.775 E.0458 G1 X-70.279 Y32.599 E.01155 G3 X-68.969 Y32.969 I.219 J1.732 E.04639 G2 X-67.986 Y33.934 I4.674 J-3.775 E.0458 G1 X-67.659 Y34.052 E.01155 G2 X-66.348 Y33.682 I.219 J-1.732 E.04639 G3 X-65.365 Y32.717 I4.674 J3.775 E.0458 G1 X-65.038 Y32.599 E.01155 G3 X-63.728 Y32.969 I.219 J1.732 E.04639 G2 X-62.745 Y33.934 I4.674 J-3.775 E.0458 G1 X-62.417 Y34.052 E.01155 G2 X-61.107 Y33.682 I.219 J-1.732 E.04639 G3 X-60.124 Y32.717 I4.674 J3.775 E.0458 G1 X-59.797 Y32.599 E.01155 G3 X-58.486 Y32.969 I.219 J1.732 E.04639 G2 X-57.504 Y33.934 I4.674 J-3.775 E.0458 G1 X-57.176 Y34.052 E.01155 G2 X-55.866 Y33.682 I.219 J-1.732 E.04639 G3 X-54.883 Y32.717 I4.674 J3.775 E.0458 G1 X-54.555 Y32.599 E.01155 G3 X-53.245 Y32.969 I.219 J1.732 E.04639 G2 X-52.262 Y33.934 I4.674 J-3.775 E.0458 G1 X-51.935 Y34.052 E.01155 G2 X-50.624 Y33.682 I.219 J-1.732 E.04639 G3 X-49.642 Y32.717 I4.674 J3.775 E.0458 G1 X-49.314 Y32.599 E.01155 G3 X-48.004 Y32.969 I.219 J1.732 E.04639 G2 X-47.021 Y33.934 I4.674 J-3.775 E.0458 G1 X-46.693 Y34.052 E.01155 G2 X-45.383 Y33.682 I.219 J-1.732 E.04639 G3 X-44.4 Y32.717 I4.674 J3.775 E.0458 G1 X-44.073 Y32.599 E.01155 G3 X-42.762 Y32.969 I.219 J1.732 E.04639 G2 X-41.78 Y33.934 I4.674 J-3.775 E.0458 G1 X-41.452 Y34.052 E.01155 G2 X-40.142 Y33.682 I.219 J-1.732 E.04639 G3 X-39.159 Y32.717 I4.674 J3.775 E.0458 G1 X-38.831 Y32.599 E.01155 G3 X-37.521 Y32.969 I.219 J1.732 E.04639 G2 X-36.538 Y33.934 I4.674 J-3.775 E.0458 G1 X-36.211 Y34.052 E.01155 G2 X-34.9 Y33.682 I.219 J-1.732 E.04639 G3 X-33.918 Y32.717 I4.674 J3.775 E.0458 G1 X-33.59 Y32.599 E.01155 G3 X-32.28 Y32.969 I.219 J1.732 E.04639 G2 X-31.297 Y33.934 I4.674 J-3.775 E.0458 G1 X-30.969 Y34.052 E.01155 G2 X-29.659 Y33.682 I.219 J-1.732 E.04639 G3 X-28.676 Y32.717 I4.674 J3.775 E.0458 G1 X-28.349 Y32.599 E.01155 G3 X-27.038 Y32.969 I.219 J1.732 E.04639 G2 X-26.056 Y33.934 I4.674 J-3.775 E.0458 G1 X-25.728 Y34.052 E.01155 G2 X-24.418 Y33.682 I.219 J-1.732 E.04639 G3 X-23.435 Y32.717 I4.674 J3.775 E.0458 G1 X-23.107 Y32.599 E.01155 G3 X-21.797 Y32.969 I.219 J1.732 E.04639 G2 X-20.814 Y33.934 I4.674 J-3.775 E.0458 G1 X-20.487 Y34.052 E.01155 G2 X-19.176 Y33.682 I.219 J-1.732 E.04639 G3 X-18.194 Y32.717 I4.674 J3.775 E.0458 G1 X-17.866 Y32.599 E.01155 G3 X-16.556 Y32.969 I.219 J1.732 E.04639 G2 X-15.573 Y33.934 I4.674 J-3.775 E.0458 G1 X-15.245 Y34.052 E.01155 G1 X-14.59 Y34.01 E.02178 G1 X-14.213 Y33.821 E.01399 G1 X-14.213 Y31.413 E.07987 G1 X-14.59 Y31.389 E.01254 G1 X-15.245 Y31.062 E.0243 G2 X-16.228 Y30.096 I-4.674 J3.775 E.0458 G1 X-16.556 Y29.978 E.01155 G2 X-17.866 Y30.348 I-.219 J1.732 E.04639 G3 X-18.849 Y31.313 I-4.674 J-3.775 E.0458 G1 X-19.176 Y31.431 E.01155 G3 X-20.487 Y31.062 I-.219 J-1.732 E.04639 G2 X-21.47 Y30.096 I-4.674 J3.775 E.0458 G1 X-21.797 Y29.978 E.01155 G2 X-23.107 Y30.348 I-.219 J1.732 E.04639 G3 X-24.09 Y31.313 I-4.674 J-3.775 E.0458 G1 X-24.418 Y31.431 E.01155 G3 X-25.728 Y31.062 I-.219 J-1.732 E.04639 G2 X-26.711 Y30.096 I-4.674 J3.775 E.0458 G1 X-27.038 Y29.978 E.01155 G2 X-28.349 Y30.348 I-.219 J1.732 E.04639 G3 X-29.331 Y31.313 I-4.674 J-3.775 E.0458 G1 X-29.659 Y31.431 E.01155 G3 X-31.187 Y30.832 I-.091 J-2.016 E.05606 G1 X-31.187 Y28.732 E.06965 G1 X-30.969 Y28.811 E.00767 G2 X-29.659 Y28.441 I.219 J-1.732 E.04639 G3 X-28.676 Y27.475 I4.674 J3.775 E.0458 G1 X-28.349 Y27.358 E.01155 G3 X-27.038 Y27.727 I.219 J1.732 E.04639 G2 X-26.056 Y28.693 I4.674 J-3.775 E.0458 G1 X-25.728 Y28.811 E.01155 G2 X-24.418 Y28.441 I.219 J-1.732 E.04639 G3 X-23.435 Y27.475 I4.674 J3.775 E.0458 G1 X-23.107 Y27.358 E.01155 G3 X-21.797 Y27.727 I.219 J1.732 E.04639 G2 X-20.814 Y28.693 I4.674 J-3.775 E.0458 G1 X-20.487 Y28.811 E.01155 G2 X-19.176 Y28.441 I.219 J-1.732 E.04639 G3 X-18.194 Y27.475 I4.674 J3.775 E.0458 G1 X-17.866 Y27.358 E.01155 G3 X-16.556 Y27.727 I.219 J1.732 E.04639 G2 X-15.573 Y28.693 I4.674 J-3.775 E.0458 G1 X-15.245 Y28.811 E.01155 G1 X-14.59 Y28.769 E.02178 G1 X-14.213 Y28.58 E.01399 G1 X-14.213 Y26.172 E.07987 G1 X-14.59 Y26.148 E.01254 G1 X-15.187 Y25.85 E.02213 G1 X-15.187 Y23.566 E.07577 G2 X-14.213 Y23.339 I.219 J-1.264 E.03407 G1 X-14.213 Y20.931 E.07987 G1 X-14.59 Y20.907 E.01254 G1 X-15.187 Y20.608 E.02213 G1 X-15.187 Y19.737 E.02891 G1 X-16.081 Y19.737 E.02965 G2 X-16.556 Y19.496 I-.565 J.526 E.01804 G2 X-17.609 Y19.737 I-.242 J1.365 E.03683 G1 X-19.238 Y19.737 E.05401 G1 X-18.891 Y26.263 F30000 G1 F16200 G1 X-20.213 Y26.263 E.04387 G1 X-20.213 Y25.957 E.01015 G1 X-20.487 Y25.82 E.01015 G2 X-21.47 Y24.855 I-4.674 J3.775 E.0458 G2 X-23.107 Y25.107 I-.582 J1.67 E.05721 G3 X-24.09 Y26.072 I-4.674 J-3.775 E.0458 G3 X-25.728 Y25.82 I-.582 J-1.67 E.05721 G2 X-26.711 Y24.855 I-4.674 J3.775 E.0458 G2 X-28.349 Y25.107 I-.582 J1.67 E.05721 G3 X-29.331 Y26.072 I-4.674 J-3.775 E.0458 G3 X-30.969 Y25.82 I-.582 J-1.67 E.05721 G1 X-31.187 Y25.591 E.01049 G1 X-31.187 Y23.491 E.06965 G2 X-29.659 Y23.2 I.459 J-1.744 E.05334 G3 X-28.676 Y22.234 I4.674 J3.775 E.0458 G3 X-27.038 Y22.486 I.582 J1.67 E.05721 G2 X-26.056 Y23.452 I4.674 J-3.775 E.0458 G2 X-24.418 Y23.2 I.582 J-1.67 E.05721 G3 X-23.435 Y22.234 I4.674 J3.775 E.0458 G3 X-21.797 Y22.486 I.582 J1.67 E.05721 G1 X-21.142 Y23.177 E.03159 G2 X-20.213 Y23.552 I.806 J-.66 E.03466 G1 X-20.213 Y20.716 E.09407 G1 X-20.487 Y20.579 E.01015 G2 X-21.47 Y19.613 I-4.674 J3.775 E.0458 G2 X-23.107 Y19.865 I-.582 J1.67 E.05721 G3 X-24.09 Y20.831 I-4.674 J-3.775 E.0458 G3 X-25.728 Y20.579 I-.582 J-1.67 E.05721 G2 X-26.711 Y19.613 I-4.674 J3.775 E.0458 G2 X-28.349 Y19.865 I-.582 J1.67 E.05721 G3 X-29.331 Y20.831 I-4.674 J-3.775 E.0458 G3 X-30.969 Y20.579 I-.582 J-1.67 E.05721 G1 X-31.187 Y20.35 E.01049 G1 X-31.187 Y18.25 E.06965 G2 X-29.659 Y17.958 I.459 J-1.744 E.05334 G3 X-28.676 Y16.993 I4.674 J3.775 E.0458 G3 X-27.038 Y17.245 I.582 J1.67 E.05721 G2 X-26.056 Y18.21 I4.674 J-3.775 E.0458 G2 X-24.418 Y17.958 I.582 J-1.67 E.05721 G3 X-23.435 Y16.993 I4.674 J3.775 E.0458 G3 X-21.797 Y17.245 I.582 J1.67 E.05721 G2 X-20.814 Y18.21 I4.674 J-3.775 E.0458 G2 X-19.176 Y17.958 I.582 J-1.67 E.05721 G3 X-18.194 Y16.993 I4.674 J3.775 E.0458 G3 X-16.556 Y17.245 I.582 J1.67 E.05721 G1 X-15.901 Y17.936 E.03159 G2 X-15.245 Y18.328 I.861 J-.695 E.02586 G1 X-14.59 Y18.286 E.02178 G1 X-14.213 Y18.097 E.01399 G1 X-14.213 Y15.69 E.07987 G1 X-14.59 Y15.666 E.01254 G1 X-15.245 Y15.338 E.0243 G2 X-16.228 Y14.372 I-4.674 J3.775 E.0458 G2 X-17.866 Y14.624 I-.582 J1.67 E.05721 G3 X-18.849 Y15.59 I-4.674 J-3.775 E.0458 G3 X-20.487 Y15.338 I-.582 J-1.67 E.05721 G2 X-21.47 Y14.372 I-4.674 J3.775 E.0458 G2 X-23.107 Y14.624 I-.582 J1.67 E.05721 G3 X-24.09 Y15.59 I-4.674 J-3.775 E.0458 G3 X-25.728 Y15.338 I-.582 J-1.67 E.05721 G2 X-26.711 Y14.372 I-4.674 J3.775 E.0458 G2 X-28.349 Y14.624 I-.582 J1.67 E.05721 G3 X-29.331 Y15.59 I-4.674 J-3.775 E.0458 G3 X-30.969 Y15.338 I-.582 J-1.67 E.05721 G1 X-31.187 Y15.108 E.01049 G1 X-31.187 Y13.008 E.06965 G2 X-29.659 Y12.717 I.459 J-1.744 E.05334 G3 X-28.676 Y11.751 I4.674 J3.775 E.0458 G3 X-27.038 Y12.003 I.582 J1.67 E.05721 G2 X-26.056 Y12.969 I4.674 J-3.775 E.0458 G2 X-24.418 Y12.717 I.582 J-1.67 E.05721 G3 X-23.435 Y11.751 I4.674 J3.775 E.0458 G3 X-21.797 Y12.003 I.582 J1.67 E.05721 G2 X-20.814 Y12.969 I4.674 J-3.775 E.0458 G2 X-19.176 Y12.717 I.582 J-1.67 E.05721 G3 X-18.194 Y11.751 I4.674 J3.775 E.0458 G3 X-16.556 Y12.003 I.582 J1.67 E.05721 G1 X-15.901 Y12.695 E.03159 G2 X-15.245 Y13.087 I.861 J-.695 E.02586 G1 X-14.59 Y13.045 E.02178 G1 X-14.213 Y12.856 E.01399 G1 X-14.213 Y10.448 E.07987 G1 X-14.59 Y10.424 E.01254 G1 X-15.245 Y10.096 E.0243 G2 X-16.228 Y9.131 I-4.674 J3.775 E.0458 G2 X-17.866 Y9.383 I-.582 J1.67 E.05721 G3 X-18.849 Y10.348 I-4.674 J-3.775 E.0458 G3 X-20.487 Y10.096 I-.582 J-1.67 E.05721 G2 X-21.47 Y9.131 I-4.674 J3.775 E.0458 G2 X-23.107 Y9.383 I-.582 J1.67 E.05721 G3 X-24.09 Y10.348 I-4.674 J-3.775 E.0458 G3 X-25.728 Y10.096 I-.582 J-1.67 E.05721 G2 X-26.711 Y9.131 I-4.674 J3.775 E.0458 G2 X-28.349 Y9.383 I-.582 J1.67 E.05721 G3 X-29.331 Y10.348 I-4.674 J-3.775 E.0458 G3 X-30.969 Y10.096 I-.582 J-1.67 E.05721 G1 X-31.187 Y9.867 E.01049 G1 X-31.187 Y11.495 E.05401 G1 X-30.121 Y42.927 F30000 G1 F16200 G3 X-30.399 Y44.498 I-2.678 J.337 E.05374 G1 X-29.659 Y44.165 E.02691 G3 X-28.676 Y43.199 I4.674 J3.775 E.0458 G3 X-27.038 Y43.451 I.582 J1.67 E.05721 G2 X-26.056 Y44.417 I4.674 J-3.775 E.0458 G2 X-24.418 Y44.165 I.582 J-1.67 E.05721 G3 X-23.435 Y43.199 I4.674 J3.775 E.0458 G3 X-21.797 Y43.451 I.582 J1.67 E.05721 G2 X-20.814 Y44.417 I4.674 J-3.775 E.0458 G2 X-19.176 Y44.165 I.582 J-1.67 E.05721 G3 X-18.194 Y43.199 I4.674 J3.775 E.0458 G3 X-16.556 Y43.451 I.582 J1.67 E.05721 G1 X-15.901 Y44.142 E.03159 G2 X-15.245 Y44.534 I.861 J-.695 E.02586 G1 X-14.59 Y44.493 E.02178 G1 X-14.213 Y44.304 E.01399 G1 X-14.213 Y41.896 E.07987 G1 X-14.59 Y41.872 E.01254 G1 X-15.245 Y41.544 E.0243 G2 X-16.228 Y40.579 I-4.674 J3.775 E.0458 G2 X-17.866 Y40.831 I-.582 J1.67 E.05721 G3 X-18.849 Y41.796 I-4.674 J-3.775 E.0458 G3 X-20.487 Y41.544 I-.582 J-1.67 E.05721 G2 X-21.47 Y40.579 I-4.674 J3.775 E.0458 G2 X-23.107 Y40.831 I-.582 J1.67 E.05721 G3 X-24.09 Y41.796 I-4.674 J-3.775 E.0458 G3 X-25.728 Y41.544 I-.582 J-1.67 E.05721 G2 X-26.711 Y40.579 I-4.674 J3.775 E.0458 G2 X-28.349 Y40.831 I-.582 J1.67 E.05721 G1 X-29.004 Y41.522 E.03159 G3 X-30.795 Y41.631 I-.957 J-.955 E.06508 G2 X-31.952 Y40.579 I-33.788 J35.976 E.0519 G2 X-33.59 Y40.831 I-.582 J1.67 E.05721 G3 X-34.573 Y41.796 I-4.674 J-3.775 E.0458 G3 X-36.211 Y41.544 I-.582 J-1.67 E.05721 G2 X-37.193 Y40.579 I-4.674 J3.775 E.0458 G2 X-38.831 Y40.831 I-.582 J1.67 E.05721 G3 X-39.814 Y41.796 I-4.674 J-3.775 E.0458 G3 X-41.452 Y41.544 I-.582 J-1.67 E.05721 G2 X-42.435 Y40.579 I-4.674 J3.775 E.0458 G2 X-44.073 Y40.831 I-.582 J1.67 E.05721 G3 X-45.055 Y41.796 I-4.674 J-3.775 E.0458 G3 X-46.693 Y41.544 I-.582 J-1.67 E.05721 G2 X-47.676 Y40.579 I-4.674 J3.775 E.0458 G2 X-49.314 Y40.831 I-.582 J1.67 E.05721 G3 X-50.297 Y41.796 I-4.674 J-3.775 E.0458 G3 X-51.935 Y41.544 I-.582 J-1.67 E.05721 G2 X-52.917 Y40.579 I-4.674 J3.775 E.0458 G2 X-54.555 Y40.831 I-.582 J1.67 E.05721 G3 X-55.538 Y41.796 I-4.674 J-3.775 E.0458 G3 X-57.176 Y41.544 I-.582 J-1.67 E.05721 G2 X-58.159 Y40.579 I-4.674 J3.775 E.0458 G2 X-59.797 Y40.831 I-.582 J1.67 E.05721 G3 X-60.779 Y41.796 I-4.674 J-3.775 E.0458 G3 X-62.417 Y41.544 I-.582 J-1.67 E.05721 G2 X-63.4 Y40.579 I-4.674 J3.775 E.0458 G2 X-65.038 Y40.831 I-.582 J1.67 E.05721 G3 X-66.021 Y41.796 I-4.674 J-3.775 E.0458 G3 X-67.659 Y41.544 I-.582 J-1.67 E.05721 M73 P15 R92 G2 X-68.641 Y40.579 I-4.674 J3.775 E.0458 G2 X-70.279 Y40.831 I-.582 J1.67 E.05721 G1 X-70.928 Y41.515 E.03128 G3 X-70.099 Y43.093 I-1.531 J1.811 E.06062 G1 X-69.624 Y43.123 E.01579 G1 X-68.969 Y43.451 E.0243 G2 X-67.986 Y44.417 I4.674 J-3.775 E.0458 G2 X-66.348 Y44.165 I.582 J-1.67 E.05721 G3 X-65.365 Y43.199 I4.674 J3.775 E.0458 G3 X-63.728 Y43.451 I.582 J1.67 E.05721 G2 X-62.745 Y44.417 I4.674 J-3.775 E.0458 G2 X-61.107 Y44.165 I.582 J-1.67 E.05721 G3 X-60.124 Y43.199 I4.674 J3.775 E.0458 G3 X-58.486 Y43.451 I.582 J1.67 E.05721 G2 X-57.504 Y44.417 I4.674 J-3.775 E.0458 G2 X-55.866 Y44.165 I.582 J-1.67 E.05721 G3 X-54.883 Y43.199 I4.674 J3.775 E.0458 G3 X-53.245 Y43.451 I.582 J1.67 E.05721 G2 X-52.262 Y44.417 I4.674 J-3.775 E.0458 G2 X-50.624 Y44.165 I.582 J-1.67 E.05721 G3 X-49.642 Y43.199 I4.674 J3.775 E.0458 G3 X-48.004 Y43.451 I.582 J1.67 E.05721 G2 X-47.021 Y44.417 I4.674 J-3.775 E.0458 G2 X-45.383 Y44.165 I.582 J-1.67 E.05721 G3 X-44.4 Y43.199 I4.674 J3.775 E.0458 G3 X-42.762 Y43.451 I.582 J1.67 E.05721 G2 X-41.78 Y44.417 I4.674 J-3.775 E.0458 G2 X-40.142 Y44.165 I.582 J-1.67 E.05721 G3 X-39.159 Y43.199 I4.674 J3.775 E.0458 G3 X-37.521 Y43.451 I.582 J1.67 E.05721 G2 X-36.538 Y44.417 I4.674 J-3.775 E.0458 G2 X-34.9 Y44.165 I.582 J-1.67 E.05721 G1 X-34.721 Y43.975 E.00867 G2 X-33.785 Y45.267 I2.527 J-.845 E.05373 G1 X-20.025 Y46.414 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.484254 G1 F15000 G1 X-20.533 Y46.941 E.02635 G2 X-21.246 Y48.639 I2.548 J2.068 E.0671 G1 X-21.234 Y49.336 E.02509 G1 X-21.212 Y49.528 E.00694 G1 X-20.768 Y49.528 E.01597 G3 X-20.799 Y48.596 I4.051 J-.6 E.0336 G1 X-20.619 Y47.926 E.02496 G1 X-20.334 Y47.413 E.02108 G3 X-19.678 Y46.7 I3.14 J2.23 E.03493 G1 X-19.077 Y46.353 E.02496 G1 X-18.354 Y46.152 E.02701 G1 X-17.603 Y46.144 E.02701 G1 X-16.876 Y46.334 E.02701 G1 X-16.222 Y46.7 E.02699 G1 X-15.685 Y47.226 E.02701 G1 X-15.398 Y47.691 E.01966 ;WIDTH:0.480948 G1 X-15.265 Y48.148 E.01697 ;WIDTH:0.422994 G1 X-15.132 Y48.604 E.01473 G3 X-15.167 Y49.556 I-3.859 J.335 E.02957 G1 X-14.394 Y49.556 E.02394 G1 X-14.394 Y47.367 E.06779 G1 X-14.671 Y47.467 E.00912 G1 X-14.937 Y47.47 E.00823 ;WIDTH:0.486668 G1 X-15.037 Y47.409 E.00425 G1 X-15.312 Y46.984 E.01828 G1 X-15.874 Y46.414 E.02896 G2 X-16.744 Y45.919 I-2.02 J2.536 E.03634 G1 X-17.445 Y45.722 E.02633 G2 X-18.454 Y45.723 I-.503 J3.527 E.03657 G1 X-19.152 Y45.909 E.02614 G2 X-19.992 Y46.391 I1.262 J3.172 E.03514 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-19.614 Y46.135 G1 X-19.152 Y45.909 G1 X-18.454 Y45.723 G1 X-18.148 Y45.7 ;WIPE_END G1 X-14.76 Y49.19 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397572 G1 F15000 G1 X-14.76 Y48.653 E.01552 ;WIDTH:0.419201 G1 X-14.78 Y48.48 E.00533 ;WIDTH:0.462458 G1 X-14.801 Y48.308 E.00594 ;WIDTH:0.505715 G1 X-14.821 Y48.135 E.00655 ;WIDTH:0.527343 G1 X-14.842 Y47.963 E.00686 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.821 Y48.135 ;WIPE_END G1 X-13.529 Y40.613 Z1.4 F30000 G1 X.795 Y-42.79 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X.795 Y-42.355 E.01443 G1 X-6.495 Y-42.355 E.24182 G1 X-6.495 Y-49.645 E.24182 G1 X.795 Y-49.645 E.24182 G1 X.795 Y-42.83 E.22607 G1 X.36 Y-42.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-6.06 Y-42.79 E.19727 G1 X-6.06 Y-49.21 E.19727 G1 X.36 Y-49.21 E.19727 G1 X.36 Y-42.83 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.64 Y-42.818 ;WIPE_END G1 X-6.902 Y-42.052 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-7.298 Y-42.052 E.01313 G1 X-7.298 Y-49.948 E.26192 G1 X-6.902 Y-49.948 E.01313 G1 X-6.902 Y-42.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-7.298 Y-42.052 G1 X-7.298 Y-43.654 ;WIPE_END G1 X.334 Y-43.768 Z1.4 F30000 G1 X1.798 Y-43.79 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X1.798 Y-49.052 E.17455 G1 X5.902 Y-49.052 E.13614 G1 X5.902 Y-42.948 E.20249 G1 X1.798 Y-42.948 E.13614 G1 X1.798 Y-43.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.205 Y-43.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.205 Y-48.645 E.16105 G1 X5.495 Y-48.645 E.10914 G1 X5.495 Y-43.355 E.17548 G1 X2.205 Y-43.355 E.10914 G1 X2.205 Y-43.75 E.0131 G1 X2.64 Y-43.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.64 Y-48.21 E.13581 G1 X5.06 Y-48.21 E.07436 G1 X5.06 Y-43.79 E.13581 G1 X2.68 Y-43.79 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.662 Y-45.79 ;WIPE_END G1 X1.202 Y-42.79 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X1.202 Y-49.948 E.23744 G1 X7.298 Y-49.948 E.20221 G1 X7.298 Y-42.052 E.26192 G1 X1.202 Y-42.052 E.20221 G1 X1.202 Y-42.75 E.02315 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X1.202 Y-44.75 ;WIPE_END G1 X7.705 Y-41.645 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-7.705 Y-41.645 E.51118 G1 X-7.705 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.51118 G1 X7.705 Y-41.685 E.2876 G1 X8.14 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.106 Y-42.5 Z1.4 F30000 G1 Z1 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X1.406 Y-42.5 E.18719 G1 X1.744 Y-42.256 F30000 ;WIDTH:0.373259 G1 F12000 G1 X1.683 Y-42.378 E.00368 ;WIDTH:0.349663 G1 X1.622 Y-42.5 E.00341 ;WIDTH:0.302472 G1 X1.561 Y-42.622 E.00289 ;WIDTH:0.25528 G1 X1.5 Y-42.744 E.00236 ;WIDTH:0.23217 G1 X1.5 Y-49.256 E.10041 G1 X1.561 Y-49.378 E.00211 ;WIDTH:0.302473 G1 X1.622 Y-49.5 E.00289 ;WIDTH:0.349664 G1 X1.683 Y-49.622 E.00341 ;WIDTH:0.396855 G1 X1.744 Y-49.744 E.00394 G1 X1.406 Y-49.5 F30000 ;WIDTH:0.531684 G1 F12000 G1 X6.106 Y-49.5 E.18719 G1 X6.353 Y-48.798 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537302 G1 F15000 G1 X6.353 Y-43.202 E.22541 G1 X6.455 Y-43.169 E.00431 ;WIDTH:0.520342 G1 X6.472 Y-43.103 E.00267 ;WIDTH:0.48642 G1 X6.488 Y-43.036 E.00248 ;WIDTH:0.436317 G1 X6.505 Y-42.969 E.0022 G1 X6.505 Y-42.452 E.01659 G1 X6.898 Y-42.452 E.01259 G1 X6.898 Y-42.969 E.01659 ;WIDTH:0.452498 G1 X6.881 Y-43.103 E.00448 ;WIDTH:0.48642 G1 X6.864 Y-43.236 E.00485 ;WIDTH:0.53688 G1 X6.847 Y-43.369 E.00541 G1 X6.847 Y-48.631 E.21179 ;WIDTH:0.520342 G1 X6.864 Y-48.764 E.00523 ;WIDTH:0.48642 G1 X6.881 Y-48.897 E.00485 ;WIDTH:0.436996 G1 X6.898 Y-49.031 E.00431 G1 X6.898 Y-49.548 E.01662 G1 X6.505 Y-49.548 E.01261 G1 X6.505 Y-49.031 E.01662 ;WIDTH:0.452498 G1 X6.488 Y-48.964 E.00229 ;WIDTH:0.48642 G1 X6.472 Y-48.897 E.00248 ;WIDTH:0.520124 G3 X6.391 Y-48.81 I-.068 J.018 E.00551 SET_VELOCITY_LIMIT ACCEL=10000 G1 X.999 Y-50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-6.699 Y-50 E.19 G1 X-6.699 Y-42 F30000 G1 F12000 G1 X.999 Y-42 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.001 Y-42 ;WIPE_END G1 X5.228 Y-37.59 Z1.4 F30000 G1 X77.698 Y13.71 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X77.698 Y8.448 E.17455 G1 X81.802 Y8.448 E.13614 G1 X81.802 Y14.552 E.20249 G1 X77.698 Y14.552 E.13614 G1 X77.698 Y13.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X78.105 Y13.71 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X78.105 Y8.855 E.16105 G1 X81.395 Y8.855 E.10914 G1 X81.395 Y14.145 E.17548 G1 X78.105 Y14.145 E.10914 G1 X78.105 Y13.75 E.0131 G1 X78.54 Y13.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X78.54 Y9.29 E.13581 G1 X80.96 Y9.29 E.07436 G1 X80.96 Y13.71 E.13581 G1 X78.58 Y13.71 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X78.562 Y11.71 ;WIPE_END G1 X74.198 Y15.448 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X82.398 Y7.552 E.27519 G1 X82.398 Y15.448 E.26192 G1 X74.238 Y15.448 E.27068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.102 Y15.448 G1 X74.102 Y13.584 ;WIPE_END G1 X81.264 Y10.946 Z1.4 F30000 G1 X89.66 Y7.855 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X90.095 Y7.855 E.01443 G1 X90.095 Y15.145 E.24182 G1 X82.805 Y15.145 E.24182 G1 X82.805 Y7.855 E.24182 G1 X89.62 Y7.855 E.22607 G1 X89.66 Y8.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X89.66 Y14.71 E.19727 G1 X83.24 Y14.71 E.19727 G1 X83.24 Y8.29 E.19727 G1 X89.62 Y8.29 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.502 Y8.29 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X90.502 Y7.552 E.02448 G1 X90.898 Y7.552 E.01313 G1 X90.898 Y15.448 E.26192 G1 X90.502 Y15.448 E.01313 G1 X90.502 Y8.33 E.23611 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X90.502 Y7.552 G1 X90.898 Y7.552 G1 X90.898 Y8.378 ;WIPE_END G1 X83.961 Y11.562 Z1.4 F30000 G1 X74.605 Y15.855 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X91.305 Y7.145 E.58416 G1 X91.305 Y15.855 E.28893 G1 X74.645 Y15.855 E.55264 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z1.4 F30000 G1 Z1 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y13.868 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y15.237 E.04541 G1 X74.572 Y15.237 E.0086 G3 X75.809 Y14.296 I1.915 J1.233 E.05258 G1 X76.308 Y14.264 E.01659 G1 X76.308 Y11.925 E.07759 G2 X75.153 Y11.634 I-.922 J1.218 E.04057 G2 X74.313 Y12.221 I.591 J1.74 E.03446 G1 X74.313 Y10.229 E.06608 G2 X75.153 Y9.383 I-3.246 J-4.063 E.03964 G1 X75.809 Y9.055 E.0243 G1 X76.308 Y9.023 E.01659 G1 X76.308 Y7.763 E.04179 G1 X75.939 Y7.763 E.01222 G1 X77.494 Y8 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X82.194 Y8 E.18719 G1 X81.856 Y7.756 F30000 ;WIDTH:0.373252 G1 F12000 G1 X81.917 Y7.878 E.00368 ;WIDTH:0.349657 G1 X81.978 Y8 E.00341 ;WIDTH:0.302466 G1 X82.039 Y8.122 E.00289 ;WIDTH:0.255276 G1 X82.1 Y8.244 E.00236 ;WIDTH:0.232166 G1 X82.1 Y14.756 E.10041 G1 X82.039 Y14.878 E.00211 ;WIDTH:0.302467 G1 X81.978 Y15 E.00289 ;WIDTH:0.349657 G1 X81.917 Y15.122 E.00341 ;WIDTH:0.396847 G1 X81.856 Y15.244 E.00394 G1 X82.194 Y15 F30000 ;WIDTH:0.531684 G1 F12000 G1 X77.494 Y15 E.18719 G1 X77.249 Y14.299 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.534503 G1 F15000 G1 X77.249 Y8.702 E.2242 G1 X77.147 Y8.669 E.00428 ;WIDTH:0.517543 G1 X77.13 Y8.602 E.00265 ;WIDTH:0.483621 G1 X77.113 Y8.536 E.00246 ;WIDTH:0.433516 G1 X77.096 Y8.469 E.00218 G1 X77.096 Y7.951 E.01651 G1 X76.706 Y7.951 E.01241 G1 X76.706 Y8.469 E.01651 ;WIDTH:0.4497 G1 X76.723 Y8.602 E.00444 ;WIDTH:0.483621 G1 X76.74 Y8.735 E.00481 ;WIDTH:0.534083 G1 X76.757 Y8.868 E.00536 G1 X76.757 Y14.132 E.21071 ;WIDTH:0.517543 G1 X76.74 Y14.373 E.00933 ;WIDTH:0.483621 G1 X76.723 Y14.614 E.00867 ;WIDTH:0.435783 G2 X76.706 Y15.049 I3.084 J.338 E.01397 G1 X77.096 Y15.049 E.01248 G1 X77.096 Y14.531 E.01661 ;WIDTH:0.4497 G1 X77.113 Y14.464 E.00227 ;WIDTH:0.483621 G1 X77.13 Y14.398 E.00246 ;WIDTH:0.517348 G3 X77.211 Y14.311 I.068 J-.018 E.00547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X82.601 Y15.5 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X90.299 Y15.5 E.19 G1 X90.299 Y7.5 F30000 G1 F12000 G1 X82.601 Y7.5 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X84.601 Y7.5 ;WIPE_END G1 X79.338 Y13.027 Z1.4 F30000 G1 X55.548 Y38.01 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z1.4 F30000 G1 Z1 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X49.645 Y-5.756 Z1.4 F30000 G1 X3.102 Y40.648 Z1.4 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X35.998 Y-10.448 E1.09122 G1 X35.998 Y40.648 E1.69494 G1 X3.142 Y40.648 E1.08989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X3.624 Y40.214 Z1.4 F30000 G1 Z1 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.421604 G1 F15000 G1 X3.553 Y40.255 E.00253 G1 X3.628 Y40.29 E.00254 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.426 Y-9.083 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.568975 G1 F14548.025 G1 X35.426 Y-9.981 E.0385 G1 X34.528 Y-9.981 E.0385 G1 X35.397 Y-9.112 E.05273 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.502 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420498 G1 F15000 G1 X35.5 Y-8.423 E.08696 G1 X35.5 Y-7.889 E.01643 G1 X33.138 Y-10.252 E.10281 G1 X32.604 Y-10.252 E.01643 G1 X35.5 Y-7.355 E.12604 G1 X35.5 Y-6.821 E.01643 G1 X32.07 Y-10.252 E.14928 G1 X31.536 Y-10.252 E.01643 G1 X35.5 Y-6.287 E.17251 G1 X35.5 Y-5.753 E.01643 G1 X31.002 Y-10.252 E.19574 G1 X30.468 Y-10.252 E.01643 G1 X35.5 Y-5.219 E.21898 G1 X35.5 Y-4.685 E.01643 G1 X29.934 Y-10.252 E.24221 G1 X29.4 Y-10.252 E.01643 G1 X35.5 Y-4.151 E.26545 G1 X35.5 Y-3.617 E.01643 G1 X28.866 Y-10.252 E.28868 G1 X28.332 Y-10.252 E.01643 G1 X35.5 Y-3.083 E.31192 G1 X35.5 Y-2.549 E.01643 G1 X27.798 Y-10.252 E.33515 G1 X27.264 Y-10.252 E.01643 G1 X35.5 Y-2.015 E.35839 G1 X35.5 Y-1.481 E.01643 G1 X26.73 Y-10.252 E.38162 G1 X26.196 Y-10.252 E.01643 G1 X35.5 Y-.947 E.40486 G1 X35.5 Y-.414 E.01643 G1 X25.662 Y-10.252 E.42809 G1 X25.128 Y-10.252 E.01643 G1 X35.5 Y.12 E.45132 G1 X35.5 Y.654 E.01643 G1 X24.594 Y-10.252 E.47456 G1 X24.06 Y-10.252 E.01643 G1 X35.5 Y1.188 E.49779 G1 X35.5 Y1.722 E.01643 G1 X23.526 Y-10.252 E.52103 G1 X22.992 Y-10.252 E.01643 G1 X35.5 Y2.256 E.54426 G1 X35.5 Y2.79 E.01643 G1 X22.458 Y-10.252 E.5675 G1 X21.924 Y-10.252 E.01643 G1 X35.5 Y3.324 E.59073 G1 X35.5 Y3.858 E.01643 G1 X21.39 Y-10.252 E.61397 G1 X20.856 Y-10.252 E.01643 G1 X35.5 Y4.392 E.6372 G1 X35.5 Y4.926 E.01643 G1 X20.322 Y-10.252 E.66043 G1 X19.788 Y-10.252 E.01643 G1 X35.5 Y5.46 E.68367 G1 X35.5 Y5.994 E.01643 G1 X19.254 Y-10.252 E.7069 G1 X18.72 Y-10.252 E.01643 G1 X35.5 Y6.528 E.73014 G1 X35.5 Y7.062 E.01643 G1 X18.186 Y-10.252 E.75337 G1 X17.652 Y-10.252 E.01643 G1 X35.5 Y7.596 E.77661 G1 X35.5 Y8.13 E.01643 G1 X17.118 Y-10.252 E.79984 G1 X16.584 Y-10.252 E.01643 G1 X35.5 Y8.664 E.82308 G1 X35.5 Y9.198 E.01643 G1 X16.05 Y-10.252 E.84631 G1 X15.516 Y-10.252 E.01643 G1 X35.5 Y9.732 E.86955 G1 X35.5 Y10.266 E.01643 G1 X14.982 Y-10.252 E.89278 G1 X14.448 Y-10.252 E.01643 G1 X35.5 Y10.8 E.91601 G1 X35.5 Y11.334 E.01643 G1 X13.914 Y-10.252 E.93925 G1 X13.38 Y-10.252 E.01643 G1 X35.5 Y11.868 E.96248 G1 X35.5 Y12.402 E.01643 G1 X12.846 Y-10.252 E.98572 G1 X12.312 Y-10.252 E.01643 G1 X35.5 Y12.936 E1.00895 G1 X35.5 Y13.47 E.01643 G1 X11.778 Y-10.252 E1.03219 G1 X11.245 Y-10.252 E.01643 G1 X35.5 Y14.004 E1.05542 G1 X35.5 Y14.538 E.01643 G1 X10.711 Y-10.252 E1.07866 G1 X10.177 Y-10.252 E.01643 G1 X35.5 Y15.072 E1.10189 G1 X35.5 Y15.606 E.01643 G1 X9.643 Y-10.252 E1.12512 G1 X9.109 Y-10.252 E.01643 G1 X35.5 Y16.14 E1.14836 G1 X35.5 Y16.674 E.01643 G1 X8.575 Y-10.252 E1.17159 G1 X8.041 Y-10.252 E.01643 G1 X35.5 Y17.208 E1.19483 G1 X35.5 Y17.742 E.01643 G1 X7.507 Y-10.252 E1.21806 G1 X6.973 Y-10.252 E.01643 G1 X35.5 Y18.276 E1.2413 G1 X35.5 Y18.81 E.01643 G1 X6.439 Y-10.252 E1.26453 G1 X5.905 Y-10.252 E.01643 G1 X35.5 Y19.344 E1.28777 G1 X35.5 Y19.878 E.01643 G1 X5.371 Y-10.252 E1.311 G1 X4.837 Y-10.252 E.01643 G1 X35.5 Y20.412 E1.33424 G1 X35.5 Y20.946 E.01643 G1 X4.303 Y-10.252 E1.35747 G1 X3.769 Y-10.252 E.01643 G1 X35.5 Y21.48 E1.3807 G1 X35.5 Y22.013 E.01643 G1 X3.6 Y-9.887 E1.38806 G1 X3.6 Y-9.353 E.01643 G1 X35.5 Y22.547 E1.38806 G1 X35.5 Y23.081 E.01643 G1 X3.6 Y-8.819 E1.38806 G1 X3.6 Y-8.285 E.01643 G1 X35.5 Y23.615 E1.38806 G1 X35.5 Y24.149 E.01643 G1 X3.6 Y-7.751 E1.38806 G1 X3.6 Y-7.217 E.01643 G1 X35.5 Y24.683 E1.38806 G1 X35.5 Y25.217 E.01643 G1 X3.6 Y-6.683 E1.38806 G1 X3.6 Y-6.149 E.01643 G1 X35.5 Y25.751 E1.38806 G1 X35.5 Y26.285 E.01643 G1 X3.6 Y-5.615 E1.38806 G1 X3.6 Y-5.081 E.01643 G1 X35.5 Y26.819 E1.38806 G1 X35.5 Y27.353 E.01643 G1 X3.6 Y-4.547 E1.38806 G1 X3.6 Y-4.013 E.01643 G1 X35.5 Y27.887 E1.38806 G1 X35.5 Y28.421 E.01643 G1 X3.6 Y-3.479 E1.38806 G1 X3.6 Y-2.945 E.01643 G1 X35.5 Y28.955 E1.38806 G1 X35.5 Y29.489 E.01643 G1 X3.6 Y-2.411 E1.38806 G1 X3.6 Y-1.877 E.01643 G1 X35.5 Y30.023 E1.38806 G1 X35.5 Y30.557 E.01643 G1 X3.6 Y-1.343 E1.38806 G1 X3.6 Y-.809 E.01643 G1 X35.5 Y31.091 E1.38806 G1 X35.5 Y31.625 E.01643 G1 X3.6 Y-.275 E1.38806 G1 X3.6 Y.259 E.01643 G1 X35.5 Y32.159 E1.38806 G1 X35.5 Y32.693 E.01643 G1 X3.6 Y.793 E1.38806 G1 X3.6 Y1.327 E.01643 G1 X35.5 Y33.227 E1.38806 G1 X35.5 Y33.761 E.01643 G1 X3.6 Y1.86 E1.38806 G1 X3.6 Y2.394 E.01643 G1 X35.5 Y34.295 E1.38806 G1 X35.5 Y34.829 E.01643 G1 X3.6 Y2.928 E1.38806 G1 X3.6 Y3.462 E.01643 G1 X35.5 Y35.363 E1.38806 G1 X35.5 Y35.897 E.01643 G1 X3.6 Y3.996 E1.38806 G1 X3.6 Y4.53 E.01643 G1 X35.5 Y36.431 E1.38806 G1 X35.5 Y36.965 E.01643 G1 X3.6 Y5.064 E1.38806 G1 X3.6 Y5.598 E.01643 G1 X35.5 Y37.499 E1.38806 G1 X35.5 Y38.033 E.01643 G1 X3.6 Y6.132 E1.38806 G1 X3.6 Y6.666 E.01643 G1 X35.5 Y38.567 E1.38806 G1 X35.5 Y39.039 E.01453 G3 X35.45 Y39.05 I-.031 J-.02 E.00177 G1 X3.6 Y7.2 E1.38586 G1 X3.6 Y7.734 E.01643 G1 X34.916 Y39.05 E1.36263 G1 X34.382 Y39.05 E.01643 G1 X3.6 Y8.268 E1.3394 G1 X3.6 Y8.802 E.01643 G1 X33.848 Y39.05 E1.31616 G1 X33.703 Y39.05 E.00444 G1 X33.509 Y39.245 E.00848 G1 X3.6 Y9.336 E1.3014 G1 X3.6 Y9.87 E.01643 G1 X33.5 Y39.771 E1.30104 G1 X33.5 Y40.305 E.01643 G1 X3.6 Y10.404 E1.30104 G1 X3.6 Y10.938 E.01643 G1 X33.114 Y40.452 E1.28421 G1 X32.58 Y40.452 E.01643 G1 X3.6 Y11.472 E1.26098 G1 X3.6 Y12.006 E.01643 G1 X32.046 Y40.452 E1.23774 G1 X31.512 Y40.452 E.01643 G1 X3.6 Y12.54 E1.21451 G1 X3.6 Y13.074 E.01643 G1 X30.978 Y40.452 E1.19127 G1 X30.444 Y40.452 E.01643 G1 X3.6 Y13.608 E1.16804 G1 X3.6 Y14.142 E.01643 G1 X29.91 Y40.452 E1.14481 G1 X29.376 Y40.452 E.01643 G1 X3.6 Y14.676 E1.12157 G1 X3.6 Y15.21 E.01643 G1 X28.842 Y40.452 E1.09834 G1 X28.308 Y40.452 E.01643 G1 X3.6 Y15.744 E1.0751 G1 X3.6 Y16.278 E.01643 G1 X27.774 Y40.452 E1.05187 G1 X27.24 Y40.452 E.01643 G1 X3.6 Y16.812 E1.02863 G1 X3.6 Y17.346 E.01643 G1 X26.706 Y40.452 E1.0054 G1 X26.172 Y40.452 E.01643 G1 X3.6 Y17.88 E.98216 G1 X3.6 Y18.414 E.01643 G1 X25.638 Y40.452 E.95893 G1 X25.104 Y40.452 E.01643 G1 X3.6 Y18.948 E.9357 G1 X3.6 Y19.482 E.01643 G1 X24.57 Y40.452 E.91246 G1 X24.036 Y40.452 E.01643 G1 X3.6 Y20.016 E.88923 G1 X3.6 Y20.55 E.01643 G1 X23.502 Y40.452 E.86599 G1 X22.968 Y40.452 E.01643 G1 X3.6 Y21.084 E.84276 G1 X3.6 Y21.618 E.01643 G1 X22.434 Y40.452 E.81952 G1 X21.9 Y40.452 E.01643 G1 X3.6 Y22.152 E.79629 G1 X3.6 Y22.686 E.01643 G1 X21.366 Y40.452 E.77305 G1 X20.832 Y40.452 E.01643 G1 X3.6 Y23.22 E.74982 G1 X3.6 Y23.754 E.01643 G1 X20.298 Y40.452 E.72658 G1 X19.764 Y40.452 E.01643 G1 X3.6 Y24.287 E.70335 G1 X3.6 Y24.821 E.01643 G1 X19.23 Y40.452 E.68012 G1 X18.696 Y40.452 E.01643 G1 X3.6 Y25.355 E.65688 G1 X3.6 Y25.889 E.01643 G1 X18.162 Y40.452 E.63365 G1 X17.628 Y40.452 E.01643 G1 X3.6 Y26.423 E.61041 G1 X3.6 Y26.957 E.01643 G1 X17.094 Y40.452 E.58718 G1 X16.56 Y40.452 E.01643 G1 X3.6 Y27.491 E.56394 G1 X3.6 Y28.025 E.01643 G1 X16.026 Y40.452 E.54071 G1 X15.492 Y40.452 E.01643 G1 X3.6 Y28.559 E.51747 G1 X3.6 Y29.093 E.01643 G1 X14.958 Y40.452 E.49424 G1 X14.424 Y40.452 E.01643 G1 X3.6 Y29.627 E.47101 G1 X3.6 Y30.161 E.01643 G1 X13.89 Y40.452 E.44777 G1 X13.356 Y40.452 E.01643 G1 X3.6 Y30.695 E.42454 G1 X3.6 Y31.229 E.01643 G1 X12.822 Y40.452 E.4013 G1 X12.289 Y40.452 E.01643 G1 X3.6 Y31.763 E.37807 G1 X3.6 Y32.297 E.01643 G1 X11.755 Y40.452 E.35483 G1 X11.221 Y40.452 E.01643 G1 X3.6 Y32.831 E.3316 G1 X3.6 Y33.365 E.01643 G1 X10.687 Y40.452 E.30836 G1 X10.153 Y40.452 E.01643 G1 X3.6 Y33.899 E.28513 G1 X3.6 Y34.433 E.01643 G1 X9.619 Y40.452 E.26189 G1 X9.085 Y40.452 E.01643 G1 X3.6 Y34.967 E.23866 G1 X3.6 Y35.501 E.01643 G1 X8.551 Y40.452 E.21543 G1 X8.017 Y40.452 E.01643 G1 X3.6 Y36.035 E.19219 G1 X3.6 Y36.569 E.01643 G1 X7.483 Y40.452 E.16896 G1 X6.949 Y40.452 E.01643 G1 X3.6 Y37.103 E.14572 G1 X3.6 Y37.637 E.01643 G1 X6.415 Y40.452 E.12249 G1 X5.881 Y40.452 E.01643 G1 X3.6 Y38.171 E.09925 G1 X3.6 Y38.705 E.01643 G1 X5.347 Y40.452 E.07602 G1 X4.813 Y40.452 E.01643 G1 X3.6 Y39.239 E.05278 G1 X3.6 Y39.773 E.01643 G1 X4.449 Y40.622 E.03693 ;LAYER_CHANGE ;Z:1.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.6 Y39.773 G1 X3.6 Y39.239 G1 X3.788 Y39.427 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.6 I.277 J-1.185 P1 F30000 G1 X-31.398 Y31.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.031 Y25.231 Z1.6 F30000 G1 X-64.59 Y-6.462 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.607 Y-6.68 E.00727 G3 X-63.274 Y-8.67 I2.152 J0 E.08425 G3 X-62.714 Y-8.817 I.797 J1.9 E.01929 G3 X-64.588 Y-6.399 I.259 J2.137 E.33572 G1 X-64.589 Y-6.422 E.00077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y-6.488 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.203 Y-6.68 E.00639 G3 X-62.899 Y-8.368 I1.744 J0 E.07613 G1 X-62.662 Y-8.412 E.00798 G3 X-64.188 Y-6.448 I.204 J1.732 E.27175 G1 X-63.749 Y-6.521 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.754 Y-6.852 E.01018 G3 X-62.788 Y-7.946 I1.298 J.172 E.04758 G1 X-62.608 Y-7.98 E.00564 G3 X-63.75 Y-6.482 I.151 J1.3 E.18808 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.754 Y-6.852 G1 X-63.716 Y-7.02 G1 X-63.585 Y-7.335 G1 X-63.489 Y-7.479 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.788 Y-7.946 G1 X-62.702 Y-7.962 ;WIPE_END G1 X-55.1 Y-7.281 Z1.6 F30000 G1 X-40.422 Y-5.966 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.465 Y-5.858 E.00385 G3 X-43.274 Y-8.67 I-1.989 J-.822 E.28056 G3 X-42.714 Y-8.817 I.797 J1.9 E.01929 G3 X-40.375 Y-6.124 I.259 J2.137 E.13945 G1 X-40.411 Y-6.004 E.00416 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.808 Y-6.096 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.846 Y-6.015 E.00297 G3 X-42.899 Y-8.368 I-1.613 J-.665 E.2353 G1 X-42.662 Y-8.412 E.00798 G3 X-40.773 Y-6.231 I.204 J1.732 E.11275 G1 X-40.798 Y-6.135 E.00327 G1 X-41.22 Y-6.236 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.246 Y-6.181 E.00187 G3 X-42.788 Y-7.946 I-1.21 J-.499 E.1635 G1 X-42.608 Y-7.98 E.00564 G3 X-41.192 Y-6.343 I.151 J1.3 E.07832 G1 X-41.209 Y-6.275 E.00215 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.246 Y-6.181 G1 X-41.41 Y-5.882 G1 X-41.523 Y-5.753 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.806 Y-5.421 ;WIPE_END G1 X-35.191 Y-5.946 Z1.6 F30000 G1 X-16.24 Y-7.252 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.398 Y-7.252 E.02793 G1 X-15.398 Y-1.748 E.18258 G1 X-20.002 Y-1.748 E.15273 G1 X-20.002 Y-7.252 E.18258 G1 X-16.28 Y-7.252 E.12347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.24 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.805 Y-6.845 E.01443 G1 X-15.805 Y-2.155 E.15558 G1 X-19.595 Y-2.155 E.12572 G1 X-19.595 Y-6.845 E.15558 G1 X-16.28 Y-6.845 E.10996 G1 X-16.24 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-17.216 Y3.162 Z1.6 F30000 G1 X-20.002 Y25.21 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.224 Y29.656 Z1.6 F30000 G1 X-33.17 Y45.346 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.274 Y45.31 E.00366 G3 X-33.274 Y41.33 I.82 J-1.99 E.16849 G3 X-32.714 Y41.183 I.797 J1.901 E.01929 G3 X-33.007 Y45.4 I.259 J2.137 E.2515 G1 X-33.132 Y45.358 E.00436 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.039 Y44.96 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.119 Y44.935 E.00278 G3 X-32.899 Y41.632 I.66 J-1.615 E.14456 G1 X-32.662 Y41.588 E.00798 G3 X-32.902 Y45.007 I.204 J1.732 E.20344 G1 X-33.001 Y44.973 E.00348 G1 X-32.9 Y44.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.106 Y44.456 E.00684 G3 X-32.788 Y42.054 I.65 J-1.136 E.09515 G1 X-32.608 Y42.02 E.00564 G3 X-32.789 Y44.586 I.152 J1.3 E.14136 G1 X-32.863 Y44.555 E.00245 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.106 Y44.456 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.974 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.706 Y42.957 ;WIPE_END G1 X-41.325 Y43.419 Z1.6 F30000 G1 X-73.157 Y45.35 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.274 Y45.31 E.00411 G3 X-73.274 Y41.33 I.82 J-1.99 E.16849 G3 X-72.714 Y41.183 I.797 J1.901 E.01929 G3 X-73.007 Y45.4 I.259 J2.137 E.2515 M73 P16 R92 G1 X-73.119 Y45.363 E.00391 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.026 Y44.965 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.119 Y44.935 E.00322 G3 X-72.899 Y41.632 I.66 J-1.615 E.14456 G1 X-72.662 Y41.588 E.00798 G3 X-72.902 Y45.007 I.204 J1.732 E.20344 G1 X-72.988 Y44.978 E.00303 G1 X-72.887 Y44.545 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.106 Y44.456 E.00725 G3 X-72.788 Y42.054 I.65 J-1.136 E.09515 G1 X-72.608 Y42.02 E.00564 G3 X-72.789 Y44.586 I.152 J1.3 E.14136 G1 X-72.851 Y44.56 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.106 Y44.456 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.749 Y43.491 G1 X-73.76 Y43.32 G1 X-73.716 Y42.981 G1 X-73.711 Y42.97 ;WIPE_END G1 X-77.868 Y36.568 Z1.6 F30000 G1 X-88.66 Y19.948 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-87.203 Y13.189 Z1.6 F30000 G1 X-88.66 Y-7.252 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y-7.252 E.1248 G1 X-84.898 Y-1.748 E.18258 G1 X-89.502 Y-1.748 E.15273 G1 X-89.502 Y-7.252 E.18258 G1 X-88.7 Y-7.252 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y-6.845 E.11129 G1 X-85.305 Y-2.155 E.15558 G1 X-89.095 Y-2.155 E.12572 G1 X-89.095 Y-6.845 E.15558 G1 X-88.7 Y-6.845 E.0131 G1 X-88.66 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-79.052 Y-7.007 Z1.6 F30000 G1 X-17.443 Y-11.948 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-14.002 Y-8.507 I1.497 J1.945 E.27679 G1 X-14.002 Y49.948 E1.93905 G1 X-15.685 Y49.948 E.05584 G2 X-20.215 Y49.948 I-2.265 J-.944 E.31997 G1 X-84.685 Y49.948 E2.13862 G2 X-89.215 Y49.948 I-2.265 J-.944 E.31997 G1 X-90.898 Y49.948 E.05584 G1 X-90.898 Y-8.507 E1.93905 G2 X-87.457 Y-11.948 I1.947 J-1.494 E.27712 G1 X-84.398 Y-11.948 E.10147 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-17.483 Y-11.948 E.10014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.685 Y-11.735 G1 X-17.897 Y-11.494 G1 X-18.076 Y-11.227 G1 X-18.218 Y-10.939 G1 X-18.321 Y-10.635 G1 X-18.383 Y-10.32 G1 X-18.39 Y-10.219 ;WIPE_END G1 X-15.426 Y-11.978 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.422 Y-11.971 E.00027 G3 X-16.973 Y-11.772 I-.536 J1.971 E.37256 G3 X-16.147 Y-12.033 I1 J1.725 E.02898 G3 X-15.684 Y-12.024 I.189 J2.034 E.0154 G1 X-15.465 Y-11.985 E.00736 G1 X-15.535 Y-11.551 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-16.566 Y-11.488 I-.423 J1.551 E.27811 G3 X-16.118 Y-11.599 I.67 J1.733 E.01422 G3 X-15.573 Y-11.561 I.161 J1.6 E.01687 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.334 Y-11.488 G1 X-15.145 Y-11.395 G1 X-14.97 Y-11.278 G1 X-14.811 Y-11.139 G1 X-14.672 Y-10.98 G1 X-14.555 Y-10.805 G1 X-14.462 Y-10.616 G1 X-14.394 Y-10.417 G1 X-14.353 Y-10.21 G1 X-14.349 Y-10.146 ;WIPE_END G1 X-14.457 Y-11.948 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-14.002 Y-11.948 E.01508 G1 X-14.002 Y-11.493 E.01508 G2 X-14.425 Y-11.923 I-1.955 J1.5 E.02007 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-14.002 Y-11.948 G1 X-14.002 Y-11.493 G1 X-14.215 Y-11.735 G1 X-14.425 Y-11.923 ;WIPE_END G1 X-22.049 Y-11.55 Z1.6 F30000 G1 X-89.968 Y-8.225 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-89.974 Y-8.227 E.00019 G3 X-89.973 Y-11.772 I1.016 J-1.773 E.1424 G3 X-89.147 Y-12.033 I1 J1.725 E.02898 G3 X-89.733 Y-8.109 I.189 J2.034 E.24553 G1 X-89.932 Y-8.208 E.00737 G1 X-89.756 Y-8.604 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-89.566 Y-11.488 I.798 J-1.396 E.11037 G3 X-89.118 Y-11.599 I.67 J1.733 E.01422 G3 X-89.721 Y-8.584 I.161 J1.6 E.18461 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-89.93 Y-8.722 G1 X-90.089 Y-8.861 G1 X-90.228 Y-9.02 G1 X-90.345 Y-9.195 G1 X-90.438 Y-9.384 G1 X-90.506 Y-9.583 G1 X-90.547 Y-9.79 G1 X-90.56 Y-10 G1 X-90.547 Y-10.21 G1 X-90.534 Y-10.273 ;WIPE_END G1 X-90.898 Y-11.493 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-90.898 Y-11.948 E.01508 G1 X-90.443 Y-11.948 E.01508 G1 X-90.685 Y-11.735 E.01069 G1 X-90.872 Y-11.523 E.00936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-90.898 Y-11.948 G1 X-90.443 Y-11.948 G1 X-90.685 Y-11.735 G1 X-90.872 Y-11.523 ;WIPE_END G1 X-83.24 Y-11.612 Z1.6 F30000 G1 X-19.66 Y-12.355 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-13.595 Y-12.355 E.20119 G1 X-13.595 Y50.355 E2.08021 G1 X-16.399 Y50.355 E.09303 G2 X-16.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-19.863 Y49.716 I-1.446 J1.446 E.18414 G2 X-19.501 Y50.355 I2.396 J-.939 E.02445 G1 X-85.399 Y50.355 E2.18599 G2 X-85.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-88.722 Y50.023 I-1.444 J1.451 E.19524 G1 X-88.501 Y50.355 E.01324 G1 X-91.305 Y50.355 E.09303 G1 X-91.305 Y-12.355 E2.08021 G1 X-84.805 Y-12.355 E.21562 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-19.7 Y-12.355 E.0131 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.7 Y-12.355 ;WIPE_END G1 X-17.902 Y-4.725 Z1.6 F30000 G1 X-19.346 Y49.802 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.459 Y49.58 E.00767 G3 X-18.566 Y47.512 I1.502 J-.578 E.07664 G3 X-18.118 Y47.401 I.67 J1.733 E.01422 G3 X-19.333 Y49.836 I.161 J1.601 E.21095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.459 Y49.58 G1 X-19.506 Y49.417 G1 X-19.547 Y49.21 G1 X-19.56 Y49 G1 X-19.547 Y48.79 G1 X-19.506 Y48.583 G1 X-19.438 Y48.384 G1 X-19.345 Y48.195 G1 X-19.228 Y48.02 G1 X-19.182 Y47.967 ;WIPE_END G1 X-26.811 Y48.169 Z1.6 F30000 G1 X-88.347 Y49.801 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-88.459 Y49.58 E.00762 G3 X-87.566 Y47.512 I1.502 J-.578 E.07664 G3 X-87.118 Y47.401 I.67 J1.733 E.01422 G3 X-88.333 Y49.836 I.161 J1.601 E.21098 M73 P16 R91 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-88.459 Y49.58 G1 X-88.506 Y49.417 G1 X-88.547 Y49.21 G1 X-88.56 Y49 G1 X-88.547 Y48.79 G1 X-88.506 Y48.583 G1 X-88.438 Y48.384 G1 X-88.345 Y48.195 G1 X-88.228 Y48.02 G1 X-88.181 Y47.966 ;WIPE_END G1 X-82.47 Y42.903 Z1.6 F30000 G1 X-19.66 Y-12.79 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-91.74 Y50.79 E2.41454 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-14.969 Y-6.85 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.491347 G1 F15000 G1 X-14.429 Y-7.06 E.02117 G1 X-14.429 Y-7.561 E.01833 G1 X-14.969 Y-7.306 E.02183 G1 X-14.969 Y-6.89 E.0152 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.785 Y-8.28 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.485814 G1 F15000 G2 X-18.31 Y-7.676 I4.004 J-2.655 E.02777 G1 X-17.612 Y-7.676 E.0252 G1 X-18.004 Y-7.986 E.01806 G1 X-18.427 Y-8.537 E.02505 G1 X-18.721 Y-9.228 E.0271 G1 X-18.827 Y-9.971 E.0271 G1 X-18.736 Y-10.717 E.0271 G3 X-18.39 Y-11.52 I4.644 J1.524 E.03162 G1 X-18.89 Y-11.52 E.01806 G1 X-19.134 Y-10.928 E.02311 G2 X-19.265 Y-9.929 I3.43 J.959 E.0365 G1 X-19.171 Y-9.212 E.02609 G2 X-18.803 Y-8.316 I3.309 J-.837 E.03507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.427 Y-6.584 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-15.187 Y-6.341 I-1.61 J-3.729 E.0265 G1 X-15.187 Y-5.513 E.02748 G1 X-14.59 Y-5.326 E.02074 G1 X-14.213 Y-5.37 E.0126 G1 X-14.213 Y-2.823 E.08449 G3 X-15.187 Y-2.776 I-.54 J-1.058 E.03332 G1 X-15.187 Y-4.404 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-15.187 Y-2.776 G1 X-14.818 Y-2.732 ;WIPE_END G1 X-17.021 Y-10.039 Z1.6 F30000 G1 X-20.713 Y-22.282 Z1.6 G1 Z1.2 G1 E.8 F1800 G1 F16200 G1 X-20.713 Y-23.91 E.05401 G3 X-21.745 Y-24.737 I4.107 J-6.184 E.04391 G1 X-23.349 Y-24.737 E.0532 G2 X-24.418 Y-23.876 I4.28 J6.41 E.04559 G3 X-26.383 Y-24.218 I-.756 J-1.475 E.07101 G1 X-26.986 Y-24.737 E.0264 G1 X-28.59 Y-24.737 E.0532 G2 X-29.659 Y-23.876 I4.28 J6.41 E.04559 G3 X-31.625 Y-24.218 I-.756 J-1.475 E.07101 G1 X-32.228 Y-24.737 E.0264 G1 X-33.831 Y-24.737 E.0532 G2 X-34.9 Y-23.876 I4.28 J6.41 E.04559 G3 X-36.866 Y-24.218 I-.756 J-1.475 E.07101 G1 X-37.469 Y-24.737 E.0264 G1 X-39.073 Y-24.737 E.0532 G2 X-40.142 Y-23.876 I4.28 J6.41 E.04559 G3 X-42.107 Y-24.218 I-.756 J-1.475 E.07101 G1 X-42.71 Y-24.737 E.0264 G1 X-44.314 Y-24.737 E.0532 G2 X-45.383 Y-23.876 I4.28 J6.41 E.04559 G3 X-47.348 Y-24.218 I-.756 J-1.475 E.07101 G1 X-47.951 Y-24.737 E.0264 G1 X-49.555 Y-24.737 E.0532 G2 X-50.624 Y-23.876 I4.28 J6.41 E.04559 G3 X-52.59 Y-24.218 I-.756 J-1.475 E.07101 G1 X-53.193 Y-24.737 E.0264 G1 X-54.796 Y-24.737 E.0532 G2 X-55.866 Y-23.876 I4.28 J6.41 E.04559 G3 X-57.831 Y-24.218 I-.756 J-1.475 E.07101 G1 X-58.434 Y-24.737 E.0264 G1 X-60.038 Y-24.737 E.0532 G2 X-61.107 Y-23.876 I4.28 J6.41 E.04559 G3 X-63.072 Y-24.218 I-.756 J-1.475 E.07101 G1 X-63.675 Y-24.737 E.0264 G1 X-65.279 Y-24.737 E.0532 G2 X-66.348 Y-23.876 I4.28 J6.41 E.04559 G3 X-68.314 Y-24.218 I-.756 J-1.475 E.07101 G1 X-68.917 Y-24.737 E.0264 G1 X-70.52 Y-24.737 E.0532 G2 X-71.59 Y-23.876 I4.28 J6.41 E.04559 G3 X-73.555 Y-24.218 I-.756 J-1.475 E.07101 G1 X-74.158 Y-24.737 E.0264 G1 X-75.762 Y-24.737 E.0532 G2 X-76.831 Y-23.876 I4.28 J6.41 E.04559 G3 X-78.796 Y-24.218 I-.756 J-1.475 E.07101 G1 X-79.399 Y-24.737 E.0264 G1 X-81.003 Y-24.737 E.0532 G2 X-82.072 Y-23.876 I4.28 J6.41 E.04559 G3 X-84.038 Y-24.218 I-.756 J-1.475 E.07101 G1 X-84.187 Y-24.346 E.00653 G1 X-84.187 Y-21.927 E.08026 G3 X-83.382 Y-21.255 I-3.352 J4.835 E.0348 G2 X-81.417 Y-21.597 I.756 J-1.475 E.07101 G1 X-80.762 Y-22.161 E.02868 G3 X-78.796 Y-21.82 I.756 J1.475 E.07101 G1 X-78.141 Y-21.255 E.02868 G2 X-76.176 Y-21.597 I.756 J-1.475 E.07101 G1 X-75.52 Y-22.161 E.02868 G3 X-73.555 Y-21.82 I.756 J1.475 E.07101 G1 X-72.9 Y-21.255 E.02868 G2 X-70.934 Y-21.597 I.756 J-1.475 E.07101 G1 X-70.279 Y-22.161 E.02868 G3 X-68.314 Y-21.82 I.756 J1.475 E.07101 G1 X-67.659 Y-21.255 E.02868 G2 X-65.693 Y-21.597 I.756 J-1.475 E.07101 G1 X-65.038 Y-22.161 E.02868 G3 X-63.072 Y-21.82 I.756 J1.475 E.07101 G1 X-62.417 Y-21.255 E.02868 G2 X-60.452 Y-21.597 I.756 J-1.475 E.07101 G1 X-59.797 Y-22.161 E.02868 G3 X-57.831 Y-21.82 I.756 J1.475 E.07101 G1 X-57.176 Y-21.255 E.02868 G2 X-55.21 Y-21.597 I.756 J-1.475 E.07101 G1 X-54.555 Y-22.161 E.02868 G3 X-52.59 Y-21.82 I.756 J1.475 E.07101 G1 X-51.935 Y-21.255 E.02868 G2 X-49.969 Y-21.597 I.756 J-1.475 E.07101 G1 X-49.314 Y-22.161 E.02868 G3 X-47.348 Y-21.82 I.756 J1.475 E.07101 G1 X-46.693 Y-21.255 E.02868 G2 X-44.728 Y-21.597 I.756 J-1.475 E.07101 G1 X-44.073 Y-22.161 E.02868 G3 X-42.107 Y-21.82 I.756 J1.475 E.07101 G1 X-41.452 Y-21.255 E.02868 G2 X-39.487 Y-21.597 I.756 J-1.475 E.07101 G1 X-38.831 Y-22.161 E.02868 G3 X-36.866 Y-21.82 I.756 J1.475 E.07101 G1 X-36.211 Y-21.255 E.02868 G2 X-34.245 Y-21.597 I.756 J-1.475 E.07101 G1 X-33.59 Y-22.161 E.02868 G3 X-31.625 Y-21.82 I.756 J1.475 E.07101 G1 X-30.969 Y-21.255 E.02868 G2 X-29.004 Y-21.597 I.756 J-1.475 E.07101 G1 X-28.349 Y-22.161 E.02868 G3 X-26.383 Y-21.82 I.756 J1.475 E.07101 G1 X-25.728 Y-21.255 E.02868 G2 X-23.763 Y-21.597 I.756 J-1.475 E.07101 G1 X-23.107 Y-22.161 E.02868 G3 X-21.142 Y-21.82 I.756 J1.475 E.07101 G1 X-20.713 Y-21.45 E.01877 G1 X-20.713 Y-18.669 E.09226 G3 X-21.797 Y-19.541 I4.333 J-6.499 E.0462 G2 X-23.763 Y-19.199 I-.756 J1.475 E.07101 G1 X-24.418 Y-18.635 E.02868 G3 X-26.383 Y-18.976 I-.756 J-1.475 E.07101 G1 X-27.038 Y-19.541 E.02868 G2 X-29.004 Y-19.199 I-.756 J1.475 E.07101 G1 X-29.659 Y-18.635 E.02868 G3 X-31.625 Y-18.976 I-.756 J-1.475 E.07101 G1 X-32.28 Y-19.541 E.02868 G2 X-34.245 Y-19.199 I-.756 J1.475 E.07101 G1 X-34.9 Y-18.635 E.02868 G3 X-36.866 Y-18.976 I-.756 J-1.475 E.07101 G1 X-37.521 Y-19.541 E.02868 G2 X-39.487 Y-19.199 I-.756 J1.475 E.07101 G1 X-40.142 Y-18.635 E.02868 G3 X-42.107 Y-18.976 I-.756 J-1.475 E.07101 G1 X-42.762 Y-19.541 E.02868 G2 X-44.728 Y-19.199 I-.756 J1.475 E.07101 G1 X-45.383 Y-18.635 E.02868 G3 X-47.348 Y-18.976 I-.756 J-1.475 E.07101 G1 X-48.004 Y-19.541 E.02868 G2 X-49.969 Y-19.199 I-.756 J1.475 E.07101 G1 X-50.624 Y-18.635 E.02868 G3 X-52.59 Y-18.976 I-.756 J-1.475 E.07101 G1 X-53.245 Y-19.541 E.02868 G2 X-55.21 Y-19.199 I-.756 J1.475 E.07101 G1 X-55.866 Y-18.635 E.02868 G3 X-57.831 Y-18.976 I-.756 J-1.475 E.07101 G1 X-58.486 Y-19.541 E.02868 G2 X-60.452 Y-19.199 I-.756 J1.475 E.07101 G1 X-61.107 Y-18.635 E.02868 G3 X-63.072 Y-18.976 I-.756 J-1.475 E.07101 G1 X-63.728 Y-19.541 E.02868 G2 X-65.693 Y-19.199 I-.756 J1.475 E.07101 G1 X-66.348 Y-18.635 E.02868 G3 X-68.314 Y-18.976 I-.756 J-1.475 E.07101 G1 X-68.969 Y-19.541 E.02868 G2 X-70.934 Y-19.199 I-.756 J1.475 E.07101 G1 X-71.59 Y-18.635 E.02868 G3 X-73.555 Y-18.976 I-.756 J-1.475 E.07101 G1 X-74.21 Y-19.541 E.02868 G2 X-76.176 Y-19.199 I-.756 J1.475 E.07101 G1 X-76.831 Y-18.635 E.02868 G3 X-78.796 Y-18.976 I-.756 J-1.475 E.07101 G1 X-79.451 Y-19.541 E.02868 G2 X-81.417 Y-19.199 I-.756 J1.475 E.07101 G1 X-82.072 Y-18.635 E.02868 G3 X-84.038 Y-18.976 I-.756 J-1.475 E.07101 G1 X-84.187 Y-19.105 E.00653 G1 X-84.187 Y-16.685 E.08026 G3 X-83.382 Y-16.014 I-3.352 J4.835 E.0348 G2 X-81.417 Y-16.356 I.756 J-1.475 E.07101 G1 X-80.762 Y-16.92 E.02868 G3 X-78.796 Y-16.578 I.756 J1.475 E.07101 G1 X-78.141 Y-16.014 E.02868 G2 X-76.176 Y-16.356 I.756 J-1.475 E.07101 G1 X-75.52 Y-16.92 E.02868 G3 X-73.555 Y-16.578 I.756 J1.475 E.07101 G1 X-72.9 Y-16.014 E.02868 G2 X-70.934 Y-16.356 I.756 J-1.475 E.07101 G1 X-70.279 Y-16.92 E.02868 G3 X-68.314 Y-16.578 I.756 J1.475 E.07101 G1 X-67.659 Y-16.014 E.02868 G2 X-65.693 Y-16.356 I.756 J-1.475 E.07101 G1 X-65.038 Y-16.92 E.02868 G3 X-63.072 Y-16.578 I.756 J1.475 E.07101 G1 X-62.417 Y-16.014 E.02868 G2 X-60.452 Y-16.356 I.756 J-1.475 E.07101 G1 X-59.797 Y-16.92 E.02868 G3 X-57.831 Y-16.578 I.756 J1.475 E.07101 G1 X-57.176 Y-16.014 E.02868 G2 X-55.21 Y-16.356 I.756 J-1.475 E.07101 G1 X-54.555 Y-16.92 E.02868 G3 X-52.59 Y-16.578 I.756 J1.475 E.07101 G1 X-51.935 Y-16.014 E.02868 G2 X-49.969 Y-16.356 I.756 J-1.475 E.07101 G1 X-49.314 Y-16.92 E.02868 G3 X-47.348 Y-16.578 I.756 J1.475 E.07101 G1 X-46.693 Y-16.014 E.02868 G2 X-44.728 Y-16.356 I.756 J-1.475 E.07101 G1 X-44.073 Y-16.92 E.02868 G3 X-42.107 Y-16.578 I.756 J1.475 E.07101 G1 X-41.452 Y-16.014 E.02868 G2 X-39.487 Y-16.356 I.756 J-1.475 E.07101 G1 X-38.831 Y-16.92 E.02868 G3 X-36.866 Y-16.578 I.756 J1.475 E.07101 G1 X-36.211 Y-16.014 E.02868 G2 X-34.245 Y-16.356 I.756 J-1.475 E.07101 G1 X-33.59 Y-16.92 E.02868 G3 X-31.625 Y-16.578 I.756 J1.475 E.07101 G1 X-30.969 Y-16.014 E.02868 G2 X-29.004 Y-16.356 I.756 J-1.475 E.07101 G1 X-28.349 Y-16.92 E.02868 G3 X-26.383 Y-16.578 I.756 J1.475 E.07101 G1 X-25.728 Y-16.014 E.02868 G2 X-23.763 Y-16.356 I.756 J-1.475 E.07101 G1 X-23.107 Y-16.92 E.02868 G3 X-21.142 Y-16.578 I.756 J1.475 E.07101 G1 X-20.713 Y-16.209 E.01877 G1 X-20.713 Y-13.428 E.09226 G3 X-21.797 Y-14.299 I4.333 J-6.499 E.0462 G2 X-23.763 Y-13.958 I-.756 J1.475 E.07101 G1 X-24.418 Y-13.393 E.02868 G3 X-26.383 Y-13.735 I-.756 J-1.475 E.07101 G1 X-27.038 Y-14.299 E.02868 G2 X-29.004 Y-13.958 I-.756 J1.475 E.07101 G1 X-29.659 Y-13.393 E.02868 G3 X-31.625 Y-13.735 I-.756 J-1.475 E.07101 G1 X-32.28 Y-14.299 E.02868 G2 X-34.245 Y-13.958 I-.756 J1.475 E.07101 G1 X-34.9 Y-13.393 E.02868 G3 X-36.866 Y-13.735 I-.756 J-1.475 E.07101 G1 X-37.521 Y-14.299 E.02868 G2 X-39.487 Y-13.958 I-.756 J1.475 E.07101 G1 X-40.142 Y-13.393 E.02868 G3 X-42.107 Y-13.735 I-.756 J-1.475 E.07101 G1 X-42.762 Y-14.299 E.02868 G2 X-44.728 Y-13.958 I-.756 J1.475 E.07101 G1 X-45.383 Y-13.393 E.02868 G3 X-47.348 Y-13.735 I-.756 J-1.475 E.07101 G1 X-48.004 Y-14.299 E.02868 G2 X-49.969 Y-13.958 I-.756 J1.475 E.07101 G1 X-50.624 Y-13.393 E.02868 G3 X-52.59 Y-13.735 I-.756 J-1.475 E.07101 G1 X-53.245 Y-14.299 E.02868 G2 X-55.21 Y-13.958 I-.756 J1.475 E.07101 G1 X-55.866 Y-13.393 E.02868 G3 X-57.831 Y-13.735 I-.756 J-1.475 E.07101 G1 X-58.486 Y-14.299 E.02868 G2 X-60.452 Y-13.958 I-.756 J1.475 E.07101 G1 X-61.107 Y-13.393 E.02868 G3 X-63.072 Y-13.735 I-.756 J-1.475 E.07101 G1 X-63.728 Y-14.299 E.02868 G2 X-65.693 Y-13.958 I-.756 J1.475 E.07101 G1 X-66.348 Y-13.393 E.02868 G3 X-68.314 Y-13.735 I-.756 J-1.475 E.07101 G1 X-68.969 Y-14.299 E.02868 G2 X-70.934 Y-13.958 I-.756 J1.475 E.07101 G1 X-71.59 Y-13.393 E.02868 G3 X-73.555 Y-13.735 I-.756 J-1.475 E.07101 G1 X-74.21 Y-14.299 E.02868 G2 X-76.176 Y-13.958 I-.756 J1.475 E.07101 G1 X-76.831 Y-13.393 E.02868 G3 X-78.796 Y-13.735 I-.756 J-1.475 E.07101 G1 X-79.451 Y-14.299 E.02868 G2 X-81.417 Y-13.958 I-.756 J1.475 E.07101 G1 X-82.072 Y-13.393 E.02868 G3 X-84.038 Y-13.735 I-.756 J-1.475 E.07101 G1 X-84.187 Y-13.864 E.00653 G1 X-84.187 Y-11.737 E.07055 G1 X-84.596 Y-11.737 E.01356 G3 X-83.382 Y-10.773 I-4.786 J7.268 E.05147 G2 X-81.417 Y-11.114 I.756 J-1.475 E.07101 G1 X-80.762 Y-11.679 E.02868 G3 X-78.796 Y-11.337 I.756 J1.475 E.07101 G1 X-78.141 Y-10.773 E.02868 G2 X-76.176 Y-11.114 I.756 J-1.475 E.07101 G1 X-75.52 Y-11.679 E.02868 G3 X-73.555 Y-11.337 I.756 J1.475 E.07101 G1 X-72.9 Y-10.773 E.02868 G2 X-70.934 Y-11.114 I.756 J-1.475 E.07101 G1 X-70.279 Y-11.679 E.02868 G3 X-68.314 Y-11.337 I.756 J1.475 E.07101 G1 X-67.659 Y-10.773 E.02868 G2 X-65.693 Y-11.114 I.756 J-1.475 E.07101 G1 X-65.038 Y-11.679 E.02868 G3 X-63.072 Y-11.337 I.756 J1.475 E.07101 G1 X-62.417 Y-10.773 E.02868 G2 X-60.452 Y-11.114 I.756 J-1.475 E.07101 G1 X-59.797 Y-11.679 E.02868 G3 X-57.831 Y-11.337 I.756 J1.475 E.07101 G1 X-57.176 Y-10.773 E.02868 G2 X-55.21 Y-11.114 I.756 J-1.475 E.07101 G1 X-54.555 Y-11.679 E.02868 G3 X-52.59 Y-11.337 I.756 J1.475 E.07101 G1 X-51.935 Y-10.773 E.02868 G2 X-49.969 Y-11.114 I.756 J-1.475 E.07101 G1 X-49.314 Y-11.679 E.02868 G3 X-47.348 Y-11.337 I.756 J1.475 E.07101 G1 X-46.693 Y-10.773 E.02868 G2 X-44.728 Y-11.114 I.756 J-1.475 E.07101 G1 X-44.073 Y-11.679 E.02868 G3 X-42.107 Y-11.337 I.756 J1.475 E.07101 G1 X-41.452 Y-10.773 E.02868 G2 X-39.487 Y-11.114 I.756 J-1.475 E.07101 G1 X-38.831 Y-11.679 E.02868 G3 X-36.866 Y-11.337 I.756 J1.475 E.07101 G1 X-36.211 Y-10.773 E.02868 G2 X-34.245 Y-11.114 I.756 J-1.475 E.07101 G1 X-33.59 Y-11.679 E.02868 G3 X-31.625 Y-11.337 I.756 J1.475 E.07101 G1 X-30.969 Y-10.773 E.02868 G2 X-29.004 Y-11.114 I.756 J-1.475 E.07101 G1 X-28.349 Y-11.679 E.02868 G3 X-26.383 Y-11.337 I.756 J1.475 E.07101 G1 X-25.728 Y-10.773 E.02868 G2 X-23.763 Y-11.114 I.756 J-1.475 E.07101 G1 X-23.107 Y-11.679 E.02868 G3 X-21.142 Y-11.337 I.756 J1.475 E.07101 G1 X-20.487 Y-10.773 E.02868 G1 X-19.832 Y-10.567 E.02278 G1 X-19.643 Y-10.589 E.0063 G2 X-19.202 Y-8.144 I3.648 J.604 E.08406 G3 X-21.142 Y-8.494 I-.736 J-1.472 E.07012 G1 X-21.797 Y-9.058 E.02868 G2 X-23.763 Y-8.716 I-.756 J1.475 E.07101 G1 X-24.418 Y-8.152 E.02868 G3 X-26.383 Y-8.494 I-.756 J-1.475 E.07101 G1 X-27.038 Y-9.058 E.02868 G2 X-29.004 Y-8.716 I-.756 J1.475 E.07101 G1 X-29.659 Y-8.152 E.02868 G3 X-31.625 Y-8.494 I-.756 J-1.475 E.07101 G1 X-32.28 Y-9.058 E.02868 G2 X-34.245 Y-8.716 I-.756 J1.475 E.07101 G1 X-34.9 Y-8.152 E.02868 G3 X-36.866 Y-8.494 I-.756 J-1.475 E.07101 G1 X-37.521 Y-9.058 E.02868 G2 X-39.487 Y-8.716 I-.756 J1.475 E.07101 G1 X-40.142 Y-8.152 E.02868 G1 X-40.516 Y-8.035 E.01301 G2 X-42.762 Y-9.058 I-2.077 J1.583 E.08529 G2 X-44.728 Y-8.716 I-.756 J1.475 E.07101 G1 X-45.383 Y-8.152 E.02868 G3 X-47.348 Y-8.494 I-.756 J-1.475 E.07101 G1 X-48.004 Y-9.058 E.02868 G2 X-49.969 Y-8.716 I-.756 J1.475 E.07101 G1 X-50.624 Y-8.152 E.02868 G3 X-52.59 Y-8.494 I-.756 J-1.475 E.07101 G1 X-53.245 Y-9.058 E.02868 G2 X-55.21 Y-8.716 I-.756 J1.475 E.07101 G1 X-55.866 Y-8.152 E.02868 G3 X-57.831 Y-8.494 I-.756 J-1.475 E.07101 G1 X-58.486 Y-9.058 E.02868 G2 X-60.452 Y-8.716 I-.756 J1.475 E.07101 G1 X-60.825 Y-8.395 E.01634 G3 X-60.152 Y-6.131 I-1.638 J1.719 E.082 G1 X-59.797 Y-6.437 E.01557 G3 X-57.831 Y-6.096 I.756 J1.475 E.07101 G1 X-57.176 Y-5.531 E.02868 G2 X-55.21 Y-5.873 I.756 J-1.475 E.07101 G1 X-54.555 Y-6.437 E.02868 G3 X-52.59 Y-6.096 I.756 J1.475 E.07101 G1 X-51.935 Y-5.531 E.02868 G2 X-49.969 Y-5.873 I.756 J-1.475 E.07101 G1 X-49.314 Y-6.437 E.02868 G3 X-47.348 Y-6.096 I.756 J1.475 E.07101 G1 X-46.693 Y-5.531 E.02868 G2 X-44.728 Y-5.873 I.756 J-1.475 E.07101 G1 X-44.682 Y-5.912 E.00199 G2 X-40.491 Y-5.362 I2.236 J-.795 E.17296 G1 X-40.142 Y-5.404 E.01168 G2 X-38.831 Y-6.437 I-5.127 J-7.846 E.05544 G3 X-36.866 Y-6.096 I.756 J1.475 E.07101 G1 X-36.211 Y-5.531 E.02868 G2 X-34.245 Y-5.873 I.756 J-1.475 E.07101 G1 X-33.59 Y-6.437 E.02868 G3 X-31.625 Y-6.096 I.756 J1.475 E.07101 G1 X-30.969 Y-5.531 E.02868 G2 X-29.004 Y-5.873 I.756 J-1.475 E.07101 G1 X-28.349 Y-6.437 E.02868 G3 X-26.383 Y-6.096 I.756 J1.475 E.07101 G1 X-25.728 Y-5.531 E.02868 G2 X-23.763 Y-5.873 I.756 J-1.475 E.07101 G1 X-23.107 Y-6.437 E.02868 G3 X-21.142 Y-6.096 I.756 J1.475 E.07101 G1 X-20.487 Y-5.531 E.02868 G1 X-20.213 Y-5.445 E.00952 G1 X-20.213 Y-2.75 E.0894 G1 X-20.487 Y-2.783 E.00914 G3 X-21.797 Y-3.817 I5.127 J-7.846 E.05544 G2 X-23.763 Y-3.475 I-.756 J1.475 E.07101 G1 X-24.418 Y-2.911 E.02868 G3 X-26.383 Y-3.252 I-.756 J-1.475 E.07101 G1 X-27.038 Y-3.817 E.02868 G2 X-29.004 Y-3.475 I-.756 J1.475 E.07101 G1 X-29.659 Y-2.911 E.02868 G3 X-31.625 Y-3.252 I-.756 J-1.475 E.07101 G1 X-32.28 Y-3.817 E.02868 G2 X-34.245 Y-3.475 I-.756 J1.475 E.07101 G1 X-34.9 Y-2.911 E.02868 G3 X-36.866 Y-3.252 I-.756 J-1.475 E.07101 G1 X-37.521 Y-3.817 E.02868 G2 X-39.487 Y-3.475 I-.756 J1.475 E.07101 G1 X-40.142 Y-2.911 E.02868 G3 X-42.107 Y-3.252 I-.756 J-1.475 E.07101 G1 X-42.762 Y-3.817 E.02868 G2 X-44.728 Y-3.475 I-.756 J1.475 E.07101 G1 X-45.383 Y-2.911 E.02868 G3 X-47.348 Y-3.252 I-.756 J-1.475 E.07101 G1 X-48.004 Y-3.817 E.02868 G2 X-49.969 Y-3.475 I-.756 J1.475 E.07101 G1 X-50.624 Y-2.911 E.02868 G3 X-52.59 Y-3.252 I-.756 J-1.475 E.07101 G1 X-53.245 Y-3.817 E.02868 G2 X-55.21 Y-3.475 I-.756 J1.475 E.07101 G1 X-55.866 Y-2.911 E.02868 G3 X-57.831 Y-3.252 I-.756 J-1.475 E.07101 G1 X-58.486 Y-3.817 E.02868 G2 X-60.452 Y-3.475 I-.756 J1.475 E.07101 G1 X-61.107 Y-2.911 E.02868 G3 X-63.072 Y-3.252 I-.756 J-1.475 E.07101 G1 X-63.728 Y-3.817 E.02868 G2 X-65.693 Y-3.475 I-.756 J1.475 E.07101 G1 X-66.348 Y-2.911 E.02868 G3 X-68.314 Y-3.252 I-.756 J-1.475 E.07101 G1 X-68.969 Y-3.817 E.02868 G2 X-70.934 Y-3.475 I-.756 J1.475 E.07101 G1 X-71.59 Y-2.911 E.02868 G3 X-73.555 Y-3.252 I-.756 J-1.475 E.07101 G1 X-74.21 Y-3.817 E.02868 G2 X-76.176 Y-3.475 I-.756 J1.475 E.07101 G1 X-76.831 Y-2.911 E.02868 G3 X-78.796 Y-3.252 I-.756 J-1.475 E.07101 G1 X-79.451 Y-3.817 E.02868 G2 X-81.417 Y-3.475 I-.756 J1.475 E.07101 G1 X-82.072 Y-2.911 E.02868 G3 X-84.038 Y-3.252 I-.756 J-1.475 E.07101 G1 X-84.687 Y-3.812 E.02842 G1 X-84.687 Y-6.561 E.0912 G3 X-83.382 Y-5.531 I-5.106 J7.81 E.0552 G2 X-81.417 Y-5.873 I.756 J-1.475 E.07101 G1 X-80.762 Y-6.437 E.02868 G3 X-78.796 Y-6.096 I.756 J1.475 E.07101 G1 X-78.141 Y-5.531 E.02868 G2 X-76.176 Y-5.873 I.756 J-1.475 E.07101 G1 X-75.52 Y-6.437 E.02868 G3 X-73.555 Y-6.096 I.756 J1.475 E.07101 G1 X-72.9 Y-5.531 E.02868 G2 X-70.934 Y-5.873 I.756 J-1.475 E.07101 G1 X-70.279 Y-6.437 E.02868 G3 X-68.314 Y-6.096 I.756 J1.475 E.07101 G1 X-67.659 Y-5.531 E.02868 G2 X-65.693 Y-5.873 I.756 J-1.475 E.07101 G1 X-65.038 Y-6.437 E.02868 G1 X-64.805 Y-6.511 E.00811 G3 X-63.45 Y-8.819 I2.431 J-.125 E.09401 G1 X-63.728 Y-9.058 E.01215 G2 X-65.693 Y-8.716 I-.756 J1.475 E.07101 G1 X-66.348 Y-8.152 E.02868 G3 X-68.314 Y-8.494 I-.756 J-1.475 E.07101 G1 X-68.969 Y-9.058 E.02868 G2 X-70.934 Y-8.716 I-.756 J1.475 E.07101 G1 X-71.59 Y-8.152 E.02868 G3 X-73.555 Y-8.494 I-.756 J-1.475 E.07101 G1 X-74.21 Y-9.058 E.02868 G2 X-76.176 Y-8.716 I-.756 J1.475 E.07101 G1 X-76.831 Y-8.152 E.02868 G3 X-78.796 Y-8.494 I-.756 J-1.475 E.07101 G1 X-79.451 Y-9.058 E.02868 G2 X-81.417 Y-8.716 I-.756 J1.475 E.07101 G1 X-82.072 Y-8.152 E.02868 G3 X-84.038 Y-8.494 I-.756 J-1.475 E.07101 G1 X-84.693 Y-9.058 E.02868 G1 X-85.29 Y-9.246 E.02076 G3 X-85.945 Y-7.77 I-3.474 J-.661 E.05403 G1 X-89.931 Y-6.85 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.491325 G1 F15000 G1 X-89.931 Y-7.306 E.01666 G1 X-90.411 Y-7.517 E.01918 G1 X-90.471 Y-7.561 E.0027 G1 X-90.471 Y-7.06 E.01832 G1 X-89.968 Y-6.865 E.01971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.635 Y-10.072 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.486028 G1 F15000 G1 X-85.766 Y-10.927 E.03126 G2 X-86.01 Y-11.52 I-3.589 J1.126 E.02318 G1 X-86.51 Y-11.52 E.01807 G1 X-86.179 Y-10.772 E.02954 G1 X-86.073 Y-10.029 E.02712 G1 X-86.169 Y-9.284 E.02712 G1 X-86.445 Y-8.587 E.02707 G3 X-86.936 Y-7.945 I-5.334 J-3.575 E.02919 G1 X-87.287 Y-7.676 E.01596 G1 X-86.589 Y-7.676 E.0252 G1 X-86.122 Y-8.275 E.02743 G1 X-85.845 Y-8.858 E.0233 G1 X-85.669 Y-9.547 E.02567 G1 X-85.638 Y-10.032 E.01754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.713 Y-5.255 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-89.713 Y-3.626 E.05401 G1 X-89.934 Y-3.817 E.00967 G1 X-90.687 Y-4.011 E.02579 G1 X-90.687 Y-1.371 E.08756 G1 X-89.934 Y-1.324 E.02502 G1 X-89.279 Y-.854 E.02674 G2 X-87.313 Y-.162 I1.521 J-1.184 E.07303 G1 X-86.658 Y-.632 E.02674 G3 X-84.693 Y-1.324 I1.521 J1.184 E.07303 G1 X-84.038 Y-.854 E.02674 G2 X-82.072 Y-.162 I1.521 J-1.184 E.07303 G1 X-81.417 Y-.632 E.02674 G3 X-79.451 Y-1.324 I1.521 J1.184 E.07303 G1 X-78.796 Y-.854 E.02674 G2 X-76.831 Y-.162 I1.521 J-1.184 E.07303 G1 X-76.176 Y-.632 E.02674 G3 X-74.21 Y-1.324 I1.521 J1.184 E.07303 G1 X-73.555 Y-.854 E.02674 G2 X-71.59 Y-.162 I1.521 J-1.184 E.07303 G1 X-70.934 Y-.632 E.02674 G3 X-68.969 Y-1.324 I1.521 J1.184 E.07303 G1 X-68.314 Y-.854 E.02674 G2 X-66.348 Y-.162 I1.521 J-1.184 E.07303 G1 X-65.693 Y-.632 E.02674 G3 X-63.728 Y-1.324 I1.521 J1.184 E.07303 G1 X-63.072 Y-.854 E.02674 G2 X-61.107 Y-.162 I1.521 J-1.184 E.07303 G1 X-60.452 Y-.632 E.02674 G3 X-58.486 Y-1.324 I1.521 J1.184 E.07303 G1 X-57.831 Y-.854 E.02674 G2 X-55.866 Y-.162 I1.521 J-1.184 E.07303 G1 X-55.21 Y-.632 E.02674 G3 X-53.245 Y-1.324 I1.521 J1.184 E.07303 G1 X-52.59 Y-.854 E.02674 G2 X-50.624 Y-.162 I1.521 J-1.184 E.07303 G1 X-49.969 Y-.632 E.02674 G3 X-48.004 Y-1.324 I1.521 J1.184 E.07303 G1 X-47.348 Y-.854 E.02674 G2 X-45.383 Y-.162 I1.521 J-1.184 E.07303 G1 X-44.728 Y-.632 E.02674 G3 X-42.762 Y-1.324 I1.521 J1.184 E.07303 G1 X-42.107 Y-.854 E.02674 G2 X-40.142 Y-.162 I1.521 J-1.184 E.07303 G1 X-39.487 Y-.632 E.02674 G3 X-37.521 Y-1.324 I1.521 J1.184 E.07303 G1 X-36.866 Y-.854 E.02674 G2 X-34.9 Y-.162 I1.521 J-1.184 E.07303 G1 X-34.245 Y-.632 E.02674 G3 X-32.28 Y-1.324 I1.521 J1.184 E.07303 G1 X-31.625 Y-.854 E.02674 G2 X-29.659 Y-.162 I1.521 J-1.184 E.07303 G1 X-29.004 Y-.632 E.02674 G3 X-27.038 Y-1.324 I1.521 J1.184 E.07303 G1 X-26.383 Y-.854 E.02674 G2 X-24.418 Y-.162 I1.521 J-1.184 E.07303 G1 X-23.763 Y-.632 E.02674 G3 X-21.797 Y-1.324 I1.521 J1.184 E.07303 G1 X-21.142 Y-.854 E.02674 G2 X-19.176 Y-.162 I1.521 J-1.184 E.07303 G1 X-18.521 Y-.632 E.02674 G3 X-16.556 Y-1.324 I1.521 J1.184 E.07303 G3 X-15.245 Y-.29 I-5.127 J7.846 E.05544 G1 X-14.59 Y-.084 E.02278 G1 X-14.213 Y-.129 E.0126 G1 X-14.213 Y2.418 E.08449 G1 X-14.59 Y2.536 E.01312 G1 X-15.245 Y2.458 E.02189 G1 X-15.901 Y1.989 E.02674 G2 X-17.866 Y1.297 I-1.521 J1.184 E.07303 G1 X-18.521 Y1.766 E.02674 G3 X-20.487 Y2.458 I-1.521 J-1.184 E.07303 G1 X-21.142 Y1.989 E.02674 G2 X-23.107 Y1.297 I-1.521 J1.184 E.07303 G1 X-23.763 Y1.766 E.02674 G3 X-25.728 Y2.458 I-1.521 J-1.184 E.07303 G1 X-26.383 Y1.989 E.02674 G2 X-28.349 Y1.297 I-1.521 J1.184 E.07303 G1 X-29.004 Y1.766 E.02674 G3 X-30.969 Y2.458 I-1.521 J-1.184 E.07303 G1 X-31.625 Y1.989 E.02674 G2 X-33.59 Y1.297 I-1.521 J1.184 E.07303 G1 X-34.245 Y1.766 E.02674 G3 X-36.211 Y2.458 I-1.521 J-1.184 E.07303 G1 X-36.866 Y1.989 E.02674 G2 X-38.831 Y1.297 I-1.521 J1.184 E.07303 G1 X-39.487 Y1.766 E.02674 G3 X-41.452 Y2.458 I-1.521 J-1.184 E.07303 G1 X-42.107 Y1.989 E.02674 G2 X-44.073 Y1.297 I-1.521 J1.184 E.07303 G1 X-44.728 Y1.766 E.02674 G3 X-46.693 Y2.458 I-1.521 J-1.184 E.07303 G1 X-47.348 Y1.989 E.02674 G2 X-49.314 Y1.297 I-1.521 J1.184 E.07303 G1 X-49.969 Y1.766 E.02674 G3 X-51.935 Y2.458 I-1.521 J-1.184 E.07303 G1 X-52.59 Y1.989 E.02674 G2 X-54.555 Y1.297 I-1.521 J1.184 E.07303 G1 X-55.21 Y1.766 E.02674 G3 X-57.176 Y2.458 I-1.521 J-1.184 E.07303 G1 X-57.831 Y1.989 E.02674 G2 X-59.797 Y1.297 I-1.521 J1.184 E.07303 G1 X-60.452 Y1.766 E.02674 G3 X-62.417 Y2.458 I-1.521 J-1.184 E.07303 G1 X-63.072 Y1.989 E.02674 G2 X-65.038 Y1.297 I-1.521 J1.184 E.07303 G1 X-65.693 Y1.766 E.02674 G3 X-67.659 Y2.458 I-1.521 J-1.184 E.07303 G1 X-68.314 Y1.989 E.02674 G2 X-70.279 Y1.297 I-1.521 J1.184 E.07303 G1 X-70.934 Y1.766 E.02674 G3 X-72.9 Y2.458 I-1.521 J-1.184 E.07303 G1 X-73.555 Y1.989 E.02674 G2 X-75.52 Y1.297 I-1.521 J1.184 E.07303 G1 X-76.176 Y1.766 E.02674 G3 X-78.141 Y2.458 I-1.521 J-1.184 E.07303 G1 X-78.796 Y1.989 E.02674 G2 X-80.762 Y1.297 I-1.521 J1.184 E.07303 G1 X-81.417 Y1.766 E.02674 G3 X-83.382 Y2.458 I-1.521 J-1.184 E.07303 G1 X-84.038 Y1.989 E.02674 G2 X-86.003 Y1.297 I-1.521 J1.184 E.07303 G1 X-86.658 Y1.766 E.02674 G3 X-88.624 Y2.458 I-1.521 J-1.184 E.07303 G3 X-89.934 Y1.425 I5.127 J-7.846 E.05544 G1 X-90.687 Y1.23 E.02579 G1 X-90.687 Y3.87 E.08756 G1 X-89.934 Y3.917 E.02502 G1 X-89.279 Y4.387 E.02674 G2 X-87.313 Y5.079 I1.521 J-1.184 E.07303 G1 X-86.658 Y4.61 E.02674 G3 X-84.693 Y3.917 I1.521 J1.184 E.07303 G1 X-84.038 Y4.387 E.02674 G2 X-82.072 Y5.079 I1.521 J-1.184 E.07303 G1 X-81.417 Y4.61 E.02674 G3 X-79.451 Y3.917 I1.521 J1.184 E.07303 G1 X-78.796 Y4.387 E.02674 G2 X-76.831 Y5.079 I1.521 J-1.184 E.07303 G1 X-76.176 Y4.61 E.02674 G3 X-74.21 Y3.917 I1.521 J1.184 E.07303 G1 X-73.555 Y4.387 E.02674 G2 X-71.59 Y5.079 I1.521 J-1.184 E.07303 G1 X-70.934 Y4.61 E.02674 G3 X-68.969 Y3.917 I1.521 J1.184 E.07303 G1 X-68.314 Y4.387 E.02674 G2 X-66.348 Y5.079 I1.521 J-1.184 E.07303 G1 X-65.693 Y4.61 E.02674 G3 X-63.728 Y3.917 I1.521 J1.184 E.07303 G1 X-63.072 Y4.387 E.02674 G2 X-61.107 Y5.079 I1.521 J-1.184 E.07303 G1 X-60.452 Y4.61 E.02674 G3 X-58.486 Y3.917 I1.521 J1.184 E.07303 G1 X-57.831 Y4.387 E.02674 G2 X-55.866 Y5.079 I1.521 J-1.184 E.07303 G1 X-55.21 Y4.61 E.02674 G3 X-53.245 Y3.917 I1.521 J1.184 E.07303 G1 X-52.59 Y4.387 E.02674 G2 X-50.624 Y5.079 I1.521 J-1.184 E.07303 G1 X-49.969 Y4.61 E.02674 G3 X-48.004 Y3.917 I1.521 J1.184 E.07303 G1 X-47.348 Y4.387 E.02674 G2 X-45.383 Y5.079 I1.521 J-1.184 E.07303 G1 X-44.728 Y4.61 E.02674 G3 X-42.762 Y3.917 I1.521 J1.184 E.07303 G1 X-42.107 Y4.387 E.02674 G2 X-40.142 Y5.079 I1.521 J-1.184 E.07303 G1 X-39.487 Y4.61 E.02674 G3 X-37.521 Y3.917 I1.521 J1.184 E.07303 G1 X-36.866 Y4.387 E.02674 G2 X-34.9 Y5.079 I1.521 J-1.184 E.07303 G1 X-34.245 Y4.61 E.02674 G3 X-32.28 Y3.917 I1.521 J1.184 E.07303 G1 X-31.625 Y4.387 E.02674 G2 X-29.659 Y5.079 I1.521 J-1.184 E.07303 G1 X-29.004 Y4.61 E.02674 G3 X-27.038 Y3.917 I1.521 J1.184 E.07303 G1 X-26.383 Y4.387 E.02674 G2 X-24.418 Y5.079 I1.521 J-1.184 E.07303 G1 X-23.763 Y4.61 E.02674 G3 X-21.797 Y3.917 I1.521 J1.184 E.07303 G1 X-21.142 Y4.387 E.02674 G2 X-19.176 Y5.079 I1.521 J-1.184 E.07303 G1 X-18.521 Y4.61 E.02674 G3 X-16.556 Y3.917 I1.521 J1.184 E.07303 G3 X-15.245 Y4.951 I-5.127 J7.846 E.05544 G1 X-14.59 Y5.157 E.02278 G1 X-14.213 Y5.112 E.0126 G1 X-14.213 Y7.659 E.08449 G1 X-14.59 Y7.778 E.01312 G1 X-15.245 Y7.7 E.02189 G1 X-15.901 Y7.23 E.02674 G2 X-17.866 Y6.538 I-1.521 J1.184 E.07303 G1 X-18.521 Y7.008 E.02674 G3 X-20.487 Y7.7 I-1.521 J-1.184 E.07303 G1 X-21.142 Y7.23 E.02674 G2 X-23.107 Y6.538 I-1.521 J1.184 E.07303 G1 X-23.763 Y7.008 E.02674 G3 X-25.728 Y7.7 I-1.521 J-1.184 E.07303 G1 X-26.383 Y7.23 E.02674 G2 X-28.349 Y6.538 I-1.521 J1.184 E.07303 G1 X-29.004 Y7.008 E.02674 G3 X-30.969 Y7.7 I-1.521 J-1.184 E.07303 G1 X-31.625 Y7.23 E.02674 G2 X-33.59 Y6.538 I-1.521 J1.184 E.07303 G2 X-34.9 Y7.572 I5.127 J7.846 E.05544 G3 X-36.211 Y7.7 I-.877 J-2.206 E.04425 G1 X-36.866 Y7.23 E.02674 G2 X-38.831 Y6.538 I-1.521 J1.184 E.07303 G2 X-40.142 Y7.572 I5.127 J7.846 E.05544 G3 X-41.452 Y7.7 I-.877 J-2.206 E.04425 G1 X-42.107 Y7.23 E.02674 G2 X-44.073 Y6.538 I-1.521 J1.184 E.07303 G2 X-45.383 Y7.572 I5.127 J7.846 E.05544 G3 X-46.693 Y7.7 I-.877 J-2.206 E.04425 G1 X-47.348 Y7.23 E.02674 G2 X-49.314 Y6.538 I-1.521 J1.184 E.07303 G2 X-50.624 Y7.572 I5.127 J7.846 E.05544 G3 X-51.935 Y7.7 I-.877 J-2.206 E.04425 G1 X-52.59 Y7.23 E.02674 G2 X-54.555 Y6.538 I-1.521 J1.184 E.07303 G2 X-55.866 Y7.572 I5.127 J7.846 E.05544 G3 X-57.176 Y7.7 I-.877 J-2.206 E.04425 G1 X-57.831 Y7.23 E.02674 G2 X-59.797 Y6.538 I-1.521 J1.184 E.07303 G2 X-61.107 Y7.572 I5.127 J7.846 E.05544 G3 X-62.417 Y7.7 I-.877 J-2.206 E.04425 G1 X-63.072 Y7.23 E.02674 G2 X-65.038 Y6.538 I-1.521 J1.184 E.07303 G2 X-66.348 Y7.572 I5.127 J7.846 E.05544 G3 X-67.659 Y7.7 I-.877 J-2.206 E.04425 G1 X-68.314 Y7.23 E.02674 G2 X-70.279 Y6.538 I-1.521 J1.184 E.07303 G2 X-71.59 Y7.572 I5.127 J7.846 E.05544 G3 X-72.9 Y7.7 I-.877 J-2.206 E.04425 G1 X-73.555 Y7.23 E.02674 G2 X-75.52 Y6.538 I-1.521 J1.184 E.07303 G1 X-76.176 Y7.008 E.02674 G3 X-78.141 Y7.7 I-1.521 J-1.184 E.07303 G1 X-78.796 Y7.23 E.02674 G2 X-80.762 Y6.538 I-1.521 J1.184 E.07303 G1 X-81.417 Y7.008 E.02674 G3 X-83.382 Y7.7 I-1.521 J-1.184 E.07303 G1 X-84.038 Y7.23 E.02674 G2 X-86.003 Y6.538 I-1.521 J1.184 E.07303 G1 X-86.658 Y7.008 E.02674 G3 X-88.624 Y7.7 I-1.521 J-1.184 E.07303 G3 X-89.934 Y6.666 I5.127 J-7.846 E.05544 G1 X-90.687 Y6.472 E.02579 G1 X-90.687 Y8.1 E.05401 G1 X-84.687 Y24.023 F30000 G1 F16200 G1 X-84.687 Y22.395 E.05401 G2 X-83.382 Y23.424 I6.406 J-6.781 E.05518 G2 X-81.417 Y22.732 I.444 J-1.876 E.07303 G1 X-80.762 Y22.262 E.02674 G3 X-78.796 Y22.954 I.444 J1.876 E.07303 G1 X-78.141 Y23.424 E.02674 G2 X-76.176 Y22.732 I.444 J-1.876 E.07303 G1 X-75.52 Y22.262 E.02674 G3 X-73.713 Y22.818 I.447 J1.763 E.06596 G1 X-73.713 Y25.239 E.08031 G1 X-74.21 Y24.883 E.02029 G2 X-76.176 Y25.575 I-.444 J1.876 E.07303 G1 X-76.831 Y26.044 E.02674 G3 X-78.796 Y25.352 I-.444 J-1.876 E.07303 G1 X-79.451 Y24.883 E.02674 G2 X-81.417 Y25.575 I-.444 J1.876 E.07303 G1 X-82.072 Y26.044 E.02674 G3 X-84.038 Y25.352 I-.444 J-1.876 E.07303 G1 X-84.687 Y24.887 E.0265 G1 X-84.687 Y26.263 E.04565 G1 X-84.939 Y26.263 E.00836 G1 X-90.687 Y33.69 F30000 G1 F16200 G1 X-90.687 Y35.318 E.05401 G1 X-89.934 Y35.365 E.02502 G1 X-89.279 Y35.835 E.02674 G2 X-87.313 Y36.527 I1.521 J-1.184 E.07303 G1 X-86.658 Y36.057 E.02674 G3 X-84.693 Y35.365 I1.521 J1.184 E.07303 G1 X-84.038 Y35.835 E.02674 G2 X-82.072 Y36.527 I1.521 J-1.184 E.07303 G1 X-81.417 Y36.057 E.02674 G3 X-79.451 Y35.365 I1.521 J1.184 E.07303 G1 X-78.796 Y35.835 E.02674 G2 X-76.831 Y36.527 I1.521 J-1.184 E.07303 G1 X-76.176 Y36.057 E.02674 G3 X-74.21 Y35.365 I1.521 J1.184 E.07303 G1 X-73.555 Y35.835 E.02674 G2 X-71.59 Y36.527 I1.521 J-1.184 E.07303 G1 X-70.934 Y36.057 E.02674 G3 X-68.969 Y35.365 I1.521 J1.184 E.07303 G1 X-68.314 Y35.835 E.02674 G2 X-66.348 Y36.527 I1.521 J-1.184 E.07303 G1 X-65.693 Y36.057 E.02674 G3 X-63.728 Y35.365 I1.521 J1.184 E.07303 G1 X-63.072 Y35.835 E.02674 G2 X-61.107 Y36.527 I1.521 J-1.184 E.07303 G1 X-60.452 Y36.057 E.02674 G3 X-58.486 Y35.365 I1.521 J1.184 E.07303 G1 X-57.831 Y35.835 E.02674 G2 X-55.866 Y36.527 I1.521 J-1.184 E.07303 G1 X-55.21 Y36.057 E.02674 G3 X-53.245 Y35.365 I1.521 J1.184 E.07303 G1 X-52.59 Y35.835 E.02674 G2 X-50.624 Y36.527 I1.521 J-1.184 E.07303 G1 X-49.969 Y36.057 E.02674 G3 X-48.004 Y35.365 I1.521 J1.184 E.07303 G1 X-47.348 Y35.835 E.02674 G2 X-45.383 Y36.527 I1.521 J-1.184 E.07303 G1 X-44.728 Y36.057 E.02674 G3 X-42.762 Y35.365 I1.521 J1.184 E.07303 G1 X-42.107 Y35.835 E.02674 G2 X-40.142 Y36.527 I1.521 J-1.184 E.07303 G1 X-39.487 Y36.057 E.02674 G3 X-37.521 Y35.365 I1.521 J1.184 E.07303 G1 X-36.866 Y35.835 E.02674 G2 X-34.9 Y36.527 I1.521 J-1.184 E.07303 G1 X-34.245 Y36.057 E.02674 G3 X-32.28 Y35.365 I1.521 J1.184 E.07303 G1 X-31.625 Y35.835 E.02674 G2 X-29.659 Y36.527 I1.521 J-1.184 E.07303 G1 X-29.004 Y36.057 E.02674 G3 X-27.038 Y35.365 I1.521 J1.184 E.07303 G1 X-26.383 Y35.835 E.02674 G2 X-24.418 Y36.527 I1.521 J-1.184 E.07303 G1 X-23.763 Y36.057 E.02674 G3 X-21.797 Y35.365 I1.521 J1.184 E.07303 G1 X-21.142 Y35.835 E.02674 G2 X-19.176 Y36.527 I1.521 J-1.184 E.07303 G1 X-18.521 Y36.057 E.02674 G3 X-16.556 Y35.365 I1.521 J1.184 E.07303 G3 X-15.245 Y36.399 I-5.127 J7.845 E.05544 G1 X-14.59 Y36.605 E.02278 G1 X-14.213 Y36.56 E.0126 G1 X-14.213 Y39.107 E.08449 G1 X-14.59 Y39.226 E.01312 G1 X-15.245 Y39.148 E.02189 G1 X-15.901 Y38.678 E.02674 G2 X-17.866 Y37.986 I-1.521 J1.184 E.07303 G1 X-18.521 Y38.455 E.02674 G3 X-20.487 Y39.148 I-1.521 J-1.184 E.07303 G1 X-21.142 Y38.678 E.02674 G2 X-23.107 Y37.986 I-1.521 J1.184 E.07303 G1 X-23.763 Y38.455 E.02674 G3 X-25.728 Y39.148 I-1.521 J-1.184 E.07303 G1 X-26.383 Y38.678 E.02674 G2 X-28.349 Y37.986 I-1.521 J1.184 E.07303 G1 X-29.004 Y38.455 E.02674 G3 X-30.969 Y39.148 I-1.521 J-1.184 E.07303 G1 X-31.625 Y38.678 E.02674 G2 X-33.59 Y37.986 I-1.521 J1.184 E.07303 G1 X-34.245 Y38.455 E.02674 G3 X-36.211 Y39.148 I-1.521 J-1.184 E.07303 G1 X-36.866 Y38.678 E.02674 G2 X-38.831 Y37.986 I-1.521 J1.184 E.07303 G1 X-39.487 Y38.455 E.02674 G3 X-41.452 Y39.148 I-1.521 J-1.184 E.07303 G1 X-42.107 Y38.678 E.02674 G2 X-44.073 Y37.986 I-1.521 J1.184 E.07303 G1 X-44.728 Y38.455 E.02674 G3 X-46.693 Y39.148 I-1.521 J-1.184 E.07303 G1 X-47.348 Y38.678 E.02674 G2 X-49.314 Y37.986 I-1.521 J1.184 E.07303 G1 X-49.969 Y38.455 E.02674 G3 X-51.935 Y39.148 I-1.521 J-1.184 E.07303 G1 X-52.59 Y38.678 E.02674 G2 X-54.555 Y37.986 I-1.521 J1.184 E.07303 G1 X-55.21 Y38.455 E.02674 G3 X-57.176 Y39.148 I-1.521 J-1.184 E.07303 G1 X-57.831 Y38.678 E.02674 G2 X-59.797 Y37.986 I-1.521 J1.184 E.07303 G1 X-60.452 Y38.455 E.02674 G3 X-62.417 Y39.148 I-1.521 J-1.184 E.07303 G1 X-63.072 Y38.678 E.02674 G2 X-65.038 Y37.986 I-1.521 J1.184 E.07303 G1 X-65.693 Y38.455 E.02674 G3 X-67.659 Y39.148 I-1.521 J-1.184 E.07303 G1 X-68.314 Y38.678 E.02674 G2 X-70.279 Y37.986 I-1.521 J1.184 E.07303 G1 X-70.934 Y38.455 E.02674 G3 X-72.9 Y39.148 I-1.521 J-1.184 E.07303 G1 X-73.555 Y38.678 E.02674 G2 X-75.52 Y37.986 I-1.521 J1.184 E.07303 G1 X-76.176 Y38.455 E.02674 G3 X-78.141 Y39.148 I-1.521 J-1.184 E.07303 G1 X-78.796 Y38.678 E.02674 G2 X-80.762 Y37.986 I-1.521 J1.184 E.07303 G1 X-81.417 Y38.455 E.02674 G3 X-83.382 Y39.148 I-1.521 J-1.184 E.07303 G1 X-84.038 Y38.678 E.02674 G2 X-86.003 Y37.986 I-1.521 J1.184 E.07303 G1 X-86.658 Y38.455 E.02674 G3 X-88.624 Y39.148 I-1.521 J-1.184 E.07303 G3 X-89.934 Y38.114 I5.127 J-7.846 E.05544 G1 X-90.687 Y37.92 E.02579 G1 X-90.687 Y40.559 E.08756 G1 X-89.934 Y40.607 E.02502 G1 X-89.279 Y41.076 E.02674 G2 X-87.313 Y41.768 I1.521 J-1.184 E.07303 G1 X-86.658 Y41.299 E.02674 G3 X-84.693 Y40.607 I1.521 J1.184 E.07303 G1 X-84.038 Y41.076 E.02674 G2 X-82.072 Y41.768 I1.521 J-1.184 E.07303 G1 X-81.417 Y41.299 E.02674 G3 X-79.451 Y40.607 I1.521 J1.184 E.07303 G1 X-78.796 Y41.076 E.02674 G2 X-76.831 Y41.768 I1.521 J-1.184 E.07303 G1 X-76.176 Y41.299 E.02674 G3 X-74.21 Y40.607 I1.521 J1.184 E.07303 G3 X-73.439 Y41.176 I-2.798 J4.596 E.03183 G2 X-74.806 Y43.168 I.992 J2.145 E.08411 G1 X-75.52 Y43.227 E.02379 G1 X-76.176 Y43.697 E.02674 G3 X-78.141 Y44.389 I-1.521 J-1.184 E.07303 G1 X-78.796 Y43.919 E.02674 G2 X-80.762 Y43.227 I-1.521 J1.184 E.07303 G1 X-81.417 Y43.697 E.02674 G3 X-83.382 Y44.389 I-1.521 J-1.184 E.07303 G1 X-84.038 Y43.919 E.02674 G2 X-86.003 Y43.227 I-1.521 J1.184 E.07303 G1 X-86.658 Y43.697 E.02674 G3 X-88.624 Y44.389 I-1.521 J-1.184 E.07303 G3 X-89.934 Y43.355 I5.127 J-7.846 E.05544 G1 X-90.687 Y43.161 E.02579 G1 X-90.687 Y45.801 E.08756 G1 X-89.934 Y45.848 E.02502 G1 X-89.433 Y46.207 E.02045 G3 X-88.37 Y45.536 I2.623 J2.976 E.04187 G1 X-88.344 Y45.526 E.00094 G3 X-85.556 Y45.526 I1.394 J3.451 E.09477 G2 X-84.693 Y45.848 I1.196 J-1.894 E.03079 G1 X-84.038 Y46.317 E.02674 G2 X-82.072 Y47.01 I1.521 J-1.184 E.07303 G1 X-81.417 Y46.54 E.02674 G3 X-79.451 Y45.848 I1.521 J1.184 E.07303 G1 X-78.796 Y46.317 E.02674 G2 X-76.831 Y47.01 I1.521 J-1.184 E.07303 G1 X-76.176 Y46.54 E.02674 G3 X-74.21 Y45.848 I1.521 J1.184 E.07303 G1 X-73.555 Y46.317 E.02674 G2 X-71.59 Y47.01 I1.521 J-1.184 E.07303 G1 X-70.934 Y46.54 E.02674 G3 X-68.969 Y45.848 I1.521 J1.184 E.07303 G1 X-68.314 Y46.317 E.02674 G2 X-66.348 Y47.01 I1.521 J-1.184 E.07303 G1 X-65.693 Y46.54 E.02674 G3 X-63.728 Y45.848 I1.521 J1.184 E.07303 G1 X-63.072 Y46.317 E.02674 G2 X-61.107 Y47.01 I1.521 J-1.184 E.07303 G1 X-60.452 Y46.54 E.02674 G3 X-58.486 Y45.848 I1.521 J1.184 E.07303 G1 X-57.831 Y46.317 E.02674 G2 X-55.866 Y47.01 I1.521 J-1.184 E.07303 G1 X-55.21 Y46.54 E.02674 G3 X-53.245 Y45.848 I1.521 J1.184 E.07303 G1 X-52.59 Y46.317 E.02674 G2 X-50.624 Y47.01 I1.521 J-1.184 E.07303 G1 X-49.969 Y46.54 E.02674 G3 X-48.004 Y45.848 I1.521 J1.184 E.07303 G1 X-47.348 Y46.317 E.02674 G2 X-45.383 Y47.01 I1.521 J-1.184 E.07303 G1 X-44.728 Y46.54 E.02674 G3 X-42.762 Y45.848 I1.521 J1.184 E.07303 G1 X-42.107 Y46.317 E.02674 G2 X-40.142 Y47.01 I1.521 J-1.184 E.07303 G1 X-39.487 Y46.54 E.02674 G3 X-37.521 Y45.848 I1.521 J1.184 E.07303 G1 X-36.866 Y46.317 E.02674 G2 X-34.9 Y47.01 I1.521 J-1.184 E.07303 G1 X-34.245 Y46.54 E.02674 G3 X-32.28 Y45.848 I1.521 J1.184 E.07303 G1 X-31.625 Y46.317 E.02674 G2 X-29.659 Y47.01 I1.521 J-1.184 E.07303 G1 X-29.004 Y46.54 E.02674 G3 X-27.038 Y45.848 I1.521 J1.184 E.07303 G1 X-26.383 Y46.317 E.02674 G2 X-24.418 Y47.01 I1.521 J-1.184 E.07303 G1 X-23.763 Y46.54 E.02674 G3 X-21.797 Y45.848 I1.521 J1.184 E.07303 G3 X-20.815 Y46.599 I-3.71 J5.868 E.04107 G2 X-21.676 Y48.701 I2.881 J2.406 E.07655 G2 X-23.107 Y48.469 I-.985 J1.542 E.04948 G1 X-23.763 Y48.938 E.02674 G3 X-25.728 Y49.63 I-1.521 J-1.184 E.07303 G1 X-26.383 Y49.161 E.02674 G2 X-28.349 Y48.469 I-1.521 J1.184 E.07303 G1 X-29.004 Y48.938 E.02674 G3 X-30.969 Y49.63 I-1.521 J-1.184 E.07303 G1 X-31.625 Y49.161 E.02674 G2 X-33.59 Y48.469 I-1.521 J1.184 E.07303 G1 X-34.245 Y48.938 E.02674 G3 X-36.211 Y49.63 I-1.521 J-1.184 E.07303 G1 X-36.866 Y49.161 E.02674 G2 X-38.831 Y48.469 I-1.521 J1.184 E.07303 G1 X-39.487 Y48.938 E.02674 G3 X-41.452 Y49.63 I-1.521 J-1.184 E.07303 G1 X-42.107 Y49.161 E.02674 G2 X-44.073 Y48.469 I-1.521 J1.184 E.07303 G1 X-44.728 Y48.938 E.02674 G3 X-46.693 Y49.63 I-1.521 J-1.184 E.07303 G1 X-47.348 Y49.161 E.02674 G2 X-49.314 Y48.469 I-1.521 J1.184 E.07303 G1 X-49.969 Y48.938 E.02674 G3 X-51.935 Y49.63 I-1.521 J-1.184 E.07303 G1 X-52.59 Y49.161 E.02674 G2 X-54.555 Y48.469 I-1.521 J1.184 E.07303 G1 X-55.21 Y48.938 E.02674 G3 X-57.176 Y49.63 I-1.521 J-1.184 E.07303 G1 X-57.831 Y49.161 E.02674 G2 X-59.797 Y48.469 I-1.521 J1.184 E.07303 G1 X-60.452 Y48.938 E.02674 G3 X-62.417 Y49.63 I-1.521 J-1.184 E.07303 G1 X-63.072 Y49.161 E.02674 G2 X-65.038 Y48.469 I-1.521 J1.184 E.07303 G1 X-65.693 Y48.938 E.02674 G3 X-67.659 Y49.63 I-1.521 J-1.184 E.07303 G1 X-68.314 Y49.161 E.02674 G2 X-70.279 Y48.469 I-1.521 J1.184 E.07303 G1 X-70.934 Y48.938 E.02674 G3 X-72.9 Y49.63 I-1.521 J-1.184 E.07303 G1 X-73.555 Y49.161 E.02674 G2 X-75.52 Y48.469 I-1.521 J1.184 E.07303 G1 X-76.176 Y48.938 E.02674 G3 X-78.141 Y49.63 I-1.521 J-1.184 E.07303 G1 X-78.796 Y49.161 E.02674 G2 X-80.762 Y48.469 I-1.521 J1.184 E.07303 G2 X-82.072 Y49.502 I5.127 J7.846 E.05544 G1 X-82.727 Y49.708 E.02278 G1 X-83.268 Y49.644 E.01805 G2 X-83.333 Y48.03 I-3.88 J-.65 E.05396 G1 X-84.875 Y46.414 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.487665 G1 F15000 G1 X-85.529 Y46.01 E.02787 G1 X-86.072 Y45.806 E.02102 G1 X-86.588 Y45.704 E.01906 G1 X-87.311 Y45.704 E.02619 G2 X-88.834 Y46.278 I.503 J3.639 E.05947 G1 X-89.277 Y46.643 E.02082 G2 X-89.875 Y47.427 I2.399 J2.448 E.03586 ;WIDTH:0.480888 G1 X-89.965 Y47.448 E.0033 ;WIDTH:0.42037 G3 X-90.229 Y47.464 I-.165 J-.511 E.00822 G1 X-90.506 Y47.367 E.00902 G1 X-90.506 Y49.556 E.06732 G1 X-89.733 Y49.556 E.02377 G3 X-89.774 Y48.653 I3.983 J-.634 E.02786 G1 X-89.616 Y48.038 E.01952 ;WIDTH:0.440296 G1 X-89.558 Y47.864 E.00596 ;WIDTH:0.482843 G1 X-89.501 Y47.689 E.00659 G1 X-89.242 Y47.259 E.01799 G1 X-88.722 Y46.737 E.0264 G1 X-88.077 Y46.354 E.02689 G1 X-87.354 Y46.152 E.02692 G1 X-86.603 Y46.144 E.02692 G1 X-85.876 Y46.334 E.02692 G1 X-85.222 Y46.701 E.02689 G1 X-84.685 Y47.226 E.02691 G1 X-84.307 Y47.875 E.02692 G1 X-84.102 Y48.596 E.02688 G1 X-84.098 Y49.311 E.02565 G1 X-84.132 Y49.528 E.00786 G1 X-83.688 Y49.528 E.01592 G2 X-83.789 Y48.023 I-3.323 J-.534 E.05455 G1 X-84.072 Y47.362 E.02574 G1 X-84.364 Y46.925 E.01885 G1 X-84.847 Y46.442 E.02449 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.364 Y46.925 G1 X-84.072 Y47.362 G1 X-83.789 Y48.023 G1 X-83.772 Y48.094 ;WIPE_END G1 X-90.14 Y49.19 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397568 G1 F15000 G1 X-90.14 Y48.653 E.01552 ;WIDTH:0.419253 G1 X-90.119 Y48.48 E.00534 ;WIDTH:0.462622 G1 X-90.099 Y48.307 E.00596 ;WIDTH:0.505991 G1 X-90.078 Y48.134 E.00657 ;WIDTH:0.527675 G1 X-90.058 Y47.961 E.00688 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.713 Y11.143 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-73.713 Y9.515 E.05401 G1 X-74.21 Y9.159 E.02029 G2 X-76.176 Y9.851 I-.444 J1.876 E.07303 G1 X-76.831 Y10.32 E.02674 G3 X-78.796 Y9.628 I-.444 J-1.876 E.07303 G1 X-79.451 Y9.159 E.02674 G2 X-81.417 Y9.851 I-.444 J1.876 E.07303 G1 X-82.072 Y10.32 E.02674 G3 X-84.038 Y9.628 I-.444 J-1.876 E.07303 G1 X-84.693 Y9.159 E.02674 G2 X-86.658 Y9.851 I-.444 J1.876 E.07303 G1 X-87.313 Y10.32 E.02674 G3 X-89.279 Y9.628 I-.444 J-1.876 E.07303 G1 X-89.934 Y9.159 E.02674 G1 X-90.687 Y9.111 E.02502 G1 X-90.687 Y11.713 E.0863 G1 X-89.934 Y11.907 E.02579 G2 X-88.624 Y12.941 I6.437 J-6.812 E.05544 G2 X-86.658 Y12.249 I.444 J-1.876 E.07303 G1 X-86.003 Y11.779 E.02674 G3 X-84.038 Y12.472 I.444 J1.876 E.07303 G1 X-83.382 Y12.941 E.02674 G2 X-81.417 Y12.249 I.444 J-1.876 E.07303 G1 X-80.762 Y11.779 E.02674 G3 X-78.796 Y12.472 I.444 J1.876 E.07303 G1 X-78.141 Y12.941 E.02674 G2 X-76.176 Y12.249 I.444 J-1.876 E.07303 G1 X-75.52 Y11.779 E.02674 G3 X-73.713 Y12.335 I.447 J1.763 E.06596 G1 X-73.713 Y14.756 E.08031 G1 X-74.21 Y14.4 E.02029 G2 X-76.176 Y15.092 I-.444 J1.876 E.07303 G1 X-76.831 Y15.562 E.02674 G3 X-78.796 Y14.87 I-.444 J-1.876 E.07303 G1 X-79.451 Y14.4 E.02674 G2 X-81.417 Y15.092 I-.444 J1.876 E.07303 G1 X-82.072 Y15.562 E.02674 G3 X-84.038 Y14.87 I-.444 J-1.876 E.07303 G1 X-84.693 Y14.4 E.02674 G2 X-86.658 Y15.092 I-.444 J1.876 E.07303 G1 X-87.313 Y15.562 E.02674 G3 X-89.279 Y14.87 I-.444 J-1.876 E.07303 G1 X-89.934 Y14.4 E.02674 G1 X-90.687 Y14.353 E.02502 G1 X-90.687 Y16.954 E.0863 G1 X-89.934 Y17.149 E.02579 G2 X-88.624 Y18.182 I6.437 J-6.812 E.05544 G2 X-86.658 Y17.49 I.444 J-1.876 E.07303 G1 X-86.003 Y17.021 E.02674 G3 X-84.038 Y17.713 I.444 J1.876 E.07303 G1 X-83.382 Y18.182 E.02674 G2 X-81.417 Y17.49 I.444 J-1.876 E.07303 G1 X-80.762 Y17.021 E.02674 G3 X-78.796 Y17.713 I.444 J1.876 E.07303 G1 X-78.141 Y18.182 E.02674 G2 X-76.176 Y17.49 I.444 J-1.876 E.07303 G1 X-75.52 Y17.021 E.02674 G3 X-73.713 Y17.577 I.447 J1.763 E.06596 G1 X-73.713 Y19.998 E.08031 G1 X-74.21 Y19.641 E.02029 G2 X-76.176 Y20.333 I-.444 J1.876 E.07303 G1 X-76.831 Y20.803 E.02674 G3 X-78.796 Y20.111 I-.444 J-1.876 E.07303 G1 X-79.451 Y19.641 E.02674 G2 X-81.417 Y20.333 I-.444 J1.876 E.07303 G1 X-82.072 Y20.803 E.02674 G3 X-84.038 Y20.111 I-.444 J-1.876 E.07303 G1 X-84.693 Y19.641 E.02674 G2 X-85.9 Y19.737 I-.498 J1.389 E.0414 G1 X-89.713 Y19.737 E.12648 G1 X-89.713 Y19.8 E.00208 G1 X-89.934 Y19.641 E.00902 G1 X-90.687 Y19.594 E.02502 G1 X-90.687 Y22.196 E.0863 G1 X-89.934 Y22.39 E.02579 G1 X-89.713 Y22.58 E.00967 G1 X-89.713 Y25.041 E.08163 G1 X-89.934 Y24.883 E.00902 G1 X-90.687 Y24.835 E.02502 G1 X-90.687 Y27.437 E.0863 G1 X-89.934 Y27.631 E.02579 G2 X-88.624 Y28.665 I6.437 J-6.812 E.05544 G2 X-86.658 Y27.973 I.444 J-1.876 E.07303 G1 X-86.003 Y27.503 E.02674 G3 X-84.038 Y28.195 I.444 J1.876 E.07303 G1 X-83.382 Y28.665 E.02674 G2 X-81.417 Y27.973 I.444 J-1.876 E.07303 G1 X-80.762 Y27.503 E.02674 G3 X-78.796 Y28.195 I.444 J1.876 E.07303 G1 X-78.141 Y28.665 E.02674 G2 X-76.176 Y27.973 I.444 J-1.876 E.07303 G1 X-75.52 Y27.503 E.02674 G3 X-73.713 Y28.059 I.447 J1.763 E.06596 G1 X-73.713 Y30.48 E.08031 G1 X-74.21 Y30.124 E.02029 G2 X-76.176 Y30.816 I-.444 J1.876 E.07303 G1 X-76.831 Y31.286 E.02674 G3 X-78.796 Y30.593 I-.444 J-1.876 E.07303 G1 X-79.451 Y30.124 E.02674 G2 X-81.417 Y30.816 I-.444 J1.876 E.07303 G1 X-82.072 Y31.286 E.02674 G3 X-84.038 Y30.593 I-.444 J-1.876 E.07303 G1 X-84.693 Y30.124 E.02674 G2 X-86.658 Y30.816 I-.444 J1.876 E.07303 G1 X-87.313 Y31.286 E.02674 G3 X-89.279 Y30.593 I-.444 J-1.876 E.07303 G1 X-89.934 Y30.124 E.02674 G1 X-90.687 Y30.077 E.02502 G1 X-90.687 Y32.678 E.0863 G1 X-89.934 Y32.873 E.02579 G2 X-88.624 Y33.906 I6.437 J-6.812 E.05544 G2 X-86.658 Y33.214 I.444 J-1.876 E.07303 G1 X-86.003 Y32.745 E.02674 G3 X-84.038 Y33.437 I.444 J1.876 E.07303 G1 X-83.382 Y33.906 E.02674 G2 X-81.417 Y33.214 I.444 J-1.876 E.07303 G1 X-80.762 Y32.745 E.02674 G3 X-78.796 Y33.437 I.444 J1.876 E.07303 G1 X-78.141 Y33.906 E.02674 G2 X-76.176 Y33.214 I.444 J-1.876 E.07303 G1 X-75.52 Y32.745 E.02674 G3 X-73.555 Y33.437 I.444 J1.876 E.07303 G1 X-72.9 Y33.906 E.02674 G2 X-70.934 Y33.214 I.444 J-1.876 E.07303 G1 X-70.279 Y32.745 E.02674 G3 X-68.314 Y33.437 I.444 J1.876 E.07303 G1 X-67.659 Y33.906 E.02674 G2 X-65.693 Y33.214 I.444 J-1.876 E.07303 G1 X-65.038 Y32.745 E.02674 G3 X-63.072 Y33.437 I.444 J1.876 E.07303 G1 X-62.417 Y33.906 E.02674 G2 X-60.452 Y33.214 I.444 J-1.876 E.07303 G1 X-59.797 Y32.745 E.02674 G3 X-57.831 Y33.437 I.444 J1.876 E.07303 G1 X-57.176 Y33.906 E.02674 G2 X-55.21 Y33.214 I.444 J-1.876 E.07303 G1 X-54.555 Y32.745 E.02674 G3 X-52.59 Y33.437 I.444 J1.876 E.07303 G1 X-51.935 Y33.906 E.02674 G2 X-49.969 Y33.214 I.444 J-1.876 E.07303 G1 X-49.314 Y32.745 E.02674 G3 X-47.348 Y33.437 I.444 J1.876 E.07303 G1 X-46.693 Y33.906 E.02674 G2 X-44.728 Y33.214 I.444 J-1.876 E.07303 G1 X-44.073 Y32.745 E.02674 G3 X-42.107 Y33.437 I.444 J1.876 E.07303 G1 X-41.452 Y33.906 E.02674 G2 X-39.487 Y33.214 I.444 J-1.876 E.07303 G1 X-38.831 Y32.745 E.02674 G3 X-36.866 Y33.437 I.444 J1.876 E.07303 G1 X-36.211 Y33.906 E.02674 G2 X-34.245 Y33.214 I.444 J-1.876 E.07303 G1 X-33.59 Y32.745 E.02674 G3 X-31.625 Y33.437 I.444 J1.876 E.07303 G1 X-30.969 Y33.906 E.02674 G2 X-29.004 Y33.214 I.444 J-1.876 E.07303 G1 X-28.349 Y32.745 E.02674 G3 X-26.383 Y33.437 I.444 J1.876 E.07303 G1 X-25.728 Y33.906 E.02674 G2 X-23.763 Y33.214 I.444 J-1.876 E.07303 G1 X-23.107 Y32.745 E.02674 G3 X-21.142 Y33.437 I.444 J1.876 E.07303 G1 X-20.487 Y33.906 E.02674 G2 X-18.521 Y33.214 I.444 J-1.876 E.07303 G1 X-17.866 Y32.745 E.02674 G3 X-15.901 Y33.437 I.444 J1.876 E.07303 G1 X-15.245 Y33.906 E.02674 G1 X-14.59 Y33.984 E.02189 G1 X-14.213 Y33.866 E.01312 G1 X-14.213 Y31.319 E.08449 G1 X-14.59 Y31.364 E.0126 G1 X-15.245 Y31.158 E.02278 G2 X-16.556 Y30.124 I-6.437 J6.812 E.05544 G2 X-18.521 Y30.816 I-.444 J1.876 E.07303 G1 X-19.176 Y31.286 E.02674 G3 X-21.142 Y30.593 I-.444 J-1.876 E.07303 G1 X-21.797 Y30.124 E.02674 G2 X-23.763 Y30.816 I-.444 J1.876 E.07303 G1 X-24.418 Y31.286 E.02674 G3 X-26.383 Y30.593 I-.444 J-1.876 E.07303 G1 X-27.038 Y30.124 E.02674 G2 X-29.004 Y30.816 I-.444 J1.876 E.07303 G1 X-29.659 Y31.286 E.02674 G3 X-31.187 Y30.97 I-.449 J-1.684 E.05365 G1 X-31.187 Y28.509 E.08165 G1 X-30.969 Y28.665 E.00888 G2 X-29.004 Y27.973 I.444 J-1.876 E.07303 G1 X-28.349 Y27.503 E.02674 G3 X-26.383 Y28.195 I.444 J1.876 E.07303 G1 X-25.728 Y28.665 E.02674 G2 X-23.763 Y27.973 I.444 J-1.876 E.07303 G1 X-23.107 Y27.503 E.02674 G3 X-21.142 Y28.195 I.444 J1.876 E.07303 G1 X-20.487 Y28.665 E.02674 G2 X-18.521 Y27.973 I.444 J-1.876 E.07303 G1 X-17.866 Y27.503 E.02674 G3 X-15.901 Y28.195 I.444 J1.876 E.07303 G1 X-15.245 Y28.665 E.02674 G1 X-14.59 Y28.743 E.02189 G1 X-14.213 Y28.624 E.01312 G1 X-14.213 Y26.077 E.08449 G1 X-14.59 Y26.122 E.0126 G1 X-15.187 Y25.935 E.02074 G1 X-15.187 Y23.431 E.08307 G2 X-14.213 Y23.383 I.434 J-1.105 E.03332 G1 X-14.213 Y20.836 E.08449 G1 X-14.59 Y20.881 E.0126 G1 X-15.187 Y20.694 E.02074 G1 X-15.187 Y19.737 E.03173 G1 X-16.423 Y19.737 E.04099 G1 X-16.556 Y19.641 E.00544 G2 X-17.763 Y19.737 I-.498 J1.389 E.0414 G1 X-19.392 Y19.737 E.05401 G1 X-18.846 Y26.263 F30000 G1 F16200 G1 X-20.213 Y26.263 E.04537 G1 X-20.213 Y26.002 E.00865 G1 X-20.487 Y25.916 E.00952 G1 X-21.142 Y25.352 E.02868 G2 X-23.107 Y25.011 I-1.209 J1.133 E.07101 G1 X-23.763 Y25.575 E.02868 G3 X-25.728 Y25.916 I-1.209 J-1.133 E.07101 G1 X-26.383 Y25.352 E.02868 G2 X-28.349 Y25.011 I-1.209 J1.133 E.07101 G1 X-29.004 Y25.575 E.02868 G3 X-30.969 Y25.916 I-1.209 J-1.133 E.07101 G1 X-31.187 Y25.729 E.00952 G1 X-31.187 Y23.268 E.08165 G1 X-30.969 Y23.424 E.00888 G2 X-29.659 Y23.296 I.513 J-1.519 E.045 G1 X-29.004 Y22.732 E.02868 G3 X-27.038 Y22.39 I1.209 J1.133 E.07101 G1 X-26.383 Y22.954 E.02868 G2 X-24.418 Y23.296 I1.209 J-1.133 E.07101 G1 X-23.763 Y22.732 E.02868 G3 X-21.797 Y22.39 I1.209 J1.133 E.07101 G2 X-20.487 Y23.424 I6.437 J-6.812 E.05544 G1 X-20.213 Y23.456 E.00914 G1 X-20.213 Y20.761 E.0894 G1 X-20.487 Y20.675 E.00952 G1 X-21.142 Y20.111 E.02868 G2 X-23.107 Y19.769 I-1.209 J1.133 E.07101 G1 X-23.763 Y20.333 E.02868 G3 X-25.728 Y20.675 I-1.209 J-1.133 E.07101 G1 X-26.383 Y20.111 E.02868 G2 X-28.349 Y19.769 I-1.209 J1.133 E.07101 G1 X-29.004 Y20.333 E.02868 G3 X-30.969 Y20.675 I-1.209 J-1.133 E.07101 G1 X-31.187 Y20.488 E.00952 G1 X-31.187 Y18.026 E.08165 G1 X-30.969 Y18.182 E.00888 G2 X-29.659 Y18.054 I.513 J-1.519 E.045 G1 X-29.004 Y17.49 E.02868 G3 X-27.038 Y17.149 I1.209 J1.133 E.07101 G1 X-26.383 Y17.713 E.02868 G2 X-24.418 Y18.054 I1.209 J-1.133 E.07101 G1 X-23.763 Y17.49 E.02868 G3 X-21.797 Y17.149 I1.209 J1.133 E.07101 G1 X-21.142 Y17.713 E.02868 G2 X-19.176 Y18.054 I1.209 J-1.133 E.07101 G1 X-18.521 Y17.49 E.02868 G3 X-16.556 Y17.149 I1.209 J1.133 E.07101 G2 X-15.245 Y18.182 I6.437 J-6.812 E.05544 G1 X-14.59 Y18.26 E.02189 G1 X-14.213 Y18.142 E.01312 G1 X-14.213 Y15.595 E.08449 G1 X-14.59 Y15.64 E.0126 G1 X-15.245 Y15.434 E.02278 G1 X-15.901 Y14.87 E.02868 G2 X-17.866 Y14.528 I-1.209 J1.133 E.07101 G1 X-18.521 Y15.092 E.02868 G3 X-20.487 Y15.434 I-1.209 J-1.133 E.07101 G1 X-21.142 Y14.87 E.02868 G2 X-23.107 Y14.528 I-1.209 J1.133 E.07101 G1 X-23.763 Y15.092 E.02868 G3 X-25.728 Y15.434 I-1.209 J-1.133 E.07101 G1 X-26.383 Y14.87 E.02868 G2 X-28.349 Y14.528 I-1.209 J1.133 E.07101 G1 X-29.004 Y15.092 E.02868 G3 X-30.969 Y15.434 I-1.209 J-1.133 E.07101 G1 X-31.187 Y15.247 E.00952 G1 X-31.187 Y12.785 E.08165 G1 X-30.969 Y12.941 E.00888 G2 X-29.659 Y12.813 I.513 J-1.519 E.045 G1 X-29.004 Y12.249 E.02868 G3 X-27.038 Y11.907 I1.209 J1.133 E.07101 G1 X-26.383 Y12.472 E.02868 G2 X-24.418 Y12.813 I1.209 J-1.133 E.07101 G1 X-23.763 Y12.249 E.02868 G3 X-21.797 Y11.907 I1.209 J1.133 E.07101 G1 X-21.142 Y12.472 E.02868 G2 X-19.176 Y12.813 I1.209 J-1.133 E.07101 G1 X-18.521 Y12.249 E.02868 G3 X-16.556 Y11.907 I1.209 J1.133 E.07101 G2 X-15.245 Y12.941 I6.437 J-6.812 E.05544 G1 X-14.59 Y13.019 E.02189 G1 X-14.213 Y12.9 E.01312 G1 X-14.213 Y10.353 E.08449 G1 X-14.59 Y10.398 E.0126 G1 X-15.245 Y10.192 E.02278 G1 X-15.901 Y9.628 E.02868 G2 X-17.866 Y9.287 I-1.209 J1.133 E.07101 G1 X-18.521 Y9.851 E.02868 G3 X-20.487 Y10.192 I-1.209 J-1.133 E.07101 G1 X-21.142 Y9.628 E.02868 G2 X-23.107 Y9.287 I-1.209 J1.133 E.07101 G1 X-23.763 Y9.851 E.02868 G3 X-25.728 Y10.192 I-1.209 J-1.133 E.07101 G1 X-26.383 Y9.628 E.02868 G2 X-28.349 Y9.287 I-1.209 J1.133 E.07101 G1 X-29.004 Y9.851 E.02868 G3 X-30.969 Y10.192 I-1.209 J-1.133 E.07101 G1 X-31.187 Y10.005 E.00952 G1 X-31.187 Y11.634 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-31.187 Y10.005 G1 X-30.969 Y10.192 G1 X-30.889 Y10.218 ;WIPE_END G1 X-31.774 Y17.799 Z1.6 F30000 G1 X-34.659 Y42.482 Z1.6 G1 Z1.2 G1 E.8 F1800 G1 F16200 G2 X-34.686 Y44.077 I2.514 J.841 E.05373 G1 X-34.9 Y44.261 E.00937 G3 X-36.866 Y43.919 I-.756 J-1.475 E.07101 G1 X-37.521 Y43.355 E.02868 G2 X-39.487 Y43.697 I-.756 J1.475 E.07101 G1 X-40.142 Y44.261 E.02868 G3 X-42.107 Y43.919 I-.756 J-1.475 E.07101 G1 X-42.762 Y43.355 E.02868 G2 X-44.728 Y43.697 I-.756 J1.475 E.07101 G1 X-45.383 Y44.261 E.02868 G3 X-47.348 Y43.919 I-.756 J-1.475 E.07101 G1 X-48.004 Y43.355 E.02868 G2 X-49.969 Y43.697 I-.756 J1.475 E.07101 G1 X-50.624 Y44.261 E.02868 G3 X-52.59 Y43.919 I-.756 J-1.475 E.07101 G1 X-53.245 Y43.355 E.02868 G2 X-55.21 Y43.697 I-.756 J1.475 E.07101 G1 X-55.866 Y44.261 E.02868 G3 X-57.831 Y43.919 I-.756 J-1.475 E.07101 G1 X-58.486 Y43.355 E.02868 G2 X-60.452 Y43.697 I-.756 J1.475 E.07101 G1 X-61.107 Y44.261 E.02868 G3 X-63.072 Y43.919 I-.756 J-1.475 E.07101 G1 X-63.728 Y43.355 E.02868 G2 X-65.693 Y43.697 I-.756 J1.475 E.07101 G1 X-66.348 Y44.261 E.02868 G3 X-68.314 Y43.919 I-.756 J-1.475 E.07101 G1 X-68.969 Y43.355 E.02868 G1 X-69.624 Y43.149 E.02278 G1 X-70.092 Y43.205 E.01562 G2 X-71.075 Y41.399 I-2.51 J.196 E.07025 G2 X-70.279 Y40.734 I-3.322 J-4.784 E.03445 G3 X-68.314 Y41.076 I.756 J1.475 E.07101 G1 X-67.659 Y41.64 E.02868 G2 X-65.693 Y41.299 I.756 J-1.475 E.07101 G1 X-65.038 Y40.734 E.02868 G3 X-63.072 Y41.076 I.756 J1.475 E.07101 G1 X-62.417 Y41.64 E.02868 G2 X-60.452 Y41.299 I.756 J-1.475 E.07101 G1 X-59.797 Y40.734 E.02868 G3 X-57.831 Y41.076 I.756 J1.475 E.07101 G1 X-57.176 Y41.64 E.02868 G2 X-55.21 Y41.299 I.756 J-1.475 E.07101 G1 X-54.555 Y40.734 E.02868 G3 X-52.59 Y41.076 I.756 J1.475 E.07101 G1 X-51.935 Y41.64 E.02868 G2 X-49.969 Y41.299 I.756 J-1.475 E.07101 G1 X-49.314 Y40.734 E.02868 G3 X-47.348 Y41.076 I.756 J1.475 E.07101 G1 X-46.693 Y41.64 E.02868 G2 X-44.728 Y41.299 I.756 J-1.475 E.07101 G1 X-44.073 Y40.734 E.02868 G3 X-42.107 Y41.076 I.756 J1.475 E.07101 G1 X-41.452 Y41.64 E.02868 G2 X-39.487 Y41.299 I.756 J-1.475 E.07101 G1 X-38.831 Y40.734 E.02868 G3 X-36.866 Y41.076 I.756 J1.475 E.07101 G1 X-36.211 Y41.64 E.02868 G2 X-34.245 Y41.299 I.756 J-1.475 E.07101 G1 X-33.59 Y40.734 E.02868 G3 X-31.625 Y41.076 I.756 J1.475 E.07101 G3 X-30.712 Y41.721 I-2.63 J4.688 E.03713 G1 X-30.314 Y41.846 E.01384 G1 X-29.659 Y41.768 E.02189 G2 X-28.349 Y40.734 I-5.127 J-7.846 E.05544 G3 X-26.383 Y41.076 I.756 J1.475 E.07101 G1 X-25.728 Y41.64 E.02868 G2 X-23.763 Y41.299 I.756 J-1.475 E.07101 G1 X-23.107 Y40.734 E.02868 G3 X-21.142 Y41.076 I.756 J1.475 E.07101 G1 X-20.487 Y41.64 E.02868 G2 X-18.521 Y41.299 I.756 J-1.475 E.07101 G1 X-17.866 Y40.734 E.02868 G3 X-15.901 Y41.076 I.756 J1.475 E.07101 G1 X-15.245 Y41.64 E.02868 G1 X-14.59 Y41.846 E.02278 G1 X-14.213 Y41.801 E.0126 G1 X-14.213 Y44.348 E.08449 G1 X-14.59 Y44.467 E.01312 G1 X-15.245 Y44.389 E.02189 G3 X-16.556 Y43.355 I5.127 J-7.846 E.05544 G2 X-18.521 Y43.697 I-.756 J1.475 E.07101 G1 X-19.176 Y44.261 E.02868 G3 X-21.142 Y43.919 I-.756 J-1.475 E.07101 G1 X-21.797 Y43.355 E.02868 G2 X-23.763 Y43.697 I-.756 J1.475 E.07101 G1 X-24.418 Y44.261 E.02868 G3 X-26.383 Y43.919 I-.756 J-1.475 E.07101 G1 X-27.038 Y43.355 E.02868 G2 X-29.004 Y43.697 I-.756 J1.475 E.07101 G1 X-29.659 Y44.261 E.02868 G1 X-30.38 Y44.459 E.02479 G2 X-30.13 Y42.884 I-2.384 J-1.185 E.05373 G1 X-20.025 Y46.414 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.483995 G1 F15000 G1 X-20.533 Y46.941 E.02633 G2 X-21.246 Y48.639 I2.548 J2.068 E.06706 G1 X-21.234 Y49.336 E.02507 G1 X-21.212 Y49.528 E.00693 G1 X-20.768 Y49.528 E.01596 G3 X-20.799 Y48.596 I4.052 J-.6 E.03358 G1 X-20.619 Y47.926 E.02494 G1 X-20.334 Y47.413 E.02107 G3 X-19.678 Y46.7 I3.14 J2.23 E.03491 G1 X-19.077 Y46.353 E.02494 G1 X-18.354 Y46.152 E.02699 G1 X-17.603 Y46.144 E.02699 G1 X-16.876 Y46.333 E.02699 G1 X-16.222 Y46.7 E.02698 G1 X-15.688 Y47.228 E.02699 G1 X-15.398 Y47.691 E.01962 ;WIDTH:0.480947 G1 X-15.265 Y48.148 E.01697 ;WIDTH:0.422994 G1 X-15.132 Y48.604 E.01473 G3 X-15.167 Y49.556 I-3.859 J.335 E.02957 G1 X-14.394 Y49.556 E.02394 G1 X-14.394 Y47.367 E.06779 G1 X-14.671 Y47.467 E.00912 G1 X-14.937 Y47.47 E.00823 ;WIDTH:0.48582 G1 X-15.037 Y47.409 E.00424 G1 X-15.337 Y46.973 E.01909 G1 X-15.874 Y46.414 E.02797 G2 X-16.744 Y45.916 I-2.084 J2.632 E.03631 G1 X-17.441 Y45.725 E.02608 G2 X-18.454 Y45.723 I-.513 J3.359 E.03667 G1 X-19.152 Y45.909 E.02609 G2 X-19.992 Y46.391 I1.262 J3.172 E.03507 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-19.614 Y46.135 G1 X-19.152 Y45.909 G1 X-18.454 Y45.723 G1 X-18.148 Y45.701 ;WIPE_END G1 X-14.76 Y49.19 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397572 G1 F15000 G1 X-14.76 Y48.653 E.01552 ;WIDTH:0.419201 G1 X-14.78 Y48.48 E.00533 ;WIDTH:0.462457 G1 X-14.801 Y48.308 E.00594 ;WIDTH:0.505714 G1 X-14.821 Y48.135 E.00655 ;WIDTH:0.527342 G1 X-14.842 Y47.963 E.00686 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.821 Y48.135 ;WIPE_END G1 X-13.529 Y40.613 Z1.6 F30000 G1 X.795 Y-42.79 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X.795 Y-42.355 E.01443 G1 X-6.495 Y-42.355 E.24182 G1 X-6.495 Y-49.645 E.24182 G1 X.795 Y-49.645 E.24182 G1 X.795 Y-42.83 E.22607 G1 X.36 Y-42.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-6.06 Y-42.79 E.19727 G1 X-6.06 Y-49.21 E.19727 G1 X.36 Y-49.21 E.19727 G1 X.36 Y-42.83 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.64 Y-42.818 ;WIPE_END G1 X-6.902 Y-42.052 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-7.298 Y-42.052 E.01313 G1 X-7.298 Y-49.948 E.26192 G1 X-6.902 Y-49.948 E.01313 G1 X-6.902 Y-42.092 E.26059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-7.298 Y-42.052 G1 X-7.298 Y-43.654 ;WIPE_END G1 X.334 Y-43.768 Z1.6 F30000 G1 X1.798 Y-43.79 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X1.798 Y-49.052 E.17455 G1 X5.902 Y-49.052 E.13614 G1 X5.902 Y-42.948 E.20249 G1 X1.798 Y-42.948 E.13614 G1 X1.798 Y-43.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.205 Y-43.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.205 Y-48.645 E.16105 G1 X5.495 Y-48.645 E.10914 G1 X5.495 Y-43.355 E.17548 G1 X2.205 Y-43.355 E.10914 G1 X2.205 Y-43.75 E.0131 G1 X2.64 Y-43.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.64 Y-48.21 E.13581 G1 X5.06 Y-48.21 E.07436 G1 X5.06 Y-43.79 E.13581 G1 X2.68 Y-43.79 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.662 Y-45.79 ;WIPE_END G1 X1.202 Y-42.79 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X1.202 Y-49.948 E.23744 G1 X7.298 Y-49.948 E.20221 G1 X7.298 Y-42.052 E.26192 G1 X1.202 Y-42.052 E.20221 G1 X1.202 Y-42.75 E.02315 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X1.202 Y-44.75 ;WIPE_END G1 X7.705 Y-41.645 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-7.705 Y-41.645 E.51118 G1 X-7.705 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.51118 G1 X7.705 Y-41.685 E.2876 G1 X8.14 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X7.272 Y-42.89 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.443241 G1 F12000 G1 X6.46 Y-42.078 E.03744 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.132 Y-42.316 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.272 Y-43.456 E.05258 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.272 Y-44.022 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.042 Y-42.792 E.05675 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.928 Y-43.245 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.272 Y-44.588 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.272 Y-45.155 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.928 Y-43.811 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.928 Y-44.378 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.272 Y-45.721 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.272 Y-46.287 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.928 Y-44.944 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.928 Y-45.51 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.272 Y-46.853 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.272 Y-47.419 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.928 Y-46.076 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.928 Y-46.642 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.272 Y-47.985 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.272 Y-48.551 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.928 Y-47.208 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.928 Y-47.774 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.272 Y-49.118 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.272 Y-49.684 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.928 Y-48.34 E.06197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.928 Y-48.907 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.943 Y-49.922 E.04682 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-49.5 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X1.406 Y-49.5 E.18719 G1 X1.744 Y-49.744 F30000 ;WIDTH:0.396855 G1 F12000 G1 X1.683 Y-49.622 E.00394 ;WIDTH:0.349664 G1 X1.622 Y-49.5 E.00341 ;WIDTH:0.302473 G1 X1.561 Y-49.378 E.00289 ;WIDTH:0.23217 G1 X1.5 Y-49.256 E.00211 G1 X1.5 Y-42.744 E.10041 ;WIDTH:0.25528 G1 X1.561 Y-42.622 E.00236 ;WIDTH:0.302472 G1 X1.622 Y-42.5 E.00289 ;WIDTH:0.349663 G1 X1.683 Y-42.378 E.00341 ;WIDTH:0.373259 G1 X1.744 Y-42.256 E.00368 G1 X1.406 Y-42.5 F30000 ;WIDTH:0.531684 G1 F12000 G1 X6.106 Y-42.5 E.18719 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.106 Y-42.5 ;WIPE_END G1 X.999 Y-42 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 ;WIDTH:0.345842 G1 F12000 G1 X-6.699 Y-42 E.19 G1 X-6.928 Y-42.867 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.432383 G1 F12000 G1 X-7.272 Y-42.524 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.272 Y-43.075 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.928 Y-43.418 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.928 Y-43.969 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.272 Y-43.625 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.272 Y-44.176 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.928 Y-44.519 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.928 Y-45.07 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.272 Y-44.727 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.272 Y-45.278 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.928 Y-45.621 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.928 Y-46.172 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.272 Y-45.828 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.272 Y-46.379 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.928 Y-46.722 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.928 Y-47.273 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.272 Y-46.93 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.272 Y-47.481 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.928 Y-47.824 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.928 Y-48.375 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.272 Y-48.032 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-7.272 Y-48.582 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-6.928 Y-48.926 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-6.928 Y-49.476 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-7.272 Y-49.133 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-6.928 Y-49.476 ;WIPE_END G1 X-6.699 Y-50 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X.999 Y-50 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-1.001 Y-50 ;WIPE_END G1 X4.931 Y-45.198 Z1.6 F30000 G1 X77.698 Y13.71 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X77.698 Y8.448 E.17455 G1 X81.802 Y8.448 E.13614 G1 X81.802 Y14.552 E.20249 G1 X77.698 Y14.552 E.13614 G1 X77.698 Y13.75 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X78.105 Y13.71 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X78.105 Y8.855 E.16105 G1 X81.395 Y8.855 E.10914 G1 X81.395 Y14.145 E.17548 G1 X78.105 Y14.145 E.10914 G1 X78.105 Y13.75 E.0131 G1 X78.54 Y13.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X78.54 Y9.29 E.13581 G1 X80.96 Y9.29 E.07436 G1 X80.96 Y13.71 E.13581 G1 X78.58 Y13.71 E.07313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X78.562 Y11.71 ;WIPE_END G1 X74.198 Y15.448 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X82.398 Y7.552 E.27519 G1 X82.398 Y15.448 E.26192 G1 X74.238 Y15.448 E.27068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.102 Y15.448 G1 X74.102 Y13.584 ;WIPE_END G1 X81.716 Y14.12 Z1.6 F30000 G1 X90.095 Y14.71 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X90.095 Y15.145 E.01443 G1 X82.805 Y15.145 E.24182 G1 X82.805 Y7.855 E.24182 G1 X90.095 Y7.855 E.24182 G1 X90.095 Y14.67 E.22607 G1 X89.66 Y14.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X83.24 Y14.71 E.19727 G1 X83.24 Y8.29 E.19727 G1 X89.66 Y8.29 E.19727 G1 X89.66 Y14.67 E.19604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.502 Y14.71 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X90.502 Y7.552 E.23744 G1 X90.898 Y7.552 E.01313 G1 X90.898 Y15.448 E.26192 G1 X90.502 Y15.448 E.01313 G1 X90.502 Y14.75 E.02315 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X90.502 Y12.75 ;WIPE_END G1 X83.011 Y14.213 Z1.6 F30000 G1 X74.605 Y15.855 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X91.305 Y7.145 E.58416 G1 X91.305 Y15.855 E.28893 G1 X74.645 Y15.855 E.55264 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.929 Y15.237 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y15.237 E.05361 G3 X75.153 Y14.528 I155.459 J183.396 E.03647 G1 X75.809 Y14.322 E.02278 G1 X76.308 Y14.381 E.01667 G1 X76.308 Y11.858 E.0837 G2 X75.153 Y11.779 I-.665 J1.243 E.03955 G2 X74.313 Y12.408 I3.098 J5.014 E.03486 G1 X74.313 Y9.983 E.08044 G2 X75.153 Y9.287 I-3.478 J-5.048 E.03626 G1 X75.809 Y9.081 E.02278 G1 X76.308 Y9.14 E.01667 G1 X76.308 Y7.763 E.04568 G1 X76.056 Y7.763 E.00834 G1 X77.494 Y8 F30000 ;TYPE:Gap infill ;WIDTH:0.531684 G1 F12000 G1 X82.194 Y8 E.18719 G1 X82.039 Y8.122 F30000 ;WIDTH:0.302466 G1 F12000 G1 X81.978 Y8 E.00289 ;WIDTH:0.349657 G1 X81.917 Y7.878 E.00341 ;WIDTH:0.373252 G1 X81.856 Y7.756 E.00368 G1 X82.039 Y8.122 F30000 ;WIDTH:0.255276 G1 F12000 G1 X82.1 Y8.244 E.00236 ;WIDTH:0.232166 G1 X82.1 Y14.756 E.10041 G1 X82.039 Y14.878 E.00211 ;WIDTH:0.302467 G1 X81.978 Y15 E.00289 ;WIDTH:0.349657 G1 X81.917 Y15.122 E.00341 ;WIDTH:0.396847 G1 X81.856 Y15.244 E.00394 G1 X82.194 Y15 F30000 ;WIDTH:0.531684 G1 F12000 G1 X77.494 Y15 E.18719 G1 X77.672 Y14.429 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.432447 G1 F12000 G1 X76.679 Y15.422 E.04454 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.53 Y15.02 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X77.672 Y13.879 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y13.328 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.53 Y14.469 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.53 Y13.918 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X77.672 Y12.777 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y12.226 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.53 Y13.367 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.53 Y12.817 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X77.672 Y11.675 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y11.124 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.53 Y12.266 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.53 Y11.715 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X77.672 Y10.573 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y10.022 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.53 Y11.164 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.53 Y10.613 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X77.672 Y9.472 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.672 Y8.921 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.53 Y10.062 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.53 Y9.511 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X77.672 Y8.37 E.05124 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.468 Y8.022 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.53 Y8.96 E.04211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.53 Y8.41 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X77.361 Y7.578 E.03731 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X76.53 Y8.41 ;WIPE_END G1 X82.601 Y7.5 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X90.299 Y7.5 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X88.299 Y7.5 ;WIPE_END G1 X90.872 Y14.633 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.432383 G1 F12000 G1 X90.528 Y14.976 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.528 Y14.425 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.872 Y14.082 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.872 Y13.531 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.528 Y13.875 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.528 Y13.324 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.872 Y12.981 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.872 Y12.43 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.528 Y12.773 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.528 Y12.222 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.872 Y11.879 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.872 Y11.328 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.528 Y11.672 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.528 Y11.121 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.872 Y10.778 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.872 Y10.227 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.528 Y10.57 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.528 Y10.019 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.872 Y9.676 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.872 Y9.125 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.528 Y9.468 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.528 Y8.918 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.872 Y8.574 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X90.872 Y8.024 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X90.528 Y8.367 E.0154 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.872 Y8.024 ;WIPE_END G1 X90.299 Y15.5 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X82.601 Y15.5 E.19 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X84.601 Y15.5 ;WIPE_END G1 X78.568 Y20.175 Z1.6 F30000 G1 X55.548 Y38.01 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P17 R91 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z1.6 F30000 G1 Z1.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X49.645 Y-5.756 Z1.6 F30000 G1 X3.102 Y40.648 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X35.998 Y-10.448 E1.09122 G1 X35.998 Y40.648 E1.69494 G1 X3.142 Y40.648 E1.08989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.928 Y39.266 Z1.6 F30000 G1 X35.524 Y38.512 Z1.6 G1 Z1.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.372051 G1 F15000 G1 X34.962 Y39.074 E.02131 G1 X35.499 Y39.074 E.01439 G1 X35.522 Y38.552 E.01401 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y37.817 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420012 G1 F15000 G1 X34.267 Y39.22 E.06098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.67 Y39.817 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X33.035 Y40.452 E.0276 G1 X32.501 Y40.452 E.01639 G1 X35.5 Y37.453 E.13032 G1 X35.5 Y36.92 E.01639 G1 X31.968 Y40.452 E.15349 G1 X31.435 Y40.452 E.01639 G1 X35.5 Y36.387 E.17667 G1 X35.5 Y35.853 E.01639 G1 X30.902 Y40.452 E.19984 G1 X30.368 Y40.452 E.01639 G1 X35.5 Y35.32 E.22302 G1 X35.5 Y34.787 E.01639 G1 X29.835 Y40.452 E.24619 M73 P17 R90 G1 X29.302 Y40.452 E.01639 G1 X35.5 Y34.253 E.26936 G1 X35.5 Y33.72 E.01639 G1 X28.768 Y40.452 E.29254 G1 X28.235 Y40.452 E.01639 G1 X35.5 Y33.187 E.31571 G1 X35.5 Y32.653 E.01639 G1 X27.702 Y40.452 E.33889 G1 X27.169 Y40.452 E.01639 G1 X35.5 Y32.12 E.36206 G1 X35.5 Y31.587 E.01639 G1 X26.635 Y40.452 E.38524 G1 X26.102 Y40.452 E.01639 G1 X35.5 Y31.054 E.40841 G1 X35.5 Y30.52 E.01639 G1 X25.569 Y40.452 E.43159 G1 X25.035 Y40.452 E.01639 G1 X35.5 Y29.987 E.45476 G1 X35.5 Y29.454 E.01639 G1 X24.502 Y40.452 E.47794 G1 X23.969 Y40.452 E.01639 G1 X35.5 Y28.92 E.50111 G1 X35.5 Y28.387 E.01639 G1 X23.436 Y40.452 E.52429 G1 X22.902 Y40.452 E.01639 G1 X35.5 Y27.854 E.54746 G1 X35.5 Y27.321 E.01639 G1 X22.369 Y40.452 E.57064 G1 X21.836 Y40.452 E.01639 G1 X35.5 Y26.787 E.59381 G1 X35.5 Y26.254 E.01639 G1 X21.302 Y40.452 E.61699 G1 X20.769 Y40.452 E.01639 G1 X35.5 Y25.721 E.64016 G1 X35.5 Y25.187 E.01639 G1 X20.236 Y40.452 E.66334 G1 X19.703 Y40.452 E.01639 G1 X35.5 Y24.654 E.68651 G1 X35.5 Y24.121 E.01639 G1 X19.169 Y40.452 E.70968 G1 X18.636 Y40.452 E.01639 G1 X35.5 Y23.588 E.73286 G1 X35.5 Y23.054 E.01639 G1 X18.103 Y40.452 E.75603 G1 X17.569 Y40.452 E.01639 G1 X35.5 Y22.521 E.77921 G1 X35.5 Y21.988 E.01639 G1 X17.036 Y40.452 E.80238 G1 X16.503 Y40.452 E.01639 G1 X35.5 Y21.454 E.82556 G1 X35.5 Y20.921 E.01639 G1 X15.969 Y40.452 E.84873 G1 X15.436 Y40.452 E.01639 G1 X35.5 Y20.388 E.87191 G1 X35.5 Y19.855 E.01639 G1 X14.903 Y40.452 E.89508 G1 X14.37 Y40.452 E.01639 G1 X35.5 Y19.321 E.91826 G1 X35.5 Y18.788 E.01639 G1 X13.836 Y40.452 E.94143 G1 X13.303 Y40.452 E.01639 G1 X35.5 Y18.255 E.96461 G1 X35.5 Y17.721 E.01639 G1 X12.77 Y40.452 E.98778 G1 X12.236 Y40.452 E.01639 G1 X35.5 Y17.188 E1.01096 G1 X35.5 Y16.655 E.01639 G1 X11.703 Y40.452 E1.03413 G1 X11.17 Y40.452 E.01639 G1 X35.5 Y16.122 E1.05731 G1 X35.5 Y15.588 E.01639 G1 X10.637 Y40.452 E1.08048 G1 X10.103 Y40.452 E.01639 G1 X35.5 Y15.055 E1.10366 G1 X35.5 Y14.522 E.01639 G1 X9.57 Y40.452 E1.12683 G1 X9.037 Y40.452 E.01639 G1 X35.5 Y13.988 E1.15 G1 X35.5 Y13.455 E.01639 G1 X8.503 Y40.452 E1.17318 G1 X7.97 Y40.452 E.01639 G1 X35.5 Y12.922 E1.19635 G1 X35.5 Y12.389 E.01639 G1 X7.437 Y40.452 E1.21953 G1 X6.904 Y40.452 E.01639 G1 X35.5 Y11.855 E1.2427 G1 X35.5 Y11.322 E.01639 G1 X6.37 Y40.452 E1.26588 G1 X5.837 Y40.452 E.01639 G1 X35.5 Y10.789 E1.28905 G1 X35.5 Y10.255 E.01639 G1 X5.304 Y40.452 E1.31223 G1 X4.77 Y40.452 E.01639 G1 X35.5 Y9.722 E1.3354 G1 X35.5 Y9.189 E.01639 G1 X4.237 Y40.452 E1.35858 G1 X3.704 Y40.452 E.01639 G1 X35.5 Y8.656 E1.38175 G1 X35.5 Y8.122 E.01639 G1 X3.6 Y40.023 E1.38627 G1 X3.6 Y39.489 E.01639 G1 X35.5 Y7.589 E1.38627 G1 X35.5 Y7.056 E.01639 G1 X3.6 Y38.956 E1.38627 G1 X3.6 Y38.423 E.01639 G1 X35.5 Y6.522 E1.38627 G1 X35.5 Y5.989 E.01639 G1 X3.6 Y37.89 E1.38627 G1 X3.6 Y37.356 E.01639 G1 X35.5 Y5.456 E1.38627 G1 X35.5 Y4.922 E.01639 G1 X3.6 Y36.823 E1.38627 G1 X3.6 Y36.29 E.01639 G1 X35.5 Y4.389 E1.38627 G1 X35.5 Y3.856 E.01639 G1 X3.6 Y35.756 E1.38627 G1 X3.6 Y35.223 E.01639 G1 X35.5 Y3.323 E1.38627 G1 X35.5 Y2.789 E.01639 G1 X3.6 Y34.69 E1.38627 G1 X3.6 Y34.156 E.01639 G1 X35.5 Y2.256 E1.38627 G1 X35.5 Y1.723 E.01639 G1 X3.6 Y33.623 E1.38627 G1 X3.6 Y33.09 E.01639 G1 X35.5 Y1.189 E1.38627 G1 X35.5 Y.656 E.01639 G1 X3.6 Y32.557 E1.38627 G1 X3.6 Y32.023 E.01639 G1 X35.5 Y.123 E1.38627 G1 X35.5 Y-.41 E.01639 G1 X3.6 Y31.49 E1.38627 G1 X3.6 Y30.957 E.01639 G1 X35.5 Y-.944 E1.38627 G1 X35.5 Y-1.477 E.01639 G1 X3.6 Y30.423 E1.38627 G1 X3.6 Y29.89 E.01639 G1 X35.5 Y-2.01 E1.38627 G1 X35.5 Y-2.544 E.01639 G1 X3.6 Y29.357 E1.38627 G1 X3.6 Y28.824 E.01639 G1 X35.5 Y-3.077 E1.38627 G1 X35.5 Y-3.61 E.01639 G1 X3.6 Y28.29 E1.38627 G1 X3.6 Y27.757 E.01639 G1 X35.5 Y-4.143 E1.38627 G1 X35.5 Y-4.677 E.01639 G1 X3.6 Y27.224 E1.38627 G1 X3.6 Y26.69 E.01639 G1 X35.5 Y-5.21 E1.38627 G1 X35.5 Y-5.743 E.01639 G1 X3.6 Y26.157 E1.38627 G1 X3.6 Y25.624 E.01639 G1 X35.5 Y-6.277 E1.38627 G1 X35.5 Y-6.81 E.01639 G1 X3.6 Y25.091 E1.38627 G1 X3.6 Y24.557 E.01639 G1 X35.5 Y-7.343 E1.38627 G1 X35.5 Y-7.876 E.01639 G1 X3.6 Y24.024 E1.38627 G1 X3.6 Y23.491 E.01639 G1 X35.5 Y-8.41 E1.38627 G1 X35.5 Y-8.943 E.01639 G1 X3.6 Y22.957 E1.38627 G1 X3.6 Y22.424 E.01639 G1 X35.5 Y-9.476 E1.38627 G1 X35.5 Y-10.01 E.01639 G1 X3.6 Y21.891 E1.38627 G1 X3.6 Y21.358 E.01639 G1 X35.209 Y-10.252 E1.37363 G1 X34.676 Y-10.252 E.01639 G1 X3.6 Y20.824 E1.35045 G1 X3.6 Y20.291 E.01639 G1 X34.143 Y-10.252 E1.32728 G1 X33.609 Y-10.252 E.01639 G1 X3.6 Y19.758 E1.3041 G1 X3.6 Y19.224 E.01639 G1 X33.076 Y-10.252 E1.28093 G1 X32.543 Y-10.252 E.01639 G1 X3.6 Y18.691 E1.25776 G1 X3.6 Y18.158 E.01639 G1 X32.01 Y-10.252 E1.23458 G1 X31.476 Y-10.252 E.01639 G1 X3.6 Y17.625 E1.21141 G1 X3.6 Y17.091 E.01639 G1 X30.943 Y-10.252 E1.18823 G1 X30.41 Y-10.252 E.01639 G1 X3.6 Y16.558 E1.16506 G1 X3.6 Y16.025 E.01639 G1 X29.876 Y-10.252 E1.14188 G1 X29.343 Y-10.252 E.01639 G1 X3.6 Y15.491 E1.11871 G1 X3.6 Y14.958 E.01639 G1 X28.81 Y-10.252 E1.09553 G1 X28.276 Y-10.252 E.01639 G1 X3.6 Y14.425 E1.07236 G1 X3.6 Y13.892 E.01639 G1 X27.743 Y-10.252 E1.04918 G1 X27.21 Y-10.252 E.01639 G1 X3.6 Y13.358 E1.02601 G1 X3.6 Y12.825 E.01639 G1 X26.677 Y-10.252 E1.00283 G1 X26.143 Y-10.252 E.01639 G1 X3.6 Y12.292 E.97966 G1 X3.6 Y11.758 E.01639 G1 X25.61 Y-10.252 E.95648 G1 X25.077 Y-10.252 E.01639 G1 X3.6 Y11.225 E.93331 G1 X3.6 Y10.692 E.01639 G1 X24.543 Y-10.252 E.91013 G1 X24.01 Y-10.252 E.01639 G1 X3.6 Y10.159 E.88696 G1 X3.6 Y9.625 E.01639 G1 X23.477 Y-10.252 E.86379 G1 X22.944 Y-10.252 E.01639 G1 X3.6 Y9.092 E.84061 G1 X3.6 Y8.559 E.01639 G1 X22.41 Y-10.252 E.81744 G1 X21.877 Y-10.252 E.01639 G1 X3.6 Y8.025 E.79426 G1 X3.6 Y7.492 E.01639 G1 X21.344 Y-10.252 E.77109 G1 X20.81 Y-10.252 E.01639 G1 X3.6 Y6.959 E.74791 G1 X3.6 Y6.425 E.01639 G1 X20.277 Y-10.252 E.72474 G1 X19.744 Y-10.252 E.01639 G1 X3.6 Y5.892 E.70156 G1 X3.6 Y5.359 E.01639 G1 X19.211 Y-10.252 E.67839 G1 X18.677 Y-10.252 E.01639 G1 X3.6 Y4.826 E.65521 G1 X3.6 Y4.292 E.01639 G1 X18.144 Y-10.252 E.63204 G1 X17.611 Y-10.252 E.01639 G1 X3.6 Y3.759 E.60886 G1 X3.6 Y3.226 E.01639 G1 X17.077 Y-10.252 E.58569 G1 X16.544 Y-10.252 E.01639 G1 X3.6 Y2.692 E.56251 G1 X3.6 Y2.159 E.01639 G1 X16.011 Y-10.252 E.53934 G1 X15.478 Y-10.252 E.01639 G1 X3.6 Y1.626 E.51616 G1 X3.6 Y1.093 E.01639 G1 X14.944 Y-10.252 E.49299 G1 X14.411 Y-10.252 E.01639 G1 X3.6 Y.559 E.46981 G1 X3.6 Y.026 E.01639 G1 X13.878 Y-10.252 E.44664 G1 X13.344 Y-10.252 E.01639 G1 X3.6 Y-.507 E.42347 G1 X3.6 Y-1.041 E.01639 G1 X12.811 Y-10.252 E.40029 G1 X12.278 Y-10.252 E.01639 G1 X3.6 Y-1.574 E.37712 G1 X3.6 Y-2.107 E.01639 G1 X11.745 Y-10.252 E.35394 G1 X11.211 Y-10.252 E.01639 G1 X3.6 Y-2.64 E.33077 G1 X3.6 Y-3.174 E.01639 G1 X10.678 Y-10.252 E.30759 G1 X10.145 Y-10.252 E.01639 G1 X3.6 Y-3.707 E.28442 G1 X3.6 Y-4.24 E.01639 G1 X9.611 Y-10.252 E.26124 G1 X9.078 Y-10.252 E.01639 G1 X3.6 Y-4.774 E.23807 G1 X3.6 Y-5.307 E.01639 G1 X8.545 Y-10.252 E.21489 G1 X8.012 Y-10.252 E.01639 G1 X3.6 Y-5.84 E.19172 G1 X3.6 Y-6.373 E.01639 G1 X7.478 Y-10.252 E.16854 G1 X6.945 Y-10.252 E.01639 G1 X3.6 Y-6.907 E.14537 G1 X3.6 Y-7.44 E.01639 G1 X6.412 Y-10.252 E.12219 G1 X5.878 Y-10.252 E.01639 G1 X3.6 Y-7.973 E.09902 G1 X3.6 Y-8.507 E.01639 G1 X5.345 Y-10.252 E.07584 G1 X4.812 Y-10.252 E.01639 G1 X3.6 Y-9.04 E.05267 G1 X3.6 Y-9.573 E.01639 G1 X4.448 Y-10.422 E.03687 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.624 Y-10.096 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.421606 G1 F15000 G1 X3.553 Y-10.055 E.00253 G1 X3.628 Y-10.02 E.00254 ;LAYER_CHANGE ;Z:1.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.553 Y-10.055 G1 X3.624 Y-10.096 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z1.8 I-.928 J-.787 P1 F30000 G1 X-31.398 Y31.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.031 Y25.231 Z1.8 F30000 G1 X-64.59 Y-6.461 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.608 Y-6.68 E.0073 G3 X-63.274 Y-8.67 I2.153 J.001 E.08428 G3 X-62.707 Y-8.817 I.788 J1.873 E.01952 G3 X-64.59 Y-6.398 I.251 J2.138 E.33554 G1 X-64.59 Y-6.421 E.00074 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y-6.487 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.2 Y-6.68 E.00641 G3 X-63.118 Y-8.293 I1.745 J0 E.06833 G3 X-62.656 Y-8.413 I.64 J1.524 E.01588 G3 X-64.184 Y-6.447 I.202 J1.733 E.27176 G1 X-63.749 Y-6.519 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.756 Y-6.852 E.01022 G3 X-62.788 Y-7.946 I1.297 J.172 E.04763 G1 X-62.603 Y-7.98 E.00579 G3 X-63.752 Y-6.481 I.144 J1.301 E.18785 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.756 Y-6.852 G1 X-63.716 Y-7.021 G1 X-63.585 Y-7.335 G1 X-63.489 Y-7.479 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.788 Y-7.946 G1 X-62.702 Y-7.962 ;WIPE_END G1 X-55.101 Y-7.276 Z1.8 F30000 G1 X-40.428 Y-5.952 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.475 Y-5.836 E.00416 G3 X-43.274 Y-8.67 I-1.981 J-.844 E.27989 G3 X-42.707 Y-8.817 I.788 J1.873 E.01952 G3 X-40.377 Y-6.117 I.251 J2.138 E.13941 G1 X-40.417 Y-5.99 E.0044 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.812 Y-6.088 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.85 Y-5.994 E.00337 G3 X-43.118 Y-8.293 I-1.605 J-.686 E.22683 G3 X-42.656 Y-8.413 I.64 J1.524 E.01588 G3 X-40.77 Y-6.225 I.202 J1.733 E.11288 G1 X-40.8 Y-6.127 E.00342 G1 X-41.228 Y-6.234 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.323 Y-6.029 E.00692 G3 X-42.788 Y-7.946 I-1.136 J-.651 E.15837 G1 X-42.603 Y-7.98 E.00579 G3 X-41.194 Y-6.342 I.144 J1.301 E.07811 G1 X-41.216 Y-6.272 E.00227 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.323 Y-6.029 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.791 Y-5.414 G1 X-42.811 Y-5.423 ;WIPE_END G1 X-35.197 Y-5.947 Z1.8 F30000 G1 X-16.24 Y-7.252 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-15.398 Y-7.252 E.02793 G1 X-15.398 Y-1.748 E.18258 G1 X-20.002 Y-1.748 E.15273 G1 X-20.002 Y-7.252 E.18258 G1 X-16.28 Y-7.252 E.12347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.24 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-15.805 Y-6.845 E.01443 G1 X-15.805 Y-2.155 E.15558 G1 X-19.595 Y-2.155 E.12572 G1 X-19.595 Y-6.845 E.15558 G1 X-16.28 Y-6.845 E.10996 G1 X-16.24 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-17.216 Y3.162 Z1.8 F30000 G1 X-20.002 Y25.21 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.225 Y29.656 Z1.8 F30000 G1 X-33.172 Y45.345 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.275 Y45.311 E.0036 G3 X-33.274 Y41.33 I.819 J-1.991 E.16858 G3 X-32.707 Y41.182 I.789 J1.874 E.01952 G3 X-33.008 Y45.401 I.251 J2.138 E.25121 G1 X-33.134 Y45.358 E.00442 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.041 Y44.96 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.119 Y44.934 E.00272 G3 X-33.118 Y41.707 I.664 J-1.614 E.13667 G3 X-32.656 Y41.587 I.641 J1.525 E.01588 G3 X-32.902 Y45.007 I.202 J1.733 E.20355 G1 X-33.003 Y44.973 E.00353 G1 X-32.901 Y44.539 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.107 Y44.457 E.0068 G3 X-32.788 Y42.054 I.648 J-1.137 E.09526 G1 X-32.603 Y42.02 E.00579 G3 X-32.789 Y44.587 I.144 J1.301 E.14108 G1 X-32.864 Y44.555 E.0025 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.107 Y44.457 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.586 Y43.974 G1 X-33.716 Y43.659 G1 X-33.75 Y43.49 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.706 Y42.956 ;WIPE_END G1 X-41.324 Y43.418 Z1.8 F30000 G1 X-73.16 Y45.349 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.275 Y45.311 E.00402 G3 X-73.274 Y41.33 I.819 J-1.991 E.16858 G3 X-72.707 Y41.182 I.789 J1.874 E.01952 G3 X-73.008 Y45.401 I.251 J2.138 E.25121 G1 X-73.122 Y45.362 E.004 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.029 Y44.964 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.119 Y44.934 E.00314 G3 X-73.118 Y41.707 I.664 J-1.614 E.13667 G3 X-72.656 Y41.587 I.641 J1.525 E.01588 G3 X-72.902 Y45.007 I.202 J1.733 E.20355 G1 X-72.991 Y44.977 E.00311 G1 X-72.889 Y44.544 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.107 Y44.457 E.00719 G3 X-72.788 Y42.054 I.648 J-1.137 E.09526 G1 X-72.603 Y42.02 E.00579 G3 X-72.789 Y44.587 I.144 J1.301 E.14108 G1 X-72.853 Y44.56 E.00211 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.107 Y44.457 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.749 Y43.491 G1 X-73.76 Y43.32 G1 X-73.716 Y42.981 G1 X-73.71 Y42.968 ;WIPE_END G1 X-77.867 Y36.567 Z1.8 F30000 G1 X-88.66 Y19.948 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-87.203 Y13.189 Z1.8 F30000 G1 X-88.66 Y-7.252 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y-7.252 E.1248 G1 X-84.898 Y-1.748 E.18258 G1 X-89.502 Y-1.748 E.15273 G1 X-89.502 Y-7.252 E.18258 G1 X-88.7 Y-7.252 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y-6.845 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y-6.845 E.11129 G1 X-85.305 Y-2.155 E.15558 G1 X-89.095 Y-2.155 E.12572 G1 X-89.095 Y-6.845 E.15558 G1 X-88.7 Y-6.845 E.0131 G1 X-88.66 Y-6.41 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-79.052 Y-7.007 Z1.8 F30000 G1 X-17.443 Y-11.948 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-14.002 Y-8.507 I1.494 J1.947 E.27712 G1 X-14.002 Y49.948 E1.93905 G1 X-15.685 Y49.948 E.05584 G2 X-20.215 Y49.948 I-2.265 J-.945 E.32013 G1 X-84.685 Y49.948 E2.13862 G2 X-89.215 Y49.948 I-2.265 J-.945 E.32013 G1 X-90.898 Y49.948 E.05584 G1 X-90.898 Y-8.507 E1.93905 G2 X-87.457 Y-11.948 I1.947 J-1.494 E.27712 G1 X-84.398 Y-11.948 E.10147 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-17.483 Y-11.948 E.10014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.685 Y-11.735 G1 X-17.897 Y-11.494 G1 X-18.076 Y-11.227 G1 X-18.218 Y-10.939 G1 X-18.321 Y-10.635 G1 X-18.383 Y-10.32 G1 X-18.39 Y-10.219 ;WIPE_END G1 X-15.421 Y-11.975 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X-15.95 Y-7.954 I-.533 J1.975 E.1952 G3 X-16.217 Y-12.029 I.005 J-2.047 E.20409 G3 X-15.459 Y-11.985 I.263 J2.029 E.02532 G1 X-15.534 Y-11.554 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-15.95 Y-8.39 I-.42 J1.555 E.14229 G3 X-16.16 Y-11.597 I.004 J-1.611 E.14878 G3 X-15.572 Y-11.564 I.207 J1.597 E.0182 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.334 Y-11.488 G1 X-15.145 Y-11.395 G1 X-14.97 Y-11.278 G1 X-14.811 Y-11.139 G1 X-14.672 Y-10.98 G1 X-14.555 Y-10.805 G1 X-14.462 Y-10.616 G1 X-14.394 Y-10.417 G1 X-14.353 Y-10.21 G1 X-14.349 Y-10.146 ;WIPE_END G1 X-14.457 Y-11.948 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-14.002 Y-11.948 E.01508 G1 X-14.002 Y-11.493 E.01508 G2 X-14.425 Y-11.923 I-1.955 J1.5 E.02007 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-14.002 Y-11.948 G1 X-14.002 Y-11.493 G1 X-14.215 Y-11.735 G1 X-14.425 Y-11.923 ;WIPE_END G1 X-22.049 Y-11.551 Z1.8 F30000 G1 X-89.972 Y-8.23 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G3 X-89.217 Y-12.029 I1.027 J-1.771 E.16857 G3 X-88.95 Y-7.954 I.263 J2.029 E.22184 G3 X-89.937 Y-8.21 I.005 J-2.047 E.0342 G1 X-89.754 Y-8.607 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-89.16 Y-11.597 I.808 J-1.393 E.12288 G3 X-88.95 Y-8.39 I.207 J1.597 E.16172 G3 X-89.719 Y-8.587 I.004 J-1.611 E.02467 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-89.93 Y-8.722 G1 X-90.089 Y-8.861 G1 X-90.228 Y-9.02 G1 X-90.345 Y-9.195 G1 X-90.438 Y-9.384 G1 X-90.506 Y-9.583 G1 X-90.547 Y-9.79 G1 X-90.56 Y-10 G1 X-90.547 Y-10.21 G1 X-90.534 Y-10.273 ;WIPE_END G1 X-90.898 Y-11.493 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-90.898 Y-11.948 E.01508 G1 X-90.443 Y-11.948 E.01508 G1 X-90.685 Y-11.735 E.01069 G1 X-90.872 Y-11.523 E.00936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-90.898 Y-11.948 G1 X-90.443 Y-11.948 G1 X-90.685 Y-11.735 G1 X-90.872 Y-11.523 ;WIPE_END G1 X-83.24 Y-11.612 Z1.8 F30000 G1 X-19.66 Y-12.355 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-13.595 Y-12.355 E.20119 G1 X-13.595 Y50.355 E2.08021 G1 X-16.399 Y50.355 E.09303 G2 X-16.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-19.722 Y50.023 I-1.447 J1.447 E.19549 G1 X-19.501 Y50.355 E.01324 G1 X-85.399 Y50.355 E2.18599 G2 X-85.503 Y47.553 I-1.608 J-1.344 E.10189 G2 X-88.722 Y50.023 I-1.447 J1.447 E.19549 G1 X-88.501 Y50.355 E.01324 G1 X-91.305 Y50.355 E.09303 G1 X-91.305 Y-12.355 E2.08021 G1 X-84.805 Y-12.355 E.21562 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-19.7 Y-12.355 E.0131 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-17.7 Y-12.355 ;WIPE_END G1 X-17.902 Y-4.725 Z1.8 F30000 G1 X-19.348 Y49.799 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.435 Y49.615 E.00626 G3 X-18.16 Y47.403 I1.489 J-.615 E.09055 G3 X-17.95 Y50.61 I.207 J1.597 E.16172 G3 X-19.325 Y49.832 I.004 J-1.611 E.05076 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.435 Y49.615 G1 X-19.506 Y49.417 G1 X-19.547 Y49.21 G1 X-19.56 Y49 G1 X-19.547 Y48.79 G1 X-19.506 Y48.583 G1 X-19.438 Y48.384 G1 X-19.345 Y48.195 G1 X-19.228 Y48.02 G1 X-19.18 Y47.965 ;WIPE_END G1 X-26.81 Y48.167 Z1.8 F30000 G1 X-88.351 Y49.793 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-88.435 Y49.615 E.00606 G3 X-87.16 Y47.403 I1.489 J-.615 E.09055 G3 X-86.95 Y50.61 I.207 J1.597 E.16172 G3 X-88.329 Y49.827 I.004 J-1.611 E.05095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-88.435 Y49.615 G1 X-88.506 Y49.417 G1 X-88.547 Y49.21 G1 X-88.56 Y49 G1 X-88.547 Y48.79 G1 X-88.506 Y48.583 G1 X-88.438 Y48.384 G1 X-88.345 Y48.195 G1 X-88.228 Y48.02 G1 X-88.176 Y47.961 ;WIPE_END G1 X-82.465 Y42.897 Z1.8 F30000 G1 X-19.66 Y-12.79 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-91.74 Y50.79 E2.41454 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-20.713 Y-11.946 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-20.713 Y-13.574 E.05401 G1 X-21.142 Y-13.937 E.01863 G2 X-23.107 Y-14.31 I-1.234 J1.136 E.07111 G1 X-23.763 Y-13.756 E.02846 G3 X-25.728 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-26.383 Y-13.937 E.02846 G2 X-28.349 Y-14.31 I-1.234 J1.136 E.07111 G1 X-29.004 Y-13.756 E.02846 G3 X-30.969 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-31.625 Y-13.937 E.02846 G2 X-33.59 Y-14.31 I-1.234 J1.136 E.07111 G1 X-34.245 Y-13.756 E.02846 G3 X-36.211 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-36.866 Y-13.937 E.02846 G2 X-38.831 Y-14.31 I-1.234 J1.136 E.07111 G1 X-39.487 Y-13.756 E.02846 G3 X-41.452 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-42.107 Y-13.937 E.02846 G2 X-44.073 Y-14.31 I-1.234 J1.136 E.07111 G1 X-44.728 Y-13.756 E.02846 G3 X-46.693 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-47.348 Y-13.937 E.02846 G2 X-49.314 Y-14.31 I-1.234 J1.136 E.07111 G1 X-49.969 Y-13.756 E.02846 G3 X-51.935 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-52.59 Y-13.937 E.02846 G2 X-54.555 Y-14.31 I-1.234 J1.136 E.07111 G1 X-55.21 Y-13.756 E.02846 G3 X-57.176 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-57.831 Y-13.937 E.02846 G2 X-59.797 Y-14.31 I-1.234 J1.136 E.07111 G1 X-60.452 Y-13.756 E.02846 G3 X-62.417 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-63.072 Y-13.937 E.02846 G2 X-65.038 Y-14.31 I-1.234 J1.136 E.07111 G1 X-65.693 Y-13.756 E.02846 G3 X-67.659 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-68.314 Y-13.937 E.02846 G2 X-70.279 Y-14.31 I-1.234 J1.136 E.07111 G1 X-70.934 Y-13.756 E.02846 G3 X-72.9 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-73.555 Y-13.937 E.02846 G2 X-75.52 Y-14.31 I-1.234 J1.136 E.07111 G1 X-76.176 Y-13.756 E.02846 G3 X-78.141 Y-13.383 I-1.234 J-1.136 E.07111 G1 X-78.796 Y-13.937 E.02846 G2 X-80.762 Y-14.31 I-1.234 J1.136 E.07111 G1 X-81.417 Y-13.756 E.02846 G3 X-83.382 Y-13.383 I-1.234 J-1.136 E.07111 G2 X-84.187 Y-14.045 I-4.984 J5.23 E.0346 G1 X-84.187 Y-16.503 E.08153 G1 X-84.038 Y-16.377 E.00648 G2 X-82.072 Y-16.003 I1.234 J-1.136 E.07111 G1 X-81.417 Y-16.557 E.02846 G3 X-79.451 Y-16.931 I1.234 J1.136 E.07111 G1 X-78.796 Y-16.377 E.02846 G2 X-76.831 Y-16.003 I1.234 J-1.136 E.07111 G1 X-76.176 Y-16.557 E.02846 G3 X-74.21 Y-16.931 I1.234 J1.136 E.07111 G1 X-73.555 Y-16.377 E.02846 G2 X-71.59 Y-16.003 I1.234 J-1.136 E.07111 G1 X-70.934 Y-16.557 E.02846 G3 X-68.969 Y-16.931 I1.234 J1.136 E.07111 G1 X-68.314 Y-16.377 E.02846 G2 X-66.348 Y-16.003 I1.234 J-1.136 E.07111 G1 X-65.693 Y-16.557 E.02846 G3 X-63.728 Y-16.931 I1.234 J1.136 E.07111 G1 X-63.072 Y-16.377 E.02846 G2 X-61.107 Y-16.003 I1.234 J-1.136 E.07111 G1 X-60.452 Y-16.557 E.02846 G3 X-58.486 Y-16.931 I1.234 J1.136 E.07111 G1 X-57.831 Y-16.377 E.02846 G2 X-55.866 Y-16.003 I1.234 J-1.136 E.07111 G1 X-55.21 Y-16.557 E.02846 G3 X-53.245 Y-16.931 I1.234 J1.136 E.07111 G1 X-52.59 Y-16.377 E.02846 G2 X-50.624 Y-16.003 I1.234 J-1.136 E.07111 G1 X-49.969 Y-16.557 E.02846 G3 X-48.004 Y-16.931 I1.234 J1.136 E.07111 G1 X-47.348 Y-16.377 E.02846 G2 X-45.383 Y-16.003 I1.234 J-1.136 E.07111 G1 X-44.728 Y-16.557 E.02846 G3 X-42.762 Y-16.931 I1.234 J1.136 E.07111 G1 X-42.107 Y-16.377 E.02846 G2 X-40.142 Y-16.003 I1.234 J-1.136 E.07111 G1 X-39.487 Y-16.557 E.02846 G3 X-37.521 Y-16.931 I1.234 J1.136 E.07111 G1 X-36.866 Y-16.377 E.02846 G2 X-34.9 Y-16.003 I1.234 J-1.136 E.07111 G1 X-34.245 Y-16.557 E.02846 G3 X-32.28 Y-16.931 I1.234 J1.136 E.07111 G1 X-31.625 Y-16.377 E.02846 G2 X-29.659 Y-16.003 I1.234 J-1.136 E.07111 G1 X-29.004 Y-16.557 E.02846 G3 X-27.038 Y-16.931 I1.234 J1.136 E.07111 G1 X-26.383 Y-16.377 E.02846 G2 X-24.418 Y-16.003 I1.234 J-1.136 E.07111 G1 X-23.763 Y-16.557 E.02846 G3 X-21.797 Y-16.931 I1.234 J1.136 E.07111 G2 X-20.713 Y-16.064 I6.532 J-7.061 E.04607 G1 X-20.713 Y-18.815 E.09125 G1 X-21.142 Y-19.178 E.01863 G2 X-23.107 Y-19.551 I-1.234 J1.136 E.07111 G1 X-23.763 Y-18.997 E.02846 G3 X-25.728 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-26.383 Y-19.178 E.02846 G2 X-28.349 Y-19.551 I-1.234 J1.136 E.07111 G1 X-29.004 Y-18.997 E.02846 G3 X-30.969 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-31.625 Y-19.178 E.02846 G2 X-33.59 Y-19.551 I-1.234 J1.136 E.07111 G1 X-34.245 Y-18.997 E.02846 G3 X-36.211 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-36.866 Y-19.178 E.02846 G2 X-38.831 Y-19.551 I-1.234 J1.136 E.07111 G1 X-39.487 Y-18.997 E.02846 G3 X-41.452 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-42.107 Y-19.178 E.02846 G2 X-44.073 Y-19.551 I-1.234 J1.136 E.07111 G1 X-44.728 Y-18.997 E.02846 G3 X-46.693 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-47.348 Y-19.178 E.02846 G2 X-49.314 Y-19.551 I-1.234 J1.136 E.07111 G1 X-49.969 Y-18.997 E.02846 G3 X-51.935 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-52.59 Y-19.178 E.02846 G2 X-54.555 Y-19.551 I-1.234 J1.136 E.07111 G1 X-55.21 Y-18.997 E.02846 G3 X-57.176 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-57.831 Y-19.178 E.02846 G2 X-59.797 Y-19.551 I-1.234 J1.136 E.07111 G1 X-60.452 Y-18.997 E.02846 G3 X-62.417 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-63.072 Y-19.178 E.02846 G2 X-65.038 Y-19.551 I-1.234 J1.136 E.07111 G1 X-65.693 Y-18.997 E.02846 G3 X-67.659 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-68.314 Y-19.178 E.02846 G2 X-70.279 Y-19.551 I-1.234 J1.136 E.07111 G1 X-70.934 Y-18.997 E.02846 G3 X-72.9 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-73.555 Y-19.178 E.02846 G2 X-75.52 Y-19.551 I-1.234 J1.136 E.07111 G1 X-76.176 Y-18.997 E.02846 G3 X-78.141 Y-18.624 I-1.234 J-1.136 E.07111 G1 X-78.796 Y-19.178 E.02846 G2 X-80.762 Y-19.551 I-1.234 J1.136 E.07111 G1 X-81.417 Y-18.997 E.02846 G3 X-83.382 Y-18.624 I-1.234 J-1.136 E.07111 G2 X-84.187 Y-19.287 I-4.984 J5.23 E.0346 G1 X-84.187 Y-21.744 E.08153 G1 X-84.038 Y-21.618 E.00648 G2 X-82.072 Y-21.244 I1.234 J-1.136 E.07111 G1 X-81.417 Y-21.798 E.02846 G3 X-79.451 Y-22.172 I1.234 J1.136 E.07111 G1 X-78.796 Y-21.618 E.02846 G2 X-76.831 Y-21.244 I1.234 J-1.136 E.07111 G1 X-76.176 Y-21.798 E.02846 G3 X-74.21 Y-22.172 I1.234 J1.136 E.07111 G1 X-73.555 Y-21.618 E.02846 G2 X-71.59 Y-21.244 I1.234 J-1.136 E.07111 G1 X-70.934 Y-21.798 E.02846 G3 X-68.969 Y-22.172 I1.234 J1.136 E.07111 G1 X-68.314 Y-21.618 E.02846 G2 X-66.348 Y-21.244 I1.234 J-1.136 E.07111 G1 X-65.693 Y-21.798 E.02846 G3 X-63.728 Y-22.172 I1.234 J1.136 E.07111 G1 X-63.072 Y-21.618 E.02846 G2 X-61.107 Y-21.244 I1.234 J-1.136 E.07111 G1 X-60.452 Y-21.798 E.02846 G3 X-58.486 Y-22.172 I1.234 J1.136 E.07111 G1 X-57.831 Y-21.618 E.02846 G2 X-55.866 Y-21.244 I1.234 J-1.136 E.07111 G1 X-55.21 Y-21.798 E.02846 G3 X-53.245 Y-22.172 I1.234 J1.136 E.07111 G1 X-52.59 Y-21.618 E.02846 G2 X-50.624 Y-21.244 I1.234 J-1.136 E.07111 G1 X-49.969 Y-21.798 E.02846 G3 X-48.004 Y-22.172 I1.234 J1.136 E.07111 G1 X-47.348 Y-21.618 E.02846 G2 X-45.383 Y-21.244 I1.234 J-1.136 E.07111 G1 X-44.728 Y-21.798 E.02846 G3 X-42.762 Y-22.172 I1.234 J1.136 E.07111 G1 X-42.107 Y-21.618 E.02846 G2 X-40.142 Y-21.244 I1.234 J-1.136 E.07111 G1 X-39.487 Y-21.798 E.02846 G3 X-37.521 Y-22.172 I1.234 J1.136 E.07111 G1 X-36.866 Y-21.618 E.02846 G2 X-34.9 Y-21.244 I1.234 J-1.136 E.07111 G1 X-34.245 Y-21.798 E.02846 G3 X-32.28 Y-22.172 I1.234 J1.136 E.07111 G1 X-31.625 Y-21.618 E.02846 G2 X-29.659 Y-21.244 I1.234 J-1.136 E.07111 G1 X-29.004 Y-21.798 E.02846 G3 X-27.038 Y-22.172 I1.234 J1.136 E.07111 G1 X-26.383 Y-21.618 E.02846 G2 X-24.418 Y-21.244 I1.234 J-1.136 E.07111 G1 X-23.763 Y-21.798 E.02846 G3 X-21.797 Y-22.172 I1.234 J1.136 E.07111 G2 X-20.713 Y-21.306 I6.532 J-7.061 E.04607 G1 X-20.713 Y-24.056 E.09125 G2 X-21.578 Y-24.737 I-5.136 J5.639 E.03654 G1 X-23.173 Y-24.737 E.05292 G1 X-23.763 Y-24.239 E.02559 G3 X-25.728 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-26.819 Y-24.737 I-6.572 J7.108 E.04637 G1 X-28.415 Y-24.737 E.05292 G1 X-29.004 Y-24.239 E.02559 G3 X-30.969 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-32.061 Y-24.737 I-6.572 J7.108 E.04637 G1 X-33.656 Y-24.737 E.05292 G1 X-34.245 Y-24.239 E.02559 G3 X-36.211 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-37.302 Y-24.737 I-6.572 J7.108 E.04637 G1 X-38.897 Y-24.737 E.05292 G1 X-39.487 Y-24.239 E.02559 G3 X-41.452 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-42.543 Y-24.737 I-6.572 J7.108 E.04637 G1 X-44.139 Y-24.737 E.05292 G1 X-44.728 Y-24.239 E.02559 G3 X-46.693 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-47.785 Y-24.737 I-6.572 J7.108 E.04637 G1 X-49.38 Y-24.737 E.05292 G1 X-49.969 Y-24.239 E.02559 G3 X-51.935 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-53.026 Y-24.737 I-6.572 J7.108 E.04637 G1 X-54.621 Y-24.737 E.05292 G1 X-55.21 Y-24.239 E.02559 G3 X-57.176 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-58.267 Y-24.737 I-6.572 J7.108 E.04637 G1 X-59.863 Y-24.737 E.05292 G1 X-60.452 Y-24.239 E.02559 G3 X-62.417 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-63.508 Y-24.737 I-6.572 J7.108 E.04637 G1 X-65.104 Y-24.737 E.05292 G1 X-65.693 Y-24.239 E.02559 G3 X-67.659 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-68.75 Y-24.737 I-6.572 J7.108 E.04637 G1 X-70.345 Y-24.737 E.05292 G1 X-70.934 Y-24.239 E.02559 G3 X-72.9 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-73.991 Y-24.737 I-6.572 J7.108 E.04637 G1 X-75.587 Y-24.737 E.05292 G1 X-76.176 Y-24.239 E.02559 G3 X-78.141 Y-23.865 I-1.234 J-1.136 E.07111 G2 X-79.232 Y-24.737 I-6.572 J7.108 E.04637 G1 X-80.828 Y-24.737 E.05292 G1 X-81.417 Y-24.239 E.02559 G3 X-83.382 Y-23.865 I-1.234 J-1.136 E.07111 G1 X-84.038 Y-24.419 E.02846 G3 X-84.187 Y-24.737 I.041 J-.213 E.01356 G1 X-82.768 Y-24.737 E.04708 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-84.187 Y-24.737 G1 X-84.187 Y-24.528 G1 X-84.038 Y-24.419 G1 X-83.895 Y-24.298 ;WIPE_END G1 X-86.39 Y-17.085 Z1.8 F30000 G1 X-89.931 Y-6.85 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.491326 G1 F15000 G1 X-89.931 Y-7.306 E.01666 G1 X-90.411 Y-7.517 E.01918 G1 X-90.471 Y-7.561 E.0027 G1 X-90.471 Y-7.06 E.01832 G1 X-89.968 Y-6.865 E.01971 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-90.471 Y-7.06 G1 X-90.471 Y-7.561 G1 X-90.411 Y-7.517 G1 X-89.931 Y-7.306 G1 X-89.931 Y-6.946 ;WIPE_END G1 X-85.635 Y-10.072 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.486036 G1 F15000 G1 X-85.766 Y-10.927 E.03126 G2 X-86.01 Y-11.52 I-3.59 J1.126 E.02319 G1 X-86.51 Y-11.52 E.01807 G1 X-86.179 Y-10.772 E.02955 G1 X-86.073 Y-10.029 E.02712 G1 X-86.169 Y-9.284 E.02712 G1 X-86.445 Y-8.587 E.02707 G3 X-86.936 Y-7.945 I-5.335 J-3.576 E.02919 G1 X-87.287 Y-7.676 E.01596 G1 X-86.589 Y-7.676 E.0252 G1 X-86.122 Y-8.275 E.02743 G1 X-85.846 Y-8.854 E.02314 G1 X-85.669 Y-9.547 E.02582 G1 X-85.638 Y-10.032 E.01754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.713 Y-5.399 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-89.713 Y-3.77 E.05401 G1 X-89.934 Y-3.931 E.00907 G1 X-90.687 Y-3.992 E.02505 G1 X-90.687 Y-1.387 E.08642 G1 X-89.934 Y-1.207 E.02568 G1 X-89.279 Y-.653 E.02846 G2 X-87.313 Y-.279 I1.234 J-1.136 E.07111 G1 X-86.658 Y-.833 E.02846 G3 X-84.693 Y-1.207 I1.234 J1.136 E.07111 G1 X-84.038 Y-.653 E.02846 G2 X-82.072 Y-.279 I1.234 J-1.136 E.07111 G1 X-81.417 Y-.833 E.02846 G3 X-79.451 Y-1.207 I1.234 J1.136 E.07111 G1 X-78.796 Y-.653 E.02846 G2 X-76.831 Y-.279 I1.234 J-1.136 E.07111 G1 X-76.176 Y-.833 E.02846 G3 X-74.21 Y-1.207 I1.234 J1.136 E.07111 G1 X-73.555 Y-.653 E.02846 G2 X-71.59 Y-.279 I1.234 J-1.136 E.07111 G1 X-70.934 Y-.833 E.02846 G3 X-68.969 Y-1.207 I1.234 J1.136 E.07111 G1 X-68.314 Y-.653 E.02846 G2 X-66.348 Y-.279 I1.234 J-1.136 E.07111 G1 X-65.693 Y-.833 E.02846 G3 X-63.728 Y-1.207 I1.234 J1.136 E.07111 G1 X-63.072 Y-.653 E.02846 G2 X-61.107 Y-.279 I1.234 J-1.136 E.07111 G1 X-60.452 Y-.833 E.02846 G3 X-58.486 Y-1.207 I1.234 J1.136 E.07111 G1 X-57.831 Y-.653 E.02846 G2 X-55.866 Y-.279 I1.234 J-1.136 E.07111 G1 X-55.21 Y-.833 E.02846 G3 X-53.245 Y-1.207 I1.234 J1.136 E.07111 G1 X-52.59 Y-.653 E.02846 G2 X-50.624 Y-.279 I1.234 J-1.136 E.07111 G1 X-49.969 Y-.833 E.02846 G3 X-48.004 Y-1.207 I1.234 J1.136 E.07111 G1 X-47.348 Y-.653 E.02846 G2 X-45.383 Y-.279 I1.234 J-1.136 E.07111 G1 X-44.728 Y-.833 E.02846 G3 X-42.762 Y-1.207 I1.234 J1.136 E.07111 G1 X-42.107 Y-.653 E.02846 G2 X-40.142 Y-.279 I1.234 J-1.136 E.07111 G1 X-39.487 Y-.833 E.02846 G3 X-37.521 Y-1.207 I1.234 J1.136 E.07111 G1 X-36.866 Y-.653 E.02846 G2 X-34.9 Y-.279 I1.234 J-1.136 E.07111 G1 X-34.245 Y-.833 E.02846 G3 X-32.28 Y-1.207 I1.234 J1.136 E.07111 G1 X-31.625 Y-.653 E.02846 G2 X-29.659 Y-.279 I1.234 J-1.136 E.07111 G1 X-29.004 Y-.833 E.02846 G3 X-27.038 Y-1.207 I1.234 J1.136 E.07111 G1 X-26.383 Y-.653 E.02846 G2 X-24.418 Y-.279 I1.234 J-1.136 E.07111 G1 X-23.763 Y-.833 E.02846 G3 X-21.797 Y-1.207 I1.234 J1.136 E.07111 G1 X-21.142 Y-.653 E.02846 G2 X-19.176 Y-.279 I1.234 J-1.136 E.07111 G1 X-18.521 Y-.833 E.02846 G3 X-16.556 Y-1.207 I1.234 J1.136 E.07111 G2 X-15.245 Y-.175 I7.786 J-8.543 E.05536 G1 X-14.59 Y-.085 E.02194 G1 X-14.213 Y-.197 E.01305 G1 X-14.213 Y-2.758 E.08495 G1 X-14.59 Y-2.706 E.01263 G1 X-15.187 Y-2.883 E.02064 G1 X-15.187 Y-5.409 E.0838 G2 X-14.213 Y-5.438 I.454 J-1.093 E.03331 G1 X-14.213 Y-6.69 E.04151 G3 X-14.53 Y-6.536 I-1.333 J-2.335 E.01168 G1 X-14.553 Y-6.528 E.00083 G1 X-14.969 Y-6.85 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.491348 G1 F15000 G1 X-14.429 Y-7.06 E.02117 G1 X-14.429 Y-7.561 E.01833 G1 X-14.969 Y-7.306 E.02183 G1 X-14.969 Y-6.89 E.0152 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.785 Y-8.28 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.485814 G1 F15000 G2 X-18.31 Y-7.676 I4.004 J-2.655 E.02776 G1 X-17.612 Y-7.676 E.0252 G1 X-18.004 Y-7.986 E.01806 G1 X-18.427 Y-8.537 E.02504 G1 X-18.721 Y-9.228 E.0271 G1 X-18.827 Y-9.971 E.0271 G1 X-18.736 Y-10.717 E.0271 G3 X-18.39 Y-11.52 I4.644 J1.524 E.03162 G1 X-18.89 Y-11.52 E.01806 G1 X-19.134 Y-10.928 E.02311 G2 X-19.265 Y-9.929 I3.431 J.959 E.03651 G1 X-19.171 Y-9.212 E.02609 G2 X-18.803 Y-8.316 I3.309 J-.837 E.03508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.697 Y-4.443 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-40.445 Y-5.431 I-.939 J-2.476 E.05373 G1 X-40.142 Y-5.521 E.01051 G3 X-38.831 Y-6.552 I7.785 J8.543 E.05536 G3 X-36.866 Y-5.894 I.478 J1.836 E.07274 G1 X-36.211 Y-5.417 E.02689 G2 X-34.245 Y-6.075 I.478 J-1.836 E.07274 G1 X-33.59 Y-6.552 E.02689 G3 X-31.625 Y-5.894 I.478 J1.836 E.07274 G1 X-30.969 Y-5.417 E.02689 G2 X-29.004 Y-6.075 I.478 J-1.836 E.07274 G1 X-28.349 Y-6.552 E.02689 G3 X-26.383 Y-5.894 I.478 J1.836 E.07274 G1 X-25.728 Y-5.417 E.02689 G2 X-23.763 Y-6.075 I.478 J-1.836 E.07274 G1 X-23.107 Y-6.552 E.02689 G3 X-21.142 Y-5.894 I.478 J1.836 E.07274 G1 X-20.487 Y-5.417 E.02689 G1 X-20.213 Y-5.379 E.00916 G1 X-20.213 Y-2.819 E.08493 G1 X-20.487 Y-2.9 E.00947 G2 X-21.797 Y-3.931 I-7.786 J8.543 E.05536 G2 X-23.763 Y-3.274 I-.478 J1.836 E.07274 G1 X-24.418 Y-2.796 E.02689 G3 X-26.383 Y-3.454 I-.478 J-1.836 E.07274 G1 X-27.038 Y-3.931 E.02689 G2 X-29.004 Y-3.274 I-.478 J1.836 E.07274 G1 X-29.659 Y-2.796 E.02689 G3 X-31.625 Y-3.454 I-.478 J-1.836 E.07274 G1 X-32.28 Y-3.931 E.02689 G2 X-34.245 Y-3.274 I-.478 J1.836 E.07274 G1 X-34.9 Y-2.796 E.02689 G3 X-36.866 Y-3.454 I-.478 J-1.836 E.07274 G1 X-37.521 Y-3.931 E.02689 G2 X-39.487 Y-3.274 I-.478 J1.836 E.07274 G1 X-40.142 Y-2.796 E.02689 G3 X-42.107 Y-3.454 I-.478 J-1.836 E.07274 G1 X-42.762 Y-3.931 E.02689 G2 X-44.728 Y-3.274 I-.478 J1.836 E.07274 G1 X-45.383 Y-2.796 E.02689 G3 X-47.348 Y-3.454 I-.478 J-1.836 E.07274 G1 X-48.004 Y-3.931 E.02689 G2 X-49.969 Y-3.274 I-.478 J1.836 E.07274 G1 X-50.624 Y-2.796 E.02689 G3 X-52.59 Y-3.454 I-.478 J-1.836 E.07274 G1 X-53.245 Y-3.931 E.02689 G2 X-55.21 Y-3.274 I-.478 J1.836 E.07274 G1 X-55.866 Y-2.796 E.02689 G3 X-57.831 Y-3.454 I-.478 J-1.836 E.07274 G1 X-58.486 Y-3.931 E.02689 G2 X-60.452 Y-3.274 I-.478 J1.836 E.07274 G1 X-61.107 Y-2.796 E.02689 G3 X-63.072 Y-3.454 I-.478 J-1.836 E.07274 G1 X-63.728 Y-3.931 E.02689 G2 X-65.693 Y-3.274 I-.478 J1.836 E.07274 G1 X-66.348 Y-2.796 E.02689 G3 X-68.314 Y-3.454 I-.478 J-1.836 E.07274 G1 X-68.969 Y-3.931 E.02689 G2 X-70.934 Y-3.274 I-.478 J1.836 E.07274 G1 X-71.59 Y-2.796 E.02689 G3 X-73.555 Y-3.454 I-.478 J-1.836 E.07274 G1 X-74.21 Y-3.931 E.02689 G2 X-76.176 Y-3.274 I-.478 J1.836 E.07274 G1 X-76.831 Y-2.796 E.02689 G3 X-78.796 Y-3.454 I-.478 J-1.836 E.07274 G1 X-79.451 Y-3.931 E.02689 G2 X-81.417 Y-3.274 I-.478 J1.836 E.07274 G1 X-82.072 Y-2.796 E.02689 G3 X-84.038 Y-3.454 I-.478 J-1.836 E.07274 G1 X-84.687 Y-3.927 E.02665 G1 X-84.687 Y-6.443 E.08347 G2 X-83.382 Y-5.417 I7.748 J-8.505 E.05511 G2 X-81.417 Y-6.075 I.478 J-1.836 E.07274 G1 X-80.762 Y-6.552 E.02689 G3 X-78.796 Y-5.894 I.478 J1.836 E.07274 G1 X-78.141 Y-5.417 E.02689 G2 X-76.176 Y-6.075 I.478 J-1.836 E.07274 G1 X-75.52 Y-6.552 E.02689 G3 X-73.555 Y-5.894 I.478 J1.836 E.07274 G1 X-72.9 Y-5.417 E.02689 G2 X-70.934 Y-6.075 I.478 J-1.836 E.07274 G1 X-70.279 Y-6.552 E.02689 G3 X-68.314 Y-5.894 I.478 J1.836 E.07274 G1 X-67.659 Y-5.417 E.02689 G2 X-65.693 Y-6.075 I.478 J-1.836 E.07274 G1 X-65.038 Y-6.552 E.02689 G1 X-64.809 Y-6.583 E.00765 G3 X-63.322 Y-8.877 I2.369 J-.093 E.09666 G1 X-63.728 Y-9.173 E.01665 G2 X-65.693 Y-8.515 I-.478 J1.836 E.07274 G1 X-66.348 Y-8.037 E.02689 G3 X-68.314 Y-8.695 I-.478 J-1.836 E.07274 G1 X-68.969 Y-9.173 E.02689 G2 X-70.934 Y-8.515 I-.478 J1.836 E.07274 G1 X-71.59 Y-8.037 E.02689 G3 X-73.555 Y-8.695 I-.478 J-1.836 E.07274 G1 X-74.21 Y-9.173 E.02689 G2 X-76.176 Y-8.515 I-.478 J1.836 E.07274 G1 X-76.831 Y-8.037 E.02689 G3 X-78.796 Y-8.695 I-.478 J-1.836 E.07274 G1 X-79.451 Y-9.173 E.02689 G2 X-81.417 Y-8.515 I-.478 J1.836 E.07274 G1 X-82.072 Y-8.037 E.02689 G3 X-84.038 Y-8.695 I-.478 J-1.836 E.07274 G1 X-84.693 Y-9.173 E.02689 G1 X-85.288 Y-9.254 E.01993 G2 X-85.64 Y-11.737 I-3.554 J-.763 E.08492 G1 X-84.693 Y-11.689 E.03145 G2 X-83.382 Y-10.658 I7.786 J-8.543 E.05536 G2 X-81.417 Y-11.316 I.478 J-1.836 E.07274 G1 X-80.762 Y-11.793 E.02689 G3 X-78.796 Y-11.135 I.478 J1.836 E.07274 G1 X-78.141 Y-10.658 E.02689 G2 X-76.176 Y-11.316 I.478 J-1.836 E.07274 G1 X-75.52 Y-11.793 E.02689 G3 X-73.555 Y-11.135 I.478 J1.836 E.07274 G1 X-72.9 Y-10.658 E.02689 G2 X-70.934 Y-11.316 I.478 J-1.836 E.07274 G1 X-70.279 Y-11.793 E.02689 G3 X-68.314 Y-11.135 I.478 J1.836 E.07274 G1 X-67.659 Y-10.658 E.02689 G2 X-65.693 Y-11.316 I.478 J-1.836 E.07274 G1 X-65.038 Y-11.793 E.02689 G3 X-63.072 Y-11.135 I.478 J1.836 E.07274 G1 X-62.417 Y-10.658 E.02689 G2 X-60.452 Y-11.316 I.478 J-1.836 E.07274 G1 X-59.797 Y-11.793 E.02689 G3 X-57.831 Y-11.135 I.478 J1.836 E.07274 G1 X-57.176 Y-10.658 E.02689 G2 X-55.21 Y-11.316 I.478 J-1.836 E.07274 G1 X-54.555 Y-11.793 E.02689 G3 X-52.59 Y-11.135 I.478 J1.836 E.07274 G1 X-51.935 Y-10.658 E.02689 G2 X-49.969 Y-11.316 I.478 J-1.836 E.07274 G1 X-49.314 Y-11.793 E.02689 G3 X-47.348 Y-11.135 I.478 J1.836 E.07274 G1 X-46.693 Y-10.658 E.02689 G2 X-44.728 Y-11.316 I.478 J-1.836 E.07274 G1 X-44.073 Y-11.793 E.02689 G3 X-42.107 Y-11.135 I.478 J1.836 E.07274 G1 X-41.452 Y-10.658 E.02689 G2 X-39.487 Y-11.316 I.478 J-1.836 E.07274 G1 X-38.831 Y-11.793 E.02689 G3 X-36.866 Y-11.135 I.478 J1.836 E.07274 G1 X-36.211 Y-10.658 E.02689 G2 X-34.245 Y-11.316 I.478 J-1.836 E.07274 G1 X-33.59 Y-11.793 E.02689 G3 X-31.625 Y-11.135 I.478 J1.836 E.07274 G1 X-30.969 Y-10.658 E.02689 G2 X-29.004 Y-11.316 I.478 J-1.836 E.07274 G1 X-28.349 Y-11.793 E.02689 G3 X-26.383 Y-11.135 I.478 J1.836 E.07274 G1 X-25.728 Y-10.658 E.02689 G2 X-23.763 Y-11.316 I.478 J-1.836 E.07274 G1 X-23.107 Y-11.793 E.02689 G3 X-21.142 Y-11.135 I.478 J1.836 E.07274 G1 X-20.487 Y-10.658 E.02689 G1 X-19.832 Y-10.568 E.02194 G1 X-19.636 Y-10.626 E.00677 G2 X-19.176 Y-8.037 I4.069 J.613 E.08877 G3 X-21.142 Y-8.695 I-.478 J-1.836 E.07274 G1 X-21.797 Y-9.173 E.02689 G2 X-23.763 Y-8.515 I-.478 J1.836 E.07274 G1 X-24.418 Y-8.037 E.02689 G3 X-26.383 Y-8.695 I-.478 J-1.836 E.07274 G1 X-27.038 Y-9.173 E.02689 G2 X-29.004 Y-8.515 I-.478 J1.836 E.07274 G1 X-29.659 Y-8.037 E.02689 G3 X-31.625 Y-8.695 I-.478 J-1.836 E.07274 G1 X-32.28 Y-9.173 E.02689 G2 X-34.245 Y-8.515 I-.478 J1.836 E.07274 G1 X-34.9 Y-8.037 E.02689 G3 X-36.866 Y-8.695 I-.478 J-1.836 E.07274 G1 X-37.521 Y-9.173 E.02689 G2 X-39.487 Y-8.515 I-.478 J1.836 E.07274 G1 X-40.142 Y-8.037 E.02689 G1 X-40.486 Y-7.99 E.01153 G2 X-42.577 Y-9.038 I-1.964 J1.311 E.08115 G1 X-42.762 Y-9.173 E.00761 G2 X-44.728 Y-8.515 I-.478 J1.836 E.07274 G1 X-45.383 Y-8.037 E.02689 G3 X-47.348 Y-8.695 I-.478 J-1.836 E.07274 G1 X-48.004 Y-9.173 E.02689 G2 X-49.969 Y-8.515 I-.478 J1.836 E.07274 G1 X-50.624 Y-8.037 E.02689 G3 X-52.59 Y-8.695 I-.478 J-1.836 E.07274 G1 X-53.245 Y-9.173 E.02689 G2 X-55.21 Y-8.515 I-.478 J1.836 E.07274 G1 X-55.866 Y-8.037 E.02689 G3 X-57.831 Y-8.695 I-.478 J-1.836 E.07274 G1 X-58.486 Y-9.173 E.02689 G2 X-60.452 Y-8.515 I-.478 J1.836 E.07274 G1 X-60.737 Y-8.307 E.0117 G3 X-60.115 Y-6.32 I-1.878 J1.679 E.0712 G1 X-59.797 Y-6.552 E.01305 G3 X-57.831 Y-5.894 I.478 J1.836 E.07274 G1 X-57.176 Y-5.417 E.02689 G2 X-55.21 Y-6.075 I.478 J-1.836 E.07274 G1 X-54.555 Y-6.552 E.02689 G3 X-52.59 Y-5.894 I.478 J1.836 E.07274 G1 X-51.935 Y-5.417 E.02689 G2 X-49.969 Y-6.075 I.478 J-1.836 E.07274 G1 X-49.314 Y-6.552 E.02689 G3 X-47.348 Y-5.894 I.478 J1.836 E.07274 G1 X-46.693 Y-5.417 E.02689 G2 X-44.735 Y-6.068 I.479 J-1.83 E.0724 G1 X-44.735 Y-6.068 E.00002 G2 X-43.823 Y-4.758 I2.582 J-.826 E.05373 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-44.327 Y-5.24 G1 X-44.504 Y-5.504 G1 X-44.735 Y-6.068 G1 X-44.735 Y-6.068 G1 X-45.022 Y-5.826 ;WIPE_END G1 X-42.496 Y1.377 Z1.8 F30000 G1 X-31.666 Y32.263 Z1.8 G1 Z1.4 G1 E.8 F1800 G1 F16200 G1 X-31.187 Y32.263 E.01589 G1 X-31.187 Y31.114 E.03812 G1 X-30.969 Y31.272 E.00893 G2 X-29.659 Y31.169 I.54 J-1.503 E.04494 M73 P17 R89 G1 X-29.004 Y30.615 E.02846 G3 X-27.038 Y30.241 I1.234 J1.136 E.07111 G1 X-26.383 Y30.795 E.02846 G2 X-24.418 Y31.169 I1.234 J-1.136 E.07111 G1 X-23.763 Y30.615 E.02846 G3 X-21.797 Y30.241 I1.234 J1.136 E.07111 G1 X-21.142 Y30.795 E.02846 G2 X-19.176 Y31.169 I1.234 J-1.136 E.07111 G1 X-18.521 Y30.615 E.02846 G3 X-16.556 Y30.241 I1.234 J1.136 E.07111 G2 X-15.245 Y31.272 I7.786 J-8.543 E.05536 G1 X-14.59 Y31.362 E.02194 G1 X-14.213 Y31.251 E.01305 G1 X-14.213 Y28.69 E.08495 G1 X-14.59 Y28.742 E.01263 G1 X-15.245 Y28.548 E.02266 G1 X-15.901 Y27.994 E.02846 G2 X-17.866 Y27.62 I-1.234 J1.136 E.07111 G1 X-18.521 Y28.174 E.02846 G3 X-20.487 Y28.548 I-1.234 J-1.136 E.07111 G1 X-21.142 Y27.994 E.02846 G2 X-23.107 Y27.62 I-1.234 J1.136 E.07111 G1 X-23.763 Y28.174 E.02846 G3 X-25.728 Y28.548 I-1.234 J-1.136 E.07111 G1 X-26.383 Y27.994 E.02846 G2 X-28.349 Y27.62 I-1.234 J1.136 E.07111 G1 X-29.004 Y28.174 E.02846 G3 X-30.969 Y28.548 I-1.234 J-1.136 E.07111 G1 X-31.187 Y28.364 E.00945 G1 X-31.187 Y25.873 E.08264 G1 X-30.969 Y26.031 E.00893 G2 X-29.659 Y25.927 I.54 J-1.503 E.04494 G1 X-29.004 Y25.373 E.02846 G3 X-27.038 Y25 I1.234 J1.136 E.07111 G1 X-26.383 Y25.554 E.02846 G2 X-24.418 Y25.927 I1.234 J-1.136 E.07111 G1 X-23.763 Y25.373 E.02846 G3 X-21.797 Y25 I1.234 J1.136 E.07111 G2 X-20.487 Y26.031 I7.786 J-8.543 E.05536 G1 X-20.213 Y26.069 E.00916 G1 X-20.213 Y23.388 E.08894 G1 X-20.487 Y23.307 E.00947 G1 X-21.142 Y22.753 E.02846 G2 X-23.107 Y22.379 I-1.234 J1.136 E.07111 G1 X-23.763 Y22.933 E.02846 G3 X-25.728 Y23.307 I-1.234 J-1.136 E.07111 G1 X-26.383 Y22.753 E.02846 G2 X-28.349 Y22.379 I-1.234 J1.136 E.07111 G1 X-29.004 Y22.933 E.02846 G3 X-30.969 Y23.307 I-1.234 J-1.136 E.07111 G1 X-31.187 Y23.123 E.00945 G1 X-31.187 Y20.631 E.08264 G1 X-30.969 Y20.79 E.00893 G2 X-29.659 Y20.686 I.54 J-1.503 E.04494 G1 X-29.004 Y20.132 E.02846 G3 X-27.038 Y19.758 I1.234 J1.136 E.07111 G1 X-26.383 Y20.312 E.02846 G2 X-24.418 Y20.686 I1.234 J-1.136 E.07111 G1 X-23.763 Y20.132 E.02846 G3 X-21.797 Y19.758 I1.234 J1.136 E.07111 G2 X-20.487 Y20.79 I7.786 J-8.543 E.05536 G1 X-20.213 Y20.827 E.00916 G1 X-20.213 Y19.737 E.03617 M73 P18 R89 G1 X-17.979 Y19.737 E.07411 G3 X-16.628 Y19.737 I.675 J1.511 E.04615 G1 X-15.187 Y19.737 E.04782 G1 X-15.187 Y20.798 E.03519 G2 X-14.213 Y20.768 I.454 J-1.093 E.03331 G1 X-14.213 Y18.207 E.08495 G1 X-14.59 Y18.259 E.01263 G1 X-15.245 Y18.065 E.02266 G1 X-15.901 Y17.511 E.02846 G2 X-17.866 Y17.138 I-1.234 J1.136 E.07111 G1 X-18.521 Y17.692 E.02846 G3 X-20.487 Y18.065 I-1.234 J-1.136 E.07111 G1 X-21.142 Y17.511 E.02846 G2 X-23.107 Y17.138 I-1.234 J1.136 E.07111 G1 X-23.763 Y17.692 E.02846 G3 X-25.728 Y18.065 I-1.234 J-1.136 E.07111 G1 X-26.383 Y17.511 E.02846 G2 X-28.349 Y17.138 I-1.234 J1.136 E.07111 G1 X-29.004 Y17.692 E.02846 G3 X-30.969 Y18.065 I-1.234 J-1.136 E.07111 G1 X-31.187 Y17.881 E.00945 G1 X-31.187 Y15.39 E.08264 G1 X-30.969 Y15.548 E.00893 G2 X-29.659 Y15.445 I.54 J-1.503 E.04494 G1 X-29.004 Y14.891 E.02846 G3 X-27.038 Y14.517 I1.234 J1.136 E.07111 G1 X-26.383 Y15.071 E.02846 G2 X-24.418 Y15.445 I1.234 J-1.136 E.07111 G1 X-23.763 Y14.891 E.02846 G3 X-21.797 Y14.517 I1.234 J1.136 E.07111 G1 X-21.142 Y15.071 E.02846 G2 X-19.176 Y15.445 I1.234 J-1.136 E.07111 G1 X-18.521 Y14.891 E.02846 G3 X-16.556 Y14.517 I1.234 J1.136 E.07111 G2 X-15.245 Y15.548 I7.786 J-8.543 E.05536 G1 X-14.59 Y15.638 E.02194 G1 X-14.213 Y15.527 E.01305 G1 X-14.213 Y12.966 E.08495 G1 X-14.59 Y13.018 E.01263 G1 X-15.245 Y12.824 E.02266 G1 X-15.901 Y12.27 E.02846 G2 X-17.866 Y11.896 I-1.234 J1.136 E.07111 G1 X-18.521 Y12.45 E.02846 G3 X-20.487 Y12.824 I-1.234 J-1.136 E.07111 G1 X-21.142 Y12.27 E.02846 G2 X-23.107 Y11.896 I-1.234 J1.136 E.07111 G1 X-23.763 Y12.45 E.02846 G3 X-25.728 Y12.824 I-1.234 J-1.136 E.07111 G1 X-26.383 Y12.27 E.02846 G2 X-28.349 Y11.896 I-1.234 J1.136 E.07111 G1 X-29.004 Y12.45 E.02846 G3 X-30.969 Y12.824 I-1.234 J-1.136 E.07111 G1 X-31.187 Y12.64 E.00945 G1 X-31.187 Y10.149 E.08264 G1 X-30.969 Y10.307 E.00893 G2 X-29.659 Y10.203 I.54 J-1.503 E.04494 G1 X-29.004 Y9.649 E.02846 G3 X-27.038 Y9.276 I1.234 J1.136 E.07111 G1 X-26.383 Y9.83 E.02846 G2 X-24.418 Y10.203 I1.234 J-1.136 E.07111 G1 X-23.763 Y9.649 E.02846 G3 X-21.797 Y9.276 I1.234 J1.136 E.07111 G1 X-21.142 Y9.83 E.02846 G2 X-19.176 Y10.203 I1.234 J-1.136 E.07111 G1 X-18.521 Y9.649 E.02846 G3 X-16.556 Y9.276 I1.234 J1.136 E.07111 G2 X-15.245 Y10.307 I7.786 J-8.543 E.05536 G1 X-14.59 Y10.397 E.02194 G1 X-14.213 Y10.286 E.01305 G1 X-14.213 Y7.725 E.08495 G1 X-14.59 Y7.776 E.01263 G1 X-15.245 Y7.583 E.02266 G1 X-15.901 Y7.029 E.02846 G2 X-17.866 Y6.655 I-1.234 J1.136 E.07111 G1 X-18.521 Y7.209 E.02846 G3 X-20.487 Y7.583 I-1.234 J-1.136 E.07111 G1 X-21.142 Y7.029 E.02846 G2 X-23.107 Y6.655 I-1.234 J1.136 E.07111 G1 X-23.763 Y7.209 E.02846 G3 X-25.728 Y7.583 I-1.234 J-1.136 E.07111 G1 X-26.383 Y7.029 E.02846 G2 X-28.349 Y6.655 I-1.234 J1.136 E.07111 G1 X-29.004 Y7.209 E.02846 G3 X-30.969 Y7.583 I-1.234 J-1.136 E.07111 G1 X-31.625 Y7.029 E.02846 G2 X-33.59 Y6.655 I-1.234 J1.136 E.07111 G1 X-34.245 Y7.209 E.02846 G3 X-36.211 Y7.583 I-1.235 J-1.139 E.07109 G1 X-36.866 Y7.029 E.02846 G2 X-38.831 Y6.655 I-1.234 J1.136 E.07111 G1 X-39.487 Y7.209 E.02846 G3 X-41.452 Y7.583 I-1.235 J-1.139 E.07109 G1 X-42.107 Y7.029 E.02846 G2 X-44.073 Y6.655 I-1.234 J1.136 E.07111 G1 X-44.728 Y7.209 E.02846 G3 X-46.693 Y7.583 I-1.235 J-1.139 E.07109 G1 X-47.348 Y7.029 E.02846 G2 X-49.314 Y6.655 I-1.234 J1.136 E.07111 G1 X-49.969 Y7.209 E.02846 G3 X-51.935 Y7.583 I-1.235 J-1.139 E.07109 G1 X-52.59 Y7.029 E.02846 G2 X-54.555 Y6.655 I-1.234 J1.136 E.07111 G1 X-55.21 Y7.209 E.02846 G3 X-57.176 Y7.583 I-1.235 J-1.139 E.07109 G1 X-57.831 Y7.029 E.02846 G2 X-59.797 Y6.655 I-1.234 J1.136 E.07111 G1 X-60.452 Y7.209 E.02846 G3 X-62.417 Y7.583 I-1.235 J-1.139 E.07109 G1 X-63.072 Y7.029 E.02846 G2 X-65.038 Y6.655 I-1.234 J1.136 E.07111 G1 X-65.693 Y7.209 E.02846 G3 X-67.659 Y7.583 I-1.235 J-1.139 E.07109 G1 X-68.314 Y7.029 E.02846 G2 X-70.279 Y6.655 I-1.234 J1.136 E.07111 G1 X-70.934 Y7.209 E.02846 G3 X-72.9 Y7.583 I-1.235 J-1.139 E.07109 G1 X-73.555 Y7.029 E.02846 G2 X-75.52 Y6.655 I-1.234 J1.136 E.07111 G1 X-76.176 Y7.209 E.02846 G3 X-78.141 Y7.583 I-1.234 J-1.136 E.07111 G1 X-78.796 Y7.029 E.02846 G2 X-80.762 Y6.655 I-1.234 J1.136 E.07111 G1 X-81.417 Y7.209 E.02846 G3 X-83.382 Y7.583 I-1.234 J-1.136 E.07111 G1 X-84.038 Y7.029 E.02846 G2 X-86.003 Y6.655 I-1.234 J1.136 E.07111 G1 X-86.658 Y7.209 E.02846 G3 X-88.624 Y7.583 I-1.234 J-1.136 E.07111 G2 X-89.934 Y6.551 I-7.785 J8.543 E.05536 G1 X-90.687 Y6.49 E.02505 G1 X-90.687 Y9.095 E.08642 G1 X-89.934 Y9.276 E.02568 G1 X-89.279 Y9.83 E.02846 G2 X-87.313 Y10.203 I1.234 J-1.136 E.07111 G1 X-86.658 Y9.649 E.02846 G3 X-84.693 Y9.276 I1.234 J1.136 E.07111 G1 X-84.038 Y9.83 E.02846 G2 X-82.072 Y10.203 I1.234 J-1.136 E.07111 G1 X-81.417 Y9.649 E.02846 G3 X-79.451 Y9.276 I1.234 J1.136 E.07111 G1 X-78.796 Y9.83 E.02846 G2 X-76.831 Y10.203 I1.234 J-1.136 E.07111 G3 X-75.52 Y9.172 I7.786 J8.543 E.05536 G3 X-73.713 Y9.696 I.479 J1.726 E.06572 G1 X-73.713 Y12.155 E.08156 G2 X-75.52 Y11.896 I-1.07 J1.031 E.06522 G1 X-76.176 Y12.45 E.02846 G3 X-78.141 Y12.824 I-1.234 J-1.136 E.07111 G1 X-78.796 Y12.27 E.02846 G2 X-80.762 Y11.896 I-1.234 J1.136 E.07111 G1 X-81.417 Y12.45 E.02846 G3 X-83.382 Y12.824 I-1.234 J-1.136 E.07111 G1 X-84.038 Y12.27 E.02846 G2 X-86.003 Y11.896 I-1.234 J1.136 E.07111 G1 X-86.658 Y12.45 E.02846 G3 X-88.624 Y12.824 I-1.234 J-1.136 E.07111 G2 X-89.934 Y11.793 I-7.785 J8.543 E.05536 G1 X-90.687 Y11.732 E.02505 G1 X-90.687 Y14.337 E.08642 G1 X-89.934 Y14.517 E.02568 G1 X-89.279 Y15.071 E.02846 G2 X-87.313 Y15.445 I1.234 J-1.136 E.07111 G1 X-86.658 Y14.891 E.02846 G3 X-84.693 Y14.517 I1.234 J1.136 E.07111 G1 X-84.038 Y15.071 E.02846 G2 X-82.072 Y15.445 I1.234 J-1.136 E.07111 G1 X-81.417 Y14.891 E.02846 G3 X-79.451 Y14.517 I1.234 J1.136 E.07111 G1 X-78.796 Y15.071 E.02846 G2 X-76.831 Y15.445 I1.234 J-1.136 E.07111 G3 X-75.52 Y14.413 I7.786 J8.543 E.05536 G3 X-73.713 Y14.937 I.479 J1.726 E.06572 G1 X-73.713 Y17.396 E.08156 G2 X-75.52 Y17.138 I-1.07 J1.031 E.06522 G1 X-76.176 Y17.692 E.02846 G3 X-78.141 Y18.065 I-1.234 J-1.136 E.07111 G1 X-78.796 Y17.511 E.02846 G2 X-80.762 Y17.138 I-1.234 J1.136 E.07111 G1 X-81.417 Y17.692 E.02846 G3 X-83.382 Y18.065 I-1.234 J-1.136 E.07111 G1 X-84.038 Y17.511 E.02846 G2 X-86.003 Y17.138 I-1.234 J1.136 E.07111 G1 X-86.658 Y17.692 E.02846 G3 X-88.624 Y18.065 I-1.234 J-1.136 E.07111 G2 X-89.934 Y17.034 I-7.786 J8.543 E.05536 G1 X-90.687 Y16.973 E.02505 G1 X-90.687 Y19.578 E.08642 G1 X-89.934 Y19.758 E.02568 G1 X-89.713 Y19.945 E.0096 G1 X-89.713 Y22.436 E.08263 G1 X-89.934 Y22.275 E.00907 G1 X-90.687 Y22.214 E.02505 G1 X-90.687 Y24.819 E.08642 G1 X-89.934 Y25 E.02568 G1 X-89.713 Y25.187 E.0096 G1 X-89.713 Y26.263 E.03571 G1 X-89.161 Y26.263 E.0183 G1 X-90.687 Y31.068 F30000 G1 F16200 G1 X-90.687 Y32.697 E.05401 G1 X-89.934 Y32.758 E.02505 G3 X-88.624 Y33.789 I-6.475 J9.575 E.05536 G2 X-86.658 Y33.416 I.731 J-1.51 E.07111 G1 X-86.003 Y32.862 E.02846 G3 X-84.038 Y33.235 I.731 J1.51 E.07111 G1 X-83.382 Y33.789 E.02846 G2 X-81.417 Y33.416 I.731 J-1.51 E.07111 G1 X-80.762 Y32.862 E.02846 G3 X-78.796 Y33.235 I.731 J1.51 E.07111 G1 X-78.141 Y33.789 E.02846 G2 X-76.176 Y33.416 I.731 J-1.51 E.07111 G1 X-75.52 Y32.862 E.02846 G3 X-73.555 Y33.235 I.731 J1.51 E.07111 G1 X-72.9 Y33.789 E.02846 G2 X-70.934 Y33.416 I.731 J-1.51 E.07111 G1 X-70.279 Y32.862 E.02846 G3 X-68.314 Y33.235 I.731 J1.51 E.07111 G1 X-67.659 Y33.789 E.02846 G2 X-65.693 Y33.416 I.731 J-1.51 E.07111 G1 X-65.038 Y32.862 E.02846 G3 X-63.072 Y33.235 I.731 J1.51 E.07111 G1 X-62.417 Y33.789 E.02846 G2 X-60.452 Y33.416 I.731 J-1.51 E.07111 G1 X-59.797 Y32.862 E.02846 G3 X-57.831 Y33.235 I.731 J1.51 E.07111 G1 X-57.176 Y33.789 E.02846 G2 X-55.21 Y33.416 I.731 J-1.51 E.07111 G1 X-54.555 Y32.862 E.02846 G3 X-52.59 Y33.235 I.731 J1.51 E.07111 G1 X-51.935 Y33.789 E.02846 G2 X-49.969 Y33.416 I.731 J-1.51 E.07111 G1 X-49.314 Y32.862 E.02846 G3 X-47.348 Y33.235 I.731 J1.51 E.07111 G1 X-46.693 Y33.789 E.02846 G2 X-44.728 Y33.416 I.731 J-1.51 E.07111 G1 X-44.073 Y32.862 E.02846 G3 X-42.107 Y33.235 I.731 J1.51 E.07111 G1 X-41.452 Y33.789 E.02846 G2 X-39.487 Y33.416 I.731 J-1.51 E.07111 G1 X-38.831 Y32.862 E.02846 G3 X-36.866 Y33.235 I.731 J1.51 E.07111 G1 X-36.211 Y33.789 E.02846 G2 X-34.245 Y33.416 I.731 J-1.51 E.07111 G1 X-33.59 Y32.862 E.02846 G3 X-31.625 Y33.235 I.731 J1.51 E.07111 G1 X-30.969 Y33.789 E.02846 G2 X-29.004 Y33.416 I.731 J-1.51 E.07111 G1 X-28.349 Y32.862 E.02846 G3 X-26.383 Y33.235 I.731 J1.51 E.07111 G1 X-25.728 Y33.789 E.02846 G2 X-23.763 Y33.416 I.731 J-1.51 E.07111 G1 X-23.107 Y32.862 E.02846 G3 X-21.142 Y33.235 I.731 J1.51 E.07111 G1 X-20.487 Y33.789 E.02846 G2 X-18.521 Y33.416 I.731 J-1.51 E.07111 G1 X-17.866 Y32.862 E.02846 G3 X-15.901 Y33.235 I.731 J1.51 E.07111 G1 X-15.245 Y33.789 E.02846 G1 X-14.59 Y33.983 E.02266 G1 X-14.213 Y33.931 E.01263 G1 X-14.213 Y36.492 E.08495 G1 X-14.59 Y36.604 E.01305 G1 X-15.245 Y36.514 E.02194 G3 X-16.556 Y35.482 I6.475 J-9.575 E.05536 G2 X-18.521 Y35.856 I-.731 J1.51 E.07111 G1 X-19.176 Y36.41 E.02846 G3 X-21.142 Y36.036 I-.731 J-1.51 E.07111 G1 X-21.797 Y35.482 E.02846 G2 X-23.763 Y35.856 I-.731 J1.51 E.07111 G1 X-24.418 Y36.41 E.02846 G3 X-26.383 Y36.036 I-.731 J-1.51 E.07111 G1 X-27.038 Y35.482 E.02846 G2 X-29.004 Y35.856 I-.731 J1.51 E.07111 G1 X-29.659 Y36.41 E.02846 G3 X-31.625 Y36.036 I-.731 J-1.51 E.07111 G1 X-32.28 Y35.482 E.02846 G2 X-34.245 Y35.856 I-.731 J1.51 E.07111 G1 X-34.9 Y36.41 E.02846 G3 X-36.866 Y36.036 I-.731 J-1.51 E.07111 G1 X-37.521 Y35.482 E.02846 G2 X-39.487 Y35.856 I-.731 J1.51 E.07111 G1 X-40.142 Y36.41 E.02846 G3 X-42.107 Y36.036 I-.731 J-1.51 E.07111 G1 X-42.762 Y35.482 E.02846 G2 X-44.728 Y35.856 I-.731 J1.51 E.07111 G1 X-45.383 Y36.41 E.02846 G3 X-47.348 Y36.036 I-.731 J-1.51 E.07111 G1 X-48.004 Y35.482 E.02846 G2 X-49.969 Y35.856 I-.731 J1.51 E.07111 G1 X-50.624 Y36.41 E.02846 G3 X-52.59 Y36.036 I-.731 J-1.51 E.07111 G1 X-53.245 Y35.482 E.02846 G2 X-55.21 Y35.856 I-.731 J1.51 E.07111 G1 X-55.866 Y36.41 E.02846 G3 X-57.831 Y36.036 I-.731 J-1.51 E.07111 G1 X-58.486 Y35.482 E.02846 G2 X-60.452 Y35.856 I-.731 J1.51 E.07111 G1 X-61.107 Y36.41 E.02846 G3 X-63.072 Y36.036 I-.731 J-1.51 E.07111 G1 X-63.728 Y35.482 E.02846 G2 X-65.693 Y35.856 I-.731 J1.51 E.07111 G1 X-66.348 Y36.41 E.02846 G3 X-68.314 Y36.036 I-.731 J-1.51 E.07111 G1 X-68.969 Y35.482 E.02846 G2 X-70.934 Y35.856 I-.731 J1.51 E.07111 G1 X-71.59 Y36.41 E.02846 G3 X-73.555 Y36.036 I-.731 J-1.51 E.07111 G1 X-74.21 Y35.482 E.02846 G2 X-76.176 Y35.856 I-.731 J1.51 E.07111 G1 X-76.831 Y36.41 E.02846 G3 X-78.796 Y36.036 I-.731 J-1.51 E.07111 G1 X-79.451 Y35.482 E.02846 G2 X-81.417 Y35.856 I-.731 J1.51 E.07111 G1 X-82.072 Y36.41 E.02846 G3 X-84.038 Y36.036 I-.731 J-1.51 E.07111 G1 X-84.693 Y35.482 E.02846 G2 X-86.658 Y35.856 I-.731 J1.51 E.07111 G1 X-87.313 Y36.41 E.02846 G3 X-89.279 Y36.036 I-.731 J-1.51 E.07111 G1 X-89.934 Y35.482 E.02846 G1 X-90.687 Y35.302 E.02568 G1 X-90.687 Y36.93 E.05401 G1 X-84.602 Y46.661 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.487546 G1 F15000 G1 X-84.995 Y46.326 E.01873 G1 X-85.529 Y46.01 E.02248 G1 X-86.072 Y45.806 E.02102 G1 X-86.588 Y45.704 E.01905 G1 X-87.311 Y45.704 E.02619 G2 X-88.283 Y45.966 I.412 J3.461 E.03659 G1 X-88.911 Y46.326 E.02623 G2 X-89.875 Y47.427 I2.446 J3.113 E.05335 ;WIDTH:0.480888 G1 X-89.965 Y47.448 E.0033 ;WIDTH:0.42037 G3 X-90.229 Y47.464 I-.165 J-.511 E.00822 G1 X-90.506 Y47.367 E.00902 G1 X-90.506 Y49.556 E.06732 G1 X-89.733 Y49.556 E.02377 G3 X-89.774 Y48.653 I3.983 J-.634 E.02786 G1 X-89.616 Y48.038 E.01952 ;WIDTH:0.440296 G1 X-89.558 Y47.864 E.00596 ;WIDTH:0.484134 G1 X-89.501 Y47.689 E.00661 G1 X-89.242 Y47.259 E.01804 G1 X-88.724 Y46.735 E.02648 G1 X-88.077 Y46.354 E.027 G1 X-87.354 Y46.152 E.027 G1 X-86.603 Y46.144 E.027 G1 X-85.876 Y46.334 E.027 G1 X-85.222 Y46.701 E.02697 G1 X-84.685 Y47.226 E.02699 G1 X-84.351 Y47.787 E.02347 G3 X-84.094 Y48.653 I-3.926 J1.637 E.03255 G1 X-84.098 Y49.311 E.02366 G1 X-84.132 Y49.528 E.00789 G1 X-83.688 Y49.528 E.01596 G2 X-83.756 Y48.122 I-3.266 J-.546 E.05099 G1 X-83.952 Y47.597 E.02015 G1 X-84.273 Y47.05 E.0228 G1 X-84.576 Y46.692 E.01687 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.273 Y47.05 G1 X-83.952 Y47.597 G1 X-83.756 Y48.122 G1 X-83.686 Y48.451 ;WIPE_END G1 X-90.14 Y49.19 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397568 G1 F15000 G1 X-90.14 Y48.653 E.01552 ;WIDTH:0.419253 G1 X-90.119 Y48.48 E.00534 ;WIDTH:0.462622 G1 X-90.099 Y48.307 E.00596 ;WIDTH:0.505991 G1 X-90.078 Y48.134 E.00657 ;WIDTH:0.527675 G1 X-90.058 Y47.961 E.00688 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-90.078 Y48.134 ;WIPE_END G1 X-83.363 Y47.942 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G3 X-83.25 Y49.552 I-3.79 J1.076 E.05395 G2 X-81.417 Y49.14 I.625 J-1.499 E.06645 G1 X-80.762 Y48.586 E.02846 G3 X-78.796 Y48.959 I.731 J1.51 E.07111 G1 X-78.141 Y49.513 E.02846 G2 X-76.176 Y49.14 I.731 J-1.51 E.07111 G1 X-75.52 Y48.586 E.02846 G3 X-73.555 Y48.959 I.731 J1.51 E.07111 G1 X-72.9 Y49.513 E.02846 G2 X-70.934 Y49.14 I.731 J-1.51 E.07111 G1 X-70.279 Y48.586 E.02846 G3 X-68.314 Y48.959 I.731 J1.51 E.07111 G1 X-67.659 Y49.513 E.02846 G2 X-65.693 Y49.14 I.731 J-1.51 E.07111 G1 X-65.038 Y48.586 E.02846 G3 X-63.072 Y48.959 I.731 J1.51 E.07111 G1 X-62.417 Y49.513 E.02846 G2 X-60.452 Y49.14 I.731 J-1.51 E.07111 G1 X-59.797 Y48.586 E.02846 G3 X-57.831 Y48.959 I.731 J1.51 E.07111 G1 X-57.176 Y49.513 E.02846 G2 X-55.21 Y49.14 I.731 J-1.51 E.07111 G1 X-54.555 Y48.586 E.02846 G3 X-52.59 Y48.959 I.731 J1.51 E.07111 G1 X-51.935 Y49.513 E.02846 G2 X-49.969 Y49.14 I.731 J-1.51 E.07111 G1 X-49.314 Y48.586 E.02846 G3 X-47.348 Y48.959 I.731 J1.51 E.07111 G1 X-46.693 Y49.513 E.02846 G2 X-44.728 Y49.14 I.731 J-1.51 E.07111 G1 X-44.073 Y48.586 E.02846 G3 X-42.107 Y48.959 I.731 J1.51 E.07111 G1 X-41.452 Y49.513 E.02846 G2 X-39.487 Y49.14 I.731 J-1.51 E.07111 G1 X-38.831 Y48.586 E.02846 G3 X-36.866 Y48.959 I.731 J1.51 E.07111 G1 X-36.211 Y49.513 E.02846 G2 X-34.245 Y49.14 I.731 J-1.51 E.07111 G1 X-33.59 Y48.586 E.02846 G3 X-31.625 Y48.959 I.731 J1.51 E.07111 G1 X-30.969 Y49.513 E.02846 G2 X-29.004 Y49.14 I.731 J-1.51 E.07111 G1 X-28.349 Y48.586 E.02846 G3 X-26.383 Y48.959 I.731 J1.51 E.07111 G1 X-25.728 Y49.513 E.02846 G2 X-23.763 Y49.14 I.731 J-1.51 E.07111 G1 X-23.107 Y48.586 E.02846 G3 X-21.667 Y48.576 I.73 J1.5 E.04939 G1 X-21.664 Y48.525 E.00172 G3 X-20.9 Y46.695 I3.927 J.567 E.06647 G3 X-21.797 Y45.965 I4.602 J-6.57 E.03842 G2 X-23.763 Y46.338 I-.731 J1.51 E.07111 G1 X-24.418 Y46.892 E.02846 G3 X-26.383 Y46.519 I-.731 J-1.51 E.07111 G1 X-27.038 Y45.965 E.02846 G2 X-29.004 Y46.338 I-.731 J1.51 E.07111 G1 X-29.659 Y46.892 E.02846 G3 X-31.625 Y46.519 I-.731 J-1.51 E.07111 G1 X-32.28 Y45.965 E.02846 G2 X-34.245 Y46.338 I-.731 J1.51 E.07111 G1 X-34.9 Y46.892 E.02846 G3 X-36.866 Y46.519 I-.731 J-1.51 E.07111 G1 X-37.521 Y45.965 E.02846 G2 X-39.487 Y46.338 I-.731 J1.51 E.07111 G1 X-40.142 Y46.892 E.02846 G3 X-42.107 Y46.519 I-.731 J-1.51 E.07111 G1 X-42.762 Y45.965 E.02846 G2 X-44.728 Y46.338 I-.731 J1.51 E.07111 G1 X-45.383 Y46.892 E.02846 G3 X-47.348 Y46.519 I-.731 J-1.51 E.07111 G1 X-48.004 Y45.965 E.02846 G2 X-49.969 Y46.338 I-.731 J1.51 E.07111 G1 X-50.624 Y46.892 E.02846 G3 X-52.59 Y46.519 I-.731 J-1.51 E.07111 G1 X-53.245 Y45.965 E.02846 G2 X-55.21 Y46.338 I-.731 J1.51 E.07111 G1 X-55.866 Y46.892 E.02846 G3 X-57.831 Y46.519 I-.731 J-1.51 E.07111 G1 X-58.486 Y45.965 E.02846 G2 X-60.452 Y46.338 I-.731 J1.51 E.07111 G1 X-61.107 Y46.892 E.02846 G3 X-63.072 Y46.519 I-.731 J-1.51 E.07111 G1 X-63.728 Y45.965 E.02846 G2 X-65.693 Y46.338 I-.731 J1.51 E.07111 G1 X-66.348 Y46.892 E.02846 G3 X-68.314 Y46.519 I-.731 J-1.51 E.07111 G1 X-68.969 Y45.965 E.02846 G2 X-70.934 Y46.338 I-.731 J1.51 E.07111 G1 X-71.59 Y46.892 E.02846 G3 X-73.555 Y46.519 I-.731 J-1.51 E.07111 G1 X-74.21 Y45.965 E.02846 G2 X-76.176 Y46.338 I-.731 J1.51 E.07111 G1 X-76.831 Y46.892 E.02846 G3 X-78.796 Y46.519 I-.731 J-1.51 E.07111 G1 X-79.451 Y45.965 E.02846 G2 X-81.417 Y46.338 I-.731 J1.51 E.07111 G1 X-82.072 Y46.892 E.02846 G3 X-84.038 Y46.519 I-.731 J-1.51 E.07111 G1 X-84.693 Y45.965 E.02846 G2 X-88.344 Y45.526 I-2.246 J3.285 E.12679 G1 X-88.37 Y45.536 E.00094 G2 X-89.539 Y46.299 I1.642 J3.786 E.04652 G1 X-89.934 Y45.965 E.01718 G1 X-90.687 Y45.785 E.02568 G1 X-90.687 Y43.179 E.08642 G1 X-89.934 Y43.24 E.02505 G3 X-88.624 Y44.272 I-6.475 J9.574 E.05536 G2 X-86.658 Y43.898 I.731 J-1.51 E.07111 G1 X-86.003 Y43.344 E.02846 G3 X-84.038 Y43.718 I.731 J1.51 E.07111 G1 X-83.382 Y44.272 E.02846 G2 X-81.417 Y43.898 I.731 J-1.51 E.07111 G1 X-80.762 Y43.344 E.02846 G3 X-78.796 Y43.718 I.731 J1.51 E.07111 G1 X-78.141 Y44.272 E.02846 G2 X-76.176 Y43.898 I.731 J-1.51 E.07111 G1 X-75.52 Y43.344 E.02846 G1 X-74.805 Y43.159 E.02451 G3 X-73.589 Y41.249 I2.365 J.165 E.0783 G1 X-74.21 Y40.724 E.027 G2 X-76.176 Y41.097 I-.731 J1.51 E.07111 G1 X-76.831 Y41.651 E.02846 G3 X-78.796 Y41.278 I-.731 J-1.51 E.07111 G1 X-79.451 Y40.724 E.02846 G2 X-81.417 Y41.097 I-.731 J1.51 E.07111 G1 X-82.072 Y41.651 E.02846 G3 X-84.038 Y41.278 I-.731 J-1.51 E.07111 G1 X-84.693 Y40.724 E.02846 G2 X-86.658 Y41.097 I-.731 J1.51 E.07111 G1 X-87.313 Y41.651 E.02846 G3 X-89.279 Y41.278 I-.731 J-1.51 E.07111 G1 X-89.934 Y40.724 E.02846 G1 X-90.687 Y40.543 E.02568 G1 X-90.687 Y37.938 E.08642 G1 X-89.934 Y37.999 E.02505 G3 X-88.624 Y39.031 I-6.475 J9.574 E.05536 G2 X-86.658 Y38.657 I.731 J-1.51 E.07111 G1 X-86.003 Y38.103 E.02846 G3 X-84.038 Y38.477 I.731 J1.51 E.07111 G1 X-83.382 Y39.031 E.02846 G2 X-81.417 Y38.657 I.731 J-1.51 E.07111 G1 X-80.762 Y38.103 E.02846 G3 X-78.796 Y38.477 I.731 J1.51 E.07111 G1 X-78.141 Y39.031 E.02846 G2 X-76.176 Y38.657 I.731 J-1.51 E.07111 G1 X-75.52 Y38.103 E.02846 G3 X-73.555 Y38.477 I.731 J1.51 E.07111 G1 X-72.9 Y39.031 E.02846 G2 X-70.934 Y38.657 I.731 J-1.51 E.07111 G1 X-70.279 Y38.103 E.02846 G3 X-68.314 Y38.477 I.731 J1.51 E.07111 G1 X-67.659 Y39.031 E.02846 G2 X-65.693 Y38.657 I.731 J-1.51 E.07111 G1 X-65.038 Y38.103 E.02846 G3 X-63.072 Y38.477 I.731 J1.51 E.07111 G1 X-62.417 Y39.031 E.02846 G2 X-60.452 Y38.657 I.731 J-1.51 E.07111 G1 X-59.797 Y38.103 E.02846 G3 X-57.831 Y38.477 I.731 J1.51 E.07111 G1 X-57.176 Y39.031 E.02846 G2 X-55.21 Y38.657 I.731 J-1.51 E.07111 G1 X-54.555 Y38.103 E.02846 G3 X-52.59 Y38.477 I.731 J1.51 E.07111 G1 X-51.935 Y39.031 E.02846 G2 X-49.969 Y38.657 I.731 J-1.51 E.07111 G1 X-49.314 Y38.103 E.02846 G3 X-47.348 Y38.477 I.731 J1.51 E.07111 G1 X-46.693 Y39.031 E.02846 G2 X-44.728 Y38.657 I.731 J-1.51 E.07111 G1 X-44.073 Y38.103 E.02846 G3 X-42.107 Y38.477 I.731 J1.51 E.07111 G1 X-41.452 Y39.031 E.02846 G2 X-39.487 Y38.657 I.731 J-1.51 E.07111 G1 X-38.831 Y38.103 E.02846 G3 X-36.866 Y38.477 I.731 J1.51 E.07111 G1 X-36.211 Y39.031 E.02846 G2 X-34.245 Y38.657 I.731 J-1.51 E.07111 G1 X-33.59 Y38.103 E.02846 G3 X-31.625 Y38.477 I.731 J1.51 E.07111 G1 X-30.969 Y39.031 E.02846 G2 X-29.004 Y38.657 I.731 J-1.51 E.07111 G1 X-28.349 Y38.103 E.02846 G3 X-26.383 Y38.477 I.731 J1.51 E.07111 G1 X-25.728 Y39.031 E.02846 G2 X-23.763 Y38.657 I.731 J-1.51 E.07111 G1 X-23.107 Y38.103 E.02846 G3 X-21.142 Y38.477 I.731 J1.51 E.07111 G1 X-20.487 Y39.031 E.02846 G2 X-18.521 Y38.657 I.731 J-1.51 E.07111 G1 X-17.866 Y38.103 E.02846 G3 X-15.901 Y38.477 I.731 J1.51 E.07111 G1 X-15.245 Y39.031 E.02846 G1 X-14.59 Y39.224 E.02266 G1 X-14.213 Y39.173 E.01263 G1 X-14.213 Y41.733 E.08495 G1 X-14.59 Y41.845 E.01305 G1 X-15.245 Y41.755 E.02194 G3 X-16.556 Y40.724 I6.475 J-9.574 E.05536 G2 X-18.521 Y41.097 I-.731 J1.51 E.07111 G1 X-19.176 Y41.651 E.02846 G3 X-21.142 Y41.278 I-.731 J-1.51 E.07111 G1 X-21.797 Y40.724 E.02846 G2 X-23.763 Y41.097 I-.731 J1.51 E.07111 G1 X-24.418 Y41.651 E.02846 G3 X-26.383 Y41.278 I-.731 J-1.51 E.07111 G1 X-27.038 Y40.724 E.02846 G2 X-29.004 Y41.097 I-.731 J1.51 E.07111 G1 X-29.659 Y41.651 E.02846 G1 X-30.314 Y41.845 E.02266 G3 X-31.01 Y41.443 I.064 J-.913 E.02759 G2 X-31.934 Y41.016 I-1.919 J2.937 E.03391 G1 X-32.28 Y40.724 E.015 G2 X-34.245 Y41.097 I-.731 J1.51 E.07111 G1 X-34.9 Y41.651 E.02846 G3 X-36.866 Y41.278 I-.731 J-1.51 E.07111 G1 X-37.521 Y40.724 E.02846 G2 X-39.487 Y41.097 I-.731 J1.51 E.07111 G1 X-40.142 Y41.651 E.02846 G3 X-42.107 Y41.278 I-.731 J-1.51 E.07111 G1 X-42.762 Y40.724 E.02846 G2 X-44.728 Y41.097 I-.731 J1.51 E.07111 G1 X-45.383 Y41.651 E.02846 G3 X-47.348 Y41.278 I-.731 J-1.51 E.07111 G1 X-48.004 Y40.724 E.02846 G2 X-49.969 Y41.097 I-.731 J1.51 E.07111 G1 X-50.624 Y41.651 E.02846 G3 X-52.59 Y41.278 I-.731 J-1.51 E.07111 G1 X-53.245 Y40.724 E.02846 G2 X-55.21 Y41.097 I-.731 J1.51 E.07111 G1 X-55.866 Y41.651 E.02846 G3 X-57.831 Y41.278 I-.731 J-1.51 E.07111 G1 X-58.486 Y40.724 E.02846 G2 X-60.452 Y41.097 I-.731 J1.51 E.07111 G1 X-61.107 Y41.651 E.02846 G3 X-63.072 Y41.278 I-.731 J-1.51 E.07111 G1 X-63.728 Y40.724 E.02846 G2 X-65.693 Y41.097 I-.731 J1.51 E.07111 G1 X-66.348 Y41.651 E.02846 G3 X-68.314 Y41.278 I-.731 J-1.51 E.07111 G1 X-68.969 Y40.724 E.02846 G2 X-70.934 Y41.097 I-.731 J1.51 E.07111 G1 X-71.196 Y41.319 E.01137 G3 X-70.086 Y43.287 I-1.383 J2.077 E.0778 G1 X-69.624 Y43.15 E.01599 G1 X-68.969 Y43.24 E.02194 G3 X-67.659 Y44.272 I-6.475 J9.574 E.05536 G2 X-65.693 Y43.898 I.731 J-1.51 E.07111 G1 X-65.038 Y43.344 E.02846 G3 X-63.072 Y43.718 I.731 J1.51 E.07111 G1 X-62.417 Y44.272 E.02846 G2 X-60.452 Y43.898 I.731 J-1.51 E.07111 G1 X-59.797 Y43.344 E.02846 G3 X-57.831 Y43.718 I.731 J1.51 E.07111 G1 X-57.176 Y44.272 E.02846 G2 X-55.21 Y43.898 I.731 J-1.51 E.07111 G1 X-54.555 Y43.344 E.02846 G3 X-52.59 Y43.718 I.731 J1.51 E.07111 G1 X-51.935 Y44.272 E.02846 G2 X-49.969 Y43.898 I.731 J-1.51 E.07111 G1 X-49.314 Y43.344 E.02846 G3 X-47.348 Y43.718 I.731 J1.51 E.07111 G1 X-46.693 Y44.272 E.02846 G2 X-44.728 Y43.898 I.731 J-1.51 E.07111 G1 X-44.073 Y43.344 E.02846 G3 X-42.107 Y43.718 I.731 J1.51 E.07111 G1 X-41.452 Y44.272 E.02846 G2 X-39.487 Y43.898 I.731 J-1.51 E.07111 G1 X-38.831 Y43.344 E.02846 G3 X-36.866 Y43.718 I.731 J1.51 E.07111 G1 X-36.211 Y44.272 E.02846 G2 X-34.9 Y44.376 I.77 J-1.399 E.04494 G1 X-34.647 Y44.191 E.01039 G3 X-34.698 Y42.597 I2.504 J-.877 E.05375 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-34.814 Y43.294 G1 X-34.797 Y43.62 G1 X-34.647 Y44.191 G1 X-34.9 Y44.376 G1 X-34.963 Y44.384 ;WIPE_END G1 X-30.132 Y42.872 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 G1 F16200 G3 X-30.374 Y44.448 I-2.605 J.407 E.05375 G1 X-29.659 Y44.376 E.02384 G1 X-29.004 Y43.898 E.02689 G3 X-27.038 Y43.24 I1.487 J1.178 E.07274 G1 X-26.383 Y43.718 E.02689 G2 X-24.418 Y44.376 I1.487 J-1.178 E.07274 G1 X-23.763 Y43.898 E.02689 G3 X-21.797 Y43.24 I1.487 J1.178 E.07274 G1 X-21.142 Y43.718 E.02689 G2 X-19.176 Y44.376 I1.487 J-1.178 E.07274 G1 X-18.521 Y43.898 E.02689 G3 X-16.556 Y43.24 I1.487 J1.178 E.07274 G3 X-15.245 Y44.272 I-6.475 J9.574 E.05536 G1 X-14.59 Y44.466 E.02266 G1 X-14.213 Y44.414 E.01263 G1 X-14.213 Y46.042 E.05401 G1 X-20.025 Y46.414 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.483995 G1 F15000 G1 X-20.533 Y46.941 E.02633 G2 X-21.246 Y48.639 I2.548 J2.068 E.06706 G1 X-21.234 Y49.336 E.02507 G1 X-21.212 Y49.528 E.00693 G1 X-20.768 Y49.528 E.01596 G3 X-20.799 Y48.596 I4.051 J-.6 E.03358 G1 X-20.619 Y47.926 E.02494 G1 X-20.334 Y47.413 E.02107 G3 X-19.678 Y46.7 I3.14 J2.23 E.03491 G1 X-19.077 Y46.353 E.02494 G1 X-18.354 Y46.152 E.02699 G1 X-17.603 Y46.144 E.02699 G1 X-16.876 Y46.333 E.02699 G1 X-16.222 Y46.7 E.02698 G1 X-15.688 Y47.228 E.02699 G1 X-15.398 Y47.691 E.01962 ;WIDTH:0.480947 G1 X-15.265 Y48.148 E.01698 ;WIDTH:0.422994 G1 X-15.132 Y48.604 E.01473 G3 X-15.167 Y49.556 I-3.859 J.335 E.02957 G1 X-14.394 Y49.556 E.02394 G1 X-14.394 Y47.367 E.06779 G1 X-14.671 Y47.467 E.00912 G1 X-14.937 Y47.47 E.00823 ;WIDTH:0.48582 G1 X-15.037 Y47.409 E.00424 G1 X-15.337 Y46.973 E.01909 G1 X-15.874 Y46.414 E.02797 G2 X-16.744 Y45.916 I-2.084 J2.632 E.03631 G1 X-17.441 Y45.725 E.02608 G2 X-18.454 Y45.723 I-.513 J3.359 E.03667 G1 X-19.152 Y45.909 E.02609 G2 X-19.992 Y46.391 I1.262 J3.172 E.03507 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-19.614 Y46.135 G1 X-19.152 Y45.909 G1 X-18.454 Y45.723 G1 X-18.148 Y45.701 ;WIPE_END G1 X-14.76 Y49.19 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397572 G1 F15000 G1 X-14.76 Y48.653 E.01552 ;WIDTH:0.419201 G1 X-14.78 Y48.48 E.00533 ;WIDTH:0.462458 G1 X-14.801 Y48.308 E.00594 ;WIDTH:0.505715 G1 X-14.821 Y48.135 E.00655 ;WIDTH:0.527343 G1 X-14.842 Y47.963 E.00686 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.591 Y26.263 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-15.187 Y26.263 E.04658 G1 X-15.187 Y26.039 E.00743 G2 X-14.213 Y26.009 I.454 J-1.093 E.03331 G1 X-14.213 Y23.449 E.08495 G1 X-14.59 Y23.5 E.01263 G1 X-15.187 Y23.324 E.02064 G1 X-15.187 Y24.952 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-15.187 Y23.324 G1 X-14.83 Y23.429 ;WIPE_END G1 X-22.378 Y24.562 Z1.8 F30000 G1 X-73.687 Y32.263 Z1.8 G1 Z1.4 G1 E.8 F1800 G1 F16200 G1 X-73.713 Y30.661 E.05314 G2 X-75.52 Y30.137 I-1.328 J1.202 E.06572 G2 X-76.831 Y31.169 I6.475 J9.574 E.05536 G3 X-78.796 Y30.795 I-.731 J-1.51 E.07111 G1 X-79.451 Y30.241 E.02846 G2 X-81.417 Y30.615 I-.731 J1.51 E.07111 G1 X-82.072 Y31.169 E.02846 G3 X-84.038 Y30.795 I-.731 J-1.51 E.07111 G1 X-84.693 Y30.241 E.02846 G2 X-86.658 Y30.615 I-.731 J1.51 E.07111 G1 X-87.313 Y31.169 E.02846 G3 X-89.279 Y30.795 I-.731 J-1.51 E.07111 G1 X-89.934 Y30.241 E.02846 G1 X-90.687 Y30.061 E.02568 G1 X-90.687 Y27.455 E.08642 G1 X-89.934 Y27.517 E.02505 G3 X-88.624 Y28.548 I-6.475 J9.575 E.05536 G2 X-86.658 Y28.174 I.731 J-1.51 E.07111 G1 X-86.003 Y27.62 E.02846 G3 X-84.038 Y27.994 I.731 J1.51 E.07111 G1 X-83.382 Y28.548 E.02846 G2 X-81.417 Y28.174 I.731 J-1.51 E.07111 G1 X-80.762 Y27.62 E.02846 G3 X-78.796 Y27.994 I.731 J1.51 E.07111 G1 X-78.141 Y28.548 E.02846 G2 X-76.176 Y28.174 I.731 J-1.51 E.07111 G1 X-75.52 Y27.62 E.02846 G3 X-73.713 Y27.879 I.738 J1.29 E.06522 G1 X-73.713 Y25.42 E.08156 G2 X-75.52 Y24.896 I-1.328 J1.202 E.06572 G2 X-76.831 Y25.927 I6.475 J9.574 E.05536 G3 X-78.796 Y25.554 I-.731 J-1.51 E.07111 G1 X-79.451 Y25 E.02846 G2 X-81.417 Y25.373 I-.731 J1.51 E.07111 G1 X-82.072 Y25.927 E.02846 G3 X-84.038 Y25.554 I-.731 J-1.51 E.07111 G1 X-84.687 Y25.005 E.0282 G1 X-84.687 Y22.28 E.0904 G3 X-83.382 Y23.307 I-6.448 J9.531 E.05512 G2 X-81.417 Y22.933 I.731 J-1.51 E.07111 G1 X-80.762 Y22.379 E.02846 G3 X-78.796 Y22.753 I.731 J1.51 E.07111 G1 X-78.141 Y23.307 E.02846 G2 X-76.176 Y22.933 I.731 J-1.51 E.07111 G1 X-75.52 Y22.379 E.02846 G3 X-73.713 Y22.637 I.738 J1.29 E.06522 G1 X-73.713 Y20.179 E.08156 G2 X-75.52 Y19.655 I-1.328 J1.202 E.06572 G2 X-76.831 Y20.686 I6.475 J9.575 E.05536 G3 X-78.796 Y20.312 I-.731 J-1.51 E.07111 G1 X-79.451 Y19.758 E.02846 G2 X-81.417 Y20.132 I-.731 J1.51 E.07111 G1 X-82.072 Y20.686 E.02846 G3 X-84.038 Y20.312 I-.731 J-1.51 E.07111 G1 X-84.687 Y19.737 E.02878 G3 X-85.348 Y19.565 I-.039 J-1.204 E.02298 G1 X-86.003 Y19.655 E.02194 G1 X-86.116 Y19.737 E.00464 G1 X-87.744 Y19.737 E.05401 G1 X-90.687 Y5.482 F30000 G1 F16200 G1 X-90.687 Y3.854 E.05401 G1 X-89.934 Y4.034 E.02568 G1 X-89.279 Y4.588 E.02846 G2 X-87.313 Y4.962 I1.234 J-1.136 E.07111 G1 X-86.658 Y4.408 E.02846 G3 X-84.693 Y4.034 I1.234 J1.136 E.07111 G1 X-84.038 Y4.588 E.02846 G2 X-82.072 Y4.962 I1.234 J-1.136 E.07111 G1 X-81.417 Y4.408 E.02846 G3 X-79.451 Y4.034 I1.234 J1.136 E.07111 G1 X-78.796 Y4.588 E.02846 G2 X-76.831 Y4.962 I1.234 J-1.136 E.07111 G1 X-76.176 Y4.408 E.02846 G3 X-74.21 Y4.034 I1.234 J1.136 E.07111 G1 X-73.555 Y4.588 E.02846 G2 X-71.59 Y4.962 I1.234 J-1.136 E.07111 G1 X-70.934 Y4.408 E.02846 G3 X-68.969 Y4.034 I1.234 J1.136 E.07111 G1 X-68.314 Y4.588 E.02846 G2 X-66.348 Y4.962 I1.234 J-1.136 E.07111 G1 X-65.693 Y4.408 E.02846 G3 X-63.728 Y4.034 I1.234 J1.136 E.07111 G1 X-63.072 Y4.588 E.02846 G2 X-61.107 Y4.962 I1.234 J-1.136 E.07111 G1 X-60.452 Y4.408 E.02846 G3 X-58.486 Y4.034 I1.234 J1.136 E.07111 G1 X-57.831 Y4.588 E.02846 G2 X-55.866 Y4.962 I1.234 J-1.136 E.07111 G1 X-55.21 Y4.408 E.02846 G3 X-53.245 Y4.034 I1.234 J1.136 E.07111 G1 X-52.59 Y4.588 E.02846 G2 X-50.624 Y4.962 I1.234 J-1.136 E.07111 G1 X-49.969 Y4.408 E.02846 G3 X-48.004 Y4.034 I1.234 J1.136 E.07111 G1 X-47.348 Y4.588 E.02846 G2 X-45.383 Y4.962 I1.234 J-1.136 E.07111 G1 X-44.728 Y4.408 E.02846 G3 X-42.762 Y4.034 I1.234 J1.136 E.07111 G1 X-42.107 Y4.588 E.02846 G2 X-40.142 Y4.962 I1.234 J-1.136 E.07111 G1 X-39.487 Y4.408 E.02846 G3 X-37.521 Y4.034 I1.234 J1.136 E.07111 G1 X-36.866 Y4.588 E.02846 G2 X-34.9 Y4.962 I1.234 J-1.136 E.07111 G1 X-34.245 Y4.408 E.02846 G3 X-32.28 Y4.034 I1.234 J1.136 E.07111 G1 X-31.625 Y4.588 E.02846 G2 X-29.659 Y4.962 I1.234 J-1.136 E.07111 G1 X-29.004 Y4.408 E.02846 G3 X-27.038 Y4.034 I1.234 J1.136 E.07111 G1 X-26.383 Y4.588 E.02846 G2 X-24.418 Y4.962 I1.234 J-1.136 E.07111 G1 X-23.763 Y4.408 E.02846 G3 X-21.797 Y4.034 I1.234 J1.136 E.07111 G1 X-21.142 Y4.588 E.02846 G2 X-19.176 Y4.962 I1.234 J-1.136 E.07111 G1 X-18.521 Y4.408 E.02846 G3 X-16.556 Y4.034 I1.234 J1.136 E.07111 G2 X-15.245 Y5.066 I7.786 J-8.543 E.05536 G1 X-14.59 Y5.156 E.02194 G1 X-14.213 Y5.044 E.01305 G1 X-14.213 Y2.483 E.08495 G1 X-14.59 Y2.535 E.01263 G1 X-15.245 Y2.341 E.02266 G1 X-15.901 Y1.787 E.02846 G2 X-17.866 Y1.414 I-1.234 J1.136 E.07111 G1 X-18.521 Y1.968 E.02846 G3 X-20.487 Y2.341 I-1.234 J-1.136 E.07111 G1 X-21.142 Y1.787 E.02846 G2 X-23.107 Y1.414 I-1.234 J1.136 E.07111 G1 X-23.763 Y1.968 E.02846 G3 X-25.728 Y2.341 I-1.234 J-1.136 E.07111 G1 X-26.383 Y1.787 E.02846 G2 X-28.349 Y1.414 I-1.234 J1.136 E.07111 G1 X-29.004 Y1.968 E.02846 G3 X-30.969 Y2.341 I-1.234 J-1.136 E.07111 G1 X-31.625 Y1.787 E.02846 G2 X-33.59 Y1.414 I-1.234 J1.136 E.07111 G1 X-34.245 Y1.968 E.02846 G3 X-36.211 Y2.341 I-1.234 J-1.136 E.07111 G1 X-36.866 Y1.787 E.02846 G2 X-38.831 Y1.414 I-1.234 J1.136 E.07111 G1 X-39.487 Y1.968 E.02846 G3 X-41.452 Y2.341 I-1.234 J-1.136 E.07111 G1 X-42.107 Y1.787 E.02846 G2 X-44.073 Y1.414 I-1.234 J1.136 E.07111 G1 X-44.728 Y1.968 E.02846 G3 X-46.693 Y2.341 I-1.234 J-1.136 E.07111 G1 X-47.348 Y1.787 E.02846 G2 X-49.314 Y1.414 I-1.234 J1.136 E.07111 G1 X-49.969 Y1.968 E.02846 G3 X-51.935 Y2.341 I-1.234 J-1.136 E.07111 G1 X-52.59 Y1.787 E.02846 G2 X-54.555 Y1.414 I-1.234 J1.136 E.07111 G1 X-55.21 Y1.968 E.02846 G3 X-57.176 Y2.341 I-1.234 J-1.136 E.07111 G1 X-57.831 Y1.787 E.02846 G2 X-59.797 Y1.414 I-1.234 J1.136 E.07111 G1 X-60.452 Y1.968 E.02846 G3 X-62.417 Y2.341 I-1.234 J-1.136 E.07111 G1 X-63.072 Y1.787 E.02846 G2 X-65.038 Y1.414 I-1.234 J1.136 E.07111 G1 X-65.693 Y1.968 E.02846 G3 X-67.659 Y2.341 I-1.234 J-1.136 E.07111 G1 X-68.314 Y1.787 E.02846 G2 X-70.279 Y1.414 I-1.234 J1.136 E.07111 G1 X-70.934 Y1.968 E.02846 G3 X-72.9 Y2.341 I-1.234 J-1.136 E.07111 G1 X-73.555 Y1.787 E.02846 G2 X-75.52 Y1.414 I-1.234 J1.136 E.07111 G1 X-76.176 Y1.968 E.02846 G3 X-78.141 Y2.341 I-1.234 J-1.136 E.07111 G1 X-78.796 Y1.787 E.02846 G2 X-80.762 Y1.414 I-1.234 J1.136 E.07111 G1 X-81.417 Y1.968 E.02846 G3 X-83.382 Y2.341 I-1.234 J-1.136 E.07111 G1 X-84.038 Y1.787 E.02846 G2 X-86.003 Y1.414 I-1.234 J1.136 E.07111 G1 X-86.658 Y1.968 E.02846 G3 X-88.624 Y2.341 I-1.234 J-1.136 E.07111 G2 X-89.934 Y1.31 I-7.786 J8.543 E.05536 G1 X-90.687 Y1.249 E.02505 G1 X-90.687 Y-.379 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X-90.687 Y1.249 G1 X-90.316 Y1.279 ;WIPE_END G1 X-83.347 Y-1.832 Z1.8 F30000 G1 X6.16 Y-41.79 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z1.8 F30000 G1 X74.198 Y15.448 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z1.8 F30000 G1 X90.96 Y7.29 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z1.8 F30000 G1 X75.04 Y16.29 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y8.178 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y9.806 E.05401 G3 X75.153 Y9.172 I4.803 J5.492 E.03495 G3 X76.387 Y9.253 I.527 J1.407 E.04226 G1 X76.387 Y11.782 E.08389 G2 X74.498 Y12.45 I-.418 J1.822 E.07014 G1 X74.313 Y12.585 E.0076 G1 X74.313 Y15.047 E.08167 G3 X75.153 Y14.413 I4.803 J5.492 E.03495 G3 X76.387 Y14.494 I.527 J1.407 E.04226 G1 X76.387 Y15.237 E.02463 G1 X75.501 Y15.237 E.02938 G1 X77.223 Y16 F30000 ;TYPE:Gap infill ;WIDTH:0.187921 G1 F12000 G1 X91.178 Y16 E.16489 ;WIDTH:0.212089 G1 X91.226 Y15.976 E.00074 ;WIDTH:0.260422 G1 X91.274 Y15.952 E.00096 ;WIDTH:0.308756 G1 X91.323 Y15.928 E.00117 ;WIDTH:0.346671 G1 X91.336 Y15.914 E.00048 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.00055 G1 X91.35 Y7.1 E.24737 ;WIDTH:0.374169 G1 X91.336 Y7.086 E.00052 ;WIDTH:0.346671 G1 X91.323 Y7.073 E.00048 ;WIDTH:0.308755 G1 X91.274 Y7.048 E.00117 ;WIDTH:0.260421 G1 X91.226 Y7.024 E.00096 ;WIDTH:0.188109 G1 X91.178 Y7 E.00064 G1 X77.223 Y7 E.1651 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X79.223 Y7 ;WIPE_END G1 X74.591 Y13.067 Z1.8 F30000 G1 X55.548 Y38.01 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X49.645 Y-5.756 Z1.8 F30000 G1 X3.102 Y40.648 Z1.8 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X35.998 Y-10.448 E1.09122 G1 X35.998 Y40.648 E1.69494 G1 X3.142 Y40.648 E1.08989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X3.624 Y40.214 Z1.8 F30000 G1 Z1.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.421604 G1 F15000 G1 X3.553 Y40.255 E.00253 G1 X3.628 Y40.29 E.00254 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.426 Y-9.083 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.568975 G1 F14548.025 G1 X35.426 Y-9.981 E.0385 G1 X34.528 Y-9.981 E.0385 G1 X35.397 Y-9.112 E.05273 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.502 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420498 G1 F15000 G1 X35.5 Y-8.423 E.08696 G1 X35.5 Y-7.889 E.01643 G1 X33.138 Y-10.252 E.10281 G1 X32.604 Y-10.252 E.01643 G1 X35.5 Y-7.355 E.12604 G1 X35.5 Y-6.821 E.01643 G1 X32.07 Y-10.252 E.14928 G1 X31.536 Y-10.252 E.01643 G1 X35.5 Y-6.287 E.17251 G1 X35.5 Y-5.753 E.01643 G1 X31.002 Y-10.252 E.19574 G1 X30.468 Y-10.252 E.01643 G1 X35.5 Y-5.219 E.21898 G1 X35.5 Y-4.685 E.01643 G1 X29.934 Y-10.252 E.24221 G1 X29.4 Y-10.252 E.01643 G1 X35.5 Y-4.151 E.26545 G1 X35.5 Y-3.617 E.01643 G1 X28.866 Y-10.252 E.28868 G1 X28.332 Y-10.252 E.01643 G1 X35.5 Y-3.083 E.31192 G1 X35.5 Y-2.549 E.01643 G1 X27.798 Y-10.252 E.33515 G1 X27.264 Y-10.252 E.01643 G1 X35.5 Y-2.015 E.35839 G1 X35.5 Y-1.481 E.01643 G1 X26.73 Y-10.252 E.38162 G1 X26.196 Y-10.252 E.01643 G1 X35.5 Y-.947 E.40486 G1 X35.5 Y-.414 E.01643 G1 X25.662 Y-10.252 E.42809 G1 X25.128 Y-10.252 E.01643 G1 X35.5 Y.12 E.45132 G1 X35.5 Y.654 E.01643 G1 X24.594 Y-10.252 E.47456 G1 X24.06 Y-10.252 E.01643 G1 X35.5 Y1.188 E.49779 G1 X35.5 Y1.722 E.01643 G1 X23.526 Y-10.252 E.52103 G1 X22.992 Y-10.252 E.01643 G1 X35.5 Y2.256 E.54426 G1 X35.5 Y2.79 E.01643 G1 X22.458 Y-10.252 E.5675 G1 X21.924 Y-10.252 E.01643 G1 X35.5 Y3.324 E.59073 G1 X35.5 Y3.858 E.01643 G1 X21.39 Y-10.252 E.61397 G1 X20.856 Y-10.252 E.01643 G1 X35.5 Y4.392 E.6372 G1 X35.5 Y4.926 E.01643 G1 X20.322 Y-10.252 E.66043 G1 X19.788 Y-10.252 E.01643 G1 X35.5 Y5.46 E.68367 G1 X35.5 Y5.994 E.01643 G1 X19.254 Y-10.252 E.7069 G1 X18.72 Y-10.252 E.01643 G1 X35.5 Y6.528 E.73014 G1 X35.5 Y7.062 E.01643 G1 X18.186 Y-10.252 E.75337 G1 X17.652 Y-10.252 E.01643 G1 X35.5 Y7.596 E.77661 G1 X35.5 Y8.13 E.01643 G1 X17.118 Y-10.252 E.79984 G1 X16.584 Y-10.252 E.01643 G1 X35.5 Y8.664 E.82308 G1 X35.5 Y9.198 E.01643 G1 X16.05 Y-10.252 E.84631 G1 X15.516 Y-10.252 E.01643 G1 X35.5 Y9.732 E.86955 G1 X35.5 Y10.266 E.01643 G1 X14.982 Y-10.252 E.89278 G1 X14.448 Y-10.252 E.01643 G1 X35.5 Y10.8 E.91601 G1 X35.5 Y11.334 E.01643 G1 X13.914 Y-10.252 E.93925 G1 X13.38 Y-10.252 E.01643 G1 X35.5 Y11.868 E.96248 G1 X35.5 Y12.402 E.01643 G1 X12.846 Y-10.252 E.98572 G1 X12.312 Y-10.252 E.01643 G1 X35.5 Y12.936 E1.00895 G1 X35.5 Y13.47 E.01643 G1 X11.778 Y-10.252 E1.03219 G1 X11.245 Y-10.252 E.01643 G1 X35.5 Y14.004 E1.05542 G1 X35.5 Y14.538 E.01643 G1 X10.711 Y-10.252 E1.07866 G1 X10.177 Y-10.252 E.01643 G1 X35.5 Y15.072 E1.10189 G1 X35.5 Y15.606 E.01643 G1 X9.643 Y-10.252 E1.12512 G1 X9.109 Y-10.252 E.01643 G1 X35.5 Y16.14 E1.14836 G1 X35.5 Y16.674 E.01643 G1 X8.575 Y-10.252 E1.17159 G1 X8.041 Y-10.252 E.01643 G1 X35.5 Y17.208 E1.19483 G1 X35.5 Y17.742 E.01643 G1 X7.507 Y-10.252 E1.21806 G1 X6.973 Y-10.252 E.01643 G1 X35.5 Y18.276 E1.2413 G1 X35.5 Y18.81 E.01643 G1 X6.439 Y-10.252 E1.26453 G1 X5.905 Y-10.252 E.01643 G1 X35.5 Y19.344 E1.28777 G1 X35.5 Y19.878 E.01643 G1 X5.371 Y-10.252 E1.311 G1 X4.837 Y-10.252 E.01643 G1 X35.5 Y20.412 E1.33424 G1 X35.5 Y20.946 E.01643 G1 X4.303 Y-10.252 E1.35747 G1 X3.769 Y-10.252 E.01643 G1 X35.5 Y21.48 E1.3807 G1 X35.5 Y22.013 E.01643 G1 X3.6 Y-9.887 E1.38806 G1 X3.6 Y-9.353 E.01643 G1 X35.5 Y22.547 E1.38806 G1 X35.5 Y23.081 E.01643 G1 X3.6 Y-8.819 E1.38806 G1 X3.6 Y-8.285 E.01643 G1 X35.5 Y23.615 E1.38806 G1 X35.5 Y24.149 E.01643 G1 X3.6 Y-7.751 E1.38806 G1 X3.6 Y-7.217 E.01643 G1 X35.5 Y24.683 E1.38806 G1 X35.5 Y25.217 E.01643 G1 X3.6 Y-6.683 E1.38806 G1 X3.6 Y-6.149 E.01643 G1 X35.5 Y25.751 E1.38806 G1 X35.5 Y26.285 E.01643 G1 X3.6 Y-5.615 E1.38806 G1 X3.6 Y-5.081 E.01643 G1 X35.5 Y26.819 E1.38806 G1 X35.5 Y27.353 E.01643 G1 X3.6 Y-4.547 E1.38806 G1 X3.6 Y-4.013 E.01643 G1 X35.5 Y27.887 E1.38806 G1 X35.5 Y28.421 E.01643 G1 X3.6 Y-3.479 E1.38806 G1 X3.6 Y-2.945 E.01643 G1 X35.5 Y28.955 E1.38806 G1 X35.5 Y29.489 E.01643 G1 X3.6 Y-2.411 E1.38806 G1 X3.6 Y-1.877 E.01643 G1 X35.5 Y30.023 E1.38806 G1 X35.5 Y30.557 E.01643 G1 X3.6 Y-1.343 E1.38806 G1 X3.6 Y-.809 E.01643 G1 X35.5 Y31.091 E1.38806 G1 X35.5 Y31.625 E.01643 G1 X3.6 Y-.275 E1.38806 G1 X3.6 Y.259 E.01643 G1 X35.5 Y32.159 E1.38806 G1 X35.5 Y32.693 E.01643 G1 X3.6 Y.793 E1.38806 G1 X3.6 Y1.327 E.01643 G1 X35.5 Y33.227 E1.38806 G1 X35.5 Y33.761 E.01643 G1 X3.6 Y1.86 E1.38806 G1 X3.6 Y2.394 E.01643 G1 X35.5 Y34.295 E1.38806 G1 X35.5 Y34.829 E.01643 G1 X3.6 Y2.928 E1.38806 G1 X3.6 Y3.462 E.01643 G1 X35.5 Y35.363 E1.38806 G1 X35.5 Y35.897 E.01643 G1 X3.6 Y3.996 E1.38806 G1 X3.6 Y4.53 E.01643 G1 X35.5 Y36.431 E1.38806 G1 X35.5 Y36.965 E.01643 G1 X3.6 Y5.064 E1.38806 G1 X3.6 Y5.598 E.01643 G1 X35.5 Y37.499 E1.38806 G1 X35.5 Y38.033 E.01643 G1 X3.6 Y6.132 E1.38806 G1 X3.6 Y6.666 E.01643 G1 X35.5 Y38.567 E1.38806 G1 X35.5 Y39.039 E.01453 G3 X35.45 Y39.05 I-.031 J-.02 E.00177 G1 X3.6 Y7.2 E1.38586 G1 X3.6 Y7.734 E.01643 G1 X34.916 Y39.05 E1.36263 G1 X34.382 Y39.05 E.01643 G1 X3.6 Y8.268 E1.3394 G1 X3.6 Y8.802 E.01643 G1 X33.848 Y39.05 E1.31616 G1 X33.703 Y39.05 E.00444 G1 X33.509 Y39.245 E.00848 G1 X3.6 Y9.336 E1.3014 G1 X3.6 Y9.87 E.01643 G1 X33.5 Y39.771 E1.30104 G1 X33.5 Y40.305 E.01643 G1 X3.6 Y10.404 E1.30104 G1 X3.6 Y10.938 E.01643 G1 X33.114 Y40.452 E1.28421 G1 X32.58 Y40.452 E.01643 G1 X3.6 Y11.472 E1.26098 G1 X3.6 Y12.006 E.01643 G1 X32.046 Y40.452 E1.23774 G1 X31.512 Y40.452 E.01643 G1 X3.6 Y12.54 E1.21451 G1 X3.6 Y13.074 E.01643 G1 X30.978 Y40.452 E1.19127 G1 X30.444 Y40.452 E.01643 G1 X3.6 Y13.608 E1.16804 G1 X3.6 Y14.142 E.01643 G1 X29.91 Y40.452 E1.14481 G1 X29.376 Y40.452 E.01643 G1 X3.6 Y14.676 E1.12157 G1 X3.6 Y15.21 E.01643 G1 X28.842 Y40.452 E1.09834 G1 X28.308 Y40.452 E.01643 G1 X3.6 Y15.744 E1.0751 G1 X3.6 Y16.278 E.01643 G1 X27.774 Y40.452 E1.05187 G1 X27.24 Y40.452 E.01643 G1 X3.6 Y16.812 E1.02863 G1 X3.6 Y17.346 E.01643 G1 X26.706 Y40.452 E1.0054 G1 X26.172 Y40.452 E.01643 G1 X3.6 Y17.88 E.98216 G1 X3.6 Y18.414 E.01643 G1 X25.638 Y40.452 E.95893 G1 X25.104 Y40.452 E.01643 G1 X3.6 Y18.948 E.9357 G1 X3.6 Y19.482 E.01643 G1 X24.57 Y40.452 E.91246 G1 X24.036 Y40.452 E.01643 G1 X3.6 Y20.016 E.88923 G1 X3.6 Y20.55 E.01643 G1 X23.502 Y40.452 E.86599 G1 X22.968 Y40.452 E.01643 G1 X3.6 Y21.084 E.84276 G1 X3.6 Y21.618 E.01643 G1 X22.434 Y40.452 E.81952 G1 X21.9 Y40.452 E.01643 G1 X3.6 Y22.152 E.79629 G1 X3.6 Y22.686 E.01643 G1 X21.366 Y40.452 E.77305 G1 X20.832 Y40.452 E.01643 G1 X3.6 Y23.22 E.74982 G1 X3.6 Y23.754 E.01643 G1 X20.298 Y40.452 E.72658 G1 X19.764 Y40.452 E.01643 G1 X3.6 Y24.287 E.70335 G1 X3.6 Y24.821 E.01643 G1 X19.23 Y40.452 E.68012 G1 X18.696 Y40.452 E.01643 G1 X3.6 Y25.355 E.65688 G1 X3.6 Y25.889 E.01643 G1 X18.162 Y40.452 E.63365 G1 X17.628 Y40.452 E.01643 G1 X3.6 Y26.423 E.61041 G1 X3.6 Y26.957 E.01643 G1 X17.094 Y40.452 E.58718 G1 X16.56 Y40.452 E.01643 G1 X3.6 Y27.491 E.56394 G1 X3.6 Y28.025 E.01643 G1 X16.026 Y40.452 E.54071 G1 X15.492 Y40.452 E.01643 G1 X3.6 Y28.559 E.51747 G1 X3.6 Y29.093 E.01643 G1 X14.958 Y40.452 E.49424 G1 X14.424 Y40.452 E.01643 G1 X3.6 Y29.627 E.47101 G1 X3.6 Y30.161 E.01643 G1 X13.89 Y40.452 E.44777 G1 X13.356 Y40.452 E.01643 G1 X3.6 Y30.695 E.42454 G1 X3.6 Y31.229 E.01643 G1 X12.822 Y40.452 E.4013 G1 X12.289 Y40.452 E.01643 G1 X3.6 Y31.763 E.37807 G1 X3.6 Y32.297 E.01643 G1 X11.755 Y40.452 E.35483 G1 X11.221 Y40.452 E.01643 G1 X3.6 Y32.831 E.3316 G1 X3.6 Y33.365 E.01643 G1 X10.687 Y40.452 E.30836 G1 X10.153 Y40.452 E.01643 M73 P18 R88 G1 X3.6 Y33.899 E.28513 G1 X3.6 Y34.433 E.01643 G1 X9.619 Y40.452 E.26189 G1 X9.085 Y40.452 E.01643 G1 X3.6 Y34.967 E.23866 G1 X3.6 Y35.501 E.01643 G1 X8.551 Y40.452 E.21543 G1 X8.017 Y40.452 E.01643 G1 X3.6 Y36.035 E.19219 G1 X3.6 Y36.569 E.01643 G1 X7.483 Y40.452 E.16896 G1 X6.949 Y40.452 E.01643 G1 X3.6 Y37.103 E.14572 G1 X3.6 Y37.637 E.01643 G1 X6.415 Y40.452 E.12249 G1 X5.881 Y40.452 E.01643 G1 X3.6 Y38.171 E.09925 G1 X3.6 Y38.705 E.01643 G1 X5.347 Y40.452 E.07602 G1 X4.813 Y40.452 E.01643 G1 X3.6 Y39.239 E.05278 G1 X3.6 Y39.773 E.01643 G1 X4.449 Y40.622 E.03693 ;LAYER_CHANGE ;Z:1.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.6 Y39.773 G1 X3.6 Y39.239 G1 X3.788 Y39.427 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2 I1.115 J-.487 P1 F30000 G1 X-16.24 Y-6.41 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-19.244 Y2.614 Z2 F30000 G1 X-31.398 Y31.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.031 Y25.231 Z2 F30000 G1 X-64.59 Y-6.46 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.609 Y-6.68 E.00733 G3 X-63.274 Y-8.67 I2.153 J.001 E.08431 G3 X-62.7 Y-8.818 I.781 J1.849 E.01974 G3 X-64.591 Y-6.398 I.244 J2.139 E.33525 G1 X-64.59 Y-6.42 E.00072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y-6.486 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.201 Y-6.68 E.00645 G3 X-63.118 Y-8.293 I1.745 J.001 E.06835 G3 X-62.65 Y-8.413 I.635 J1.507 E.01608 G3 X-64.185 Y-6.447 I.195 J1.734 E.27149 G1 X-63.749 Y-6.518 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.757 Y-6.852 E.01027 G3 X-62.787 Y-7.946 I1.297 J.173 E.04767 G1 X-62.597 Y-7.981 E.00594 G3 X-63.754 Y-6.481 I.137 J1.302 E.18764 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.757 Y-6.852 G1 X-63.715 Y-7.021 G1 X-63.585 Y-7.335 G1 X-63.49 Y-7.478 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.787 Y-7.946 G1 X-62.703 Y-7.962 ;WIPE_END G1 X-55.101 Y-7.274 Z2 F30000 G1 X-40.429 Y-5.946 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.467 Y-5.858 E.00316 G3 X-43.274 Y-8.67 I-1.99 J-.821 E.28074 G3 X-42.7 Y-8.818 I.781 J1.849 E.01974 G3 X-40.377 Y-6.124 I.244 J2.139 E.13887 G1 X-40.418 Y-5.984 E.00485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.814 Y-6.077 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.843 Y-6.014 E.00227 G3 X-43.118 Y-8.293 I-1.613 J-.665 E.22758 G3 X-42.65 Y-8.413 I.635 J1.507 E.01608 G3 X-40.77 Y-6.23 I.195 J1.734 E.11247 G1 X-40.803 Y-6.115 E.00396 G1 X-41.226 Y-6.216 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.249 Y-6.182 E.00125 G3 X-42.787 Y-7.946 I-1.211 J-.497 E.16369 G1 X-42.597 Y-7.981 E.00594 G3 X-41.195 Y-6.344 I.137 J1.302 E.07783 G1 X-41.217 Y-6.255 E.0028 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.249 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.826 Y-5.427 ;WIPE_END G1 X-38.266 Y.694 Z2 F30000 G1 X-20.002 Y25.21 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.229 Y29.654 Z2 F30000 G1 X-33.188 Y45.34 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.275 Y45.312 E.00302 G3 X-33.274 Y41.33 I.818 J-1.991 E.16865 G3 X-32.7 Y41.182 I.782 J1.85 E.01974 G3 X-33.008 Y45.402 I.244 J2.139 E.25092 M73 P19 R88 G1 X-33.15 Y45.353 E.005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.057 Y44.954 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.119 Y44.935 E.00214 G3 X-33.118 Y41.707 I.663 J-1.614 E.13673 G3 X-32.65 Y41.587 I.635 J1.507 E.01608 G3 X-32.902 Y45.008 I.195 J1.734 E.20329 G1 X-33.02 Y44.967 E.00412 G1 X-32.914 Y44.541 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.532 E.00119 G3 X-32.951 Y42.109 I.497 J-1.211 E.09506 G3 X-32.597 Y42.019 I.479 J1.141 E.01127 G3 X-32.621 Y44.619 I.143 J1.301 E.13589 G1 X-32.876 Y44.551 E.0081 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.532 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.661 Y43.821 G1 X-33.75 Y43.489 G1 X-33.759 Y43.296 G1 X-33.716 Y42.981 G1 X-33.703 Y42.944 ;WIPE_END G1 X-41.322 Y43.408 Z2 F30000 G1 X-73.162 Y45.349 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.275 Y45.312 E.00394 G3 X-73.274 Y41.33 I.818 J-1.991 E.16865 G3 X-72.7 Y41.182 I.782 J1.85 E.01974 G3 X-73.008 Y45.402 I.244 J2.139 E.25092 G1 X-73.124 Y45.362 E.00408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.031 Y44.963 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.119 Y44.935 E.00306 G3 X-73.118 Y41.707 I.663 J-1.614 E.13673 G3 X-72.65 Y41.587 I.635 J1.507 E.01608 G3 X-72.902 Y45.008 I.195 J1.734 E.20329 G1 X-72.993 Y44.976 E.0032 G1 X-72.891 Y44.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.107 Y44.458 E.00713 G3 X-72.787 Y42.054 I.647 J-1.138 E.09537 G1 X-72.597 Y42.019 E.00594 G3 X-72.79 Y44.587 I.137 J1.302 E.14082 G1 X-72.855 Y44.559 E.00218 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.107 Y44.458 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.749 Y43.491 G1 X-73.76 Y43.32 G1 X-73.716 Y42.981 G1 X-73.71 Y42.966 ;WIPE_END G1 X-77.867 Y36.565 Z2 F30000 G1 X-88.66 Y19.948 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-79.786 Y17.485 Z2 F30000 G1 X-18.794 Y-11.948 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-18.044 Y-7.252 I2.847 J1.953 E.174 G1 X-20.002 Y-7.252 E.06494 G1 X-20.002 Y-1.748 E.18258 G1 X-15.398 Y-1.748 E.15273 G1 X-15.398 Y-6.595 E.1608 G2 X-14.002 Y-7.156 I-.443 J-3.121 E.05038 G1 X-14.002 Y49.948 E1.89424 G1 X-14.624 Y49.948 E.02063 G2 X-21.276 Y49.948 I-3.326 J-.939 E.42323 G1 X-83.624 Y49.948 E2.0682 G2 X-90.276 Y49.948 I-3.326 J-.939 E.42323 G1 X-90.898 Y49.948 E.02063 G1 X-90.898 Y-7.156 E1.89424 G2 X-89.502 Y-6.595 I1.976 J-2.903 E.05029 G1 X-89.502 Y-1.748 E.1608 G1 X-84.898 Y-1.748 E.15273 G1 X-84.898 Y-7.252 E.18258 G1 X-86.856 Y-7.252 E.06494 G2 X-86.106 Y-11.948 I-2.111 J-2.745 E.17387 G1 X-84.398 Y-11.948 E.05666 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-18.834 Y-11.948 E.05533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.928 Y-12.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-18.419 Y-11.776 E.0252 G2 X-16.715 Y-7.049 I2.481 J1.776 E.1958 G1 X-16.749 Y-6.845 E.00687 G1 X-19.595 Y-6.845 E.09441 G1 X-19.595 Y-2.155 E.15558 G1 X-15.805 Y-2.155 E.12572 G1 X-15.805 Y-6.963 E.15949 G2 X-14.095 Y-7.583 I-.161 J-3.109 E.06121 G1 X-13.595 Y-8.022 E.02208 G1 X-13.595 Y50.355 E1.93647 G1 X-15.229 Y50.355 E.0542 G2 X-20.671 Y50.355 I-2.721 J-1.355 E.40997 G1 X-84.229 Y50.355 E2.10832 G2 X-89.671 Y50.355 I-2.721 J-1.355 E.40997 G1 X-91.305 Y50.355 E.0542 G1 X-91.305 Y-8.022 E1.93647 G1 X-90.805 Y-7.583 E.02208 G2 X-89.095 Y-6.963 I1.849 J-2.432 E.06125 G1 X-89.095 Y-2.155 E.15949 G1 X-85.305 Y-2.155 E.12572 G1 X-85.305 Y-6.845 E.15558 G1 X-88.151 Y-6.845 E.09441 G1 X-88.185 Y-7.049 E.00687 G2 X-86.533 Y-11.855 I-.779 J-2.954 E.19902 G1 X-86.972 Y-12.355 E.02208 G1 X-84.805 Y-12.355 E.07189 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-17.968 Y-12.355 E.07056 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-18.419 Y-11.776 G1 X-18.588 Y-11.523 G1 X-18.764 Y-11.166 G1 X-18.893 Y-10.788 G1 X-18.925 Y-10.627 ;WIPE_END G1 X-15.3 Y-12.527 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-15.276 Y-12.516 E.0008 G3 X-17.255 Y-12.261 I-.682 J2.516 E.4403 G3 X-16.016 Y-12.606 I1.288 J2.227 E.03996 G3 X-15.61 Y-12.584 I.059 J2.606 E.01251 G1 X-15.339 Y-12.534 E.00846 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.276 Y-12.516 G1 X-14.951 Y-12.412 G1 X-14.645 Y-12.261 G1 X-14.361 Y-12.071 G1 X-14.104 Y-11.846 G1 X-13.879 Y-11.589 G1 X-13.753 Y-11.4 ;WIPE_END G1 X-21.368 Y-10.893 Z2 F30000 G1 X-88.66 Y-6.41 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-90.277 Y-7.754 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-90.539 Y-7.929 E.0097 G3 X-90.255 Y-12.261 I1.582 J-2.072 E.15764 G3 X-89.016 Y-12.606 I1.288 J2.227 E.03996 G3 X-90.243 Y-7.733 I.059 J2.606 E.29472 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.539 Y-7.929 G1 X-90.796 Y-8.154 G1 X-91.021 Y-8.411 G1 X-91.211 Y-8.695 G1 X-91.362 Y-9.001 G1 X-91.451 Y-9.265 ;WIPE_END G1 X-83.828 Y-9.639 Z2 F30000 G1 X-19.66 Y-12.79 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-16.055 Y50.79 E.08896 G2 X-19.845 Y50.79 I-1.895 J-1.789 E.37273 G1 X-85.055 Y50.79 E2.00373 G2 X-88.845 Y50.79 I-1.895 J-1.789 E.37273 G1 X-91.74 Y50.79 E.08896 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-17.692 Y-12.259 Z2 F30000 G1 Z1.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.141341 G1 F12000 G1 X-17.554 Y-12.38 E.00147 ;WIDTH:0.163551 G1 X-17.416 Y-12.501 E.00181 ;WIDTH:0.17539 G1 X-17.206 Y-12.558 E.00235 G1 X-14.656 Y-12.572 F30000 ;WIDTH:0.418032 G1 F12000 G1 X-13.377 Y-12.138 E.04129 G1 X-13.812 Y-12.572 F30000 ;WIDTH:0.401732 G1 F12000 G1 X-13.377 Y-11.294 E.03949 G1 X-13.392 Y-8.744 F30000 ;WIDTH:0.175392 G1 F12000 G1 X-13.449 Y-8.534 E.00235 ;WIDTH:0.163549 G1 X-13.57 Y-8.396 E.00181 ;WIDTH:0.14134 G1 X-13.691 Y-8.258 E.00147 G1 X-15.187 Y-3.649 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-15.187 Y-5.277 E.05401 G2 X-14.213 Y-5.485 I.244 J-1.243 E.03394 G1 X-14.213 Y-3.54 E.06452 G1 X-14.59 Y-3.756 E.01443 G1 X-14.59 Y-.062 E.12254 G1 X-15.245 Y-.033 E.02176 G3 X-15.901 Y-.434 I.244 J-1.135 E.02597 G1 X-16.661 Y-1.16 E.03487 G1 X-18.393 Y-1.16 E.05746 G2 X-19.176 Y-.377 I3.516 J4.3 E.03679 G3 X-20.814 Y-.158 I-1.024 J-1.426 E.05707 G3 X-21.797 Y-1.109 I4.257 J-5.381 E.04544 G2 X-23.435 Y-1.328 I-1.024 J1.426 E.05707 G2 X-24.418 Y-.377 I4.256 J5.381 E.04544 G3 X-26.056 Y-.158 I-1.024 J-1.426 E.05707 G3 X-27.038 Y-1.109 I4.257 J-5.381 E.04544 G2 X-28.676 Y-1.328 I-1.024 J1.426 E.05707 G2 X-29.659 Y-.377 I4.256 J5.381 E.04544 G3 X-31.297 Y-.158 I-1.024 J-1.426 E.05707 G3 X-32.28 Y-1.109 I4.256 J-5.381 E.04544 G2 X-33.918 Y-1.328 I-1.024 J1.426 E.05707 G2 X-34.9 Y-.377 I4.256 J5.381 E.04544 G3 X-36.538 Y-.158 I-1.024 J-1.426 E.05707 G3 X-37.521 Y-1.109 I4.256 J-5.381 E.04544 G2 X-39.159 Y-1.328 I-1.024 J1.426 E.05707 G2 X-40.142 Y-.377 I4.256 J5.381 E.04544 G3 X-41.78 Y-.158 I-1.024 J-1.426 E.05707 G3 X-42.762 Y-1.109 I4.256 J-5.381 E.04544 G2 X-44.4 Y-1.328 I-1.024 J1.426 E.05707 G2 X-45.383 Y-.377 I4.256 J5.381 E.04544 G3 X-47.021 Y-.158 I-1.024 J-1.426 E.05707 G3 X-48.004 Y-1.109 I4.257 J-5.381 E.04544 G2 X-49.642 Y-1.328 I-1.024 J1.426 E.05707 G2 X-50.624 Y-.377 I4.256 J5.381 E.04544 G3 X-52.262 Y-.158 I-1.024 J-1.426 E.05707 G3 X-53.245 Y-1.109 I4.257 J-5.381 E.04544 G2 X-54.883 Y-1.328 I-1.024 J1.426 E.05707 G2 X-55.866 Y-.377 I4.256 J5.381 E.04544 G3 X-57.504 Y-.158 I-1.024 J-1.426 E.05707 G3 X-58.486 Y-1.109 I4.257 J-5.381 E.04544 G2 X-60.124 Y-1.328 I-1.024 J1.426 E.05707 G2 X-61.107 Y-.377 I4.256 J5.381 E.04544 G3 X-62.745 Y-.158 I-1.024 J-1.426 E.05707 G3 X-63.728 Y-1.109 I4.256 J-5.381 E.04544 G2 X-65.365 Y-1.328 I-1.024 J1.426 E.05707 G2 X-66.348 Y-.377 I4.256 J5.381 E.04544 G3 X-67.986 Y-.158 I-1.024 J-1.426 E.05707 G3 X-68.969 Y-1.109 I4.256 J-5.381 E.04544 G2 X-70.607 Y-1.328 I-1.024 J1.426 E.05707 G2 X-71.59 Y-.377 I4.256 J5.381 E.04544 G3 X-73.227 Y-.158 I-1.024 J-1.426 E.05707 G3 X-74.21 Y-1.109 I4.256 J-5.381 E.04544 G2 X-75.848 Y-1.328 I-1.024 J1.426 E.05707 G2 X-76.831 Y-.377 I4.256 J5.381 E.04544 G3 X-78.469 Y-.158 I-1.024 J-1.426 E.05707 G3 X-79.451 Y-1.109 I4.257 J-5.381 E.04544 G2 X-81.089 Y-1.328 I-1.024 J1.426 E.05707 G2 X-82.072 Y-.377 I4.256 J5.381 E.04544 G3 X-83.71 Y-.158 I-1.024 J-1.426 E.05707 G2 X-84.798 Y-1.16 I-23.36 J24.284 E.04907 G1 X-86.53 Y-1.16 E.05746 G2 X-87.313 Y-.377 I3.516 J4.3 E.03679 G3 X-88.951 Y-.158 I-1.024 J-1.426 E.05707 G2 X-90.04 Y-1.16 I-23.361 J24.285 E.04907 G1 X-88.411 Y-1.16 E.05401 G1 X-89.796 Y-3.867 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-89.796 Y-1.544 E.06436 G1 X-89.777 Y-1.454 E.00256 G1 X-84.694 Y-1.454 E.14083 G1 X-84.604 Y-1.473 E.00256 G1 X-84.604 Y-4.856 E.09375 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.717 Y-7.546 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-84.604 Y-7.528 E.00317 G1 X-84.604 Y-5.616 E.05299 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.019 Y-7.803 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-85.348 Y-9.286 I-3.526 J-2.488 E.05431 G1 X-84.693 Y-9.315 E.02175 G3 X-84.038 Y-8.914 I-.244 J1.136 E.02597 G1 X-83.382 Y-8.239 E.0312 G2 X-81.745 Y-8.02 I1.024 J-1.426 E.05707 G2 X-80.762 Y-8.971 I-4.256 J-5.381 E.04544 G3 X-79.124 Y-9.19 I1.024 J1.426 E.05707 G3 X-78.141 Y-8.239 I-4.256 J5.381 E.04544 G2 X-76.503 Y-8.02 I1.024 J-1.426 E.05707 G2 X-75.52 Y-8.971 I-4.256 J-5.381 E.04544 G3 X-73.883 Y-9.19 I1.024 J1.426 E.05707 G3 X-72.9 Y-8.239 I-4.256 J5.381 E.04544 G2 X-71.262 Y-8.02 I1.024 J-1.426 E.05707 G2 X-70.279 Y-8.971 I-4.256 J-5.381 E.04544 G3 X-68.641 Y-9.19 I1.024 J1.426 E.05707 G3 X-67.659 Y-8.239 I-4.256 J5.381 E.04544 G2 X-66.021 Y-8.02 I1.024 J-1.426 E.05707 G2 X-65.038 Y-8.971 I-4.256 J-5.381 E.04544 G3 X-63.482 Y-9.221 I1.03 J1.444 E.05418 G2 X-65.191 Y-6.636 I1.051 J2.553 E.10915 G2 X-65.693 Y-6.293 I.238 J.888 E.02055 G1 X-66.348 Y-5.618 E.0312 G3 X-67.986 Y-5.399 I-1.024 J-1.426 E.05707 G3 X-68.969 Y-6.35 I4.256 J-5.381 E.04544 G2 X-70.607 Y-6.569 I-1.024 J1.426 E.05707 G2 X-71.59 Y-5.618 I4.256 J5.381 E.04544 G3 X-73.227 Y-5.399 I-1.024 J-1.426 E.05707 G3 X-74.21 Y-6.35 I4.256 J-5.381 E.04544 G2 X-75.848 Y-6.569 I-1.024 J1.426 E.05707 G2 X-76.831 Y-5.618 I4.256 J5.381 E.04544 G3 X-78.469 Y-5.399 I-1.024 J-1.426 E.05707 G3 X-79.451 Y-6.35 I4.257 J-5.381 E.04544 G2 X-81.089 Y-6.569 I-1.024 J1.426 E.05707 G2 X-82.072 Y-5.618 I4.256 J5.381 E.04544 G3 X-83.71 Y-5.399 I-1.024 J-1.426 E.05707 G3 X-84.31 Y-5.956 I2.478 J-3.272 E.02719 G1 X-84.31 Y-3.902 E.06813 G3 X-83.382 Y-2.998 I-4.051 J5.081 E.04304 G2 X-81.745 Y-2.779 I1.024 J-1.426 E.05707 G2 X-80.762 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-79.124 Y-3.949 I1.024 J1.426 E.05707 G3 X-78.141 Y-2.998 I-4.256 J5.381 E.04544 G2 X-76.503 Y-2.779 I1.024 J-1.426 E.05707 G2 X-75.52 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-73.883 Y-3.949 I1.024 J1.426 E.05707 G3 X-72.9 Y-2.998 I-4.257 J5.381 E.04544 G2 X-71.262 Y-2.779 I1.024 J-1.426 E.05707 G2 X-70.279 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-68.641 Y-3.949 I1.024 J1.426 E.05707 G3 X-67.659 Y-2.998 I-4.257 J5.381 E.04544 G2 X-66.021 Y-2.779 I1.024 J-1.426 E.05707 G2 X-65.038 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-63.4 Y-3.949 I1.024 J1.426 E.05707 G3 X-62.417 Y-2.998 I-4.257 J5.381 E.04544 G2 X-60.779 Y-2.779 I1.024 J-1.426 E.05707 G2 X-59.797 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-58.159 Y-3.949 I1.024 J1.426 E.05707 G3 X-57.176 Y-2.998 I-4.256 J5.381 E.04544 G2 X-55.538 Y-2.779 I1.024 J-1.426 E.05707 G2 X-54.555 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-52.917 Y-3.949 I1.024 J1.426 E.05707 G3 X-51.935 Y-2.998 I-4.256 J5.381 E.04544 G2 X-50.297 Y-2.779 I1.024 J-1.426 E.05707 G2 X-49.314 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-47.676 Y-3.949 I1.024 J1.426 E.05707 G3 X-46.693 Y-2.998 I-4.256 J5.381 E.04544 G2 X-45.055 Y-2.779 I1.024 J-1.426 E.05707 G2 X-44.073 Y-3.73 I-4.256 J-5.381 E.04544 G1 X-43.418 Y-4.045 E.02411 G2 X-42.422 Y-3.938 I4.329 J-35.784 E.03321 G3 X-41.452 Y-2.998 I-4.21 J5.313 E.04489 G2 X-39.814 Y-2.779 I1.024 J-1.426 E.05707 G2 X-38.831 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-37.193 Y-3.949 I1.024 J1.426 E.05707 G3 X-36.211 Y-2.998 I-4.257 J5.381 E.04544 G2 X-34.573 Y-2.779 I1.024 J-1.426 E.05707 G2 X-33.59 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-31.952 Y-3.949 I1.024 J1.426 E.05707 G3 X-30.969 Y-2.998 I-4.257 J5.381 E.04544 G2 X-29.331 Y-2.779 I1.024 J-1.426 E.05707 G2 X-28.349 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-26.711 Y-3.949 I1.024 J1.426 E.05707 G3 X-25.728 Y-2.998 I-4.256 J5.381 E.04544 G2 X-24.09 Y-2.779 I1.024 J-1.426 E.05707 G2 X-23.107 Y-3.73 I-4.256 J-5.381 E.04544 G3 X-21.47 Y-3.949 I1.024 J1.426 E.05707 G3 X-20.59 Y-3.104 I-3.776 J4.812 E.04051 G1 X-20.59 Y-5.314 E.0733 G3 X-21.142 Y-5.675 I.24 J-.968 E.0223 G1 X-21.797 Y-6.35 E.0312 G2 X-23.435 Y-6.569 I-1.024 J1.426 E.05707 G2 X-24.418 Y-5.618 I4.256 J5.381 E.04544 G3 X-26.056 Y-5.399 I-1.024 J-1.426 E.05707 G3 X-27.038 Y-6.35 I4.257 J-5.381 E.04544 G2 X-28.676 Y-6.569 I-1.024 J1.426 E.05707 G2 X-29.659 Y-5.618 I4.256 J5.381 E.04544 G3 X-31.297 Y-5.399 I-1.024 J-1.426 E.05707 G3 X-32.28 Y-6.35 I4.256 J-5.381 E.04544 G2 X-33.918 Y-6.569 I-1.024 J1.426 E.05707 G2 X-34.9 Y-5.618 I4.256 J5.381 E.04544 G3 X-36.538 Y-5.399 I-1.024 J-1.426 E.05707 G3 X-37.521 Y-6.35 I4.256 J-5.381 E.04544 G2 X-39.159 Y-6.569 I-1.024 J1.426 E.05707 G2 X-39.8 Y-5.971 I2.668 J3.497 E.02913 G2 X-40.022 Y-7.941 I-2.966 J-.663 E.06699 G2 X-39.487 Y-8.296 I-.239 J-.942 E.02172 G1 X-38.831 Y-8.971 E.0312 G3 X-37.193 Y-9.19 I1.024 J1.426 E.05707 G3 X-36.211 Y-8.239 I-4.256 J5.381 E.04544 G2 X-34.573 Y-8.02 I1.024 J-1.426 E.05707 G2 X-33.59 Y-8.971 I-4.256 J-5.381 E.04544 G3 X-31.952 Y-9.19 I1.024 J1.426 E.05707 G3 X-30.969 Y-8.239 I-4.256 J5.381 E.04544 G2 X-29.331 Y-8.02 I1.024 J-1.426 E.05707 G2 X-28.349 Y-8.971 I-4.256 J-5.381 E.04544 G3 X-26.711 Y-9.19 I1.024 J1.426 E.05707 G3 X-25.728 Y-8.239 I-4.256 J5.381 E.04544 G2 X-24.09 Y-8.02 I1.024 J-1.426 E.05707 G2 X-23.107 Y-8.971 I-4.256 J-5.381 E.04544 G3 X-21.47 Y-9.19 I1.024 J1.426 E.05707 G3 X-20.487 Y-8.239 I-4.256 J5.381 E.04544 G2 X-18.99 Y-7.966 I1.044 J-1.484 E.05206 G3 X-19.544 Y-10.683 I3.041 J-2.034 E.09434 G1 X-19.832 Y-10.545 E.01059 G1 X-20.487 Y-10.516 E.02175 G3 X-21.142 Y-10.917 I.244 J-1.135 E.02597 G1 X-21.797 Y-11.592 E.0312 G2 X-23.435 Y-11.811 I-1.024 J1.426 E.05707 G2 X-24.418 Y-10.86 I4.256 J5.381 E.04544 G3 X-26.056 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-27.038 Y-11.592 I4.256 J-5.381 E.04544 G2 X-28.676 Y-11.811 I-1.024 J1.426 E.05707 G2 X-29.659 Y-10.86 I4.256 J5.381 E.04544 G3 X-31.297 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-32.28 Y-11.592 I4.256 J-5.381 E.04544 G2 X-33.918 Y-11.811 I-1.024 J1.426 E.05707 G2 X-34.9 Y-10.86 I4.256 J5.381 E.04544 G3 X-36.538 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-37.521 Y-11.592 I4.256 J-5.381 E.04544 G2 X-39.159 Y-11.811 I-1.024 J1.426 E.05707 G2 X-40.142 Y-10.86 I4.256 J5.381 E.04544 G3 X-41.78 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-42.762 Y-11.592 I4.256 J-5.381 E.04544 G2 X-44.4 Y-11.811 I-1.024 J1.426 E.05707 G2 X-45.383 Y-10.86 I4.256 J5.381 E.04544 G3 X-47.021 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-48.004 Y-11.592 I4.256 J-5.381 E.04544 G2 X-49.642 Y-11.811 I-1.024 J1.426 E.05707 G2 X-50.624 Y-10.86 I4.256 J5.381 E.04544 G3 X-52.262 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-53.245 Y-11.592 I4.256 J-5.381 E.04544 G2 X-54.883 Y-11.811 I-1.024 J1.426 E.05707 G2 X-55.866 Y-10.86 I4.256 J5.381 E.04544 G3 X-57.504 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-58.486 Y-11.592 I4.256 J-5.381 E.04544 G2 X-60.124 Y-11.811 I-1.024 J1.426 E.05707 G2 X-61.107 Y-10.86 I4.256 J5.381 E.04544 G3 X-62.745 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-63.728 Y-11.592 I4.256 J-5.381 E.04544 G2 X-65.365 Y-11.811 I-1.024 J1.426 E.05707 G2 X-66.348 Y-10.86 I4.256 J5.381 E.04544 G3 X-67.986 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-68.969 Y-11.592 I4.256 J-5.381 E.04544 G2 X-70.607 Y-11.811 I-1.024 J1.426 E.05707 G2 X-71.59 Y-10.86 I4.256 J5.381 E.04544 G3 X-73.227 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-74.21 Y-11.592 I4.256 J-5.381 E.04544 G2 X-75.848 Y-11.811 I-1.024 J1.426 E.05707 G2 X-76.831 Y-10.86 I4.256 J5.381 E.04544 G3 X-78.469 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-79.451 Y-11.592 I4.256 J-5.381 E.04544 G2 X-81.089 Y-11.811 I-1.024 J1.426 E.05707 G2 X-82.072 Y-10.86 I4.256 J5.381 E.04544 G3 X-83.71 Y-10.641 I-1.024 J-1.426 E.05707 G3 X-84.468 Y-11.36 I3.211 J-4.142 E.03471 G1 X-83.81 Y-11.36 E.02182 G1 X-83.81 Y-13.921 E.08494 G2 X-81.745 Y-13.261 I1.451 J-.981 E.07754 G2 X-80.762 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-79.124 Y-14.431 I1.024 J1.426 E.05707 G3 X-78.141 Y-13.48 I-4.256 J5.381 E.04544 G2 X-76.503 Y-13.261 I1.024 J-1.426 E.05707 G2 X-75.52 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-73.883 Y-14.431 I1.024 J1.426 E.05707 G3 X-72.9 Y-13.48 I-4.256 J5.381 E.04544 G2 X-71.262 Y-13.261 I1.024 J-1.426 E.05707 G2 X-70.279 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-68.641 Y-14.431 I1.024 J1.426 E.05707 G3 X-67.659 Y-13.48 I-4.256 J5.381 E.04544 G2 X-66.021 Y-13.261 I1.024 J-1.426 E.05707 G2 X-65.038 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-63.4 Y-14.431 I1.024 J1.426 E.05707 G3 X-62.417 Y-13.48 I-4.256 J5.381 E.04544 G2 X-60.779 Y-13.261 I1.024 J-1.426 E.05707 G2 X-59.797 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-58.159 Y-14.431 I1.024 J1.426 E.05707 G3 X-57.176 Y-13.48 I-4.256 J5.381 E.04544 G2 X-55.538 Y-13.261 I1.024 J-1.426 E.05707 G2 X-54.555 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-52.917 Y-14.431 I1.024 J1.426 E.05707 G3 X-51.935 Y-13.48 I-4.256 J5.381 E.04544 G2 X-50.297 Y-13.261 I1.024 J-1.426 E.05707 G2 X-49.314 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-47.676 Y-14.431 I1.024 J1.426 E.05707 G3 X-46.693 Y-13.48 I-4.256 J5.381 E.04544 G2 X-45.055 Y-13.261 I1.024 J-1.426 E.05707 G2 X-44.073 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-42.435 Y-14.431 I1.024 J1.426 E.05707 G3 X-41.452 Y-13.48 I-4.256 J5.381 E.04544 G2 X-39.814 Y-13.261 I1.024 J-1.426 E.05707 G2 X-38.831 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-37.193 Y-14.431 I1.024 J1.426 E.05707 G3 X-36.211 Y-13.48 I-4.256 J5.381 E.04544 G2 X-34.573 Y-13.261 I1.024 J-1.426 E.05707 G2 X-33.59 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-31.952 Y-14.431 I1.024 J1.426 E.05707 G3 X-30.969 Y-13.48 I-4.256 J5.381 E.04544 G2 X-29.331 Y-13.261 I1.024 J-1.426 E.05707 G2 X-28.349 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-26.711 Y-14.431 I1.024 J1.426 E.05707 G3 X-25.728 Y-13.48 I-4.256 J5.381 E.04544 G2 X-24.09 Y-13.261 I1.024 J-1.426 E.05707 G2 X-23.107 Y-14.212 I-4.256 J-5.381 E.04544 G3 X-21.47 Y-14.431 I1.024 J1.426 E.05707 G3 X-21.09 Y-14.102 I-1.455 J2.058 E.01669 G1 X-21.09 Y-16.114 E.06676 G3 X-21.797 Y-16.833 I3.234 J-3.888 E.03349 G2 X-23.435 Y-17.052 I-1.024 J1.426 E.05707 G2 X-24.418 Y-16.101 I4.256 J5.381 E.04544 G3 X-26.056 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-27.038 Y-16.833 I4.256 J-5.381 E.04544 G2 X-28.676 Y-17.052 I-1.024 J1.426 E.05707 G2 X-29.659 Y-16.101 I4.256 J5.381 E.04544 G3 X-31.297 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-32.28 Y-16.833 I4.256 J-5.381 E.04544 G2 X-33.918 Y-17.052 I-1.024 J1.426 E.05707 G2 X-34.9 Y-16.101 I4.257 J5.381 E.04544 G3 X-36.538 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-37.521 Y-16.833 I4.256 J-5.381 E.04544 G2 X-39.159 Y-17.052 I-1.024 J1.426 E.05707 G2 X-40.142 Y-16.101 I4.257 J5.381 E.04544 G3 X-41.78 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-42.762 Y-16.833 I4.256 J-5.381 E.04544 G2 X-44.4 Y-17.052 I-1.024 J1.426 E.05707 G2 X-45.383 Y-16.101 I4.256 J5.381 E.04544 G3 X-47.021 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-48.004 Y-16.833 I4.256 J-5.381 E.04544 G2 X-49.642 Y-17.052 I-1.024 J1.426 E.05707 G2 X-50.624 Y-16.101 I4.256 J5.381 E.04544 G3 X-52.262 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-53.245 Y-16.833 I4.256 J-5.381 E.04544 G2 X-54.883 Y-17.052 I-1.024 J1.426 E.05707 G2 X-55.866 Y-16.101 I4.256 J5.381 E.04544 G3 X-57.504 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-58.486 Y-16.833 I4.256 J-5.381 E.04544 G2 X-60.124 Y-17.052 I-1.024 J1.426 E.05707 G2 X-61.107 Y-16.101 I4.257 J5.381 E.04544 G3 X-62.745 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-63.728 Y-16.833 I4.256 J-5.381 E.04544 G2 X-65.365 Y-17.052 I-1.024 J1.426 E.05707 G2 X-66.348 Y-16.101 I4.257 J5.381 E.04544 G3 X-67.986 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-68.969 Y-16.833 I4.256 J-5.381 E.04544 G2 X-70.607 Y-17.052 I-1.024 J1.426 E.05707 G2 X-71.59 Y-16.101 I4.257 J5.381 E.04544 G3 X-73.227 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-74.21 Y-16.833 I4.256 J-5.381 E.04544 G2 X-75.848 Y-17.052 I-1.024 J1.426 E.05707 G2 X-76.831 Y-16.101 I4.256 J5.381 E.04544 G3 X-78.469 Y-15.882 I-1.024 J-1.426 E.05707 G3 X-79.451 Y-16.833 I4.256 J-5.381 E.04544 G2 X-81.089 Y-17.052 I-1.024 J1.426 E.05707 G2 X-82.072 Y-16.101 I4.256 J5.381 E.04544 G3 X-83.71 Y-15.882 I-1.024 J-1.426 E.05707 G1 X-83.81 Y-15.966 E.00433 G1 X-83.81 Y-19.162 E.10601 G2 X-81.745 Y-18.503 I1.451 J-.981 E.07754 G2 X-80.762 Y-19.454 I-4.257 J-5.381 E.04544 G3 X-79.124 Y-19.673 I1.024 J1.426 E.05707 G3 X-78.141 Y-18.722 I-4.256 J5.381 E.04544 G2 X-76.503 Y-18.503 I1.024 J-1.426 E.05707 G2 X-75.52 Y-19.454 I-4.256 J-5.381 E.04544 G3 X-73.883 Y-19.673 I1.024 J1.426 E.05707 G3 X-72.9 Y-18.722 I-4.256 J5.381 E.04544 G2 X-71.262 Y-18.503 I1.024 J-1.426 E.05707 G2 X-70.279 Y-19.454 I-4.256 J-5.381 E.04544 G3 X-68.641 Y-19.673 I1.024 J1.426 E.05707 G3 X-67.659 Y-18.722 I-4.256 J5.381 E.04544 G2 X-66.021 Y-18.503 I1.024 J-1.426 E.05707 G2 X-65.038 Y-19.454 I-4.256 J-5.381 E.04544 G3 X-63.4 Y-19.673 I1.024 J1.426 E.05707 G3 X-62.417 Y-18.722 I-4.256 J5.381 E.04544 G2 X-60.779 Y-18.503 I1.024 J-1.426 E.05707 G2 X-59.797 Y-19.454 I-4.256 J-5.381 E.04544 G3 X-58.159 Y-19.673 I1.024 J1.426 E.05707 G3 X-57.176 Y-18.722 I-4.256 J5.381 E.04544 G2 X-55.538 Y-18.503 I1.024 J-1.426 E.05707 G2 X-54.555 Y-19.454 I-4.257 J-5.381 E.04544 G3 X-52.917 Y-19.673 I1.024 J1.426 E.05707 G3 X-51.935 Y-18.722 I-4.256 J5.381 E.04544 G2 X-50.297 Y-18.503 I1.024 J-1.426 E.05707 G2 X-49.314 Y-19.454 I-4.257 J-5.381 E.04544 G3 X-47.676 Y-19.673 I1.024 J1.426 E.05707 G3 X-46.693 Y-18.722 I-4.256 J5.381 E.04544 G2 X-45.055 Y-18.503 I1.024 J-1.426 E.05707 G2 X-44.073 Y-19.454 I-4.256 J-5.381 E.04544 G3 X-42.435 Y-19.673 I1.024 J1.426 E.05707 G3 X-41.452 Y-18.722 I-4.256 J5.381 E.04544 G2 X-39.814 Y-18.503 I1.024 J-1.426 E.05707 G2 X-38.831 Y-19.454 I-4.256 J-5.381 E.04544 G3 X-37.193 Y-19.673 I1.024 J1.426 E.05707 G3 X-36.211 Y-18.722 I-4.256 J5.381 E.04544 G2 X-34.573 Y-18.503 I1.024 J-1.426 E.05707 G2 X-33.59 Y-19.454 I-4.256 J-5.381 E.04544 G3 X-31.952 Y-19.673 I1.024 J1.426 E.05707 G3 X-30.969 Y-18.722 I-4.256 J5.381 E.04544 G2 X-29.331 Y-18.503 I1.024 J-1.426 E.05707 G2 X-28.349 Y-19.454 I-4.257 J-5.381 E.04544 G3 X-26.711 Y-19.673 I1.024 J1.426 E.05707 G3 X-25.728 Y-18.722 I-4.256 J5.381 E.04544 G2 X-24.09 Y-18.503 I1.024 J-1.426 E.05707 G2 X-23.107 Y-19.454 I-4.257 J-5.381 E.04544 G3 X-21.47 Y-19.673 I1.024 J1.426 E.05707 G3 X-21.09 Y-19.343 I-1.455 J2.058 E.01669 G1 X-21.09 Y-21.356 E.06676 G3 X-21.797 Y-22.074 I3.234 J-3.888 E.03349 G2 X-23.435 Y-22.293 I-1.024 J1.426 E.05707 G2 X-24.418 Y-21.342 I4.256 J5.381 E.04544 G3 X-26.056 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-27.038 Y-22.074 I4.256 J-5.381 E.04544 G2 X-28.676 Y-22.293 I-1.024 J1.426 E.05707 G2 X-29.659 Y-21.342 I4.256 J5.381 E.04544 G3 X-31.297 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-32.28 Y-22.074 I4.256 J-5.381 E.04544 G2 X-33.918 Y-22.293 I-1.024 J1.426 E.05707 G2 X-34.9 Y-21.342 I4.256 J5.381 E.04544 G3 X-36.538 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-37.521 Y-22.074 I4.256 J-5.381 E.04544 G2 X-39.159 Y-22.293 I-1.024 J1.426 E.05707 G2 X-40.142 Y-21.342 I4.256 J5.381 E.04544 G3 X-41.78 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-42.762 Y-22.074 I4.256 J-5.381 E.04544 G2 X-44.4 Y-22.293 I-1.024 J1.426 E.05707 G2 X-45.383 Y-21.342 I4.256 J5.381 E.04544 G3 X-47.021 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-48.004 Y-22.074 I4.256 J-5.381 E.04544 G2 X-49.642 Y-22.293 I-1.024 J1.426 E.05707 G2 X-50.624 Y-21.342 I4.256 J5.381 E.04544 G3 X-52.262 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-53.245 Y-22.074 I4.256 J-5.381 E.04544 G2 X-54.883 Y-22.293 I-1.024 J1.426 E.05707 G2 X-55.866 Y-21.342 I4.256 J5.381 E.04544 G3 X-57.504 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-58.486 Y-22.074 I4.256 J-5.381 E.04544 G2 X-60.124 Y-22.293 I-1.024 J1.426 E.05707 G2 X-61.107 Y-21.342 I4.256 J5.381 E.04544 G3 X-62.745 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-63.728 Y-22.074 I4.256 J-5.381 E.04544 G2 X-65.365 Y-22.293 I-1.024 J1.426 E.05707 G2 X-66.348 Y-21.342 I4.256 J5.381 E.04544 G3 X-67.986 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-68.969 Y-22.074 I4.256 J-5.381 E.04544 G2 X-70.607 Y-22.293 I-1.024 J1.426 E.05707 G2 X-71.59 Y-21.342 I4.256 J5.381 E.04544 G3 X-73.227 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-74.21 Y-22.074 I4.256 J-5.381 E.04544 G2 X-75.848 Y-22.293 I-1.024 J1.426 E.05707 G2 X-76.831 Y-21.342 I4.256 J5.381 E.04544 G3 X-78.469 Y-21.123 I-1.024 J-1.426 E.05707 G3 X-79.451 Y-22.074 I4.256 J-5.381 E.04544 G2 X-81.089 Y-22.293 I-1.024 J1.426 E.05707 G2 X-82.072 Y-21.342 I4.256 J5.381 E.04544 G3 X-83.71 Y-21.123 I-1.024 J-1.426 E.05707 G1 X-83.81 Y-21.207 E.00433 G1 X-83.81 Y-24.36 E.10457 G1 X-83.768 Y-24.36 E.0014 G2 X-81.745 Y-23.744 I1.402 J-.976 E.07564 G2 X-81.087 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-78.526 Y-24.36 E.08494 G2 X-76.503 Y-23.744 I1.402 J-.976 E.07564 G2 X-75.846 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-73.285 Y-24.36 E.08494 G2 X-71.262 Y-23.744 I1.402 J-.976 E.07564 G2 X-70.605 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-68.044 Y-24.36 E.08494 G2 X-66.021 Y-23.744 I1.402 J-.976 E.07564 G2 X-65.363 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-62.802 Y-24.36 E.08494 G2 X-60.779 Y-23.744 I1.402 J-.976 E.07564 G2 X-60.122 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-57.561 Y-24.36 E.08494 G2 X-55.538 Y-23.744 I1.402 J-.976 E.07564 G2 X-54.881 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-52.32 Y-24.36 E.08494 G2 X-50.297 Y-23.744 I1.402 J-.976 E.07564 G2 X-49.639 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-47.079 Y-24.36 E.08494 G2 X-45.055 Y-23.744 I1.402 J-.976 E.07564 G2 X-44.398 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-41.837 Y-24.36 E.08494 G2 X-39.814 Y-23.744 I1.402 J-.976 E.07564 G2 X-39.157 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-36.596 Y-24.36 E.08494 G2 X-34.573 Y-23.744 I1.402 J-.976 E.07564 G2 X-33.915 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-31.355 Y-24.36 E.08494 G2 X-29.331 Y-23.744 I1.402 J-.976 E.07564 G2 X-28.674 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-26.113 Y-24.36 E.08494 G2 X-24.09 Y-23.744 I1.402 J-.976 E.07564 G2 X-23.433 Y-24.36 I-2.746 J-3.59 E.02993 G1 X-21.804 Y-24.36 E.05401 G1 X-20.296 Y-3.348 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-20.296 Y-1.544 E.04996 G1 X-20.277 Y-1.454 E.00256 G1 X-15.194 Y-1.454 E.14083 G1 X-15.104 Y-1.473 E.00256 G1 X-15.104 Y-3.081 E.04457 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-15.104 Y-1.473 G1 X-15.194 Y-1.454 G1 X-15.493 Y-1.454 ;WIPE_END G1 X-20.296 Y-5.557 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.296 Y-3.886 E.04632 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.775 Y-7.546 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.296 Y-7.53 E.01445 G1 X-20.296 Y-6.123 E.039 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.669 Y-9.306 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-43.418 Y-9.286 I-.838 J3.136 E.05874 G1 X-44.073 Y-8.971 E.02411 G3 X-45.055 Y-8.02 I-5.239 J-4.43 E.04544 G3 X-46.693 Y-8.239 I-.614 J-1.645 E.05707 G2 X-47.676 Y-9.19 I-5.239 J4.43 E.04544 G2 X-49.314 Y-8.971 I-.614 J1.645 E.05707 G3 X-50.297 Y-8.02 I-5.239 J-4.43 E.04544 G3 X-51.935 Y-8.239 I-.614 J-1.645 E.05707 G2 X-52.917 Y-9.19 I-5.239 J4.43 E.04544 G2 X-54.555 Y-8.971 I-.614 J1.645 E.05707 G3 X-55.538 Y-8.02 I-5.239 J-4.43 E.04544 G3 X-57.176 Y-8.239 I-.614 J-1.645 E.05707 G1 X-57.831 Y-8.914 E.0312 G2 X-58.486 Y-9.315 I-.9 J.735 E.02597 G2 X-60.333 Y-8.418 I-.104 J2.136 E.07102 G3 X-59.707 Y-6.69 I-2.487 J1.878 E.0619 G1 X-59.141 Y-6.665 E.01878 G1 X-58.486 Y-6.35 E.02411 G2 X-57.504 Y-5.399 I5.239 J-4.43 E.04544 G2 X-55.866 Y-5.618 I.614 J-1.645 E.05707 G3 X-54.883 Y-6.569 I5.239 J4.43 E.04544 G3 X-53.245 Y-6.35 I.614 J1.645 E.05707 G2 X-52.262 Y-5.399 I5.239 J-4.43 E.04544 G2 X-50.624 Y-5.618 I.614 J-1.645 E.05707 G3 X-49.642 Y-6.569 I5.239 J4.43 E.04544 G3 X-48.004 Y-6.35 I.614 J1.645 E.05707 G2 X-47.021 Y-5.399 I5.239 J-4.43 E.04544 G2 X-45.383 Y-5.618 I.614 J-1.645 E.05707 G1 X-45.085 Y-5.925 E.01419 G2 X-44.209 Y-4.581 I2.669 J-.782 E.05398 G1 X-43.684 Y-4.566 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-43.095 Y-4.319 E.0177 G1 X-42.462 Y-4.233 E.0177 G1 X-41.828 Y-4.313 E.0177 G1 X-41.236 Y-4.555 E.0177 G1 X-40.728 Y-4.941 E.0177 G1 X-40.336 Y-5.446 E.0177 G1 X-40.089 Y-6.035 E.0177 G1 X-40.003 Y-6.668 E.0177 G1 X-40.083 Y-7.302 E.0177 G1 X-40.319 Y-7.884 E.0174 G1 X-40.695 Y-8.373 E.01709 G1 X-41.215 Y-8.793 E.01854 G1 X-41.805 Y-9.041 E.01773 G1 X-42.438 Y-9.127 E.0177 G1 X-43.061 Y-9.05 E.0174 G1 X-43.663 Y-8.805 E.01801 G1 X-44.172 Y-8.419 E.01771 G1 X-44.564 Y-7.914 E.0177 G1 X-44.808 Y-7.336 E.0174 G1 X-44.897 Y-6.692 E.01801 G1 X-44.817 Y-6.058 E.0177 G1 X-44.581 Y-5.476 E.0174 G1 X-44.189 Y-4.958 E.01801 G1 X-43.716 Y-4.591 E.0166 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.236 Y-4.555 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-60.728 Y-4.941 E.0177 G1 X-60.336 Y-5.446 E.0177 G1 X-60.089 Y-6.035 E.0177 G1 X-60.003 Y-6.668 E.0177 G1 X-60.083 Y-7.302 E.0177 G1 X-60.319 Y-7.884 E.0174 G1 X-60.695 Y-8.373 E.01709 G1 X-61.215 Y-8.793 E.01854 G1 X-61.805 Y-9.041 E.01773 G1 X-62.438 Y-9.127 E.0177 G1 X-63.061 Y-9.05 E.0174 G1 X-63.663 Y-8.805 E.01801 G1 X-64.172 Y-8.419 E.01771 G1 X-64.564 Y-7.914 E.0177 G1 X-64.808 Y-7.336 E.0174 G1 X-64.897 Y-6.692 E.01801 G1 X-64.817 Y-6.058 E.0177 G1 X-64.581 Y-5.476 E.0174 G1 X-64.189 Y-4.958 E.01801 G1 X-63.684 Y-4.566 E.0177 G1 X-63.095 Y-4.319 E.0177 G1 X-62.462 Y-4.233 E.0177 G1 X-61.828 Y-4.313 E.0177 G1 X-61.273 Y-4.539 E.01659 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.706 Y7.654 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-73.796 Y7.673 E.00256 G1 X-73.796 Y32.256 E.68109 G1 X-73.777 Y32.346 E.00256 G1 X-31.194 Y32.346 E1.17979 G1 X-31.104 Y32.327 E.00256 G1 X-31.104 Y7.744 E.68109 G1 X-31.123 Y7.654 E.00256 G1 X-73.666 Y7.654 E1.17868 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.09 Y18.351 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-74.09 Y19.98 E.05401 G2 X-75.52 Y19.512 I-1.312 J1.592 E.05109 G1 X-75.848 Y19.637 E.01163 G2 X-76.831 Y20.588 I4.256 J5.381 E.04544 G3 X-78.141 Y20.932 I-1.057 J-1.361 E.04618 G1 X-78.469 Y20.807 E.01163 G3 X-79.451 Y19.856 I4.256 J-5.381 E.04544 G2 X-80.762 Y19.512 I-1.057 J1.361 E.04618 G1 X-81.089 Y19.637 E.01163 G2 X-82.072 Y20.588 I4.256 J5.381 E.04544 G3 X-83.382 Y20.932 I-1.057 J-1.361 E.04618 G3 X-84.31 Y20.251 I.748 J-1.99 E.03865 G1 X-84.31 Y22.304 E.06813 G3 X-83.382 Y23.209 I-4.051 J5.081 E.04304 G2 X-82.072 Y23.553 I1.057 J-1.361 E.04618 G1 X-81.745 Y23.428 E.01163 G2 X-80.762 Y22.477 I-4.256 J-5.381 E.04544 G3 X-79.451 Y22.133 I1.057 J1.361 E.04618 G1 X-79.124 Y22.258 E.01163 G3 X-78.141 Y23.209 I-4.256 J5.381 E.04544 G2 X-76.831 Y23.553 I1.057 J-1.361 E.04618 G1 X-76.503 Y23.428 E.01163 G2 X-75.52 Y22.477 I-4.256 J-5.381 E.04544 G3 X-74.21 Y22.133 I1.057 J1.361 E.04618 G1 X-74.09 Y22.179 E.00426 G1 X-74.09 Y23.807 E.05401 G1 X-74.09 Y28.834 F30000 G1 F16200 G1 X-74.09 Y30.462 E.05401 G2 X-75.52 Y29.995 I-1.312 J1.592 E.05109 G1 X-75.848 Y30.12 E.01163 G2 X-76.831 Y31.071 I4.256 J5.381 E.04544 G3 X-78.141 Y31.414 I-1.057 J-1.361 E.04618 G1 X-78.469 Y31.29 E.01163 G3 X-79.451 Y30.339 I4.256 J-5.381 E.04544 G2 X-80.762 Y29.995 I-1.057 J1.361 E.04618 G1 X-81.089 Y30.12 E.01163 G2 X-82.072 Y31.071 I4.256 J5.381 E.04544 G3 X-83.382 Y31.414 I-1.057 J-1.361 E.04618 G1 X-83.71 Y31.29 E.01163 G3 X-84.693 Y30.339 I4.256 J-5.381 E.04544 G2 X-86.003 Y29.995 I-1.057 J1.361 E.04618 G1 X-86.331 Y30.12 E.01163 G2 X-87.313 Y31.071 I4.256 J5.381 E.04544 G3 X-88.624 Y31.414 I-1.057 J-1.361 E.04618 G1 X-88.951 Y31.29 E.01163 G3 X-89.934 Y30.339 I4.256 J-5.381 E.04544 G1 X-90.31 Y30.158 E.01383 G1 X-90.31 Y32.632 E.08207 G3 X-89.607 Y32.74 I.227 J.869 E.02427 G3 X-88.624 Y33.691 I-4.256 J5.381 E.04544 G2 X-87.313 Y34.035 I1.057 J-1.361 E.04618 G1 X-86.986 Y33.911 E.01163 G2 X-86.003 Y32.959 I-4.256 J-5.381 E.04544 G3 X-84.693 Y32.616 I1.057 J1.361 E.04618 G1 X-84.365 Y32.74 E.01163 G3 X-83.382 Y33.691 I-4.256 J5.381 E.04544 G2 X-82.072 Y34.035 I1.057 J-1.361 E.04618 G1 X-81.745 Y33.911 E.01163 G2 X-80.762 Y32.959 I-4.256 J-5.381 E.04544 G3 X-79.451 Y32.616 I1.057 J1.361 E.04618 G1 X-79.124 Y32.74 E.01163 G3 X-78.141 Y33.691 I-4.256 J5.381 E.04544 G2 X-76.831 Y34.035 I1.057 J-1.361 E.04618 G1 X-76.503 Y33.911 E.01163 G2 X-75.52 Y32.959 I-4.256 J-5.381 E.04544 G3 X-74.21 Y32.616 I1.057 J1.361 E.04618 G1 X-73.883 Y32.74 E.01163 G3 X-72.9 Y33.691 I-4.256 J5.381 E.04544 G2 X-71.59 Y34.035 I1.057 J-1.361 E.04618 G1 X-71.262 Y33.911 E.01163 G2 X-70.279 Y32.959 I-4.256 J-5.381 E.04544 G3 X-68.641 Y32.74 I1.041 J1.549 E.05679 G3 X-67.659 Y33.691 I-4.256 J5.381 E.04544 G2 X-66.348 Y34.035 I1.057 J-1.361 E.04618 G1 X-66.021 Y33.911 E.01163 G2 X-65.038 Y32.959 I-4.256 J-5.381 E.04544 G3 X-63.4 Y32.74 I1.041 J1.549 E.05679 G3 X-62.417 Y33.691 I-4.256 J5.381 E.04544 G2 X-61.107 Y34.035 I1.057 J-1.361 E.04618 G1 X-60.779 Y33.911 E.01163 G2 X-59.797 Y32.959 I-4.256 J-5.381 E.04544 G3 X-58.159 Y32.74 I1.041 J1.549 E.05679 G3 X-57.176 Y33.691 I-4.256 J5.381 E.04544 G2 X-55.866 Y34.035 I1.057 J-1.361 E.04618 G1 X-55.538 Y33.911 E.01163 G2 X-54.555 Y32.959 I-4.256 J-5.381 E.04544 G3 X-52.917 Y32.74 I1.041 J1.549 E.05679 G3 X-51.935 Y33.691 I-4.256 J5.381 E.04544 G2 X-50.624 Y34.035 I1.057 J-1.361 E.04618 G1 X-50.297 Y33.911 E.01163 G2 X-49.314 Y32.959 I-4.256 J-5.381 E.04544 G3 X-47.676 Y32.74 I1.041 J1.549 E.05679 G3 X-46.693 Y33.691 I-4.256 J5.381 E.04544 G2 X-45.383 Y34.035 I1.057 J-1.361 E.04618 G1 X-45.055 Y33.911 E.01163 G2 X-44.073 Y32.959 I-4.256 J-5.381 E.04544 G3 X-42.435 Y32.74 I1.041 J1.549 E.05679 G3 X-41.452 Y33.691 I-4.256 J5.381 E.04544 G2 X-40.142 Y34.035 I1.057 J-1.361 E.04618 G1 X-39.814 Y33.911 E.01163 G2 X-38.831 Y32.959 I-4.256 J-5.381 E.04544 G3 X-37.193 Y32.74 I1.041 J1.549 E.05679 G3 X-36.211 Y33.691 I-4.256 J5.381 E.04544 G2 X-34.9 Y34.035 I1.057 J-1.361 E.04618 G1 X-34.573 Y33.911 E.01163 G2 X-33.59 Y32.959 I-4.256 J-5.381 E.04544 G3 X-31.952 Y32.74 I1.041 J1.549 E.05679 G3 X-30.969 Y33.691 I-4.256 J5.381 E.04544 G2 X-29.659 Y34.035 I1.057 J-1.361 E.04618 G1 X-29.331 Y33.911 E.01163 G2 X-28.349 Y32.959 I-4.256 J-5.381 E.04544 G3 X-27.038 Y32.616 I1.057 J1.361 E.04618 G1 X-26.711 Y32.74 E.01163 G3 X-25.728 Y33.691 I-4.256 J5.381 E.04544 G2 X-24.418 Y34.035 I1.057 J-1.361 E.04618 G1 X-24.09 Y33.911 E.01163 G2 X-23.107 Y32.959 I-4.256 J-5.381 E.04544 G3 X-21.797 Y32.616 I1.057 J1.361 E.04618 G1 X-21.47 Y32.74 E.01163 G3 X-20.487 Y33.691 I-4.256 J5.381 E.04544 G2 X-19.176 Y34.035 I1.057 J-1.361 E.04618 G1 X-18.849 Y33.911 E.01163 G2 X-17.866 Y32.959 I-4.256 J-5.381 E.04544 G3 X-16.556 Y32.616 I1.057 J1.361 E.04618 G1 X-16.228 Y32.74 E.01163 G3 X-15.245 Y33.691 I-4.256 J5.381 E.04544 G1 X-14.59 Y34.006 E.02412 G1 X-14.59 Y36.627 E.08693 G1 X-15.245 Y36.656 E.02176 G1 X-15.573 Y36.531 E.01163 G3 X-16.556 Y35.58 I4.256 J-5.381 E.04544 G2 X-17.866 Y35.236 I-1.057 J1.361 E.04618 G1 X-18.194 Y35.361 E.01163 G2 X-19.176 Y36.312 I4.256 J5.381 E.04544 G3 X-20.487 Y36.656 I-1.057 J-1.361 E.04618 G1 X-20.814 Y36.531 E.01163 G3 X-21.797 Y35.58 I4.256 J-5.381 E.04544 G2 X-23.107 Y35.236 I-1.057 J1.361 E.04618 G1 X-23.435 Y35.361 E.01163 G2 X-24.418 Y36.312 I4.256 J5.381 E.04544 G3 X-25.728 Y36.656 I-1.057 J-1.361 E.04618 G1 X-26.056 Y36.531 E.01163 G3 X-27.038 Y35.58 I4.256 J-5.381 E.04544 G2 X-28.349 Y35.236 I-1.057 J1.361 E.04618 G1 X-28.676 Y35.361 E.01163 G2 X-29.659 Y36.312 I4.256 J5.381 E.04544 G3 X-30.969 Y36.656 I-1.057 J-1.361 E.04618 G1 X-31.297 Y36.531 E.01163 G3 X-32.28 Y35.58 I4.256 J-5.381 E.04544 G2 X-33.59 Y35.236 I-1.057 J1.361 E.04618 G1 X-33.918 Y35.361 E.01163 G2 X-34.9 Y36.312 I4.256 J5.381 E.04544 G3 X-36.211 Y36.656 I-1.057 J-1.361 E.04618 G1 X-36.538 Y36.531 E.01163 G3 X-37.521 Y35.58 I4.256 J-5.381 E.04544 G2 X-38.831 Y35.236 I-1.057 J1.361 E.04618 G1 X-39.159 Y35.361 E.01163 G2 X-40.142 Y36.312 I4.256 J5.381 E.04544 G3 X-41.452 Y36.656 I-1.057 J-1.361 E.04618 G1 X-41.78 Y36.531 E.01163 G3 X-42.762 Y35.58 I4.256 J-5.381 E.04544 G2 X-44.073 Y35.236 I-1.057 J1.361 E.04618 G1 X-44.4 Y35.361 E.01163 G2 X-45.383 Y36.312 I4.256 J5.381 E.04544 G3 X-46.693 Y36.656 I-1.057 J-1.361 E.04618 G1 X-47.021 Y36.531 E.01163 G3 X-48.004 Y35.58 I4.256 J-5.381 E.04544 G2 X-49.314 Y35.236 I-1.057 J1.361 E.04618 G1 X-49.642 Y35.361 E.01163 G2 X-50.624 Y36.312 I4.256 J5.381 E.04544 G3 X-51.935 Y36.656 I-1.057 J-1.361 E.04618 G1 X-52.262 Y36.531 E.01163 G3 X-53.245 Y35.58 I4.256 J-5.381 E.04544 G2 X-54.555 Y35.236 I-1.057 J1.361 E.04618 G1 X-54.883 Y35.361 E.01163 G2 X-55.866 Y36.312 I4.256 J5.381 E.04544 G3 X-57.176 Y36.656 I-1.057 J-1.361 E.04618 G1 X-57.504 Y36.531 E.01163 G3 X-58.486 Y35.58 I4.256 J-5.381 E.04544 G2 X-59.797 Y35.236 I-1.057 J1.361 E.04618 G1 X-60.124 Y35.361 E.01163 G2 X-61.107 Y36.312 I4.256 J5.381 E.04544 G3 X-62.417 Y36.656 I-1.057 J-1.361 E.04618 G1 X-62.745 Y36.531 E.01163 G3 X-63.728 Y35.58 I4.256 J-5.381 E.04544 G2 X-65.038 Y35.236 I-1.057 J1.361 E.04618 G1 X-65.365 Y35.361 E.01163 G2 X-66.348 Y36.312 I4.256 J5.381 E.04544 G3 X-67.659 Y36.656 I-1.057 J-1.361 E.04618 G1 X-67.986 Y36.531 E.01163 G3 X-68.969 Y35.58 I4.256 J-5.381 E.04544 G2 X-70.279 Y35.236 I-1.057 J1.361 E.04618 G1 X-70.607 Y35.361 E.01163 G2 X-71.59 Y36.312 I4.256 J5.381 E.04544 G3 X-72.9 Y36.656 I-1.057 J-1.361 E.04618 G1 X-73.227 Y36.531 E.01163 G3 X-74.21 Y35.58 I4.256 J-5.381 E.04544 G2 X-75.52 Y35.236 I-1.057 J1.361 E.04618 G1 X-75.848 Y35.361 E.01163 G2 X-76.831 Y36.312 I4.256 J5.381 E.04544 G3 X-78.141 Y36.656 I-1.057 J-1.361 E.04618 G1 X-78.469 Y36.531 E.01163 G3 X-79.451 Y35.58 I4.256 J-5.381 E.04544 G2 X-80.762 Y35.236 I-1.057 J1.361 E.04618 G1 X-81.089 Y35.361 E.01163 G2 X-82.072 Y36.312 I4.256 J5.381 E.04544 G3 X-83.382 Y36.656 I-1.057 J-1.361 E.04618 G1 X-83.71 Y36.531 E.01163 G3 X-84.693 Y35.58 I4.256 J-5.381 E.04544 G2 X-86.003 Y35.236 I-1.057 J1.361 E.04618 G1 X-86.331 Y35.361 E.01163 G2 X-87.313 Y36.312 I4.256 J5.381 E.04544 G3 X-88.624 Y36.656 I-1.057 J-1.361 E.04618 G1 X-88.951 Y36.531 E.01163 G3 X-89.934 Y35.58 I4.256 J-5.381 E.04544 G1 X-90.31 Y35.4 E.01383 G1 X-90.31 Y37.874 E.08207 G3 X-89.607 Y37.982 I.227 J.869 E.02427 G3 X-88.624 Y38.933 I-4.256 J5.381 E.04544 G2 X-87.313 Y39.276 I1.057 J-1.361 E.04618 G1 X-86.986 Y39.152 E.01163 G2 X-86.003 Y38.201 I-4.256 J-5.381 E.04544 G3 X-84.693 Y37.857 I1.057 J1.361 E.04618 G1 X-84.365 Y37.982 E.01163 G3 X-83.382 Y38.933 I-4.256 J5.381 E.04544 G2 X-82.072 Y39.276 I1.057 J-1.361 E.04618 G1 X-81.745 Y39.152 E.01163 G2 X-80.762 Y38.201 I-4.256 J-5.381 E.04544 G3 X-79.451 Y37.857 I1.057 J1.361 E.04618 G1 X-79.124 Y37.982 E.01163 G3 X-78.141 Y38.933 I-4.256 J5.381 E.04544 G2 X-76.831 Y39.276 I1.057 J-1.361 E.04618 G1 X-76.503 Y39.152 E.01163 G2 X-75.52 Y38.201 I-4.256 J-5.381 E.04544 G3 X-74.21 Y37.857 I1.057 J1.361 E.04618 G1 X-73.883 Y37.982 E.01163 G3 X-72.9 Y38.933 I-4.256 J5.381 E.04544 G2 X-71.59 Y39.276 I1.057 J-1.361 E.04618 G1 X-71.262 Y39.152 E.01163 G2 X-70.279 Y38.201 I-4.256 J-5.381 E.04544 G3 X-68.969 Y37.857 I1.057 J1.361 E.04618 G1 X-68.641 Y37.982 E.01163 G3 X-67.659 Y38.933 I-4.256 J5.381 E.04544 G2 X-66.348 Y39.276 I1.057 J-1.361 E.04618 G1 X-66.021 Y39.152 E.01163 G2 X-65.038 Y38.201 I-4.256 J-5.381 E.04544 G3 X-63.728 Y37.857 I1.057 J1.361 E.04618 G1 X-63.4 Y37.982 E.01163 G3 X-62.417 Y38.933 I-4.256 J5.381 E.04544 G2 X-61.107 Y39.276 I1.057 J-1.361 E.04618 G1 X-60.779 Y39.152 E.01163 G2 X-59.797 Y38.201 I-4.256 J-5.381 E.04544 G3 X-58.486 Y37.857 I1.057 J1.361 E.04618 G1 X-58.159 Y37.982 E.01163 G3 X-57.176 Y38.933 I-4.256 J5.381 E.04544 G2 X-55.866 Y39.276 I1.057 J-1.361 E.04618 G1 X-55.538 Y39.152 E.01163 G2 X-54.555 Y38.201 I-4.256 J-5.381 E.04544 G3 X-53.245 Y37.857 I1.057 J1.361 E.04618 G1 X-52.917 Y37.982 E.01163 G3 X-51.935 Y38.933 I-4.256 J5.381 E.04544 G2 X-50.624 Y39.276 I1.057 J-1.361 E.04618 G1 X-50.297 Y39.152 E.01163 G2 X-49.314 Y38.201 I-4.256 J-5.381 E.04544 G3 X-48.004 Y37.857 I1.057 J1.361 E.04618 G1 X-47.676 Y37.982 E.01163 G3 X-46.693 Y38.933 I-4.256 J5.381 E.04544 G2 X-45.383 Y39.276 I1.057 J-1.361 E.04618 G1 X-45.055 Y39.152 E.01163 G2 X-44.073 Y38.201 I-4.256 J-5.381 E.04544 G3 X-42.762 Y37.857 I1.057 J1.361 E.04618 G1 X-42.435 Y37.982 E.01163 G3 X-41.452 Y38.933 I-4.256 J5.381 E.04544 G2 X-40.142 Y39.276 I1.057 J-1.361 E.04618 G1 X-39.814 Y39.152 E.01163 G2 X-38.831 Y38.201 I-4.256 J-5.381 E.04544 G3 X-37.521 Y37.857 I1.057 J1.361 E.04618 G1 X-37.193 Y37.982 E.01163 G3 X-36.211 Y38.933 I-4.256 J5.381 E.04544 G2 X-34.9 Y39.276 I1.057 J-1.361 E.04618 G1 X-34.573 Y39.152 E.01163 G2 X-33.59 Y38.201 I-4.256 J-5.381 E.04544 G3 X-32.28 Y37.857 I1.057 J1.361 E.04618 G1 X-31.952 Y37.982 E.01163 G3 X-30.969 Y38.933 I-4.256 J5.381 E.04544 G2 X-29.659 Y39.276 I1.057 J-1.361 E.04618 G1 X-29.331 Y39.152 E.01163 G2 X-28.349 Y38.201 I-4.256 J-5.381 E.04544 G3 X-27.038 Y37.857 I1.057 J1.361 E.04618 G1 X-26.711 Y37.982 E.01163 G3 X-25.728 Y38.933 I-4.256 J5.381 E.04544 G2 X-24.418 Y39.276 I1.057 J-1.361 E.04618 G1 X-24.09 Y39.152 E.01163 G2 X-23.107 Y38.201 I-4.256 J-5.381 E.04544 G3 X-21.797 Y37.857 I1.057 J1.361 E.04618 G1 X-21.47 Y37.982 E.01163 G3 X-20.487 Y38.933 I-4.256 J5.381 E.04544 G2 X-19.176 Y39.276 I1.057 J-1.361 E.04618 G1 X-18.849 Y39.152 E.01163 G2 X-17.866 Y38.201 I-4.256 J-5.381 E.04544 G3 X-16.556 Y37.857 I1.057 J1.361 E.04618 G1 X-16.228 Y37.982 E.01163 G3 X-15.245 Y38.933 I-4.256 J5.381 E.04544 G1 X-14.59 Y39.248 E.02412 G1 X-14.59 Y41.868 E.08693 G1 X-15.245 Y41.897 E.02176 G1 X-15.573 Y41.772 E.01163 G3 X-16.556 Y40.821 I4.256 J-5.381 E.04544 G2 X-17.866 Y40.478 I-1.057 J1.361 E.04618 G1 X-18.194 Y40.602 E.01163 G2 X-19.176 Y41.553 I4.256 J5.381 E.04544 G3 X-20.487 Y41.897 I-1.057 J-1.361 E.04618 G1 X-20.814 Y41.772 E.01163 G3 X-21.797 Y40.821 I4.256 J-5.381 E.04544 G2 X-23.107 Y40.478 I-1.057 J1.361 E.04618 G1 X-23.435 Y40.602 E.01163 G2 X-24.418 Y41.553 I4.256 J5.381 E.04544 G3 X-25.728 Y41.897 I-1.057 J-1.361 E.04618 G1 X-26.056 Y41.772 E.01163 G3 X-27.038 Y40.821 I4.256 J-5.381 E.04544 G2 X-28.349 Y40.478 I-1.057 J1.361 E.04618 G1 X-28.676 Y40.602 E.01163 G2 X-29.659 Y41.553 I4.256 J5.381 E.04544 G1 X-30.173 Y41.8 E.0189 G3 X-29.981 Y44.504 I-2.322 J1.523 E.09392 G2 X-29.331 Y44.393 I.197 J-.807 E.02247 G2 X-28.349 Y43.442 I-4.257 J-5.381 E.04544 G3 X-27.038 Y43.098 I1.057 J1.361 E.04618 G1 X-26.711 Y43.223 E.01163 G3 X-25.728 Y44.174 I-4.256 J5.381 E.04544 G2 X-24.418 Y44.518 I1.057 J-1.361 E.04618 G1 X-24.09 Y44.393 E.01163 G2 X-23.107 Y43.442 I-4.257 J-5.381 E.04544 G3 X-21.797 Y43.098 I1.057 J1.361 E.04618 G1 X-21.47 Y43.223 E.01163 G3 X-20.487 Y44.174 I-4.256 J5.381 E.04544 G2 X-19.176 Y44.518 I1.057 J-1.361 E.04618 G1 X-18.849 Y44.393 E.01163 G2 X-17.866 Y43.442 I-4.257 J-5.381 E.04544 G3 X-16.556 Y43.098 I1.057 J1.361 E.04618 G1 X-16.228 Y43.223 E.01163 G3 X-15.245 Y44.174 I-4.256 J5.381 E.04544 G1 X-14.59 Y44.489 E.02412 G1 X-14.59 Y46.117 E.05401 G1 X-14.453 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.427291 G1 F12000 G1 X-14.398 Y47.515 E.00768 ;WIDTH:0.401919 G3 X-14.373 Y47.659 I-2.181 J.447 E.00429 ;WIDTH:0.358151 G1 X-14.353 Y47.779 E.00311 ;WIDTH:0.318646 G1 X-14.334 Y47.899 E.00272 ;WIDTH:0.279142 G1 X-14.314 Y48.018 E.00233 ;WIDTH:0.257538 G1 X-14.312 Y48.032 E.00025 ;WIDTH:0.232125 G1 X-14.288 Y48.272 E.00371 ;WIDTH:0.184997 G1 X-14.265 Y48.511 E.00278 ;WIDTH:0.144792 G3 X-14.249 Y48.997 I-7.384 J.489 E.00404 G1 X-14.264 Y49.481 E.00402 ;WIDTH:0.178482 G1 X-14.29 Y49.744 E.00292 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.264 Y49.481 ;WIPE_END G1 X-21.07 Y46.026 Z2 F30000 G1 X-31.168 Y40.9 Z2 G1 Z1.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-32.092 Y40.6 I-1.364 J2.631 E.03236 G3 X-32.935 Y40.507 I-.204 J-2.01 E.02835 G1 X-33.59 Y40.478 E.02175 G1 X-33.918 Y40.602 E.01163 G2 X-34.9 Y41.553 I4.257 J5.381 E.04544 G3 X-36.211 Y41.897 I-1.057 J-1.361 E.04618 G1 X-36.538 Y41.772 E.01163 G3 X-37.521 Y40.821 I4.256 J-5.381 E.04544 G2 X-38.831 Y40.478 I-1.057 J1.361 E.04618 G1 X-39.159 Y40.602 E.01163 G2 X-40.142 Y41.553 I4.257 J5.381 E.04544 G3 X-41.452 Y41.897 I-1.057 J-1.361 E.04618 G1 X-41.78 Y41.772 E.01163 G3 X-42.762 Y40.821 I4.256 J-5.381 E.04544 G2 X-44.073 Y40.478 I-1.057 J1.361 E.04618 G1 X-44.4 Y40.602 E.01163 G2 X-45.383 Y41.553 I4.256 J5.381 E.04544 G3 X-46.693 Y41.897 I-1.057 J-1.361 E.04618 G1 X-47.021 Y41.772 E.01163 G3 X-48.004 Y40.821 I4.256 J-5.381 E.04544 G2 X-49.314 Y40.478 I-1.057 J1.361 E.04618 G1 X-49.642 Y40.602 E.01163 G2 X-50.624 Y41.553 I4.256 J5.381 E.04544 G3 X-51.935 Y41.897 I-1.057 J-1.361 E.04618 G1 X-52.262 Y41.772 E.01163 G3 X-53.245 Y40.821 I4.256 J-5.381 E.04544 G2 X-54.555 Y40.478 I-1.057 J1.361 E.04618 G1 X-54.883 Y40.602 E.01163 G2 X-55.866 Y41.553 I4.256 J5.381 E.04544 G3 X-57.176 Y41.897 I-1.057 J-1.361 E.04618 G1 X-57.504 Y41.772 E.01163 G3 X-58.486 Y40.821 I4.256 J-5.381 E.04544 G2 X-59.797 Y40.478 I-1.057 J1.361 E.04618 G1 X-60.124 Y40.602 E.01163 G2 X-61.107 Y41.553 I4.257 J5.381 E.04544 G3 X-62.417 Y41.897 I-1.057 J-1.361 E.04618 G1 X-62.745 Y41.772 E.01163 G3 X-63.728 Y40.821 I4.256 J-5.381 E.04544 G2 X-65.038 Y40.478 I-1.057 J1.361 E.04618 G1 X-65.365 Y40.602 E.01163 G2 X-66.348 Y41.553 I4.257 J5.381 E.04544 G3 X-67.659 Y41.897 I-1.057 J-1.361 E.04618 G1 X-67.986 Y41.772 E.01163 G3 X-68.969 Y40.821 I4.256 J-5.381 E.04544 G2 X-70.279 Y40.478 I-1.057 J1.361 E.04618 G2 X-71.029 Y40.976 I.608 J1.729 E.03019 G3 X-69.716 Y43.171 I-1.4 J2.328 E.08835 G1 X-68.969 Y43.098 E.0249 G1 X-68.641 Y43.223 E.01163 G3 X-67.659 Y44.174 I-4.256 J5.381 E.04544 G2 X-66.348 Y44.518 I1.057 J-1.361 E.04618 G1 X-66.021 Y44.393 E.01163 G2 X-65.038 Y43.442 I-4.256 J-5.381 E.04544 G3 X-63.728 Y43.098 I1.057 J1.361 E.04618 G1 X-63.4 Y43.223 E.01163 G3 X-62.417 Y44.174 I-4.256 J5.381 E.04544 G2 X-61.107 Y44.518 I1.057 J-1.361 E.04618 G1 X-60.779 Y44.393 E.01163 G2 X-59.797 Y43.442 I-4.256 J-5.381 E.04544 G3 X-58.486 Y43.098 I1.057 J1.361 E.04618 G1 X-58.159 Y43.223 E.01163 G3 X-57.176 Y44.174 I-4.256 J5.381 E.04544 G2 X-55.866 Y44.518 I1.057 J-1.361 E.04618 G1 X-55.538 Y44.393 E.01163 G2 X-54.555 Y43.442 I-4.257 J-5.381 E.04544 G3 X-53.245 Y43.098 I1.057 J1.361 E.04618 G1 X-52.917 Y43.223 E.01163 G3 X-51.935 Y44.174 I-4.256 J5.381 E.04544 G2 X-50.624 Y44.518 I1.057 J-1.361 E.04618 G1 X-50.297 Y44.393 E.01163 G2 X-49.314 Y43.442 I-4.257 J-5.381 E.04544 G3 X-48.004 Y43.098 I1.057 J1.361 E.04618 G1 X-47.676 Y43.223 E.01163 G3 X-46.693 Y44.174 I-4.256 J5.381 E.04544 G2 X-45.383 Y44.518 I1.057 J-1.361 E.04618 G1 X-45.055 Y44.393 E.01163 G2 X-44.073 Y43.442 I-4.256 J-5.381 E.04544 G3 X-42.762 Y43.098 I1.057 J1.361 E.04618 G1 X-42.435 Y43.223 E.01163 G3 X-41.452 Y44.174 I-4.256 J5.381 E.04544 G2 X-40.142 Y44.518 I1.057 J-1.361 E.04618 G1 X-39.814 Y44.393 E.01163 G2 X-38.831 Y43.442 I-4.256 J-5.381 E.04544 G3 X-37.521 Y43.098 I1.057 J1.361 E.04618 G1 X-37.193 Y43.223 E.01163 G3 X-36.211 Y44.174 I-4.256 J5.381 E.04544 G2 X-34.912 Y44.517 I1.051 J-1.348 E.04578 G3 X-35.165 Y42.933 I3.376 J-1.35 E.05365 G1 X-33.66 Y41.203 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-34.142 Y41.566 E.01672 G1 X-34.556 Y42.091 E.01852 G1 X-34.802 Y42.679 E.01765 G1 X-34.887 Y43.276 E.01672 G1 X-34.818 Y43.941 E.01852 G1 X-34.575 Y44.534 E.01773 G1 X-34.189 Y45.042 E.0177 G1 X-33.684 Y45.434 E.0177 G1 X-33.095 Y45.681 E.0177 G1 X-32.462 Y45.767 E.0177 G1 X-31.828 Y45.687 E.0177 G1 X-31.246 Y45.451 E.0174 G1 X-30.728 Y45.059 E.018 G1 X-30.336 Y44.554 E.0177 G1 X-30.094 Y43.98 E.01725 G1 X-30.013 Y43.364 E.01723 G1 X-30.089 Y42.675 E.01919 G1 X-30.325 Y42.106 E.01706 G1 X-30.711 Y41.598 E.0177 G1 X-31.216 Y41.206 E.0177 G1 X-31.805 Y40.959 E.0177 G1 X-32.438 Y40.873 E.0177 G1 X-33.061 Y40.95 E.0174 G1 X-33.623 Y41.188 E.0169 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.81 Y29.779 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-30.81 Y31.407 E.05401 G1 X-30.314 Y31.386 E.01645 G1 X-29.659 Y31.071 E.02411 G3 X-28.676 Y30.12 I5.239 J4.43 E.04544 G1 X-28.349 Y29.995 E.01163 G3 X-27.038 Y30.339 I.253 J1.705 E.04618 G2 X-26.056 Y31.29 I5.239 J-4.43 E.04544 G1 X-25.728 Y31.414 E.01163 G2 X-24.418 Y31.071 I.253 J-1.705 E.04618 G3 X-23.435 Y30.12 I5.239 J4.43 E.04544 G1 X-23.107 Y29.995 E.01163 G3 X-21.797 Y30.339 I.253 J1.705 E.04618 G2 X-20.814 Y31.29 I5.239 J-4.43 E.04544 G1 X-20.487 Y31.414 E.01163 G2 X-19.176 Y31.071 I.253 J-1.705 E.04618 G3 X-18.194 Y30.12 I5.239 J4.43 E.04544 G1 X-17.866 Y29.995 E.01163 G3 X-16.556 Y30.339 I.253 J1.705 E.04618 G2 X-15.573 Y31.29 I5.239 J-4.43 E.04544 G1 X-15.245 Y31.414 E.01163 G1 X-14.59 Y31.386 E.02176 G1 X-14.59 Y28.765 E.08693 G1 X-15.245 Y28.45 E.02412 G2 X-16.228 Y27.499 I-5.239 J4.43 E.04544 G1 X-16.556 Y27.374 E.01163 G2 X-17.866 Y27.718 I-.253 J1.705 E.04618 G3 X-18.849 Y28.669 I-5.239 J-4.43 E.04544 G1 X-19.176 Y28.794 E.01163 G3 X-20.487 Y28.45 I-.253 J-1.705 E.04618 G2 X-21.47 Y27.499 I-5.239 J4.43 E.04544 G1 X-21.797 Y27.374 E.01163 G2 X-23.107 Y27.718 I-.253 J1.705 E.04618 G3 X-24.09 Y28.669 I-5.239 J-4.43 E.04544 G1 X-24.418 Y28.794 E.01163 G3 X-25.728 Y28.45 I-.253 J-1.705 E.04618 G2 X-26.711 Y27.499 I-5.239 J4.43 E.04544 G1 X-27.038 Y27.374 E.01163 G2 X-28.349 Y27.718 I-.253 J1.705 E.04618 G3 X-29.331 Y28.669 I-5.239 J-4.43 E.04544 G1 X-29.659 Y28.794 E.01163 G3 X-30.81 Y28.527 I-.263 J-1.48 E.04027 G1 X-30.81 Y26.166 E.07831 G1 X-30.314 Y26.144 E.01645 G1 X-29.659 Y25.829 E.02411 G3 X-28.676 Y24.878 I5.239 J4.43 E.04544 G1 X-28.349 Y24.754 E.01163 G3 X-27.038 Y25.097 I.253 J1.705 E.04618 G2 X-26.056 Y26.049 I5.239 J-4.43 E.04544 G1 X-25.728 Y26.173 E.01163 G2 X-24.418 Y25.829 I.253 J-1.705 E.04618 G3 X-23.435 Y24.878 I5.239 J4.43 E.04544 G1 X-23.107 Y24.754 E.01163 G3 X-21.797 Y25.097 I.253 J1.705 E.04618 G2 X-20.59 Y26.134 I2.917 J-2.176 E.0532 G1 X-20.59 Y26.64 E.0168 G1 X-14.81 Y26.64 E.19175 G1 X-14.81 Y24.074 E.08513 G1 X-15.187 Y24.365 E.01581 G1 X-15.187 Y23.237 E.03743 G1 X-14.59 Y23.524 E.02195 G1 X-14.213 Y23.54 E.01252 G1 X-14.213 Y21.481 E.06831 G2 X-14.59 Y21.414 I-.229 J.192 E.0138 G1 X-14.59 Y18.282 E.10388 G1 X-15.245 Y17.968 E.02412 G2 X-16.228 Y17.016 I-5.239 J4.43 E.04544 G1 X-16.556 Y16.892 E.01163 G2 X-17.866 Y17.235 I-.253 J1.705 E.04618 G3 X-18.849 Y18.187 I-5.239 J-4.43 E.04544 G1 X-19.176 Y18.311 E.01163 G3 X-20.487 Y17.968 I-.253 J-1.705 E.04618 G2 X-21.47 Y17.016 I-5.239 J4.43 E.04544 G1 X-21.797 Y16.892 E.01163 G2 X-23.107 Y17.235 I-.253 J1.705 E.04618 G3 X-24.09 Y18.187 I-5.239 J-4.43 E.04544 G1 X-24.418 Y18.311 E.01163 G3 X-25.728 Y17.968 I-.253 J-1.705 E.04618 G2 X-26.711 Y17.016 I-5.239 J4.43 E.04544 G1 X-27.038 Y16.892 E.01163 G2 X-28.349 Y17.235 I-.253 J1.705 E.04618 G3 X-29.331 Y18.187 I-5.239 J-4.43 E.04544 G1 X-29.659 Y18.311 E.01163 G3 X-30.81 Y18.044 I-.263 J-1.48 E.04027 G1 X-30.81 Y15.684 E.07831 G1 X-30.314 Y15.662 E.01645 G1 X-29.659 Y15.347 E.02411 G3 X-28.676 Y14.396 I5.239 J4.43 E.04544 G1 X-28.349 Y14.271 E.01163 G3 X-27.038 Y14.615 I.253 J1.705 E.04618 G2 X-26.056 Y15.566 I5.239 J-4.43 E.04544 G1 X-25.728 Y15.691 E.01163 G2 X-24.418 Y15.347 I.253 J-1.705 E.04618 G3 X-23.435 Y14.396 I5.239 J4.43 E.04544 G1 X-23.107 Y14.271 E.01163 G3 X-21.797 Y14.615 I.253 J1.705 E.04618 G2 X-20.814 Y15.566 I5.239 J-4.43 E.04544 G1 X-20.487 Y15.691 E.01163 G2 X-19.176 Y15.347 I.253 J-1.705 E.04618 G3 X-18.194 Y14.396 I5.239 J4.43 E.04544 G1 X-17.866 Y14.271 E.01163 G3 X-16.556 Y14.615 I.253 J1.705 E.04618 G2 X-15.573 Y15.566 I5.239 J-4.43 E.04544 G1 X-15.245 Y15.691 E.01163 G1 X-14.59 Y15.662 E.02176 G1 X-14.59 Y13.041 E.08693 G1 X-15.245 Y12.726 E.02412 G2 X-16.228 Y11.775 I-5.239 J4.43 E.04544 G1 X-16.556 Y11.651 E.01163 G2 X-17.866 Y11.994 I-.253 J1.705 E.04618 G3 X-18.849 Y12.945 I-5.239 J-4.43 E.04544 G1 X-19.176 Y13.07 E.01163 G3 X-20.487 Y12.726 I-.253 J-1.705 E.04618 G2 X-21.47 Y11.775 I-5.239 J4.43 E.04544 G1 X-21.797 Y11.651 E.01163 G2 X-23.107 Y11.994 I-.253 J1.705 E.04618 G3 X-24.09 Y12.945 I-5.239 J-4.43 E.04544 G1 X-24.418 Y13.07 E.01163 G3 X-25.728 Y12.726 I-.253 J-1.705 E.04618 G2 X-26.711 Y11.775 I-5.239 J4.43 E.04544 G1 X-27.038 Y11.651 E.01163 G2 X-28.349 Y11.994 I-.253 J1.705 E.04618 G3 X-29.331 Y12.945 I-5.239 J-4.43 E.04544 G1 X-29.659 Y13.07 E.01163 G3 X-30.81 Y12.803 I-.263 J-1.48 E.04027 G1 X-30.81 Y10.442 E.07831 G1 X-30.314 Y10.42 E.01645 G1 X-29.659 Y10.106 E.02411 G3 X-28.676 Y9.154 I5.239 J4.43 E.04544 G1 X-28.349 Y9.03 E.01163 G3 X-27.038 Y9.374 I.253 J1.705 E.04618 G2 X-26.056 Y10.325 I5.239 J-4.43 E.04544 G1 X-25.728 Y10.449 E.01163 G2 X-24.418 Y10.106 I.253 J-1.705 E.04618 G3 X-23.435 Y9.154 I5.239 J4.43 E.04544 G1 X-23.107 Y9.03 E.01163 G3 X-21.797 Y9.374 I.253 J1.705 E.04618 G2 X-20.814 Y10.325 I5.239 J-4.43 E.04544 G1 X-20.487 Y10.449 E.01163 G2 X-19.176 Y10.106 I.253 J-1.705 E.04618 G3 X-18.194 Y9.154 I5.239 J4.43 E.04544 G1 X-17.866 Y9.03 E.01163 G3 X-16.556 Y9.374 I.253 J1.705 E.04618 G2 X-15.573 Y10.325 I5.239 J-4.43 E.04544 G1 X-15.245 Y10.449 E.01163 G1 X-14.59 Y10.42 E.02176 G1 X-14.59 Y7.8 E.08693 G1 X-15.245 Y7.485 E.02412 G2 X-16.228 Y6.534 I-5.239 J4.43 E.04544 G1 X-16.556 Y6.409 E.01163 G2 X-17.866 Y6.753 I-.253 J1.705 E.04618 G3 X-18.849 Y7.704 I-5.239 J-4.43 E.04544 G1 X-19.176 Y7.829 E.01163 G3 X-20.487 Y7.485 I-.253 J-1.705 E.04618 G2 X-21.47 Y6.534 I-5.239 J4.43 E.04544 G1 X-21.797 Y6.409 E.01163 G2 X-23.107 Y6.753 I-.253 J1.705 E.04618 G3 X-24.09 Y7.704 I-5.239 J-4.43 E.04544 G1 X-24.418 Y7.829 E.01163 G3 X-25.728 Y7.485 I-.253 J-1.705 E.04618 G2 X-26.711 Y6.534 I-5.239 J4.43 E.04544 G1 X-27.038 Y6.409 E.01163 G2 X-28.349 Y6.753 I-.253 J1.705 E.04618 G3 X-29.331 Y7.704 I-5.239 J-4.43 E.04544 G1 X-29.659 Y7.829 E.01163 G3 X-30.81 Y7.562 I-.263 J-1.48 E.04027 G1 X-30.81 Y7.36 E.0067 G1 X-31.091 Y7.36 E.00932 G2 X-32.28 Y6.409 I-2.202 J1.535 E.0512 G2 X-33.59 Y6.753 I-.253 J1.705 E.04618 G1 X-34.179 Y7.36 E.02806 G1 X-36.332 Y7.36 E.07142 G2 X-37.521 Y6.409 I-2.202 J1.535 E.0512 G2 X-38.831 Y6.753 I-.253 J1.705 E.04618 G1 X-39.42 Y7.36 E.02806 G1 X-41.573 Y7.36 E.07142 G2 X-42.762 Y6.409 I-2.202 J1.535 E.0512 G2 X-44.073 Y6.753 I-.253 J1.705 E.04618 G1 X-44.662 Y7.36 E.02806 G1 X-46.815 Y7.36 E.07142 G2 X-48.004 Y6.409 I-2.202 J1.535 E.0512 G2 X-49.314 Y6.753 I-.253 J1.705 E.04618 G1 X-49.903 Y7.36 E.02806 G1 X-52.056 Y7.36 E.07142 G2 X-53.245 Y6.409 I-2.202 J1.535 E.0512 G2 X-54.555 Y6.753 I-.253 J1.705 E.04618 G1 X-55.144 Y7.36 E.02806 G1 X-57.297 Y7.36 E.07142 G2 X-58.486 Y6.409 I-2.202 J1.535 E.0512 G2 X-59.797 Y6.753 I-.253 J1.705 E.04618 G1 X-60.386 Y7.36 E.02806 G1 X-62.539 Y7.36 E.07142 G2 X-63.728 Y6.409 I-2.202 J1.535 E.0512 G2 X-65.038 Y6.753 I-.253 J1.705 E.04618 G1 X-65.627 Y7.36 E.02806 G1 X-67.78 Y7.36 E.07142 G2 X-68.969 Y6.409 I-2.202 J1.535 E.0512 G2 X-70.279 Y6.753 I-.253 J1.705 E.04618 G1 X-70.868 Y7.36 E.02806 G1 X-73.021 Y7.36 E.07142 G2 X-74.21 Y6.409 I-2.202 J1.535 E.0512 G2 X-75.52 Y6.753 I-.253 J1.705 E.04618 G3 X-76.503 Y7.704 I-5.239 J-4.43 E.04544 G1 X-76.831 Y7.829 E.01163 G3 X-78.141 Y7.485 I-.253 J-1.705 E.04618 G2 X-79.124 Y6.534 I-5.239 J4.43 E.04544 G1 X-79.451 Y6.409 E.01163 G2 X-80.762 Y6.753 I-.253 J1.705 E.04618 G3 X-81.745 Y7.704 I-5.239 J-4.43 E.04544 G1 X-82.072 Y7.829 E.01163 G3 X-83.382 Y7.485 I-.253 J-1.705 E.04618 G2 X-84.365 Y6.534 I-5.239 J4.43 E.04544 G1 X-84.693 Y6.409 E.01163 G2 X-86.003 Y6.753 I-.253 J1.705 E.04618 G3 X-86.986 Y7.704 I-5.239 J-4.43 E.04544 G1 X-87.313 Y7.829 E.01163 G3 X-88.624 Y7.485 I-.253 J-1.705 E.04618 G2 X-89.607 Y6.534 I-5.239 J4.43 E.04544 G2 X-90.31 Y6.426 I-.477 J.761 E.02427 G1 X-90.31 Y3.952 E.08207 G1 X-89.934 Y4.132 E.01383 G2 X-88.951 Y5.083 I5.239 J-4.43 E.04544 G1 X-88.624 Y5.208 E.01163 G2 X-87.313 Y4.864 I.253 J-1.705 E.04618 G3 X-86.331 Y3.913 I5.239 J4.43 E.04544 G1 X-86.003 Y3.789 E.01163 G3 X-84.693 Y4.132 I.253 J1.705 E.04618 G2 X-83.71 Y5.083 I5.239 J-4.43 E.04544 G1 X-83.382 Y5.208 E.01163 G2 X-82.072 Y4.864 I.253 J-1.705 E.04618 G3 X-81.089 Y3.913 I5.239 J4.43 E.04544 G1 X-80.762 Y3.789 E.01163 G3 X-79.451 Y4.132 I.253 J1.705 E.04618 G2 X-78.469 Y5.083 I5.239 J-4.43 E.04544 G1 X-78.141 Y5.208 E.01163 G2 X-76.831 Y4.864 I.253 J-1.705 E.04618 G3 X-75.848 Y3.913 I5.239 J4.43 E.04544 G1 X-75.52 Y3.789 E.01163 G3 X-74.21 Y4.132 I.253 J1.705 E.04618 G2 X-73.227 Y5.083 I5.239 J-4.43 E.04544 G1 X-72.9 Y5.208 E.01163 G2 X-71.59 Y4.864 I.253 J-1.705 E.04618 G3 X-70.607 Y3.913 I5.239 J4.43 E.04544 G1 X-70.279 Y3.789 E.01163 G3 X-68.969 Y4.132 I.253 J1.705 E.04618 G2 X-67.986 Y5.083 I5.239 J-4.43 E.04544 G1 X-67.659 Y5.208 E.01163 G2 X-66.348 Y4.864 I.253 J-1.705 E.04618 G3 X-65.365 Y3.913 I5.239 J4.43 E.04544 G1 X-65.038 Y3.789 E.01163 G3 X-63.728 Y4.132 I.253 J1.705 E.04618 G2 X-62.745 Y5.083 I5.239 J-4.43 E.04544 G1 X-62.417 Y5.208 E.01163 G2 X-61.107 Y4.864 I.253 J-1.705 E.04618 G3 X-60.124 Y3.913 I5.239 J4.43 E.04544 G1 X-59.797 Y3.789 E.01163 G3 X-58.486 Y4.132 I.253 J1.705 E.04618 G2 X-57.504 Y5.083 I5.239 J-4.43 E.04544 G1 X-57.176 Y5.208 E.01163 G2 X-55.866 Y4.864 I.253 J-1.705 E.04618 G3 X-54.883 Y3.913 I5.239 J4.43 E.04544 G1 X-54.555 Y3.789 E.01163 G3 X-53.245 Y4.132 I.253 J1.705 E.04618 G2 X-52.262 Y5.083 I5.239 J-4.43 E.04544 G1 X-51.935 Y5.208 E.01163 G2 X-50.624 Y4.864 I.253 J-1.705 E.04618 G3 X-49.642 Y3.913 I5.239 J4.43 E.04544 G1 X-49.314 Y3.789 E.01163 G3 X-48.004 Y4.132 I.253 J1.705 E.04618 G2 X-47.021 Y5.083 I5.239 J-4.43 E.04544 G1 X-46.693 Y5.208 E.01163 G2 X-45.383 Y4.864 I.253 J-1.705 E.04618 G3 X-44.4 Y3.913 I5.239 J4.43 E.04544 G1 X-44.073 Y3.789 E.01163 G3 X-42.762 Y4.132 I.253 J1.705 E.04618 G2 X-41.78 Y5.083 I5.239 J-4.43 E.04544 G1 X-41.452 Y5.208 E.01163 G2 X-40.142 Y4.864 I.253 J-1.705 E.04618 G3 X-39.159 Y3.913 I5.239 J4.43 E.04544 G1 X-38.831 Y3.789 E.01163 G3 X-37.521 Y4.132 I.253 J1.705 E.04618 G2 X-36.538 Y5.083 I5.239 J-4.43 E.04544 G1 X-36.211 Y5.208 E.01163 G2 X-34.9 Y4.864 I.253 J-1.705 E.04618 G3 X-33.918 Y3.913 I5.239 J4.43 E.04544 G1 X-33.59 Y3.789 E.01163 G3 X-32.28 Y4.132 I.253 J1.705 E.04618 G2 X-31.297 Y5.083 I5.239 J-4.43 E.04544 G1 X-30.969 Y5.208 E.01163 G2 X-29.659 Y4.864 I.253 J-1.705 E.04618 G3 X-28.676 Y3.913 I5.239 J4.43 E.04544 G1 X-28.349 Y3.789 E.01163 G3 X-27.038 Y4.132 I.253 J1.705 E.04618 G2 X-26.056 Y5.083 I5.239 J-4.43 E.04544 G1 X-25.728 Y5.208 E.01163 G2 X-24.418 Y4.864 I.253 J-1.705 E.04618 G3 X-23.435 Y3.913 I5.239 J4.43 E.04544 G1 X-23.107 Y3.789 E.01163 G3 X-21.797 Y4.132 I.253 J1.705 E.04618 G2 X-20.814 Y5.083 I5.239 J-4.43 E.04544 G1 X-20.487 Y5.208 E.01163 G2 X-19.176 Y4.864 I.253 J-1.705 E.04618 G3 X-18.194 Y3.913 I5.239 J4.43 E.04544 G1 X-17.866 Y3.789 E.01163 G3 X-16.556 Y4.132 I.253 J1.705 E.04618 G2 X-15.573 Y5.083 I5.239 J-4.43 E.04544 G1 X-15.245 Y5.208 E.01163 G1 X-14.59 Y5.179 E.02176 G1 X-14.59 Y2.558 E.08693 G1 X-15.245 Y2.244 E.02412 G2 X-16.228 Y1.293 I-5.239 J4.43 E.04544 G1 X-16.556 Y1.168 E.01163 G2 X-17.866 Y1.512 I-.253 J1.705 E.04618 G3 X-18.849 Y2.463 I-5.239 J-4.43 E.04544 G1 X-19.176 Y2.587 E.01163 G3 X-20.487 Y2.244 I-.253 J-1.705 E.04618 G2 X-21.47 Y1.293 I-5.239 J4.43 E.04544 G1 X-21.797 Y1.168 E.01163 G2 X-23.107 Y1.512 I-.253 J1.705 E.04618 G3 X-24.09 Y2.463 I-5.239 J-4.43 E.04544 G1 X-24.418 Y2.587 E.01163 G3 X-25.728 Y2.244 I-.253 J-1.705 E.04618 G2 X-26.711 Y1.293 I-5.239 J4.43 E.04544 G1 X-27.038 Y1.168 E.01163 G2 X-28.349 Y1.512 I-.253 J1.705 E.04618 G3 X-29.331 Y2.463 I-5.239 J-4.43 E.04544 G1 X-29.659 Y2.587 E.01163 G3 X-30.969 Y2.244 I-.253 J-1.705 E.04618 G2 X-31.952 Y1.293 I-5.239 J4.43 E.04544 G1 X-32.28 Y1.168 E.01163 G2 X-33.59 Y1.512 I-.253 J1.705 E.04618 G3 X-34.573 Y2.463 I-5.239 J-4.43 E.04544 G1 X-34.9 Y2.587 E.01163 G3 X-36.211 Y2.244 I-.253 J-1.705 E.04618 G2 X-37.193 Y1.293 I-5.239 J4.43 E.04544 G1 X-37.521 Y1.168 E.01163 G2 X-38.831 Y1.512 I-.253 J1.705 E.04618 G3 X-39.814 Y2.463 I-5.239 J-4.43 E.04544 G1 X-40.142 Y2.587 E.01163 G3 X-41.452 Y2.244 I-.253 J-1.705 E.04618 G2 X-42.435 Y1.293 I-5.239 J4.43 E.04544 G1 X-42.762 Y1.168 E.01163 G2 X-44.073 Y1.512 I-.253 J1.705 E.04618 G3 X-45.055 Y2.463 I-5.239 J-4.43 E.04544 G1 X-45.383 Y2.587 E.01163 G3 X-46.693 Y2.244 I-.253 J-1.705 E.04618 G2 X-47.676 Y1.293 I-5.239 J4.43 E.04544 G1 X-48.004 Y1.168 E.01163 G2 X-49.314 Y1.512 I-.253 J1.705 E.04618 G3 X-50.297 Y2.463 I-5.239 J-4.43 E.04544 G1 X-50.624 Y2.587 E.01163 G3 X-51.935 Y2.244 I-.253 J-1.705 E.04618 G2 X-52.917 Y1.293 I-5.239 J4.43 E.04544 G1 X-53.245 Y1.168 E.01163 G2 X-54.555 Y1.512 I-.253 J1.705 E.04618 G3 X-55.538 Y2.463 I-5.239 J-4.43 E.04544 G1 X-55.866 Y2.587 E.01163 G3 X-57.176 Y2.244 I-.253 J-1.705 E.04618 G2 X-58.159 Y1.293 I-5.239 J4.43 E.04544 G1 X-58.486 Y1.168 E.01163 G2 X-59.797 Y1.512 I-.253 J1.705 E.04618 G3 X-60.779 Y2.463 I-5.239 J-4.43 E.04544 G1 X-61.107 Y2.587 E.01163 G3 X-62.417 Y2.244 I-.253 J-1.705 E.04618 G2 X-63.4 Y1.293 I-5.239 J4.43 E.04544 G1 X-63.728 Y1.168 E.01163 G2 X-65.038 Y1.512 I-.253 J1.705 E.04618 G3 X-66.021 Y2.463 I-5.239 J-4.43 E.04544 G1 X-66.348 Y2.587 E.01163 G3 X-67.659 Y2.244 I-.253 J-1.705 E.04618 G2 X-68.641 Y1.293 I-5.239 J4.43 E.04544 G1 X-68.969 Y1.168 E.01163 G2 X-70.279 Y1.512 I-.253 J1.705 E.04618 G3 X-71.262 Y2.463 I-5.239 J-4.43 E.04544 G1 X-71.59 Y2.587 E.01163 G3 X-72.9 Y2.244 I-.253 J-1.705 E.04618 G2 X-73.883 Y1.293 I-5.239 J4.43 E.04544 G1 X-74.21 Y1.168 E.01163 G2 X-75.52 Y1.512 I-.253 J1.705 E.04618 G3 X-76.503 Y2.463 I-5.239 J-4.43 E.04544 G1 X-76.831 Y2.587 E.01163 G3 X-78.141 Y2.244 I-.253 J-1.705 E.04618 G2 X-79.124 Y1.293 I-5.239 J4.43 E.04544 G1 X-79.451 Y1.168 E.01163 G2 X-80.762 Y1.512 I-.253 J1.705 E.04618 G3 X-81.745 Y2.463 I-5.239 J-4.43 E.04544 G1 X-82.072 Y2.587 E.01163 G3 X-83.382 Y2.244 I-.253 J-1.705 E.04618 G2 X-84.365 Y1.293 I-5.239 J4.43 E.04544 G1 X-84.693 Y1.168 E.01163 G2 X-86.003 Y1.512 I-.253 J1.705 E.04618 G3 X-86.986 Y2.463 I-5.239 J-4.43 E.04544 G1 X-87.313 Y2.587 E.01163 G3 X-88.624 Y2.244 I-.253 J-1.705 E.04618 G2 X-89.607 Y1.293 I-5.239 J4.43 E.04544 G2 X-90.31 Y1.184 I-.477 J.761 E.02427 G1 X-90.31 Y-3.842 E.16673 G1 X-90.648 Y-3.58 E.0142 G1 X-90.687 Y-3.998 E.0139 G1 X-90.015 Y-4.07 E.02242 G1 X-89.713 Y-4.303 E.01265 G1 X-89.713 Y-6.123 E.06036 G1 X-89.934 Y-6.35 E.01052 G1 X-90.687 Y-6.669 E.02712 G1 X-90.687 Y-5.041 E.05401 G1 X-91.209 Y-8.258 F30000 ;TYPE:Gap infill ;WIDTH:0.119134 G1 F12000 G1 X-91.33 Y-8.396 E.00114 ;WIDTH:0.161123 G1 X-91.451 Y-8.534 E.00177 G1 X-91.508 Y-8.744 E.00209 G1 X-91.522 Y-11.294 F30000 ;WIDTH:0.418029 G1 F12000 G1 X-91.088 Y-12.572 E.04129 G1 X-91.522 Y-12.138 F30000 ;WIDTH:0.401722 G1 F12000 G1 X-90.244 Y-12.572 E.03949 G1 X-87.694 Y-12.558 F30000 ;WIDTH:0.161122 G1 F12000 G1 X-87.484 Y-12.501 E.00209 G1 X-87.346 Y-12.38 E.00177 ;WIDTH:0.11913 G1 X-87.208 Y-12.259 E.00114 G1 X-84.576 Y-11.654 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-84.104 Y-11.67 E.01308 G1 X-84.104 Y-24.563 E.35722 G1 X-84.085 Y-24.654 E.00256 G1 X-20.887 Y-24.654 E1.75096 G1 X-20.796 Y-24.635 E.00256 G1 X-20.796 Y-11.744 E.35715 G1 X-20.781 Y-11.669 E.00212 G1 X-20.201 Y-11.655 E.01606 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.81 Y19.297 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-30.81 Y20.925 E.05401 G1 X-30.314 Y20.903 E.01645 G1 X-29.659 Y20.588 E.02411 G3 X-28.676 Y19.637 I5.239 J4.43 E.04544 G1 X-28.349 Y19.512 E.01163 G3 X-27.038 Y19.856 I.253 J1.705 E.04618 G2 X-26.056 Y20.807 I5.239 J-4.43 E.04544 G1 X-25.728 Y20.932 E.01163 G2 X-24.418 Y20.588 I.253 J-1.705 E.04618 G3 X-23.435 Y19.637 I5.239 J4.43 E.04544 G1 X-23.107 Y19.512 E.01163 G3 X-21.797 Y19.856 I.253 J1.705 E.04618 G2 X-20.59 Y20.893 I2.917 J-2.176 E.0532 G1 X-20.59 Y23.102 E.0733 G2 X-21.797 Y22.133 I-2.239 J1.552 E.05206 G2 X-23.107 Y22.477 I-.253 J1.705 E.04618 G3 X-24.09 Y23.428 I-5.239 J-4.43 E.04544 G1 X-24.418 Y23.553 E.01163 G3 X-25.728 Y23.209 I-.253 J-1.705 E.04618 G2 X-26.711 Y22.258 I-5.239 J4.43 E.04544 G1 X-27.038 Y22.133 E.01163 G2 X-28.349 Y22.477 I-.253 J1.705 E.04618 G3 X-29.331 Y23.428 I-5.239 J-4.43 E.04544 G1 X-29.659 Y23.553 E.01163 G3 X-30.81 Y23.286 I-.263 J-1.48 E.04027 G1 X-30.81 Y24.914 E.05401 G1 X-20.296 Y24.936 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-20.296 Y22.751 E.06053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.296 Y22.021 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.296 Y19.744 E.06308 G1 X-20.277 Y19.654 E.00256 G1 X-15.194 Y19.654 E.14083 G1 X-15.104 Y19.673 E.00256 G1 X-15.104 Y21.184 E.04188 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.296 Y21.106 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-14.296 Y-3.208 E.67365 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.296 Y25.745 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.296 Y26.256 E.01413 G1 X-20.277 Y26.346 E.00256 G1 X-15.194 Y26.346 E.14083 G1 X-15.104 Y26.327 E.00256 G1 X-15.104 Y24.705 E.04495 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-15.104 Y26.327 G1 X-15.194 Y26.346 G1 X-15.48 Y26.346 ;WIPE_END G1 X-22.854 Y28.312 Z2 F30000 G1 X-71.216 Y41.206 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-71.805 Y40.959 E.0177 G1 X-72.438 Y40.873 E.0177 G1 X-73.061 Y40.95 E.0174 G1 X-73.66 Y41.203 E.01801 G1 X-74.143 Y41.565 E.01672 G1 X-74.563 Y42.085 E.01853 G1 X-74.811 Y42.675 E.01773 G1 X-74.897 Y43.308 E.0177 G1 X-74.817 Y43.942 E.0177 G1 X-74.575 Y44.534 E.0177 G1 X-74.189 Y45.042 E.0177 G1 X-73.684 Y45.434 E.0177 G1 X-73.095 Y45.681 E.0177 G1 X-72.462 Y45.767 E.0177 G1 X-71.828 Y45.687 E.0177 G1 X-71.246 Y45.451 E.0174 G1 X-70.728 Y45.059 E.018 G1 X-70.336 Y44.554 E.0177 G1 X-70.092 Y43.975 E.0174 G1 X-70.003 Y43.332 E.018 G1 X-70.083 Y42.698 E.0177 G1 X-70.325 Y42.106 E.0177 G1 X-70.711 Y41.598 E.0177 G1 X-71.184 Y41.231 E.01659 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.453 Y40.576 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-73.985 Y41.053 I.031 J2.799 E.05398 G2 X-75.52 Y40.478 I-1.401 J1.403 E.05607 G1 X-75.848 Y40.602 E.01163 G2 X-76.831 Y41.553 I4.256 J5.381 E.04544 G3 X-78.141 Y41.897 I-1.057 J-1.361 E.04618 G1 X-78.469 Y41.772 E.01163 G3 X-79.451 Y40.821 I4.256 J-5.381 E.04544 G2 X-80.762 Y40.478 I-1.057 J1.361 E.04618 G1 X-81.089 Y40.602 E.01163 G2 X-82.072 Y41.553 I4.256 J5.381 E.04544 G3 X-83.382 Y41.897 I-1.057 J-1.361 E.04618 G1 X-83.71 Y41.772 E.01163 G3 X-84.693 Y40.821 I4.256 J-5.381 E.04544 G2 X-86.003 Y40.478 I-1.057 J1.361 E.04618 G1 X-86.331 Y40.602 E.01163 G2 X-87.313 Y41.553 I4.256 J5.381 E.04544 G3 X-88.624 Y41.897 I-1.057 J-1.361 E.04618 G1 X-88.951 Y41.772 E.01163 G3 X-89.934 Y40.821 I4.256 J-5.381 E.04544 G1 X-90.31 Y40.641 E.01383 G1 X-90.31 Y43.115 E.08207 G3 X-89.607 Y43.223 I.227 J.869 E.02427 G3 X-88.624 Y44.174 I-4.256 J5.381 E.04544 G2 X-87.313 Y44.518 I1.057 J-1.361 E.04618 G1 X-86.986 Y44.393 E.01163 G2 X-86.003 Y43.442 I-4.257 J-5.381 E.04544 G3 X-84.693 Y43.098 I1.057 J1.361 E.04618 G1 X-84.365 Y43.223 E.01163 G3 X-83.382 Y44.174 I-4.256 J5.381 E.04544 G2 X-82.072 Y44.518 I1.057 J-1.361 E.04618 G1 X-81.745 Y44.393 E.01163 G2 X-80.762 Y43.442 I-4.257 J-5.381 E.04544 G3 X-79.451 Y43.098 I1.057 J1.361 E.04618 G1 X-79.124 Y43.223 E.01163 G3 X-78.141 Y44.174 I-4.256 J5.381 E.04544 G2 X-76.831 Y44.518 I1.057 J-1.361 E.04618 G1 X-76.503 Y44.393 E.01163 G2 X-75.52 Y43.442 I-4.256 J-5.381 E.04544 G1 X-75.191 Y43.284 E.01211 G2 X-74.739 Y44.822 I3.257 J-.122 E.05373 G1 X-82.922 Y49.243 F30000 G1 F16200 G1 X-82.93 Y49.36 E.00389 G1 X-81.419 Y49.36 E.05013 G2 X-80.762 Y48.683 I-3.045 J-3.615 E.03133 G3 X-79.124 Y48.464 I1.024 J1.426 E.05707 G3 X-78.195 Y49.36 I-4.006 J5.084 E.04287 G1 X-76.177 Y49.36 E.06693 G2 X-75.52 Y48.683 I-3.045 J-3.615 E.03133 G3 X-73.883 Y48.464 I1.024 J1.426 E.05707 G3 X-72.954 Y49.36 I-4.006 J5.084 E.04287 G1 X-70.936 Y49.36 E.06693 G2 X-70.279 Y48.683 I-3.045 J-3.615 E.03133 G3 X-68.641 Y48.464 I1.024 J1.426 E.05707 G3 X-67.712 Y49.36 I-4.006 J5.084 E.04287 G1 X-65.695 Y49.36 E.06693 G2 X-65.038 Y48.683 I-3.045 J-3.615 E.03133 G3 X-63.4 Y48.464 I1.024 J1.426 E.05707 G3 X-62.471 Y49.36 I-4.006 J5.084 E.04287 G1 X-60.454 Y49.36 E.06693 G2 X-59.797 Y48.683 I-3.045 J-3.615 E.03133 G3 X-58.159 Y48.464 I1.024 J1.426 E.05707 G3 X-57.23 Y49.36 I-4.006 J5.084 E.04287 G1 X-55.212 Y49.36 E.06693 G2 X-54.555 Y48.683 I-3.045 J-3.615 E.03133 G3 X-52.917 Y48.464 I1.024 J1.426 E.05707 G3 X-51.989 Y49.36 I-4.006 J5.084 E.04287 G1 X-49.971 Y49.36 E.06693 G2 X-49.314 Y48.683 I-3.045 J-3.615 E.03133 G3 X-47.676 Y48.464 I1.024 J1.426 E.05707 G3 X-46.747 Y49.36 I-4.006 J5.084 E.04287 G1 X-44.73 Y49.36 E.06693 G2 X-44.073 Y48.683 I-3.045 J-3.615 E.03133 G3 X-42.435 Y48.464 I1.024 J1.426 E.05707 G3 X-41.506 Y49.36 I-4.006 J5.084 E.04287 G1 X-39.488 Y49.36 E.06693 G2 X-38.831 Y48.683 I-3.045 J-3.615 E.03133 G3 X-37.193 Y48.464 I1.024 J1.426 E.05707 G3 X-36.265 Y49.36 I-4.006 J5.084 E.04287 G1 X-34.247 Y49.36 E.06693 G2 X-33.59 Y48.683 I-3.045 J-3.615 E.03133 G3 X-31.952 Y48.464 I1.024 J1.426 E.05707 G3 X-31.023 Y49.36 I-4.006 J5.084 E.04287 G1 X-29.006 Y49.36 E.06693 G2 X-28.349 Y48.683 I-3.045 J-3.615 E.03133 G3 X-26.711 Y48.464 I1.024 J1.426 E.05707 G3 X-25.782 Y49.36 I-4.006 J5.084 E.04287 G1 X-23.764 Y49.36 E.06693 G2 X-23.107 Y48.683 I-3.045 J-3.615 E.03133 G1 X-22.452 Y48.369 E.02411 G1 X-21.934 Y48.346 E.01721 G3 X-21.23 Y46.647 I5.329 J1.211 E.0613 G2 X-22.452 Y45.748 I-1.833 J1.212 E.05137 G1 X-23.107 Y45.719 E.02175 G2 X-23.763 Y46.12 I.244 J1.136 E.02597 G1 X-24.418 Y46.795 E.0312 G3 X-26.056 Y47.014 I-1.024 J-1.426 E.05707 G3 X-27.038 Y46.063 I4.256 J-5.381 E.04544 G2 X-28.676 Y45.844 I-1.024 J1.426 E.05707 G2 X-29.659 Y46.795 I4.256 J5.381 E.04544 G3 X-31.297 Y47.014 I-1.024 J-1.426 E.05707 G3 X-32.298 Y46.054 I13.987 J-15.59 E.04602 G3 X-33.695 Y45.759 I-.151 J-2.739 E.0479 G2 X-34.245 Y46.12 I.24 J.966 E.02225 G1 X-34.9 Y46.795 E.0312 G3 X-36.538 Y47.014 I-1.024 J-1.426 E.05707 G3 X-37.521 Y46.063 I4.256 J-5.381 E.04544 G2 X-39.159 Y45.844 I-1.024 J1.426 E.05707 G2 X-40.142 Y46.795 I4.256 J5.381 E.04544 G3 X-41.78 Y47.014 I-1.024 J-1.426 E.05707 G3 X-42.762 Y46.063 I4.256 J-5.381 E.04544 G2 X-44.4 Y45.844 I-1.024 J1.426 E.05707 G2 X-45.383 Y46.795 I4.256 J5.381 E.04544 G3 X-47.021 Y47.014 I-1.024 J-1.426 E.05707 G3 X-48.004 Y46.063 I4.256 J-5.381 E.04544 G2 X-49.642 Y45.844 I-1.024 J1.426 E.05707 G2 X-50.624 Y46.795 I4.256 J5.381 E.04544 G3 X-52.262 Y47.014 I-1.024 J-1.426 E.05707 G3 X-53.245 Y46.063 I4.256 J-5.381 E.04544 G2 X-54.883 Y45.844 I-1.024 J1.426 E.05707 G2 X-55.866 Y46.795 I4.256 J5.381 E.04544 G3 X-57.504 Y47.014 I-1.024 J-1.426 E.05707 G3 X-58.486 Y46.063 I4.256 J-5.381 E.04544 G2 X-60.124 Y45.844 I-1.024 J1.426 E.05707 G2 X-61.107 Y46.795 I4.256 J5.381 E.04544 G3 X-62.745 Y47.014 I-1.024 J-1.426 E.05707 G3 X-63.728 Y46.063 I4.256 J-5.381 E.04544 G2 X-65.365 Y45.844 I-1.024 J1.426 E.05707 G2 X-66.348 Y46.795 I4.256 J5.381 E.04544 G3 X-67.986 Y47.014 I-1.024 J-1.426 E.05707 G3 X-68.969 Y46.063 I4.256 J-5.381 E.04544 G2 X-70.607 Y45.844 I-1.024 J1.426 E.05707 G2 X-71.59 Y46.795 I4.256 J5.381 E.04544 G3 X-73.227 Y47.014 I-1.024 J-1.426 E.05707 G3 X-74.21 Y46.063 I4.256 J-5.381 E.04544 G2 X-75.848 Y45.844 I-1.024 J1.426 E.05707 G2 X-76.831 Y46.795 I4.256 J5.381 E.04544 G3 X-78.469 Y47.014 I-1.024 J-1.426 E.05707 G3 X-79.451 Y46.063 I4.256 J-5.381 E.04544 G2 X-81.089 Y45.844 I-1.024 J1.426 E.05707 G2 X-82.072 Y46.795 I4.256 J5.381 E.04544 G3 X-83.369 Y47.138 I-1.05 J-1.346 E.04574 G2 X-89.833 Y46.167 I-3.595 J1.934 E.25138 G2 X-90.31 Y45.882 I-.626 J.506 E.01882 G1 X-90.31 Y44.254 E.05401 G1 X-90.447 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.435619 G1 F12000 G2 X-90.507 Y47.54 I4.016 J1.062 E.00865 ;WIDTH:0.397645 G1 X-90.527 Y47.659 E.00351 ;WIDTH:0.358142 G1 X-90.547 Y47.779 E.00311 ;WIDTH:0.318639 G1 X-90.566 Y47.899 E.00272 ;WIDTH:0.276878 G1 X-90.588 Y48.032 E.00258 ;WIDTH:0.232118 G1 X-90.612 Y48.272 E.00371 ;WIDTH:0.184233 G1 X-90.636 Y48.519 E.00286 ;WIDTH:0.14478 G1 X-90.651 Y49.003 E.00402 G2 X-90.635 Y49.489 I7.429 J-.004 E.00404 ;WIDTH:0.161417 G1 X-90.61 Y49.744 E.00248 G1 X-90.31 Y25.763 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X-90.31 Y27.391 E.05401 G3 X-89.607 Y27.499 I.226 J.869 E.02427 G3 X-88.624 Y28.45 I-4.256 J5.381 E.04544 G2 X-87.313 Y28.794 I1.057 J-1.361 E.04618 G1 X-86.986 Y28.669 E.01163 G2 X-86.003 Y27.718 I-4.256 J-5.381 E.04544 G3 X-84.693 Y27.374 I1.057 J1.361 E.04618 G1 X-84.365 Y27.499 E.01163 G3 X-83.382 Y28.45 I-4.256 J5.381 E.04544 G2 X-82.072 Y28.794 I1.057 J-1.361 E.04618 G1 X-81.745 Y28.669 E.01163 G2 X-80.762 Y27.718 I-4.256 J-5.381 E.04544 G3 X-79.451 Y27.374 I1.057 J1.361 E.04618 G1 X-79.124 Y27.499 E.01163 G3 X-78.141 Y28.45 I-4.256 J5.381 E.04544 G2 X-76.831 Y28.794 I1.057 J-1.361 E.04618 G1 X-76.503 Y28.669 E.01163 G2 X-75.52 Y27.718 I-4.256 J-5.381 E.04544 G3 X-74.21 Y27.374 I1.057 J1.361 E.04618 G1 X-74.09 Y27.42 E.00426 M73 P19 R87 G1 X-74.09 Y25.221 E.07295 G2 X-75.52 Y24.754 I-1.312 J1.592 E.05109 G1 X-75.848 Y24.878 E.01163 G2 X-76.831 Y25.829 I4.256 J5.381 E.04544 G3 X-78.141 Y26.173 I-1.057 J-1.361 E.04618 G1 X-78.469 Y26.049 E.01163 G3 X-79.451 Y25.097 I4.257 J-5.381 E.04544 G2 X-80.762 Y24.754 I-1.057 J1.361 E.04618 G1 X-81.089 Y24.878 E.01163 G2 X-82.072 Y25.829 I4.256 J5.381 E.04544 G3 X-83.382 Y26.173 I-1.057 J-1.361 E.04618 G3 X-84.31 Y25.492 I.748 J-1.99 E.03865 G1 X-84.31 Y26.64 E.03809 G1 X-90.09 Y26.64 E.19175 G1 X-90.09 Y24.486 E.07145 G1 X-89.713 Y24.411 E.01275 G1 X-89.713 Y22.217 E.07278 G2 X-90.314 Y22.15 I-.379 J.663 E.02063 G1 X-90.31 Y16.908 E.17387 G3 X-89.607 Y17.016 I.227 J.869 E.02427 G3 X-88.624 Y17.968 I-4.256 J5.381 E.04544 G2 X-87.313 Y18.311 I1.057 J-1.361 E.04618 G1 X-86.986 Y18.187 E.01163 G2 X-86.003 Y17.235 I-4.256 J-5.381 E.04544 G3 X-84.693 Y16.892 I1.057 J1.361 E.04618 G1 X-84.365 Y17.016 E.01163 G3 X-83.382 Y17.968 I-4.256 J5.381 E.04544 G2 X-82.072 Y18.311 I1.057 J-1.361 E.04618 G1 X-81.745 Y18.187 E.01163 G2 X-80.762 Y17.235 I-4.256 J-5.381 E.04544 G3 X-79.451 Y16.892 I1.057 J1.361 E.04618 G1 X-79.124 Y17.016 E.01163 G3 X-78.141 Y17.968 I-4.256 J5.381 E.04544 G2 X-76.831 Y18.311 I1.057 J-1.361 E.04618 G1 X-76.503 Y18.187 E.01163 G2 X-75.52 Y17.235 I-4.256 J-5.381 E.04544 G3 X-74.21 Y16.892 I1.057 J1.361 E.04618 G1 X-74.09 Y16.937 E.00426 G1 X-74.09 Y14.738 E.07295 G2 X-75.52 Y14.271 I-1.312 J1.592 E.05109 G1 X-75.848 Y14.396 E.01163 G2 X-76.831 Y15.347 I4.256 J5.381 E.04544 G3 X-78.141 Y15.691 I-1.057 J-1.361 E.04618 G1 X-78.469 Y15.566 E.01163 G3 X-79.451 Y14.615 I4.256 J-5.381 E.04544 G2 X-80.762 Y14.271 I-1.057 J1.361 E.04618 G1 X-81.089 Y14.396 E.01163 G2 X-82.072 Y15.347 I4.256 J5.381 E.04544 G3 X-83.382 Y15.691 I-1.057 J-1.361 E.04618 G1 X-83.71 Y15.566 E.01163 G3 X-84.693 Y14.615 I4.256 J-5.381 E.04544 G2 X-86.003 Y14.271 I-1.057 J1.361 E.04618 G1 X-86.331 Y14.396 E.01163 G2 X-87.313 Y15.347 I4.256 J5.381 E.04544 G3 X-88.624 Y15.691 I-1.057 J-1.361 E.04618 G1 X-88.951 Y15.566 E.01163 G3 X-89.934 Y14.615 I4.256 J-5.381 E.04544 G1 X-90.31 Y14.434 E.01383 G1 X-90.31 Y11.667 E.09179 G3 X-89.607 Y11.775 I.227 J.869 E.02427 G3 X-88.624 Y12.726 I-4.256 J5.381 E.04544 G2 X-87.313 Y13.07 I1.057 J-1.361 E.04618 G1 X-86.986 Y12.945 E.01163 G2 X-86.003 Y11.994 I-4.257 J-5.381 E.04544 G3 X-84.693 Y11.651 I1.057 J1.361 E.04618 G1 X-84.365 Y11.775 E.01163 G3 X-83.382 Y12.726 I-4.256 J5.381 E.04544 G2 X-82.072 Y13.07 I1.057 J-1.361 E.04618 G1 X-81.745 Y12.945 E.01163 G2 X-80.762 Y11.994 I-4.257 J-5.381 E.04544 G3 X-79.451 Y11.651 I1.057 J1.361 E.04618 G1 X-79.124 Y11.775 E.01163 G3 X-78.141 Y12.726 I-4.256 J5.381 E.04544 G2 X-76.831 Y13.07 I1.057 J-1.361 E.04618 G1 X-76.503 Y12.945 E.01163 G2 X-75.52 Y11.994 I-4.256 J-5.381 E.04544 G3 X-74.21 Y11.651 I1.057 J1.361 E.04618 G1 X-74.09 Y11.696 E.00426 G1 X-74.09 Y9.497 E.07295 G2 X-75.52 Y9.03 I-1.312 J1.592 E.05109 G1 X-75.848 Y9.154 E.01163 G2 X-76.831 Y10.106 I4.256 J5.381 E.04544 G3 X-78.141 Y10.449 I-1.057 J-1.361 E.04618 G1 X-78.469 Y10.325 E.01163 G3 X-79.451 Y9.374 I4.256 J-5.381 E.04544 G2 X-80.762 Y9.03 I-1.057 J1.361 E.04618 G1 X-81.089 Y9.154 E.01163 G2 X-82.072 Y10.106 I4.256 J5.381 E.04544 G3 X-83.382 Y10.449 I-1.057 J-1.361 E.04618 G1 X-83.71 Y10.325 E.01163 G3 X-84.693 Y9.374 I4.256 J-5.381 E.04544 G2 X-86.003 Y9.03 I-1.057 J1.361 E.04618 G1 X-86.331 Y9.154 E.01163 G2 X-87.313 Y10.106 I4.256 J5.381 E.04544 G3 X-88.624 Y10.449 I-1.057 J-1.361 E.04618 G1 X-88.951 Y10.325 E.01163 G3 X-89.934 Y9.374 I4.256 J-5.381 E.04544 G1 X-90.31 Y9.193 E.01383 G1 X-90.31 Y7.565 E.05401 G1 X-89.796 Y21.385 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-89.796 Y19.744 E.04544 G1 X-89.777 Y19.654 E.00256 G1 X-84.694 Y19.654 E.14083 G1 X-84.619 Y19.669 E.00212 G1 X-84.605 Y20.292 E.01726 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.604 Y22.628 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-84.604 Y21.011 E.04481 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.604 Y22.628 ;WIPE_END G1 X-90.604 Y22.002 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.604 Y-3.204 E.69836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.796 Y24.728 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-89.796 Y26.256 E.04233 G1 X-89.777 Y26.346 E.00256 G1 X-84.694 Y26.346 E.14083 G1 X-84.604 Y26.327 E.00256 G1 X-84.604 Y23.303 E.08379 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.604 Y25.303 ;WIPE_END G1 X-90.604 Y24.938 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.593 Y46.929 E.60928 G1 X-90.147 Y47.035 E.0127 G1 X-89.605 Y46.353 E.02413 G3 X-83.253 Y49.544 I2.648 J2.646 E.25954 G1 X-83.247 Y49.654 E.00305 G1 X-21.745 Y49.654 E1.70396 G1 X-21.654 Y49.621 E.00267 G3 X-21.569 Y48.024 I4.303 J-.574 E.04457 G3 X-14.753 Y47.035 I3.623 J.987 E.24153 G1 X-14.296 Y46.926 E.01301 G1 X-14.296 Y24.089 E.63274 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.296 Y26.089 ;WIPE_END G1 X-12.094 Y18.781 Z2 F30000 G1 X6.16 Y-41.79 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z2 F30000 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z2 F30000 G1 Z1.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z2 F30000 G1 X74.198 Y15.448 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z2 F30000 G1 X90.96 Y7.29 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z2 F30000 G1 X75.04 Y16.29 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X75.418 Y15.237 Z2 F30000 G1 Z1.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.03215 G1 X76.387 Y14.578 E.02186 G2 X75.153 Y14.271 I-.976 J1.29 E.04333 G2 X74.313 Y14.863 I.671 J1.845 E.03449 G1 X74.313 Y12.825 E.06759 G2 X75.153 Y11.994 I-3.728 J-4.61 E.03927 G1 X75.809 Y11.679 E.02411 G1 X76.387 Y11.654 E.0192 G1 X76.387 Y9.337 E.07687 G2 X75.153 Y9.03 I-.976 J1.29 E.04333 G2 X74.313 Y9.621 I.671 J1.845 E.03449 G1 X74.313 Y7.993 E.05401 G1 X77.223 Y7 F30000 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X91.178 Y7 E.1651 G1 X91.226 Y7.024 E.00064 ;WIDTH:0.260421 G1 X91.274 Y7.048 E.00096 ;WIDTH:0.308755 G1 X91.323 Y7.073 E.00117 ;WIDTH:0.346671 G1 X91.336 Y7.086 E.00048 ;WIDTH:0.374169 G1 X91.35 Y7.1 E.00052 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.24737 G1 X91.336 Y15.914 E.00055 ;WIDTH:0.346671 G1 X91.323 Y15.928 E.00048 ;WIDTH:0.308756 G1 X91.274 Y15.952 E.00117 ;WIDTH:0.260422 G1 X91.226 Y15.976 E.00096 ;WIDTH:0.212089 G1 X91.178 Y16 E.00074 ;WIDTH:0.187921 G1 X77.223 Y16 E.16489 G1 X74.15 Y15.651 F30000 ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X69.268 Y21.519 Z2 F30000 G1 X55.548 Y38.01 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z2 F30000 G1 Z1.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X49.645 Y-5.756 Z2 F30000 G1 X3.102 Y40.648 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X35.998 Y-10.448 E1.09122 G1 X35.998 Y40.648 E1.69494 G1 X3.142 Y40.648 E1.08989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 M73 P20 R87 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.93 Y39.348 Z2 F30000 G1 X35.67 Y38.868 Z2 G1 Z1.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.420932 G1 F12000 G1 X35.318 Y39.22 E.01531 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.784 Y39.22 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y38.334 E.0386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y37.799 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X34.249 Y39.22 E.06189 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.67 Y39.799 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X32.848 Y40.622 E.03582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.313 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y37.265 E.14623 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y36.73 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.778 Y40.622 E.16952 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.244 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y36.196 E.19281 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y35.661 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X30.709 Y40.622 E.2161 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.175 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y35.126 E.23938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y34.592 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X29.64 Y40.622 E.26267 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.106 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y34.057 E.28596 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y33.523 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.571 Y40.622 E.30925 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.036 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y32.988 E.33254 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y32.453 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.502 Y40.622 E.35582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.967 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y31.919 E.37911 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y31.384 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.433 Y40.622 E.4024 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.898 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y30.85 E.42569 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y30.315 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.363 Y40.622 E.44898 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.829 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y29.78 E.47226 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y29.246 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.294 Y40.622 E.49555 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.76 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y28.711 E.51884 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y28.177 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.225 Y40.622 E.54213 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.69 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y27.642 E.56542 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y27.108 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.156 Y40.622 E.5887 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.621 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y26.573 E.61199 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y26.038 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.087 Y40.622 E.63528 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.552 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y25.504 E.65857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y24.969 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.017 Y40.622 E.68186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.483 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y24.435 E.70514 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y23.9 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.948 Y40.622 E.72843 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.414 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y23.365 E.75172 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y22.831 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.879 Y40.622 E.77501 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.345 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y22.296 E.7983 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y21.762 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X16.81 Y40.622 E.82158 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.275 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y21.227 E.84487 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y20.692 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.741 Y40.622 E.86816 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.206 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y20.158 E.89145 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y19.623 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.672 Y40.622 E.91474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.137 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y19.089 E.93802 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y18.554 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X13.602 Y40.622 E.96131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.068 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y18.019 E.9846 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y17.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X12.533 Y40.622 E1.00789 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.999 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y16.95 E1.03117 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y16.416 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X11.464 Y40.622 E1.05446 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.929 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y15.881 E1.07775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y15.347 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X10.395 Y40.622 E1.10104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.86 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y14.812 E1.12433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y14.277 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X9.326 Y40.622 E1.14761 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.791 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y13.743 E1.1709 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y13.208 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.257 Y40.622 E1.19419 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.722 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y12.674 E1.21748 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y12.139 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.187 Y40.622 E1.24077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.653 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y11.604 E1.26405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y11.07 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.118 Y40.622 E1.28734 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.584 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y10.535 E1.31063 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y10.001 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.049 Y40.622 E1.33392 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.514 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y9.466 E1.35721 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y8.931 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.98 Y40.622 E1.38049 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.453 Y40.613 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y8.397 E1.40342 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y7.862 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y40.102 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y39.568 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y7.328 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y6.793 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y39.033 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y38.498 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y6.259 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y5.724 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y37.964 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y37.429 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y5.189 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y4.655 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y36.895 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y36.36 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y4.12 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y3.586 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y35.825 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y35.291 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y3.051 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y2.516 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y34.756 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y34.222 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y1.982 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y1.447 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y33.687 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y33.152 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y.913 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y.378 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y32.618 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y32.083 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-.157 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-.691 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y31.549 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y31.014 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-1.226 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-1.76 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y30.48 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y29.945 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-2.295 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-2.83 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y29.41 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y28.876 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-3.364 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-3.899 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y28.341 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y27.807 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-4.433 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-4.968 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y27.272 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y26.737 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-5.502 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-6.037 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y26.203 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y25.668 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-6.572 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-7.106 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y25.134 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y24.599 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-7.641 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-8.175 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y24.064 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y23.53 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-8.71 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-9.245 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y22.995 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y22.461 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.67 Y-9.779 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.67 Y-10.314 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y21.926 E1.40444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y21.391 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.243 Y-10.422 E1.38585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.709 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y20.857 E1.36256 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y20.322 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X34.174 Y-10.422 E1.33927 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.639 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y19.788 E1.31599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y19.253 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X33.105 Y-10.422 E1.2927 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.57 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y18.719 E1.26941 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y18.184 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X32.036 Y-10.422 E1.24612 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.501 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y17.649 E1.22283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y17.115 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X30.966 Y-10.422 E1.19955 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.432 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y16.58 E1.17626 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y16.046 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X29.897 Y-10.422 E1.15297 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.363 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y15.511 E1.12968 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y14.976 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.828 Y-10.422 E1.1064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.293 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y14.442 E1.08311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y13.907 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.759 Y-10.422 E1.05982 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.224 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y13.373 E1.03653 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y12.838 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.69 Y-10.422 E1.01324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.155 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y12.303 E.98996 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y11.769 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.621 Y-10.422 E.96667 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.086 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y11.234 E.94338 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y10.7 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.551 Y-10.422 E.92009 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.017 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y10.165 E.8968 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y9.631 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.482 Y-10.422 E.87352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.948 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y9.096 E.85023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y8.561 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.413 Y-10.422 E.82694 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.878 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y8.027 E.80365 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y7.492 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.344 Y-10.422 E.78036 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.809 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y6.958 E.75708 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y6.423 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.275 Y-10.422 E.73379 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.74 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y5.888 E.7105 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y5.354 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.205 Y-10.422 E.68721 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.671 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y4.819 E.66392 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y4.285 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.136 Y-10.422 E.64064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.602 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y3.75 E.61735 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y3.215 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.067 Y-10.422 E.59406 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.533 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y2.681 E.57077 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y2.146 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X15.998 Y-10.422 E.54748 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.463 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y1.612 E.5242 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y1.077 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X14.929 Y-10.422 E.50091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.394 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y.542 E.47762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y.008 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X13.86 Y-10.422 E.45433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.325 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-.527 E.43104 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-1.061 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X12.79 Y-10.422 E.40776 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.256 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-1.596 E.38447 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-2.13 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X11.721 Y-10.422 E.36118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.187 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-2.665 E.33789 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-3.2 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X10.652 Y-10.422 E.3146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.117 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-3.734 E.29132 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-4.269 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X9.583 Y-10.422 E.26803 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.048 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-4.803 E.24474 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-5.338 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X8.514 Y-10.422 E.22145 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.979 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-5.873 E.19816 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-6.407 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X7.444 Y-10.422 E.17488 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.91 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-6.942 E.15159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-7.476 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X6.375 Y-10.422 E.1283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.841 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-8.011 E.10501 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-8.546 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X5.306 Y-10.422 E.08173 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.772 Y-10.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.43 Y-9.08 E.05844 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.43 Y-9.615 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.237 Y-10.422 E.03515 ;LAYER_CHANGE ;Z:1.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;1.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.43 Y-9.615 ;WIPE_END ;AFTER_LAYER_CHANGE ;1.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.2 I-.196 J-1.201 P1 F30000 G1 X-16.24 Y-6.41 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-19.244 Y2.614 Z2.2 F30000 G1 X-31.398 Y31.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.032 Y25.231 Z2.2 F30000 G1 X-64.59 Y-6.459 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.609 Y-6.68 E.00737 G3 X-63.761 Y-8.389 I2.152 J.002 E.06556 G3 X-62.636 Y-8.822 I1.326 J1.766 E.04053 G3 X-64.591 Y-6.398 I.179 J2.145 E.33304 G1 X-64.59 Y-6.419 E.00068 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y-6.485 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.193 Y-6.68 E.00647 G3 X-62.609 Y-8.416 I1.743 J0 E.08553 G3 X-61.847 Y-5.044 I.159 J1.736 E.16653 G3 X-64.177 Y-6.446 I-.602 J-1.636 E.10344 G1 X-63.75 Y-6.514 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.766 Y-6.68 E.00514 G3 X-62.951 Y-7.891 I1.309 J.001 E.04755 G3 X-62.581 Y-7.982 I.536 J1.38 E.01177 G3 X-63.75 Y-6.476 I.124 J1.303 E.18707 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.766 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.707 Y-7.96 ;WIPE_END G1 X-55.107 Y-7.261 Z2.2 F30000 G1 X-40.448 Y-5.913 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.505 Y-5.771 E.00507 G3 X-43.761 Y-8.389 I-1.952 J-.906 E.25887 G3 X-42.636 Y-8.822 I1.326 J1.766 E.04053 G3 X-40.377 Y-6.125 I.179 J2.145 E.13662 G1 X-40.435 Y-5.951 E.00608 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.817 Y-6.069 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.839 Y-6.013 E.002 G3 X-41.847 Y-5.044 I-1.611 J-.667 E.0477 G3 X-42.609 Y-8.416 I-.602 J-1.636 E.19676 G3 X-40.766 Y-6.229 I.159 J1.736 E.11125 G1 X-40.805 Y-6.107 E.00424 G1 X-41.233 Y-6.209 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.262 Y-6.144 E.00218 G3 X-42.951 Y-7.891 I-1.195 J-.535 E.15702 G3 X-42.581 Y-7.982 I.536 J1.38 E.01177 G3 X-41.192 Y-6.343 I.124 J1.303 E.07742 G1 X-41.221 Y-6.247 E.00307 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.262 Y-6.144 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.833 Y-5.437 ;WIPE_END G1 X-38.273 Y.683 Z2.2 F30000 G1 X-20.002 Y25.21 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.229 Y29.653 Z2.2 F30000 G1 X-33.19 Y45.339 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.273 Y45.306 E.00296 G3 X-32.636 Y41.178 I.823 J-1.986 E.18987 G3 X-31.716 Y45.341 I.19 J2.141 E.20566 G3 X-33.006 Y45.397 I-.733 J-2.021 E.04351 G1 X-33.152 Y45.351 E.00505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.059 Y44.954 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.117 Y44.93 E.00208 G3 X-32.609 Y41.584 I.667 J-1.61 E.15364 G3 X-31.847 Y44.956 I.159 J1.736 E.16653 G3 X-32.901 Y45.004 I-.602 J-1.636 E.03556 G1 X-33.021 Y44.966 E.00416 G1 X-32.916 Y44.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.533 E.00113 G3 X-32.951 Y42.109 I.495 J-1.211 E.09515 G3 X-32.581 Y42.018 I.536 J1.38 E.01177 G3 X-32.621 Y44.62 I.124 J1.303 E.13521 G1 X-32.878 Y44.551 E.00816 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.661 Y43.821 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.716 Y42.981 G1 X-33.703 Y42.942 ;WIPE_END G1 X-41.321 Y43.406 Z2.2 F30000 G1 X-73.18 Y45.342 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.274 Y45.309 E.00329 G3 X-72.636 Y41.178 I.82 J-1.988 E.19017 G3 X-71.716 Y45.341 I.185 J2.142 E.20537 G3 X-73.007 Y45.399 I-.737 J-2.02 E.04353 M73 P20 R86 G1 X-73.142 Y45.355 E.00472 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.049 Y44.957 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.118 Y44.932 E.00241 G3 X-72.609 Y41.584 I.665 J-1.612 E.15388 G3 X-71.847 Y44.956 I.159 J1.736 E.16651 G3 X-72.902 Y45.005 I-.606 J-1.635 E.03558 G1 X-73.011 Y44.969 E.00384 G1 X-72.907 Y44.543 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.952 Y44.533 E.00143 G3 X-72.951 Y42.109 I.495 J-1.211 E.09515 G3 X-72.581 Y42.018 I.536 J1.38 E.01177 G3 X-72.621 Y44.62 I.124 J1.303 E.13521 G1 X-72.868 Y44.553 E.00786 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.952 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.704 Y42.953 ;WIPE_END G1 X-77.864 Y36.554 Z2.2 F30000 G1 X-88.66 Y19.948 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-79.786 Y17.485 Z2.2 F30000 G1 X-18.794 Y-11.948 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-18.044 Y-7.252 I2.847 J1.953 E.174 G1 X-20.002 Y-7.252 E.06494 G1 X-20.002 Y-1.748 E.18258 G1 X-15.398 Y-1.748 E.15273 G1 X-15.398 Y-6.595 E.1608 G2 X-14.002 Y-7.156 I-.443 J-3.121 E.05038 G1 X-14.002 Y49.948 E1.89424 G1 X-14.624 Y49.948 E.02063 G2 X-21.276 Y49.948 I-3.326 J-.939 E.42323 G1 X-83.624 Y49.948 E2.0682 G2 X-90.276 Y49.948 I-3.326 J-.939 E.42323 G1 X-90.898 Y49.948 E.02063 G1 X-90.898 Y-7.156 E1.89424 G2 X-89.502 Y-6.595 I1.839 J-2.561 E.05038 G1 X-89.502 Y-1.748 E.1608 G1 X-84.898 Y-1.748 E.15273 G1 X-84.898 Y-7.252 E.18258 G1 X-86.856 Y-7.252 E.06494 G2 X-86.106 Y-11.948 I-2.097 J-2.743 E.174 G1 X-84.398 Y-11.948 E.05666 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-18.834 Y-11.948 E.05533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.928 Y-12.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-18.367 Y-11.855 E.02208 G2 X-16.715 Y-7.049 I2.433 J1.85 E.19898 G1 X-16.749 Y-6.845 E.00687 G1 X-19.595 Y-6.845 E.09441 G1 X-19.595 Y-2.155 E.15558 G1 X-15.805 Y-2.155 E.12572 G1 X-15.805 Y-6.963 E.15949 G2 X-14.095 Y-7.583 I-.161 J-3.109 E.06121 G1 X-13.595 Y-8.022 E.02208 G1 X-13.595 Y50.355 E1.93647 G1 X-15.229 Y50.355 E.0542 G2 X-20.671 Y50.355 I-2.721 J-1.355 E.40997 G1 X-84.229 Y50.355 E2.10832 G2 X-89.671 Y50.355 I-2.721 J-1.355 E.40997 G1 X-91.305 Y50.355 E.0542 G1 X-91.305 Y-8.022 E1.93647 G1 X-90.805 Y-7.583 E.02208 G2 X-89.095 Y-6.963 I1.87 J-2.489 E.06121 G1 X-89.095 Y-2.155 E.15949 G1 X-85.305 Y-2.155 E.12572 G1 X-85.305 Y-6.845 E.15558 G1 X-88.151 Y-6.845 E.09442 G1 X-88.185 Y-7.049 E.00687 G2 X-86.533 Y-11.855 I-.779 J-2.954 E.19901 G1 X-86.972 Y-12.355 E.02208 G1 X-84.805 Y-12.355 E.07189 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-17.968 Y-12.355 E.07056 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-18.367 Y-11.855 G1 X-18.588 Y-11.523 G1 X-18.764 Y-11.166 G1 X-18.893 Y-10.788 G1 X-18.925 Y-10.627 ;WIPE_END G1 X-15.257 Y-12.516 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-14.953 Y-12.408 E.00993 G3 X-17.354 Y-12.195 I-.996 J2.41 E.4265 G3 X-16.068 Y-12.603 I1.408 J2.21 E.04191 G3 X-15.296 Y-12.522 I.119 J2.605 E.02393 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.953 Y-12.408 G1 X-14.645 Y-12.261 G1 X-14.361 Y-12.071 G1 X-14.104 Y-11.846 G1 X-13.879 Y-11.589 G1 X-13.728 Y-11.363 ;WIPE_END G1 X-21.344 Y-10.859 Z2.2 F30000 G1 X-88.66 Y-6.41 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-90.271 Y-7.749 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-90.538 Y-7.93 E.00993 G3 X-90.354 Y-12.195 I1.589 J-2.068 E.15366 G3 X-89.068 Y-12.603 I1.408 J2.21 E.04191 G3 X-90.236 Y-7.729 I.119 J2.605 E.29675 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.538 Y-7.93 G1 X-90.796 Y-8.154 G1 X-91.021 Y-8.411 G1 X-91.211 Y-8.695 G1 X-91.362 Y-9.001 G1 X-91.449 Y-9.258 ;WIPE_END G1 X-83.826 Y-9.633 Z2.2 F30000 G1 X-19.66 Y-12.79 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-16.055 Y50.79 E.08896 G2 X-19.845 Y50.79 I-1.895 J-1.789 E.37273 G1 X-85.055 Y50.79 E2.00373 G2 X-88.845 Y50.79 I-1.895 J-1.789 E.37273 G1 X-91.74 Y50.79 E.08896 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-17.692 Y-12.259 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.14134 G1 F12000 G1 X-17.554 Y-12.38 E.00147 ;WIDTH:0.163551 G1 X-17.416 Y-12.501 E.00181 ;WIDTH:0.17539 G1 X-17.206 Y-12.558 E.00235 G1 X-14.656 Y-12.572 F30000 ;WIDTH:0.418032 G1 F12000 G1 X-13.377 Y-12.138 E.04129 G1 X-13.812 Y-12.572 F30000 ;WIDTH:0.401732 G1 F12000 G1 X-13.377 Y-11.294 E.03949 G1 X-13.392 Y-8.744 F30000 ;WIDTH:0.175391 G1 F12000 G1 X-13.449 Y-8.534 E.00235 ;WIDTH:0.163551 G1 X-13.57 Y-8.396 E.00181 ;WIDTH:0.141341 G1 X-13.691 Y-8.258 E.00147 G1 X-14.947 Y-3.824 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537303 G1 F15000 G1 X-14.758 Y-3.892 E.0081 G1 X-14.453 Y-3.728 E.01395 G1 X-14.453 Y-6.394 E.1074 G1 X-14.947 Y-6.244 E.02081 G1 X-14.947 Y-3.864 E.09587 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-14.947 Y-5.864 ;WIPE_END G1 X-19.524 Y-9.218 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G2 X-18.849 Y-7.751 I5.86 J-1.808 E.05373 G3 X-19.421 Y-7.772 I-.258 J-.764 E.01941 G1 X-19.285 Y-8.362 E.02006 G3 X-20.202 Y-8.809 I.933 J-3.074 E.03399 G1 X-14.947 Y21.526 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537302 G1 F15000 G1 X-14.947 Y24.125 E.10469 G1 X-14.453 Y23.743 E.02517 G1 X-14.453 Y21.451 E.09232 G1 X-14.818 Y21.478 E.01475 G1 X-14.91 Y21.512 E.00395 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.032 Y46.347 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X-14.583 Y47.068 E.04645 G1 X-14.784 Y47.115 E.01061 G1 X-14.971 Y46.835 E.01721 G1 X-14.235 Y45.87 E.06215 G1 X-14.235 Y45.129 E.03797 G1 X-15.266 Y46.48 E.08704 G2 X-15.596 Y46.17 I-1.34 J1.098 E.02323 G1 X-14.235 Y44.387 E.11487 G1 X-14.235 Y43.646 E.03797 G1 X-15.959 Y45.905 E.14553 G2 X-16.356 Y45.683 I-1.04 J1.397 E.02334 G1 X-14.235 Y42.904 E.17903 G1 X-14.235 Y42.163 E.03797 G1 X-16.789 Y45.508 E.21553 G2 X-17.261 Y45.385 I-.703 J1.732 E.02506 G1 X-14.235 Y41.421 E.25538 G1 X-14.235 Y40.679 E.03797 G1 X-17.78 Y45.324 E.29917 G2 X-18.358 Y45.339 I-.23 J2.204 E.02969 G1 X-14.235 Y39.938 E.34795 G1 X-14.235 Y39.196 E.03797 G1 X-19.254 Y45.771 E.42351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.408 Y48.592 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-22.266 Y49.715 E.07239 G1 X-22.832 Y49.715 E.02899 G1 X-21.475 Y47.939 E.11443 G3 X-19.904 Y45.88 I3.444 J1 E.13569 G1 X-14.235 Y38.455 E.47831 G1 X-14.235 Y37.713 E.03797 G1 X-23.398 Y49.715 E.77314 G1 X-23.964 Y49.715 E.02899 G1 X-14.235 Y36.972 E.82091 G1 X-14.235 Y36.23 E.03797 G1 X-24.53 Y49.715 E.86867 G1 X-25.096 Y49.715 E.02899 G1 X-14.235 Y35.489 E.91644 G1 X-14.235 Y34.747 E.03797 G1 X-25.663 Y49.715 E.96421 G1 X-26.229 Y49.715 E.02899 G1 X-14.235 Y34.005 E1.01198 G1 X-14.235 Y33.264 E.03797 G1 X-26.795 Y49.715 E1.05975 G1 X-27.361 Y49.715 E.02899 G1 X-14.235 Y32.522 E1.10752 G1 X-14.235 Y31.781 E.03797 G1 X-27.927 Y49.715 E1.15528 G1 X-28.493 Y49.715 E.02899 G1 X-14.235 Y31.039 E1.20305 G1 X-14.235 Y30.298 E.03797 G1 X-29.059 Y49.715 E1.25082 G1 X-29.626 Y49.715 E.02899 G1 X-14.235 Y29.556 E1.29859 G1 X-14.235 Y28.814 E.03797 G1 X-30.192 Y49.715 E1.34636 M73 P21 R86 G1 X-30.758 Y49.715 E.02899 G1 X-14.235 Y28.073 E1.39413 G1 X-14.235 Y27.331 E.03797 G1 X-31.324 Y49.715 E1.44189 G1 X-31.89 Y49.715 E.02899 G1 X-14.235 Y26.59 E1.48966 G1 X-14.235 Y25.848 E.03797 G1 X-32.456 Y49.715 E1.53743 G1 X-33.023 Y49.715 E.02899 G1 X-14.235 Y25.107 E1.5852 G1 X-14.235 Y24.365 E.03797 G1 X-15.165 Y25.584 E.07854 G1 X-15.165 Y26.285 E.03585 G1 X-15.7 Y26.285 E.02737 G1 X-33.589 Y49.715 E1.50932 G1 X-34.155 Y49.715 E.02899 G1 X-16.266 Y26.285 E1.50932 G1 X-16.832 Y26.285 E.02899 G1 X-30.086 Y43.644 E1.11821 G3 X-31.514 Y45.514 I-2.39 J-.344 E.12586 G1 X-34.721 Y49.715 E.27061 G1 X-35.287 Y49.715 E.02899 G1 X-32.215 Y45.692 E.25918 G3 X-32.776 Y45.684 I-.237 J-3.123 E.02872 G1 X-35.853 Y49.715 E.25968 G1 X-36.419 Y49.715 E.02899 G1 X-33.25 Y45.564 E.26741 G3 X-33.669 Y45.371 I1.029 J-2.777 E.02363 G1 X-36.986 Y49.715 E.27986 G1 X-37.552 Y49.715 E.02899 G1 X-34.03 Y45.103 E.29713 G3 X-34.344 Y44.773 I2.446 J-2.644 E.02335 G1 X-38.118 Y49.715 E.31839 G1 X-38.684 Y49.715 E.02899 G1 X-34.594 Y44.358 E.34509 G3 X-34.773 Y43.851 I2.229 J-1.072 E.02758 G1 X-39.405 Y49.918 E.39079 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.28 Y43.157 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-17.399 Y26.285 E1.08687 G1 X-17.965 Y26.285 E.02899 G1 X-30.262 Y42.392 E1.03755 G2 X-30.496 Y41.957 I-1.431 J.49 E.0254 G1 X-18.531 Y26.285 E1.00953 G1 X-19.097 Y26.285 E.02899 G1 X-30.793 Y41.604 E.98685 G2 X-31.147 Y41.326 I-1.235 J1.203 E.02311 G1 X-19.663 Y26.285 E.9689 G1 X-20.229 Y26.285 E.02899 G1 X-31.548 Y41.11 E.95502 G2 X-32.013 Y40.978 I-.736 J1.701 E.02483 G1 X-20.572 Y25.992 E.96535 G1 X-20.977 Y26.143 E.02216 G1 X-20.595 Y25.28 E.04833 G1 X-32.719 Y41.161 E1.023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.971 Y49.918 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-34.828 Y43.182 E.43391 G3 X-33.21 Y41.062 I2.354 J.12 E.14513 G1 X-20.235 Y24.067 E1.09478 G1 X-20.235 Y23.325 E.03797 G1 X-40.383 Y49.715 E1.69995 G1 X-40.949 Y49.715 E.02899 G1 X-20.472 Y22.894 E1.72772 G1 X-20.85 Y22.989 E.01997 G1 X-20.528 Y22.226 E.0424 G1 X-41.515 Y49.715 E1.77075 G1 X-42.081 Y49.715 E.02899 G1 X-20.032 Y20.835 E1.86034 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-21.246 Y22.425 ;WIPE_END G1 X-14.641 Y21.19 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-14.235 Y20.657 E.0343 G1 X-14.235 Y19.916 E.03797 G1 X-15.132 Y21.091 E.07572 G1 X-15.165 Y21.104 E.00183 G1 X-15.165 Y20.393 E.03637 G1 X-14.235 Y19.174 E.07854 G1 X-14.235 Y18.433 E.03797 G1 X-15.214 Y19.715 E.08263 G1 X-15.78 Y19.715 E.02899 G1 X-14.235 Y17.691 E.1304 G1 X-14.235 Y16.949 E.03797 G1 X-16.346 Y19.715 E.17817 G1 X-16.912 Y19.715 E.02899 G1 X-14.235 Y16.208 E.22594 G1 X-14.235 Y15.466 E.03797 G1 X-17.479 Y19.715 E.27371 G1 X-18.045 Y19.715 E.02899 G1 X-14.235 Y14.725 E.32148 G1 X-14.235 Y13.983 E.03797 G1 X-18.611 Y19.715 E.36924 G1 X-19.177 Y19.715 E.02899 G1 X-14.235 Y13.242 E.41701 G1 X-14.235 Y12.5 E.03797 G1 X-19.743 Y19.715 E.46478 G1 X-20.235 Y19.715 E.02516 G1 X-20.235 Y20.359 E.03295 G1 X-42.647 Y49.715 E1.89102 G1 X-43.213 Y49.715 E.02899 G1 X-14.235 Y11.759 E2.44503 G1 X-14.235 Y11.017 E.03797 G1 X-43.78 Y49.715 E2.4928 G1 X-44.346 Y49.715 E.02899 G1 X-14.235 Y10.275 E2.54057 G1 X-14.235 Y9.534 E.03797 G1 X-31.165 Y31.71 E1.42851 G1 X-31.165 Y32.285 E.02941 G1 X-31.604 Y32.285 E.02245 G1 X-44.912 Y49.715 E1.12283 G1 X-45.478 Y49.715 E.02899 G1 X-32.17 Y32.285 E1.12283 G1 X-32.736 Y32.285 E.02899 G1 X-46.044 Y49.715 E1.12283 G1 X-46.61 Y49.715 E.02899 G1 X-33.302 Y32.285 E1.12283 G1 X-33.869 Y32.285 E.02899 G1 X-47.176 Y49.715 E1.12283 G1 X-47.743 Y49.715 E.02899 G1 X-34.435 Y32.285 E1.12283 G1 X-35.001 Y32.285 E.02899 G1 X-48.309 Y49.715 E1.12283 G1 X-48.875 Y49.715 E.02899 G1 X-35.567 Y32.285 E1.12283 G1 X-36.133 Y32.285 E.02899 G1 X-49.441 Y49.715 E1.12283 G1 X-50.007 Y49.715 E.02899 G1 X-36.699 Y32.285 E1.12283 G1 X-37.266 Y32.285 E.02899 G1 X-50.573 Y49.715 E1.12283 G1 X-51.14 Y49.715 E.02899 G1 X-37.832 Y32.285 E1.12283 G1 X-38.398 Y32.285 E.02899 G1 X-51.706 Y49.715 E1.12283 G1 X-52.272 Y49.715 E.02899 G1 X-38.964 Y32.285 E1.12283 G1 X-39.53 Y32.285 E.02899 G1 X-52.838 Y49.715 E1.12283 G1 X-53.404 Y49.715 E.02899 G1 X-40.096 Y32.285 E1.12283 G1 X-40.662 Y32.285 E.02899 G1 X-53.97 Y49.715 E1.12283 G1 X-54.537 Y49.715 E.02899 G1 X-41.229 Y32.285 E1.12283 G1 X-41.795 Y32.285 E.02899 G1 X-55.103 Y49.715 E1.12283 G1 X-55.669 Y49.715 E.02899 G1 X-42.361 Y32.285 E1.12283 G1 X-42.927 Y32.285 E.02899 G1 X-56.235 Y49.715 E1.12283 G1 X-56.801 Y49.715 E.02899 G1 X-43.493 Y32.285 E1.12283 G1 X-44.059 Y32.285 E.02899 G1 X-57.367 Y49.715 E1.12283 G1 X-57.933 Y49.715 E.02899 G1 X-44.626 Y32.285 E1.12283 G1 X-45.192 Y32.285 E.02899 G1 X-58.5 Y49.715 E1.12283 G1 X-59.066 Y49.715 E.02899 G1 X-45.758 Y32.285 E1.12283 G1 X-46.324 Y32.285 E.02899 G1 X-59.632 Y49.715 E1.12283 G1 X-60.198 Y49.715 E.02899 G1 X-46.89 Y32.285 E1.12283 G1 X-47.456 Y32.285 E.02899 G1 X-60.764 Y49.715 E1.12283 G1 X-61.33 Y49.715 E.02899 G1 X-48.023 Y32.285 E1.12283 G1 X-48.589 Y32.285 E.02899 G1 X-61.897 Y49.715 E1.12283 G1 X-62.463 Y49.715 E.02899 G1 X-49.155 Y32.285 E1.12283 G1 X-49.721 Y32.285 E.02899 G1 X-63.029 Y49.715 E1.12283 G1 X-63.595 Y49.715 E.02899 G1 X-50.287 Y32.285 E1.12283 G1 X-50.853 Y32.285 E.02899 G1 X-64.161 Y49.715 E1.12283 G1 X-64.727 Y49.715 E.02899 G1 X-51.419 Y32.285 E1.12283 G1 X-51.986 Y32.285 E.02899 G1 X-65.293 Y49.715 E1.12283 G1 X-65.86 Y49.715 E.02899 G1 X-52.552 Y32.285 E1.12283 G1 X-53.118 Y32.285 E.02899 G1 X-66.426 Y49.715 E1.12283 G1 X-66.992 Y49.715 E.02899 G1 X-53.684 Y32.285 E1.12283 G1 X-54.25 Y32.285 E.02899 G1 X-67.558 Y49.715 E1.12283 G1 X-68.124 Y49.715 E.02899 G1 X-54.816 Y32.285 E1.12283 G1 X-55.383 Y32.285 E.02899 G1 X-68.69 Y49.715 E1.12283 G1 X-69.257 Y49.715 E.02899 G1 X-55.949 Y32.285 E1.12283 G1 X-56.515 Y32.285 E.02899 M73 P21 R85 G1 X-69.823 Y49.715 E1.12283 G1 X-70.389 Y49.715 E.02899 G1 X-57.081 Y32.285 E1.12283 G1 X-57.647 Y32.285 E.02899 G1 X-70.955 Y49.715 E1.12283 G1 X-71.521 Y49.715 E.02899 G1 X-58.213 Y32.285 E1.12283 G1 X-58.779 Y32.285 E.02899 G1 X-72.087 Y49.715 E1.12283 G1 X-72.654 Y49.715 E.02899 G1 X-59.346 Y32.285 E1.12283 G1 X-59.912 Y32.285 E.02899 G1 X-73.22 Y49.715 E1.12283 G1 X-73.786 Y49.715 E.02899 G1 X-60.478 Y32.285 E1.12283 G1 X-61.044 Y32.285 E.02899 G1 X-74.352 Y49.715 E1.12283 G1 X-74.918 Y49.715 E.02899 G1 X-71.783 Y45.609 E.26449 G3 X-72.423 Y45.706 I-.728 J-2.671 E.03319 G1 X-75.484 Y49.715 E.2583 G1 X-76.05 Y49.715 E.02899 G1 X-72.947 Y45.65 E.26187 G3 X-73.403 Y45.506 I.602 J-2.703 E.02453 G1 X-76.617 Y49.715 E.27114 G1 X-77.183 Y49.715 E.02899 G1 X-73.799 Y45.284 E.28548 G3 X-74.147 Y44.998 I1.899 J-2.667 E.02307 G1 X-77.749 Y49.715 E.30389 G1 X-78.315 Y49.715 E.02899 G1 X-74.436 Y44.635 E.32726 G3 X-74.668 Y44.197 I2.333 J-1.514 E.02541 G1 X-78.881 Y49.715 E.35548 G1 X-79.447 Y49.715 E.02899 G1 X-74.629 Y43.404 E.40655 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-75.843 Y44.994 ;WIPE_END G1 X-70.295 Y43.66 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-61.61 Y32.285 E.73278 G1 X-62.176 Y32.285 E.02899 G1 X-70.141 Y42.717 E.672 G2 X-70.335 Y42.229 I-2.853 J.854 E.02689 G1 X-62.743 Y32.285 E.64061 G1 X-63.309 Y32.285 E.02899 G1 X-70.593 Y41.825 E.61456 G2 X-70.911 Y41.501 I-1.39 J1.048 E.02334 G1 X-63.875 Y32.285 E.59368 G1 X-64.441 Y32.285 E.02899 G1 X-71.279 Y41.241 E.57695 G2 X-71.707 Y41.06 I-1.136 J2.093 E.02383 G1 X-65.007 Y32.285 E.5653 G1 X-65.573 Y32.285 E.02899 G1 X-72.189 Y40.95 E.55818 G2 X-72.766 Y40.964 I-.24 J2.029 E.02964 G1 X-66.14 Y32.285 E.55907 G1 X-66.706 Y32.285 E.02899 G1 X-73.497 Y41.18 E.57303 G2 X-74.79 Y42.874 I1.007 J2.109 E.11326 G1 X-80.014 Y49.715 E.44072 G1 X-80.58 Y49.715 E.02899 G1 X-67.272 Y32.285 E1.12283 G1 X-67.838 Y32.285 E.02899 G1 X-81.146 Y49.715 E1.12283 G1 X-81.712 Y49.715 E.02899 G1 X-68.404 Y32.285 E1.12283 G1 X-68.97 Y32.285 E.02899 G1 X-82.278 Y49.715 E1.12283 G1 X-82.844 Y49.715 E.02899 G1 X-69.536 Y32.285 E1.12283 G1 X-70.103 Y32.285 E.02899 G1 X-83.316 Y49.592 E1.11487 G1 X-83.294 Y49.481 E.00578 G2 X-83.276 Y48.798 I-2.587 J-.411 E.03512 G1 X-70.669 Y32.285 E1.0637 G1 X-71.235 Y32.285 E.02899 G1 X-83.363 Y48.171 E1.02332 G2 X-83.526 Y47.641 I-2.091 J.351 E.02842 G1 X-71.801 Y32.285 E.98923 G1 X-72.367 Y32.285 E.02899 G1 X-83.743 Y47.184 E.95979 G1 X-84.004 Y46.786 E.02442 G1 X-72.933 Y32.285 E.9341 G1 X-73.5 Y32.285 E.02899 G1 X-84.304 Y46.437 E.91162 G2 X-84.639 Y46.133 I-1.32 J1.118 E.02319 G1 X-73.735 Y31.851 E.92001 G1 X-73.735 Y31.109 E.03797 G1 X-85.006 Y45.873 E.95105 G2 X-85.408 Y45.658 I-1.019 J1.418 E.0234 G1 X-73.735 Y30.368 E.98493 G1 X-73.735 Y29.626 E.03797 G1 X-85.846 Y45.489 E1.02184 G2 X-86.323 Y45.373 I-.68 J1.755 E.02523 G1 X-73.735 Y28.885 E1.06213 G1 X-73.735 Y28.143 E.03797 G1 X-86.848 Y45.319 E1.10643 G1 X-87.434 Y45.345 E.03001 G1 X-73.735 Y27.401 E1.15583 G1 X-73.735 Y26.66 E.03797 G1 X-88.13 Y45.515 E1.21456 G2 X-89.049 Y45.977 I1.191 J3.512 E.05285 G1 X-73.735 Y25.918 E1.29211 G1 X-73.735 Y25.177 E.03797 G1 X-90.428 Y47.042 E1.40847 G1 X-90.665 Y46.987 E.01249 G1 X-90.665 Y46.611 E.0192 G1 X-73.735 Y24.435 E1.42851 G1 X-73.735 Y23.694 E.03797 G1 X-90.665 Y45.87 E1.42851 G1 X-90.665 Y45.128 E.03797 G1 X-73.735 Y22.952 E1.42851 G1 X-73.735 Y22.211 E.03797 G1 X-90.665 Y44.387 E1.42851 G1 X-90.665 Y43.645 E.03797 G1 X-73.735 Y21.469 E1.42851 G1 X-73.735 Y20.727 E.03797 G1 X-90.665 Y42.904 E1.42851 G1 X-90.665 Y42.162 E.03797 G1 X-73.735 Y19.986 E1.42851 G1 X-73.735 Y19.244 E.03797 G1 X-90.665 Y41.421 E1.42851 G1 X-90.665 Y40.679 E.03797 G1 X-73.735 Y18.503 E1.42851 G1 X-73.735 Y17.761 E.03797 G1 X-90.665 Y39.937 E1.42851 G1 X-90.665 Y39.196 E.03797 M73 P22 R85 G1 X-73.735 Y17.02 E1.42851 G1 X-73.735 Y16.278 E.03797 G1 X-90.665 Y38.454 E1.42851 G1 X-90.665 Y37.713 E.03797 G1 X-73.735 Y15.536 E1.42851 G1 X-73.735 Y14.795 E.03797 G1 X-90.665 Y36.971 E1.42851 G1 X-90.665 Y36.23 E.03797 G1 X-73.735 Y14.053 E1.42851 G1 X-73.735 Y13.312 E.03797 G1 X-90.665 Y35.488 E1.42851 G1 X-90.665 Y34.747 E.03797 G1 X-73.735 Y12.57 E1.42851 G1 X-73.735 Y11.829 E.03797 G1 X-90.665 Y34.005 E1.42851 G1 X-90.665 Y33.263 E.03797 G1 X-85.337 Y26.285 E.44955 G1 X-85.903 Y26.285 E.02899 G1 X-90.665 Y32.522 E.40178 G1 X-90.665 Y31.78 E.03797 G1 X-86.47 Y26.285 E.35401 G1 X-87.036 Y26.285 E.02899 G1 X-90.665 Y31.039 E.30624 G1 X-90.665 Y30.297 E.03797 G1 X-87.602 Y26.285 E.25847 G1 X-88.168 Y26.285 E.02899 G1 X-90.665 Y29.556 E.21071 G1 X-90.665 Y28.814 E.03797 G1 X-88.734 Y26.285 E.16294 G1 X-89.3 Y26.285 E.02899 G1 X-90.665 Y28.072 E.11517 G1 X-90.665 Y27.331 E.03797 G1 X-89.735 Y26.112 E.07854 G1 X-89.735 Y25.37 E.03797 G1 X-90.665 Y26.589 E.07854 G1 X-90.665 Y25.848 E.03797 G1 X-89.94 Y24.897 E.06122 G1 X-90.653 Y25.09 E.03784 G1 X-90.868 Y25.371 E.01811 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.657 Y22.129 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-89.532 Y20.656 E.09492 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-90.657 Y22.129 ;WIPE_END G1 X-84.868 Y25.67 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-73.735 Y11.087 E.93935 G1 X-73.735 Y10.346 E.03797 G1 X-84.665 Y24.663 E.92227 G1 X-84.665 Y23.921 E.03797 G1 X-73.735 Y9.604 E.92227 G1 X-73.735 Y8.862 E.03797 G1 X-84.619 Y23.119 E.91833 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-83.405 Y21.529 ;WIPE_END G1 X-75.902 Y22.928 Z2.2 F30000 G1 X-31.368 Y31.234 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-14.235 Y8.792 E1.44559 G1 X-14.235 Y8.051 E.03797 G1 X-31.165 Y30.227 E1.42851 G1 X-31.165 Y29.485 E.03797 G1 X-14.235 Y7.309 E1.42851 G1 X-14.235 Y6.568 E.03797 G1 X-31.165 Y28.744 E1.42851 G1 X-31.165 Y28.002 E.03797 G1 X-14.235 Y5.826 E1.42851 G1 X-14.235 Y5.085 E.03797 G1 X-31.165 Y27.261 E1.42851 G1 X-31.165 Y26.519 E.03797 G1 X-14.235 Y4.343 E1.42851 G1 X-14.235 Y3.601 E.03797 G1 X-31.165 Y25.778 E1.42851 G1 X-31.165 Y25.036 E.03797 G1 X-14.235 Y2.86 E1.42851 G1 X-14.235 Y2.118 E.03797 G1 X-31.165 Y24.295 E1.42851 G1 X-31.165 Y23.553 E.03797 G1 X-14.235 Y1.377 E1.42851 G1 X-14.235 Y.635 E.03797 G1 X-31.165 Y22.811 E1.42851 G1 X-31.165 Y22.07 E.03797 G1 X-14.235 Y-.106 E1.42851 G1 X-14.235 Y-.848 E.03797 G1 X-31.165 Y21.328 E1.42851 G1 X-31.165 Y20.587 E.03797 G1 X-14.235 Y-1.59 E1.42851 G1 X-14.235 Y-2.331 E.03797 G1 X-31.165 Y19.845 E1.42851 G1 X-31.165 Y19.104 E.03797 G1 X-14.242 Y-3.062 E1.42784 G1 X-14.636 Y-3.288 E.02324 G1 X-15.368 Y-2.33 E.06176 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.835 Y-1.718 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-31.165 Y18.362 E1.29347 G1 X-31.165 Y17.621 E.03797 G1 X-16.556 Y-1.515 E1.23266 G1 X-17.122 Y-1.515 E.02899 G1 X-31.165 Y16.879 E1.18489 G1 X-31.165 Y16.137 E.03797 G1 X-17.688 Y-1.515 E1.13712 G1 X-18.254 Y-1.515 E.02899 G1 X-31.165 Y15.396 E1.08936 G1 X-31.165 Y14.654 E.03797 G1 X-18.82 Y-1.515 E1.04159 G1 X-19.387 Y-1.515 E.02899 G1 X-31.165 Y13.913 E.99382 G1 X-31.165 Y13.171 E.03797 G1 X-19.953 Y-1.515 E.94605 G1 X-20.235 Y-1.515 E.01443 G1 X-20.235 Y-1.888 E.01907 G1 X-31.165 Y12.43 E.92227 G1 X-31.165 Y11.688 E.03797 G1 X-20.235 Y-2.629 E.92227 G1 X-20.235 Y-3.216 E.03006 G1 X-20.358 Y-3.209 E.00633 G1 X-31.165 Y10.946 E.91186 G1 X-31.165 Y10.205 E.03797 G1 X-20.443 Y-3.84 E.9047 G1 X-20.235 Y-4.373 E.02932 G1 X-20.235 Y-4.854 E.02463 G1 X-31.165 Y9.463 E.92227 G1 X-31.165 Y8.722 E.03797 G1 X-20.372 Y-5.416 E.91069 G1 X-20.716 Y-5.386 E.01767 G1 X-20.453 Y-6.051 E.03657 G1 X-31.165 Y7.98 E.9038 G1 X-31.165 Y7.715 E.01356 G1 X-31.529 Y7.715 E.01864 G1 X-20.235 Y-7.079 E.95298 G1 X-20.235 Y-7.485 E.02078 G1 X-19.927 Y-7.485 E.01575 G1 X-19.784 Y-8.104 E.03254 G1 X-19.962 Y-8.177 E.00985 G1 X-32.096 Y7.715 E1.02375 G1 X-32.662 Y7.715 E.02899 G1 X-20.357 Y-8.401 E1.03818 G1 X-20.48 Y-8.477 E.00737 G1 X-20.696 Y-8.699 E.01588 G1 X-33.228 Y7.715 E1.05737 G1 X-33.794 Y7.715 E.02899 G1 X-20.681 Y-9.46 E1.10635 G1 X-20.137 Y-10.64 E.06655 G1 X-20.342 Y-10.646 E.01048 G1 X-34.36 Y7.715 E1.1828 G1 X-34.926 Y7.715 E.02899 G1 X-20.448 Y-11.249 E1.22158 G1 X-20.282 Y-11.715 E.02537 G1 X-20.658 Y-11.715 E.01923 G1 X-35.493 Y7.715 E1.25166 G1 X-36.059 Y7.715 E.02899 G1 X-20.735 Y-12.356 E1.29294 G1 X-20.735 Y-13.098 E.03797 G1 X-36.625 Y7.715 E1.34071 G1 X-37.191 Y7.715 E.02899 G1 X-20.735 Y-13.839 E1.38848 G1 X-20.735 Y-14.581 E.03797 G1 X-37.757 Y7.715 E1.43625 G1 X-38.323 Y7.715 E.02899 G1 X-20.735 Y-15.323 E1.48402 G1 X-20.735 Y-16.064 E.03797 G1 X-38.889 Y7.715 E1.53178 G1 X-39.456 Y7.715 E.02899 G1 X-20.735 Y-16.806 E1.57955 G1 X-20.735 Y-17.547 E.03797 G1 X-40.022 Y7.715 E1.62732 G1 X-40.588 Y7.715 E.02899 G1 X-20.735 Y-18.289 E1.67509 G1 X-20.735 Y-19.03 E.03797 G1 X-41.154 Y7.715 E1.72286 G1 X-41.72 Y7.715 E.02899 M73 P22 R84 G1 X-20.735 Y-19.772 E1.77063 G1 X-20.735 Y-20.513 E.03797 G1 X-42.286 Y7.715 E1.81839 G1 X-42.853 Y7.715 E.02899 G1 X-20.735 Y-21.255 E1.86616 G1 X-20.735 Y-21.997 E.03797 G1 X-43.419 Y7.715 E1.91393 G1 X-43.985 Y7.715 E.02899 G1 X-20.735 Y-22.738 E1.9617 G1 X-20.735 Y-23.48 E.03797 G1 X-44.551 Y7.715 E2.00947 G1 X-45.117 Y7.715 E.02899 G1 X-20.735 Y-24.221 E2.05724 G1 X-20.735 Y-24.715 E.0253 G1 X-20.923 Y-24.715 E.00967 G1 X-45.683 Y7.715 E2.08907 G1 X-46.249 Y7.715 E.02899 G1 X-21.49 Y-24.715 E2.08907 G1 X-22.056 Y-24.715 E.02899 G1 X-46.816 Y7.715 E2.08907 G1 X-47.382 Y7.715 E.02899 G1 X-22.622 Y-24.715 E2.08907 G1 X-23.188 Y-24.715 E.02899 G1 X-47.948 Y7.715 E2.08907 G1 X-48.514 Y7.715 E.02899 G1 X-23.754 Y-24.715 E2.08907 G1 X-24.32 Y-24.715 E.02899 G1 X-49.08 Y7.715 E2.08907 G1 X-49.646 Y7.715 E.02899 G1 X-24.887 Y-24.715 E2.08907 G1 X-25.453 Y-24.715 E.02899 G1 X-50.213 Y7.715 E2.08907 G1 X-50.779 Y7.715 E.02899 G1 X-41.433 Y-4.525 E.78849 G2 X-40.103 Y-6.268 I-1.015 J-2.154 E.11664 G1 X-26.019 Y-24.715 E1.18833 G1 X-26.585 Y-24.715 E.02899 G1 X-40.09 Y-7.026 E1.13946 G2 X-40.243 Y-7.567 I-2.069 J.294 E.02887 G1 X-27.151 Y-24.715 E1.10461 G1 X-27.717 Y-24.715 E.02899 G1 X-40.473 Y-8.008 E1.0762 G2 X-40.763 Y-8.369 I-2.89 J2.031 E.02374 G1 X-28.284 Y-24.715 E1.05295 G1 X-28.85 Y-24.715 E.02899 G1 X-41.114 Y-8.652 E1.03474 G2 X-41.511 Y-8.873 I-1.038 J1.399 E.02335 G1 X-29.416 Y-24.715 E1.0205 G1 X-29.982 Y-24.715 E.02899 G1 X-41.97 Y-9.013 E1.01146 G2 X-42.497 Y-9.064 I-.52 J2.629 E.02717 G1 X-30.548 Y-24.715 E1.00819 G1 X-31.114 Y-24.715 E.02899 G1 X-43.377 Y-8.653 E1.03468 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-42.164 Y-10.243 ;WIPE_END G1 X-41.98 Y-4.551 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-51.345 Y7.715 E.79016 G1 X-51.911 Y7.715 E.02899 G1 X-42.729 Y-4.311 E.77469 G3 X-43.21 Y-4.422 I.401 J-2.824 E.02532 G1 X-52.477 Y7.715 E.78187 G1 X-53.043 Y7.715 E.02899 G1 X-43.635 Y-4.608 E.79383 G3 X-44 Y-4.871 I1.776 J-2.854 E.02307 G1 X-53.61 Y7.715 E.81077 G1 X-54.176 Y7.715 E.02899 G1 X-44.318 Y-5.197 E.83175 G3 X-44.572 Y-5.605 I1.921 J-1.479 E.02468 G1 X-54.742 Y7.715 E.85806 G1 X-55.308 Y7.715 E.02899 G1 X-44.763 Y-6.097 E.88973 G3 X-44.833 Y-6.746 I2.596 J-.609 E.03354 G1 X-55.874 Y7.715 E.93158 G1 X-56.44 Y7.715 E.02899 G1 X-31.68 Y-24.715 E2.08907 G1 X-32.247 Y-24.715 E.02899 G1 X-57.006 Y7.715 E2.08907 G1 X-57.573 Y7.715 E.02899 G1 X-32.813 Y-24.715 E2.08907 G1 X-33.379 Y-24.715 E.02899 G1 X-58.139 Y7.715 E2.08907 G1 X-58.705 Y7.715 E.02899 G1 X-33.945 Y-24.715 E2.08907 G1 X-34.511 Y-24.715 E.02899 G1 X-59.271 Y7.715 E2.08907 G1 X-59.837 Y7.715 E.02899 G1 X-35.077 Y-24.715 E2.08907 G1 X-35.644 Y-24.715 E.02899 G1 X-60.403 Y7.715 E2.08907 G1 X-60.97 Y7.715 E.02899 G1 X-36.21 Y-24.715 E2.08907 G1 X-36.776 Y-24.715 E.02899 G1 X-61.536 Y7.715 E2.08907 G1 X-62.102 Y7.715 E.02899 M73 P23 R84 G1 X-37.342 Y-24.715 E2.08907 G1 X-37.908 Y-24.715 E.02899 G1 X-62.668 Y7.715 E2.08907 G1 X-63.234 Y7.715 E.02899 G1 X-38.474 Y-24.715 E2.08907 G1 X-39.04 Y-24.715 E.02899 G1 X-63.8 Y7.715 E2.08907 G1 X-64.367 Y7.715 E.02899 G1 X-39.607 Y-24.715 E2.08907 G1 X-40.173 Y-24.715 E.02899 G1 X-64.933 Y7.715 E2.08907 G1 X-65.499 Y7.715 E.02899 G1 X-40.739 Y-24.715 E2.08907 G1 X-41.305 Y-24.715 E.02899 G1 X-66.065 Y7.715 E2.08907 G1 X-66.631 Y7.715 E.02899 G1 X-41.871 Y-24.715 E2.08907 G1 X-42.437 Y-24.715 E.02899 G1 X-67.197 Y7.715 E2.08907 G1 X-67.763 Y7.715 E.02899 G1 X-43.004 Y-24.715 E2.08907 G1 X-43.57 Y-24.715 E.02899 G1 X-68.33 Y7.715 E2.08907 G1 X-68.896 Y7.715 E.02899 G1 X-44.136 Y-24.715 E2.08907 G1 X-44.702 Y-24.715 E.02899 G1 X-69.462 Y7.715 E2.08907 G1 X-70.028 Y7.715 E.02899 G1 X-45.268 Y-24.715 E2.08907 G1 X-45.834 Y-24.715 E.02899 G1 X-70.594 Y7.715 E2.08907 G1 X-71.16 Y7.715 E.02899 G1 X-61.948 Y-4.351 E.77727 G3 X-62.554 Y-4.299 I-.508 J-2.387 E.03119 G1 X-71.727 Y7.715 E.77395 G1 X-72.293 Y7.715 E.02899 G1 X-63.063 Y-4.373 E.7787 G3 X-63.501 Y-4.542 I1.014 J-3.275 E.02402 G1 X-73.013 Y7.918 E.80262 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.868 Y22.704 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-63.888 Y-4.776 E1.77012 G3 X-64.219 Y-5.084 I1.996 J-2.473 E.02317 G1 X-84.665 Y21.697 E1.72512 G1 X-84.665 Y21.499 E.01013 G1 X-84.236 Y20.393 E.06074 G1 X-64.499 Y-5.459 E1.66527 G1 X-64.52 Y-5.49 E.00189 G3 X-64.709 Y-5.925 I2.126 J-1.186 E.02436 G1 X-84.665 Y20.211 E1.68363 G1 X-84.665 Y19.715 E.02535 G1 X-84.851 Y19.715 E.00951 G1 X-64.628 Y-6.773 E1.70627 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-65.842 Y-5.183 ;WIPE_END G1 X-60.275 Y-6.543 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-46.401 Y-24.715 E1.1706 G1 X-46.967 Y-24.715 E.02899 G1 X-60.181 Y-7.407 E1.11494 G2 X-60.386 Y-7.88 I-6.012 J2.332 E.02639 G1 X-47.533 Y-24.715 E1.0845 G1 X-48.099 Y-24.715 E.02899 G1 X-60.664 Y-8.257 E1.06019 G2 X-60.992 Y-8.57 I-1.351 J1.087 E.02325 G1 X-48.665 Y-24.715 E1.04004 G1 X-49.231 Y-24.715 E.02899 G1 X-61.377 Y-8.807 E1.02476 G2 X-61.812 Y-8.979 I-.871 J1.566 E.02401 G1 X-49.797 Y-24.715 E1.01368 G1 X-50.364 Y-24.715 E.02899 G1 X-62.317 Y-9.059 E1.00855 G2 X-62.92 Y-9.011 I-.135 J2.127 E.03105 G1 X-50.93 Y-24.715 E1.01161 G1 X-51.496 Y-24.715 E.02899 G1 X-85.417 Y19.715 E2.86206 G1 X-85.984 Y19.715 E.02899 G1 X-52.062 Y-24.715 E2.86206 G1 X-52.628 Y-24.715 E.02899 G1 X-86.55 Y19.715 E2.86206 G1 X-87.116 Y19.715 E.02899 G1 X-53.194 Y-24.715 E2.86206 G1 X-53.761 Y-24.715 E.02899 G1 X-87.682 Y19.715 E2.86206 G1 X-88.248 Y19.715 E.02899 G1 X-54.327 Y-24.715 E2.86206 G1 X-54.893 Y-24.715 E.02899 M73 P23 R83 G1 X-88.969 Y19.918 E2.8751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.868 Y21.664 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-55.459 Y-24.715 E2.98756 G1 X-56.025 Y-24.715 E.02899 G1 X-90.665 Y20.657 E2.9227 G1 X-90.665 Y19.915 E.03797 G1 X-56.591 Y-24.715 E2.87494 G1 X-57.157 Y-24.715 E.02899 G1 X-90.665 Y19.174 E2.82717 G1 X-90.665 Y18.432 E.03797 G1 X-57.724 Y-24.715 E2.7794 G1 X-58.29 Y-24.715 E.02899 G1 X-90.665 Y17.691 E2.73163 G1 X-90.665 Y16.949 E.03797 G1 X-58.856 Y-24.715 E2.68386 G1 X-59.422 Y-24.715 E.02899 G1 X-90.665 Y16.208 E2.63609 G1 X-90.665 Y15.466 E.03797 G1 X-59.988 Y-24.715 E2.58833 G1 X-60.554 Y-24.715 E.02899 G1 X-90.665 Y14.724 E2.54056 G1 X-90.665 Y13.983 E.03797 G1 X-61.121 Y-24.715 E2.49279 G1 X-61.687 Y-24.715 E.02899 G1 X-90.665 Y13.241 E2.44502 G1 X-90.665 Y12.5 E.03797 G1 X-62.253 Y-24.715 E2.39725 G1 X-62.819 Y-24.715 E.02899 G1 X-90.665 Y11.758 E2.34948 G1 X-90.665 Y11.017 E.03797 G1 X-63.385 Y-24.715 E2.30171 G1 X-63.951 Y-24.715 E.02899 G1 X-90.665 Y10.275 E2.25395 G1 X-90.665 Y9.533 E.03797 G1 X-64.518 Y-24.715 E2.20618 G1 X-65.084 Y-24.715 E.02899 G1 X-90.665 Y8.792 E2.15841 G1 X-90.665 Y8.05 E.03797 G1 X-65.65 Y-24.715 E2.11064 G1 X-66.216 Y-24.715 E.02899 G1 X-90.665 Y7.309 E2.06287 G1 X-90.665 Y6.567 E.03797 G1 X-66.782 Y-24.715 E2.0151 G1 X-67.348 Y-24.715 E.02899 G1 X-84.665 Y-2.033 E1.4611 G1 X-84.665 Y-1.515 E.02651 G1 X-85.061 Y-1.515 E.02024 G1 X-90.665 Y5.826 E.47288 G1 X-90.665 Y5.084 E.03797 G1 X-85.627 Y-1.515 E.42511 G1 X-86.193 Y-1.515 E.02899 G1 X-90.665 Y4.343 E.37735 G1 X-90.665 Y3.601 E.03797 G1 X-86.759 Y-1.515 E.32958 G1 X-87.325 Y-1.515 E.02899 G1 X-90.665 Y2.859 E.28181 G1 X-90.665 Y2.118 E.03797 G1 X-87.892 Y-1.515 E.23404 G1 X-88.458 Y-1.515 E.02899 G1 X-90.665 Y1.376 E.18627 G1 X-90.665 Y.635 E.03797 G1 X-89.024 Y-1.515 E.1385 G1 X-89.59 Y-1.515 E.02899 G1 X-90.665 Y-.107 E.09074 G1 X-90.665 Y-.848 E.03797 G1 X-89.735 Y-2.068 E.07854 G1 X-89.735 Y-2.809 E.03797 G1 X-90.665 Y-1.59 E.07854 G1 X-90.665 Y-2.332 E.03797 G1 X-89.532 Y-3.816 E.09562 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-90.665 Y-2.332 G1 X-90.665 Y-2.199 ;WIPE_END G1 X-84.868 Y-2.51 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X-67.914 Y-24.715 E1.43041 G1 X-68.481 Y-24.715 E.02899 G1 X-84.665 Y-3.516 E1.36556 G1 X-84.665 Y-4.258 E.03797 G1 X-69.047 Y-24.715 E1.31779 G1 X-69.613 Y-24.715 E.02899 G1 X-84.11 Y-5.728 E1.22312 G1 X-84.06 Y-5.844 E.00649 G1 X-84.665 Y-5.699 E.03185 G1 X-84.665 Y-5.741 E.00214 G1 X-70.179 Y-24.715 E1.22226 G1 X-70.745 Y-24.715 E.02899 G1 X-84.665 Y-6.483 E1.17449 G1 X-84.665 Y-7.224 E.03797 G1 X-71.311 Y-24.715 E1.12672 G1 X-71.878 Y-24.715 E.02899 G1 X-83.977 Y-8.868 E1.02085 G1 X-83.915 Y-9.005 E.00769 G1 X-84.38 Y-9.081 E.02412 G1 X-72.444 Y-24.715 E1.00713 G1 X-73.01 Y-24.715 E.02899 G1 X-84.848 Y-9.21 E.9988 G1 X-84.151 Y-10.789 E.08836 G1 X-84.183 Y-10.822 E.00234 G1 X-73.576 Y-24.715 E.89497 G1 X-74.142 Y-24.715 E.02899 G1 X-84.499 Y-11.15 E.87386 G1 X-84.433 Y-11.715 E.02917 G1 X-84.165 Y-11.715 E.01371 G1 X-84.165 Y-12.328 E.03139 G1 X-74.708 Y-24.715 E.79792 G1 X-75.275 Y-24.715 E.02899 G1 X-84.165 Y-13.07 E.75015 G1 X-84.165 Y-13.812 E.03797 G1 X-75.841 Y-24.715 E.70238 G1 X-76.407 Y-24.715 E.02899 G1 X-84.165 Y-14.553 E.65462 G1 X-84.165 Y-15.295 E.03797 G1 X-76.973 Y-24.715 E.60685 G1 X-77.539 Y-24.715 E.02899 G1 X-84.165 Y-16.036 E.55908 G1 X-84.165 Y-16.778 E.03797 G1 X-78.105 Y-24.715 E.51131 G1 X-78.671 Y-24.715 E.02899 G1 X-84.165 Y-17.519 E.46354 G1 X-84.165 Y-18.261 E.03797 G1 X-79.238 Y-24.715 E.41577 G1 X-79.804 Y-24.715 E.02899 G1 X-84.165 Y-19.002 E.36801 G1 X-84.165 Y-19.744 E.03797 G1 X-80.37 Y-24.715 E.32024 G1 X-80.936 Y-24.715 E.02899 G1 X-84.165 Y-20.486 E.27247 G1 X-84.165 Y-21.227 E.03797 G1 X-81.502 Y-24.715 E.2247 G1 X-82.068 Y-24.715 E.02899 G1 X-84.165 Y-21.969 E.17693 G1 X-84.165 Y-22.71 E.03797 G1 X-82.635 Y-24.715 E.12916 G1 X-83.201 Y-24.715 E.02899 G1 X-84.165 Y-23.452 E.0814 G1 X-84.165 Y-24.193 E.03797 G1 X-83.612 Y-24.918 E.04667 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X-84.165 Y-24.193 G1 X-84.165 Y-23.452 G1 X-83.955 Y-23.728 ;WIPE_END G1 X-86.378 Y-16.49 Z2.2 F30000 G1 X-87.694 Y-12.558 Z2.2 G1 Z1.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.161122 ;HEIGHT:0.2 G1 F12000 M106 S255 G1 X-87.484 Y-12.501 E.00209 G1 X-87.346 Y-12.38 E.00177 ;WIDTH:0.11913 G1 X-87.208 Y-12.259 E.00114 G1 X-90.244 Y-12.572 F30000 ;WIDTH:0.401722 G1 F12000 G1 X-91.522 Y-12.138 E.03949 G1 X-91.088 Y-12.572 F30000 ;WIDTH:0.41802 G1 F12000 G1 X-91.522 Y-11.294 E.04128 G1 X-91.508 Y-8.744 F30000 ;WIDTH:0.161125 G1 F12000 G1 X-91.451 Y-8.534 E.00209 G1 X-91.33 Y-8.396 E.00177 ;WIDTH:0.119134 G1 X-91.209 Y-8.258 E.00114 G1 X-89.953 Y-4.173 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.537303 G1 F15000 G1 X-89.953 Y-6.244 E.08343 G1 X-90.447 Y-6.394 E.02081 G1 X-90.447 Y-3.791 E.10486 G1 X-89.984 Y-4.148 E.02356 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.953 Y21.926 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537303 G1 F15000 G1 X-90.447 Y22.308 E.02517 G1 X-90.447 Y24.55 E.09033 G1 X-89.953 Y24.425 E.02054 G1 X-89.953 Y21.966 E.09908 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.447 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.43562 G1 F12000 G2 X-90.507 Y47.54 I4.02 J1.063 E.00865 ;WIDTH:0.397645 G1 X-90.527 Y47.659 E.00351 ;WIDTH:0.358142 G1 X-90.547 Y47.779 E.00311 ;WIDTH:0.318639 G1 X-90.566 Y47.899 E.00272 ;WIDTH:0.276878 G1 X-90.588 Y48.032 E.00258 ;WIDTH:0.232118 G1 X-90.612 Y48.272 E.00371 ;WIDTH:0.184233 G1 X-90.636 Y48.519 E.00286 ;WIDTH:0.14478 G1 X-90.651 Y49.003 E.00402 G2 X-90.635 Y49.489 I7.429 J-.004 E.00404 ;WIDTH:0.161417 G1 X-90.61 Y49.744 E.00248 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.635 Y49.489 ;WIPE_END G1 X-83.006 Y49.267 Z2.2 F30000 G1 X-14.453 Y47.276 Z2.2 G1 Z1.8 G1 E.8 F1800 ;WIDTH:0.427283 G1 F12000 G1 X-14.398 Y47.515 E.00768 ;WIDTH:0.401913 G3 X-14.373 Y47.659 I-2.178 J.447 E.00429 ;WIDTH:0.358147 G1 X-14.353 Y47.779 E.00311 ;WIDTH:0.318644 G1 X-14.334 Y47.899 E.00272 ;WIDTH:0.279141 G1 X-14.314 Y48.018 E.00233 ;WIDTH:0.257538 G1 X-14.312 Y48.032 E.00025 ;WIDTH:0.232125 G1 X-14.288 Y48.272 E.00371 ;WIDTH:0.184997 G1 X-14.265 Y48.511 E.00278 ;WIDTH:0.144792 G3 X-14.249 Y48.997 I-7.384 J.489 E.00404 G1 X-14.264 Y49.481 E.00402 ;WIDTH:0.178483 G1 X-14.29 Y49.744 E.00292 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.264 Y49.481 ;WIPE_END G1 X-12.598 Y42.033 Z2.2 F30000 G1 X6.16 Y-41.79 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 M73 P24 R83 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z2.2 F30000 G1 X74.198 Y15.448 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z2.2 F30000 G1 X90.96 Y7.29 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z2.2 F30000 G1 X75.04 Y16.29 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X75.349 Y15.237 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.03444 G1 X76.387 Y14.647 E.01958 G2 X75.153 Y14.088 I-1.361 J1.364 E.0459 G2 X74.313 Y14.625 I.071 J1.037 E.0345 G1 X74.313 Y13.107 E.05036 G1 X74.498 Y12.967 E.00768 G1 X75.153 Y12.079 E.03662 G1 X75.809 Y11.629 E.02636 G1 X76.387 Y11.486 E.01976 G1 X76.387 Y9.405 E.06902 G2 X75.153 Y8.846 I-1.361 J1.364 E.0459 G2 X74.313 Y9.383 I.071 J1.037 E.0345 G1 X74.321 Y7.763 E.05375 G1 X77.223 Y7 F30000 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X91.178 Y7 E.1651 G1 X91.226 Y7.024 E.00064 ;WIDTH:0.260421 G1 X91.274 Y7.048 E.00096 ;WIDTH:0.308755 G1 X91.323 Y7.073 E.00117 ;WIDTH:0.346671 G1 X91.336 Y7.086 E.00048 ;WIDTH:0.374169 G1 X91.35 Y7.1 E.00052 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.24737 G1 X91.336 Y15.914 E.00055 ;WIDTH:0.346671 G1 X91.323 Y15.928 E.00048 ;WIDTH:0.308756 G1 X91.274 Y15.952 E.00117 ;WIDTH:0.260422 G1 X91.226 Y15.976 E.00096 ;WIDTH:0.212089 G1 X91.178 Y16 E.00074 ;WIDTH:0.187921 G1 X77.223 Y16 E.16489 G1 X74.15 Y15.651 F30000 ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X69.268 Y21.519 Z2.2 F30000 G1 X55.548 Y38.01 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z2.2 F30000 G1 Z1.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z2.2 F30000 G1 X33.195 Y38.745 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z2.2 F30000 G1 X3.102 Y40.648 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z2.2 F30000 G1 X33.602 Y39.152 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z2.2 F30000 G1 X2.695 Y41.055 Z2.2 G1 Z1.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 ;LAYER_CHANGE ;Z:2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END ;AFTER_LAYER_CHANGE ;2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.4 I1.128 J-.456 P1 F30000 G1 X-16.24 Y-6.41 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-19.244 Y2.614 Z2.4 F30000 G1 X-31.398 Y31.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.032 Y25.231 Z2.4 F30000 G1 X-64.59 Y-6.457 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.603 Y-6.68 E.0074 G3 X-62.631 Y-8.822 I2.152 J.002 E.1061 G3 X-60.427 Y-7.409 I.18 J2.144 E.09335 G3 X-64.585 Y-6.399 I-2.024 J.731 E.23972 G1 X-64.587 Y-6.418 E.00062 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y-6.484 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.193 Y-6.68 E.00651 G3 X-62.604 Y-8.416 I1.743 J0 E.08569 G3 X-63.185 Y-5.099 I.157 J1.737 E.21218 G3 X-64.177 Y-6.445 I.735 J-1.581 E.05783 G1 X-63.749 Y-6.512 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.766 Y-6.68 E.00517 G3 X-62.951 Y-7.891 I1.309 J.001 E.04756 G3 X-62.576 Y-7.982 I.531 J1.362 E.01192 G3 X-63.751 Y-6.476 I.118 J1.304 E.18694 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.766 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.707 Y-7.96 ;WIPE_END G1 X-55.106 Y-7.271 Z2.4 F30000 G1 X-40.43 Y-5.942 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.462 Y-5.857 E.00301 G3 X-42.631 Y-8.822 I-1.989 J-.821 E.30248 G3 X-40.427 Y-7.409 I.18 J2.144 E.09335 G3 X-40.372 Y-6.123 I-2.024 J.731 E.04336 G1 X-40.418 Y-5.98 E.005 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.816 Y-6.072 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.837 Y-6.012 E.00213 G3 X-43.185 Y-5.099 I-1.611 J-.668 E.09338 G3 X-42.604 Y-8.416 I.735 J-1.581 E.15135 G3 X-40.763 Y-6.228 I.157 J1.737 E.11122 G1 X-40.803 Y-6.11 E.00413 G1 X-41.228 Y-6.212 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.246 Y-6.181 E.0011 G3 X-42.951 Y-7.891 I-1.211 J-.497 E.1583 G3 X-42.576 Y-7.982 I.531 J1.362 E.01192 G3 X-41.192 Y-6.343 I.118 J1.304 E.07726 G1 X-41.217 Y-6.251 E.00294 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.246 Y-6.181 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.83 Y-5.429 ;WIPE_END G1 X-38.27 Y.691 Z2.4 F30000 G1 X-20.002 Y25.21 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.23 Y29.653 Z2.4 F30000 G1 X-33.191 Y45.339 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.275 Y45.313 E.00291 G3 X-33.761 Y41.611 I.818 J-1.99 E.14993 G3 X-32.631 Y41.178 I1.325 J1.765 E.04069 G3 X-33.008 Y45.403 I.174 J2.145 E.2485 G1 X-33.154 Y45.352 E.00512 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.061 Y44.953 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.119 Y44.935 E.00203 G3 X-33.323 Y41.808 I.661 J-1.614 E.12918 G3 X-32.604 Y41.584 I.852 J1.469 E.02519 G3 X-32.902 Y45.008 I.147 J1.738 E.20151 G1 X-33.023 Y44.966 E.00423 G1 X-32.918 Y44.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.533 E.00107 G3 X-32.951 Y42.109 I.495 J-1.212 E.09519 G3 X-32.576 Y42.018 I.531 J1.363 E.01192 G3 X-32.621 Y44.62 I.118 J1.304 E.13506 G1 X-32.88 Y44.55 E.00823 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.7 Y42.942 ;WIPE_END G1 X-41.318 Y43.405 Z2.4 F30000 G1 X-73.183 Y45.341 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.275 Y45.313 E.00322 G3 X-73.761 Y41.611 I.818 J-1.99 E.14993 G3 X-72.631 Y41.178 I1.325 J1.765 E.04069 G3 X-73.008 Y45.403 I.174 J2.145 E.2485 G1 X-73.145 Y45.355 E.00481 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.052 Y44.956 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.119 Y44.935 E.00233 G3 X-73.323 Y41.808 I.661 J-1.614 E.12918 G3 X-72.604 Y41.584 I.852 J1.469 E.02519 G3 X-72.902 Y45.008 I.147 J1.738 E.20151 G1 X-73.014 Y44.969 E.00392 G1 X-72.909 Y44.542 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.952 Y44.533 E.00135 G3 X-72.951 Y42.109 I.495 J-1.212 E.09518 G3 X-72.576 Y42.018 I.531 J1.362 E.01192 G3 X-72.621 Y44.62 I.118 J1.304 E.13506 G1 X-72.871 Y44.552 E.00795 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.952 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.703 Y42.951 ;WIPE_END G1 X-77.864 Y36.552 Z2.4 F30000 G1 X-88.66 Y19.948 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-79.786 Y17.485 Z2.4 F30000 G1 X-18.794 Y-11.948 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-18.044 Y-7.252 I2.847 J1.953 E.174 G1 X-20.002 Y-7.252 E.06494 G1 X-20.002 Y-1.748 E.18258 G1 X-15.398 Y-1.748 E.15273 G1 X-15.398 Y-6.595 E.1608 G2 X-14.002 Y-7.156 I-.443 J-3.121 E.05038 G1 X-14.002 Y49.948 E1.89424 G1 X-14.624 Y49.948 E.02063 G2 X-21.276 Y49.948 I-3.326 J-.94 E.42337 M73 P24 R82 G1 X-83.624 Y49.948 E2.0682 G2 X-90.276 Y49.948 I-3.326 J-.94 E.42337 G1 X-90.898 Y49.948 E.02063 G1 X-90.898 Y-7.156 E1.89424 G2 X-89.502 Y-6.595 I1.839 J-2.561 E.05038 G1 X-89.502 Y-1.748 E.1608 G1 X-84.898 Y-1.748 E.15273 G1 X-84.898 Y-7.252 E.18258 G1 X-86.856 Y-7.252 E.06494 G2 X-86.106 Y-11.948 I-2.097 J-2.743 E.174 G1 X-84.398 Y-11.948 E.05666 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-18.834 Y-11.948 E.05533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.928 Y-12.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-18.367 Y-11.855 E.02208 G2 X-16.715 Y-7.049 I2.433 J1.85 E.19898 G1 X-16.749 Y-6.845 E.00687 G1 X-19.595 Y-6.845 E.09441 G1 X-19.595 Y-2.155 E.15558 G1 X-15.805 Y-2.155 E.12572 G1 X-15.805 Y-6.963 E.15949 G2 X-14.095 Y-7.583 I-.161 J-3.109 E.06121 G1 X-13.595 Y-8.022 E.02208 G1 X-13.595 Y50.355 E1.93647 G1 X-15.229 Y50.355 E.0542 G2 X-20.671 Y50.355 I-2.721 J-1.36 E.41051 G1 X-84.229 Y50.355 E2.10832 G2 X-89.671 Y50.355 I-2.721 J-1.36 E.41051 G1 X-91.305 Y50.355 E.0542 G1 X-91.305 Y-8.022 E1.93647 G1 X-90.805 Y-7.583 E.02208 G2 X-89.095 Y-6.963 I1.87 J-2.489 E.06121 G1 X-89.095 Y-2.155 E.15949 G1 X-85.305 Y-2.155 E.12572 G1 X-85.305 Y-6.845 E.15558 G1 X-88.151 Y-6.845 E.09442 G1 X-88.185 Y-7.049 E.00687 G2 X-86.533 Y-11.855 I-.781 J-2.955 E.19898 G1 X-86.972 Y-12.355 E.02208 G1 X-84.805 Y-12.355 E.07189 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-17.968 Y-12.355 E.07056 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-18.367 Y-11.855 G1 X-18.588 Y-11.523 G1 X-18.764 Y-11.166 G1 X-18.893 Y-10.788 G1 X-18.925 Y-10.627 ;WIPE_END G1 X-15.264 Y-12.518 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-14.952 Y-12.409 E.01015 G3 X-15.95 Y-7.39 I-1.003 J2.41 E.22016 G3 X-16.291 Y-12.588 I.006 J-2.611 E.24116 G3 X-15.303 Y-12.527 I.335 J2.588 E.0306 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.952 Y-12.409 G1 X-14.645 Y-12.261 G1 X-14.361 Y-12.071 G1 X-14.104 Y-11.846 G1 X-13.879 Y-11.589 G1 X-13.732 Y-11.369 ;WIPE_END G1 X-21.348 Y-10.865 Z2.4 F30000 G1 X-88.66 Y-6.41 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-90.264 Y-7.745 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-90.537 Y-7.932 E.01014 G3 X-89.291 Y-12.588 I1.593 J-2.069 E.1887 G3 X-88.95 Y-7.39 I.335 J2.588 E.26214 G3 X-90.229 Y-7.728 I.006 J-2.611 E.04109 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.537 Y-7.932 G1 X-90.796 Y-8.154 G1 X-91.021 Y-8.411 G1 X-91.211 Y-8.695 G1 X-91.362 Y-9.001 G1 X-91.447 Y-9.252 ;WIPE_END G1 X-83.824 Y-9.627 Z2.4 F30000 G1 X-19.66 Y-12.79 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-16.055 Y50.79 E.08896 G2 X-19.845 Y50.79 I-1.895 J-1.792 E.37321 G1 X-85.055 Y50.79 E2.00373 G2 X-88.845 Y50.79 I-1.895 J-1.792 E.37321 G1 X-91.74 Y50.79 E.08896 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-17.692 Y-12.259 Z2.4 F30000 G1 Z2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.141341 G1 F12000 G1 X-17.554 Y-12.38 E.00147 ;WIDTH:0.163551 G1 X-17.416 Y-12.501 E.00181 ;WIDTH:0.17539 G1 X-17.206 Y-12.558 E.00235 G1 X-14.656 Y-12.572 F30000 ;WIDTH:0.418035 G1 F12000 G1 X-13.377 Y-12.138 E.04129 G1 X-13.812 Y-12.572 F30000 ;WIDTH:0.401732 G1 F12000 G1 X-13.377 Y-11.294 E.03949 G1 X-13.392 Y-8.744 F30000 ;WIDTH:0.175391 G1 F12000 G1 X-13.449 Y-8.534 E.00235 ;WIDTH:0.163549 G1 X-13.57 Y-8.396 E.00181 ;WIDTH:0.14134 G1 X-13.691 Y-8.258 E.00147 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-13.57 Y-8.396 ;WIPE_END G1 X-18.733 Y-7.574 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-18.797 Y-7.537 E.00204 G1 X-18.732 Y-7.503 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-18.797 Y-7.537 G1 X-18.733 Y-7.574 ;WIPE_END G1 X-14.947 Y-2.211 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537302 G1 F15000 G3 X-14.656 Y-2.439 I.509 J.349 E.01512 G1 X-14.453 Y-2.375 E.0086 G1 X-14.453 Y-6.394 E.1619 G1 X-14.947 Y-6.244 E.02081 G1 X-14.947 Y-2.251 E.16087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.453 Y19.744 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.542627 G1 F15000 G1 X-14.471 Y18.835 E.03702 G1 X-15.144 Y19.508 E.03874 G1 X-14.947 Y19.621 E.00922 G1 X-14.947 Y25.519 E.24019 G3 X-14.691 Y25.357 I.333 J.244 E.01262 G1 X-14.453 Y25.485 E.01101 G1 X-14.453 Y19.784 E.23212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.905 Y45.758 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-15.387 Y46.141 E.01981 G1 X-14.906 Y46.649 E.02148 G1 X-14.713 Y46.934 E.01059 G1 X-14.394 Y46.86 E.01006 G1 X-14.394 Y44.247 E.08029 G1 X-15.877 Y45.73 E.06443 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.292 Y45.701 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.452784 G1 F15000 G1 X-14.788 Y46.187 E.02338 G1 X-14.788 Y45.197 E.03306 G1 X-15.264 Y45.673 E.0225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.453 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.427291 G1 F12000 G1 X-14.398 Y47.515 E.00768 ;WIDTH:0.401919 G3 X-14.373 Y47.659 I-2.181 J.447 E.00429 ;WIDTH:0.358151 G1 X-14.353 Y47.779 E.00311 ;WIDTH:0.318646 G1 X-14.334 Y47.899 E.00272 ;WIDTH:0.279142 G1 X-14.314 Y48.018 E.00233 ;WIDTH:0.257538 G1 X-14.312 Y48.032 E.00025 ;WIDTH:0.232125 G1 X-14.288 Y48.272 E.00371 ;WIDTH:0.184997 G1 X-14.265 Y48.511 E.00278 ;WIDTH:0.144792 G3 X-14.249 Y48.997 I-7.384 J.489 E.00404 G1 X-14.264 Y49.481 E.00402 ;WIDTH:0.178483 G1 X-14.29 Y49.744 E.00292 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.264 Y49.481 ;WIPE_END G1 X-21.791 Y49.021 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.410988 G1 F15000 G1 X-22.38 Y49.56 E.02396 G1 X-21.73 Y49.56 E.01951 G1 X-21.787 Y49.06 E.01509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.217 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42029 G1 F15000 G1 X-21.27 Y47.974 E.08471 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-22.684 Y49.388 ;WIPE_END G1 X-16.48 Y45.852 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-14.198 Y43.571 E.09923 G1 X-14.198 Y43.464 E.00327 G1 X-14.216 Y43.447 E.00076 G1 X-14.216 Y43.054 E.01206 G1 X-16.729 Y45.567 E.10929 G2 X-17.141 Y45.446 I-.666 J1.507 E.01326 G1 X-14.216 Y42.521 E.12724 G1 X-14.216 Y41.987 E.01641 G1 X-17.601 Y45.372 E.14721 G2 X-18.123 Y45.361 I-.305 J1.978 E.01611 G1 X-14.216 Y41.453 E.16992 G1 X-14.216 Y40.92 E.01641 G1 X-18.976 Y45.68 E.20704 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.751 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-21.216 Y47.387 E.11024 G3 X-19.563 Y45.734 I3.147 J1.494 E.0733 G1 X-14.216 Y40.386 E.23256 G1 X-14.216 Y39.852 E.01641 G1 X-24.115 Y49.752 E.43051 G1 X-24.649 Y49.752 E.01641 G1 X-14.216 Y39.319 E.45372 G1 X-14.216 Y38.785 E.01641 G1 X-25.183 Y49.752 E.47693 G1 X-25.716 Y49.752 E.01641 G1 X-14.216 Y38.251 E.50014 G1 X-14.216 Y37.718 E.01641 G1 X-26.25 Y49.752 E.52335 G1 X-26.784 Y49.752 E.01641 G1 X-14.216 Y37.184 E.54656 G1 X-14.216 Y36.65 E.01641 G1 X-27.317 Y49.752 E.56977 G1 X-27.851 Y49.752 E.01641 G1 X-14.216 Y36.117 E.59298 G1 X-14.216 Y35.583 E.01641 G1 X-28.385 Y49.752 E.61619 G1 X-28.918 Y49.752 E.01641 G1 X-14.216 Y35.049 E.6394 G1 X-14.216 Y34.516 E.01641 G1 X-29.452 Y49.752 E.6626 G1 X-29.986 Y49.752 E.01641 G1 X-14.216 Y33.982 E.68581 G1 X-14.216 Y33.448 E.01641 G1 X-30.519 Y49.752 E.70902 G1 X-31.053 Y49.752 E.01641 G1 X-14.216 Y32.914 E.73223 G1 X-14.216 Y32.381 E.01641 G1 X-31.587 Y49.752 E.75544 G1 X-32.12 Y49.752 E.01641 G1 X-14.216 Y31.847 E.77865 G1 X-14.216 Y31.313 E.01641 G1 X-32.654 Y49.752 E.80186 G1 X-33.188 Y49.752 E.01641 G1 X-14.216 Y30.78 E.82507 G1 X-14.216 Y30.246 E.01641 G1 X-33.721 Y49.752 E.84828 G1 X-34.255 Y49.752 E.01641 G1 X-14.216 Y29.712 E.87148 G1 X-14.216 Y29.179 E.01641 G1 X-34.789 Y49.752 E.89469 G1 X-35.322 Y49.752 E.01641 G1 X-14.216 Y28.645 E.9179 G1 X-14.216 Y28.111 E.01641 G1 X-30.255 Y44.15 E.69751 G3 X-31.62 Y45.515 I-2.164 J-.799 E.06125 G1 X-35.856 Y49.752 E.18424 G1 X-36.39 Y49.752 E.01641 G1 X-32.299 Y45.661 E.17791 G3 X-32.811 Y45.64 I-.151 J-2.572 E.0158 G1 X-36.924 Y49.752 E.17883 G1 X-37.457 Y49.752 E.01641 G1 X-33.236 Y45.53 E.18358 G3 X-33.605 Y45.366 I.44 J-1.484 E.01246 G1 X-37.991 Y49.752 E.19074 G1 X-38.525 Y49.752 E.01641 G1 X-33.922 Y45.149 E.20016 G3 X-34.195 Y44.888 I.855 J-1.167 E.01164 G1 X-39.058 Y49.752 E.21151 G1 X-39.592 Y49.752 E.01641 G1 X-34.426 Y44.586 E.22468 G3 X-34.612 Y44.239 I1.224 J-.883 E.01215 G1 X-40.126 Y49.752 E.23976 G1 X-40.659 Y49.752 E.01641 G1 X-34.74 Y43.832 E.25743 G3 X-34.798 Y43.357 I1.775 J-.46 E.01476 G1 X-41.363 Y49.922 E.28547 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-39.948 Y48.507 ;WIPE_END G1 X-35.027 Y42.674 Z2.4 F30000 G1 X-14.035 Y17.791 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-15.996 Y19.752 E.08529 G1 X-16.53 Y19.752 E.01641 G1 X-14.216 Y17.438 E.10064 G1 X-14.216 Y16.904 E.01641 G1 X-17.063 Y19.752 E.12385 G1 X-17.597 Y19.752 E.01641 G1 X-14.216 Y16.37 E.14706 G1 X-14.216 Y15.837 E.01641 G1 X-18.131 Y19.752 E.17027 G1 X-18.665 Y19.752 E.01641 G1 X-14.216 Y15.303 E.19348 G1 X-14.216 Y14.769 E.01641 G1 X-19.368 Y19.922 E.22406 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-17.954 Y18.507 ;WIPE_END G1 X-14.885 Y25.496 Z2.4 F30000 G1 X-14.046 Y27.408 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-30.109 Y43.471 E.69856 G2 X-30.13 Y42.959 I-2.572 J-.151 E.0158 G1 X-14.216 Y27.044 E.6921 G1 X-14.216 Y26.51 E.01641 G1 X-30.24 Y42.534 E.69685 G2 X-30.404 Y42.165 I-1.484 J.44 E.01246 G1 X-14.216 Y25.977 E.70401 G1 X-14.216 Y25.923 E.00166 G1 X-14.618 Y25.882 E.01244 G1 X-14.637 Y25.864 E.00081 G1 X-30.621 Y41.848 E.69513 G2 X-30.882 Y41.575 I-1.166 J.855 E.01164 G1 X-15.572 Y26.266 E.66579 G1 X-16.106 Y26.266 E.01641 G1 X-31.184 Y41.344 E.65575 G2 X-31.531 Y41.158 I-.883 J1.223 E.01215 G1 X-16.639 Y26.266 E.64763 G1 X-17.173 Y26.266 E.01641 G1 X-31.938 Y41.03 E.64209 G2 X-32.413 Y40.972 I-.46 J1.774 E.01476 G1 X-17.707 Y26.266 E.63954 G1 X-18.24 Y26.266 E.01641 G1 X-33.017 Y41.042 E.6426 G2 X-34.729 Y42.754 I.552 J2.264 E.07831 G1 X-41.727 Y49.752 E.30431 G1 X-42.26 Y49.752 E.01641 G1 X-18.774 Y26.266 E1.02138 G1 X-19.308 Y26.266 E.01641 G1 X-42.794 Y49.752 E1.02138 G1 X-43.328 Y49.752 E.01641 G1 X-19.824 Y26.248 E1.02214 G1 X-20.198 Y26.248 E.01151 G1 X-20.198 Y26.089 E.00491 G1 X-43.861 Y49.752 E1.02908 G1 X-44.395 Y49.752 E.01641 G1 X-20.198 Y25.555 E1.05229 G1 X-20.198 Y25.021 E.01641 G1 X-44.929 Y49.752 E1.07549 G1 X-45.462 Y49.752 E.01641 G1 X-20.198 Y24.488 E1.0987 G1 X-20.198 Y23.954 E.01641 G1 X-45.996 Y49.752 E1.12191 G1 X-46.53 Y49.752 E.01641 G1 X-20.198 Y23.42 E1.14512 G1 X-20.198 Y22.887 E.01641 G1 X-47.063 Y49.752 E1.16833 G1 X-47.597 Y49.752 E.01641 G1 X-20.198 Y22.353 E1.19154 G1 X-20.198 Y21.819 E.01641 G1 X-48.131 Y49.752 E1.21475 G1 X-48.665 Y49.752 E.01641 G1 X-20.198 Y21.285 E1.23796 G1 X-20.198 Y20.752 E.01641 G1 X-31.202 Y31.756 E.47853 G1 X-31.202 Y32.248 E.01515 G1 X-31.694 Y32.248 E.01515 G1 X-49.198 Y49.752 E.76121 G1 X-49.732 Y49.752 E.01641 G1 X-32.228 Y32.248 E.76121 G1 X-32.762 Y32.248 E.01641 G1 X-50.266 Y49.752 E.76121 G1 X-50.799 Y49.752 E.01641 G1 X-33.295 Y32.248 E.76121 G1 X-33.829 Y32.248 E.01641 G1 X-51.333 Y49.752 E.76121 G1 X-51.867 Y49.752 E.01641 G1 X-34.363 Y32.248 E.76121 G1 X-34.897 Y32.248 E.01641 G1 X-52.4 Y49.752 E.76121 G1 X-52.934 Y49.752 E.01641 G1 X-35.43 Y32.248 E.76121 G1 X-35.964 Y32.248 E.01641 G1 X-53.468 Y49.752 E.76121 G1 X-54.001 Y49.752 E.01641 G1 X-36.498 Y32.248 E.76121 G1 X-37.031 Y32.248 E.01641 G1 X-54.535 Y49.752 E.76121 G1 X-55.069 Y49.752 E.01641 G1 X-37.565 Y32.248 E.76121 G1 X-38.099 Y32.248 E.01641 G1 X-55.602 Y49.752 E.76121 G1 X-56.136 Y49.752 E.01641 G1 X-38.632 Y32.248 E.76121 G1 X-39.166 Y32.248 E.01641 G1 X-56.67 Y49.752 E.76121 G1 X-57.203 Y49.752 E.01641 G1 X-39.7 Y32.248 E.76121 G1 X-40.233 Y32.248 E.01641 G1 X-57.737 Y49.752 E.76121 G1 X-58.271 Y49.752 E.01641 G1 X-40.767 Y32.248 E.76121 G1 X-41.301 Y32.248 E.01641 G1 X-58.804 Y49.752 E.76121 G1 X-59.338 Y49.752 E.01641 G1 X-41.834 Y32.248 E.76121 G1 X-42.368 Y32.248 E.01641 G1 X-59.872 Y49.752 E.76121 G1 X-60.406 Y49.752 E.01641 G1 X-42.902 Y32.248 E.76121 G1 X-43.435 Y32.248 E.01641 G1 X-60.939 Y49.752 E.76121 G1 X-61.473 Y49.752 E.01641 G1 X-43.969 Y32.248 E.76121 G1 X-44.503 Y32.248 E.01641 G1 X-62.007 Y49.752 E.76121 G1 X-62.54 Y49.752 E.01641 G1 X-45.036 Y32.248 E.76121 G1 X-45.57 Y32.248 E.01641 G1 X-63.074 Y49.752 E.76121 G1 X-63.608 Y49.752 E.01641 G1 X-46.104 Y32.248 E.76121 G1 X-46.638 Y32.248 E.01641 G1 X-64.141 Y49.752 E.76121 G1 X-64.675 Y49.752 E.01641 G1 X-47.171 Y32.248 E.76121 G1 X-47.705 Y32.248 E.01641 G1 X-65.209 Y49.752 E.76121 G1 X-65.742 Y49.752 E.01641 G1 X-48.239 Y32.248 E.76121 G1 X-48.772 Y32.248 E.01641 G1 X-66.276 Y49.752 E.76121 G1 X-66.81 Y49.752 E.01641 G1 X-49.306 Y32.248 E.76121 G1 X-49.84 Y32.248 E.01641 G1 X-67.343 Y49.752 E.76121 G1 X-67.877 Y49.752 E.01641 G1 X-50.373 Y32.248 E.76121 G1 X-50.907 Y32.248 E.01641 G1 X-68.411 Y49.752 E.76121 G1 X-68.944 Y49.752 E.01641 G1 X-51.441 Y32.248 E.76121 G1 X-51.974 Y32.248 E.01641 G1 X-69.478 Y49.752 E.76121 G1 X-70.012 Y49.752 E.01641 G1 X-52.508 Y32.248 E.76121 G1 X-53.042 Y32.248 E.01641 G1 X-70.545 Y49.752 E.76121 G1 X-71.079 Y49.752 E.01641 G1 X-53.575 Y32.248 E.76121 G1 X-54.109 Y32.248 E.01641 G1 X-71.613 Y49.752 E.76121 G1 X-72.147 Y49.752 E.01641 G1 X-54.643 Y32.248 E.76121 G1 X-55.176 Y32.248 E.01641 G1 X-72.68 Y49.752 E.76121 G1 X-73.214 Y49.752 E.01641 G1 X-55.71 Y32.248 E.76121 G1 X-56.244 Y32.248 E.01641 G1 X-73.748 Y49.752 E.76121 G1 X-74.281 Y49.752 E.01641 G1 X-56.777 Y32.248 E.76121 G1 X-57.311 Y32.248 E.01641 G1 X-74.815 Y49.752 E.76121 G1 X-75.349 Y49.752 E.01641 G1 X-57.845 Y32.248 E.76121 G1 X-58.379 Y32.248 E.01641 G1 X-70.241 Y44.111 E.51589 G3 X-71.659 Y45.529 I-2.171 J-.753 E.06381 G1 X-75.882 Y49.752 E.18366 G1 X-76.416 Y49.752 E.01641 G1 X-72.327 Y45.663 E.17783 G3 X-72.833 Y45.635 I-.121 J-2.481 E.01562 G1 X-76.95 Y49.752 E.17902 G1 X-77.483 Y49.752 E.01641 G1 X-73.255 Y45.524 E.18387 G3 X-73.622 Y45.357 I.449 J-1.477 E.01243 G1 X-78.017 Y49.752 E.19111 G1 X-78.551 Y49.752 E.01641 G1 X-73.936 Y45.137 E.20069 G3 X-74.207 Y44.874 I.862 J-1.161 E.01164 G1 X-79.084 Y49.752 E.21212 G1 X-79.618 Y49.752 E.01641 G1 X-74.436 Y44.57 E.22536 G3 X-74.621 Y44.221 I1.231 J-.877 E.01217 G1 X-80.152 Y49.752 E.24052 G1 X-80.685 Y49.752 E.01641 G1 X-74.744 Y43.811 E.25838 G3 X-74.8 Y43.333 I1.788 J-.451 E.01484 G1 X-81.389 Y49.922 E.28654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.293 Y43.629 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-58.912 Y32.248 E.49492 G1 X-59.446 Y32.248 E.01641 G1 X-70.135 Y42.937 E.46483 G2 X-70.246 Y42.515 I-1.659 J.213 E.01346 G1 X-59.98 Y32.248 E.44648 G1 X-60.513 Y32.248 E.01641 G1 X-70.413 Y42.148 E.43051 G2 X-70.633 Y41.834 I-3.606 J2.301 E.01178 G1 X-61.047 Y32.248 E.41688 G1 X-61.581 Y32.248 E.01641 G1 X-70.896 Y41.563 E.40509 G2 X-71.2 Y41.334 I-1.023 J1.042 E.01175 G1 X-62.114 Y32.248 E.39513 G1 X-62.648 Y32.248 E.01641 G1 X-71.55 Y41.148 E.3871 G2 X-71.959 Y41.026 I-.669 J1.493 E.01317 G1 X-63.182 Y32.248 E.38173 G1 X-63.715 Y32.248 E.01641 G1 X-72.617 Y41.15 E.38714 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.079 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-73.055 Y41.048 E.39021 G2 X-74.723 Y42.722 I.631 J2.297 E.07601 G1 X-81.753 Y49.752 E.30573 G1 X-82.286 Y49.752 E.01641 G1 X-64.783 Y32.248 E.76121 G1 X-65.316 Y32.248 E.01641 G1 X-82.82 Y49.752 E.76121 G1 X-83.354 Y49.752 E.01641 G1 X-65.85 Y32.248 E.76121 G1 X-66.384 Y32.248 E.01641 G1 X-83.311 Y49.175 E.73612 G2 X-83.322 Y48.653 I-1.989 J-.218 E.01611 G1 X-66.917 Y32.248 E.7134 G1 X-67.451 Y32.248 E.01641 G1 X-83.396 Y48.193 E.69342 G2 X-83.517 Y47.78 I-1.628 J.252 E.01327 G1 X-67.985 Y32.248 E.67546 G1 X-68.518 Y32.248 E.01641 G1 X-83.675 Y47.405 E.65913 G2 X-83.865 Y47.06 I-1.402 J.548 E.01211 G1 X-69.052 Y32.248 E.64417 G1 X-69.586 Y32.248 E.01641 G1 X-84.082 Y46.745 E.63043 G1 X-84.332 Y46.46 E.01163 G1 X-70.12 Y32.248 E.61807 G1 X-70.653 Y32.248 E.01641 G1 X-84.611 Y46.206 E.607 G2 X-84.916 Y45.978 I-1.02 J1.046 E.01176 G1 X-71.187 Y32.248 E.59707 G1 X-71.721 Y32.248 E.01641 G1 X-85.249 Y45.777 E.58834 G2 X-85.613 Y45.607 I-.828 J1.296 E.01238 G1 X-72.254 Y32.248 E.58094 G1 X-72.788 Y32.248 E.01641 G1 X-86.012 Y45.472 E.57509 G1 X-86.457 Y45.384 E.01396 G1 X-73.322 Y32.248 E.57124 G1 X-73.698 Y32.248 E.01158 G1 X-73.698 Y32.091 E.00483 G1 X-86.957 Y45.35 E.5766 G1 X-87.427 Y45.38 E.01447 G1 X-87.545 Y45.404 E.00371 G1 X-73.698 Y31.557 E.60217 G1 X-73.698 Y31.024 E.01641 G1 X-88.278 Y45.604 E.63407 G1 X-88.347 Y45.627 E.00223 G2 X-90.099 Y47.156 I1.492 J3.478 E.07268 G1 X-90.314 Y47.106 E.00679 G1 X-73.698 Y30.49 E.7226 G1 X-73.698 Y29.956 E.01641 G1 X-90.702 Y46.96 E.73946 G1 X-90.702 Y46.426 E.01641 G1 X-73.698 Y29.423 E.73946 G1 X-73.698 Y28.889 E.01641 G1 X-90.702 Y45.893 E.73946 G1 X-90.702 Y45.359 E.01641 G1 X-73.698 Y28.355 E.73946 G1 X-73.698 Y27.821 E.01641 G1 X-90.702 Y44.825 E.73946 G1 X-90.702 Y44.292 E.01641 G1 X-73.698 Y27.288 E.73946 G1 X-73.698 Y26.754 E.01641 G1 X-90.702 Y43.758 E.73946 G1 X-90.702 Y43.224 E.01641 G1 X-73.698 Y26.22 E.73946 G1 X-73.698 Y25.687 E.01641 G1 X-90.702 Y42.69 E.73946 G1 X-90.702 Y42.157 E.01641 G1 X-73.698 Y25.153 E.73946 G1 X-73.698 Y24.619 E.01641 G1 X-90.702 Y41.623 E.73946 G1 X-90.702 Y41.089 E.01641 G1 X-73.698 Y24.086 E.73946 G1 X-73.698 Y23.552 E.01641 G1 X-90.702 Y40.556 E.73946 G1 X-90.702 Y40.022 E.01641 G1 X-73.698 Y23.018 E.73946 G1 X-73.698 Y22.485 E.01641 G1 X-90.702 Y39.488 E.73946 G1 X-90.702 Y38.955 E.01641 G1 X-73.698 Y21.951 E.73946 G1 X-73.698 Y21.417 E.01641 G1 X-90.702 Y38.421 E.73946 G1 X-90.702 Y37.887 E.01641 G1 X-73.698 Y20.884 E.73946 G1 X-73.698 Y20.35 E.01641 G1 X-90.702 Y37.354 E.73946 G1 X-90.702 Y36.82 E.01641 G1 X-73.698 Y19.816 E.73946 G1 X-73.698 Y19.283 E.01641 G1 X-90.702 Y36.286 E.73946 G1 X-90.702 Y35.753 E.01641 G1 X-73.698 Y18.749 E.73946 G1 X-73.698 Y18.215 E.01641 G1 X-90.702 Y35.219 E.73946 G1 X-90.702 Y34.685 E.01641 G1 X-73.698 Y17.682 E.73946 G1 X-73.698 Y17.148 E.01641 G1 X-90.702 Y34.152 E.73946 G1 X-90.702 Y33.618 E.01641 G1 X-73.698 Y16.614 E.73946 G1 X-73.698 Y16.08 E.01641 G1 X-90.702 Y33.084 E.73946 G1 X-90.702 Y32.551 E.01641 G1 X-73.698 Y15.547 E.73946 G1 X-73.698 Y15.013 E.01641 G1 X-90.702 Y32.017 E.73946 G1 X-90.702 Y31.483 E.01641 G1 X-85.467 Y26.248 E.22766 G1 X-86 Y26.248 E.01641 G1 X-90.702 Y30.95 E.20446 G1 X-90.702 Y30.416 E.01641 G1 X-86.534 Y26.248 E.18125 G1 X-87.068 Y26.248 E.01641 G1 X-90.702 Y29.882 E.15804 G1 X-90.702 Y29.348 E.01641 G1 X-87.432 Y26.078 E.14221 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y25.653 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-73.698 Y14.479 E.48591 G1 X-73.698 Y13.946 E.01641 G1 X-84.702 Y24.95 E.47854 G1 X-84.702 Y24.416 E.01641 G1 X-73.698 Y13.412 E.47854 G1 X-73.698 Y12.878 E.01641 G1 X-84.702 Y23.882 E.47854 G1 X-84.702 Y23.348 E.01641 G1 X-73.698 Y12.345 E.47854 G1 X-73.698 Y11.811 E.01641 G1 X-84.702 Y22.815 E.47854 G1 X-84.702 Y22.281 E.01641 G1 X-73.698 Y11.277 E.47854 G1 X-73.698 Y10.744 E.01641 G1 X-84.702 Y21.747 E.47854 G1 X-84.702 Y21.214 E.01641 G1 X-73.698 Y10.21 E.47854 G1 X-73.698 Y9.676 E.01641 G1 X-84.702 Y20.68 E.47854 G1 X-84.702 Y20.146 E.01641 G1 X-73.698 Y9.143 E.47854 G1 X-73.698 Y8.609 E.01641 G1 X-85.011 Y19.922 E.49197 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-83.597 Y18.507 ;WIPE_END G1 X-76.186 Y20.336 Z2.4 F30000 G1 X-31.372 Y31.392 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.198 Y20.218 E.48591 G1 X-20.198 Y19.752 E.01434 G1 X-19.732 Y19.752 E.01434 G1 X-14.216 Y14.236 E.23989 G1 X-14.216 Y13.702 E.01641 G1 X-31.202 Y30.688 E.7387 G1 X-31.202 Y30.155 E.01641 G1 X-14.216 Y13.168 E.7387 G1 X-14.216 Y12.635 E.01641 G1 X-31.202 Y29.621 E.7387 G1 X-31.202 Y29.087 E.01641 G1 X-14.216 Y12.101 E.7387 G1 X-14.216 Y11.567 E.01641 G1 X-31.202 Y28.553 E.7387 G1 X-31.202 Y28.02 E.01641 G1 X-14.216 Y11.034 E.7387 G1 X-14.216 Y10.5 E.01641 G1 X-31.202 Y27.486 E.7387 G1 X-31.202 Y26.952 E.01641 G1 X-14.216 Y9.966 E.7387 G1 X-14.216 Y9.432 E.01641 G1 X-31.202 Y26.419 E.7387 G1 X-31.202 Y25.885 E.01641 G1 X-14.216 Y8.899 E.7387 G1 X-14.216 Y8.365 E.01641 G1 X-31.202 Y25.351 E.7387 G1 X-31.202 Y24.818 E.01641 G1 X-14.216 Y7.831 E.7387 G1 X-14.216 Y7.298 E.01641 G1 X-31.202 Y24.284 E.7387 G1 X-31.202 Y23.75 E.01641 G1 X-14.216 Y6.764 E.7387 G1 X-14.216 Y6.23 E.01641 G1 X-31.202 Y23.217 E.7387 G1 X-31.202 Y22.683 E.01641 G1 X-14.216 Y5.697 E.7387 G1 X-14.216 Y5.163 E.01641 G1 X-31.202 Y22.149 E.7387 G1 X-31.202 Y21.616 E.01641 G1 X-14.216 Y4.629 E.7387 G1 X-14.216 Y4.096 E.01641 G1 X-31.202 Y21.082 E.7387 G1 X-31.202 Y20.548 E.01641 G1 X-14.216 Y3.562 E.7387 G1 X-14.216 Y3.028 E.01641 G1 X-31.202 Y20.015 E.7387 G1 X-31.202 Y19.481 E.01641 G1 X-14.216 Y2.495 E.7387 G1 X-14.216 Y1.961 E.01641 G1 X-31.202 Y18.947 E.7387 G1 X-31.202 Y18.414 E.01641 M73 P25 R82 G1 X-14.216 Y1.427 E.7387 G1 X-14.216 Y.894 E.01641 G1 X-31.202 Y17.88 E.7387 G1 X-31.202 Y17.346 E.01641 G1 X-14.216 Y.36 E.7387 G1 X-14.216 Y-.174 E.01641 G1 X-31.202 Y16.812 E.7387 G1 X-31.202 Y16.279 E.01641 G1 X-14.216 Y-.707 E.7387 G1 X-14.216 Y-1.241 E.01641 G1 X-31.202 Y15.745 E.7387 G1 X-31.202 Y15.211 E.01641 G1 X-14.216 Y-1.775 E.7387 G1 X-14.216 Y-1.83 E.0017 G1 X-14.559 Y-1.928 E.01097 G1 X-14.577 Y-1.947 E.00082 G1 X-31.202 Y14.678 E.72297 G1 X-31.202 Y14.144 E.01641 G1 X-15.523 Y-1.534 E.68183 G1 X-16.057 Y-1.534 E.01641 G1 X-31.202 Y13.61 E.65862 G1 X-31.202 Y13.077 E.01641 G1 X-16.591 Y-1.534 E.63541 G1 X-17.124 Y-1.534 E.01641 G1 X-31.202 Y12.543 E.6122 G1 X-31.202 Y12.009 E.01641 G1 X-17.658 Y-1.534 E.58899 G1 X-18.192 Y-1.534 E.01641 G1 X-31.202 Y11.476 E.56578 G1 X-31.202 Y10.942 E.01641 G1 X-18.726 Y-1.534 E.54257 G1 X-19.259 Y-1.534 E.01641 G1 X-31.202 Y10.408 E.51937 G1 X-31.202 Y9.875 E.01641 G1 X-19.775 Y-1.552 E.49692 G1 X-20.198 Y-1.552 E.013 G1 X-20.198 Y-1.663 E.00341 G1 X-31.202 Y9.341 E.47853 G1 X-31.202 Y8.807 E.01641 G1 X-20.198 Y-2.197 E.47853 G1 X-20.198 Y-2.73 E.01641 G1 X-31.202 Y8.274 E.47854 G1 X-31.202 Y7.752 E.01604 G1 X-31.214 Y7.752 E.00037 G1 X-20.198 Y-3.264 E.47906 G1 X-20.198 Y-3.798 E.01641 G1 X-31.748 Y7.752 E.50227 G1 X-32.281 Y7.752 E.01641 G1 X-20.198 Y-4.331 E.52548 G1 X-20.198 Y-4.865 E.01641 G1 X-32.815 Y7.752 E.54868 G1 X-33.349 Y7.752 E.01641 G1 X-20.198 Y-5.399 E.57189 G1 X-20.198 Y-5.932 E.01641 G1 X-33.882 Y7.752 E.5951 G1 X-34.416 Y7.752 E.01641 G1 X-20.028 Y-6.636 E.62569 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.386 Y-7.278 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-18.862 Y-7.802 E.02275 G1 X-19.076 Y-8.122 E.01183 G1 X-19.75 Y-7.448 E.02929 G1 X-20.198 Y-7.448 E.01379 G1 X-20.198 Y-7 E.01379 G1 X-34.95 Y7.752 E.64152 G1 X-35.483 Y7.752 E.01641 G1 X-19.259 Y-8.473 E.70558 G3 X-19.409 Y-8.856 I1.381 J-.762 E.0127 G1 X-36.017 Y7.752 E.72226 G1 X-36.551 Y7.752 E.01641 G1 X-19.521 Y-9.278 E.7406 G3 X-19.584 Y-9.748 I1.753 J-.476 E.01463 G1 X-37.084 Y7.752 E.76105 G1 X-37.618 Y7.752 E.01641 G1 X-19.582 Y-10.284 E.78435 G3 X-19.482 Y-10.918 I2.458 J.064 E.0198 G1 X-38.152 Y7.752 E.81193 G1 X-38.685 Y7.752 E.01641 G1 X-19.182 Y-11.752 E.84819 G1 X-19.715 Y-11.752 E.01641 G1 X-39.219 Y7.752 E.84819 G1 X-39.753 Y7.752 E.01641 G1 X-20.249 Y-11.752 E.84819 G1 X-20.698 Y-11.752 E.01381 G1 X-20.698 Y-11.836 E.0026 G1 X-40.286 Y7.752 E.85186 G1 X-40.82 Y7.752 E.01641 G1 X-20.698 Y-12.37 E.87507 G1 X-20.698 Y-12.904 E.01641 G1 X-41.354 Y7.752 E.89828 G1 X-41.888 Y7.752 E.01641 G1 X-20.698 Y-13.438 E.92149 G1 X-20.698 Y-13.971 E.01641 G1 X-42.421 Y7.752 E.9447 G1 X-42.955 Y7.752 E.01641 G1 X-20.698 Y-14.505 E.96791 G1 X-20.698 Y-15.039 E.01641 G1 X-43.489 Y7.752 E.99112 G1 X-44.022 Y7.752 E.01641 G1 X-20.698 Y-15.572 E1.01433 G1 X-20.698 Y-16.106 E.01641 G1 X-44.556 Y7.752 E1.03754 G1 X-45.09 Y7.752 E.01641 G1 X-20.698 Y-16.64 E1.06075 G1 X-20.698 Y-17.173 E.01641 G1 X-45.623 Y7.752 E1.08395 G1 X-46.157 Y7.752 E.01641 G1 X-20.698 Y-17.707 E1.10716 G1 X-20.698 Y-18.241 E.01641 G1 X-46.691 Y7.752 E1.13037 G1 X-47.224 Y7.752 E.01641 G1 X-20.698 Y-18.774 E1.15358 G1 X-20.698 Y-19.308 E.01641 G1 X-47.758 Y7.752 E1.17679 G1 X-48.292 Y7.752 E.01641 G1 X-20.698 Y-19.842 E1.2 G1 X-20.698 Y-20.375 E.01641 G1 X-48.825 Y7.752 E1.22321 G1 X-49.359 Y7.752 E.01641 G1 X-20.698 Y-20.909 E1.24642 G1 X-20.698 Y-21.443 E.01641 G1 X-49.893 Y7.752 E1.26963 G1 X-50.426 Y7.752 E.01641 G1 X-20.698 Y-21.976 E1.29283 G1 X-20.698 Y-22.51 E.01641 G1 X-50.96 Y7.752 E1.31604 G1 X-51.494 Y7.752 E.01641 G1 X-20.698 Y-23.044 E1.33925 G1 X-20.698 Y-23.577 E.01641 G1 X-52.027 Y7.752 E1.36246 G1 X-52.561 Y7.752 E.01641 G1 X-20.698 Y-24.111 E1.38567 G1 X-20.698 Y-24.645 E.01641 G1 X-53.095 Y7.752 E1.40888 G1 X-53.629 Y7.752 E.01641 G1 X-21.125 Y-24.752 E1.41353 G1 X-21.658 Y-24.752 E.01641 G1 X-40.14 Y-6.271 E.80372 G2 X-40.109 Y-6.835 I-2.35 J-.409 E.01741 G1 X-22.192 Y-24.752 E.77919 G1 X-22.726 Y-24.752 E.01641 G1 X-40.182 Y-7.296 E.75913 G2 X-40.333 Y-7.678 I-2.049 J.592 E.01266 G1 X-23.259 Y-24.752 E.74252 G1 X-23.793 Y-24.752 E.01641 G1 X-40.524 Y-8.021 E.72762 G2 X-40.764 Y-8.315 I-1.238 J.762 E.0117 G1 X-24.327 Y-24.752 E.71481 G1 X-24.861 Y-24.752 E.01641 G1 X-41.048 Y-8.564 E.70397 G2 X-41.379 Y-8.767 I-.936 J1.155 E.01197 G1 X-25.394 Y-24.752 E.69514 G1 X-25.928 Y-24.752 E.01641 G1 X-41.758 Y-8.922 E.68841 G2 X-42.199 Y-9.014 I-.776 J2.614 E.01389 G1 X-26.462 Y-24.752 E.6844 G1 X-26.995 Y-24.752 E.01641 G1 X-42.95 Y-8.797 E.69385 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.536 Y-10.211 ;WIPE_END G1 X-41.812 Y-4.599 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-54.162 Y7.752 E.5371 G1 X-54.696 Y7.752 E.01641 G1 X-42.605 Y-4.339 E.52583 G3 X-43.066 Y-4.412 I.288 J-3.345 E.01437 G1 X-55.23 Y7.752 E.52897 G1 X-55.763 Y7.752 E.01641 G1 X-43.452 Y-4.559 E.53537 G3 X-43.791 Y-4.755 I.574 J-1.382 E.01205 G1 X-56.297 Y7.752 E.54388 G1 X-56.831 Y7.752 E.01641 G1 X-44.079 Y-5 E.55456 G3 X-44.334 Y-5.278 I1.424 J-1.566 E.01163 G1 X-57.364 Y7.752 E.56665 G1 X-57.898 Y7.752 E.01641 G1 X-44.537 Y-5.609 E.58104 G3 X-44.692 Y-5.988 I1.361 J-.778 E.01262 G1 X-58.432 Y7.752 E.59751 G1 X-58.965 Y7.752 E.01641 G1 X-44.784 Y-6.429 E.61671 G3 X-44.782 Y-6.965 I2.037 J-.259 E.01653 G1 X-59.499 Y7.752 E.64001 G1 X-60.033 Y7.752 E.01641 G1 X-27.529 Y-24.752 E1.41353 G1 X-28.063 Y-24.752 E.01641 G1 X-60.566 Y7.752 E1.41353 G1 X-61.1 Y7.752 E.01641 G1 X-28.596 Y-24.752 E1.41353 G1 X-29.13 Y-24.752 E.01641 G1 X-61.634 Y7.752 E1.41353 G1 X-62.167 Y7.752 E.01641 G1 X-29.664 Y-24.752 E1.41353 G1 X-30.197 Y-24.752 E.01641 G1 X-62.701 Y7.752 E1.41353 G1 X-63.235 Y7.752 E.01641 G1 X-30.731 Y-24.752 E1.41353 G1 X-31.265 Y-24.752 E.01641 G1 X-63.768 Y7.752 E1.41353 G1 X-64.302 Y7.752 E.01641 G1 X-31.798 Y-24.752 E1.41353 G1 X-32.332 Y-24.752 E.01641 G1 X-64.836 Y7.752 E1.41353 G1 X-65.37 Y7.752 E.01641 G1 X-32.866 Y-24.752 E1.41353 G1 X-33.399 Y-24.752 E.01641 G1 X-65.903 Y7.752 E1.41353 G1 X-66.437 Y7.752 E.01641 G1 X-33.933 Y-24.752 E1.41353 G1 X-34.467 Y-24.752 E.01641 G1 X-66.971 Y7.752 E1.41353 G1 X-67.504 Y7.752 E.01641 G1 X-35 Y-24.752 E1.41353 G1 X-35.534 Y-24.752 E.01641 G1 X-68.038 Y7.752 E1.41353 G1 X-68.572 Y7.752 E.01641 G1 X-36.068 Y-24.752 E1.41353 G1 X-36.602 Y-24.752 E.01641 G1 X-69.105 Y7.752 E1.41353 G1 X-69.639 Y7.752 E.01641 G1 X-37.135 Y-24.752 E1.41353 G1 X-37.669 Y-24.752 E.01641 G1 X-70.173 Y7.752 E1.41353 M73 P25 R81 G1 X-70.706 Y7.752 E.01641 G1 X-38.203 Y-24.752 E1.41353 G1 X-38.736 Y-24.752 E.01641 G1 X-71.24 Y7.752 E1.41353 G1 X-71.774 Y7.752 E.01641 G1 X-39.27 Y-24.752 E1.41353 G1 X-39.804 Y-24.752 E.01641 G1 X-72.307 Y7.752 E1.41353 G1 X-72.841 Y7.752 E.01641 G1 X-40.337 Y-24.752 E1.41353 G1 X-40.871 Y-24.752 E.01641 G1 X-85.375 Y19.752 E1.93539 G1 X-85.908 Y19.752 E.01641 G1 X-61.699 Y-4.458 E1.05284 G2 X-60.228 Y-5.929 I-.715 J-2.186 E.06638 G1 X-41.405 Y-24.752 E.81859 G1 X-41.938 Y-24.752 E.01641 G1 X-60.105 Y-6.585 E.79006 G2 X-60.139 Y-7.085 I-2.467 J-.087 E.01544 G1 X-42.472 Y-24.752 E.7683 G1 X-43.006 Y-24.752 E.01641 G1 X-60.255 Y-7.503 E.75012 G1 X-60.423 Y-7.868 E.01237 G1 X-43.539 Y-24.752 E.73423 G1 X-44.073 Y-24.752 E.01641 G1 X-60.645 Y-8.18 E.72069 G2 X-60.91 Y-8.449 I-1.155 J.869 E.01164 G1 X-44.607 Y-24.752 E.70898 G1 X-45.14 Y-24.752 E.01641 G1 X-61.216 Y-8.677 E.69909 G2 X-61.568 Y-8.858 I-1.81 J3.084 E.01219 G1 X-45.674 Y-24.752 E.6912 G1 X-46.208 Y-24.752 E.01641 G1 X-61.981 Y-8.978 E.68596 G2 X-62.463 Y-9.03 I-.569 J3.047 E.01493 G1 X-46.572 Y-24.922 E.6911 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.173 Y-4.517 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-86.425 Y19.734 E1.05467 G1 X-86.958 Y19.734 E.01641 G1 X-62.855 Y-4.369 E1.04821 G3 X-63.269 Y-4.488 I.151 J-1.301 E.01331 G1 X-87.492 Y19.734 E1.05341 G1 X-88.026 Y19.734 E.01641 G1 X-63.638 Y-4.653 E1.06056 G3 X-63.948 Y-4.877 I.517 J-1.04 E.01181 G1 X-88.559 Y19.734 E1.07031 G1 X-89.093 Y19.734 E.01641 G1 X-64.219 Y-5.14 E1.08173 G3 X-64.447 Y-5.446 I1.049 J-1.017 E.01176 G1 X-89.627 Y19.734 E1.09504 G1 X-89.692 Y19.734 E.00199 G1 X-89.887 Y19.539 E.00851 G1 X-90.531 Y20.182 E.02799 G3 X-90.559 Y20.133 I.055 J-.063 E.00178 G1 X-64.628 Y-5.798 E1.12769 G3 X-64.748 Y-6.211 I1.509 J-.665 E.01327 G1 X-90.684 Y19.725 E1.12791 G1 X-90.684 Y19.191 E.01641 G1 X-64.618 Y-6.875 E1.13358 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.105 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-63.086 Y-8.941 E.69495 G2 X-64.711 Y-7.316 I.626 J2.251 E.07393 G1 X-90.702 Y18.675 E1.13028 G1 X-90.702 Y18.141 E.01641 G1 X-47.809 Y-24.752 E1.86534 G1 X-48.343 Y-24.752 E.01641 G1 X-90.702 Y17.607 E1.84214 G1 X-90.702 Y17.074 E.01641 G1 X-48.876 Y-24.752 E1.81893 G1 X-49.41 Y-24.752 E.01641 G1 X-90.702 Y16.54 E1.79572 G1 X-90.702 Y16.006 E.01641 G1 X-49.944 Y-24.752 E1.77251 G1 X-50.477 Y-24.752 E.01641 G1 X-90.702 Y15.473 E1.7493 G1 X-90.702 Y14.939 E.01641 G1 X-51.011 Y-24.752 E1.72609 G1 X-51.545 Y-24.752 E.01641 G1 X-90.702 Y14.405 E1.70288 G1 X-90.702 Y13.872 E.01641 G1 X-52.078 Y-24.752 E1.67967 G1 X-52.612 Y-24.752 E.01641 G1 X-90.702 Y13.338 E1.65646 G1 X-90.702 Y12.804 E.01641 G1 X-53.146 Y-24.752 E1.63326 G1 X-53.679 Y-24.752 E.01641 G1 X-90.702 Y12.271 E1.61005 G1 X-90.702 Y11.737 E.01641 G1 X-54.213 Y-24.752 E1.58684 G1 X-54.747 Y-24.752 E.01641 G1 X-90.702 Y11.203 E1.56363 G1 X-90.702 Y10.67 E.01641 G1 X-55.28 Y-24.752 E1.54042 G1 X-55.814 Y-24.752 E.01641 G1 X-90.702 Y10.136 E1.51721 G1 X-90.702 Y9.602 E.01641 G1 X-56.348 Y-24.752 E1.494 G1 X-56.881 Y-24.752 E.01641 G1 X-90.702 Y9.069 E1.47079 G1 X-90.702 Y8.535 E.01641 G1 X-57.415 Y-24.752 E1.44758 G1 X-57.949 Y-24.752 E.01641 G1 X-90.702 Y8.001 E1.42438 G1 X-90.702 Y7.468 E.01641 G1 X-58.482 Y-24.752 E1.40117 G1 X-59.016 Y-24.752 E.01641 G1 X-90.702 Y6.934 E1.37796 G1 X-90.702 Y6.4 E.01641 G1 X-59.55 Y-24.752 E1.35475 G1 X-60.084 Y-24.752 E.01641 G1 X-90.702 Y5.866 E1.33154 G1 X-90.702 Y5.333 E.01641 G1 X-60.617 Y-24.752 E1.30833 G1 X-61.151 Y-24.752 E.01641 G1 X-90.702 Y4.799 E1.28512 G1 X-90.702 Y4.265 E.01641 G1 X-61.685 Y-24.752 E1.26191 G1 X-62.218 Y-24.752 E.01641 G1 X-84.702 Y-2.268 E.97777 G1 X-84.702 Y-2.802 E.01641 G1 X-62.752 Y-24.752 E.95457 G1 X-63.286 Y-24.752 E.01641 G1 X-84.702 Y-3.336 E.93136 G1 X-84.702 Y-3.869 E.01641 G1 X-63.819 Y-24.752 E.90815 G1 X-64.353 Y-24.752 E.01641 G1 X-84.702 Y-4.403 E.88494 G1 X-84.702 Y-4.937 E.01641 G1 X-64.887 Y-24.752 E.86173 G1 X-65.42 Y-24.752 E.01641 G1 X-84.702 Y-5.47 E.83852 G1 X-84.702 Y-6.004 E.01641 G1 X-65.954 Y-24.752 E.81531 G1 X-66.488 Y-24.752 E.01641 G1 X-84.702 Y-6.538 E.7921 G1 X-84.702 Y-7.071 E.01641 G1 X-67.021 Y-24.752 E.76889 G1 X-67.555 Y-24.752 E.01641 G1 X-84.841 Y-7.466 E.75175 G1 X-85.375 Y-7.466 E.01641 G1 X-68.089 Y-24.752 E.75175 G1 X-68.622 Y-24.752 E.01641 G1 X-85.9 Y-7.475 E.75136 G1 X-85.979 Y-7.825 E.01105 G1 X-86.005 Y-7.851 E.00111 G1 X-85.899 Y-8.009 E.00586 G1 X-69.156 Y-24.752 E.72812 G1 X-69.69 Y-24.752 E.01641 G1 X-85.443 Y-8.999 E.68506 G1 X-85.33 Y-9.523 E.01649 G1 X-85.322 Y-9.653 E.00401 G1 X-70.223 Y-24.752 E.65661 G1 X-70.757 Y-24.752 E.01641 G1 X-85.312 Y-10.197 E.63297 G2 X-85.37 Y-10.673 I-1.838 J-.02 E.01479 G1 X-71.291 Y-24.752 E.61226 G1 X-71.825 Y-24.752 E.01641 G1 X-84.202 Y-12.375 E.53827 G1 X-84.202 Y-12.908 E.01641 G1 X-72.358 Y-24.752 E.51506 G1 X-72.892 Y-24.752 E.01641 G1 X-84.202 Y-13.442 E.49185 G1 X-84.202 Y-13.976 E.01641 G1 X-73.426 Y-24.752 E.46864 G1 X-73.959 Y-24.752 E.01641 G1 X-84.202 Y-14.509 E.44543 G1 X-84.202 Y-15.043 E.01641 G1 X-74.493 Y-24.752 E.42223 G1 X-75.027 Y-24.752 E.01641 G1 X-84.202 Y-15.577 E.39902 G1 X-84.202 Y-16.11 E.01641 G1 X-75.56 Y-24.752 E.37581 G1 X-76.094 Y-24.752 E.01641 G1 X-84.202 Y-16.644 E.3526 G1 X-84.202 Y-17.178 E.01641 G1 X-76.628 Y-24.752 E.32939 G1 X-77.161 Y-24.752 E.01641 G1 X-84.202 Y-17.711 E.30618 G1 X-84.202 Y-18.245 E.01641 G1 X-77.695 Y-24.752 E.28297 G1 X-78.229 Y-24.752 E.01641 G1 X-84.202 Y-18.779 E.25976 G1 X-84.202 Y-19.312 E.01641 G1 X-78.762 Y-24.752 E.23655 G1 X-79.296 Y-24.752 E.01641 G1 X-84.202 Y-19.846 E.21335 G1 X-84.202 Y-20.38 E.01641 G1 X-79.83 Y-24.752 E.19014 G1 X-80.363 Y-24.752 E.01641 G1 X-84.202 Y-20.913 E.16693 G1 X-84.202 Y-21.447 E.01641 G1 X-80.897 Y-24.752 E.14372 G1 X-81.431 Y-24.752 E.01641 G1 X-84.202 Y-21.981 E.12051 G1 X-84.202 Y-22.514 E.01641 G1 X-81.964 Y-24.752 E.0973 G1 X-82.498 Y-24.752 E.01641 G1 X-84.202 Y-23.048 E.07409 G1 X-84.202 Y-23.582 E.01641 G1 X-83.032 Y-24.752 E.05088 G1 X-83.566 Y-24.752 E.01641 G1 X-84.372 Y-23.946 E.03505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.61 Y-10.966 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-84.825 Y-11.752 E.03416 G1 X-85.358 Y-11.752 E.01641 G1 X-85.749 Y-11.361 E.01698 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-85.358 Y-11.752 G1 X-84.825 Y-11.752 G1 X-85.471 Y-11.106 ;WIPE_END G1 X-88.055 Y-3.924 Z2.4 F30000 G1 X-90.872 Y3.901 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-85.418 Y-1.552 E.23715 G1 X-85.952 Y-1.552 E.01641 G1 X-90.702 Y3.198 E.20657 G1 X-90.702 Y2.664 E.01641 G1 X-86.486 Y-1.552 E.18336 G1 X-87.019 Y-1.552 E.01641 G1 X-90.702 Y2.131 E.16015 G1 X-90.702 Y1.597 E.01641 G1 X-87.383 Y-1.722 E.14432 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.244 Y-1.356 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-89.706 Y-1.356 E.04491 ;WIDTH:0.43955 G1 X-89.788 Y-1.405 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y-1.454 E.0034 ;WIDTH:0.53712 G1 X-89.953 Y-1.502 E.00386 G1 X-89.953 Y-6.244 E.19095 G1 X-90.447 Y-6.394 E.0208 G1 X-90.447 Y-1.544 E.19529 ;WIDTH:0.517753 G1 X-90.467 Y-1.263 E.01091 ;WIDTH:0.478651 G1 X-90.486 Y-.982 E.01001 ;WIDTH:0.422183 G1 X-90.506 Y-.701 E.00871 G1 X-90.506 Y.906 E.04966 G1 X-88.272 Y-1.328 E.09762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.275 Y-.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.519985 G1 F15000 G1 X-89.803 Y-.936 E.02051 G1 X-90.079 Y-1.208 E.01507 G1 X-90.079 Y-.125 E.04211 G1 X-89.303 Y-.9 E.04263 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-91.209 Y-8.258 F30000 ;TYPE:Gap infill ;WIDTH:0.119134 G1 F12000 G1 X-91.33 Y-8.396 E.00114 ;WIDTH:0.161125 G1 X-91.451 Y-8.534 E.00177 G1 X-91.508 Y-8.744 E.00209 G1 X-91.522 Y-11.294 F30000 ;WIDTH:0.41802 G1 F12000 G1 X-91.088 Y-12.572 E.04128 G1 X-91.522 Y-12.138 F30000 ;WIDTH:0.401723 G1 F12000 G1 X-90.244 Y-12.572 E.03949 G1 X-87.694 Y-12.558 F30000 ;WIDTH:0.161121 G1 F12000 G1 X-87.484 Y-12.501 E.00209 G1 X-87.346 Y-12.38 E.00177 ;WIDTH:0.11913 G1 X-87.208 Y-12.259 E.00114 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-87.346 Y-12.38 ;WIPE_END G1 X-85.37 Y-19.752 Z2.4 F30000 G1 X-84.054 Y-24.662 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-84.117 Y-24.625 E.00204 G1 X-84.052 Y-24.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.117 Y-24.625 G1 X-84.054 Y-24.662 ;WIPE_END G1 X-85.049 Y-17.095 Z2.4 F30000 G1 X-89.953 Y20.167 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537303 G1 F15000 G1 X-90.356 Y20.57 E.02299 G1 X-90.447 Y20.579 E.00368 G1 X-90.447 Y26.256 E.2287 ;WIDTH:0.517753 G1 X-90.467 Y26.529 E.01061 ;WIDTH:0.478651 G1 X-90.486 Y26.803 E.00973 ;WIDTH:0.420847 G1 X-90.506 Y27.076 E.00844 G1 X-90.506 Y28.636 E.04804 G1 X-88.314 Y26.444 E.09546 G1 X-89.706 Y26.444 E.04286 ;WIDTH:0.43955 G1 X-89.788 Y26.395 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y26.346 E.0034 ;WIDTH:0.536698 G1 X-89.953 Y26.298 E.00385 G1 X-89.953 Y20.207 E.24507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.322 Y26.862 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.50057 G1 F15000 G1 X-89.817 Y26.851 E.0185 G1 X-90.088 Y26.577 E.01438 G1 X-90.088 Y27.628 E.03922 G1 X-89.35 Y26.89 E.03896 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.447 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.435619 G1 F12000 G2 X-90.507 Y47.54 I4.023 J1.064 E.00865 ;WIDTH:0.397645 G1 X-90.527 Y47.659 E.0035 ;WIDTH:0.358142 G1 X-90.547 Y47.779 E.00311 ;WIDTH:0.318639 G1 X-90.566 Y47.899 E.00272 ;WIDTH:0.276878 G1 X-90.588 Y48.032 E.00258 ;WIDTH:0.232118 G1 X-90.612 Y48.272 E.00371 ;WIDTH:0.184233 G1 X-90.636 Y48.519 E.00286 ;WIDTH:0.14478 G1 X-90.651 Y49.003 E.00402 G2 X-90.635 Y49.489 I7.429 J-.004 E.00404 ;WIDTH:0.161417 G1 X-90.61 Y49.744 E.00248 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.635 Y49.489 ;WIPE_END G1 X-85.082 Y44.253 Z2.4 F30000 G1 X6.16 Y-41.79 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z2.4 F30000 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z2.4 F30000 G1 Z2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z2.4 F30000 G1 X74.198 Y15.448 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z2.4 F30000 G1 X90.96 Y7.29 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z2.4 F30000 G1 X75.04 Y16.29 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X75.256 Y15.237 Z2.4 F30000 G1 Z2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.03751 G1 X76.387 Y14.739 E.01651 G1 X76.04 Y14.326 E.01791 G1 X74.833 Y13.671 E.04554 G1 X74.695 Y13.343 E.01179 G3 X75.577 Y11.705 I2.986 J.551 E.06272 G1 X76.387 Y11.265 E.03055 G1 X76.387 Y9.498 E.05863 G1 X76.04 Y9.084 E.01791 G1 X74.833 Y8.429 E.04554 G3 X74.767 Y7.763 I.707 J-.407 E.02288 G1 X74.313 Y7.763 E.01505 G1 X74.313 Y8.938 E.03896 G1 X77.223 Y7 F30000 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X91.178 Y7 E.1651 G1 X91.226 Y7.024 E.00064 ;WIDTH:0.260421 G1 X91.274 Y7.048 E.00096 ;WIDTH:0.308755 G1 X91.323 Y7.073 E.00117 ;WIDTH:0.346671 G1 X91.336 Y7.086 E.00048 ;WIDTH:0.374169 G1 X91.35 Y7.1 E.00052 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.24737 G1 X91.336 Y15.914 E.00055 ;WIDTH:0.346671 G1 X91.323 Y15.928 E.00048 ;WIDTH:0.308756 G1 X91.274 Y15.952 E.00117 ;WIDTH:0.260422 G1 X91.226 Y15.976 E.00096 ;WIDTH:0.212089 G1 X91.178 Y16 E.00074 ;WIDTH:0.187921 G1 X77.223 Y16 E.16489 G1 X74.15 Y15.651 F30000 ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X69.268 Y21.519 Z2.4 F30000 G1 X55.548 Y38.01 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z2.4 F30000 G1 Z2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z2.4 F30000 G1 X33.195 Y38.745 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z2.4 F30000 G1 X3.102 Y40.648 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z2.4 F30000 G1 X33.602 Y39.152 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z2.4 F30000 G1 X2.695 Y41.055 Z2.4 G1 Z2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 ;LAYER_CHANGE ;Z:2.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.6 I1.128 J-.456 P1 F30000 G1 X-16.24 Y-6.41 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-19.244 Y2.614 Z2.6 F30000 G1 X-31.398 Y31.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.032 Y25.231 Z2.6 F30000 G1 X-64.59 Y-6.456 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.609 Y-6.68 E.00744 G3 X-63.761 Y-8.389 I2.152 J.002 E.06557 G3 X-62.626 Y-8.823 I1.324 J1.763 E.04085 G3 X-64.591 Y-6.398 I.169 J2.145 E.33268 G1 X-64.591 Y-6.416 E.00061 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.183 Y-6.483 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.202 Y-6.68 E.00656 G3 X-63.323 Y-8.192 I1.744 J.002 E.06078 G3 X-62.599 Y-8.417 I.851 J1.468 E.02535 G3 X-64.186 Y-6.443 I.142 J1.739 E.26958 G1 X-63.749 Y-6.512 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.767 Y-6.68 E.0052 G3 X-62.951 Y-7.891 I1.309 J.002 E.04757 G3 X-62.571 Y-7.983 I.527 J1.348 E.01207 G3 X-63.751 Y-6.476 I.113 J1.304 E.18676 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.767 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.708 Y-7.959 ;WIPE_END G1 X-55.106 Y-7.27 Z2.6 F30000 G1 X-40.431 Y-5.939 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.467 Y-5.859 E.00293 G3 X-43.761 Y-8.389 I-1.99 J-.819 E.26204 G3 X-42.626 Y-8.823 I1.324 J1.763 E.04085 G3 X-40.378 Y-6.125 I.169 J2.145 E.13627 G1 X-40.42 Y-5.978 E.00508 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.817 Y-6.07 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.844 Y-6.015 E.00205 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.22007 G3 X-42.599 Y-8.417 I.851 J1.468 E.02535 G3 X-40.772 Y-6.23 I.142 J1.739 E.11062 G1 X-40.806 Y-6.109 E.00419 G1 X-41.229 Y-6.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.247 Y-6.182 E.00103 G3 X-42.951 Y-7.891 I-1.211 J-.497 E.15831 G3 X-42.571 Y-7.983 I.527 J1.348 E.01207 G3 X-41.192 Y-6.343 I.113 J1.304 E.07708 G1 X-41.218 Y-6.249 E.00301 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.247 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.831 Y-5.437 ;WIPE_END G1 X-38.271 Y.684 Z2.6 F30000 G1 X-20.002 Y25.21 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.23 Y29.653 Z2.6 F30000 G1 X-33.193 Y45.338 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.274 Y45.31 E.00285 G3 X-33.894 Y41.727 I.825 J-1.988 E.14364 G3 X-32.626 Y41.177 I1.409 J1.511 E.04675 G3 X-33.007 Y45.4 I.177 J2.145 E.24888 G1 X-33.155 Y45.351 E.00517 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.062 Y44.952 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.119 Y44.936 E.00197 G3 X-33.323 Y41.808 I.662 J-1.614 E.12922 G3 X-32.599 Y41.583 I.851 J1.468 E.02535 G3 X-32.902 Y45.009 I.142 J1.739 E.20142 G1 X-33.025 Y44.966 E.00429 G1 X-32.92 Y44.539 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.532 E.001 G3 X-32.951 Y42.109 I.494 J-1.211 E.09516 G3 X-32.571 Y42.017 I.527 J1.348 E.01207 G3 X-32.621 Y44.619 I.113 J1.303 E.1348 G1 X-32.882 Y44.549 E.00829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.532 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.661 Y43.821 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.749 Y43.149 G1 X-33.693 Y42.941 ;WIPE_END G1 X-41.312 Y43.404 Z2.6 F30000 G1 X-73.185 Y45.341 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.275 Y45.311 E.00313 G3 X-73.761 Y41.611 I.817 J-1.99 E.14987 G3 X-72.626 Y41.177 I1.324 J1.763 E.04085 G3 X-73.008 Y45.401 I.168 J2.144 E.24818 G1 X-73.147 Y45.353 E.00489 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.054 Y44.955 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.119 Y44.936 E.00225 G3 X-73.323 Y41.808 I.662 J-1.614 E.12922 G3 X-72.599 Y41.583 I.851 J1.468 E.02535 G3 X-72.902 Y45.009 I.142 J1.739 E.20142 G1 X-73.017 Y44.968 E.00401 G1 X-72.912 Y44.541 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.952 Y44.532 E.00125 G3 X-72.951 Y42.109 I.494 J-1.211 E.09516 G3 X-72.571 Y42.017 I.527 J1.348 E.01207 G3 X-72.621 Y44.619 I.113 J1.303 E.1348 G1 X-72.874 Y44.552 E.00804 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.952 Y44.532 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.702 Y42.948 ;WIPE_END G1 X-77.863 Y36.549 Z2.6 F30000 G1 X-88.66 Y19.948 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-79.786 Y17.485 Z2.6 F30000 G1 X-18.794 Y-11.948 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-18.044 Y-7.252 I2.847 J1.953 E.174 G1 X-20.002 Y-7.252 E.06494 G1 X-20.002 Y-1.748 E.18258 G1 X-15.398 Y-1.748 E.15273 G1 X-15.398 Y-6.595 E.1608 G2 X-14.002 Y-7.156 I-.443 J-3.121 E.05038 G1 X-14.002 Y49.948 E1.89424 G1 X-14.624 Y49.948 E.02063 G2 X-21.276 Y49.948 I-3.326 J-.939 E.42323 G1 X-83.624 Y49.948 E2.0682 G2 X-90.276 Y49.948 I-3.326 J-.939 E.42323 G1 X-90.898 Y49.948 E.02063 G1 X-90.898 Y-7.156 E1.89424 G2 X-89.502 Y-6.595 I1.925 J-2.774 E.05032 G1 X-89.502 Y-1.748 E.1608 G1 X-84.898 Y-1.748 E.15273 G1 X-84.898 Y-7.252 E.18258 G1 X-86.856 Y-7.252 E.06494 G2 X-86.106 Y-11.948 I-2.097 J-2.743 E.174 G1 X-84.398 Y-11.948 E.05666 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-18.834 Y-11.948 E.05533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.928 Y-12.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-18.367 Y-11.855 E.02208 G2 X-16.715 Y-7.049 I2.431 J1.851 E.19901 G1 X-16.749 Y-6.845 E.00687 G1 X-19.595 Y-6.845 E.09441 G1 X-19.595 Y-2.155 E.15558 G1 X-15.805 Y-2.155 E.12572 G1 X-15.805 Y-6.963 E.15949 G2 X-14.095 Y-7.583 I-.161 J-3.109 E.06121 G1 X-13.595 Y-8.022 E.02208 G1 X-13.595 Y50.355 E1.93647 G1 X-15.229 Y50.355 E.0542 G2 X-20.671 Y50.355 I-2.721 J-1.355 E.40997 G1 X-84.229 Y50.355 E2.10832 G2 X-89.671 Y50.355 I-2.721 J-1.355 E.40997 G1 X-91.305 Y50.355 E.0542 G1 X-91.305 Y-8.022 E1.93647 G1 X-90.805 Y-7.583 E.02208 G2 X-89.095 Y-6.963 I1.831 J-2.382 E.06128 G1 X-89.095 Y-2.155 E.15949 G1 X-85.305 Y-2.155 E.12572 G1 X-85.305 Y-6.845 E.15558 G1 X-88.151 Y-6.845 E.09441 G1 X-88.185 Y-7.049 E.00687 G2 X-86.533 Y-11.855 I-.781 J-2.955 E.19898 G1 X-86.972 Y-12.355 E.02208 G1 X-84.805 Y-12.355 E.07189 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-17.968 Y-12.355 E.07056 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-18.367 Y-11.855 G1 X-18.588 Y-11.523 G1 X-18.764 Y-11.166 G1 X-18.893 Y-10.788 G1 X-18.925 Y-10.627 ;WIPE_END G1 X-15.27 Y-12.52 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 M73 P26 R81 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-14.954 Y-12.404 E.01035 G3 X-17.539 Y-12.071 I-1.004 J2.406 E.41958 G3 X-16.173 Y-12.596 I1.606 J2.139 E.04556 G3 X-15.307 Y-12.522 I.214 J2.599 E.02683 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.954 Y-12.404 G1 X-14.645 Y-12.261 G1 X-14.361 Y-12.071 G1 X-14.104 Y-11.846 G1 X-13.879 Y-11.589 G1 X-13.733 Y-11.37 ;WIPE_END G1 X-21.349 Y-10.866 Z2.6 F30000 G1 X-88.66 Y-6.41 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-90.251 Y-7.737 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-90.257 Y-7.736 E.00018 G3 X-90.539 Y-12.071 I1.299 J-2.261 E.15777 G3 X-89.173 Y-12.596 I1.606 J2.139 E.04556 G3 X-90.059 Y-7.633 I.214 J2.599 E.2932 G1 X-90.216 Y-7.718 E.0055 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.257 Y-7.736 G1 X-90.539 Y-7.929 G1 X-90.796 Y-8.154 G1 X-91.021 Y-8.411 G1 X-91.211 Y-8.695 G1 X-91.362 Y-9.001 G1 X-91.441 Y-9.236 ;WIPE_END G1 X-83.818 Y-9.613 Z2.6 F30000 G1 X-19.66 Y-12.79 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-16.055 Y50.79 E.08896 G2 X-19.845 Y50.79 I-1.895 J-1.789 E.37273 G1 X-85.055 Y50.79 E2.00373 G2 X-88.845 Y50.79 I-1.895 J-1.789 E.37273 G1 X-91.74 Y50.79 E.08896 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-19.297 Y-11.683 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-19.361 Y-11.646 E.00204 G1 X-19.296 Y-11.611 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.692 Y-12.259 F30000 ;TYPE:Gap infill ;WIDTH:0.141342 G1 F12000 G1 X-17.554 Y-12.38 E.00147 ;WIDTH:0.163552 G1 X-17.416 Y-12.501 E.00181 ;WIDTH:0.175388 G1 X-17.206 Y-12.558 E.00235 G1 X-14.656 Y-12.572 F30000 ;WIDTH:0.418029 G1 F12000 G1 X-13.377 Y-12.138 E.04129 G1 X-13.812 Y-12.572 F30000 ;WIDTH:0.401732 G1 F12000 G1 X-13.377 Y-11.294 E.03949 G1 X-13.392 Y-8.744 F30000 ;WIDTH:0.17539 G1 F12000 G1 X-13.449 Y-8.534 E.00235 ;WIDTH:0.163548 G1 X-13.57 Y-8.396 E.00181 ;WIDTH:0.141339 G1 X-13.691 Y-8.258 E.00147 G1 X-15.143 Y-1.308 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.543316 G1 F15000 G1 X-14.471 Y-.636 E.03878 G2 X-14.453 Y-6.394 I-290.933 J-3.796 E.23479 G1 X-14.947 Y-6.244 E.02106 G1 X-14.947 Y-1.544 E.19163 G1 X-14.965 Y-1.41 E.00551 G1 X-15.109 Y-1.328 E.00674 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.947 Y20.41 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537316 G1 F15000 G1 X-14.949 Y26.299 E.23723 ;WIDTH:0.520873 G1 X-14.994 Y26.335 E.00226 ;WIDTH:0.480523 G1 X-15.039 Y26.372 E.00207 ;WIDTH:0.420313 G3 X-15.194 Y26.444 I-.171 J-.164 E.00539 G1 X-15.763 Y26.444 E.01748 G1 X-14.394 Y27.813 E.05953 G1 X-14.394 Y26.762 E.03232 ;WIDTH:0.43955 G1 X-14.414 Y26.593 E.00549 ;WIDTH:0.478651 G1 X-14.433 Y26.424 E.00603 ;WIDTH:0.536264 G1 X-14.453 Y26.256 E.00683 G1 X-14.453 Y20.575 E.22836 G1 X-14.656 Y20.639 E.00857 G3 X-14.919 Y20.439 I.188 J-.52 E.01349 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.799 Y26.708 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.536614 G1 F15000 G2 X-14.788 Y26.796 I-.03 J.048 E.01029 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.008 Y46.738 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F15000 G1 X-14.782 Y47.013 E.00986 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.453 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.427288 G1 F12000 G1 X-14.398 Y47.515 E.00768 ;WIDTH:0.401917 G3 X-14.373 Y47.659 I-2.179 J.447 E.00429 ;WIDTH:0.35815 G1 X-14.353 Y47.779 E.00311 ;WIDTH:0.318646 G1 X-14.334 Y47.899 E.00272 ;WIDTH:0.279141 G1 X-14.314 Y48.018 E.00233 ;WIDTH:0.257538 G1 X-14.312 Y48.032 E.00025 ;WIDTH:0.232125 G1 X-14.288 Y48.272 E.00371 ;WIDTH:0.184997 G1 X-14.265 Y48.511 E.00278 ;WIDTH:0.144792 G3 X-14.249 Y48.997 I-7.384 J.489 E.00404 G1 X-14.264 Y49.481 E.00402 ;WIDTH:0.178483 G1 X-14.29 Y49.744 E.00292 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.264 Y49.481 ;WIPE_END G1 X-21.897 Y49.49 Z2.6 F30000 G1 X-83.185 Y49.561 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-83.249 Y49.597 E.00204 G1 X-83.184 Y49.632 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-83.249 Y49.597 G1 X-83.185 Y49.561 ;WIPE_END G1 X-88.059 Y45.337 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-90.506 Y42.89 E.10632 G1 X-90.506 Y46.86 E.12197 G1 X-90.187 Y46.934 E.01006 G3 X-88.098 Y45.348 I3.107 J1.925 E.08244 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.745 Y45.184 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.129 Y43.801 E.06013 G1 X-90.129 Y46.23 E.07465 G1 X-89.55 Y45.672 E.0247 G3 X-88.781 Y45.203 I2.22 J2.77 E.02777 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.339 Y45.096 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.380059 G1 F15000 G1 X-89.772 Y44.663 E.01682 G1 X-89.772 Y45.393 E.02007 G1 X-89.372 Y45.119 E.01333 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.447 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.435619 G1 F12000 G2 X-90.507 Y47.54 I4.023 J1.064 E.00865 ;WIDTH:0.397645 G1 X-90.527 Y47.659 E.0035 ;WIDTH:0.358142 G1 X-90.547 Y47.779 E.00311 ;WIDTH:0.318639 G1 X-90.566 Y47.899 E.00272 ;WIDTH:0.276878 G1 X-90.588 Y48.032 E.00258 ;WIDTH:0.232118 G1 X-90.612 Y48.272 E.00371 ;WIDTH:0.184233 G1 X-90.636 Y48.519 E.00286 ;WIDTH:0.14478 G1 X-90.651 Y49.003 E.00402 G2 X-90.635 Y49.489 I7.429 J-.004 E.00404 ;WIDTH:0.161417 G1 X-90.61 Y49.744 E.00248 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.635 Y49.489 ;WIPE_END G1 X-90.027 Y41.881 Z2.6 F30000 G1 X-88.243 Y19.556 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X-90.506 Y17.293 E.09831 G1 X-90.506 Y18.901 E.04939 ;WIDTH:0.43955 G1 X-90.486 Y19.182 E.00911 ;WIDTH:0.478651 G1 X-90.467 Y19.463 E.01001 ;WIDTH:0.536866 G1 X-90.447 Y19.744 E.01135 G1 X-90.447 Y25.41 E.22806 G1 X-90.33 Y25.394 E.00475 G1 X-89.953 Y25.763 E.02123 G1 X-89.953 Y19.744 E.24223 ;WIDTH:0.517753 G1 X-89.87 Y19.682 E.00401 ;WIDTH:0.478651 G1 X-89.788 Y19.619 E.00368 ;WIDTH:0.422655 G1 X-89.706 Y19.556 E.00321 G1 X-88.283 Y19.556 E.04401 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.275 Y19.129 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.520147 G1 F15000 G1 X-90.079 Y18.325 E.04422 G1 X-90.079 Y19.46 E.04415 G1 X-89.803 Y19.136 E.01655 G1 X-89.315 Y19.129 E.01897 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.953 Y-1.967 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537303 G1 F15000 G1 X-89.953 Y-6.244 E.17228 G1 X-90.447 Y-6.394 E.02081 G1 X-90.447 Y-2.379 E.16175 G1 X-90.356 Y-2.37 E.0037 G1 X-89.981 Y-1.996 E.02134 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-91.209 Y-8.258 F30000 ;TYPE:Gap infill ;WIDTH:0.119134 G1 F12000 G1 X-91.33 Y-8.396 E.00114 ;WIDTH:0.161125 G1 X-91.451 Y-8.534 E.00177 G1 X-91.508 Y-8.744 E.00209 G1 X-91.522 Y-11.294 F30000 ;WIDTH:0.41802 G1 F12000 G1 X-91.088 Y-12.572 E.04129 G1 X-91.522 Y-12.138 F30000 ;WIDTH:0.401723 G1 F12000 G1 X-90.244 Y-12.572 E.03949 G1 X-87.694 Y-12.558 F30000 ;WIDTH:0.161123 G1 F12000 G1 X-87.484 Y-12.501 E.00209 G1 X-87.346 Y-12.38 E.00177 ;WIDTH:0.11913 G1 X-87.208 Y-12.259 E.00114 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-87.346 Y-12.38 ;WIPE_END G1 X-85.989 Y-7.638 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-86.053 Y-7.601 E.00204 G1 X-85.988 Y-7.567 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.814 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420295 G1 F15000 G1 X-20.698 Y-22.806 E.09202 G1 X-20.698 Y-22.272 E.01641 G1 X-23.178 Y-24.752 E.10785 G1 X-23.712 Y-24.752 E.01641 G1 X-20.698 Y-21.738 E.13106 G1 X-20.698 Y-21.205 E.01641 G1 X-24.245 Y-24.752 E.15427 G1 X-24.779 Y-24.752 E.01641 G1 X-20.698 Y-20.671 E.17748 G1 X-20.698 Y-20.137 E.01641 G1 X-25.313 Y-24.752 E.20069 G1 X-25.847 Y-24.752 E.01641 G1 X-20.698 Y-19.603 E.2239 G1 X-20.698 Y-19.07 E.01641 G1 X-26.38 Y-24.752 E.24711 G1 X-26.914 Y-24.752 E.01641 G1 X-20.698 Y-18.536 E.27032 G1 X-20.698 Y-18.002 E.01641 G1 X-27.448 Y-24.752 E.29353 G1 X-27.981 Y-24.752 E.01641 G1 X-20.698 Y-17.469 E.31674 G1 X-20.698 Y-16.935 E.01641 G1 X-28.515 Y-24.752 E.33995 G1 X-29.049 Y-24.752 E.01641 G1 X-20.698 Y-16.401 E.36316 G1 X-20.698 Y-15.868 E.01641 G1 X-29.582 Y-24.752 E.38637 G1 X-30.116 Y-24.752 E.01641 G1 X-20.698 Y-15.334 E.40958 G1 X-20.698 Y-14.8 E.01641 G1 X-30.65 Y-24.752 E.43279 G1 X-31.183 Y-24.752 E.01641 G1 X-20.698 Y-14.267 E.45599 G1 X-20.698 Y-13.733 E.01641 G1 X-31.717 Y-24.752 E.4792 G1 X-32.251 Y-24.752 E.01641 G1 X-20.698 Y-13.199 E.50241 G1 X-20.698 Y-12.665 E.01641 G1 X-32.954 Y-24.922 E.533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.954 Y-11.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.35 Y-11.317 E.02628 G2 X-19.482 Y-10.916 I1.459 J.703 E.01304 G1 X-20.318 Y-11.752 E.03636 G1 X-20.698 Y-11.752 E.01168 G1 X-20.698 Y-12.132 E.01168 G1 X-33.318 Y-24.752 E.54883 G1 X-33.852 Y-24.752 E.01641 G1 X-19.57 Y-10.47 E.6211 G1 X-19.598 Y-9.965 E.01556 G1 X-34.386 Y-24.752 E.64307 G1 X-34.919 Y-24.752 E.01641 G1 X-19.539 Y-9.372 E.66885 G2 X-19.333 Y-8.632 I2.916 J-.415 E.02371 G1 X-35.453 Y-24.752 E.70105 G1 X-35.987 Y-24.752 E.01641 G1 X-18.683 Y-7.448 E.75252 G1 X-19.217 Y-7.448 E.01641 G1 X-36.52 Y-24.752 E.75252 G1 X-37.054 Y-24.752 E.01641 G1 X-19.75 Y-7.448 E.75252 G1 X-20.198 Y-7.448 E.01377 G1 X-20.198 Y-7.362 E.00264 G1 X-37.588 Y-24.752 E.75625 G1 X-38.121 Y-24.752 E.01641 G1 X-20.198 Y-6.829 E.77946 G1 X-20.198 Y-6.295 E.01641 G1 X-38.655 Y-24.752 E.80267 G1 X-39.189 Y-24.752 E.01641 G1 X-20.198 Y-5.761 E.82588 G1 X-20.198 Y-5.228 E.01641 G1 X-39.722 Y-24.752 E.84909 G1 X-40.256 Y-24.752 E.01641 G1 X-20.198 Y-4.694 E.8723 G1 X-20.198 Y-4.16 E.01641 G1 X-40.79 Y-24.752 E.89551 G1 X-41.324 Y-24.752 E.01641 G1 X-20.198 Y-3.626 E.91872 G1 X-20.198 Y-3.093 E.01641 G1 X-41.857 Y-24.752 E.94193 G1 X-42.391 Y-24.752 E.01641 G1 X-20.028 Y-2.389 E.97252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y.408 F30000 M73 P26 R80 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-15.989 Y-1.552 E.08525 G1 X-16.522 Y-1.552 E.01641 G1 X-14.198 Y.772 E.10108 G1 X-14.198 Y1.306 E.01641 G1 X-17.056 Y-1.552 E.12429 G1 X-17.59 Y-1.552 E.01641 G1 X-14.198 Y1.84 E.1475 G1 X-14.198 Y2.374 E.01641 G1 X-18.124 Y-1.552 E.17071 G1 X-18.657 Y-1.552 E.01641 G1 X-14.198 Y2.907 E.19392 G1 X-14.198 Y3.441 E.01641 G1 X-19.361 Y-1.722 E.22451 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y4.144 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.725 Y-1.552 E.24772 G1 X-20.198 Y-1.552 E.01456 G1 X-20.198 Y-2.025 E.01456 G1 X-42.925 Y-24.752 E.98835 G1 X-43.458 Y-24.752 E.01641 G1 X-14.198 Y4.508 E1.27249 G1 X-14.198 Y5.042 E.01641 G1 X-43.992 Y-24.752 E1.2957 G1 X-44.526 Y-24.752 E.01641 G1 X-14.198 Y5.576 E1.31891 G1 X-14.198 Y6.109 E.01641 G1 X-45.059 Y-24.752 E1.34212 G1 X-45.593 Y-24.752 E.01641 G1 X-14.198 Y6.643 E1.36533 G1 X-14.198 Y7.177 E.01641 G1 X-46.127 Y-24.752 E1.38854 G1 X-46.66 Y-24.752 E.01641 G1 X-14.198 Y7.71 E1.41175 G1 X-14.198 Y8.244 E.01641 G1 X-47.194 Y-24.752 E1.43496 G1 X-47.728 Y-24.752 E.01641 G1 X-14.198 Y8.778 E1.45817 G1 X-14.198 Y9.311 E.01641 G1 X-48.261 Y-24.752 E1.48138 G1 X-48.795 Y-24.752 E.01641 G1 X-14.198 Y9.845 E1.50459 G1 X-14.198 Y10.379 E.01641 G1 X-49.329 Y-24.752 E1.5278 G1 X-49.863 Y-24.752 E.01641 G1 X-14.198 Y10.913 E1.55101 G1 X-14.198 Y11.446 E.01641 G1 X-50.396 Y-24.752 E1.57422 G1 X-50.93 Y-24.752 E.01641 G1 X-14.198 Y11.98 E1.59743 G1 X-14.198 Y12.514 E.01641 G1 X-51.464 Y-24.752 E1.62063 G1 X-51.997 Y-24.752 E.01641 G1 X-14.198 Y13.047 E1.64384 G1 X-14.198 Y13.581 E.01641 G1 X-52.531 Y-24.752 E1.66705 G1 X-53.065 Y-24.752 E.01641 G1 X-14.198 Y14.115 E1.69026 G1 X-14.198 Y14.648 E.01641 G1 X-53.598 Y-24.752 E1.71347 G1 X-54.132 Y-24.752 E.01641 G1 X-14.198 Y15.182 E1.73668 G1 X-14.198 Y15.716 E.01641 G1 X-54.666 Y-24.752 E1.75989 G1 X-55.199 Y-24.752 E.01641 G1 X-14.198 Y16.249 E1.7831 G1 X-14.198 Y16.783 E.01641 G1 X-55.733 Y-24.752 E1.80631 G1 X-56.267 Y-24.752 E.01641 G1 X-14.198 Y17.317 E1.82952 G1 X-14.198 Y17.851 E.01641 G1 X-56.8 Y-24.752 E1.85273 G1 X-57.334 Y-24.752 E.01641 G1 X-14.198 Y18.384 E1.87594 G1 X-14.198 Y18.463 E.00244 G1 X-14.216 Y18.481 E.00076 G1 X-14.216 Y18.9 E.0129 G1 X-40.123 Y-7.007 E1.1267 G3 X-40.113 Y-6.464 I-2.933 J.326 E.01675 G1 X-14.216 Y19.434 E1.12626 G1 X-14.216 Y19.968 E.01641 G1 X-40.198 Y-6.015 E1.12997 G3 X-40.351 Y-5.634 I-1.525 J-.387 E.01267 G1 X-14.574 Y20.144 E1.12102 G1 X-14.612 Y20.182 E.00169 G1 X-15.256 Y19.539 E.02799 G1 X-15.452 Y19.734 E.00851 G1 X-15.516 Y19.734 E.00199 G1 X-40.551 Y-5.3 E1.08872 G3 X-40.795 Y-5.011 I-3.296 J-2.541 E.01165 G1 X-16.05 Y19.734 E1.07615 G1 X-16.584 Y19.734 E.01641 G1 X-41.087 Y-4.769 E1.06564 G3 X-41.423 Y-4.571 I-.921 J-1.175 E.01202 G1 X-17.117 Y19.734 E1.05702 G1 X-17.651 Y19.734 E.01641 G1 X-41.807 Y-4.421 E1.0505 G3 X-42.261 Y-4.342 I-.71 J-2.72 E.01419 G1 X-18.185 Y19.734 E1.04704 G1 X-18.719 Y19.734 E.01641 G1 X-43.033 Y-4.58 E1.05739 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.618 Y-3.166 ;WIPE_END G1 X-41.907 Y-8.791 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-57.868 Y-24.752 E.69414 G1 X-58.402 Y-24.752 E.01641 G1 X-42.665 Y-9.015 E.68438 G1 X-43.115 Y-8.932 E.01408 G1 X-58.935 Y-24.752 E.68801 G1 X-59.469 Y-24.752 E.01641 G1 X-43.496 Y-8.779 E.69462 G2 X-43.83 Y-8.579 I.593 J1.366 E.012 G1 X-60.003 Y-24.752 E.70333 G1 X-60.536 Y-24.752 E.01641 G1 X-44.119 Y-8.335 E.71397 G2 X-44.361 Y-8.043 I.988 J1.064 E.01169 G1 X-61.07 Y-24.752 E.72667 G1 X-61.604 Y-24.752 E.01641 G1 X-44.559 Y-7.707 E.74126 G2 X-44.708 Y-7.323 I1.936 J.973 E.0127 G1 X-62.137 Y-24.752 E.75797 G1 X-62.671 Y-24.752 E.01641 G1 X-44.788 Y-6.869 E.7777 G2 X-44.769 Y-6.317 I2.558 J.189 E.01704 G1 X-63.205 Y-24.752 E.80173 G1 X-63.738 Y-24.752 E.01641 G1 X-19.252 Y19.734 E1.93466 G1 X-19.678 Y19.734 E.01309 G3 X-19.768 Y19.752 I-.074 J-.141 E.00288 G1 X-31.202 Y8.318 E.49723 G1 X-31.202 Y8.852 E.01641 G1 X-20.198 Y19.856 E.47854 G1 X-20.198 Y20.39 E.01641 G1 X-31.202 Y9.386 E.47854 G1 X-31.202 Y9.919 E.01641 G1 X-20.198 Y20.923 E.47854 G1 X-20.198 Y21.457 E.01641 G1 X-31.202 Y10.453 E.47854 G1 X-31.202 Y10.987 E.01641 G1 X-20.198 Y21.991 E.47854 G1 X-20.198 Y22.524 E.01641 G1 X-31.202 Y11.521 E.47854 G1 X-31.202 Y12.054 E.01641 G1 X-20.198 Y23.058 E.47854 G1 X-20.198 Y23.592 E.01641 G1 X-31.202 Y12.588 E.47854 G1 X-31.202 Y13.122 E.01641 G1 X-20.198 Y24.125 E.47854 G1 X-20.198 Y24.659 E.01641 G1 X-31.202 Y13.655 E.47854 G1 X-31.202 Y14.189 E.01641 G1 X-20.028 Y25.362 E.48592 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.644 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-14.198 Y28.524 E.10637 G1 X-14.198 Y29.058 E.01641 G1 X-17.008 Y26.248 E.1222 G1 X-17.542 Y26.248 E.01641 G1 X-14.198 Y29.592 E.14541 G1 X-14.198 Y30.125 E.01641 G1 X-18.075 Y26.248 E.16862 G1 X-18.609 Y26.248 E.01641 G1 X-14.198 Y30.659 E.19183 G1 X-14.198 Y31.193 E.01641 G1 X-19.312 Y26.078 E.22241 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y31.896 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-19.676 Y26.248 E.24562 G1 X-20.198 Y26.248 E.01604 G1 X-20.198 Y25.726 E.01604 G1 X-31.202 Y14.723 E.47854 G1 X-31.202 Y15.256 E.01641 G1 X-14.198 Y32.26 E.73947 G1 X-14.198 Y32.794 E.01641 G1 X-31.202 Y15.79 E.73947 G1 X-31.202 Y16.324 E.01641 G1 X-14.198 Y33.327 E.73947 G1 X-14.198 Y33.861 E.01641 G1 X-31.202 Y16.857 E.73947 G1 X-31.202 Y17.391 E.01641 G1 X-14.198 Y34.395 E.73947 G1 X-14.198 Y34.929 E.01641 G1 X-31.202 Y17.925 E.73947 G1 X-31.202 Y18.458 E.01641 G1 X-14.198 Y35.462 E.73947 G1 X-14.198 Y35.996 E.01641 G1 X-31.202 Y18.992 E.73947 G1 X-31.202 Y19.526 E.01641 G1 X-14.198 Y36.53 E.73947 G1 X-14.198 Y37.063 E.01641 G1 X-31.202 Y20.06 E.73947 G1 X-31.202 Y20.593 E.01641 G1 X-14.198 Y37.597 E.73947 G1 X-14.198 Y38.131 E.01641 G1 X-31.202 Y21.127 E.73947 G1 X-31.202 Y21.661 E.01641 G1 X-14.198 Y38.664 E.73947 G1 X-14.198 Y39.198 E.01641 G1 X-31.202 Y22.194 E.73947 G1 X-31.202 Y22.728 E.01641 G1 X-14.198 Y39.732 E.73947 G1 X-14.198 Y40.265 E.01641 G1 X-31.202 Y23.262 E.73947 G1 X-31.202 Y23.795 E.01641 G1 X-14.198 Y40.799 E.73947 G1 X-14.198 Y41.333 E.01641 G1 X-31.202 Y24.329 E.73947 G1 X-31.202 Y24.863 E.01641 G1 X-14.198 Y41.867 E.73947 G1 X-14.198 Y42.4 E.01641 G1 X-31.202 Y25.396 E.73947 G1 X-31.202 Y25.93 E.01641 G1 X-14.198 Y42.934 E.73947 G1 X-14.198 Y43.468 E.01641 G1 X-31.202 Y26.464 E.73947 G1 X-31.202 Y26.997 E.01641 G1 X-14.198 Y44.001 E.73947 G1 X-14.198 Y44.535 E.01641 G1 X-31.202 Y27.531 E.73947 G1 X-31.202 Y28.065 E.01641 G1 X-14.198 Y45.069 E.73947 G1 X-14.198 Y45.602 E.01641 G1 X-31.202 Y28.599 E.73947 G1 X-31.202 Y29.132 E.01641 G1 X-14.198 Y46.136 E.73947 G1 X-14.198 Y46.67 E.01641 G1 X-31.202 Y29.666 E.73947 G1 X-31.202 Y30.2 E.01641 G1 X-14.35 Y47.051 E.73285 G1 X-14.396 Y47.062 E.00145 G1 X-15.783 Y45.675 E.0603 G1 X-16.018 Y45.91 E.01021 G1 X-16.041 Y45.894 E.00087 G1 X-31.202 Y30.733 E.65933 G1 X-31.202 Y31.267 E.01641 G1 X-16.99 Y45.479 E.61805 G1 X-17.005 Y45.474 E.00048 G2 X-17.633 Y45.37 I-.707 J2.331 E.01961 G1 X-31.202 Y31.801 E.59011 G1 X-31.202 Y32.248 E.01376 G1 X-31.288 Y32.248 E.00265 G1 X-18.172 Y45.364 E.57039 G2 X-18.646 Y45.424 I-.008 J1.828 E.01472 G1 X-31.822 Y32.248 E.57301 G1 X-32.356 Y32.248 E.01641 G1 X-19.07 Y45.533 E.57775 G2 X-19.456 Y45.681 I.368 J1.54 E.01274 G1 X-32.889 Y32.248 E.58418 G1 X-33.423 Y32.248 E.01641 G1 X-19.81 Y45.861 E.59202 G1 X-20.13 Y46.075 E.01183 G1 X-33.957 Y32.248 E.60132 G1 X-34.49 Y32.248 E.01641 G1 X-20.419 Y46.32 E.61195 G2 X-20.682 Y46.59 I.895 J1.135 E.01164 G1 X-35.024 Y32.248 E.62372 G1 X-35.558 Y32.248 E.01641 G1 X-20.919 Y46.887 E.63661 G2 X-21.129 Y47.21 I1.124 J.96 E.0119 G1 X-36.091 Y32.248 E.65068 G1 X-36.625 Y32.248 E.01641 G1 X-21.306 Y47.568 E.66623 G2 X-21.445 Y47.962 I1.428 J.726 E.0129 G1 X-37.159 Y32.248 E.68338 G1 X-37.692 Y32.248 E.01641 G1 X-21.544 Y48.396 E.70226 G2 X-21.593 Y48.881 I1.817 J.428 E.01503 G1 X-38.226 Y32.248 E.72335 G1 X-38.76 Y32.248 E.01641 G1 X-21.572 Y49.436 E.74747 G2 X-21.515 Y49.752 I1.23 J-.06 E.00991 G1 X-21.79 Y49.752 E.00845 G1 X-39.293 Y32.248 E.76122 G1 X-39.827 Y32.248 E.01641 G1 X-22.323 Y49.752 E.76122 G1 X-22.857 Y49.752 E.01641 G1 X-40.361 Y32.248 E.76122 G1 X-40.895 Y32.248 E.01641 G1 X-32.154 Y40.989 E.38011 G2 X-32.688 Y40.989 I-.267 J2.114 E.01645 G1 X-41.428 Y32.248 E.38011 G1 X-41.962 Y32.248 E.01641 G1 X-33.135 Y41.075 E.38388 G2 X-33.514 Y41.229 I.396 J1.519 E.01263 G1 X-42.496 Y32.248 E.39059 G1 X-43.029 Y32.248 E.01641 G1 X-33.846 Y41.432 E.39937 G2 X-34.125 Y41.686 I1.204 J1.599 E.01163 G1 X-43.563 Y32.248 E.41045 G1 X-44.097 Y32.248 E.01641 G1 X-34.371 Y41.973 E.42294 G2 X-34.568 Y42.311 I1.183 J.914 E.01204 G1 X-44.63 Y32.248 E.43761 G1 X-45.164 Y32.248 E.01641 G1 X-34.716 Y42.697 E.45439 G2 X-34.79 Y43.156 I3.008 J.723 E.01432 G1 X-45.698 Y32.248 E.47436 G1 X-46.231 Y32.248 E.01641 G1 X-34.537 Y43.943 E.5086 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-35.951 Y42.529 ;WIPE_END G1 X-30.333 Y42.81 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-23.391 Y49.752 E.3019 G1 X-23.924 Y49.752 E.01641 G1 X-30.115 Y43.561 E.26922 G3 X-30.205 Y44.005 I-2.674 J-.313 E.01393 G1 X-24.458 Y49.752 E.24993 G1 X-24.992 Y49.752 E.01641 G1 X-30.359 Y44.384 E.23343 G3 X-30.561 Y44.716 I-1.36 J-.602 E.01198 G1 X-25.526 Y49.752 E.21901 G1 X-26.059 Y49.752 E.01641 G1 X-30.81 Y45.001 E.20659 G3 X-31.103 Y45.241 I-1.058 J-.996 E.0117 G1 X-26.593 Y49.752 E.19615 G1 X-27.127 Y49.752 E.01641 G1 X-31.441 Y45.438 E.18762 G3 X-31.827 Y45.586 I-.754 J-1.391 E.01274 G1 X-27.66 Y49.752 E.18119 G1 X-28.194 Y49.752 E.01641 G1 X-32.286 Y45.66 E.17795 G3 X-32.847 Y45.633 I-.164 J-2.409 E.01731 G1 X-28.728 Y49.752 E.17913 G1 X-29.261 Y49.752 E.01641 G1 X-46.765 Y32.248 E.76122 G1 X-47.299 Y32.248 E.01641 G1 X-29.795 Y49.752 E.76122 G1 X-30.329 Y49.752 E.01641 G1 X-47.832 Y32.248 E.76122 G1 X-48.366 Y32.248 E.01641 G1 X-30.862 Y49.752 E.76122 G1 X-31.396 Y49.752 E.01641 G1 X-48.9 Y32.248 E.76122 G1 X-49.434 Y32.248 E.01641 G1 X-31.93 Y49.752 E.76122 G1 X-32.463 Y49.752 E.01641 G1 X-49.967 Y32.248 E.76122 G1 X-50.501 Y32.248 E.01641 G1 X-32.997 Y49.752 E.76122 G1 X-33.531 Y49.752 E.01641 G1 X-51.035 Y32.248 E.76122 G1 X-51.568 Y32.248 E.01641 G1 X-34.065 Y49.752 E.76122 G1 X-34.598 Y49.752 E.01641 G1 X-52.102 Y32.248 E.76122 G1 X-52.636 Y32.248 E.01641 G1 X-35.132 Y49.752 E.76122 G1 X-35.666 Y49.752 E.01641 G1 X-53.169 Y32.248 E.76122 G1 X-53.703 Y32.248 E.01641 G1 X-36.199 Y49.752 E.76122 G1 X-36.733 Y49.752 E.01641 G1 X-54.237 Y32.248 E.76122 G1 X-54.77 Y32.248 E.01641 G1 X-37.267 Y49.752 E.76122 G1 X-37.8 Y49.752 E.01641 G1 X-55.304 Y32.248 E.76122 G1 X-55.838 Y32.248 E.01641 G1 X-38.334 Y49.752 E.76122 G1 X-38.868 Y49.752 E.01641 G1 X-56.372 Y32.248 E.76122 G1 X-56.905 Y32.248 E.01641 G1 X-39.401 Y49.752 E.76122 G1 X-39.935 Y49.752 E.01641 G1 X-57.439 Y32.248 E.76122 G1 X-57.973 Y32.248 E.01641 G1 X-40.469 Y49.752 E.76122 G1 X-41.003 Y49.752 E.01641 G1 X-58.506 Y32.248 E.76122 G1 X-59.04 Y32.248 E.01641 G1 X-41.536 Y49.752 E.76122 G1 X-42.07 Y49.752 E.01641 G1 X-59.574 Y32.248 E.76122 G1 X-60.107 Y32.248 E.01641 G1 X-42.604 Y49.752 E.76122 G1 X-43.137 Y49.752 E.01641 G1 X-60.641 Y32.248 E.76122 G1 X-61.175 Y32.248 E.01641 G1 X-43.671 Y49.752 E.76122 G1 X-44.205 Y49.752 E.01641 G1 X-61.708 Y32.248 E.76122 G1 X-62.242 Y32.248 E.01641 G1 X-44.738 Y49.752 E.76122 G1 X-45.272 Y49.752 E.01641 G1 X-62.776 Y32.248 E.76122 G1 X-63.309 Y32.248 E.01641 G1 X-45.806 Y49.752 E.76122 G1 X-46.339 Y49.752 E.01641 G1 X-63.843 Y32.248 E.76122 G1 X-64.377 Y32.248 E.01641 G1 X-46.873 Y49.752 E.76122 G1 X-47.407 Y49.752 E.01641 G1 X-64.911 Y32.248 E.76122 G1 X-65.444 Y32.248 E.01641 G1 X-47.94 Y49.752 E.76122 G1 X-48.474 Y49.752 E.01641 G1 X-65.978 Y32.248 E.76122 G1 X-66.512 Y32.248 E.01641 G1 X-49.008 Y49.752 E.76122 G1 X-49.542 Y49.752 E.01641 G1 X-67.045 Y32.248 E.76122 G1 X-67.579 Y32.248 E.01641 G1 X-50.075 Y49.752 E.76122 G1 X-50.609 Y49.752 E.01641 G1 X-68.113 Y32.248 E.76122 G1 X-68.646 Y32.248 E.01641 G1 X-51.143 Y49.752 E.76122 G1 X-51.676 Y49.752 E.01641 G1 X-69.18 Y32.248 E.76122 G1 X-69.714 Y32.248 E.01641 G1 X-52.21 Y49.752 E.76122 G1 X-52.744 Y49.752 E.01641 G1 X-70.247 Y32.248 E.76122 G1 X-70.781 Y32.248 E.01641 G1 X-53.277 Y49.752 E.76122 G1 X-53.811 Y49.752 E.01641 G1 X-71.315 Y32.248 E.76122 G1 X-71.848 Y32.248 E.01641 G1 X-54.345 Y49.752 E.76122 G1 X-54.878 Y49.752 E.01641 G1 X-72.382 Y32.248 E.76122 G1 X-72.916 Y32.248 E.01641 G1 X-55.242 Y49.922 E.7686 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-56.657 Y48.507 ;WIPE_END G1 X-52.647 Y42.013 Z2.6 F30000 G1 X-31.599 Y7.922 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-64.272 Y-24.752 E1.42093 G1 X-64.806 Y-24.752 E.01641 G1 X-32.302 Y7.752 E1.41355 G1 X-32.836 Y7.752 E.01641 G1 X-65.34 Y-24.752 E1.41355 G1 X-65.873 Y-24.752 E.01641 G1 X-33.369 Y7.752 E1.41355 G1 X-33.903 Y7.752 E.01641 G1 X-66.407 Y-24.752 E1.41355 G1 X-66.941 Y-24.752 E.01641 G1 X-34.437 Y7.752 E1.41355 G1 X-34.971 Y7.752 E.01641 G1 X-67.474 Y-24.752 E1.41355 G1 X-68.008 Y-24.752 E.01641 G1 X-35.504 Y7.752 E1.41355 G1 X-36.038 Y7.752 E.01641 G1 X-68.542 Y-24.752 E1.41355 G1 X-69.075 Y-24.752 E.01641 G1 X-36.572 Y7.752 E1.41355 G1 X-37.105 Y7.752 E.01641 G1 X-69.609 Y-24.752 E1.41355 G1 X-70.143 Y-24.752 E.01641 G1 X-37.639 Y7.752 E1.41355 G1 X-38.173 Y7.752 E.01641 G1 X-70.676 Y-24.752 E1.41355 G1 X-71.21 Y-24.752 E.01641 G1 X-38.706 Y7.752 E1.41355 G1 X-39.24 Y7.752 E.01641 G1 X-71.744 Y-24.752 E1.41355 G1 X-72.277 Y-24.752 E.01641 G1 X-39.774 Y7.752 E1.41355 G1 X-40.307 Y7.752 E.01641 G1 X-72.811 Y-24.752 E1.41355 G1 X-73.345 Y-24.752 E.01641 G1 X-40.841 Y7.752 E1.41355 G1 X-41.375 Y7.752 E.01641 G1 X-73.879 Y-24.752 E1.41355 G1 X-74.412 Y-24.752 E.01641 G1 X-41.908 Y7.752 E1.41355 G1 X-42.442 Y7.752 E.01641 G1 X-74.946 Y-24.752 E1.41355 G1 X-75.48 Y-24.752 E.01641 G1 X-42.976 Y7.752 E1.41355 G1 X-43.51 Y7.752 E.01641 G1 X-76.013 Y-24.752 E1.41355 G1 X-76.547 Y-24.752 E.01641 G1 X-44.043 Y7.752 E1.41355 G1 X-44.577 Y7.752 E.01641 G1 X-77.081 Y-24.752 E1.41355 G1 X-77.614 Y-24.752 E.01641 G1 X-61.799 Y-8.936 E.68781 G3 X-60.194 Y-7.331 I-.636 J2.241 E.07289 G1 X-45.111 Y7.752 E.65596 G1 X-45.644 Y7.752 E.01641 G1 X-60.101 Y-6.705 E.6287 G3 X-60.15 Y-6.22 I-2.901 J-.048 E.015 G1 X-46.178 Y7.752 E.60762 G1 X-46.712 Y7.752 E.01641 G1 X-60.269 Y-5.806 E.58961 G3 X-60.449 Y-5.452 I-3.158 J-1.382 E.01221 G1 X-47.245 Y7.752 E.57422 G1 X-47.779 Y7.752 E.01641 G1 X-60.676 Y-5.145 E.56088 G3 X-60.945 Y-4.88 I-1.141 J-.888 E.01164 G1 X-48.313 Y7.752 E.54935 G1 X-48.846 Y7.752 E.01641 G1 X-61.255 Y-4.657 E.53965 G3 X-61.617 Y-4.485 I-1.65 J-3.013 E.01233 G1 X-49.38 Y7.752 E.53219 G1 X-49.914 Y7.752 E.01641 G1 X-62.036 Y-4.371 E.52719 G3 X-62.534 Y-4.335 I-.427 J-2.448 E.01537 G1 X-50.278 Y7.922 E.53301 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-51.692 Y6.507 ;WIPE_END G1 X-56.626 Y.684 Z2.6 F30000 G1 X-78.318 Y-24.922 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-62.425 Y-9.029 E.69114 G2 X-62.906 Y-8.976 I.038 J2.546 E.01489 G1 X-78.682 Y-24.752 E.68607 G1 X-79.215 Y-24.752 E.01641 G1 X-63.324 Y-8.861 E.6911 G2 X-63.678 Y-8.681 I1.381 J3.157 E.01221 G1 X-79.749 Y-24.752 E.69892 G1 X-80.283 Y-24.752 E.01641 G1 X-63.985 Y-8.454 E.70878 G2 X-64.25 Y-8.185 I.888 J1.141 E.01164 G1 X-80.816 Y-24.752 E.72046 G1 X-81.35 Y-24.752 E.01641 G1 X-64.473 Y-7.875 E.73397 G2 X-64.639 Y-7.507 I2.04 J1.139 E.01243 G1 X-81.884 Y-24.752 E.74998 G1 X-82.418 Y-24.752 E.01641 G1 X-64.759 Y-7.094 E.76793 G2 X-64.795 Y-6.596 I2.448 J.427 E.01537 G1 X-82.951 Y-24.752 E.78958 G1 X-83.485 Y-24.752 E.01641 G1 X-64.678 Y-5.944 E.81791 G2 X-63.186 Y-4.452 I2.193 J-.701 E.06741 G1 X-50.981 Y7.752 E.53075 G1 X-51.515 Y7.752 E.01641 G1 X-84.019 Y-24.752 E1.41355 G1 X-84.202 Y-24.752 E.00564 G1 X-84.202 Y-24.401 E.01078 G1 X-52.049 Y7.752 E1.39831 G1 X-52.582 Y7.752 E.01641 G1 X-84.202 Y-23.868 E1.3751 G1 X-84.202 Y-23.334 E.01641 G1 X-53.116 Y7.752 E1.35189 G1 X-53.65 Y7.752 E.01641 G1 X-84.202 Y-22.8 E1.32868 G1 X-84.202 Y-22.267 E.01641 G1 X-54.183 Y7.752 E1.30547 G1 X-54.717 Y7.752 E.01641 G1 X-84.202 Y-21.733 E1.28226 G1 X-84.202 Y-21.199 E.01641 G1 X-55.251 Y7.752 E1.25906 G1 X-55.784 Y7.752 E.01641 G1 X-84.202 Y-20.666 E1.23585 G1 X-84.202 Y-20.132 E.01641 G1 X-56.318 Y7.752 E1.21264 G1 X-56.852 Y7.752 E.01641 G1 X-84.202 Y-19.598 E1.18943 G1 X-84.202 Y-19.065 E.01641 G1 X-57.385 Y7.752 E1.16622 G1 X-57.919 Y7.752 E.01641 G1 X-84.202 Y-18.531 E1.14301 G1 X-84.202 Y-17.997 E.01641 G1 X-58.453 Y7.752 E1.1198 G1 X-58.987 Y7.752 E.01641 G1 X-84.202 Y-17.463 E1.09659 G1 X-84.202 Y-16.93 E.01641 G1 X-59.52 Y7.752 E1.07338 G1 X-60.054 Y7.752 E.01641 G1 X-84.202 Y-16.396 E1.05017 G1 X-84.202 Y-15.862 E.01641 G1 X-60.588 Y7.752 E1.02696 G1 X-61.121 Y7.752 E.01641 G1 X-84.202 Y-15.329 E1.00375 G1 X-84.202 Y-14.795 E.01641 G1 X-61.655 Y7.752 E.98054 G1 X-62.189 Y7.752 E.01641 G1 X-84.202 Y-14.261 E.95733 G1 X-84.202 Y-13.728 E.01641 G1 X-62.722 Y7.752 E.93412 G1 X-63.256 Y7.752 E.01641 G1 X-84.202 Y-13.194 E.91091 G1 X-84.202 Y-12.66 E.01641 G1 X-63.79 Y7.752 E.8877 G1 X-64.323 Y7.752 E.01641 G1 X-84.202 Y-12.127 E.86449 G1 X-84.202 Y-11.752 E.01152 G1 X-84.361 Y-11.752 E.00489 G1 X-64.857 Y7.752 E.8482 G1 X-65.391 Y7.752 E.01641 G1 X-84.895 Y-11.752 E.8482 G1 X-85.428 Y-11.752 E.01641 G1 X-65.924 Y7.752 E.8482 G1 X-66.458 Y7.752 E.01641 G1 X-85.562 Y-11.352 E.83079 G3 X-85.358 Y-10.614 I-2.698 J1.143 E.0236 G1 X-66.992 Y7.752 E.79871 G1 X-67.526 Y7.752 E.01641 G1 X-85.301 Y-10.023 E.77302 G1 X-85.331 Y-9.52 E.01551 G1 X-68.059 Y7.752 E.75114 G1 X-68.593 Y7.752 E.01641 G1 X-85.42 Y-9.075 E.73178 G1 X-85.553 Y-8.674 E.01298 G1 X-69.127 Y7.752 E.71436 G1 X-69.66 Y7.752 E.01641 G1 X-85.722 Y-8.31 E.6985 G3 X-85.921 Y-7.975 I-1.369 J-.591 E.012 G1 X-85.224 Y-7.278 E.03031 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y-6.926 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-70.194 Y7.752 E.63831 G1 X-70.728 Y7.752 E.01641 G1 X-84.702 Y-6.222 E.60772 G1 X-84.702 Y-5.689 E.01641 G1 X-71.261 Y7.752 E.58451 G1 X-71.795 Y7.752 E.01641 G1 X-84.702 Y-5.155 E.5613 G1 X-84.702 Y-4.621 E.01641 G1 X-72.329 Y7.752 E.53809 G1 X-72.862 Y7.752 E.01641 G1 X-84.702 Y-4.088 E.51488 G1 X-84.702 Y-3.554 E.01641 G1 X-73.396 Y7.752 E.49168 G1 X-73.698 Y7.752 E.00929 G1 X-73.698 Y7.984 E.00712 G1 X-84.702 Y-3.02 E.47854 G1 X-84.702 Y-2.487 E.01641 G1 X-73.698 Y8.517 E.47854 G1 X-73.698 Y9.051 E.01641 G1 X-84.702 Y-1.953 E.47854 G1 X-84.702 Y-1.552 E.01233 G1 X-84.835 Y-1.552 E.00408 G1 X-73.698 Y9.585 E.48431 G1 X-73.698 Y10.118 E.01641 G1 X-85.351 Y-1.534 E.50676 G1 X-85.884 Y-1.534 E.01641 G1 X-73.698 Y10.652 E.52997 G1 X-73.698 Y11.186 E.01641 G1 X-86.418 Y-1.534 E.55318 G1 X-86.952 Y-1.534 E.01641 G1 X-73.698 Y11.719 E.57639 G1 X-73.698 Y12.253 E.01641 G1 X-87.486 Y-1.534 E.5996 G1 X-88.019 Y-1.534 E.01641 G1 X-73.698 Y12.787 E.62281 G1 X-73.698 Y13.32 E.01641 G1 X-88.553 Y-1.534 E.64602 G1 X-89.087 Y-1.534 E.01641 G1 X-73.698 Y13.854 E.66923 G1 X-73.698 Y14.388 E.01641 G1 X-89.62 Y-1.534 E.69244 G1 X-89.691 Y-1.534 E.00217 G1 X-89.887 Y-1.339 E.00851 G1 X-90.53 Y-1.982 E.02799 G2 X-90.556 Y-1.937 I.051 J.059 E.00164 G1 X-73.698 Y14.922 E.73315 G1 X-73.698 Y15.455 E.01641 G1 X-90.684 Y-1.531 E.73871 G1 X-90.684 Y-.997 E.01641 G1 X-73.698 Y15.989 E.73871 G1 X-73.698 Y16.523 E.01641 G1 X-90.684 Y-.464 E.73871 G1 X-90.684 Y.07 E.01641 G1 X-73.698 Y17.056 E.73871 G1 X-73.698 Y17.59 E.01641 G1 X-90.684 Y.604 E.73871 G1 X-90.684 Y1.137 E.01641 G1 X-73.698 Y18.124 E.73871 G1 X-73.698 Y18.657 E.01641 G1 X-90.684 Y1.671 E.73871 G1 X-90.684 Y2.205 E.01641 G1 X-73.698 Y19.191 E.73871 G1 X-73.698 Y19.725 E.01641 G1 X-90.684 Y2.738 E.73871 G1 X-90.684 Y3.272 E.01641 G1 X-73.698 Y20.258 E.73871 G1 X-73.698 Y20.792 E.01641 G1 X-90.684 Y3.806 E.73871 G1 X-90.684 Y4.34 E.01641 G1 X-73.698 Y21.326 E.73871 G1 X-73.698 Y21.859 E.01641 G1 X-90.684 Y4.873 E.73871 G1 X-90.684 Y5.407 E.01641 G1 X-73.698 Y22.393 E.73871 G1 X-73.698 Y22.927 E.01641 G1 X-90.684 Y5.941 E.73871 G1 X-90.684 Y6.474 E.01641 G1 X-73.698 Y23.461 E.73871 G1 X-73.698 Y23.994 E.01641 G1 X-90.684 Y7.008 E.73871 G1 X-90.684 Y7.542 E.01641 G1 X-73.698 Y24.528 E.73871 G1 X-73.698 Y25.062 E.01641 G1 X-90.684 Y8.075 E.73871 G1 X-90.684 Y8.609 E.01641 G1 X-73.698 Y25.595 E.73871 G1 X-73.698 Y26.129 E.01641 G1 X-90.684 Y9.143 E.73871 G1 X-90.684 Y9.676 E.01641 G1 X-73.698 Y26.663 E.73871 G1 X-73.698 Y27.196 E.01641 G1 X-90.684 Y10.21 E.73871 G1 X-90.684 Y10.744 E.01641 G1 X-73.698 Y27.73 E.73871 G1 X-73.698 Y28.264 E.01641 G1 X-90.684 Y11.277 E.73871 G1 X-90.684 Y11.811 E.01641 G1 X-73.698 Y28.797 E.73871 G1 X-73.698 Y29.331 E.01641 G1 X-90.684 Y12.345 E.73871 G1 X-90.684 Y12.879 E.01641 G1 X-73.698 Y29.865 E.73871 G1 X-73.698 Y30.399 E.01641 G1 X-90.702 Y13.395 E.73947 G1 X-90.702 Y13.928 E.01641 G1 X-73.698 Y30.932 E.73947 G1 X-73.698 Y31.466 E.01641 G1 X-84.684 Y20.48 E.47778 G1 X-84.684 Y21.013 E.01641 G1 X-55.946 Y49.752 E1.24981 G1 X-56.479 Y49.752 E.01641 G1 X-84.684 Y21.547 E1.2266 G1 X-84.684 Y22.081 E.01641 G1 X-57.013 Y49.752 E1.20339 M73 P27 R80 G1 X-57.547 Y49.752 E.01641 G1 X-84.684 Y22.614 E1.18018 G1 X-84.684 Y23.148 E.01641 G1 X-58.081 Y49.752 E1.15697 G1 X-58.614 Y49.752 E.01641 G1 X-84.684 Y23.682 E1.13376 G1 X-84.684 Y24.215 E.01641 G1 X-59.148 Y49.752 E1.11055 G1 X-59.682 Y49.752 E.01641 G1 X-84.684 Y24.749 E1.08734 G1 X-84.684 Y25.283 E.01641 G1 X-60.215 Y49.752 E1.06413 G1 X-60.749 Y49.752 E.01641 G1 X-84.701 Y25.8 E1.04163 G2 X-84.702 Y26.248 I2.22 J.23 E.0138 G1 X-84.769 Y26.266 E.00213 G1 X-61.283 Y49.752 E1.02139 G1 X-61.816 Y49.752 E.01641 G1 X-85.303 Y26.266 E1.02139 G1 X-85.836 Y26.266 E.01641 G1 X-62.35 Y49.752 E1.02139 G1 X-62.884 Y49.752 E.01641 G1 X-86.37 Y26.266 E1.02139 G1 X-86.904 Y26.266 E.01641 G1 X-72.183 Y40.987 E.6402 G2 X-72.711 Y40.992 I-.243 J1.981 E.01629 G1 X-87.437 Y26.266 E.64045 G1 X-87.971 Y26.266 E.01641 G1 X-73.155 Y41.082 E.64435 G2 X-73.532 Y41.238 I.405 J1.512 E.0126 G1 X-88.505 Y26.266 E.65114 G1 X-89.038 Y26.266 E.01641 G1 X-73.862 Y41.442 E.66001 G2 X-74.138 Y41.7 I1.411 J1.787 E.01162 G1 X-89.572 Y26.266 E.67122 G1 X-89.621 Y26.266 E.0015 G1 X-89.817 Y26.461 E.00851 G1 X-90.461 Y25.818 E.02799 G2 X-90.505 Y25.867 I.236 J.257 E.00203 G1 X-74.382 Y41.989 E.70116 G2 X-74.577 Y42.329 I1.19 J.908 E.01206 G1 X-90.684 Y26.221 E.70051 G1 X-90.684 Y26.754 E.01641 G1 X-74.722 Y42.717 E.6942 G2 X-74.792 Y43.181 I1.727 J.497 E.01446 G1 X-90.684 Y27.288 E.69116 G1 X-90.684 Y27.822 E.01641 G1 X-74.523 Y43.983 E.70285 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-75.937 Y42.569 ;WIPE_END G1 X-70.326 Y42.843 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-63.417 Y49.752 E.30045 G1 X-63.951 Y49.752 E.01641 G1 X-70.117 Y43.586 E.26813 G3 X-70.212 Y44.025 I-2.803 J-.38 E.01381 G1 X-64.485 Y49.752 E.24907 G1 X-65.019 Y49.752 E.01641 G1 X-70.368 Y44.402 E.23265 G3 X-70.572 Y44.732 I-1.355 J-.61 E.01196 G1 X-65.552 Y49.752 E.21831 G1 X-66.086 Y49.752 E.01641 G1 X-70.824 Y45.014 E.20605 G3 X-71.119 Y45.252 I-1.052 J-1.003 E.0117 G1 X-66.62 Y49.752 E.19569 G1 X-67.153 Y49.752 E.01641 G1 X-71.459 Y45.447 E.18723 G3 X-71.847 Y45.592 I-1.468 J-3.337 E.01276 G1 X-67.687 Y49.752 E.18092 G1 X-68.221 Y49.752 E.01641 G1 X-72.311 Y45.662 E.17788 G3 X-72.88 Y45.626 I-.139 J-2.356 E.01758 G1 X-68.754 Y49.752 E.17942 G1 X-69.288 Y49.752 E.01641 G1 X-90.684 Y28.356 E.9305 G1 X-90.684 Y28.889 E.01641 G1 X-69.822 Y49.752 E.90729 G1 X-70.355 Y49.752 E.01641 G1 X-90.684 Y29.423 E.88408 G1 X-90.684 Y29.957 E.01641 G1 X-70.889 Y49.752 E.86088 G1 X-71.423 Y49.752 E.01641 G1 X-90.684 Y30.49 E.83767 G1 X-90.684 Y31.024 E.01641 G1 X-71.956 Y49.752 E.81446 G1 X-72.49 Y49.752 E.01641 G1 X-90.684 Y31.558 E.79125 G1 X-90.684 Y32.091 E.01641 G1 X-73.024 Y49.752 E.76804 G1 X-73.558 Y49.752 E.01641 M73 P27 R79 G1 X-90.684 Y32.625 E.74483 G1 X-90.684 Y33.159 E.01641 G1 X-74.091 Y49.752 E.72162 G1 X-74.625 Y49.752 E.01641 G1 X-90.684 Y33.692 E.69841 G1 X-90.684 Y34.226 E.01641 G1 X-75.159 Y49.752 E.6752 G1 X-75.692 Y49.752 E.01641 G1 X-90.684 Y34.76 E.65199 G1 X-90.684 Y35.293 E.01641 G1 X-76.226 Y49.752 E.62878 G1 X-76.76 Y49.752 E.01641 G1 X-90.684 Y35.827 E.60557 G1 X-90.684 Y36.361 E.01641 G1 X-77.293 Y49.752 E.58236 G1 X-77.827 Y49.752 E.01641 G1 X-90.684 Y36.895 E.55915 G1 X-90.684 Y37.428 E.01641 G1 X-78.361 Y49.752 E.53594 G1 X-78.894 Y49.752 E.01641 G1 X-90.684 Y37.962 E.51273 G1 X-90.684 Y38.496 E.01641 G1 X-79.428 Y49.752 E.48952 G1 X-79.962 Y49.752 E.01641 G1 X-90.684 Y39.029 E.46631 G1 X-90.684 Y39.563 E.01641 G1 X-80.495 Y49.752 E.4431 G1 X-81.029 Y49.752 E.01641 G1 X-90.684 Y40.097 E.41989 G1 X-90.684 Y40.63 E.01641 G1 X-85.757 Y45.558 E.21429 G3 X-83.508 Y47.807 I-1.135 J3.384 E.10137 G1 X-81.563 Y49.752 E.08459 G1 X-82.097 Y49.752 E.01641 G1 X-83.332 Y48.517 E.05372 G1 X-83.304 Y49.078 E.01728 G1 X-82.461 Y49.922 E.03669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.251 Y45.598 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.684 Y41.164 E.19282 G1 X-90.684 Y41.698 E.01641 G1 X-87.028 Y45.354 E.15902 G2 X-87.517 Y45.398 I-.077 J1.881 E.01516 G1 X-90.872 Y42.044 E.14587 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-89.457 Y43.458 ;WIPE_END G1 X-88.118 Y35.944 Z2.6 F30000 G1 X-85.26 Y19.904 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-90.702 Y14.462 E.23666 G1 X-90.702 Y14.996 E.01641 G1 X-85.963 Y19.734 E.20608 G1 X-86.497 Y19.734 E.01641 G1 X-90.702 Y15.529 E.18287 G1 X-90.702 Y16.063 E.01641 G1 X-87.031 Y19.734 E.15966 G1 X-87.443 Y19.734 E.01269 G1 X-87.461 Y19.752 E.00076 G1 X-87.547 Y19.752 E.00265 G1 X-90.872 Y16.427 E.14459 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.957 Y-23.634 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.546031 G1 F15000 G1 X-20.957 Y-24.493 E.03521 G1 X-21.816 Y-24.493 E.03521 G1 X-20.985 Y-23.662 E.04816 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-21.816 Y-24.493 G1 X-20.991 Y-24.493 ;WIPE_END G1 X-14.554 Y-28.594 Z2.6 F30000 G1 X6.16 Y-41.79 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z2.6 F30000 G1 X74.198 Y15.448 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z2.6 F30000 G1 X90.96 Y7.29 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z2.6 F30000 G1 X75.04 Y16.29 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X75.23 Y15.237 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.03836 G2 X76.118 Y14.326 I-.879 J-.236 E.03316 G3 X75.059 Y13.343 I1.787 J-2.987 E.04827 G3 X75.499 Y11.705 I1.859 J-.379 E.05832 G1 X76.387 Y10.936 E.03895 G1 X76.387 Y9.524 E.04686 G1 X76.118 Y9.084 E.01709 G1 X75.321 Y8.429 E.03423 G3 X74.986 Y7.763 I.756 J-.797 E.02523 G1 X74.313 Y7.763 E.02233 G1 X74.313 Y8.718 E.03168 G1 X77.223 Y7 F30000 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X91.178 Y7 E.1651 G1 X91.226 Y7.024 E.00064 ;WIDTH:0.260421 G1 X91.274 Y7.048 E.00096 ;WIDTH:0.308755 G1 X91.323 Y7.073 E.00117 ;WIDTH:0.346671 G1 X91.336 Y7.086 E.00048 ;WIDTH:0.374169 G1 X91.35 Y7.1 E.00052 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.24737 G1 X91.336 Y15.914 E.00055 ;WIDTH:0.346671 G1 X91.323 Y15.928 E.00048 ;WIDTH:0.308756 G1 X91.274 Y15.952 E.00117 ;WIDTH:0.260422 G1 X91.226 Y15.976 E.00096 ;WIDTH:0.212089 G1 X91.178 Y16 E.00074 ;WIDTH:0.187921 G1 X77.223 Y16 E.16489 G1 X74.15 Y15.651 F30000 ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X69.268 Y21.519 Z2.6 F30000 G1 X55.548 Y38.01 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z2.6 F30000 G1 Z2.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z2.6 F30000 G1 X33.195 Y38.745 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z2.6 F30000 G1 X3.102 Y40.648 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z2.6 F30000 G1 X33.602 Y39.152 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z2.6 F30000 G1 X2.695 Y41.055 Z2.6 G1 Z2.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 ;LAYER_CHANGE ;Z:2.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z2.8 I1.128 J-.456 P1 F30000 G1 X-16.24 Y-6.41 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-19.244 Y2.614 Z2.8 F30000 G1 X-31.398 Y31.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.032 Y25.231 Z2.8 F30000 G1 X-64.59 Y-6.456 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.609 Y-6.68 E.00747 G3 X-63.761 Y-8.389 I2.151 J.002 E.06556 G3 X-62.621 Y-8.823 I1.323 J1.762 E.04101 G3 X-64.591 Y-6.398 I.163 J2.145 E.33241 G1 X-64.59 Y-6.416 E.00058 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.183 Y-6.482 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.202 Y-6.68 E.00659 G3 X-63.323 Y-8.192 I1.744 J.002 E.06078 G3 X-62.594 Y-8.417 I.851 J1.468 E.02551 G3 X-64.186 Y-6.442 I.137 J1.738 E.26926 G1 X-63.749 Y-6.507 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.756 Y-6.508 E.00021 G3 X-62.951 Y-7.891 I1.298 J-.17 E.05287 G3 X-62.566 Y-7.983 I.523 J1.336 E.01222 G3 X-63.667 Y-6.176 I.108 J1.304 E.17699 G1 X-63.739 Y-6.468 E.00926 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.756 Y-6.508 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.717 Y-7.958 ;WIPE_END G1 X-55.117 Y-7.256 Z2.8 F30000 G1 X-40.453 Y-5.902 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.513 Y-5.759 E.00516 G3 X-43.761 Y-8.389 I-1.945 J-.92 E.2583 G3 X-42.621 Y-8.823 I1.323 J1.762 E.04101 G3 X-40.379 Y-6.125 I.163 J2.145 E.13608 G1 X-40.44 Y-5.94 E.00647 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.832 Y-6.047 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.879 Y-5.939 E.00392 G3 X-43.323 Y-8.192 I-1.579 J-.74 E.21721 G3 X-42.594 Y-8.417 I.851 J1.468 E.02551 G3 X-40.773 Y-6.231 I.137 J1.738 E.11042 G1 X-40.819 Y-6.085 E.00506 G1 X-41.237 Y-6.201 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.269 Y-6.131 E.00235 G3 X-42.951 Y-7.891 I-1.189 J-.547 E.15662 G3 X-42.566 Y-7.983 I.523 J1.336 E.01222 G3 X-41.193 Y-6.343 I.108 J1.304 E.07691 G1 X-41.225 Y-6.239 E.00335 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.269 Y-6.131 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.841 Y-5.44 ;WIPE_END G1 X-38.281 Y.68 Z2.8 F30000 G1 X-20.002 Y25.21 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.231 Y29.652 Z2.8 F30000 G1 X-33.195 Y45.337 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.275 Y45.312 E.00279 G3 X-33.761 Y41.611 I.818 J-1.99 E.14991 G3 X-32.621 Y41.177 I1.323 J1.762 E.04102 G3 X-33.008 Y45.402 I.163 J2.145 E.24808 G1 X-33.157 Y45.35 E.00523 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.064 Y44.952 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.12 Y44.937 E.00191 G3 X-33.323 Y41.808 I.662 J-1.614 E.12926 G3 X-32.594 Y41.583 I.851 J1.468 E.02551 G3 X-32.903 Y45.01 I.137 J1.739 E.20131 G1 X-33.026 Y44.965 E.00435 G1 X-32.923 Y44.538 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.533 E.00093 G3 X-32.951 Y42.109 I.495 J-1.212 E.09521 G3 X-32.566 Y42.017 I.523 J1.336 E.01222 G3 X-32.621 Y44.62 I.108 J1.304 E.13469 G1 X-32.884 Y44.549 E.00837 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.698 Y42.938 ;WIPE_END G1 X-41.317 Y43.402 Z2.8 F30000 G1 X-73.188 Y45.34 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.275 Y45.313 E.00305 G3 X-73.761 Y41.611 I.818 J-1.99 E.14994 G3 X-72.621 Y41.177 I1.323 J1.762 E.04102 G3 X-73.008 Y45.403 I.164 J2.146 E.24816 G1 X-73.15 Y45.353 E.00498 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.057 Y44.954 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.119 Y44.935 E.00216 G3 X-73.323 Y41.808 I.661 J-1.614 E.12919 G3 X-72.594 Y41.583 I.851 J1.468 E.02551 G3 X-72.902 Y45.008 I.137 J1.738 E.20116 G1 X-73.019 Y44.967 E.0041 G1 X-72.915 Y44.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.533 E.00117 G3 X-72.951 Y42.109 I.495 J-1.212 E.09521 G3 X-72.566 Y42.017 I.523 J1.336 E.01222 G3 X-72.621 Y44.62 I.108 J1.304 E.1347 G1 X-72.877 Y44.551 E.00814 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.701 Y42.945 ;WIPE_END G1 X-77.863 Y36.547 Z2.8 F30000 G1 X-88.66 Y19.948 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-79.786 Y17.485 Z2.8 F30000 G1 X-18.794 Y-11.948 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-18.044 Y-7.252 I2.847 J1.953 E.174 G1 X-20.002 Y-7.252 E.06494 G1 X-20.002 Y-1.748 E.18258 G1 X-15.398 Y-1.748 E.15273 G1 X-15.398 Y-6.595 E.1608 G2 X-14.002 Y-7.156 I-.443 J-3.121 E.05038 G1 X-14.002 Y49.948 E1.89424 G1 X-14.624 Y49.948 E.02063 G2 X-21.276 Y49.948 I-3.326 J-.94 E.42337 G1 X-83.624 Y49.948 E2.0682 G2 X-90.276 Y49.948 I-3.326 J-.939 E.42323 G1 X-90.898 Y49.948 E.02063 G1 X-90.898 Y-7.156 E1.89424 G2 X-89.502 Y-6.595 I1.839 J-2.561 E.05038 G1 X-89.502 Y-1.748 E.1608 G1 X-84.898 Y-1.748 E.15273 G1 X-84.898 Y-7.252 E.18258 G1 X-86.856 Y-7.252 E.06494 G2 X-86.106 Y-11.948 I-2.097 J-2.743 E.174 G1 X-84.398 Y-11.948 E.05666 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-18.834 Y-11.948 E.05533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.928 Y-12.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-18.367 Y-11.855 E.02208 G2 X-16.715 Y-7.049 I2.433 J1.85 E.19898 G1 X-16.749 Y-6.845 E.00687 G1 X-19.595 Y-6.845 E.09441 G1 X-19.595 Y-2.155 E.15558 G1 X-15.805 Y-2.155 E.12572 G1 X-15.805 Y-6.963 E.15949 G2 X-14.095 Y-7.583 I-.161 J-3.109 E.06121 G1 X-13.595 Y-8.022 E.02208 G1 X-13.595 Y50.355 E1.93647 G1 X-15.229 Y50.355 E.0542 G2 X-20.671 Y50.355 I-2.721 J-1.36 E.41051 G1 X-84.229 Y50.355 E2.10832 G2 X-89.671 Y50.355 I-2.721 J-1.357 E.4102 G1 X-91.305 Y50.355 E.0542 G1 X-91.305 Y-8.022 E1.93647 G1 X-90.805 Y-7.583 E.02208 G2 X-89.095 Y-6.963 I1.87 J-2.489 E.06121 G1 X-89.095 Y-2.155 E.15949 G1 X-85.305 Y-2.155 E.12572 G1 X-85.305 Y-6.845 E.15558 G1 X-88.151 Y-6.845 E.09442 G1 X-88.185 Y-7.049 E.00687 G2 X-86.533 Y-11.855 I-.781 J-2.955 E.19898 G1 X-86.972 Y-12.355 E.02208 G1 X-84.805 Y-12.355 E.07189 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-17.968 Y-12.355 E.07056 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-18.367 Y-11.855 G1 X-18.588 Y-11.523 G1 X-18.764 Y-11.166 G1 X-18.893 Y-10.788 G1 X-18.925 Y-10.627 ;WIPE_END G1 X-15.276 Y-12.515 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-17.255 Y-12.261 I-.682 J2.517 E.44054 G3 X-16.225 Y-12.592 I1.28 J2.209 E.03352 G3 X-15.315 Y-12.525 I.266 J2.594 E.02818 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.951 Y-12.412 G1 X-14.645 Y-12.261 G1 X-14.361 Y-12.071 G1 X-14.104 Y-11.846 G1 X-13.879 Y-11.589 G1 X-13.738 Y-11.379 ;WIPE_END G1 X-21.354 Y-10.874 Z2.8 F30000 G1 X-88.66 Y-6.41 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-90.257 Y-7.737 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-90.255 Y-12.261 I1.298 J-2.262 E.16826 G3 X-89.225 Y-12.592 I1.28 J2.209 E.03352 G3 X-90.222 Y-7.717 I.266 J2.594 E.30047 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.539 Y-7.929 G1 X-90.796 Y-8.154 G1 X-91.021 Y-8.411 G1 X-91.211 Y-8.695 G1 X-91.362 Y-9.001 G1 X-91.443 Y-9.24 ;WIPE_END G1 X-83.82 Y-9.617 Z2.8 F30000 G1 X-19.66 Y-12.79 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-16.055 Y50.79 E.08896 G2 X-19.845 Y50.79 I-1.895 J-1.792 E.37321 G1 X-85.055 Y50.79 E2.00373 G2 X-88.845 Y50.79 I-1.895 J-1.789 E.37273 G1 X-91.74 Y50.79 E.08896 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-17.692 Y-12.259 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.141342 G1 F12000 G1 X-17.554 Y-12.38 E.00147 ;WIDTH:0.163553 G1 X-17.416 Y-12.501 E.00181 ;WIDTH:0.17539 G1 X-17.206 Y-12.558 E.00235 G1 X-14.656 Y-12.572 F30000 ;WIDTH:0.41803 G1 F12000 G1 X-13.377 Y-12.138 E.04129 G1 X-13.812 Y-12.572 F30000 ;WIDTH:0.401729 G1 F12000 G1 X-13.377 Y-11.294 E.03949 G1 X-13.392 Y-8.744 F30000 ;WIDTH:0.175391 G1 F12000 G1 X-13.449 Y-8.534 E.00235 ;WIDTH:0.163549 G1 X-13.57 Y-8.396 E.00181 ;WIDTH:0.14134 G1 X-13.691 Y-8.258 E.00147 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-13.57 Y-8.396 ;WIPE_END G1 X-18.733 Y-7.574 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-18.797 Y-7.537 E.00204 G1 X-18.732 Y-7.503 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-18.797 Y-7.537 G1 X-18.733 Y-7.574 ;WIPE_END G1 X-14.947 Y-2.211 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537302 G1 F15000 G3 X-14.656 Y-2.439 I.509 J.349 E.01512 G1 X-14.453 Y-2.375 E.0086 G1 X-14.453 Y-6.394 E.1619 G1 X-14.947 Y-6.244 E.02081 G1 X-14.947 Y-2.251 E.16087 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.453 Y19.744 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.542627 G1 F15000 G1 X-14.471 Y18.835 E.03702 G1 X-15.144 Y19.508 E.03874 G1 X-14.947 Y19.621 E.00922 G1 X-14.947 Y25.519 E.24019 G3 X-14.691 Y25.357 I.333 J.244 E.01262 G1 X-14.453 Y25.485 E.01101 G1 X-14.453 Y19.784 E.23212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.905 Y45.758 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-15.387 Y46.141 E.01981 G1 X-14.906 Y46.649 E.02148 G1 X-14.713 Y46.934 E.01059 G1 X-14.394 Y46.86 E.01006 G1 X-14.394 Y44.247 E.08029 G1 X-15.877 Y45.73 E.06443 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.292 Y45.701 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.452784 G1 F15000 G1 X-14.788 Y46.187 E.02338 G1 X-14.788 Y45.197 E.03306 G1 X-15.264 Y45.673 E.0225 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.453 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.427291 G1 F12000 G1 X-14.398 Y47.515 E.00768 ;WIDTH:0.401919 G3 X-14.373 Y47.659 I-2.181 J.447 E.00429 ;WIDTH:0.358151 G1 X-14.353 Y47.779 E.00311 ;WIDTH:0.318646 G1 X-14.334 Y47.899 E.00272 ;WIDTH:0.279142 G1 X-14.314 Y48.018 E.00233 ;WIDTH:0.257538 G1 X-14.312 Y48.032 E.00025 ;WIDTH:0.232125 G1 X-14.288 Y48.272 E.00371 ;WIDTH:0.184997 G1 X-14.265 Y48.511 E.00278 ;WIDTH:0.144792 G3 X-14.249 Y48.997 I-7.384 J.489 E.00404 G1 X-14.264 Y49.481 E.00402 ;WIDTH:0.178483 G1 X-14.29 Y49.744 E.00292 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.264 Y49.481 ;WIPE_END G1 X-21.791 Y49.021 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.410988 G1 F15000 G1 X-22.38 Y49.56 E.02396 G1 X-21.73 Y49.56 E.01951 G1 X-21.787 Y49.06 E.01509 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.217 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.42029 G1 F15000 G1 X-21.27 Y47.974 E.08471 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-22.684 Y49.388 ;WIPE_END G1 X-16.48 Y45.852 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-14.198 Y43.571 E.09923 G1 X-14.198 Y43.464 E.00327 G1 X-14.216 Y43.447 E.00076 G1 X-14.216 Y43.054 E.01206 G1 X-16.729 Y45.567 E.10929 G2 X-17.141 Y45.446 I-.666 J1.507 E.01326 G1 X-14.216 Y42.521 E.12724 G1 X-14.216 Y41.987 E.01641 G1 X-17.601 Y45.372 E.14721 G2 X-18.123 Y45.361 I-.305 J1.978 E.01611 G1 X-14.216 Y41.453 E.16992 G1 X-14.216 Y40.92 E.01641 G1 X-18.976 Y45.68 E.20704 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.751 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-21.216 Y47.387 E.11024 G3 X-19.563 Y45.734 I3.147 J1.494 E.0733 G1 X-14.216 Y40.386 E.23256 G1 X-14.216 Y39.852 E.01641 G1 X-24.115 Y49.752 E.43051 G1 X-24.649 Y49.752 E.01641 G1 X-14.216 Y39.319 E.45372 G1 X-14.216 Y38.785 E.01641 G1 X-25.183 Y49.752 E.47693 G1 X-25.716 Y49.752 E.01641 G1 X-14.216 Y38.251 E.50014 G1 X-14.216 Y37.718 E.01641 G1 X-26.25 Y49.752 E.52335 G1 X-26.784 Y49.752 E.01641 G1 X-14.216 Y37.184 E.54656 G1 X-14.216 Y36.65 E.01641 G1 X-27.317 Y49.752 E.56977 G1 X-27.851 Y49.752 E.01641 G1 X-14.216 Y36.117 E.59298 G1 X-14.216 Y35.583 E.01641 G1 X-28.385 Y49.752 E.61619 G1 X-28.918 Y49.752 E.01641 G1 X-14.216 Y35.049 E.6394 G1 X-14.216 Y34.516 E.01641 G1 X-29.452 Y49.752 E.6626 G1 X-29.986 Y49.752 E.01641 G1 X-14.216 Y33.982 E.68581 G1 X-14.216 Y33.448 E.01641 G1 X-30.519 Y49.752 E.70902 G1 X-31.053 Y49.752 E.01641 G1 X-14.216 Y32.914 E.73223 G1 X-14.216 Y32.381 E.01641 G1 X-31.587 Y49.752 E.75544 G1 X-32.12 Y49.752 E.01641 G1 X-14.216 Y31.847 E.77865 G1 X-14.216 Y31.313 E.01641 G1 X-32.654 Y49.752 E.80186 G1 X-33.188 Y49.752 E.01641 G1 X-14.216 Y30.78 E.82507 G1 X-14.216 Y30.246 E.01641 G1 X-33.721 Y49.752 E.84828 G1 X-34.255 Y49.752 E.01641 G1 X-14.216 Y29.712 E.87148 G1 X-14.216 Y29.179 E.01641 G1 X-34.789 Y49.752 E.89469 G1 X-35.322 Y49.752 E.01641 G1 X-14.216 Y28.645 E.9179 G1 X-14.216 Y28.111 E.01641 G1 X-30.255 Y44.15 E.69751 G3 X-31.62 Y45.515 I-2.164 J-.799 E.06125 G1 X-35.856 Y49.752 E.18424 G1 X-36.39 Y49.752 E.01641 G1 X-32.299 Y45.661 E.17791 G3 X-32.811 Y45.64 I-.151 J-2.572 E.0158 G1 X-36.924 Y49.752 E.17883 G1 X-37.457 Y49.752 E.01641 G1 X-33.236 Y45.53 E.18358 G3 X-33.605 Y45.366 I.44 J-1.484 E.01246 G1 X-37.991 Y49.752 E.19074 G1 X-38.525 Y49.752 E.01641 G1 X-33.922 Y45.149 E.20016 G3 X-34.195 Y44.888 I.855 J-1.167 E.01164 G1 X-39.058 Y49.752 E.21151 G1 X-39.592 Y49.752 E.01641 G1 X-34.426 Y44.586 E.22468 G3 X-34.612 Y44.239 I1.224 J-.883 E.01215 G1 X-40.126 Y49.752 E.23976 G1 X-40.659 Y49.752 E.01641 G1 X-34.74 Y43.832 E.25743 G3 X-34.798 Y43.357 I1.775 J-.46 E.01476 G1 X-41.363 Y49.922 E.28547 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-39.948 Y48.507 ;WIPE_END G1 X-35.027 Y42.674 Z2.8 F30000 G1 X-14.035 Y17.791 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-15.996 Y19.752 E.08529 G1 X-16.53 Y19.752 E.01641 G1 X-14.216 Y17.438 E.10064 G1 X-14.216 Y16.904 E.01641 G1 X-17.063 Y19.752 E.12385 G1 X-17.597 Y19.752 E.01641 G1 X-14.216 Y16.37 E.14706 G1 X-14.216 Y15.837 E.01641 G1 X-18.131 Y19.752 E.17027 G1 X-18.665 Y19.752 E.01641 G1 X-14.216 Y15.303 E.19348 G1 X-14.216 Y14.769 E.01641 G1 X-19.368 Y19.922 E.22406 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-17.954 Y18.507 ;WIPE_END G1 X-14.885 Y25.496 Z2.8 F30000 G1 X-14.046 Y27.408 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-30.109 Y43.471 E.69856 G2 X-30.13 Y42.959 I-2.572 J-.151 E.0158 G1 X-14.216 Y27.044 E.6921 G1 X-14.216 Y26.51 E.01641 G1 X-30.24 Y42.534 E.69685 G2 X-30.404 Y42.165 I-1.484 J.44 E.01246 G1 X-14.216 Y25.977 E.70401 G1 X-14.216 Y25.923 E.00166 G1 X-14.618 Y25.882 E.01244 G1 X-14.637 Y25.864 E.00081 G1 X-30.621 Y41.848 E.69513 G2 X-30.882 Y41.575 I-1.167 J.855 E.01164 G1 X-15.572 Y26.266 E.66579 G1 X-16.106 Y26.266 E.01641 G1 X-31.184 Y41.344 E.65575 G2 X-31.531 Y41.158 I-.883 J1.223 E.01215 G1 X-16.639 Y26.266 E.64763 G1 X-17.173 Y26.266 E.01641 G1 X-31.938 Y41.03 E.64209 G2 X-32.413 Y40.972 I-.46 J1.775 E.01476 G1 X-17.707 Y26.266 E.63954 G1 X-18.24 Y26.266 E.01641 G1 X-33.017 Y41.042 E.6426 G2 X-34.729 Y42.754 I.552 J2.264 E.07831 G1 X-41.727 Y49.752 E.30431 G1 X-42.26 Y49.752 E.01641 G1 X-18.774 Y26.266 E1.02138 G1 X-19.308 Y26.266 E.01641 G1 X-42.794 Y49.752 E1.02138 G1 X-43.328 Y49.752 E.01641 G1 X-19.824 Y26.248 E1.02214 G1 X-20.198 Y26.248 E.01151 G1 X-20.198 Y26.089 E.00491 G1 X-43.861 Y49.752 E1.02908 G1 X-44.395 Y49.752 E.01641 G1 X-20.198 Y25.555 E1.05229 G1 X-20.198 Y25.021 E.01641 G1 X-44.929 Y49.752 E1.07549 G1 X-45.462 Y49.752 E.01641 G1 X-20.198 Y24.488 E1.0987 G1 X-20.198 Y23.954 E.01641 G1 X-45.996 Y49.752 E1.12191 G1 X-46.53 Y49.752 E.01641 G1 X-20.198 Y23.42 E1.14512 G1 X-20.198 Y22.887 E.01641 G1 X-47.063 Y49.752 E1.16833 G1 X-47.597 Y49.752 E.01641 G1 X-20.198 Y22.353 E1.19154 G1 X-20.198 Y21.819 E.01641 G1 X-48.131 Y49.752 E1.21475 G1 X-48.665 Y49.752 E.01641 G1 X-20.198 Y21.285 E1.23796 G1 X-20.198 Y20.752 E.01641 G1 X-31.202 Y31.756 E.47853 G1 X-31.202 Y32.248 E.01515 G1 X-31.694 Y32.248 E.01515 G1 X-49.198 Y49.752 E.76121 G1 X-49.732 Y49.752 E.01641 G1 X-32.228 Y32.248 E.76121 G1 X-32.762 Y32.248 E.01641 G1 X-50.266 Y49.752 E.76121 G1 X-50.799 Y49.752 E.01641 G1 X-33.295 Y32.248 E.76121 G1 X-33.829 Y32.248 E.01641 G1 X-51.333 Y49.752 E.76121 G1 X-51.867 Y49.752 E.01641 G1 X-34.363 Y32.248 E.76121 G1 X-34.897 Y32.248 E.01641 G1 X-52.4 Y49.752 E.76121 G1 X-52.934 Y49.752 E.01641 G1 X-35.43 Y32.248 E.76121 G1 X-35.964 Y32.248 E.01641 G1 X-53.468 Y49.752 E.76121 G1 X-54.001 Y49.752 E.01641 G1 X-36.498 Y32.248 E.76121 G1 X-37.031 Y32.248 E.01641 G1 X-54.535 Y49.752 E.76121 G1 X-55.069 Y49.752 E.01641 G1 X-37.565 Y32.248 E.76121 G1 X-38.099 Y32.248 E.01641 G1 X-55.602 Y49.752 E.76121 G1 X-56.136 Y49.752 E.01641 G1 X-38.632 Y32.248 E.76121 G1 X-39.166 Y32.248 E.01641 G1 X-56.67 Y49.752 E.76121 G1 X-57.203 Y49.752 E.01641 G1 X-39.7 Y32.248 E.76121 G1 X-40.233 Y32.248 E.01641 G1 X-57.737 Y49.752 E.76121 G1 X-58.271 Y49.752 E.01641 G1 X-40.767 Y32.248 E.76121 G1 X-41.301 Y32.248 E.01641 G1 X-58.804 Y49.752 E.76121 G1 X-59.338 Y49.752 E.01641 G1 X-41.834 Y32.248 E.76121 G1 X-42.368 Y32.248 E.01641 G1 X-59.872 Y49.752 E.76121 G1 X-60.406 Y49.752 E.01641 G1 X-42.902 Y32.248 E.76121 G1 X-43.435 Y32.248 E.01641 G1 X-60.939 Y49.752 E.76121 G1 X-61.473 Y49.752 E.01641 G1 X-43.969 Y32.248 E.76121 G1 X-44.503 Y32.248 E.01641 G1 X-62.007 Y49.752 E.76121 G1 X-62.54 Y49.752 E.01641 G1 X-45.036 Y32.248 E.76121 G1 X-45.57 Y32.248 E.01641 G1 X-63.074 Y49.752 E.76121 G1 X-63.608 Y49.752 E.01641 G1 X-46.104 Y32.248 E.76121 G1 X-46.638 Y32.248 E.01641 G1 X-64.141 Y49.752 E.76121 G1 X-64.675 Y49.752 E.01641 G1 X-47.171 Y32.248 E.76121 G1 X-47.705 Y32.248 E.01641 G1 X-65.209 Y49.752 E.76121 G1 X-65.742 Y49.752 E.01641 G1 X-48.239 Y32.248 E.76121 G1 X-48.772 Y32.248 E.01641 G1 X-66.276 Y49.752 E.76121 G1 X-66.81 Y49.752 E.01641 G1 X-49.306 Y32.248 E.76121 G1 X-49.84 Y32.248 E.01641 G1 X-67.343 Y49.752 E.76121 G1 X-67.877 Y49.752 E.01641 G1 X-50.373 Y32.248 E.76121 G1 X-50.907 Y32.248 E.01641 G1 X-68.411 Y49.752 E.76121 G1 X-68.944 Y49.752 E.01641 G1 X-51.441 Y32.248 E.76121 G1 X-51.974 Y32.248 E.01641 G1 X-69.478 Y49.752 E.76121 G1 X-70.012 Y49.752 E.01641 G1 X-52.508 Y32.248 E.76121 G1 X-53.042 Y32.248 E.01641 G1 X-70.545 Y49.752 E.76121 G1 X-71.079 Y49.752 E.01641 G1 X-53.575 Y32.248 E.76121 G1 X-54.109 Y32.248 E.01641 G1 X-71.613 Y49.752 E.76121 G1 X-72.147 Y49.752 E.01641 G1 X-54.643 Y32.248 E.76121 G1 X-55.176 Y32.248 E.01641 G1 X-72.68 Y49.752 E.76121 G1 X-73.214 Y49.752 E.01641 G1 X-55.71 Y32.248 E.76121 G1 X-56.244 Y32.248 E.01641 G1 X-73.748 Y49.752 E.76121 G1 X-74.281 Y49.752 E.01641 G1 X-56.777 Y32.248 E.76121 G1 X-57.311 Y32.248 E.01641 G1 X-74.815 Y49.752 E.76121 G1 X-75.349 Y49.752 E.01641 G1 X-57.845 Y32.248 E.76121 G1 X-58.379 Y32.248 E.01641 G1 X-70.241 Y44.111 E.51589 G3 X-71.659 Y45.529 I-2.171 J-.753 E.06381 G1 X-75.882 Y49.752 E.18366 G1 X-76.416 Y49.752 E.01641 G1 X-72.327 Y45.663 E.17783 G3 X-72.833 Y45.635 I-.121 J-2.481 E.01562 G1 X-76.95 Y49.752 E.17902 G1 X-77.483 Y49.752 E.01641 G1 X-73.255 Y45.524 E.18387 G3 X-73.622 Y45.357 I.449 J-1.478 E.01243 G1 X-78.017 Y49.752 E.19111 G1 X-78.551 Y49.752 E.01641 G1 X-73.936 Y45.137 E.20069 G3 X-74.207 Y44.874 I.862 J-1.161 E.01164 G1 X-79.084 Y49.752 E.21212 G1 X-79.618 Y49.752 E.01641 G1 X-74.436 Y44.57 E.22536 G3 X-74.621 Y44.221 I1.231 J-.877 E.01217 G1 X-80.152 Y49.752 E.24052 G1 X-80.685 Y49.752 E.01641 G1 X-74.744 Y43.811 E.25838 G3 X-74.8 Y43.333 I1.788 J-.451 E.01484 G1 X-81.389 Y49.922 E.28654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.293 Y43.629 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-58.912 Y32.248 E.49492 G1 X-59.446 Y32.248 E.01641 G1 X-70.135 Y42.937 E.46483 G2 X-70.246 Y42.515 I-1.659 J.213 E.01346 G1 X-59.98 Y32.248 E.44648 G1 X-60.513 Y32.248 E.01641 G1 X-70.413 Y42.148 E.43051 G2 X-70.633 Y41.834 I-3.605 J2.3 E.01178 G1 X-61.047 Y32.248 E.41688 G1 X-61.581 Y32.248 E.01641 G1 X-70.896 Y41.563 E.40509 G2 X-71.2 Y41.334 I-1.023 J1.042 E.01175 G1 X-62.114 Y32.248 E.39513 G1 X-62.648 Y32.248 E.01641 G1 X-71.55 Y41.148 E.3871 G2 X-71.959 Y41.026 I-.669 J1.493 E.01317 G1 X-63.182 Y32.248 E.38173 G1 X-63.715 Y32.248 E.01641 G1 X-72.617 Y41.15 E.38714 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.079 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-73.055 Y41.048 E.39021 G2 X-74.723 Y42.722 I.631 J2.297 E.07602 G1 X-81.753 Y49.752 E.30573 G1 X-82.286 Y49.752 E.01641 G1 X-64.783 Y32.248 E.76121 G1 X-65.316 Y32.248 E.01641 G1 X-82.82 Y49.752 E.76121 G1 X-83.354 Y49.752 E.01641 G1 X-65.85 Y32.248 E.76121 G1 X-66.384 Y32.248 E.01641 G1 X-83.311 Y49.175 E.73612 G2 X-83.322 Y48.653 I-1.989 J-.218 E.01611 G1 X-66.917 Y32.248 E.7134 G1 X-67.451 Y32.248 E.01641 G1 X-83.396 Y48.193 E.69342 G2 X-83.517 Y47.78 I-1.628 J.252 E.01327 G1 X-67.985 Y32.248 E.67546 G1 X-68.518 Y32.248 E.01641 G1 X-83.675 Y47.405 E.65913 G2 X-83.865 Y47.06 I-1.402 J.548 E.01211 G1 X-69.052 Y32.248 E.64417 G1 X-69.586 Y32.248 E.01641 G1 X-84.082 Y46.745 E.63043 G1 X-84.332 Y46.46 E.01163 G1 X-70.12 Y32.248 E.61807 G1 X-70.653 Y32.248 E.01641 G1 X-84.611 Y46.206 E.607 G2 X-84.916 Y45.978 I-1.02 J1.045 E.01176 G1 X-71.187 Y32.248 E.59707 G1 X-71.721 Y32.248 E.01641 G1 X-85.249 Y45.777 E.58834 G2 X-85.613 Y45.607 I-.828 J1.296 E.01238 G1 X-72.254 Y32.248 E.58094 G1 X-72.788 Y32.248 E.01641 G1 X-86.012 Y45.472 E.57509 G1 X-86.457 Y45.384 E.01396 G1 X-73.322 Y32.248 E.57124 G1 X-73.698 Y32.248 E.01158 G1 X-73.698 Y32.091 E.00483 G1 X-86.957 Y45.35 E.5766 G1 X-87.427 Y45.38 E.01447 G1 X-87.545 Y45.404 E.00371 G1 X-73.698 Y31.557 E.60217 G1 X-73.698 Y31.024 E.01641 G1 X-88.278 Y45.604 E.63407 G1 X-88.347 Y45.627 E.00223 G2 X-90.099 Y47.156 I1.492 J3.478 E.07268 G1 X-90.314 Y47.106 E.00679 G1 X-73.698 Y30.49 E.7226 G1 X-73.698 Y29.956 E.01641 M73 P28 R79 G1 X-90.702 Y46.96 E.73946 G1 X-90.702 Y46.426 E.01641 G1 X-73.698 Y29.423 E.73946 G1 X-73.698 Y28.889 E.01641 M73 P28 R78 G1 X-90.702 Y45.893 E.73946 G1 X-90.702 Y45.359 E.01641 G1 X-73.698 Y28.355 E.73946 G1 X-73.698 Y27.821 E.01641 G1 X-90.702 Y44.825 E.73946 G1 X-90.702 Y44.292 E.01641 G1 X-73.698 Y27.288 E.73946 G1 X-73.698 Y26.754 E.01641 G1 X-90.702 Y43.758 E.73946 G1 X-90.702 Y43.224 E.01641 G1 X-73.698 Y26.22 E.73946 G1 X-73.698 Y25.687 E.01641 G1 X-90.702 Y42.69 E.73946 G1 X-90.702 Y42.157 E.01641 G1 X-73.698 Y25.153 E.73946 G1 X-73.698 Y24.619 E.01641 G1 X-90.702 Y41.623 E.73946 G1 X-90.702 Y41.089 E.01641 G1 X-73.698 Y24.086 E.73946 G1 X-73.698 Y23.552 E.01641 G1 X-90.702 Y40.556 E.73946 G1 X-90.702 Y40.022 E.01641 G1 X-73.698 Y23.018 E.73946 G1 X-73.698 Y22.485 E.01641 G1 X-90.702 Y39.488 E.73946 G1 X-90.702 Y38.955 E.01641 G1 X-73.698 Y21.951 E.73946 G1 X-73.698 Y21.417 E.01641 G1 X-90.702 Y38.421 E.73946 G1 X-90.702 Y37.887 E.01641 G1 X-73.698 Y20.884 E.73946 G1 X-73.698 Y20.35 E.01641 G1 X-90.702 Y37.354 E.73946 G1 X-90.702 Y36.82 E.01641 G1 X-73.698 Y19.816 E.73946 G1 X-73.698 Y19.283 E.01641 G1 X-90.702 Y36.286 E.73946 G1 X-90.702 Y35.753 E.01641 G1 X-73.698 Y18.749 E.73946 G1 X-73.698 Y18.215 E.01641 G1 X-90.702 Y35.219 E.73946 G1 X-90.702 Y34.685 E.01641 G1 X-73.698 Y17.682 E.73946 G1 X-73.698 Y17.148 E.01641 G1 X-90.702 Y34.152 E.73946 G1 X-90.702 Y33.618 E.01641 G1 X-73.698 Y16.614 E.73946 G1 X-73.698 Y16.08 E.01641 G1 X-90.702 Y33.084 E.73946 G1 X-90.702 Y32.551 E.01641 G1 X-73.698 Y15.547 E.73946 G1 X-73.698 Y15.013 E.01641 G1 X-90.702 Y32.017 E.73946 G1 X-90.702 Y31.483 E.01641 G1 X-85.467 Y26.248 E.22766 G1 X-86 Y26.248 E.01641 G1 X-90.702 Y30.95 E.20446 G1 X-90.702 Y30.416 E.01641 G1 X-86.534 Y26.248 E.18125 G1 X-87.068 Y26.248 E.01641 G1 X-90.702 Y29.882 E.15804 G1 X-90.702 Y29.348 E.01641 G1 X-87.432 Y26.078 E.14221 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y25.653 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-73.698 Y14.479 E.48591 G1 X-73.698 Y13.946 E.01641 G1 X-84.702 Y24.95 E.47854 G1 X-84.702 Y24.416 E.01641 G1 X-73.698 Y13.412 E.47854 G1 X-73.698 Y12.878 E.01641 G1 X-84.702 Y23.882 E.47854 G1 X-84.702 Y23.348 E.01641 G1 X-73.698 Y12.345 E.47854 G1 X-73.698 Y11.811 E.01641 G1 X-84.702 Y22.815 E.47854 G1 X-84.702 Y22.281 E.01641 G1 X-73.698 Y11.277 E.47854 G1 X-73.698 Y10.744 E.01641 G1 X-84.702 Y21.747 E.47854 G1 X-84.702 Y21.214 E.01641 G1 X-73.698 Y10.21 E.47854 G1 X-73.698 Y9.676 E.01641 G1 X-84.702 Y20.68 E.47854 G1 X-84.702 Y20.146 E.01641 G1 X-73.698 Y9.143 E.47854 G1 X-73.698 Y8.609 E.01641 G1 X-85.011 Y19.922 E.49197 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-83.597 Y18.507 ;WIPE_END G1 X-76.186 Y20.336 Z2.8 F30000 G1 X-31.372 Y31.392 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-20.198 Y20.218 E.48591 G1 X-20.198 Y19.752 E.01434 G1 X-19.732 Y19.752 E.01434 G1 X-14.216 Y14.236 E.23989 G1 X-14.216 Y13.702 E.01641 G1 X-31.202 Y30.688 E.7387 G1 X-31.202 Y30.155 E.01641 G1 X-14.216 Y13.168 E.7387 G1 X-14.216 Y12.635 E.01641 G1 X-31.202 Y29.621 E.7387 G1 X-31.202 Y29.087 E.01641 G1 X-14.216 Y12.101 E.7387 G1 X-14.216 Y11.567 E.01641 G1 X-31.202 Y28.553 E.7387 G1 X-31.202 Y28.02 E.01641 G1 X-14.216 Y11.034 E.7387 G1 X-14.216 Y10.5 E.01641 G1 X-31.202 Y27.486 E.7387 G1 X-31.202 Y26.952 E.01641 G1 X-14.216 Y9.966 E.7387 G1 X-14.216 Y9.432 E.01641 G1 X-31.202 Y26.419 E.7387 G1 X-31.202 Y25.885 E.01641 G1 X-14.216 Y8.899 E.7387 G1 X-14.216 Y8.365 E.01641 G1 X-31.202 Y25.351 E.7387 G1 X-31.202 Y24.818 E.01641 G1 X-14.216 Y7.831 E.7387 G1 X-14.216 Y7.298 E.01641 G1 X-31.202 Y24.284 E.7387 G1 X-31.202 Y23.75 E.01641 G1 X-14.216 Y6.764 E.7387 G1 X-14.216 Y6.23 E.01641 G1 X-31.202 Y23.217 E.7387 G1 X-31.202 Y22.683 E.01641 G1 X-14.216 Y5.697 E.7387 G1 X-14.216 Y5.163 E.01641 G1 X-31.202 Y22.149 E.7387 G1 X-31.202 Y21.616 E.01641 G1 X-14.216 Y4.629 E.7387 G1 X-14.216 Y4.096 E.01641 G1 X-31.202 Y21.082 E.7387 G1 X-31.202 Y20.548 E.01641 G1 X-14.216 Y3.562 E.7387 G1 X-14.216 Y3.028 E.01641 G1 X-31.202 Y20.015 E.7387 G1 X-31.202 Y19.481 E.01641 G1 X-14.216 Y2.495 E.7387 G1 X-14.216 Y1.961 E.01641 G1 X-31.202 Y18.947 E.7387 G1 X-31.202 Y18.414 E.01641 G1 X-14.216 Y1.427 E.7387 G1 X-14.216 Y.894 E.01641 G1 X-31.202 Y17.88 E.7387 G1 X-31.202 Y17.346 E.01641 G1 X-14.216 Y.36 E.7387 G1 X-14.216 Y-.174 E.01641 G1 X-31.202 Y16.812 E.7387 G1 X-31.202 Y16.279 E.01641 G1 X-14.216 Y-.707 E.7387 G1 X-14.216 Y-1.241 E.01641 G1 X-31.202 Y15.745 E.7387 G1 X-31.202 Y15.211 E.01641 G1 X-14.216 Y-1.775 E.7387 G1 X-14.216 Y-1.83 E.0017 G1 X-14.559 Y-1.928 E.01097 G1 X-14.577 Y-1.947 E.00082 G1 X-31.202 Y14.678 E.72297 G1 X-31.202 Y14.144 E.01641 G1 X-15.523 Y-1.534 E.68183 G1 X-16.057 Y-1.534 E.01641 G1 X-31.202 Y13.61 E.65862 G1 X-31.202 Y13.077 E.01641 G1 X-16.591 Y-1.534 E.63541 G1 X-17.124 Y-1.534 E.01641 G1 X-31.202 Y12.543 E.6122 G1 X-31.202 Y12.009 E.01641 G1 X-17.658 Y-1.534 E.58899 G1 X-18.192 Y-1.534 E.01641 G1 X-31.202 Y11.476 E.56578 G1 X-31.202 Y10.942 E.01641 G1 X-18.726 Y-1.534 E.54257 G1 X-19.259 Y-1.534 E.01641 G1 X-31.202 Y10.408 E.51937 G1 X-31.202 Y9.875 E.01641 G1 X-19.775 Y-1.552 E.49692 G1 X-20.198 Y-1.552 E.013 G1 X-20.198 Y-1.663 E.00341 G1 X-31.202 Y9.341 E.47853 G1 X-31.202 Y8.807 E.01641 G1 X-20.198 Y-2.197 E.47853 G1 X-20.198 Y-2.73 E.01641 G1 X-31.202 Y8.274 E.47854 G1 X-31.202 Y7.752 E.01604 G1 X-31.214 Y7.752 E.00037 G1 X-20.198 Y-3.264 E.47906 G1 X-20.198 Y-3.798 E.01641 G1 X-31.748 Y7.752 E.50227 G1 X-32.281 Y7.752 E.01641 G1 X-20.198 Y-4.331 E.52548 G1 X-20.198 Y-4.865 E.01641 G1 X-32.815 Y7.752 E.54868 G1 X-33.349 Y7.752 E.01641 G1 X-20.198 Y-5.399 E.57189 G1 X-20.198 Y-5.932 E.01641 G1 X-33.882 Y7.752 E.5951 G1 X-34.416 Y7.752 E.01641 G1 X-20.028 Y-6.636 E.62569 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.386 Y-7.278 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-18.862 Y-7.802 E.02275 G1 X-19.076 Y-8.122 E.01183 G1 X-19.75 Y-7.448 E.02929 G1 X-20.198 Y-7.448 E.01379 G1 X-20.198 Y-7 E.01379 G1 X-34.95 Y7.752 E.64152 G1 X-35.483 Y7.752 E.01641 G1 X-19.259 Y-8.473 E.70558 G3 X-19.409 Y-8.856 I1.381 J-.762 E.0127 G1 X-36.017 Y7.752 E.72226 G1 X-36.551 Y7.752 E.01641 G1 X-19.521 Y-9.278 E.7406 G3 X-19.584 Y-9.748 I1.753 J-.476 E.01463 G1 X-37.084 Y7.752 E.76105 G1 X-37.618 Y7.752 E.01641 G1 X-19.582 Y-10.284 E.78435 G3 X-19.482 Y-10.918 I2.458 J.064 E.0198 G1 X-38.152 Y7.752 E.81193 G1 X-38.685 Y7.752 E.01641 G1 X-19.182 Y-11.752 E.84819 G1 X-19.715 Y-11.752 E.01641 G1 X-39.219 Y7.752 E.84819 G1 X-39.753 Y7.752 E.01641 G1 X-20.249 Y-11.752 E.84819 G1 X-20.698 Y-11.752 E.01381 G1 X-20.698 Y-11.836 E.0026 G1 X-40.286 Y7.752 E.85186 G1 X-40.82 Y7.752 E.01641 G1 X-20.698 Y-12.37 E.87507 G1 X-20.698 Y-12.904 E.01641 G1 X-41.354 Y7.752 E.89828 G1 X-41.888 Y7.752 E.01641 G1 X-20.698 Y-13.438 E.92149 G1 X-20.698 Y-13.971 E.01641 G1 X-42.421 Y7.752 E.9447 G1 X-42.955 Y7.752 E.01641 G1 X-20.698 Y-14.505 E.96791 G1 X-20.698 Y-15.039 E.01641 G1 X-43.489 Y7.752 E.99112 G1 X-44.022 Y7.752 E.01641 G1 X-20.698 Y-15.572 E1.01433 G1 X-20.698 Y-16.106 E.01641 G1 X-44.556 Y7.752 E1.03754 G1 X-45.09 Y7.752 E.01641 G1 X-20.698 Y-16.64 E1.06075 G1 X-20.698 Y-17.173 E.01641 G1 X-45.623 Y7.752 E1.08395 G1 X-46.157 Y7.752 E.01641 G1 X-20.698 Y-17.707 E1.10716 G1 X-20.698 Y-18.241 E.01641 G1 X-46.691 Y7.752 E1.13037 G1 X-47.224 Y7.752 E.01641 G1 X-20.698 Y-18.774 E1.15358 G1 X-20.698 Y-19.308 E.01641 G1 X-47.758 Y7.752 E1.17679 G1 X-48.292 Y7.752 E.01641 G1 X-20.698 Y-19.842 E1.2 G1 X-20.698 Y-20.375 E.01641 G1 X-48.825 Y7.752 E1.22321 G1 X-49.359 Y7.752 E.01641 G1 X-20.698 Y-20.909 E1.24642 G1 X-20.698 Y-21.443 E.01641 G1 X-49.893 Y7.752 E1.26963 G1 X-50.426 Y7.752 E.01641 G1 X-20.698 Y-21.976 E1.29283 G1 X-20.698 Y-22.51 E.01641 G1 X-50.96 Y7.752 E1.31604 G1 X-51.494 Y7.752 E.01641 G1 X-20.698 Y-23.044 E1.33925 G1 X-20.698 Y-23.577 E.01641 G1 X-52.027 Y7.752 E1.36246 G1 X-52.561 Y7.752 E.01641 G1 X-20.698 Y-24.111 E1.38567 G1 X-20.698 Y-24.645 E.01641 G1 X-53.095 Y7.752 E1.40888 G1 X-53.629 Y7.752 E.01641 G1 X-21.125 Y-24.752 E1.41353 G1 X-21.658 Y-24.752 E.01641 G1 X-40.14 Y-6.271 E.80372 G2 X-40.109 Y-6.835 I-2.35 J-.409 E.01741 G1 X-22.192 Y-24.752 E.77919 G1 X-22.726 Y-24.752 E.01641 G1 X-40.182 Y-7.296 E.75913 G2 X-40.334 Y-7.678 I-2.098 J.614 E.01265 G1 X-23.259 Y-24.752 E.74253 G1 X-23.793 Y-24.752 E.01641 G1 X-40.524 Y-8.021 E.72762 G2 X-40.764 Y-8.315 I-1.238 J.761 E.0117 G1 X-24.327 Y-24.752 E.71481 G1 X-24.861 Y-24.752 E.01641 G1 X-41.048 Y-8.564 E.70397 G2 X-41.379 Y-8.767 I-.936 J1.155 E.01197 G1 X-25.394 Y-24.752 E.69514 G1 X-25.928 Y-24.752 E.01641 G1 X-41.758 Y-8.922 E.68841 G2 X-42.199 Y-9.014 I-.776 J2.614 E.01389 G1 X-26.462 Y-24.752 E.6844 G1 X-26.995 Y-24.752 E.01641 G1 X-42.95 Y-8.797 E.69386 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-41.536 Y-10.211 ;WIPE_END G1 X-41.812 Y-4.599 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-54.162 Y7.752 E.5371 G1 X-54.696 Y7.752 E.01641 G1 X-42.605 Y-4.339 E.52583 G3 X-43.066 Y-4.412 I.275 J-3.253 E.01437 G1 X-55.23 Y7.752 E.52898 G1 X-55.763 Y7.752 E.01641 G1 X-43.452 Y-4.559 E.53537 G3 X-43.791 Y-4.755 I.574 J-1.381 E.01205 G1 X-56.297 Y7.752 E.54388 G1 X-56.831 Y7.752 E.01641 G1 X-44.085 Y-4.994 E.55429 G3 X-44.334 Y-5.278 I2.761 J-2.675 E.01163 G1 X-57.364 Y7.752 E.56665 G1 X-57.898 Y7.752 E.01641 G1 X-44.537 Y-5.609 E.58104 G3 X-44.692 Y-5.988 I1.361 J-.778 E.01262 G1 X-58.432 Y7.752 E.59751 G1 X-58.965 Y7.752 E.01641 G1 X-44.784 Y-6.429 E.61671 G3 X-44.782 Y-6.965 I2.037 J-.259 E.01653 G1 X-59.499 Y7.752 E.64001 G1 X-60.033 Y7.752 E.01641 G1 X-27.529 Y-24.752 E1.41353 G1 X-28.063 Y-24.752 E.01641 G1 X-60.566 Y7.752 E1.41353 G1 X-61.1 Y7.752 E.01641 G1 X-28.596 Y-24.752 E1.41353 G1 X-29.13 Y-24.752 E.01641 G1 X-61.634 Y7.752 E1.41353 G1 X-62.167 Y7.752 E.01641 G1 X-29.664 Y-24.752 E1.41353 G1 X-30.197 Y-24.752 E.01641 G1 X-62.701 Y7.752 E1.41353 G1 X-63.235 Y7.752 E.01641 G1 X-30.731 Y-24.752 E1.41353 G1 X-31.265 Y-24.752 E.01641 G1 X-63.768 Y7.752 E1.41353 G1 X-64.302 Y7.752 E.01641 G1 X-31.798 Y-24.752 E1.41353 G1 X-32.332 Y-24.752 E.01641 G1 X-64.836 Y7.752 E1.41353 G1 X-65.37 Y7.752 E.01641 G1 X-32.866 Y-24.752 E1.41353 G1 X-33.399 Y-24.752 E.01641 G1 X-65.903 Y7.752 E1.41353 G1 X-66.437 Y7.752 E.01641 G1 X-33.933 Y-24.752 E1.41353 G1 X-34.467 Y-24.752 E.01641 G1 X-66.971 Y7.752 E1.41353 G1 X-67.504 Y7.752 E.01641 G1 X-35 Y-24.752 E1.41353 G1 X-35.534 Y-24.752 E.01641 G1 X-68.038 Y7.752 E1.41353 G1 X-68.572 Y7.752 E.01641 G1 X-36.068 Y-24.752 E1.41353 G1 X-36.602 Y-24.752 E.01641 G1 X-69.105 Y7.752 E1.41353 G1 X-69.639 Y7.752 E.01641 G1 X-37.135 Y-24.752 E1.41353 G1 X-37.669 Y-24.752 E.01641 G1 X-70.173 Y7.752 E1.41353 G1 X-70.706 Y7.752 E.01641 G1 X-38.203 Y-24.752 E1.41353 G1 X-38.736 Y-24.752 E.01641 G1 X-71.24 Y7.752 E1.41353 G1 X-71.774 Y7.752 E.01641 G1 X-39.27 Y-24.752 E1.41353 G1 X-39.804 Y-24.752 E.01641 G1 X-72.307 Y7.752 E1.41353 G1 X-72.841 Y7.752 E.01641 G1 X-40.337 Y-24.752 E1.41353 G1 X-40.871 Y-24.752 E.01641 G1 X-85.375 Y19.752 E1.93539 G1 X-85.908 Y19.752 E.01641 G1 X-61.699 Y-4.458 E1.05284 G2 X-60.236 Y-5.92 I-.705 J-2.168 E.06601 G1 X-41.405 Y-24.752 E.81896 G1 X-41.938 Y-24.752 E.01641 G1 X-60.105 Y-6.585 E.79006 G2 X-60.139 Y-7.085 I-2.467 J-.087 E.01544 G1 X-42.472 Y-24.752 E.7683 G1 X-43.006 Y-24.752 E.01641 G1 X-60.255 Y-7.502 E.75015 G1 X-60.423 Y-7.868 E.01238 G1 X-43.539 Y-24.752 E.73423 G1 X-44.073 Y-24.752 E.01641 G1 X-60.645 Y-8.18 E.72069 G2 X-60.91 Y-8.449 I-1.155 J.869 E.01164 G1 X-44.607 Y-24.752 E.70898 G1 X-45.14 Y-24.752 E.01641 G1 X-61.216 Y-8.677 E.69909 G2 X-61.568 Y-8.858 I-1.81 J3.085 E.01219 G1 X-45.674 Y-24.752 E.6912 G1 X-46.208 Y-24.752 E.01641 G1 X-61.981 Y-8.978 E.68596 G2 X-62.463 Y-9.03 I-.569 J3.047 E.01493 G1 X-46.572 Y-24.922 E.6911 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.173 Y-4.517 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-86.425 Y19.734 E1.05467 G1 X-86.958 Y19.734 E.01641 G1 X-62.855 Y-4.369 E1.04821 G3 X-63.275 Y-4.483 I.223 J-1.652 E.01341 G1 X-87.492 Y19.734 E1.05316 G1 X-88.026 Y19.734 E.01641 G1 X-63.638 Y-4.653 E1.06056 G3 X-63.95 Y-4.875 I.689 J-1.294 E.0118 G1 X-88.559 Y19.734 E1.07023 G1 X-89.093 Y19.734 E.01641 G1 X-64.219 Y-5.14 E1.08173 G3 X-64.447 Y-5.446 I1.049 J-1.017 E.01176 G1 X-89.627 Y19.734 E1.09504 G1 X-89.692 Y19.734 E.00199 G1 X-89.887 Y19.539 E.00851 G1 X-90.531 Y20.182 E.02799 G3 X-90.559 Y20.133 I.055 J-.063 E.00178 G1 X-64.628 Y-5.798 E1.12769 G3 X-64.748 Y-6.211 I1.509 J-.665 E.01327 G1 X-90.684 Y19.725 E1.12791 G1 X-90.684 Y19.191 E.01641 G1 X-64.618 Y-6.875 E1.13358 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.105 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-63.086 Y-8.941 E.69495 G2 X-64.711 Y-7.316 I.625 J2.25 E.07389 G1 X-90.702 Y18.675 E1.13031 G1 X-90.702 Y18.141 E.01641 G1 X-47.809 Y-24.752 E1.86534 G1 X-48.343 Y-24.752 E.01641 G1 X-90.702 Y17.607 E1.84214 G1 X-90.702 Y17.074 E.01641 G1 X-48.876 Y-24.752 E1.81893 G1 X-49.41 Y-24.752 E.01641 G1 X-90.702 Y16.54 E1.79572 G1 X-90.702 Y16.006 E.01641 G1 X-49.944 Y-24.752 E1.77251 G1 X-50.477 Y-24.752 E.01641 G1 X-90.702 Y15.473 E1.7493 G1 X-90.702 Y14.939 E.01641 G1 X-51.011 Y-24.752 E1.72609 G1 X-51.545 Y-24.752 E.01641 G1 X-90.702 Y14.405 E1.70288 G1 X-90.702 Y13.872 E.01641 G1 X-52.078 Y-24.752 E1.67967 G1 X-52.612 Y-24.752 E.01641 G1 X-90.702 Y13.338 E1.65646 G1 X-90.702 Y12.804 E.01641 G1 X-53.146 Y-24.752 E1.63326 G1 X-53.679 Y-24.752 E.01641 G1 X-90.702 Y12.271 E1.61005 G1 X-90.702 Y11.737 E.01641 G1 X-54.213 Y-24.752 E1.58684 G1 X-54.747 Y-24.752 E.01641 G1 X-90.702 Y11.203 E1.56363 G1 X-90.702 Y10.67 E.01641 G1 X-55.28 Y-24.752 E1.54042 G1 X-55.814 Y-24.752 E.01641 G1 X-90.702 Y10.136 E1.51721 G1 X-90.702 Y9.602 E.01641 G1 X-56.348 Y-24.752 E1.494 G1 X-56.881 Y-24.752 E.01641 G1 X-90.702 Y9.069 E1.47079 G1 X-90.702 Y8.535 E.01641 G1 X-57.415 Y-24.752 E1.44758 G1 X-57.949 Y-24.752 E.01641 G1 X-90.702 Y8.001 E1.42438 G1 X-90.702 Y7.468 E.01641 G1 X-58.482 Y-24.752 E1.40117 G1 X-59.016 Y-24.752 E.01641 G1 X-90.702 Y6.934 E1.37796 G1 X-90.702 Y6.4 E.01641 G1 X-59.55 Y-24.752 E1.35475 G1 X-60.084 Y-24.752 E.01641 G1 X-90.702 Y5.866 E1.33154 G1 X-90.702 Y5.333 E.01641 G1 X-60.617 Y-24.752 E1.30833 G1 X-61.151 Y-24.752 E.01641 G1 X-90.702 Y4.799 E1.28512 G1 X-90.702 Y4.265 E.01641 G1 X-61.685 Y-24.752 E1.26191 G1 X-62.218 Y-24.752 E.01641 G1 X-84.702 Y-2.268 E.97777 G1 X-84.702 Y-2.802 E.01641 G1 X-62.752 Y-24.752 E.95457 G1 X-63.286 Y-24.752 E.01641 G1 X-84.702 Y-3.336 E.93136 G1 X-84.702 Y-3.869 E.01641 G1 X-63.819 Y-24.752 E.90815 G1 X-64.353 Y-24.752 E.01641 G1 X-84.702 Y-4.403 E.88494 G1 X-84.702 Y-4.937 E.01641 G1 X-64.887 Y-24.752 E.86173 G1 X-65.42 Y-24.752 E.01641 G1 X-84.702 Y-5.47 E.83852 G1 X-84.702 Y-6.004 E.01641 G1 X-65.954 Y-24.752 E.81531 G1 X-66.488 Y-24.752 E.01641 G1 X-84.702 Y-6.538 E.7921 G1 X-84.702 Y-7.071 E.01641 G1 X-67.021 Y-24.752 E.76889 G1 X-67.555 Y-24.752 E.01641 G1 X-84.841 Y-7.466 E.75175 G1 X-85.375 Y-7.466 E.01641 G1 X-68.089 Y-24.752 E.75175 G1 X-68.622 Y-24.752 E.01641 G1 X-85.9 Y-7.475 E.75136 G1 X-85.979 Y-7.825 E.01105 G1 X-86.005 Y-7.851 E.00111 G1 X-85.899 Y-8.009 E.00586 G1 X-69.156 Y-24.752 E.72812 G1 X-69.69 Y-24.752 E.01641 G1 X-85.443 Y-8.999 E.68506 G1 X-85.33 Y-9.523 E.01649 G1 X-85.322 Y-9.653 E.00401 G1 X-70.223 Y-24.752 E.65661 G1 X-70.757 Y-24.752 E.01641 G1 X-85.312 Y-10.197 E.63297 G2 X-85.37 Y-10.673 I-1.838 J-.02 E.01479 G1 X-71.291 Y-24.752 E.61226 G1 X-71.825 Y-24.752 E.01641 G1 X-84.202 Y-12.375 E.53827 G1 X-84.202 Y-12.908 E.01641 G1 X-72.358 Y-24.752 E.51506 G1 X-72.892 Y-24.752 E.01641 G1 X-84.202 Y-13.442 E.49185 G1 X-84.202 Y-13.976 E.01641 G1 X-73.426 Y-24.752 E.46864 G1 X-73.959 Y-24.752 E.01641 G1 X-84.202 Y-14.509 E.44543 G1 X-84.202 Y-15.043 E.01641 G1 X-74.493 Y-24.752 E.42223 G1 X-75.027 Y-24.752 E.01641 G1 X-84.202 Y-15.577 E.39902 G1 X-84.202 Y-16.11 E.01641 G1 X-75.56 Y-24.752 E.37581 G1 X-76.094 Y-24.752 E.01641 G1 X-84.202 Y-16.644 E.3526 G1 X-84.202 Y-17.178 E.01641 G1 X-76.628 Y-24.752 E.32939 G1 X-77.161 Y-24.752 E.01641 G1 X-84.202 Y-17.711 E.30618 G1 X-84.202 Y-18.245 E.01641 G1 X-77.695 Y-24.752 E.28297 G1 X-78.229 Y-24.752 E.01641 G1 X-84.202 Y-18.779 E.25976 G1 X-84.202 Y-19.312 E.01641 G1 X-78.762 Y-24.752 E.23655 G1 X-79.296 Y-24.752 E.01641 G1 X-84.202 Y-19.846 E.21335 G1 X-84.202 Y-20.38 E.01641 G1 X-79.83 Y-24.752 E.19014 G1 X-80.363 Y-24.752 E.01641 G1 X-84.202 Y-20.913 E.16693 G1 X-84.202 Y-21.447 E.01641 G1 X-80.897 Y-24.752 E.14372 G1 X-81.431 Y-24.752 E.01641 G1 X-84.202 Y-21.981 E.12051 G1 X-84.202 Y-22.514 E.01641 G1 X-81.964 Y-24.752 E.0973 G1 X-82.498 Y-24.752 E.01641 G1 X-84.202 Y-23.048 E.07409 G1 X-84.202 Y-23.582 E.01641 G1 X-83.032 Y-24.752 E.05088 G1 X-83.566 Y-24.752 E.01641 G1 X-84.372 Y-23.946 E.03505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.61 Y-10.966 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-84.825 Y-11.752 E.03416 G1 X-85.358 Y-11.752 E.01641 G1 X-85.749 Y-11.361 E.01698 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-85.358 Y-11.752 G1 X-84.825 Y-11.752 G1 X-85.471 Y-11.106 ;WIPE_END G1 X-88.055 Y-3.924 Z2.8 F30000 G1 X-90.872 Y3.901 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X-85.418 Y-1.552 E.23715 G1 X-85.952 Y-1.552 E.01641 G1 X-90.702 Y3.198 E.20657 G1 X-90.702 Y2.664 E.01641 G1 X-86.486 Y-1.552 E.18336 G1 X-87.019 Y-1.552 E.01641 G1 X-90.702 Y2.131 E.16015 G1 X-90.702 Y1.597 E.01641 G1 X-87.383 Y-1.722 E.14432 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.244 Y-1.356 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X-89.706 Y-1.356 E.04491 ;WIDTH:0.43955 G1 X-89.788 Y-1.405 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y-1.454 E.0034 ;WIDTH:0.53712 G1 X-89.953 Y-1.502 E.00386 G1 X-89.953 Y-6.244 E.19095 G1 X-90.447 Y-6.394 E.0208 G1 X-90.447 Y-1.544 E.19529 ;WIDTH:0.517753 G1 X-90.467 Y-1.263 E.01091 ;WIDTH:0.478651 G1 X-90.486 Y-.982 E.01001 ;WIDTH:0.422183 G1 X-90.506 Y-.701 E.00871 G1 X-90.506 Y.906 E.04966 G1 X-88.272 Y-1.328 E.09762 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.275 Y-.929 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.519985 G1 F15000 G1 X-89.803 Y-.936 E.02051 G1 X-90.079 Y-1.208 E.01507 G1 X-90.079 Y-.125 E.04211 G1 X-89.303 Y-.9 E.04263 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-91.209 Y-8.258 F30000 ;TYPE:Gap infill ;WIDTH:0.119134 G1 F12000 G1 X-91.33 Y-8.396 E.00114 ;WIDTH:0.161125 G1 X-91.451 Y-8.534 E.00177 G1 X-91.508 Y-8.744 E.00209 G1 X-91.522 Y-11.294 F30000 ;WIDTH:0.418022 G1 F12000 G1 X-91.088 Y-12.572 E.04129 G1 X-91.522 Y-12.138 F30000 ;WIDTH:0.401719 G1 F12000 G1 X-90.244 Y-12.572 E.03949 G1 X-87.694 Y-12.558 F30000 ;WIDTH:0.161122 G1 F12000 G1 X-87.484 Y-12.501 E.00209 G1 X-87.346 Y-12.38 E.00177 ;WIDTH:0.119131 G1 X-87.208 Y-12.259 E.00114 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-87.346 Y-12.38 ;WIPE_END G1 X-85.37 Y-19.752 Z2.8 F30000 G1 X-84.054 Y-24.662 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F15000 G1 X-84.117 Y-24.625 E.00204 G1 X-84.052 Y-24.59 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X-84.117 Y-24.625 G1 X-84.054 Y-24.662 ;WIPE_END G1 X-85.049 Y-17.095 Z2.8 F30000 G1 X-89.953 Y20.167 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.537303 G1 F15000 G1 X-90.356 Y20.57 E.02299 G1 X-90.447 Y20.579 E.00368 G1 X-90.447 Y26.256 E.2287 ;WIDTH:0.517753 G1 X-90.467 Y26.529 E.01061 ;WIDTH:0.478651 G1 X-90.486 Y26.803 E.00973 ;WIDTH:0.420847 G1 X-90.506 Y27.076 E.00844 G1 X-90.506 Y28.636 E.04804 G1 X-88.314 Y26.444 E.09546 G1 X-89.706 Y26.444 E.04286 ;WIDTH:0.43955 G1 X-89.788 Y26.395 E.0031 ;WIDTH:0.478651 G1 X-89.87 Y26.346 E.0034 ;WIDTH:0.536698 G1 X-89.953 Y26.298 E.00385 G1 X-89.953 Y20.207 E.24507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.322 Y26.862 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.50057 G1 F15000 G1 X-89.817 Y26.851 E.0185 G1 X-90.088 Y26.577 E.01438 G1 X-90.088 Y27.628 E.03922 G1 X-89.35 Y26.89 E.03896 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.447 Y47.276 F30000 ;TYPE:Gap infill ;WIDTH:0.435619 G1 F12000 G2 X-90.507 Y47.54 I4.023 J1.064 E.00865 ;WIDTH:0.397645 G1 X-90.527 Y47.659 E.0035 ;WIDTH:0.358142 G1 X-90.547 Y47.779 E.00311 ;WIDTH:0.318639 G1 X-90.566 Y47.899 E.00272 ;WIDTH:0.276878 G1 X-90.588 Y48.032 E.00258 ;WIDTH:0.232118 G1 X-90.612 Y48.272 E.00371 ;WIDTH:0.184233 G1 X-90.636 Y48.519 E.00286 ;WIDTH:0.14478 G1 X-90.651 Y49.003 E.00402 G2 X-90.635 Y49.489 I7.429 J-.004 E.00404 ;WIDTH:0.161417 G1 X-90.61 Y49.744 E.00248 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.635 Y49.489 ;WIPE_END G1 X-85.082 Y44.253 Z2.8 F30000 G1 X6.16 Y-41.79 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z2.8 F30000 G1 X74.198 Y15.448 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z2.8 F30000 G1 X90.96 Y7.29 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z2.8 F30000 G1 X75.04 Y16.29 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X75.235 Y15.237 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.0382 G2 X76.207 Y14.326 I-1.188 J-.238 E.03162 G3 X75.298 Y13.343 I8.864 J-9.108 E.04442 G3 X75.411 Y11.705 I1.582 J-.714 E.05673 G2 X76.387 Y10.571 I-2.838 J-3.43 E.04988 G1 X76.387 Y9.519 E.03489 G1 X76.207 Y9.084 E.0156 G1 X75.58 Y8.429 E.03008 G3 X75.152 Y7.763 I1.218 J-1.254 E.0265 G1 X74.313 Y7.763 E.02781 G1 X74.313 Y8.553 E.0262 G1 X77.223 Y7 F30000 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X91.178 Y7 E.1651 G1 X91.226 Y7.024 E.00064 ;WIDTH:0.260421 G1 X91.274 Y7.048 E.00096 ;WIDTH:0.308755 G1 X91.323 Y7.073 E.00117 ;WIDTH:0.346671 G1 X91.336 Y7.086 E.00048 ;WIDTH:0.374169 G1 X91.35 Y7.1 E.00052 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.24737 G1 X91.336 Y15.914 E.00055 ;WIDTH:0.346671 G1 X91.323 Y15.928 E.00048 ;WIDTH:0.308756 G1 X91.274 Y15.952 E.00117 ;WIDTH:0.260422 G1 X91.226 Y15.976 E.00096 ;WIDTH:0.212089 G1 X91.178 Y16 E.00074 ;WIDTH:0.187921 G1 X77.223 Y16 E.16489 G1 X74.15 Y15.651 F30000 ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X69.268 Y21.519 Z2.8 F30000 G1 X55.548 Y38.01 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z2.8 F30000 G1 Z2.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z2.8 F30000 G1 X33.195 Y38.745 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z2.8 F30000 G1 X3.102 Y40.648 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z2.8 F30000 G1 X33.602 Y39.152 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z2.8 F30000 G1 X2.695 Y41.055 Z2.8 G1 Z2.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 M73 P28 R77 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.46 Z2.8 F30000 G1 X34.7 Y39.363 Z2.8 G1 Z2.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X33.813 Y39.363 E.0294 G1 X33.813 Y40.105 E.02461 G1 X34.131 Y40.437 E.01524 G1 X35.759 Y40.437 E.05401 ;LAYER_CHANGE ;Z:2.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X34.131 Y40.437 G1 X33.874 Y40.168 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z3 I.829 J-.891 P1 F30000 G1 X-16.24 Y-6.41 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-16.24 Y-2.59 E.11738 G1 X-19.16 Y-2.59 E.08972 G1 X-19.16 Y-6.41 E.11738 G1 X-16.28 Y-6.41 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-16.259 Y-4.41 ;WIPE_END G1 X-19.244 Y2.614 Z3 F30000 G1 X-31.398 Y31.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-31.398 Y32.052 E.02793 G1 X-73.502 Y32.052 E1.39667 G1 X-73.502 Y7.948 E.79958 G1 X-31.398 Y7.948 E1.39667 G1 X-31.398 Y31.17 E.77032 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.805 Y31.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-31.805 Y31.645 E.01443 G1 X-73.095 Y31.645 E1.36966 G1 X-73.095 Y8.355 E.77257 G1 X-31.805 Y8.355 E1.36966 G1 X-31.805 Y31.17 E.75682 G1 X-32.24 Y31.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.66 Y31.21 E1.24199 G1 X-72.66 Y8.79 E.6889 G1 X-32.24 Y8.79 E1.24199 G1 X-32.24 Y31.17 E.68767 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-34.24 Y31.172 ;WIPE_END G1 X-39.039 Y25.237 Z3 F30000 G1 X-64.575 Y-6.344 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.591 Y-6.398 E.00188 G3 X-63.761 Y-8.389 I2.134 J-.279 E.07494 G3 X-62.616 Y-8.823 I1.323 J1.761 E.04118 G3 X-64.536 Y-6.121 I.159 J2.146 E.32297 G1 X-64.568 Y-6.304 E.00618 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.169 Y-6.402 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-64.181 Y-6.452 E.00171 G3 X-62.59 Y-8.417 I1.727 J-.229 E.09388 G3 X-63.198 Y-5.106 I.142 J1.738 E.21217 G3 X-64.095 Y-6.095 I.743 J-1.575 E.04545 G1 X-64.16 Y-6.363 E.00917 G1 X-63.749 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.755 Y-6.508 E.0002 G3 X-62.951 Y-7.891 I1.297 J-.171 E.05287 G3 X-62.561 Y-7.983 I.52 J1.327 E.01237 G3 X-63.688 Y-6.233 I.103 J1.304 E.1786 G1 X-63.74 Y-6.469 E.00743 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.755 Y-6.508 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.716 Y-7.958 ;WIPE_END G1 X-55.115 Y-7.268 Z3 F30000 G1 X-40.433 Y-5.935 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.467 Y-5.859 E.00276 G3 X-43.761 Y-8.389 I-1.99 J-.819 E.26204 M73 P29 R77 G3 X-42.616 Y-8.823 I1.323 J1.761 E.04118 G3 X-40.378 Y-6.125 I.159 J2.146 E.13594 G1 X-40.422 Y-5.973 E.00524 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.818 Y-6.065 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-40.837 Y-6.012 E.00188 G3 X-43.198 Y-5.106 I-1.611 J-.668 E.09386 G3 X-42.59 Y-8.417 I.743 J-1.575 E.15155 G3 X-40.763 Y-6.228 I.142 J1.738 E.11073 G1 X-40.805 Y-6.103 E.00437 G1 X-41.23 Y-6.205 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.248 Y-6.182 E.0009 G3 X-42.951 Y-7.891 I-1.21 J-.497 E.15824 G3 X-42.561 Y-7.983 I.52 J1.327 E.01237 G3 X-41.194 Y-6.343 I.103 J1.304 E.07673 G1 X-41.22 Y-6.244 E.00316 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.248 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.836 Y-5.438 ;WIPE_END G1 X-38.276 Y.682 Z3 F30000 G1 X-20.002 Y25.21 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.002 Y19.948 E.17455 G1 X-15.398 Y19.948 E.15273 G1 X-15.398 Y26.052 E.20249 G1 X-20.002 Y26.052 E.15273 G1 X-20.002 Y25.25 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.595 Y25.21 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-19.595 Y20.355 E.16105 G1 X-15.805 Y20.355 E.12572 G1 X-15.805 Y25.645 E.17548 G1 X-19.595 Y25.645 E.12572 G1 X-19.595 Y25.25 E.0131 G1 X-19.16 Y25.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-19.16 Y20.79 E.13581 G1 X-16.24 Y20.79 E.08972 G1 X-16.24 Y25.21 E.13581 G1 X-19.12 Y25.21 E.08849 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-19.138 Y23.21 ;WIPE_END G1 X-23.231 Y29.652 Z3 F30000 G1 X-33.197 Y45.337 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.275 Y45.313 E.00273 G3 X-33.762 Y41.611 I.818 J-1.99 E.14994 G3 X-32.616 Y41.177 I1.323 J1.761 E.04118 G3 X-33.008 Y45.403 I.159 J2.146 E.24799 G1 X-33.159 Y45.35 E.0053 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.066 Y44.951 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-33.119 Y44.935 E.00185 G3 X-33.323 Y41.808 I.661 J-1.614 E.1292 G3 X-32.59 Y41.583 I.851 J1.467 E.02568 G3 X-32.902 Y45.008 I.132 J1.739 E.20099 G1 X-33.028 Y44.964 E.00441 G1 X-32.925 Y44.538 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.533 E.00087 G3 X-32.951 Y42.109 I.494 J-1.212 E.09522 G3 X-32.561 Y42.017 I.52 J1.327 E.01237 G3 X-32.621 Y44.62 I.103 J1.305 E.13453 G1 X-32.886 Y44.548 E.00844 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.68 Y43.765 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.749 Y43.149 G1 X-33.692 Y42.937 ;WIPE_END G1 X-41.311 Y43.4 Z3 F30000 G1 X-73.19 Y45.339 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.275 Y45.313 E.00296 G3 X-73.761 Y41.611 I.818 J-1.99 E.14994 G3 X-72.616 Y41.177 I1.323 J1.761 E.04118 G3 X-73.008 Y45.403 I.159 J2.146 E.24799 G1 X-73.152 Y45.352 E.00507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.059 Y44.953 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-73.119 Y44.935 E.00207 G3 X-73.323 Y41.808 I.661 J-1.614 E.1292 G3 X-72.59 Y41.583 I.851 J1.467 E.02568 G3 X-72.902 Y45.008 I.132 J1.739 E.20099 G1 X-73.022 Y44.967 E.00419 G1 X-72.918 Y44.54 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.533 E.00107 G3 X-72.951 Y42.109 I.494 J-1.212 E.09522 G3 X-72.561 Y42.017 I.52 J1.327 E.01237 G3 X-72.621 Y44.62 I.103 J1.305 E.13453 G1 X-72.88 Y44.55 E.00823 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.7 Y42.942 ;WIPE_END G1 X-77.862 Y36.545 Z3 F30000 G1 X-88.66 Y19.948 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.898 Y19.948 E.1248 G1 X-84.898 Y26.052 E.20249 G1 X-89.502 Y26.052 E.15273 G1 X-89.502 Y19.948 E.20249 G1 X-88.7 Y19.948 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.66 Y20.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-85.305 Y20.355 E.11129 G1 X-85.305 Y25.645 E.17548 G1 X-89.095 Y25.645 E.12572 G1 X-89.095 Y20.355 E.17548 G1 X-88.7 Y20.355 E.0131 G1 X-88.66 Y20.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.74 Y20.79 E.08972 G1 X-85.74 Y25.21 E.13581 G1 X-88.66 Y25.21 E.08972 G1 X-88.66 Y20.83 E.13459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y20.803 ;WIPE_END G1 X-79.786 Y17.485 Z3 F30000 G1 X-18.794 Y-11.948 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G2 X-18.044 Y-7.252 I2.847 J1.953 E.174 G1 X-20.002 Y-7.252 E.06494 G1 X-20.002 Y-1.748 E.18258 G1 X-15.398 Y-1.748 E.15273 G1 X-15.398 Y-6.595 E.1608 G2 X-14.002 Y-7.156 I-.443 J-3.121 E.05038 G1 X-14.002 Y49.948 E1.89424 G1 X-14.624 Y49.948 E.02063 G2 X-21.276 Y49.948 I-3.326 J-.94 E.42337 G1 X-83.624 Y49.948 E2.0682 G2 X-90.276 Y49.948 I-3.326 J-.94 E.42337 G1 X-90.898 Y49.948 E.02063 G1 X-90.898 Y-7.156 E1.89424 G2 X-89.502 Y-6.595 I1.839 J-2.561 E.05038 G1 X-89.502 Y-1.748 E.1608 G1 X-84.898 Y-1.748 E.15273 G1 X-84.898 Y-7.252 E.18258 G1 X-86.856 Y-7.252 E.06494 G2 X-86.106 Y-11.948 I-2.097 J-2.743 E.174 G1 X-84.398 Y-11.948 E.05666 G1 X-84.398 Y-24.948 E.43123 G1 X-20.502 Y-24.948 E2.11954 G1 X-20.502 Y-11.948 E.43123 G1 X-18.834 Y-11.948 E.05533 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.928 Y-12.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X-18.367 Y-11.855 E.02208 G2 X-16.715 Y-7.049 I2.433 J1.85 E.19898 G1 X-16.749 Y-6.845 E.00687 G1 X-19.595 Y-6.845 E.09441 G1 X-19.595 Y-2.155 E.15558 G1 X-15.805 Y-2.155 E.12572 G1 X-15.805 Y-6.963 E.15949 G2 X-14.095 Y-7.583 I-.161 J-3.109 E.06121 G1 X-13.595 Y-8.022 E.02208 G1 X-13.595 Y50.355 E1.93647 G1 X-15.229 Y50.355 E.0542 G2 X-20.671 Y50.355 I-2.721 J-1.36 E.41051 G1 X-84.229 Y50.355 E2.10832 G2 X-89.671 Y50.355 I-2.721 J-1.36 E.41051 G1 X-91.305 Y50.355 E.0542 G1 X-91.305 Y-8.022 E1.93647 G1 X-90.805 Y-7.583 E.02208 G2 X-89.095 Y-6.963 I1.87 J-2.489 E.06121 G1 X-89.095 Y-2.155 E.15949 G1 X-85.305 Y-2.155 E.12572 G1 X-85.305 Y-6.845 E.15558 G1 X-88.151 Y-6.845 E.09442 G1 X-88.185 Y-7.049 E.00687 G2 X-86.533 Y-11.855 I-.781 J-2.955 E.19898 G1 X-86.972 Y-12.355 E.02208 G1 X-84.805 Y-12.355 E.07189 G1 X-84.805 Y-25.355 E.43123 G1 X-20.095 Y-25.355 E2.14655 G1 X-20.095 Y-12.355 E.43123 G1 X-17.968 Y-12.355 E.07056 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X-18.367 Y-11.855 G1 X-18.588 Y-11.523 G1 X-18.764 Y-11.166 G1 X-18.893 Y-10.788 G1 X-18.925 Y-10.627 ;WIPE_END G1 X-15.275 Y-12.52 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-15.95 Y-7.39 I-.68 J2.52 E.23065 G3 X-16.291 Y-12.588 I.006 J-2.611 E.24116 G3 X-15.314 Y-12.53 I.335 J2.588 E.03026 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.951 Y-12.412 G1 X-14.645 Y-12.261 G1 X-14.361 Y-12.071 G1 X-14.104 Y-11.846 G1 X-13.879 Y-11.589 G1 X-13.738 Y-11.379 ;WIPE_END G1 X-21.354 Y-10.874 Z3 F30000 G1 X-88.66 Y-6.41 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-85.74 Y-6.41 E.08972 G1 X-85.74 Y-2.59 E.11738 G1 X-88.66 Y-2.59 E.08972 G1 X-88.66 Y-6.37 E.11615 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-86.66 Y-6.397 ;WIPE_END G1 X-90.254 Y-7.742 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-89.291 Y-12.588 I1.31 J-2.259 E.19919 G3 X-88.95 Y-7.39 I.335 J2.588 E.26214 G3 X-90.219 Y-7.722 I.006 J-2.611 E.04075 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.539 Y-7.929 G1 X-90.796 Y-8.154 G1 X-91.021 Y-8.411 G1 X-91.211 Y-8.695 G1 X-91.362 Y-9.001 G1 X-91.443 Y-9.241 ;WIPE_END G1 X-83.82 Y-9.618 Z3 F30000 G1 X-19.66 Y-12.79 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-13.16 Y-12.79 E.19973 G1 X-13.16 Y50.79 E1.95364 G1 X-16.055 Y50.79 E.08896 G2 X-19.845 Y50.79 I-1.895 J-1.792 E.37321 G1 X-85.055 Y50.79 E2.00373 G2 X-88.845 Y50.79 I-1.895 J-1.792 E.37321 G1 X-91.74 Y50.79 E.08896 G1 X-91.74 Y-12.79 E1.95364 G1 X-85.24 Y-12.79 E.19973 G1 X-85.24 Y-25.79 E.39945 G1 X-19.66 Y-25.79 E2.01509 G1 X-19.66 Y-12.83 E.39822 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.66 Y-12.818 ;WIPE_END G1 X-17.692 Y-12.259 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.141341 G1 F12000 G1 X-17.554 Y-12.38 E.00147 ;WIDTH:0.163551 G1 X-17.416 Y-12.501 E.00181 ;WIDTH:0.17539 G1 X-17.206 Y-12.558 E.00235 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-17.416 Y-12.501 ;WIPE_END G1 X-14.656 Y-12.572 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;WIDTH:0.418035 G1 F12000 G1 X-13.377 Y-12.138 E.04129 G1 X-13.812 Y-12.572 F30000 ;WIDTH:0.401732 G1 F12000 G1 X-13.377 Y-11.294 E.03949 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-13.812 Y-12.572 ;WIPE_END G1 X-13.392 Y-8.744 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;WIDTH:0.175391 G1 F12000 G1 X-13.449 Y-8.534 E.00235 ;WIDTH:0.163549 G1 X-13.57 Y-8.396 E.00181 ;WIDTH:0.14134 G1 X-13.691 Y-8.258 E.00147 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-13.57 Y-8.396 ;WIPE_END G1 X-14.454 Y-6.865 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.420643 G1 F12000 G1 X-14.028 Y-6.44 E.01851 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y-5.906 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.834 Y-6.711 E.03505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.254 Y-6.597 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y-5.372 E.05334 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y-4.838 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y-6.181 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y-5.647 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y-4.303 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y-3.769 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y-5.112 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y-4.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y-3.235 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y-2.701 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y-4.044 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y-3.51 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y-2.167 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y-1.633 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y-2.976 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y-2.441 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y-1.098 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y-.564 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y-1.907 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.72 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y-.03 E.07363 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y.504 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.254 Y-1.722 E.09689 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.788 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y1.038 E.12014 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y1.573 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.323 Y-1.722 E.14339 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.857 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y2.107 E.16664 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y2.641 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.391 Y-1.722 E.1899 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.925 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y3.175 E.21315 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y3.709 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.459 Y-1.722 E.2364 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.993 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y4.243 E.25965 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.443 Y2.829 ;WIPE_END G1 X-17.323 Y-4.568 Z3 F30000 G1 X-19.085 Y-11.496 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.51 Y-11.922 E.01851 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.044 Y-11.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.239 Y-11.116 E.03504 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.044 Y-11.922 ;WIPE_END G1 X-20.773 Y-19.519 Z3 F30000 G1 X-21.292 Y-24.922 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-24.158 E.03324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-23.624 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.826 Y-24.922 E.05649 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.36 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-23.09 E.07975 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-22.555 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.895 Y-24.922 E.103 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.429 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-22.021 E.12625 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-21.487 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.963 Y-24.922 E.1495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.497 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-20.953 E.17275 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-20.419 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.031 Y-24.922 E.19601 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-25.565 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-19.884 E.21926 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-19.35 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-26.1 Y-24.922 E.24251 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-26.634 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-18.816 E.26576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-18.282 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.168 Y-24.922 E.28902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.702 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-17.748 E.31227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-17.214 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-28.236 Y-24.922 E.33552 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-28.771 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-16.679 E.35877 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-16.145 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.305 Y-24.922 E.38203 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.839 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-15.611 E.40528 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-15.077 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.373 Y-24.922 E.42853 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.907 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-14.543 E.45178 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-14.008 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.441 Y-24.922 E.47504 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.976 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-13.474 E.49829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.528 Y-12.94 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.51 Y-24.922 E.52154 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.044 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.528 Y-12.406 E.54479 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-21.943 Y-13.82 ;WIPE_END G1 X-19.353 Y-10.696 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.578 Y-24.922 E.61922 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.112 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.416 Y-10.225 E.63972 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.41 Y-9.685 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.647 Y-24.922 E.66323 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.181 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.288 Y-9.029 E.69178 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.703 Y-10.443 ;WIPE_END G1 X-18.786 Y-7.993 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.715 Y-24.922 E.7369 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.249 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.606 Y-7.278 E.76799 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.14 Y-7.278 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.783 Y-24.922 E.76799 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.317 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.674 Y-7.278 E.76799 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y-7.098 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.852 Y-24.922 E.77583 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.386 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y-6.564 E.79908 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y-6.03 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.92 Y-24.922 E.82233 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.454 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y-5.496 E.84558 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y-4.962 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.988 Y-24.922 E.86884 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.523 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y-4.427 E.89209 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y-3.893 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.057 Y-24.922 E.91534 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.591 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y-3.359 E.93859 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y-2.825 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.125 Y-24.922 E.96185 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.659 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y-2.291 E.9851 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y-1.757 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.193 Y-24.922 E1.00835 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.728 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y4.778 E1.29278 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y5.312 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.262 Y-24.922 E1.31603 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.796 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y5.846 E1.33928 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y6.38 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.33 Y-24.922 E1.36253 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.864 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y6.914 E1.38579 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y7.449 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.399 Y-24.922 E1.40904 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.933 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y7.983 E1.43229 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y8.517 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.467 Y-24.922 E1.45554 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.001 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y9.051 E1.4788 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y9.585 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.535 Y-24.922 E1.50205 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.069 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y10.119 E1.5253 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y10.654 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.604 Y-24.922 E1.54855 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.138 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y11.188 E1.57181 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y11.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.672 Y-24.922 E1.59506 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.206 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y12.256 E1.61831 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y12.79 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.74 Y-24.922 E1.64156 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-52.275 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y13.325 E1.66482 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y13.859 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-52.809 Y-24.922 E1.68807 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-53.343 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y14.393 E1.71132 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y14.927 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-53.877 Y-24.922 E1.73457 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-54.411 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y15.461 E1.75782 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y15.995 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-54.945 Y-24.922 E1.78108 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-55.48 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y16.53 E1.80433 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y17.064 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-56.014 Y-24.922 E1.82758 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-56.548 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y17.598 E1.85083 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y18.132 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-57.082 Y-24.922 E1.87409 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-57.616 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.98 Y-8.285 E.72418 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.048 Y-8.819 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-58.151 Y-24.922 E.70094 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-58.685 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.613 Y-8.85 E.69958 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.066 Y-8.769 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-59.219 Y-24.922 E.70311 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.753 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.446 Y-8.615 E.70981 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.776 Y-8.411 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.287 Y-24.922 E.7187 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.821 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.053 Y-8.153 E.72993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.285 Y-7.851 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.356 Y-24.922 E.74307 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.89 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.469 Y-7.501 E.7583 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.588 Y-7.086 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.424 Y-24.922 E.77638 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.958 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.625 Y-6.588 E.79804 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.483 Y-5.912 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.492 Y-24.922 E.82747 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-62.078 Y-23.507 ;WIPE_END G1 X-55.894 Y-19.034 Z3 F30000 G1 X-40.845 Y-8.15 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y18.666 E1.16731 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y19.201 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.311 Y-7.082 E1.14407 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.28 Y-6.517 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y19.735 E1.1427 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y20.269 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.361 Y-6.064 E1.14624 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.515 Y-5.684 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y20.803 E1.15294 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y21.337 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y19.994 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y20.528 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y21.871 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y22.406 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y21.062 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y21.597 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y22.94 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y23.474 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y22.131 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y22.665 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y24.008 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y24.542 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y23.199 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y23.733 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y25.077 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y25.611 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y24.268 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y24.802 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y26.145 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y26.679 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.372 Y25.336 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-15.372 Y25.87 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y27.213 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y27.747 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.697 Y26.078 E.07265 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.232 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y28.282 E.0959 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y28.816 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.766 Y26.078 E.11916 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.3 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y29.35 E.14241 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y29.884 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.834 Y26.078 E.16566 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.368 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y30.418 E.18891 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y30.953 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.903 Y26.078 E.21216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.437 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y31.487 E.23542 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y32.021 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.971 Y26.078 E.25867 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-18.557 Y27.493 ;WIPE_END G1 X-15.655 Y20.433 Z3 F30000 G1 X-15.444 Y19.922 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.719 Y-5.354 E1.1002 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.977 Y-5.077 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-15.978 Y19.922 E1.08818 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-16.512 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.279 Y-4.845 E1.07807 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.629 Y-4.661 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-17.047 Y19.922 E1.07004 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.581 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.044 Y-4.542 E1.06487 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.542 Y-4.505 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.115 Y19.922 E1.06328 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.649 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.225 Y-4.654 E1.06974 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.81 Y-3.24 ;WIPE_END G1 X-47.273 Y-8.571 Z3 F30000 G1 X-64.027 Y-24.922 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.183 Y19.922 E1.95198 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.718 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y8.268 E.50729 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y8.802 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y20.145 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y20.679 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y9.336 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y9.87 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y21.213 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y21.747 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y10.404 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y10.938 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y22.282 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y22.816 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y11.473 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y12.007 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y23.35 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y23.884 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y12.541 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y13.075 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y24.418 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y24.953 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y13.609 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y14.144 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.028 Y25.487 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.028 Y26.021 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y14.678 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y15.212 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y32.555 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y33.089 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y15.746 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y16.28 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y33.623 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y34.158 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y16.814 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y17.349 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y34.692 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y35.226 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y17.883 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y18.417 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y35.76 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y36.294 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y18.951 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y19.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y36.829 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y37.363 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y20.02 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y20.554 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y37.897 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y38.431 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y21.088 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y21.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y38.965 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y39.499 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y22.156 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y22.69 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y40.034 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y40.568 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y23.225 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y23.759 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y41.102 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y41.636 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y24.293 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y24.827 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y42.17 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y42.705 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y25.361 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y25.896 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y43.239 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y43.773 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y26.43 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y26.964 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y44.307 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y44.841 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y27.498 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y28.032 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y45.375 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y45.91 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y28.566 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y29.101 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.028 Y46.444 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-14.028 Y46.978 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y29.635 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y30.169 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-14.322 Y47.219 E.74215 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-15.736 Y45.804 ;WIPE_END G1 X-15.847 Y46.228 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y30.703 E.67579 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.372 Y31.237 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-16.931 Y45.678 E.62859 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-17.601 Y45.542 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.372 Y31.772 E.59942 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.599 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-18.145 Y45.532 E.58562 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-18.62 Y45.592 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.133 Y32.078 E.58823 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.667 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.043 Y45.703 E.59306 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-19.425 Y45.855 F30000 M73 P29 R76 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.201 Y32.078 E.59967 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.736 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-19.773 Y46.041 E.60777 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.091 Y46.258 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.27 Y32.078 E.6172 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.804 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.375 Y46.507 E.62807 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.629 Y46.787 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.338 Y32.078 E.64026 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.872 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-20.855 Y47.096 E.65369 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.051 Y47.434 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.406 Y32.078 E.66843 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.941 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.213 Y47.806 E.68462 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.336 Y48.218 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.475 Y32.078 E.70252 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.009 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.41 Y48.678 E.72256 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.417 Y49.204 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.543 Y32.078 E.74547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.077 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-21.326 Y49.829 E.77269 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-21.768 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.612 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.146 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-22.303 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-22.837 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.627 Y42.131 E.33911 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.296 Y42.997 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-23.371 Y49.922 E.30142 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-23.905 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.284 Y43.543 E.27766 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.377 Y43.984 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-24.439 Y49.922 E.25847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-24.973 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.536 Y44.359 E.24213 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.749 Y44.68 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-25.508 Y49.922 E.22814 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-26.042 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.011 Y44.952 E.2163 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.317 Y45.18 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-26.576 Y49.922 E.20638 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-27.11 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.676 Y45.355 E.19876 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.097 Y45.469 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-27.644 Y49.922 E.19384 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-28.179 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.61 Y45.49 E.19289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.314 Y45.32 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-28.713 Y49.922 E.2003 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-30.127 Y48.507 ;WIPE_END G1 X-34.252 Y42.086 Z3 F30000 G1 X-40.68 Y32.078 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.261 Y41.497 E.40999 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.127 Y41.166 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.214 Y32.078 E.39555 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.748 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.668 Y41.158 E.39524 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.114 Y41.247 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.282 Y32.078 E.39911 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.817 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.489 Y41.406 E.40602 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.81 Y41.619 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.351 Y32.078 E.41528 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.885 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.082 Y41.881 E.4267 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.31 Y42.187 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.419 Y32.078 E.44003 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.953 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.485 Y42.546 E.45566 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.599 Y42.967 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.488 Y32.078 E.47399 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.022 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.62 Y43.48 E.4963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.431 Y44.203 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.556 Y32.078 E.52777 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.09 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-29.247 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-29.781 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.624 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.158 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-30.315 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-30.849 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.693 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.227 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.384 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-31.918 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.761 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.295 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.452 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.986 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.829 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.364 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.52 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.055 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.898 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-52.432 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.589 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.123 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-52.966 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-53.5 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.657 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.191 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-54.034 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-54.569 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-36.725 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.26 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-55.103 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-55.637 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.794 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.328 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-56.171 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-56.705 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.862 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.396 Y49.922 F30000 M73 P30 R76 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-57.24 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-57.774 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.931 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.465 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-58.308 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-58.842 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.999 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.533 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-59.376 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.91 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.067 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.601 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.445 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.979 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.136 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.67 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.513 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.047 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.204 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.738 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.581 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-63.116 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.272 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.807 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.65 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.184 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.341 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.875 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-64.718 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-65.252 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.409 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.943 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-65.786 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-66.321 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.477 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.012 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-66.855 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-67.389 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.546 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.08 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-67.923 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-68.457 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.614 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.148 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-68.992 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-69.526 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-51.683 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-52.217 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.06 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.594 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-52.751 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-53.285 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-71.128 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-71.662 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-53.819 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-54.353 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-72.197 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.731 Y32.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-54.888 Y49.922 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-55.422 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.265 Y32.078 E.77669 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-71.851 Y33.493 ;WIPE_END G1 X-74.963 Y26.524 Z3 F30000 G1 X-89.528 Y-6.086 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.198 Y-6.756 E.02912 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y-6.895 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y-5.552 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y-5.018 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y-6.361 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y-5.827 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y-4.484 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y-3.95 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y-5.293 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y-4.759 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y-3.416 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y-2.881 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y-4.225 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y-3.69 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y-2.347 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y-1.813 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y-3.156 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-89.528 Y-1.813 ;WIPE_END G1 X-83.927 Y-6.997 Z3 F30000 G1 X-64.561 Y-24.922 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-31.718 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.252 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-65.095 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-65.629 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-32.786 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-33.32 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-66.163 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-66.697 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-33.854 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-34.388 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-67.232 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-67.766 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-34.923 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-35.457 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-68.3 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-68.834 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-35.991 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-36.525 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-69.368 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-69.903 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-37.059 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-37.594 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.437 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.971 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-38.128 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-38.662 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-71.505 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.039 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-39.196 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-39.73 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-72.573 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.108 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-40.264 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-40.799 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.642 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.176 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-41.333 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-41.867 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-74.71 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-75.244 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-42.401 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-42.935 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-75.779 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-76.313 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-43.47 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.004 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-76.847 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-77.381 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-44.538 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-45.072 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.398 Y-7.404 E.66711 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.274 Y-6.746 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-45.606 Y7.922 E.63845 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-46.14 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.316 Y-6.254 E.61705 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.437 Y-5.841 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-46.675 Y7.922 E.59908 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-47.209 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.625 Y-5.495 E.58399 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.859 Y-5.194 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-47.743 Y7.922 E.57091 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-48.277 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.138 Y-4.939 E.55983 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.47 Y-4.737 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-48.811 Y7.922 E.55102 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-49.346 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.852 Y-4.585 E.5444 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.31 Y-4.508 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-49.88 Y7.922 E.54107 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-50.414 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.883 Y-4.547 E.54276 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.469 Y-3.133 ;WIPE_END G1 X-61.726 Y-8.732 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-77.915 Y-24.922 E.70471 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-78.449 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.384 Y-8.856 E.6993 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.871 Y-8.809 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-78.984 Y-24.922 E.70135 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-79.518 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.289 Y-8.693 E.70643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-63.635 Y-8.505 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-80.052 Y-24.922 E.71459 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-80.586 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.936 Y-8.271 E.72477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.191 Y-7.992 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-81.12 Y-24.922 E.73693 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-81.655 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-64.393 Y-7.66 E.75138 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.545 Y-7.278 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-82.189 Y-24.922 E.76801 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.723 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-64.622 Y-6.82 E.78793 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.583 Y-6.247 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-83.257 Y-24.922 E.81288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-83.791 Y-24.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-50.948 Y7.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-51.482 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.325 Y-24.922 E1.42963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-24.434 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-52.016 Y7.922 E1.40839 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-52.551 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-23.899 E1.38513 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-23.365 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-53.085 Y7.922 E1.36188 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-53.619 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-22.831 E1.33863 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-22.297 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-54.153 Y7.922 E1.31538 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-54.687 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-21.763 E1.29212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-21.228 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-55.222 Y7.922 E1.26887 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-55.756 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-20.694 E1.24562 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-20.16 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-56.29 Y7.922 E1.22237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-56.824 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-19.626 E1.19912 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-19.092 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-57.358 Y7.922 E1.17586 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-57.892 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-18.558 E1.15261 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-18.023 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-58.427 Y7.922 E1.12936 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-58.961 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-17.489 E1.10611 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-16.955 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-59.495 Y7.922 E1.08285 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.029 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-16.421 E1.0596 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-15.887 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.563 Y7.922 E1.03635 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.098 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-15.352 E1.0131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-14.818 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.632 Y7.922 E.98984 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.166 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-14.284 E.96659 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-13.75 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.7 Y7.922 E.94334 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-63.234 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-13.216 E.92009 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.372 Y-12.682 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.768 Y7.922 E.89683 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-64.303 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.372 Y-12.147 E.87358 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.68 Y-11.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-64.837 Y7.922 E.86375 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-65.371 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.214 Y-11.922 E.86375 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.748 Y-11.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-65.905 Y7.922 E.86375 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-66.439 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.774 Y-11.413 E.84164 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.536 Y-10.641 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-66.973 Y7.922 E.80802 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-67.508 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.472 Y-10.043 E.78197 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.501 Y-9.537 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-68.042 Y7.922 E.75997 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-68.576 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.59 Y-9.092 E.74061 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.725 Y-8.694 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-69.11 Y7.922 E.72325 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-69.644 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.899 Y-8.333 E.70756 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.106 Y-8.005 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.379 Y-7.278 E.03164 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.913 Y-7.278 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-86.341 Y-7.707 E.01865 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-85.913 Y-7.278 ;WIPE_END G1 X-84.872 Y-6.771 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.179 Y7.922 E.63957 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.713 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y-6.237 E.61632 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y-5.703 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-71.247 Y7.922 E.59307 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-71.781 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y-5.169 E.56981 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y-4.635 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-72.315 Y7.922 E.54656 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.849 Y7.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y-4.101 E.52331 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y-3.566 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.384 Y7.922 E.50006 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y8.311 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y-3.032 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y-2.498 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y8.845 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y9.379 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y-1.964 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.164 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y9.914 E.50647 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y10.448 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.698 Y-1.722 E.52972 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.232 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y10.982 E.55297 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y11.516 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-86.766 Y-1.722 E.57622 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-87.3 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y12.05 E.59948 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y12.584 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-87.834 Y-1.722 E.62273 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.369 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y13.119 E.64598 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y13.653 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-88.903 Y-1.722 E.66923 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.437 Y-1.722 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y14.187 E.69248 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y14.721 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y-2.622 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y-2.088 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y15.255 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y15.79 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y-1.554 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y-1.019 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y16.324 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y16.858 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y-.485 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y.049 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y17.392 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y17.926 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y.583 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y1.117 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y18.46 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y18.995 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y1.651 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y2.186 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y19.529 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y20.063 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y2.72 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y3.254 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y20.597 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y21.131 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y3.788 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y4.322 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y21.666 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y22.2 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y4.857 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y5.391 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y22.734 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y23.268 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y5.925 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y6.459 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y23.802 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y24.336 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y6.993 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y7.527 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y24.871 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y25.405 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y8.062 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y8.596 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y25.939 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y26.473 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y9.13 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y9.664 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y27.007 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y27.542 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y10.198 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y10.733 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y28.076 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y28.61 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y11.267 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y11.801 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y29.144 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y29.678 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y12.335 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y12.869 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y30.212 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y30.747 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y13.403 E.75493 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y13.938 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.888 Y19.922 E.26047 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.422 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y14.472 E.23722 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y15.006 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.956 Y19.922 E.21397 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.49 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y15.54 E.19072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y16.074 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-87.024 Y19.922 E.16747 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-87.559 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y16.609 E.14421 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y17.143 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-88.093 Y19.922 E.12096 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.627 Y19.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y17.677 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y18.211 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.161 Y19.922 E.07446 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y20.088 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y18.745 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y19.279 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y20.623 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y21.157 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y19.814 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y20.348 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y21.691 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y22.225 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y20.882 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y21.416 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y22.759 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y23.294 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y21.95 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y22.485 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y23.828 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y24.362 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y23.019 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y23.553 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y24.896 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.528 Y25.43 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y24.087 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y24.621 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.528 Y25.964 E.05847 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.872 Y24.621 ;WIPE_END G1 X-84.872 Y19.938 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.528 Y31.281 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.528 Y31.815 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y20.472 E.49376 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y21.006 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-55.956 Y49.922 E1.25867 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-56.49 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y21.54 E1.23541 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y22.074 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-57.024 Y49.922 E1.21216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-57.559 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y22.609 E1.18891 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y23.143 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-58.093 Y49.922 E1.16566 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-58.627 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y23.677 E1.1424 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y24.211 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-59.161 Y49.922 E1.11915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-59.695 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y24.745 E1.0959 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.872 Y25.279 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-60.229 Y49.922 E1.07265 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-60.764 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-84.872 Y25.814 E1.04939 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-85.141 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-61.298 Y49.922 E1.03787 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-61.832 Y49.922 F30000 M73 P30 R75 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.675 Y26.078 E1.03787 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.209 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-62.366 Y49.922 E1.03787 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.9 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.531 Y42.291 E.33217 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.286 Y43.071 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-63.435 Y49.922 E.29822 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-63.969 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.288 Y43.603 E.27506 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.393 Y44.031 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-64.503 Y49.922 E.25641 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-65.037 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.557 Y44.402 E.24028 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.778 Y44.714 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-65.571 Y49.922 E.22667 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-66.105 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-71.045 Y44.982 E.21501 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-71.355 Y45.206 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-66.64 Y49.922 E.20527 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-67.174 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-71.724 Y45.372 E.19806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.15 Y45.479 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-67.708 Y49.922 E.19338 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-68.242 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-72.678 Y45.486 E.19309 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.44 Y45.258 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-68.776 Y49.922 E.20299 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-70.191 Y48.507 ;WIPE_END G1 X-71.421 Y41.401 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-86.744 Y26.078 E.66699 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-87.278 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-72.2 Y41.156 E.65629 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.723 Y41.167 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-87.812 Y26.078 E.65679 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.346 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.161 Y41.263 E.66099 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.532 Y41.427 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-88.88 Y26.078 E.66811 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.414 Y26.078 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.844 Y41.648 E.67775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.112 Y41.915 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y25.155 E.72952 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y25.69 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-74.336 Y42.225 E.71979 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.502 Y42.594 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y26.224 E.71257 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y26.758 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-74.609 Y43.02 E.70789 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.616 Y43.548 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y27.292 E.7076 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y27.826 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-74.388 Y44.31 E.7175 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-75.802 Y42.896 ;WIPE_END G1 X-70.623 Y48.501 Z3 F30000 G1 X-69.311 Y49.922 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y28.361 E.93853 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y28.895 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-69.845 Y49.922 E.91528 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-70.379 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y29.429 E.89203 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y29.963 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-70.913 Y49.922 E.86877 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-71.447 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y30.497 E.84552 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y31.031 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-71.981 Y49.922 E.82227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.516 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y31.566 E.79902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y32.1 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-73.05 Y49.922 E.77576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-73.584 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y32.634 E.75251 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y33.168 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-74.118 Y49.922 E.72926 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-74.652 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y33.702 E.70601 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y34.237 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-75.187 Y49.922 E.68275 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-75.721 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y34.771 E.6595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y35.305 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-76.255 Y49.922 E.63625 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-76.789 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y35.839 E.613 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y36.373 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-77.323 Y49.922 E.58975 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-77.857 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y36.907 E.56649 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y37.442 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-78.392 Y49.922 E.54324 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-78.926 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y37.976 E.51999 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y38.51 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-79.46 Y49.922 E.49674 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-79.994 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y39.044 E.47348 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y39.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-80.528 Y49.922 E.45023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-81.063 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y40.113 E.42698 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y40.647 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-85.794 Y45.725 E.22103 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-86.504 Y45.548 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y41.181 E.19012 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y41.715 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-87.06 Y45.526 E.16591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-87.544 Y45.577 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y42.249 E.14485 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y42.783 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-87.975 Y45.68 E.12609 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-88.364 Y45.825 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y43.318 E.10914 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y43.852 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-88.719 Y46.005 E.09371 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.039 Y46.219 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y44.386 E.07977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y44.92 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.327 Y46.465 E.06724 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-89.587 Y46.739 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y45.454 E.05592 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.872 Y45.989 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-89.819 Y47.041 E.04583 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-90.021 Y47.374 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-90.872 Y46.523 E.03704 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.021 Y47.374 ;WIPE_END G1 X-83.675 Y47.844 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-81.597 Y49.922 E.09045 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.131 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-83.499 Y48.554 E.05953 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-83.476 Y49.11 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-82.665 Y49.922 E.03532 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-83.199 Y49.922 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X-83.527 Y49.594 E.01426 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-83.199 Y49.922 ;WIPE_END G1 X-90.61 Y49.744 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.161417 G1 F12000 G1 X-90.635 Y49.489 E.00248 ;WIDTH:0.14478 G3 X-90.651 Y49.003 I7.413 J-.49 E.00404 G1 X-90.636 Y48.519 E.00402 ;WIDTH:0.184233 G1 X-90.612 Y48.272 E.00286 ;WIDTH:0.232118 G1 X-90.588 Y48.032 E.00371 ;WIDTH:0.276878 G1 X-90.566 Y47.899 E.00258 ;WIDTH:0.318639 G1 X-90.547 Y47.779 E.00272 ;WIDTH:0.358142 G1 X-90.527 Y47.659 E.00311 ;WIDTH:0.397645 G1 X-90.507 Y47.54 E.0035 ;WIDTH:0.435619 G3 X-90.447 Y47.276 I4.084 J.8 E.00865 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-90.507 Y47.54 ;WIPE_END G1 X-90.603 Y39.908 Z3 F30000 G1 X-91.209 Y-8.258 Z3 G1 Z2.6 G1 E.8 F1800 ;WIDTH:0.119134 G1 F12000 G1 X-91.33 Y-8.396 E.00114 ;WIDTH:0.161125 G1 X-91.451 Y-8.534 E.00177 G1 X-91.508 Y-8.744 E.00209 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-91.451 Y-8.534 G1 X-91.33 Y-8.396 ;WIPE_END G1 X-91.522 Y-11.294 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;WIDTH:0.41802 G1 F12000 G1 X-91.088 Y-12.572 E.04128 G1 X-91.522 Y-12.138 F30000 ;WIDTH:0.401723 G1 F12000 G1 X-90.244 Y-12.572 E.03949 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-91.522 Y-12.138 ;WIPE_END G1 X-87.694 Y-12.558 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;WIDTH:0.161121 G1 F12000 G1 X-87.484 Y-12.501 E.00209 G1 X-87.346 Y-12.38 E.00177 ;WIDTH:0.11913 G1 X-87.208 Y-12.259 E.00114 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-87.346 Y-12.38 ;WIPE_END G1 X-81.44 Y-7.546 Z3 F30000 G1 X-14.453 Y47.276 Z3 G1 Z2.6 G1 E.8 F1800 ;WIDTH:0.427291 G1 F12000 G1 X-14.398 Y47.515 E.00768 ;WIDTH:0.401919 G3 X-14.373 Y47.659 I-2.181 J.447 E.00429 ;WIDTH:0.358151 G1 X-14.353 Y47.779 E.00311 ;WIDTH:0.318646 G1 X-14.334 Y47.899 E.00272 ;WIDTH:0.279142 G1 X-14.314 Y48.018 E.00233 ;WIDTH:0.257538 G1 X-14.312 Y48.032 E.00025 ;WIDTH:0.232125 G1 X-14.288 Y48.272 E.00371 ;WIDTH:0.184997 G1 X-14.265 Y48.511 E.00278 ;WIDTH:0.144792 G3 X-14.249 Y48.997 I-7.384 J.489 E.00404 G1 X-14.264 Y49.481 E.00402 ;WIDTH:0.178483 G1 X-14.29 Y49.744 E.00292 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-14.264 Y49.481 ;WIPE_END G1 X-12.598 Y42.033 Z3 F30000 G1 X6.16 Y-41.79 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z3 F30000 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z3 F30000 G1 X74.198 Y15.448 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z3 F30000 G1 X90.96 Y7.29 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z3 F30000 G1 X75.04 Y16.29 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 M73 P31 R75 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X75.343 Y15.237 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.03464 G2 X76.31 Y14.326 I-1.981 J-.292 E.0306 G1 X75.788 Y13.671 E.02779 G3 X75.307 Y11.705 I1.149 J-1.323 E.07156 G2 X76.334 Y10.395 I-39.157 J-31.75 E.05523 G2 X76.31 Y9.084 I-3.314 J-.595 E.04375 G3 X75.283 Y7.774 I39.155 J-31.749 E.05523 G1 X74.313 Y7.763 E.03218 G1 X74.313 Y8.424 E.02191 G1 X77.223 Y7 F30000 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X91.178 Y7 E.1651 G1 X91.226 Y7.024 E.00064 ;WIDTH:0.260421 G1 X91.274 Y7.048 E.00096 ;WIDTH:0.308755 G1 X91.323 Y7.073 E.00117 ;WIDTH:0.346671 G1 X91.336 Y7.086 E.00048 ;WIDTH:0.374169 G1 X91.35 Y7.1 E.00052 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.24737 G1 X91.336 Y15.914 E.00055 ;WIDTH:0.346671 G1 X91.323 Y15.928 E.00048 ;WIDTH:0.308756 G1 X91.274 Y15.952 E.00117 ;WIDTH:0.260422 G1 X91.226 Y15.976 E.00096 ;WIDTH:0.212089 G1 X91.178 Y16 E.00074 ;WIDTH:0.187921 G1 X77.223 Y16 E.16489 G1 X74.15 Y15.651 F30000 ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X69.268 Y21.519 Z3 F30000 G1 X55.548 Y38.01 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z3 F30000 G1 Z2.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z3 F30000 G1 X33.195 Y38.745 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z3 F30000 G1 X3.102 Y40.648 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z3 F30000 G1 X33.602 Y39.152 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z3 F30000 G1 X2.695 Y41.055 Z3 G1 Z2.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.46 Z3 F30000 G1 X34.915 Y39.363 Z3 G1 Z2.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X33.813 Y39.363 E.03655 G1 X33.813 Y39.89 E.01746 G1 X34.249 Y40.437 E.02322 G1 X35.787 Y40.437 E.051 G1 X35.787 Y40.346 E.00301 ;LAYER_CHANGE ;Z:2.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;2.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X35.787 Y40.437 G1 X34.249 Y40.437 G1 X34.018 Y40.146 ;WIPE_END ;AFTER_LAYER_CHANGE ;2.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z3.2 I.639 J-1.035 P1 F30000 G1 X-40.819 Y-6.063 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-40.846 Y-6.016 E.00181 G3 X-43.323 Y-8.192 I-1.612 J-.663 E.2199 G3 X-42.585 Y-8.418 I.851 J1.467 E.02584 G3 X-40.774 Y-6.231 I.126 J1.739 E.11006 G1 X-40.809 Y-6.102 E.00444 G1 X-41.231 Y-6.203 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.248 Y-6.182 E.00082 G3 X-42.951 Y-7.891 I-1.21 J-.497 E.15824 G3 X-42.556 Y-7.983 I.518 J1.319 E.01252 G3 X-41.194 Y-6.343 I.098 J1.305 E.07657 G1 X-41.221 Y-6.241 E.00324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.248 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.838 Y-5.439 ;WIPE_END G1 X-44.117 Y-8.347 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-42.45 Y-9.034 I1.66 J1.664 E.06138 G1 X-42.157 Y-9.014 E.00975 G3 X-44.145 Y-8.319 I-.3 J2.332 E.41753 G1 X-44.426 Y-8.648 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.426 Y-8.656 E.00022 G3 X-42.45 Y-9.47 I1.968 J1.972 E.06738 G1 X-42.101 Y-9.447 E.01075 G3 X-44.667 Y-8.381 I-.356 J2.763 E.44857 G1 X-44.453 Y-8.619 E.00982 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.904 Y-8.125 F30000 ;TYPE:Gap infill ;WIDTH:0.241735 G1 F12000 G2 X-44.5 Y-6.68 I1.452 J1.444 E.02598 G1 X-44.482 Y-6.412 E.00434 G1 X-44.431 Y-6.156 E.00424 G1 X-44.341 Y-5.89 E.00455 G2 X-43.876 Y-8.153 I1.889 J-.792 E.16868 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.43 Y-7.211 G1 X-44.481 Y-6.954 G1 X-44.5 Y-6.68 G1 X-44.482 Y-6.412 G1 X-44.465 Y-6.324 ;WIPE_END G1 X-52.097 Y-6.363 Z3.2 F30000 G1 X-64.176 Y-6.423 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.001 G3 X-63.323 Y-8.192 I1.728 J-.228 E.06838 G3 X-62.585 Y-8.418 I.851 J1.467 E.02584 G3 X-64.142 Y-6.227 I.126 J1.739 E.26152 G1 X-64.169 Y-6.384 E.00529 G1 X-63.749 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.756 Y-6.508 E.0002 G3 X-62.951 Y-7.891 I1.297 J-.171 E.05287 G3 X-62.556 Y-7.983 I.518 J1.319 E.01252 G3 X-63.69 Y-6.237 I.098 J1.305 E.17859 G1 X-63.74 Y-6.469 E.00729 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.756 Y-6.508 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.716 Y-7.958 ;WIPE_END G1 X-62.144 Y-4.353 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-62.45 Y-9.034 I-.313 J-2.33 E.25564 G1 X-62.157 Y-9.014 E.00975 G3 X-62.104 Y-4.358 I-.3 J2.332 E.22326 G1 X-62.087 Y-3.922 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.45 Y-9.47 I-.371 J-2.762 E.28062 G1 X-62.101 Y-9.447 E.01075 G3 X-62.047 Y-3.927 I-.356 J2.763 E.24534 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.177 Y-4.652 F30000 ;TYPE:Gap infill ;WIDTH:0.241736 G1 F12000 G2 X-64.5 Y-6.68 I-.276 J-2.029 E.15189 G1 X-64.482 Y-6.412 E.00434 G1 X-64.431 Y-6.156 E.00424 G1 X-64.341 Y-5.89 E.00455 G2 X-62.216 Y-4.647 I1.889 J-.792 E.04278 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.672 Y-4.784 G1 X-61.42 Y-4.908 G1 X-61.202 Y-5.054 G1 X-61.005 Y-5.226 G1 X-60.824 Y-5.432 G1 X-60.672 Y-5.661 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z3.2 F30000 G1 X-84.095 Y24.355 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.154 Y-13.63 Z3.2 F30000 G1 X-73.062 Y44.953 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.12 Y44.937 E.00198 G3 X-73.323 Y41.808 I.662 J-1.614 E.12927 G3 X-72.585 Y41.582 I.851 J1.467 E.02584 G3 X-72.903 Y45.01 I.127 J1.74 E.20097 G1 X-73.024 Y44.966 E.00428 G1 X-72.921 Y44.539 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.534 E.00097 G3 X-72.951 Y42.109 I.494 J-1.212 E.09523 G3 X-72.556 Y42.017 I.518 J1.319 E.01252 G3 X-72.621 Y44.62 I.098 J1.305 E.13437 G1 X-72.883 Y44.549 E.00833 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.534 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.699 Y42.939 ;WIPE_END G1 X-72.757 Y45.649 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-72.45 Y40.966 I.3 J-2.332 E.23525 G1 X-72.157 Y40.986 E.00975 G3 X-72.717 Y45.654 I-.3 J2.332 E.24366 G1 X-72.813 Y46.08 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.45 Y40.53 I.356 J-2.763 E.25823 G1 X-72.101 Y40.553 E.01075 G3 X-72.774 Y46.085 I-.356 J2.763 E.26773 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.711 Y45.353 F30000 ;TYPE:Gap infill ;WIDTH:0.241742 G1 F12000 G1 X-72.45 Y45.37 E.00424 G1 X-72.189 Y45.353 E.00424 G1 X-71.919 Y45.3 E.00445 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71.005 Y44.774 E.00424 G1 X-70.824 Y44.568 E.00445 G1 X-70.672 Y44.339 E.00445 G2 X-74.5 Y43.32 I-1.779 J-1.016 E.12143 G1 X-74.482 Y43.588 E.00434 G1 X-74.428 Y43.857 E.00445 G1 X-74.344 Y44.104 E.00424 G1 X-74.228 Y44.339 E.00424 G1 X-74.076 Y44.568 E.00445 G1 X-73.895 Y44.774 E.00445 G1 X-73.698 Y44.946 E.00424 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.75 Y45.345 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.189 Y45.353 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71.005 Y44.774 G1 X-70.942 Y44.702 ;WIPE_END G1 X-63.309 Y44.752 Z3.2 F30000 G1 X-33.068 Y44.951 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.935 E.00178 G3 X-33.323 Y41.808 I.661 J-1.614 E.1292 G3 X-32.585 Y41.582 I.851 J1.467 E.02584 G3 X-32.902 Y45.008 I.127 J1.739 E.20082 G1 X-33.03 Y44.964 E.00447 G1 X-32.927 Y44.537 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.534 E.00079 G3 X-32.951 Y42.109 I.494 J-1.212 E.09523 G3 X-32.556 Y42.017 I.518 J1.319 E.01252 G3 X-32.621 Y44.62 I.098 J1.305 E.13437 G1 X-32.888 Y44.548 E.00851 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.534 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.682 Y43.76 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.749 Y43.149 G1 X-33.692 Y42.935 ;WIPE_END G1 X-32.45 Y45.668 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-32.45 Y40.966 I-.007 J-2.351 E.24544 G1 X-32.157 Y40.986 E.00975 G3 X-32.41 Y45.668 I-.3 J2.332 E.23346 G1 X-32.45 Y46.103 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.45 Y40.53 I-.007 J-2.786 E.26942 G1 X-32.101 Y40.553 E.01075 G3 X-32.41 Y46.103 I-.356 J2.763 E.25654 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241742 G1 F12000 G1 X-32.182 Y45.352 E.00434 G1 X-31.919 Y45.3 E.00434 G1 X-31.666 Y45.214 E.00434 G1 X-31.425 Y45.095 E.00434 G1 X-31.197 Y44.942 E.00445 G2 X-34.5 Y43.32 I-1.254 J-1.62 E.13448 G1 X-34.482 Y43.588 E.00434 G1 X-34.43 Y43.851 E.00434 G1 X-34.344 Y44.104 E.00434 G1 X-34.222 Y44.35 E.00445 G1 X-34.072 Y44.573 E.00434 G1 X-33.899 Y44.769 E.00424 G1 X-33.703 Y44.942 E.00424 G1 X-33.475 Y45.095 E.00445 G1 X-33.24 Y45.211 E.00424 G1 X-32.981 Y45.3 E.00445 G1 X-32.718 Y45.352 E.00434 G1 X-32.49 Y45.367 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.182 Y45.352 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.425 Y45.095 G1 X-31.197 Y44.942 G1 X-30.996 Y44.764 G1 X-30.824 Y44.568 G1 X-30.777 Y44.498 ;WIPE_END G1 X-23.146 Y44.389 Z3.2 F30000 G1 X-20.805 Y44.355 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z3.2 F30000 G1 X-82.805 Y49.645 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.895 Y42.756 Z3.2 F30000 G1 X6.16 Y-41.79 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z3.2 F30000 G1 X74.198 Y15.448 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z3.2 F30000 G1 X90.96 Y7.29 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z3.2 F30000 G1 X75.04 Y16.29 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y8.318 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y7.763 E.01841 G1 X75.391 Y7.774 E.03574 G3 X76.387 Y8.983 I-3.151 J3.611 E.0522 G1 X76.387 Y9.969 E.03271 G1 X76.227 Y10.395 E.01508 G2 X75.181 Y11.705 I2.916 J3.398 E.05593 G2 X75.992 Y13.671 I2.013 J.319 E.0742 G3 X76.387 Y14.224 I-.815 J.999 E.02283 G1 X76.387 Y15.237 E.03359 G1 X75.771 Y15.237 E.02043 G1 X77.223 Y16 F30000 ;TYPE:Gap infill ;WIDTH:0.187921 G1 F12000 G1 X91.178 Y16 E.16489 ;WIDTH:0.212089 G1 X91.226 Y15.976 E.00074 ;WIDTH:0.260422 G1 X91.274 Y15.952 E.00096 ;WIDTH:0.308756 G1 X91.323 Y15.928 E.00117 ;WIDTH:0.346671 G1 X91.336 Y15.914 E.00048 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.00055 G1 X91.35 Y7.1 E.24737 ;WIDTH:0.374169 G1 X91.336 Y7.086 E.00052 ;WIDTH:0.346671 G1 X91.323 Y7.073 E.00048 ;WIDTH:0.308755 G1 X91.274 Y7.048 E.00117 ;WIDTH:0.260421 G1 X91.226 Y7.024 E.00096 ;WIDTH:0.188109 G1 X91.178 Y7 E.00064 G1 X77.223 Y7 E.1651 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X79.223 Y7 ;WIPE_END G1 X74.591 Y13.067 Z3.2 F30000 G1 X55.548 Y38.01 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z3.2 F30000 G1 Z2.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z3.2 F30000 G1 X33.195 Y38.745 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z3.2 F30000 G1 X3.102 Y40.648 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z3.2 F30000 G1 X33.602 Y39.152 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z3.2 F30000 G1 X2.695 Y41.055 Z3.2 G1 Z2.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.461 Z3.2 F30000 G1 X35.139 Y39.363 Z3.2 G1 Z2.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X33.813 Y39.363 E.04399 G2 X34.007 Y39.877 I.377 J.151 E.02002 G3 X34.405 Y40.437 I-.825 J1.007 E.02305 G1 X35.787 Y40.437 E.04584 G1 X35.787 Y40.19 E.00817 ;LAYER_CHANGE ;Z:3 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X35.787 Y40.437 G1 X34.405 Y40.437 G1 X34.293 Y40.205 G1 X34.218 Y40.119 ;WIPE_END ;AFTER_LAYER_CHANGE ;3 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z3.4 I.638 J-1.036 P1 F30000 G1 X-40.82 Y-6.059 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-40.845 Y-6.015 E.00166 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.22007 G3 X-42.58 Y-8.418 I.851 J1.467 E.026 G3 X-40.772 Y-6.23 I.122 J1.74 E.10994 G1 X-40.81 Y-6.097 E.00458 G1 X-41.238 Y-6.201 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.276 Y-6.119 E.00279 G3 X-42.951 Y-7.891 I-1.182 J-.56 E.15612 G3 X-42.551 Y-7.984 I.517 J1.313 E.01267 G3 X-41.194 Y-6.343 I.093 J1.305 E.07642 G1 X-41.226 Y-6.239 E.00335 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.276 Y-6.119 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.843 Y-5.435 ;WIPE_END G1 X-44.114 Y-8.344 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-42.45 Y-9.034 I1.664 J1.661 E.06131 G1 X-42.143 Y-9.013 E.01021 G3 X-44.142 Y-8.315 I-.307 J2.331 E.41717 G1 X-44.426 Y-8.649 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.424 Y-8.654 E.00017 G3 X-42.814 Y-9.446 I1.969 J1.971 E.05612 G3 X-42.103 Y-9.447 I.36 J2.698 E.0219 G3 X-44.664 Y-8.379 I-.351 J2.764 E.44867 G1 X-44.453 Y-8.619 E.00982 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00434 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00435 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.698 Y-5.054 E.00435 G1 X-43.48 Y-4.908 E.00424 G1 X-43.234 Y-4.786 E.00445 G1 X-42.981 Y-4.7 E.00434 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00434 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00434 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00435 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z3.4 F30000 G1 X-64.176 Y-6.423 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00101 G3 X-63.323 Y-8.192 I1.729 J-.227 E.06839 G3 X-62.58 Y-8.418 I.851 J1.467 E.026 G3 X-64.143 Y-6.226 I.122 J1.74 E.26156 G1 X-64.169 Y-6.384 E.00529 G1 X-63.749 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.756 Y-6.508 E.0002 G3 X-62.951 Y-7.891 I1.297 J-.171 E.05288 G3 X-62.551 Y-7.984 I.517 J1.313 E.01267 G3 X-63.666 Y-6.176 I.093 J1.305 E.17643 G1 X-63.739 Y-6.469 E.00928 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.756 Y-6.508 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.716 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.351 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-62.45 Y-9.034 I-.306 J-2.331 E.2552 G1 X-62.143 Y-9.013 E.01021 G3 X-62.104 Y-4.357 I-.307 J2.331 E.22328 G1 X-62.086 Y-3.915 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.814 Y-9.446 I-.368 J-2.765 E.26949 G3 X-62.103 Y-9.447 I.36 J2.698 E.0219 G3 X-62.046 Y-3.921 I-.351 J2.767 E.24584 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00434 G1 X-61.207 Y-5.05 E.00424 G1 X-61.001 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00435 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.9 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00434 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.482 Y-6.412 E.00435 G1 X-64.431 Y-6.156 E.00424 G1 X-64.344 Y-5.896 E.00445 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00435 G1 X-62.981 Y-4.7 E.00434 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61.001 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z3.4 F30000 G1 X-84.095 Y24.355 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.154 Y-13.63 Z3.4 F30000 G1 X-73.065 Y44.952 Z3.4 M73 P31 R74 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.935 E.00188 G3 X-73.323 Y41.808 I.661 J-1.614 E.12921 G3 X-72.58 Y41.582 I.851 J1.467 E.026 G3 X-72.902 Y45.008 I.122 J1.739 E.20066 G1 X-73.027 Y44.965 E.00437 G1 X-72.925 Y44.538 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.534 E.00088 G3 X-72.951 Y42.109 I.494 J-1.212 E.09524 G3 X-72.551 Y42.016 I.517 J1.313 E.01267 G3 X-72.621 Y44.62 I.093 J1.305 E.13421 G1 X-72.886 Y44.548 E.00843 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.534 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.697 Y42.936 ;WIPE_END G1 X-72.757 Y45.648 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-72.45 Y40.966 I.307 J-2.331 E.2348 G1 X-72.143 Y40.987 E.01021 G3 X-72.717 Y45.653 I-.307 J2.331 E.24368 G1 X-72.813 Y46.081 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.814 Y40.554 I.359 J-2.763 E.24683 G3 X-72.103 Y40.553 I.36 J2.698 E.0219 G3 X-72.774 Y46.085 I-.351 J2.764 E.26801 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.24178 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00435 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00435 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00435 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.76 Z3.4 F30000 G1 X-33.069 Y44.95 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.118 Y44.933 E.00171 G3 X-32.58 Y41.582 I.667 J-1.612 E.1548 G3 X-30.805 Y42.745 I.13 J1.738 E.07567 G3 X-32.902 Y45.007 I-1.646 J.577 E.12552 G1 X-33.032 Y44.963 E.00454 G1 X-32.929 Y44.537 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.534 E.00072 G3 X-32.951 Y42.109 I.494 J-1.212 E.09524 G3 X-32.551 Y42.016 I.517 J1.313 E.01267 G3 X-32.621 Y44.62 I.093 J1.305 E.13421 G1 X-32.891 Y44.547 E.00858 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.534 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.683 Y43.755 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.716 Y42.981 G1 X-33.699 Y42.93 ;WIPE_END G1 X-32.45 Y45.669 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-32.45 Y40.966 I0 J-2.351 E.245 G1 X-32.143 Y40.987 E.01021 G3 X-32.41 Y45.668 I-.307 J2.331 E.23348 G1 X-32.45 Y46.103 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.814 Y40.554 I-.004 J-2.786 E.258 G3 X-32.103 Y40.553 I.36 J2.698 E.0219 G3 X-32.41 Y46.103 I-.351 J2.764 E.25678 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00435 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.43 Y42.789 E.00434 G1 X-34.481 Y43.046 E.00424 G1 X-34.5 Y43.32 E.00445 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00435 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z3.4 F30000 G1 X-20.805 Y44.355 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z3.4 F30000 G1 X-82.805 Y49.645 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.895 Y42.756 Z3.4 F30000 G1 X6.16 Y-41.79 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-7.36 Y-41.79 E.41543 G1 X-7.36 Y-50.21 E.25872 G1 X6.16 Y-50.21 E.41543 G1 X6.16 Y-41.83 E.25749 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.002 Y-42.052 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.79 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28412 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.595 Y-41.645 E.03682 G1 X6.595 Y-41.75 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.595 Y-43.75 ;WIPE_END G1 X8.14 Y-41.21 Z3.4 F30000 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-8.14 Y-41.21 E.50024 G1 X-8.14 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.50024 G1 X8.14 Y-41.25 E.29314 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.14 Y-41.245 ;WIPE_END G1 X6.377 Y-41.5 Z3.4 F30000 G1 Z3 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.188109 G1 F12000 G1 X-7.578 Y-41.5 E.1651 G1 X-7.626 Y-41.524 E.00064 ;WIDTH:0.260421 G1 X-7.674 Y-41.548 E.00096 ;WIDTH:0.308755 G1 X-7.723 Y-41.573 E.00117 ;WIDTH:0.346672 G1 X-7.736 Y-41.586 E.00048 ;WIDTH:0.374171 G1 X-7.75 Y-41.6 E.00052 ;WIDTH:0.38789 G1 X-7.75 Y-50.4 E.24737 G1 X-7.736 Y-50.414 E.00055 ;WIDTH:0.346672 G1 X-7.723 Y-50.427 E.00048 ;WIDTH:0.308756 G1 X-7.674 Y-50.452 E.00117 ;WIDTH:0.260422 G1 X-7.626 Y-50.476 E.00096 ;WIDTH:0.212089 G1 X-7.578 Y-50.5 E.00074 ;WIDTH:0.187921 G1 X6.377 Y-50.5 E.16489 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.377 Y-50.5 ;WIPE_END G1 X9.926 Y-45.259 Z3.4 F30000 G1 X74.198 Y15.448 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X74.605 Y17.855 ;WIPE_END G1 X81.016 Y13.713 Z3.4 F30000 G1 X90.96 Y7.29 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X90.96 Y15.71 E.25872 G1 X77.44 Y15.71 E.41543 G1 X77.44 Y7.29 E.25872 G1 X90.92 Y7.29 E.4142 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X90.93 Y9.29 ;WIPE_END G1 X83.945 Y12.367 Z3.4 F30000 G1 X75.04 Y16.29 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X91.74 Y6.71 E.56784 G1 X91.74 Y16.29 E.29437 G1 X75.08 Y16.29 E.51192 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z3.4 F30000 G1 Z3 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y8.229 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y7.763 E.01545 G1 X75.482 Y7.774 E.03877 G3 X76.387 Y8.616 I-1.994 J3.052 E.0412 G1 X76.387 Y9.953 E.04436 G1 X76.135 Y10.395 E.01687 G2 X75.115 Y11.377 I2.347 J3.457 E.04722 G1 X75.023 Y11.705 E.01129 G2 X75.482 Y13.015 I1.837 J.092 E.04723 G3 X76.387 Y13.857 I-1.994 J3.052 E.0412 G1 X76.387 Y15.237 E.04577 G1 X76.138 Y15.237 E.00824 G1 X77.223 Y16 F30000 ;TYPE:Gap infill ;WIDTH:0.187921 G1 F12000 G1 X91.178 Y16 E.16489 ;WIDTH:0.212089 G1 X91.226 Y15.976 E.00074 ;WIDTH:0.260422 G1 X91.274 Y15.952 E.00096 ;WIDTH:0.308756 G1 X91.323 Y15.928 E.00117 ;WIDTH:0.346671 G1 X91.336 Y15.914 E.00048 ;WIDTH:0.387888 G1 X91.35 Y15.9 E.00055 G1 X91.35 Y7.1 E.24737 ;WIDTH:0.374169 G1 X91.336 Y7.086 E.00052 ;WIDTH:0.346671 G1 X91.323 Y7.073 E.00048 ;WIDTH:0.308755 G1 X91.274 Y7.048 E.00117 ;WIDTH:0.260421 G1 X91.226 Y7.024 E.00096 ;WIDTH:0.188109 G1 X91.178 Y7 E.00064 G1 X77.223 Y7 E.1651 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X79.223 Y7 ;WIPE_END G1 X74.591 Y13.067 Z3.4 F30000 G1 X55.548 Y38.01 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z3.4 F30000 G1 Z3 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z3.4 F30000 G1 X33.195 Y38.745 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z3.4 F30000 G1 X3.102 Y40.648 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z3.4 F30000 G1 X33.602 Y39.152 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z3.4 F30000 G1 X2.695 Y41.055 Z3.4 G1 Z3 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.461 Z3.4 F30000 G1 X35.308 Y39.363 Z3.4 G1 Z3 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X33.813 Y39.363 E.04958 G1 X33.813 Y39.497 E.00444 G3 X34.583 Y40.437 I-.93 J1.546 E.0411 G1 X35.787 Y40.437 E.03995 G1 X35.787 Y40.013 E.01407 ;LAYER_CHANGE ;Z:3.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X35.787 Y40.437 G1 X34.583 Y40.437 G1 X34.517 Y40.205 G1 X34.435 Y40.104 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z3.6 I.636 J-1.037 P1 F30000 G1 X-40.821 Y-6.058 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-40.845 Y-6.015 E.00163 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.22007 G3 X-42.575 Y-8.418 I.851 J1.467 E.02616 G3 X-40.772 Y-6.23 I.117 J1.74 E.10978 G1 X-40.81 Y-6.097 E.00461 G1 X-41.233 Y-6.198 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.248 Y-6.182 E.00068 G3 X-42.951 Y-7.891 I-1.21 J-.497 E.15825 G3 X-42.546 Y-7.984 I.515 J1.309 E.01282 G3 X-41.194 Y-6.343 I.088 J1.305 E.07627 G1 X-41.222 Y-6.237 E.0034 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.248 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.843 Y-5.44 ;WIPE_END G1 X-44.114 Y-8.344 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-42.45 Y-9.034 I1.664 J1.661 E.06131 G1 X-42.143 Y-9.013 E.01021 G3 X-44.142 Y-8.315 I-.307 J2.331 E.41717 M73 P32 R74 G1 X-44.426 Y-8.649 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.419 Y-8.649 E.00021 G3 X-43.547 Y-9.242 I1.982 J1.974 E.0326 G3 X-42.119 Y-9.448 I1.116 J2.689 E.0448 G3 X-45.012 Y-5.583 I-.331 J2.768 E.35879 G3 X-44.659 Y-8.375 I2.575 J-1.092 E.09062 G1 X-44.452 Y-8.618 E.00982 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.13 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00434 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00434 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00434 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z3.6 F30000 G1 X-64.176 Y-6.423 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00102 G3 X-63.323 Y-8.192 I1.729 J-.227 E.06839 G3 X-62.575 Y-8.418 I.851 J1.467 E.02616 G3 X-64.143 Y-6.226 I.117 J1.74 E.26139 G1 X-64.169 Y-6.384 E.00528 G1 X-63.749 Y-6.509 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.756 Y-6.508 E.0002 G3 X-62.951 Y-7.891 I1.297 J-.171 E.05288 G3 X-62.546 Y-7.984 I.515 J1.309 E.01282 G3 X-63.666 Y-6.176 I.088 J1.305 E.17628 G1 X-63.739 Y-6.47 E.0093 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.756 Y-6.508 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.716 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.351 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-62.45 Y-9.034 I-.306 J-2.331 E.2552 G1 X-62.143 Y-9.013 E.01021 G3 X-62.104 Y-4.357 I-.307 J2.331 E.22328 G1 X-62.087 Y-3.92 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.547 Y-9.242 I-.364 J-2.762 E.24546 G3 X-62.119 Y-9.448 I1.116 J2.689 E.0448 G3 X-62.047 Y-3.926 I-.331 J2.766 E.24627 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00434 G1 X-61.207 Y-5.05 E.00424 G1 X-61.001 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00435 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.431 Y-7.204 E.00445 G1 X-64.482 Y-6.948 E.00424 G1 X-64.5 Y-6.687 E.00424 G1 X-64.481 Y-6.406 E.00455 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00435 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.9 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61.001 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z3.6 F30000 G1 X-84.095 Y24.355 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.155 Y-13.63 Z3.6 F30000 G1 X-73.067 Y44.951 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.935 E.00179 G3 X-73.323 Y41.808 I.661 J-1.614 E.12921 G3 X-72.575 Y41.582 I.851 J1.468 E.02616 G3 X-72.902 Y45.008 I.117 J1.74 E.20049 G1 X-73.03 Y44.964 E.00447 G1 X-72.928 Y44.537 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.534 E.00077 G3 X-72.951 Y42.109 I.494 J-1.212 E.09524 G3 X-72.546 Y42.016 I.515 J1.309 E.01282 G3 X-72.621 Y44.62 I.088 J1.306 E.13406 G1 X-72.889 Y44.548 E.00853 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.534 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.696 Y42.933 ;WIPE_END G1 X-72.757 Y45.652 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-72.143 Y40.987 I.311 J-2.332 E.24492 G3 X-71.841 Y45.593 I-.313 J2.334 E.21432 G3 X-72.717 Y45.657 I-.605 J-2.274 E.02932 G1 X-72.814 Y46.081 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.814 Y40.554 I.356 J-2.764 E.24704 G3 X-72.119 Y40.552 I.356 J2.638 E.02142 G3 X-72.774 Y46.086 I-.339 J2.766 E.26826 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z3.6 F30000 G1 X-33.071 Y44.949 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00166 G3 X-33.323 Y41.808 I.661 J-1.614 E.12924 G3 X-32.575 Y41.582 I.851 J1.468 E.02616 G3 X-32.903 Y45.009 I.117 J1.74 E.20057 G1 X-33.034 Y44.963 E.00461 G1 X-32.932 Y44.536 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.535 E.00066 G3 X-32.951 Y42.109 I.495 J-1.212 E.09527 G3 X-32.546 Y42.016 I.515 J1.309 E.01282 G3 X-32.621 Y44.621 I.088 J1.306 E.13412 G1 X-32.893 Y44.547 E.00866 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.535 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.661 Y43.821 G1 X-33.716 Y43.659 G1 X-33.76 Y43.32 G1 X-33.716 Y42.981 G1 X-33.698 Y42.928 ;WIPE_END G1 X-32.45 Y45.673 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-32.143 Y40.987 I.004 J-2.353 E.25513 G3 X-31.841 Y45.593 I-.313 J2.334 E.21432 G3 X-32.41 Y45.672 I-.605 J-2.274 E.01911 G1 X-32.45 Y46.108 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.547 Y40.758 I0 J-2.788 E.23443 G3 X-32.119 Y40.552 I1.116 J2.689 E.0448 G3 X-32.41 Y46.107 I-.331 J2.768 E.25767 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00435 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00434 G1 X-31.207 Y41.69 E.00445 G1 X-31.425 Y41.545 E.00424 G1 X-31.666 Y41.426 E.00434 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z3.6 F30000 G1 X-20.805 Y44.355 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z3.6 F30000 G1 X-82.805 Y49.645 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z3.6 F30000 G1 X7.002 Y-42.052 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z3.6 F30000 G1 X74.198 Y15.448 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y15.15 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y13.522 E.05401 G3 X74.814 Y11.705 I1.079 J-2.524 E.0825 G3 X74.987 Y11.05 I.546 J-.206 E.02399 G1 X76.055 Y10.395 E.04156 G1 X76.387 Y9.974 E.01776 G1 X76.387 Y8.28 E.0562 G1 X75.553 Y7.763 E.03254 G1 X74.313 Y7.763 E.04114 G1 X74.313 Y8.151 E.01288 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y7.763 G1 X75.553 Y7.763 G1 X75.869 Y7.959 ;WIPE_END G1 X71.594 Y14.282 Z3.6 F30000 G1 X55.548 Y38.01 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z3.6 F30000 G1 Z3.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z3.6 F30000 G1 X33.195 Y38.745 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z3.6 F30000 G1 X3.102 Y40.648 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z3.6 F30000 G1 X33.602 Y39.152 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z3.6 F30000 G1 X2.695 Y41.055 Z3.6 G1 Z3.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.459 Z3.6 F30000 G1 X34.013 Y39.363 Z3.6 G1 Z3.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X35.439 Y39.363 E.04731 G1 X35.425 Y39.549 E.0062 G2 X35.787 Y39.977 I.596 J-.137 E.01931 G1 X35.787 Y40.437 E.01524 G1 X34.825 Y40.437 E.03189 G2 X34.645 Y39.877 I-.483 J-.153 E.02082 G1 X33.813 Y39.367 E.03237 G1 X33.813 Y40.437 E.0355 G1 X34.371 Y40.437 E.01851 ;LAYER_CHANGE ;Z:3.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.813 Y40.437 G1 X33.813 Y39.367 G1 X34.13 Y39.561 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z3.8 I.633 J-1.04 P1 F30000 G1 X-40.822 Y-6.056 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-40.846 Y-6.016 E.00155 G3 X-43.323 Y-8.192 I-1.612 J-.663 E.21991 G3 X-42.57 Y-8.419 I.851 J1.468 E.02632 G3 X-40.774 Y-6.231 I.112 J1.74 E.10957 G1 X-40.811 Y-6.094 E.0047 G1 X-41.234 Y-6.195 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.248 Y-6.182 E.0006 G3 X-42.951 Y-7.891 I-1.211 J-.496 E.15833 G3 X-42.542 Y-7.984 I.514 J1.306 E.01297 G3 X-41.193 Y-6.343 I.083 J1.306 E.07614 G1 X-41.223 Y-6.234 E.00348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.248 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.846 Y-5.436 ;WIPE_END G1 X-44.116 Y-8.346 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-42.757 Y-9.013 I1.661 J1.663 E.05113 G3 X-42.163 Y-9.015 I.302 J2.255 E.01976 G3 X-44.144 Y-8.317 I-.292 J2.332 E.41772 G1 X-44.423 Y-8.645 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.15 Y-8.895 E.01137 G3 X-43.172 Y-9.375 I1.692 J2.215 E.03368 G3 X-42.135 Y-9.449 I.735 J2.979 E.03211 G3 X-44.459 Y-8.62 I-.323 J2.768 E.45955 G1 X-44.456 Y-8.622 E.00014 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.902 Y-8.123 F30000 ;TYPE:Gap infill ;WIDTH:0.241772 G1 F12000 G2 X-44.499 Y-6.686 I1.451 J1.446 E.02585 G1 X-44.482 Y-6.412 E.00445 G1 X-44.428 Y-6.143 E.00445 G1 X-44.344 Y-5.896 E.00424 G1 X-44.228 Y-5.661 E.00424 G1 X-44.076 Y-5.432 E.00445 G1 X-43.899 Y-5.231 E.00434 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.24 Y-4.789 E.00424 G1 X-42.981 Y-4.7 E.00445 G1 X-42.711 Y-4.647 E.00445 G1 X-42.45 Y-4.63 E.00424 G1 X-42.189 Y-4.647 E.00424 G1 X-41.919 Y-4.7 E.00445 G1 X-41.666 Y-4.786 E.00435 G1 X-41.42 Y-4.908 E.00445 G1 X-41.202 Y-5.054 E.00424 G1 X-41.005 Y-5.226 E.00424 G1 X-40.824 Y-5.432 E.00445 G1 X-40.672 Y-5.661 E.00445 G2 X-43.873 Y-8.151 I-1.779 J-1.016 E.09485 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.072 Y-7.933 G1 X-44.228 Y-7.699 G1 X-44.344 Y-7.464 G1 X-44.43 Y-7.211 G1 X-44.482 Y-6.948 G1 X-44.499 Y-6.686 G1 X-44.482 Y-6.412 G1 X-44.465 Y-6.324 ;WIPE_END G1 X-52.097 Y-6.362 Z3.8 F30000 G1 X-64.176 Y-6.423 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00101 G3 X-63.323 Y-8.192 I1.728 J-.228 E.06838 G3 X-62.57 Y-8.419 I.851 J1.468 E.02632 G3 X-64.142 Y-6.227 I.112 J1.74 E.26103 G1 X-64.169 Y-6.383 E.00528 G1 X-63.756 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.298 J-.17 E.05289 G3 X-62.542 Y-7.984 I.514 J1.306 E.01297 G3 X-63.75 Y-6.469 I.083 J1.306 E.1856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.714 Y-7.958 ;WIPE_END G1 X-62.143 Y-4.352 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-62.757 Y-9.013 I-.311 J-2.33 E.24531 G3 X-62.163 Y-9.015 I.302 J2.255 E.01976 G3 X-62.104 Y-4.357 I-.292 J2.333 E.22361 G1 X-62.086 Y-3.918 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.172 Y-9.375 I-.371 J-2.762 E.25828 G3 X-62.135 Y-9.449 I.735 J2.979 E.03211 G3 X-62.047 Y-3.924 I-.323 J2.768 E.24645 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.189 Y-4.647 F30000 ;TYPE:Gap infill ;WIDTH:0.241775 G1 F12000 G1 X-61.919 Y-4.7 E.00445 G1 X-61.666 Y-4.786 E.00435 G1 X-61.42 Y-4.908 E.00445 G1 X-61.202 Y-5.054 E.00424 G1 X-61.005 Y-5.226 E.00424 G1 X-60.824 Y-5.432 E.00445 G1 X-60.672 Y-5.661 E.00445 G2 X-64.5 Y-6.68 I-1.779 J-1.016 E.12146 G1 X-64.482 Y-6.412 E.00435 G1 X-64.428 Y-6.143 E.00445 G1 X-64.344 Y-5.896 E.00424 G1 X-64.228 Y-5.661 E.00424 G1 X-64.076 Y-5.432 E.00445 G1 X-63.899 Y-5.231 E.00434 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.24 Y-4.789 E.00424 G1 X-62.981 Y-4.7 E.00445 G1 X-62.711 Y-4.647 E.00445 G1 X-62.45 Y-4.63 E.00424 G1 X-62.229 Y-4.645 E.0036 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.42 Y-4.908 G1 X-61.202 Y-5.054 G1 X-61.005 Y-5.226 G1 X-60.824 Y-5.432 G1 X-60.672 Y-5.661 G1 X-60.641 Y-5.724 ;WIPE_END G1 X-65.334 Y.295 Z3.8 F30000 G1 X-84.095 Y24.355 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.155 Y-13.63 Z3.8 F30000 G1 X-73.07 Y44.95 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.935 E.00169 G3 X-73.323 Y41.808 I.661 J-1.614 E.12921 G3 X-72.57 Y41.581 I.851 J1.468 E.02632 G3 X-72.902 Y45.008 I.112 J1.74 E.20033 G1 X-73.032 Y44.963 E.00456 G1 X-72.931 Y44.536 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.534 E.00067 G3 X-72.951 Y42.109 I.494 J-1.212 E.09524 G3 X-72.542 Y42.016 I.514 J1.306 E.01297 G3 X-72.621 Y44.62 I.083 J1.306 E.13391 G1 X-72.892 Y44.547 E.00863 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.534 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.695 Y42.93 ;WIPE_END G1 X-72.757 Y45.651 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-72.757 Y40.987 I.302 J-2.332 E.22498 G3 X-72.163 Y40.985 I.302 J2.255 E.01976 G3 X-72.717 Y45.656 I-.292 J2.333 E.24409 G1 X-72.814 Y46.082 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.172 Y40.626 I.356 J-2.763 E.2358 G3 X-72.135 Y40.551 I.735 J2.979 E.03211 G3 X-72.774 Y46.087 I-.323 J2.768 E.26878 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.711 Y45.353 F30000 ;TYPE:Gap infill ;WIDTH:0.241776 G1 F12000 G1 X-72.45 Y45.37 E.00424 G1 X-72.189 Y45.353 E.00424 G1 X-71.919 Y45.3 E.00445 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71.005 Y44.774 E.00424 G1 X-70.824 Y44.568 E.00445 G1 X-70.672 Y44.339 E.00445 G2 X-74.5 Y43.32 I-1.779 J-1.016 E.12147 G1 X-74.482 Y43.588 E.00435 G1 X-74.428 Y43.857 E.00445 G1 X-74.344 Y44.104 E.00424 G1 X-74.228 Y44.339 E.00424 G1 X-74.076 Y44.568 E.00445 G1 X-73.895 Y44.774 E.00445 G1 X-73.698 Y44.946 E.00424 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.75 Y45.345 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.189 Y45.353 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71.005 Y44.774 G1 X-70.942 Y44.702 ;WIPE_END G1 X-63.309 Y44.751 Z3.8 F30000 G1 X-33.073 Y44.949 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00159 G3 X-33.323 Y41.808 I.661 J-1.614 E.12924 G3 X-32.57 Y41.581 I.851 J1.468 E.02632 G3 X-32.903 Y45.009 I.112 J1.741 E.2004 G1 X-33.035 Y44.962 E.00467 G1 X-32.934 Y44.535 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.533 E.00057 G3 X-32.951 Y42.109 I.494 J-1.212 E.09521 G3 X-32.542 Y42.016 I.514 J1.306 E.01297 G3 X-32.621 Y44.619 I.083 J1.306 E.13384 G1 X-32.895 Y44.546 E.00873 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.686 Y43.746 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.716 Y42.981 G1 X-33.697 Y42.926 ;WIPE_END G1 X-32.45 Y45.668 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-32.757 Y40.987 I-.005 J-2.351 E.23507 G3 X-32.163 Y40.985 I.302 J2.255 E.01976 G3 X-32.41 Y45.668 I-.292 J2.332 E.23377 G1 X-32.45 Y46.107 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.172 Y40.626 I-.007 J-2.787 E.24708 G3 X-32.135 Y40.551 I.735 J2.979 E.03211 G3 X-32.41 Y46.106 I-.323 J2.768 E.25765 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241775 G1 F12000 G1 X-32.189 Y45.353 E.00424 G1 X-31.919 Y45.3 E.00445 G1 X-31.666 Y45.214 E.00434 G1 X-31.425 Y45.095 E.00435 G1 X-31.202 Y44.946 E.00434 G1 X-31.001 Y44.769 E.00434 G1 X-30.824 Y44.568 E.00435 G1 X-30.675 Y44.345 E.00434 G1 X-30.554 Y44.098 E.00445 G1 X-30.47 Y43.851 E.00424 G1 X-30.417 Y43.581 E.00445 G1 X-30.4 Y43.32 E.00424 G1 X-30.417 Y43.059 E.00424 G1 X-30.469 Y42.796 E.00434 G1 X-30.556 Y42.536 E.00445 G1 X-30.675 Y42.295 E.00435 G1 X-30.824 Y42.072 E.00434 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00434 G1 X-31.425 Y41.545 E.00434 G1 X-31.666 Y41.426 E.00434 G1 X-31.926 Y41.339 E.00445 G2 X-34.5 Y43.313 I-.524 J1.981 E.06066 G1 X-34.482 Y43.588 E.00445 G1 X-34.43 Y43.851 E.00434 G1 X-34.344 Y44.104 E.00434 G1 X-34.225 Y44.345 E.00435 G1 X-34.076 Y44.568 E.00434 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00434 G1 X-33.469 Y45.098 E.00445 G1 X-33.228 Y45.216 E.00434 G1 X-32.981 Y45.3 E.00424 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.189 Y45.353 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.425 Y45.095 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z3.8 F30000 G1 X-20.805 Y44.355 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z3.8 F30000 G1 X-82.805 Y49.645 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z3.8 F30000 G1 X7.002 Y-42.052 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 M73 P32 R73 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z3.8 F30000 G1 X74.198 Y15.448 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.904 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y13.276 E.05401 G1 X75.809 Y13.106 E.02 G1 X75.153 Y12.625 E.02694 G1 X74.498 Y11.666 E.03853 G1 X74.313 Y11.536 E.00751 G1 X74.313 Y10.162 E.04556 G2 X74.826 Y10.664 I.928 J-.435 E.02431 G2 X76.387 Y10.061 I.057 J-2.173 E.05699 G1 X76.387 Y8.034 E.06723 G1 X75.809 Y7.864 E.02 G1 X75.671 Y7.763 E.00567 G1 X74.313 Y7.763 E.04503 G1 X74.313 Y8.034 E.00898 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y7.763 G1 X75.671 Y7.763 G1 X75.809 Y7.864 G1 X76.001 Y7.921 ;WIPE_END G1 X71.71 Y14.233 Z3.8 F30000 G1 X55.548 Y38.01 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z3.8 F30000 G1 Z3.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z3.8 F30000 G1 X33.195 Y38.745 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z3.8 F30000 G1 X3.102 Y40.648 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z3.8 F30000 G1 X33.602 Y39.152 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z3.8 F30000 G1 X2.695 Y41.055 Z3.8 G1 Z3.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.929 Y39.664 Z3.8 F30000 G1 X33.813 Y40.21 Z3.8 G1 Z3.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X33.813 Y39.363 E.02809 G3 X34.479 Y39.505 I.092 J1.202 E.02289 G2 X34.989 Y39.363 I.145 J-.466 E.01855 G1 X35.787 Y39.363 E.02648 G1 X35.787 Y40.249 E.0294 G2 X35.214 Y40.437 I-.141 J.537 E.02112 G1 X33.813 Y40.437 E.04648 G1 X33.813 Y40.21 E.00753 ;LAYER_CHANGE ;Z:3.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.813 Y40.437 G1 X35.214 Y40.437 G1 X35.462 Y40.263 G1 X35.531 Y40.26 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z4 I.631 J-1.041 P1 F30000 G1 X-40.823 Y-6.053 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X-40.84 Y-6.013 E.00144 G3 X-42.565 Y-8.419 I-1.61 J-.667 E.24588 G3 X-40.8 Y-7.241 I.115 J1.739 E.07567 G3 X-40.767 Y-6.229 I-1.65 J.561 E.03409 G1 X-40.81 Y-6.091 E.0048 G1 X-41.234 Y-6.193 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.248 Y-6.182 E.00054 G3 X-42.951 Y-7.891 I-1.21 J-.497 E.15825 G3 X-42.537 Y-7.985 I.514 J1.304 E.01312 G3 X-41.194 Y-6.343 I.078 J1.306 E.07597 G1 X-41.224 Y-6.231 E.00356 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.248 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.848 Y-5.442 ;WIPE_END G1 X-44.117 Y-8.348 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-42.757 Y-9.013 I1.659 J1.666 E.05115 G3 X-42.179 Y-9.016 I.298 J2.195 E.01924 G3 X-44.146 Y-8.319 I-.28 J2.335 E.41838 G1 X-44.425 Y-8.649 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.424 Y-8.654 E.00016 G3 X-43.518 Y-9.257 I1.967 J1.974 E.03367 G3 X-42.15 Y-9.45 I1.055 J2.541 E.04288 G3 X-44.665 Y-8.38 I-.307 J2.77 E.45027 G1 X-44.452 Y-8.619 E.00985 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.13 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00435 G1 X-44.225 Y-5.655 E.00434 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.23 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.42 Y-4.908 E.00445 G1 X-41.202 Y-5.054 E.00424 G1 X-41.001 Y-5.23 E.00434 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.678 Y-7.71 E.00445 G1 X-40.824 Y-7.928 E.00424 G1 X-41.001 Y-8.129 E.00435 G1 X-41.202 Y-8.306 E.00435 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z4 F30000 G1 X-64.176 Y-6.423 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.178 Y-6.453 E.00099 G3 X-62.565 Y-8.419 I1.728 J-.227 E.09455 G3 X-60.8 Y-7.241 I.115 J1.739 E.07567 G3 X-64.133 Y-6.229 I-1.65 J.561 E.18543 G1 X-64.167 Y-6.384 E.00525 G1 X-63.749 Y-6.509 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.756 Y-6.508 E.0002 G3 X-62.951 Y-7.891 I1.297 J-.171 E.05288 G3 X-62.537 Y-7.985 I.514 J1.304 E.01312 G3 X-63.696 Y-6.256 I.078 J1.306 E.17859 G1 X-63.741 Y-6.469 E.00671 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.756 Y-6.508 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.715 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.351 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-62.757 Y-9.013 I-.315 J-2.33 E.2456 G3 X-62.179 Y-9.016 I.298 J2.195 E.01924 G3 X-62.104 Y-4.357 I-.28 J2.335 E.22394 G1 X-62.086 Y-3.918 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.518 Y-9.257 I-.371 J-2.762 E.24702 G3 X-62.15 Y-9.45 I1.055 J2.541 E.04288 G3 X-62.047 Y-3.924 I-.307 J2.77 E.24693 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61.001 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00434 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00435 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00434 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.482 Y-6.412 E.00435 G1 X-64.431 Y-6.156 E.00424 G1 X-64.344 Y-5.896 E.00445 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.9 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61.001 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z4 F30000 G1 X-84.095 Y24.355 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.155 Y-13.63 Z4 F30000 G1 X-73.073 Y44.949 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.12 Y44.937 E.00161 G3 X-73.323 Y41.808 I.662 J-1.614 E.12927 G3 X-72.565 Y41.581 I.851 J1.468 E.02649 G3 X-72.903 Y45.01 I.107 J1.741 E.20032 G1 X-73.035 Y44.962 E.00466 G1 X-72.934 Y44.535 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.534 E.00057 G3 X-72.951 Y42.109 I.494 J-1.212 E.09524 G3 X-72.537 Y42.015 I.514 J1.304 E.01312 G3 X-72.621 Y44.62 I.078 J1.306 E.13376 G1 X-72.896 Y44.546 E.00874 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.534 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.694 Y42.927 ;WIPE_END G1 X-72.757 Y45.652 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-72.757 Y40.987 I.299 J-2.333 E.22524 G3 X-72.179 Y40.984 I.298 J2.195 E.01924 G3 X-72.717 Y45.657 I-.28 J2.335 E.24441 G1 X-72.814 Y46.085 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.518 Y40.743 I.357 J-2.764 E.22464 G3 X-72.15 Y40.55 I1.055 J2.542 E.04288 G3 X-72.774 Y46.09 I-.307 J2.77 E.2694 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z4 F30000 G1 X-33.075 Y44.948 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00152 G3 X-33.323 Y41.808 I.661 J-1.614 E.12924 G3 X-32.565 Y41.581 I.851 J1.468 E.02649 G3 X-32.903 Y45.009 I.107 J1.741 E.20024 G1 X-33.037 Y44.961 E.00474 G1 X-32.936 Y44.535 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.533 E.00049 G3 X-32.951 Y42.109 I.494 J-1.212 E.0952 G3 X-32.537 Y42.015 I.514 J1.304 E.01312 G3 X-32.621 Y44.619 I.078 J1.306 E.13369 G1 X-32.898 Y44.545 E.0088 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.688 Y43.741 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.716 Y42.981 G1 X-33.696 Y42.923 ;WIPE_END G1 X-32.45 Y45.67 Z4 F30000 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-32.757 Y40.987 I-.008 J-2.351 E.23539 G3 X-32.179 Y40.984 I.298 J2.195 E.01924 G3 X-32.41 Y45.67 I-.28 J2.335 E.23414 G1 X-32.45 Y46.108 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.518 Y40.743 I-.007 J-2.787 E.23585 G3 X-32.15 Y40.55 I1.055 J2.542 E.04288 G3 X-32.41 Y46.107 I-.307 J2.77 E.25818 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00435 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00435 G1 X-31.202 Y41.694 E.00435 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z4 F30000 G1 X-20.805 Y44.355 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z4 F30000 G1 X-82.805 Y49.645 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z4 F30000 G1 X7.002 Y-42.052 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z4 F30000 G1 X74.198 Y15.448 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z4 F30000 G1 Z3.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.726 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y13.097 E.05401 G1 X75.809 Y13.049 E.01925 G1 X75.153 Y12.708 E.0245 G2 X74.313 Y11.846 I-3.703 J2.768 E.04005 G1 X74.313 Y9.9 E.06454 G2 X74.826 Y10.373 I2.056 J-1.716 E.02319 G2 X76.387 Y10.127 I.541 J-1.644 E.05444 G1 X76.387 Y7.856 E.07534 G1 X75.723 Y7.763 E.02224 G1 X74.313 Y7.763 E.04676 G1 X74.313 Y7.982 E.00725 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y7.763 G1 X75.723 Y7.763 G1 X76.091 Y7.815 ;WIPE_END G1 X71.798 Y14.125 Z4 F30000 G1 X55.548 Y38.01 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X55.548 Y38.348 E.01121 G1 X54.552 Y38.348 E.03303 G1 X54.552 Y-13.348 E1.71485 G1 X55.548 Y-13.348 E.03303 G1 X55.548 Y37.97 E1.70231 SET_VELOCITY_LIMIT ACCEL=10000 G1 X55.955 Y38.01 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X55.955 Y38.445 E.01443 G1 X57.405 Y38.445 E.0481 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X54.145 Y38.445 E.0481 G1 X54.145 Y-13.755 E1.73157 G1 X55.955 Y-13.755 E.06004 G1 X55.955 Y37.97 E1.71581 G1 X56.39 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y38.01 E.04455 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X53.71 Y38.01 E.04455 G1 X53.71 Y-14.19 E1.60396 G1 X56.39 Y-14.19 E.08235 G1 X56.39 Y37.97 E1.60273 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P33 R73 ;WIPE_START G1 F12000 G1 X57.84 Y38.01 G1 X57.84 Y38.559 ;WIPE_END G1 X55.05 Y38.144 Z4 F30000 G1 Z3.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.631682 G1 F12000 G1 X55.05 Y-13.144 E2.46066 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X55.05 Y-11.144 ;WIPE_END G1 X51.987 Y-4.153 Z4 F30000 G1 X33.195 Y38.745 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z4 F30000 G1 X3.102 Y40.648 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z4 F30000 G1 X33.602 Y39.152 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z4 F30000 G1 X2.695 Y41.055 Z4 G1 Z3.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 ;LAYER_CHANGE ;Z:3.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;3.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END ;AFTER_LAYER_CHANGE ;3.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.2 I.884 J-.837 P1 F30000 G1 X-40.823 Y-6.05 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.845 Y-6.015 E.00137 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.21999 G3 X-42.56 Y-8.419 I.852 J1.469 E.02665 G3 X-40.773 Y-6.231 I.102 J1.741 E.10928 G1 X-40.813 Y-6.089 E.00488 G1 X-41.235 Y-6.19 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.247 Y-6.182 E.00045 G3 X-42.951 Y-7.891 I-1.211 J-.497 E.15833 G3 X-42.532 Y-7.985 I.514 J1.303 E.01327 G3 X-41.193 Y-6.343 I.074 J1.307 E.07584 G1 X-41.225 Y-6.229 E.00365 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.247 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.851 Y-5.442 ;WIPE_END G1 X-44.117 Y-8.347 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.059 Y-8.953 I1.659 J1.667 E.04091 G3 X-42.195 Y-9.017 I.618 J2.501 E.02889 G3 X-44.145 Y-8.318 I-.263 J2.337 E.41898 G1 X-44.425 Y-8.649 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.425 Y-8.655 E.00016 G3 X-43.518 Y-9.257 I1.966 J1.975 E.03368 G3 X-42.166 Y-9.451 I1.053 J2.534 E.04239 G3 X-44.666 Y-8.38 I-.292 J2.771 E.45075 G1 X-44.452 Y-8.62 E.00986 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.43 Y-7.211 E.00435 G1 X-44.481 Y-6.954 E.00424 G1 X-44.5 Y-6.68 E.00445 G1 X-44.481 Y-6.406 E.00445 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00435 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.698 Y-5.054 E.00435 G1 X-43.48 Y-4.908 E.00424 G1 X-43.234 Y-4.786 E.00445 G1 X-42.981 Y-4.7 E.00434 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00434 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00434 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00435 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.43 Y-7.211 G1 X-44.481 Y-6.954 G1 X-44.5 Y-6.68 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z4.2 F30000 G1 X-64.176 Y-6.423 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00102 G3 X-63.323 Y-8.192 I1.729 J-.227 E.06839 G3 X-62.56 Y-8.419 I.852 J1.469 E.02665 G3 X-64.142 Y-6.227 I.102 J1.741 E.26081 G1 X-64.169 Y-6.383 E.00527 G1 X-63.756 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.298 J-.17 E.05288 G3 X-62.532 Y-7.985 I.514 J1.303 E.01327 G3 X-63.75 Y-6.469 I.074 J1.307 E.18531 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.144 Y-4.352 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.059 Y-8.953 I-.314 J-2.329 E.23522 G3 X-62.195 Y-9.017 I.618 J2.501 E.02889 G3 X-62.104 Y-4.358 I-.263 J2.336 E.22441 G1 X-62.086 Y-3.918 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.518 Y-9.257 I-.372 J-2.762 E.24711 G3 X-62.166 Y-9.451 I1.053 J2.534 E.04239 G3 X-62.047 Y-3.923 I-.292 J2.771 E.24733 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00434 G1 X-61.207 Y-5.05 E.00424 G1 X-61.001 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00435 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.9 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.431 Y-7.204 E.00445 G1 X-64.482 Y-6.948 E.00424 G1 X-64.5 Y-6.687 E.00424 G1 X-64.481 Y-6.406 E.00455 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00434 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61.001 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z4.2 F30000 G1 X-84.095 Y24.355 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.156 Y-13.63 Z4.2 F30000 G1 X-73.076 Y44.948 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.936 E.00151 G3 X-73.323 Y41.808 I.661 J-1.614 E.12924 G3 X-72.56 Y41.581 I.852 J1.469 E.02665 G3 X-72.903 Y45.009 I.102 J1.741 E.20009 G1 X-73.038 Y44.961 E.00476 G1 X-72.937 Y44.534 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.952 Y44.533 E.00046 G3 X-72.951 Y42.109 I.494 J-1.211 E.0952 G3 X-72.532 Y42.015 I.514 J1.303 E.01327 G3 X-72.621 Y44.619 I.073 J1.306 E.13355 G1 X-72.899 Y44.545 E.00883 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.952 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.692 Y42.924 ;WIPE_END G1 X-72.757 Y45.653 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.059 Y41.047 I.299 J-2.333 E.21493 G3 X-72.195 Y40.983 I.618 J2.501 E.02889 G3 X-72.717 Y45.657 I-.263 J2.337 E.24496 G1 X-72.814 Y46.085 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.518 Y40.743 I.356 J-2.764 E.22468 G3 X-72.166 Y40.549 I1.053 J2.534 E.04239 G3 X-72.774 Y46.089 I-.292 J2.771 E.26975 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71.001 Y44.769 E.00434 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00435 G1 X-73.698 Y44.946 E.00434 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71.001 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z4.2 F30000 G1 X-33.077 Y44.947 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.934 E.00145 G3 X-33.323 Y41.808 I.66 J-1.613 E.12917 G3 X-32.56 Y41.581 I.852 J1.469 E.02665 G3 X-32.902 Y45.007 I.102 J1.74 E.19994 G1 X-33.039 Y44.96 E.0048 G1 X-32.939 Y44.534 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.533 E.00042 G3 X-32.951 Y42.109 I.494 J-1.211 E.0952 G3 X-32.532 Y42.015 I.514 J1.303 E.01327 G3 X-32.621 Y44.619 I.073 J1.306 E.13355 G1 X-32.9 Y44.544 E.00888 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.692 Y42.923 ;WIPE_END G1 X-32.45 Y45.669 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.059 Y41.047 I-.008 J-2.35 E.22502 G3 X-32.195 Y40.983 I.618 J2.501 E.02889 G3 X-32.41 Y45.669 I-.263 J2.336 E.23461 G1 X-32.45 Y46.107 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.518 Y40.743 I-.008 J-2.787 E.2359 G3 X-32.166 Y40.549 I1.053 J2.534 E.04239 G3 X-32.41 Y46.107 I-.292 J2.771 E.25854 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00435 G1 X-31.425 Y45.095 E.00435 G1 X-31.207 Y44.95 E.00424 G1 X-31.001 Y44.769 E.00445 G1 X-30.82 Y44.563 E.00445 G1 X-30.675 Y44.345 E.00424 G1 X-30.556 Y44.104 E.00435 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00435 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.425 Y45.095 G1 X-31.207 Y44.95 G1 X-31.001 Y44.769 G1 X-30.82 Y44.563 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z4.2 F30000 G1 X-20.805 Y44.355 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z4.2 F30000 G1 X-82.805 Y49.645 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z4.2 F30000 G1 X7.002 Y-42.052 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z4.2 F30000 G1 X74.198 Y15.448 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z4.2 F30000 G1 Z3.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y13.323 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y14.951 E.05401 G2 X74.673 Y15.237 I1.519 J-1.545 E.01528 G1 X76.387 Y15.237 E.05684 G1 X76.387 Y12.962 E.07545 G3 X75.153 Y12.802 I-.439 J-1.455 E.04251 G2 X74.313 Y12.097 I-3.724 J3.583 E.03646 G1 X74.313 Y9.71 E.07919 G1 X74.498 Y9.872 E.00817 G2 X76.387 Y10.207 I1.169 J-1.099 E.0682 G1 X76.387 Y8.579 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y10.207 G1 X76.034 Y10.325 ;WIPE_END G1 X71.819 Y16.688 Z4.2 F30000 G1 X57.405 Y38.445 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.39 Y39.047 Z4.2 F30000 G1 X33.195 Y38.745 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z4.2 F30000 G1 X3.102 Y40.648 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z4.2 F30000 G1 X33.602 Y39.152 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z4.2 F30000 G1 X2.695 Y41.055 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.503 Z4.2 F30000 G1 X33.994 Y39.544 Z4.2 G1 Z3.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.4 I.635 J-1.038 P1 F30000 G1 X-40.824 Y-6.048 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.844 Y-6.015 E.00128 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.22007 G3 X-42.555 Y-8.419 I.852 J1.47 E.02681 G3 X-40.772 Y-6.23 I.098 J1.742 E.10914 G1 X-40.813 Y-6.086 E.00497 G1 X-41.236 Y-6.188 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.248 Y-6.182 E.0004 G3 X-42.951 Y-7.891 I-1.21 J-.497 E.15824 G3 X-42.527 Y-7.985 I.514 J1.303 E.01342 G3 X-41.194 Y-6.343 I.069 J1.306 E.07568 G1 X-41.226 Y-6.226 E.00373 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.248 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.853 Y-5.443 ;WIPE_END G1 X-44.116 Y-8.346 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.351 Y-8.854 I1.659 J1.665 E.03067 G3 X-42.21 Y-9.018 I.888 J2.138 E.03862 G3 X-44.144 Y-8.317 I-.247 J2.337 E.41919 G1 X-44.425 Y-8.65 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.419 Y-8.649 E.00018 G3 X-43.604 Y-9.215 I1.969 J1.969 E.03066 G3 X-42.182 Y-9.452 I1.16 J2.575 E.04479 G3 X-44.659 Y-8.375 I-.268 J2.772 E.45101 G1 X-44.451 Y-8.619 E.00986 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.222 Y-5.65 E.00445 G1 X-44.076 Y-5.432 E.00424 G1 X-43.899 Y-5.231 E.00434 G1 X-43.594 Y-4.984 E.00637 G1 X-43.475 Y-4.905 E.00231 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00435 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z4.4 F30000 G1 X-64.176 Y-6.423 Z4.4 G1 Z4 G1 E.8 F1800 M73 P33 R72 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00103 G3 X-63.323 Y-8.192 I1.73 J-.227 E.06839 G3 X-62.555 Y-8.419 I.852 J1.47 E.02681 G3 X-64.143 Y-6.226 I.098 J1.742 E.26076 G1 X-64.169 Y-6.383 E.00527 G1 X-63.755 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.297 J-.171 E.05287 G3 X-62.527 Y-7.985 I.514 J1.303 E.01342 G3 X-63.75 Y-6.469 I.069 J1.306 E.18506 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.352 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.351 Y-8.854 I-.314 J-2.329 E.22495 G3 X-62.21 Y-9.018 I.888 J2.138 E.03862 G3 X-62.104 Y-4.357 I-.247 J2.337 E.22494 G1 X-62.086 Y-3.919 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.604 Y-9.215 I-.364 J-2.761 E.24348 G3 X-62.182 Y-9.452 I1.16 J2.575 E.04479 G3 X-62.047 Y-3.924 I-.268 J2.772 E.24815 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00434 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00434 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.481 Y-6.406 E.00445 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.594 Y-4.984 E.00637 G1 X-63.475 Y-4.905 E.00231 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z4.4 F30000 G1 X-84.095 Y24.355 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.156 Y-13.63 Z4.4 F30000 G1 X-73.078 Y44.947 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.935 E.0014 G3 X-73.323 Y41.808 I.661 J-1.614 E.1292 G3 X-72.555 Y41.581 I.852 J1.47 E.02681 G3 X-72.902 Y45.008 I.097 J1.741 E.19986 G1 X-73.041 Y44.96 E.00485 G1 X-72.941 Y44.534 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.533 E.00037 G3 X-72.951 Y42.109 I.494 J-1.212 E.09523 G3 X-72.527 Y42.015 I.514 J1.303 E.01342 G3 X-72.621 Y44.62 I.069 J1.307 E.13348 G1 X-72.902 Y44.544 E.00894 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.691 Y42.921 ;WIPE_END G1 X-72.757 Y45.653 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.351 Y41.146 I.3 J-2.332 E.20465 G3 X-72.21 Y40.982 I.888 J2.138 E.03862 G3 X-72.717 Y45.657 I-.247 J2.338 E.24549 G1 X-72.814 Y46.083 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.845 Y40.904 I.356 J-2.763 E.21334 G3 X-72.182 Y40.548 I1.403 J2.492 E.05306 G3 X-72.774 Y46.088 I-.276 J2.772 E.27018 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.9 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.313 E.00424 G1 X-74.481 Y43.594 E.00455 G1 X-74.43 Y43.851 E.00424 G1 X-74.344 Y44.104 E.00434 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z4.4 F30000 G1 X-33.079 Y44.947 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00139 G3 X-33.323 Y41.808 I.662 J-1.614 E.12923 G3 X-32.555 Y41.581 I.852 J1.47 E.02681 G3 X-32.902 Y45.009 I.098 J1.742 E.19993 G1 X-33.041 Y44.96 E.00487 G1 X-32.941 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.534 E.00036 G3 X-32.951 Y42.109 I.495 J-1.212 E.09526 G3 X-32.527 Y42.015 I.514 J1.303 E.01342 G3 X-32.621 Y44.621 I.069 J1.308 E.13355 G1 X-32.903 Y44.544 E.00896 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.534 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.691 Y42.921 ;WIPE_END G1 X-32.45 Y45.669 Z4.4 F30000 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.351 Y41.146 I-.007 J-2.35 E.21474 G3 X-32.21 Y40.982 I.888 J2.138 E.03862 G3 X-32.41 Y45.669 I-.247 J2.337 E.23512 G1 X-32.45 Y46.105 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.604 Y40.785 I0 J-2.785 E.23228 G3 X-32.182 Y40.548 I1.16 J2.575 E.04479 G3 X-32.41 Y46.105 I-.268 J2.772 E.25935 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.82 Y44.563 E.00445 G1 X-30.675 Y44.345 E.00424 G1 X-30.556 Y44.104 E.00435 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00434 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.744 Y42.191 E.00637 G1 X-30.824 Y42.072 E.00231 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00435 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.313 E.00424 G1 X-34.481 Y43.594 E.00455 G1 X-34.43 Y43.851 E.00424 G1 X-34.344 Y44.104 E.00434 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.82 Y44.563 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z4.4 F30000 G1 X-20.805 Y44.355 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z4.4 F30000 G1 X-82.805 Y49.645 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z4.4 F30000 G1 X7.002 Y-42.052 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z4.4 F30000 G1 X74.198 Y15.448 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z4.4 F30000 G1 Z4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y15.106 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.00436 G1 X74.89 Y15.237 E.04966 G2 X74.313 Y14.774 I-4.457 J4.968 E.02454 G1 X74.313 Y12.276 E.08289 G1 X74.498 Y12.429 E.00798 G2 X76.387 Y12.856 I1.243 J-1.11 E.06854 G1 X76.387 Y10.306 E.08459 G3 X75.153 Y10.214 I-.515 J-1.409 E.04229 G2 X74.313 Y9.533 I-6.562 J7.234 E.0359 G1 X74.313 Y7.905 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y9.533 G1 X74.602 Y9.767 ;WIPE_END G1 X70.677 Y16.313 Z4.4 F30000 G1 X57.405 Y38.445 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.39 Y39.047 Z4.4 F30000 G1 X33.195 Y38.745 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z4.4 F30000 G1 X3.102 Y40.648 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z4.4 F30000 G1 X33.602 Y39.152 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z4.4 F30000 G1 X2.695 Y41.055 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.503 Z4.4 F30000 G1 X33.994 Y39.544 Z4.4 G1 Z4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:4.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.6 I.635 J-1.038 P1 F30000 G1 X-40.825 Y-6.045 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.845 Y-6.015 E.0012 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.21998 G3 X-42.551 Y-8.42 I.853 J1.471 E.02697 G3 X-40.773 Y-6.231 I.093 J1.741 E.10897 G1 X-40.814 Y-6.084 E.00506 G1 X-41.237 Y-6.185 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.247 Y-6.182 E.00032 G3 X-42.951 Y-7.891 I-1.211 J-.497 E.15832 G3 X-42.522 Y-7.986 I.514 J1.304 E.01357 G3 X-41.193 Y-6.343 I.064 J1.307 E.07557 G1 X-41.226 Y-6.224 E.00381 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.247 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.856 Y-5.444 ;WIPE_END G1 X-44.116 Y-8.346 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.351 Y-8.854 I1.658 J1.667 E.03068 G3 X-42.226 Y-9.019 I.886 J2.131 E.0381 G3 X-44.144 Y-8.318 I-.232 J2.34 E.42002 G1 X-44.425 Y-8.65 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.424 Y-8.654 E.00013 G3 X-43.845 Y-9.096 I1.966 J1.975 E.02245 G3 X-42.197 Y-9.453 I1.402 J2.488 E.05258 G3 X-44.665 Y-8.38 I-.261 J2.774 E.45171 G1 X-44.451 Y-8.62 E.00988 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.68 E.00435 G1 X-44.481 Y-6.406 E.00445 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00435 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00434 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00435 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.68 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z4.6 F30000 G1 X-64.176 Y-6.422 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00103 G3 X-63.323 Y-8.192 I1.729 J-.227 E.06838 G3 X-62.551 Y-8.42 I.853 J1.471 E.02697 G3 X-64.142 Y-6.227 I.093 J1.741 E.2605 G1 X-64.169 Y-6.383 E.00526 G1 X-63.756 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.298 J-.17 E.05288 G3 X-62.522 Y-7.986 I.514 J1.304 E.01357 G3 X-63.75 Y-6.469 I.064 J1.307 E.18503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.349 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.351 Y-8.854 I-.315 J-2.33 E.22517 G3 X-62.226 Y-9.019 I.886 J2.131 E.0381 G3 X-62.103 Y-4.354 I-.232 J2.34 E.22553 G1 X-62.086 Y-3.917 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.845 Y-9.096 I-.372 J-2.762 E.23588 G3 X-62.197 Y-9.453 I1.402 J2.488 E.05258 G3 X-62.047 Y-3.922 I-.261 J2.774 E.24828 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00434 G1 X-61.207 Y-5.05 E.00424 G1 X-61 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00434 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00435 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00435 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00435 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.481 Y-6.406 E.00445 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z4.6 F30000 G1 X-84.095 Y24.355 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.156 Y-13.629 Z4.6 F30000 G1 X-73.081 Y44.946 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.935 E.00131 G3 X-73.323 Y41.808 I.661 J-1.614 E.12919 G3 X-72.551 Y41.58 I.853 J1.471 E.02697 G3 X-72.902 Y45.008 I.093 J1.741 E.1997 G1 X-73.043 Y44.959 E.00495 G1 X-72.944 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.533 E.00027 G3 X-72.951 Y42.109 I.495 J-1.212 E.09522 G3 X-72.522 Y42.014 I.514 J1.304 E.01357 G3 X-72.621 Y44.62 I.064 J1.307 E.13335 G1 X-72.905 Y44.543 E.00905 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.69 Y42.918 ;WIPE_END G1 X-72.757 Y45.651 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.351 Y41.146 I.299 J-2.331 E.20464 G3 X-72.226 Y40.981 I.886 J2.132 E.0381 G3 X-72.717 Y45.656 I-.232 J2.339 E.24582 G1 X-72.814 Y46.086 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.845 Y40.904 I.356 J-2.764 E.21347 G3 X-72.197 Y40.547 I1.402 J2.488 E.05258 G3 X-72.774 Y46.091 I-.261 J2.775 E.27074 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00434 G1 X-74.076 Y42.072 E.00435 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z4.6 F30000 G1 X-33.081 Y44.946 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00132 G3 X-33.323 Y41.808 I.662 J-1.614 E.12923 G3 X-32.551 Y41.58 I.853 J1.471 E.02697 G3 X-32.902 Y45.009 I.093 J1.742 E.19978 G1 X-33.043 Y44.959 E.00494 G1 X-32.944 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.533 E.00028 G3 X-32.951 Y42.109 I.495 J-1.212 E.09522 G3 X-32.522 Y42.014 I.514 J1.304 E.01357 G3 X-32.621 Y44.62 I.064 J1.307 E.13335 G1 X-32.905 Y44.543 E.00904 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.687 Y42.918 ;WIPE_END G1 X-32.45 Y45.672 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.351 Y41.146 I-.008 J-2.351 E.21491 G3 X-32.226 Y40.981 I.886 J2.131 E.0381 G3 X-32.41 Y45.671 I-.232 J2.339 E.23568 G1 X-32.45 Y46.108 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.845 Y40.904 I-.008 J-2.787 E.22468 G3 X-32.197 Y40.547 I1.402 J2.488 E.05258 G3 X-32.41 Y46.108 I-.261 J2.775 E.25952 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.757 Y44.468 E.00629 G1 X-30.675 Y44.345 E.00239 G1 X-30.556 Y44.104 E.00435 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00435 G1 X-31.202 Y41.694 E.00435 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.143 Y42.172 E.00629 G1 X-34.225 Y42.295 E.00239 G1 X-34.344 Y42.536 E.00435 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.78 Y44.496 ;WIPE_END G1 X-23.148 Y44.388 Z4.6 F30000 G1 X-20.805 Y44.355 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z4.6 F30000 G1 X-82.805 Y49.645 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z4.6 F30000 G1 X7.002 Y-42.052 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z4.6 F30000 G1 X74.198 Y15.448 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 M73 P34 R72 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z4.6 F30000 G1 Z4.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.961 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.00916 G1 X75.035 Y15.237 E.04485 G2 X74.313 Y14.54 I-4.44 J3.873 E.03333 G1 X74.313 Y12.458 E.06905 G2 X76.387 Y12.771 I1.188 J-.848 E.07761 G1 X76.387 Y10.431 E.07762 G1 X75.809 Y10.417 E.01919 G1 X75.153 Y10.115 E.02393 G2 X74.313 Y9.298 I-5.198 J4.507 E.03892 G1 X74.313 Y7.763 E.05092 G1 X75.031 Y7.763 E.0238 G1 X75.153 Y7.812 E.00438 G1 X76.387 Y7.763 E.04095 G1 X76.387 Y8.885 E.03721 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X75.509 Y7.798 ;WIPE_END G1 X71.627 Y14.37 Z4.6 F30000 G1 X57.405 Y38.445 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.39 Y39.047 Z4.6 F30000 G1 X33.195 Y38.745 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z4.6 F30000 G1 X3.102 Y40.648 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z4.6 F30000 G1 X33.602 Y39.152 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z4.6 F30000 G1 X2.695 Y41.055 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.503 Z4.6 F30000 G1 X33.994 Y39.544 Z4.6 G1 Z4.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:4.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z4.8 I.635 J-1.038 P1 F30000 G1 X-40.826 Y-6.043 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.845 Y-6.015 E.00111 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.21997 G3 X-42.546 Y-8.42 I.853 J1.472 E.02713 G3 X-40.773 Y-6.231 I.088 J1.742 E.10881 G1 X-40.815 Y-6.081 E.00515 G1 X-41.238 Y-6.183 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.247 Y-6.182 E.00027 G3 X-42.951 Y-7.891 I-1.211 J-.497 E.15831 G3 X-42.517 Y-7.986 I.514 J1.306 E.01372 G3 X-41.193 Y-6.343 I.06 J1.308 E.07543 G1 X-41.227 Y-6.221 E.0039 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.247 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.858 Y-5.444 ;WIPE_END G1 X-44.117 Y-8.347 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.351 Y-8.854 I1.657 J1.668 E.03068 G3 X-42.242 Y-9.02 I.884 J2.125 E.03758 G3 X-44.145 Y-8.318 I-.218 J2.341 E.42049 G1 X-44.425 Y-8.65 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.423 Y-8.653 E.0001 G3 X-44.148 Y-8.893 I1.965 J1.974 E.01122 G3 X-42.213 Y-9.454 I1.706 J2.268 E.06329 G3 X-44.664 Y-8.379 I-.245 J2.775 E.45198 G1 X-44.451 Y-8.62 E.00989 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00435 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00435 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00434 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z4.8 F30000 G1 X-64.176 Y-6.422 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00103 G3 X-63.323 Y-8.192 I1.729 J-.227 E.06838 G3 X-62.546 Y-8.42 I.853 J1.472 E.02713 G3 X-64.142 Y-6.227 I.088 J1.742 E.26034 G1 X-64.169 Y-6.383 E.00526 G1 X-63.756 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.298 J-.17 E.05287 G3 X-62.517 Y-7.986 I.514 J1.306 E.01372 G3 X-63.75 Y-6.469 I.06 J1.308 E.18489 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.349 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.351 Y-8.854 I-.316 J-2.33 E.22521 G3 X-62.242 Y-9.02 I.884 J2.125 E.03758 G3 X-62.104 Y-4.355 I-.218 J2.341 E.22596 G1 X-62.086 Y-3.919 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.371 J-2.761 E.2245 G3 X-62.213 Y-9.454 I1.706 J2.268 E.06329 G3 X-62.047 Y-3.924 I-.245 J2.775 E.24869 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.431 Y-7.204 E.00445 G1 X-64.482 Y-6.948 E.00424 G1 X-64.5 Y-6.68 E.00435 G1 X-64.482 Y-6.412 E.00435 G1 X-64.431 Y-6.156 E.00424 G1 X-64.344 Y-5.896 E.00445 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z4.8 F30000 G1 X-84.095 Y24.355 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.156 Y-13.629 Z4.8 F30000 G1 X-73.084 Y44.945 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.935 E.00121 G3 X-73.323 Y41.808 I.661 J-1.614 E.12919 G3 X-72.546 Y41.58 I.853 J1.472 E.02713 G3 X-72.902 Y45.008 I.088 J1.742 E.19955 G1 X-73.046 Y44.958 E.00505 G1 X-72.947 Y44.532 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.953 Y44.533 E.00017 G3 X-72.951 Y42.109 I.495 J-1.212 E.09521 G3 X-72.517 Y42.014 I.514 J1.306 E.01372 G3 X-72.621 Y44.62 I.06 J1.308 E.13322 G1 X-72.909 Y44.542 E.00915 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.953 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.688 Y42.915 ;WIPE_END G1 X-72.757 Y45.653 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.351 Y41.146 I.298 J-2.332 E.20478 G3 X-72.242 Y40.98 I.884 J2.126 E.03758 G3 X-72.718 Y45.658 I-.218 J2.341 E.24639 G1 X-72.814 Y46.086 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-74.148 Y41.107 I.357 J-2.764 E.20218 G3 X-72.213 Y40.546 I1.684 J2.192 E.06337 G3 X-72.774 Y46.091 I-.244 J2.776 E.27126 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71.001 Y44.769 E.00434 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00434 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71.001 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z4.8 F30000 G1 X-33.083 Y44.946 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.935 E.00125 G3 X-33.323 Y41.808 I.661 J-1.614 E.12919 G3 X-32.546 Y41.58 I.853 J1.472 E.02713 G3 X-32.902 Y45.008 I.088 J1.742 E.19955 G1 X-33.045 Y44.959 E.00501 G1 X-32.946 Y44.532 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.533 E.0002 G3 X-32.951 Y42.109 I.495 J-1.212 E.09521 G3 X-32.517 Y42.014 I.514 J1.306 E.01372 G3 X-32.621 Y44.62 I.06 J1.308 E.13322 G1 X-32.907 Y44.543 E.00911 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.661 Y43.821 G1 X-33.716 Y43.659 G1 X-33.76 Y43.32 G1 X-33.729 Y43.047 G1 X-33.689 Y42.914 ;WIPE_END G1 X-32.45 Y45.672 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.351 Y41.146 I-.009 J-2.351 E.215 G3 X-32.242 Y40.98 I.884 J2.126 E.03758 G3 X-32.41 Y45.672 I-.218 J2.341 E.23617 G1 X-32.45 Y46.106 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-34.148 Y41.107 I-.008 J-2.785 E.2133 G3 X-32.213 Y40.546 I1.706 J2.268 E.06329 G3 X-32.41 Y46.106 I-.245 J2.775 E.2599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.447 Y43.737 E.00621 G1 X-30.418 Y43.588 E.00247 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.675 Y42.295 E.00435 G1 X-30.82 Y42.077 E.00424 G1 X-31.001 Y41.871 E.00445 G1 X-31.202 Y41.694 E.00435 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00435 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.453 Y42.903 E.00621 G1 X-34.482 Y43.052 E.00247 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z4.8 F30000 G1 X-20.805 Y44.355 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z4.8 F30000 G1 X-82.805 Y49.645 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z4.8 F30000 G1 X7.002 Y-42.052 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z4.8 F30000 G1 X74.198 Y15.448 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z4.8 F30000 G1 Z4.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.868 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X76.387 Y15.237 E.01225 G1 X75.128 Y15.237 E.04177 G1 X74.498 Y14.412 E.03442 G1 X74.313 Y14.27 E.00775 G1 X74.313 Y12.686 E.05253 G2 X74.826 Y13.181 I1.175 J-.705 E.0239 G2 X76.387 Y12.701 I.262 J-1.927 E.05591 G1 X76.387 Y10.594 E.06989 G1 X75.809 Y10.464 E.01966 G1 X75.153 Y10.029 E.02608 G1 X74.498 Y9.171 E.03582 G1 X74.313 Y9.028 E.00775 G1 X74.313 Y7.763 E.04197 G1 X74.596 Y7.763 E.0094 G2 X75.153 Y7.991 I.486 J-.395 E.02082 G1 X75.809 Y7.843 E.02227 G1 X75.93 Y7.763 E.00482 G1 X76.387 Y7.763 E.01517 G1 X76.387 Y8.934 E.03884 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X75.93 Y7.763 G1 X75.809 Y7.843 G1 X75.588 Y7.893 ;WIPE_END G1 X71.684 Y14.452 Z4.8 F30000 G1 X57.405 Y38.445 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.39 Y39.047 Z4.8 F30000 G1 X33.195 Y38.745 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 M73 P34 R71 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z4.8 F30000 G1 X3.102 Y40.648 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z4.8 F30000 G1 X33.602 Y39.152 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z4.8 F30000 G1 X2.695 Y41.055 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.503 Z4.8 F30000 G1 X33.994 Y39.544 Z4.8 G1 Z4.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:4.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5 I.635 J-1.038 P1 F30000 G1 X-40.827 Y-6.04 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.844 Y-6.015 E.00102 G3 X-43.323 Y-8.192 I-1.613 J-.663 E.22006 G3 X-42.541 Y-8.42 I.854 J1.473 E.0273 G3 X-40.771 Y-6.23 I.083 J1.742 E.10869 G1 X-40.816 Y-6.079 E.00524 G1 X-41.239 Y-6.18 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.247 Y-6.182 E.00025 G3 X-42.951 Y-7.891 I-1.211 J-.497 E.15828 G3 X-42.512 Y-7.986 I.515 J1.308 E.01387 G3 X-41.192 Y-6.343 I.055 J1.308 E.07529 G1 X-41.228 Y-6.219 E.00398 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.247 Y-6.182 G1 X-41.41 Y-5.882 G1 X-41.523 Y-5.753 G1 X-41.743 Y-5.58 G1 X-41.949 Y-5.469 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.86 Y-5.445 ;WIPE_END G1 X-44.115 Y-8.345 Z5 F30000 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.627 Y-8.718 I1.657 J1.666 E.02045 G3 X-42.257 Y-9.021 I1.181 J2.095 E.04721 G3 X-44.144 Y-8.317 I-.201 J2.341 E.42075 G1 X-44.424 Y-8.65 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.423 Y-8.653 E.00009 G3 X-44.148 Y-8.893 I1.965 J1.975 E.01122 G3 X-42.229 Y-9.455 I1.683 J2.191 E.06288 G3 X-44.665 Y-8.379 I-.229 J2.777 E.45268 G1 X-44.451 Y-8.62 E.0099 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.13 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.68 E.00435 G1 X-44.481 Y-6.406 E.00445 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00435 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00435 G1 X-41.207 Y-5.05 E.00424 G1 X-41 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.68 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z5 F30000 G1 X-64.176 Y-6.422 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.187 Y-6.451 E.00104 G3 X-63.323 Y-8.192 I1.73 J-.227 E.06838 G3 X-62.541 Y-8.42 I.854 J1.473 E.0273 G3 X-64.142 Y-6.227 I.083 J1.742 E.2603 G1 X-64.169 Y-6.383 E.00526 G1 X-63.755 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.298 J-.171 E.05286 G3 X-62.512 Y-7.986 I.515 J1.308 E.01387 G3 X-63.749 Y-6.469 I.055 J1.308 E.18473 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.351 Z5 F30000 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.627 Y-8.718 I-.315 J-2.329 E.21477 G3 X-62.257 Y-9.021 I1.181 J2.095 E.04721 G3 X-62.104 Y-4.357 I-.201 J2.341 E.22642 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.372 J-2.762 E.22462 G3 X-62.229 Y-9.455 I1.683 J2.191 E.06288 G3 X-62.047 Y-3.922 I-.229 J2.777 E.24927 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00434 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00435 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00434 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.481 Y-6.406 E.00445 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.9 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z5 F30000 G1 X-84.095 Y24.355 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.157 Y-13.629 Z5 F30000 G1 X-73.087 Y44.944 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.936 E.00112 G3 X-73.323 Y41.808 I.662 J-1.614 E.12922 G3 X-72.541 Y41.58 I.854 J1.473 E.0273 G3 X-72.902 Y45.009 I.083 J1.742 E.19949 G1 X-73.049 Y44.957 E.00515 G1 X-72.95 Y44.531 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-72.952 Y44.533 E.00008 G3 X-72.951 Y42.109 I.495 J-1.212 E.09518 G3 X-72.512 Y42.014 I.515 J1.308 E.01387 G3 X-72.621 Y44.62 I.055 J1.308 E.13307 G1 X-72.912 Y44.541 E.00925 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.952 Y44.533 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.687 Y42.912 ;WIPE_END G1 X-72.757 Y45.653 Z5 F30000 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.627 Y41.282 I.299 J-2.332 E.19446 G3 X-72.257 Y40.979 I1.181 J2.095 E.04721 G3 X-72.718 Y45.658 I-.201 J2.343 E.24699 G1 X-72.814 Y46.084 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-74.148 Y41.107 I.356 J-2.763 E.20214 G3 X-72.229 Y40.545 I1.683 J2.191 E.06288 G3 X-72.774 Y46.089 I-.229 J2.776 E.27162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.24178 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z5 F30000 G1 X-33.085 Y44.945 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00119 G3 X-33.323 Y41.808 I.662 J-1.614 E.12922 G3 X-32.541 Y41.58 I.854 J1.473 E.0273 G3 X-32.902 Y45.009 I.083 J1.742 E.19949 G1 X-33.047 Y44.958 E.00508 G1 X-32.948 Y44.532 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.953 Y44.533 E.00014 G3 X-32.951 Y42.109 I.495 J-1.212 E.09519 G3 X-32.512 Y42.014 I.515 J1.308 E.01387 G3 X-32.621 Y44.62 I.055 J1.308 E.13309 G1 X-32.91 Y44.542 E.00919 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.953 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.688 Y42.914 ;WIPE_END G1 X-32.45 Y45.671 Z5 F30000 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.627 Y41.282 I-.008 J-2.35 E.20462 G3 X-32.257 Y40.979 I1.181 J2.095 E.04721 G3 X-32.41 Y45.671 I-.201 J2.342 E.23668 G1 X-32.45 Y46.109 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-34.148 Y41.107 I-.008 J-2.787 E.21341 G3 X-32.229 Y40.545 I1.683 J2.191 E.06288 G3 X-32.41 Y46.108 I-.229 J2.777 E.26049 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.425 Y45.095 E.00435 G1 X-31.207 Y44.95 E.00424 G1 X-31.001 Y44.769 E.00445 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.736 Y42.203 E.00613 G1 X-30.824 Y42.072 E.00255 G1 X-31.001 Y41.871 E.00435 G1 X-31.202 Y41.694 E.00435 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.425 Y45.095 G1 X-31.207 Y44.95 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z5 F30000 G1 X-20.805 Y44.355 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z5 F30000 G1 X-82.805 Y49.645 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z5 F30000 G1 X7.002 Y-42.052 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z5 F30000 G1 X74.198 Y15.448 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z5 F30000 G1 Z4.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y11.57 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y13.198 E.05401 G3 X74.313 Y13.536 I-.319 J.169 E.01165 G1 X74.313 Y15.237 E.05643 G1 X75.24 Y15.237 E.03074 G3 X74.735 Y14.326 I1.19 J-1.254 E.03509 G3 X74.712 Y13.671 I.607 J-.35 E.02263 G1 X75.458 Y13.343 E.02704 G2 X76.387 Y12.605 I-.583 J-1.687 E.0401 G1 X76.387 Y10.822 E.05914 G3 X74.735 Y9.084 I1.012 J-2.615 E.08218 G3 X74.712 Y8.429 I.607 J-.35 E.02263 G2 X76.032 Y7.774 I-2.438 J-6.569 E.04897 G1 X74.313 Y7.763 E.05702 G3 X74.313 Y8.294 I-1.706 J.266 E.01769 G1 X74.313 Y9.923 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y8.294 G1 X74.354 Y8.102 G1 X74.333 Y7.928 ;WIPE_END G1 X70.631 Y14.603 Z5 F30000 G1 X57.405 Y38.445 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.39 Y39.047 Z5 F30000 G1 X33.195 Y38.745 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X25.128 Y40.397 Z5 F30000 G1 X3.102 Y40.648 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.142 Y40.648 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.141 Y38.648 ;WIPE_END G1 X10.772 Y38.774 Z5 F30000 G1 X33.602 Y39.152 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X27.982 Y39.593 Z5 F30000 G1 X2.695 Y41.055 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X2.695 Y-10.855 E1.72195 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.735 Y41.055 E1.1169 G1 X2.26 Y41.49 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X2.26 Y-11.29 E1.62178 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.3 Y41.49 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X2.298 Y39.49 ;WIPE_END G1 X9.931 Y39.503 Z5 F30000 G1 X33.994 Y39.544 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.613 Y32.272 Z5 F30000 G1 X35.972 Y-7.096 Z5 G1 Z4.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.422301 G1 F12000 G1 X35.628 Y-7.439 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-6.902 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-6.559 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-6.023 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-6.366 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-5.829 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-5.486 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-4.95 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-5.293 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-4.756 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-4.413 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-3.876 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-4.22 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-3.683 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-3.34 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-2.803 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-3.147 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-2.61 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-2.267 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-1.73 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-2.074 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-1.537 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-1.194 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-.657 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-1 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-.464 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-.121 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y.416 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y.073 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y.609 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y.952 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y1.489 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y1.146 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y1.682 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y2.025 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y2.562 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y2.219 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y2.755 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y3.098 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y3.635 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y3.292 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y3.828 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y4.171 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y4.708 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y4.365 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y4.901 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y5.244 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y5.781 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y5.438 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y5.974 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y6.318 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y6.854 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y6.511 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y7.047 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y7.391 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y7.927 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y7.584 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y8.12 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y8.464 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y9 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y8.657 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y9.194 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y9.537 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y10.073 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y9.73 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y10.267 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y10.61 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y11.146 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y10.803 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y11.34 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y11.683 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y12.219 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y11.876 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y12.413 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y12.756 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y13.292 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y12.949 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y13.486 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y13.829 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y14.365 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y14.022 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y14.559 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y14.902 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y15.438 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y15.095 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y15.632 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y15.975 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y16.511 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y16.168 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y16.705 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y17.048 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y17.585 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y17.241 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y17.778 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y18.121 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y18.658 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y18.314 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y18.851 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y19.194 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y19.731 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y19.387 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y19.924 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y20.267 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y20.804 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y20.461 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y20.997 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y21.34 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y21.877 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y21.534 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y22.07 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y22.413 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y22.95 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y22.607 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y23.143 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y23.486 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y24.023 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y23.68 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y24.216 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y24.559 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y25.096 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y24.753 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y25.289 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y25.632 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y26.169 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y25.826 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y26.362 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y26.705 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y27.242 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y26.899 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y27.435 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y27.779 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y28.315 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y27.972 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y28.508 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y28.852 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y29.388 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y29.045 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y29.581 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y29.925 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y30.461 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y30.118 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y30.655 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y30.998 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y31.534 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y31.191 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y31.728 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y32.071 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y32.607 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y32.264 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y32.801 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y33.144 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y33.68 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y33.337 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y33.874 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y34.217 E.015 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y34.753 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y34.41 E.015 ;LAYER_CHANGE ;Z:4.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;4.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X35.972 Y34.753 ;WIPE_END ;AFTER_LAYER_CHANGE ;4.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.2 I.571 J-1.075 P1 F30000 G1 X-40.828 Y-6.038 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.845 Y-6.015 E.00094 G3 X-43.323 Y-8.192 I-1.613 J-.664 E.21996 G3 X-42.536 Y-8.421 I.854 J1.474 E.02746 G3 X-40.772 Y-6.23 I.079 J1.742 E.10851 G1 X-40.817 Y-6.076 E.00533 G1 X-41.246 Y-6.181 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.951 Y-7.891 I-1.211 J-.497 E.1583 G3 X-42.508 Y-7.987 I.516 J1.31 E.01402 G3 X-41.232 Y-6.219 I.05 J1.308 E.07918 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.863 Y-5.445 ;WIPE_END G1 X-44.111 Y-8.341 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.468 Y-8.797 I1.661 J1.663 E.02628 G3 X-42.273 Y-9.022 I1.018 J2.12 E.04079 G3 X-44.139 Y-8.313 I-.177 J2.344 E.42163 G1 X-44.424 Y-8.651 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.423 Y-8.653 E.00008 G3 X-44.148 Y-8.893 I1.965 J1.975 E.01122 G3 X-42.244 Y-9.456 I1.705 J2.266 E.06232 G3 X-44.665 Y-8.379 I-.214 J2.778 E.45314 G1 X-44.451 Y-8.621 E.00991 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00434 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00434 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.678 Y-7.71 E.00445 G1 X-40.824 Y-7.928 E.00424 G1 X-41.001 Y-8.129 E.00435 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z5.2 F30000 G1 X-64.175 Y-6.422 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.186 Y-6.451 E.00104 G3 X-63.323 Y-8.192 I1.729 J-.227 E.06837 G3 X-62.536 Y-8.421 I.854 J1.474 E.02746 G3 X-64.142 Y-6.227 I.079 J1.742 E.26003 G1 X-64.169 Y-6.383 E.00525 G1 X-63.755 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.298 J-.17 E.05286 G3 X-62.508 Y-7.987 I.516 J1.31 E.01402 G3 X-63.749 Y-6.469 I.05 J1.308 E.18463 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.352 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.468 Y-8.797 I-.307 J-2.329 E.22004 G3 X-62.273 Y-9.022 I1.018 J2.12 E.04079 G3 X-62.104 Y-4.357 I-.177 J2.342 E.22735 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.372 J-2.761 E.22463 G3 X-62.244 Y-9.456 I1.705 J2.266 E.06232 G3 X-62.047 Y-3.922 I-.214 J2.778 E.24972 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00434 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.481 Y-6.406 E.00445 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z5.2 F30000 G1 X-84.095 Y24.355 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.157 Y-13.629 Z5.2 F30000 G1 X-73.089 Y44.943 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.119 Y44.936 E.00102 G3 X-73.323 Y41.808 I.662 J-1.614 E.12921 G3 X-72.536 Y41.579 I.854 J1.474 E.02746 G3 X-72.902 Y45.009 I.079 J1.743 E.19934 G1 X-73.052 Y44.956 E.00524 G1 X-72.952 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.951 Y42.109 I.495 J-1.212 E.09516 G3 X-72.508 Y42.013 I.516 J1.31 E.01402 G3 X-72.915 Y44.547 I.05 J1.308 E.14228 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.686 Y42.91 ;WIPE_END G1 X-72.757 Y45.652 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.627 Y41.282 I.299 J-2.331 E.19443 G3 X-72.273 Y40.978 I1.181 J2.093 E.04669 G3 X-72.717 Y45.657 I-.185 J2.343 E.24739 G1 X-72.814 Y46.086 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-74.148 Y41.107 I.356 J-2.764 E.2022 G3 X-72.244 Y40.544 I1.683 J2.19 E.0624 G3 X-72.774 Y46.091 I-.214 J2.778 E.27216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.337 Y45.036 E.00605 G1 X-71.202 Y44.946 E.00263 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00434 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00434 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.337 Y45.036 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.711 ;WIPE_END G1 X-63.317 Y44.758 Z5.2 F30000 G1 X-33.087 Y44.944 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00112 G3 X-33.323 Y41.808 I.662 J-1.614 E.1292 G3 X-32.536 Y41.579 I.854 J1.474 E.02746 G3 X-32.902 Y45.008 I.079 J1.743 E.19932 G1 X-33.049 Y44.957 E.00514 G1 X-32.951 Y44.531 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-32.952 Y44.533 E.00009 G3 X-32.951 Y42.109 I.495 J-1.212 E.09518 G3 X-32.508 Y42.013 I.516 J1.31 E.01402 G3 X-32.621 Y44.62 I.05 J1.308 E.13297 G1 X-32.912 Y44.541 E.00926 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.952 Y44.533 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.661 Y43.821 G1 X-33.716 Y43.659 G1 X-33.76 Y43.32 G1 X-33.727 Y43.037 G1 X-33.688 Y42.91 ;WIPE_END G1 X-32.45 Y45.674 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.468 Y41.203 I0 J-2.351 E.21007 G3 X-32.273 Y40.978 I1.018 J2.12 E.04079 G3 X-32.41 Y45.673 I-.177 J2.344 E.23784 G1 X-32.45 Y46.109 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-34.148 Y41.107 I-.008 J-2.786 E.21342 G3 X-32.244 Y40.544 I1.705 J2.266 E.06232 G3 X-32.41 Y46.108 I-.214 J2.778 E.26094 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.337 Y45.036 E.00605 G1 X-31.202 Y44.946 E.00263 G1 X-31.001 Y44.769 E.00435 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.419 Y43.046 E.00445 G1 X-30.47 Y42.789 E.00424 G1 X-30.556 Y42.536 E.00434 G1 X-30.734 Y42.207 E.00605 G1 X-30.824 Y42.072 E.00263 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00434 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.313 E.00424 G1 X-34.481 Y43.594 E.00455 G1 X-34.43 Y43.851 E.00424 G1 X-34.344 Y44.104 E.00434 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.337 Y45.036 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.498 ;WIPE_END G1 X-23.145 Y44.389 Z5.2 F30000 G1 X-20.805 Y44.355 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 M73 P35 R71 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z5.2 F30000 G1 X-82.805 Y49.645 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z5.2 F30000 G1 X7.002 Y-42.052 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z5.2 F30000 G1 X74.198 Y15.448 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.55 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y15.237 E.02278 G1 X75.255 Y15.237 E.03123 G1 X75.092 Y14.981 E.01006 G1 X74.965 Y14.326 E.02214 G3 X75.288 Y13.671 I.805 J-.01 E.02515 G1 X76.109 Y13.015 E.03486 G1 X76.387 Y12.578 E.01719 G1 X76.387 Y11.123 E.04826 G1 X75.508 Y10.395 E.03787 G3 X74.965 Y9.084 I1.406 J-1.35 E.04816 G3 X75.288 Y8.429 I.805 J-.01 E.02515 G1 X76.116 Y7.763 E.03527 G1 X74.488 Y7.763 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.116 Y7.763 G1 X75.827 Y7.996 ;WIPE_END G1 X71.876 Y14.526 Z5.2 F30000 G1 X57.405 Y38.445 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.388 Y39.178 Z5.2 F30000 G1 X33.602 Y39.152 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z5.2 F30000 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z5.2 F30000 G1 X35.602 Y-10.448 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z5.2 F30000 G1 X3.498 Y40.648 Z5.2 G1 Z4.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:5 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;5 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.4 I.853 J-.868 P1 F30000 G1 X-40.829 Y-6.035 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.846 Y-6.016 E.00087 G3 X-43.118 Y-8.293 I-1.614 J-.663 E.22775 G3 X-42.531 Y-8.421 I.686 J1.744 E.02002 G3 X-40.774 Y-6.231 I.071 J1.743 E.10827 G1 X-40.818 Y-6.074 E.00542 G1 X-41.246 Y-6.181 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.951 Y-7.891 I-1.211 J-.498 E.15829 G3 X-42.503 Y-7.987 I.517 J1.314 E.01417 G3 X-41.231 Y-6.218 I.046 J1.308 E.07905 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-42.111 Y-5.414 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.862 Y-5.445 ;WIPE_END G1 X-44.116 Y-8.346 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.627 Y-8.718 I1.657 J1.667 E.02045 G3 X-42.289 Y-9.023 I1.18 J2.092 E.04617 G3 X-44.144 Y-8.317 I-.17 J2.345 E.422 G1 X-44.424 Y-8.651 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.423 Y-8.653 E.00007 G3 X-44.148 Y-8.893 I1.965 J1.975 E.01122 G3 X-42.26 Y-9.457 I1.682 J2.189 E.06191 G3 X-44.665 Y-8.379 I-.198 J2.779 E.45361 G1 X-44.45 Y-8.621 E.00992 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.13 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.43 Y-7.211 E.00434 G1 X-44.481 Y-6.954 E.00424 G1 X-44.5 Y-6.68 E.00445 G1 X-44.481 Y-6.406 E.00445 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.225 Y-5.655 E.00435 G1 X-44.08 Y-5.437 E.00424 G1 X-43.899 Y-5.231 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00435 G1 X-41.207 Y-5.05 E.00424 G1 X-41 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.43 Y-7.211 G1 X-44.481 Y-6.954 G1 X-44.5 Y-6.68 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z5.4 F30000 G1 X-64.175 Y-6.422 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.189 Y-6.451 E.00107 G3 X-63.118 Y-8.293 I1.73 J-.227 E.07605 G3 X-62.531 Y-8.421 I.686 J1.744 E.02002 G3 X-64.145 Y-6.226 I.071 J1.743 E.25989 G1 X-64.169 Y-6.382 E.00526 G1 X-63.755 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.951 Y-7.891 I1.298 J-.17 E.05285 G3 X-62.503 Y-7.987 I.517 J1.314 E.01417 G3 X-63.749 Y-6.469 I.046 J1.308 E.1845 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.76 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.105 Y-7.815 G1 X-62.951 Y-7.891 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.349 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.627 Y-8.718 I-.315 J-2.33 E.21492 G3 X-62.289 Y-9.023 I1.18 J2.092 E.04617 G3 X-62.104 Y-4.354 I-.17 J2.345 E.22753 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.372 J-2.761 E.22464 G3 X-62.26 Y-9.457 I1.682 J2.189 E.06191 G3 X-62.047 Y-3.922 I-.198 J2.779 E.25019 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00434 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00435 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00435 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.431 Y-7.204 E.00445 G1 X-64.482 Y-6.948 E.00424 G1 X-64.5 Y-6.687 E.00424 G1 X-64.481 Y-6.406 E.00455 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.222 Y-5.65 E.00445 G1 X-64.076 Y-5.432 E.00424 G1 X-63.9 Y-5.231 E.00434 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z5.4 F30000 G1 X-84.095 Y24.355 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.157 Y-13.629 Z5.4 F30000 G1 X-73.092 Y44.942 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.12 Y44.937 E.00093 G3 X-73.118 Y41.707 I.66 J-1.615 E.13695 G3 X-72.531 Y41.579 I.686 J1.744 E.02002 G3 X-72.903 Y45.009 I.071 J1.743 E.19902 G1 X-73.054 Y44.956 E.00534 G1 X-72.952 Y44.532 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.951 Y42.109 I.495 J-1.211 E.09512 G3 X-72.503 Y42.013 I.517 J1.314 E.01417 G3 X-72.915 Y44.546 I.046 J1.308 E.14209 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.686 Y42.91 ;WIPE_END G1 X-72.757 Y45.652 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.627 Y41.282 I.298 J-2.331 E.19445 G3 X-72.289 Y40.977 I1.18 J2.093 E.04617 G3 X-72.717 Y45.657 I-.17 J2.344 E.24789 G1 X-72.814 Y46.087 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-74.148 Y41.107 I.356 J-2.764 E.20224 G3 X-72.26 Y40.543 I1.682 J2.189 E.06191 G3 X-72.775 Y46.092 I-.198 J2.78 E.27268 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.169 Y44.429 E.00597 G1 X-74.076 Y44.568 E.00271 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.758 Z5.4 F30000 G1 X-33.088 Y44.944 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.12 Y44.937 E.00106 G3 X-33.118 Y41.707 I.66 J-1.615 E.13695 G3 X-32.531 Y41.579 I.686 J1.744 E.02002 G3 X-32.903 Y45.009 I.071 J1.743 E.19902 G1 X-33.051 Y44.957 E.00521 G1 X-32.952 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.951 Y42.109 I.496 J-1.212 E.09516 G3 X-32.503 Y42.013 I.517 J1.314 E.01417 G3 X-32.915 Y44.547 I.046 J1.308 E.14219 M73 P35 R70 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.685 Y42.909 ;WIPE_END G1 X-32.45 Y45.673 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.627 Y41.282 I-.008 J-2.351 E.20471 G3 X-32.289 Y40.977 I1.18 J2.092 E.04617 G3 X-32.41 Y45.672 I-.17 J2.345 E.23774 G1 X-32.45 Y46.109 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-34.148 Y41.107 I-.008 J-2.786 E.21343 G3 X-32.26 Y40.543 I1.682 J2.189 E.06191 G3 X-32.41 Y46.108 I-.198 J2.779 E.2614 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00435 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z5.4 F30000 G1 X-20.805 Y44.355 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z5.4 F30000 G1 X-82.805 Y49.645 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z5.4 F30000 G1 X7.002 Y-42.052 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z5.4 F30000 G1 X74.198 Y15.448 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z5.4 F30000 G1 Z5 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F13184.75 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X70.032 Y20.92 Z5.4 F30000 G1 X57.405 Y38.445 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.388 Y39.178 Z5.4 F30000 G1 X33.602 Y39.152 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z5.4 F30000 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z5.4 F30000 G1 X35.602 Y-10.448 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z5.4 F30000 G1 X3.498 Y40.648 Z5.4 G1 Z5 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:5.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.6 I.852 J-.869 P1 F30000 G1 X-40.847 Y-5.99 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.945 Y-5.811 E.00675 G3 X-43.118 Y-8.293 I-1.514 J-.867 E.2202 G3 X-42.526 Y-8.421 I.687 J1.747 E.02018 G3 X-40.84 Y-6.029 I.067 J1.743 E.1152 G1 X-41.249 Y-6.183 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.211 J-.497 E.16363 G3 X-42.498 Y-7.987 I.303 J1.086 E.00907 G3 X-41.235 Y-6.22 I.038 J1.308 E.07875 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.864 Y-5.44 ;WIPE_END G1 X-44.116 Y-8.346 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.627 Y-8.718 I1.657 J1.667 E.02045 G3 X-42.304 Y-9.024 I1.181 J2.093 E.04565 G3 X-44.144 Y-8.317 I-.154 J2.346 E.42252 G1 X-44.424 Y-8.651 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-44.418 Y-8.648 E.00019 G3 X-42.276 Y-9.458 I1.968 J1.968 E.07253 G3 X-42.985 Y-3.948 I-.169 J2.779 E.28029 G3 X-44.658 Y-8.375 I.535 J-2.732 E.17378 G1 X-44.45 Y-8.621 E.00992 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.43 Y-7.211 E.00435 G1 X-44.481 Y-6.954 E.00424 G1 X-44.5 Y-6.68 E.00445 G1 X-44.481 Y-6.406 E.00445 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.222 Y-5.65 E.00445 G1 X-44.076 Y-5.432 E.00424 G1 X-43.899 Y-5.231 E.00435 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.42 Y-4.908 E.00445 G1 X-41.202 Y-5.054 E.00424 G1 X-41.001 Y-5.231 E.00434 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00434 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.43 Y-7.211 G1 X-44.481 Y-6.954 G1 X-44.5 Y-6.68 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z5.6 F30000 G1 X-64.175 Y-6.422 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.189 Y-6.451 E.00107 G3 X-63.118 Y-8.293 I1.73 J-.227 E.07604 G3 X-62.526 Y-8.421 I.687 J1.747 E.02018 G3 X-64.144 Y-6.226 I.067 J1.743 E.25975 G1 X-64.169 Y-6.382 E.00525 G1 X-63.758 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.789 Y-7.946 I1.298 J-.171 E.05822 G3 X-62.498 Y-7.987 I.303 J1.086 E.00907 G3 X-63.752 Y-6.469 I.038 J1.308 E.18417 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.349 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.627 Y-8.718 I-.315 J-2.33 E.21492 G3 X-62.304 Y-9.024 I1.181 J2.093 E.04565 G3 X-62.104 Y-4.354 I-.154 J2.346 E.22804 G1 X-62.086 Y-3.918 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.985 Y-3.948 I-.358 J-2.761 E.02776 G3 X-62.276 Y-9.458 I.535 J-2.732 E.25751 G3 X-62.047 Y-3.924 I-.169 J2.779 E.2513 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.42 Y-4.908 E.00445 G1 X-61.202 Y-5.054 E.00424 G1 X-61.001 Y-5.231 E.00435 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00435 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.481 Y-6.406 E.00445 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.222 Y-5.65 E.00445 G1 X-64.076 Y-5.432 E.00424 G1 X-63.899 Y-5.231 E.00434 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.42 Y-4.908 G1 X-61.202 Y-5.054 G1 X-61.001 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z5.6 F30000 G1 X-84.095 Y24.355 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.158 Y-13.629 Z5.6 F30000 G1 X-73.095 Y44.941 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.12 Y44.937 E.00084 G3 X-73.118 Y41.707 I.66 J-1.615 E.13693 G3 X-72.526 Y41.579 I.687 J1.747 E.02018 G3 X-72.903 Y45.009 I.067 J1.743 E.19888 G1 X-73.057 Y44.955 E.00544 G1 X-72.953 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.789 Y42.054 I.493 J-1.213 E.1006 G3 X-72.498 Y42.013 I.303 J1.085 E.00907 G3 X-72.915 Y44.548 I.038 J1.308 E.14179 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.686 Y42.91 ;WIPE_END G1 X-72.757 Y45.653 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.627 Y41.282 I.299 J-2.332 E.19449 G3 X-72.304 Y40.976 I1.181 J2.093 E.04565 G3 X-72.718 Y45.658 I-.154 J2.346 E.24847 G1 X-72.814 Y46.085 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-74.003 Y41.01 I.365 J-2.763 E.2071 G3 X-72.276 Y40.542 I1.52 J2.188 E.05608 G3 X-72.774 Y46.09 I-.173 J2.781 E.27367 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71.001 Y44.769 E.00434 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00434 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00434 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71.001 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.759 Z5.6 F30000 G1 X-33.079 Y44.947 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.12 Y44.937 E.00139 G3 X-33.118 Y41.707 I.66 J-1.615 E.13693 G3 X-32.526 Y41.579 I.687 J1.747 E.02018 G3 X-32.903 Y45.009 I.067 J1.743 E.19888 G1 X-33.041 Y44.96 E.00488 G1 X-32.93 Y44.527 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.108 Y44.459 E.00585 G3 X-32.789 Y42.054 I.648 J-1.138 E.09534 G3 X-32.498 Y42.013 I.303 J1.085 E.00907 G3 X-32.79 Y44.588 I.038 J1.309 E.13779 G1 X-32.893 Y44.543 E.00346 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.108 Y44.459 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.661 Y43.821 G1 X-33.74 Y43.538 G1 X-33.76 Y43.32 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.694 Y42.928 ;WIPE_END G1 X-32.45 Y45.674 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.627 Y41.282 I-.008 J-2.351 E.20476 G3 X-32.304 Y40.976 I1.181 J2.093 E.04565 G3 X-32.41 Y45.673 I-.154 J2.346 E.23832 G1 X-32.45 Y46.104 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-34.003 Y41.01 I0 J-2.784 E.21808 G3 X-32.276 Y40.542 I1.52 J2.188 E.05608 G3 X-32.41 Y46.103 I-.174 J2.778 E.26212 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.77 Y44.488 E.0059 G1 X-30.675 Y44.345 E.00279 G1 X-30.556 Y44.104 E.00435 G1 X-30.451 Y43.756 E.0059 G1 X-30.418 Y43.588 E.00278 G1 X-30.4 Y43.32 E.00435 G1 X-30.436 Y42.958 E.0059 G1 X-30.47 Y42.789 E.00279 G1 X-30.556 Y42.536 E.00435 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00435 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00435 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.172 Y44.425 E.0059 G1 X-34.076 Y44.568 E.00279 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.778 Y44.497 ;WIPE_END G1 X-23.146 Y44.388 Z5.6 F30000 G1 X-20.805 Y44.355 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z5.6 F30000 G1 X-82.805 Y49.645 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z5.6 F30000 G1 X7.002 Y-42.052 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z5.6 F30000 G1 X74.198 Y15.448 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F13184.75 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X70.032 Y20.92 Z5.6 F30000 G1 X57.405 Y38.445 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.388 Y39.178 Z5.6 F30000 G1 X33.602 Y39.152 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z5.6 F30000 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z5.6 F30000 G1 X35.602 Y-10.448 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z5.6 F30000 G1 X3.498 Y40.648 Z5.6 G1 Z5.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:5.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z5.8 I.852 J-.869 P1 F30000 G1 X-40.848 Y-5.988 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.946 Y-5.811 E.0067 G3 X-43.118 Y-8.293 I-1.513 J-.867 E.22013 G3 X-42.521 Y-8.422 I.688 J1.75 E.02034 G3 X-40.841 Y-6.027 I.062 J1.743 E.1151 G1 X-41.248 Y-6.182 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.211 J-.497 E.16367 G3 X-42.493 Y-7.988 I.307 J1.104 E.00922 G3 X-41.233 Y-6.219 I.034 J1.309 E.07866 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.864 Y-5.44 ;WIPE_END G1 X-44.116 Y-8.346 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.627 Y-8.718 I1.657 J1.667 E.02045 G3 X-42.32 Y-9.025 I1.181 J2.095 E.04513 G3 X-44.144 Y-8.317 I-.139 J2.346 E.42293 G1 X-44.423 Y-8.653 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-44.148 Y-8.893 I1.965 J1.976 E.01122 G3 X-42.291 Y-9.459 I1.682 J2.189 E.06095 G3 X-44.451 Y-8.625 I-.167 J2.782 E.46467 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00434 G1 X-44.222 Y-5.65 E.00445 G1 X-44.076 Y-5.432 E.00424 G1 X-43.899 Y-5.231 E.00434 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00435 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.231 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00434 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.725 Y-7.781 E.00582 G1 X-40.824 Y-7.928 E.00286 G1 X-41.001 Y-8.129 E.00435 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z5.8 F30000 G1 X-64.175 Y-6.422 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.188 Y-6.451 E.00107 G3 X-63.118 Y-8.293 I1.729 J-.227 E.07603 G3 X-62.521 Y-8.422 I.688 J1.75 E.02034 G3 X-64.144 Y-6.226 I.062 J1.743 E.25954 G1 X-64.169 Y-6.382 E.00524 G1 X-63.757 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.789 Y-7.946 I1.298 J-.171 E.05821 G3 X-62.493 Y-7.988 I.307 J1.104 E.00922 G3 X-63.751 Y-6.469 I.034 J1.309 E.18413 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.957 ;WIPE_END G1 X-62.143 Y-4.349 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.627 Y-8.718 I-.315 J-2.33 E.21492 G3 X-62.32 Y-9.025 I1.181 J2.095 E.04513 G3 X-62.104 Y-4.354 I-.139 J2.347 E.22857 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.372 J-2.761 E.22464 G3 X-62.291 Y-9.459 I1.682 J2.189 E.06095 G3 X-62.047 Y-3.922 I-.167 J2.781 E.25115 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.725 Y-7.781 E.00582 G1 X-60.824 Y-7.928 E.00286 G1 X-61.001 Y-8.129 E.00435 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.431 Y-7.204 E.00445 G1 X-64.482 Y-6.948 E.00424 G1 X-64.5 Y-6.687 E.00424 G1 X-64.481 Y-6.406 E.00455 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.9 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.284 Z5.8 F30000 G1 X-84.095 Y24.355 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.162 Y-13.628 Z5.8 F30000 G1 X-73.14 Y44.923 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.325 Y44.836 E.0068 G3 X-73.118 Y41.707 I.866 J-1.514 E.12929 G3 X-72.521 Y41.578 I.688 J1.75 E.02034 G3 X-73.105 Y44.942 I.062 J1.743 E.20577 G1 X-72.953 Y44.534 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.789 Y42.054 I.494 J-1.213 E.10058 G3 X-72.493 Y42.012 I.307 J1.103 E.00922 G3 X-72.916 Y44.548 I.034 J1.309 E.14176 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.686 Y42.91 ;WIPE_END G1 X-72.757 Y45.653 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.627 Y41.282 I.299 J-2.332 E.19449 G3 X-72.32 Y40.975 I1.181 J2.095 E.04513 G3 X-72.718 Y45.658 I-.139 J2.347 E.249 G1 X-72.814 Y46.086 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-74.148 Y41.107 I.356 J-2.764 E.20221 G3 X-72.291 Y40.541 I1.682 J2.189 E.06095 G3 X-72.774 Y46.091 I-.167 J2.781 E.27359 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.349 Y45.045 E.00582 G1 X-71.202 Y44.946 E.00286 G1 X-71.001 Y44.769 E.00434 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00434 G1 X-74.076 Y42.072 E.00435 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00435 G1 X-73.698 Y44.946 E.00434 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.349 Y45.045 G1 X-71.202 Y44.946 G1 X-71.001 Y44.769 G1 X-70.95 Y44.711 ;WIPE_END G1 X-63.317 Y44.758 Z5.8 F30000 G1 X-33.092 Y44.942 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.119 Y44.936 E.00093 G3 X-33.118 Y41.707 I.66 J-1.614 E.13689 G3 X-32.521 Y41.578 I.688 J1.75 E.02034 G3 X-32.902 Y45.008 I.062 J1.743 E.19871 G1 X-33.054 Y44.955 E.00534 G1 X-32.953 Y44.534 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.789 Y42.054 I.494 J-1.213 E.10058 G3 X-32.493 Y42.012 I.307 J1.104 E.00922 G3 X-32.916 Y44.548 I.034 J1.309 E.14176 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.686 Y42.91 ;WIPE_END G1 X-32.45 Y45.671 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.627 Y41.282 I-.009 J-2.35 E.20466 G3 X-32.32 Y40.975 I1.181 J2.095 E.04513 G3 X-32.41 Y45.671 I-.139 J2.346 E.23872 G1 X-32.45 Y46.105 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.291 Y40.541 I0 J-2.784 E.27366 G3 X-29.724 Y42.754 I-.159 J2.78 E.11196 G3 X-32.41 Y46.104 I-2.726 J.567 E.15067 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00435 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.725 Y42.219 E.00582 G1 X-30.824 Y42.072 E.00286 G1 X-31.001 Y41.871 E.00435 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.175 Y44.421 E.00582 G1 X-34.076 Y44.568 E.00286 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-23.146 Y44.389 Z5.8 F30000 G1 X-20.805 Y44.355 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z5.8 F30000 G1 X-82.805 Y49.645 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 M73 P36 R70 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z5.8 F30000 G1 X7.002 Y-42.052 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z5.8 F30000 G1 X74.198 Y15.448 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F13184.75 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X70.032 Y20.92 Z5.8 F30000 G1 X57.405 Y38.445 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.388 Y39.178 Z5.8 F30000 G1 X33.602 Y39.152 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z5.8 F30000 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z5.8 F30000 G1 X35.602 Y-10.448 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z5.8 F30000 G1 X3.498 Y40.648 Z5.8 G1 Z5.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:5.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6 I.852 J-.869 P1 F30000 G1 X-40.849 Y-5.987 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-40.945 Y-5.811 E.00664 G3 X-43.118 Y-8.293 I-1.513 J-.867 E.2201 G3 X-42.517 Y-8.422 I.689 J1.753 E.0205 G3 X-40.841 Y-6.026 I.058 J1.743 E.11501 G1 X-41.247 Y-6.182 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.211 J-.497 E.16365 G3 X-42.488 Y-7.988 I.311 J1.123 E.00937 G3 X-41.232 Y-6.219 I.03 J1.309 E.07856 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.864 Y-5.439 ;WIPE_END G1 X-44.116 Y-8.346 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-43.627 Y-8.718 I1.657 J1.667 E.02045 G3 X-42.336 Y-9.026 I1.183 J2.099 E.04461 G3 X-44.144 Y-8.317 I-.123 J2.348 E.42358 G1 X-44.423 Y-8.653 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-44.148 Y-8.893 I1.965 J1.975 E.01122 G3 X-42.307 Y-9.46 I1.682 J2.189 E.06047 G3 X-44.451 Y-8.625 I-.151 J2.782 E.46507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00435 G1 X-44.225 Y-5.655 E.00435 G1 X-44.129 Y-5.511 E.00281 G1 X-43.899 Y-5.23 E.00587 G1 X-43.698 Y-5.054 E.00434 G1 X-43.48 Y-4.908 E.00424 G1 X-43.234 Y-4.786 E.00445 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.42 Y-4.908 E.00445 G1 X-41.202 Y-5.054 E.00424 G1 X-41.001 Y-5.231 E.00434 G1 X-40.776 Y-5.504 E.00574 G1 X-40.675 Y-5.655 E.00294 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.418 Y-6.948 E.00435 G1 X-40.469 Y-7.204 E.00424 G1 X-40.556 Y-7.464 E.00445 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z6 F30000 G1 X-64.175 Y-6.421 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-64.188 Y-6.451 E.00107 G3 X-63.118 Y-8.293 I1.729 J-.228 E.07602 G3 X-62.517 Y-8.422 I.689 J1.753 E.0205 G3 X-64.143 Y-6.226 I.058 J1.743 E.2594 G1 X-64.169 Y-6.382 E.00523 G1 X-63.756 Y-6.508 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.789 Y-7.946 I1.298 J-.171 E.05819 G3 X-62.488 Y-7.988 I.311 J1.123 E.00937 G3 X-63.751 Y-6.469 I.03 J1.309 E.18402 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.956 ;WIPE_END G1 X-62.143 Y-4.349 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-63.627 Y-8.718 I-.315 J-2.33 E.21491 G3 X-62.336 Y-9.026 I1.183 J2.099 E.04461 G3 X-62.103 Y-4.354 I-.123 J2.348 E.22912 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.372 J-2.761 E.22463 G3 X-62.307 Y-9.46 I1.682 J2.189 E.06047 G3 X-62.047 Y-3.922 I-.151 J2.782 E.25165 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61.001 Y-5.231 E.00445 G1 X-60.776 Y-5.504 E.00574 G1 X-60.675 Y-5.655 E.00294 G1 X-60.556 Y-5.896 E.00435 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.418 Y-6.948 E.00435 G1 X-60.469 Y-7.204 E.00424 G1 X-60.556 Y-7.464 E.00445 G1 X-60.678 Y-7.71 E.00445 G1 X-60.824 Y-7.928 E.00424 G1 X-61.001 Y-8.129 E.00435 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00435 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.43 Y-7.211 E.00434 G1 X-64.481 Y-6.954 E.00424 G1 X-64.5 Y-6.68 E.00445 G1 X-64.481 Y-6.406 E.00445 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61.001 Y-5.231 G1 X-60.776 Y-5.504 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-65.328 Y.283 Z6 F30000 G1 X-84.095 Y24.355 Z6 M73 P36 R69 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-84.805 Y24.355 E.02355 G1 X-84.805 Y-23.355 E1.58263 G1 X-84.095 Y-23.355 E.02355 G1 X-84.095 Y24.315 E1.5813 G1 X-83.66 Y24.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-85.24 Y24.79 E.04855 G1 X-85.24 Y-23.79 E1.49273 G1 X-83.66 Y-23.79 E.04855 G1 X-83.66 Y24.75 E1.4915 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-84.45 Y24.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-84.45 Y-23.151 E1.16764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-84.45 Y-21.151 ;WIPE_END G1 X-83.162 Y-13.628 Z6 F30000 G1 X-73.141 Y44.922 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-73.325 Y44.836 E.00673 G3 X-73.118 Y41.707 I.867 J-1.514 E.12929 G3 X-72.517 Y41.578 I.689 J1.753 E.0205 G3 X-73.107 Y44.942 I.058 J1.744 E.20577 G1 X-72.952 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.789 Y42.054 I.494 J-1.212 E.1005 G3 X-72.488 Y42.012 I.311 J1.122 E.00937 G3 X-72.915 Y44.547 I.03 J1.308 E.14159 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.105 Y44.455 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.585 Y43.975 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.686 Y42.91 ;WIPE_END G1 X-72.757 Y45.653 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-73.627 Y41.282 I.299 J-2.332 E.19448 G3 X-72.336 Y40.974 I1.183 J2.099 E.04461 G3 X-72.718 Y45.658 I-.123 J2.348 E.24955 G1 X-72.813 Y46.08 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.955 Y46.058 I.369 J-2.76 E.00439 G3 X-72.307 Y40.54 I.505 J-2.738 E.25752 G3 X-72.774 Y46.085 I-.138 J2.781 E.27467 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00434 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.899 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00434 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.758 Z6 F30000 G1 X-33.094 Y44.942 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-33.12 Y44.936 E.00087 G3 X-33.118 Y41.707 I.661 J-1.615 E.13689 G3 X-32.516 Y41.578 I.689 J1.753 E.02051 G3 X-32.903 Y45.009 I.058 J1.744 E.19863 G1 X-33.056 Y44.955 E.0054 G1 X-32.952 Y44.533 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.789 Y42.054 I.494 J-1.212 E.1005 G3 X-32.488 Y42.012 I.311 J1.122 E.00937 G3 X-32.915 Y44.547 I.03 J1.308 E.14159 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.661 Y43.821 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.686 Y42.91 ;WIPE_END G1 X-32.45 Y45.674 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G3 X-33.627 Y41.282 I-.008 J-2.351 E.20475 G3 X-32.336 Y40.974 I1.183 J2.099 E.04461 G3 X-32.41 Y45.673 I-.123 J2.348 E.23939 G1 X-32.45 Y46.104 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.307 Y40.54 I0 J-2.784 E.27311 G3 X-29.712 Y43.825 I-.13 J2.77 E.14576 G3 X-32.41 Y46.103 I-2.738 J-.505 E.11754 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.353 Y45.047 E.00574 G1 X-31.202 Y44.946 E.00294 G1 X-31.001 Y44.769 E.00434 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.453 Y43.766 E.00574 G1 X-30.418 Y43.588 E.00294 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.469 Y42.796 E.00424 G1 X-30.556 Y42.536 E.00445 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.447 Y42.874 E.00574 G1 X-34.482 Y43.052 E.00294 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.177 Y44.417 E.00574 G1 X-34.076 Y44.568 E.00294 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00434 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.353 Y45.047 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.498 ;WIPE_END G1 X-23.145 Y44.389 Z6 F30000 G1 X-20.805 Y44.355 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-20.805 Y-23.355 E2.24606 G1 X-20.095 Y-23.355 E.02355 G1 X-20.095 Y44.355 E2.24606 G1 X-20.765 Y44.355 E.02223 G1 X-21.24 Y44.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.24 Y-23.79 E2.10727 G1 X-19.66 Y-23.79 E.04855 G1 X-19.66 Y44.79 E2.10727 G1 X-21.2 Y44.79 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-20.45 Y44.151 F30000 ;TYPE:Gap infill ;WIDTH:0.345844 G1 F12000 G1 X-20.45 Y-23.151 E1.66134 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-20.45 Y-21.151 ;WIPE_END G1 X-25.495 Y-15.424 Z6 F30000 G1 X-82.805 Y49.645 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X-22.095 Y49.645 E2.01386 G1 X-22.095 Y50.355 E.02355 G1 X-82.805 Y50.355 E2.01386 G1 X-82.805 Y49.685 E.02223 G1 X-83.24 Y49.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-21.66 Y49.21 E1.89218 G1 X-21.66 Y50.79 E.04855 G1 X-83.24 Y50.79 E1.89218 G1 X-83.24 Y49.25 E.04732 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-82.601 Y50 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X-22.299 Y50 E1.48854 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-24.299 Y50 ;WIPE_END G1 X-21.841 Y42.774 Z6 F30000 G1 X7.002 Y-42.052 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X11.971 Y-38.225 Z6 F30000 G1 X74.198 Y15.448 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z6 F30000 G1 Z5.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.754 Y13.804 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.425876 G1 F12000 G1 X76.572 Y12.986 E.03607 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y12.445 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X75.213 Y13.804 E.05997 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.671 Y13.804 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.572 Y11.903 E.08387 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y11.362 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X74.145 Y13.788 E.1071 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y13.263 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.572 Y10.82 E.10782 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y10.278 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X74.128 Y12.722 E.10782 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y12.18 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.572 Y9.737 E.10782 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.555 Y9.212 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X74.128 Y11.638 E.1071 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y11.097 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X76.029 Y9.196 E.08387 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.487 Y9.196 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X74.128 Y10.555 E.05997 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y10.014 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X74.946 Y9.196 E.03606 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y8.989 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X76.206 Y7.944 E.03211 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.989 E.03211 G1 X76.166 Y8.989 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.85 Y8.634 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.376816 G1 F15000 G1 X75.85 Y8.3 E.00908 G1 X74.85 Y8.3 E.02723 G1 X74.85 Y8.634 E.00908 G1 X75.81 Y8.634 E.02614 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y8.634 G1 X74.85 Y8.3 G1 X75.555 Y8.3 ;WIPE_END G1 X76.206 Y14.011 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X74.494 Y14.011 E.0526 G1 X74.494 Y15.056 E.03211 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.051 E.03088 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.85 Y14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.376815 G1 F15000 G1 X74.85 Y14.366 E.02723 G1 X74.85 Y14.7 E.00908 G1 X75.85 Y14.7 E.02723 G1 X75.85 Y14.406 E.008 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X75.85 Y14.7 G1 X74.85 Y14.7 G1 X74.85 Y14.366 G1 X75.221 Y14.366 ;WIPE_END G1 X70.681 Y20.502 Z6 F30000 G1 X57.405 Y38.445 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X57.405 Y38.755 E.01028 G1 X52.695 Y38.755 E.15624 G1 X52.695 Y38.445 E.01028 G1 X57.365 Y38.445 E.15491 G1 X57.84 Y38.01 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X57.84 Y39.19 E.03626 G1 X52.26 Y39.19 E.17146 G1 X52.26 Y38.01 E.03626 G1 X57.8 Y38.01 E.17023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X57.84 Y39.19 G1 X57.021 Y39.19 ;WIPE_END G1 X49.388 Y39.178 Z6 F30000 G1 X33.602 Y39.152 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z6 F30000 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z6 F30000 G1 X35.602 Y-10.448 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z6 F30000 G1 X3.498 Y40.648 Z6 G1 Z5.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:5.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;5.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;5.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.2 I-.071 J-1.215 P1 F30000 G1 X-73.143 Y44.921 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X-73.322 Y44.83 E.00666 G3 X-72.902 Y41.633 I.871 J-1.511 E.13638 G1 X-72.678 Y41.589 E.00758 G3 X-73.105 Y44.935 I.228 J1.73 E.21165 G1 X-72.951 Y44.53 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.621 Y42.021 I.504 J-1.21 E.10526 G3 X-72.45 Y44.63 I.168 J1.299 E.13159 G3 X-72.914 Y44.544 I.003 J-1.311 E.01458 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.105 Y44.455 G1 X-73.377 Y44.247 G1 X-73.585 Y43.975 G1 X-73.661 Y43.821 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.716 Y42.981 G1 X-73.686 Y42.909 ;WIPE_END G1 X-72.771 Y45.642 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X-72.855 Y45.636 E.00279 G3 X-73.627 Y41.282 I.397 J-2.316 E.19109 G3 X-72.351 Y40.973 I1.185 J2.104 E.04409 G3 X-72.45 Y45.67 I-.107 J2.347 E.24107 G1 X-72.731 Y45.646 E.00936 G1 X-72.813 Y46.08 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.939 Y46.061 I.363 J-2.76 E.00391 G3 X-72.323 Y40.539 I.49 J-2.741 E.25753 G3 X-72.774 Y46.085 I-.128 J2.781 E.27478 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.718 Y45.352 F30000 ;TYPE:Gap infill ;WIDTH:0.241773 G1 F12000 G1 X-72.45 Y45.37 E.00434 G1 X-72.182 Y45.352 E.00434 G1 X-71.919 Y45.3 E.00434 G1 X-71.665 Y45.214 E.00435 G2 X-74.5 Y43.313 I-.786 J-1.892 E.14319 G1 X-74.482 Y43.588 E.00445 G1 X-74.43 Y43.851 E.00434 G1 X-74.344 Y44.104 E.00434 G1 X-74.228 Y44.339 E.00424 G1 X-74.072 Y44.573 E.00455 G1 X-73.899 Y44.769 E.00424 G1 X-73.693 Y44.95 E.00445 G1 X-73.475 Y45.095 E.00424 G1 X-73.234 Y45.214 E.00435 G1 X-72.981 Y45.3 E.00434 G1 X-72.757 Y45.345 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.182 Y45.352 G1 X-71.919 Y45.3 G1 X-71.665 Y45.214 G1 X-71.426 Y45.094 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.945 Y44.707 ;WIPE_END G1 X-63.313 Y44.749 Z6.2 F30000 G1 X-33.152 Y44.917 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X-33.322 Y44.83 E.00633 G3 X-32.902 Y41.633 I.871 J-1.511 E.13638 G1 X-32.678 Y41.589 E.00758 G3 X-33.115 Y44.931 I.228 J1.73 E.21198 G1 X-32.962 Y44.514 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.104 Y44.453 E.00476 G3 X-32.789 Y42.054 I.654 J-1.134 E.0948 G1 X-32.621 Y42.021 E.00527 G3 X-32.788 Y44.583 I.171 J1.298 E.14214 G1 X-32.925 Y44.529 E.0045 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.104 Y44.453 G1 X-33.248 Y44.36 G1 X-33.377 Y44.247 G1 X-33.573 Y43.993 G1 X-33.66 Y43.823 G1 X-33.745 Y43.512 G1 X-33.761 Y43.322 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.68 Y42.895 ;WIPE_END G1 X-32.45 Y45.673 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G3 X-33.627 Y41.282 I-.008 J-2.351 E.20468 G3 X-32.351 Y40.973 I1.185 J2.104 E.04409 G3 X-32.41 Y45.672 I-.107 J2.349 E.2399 G1 X-32.45 Y46.109 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-34.148 Y41.107 I-.008 J-2.787 E.21341 G3 X-32.323 Y40.539 I1.683 J2.19 E.05998 G3 X-32.41 Y46.108 I-.135 J2.783 E.26338 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241727 G1 F12000 G2 X-34.5 Y43.32 I0 J-2.05 E.15649 G1 X-34.5 Y43.32 E0 G2 X-32.49 Y45.37 I2.05 J0 E.05152 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.426 Y45.094 G1 X-31.207 Y44.95 G1 X-31.001 Y44.769 G1 X-30.82 Y44.563 G1 X-30.777 Y44.499 ;WIPE_END G1 X-32.271 Y37.014 Z6.2 F30000 G1 X-40.85 Y-5.985 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X-40.94 Y-5.808 E.00659 G3 X-42.902 Y-8.367 I-1.51 J-.873 E.2272 G1 X-42.678 Y-8.411 E.00758 G3 X-40.835 Y-6.022 I.228 J1.73 E.1209 G1 X-41.241 Y-6.179 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.209 J-.502 E.16318 G1 X-42.621 Y-7.979 E.00527 G3 X-41.227 Y-6.217 I.171 J1.298 E.08305 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.523 Y-5.753 G1 X-41.777 Y-5.557 G1 X-41.947 Y-5.47 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.863 Y-5.439 ;WIPE_END G1 X-44.116 Y-8.346 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G3 X-43.627 Y-8.718 I1.658 J1.667 E.02045 G3 X-42.351 Y-9.027 I1.185 J2.104 E.04409 G3 X-44.144 Y-8.317 I-.107 J2.349 E.42413 G1 X-44.423 Y-8.653 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-44.148 Y-8.893 I1.966 J1.975 E.01122 G3 X-42.323 Y-9.461 I1.683 J2.19 E.05998 G3 X-44.451 Y-8.625 I-.135 J2.783 E.46557 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241761 G1 F12000 G2 X-44.5 Y-6.68 I1.449 J1.45 E.02609 G1 X-44.482 Y-6.412 E.00434 G1 X-44.43 Y-6.149 E.00434 G1 X-44.344 Y-5.896 E.00435 G1 X-44.225 Y-5.655 E.00434 G1 X-44.076 Y-5.432 E.00434 G1 X-43.899 Y-5.231 E.00434 G1 X-43.698 Y-5.054 E.00434 G1 X-43.48 Y-4.908 E.00424 G1 X-43.228 Y-4.784 E.00455 G1 X-42.981 Y-4.7 E.00424 G1 X-42.711 Y-4.647 E.00445 G1 X-42.45 Y-4.63 E.00424 G1 X-42.182 Y-4.648 E.00434 G1 X-41.919 Y-4.7 E.00434 G1 X-41.665 Y-4.786 E.00435 G2 X-43.871 Y-8.157 I-.785 J-1.894 E.11674 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.225 Y-7.705 G1 X-44.344 Y-7.464 G1 X-44.43 Y-7.211 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.68 G1 X-44.482 Y-6.412 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z6.2 F30000 G1 X-64.175 Y-6.421 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X-64.18 Y-6.452 E.00104 G3 X-62.902 Y-8.367 I1.729 J-.23 E.08338 G1 X-62.678 Y-8.411 E.00758 G3 X-64.135 Y-6.229 I.228 J1.73 E.26506 G1 X-64.167 Y-6.382 E.00521 G1 X-63.748 Y-6.509 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.789 Y-7.946 I1.298 J-.172 E.05796 G1 X-62.621 Y-7.979 E.00527 G3 X-63.742 Y-6.47 I.171 J1.298 E.18828 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-62.953 Y-7.89 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.961 ;WIPE_END G1 X-62.143 Y-4.35 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G3 X-63.627 Y-8.718 I-.315 J-2.329 E.21482 G3 X-62.351 Y-9.027 I1.185 J2.104 E.04409 G3 X-62.104 Y-4.356 I-.107 J2.348 E.2296 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.371 J-2.762 E.22462 G3 X-62.323 Y-9.461 I1.683 J2.19 E.05998 G3 X-62.047 Y-3.922 I-.135 J2.783 E.25217 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.182 Y-4.648 F30000 ;TYPE:Gap infill ;WIDTH:0.241762 G1 F12000 G1 X-61.919 Y-4.7 E.00434 G1 X-61.665 Y-4.786 E.00435 G2 X-64.5 Y-6.68 I-.786 J-1.892 E.14329 G1 X-64.482 Y-6.412 E.00434 G1 X-64.43 Y-6.149 E.00434 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.076 Y-5.432 E.00434 G1 X-63.9 Y-5.231 E.00434 G1 X-63.698 Y-5.054 E.00434 G1 X-63.48 Y-4.908 E.00424 G1 X-63.228 Y-4.784 E.00455 G1 X-62.981 Y-4.7 E.00424 G1 X-62.711 Y-4.647 E.00445 G1 X-62.45 Y-4.63 E.00424 G1 X-62.222 Y-4.645 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.665 Y-4.786 G1 X-61.426 Y-4.906 G1 X-61.202 Y-5.054 G1 X-61 Y-5.231 G1 X-60.824 Y-5.432 G1 X-60.675 Y-5.655 G1 X-60.638 Y-5.73 ;WIPE_END G1 X-53.914 Y-9.341 Z6.2 F30000 G1 X7.002 Y-42.052 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X7.002 Y-44.445 E.07938 G1 X7.298 Y-44.445 E.00981 G1 X7.298 Y-42.052 E.07938 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17826 G1 X6.595 Y-44.852 E.10639 G1 X7.705 Y-44.852 E.03682 G1 X7.705 Y-41.645 E.10639 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-45.287 E.12528 G1 X8.14 Y-45.287 E.06084 G1 X8.14 Y-41.21 E.12528 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.18 Y-43.21 ;WIPE_END G1 X7.002 Y-47.555 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X7.002 Y-49.948 E.07938 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-47.555 E.07938 G1 X7.042 Y-47.555 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.148 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17826 G1 X6.595 Y-50.355 E.10639 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.148 E.10639 G1 X6.635 Y-47.148 E.03549 G1 X6.16 Y-46.713 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.12528 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-46.713 E.12528 G1 X6.2 Y-46.713 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.18 Y-48.713 ;WIPE_END G1 X11.732 Y-43.475 Z6.2 F30000 G1 X74.198 Y15.448 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.055 E.07938 G1 X76.598 Y13.055 E.08279 G1 X76.598 Y15.448 E.07938 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17826 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y12.648 E.17273 G1 X77.005 Y12.648 E.1098 G1 X77.005 Y15.855 E.10639 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y12.213 E.18674 G1 X77.44 Y12.213 E.12844 G1 X77.44 Y16.29 E.12528 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y13.447 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X74.494 Y13.447 E.0526 G1 X74.494 Y15.056 E.04944 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y13.487 E.04821 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y13.824 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X74.871 Y13.824 E.02942 G1 X74.871 Y14.679 E.02627 G1 X75.829 Y14.679 E.02942 G1 X75.829 Y13.864 E.02504 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X75.829 Y14.679 G1 X74.871 Y14.679 G1 X74.871 Y14.451 ;WIPE_END G1 X76.598 Y9.945 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X74.102 Y9.945 E.08279 G1 X74.102 Y7.552 E.07938 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.905 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y10.352 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17826 G1 X73.695 Y10.352 E.1098 G1 X73.695 Y7.145 E.10639 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y10.312 E.10506 G1 X77.44 Y10.787 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y10.787 E.12844 G1 X73.26 Y6.71 E.12528 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y10.747 E.12405 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y10.766 ;WIPE_END G1 X76.206 Y9.553 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X76.206 Y7.944 E.04944 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y9.553 E.04944 G1 X76.166 Y9.553 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y9.176 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X75.829 Y8.321 E.02627 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y9.176 E.02627 G1 X75.789 Y9.176 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.871 Y9.176 G1 X74.871 Y8.321 G1 X75.099 Y8.321 ;WIPE_END G1 X71.163 Y14.861 Z6.2 F30000 G1 X56.76 Y38.79 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z6.2 F30000 G1 X33.602 Y39.152 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17826 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z6.2 F30000 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z6.2 F30000 G1 X35.602 Y-10.448 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17826 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z6.2 F30000 G1 X3.498 Y40.648 Z6.2 G1 Z5.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17826 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17826 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.4 I-.071 J-1.215 P1 F30000 G1 X-73.145 Y44.92 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X-73.322 Y44.83 E.0066 G3 X-72.902 Y41.633 I.871 J-1.511 E.13638 G1 X-72.678 Y41.589 E.00758 G3 X-73.107 Y44.934 I.228 J1.73 E.21171 G1 X-72.952 Y44.53 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.104 Y44.453 E.00524 G3 X-72.789 Y42.054 I.654 J-1.134 E.0948 G1 X-72.621 Y42.021 E.00527 G3 X-72.916 Y44.542 I.171 J1.298 E.14626 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.104 Y44.453 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.66 Y43.823 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.716 Y42.981 G1 X-73.685 Y42.907 ;WIPE_END G1 X-72.757 Y45.653 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G3 X-73.351 Y41.146 I.298 J-2.332 E.20479 G3 X-72.367 Y40.972 I.881 J2.116 E.03341 G3 X-72.718 Y45.658 I-.092 J2.349 E.25054 G1 X-72.814 Y46.083 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-74.148 Y41.107 I.356 J-2.763 E.20209 G3 X-72.338 Y40.538 I1.683 J2.191 E.0595 G3 X-72.774 Y46.088 I-.119 J2.783 E.27497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.711 Y45.353 F30000 ;TYPE:Gap infill ;WIDTH:0.241761 G1 F12000 G2 X-74.5 Y43.313 I.259 J-2.031 E.16044 G1 X-74.481 Y43.594 E.00455 G1 X-74.43 Y43.851 E.00424 G1 X-74.344 Y44.104 E.00434 G2 X-72.751 Y45.347 I1.892 J-.783 E.03424 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.189 Y45.353 G1 X-71.919 Y45.3 G1 X-71.654 Y45.209 G1 X-71.426 Y45.094 G1 X-71.202 Y44.946 G1 X-70.996 Y44.765 G1 X-70.941 Y44.702 ;WIPE_END G1 X-63.309 Y44.75 Z6.4 F30000 G1 X-33.098 Y44.94 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X-33.118 Y44.932 E.00071 G3 X-32.678 Y41.589 I.672 J-1.612 E.15143 G3 X-32.45 Y45.066 I.224 J1.732 E.18932 G3 X-32.902 Y45.006 I.004 J-1.747 E.01516 G1 X-33.06 Y44.953 E.00554 G1 X-32.951 Y44.53 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.621 Y42.021 I.504 J-1.21 E.10526 G3 X-32.45 Y44.63 I.168 J1.299 E.13159 G3 X-32.914 Y44.544 I.003 J-1.311 E.01458 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.248 Y44.36 G1 X-33.377 Y44.247 G1 X-33.576 Y43.988 G1 X-33.66 Y43.823 G1 X-33.749 Y43.491 G1 X-33.76 Y43.32 G1 X-33.719 Y42.996 G1 X-33.69 Y42.907 ;WIPE_END G1 X-32.45 Y45.672 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G3 X-33.351 Y41.146 I-.009 J-2.351 E.21501 G3 X-32.367 Y40.972 I.881 J2.116 E.03341 G3 X-32.41 Y45.672 I-.092 J2.349 E.24033 G1 X-32.45 Y46.109 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-34.148 Y41.107 I-.007 J-2.787 E.2134 G3 X-32.338 Y40.538 I1.683 J2.191 E.0595 G3 X-32.41 Y46.108 I-.119 J2.784 E.26391 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.369 F30000 ;TYPE:Gap infill ;WIDTH:0.24173 G1 F12000 G2 X-34.5 Y43.313 I-.002 J-2.048 E.15617 G1 X-34.481 Y43.594 E.00455 G1 X-34.43 Y43.851 E.00424 G1 X-34.344 Y44.104 E.00434 G2 X-32.49 Y45.369 I1.892 J-.783 E.03848 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.189 Y45.353 G1 X-31.919 Y45.3 G1 X-31.654 Y45.209 G1 X-31.426 Y45.094 G1 X-31.202 Y44.946 G1 X-30.996 Y44.765 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-32.271 Y37.014 Z6.4 F30000 G1 X-40.85 Y-5.984 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X-40.94 Y-5.808 E.00653 G3 X-42.902 Y-8.367 I-1.51 J-.873 E.2272 G1 X-42.678 Y-8.411 E.00758 G3 X-40.836 Y-6.021 I.228 J1.73 E.12096 G1 X-41.241 Y-6.179 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.209 J-.502 E.16318 G1 X-42.621 Y-7.979 E.00527 G3 X-41.227 Y-6.217 I.171 J1.298 E.08305 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.523 Y-5.753 G1 X-41.782 Y-5.554 G1 X-41.947 Y-5.47 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.863 Y-5.439 ;WIPE_END G1 X-44.117 Y-8.347 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G3 X-43.351 Y-8.854 I1.657 J1.668 E.03068 G3 X-42.367 Y-9.028 I.881 J2.116 E.03341 G3 X-44.145 Y-8.318 I-.092 J2.349 E.42465 G1 X-44.419 Y-8.649 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-44.055 Y-8.955 I1.97 J1.972 E.01463 G3 X-42.338 Y-9.462 I1.576 J2.176 E.05608 G3 X-44.447 Y-8.621 I-.111 J2.785 E.46621 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.898 Y-8.128 F30000 ;TYPE:Gap infill ;WIDTH:0.24176 G1 F12000 G2 X-44.5 Y-6.68 I1.446 J1.45 E.02607 G1 X-44.482 Y-6.412 E.00434 G1 X-44.43 Y-6.149 E.00434 G1 X-44.344 Y-5.896 E.00434 G1 X-44.228 Y-5.661 E.00424 G1 X-44.072 Y-5.427 E.00455 G1 X-43.899 Y-5.231 E.00424 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00434 G1 X-42.718 Y-4.648 E.00434 G1 X-42.45 Y-4.63 E.00434 G1 X-42.182 Y-4.648 E.00434 G1 X-41.919 Y-4.7 E.00434 G1 X-41.665 Y-4.786 E.00434 G2 X-43.869 Y-8.156 I-.786 J-1.892 E.11657 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.225 Y-7.705 G1 X-44.344 Y-7.464 G1 X-44.43 Y-7.211 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.68 G1 X-44.482 Y-6.412 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.098 Y-6.366 Z6.4 F30000 G1 X-64.175 Y-6.421 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X-64.18 Y-6.452 E.00104 G3 X-62.902 Y-8.367 I1.729 J-.23 E.08338 G1 X-62.678 Y-8.411 E.00758 G3 X-64.135 Y-6.229 I.228 J1.73 E.26506 G1 X-64.167 Y-6.382 E.0052 G1 X-63.748 Y-6.509 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.789 Y-7.946 I1.298 J-.172 E.05796 G1 X-62.621 Y-7.979 E.00527 G3 X-63.742 Y-6.47 I.171 J1.298 E.18828 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.961 ;WIPE_END G1 X-62.143 Y-4.349 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G3 X-63.351 Y-8.854 I-.316 J-2.33 E.22522 G3 X-62.367 Y-9.028 I.881 J2.116 E.03341 G3 X-62.104 Y-4.355 I-.092 J2.349 E.23011 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-64.148 Y-8.893 I-.371 J-2.762 E.22461 G3 X-62.338 Y-9.462 I1.683 J2.191 E.0595 G3 X-62.047 Y-3.922 I-.119 J2.784 E.25269 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.182 Y-4.648 F30000 ;TYPE:Gap infill ;WIDTH:0.24176 G1 F12000 G1 X-61.919 Y-4.7 E.00434 G1 X-61.665 Y-4.786 E.00434 G2 X-64.5 Y-6.68 I-.786 J-1.892 E.14329 G1 X-64.482 Y-6.412 E.00434 G1 X-64.43 Y-6.149 E.00434 G1 X-64.344 Y-5.896 E.00434 G1 X-64.228 Y-5.661 E.00424 G1 X-64.072 Y-5.427 E.00455 G1 X-63.9 Y-5.231 E.00424 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00434 G1 X-62.718 Y-4.648 E.00434 G1 X-62.45 Y-4.63 E.00434 G1 X-62.222 Y-4.645 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.665 Y-4.786 G1 X-61.426 Y-4.906 G1 X-61.202 Y-5.054 G1 X-61.001 Y-5.231 G1 X-60.824 Y-5.432 G1 X-60.675 Y-5.655 G1 X-60.638 Y-5.73 ;WIPE_END G1 X-53.914 Y-9.341 Z6.4 F30000 G1 X7.002 Y-42.052 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X7.002 Y-44.123 E.06869 G1 X7.298 Y-44.123 E.00981 G1 X7.298 Y-42.052 E.06869 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17372 G1 X6.595 Y-44.53 E.09569 G1 X7.705 Y-44.53 E.03682 G1 X7.705 Y-41.645 E.09569 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.965 E.11537 G1 X8.14 Y-44.965 E.06084 G1 X8.14 Y-41.21 E.11537 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.179 Y-43.21 ;WIPE_END G1 X7.002 Y-47.877 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X7.002 Y-49.948 E.06869 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-47.877 E.06869 G1 X7.042 Y-47.877 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.47 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17372 G1 X6.595 Y-50.355 E.09569 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.47 E.09569 G1 X6.635 Y-47.47 E.03549 G1 X6.16 Y-47.035 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.11537 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.035 E.11537 G1 X6.2 Y-47.035 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.179 Y-49.035 ;WIPE_END G1 X11.718 Y-43.784 Z6.4 F30000 G1 X74.198 Y15.448 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.377 E.06869 G1 X76.598 Y13.377 E.08279 G1 X76.598 Y15.448 E.06869 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17372 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y12.97 E.16204 G1 X77.005 Y12.97 E.1098 G1 X77.005 Y15.855 E.09569 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y12.535 E.17683 G1 X77.44 Y12.535 E.12844 G1 X77.44 Y16.29 E.11537 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z6.4 F30000 G1 Z6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y13.769 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X74.494 Y13.769 E.0526 G1 X74.494 Y15.056 E.03953 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y13.809 E.0383 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.79 Y14.185 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4976 G1 F15000 G1 X74.91 Y14.185 E.0326 G1 X74.91 Y14.64 E.01685 G1 X75.79 Y14.64 E.0326 G1 X75.79 Y14.225 E.01536 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X75.79 Y14.64 G1 X74.91 Y14.64 G1 X74.91 Y14.185 G1 X75.161 Y14.185 ;WIPE_END G1 X76.598 Y9.623 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X74.102 Y9.623 E.08279 G1 X74.102 Y7.552 E.06869 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.583 E.06736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y10.03 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17372 G1 X73.695 Y10.03 E.1098 G1 X73.695 Y7.145 E.09569 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.99 E.09437 G1 X77.44 Y10.465 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y10.465 E.12844 G1 X73.26 Y6.71 E.11537 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y10.425 E.11414 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y10.444 ;WIPE_END G1 X76.206 Y9.231 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X76.206 Y7.944 E.03953 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y9.231 E.03953 G1 X76.166 Y9.231 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.79 Y8.815 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4976 G1 F15000 G1 X75.79 Y8.36 E.01685 G1 X74.91 Y8.36 E.0326 G1 X74.91 Y8.815 E.01685 G1 X75.75 Y8.815 E.03112 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.91 Y8.815 G1 X74.91 Y8.36 G1 X75.615 Y8.36 ;WIPE_END G1 X71.595 Y14.848 Z6.4 F30000 G1 X56.76 Y38.79 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z6.4 F30000 G1 X33.602 Y39.152 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17372 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z6.4 F30000 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z6.4 F30000 G1 X35.602 Y-10.448 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17372 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z6.4 F30000 G1 X3.498 Y40.648 Z6.4 G1 Z6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17372 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17372 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:6.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.2 G1 E-.8 F1800 M73 P37 R69 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.6 I-.071 J-1.215 P1 F30000 G1 X-73.146 Y44.92 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X-73.322 Y44.83 E.00654 G3 X-72.902 Y41.633 I.871 J-1.511 E.13638 G1 X-72.678 Y41.589 E.00758 G3 X-73.109 Y44.934 I.228 J1.73 E.21177 G1 X-72.954 Y44.53 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.104 Y44.453 E.00518 G3 X-72.789 Y42.054 I.654 J-1.134 E.0948 G1 X-72.621 Y42.021 E.00527 G3 X-72.917 Y44.542 I.171 J1.298 E.14629 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.104 Y44.453 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.66 Y43.822 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.684 Y42.905 ;WIPE_END G1 X-72.757 Y45.653 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G3 X-73.351 Y41.146 I.299 J-2.332 E.20474 G3 X-72.383 Y40.971 I.883 J2.122 E.03289 G3 X-72.718 Y45.658 I-.076 J2.35 E.25116 G1 X-72.814 Y46.086 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.845 Y40.904 I.356 J-2.764 E.21347 G3 X-72.354 Y40.537 I1.408 J2.505 E.04776 G3 X-72.774 Y46.091 I-.104 J2.785 E.27556 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.35 F30000 ;TYPE:Gap infill ;WIDTH:0.241763 G1 F12000 G2 X-74.5 Y43.313 I.272 J-2.029 E.16065 G1 X-74.482 Y43.588 E.00445 G1 X-74.431 Y43.844 E.00424 G1 X-74.339 Y44.114 E.00462 G2 X-72.763 Y45.344 I1.887 J-.794 E.03384 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.672 Y45.216 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71.005 Y44.774 G1 X-70.95 Y44.711 ;WIPE_END G1 X-63.318 Y44.758 Z6.6 F30000 G1 X-33.089 Y44.943 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X-33.117 Y44.93 E.00103 G3 X-32.902 Y41.633 I.667 J-1.612 E.14395 G1 X-32.678 Y41.589 E.00758 G3 X-32.901 Y45.003 I.228 J1.73 E.2045 G1 X-33.051 Y44.956 E.00521 G1 X-32.937 Y44.524 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.104 Y44.453 E.00557 G3 X-32.789 Y42.054 I.654 J-1.134 E.0948 G1 X-32.621 Y42.021 E.00527 G3 X-32.788 Y44.583 I.171 J1.298 E.14214 G1 X-32.9 Y44.539 E.00369 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.104 Y44.453 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.661 Y43.821 G1 X-33.747 Y43.501 G1 X-33.761 Y43.321 G1 X-33.749 Y43.149 G1 X-33.688 Y42.919 ;WIPE_END G1 X-32.45 Y45.673 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G3 X-33.351 Y41.146 I-.008 J-2.351 E.21496 G3 X-32.383 Y40.971 I.883 J2.122 E.03289 G3 X-32.41 Y45.672 I-.076 J2.35 E.24095 G1 X-32.45 Y46.108 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.845 Y40.904 I-.008 J-2.787 E.22468 G3 X-32.354 Y40.537 I1.408 J2.505 E.04776 G3 X-32.41 Y46.108 I-.104 J2.785 E.26434 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.369 F30000 ;TYPE:Gap infill ;WIDTH:0.24174 G1 F12000 G2 X-34.483 Y43.059 I0 J-2.05 E.15224 G1 X-34.5 Y43.32 E.00424 G1 X-34.5 Y43.331 E.00018 G2 X-32.49 Y45.369 I2.05 J-.011 E.05133 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31 Y44.77 G1 X-30.824 Y44.567 G1 X-30.778 Y44.498 ;WIPE_END G1 X-32.271 Y37.013 Z6.6 F30000 G1 X-40.851 Y-5.982 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X-40.94 Y-5.808 E.00647 G3 X-42.902 Y-8.367 I-1.51 J-.873 E.2272 G1 X-42.678 Y-8.411 E.00758 G3 X-40.837 Y-6.019 I.228 J1.73 E.12102 G1 X-41.241 Y-6.179 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.209 J-.502 E.16318 G1 X-42.621 Y-7.979 E.00527 G3 X-41.227 Y-6.217 I.171 J1.298 E.08305 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.404 Y-5.891 G1 X-41.523 Y-5.754 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.863 Y-5.439 ;WIPE_END G1 X-44.116 Y-8.346 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G3 X-43.351 Y-8.854 I1.658 J1.667 E.03068 G3 X-42.383 Y-9.029 I.883 J2.122 E.03289 G3 X-44.144 Y-8.318 I-.076 J2.35 E.42523 G1 X-44.424 Y-8.654 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-43.845 Y-9.096 I1.966 J1.976 E.02245 G3 X-42.354 Y-9.463 I1.408 J2.505 E.04776 G3 X-44.452 Y-8.626 I-.104 J2.785 E.46657 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.904 Y-8.125 F30000 ;TYPE:Gap infill ;WIDTH:0.241747 G1 F12000 G2 X-44.483 Y-6.941 I1.454 J1.445 E.02173 G1 X-44.5 Y-6.68 E.00424 G1 X-44.5 Y-6.669 E.00018 G2 X-43.876 Y-8.153 I2.05 J-.011 E.18185 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.225 Y-7.705 G1 X-44.344 Y-7.464 G1 X-44.428 Y-7.217 G1 X-44.483 Y-6.941 G1 X-44.5 Y-6.68 G1 X-44.5 Y-6.669 G1 X-44.482 Y-6.413 G1 X-44.464 Y-6.324 ;WIPE_END G1 X-52.097 Y-6.361 Z6.6 F30000 G1 X-64.175 Y-6.42 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X-64.178 Y-6.44 E.00067 G3 X-62.902 Y-8.367 I1.728 J-.242 E.0838 G1 X-62.678 Y-8.411 E.00758 G3 X-64.135 Y-6.229 I.228 J1.73 E.26506 G1 X-64.167 Y-6.381 E.00516 G1 X-63.747 Y-6.499 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.789 Y-7.946 I1.296 J-.183 E.05828 G1 X-62.621 Y-7.979 E.00527 G3 X-63.74 Y-6.459 I.171 J1.298 E.18795 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.761 Y-6.679 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-62.952 Y-7.89 G1 X-62.789 Y-7.946 G1 X-62.724 Y-7.959 ;WIPE_END G1 X-62.143 Y-4.351 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G3 X-63.351 Y-8.854 I-.315 J-2.329 E.22505 G3 X-62.383 Y-9.029 I.883 J2.122 E.03289 G3 X-62.104 Y-4.357 I-.076 J2.349 E.23061 G1 X-62.086 Y-3.916 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.845 Y-9.096 I-.372 J-2.762 E.2359 G3 X-62.354 Y-9.463 I1.408 J2.505 E.04776 G3 X-62.047 Y-3.922 I-.104 J2.785 E.25312 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241747 G1 F12000 G2 X-64.483 Y-6.941 I-.274 J-2.031 E.1478 G1 X-64.5 Y-6.68 E.00424 G1 X-64.5 Y-6.669 E.00018 G2 X-62.216 Y-4.644 I2.05 J-.011 E.05579 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.42 Y-4.908 G1 X-61.202 Y-5.054 G1 X-61 Y-5.23 G1 X-60.824 Y-5.433 G1 X-60.678 Y-5.65 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-53.911 Y-9.346 Z6.6 F30000 G1 X7.002 Y-42.052 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X7.002 Y-43.898 E.06123 G1 X7.298 Y-43.898 E.00981 G1 X7.298 Y-42.052 E.06123 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17119 G1 X6.595 Y-44.305 E.08824 G1 X7.705 Y-44.305 E.03682 M73 P37 R68 G1 X7.705 Y-41.645 E.08824 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.74 E.10847 G1 X8.14 Y-44.74 E.06084 G1 X8.14 Y-41.21 E.10847 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.177 Y-43.21 ;WIPE_END G1 X7.002 Y-48.102 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X7.002 Y-49.948 E.06123 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.102 E.06123 G1 X7.042 Y-48.102 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.695 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17119 G1 X6.595 Y-50.355 E.08824 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.695 E.08824 G1 X6.635 Y-47.695 E.03549 G1 X6.16 Y-47.26 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.10847 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.26 E.10847 G1 X6.2 Y-47.26 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.177 Y-49.26 ;WIPE_END G1 X11.707 Y-43.999 Z6.6 F30000 G1 X74.198 Y15.448 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.602 E.06123 G1 X76.598 Y13.602 E.08279 G1 X76.598 Y15.448 E.06123 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17119 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.195 E.15458 G1 X77.005 Y13.195 E.1098 G1 X77.005 Y15.855 E.08824 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y12.76 E.16992 G1 X77.44 Y12.76 E.12844 G1 X77.44 Y16.29 E.10847 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y13.994 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X74.494 Y13.994 E.0526 G1 X74.494 Y15.056 E.03262 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.034 E.03139 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.846 Y14.354 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.385198 G1 F15000 G1 X74.854 Y14.354 E.02768 G1 X74.854 Y14.696 E.00955 G1 X75.846 Y14.696 E.02768 G1 X75.846 Y14.394 E.00843 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X75.846 Y14.696 G1 X74.854 Y14.696 G1 X74.854 Y14.354 G1 X75.217 Y14.354 ;WIPE_END G1 X76.598 Y9.398 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X74.102 Y9.398 E.08279 G1 X74.102 Y7.552 E.06123 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.358 E.0599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.805 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17119 G1 X73.695 Y9.805 E.1098 G1 X73.695 Y7.145 E.08824 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.765 E.08691 G1 X77.44 Y10.24 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y10.24 E.12844 G1 X73.26 Y6.71 E.10847 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y10.2 E.10724 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y10.219 ;WIPE_END G1 X76.206 Y9.006 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X76.206 Y7.944 E.03262 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y9.006 E.03262 G1 X76.166 Y9.006 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.846 Y8.646 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.385198 G1 F15000 G1 X75.846 Y8.304 E.00955 G1 X74.854 Y8.304 E.02768 G1 X74.854 Y8.646 E.00955 G1 X75.806 Y8.646 E.02656 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.854 Y8.646 G1 X74.854 Y8.304 G1 X75.559 Y8.304 ;WIPE_END G1 X71.553 Y14.8 Z6.6 F30000 G1 X56.76 Y38.79 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z6.6 F30000 G1 X33.602 Y39.152 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17119 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z6.6 F30000 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z6.6 F30000 G1 X35.602 Y-10.448 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17119 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z6.6 F30000 G1 X3.498 Y40.648 Z6.6 G1 Z6.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F17119 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F17119 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:6.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z6.8 I-.071 J-1.215 P1 F30000 G1 X-73.148 Y44.919 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X-73.322 Y44.83 E.00648 G3 X-72.902 Y41.633 I.871 J-1.511 E.13638 G1 X-72.678 Y41.589 E.00758 G3 X-73.11 Y44.933 I.228 J1.73 E.21183 G1 X-72.955 Y44.529 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.104 Y44.453 E.00513 G3 X-72.789 Y42.054 I.654 J-1.134 E.0948 G1 X-72.621 Y42.021 E.00527 G3 X-72.918 Y44.541 I.171 J1.298 E.14633 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.104 Y44.453 G1 X-73.248 Y44.36 G1 X-73.49 Y44.118 G1 X-73.661 Y43.822 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.749 Y43.149 G1 X-73.684 Y42.904 ;WIPE_END G1 X-72.757 Y45.653 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G3 X-73.351 Y41.146 I.3 J-2.332 E.20465 G3 X-72.398 Y40.97 I.885 J2.13 E.03237 G3 X-72.717 Y45.657 I-.059 J2.351 E.25176 G1 X-72.814 Y46.082 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.845 Y40.904 I.356 J-2.763 E.21331 G3 X-72.37 Y40.536 I1.412 J2.515 E.04727 G3 X-72.774 Y46.087 I-.088 J2.784 E.27591 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.718 Y45.352 F30000 ;TYPE:Gap infill ;WIDTH:0.241753 G1 F12000 G1 X-72.45 Y45.37 E.00434 G1 X-72.169 Y45.35 E.00456 G1 X-71.919 Y45.3 E.00413 G1 X-71.666 Y45.214 E.00434 G1 X-71.414 Y45.088 E.00456 G1 X-71.202 Y44.946 E.00413 G1 X-71 Y44.77 E.00434 G1 X-70.824 Y44.568 E.00434 G1 X-70.678 Y44.35 E.00424 G1 X-70.556 Y44.104 E.00445 G1 X-70.469 Y43.844 E.00445 G1 X-70.418 Y43.588 E.00424 G1 X-70.4 Y43.32 E.00434 G1 X-70.418 Y43.052 E.00434 G1 X-70.469 Y42.796 E.00424 G1 X-70.556 Y42.536 E.00445 G1 X-70.675 Y42.295 E.00434 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00434 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00434 G1 X-72.178 Y41.288 E.00427 G1 X-72.45 Y41.27 E.00442 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.475 Y41.545 E.00434 G1 X-73.693 Y41.69 E.00424 G1 X-73.899 Y41.871 E.00445 G1 X-74.08 Y42.077 E.00445 G1 X-74.225 Y42.295 E.00424 G1 X-74.344 Y42.536 E.00435 G1 X-74.43 Y42.79 E.00434 G1 X-74.481 Y43.046 E.00424 G1 X-74.5 Y43.32 E.00445 G1 X-74.481 Y43.594 E.00445 G1 X-74.43 Y43.851 E.00424 G1 X-74.344 Y44.104 E.00434 G1 X-74.225 Y44.345 E.00434 G1 X-74.08 Y44.563 E.00424 G1 X-73.9 Y44.769 E.00445 G1 X-73.698 Y44.946 E.00434 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.974 Y45.301 E.00445 G1 X-72.757 Y45.345 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.169 Y45.35 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.414 Y45.088 G1 X-71.202 Y44.946 G1 X-71 Y44.77 G1 X-70.946 Y44.707 ;WIPE_END G1 X-63.313 Y44.75 Z6.8 F30000 G1 X-33.139 Y44.923 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X-33.322 Y44.83 E.00681 G3 X-32.902 Y41.633 I.871 J-1.511 E.13638 G1 X-32.678 Y41.589 E.00758 G3 X-33.101 Y44.937 I.228 J1.73 E.2115 G1 X-32.951 Y44.528 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.789 Y42.054 I.5 J-1.21 E.10006 G1 X-32.621 Y42.021 E.00527 G3 X-32.913 Y44.543 I.171 J1.298 E.14618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.105 Y44.455 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.685 Y42.909 ;WIPE_END G1 X-32.45 Y45.674 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G3 X-33.351 Y41.146 I-.007 J-2.352 E.21495 G3 X-32.398 Y40.97 I.885 J2.13 E.03237 G3 X-32.41 Y45.673 I-.059 J2.352 E.24166 G1 X-32.45 Y46.105 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.37 Y40.536 I0 J-2.785 E.27135 G3 X-31.807 Y46.03 I-.082 J2.785 E.24637 G3 X-32.41 Y46.105 I-.643 J-2.71 E.01871 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241761 G1 F12000 G1 X-32.182 Y45.352 E.00434 G1 X-31.926 Y45.301 E.00424 G1 X-31.666 Y45.214 E.00445 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.82 Y44.563 E.00445 G1 X-30.675 Y44.345 E.00424 G1 X-30.556 Y44.104 E.00434 G1 X-30.47 Y43.85 E.00434 G1 X-30.419 Y43.594 E.00424 G1 X-30.4 Y43.32 E.00445 G1 X-30.419 Y43.046 E.00445 G1 X-30.47 Y42.789 E.00424 G1 X-30.556 Y42.536 E.00434 G1 X-30.675 Y42.295 E.00434 G1 X-30.82 Y42.077 E.00424 G1 X-31.001 Y41.871 E.00445 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00434 G1 X-32.178 Y41.288 E.00427 G1 X-32.45 Y41.27 E.00442 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00434 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00434 G1 X-34.08 Y42.077 E.00445 G1 X-34.225 Y42.295 E.00424 G1 X-34.344 Y42.536 E.00435 G1 X-34.433 Y42.802 E.00456 G1 X-34.482 Y43.052 E.00413 G1 X-34.5 Y43.313 E.00424 G1 X-34.481 Y43.594 E.00455 G1 X-34.43 Y43.851 E.00424 G1 X-34.344 Y44.104 E.00434 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00434 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.974 Y45.301 E.00445 G1 X-32.718 Y45.352 E.00424 G1 X-32.49 Y45.367 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.182 Y45.352 G1 X-31.926 Y45.301 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.82 Y44.563 G1 X-30.777 Y44.499 ;WIPE_END G1 X-32.271 Y37.014 Z6.8 F30000 G1 X-40.852 Y-5.98 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X-40.94 Y-5.808 E.00642 G3 X-42.902 Y-8.367 I-1.51 J-.873 E.2272 G1 X-42.678 Y-8.411 E.00758 G3 X-40.837 Y-6.018 I.228 J1.73 E.12107 G1 X-41.241 Y-6.179 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.209 J-.502 E.16319 G1 X-42.621 Y-7.979 E.00527 G3 X-41.227 Y-6.217 I.171 J1.298 E.08305 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.407 Y-5.887 G1 X-41.523 Y-5.754 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.274 Y-5.382 G1 X-42.621 Y-5.381 G1 X-42.862 Y-5.445 ;WIPE_END G1 X-44.116 Y-8.346 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G3 X-43.351 Y-8.854 I1.659 J1.665 E.03067 G3 X-42.398 Y-9.03 I.885 J2.129 E.03237 G3 X-44.144 Y-8.317 I-.059 J2.35 E.42553 G1 X-44.424 Y-8.654 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-43.845 Y-9.096 I1.966 J1.975 E.02245 G3 X-42.37 Y-9.464 I1.412 J2.515 E.04727 G3 X-44.452 Y-8.625 I-.088 J2.785 E.46702 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241757 G1 F12000 G1 X-44.076 Y-7.928 E.00434 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.68 E.00434 G1 X-44.482 Y-6.412 E.00434 G1 X-44.431 Y-6.156 E.00424 G1 X-44.344 Y-5.896 E.00445 G1 X-44.222 Y-5.65 E.00445 G1 X-44.076 Y-5.432 E.00424 G1 X-43.9 Y-5.23 E.00434 G1 X-43.698 Y-5.054 E.00434 G1 X-43.48 Y-4.908 E.00424 G1 X-43.234 Y-4.786 E.00445 G1 X-42.974 Y-4.699 E.00445 G1 X-42.718 Y-4.648 E.00424 G1 X-42.45 Y-4.63 E.00434 G1 X-42.182 Y-4.648 E.00434 G1 X-41.926 Y-4.699 E.00424 G1 X-41.666 Y-4.786 E.00445 G1 X-41.42 Y-4.908 E.00445 G1 X-41.202 Y-5.054 E.00424 G1 X-41 Y-5.23 E.00434 G1 X-40.824 Y-5.432 E.00434 G1 X-40.678 Y-5.65 E.00424 G1 X-40.556 Y-5.896 E.00445 G1 X-40.469 Y-6.156 E.00445 G1 X-40.418 Y-6.412 E.00424 G1 X-40.4 Y-6.68 E.00434 G1 X-40.418 Y-6.948 E.00434 G1 X-40.469 Y-7.204 E.00424 G1 X-40.556 Y-7.464 E.00445 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.919 Y-8.66 E.00434 G1 X-42.178 Y-8.712 E.00427 G1 X-42.45 Y-8.73 E.00442 G1 X-42.724 Y-8.711 E.00445 G1 X-42.981 Y-8.66 E.00424 G1 X-43.234 Y-8.574 E.00434 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.68 G1 X-44.482 Y-6.412 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.098 Y-6.361 Z6.8 F30000 G1 X-64.173 Y-6.409 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X-64.179 Y-6.446 E.00123 G3 X-62.902 Y-8.367 I1.729 J-.236 E.08359 G1 X-62.678 Y-8.411 E.00758 G3 X-64.135 Y-6.229 I.228 J1.73 E.26506 G1 X-64.165 Y-6.37 E.0048 G1 X-63.735 Y-6.487 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.759 Y-6.68 E.00596 G3 X-62.789 Y-7.946 I1.309 J-.002 E.05271 G1 X-62.621 Y-7.979 E.00527 G3 X-63.714 Y-6.341 I.171 J1.298 E.18424 G1 X-63.729 Y-6.447 E.00329 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.759 Y-6.68 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.737 Y-7.956 ;WIPE_END G1 X-62.143 Y-4.351 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G3 X-63.351 Y-8.854 I-.314 J-2.329 E.22497 G3 X-62.398 Y-9.03 I.885 J2.129 E.03237 G3 X-62.104 Y-4.357 I-.059 J2.35 E.23123 G1 X-62.086 Y-3.917 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.845 Y-9.096 I-.371 J-2.762 E.23583 G3 X-62.37 Y-9.464 I1.412 J2.515 E.04727 G3 X-62.047 Y-3.923 I-.088 J2.785 E.25364 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.182 Y-4.648 F30000 ;TYPE:Gap infill ;WIDTH:0.241757 G1 F12000 G1 X-61.926 Y-4.699 E.00424 G1 X-61.666 Y-4.786 E.00445 G1 X-61.42 Y-4.908 E.00445 G1 X-61.202 Y-5.054 E.00424 G1 X-61 Y-5.23 E.00434 G1 X-60.824 Y-5.432 E.00434 G1 X-60.678 Y-5.65 E.00424 G1 X-60.556 Y-5.896 E.00445 G1 X-60.469 Y-6.156 E.00445 G1 X-60.418 Y-6.412 E.00424 G1 X-60.4 Y-6.68 E.00434 G1 X-60.418 Y-6.948 E.00434 G1 X-60.469 Y-7.204 E.00424 G1 X-60.556 Y-7.464 E.00445 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.919 Y-8.66 E.00434 G1 X-62.178 Y-8.712 E.00427 G1 X-62.45 Y-8.73 E.00442 G1 X-62.724 Y-8.711 E.00445 G1 X-62.981 Y-8.66 E.00424 G1 X-63.234 Y-8.574 E.00434 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00434 G1 X-64.076 Y-7.928 E.00434 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.431 Y-7.204 E.00445 G1 X-64.482 Y-6.948 E.00424 G1 X-64.5 Y-6.68 E.00434 G1 X-64.482 Y-6.412 E.00434 G1 X-64.431 Y-6.156 E.00424 G1 X-64.344 Y-5.896 E.00445 G1 X-64.222 Y-5.65 E.00445 G1 X-64.076 Y-5.432 E.00424 G1 X-63.9 Y-5.23 E.00434 G1 X-63.698 Y-5.054 E.00434 G1 X-63.48 Y-4.908 E.00424 G1 X-63.234 Y-4.786 E.00445 G1 X-62.974 Y-4.699 E.00445 G1 X-62.718 Y-4.648 E.00424 G1 X-62.45 Y-4.63 E.00434 G1 X-62.222 Y-4.645 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.926 Y-4.699 G1 X-61.666 Y-4.786 G1 X-61.42 Y-4.908 G1 X-61.202 Y-5.054 G1 X-61 Y-5.23 G1 X-60.824 Y-5.432 G1 X-60.678 Y-5.65 G1 X-60.638 Y-5.73 ;WIPE_END G1 X-53.914 Y-9.341 Z6.8 F30000 G1 X7.002 Y-42.052 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X7.002 Y-43.764 E.0568 G1 X7.298 Y-43.764 E.00981 G1 X7.298 Y-42.052 E.0568 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16756 G1 X6.595 Y-44.171 E.0838 G1 X7.705 Y-44.171 E.03682 G1 X7.705 Y-41.645 E.0838 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.606 E.10436 G1 X8.14 Y-44.606 E.06084 G1 X8.14 Y-41.21 E.10436 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.176 Y-43.21 ;WIPE_END G1 X7.002 Y-48.236 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X7.002 Y-49.948 E.0568 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.236 E.0568 G1 X7.042 Y-48.236 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.829 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16756 G1 X6.595 Y-50.355 E.0838 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.829 E.0838 G1 X6.635 Y-47.829 E.03549 G1 X6.16 Y-47.394 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.10436 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.394 E.10436 G1 X6.2 Y-47.394 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.176 Y-49.394 ;WIPE_END G1 X11.701 Y-44.127 Z6.8 F30000 G1 X74.198 Y15.448 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.736 E.0568 G1 X76.598 Y13.736 E.08279 G1 X76.598 Y15.448 E.0568 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16756 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.329 E.15015 G1 X77.005 Y13.329 E.1098 G1 X77.005 Y15.855 E.0838 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y12.894 E.16581 G1 X77.44 Y12.894 E.12844 G1 X77.44 Y16.29 E.10436 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.128 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X74.494 Y14.128 E.0526 G1 X74.494 Y15.056 E.02851 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.168 E.02729 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.958 Y14.592 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.593838 G1 F13891.471 G1 X75.702 Y14.592 E.03339 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13891.471 G1 X74.958 Y14.592 ;WIPE_END G1 X76.598 Y9.264 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X74.102 Y9.264 E.08279 G1 X74.102 Y7.552 E.0568 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.224 E.05547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.671 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16756 G1 X73.695 Y9.671 E.1098 G1 X73.695 Y7.145 E.0838 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.631 E.08248 G1 X77.44 Y10.106 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y10.106 E.12844 G1 X73.26 Y6.71 E.10436 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y10.066 E.10313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y10.085 ;WIPE_END G1 X76.206 Y8.872 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X76.206 Y7.944 E.02851 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.872 E.02851 G1 X76.166 Y8.872 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.958 Y8.408 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.59384 G1 F13891.42 G1 X75.702 Y8.408 E.03339 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13891.42 G1 X74.958 Y8.408 ;WIPE_END G1 X71.036 Y14.956 Z6.8 F30000 G1 X56.76 Y38.79 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z6.8 F30000 G1 X33.602 Y39.152 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16756 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z6.8 F30000 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z6.8 F30000 G1 X35.602 Y-10.448 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16756 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z6.8 F30000 G1 X3.498 Y40.648 Z6.8 G1 Z6.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16756 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16756 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:6.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7 I-.071 J-1.215 P1 F30000 G1 X-73.15 Y44.918 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X-73.322 Y44.831 E.00641 G3 X-72.678 Y41.589 I.876 J-1.511 E.14386 G3 X-72.45 Y45.066 I.224 J1.732 E.18932 G3 X-73.113 Y44.934 I.004 J-1.747 E.02257 G1 X-72.957 Y44.528 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.104 Y44.454 E.00506 G3 X-72.621 Y42.021 I.657 J-1.134 E.09999 G3 X-72.45 Y44.63 I.168 J1.299 E.13159 G3 X-72.92 Y44.542 I.003 J-1.311 E.01479 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.104 Y44.454 G1 X-73.377 Y44.247 G1 X-73.585 Y43.975 G1 X-73.661 Y43.821 G1 X-73.716 Y43.659 G1 X-73.76 Y43.32 G1 X-73.716 Y42.981 G1 X-73.683 Y42.903 ;WIPE_END G1 X-72.779 Y45.647 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X-72.793 Y45.645 E.00045 G3 X-73.059 Y41.047 I.335 J-2.326 E.21362 G3 X-72.414 Y40.969 I.668 J2.825 E.02161 G3 X-72.45 Y45.669 I-.044 J2.35 E.24322 G1 X-72.739 Y45.65 E.00962 G1 X-72.814 Y46.081 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-72.385 Y40.535 I.366 J-2.762 E.25956 G3 X-71.791 Y46.027 I-.067 J2.786 E.24639 G3 X-72.774 Y46.086 I-.656 J-2.707 E.0304 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.724 Y45.351 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-72.45 Y45.37 E.00445 G1 X-72.176 Y45.351 E.00445 G1 X-71.919 Y45.3 E.00424 G1 X-71.666 Y45.214 E.00435 G1 X-71.42 Y45.092 E.00445 G1 X-71.202 Y44.946 E.00424 G1 X-71 Y44.769 E.00435 G1 X-70.82 Y44.563 E.00445 G1 X-70.675 Y44.345 E.00424 G1 X-70.556 Y44.104 E.00435 G1 X-70.47 Y43.851 E.00435 G1 X-70.419 Y43.594 E.00424 G1 X-70.4 Y43.32 E.00445 G1 X-70.419 Y43.046 E.00445 G1 X-70.47 Y42.789 E.00424 G1 X-70.556 Y42.536 E.00435 G1 X-70.675 Y42.295 E.00435 G1 X-70.82 Y42.077 E.00424 G1 X-71 Y41.871 E.00445 G1 X-71.202 Y41.694 E.00435 G1 X-71.42 Y41.548 E.00424 G1 X-71.666 Y41.426 E.00445 G1 X-71.919 Y41.34 E.00435 G1 X-72.176 Y41.289 E.00424 G1 X-72.45 Y41.27 E.00445 G1 X-72.724 Y41.289 E.00445 G1 X-72.981 Y41.34 E.00424 G1 X-73.234 Y41.426 E.00435 G1 X-73.48 Y41.548 E.00445 G1 X-73.698 Y41.694 E.00424 G1 X-73.9 Y41.871 E.00435 G1 X-74.076 Y42.072 E.00434 G1 X-74.222 Y42.29 E.00424 G1 X-74.344 Y42.536 E.00445 G1 X-74.431 Y42.796 E.00445 G1 X-74.482 Y43.052 E.00424 G1 X-74.5 Y43.32 E.00435 G1 X-74.482 Y43.588 E.00435 G1 X-74.431 Y43.844 E.00424 G1 X-74.344 Y44.104 E.00445 G1 X-74.222 Y44.35 E.00445 G1 X-74.076 Y44.568 E.00424 G1 X-73.899 Y44.769 E.00434 G1 X-73.698 Y44.946 E.00435 G1 X-73.48 Y45.092 E.00424 G1 X-73.234 Y45.214 E.00445 G1 X-72.981 Y45.3 E.00434 G1 X-72.763 Y45.343 E.00359 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.37 G1 X-72.176 Y45.351 G1 X-71.919 Y45.3 G1 X-71.666 Y45.214 G1 X-71.42 Y45.092 G1 X-71.202 Y44.946 G1 X-71 Y44.769 G1 X-70.95 Y44.712 ;WIPE_END G1 X-63.318 Y44.754 Z7 F30000 G1 X-33.14 Y44.923 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X-33.322 Y44.831 E.00679 G3 X-32.678 Y41.589 I.876 J-1.511 E.14386 G3 X-32.45 Y45.066 I.224 J1.732 E.18932 G3 X-33.103 Y44.938 I.004 J-1.747 E.0222 G1 X-32.951 Y44.53 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.621 Y42.021 I.504 J-1.21 E.10526 G3 X-32.45 Y44.63 I.168 J1.299 E.13159 G3 X-32.914 Y44.544 I.003 J-1.311 E.01458 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.248 Y44.36 G1 X-33.49 Y44.118 G1 X-33.585 Y43.975 G1 X-33.716 Y43.659 G1 X-33.749 Y43.491 G1 X-33.749 Y43.149 G1 X-33.716 Y42.981 G1 X-33.686 Y42.909 ;WIPE_END G1 X-32.45 Y45.672 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G3 X-33.059 Y41.047 I-.008 J-2.352 E.22515 G3 X-32.414 Y40.969 I.668 J2.825 E.02161 G3 X-32.41 Y45.671 I-.044 J2.351 E.24204 G1 X-32.45 Y46.106 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-32.385 Y40.535 I0 J-2.786 E.27093 G3 X-29.743 Y42.661 I-.072 J2.795 E.11199 G3 X-32.41 Y46.106 I-2.707 J.659 E.15367 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.45 Y45.37 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-32.176 Y45.351 E.00445 G1 X-31.919 Y45.3 E.00424 G1 X-31.666 Y45.214 E.00434 G1 X-31.42 Y45.092 E.00445 G1 X-31.202 Y44.946 E.00424 G1 X-31.001 Y44.769 E.00434 G1 X-30.824 Y44.568 E.00434 G1 X-30.678 Y44.35 E.00424 G1 X-30.556 Y44.104 E.00445 G1 X-30.469 Y43.844 E.00445 G1 X-30.418 Y43.588 E.00424 G1 X-30.4 Y43.32 E.00435 G1 X-30.418 Y43.052 E.00435 G1 X-30.467 Y42.805 E.00408 G1 X-30.556 Y42.536 E.00461 G1 X-30.678 Y42.29 E.00445 G1 X-30.824 Y42.072 E.00424 G1 X-31.001 Y41.871 E.00434 G1 X-31.202 Y41.694 E.00434 G1 X-31.42 Y41.548 E.00424 G1 X-31.666 Y41.426 E.00445 G1 X-31.919 Y41.34 E.00435 G1 X-32.176 Y41.289 E.00424 G1 X-32.45 Y41.27 E.00445 G1 X-32.724 Y41.289 E.00445 G1 X-32.981 Y41.34 E.00424 G1 X-33.234 Y41.426 E.00435 G1 X-33.48 Y41.548 E.00445 G1 X-33.698 Y41.694 E.00424 G1 X-33.899 Y41.871 E.00435 G1 X-34.076 Y42.072 E.00434 G1 X-34.222 Y42.29 E.00424 G1 X-34.344 Y42.536 E.00445 G1 X-34.431 Y42.796 E.00445 G1 X-34.482 Y43.052 E.00424 G1 X-34.5 Y43.32 E.00435 G1 X-34.482 Y43.588 E.00435 G1 X-34.431 Y43.844 E.00424 G1 X-34.344 Y44.104 E.00445 G1 X-34.222 Y44.35 E.00445 G1 X-34.076 Y44.568 E.00424 G1 X-33.899 Y44.769 E.00434 G1 X-33.698 Y44.946 E.00435 G1 X-33.48 Y45.092 E.00424 G1 X-33.234 Y45.214 E.00445 G1 X-32.981 Y45.3 E.00435 G1 X-32.724 Y45.351 E.00424 G1 X-32.49 Y45.367 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.176 Y45.351 G1 X-31.919 Y45.3 G1 X-31.666 Y45.214 G1 X-31.42 Y45.092 G1 X-31.202 Y44.946 G1 X-31.001 Y44.769 G1 X-30.824 Y44.568 G1 X-30.777 Y44.499 ;WIPE_END G1 X-32.271 Y37.014 Z7 F30000 G1 X-40.852 Y-5.98 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X-40.94 Y-5.808 E.00639 G3 X-42.902 Y-8.367 I-1.51 J-.873 E.2272 G1 X-42.678 Y-8.411 E.00758 G3 X-40.838 Y-6.017 I.228 J1.73 E.1211 G1 X-41.241 Y-6.179 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-42.789 Y-7.946 I-1.209 J-.502 E.16318 G1 X-42.621 Y-7.979 E.00527 G3 X-41.227 Y-6.217 I.171 J1.298 E.08305 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.41 Y-5.882 G1 X-41.652 Y-5.64 G1 X-41.795 Y-5.545 G1 X-41.949 Y-5.469 G1 X-42.279 Y-5.381 G1 X-42.621 Y-5.381 G1 X-42.789 Y-5.414 G1 X-42.863 Y-5.439 ;WIPE_END G1 X-44.116 Y-8.346 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G3 X-43.059 Y-8.953 I1.659 J1.665 E.04091 G3 X-42.414 Y-9.031 I.668 J2.825 E.02161 G3 X-44.144 Y-8.318 I-.044 J2.349 E.42591 G1 X-44.425 Y-8.655 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-43.518 Y-9.257 I1.966 J1.975 E.03368 G3 X-42.385 Y-9.465 I1.049 J2.522 E.03564 G3 X-44.453 Y-8.626 I-.073 J2.786 E.46751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-43.899 Y-8.129 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-44.076 Y-7.928 E.00435 G1 X-44.222 Y-7.71 E.00424 G1 X-44.344 Y-7.464 E.00445 G1 X-44.431 Y-7.204 E.00445 G1 X-44.482 Y-6.948 E.00424 G1 X-44.5 Y-6.687 E.00424 G1 X-44.481 Y-6.406 E.00455 G1 X-44.43 Y-6.149 E.00424 G1 X-44.344 Y-5.896 E.00435 G1 X-44.225 Y-5.655 E.00435 G1 X-44.08 Y-5.437 E.00424 G1 X-43.9 Y-5.231 E.00445 G1 X-43.693 Y-5.05 E.00445 G1 X-43.475 Y-4.905 E.00424 G1 X-43.234 Y-4.786 E.00434 G1 X-42.981 Y-4.7 E.00435 G1 X-42.724 Y-4.649 E.00424 G1 X-42.45 Y-4.63 E.00445 G1 X-42.176 Y-4.649 E.00445 G1 X-41.919 Y-4.7 E.00424 G1 X-41.666 Y-4.786 E.00435 G1 X-41.425 Y-4.905 E.00435 G1 X-41.207 Y-5.05 E.00424 G1 X-41.001 Y-5.23 E.00445 G1 X-40.82 Y-5.437 E.00445 G1 X-40.675 Y-5.655 E.00424 G1 X-40.556 Y-5.896 E.00435 G1 X-40.47 Y-6.149 E.00435 G1 X-40.419 Y-6.406 E.00424 G1 X-40.4 Y-6.68 E.00445 G1 X-40.419 Y-6.954 E.00445 G1 X-40.47 Y-7.211 E.00424 G1 X-40.556 Y-7.464 E.00435 G1 X-40.675 Y-7.705 E.00434 G1 X-40.82 Y-7.923 E.00424 G1 X-41.001 Y-8.129 E.00445 G1 X-41.202 Y-8.306 E.00434 G1 X-41.42 Y-8.452 E.00424 G1 X-41.666 Y-8.574 E.00445 G1 X-41.926 Y-8.661 E.00445 G1 X-42.182 Y-8.712 E.00424 G1 X-42.45 Y-8.73 E.00435 G1 X-42.718 Y-8.712 E.00435 G1 X-42.974 Y-8.661 E.00424 G1 X-43.234 Y-8.574 E.00445 G1 X-43.48 Y-8.452 E.00445 G1 X-43.698 Y-8.306 E.00424 G1 X-43.869 Y-8.156 E.0037 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.076 Y-7.928 G1 X-44.222 Y-7.71 G1 X-44.344 Y-7.464 G1 X-44.431 Y-7.204 G1 X-44.482 Y-6.948 G1 X-44.5 Y-6.687 G1 X-44.481 Y-6.406 G1 X-44.466 Y-6.331 ;WIPE_END G1 X-52.099 Y-6.366 Z7 F30000 G1 X-64.175 Y-6.421 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X-64.18 Y-6.452 E.00105 G3 X-62.902 Y-8.367 I1.729 J-.23 E.08338 G1 X-62.678 Y-8.411 E.00758 G3 X-64.135 Y-6.229 I.228 J1.73 E.26506 G1 X-64.167 Y-6.382 E.00519 G1 X-63.748 Y-6.509 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-62.789 Y-7.946 I1.298 J-.172 E.05796 G1 X-62.621 Y-7.979 E.00527 G3 X-63.742 Y-6.47 I.171 J1.298 E.18828 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.749 Y-6.851 G1 X-63.661 Y-7.181 G1 X-63.585 Y-7.335 G1 X-63.377 Y-7.607 G1 X-63.248 Y-7.72 G1 X-63.105 Y-7.815 G1 X-62.789 Y-7.946 G1 X-62.713 Y-7.961 ;WIPE_END G1 X-62.143 Y-4.349 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G3 X-63.059 Y-8.953 I-.314 J-2.331 E.23536 G3 X-62.414 Y-9.031 I.668 J2.825 E.02161 G3 X-62.104 Y-4.355 I-.044 J2.351 E.23183 G1 X-62.086 Y-3.918 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.518 Y-9.257 I-.372 J-2.762 E.24711 G3 X-62.385 Y-9.465 I1.049 J2.522 E.03564 G3 X-62.047 Y-3.923 I-.073 J2.786 E.25408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.176 Y-4.649 F30000 ;TYPE:Gap infill ;WIDTH:0.241779 G1 F12000 G1 X-61.919 Y-4.7 E.00424 G1 X-61.666 Y-4.786 E.00435 G1 X-61.425 Y-4.905 E.00435 G1 X-61.207 Y-5.05 E.00424 G1 X-61.001 Y-5.231 E.00445 G1 X-60.82 Y-5.437 E.00445 G1 X-60.675 Y-5.655 E.00424 G1 X-60.556 Y-5.896 E.00434 G1 X-60.47 Y-6.149 E.00435 G1 X-60.419 Y-6.406 E.00424 G1 X-60.4 Y-6.68 E.00445 G1 X-60.419 Y-6.954 E.00445 G1 X-60.47 Y-7.211 E.00424 G1 X-60.556 Y-7.464 E.00435 G1 X-60.675 Y-7.705 E.00434 G1 X-60.82 Y-7.923 E.00424 G1 X-61.001 Y-8.129 E.00445 G1 X-61.202 Y-8.306 E.00434 G1 X-61.42 Y-8.452 E.00424 G1 X-61.666 Y-8.574 E.00445 G1 X-61.926 Y-8.661 E.00445 G1 X-62.182 Y-8.712 E.00424 G1 X-62.45 Y-8.73 E.00435 G1 X-62.718 Y-8.712 E.00435 G1 X-62.974 Y-8.661 E.00424 G1 X-63.234 Y-8.574 E.00445 G1 X-63.48 Y-8.452 E.00445 G1 X-63.698 Y-8.306 E.00424 G1 X-63.899 Y-8.129 E.00435 G1 X-64.076 Y-7.928 E.00435 G1 X-64.222 Y-7.71 E.00424 G1 X-64.344 Y-7.464 E.00445 G1 X-64.431 Y-7.204 E.00445 G1 X-64.482 Y-6.948 E.00424 G1 X-64.5 Y-6.687 E.00424 G1 X-64.481 Y-6.406 E.00455 G1 X-64.43 Y-6.149 E.00424 G1 X-64.344 Y-5.896 E.00434 G1 X-64.225 Y-5.655 E.00435 G1 X-64.08 Y-5.437 E.00424 G1 X-63.899 Y-5.231 E.00445 G1 X-63.693 Y-5.05 E.00445 G1 X-63.475 Y-4.905 E.00424 G1 X-63.234 Y-4.786 E.00434 G1 X-62.981 Y-4.7 E.00435 G1 X-62.724 Y-4.649 E.00424 G1 X-62.45 Y-4.63 E.00445 G1 X-62.216 Y-4.646 E.0038 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.919 Y-4.7 G1 X-61.666 Y-4.786 G1 X-61.425 Y-4.905 G1 X-61.207 Y-5.05 G1 X-61.001 Y-5.231 G1 X-60.82 Y-5.437 G1 X-60.675 Y-5.655 G1 X-60.635 Y-5.736 ;WIPE_END G1 X-53.911 Y-9.346 Z7 F30000 G1 X7.002 Y-42.052 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X7.002 Y-43.647 E.05292 G1 X7.298 Y-43.647 E.00981 G1 X7.298 Y-42.052 E.05292 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16598 G1 X6.595 Y-44.054 E.07993 G1 X7.705 Y-44.054 E.03682 G1 X7.705 Y-41.645 E.07993 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.489 E.10077 G1 X8.14 Y-44.489 E.06084 G1 X8.14 Y-41.21 E.10077 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.176 Y-43.21 ;WIPE_END G1 X7.002 Y-48.353 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X7.002 Y-49.948 E.05292 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.353 E.05292 G1 X7.042 Y-48.353 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.946 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16598 G1 X6.595 Y-50.355 E.07993 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.946 E.07993 G1 X6.635 Y-47.946 E.03549 G1 X6.16 Y-47.511 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.10077 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.511 E.10077 G1 X6.2 Y-47.511 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.176 Y-49.51 ;WIPE_END G1 X11.695 Y-44.239 Z7 F30000 G1 X74.198 Y15.448 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.853 E.05292 G1 X76.598 Y13.853 E.08279 G1 X76.598 Y15.448 E.05292 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16598 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.446 E.14627 G1 X77.005 Y13.446 E.1098 G1 X77.005 Y15.855 E.07993 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.011 E.16222 G1 X77.44 Y13.011 E.12844 G1 X77.44 Y16.29 E.10077 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z7 F30000 G1 Z6.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.245 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X74.494 Y14.245 E.0526 G1 X74.494 Y15.056 E.02492 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.285 E.0237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.9 Y14.65 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.476982 G1 F15000 G1 X75.76 Y14.65 E.03044 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.9 Y14.65 ;WIPE_END G1 X76.598 Y9.147 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X74.102 Y9.147 E.08279 G1 X74.102 Y7.552 E.05292 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.107 E.05159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.554 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16598 G1 X73.695 Y9.554 E.1098 G1 X73.695 Y7.145 E.07993 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.514 E.0786 G1 X77.44 Y9.989 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y9.989 E.12844 G1 X73.26 Y6.71 E.10077 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.949 E.09954 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.969 ;WIPE_END G1 X76.206 Y8.755 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X76.206 Y7.944 E.02492 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.755 E.02492 G1 X76.166 Y8.755 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.9 Y8.35 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.476984 G1 F15000 G1 X75.76 Y8.35 E.03044 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.9 Y8.35 ;WIPE_END G1 X70.993 Y14.906 Z7 F30000 G1 X56.76 Y38.79 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z7 F30000 G1 X33.602 Y39.152 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16598 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z7 F30000 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z7 F30000 G1 X35.602 Y-10.448 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16598 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z7 F30000 G1 X3.498 Y40.648 Z7 G1 Z6.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16598 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16598 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:6.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;6.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;6.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.2 I-.073 J-1.215 P1 F30000 G1 X-73.238 Y45.095 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X-73.424 Y45.007 E.00682 G3 X-73.422 Y41.636 I.966 J-1.685 E.1354 G3 X-72.547 Y41.382 I.951 J1.641 E.03054 G3 X-73.195 Y45.119 I.089 J1.94 E.23043 G1 X-73.203 Y45.115 E.00031 G1 X-73.046 Y44.705 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.206 Y44.629 E.00544 G3 X-73.027 Y41.926 I.748 J-1.308 E.10347 G3 X-72.518 Y41.816 I.593 J1.507 E.01607 G3 X-73.01 Y44.723 I.06 J1.505 E.16465 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.757 Y45.651 F30000 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G3 X-72.757 Y40.987 I.298 J-2.332 E.22521 G3 X-72.43 Y40.968 I.235 J1.235 E.01092 G3 X-72.717 Y45.656 I-.03 J2.351 E.25263 G1 X-72.814 Y46.084 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-73.518 Y40.743 I.357 J-2.764 E.2246 G3 X-72.401 Y40.534 I1.052 J2.532 E.03516 G3 X-72.774 Y46.089 I-.056 J2.786 E.27708 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.172 Y46.014 G1 X-73.518 Y45.897 G1 X-73.886 Y45.709 G1 X-74.148 Y45.533 G1 X-74.423 Y45.293 G1 X-74.512 Y45.19 ;WIPE_END G1 X-66.88 Y45.174 Z7.2 F30000 G1 X-33.227 Y45.1 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X-33.423 Y45.006 E.00723 G3 X-33.422 Y41.636 I.965 J-1.685 E.13537 G3 X-32.547 Y41.382 I.951 J1.641 E.03054 G3 X-33.192 Y45.119 I.088 J1.94 E.23021 G1 X-33.034 Y44.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.206 Y44.629 E.00583 G3 X-33.027 Y41.926 I.748 J-1.308 E.10347 G3 X-32.518 Y41.816 I.593 J1.507 E.01607 G3 X-32.999 Y44.728 I.06 J1.505 E.16427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.206 Y44.629 G1 X-33.368 Y44.517 G1 X-33.517 Y44.387 G1 X-33.647 Y44.238 G1 X-33.756 Y44.074 G1 X-33.844 Y43.897 G1 X-33.907 Y43.71 G1 X-33.946 Y43.517 G1 X-33.958 Y43.32 G1 X-33.946 Y43.128 ;WIPE_END G1 X-32.45 Y45.67 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G3 X-32.757 Y40.987 I-.009 J-2.351 E.23543 G3 X-32.43 Y40.968 I.235 J1.235 E.01092 G3 X-32.41 Y45.67 I-.03 J2.351 E.24244 G1 X-32.45 Y46.106 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-33.518 Y40.743 I-.007 J-2.786 E.23576 G3 X-32.401 Y40.534 I1.052 J2.532 E.03516 G3 X-32.41 Y46.105 I-.056 J2.786 E.26581 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.814 Y46.086 G1 X-33.172 Y46.014 G1 X-33.518 Y45.897 G1 X-33.845 Y45.736 G1 X-34.148 Y45.533 G1 X-34.25 Y45.444 ;WIPE_END G1 X-35.198 Y37.87 Z7.2 F30000 G1 X-40.676 Y-5.891 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X-40.773 Y-5.712 E.00677 G3 X-43.422 Y-8.364 I-1.685 J-.966 E.23658 G3 X-42.547 Y-8.618 I.951 J1.641 E.03054 G3 X-40.662 Y-5.939 I.089 J1.94 E.12927 G1 X-40.665 Y-5.93 E.00034 G1 X-41.068 Y-6.082 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-41.219 Y-5.821 E.00927 G3 X-43.027 Y-8.074 I-1.239 J-.857 E.17225 G3 X-42.518 Y-8.184 I.593 J1.507 E.01607 G3 X-41.058 Y-6.121 I.06 J1.506 E.09212 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-41.219 Y-5.821 G1 X-41.383 Y-5.613 G1 X-41.532 Y-5.483 G1 X-41.696 Y-5.374 G1 X-41.873 Y-5.286 G1 X-42.06 Y-5.223 G1 X-42.253 Y-5.184 G1 X-42.45 Y-5.172 G1 X-42.647 Y-5.184 G1 X-42.66 Y-5.187 ;WIPE_END G1 X-44.118 Y-8.348 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G3 X-42.757 Y-9.013 I1.659 J1.667 E.05116 G3 X-42.43 Y-9.032 I.235 J1.235 E.01092 G3 X-44.146 Y-8.319 I-.03 J2.351 E.42669 G1 X-44.424 Y-8.654 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-43.518 Y-9.257 I1.967 J1.974 E.03367 G3 X-42.401 Y-9.466 I1.052 J2.532 E.03516 G3 X-44.452 Y-8.626 I-.056 J2.786 E.468 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.148 Y-8.893 G1 X-43.845 Y-9.096 G1 X-43.518 Y-9.257 G1 X-43.172 Y-9.375 G1 X-42.814 Y-9.446 G1 X-42.679 Y-9.452 ;WIPE_END G1 X-50.236 Y-8.383 Z7.2 F30000 G1 X-64.369 Y-6.383 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X-64.384 Y-6.425 E.00149 G3 X-63.422 Y-8.364 I1.926 J-.253 E.07613 G3 X-62.547 Y-8.618 I.951 J1.641 E.03054 G3 X-64.334 Y-6.175 I.089 J1.94 E.28965 G1 X-64.362 Y-6.344 E.00566 G1 X-63.943 Y-6.468 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-63.952 Y-6.482 E.00053 G3 X-63.027 Y-8.074 I1.494 J-.196 E.06085 G3 X-62.518 Y-8.184 I.593 J1.507 E.01607 G3 X-63.914 Y-6.288 I.06 J1.506 E.20789 G1 X-63.936 Y-6.428 E.00437 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-63.952 Y-6.482 G1 X-63.958 Y-6.68 G1 X-63.946 Y-6.877 G1 X-63.907 Y-7.07 G1 X-63.844 Y-7.257 G1 X-63.756 Y-7.434 G1 X-63.647 Y-7.598 G1 X-63.517 Y-7.747 G1 X-63.368 Y-7.877 G1 X-63.204 Y-7.986 G1 X-63.054 Y-8.06 ;WIPE_END G1 X-62.143 Y-4.351 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G3 X-62.757 Y-9.013 I-.316 J-2.33 E.24562 G3 X-62.43 Y-9.032 I.235 J1.235 E.01092 G3 X-62.104 Y-4.357 I-.03 J2.351 E.23222 G1 X-62.086 Y-3.918 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G3 X-63.518 Y-9.257 I-.371 J-2.762 E.24702 G3 X-62.401 Y-9.466 I1.052 J2.532 E.03516 G3 X-62.047 Y-3.923 I-.056 J2.786 E.25466 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-62.45 Y-3.89 G1 X-62.814 Y-3.914 G1 X-63.172 Y-3.986 G1 X-63.518 Y-4.103 G1 X-63.845 Y-4.264 G1 X-63.958 Y-4.34 ;WIPE_END G1 X-57.218 Y-7.922 Z7.2 F30000 G1 X7.002 Y-42.052 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X7.002 Y-43.608 E.0516 G1 X7.298 Y-43.608 E.00981 G1 X7.298 Y-42.052 E.0516 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14280 G1 X6.595 Y-44.015 E.07861 G1 X7.705 Y-44.015 E.03682 G1 X7.705 Y-41.645 E.07861 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.45 E.09955 G1 X8.14 Y-44.45 E.06084 G1 X8.14 Y-41.21 E.09955 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.392 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X7.002 Y-49.948 E.0516 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.392 E.0516 G1 X7.042 Y-48.392 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.985 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14280 G1 X6.595 Y-50.355 E.07861 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.985 E.07861 G1 X6.635 Y-47.985 E.03549 G1 X6.16 Y-47.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.09955 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.55 E.09955 G1 X6.2 Y-47.55 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.55 ;WIPE_END G1 X11.694 Y-44.277 Z7.2 F30000 G1 X74.198 Y15.448 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.892 E.0516 G1 X76.598 Y13.892 E.08279 G1 X76.598 Y15.448 E.0516 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14280 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.485 E.14495 G1 X77.005 Y13.485 E.1098 G1 X77.005 Y15.855 E.07861 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.05 E.161 G1 X77.44 Y13.05 E.12844 G1 X77.44 Y16.29 E.09955 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.284 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F14280 G1 X74.494 Y14.284 E.0526 G1 X74.494 Y15.056 E.0237 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.324 E.02247 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.88 Y14.67 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4372 G1 F14280 G1 X75.78 Y14.67 E.02893 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.88 Y14.67 ;WIPE_END G1 X76.598 Y9.108 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X74.102 Y9.108 E.08279 G1 X74.102 Y7.552 E.0516 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.068 E.05027 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.515 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14280 G1 X73.695 Y9.515 E.1098 G1 X73.695 Y7.145 E.07861 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.475 E.07728 G1 X77.44 Y9.95 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y9.95 E.12844 G1 X73.26 Y6.71 E.09955 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.91 E.09832 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.929 ;WIPE_END G1 X76.206 Y8.716 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F14280 G1 X76.206 Y7.944 E.0237 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.716 E.0237 G1 X76.166 Y8.716 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.88 Y8.33 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4372 G1 F14280 G1 X75.78 Y8.33 E.02893 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.88 Y8.33 ;WIPE_END G1 X70.978 Y14.889 Z7.2 F30000 G1 X56.76 Y38.79 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z7.2 F30000 G1 X33.602 Y39.152 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14280 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z7.2 F30000 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F14280 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F14280 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z7.2 F30000 G1 X35.602 Y-10.448 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14280 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z7.2 F30000 G1 X3.498 Y40.648 Z7.2 G1 Z6.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14280 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14280 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:7 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;7 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.4 I-.07 J-1.215 P1 F30000 M73 P38 R68 G1 X-73.135 Y44.881 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-73.305 Y44.8 E.00576 G3 X-73.303 Y41.842 I.847 J-1.479 E.11008 G3 X-72.573 Y41.622 I.832 J1.434 E.02366 G3 X-73.1 Y44.9 I.115 J1.7 E.18825 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.305 Y44.8 G1 X-73.489 Y44.674 G1 X-73.657 Y44.527 G1 X-73.804 Y44.359 G1 X-73.928 Y44.173 G1 X-74.027 Y43.973 G1 X-74.098 Y43.762 G1 X-74.142 Y43.543 G1 X-74.156 Y43.333 ;WIPE_END G1 X-72.814 Y46.084 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-73.172 Y40.626 I.357 J-2.764 E.23586 G3 X-72.417 Y40.533 I.808 J3.453 E.02343 G3 X-72.774 Y46.089 I-.041 J2.787 E.27756 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.738 Y45.549 F30000 ;TYPE:Gap infill ;WIDTH:0.688642 G1 F11851.946 G1 X-72.471 Y45.566 E.01408 G2 X-74.698 Y43.32 I.019 J-2.245 E.5577 G1 X-74.678 Y43.613 E.01547 G1 X-74.621 Y43.902 E.01547 G1 X-74.527 Y44.18 E.01547 G1 X-74.397 Y44.444 E.01547 G1 X-74.233 Y44.688 E.01547 G1 X-74.039 Y44.909 E.01547 G1 X-73.818 Y45.103 E.01547 G1 X-73.589 Y45.257 E.01453 G2 X-72.777 Y45.542 I1.137 J-1.936 E.04554 G1 E-.8 F1800 ;WIPE_START G1 F11851.946 G1 X-72.471 Y45.566 G1 X-72.157 Y45.548 G1 X-71.848 Y45.485 G1 X-71.59 Y45.397 G1 X-71.345 Y45.276 G1 X-71.082 Y45.103 G1 X-70.93 Y44.97 ;WIPE_END G1 X-63.297 Y44.953 Z7.4 F30000 G1 X-33.123 Y44.887 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.305 Y44.8 E.00619 G3 X-33.303 Y41.842 I.847 J-1.479 E.11008 G3 X-32.573 Y41.622 I.832 J1.434 E.02366 G3 X-33.087 Y44.905 I.115 J1.7 E.18782 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.305 Y44.8 G1 X-33.489 Y44.674 G1 X-33.657 Y44.527 G1 X-33.804 Y44.359 G1 X-33.928 Y44.173 G1 X-34.027 Y43.973 G1 X-34.098 Y43.762 G1 X-34.142 Y43.543 G1 X-34.155 Y43.347 ;WIPE_END G1 X-32.45 Y46.107 Z7.4 F30000 G1 Z7 M73 P38 R67 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-33.172 Y40.626 I-.007 J-2.787 E.24707 G3 X-32.417 Y40.533 I.808 J3.453 E.02343 G3 X-32.41 Y46.106 I-.041 J2.787 E.26635 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.441 Y45.565 F30000 ;TYPE:Gap infill ;WIDTH:0.688603 G1 F11852.662 G1 X-32.157 Y45.548 E.015 G2 X-34.697 Y43.299 I-.293 J-2.228 E.54055 G1 X-34.678 Y43.613 E.01658 G1 X-34.621 Y43.902 E.01547 G1 X-34.527 Y44.18 E.01547 G1 X-34.397 Y44.444 E.01547 G1 X-34.233 Y44.688 E.01547 G1 X-34.039 Y44.909 E.01547 G1 X-33.818 Y45.103 E.01547 G1 X-33.589 Y45.257 E.01453 G2 X-32.481 Y45.567 I1.139 J-1.937 E.0612 G1 E-.8 F1800 ;WIPE_START G1 F11852.662 G1 X-32.157 Y45.548 G1 X-31.848 Y45.485 G1 X-31.59 Y45.397 G1 X-31.345 Y45.276 G1 X-31.082 Y45.103 G1 X-30.861 Y44.909 G1 X-30.725 Y44.755 ;WIPE_END G1 X-32.224 Y37.271 Z7.4 F30000 G1 X-40.89 Y-5.994 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.98 Y-5.831 E.00572 G3 X-43.303 Y-8.158 I-1.478 J-.847 E.1923 G3 X-42.573 Y-8.378 I.831 J1.434 E.02366 G3 X-40.881 Y-6.033 I.115 J1.7 E.10612 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.98 Y-5.831 G1 X-41.096 Y-5.641 G1 X-41.243 Y-5.473 G1 X-41.411 Y-5.326 G1 X-41.597 Y-5.202 G1 X-41.797 Y-5.103 G1 X-42.008 Y-5.032 G1 X-42.227 Y-4.988 G1 X-42.44 Y-4.974 ;WIPE_END G1 X-44.425 Y-8.655 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-43.172 Y-9.375 I1.967 J1.974 E.04491 G3 X-42.417 Y-9.467 I.808 J3.453 E.02343 G3 X-44.453 Y-8.626 I-.041 J2.787 E.46852 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.042 Y-8.266 F30000 ;TYPE:Gap infill ;WIDTH:0.688611 G1 F11852.512 G1 X-44.23 Y-8.046 E.01524 G2 X-44.697 Y-6.701 I1.784 J1.372 E.0762 G1 X-44.678 Y-6.387 E.01658 G1 X-44.621 Y-6.098 E.01547 G1 X-44.527 Y-5.82 E.01547 G1 X-44.397 Y-5.556 E.01547 G1 X-44.233 Y-5.312 E.01547 G1 X-44.039 Y-5.091 E.01547 G1 X-43.818 Y-4.897 E.01547 G1 X-43.574 Y-4.733 E.01547 G1 X-43.31 Y-4.603 E.01547 G1 X-43.032 Y-4.509 E.01547 G1 X-42.743 Y-4.452 E.01547 G1 X-42.45 Y-4.432 E.01547 G1 X-42.157 Y-4.452 E.01547 G1 X-41.868 Y-4.509 E.01547 G1 X-41.59 Y-4.603 E.01547 G1 X-41.326 Y-4.733 E.01547 G1 X-41.082 Y-4.897 E.01547 G1 X-40.861 Y-5.091 E.01547 G1 X-40.667 Y-5.312 E.01547 G1 X-40.503 Y-5.556 E.01547 G1 X-40.373 Y-5.82 E.01547 G1 X-40.279 Y-6.098 E.01547 G1 X-40.222 Y-6.387 E.01547 G1 X-40.202 Y-6.68 E.01547 G1 X-40.222 Y-6.973 E.01547 G1 X-40.279 Y-7.262 E.01547 G1 X-40.373 Y-7.54 E.01547 G1 X-40.503 Y-7.804 E.01547 G1 X-40.667 Y-8.048 E.01547 G1 X-40.861 Y-8.269 E.01547 G1 X-41.082 Y-8.463 E.01547 G1 X-41.311 Y-8.617 E.01453 G2 X-44.012 Y-8.29 I-1.135 J1.943 E.15371 G1 E-.8 F1800 ;WIPE_START G1 F11852.512 G1 X-44.23 Y-8.046 G1 X-44.387 Y-7.819 G1 X-44.527 Y-7.539 G1 X-44.621 Y-7.262 G1 X-44.678 Y-6.973 G1 X-44.697 Y-6.701 G1 X-44.684 Y-6.478 ;WIPE_END G1 X-52.316 Y-6.458 Z7.4 F30000 G1 X-64.136 Y-6.429 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-64.148 Y-6.456 E.00093 G3 X-63.303 Y-8.158 I1.69 J-.221 E.06191 G3 X-62.573 Y-8.378 I.831 J1.434 E.02366 G3 X-64.104 Y-6.237 I.115 J1.701 E.23662 G1 X-64.13 Y-6.389 E.00475 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-64.148 Y-6.456 G1 X-64.156 Y-6.68 G1 X-64.142 Y-6.903 G1 X-64.098 Y-7.122 G1 X-64.027 Y-7.333 G1 X-63.928 Y-7.533 G1 X-63.804 Y-7.719 G1 X-63.657 Y-7.887 G1 X-63.489 Y-8.034 G1 X-63.369 Y-8.114 ;WIPE_END G1 X-62.087 Y-3.92 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-63.172 Y-9.375 I-.371 J-2.762 E.2582 G3 X-62.417 Y-9.467 I.808 J3.453 E.02343 G3 X-62.047 Y-3.925 I-.041 J2.786 E.25506 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.152 Y-4.452 F30000 ;TYPE:Gap infill ;WIDTH:0.68865 G1 F11851.803 G1 X-61.868 Y-4.509 E.01522 G1 X-61.59 Y-4.603 E.01547 G1 X-61.326 Y-4.733 E.01547 G1 X-61.082 Y-4.897 E.01547 G1 X-60.861 Y-5.091 E.01547 G1 X-60.667 Y-5.312 E.01547 G1 X-60.503 Y-5.556 E.01547 G1 X-60.373 Y-5.82 E.01547 G1 X-60.279 Y-6.098 E.01547 G1 X-60.222 Y-6.387 E.01547 G1 X-60.202 Y-6.68 E.01547 G1 X-60.222 Y-6.973 E.01547 G1 X-60.279 Y-7.262 E.01547 G1 X-60.373 Y-7.54 E.01547 G1 X-60.503 Y-7.804 E.01547 G1 X-60.667 Y-8.048 E.01547 G1 X-60.861 Y-8.269 E.01547 G1 X-61.082 Y-8.463 E.01547 G1 X-61.311 Y-8.617 E.01453 G2 X-64.698 Y-6.68 I-1.135 J1.944 E.24831 G1 X-64.678 Y-6.387 E.01547 G1 X-64.621 Y-6.098 E.01547 G1 X-64.527 Y-5.82 E.01547 G1 X-64.397 Y-5.556 E.01547 G1 X-64.233 Y-5.312 E.01547 G1 X-64.039 Y-5.091 E.01547 G1 X-63.818 Y-4.897 E.01547 G1 X-63.574 Y-4.733 E.01547 G1 X-63.31 Y-4.603 E.01547 G1 X-63.032 Y-4.509 E.01547 G1 X-62.743 Y-4.452 E.01547 G1 X-62.45 Y-4.432 E.01547 G1 X-62.192 Y-4.449 E.01362 G1 E-.8 F1800 ;WIPE_START G1 F11851.803 G1 X-61.868 Y-4.509 G1 X-61.59 Y-4.603 G1 X-61.326 Y-4.733 G1 X-61.082 Y-4.897 G1 X-60.861 Y-5.091 G1 X-60.667 Y-5.312 G1 X-60.555 Y-5.479 ;WIPE_END G1 X-53.843 Y-9.113 Z7.4 F30000 G1 X7.002 Y-42.052 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13556 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13556 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13556 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13556 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X11.692 Y-44.315 Z7.4 F30000 G1 X74.198 Y15.448 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13556 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13556 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z7.4 F30000 G1 Z7 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13556 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F13556 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13556 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13556 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13556 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F13556 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X70.963 Y14.873 Z7.4 F30000 G1 X56.76 Y38.79 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z7.4 F30000 G1 X33.602 Y39.152 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13556 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13556 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z7.4 F30000 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13556 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F13556 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z7.4 F30000 G1 X35.602 Y-10.448 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13556 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13556 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z7.4 F30000 G1 X3.498 Y40.648 Z7.4 G1 Z7 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13556 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13556 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:7.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.6 I-.073 J-1.215 P1 F30000 G1 X-73.224 Y45.057 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-73.403 Y44.971 E.00611 G3 X-73.402 Y41.671 I.946 J-1.65 E.1228 G3 X-72.627 Y41.427 I.93 J1.604 E.02516 G3 X-73.179 Y45.081 I.17 J1.894 E.21154 G1 X-73.189 Y45.076 E.00032 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-73.403 Y44.971 G1 X-73.609 Y44.831 G1 X-73.797 Y44.667 G1 X-73.961 Y44.479 G1 X-74.099 Y44.272 G1 X-74.21 Y44.049 G1 X-74.29 Y43.813 G1 X-74.338 Y43.569 G1 X-74.339 Y43.552 ;WIPE_END G1 X-72.814 Y46.083 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-72.814 Y40.554 I.356 J-2.764 E.2471 G3 X-72.432 Y40.532 I.277 J1.438 E.01178 G3 X-72.774 Y46.087 I-.026 J2.787 E.27796 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.743 Y45.646 F30000 ;TYPE:Gap infill ;WIDTH:0.491075 G1 F12000 G1 X-72.45 Y45.667 E.01072 G1 X-72.129 Y45.644 E.01174 G1 X-71.843 Y45.587 E.01067 G1 X-71.552 Y45.488 E.01121 G1 X-71.264 Y45.344 E.01174 G1 X-71.021 Y45.182 E.01067 G1 X-70.791 Y44.979 E.01121 G1 X-70.58 Y44.737 E.01174 G1 X-70.418 Y44.493 E.01067 G1 X-70.282 Y44.218 E.01121 G1 X-70.183 Y43.927 E.01121 G1 X-70.126 Y43.641 E.01067 G1 X-70.103 Y43.32 E.01174 G1 X-70.126 Y42.999 E.01174 G1 X-70.183 Y42.713 E.01067 G1 X-70.282 Y42.422 E.01121 G1 X-70.418 Y42.147 E.01121 G1 X-70.58 Y41.903 E.01067 G1 X-70.791 Y41.661 E.01174 G1 X-71.021 Y41.458 E.01121 G1 X-71.264 Y41.296 E.01067 G1 X-71.552 Y41.152 E.01174 G1 X-71.857 Y41.05 E.01174 G1 X-72.144 Y40.993 E.01067 G1 X-72.447 Y40.973 E.01109 G1 X-72.771 Y40.996 E.01186 G1 X-73.057 Y41.053 E.01067 G1 X-73.348 Y41.152 E.01121 G1 X-73.623 Y41.288 E.01121 G1 X-73.867 Y41.45 E.01068 G1 X-74.109 Y41.661 E.01174 G1 X-74.312 Y41.891 E.01121 G1 X-74.474 Y42.134 E.01067 G1 X-74.618 Y42.422 E.01174 G1 X-74.72 Y42.727 E.01174 G1 X-74.777 Y43.014 E.01067 G1 X-74.797 Y43.32 E.01121 G1 X-74.777 Y43.626 E.01121 G1 X-74.72 Y43.913 E.01067 G1 X-74.618 Y44.218 E.01174 G1 X-74.474 Y44.506 E.01174 G1 X-74.312 Y44.749 E.01067 G1 X-74.109 Y44.979 E.01121 G1 X-73.879 Y45.182 E.01121 G1 X-73.636 Y45.344 E.01067 G1 X-73.348 Y45.488 E.01175 G1 X-73.057 Y45.587 E.0112 G1 X-72.782 Y45.642 E.01024 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.45 Y45.667 G1 X-72.129 Y45.644 G1 X-71.843 Y45.587 G1 X-71.552 Y45.488 G1 X-71.264 Y45.344 G1 X-71.021 Y45.182 G1 X-70.922 Y45.095 ;WIPE_END G1 X-63.29 Y45.089 Z7.6 F30000 G1 X-33.211 Y45.064 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-33.404 Y44.972 E.00657 G3 X-33.402 Y41.671 I.946 J-1.65 E.12284 G3 X-32.627 Y41.427 I.93 J1.604 E.02516 G3 X-33.176 Y45.084 I.17 J1.895 E.21152 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.404 Y44.972 G1 X-33.609 Y44.831 G1 X-33.797 Y44.667 G1 X-33.961 Y44.479 G1 X-34.099 Y44.272 G1 X-34.21 Y44.049 G1 X-34.29 Y43.813 G1 X-34.338 Y43.569 G1 X-34.338 Y43.566 ;WIPE_END G1 X-32.45 Y46.104 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-32.814 Y40.554 I-.008 J-2.786 E.25825 G3 X-32.432 Y40.532 I.277 J1.438 E.01178 G3 X-32.41 Y46.104 I-.026 J2.786 E.2667 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.441 Y45.666 F30000 ;TYPE:Gap infill ;WIDTH:0.491067 G1 F12000 G1 X-32.129 Y45.644 E.01141 G1 X-31.843 Y45.587 E.01067 G1 X-31.552 Y45.488 E.01121 G1 X-31.264 Y45.344 E.01174 G1 X-31.021 Y45.182 E.01067 G1 X-30.791 Y44.979 E.01121 G1 X-30.588 Y44.749 E.01121 G1 X-30.426 Y44.506 E.01067 G1 X-30.282 Y44.218 E.01174 G1 X-30.18 Y43.913 E.01174 G1 X-30.123 Y43.626 E.01067 G1 X-30.103 Y43.32 E.01121 G1 X-30.123 Y43.014 E.01121 G1 X-30.18 Y42.727 E.01067 G1 X-30.282 Y42.422 E.01174 G1 X-30.426 Y42.134 E.01174 G1 X-30.588 Y41.891 E.01067 G1 X-30.791 Y41.661 E.01121 G1 X-31.021 Y41.458 E.01121 G1 X-31.264 Y41.296 E.01067 G1 X-31.552 Y41.152 E.01175 G1 X-31.857 Y41.05 E.01174 G1 X-32.144 Y40.993 E.01067 G1 X-32.447 Y40.973 E.01109 G1 X-32.771 Y40.996 E.01186 G1 X-33.057 Y41.053 E.01067 G1 X-33.348 Y41.152 E.01121 G1 X-33.636 Y41.296 E.01174 G1 X-33.879 Y41.458 E.01067 G1 X-34.109 Y41.661 E.01121 G1 X-34.312 Y41.891 E.01121 G1 X-34.474 Y42.134 E.01067 G1 X-34.618 Y42.422 E.01174 G1 X-34.72 Y42.727 E.01174 G1 X-34.777 Y43.014 E.01067 G1 X-34.797 Y43.32 E.01121 G1 X-34.777 Y43.626 E.01121 G1 X-34.72 Y43.913 E.01067 G1 X-34.618 Y44.218 E.01174 G1 X-34.474 Y44.506 E.01174 G1 X-34.312 Y44.749 E.01067 G1 X-34.109 Y44.979 E.01121 G1 X-33.879 Y45.182 E.01121 G1 X-33.636 Y45.344 E.01067 G1 X-33.348 Y45.488 E.01175 G1 X-33.057 Y45.587 E.0112 G1 X-32.771 Y45.644 E.01067 G1 X-32.481 Y45.665 E.01061 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.129 Y45.644 G1 X-31.843 Y45.587 G1 X-31.552 Y45.488 G1 X-31.264 Y45.344 G1 X-31.021 Y45.182 G1 X-30.791 Y44.979 G1 X-30.706 Y44.883 ;WIPE_END G1 X-32.182 Y37.395 Z7.6 F30000 G1 X-40.713 Y-5.905 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.808 Y-5.732 E.00608 G3 X-43.402 Y-8.329 I-1.649 J-.947 E.21456 G3 X-42.627 Y-8.573 I.93 J1.604 E.02516 G3 X-40.699 Y-5.955 I.17 J1.894 E.11983 G1 X-40.702 Y-5.944 E.00035 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.808 Y-5.732 G1 X-40.939 Y-5.521 G1 X-41.103 Y-5.333 G1 X-41.291 Y-5.169 G1 X-41.498 Y-5.031 G1 X-41.721 Y-4.92 G1 X-41.957 Y-4.84 G1 X-42.201 Y-4.792 G1 X-42.221 Y-4.79 ;WIPE_END G1 X-44.421 Y-8.653 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-44.15 Y-8.896 E.01117 G3 X-42.814 Y-9.446 I1.692 J2.214 E.04491 G3 X-42.432 Y-9.468 I.277 J1.438 E.01178 G3 X-44.45 Y-8.63 I-.026 J2.786 E.46894 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.114 Y-8.335 F30000 ;TYPE:Gap infill ;WIDTH:0.491069 G1 F12000 G1 X-44.312 Y-8.109 E.01098 G1 X-44.474 Y-7.866 E.01067 G1 X-44.618 Y-7.578 E.01175 G1 X-44.717 Y-7.287 E.0112 G1 X-44.774 Y-7.001 E.01067 G1 X-44.797 Y-6.68 E.01174 G1 X-44.777 Y-6.374 E.01121 G1 X-44.72 Y-6.087 E.01067 G1 X-44.618 Y-5.782 E.01174 G1 X-44.482 Y-5.507 E.01121 G1 X-44.32 Y-5.263 E.01067 G1 X-44.109 Y-5.021 E.01174 G1 X-43.867 Y-4.81 E.01174 G1 X-43.623 Y-4.648 E.01067 G1 X-43.348 Y-4.512 E.01121 G1 X-43.057 Y-4.413 E.01121 G1 X-42.771 Y-4.356 E.01067 G1 X-42.45 Y-4.333 E.01174 G1 X-42.129 Y-4.356 E.01174 G1 X-41.843 Y-4.413 E.01067 G1 X-41.552 Y-4.512 E.01121 G1 X-41.277 Y-4.648 E.01121 G1 X-41.033 Y-4.81 E.01067 G1 X-40.791 Y-5.021 E.01174 G1 X-40.588 Y-5.251 E.01121 G1 X-40.426 Y-5.494 E.01067 G1 X-40.282 Y-5.782 E.01174 G1 X-40.183 Y-6.073 E.01121 G1 X-40.126 Y-6.359 E.01067 G1 X-40.103 Y-6.68 E.01174 G1 X-40.126 Y-7.001 E.01174 G1 X-40.183 Y-7.287 E.01067 G1 X-40.282 Y-7.578 E.01121 G1 X-40.426 Y-7.866 E.01174 G1 X-40.588 Y-8.109 E.01067 G1 X-40.791 Y-8.339 E.01121 G1 X-41.021 Y-8.542 E.01121 G1 X-41.264 Y-8.704 E.01067 G1 X-41.552 Y-8.848 E.01175 G1 X-41.857 Y-8.95 E.01174 G1 X-42.144 Y-9.007 E.01067 G1 X-42.447 Y-9.027 E.01109 G1 X-42.771 Y-9.004 E.01186 G1 X-43.057 Y-8.947 E.01067 G1 X-43.348 Y-8.848 E.01121 G1 X-43.623 Y-8.712 E.01121 G1 X-43.867 Y-8.55 E.01067 G1 X-44.084 Y-8.362 E.01051 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.312 Y-8.109 G1 X-44.474 Y-7.866 G1 X-44.618 Y-7.578 G1 X-44.717 Y-7.287 G1 X-44.774 Y-7.001 G1 X-44.797 Y-6.68 G1 X-44.789 Y-6.555 ;WIPE_END G1 X-52.421 Y-6.491 Z7.6 F30000 G1 X-64.33 Y-6.39 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-64.343 Y-6.431 E.00131 G3 X-63.402 Y-8.329 I1.886 J-.248 E.06906 G3 X-62.627 Y-8.573 I.93 J1.604 E.02516 G3 X-64.295 Y-6.186 I.17 J1.894 E.26527 G1 X-64.323 Y-6.351 E.00515 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-64.343 Y-6.431 G1 X-64.355 Y-6.68 G1 X-64.338 Y-6.929 G1 X-64.29 Y-7.173 G1 X-64.21 Y-7.409 G1 X-64.099 Y-7.632 G1 X-63.961 Y-7.839 G1 X-63.797 Y-8.027 G1 X-63.666 Y-8.141 ;WIPE_END G1 X-62.087 Y-3.92 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-62.814 Y-9.446 I-.372 J-2.762 E.26951 G3 X-62.432 Y-9.468 I.277 J1.438 E.01178 G3 X-62.047 Y-3.925 I-.026 J2.787 E.25556 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.129 Y-4.356 F30000 ;TYPE:Gap infill ;WIDTH:0.491075 G1 F12000 G1 X-61.843 Y-4.413 E.01067 G1 X-61.552 Y-4.512 E.01121 G1 X-61.277 Y-4.648 E.01121 G1 X-61.033 Y-4.81 E.01067 G1 X-60.791 Y-5.021 E.01174 G1 X-60.588 Y-5.251 E.01121 G1 X-60.426 Y-5.494 E.01067 G1 X-60.282 Y-5.782 E.01174 G1 X-60.183 Y-6.073 E.01121 G1 X-60.126 Y-6.359 E.01067 G1 X-60.103 Y-6.68 E.01174 G1 X-60.126 Y-7.001 E.01174 G1 X-60.183 Y-7.287 E.01067 G1 X-60.282 Y-7.578 E.01121 G1 X-60.418 Y-7.853 E.01121 G1 X-60.58 Y-8.097 E.01067 G1 X-60.791 Y-8.339 E.01174 G1 X-61.021 Y-8.542 E.01121 G1 X-61.264 Y-8.704 E.01067 G1 X-61.552 Y-8.848 E.01175 G1 X-61.857 Y-8.95 E.01174 G1 X-62.144 Y-9.007 E.01067 G1 X-62.447 Y-9.027 E.01109 G1 X-62.771 Y-9.004 E.01186 G1 X-63.057 Y-8.947 E.01067 G1 X-63.348 Y-8.848 E.01121 G1 X-63.636 Y-8.704 E.01174 G1 X-63.879 Y-8.542 E.01067 G1 X-64.109 Y-8.339 E.01121 G1 X-64.312 Y-8.109 E.01121 G1 X-64.474 Y-7.866 E.01067 G1 X-64.618 Y-7.578 E.01174 G1 X-64.72 Y-7.273 E.01174 G1 X-64.777 Y-6.986 E.01067 G1 X-64.797 Y-6.68 E.01121 G1 X-64.777 Y-6.374 E.01121 G1 X-64.72 Y-6.087 E.01067 G1 X-64.618 Y-5.782 E.01174 G1 X-64.474 Y-5.494 E.01174 G1 X-64.312 Y-5.251 E.01067 G1 X-64.109 Y-5.021 E.01121 G1 X-63.867 Y-4.81 E.01174 G1 X-63.623 Y-4.648 E.01067 G1 X-63.348 Y-4.512 E.01121 G1 X-63.057 Y-4.413 E.01121 G1 X-62.771 Y-4.356 E.01067 G1 X-62.45 Y-4.333 E.01174 G1 X-62.169 Y-4.353 E.01028 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.843 Y-4.413 G1 X-61.552 Y-4.512 G1 X-61.277 Y-4.648 G1 X-61.033 Y-4.81 G1 X-60.791 Y-5.021 G1 X-60.588 Y-5.251 G1 X-60.514 Y-5.362 ;WIPE_END G1 X-53.808 Y-9.006 Z7.6 F30000 G1 X7.002 Y-42.052 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13827 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13827 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13827 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13827 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X11.692 Y-44.315 Z7.6 F30000 G1 X74.198 Y15.448 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13827 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13827 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13827 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F13827 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13827 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13827 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13827 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F13827 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X70.963 Y14.873 Z7.6 F30000 G1 X56.76 Y38.79 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 X57.024 Y38.421 F30000 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z7.6 F30000 G1 X33.602 Y39.152 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13827 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13827 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z7.6 F30000 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13827 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F13827 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z7.6 F30000 G1 X35.602 Y-10.448 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13827 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13827 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z7.6 F30000 G1 X3.498 Y40.648 Z7.6 G1 Z7.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13827 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13827 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:7.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z7.8 I-.151 J-1.208 P1 F30000 G1 X-33.299 Y45.241 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-33.502 Y45.142 E.00694 G3 X-33.255 Y41.378 I1.043 J-1.822 E.14403 G3 X-32.682 Y41.233 I.896 J2.339 E.01819 G3 X-33.255 Y45.263 I.223 J2.088 E.23464 G1 X-33.263 Y45.259 E.00028 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-33.502 Y45.142 G1 X-33.73 Y44.988 G1 X-33.937 Y44.807 G1 X-34.118 Y44.6 G1 X-34.271 Y44.371 G1 X-34.392 Y44.125 G1 X-34.481 Y43.864 G1 X-34.497 Y43.782 ;WIPE_END G1 X-32.45 Y46.104 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-32.435 Y40.531 I.008 J-2.786 E.26896 G1 X-32.086 Y40.554 E.01075 G3 X-32.41 Y46.104 I-.356 J2.763 E.257 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-32.432 Y45.765 F30000 ;TYPE:Gap infill ;WIDTH:0.293275 G1 F12000 G1 X-32.131 Y45.742 E.00616 G2 X-34.896 Y43.32 I-.319 J-2.425 E.22864 G1 X-34.874 Y43.647 E.00669 G2 X-32.472 Y45.763 I2.423 J-.33 E.07117 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-32.131 Y45.742 G1 X-31.825 Y45.684 G1 X-31.522 Y45.582 G1 X-31.227 Y45.438 G1 X-30.955 Y45.255 G1 X-30.72 Y45.05 G1 X-30.681 Y45.005 ;WIPE_END G1 X-38.314 Y45.046 Z7.8 F30000 G1 X-73.313 Y45.234 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-73.502 Y45.143 E.00647 G3 X-73.255 Y41.378 I1.044 J-1.822 E.14406 G3 X-72.682 Y41.233 I.896 J2.338 E.01819 G3 X-73.255 Y45.264 I.224 J2.088 E.23471 G1 X-73.277 Y45.252 E.00076 G1 X-72.813 Y46.079 F30000 G1 F12000 G3 X-72.435 Y40.531 I.371 J-2.762 E.25776 G1 X-72.086 Y40.554 E.01075 G3 X-72.774 Y46.084 I-.356 J2.763 E.2682 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-72.752 Y45.746 F30000 ;TYPE:Gap infill ;WIDTH:0.293302 G1 F12000 G1 X-72.442 Y45.766 E.00635 G2 X-74.896 Y43.312 I-.008 J-2.446 E.23481 G1 X-74.875 Y43.639 E.00669 G1 X-74.813 Y43.953 E.00653 G1 X-74.71 Y44.256 E.00653 G1 X-74.564 Y44.55 E.00669 G2 X-72.792 Y45.742 I2.114 J-1.23 E.04508 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-72.442 Y45.766 G1 X-72.131 Y45.745 G1 X-71.825 Y45.684 G1 X-71.514 Y45.58 G1 X-71.22 Y45.434 G1 X-70.961 Y45.26 G1 X-70.918 Y45.223 ;WIPE_END G1 X-69.979 Y37.648 Z7.8 F30000 G1 X-64.524 Y-6.352 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-64.541 Y-6.405 E.00171 G3 X-63.255 Y-8.622 I2.082 J-.274 E.08473 G3 X-62.682 Y-8.767 I.896 J2.339 E.01819 G3 X-64.487 Y-6.134 I.224 J2.088 E.29408 G1 X-64.517 Y-6.312 E.00555 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-64.541 Y-6.405 G1 X-64.553 Y-6.68 G1 X-64.535 Y-6.954 G1 X-64.481 Y-7.224 G1 X-64.392 Y-7.485 G1 X-64.271 Y-7.731 G1 X-64.118 Y-7.96 G1 X-63.951 Y-8.151 ;WIPE_END G1 X-62.086 Y-3.915 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G3 X-62.086 Y-9.446 I-.359 J-2.765 E.29132 G3 X-61.728 Y-3.986 I-.372 J2.766 E.2353 G3 X-62.046 Y-3.92 I-.717 J-2.695 E.00999 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-62.114 Y-4.258 F30000 ;TYPE:Gap infill ;WIDTH:0.293338 G1 F12000 G1 X-61.818 Y-4.32 E.00617 G2 X-64.896 Y-6.68 I-.633 J-2.362 E.22218 G1 X-64.874 Y-6.353 E.00669 G2 X-62.153 Y-4.255 I2.423 J-.33 E.0777 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-61.818 Y-4.32 G1 X-61.522 Y-4.418 G1 X-61.227 Y-4.562 G1 X-60.955 Y-4.745 G1 X-60.72 Y-4.95 G1 X-60.51 Y-5.191 G1 X-60.477 Y-5.24 ;WIPE_END G1 X-52.848 Y-5.461 Z7.8 F30000 G1 X-40.536 Y-5.817 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X-40.637 Y-5.633 E.00644 G3 X-43.255 Y-8.622 I-1.821 J-1.046 E.24535 G3 X-42.682 Y-8.767 I.896 J2.339 E.01819 G3 X-40.517 Y-5.879 I.224 J2.088 E.13346 G1 X-40.524 Y-5.855 E.00078 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-40.637 Y-5.633 G1 X-40.782 Y-5.4 G1 X-40.963 Y-5.193 G1 X-41.17 Y-5.012 G1 X-41.399 Y-4.859 G1 X-41.645 Y-4.738 G1 X-41.906 Y-4.649 G1 X-42.005 Y-4.629 ;WIPE_END G1 X-44.421 Y-8.654 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F12000 G1 X-44.132 Y-8.897 E.01161 G3 X-42.435 Y-9.469 I1.69 J2.215 E.05603 G1 X-42.086 Y-9.446 E.01075 G3 X-44.441 Y-8.624 I-.356 J2.763 E.45839 SET_VELOCITY_LIMIT ACCEL=10000 G1 X-44.187 Y-8.401 F30000 ;TYPE:Gap infill ;WIDTH:0.293159 G1 F12000 G1 X-44.392 Y-8.17 E.00631 G2 X-44.896 Y-6.68 I1.942 J1.487 E.03266 G1 X-44.874 Y-6.353 E.00669 G2 X-44.161 Y-8.431 I2.423 J-.33 E.26688 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X-44.392 Y-8.17 G1 X-44.56 Y-7.915 G1 X-44.71 Y-7.615 G1 X-44.813 Y-7.313 G1 X-44.874 Y-7.007 G1 X-44.896 Y-6.68 G1 X-44.892 Y-6.628 ;WIPE_END G1 X-38.589 Y-10.931 Z7.8 F30000 G1 X7.002 Y-42.052 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13904 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13904 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13904 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13904 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X11.693 Y-44.296 Z7.8 F30000 G1 X74.198 Y15.448 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13904 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13904 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13904 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F13904 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13904 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13904 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13904 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F13904 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X70.97 Y14.881 Z7.8 F30000 G1 X56.76 Y38.79 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X53.34 Y38.79 E.10509 G1 X53.34 Y39.19 E.01229 G1 X52.26 Y39.19 E.03319 G1 X52.26 Y38.01 E.03626 G1 X57.84 Y38.01 E.17146 G1 X57.84 Y39.19 E.03626 G1 X56.76 Y39.19 E.03319 G1 X56.76 Y38.83 E.01106 SET_VELOCITY_LIMIT ACCEL=10000 G1 X57.024 Y38.421 F30000 ;TYPE:Gap infill ;WIDTH:0.388205 G1 F12000 G1 X56.978 Y38.4 E.00143 G1 X53.123 Y38.4 E.10847 ;WIDTH:0.409407 G1 X53.076 Y38.421 E.00152 ;WIDTH:0.452372 G1 X53.03 Y38.443 E.00169 ;WIDTH:0.495337 G1 X52.984 Y38.464 E.00187 ;WIDTH:0.538302 G1 X52.938 Y38.486 E.00205 ;WIDTH:0.581267 G1 X52.892 Y38.507 E.00223 ;WIDTH:0.624233 G1 X52.846 Y38.529 E.00241 ;WIDTH:0.683425 G1 F11948.481 G1 X52.8 Y38.55 E.00265 G2 X52.8 Y38.973 I12.289 J.222 E.02203 G1 E-.8 F1800 ;WIPE_START G1 F11948.481 G1 X52.8 Y38.55 G1 X52.846 Y38.529 ;WIPE_END G1 X57.024 Y38.421 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 ;WIDTH:0.452374 G1 F12000 G1 X57.07 Y38.443 E.00169 ;WIDTH:0.495338 G1 X57.116 Y38.464 E.00187 ;WIDTH:0.538303 G1 X57.162 Y38.486 E.00205 ;WIDTH:0.581268 G1 X57.208 Y38.507 E.00223 ;WIDTH:0.624233 G1 X57.254 Y38.529 E.00241 ;WIDTH:0.667198 G1 X57.3 Y38.55 E.00258 ;WIDTH:0.687941 G1 F11864.825 G3 X57.3 Y38.973 I-12.289 J.222 E.02219 G1 E-.8 F1800 ;WIPE_START G1 F11864.825 G1 X57.3 Y38.55 ;WIPE_END G1 X49.67 Y38.744 Z7.8 F30000 G1 X33.602 Y39.152 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13904 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13904 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z7.8 F30000 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F13904 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F13904 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z7.8 F30000 G1 X35.602 Y-10.448 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13904 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13904 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z7.8 F30000 G1 X3.498 Y40.648 Z7.8 G1 Z7.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F13904 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F13904 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:7.6 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.952 E.04962 G1 X76.598 Y13.952 E.08279 G1 X76.598 Y15.448 E.04962 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.545 E.14297 G1 X77.005 Y13.545 E.1098 G1 X77.005 Y15.855 E.07663 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.11 E.15917 G1 X77.44 Y13.11 E.12844 G1 X77.44 Y16.29 E.09771 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z8 F30000 G1 Z7.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7606 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X74.494 Y14.344 E.0526 G1 X74.494 Y15.056 E.02187 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.384 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y14.7 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y14.7 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y14.7 ;WIPE_END G1 X76.598 Y9.048 Z8 F30000 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y9.048 E.08279 G1 X74.102 Y7.552 E.04962 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.008 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X73.695 Y9.455 E.1098 G1 X73.695 Y7.145 E.07663 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.415 E.0753 G1 X77.44 Y9.89 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X73.26 Y9.89 E.12844 G1 X73.26 Y6.71 E.09771 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.85 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.869 ;WIPE_END G1 X76.206 Y8.656 Z8 F30000 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X76.206 Y7.944 E.02187 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.656 E.02187 G1 X76.166 Y8.656 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y8.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y8.3 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y8.3 ;WIPE_END G1 X68.721 Y3.751 Z8 F30000 G1 X7.002 Y-42.052 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-43.548 E.04962 G1 X7.298 Y-43.548 E.00981 G1 X7.298 Y-42.052 E.04962 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-43.955 E.07663 G1 X7.705 Y-43.955 E.03682 G1 X7.705 Y-41.645 E.07663 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-44.39 E.09771 G1 X8.14 Y-44.39 E.06084 G1 X8.14 Y-41.21 E.09771 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.452 Z8 F30000 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-49.948 E.04962 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.452 E.04962 G1 X7.042 Y-48.452 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.045 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-50.355 E.07663 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.045 E.07663 G1 X6.635 Y-48.045 E.03549 G1 X6.16 Y-47.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-50.79 E.09771 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.61 E.09771 G1 X6.2 Y-47.61 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.61 ;WIPE_END G1 X8.428 Y-42.318 Z8 F30000 G1 X33.602 Y39.152 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z8 F30000 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7606 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z8 F30000 G1 X35.602 Y-10.448 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z8 F30000 G1 X3.498 Y40.648 Z8 G1 Z7.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:7.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;7.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;7.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.2 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z8.2 F30000 G1 X7.002 Y-42.052 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z8.2 F30000 G1 X33.602 Y39.152 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z8.2 F30000 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z8.2 F30000 G1 X35.602 Y-10.448 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z8.2 F30000 G1 X3.498 Y40.648 Z8.2 G1 Z7.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 M73 P38 R66 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.4 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 M73 P39 R66 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z8.4 F30000 G1 Z8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z8.4 F30000 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z8.4 F30000 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z8.4 F30000 G1 X7.002 Y-42.052 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z8.4 F30000 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z8.4 F30000 G1 X33.602 Y39.152 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z8.4 F30000 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z8.4 F30000 G1 X35.602 Y-10.448 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z8.4 F30000 G1 X3.498 Y40.648 Z8.4 G1 Z8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:8.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.6 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z8.6 F30000 G1 X7.002 Y-42.052 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z8.6 F30000 G1 X33.602 Y39.152 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z8.6 F30000 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z8.6 F30000 G1 X35.602 Y-10.448 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z8.6 F30000 G1 X3.498 Y40.648 Z8.6 G1 Z8.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:8.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z8.8 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z8.8 F30000 G1 X7.002 Y-42.052 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z8.8 F30000 G1 X33.602 Y39.152 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z8.8 F30000 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z8.8 F30000 G1 X35.602 Y-10.448 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z8.8 F30000 G1 X3.498 Y40.648 Z8.8 G1 Z8.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:8.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;8.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.952 E.04962 G1 X76.598 Y13.952 E.08279 G1 X76.598 Y15.448 E.04962 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.545 E.14297 G1 X77.005 Y13.545 E.1098 G1 X77.005 Y15.855 E.07663 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.11 E.15917 G1 X77.44 Y13.11 E.12844 G1 X77.44 Y16.29 E.09771 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z9 F30000 G1 Z8.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7606 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X74.494 Y14.344 E.0526 G1 X74.494 Y15.056 E.02187 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.384 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y14.7 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y14.7 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y14.7 ;WIPE_END G1 X76.598 Y9.048 Z9 F30000 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y9.048 E.08279 G1 X74.102 Y7.552 E.04962 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.008 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X73.695 Y9.455 E.1098 G1 X73.695 Y7.145 E.07663 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.415 E.0753 G1 X77.44 Y9.89 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X73.26 Y9.89 E.12844 G1 X73.26 Y6.71 E.09771 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.85 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.869 ;WIPE_END G1 X76.206 Y8.656 Z9 F30000 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X76.206 Y7.944 E.02187 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.656 E.02187 G1 X76.166 Y8.656 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y8.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y8.3 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y8.3 ;WIPE_END G1 X68.721 Y3.751 Z9 F30000 G1 X7.002 Y-42.052 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-43.548 E.04962 G1 X7.298 Y-43.548 E.00981 G1 X7.298 Y-42.052 E.04962 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-43.955 E.07663 G1 X7.705 Y-43.955 E.03682 G1 X7.705 Y-41.645 E.07663 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-44.39 E.09771 G1 X8.14 Y-44.39 E.06084 G1 X8.14 Y-41.21 E.09771 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.452 Z9 F30000 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-49.948 E.04961 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.452 E.04961 G1 X7.042 Y-48.452 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.045 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-50.355 E.07662 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.045 E.07662 G1 X6.635 Y-48.045 E.03549 G1 X6.16 Y-47.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-50.79 E.09771 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.61 E.0977 G1 X6.2 Y-47.61 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.61 ;WIPE_END G1 X8.428 Y-42.318 Z9 F30000 G1 X33.602 Y39.152 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z9 F30000 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7606 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z9 F30000 G1 X35.602 Y-10.448 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z9 F30000 G1 X3.498 Y40.648 Z9 G1 Z8.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:8.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;8.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;8.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.2 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z9.2 F30000 G1 X7.002 Y-42.052 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z9.2 F30000 G1 X33.602 Y39.152 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z9.2 F30000 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z9.2 F30000 G1 X35.602 Y-10.448 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z9.2 F30000 G1 X3.498 Y40.648 Z9.2 G1 Z8.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:9 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;9 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.4 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z9.4 F30000 G1 Z9 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z9.4 F30000 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z9.4 F30000 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z9.4 F30000 G1 X7.002 Y-42.052 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z9.4 F30000 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z9.4 F30000 G1 X33.602 Y39.152 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z9.4 F30000 G1 Z9 M73 P39 R65 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z9.4 F30000 G1 X35.602 Y-10.448 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z9.4 F30000 G1 X3.498 Y40.648 Z9.4 G1 Z9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:9.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.6 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z9.6 F30000 G1 X7.002 Y-42.052 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z9.6 F30000 G1 X33.602 Y39.152 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 M73 P40 R65 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z9.6 F30000 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z9.6 F30000 G1 X35.602 Y-10.448 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z9.6 F30000 G1 X3.498 Y40.648 Z9.6 G1 Z9.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:9.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z9.8 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z9.8 F30000 G1 X7.002 Y-42.052 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z9.8 F30000 G1 X33.602 Y39.152 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z9.8 F30000 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z9.8 F30000 G1 X35.602 Y-10.448 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z9.8 F30000 G1 X3.498 Y40.648 Z9.8 G1 Z9.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:9.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;9.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.952 E.04962 G1 X76.598 Y13.952 E.08279 G1 X76.598 Y15.448 E.04962 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.545 E.14297 G1 X77.005 Y13.545 E.1098 G1 X77.005 Y15.855 E.07663 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.11 E.15917 G1 X77.44 Y13.11 E.12844 G1 X77.44 Y16.29 E.09771 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z10 F30000 G1 Z9.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7606 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X74.494 Y14.344 E.0526 G1 X74.494 Y15.056 E.02187 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.384 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y14.7 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y14.7 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y14.7 ;WIPE_END G1 X76.598 Y9.048 Z10 F30000 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y9.048 E.08279 G1 X74.102 Y7.552 E.04962 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.008 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X73.695 Y9.455 E.1098 G1 X73.695 Y7.145 E.07663 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.415 E.0753 G1 X77.44 Y9.89 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X73.26 Y9.89 E.12844 G1 X73.26 Y6.71 E.09771 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.85 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.869 ;WIPE_END G1 X76.206 Y8.656 Z10 F30000 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X76.206 Y7.944 E.02187 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.656 E.02187 G1 X76.166 Y8.656 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y8.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y8.3 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y8.3 ;WIPE_END G1 X68.721 Y3.751 Z10 F30000 G1 X7.002 Y-42.052 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-43.548 E.04962 G1 X7.298 Y-43.548 E.00981 G1 X7.298 Y-42.052 E.04962 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-43.955 E.07663 G1 X7.705 Y-43.955 E.03682 G1 X7.705 Y-41.645 E.07663 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-44.39 E.09771 G1 X8.14 Y-44.39 E.06084 G1 X8.14 Y-41.21 E.09771 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.452 Z10 F30000 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-49.948 E.04962 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.452 E.04962 G1 X7.042 Y-48.452 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.045 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-50.355 E.07663 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.045 E.07663 G1 X6.635 Y-48.045 E.03549 G1 X6.16 Y-47.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-50.79 E.09771 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.61 E.09771 G1 X6.2 Y-47.61 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.61 ;WIPE_END G1 X8.428 Y-42.318 Z10 F30000 G1 X33.602 Y39.152 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z10 F30000 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7606 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z10 F30000 G1 X35.602 Y-10.448 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z10 F30000 G1 X3.498 Y40.648 Z10 G1 Z9.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:9.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;9.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;9.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.2 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z10.2 F30000 G1 X7.002 Y-42.052 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z10.2 F30000 G1 X33.602 Y39.152 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z10.2 F30000 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z10.2 F30000 G1 X35.602 Y-10.448 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z10.2 F30000 G1 X3.498 Y40.648 Z10.2 G1 Z9.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:10 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;10 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.4 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z10.4 F30000 G1 Z10 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z10.4 F30000 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z10.4 F30000 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z10.4 F30000 G1 X7.002 Y-42.052 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z10.4 F30000 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z10.4 F30000 G1 X33.602 Y39.152 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z10.4 F30000 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z10.4 F30000 G1 X35.602 Y-10.448 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z10.4 F30000 G1 X3.498 Y40.648 Z10.4 G1 Z10 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:10.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.6 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z10.6 F30000 G1 X7.002 Y-42.052 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 M73 P40 R64 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z10.6 F30000 G1 X33.602 Y39.152 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z10.6 F30000 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z10.6 F30000 G1 X35.602 Y-10.448 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z10.6 F30000 G1 X3.498 Y40.648 Z10.6 G1 Z10.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:10.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z10.8 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z10.8 F30000 G1 X7.002 Y-42.052 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z10.8 F30000 G1 X33.602 Y39.152 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z10.8 F30000 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z10.8 F30000 G1 X35.602 Y-10.448 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z10.8 F30000 G1 X3.498 Y40.648 Z10.8 G1 Z10.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 M73 P41 R64 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:10.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;10.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.952 E.04962 G1 X76.598 Y13.952 E.08279 G1 X76.598 Y15.448 E.04962 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.545 E.14297 G1 X77.005 Y13.545 E.1098 G1 X77.005 Y15.855 E.07663 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.11 E.15917 G1 X77.44 Y13.11 E.12844 G1 X77.44 Y16.29 E.09771 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z11 F30000 G1 Z10.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7606 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X74.494 Y14.344 E.0526 G1 X74.494 Y15.056 E.02187 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.384 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y14.7 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y14.7 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y14.7 ;WIPE_END G1 X76.598 Y9.048 Z11 F30000 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y9.048 E.08279 G1 X74.102 Y7.552 E.04962 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.008 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X73.695 Y9.455 E.1098 G1 X73.695 Y7.145 E.07663 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.415 E.0753 G1 X77.44 Y9.89 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X73.26 Y9.89 E.12844 G1 X73.26 Y6.71 E.09771 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.85 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.869 ;WIPE_END G1 X76.206 Y8.656 Z11 F30000 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X76.206 Y7.944 E.02187 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.656 E.02187 G1 X76.166 Y8.656 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y8.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y8.3 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y8.3 ;WIPE_END G1 X68.721 Y3.751 Z11 F30000 G1 X7.002 Y-42.052 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-43.548 E.04962 G1 X7.298 Y-43.548 E.00981 G1 X7.298 Y-42.052 E.04962 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-43.955 E.07663 G1 X7.705 Y-43.955 E.03682 G1 X7.705 Y-41.645 E.07663 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-44.39 E.09771 G1 X8.14 Y-44.39 E.06084 G1 X8.14 Y-41.21 E.09771 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.452 Z11 F30000 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-49.948 E.04962 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.452 E.04962 G1 X7.042 Y-48.452 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.045 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-50.355 E.07663 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.045 E.07663 G1 X6.635 Y-48.045 E.03549 G1 X6.16 Y-47.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-50.79 E.09771 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.61 E.09771 G1 X6.2 Y-47.61 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.61 ;WIPE_END G1 X8.428 Y-42.318 Z11 F30000 G1 X33.602 Y39.152 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z11 F30000 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7606 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z11 F30000 G1 X35.602 Y-10.448 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z11 F30000 G1 X3.498 Y40.648 Z11 G1 Z10.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:10.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;10.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;10.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.2 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z11.2 F30000 G1 X7.002 Y-42.052 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z11.2 F30000 G1 X33.602 Y39.152 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z11.2 F30000 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z11.2 F30000 G1 X35.602 Y-10.448 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z11.2 F30000 G1 X3.498 Y40.648 Z11.2 G1 Z10.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:11 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;11 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.4 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z11.4 F30000 G1 Z11 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z11.4 F30000 G1 X7.002 Y-42.052 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z11.4 F30000 G1 X33.602 Y39.152 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z11.4 F30000 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z11.4 F30000 G1 X35.602 Y-10.448 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z11.4 F30000 G1 X3.498 Y40.648 Z11.4 G1 Z11 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:11.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.6 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7612 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F7612 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F7612 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z11.6 F30000 G1 X7.002 Y-42.052 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X8.429 Y-42.298 Z11.6 F30000 G1 X33.602 Y39.152 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z11.6 F30000 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7612 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7612 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z11.6 F30000 G1 X35.602 Y-10.448 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z11.6 F30000 G1 X3.498 Y40.648 Z11.6 G1 Z11.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7612 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7612 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7612 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:11.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z11.8 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7618 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F7618 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 M73 P41 R63 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F7618 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z11.8 F30000 G1 X7.002 Y-42.052 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X8.429 Y-42.278 Z11.8 F30000 G1 X33.602 Y39.152 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z11.8 F30000 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7618 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7618 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z11.8 F30000 G1 X35.602 Y-10.448 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z11.8 F30000 G1 X3.498 Y40.648 Z11.8 G1 Z11.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7618 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7618 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7618 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:11.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;11.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.952 E.04962 G1 X76.598 Y13.952 E.08279 G1 X76.598 Y15.448 E.04962 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.545 E.14297 G1 X77.005 Y13.545 E.1098 G1 X77.005 Y15.855 E.07663 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.11 E.15917 G1 X77.44 Y13.11 E.12844 G1 X77.44 Y16.29 E.09771 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z12 F30000 G1 Z11.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7606 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X74.494 Y14.344 E.0526 G1 X74.494 Y15.056 E.02187 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.384 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y14.7 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y14.7 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y14.7 ;WIPE_END G1 X76.598 Y9.048 Z12 F30000 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X74.102 Y9.048 E.08279 G1 X74.102 Y7.552 E.04962 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.008 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X73.695 Y9.455 E.1098 G1 X73.695 Y7.145 E.07663 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.415 E.0753 G1 X77.44 Y9.89 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X73.26 Y9.89 E.12844 G1 X73.26 Y6.71 E.09771 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.85 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.869 ;WIPE_END G1 X76.206 Y8.656 Z12 F30000 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X76.206 Y7.944 E.02187 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.656 E.02187 G1 X76.166 Y8.656 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y8.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F7606 G1 X75.81 Y8.3 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y8.3 ;WIPE_END G1 X68.721 Y3.751 Z12 F30000 G1 X7.002 Y-42.052 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-43.548 E.04962 G1 X7.298 Y-43.548 E.00981 G1 X7.298 Y-42.052 E.04962 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-43.955 E.07663 G1 X7.705 Y-43.955 E.03682 G1 X7.705 Y-41.645 E.07663 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-44.39 E.09771 G1 X8.14 Y-44.39 E.06084 G1 X8.14 Y-41.21 E.09771 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.452 Z12 F30000 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X7.002 Y-49.948 E.04962 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.452 E.04962 G1 X7.042 Y-48.452 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.045 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.595 Y-50.355 E.07663 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.045 E.07663 G1 X6.635 Y-48.045 E.03549 G1 X6.16 Y-47.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X6.16 Y-50.79 E.09771 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.61 E.09771 G1 X6.2 Y-47.61 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.61 ;WIPE_END G1 X8.428 Y-42.318 Z12 F30000 G1 X33.602 Y39.152 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z12 F30000 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7606 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7606 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z12 F30000 G1 X35.602 Y-10.448 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X28.947 Y-3.478 Z12 F30000 G1 X3.498 Y40.648 Z12 G1 Z11.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7606 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.608 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7606 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y40.705 E1.70006 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7606 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y40.27 E1.54804 ;LAYER_CHANGE ;Z:11.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;11.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;11.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.2 I.418 J1.143 P1 F30000 G1 X74.198 Y15.448 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6358 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F6358 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F6358 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z12.2 F30000 G1 X7.002 Y-42.052 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 M73 P42 R63 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X5.949 Y-41.941 Z12.2 F30000 G1 X3.498 Y40.648 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z12.2 F30000 G1 X33.602 Y39.152 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z12.2 F30000 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6358 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z12.2 F30000 G1 X35.602 Y-10.448 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z12.2 F30000 G1 X5.205 Y-10.545 Z12.2 G1 Z11.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:12 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;12 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.4 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z12.4 F30000 G1 Z12 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6352 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F6352 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F6352 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z12.4 F30000 G1 X7.002 Y-42.052 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X5.949 Y-41.961 Z12.4 F30000 G1 X3.498 Y40.648 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z12.4 F30000 G1 X33.602 Y39.152 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z12.4 F30000 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6352 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z12.4 F30000 G1 X35.602 Y-10.448 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z12.4 F30000 G1 X5.205 Y-10.545 Z12.4 G1 Z12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:12.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.6 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6352 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F6352 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F6352 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z12.6 F30000 G1 X7.002 Y-42.052 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X5.949 Y-41.961 Z12.6 F30000 G1 X3.498 Y40.648 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z12.6 F30000 G1 X33.602 Y39.152 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z12.6 F30000 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6352 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z12.6 F30000 G1 X35.602 Y-10.448 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z12.6 F30000 G1 X5.205 Y-10.545 Z12.6 G1 Z12.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:12.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z12.8 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6358 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F6358 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F6358 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z12.8 F30000 G1 X7.002 Y-42.052 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X5.949 Y-41.941 Z12.8 F30000 G1 X3.498 Y40.648 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z12.8 F30000 G1 X33.602 Y39.152 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z12.8 F30000 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6358 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z12.8 F30000 G1 X35.602 Y-10.448 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z12.8 F30000 G1 X5.205 Y-10.545 Z12.8 G1 Z12.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:12.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;12.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.952 E.04962 G1 X76.598 Y13.952 E.08279 G1 X76.598 Y15.448 E.04962 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6346 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.545 E.14297 G1 X77.005 Y13.545 E.1098 G1 X77.005 Y15.855 E.07663 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.11 E.15917 M73 P42 R62 G1 X77.44 Y13.11 E.12844 G1 X77.44 Y16.29 E.09771 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z13 F30000 G1 Z12.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6346 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6346 G1 X74.494 Y14.344 E.0526 G1 X74.494 Y15.056 E.02187 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.384 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y14.7 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F6346 G1 X75.81 Y14.7 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y14.7 ;WIPE_END G1 X76.598 Y9.048 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X74.102 Y9.048 E.08279 G1 X74.102 Y7.552 E.04962 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.008 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6346 G1 X73.695 Y9.455 E.1098 G1 X73.695 Y7.145 E.07663 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.415 E.0753 G1 X77.44 Y9.89 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X73.26 Y9.89 E.12844 G1 X73.26 Y6.71 E.09771 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.85 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.869 ;WIPE_END G1 X76.206 Y8.656 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6346 G1 X76.206 Y7.944 E.02187 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.656 E.02187 G1 X76.166 Y8.656 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.85 Y8.3 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377528 G1 F6346 G1 X75.81 Y8.3 E.02618 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.85 Y8.3 ;WIPE_END G1 X68.721 Y3.751 Z13 F30000 G1 X7.002 Y-42.052 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X7.002 Y-43.548 E.04962 G1 X7.298 Y-43.548 E.00981 G1 X7.298 Y-42.052 E.04962 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6346 G1 X6.595 Y-43.955 E.07663 G1 X7.705 Y-43.955 E.03682 G1 X7.705 Y-41.645 E.07663 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X6.16 Y-44.39 E.09771 G1 X8.14 Y-44.39 E.06084 G1 X8.14 Y-41.21 E.09771 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.452 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X7.002 Y-49.948 E.04962 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.452 E.04962 G1 X7.042 Y-48.452 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.045 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6346 G1 X6.595 Y-50.355 E.07663 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.045 E.07663 G1 X6.635 Y-48.045 E.03549 G1 X6.16 Y-47.61 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X6.16 Y-50.79 E.09771 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.61 E.09771 G1 X6.2 Y-47.61 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.61 ;WIPE_END G1 X5.949 Y-41.981 Z13 F30000 G1 X3.498 Y40.648 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6346 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z13 F30000 G1 X33.602 Y39.152 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6346 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z13 F30000 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6346 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6346 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z13 F30000 G1 X35.602 Y-10.448 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6346 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z13 F30000 G1 X5.205 Y-10.545 Z13 G1 Z12.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6346 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6346 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:12.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;12.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;12.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.2 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.912 E.05094 G1 X76.598 Y13.912 E.08279 G1 X76.598 Y15.448 E.05094 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.505 E.14429 G1 X77.005 Y13.505 E.1098 G1 X77.005 Y15.855 E.07795 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.07 E.16039 G1 X77.44 Y13.07 E.12844 G1 X77.44 Y16.29 E.09893 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6358 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.304 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X74.494 Y14.304 E.0526 G1 X74.494 Y15.056 E.02309 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.344 E.02186 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y14.68 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.417308 G1 F6358 G1 X75.79 Y14.68 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y14.68 ;WIPE_END G1 X76.598 Y9.088 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X74.102 Y9.088 E.08279 G1 X74.102 Y7.552 E.05094 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.048 E.04961 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.495 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X73.695 Y9.495 E.1098 G1 X73.695 Y7.145 E.07795 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.455 E.07662 G1 X77.44 Y9.93 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X73.26 Y9.93 E.12844 G1 X73.26 Y6.71 E.09893 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.89 E.09771 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.909 ;WIPE_END G1 X76.206 Y8.696 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X76.206 Y7.944 E.02309 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.696 E.02309 G1 X76.166 Y8.696 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.87 Y8.32 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41731 G1 F6358 G1 X75.79 Y8.32 E.02807 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.87 Y8.32 ;WIPE_END G1 X68.741 Y3.771 Z13.2 F30000 G1 X7.002 Y-42.052 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X7.002 Y-43.588 E.05094 G1 X7.298 Y-43.588 E.00981 G1 X7.298 Y-42.052 E.05094 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.595 Y-43.995 E.07795 G1 X7.705 Y-43.995 E.03682 G1 X7.705 Y-41.645 E.07795 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X6.16 Y-44.43 E.09893 G1 X8.14 Y-44.43 E.06084 G1 X8.14 Y-41.21 E.09893 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.412 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X7.002 Y-49.948 E.05094 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.412 E.05094 G1 X7.042 Y-48.412 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.005 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.595 Y-50.355 E.07795 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.005 E.07795 G1 X6.635 Y-48.005 E.03549 G1 X6.16 Y-47.57 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X6.16 Y-50.79 E.09893 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.57 E.09893 G1 X6.2 Y-47.57 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.57 ;WIPE_END G1 X5.949 Y-41.941 Z13.2 F30000 G1 X3.498 Y40.648 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z13.2 F30000 G1 X33.602 Y39.152 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z13.2 F30000 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6358 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6358 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z13.2 F30000 G1 X35.602 Y-10.448 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6358 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z13.2 F30000 G1 X5.205 Y-10.545 Z13.2 G1 Z12.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6358 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6358 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:13 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;13 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.4 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z13.4 F30000 G1 Z13 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6352 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F6352 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z13.4 F30000 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z13.4 F30000 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F6352 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z13.4 F30000 G1 X7.002 Y-42.052 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z13.4 F30000 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X5.949 Y-41.961 Z13.4 F30000 G1 X3.498 Y40.648 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z13.4 F30000 G1 X33.602 Y39.152 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 M73 P43 R62 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z13.4 F30000 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6352 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z13.4 F30000 G1 X35.602 Y-10.448 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z13.4 F30000 G1 X5.205 Y-10.545 Z13.4 G1 Z13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:13.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.6 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.932 E.05028 G1 X76.598 Y13.932 E.08279 G1 X76.598 Y15.448 E.05028 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.525 E.14363 G1 X77.005 Y13.525 E.1098 G1 X77.005 Y15.855 E.07729 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.09 E.15978 G1 X77.44 Y13.09 E.12844 G1 X77.44 Y16.29 E.09832 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6352 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.324 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X74.494 Y14.324 E.0526 G1 X74.494 Y15.056 E.02248 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.364 E.02125 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y14.69 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397418 G1 F6352 G1 X75.8 Y14.69 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y14.69 ;WIPE_END G1 X76.598 Y9.068 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X74.102 Y9.068 E.08279 G1 X74.102 Y7.552 E.05028 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.028 E.04895 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.475 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X73.695 Y9.475 E.1098 G1 X73.695 Y7.145 E.07729 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.435 E.07596 G1 X77.44 Y9.91 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X73.26 Y9.91 E.12844 G1 X73.26 Y6.71 E.09832 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.87 E.09709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.889 ;WIPE_END G1 X76.206 Y8.676 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X76.206 Y7.944 E.02248 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.676 E.02248 G1 X76.166 Y8.676 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.86 Y8.31 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.39742 G1 F6352 G1 X75.8 Y8.31 E.02716 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.86 Y8.31 ;WIPE_END G1 X68.731 Y3.761 Z13.6 F30000 G1 X7.002 Y-42.052 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-43.568 E.05028 G1 X7.298 Y-43.568 E.00981 G1 X7.298 Y-42.052 E.05028 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-43.975 E.07729 G1 X7.705 Y-43.975 E.03682 G1 X7.705 Y-41.645 E.07729 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-44.41 E.09832 G1 X8.14 Y-44.41 E.06084 G1 X8.14 Y-41.21 E.09832 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.432 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X7.002 Y-49.948 E.05028 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.432 E.05028 G1 X7.042 Y-48.432 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-48.025 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.595 Y-50.355 E.07729 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-48.025 E.07729 G1 X6.635 Y-48.025 E.03549 G1 X6.16 Y-47.59 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X6.16 Y-50.79 E.09832 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.59 E.09832 G1 X6.2 Y-47.59 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.59 ;WIPE_END G1 X5.949 Y-41.961 Z13.6 F30000 G1 X3.498 Y40.648 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z13.6 F30000 G1 X33.602 Y39.152 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z13.6 F30000 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6352 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6352 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z13.6 F30000 G1 X35.602 Y-10.448 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6352 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z13.6 F30000 G1 X5.205 Y-10.545 Z13.6 G1 Z13.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6352 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6352 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:13.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z13.8 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.892 E.0516 G1 X76.598 Y13.892 E.08279 G1 X76.598 Y15.448 E.0516 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6365 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.485 E.14495 G1 X77.005 Y13.485 E.1098 G1 X77.005 Y15.855 E.07861 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.05 E.161 G1 X77.44 Y13.05 E.12844 G1 X77.44 Y16.29 E.09955 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6365 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.284 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6365 G1 X74.494 Y14.284 E.0526 G1 X74.494 Y15.056 E.0237 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.324 E.02247 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.88 Y14.67 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4372 G1 F6365 G1 X75.78 Y14.67 E.02893 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.88 Y14.67 ;WIPE_END G1 X76.598 Y9.108 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X74.102 Y9.108 E.08279 G1 X74.102 Y7.552 E.0516 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.068 E.05027 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.515 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6365 G1 X73.695 Y9.515 E.1098 G1 X73.695 Y7.145 E.07861 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.475 E.07728 G1 X77.44 Y9.95 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X73.26 Y9.95 E.12844 G1 X73.26 Y6.71 E.09955 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.91 E.09832 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.929 ;WIPE_END G1 X76.206 Y8.716 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6365 G1 X76.206 Y7.944 E.0237 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.716 E.0237 G1 X76.166 Y8.716 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.88 Y8.33 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4372 G1 F6365 G1 X75.78 Y8.33 E.02893 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.88 Y8.33 ;WIPE_END G1 X68.751 Y3.781 Z13.8 F30000 G1 X7.002 Y-42.052 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X7.002 Y-43.608 E.0516 G1 X7.298 Y-43.608 E.00981 G1 X7.298 Y-42.052 E.0516 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6365 G1 X6.595 Y-44.015 E.07861 G1 X7.705 Y-44.015 E.03682 G1 X7.705 Y-41.645 E.07861 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X6.16 Y-44.45 E.09955 G1 X8.14 Y-44.45 E.06084 G1 X8.14 Y-41.21 E.09955 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-43.21 ;WIPE_END G1 X7.002 Y-48.392 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X7.002 Y-49.948 E.0516 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.392 E.0516 G1 X7.042 Y-48.392 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.985 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6365 G1 X6.595 Y-50.355 E.07861 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.985 E.07861 G1 X6.635 Y-47.985 E.03549 G1 X6.16 Y-47.55 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X6.16 Y-50.79 E.09955 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.55 E.09955 G1 X6.2 Y-47.55 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.175 Y-49.55 ;WIPE_END G1 X5.949 Y-41.921 Z13.8 F30000 G1 X3.498 Y40.648 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6365 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z13.8 F30000 G1 X33.602 Y39.152 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6365 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z13.8 F30000 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6365 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6365 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z13.8 F30000 G1 X35.602 Y-10.448 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6365 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z13.8 F30000 G1 X5.205 Y-10.545 Z13.8 G1 Z13.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6365 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6365 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:13.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;13.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.853 E.05292 G1 X76.598 Y13.853 E.08279 G1 X76.598 Y15.448 E.05292 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6377 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.446 E.14627 G1 X77.005 Y13.446 E.1098 G1 X77.005 Y15.855 E.07993 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y13.011 E.16222 G1 X77.44 Y13.011 E.12844 G1 X77.44 Y16.29 E.10077 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z14 F30000 G1 Z13.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6377 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.245 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6377 G1 X74.494 Y14.245 E.0526 G1 X74.494 Y15.056 E.02492 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.285 E.0237 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.9 Y14.65 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.476982 G1 F6377 G1 X75.76 Y14.65 E.03044 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.9 Y14.65 ;WIPE_END G1 X76.598 Y9.147 Z14 F30000 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X74.102 Y9.147 E.08279 G1 X74.102 Y7.552 E.05292 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.107 E.05159 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.554 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6377 G1 X73.695 Y9.554 E.1098 G1 X73.695 Y7.145 E.07993 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.514 E.0786 G1 X77.44 Y9.989 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X73.26 Y9.989 E.12844 G1 X73.26 Y6.71 E.10077 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y9.949 E.09954 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y9.969 ;WIPE_END G1 X76.206 Y8.755 Z14 F30000 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6377 G1 X76.206 Y7.944 E.02492 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.755 E.02492 G1 X76.166 Y8.755 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.9 Y8.35 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.476984 G1 F6377 G1 X75.76 Y8.35 E.03044 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.9 Y8.35 ;WIPE_END G1 X68.771 Y3.8 Z14 F30000 G1 X7.002 Y-42.052 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X7.002 Y-43.647 E.05292 G1 X7.298 Y-43.647 E.00981 G1 X7.298 Y-42.052 E.05292 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6377 G1 X6.595 Y-44.054 E.07993 G1 X7.705 Y-44.054 E.03682 G1 X7.705 Y-41.645 E.07993 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X6.16 Y-44.489 E.10077 G1 X8.14 Y-44.489 E.06084 G1 X8.14 Y-41.21 E.10077 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.176 Y-43.21 ;WIPE_END G1 X7.002 Y-48.353 Z14 F30000 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X7.002 Y-49.948 E.05292 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.353 E.05292 G1 X7.042 Y-48.353 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.946 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6377 G1 X6.595 Y-50.355 E.07993 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.946 E.07993 G1 X6.635 Y-47.946 E.03549 G1 X6.16 Y-47.511 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X6.16 Y-50.79 E.10077 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-47.511 E.10077 G1 X6.2 Y-47.511 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.176 Y-49.51 ;WIPE_END G1 X5.949 Y-41.881 Z14 F30000 G1 X3.498 Y40.648 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6377 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z14 F30000 G1 X33.602 Y39.152 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6377 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z14 F30000 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6377 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6377 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z14 F30000 G1 X35.602 Y-10.448 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6377 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z14 F30000 G1 X5.205 Y-10.545 Z14 G1 Z13.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6377 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6377 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:13.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;13.8 G1 E-.8 F1800 M73 P43 R61 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;13.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.2 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.736 E.0568 G1 X76.598 Y13.736 E.08279 G1 X76.598 Y15.448 E.0568 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6433 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.329 E.15015 G1 X77.005 Y13.329 E.1098 G1 X77.005 Y15.855 E.0838 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X75.04 Y16.833 E.01668 G1 X75.04 Y17.66 E.02541 G1 X75.04 Y18.29 E.01936 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y17.66 E.01936 G1 X73.26 Y13.641 E.12349 G1 X73.26 Y12.894 E.02295 G1 X74.007 Y12.894 E.02295 G1 X76.693 Y12.894 E.08253 G1 X77.44 Y12.894 E.02295 G1 X77.44 Y13.641 E.02295 G1 X77.44 Y15.66 E.06204 G1 X77.44 Y16.29 E.01936 G1 X76.81 Y16.29 E.01936 G1 X75.65 Y16.29 E.03564 G1 X75.08 Y16.29 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6433 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y14.128 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6433 G1 X74.494 Y14.128 E.0526 G1 X74.494 Y15.056 E.02851 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.168 E.02729 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.958 Y14.592 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.593838 G1 F6433 G1 X75.702 Y14.592 E.03339 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13891.471 G1 X74.958 Y14.592 ;WIPE_END G1 X76.598 Y9.264 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X74.102 Y9.264 E.08279 G1 X74.102 Y7.552 E.0568 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.224 E.05547 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.671 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6433 G1 X73.695 Y9.671 E.1098 G1 X73.695 Y7.145 E.0838 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.631 E.08248 G1 X77.44 Y10.106 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X76.693 Y10.106 E.02295 G1 X74.007 Y10.106 E.08253 G1 X73.26 Y10.106 E.02295 G1 X73.26 Y9.359 E.02295 G1 X73.26 Y7.34 E.06204 G1 X73.26 Y6.71 E.01936 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y7.34 E.01936 G1 X77.44 Y9.359 E.06204 G1 X77.44 Y10.066 E.02172 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y10.085 ;WIPE_END G1 X76.206 Y8.872 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6433 G1 X76.206 Y7.944 E.02851 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.872 E.02851 G1 X76.166 Y8.872 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.958 Y8.408 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.59384 G1 F6433 G1 X75.702 Y8.408 E.03339 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F13891.42 G1 X74.958 Y8.408 ;WIPE_END G1 X68.83 Y3.858 Z14.2 F30000 G1 X7.002 Y-42.052 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X7.002 Y-43.764 E.0568 G1 X7.298 Y-43.764 E.00981 G1 X7.298 Y-42.052 E.0568 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6433 G1 X6.595 Y-44.171 E.0838 G1 X7.705 Y-44.171 E.03682 G1 X7.705 Y-41.645 E.0838 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X6.16 Y-41.84 E.01936 G1 X6.16 Y-43.859 E.06204 G1 X6.16 Y-44.606 E.02295 G1 X8.14 Y-44.606 E.06084 G1 X8.14 Y-43.859 E.02295 G1 X8.14 Y-41.84 E.06204 G1 X8.14 Y-41.21 E.01936 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.176 Y-43.21 ;WIPE_END G1 X7.002 Y-48.236 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X7.002 Y-49.948 E.0568 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.236 E.0568 G1 X7.042 Y-48.236 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.829 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6433 G1 X6.595 Y-50.355 E.0838 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.829 E.0838 G1 X6.635 Y-47.829 E.03549 G1 X6.16 Y-47.394 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X6.16 Y-48.141 E.02295 G1 X6.16 Y-50.16 E.06204 G1 X6.16 Y-50.79 E.01936 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-50.16 E.01936 G1 X8.14 Y-48.141 E.06204 G1 X8.14 Y-47.394 E.02295 G1 X6.2 Y-47.394 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F10920 G1 X6.176 Y-49.394 ;WIPE_END G1 X5.949 Y-41.764 Z14.2 F30000 G1 X3.498 Y40.648 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6433 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z14.2 F30000 G1 X33.602 Y39.152 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6433 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z14.2 F30000 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6433 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6433 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z14.2 F30000 G1 X35.602 Y-10.448 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6433 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z14.2 F30000 G1 X5.205 Y-10.545 Z14.2 G1 Z13.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6433 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6433 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:14 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;14 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.4 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.602 E.06123 G1 X76.598 Y13.602 E.08279 G1 X76.598 Y15.448 E.06123 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6540 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y13.195 E.15458 G1 X77.005 Y13.195 E.1098 G1 X77.005 Y15.855 E.08824 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X75.04 Y16.833 E.01668 G1 X75.04 Y17.66 E.02541 G1 X75.04 Y18.29 E.01936 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y17.66 E.01936 G1 X73.26 Y13.524 E.12709 G1 X73.26 Y12.76 E.02348 G1 X74.024 Y12.76 E.02348 G1 X76.676 Y12.76 E.08149 G1 X77.44 Y12.76 E.02348 G1 X77.44 Y13.524 E.02348 G1 X77.44 Y15.66 E.06563 G1 X77.44 Y16.29 E.01936 G1 X76.81 Y16.29 E.01936 G1 X75.65 Y16.29 E.03564 G1 X75.08 Y16.29 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z14.4 F30000 G1 Z14 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6540 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y13.994 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6540 G1 X74.494 Y13.994 E.0526 G1 X74.494 Y15.056 E.03262 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y14.034 E.03139 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.846 Y14.354 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.385198 G1 F6540 G1 X74.854 Y14.354 E.02768 G1 X74.854 Y14.696 E.00955 G1 X75.846 Y14.696 E.02768 G1 X75.846 Y14.394 E.00843 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X75.846 Y14.696 G1 X74.854 Y14.696 G1 X74.854 Y14.354 G1 X75.217 Y14.354 ;WIPE_END G1 X76.598 Y9.398 Z14.4 F30000 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X74.102 Y9.398 E.08279 G1 X74.102 Y7.552 E.06123 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.358 E.0599 SET_VELOCITY_LIMIT ACCEL=10000 G1 X77.005 Y9.805 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6540 G1 X73.695 Y9.805 E.1098 G1 X73.695 Y7.145 E.08824 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y9.765 E.08691 G1 X77.44 Y10.24 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X76.676 Y10.24 E.02348 G1 X74.024 Y10.24 E.08149 G1 X73.26 Y10.24 E.02348 G1 X73.26 Y9.476 E.02348 G1 X73.26 Y7.34 E.06563 G1 X73.26 Y6.71 E.01936 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y7.34 E.01936 G1 X77.44 Y9.476 E.06563 G1 X77.44 Y10.2 E.02225 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.44 Y10.219 ;WIPE_END G1 X76.206 Y9.006 Z14.4 F30000 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6540 G1 X76.206 Y7.944 E.03262 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y9.006 E.03262 G1 X76.166 Y9.006 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.846 Y8.646 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.385198 G1 F6540 G1 X75.846 Y8.304 E.00955 G1 X74.854 Y8.304 E.02768 G1 X74.854 Y8.646 E.00955 G1 X75.806 Y8.646 E.02656 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.854 Y8.646 G1 X74.854 Y8.304 G1 X75.559 Y8.304 ;WIPE_END G1 X69.408 Y3.786 Z14.4 F30000 G1 X7.002 Y-42.052 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X7.002 Y-43.898 E.06123 G1 X7.298 Y-43.898 E.00981 G1 X7.298 Y-42.052 E.06123 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6540 G1 X6.595 Y-44.305 E.08824 G1 X7.705 Y-44.305 E.03682 G1 X7.705 Y-41.645 E.08824 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X6.16 Y-41.84 E.01936 G1 X6.16 Y-43.976 E.06563 G1 X6.16 Y-44.74 E.02348 G1 X8.14 Y-44.74 E.06084 G1 X8.14 Y-43.976 E.02348 G1 X8.14 Y-41.84 E.06563 G1 X8.14 Y-41.21 E.01936 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.177 Y-43.21 ;WIPE_END G1 X7.002 Y-48.102 Z14.4 F30000 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X7.002 Y-49.948 E.06123 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-48.102 E.06123 G1 X7.042 Y-48.102 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-47.695 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6540 G1 X6.595 Y-50.355 E.08824 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.695 E.08824 G1 X6.635 Y-47.695 E.03549 G1 X6.16 Y-47.26 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X6.16 Y-48.024 E.02348 G1 X6.16 Y-50.16 E.06563 G1 X6.16 Y-50.79 E.01936 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-50.16 E.01936 G1 X8.14 Y-48.024 E.06563 G1 X8.14 Y-47.26 E.02348 G1 X6.2 Y-47.26 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F9360 G1 X6.177 Y-49.26 ;WIPE_END G1 X5.95 Y-41.631 Z14.4 F30000 G1 X3.498 Y40.648 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6540 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z14.4 F30000 G1 X33.602 Y39.152 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6540 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z14.4 F30000 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6540 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6540 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z14.4 F30000 G1 X35.602 Y-10.448 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6540 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z14.4 F30000 G1 X5.205 Y-10.545 Z14.4 G1 Z14 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6540 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6540 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:14.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.6 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.377 E.06869 G1 X76.598 Y13.377 E.08279 G1 X76.598 Y15.448 E.06869 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7275 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y12.97 E.16204 G1 X77.005 Y12.97 E.1098 G1 X77.005 Y15.855 E.09569 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X75.04 Y16.833 E.01668 G1 X75.04 Y17.66 E.02541 G1 X75.04 Y18.29 E.01936 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y17.66 E.01936 G1 X73.26 Y13.39 E.13121 G1 F2220 G1 X73.26 Y12.535 E.02627 G1 X77.44 Y12.535 E.12844 M106 S255 G1 X77.44 Y13.39 E.02627 G1 F7275 G1 X77.44 Y15.66 E.06975 G1 X77.44 Y16.29 E.01936 G1 X76.81 Y16.29 E.01936 G1 X75.65 Y16.29 E.03564 G1 X75.08 Y16.29 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z14.6 F30000 G1 Z14.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F7275 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y13.769 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7275 G1 X74.494 Y13.769 E.0526 G1 X74.494 Y15.056 E.03953 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y13.809 E.0383 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.79 Y14.185 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.497599 G1 F7275 G1 X74.91 Y14.185 E.0326 G1 X74.91 Y14.64 E.01685 G1 X75.79 Y14.64 E.0326 G1 X75.79 Y14.225 E.01536 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X75.79 Y14.64 G1 X74.91 Y14.64 G1 X74.91 Y14.185 G1 X75.161 Y14.185 ;WIPE_END G17 G3 Z14.6 I1.202 J-.192 P1 F30000 G1 X74.102 Y7.552 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.623 E.06869 G1 X74.102 Y9.623 E.08279 G1 X74.102 Y7.592 E.06736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X73.695 Y7.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7275 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y10.03 E.09569 G1 X73.695 Y10.03 E.1098 G1 X73.695 Y7.185 E.09437 G1 X73.26 Y6.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y7.34 E.01936 G1 X77.44 Y9.61 E.06975 G1 F2220 G1 X77.44 Y10.465 E.02627 G1 X73.26 Y10.465 E.12844 M106 S255 G1 X73.26 Y9.61 E.02627 G1 F7275 G1 X73.26 Y7.38 E.06852 G1 X73.26 Y6.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.26 Y6.731 ;WIPE_END G1 X76.206 Y9.231 Z14.6 F30000 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7275 G1 X76.206 Y7.944 E.03953 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y9.231 E.03953 G1 X76.166 Y9.231 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.79 Y8.815 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.4976 G1 F7275 G1 X75.79 Y8.36 E.01685 G1 X74.91 Y8.36 E.0326 G1 X74.91 Y8.815 E.01685 G1 X75.75 Y8.815 E.03112 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.91 Y8.815 G1 X74.91 Y8.36 G1 X75.615 Y8.36 ;WIPE_END G1 X69.465 Y3.841 Z14.6 F30000 G1 X7.002 Y-42.052 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X7.002 Y-44.123 E.06869 G1 X7.298 Y-44.123 E.00981 G1 X7.298 Y-42.052 E.06869 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7275 G1 X6.595 Y-44.53 E.09569 G1 X7.705 Y-44.53 E.03682 G1 X7.705 Y-41.645 E.09569 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X6.16 Y-41.84 E.01936 G1 X6.16 Y-44.11 E.06975 G1 F2220 G1 X6.16 Y-44.965 E.02627 G1 X8.14 Y-44.965 E.06084 M106 S255 G1 X8.14 Y-44.11 E.02627 G1 F7275 G1 X8.14 Y-41.84 E.06975 G1 X8.14 Y-41.21 E.01936 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.179 Y-43.21 ;WIPE_END G17 G3 Z14.6 I1.208 J.148 P1 F30000 G1 X7.002 Y-49.948 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-47.877 E.06869 G1 X7.002 Y-47.877 E.00981 G1 X7.002 Y-49.908 E.06736 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-50.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7275 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.47 E.09569 G1 X6.595 Y-47.47 E.03682 G1 X6.595 Y-50.315 E.09437 G1 X6.16 Y-50.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-50.16 E.01936 G1 X8.14 Y-47.89 E.06975 G1 F2220 G1 X8.14 Y-47.035 E.02627 G1 X6.16 Y-47.035 E.06084 M106 S255 G1 X6.16 Y-47.89 E.02627 G1 F7275 G1 X6.16 Y-50.12 E.06852 G1 X6.16 Y-50.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.14 Y-50.79 G1 X8.14 Y-50.77 ;WIPE_END G17 G3 Z14.6 I-1.215 J-.062 P1 F30000 G1 X3.498 Y40.648 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7275 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z14.6 F30000 G1 X33.602 Y39.152 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7275 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z14.6 F30000 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7275 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7275 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z14.6 F30000 G1 X35.602 Y-10.448 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7275 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z14.6 F30000 G1 X5.205 Y-10.545 Z14.6 G1 Z14.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7275 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7275 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:14.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z14.8 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y13.055 E.07938 G1 X76.598 Y13.055 E.08279 G1 X76.598 Y15.448 E.07938 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8116 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y12.648 E.17273 G1 X77.005 Y12.648 E.1098 G1 X77.005 Y15.855 E.10639 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X75.04 Y16.833 E.01668 G1 X75.04 Y17.66 E.02541 G1 X75.04 Y18.29 E.01936 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y17.66 E.01936 G1 X73.26 Y13.165 E.13812 G1 F2400 G1 X73.26 Y12.325 E.02581 G1 F1140 G1 X73.26 Y12.213 E.00344 G1 X74.213 Y12.213 E.02928 G1 X76.487 Y12.213 E.06987 G1 X77.44 Y12.213 E.02928 G1 X77.44 Y12.325 E.00344 M106 S255 G1 F2400 G1 X77.44 Y13.165 E.02581 G1 F8116 G1 X77.44 Y15.66 E.07666 G1 X77.44 Y16.29 E.01936 G1 X76.81 Y16.29 E.01936 G1 X75.65 Y16.29 E.03564 G1 X75.08 Y16.29 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z14.8 F30000 G1 Z14.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8116 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y13.447 F30000 M73 P44 R61 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8116 G1 X74.494 Y13.447 E.0526 G1 X74.494 Y15.056 E.04944 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y13.487 E.04821 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y13.824 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8116 G1 X74.871 Y13.824 E.02942 G1 X74.871 Y14.679 E.02627 G1 X75.829 Y14.679 E.02942 G1 X75.829 Y13.864 E.02504 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X75.829 Y14.679 G1 X74.871 Y14.679 G1 X74.871 Y14.451 ;WIPE_END G17 G3 Z14.8 I1.209 J-.135 P1 F30000 G1 X74.102 Y7.552 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y9.945 E.07938 G1 X74.102 Y9.945 E.08279 G1 X74.102 Y7.592 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X73.695 Y7.145 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8116 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y10.352 E.10639 G1 X73.695 Y10.352 E.1098 G1 X73.695 Y7.185 E.10506 G1 X73.26 Y6.71 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y7.34 E.01936 G1 X77.44 Y9.835 E.07666 G1 F2400 G1 X77.44 Y10.675 E.02581 G1 F1140 G1 X77.44 Y10.787 E.00344 G1 X76.487 Y10.787 E.02928 G1 X74.213 Y10.787 E.06987 G1 X73.26 Y10.787 E.02928 G1 X73.26 Y10.675 E.00344 M106 S255 G1 F2400 G1 X73.26 Y9.835 E.02581 G1 F8116 G1 X73.26 Y7.38 E.07544 G1 X73.26 Y6.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.26 Y6.731 ;WIPE_END G1 X76.206 Y9.553 Z14.8 F30000 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8116 G1 X76.206 Y7.944 E.04944 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y9.553 E.04944 G1 X76.166 Y9.553 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y9.176 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8116 G1 X75.829 Y8.321 E.02627 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y9.176 E.02627 G1 X75.789 Y9.176 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.871 Y9.176 G1 X74.871 Y8.321 G1 X75.099 Y8.321 ;WIPE_END G1 X68.963 Y3.782 Z14.8 F30000 G1 X7.002 Y-42.052 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X7.002 Y-44.445 E.07938 G1 X7.298 Y-44.445 E.00981 G1 X7.298 Y-42.052 E.07938 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8116 G1 X6.595 Y-44.852 E.10639 G1 X7.705 Y-44.852 E.03682 G1 X7.705 Y-41.645 E.10639 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X6.16 Y-41.84 E.01936 G1 X6.16 Y-44.335 E.07666 G1 F2400 G1 X6.16 Y-45.175 E.02581 G1 F1140 G1 X6.16 Y-45.287 E.00344 G1 X8.14 Y-45.287 E.06084 G1 X8.14 Y-45.175 E.00344 M106 S255 G1 F2400 G1 X8.14 Y-44.335 E.02581 G1 F8116 G1 X8.14 Y-41.84 E.07666 G1 X8.14 Y-41.21 E.01936 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.18 Y-43.21 ;WIPE_END G17 G3 Z14.8 I1.208 J.147 P1 F30000 G1 X7.002 Y-49.948 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-47.555 E.07938 G1 X7.002 Y-47.555 E.00981 G1 X7.002 Y-49.908 E.07806 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-50.355 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8116 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-47.148 E.10639 G1 X6.595 Y-47.148 E.03682 G1 X6.595 Y-50.315 E.10506 G1 X6.16 Y-50.79 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-50.16 E.01936 G1 X8.14 Y-47.665 E.07666 G1 F2400 G1 X8.14 Y-46.825 E.02581 G1 F1140 G1 X8.14 Y-46.713 E.00344 G1 X6.16 Y-46.713 E.06084 G1 X6.16 Y-46.825 E.00344 M106 S255 G1 F2400 G1 X6.16 Y-47.665 E.02581 G1 F8116 G1 X6.16 Y-50.12 E.07544 G1 X6.16 Y-50.75 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.14 Y-50.79 G1 X8.14 Y-50.77 ;WIPE_END G17 G3 Z14.8 I-1.215 J-.062 P1 F30000 G1 X3.498 Y40.648 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8116 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z14.8 F30000 G1 X33.602 Y39.152 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8116 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z14.8 F30000 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8116 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8116 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z14.8 F30000 G1 X35.602 Y-10.448 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8116 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z14.8 F30000 G1 X5.205 Y-10.545 Z14.8 G1 Z14.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8116 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8116 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:14.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;14.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y12.903 E.08442 G1 F2400 G1 X74.102 Y12.003 E.02985 G1 F600 G1 X74.102 Y11.803 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X74.102 Y11.197 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X74.102 Y10.997 E.00663 M106 S255 G1 F2400 G1 X74.102 Y10.097 E.02985 G1 F18000 G1 X74.102 Y7.552 E.08442 G1 X76.598 Y7.552 E.0828 G1 X76.598 Y10.097 E.08442 G1 F2400 G1 X76.598 Y10.997 E.02985 G1 F600 G1 X76.598 Y11.197 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X76.598 Y11.803 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X76.598 Y12.003 E.00663 M106 S255 G1 F2400 G1 X76.598 Y12.903 E.02985 G1 F18000 G1 X76.598 Y15.448 E.08442 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y17.6 E.00846 G1 X73.695 Y12.903 E.15581 G1 F2400 G1 X73.695 Y12.003 E.02985 G1 F600 G1 X73.695 Y11.803 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X73.695 Y11.197 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X73.695 Y10.997 E.00663 M106 S255 G1 F2400 G1 X73.695 Y10.097 E.02985 G1 F18000 G1 X73.695 Y7.4 E.08946 G1 X73.695 Y7.145 E.00846 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y7.4 E.00846 G1 X77.005 Y10.097 E.08946 G1 F2400 G1 X77.005 Y10.997 E.02985 G1 F600 G1 X77.005 Y11.197 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X77.005 Y11.803 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X77.005 Y12.003 E.00663 M106 S255 G1 F2400 G1 X77.005 Y12.903 E.02985 G1 F18000 G1 X77.005 Y15.6 E.08946 G1 X77.005 Y15.855 E.00846 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y16.833 E.01668 G1 X75.04 Y17.66 E.02541 G1 X75.04 Y18.29 E.01936 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y17.66 E.01936 G1 X73.26 Y12.843 E.14801 G1 F2400 G1 X73.26 Y12.003 E.02581 G1 F600 G1 X73.26 Y11.803 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X73.26 Y11.197 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X73.26 Y10.997 E.00615 M106 S255 G1 F2400 G1 X73.26 Y10.157 E.02581 G1 F12000 G1 X73.26 Y7.34 E.08656 G1 X73.26 Y6.71 E.01936 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y7.34 E.01936 G1 X77.44 Y10.157 E.08656 G1 F2400 G1 X77.44 Y10.997 E.02581 G1 F600 G1 X77.44 Y11.197 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X77.44 Y11.803 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X77.44 Y12.003 E.00615 M106 S255 G1 F2400 G1 X77.44 Y12.843 E.02581 G1 F12000 G1 X77.44 Y15.66 E.08656 G1 X77.44 Y16.29 E.01936 G1 X76.81 Y16.29 E.01936 G1 X75.65 Y16.29 E.03564 G1 X75.08 Y16.29 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z15 F30000 G1 Z14.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X76.206 Y13.877 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X74.494 Y13.877 E.0526 G1 X74.494 Y15.056 E.03621 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y13.917 E.03498 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.817 Y14.266 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.443623 G1 F15000 G1 X74.883 Y14.266 E.03049 G1 X74.883 Y14.667 E.01308 G1 X75.817 Y14.667 E.03049 G1 X75.817 Y14.306 E.01178 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.278 Y13.67 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 G1 F1500 G1 X76.278 Y9.5 E.12814 G1 X75.901 Y9.5 E.01159 G1 X75.901 Y13.5 E.12293 G1 X75.524 Y13.5 E.01159 G1 X75.524 Y9.5 E.12293 G1 X75.147 Y9.5 E.01159 G1 X75.147 Y13.5 E.12293 G1 X74.77 Y13.5 E.01159 G1 X74.77 Y9.5 E.12293 G1 X74.393 Y9.5 E.01159 G1 X74.393 Y13.67 E.12814 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X74.393 Y11.67 ;WIPE_END G17 G3 Z15 I.991 J.706 P1 F30000 G1 X76.206 Y9.123 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 M106 S255 G1 X76.206 Y7.944 E.03621 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y9.123 E.03621 G1 X76.166 Y9.123 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.817 Y8.734 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.443624 G1 F15000 G1 X75.817 Y8.333 E.01308 G1 X74.883 Y8.333 E.03049 G1 X74.883 Y8.734 E.01308 G1 X75.777 Y8.734 E.02919 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.883 Y8.734 G1 X74.883 Y8.333 G1 X75.588 Y8.333 ;WIPE_END G1 X69.437 Y3.814 Z15 F30000 G1 X7.002 Y-42.052 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-44.597 E.08442 G1 F2400 G1 X7.002 Y-45.497 E.02985 G1 F600 G1 X7.002 Y-45.697 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X7.002 Y-46.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.002 Y-46.503 E.00663 M106 S255 G1 F2400 G1 X7.002 Y-47.403 E.02985 G1 F18000 G1 X7.002 Y-49.948 E.08442 G1 X7.298 Y-49.948 E.00982 G1 X7.298 Y-47.403 E.08442 G1 F2400 G1 X7.298 Y-46.503 E.02985 G1 F600 G1 X7.298 Y-46.303 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X7.298 Y-45.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.298 Y-45.497 E.00663 M106 S255 G1 F2400 G1 X7.298 Y-44.597 E.02985 G1 F18000 G1 X7.298 Y-42.052 E.08442 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-41.9 E.00846 G1 X6.595 Y-44.597 E.08946 G1 F2400 G1 X6.595 Y-45.497 E.02985 G1 F600 G1 X6.595 Y-45.697 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X6.595 Y-46.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X6.595 Y-46.503 E.00663 M106 S255 G1 F2400 G1 X6.595 Y-47.403 E.02985 G1 F18000 G1 X6.595 Y-50.1 E.08946 G1 X6.595 Y-50.355 E.00846 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-50.1 E.00846 G1 X7.705 Y-47.403 E.08946 G1 F2400 G1 X7.705 Y-46.503 E.02985 G1 F600 G1 X7.705 Y-46.303 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X7.705 Y-45.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.705 Y-45.497 E.00663 M106 S255 G1 F2400 G1 X7.705 Y-44.597 E.02985 G1 F18000 G1 X7.705 Y-41.9 E.08946 G1 X7.705 Y-41.645 E.00846 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-41.84 E.01936 G1 X6.16 Y-44.657 E.08656 G1 F2400 G1 X6.16 Y-45.497 E.02581 G1 F600 G1 X6.16 Y-45.697 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X6.16 Y-46.303 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X6.16 Y-46.503 E.00615 M106 S255 G1 F2400 G1 X6.16 Y-47.343 E.02581 G1 F12000 G1 X6.16 Y-50.16 E.08656 G1 X6.16 Y-50.79 E.01936 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-50.16 E.01936 G1 X8.14 Y-47.343 E.08656 G1 F2400 G1 X8.14 Y-46.503 E.02581 G1 F600 G1 X8.14 Y-46.303 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.14 Y-45.697 E.0201 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X8.14 Y-45.497 E.00615 M106 S255 G1 F2400 G1 X8.14 Y-44.657 E.02581 G1 F12000 G1 X8.14 Y-41.84 E.08656 G1 X8.14 Y-41.21 E.01936 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.182 Y-43.21 ;WIPE_END G1 X5.938 Y-35.581 Z15 F30000 G1 X3.498 Y40.648 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z15 F30000 G1 X33.602 Y39.152 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z15 F30000 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z15 F30000 G1 X35.602 Y-10.448 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z15 F30000 G1 X5.205 Y-10.545 Z15 G1 Z14.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:14.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;14.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;14.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.2 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z15.2 F30000 G1 Z14.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6619 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6619 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6619 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6619 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z15.2 F30000 G1 X7.002 Y-42.052 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z15.2 F30000 G1 X3.498 Y40.648 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 M73 P44 R60 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z15.2 F30000 G1 X33.602 Y39.152 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z15.2 F30000 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6619 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6619 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z15.2 F30000 G1 X35.602 Y-10.448 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z15.2 F30000 G1 X5.205 Y-10.545 Z15.2 G1 Z14.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:15 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;15 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.4 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z15.4 F30000 G1 Z15 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6619 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6619 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6619 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6619 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z15.4 F30000 G1 X7.002 Y-42.052 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z15.4 F30000 G1 X3.498 Y40.648 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z15.4 F30000 G1 X33.602 Y39.152 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z15.4 F30000 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6619 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6619 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z15.4 F30000 G1 X35.602 Y-10.448 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z15.4 F30000 G1 X5.205 Y-10.545 Z15.4 G1 Z15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:15.2 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.6 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z15.6 F30000 G1 Z15.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6619 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6619 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6619 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6619 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z15.6 F30000 G1 X7.002 Y-42.052 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z15.6 F30000 G1 X3.498 Y40.648 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z15.6 F30000 G1 X33.602 Y39.152 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z15.6 F30000 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6619 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6619 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z15.6 F30000 G1 X35.602 Y-10.448 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z15.6 F30000 G1 X5.205 Y-10.545 Z15.6 G1 Z15.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:15.4 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z15.8 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z15.8 F30000 G1 Z15.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6619 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6619 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6619 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6619 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z15.8 F30000 G1 X7.002 Y-42.052 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z15.8 F30000 G1 X3.498 Y40.648 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z15.8 F30000 G1 X33.602 Y39.152 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z15.8 F30000 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6619 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6619 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z15.8 F30000 G1 X35.602 Y-10.448 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6619 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z15.8 F30000 G1 X5.205 Y-10.545 Z15.8 G1 Z15.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6619 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6619 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:15.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;15.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6748 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6748 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6748 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z16 F30000 G1 Z15.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F6748 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X75.35 Y14.2 Z16 F30000 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6748 G1 X75.35 Y11.065 E.14826 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.546 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6748 G1 X74.871 Y10.548 E.02942 G1 X74.871 Y14.679 E.12694 G1 X75.829 Y14.679 E.02942 G1 X75.829 Y10.586 E.12576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.168 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6748 G1 X74.494 Y10.171 E.0526 G1 X74.494 Y15.056 E.15009 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y10.208 E.14896 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.758 Y9.964 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.425025 G1 F6748 G1 X76.572 Y9.15 E.03584 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y8.61 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6748 G1 X75.217 Y9.964 E.05963 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.677 Y9.964 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6748 G1 X76.572 Y8.07 E.08343 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.522 Y7.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6748 G1 X74.137 Y9.964 E.10505 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y9.432 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6748 G1 X75.982 Y7.578 E.08162 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.442 Y7.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6748 G1 X74.128 Y8.892 E.05782 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y8.351 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6748 G1 X74.901 Y7.578 E.03403 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.128 Y8.351 ;WIPE_END G1 X68.025 Y3.768 Z16 F30000 G1 X7.002 Y-42.052 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6748 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6748 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6748 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z16 F30000 G1 X3.498 Y40.648 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6748 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6748 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6748 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z16 F30000 G1 X33.602 Y39.152 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6748 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 M73 P45 R60 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6748 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6748 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z16 F30000 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6748 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6748 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z16 F30000 G1 X35.602 Y-10.448 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6748 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6748 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6748 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z16 F30000 G1 X5.205 Y-10.545 Z16 G1 Z15.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6748 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6748 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:15.8 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;15.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;15.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.2 I-.469 J1.123 P1 F30000 G1 X75.04 Y17.711 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X75.04 Y18.29 E.01778 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y17.711 E.01778 G1 X75 Y17.711 E.05347 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.823 Y18.001 F30000 ;TYPE:Gap infill ;WIDTH:0.186552 G1 F6425 G1 X73.478 Y18.001 E.01574 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.823 Y18.001 ;WIPE_END G1 X76.308 Y10.514 Z16.2 F30000 G1 X76.598 Y9.053 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6425 G1 X76.598 Y15.448 E.21212 G1 X74.102 Y15.448 E.08279 G1 X74.102 Y9.053 E.21212 G1 X76.558 Y9.053 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y8.646 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X77.005 Y8.646 E.00365 G1 X77.005 Y15.855 E.23912 G1 X74.605 Y15.855 E.07961 G1 X74.605 Y16.354 E.01654 G1 X73.695 Y16.354 E.03019 G1 X73.695 Y8.646 E.25566 G1 X76.855 Y8.646 E.10482 G1 X76.46 Y8.211 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6425 G1 X76.46 Y7.289 E.02835 G1 X73.26 Y7.289 E.09833 G1 X73.26 Y6.71 E.01778 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.04 Y16.29 E.07375 G1 X75.04 Y16.789 E.01532 G1 X73.26 Y16.789 E.05469 G1 X73.26 Y8.211 E.26356 G1 X76.42 Y8.211 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y8.429 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6425 G1 X76.95 Y6.928 E.06668 G1 X77.223 Y7.272 F30000 ;WIDTH:0.306246 G1 F6425 G1 X77.041 Y7.181 E.00436 ;WIDTH:0.258368 G1 X76.859 Y7.09 E.00357 ;WIDTH:0.18941 G1 X76.678 Y6.999 E.00242 G1 X73.478 Y6.999 E.0382 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.478 Y6.999 ;WIPE_END G1 X74.313 Y9.92 Z16.2 F30000 G1 Z15.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6425 G1 X74.313 Y9.264 E.02173 G1 X75.286 Y9.264 E.03229 G1 X75.152 Y9.74 E.01638 G1 X75.249 Y10.395 E.02197 G2 X76.28 Y11.705 I11.219 J-7.76 E.05532 G3 X76.368 Y13.015 I-3.705 J.907 E.04378 G3 X75.338 Y14.326 I-11.219 J-7.759 E.05532 G1 X75.152 Y14.981 E.02259 G1 X75.19 Y15.237 E.00859 G1 X74.313 Y15.237 E.02908 G1 X74.313 Y14.485 E.02493 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y15.237 G1 X75.19 Y15.237 G1 X75.152 Y14.981 G1 X75.182 Y14.872 ;WIPE_END G1 X69.324 Y9.981 Z16.2 F30000 G1 X7.002 Y-42.052 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6425 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6425 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z16.2 F30000 G1 X3.498 Y40.648 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6425 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6425 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z16.2 F30000 G1 X33.602 Y39.152 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6425 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6425 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z16.2 F30000 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6425 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6425 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z16.2 F30000 G1 X35.602 Y-10.448 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6425 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6425 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z16.2 F30000 G1 X5.205 Y-10.545 Z16.2 G1 Z15.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6425 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6425 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:16 ;HEIGHT:0.2 ;BEFORE_LAYER_CHANGE ;16 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;16 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.4 I-.475 J1.12 P1 F30000 G1 X75.061 Y18.176 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;WIDTH:0.37852 G1 F6453 G1 X75.061 Y18.311 E.00368 G1 X73.239 Y18.311 E.04981 G1 X73.239 Y18.176 E.00368 G1 X75.021 Y18.176 E.04872 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.061 Y18.311 G1 X73.239 Y18.311 G1 X73.239 Y18.273 ;WIPE_END G1 X75.979 Y11.149 Z16.4 F30000 G1 X76.598 Y9.539 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6453 G1 X76.598 Y15.448 E.19601 G1 X74.102 Y15.448 E.08279 G1 X74.102 Y9.539 E.19601 G1 X76.558 Y9.539 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.132 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6453 G1 X77.005 Y9.132 E.00365 G1 X77.005 Y15.855 E.22302 G1 X73.695 Y15.868 E.1098 G1 X73.695 Y9.132 E.22345 G1 X76.855 Y9.132 E.10482 G1 X76.46 Y8.697 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6453 G1 X76.46 Y6.803 E.0582 G1 X73.26 Y6.803 E.09833 G1 X73.26 Y6.71 E.00286 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X73.26 Y16.303 E.12844 G1 X73.26 Y8.697 E.23371 G1 X76.42 Y8.697 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y8.914 F30000 ;TYPE:Gap infill ;WIDTH:0.587924 G1 F6453 G1 X76.95 Y6.928 E.08824 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6453 G1 X75.35 Y10.827 E.15954 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6453 G1 X75.829 Y10.308 E.13429 G1 X74.871 Y10.308 E.02942 G1 X74.871 Y14.679 E.13429 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6453 G1 X76.206 Y9.931 E.15747 G1 X74.494 Y9.931 E.0526 G1 X74.494 Y15.056 E.15747 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z16.4 F30000 G1 X7.002 Y-42.052 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6453 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6453 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6453 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z16.4 F30000 G1 X3.498 Y40.648 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6453 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6453 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6453 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z16.4 F30000 G1 X33.602 Y39.152 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6453 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6453 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6453 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z16.4 F30000 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6453 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6453 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z16.4 F30000 G1 X35.602 Y-10.448 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6453 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6453 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 M73 P45 R59 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6453 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z16.4 F30000 G1 X5.205 Y-10.545 Z16.4 G1 Z16 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6453 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6453 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:16.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;16.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.6 I-.346 J1.167 P1 F30000 G1 X76.598 Y9.793 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6174 G1 X76.598 Y15.207 E.17958 G1 X74.102 Y15.207 E.08279 G1 X74.102 Y9.793 E.17958 G1 X76.558 Y9.793 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.386 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6174 G1 X77.005 Y9.386 E.00365 G1 X77.005 Y15.614 E.20659 G1 X73.695 Y15.614 E.1098 G1 X73.695 Y9.386 E.20659 G1 X76.855 Y9.386 E.10482 G1 X76.46 Y8.951 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6174 G1 X76.46 Y6.71 E.06886 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y16.049 E.00741 G1 X73.26 Y16.049 E.09833 G1 X73.26 Y8.951 E.2181 G1 X76.42 Y8.951 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.169 F30000 ;TYPE:Gap infill ;WIDTH:0.587924 G1 F6174 G1 X76.95 Y6.928 E.09953 G1 X75.35 Y13.959 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6174 G1 X75.35 Y11.081 E.13612 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.562 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6174 G1 X74.871 Y10.562 E.02942 G1 X74.871 Y14.438 E.11908 G1 X75.829 Y14.438 E.02942 G1 X75.829 Y10.602 E.11785 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.185 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6174 G1 X74.494 Y10.185 E.0526 G1 X74.494 Y14.815 E.14225 G1 X76.206 Y14.815 E.0526 G1 X76.206 Y10.225 E.14102 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.678 Y15.952 F30000 ;TYPE:Gap infill ;WIDTH:0.283982 G1 F6174 G1 X77.223 Y15.952 E.01071 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X76.678 Y15.952 ;WIPE_END G1 X70.812 Y11.069 Z16.6 F30000 G1 X7.002 Y-42.052 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6174 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6174 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6174 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z16.6 F30000 G1 X3.498 Y40.648 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6174 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6174 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6174 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z16.6 F30000 G1 X33.602 Y39.152 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6174 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6174 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6174 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z16.6 F30000 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6174 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6174 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z16.6 F30000 G1 X35.602 Y-10.448 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6174 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6174 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6174 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z16.6 F30000 G1 X5.205 Y-10.545 Z16.6 G1 Z16.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6174 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6174 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:16.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;16.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z16.8 I-.348 J1.166 P1 F30000 G1 X76.598 Y9.927 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6123 G1 X76.598 Y15.073 E.17072 G1 X74.102 Y15.073 E.08279 G1 X74.102 Y9.927 E.17072 G1 X76.558 Y9.927 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.52 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6123 G1 X77.005 Y9.52 E.00365 G1 X77.005 Y15.48 E.19772 G1 X73.695 Y15.48 E.1098 G1 X73.695 Y9.52 E.19772 G1 X76.855 Y9.52 E.10482 G1 X76.46 Y9.085 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6123 G1 X76.46 Y6.71 E.07297 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.915 E.01151 G1 X73.26 Y15.915 E.09833 G1 X73.26 Y9.085 E.20988 G1 X76.42 Y9.085 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.302 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6123 G1 X76.95 Y6.928 E.10546 G1 X75.35 Y13.825 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6123 G1 X75.35 Y11.215 E.12348 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.696 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6123 G1 X74.871 Y10.696 E.02942 G1 X74.871 Y14.304 E.11087 G1 X75.829 Y14.304 E.02942 G1 X75.829 Y10.736 E.10964 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.319 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6123 G1 X74.494 Y10.319 E.0526 G1 X74.494 Y14.681 E.13404 G1 X76.206 Y14.681 E.0526 G1 X76.206 Y10.359 E.13281 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.359 ;WIPE_END G1 X70.206 Y7.641 Z16.8 F30000 G1 X7.002 Y-42.052 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6123 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6123 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6123 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z16.8 F30000 G1 X3.498 Y40.648 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6123 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6123 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6123 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z16.8 F30000 G1 X33.602 Y39.152 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6123 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6123 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6123 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z16.8 F30000 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6123 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6123 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z16.8 F30000 G1 X35.602 Y-10.448 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6123 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6123 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6123 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z16.8 F30000 G1 X5.205 Y-10.545 Z16.8 G1 Z16.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6123 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6123 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:16.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;16.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17 I-.35 J1.165 P1 F30000 G1 X76.598 Y10.053 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X76.598 Y14.947 E.16237 G1 X74.102 Y14.947 E.08279 G1 X74.102 Y10.053 E.16237 G1 X76.558 Y10.053 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.646 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X77.005 Y9.646 E.00365 G1 X77.005 Y15.354 E.18938 G1 X73.695 Y15.354 E.1098 G1 X73.695 Y9.646 E.18938 G1 X76.855 Y9.646 E.10482 G1 X76.46 Y9.211 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X76.46 Y6.71 E.07683 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.789 E.01538 G1 X73.26 Y15.789 E.09833 G1 X73.26 Y9.211 E.20215 G1 X76.42 Y9.211 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.428 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6097 G1 X76.95 Y6.928 E.11105 G1 X75.35 Y13.699 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6097 G1 X75.35 Y11.341 E.11157 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.822 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6097 G1 X74.871 Y10.822 E.02942 G1 X74.871 Y14.178 E.10313 G1 X75.829 Y14.178 E.02942 G1 X75.829 Y10.862 E.1019 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.445 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6097 G1 X74.494 Y10.445 E.0526 G1 X74.494 Y14.555 E.12631 G1 X76.206 Y14.555 E.0526 G1 X76.206 Y10.485 E.12508 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.485 ;WIPE_END G1 X70.211 Y7.761 Z17 F30000 G1 X7.002 Y-42.052 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z17 F30000 G1 X3.498 Y40.648 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z17 F30000 G1 X33.602 Y39.152 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z17 F30000 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6097 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6097 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z17 F30000 G1 X35.602 Y-10.448 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z17 F30000 G1 X5.205 Y-10.545 Z17 G1 Z16.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:16.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;16.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;16.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.2 I-.351 J1.165 P1 F30000 G1 X76.598 Y10.092 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X76.598 Y14.908 E.15973 G1 X74.102 Y14.908 E.08279 G1 X74.102 Y10.092 E.15973 G1 X76.558 Y10.092 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.685 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X77.005 Y9.685 E.00365 G1 X77.005 Y15.315 E.18674 G1 X73.695 Y15.315 E.1098 G1 X73.695 Y9.685 E.18674 G1 X76.855 Y9.685 E.10482 G1 X76.46 Y9.25 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X76.46 Y6.71 E.07806 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.75 E.0166 G1 X73.26 Y15.75 E.09833 G1 X73.26 Y9.25 E.19971 G1 X76.42 Y9.25 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.468 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6089 G1 X76.95 Y6.928 E.11282 G1 X75.35 Y13.66 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6089 G1 X75.35 Y11.38 E.10781 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.862 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6089 G1 X74.871 Y10.862 E.02942 G1 X74.871 Y14.138 E.10069 G1 X75.829 Y14.138 E.02942 G1 X75.829 Y10.902 E.09946 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.484 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6089 G1 X74.494 Y10.484 E.0526 G1 X74.494 Y14.516 E.12386 G1 X76.206 Y14.516 E.0526 G1 X76.206 Y10.524 E.12263 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.524 ;WIPE_END G1 X70.213 Y7.798 Z17.2 F30000 G1 X7.002 Y-42.052 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z17.2 F30000 G1 X3.498 Y40.648 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z17.2 F30000 G1 X33.602 Y39.152 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z17.2 F30000 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6089 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6089 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z17.2 F30000 G1 X35.602 Y-10.448 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z17.2 F30000 G1 X5.205 Y-10.545 Z17.2 G1 Z16.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:17 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;17 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;17 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.4 I-.351 J1.165 P1 F30000 G1 X76.598 Y10.132 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X76.598 Y14.868 E.15709 G1 X74.102 Y14.868 E.08279 G1 X74.102 Y10.132 E.15709 G1 X76.558 Y10.132 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.725 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X77.005 Y9.725 E.00365 G1 X77.005 Y15.275 E.1841 G1 X73.695 Y15.275 E.1098 G1 X73.695 Y9.725 E.1841 G1 X76.855 Y9.725 E.10482 G1 X76.46 Y9.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X76.46 Y6.71 E.07928 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.71 E.01783 G1 X73.26 Y15.71 E.09833 G1 X73.26 Y9.29 E.19726 G1 X76.42 Y9.29 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.508 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6081 G1 X76.95 Y6.928 E.11458 G1 X75.35 Y13.62 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6081 G1 X75.35 Y11.42 E.10405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.901 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6081 G1 X74.871 Y10.901 E.02942 G1 X74.871 Y14.099 E.09824 G1 X75.829 Y14.099 E.02942 G1 X75.829 Y10.941 E.09702 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.524 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6081 G1 X74.494 Y10.524 E.0526 G1 X74.494 Y14.476 E.12142 G1 X76.206 Y14.476 E.0526 G1 X76.206 Y10.564 E.12019 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.564 ;WIPE_END G1 X70.214 Y7.836 Z17.4 F30000 G1 X7.002 Y-42.052 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z17.4 F30000 G1 X3.498 Y40.648 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z17.4 F30000 G1 X33.602 Y39.152 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 M73 P46 R59 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z17.4 F30000 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6081 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6081 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z17.4 F30000 G1 X35.602 Y-10.448 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z17.4 F30000 G1 X5.205 Y-10.545 Z17.4 G1 Z17 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:17.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;17.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.6 I-.351 J1.165 P1 F30000 G1 X76.598 Y10.132 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X76.598 Y14.868 E.15709 G1 X74.102 Y14.868 E.08279 G1 X74.102 Y10.132 E.15709 G1 X76.558 Y10.132 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.725 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X77.005 Y9.725 E.00365 G1 X77.005 Y15.275 E.1841 G1 X73.695 Y15.275 E.1098 G1 X73.695 Y9.725 E.1841 G1 X76.855 Y9.725 E.10482 G1 X76.46 Y9.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X76.46 Y6.71 E.07928 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.71 E.01783 G1 X73.26 Y15.71 E.09833 G1 X73.26 Y9.29 E.19726 G1 X76.42 Y9.29 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.508 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6081 G1 X76.95 Y6.928 E.11458 G1 X75.35 Y13.62 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6081 G1 X75.35 Y11.42 E.10405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.901 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6081 G1 X74.871 Y10.901 E.02942 G1 X74.871 Y14.099 E.09824 G1 X75.829 Y14.099 E.02942 G1 X75.829 Y10.941 E.09702 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.524 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6081 G1 X74.494 Y10.524 E.0526 G1 X74.494 Y14.476 E.12142 G1 X76.206 Y14.476 E.0526 G1 X76.206 Y10.564 E.12019 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.564 ;WIPE_END G1 X70.214 Y7.836 Z17.6 F30000 G1 X7.002 Y-42.052 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z17.6 F30000 G1 X3.498 Y40.648 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z17.6 F30000 G1 X33.602 Y39.152 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z17.6 F30000 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6081 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6081 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z17.6 F30000 G1 X35.602 Y-10.448 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6081 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z17.6 F30000 G1 X5.205 Y-10.545 Z17.6 G1 Z17.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6081 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6081 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:17.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;17.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z17.8 I-.351 J1.165 P1 F30000 G1 X76.598 Y10.092 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X76.598 Y14.908 E.15973 G1 X74.102 Y14.908 E.08279 G1 X74.102 Y10.092 E.15973 G1 X76.558 Y10.092 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.685 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X77.005 Y9.685 E.00365 G1 X77.005 Y15.315 E.18674 G1 X73.695 Y15.315 E.1098 G1 X73.695 Y9.685 E.18674 G1 X76.855 Y9.685 E.10482 G1 X76.46 Y9.25 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X76.46 Y6.71 E.07806 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.75 E.0166 G1 X73.26 Y15.75 E.09833 G1 X73.26 Y9.25 E.19971 G1 X76.42 Y9.25 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.468 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6089 G1 X76.95 Y6.928 E.11282 G1 X75.35 Y13.66 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6089 G1 X75.35 Y11.38 E.10781 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.862 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6089 G1 X74.871 Y10.862 E.02942 G1 X74.871 Y14.138 E.10069 G1 X75.829 Y14.138 E.02942 G1 X75.829 Y10.902 E.09946 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.484 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6089 G1 X74.494 Y10.484 E.0526 G1 X74.494 Y14.516 E.12386 G1 X76.206 Y14.516 E.0526 G1 X76.206 Y10.524 E.12263 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.524 ;WIPE_END G1 X70.213 Y7.798 Z17.8 F30000 G1 X7.002 Y-42.052 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z17.8 F30000 G1 X3.498 Y40.648 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 M73 P46 R58 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z17.8 F30000 G1 X33.602 Y39.152 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z17.8 F30000 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6089 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6089 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z17.8 F30000 G1 X35.602 Y-10.448 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6089 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z17.8 F30000 G1 X5.205 Y-10.545 Z17.8 G1 Z17.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6089 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6089 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:17.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;17.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18 I-.35 J1.165 P1 F30000 G1 X76.598 Y10.053 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X76.598 Y14.947 E.16237 G1 X74.102 Y14.947 E.08279 G1 X74.102 Y10.053 E.16237 G1 X76.558 Y10.053 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.646 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X77.005 Y9.646 E.00365 G1 X77.005 Y15.354 E.18938 G1 X73.695 Y15.354 E.1098 G1 X73.695 Y9.646 E.18938 G1 X76.855 Y9.646 E.10482 G1 X76.46 Y9.211 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X76.46 Y6.71 E.07683 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.789 E.01538 G1 X73.26 Y15.789 E.09833 G1 X73.26 Y9.211 E.20215 G1 X76.42 Y9.211 E.0971 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.428 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6097 G1 X76.95 Y6.928 E.11105 G1 X75.35 Y13.699 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6097 G1 X75.35 Y11.341 E.11157 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.822 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6097 G1 X74.871 Y10.822 E.02942 G1 X74.871 Y14.178 E.10313 G1 X75.829 Y14.178 E.02942 G1 X75.829 Y10.862 E.1019 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.445 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6097 G1 X74.494 Y10.445 E.0526 G1 X74.494 Y14.555 E.12631 G1 X76.206 Y14.555 E.0526 G1 X76.206 Y10.485 E.12508 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.485 ;WIPE_END G1 X70.211 Y7.761 Z18 F30000 G1 X7.002 Y-42.052 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z18 F30000 G1 X3.498 Y40.648 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z18 F30000 G1 X33.602 Y39.152 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z18 F30000 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6097 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6097 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z18 F30000 G1 X35.602 Y-10.448 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6097 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z18 F30000 G1 X5.205 Y-10.545 Z18 G1 Z17.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6097 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6097 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:17.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;17.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;17.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.2 I-.348 J1.166 P1 F30000 G1 X76.598 Y9.927 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6131 G1 X76.598 Y15.073 E.17072 G1 X74.102 Y15.073 E.08279 G1 X74.102 Y9.927 E.17072 G1 X76.558 Y9.927 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.52 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6131 G1 X77.005 Y9.52 E.00365 G1 X77.005 Y15.48 E.19772 G1 X73.695 Y15.48 E.1098 G1 X73.695 Y9.52 E.19772 G1 X76.855 Y9.52 E.10482 G1 X76.46 Y9.085 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6131 G1 X76.46 Y6.71 E.07298 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y15.915 E.01152 G1 X75.846 Y15.915 E.01887 G1 X74.016 Y15.915 E.05623 G1 X73.26 Y15.915 E.02323 G1 X73.26 Y15.159 E.02323 G1 X73.26 Y9.841 E.16341 G1 X73.26 Y9.085 E.02323 G1 X74.016 Y9.085 E.02323 G1 X75.77 Y9.085 E.0539 G1 X76.42 Y9.085 E.01997 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.302 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F6131 G1 X76.95 Y6.928 E.10546 G1 X75.35 Y13.825 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6131 G1 X75.35 Y11.215 E.12348 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.696 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6131 G1 X74.871 Y10.696 E.02942 G1 X74.871 Y14.304 E.11087 G1 X75.829 Y14.304 E.02942 G1 X75.829 Y10.736 E.10964 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.319 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6131 G1 X74.494 Y10.319 E.0526 G1 X74.494 Y14.681 E.13404 G1 X76.206 Y14.681 E.0526 G1 X76.206 Y10.359 E.13281 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X76.206 Y12.359 ;WIPE_END G1 X70.206 Y7.641 Z18.2 F30000 G1 X7.002 Y-42.052 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6131 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6131 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6131 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z18.2 F30000 G1 X3.498 Y40.648 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6131 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6131 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6131 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z18.2 F30000 G1 X33.602 Y39.152 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6131 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6131 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6131 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z18.2 F30000 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6131 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6131 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z18.2 F30000 G1 X35.602 Y-10.448 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6131 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6131 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6131 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z18.2 F30000 G1 X5.205 Y-10.545 Z18.2 G1 Z17.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6131 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6131 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:18 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;18 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;18 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.4 I-.346 J1.167 P1 F30000 G1 X76.598 Y9.793 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6182 G1 X76.598 Y15.207 E.17958 G1 X74.102 Y15.207 E.08279 G1 X74.102 Y9.793 E.17958 G1 X76.558 Y9.793 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.386 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6182 G1 X77.005 Y9.386 E.00365 G1 X77.005 Y15.614 E.20659 G1 X73.695 Y15.614 E.1098 G1 X73.695 Y9.386 E.20659 G1 X76.855 Y9.386 E.10482 G1 X76.46 Y8.951 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6182 G1 X76.46 Y6.71 E.06886 G1 X77.44 Y6.71 E.03011 G1 X77.44 Y16.29 E.29437 G1 X76.46 Y16.29 E.03011 G1 X76.46 Y16.049 E.00741 G1 X75.843 Y16.049 E.01896 G1 X74.024 Y16.049 E.05589 G1 X73.26 Y16.049 E.02348 G1 X73.26 Y15.285 E.02348 G1 X73.26 Y9.715 E.17115 G1 X73.26 Y8.951 E.02348 G1 X74.024 Y8.951 E.02348 G1 X75.766 Y8.951 E.05353 G1 X76.42 Y8.951 E.0201 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y9.169 F30000 ;TYPE:Gap infill ;WIDTH:0.587924 G1 F6182 G1 X76.95 Y6.928 E.09953 G1 X75.35 Y13.959 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F6182 G1 X75.35 Y11.081 E.13612 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.562 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6182 G1 X74.871 Y10.562 E.02942 G1 X74.871 Y14.438 E.11908 G1 X75.829 Y14.438 E.02942 G1 X75.829 Y10.602 E.11785 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.185 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F6182 G1 X74.494 Y10.185 E.0526 G1 X74.494 Y14.815 E.14225 G1 X76.206 Y14.815 E.0526 G1 X76.206 Y10.225 E.14102 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.678 Y15.952 F30000 ;TYPE:Gap infill ;WIDTH:0.283982 G1 F6182 G1 X77.223 Y15.952 E.01071 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X76.678 Y15.952 ;WIPE_END G1 X70.812 Y11.069 Z18.4 F30000 G1 X7.002 Y-42.052 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6182 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6182 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6182 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z18.4 F30000 G1 X3.498 Y40.648 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6182 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6182 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6182 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z18.4 F30000 G1 X33.602 Y39.152 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6182 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6182 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6182 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z18.4 F30000 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6182 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6182 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z18.4 F30000 G1 X35.602 Y-10.448 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6182 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6182 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6182 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z18.4 F30000 G1 X5.205 Y-10.545 Z18.4 G1 Z18 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6182 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6182 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:18.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;18.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.6 I-.477 J1.12 P1 F30000 G1 X75.061 Y18.311 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;WIDTH:0.37852 G1 F7125 G1 X73.239 Y18.311 E.04983 G1 F1560 G1 X73.239 Y18.176 E.00369 G1 X75.061 Y18.176 E.04983 M106 S255 G1 X75.061 Y18.271 E.0026 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1560 G1 X73.239 Y18.311 G1 X73.239 Y18.176 G1 X73.283 Y18.176 ;WIPE_END G17 G3 Z18.6 I1.136 J.436 P1 F30000 G1 X76.598 Y9.539 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7125 G1 X76.598 Y15.448 E.19601 G1 X74.102 Y15.448 E.08279 G1 X74.102 Y9.539 E.19601 G1 X76.558 Y9.539 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y9.132 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7125 G1 X77.005 Y9.132 E.00365 G1 X77.005 Y15.855 E.22302 G1 X73.695 Y15.868 E.1098 G1 X73.695 Y9.132 E.22345 G1 X76.855 Y9.132 E.10482 G1 X76.46 Y8.697 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7125 G1 X76.46 Y6.803 E.0582 G1 F2400 G1 X76.25 Y6.803 E.00645 G1 F1920 G1 X75.41 Y6.803 E.02581 G1 X74.144 Y6.803 E.0389 G1 X73.26 Y6.803 E.02716 M106 S255 G1 X73.26 Y6.71 E.00286 G1 F6900 G1 X74.051 Y6.71 E.02431 G1 X76.81 Y6.71 E.08478 G1 F7125 G1 X77.44 Y6.71 E.01936 G1 X77.44 Y16.29 E.29437 G1 F2400 G1 X76.25 Y16.294 E.03657 G1 F1920 G1 X73.26 Y16.303 E.09187 M106 S255 G1 X73.26 Y15.419 E.02716 G1 F7125 G1 X73.26 Y9.581 E.17939 G1 F1920 G1 X73.26 Y8.697 E.02716 G1 X74.144 Y8.697 E.02716 G1 X75.41 Y8.697 E.0389 G1 X76.25 Y8.697 E.02581 M106 S255 G1 F2400 G1 X76.42 Y8.697 E.00522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y8.914 F30000 ;TYPE:Gap infill ;WIDTH:0.587924 G1 F7125 G1 X76.95 Y6.928 E.08824 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F7125 G1 X75.35 Y10.827 E.15954 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F7125 G1 X75.829 Y10.308 E.13429 G1 X74.871 Y10.308 E.02942 G1 X74.871 Y14.679 E.13429 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F7125 G1 X76.206 Y9.931 E.15747 G1 X74.494 Y9.931 E.0526 G1 X74.494 Y15.056 E.15747 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z18.6 F30000 G1 X7.002 Y-42.052 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7125 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7125 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7125 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z18.6 F30000 G1 X3.498 Y40.648 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7125 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7125 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7125 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z18.6 F30000 G1 X33.602 Y39.152 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7125 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7125 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7125 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z18.6 F30000 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7125 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7125 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z18.6 F30000 G1 X35.602 Y-10.448 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7125 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7125 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7125 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z18.6 F30000 G1 X5.205 Y-10.545 Z18.6 G1 Z18.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7125 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7125 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:18.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;18.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z18.8 I-.477 J1.12 P1 F30000 G1 X75.04 Y18.29 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8749 G1 X73.26 Y18.29 E.05469 G1 F2400 G1 X73.26 Y17.987 E.00931 G1 F600 G1 X73.26 Y17.787 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X73.26 Y17.711 E.00252 G1 X75.04 Y17.711 E.05905 G1 X75.04 Y17.787 E.00252 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X75.04 Y17.987 E.00615 M106 S255 G1 F2400 G1 X75.04 Y18.25 E.00808 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.823 Y18.001 F30000 ;TYPE:Gap infill ;WIDTH:0.186546 G1 F8749 G1 X73.478 Y18.001 E.01574 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.823 Y18.001 ;WIPE_END G17 G3 Z18.8 I1.194 J.237 P1 F30000 G1 X76.598 Y9.053 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8749 G1 X76.598 Y15.448 E.21212 G1 X74.102 Y15.448 E.08279 G1 X74.102 Y9.053 E.21212 G1 X76.558 Y9.053 E.08146 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.895 Y8.646 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8749 G1 X77.005 Y8.646 E.00365 G1 X77.005 Y15.855 E.23912 G1 X74.605 Y15.855 E.07961 G1 X74.605 Y16.354 E.01654 G1 X73.695 Y16.354 E.03019 G1 X73.695 Y8.646 E.25566 G1 X76.855 Y8.646 E.10482 G1 X76.46 Y8.211 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8749 G1 X76.46 Y7.289 E.02833 G1 F2400 G1 X76.25 Y7.289 E.00645 G1 F600 G1 X76.05 Y7.289 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X73.26 Y7.289 E.09255 G1 X73.26 Y7.213 E.00252 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X73.26 Y7.013 E.00615 M106 S255 G1 F2400 G1 X73.26 Y6.71 E.00931 G1 F8749 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.04 Y16.29 E.07375 G1 F2400 G1 X75.04 Y16.513 E.00685 G1 F600 G1 X75.04 Y16.713 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X75.04 Y16.789 E.00252 G1 X73.26 Y16.789 E.05905 G1 X73.26 Y16.713 E.00252 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X73.26 Y15.673 E.03196 G1 F8749 G1 X73.26 Y9.327 E.19499 G1 F600 G1 X73.26 Y8.287 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X73.26 Y8.211 E.00252 G1 X76.05 Y8.211 E.09255 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X76.25 Y8.211 E.00615 M106 S255 G1 F2400 G1 X76.42 Y8.211 E.00522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.95 Y8.429 F30000 ;TYPE:Gap infill ;WIDTH:0.587922 G1 F8749 G1 X76.95 Y6.928 E.06668 G1 X77.223 Y7.272 F30000 ;WIDTH:0.306236 G1 F8749 G1 X77.041 Y7.181 E.00436 ;WIDTH:0.25836 G1 X76.859 Y7.09 E.00357 ;WIDTH:0.189406 G1 X76.678 Y6.999 E.00242 G1 X73.478 Y6.999 E.0382 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.478 Y6.999 ;WIPE_END G17 G3 Z18.8 I-1.217 J.026 P1 F30000 G1 X75.527 Y9.264 Z18.8 G1 Z18.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8749 G1 X76.387 Y9.264 E.02854 G3 X76.291 Y10.395 I-2.178 J.384 E.03805 G1 X75.753 Y11.05 E.02812 G2 X75.326 Y13.015 I1.142 J1.277 E.0713 G3 X76.355 Y14.326 I-14.221 J12.222 E.05528 G3 X76.387 Y15.237 I-2.704 J.551 E.03038 G1 X75.479 Y15.237 E.03012 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y15.237 G1 X76.355 Y14.326 G1 X76.244 Y14.184 ;WIPE_END G1 X70.319 Y9.372 Z18.8 F30000 G1 X7.002 Y-42.052 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8749 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8749 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8749 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z18.8 F30000 G1 X3.498 Y40.648 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8749 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8749 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8749 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z18.8 F30000 G1 X33.602 Y39.152 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8749 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8749 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 M73 P47 R58 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8749 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z18.8 F30000 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8749 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8749 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z18.8 F30000 G1 X35.602 Y-10.448 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8749 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8749 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8749 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z18.8 F30000 G1 X5.205 Y-10.545 Z18.8 G1 Z18.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8749 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8749 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:18.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;18.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10451 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y8.901 E.21718 G1 F2400 G1 X74.102 Y8.001 E.02985 G1 F600 G1 X74.102 Y7.801 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X74.102 Y7.699 E.00338 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X74.102 Y7.552 E.00488 G1 F1800 G1 X75.056 Y7.552 E.03165 G1 X75.35 Y7.552 E.00975 G1 X76.25 Y7.552 E.02985 M106 S255 G1 F2400 G1 X76.598 Y7.552 E.01154 G1 F10451 G1 X76.598 Y8.104 E.01831 G1 X76.598 Y15.448 E.24361 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2400 G1 X74.605 Y16.999 E.03795 G1 F600 G1 X74.605 Y17.199 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X74.605 Y17.301 E.00338 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X74.605 Y17.501 E.00663 M106 S255 G1 F2400 G1 X74.605 Y17.855 E.01174 G1 F10451 G1 X73.695 Y17.855 E.03019 G1 F2400 G1 X73.695 Y17.501 E.01174 G1 F600 G1 X73.695 Y17.301 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X73.695 Y17.199 E.00338 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X73.695 Y16.099 E.03649 G1 F10451 G1 X73.695 Y8.901 E.23877 G1 F600 G1 X73.695 Y7.801 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X73.695 Y7.699 E.00338 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X73.695 Y7.499 E.00663 M106 S255 G1 F2400 G1 X73.695 Y7.145 E.01174 G1 F10451 G1 X74.241 Y7.145 E.01811 G1 X76.75 Y7.145 E.08323 G1 X77.005 Y7.145 E.00846 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2400 G1 X75.04 Y16.999 E.02179 G1 F600 G1 X75.04 Y17.199 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X75.04 Y17.301 E.00338 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X75.04 Y17.501 E.00615 M106 S255 G1 F2400 G1 X75.04 Y18.29 E.02424 G1 F10451 G1 X73.26 Y18.29 E.05469 G1 F2400 G1 X73.26 Y17.501 E.02424 G1 F600 G1 X73.26 Y17.301 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X73.26 Y17.199 E.00338 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X73.26 Y16.159 E.03196 G1 F10451 G1 X73.26 Y8.841 E.22486 G1 F600 G1 X73.26 Y7.801 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X73.26 Y7.699 E.00338 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X73.26 Y7.499 E.00615 M106 S255 G1 F2400 G1 X73.26 Y6.71 E.02424 G1 F10451 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X76.81 Y16.29 E.01936 G1 X75.65 Y16.29 E.03564 G1 X75.08 Y16.29 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y17.199 G1 X75.04 Y17.301 G1 X75.04 Y18.289 ;WIPE_END G1 X74.15 Y15.651 Z19 F30000 G1 Z18.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F10451 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G17 G3 Z19 I.938 J.775 P1 F30000 G1 X75.35 Y14.2 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F10451 G1 X75.35 Y10.964 E.15305 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y10.445 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F10451 G1 X74.871 Y10.445 E.02942 G1 X74.871 Y14.679 E.13008 G1 X75.829 Y14.679 E.02942 G1 X75.829 Y10.485 E.12885 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y10.068 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F10451 G1 X74.494 Y10.068 E.0526 G1 X74.494 Y15.056 E.15325 G1 X76.206 Y15.056 E.0526 G1 X76.206 Y10.108 E.15202 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y7.787 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 G1 F1500 G1 X76.25 Y7.787 E.00989 G1 F600 G1 X74.298 Y7.787 E.05998 G1 X74.298 Y8.001 E.00658 G1 F1500 G1 X74.298 Y8.164 E.00501 G1 X76.402 Y8.164 E.06465 G1 X76.402 Y8.541 E.01158 G1 X74.298 Y8.541 E.06465 G1 X74.298 Y8.918 E.01158 G1 X76.402 Y8.918 E.06465 G1 X76.402 Y9.295 E.01158 G1 X74.298 Y9.295 E.06465 G1 X74.298 Y9.672 E.01158 G1 X76.572 Y9.672 E.06987 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X74.572 Y9.672 ;WIPE_END G17 G3 Z19 I.74 J-.966 P1 F30000 G1 X7.002 Y-42.052 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10451 M106 S255 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10451 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10451 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.947 Y-35.581 Z19 F30000 G1 X3.498 Y40.648 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10451 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10451 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10451 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P47 R57 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z19 F30000 G1 X33.602 Y39.152 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10451 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35.152 E.13269 G1 X35.998 Y35.152 E.01313 G1 X35.998 Y40.648 E.18231 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10451 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y34.745 E.13269 G1 X36.405 Y34.745 E.04014 G1 X36.405 Y41.055 E.20931 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10451 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y34.31 E.12291 G1 X36.84 Y34.31 E.06391 G1 X36.84 Y41.49 E.22062 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z19 F30000 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F10451 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F10451 G1 X35.21 Y39.9 E.02345 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END G1 X34.54 Y32.27 Z19 F30000 G1 X35.602 Y-10.448 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10451 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y-6.952 E.11596 G1 X35.602 Y-6.952 E.01313 G1 X35.602 Y-10.408 E.11464 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F10451 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-6.545 E.14297 G1 X35.195 Y-6.545 E.04014 G1 X35.195 Y-10.505 E.13136 G1 X34.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10451 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-6.11 E.15917 G1 X34.76 Y-6.11 E.06391 G1 X34.76 Y-10.07 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y-10.09 ;WIPE_END G1 X25.129 Y-10.216 Z19 F30000 G1 X5.205 Y-10.545 Z19 G1 Z18.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F10451 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F10451 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 ;LAYER_CHANGE ;Z:18.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;18.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;18.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.2 I-.442 J1.134 P1 F30000 G1 X74.198 Y15.448 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 F15600 G1 X73.695 Y17.855 E.03019 G1 F18000 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y16.833 E.01668 G1 F11580 G1 X75.04 Y17.66 E.02541 G1 F12000 G1 X75.04 Y18.29 E.01936 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X76.81 Y16.29 E.01936 G1 X75.65 Y16.29 E.03564 G1 X75.08 Y16.29 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z19.2 F30000 G1 Z18.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F13184.75 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z19.2 F30000 G1 X7.002 Y-42.052 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z19.2 F30000 G1 X5.205 Y-10.545 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.282 Y-3.664 Z19.2 F30000 G1 X3.498 Y40.648 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.608 E1.11643 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.745 E1.13448 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z19.2 F30000 G1 X33.602 Y39.152 Z19.2 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y35 E.13773 G1 F2400 G1 X35.602 Y34.1 E.02985 G1 F600 G1 X35.602 Y33.9 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X35.602 Y32.8 E.03649 G1 X35.602 Y-4.6 E1.24063 G1 X35.602 Y-5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X35.602 Y-5.9 E.00663 M106 S255 G1 F2400 G1 X35.602 Y-6.8 E.02985 G1 F18000 G1 X35.602 Y-10.448 E.12101 G1 X35.998 Y-10.448 E.01314 G1 X35.998 Y-6.8 E.12101 G1 F2400 G1 X35.998 Y-5.9 E.02985 G1 F600 G1 X35.998 Y-5.7 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X35.998 Y-4.6 E.03649 G1 X35.998 Y32.8 E1.24063 G1 X35.998 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X35.998 Y34.1 E.00663 M106 S255 G1 F2400 G1 X35.998 Y35 E.02985 G1 F18000 G1 X35.998 Y40.648 E.18735 G1 X33.602 Y40.648 E.07948 G1 X33.602 Y39.192 E.0483 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y35 E.12423 G1 F2400 G1 X35.195 Y34.1 E.02985 G1 F600 G1 X35.195 Y33.9 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X35.195 Y32.8 E.03649 G1 X35.195 Y-4.6 E1.24063 G1 X35.195 Y-5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X35.195 Y-5.9 E.00663 M106 S255 G1 F2400 G1 X35.195 Y-6.8 E.02985 G1 F18000 G1 X35.195 Y-10.545 E.12423 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y-10.6 E.00846 G1 X36.405 Y-6.8 E.12605 G1 F2400 G1 X36.405 Y-5.9 E.02985 G1 F600 G1 X36.405 Y-5.7 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X36.405 Y-4.6 E.03649 G1 X36.405 Y32.8 E1.24063 G1 X36.405 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X36.405 Y34.1 E.00663 M106 S255 G1 F2400 G1 X36.405 Y35 E.02985 G1 F18000 G1 X36.405 Y40.8 E.1924 G1 X36.405 Y41.055 E.00846 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X33.39 Y38.31 E.01936 G1 X34.217 Y38.31 E.02541 G1 X34.76 Y38.31 E.01668 G1 X34.76 Y37.767 E.01668 G1 X34.76 Y34.94 E.08687 G1 F2400 G1 X34.76 Y34.1 E.02581 G1 F600 G1 X34.76 Y33.9 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X34.76 Y32.8 E.03649 G1 X34.76 Y-4.6 E1.24063 G1 X34.76 Y-5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X34.76 Y-5.9 E.00615 M106 S255 G1 F2400 G1 X34.76 Y-6.74 E.02581 G1 F12000 G1 X34.76 Y-9.567 E.08687 G1 X34.76 Y-10.11 E.01668 G1 X34.217 Y-10.11 E.01668 G1 X31.39 Y-10.11 E.08687 G1 X30.76 Y-10.11 E.01936 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y-10.66 E.01936 G1 X36.84 Y-6.74 E.12045 G1 F2400 G1 X36.84 Y-5.9 E.02581 G1 F600 G1 X36.84 Y-5.7 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X36.84 Y-4.6 E.03649 G1 X36.84 Y32.8 E1.24063 G1 X36.84 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X36.84 Y34.1 E.00615 M106 S255 G1 F2400 G1 X36.84 Y34.94 E.02581 G1 F12000 G1 X36.84 Y40.86 E.18191 G1 X36.84 Y41.49 E.01936 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X31.39 Y40.31 E.01936 G1 X32.217 Y40.31 E.02541 G1 X32.76 Y40.31 E.01668 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z19.2 F30000 G1 Z18.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:19 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;19 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;19 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.4 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8875 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8875 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8875 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z19.4 F30000 G1 Z19 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8875 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y15.046 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8875 G1 X76.387 Y13.417 E.05401 G3 X74.826 Y11.983 I.7 J-2.329 E.07275 G1 X74.498 Y11.08 E.03188 G1 X74.313 Y11.133 E.00639 G1 X74.313 Y10.509 E.0207 G1 X74.498 Y11.02 E.01801 G2 X76.387 Y10.04 I-.699 J-3.659 E.07157 G1 X76.387 Y9.344 E.02311 G1 X75.455 Y9.344 E.0309 G1 X76.206 Y8.952 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8875 G1 X76.206 Y7.944 E.03096 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y8.952 E.03096 G1 X76.166 Y8.952 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.86 Y8.605 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.358108 G1 F8875 G1 X75.86 Y8.29 E.0081 G1 X74.84 Y8.29 E.02618 G1 X74.84 Y8.605 E.0081 G1 X75.82 Y8.605 E.02516 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.84 Y8.605 G1 X74.84 Y8.29 G1 X75.546 Y8.29 ;WIPE_END G1 X69.394 Y3.772 Z19.4 F30000 G1 X7.002 Y-42.052 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8875 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8875 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8875 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z19.4 F30000 G1 X5.205 Y-10.545 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8875 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8875 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z19.4 F30000 G1 X3.498 Y40.31 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8875 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8875 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8875 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z19.4 F30000 G1 X33.602 Y39.152 Z19.4 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8875 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8875 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8875 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z19.4 F30000 G1 Z19 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8875 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8875 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:19.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;19.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.6 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8809 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z19.6 F30000 G1 Z19.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8809 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.83 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8809 G1 X76.387 Y13.202 E.05401 G1 X75.809 Y13.08 E.0196 G1 X75.153 Y12.656 E.0259 G1 X74.498 Y11.816 E.03532 G1 X74.313 Y11.672 E.00778 G1 X74.313 Y10.046 E.05394 G2 X74.826 Y10.539 I1.237 J-.775 E.02382 G2 X76.387 Y10.085 I.298 J-1.886 E.05571 G1 X76.387 Y7.96 E.07047 G1 X75.809 Y7.839 E.0196 G1 X75.691 Y7.763 E.00463 G1 X74.313 Y7.763 E.04572 G1 X74.313 Y8.013 E.0083 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y7.763 G1 X75.691 Y7.763 G1 X75.809 Y7.839 G1 X76.036 Y7.887 ;WIPE_END G1 X69.852 Y3.413 Z19.6 F30000 G1 X7.002 Y-42.052 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8809 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z19.6 F30000 G1 X5.205 Y-10.545 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8809 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z19.6 F30000 G1 X3.498 Y40.31 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8809 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z19.6 F30000 G1 X33.602 Y39.152 Z19.6 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8809 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z19.6 F30000 G1 Z19.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8809 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8809 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:19.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;19.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z19.8 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8814 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8814 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8814 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z19.8 F30000 G1 Z19.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8814 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.67 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8814 G1 X76.387 Y13.042 E.05401 G1 X75.809 Y13.035 E.01919 G1 X75.153 Y12.742 E.02381 G2 X74.313 Y11.935 I-5.753 J5.147 E.03869 G1 X74.313 Y9.824 E.07003 G2 X76.387 Y10.156 I1.196 J-.829 E.07782 G1 X76.387 Y7.8 E.07813 G1 X74.313 Y7.763 E.0688 G1 X74.313 Y7.965 E.00668 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y7.763 G1 X76.111 Y7.796 ;WIPE_END G1 X69.921 Y3.331 Z19.8 F30000 G1 X7.002 Y-42.052 Z19.8 G1 Z19.4 M73 P48 R57 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8814 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8814 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8814 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z19.8 F30000 G1 X5.205 Y-10.545 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8814 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8814 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z19.8 F30000 G1 X3.498 Y40.31 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8814 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8814 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8814 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P48 R56 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z19.8 F30000 G1 X33.602 Y39.152 Z19.8 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8814 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8814 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8814 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X33.994 Y39.544 Z19.8 F30000 G1 Z19.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8814 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8814 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:19.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;19.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8648 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8648 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8648 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z20 F30000 G1 Z19.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8648 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y13.256 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8648 G1 X74.313 Y14.884 E.05401 G2 X74.766 Y15.237 I4.235 J-4.973 E.01906 G1 X76.387 Y15.237 E.05375 G1 X76.387 Y12.919 E.07689 G3 X75.153 Y12.843 I-.532 J-1.4 E.04226 G2 X74.313 Y12.166 I-8.101 J9.205 E.03579 G1 X74.313 Y9.643 E.08372 G1 X74.498 Y9.795 E.00794 G2 X76.387 Y10.242 I1.261 J-1.113 E.06863 G1 X76.387 Y8.614 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y10.242 G1 X76.028 Y10.338 ;WIPE_END G1 X69.948 Y5.723 Z20 F30000 G1 X7.002 Y-42.052 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8648 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8648 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8648 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z20 F30000 G1 X5.205 Y-10.545 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8648 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8648 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z20 F30000 G1 X3.498 Y40.31 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8648 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8648 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8648 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z20 F30000 G1 X33.602 Y39.152 Z20 G1 Z19.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8648 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8648 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8648 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 ;LAYER_CHANGE ;Z:19.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;19.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END ;AFTER_LAYER_CHANGE ;19.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.2 I.61 J1.053 P1 F30000 G1 X74.198 Y15.448 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8625 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8625 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8625 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z20.2 F30000 G1 Z19.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8625 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y15.043 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8625 G1 X76.387 Y15.237 E.00642 G1 X74.952 Y15.237 E.0476 G2 X74.313 Y14.705 I-2.56 J2.423 E.02765 G1 X74.313 Y12.343 E.07834 G1 X74.498 Y12.508 E.00822 G2 X76.387 Y12.822 I1.153 J-1.097 E.06814 G1 X76.387 Y10.35 E.08199 G3 X75.153 Y10.175 I-.421 J-1.466 E.04257 G2 X74.313 Y9.463 I-3.415 J3.181 E.03661 G1 X74.313 Y7.835 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X74.313 Y9.463 G1 X74.597 Y9.703 ;WIPE_END G1 X68.537 Y5.063 Z20.2 F30000 G1 X7.002 Y-42.052 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8625 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8625 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8625 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z20.2 F30000 G1 X5.205 Y-10.545 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8625 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8625 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z20.2 F30000 G1 X3.498 Y40.31 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8625 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8625 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8625 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z20.2 F30000 G1 X33.602 Y39.152 Z20.2 G1 Z19.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8625 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8625 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8625 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 ;LAYER_CHANGE ;Z:20 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;20 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END ;AFTER_LAYER_CHANGE ;20 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.4 I.61 J1.053 P1 F30000 G1 X74.198 Y15.448 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8656 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8656 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8656 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z20.4 F30000 G1 Z20 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8656 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.92 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8656 G1 X76.387 Y15.237 E.01052 G1 X75.076 Y15.237 E.04349 G2 X74.313 Y14.449 I-3.144 J2.279 E.03651 G1 X74.313 Y12.536 E.06345 G2 X74.826 Y13.01 I1.92 J-1.56 E.02325 G2 X76.387 Y12.743 I.518 J-1.663 E.05454 G1 X76.387 Y10.488 E.0748 G1 X75.809 Y10.431 E.01927 G1 X75.153 Y10.081 E.02465 G2 X74.313 Y9.207 I-3.483 J2.508 E.04035 G1 X74.313 Y7.763 E.0479 G3 X75.153 Y7.875 I.247 J1.365 E.02857 G1 X75.898 Y7.763 E.02496 G1 X76.387 Y7.763 E.01623 G1 X76.387 Y8.902 E.03778 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X75.898 Y7.763 G1 X75.53 Y7.818 ;WIPE_END G1 X69.359 Y3.327 Z20.4 F30000 G1 X7.002 Y-42.052 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8656 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8656 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8656 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z20.4 F30000 G1 X5.205 Y-10.545 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8656 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8656 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z20.4 F30000 G1 X3.498 Y40.31 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8656 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8656 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8656 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z20.4 F30000 G1 X33.602 Y39.152 Z20.4 G1 Z20 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8656 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8656 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8656 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 ;LAYER_CHANGE ;Z:20.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;20.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.6 I.61 J1.053 P1 F30000 G1 X74.198 Y15.448 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8654 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8654 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8654 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z20.6 F30000 G1 Z20.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8654 G1 X74.15 Y17.651 E.08196 G1 X76.387 Y14.844 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8654 G1 X76.387 Y15.237 E.01302 G1 X75.151 Y15.237 E.041 G1 X74.498 Y14.253 E.03916 G1 X74.313 Y14.127 E.00743 G1 X74.313 Y12.809 E.04373 G2 X74.826 Y13.311 I.874 J-.379 E.02441 G2 X76.387 Y12.677 I-.004 J-2.248 E.05729 G1 X76.387 Y10.67 E.0666 G1 X75.809 Y10.49 E.02009 G1 X75.153 Y9.999 E.02716 G1 X74.498 Y9.012 E.0393 G1 X74.313 Y8.886 E.00743 G1 X74.313 Y7.763 E.03724 G1 X74.443 Y7.763 E.00431 G2 X74.826 Y8.07 I.569 J-.317 E.01668 G2 X75.809 Y7.869 I.179 J-1.629 E.03381 G1 X75.95 Y7.763 E.00588 G1 X76.387 Y7.763 E.01448 G1 X76.387 Y8.955 E.03954 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X75.95 Y7.763 G1 X75.809 Y7.869 G1 X75.623 Y7.927 ;WIPE_END G1 X69.453 Y3.434 Z20.6 F30000 G1 X7.002 Y-42.052 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8654 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8654 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8654 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z20.6 F30000 G1 X5.205 Y-10.545 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8654 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8654 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z20.6 F30000 G1 X3.498 Y40.31 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8654 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8654 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8654 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z20.6 F30000 G1 X33.602 Y39.152 Z20.6 G1 Z20.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8654 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8654 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8654 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 ;LAYER_CHANGE ;Z:20.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;20.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z20.8 I.61 J1.053 P1 F30000 G1 X74.198 Y15.448 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8615 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8615 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8615 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z20.8 F30000 G1 Z20.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8615 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.544 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8615 G1 X74.313 Y15.237 E.023 G1 X75.248 Y15.237 E.03102 G3 X74.831 Y14.326 I1.101 J-1.055 E.03387 G3 X75.029 Y13.671 I.568 J-.186 E.02417 G1 X76.061 Y13.015 E.04055 G1 X76.387 Y12.593 E.0177 G1 X76.387 Y10.922 E.05544 G3 X74.831 Y9.084 I1.101 J-2.51 E.08269 G3 X75.029 Y8.429 I.568 J-.186 E.02417 G1 X76.069 Y7.763 E.04098 G1 X74.441 Y7.763 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.069 Y7.763 G1 X75.756 Y7.964 ;WIPE_END G1 X69.584 Y3.474 Z20.8 F30000 G1 X7.002 Y-42.052 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8615 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8615 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8615 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z20.8 F30000 G1 X5.205 Y-10.545 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8615 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8615 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z20.8 F30000 G1 X3.498 Y40.31 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8615 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8615 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8615 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z20.8 F30000 G1 X33.602 Y39.152 Z20.8 G1 Z20.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8615 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8615 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8615 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 ;LAYER_CHANGE ;Z:20.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;20.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z21 I.61 J1.053 P1 F30000 G1 X74.198 Y15.448 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8607 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8607 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8607 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z21 F30000 G1 Z20.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8607 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.55 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8607 G1 X74.313 Y15.237 E.0228 G1 X75.254 Y15.237 E.03122 G1 X75.112 Y14.981 E.00971 G1 X75.035 Y14.326 E.02188 G1 X75.133 Y13.998 E.01134 G3 X76.141 Y13.015 I3.584 J2.668 E.0469 G1 X76.387 Y12.573 E.01678 G1 X76.387 Y11.259 E.04358 G2 X75.476 Y10.395 I-3.165 J2.423 E.04184 G3 X75.035 Y9.084 I1.373 J-1.191 E.04704 G1 X75.133 Y8.757 E.01134 G3 X76.141 Y7.774 I3.584 J2.668 E.0469 G1 X74.519 Y7.763 E.05381 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.141 Y7.774 G1 X75.859 Y8.025 ;WIPE_END G1 X69.686 Y3.535 Z21 F30000 G1 X7.002 Y-42.052 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8607 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8607 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8607 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z21 F30000 G1 X5.205 Y-10.545 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8607 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8607 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z21 F30000 G1 X3.498 Y40.31 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8607 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8607 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8607 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z21 F30000 G1 X33.602 Y39.152 Z21 G1 Z20.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8607 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8607 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8607 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 ;LAYER_CHANGE ;Z:20.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;20.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END ;AFTER_LAYER_CHANGE ;20.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z21.2 I.61 J1.053 P1 F30000 G1 X74.198 Y15.448 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8777 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8777 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 M73 P48 R55 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8777 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z21.2 F30000 G1 Z20.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8777 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.534 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8777 G1 X74.313 Y15.237 E.02332 G1 X75.238 Y15.237 E.03069 G1 X75.145 Y14.981 E.00904 G1 X75.191 Y14.326 E.02179 G3 X76.234 Y13.015 I4.197 J2.269 E.05583 G1 X76.387 Y12.594 E.01488 G1 X76.387 Y11.626 E.03211 G2 X75.977 Y11.05 I-1.292 J.485 E.02372 G3 X75.191 Y9.084 I1.199 J-1.619 E.07393 G3 X76.234 Y7.774 I4.197 J2.269 E.05583 G1 X74.609 Y7.763 E.05388 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.234 Y7.774 G1 X75.983 Y8.054 ;WIPE_END G1 X69.808 Y3.568 Z21.2 F30000 G1 X7.002 Y-42.052 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8777 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8777 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8777 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z21.2 F30000 G1 X5.205 Y-10.545 Z21.2 G1 Z20.8 M73 P49 R55 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8777 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8777 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z21.2 F30000 G1 X3.498 Y40.31 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8777 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8777 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8777 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z21.2 F30000 G1 X33.602 Y39.152 Z21.2 G1 Z20.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8777 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8777 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8777 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X34.707 Y40.437 Z21.2 F30000 G1 Z20.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8777 G1 X33.813 Y40.437 E.02966 G1 X33.813 Y39.703 E.02435 G1 X34.121 Y39.363 E.0152 G1 X35.749 Y39.363 E.05401 ;LAYER_CHANGE ;Z:21 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;21 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X34.121 Y39.363 G1 X33.871 Y39.639 ;WIPE_END ;AFTER_LAYER_CHANGE ;21 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z21.4 I.626 J1.044 P1 F30000 G1 X74.198 Y15.448 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8780 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8780 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8780 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z21.4 F30000 G1 Z21 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8780 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.496 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8780 G1 X74.313 Y15.237 E.02458 G1 X75.201 Y15.237 E.02944 G1 X75.153 Y14.981 E.00864 G1 X75.315 Y14.326 E.02239 G2 X76.342 Y13.015 I-23.021 J-19.11 E.05524 G2 X76.302 Y11.705 I-3.377 J-.552 E.04376 G1 X75.774 Y11.05 E.02792 G3 X75.315 Y9.084 I1.146 J-1.304 E.07145 G2 X76.342 Y7.774 I-23.021 J-19.11 E.05524 G1 X74.716 Y7.763 E.05395 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.342 Y7.774 G1 X76.112 Y8.068 ;WIPE_END G1 X69.933 Y3.587 Z21.4 F30000 G1 X7.002 Y-42.052 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8780 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8780 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8780 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z21.4 F30000 G1 X5.205 Y-10.545 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8780 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8780 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z21.4 F30000 G1 X3.498 Y40.31 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8780 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8780 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8780 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z21.4 F30000 G1 X33.602 Y39.152 Z21.4 G1 Z21 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8780 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8780 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8780 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X34.938 Y40.437 Z21.4 F30000 G1 Z21 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8780 G1 X33.813 Y40.437 E.03731 G1 X33.813 Y39.933 E.0167 G2 X34.25 Y39.363 I-10.025 J-8.133 E.02383 G1 X35.787 Y39.363 E.05098 G1 X35.787 Y39.455 E.00303 ;LAYER_CHANGE ;Z:21.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;21.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X35.787 Y39.363 G1 X34.25 Y39.363 G1 X34.024 Y39.658 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z21.6 I.628 J1.042 P1 F30000 G1 X74.198 Y15.448 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8784 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8784 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8784 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z21.6 F30000 G1 Z21.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8784 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.434 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8784 G1 X74.313 Y15.237 E.02664 G1 X75.138 Y15.237 E.02738 G1 X75.137 Y14.981 E.00849 G1 X75.417 Y14.326 E.02364 G2 X76.387 Y13.221 I-2.846 J-3.476 E.04898 G1 X76.387 Y12.142 E.03579 G1 X76.2 Y11.705 E.01576 G3 X75.283 Y10.722 I7.455 J-7.873 E.04461 G3 X75.417 Y9.084 I1.593 J-.694 E.05678 G1 X76.053 Y8.429 E.03029 G2 X76.387 Y7.763 I-.348 J-.591 E.02612 G1 X74.975 Y7.763 E.04684 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X76.334 Y8.102 G1 X76.174 Y8.288 ;WIPE_END G1 X70.003 Y3.797 Z21.6 F30000 G1 X7.002 Y-42.052 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8784 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8784 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8784 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z21.6 F30000 G1 X5.205 Y-10.545 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8784 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8784 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z21.6 F30000 G1 X3.498 Y40.31 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8784 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8784 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8784 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z21.6 F30000 G1 X33.602 Y39.152 Z21.6 G1 Z21.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8784 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8784 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8784 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X35.145 Y40.437 Z21.6 F30000 G1 Z21.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8784 G1 X33.813 Y40.437 E.04417 G3 X34.068 Y39.877 I.416 J-.148 E.02258 G2 X34.43 Y39.363 I-.65 J-.841 E.02116 G1 X35.787 Y39.363 E.04501 G1 X35.787 Y39.634 E.009 ;LAYER_CHANGE ;Z:21.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;21.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X35.787 Y39.363 G1 X34.43 Y39.363 G1 X34.349 Y39.549 G1 X34.239 Y39.677 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z21.8 I.631 J1.041 P1 F30000 G1 X74.198 Y15.448 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8809 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z21.8 F30000 G1 Z21.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8809 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.341 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8809 G1 X74.313 Y15.237 E.0297 G1 X75.046 Y15.237 E.02431 G1 X75.094 Y14.981 E.00864 G1 X75.505 Y14.326 E.02565 G1 X76.387 Y13.584 E.03822 G1 X76.387 Y12.143 E.04781 G1 X76.112 Y11.705 E.01716 G1 X75.298 Y11.05 E.03466 G1 X75.039 Y10.722 E.01386 G3 X75.505 Y9.084 I1.893 J-.347 E.05851 G1 X76.387 Y8.343 E.03822 G1 X76.387 Y7.763 E.01924 G1 X75.339 Y7.763 E.03478 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X76.387 Y8.343 G1 X76.102 Y8.582 ;WIPE_END G1 X69.946 Y4.071 Z21.8 F30000 G1 X7.002 Y-42.052 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8809 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z21.8 F30000 G1 X5.205 Y-10.545 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8809 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z21.8 F30000 G1 X3.498 Y40.31 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8809 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z21.8 F30000 G1 X33.602 Y39.152 Z21.8 G1 Z21.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8809 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8809 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8809 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X34.428 Y39.363 Z21.8 F30000 G1 Z21.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8809 G1 X33.813 Y39.363 E.02041 G1 X33.813 Y40.296 E.03096 G2 X34.632 Y39.363 I-.721 J-1.458 E.04225 G1 X35.787 Y39.363 E.03831 G1 X35.787 Y40.063 E.02322 G2 X35.627 Y40.437 I.293 J.347 E.01398 G1 X33.998 Y40.437 E.05401 ;LAYER_CHANGE ;Z:21.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;21.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X35.627 Y40.437 G1 X35.675 Y40.205 G1 X35.758 Y40.099 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z22 I.657 J1.024 P1 F30000 G1 X74.198 Y15.448 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8818 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8818 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8818 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z22 F30000 G1 Z21.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8818 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.208 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8818 G1 X74.313 Y15.237 E.03412 G1 X74.913 Y15.237 E.01989 G1 X75.021 Y14.981 E.00922 G3 X76.387 Y13.888 I2.533 J1.765 E.05884 G1 X76.387 Y12.116 E.05877 G1 X76.034 Y11.705 E.01796 G2 X74.757 Y11.05 I-4.04 J6.305 E.0477 G1 X74.66 Y10.722 E.01134 G3 X76.387 Y8.646 I2.761 J.541 E.09343 G1 X76.387 Y7.763 E.0293 G1 X75.642 Y7.763 E.02471 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X76.387 Y8.646 G1 X76.06 Y8.824 ;WIPE_END G1 X69.916 Y4.297 Z22 F30000 G1 X7.002 Y-42.052 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8818 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8818 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8818 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.961 Y-35.581 Z22 F30000 G1 X5.205 Y-10.545 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8818 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8818 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X5.28 Y-3.664 Z22 F30000 G1 X3.498 Y40.31 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8818 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y40.27 E1.10522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8818 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y40.27 E1.11872 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8818 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y40.27 E1.04964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.966 Y39.976 Z22 F30000 G1 X33.602 Y39.152 Z22 G1 Z21.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8818 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8818 G1 X35.195 Y38.745 E.06634 G1 X35.195 Y-10.545 E1.63504 G1 X31.195 Y-10.545 E.13269 G1 X31.195 Y-10.855 E.01028 G1 X36.405 Y-10.855 E.17283 G1 X36.405 Y41.055 E1.72195 G1 X31.195 Y41.055 E.17283 G1 X31.195 Y40.745 E.01028 G1 X33.195 Y40.745 E.06634 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8818 G1 X34.76 Y38.31 E.06145 G1 X34.76 Y-10.11 E1.48781 G1 X30.76 Y-10.11 E.12291 G1 X30.76 Y-11.29 E.03626 G1 X36.84 Y-11.29 E.18682 G1 X36.84 Y41.49 E1.62178 G1 X30.76 Y41.49 E.18682 G1 X30.76 Y40.31 E.03626 G1 X32.76 Y40.31 E.06145 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.76 Y38.31 ;WIPE_END G1 X34.397 Y39.363 Z22 F30000 G1 Z21.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8818 G1 X33.813 Y39.363 E.01938 G1 X33.813 Y40.407 E.03463 G3 X34.875 Y39.877 I3.284 J5.25 E.03944 G2 X34.925 Y39.363 I-.403 J-.298 E.01799 G1 X35.787 Y39.363 E.0286 G1 X35.787 Y39.696 E.01105 G1 X35.393 Y39.877 E.01438 G2 X35.355 Y40.437 I.447 J.311 E.01955 G1 X33.987 Y40.437 E.04539 ;LAYER_CHANGE ;Z:21.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;21.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X35.355 Y40.437 G1 X35.295 Y40.205 G1 X35.393 Y39.877 G1 X35.438 Y39.856 ;WIPE_END ;AFTER_LAYER_CHANGE ;21.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z22.2 I.648 J1.03 P1 F30000 G1 X74.198 Y15.448 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z22.2 F30000 G1 Z21.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y14.039 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X74.313 Y15.237 E.03975 G1 X74.743 Y15.237 E.01427 G3 X75.809 Y14.254 I1.953 J1.048 E.04898 G1 X76.387 Y14.12 E.01969 G1 X76.387 Y12.022 E.06961 G2 X75.153 Y11.482 I-1.327 J1.353 E.04566 G2 X74.313 Y12.025 I.105 J1.084 E.03448 G1 X74.313 Y10.462 E.05186 G1 X74.498 Y10.32 E.00773 G1 X75.153 Y9.452 E.03606 G1 X75.809 Y9.013 E.02617 G1 X76.387 Y8.879 E.01969 G1 X76.387 Y7.763 E.03701 G1 X75.874 Y7.763 E.017 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X76.387 Y8.879 G1 X76.025 Y8.963 ;WIPE_END G1 X69.887 Y4.426 Z22.2 F30000 G1 X7.002 Y-42.052 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.799 Y-35.588 Z22.2 F30000 G1 X3.498 Y9.048 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.498 Y40.648 E1.04823 G1 X3.102 Y40.648 E.01314 G1 X3.102 Y6.8 E1.1228 G1 F2400 G1 X3.102 Y5.9 E.02985 G1 F600 G1 X3.102 Y5.7 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y4.6 E.03649 G1 X3.102 Y-8.09 E.42095 G1 X3.102 Y-10.448 E.07822 G1 X3.498 Y-10.448 E.01314 G1 X3.498 Y-8.486 E.06508 G1 X3.498 Y4.6 E.43409 G1 X3.498 Y5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.498 Y5.9 E.00663 M106 S255 G1 F2400 G1 X3.498 Y6.8 E.02985 G1 F18000 G1 X3.498 Y9.008 E.07324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y11.008 ;WIPE_END G1 X9.076 Y16.218 Z22.2 F30000 G1 X33.195 Y38.745 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X33.195 Y40.745 E.06634 G1 X31.45 Y40.745 E.05788 G1 F2400 G1 X30.55 Y40.745 E.02985 G1 F600 G1 X30.35 Y40.745 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X29.25 Y40.745 E.03649 G1 X8.85 Y40.745 E.67671 G1 X7.75 Y40.745 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y40.745 E.00663 M106 S255 G1 F2400 G1 X6.65 Y40.745 E.02985 G1 F18000 G1 X3.905 Y40.745 E.09106 G1 X3.905 Y6.8 E1.12602 G1 F2400 G1 X3.905 Y5.9 E.02985 G1 F600 G1 X3.905 Y5.7 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.905 Y4.6 E.03649 G1 X3.905 Y-8.99 E.45081 G1 X3.905 Y-10.545 E.05158 G1 X4.36 Y-10.545 E.01509 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X5.46 Y-10.545 E.03649 G1 F18000 G1 X6.65 Y-10.545 E.03947 G1 F600 G1 X7.75 Y-10.545 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y-10.545 E.03649 G1 X29.25 Y-10.545 E.67671 G1 X30.35 Y-10.545 E.03649 M73 P49 R54 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.55 Y-10.545 E.00663 M106 S255 G1 F2400 G1 X31.45 Y-10.545 E.02985 G1 F18000 G1 X35.195 Y-10.545 E.12423 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y38.94 E.01936 G1 X32.76 Y39.767 E.02541 G1 X32.76 Y40.31 E.01668 G1 X32.217 Y40.31 E.01668 G1 X31.39 Y40.31 E.02541 G1 F2400 G1 X30.55 Y40.31 E.02581 G1 F600 G1 X30.35 Y40.31 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X29.25 Y40.31 E.03649 G1 X8.85 Y40.31 E.67671 G1 X7.75 Y40.31 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y40.31 E.00615 M106 S255 G1 F2400 G1 X6.71 Y40.31 E.02581 G1 F12000 G1 X4.883 Y40.31 E.05614 G1 X4.34 Y40.31 E.01668 G1 X4.34 Y39.767 E.01668 G1 X4.34 Y6.74 E1.01483 G1 F2400 G1 X4.34 Y5.9 E.02581 G1 F600 G1 X4.34 Y5.7 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X4.34 Y4.6 E.03649 G1 X4.34 Y-8.99 E.45081 G1 X4.34 Y-10.11 E.03715 G1 X4.36 Y-10.11 E.00066 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X5.4 Y-10.11 E.03196 G1 F12000 G1 X6.71 Y-10.11 E.04025 G1 F600 G1 X7.75 Y-10.11 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y-10.11 E.03649 G1 X29.25 Y-10.11 E.67671 G1 X30.35 Y-10.11 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X30.55 Y-10.11 E.00615 M106 S255 G1 F2400 G1 X31.39 Y-10.11 E.02581 G1 F12000 G1 X34.217 Y-10.11 E.08687 G1 X34.76 Y-10.11 E.01668 G1 X34.76 Y-9.567 E.01668 G1 X34.76 Y37.767 E1.45444 G1 X34.76 Y38.31 E.01668 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X33.602 Y39.152 Z22.2 F30000 G1 Z21.8 G1 E.8 F1800 M73 P50 R54 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X35.724 Y31.521 Z22.2 F30000 G1 X36.405 Y-10.855 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X36.405 Y41.055 E1.72195 G1 X36.15 Y41.055 E.00846 G1 X31.45 Y41.055 E.15591 G1 F2400 G1 X30.55 Y41.055 E.02985 G1 F600 G1 X30.35 Y41.055 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X29.25 Y41.055 E.03649 G1 X8.85 Y41.055 E.67671 G1 X7.75 Y41.055 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y41.055 E.00663 M106 S255 G1 F2400 G1 X6.65 Y41.055 E.02985 G1 F18000 G1 X2.95 Y41.055 E.12274 G1 X2.695 Y41.055 E.00846 G1 X2.695 Y40.8 E.00846 G1 X2.695 Y6.8 E1.12784 G1 F2400 G1 X2.695 Y5.9 E.02985 G1 F600 G1 X2.695 Y5.7 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y4.6 E.03649 G1 X2.695 Y-8.09 E.42095 G1 X2.695 Y-10.855 E.09172 G1 X4.36 Y-10.855 E.05523 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X5.46 Y-10.855 E.03649 G1 F18000 G1 X6.65 Y-10.855 E.03947 G1 F600 G1 X7.75 Y-10.855 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y-10.855 E.03649 G1 X29.25 Y-10.855 E.67671 G1 X30.35 Y-10.855 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.55 Y-10.855 E.00663 M106 S255 G1 F2400 G1 X31.45 Y-10.855 E.02985 G1 F18000 G1 X36.11 Y-10.855 E.15458 G1 X36.365 Y-10.855 E.00846 G1 X36.84 Y-11.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X36.84 Y41.49 E1.62178 G1 X36.21 Y41.49 E.01936 G1 X31.39 Y41.49 E.14811 G1 F2400 G1 X30.55 Y41.49 E.02581 G1 F600 G1 X30.35 Y41.49 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X29.25 Y41.49 E.03649 G1 X8.85 Y41.49 E.67671 G1 X7.75 Y41.49 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y41.49 E.00615 M106 S255 G1 F2400 G1 X6.71 Y41.49 E.02581 G1 F12000 G1 X2.89 Y41.49 E.11738 G1 X2.26 Y41.49 E.01936 G1 X2.26 Y40.86 E.01936 G1 X2.26 Y6.74 E1.04841 G1 F2400 G1 X2.26 Y5.9 E.02581 G1 F600 G1 X2.26 Y5.7 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y4.6 E.03649 G1 X2.26 Y-8.09 E.42095 G1 X2.26 Y-11.29 E.10615 G1 X3.26 Y-11.29 E.03317 G1 X4.36 Y-11.29 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X5.4 Y-11.29 E.03196 G1 F12000 G1 X6.71 Y-11.29 E.04025 G1 F600 G1 X7.75 Y-11.29 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y-11.29 E.03649 G1 X29.25 Y-11.29 E.67671 G1 X30.35 Y-11.29 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X30.55 Y-11.29 E.00615 M106 S255 G1 F2400 G1 X31.39 Y-11.29 E.02581 G1 F12000 G1 X36.17 Y-11.29 E.14688 G1 X36.8 Y-11.29 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X36.802 Y-9.29 ;WIPE_END G1 X36.363 Y-1.67 Z22.2 F30000 G1 X33.994 Y39.544 Z22.2 G1 Z21.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:22 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;22 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;22 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22.4 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14601 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14601 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z22.4 F30000 G1 Z22 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X74.313 Y13.829 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F14601 G1 X74.313 Y15.237 E.0467 G1 X74.534 Y15.237 E.00731 G1 X75.153 Y14.608 E.02928 G1 X75.809 Y14.303 E.02399 G1 X76.387 Y14.285 E.01919 G1 X76.387 Y11.952 E.07738 G2 X75.153 Y11.662 I-.954 J1.289 E.04321 G2 X74.313 Y12.256 I.729 J1.922 E.03451 G1 X74.313 Y10.188 E.06859 G2 X75.153 Y9.367 I-4.139 J-5.076 E.03902 G1 X75.809 Y9.061 E.02399 G1 X76.387 Y9.043 E.01919 G1 X76.387 Y7.763 E.04247 G1 X76.039 Y7.763 E.01155 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X76.387 Y7.763 G1 X76.387 Y9.043 G1 X76.015 Y9.055 ;WIPE_END G1 X69.882 Y4.513 Z22.4 F30000 G1 X7.002 Y-42.052 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F14601 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14601 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X8.58 Y-35.961 Z22.4 F30000 G1 X33.195 Y38.745 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14601 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X28.909 Y33.72 Z22.4 F30000 G1 X3.102 Y-10.448 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14601 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.408 E1.69362 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y-10.448 G1 X3.498 Y-8.846 ;WIPE_END G17 G3 Z22.4 I-1.031 J.647 P1 F30000 G1 X33.602 Y39.152 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14601 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X31.406 Y32.776 Z22.4 F30000 G1 X2.695 Y-10.855 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14601 G1 X36.405 Y-10.855 E1.11822 G1 X36.405 Y41.055 E1.72195 G1 X2.695 Y41.055 E1.11822 G1 X2.695 Y-10.815 E1.72062 G1 X2.26 Y-11.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X36.84 Y-11.29 E1.06255 G1 X36.84 Y41.49 E1.62178 G1 X2.26 Y41.49 E1.06255 G1 X2.26 Y-11.25 E1.62055 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.26 Y-11.252 ;WIPE_END G17 G3 Z22.4 I-1.05 J.615 P1 F30000 G1 X33.994 Y39.544 Z22.4 G1 Z22 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F14601 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F14601 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:22.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;22.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22.6 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z22.6 F30000 G1 Z22.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F13184.75 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F14822 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F14822 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z22.6 F30000 G1 X7.002 Y-42.052 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X8.58 Y-35.961 Z22.6 F30000 G1 X33.195 Y38.745 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X28.948 Y33.697 Z22.6 F30000 G1 X3.498 Y-10.448 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.459 Y-8.448 ;WIPE_END G1 X7.543 Y-2 Z22.6 F30000 G1 X33.602 Y39.152 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X35.724 Y31.521 Z22.6 F30000 G1 X36.405 Y-10.855 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X36.405 Y41.055 E1.72195 G1 X2.695 Y41.055 E1.11822 G1 X2.695 Y-10.855 E1.72195 G1 X36.365 Y-10.855 E1.1169 G1 X36.84 Y-11.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X36.84 Y41.49 E1.62178 G1 X2.26 Y41.49 E1.06255 G1 X2.26 Y-11.29 E1.62178 G1 X36.8 Y-11.29 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X36.802 Y-9.29 ;WIPE_END G1 X36.363 Y-1.67 Z22.6 F30000 G1 X33.994 Y39.544 Z22.6 G1 Z22.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F14822 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F14822 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:22.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;22.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z22.8 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z22.8 F30000 G1 Z22.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F13184.75 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F14822 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F14822 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z22.8 F30000 G1 X7.002 Y-42.052 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X8.58 Y-35.961 Z22.8 F30000 G1 X33.195 Y38.745 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X28.948 Y33.697 Z22.8 F30000 G1 X3.498 Y-10.448 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F14822 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.459 Y-8.448 ;WIPE_END G1 X7.543 Y-2 Z22.8 F30000 G1 X33.602 Y39.152 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X35.724 Y31.521 Z22.8 F30000 G1 X36.405 Y-10.855 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F14822 G1 X36.405 Y41.055 E1.72195 G1 X2.695 Y41.055 E1.11822 G1 X2.695 Y-10.855 E1.72195 G1 X36.365 Y-10.855 E1.1169 G1 X36.84 Y-11.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X36.84 Y41.49 E1.62178 G1 X2.26 Y41.49 E1.06255 G1 X2.26 Y-11.29 E1.62178 G1 X36.8 Y-11.29 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X36.802 Y-9.29 ;WIPE_END G1 X36.363 Y-1.67 Z22.8 F30000 G1 X33.994 Y39.544 Z22.8 G1 Z22.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F14822 G1 X33.994 Y40.256 E.02187 G1 X35.606 Y40.256 E.04952 G1 X35.606 Y39.544 E.02187 G1 X34.034 Y39.544 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F14822 G1 X35.21 Y39.9 E.02345 ;LAYER_CHANGE ;Z:22.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;22.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X34.35 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z23 I.636 J1.037 P1 F30000 G1 X74.198 Y15.448 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16484 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16484 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z23 F30000 G1 Z22.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F12000 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F13184.75 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F15000 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F15000 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z23 F30000 G1 X7.002 Y-42.052 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16484 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16484 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X8.58 Y-35.961 Z23 F30000 G1 X33.195 Y38.745 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16484 G1 X33.195 Y40.745 E.06634 G1 X3.905 Y40.745 E.9716 G1 X3.905 Y-10.545 E1.70138 G1 X35.195 Y-10.545 E1.03795 G1 X35.195 Y38.745 E1.63504 G1 X33.235 Y38.745 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y40.31 E.06145 G1 X4.34 Y40.31 E.87327 G1 X4.34 Y-10.11 E1.54927 G1 X34.76 Y-10.11 E.93472 G1 X34.76 Y38.31 E1.48781 G1 X32.8 Y38.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.76 Y40.31 ;WIPE_END G1 X28.948 Y33.697 Z23 F30000 G1 X3.498 Y-10.448 Z23 G1 Z22.6 M73 P50 R53 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F16484 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.459 Y-8.448 ;WIPE_END G1 X7.543 Y-2 Z23 F30000 G1 X33.602 Y39.152 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16484 G1 X35.602 Y39.152 E.06634 G1 X35.602 Y-10.448 E1.64532 G1 X35.998 Y-10.448 E.01313 G1 X35.998 Y40.648 E1.69494 G1 X33.602 Y40.648 E.07947 G1 X33.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X35.602 Y39.152 ;WIPE_END G1 X35.724 Y31.521 Z23 F30000 G1 X36.405 Y-10.855 Z23 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F16484 G1 X36.405 Y41.055 E1.72195 G1 X2.695 Y41.055 E1.11822 G1 X2.695 Y-10.855 E1.72195 G1 X36.365 Y-10.855 E1.1169 G1 X36.84 Y-11.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X36.84 Y41.49 E1.62178 G1 X2.26 Y41.49 E1.06255 G1 X2.26 Y-11.29 E1.62178 G1 X36.8 Y-11.29 E1.06132 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X36.802 Y-9.29 ;WIPE_END G1 X35.628 Y-10 Z23 F30000 G1 Z22.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.420951 G1 F12000 G1 X35.972 Y-9.657 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-9.123 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-9.466 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-8.931 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-8.588 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-8.053 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-8.397 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-7.862 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-7.519 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-6.984 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-7.327 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-6.793 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-6.45 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-5.915 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-6.258 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-5.724 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-5.38 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-4.846 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-5.189 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-4.654 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-4.311 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-3.777 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-4.12 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-3.585 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-3.242 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-2.707 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-3.05 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-2.516 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-2.173 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-1.638 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-1.981 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-1.447 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-1.103 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y-.569 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y-.912 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y-.377 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y-.034 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y.5 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y.157 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y.692 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y1.035 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y1.57 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y1.227 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y1.761 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y2.104 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y2.639 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y2.296 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y2.83 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y3.174 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y3.708 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y3.365 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y3.9 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y4.243 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y4.777 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y4.434 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y4.969 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y5.312 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y5.847 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y5.503 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y6.038 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y6.381 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y6.916 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y6.573 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y7.107 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y7.45 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y7.985 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y7.642 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y8.177 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y8.52 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y9.054 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y8.711 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y9.246 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y9.589 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y10.124 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y9.78 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y10.315 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y10.658 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y11.193 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y10.85 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y11.384 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y11.727 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y12.262 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y11.919 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y12.453 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y12.797 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y13.331 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y12.988 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y13.523 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y13.866 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y14.4 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y14.057 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y14.592 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y14.935 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y15.47 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y15.127 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y15.661 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y16.004 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y16.539 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y16.196 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y16.73 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y17.074 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y17.608 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y17.265 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y17.8 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y18.143 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y18.677 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y18.334 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y18.869 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y19.212 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y19.747 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y19.403 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y19.938 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y20.281 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y20.816 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y20.473 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y21.007 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y21.35 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y21.885 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y21.542 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y22.077 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y22.42 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y22.954 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y22.611 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y23.146 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y23.489 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y24.024 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y23.68 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y24.215 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y24.558 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y25.093 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y24.75 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y25.284 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y25.627 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y26.162 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y25.819 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y26.353 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y26.697 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y27.231 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y26.888 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y27.423 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y27.766 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y28.3 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y27.957 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y28.492 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y28.835 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y29.37 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y29.027 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y29.561 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y29.904 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y30.439 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y30.096 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y30.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y30.974 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y31.508 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y31.165 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y31.7 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y32.043 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y32.577 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y32.234 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y32.769 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y33.112 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y33.647 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y33.303 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y33.838 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y34.181 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y34.716 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y34.373 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y34.907 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y35.251 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y35.785 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y35.442 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y35.977 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y36.32 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y36.854 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y36.511 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y37.046 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y37.389 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y37.924 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y37.58 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.628 Y38.115 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y38.458 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y38.993 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.628 Y38.65 E.01495 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.623 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y39.527 E.0152 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.972 Y40.062 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.088 Y39.178 E.0385 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.553 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X35.972 Y40.597 E.06179 SET_VELOCITY_LIMIT ACCEL=10000 G1 X35.462 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X34.019 Y39.178 E.06287 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.628 Y39.323 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X34.927 Y40.622 E.05658 SET_VELOCITY_LIMIT ACCEL=10000 G1 X34.393 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X33.628 Y39.857 E.03329 ;LAYER_CHANGE ;Z:22.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;22.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X34.393 Y40.622 ;WIPE_END ;AFTER_LAYER_CHANGE ;22.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z23.2 I.65 J1.029 P1 F30000 G1 X74.198 Y15.448 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8503 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8503 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8503 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z23.2 F30000 G1 Z22.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8503 G1 X74.15 Y17.651 E.08196 G1 X75.35 Y14.2 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.623368 G1 F8503 G1 X75.35 Y8.84 E.25352 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.829 Y14.679 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F8503 G1 X75.829 Y8.321 E.19535 G1 X74.871 Y8.321 E.02942 G1 X74.871 Y14.679 E.19535 G1 X75.789 Y14.679 E.02819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.206 Y15.056 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F8503 G1 X76.206 Y7.944 E.21852 G1 X74.494 Y7.944 E.0526 G1 X74.494 Y15.056 E.21852 G1 X76.166 Y15.056 E.05137 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X74.494 Y15.056 G1 X74.494 Y14.728 ;WIPE_END G1 X68.654 Y9.814 Z23.2 F30000 G1 X7.002 Y-42.052 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8503 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8503 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8503 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.94 Y-35.582 Z23.2 F30000 G1 X3.498 Y38.31 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8503 G1 X3.498 Y40.648 E.07755 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.27 E1.61606 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y40.27 ;WIPE_END G1 X11.12 Y39.879 Z23.2 F30000 G1 X33.195 Y38.745 Z23.2 G1 Z22.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8503 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y40.745 E1.70138 M73 P51 R53 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8503 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y38.949 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F8503 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:23 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;23 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;23 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z23.4 I.609 J1.054 P1 F30000 G1 X74.198 Y15.448 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8788 G1 X74.102 Y15.448 E.00318 G1 X74.102 Y7.552 E.26192 G1 X76.598 Y7.552 E.08279 G1 X76.598 Y15.448 E.26192 G1 X74.238 Y15.448 E.07829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.605 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8788 G1 X74.605 Y17.855 E.06634 G1 X73.695 Y17.855 E.03019 G1 X73.695 Y7.145 E.35527 G1 X77.005 Y7.145 E.1098 G1 X77.005 Y15.855 E.28893 G1 X74.645 Y15.855 E.07829 G1 X75.04 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8788 G1 X75.04 Y18.29 E.06145 G1 X73.26 Y18.29 E.05469 G1 X73.26 Y6.71 E.35582 G1 X77.44 Y6.71 E.12844 G1 X77.44 Y16.29 E.29437 G1 X75.08 Y16.29 E.07252 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.04 Y18.29 ;WIPE_END G1 X74.15 Y15.651 Z23.4 F30000 G1 Z23 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.545838 G1 F8788 G1 X74.15 Y17.651 E.08196 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.15 Y15.651 ;WIPE_END G1 X75.671 Y8.172 Z23.4 F30000 G1 X75.791 Y7.578 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.428543 G1 F8788 G1 X76.572 Y8.359 E.03468 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y8.904 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X75.246 Y7.578 E.05892 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.7 Y7.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X76.572 Y9.45 E.08315 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y9.995 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.155 Y7.578 E.10739 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y8.097 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X76.572 Y10.54 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y11.086 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.128 Y8.642 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y9.188 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X76.572 Y11.631 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y12.176 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.128 Y9.733 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y10.278 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X76.572 Y12.722 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y13.267 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.128 Y10.824 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y11.369 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X76.572 Y13.812 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.572 Y14.358 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.128 Y11.915 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y12.46 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X76.572 Y14.903 E.10857 SET_VELOCITY_LIMIT ACCEL=10000 G1 X76.545 Y15.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.128 Y13.005 E.10738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y13.551 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X75.999 Y15.422 E.08314 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.454 Y15.422 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.128 Y14.096 E.05891 SET_VELOCITY_LIMIT ACCEL=10000 G1 X74.128 Y14.641 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F8788 G1 X74.909 Y15.422 E.03467 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X74.128 Y14.641 ;WIPE_END G1 X68.297 Y9.717 Z23.4 F30000 G1 X7.002 Y-42.052 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8788 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8788 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8788 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.94 Y-35.582 Z23.4 F30000 G1 X3.498 Y38.31 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8788 G1 X3.498 Y40.648 E.07755 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.27 E1.61606 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y40.27 ;WIPE_END G1 X11.12 Y39.879 Z23.4 F30000 G1 X33.195 Y38.745 Z23.4 G1 Z23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8788 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8788 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y38.949 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F8788 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:23.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;23.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z23.6 I.586 J1.066 P1 F30000 G1 X76.302 Y15.448 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z23.6 F30000 G1 X7.002 Y-42.052 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.94 Y-35.582 Z23.6 F30000 G1 X3.498 Y38.31 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X3.498 Y40.648 E.07755 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.27 E1.61606 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y40.27 ;WIPE_END G1 X11.12 Y39.879 Z23.6 F30000 G1 X33.195 Y38.745 Z23.6 G1 Z23.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y38.949 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F7672 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:23.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;23.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z23.8 I.586 J1.066 P1 F30000 G1 X76.302 Y15.448 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z23.8 F30000 G1 X7.002 Y-42.052 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.94 Y-35.582 Z23.8 F30000 G1 X3.498 Y38.31 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X3.498 Y40.648 E.07755 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.27 E1.61606 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y40.27 ;WIPE_END G1 X11.12 Y39.879 Z23.8 F30000 G1 X33.195 Y38.745 Z23.8 G1 Z23.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y38.949 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F7672 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:23.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;23.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z24 I.586 J1.066 P1 F30000 G1 X76.302 Y15.448 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z24 F30000 G1 X7.002 Y-42.052 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.94 Y-35.582 Z24 F30000 G1 X3.498 Y38.31 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7672 G1 X3.498 Y40.648 E.07755 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.27 E1.61606 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y40.27 ;WIPE_END G1 X11.12 Y39.879 Z24 F30000 G1 X33.195 Y38.745 Z24 G1 Z23.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7672 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.785 E.06502 G1 X32.76 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7672 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.35 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y38.949 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F7672 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:23.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;23.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;23.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z24.2 I.586 J1.066 P1 F30000 G1 X76.302 Y15.448 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z24.2 F30000 G1 X7.002 Y-42.052 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z24.2 F30000 G1 X3.498 Y39.152 Z24.2 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2400 G1 X4.55 Y39.152 E.0349 G1 F600 G1 X4.75 Y39.152 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X5.85 Y39.152 E.03649 G1 X31.25 Y39.152 E.84256 G1 X32.35 Y39.152 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X32.55 Y39.152 E.00663 M106 S255 G1 F2400 G1 X33.498 Y39.152 E.03145 G1 F18000 G1 X33.498 Y40.648 E.04963 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69495 G1 X3.498 Y-10.448 E.01314 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2400 G1 X4.55 Y38.745 E.0214 G1 F600 G1 X4.75 Y38.745 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X5.85 Y38.745 E.03649 G1 X31.25 Y38.745 E.84256 G1 X32.35 Y38.745 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X32.55 Y38.745 E.00663 M106 S255 G1 F2400 G1 X33.905 Y38.745 E.04495 G1 F18000 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2400 G1 X4.55 Y38.31 E.00645 G1 F600 G1 X4.75 Y38.31 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X5.85 Y38.31 E.03649 G1 X31.25 Y38.31 E.84256 M73 P51 R52 G1 X32.35 Y38.31 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X32.55 Y38.31 E.00615 M106 S255 G1 F2400 G1 X34.34 Y38.31 E.055 G1 F12000 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.883 Y-10.11 E.88577 G1 X4.34 Y-10.11 E.01668 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y37.64 E1.45054 G1 X4.34 Y38.27 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.75 Y38.31 G1 X6.338 Y38.31 ;WIPE_END G1 X3.128 Y38.707 Z24.2 F30000 G1 Z23.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X3.302 Y38.707 E.00533 G1 X3.298 Y39.461 E.02317 G1 X33.302 Y39.461 E.92193 G1 X33.302 Y39.838 E.01159 G1 X3.298 Y39.838 E.92193 G1 X3.298 Y40.215 E.01159 G1 X33.472 Y40.215 E.92715 ;LAYER_CHANGE ;Z:24 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;24 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X31.472 Y40.215 ;WIPE_END ;AFTER_LAYER_CHANGE ;24 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24.4 I.588 J1.065 P1 F30000 G1 X76.302 Y15.448 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9386 M106 S255 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9386 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9386 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z24.4 F30000 G1 X7.002 Y-42.052 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9386 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9386 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9386 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z24.4 F30000 G1 X3.498 Y39.152 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9386 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9386 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9386 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G17 G3 Z24.4 I-.058 J1.216 P1 F30000 G1 X33.106 Y39.544 Z24.4 G1 Z24 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F9386 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F9386 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:24.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;24.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24.6 I.575 J1.072 P1 F30000 G1 X76.302 Y15.448 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9359 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9359 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9359 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z24.6 F30000 G1 X7.002 Y-42.052 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9359 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9359 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9359 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z24.6 F30000 G1 X3.498 Y39.152 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9359 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 M73 P52 R52 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9359 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9359 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.964 Y38.635 Z24.6 F30000 G1 X33.106 Y39.544 Z24.6 G1 Z24.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F9359 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F9359 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:24.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;24.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z24.8 I.575 J1.072 P1 F30000 G1 X76.302 Y15.448 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8939 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8939 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8939 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z24.8 F30000 G1 X7.002 Y-42.052 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8939 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8939 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8939 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z24.8 F30000 G1 X3.498 Y39.152 Z24.8 G1 Z24.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8939 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8939 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8939 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.49 Y40.437 Z24.8 F30000 G1 Z24.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8939 G1 X3.861 Y40.437 E.05401 G3 X4.341 Y40.287 I.367 J.333 E.0175 G3 X4.489 Y40.402 I-.022 J.182 E.00651 G1 X5.972 Y40.402 E.04919 G1 X32.437 Y39.566 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.46413 G1 F8939 G1 X4.663 Y39.566 E.95332 G1 X4.663 Y39.987 E.01446 G1 X32.437 Y39.987 E.95332 G1 X32.437 Y39.606 E.01308 ;LAYER_CHANGE ;Z:24.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;24.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X32.437 Y39.987 G1 X30.819 Y39.987 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25 I.578 J1.071 P1 F30000 G1 X76.302 Y15.448 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z25 F30000 G1 X7.002 Y-42.052 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z25 F30000 G1 X3.498 Y39.152 Z25 G1 Z24.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:24.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;24.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END ;AFTER_LAYER_CHANGE ;24.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.2 I.377 J1.157 P1 F30000 G1 X76.302 Y15.448 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z25.2 F30000 G1 X7.002 Y-42.052 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z25.2 F30000 G1 X3.498 Y39.152 Z25.2 G1 Z24.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:25 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;25 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END ;AFTER_LAYER_CHANGE ;25 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.4 I.377 J1.157 P1 F30000 G1 X76.302 Y15.448 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z25.4 F30000 G1 X7.002 Y-42.052 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z25.4 F30000 G1 X3.498 Y39.152 Z25.4 G1 Z25 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:25.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;25.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.6 I.377 J1.157 P1 F30000 G1 X76.302 Y15.448 Z25.6 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z25.6 F30000 G1 X7.002 Y-42.052 Z25.6 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z25.6 F30000 G1 X3.498 Y39.152 Z25.6 G1 Z25.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8072 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 M73 P52 R51 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8072 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8072 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:25.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;25.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z25.8 I.377 J1.157 P1 F30000 G1 X76.302 Y15.448 Z25.8 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8846 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8846 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8846 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z25.8 F30000 G1 X7.002 Y-42.052 Z25.8 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8846 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8846 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8846 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z25.8 F30000 G1 X3.498 Y39.152 Z25.8 G1 Z25.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8846 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8846 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8846 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X4.897 Y39.363 Z25.8 F30000 G1 Z25.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8846 G1 X6.525 Y39.363 E.05401 G2 X7.387 Y39.363 I.431 J-.787 E.02982 G1 X11.767 Y39.363 E.14528 G2 X12.628 Y39.363 I.431 J-.787 E.02982 G1 X17.008 Y39.363 E.14528 G2 X17.87 Y39.363 I.431 J-.787 E.02982 G1 X22.249 Y39.363 E.14528 G2 X23.111 Y39.363 I.431 J-.787 E.02982 G1 X27.49 Y39.363 E.14528 G2 X28.352 Y39.363 I.431 J-.787 E.02982 G1 X32.732 Y39.363 E.14528 G2 X33.287 Y39.444 I.375 J-.627 E.0191 G1 X33.287 Y40.437 E.03294 G1 X32.357 Y40.437 E.03083 G2 X31.858 Y40.279 I-.381 J.336 E.01824 G1 X31.259 Y40.437 E.02057 G1 X27.116 Y40.437 E.13742 G2 X26.617 Y40.279 I-.381 J.336 E.01824 G1 X26.017 Y40.437 E.02057 G1 X21.875 Y40.437 E.13742 G2 X21.376 Y40.279 I-.381 J.336 E.01824 G1 X20.776 Y40.437 E.02057 G1 X16.633 Y40.437 E.13742 G2 X16.134 Y40.279 I-.381 J.336 E.01824 G1 X15.535 Y40.437 E.02057 G1 X11.392 Y40.437 E.13742 G2 X10.893 Y40.279 I-.381 J.336 E.01824 G1 X10.293 Y40.437 E.02057 G1 X6.151 Y40.437 E.13742 G2 X5.652 Y40.279 I-.381 J.336 E.01824 G1 X5.052 Y40.437 E.02057 G1 X3.424 Y40.437 E.05401 ;LAYER_CHANGE ;Z:25.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;25.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X5.052 Y40.437 G1 X5.412 Y40.342 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z26 I.403 J1.148 P1 F30000 G1 X76.302 Y15.448 Z26 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8740 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8740 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8740 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z26 F30000 G1 X7.002 Y-42.052 Z26 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8740 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8740 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8740 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z26 F30000 G1 X3.498 Y39.152 Z26 G1 Z25.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8740 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8740 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8740 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y40.423 Z26 F30000 G1 Z25.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8740 G1 X4.928 Y40.437 E.05356 G1 X5.911 Y39.877 E.03755 G2 X6.047 Y39.363 I-.291 J-.352 E.01882 G1 X7.605 Y39.363 E.0517 G1 X6.702 Y39.877 E.03446 G2 X6.574 Y40.437 I.327 J.369 E.02034 G1 X10.169 Y40.437 E.11924 G1 X11.153 Y39.877 E.03755 G2 X11.288 Y39.363 I-.291 J-.352 E.01882 G1 X12.847 Y39.363 E.0517 G1 X11.944 Y39.877 E.03446 G2 X11.816 Y40.437 I.327 J.369 E.02034 G1 X15.41 Y40.437 E.11924 G1 X16.394 Y39.877 E.03755 G2 X16.529 Y39.363 I-.291 J-.352 E.01882 G1 X18.088 Y39.363 E.0517 G1 X17.185 Y39.877 E.03446 G2 X17.057 Y40.437 I.327 J.369 E.02034 G1 X20.652 Y40.437 E.11924 G1 X21.635 Y39.877 E.03755 G2 X21.771 Y39.363 I-.291 J-.352 E.01882 G1 X23.329 Y39.363 E.0517 G1 X22.426 Y39.877 E.03446 G2 X22.298 Y40.437 I.327 J.369 E.02034 G1 X25.893 Y40.437 E.11924 G1 X26.877 Y39.877 E.03755 G2 X27.012 Y39.363 I-.291 J-.352 E.01882 G1 X28.571 Y39.363 E.0517 G1 X27.668 Y39.877 E.03446 G2 X27.539 Y40.437 I.327 J.369 E.02034 G1 X31.134 Y40.437 E.11924 G1 X32.118 Y39.877 E.03755 G2 X32.253 Y39.363 I-.291 J-.352 E.01882 G1 X33.287 Y39.363 E.03428 G1 X33.287 Y39.662 E.00991 G2 X32.781 Y40.437 I.149 J.65 E.03393 G1 X31.338 Y40.437 E.04787 ;LAYER_CHANGE ;Z:25.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;25.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X32.781 Y40.437 G1 X32.744 Y40.205 G1 X32.889 Y39.917 ;WIPE_END ;AFTER_LAYER_CHANGE ;25.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z26.2 I.598 J1.06 P1 F30000 G1 X76.302 Y15.448 Z26.2 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8721 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8721 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8721 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z26.2 F30000 G1 X7.002 Y-42.052 Z26.2 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8721 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8721 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8721 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z26.2 F30000 G1 X3.498 Y39.152 Z26.2 G1 Z25.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8721 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8721 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 M73 P53 R51 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8721 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y40.29 Z26.2 F30000 G1 Z25.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8721 G1 X3.313 Y40.437 E.00486 G1 X4.795 Y40.437 E.04915 G1 X5.463 Y39.877 E.0289 G2 X5.772 Y39.363 I-.398 J-.59 E.02055 G1 X7.764 Y39.363 E.06607 G1 X7.151 Y39.877 E.02653 G2 X6.83 Y40.437 I.441 J.625 E.0221 G1 X10.036 Y40.437 E.10635 G1 X10.704 Y39.877 E.0289 G2 X11.014 Y39.363 I-.398 J-.59 E.02055 G1 X13.005 Y39.363 E.06607 G1 X12.393 Y39.877 E.02653 G2 X12.071 Y40.437 I.441 J.625 E.0221 G1 X15.278 Y40.437 E.10635 G1 X15.945 Y39.877 E.0289 G2 X16.255 Y39.363 I-.398 J-.59 E.02055 G1 X18.247 Y39.363 E.06607 G1 X17.634 Y39.877 E.02653 G2 X17.313 Y40.437 I.441 J.625 E.0221 G1 X20.519 Y40.437 E.10635 G1 X21.186 Y39.877 E.0289 G2 X21.496 Y39.363 I-.398 J-.59 E.02055 G1 X23.488 Y39.363 E.06607 G1 X22.875 Y39.877 E.02653 G2 X22.554 Y40.437 I.441 J.625 E.0221 G1 X25.76 Y40.437 E.10635 G1 X26.428 Y39.877 E.0289 G2 X26.738 Y39.363 I-.398 J-.59 E.02055 G1 X28.729 Y39.363 E.06607 G1 X28.117 Y39.877 E.02653 G2 X27.795 Y40.437 I.441 J.625 E.0221 G1 X31.001 Y40.437 E.10635 G1 X31.669 Y39.877 E.0289 G2 X31.979 Y39.363 I-.398 J-.59 E.02055 G1 X33.287 Y39.363 E.04339 G1 X33.287 Y39.965 E.01997 G2 X33.037 Y40.437 I.382 J.505 E.01829 G1 X31.408 Y40.437 E.05401 ;LAYER_CHANGE ;Z:26 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;26 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.037 Y40.437 G1 X33.094 Y40.205 G1 X33.177 Y40.101 ;WIPE_END ;AFTER_LAYER_CHANGE ;26 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z26.4 I.604 J1.057 P1 F30000 G1 X76.302 Y15.448 Z26.4 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8685 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8685 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8685 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z26.4 F30000 G1 X7.002 Y-42.052 Z26.4 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8685 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8685 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8685 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z26.4 F30000 G1 X3.498 Y39.152 Z26.4 G1 Z26 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8685 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8685 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8685 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y40.177 Z26.4 F30000 G1 Z26 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8685 G1 X3.313 Y40.437 E.00862 G1 X4.682 Y40.437 E.0454 G2 X5.578 Y39.363 I-2.654 J-3.128 E.04663 G1 X7.889 Y39.363 E.07664 G2 X7.014 Y40.437 I2.411 J2.856 E.0462 G1 X9.923 Y40.437 E.09648 G2 X10.82 Y39.363 I-2.654 J-3.128 E.04663 G1 X13.13 Y39.363 E.07664 G2 X12.256 Y40.437 I2.411 J2.856 E.0462 G1 X15.164 Y40.437 E.09648 G2 X16.061 Y39.363 I-2.654 J-3.128 E.04663 G1 X18.371 Y39.363 E.07664 G2 X17.497 Y40.437 I2.411 J2.856 E.0462 G1 X20.406 Y40.437 E.09648 G2 X21.302 Y39.363 I-2.654 J-3.128 E.04663 G1 X23.613 Y39.363 E.07664 G2 X22.738 Y40.437 I2.41 J2.856 E.0462 G1 X25.647 Y40.437 E.09648 G2 X26.544 Y39.363 I-2.654 J-3.128 E.04663 G1 X28.854 Y39.363 E.07664 G2 X27.98 Y40.437 I2.41 J2.856 E.0462 G1 X30.888 Y40.437 E.09648 G2 X31.785 Y39.363 I-2.654 J-3.128 E.04663 G1 X33.287 Y39.363 E.04982 G1 X33.287 Y39.489 E.00419 ;LAYER_CHANGE ;Z:26.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;26.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.287 Y39.363 G1 X31.785 Y39.363 G1 X31.699 Y39.549 G1 X31.587 Y39.672 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z26.6 I.58 J1.07 P1 F30000 G1 X76.302 Y15.448 Z26.6 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F8948 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8948 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8948 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z26.6 F30000 G1 X7.002 Y-42.052 Z26.6 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8948 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8948 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8948 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z26.6 F30000 G1 X3.498 Y39.152 Z26.6 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8948 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8948 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8948 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X9.46 Y39.544 Z26.6 F30000 G1 Z26.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8948 G1 X3.494 Y39.544 E.1833 G1 X3.494 Y40.256 E.02187 G1 X9.456 Y40.256 E.18318 G1 X9.459 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8948 G1 X9.064 Y39.9 E.14216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.387 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8948 G1 X9.829 Y40.437 E.05168 G3 X10.645 Y39.363 I75.673 J56.645 E.04473 G1 X13.257 Y39.363 E.08664 G2 X12.416 Y40.437 I102.507 J81.179 E.04525 G1 X15.045 Y40.437 E.08721 G2 X15.886 Y39.363 I-102.543 J-81.246 E.04526 G1 X18.498 Y39.363 E.08664 G2 X17.657 Y40.437 I102.53 J81.198 E.04525 G1 X20.286 Y40.437 E.08721 G2 X21.128 Y39.363 I-102.519 J-81.227 E.04526 G1 X23.74 Y39.363 E.08664 G2 X22.898 Y40.437 I102.53 J81.198 E.04525 G1 X25.527 Y40.437 E.08721 G2 X26.369 Y39.363 I-102.519 J-81.227 E.04526 G1 X26.771 Y39.363 E.01333 G1 X26.771 Y40.437 E.03562 G1 X26.637 Y40.437 E.00445 G1 X27.144 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8948 G1 X27.14 Y40.256 E.02187 G1 X33.106 Y40.256 E.1833 G1 X33.106 Y39.544 E.02187 G1 X27.184 Y39.544 E.18196 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.496 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8948 G1 X32.71 Y39.9 E.14216 ;LAYER_CHANGE ;Z:26.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;26.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z26.8 I.575 J1.072 P1 F30000 G1 X76.302 Y15.448 Z26.8 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8977 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8977 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8977 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z26.8 F30000 G1 X7.002 Y-42.052 Z26.8 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8977 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8977 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8977 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z26.8 F30000 G1 X3.498 Y39.152 Z26.8 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F8977 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F8977 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F8977 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z26.8 F30000 G1 Z26.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8977 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F8977 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.908 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F8977 G1 X12.536 Y40.437 E.05401 G2 X13.429 Y39.363 I-2.854 J-3.283 E.04653 G1 X15.759 Y39.363 E.07727 G2 X14.887 Y40.437 I2.584 J2.989 E.04612 G1 X17.777 Y40.437 E.09589 G2 X18.671 Y39.363 I-2.854 J-3.283 E.04653 G1 X21 Y39.363 E.07727 G2 X20.128 Y40.437 I2.584 J2.989 E.04612 G1 X21.756 Y40.437 E.05401 G1 X22.284 Y39.363 F30000 G1 F8977 G1 X23.912 Y39.363 E.05401 G3 X23.019 Y40.437 I-3.748 J-2.209 E.04653 G1 X25.369 Y40.437 E.07798 G3 X25.708 Y39.941 I1.049 J.351 E.02017 G1 X25.708 Y39.363 E.01916 G1 X24.657 Y39.363 E.03486 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F8977 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F8977 G1 X32.71 Y39.9 E.17054 ;LAYER_CHANGE ;Z:26.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;26.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27 I.575 J1.072 P1 F30000 G1 X76.302 Y15.448 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9996 G1 X76.302 Y7.552 E.26192 G1 X76.598 Y7.552 E.00981 G1 X76.598 Y15.448 E.26192 G1 X76.342 Y15.448 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X75.895 Y15.855 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9996 G1 X75.895 Y7.145 E.28893 G1 X77.005 Y7.145 E.03682 G1 X77.005 Y15.855 E.28893 G1 X75.935 Y15.855 E.03549 G1 X75.46 Y16.29 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9996 G1 X75.46 Y6.71 E.29437 G1 X77.44 Y6.71 E.06084 G1 X77.44 Y16.29 E.29437 G1 X75.5 Y16.29 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X75.492 Y14.29 ;WIPE_END G1 X69.597 Y9.441 Z27 F30000 G1 X7.002 Y-42.052 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9996 G1 X7.002 Y-49.948 E.26192 G1 X7.298 Y-49.948 E.00981 G1 X7.298 Y-42.052 E.26192 G1 X7.042 Y-42.052 E.00849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.595 Y-41.645 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9996 G1 X6.595 Y-50.355 E.28893 G1 X7.705 Y-50.355 E.03682 G1 X7.705 Y-41.645 E.28893 G1 X6.635 Y-41.645 E.03549 G1 X6.16 Y-41.21 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9996 G1 X6.16 Y-50.79 E.29437 G1 X8.14 Y-50.79 E.06084 G1 X8.14 Y-41.21 E.29437 G1 X6.2 Y-41.21 E.05961 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.192 Y-43.21 ;WIPE_END G1 X5.942 Y-35.582 Z27 F30000 G1 X3.498 Y39.152 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9996 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9996 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9996 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 M73 P53 R50 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z27 F30000 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F9996 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F9996 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.021 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F9996 G1 X12.649 Y40.437 E.05401 G1 X13.305 Y39.877 E.0286 G2 X13.62 Y39.363 I-.414 J-.607 E.0206 G1 X15.635 Y39.363 E.06683 G1 X15.033 Y39.877 E.02625 G2 X14.706 Y40.437 I.459 J.643 E.02216 G1 X17.891 Y40.437 E.10565 G1 X18.546 Y39.877 E.0286 G2 X18.861 Y39.363 I-.414 J-.607 E.0206 G1 X20.876 Y39.363 E.06683 G1 X20.274 Y39.877 E.02625 G2 X19.947 Y40.437 I.459 J.643 E.02216 G1 X23.132 Y40.437 E.10565 G1 X23.788 Y39.877 E.0286 G2 X24.102 Y39.363 I-.414 J-.607 E.0206 G1 X25.708 Y39.363 E.05325 G1 X25.708 Y39.713 E.0116 G2 X25.188 Y40.437 I.814 J1.132 E.03009 G1 X23.56 Y40.437 E.05401 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F9996 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F9996 G1 X32.71 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END G1 X24.791 Y35.081 Z27 F30000 G1 X3.472 Y17.723 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.430969 G1 F9996 G1 X3.128 Y17.38 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y17.928 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y18.272 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y18.82 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y18.477 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y19.026 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y19.369 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y19.918 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y19.575 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y20.124 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y20.467 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y21.015 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y20.672 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y21.221 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y21.564 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y22.113 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y21.77 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y22.319 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y22.662 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y23.211 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y22.867 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y23.416 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y23.759 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y24.308 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y23.965 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y24.514 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y24.857 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y25.406 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y25.063 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y25.611 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y25.955 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y26.503 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y26.16 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y26.709 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y27.052 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y27.601 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y27.258 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y27.806 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y28.15 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y28.698 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y28.355 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y28.904 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y29.247 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y29.796 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y29.453 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y30.002 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y30.345 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y30.894 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y30.55 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y31.099 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y31.442 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y31.991 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y31.648 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y32.197 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y32.54 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y33.089 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y32.746 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y33.294 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y33.637 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y34.186 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y33.843 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y34.392 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y34.735 E.01535 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.128 Y34.392 ;WIPE_END G1 X3.192 Y26.76 Z27 F30000 G1 X3.472 Y-7.08 Z27 G1 Z26.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;WIDTH:0.42969 G1 F9996 G1 X3.128 Y-7.423 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-6.876 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y-6.533 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-5.986 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y-6.329 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-5.782 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y-5.439 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-4.892 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y-5.235 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-4.688 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y-4.345 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-3.798 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y-4.141 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-3.594 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y-3.251 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-2.704 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y-3.047 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-2.5 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y-2.157 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-1.61 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y-1.953 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-1.406 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y-1.063 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-.516 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y-.859 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-.312 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y.031 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y.235 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y.782 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y1.125 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y1.672 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y1.328 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y1.875 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y2.219 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y2.766 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y2.422 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y2.969 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y3.313 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y3.86 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y3.516 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y4.063 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y4.407 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y4.953 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y4.61 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y5.157 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y5.5 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y6.047 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y5.704 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y6.251 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y6.594 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y7.141 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y6.798 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y7.345 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y7.688 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y8.235 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y7.892 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y8.439 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y8.782 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y9.329 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y8.986 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y9.533 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.472 Y9.876 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y10.423 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F9996 G1 X3.128 Y10.08 E.0153 ;LAYER_CHANGE ;Z:26.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;26.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.472 Y10.423 ;WIPE_END ;AFTER_LAYER_CHANGE ;26.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27.2 I1.217 J.002 P1 F30000 G1 X3.498 Y-10.448 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5397 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5397 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5397 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z27.2 F30000 G1 X3.498 Y9.952 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5397 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5397 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5397 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z27.2 F30000 G1 X4.34 Y39.152 Z27.2 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5397 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5397 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5397 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z27.2 F30000 G1 Z26.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5397 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F5397 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.15 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5397 G1 X12.778 Y40.437 E.05401 G1 X13.726 Y39.877 E.03649 G2 X13.887 Y39.363 I-.276 J-.369 E.01908 G1 X15.482 Y39.363 E.0529 G1 X14.612 Y39.877 E.0335 G2 X14.456 Y40.437 I.31 J.388 E.02059 G1 X18.02 Y40.437 E.1182 G1 X18.967 Y39.877 E.03649 G2 X19.128 Y39.363 I-.276 J-.369 E.01908 G1 X20.723 Y39.363 E.0529 G1 X19.854 Y39.877 E.0335 G2 X19.698 Y40.437 I.31 J.388 E.02059 G1 X23.261 Y40.437 E.1182 G1 X24.208 Y39.877 E.03649 G2 X24.369 Y39.363 I-.276 J-.369 E.01908 G1 X25.708 Y39.363 E.0444 G1 X25.708 Y39.515 E.00503 G1 X25.095 Y39.877 E.02362 G2 X24.939 Y40.437 I.31 J.388 E.02059 G1 X25.708 Y40.437 E.0255 G1 X25.708 Y39.718 E.02384 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5397 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F5397 G1 X32.71 Y39.9 E.17054 ;LAYER_CHANGE ;Z:27 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;27 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;27 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27.4 I1.071 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5787 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5787 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5787 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z27.4 F30000 G1 X3.498 Y9.952 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5787 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5787 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5787 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z27.4 F30000 G1 X4.34 Y39.152 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5787 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5787 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5787 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X9.82 Y39.178 Z27.4 F30000 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.44144 G1 F5787 G1 X10.67 Y40.029 E.03905 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.669 Y40.591 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X9.256 Y39.178 E.06488 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.692 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X10.136 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.572 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X8.129 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.565 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X9.008 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.445 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X7.002 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.438 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X7.881 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.318 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X5.874 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.311 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X6.754 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.19 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X4.747 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.184 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X5.627 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.063 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X3.62 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y38.466 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X3.128 Y38.123 E.01576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y38.687 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X3.472 Y39.03 E.01576 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y39.25 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X4.5 Y40.622 E.06297 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.936 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X3.128 Y39.814 E.03709 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.936 Y40.622 ;WIPE_END G1 X11.267 Y40.437 Z27.4 F30000 G1 Z27 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5787 G1 X12.895 Y40.437 E.05401 G1 X13.514 Y40.265 E.0213 G3 X14.047 Y40.437 I.129 J.515 E.0196 G1 X18.136 Y40.437 E.13564 G1 X18.755 Y40.265 E.0213 G3 X19.289 Y40.437 I.129 J.515 E.0196 G1 X23.378 Y40.437 E.13564 G1 X23.996 Y40.265 E.0213 G3 X24.53 Y40.437 I.129 J.515 E.0196 G1 X25.708 Y40.437 E.03907 G1 X25.708 Y39.378 E.03514 G3 X24.837 Y39.363 I-.423 J-.745 E.03032 G1 X20.519 Y39.363 E.14323 G3 X19.595 Y39.363 I-.462 J-.768 E.03218 G1 X15.277 Y39.363 E.14323 G3 X14.354 Y39.363 I-.462 J-.768 E.03218 G1 X12.726 Y39.363 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.354 Y39.363 G1 X14.496 Y39.466 G1 X14.692 Y39.48 ;WIPE_END G1 X22.321 Y39.686 Z27.4 F30000 G1 X33.472 Y39.986 Z27.4 G1 Z27 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.44144 G1 F5787 G1 X32.664 Y39.178 E.0371 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.1 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X33.472 Y40.55 E.06298 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.98 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X31.537 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.973 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X32.416 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.853 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X30.409 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.846 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X31.289 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.725 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X29.282 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.719 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X30.162 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.598 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X28.155 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.591 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X29.035 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.471 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X27.028 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.464 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X27.907 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.344 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X25.931 Y39.209 E.06488 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.93 Y39.771 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F5787 G1 X26.78 Y40.622 E.03905 ;LAYER_CHANGE ;Z:27.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;27.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X25.93 Y39.771 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z27.6 I1.111 J-.496 P1 F30000 G1 X3.498 Y-10.448 Z27.6 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4793 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4793 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4793 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z27.6 F30000 G1 X3.498 Y9.952 Z27.6 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4793 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4793 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4793 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X5.98 Y18.557 Z27.6 F30000 G1 X10.602 Y39.152 Z27.6 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4793 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4793 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.785 E.0753 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X12.195 Y38.78 ;WIPE_END G1 X4.574 Y38.368 Z27.6 F30000 G1 X3.498 Y38.31 Z27.6 G1 Z27.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4793 G1 X3.498 Y38.394 E.00279 G1 X3.102 Y38.394 E.01313 G1 X3.102 Y35.152 E.10754 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y38.27 E.10343 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4793 G1 X3.905 Y38.801 E.01629 G1 X2.695 Y38.801 E.04014 G1 X2.695 Y34.745 E.13455 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.27 E.11693 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4793 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y39.236 E.02846 G1 X26.84 Y39.236 E.23045 G1 X26.84 Y40.564 E.0408 G1 X34.34 Y40.564 E.23045 G1 X34.34 Y41.49 E.02846 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y40.564 E.02846 G1 X9.76 Y40.564 E.23045 G1 X9.76 Y39.236 E.0408 G1 X2.26 Y39.236 E.23045 G1 X2.26 Y34.31 E.15136 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.123 Y38.773 F30000 ;TYPE:Gap infill ;WIDTH:0.533982 G1 F4793 G1 X9.977 Y38.773 E.23429 G1 X9.977 Y41.027 F30000 ;WIDTH:0.53398 G1 F4793 G1 X2.478 Y41.027 E.30011 G1 X26.623 Y41.027 F30000 G1 F4793 G1 X34.123 Y41.027 E.30011 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y41.027 ;WIPE_END G1 X34.123 Y38.773 Z27.6 F30000 G1 Z27.2 G1 E.8 F1800 ;WIDTH:0.533982 G1 F4793 G1 X26.623 Y38.773 E.30011 ;LAYER_CHANGE ;Z:27.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;27.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.623 Y38.773 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z27.8 I1.084 J-.553 P1 F30000 G1 X3.498 Y-10.448 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4996 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4996 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 M73 P54 R50 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4996 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z27.8 F30000 G1 X3.498 Y9.952 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4996 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4996 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4996 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.974 Y17.15 Z27.8 F30000 G1 X25.971 Y39.152 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4996 G1 X25.998 Y39.152 E.00089 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.931 Y39.152 E.50849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.405 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4996 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.365 Y38.745 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.4 Y40.745 ;WIPE_END G1 X18.985 Y38.935 Z27.8 F30000 G1 X3.483 Y35.152 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4996 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y38.095 E.09764 G1 X3.102 Y38.095 E.01313 G1 X3.102 Y35.152 E.09764 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4996 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.502 E.12464 G1 X2.695 Y38.502 E.04014 G1 X2.695 Y34.745 E.12464 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.501 Y37.442 Z27.8 F30000 G1 X26.84 Y38.937 Z27.8 G1 Z27.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4996 G1 X26.84 Y40.863 E.05915 G1 X34.34 Y40.863 E.23045 G1 X34.34 Y41.49 E.01928 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y40.863 E.01928 G1 X9.76 Y40.863 E.23045 G1 X9.76 Y38.937 E.05915 G1 X2.26 Y38.937 E.23045 G1 X2.26 Y34.31 E.14219 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.937 E.01928 G1 X26.88 Y38.937 E.22923 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.623 Y38.624 F30000 ;TYPE:Gap infill ;WIDTH:0.2354 G1 F4996 G1 X34.123 Y38.624 E.11763 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y38.624 ;WIPE_END G1 X34.123 Y41.176 Z27.8 F30000 G1 Z27.4 G1 E.8 F1800 G1 F4996 G1 X26.623 Y41.176 E.11763 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.623 Y41.176 ;WIPE_END G1 X21.031 Y40.385 Z27.8 F30000 G1 X4.123 Y38.624 Z27.8 G1 Z27.4 G1 E.8 F1800 G1 F4996 G1 X9.977 Y38.624 E.09183 G1 X9.977 Y41.176 F30000 G1 F4996 G1 X2.478 Y41.176 E.11763 ;LAYER_CHANGE ;Z:27.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;27.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.478 Y41.176 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z28 I1.217 J-.023 P1 F30000 G1 X3.498 Y-10.448 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4482 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4482 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4482 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z28 F30000 G1 X3.498 Y9.952 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4482 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4482 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4482 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.967 Y17.156 Z28 F30000 G1 X25.916 Y39.152 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4482 G1 X25.998 Y39.152 E.00273 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.876 Y39.152 E.50665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.405 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4482 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.365 Y38.745 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.4 Y40.745 ;WIPE_END G1 X18.985 Y38.935 Z28 F30000 G1 X3.483 Y35.152 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4482 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y37.929 E.09211 G1 X3.102 Y37.929 E.01313 G1 X3.102 Y35.152 E.09211 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4482 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.336 E.11911 G1 X2.695 Y38.336 E.04014 G1 X2.695 Y34.745 E.11911 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.507 Y37.387 Z28 F30000 G1 X26.84 Y38.771 Z28 G1 Z27.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4482 G1 X26.84 Y41.029 E.0694 G1 X34.34 Y41.029 E.23045 G1 X34.34 Y41.49 E.01416 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.029 E.01416 G1 X9.76 Y41.029 E.23045 G1 X9.76 Y38.771 E.0694 G1 X2.26 Y38.771 E.23045 G1 X2.26 Y34.31 E.13707 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.771 E.01416 G1 X26.88 Y38.771 E.22923 ;LAYER_CHANGE ;Z:27.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;27.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.845 Y40.77 ;WIPE_END ;AFTER_LAYER_CHANGE ;27.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z28.2 I1.107 J-.505 P1 F30000 G1 X3.498 Y-10.448 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4478 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4478 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4478 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z28.2 F30000 G1 X3.498 Y9.952 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4478 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4478 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4478 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.96 Y17.161 Z28.2 F30000 G1 X25.868 Y39.152 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4478 G1 X25.998 Y39.152 E.00431 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.828 Y39.152 E.50507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.398 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4478 G1 X26.405 Y38.745 E.00023 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.358 Y38.745 E.53616 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.405 Y38.745 G1 X26.405 Y40.698 ;WIPE_END G1 X18.987 Y38.903 Z28.2 F30000 G1 X3.483 Y35.152 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4478 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y37.825 E.08865 G1 X3.102 Y37.825 E.01313 G1 X3.102 Y35.152 E.08865 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4478 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.232 E.11566 G1 X2.695 Y38.232 E.04014 G1 X2.695 Y34.745 E.11566 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.51 Y37.353 Z28.2 F30000 G1 X26.84 Y38.667 Z28.2 G1 Z27.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4478 G1 X26.84 Y41.133 E.0758 G1 X34.34 Y41.133 E.23045 G1 X34.34 Y41.49 E.01096 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.133 E.01096 G1 X9.76 Y41.133 E.23045 G1 X9.76 Y38.667 E.0758 G1 X2.26 Y38.667 E.23045 G1 X2.26 Y34.31 E.13387 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.667 E.01096 G1 X26.88 Y38.667 E.22923 ;LAYER_CHANGE ;Z:28 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;28 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.848 Y40.666 ;WIPE_END ;AFTER_LAYER_CHANGE ;28 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z28.4 I1.107 J-.506 P1 F30000 G1 X3.498 Y-10.448 Z28.4 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4849 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4849 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4849 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z28.4 F30000 G1 X3.498 Y9.952 Z28.4 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4849 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4849 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4849 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.956 Y17.164 Z28.4 F30000 G1 X25.839 Y39.152 Z28.4 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4849 G1 X25.998 Y39.152 E.00528 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.799 Y39.152 E.50411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.385 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4849 G1 X26.405 Y38.745 E.00067 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.345 Y38.745 E.53572 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.405 Y38.745 G1 X26.405 Y40.685 ;WIPE_END G1 X18.986 Y38.894 Z28.4 F30000 G1 X3.483 Y35.152 Z28.4 G1 Z28 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4849 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y37.769 E.08679 G1 X3.102 Y37.769 E.01313 G1 X3.102 Y35.152 E.08679 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4849 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.176 E.1138 G1 X2.695 Y38.176 E.04014 G1 X2.695 Y34.745 E.1138 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.511 Y37.334 Z28.4 F30000 G1 X26.84 Y38.611 Z28.4 G1 Z28 G1 E.8 F1800 M73 P54 R49 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4849 G1 X26.84 Y41.189 E.07924 G1 X34.34 Y41.189 E.23045 G1 X34.34 Y41.49 E.00924 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.189 E.00924 G1 X9.76 Y41.189 E.23045 G1 X9.76 Y38.611 E.07924 G1 X2.26 Y38.611 E.23045 G1 X2.26 Y34.31 E.13215 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.611 E.00924 G1 X26.88 Y38.611 E.22923 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.849 Y40.61 ;WIPE_END G1 X24.88 Y40.437 Z28.4 F30000 G1 Z28 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4849 G1 X23.252 Y40.437 E.05401 G2 X22.358 Y40.344 I-.567 J1.115 E.03048 G1 X22.236 Y40.437 E.00508 G1 X18.011 Y40.437 E.14017 G2 X17.117 Y40.344 I-.567 J1.115 E.03048 G1 X16.995 Y40.437 E.00508 G1 X12.769 Y40.437 E.14017 G2 X11.876 Y40.344 I-.567 J1.115 E.03048 G1 X11.754 Y40.437 E.00508 G1 X10.813 Y40.437 E.0312 G1 X10.813 Y39.434 E.03327 G2 X11.282 Y39.363 I.113 J-.838 E.01595 G1 X15.76 Y39.363 E.14853 G2 X16.523 Y39.363 I.382 J-.854 E.02609 G1 X21.001 Y39.363 E.14853 G2 X21.765 Y39.363 I.382 J-.854 E.02609 G1 X23.393 Y39.363 E.05401 ;LAYER_CHANGE ;Z:28.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;28.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X21.765 Y39.363 G1 X21.403 Y39.447 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z28.6 I1.145 J-.411 P1 F30000 G1 X3.498 Y-10.448 Z28.6 G1 Z28.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F4810 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4810 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4810 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z28.6 F30000 G1 X3.498 Y9.952 Z28.6 G1 Z28.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4810 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4810 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4810 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.955 Y17.165 Z28.6 F30000 G1 X25.828 Y39.152 Z28.6 G1 Z28.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4810 G1 X25.998 Y39.152 E.00565 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.788 Y39.152 E.50373 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.378 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4810 G1 X26.405 Y38.745 E.00089 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.338 Y38.745 E.5355 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.405 Y38.745 G1 X26.405 Y40.678 ;WIPE_END G1 X18.985 Y38.889 Z28.6 F30000 G1 X3.483 Y35.152 Z28.6 G1 Z28.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4810 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y37.748 E.08611 G1 X3.102 Y37.748 E.01313 G1 X3.102 Y35.152 E.08611 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4810 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.155 E.11312 G1 X2.695 Y38.155 E.04014 G1 X2.695 Y34.745 E.11312 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.512 Y37.328 Z28.6 F30000 G1 X26.84 Y38.59 Z28.6 G1 Z28.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4810 G1 X26.84 Y41.21 E.08051 G1 X34.34 Y41.21 E.23045 G1 X34.34 Y41.49 E.0086 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.21 E.0086 G1 X9.76 Y41.21 E.23045 G1 X9.76 Y38.59 E.08051 G1 X2.26 Y38.59 E.23045 G1 X2.26 Y34.31 E.13151 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.59 E.0086 G1 X26.88 Y38.59 E.22923 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.849 Y40.59 ;WIPE_END G1 X25.037 Y40.437 Z28.6 F30000 G1 Z28.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4810 G1 X23.409 Y40.437 E.05401 G2 X22.333 Y39.877 I-3.711 J5.818 E.04028 G3 X22.254 Y39.363 I.353 J-.317 E.01825 G1 X20.73 Y39.363 E.05055 G2 X21.729 Y39.877 I3.412 J-5.401 E.03729 G3 X21.797 Y40.437 I-.393 J.332 E.0198 G1 X18.168 Y40.437 E.12039 G2 X17.092 Y39.877 I-3.711 J5.818 E.04028 G3 X17.013 Y39.363 I.353 J-.317 E.01825 G1 X15.489 Y39.363 E.05055 G2 X16.487 Y39.877 I3.412 J-5.401 E.03729 G3 X16.556 Y40.437 I-.393 J.332 E.0198 G1 X12.926 Y40.437 E.12039 G2 X11.851 Y39.877 I-3.711 J5.818 E.04028 G3 X11.772 Y39.363 I.353 J-.317 E.01825 G1 X10.813 Y39.363 E.0318 G1 X10.813 Y39.67 E.01017 G1 X11.246 Y39.877 E.01592 G3 X11.314 Y40.437 I-.393 J.332 E.0198 G1 X12.723 Y40.437 E.04673 ;LAYER_CHANGE ;Z:28.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;28.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X11.314 Y40.437 G1 X11.367 Y40.205 G1 X11.246 Y39.877 G1 X11.243 Y39.875 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z28.8 I1.203 J-.185 P1 F30000 G1 X3.498 Y-10.448 Z28.8 G1 Z28.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F4801 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4801 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4801 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z28.8 F30000 G1 X3.498 Y9.952 Z28.8 G1 Z28.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4801 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4801 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4801 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.956 Y17.164 Z28.8 F30000 G1 X25.839 Y39.152 Z28.8 G1 Z28.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4801 G1 X25.998 Y39.152 E.00528 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.799 Y39.152 E.50411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.385 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4801 G1 X26.405 Y38.745 E.00067 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.345 Y38.745 E.53572 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.405 Y38.745 G1 X26.405 Y40.685 ;WIPE_END G1 X18.986 Y38.894 Z28.8 F30000 G1 X3.483 Y35.152 Z28.8 G1 Z28.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4801 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y37.769 E.08679 G1 X3.102 Y37.769 E.01313 G1 X3.102 Y35.152 E.08679 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4801 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.176 E.1138 G1 X2.695 Y38.176 E.04014 G1 X2.695 Y34.745 E.1138 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.511 Y37.334 Z28.8 F30000 G1 X26.84 Y38.611 Z28.8 G1 Z28.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4801 G1 X26.84 Y41.189 E.07924 G1 X34.34 Y41.189 E.23045 G1 X34.34 Y41.49 E.00924 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.189 E.00924 G1 X9.76 Y41.189 E.23045 G1 X9.76 Y38.611 E.07924 G1 X2.26 Y38.611 E.23045 G1 X2.26 Y34.31 E.13215 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.611 E.00924 G1 X26.88 Y38.611 E.22923 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.849 Y40.61 ;WIPE_END G1 X25.159 Y40.437 Z28.8 F30000 G1 Z28.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4801 G1 X23.531 Y40.437 E.05401 G3 X22.583 Y39.549 I1.552 J-2.608 E.04341 G1 X22.542 Y39.363 E.00633 G1 X20.587 Y39.363 E.06484 G3 X21.479 Y40.205 I-1.475 J2.456 E.04099 G1 X21.53 Y40.437 E.00789 G1 X18.29 Y40.437 E.10749 G3 X17.341 Y39.549 I1.552 J-2.608 E.04341 G1 X17.301 Y39.363 E.00633 G1 X15.346 Y39.363 E.06484 G3 X16.238 Y40.205 I-1.475 J2.456 E.04099 G1 X16.289 Y40.437 E.00789 G1 X13.048 Y40.437 E.10749 G3 X12.1 Y39.549 I1.552 J-2.608 E.04341 G1 X12.059 Y39.363 E.00633 G1 X10.813 Y39.363 E.04134 G1 X10.813 Y39.974 E.02027 G3 X11.047 Y40.437 I-.355 J.47 E.01781 G1 X12.676 Y40.437 E.05401 ;LAYER_CHANGE ;Z:28.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;28.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X11.047 Y40.437 G1 X10.996 Y40.205 G1 X10.913 Y40.1 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z29 I1.204 J-.177 P1 F30000 G1 X3.498 Y-10.448 Z29 G1 Z28.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F4773 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4773 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4773 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z29 F30000 G1 X3.498 Y9.952 Z29 G1 Z28.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4773 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4773 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4773 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.96 Y17.161 Z29 F30000 G1 X25.868 Y39.152 Z29 G1 Z28.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4773 G1 X25.998 Y39.152 E.00431 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.828 Y39.152 E.50507 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.398 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4773 G1 X26.405 Y38.745 E.00023 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.358 Y38.745 E.53616 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.405 Y38.745 G1 X26.405 Y40.698 ;WIPE_END G1 X18.987 Y38.903 Z29 F30000 G1 X3.483 Y35.152 Z29 G1 Z28.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4773 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y37.825 E.08865 G1 X3.102 Y37.825 E.01313 G1 X3.102 Y35.152 E.08865 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4773 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.232 E.11566 G1 X2.695 Y38.232 E.04014 G1 X2.695 Y34.745 E.11566 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.51 Y37.353 Z29 F30000 G1 X26.84 Y38.667 Z29 G1 Z28.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4773 G1 X26.84 Y41.133 E.0758 G1 X34.34 Y41.133 E.23045 G1 X34.34 Y41.49 E.01096 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.133 E.01096 G1 X9.76 Y41.133 E.23045 G1 X9.76 Y38.667 E.0758 G1 X2.26 Y38.667 E.23045 G1 X2.26 Y34.31 E.13387 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.667 E.01096 G1 X26.88 Y38.667 E.22923 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.848 Y40.666 ;WIPE_END G1 X25.273 Y40.437 Z29 F30000 G1 Z28.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4773 G1 X23.644 Y40.437 E.05401 G3 X22.742 Y39.363 I2.374 J-2.912 E.04681 G1 X20.462 Y39.363 E.07563 G3 X21.34 Y40.437 I-2.165 J2.668 E.04634 G1 X18.403 Y40.437 E.09743 G3 X17.5 Y39.363 I2.374 J-2.912 E.04681 G1 X15.22 Y39.363 E.07563 G3 X16.099 Y40.437 I-2.165 J2.668 E.04634 G1 X13.162 Y40.437 E.09743 G3 X12.259 Y39.363 I2.374 J-2.912 E.04681 G1 X10.813 Y39.363 E.04797 G1 X10.813 Y39.545 E.00605 ;LAYER_CHANGE ;Z:28.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;28.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X10.813 Y39.363 G1 X12.259 Y39.363 G1 X12.341 Y39.549 G1 X12.455 Y39.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;28.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z29.2 I1.198 J-.214 P1 F30000 G1 X3.498 Y-10.448 Z29.2 G1 Z28.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F4813 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4813 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4813 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z29.2 F30000 G1 X3.498 Y9.952 Z29.2 G1 Z28.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4813 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4813 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4813 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.967 Y17.156 Z29.2 F30000 G1 X25.916 Y39.152 Z29.2 G1 Z28.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4813 G1 X25.998 Y39.152 E.00273 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.876 Y39.152 E.50665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.405 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4813 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.365 Y38.745 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.4 Y40.745 ;WIPE_END G1 X18.985 Y38.935 Z29.2 F30000 G1 X3.483 Y35.152 Z29.2 G1 Z28.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4813 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y37.929 E.09211 G1 X3.102 Y37.929 E.01313 G1 X3.102 Y35.152 E.09211 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4813 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.336 E.11911 G1 X2.695 Y38.336 E.04014 G1 X2.695 Y34.745 E.11911 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.507 Y37.387 Z29.2 F30000 G1 X26.84 Y38.771 Z29.2 G1 Z28.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4813 G1 X26.84 Y41.029 E.0694 G1 X34.34 Y41.029 E.23045 G1 X34.34 Y41.49 E.01416 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.029 E.01416 G1 X9.76 Y41.029 E.23045 G1 X9.76 Y38.771 E.0694 G1 X2.26 Y38.771 E.23045 G1 X2.26 Y34.31 E.13707 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.31 E.12291 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.771 E.01416 G1 X26.88 Y38.771 E.22923 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X26.845 Y40.77 ;WIPE_END G1 X23.949 Y39.363 Z29.2 F30000 G1 Z28.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F4813 G1 X25.577 Y39.363 E.05401 G1 X25.787 Y39.625 E.01113 G1 X25.787 Y40.437 E.02694 G1 X23.763 Y40.437 E.06715 G3 X22.92 Y39.363 I24.272 J-19.914 E.04528 G1 X20.336 Y39.363 E.08573 G3 X21.177 Y40.437 I-24.274 J19.878 E.04525 G1 X18.521 Y40.437 E.08808 G3 X17.679 Y39.363 I24.274 J-19.916 E.04528 G1 X15.095 Y39.363 E.08573 G3 X15.936 Y40.437 I-24.275 J19.879 E.04525 G1 X13.28 Y40.437 E.08808 G3 X12.438 Y39.363 I24.274 J-19.916 E.04528 G1 X10.813 Y39.367 E.05388 ;LAYER_CHANGE ;Z:29 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;29 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X12.438 Y39.363 G1 X12.669 Y39.659 ;WIPE_END ;AFTER_LAYER_CHANGE ;29 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z29.4 I1.197 J-.219 P1 F30000 G1 X3.498 Y-10.448 Z29.4 G1 Z29 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5256 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5256 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5256 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z29.4 F30000 G1 X3.498 Y9.952 Z29.4 G1 Z29 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5256 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5256 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 M73 P55 R49 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5256 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.974 Y17.15 Z29.4 F30000 G1 X25.971 Y39.152 Z29.4 G1 Z29 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5256 G1 X25.998 Y39.152 E.00089 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.931 Y39.152 E.50849 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.405 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5256 G1 X26.405 Y41.055 E.07663 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.365 Y38.745 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.4 Y40.745 ;WIPE_END G1 X18.985 Y38.935 Z29.4 F30000 G1 X3.483 Y35.152 Z29.4 G1 Z29 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5256 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y38.095 E.09764 G1 X3.102 Y38.095 E.01313 G1 X3.102 Y35.152 E.09764 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5256 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.502 E.12464 G1 X2.695 Y38.502 E.04014 G1 X2.695 Y34.745 E.12464 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.501 Y37.442 Z29.4 F30000 G1 X26.84 Y38.937 Z29.4 G1 Z29 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5256 G1 X26.84 Y40.863 E.05918 G1 X27.466 Y40.863 E.01924 G1 X33.543 Y40.863 E.18673 G1 X34.34 Y40.863 E.02449 G1 X34.34 Y41.49 E.01927 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y40.863 E.01927 G1 X3.057 Y40.863 E.02449 G1 X9.134 Y40.863 E.18673 G1 X9.76 Y40.863 E.01924 G1 X9.76 Y38.937 E.05918 G1 X9.134 Y38.937 E.01924 G1 X3.057 Y38.937 E.18673 G1 X2.26 Y38.937 E.02449 G1 X2.26 Y38.141 E.02446 G1 X2.26 Y34.94 E.09836 G1 X2.26 Y34.31 E.01936 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y34.94 E.01936 G1 X4.34 Y37.767 E.08687 G1 X4.34 Y38.31 E.01668 G1 X4.883 Y38.31 E.01668 G1 X33.71 Y38.31 E.88577 G1 X34.34 Y38.31 E.01936 G1 X34.34 Y38.937 E.01927 G1 X33.543 Y38.937 E.02449 G1 X27.545 Y38.937 E.1843 G1 X26.88 Y38.937 E.02043 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.623 Y38.624 F30000 ;TYPE:Gap infill ;WIDTH:0.235402 G1 F5256 G1 X34.123 Y38.624 E.11764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y38.624 ;WIPE_END G1 X34.123 Y41.176 Z29.4 F30000 G1 Z29 G1 E.8 F1800 G1 F5256 G1 X26.623 Y41.176 E.11764 G1 X24.717 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5256 G1 X25.787 Y40.437 E.0355 G1 X25.785 Y39.877 E.01857 G3 X25.408 Y39.363 I.765 J-.956 E.02139 G1 X23.049 Y39.363 E.07826 G3 X23.917 Y40.437 I-2.896 J3.231 E.04601 G1 X21.055 Y40.437 E.09496 G3 X20.167 Y39.363 I3.218 J-3.565 E.04638 G1 X17.808 Y39.363 E.07826 G3 X18.676 Y40.437 I-2.896 J3.231 E.04601 G1 X15.813 Y40.437 E.09496 G3 X14.926 Y39.363 I3.218 J-3.565 E.04638 G1 X12.566 Y39.363 E.07826 G3 X13.435 Y40.437 I-2.896 J3.231 E.04601 G1 X11.806 Y40.437 E.05401 G1 X9.977 Y41.176 F30000 ;TYPE:Gap infill ;WIDTH:0.235402 G1 F5256 G1 X2.478 Y41.176 E.11764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.478 Y41.176 ;WIPE_END G1 X4.123 Y38.624 Z29.4 F30000 G1 Z29 G1 E.8 F1800 G1 F5256 G1 X9.977 Y38.624 E.09183 ;LAYER_CHANGE ;Z:29.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;29.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.977 Y38.624 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z29.6 I1.212 J-.111 P1 F30000 G1 X3.498 Y-10.448 Z29.6 G1 Z29.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6842 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6842 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6842 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z29.6 F30000 G1 X3.498 Y9.952 Z29.6 G1 Z29.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6842 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6842 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6842 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X8.978 Y17.147 Z29.6 F30000 G1 X25.998 Y39.152 Z29.6 G1 Z29.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6842 G1 X25.998 Y40.648 E.04962 G1 X10.602 Y40.648 E.51071 G1 X10.602 Y39.152 E.04962 G1 X25.958 Y39.152 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.405 Y38.801 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6842 G1 X26.405 Y41.055 E.07477 G1 X10.195 Y41.055 E.53772 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y38.761 E.00053 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X26.405 Y40.761 ;WIPE_END G1 X18.991 Y38.947 Z29.6 F30000 G1 X3.483 Y35.152 Z29.6 G1 Z29.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6842 G1 X3.498 Y35.152 E.0005 G1 X3.498 Y38.394 E.10754 G1 X3.102 Y38.394 E.01313 G1 X3.102 Y35.152 E.10754 G1 X3.443 Y35.152 E.01131 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y34.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6842 G1 X3.905 Y34.745 E.00013 G1 X3.905 Y38.801 E.13455 G1 X2.695 Y38.801 E.04014 G1 X2.695 Y34.745 E.13455 G1 X3.861 Y34.745 E.03868 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y34.745 G1 X3.905 Y36.701 ;WIPE_END G1 X11.491 Y37.54 Z29.6 F30000 G1 X26.84 Y39.236 Z29.6 G1 Z29.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6842 G1 X26.84 Y40.564 E.04081 G1 F2400 G1 X27.05 Y40.564 E.00645 G1 F1380 G1 X27.89 Y40.564 E.02581 G1 X33.411 Y40.564 E.16964 G1 X34.34 Y40.564 E.02855 M106 S255 G1 X34.34 Y41.49 E.02845 G1 F6842 G1 X2.26 Y41.49 E.98573 G1 F1380 G1 X2.26 Y40.564 E.02845 G1 X3.189 Y40.564 E.02855 G1 X8.71 Y40.564 E.16964 G1 X9.55 Y40.564 E.02581 M106 S255 G1 F2400 G1 X9.76 Y40.564 E.00645 G1 F6842 G1 X9.76 Y39.236 E.04081 G1 F2400 G1 X9.55 Y39.236 E.00645 G1 F1380 G1 X8.71 Y39.236 E.02581 G1 X3.189 Y39.236 E.16964 G1 X2.26 Y39.236 E.02855 M106 S255 G1 X2.26 Y38.307 E.02855 G1 F6842 G1 X2.26 Y34.94 E.10346 G1 X2.26 Y34.31 E.01936 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y34.94 E.01936 G1 X4.34 Y37.767 E.08687 G1 X4.34 Y38.31 E.01668 G1 X4.883 Y38.31 E.01668 G1 X33.71 Y38.31 E.88577 G1 X34.34 Y38.31 E.01936 G1 F1380 G1 X34.34 Y39.236 E.02845 G1 X33.411 Y39.236 E.02855 G1 X27.89 Y39.236 E.16964 G1 X27.05 Y39.236 E.02581 M106 S255 G1 F2400 G1 X26.88 Y39.236 E.00522 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.623 Y38.773 F30000 ;TYPE:Gap infill ;WIDTH:0.533992 G1 F6842 G1 X34.123 Y38.773 E.30012 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y38.773 ;WIPE_END G17 G3 Z29.6 I-.91 J.808 P1 F30000 G1 X34.123 Y41.027 Z29.6 G1 Z29.2 G1 E.8 F1800 ;WIDTH:0.533988 G1 F6842 G1 X26.623 Y41.027 E.30012 G1 X21.544 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6842 G1 X23.173 Y39.363 E.05401 G1 X23.758 Y39.877 E.02584 G3 X24.093 Y40.437 I-.488 J.672 E.02225 G1 X25.787 Y40.437 E.05617 G1 X25.787 Y40.089 E.01153 G3 X25.223 Y39.363 I.924 J-1.3 E.03094 G1 X23.595 Y39.363 E.05401 G1 X22.57 Y40.437 F30000 G1 F6842 G1 X20.941 Y40.437 E.05401 G3 X19.982 Y39.363 I1.315 J-2.141 E.04846 G1 X17.931 Y39.363 E.06801 G3 X18.785 Y40.205 I-2.105 J2.989 E.03994 G1 X18.852 Y40.437 E.00802 G1 X15.7 Y40.437 E.10456 G3 X14.74 Y39.363 I1.315 J-2.141 E.04846 G1 X12.69 Y39.363 E.06801 G3 X13.544 Y40.205 I-2.105 J2.989 E.03994 G1 X13.611 Y40.437 E.00802 G1 X11.983 Y40.437 E.05401 G1 X9.977 Y41.027 F30000 ;TYPE:Gap infill ;WIDTH:0.53399 G1 F6842 G1 X2.478 Y41.027 E.30012 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.478 Y41.027 ;WIPE_END G17 G3 Z29.6 I1.202 J-.189 P1 F30000 G1 X4.123 Y38.773 Z29.6 G1 Z29.2 G1 E.8 F1800 ;WIDTH:0.533992 G1 F6842 G1 X9.977 Y38.773 E.23429 ;LAYER_CHANGE ;Z:29.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;29.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.977 Y38.773 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z29.8 I1.212 J-.11 P1 F30000 G1 X3.498 Y-10.448 Z29.8 G1 Z29.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11370 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11370 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11370 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z29.8 F30000 G1 X3.498 Y9.952 Z29.8 G1 Z29.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11370 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11370 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11370 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.088 Y18.739 Z29.8 F30000 G1 X3.498 Y39.152 Z29.8 G1 Z29.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F11370 G1 X4.104 Y39.152 E.0201 G1 X32.892 Y39.152 E.95495 G1 X33.498 Y39.152 E.0201 G1 F2400 G1 X33.498 Y39.446 E.00975 G1 F600 G1 X33.498 Y39.646 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X33.498 Y40.154 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X33.498 Y40.354 E.00663 M106 S255 G1 F2400 G1 X33.498 Y40.648 E.00975 G1 F11370 G1 X32.892 Y40.648 E.0201 G1 X3.708 Y40.648 E.96809 G1 X3.102 Y40.648 E.0201 G1 F2400 G1 X3.102 Y40.354 E.00975 G1 F600 G1 X3.102 Y40.154 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y39.646 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.102 Y39.446 E.00663 M106 S255 G1 F2400 G1 X3.102 Y38.546 E.02985 G1 F11370 G1 X3.102 Y35.152 E.11259 G1 X3.498 Y35.152 E.01314 G1 X3.498 Y38.546 E.11259 G1 X3.498 Y39.112 E.01878 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F11370 G1 X33.905 Y38.745 E.99516 G1 F2400 G1 X33.905 Y39.446 E.02325 G1 F600 G1 X33.905 Y39.646 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X33.905 Y40.154 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X33.905 Y40.354 E.00663 M106 S255 G1 F2400 G1 X33.905 Y41.055 E.02325 G1 F11370 G1 X2.695 Y41.055 E1.03529 G1 F2400 G1 X2.695 Y40.354 E.02325 G1 F600 G1 X2.695 Y40.154 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y39.646 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X2.695 Y39.446 E.00663 M106 S255 G1 F2400 G1 X2.695 Y38.546 E.02985 G1 F11370 G1 X2.695 Y35 E.11763 G1 X2.695 Y34.745 E.00846 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.705 E.13136 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F11370 G1 X4.883 Y38.31 E.01668 G1 X33.71 Y38.31 E.88577 G1 X34.34 Y38.31 E.01936 G1 F2400 G1 X34.34 Y39.446 E.03491 G1 F600 G1 X34.34 Y39.646 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X34.34 Y40.154 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X34.34 Y40.354 E.00615 M106 S255 G1 F2400 G1 X34.34 Y41.49 E.03491 G1 F11370 G1 X2.26 Y41.49 E.98573 G1 F2400 G1 X2.26 Y40.354 E.03491 G1 F600 G1 X2.26 Y40.154 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y39.646 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X2.26 Y39.446 E.00615 M106 S255 G1 F2400 G1 X2.26 Y38.606 E.02581 G1 F11370 G1 X2.26 Y34.94 E.11265 G1 X2.26 Y34.31 E.01936 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y34.94 E.01936 G1 X4.34 Y37.7 E.08481 G1 X4.34 Y38.27 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.524 Y39.178 Z29.8 F30000 G1 Z29.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X3.524 Y40.452 E.03913 G1 X3.901 Y40.452 E.01159 G1 X3.901 Y39.348 E.03392 G1 X4.278 Y39.348 E.01159 G1 X4.278 Y40.452 E.03392 G1 X4.655 Y40.452 E.01159 G1 X4.655 Y39.348 E.03392 G1 X5.033 Y39.348 E.01159 G1 X5.033 Y40.452 E.03392 G1 X5.41 Y40.452 E.01159 G1 X5.41 Y39.348 E.03392 G1 X5.787 Y39.348 E.01159 G1 X5.787 Y40.452 E.03392 G1 X6.164 Y40.452 E.01159 G1 X6.164 Y39.348 E.03392 G1 X6.541 Y39.348 E.01159 G1 X6.541 Y40.452 E.03392 G1 X6.918 Y40.452 E.01159 G1 X6.918 Y39.348 E.03392 G1 X7.295 Y39.348 E.01159 G1 X7.295 Y40.452 E.03392 G1 X7.672 Y40.452 E.01159 G1 X7.672 Y39.348 E.03392 G1 X8.049 Y39.348 E.01159 G1 X8.049 Y40.452 E.03392 G1 X8.426 Y40.452 E.01159 G1 X8.426 Y39.348 E.03392 G1 X8.803 Y39.348 E.01159 G1 X8.803 Y40.452 E.03392 G1 X9.18 Y40.452 E.01159 G1 X9.18 Y39.348 E.03392 G1 X9.557 Y39.348 E.01159 G1 X9.557 Y40.452 E.03392 G1 X9.935 Y40.452 E.01159 G1 X9.935 Y39.348 E.03392 G1 X10.312 Y39.348 E.01159 G1 X10.312 Y40.622 E.03913 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.222 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F11370 M106 S255 G1 X13.851 Y40.437 E.05401 G2 X13.66 Y39.877 I-.491 J-.145 E.02091 G1 X12.836 Y39.363 E.03222 G1 X14.484 Y39.363 E.05468 G1 X14.473 Y39.549 E.00619 G1 X14.678 Y39.877 E.0128 G1 X15.575 Y40.437 E.0351 G1 X19.092 Y40.437 E.11665 G2 X18.902 Y39.877 I-.491 J-.145 E.02091 G1 X18.077 Y39.363 E.03222 G1 X19.726 Y39.363 E.05468 G1 X19.715 Y39.549 E.00619 G1 X19.919 Y39.877 E.0128 G1 X20.817 Y40.437 E.0351 G1 X22.445 Y40.437 E.05401 G1 X21.69 Y39.363 F30000 G1 F11370 G1 X23.319 Y39.363 E.05401 G1 X24.143 Y39.877 E.03222 G3 X24.333 Y40.437 I-.301 J.415 E.02091 G1 X25.708 Y40.437 E.04559 G1 X25.708 Y40.218 E.00725 G1 X25.16 Y39.877 E.0214 G1 X24.956 Y39.549 E.0128 G1 X24.967 Y39.363 E.00619 G1 X23.522 Y39.363 E.04793 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X24.967 Y39.363 G1 X24.956 Y39.549 G1 X25.151 Y39.862 ;WIPE_END G17 G3 Z29.8 I-.118 J1.211 P1 F30000 G1 X32.936 Y40.622 Z29.8 G1 Z29.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 G1 F1500 G1 X32.936 Y39.348 E.03913 G1 X32.559 Y39.348 E.01159 G1 X32.559 Y40.452 E.03392 G1 X32.182 Y40.452 E.01159 G1 X32.182 Y39.348 E.03392 G1 X31.805 Y39.348 E.01159 G1 X31.805 Y40.452 E.03392 G1 X31.428 Y40.452 E.01159 G1 X31.428 Y39.348 E.03392 G1 X31.051 Y39.348 E.01159 G1 X31.051 Y40.452 E.03392 G1 X30.674 Y40.452 E.01159 G1 X30.674 Y39.348 E.03392 G1 X30.297 Y39.348 E.01159 G1 X30.297 Y40.452 E.03392 G1 X29.92 Y40.452 E.01159 G1 X29.92 Y39.348 E.03392 G1 X29.543 Y39.348 E.01159 G1 X29.543 Y40.452 E.03392 G1 X29.165 Y40.452 E.01159 G1 X29.165 Y39.348 E.03392 G1 X28.788 Y39.348 E.01159 G1 X28.788 Y40.452 E.03392 G1 X28.411 Y40.452 E.01159 G1 X28.411 Y39.348 E.03392 G1 X28.034 Y39.348 E.01159 G1 X28.034 Y40.452 E.03392 G1 X27.657 Y40.452 E.01159 G1 X27.657 Y39.348 E.03392 G1 X27.28 Y39.348 E.01159 G1 X27.28 Y40.452 E.03392 G1 X26.903 Y40.452 E.01159 G1 X26.903 Y39.348 E.03392 G1 X26.526 Y39.348 E.01159 G1 X26.526 Y40.452 E.03392 G1 X26.149 Y40.452 E.01159 M73 P55 R48 G1 X26.149 Y39.178 E.03913 ;LAYER_CHANGE ;Z:29.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;29.6 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X26.149 Y40.452 G1 X26.526 Y40.452 G1 X26.526 Y40.102 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30 I1.107 J-.505 P1 F30000 G1 X3.498 Y-10.448 Z30 G1 Z29.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5469 M106 S255 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5469 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5469 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z30 F30000 G1 X3.498 Y9.952 Z30 G1 Z29.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5469 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5469 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5469 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z30 F30000 G1 X4.34 Y39.152 Z30 G1 Z29.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5469 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5469 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5469 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z30 F30000 G1 Z29.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5469 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F5469 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.392 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5469 G1 X13.02 Y39.363 E.05401 G2 X13.841 Y39.503 I.623 J-1.17 E.02812 G1 X14.043 Y39.363 E.00816 G1 X18.261 Y39.363 E.13992 G2 X19.083 Y39.503 I.623 J-1.17 E.02812 G1 X19.285 Y39.363 E.00816 G1 X23.503 Y39.363 E.13992 G2 X24.324 Y39.503 I.623 J-1.17 E.02812 G1 X24.526 Y39.363 E.00816 G1 X25.708 Y39.363 E.0392 G1 X25.708 Y40.363 E.03316 G2 X24.711 Y40.437 I-.446 J.736 E.03537 G1 X20.711 Y40.437 E.13267 G2 X19.738 Y40.251 I-.768 J1.377 E.03345 G1 X19.47 Y40.437 E.01083 G1 X15.47 Y40.437 E.13267 G2 X14.496 Y40.251 I-.768 J1.377 E.03345 G1 X14.228 Y40.437 E.01083 G1 X12.6 Y40.437 E.05401 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5469 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F5469 G1 X32.71 Y39.9 E.17054 ;LAYER_CHANGE ;Z:29.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;29.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;29.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.2 I1.071 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z30.2 G1 Z29.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5164 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5164 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5164 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z30.2 F30000 G1 X3.498 Y9.952 Z30.2 G1 Z29.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5164 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5164 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5164 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z30.2 F30000 G1 X4.34 Y39.152 Z30.2 G1 Z29.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5164 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5164 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5164 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z30.2 F30000 G1 Z29.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5164 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F5164 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F5164 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F5164 G1 X32.71 Y39.9 E.17054 ;LAYER_CHANGE ;Z:30 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;30 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;30 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.4 I1.071 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z30.4 G1 Z30 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5097 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5097 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5097 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z30.4 F30000 G1 X3.498 Y9.952 Z30.4 G1 Z30 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5097 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5097 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5097 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z30.4 F30000 G1 X4.34 Y39.152 Z30.4 G1 Z30 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5097 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5097 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5097 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X9.46 Y39.544 Z30.4 F30000 G1 Z30 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5097 G1 X3.494 Y39.544 E.1833 G1 X3.494 Y40.256 E.02187 G1 X9.456 Y40.256 E.18318 G1 X9.459 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F5097 G1 X9.064 Y39.9 E.14216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.144 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F5097 G1 X27.14 Y40.256 E.02187 G1 X33.106 Y40.256 E.1833 G1 X33.106 Y39.544 E.02187 G1 X27.184 Y39.544 E.18195 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.496 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F5097 G1 X32.71 Y39.9 E.14216 ;LAYER_CHANGE ;Z:30.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;30.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.6 I1.071 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z30.6 G1 Z30.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4591 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4591 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4591 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z30.6 F30000 G1 X3.498 Y9.952 Z30.6 G1 Z30.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4591 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4591 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4591 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z30.6 F30000 G1 X4.34 Y39.152 Z30.6 G1 Z30.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4591 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4591 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4591 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 ;LAYER_CHANGE ;Z:30.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;30.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z30.8 I1.215 J-.071 P1 F30000 G1 X3.498 Y-10.448 Z30.8 G1 Z30.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4591 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4591 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4591 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z30.8 F30000 G1 X3.498 Y9.952 Z30.8 G1 Z30.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4591 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4591 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4591 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z30.8 F30000 G1 X4.34 Y39.152 Z30.8 G1 Z30.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4591 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4591 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4591 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 ;LAYER_CHANGE ;Z:30.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;30.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z31 I1.215 J-.071 P1 F30000 G1 X3.498 Y-10.448 Z31 G1 Z30.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5282 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5282 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5282 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z31 F30000 G1 X3.498 Y9.952 Z31 G1 Z30.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5282 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5282 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5282 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z31 F30000 G1 X4.34 Y39.152 Z31 G1 Z30.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5282 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 M73 P56 R48 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5282 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5282 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X4.988 Y39.363 Z31 F30000 G1 Z30.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5282 G1 X6.616 Y39.363 E.05401 G2 X7.278 Y39.363 I.331 J-1.033 E.0223 G1 X11.857 Y39.363 E.15192 G2 X12.519 Y39.363 I.331 J-1.033 E.0223 G1 X17.099 Y39.363 E.15192 G2 X17.76 Y39.363 I.331 J-1.033 E.0223 G1 X22.34 Y39.363 E.15192 G2 X23.002 Y39.363 I.331 J-1.033 E.0223 G1 X27.581 Y39.363 E.15192 G2 X28.243 Y39.363 I.331 J-1.033 E.0223 G1 X32.823 Y39.363 E.15192 G2 X33.287 Y39.406 I.329 J-1.024 E.01559 G1 X33.287 Y40.437 E.03419 G1 X32.264 Y40.437 E.03394 G2 X31.331 Y40.437 I-.466 J.91 E.03211 G1 X27.022 Y40.437 E.14294 G2 X26.09 Y40.437 I-.466 J.91 E.03211 G1 X21.781 Y40.437 E.14294 G2 X20.849 Y40.437 I-.466 J.91 E.03211 G1 X16.54 Y40.437 E.14294 G2 X15.607 Y40.437 I-.466 J.91 E.03211 G1 X11.298 Y40.437 E.14294 G2 X10.366 Y40.437 I-.466 J.91 E.03211 G1 X6.057 Y40.437 E.14294 G2 X5.125 Y40.437 I-.466 J.91 E.03211 G1 X3.496 Y40.437 E.05401 ;LAYER_CHANGE ;Z:30.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;30.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X5.125 Y40.437 G1 X5.488 Y40.358 ;WIPE_END ;AFTER_LAYER_CHANGE ;30.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z31.2 I1.216 J-.048 P1 F30000 G1 X3.498 Y-10.448 Z31.2 G1 Z30.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5341 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5341 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5341 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z31.2 F30000 G1 X3.498 Y9.952 Z31.2 G1 Z30.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5341 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5341 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5341 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z31.2 F30000 G1 X4.34 Y39.152 Z31.2 G1 Z30.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5341 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5341 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5341 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X4.494 Y39.363 Z31.2 F30000 G1 Z30.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5341 G1 X6.123 Y39.363 E.05401 G3 X6.151 Y39.877 I-.605 J.291 E.01752 G2 X4.945 Y40.437 I1.737 J5.319 E.0442 G1 X3.317 Y40.437 E.05401 G1 X9.215 Y39.363 F30000 G1 F5341 G1 X7.587 Y39.363 E.05401 G3 X6.463 Y39.877 I-2.71 J-4.44 E.04109 G2 X6.506 Y40.437 I.696 J.229 E.01911 G1 X10.187 Y40.437 E.12211 G3 X11.392 Y39.877 I2.943 J4.759 E.0442 G2 X11.364 Y39.363 I-.633 J-.223 E.01752 G1 X9.736 Y39.363 E.05401 G1 X14.456 Y39.363 F30000 G1 F5341 G1 X12.828 Y39.363 E.05401 G3 X11.704 Y39.877 I-2.71 J-4.44 E.04109 G2 X11.747 Y40.437 I.696 J.229 E.01911 G1 X15.428 Y40.437 E.12211 G3 X16.634 Y39.877 I2.943 J4.759 E.0442 G2 X16.605 Y39.363 I-.633 J-.223 E.01752 G1 X14.977 Y39.363 E.05401 G1 X19.698 Y39.363 F30000 G1 F5341 G1 X18.069 Y39.363 E.05401 G3 X16.946 Y39.877 I-2.71 J-4.44 E.04109 G2 X16.988 Y40.437 I.696 J.229 E.01911 G1 X20.669 Y40.437 E.12211 G3 X21.875 Y39.877 I2.943 J4.759 E.0442 G2 X21.847 Y39.363 I-.633 J-.223 E.01752 G1 X20.218 Y39.363 E.05401 G1 X24.939 Y39.363 F30000 G1 F5341 G1 X23.311 Y39.363 E.05401 G3 X22.187 Y39.877 I-2.71 J-4.44 E.04109 G2 X22.229 Y40.437 I.696 J.229 E.01911 G1 X25.911 Y40.437 E.12211 G3 X27.116 Y39.877 I2.943 J4.759 E.0442 G2 X27.088 Y39.363 I-.633 J-.223 E.01752 G1 X25.46 Y39.363 E.05401 G1 X30.18 Y39.363 F30000 G1 F5341 G1 X28.552 Y39.363 E.05401 G3 X27.428 Y39.877 I-2.71 J-4.44 E.04109 G2 X27.471 Y40.437 I.696 J.229 E.01911 G1 X31.152 Y40.437 E.12211 G3 X32.357 Y39.877 I2.943 J4.759 E.0442 G2 X32.329 Y39.363 I-.633 J-.223 E.01752 G1 X33.287 Y39.363 E.03177 G1 X33.287 Y39.622 E.00857 G1 X32.669 Y39.877 E.02217 G2 X32.712 Y40.437 I.696 J.229 E.01911 G1 X33.287 Y40.437 E.01907 G1 X33.287 Y39.825 E.0203 ;LAYER_CHANGE ;Z:31 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;31 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.287 Y40.437 G1 X32.712 Y40.437 G1 X32.64 Y40.205 G1 X32.669 Y39.877 G1 X32.892 Y39.785 ;WIPE_END ;AFTER_LAYER_CHANGE ;31 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z31.4 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z31.4 G1 Z31 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5168 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5168 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5168 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z31.4 F30000 G1 X3.498 Y9.952 Z31.4 G1 Z31 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5168 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5168 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5168 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z31.4 F30000 G1 X4.34 Y39.152 Z31.4 G1 Z31 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5168 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5168 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5168 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 M73 P56 R47 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y40.315 Z31.4 F30000 G1 Z31 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5168 G1 X3.313 Y40.437 E.00406 G1 X4.819 Y40.437 E.04995 G1 X5.528 Y39.877 E.02998 G2 X5.82 Y39.363 I-.35 J-.539 E.02037 G1 X7.737 Y39.363 E.06356 G1 X7.086 Y39.877 E.02751 G2 X6.785 Y40.437 I.39 J.57 E.0219 G1 X10.06 Y40.437 E.10866 G1 X10.77 Y39.877 E.02998 G2 X11.062 Y39.363 I-.35 J-.539 E.02037 G1 X12.978 Y39.363 E.06356 G1 X12.327 Y39.877 E.02751 G2 X12.026 Y40.437 I.39 J.57 E.0219 G1 X15.302 Y40.437 E.10866 G1 X16.011 Y39.877 E.02998 G2 X16.303 Y39.363 I-.35 J-.539 E.02037 G1 X18.219 Y39.363 E.06356 G1 X17.568 Y39.877 E.02751 G2 X17.267 Y40.437 I.39 J.57 E.0219 G1 X20.543 Y40.437 E.10866 G1 X21.252 Y39.877 E.02998 G2 X21.544 Y39.363 I-.35 J-.539 E.02037 G1 X23.46 Y39.363 E.06356 G1 X22.809 Y39.877 E.02751 G2 X22.509 Y40.437 I.39 J.57 E.0219 G1 X25.784 Y40.437 E.10866 G1 X26.494 Y39.877 E.02998 G2 X26.786 Y39.363 I-.35 J-.539 E.02037 G1 X28.702 Y39.363 E.06356 G1 X28.051 Y39.877 E.02751 G2 X27.75 Y40.437 I.39 J.57 E.0219 G1 X31.026 Y40.437 E.10866 G1 X31.735 Y39.877 E.02998 G2 X32.027 Y39.363 I-.35 J-.539 E.02037 G1 X33.287 Y39.363 E.0418 G1 X33.287 Y39.884 E.01726 G2 X32.991 Y40.437 I.387 J.562 E.02162 G1 X31.363 Y40.437 E.05401 ;LAYER_CHANGE ;Z:31.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;31.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X32.991 Y40.437 G1 X33.035 Y40.205 G1 X33.119 Y40.098 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z31.6 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z31.6 G1 Z31.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5132 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5132 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5132 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z31.6 F30000 G1 X3.498 Y9.952 Z31.6 G1 Z31.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5132 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5132 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5132 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z31.6 F30000 G1 X4.34 Y39.152 Z31.6 G1 Z31.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5132 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5132 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5132 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y40.201 Z31.6 F30000 G1 Z31.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5132 G1 X3.313 Y40.437 E.00784 G1 X4.705 Y40.437 E.04618 G2 X5.614 Y39.363 I-2.131 J-2.726 E.047 G1 X7.863 Y39.363 E.07461 G2 X6.98 Y40.437 I1.95 J2.504 E.0465 G1 X9.946 Y40.437 E.09839 G2 X10.856 Y39.363 I-2.131 J-2.726 E.047 G1 X13.105 Y39.363 E.07461 G2 X12.222 Y40.437 I1.95 J2.504 E.0465 G1 X15.188 Y40.437 E.09839 G2 X16.097 Y39.363 I-2.131 J-2.726 E.047 G1 X18.346 Y39.363 E.07461 G2 X17.463 Y40.437 I1.95 J2.504 E.0465 G1 X20.429 Y40.437 E.09839 G2 X21.338 Y39.363 I-2.131 J-2.726 E.047 G1 X23.587 Y39.363 E.07461 G2 X22.704 Y40.437 I1.95 J2.504 E.0465 G1 X25.67 Y40.437 E.09839 G2 X26.579 Y39.363 I-2.131 J-2.726 E.047 G1 X28.829 Y39.363 E.07461 G2 X27.945 Y40.437 I1.95 J2.504 E.0465 G1 X30.912 Y40.437 E.09839 G2 X31.821 Y39.363 I-2.131 J-2.726 E.047 G1 X33.287 Y39.363 E.04863 G1 X33.287 Y39.525 E.00538 ;LAYER_CHANGE ;Z:31.4 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;31.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.287 Y39.363 G1 X31.821 Y39.363 G1 X31.742 Y39.549 G1 X31.627 Y39.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z31.8 I1.061 J-.596 P1 F30000 G1 X3.498 Y-10.448 Z31.8 G1 Z31.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5128 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5128 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5128 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z31.8 F30000 G1 X3.498 Y9.952 Z31.8 G1 Z31.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5128 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5128 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5128 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z31.8 F30000 G1 X4.34 Y39.152 Z31.8 G1 Z31.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5128 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5128 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5128 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y40.083 Z31.8 F30000 G1 Z31.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5128 G1 X3.313 Y40.437 E.01173 G1 X4.588 Y40.437 E.04229 G2 X5.432 Y39.363 I-13.586 J-11.546 E.04531 G1 X7.988 Y39.363 E.08481 G2 X7.147 Y40.437 I13.587 J11.509 E.04526 G1 X9.829 Y40.437 E.08896 G2 X10.673 Y39.363 I-13.586 J-11.546 E.04531 G1 X13.23 Y39.363 E.08481 G2 X12.389 Y40.437 I13.587 J11.509 E.04526 G1 X15.071 Y40.437 E.08896 G2 X15.914 Y39.363 I-13.586 J-11.546 E.04531 G1 X18.471 Y39.363 E.08481 G2 X17.63 Y40.437 I13.587 J11.509 E.04526 G1 X20.312 Y40.437 E.08896 G2 X21.156 Y39.363 I-13.586 J-11.546 E.04531 G1 X23.712 Y39.363 E.08481 G2 X22.871 Y40.437 I13.587 J11.509 E.04526 G1 X25.553 Y40.437 E.08896 G2 X26.397 Y39.363 I-13.586 J-11.546 E.04531 G1 X28.954 Y39.363 E.08481 G2 X28.113 Y40.437 I13.587 J11.509 E.04526 G1 X30.794 Y40.437 E.08896 G2 X31.638 Y39.363 I-13.586 J-11.546 E.04531 G1 X33.267 Y39.363 E.05401 ;LAYER_CHANGE ;Z:31.6 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;31.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X31.638 Y39.363 G1 X31.409 Y39.655 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z32 I1.063 J-.592 P1 F30000 G1 X3.498 Y-10.448 Z32 G1 Z31.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5128 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5128 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5128 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z32 F30000 G1 X3.498 Y9.952 Z32 G1 Z31.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5128 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5128 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5128 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z32 F30000 G1 X4.34 Y39.152 Z32 G1 Z31.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5128 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5128 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5128 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.673 Y39.363 Z32 F30000 G1 Z31.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5128 G1 X5.302 Y39.363 E.05401 G2 X4.454 Y40.437 I3.876 J3.931 E.0455 G1 X7.271 Y40.437 E.09344 G2 X8.128 Y39.363 I-3.871 J-3.968 E.04569 G1 X10.543 Y39.363 E.08011 G2 X9.695 Y40.437 I3.876 J3.931 E.0455 G1 X12.512 Y40.437 E.09344 G2 X13.369 Y39.363 I-3.871 J-3.968 E.04569 G1 X15.784 Y39.363 E.08011 G2 X14.937 Y40.437 I3.876 J3.931 E.0455 G1 X17.754 Y40.437 E.09344 G2 X18.611 Y39.363 I-3.871 J-3.968 E.04569 G1 X21.026 Y39.363 E.08011 G2 X20.178 Y40.437 I3.876 J3.931 E.0455 G1 X22.995 Y40.437 E.09344 G2 X23.852 Y39.363 I-3.871 J-3.968 E.04569 G1 X26.267 Y39.363 E.08011 G2 X25.419 Y40.437 I3.876 J3.931 E.0455 G1 X28.236 Y40.437 E.09344 G2 X29.093 Y39.363 I-3.871 J-3.968 E.04569 G1 X31.508 Y39.363 E.08011 G2 X30.661 Y40.437 I3.876 J3.931 E.0455 G1 X32.289 Y40.437 E.05401 ;LAYER_CHANGE ;Z:31.8 ;HEIGHT:0.199999 ;BEFORE_LAYER_CHANGE ;31.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.661 Y40.437 G1 X30.872 Y40.131 ;WIPE_END ;AFTER_LAYER_CHANGE ;31.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z32.2 I1.07 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z32.2 G1 Z31.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5295 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5295 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5295 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z32.2 F30000 G1 X3.498 Y9.952 Z32.2 G1 Z31.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5295 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5295 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5295 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z32.2 F30000 G1 X4.34 Y39.152 Z32.2 G1 Z31.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5295 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5295 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5295 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.963 Y38.651 Z32.2 F30000 G1 X32.437 Y39.566 Z32.2 G1 Z31.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.46413 G1 F5295 G1 X4.663 Y39.566 E.95332 G1 X4.663 Y39.987 E.01446 G1 X32.437 Y39.987 E.95332 G1 X32.437 Y39.606 E.01308 ;LAYER_CHANGE ;Z:32 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X32.437 Y39.987 G1 X30.819 Y39.987 ;WIPE_END ;AFTER_LAYER_CHANGE ;32 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32.4 I1.07 J-.58 P1 F30000 G1 X3.498 Y-10.448 Z32.4 G1 Z32 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z32.4 F30000 G1 X3.498 Y9.952 Z32.4 G1 Z32 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z32.4 F30000 G1 X4.34 Y39.152 Z32.4 G1 Z32 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.964 Y38.635 Z32.4 F30000 G1 X33.106 Y39.544 Z32.4 G1 Z32 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5708 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F5708 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:32.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32.6 I1.071 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z32.6 G1 Z32.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z32.6 F30000 G1 X3.498 Y9.952 Z32.6 G1 Z32.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z32.6 F30000 G1 X4.34 Y39.152 Z32.6 G1 Z32.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.964 Y38.635 Z32.6 F30000 G1 X33.106 Y39.544 Z32.6 G1 Z32.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5708 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F5708 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:32.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z32.8 I1.071 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z32.8 G1 Z32.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 M73 P57 R47 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z32.8 F30000 G1 X3.498 Y9.952 Z32.8 G1 Z32.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z32.8 F30000 G1 X4.34 Y39.152 Z32.8 G1 Z32.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5708 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5708 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5708 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.964 Y38.635 Z32.8 F30000 G1 X33.106 Y39.544 Z32.8 G1 Z32.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F5708 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F5708 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:32.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;32.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z33 I1.071 J-.579 P1 F30000 G1 X3.498 Y-10.448 Z33 G1 Z32.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6018 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6018 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6018 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z33 F30000 G1 X3.498 Y9.952 Z33 G1 Z32.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6018 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6018 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6018 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.317 Y18.742 Z33 F30000 G1 X4.34 Y39.152 Z33 G1 Z32.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6018 G1 X33.498 Y39.152 E.96722 G1 X33.498 Y40.648 E.04962 M73 P57 R46 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y39.152 E.13269 G1 X4.3 Y39.152 E.02661 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6018 G1 X33.905 Y38.745 E.98073 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y38.745 E.13269 G1 X4.3 Y38.745 E.0131 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6018 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y38.27 E.12168 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.958 Y38.744 Z33 F30000 G1 X33.472 Y39.951 Z33 G1 Z32.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.424778 G1 F6018 G1 X32.699 Y39.178 E.03399 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.159 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X33.472 Y40.491 E.05775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.062 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X31.619 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.079 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X32.522 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.982 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X30.539 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.999 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X31.442 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.902 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X29.459 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.919 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X30.362 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.822 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X28.379 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.839 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X29.282 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.742 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X27.299 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.759 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X28.202 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.662 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X26.219 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.679 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X27.122 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.582 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X25.139 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.599 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X26.042 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.502 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X24.059 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.519 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X24.962 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.422 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X22.979 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.439 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X23.882 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.342 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X21.899 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.359 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X22.802 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.262 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X20.819 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.279 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X21.722 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.182 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X19.738 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.198 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X20.642 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.102 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X18.658 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.118 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X19.562 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.022 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X17.578 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.038 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X18.482 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.941 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X16.498 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.958 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X17.401 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.861 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X15.418 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.878 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X16.321 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.781 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X14.338 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.798 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X15.241 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.701 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X13.258 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.718 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X14.161 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.621 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X12.178 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.638 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X13.081 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.541 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X11.098 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.558 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X12.001 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.461 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X10.018 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.478 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X10.921 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.381 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X8.938 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.398 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X9.841 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.301 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X7.858 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.318 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X8.761 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.221 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X6.778 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.238 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X7.681 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.141 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X5.698 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.158 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X6.601 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.061 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X4.618 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.078 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X5.521 Y40.622 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.981 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X3.538 Y39.178 E.06351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y39.112 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X3.128 Y38.769 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y39.309 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X4.441 Y40.622 E.05775 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.901 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6018 G1 X3.128 Y39.849 E.03399 ;LAYER_CHANGE ;Z:32.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;32.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.901 Y40.622 ;WIPE_END ;AFTER_LAYER_CHANGE ;32.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z33.2 I1.217 J-.01 P1 F30000 G1 X3.498 Y-10.448 Z33.2 G1 Z32.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z33.2 F30000 G1 X3.498 Y9.952 Z33.2 G1 Z32.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z33.2 F30000 G1 X3.498 Y40.648 Z33.2 G1 Z32.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z33.2 F30000 G1 X33.195 Y40.745 Z33.2 G1 Z32.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:33 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;33 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z33.4 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z33.4 G1 Z33 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z33.4 F30000 G1 X3.498 Y9.952 Z33.4 G1 Z33 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z33.4 F30000 G1 X3.498 Y40.648 Z33.4 G1 Z33 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z33.4 F30000 G1 X33.195 Y40.745 Z33.4 G1 Z33 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:33.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z33.6 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z33.6 G1 Z33.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z33.6 F30000 G1 X3.498 Y9.952 Z33.6 G1 Z33.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z33.6 F30000 G1 X3.498 Y40.648 Z33.6 G1 Z33.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z33.6 F30000 G1 X33.195 Y40.745 Z33.6 G1 Z33.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:33.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z33.8 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z33.8 G1 Z33.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z33.8 F30000 G1 X3.498 Y9.952 Z33.8 G1 Z33.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z33.8 F30000 G1 X3.498 Y40.648 Z33.8 G1 Z33.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z33.8 F30000 G1 X33.195 Y40.745 Z33.8 G1 Z33.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:33.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;33.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z34 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z34 G1 Z33.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z34 F30000 G1 X3.498 Y9.952 Z34 G1 Z33.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z34 F30000 G1 X3.498 Y40.648 Z34 G1 Z33.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z34 F30000 G1 X33.195 Y40.745 Z34 G1 Z33.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:33.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;33.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;33.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z34.2 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z34.2 G1 Z33.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z34.2 F30000 G1 X3.498 Y9.952 Z34.2 G1 Z33.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z34.2 F30000 G1 X3.498 Y40.648 Z34.2 G1 Z33.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z34.2 F30000 G1 X33.195 Y40.745 Z34.2 G1 Z33.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:34 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;34 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z34.4 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z34.4 G1 Z34 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z34.4 F30000 G1 X3.498 Y9.952 Z34.4 G1 Z34 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 M73 P58 R46 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z34.4 F30000 G1 X3.498 Y40.648 Z34.4 G1 Z34 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z34.4 F30000 G1 X33.195 Y40.745 Z34.4 G1 Z34 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:34.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z34.6 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z34.6 G1 Z34.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 M73 P58 R45 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z34.6 F30000 G1 X3.498 Y9.952 Z34.6 G1 Z34.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z34.6 F30000 G1 X3.498 Y40.648 Z34.6 G1 Z34.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z34.6 F30000 G1 X33.195 Y40.745 Z34.6 G1 Z34.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:34.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z34.8 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z34.8 G1 Z34.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z34.8 F30000 G1 X3.498 Y9.952 Z34.8 G1 Z34.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z34.8 F30000 G1 X3.498 Y40.648 Z34.8 G1 Z34.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z34.8 F30000 G1 X33.195 Y40.745 Z34.8 G1 Z34.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:34.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;34.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z35 I1.05 J-.615 P1 F30000 G1 X3.498 Y-10.448 Z35 G1 Z34.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z35 F30000 G1 X3.498 Y9.952 Z35 G1 Z34.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z35 F30000 G1 X3.498 Y40.648 Z35 G1 Z34.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4190 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z35 F30000 G1 X33.195 Y40.745 Z35 G1 Z34.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4190 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4190 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4190 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:34.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;34.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;34.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z35.2 I1.051 J-.614 P1 F30000 G1 X3.498 Y-10.562 Z35.2 G1 Z34.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4230 G1 X3.498 Y-6.952 E.11974 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.562 E.11974 G1 X3.458 Y-10.562 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4230 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.969 E.14675 G1 X8.405 Y-10.969 E.18941 G1 X8.405 Y-10.855 E.00377 G1 X33.905 Y-10.855 E.84588 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4230 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-10.66 E.12045 G1 X2.26 Y-11.404 E.02286 G1 X3.004 Y-11.404 E.02286 G1 X8.096 Y-11.404 E.15646 G1 X8.84 Y-11.404 E.02286 G1 X8.84 Y-11.29 E.0035 G1 X34.34 Y-11.29 E.78354 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.88371 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z35.2 F30000 G1 X3.498 Y9.952 Z35.2 G1 Z34.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4230 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4230 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4230 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z35.2 F30000 G1 X3.498 Y40.648 Z35.2 G1 Z34.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4230 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z35.2 F30000 G1 X33.195 Y40.745 Z35.2 G1 Z34.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4230 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4230 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4230 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:35 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;35 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;35 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z35.4 I1.052 J-.612 P1 F30000 G1 X3.498 Y-10.769 Z35.4 G1 Z35 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4418 G1 X3.498 Y-6.952 E.12662 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.769 E.12662 G1 X3.458 Y-10.769 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4418 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.176 E.15363 G1 X8.405 Y-11.176 E.18941 G1 X8.405 Y-10.855 E.01066 G1 X33.905 Y-10.855 E.84588 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4418 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-10.774 E.12395 G1 F2640 G1 X2.26 Y-11.611 E.02572 G1 X8.84 Y-11.611 E.20219 G1 X8.84 Y-11.29 E.00986 G1 F4418 G1 X9.383 Y-11.29 E.01668 G1 X33.71 Y-11.29 E.7475 G1 X34.34 Y-11.29 E.01936 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.88371 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.701 Y-10.861 Z35.4 F30000 G1 Z35 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.267246 G1 F4418 G1 X8.201 Y-10.861 E.08226 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-10.861 ;WIPE_END G1 X5.218 Y-3.292 Z35.4 F30000 G1 X3.498 Y9.952 Z35.4 G1 Z35 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4418 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4418 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4418 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z35.4 F30000 G1 X3.498 Y40.648 Z35.4 G1 Z35 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4418 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z35.4 F30000 G1 X33.195 Y40.745 Z35.4 G1 Z35 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4418 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4418 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4418 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:35.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;35.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;35.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z35.6 I1.053 J-.611 P1 F30000 G1 X3.498 Y-10.952 Z35.6 G1 Z35.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4434 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.977 E.13351 G1 X3.483 Y-10.977 E.01263 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4434 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.384 E.16052 G1 X8.405 Y-11.384 E.18941 G1 X8.405 Y-10.855 E.01755 G1 X33.905 Y-10.855 E.84588 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4434 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-10.981 E.13031 G1 F2640 G1 X2.26 Y-11.819 E.02575 G1 X8.84 Y-11.819 E.20219 M106 S255 G1 X8.84 Y-11.29 E.01625 G1 F4434 G1 X9.383 Y-11.29 E.01668 G1 X33.71 Y-11.29 E.7475 G1 X34.34 Y-11.29 E.01936 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.88371 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.701 Y-10.964 Z35.6 F30000 G1 Z35.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.474842 G1 F4434 G1 X8.201 Y-10.964 E.15838 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-10.964 ;WIPE_END G1 X5.223 Y-3.395 Z35.6 F30000 G1 X3.498 Y9.952 Z35.6 G1 Z35.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4434 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4434 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4434 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z35.6 F30000 G1 X3.498 Y40.648 Z35.6 G1 Z35.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4434 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z35.6 F30000 G1 X33.195 Y40.745 Z35.6 G1 Z35.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4434 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4434 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4434 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:35.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;35.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;35.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z35.8 I1.053 J-.611 P1 F30000 G1 X3.498 Y-10.952 Z35.8 G1 Z35.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4450 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.185 E.1404 G1 X3.498 Y-11.185 E.01313 G1 X3.498 Y-10.992 E.00638 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4450 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.592 E.1674 G1 X8.405 Y-11.592 E.18941 G1 X8.405 Y-10.855 E.02443 G1 X33.905 Y-10.855 E.84588 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4450 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-11.189 E.13671 G1 F2640 G1 X2.26 Y-12.027 E.02575 G1 X8.84 Y-12.027 E.20219 M106 S255 G1 X8.84 Y-11.29 E.02265 G1 F4450 G1 X9.383 Y-11.29 E.01668 G1 X33.71 Y-11.29 E.7475 G1 X34.34 Y-11.29 E.01936 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.88371 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.701 Y-11.068 Z35.8 F30000 G1 Z35.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.682444 G1 F4450 G1 X8.201 Y-11.068 E.23451 G1 E-.8 F1800 ;WIPE_START G1 F11966.808 G1 X6.201 Y-11.068 ;WIPE_END G1 X5.228 Y-3.498 Z35.8 F30000 G1 X3.498 Y9.952 Z35.8 G1 Z35.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4450 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4450 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4450 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z35.8 F30000 G1 X3.498 Y40.648 Z35.8 G1 Z35.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4450 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z35.8 F30000 G1 X33.195 Y40.745 Z35.8 G1 Z35.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4450 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4450 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4450 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:35.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;35.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;35.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z36 I1.053 J-.611 P1 F30000 G1 X3.498 Y-10.952 Z36 G1 Z35.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4442 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.392 E.14728 G1 X7.998 Y-11.392 E.1624 G1 X7.998 Y-10.952 E.0146 G1 X3.538 Y-10.952 E.14795 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4442 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.799 E.17429 G1 X8.405 Y-11.799 E.18941 G1 X8.405 Y-10.855 E.03132 G1 X33.905 Y-10.855 E.84588 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4442 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-11.397 E.1431 G1 F2640 G1 X2.26 Y-12.234 E.02572 G1 X8.84 Y-12.234 E.20219 M106 S255 G1 X8.84 Y-11.29 E.02901 G1 F4442 G1 X9.383 Y-11.29 E.01668 G1 X33.71 Y-11.29 E.7475 G1 X34.34 Y-11.29 E.01936 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.88371 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.996 Y-.486 Z36 F30000 G1 X3.498 Y9.952 Z36 G1 Z35.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4442 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4442 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4442 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z36 F30000 G1 X3.498 Y40.648 Z36 G1 Z35.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4442 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.102 Y40.648 G1 X3.102 Y39.046 ;WIPE_END G1 X10.722 Y39.476 Z36 F30000 G1 X33.195 Y40.745 Z36 G1 Z35.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4442 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X33.155 Y40.745 E.97028 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4442 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.31 E.18436 G1 X32.72 Y40.31 E.87204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4442 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:35.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;35.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;35.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z36.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z36.2 G1 Z35.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2484 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2484 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z36.2 F30000 G1 X3.498 Y-10.952 Z36.2 G1 Z35.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2484 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.6 E.15417 G1 X6.498 Y-11.6 E.11265 M73 P58 R44 G1 X6.498 Y-10.952 E.02148 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2484 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.007 E.18118 G1 X6.905 Y-12.007 E.13965 M73 P59 R44 G1 X6.905 Y-10.545 E.04849 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2484 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-11.604 E.14946 G1 X2.26 Y-12.442 E.02575 G1 X7.34 Y-12.442 E.15609 M106 S255 G1 X7.34 Y-11.604 E.02575 G1 X7.34 Y-10.74 E.02655 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.306 Y-11.276 Z36.2 F30000 G1 Z35.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.283486 G1 F2484 G1 X6.294 Y-11.276 E.05859 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.276 ;WIPE_END G1 X4.008 Y-3.649 Z36.2 F30000 G1 X3.498 Y9.952 Z36.2 G1 Z35.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2484 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2484 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2484 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z36.2 F30000 G1 X3.498 Y40.31 Z36.2 G1 Z35.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2484 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2484 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2484 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z36.2 F30000 G1 X33.195 Y40.745 Z36.2 G1 Z35.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2484 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2484 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2484 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:36 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;36 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;36 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z36.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z36.4 G1 Z36 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2498 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2498 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z36.4 F30000 G1 X3.498 Y-10.952 Z36.4 G1 Z36 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2498 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.807 E.16106 G1 X6.498 Y-11.807 E.11265 G1 X6.498 Y-10.952 E.02837 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2498 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.214 E.18806 G1 X6.905 Y-12.214 E.13965 G1 X6.905 Y-10.545 E.05538 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2498 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-11.812 E.15585 G1 X2.26 Y-12.649 E.02572 G1 X7.34 Y-12.649 E.15609 M106 S255 G1 X7.34 Y-11.812 E.02572 G1 X7.34 Y-10.74 E.03294 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.306 Y-11.38 Z36.4 F30000 G1 Z36 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.491086 G1 F2498 G1 X6.294 Y-11.38 E.10915 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.38 ;WIPE_END G1 X4.01 Y-3.753 Z36.4 F30000 G1 X3.498 Y9.952 Z36.4 G1 Z36 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2498 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2498 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2498 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z36.4 F30000 G1 X3.498 Y40.31 Z36.4 G1 Z36 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2498 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2498 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2498 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z36.4 F30000 G1 X33.195 Y40.745 Z36.4 G1 Z36 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2498 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2498 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2498 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:36.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;36.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;36.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z36.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z36.6 G1 Z36.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2576 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2576 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z36.6 F30000 G1 X3.498 Y-10.952 Z36.6 G1 Z36.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2576 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.015 E.16794 G1 X6.498 Y-12.015 E.11265 G1 X6.498 Y-10.952 E.03526 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2576 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.422 E.19495 G1 X6.905 Y-12.422 E.13965 G1 X6.905 Y-10.545 E.06226 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2576 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.019 E.16221 G1 X2.26 Y-12.857 E.02575 G1 X8.84 Y-12.857 E.20219 M106 S255 G1 X8.84 Y-12.71 E.00452 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.019 E.02123 G1 X7.34 Y-10.74 E.0393 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.13 Y-11.32 Z36.6 F30000 G1 Z36.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.370802 G1 F2576 G1 X6.13 Y-11.647 E.00876 G1 X3.47 Y-11.647 E.07109 G1 X3.47 Y-11.32 E.00876 G1 X6.09 Y-11.32 E.07003 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.09 Y-11.32 ;WIPE_END G1 X3.878 Y-3.69 Z36.6 F30000 G1 X3.498 Y9.952 Z36.6 G1 Z36.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2576 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2576 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2576 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z36.6 F30000 G1 X3.498 Y40.31 Z36.6 G1 Z36.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2576 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2576 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2576 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z36.6 F30000 G1 X33.195 Y40.745 Z36.6 G1 Z36.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2576 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2576 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2576 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:36.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;36.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;36.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z36.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z36.8 G1 Z36.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2591 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2591 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z36.8 F30000 G1 X3.498 Y-10.952 Z36.8 G1 Z36.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2591 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.223 E.17483 G1 X6.498 Y-12.223 E.11265 G1 X6.498 Y-10.952 E.04214 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2591 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.63 E.20184 G1 X6.905 Y-12.63 E.13965 G1 X6.905 Y-10.545 E.06915 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2591 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.227 E.1686 G1 X2.26 Y-13.065 E.02575 G1 X8.84 Y-13.065 E.20219 M106 S255 G1 X8.84 Y-12.71 E.01091 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.079 Y-11.371 Z36.8 F30000 G1 Z36.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.474603 G1 F2591 G1 X6.079 Y-11.803 E.01519 G1 X3.521 Y-11.803 E.08995 G1 X3.521 Y-11.371 E.01519 G1 X6.039 Y-11.371 E.08854 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.039 Y-11.371 ;WIPE_END G1 X3.845 Y-3.741 Z36.8 F30000 G1 X3.498 Y9.952 Z36.8 G1 Z36.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2591 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2591 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2591 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z36.8 F30000 G1 X3.498 Y40.31 Z36.8 G1 Z36.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2591 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2591 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2591 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z36.8 F30000 G1 X33.195 Y40.745 Z36.8 G1 Z36.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2591 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2591 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2591 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:36.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;36.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;36.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z37 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z37 G1 Z36.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2663 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2663 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z37 F30000 G1 X3.498 Y-10.952 Z37 G1 Z36.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2663 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.43 E.18172 G1 X6.498 Y-12.43 E.11265 G1 X6.498 Y-10.952 E.04903 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2663 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-12.375 E.18493 G1 X2.695 Y-12.837 E.01533 G1 X3.158 Y-12.837 E.01536 G1 X6.442 Y-12.837 E.10894 G1 X6.905 Y-12.837 E.01536 G1 X6.905 Y-12.375 E.01533 G1 X6.905 Y-10.8 E.05225 G1 X6.905 Y-10.545 E.00846 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2663 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.435 E.17499 G1 F2640 G1 X2.26 Y-13.272 E.02572 G1 X8.84 Y-13.272 E.20219 M106 S255 G1 X8.84 Y-12.71 E.01727 G1 F2663 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.106 Y-11.344 Z37 F30000 G1 Z36.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2663 G1 X6.106 Y-12.038 E.02132 G1 X3.494 Y-12.038 E.08025 G1 X3.494 Y-11.344 E.02132 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.841 Y-11.691 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.359728 G1 F2663 G1 X5.719 Y-11.691 E.04848 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.123 Y-12.991 F30000 ;TYPE:Gap infill ;WIDTH:0.17012 G1 F2663 G1 X8.623 Y-12.991 E.01555 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.123 Y-12.991 ;WIPE_END G1 X5.931 Y-5.452 Z37 F30000 G1 X3.498 Y9.952 Z37 G1 Z36.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2663 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2663 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2663 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z37 F30000 G1 X3.498 Y40.31 Z37 G1 Z36.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2663 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2663 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2663 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z37 F30000 G1 X33.195 Y40.745 Z37 G1 Z36.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2663 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2663 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2663 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:36.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;36.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;36.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z37.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z37.2 G1 Z36.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2681 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2681 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z37.2 F30000 G1 X3.498 Y-10.952 Z37.2 G1 Z36.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2681 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.638 E.1886 G1 X6.498 Y-12.638 E.11265 G1 X6.498 Y-10.952 E.05592 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2681 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-12.582 E.1918 G1 X2.695 Y-13.045 E.01536 G1 X3.158 Y-13.045 E.01536 G1 X6.442 Y-13.045 E.10894 G1 X6.905 Y-13.045 E.01536 G1 X6.905 Y-12.582 E.01536 G1 X6.905 Y-10.8 E.05911 G1 X6.905 Y-10.545 E.00846 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2681 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.642 E.18135 G1 F2640 G1 X2.26 Y-13.48 E.02575 G1 X8.84 Y-13.48 E.20219 M106 S255 G1 X8.84 Y-12.71 E.02366 G1 F2681 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.106 Y-11.344 Z37.2 F30000 G1 Z36.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2681 G1 X6.106 Y-12.246 E.0277 G1 X3.494 Y-12.246 E.08025 G1 X3.494 Y-11.344 E.0277 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.945 Y-11.795 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.56733 G1 F2681 G1 X5.615 Y-11.795 E.07137 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.123 Y-13.095 F30000 ;TYPE:Gap infill ;WIDTH:0.377722 G1 F2681 G1 X8.623 Y-13.095 E.04092 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.123 Y-13.095 ;WIPE_END G1 X5.937 Y-5.555 Z37.2 F30000 G1 X3.498 Y9.952 Z37.2 G1 Z36.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2681 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2681 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2681 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z37.2 F30000 G1 X3.498 Y40.31 Z37.2 G1 Z36.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2681 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2681 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2681 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z37.2 F30000 G1 X33.195 Y40.745 Z37.2 G1 Z36.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2681 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2681 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2681 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:37 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;37 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;37 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z37.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z37.4 G1 Z37 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2730 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2730 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z37.4 F30000 G1 X3.498 Y-10.952 Z37.4 G1 Z37 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2730 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.845 E.19549 G1 X6.498 Y-12.845 E.11265 G1 X6.498 Y-10.952 E.0628 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2730 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-12.79 E.1987 G1 X2.695 Y-13.252 E.01533 G1 X3.158 Y-13.252 E.01536 G1 X6.442 Y-13.252 E.10894 G1 X6.905 Y-13.252 E.01536 G1 X6.905 Y-12.79 E.01533 G1 X6.905 Y-10.8 E.06601 G1 X6.905 Y-10.545 E.00846 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2730 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.85 E.18774 G1 F2640 G1 X2.26 Y-13.687 E.02572 G1 X8.84 Y-13.687 E.20219 M106 S255 G1 X8.84 Y-12.71 E.03002 G1 F2730 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.106 Y-11.344 Z37.4 F30000 G1 Z37 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2730 G1 X6.106 Y-12.453 E.03408 G1 X3.494 Y-12.453 E.08025 G1 X3.494 Y-11.344 E.03408 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.408925 G1 F2730 G1 X5.734 Y-12.082 E.01092 G1 X3.866 Y-12.082 E.05573 G1 X3.866 Y-11.716 E.01092 G1 X5.694 Y-11.716 E.05454 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.123 Y-13.199 F30000 ;TYPE:Gap infill ;WIDTH:0.58532 G1 F2730 G1 X8.623 Y-13.199 E.0663 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.123 Y-13.199 ;WIPE_END G1 X5.942 Y-5.658 Z37.4 F30000 G1 X3.498 Y9.952 Z37.4 G1 Z37 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2730 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2730 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2730 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z37.4 F30000 G1 X3.498 Y40.31 Z37.4 G1 Z37 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2730 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2730 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2730 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z37.4 F30000 G1 X33.195 Y40.745 Z37.4 G1 Z37 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2730 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2730 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2730 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:37.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;37.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;37.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z37.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z37.6 G1 Z37.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2778 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2778 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z37.6 F30000 G1 X3.498 Y-10.952 Z37.6 G1 Z37.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2778 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-13.053 E.20238 G1 X6.498 Y-13.053 E.11265 G1 X6.498 Y-10.952 E.06969 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2778 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-12.997 E.20557 G1 X2.695 Y-13.46 E.01536 G1 X3.158 Y-13.46 E.01536 G1 X7.942 Y-13.46 E.15869 G1 X8.405 Y-13.46 E.01536 G1 X8.405 Y-13.145 E.01045 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2778 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-13.057 E.1941 G1 F2640 G1 X2.26 Y-13.895 E.02575 G1 X8.84 Y-13.895 E.20219 M106 S255 G1 X8.84 Y-12.71 E.03641 G1 F2778 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.106 Y-11.344 Z37.6 F30000 G1 Z37.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2778 G1 X6.106 Y-12.661 E.04046 G1 X3.494 Y-12.661 E.08025 G1 X3.494 Y-11.344 E.04046 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.682 Y-11.768 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.512723 G1 F2778 G1 X5.682 Y-12.237 E.01799 G1 X3.918 Y-12.237 E.06756 G1 X3.918 Y-11.768 E.01799 G1 X5.642 Y-11.768 E.06603 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.918 Y-11.768 G1 X3.918 Y-12.043 ;WIPE_END G1 X3.772 Y-4.412 Z37.6 F30000 G1 X3.498 Y9.952 Z37.6 G1 Z37.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2778 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2778 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2778 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z37.6 F30000 G1 X3.498 Y40.31 Z37.6 G1 Z37.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2778 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2778 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2778 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z37.6 F30000 G1 X33.195 Y40.745 Z37.6 G1 Z37.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2778 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2778 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2778 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:37.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;37.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;37.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z37.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z37.8 G1 Z37.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 M73 P59 R43 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z37.8 F30000 G1 X3.498 Y-10.952 Z37.8 G1 Z37.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-13.261 E.20928 G1 X6.498 Y-13.261 E.11265 G1 X6.498 Y-10.952 E.07659 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2842 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-13.205 E.21247 G1 X2.695 Y-13.668 E.01536 G1 X3.158 Y-13.668 E.01536 G1 X7.942 Y-13.668 E.15869 G1 X8.405 Y-13.668 E.01536 G1 X8.405 Y-13.145 E.01735 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-13.265 E.2005 G1 F2640 G1 X2.26 Y-14.103 E.02575 G1 X8.84 Y-14.103 E.20219 M106 S255 G1 X8.84 Y-12.71 E.0428 G1 F2842 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.256 Y-12.106 Z37.8 F30000 G1 Z37.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.43597 G1 F2842 G1 X5.304 Y-12.106 E.03355 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.729 Y-11.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2842 G1 X5.729 Y-12.491 E.02366 G1 X3.871 Y-12.491 E.05708 G1 X3.871 Y-11.721 E.02366 G1 X5.689 Y-11.721 E.05585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2842 G1 X6.106 Y-12.868 E.04684 G1 X3.494 Y-12.868 E.08025 G1 X3.494 Y-11.344 E.04684 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.701 Y-13.406 F30000 ;TYPE:Gap infill ;WIDTH:0.15844 G1 F2842 G1 X8.201 Y-13.406 E.01412 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.701 Y-13.406 ;WIPE_END G1 X5.664 Y-5.845 Z37.8 F30000 G1 X3.498 Y9.952 Z37.8 G1 Z37.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2842 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z37.8 F30000 G1 X3.498 Y40.31 Z37.8 G1 Z37.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2842 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z37.8 F30000 G1 X33.195 Y40.745 Z37.8 G1 Z37.4 M73 P60 R43 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2842 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:37.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;37.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;37.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z38 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z38 G1 Z37.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2865 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2865 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z38 F30000 G1 X3.498 Y-10.952 Z38 G1 Z37.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2865 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-13.468 E.21615 G1 X6.498 Y-13.468 E.11265 G1 X6.498 Y-10.952 E.08346 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2865 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-13.413 E.21937 G1 X2.695 Y-13.875 E.01533 G1 X3.158 Y-13.875 E.01536 G1 X7.942 Y-13.875 E.15869 G1 X8.405 Y-13.875 E.01536 G1 X8.405 Y-13.145 E.02422 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2865 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-13.473 E.20689 G1 F2640 G1 X2.26 Y-14.31 E.02572 G1 X8.84 Y-14.31 E.20219 M106 S255 G1 X8.84 Y-12.71 E.04916 G1 F2865 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.36 Y-12.21 Z38 F30000 G1 Z37.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.64357 G1 F2865 G1 X5.2 Y-12.21 E.0411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.729 Y-11.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2865 G1 X5.729 Y-12.699 E.03004 G1 X3.871 Y-12.699 E.05708 G1 X3.871 Y-11.721 E.03004 G1 X5.689 Y-11.721 E.05585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2865 G1 X6.106 Y-13.076 E.05322 G1 X3.494 Y-13.076 E.08025 G1 X3.494 Y-11.344 E.05322 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.701 Y-13.51 F30000 ;TYPE:Gap infill ;WIDTH:0.36604 G1 F2865 G1 X8.201 Y-13.51 E.03949 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.701 Y-13.51 ;WIPE_END G1 X5.669 Y-5.948 Z38 F30000 G1 X3.498 Y9.952 Z38 G1 Z37.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2865 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2865 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2865 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z38 F30000 G1 X3.498 Y40.31 Z38 G1 Z37.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2865 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2865 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2865 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z38 F30000 G1 X33.195 Y40.745 Z38 G1 Z37.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2865 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2865 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2865 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:37.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;37.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;37.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z38.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z38.2 G1 Z37.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2913 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2913 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z38.2 F30000 G1 X3.498 Y-10.952 Z38.2 G1 Z37.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2913 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-13.676 E.22305 G1 X6.498 Y-13.676 E.11265 G1 X6.498 Y-10.952 E.09036 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2913 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-13.62 E.22623 G1 X2.695 Y-14.083 E.01536 G1 X3.158 Y-14.083 E.01536 G1 X7.942 Y-14.083 E.15869 G1 X8.405 Y-14.083 E.01536 G1 X8.405 Y-13.145 E.03112 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2913 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-13.68 E.21325 G1 F2640 G1 X2.26 Y-14.518 E.02575 G1 X8.84 Y-14.518 E.20219 M106 S255 G1 X8.84 Y-12.71 E.05555 G1 F2913 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X5.338 Y-12.112 Z38.2 F30000 G1 Z37.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.447045 G1 F2913 G1 X5.338 Y-12.516 E.01331 G1 X4.262 Y-12.516 E.03544 G1 X4.262 Y-12.112 E.01331 G1 X5.298 Y-12.112 E.03413 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.729 Y-11.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2913 G1 X5.729 Y-12.907 E.03642 G1 X3.871 Y-12.907 E.05708 G1 X3.871 Y-11.721 E.03642 G1 X5.689 Y-11.721 E.05585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2913 G1 X6.106 Y-13.284 E.05959 G1 X3.494 Y-13.284 E.08025 G1 X3.494 Y-11.344 E.05959 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.701 Y-13.614 F30000 ;TYPE:Gap infill ;WIDTH:0.573642 G1 F2913 G1 X8.201 Y-13.614 E.06487 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.701 Y-13.614 ;WIPE_END G1 X5.673 Y-6.051 Z38.2 F30000 G1 X3.498 Y9.952 Z38.2 G1 Z37.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2913 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2913 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2913 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z38.2 F30000 G1 X3.498 Y40.31 Z38.2 G1 Z37.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2913 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2913 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2913 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z38.2 F30000 G1 X33.195 Y40.745 Z38.2 G1 Z37.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2913 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2913 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2913 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:38 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;38 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;38 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z38.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z38.4 G1 Z38 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2948 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2948 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z38.4 F30000 G1 X3.498 Y-10.952 Z38.4 G1 Z38 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2948 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-13.883 E.22991 G1 X7.998 Y-13.883 E.16241 G1 X7.998 Y-13.552 E.01098 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2948 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-13.828 E.23313 G1 X2.695 Y-14.29 E.01533 G1 X3.158 Y-14.29 E.01536 G1 X7.942 Y-14.29 E.15869 G1 X8.405 Y-14.29 E.01536 G1 X8.405 Y-13.145 E.03798 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2948 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-13.888 E.21964 G1 F2640 G1 X2.26 Y-14.725 E.02572 G1 X8.84 Y-14.725 E.20219 M106 S255 G1 X8.84 Y-13.888 E.02572 G1 F2948 G1 X8.84 Y-13.34 E.01684 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X5.286 Y-12.164 Z38.4 F30000 G1 Z38 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.550846 G1 F2948 G1 X5.286 Y-12.672 E.02102 G1 X4.314 Y-12.672 E.04025 G1 X4.314 Y-12.164 E.02102 G1 X5.246 Y-12.164 E.0386 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.729 Y-11.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2948 G1 X5.729 Y-13.114 E.0428 G1 X3.871 Y-13.114 E.05708 G1 X3.871 Y-11.721 E.0428 G1 X5.689 Y-11.721 E.05585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2948 G1 X6.106 Y-13.491 E.06597 G1 X3.494 Y-13.491 E.08025 G1 X3.494 Y-11.344 E.06597 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.066 Y-11.344 ;WIPE_END G1 X3.862 Y-3.714 Z38.4 F30000 G1 X3.498 Y9.952 Z38.4 G1 Z38 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2948 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2948 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2948 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z38.4 F30000 G1 X3.498 Y40.31 Z38.4 G1 Z38 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2948 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2948 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2948 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z38.4 F30000 G1 X33.195 Y40.745 Z38.4 G1 Z38 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2948 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2948 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2948 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:38.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;38.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;38.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z38.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z38.6 G1 Z38.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z38.6 F30000 G1 X3.498 Y-10.952 Z38.6 G1 Z38.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-14.091 E.23681 G1 X7.998 Y-14.091 E.16241 G1 X7.998 Y-13.552 E.01788 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3009 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-14.035 E.24 G1 X2.695 Y-14.498 E.01536 G1 X3.158 Y-14.498 E.01536 G1 X7.942 Y-14.498 E.15869 G1 X8.405 Y-14.498 E.01536 G1 X8.405 Y-13.145 E.04488 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-14.095 E.226 G1 F2640 G1 X2.26 Y-14.933 E.02575 G1 X8.84 Y-14.933 E.20219 M106 S255 G1 X8.84 Y-14.095 E.02575 G1 F3009 G1 X8.84 Y-13.34 E.0232 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.672 Y-12.521 Z38.6 F30000 G1 Z38.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.51221 G1 F3009 G1 X4.889 Y-12.521 E.0083 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.352 Y-12.098 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3009 G1 X5.352 Y-12.945 E.02601 G1 X4.248 Y-12.945 E.0339 G1 X4.248 Y-12.098 E.02601 G1 X5.312 Y-12.098 E.03267 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.729 Y-11.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3009 G1 X5.729 Y-13.14 E.0436 G1 X5.648 Y-13.179 E.00277 G1 X5.598 Y-13.322 E.00463 G1 X3.871 Y-13.322 E.05306 G1 X3.871 Y-11.721 E.04918 G1 X5.689 Y-11.721 E.05585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3009 G1 X6.106 Y-13.327 E.06093 G1 X5.943 Y-13.414 E.00566 G1 X5.902 Y-13.699 E.00886 G1 X3.494 Y-13.699 E.074 G1 X3.494 Y-11.344 E.07235 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.294 Y-13.821 F30000 ;TYPE:Gap infill ;WIDTH:0.17468 G1 F3009 G1 X7.794 Y-13.821 E.01611 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.294 Y-13.821 ;WIPE_END G1 X5.403 Y-6.241 Z38.6 F30000 G1 X3.498 Y9.952 Z38.6 G1 Z38.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3009 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z38.6 F30000 G1 X3.498 Y40.31 Z38.6 G1 Z38.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3009 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z38.6 F30000 G1 X33.195 Y40.745 Z38.6 G1 Z38.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3009 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:38.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;38.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;38.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z38.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z38.8 G1 Z38.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3051 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3051 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z38.8 F30000 G1 X3.498 Y-10.952 Z38.8 G1 Z38.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3051 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-14.299 E.24371 G1 X7.998 Y-14.299 E.16241 G1 X7.998 Y-13.552 E.02478 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3051 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-14.243 E.2469 G1 X2.695 Y-14.706 E.01536 G1 X3.158 Y-14.706 E.01536 G1 X7.942 Y-14.706 E.15869 G1 X8.405 Y-14.706 E.01536 G1 X8.405 Y-13.145 E.05178 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3051 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-14.303 E.23239 G1 F2640 G1 X2.26 Y-15.141 E.02575 G1 X8.84 Y-15.141 E.20219 M106 S255 G1 X8.84 Y-14.303 E.02575 G1 F3051 G1 X8.84 Y-13.34 E.02959 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.994 Y-12.456 Z38.8 F30000 G1 Z38.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.381365 G1 F3051 G1 X4.994 Y-12.795 E.00933 G1 X4.606 Y-12.795 E.0107 G1 X4.606 Y-12.456 E.00933 G1 X4.954 Y-12.456 E.00959 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.352 Y-12.098 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3051 G1 X5.352 Y-12.988 E.02733 G1 X5.302 Y-13.014 E.00174 G1 X5.261 Y-13.152 E.00442 G1 X4.248 Y-13.152 E.03111 G1 X4.248 Y-12.098 E.03239 G1 X5.312 Y-12.098 E.03267 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.729 Y-11.721 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3051 G1 X5.729 Y-13.161 E.04423 G1 X5.618 Y-13.221 E.00389 G1 X5.526 Y-13.529 E.00989 G1 X3.871 Y-13.529 E.05083 G1 X3.871 Y-11.721 E.05556 G1 X5.689 Y-11.721 E.05585 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3051 G1 X6.106 Y-13.327 E.06093 G1 X5.933 Y-13.427 E.00614 G1 X5.902 Y-13.906 E.01475 G1 X3.494 Y-13.906 E.074 G1 X3.494 Y-11.344 E.07873 G1 X6.066 Y-11.344 E.07902 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.294 Y-13.925 F30000 ;TYPE:Gap infill ;WIDTH:0.38228 G1 F3051 G1 X7.794 Y-13.925 E.04148 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.294 Y-13.925 ;WIPE_END G1 X5.407 Y-6.345 Z38.8 F30000 G1 X3.498 Y9.952 Z38.8 G1 Z38.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3051 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3051 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3051 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z38.8 F30000 G1 X3.498 Y40.31 Z38.8 G1 Z38.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3051 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3051 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3051 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z38.8 F30000 G1 X33.195 Y40.745 Z38.8 G1 Z38.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3051 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3051 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3051 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:38.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;38.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;38.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z39 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z39 G1 Z38.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3121 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3121 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z39 F30000 G1 X3.498 Y-10.952 Z39 G1 Z38.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3121 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-14.506 E.25058 G1 X7.998 Y-14.506 E.16241 G1 X7.998 Y-13.552 E.03165 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3121 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-14.451 E.2538 G1 X2.695 Y-14.913 E.01533 G1 F2940 G1 X3.158 Y-14.913 E.01536 G1 X7.942 Y-14.913 E.15869 G1 X8.405 Y-14.913 E.01536 G1 F3121 G1 X8.405 Y-13.145 E.05865 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3121 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-14.511 E.23878 G1 F2640 G1 X2.26 Y-15.348 E.02572 G1 X8.84 Y-15.348 E.20219 M106 S255 G1 X8.84 Y-14.511 E.02572 G1 F3121 G1 X8.84 Y-13.34 E.03598 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.106 Y-11.962 Z39 F30000 G1 Z38.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3121 G1 X6.106 Y-13.327 E.04193 G1 X5.958 Y-13.397 E.00504 G1 X5.902 Y-13.543 E.0048 G1 X5.902 Y-14.114 E.01753 G1 X3.954 Y-14.114 E.05986 G1 X6.078 Y-11.991 E.09227 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.636 Y-13.076 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.556787 G1 F3121 G1 X5.608 Y-13.193 E.00504 ;WIDTH:0.519127 G1 X5.579 Y-13.31 E.00467 ;WIDTH:0.481468 G1 X5.551 Y-13.426 E.0043 ;WIDTH:0.426555 G3 X5.523 Y-13.734 I.623 J-.212 E.00976 G1 X4.871 Y-13.734 E.02039 G1 X5.206 Y-13.399 E.01482 ;WIDTH:0.443809 G1 X5.305 Y-13.324 E.00407 ;WIDTH:0.481468 G1 X5.405 Y-13.249 E.00445 ;WIDTH:0.519127 G1 X5.504 Y-13.175 E.00483 ;WIDTH:0.537957 G1 X5.604 Y-13.1 E.00503 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.294 Y-14.029 F30000 ;TYPE:Gap infill ;WIDTH:0.589882 G1 F3121 G1 X7.794 Y-14.029 E.06686 G1 X3.128 Y-14.451 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.432571 G1 F3121 G1 X6.302 Y-11.277 E.1425 G1 X6.302 Y-11.148 E.00411 G1 X5.88 Y-11.148 E.01339 G1 X3.298 Y-13.73 E.11594 G1 X3.298 Y-13.179 E.0175 G1 X5.329 Y-11.148 E.0912 G1 X4.778 Y-11.148 E.0175 G1 X3.298 Y-12.628 E.06645 G1 X3.298 Y-12.077 E.0175 G1 X4.227 Y-11.148 E.04171 G1 X3.676 Y-11.148 E.0175 G1 X3.128 Y-11.696 E.02459 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.676 Y-11.148 G1 X4.227 Y-11.148 G1 X3.75 Y-11.625 ;WIPE_END G1 X3.661 Y-3.993 Z39 F30000 G1 X3.498 Y9.952 Z39 G1 Z38.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3121 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3121 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3121 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z39 F30000 G1 X3.498 Y40.31 Z39 G1 Z38.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3121 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3121 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3121 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z39 F30000 G1 X33.195 Y40.745 Z39 G1 Z38.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3121 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3121 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3121 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:38.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;38.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;38.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z39.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z39.2 G1 Z38.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3208 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3208 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z39.2 F30000 G1 X3.498 Y-10.952 Z39.2 G1 Z38.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3208 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-14.714 E.25748 G1 X7.998 Y-14.714 E.16241 G1 X7.998 Y-13.552 E.03855 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3208 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-14.658 E.26066 G1 X2.695 Y-15.121 E.01536 G1 F2340 G1 X3.158 Y-15.121 E.01536 G1 X7.942 Y-15.121 E.15869 G1 X8.405 Y-15.121 E.01536 G1 F3208 G1 X8.405 Y-13.145 E.06555 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3208 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-14.718 E.24514 G1 F2340 G1 X2.26 Y-15.556 E.02575 G1 X8.84 Y-15.556 E.20219 M106 S255 G1 X8.84 Y-14.718 E.02575 G1 F3208 G1 X8.84 Y-13.34 E.04234 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.174 Y-10.993 Z39.2 F30000 G1 Z38.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.432571 G1 F3208 G1 X6.681 Y-14.5 E.15748 G1 X6.13 Y-14.5 E.0175 G1 X3.316 Y-11.686 E.12636 G1 X3.316 Y-12.237 E.0175 G1 X5.579 Y-14.5 E.10162 G1 X5.028 Y-14.5 E.0175 G1 X3.316 Y-12.788 E.07688 G1 X3.316 Y-13.339 E.0175 G1 X4.477 Y-14.5 E.05213 G1 X4.058 Y-14.5 E.01328 G1 X4.041 Y-14.518 E.00079 G1 X3.943 Y-14.518 E.00311 G1 X3.129 Y-13.704 E.03655 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-14.428 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3208 G1 X3.383 Y-14.391 E.00204 G1 X3.448 Y-14.356 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.420202 G1 F3208 G1 X7.606 Y-14.322 E.0116 G1 X6.991 Y-14.322 E.01889 G1 X6.614 Y-13.944 E.0164 G1 X7.566 Y-13.944 E.02926 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.705 Y-11.745 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.467162 G1 F3208 G1 X5.705 Y-12.469 E.02504 G1 X4.981 Y-11.745 E.03541 G1 X5.665 Y-11.745 E.02365 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3208 G1 X6.106 Y-13.436 E.06429 G1 X4.014 Y-11.344 E.09091 G1 X6.066 Y-11.344 E.06306 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.066 Y-11.344 ;WIPE_END G1 X3.862 Y-3.714 Z39.2 F30000 G1 X3.498 Y9.952 Z39.2 G1 Z38.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3208 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3208 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3208 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z39.2 F30000 G1 X3.498 Y40.31 Z39.2 G1 Z38.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3208 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3208 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 M73 P60 R42 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3208 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z39.2 F30000 G1 X33.195 Y40.745 Z39.2 G1 Z38.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3208 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3208 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3208 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:39 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;39 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;39 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z39.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z39.4 G1 Z39 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3268 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3268 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z39.4 F30000 G1 X3.498 Y-10.952 Z39.4 G1 Z39 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3268 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-14.921 E.26435 G1 X7.998 Y-14.921 E.16241 G1 X7.998 Y-13.552 E.04541 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3268 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-14.866 E.26756 G1 X2.695 Y-15.328 E.01533 G1 F2220 G1 X3.158 Y-15.328 E.01536 G1 X7.942 Y-15.328 E.15869 G1 X8.405 Y-15.328 E.01536 G1 F3268 G1 X8.405 Y-14.866 E.01533 G1 X8.405 Y-13.4 E.04863 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3268 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-14.926 E.25153 G1 F2220 G1 X2.26 Y-15.763 E.02572 G1 X8.84 Y-15.763 E.20219 M106 S255 G1 X8.84 Y-14.926 E.02572 G1 F3268 G1 X8.84 Y-13.34 E.04873 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-11.642 Z39.4 F30000 G1 Z39 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.430775 G1 F3268 G1 X3.389 Y-14.725 E.1378 G1 X3.298 Y-14.725 E.00286 G1 X3.298 Y-14.267 E.01448 G1 X6.302 Y-11.263 E.13426 G1 X6.302 Y-11.148 E.00365 G1 X5.869 Y-11.148 E.01369 G1 X3.298 Y-13.719 E.1149 G1 X3.298 Y-13.17 E.01734 G1 X5.32 Y-11.148 E.09038 G1 X4.772 Y-11.148 E.01734 G1 X3.298 Y-12.622 E.06586 G1 X3.298 Y-12.073 E.01734 G1 X4.223 Y-11.148 E.04135 G1 X3.675 Y-11.148 E.01734 G1 X3.128 Y-11.694 E.02442 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-12.496 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3268 G1 X6.106 Y-13.756 E.03872 ;WIDTH:0.437333 G1 X6.155 Y-13.836 E.00302 ;WIDTH:0.472001 G1 X6.204 Y-13.916 E.00329 ;WIDTH:0.523482 G1 X6.254 Y-13.996 E.00369 G1 X7.554 Y-13.996 E.05092 G1 X7.554 Y-14.477 E.01884 G1 X6.294 Y-14.477 E.04932 ;WIDTH:0.506669 G1 X6.037 Y-14.495 E.00973 ;WIDTH:0.472001 G1 X5.781 Y-14.512 E.009 ;WIDTH:0.421963 G1 X5.524 Y-14.529 E.00795 G1 X4.072 Y-14.529 E.04483 G1 X6.078 Y-12.524 E.08759 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.711 Y-13.449 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.455588 G1 F3268 G1 X5.725 Y-13.883 E.0146 G1 X5.988 Y-14.134 E.01224 G1 X5.026 Y-14.134 E.03238 G1 X5.683 Y-13.477 E.03125 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.026 Y-14.134 G1 X5.988 Y-14.134 G1 X5.91 Y-14.06 ;WIPE_END G1 X5.147 Y-6.466 Z39.4 F30000 G1 X3.498 Y9.952 Z39.4 G1 Z39 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3268 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3268 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3268 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z39.4 F30000 G1 X3.498 Y40.31 Z39.4 G1 Z39 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3268 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3268 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3268 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z39.4 F30000 G1 X33.195 Y40.745 Z39.4 G1 Z39 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3268 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3268 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3268 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:39.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;39.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;39.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z39.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z39.6 G1 Z39.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z39.6 F30000 G1 X3.498 Y-10.952 Z39.6 G1 Z39.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.129 E.27125 G1 X7.998 Y-15.129 E.16241 G1 X7.998 Y-13.552 E.05231 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-15.073 E.27443 G1 F2400 G1 X2.695 Y-15.536 E.01536 G1 F2100 G1 X3.158 Y-15.536 E.01536 G1 X7.942 Y-15.536 E.15869 G1 X8.405 Y-15.536 E.01536 G1 F2400 G1 X8.405 Y-15.073 E.01536 G1 F3342 G1 X8.405 Y-13.4 E.0555 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-15.133 E.25789 G1 F2100 G1 X2.26 Y-15.971 E.02575 G1 X8.84 Y-15.971 E.20219 M106 S255 G1 X8.84 Y-15.133 E.02575 M73 P61 R42 G1 F3342 G1 X8.84 Y-13.34 E.05509 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.446 Y-14.843 Z39.6 F30000 G1 Z39.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F3342 G1 X3.383 Y-14.806 E.00204 G1 X3.448 Y-14.771 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.357 Y-15.057 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.430775 G1 F3342 G1 X3.448 Y-11.148 E.1747 G1 X3.392 Y-11.148 E.00178 G1 X3.316 Y-11.462 E.0102 G1 X3.316 Y-11.564 E.00323 G1 X6.667 Y-14.915 E.14979 G1 X6.118 Y-14.915 E.01734 G1 X3.316 Y-12.113 E.12527 G1 X3.316 Y-12.661 E.01734 G1 X5.57 Y-14.915 E.10075 G1 X5.021 Y-14.915 E.01734 G1 X3.316 Y-13.21 E.07624 G1 X3.316 Y-13.758 E.01734 G1 X4.473 Y-14.915 E.05172 G1 X4.058 Y-14.915 E.0131 G1 X4.041 Y-14.933 E.00078 G1 X3.942 Y-14.933 E.00313 G1 X3.129 Y-14.12 E.03635 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.572 Y-13.978 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.487475 G1 F3342 G1 X7.572 Y-14.679 E.02541 G1 X7.538 Y-14.703 E.0015 G1 X6.813 Y-13.978 E.03715 G1 X7.532 Y-13.978 E.02604 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.722 Y-11.728 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.432579 G1 F3342 G1 X5.722 Y-12.393 E.02112 G1 X5.057 Y-11.728 E.02987 G1 X5.682 Y-11.728 E.01985 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3342 G1 X6.106 Y-13.318 E.06066 G1 X4.132 Y-11.344 E.08578 G1 X6.066 Y-11.344 E.05943 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.132 Y-11.344 G1 X4.178 Y-11.391 ;WIPE_END G1 X3.935 Y-3.762 Z39.6 F30000 G1 X3.498 Y9.952 Z39.6 G1 Z39.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z39.6 F30000 G1 X3.498 Y40.31 Z39.6 G1 Z39.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z39.6 F30000 G1 X33.195 Y40.745 Z39.6 G1 Z39.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3342 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:39.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;39.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;39.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z39.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z39.8 G1 Z39.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3081 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3081 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z39.8 F30000 G1 X3.498 Y-10.952 Z39.8 G1 Z39.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3081 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.337 E.27815 G1 X7.998 Y-15.337 E.16241 G1 X7.998 Y-13.552 E.05921 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3081 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-15.281 E.28133 G1 F2280 G1 X2.695 Y-15.744 E.01536 G1 F1980 G1 X3.158 Y-15.744 E.01536 G1 X7.942 Y-15.744 E.15869 G1 X8.405 Y-15.744 E.01536 G1 F2280 G1 X8.405 Y-15.281 E.01536 G1 F3081 G1 X8.405 Y-13.4 E.0624 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3081 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-15.341 E.26428 G1 F1980 G1 X2.26 Y-16.179 E.02575 G1 X8.84 Y-16.179 E.20219 M106 S255 G1 X8.84 Y-15.341 E.02575 G1 F3081 G1 X8.84 Y-13.34 E.06149 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.017 Y-11.163 Z39.8 F30000 G1 Z39.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3081 G1 X5.646 Y-11.163 E.05401 G1 X5.46 Y-11.881 E.02459 G3 X4.429 Y-13.191 I8.488 J-7.742 E.05537 G3 X4.51 Y-14.423 I1.406 J-.526 E.04222 G1 X7.039 Y-14.423 E.08388 G1 X6.984 Y-13.763 E.02198 G1 X6.287 Y-13.763 E.02313 G1 X6.287 Y-12.832 E.03088 G1 X3.559 Y-14.88 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.548878 G1 F3081 G1 X7.501 Y-14.88 E.16256 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.501 Y-14.88 ;WIPE_END G1 X4.888 Y-7.272 Z39.8 F30000 G1 X3.498 Y9.952 Z39.8 G1 Z39.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3081 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3081 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3081 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z39.8 F30000 G1 X3.498 Y40.31 Z39.8 G1 Z39.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3081 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3081 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3081 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z39.8 F30000 G1 X33.195 Y40.745 Z39.8 G1 Z39.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3081 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3081 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3081 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:39.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;39.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;39.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z40 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z40 G1 Z39.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3134 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3134 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z40 F30000 G1 X3.498 Y-10.952 Z40 G1 Z39.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3134 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.544 E.28501 G1 F2520 G1 X7.998 Y-15.544 E.16241 G1 F3134 G1 X7.998 Y-13.552 E.06608 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3134 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-15.489 E.28823 G1 F2160 G1 X2.695 Y-15.951 E.01533 G1 F1860 G1 X3.158 Y-15.951 E.01536 G1 X7.942 Y-15.951 E.15869 G1 X8.405 Y-15.951 E.01536 G1 F2160 G1 X8.405 Y-15.489 E.01533 G1 F3134 G1 X8.405 Y-13.4 E.0693 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3134 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-15.549 E.27068 G1 F1860 G1 X2.26 Y-16.386 E.02572 G1 X8.84 Y-16.386 E.20219 M106 S255 G1 X8.84 Y-15.549 E.02572 G1 F3134 G1 X8.84 Y-13.34 E.06788 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.052 Y-11.163 Z40 F30000 G1 Z39.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3134 G1 X5.68 Y-11.163 E.05401 G1 X5.362 Y-11.881 E.02604 G3 X4.411 Y-12.864 I4.411 J-5.223 E.04545 G1 X4.286 Y-13.191 E.01162 G3 X4.764 Y-14.631 I2.045 J-.12 E.05155 G1 X6.956 Y-14.631 E.07271 G1 X6.907 Y-14.501 E.0046 G1 X6.976 Y-13.763 E.0246 G1 X6.287 Y-13.763 E.02287 G1 X6.287 Y-12.824 E.03114 G1 X3.559 Y-15.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.548878 G1 F3134 G1 X7.501 Y-15.088 E.16256 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.501 Y-15.088 ;WIPE_END G1 X4.893 Y-7.479 Z40 F30000 G1 X3.498 Y9.952 Z40 G1 Z39.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3134 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3134 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3134 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z40 F30000 G1 X3.498 Y40.31 Z40 G1 Z39.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3134 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3134 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3134 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z40 F30000 G1 X33.195 Y40.745 Z40 G1 Z39.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3134 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3134 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3134 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:39.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;39.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;39.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z40.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z40.2 G1 Z39.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3147 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3147 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z40.2 F30000 G1 X3.498 Y-10.952 Z40.2 G1 Z39.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3147 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.648 E.28846 G1 F3060 G1 X7.998 Y-15.648 E.16241 G1 F3147 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3147 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 F1920 G1 X8.405 Y-16.055 E.18941 G1 F3147 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3147 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-15.756 E.27704 G1 F1860 G1 X2.26 Y-16.49 E.02255 G1 F1620 G1 X2.994 Y-16.49 E.02255 G1 X8.106 Y-16.49 E.15708 G1 X8.84 Y-16.49 E.02255 M106 S255 G1 F1860 G1 X8.84 Y-15.756 E.02255 G1 F3147 G1 X8.84 Y-13.34 E.07424 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.115 Y-11.163 Z40.2 F30000 G1 Z39.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3147 G1 X5.743 Y-11.163 E.05401 G1 X5.278 Y-11.881 E.02838 G1 X4.388 Y-12.536 E.03664 G3 X4.103 Y-13.191 I.422 J-.574 E.02484 G3 X5.173 Y-14.839 I2.364 J.364 E.06716 G1 X6.77 Y-14.839 E.05297 G1 X6.723 Y-14.501 E.01129 G1 X6.943 Y-13.763 E.02555 G1 X6.287 Y-13.763 E.02177 G1 X6.287 Y-12.791 E.03225 G1 X3.507 Y-15.243 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.44508 G1 F3147 G1 X7.553 Y-15.243 E.13261 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.553 Y-15.243 ;WIPE_END G1 X4.933 Y-7.636 Z40.2 F30000 G1 X3.498 Y9.952 Z40.2 G1 Z39.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3147 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3147 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3147 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z40.2 F30000 G1 X3.498 Y40.31 Z40.2 G1 Z39.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3147 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3147 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3147 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z40.2 F30000 G1 X33.195 Y40.745 Z40.2 G1 Z39.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3147 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3147 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3147 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:40 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;40 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;40 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z40.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z40.4 G1 Z40 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3153 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3153 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z40.4 F30000 G1 X3.498 Y-10.952 Z40.4 G1 Z40 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3153 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3153 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 F2160 G1 X8.405 Y-16.055 E.18941 G1 F3153 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3153 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 F1560 G1 X8.84 Y-16.49 E.20219 G1 F3153 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.287 Y-12.316 Z40.4 F30000 G1 Z40 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3153 G1 X6.287 Y-11.163 E.03825 G1 X5.812 Y-11.163 E.01576 G2 X4.341 Y-12.271 I-1.979 J1.097 E.06289 G2 X3.686 Y-12.199 I-.275 J.514 E.02324 G1 X3.313 Y-11.513 E.0259 G1 X3.313 Y-12.744 E.04083 G1 X3.686 Y-12.873 E.0131 G1 X4.341 Y-14.078 E.04548 G3 X5.652 Y-14.892 I1.907 J1.608 E.05202 G3 X6.307 Y-14.819 I.275 J.514 E.02324 G1 X6.882 Y-13.763 E.03988 G1 X7.787 Y-13.763 E.03003 G1 X7.787 Y-15.437 E.05552 G1 X7 Y-15.437 E.0261 G3 X6.442 Y-15.437 I-.279 J-.717 E.01895 G1 X4.813 Y-15.437 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X6.442 Y-15.437 G1 X6.635 Y-15.355 G1 X6.793 Y-15.391 ;WIPE_END G1 X5.809 Y-7.822 Z40.4 F30000 G1 X3.498 Y9.952 Z40.4 G1 Z40 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F3153 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3153 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3153 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z40.4 F30000 G1 X3.498 Y40.31 Z40.4 G1 Z40 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3153 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3153 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3153 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z40.4 F30000 G1 X33.195 Y40.745 Z40.4 G1 Z40 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3153 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3153 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3153 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:40.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;40.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;40.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z40.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z40.6 G1 Z40.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3041 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3041 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z40.6 F30000 G1 X3.498 Y-10.952 Z40.6 G1 Z40.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3041 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3041 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3041 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 F1920 G1 X8.84 Y-16.49 E.20219 G1 F3041 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.287 Y-12.462 Z40.6 F30000 G1 Z40.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3041 G1 X6.287 Y-11.163 E.0431 G1 X5.958 Y-11.163 E.01091 G2 X4.014 Y-11.974 I-1.539 J.954 E.07457 G2 X3.313 Y-11.259 I1.34 J2.014 E.03346 G1 X3.313 Y-13.087 E.06066 G1 X3.359 Y-13.098 E.00155 G2 X4.341 Y-14.156 I-2.01 J-2.852 E.04825 G3 X5.979 Y-14.595 I1.258 J1.419 E.05832 G3 X6.776 Y-13.763 I-1.568 J2.299 E.03848 G1 X7.787 Y-13.763 E.03354 G1 X7.787 Y-14.38 E.02048 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X7.787 Y-13.763 G1 X6.776 Y-13.763 G1 X6.54 Y-14.05 ;WIPE_END G1 X5.58 Y-6.478 Z40.6 F30000 G1 X3.498 Y9.952 Z40.6 G1 Z40.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F3041 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3041 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3041 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z40.6 F30000 G1 X3.498 Y40.31 Z40.6 G1 Z40.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3041 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3041 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3041 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z40.6 F30000 G1 X33.195 Y40.745 Z40.6 G1 Z40.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3041 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3041 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3041 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:40.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;40.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;40.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z40.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z40.8 G1 Z40.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3020 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3020 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z40.8 F30000 G1 X3.498 Y-10.952 Z40.8 G1 Z40.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3020 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3020 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3020 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 F2280 G1 X8.84 Y-16.49 E.20219 G1 F3020 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.287 Y-12.638 Z40.8 F30000 G1 Z40.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3020 G1 X6.287 Y-11.163 E.04893 G1 X6.134 Y-11.163 E.00508 G2 X4.014 Y-11.736 I-1.403 J.985 E.07905 G3 X3.313 Y-11.163 I-2.295 J-2.092 E.03013 G1 X3.313 Y-13.316 E.07141 G2 X4.341 Y-14.245 I-4.287 J-5.78 E.04604 G3 X5.979 Y-14.356 I.923 J1.47 E.05673 G3 X6.633 Y-13.763 I-5.337 J6.532 E.02929 G1 X7.787 Y-13.763 E.03829 G1 X7.787 Y-14.237 E.01572 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X7.787 Y-13.763 G1 X6.633 Y-13.763 G1 X6.357 Y-14.013 ;WIPE_END G1 X5.453 Y-6.434 Z40.8 F30000 G1 X3.498 Y9.952 Z40.8 G1 Z40.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F3020 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 M73 P61 R41 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3020 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3020 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z40.8 F30000 G1 X3.498 Y40.31 Z40.8 G1 Z40.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3020 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3020 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3020 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z40.8 F30000 G1 X33.195 Y40.745 Z40.8 G1 Z40.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3020 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3020 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3020 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:40.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;40.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;40.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z41 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z41 G1 Z40.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3158 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3158 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z41 F30000 G1 X3.498 Y-10.952 Z41 G1 Z40.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3158 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3158 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3158 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.204 Y-11.265 Z41 F30000 G1 Z40.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F3158 G1 X6.204 Y-13.756 E.06901 G1 X6.223 Y-13.846 E.00256 G1 X7.613 Y-13.846 E.03853 G1 X7.704 Y-13.865 E.00256 G1 X7.704 Y-15.263 E.03874 G1 X7.685 Y-15.354 E.00256 G1 X3.487 Y-15.354 E.11632 G1 X3.396 Y-15.335 E.00256 G1 X3.396 Y-11.337 E.11078 G1 X3.415 Y-11.246 E.00256 G1 X6.165 Y-11.257 E.07619 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.69 Y-12.791 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3158 G1 X3.69 Y-11.54 E.04147 G1 X4.068 Y-11.54 E.01254 G3 X5.652 Y-11.728 I.934 J1.11 E.056 G1 X5.91 Y-11.54 E.01058 G1 X5.91 Y-14.14 E.08625 G1 X5.952 Y-14.14 E.00139 G2 X4.341 Y-14.348 I-.96 J1.094 E.05714 G1 X3.69 Y-13.829 E.02762 G1 X3.69 Y-15.06 E.04082 G1 X4.088 Y-15.06 E.0132 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X3.69 Y-15.06 G1 X3.69 Y-13.829 G1 X3.981 Y-14.061 ;WIPE_END G1 X3.827 Y-6.43 Z41 F30000 G1 X3.498 Y9.952 Z41 G1 Z40.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F3158 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3158 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3158 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z41 F30000 G1 X3.498 Y40.31 Z41 G1 Z40.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3158 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3158 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3158 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z41 F30000 G1 X33.195 Y40.745 Z41 G1 Z40.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3158 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3158 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3158 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:40.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;40.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;40.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z41.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z41.2 G1 Z40.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3379 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3379 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z41.2 F30000 G1 X3.498 Y-10.952 Z41.2 G1 Z40.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3379 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3379 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3379 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.132 Y-12.019 Z41.2 F30000 G1 Z40.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X3.778 Y-11.185 E.054 G1 X4.347 Y-11.185 E.02914 G1 X3.335 Y-12.492 E.08466 G1 X3.335 Y-13.227 E.03764 G1 X4.916 Y-11.185 E.13226 G1 X5.485 Y-11.185 E.02914 G1 X3.335 Y-13.962 E.17986 G1 X3.335 Y-14.698 E.03764 G1 X6.054 Y-11.185 E.22746 G1 X6.265 Y-11.185 E.01083 G1 X6.265 Y-11.646 E.02365 G1 X3.348 Y-15.415 E.24403 G1 X3.917 Y-15.415 E.02914 G1 X6.265 Y-12.382 E.19643 G1 X6.265 Y-13.117 E.03764 G1 X4.486 Y-15.415 E.14883 G1 X5.055 Y-15.415 E.02914 G1 X6.318 Y-13.785 E.10559 G1 X6.887 Y-13.785 E.02914 G1 X5.624 Y-15.415 E.10559 G1 X6.193 Y-15.415 E.02914 G1 X7.456 Y-13.785 E.10559 G1 X7.765 Y-13.785 E.01586 G1 X7.765 Y-14.12 E.01716 G1 X6.762 Y-15.415 E.0839 G1 X7.331 Y-15.415 E.02914 G1 X7.968 Y-14.593 E.05324 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X7.331 Y-15.415 G1 X6.762 Y-15.415 G1 X7.002 Y-15.106 ;WIPE_END G1 X5.945 Y-7.547 Z41.2 F30000 G1 X3.498 Y9.952 Z41.2 G1 Z40.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 ;HEIGHT:0.2 G1 F3379 M106 S255 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3379 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3379 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z41.2 F30000 G1 X3.498 Y40.31 Z41.2 G1 Z40.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3379 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3379 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 M73 P62 R41 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3379 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z41.2 F30000 G1 X33.195 Y40.745 Z41.2 G1 Z40.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3379 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3379 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3379 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:41 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;41 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;41 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z41.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z41.4 G1 Z41 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z41.4 F30000 G1 X3.498 Y-10.952 Z41.4 G1 Z41 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3335 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-13.244 Z41.4 F30000 G1 Z41 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3335 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3335 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3335 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G1 X5.647 Y-7.26 Z41.4 F30000 G1 X3.498 Y9.952 Z41.4 G1 Z41 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3335 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z41.4 F30000 G1 X3.498 Y40.31 Z41.4 G1 Z41 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3335 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z41.4 F30000 G1 X33.195 Y40.745 Z41.4 G1 Z41 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3335 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:41.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;41.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;41.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z41.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z41.6 G1 Z41.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z41.6 F30000 G1 X3.498 Y-10.952 Z41.6 G1 Z41.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z41.6 F30000 G1 Z41.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3325 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3325 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3325 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G1 X3.462 Y-7.729 Z41.6 F30000 G1 X3.498 Y9.952 Z41.6 G1 Z41.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z41.6 F30000 G1 X3.498 Y40.31 Z41.6 G1 Z41.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z41.6 F30000 G1 X33.195 Y40.745 Z41.6 G1 Z41.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3325 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:41.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;41.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;41.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z41.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z41.8 G1 Z41.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z41.8 F30000 G1 X3.498 Y-10.952 Z41.8 G1 Z41.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-13.244 Z41.8 F30000 G1 Z41.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3323 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3323 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3323 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G1 X5.647 Y-7.26 Z41.8 F30000 G1 X3.498 Y9.952 Z41.8 G1 Z41.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z41.8 F30000 G1 X3.498 Y40.31 Z41.8 G1 Z41.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z41.8 F30000 G1 X33.195 Y40.745 Z41.8 G1 Z41.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3323 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:41.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;41.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;41.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z42 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z42 G1 Z41.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z42 F30000 G1 X3.498 Y-10.952 Z42 G1 Z41.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3387 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X7.563 Y-13.578 Z42 F30000 G1 Z41.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.443531 G1 F3387 G1 X7.972 Y-13.987 E.01887 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.554 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X6.996 Y-13.578 E.04503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.972 Y-14.554 ;WIPE_END G1 X6.472 Y-11.921 Z42 F30000 G1 Z41.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X5.659 Y-11.108 E.0375 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.093 Y-11.108 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X6.472 Y-12.487 E.06365 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.054 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X4.526 Y-11.108 E.08981 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.96 Y-11.108 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X7.972 Y-15.12 E.18521 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.906 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.393 Y-11.108 E.20836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-11.41 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X7.34 Y-15.622 E.19442 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.773 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.128 Y-11.977 E.16827 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-12.543 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X6.207 Y-15.622 E.14211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.64 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.128 Y-13.11 E.11596 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-13.676 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X5.074 Y-15.622 E.0898 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.507 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.128 Y-14.243 E.06365 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-14.81 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.94 Y-15.622 E.03749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.128 Y-14.81 ;WIPE_END G1 X3.242 Y-7.178 Z42 F30000 G1 X3.498 Y9.952 Z42 G1 Z41.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3387 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z42 F30000 G1 X3.498 Y40.31 Z42 G1 Z41.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3387 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z42 F30000 G1 X33.195 Y40.745 Z42 G1 Z41.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3387 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:41.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;41.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;41.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z42.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z42.2 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z42.2 F30000 G1 X3.498 Y-10.952 Z42.2 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.019 E.16808 G1 X6.498 Y-12.019 E.11265 G1 X6.498 Y-10.952 E.0354 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.426 E.19509 G1 X6.905 Y-12.426 E.13965 G1 X6.905 Y-10.545 E.0624 G1 X3.945 Y-10.545 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.925 Y-8.545 ;WIPE_END G1 X3.102 Y-15.381 Z42.2 F30000 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.102 Y-15.648 E.00886 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-15.381 E.00886 G1 X3.142 Y-15.381 E.16108 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-14.974 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X2.695 Y-16.055 E.03587 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-14.974 E.03587 G1 X2.735 Y-14.974 E.18808 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y-16.055 G1 X3.613 Y-16.055 ;WIPE_END G1 X4.34 Y-10.11 Z42.2 F30000 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.861 E.20745 G1 X8.76 Y-12.861 E.19973 G1 X8.76 Y-14.539 E.05155 G1 X2.26 Y-14.539 E.19973 G1 X2.26 Y-16.49 E.05996 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.129 Y-11.321 Z42.2 F30000 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.372919 G1 F3163 G1 X6.129 Y-11.651 E.00887 G1 X3.471 Y-11.651 E.0715 G1 X3.471 Y-11.321 E.00887 G1 X6.089 Y-11.321 E.07042 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.089 Y-11.321 ;WIPE_END G1 X3.877 Y-3.691 Z42.2 F30000 G1 X3.498 Y9.952 Z42.2 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z42.2 F30000 G1 X3.498 Y40.31 Z42.2 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z42.2 F30000 G1 X33.195 Y40.745 Z42.2 G1 Z41.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3163 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:42 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;42 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;42 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z42.4 I1.216 J-.056 P1 F30000 M73 P62 R40 G1 X31.195 Y-10.545 Z42.4 G1 Z42 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3028 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3028 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z42.4 F30000 G1 X3.498 Y-10.952 Z42.4 G1 Z42 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3028 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.802 E.16088 G1 X6.498 Y-11.802 E.11265 G1 X6.498 Y-10.952 E.02819 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3028 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.209 E.18788 G1 X6.905 Y-12.209 E.13965 G1 X6.905 Y-10.545 E.0552 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3028 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.644 E.20077 G1 X7.34 Y-12.644 E.15609 G1 X7.34 Y-10.11 E.07786 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.095 Y-14.766 Z42.4 F30000 G1 X8.405 Y-15.318 Z42.4 G1 Z42 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3028 G1 X8.405 Y-15.191 E.0042 G1 X2.695 Y-15.191 E.18941 G1 X2.695 Y-16.055 E.02866 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.358 E.02314 G1 X8.76 Y-14.756 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3028 G1 X2.26 Y-14.756 E.19973 G1 X2.26 Y-16.49 E.05328 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.716 E.06164 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.76 Y-14.728 ;WIPE_END G1 X8.201 Y-15.623 Z42.4 F30000 G1 Z42 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.499774 G1 F3028 G1 X2.899 Y-15.623 E.19742 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.623 ;WIPE_END G1 X3.306 Y-11.377 Z42.4 F30000 G1 Z42 G1 E.8 F1800 ;WIDTH:0.485618 G1 F3028 G1 X6.294 Y-11.377 E.10782 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.377 ;WIPE_END G1 X4.01 Y-3.75 Z42.4 F30000 G1 X3.498 Y9.952 Z42.4 G1 Z42 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3028 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3028 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3028 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z42.4 F30000 G1 X3.498 Y40.648 Z42.4 G1 Z42 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3028 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3028 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3028 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z42.4 F30000 G1 X33.195 Y40.745 Z42.4 G1 Z42 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3028 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3028 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3028 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:42.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;42.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;42.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z42.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z42.6 G1 Z42.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z42.6 F30000 G1 X3.498 Y-10.952 Z42.6 G1 Z42.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.671 E.15652 G1 X6.498 Y-11.671 E.11265 G1 X6.498 Y-10.952 E.02384 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3016 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.078 E.18353 G1 X6.905 Y-12.078 E.13965 G1 X6.905 Y-10.545 E.05084 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.513 E.19674 G1 X7.34 Y-12.513 E.15609 G1 X7.34 Y-10.11 E.07383 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.044 Y-14.794 Z42.6 F30000 G1 X8.405 Y-15.449 Z42.6 G1 Z42.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X8.405 Y-15.322 E.0042 G1 X2.695 Y-15.322 E.18941 G1 X2.695 Y-16.055 E.02431 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.489 E.01878 G1 X8.76 Y-14.887 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X2.26 Y-14.887 E.19973 G1 X2.26 Y-16.49 E.04925 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.847 E.06567 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.76 Y-14.86 ;WIPE_END G1 X8.201 Y-15.689 Z42.6 F30000 G1 Z42.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.368556 G1 F3016 G1 X2.899 Y-15.689 E.14071 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.689 ;WIPE_END G1 X3.306 Y-11.311 Z42.6 F30000 G1 Z42.2 G1 E.8 F1800 ;WIDTH:0.3544 G1 F3016 G1 X6.294 Y-11.311 E.07586 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.311 ;WIPE_END G1 X4.009 Y-3.684 Z42.6 F30000 G1 X3.498 Y9.952 Z42.6 G1 Z42.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3016 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z42.6 F30000 G1 X3.498 Y40.648 Z42.6 G1 Z42.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3016 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z42.6 F30000 G1 X33.195 Y40.745 Z42.6 G1 Z42.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3016 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:42.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;42.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;42.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z42.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z42.8 G1 Z42.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z42.8 F30000 G1 X3.498 Y-10.952 Z42.8 G1 Z42.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.591 E.15387 G1 X6.498 Y-11.591 E.11265 G1 X6.498 Y-10.952 E.02118 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2962 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.998 E.18088 G1 X6.905 Y-11.998 E.13965 G1 X6.905 Y-10.545 E.04819 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.433 E.19428 G1 X7.34 Y-12.433 E.15609 G1 X7.34 Y-10.11 E.07137 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.014 Y-14.811 Z42.8 F30000 G1 X8.405 Y-15.529 Z42.8 G1 Z42.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X8.405 Y-15.402 E.0042 G1 X2.695 Y-15.402 E.18941 G1 X2.695 Y-16.055 E.02165 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.569 E.01613 G1 X8.76 Y-14.967 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X2.26 Y-14.967 E.19973 G1 X2.26 Y-16.49 E.04679 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.927 E.06813 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.201 Y-15.729 F30000 ;TYPE:Gap infill ;WIDTH:0.288516 G1 F2962 G1 X2.899 Y-15.729 E.10613 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.729 ;WIPE_END G1 X3.306 Y-11.271 Z42.8 F30000 G1 Z42.4 G1 E.8 F1800 ;WIDTH:0.274362 G1 F2962 G1 X6.294 Y-11.271 E.05637 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.271 ;WIPE_END G1 X4.008 Y-3.644 Z42.8 F30000 G1 X3.498 Y9.952 Z42.8 G1 Z42.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2962 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z42.8 F30000 G1 X3.498 Y40.648 Z42.8 G1 Z42.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2962 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z42.8 F30000 G1 X33.195 Y40.745 Z42.8 G1 Z42.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2962 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:42.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;42.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;42.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z43 I1.216 J-.056 P1 F30000 M73 P63 R40 G1 X31.195 Y-10.545 Z43 G1 Z42.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z43 F30000 G1 X3.498 Y-10.952 Z43 G1 Z42.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.554 E.15267 G1 X6.498 Y-11.554 E.11265 G1 X6.498 Y-10.952 E.01998 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2958 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.962 E.17968 G1 X6.905 Y-11.962 E.13965 G1 X6.905 Y-10.545 E.04699 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.397 E.19317 G1 X7.34 Y-12.397 E.15609 G1 X7.34 Y-10.11 E.07026 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8 Y-14.819 Z43 F30000 G1 X8.405 Y-15.565 Z43 G1 Z42.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X8.405 Y-15.438 E.0042 G1 X2.695 Y-15.438 E.18941 G1 X2.695 Y-16.055 E.02045 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.605 E.01493 G1 X8.76 Y-15.003 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X2.26 Y-15.003 E.19973 G1 X2.26 Y-16.49 E.04568 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.963 E.06924 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.201 Y-15.747 F30000 ;TYPE:Gap infill ;WIDTH:0.252394 G1 F2958 G1 X2.899 Y-15.747 E.09052 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.747 ;WIPE_END G1 X3.306 Y-11.253 Z43 F30000 G1 Z42.6 G1 E.8 F1800 ;WIDTH:0.238238 G1 F2958 G1 X6.294 Y-11.253 E.04757 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.253 ;WIPE_END G1 X4.008 Y-3.626 Z43 F30000 G1 X3.498 Y9.952 Z43 G1 Z42.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2958 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z43 F30000 G1 X3.498 Y40.648 Z43 G1 Z42.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2958 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z43 F30000 G1 X33.195 Y40.745 Z43 G1 Z42.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2958 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:42.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;42.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;42.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z43.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z43.2 G1 Z42.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z43.2 F30000 G1 X3.498 Y-10.952 Z43.2 G1 Z42.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.554 E.15267 G1 X6.498 Y-11.554 E.11265 G1 X6.498 Y-10.952 E.01998 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2958 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.962 E.17968 G1 X6.905 Y-11.962 E.13965 G1 X6.905 Y-10.545 E.04699 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.397 E.19317 G1 X7.34 Y-12.397 E.15609 G1 X7.34 Y-10.11 E.07026 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8 Y-14.819 Z43.2 F30000 G1 X8.405 Y-15.565 Z43.2 G1 Z42.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X8.405 Y-15.438 E.0042 G1 X2.695 Y-15.438 E.18941 G1 X2.695 Y-16.055 E.02045 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.605 E.01493 G1 X8.76 Y-15.003 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X2.26 Y-15.003 E.19973 G1 X2.26 Y-16.49 E.04568 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.963 E.06924 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.201 Y-15.747 F30000 ;TYPE:Gap infill ;WIDTH:0.252394 G1 F2958 G1 X2.899 Y-15.747 E.09052 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.747 ;WIPE_END G1 X3.306 Y-11.253 Z43.2 F30000 G1 Z42.8 G1 E.8 F1800 ;WIDTH:0.238238 G1 F2958 G1 X6.294 Y-11.253 E.04757 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.253 ;WIPE_END G1 X4.008 Y-3.626 Z43.2 F30000 G1 X3.498 Y9.952 Z43.2 G1 Z42.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2958 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z43.2 F30000 G1 X3.498 Y40.648 Z43.2 G1 Z42.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2958 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z43.2 F30000 G1 X33.195 Y40.745 Z43.2 G1 Z42.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2958 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2958 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2958 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:43 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;43 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;43 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z43.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z43.4 G1 Z43 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z43.4 F30000 G1 X3.498 Y-10.952 Z43.4 G1 Z43 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.591 E.15387 G1 X6.498 Y-11.591 E.11265 G1 X6.498 Y-10.952 E.02118 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2962 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.998 E.18088 G1 X6.905 Y-11.998 E.13965 G1 X6.905 Y-10.545 E.04819 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.433 E.19428 G1 X7.34 Y-12.433 E.15609 G1 X7.34 Y-10.11 E.07137 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.014 Y-14.811 Z43.4 F30000 G1 X8.405 Y-15.529 Z43.4 G1 Z43 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X8.405 Y-15.402 E.0042 G1 X2.695 Y-15.402 E.18941 G1 X2.695 Y-16.055 E.02165 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.569 E.01613 G1 X8.76 Y-14.967 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X2.26 Y-14.967 E.19973 G1 X2.26 Y-16.49 E.04679 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.927 E.06813 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.201 Y-15.729 F30000 ;TYPE:Gap infill ;WIDTH:0.288518 G1 F2962 G1 X2.899 Y-15.729 E.10613 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.729 ;WIPE_END G1 X3.306 Y-11.271 Z43.4 F30000 G1 Z43 G1 E.8 F1800 ;WIDTH:0.274364 G1 F2962 G1 X6.294 Y-11.271 E.05637 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.271 ;WIPE_END G1 X4.008 Y-3.644 Z43.4 F30000 G1 X3.498 Y9.952 Z43.4 G1 Z43 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2962 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z43.4 F30000 G1 X3.498 Y40.648 Z43.4 G1 Z43 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2962 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z43.4 F30000 G1 X33.195 Y40.745 Z43.4 G1 Z43 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2962 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2962 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2962 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:43.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;43.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;43.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z43.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z43.6 G1 Z43.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z43.6 F30000 G1 X3.498 Y-10.952 Z43.6 G1 Z43.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.671 E.15652 G1 X6.498 Y-11.671 E.11265 G1 X6.498 Y-10.952 E.02384 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3016 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.078 E.18353 G1 X6.905 Y-12.078 E.13965 G1 X6.905 Y-10.545 E.05084 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.513 E.19674 G1 X7.34 Y-12.513 E.15609 G1 X7.34 Y-10.11 E.07383 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.044 Y-14.794 Z43.6 F30000 G1 X8.405 Y-15.449 Z43.6 G1 Z43.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X8.405 Y-15.322 E.0042 G1 X2.695 Y-15.322 E.18941 G1 X2.695 Y-16.055 E.02431 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.489 E.01878 G1 X8.76 Y-14.887 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X2.26 Y-14.887 E.19973 G1 X2.26 Y-16.49 E.04925 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.847 E.06567 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.76 Y-14.86 ;WIPE_END G1 X8.201 Y-15.689 Z43.6 F30000 G1 Z43.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.368556 G1 F3016 G1 X2.899 Y-15.689 E.14071 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.689 ;WIPE_END G1 X3.306 Y-11.311 Z43.6 F30000 G1 Z43.2 G1 E.8 F1800 ;WIDTH:0.3544 G1 F3016 G1 X6.294 Y-11.311 E.07586 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.311 ;WIPE_END G1 X4.009 Y-3.684 Z43.6 F30000 G1 X3.498 Y9.952 Z43.6 G1 Z43.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3016 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z43.6 F30000 G1 X3.498 Y40.648 Z43.6 G1 Z43.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3016 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z43.6 F30000 G1 X33.195 Y40.745 Z43.6 G1 Z43.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3016 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3016 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3016 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:43.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;43.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;43.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z43.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z43.8 G1 Z43.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3039 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3039 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z43.8 F30000 G1 X3.498 Y-10.952 Z43.8 G1 Z43.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3039 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.802 E.16088 G1 X6.498 Y-11.802 E.11265 G1 X6.498 Y-10.952 E.02819 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3039 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.209 E.18788 G1 X6.905 Y-12.209 E.13965 G1 X6.905 Y-10.545 E.0552 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3039 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-11.883 E.15803 G1 X2.26 Y-12.644 E.02338 G1 X3.021 Y-12.644 E.02338 G1 X6.579 Y-12.644 E.10933 G1 X7.34 Y-12.644 E.02338 G1 X7.34 Y-11.883 E.02338 G1 X7.34 Y-10.74 E.03512 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.095 Y-14.766 Z43.8 F30000 G1 X8.405 Y-15.318 Z43.8 G1 Z43.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3039 G1 X8.405 Y-15.191 E.0042 G1 X2.695 Y-15.191 E.18941 G1 X2.695 Y-16.055 E.02866 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.358 E.02314 G1 X8.76 Y-14.756 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3039 G1 X8.144 Y-14.756 E.01893 G1 X3.021 Y-14.756 E.15742 G1 X2.26 Y-14.756 E.02338 G1 X2.26 Y-16.49 E.05328 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.76 Y-12.71 E.00246 G1 X8.76 Y-14.716 E.06164 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.76 Y-14.728 ;WIPE_END G1 X8.201 Y-15.623 Z43.8 F30000 G1 Z43.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.499778 G1 F3039 G1 X2.899 Y-15.623 E.19742 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.899 Y-15.623 ;WIPE_END G1 X3.306 Y-11.377 Z43.8 F30000 G1 Z43.4 G1 E.8 F1800 ;WIDTH:0.485622 G1 F3039 G1 X6.294 Y-11.377 E.10782 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.294 Y-11.377 ;WIPE_END G1 X4.01 Y-3.75 Z43.8 F30000 G1 X3.498 Y9.952 Z43.8 G1 Z43.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3039 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3039 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 M73 P63 R39 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3039 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z43.8 F30000 G1 X3.498 Y40.648 Z43.8 G1 Z43.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3039 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3039 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3039 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z43.8 F30000 G1 X33.195 Y40.745 Z43.8 G1 Z43.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3039 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3039 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3039 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:43.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;43.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;43.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z44 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z44 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z44 F30000 G1 X3.498 Y-10.952 Z44 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.019 E.16808 G1 X6.498 Y-12.019 E.11265 G1 X6.498 Y-10.952 E.0354 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.426 E.19509 G1 X6.905 Y-12.426 E.13965 G1 X6.905 Y-10.545 E.0624 G1 X3.945 Y-10.545 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.925 Y-8.545 ;WIPE_END G17 G3 Z44 I1.208 J-.145 P1 F30000 G1 X3.102 Y-15.381 Z44 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.102 Y-15.648 E.00886 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-15.381 E.00886 G1 X3.142 Y-15.381 E.16108 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-14.974 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X2.695 Y-16.055 E.03587 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-14.974 E.03587 G1 X2.735 Y-14.974 E.18808 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y-16.055 G1 X3.613 Y-16.055 ;WIPE_END G17 G3 Z44 I-1.208 J.148 P1 F30000 G1 X4.34 Y-10.11 Z44 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.014 E.16206 G1 F2340 G1 X2.26 Y-12.861 E.02603 G1 X8.55 Y-12.861 E.19327 M106 S255 G1 X8.76 Y-12.861 E.00645 G1 F3271 G1 X8.76 Y-14.539 E.05156 G1 F2400 G1 X8.55 Y-14.539 E.00645 G1 X2.26 Y-14.539 E.19327 M106 S255 G1 X2.26 Y-16.49 E.05995 G1 F3271 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.014 E.02139 G1 X7.34 Y-10.74 E.03915 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.129 Y-11.321 Z44 F30000 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.372922 G1 F3271 G1 X6.129 Y-11.651 E.00887 G1 X3.471 Y-11.651 E.0715 G1 X3.471 Y-11.321 E.00887 G1 X6.089 Y-11.321 E.07042 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.089 Y-11.321 ;WIPE_END G1 X3.877 Y-3.691 Z44 F30000 G1 X3.498 Y9.952 Z44 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z44 F30000 G1 X3.498 Y40.31 Z44 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z44 F30000 G1 X33.195 Y40.745 Z44 G1 Z43.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3271 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:43.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;43.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;43.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z44.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z44.2 G1 Z43.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z44.2 F30000 G1 X3.498 Y-10.952 Z44.2 G1 Z43.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-12.171 E.17312 G1 F2400 G1 X3.102 Y-13.071 E.02985 G1 F600 G1 X3.102 Y-13.271 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y-14.129 E.02846 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.102 Y-14.329 E.00663 M106 S255 G1 F2400 G1 X3.102 Y-15.648 E.04375 G1 F6716 G1 X7.998 Y-15.648 E.16241 G1 F2400 G1 X7.998 Y-14.329 E.04375 G1 F600 G1 X7.998 Y-14.129 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X7.998 Y-13.552 E.01914 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-13.271 E.00932 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X6.498 Y-13.071 E.00663 M106 S255 G1 F2400 G1 X6.498 Y-12.171 E.02985 G1 F6716 G1 X6.498 Y-10.952 E.04044 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6716 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-12.171 E.17817 G1 F2400 G1 X2.695 Y-13.071 E.02985 G1 F600 G1 X2.695 Y-13.271 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y-14.129 E.02846 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X2.695 Y-14.329 E.00663 M106 S255 G1 F2400 G1 X2.695 Y-16.055 E.05725 G1 F6716 G1 X8.405 Y-16.055 E.18941 G1 F2400 G1 X8.405 Y-14.329 E.05725 G1 F1620 G1 X8.405 Y-13.145 E.03928 G1 X6.905 Y-13.145 E.04976 M106 S255 G1 X6.905 Y-12.171 E.03231 G1 F6716 G1 X6.905 Y-10.8 E.04548 G1 X6.905 Y-10.545 E.00846 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.231 E.16872 G1 F2400 G1 X2.26 Y-13.071 E.02581 G1 F600 G1 X2.26 Y-13.271 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y-14.129 E.02846 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X2.26 Y-14.329 E.00615 M106 S255 G1 F2400 G1 X2.26 Y-15.169 E.02581 G1 F6716 G1 X2.26 Y-15.86 E.02123 G1 X2.26 Y-16.49 E.01936 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G17 G3 Z44.2 I1.114 J.491 P1 F30000 G1 X7.672 Y-15.622 Z44.2 G1 Z43.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X7.672 Y-14.329 E.03973 G1 F600 G1 X7.672 Y-13.748 E.01785 G1 X7.295 Y-13.748 E.01158 G1 X7.295 Y-14.329 E.01785 G1 F1500 G1 X7.295 Y-15.452 E.03451 G1 X6.918 Y-15.452 E.01158 G1 X6.918 Y-14.329 E.03451 G1 F600 G1 X6.918 Y-13.748 E.01785 G1 X6.541 Y-13.748 E.01158 G1 X6.541 Y-14.329 E.01785 G1 F1500 G1 X6.541 Y-15.452 E.03451 G1 X6.164 Y-15.452 E.01158 G1 X6.164 Y-11.278 E.12826 G1 X5.787 Y-11.278 E.01158 G1 X5.787 Y-15.452 E.12826 G1 X5.409 Y-15.452 E.01161 G1 X5.409 Y-11.278 E.12826 G1 X5.032 Y-11.278 E.01158 G1 X5.032 Y-15.452 E.12826 G1 X4.655 Y-15.452 E.01158 G1 X4.655 Y-11.278 E.12826 G1 X4.278 Y-11.278 E.01158 G1 X4.278 Y-15.452 E.12826 G1 X3.901 Y-15.452 E.01158 G1 X3.901 Y-11.278 E.12826 G1 X3.524 Y-11.278 E.01158 G1 X3.524 Y-15.622 E.13348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X3.524 Y-13.622 ;WIPE_END G17 G3 Z44.2 I-1.217 J-.001 P1 F30000 G1 X3.498 Y9.952 Z44.2 G1 Z43.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 M106 S255 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6716 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z44.2 F30000 G1 X3.498 Y40.648 Z44.2 G1 Z43.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6716 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z44.2 F30000 G1 X33.195 Y40.745 Z44.2 G1 Z43.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F6716 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:44 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;44 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;44 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z44.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z44.4 G1 Z44 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z44.4 F30000 G1 X3.498 Y-10.952 Z44.4 G1 Z44 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3334 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z44.4 F30000 G1 Z44 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3334 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3334 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3334 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3334 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3334 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G17 G3 Z44.4 I-1.217 J.002 P1 F30000 G1 X3.498 Y9.952 Z44.4 G1 Z44 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3334 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z44.4 F30000 G1 X3.498 Y40.31 Z44.4 G1 Z44 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3334 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z44.4 F30000 G1 X33.195 Y40.745 Z44.4 G1 Z44 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3334 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:44.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;44.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;44.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z44.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z44.6 G1 Z44.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z44.6 F30000 G1 X3.498 Y-10.952 Z44.6 G1 Z44.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 M73 P64 R39 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G17 G3 Z44.6 I1.125 J.463 P1 F30000 G1 X6.472 Y-13.244 Z44.6 G1 Z44.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3342 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3342 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3342 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G17 G3 Z44.6 I-1.208 J-.151 P1 F30000 G1 X3.498 Y9.952 Z44.6 G1 Z44.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z44.6 F30000 G1 X3.498 Y40.31 Z44.6 G1 Z44.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z44.6 F30000 G1 X33.195 Y40.745 Z44.6 G1 Z44.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3342 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:44.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;44.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;44.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z44.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z44.8 G1 Z44.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z44.8 F30000 G1 X3.498 Y-10.952 Z44.8 G1 Z44.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z44.8 F30000 G1 Z44.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3325 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3325 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3325 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G1 X3.462 Y-7.729 Z44.8 F30000 G1 X3.498 Y9.952 Z44.8 G1 Z44.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z44.8 F30000 G1 X3.498 Y40.31 Z44.8 G1 Z44.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z44.8 F30000 G1 X33.195 Y40.745 Z44.8 G1 Z44.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3325 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:44.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;44.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;44.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z45 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z45 G1 Z44.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z45 F30000 G1 X3.498 Y-10.952 Z45 G1 Z44.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-13.244 Z45 F30000 G1 Z44.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3323 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3323 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3323 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G1 X5.647 Y-7.26 Z45 F30000 G1 X3.498 Y9.952 Z45 G1 Z44.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z45 F30000 G1 X3.498 Y40.31 Z45 G1 Z44.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z45 F30000 G1 X33.195 Y40.745 Z45 G1 Z44.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3323 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:44.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;44.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;44.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z45.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z45.2 G1 Z44.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3352 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3352 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z45.2 F30000 G1 X3.498 Y-10.952 Z45.2 G1 Z44.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3352 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3352 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3352 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X3.472 Y-7.788 Z45.2 F30000 G1 Z44.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.442078 G1 F3352 G1 X3.128 Y-7.444 E.01578 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-8.009 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.472 Y-8.352 E.01578 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-8.917 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.128 Y-8.573 E.01578 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-9.138 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.472 Y-9.481 E.01578 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-10.046 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.128 Y-9.702 E.01578 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-10.267 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.472 Y-10.61 E.01578 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.128 Y-10.267 ;WIPE_END G1 X4.847 Y-11.421 Z45.2 F30000 G1 Z44.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X5.513 Y-12.087 E.03063 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.504 Y-12.643 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.84 Y-10.978 E.07656 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-10.831 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X5.398 Y-13.101 E.1044 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.226 Y-13.493 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.128 Y-11.396 E.09648 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-11.96 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X4.995 Y-13.827 E.08586 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.689 Y-14.085 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.128 Y-12.525 E.07179 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-13.089 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X4.318 Y-14.279 E.05472 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.895 Y-14.421 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3352 G1 X3.128 Y-13.654 E.03527 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.712 Y-14.534 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.441784 G1 F3352 G1 X5.637 Y-14.491 E.00281 G1 X5.717 Y-14.456 E.00283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3352 G1 X7.184 Y-14.834 E.01779 G1 X6.294 Y-14.834 E.03386 ;WIDTH:0.487667 G1 X5.991 Y-14.856 E.01104 ;WIDTH:0.421789 G1 X5.687 Y-14.879 E.0094 G1 X4.367 Y-14.879 E.04075 G1 X4.762 Y-14.717 E.01317 G1 X5.204 Y-14.428 E.01631 G3 X5.731 Y-13.807 I-3.411 J3.427 E.02519 G1 X5.761 Y-13.944 E.00433 G1 X5.934 Y-14.192 E.00934 ;WIDTH:0.444155 G1 X6.061 Y-14.276 E.00499 ;WIDTH:0.508852 G1 X6.188 Y-14.36 E.00579 G3 X7.144 Y-14.366 I.859 J60.305 E.03627 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.104 Y-11.346 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.421026 G1 F3352 G3 X6.106 Y-13.756 I850.111 J-.463 E.07423 G1 X6.174 Y-13.901 E.00495 G1 X6.294 Y-13.944 E.00393 G1 X7.606 Y-13.944 E.04041 G1 X7.606 Y-15.256 E.04041 G1 X4.669 Y-15.256 E.09048 ;WIDTH:0.444202 G1 X4.408 Y-15.232 E.00858 ;WIDTH:0.492607 G1 X4.147 Y-15.207 E.00961 ;WIDTH:0.530724 G1 X3.553 Y-15.197 E.02361 G1 X3.571 Y-14.729 E.0186 G1 X4.046 Y-14.648 E.01917 ;WIDTH:0.492607 G1 X4.282 Y-14.534 E.00961 ;WIDTH:0.423852 G3 X4.998 Y-14.112 I-1.377 J3.156 E.02584 G1 X5.351 Y-13.688 E.01714 G1 X5.592 Y-13.173 E.01766 G1 X5.719 Y-12.628 E.01736 G1 X5.722 Y-11.537 E.03389 ;WIDTH:0.395697 G1 X5.699 Y-11.403 E.00391 G1 X5.553 Y-11.28 E.00547 G1 X6.064 Y-11.342 E.0148 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.833 Y-11.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3352 G1 X5.513 Y-11.279 E.01885 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.833 Y-11.279 ;WIPE_END G1 X4.354 Y-3.661 Z45.2 F30000 G1 X3.498 Y9.952 Z45.2 G1 Z44.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3352 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3352 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3352 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z45.2 F30000 G1 X3.498 Y40.31 Z45.2 G1 Z44.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3352 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3352 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3352 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 M73 P64 R38 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z45.2 F30000 G1 X33.195 Y40.745 Z45.2 G1 Z44.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3352 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3352 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3352 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:45 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;45 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;45 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z45.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z45.4 G1 Z45 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z45.4 F30000 G1 X4.602 Y-10.992 Z45.4 G1 Z45 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X4.602 Y-13.552 E.08493 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06952 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3048 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-12.71 E.2028 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-16.49 E.11615 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F3048 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X4.946 Y-11.312 Z45.4 F30000 G1 Z45 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F3048 G1 X4.883 Y-11.275 E.00204 G1 X4.948 Y-11.24 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-13.196 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3048 G1 X6.106 Y-13.756 E.01719 G1 X6.193 Y-13.915 E.00557 G1 X6.294 Y-13.944 E.00324 G1 X7.606 Y-13.944 E.0403 G1 X7.606 Y-15.256 E.0403 G1 X4.046 Y-15.256 E.10938 G1 X6.078 Y-13.224 E.08827 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3048 G1 X7.184 Y-14.834 E.01779 G1 X6.294 Y-14.834 E.03386 ;WIDTH:0.528131 G1 X5.723 Y-14.816 E.0226 ;WIDTH:0.576064 G1 X5.152 Y-14.798 E.02483 G1 X5.841 Y-14.108 E.04236 G1 X5.947 Y-14.301 E.00955 ;WIDTH:0.563949 G1 X6.121 Y-14.334 E.0075 ;WIDTH:0.516389 G1 X6.294 Y-14.366 E.00682 G1 X7.144 Y-14.366 E.03277 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.437 Y-13.902 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3048 G1 X3.373 Y-13.865 E.00204 G1 X3.438 Y-13.831 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.19 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.435085 G1 F3048 G1 X6.302 Y-12.509 E.14064 G1 X6.302 Y-11.955 E.01772 G1 X3.298 Y-14.959 E.13575 G1 X3.298 Y-14.404 E.01772 G1 X4.124 Y-13.578 E.03731 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.628 Y-13.074 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3048 G1 X6.302 Y-11.4 E.07563 G1 X6.302 Y-11.148 E.00806 G1 X5.999 Y-11.148 E.00966 G1 X4.798 Y-12.349 E.05429 G1 X4.798 Y-11.795 E.01772 G1 X5.615 Y-10.978 E.0369 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.798 Y-11.795 G1 X4.798 Y-12.349 G1 X5.004 Y-12.144 ;WIPE_END G1 X4.485 Y-4.529 Z45.4 F30000 G1 X3.498 Y9.952 Z45.4 G1 Z45 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3048 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z45.4 F30000 G1 X3.498 Y40.648 Z45.4 G1 Z45 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3048 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z45.4 F30000 G1 X33.195 Y40.745 Z45.4 G1 Z45 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3048 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:45.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;45.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;45.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z45.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z45.6 G1 Z45.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2965 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2965 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z45.6 F30000 G1 X4.602 Y-10.992 Z45.6 G1 Z45.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2965 G1 X4.602 Y-13.552 E.08493 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06952 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2965 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2965 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-12.71 E.2028 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-16.49 E.11615 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2965 G1 X4.05 Y-6.328 E.04726 G1 X4.651 Y-12.383 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.495415 G1 F2965 G1 X7.867 Y-15.599 E.16768 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.574 Y-13.975 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.483676 G1 F2965 G1 X7.574 Y-14.727 E.027 G1 X6.82 Y-13.973 E.0383 G1 X7.534 Y-13.975 E.02564 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.717 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.41088 G1 F2965 G1 X5.735 Y-12.407 E.02069 G1 X5.367 Y-12.038 E.01564 G1 X5.367 Y-11.717 E.00963 G1 X5.694 Y-11.717 E.00982 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2965 G1 X6.11 Y-13.308 E.06033 G1 X4.994 Y-12.192 E.04847 G1 X4.994 Y-11.344 E.02606 G1 X6.066 Y-11.344 E.03294 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.994 Y-13.259 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F2965 G1 X6.991 Y-15.256 E.08678 G1 X3.494 Y-15.256 E.10745 G1 X3.494 Y-13.944 E.0403 G1 X4.806 Y-13.944 E.0403 G1 X4.9 Y-13.919 E.00301 G1 X4.994 Y-13.756 E.00578 G1 X4.994 Y-13.299 E.01404 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.229 Y-14.134 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.57139 G1 F2965 G1 X5.898 Y-14.803 E.04075 G1 X5.26 Y-14.803 E.02747 ;WIDTH:0.556098 G1 X4.705 Y-14.818 E.02322 ;WIDTH:0.51418 G2 X3.916 Y-14.834 I-.672 J14.306 E.0303 G1 X3.916 Y-14.366 E.01795 G1 X4.806 Y-14.366 E.03415 ;WIDTH:0.525514 G1 X4.967 Y-14.338 E.00642 ;WIDTH:0.5561 G1 X5.128 Y-14.31 E.00683 G1 X5.209 Y-14.169 E.00683 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F14913.026 G1 X5.128 Y-14.31 G1 X4.967 Y-14.338 ;WIPE_END G1 X4.506 Y-6.72 Z45.6 F30000 G1 X3.498 Y9.952 Z45.6 G1 Z45.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2965 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2965 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2965 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z45.6 F30000 G1 X3.498 Y40.648 Z45.6 G1 Z45.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2965 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2965 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2965 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z45.6 F30000 G1 X33.195 Y40.745 Z45.6 G1 Z45.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2965 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2965 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2965 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:45.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;45.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;45.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z45.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z45.8 G1 Z45.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z45.8 F30000 G1 X4.602 Y-10.992 Z45.8 G1 Z45.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X4.602 Y-13.552 E.08493 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06952 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3048 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-12.71 E.2028 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-16.49 E.11615 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F3048 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X4.946 Y-11.312 Z45.8 F30000 G1 Z45.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F3048 G1 X4.883 Y-11.275 E.00204 G1 X4.948 Y-11.24 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-13.196 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3048 G1 X6.106 Y-13.756 E.01719 G1 X6.193 Y-13.915 E.00557 G1 X6.294 Y-13.944 E.00324 G1 X7.606 Y-13.944 E.0403 G1 X7.606 Y-15.256 E.0403 G1 X4.046 Y-15.256 E.10938 G1 X6.078 Y-13.224 E.08827 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3048 G1 X7.184 Y-14.834 E.01779 G1 X6.294 Y-14.834 E.03386 ;WIDTH:0.528131 G1 X5.723 Y-14.816 E.0226 ;WIDTH:0.576064 G1 X5.152 Y-14.798 E.02483 G1 X5.841 Y-14.108 E.04236 G1 X5.947 Y-14.301 E.00955 ;WIDTH:0.563949 G1 X6.121 Y-14.334 E.0075 ;WIDTH:0.516389 G1 X6.294 Y-14.366 E.00682 G1 X7.144 Y-14.366 E.03277 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.437 Y-13.902 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3048 G1 X3.373 Y-13.865 E.00204 G1 X3.438 Y-13.831 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.19 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.435085 G1 F3048 G1 X6.302 Y-12.509 E.14064 G1 X6.302 Y-11.955 E.01772 G1 X3.298 Y-14.959 E.13575 G1 X3.298 Y-14.404 E.01772 G1 X4.124 Y-13.578 E.03731 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.628 Y-13.074 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3048 G1 X6.302 Y-11.4 E.07563 G1 X6.302 Y-11.148 E.00806 G1 X5.999 Y-11.148 E.00966 G1 X4.798 Y-12.349 E.05429 G1 X4.798 Y-11.795 E.01772 G1 X5.615 Y-10.978 E.0369 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.798 Y-11.795 G1 X4.798 Y-12.349 G1 X5.004 Y-12.144 ;WIPE_END G1 X4.485 Y-4.529 Z45.8 F30000 G1 X3.498 Y9.952 Z45.8 G1 Z45.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3048 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z45.8 F30000 G1 X3.498 Y40.648 Z45.8 G1 Z45.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3048 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z45.8 F30000 G1 X33.195 Y40.745 Z45.8 G1 Z45.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3048 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3048 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3048 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:45.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;45.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;45.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z46 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z46 G1 Z45.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3167 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3167 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z46 F30000 G1 X4.602 Y-10.992 Z46 G1 Z45.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3167 G1 X4.602 Y-13.552 E.08493 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06952 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3167 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3167 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-12.71 E.2028 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-16.49 E.11615 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F3167 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.472 Y-11.747 Z46 F30000 G1 Z45.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.422953 G1 F3167 G1 X5.703 Y-10.978 E.03366 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.166 Y-10.978 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X6.472 Y-12.284 E.0572 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-12.822 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X4.628 Y-10.979 E.08072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.628 Y-11.516 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X6.472 Y-13.359 E.08072 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.228 Y-13.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X7.972 Y-14.322 E.03256 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.859 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X6.691 Y-13.578 E.0561 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.972 Y-14.859 ;WIPE_END G1 X7.972 Y-15.397 Z46 F30000 G1 Z45.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X4.628 Y-12.054 E.14641 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.628 Y-12.591 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X7.659 Y-15.622 E.13272 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.122 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X4.628 Y-13.128 E.10919 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.541 Y-13.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X6.584 Y-15.622 E.08948 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.047 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X4.003 Y-13.578 E.08948 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.466 Y-13.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X5.509 Y-15.622 E.08948 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.972 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X3.128 Y-13.778 E.08073 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-14.316 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X4.434 Y-15.622 E.05719 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.897 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3167 G1 X3.128 Y-14.853 E.03365 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.897 Y-15.622 ;WIPE_END G1 X3.778 Y-7.99 Z46 F30000 G1 X3.498 Y9.952 Z46 G1 Z45.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3167 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3167 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3167 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z46 F30000 G1 X3.498 Y40.648 Z46 G1 Z45.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3167 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3167 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3167 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z46 F30000 G1 X33.195 Y40.745 Z46 G1 Z45.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3167 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3167 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3167 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:45.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;45.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;45.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z46.2 I.35 J-1.166 P1 F30000 G1 X33.195 Y40.745 Z46.2 G1 Z45.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z46.2 F30000 G1 X3.498 Y40.31 Z46.2 G1 Z45.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 M73 P65 R38 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z46.2 F30000 G1 X3.498 Y9.952 Z46.2 G1 Z45.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z46.2 F30000 G1 X4.195 Y-10.545 Z46.2 G1 Z45.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z46.2 F30000 G1 X31.195 Y-10.545 Z46.2 G1 Z45.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:46 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;46 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;46 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z46.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z46.4 G1 Z46 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z46.4 F30000 G1 X3.498 Y40.31 Z46.4 G1 Z46 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z46.4 F30000 G1 X3.498 Y9.952 Z46.4 G1 Z46 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z46.4 F30000 G1 X4.195 Y-10.545 Z46.4 G1 Z46 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z46.4 F30000 G1 X31.195 Y-10.545 Z46.4 G1 Z46 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:46.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;46.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;46.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z46.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z46.6 G1 Z46.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z46.6 F30000 G1 X3.498 Y40.31 Z46.6 G1 Z46.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z46.6 F30000 G1 X3.498 Y9.952 Z46.6 G1 Z46.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z46.6 F30000 G1 X4.195 Y-10.545 Z46.6 G1 Z46.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z46.6 F30000 G1 X31.195 Y-10.545 Z46.6 G1 Z46.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:46.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;46.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;46.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z46.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z46.8 G1 Z46.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z46.8 F30000 G1 X3.498 Y40.31 Z46.8 G1 Z46.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z46.8 F30000 G1 X3.498 Y9.952 Z46.8 G1 Z46.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 M73 P65 R37 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z46.8 F30000 G1 X4.195 Y-10.545 Z46.8 G1 Z46.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z46.8 F30000 G1 X31.195 Y-10.545 Z46.8 G1 Z46.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:46.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;46.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;46.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z47 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z47 G1 Z46.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z47 F30000 G1 X3.498 Y40.31 Z47 G1 Z46.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z47 F30000 G1 X3.498 Y9.952 Z47 G1 Z46.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z47 F30000 G1 X4.195 Y-10.545 Z47 G1 Z46.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z47 F30000 G1 X31.195 Y-10.545 Z47 G1 Z46.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:46.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;46.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;46.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z47.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z47.2 G1 Z46.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z47.2 F30000 G1 X3.498 Y40.31 Z47.2 G1 Z46.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z47.2 F30000 G1 X3.498 Y9.952 Z47.2 G1 Z46.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z47.2 F30000 G1 X4.195 Y-10.545 Z47.2 G1 Z46.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z47.2 F30000 G1 X31.195 Y-10.545 Z47.2 G1 Z46.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:47 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;47 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;47 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z47.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z47.4 G1 Z47 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z47.4 F30000 G1 X3.498 Y40.31 Z47.4 G1 Z47 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z47.4 F30000 G1 X3.498 Y9.952 Z47.4 G1 Z47 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z47.4 F30000 G1 X4.195 Y-10.545 Z47.4 G1 Z47 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z47.4 F30000 G1 X31.195 Y-10.545 Z47.4 G1 Z47 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:47.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;47.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;47.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z47.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z47.6 G1 Z47.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z47.6 F30000 G1 X3.498 Y40.31 Z47.6 G1 Z47.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z47.6 F30000 G1 X3.498 Y9.952 Z47.6 G1 Z47.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z47.6 F30000 G1 X4.195 Y-10.545 Z47.6 G1 Z47.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z47.6 F30000 G1 X31.195 Y-10.545 Z47.6 G1 Z47.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:47.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;47.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;47.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z47.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z47.8 G1 Z47.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z47.8 F30000 G1 X3.498 Y40.31 Z47.8 G1 Z47.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z47.8 F30000 G1 X3.498 Y9.952 Z47.8 G1 Z47.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z47.8 F30000 G1 X4.195 Y-10.545 Z47.8 G1 Z47.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z47.8 F30000 G1 X31.195 Y-10.545 Z47.8 G1 Z47.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:47.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;47.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;47.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z48 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z48 G1 Z47.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z48 F30000 G1 X3.498 Y40.31 Z48 G1 Z47.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 M73 P66 R37 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z48 F30000 G1 X3.498 Y9.952 Z48 G1 Z47.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z48 F30000 G1 X4.195 Y-10.545 Z48 G1 Z47.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z48 F30000 G1 X31.195 Y-10.545 Z48 G1 Z47.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:47.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;47.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;47.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z48.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z48.2 G1 Z47.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z48.2 F30000 G1 X3.498 Y40.31 Z48.2 G1 Z47.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z48.2 F30000 G1 X3.498 Y9.952 Z48.2 G1 Z47.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z48.2 F30000 G1 X4.195 Y-10.545 Z48.2 G1 Z47.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z48.2 F30000 G1 X31.195 Y-10.545 Z48.2 G1 Z47.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:48 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;48 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;48 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z48.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z48.4 G1 Z48 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z48.4 F30000 G1 X3.498 Y40.31 Z48.4 G1 Z48 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z48.4 F30000 G1 X3.498 Y9.952 Z48.4 G1 Z48 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z48.4 F30000 G1 X4.195 Y-10.545 Z48.4 G1 Z48 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z48.4 F30000 G1 X31.195 Y-10.545 Z48.4 M73 P66 R36 G1 Z48 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:48.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;48.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;48.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z48.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z48.6 G1 Z48.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z48.6 F30000 G1 X3.498 Y40.31 Z48.6 G1 Z48.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z48.6 F30000 G1 X3.498 Y9.952 Z48.6 G1 Z48.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z48.6 F30000 G1 X4.195 Y-10.545 Z48.6 G1 Z48.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z48.6 F30000 G1 X31.195 Y-10.545 Z48.6 G1 Z48.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:48.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;48.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;48.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z48.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z48.8 G1 Z48.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z48.8 F30000 G1 X3.498 Y40.31 Z48.8 G1 Z48.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z48.8 F30000 G1 X3.498 Y9.952 Z48.8 G1 Z48.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z48.8 F30000 G1 X4.195 Y-10.545 Z48.8 G1 Z48.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z48.8 F30000 G1 X31.195 Y-10.545 Z48.8 G1 Z48.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:48.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;48.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;48.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z49 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z49 G1 Z48.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z49 F30000 G1 X3.498 Y40.31 Z49 G1 Z48.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z49 F30000 G1 X3.498 Y9.952 Z49 G1 Z48.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z49 F30000 G1 X4.195 Y-10.545 Z49 G1 Z48.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z49 F30000 G1 X31.195 Y-10.545 Z49 G1 Z48.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:48.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;48.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;48.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z49.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z49.2 G1 Z48.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z49.2 F30000 G1 X3.498 Y40.31 Z49.2 G1 Z48.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z49.2 F30000 G1 X3.498 Y9.952 Z49.2 G1 Z48.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z49.2 F30000 G1 X4.195 Y-10.545 Z49.2 G1 Z48.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z49.2 F30000 G1 X31.195 Y-10.545 Z49.2 G1 Z48.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:49 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;49 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;49 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z49.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z49.4 G1 Z49 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z49.4 F30000 G1 X3.498 Y40.31 Z49.4 G1 Z49 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z49.4 F30000 G1 X3.498 Y9.952 Z49.4 G1 Z49 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z49.4 F30000 G1 X4.195 Y-10.545 Z49.4 G1 Z49 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z49.4 F30000 G1 X31.195 Y-10.545 Z49.4 G1 Z49 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:49.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;49.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;49.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z49.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z49.6 G1 Z49.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z49.6 F30000 G1 X3.498 Y40.31 Z49.6 G1 Z49.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z49.6 F30000 G1 X3.498 Y9.952 Z49.6 G1 Z49.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z49.6 F30000 G1 X4.195 Y-10.545 Z49.6 G1 Z49.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z49.6 F30000 G1 X31.195 Y-10.545 Z49.6 G1 Z49.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:49.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;49.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;49.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z49.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z49.8 G1 Z49.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z49.8 F30000 G1 X3.498 Y40.31 Z49.8 G1 Z49.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 M73 P67 R36 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z49.8 F30000 G1 X3.498 Y9.952 Z49.8 G1 Z49.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z49.8 F30000 G1 X4.195 Y-10.545 Z49.8 G1 Z49.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z49.8 F30000 G1 X31.195 Y-10.545 Z49.8 G1 Z49.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:49.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;49.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;49.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z50 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z50 G1 Z49.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z50 F30000 G1 X3.498 Y40.31 Z50 G1 Z49.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z50 F30000 G1 X3.498 Y9.952 Z50 G1 Z49.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z50 F30000 G1 X4.195 Y-10.545 Z50 G1 Z49.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z50 F30000 G1 X31.195 Y-10.545 Z50 G1 Z49.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:49.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;49.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;49.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z50.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z50.2 G1 Z49.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 M73 P67 R35 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z50.2 F30000 G1 X3.498 Y40.31 Z50.2 G1 Z49.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z50.2 F30000 G1 X3.498 Y9.952 Z50.2 G1 Z49.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z50.2 F30000 G1 X4.195 Y-10.545 Z50.2 G1 Z49.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z50.2 F30000 G1 X31.195 Y-10.545 Z50.2 G1 Z49.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:50 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;50 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;50 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z50.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z50.4 G1 Z50 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z50.4 F30000 G1 X3.498 Y40.31 Z50.4 G1 Z50 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z50.4 F30000 G1 X3.498 Y9.952 Z50.4 G1 Z50 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z50.4 F30000 G1 X4.195 Y-10.545 Z50.4 G1 Z50 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z50.4 F30000 G1 X31.195 Y-10.545 Z50.4 G1 Z50 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:50.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;50.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;50.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z50.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z50.6 G1 Z50.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z50.6 F30000 G1 X3.498 Y40.31 Z50.6 G1 Z50.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z50.6 F30000 G1 X3.498 Y9.952 Z50.6 G1 Z50.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z50.6 F30000 G1 X4.195 Y-10.545 Z50.6 G1 Z50.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z50.6 F30000 G1 X31.195 Y-10.545 Z50.6 G1 Z50.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:50.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;50.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;50.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z50.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z50.8 G1 Z50.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z50.8 F30000 G1 X3.498 Y40.31 Z50.8 G1 Z50.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z50.8 F30000 G1 X3.498 Y9.952 Z50.8 G1 Z50.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z50.8 F30000 G1 X4.195 Y-10.545 Z50.8 G1 Z50.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z50.8 F30000 G1 X31.195 Y-10.545 Z50.8 G1 Z50.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:50.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;50.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;50.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z51 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z51 G1 Z50.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z51 F30000 G1 X3.498 Y40.31 Z51 G1 Z50.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z51 F30000 G1 X3.498 Y9.952 Z51 G1 Z50.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z51 F30000 G1 X4.195 Y-10.545 Z51 G1 Z50.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z51 F30000 G1 X31.195 Y-10.545 Z51 G1 Z50.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:50.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;50.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;50.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z51.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z51.2 G1 Z50.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z51.2 F30000 G1 X3.498 Y40.31 Z51.2 G1 Z50.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z51.2 F30000 G1 X3.498 Y9.952 Z51.2 G1 Z50.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z51.2 F30000 G1 X4.195 Y-10.545 Z51.2 G1 Z50.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z51.2 F30000 G1 X31.195 Y-10.545 Z51.2 G1 Z50.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:51 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;51 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;51 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z51.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z51.4 G1 Z51 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z51.4 F30000 G1 X3.498 Y40.31 Z51.4 G1 Z51 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z51.4 F30000 G1 X3.498 Y9.952 Z51.4 G1 Z51 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z51.4 F30000 G1 X4.195 Y-10.545 Z51.4 G1 Z51 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z51.4 F30000 G1 X31.195 Y-10.545 Z51.4 G1 Z51 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:51.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;51.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;51.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z51.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z51.6 G1 Z51.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z51.6 F30000 G1 X3.498 Y40.31 Z51.6 G1 Z51.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 M73 P68 R35 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z51.6 F30000 G1 X3.498 Y9.952 Z51.6 G1 Z51.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z51.6 F30000 G1 X4.195 Y-10.545 Z51.6 G1 Z51.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z51.6 F30000 G1 X31.195 Y-10.545 Z51.6 G1 Z51.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:51.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;51.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;51.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z51.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z51.8 G1 Z51.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z51.8 F30000 G1 X3.498 Y40.31 Z51.8 G1 Z51.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 M73 P68 R34 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z51.8 F30000 G1 X3.498 Y9.952 Z51.8 G1 Z51.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z51.8 F30000 G1 X4.195 Y-10.545 Z51.8 G1 Z51.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z51.8 F30000 G1 X31.195 Y-10.545 Z51.8 G1 Z51.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:51.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;51.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;51.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z52 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z52 G1 Z51.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z52 F30000 G1 X3.498 Y40.31 Z52 G1 Z51.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z52 F30000 G1 X3.498 Y9.952 Z52 G1 Z51.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z52 F30000 G1 X4.195 Y-10.545 Z52 G1 Z51.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z52 F30000 G1 X31.195 Y-10.545 Z52 G1 Z51.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:51.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;51.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;51.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z52.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z52.2 G1 Z51.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z52.2 F30000 G1 X3.498 Y40.31 Z52.2 G1 Z51.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z52.2 F30000 G1 X3.498 Y9.952 Z52.2 G1 Z51.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z52.2 F30000 G1 X4.195 Y-10.545 Z52.2 G1 Z51.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z52.2 F30000 G1 X31.195 Y-10.545 Z52.2 G1 Z51.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:52 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;52 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;52 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z52.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z52.4 G1 Z52 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z52.4 F30000 G1 X3.498 Y40.31 Z52.4 G1 Z52 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z52.4 F30000 G1 X3.498 Y9.952 Z52.4 G1 Z52 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z52.4 F30000 G1 X4.195 Y-10.545 Z52.4 G1 Z52 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z52.4 F30000 G1 X31.195 Y-10.545 Z52.4 G1 Z52 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:52.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;52.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;52.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z52.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z52.6 G1 Z52.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z52.6 F30000 G1 X3.498 Y40.31 Z52.6 G1 Z52.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z52.6 F30000 G1 X3.498 Y9.952 Z52.6 G1 Z52.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z52.6 F30000 G1 X4.195 Y-10.545 Z52.6 G1 Z52.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z52.6 F30000 G1 X31.195 Y-10.545 Z52.6 G1 Z52.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:52.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;52.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;52.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z52.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z52.8 G1 Z52.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z52.8 F30000 G1 X3.498 Y40.31 Z52.8 G1 Z52.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z52.8 F30000 G1 X3.498 Y9.952 Z52.8 G1 Z52.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z52.8 F30000 G1 X4.195 Y-10.545 Z52.8 G1 Z52.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z52.8 F30000 G1 X31.195 Y-10.545 Z52.8 G1 Z52.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:52.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;52.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;52.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z53 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z53 G1 Z52.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z53 F30000 G1 X3.498 Y40.31 Z53 G1 Z52.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z53 F30000 G1 X3.498 Y9.952 Z53 G1 Z52.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z53 F30000 G1 X4.195 Y-10.545 Z53 G1 Z52.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z53 F30000 G1 X31.195 Y-10.545 Z53 G1 Z52.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:52.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;52.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;52.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z53.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z53.2 G1 Z52.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z53.2 F30000 G1 X3.498 Y40.31 Z53.2 G1 Z52.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z53.2 F30000 G1 X3.498 Y9.952 Z53.2 G1 Z52.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z53.2 F30000 G1 X4.195 Y-10.545 Z53.2 G1 Z52.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z53.2 F30000 G1 X31.195 Y-10.545 Z53.2 G1 Z52.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:53 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;53 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;53 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z53.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z53.4 G1 Z53 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z53.4 F30000 G1 X3.498 Y40.31 Z53.4 G1 Z53 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 M73 P69 R34 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z53.4 F30000 G1 X3.498 Y9.952 Z53.4 G1 Z53 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 M73 P69 R33 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z53.4 F30000 G1 X4.195 Y-10.545 Z53.4 G1 Z53 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z53.4 F30000 G1 X31.195 Y-10.545 Z53.4 G1 Z53 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:53.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;53.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;53.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z53.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z53.6 G1 Z53.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z53.6 F30000 G1 X3.498 Y40.31 Z53.6 G1 Z53.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z53.6 F30000 G1 X3.498 Y9.952 Z53.6 G1 Z53.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z53.6 F30000 G1 X4.195 Y-10.545 Z53.6 G1 Z53.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z53.6 F30000 G1 X31.195 Y-10.545 Z53.6 G1 Z53.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:53.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;53.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;53.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z53.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z53.8 G1 Z53.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z53.8 F30000 G1 X3.498 Y40.31 Z53.8 G1 Z53.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z53.8 F30000 G1 X3.498 Y9.952 Z53.8 G1 Z53.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z53.8 F30000 G1 X4.195 Y-10.545 Z53.8 G1 Z53.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z53.8 F30000 G1 X31.195 Y-10.545 Z53.8 G1 Z53.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:53.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;53.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;53.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z54 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z54 G1 Z53.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z54 F30000 G1 X3.498 Y40.31 Z54 G1 Z53.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z54 F30000 G1 X3.498 Y9.952 Z54 G1 Z53.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z54 F30000 G1 X4.195 Y-10.545 Z54 G1 Z53.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z54 F30000 G1 X31.195 Y-10.545 Z54 G1 Z53.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:53.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;53.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;53.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z54.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z54.2 G1 Z53.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z54.2 F30000 G1 X3.498 Y40.31 Z54.2 G1 Z53.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z54.2 F30000 G1 X3.498 Y9.952 Z54.2 G1 Z53.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z54.2 F30000 G1 X4.195 Y-10.545 Z54.2 G1 Z53.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z54.2 F30000 G1 X31.195 Y-10.545 Z54.2 G1 Z53.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:54 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;54 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;54 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z54.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z54.4 G1 Z54 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z54.4 F30000 G1 X3.498 Y40.31 Z54.4 G1 Z54 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z54.4 F30000 G1 X3.498 Y9.952 Z54.4 G1 Z54 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z54.4 F30000 G1 X4.195 Y-10.545 Z54.4 G1 Z54 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z54.4 F30000 G1 X31.195 Y-10.545 Z54.4 G1 Z54 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:54.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;54.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;54.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z54.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z54.6 G1 Z54.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z54.6 F30000 G1 X3.498 Y40.31 Z54.6 G1 Z54.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z54.6 F30000 G1 X3.498 Y9.952 Z54.6 G1 Z54.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z54.6 F30000 G1 X4.195 Y-10.545 Z54.6 G1 Z54.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z54.6 F30000 G1 X31.195 Y-10.545 Z54.6 G1 Z54.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:54.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;54.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;54.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z54.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z54.8 G1 Z54.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z54.8 F30000 G1 X3.498 Y40.31 Z54.8 G1 Z54.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z54.8 F30000 G1 X3.498 Y9.952 Z54.8 G1 Z54.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z54.8 F30000 G1 X4.195 Y-10.545 Z54.8 G1 Z54.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z54.8 F30000 G1 X31.195 Y-10.545 Z54.8 G1 Z54.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:54.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;54.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;54.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z55 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z55 G1 Z54.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z55 F30000 G1 X3.498 Y40.31 Z55 G1 Z54.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z55 F30000 G1 X3.498 Y9.952 Z55 G1 Z54.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 M73 P69 R32 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z55 F30000 G1 X4.195 Y-10.545 Z55 G1 Z54.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z55 F30000 G1 X31.195 Y-10.545 Z55 G1 Z54.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:54.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;54.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;54.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z55.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z55.2 G1 Z54.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z55.2 F30000 G1 X31.195 Y-10.545 Z55.2 G1 Z54.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z55.2 F30000 G1 X4.195 Y-10.545 Z55.2 G1 Z54.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G17 G3 Z55.2 I-1.098 J-.526 P1 F30000 G1 X3.102 Y-5.048 Z55.2 G1 Z54.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 F600 G1 X3.498 Y-5.048 E.01314 G1 X3.498 Y-3.296 E.05812 G1 X3.498 Y7.6 E.36144 G1 X3.498 Y8.7 E.03649 M73 P70 R32 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X3.498 Y9.8 E.03649 G1 F18000 G1 X3.498 Y18 E.27201 G1 F600 G1 X3.498 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.498 Y20.2 E.03649 G1 X3.498 Y32.8 E.41797 G1 X3.498 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.498 Y34.1 E.00663 M106 S255 G1 F2400 G1 X3.498 Y35 E.02985 G1 F18000 G1 X3.498 Y40.648 E.18735 G1 X3.102 Y40.648 E.01314 G1 X3.102 Y35 E.18735 G1 F2400 G1 X3.102 Y34.1 E.02985 G1 F600 G1 X3.102 Y33.9 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y32.8 E.03649 G1 X3.102 Y20.2 E.41797 G1 X3.102 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X3.102 Y18 E.03649 G1 F18000 G1 X3.102 Y9.8 E.27201 G1 F600 G1 X3.102 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y7.6 E.03649 G1 X3.102 Y-3.216 E.35879 G1 X3.102 Y-5.008 E.05944 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F600 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y-4.11 E.04462 G1 X3.905 Y7.6 E.38844 G1 X3.905 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X3.905 Y9.8 E.03649 G1 F18000 G1 X3.905 Y18 E.27201 G1 F600 G1 X3.905 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.905 Y20.2 E.03649 G1 X3.905 Y32.8 E.41797 G1 X3.905 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.905 Y34.1 E.00663 M106 S255 G1 F2400 G1 X3.905 Y35 E.02985 G1 F18000 G1 X3.905 Y40.745 E.19057 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y40.8 E.00846 G1 X2.695 Y35 E.1924 G1 F2400 G1 X2.695 Y34.1 E.02985 G1 F600 G1 X2.695 Y33.9 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y32.8 E.03649 G1 X2.695 Y20.2 E.41797 G1 X2.695 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X2.695 Y18 E.03649 G1 F18000 G1 X2.695 Y9.8 E.27201 G1 F600 G1 X2.695 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y7.6 E.03649 G1 X2.695 Y-4.03 E.38579 G1 X2.695 Y-5.415 E.04594 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F600 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G17 G3 Z55.2 I1.213 J.097 P1 F30000 G1 X4.34 Y-10.11 Z55.2 G1 Z54.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 M106 S255 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 F2400 G1 X4.34 Y-5.9 E.02581 G1 F600 G1 X4.34 Y-5.7 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X4.34 Y-4.6 E.03649 G1 X4.34 Y7.6 E.4047 G1 X4.34 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X4.34 Y9.74 E.03196 G1 F12000 G1 X4.34 Y18.06 E.25565 G1 F600 G1 X4.34 Y19.1 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X4.34 Y20.2 E.03649 G1 X4.34 Y32.8 E.41797 G1 X4.34 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X4.34 Y34.1 E.00615 M106 S255 G1 F2400 G1 X4.34 Y34.94 E.02581 G1 F12000 G1 X4.34 Y39.767 E.14832 G1 X4.34 Y40.31 E.01668 G1 X4.883 Y40.31 E.01668 G1 X6.71 Y40.31 E.05614 G1 X7.34 Y40.31 E.01936 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y40.86 E.01936 G1 X2.26 Y34.94 E.18191 G1 F2400 G1 X2.26 Y34.1 E.02581 G1 F600 G1 X2.26 Y33.9 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y32.8 E.03649 G1 X2.26 Y20.2 E.41797 G1 X2.26 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X2.26 Y18.06 E.03196 G1 F12000 G1 X2.26 Y9.74 E.25565 G1 F600 G1 X2.26 Y8.7 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y7.6 E.03649 G1 X2.26 Y-4.6 E.4047 G1 X2.26 Y-5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X2.26 Y-5.89 E.00584 G1 F2280 G1 X3.76 Y-5.89 E.04609 M106 S255 G1 X3.76 Y-6.74 E.02612 G1 F12000 G1 X3.76 Y-10.66 E.12045 G1 X3.76 Y-11.29 E.01936 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F12000 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:55 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;55 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;55 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z55.4 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z55.4 G1 Z55 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4046 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4046 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4046 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z55.4 F30000 G1 X31.195 Y-10.545 Z55.4 G1 Z55 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4046 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4046 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z55.4 F30000 G1 X4.195 Y-10.545 Z55.4 G1 Z55 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4046 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G17 G3 Z55.4 I-1.098 J-.526 P1 F30000 G1 X3.102 Y-5.048 Z55.4 G1 Z55 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4046 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4046 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G17 G3 Z55.4 I1.213 J.097 P1 F30000 G1 X4.34 Y-10.11 Z55.4 G1 Z55 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4046 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4046 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:55.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;55.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;55.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z55.6 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z55.6 G1 Z55.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4046 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4046 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4046 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z55.6 F30000 G1 X31.195 Y-10.545 Z55.6 G1 Z55.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4046 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4046 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z55.6 F30000 G1 X4.195 Y-10.545 Z55.6 G1 Z55.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4046 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G17 G3 Z55.6 I-1.098 J-.526 P1 F30000 G1 X3.102 Y-5.048 Z55.6 G1 Z55.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4046 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4046 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G17 G3 Z55.6 I1.213 J.097 P1 F30000 G1 X4.34 Y-10.11 Z55.6 G1 Z55.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4046 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4046 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:55.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;55.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;55.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z55.8 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z55.8 G1 Z55.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4024 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z55.8 F30000 G1 X31.195 Y-10.545 Z55.8 G1 Z55.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z55.8 F30000 G1 X4.195 Y-10.545 Z55.8 G1 Z55.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G1 X3.102 Y-5.048 Z55.8 F30000 G1 Z55.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G1 X4.34 Y-10.11 Z55.8 F30000 G1 Z55.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4024 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:55.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;55.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;55.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z56 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z56 G1 Z55.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4024 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z56 F30000 G1 X31.195 Y-10.545 Z56 G1 Z55.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z56 F30000 G1 X4.195 Y-10.545 Z56 G1 Z55.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G1 X3.102 Y-5.048 Z56 F30000 G1 Z55.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G1 X4.34 Y-10.11 Z56 F30000 G1 Z55.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4024 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:55.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;55.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;55.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z56.2 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z56.2 G1 Z55.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6087 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6087 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F6087 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z56.2 F30000 G1 X31.195 Y-10.545 Z56.2 G1 Z55.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6087 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6087 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z56.2 F30000 G1 X3.498 Y-10.448 Z56.2 G1 Z55.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1860 G1 X3.498 Y-9.496 E.03158 G1 X3.498 Y-7 E.0828 G1 X3.498 Y-6.1 E.02985 M106 S255 G1 F2400 G1 X3.498 Y-5.2 E.02985 G1 F6087 G1 X3.498 Y40.648 E1.52086 G1 X3.102 Y40.648 E.01314 G1 X3.102 Y-5.2 E1.52086 G1 F2400 G1 X3.102 Y-6.1 E.02985 G1 F600 G1 X3.102 Y-6.3 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y-7.4 E.03649 G1 X3.102 Y-9.1 E.05639 G1 X3.102 Y-10.448 E.04472 G1 X3.35 Y-10.448 E.00823 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.458 Y-10.448 E.00358 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6087 M106 S255 G1 X3.905 Y-10 E.01808 G1 X3.905 Y40.745 E1.6833 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y40.8 E.00846 G1 X2.695 Y-5.2 E1.5259 G1 F2400 M73 P70 R31 G1 X2.695 Y-6.1 E.02985 G1 F600 G1 X2.695 Y-6.3 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y-7.4 E.03649 G1 X2.695 Y-9.1 E.05639 G1 X2.695 Y-10.855 E.05822 G1 X3.35 Y-10.855 E.02173 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.55 Y-10.855 E.00663 M106 S255 G1 F2400 G1 X4.45 Y-10.855 E.02985 G1 F6087 G1 X6.65 Y-10.855 E.07298 G1 X6.905 Y-10.855 E.00846 G1 X6.905 Y-10.545 E.01028 G1 X6.65 Y-10.545 E.00846 G1 X4.45 Y-10.545 E.07298 G1 X3.945 Y-10.545 E.01675 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6087 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y39.767 E1.5159 G1 X4.34 Y40.31 E.01668 G1 X4.883 Y40.31 E.01668 G1 X6.71 Y40.31 E.05614 G1 X7.34 Y40.31 E.01936 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y40.86 E.01936 G1 X2.26 Y-5.26 E1.41714 G1 F2400 G1 X2.26 Y-6.1 E.02581 G1 F600 G1 X2.26 Y-6.3 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y-7.4 E.03649 G1 X2.26 Y-9.1 E.05639 G1 X2.26 Y-11.29 E.07265 G1 X3.35 Y-11.29 E.03616 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X3.55 Y-11.29 E.00615 M106 S255 G1 F2400 G1 X4.39 Y-11.29 E.02581 G1 F6087 G1 X6.71 Y-11.29 E.07129 G1 X7.34 Y-11.29 E.01936 G1 X7.34 Y-10.11 E.03626 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 ;LAYER_CHANGE ;Z:56 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;56 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;56 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z56.4 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z56.4 G1 Z56 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z56.4 F30000 G1 X31.195 Y-10.545 Z56.4 G1 Z56 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z56.4 F30000 G1 X3.498 Y-10.448 Z56.4 G1 Z56 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:56.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;56.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;56.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z56.6 I-1.048 J.618 P1 F30000 M73 P71 R31 G1 X33.195 Y40.745 Z56.6 G1 Z56.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z56.6 F30000 G1 X31.195 Y-10.545 Z56.6 G1 Z56.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z56.6 F30000 G1 X3.498 Y-10.448 Z56.6 G1 Z56.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:56.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;56.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;56.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z56.8 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z56.8 G1 Z56.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z56.8 F30000 G1 X31.195 Y-10.545 Z56.8 G1 Z56.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z56.8 F30000 G1 X3.498 Y-10.448 Z56.8 G1 Z56.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:56.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;56.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;56.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z57 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z57 G1 Z56.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z57 F30000 G1 X31.195 Y-10.545 Z57 G1 Z56.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z57 F30000 G1 X3.498 Y-10.448 Z57 G1 Z56.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:56.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;56.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;56.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z57.2 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z57.2 G1 Z56.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z57.2 F30000 G1 X31.195 Y-10.545 Z57.2 G1 Z56.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z57.2 F30000 G1 X3.498 Y-10.448 Z57.2 G1 Z56.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:57 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;57 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;57 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z57.4 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z57.4 G1 Z57 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z57.4 F30000 G1 X31.195 Y-10.545 Z57.4 G1 Z57 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z57.4 F30000 G1 X3.498 Y-10.448 Z57.4 G1 Z57 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:57.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;57.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;57.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z57.6 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z57.6 G1 Z57.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z57.6 F30000 G1 X31.195 Y-10.545 Z57.6 G1 Z57.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z57.6 F30000 G1 X3.498 Y-10.448 Z57.6 G1 Z57.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:57.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;57.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;57.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z57.8 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z57.8 G1 Z57.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z57.8 F30000 G1 X31.195 Y-10.545 Z57.8 G1 Z57.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z57.8 F30000 G1 X3.498 Y-10.448 Z57.8 G1 Z57.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 M73 P71 R30 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:57.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;57.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;57.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z58 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z58 G1 Z57.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z58 F30000 G1 X31.195 Y-10.545 Z58 G1 Z57.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z58 F30000 G1 X3.498 Y-10.448 Z58 G1 Z57.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:57.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;57.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;57.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z58.2 I1.139 J-.429 P1 F30000 G1 X3.498 Y-10.448 Z58.2 G1 Z57.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X3.905 Y40.745 E1.70138 G1 X6.65 Y40.745 E.09106 G1 F2400 G1 X7.55 Y40.745 E.02985 G1 F600 G1 X7.75 Y40.745 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y40.745 E.03649 G1 X29.25 Y40.745 E.67671 G1 X30.35 Y40.745 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.55 Y40.745 E.00663 M106 S255 G1 F2400 G1 X31.45 Y40.745 E.02985 G1 F18000 G1 X33.195 Y40.745 E.05788 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X33.65 Y41.055 E.00846 G1 X31.45 Y41.055 E.07298 G1 F2400 G1 X30.55 Y41.055 E.02985 G1 F600 G1 X30.35 Y41.055 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X29.25 Y41.055 E.03649 G1 X8.85 Y41.055 E.67671 G1 X7.75 Y41.055 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y41.055 E.00663 M106 S255 G1 F2400 G1 X6.65 Y41.055 E.02985 G1 F18000 G1 X2.95 Y41.055 E.12274 G1 X2.695 Y41.055 E.00846 G1 X2.695 Y-10.855 E1.72195 G1 X2.95 Y-10.855 E.00846 G1 X6.65 Y-10.855 E.12274 G1 F2400 G1 X7.55 Y-10.855 E.02985 G1 F600 G1 X7.75 Y-10.855 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y-10.855 E.03649 G1 X29.25 Y-10.855 E.67671 G1 X30.35 Y-10.855 E.03649 M73 P72 R30 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.55 Y-10.855 E.00663 M106 S255 G1 F2400 G1 X31.45 Y-10.855 E.02985 G1 F18000 G1 X33.65 Y-10.855 E.07298 G1 X33.905 Y-10.855 E.00846 G1 X33.905 Y-10.545 E.01028 G1 X33.65 Y-10.545 E.00846 G1 X31.45 Y-10.545 E.07298 G1 F2400 G1 X30.55 Y-10.545 E.02985 G1 F600 G1 X30.35 Y-10.545 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X29.25 Y-10.545 E.03649 G1 X8.85 Y-10.545 E.67671 G1 X7.75 Y-10.545 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y-10.545 E.00663 M106 S255 G1 F2400 G1 X6.65 Y-10.545 E.02985 G1 F18000 G1 X3.945 Y-10.545 E.08973 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y39.767 E1.5159 G1 X4.34 Y40.31 E.01668 G1 X4.883 Y40.31 E.01668 G1 X6.71 Y40.31 E.05614 G1 F2400 G1 X7.55 Y40.31 E.02581 G1 F600 G1 X7.75 Y40.31 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y40.31 E.03649 G1 X29.25 Y40.31 E.67671 G1 X30.35 Y40.31 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X30.55 Y40.31 E.00615 M106 S255 G1 F2400 G1 X31.39 Y40.31 E.02581 G1 F12000 G1 X32.217 Y40.31 E.02541 G1 X32.76 Y40.31 E.01668 G1 X32.76 Y39.767 E.01668 G1 X32.76 Y38.94 E.02541 G1 X32.76 Y38.31 E.01936 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X33.71 Y41.49 E.01936 G1 X31.39 Y41.49 E.07129 G1 F2400 G1 X30.55 Y41.49 E.02581 G1 F600 G1 X30.35 Y41.49 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X29.25 Y41.49 E.03649 G1 X8.85 Y41.49 E.67671 G1 X7.75 Y41.49 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y41.49 E.00615 M106 S255 G1 F2400 G1 X6.71 Y41.49 E.02581 G1 F12000 G1 X2.89 Y41.49 E.11738 G1 X2.26 Y41.49 E.01936 G1 X2.26 Y-11.29 E1.62178 G1 X2.89 Y-11.29 E.01936 G1 X6.71 Y-11.29 E.11738 G1 F2400 G1 X7.55 Y-11.29 E.02581 G1 F600 G1 X7.75 Y-11.29 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y-11.29 E.03649 G1 X29.25 Y-11.29 E.67671 G1 X30.35 Y-11.29 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X30.55 Y-11.29 E.00615 M106 S255 G1 F2400 G1 X31.39 Y-11.29 E.02581 G1 F12000 G1 X33.71 Y-11.29 E.07129 G1 X34.34 Y-11.29 E.01936 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X31.39 Y-10.11 E.07129 G1 F2400 G1 X30.55 Y-10.11 E.02581 G1 F600 G1 X30.35 Y-10.11 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X29.25 Y-10.11 E.03649 G1 X8.85 Y-10.11 E.67671 G1 X7.75 Y-10.11 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y-10.11 E.00615 M106 S255 G1 F2400 G1 X6.71 Y-10.11 E.02581 G1 F12000 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z58.2 F30000 G1 X33.55 Y38.949 Z58.2 G1 Z57.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:58 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;58 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;58 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z58.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z58.4 G1 Z58 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z58.4 F30000 G1 X33.55 Y38.949 Z58.4 G1 Z58 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:58.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;58.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;58.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z58.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z58.6 G1 Z58.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z58.6 F30000 G1 X33.55 Y38.949 Z58.6 G1 Z58.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:58.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;58.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;58.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z58.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z58.8 G1 Z58.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z58.8 F30000 G1 X33.55 Y38.949 Z58.8 G1 Z58.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:58.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;58.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;58.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z59 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z59 G1 Z58.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z59 F30000 G1 X33.55 Y38.949 Z59 G1 Z58.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:58.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;58.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;58.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z59.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z59.2 G1 Z58.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 M73 P72 R29 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z59.2 F30000 G1 X33.55 Y38.949 Z59.2 G1 Z58.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:59 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;59 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;59 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z59.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z59.4 G1 Z59 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z59.4 F30000 G1 X33.55 Y38.949 Z59.4 G1 Z59 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:59.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;59.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;59.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z59.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z59.6 G1 Z59.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z59.6 F30000 G1 X33.55 Y38.949 Z59.6 G1 Z59.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:59.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;59.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;59.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z59.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z59.8 G1 Z59.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 M73 P73 R29 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z59.8 F30000 G1 X33.55 Y38.949 Z59.8 G1 Z59.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:59.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;59.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;59.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z60 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z60 G1 Z59.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z60 F30000 G1 X33.55 Y38.949 Z60 G1 Z59.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:59.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;59.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;59.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z60.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z60.2 G1 Z59.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z60.2 F30000 G1 X33.55 Y38.949 Z60.2 G1 Z59.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:60 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;60 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;60 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z60.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z60.4 G1 Z60 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z60.4 F30000 G1 X33.55 Y38.949 Z60.4 G1 Z60 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:60.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;60.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;60.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z60.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z60.6 G1 Z60.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z60.6 F30000 G1 X33.55 Y38.949 Z60.6 G1 Z60.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:60.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;60.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;60.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z60.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z60.8 G1 Z60.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 M73 P73 R28 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z60.8 F30000 G1 X33.55 Y38.949 Z60.8 G1 Z60.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:60.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;60.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;60.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z61 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z61 G1 Z60.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z61 F30000 G1 X33.55 Y38.949 Z61 G1 Z60.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:60.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;60.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;60.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z61.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z61.2 G1 Z60.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z61.2 F30000 G1 X33.55 Y38.949 Z61.2 G1 Z60.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:61 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;61 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;61 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z61.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z61.4 G1 Z61 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z61.4 F30000 G1 X33.55 Y38.949 Z61.4 G1 Z61 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:61.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;61.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;61.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z61.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z61.6 G1 Z61.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 M73 P74 R28 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z61.6 F30000 G1 X33.55 Y38.949 Z61.6 G1 Z61.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:61.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;61.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;61.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z61.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z61.8 G1 Z61.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z61.8 F30000 G1 X33.55 Y38.949 Z61.8 G1 Z61.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:61.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;61.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;61.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z62 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z62 G1 Z61.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z62 F30000 G1 X33.55 Y38.949 Z62 G1 Z61.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:61.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;61.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;61.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z62.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z62.2 G1 Z61.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z62.2 F30000 G1 X33.55 Y38.949 Z62.2 G1 Z61.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:62 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;62 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;62 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z62.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z62.4 G1 Z62 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z62.4 F30000 G1 X33.55 Y38.949 Z62.4 G1 Z62 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:62.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;62.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;62.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z62.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z62.6 G1 Z62.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 M73 P74 R27 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z62.6 F30000 G1 X33.55 Y38.949 Z62.6 G1 Z62.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:62.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;62.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;62.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z62.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z62.8 G1 Z62.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z62.8 F30000 G1 X33.55 Y38.949 Z62.8 G1 Z62.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:62.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;62.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;62.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z63 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z63 G1 Z62.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z63 F30000 G1 X33.55 Y38.949 Z63 G1 Z62.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:62.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;62.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;62.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z63.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z63.2 G1 Z62.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z63.2 F30000 G1 X33.55 Y38.949 Z63.2 G1 Z62.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:63 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;63 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;63 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z63.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z63.4 G1 Z63 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z63.4 F30000 G1 X33.55 Y38.949 Z63.4 G1 Z63 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:63.2 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;63.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;63.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z63.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z63.6 G1 Z63.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 M73 P75 R27 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z63.6 F30000 G1 X33.55 Y38.949 Z63.6 G1 Z63.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:63.4 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;63.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;63.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z63.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z63.8 G1 Z63.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z63.8 F30000 G1 X33.55 Y38.949 Z63.8 G1 Z63.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:63.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;63.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;63.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z64 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z64 G1 Z63.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z64 F30000 G1 X33.55 Y38.949 Z64 G1 Z63.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:63.8 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;63.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;63.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z64.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z64.2 G1 Z63.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z64.2 F30000 G1 X33.55 Y38.949 Z64.2 G1 Z63.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:64 ;HEIGHT:0.200001 ;BEFORE_LAYER_CHANGE ;64 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;64 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z64.4 I1.04 J-.633 P1 F30000 M73 P75 R26 G1 X3.498 Y-10.448 Z64.4 G1 Z64 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z64.4 F30000 G1 X33.55 Y38.949 Z64.4 G1 Z64 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:64.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;64.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;64.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z64.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z64.6 G1 Z64.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z64.6 F30000 G1 X33.55 Y38.949 Z64.6 G1 Z64.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:64.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;64.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;64.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z64.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z64.8 G1 Z64.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z64.8 F30000 G1 X33.55 Y38.949 Z64.8 G1 Z64.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:64.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;64.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;64.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z65 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z65 G1 Z64.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z65 F30000 G1 X33.55 Y38.949 Z65 G1 Z64.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:64.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;64.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;64.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z65.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z65.2 G1 Z64.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z65.2 F30000 G1 X33.55 Y38.949 Z65.2 G1 Z64.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:65 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;65 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;65 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z65.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z65.4 G1 Z65 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 M73 P76 R26 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z65.4 F30000 G1 X33.55 Y38.949 Z65.4 G1 Z65 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:65.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;65.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;65.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z65.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z65.6 G1 Z65.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z65.6 F30000 G1 X33.55 Y38.949 Z65.6 G1 Z65.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:65.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;65.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;65.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z65.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z65.8 G1 Z65.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z65.8 F30000 G1 X33.55 Y38.949 Z65.8 G1 Z65.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:65.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;65.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;65.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z66 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z66 G1 Z65.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 M73 P76 R25 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z66 F30000 G1 X33.55 Y38.949 Z66 G1 Z65.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:65.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;65.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;65.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z66.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z66.2 G1 Z65.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z66.2 F30000 G1 X33.55 Y38.949 Z66.2 G1 Z65.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:66 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;66 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;66 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z66.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z66.4 G1 Z66 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z66.4 F30000 G1 X33.55 Y38.949 Z66.4 G1 Z66 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:66.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;66.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;66.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z66.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z66.6 G1 Z66.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z66.6 F30000 G1 X33.55 Y38.949 Z66.6 G1 Z66.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:66.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;66.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;66.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z66.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z66.8 G1 Z66.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z66.8 F30000 G1 X33.55 Y38.949 Z66.8 G1 Z66.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:66.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;66.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;66.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z67 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z67 G1 Z66.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z67 F30000 G1 X33.55 Y38.949 Z67 G1 Z66.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:66.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;66.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;66.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z67.2 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z67.2 G1 Z66.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z67.2 F30000 G1 X33.55 Y38.949 Z67.2 G1 Z66.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:67 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;67 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;67 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z67.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z67.4 G1 Z67 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 M73 P77 R25 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z67.4 F30000 G1 X33.55 Y38.949 Z67.4 G1 Z67 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:67.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;67.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;67.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z67.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z67.6 G1 Z67.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z67.6 F30000 G1 X33.55 Y38.949 Z67.6 G1 Z67.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:67.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;67.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;67.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z67.8 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z67.8 G1 Z67.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 M73 P77 R24 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z67.8 F30000 G1 X33.55 Y38.949 Z67.8 G1 Z67.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:67.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;67.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;67.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z68 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z68 G1 Z67.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z68 F30000 G1 X33.55 Y38.949 Z68 G1 Z67.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:67.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;67.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;67.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z68.2 I-1.194 J-.236 P1 F30000 G1 X33.195 Y40.745 Z68.2 G1 Z67.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z68.2 F30000 G1 X31.195 Y-10.545 Z68.2 G1 Z67.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z68.2 F30000 G1 X3.498 Y-10.448 Z68.2 G1 Z67.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:68 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;68 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;68 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z68.4 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z68.4 G1 Z68 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z68.4 F30000 G1 X31.195 Y-10.545 Z68.4 G1 Z68 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z68.4 F30000 G1 X3.498 Y-10.448 Z68.4 G1 Z68 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:68.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;68.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;68.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z68.6 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z68.6 G1 Z68.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z68.6 F30000 G1 X31.195 Y-10.545 Z68.6 G1 Z68.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z68.6 F30000 G1 X3.498 Y-10.448 Z68.6 G1 Z68.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:68.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;68.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;68.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z68.8 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z68.8 G1 Z68.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z68.8 F30000 G1 X31.195 Y-10.545 Z68.8 G1 Z68.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z68.8 F30000 G1 X3.498 Y-10.448 Z68.8 G1 Z68.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:68.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;68.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;68.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z69 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z69 G1 Z68.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z69 F30000 G1 X31.195 Y-10.545 Z69 G1 Z68.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z69 F30000 G1 X3.498 Y-10.448 Z69 G1 Z68.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:68.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;68.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;68.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z69.2 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z69.2 G1 Z68.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z69.2 F30000 G1 X31.195 Y-10.545 Z69.2 G1 Z68.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z69.2 F30000 G1 X3.498 Y-10.448 Z69.2 G1 Z68.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 M73 P78 R24 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:69 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;69 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;69 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z69.4 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z69.4 G1 Z69 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z69.4 F30000 G1 X31.195 Y-10.545 Z69.4 G1 Z69 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z69.4 F30000 G1 X3.498 Y-10.448 Z69.4 G1 Z69 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 M73 P78 R23 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:69.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;69.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;69.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z69.6 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z69.6 G1 Z69.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z69.6 F30000 G1 X31.195 Y-10.545 Z69.6 G1 Z69.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z69.6 F30000 G1 X3.498 Y-10.448 Z69.6 G1 Z69.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:69.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;69.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;69.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z69.8 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z69.8 G1 Z69.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z69.8 F30000 G1 X31.195 Y-10.545 Z69.8 G1 Z69.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z69.8 F30000 G1 X3.498 Y-10.448 Z69.8 G1 Z69.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:69.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;69.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;69.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z70 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z70 G1 Z69.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z70 F30000 G1 X31.195 Y-10.545 Z70 G1 Z69.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z70 F30000 G1 X3.498 Y-10.448 Z70 G1 Z69.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:69.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;69.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;69.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z70.2 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z70.2 G1 Z69.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4024 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z70.2 F30000 G1 X31.195 Y-10.545 Z70.2 G1 Z69.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z70.2 F30000 G1 X4.195 Y-10.545 Z70.2 G1 Z69.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G1 X3.102 Y-5.048 Z70.2 F30000 G1 Z69.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G1 X4.34 Y-10.11 Z70.2 F30000 G1 Z69.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4024 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:70 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;70 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;70 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z70.4 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z70.4 G1 Z70 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4024 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z70.4 F30000 G1 X31.195 Y-10.545 Z70.4 G1 Z70 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z70.4 F30000 G1 X4.195 Y-10.545 Z70.4 G1 Z70 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G1 X3.102 Y-5.048 Z70.4 F30000 G1 Z70 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G1 X4.34 Y-10.11 Z70.4 F30000 G1 Z70 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4024 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:70.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;70.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;70.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z70.6 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z70.6 G1 Z70.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4024 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z70.6 F30000 G1 X31.195 Y-10.545 Z70.6 G1 Z70.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z70.6 F30000 G1 X4.195 Y-10.545 Z70.6 G1 Z70.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G1 X3.102 Y-5.048 Z70.6 F30000 G1 Z70.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G1 X4.34 Y-10.11 Z70.6 F30000 G1 Z70.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4024 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:70.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;70.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;70.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z70.8 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z70.8 G1 Z70.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4024 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z70.8 F30000 G1 X31.195 Y-10.545 Z70.8 G1 Z70.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z70.8 F30000 G1 X4.195 Y-10.545 Z70.8 G1 Z70.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G1 X3.102 Y-5.048 Z70.8 F30000 G1 Z70.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G1 X4.34 Y-10.11 Z70.8 F30000 G1 Z70.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4024 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:70.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;70.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;70.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z71 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z71 G1 Z70.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4024 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z71 F30000 G1 X31.195 Y-10.545 Z71 G1 Z70.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.082 Z71 F30000 G1 X4.195 Y-10.545 Z71 G1 Z70.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4024 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X4.195 Y-10.855 G1 X5.882 Y-10.855 ;WIPE_END G1 X3.102 Y-5.048 Z71 F30000 G1 Z70.6 M73 P79 R23 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.498 Y-5.048 E.01313 G1 X3.498 Y40.648 E1.51581 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-5.008 E1.51449 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-5.455 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4024 G1 X3.905 Y-5.455 E.04014 G1 X3.905 Y40.745 E1.53254 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-5.415 E1.5415 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P79 R22 ;WIPE_START G1 F18000 G1 X3.905 Y-5.455 G1 X3.905 Y-4.666 ;WIPE_END G1 X4.34 Y-10.11 Z71 F30000 G1 Z70.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4024 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-5.89 E1.45586 G1 X3.76 Y-5.89 E.04609 G1 X3.76 Y-11.29 E.16593 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F4024 G1 X4.05 Y-5.673 E.055 ;LAYER_CHANGE ;Z:70.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;70.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-7.673 ;WIPE_END ;AFTER_LAYER_CHANGE ;70.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z71.2 I-1.043 J.628 P1 F30000 G1 X33.195 Y40.745 Z71.2 G1 Z70.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z71.2 F30000 G1 X3.498 Y40.31 Z71.2 G1 Z70.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z71.2 F30000 G1 X3.498 Y9.952 Z71.2 G1 Z70.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z71.2 F30000 G1 X4.195 Y-10.545 Z71.2 G1 Z70.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z71.2 F30000 G1 X31.195 Y-10.545 Z71.2 G1 Z70.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:71 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;71 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;71 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z71.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z71.4 G1 Z71 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z71.4 F30000 G1 X3.498 Y40.31 Z71.4 G1 Z71 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z71.4 F30000 G1 X3.498 Y9.952 Z71.4 G1 Z71 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z71.4 F30000 G1 X4.195 Y-10.545 Z71.4 G1 Z71 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z71.4 F30000 G1 X31.195 Y-10.545 Z71.4 G1 Z71 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:71.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;71.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;71.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z71.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z71.6 G1 Z71.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z71.6 F30000 G1 X3.498 Y40.31 Z71.6 G1 Z71.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z71.6 F30000 G1 X3.498 Y9.952 Z71.6 G1 Z71.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z71.6 F30000 G1 X4.195 Y-10.545 Z71.6 G1 Z71.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z71.6 F30000 G1 X31.195 Y-10.545 Z71.6 G1 Z71.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:71.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;71.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;71.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z71.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z71.8 G1 Z71.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z71.8 F30000 G1 X3.498 Y40.31 Z71.8 G1 Z71.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z71.8 F30000 G1 X3.498 Y9.952 Z71.8 G1 Z71.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z71.8 F30000 G1 X4.195 Y-10.545 Z71.8 G1 Z71.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z71.8 F30000 G1 X31.195 Y-10.545 Z71.8 G1 Z71.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:71.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;71.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;71.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z72 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z72 G1 Z71.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z72 F30000 G1 X3.498 Y40.31 Z72 G1 Z71.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z72 F30000 G1 X3.498 Y9.952 Z72 G1 Z71.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z72 F30000 G1 X4.195 Y-10.545 Z72 G1 Z71.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z72 F30000 G1 X31.195 Y-10.545 Z72 G1 Z71.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:71.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;71.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;71.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z72.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z72.2 G1 Z71.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z72.2 F30000 G1 X3.498 Y40.31 Z72.2 G1 Z71.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z72.2 F30000 G1 X3.498 Y9.952 Z72.2 G1 Z71.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z72.2 F30000 G1 X4.195 Y-10.545 Z72.2 G1 Z71.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z72.2 F30000 G1 X31.195 Y-10.545 Z72.2 G1 Z71.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:72 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;72 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;72 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z72.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z72.4 G1 Z72 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z72.4 F30000 G1 X3.498 Y40.31 Z72.4 G1 Z72 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z72.4 F30000 G1 X3.498 Y9.952 Z72.4 G1 Z72 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z72.4 F30000 G1 X4.195 Y-10.545 Z72.4 G1 Z72 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z72.4 F30000 G1 X31.195 Y-10.545 Z72.4 G1 Z72 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:72.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;72.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;72.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z72.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z72.6 G1 Z72.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z72.6 F30000 G1 X3.498 Y40.31 Z72.6 G1 Z72.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z72.6 F30000 G1 X3.498 Y9.952 Z72.6 G1 Z72.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z72.6 F30000 G1 X4.195 Y-10.545 Z72.6 G1 Z72.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 M73 P79 R21 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z72.6 F30000 G1 X31.195 Y-10.545 Z72.6 G1 Z72.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:72.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;72.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;72.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z72.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z72.8 G1 Z72.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z72.8 F30000 G1 X3.498 Y40.31 Z72.8 G1 Z72.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 M73 P80 R21 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z72.8 F30000 G1 X3.498 Y9.952 Z72.8 G1 Z72.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z72.8 F30000 G1 X4.195 Y-10.545 Z72.8 G1 Z72.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z72.8 F30000 G1 X31.195 Y-10.545 Z72.8 G1 Z72.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:72.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;72.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;72.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z73 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z73 G1 Z72.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z73 F30000 G1 X3.498 Y40.31 Z73 G1 Z72.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z73 F30000 G1 X3.498 Y9.952 Z73 G1 Z72.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z73 F30000 G1 X4.195 Y-10.545 Z73 G1 Z72.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z73 F30000 G1 X31.195 Y-10.545 Z73 G1 Z72.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:72.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;72.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;72.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z73.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z73.2 G1 Z72.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z73.2 F30000 G1 X3.498 Y40.31 Z73.2 G1 Z72.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z73.2 F30000 G1 X3.498 Y9.952 Z73.2 G1 Z72.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z73.2 F30000 G1 X4.195 Y-10.545 Z73.2 G1 Z72.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z73.2 F30000 G1 X31.195 Y-10.545 Z73.2 G1 Z72.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:73 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;73 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;73 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z73.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z73.4 G1 Z73 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z73.4 F30000 G1 X3.498 Y40.31 Z73.4 G1 Z73 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z73.4 F30000 G1 X3.498 Y9.952 Z73.4 G1 Z73 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z73.4 F30000 G1 X4.195 Y-10.545 Z73.4 G1 Z73 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z73.4 F30000 G1 X31.195 Y-10.545 Z73.4 G1 Z73 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:73.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;73.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;73.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z73.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z73.6 G1 Z73.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z73.6 F30000 G1 X3.498 Y40.31 Z73.6 G1 Z73.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z73.6 F30000 G1 X3.498 Y9.952 Z73.6 G1 Z73.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z73.6 F30000 G1 X4.195 Y-10.545 Z73.6 G1 Z73.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z73.6 F30000 G1 X31.195 Y-10.545 Z73.6 G1 Z73.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:73.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;73.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;73.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z73.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z73.8 G1 Z73.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z73.8 F30000 G1 X3.498 Y40.31 Z73.8 G1 Z73.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z73.8 F30000 G1 X3.498 Y9.952 Z73.8 G1 Z73.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z73.8 F30000 G1 X4.195 Y-10.545 Z73.8 G1 Z73.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z73.8 F30000 G1 X31.195 Y-10.545 Z73.8 G1 Z73.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:73.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;73.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;73.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z74 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z74 G1 Z73.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z74 F30000 G1 X3.498 Y40.31 Z74 G1 Z73.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z74 F30000 G1 X3.498 Y9.952 Z74 G1 Z73.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z74 F30000 G1 X4.195 Y-10.545 Z74 G1 Z73.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z74 F30000 G1 X31.195 Y-10.545 Z74 G1 Z73.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:73.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;73.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;73.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z74.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z74.2 G1 Z73.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z74.2 F30000 G1 X3.498 Y40.31 Z74.2 G1 Z73.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z74.2 F30000 G1 X3.498 Y9.952 Z74.2 G1 Z73.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z74.2 F30000 G1 X4.195 Y-10.545 Z74.2 G1 Z73.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z74.2 F30000 G1 X31.195 Y-10.545 Z74.2 G1 Z73.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:74 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;74 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;74 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z74.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z74.4 G1 Z74 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 M73 P80 R20 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z74.4 F30000 G1 X3.498 Y40.31 Z74.4 G1 Z74 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z74.4 F30000 G1 X3.498 Y9.952 Z74.4 G1 Z74 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z74.4 F30000 G1 X4.195 Y-10.545 Z74.4 G1 Z74 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z74.4 F30000 G1 X31.195 Y-10.545 Z74.4 G1 Z74 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:74.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;74.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;74.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z74.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z74.6 G1 Z74.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z74.6 F30000 G1 X3.498 Y40.31 Z74.6 G1 Z74.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 M73 P81 R20 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z74.6 F30000 G1 X3.498 Y9.952 Z74.6 G1 Z74.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z74.6 F30000 G1 X4.195 Y-10.545 Z74.6 G1 Z74.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z74.6 F30000 G1 X31.195 Y-10.545 Z74.6 G1 Z74.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:74.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;74.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;74.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z74.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z74.8 G1 Z74.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z74.8 F30000 G1 X3.498 Y40.31 Z74.8 G1 Z74.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z74.8 F30000 G1 X3.498 Y9.952 Z74.8 G1 Z74.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z74.8 F30000 G1 X4.195 Y-10.545 Z74.8 G1 Z74.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z74.8 F30000 G1 X31.195 Y-10.545 Z74.8 G1 Z74.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:74.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;74.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;74.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z75 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z75 G1 Z74.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2071 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z75 F30000 G1 X3.498 Y40.31 Z75 G1 Z74.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z75 F30000 G1 X3.498 Y9.952 Z75 G1 Z74.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2071 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z75 F30000 G1 X4.195 Y-10.545 Z75 G1 Z74.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X4.195 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.0899 G1 X6.905 Y-10.545 E.01028 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X4.34 Y-6.11 E.12291 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.11 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2071 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z75 F30000 G1 X31.195 Y-10.545 Z75 G1 Z74.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2071 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2071 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:74.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;74.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;74.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z75.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z75.2 G1 Z74.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2080 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2080 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2080 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z75.2 F30000 G1 X3.498 Y40.31 Z75.2 G1 Z74.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2080 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2080 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2080 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z75.2 F30000 G1 X3.498 Y9.952 Z75.2 G1 Z74.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2080 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2080 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2080 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z75.2 F30000 G1 X4.195 Y-10.545 Z75.2 G1 Z74.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2080 G1 X4.195 Y-10.969 E.01406 G1 X6.905 Y-10.969 E.0899 G1 X6.905 Y-10.545 E.01406 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2080 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-10.66 E.12045 G1 X3.76 Y-11.404 E.02286 G1 X4.504 Y-11.404 E.02286 G1 X6.596 Y-11.404 E.06428 G1 X7.34 Y-11.404 E.02286 G1 X7.34 Y-10.11 E.03976 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2080 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z75.2 F30000 G1 X31.195 Y-10.545 Z75.2 G1 Z74.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2080 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2080 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:75 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;75 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;75 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z75.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z75.4 G1 Z75 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2118 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2118 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2118 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z75.4 F30000 G1 X3.498 Y40.31 Z75.4 G1 Z75 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2118 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2118 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2118 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z75.4 F30000 G1 X3.498 Y9.952 Z75.4 G1 Z75 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2118 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2118 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2118 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z75.4 F30000 G1 X4.195 Y-10.545 Z75.4 G1 Z75 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2118 G1 X4.195 Y-11.176 E.02094 G1 X6.905 Y-11.176 E.0899 G1 X6.905 Y-10.545 E.02094 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2118 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-10.774 E.12395 G1 X3.76 Y-11.611 E.02572 G1 X7.34 Y-11.611 E.11 M106 S255 G1 X7.34 Y-10.11 E.04612 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2118 G1 X4.05 Y-6.328 E.04726 G1 X4.399 Y-10.861 F30000 ;WIDTH:0.267246 G1 F2118 G1 X6.701 Y-10.861 E.0421 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.701 Y-10.861 ;WIPE_END G1 X12.333 Y-10.77 Z75.4 F30000 G1 X31.195 Y-10.545 Z75.4 G1 Z75 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2118 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2118 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:75.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;75.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;75.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z75.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z75.6 G1 Z75.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2127 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2127 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2127 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z75.6 F30000 G1 X3.498 Y40.31 Z75.6 G1 Z75.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2127 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2127 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2127 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z75.6 F30000 G1 X3.498 Y9.952 Z75.6 G1 Z75.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2127 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2127 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2127 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z75.6 F30000 G1 X4.195 Y-10.545 Z75.6 G1 Z75.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2127 G1 X4.195 Y-11.384 E.02783 G1 X6.905 Y-11.384 E.0899 G1 X6.905 Y-10.545 E.02783 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2127 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-10.981 E.13031 G1 X3.76 Y-11.819 E.02575 G1 X7.34 Y-11.819 E.11 M106 S255 G1 X7.34 Y-10.11 E.05251 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2127 G1 X4.05 Y-6.328 E.04726 G1 X4.399 Y-10.964 F30000 ;WIDTH:0.474842 G1 F2127 G1 X6.701 Y-10.964 E.08105 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.701 Y-10.964 ;WIPE_END G1 X12.333 Y-10.844 Z75.6 F30000 G1 X31.195 Y-10.545 Z75.6 G1 Z75.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2127 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2127 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:75.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;75.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;75.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z75.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z75.8 G1 Z75.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2137 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2137 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2137 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z75.8 F30000 G1 X3.498 Y40.31 Z75.8 G1 Z75.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2137 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2137 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2137 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z75.8 F30000 G1 X3.498 Y9.952 Z75.8 G1 Z75.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2137 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2137 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2137 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.268 Y3.478 Z75.8 F30000 G1 X4.195 Y-10.545 Z75.8 G1 Z75.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2137 G1 X4.195 Y-11.592 E.03472 G1 X6.905 Y-11.592 E.0899 G1 X6.905 Y-10.545 E.03472 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2137 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-11.189 E.13671 G1 X3.76 Y-12.027 E.02575 G1 X7.34 Y-12.027 E.11 M106 S255 G1 X7.34 Y-10.11 E.0589 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2137 G1 X4.05 Y-6.328 E.04726 G1 X4.399 Y-11.068 F30000 ;WIDTH:0.682448 G1 F2137 G1 X6.701 Y-11.068 E.12001 G1 E-.8 F1800 ;WIPE_START G1 F11966.734 G1 X4.701 Y-11.068 ;WIPE_END G1 X12.332 Y-10.918 Z75.8 F30000 G1 X31.195 Y-10.545 Z75.8 G1 Z75.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2137 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2137 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:75.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;75.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;75.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z76 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z76 G1 Z75.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2169 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2169 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2169 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z76 F30000 G1 X3.498 Y40.31 Z76 G1 Z75.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2169 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2169 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 M73 P81 R19 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2169 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z76 F30000 G1 X3.498 Y9.952 Z76 G1 Z75.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2169 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2169 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2169 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.41 Y3.478 Z76 F30000 G1 X4.602 Y-10.992 Z76 G1 Z75.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2169 G1 X4.602 Y-11.392 E.01328 G1 X6.498 Y-11.392 E.06289 G1 X6.498 Y-10.952 E.0146 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2169 G1 X4.195 Y-11.799 E.0416 G1 X6.905 Y-11.799 E.0899 G1 X6.905 Y-10.545 E.0416 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2169 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-11.397 E.1431 G1 X3.76 Y-12.234 E.02572 G1 X7.34 Y-12.234 E.11 M106 S255 G1 X7.34 Y-11.397 E.02572 G1 X7.34 Y-10.74 E.02019 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2169 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X11.657 Y-8.949 Z76 F30000 G1 X31.195 Y-10.545 Z76 G1 Z75.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2169 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2169 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:75.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;75.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;75.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z76.2 I-1.082 J-.558 P1 F30000 G1 X31.195 Y-10.545 Z76.2 G1 Z75.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2232 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2232 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z76.2 F30000 G1 X4.602 Y-10.992 Z76.2 G1 Z75.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2232 G1 X4.602 Y-11.6 E.02016 G1 X6.498 Y-11.6 E.06289 G1 X6.498 Y-10.952 E.02148 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2232 G1 X4.195 Y-12.007 E.04849 G1 X6.905 Y-12.007 E.0899 G1 X6.905 Y-10.545 E.04849 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2232 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-11.604 E.14946 G1 X3.76 Y-12.442 E.02575 G1 X7.34 Y-12.442 E.11 M106 S255 G1 X7.34 Y-11.604 E.02575 G1 X7.34 Y-10.74 E.02655 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2232 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X4.806 Y-11.276 Z76.2 F30000 G1 Z75.8 G1 E.8 F1800 ;WIDTH:0.283484 G1 F2232 G1 X6.294 Y-11.276 E.02918 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.806 Y-11.276 ;WIPE_END G1 X4.336 Y-3.658 Z76.2 F30000 G1 X3.498 Y9.952 Z76.2 G1 Z75.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2232 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2232 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2232 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z76.2 F30000 G1 X3.498 Y40.31 Z76.2 G1 Z75.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2232 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2232 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2232 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z76.2 F30000 G1 X33.195 Y40.745 Z76.2 G1 Z75.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2232 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2232 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2232 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:76 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;76 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;76 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z76.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z76.4 G1 Z76 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2246 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2246 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z76.4 F30000 G1 X4.602 Y-10.992 Z76.4 G1 Z76 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2246 G1 X4.602 Y-11.807 E.02705 G1 X6.498 Y-11.807 E.06289 G1 X6.498 Y-10.952 E.02837 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2246 G1 X4.195 Y-12.214 E.05538 G1 X6.905 Y-12.214 E.0899 G1 X6.905 Y-10.545 E.05538 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2246 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-11.812 E.15585 G1 X3.76 Y-12.649 E.02572 M73 P82 R19 G1 X7.34 Y-12.649 E.11 M106 S255 G1 X7.34 Y-11.812 E.02572 G1 X7.34 Y-10.74 E.03294 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2246 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X4.806 Y-11.38 Z76.4 F30000 G1 Z76 G1 E.8 F1800 ;WIDTH:0.491088 G1 F2246 G1 X6.294 Y-11.38 E.05437 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.806 Y-11.38 ;WIPE_END G1 X4.339 Y-3.762 Z76.4 F30000 G1 X3.498 Y9.952 Z76.4 G1 Z76 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2246 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2246 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2246 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z76.4 F30000 G1 X3.498 Y40.31 Z76.4 G1 Z76 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2246 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2246 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2246 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z76.4 F30000 G1 X33.195 Y40.745 Z76.4 G1 Z76 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2246 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2246 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2246 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:76.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;76.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;76.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z76.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z76.6 G1 Z76.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2343 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2343 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z76.6 F30000 G1 X4.602 Y-10.992 Z76.6 G1 Z76.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2343 G1 X4.602 Y-12.015 E.03394 G1 X6.498 Y-12.015 E.06289 G1 X6.498 Y-10.952 E.03526 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2343 G1 X4.195 Y-12.422 E.06226 G1 X6.905 Y-12.422 E.0899 G1 X6.905 Y-10.545 E.06226 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2343 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.019 E.16221 G1 X3.76 Y-12.71 E.02123 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-12.857 E.00452 G1 X8.84 Y-12.857 E.20219 M106 S255 G1 X8.84 Y-12.71 E.00452 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.019 E.02123 G1 X7.34 Y-10.74 E.0393 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2343 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.13 Y-11.32 Z76.6 F30000 G1 Z76.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.370803 G1 F2343 G1 X6.13 Y-11.647 E.00876 G1 X4.97 Y-11.647 E.03102 G1 X4.97 Y-11.32 E.00876 G1 X6.09 Y-11.32 E.02995 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.97 Y-11.32 G1 X4.97 Y-11.647 G1 X5.521 Y-11.647 ;WIPE_END G1 X4.809 Y-4.048 Z76.6 F30000 G1 X3.498 Y9.952 Z76.6 G1 Z76.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2343 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2343 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2343 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z76.6 F30000 G1 X3.498 Y40.648 Z76.6 G1 Z76.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2343 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2343 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2343 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z76.6 F30000 G1 X33.195 Y40.745 Z76.6 G1 Z76.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2343 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2343 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2343 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:76.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;76.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;76.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z76.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z76.8 G1 Z76.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2357 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2357 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z76.8 F30000 G1 X4.602 Y-10.992 Z76.8 G1 Z76.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2357 G1 X4.602 Y-12.223 E.04082 G1 X6.498 Y-12.223 E.06289 G1 X6.498 Y-10.952 E.04214 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2357 G1 X4.195 Y-12.63 E.06915 G1 X6.905 Y-12.63 E.0899 G1 X6.905 Y-10.545 E.06915 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2357 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.065 E.01091 G1 X8.84 Y-13.065 E.20219 M106 S255 G1 X8.84 Y-12.71 E.01091 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2357 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.079 Y-11.371 Z76.8 F30000 G1 Z76.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.474605 G1 F2357 G1 X6.079 Y-11.803 E.01519 G1 X5.021 Y-11.803 E.03718 G1 X5.021 Y-11.371 E.01519 G1 X6.039 Y-11.371 E.03578 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.021 Y-11.371 G1 X5.021 Y-11.803 G1 X5.573 Y-11.803 ;WIPE_END G1 X4.848 Y-4.205 Z76.8 F30000 G1 X3.498 Y9.952 Z76.8 G1 Z76.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2357 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2357 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2357 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z76.8 F30000 G1 X3.498 Y40.648 Z76.8 G1 Z76.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2357 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2357 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2357 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z76.8 F30000 G1 X33.195 Y40.745 Z76.8 G1 Z76.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2357 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2357 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2357 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:76.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;76.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;76.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z77 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z77 G1 Z76.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2423 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2423 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z77 F30000 G1 X4.602 Y-10.992 Z77 G1 Z76.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2423 G1 X4.602 Y-12.43 E.04771 G1 X6.498 Y-12.43 E.06289 G1 X6.498 Y-10.952 E.04903 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2423 G1 X4.195 Y-12.837 E.07604 G1 X6.905 Y-12.837 E.0899 G1 X6.905 Y-10.545 E.07604 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2423 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.272 E.01727 G1 X8.84 Y-13.272 E.20219 M106 S255 G1 X8.84 Y-12.71 E.01727 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2423 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X2.478 Y-12.991 Z77 F30000 G1 Z76.6 G1 E.8 F1800 ;WIDTH:0.17012 G1 F2423 G1 X3.977 Y-12.991 E.01555 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2423 G1 X6.106 Y-12.038 E.02132 G1 X4.994 Y-12.038 E.03416 G1 X4.994 Y-11.344 E.02132 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.341 Y-11.691 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.359728 G1 F2423 G1 X5.719 Y-11.691 E.00975 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.123 Y-12.991 F30000 ;TYPE:Gap infill ;WIDTH:0.170122 G1 F2423 G1 X8.623 Y-12.991 E.01555 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.123 Y-12.991 ;WIPE_END G1 X5.931 Y-5.452 Z77 F30000 G1 X3.498 Y9.952 Z77 G1 Z76.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2423 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2423 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2423 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z77 F30000 G1 X3.498 Y40.648 Z77 G1 Z76.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2423 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2423 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2423 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z77 F30000 G1 X33.195 Y40.745 Z77 G1 Z76.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2423 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2423 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2423 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:76.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;76.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;76.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z77.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z77.2 G1 Z76.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2443 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2443 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z77.2 F30000 G1 X4.602 Y-10.992 Z77.2 G1 Z76.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2443 G1 X4.602 Y-12.638 E.05459 G1 X6.498 Y-12.638 E.06289 G1 X6.498 Y-10.952 E.05592 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2443 G1 X4.195 Y-10.8 E.00846 G1 X4.195 Y-12.582 E.05911 G1 X4.195 Y-13.045 E.01536 G1 X4.658 Y-13.045 E.01536 G1 X6.442 Y-13.045 E.05918 G1 X6.905 Y-13.045 E.01536 G1 X6.905 Y-12.582 E.01536 G1 X6.905 Y-10.8 E.05911 G1 X6.905 Y-10.545 E.00846 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2443 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.48 E.02366 G1 X8.84 Y-13.48 E.20219 M106 S255 G1 X8.84 Y-12.71 E.02366 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2443 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X2.478 Y-13.095 Z77.2 F30000 G1 Z76.8 G1 E.8 F1800 ;WIDTH:0.377718 G1 F2443 G1 X3.977 Y-13.095 E.04092 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2443 G1 X6.106 Y-12.246 E.0277 G1 X4.994 Y-12.246 E.03416 G1 X4.994 Y-11.344 E.0277 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.445 Y-11.795 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.567326 G1 F2443 G1 X5.615 Y-11.795 E.00727 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.123 Y-13.095 F30000 ;TYPE:Gap infill ;WIDTH:0.377718 G1 F2443 G1 X8.623 Y-13.095 E.04092 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.123 Y-13.095 ;WIPE_END G1 X5.937 Y-5.555 Z77.2 F30000 G1 X3.498 Y9.952 Z77.2 G1 Z76.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2443 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2443 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2443 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z77.2 F30000 G1 X3.498 Y40.648 Z77.2 G1 Z76.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2443 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2443 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2443 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z77.2 F30000 G1 X33.195 Y40.745 Z77.2 G1 Z76.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2443 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2443 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2443 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:77 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;77 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;77 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z77.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z77.4 G1 Z77 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2475 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2475 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z77.4 F30000 G1 X4.602 Y-10.992 Z77.4 G1 Z77 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2475 G1 X4.602 Y-12.845 E.06148 G1 X6.498 Y-12.845 E.06289 G1 X6.498 Y-10.952 E.0628 G1 X4.602 Y-10.952 E.06288 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2475 G1 X4.195 Y-10.8 E.00846 G1 X4.195 Y-12.79 E.06601 G1 X4.195 Y-13.252 E.01533 G1 X4.658 Y-13.252 E.01536 G1 X6.442 Y-13.252 E.05918 G1 X6.905 Y-13.252 E.01536 G1 X6.905 Y-12.79 E.01533 G1 X6.905 Y-10.8 E.06601 G1 X6.905 Y-10.545 E.00846 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2475 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.687 E.03002 G1 X8.84 Y-13.687 E.20219 M106 S255 G1 X8.84 Y-12.71 E.03002 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2475 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X2.478 Y-13.199 Z77.4 F30000 G1 Z77 G1 E.8 F1800 ;WIDTH:0.585322 G1 F2475 G1 X3.977 Y-13.199 E.0663 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2475 G1 X6.106 Y-12.453 E.03408 G1 X4.994 Y-12.453 E.03416 G1 X4.994 Y-11.344 E.03408 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.408925 G1 F2475 G1 X5.734 Y-12.082 E.01092 G1 X5.366 Y-12.082 E.01099 G1 X5.366 Y-11.716 E.01092 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.123 Y-13.199 F30000 ;TYPE:Gap infill ;WIDTH:0.585322 G1 F2475 G1 X8.623 Y-13.199 E.0663 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.123 Y-13.199 ;WIPE_END G1 X5.942 Y-5.658 Z77.4 F30000 G1 X3.498 Y9.952 Z77.4 G1 Z77 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2475 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2475 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2475 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z77.4 F30000 G1 X3.498 Y40.648 Z77.4 G1 Z77 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2475 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2475 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2475 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z77.4 F30000 G1 X33.195 Y40.745 Z77.4 G1 Z77 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2475 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2475 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2475 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:77.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;77.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;77.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z77.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z77.6 G1 Z77.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2535 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2535 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z77.6 F30000 G1 X4.602 Y-10.992 Z77.6 G1 Z77.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2535 G1 X4.602 Y-13.053 E.06837 G1 X6.498 Y-13.053 E.06289 G1 X6.498 Y-10.952 E.06969 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2535 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-13.46 E.01045 G1 X3.158 Y-13.46 E.01536 G1 X7.942 Y-13.46 E.15869 G1 X8.405 Y-13.46 E.01536 G1 X8.405 Y-13.145 E.01045 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2535 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 M73 P82 R18 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.895 E.03641 G1 X8.84 Y-13.895 E.20219 M106 S255 G1 X8.84 Y-12.71 E.03641 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2535 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z77.6 F30000 G1 Z77.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2535 G1 X6.106 Y-12.661 E.04046 G1 X4.994 Y-12.661 E.03416 G1 X4.994 Y-11.344 E.04046 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F2535 G1 X5.734 Y-12.289 E.01713 G1 X5.366 Y-12.289 E.01099 G1 X5.366 Y-11.716 E.01713 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.366 Y-11.716 G1 X5.366 Y-12.289 G1 X5.734 Y-12.289 G1 X5.734 Y-11.716 ;WIPE_END G1 X4.95 Y-4.124 Z77.6 F30000 G1 X3.498 Y9.952 Z77.6 G1 Z77.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2535 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2535 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2535 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z77.6 F30000 G1 X3.498 Y40.648 Z77.6 G1 Z77.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2535 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2535 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2535 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z77.6 F30000 G1 X33.195 Y40.745 Z77.6 G1 Z77.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2535 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2535 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2535 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:77.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;77.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;77.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z77.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z77.8 G1 Z77.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2600 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2600 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z77.8 F30000 G1 X4.602 Y-10.992 Z77.8 G1 Z77.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2600 G1 X4.602 Y-13.261 E.07527 G1 X6.498 Y-13.261 E.06289 G1 X6.498 Y-10.952 E.07659 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2600 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-13.668 E.01735 G1 X3.158 Y-13.668 E.01536 G1 X7.942 Y-13.668 E.15869 G1 X8.405 Y-13.668 E.01536 G1 X8.405 Y-13.145 E.01735 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2600 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-14.103 E.0428 G1 X8.84 Y-14.103 E.20219 M106 S255 G1 X8.84 Y-12.71 E.0428 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2600 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X2.899 Y-13.406 Z77.8 F30000 G1 Z77.4 G1 E.8 F1800 ;WIDTH:0.158444 G1 F2600 G1 X4.399 Y-13.406 E.01412 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2600 G1 X6.106 Y-12.868 E.04684 G1 X4.994 Y-12.868 E.03416 G1 X4.994 Y-11.344 E.04684 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F2600 G1 X5.734 Y-12.496 E.02334 G1 X5.366 Y-12.496 E.01099 G1 X5.366 Y-11.716 E.02334 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.701 Y-13.406 F30000 ;TYPE:Gap infill ;WIDTH:0.158444 G1 F2600 G1 X8.201 Y-13.406 E.01412 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.701 Y-13.406 ;WIPE_END G1 X5.664 Y-5.845 Z77.8 F30000 G1 X3.498 Y9.952 Z77.8 G1 Z77.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2600 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2600 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2600 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z77.8 F30000 G1 X3.498 Y40.648 Z77.8 G1 Z77.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2600 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2600 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2600 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z77.8 F30000 G1 X33.195 Y40.745 Z77.8 G1 Z77.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2600 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2600 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2600 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:77.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;77.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;77.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z78 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z78 G1 Z77.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2624 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2624 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z78 F30000 G1 X4.602 Y-10.992 Z78 G1 Z77.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2624 G1 X4.602 Y-13.468 E.08213 G1 X6.498 Y-13.468 E.06289 G1 X6.498 Y-10.952 E.08346 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2624 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-13.875 E.02422 G1 X3.158 Y-13.875 E.01536 G1 X7.942 Y-13.875 E.15869 G1 X8.405 Y-13.875 E.01536 G1 X8.405 Y-13.145 E.02422 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2624 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-14.31 E.04916 G1 X8.84 Y-14.31 E.20219 M106 S255 G1 X8.84 Y-12.71 E.04916 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2624 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X2.899 Y-13.51 Z78 F30000 G1 Z77.6 G1 E.8 F1800 ;WIDTH:0.366042 G1 F2624 G1 X4.399 Y-13.51 E.0395 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2624 G1 X6.106 Y-13.076 E.05322 G1 X4.994 Y-13.076 E.03416 G1 X4.994 Y-11.344 E.05322 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F2624 G1 X5.734 Y-12.704 E.02956 G1 X5.366 Y-12.704 E.01099 G1 X5.366 Y-11.716 E.02956 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.701 Y-13.51 F30000 ;TYPE:Gap infill ;WIDTH:0.366042 G1 F2624 G1 X8.201 Y-13.51 E.0395 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.701 Y-13.51 ;WIPE_END G1 X5.669 Y-5.948 Z78 F30000 G1 X3.498 Y9.952 Z78 G1 Z77.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2624 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2624 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2624 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z78 F30000 G1 X3.498 Y40.648 Z78 G1 Z77.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2624 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2624 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2624 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z78 F30000 G1 X33.195 Y40.745 Z78 G1 Z77.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2624 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 M73 P83 R18 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2624 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2624 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:77.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;77.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;77.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z78.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z78.2 G1 Z77.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2648 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2648 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z78.2 F30000 G1 X4.602 Y-10.992 Z78.2 G1 Z77.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2648 G1 X4.602 Y-13.676 E.08903 G1 X6.498 Y-13.676 E.06289 G1 X6.498 Y-10.952 E.09036 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2648 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-14.083 E.03112 G1 X3.158 Y-14.083 E.01536 G1 X7.942 Y-14.083 E.15869 G1 X8.405 Y-14.083 E.01536 G1 X8.405 Y-13.145 E.03112 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2648 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 F2640 G1 X2.26 Y-14.518 E.05555 G1 X8.84 Y-14.518 E.20219 M106 S255 G1 X8.84 Y-12.71 E.05555 G1 F2648 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2648 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X2.899 Y-13.614 Z78.2 F30000 G1 Z77.8 G1 E.8 F1800 ;WIDTH:0.573638 G1 F2648 G1 X4.399 Y-13.614 E.06487 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2648 G1 X6.106 Y-13.284 E.05959 G1 X4.994 Y-13.284 E.03416 G1 X4.994 Y-11.344 E.05959 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F2648 G1 X5.734 Y-12.911 E.03577 G1 X5.366 Y-12.911 E.01099 G1 X5.366 Y-11.716 E.03577 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.701 Y-13.614 F30000 ;TYPE:Gap infill ;WIDTH:0.573638 G1 F2648 G1 X8.201 Y-13.614 E.06487 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.701 Y-13.614 ;WIPE_END G1 X5.673 Y-6.051 Z78.2 F30000 G1 X3.498 Y9.952 Z78.2 G1 Z77.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2648 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2648 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2648 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z78.2 F30000 G1 X3.498 Y40.648 Z78.2 G1 Z77.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2648 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2648 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2648 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z78.2 F30000 G1 X33.195 Y40.745 Z78.2 G1 Z77.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2648 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2648 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2648 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:78 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;78 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;78 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z78.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z78.4 G1 Z78 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2701 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2701 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z78.4 F30000 G1 X4.602 Y-10.992 Z78.4 G1 Z78 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2701 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-13.883 E.01098 G1 X7.998 Y-13.883 E.16241 G1 X7.998 Y-13.552 E.01098 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2701 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-14.29 E.03798 G1 X3.158 Y-14.29 E.01536 G1 X7.942 Y-14.29 E.15869 G1 X8.405 Y-14.29 E.01536 G1 X8.405 Y-13.145 E.03798 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2701 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-13.888 E.01684 G1 F2640 G1 X2.26 Y-14.725 E.02572 G1 X8.84 Y-14.725 E.20219 M106 S255 G1 X8.84 Y-13.888 E.02572 G1 F2701 G1 X8.84 Y-13.34 E.01684 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2701 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z78.4 F30000 G1 Z78 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2701 G1 X6.106 Y-13.491 E.06597 G1 X4.994 Y-13.491 E.03416 G1 X4.994 Y-11.344 E.06597 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F2701 G1 X5.734 Y-13.119 E.04198 G1 X5.366 Y-13.119 E.01099 G1 X5.366 Y-11.716 E.04198 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.366 Y-11.716 G1 X5.366 Y-13.119 G1 X5.636 Y-13.119 ;WIPE_END G1 X4.932 Y-5.519 Z78.4 F30000 G1 X3.498 Y9.952 Z78.4 G1 Z78 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2701 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2701 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2701 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z78.4 F30000 G1 X3.498 Y40.648 Z78.4 G1 Z78 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2701 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2701 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2701 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z78.4 F30000 G1 X33.195 Y40.745 Z78.4 G1 Z78 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2701 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2701 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2701 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:78.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;78.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;78.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z78.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z78.6 G1 Z78.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2761 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2761 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z78.6 F30000 G1 X4.602 Y-10.992 Z78.6 G1 Z78.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2761 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-14.091 E.01788 G1 X7.998 Y-14.091 E.16241 G1 X7.998 Y-13.552 E.01788 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2761 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-14.498 E.04488 G1 X3.158 Y-14.498 E.01536 G1 X7.942 Y-14.498 E.15869 G1 X8.405 Y-14.498 E.01536 G1 X8.405 Y-13.145 E.04488 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2761 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-14.095 E.0232 G1 F2640 G1 X2.26 Y-14.933 E.02575 G1 X8.84 Y-14.933 E.20219 M106 S255 G1 X8.84 Y-14.095 E.02575 G1 F2761 G1 X8.84 Y-13.34 E.0232 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2761 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z78.6 F30000 G1 Z78.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2761 G1 X6.106 Y-13.327 E.06093 G1 X5.918 Y-13.456 E.00702 G1 X5.902 Y-13.699 E.00746 G1 X5.198 Y-13.699 E.02165 G1 X5.182 Y-13.456 E.00746 G1 X5.146 Y-13.401 E.00203 G1 X4.994 Y-13.327 E.00519 G1 X4.994 Y-11.344 E.06093 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F2761 G1 X5.734 Y-13.124 E.04212 G1 X5.575 Y-13.31 E.00731 G1 X5.528 Y-13.327 E.0015 G1 X5.417 Y-13.145 E.00637 G1 X5.366 Y-13.124 E.00164 G1 X5.366 Y-11.716 E.04212 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.794 Y-13.821 F30000 ;TYPE:Gap infill ;WIDTH:0.17468 G1 F2761 G1 X6.294 Y-13.821 E.01611 G1 X4.806 Y-13.822 F30000 ;WIDTH:0.174682 G1 F2761 G1 X3.306 Y-13.822 E.01611 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.806 Y-13.822 ;WIPE_END G1 X4.386 Y-6.201 Z78.6 F30000 G1 X3.498 Y9.952 Z78.6 G1 Z78.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2761 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2761 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2761 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z78.6 F30000 G1 X3.498 Y40.648 Z78.6 G1 Z78.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2761 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2761 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2761 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z78.6 F30000 G1 X33.195 Y40.745 Z78.6 G1 Z78.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2761 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2761 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2761 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:78.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;78.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;78.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z78.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z78.8 G1 Z78.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2784 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2784 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z78.8 F30000 G1 X4.602 Y-10.992 Z78.8 G1 Z78.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2784 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-14.299 E.02478 G1 X7.998 Y-14.299 E.16241 G1 X7.998 Y-13.552 E.02478 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2784 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-14.706 E.05178 G1 X3.158 Y-14.706 E.01536 G1 X7.942 Y-14.706 E.15869 G1 X8.405 Y-14.706 E.01536 G1 X8.405 Y-13.145 E.05178 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2784 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-14.303 E.02959 G1 F2640 G1 X2.26 Y-15.141 E.02575 G1 X8.84 Y-15.141 E.20219 M106 S255 G1 X8.84 Y-14.303 E.02575 G1 F2784 G1 X8.84 Y-13.34 E.02959 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2784 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z78.8 F30000 G1 Z78.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2784 G1 X6.106 Y-13.327 E.06093 G1 X5.92 Y-13.45 E.00684 G1 X5.902 Y-13.906 E.01404 G1 X5.198 Y-13.906 E.02165 G1 X5.18 Y-13.45 E.01404 G1 X4.994 Y-13.333 E.00674 G1 X4.994 Y-11.344 E.0611 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.406706 G1 F2784 G1 X5.734 Y-13.124 E.04172 G1 X5.592 Y-13.295 E.00659 G1 X5.55 Y-13.483 E.00573 G1 X5.508 Y-13.295 E.00573 G1 X5.366 Y-13.124 E.00659 G1 X5.366 Y-11.716 E.04172 G1 X5.694 Y-11.716 E.0097 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.794 Y-13.925 F30000 ;TYPE:Gap infill ;WIDTH:0.382286 G1 F2784 G1 X6.294 Y-13.925 E.04148 G1 X4.806 Y-13.925 F30000 G1 F2784 G1 X3.306 Y-13.925 E.04148 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.806 Y-13.925 ;WIPE_END G1 X4.388 Y-6.304 Z78.8 F30000 G1 X3.498 Y9.952 Z78.8 G1 Z78.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2784 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2784 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2784 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z78.8 F30000 G1 X3.498 Y40.648 Z78.8 G1 Z78.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2784 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2784 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2784 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z78.8 F30000 G1 X33.195 Y40.745 Z78.8 G1 Z78.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2784 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2784 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2784 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:78.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;78.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;78.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z79 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z79 G1 Z78.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2810 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2810 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z79 F30000 G1 X4.602 Y-10.992 Z79 G1 Z78.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2810 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-14.506 E.03165 G1 X7.998 Y-14.506 E.16241 G1 X7.998 Y-13.552 E.03165 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2810 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-14.913 E.05865 G1 X3.158 Y-14.913 E.01536 G1 X7.942 Y-14.913 E.15869 G1 X8.405 Y-14.913 E.01536 G1 X8.405 Y-13.145 E.05865 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2810 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-14.511 E.03598 G1 F2640 G1 X2.26 Y-15.348 E.02572 G1 X8.84 Y-15.348 E.20219 M106 S255 G1 X8.84 Y-14.511 E.02572 G1 F2810 G1 X8.84 Y-13.34 E.03598 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2810 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X3.306 Y-14.029 Z79 F30000 G1 Z78.6 G1 E.8 F1800 ;WIDTH:0.589882 G1 F2810 G1 X4.806 Y-14.029 E.06686 G1 X5.55 Y-13.762 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.370468 G1 F2810 G1 X5.55 Y-13.523 E.00636 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.406706 G1 F2810 G1 X5.734 Y-13.124 E.04172 G1 X5.592 Y-13.295 E.00659 G1 X5.55 Y-13.483 E.00573 G1 X5.508 Y-13.295 E.00573 G1 X5.366 Y-13.124 E.00659 G1 X5.366 Y-11.716 E.04172 G1 X5.694 Y-11.716 E.0097 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F2810 G1 X6.106 Y-13.327 E.06093 G1 X5.92 Y-13.45 E.00684 G1 X5.902 Y-14.114 E.02041 G1 X5.198 Y-14.114 E.02165 G1 X5.198 Y-13.531 E.01793 G1 X5.146 Y-13.401 E.00428 G1 X4.994 Y-13.327 E.00519 G1 X4.994 Y-11.344 E.06093 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.294 Y-14.029 F30000 ;TYPE:Gap infill ;WIDTH:0.589882 G1 F2810 G1 X7.794 Y-14.029 E.06686 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.294 Y-14.029 ;WIPE_END G1 X5.41 Y-6.448 Z79 F30000 G1 X3.498 Y9.952 Z79 G1 Z78.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2810 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2810 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2810 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z79 F30000 G1 X3.498 Y40.648 Z79 G1 Z78.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2810 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2810 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2810 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z79 F30000 G1 X33.195 Y40.745 Z79 G1 Z78.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2810 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2810 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2810 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:78.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;78.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;78.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z79.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z79.2 G1 Z78.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2894 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2894 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 M73 P83 R17 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z79.2 F30000 G1 X4.602 Y-10.992 Z79.2 G1 Z78.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2894 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-14.714 E.03855 G1 X7.998 Y-14.714 E.16241 G1 X7.998 Y-13.552 E.03855 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2894 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-15.121 E.06555 G1 F2400 G1 X3.158 Y-15.121 E.01536 G1 X7.942 Y-15.121 E.15869 G1 X8.405 Y-15.121 E.01536 G1 F2894 G1 X8.405 Y-13.145 E.06555 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2894 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-14.718 E.04234 G1 F2400 G1 X2.26 Y-15.556 E.02575 G1 X8.84 Y-15.556 E.20219 M106 S255 G1 X8.84 Y-14.718 E.02575 G1 F2894 G1 X8.84 Y-13.34 E.04234 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2894 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z79.2 F30000 G1 Z78.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.420101 G1 F2894 G1 X6.106 Y-13.758 E.0742 G1 X6.294 Y-13.944 E.00814 G1 X7.606 Y-13.944 E.04031 G1 X7.606 Y-14.322 E.0116 G1 X3.494 Y-14.322 E.12637 G1 X3.494 Y-13.944 E.0116 G1 X4.806 Y-13.944 E.04031 G1 X4.994 Y-13.756 E.0082 G1 X4.994 Y-11.344 E.07412 G1 X6.066 Y-11.344 E.03294 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410238 G1 F2894 G1 X5.734 Y-13.763 E.06127 G1 X5.892 Y-13.949 E.00732 G1 X5.178 Y-13.949 E.02139 G1 X5.366 Y-13.756 E.0081 G1 X5.366 Y-11.716 E.06104 G1 X5.694 Y-11.716 E.0098 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.366 Y-11.716 G1 X5.366 Y-13.389 ;WIPE_END G1 X4.757 Y-5.781 Z79.2 F30000 G1 X3.498 Y9.952 Z79.2 G1 Z78.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2894 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2894 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2894 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z79.2 F30000 G1 X3.498 Y40.648 Z79.2 G1 Z78.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2894 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2894 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2894 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z79.2 F30000 G1 X33.195 Y40.745 Z79.2 G1 Z78.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2894 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2894 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2894 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:79 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;79 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;79 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z79.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z79.4 G1 Z79 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2932 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2932 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z79.4 F30000 G1 X4.602 Y-10.992 Z79.4 G1 Z79 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2932 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-14.921 E.04541 G1 X7.998 Y-14.921 E.16241 G1 X7.998 Y-13.552 E.04541 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2932 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-13.4 E.00846 G1 X2.695 Y-14.866 E.04863 G1 X2.695 Y-15.328 E.01533 G1 F2280 G1 X3.158 Y-15.328 E.01536 G1 X7.942 Y-15.328 E.15869 G1 X8.405 Y-15.328 E.01536 G1 F2932 G1 X8.405 Y-14.866 E.01533 G1 X8.405 Y-13.4 E.04863 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2932 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-14.926 E.04873 G1 F2280 G1 X2.26 Y-15.763 E.02572 G1 X8.84 Y-15.763 E.20219 M106 S255 G1 X8.84 Y-14.926 E.02572 G1 F2932 G1 X8.84 Y-13.34 E.04873 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2932 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z79.4 F30000 G1 Z79 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F2932 G1 X6.106 Y-13.756 E.0741 ;WIDTH:0.437333 G1 X6.155 Y-13.836 E.00302 ;WIDTH:0.472001 G1 X6.204 Y-13.916 E.00329 ;WIDTH:0.523483 G1 X6.254 Y-13.996 E.00369 G1 X7.554 Y-13.996 E.05092 G1 X7.554 Y-14.477 E.01884 G1 X6.294 Y-14.477 E.04932 ;WIDTH:0.506669 G1 X6.046 Y-14.495 E.0094 ;WIDTH:0.472001 G1 X5.798 Y-14.512 E.0087 ;WIDTH:0.437333 G1 X5.55 Y-14.529 E.00799 G1 X5.302 Y-14.512 E.00799 ;WIDTH:0.472001 G1 X5.054 Y-14.495 E.0087 ;WIDTH:0.522676 G1 X4.806 Y-14.477 E.00972 G1 X3.546 Y-14.477 E.04924 G1 X3.546 Y-13.996 E.01881 G1 X4.806 Y-13.996 E.04924 ;WIDTH:0.506669 G1 X4.868 Y-13.916 E.00385 ;WIDTH:0.472001 G1 X4.931 Y-13.836 E.00356 ;WIDTH:0.420985 G1 X4.994 Y-13.756 E.00314 G1 X4.994 Y-11.344 E.07429 G1 X6.066 Y-11.344 E.03302 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.416871 G1 F2932 G1 X5.74 Y-13.9 E.06653 G1 X6.005 Y-14.145 E.01102 G1 X5.043 Y-14.145 E.02931 G1 X5.366 Y-13.895 E.01244 G1 X5.366 Y-11.716 E.06638 G1 X5.694 Y-11.716 E.00997 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.366 Y-11.716 G1 X5.366 Y-13.389 ;WIPE_END G1 X4.757 Y-5.781 Z79.4 F30000 G1 X3.498 Y9.952 Z79.4 G1 Z79 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2932 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2932 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2932 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z79.4 F30000 G1 X3.498 Y40.648 Z79.4 G1 Z79 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2932 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2932 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2932 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z79.4 F30000 G1 X33.195 Y40.745 Z79.4 G1 Z79 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2932 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2932 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2932 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:79.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;79.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;79.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z79.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z79.6 G1 Z79.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z79.6 F30000 G1 X4.602 Y-10.992 Z79.6 G1 Z79.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.129 E.05231 G1 X7.998 Y-15.129 E.16241 G1 X7.998 Y-13.552 E.05231 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3009 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-13.4 E.00846 G1 X2.695 Y-15.073 E.0555 G1 F2760 G1 X2.695 Y-15.536 E.01536 G1 F2160 G1 X3.158 Y-15.536 E.01536 G1 X7.942 Y-15.536 E.15869 G1 X8.405 Y-15.536 E.01536 G1 F2760 G1 X8.405 Y-15.073 E.01536 G1 F3009 G1 X8.405 Y-13.4 E.0555 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-15.133 E.05509 G1 F2160 G1 X2.26 Y-15.971 E.02575 G1 X8.84 Y-15.971 E.20219 M106 S255 G1 X8.84 Y-15.133 E.02575 G1 F3009 G1 X8.84 Y-13.34 E.05509 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F3009 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z79.6 F30000 G1 Z79.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3009 G1 X6.106 Y-13.756 E.0741 G1 X6.124 Y-13.835 E.00251 G1 X6.294 Y-13.944 E.00622 G1 X7.606 Y-13.944 E.0403 G1 X7.606 Y-14.737 E.02436 G1 X3.494 Y-14.737 E.12634 G1 X3.494 Y-13.944 E.02436 G1 X4.806 Y-13.944 E.0403 G1 X4.994 Y-13.824 E.00687 G1 X4.994 Y-11.344 E.0762 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F3009 G1 X5.734 Y-13.756 E.06104 ;WIDTH:0.429559 G1 X5.743 Y-13.883 E.00401 ;WIDTH:0.475308 G1 X5.751 Y-14.009 E.00448 G1 X6.193 Y-14.336 E.01934 G3 X4.806 Y-14.34 I-.631 J-19.688 E.04888 ;WIDTH:0.419934 G1 X5.366 Y-13.999 E.02018 G1 X5.366 Y-11.716 E.07012 G1 X5.694 Y-11.716 E.01006 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.193 Y-14.336 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.467388 G1 F3009 G1 X7.17 Y-14.34 E.03379 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.891 Y-14.34 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.458524 G1 F3009 G1 X4.766 Y-14.34 E.02964 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.891 Y-14.34 ;WIPE_END G1 X3.767 Y-6.709 Z79.6 F30000 G1 X3.498 Y9.952 Z79.6 G1 Z79.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3009 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z79.6 F30000 G1 X3.498 Y40.648 Z79.6 G1 Z79.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3009 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z79.6 F30000 G1 X33.195 Y40.745 Z79.6 G1 Z79.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3009 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3009 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3009 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:79.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;79.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;79.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z79.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z79.8 G1 Z79.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3076 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3076 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z79.8 F30000 G1 X4.602 Y-10.992 Z79.8 G1 Z79.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3076 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.337 E.05921 G1 X7.998 Y-15.337 E.16241 G1 X7.998 Y-13.552 E.05921 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3076 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-13.4 E.00846 G1 X2.695 Y-15.281 E.0624 G1 F2340 G1 X2.695 Y-15.744 E.01536 G1 F2040 G1 X3.158 Y-15.744 E.01536 G1 X7.942 Y-15.744 E.15869 G1 X8.405 Y-15.744 E.01536 G1 F2340 G1 X8.405 Y-15.281 E.01536 G1 F3076 G1 X8.405 Y-13.4 E.0624 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3076 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-15.341 E.06149 G1 F2040 G1 X2.26 Y-16.179 E.02575 G1 X8.84 Y-16.179 E.20219 M106 S255 G1 X8.84 Y-15.341 E.02575 G1 F3076 G1 X8.84 Y-13.34 E.06149 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F3076 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X6.106 Y-11.344 Z79.8 F30000 G1 Z79.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F3076 G1 X6.106 Y-13.756 E.0741 G1 X6.137 Y-13.859 E.00331 G1 X6.294 Y-13.944 E.00551 G1 X7.606 Y-13.944 E.0403 G1 X7.606 Y-14.944 E.03074 G1 X3.494 Y-14.944 E.12634 G1 X3.494 Y-13.944 E.03074 G1 X4.806 Y-13.944 E.0403 G1 X4.994 Y-13.808 E.00715 G1 X4.994 Y-11.344 E.07569 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.734 Y-11.716 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.410223 G1 F3076 G1 X5.734 Y-13.756 E.06104 ;WIDTH:0.434465 G1 X5.744 Y-13.871 E.00371 ;WIDTH:0.482947 G1 X5.754 Y-13.987 E.00416 ;WIDTH:0.531429 G1 X5.764 Y-14.103 E.00462 ;WIDTH:0.531179 G1 X5.874 Y-14.148 E.00471 ;WIDTH:0.482197 G1 X5.983 Y-14.193 E.00423 ;WIDTH:0.433215 G1 X6.093 Y-14.238 E.00376 M73 P84 R17 ;WIDTH:0.384233 G1 X6.202 Y-14.283 E.00329 ;WIDTH:0.355533 G3 X7.262 Y-14.289 I.982 J87.961 E.02699 G1 X7.262 Y-14.6 E.00794 G1 X6.294 Y-14.6 E.02464 ;WIDTH:0.374639 G1 X6.146 Y-14.58 E.00406 ;WIDTH:0.414868 G1 X5.997 Y-14.56 E.00455 ;WIDTH:0.455097 G1 X5.848 Y-14.54 E.00505 ;WIDTH:0.495327 G1 X5.699 Y-14.52 E.00554 ;WIDTH:0.535556 G1 X5.55 Y-14.5 E.00603 G1 X5.401 Y-14.52 E.00603 ;WIDTH:0.495327 G1 X5.252 Y-14.54 E.00554 ;WIDTH:0.455097 G1 X5.103 Y-14.56 E.00505 ;WIDTH:0.414868 G1 X4.954 Y-14.58 E.00455 ;WIDTH:0.355786 G1 X4.806 Y-14.6 E.00383 G1 X3.839 Y-14.6 E.02466 G1 X3.839 Y-14.289 E.00794 G1 X4.806 Y-14.289 E.02466 ;WIDTH:0.374639 G1 X4.912 Y-14.251 E.00304 ;WIDTH:0.414868 G1 X5.018 Y-14.214 E.0034 ;WIDTH:0.455097 G1 X5.124 Y-14.177 E.00377 ;WIDTH:0.495327 G1 X5.23 Y-14.14 E.00414 ;WIDTH:0.535556 G1 X5.336 Y-14.103 E.00451 ;WIDTH:0.531429 G1 X5.346 Y-13.987 E.00462 ;WIDTH:0.482947 G1 X5.356 Y-13.871 E.00416 ;WIDTH:0.412491 G1 X5.366 Y-11.716 E.0649 G1 X5.694 Y-11.716 E.00986 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.366 Y-11.716 G1 X5.358 Y-13.389 ;WIPE_END G1 X4.752 Y-5.781 Z79.8 F30000 G1 X3.498 Y9.952 Z79.8 G1 Z79.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3076 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3076 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3076 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z79.8 F30000 G1 X3.498 Y40.648 Z79.8 G1 Z79.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3076 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3076 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3076 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z79.8 F30000 G1 X33.195 Y40.745 Z79.8 G1 Z79.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3076 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3076 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3076 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:79.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;79.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;79.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z80 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z80 G1 Z79.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3080 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3080 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z80 F30000 G1 X4.602 Y-10.992 Z80 G1 Z79.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3080 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.544 E.06608 G1 F3000 G1 X7.998 Y-15.544 E.16241 G1 F3080 G1 X7.998 Y-13.552 E.06608 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3080 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-13.4 E.00846 G1 X2.695 Y-15.489 E.0693 G1 F2220 G1 X2.695 Y-15.951 E.01533 G1 F1920 G1 X3.158 Y-15.951 E.01536 G1 X7.942 Y-15.951 E.15869 G1 X8.405 Y-15.951 E.01536 G1 F2220 G1 X8.405 Y-15.489 E.01533 G1 F3080 G1 X8.405 Y-13.4 E.0693 G1 X8.405 Y-13.145 E.00846 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3080 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-15.549 E.06788 G1 F1920 G1 X2.26 Y-16.386 E.02572 G1 X8.84 Y-16.386 E.20219 M106 S255 G1 X8.84 Y-15.549 E.02572 G1 F3080 G1 X8.84 Y-13.34 E.06788 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F3080 G1 X4.05 Y-6.328 E.04726 G1 X4.651 Y-12.279 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.495415 G1 F3080 G1 X7.867 Y-15.495 E.16768 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.589 Y-13.961 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.452894 G1 F3080 G1 X7.589 Y-14.66 E.02338 G1 X6.89 Y-13.961 E.03307 G1 X7.549 Y-13.961 E.02204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.74 Y-11.71 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.397998 G1 F3080 G1 X5.74 Y-12.316 E.01754 G1 X5.36 Y-11.937 E.01553 G1 X5.36 Y-11.71 E.00656 G1 X5.7 Y-11.71 E.00982 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-11.344 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3080 G1 X6.106 Y-13.2 E.05703 G1 X4.994 Y-12.088 E.04831 G1 X4.994 Y-11.344 E.02287 G1 X6.066 Y-11.344 E.03293 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.994 Y-13.155 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3080 G1 X6.991 Y-15.152 E.08678 G1 X3.494 Y-15.152 E.10745 G1 X3.494 Y-13.944 E.03711 G1 X4.806 Y-13.944 E.0403 G1 X4.917 Y-13.907 E.00362 G1 X4.994 Y-13.756 E.00523 G1 X4.994 Y-13.195 E.01723 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.279 Y-14.061 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.54391 G1 F3080 G1 X5.931 Y-14.713 E.03766 G1 X5.326 Y-14.713 E.02469 ;WIDTH:0.522514 G1 X5.066 Y-14.734 E.01021 ;WIDTH:0.460553 G1 X4.806 Y-14.756 E.00889 G1 X3.89 Y-14.756 E.03115 G1 X3.89 Y-14.34 E.01414 G1 X4.806 Y-14.34 E.03115 ;WIDTH:0.47972 G1 X4.992 Y-14.301 E.00677 ;WIDTH:0.522161 G1 X5.178 Y-14.261 E.00743 G1 X5.261 Y-14.096 E.00719 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X5.178 Y-14.261 G1 X4.992 Y-14.301 ;WIPE_END G1 X4.523 Y-6.683 Z80 F30000 G1 X3.498 Y9.952 Z80 G1 Z79.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3080 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3080 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3080 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z80 F30000 G1 X3.498 Y40.648 Z80 G1 Z79.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3080 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3080 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3080 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z80 F30000 G1 X33.195 Y40.745 Z80 G1 Z79.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3080 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3080 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3080 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:79.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;79.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;79.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z80.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z80.2 G1 Z79.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3204 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3204 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z80.2 F30000 G1 X4.602 Y-10.992 Z80.2 G1 Z79.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3204 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06953 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3204 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 F1980 G1 X8.405 Y-16.055 E.18941 G1 F3204 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3204 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-13.34 E.01936 G1 X2.26 Y-15.756 E.07424 G1 F1860 G1 X2.26 Y-16.49 E.02255 G1 F1620 G1 X2.994 Y-16.49 E.02255 G1 X8.106 Y-16.49 E.15708 G1 X8.84 Y-16.49 E.02255 M106 S255 G1 F1860 G1 X8.84 Y-15.756 E.02255 G1 F3204 G1 X8.84 Y-13.34 E.07424 G1 X8.84 Y-12.71 E.01936 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F3204 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X4.946 Y-11.312 Z80.2 F30000 G1 Z79.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F3204 G1 X4.883 Y-11.275 E.00204 G1 X4.948 Y-11.24 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.106 Y-13.196 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3204 G1 X6.106 Y-13.756 E.01719 G1 X6.193 Y-13.915 E.00557 G1 X6.294 Y-13.944 E.00324 G1 X7.606 Y-13.944 E.0403 G1 X7.606 Y-15.256 E.0403 G1 X4.046 Y-15.256 E.10938 G1 X6.078 Y-13.224 E.08827 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3204 G1 X7.184 Y-14.834 E.01779 G1 X6.294 Y-14.834 E.03386 ;WIDTH:0.528131 G1 X5.723 Y-14.816 E.0226 ;WIDTH:0.576064 G1 X5.152 Y-14.798 E.02483 G1 X5.841 Y-14.108 E.04236 G1 X5.947 Y-14.301 E.00955 ;WIDTH:0.563949 G1 X6.121 Y-14.334 E.0075 ;WIDTH:0.516389 G1 X6.294 Y-14.366 E.00682 G1 X7.144 Y-14.366 E.03277 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.437 Y-13.902 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3204 G1 X3.373 Y-13.865 E.00204 G1 X3.438 Y-13.831 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.19 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.435085 G1 F3204 G1 X6.302 Y-12.509 E.14064 G1 X6.302 Y-11.955 E.01772 G1 X3.298 Y-14.959 E.13575 G1 X3.298 Y-14.404 E.01772 G1 X4.124 Y-13.578 E.03731 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.628 Y-13.074 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3204 G1 X6.302 Y-11.4 E.07563 G1 X6.302 Y-11.148 E.00806 G1 X5.999 Y-11.148 E.00966 G1 X4.798 Y-12.349 E.05429 G1 X4.798 Y-11.795 E.01772 G1 X5.615 Y-10.978 E.0369 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.798 Y-11.795 G1 X4.798 Y-12.349 G1 X5.004 Y-12.144 ;WIPE_END G1 X4.485 Y-4.529 Z80.2 F30000 G1 X3.498 Y9.952 Z80.2 G1 Z79.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3204 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3204 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3204 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z80.2 F30000 G1 X3.498 Y40.648 Z80.2 G1 Z79.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3204 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3204 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3204 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z80.2 F30000 G1 X33.195 Y40.745 Z80.2 G1 Z79.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3204 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3204 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3204 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:80 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;80 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;80 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z80.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z80.4 G1 Z80 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z80.4 F30000 G1 X4.602 Y-10.992 Z80.4 G1 Z80 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06953 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2842 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 F2220 G1 X8.405 Y-16.055 E.18941 G1 F2842 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-16.49 E.11615 G1 F1680 G1 X8.84 Y-16.49 E.20219 G1 F2842 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2842 G1 X4.05 Y-6.328 E.04726 G1 X3.697 Y-15.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2842 G1 X3.313 Y-15.437 E.01275 G1 X3.313 Y-14.193 E.04126 G3 X3.871 Y-13.763 I-3.535 J5.166 E.02337 G1 X4.813 Y-13.763 E.03125 G1 X4.813 Y-13.241 E.01733 G1 X4.997 Y-13.19 E.00632 G1 X5.652 Y-13.291 E.02199 G2 X6.962 Y-14.321 I-9.068 J-12.889 E.05531 G1 X7.617 Y-14.503 E.02256 G1 X7.787 Y-14.477 E.00569 G1 X7.787 Y-15.437 E.03185 G1 X7.119 Y-15.437 E.02216 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X7.787 Y-15.437 G1 X7.787 Y-14.477 G1 X7.617 Y-14.503 G1 X7.425 Y-14.449 ;WIPE_END G1 X6.212 Y-6.914 Z80.4 F30000 G1 X3.498 Y9.952 Z80.4 G1 Z80 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F2842 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2842 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z80.4 F30000 G1 X3.498 Y40.648 Z80.4 G1 Z80 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2842 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z80.4 F30000 G1 X33.195 Y40.745 Z80.4 G1 Z80 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2842 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2842 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2842 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:80.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;80.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;80.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z80.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z80.6 G1 Z80.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2889 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2889 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z80.6 F30000 G1 X4.602 Y-10.992 Z80.6 G1 Z80.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2889 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06953 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2889 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2889 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-16.49 E.11615 G1 F2040 G1 X8.84 Y-16.49 E.20219 G1 F2889 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2889 G1 X4.05 Y-6.328 E.04726 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y-8.328 ;WIPE_END G1 X4.813 Y-11.643 Z80.6 F30000 G1 Z80.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2889 G1 X4.813 Y-11.163 E.01592 G1 X5.962 Y-11.163 E.0381 G1 X6.287 Y-11.491 E.01532 G1 X6.287 Y-13.119 E.05401 G1 X7.067 Y-15.437 F30000 G1 F2889 G1 X7.787 Y-15.437 E.02387 G1 X7.787 Y-14.528 E.03015 G1 X7.617 Y-14.524 E.00563 G2 X6.508 Y-13.763 I.465 J1.868 E.04559 G1 X6.287 Y-13.763 E.00732 G1 X6.287 Y-13.544 E.00727 G3 X4.997 Y-13.169 I-.954 J-.874 E.04687 G1 X4.813 Y-13.254 E.0067 G1 X4.813 Y-13.763 E.0169 G1 X4.052 Y-13.763 E.02525 G2 X3.313 Y-14.428 I-3.116 J2.72 E.03305 G1 X3.313 Y-15.437 E.03347 G1 X3.932 Y-15.437 E.02054 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X3.313 Y-15.437 G1 X3.313 Y-14.428 G1 X3.589 Y-14.179 ;WIPE_END G1 X3.56 Y-6.547 Z80.6 F30000 G1 X3.498 Y9.952 Z80.6 G1 Z80.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F2889 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2889 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2889 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z80.6 F30000 G1 X3.498 Y40.648 Z80.6 G1 Z80.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2889 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2889 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 M73 P84 R16 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2889 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z80.6 F30000 G1 X33.195 Y40.745 Z80.6 G1 Z80.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2889 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2889 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2889 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:80.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;80.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;80.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z80.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z80.8 G1 Z80.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2835 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2835 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.206 Z80.8 F30000 G1 X4.602 Y-10.992 Z80.8 G1 Z80.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2835 G1 X4.602 Y-13.552 E.08492 G1 X3.102 Y-13.552 E.04976 G1 X3.102 Y-15.648 E.06953 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.602 Y-10.952 E.06289 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.195 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2835 G1 X4.195 Y-13.145 E.08625 G1 X2.695 Y-13.145 E.04976 G1 X2.695 Y-16.055 E.09653 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X4.235 Y-10.545 E.08857 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2835 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X3.76 Y-6.11 E.01782 G1 X3.76 Y-6.74 E.01936 G1 X3.76 Y-12.167 E.16676 G1 X3.76 Y-12.71 E.01668 G1 X2.26 Y-12.71 E.04609 G1 X2.26 Y-16.49 E.11615 G1 F2400 G1 X8.84 Y-16.49 E.20219 G1 F2835 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y-10.327 F30000 ;TYPE:Gap infill ;WIDTH:0.18792 G1 F2835 G1 X4.05 Y-6.328 E.04726 G1 X4.813 Y-11.78 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F2835 G1 X4.813 Y-11.163 E.02046 G1 X5.825 Y-11.163 E.03355 G1 X6.287 Y-11.77 E.02531 G1 X6.287 Y-13.057 E.04269 G1 X6.986 Y-15.437 F30000 G1 F2835 G1 X7.787 Y-15.437 E.02657 G1 X7.787 Y-14.61 E.02744 G1 X7.617 Y-14.571 E.00577 G1 X6.962 Y-14.136 E.0261 G1 X6.678 Y-13.763 E.01553 G1 X6.287 Y-13.763 E.01298 G1 X6.287 Y-13.26 E.01668 G3 X5.652 Y-12.973 I-.579 J-.435 E.02412 G1 X4.997 Y-13.121 E.02228 G1 X4.813 Y-13.243 E.00731 G1 X4.813 Y-13.763 E.01724 G1 X4.184 Y-13.763 E.02085 G2 X3.313 Y-14.676 I-1.905 J.946 E.04249 G1 X3.313 Y-15.437 E.02525 G1 X4.18 Y-15.437 E.02877 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X3.313 Y-15.437 G1 X3.313 Y-14.676 G1 X3.619 Y-14.464 ;WIPE_END G1 X3.581 Y-6.832 Z80.8 F30000 G1 X3.498 Y9.952 Z80.8 G1 Z80.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F2835 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2835 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2835 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z80.8 F30000 G1 X3.498 Y40.648 Z80.8 G1 Z80.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2835 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2835 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2835 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z80.8 F30000 G1 X33.195 Y40.745 Z80.8 G1 Z80.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2835 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2835 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2835 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:80.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;80.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;80.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z81 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z81 G1 Z80.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5465 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5465 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z81 F30000 G1 X3.498 Y-10.952 Z81 G1 Z80.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F1860 G1 X3.498 Y-10 E.03158 G1 X3.498 Y-7.904 E.06953 G1 X3.498 Y-6.952 E.03158 G1 F600 G1 X3.35 Y-6.952 E.00491 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y-6.952 E.00823 G1 X3.102 Y-8.3 E.04472 G1 X3.102 Y-11.2 E.0962 G1 X3.102 Y-12.3 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.102 Y-12.5 E.00663 M106 S255 G1 F2400 G1 X3.102 Y-13.4 E.02985 G1 F5465 G1 X3.102 Y-15.648 E.07457 G1 X7.998 Y-15.648 E.16241 G1 X7.998 Y-13.552 E.06953 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X4.45 Y-10.952 E.06794 G1 F2280 G1 X3.538 Y-10.952 E.03025 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5465 M106 S255 G1 X3.905 Y-10 E.01808 G1 X3.905 Y-7.09 E.09653 G1 X3.905 Y-6.545 E.01808 G1 F2400 G1 X3.55 Y-6.545 E.01178 G1 F600 G1 X3.35 Y-6.545 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y-6.545 E.02173 G1 X2.695 Y-7.89 E.04462 G1 X2.695 Y-11.2 E.1098 G1 X2.695 Y-12.3 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X2.695 Y-12.5 E.00663 M106 S255 G1 F2400 G1 X2.695 Y-13.4 E.02985 G1 F5465 G1 X2.695 Y-15.8 E.07961 G1 X2.695 Y-16.055 E.00846 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X6.65 Y-10.545 E.00846 G1 X4.45 Y-10.545 E.07298 G1 X3.945 Y-10.545 E.01675 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5465 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 F2400 G1 X3.55 Y-6.11 E.02427 G1 F2280 G1 X2.26 Y-6.11 E.03964 G1 F600 G1 X2.26 Y-6.3 E.00584 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y-7.4 E.03649 G1 X2.26 Y-11.2 E.12605 G1 X2.26 Y-12.3 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X2.26 Y-12.5 E.00615 M106 S255 G1 F2400 G1 X2.26 Y-13.34 E.02581 G1 F5465 G1 X2.26 Y-15.86 E.07743 G1 X2.26 Y-16.49 E.01936 G1 F5100 G1 X8.84 Y-16.49 E.20219 G1 F5465 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X4.874 Y-11.357 Z81 F30000 G1 Z80.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F5465 G1 X4.811 Y-11.32 E.00204 G1 X4.876 Y-11.285 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.524 Y-13.62 F30000 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 G1 F1500 G1 X3.524 Y-11.148 E.07595 G1 X3.901 Y-11.148 E.01159 G1 X3.901 Y-13.45 E.07074 G1 X4.278 Y-13.45 E.01159 G1 X4.278 Y-10.978 E.07595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.481 Y-13.83 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F5465 M106 S255 G1 X3.418 Y-13.793 E.00204 G1 X3.483 Y-13.759 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.226 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.435085 G1 F5465 G1 X6.302 Y-12.546 E.13899 G1 X6.302 Y-11.992 E.01772 G1 X3.298 Y-14.995 E.13575 G1 X3.298 Y-14.441 E.01772 G1 X4.081 Y-13.658 E.03539 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.708 Y-13.031 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F5465 G1 X6.302 Y-11.437 E.07205 G1 X6.302 Y-11.148 E.00923 G1 X6.036 Y-11.148 E.00849 G1 X4.877 Y-12.307 E.05237 G1 X4.877 Y-11.752 E.01772 G1 X5.651 Y-10.978 E.03497 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F5465 G1 X7.606 Y-15.256 E.0403 G1 X4.083 Y-15.256 E.10825 G1 X6.106 Y-13.233 E.08791 G1 X6.106 Y-13.756 E.01606 G1 X6.197 Y-13.917 E.0057 G3 X7.566 Y-13.944 I1.061 J18.987 E.04208 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F5465 G1 X7.184 Y-14.834 E.01779 G1 X6.294 Y-14.834 E.03386 ;WIDTH:0.526586 G1 X5.738 Y-14.817 E.02195 ;WIDTH:0.570395 G1 X5.181 Y-14.801 E.02394 G1 X5.859 Y-14.123 E.04118 G1 X5.962 Y-14.306 E.00903 ;WIDTH:0.559314 G1 X6.128 Y-14.336 E.00711 ;WIDTH:0.515652 G1 X6.294 Y-14.366 E.00651 G1 X7.144 Y-14.366 E.03272 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.294 Y-14.366 G1 X6.128 Y-14.336 ;WIPE_END G1 X5.306 Y-6.748 Z81 F30000 G1 X3.498 Y9.952 Z81 G1 Z80.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5465 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5465 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5465 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z81 F30000 G1 X3.498 Y40.648 Z81 G1 Z80.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5465 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5465 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5465 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z81 F30000 G1 X33.195 Y40.745 Z81 G1 Z80.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5465 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5465 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5465 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:80.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;80.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;80.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z81.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z81.2 G1 Z80.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3349 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3349 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z81.2 F30000 G1 X3.498 Y-10.952 Z81.2 G1 Z80.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3349 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3349 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3349 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z81.2 F30000 G1 Z80.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3349 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3349 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3349 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3349 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3349 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G1 X3.462 Y-7.729 Z81.2 F30000 G1 X3.498 Y9.952 Z81.2 G1 Z80.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3349 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3349 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3349 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z81.2 F30000 G1 X3.498 Y40.31 Z81.2 G1 Z80.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3349 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3349 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3349 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z81.2 F30000 G1 X33.195 Y40.745 Z81.2 G1 Z80.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3349 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3349 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3349 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:81 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;81 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;81 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z81.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z81.4 G1 Z81 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z81.4 F30000 G1 X3.498 Y-10.952 Z81.4 G1 Z81 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3335 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-13.244 Z81.4 F30000 G1 Z81 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3335 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3335 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3335 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G1 X5.647 Y-7.26 Z81.4 F30000 G1 X3.498 Y9.952 Z81.4 G1 Z81 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3335 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z81.4 F30000 G1 X3.498 Y40.31 Z81.4 G1 Z81 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3335 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 M73 P85 R16 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z81.4 F30000 G1 X33.195 Y40.745 Z81.4 G1 Z81 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3335 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3335 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3335 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:81.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;81.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;81.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z81.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z81.6 G1 Z81.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z81.6 F30000 G1 X3.498 Y-10.952 Z81.6 G1 Z81.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z81.6 F30000 G1 Z81.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3325 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3325 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3325 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G1 X3.462 Y-7.729 Z81.6 F30000 G1 X3.498 Y9.952 Z81.6 G1 Z81.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z81.6 F30000 G1 X3.498 Y40.31 Z81.6 G1 Z81.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z81.6 F30000 G1 X33.195 Y40.745 Z81.6 G1 Z81.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3325 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:81.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;81.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;81.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z81.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z81.8 G1 Z81.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z81.8 F30000 G1 X3.498 Y-10.952 Z81.8 G1 Z81.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-13.244 Z81.8 F30000 G1 Z81.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3323 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3323 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3323 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G1 X5.647 Y-7.26 Z81.8 F30000 G1 X3.498 Y9.952 Z81.8 G1 Z81.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z81.8 F30000 G1 X3.498 Y40.31 Z81.8 G1 Z81.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z81.8 F30000 G1 X33.195 Y40.745 Z81.8 G1 Z81.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3323 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:81.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;81.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;81.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z82 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z82 G1 Z81.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z82 F30000 G1 X3.498 Y-10.952 Z82 G1 Z81.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3387 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X7.563 Y-13.578 Z82 F30000 G1 Z81.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.44353 G1 F3387 G1 X7.972 Y-13.987 E.01887 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.554 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X6.996 Y-13.578 E.04503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.972 Y-14.554 ;WIPE_END G1 X6.472 Y-11.921 Z82 F30000 G1 Z81.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X5.659 Y-11.108 E.0375 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.093 Y-11.108 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X6.472 Y-12.487 E.06365 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.054 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X4.526 Y-11.108 E.08981 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.96 Y-11.108 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X7.972 Y-15.12 E.18521 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.906 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.393 Y-11.108 E.20835 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-11.41 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X7.34 Y-15.622 E.19442 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.773 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.128 Y-11.977 E.16827 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-12.543 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X6.207 Y-15.622 E.14211 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.64 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.128 Y-13.11 E.11596 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-13.676 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X5.074 Y-15.622 E.0898 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.507 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.128 Y-14.243 E.06365 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-14.81 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3387 G1 X3.94 Y-15.622 E.03749 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.128 Y-14.81 ;WIPE_END G1 X3.242 Y-7.178 Z82 F30000 G1 X3.498 Y9.952 Z82 G1 Z81.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3387 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z82 F30000 G1 X3.498 Y40.31 Z82 G1 Z81.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3387 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z82 F30000 G1 X33.195 Y40.745 Z82 G1 Z81.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3387 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3387 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3387 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:81.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;81.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;81.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z82.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z82.2 G1 Z81.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z82.2 F30000 G1 X3.498 Y-10.952 Z82.2 G1 Z81.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.019 E.16808 G1 X6.498 Y-12.019 E.11265 G1 X6.498 Y-10.952 E.0354 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.426 E.19509 G1 X6.905 Y-12.426 E.13965 G1 X6.905 Y-10.545 E.0624 G1 X3.945 Y-10.545 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.925 Y-8.545 ;WIPE_END G1 X3.102 Y-15.381 Z82.2 F30000 G1 Z81.8 M73 P85 R15 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.102 Y-15.648 E.00886 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-15.381 E.00886 G1 X3.142 Y-15.381 E.16108 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-14.974 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X2.695 Y-16.055 E.03587 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-14.974 E.03587 G1 X2.735 Y-14.974 E.18808 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y-16.055 G1 X3.613 Y-16.055 ;WIPE_END G1 X4.34 Y-10.11 Z82.2 F30000 G1 Z81.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.861 E.20745 G1 X8.76 Y-12.861 E.19973 G1 X8.76 Y-14.539 E.05155 G1 X2.26 Y-14.539 E.19973 G1 X2.26 Y-16.49 E.05996 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.129 Y-11.321 Z82.2 F30000 G1 Z81.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.372922 G1 F3163 G1 X6.129 Y-11.651 E.00887 G1 X3.471 Y-11.651 E.0715 G1 X3.471 Y-11.321 E.00887 G1 X6.089 Y-11.321 E.07042 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.089 Y-11.321 ;WIPE_END G1 X3.877 Y-3.691 Z82.2 F30000 G1 X3.498 Y9.952 Z82.2 G1 Z81.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z82.2 F30000 G1 X3.498 Y40.31 Z82.2 G1 Z81.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3163 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z82.2 F30000 G1 X33.195 Y40.745 Z82.2 G1 Z81.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3163 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3163 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3163 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:82 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;82 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;82 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z82.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z82.4 G1 Z82 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3085 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3085 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z82.4 F30000 G1 X3.498 Y-10.952 Z82.4 G1 Z82 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3085 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.802 E.16088 G1 X6.498 Y-11.802 E.11265 G1 X6.498 Y-10.952 E.02819 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3085 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.209 E.18788 G1 X6.905 Y-12.209 E.13965 G1 X6.905 Y-10.545 E.0552 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3085 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.644 E.20077 G1 X7.34 Y-12.644 E.15609 G1 X7.34 Y-10.11 E.07786 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.146 Y-14.737 Z82.4 F30000 G1 X8.405 Y-15.191 Z82.4 G1 Z82 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3085 G1 X2.695 Y-15.191 E.18941 G1 X2.695 Y-16.055 E.02866 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.231 E.02733 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.217 ;WIPE_END G1 X8.76 Y-12.71 Z82.4 F30000 G1 Z82 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3085 G1 X8.76 Y-14.756 E.06287 G1 X2.26 Y-14.756 E.19973 G1 X2.26 Y-16.49 E.05328 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.761 Y-14.71 ;WIPE_END G1 X6.294 Y-11.377 Z82.4 F30000 G1 Z82 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.485618 G1 F3085 G1 X3.306 Y-11.377 E.10782 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.377 ;WIPE_END G1 X2.899 Y-15.623 Z82.4 F30000 G1 Z82 G1 E.8 F1800 ;WIDTH:0.499774 G1 F3085 G1 X8.201 Y-15.623 E.19742 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.623 ;WIPE_END G1 X5.399 Y-8.033 Z82.4 F30000 G1 X3.498 Y9.952 Z82.4 G1 Z82 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3085 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3085 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3085 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z82.4 F30000 G1 X3.498 Y40.648 Z82.4 G1 Z82 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3085 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3085 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3085 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z82.4 F30000 G1 X33.195 Y40.745 Z82.4 G1 Z82 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3085 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3085 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3085 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:82.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;82.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;82.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z82.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z82.6 G1 Z82.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z82.6 F30000 G1 X3.498 Y-10.952 Z82.6 G1 Z82.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.671 E.15652 G1 X6.498 Y-11.671 E.11265 G1 X6.498 Y-10.952 E.02384 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3074 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.078 E.18353 G1 X6.905 Y-12.078 E.13965 G1 X6.905 Y-10.545 E.05084 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.513 E.19674 G1 X7.34 Y-12.513 E.15609 G1 X7.34 Y-10.11 E.07383 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.094 Y-14.767 Z82.6 F30000 G1 X8.405 Y-15.322 Z82.6 G1 Z82.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X2.695 Y-15.322 E.18941 G1 X2.695 Y-16.055 E.02431 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.362 E.02298 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.348 ;WIPE_END G1 X8.76 Y-12.71 Z82.6 F30000 G1 Z82.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X8.76 Y-14.887 E.0669 G1 X2.26 Y-14.887 E.19973 G1 X2.26 Y-16.49 E.04925 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.763 Y-14.71 ;WIPE_END G1 X6.294 Y-11.311 Z82.6 F30000 G1 Z82.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.354402 G1 F3074 G1 X3.306 Y-11.311 E.07586 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.311 ;WIPE_END G1 X2.899 Y-15.689 Z82.6 F30000 G1 Z82.2 G1 E.8 F1800 ;WIDTH:0.368556 G1 F3074 G1 X8.201 Y-15.689 E.14071 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.689 ;WIPE_END G1 X5.401 Y-8.098 Z82.6 F30000 G1 X3.498 Y9.952 Z82.6 G1 Z82.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3074 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z82.6 F30000 G1 X3.498 Y40.648 Z82.6 G1 Z82.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3074 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z82.6 F30000 G1 X33.195 Y40.745 Z82.6 G1 Z82.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3074 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:82.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;82.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;82.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z82.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z82.8 G1 Z82.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z82.8 F30000 G1 X3.498 Y-10.952 Z82.8 G1 Z82.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.591 E.15387 G1 X6.498 Y-11.591 E.11265 G1 X6.498 Y-10.952 E.02118 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3067 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.998 E.18088 G1 X6.905 Y-11.998 E.13965 G1 X6.905 Y-10.545 E.04819 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.433 E.19428 G1 X7.34 Y-12.433 E.15609 G1 X7.34 Y-10.11 E.07137 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.062 Y-14.784 Z82.8 F30000 G1 X8.405 Y-15.402 Z82.8 G1 Z82.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X2.695 Y-15.402 E.18941 G1 X2.695 Y-16.055 E.02165 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.442 E.02032 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.428 ;WIPE_END G1 X8.76 Y-12.71 Z82.8 F30000 G1 Z82.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X8.76 Y-14.967 E.06936 G1 X2.26 Y-14.967 E.19973 G1 X2.26 Y-16.49 E.04679 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.765 Y-14.71 ;WIPE_END G1 X6.294 Y-11.271 Z82.8 F30000 G1 Z82.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.27436 G1 F3067 G1 X3.306 Y-11.271 E.05637 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.271 ;WIPE_END G1 X2.899 Y-15.729 Z82.8 F30000 G1 Z82.4 G1 E.8 F1800 ;WIDTH:0.288514 G1 F3067 G1 X8.201 Y-15.729 E.10613 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.729 ;WIPE_END G1 X5.402 Y-8.138 Z82.8 F30000 G1 X3.498 Y9.952 Z82.8 G1 Z82.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3067 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z82.8 F30000 G1 X3.498 Y40.648 Z82.8 G1 Z82.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3067 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z82.8 F30000 G1 X33.195 Y40.745 Z82.8 G1 Z82.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3067 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:82.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;82.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;82.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z83 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z83 G1 Z82.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z83 F30000 G1 X3.498 Y-10.952 Z83 G1 Z82.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.554 E.15267 G1 X6.498 Y-11.554 E.11265 G1 X6.498 Y-10.952 E.01998 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3064 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.962 E.17968 G1 X6.905 Y-11.962 E.13965 G1 X6.905 Y-10.545 E.04699 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.397 E.19317 G1 X7.34 Y-12.397 E.15609 G1 X7.34 Y-10.11 E.07026 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.048 Y-14.792 Z83 F30000 G1 X8.405 Y-15.438 Z83 G1 Z82.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X2.695 Y-15.438 E.18941 G1 X2.695 Y-16.055 E.02045 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.478 E.01913 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.464 ;WIPE_END G1 X8.76 Y-12.71 Z83 F30000 G1 Z82.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X8.76 Y-15.003 E.07047 G1 X2.26 Y-15.003 E.19973 G1 X2.26 Y-16.49 E.04568 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.765 Y-14.71 ;WIPE_END G1 X6.294 Y-11.253 Z83 F30000 G1 Z82.6 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.238238 G1 F3064 G1 X3.306 Y-11.253 E.04757 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.253 ;WIPE_END G1 X2.899 Y-15.747 Z83 F30000 G1 Z82.6 G1 E.8 F1800 ;WIDTH:0.252394 G1 F3064 G1 X8.201 Y-15.747 E.09052 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.747 ;WIPE_END G1 X5.403 Y-8.156 Z83 F30000 G1 X3.498 Y9.952 Z83 G1 Z82.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3064 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z83 F30000 G1 X3.498 Y40.648 Z83 G1 Z82.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3064 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z83 F30000 G1 X33.195 Y40.745 Z83 G1 Z82.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 M73 P86 R15 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3064 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:82.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;82.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;82.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z83.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z83.2 G1 Z82.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z83.2 F30000 G1 X3.498 Y-10.952 Z83.2 G1 Z82.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.554 E.15267 G1 X6.498 Y-11.554 E.11265 G1 X6.498 Y-10.952 E.01998 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3064 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.962 E.17968 G1 X6.905 Y-11.962 E.13965 G1 X6.905 Y-10.545 E.04699 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.397 E.19317 G1 X7.34 Y-12.397 E.15609 G1 X7.34 Y-10.11 E.07026 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.048 Y-14.792 Z83.2 F30000 G1 X8.405 Y-15.438 Z83.2 G1 Z82.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X2.695 Y-15.438 E.18941 G1 X2.695 Y-16.055 E.02045 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.478 E.01913 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.464 ;WIPE_END G1 X8.76 Y-12.71 Z83.2 F30000 G1 Z82.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X8.76 Y-15.003 E.07047 G1 X2.26 Y-15.003 E.19973 G1 X2.26 Y-16.49 E.04568 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.765 Y-14.71 ;WIPE_END G1 X6.294 Y-11.253 Z83.2 F30000 G1 Z82.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.238238 G1 F3064 G1 X3.306 Y-11.253 E.04757 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.253 ;WIPE_END G1 X2.899 Y-15.747 Z83.2 F30000 G1 Z82.8 G1 E.8 F1800 ;WIDTH:0.252394 G1 F3064 G1 X8.201 Y-15.747 E.09052 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.747 ;WIPE_END G1 X5.403 Y-8.156 Z83.2 F30000 G1 X3.498 Y9.952 Z83.2 G1 Z82.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3064 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z83.2 F30000 G1 X3.498 Y40.648 Z83.2 G1 Z82.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3064 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z83.2 F30000 G1 X33.195 Y40.745 Z83.2 G1 Z82.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3064 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:83 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;83 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;83 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z83.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z83.4 G1 Z83 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z83.4 F30000 G1 X3.498 Y-10.952 Z83.4 G1 Z83 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.591 E.15387 G1 X6.498 Y-11.591 E.11265 G1 X6.498 Y-10.952 E.02118 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3067 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-11.998 E.18088 G1 X6.905 Y-11.998 E.13965 G1 X6.905 Y-10.545 E.04819 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.433 E.19428 G1 X7.34 Y-12.433 E.15609 G1 X7.34 Y-10.11 E.07137 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.062 Y-14.784 Z83.4 F30000 G1 X8.405 Y-15.402 Z83.4 G1 Z83 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X2.695 Y-15.402 E.18941 G1 X2.695 Y-16.055 E.02165 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.442 E.02032 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.428 ;WIPE_END G1 X8.76 Y-12.71 Z83.4 F30000 G1 Z83 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X8.76 Y-14.967 E.06936 G1 X2.26 Y-14.967 E.19973 G1 X2.26 Y-16.49 E.04679 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.765 Y-14.71 ;WIPE_END G1 X6.294 Y-11.271 Z83.4 F30000 G1 Z83 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.274364 G1 F3067 G1 X3.306 Y-11.271 E.05637 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.271 ;WIPE_END G1 X2.899 Y-15.729 Z83.4 F30000 G1 Z83 G1 E.8 F1800 ;WIDTH:0.288518 G1 F3067 G1 X8.201 Y-15.729 E.10613 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.729 ;WIPE_END G1 X5.402 Y-8.138 Z83.4 F30000 G1 X3.498 Y9.952 Z83.4 G1 Z83 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3067 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z83.4 F30000 G1 X3.498 Y40.648 Z83.4 G1 Z83 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3067 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z83.4 F30000 G1 X33.195 Y40.745 Z83.4 G1 Z83 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3067 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3067 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3067 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:83.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;83.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;83.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z83.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z83.6 G1 Z83.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z83.6 F30000 G1 X3.498 Y-10.952 Z83.6 G1 Z83.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.671 E.15652 G1 X6.498 Y-11.671 E.11265 G1 X6.498 Y-10.952 E.02384 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3074 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.078 E.18353 G1 X6.905 Y-12.078 E.13965 G1 X6.905 Y-10.545 E.05084 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-12.513 E.19674 G1 X7.34 Y-12.513 E.15609 G1 X7.34 Y-10.11 E.07383 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.094 Y-14.767 Z83.6 F30000 G1 X8.405 Y-15.322 Z83.6 G1 Z83.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X2.695 Y-15.322 E.18941 G1 X2.695 Y-16.055 E.02431 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.362 E.02298 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.348 ;WIPE_END G1 X8.76 Y-12.71 Z83.6 F30000 G1 Z83.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X8.76 Y-14.887 E.0669 G1 X2.26 Y-14.887 E.19973 G1 X2.26 Y-16.49 E.04925 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.763 Y-14.71 ;WIPE_END G1 X6.294 Y-11.311 Z83.6 F30000 G1 Z83.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.354402 G1 F3074 G1 X3.306 Y-11.311 E.07586 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.311 ;WIPE_END G1 X2.899 Y-15.689 Z83.6 F30000 G1 Z83.2 G1 E.8 F1800 ;WIDTH:0.368556 G1 F3074 G1 X8.201 Y-15.689 E.14071 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.689 ;WIPE_END G1 X5.401 Y-8.098 Z83.6 F30000 G1 X3.498 Y9.952 Z83.6 G1 Z83.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3074 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 M73 P86 R14 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z83.6 F30000 G1 X3.498 Y40.648 Z83.6 G1 Z83.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3074 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z83.6 F30000 G1 X33.195 Y40.745 Z83.6 G1 Z83.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3074 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3074 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3074 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:83.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;83.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;83.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z83.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z83.8 G1 Z83.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3107 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3107 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z83.8 F30000 G1 X3.498 Y-10.952 Z83.8 G1 Z83.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3107 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-11.802 E.16088 G1 X6.498 Y-11.802 E.11265 G1 X6.498 Y-10.952 E.02819 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3107 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.209 E.18788 G1 X6.905 Y-12.209 E.13965 G1 X6.905 Y-10.545 E.0552 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3107 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-11.883 E.15803 G1 X2.26 Y-12.644 E.02338 G1 X3.021 Y-12.644 E.02338 G1 X6.579 Y-12.644 E.10933 G1 X7.34 Y-12.644 E.02338 G1 X7.34 Y-11.883 E.02338 G1 X7.34 Y-10.74 E.03512 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X8.146 Y-14.737 Z83.8 F30000 G1 X8.405 Y-15.191 Z83.8 G1 Z83.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3107 G1 X2.695 Y-15.191 E.18941 G1 X2.695 Y-16.055 E.02866 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-15.231 E.02733 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X6.405 Y-15.217 ;WIPE_END G1 X8.76 Y-12.71 Z83.8 F30000 G1 Z83.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3107 G1 X8.76 Y-14.756 E.06287 G1 X8.144 Y-14.756 E.01893 G1 X3.021 Y-14.756 E.15742 G1 X2.26 Y-14.756 E.02338 G1 X2.26 Y-16.49 E.05328 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X8.8 Y-12.71 E.00123 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X8.761 Y-14.71 ;WIPE_END G1 X6.294 Y-11.377 Z83.8 F30000 G1 Z83.4 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.485624 G1 F3107 G1 X3.306 Y-11.377 E.10782 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X5.306 Y-11.377 ;WIPE_END G1 X2.899 Y-15.623 Z83.8 F30000 G1 Z83.4 G1 E.8 F1800 ;WIDTH:0.499782 G1 F3107 G1 X8.201 Y-15.623 E.19742 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.201 Y-15.623 ;WIPE_END G1 X5.399 Y-8.033 Z83.8 F30000 G1 X3.498 Y9.952 Z83.8 G1 Z83.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3107 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3107 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3107 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z83.8 F30000 G1 X3.498 Y40.648 Z83.8 G1 Z83.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3107 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3107 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3107 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z83.8 F30000 G1 X33.195 Y40.745 Z83.8 G1 Z83.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3107 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3107 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3107 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:83.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;83.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;83.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z84 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z84 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z84 F30000 G1 X3.498 Y-10.952 Z84 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-12.019 E.16808 G1 X6.498 Y-12.019 E.11265 G1 X6.498 Y-10.952 E.0354 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-12.426 E.19509 G1 X6.905 Y-12.426 E.13965 G1 X6.905 Y-10.545 E.0624 G1 X3.945 Y-10.545 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.925 Y-8.545 ;WIPE_END G17 G3 Z84 I1.208 J-.145 P1 F30000 G1 X3.102 Y-15.381 Z84 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.102 Y-15.648 E.00886 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-15.381 E.00886 G1 X3.142 Y-15.381 E.16108 SET_VELOCITY_LIMIT ACCEL=10000 G1 X2.695 Y-14.974 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X2.695 Y-16.055 E.03587 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-14.974 E.03587 G1 X2.735 Y-14.974 E.18808 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y-16.055 G1 X3.613 Y-16.055 ;WIPE_END G17 G3 Z84 I-1.208 J.148 P1 F30000 G1 X4.34 Y-10.11 Z84 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.014 E.16206 G1 F2340 G1 X2.26 Y-12.861 E.02603 G1 X8.55 Y-12.861 E.19327 M106 S255 G1 X8.76 Y-12.861 E.00645 G1 F3271 G1 X8.76 Y-14.539 E.05156 G1 F2400 G1 X8.55 Y-14.539 E.00645 G1 X2.26 Y-14.539 E.19327 M106 S255 G1 X2.26 Y-16.49 E.05995 G1 F3271 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.014 E.02139 G1 X7.34 Y-10.74 E.03915 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.129 Y-11.321 Z84 F30000 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.372922 G1 F3271 G1 X6.129 Y-11.651 E.00887 G1 X3.471 Y-11.651 E.0715 G1 X3.471 Y-11.321 E.00887 G1 X6.089 Y-11.321 E.07042 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.089 Y-11.321 ;WIPE_END G1 X3.877 Y-3.691 Z84 F30000 G1 X3.498 Y9.952 Z84 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z84 F30000 G1 X3.498 Y40.31 Z84 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3271 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z84 F30000 G1 X33.195 Y40.745 Z84 G1 Z83.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3271 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3271 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3271 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:83.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;83.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;83.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z84.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z84.2 G1 Z83.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z84.2 F30000 G1 X3.498 Y-10.952 Z84.2 G1 Z83.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01314 G1 X3.102 Y-12.171 E.17312 G1 F2400 G1 X3.102 Y-13.071 E.02985 G1 F600 G1 X3.102 Y-13.271 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y-14.129 E.02846 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.102 Y-14.329 E.00663 M106 S255 G1 F2400 G1 X3.102 Y-15.648 E.04375 G1 F6716 G1 X7.998 Y-15.648 E.16241 G1 F2400 G1 X7.998 Y-14.329 E.04375 G1 F600 G1 X7.998 Y-14.129 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X7.998 Y-13.552 E.01914 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-13.271 E.00932 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X6.498 Y-13.071 E.00663 M106 S255 G1 F2400 G1 X6.498 Y-12.171 E.02985 G1 F6716 G1 X6.498 Y-10.952 E.04044 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6716 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-6.8 E.00846 G1 X2.695 Y-12.171 E.17817 G1 F2400 G1 X2.695 Y-13.071 E.02985 G1 F600 G1 X2.695 Y-13.271 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y-14.129 E.02846 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X2.695 Y-14.329 E.00663 M106 S255 G1 F2400 G1 X2.695 Y-16.055 E.05725 G1 F6716 G1 X8.405 Y-16.055 E.18941 G1 F2400 G1 X8.405 Y-14.329 E.05725 G1 F1620 G1 X8.405 Y-13.145 E.03928 G1 X6.905 Y-13.145 E.04976 M106 S255 G1 X6.905 Y-12.171 E.03231 G1 F6716 G1 X6.905 Y-10.8 E.04548 G1 X6.905 Y-10.545 E.00846 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 X4.34 Y-6.11 E.01936 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-6.74 E.01936 G1 X2.26 Y-12.231 E.16872 G1 F2400 G1 X2.26 Y-13.071 E.02581 G1 F600 G1 X2.26 Y-13.271 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y-14.129 E.02846 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X2.26 Y-14.329 E.00615 M106 S255 G1 F2400 G1 X2.26 Y-15.169 E.02581 G1 F6716 G1 X2.26 Y-15.86 E.02123 G1 X2.26 Y-16.49 E.01936 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-12.167 E.01668 G1 X7.34 Y-10.74 E.04385 G1 X7.34 Y-10.11 E.01936 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G17 G3 Z84.2 I1.114 J.491 P1 F30000 G1 X7.672 Y-15.622 Z84.2 G1 Z83.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X7.672 Y-14.329 E.03973 G1 F600 G1 X7.672 Y-13.748 E.01785 G1 X7.295 Y-13.748 E.01158 G1 X7.295 Y-14.329 E.01785 G1 F1500 G1 X7.295 Y-15.452 E.03451 G1 X6.918 Y-15.452 E.01158 G1 X6.918 Y-14.329 E.03451 G1 F600 G1 X6.918 Y-13.748 E.01785 G1 X6.541 Y-13.748 E.01158 G1 X6.541 Y-14.329 E.01785 G1 F1500 G1 X6.541 Y-15.452 E.03451 G1 X6.164 Y-15.452 E.01158 G1 X6.164 Y-11.278 E.12826 G1 X5.787 Y-11.278 E.01158 G1 X5.787 Y-15.452 E.12826 G1 X5.409 Y-15.452 E.01161 G1 X5.409 Y-11.278 E.12826 G1 X5.032 Y-11.278 E.01158 G1 X5.032 Y-15.452 E.12826 G1 X4.655 Y-15.452 E.01158 G1 X4.655 Y-11.278 E.12826 G1 X4.278 Y-11.278 E.01158 G1 X4.278 Y-15.452 E.12826 G1 X3.901 Y-15.452 E.01158 G1 X3.901 Y-11.278 E.12826 G1 X3.524 Y-11.278 E.01158 G1 X3.524 Y-15.622 E.13348 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X3.524 Y-13.622 ;WIPE_END G17 G3 Z84.2 I-1.217 J-.001 P1 F30000 G1 X3.498 Y9.952 Z84.2 G1 Z83.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 M106 S255 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6716 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.099 Y18.74 Z84.2 F30000 G1 X3.498 Y40.648 Z84.2 G1 Z83.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.608 E.18098 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.34 Y40.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6716 G1 X6.905 Y40.745 E.08509 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.745 E.19903 G1 X4.3 Y40.745 E.0131 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z84.2 F30000 G1 X33.195 Y40.745 Z84.2 G1 Z83.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6716 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F6716 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:84 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;84 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;84 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z84.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z84.4 G1 Z84 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z84.4 F30000 G1 X3.498 Y-10.952 Z84.4 G1 Z84 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3334 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z84.4 F30000 G1 Z84 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3334 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3334 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3334 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3334 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3334 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G17 G3 Z84.4 I-1.217 J.002 P1 F30000 G1 X3.498 Y9.952 Z84.4 G1 Z84 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3334 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z84.4 F30000 G1 X3.498 Y40.31 Z84.4 G1 Z84 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3334 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z84.4 F30000 G1 X33.195 Y40.745 Z84.4 G1 Z84 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3334 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3334 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3334 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:84.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;84.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;84.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z84.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z84.6 G1 Z84.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z84.6 F30000 G1 X3.498 Y-10.952 Z84.6 G1 Z84.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G17 G3 Z84.6 I1.125 J.463 P1 F30000 G1 X6.472 Y-13.244 Z84.6 G1 Z84.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3342 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3342 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3342 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G17 G3 Z84.6 I-1.208 J-.151 P1 F30000 G1 X3.498 Y9.952 Z84.6 G1 Z84.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z84.6 F30000 G1 X3.498 Y40.31 Z84.6 G1 Z84.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3342 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z84.6 F30000 G1 X33.195 Y40.745 Z84.6 G1 Z84.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3342 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3342 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 M73 P87 R14 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3342 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:84.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;84.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;84.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z84.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z84.8 G1 Z84.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z84.8 F30000 G1 X3.498 Y-10.952 Z84.8 G1 Z84.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z84.8 F30000 G1 Z84.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3325 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3325 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3325 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G1 X3.462 Y-7.729 Z84.8 F30000 G1 X3.498 Y9.952 Z84.8 G1 Z84.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z84.8 F30000 G1 X3.498 Y40.31 Z84.8 G1 Z84.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z84.8 F30000 G1 X33.195 Y40.745 Z84.8 G1 Z84.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3325 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:84.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;84.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;84.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z85 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z85 G1 Z84.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3103 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3103 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z85 F30000 G1 X3.498 Y-10.952 Z85 G1 Z84.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3103 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3103 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3103 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X5.617 Y-11.54 Z85 F30000 G1 Z84.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F3103 G1 X3.988 Y-11.54 E.05401 G1 X3.69 Y-12.016 E.01863 G1 X3.69 Y-13.047 E.03418 G2 X4.341 Y-12.862 I.457 J-.369 E.02394 G2 X5.91 Y-14.009 I-.585 J-2.445 E.06618 G1 X5.91 Y-14.14 E.00436 G1 X5.992 Y-14.14 E.00273 G1 X6.307 Y-14.643 E.01969 G3 X7.41 Y-14.678 I.575 J.724 E.03922 G1 X7.41 Y-14.14 E.01783 G1 X6.319 Y-14.14 E.03618 G1 X6.204 Y-11.265 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.38292 G1 F3103 G1 X6.204 Y-13.756 E.06901 G1 X6.223 Y-13.846 E.00256 G1 X7.613 Y-13.846 E.03853 G1 X7.704 Y-13.865 E.00256 G1 X7.704 Y-15.263 E.03874 G1 X7.685 Y-15.354 E.00256 G1 X3.487 Y-15.354 E.11632 G1 X3.396 Y-15.335 E.00256 G1 X3.396 Y-11.337 E.11078 G1 X3.415 Y-11.246 E.00256 G1 X6.165 Y-11.257 E.07619 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X4.165 Y-11.249 ;WIPE_END G1 X3.925 Y-3.62 Z85 F30000 G1 X3.498 Y9.952 Z85 G1 Z84.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3103 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3103 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3103 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z85 F30000 G1 X3.498 Y40.31 Z85 G1 Z84.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3103 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3103 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3103 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z85 F30000 G1 X33.195 Y40.745 Z85 G1 Z84.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3103 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3103 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3103 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:84.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;84.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;84.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z85.2 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z85.2 G1 Z84.8 M73 P87 R13 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3372 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3372 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z85.2 F30000 G1 X3.498 Y-10.952 Z85.2 G1 Z84.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3372 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3372 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3372 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.468 Y-11.43 Z85.2 F30000 G1 Z84.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Internal Bridge ;WIDTH:0.4 ;HEIGHT:0.4 G1 F3000 G1 X6.076 Y-11.185 E.02369 G1 X5.228 Y-11.185 E.04343 G1 X6.265 Y-11.834 E.06269 G1 X6.265 Y-12.365 E.02718 G1 X4.379 Y-11.185 E.11392 G1 X3.531 Y-11.185 E.04343 G1 X6.468 Y-13.023 E.17738 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.362 Y-13.582 F30000 SET_VELOCITY_LIMIT ACCEL=2500 G1 F3000 G1 X7.765 Y-13.835 E.02439 G1 X7.765 Y-14.366 E.02718 G1 X6.837 Y-13.785 E.05608 G1 X6.265 Y-13.785 E.02926 G1 X6.265 Y-13.427 E.01832 G1 X3.335 Y-11.592 E.17703 G1 X3.335 Y-12.123 E.02718 G1 X7.765 Y-14.897 E.26764 G1 X7.765 Y-15.415 E.02656 G1 X7.746 Y-15.415 E.00099 G1 X3.335 Y-12.654 E.26647 G1 X3.335 Y-13.185 E.02718 G1 X6.898 Y-15.415 E.21524 G1 X6.05 Y-15.415 E.04343 G1 X3.335 Y-13.716 E.16401 G1 X3.335 Y-14.247 E.02718 G1 X5.202 Y-15.415 E.11278 G1 X4.354 Y-15.415 E.04343 G1 X3.335 Y-14.778 E.06155 G1 X3.335 Y-15.309 E.02718 G1 X3.829 Y-15.618 E.02986 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F3000 G1 X3.335 Y-15.309 G1 X3.335 Y-14.778 G1 X4.086 Y-15.248 ;WIPE_END G1 X3.908 Y-7.617 Z85.2 F30000 G1 X3.498 Y9.952 Z85.2 G1 Z84.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 ;HEIGHT:0.2 G1 F3372 M106 S255 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3372 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3372 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z85.2 F30000 G1 X3.498 Y40.31 Z85.2 G1 Z84.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3372 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3372 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3372 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z85.2 F30000 G1 X33.195 Y40.745 Z85.2 G1 Z84.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3372 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3372 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3372 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:85 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;85 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;85 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z85.4 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z85.4 G1 Z85 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z85.4 F30000 G1 X3.498 Y-10.952 Z85.4 G1 Z85 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-13.244 Z85.4 F30000 G1 Z85 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3323 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3323 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3323 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G1 X5.647 Y-7.26 Z85.4 F30000 G1 X3.498 Y9.952 Z85.4 G1 Z85 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z85.4 F30000 G1 X3.498 Y40.31 Z85.4 G1 Z85 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z85.4 F30000 G1 X33.195 Y40.745 Z85.4 G1 Z85 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3323 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:85.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;85.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;85.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z85.6 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z85.6 G1 Z85.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z85.6 F30000 G1 X3.498 Y-10.952 Z85.6 G1 Z85.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.069 Y-11.381 Z85.6 F30000 G1 Z85.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.493096 G1 F3325 G1 X6.069 Y-12.149 E.02819 G1 X5.301 Y-11.381 E.03987 G1 X6.029 Y-11.381 E.02672 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.688 Y-13.92 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X7.624 Y-13.884 E.00204 G1 X7.689 Y-13.849 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.588 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.427542 G1 F3325 G1 X6.962 Y-13.578 E.04477 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-13.088 F30000 SET_VELOCITY_LIMIT ACCEL=7000 G1 F3325 G1 X4.531 Y-11.148 E.08601 G1 X3.987 Y-11.148 E.01705 G1 X7.802 Y-14.963 E.16908 G1 X7.802 Y-15.452 E.01533 G1 X7.747 Y-15.452 E.00172 G1 X3.443 Y-11.148 E.19076 G1 X3.402 Y-11.148 E.00129 G1 X3.316 Y-11.451 E.00986 G1 X3.316 Y-11.564 E.00356 G1 X7.203 Y-15.452 E.17231 G1 X6.659 Y-15.452 E.01705 G1 X3.316 Y-12.108 E.1482 G1 X3.316 Y-12.652 E.01705 G1 X6.115 Y-15.452 E.12409 G1 X5.571 Y-15.452 E.01705 G1 X3.316 Y-13.196 E.09998 G1 X3.316 Y-13.74 E.01705 G1 X5.027 Y-15.452 E.07587 G1 X4.483 Y-15.452 E.01705 G1 X3.316 Y-14.284 E.05176 G1 X3.316 Y-14.692 E.01277 G1 X3.298 Y-14.709 E.00078 G1 X3.298 Y-14.81 E.00318 G1 X4.109 Y-15.622 E.03595 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.446 Y-15.362 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.38292 G1 F3325 G1 X3.383 Y-15.325 E.00204 G1 X3.448 Y-15.29 E.00204 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X3.383 Y-15.325 G1 X3.446 Y-15.362 ;WIPE_END G1 X3.462 Y-7.729 Z85.6 F30000 G1 X3.498 Y9.952 Z85.6 G1 Z85.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z85.6 F30000 G1 X3.498 Y40.31 Z85.6 G1 Z85.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3325 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z85.6 F30000 G1 X33.195 Y40.745 Z85.6 G1 Z85.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3325 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3325 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3325 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:85.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;85.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;85.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z85.8 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z85.8 G1 Z85.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z85.8 F30000 G1 X3.498 Y-10.952 Z85.8 G1 Z85.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-13.244 Z85.8 F30000 G1 Z85.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.427542 G1 F3323 G1 X4.264 Y-15.452 E.09784 G1 X3.72 Y-15.452 E.01705 G1 X6.302 Y-12.87 E.11443 G1 X6.302 Y-12.326 E.01705 G1 X3.298 Y-15.33 E.13314 G1 X3.298 Y-14.786 E.01705 G1 X6.302 Y-11.782 E.13314 G1 X6.302 Y-11.238 E.01705 G1 X3.298 Y-14.242 E.13314 G1 X3.298 Y-13.698 E.01705 G1 X5.848 Y-11.148 E.11303 G1 X5.304 Y-11.148 E.01705 G1 X3.298 Y-13.154 E.08892 G1 X3.298 Y-12.61 E.01705 G1 X4.76 Y-11.148 E.06481 G1 X4.216 Y-11.148 E.01705 G1 X3.298 Y-12.066 E.0407 G1 X3.298 Y-11.522 E.01705 G1 X3.842 Y-10.978 E.02411 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.606 Y-13.944 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F3323 G1 X7.606 Y-15.256 E.0403 G1 X4.945 Y-15.256 E.08175 G1 X6.276 Y-13.926 E.05781 G3 X7.566 Y-13.944 I.982 J23.343 E.03965 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.184 Y-14.366 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.510222 G1 F3323 G1 X7.184 Y-14.834 E.01779 G1 X5.965 Y-14.834 E.04642 G1 X6.432 Y-14.366 E.02517 G1 X7.144 Y-14.366 E.0271 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X6.432 Y-14.366 G1 X5.965 Y-14.834 G1 X6.592 Y-14.834 ;WIPE_END G1 X5.647 Y-7.26 Z85.8 F30000 G1 X3.498 Y9.952 Z85.8 G1 Z85.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z85.8 F30000 G1 X3.498 Y40.31 Z85.8 G1 Z85.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3323 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z85.8 F30000 G1 X33.195 Y40.745 Z85.8 G1 Z85.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3323 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3323 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3323 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:85.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;85.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;85.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z86 I1.216 J-.056 P1 F30000 G1 X31.195 Y-10.545 Z86 G1 Z85.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3434 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3434 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.947 Y-11.198 Z86 F30000 G1 X3.498 Y-10.952 Z86 G1 Z85.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3434 G1 X3.498 Y-6.952 E.13269 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-15.648 E.28846 G1 X7.998 Y-15.648 E.1624 G1 X7.998 Y-13.552 E.06952 G1 X6.498 Y-13.552 E.04976 G1 X6.498 Y-10.952 E.08625 G1 X3.538 Y-10.952 E.09819 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3434 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-16.055 E.31546 G1 X8.405 Y-16.055 E.18941 G1 X8.405 Y-13.145 E.09653 G1 X6.905 Y-13.145 E.04976 G1 X6.905 Y-10.545 E.08625 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3434 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-16.49 E.31895 G1 X8.84 Y-16.49 E.20219 G1 X8.84 Y-12.71 E.11615 G1 X7.34 Y-12.71 E.04609 G1 X7.34 Y-10.11 E.07989 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X6.472 Y-11.747 Z86 F30000 G1 Z85.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.422953 G1 F3434 G1 X5.703 Y-10.978 E.03366 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.166 Y-10.978 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X6.472 Y-12.284 E.0572 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.472 Y-12.822 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X4.628 Y-10.978 E.08073 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.091 Y-10.978 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X6.472 Y-13.359 E.10427 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.228 Y-13.578 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X7.972 Y-14.322 E.03256 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.972 Y-14.859 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X6.691 Y-13.578 E.0561 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X7.972 Y-14.859 ;WIPE_END G1 X7.972 Y-15.397 Z86 F30000 G1 Z85.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X3.553 Y-10.978 E.1935 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-10.359 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X3.128 Y-10.016 E.01503 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-10.554 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X3.472 Y-10.897 E.01503 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-11.091 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X7.659 Y-15.622 E.19842 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.122 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X3.128 Y-11.628 E.17488 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-12.166 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X6.584 Y-15.622 E.15134 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.047 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X3.128 Y-12.703 E.1278 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-13.241 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X5.509 Y-15.622 E.10427 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.972 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X3.128 Y-13.778 E.08073 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-14.316 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X4.434 Y-15.622 E.05719 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.897 Y-15.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F3434 G1 X3.128 Y-14.853 E.03365 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.897 Y-15.622 ;WIPE_END G1 X3.778 Y-7.99 Z86 F30000 G1 X3.498 Y9.952 Z86 G1 Z85.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3434 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3434 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3434 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.097 Y18.739 Z86 F30000 G1 X3.498 Y40.31 Z86 G1 Z85.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3434 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F3434 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3434 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X13.971 Y40.424 Z86 F30000 G1 X33.195 Y40.745 Z86 G1 Z85.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F3434 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F3434 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F3434 G1 X33.55 Y38.949 E.04697 ;LAYER_CHANGE ;Z:85.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;85.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END ;AFTER_LAYER_CHANGE ;85.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z86.2 I.35 J-1.166 P1 F30000 G1 X33.195 Y40.745 Z86.2 G1 Z85.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z86.2 F30000 G1 X3.498 Y40.31 Z86.2 G1 Z85.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z86.2 F30000 G1 X3.498 Y9.952 Z86.2 G1 Z85.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z86.2 F30000 G1 X3.498 Y-10.448 Z86.2 G1 Z85.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z86.2 F30000 G1 X31.195 Y-10.545 Z86.2 G1 Z85.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:86 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;86 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;86 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z86.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z86.4 G1 Z86 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z86.4 F30000 G1 X3.498 Y40.31 Z86.4 G1 Z86 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 M73 P88 R13 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z86.4 F30000 G1 X3.498 Y9.952 Z86.4 G1 Z86 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z86.4 F30000 G1 X3.498 Y-10.448 Z86.4 G1 Z86 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z86.4 F30000 G1 X31.195 Y-10.545 Z86.4 G1 Z86 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:86.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;86.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;86.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z86.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z86.6 G1 Z86.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z86.6 F30000 G1 X3.498 Y40.31 Z86.6 G1 Z86.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z86.6 F30000 G1 X3.498 Y9.952 Z86.6 G1 Z86.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z86.6 F30000 G1 X3.498 Y-10.448 Z86.6 M73 P88 R12 G1 Z86.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z86.6 F30000 G1 X31.195 Y-10.545 Z86.6 G1 Z86.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:86.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;86.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;86.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z86.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z86.8 G1 Z86.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z86.8 F30000 G1 X3.498 Y40.31 Z86.8 G1 Z86.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z86.8 F30000 G1 X3.498 Y9.952 Z86.8 G1 Z86.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z86.8 F30000 G1 X3.498 Y-10.448 Z86.8 G1 Z86.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z86.8 F30000 G1 X31.195 Y-10.545 Z86.8 G1 Z86.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:86.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;86.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;86.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z87 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z87 G1 Z86.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z87 F30000 G1 X3.498 Y40.31 Z87 G1 Z86.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z87 F30000 G1 X3.498 Y9.952 Z87 G1 Z86.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z87 F30000 G1 X3.498 Y-10.448 Z87 G1 Z86.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z87 F30000 G1 X31.195 Y-10.545 Z87 G1 Z86.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:86.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;86.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;86.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z87.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z87.2 G1 Z86.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z87.2 F30000 G1 X3.498 Y40.31 Z87.2 G1 Z86.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z87.2 F30000 G1 X3.498 Y9.952 Z87.2 G1 Z86.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z87.2 F30000 G1 X3.498 Y-10.448 Z87.2 G1 Z86.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z87.2 F30000 G1 X31.195 Y-10.545 Z87.2 G1 Z86.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:87 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;87 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;87 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z87.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z87.4 G1 Z87 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z87.4 F30000 G1 X3.498 Y40.31 Z87.4 G1 Z87 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z87.4 F30000 G1 X3.498 Y9.952 Z87.4 G1 Z87 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z87.4 F30000 G1 X3.498 Y-10.448 Z87.4 G1 Z87 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z87.4 F30000 G1 X31.195 Y-10.545 Z87.4 G1 Z87 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:87.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;87.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;87.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z87.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z87.6 G1 Z87.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z87.6 F30000 G1 X3.498 Y40.31 Z87.6 G1 Z87.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z87.6 F30000 G1 X3.498 Y9.952 Z87.6 G1 Z87.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z87.6 F30000 G1 X3.498 Y-10.448 Z87.6 G1 Z87.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z87.6 F30000 G1 X31.195 Y-10.545 Z87.6 G1 Z87.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:87.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;87.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;87.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z87.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z87.8 G1 Z87.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z87.8 F30000 G1 X3.498 Y40.31 Z87.8 G1 Z87.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z87.8 F30000 G1 X3.498 Y9.952 Z87.8 G1 Z87.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z87.8 F30000 G1 X3.498 Y-10.448 Z87.8 G1 Z87.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z87.8 F30000 G1 X31.195 Y-10.545 Z87.8 G1 Z87.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:87.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;87.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;87.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z88 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z88 G1 Z87.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z88 F30000 G1 X3.498 Y40.31 Z88 G1 Z87.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z88 F30000 G1 X3.498 Y9.952 Z88 G1 Z87.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z88 F30000 G1 X3.498 Y-10.448 Z88 G1 Z87.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z88 F30000 G1 X31.195 Y-10.545 Z88 G1 Z87.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:87.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;87.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;87.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z88.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z88.2 G1 Z87.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z88.2 F30000 G1 X3.498 Y40.31 Z88.2 G1 Z87.8 M73 P89 R12 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z88.2 F30000 G1 X3.498 Y9.952 Z88.2 G1 Z87.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z88.2 F30000 G1 X3.498 Y-10.448 Z88.2 G1 Z87.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 M73 P89 R11 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z88.2 F30000 G1 X31.195 Y-10.545 Z88.2 G1 Z87.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:88 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;88 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;88 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z88.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z88.4 G1 Z88 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z88.4 F30000 G1 X3.498 Y40.31 Z88.4 G1 Z88 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z88.4 F30000 G1 X3.498 Y9.952 Z88.4 G1 Z88 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z88.4 F30000 G1 X3.498 Y-10.448 Z88.4 G1 Z88 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z88.4 F30000 G1 X31.195 Y-10.545 Z88.4 G1 Z88 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:88.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;88.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;88.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z88.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z88.6 G1 Z88.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z88.6 F30000 G1 X3.498 Y40.31 Z88.6 G1 Z88.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z88.6 F30000 G1 X3.498 Y9.952 Z88.6 G1 Z88.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z88.6 F30000 G1 X3.498 Y-10.448 Z88.6 G1 Z88.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z88.6 F30000 G1 X31.195 Y-10.545 Z88.6 G1 Z88.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:88.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;88.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;88.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z88.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z88.8 G1 Z88.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z88.8 F30000 G1 X3.498 Y40.31 Z88.8 G1 Z88.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z88.8 F30000 G1 X3.498 Y9.952 Z88.8 G1 Z88.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z88.8 F30000 G1 X3.498 Y-10.448 Z88.8 G1 Z88.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z88.8 F30000 G1 X31.195 Y-10.545 Z88.8 G1 Z88.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:88.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;88.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;88.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z89 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z89 G1 Z88.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z89 F30000 G1 X3.498 Y40.31 Z89 G1 Z88.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z89 F30000 G1 X3.498 Y9.952 Z89 G1 Z88.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z89 F30000 G1 X3.498 Y-10.448 Z89 G1 Z88.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z89 F30000 G1 X31.195 Y-10.545 Z89 G1 Z88.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:88.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;88.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;88.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z89.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z89.2 G1 Z88.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z89.2 F30000 G1 X3.498 Y40.31 Z89.2 G1 Z88.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z89.2 F30000 G1 X3.498 Y9.952 Z89.2 G1 Z88.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z89.2 F30000 G1 X3.498 Y-10.448 Z89.2 G1 Z88.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z89.2 F30000 G1 X31.195 Y-10.545 Z89.2 G1 Z88.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:89 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;89 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;89 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z89.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z89.4 G1 Z89 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z89.4 F30000 G1 X3.498 Y40.31 Z89.4 G1 Z89 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z89.4 F30000 G1 X3.498 Y9.952 Z89.4 G1 Z89 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z89.4 F30000 G1 X3.498 Y-10.448 Z89.4 G1 Z89 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z89.4 F30000 G1 X31.195 Y-10.545 Z89.4 G1 Z89 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:89.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;89.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;89.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z89.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z89.6 G1 Z89.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z89.6 F30000 G1 X3.498 Y40.31 Z89.6 G1 Z89.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z89.6 F30000 G1 X3.498 Y9.952 Z89.6 G1 Z89.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z89.6 F30000 G1 X3.498 Y-10.448 Z89.6 G1 Z89.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z89.6 F30000 G1 X31.195 Y-10.545 Z89.6 G1 Z89.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:89.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;89.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;89.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z89.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z89.8 G1 Z89.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z89.8 F30000 G1 X3.498 Y40.31 Z89.8 G1 Z89.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z89.8 F30000 G1 X3.498 Y9.952 Z89.8 G1 Z89.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z89.8 F30000 G1 X3.498 Y-10.448 Z89.8 G1 Z89.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z89.8 F30000 G1 X31.195 Y-10.545 Z89.8 G1 Z89.4 G1 E.8 F1800 M73 P89 R10 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:89.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;89.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;89.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z90 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z90 G1 Z89.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 M73 P90 R10 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z90 F30000 G1 X3.498 Y40.31 Z90 G1 Z89.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z90 F30000 G1 X3.498 Y9.952 Z90 G1 Z89.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z90 F30000 G1 X3.498 Y-10.448 Z90 G1 Z89.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z90 F30000 G1 X31.195 Y-10.545 Z90 G1 Z89.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:89.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;89.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;89.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z90.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z90.2 G1 Z89.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z90.2 F30000 G1 X3.498 Y40.31 Z90.2 G1 Z89.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z90.2 F30000 G1 X3.498 Y9.952 Z90.2 G1 Z89.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z90.2 F30000 G1 X3.498 Y-10.448 Z90.2 G1 Z89.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z90.2 F30000 G1 X31.195 Y-10.545 Z90.2 G1 Z89.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:90 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;90 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;90 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z90.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z90.4 G1 Z90 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z90.4 F30000 G1 X3.498 Y40.31 Z90.4 G1 Z90 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z90.4 F30000 G1 X3.498 Y9.952 Z90.4 G1 Z90 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z90.4 F30000 G1 X3.498 Y-10.448 Z90.4 G1 Z90 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z90.4 F30000 G1 X31.195 Y-10.545 Z90.4 G1 Z90 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:90.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;90.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;90.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z90.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z90.6 G1 Z90.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z90.6 F30000 G1 X3.498 Y40.31 Z90.6 G1 Z90.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z90.6 F30000 G1 X3.498 Y9.952 Z90.6 G1 Z90.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z90.6 F30000 G1 X3.498 Y-10.448 Z90.6 G1 Z90.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z90.6 F30000 G1 X31.195 Y-10.545 Z90.6 G1 Z90.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:90.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;90.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;90.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z90.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z90.8 G1 Z90.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z90.8 F30000 G1 X3.498 Y40.31 Z90.8 G1 Z90.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z90.8 F30000 G1 X3.498 Y9.952 Z90.8 G1 Z90.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z90.8 F30000 G1 X3.498 Y-10.448 Z90.8 G1 Z90.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z90.8 F30000 G1 X31.195 Y-10.545 Z90.8 G1 Z90.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:90.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;90.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;90.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z91 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z91 G1 Z90.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z91 F30000 G1 X3.498 Y40.31 Z91 G1 Z90.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z91 F30000 G1 X3.498 Y9.952 Z91 G1 Z90.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z91 F30000 G1 X3.498 Y-10.448 Z91 G1 Z90.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z91 F30000 G1 X31.195 Y-10.545 Z91 G1 Z90.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:90.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;90.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;90.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z91.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z91.2 G1 Z90.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z91.2 F30000 G1 X3.498 Y40.31 Z91.2 G1 Z90.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z91.2 F30000 G1 X3.498 Y9.952 Z91.2 G1 Z90.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z91.2 F30000 G1 X3.498 Y-10.448 Z91.2 G1 Z90.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z91.2 F30000 G1 X31.195 Y-10.545 Z91.2 G1 Z90.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:91 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;91 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;91 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z91.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z91.4 G1 Z91 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z91.4 F30000 G1 X3.498 Y40.31 Z91.4 G1 Z91 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z91.4 F30000 G1 X3.498 Y9.952 Z91.4 G1 Z91 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z91.4 F30000 G1 X3.498 Y-10.448 Z91.4 G1 Z91 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z91.4 F30000 G1 X31.195 Y-10.545 Z91.4 G1 Z91 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:91.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;91.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;91.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z91.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z91.6 G1 Z91.2 M73 P90 R9 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z91.6 F30000 G1 X3.498 Y40.31 Z91.6 G1 Z91.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z91.6 F30000 G1 X3.498 Y9.952 Z91.6 G1 Z91.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z91.6 F30000 G1 X3.498 Y-10.448 Z91.6 G1 Z91.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z91.6 F30000 G1 X31.195 Y-10.545 Z91.6 G1 Z91.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:91.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;91.4 G1 E-.8 F1800 M73 P91 R9 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;91.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z91.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z91.8 G1 Z91.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z91.8 F30000 G1 X3.498 Y40.31 Z91.8 G1 Z91.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z91.8 F30000 G1 X3.498 Y9.952 Z91.8 G1 Z91.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z91.8 F30000 G1 X3.498 Y-10.448 Z91.8 G1 Z91.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z91.8 F30000 G1 X31.195 Y-10.545 Z91.8 G1 Z91.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:91.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;91.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;91.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z92 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z92 G1 Z91.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z92 F30000 G1 X3.498 Y40.31 Z92 G1 Z91.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z92 F30000 G1 X3.498 Y9.952 Z92 G1 Z91.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z92 F30000 G1 X3.498 Y-10.448 Z92 G1 Z91.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z92 F30000 G1 X31.195 Y-10.545 Z92 G1 Z91.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:91.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;91.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;91.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z92.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z92.2 G1 Z91.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z92.2 F30000 G1 X3.498 Y40.31 Z92.2 G1 Z91.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z92.2 F30000 G1 X3.498 Y9.952 Z92.2 G1 Z91.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z92.2 F30000 G1 X3.498 Y-10.448 Z92.2 G1 Z91.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z92.2 F30000 G1 X31.195 Y-10.545 Z92.2 G1 Z91.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:92 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;92 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;92 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z92.4 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z92.4 G1 Z92 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z92.4 F30000 G1 X3.498 Y40.31 Z92.4 G1 Z92 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z92.4 F30000 G1 X3.498 Y9.952 Z92.4 G1 Z92 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z92.4 F30000 G1 X3.498 Y-10.448 Z92.4 G1 Z92 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z92.4 F30000 G1 X31.195 Y-10.545 Z92.4 G1 Z92 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:92.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;92.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;92.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z92.6 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z92.6 G1 Z92.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z92.6 F30000 G1 X3.498 Y40.31 Z92.6 G1 Z92.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z92.6 F30000 G1 X3.498 Y9.952 Z92.6 G1 Z92.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z92.6 F30000 G1 X3.498 Y-10.448 Z92.6 G1 Z92.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z92.6 F30000 G1 X31.195 Y-10.545 Z92.6 G1 Z92.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:92.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;92.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;92.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z92.8 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z92.8 G1 Z92.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z92.8 F30000 G1 X3.498 Y40.31 Z92.8 G1 Z92.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z92.8 F30000 G1 X3.498 Y9.952 Z92.8 G1 Z92.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z92.8 F30000 G1 X3.498 Y-10.448 Z92.8 G1 Z92.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z92.8 F30000 G1 X31.195 Y-10.545 Z92.8 G1 Z92.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:92.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;92.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;92.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z93 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z93 G1 Z92.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F2263 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X25.919 Y40.714 Z93 F30000 G1 X3.498 Y40.31 Z93 G1 Z92.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y40.648 E.01121 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y35.152 E.18231 G1 X3.498 Y35.152 E.01313 G1 X3.498 Y40.27 E.16977 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y40.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y40.745 E.01443 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y34.745 E.20931 G1 X3.905 Y34.745 E.04014 G1 X3.905 Y40.27 E.18327 G1 X4.34 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y34.31 E.22062 G1 X4.34 Y34.31 E.06391 G1 X4.34 Y40.27 E.18313 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y40.297 ;WIPE_END G1 X5.628 Y32.697 Z93 F30000 G1 X3.498 Y9.952 Z93 G1 Z92.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y17.848 E.26192 G1 X3.102 Y17.848 E.01313 G1 X3.102 Y9.952 E.26192 G1 X3.458 Y9.952 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y9.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y18.255 E.28893 G1 X2.695 Y18.255 E.04014 G1 X2.695 Y9.545 E.28893 G1 X3.865 Y9.545 E.03881 G1 X4.34 Y9.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y18.69 E.29437 G1 X2.26 Y18.69 E.06391 G1 X2.26 Y9.11 E.29437 G1 X4.3 Y9.11 E.06268 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.308 Y11.11 ;WIPE_END G1 X4.022 Y3.483 Z93 F30000 G1 X3.498 Y-10.448 Z93 G1 Z92.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X3.498 Y-6.952 E.11596 G1 X3.102 Y-6.952 E.01313 G1 X3.102 Y-10.448 E.11596 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2263 G1 X3.905 Y-6.545 E.13269 G1 X2.695 Y-6.545 E.04014 G1 X2.695 Y-10.855 E.14297 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X4.34 Y-6.11 E.12291 G1 X2.26 Y-6.11 E.06391 G1 X2.26 Y-11.29 E.15917 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.36 Y-8.11 ;WIPE_END G1 X11.961 Y-8.8 Z93 F30000 G1 X31.195 Y-10.545 Z93 G1 Z92.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2263 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2263 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 ;LAYER_CHANGE ;Z:92.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;92.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;92.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z93.2 I-1.216 J.038 P1 F30000 G1 X33.195 Y40.745 Z93.2 G1 Z92.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z93.2 F30000 G1 X31.195 Y-10.545 Z93.2 G1 Z92.8 M73 P91 R8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z93.2 F30000 G1 X3.498 Y-10.448 Z93.2 G1 Z92.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.498 Y-6.8 E.12101 G1 F2400 G1 X3.498 Y-5.9 E.02985 G1 F600 G1 X3.498 Y-5.7 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.498 Y-4.6 E.03649 G1 X3.498 Y7.6 E.4047 G1 X3.498 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X3.498 Y9.8 E.03649 G1 F18000 G1 X3.498 Y18 E.27201 G1 F600 G1 X3.498 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.498 Y20.2 E.03649 G1 X3.498 Y32.8 E.41797 G1 X3.498 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.498 Y34.1 E.00663 M106 S255 G1 F2400 G1 X3.498 Y35 E.02985 G1 F18000 G1 X3.498 Y40.648 E.18735 G1 X3.102 Y40.648 E.01314 G1 X3.102 Y35 E.18735 G1 F2400 G1 X3.102 Y34.1 E.02985 G1 F600 G1 X3.102 Y33.9 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y32.8 E.03649 G1 X3.102 Y20.2 E.41797 G1 X3.102 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X3.102 Y18 E.03649 G1 F18000 G1 X3.102 Y9.8 E.27201 G1 F600 G1 X3.102 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y7.6 E.03649 G1 X3.102 Y-4.6 E.4047 G1 X3.102 Y-5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.102 Y-5.9 E.00663 M106 S255 G1 F2400 G1 X3.102 Y-6.8 E.02985 G1 F18000 G1 X3.102 Y-10.448 E.12101 G1 X3.458 Y-10.448 E.01181 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X3.905 Y-6.8 E.12423 G1 F2400 G1 X3.905 Y-5.9 E.02985 G1 F600 G1 X3.905 Y-5.7 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.905 Y-4.6 E.03649 G1 X3.905 Y7.6 E.4047 G1 X3.905 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X3.905 Y9.8 E.03649 G1 F18000 G1 X3.905 Y18 E.27201 G1 F600 G1 X3.905 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.905 Y20.2 E.03649 G1 X3.905 Y32.8 E.41797 G1 X3.905 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.905 Y34.1 E.00663 M106 S255 G1 F2400 G1 X3.905 Y35 E.02985 G1 F18000 G1 X3.905 Y40.745 E.19057 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y40.8 E.00846 G1 X2.695 Y35 E.1924 G1 F2400 G1 X2.695 Y34.1 E.02985 G1 F600 G1 X2.695 Y33.9 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y32.8 E.03649 G1 X2.695 Y20.2 E.41797 G1 X2.695 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall M106 S255 G1 X2.695 Y18 E.03649 G1 F18000 G1 X2.695 Y9.8 E.27201 G1 F600 M73 P92 R8 G1 X2.695 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y7.6 E.03649 G1 X2.695 Y-4.6 E.4047 G1 X2.695 Y-5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X2.695 Y-5.9 E.00663 M106 S255 G1 F2400 G1 X2.695 Y-6.8 E.02985 G1 F18000 G1 X2.695 Y-10.6 E.12605 G1 X2.695 Y-10.855 E.00846 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y-6.74 E.08687 G1 F2400 G1 X4.34 Y-5.9 E.02581 G1 F600 G1 X4.34 Y-5.7 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X4.34 Y-4.6 E.03649 G1 X4.34 Y7.6 E.4047 G1 X4.34 Y8.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X4.34 Y9.74 E.03196 G1 F12000 G1 X4.34 Y18.06 E.25565 G1 F600 G1 X4.34 Y19.1 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X4.34 Y20.2 E.03649 G1 X4.34 Y32.8 E.41797 G1 X4.34 Y33.9 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X4.34 Y34.1 E.00615 M106 S255 G1 F2400 G1 X4.34 Y34.94 E.02581 G1 F12000 G1 X4.34 Y39.767 E.14832 G1 X4.34 Y40.31 E.01668 G1 X4.883 Y40.31 E.01668 G1 X6.71 Y40.31 E.05614 G1 X7.34 Y40.31 E.01936 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y40.86 E.01936 G1 X2.26 Y34.94 E.18191 G1 F2400 G1 X2.26 Y34.1 E.02581 G1 F600 G1 X2.26 Y33.9 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y32.8 E.03649 G1 X2.26 Y20.2 E.41797 G1 X2.26 Y19.1 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 M106 S255 G1 X2.26 Y18.06 E.03196 G1 F12000 G1 X2.26 Y9.74 E.25565 G1 F600 G1 X2.26 Y8.7 E.03196 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y7.6 E.03649 G1 X2.26 Y-4.6 E.4047 G1 X2.26 Y-5.7 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X2.26 Y-5.9 E.00615 M106 S255 G1 F2400 G1 X2.26 Y-6.74 E.02581 G1 F12000 G1 X2.26 Y-10.66 E.12045 G1 X2.26 Y-11.29 E.01936 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X6.71 Y-10.11 E.01936 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 ;LAYER_CHANGE ;Z:93 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;93 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.362 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;93 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z93.4 I-1.048 J.619 P1 F30000 G1 X33.195 Y40.745 Z93.4 G1 Z93 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z93.4 F30000 G1 X31.195 Y-10.545 Z93.4 G1 Z93 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z93.4 F30000 G1 X3.498 Y-10.448 Z93.4 G1 Z93 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:93.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;93.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;93.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z93.6 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z93.6 G1 Z93.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z93.6 F30000 G1 X31.195 Y-10.545 Z93.6 G1 Z93.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z93.6 F30000 G1 X3.498 Y-10.448 Z93.6 G1 Z93.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:93.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;93.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;93.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z93.8 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z93.8 G1 Z93.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z93.8 F30000 G1 X31.195 Y-10.545 Z93.8 G1 Z93.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z93.8 F30000 G1 X3.498 Y-10.448 Z93.8 G1 Z93.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:93.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;93.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;93.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z94 I-1.048 J.618 P1 F30000 G1 X33.195 Y40.745 Z94 G1 Z93.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X31.195 Y41.055 E.0899 G1 X31.195 Y40.745 E.01028 G1 X33.155 Y40.745 E.06502 G1 X32.76 Y40.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X30.76 Y41.49 E.11 G1 X30.76 Y40.31 E.03626 G1 X32.72 Y40.31 E.06023 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.55 Y40.851 F30000 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F4064 G1 X33.55 Y38.949 E.04697 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y40.851 ;WIPE_END G1 X33.201 Y33.227 Z94 F30000 G1 X31.195 Y-10.545 Z94 G1 Z93.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X31.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.0899 G1 X33.905 Y-10.545 E.01028 G1 X31.235 Y-10.545 E.08857 G1 X30.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X30.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.11 G1 X34.34 Y-10.11 E.03626 G1 X30.8 Y-10.11 E.10877 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X30.76 Y-11.29 G1 X31.579 Y-11.29 ;WIPE_END G1 X23.95 Y-11.061 Z94 F30000 G1 X3.498 Y-10.448 Z94 G1 Z93.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F4064 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F4064 G1 X3.905 Y40.745 E1.70138 G1 X6.905 Y40.745 E.09952 G1 X6.905 Y41.055 E.01028 G1 X2.695 Y41.055 E.13965 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.09819 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F4064 G1 X4.34 Y40.31 E1.54927 G1 X7.34 Y40.31 E.09218 G1 X7.34 Y41.49 E.03626 G1 X2.26 Y41.49 E.15609 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.09095 ;LAYER_CHANGE ;Z:93.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;93.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END ;AFTER_LAYER_CHANGE ;93.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z94.2 I1.139 J-.429 P1 F30000 G1 X3.498 Y-10.448 Z94.2 G1 Z93.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X3.905 Y40.745 E1.70138 G1 X6.65 Y40.745 E.09106 G1 F2400 G1 X7.55 Y40.745 E.02985 G1 F600 G1 X7.75 Y40.745 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y40.745 E.03649 G1 X29.25 Y40.745 E.67671 G1 X30.35 Y40.745 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.55 Y40.745 E.00663 M106 S255 G1 F2400 G1 X31.45 Y40.745 E.02985 G1 F18000 G1 X33.195 Y40.745 E.05788 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X33.65 Y41.055 E.00846 G1 X31.45 Y41.055 E.07298 G1 F2400 G1 X30.55 Y41.055 E.02985 G1 F600 G1 X30.35 Y41.055 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X29.25 Y41.055 E.03649 G1 X8.85 Y41.055 E.67671 G1 X7.75 Y41.055 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y41.055 E.00663 M106 S255 G1 F2400 G1 X6.65 Y41.055 E.02985 G1 F18000 G1 X2.95 Y41.055 E.12274 G1 X2.695 Y41.055 E.00846 G1 X2.695 Y-10.855 E1.72195 G1 X2.95 Y-10.855 E.00846 G1 X6.65 Y-10.855 E.12274 G1 F2400 G1 X7.55 Y-10.855 E.02985 G1 F600 G1 X7.75 Y-10.855 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y-10.855 E.03649 G1 X29.25 Y-10.855 E.67671 G1 X30.35 Y-10.855 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X30.55 Y-10.855 E.00663 M106 S255 G1 F2400 G1 X31.45 Y-10.855 E.02985 G1 F18000 G1 X33.65 Y-10.855 E.07298 G1 X33.905 Y-10.855 E.00846 G1 X33.905 Y-10.545 E.01028 G1 X33.65 Y-10.545 E.00846 G1 X31.45 Y-10.545 E.07298 G1 F2400 G1 X30.55 Y-10.545 E.02985 G1 F600 G1 X30.35 Y-10.545 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X29.25 Y-10.545 E.03649 G1 X8.85 Y-10.545 E.67671 G1 X7.75 Y-10.545 E.03649 M73 P92 R7 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y-10.545 E.00663 M106 S255 G1 F2400 G1 X6.65 Y-10.545 E.02985 G1 F18000 G1 X3.945 Y-10.545 E.08973 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y39.767 E1.5159 G1 X4.34 Y40.31 E.01668 G1 X4.883 Y40.31 E.01668 G1 X6.71 Y40.31 E.05614 G1 F2400 G1 X7.55 Y40.31 E.02581 G1 F600 G1 X7.75 Y40.31 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y40.31 E.03649 G1 X29.25 Y40.31 E.67671 G1 X30.35 Y40.31 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X30.55 Y40.31 E.00615 M106 S255 G1 F2400 G1 X31.39 Y40.31 E.02581 G1 F12000 G1 X32.217 Y40.31 E.02541 G1 X32.76 Y40.31 E.01668 G1 X32.76 Y39.767 E.01668 G1 X32.76 Y38.94 E.02541 G1 X32.76 Y38.31 E.01936 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X33.71 Y41.49 E.01936 G1 X31.39 Y41.49 E.07129 G1 F2400 G1 X30.55 Y41.49 E.02581 G1 F600 G1 X30.35 Y41.49 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X29.25 Y41.49 E.03649 G1 X8.85 Y41.49 E.67671 G1 X7.75 Y41.49 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y41.49 E.00615 M106 S255 G1 F2400 G1 X6.71 Y41.49 E.02581 G1 F12000 G1 X2.89 Y41.49 E.11738 G1 X2.26 Y41.49 E.01936 G1 X2.26 Y-11.29 E1.62178 G1 X2.89 Y-11.29 E.01936 G1 X6.71 Y-11.29 E.11738 G1 F2400 G1 X7.55 Y-11.29 E.02581 G1 F600 G1 X7.75 Y-11.29 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y-11.29 E.03649 G1 X29.25 Y-11.29 E.67671 G1 X30.35 Y-11.29 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X30.55 Y-11.29 E.00615 M106 S255 G1 F2400 G1 X31.39 Y-11.29 E.02581 G1 F12000 G1 X33.71 Y-11.29 E.07129 G1 X34.34 Y-11.29 E.01936 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X31.39 Y-10.11 E.07129 G1 F2400 G1 X30.55 Y-10.11 E.02581 G1 F600 G1 X30.35 Y-10.11 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X29.25 Y-10.11 E.03649 G1 X8.85 Y-10.11 E.67671 G1 X7.75 Y-10.11 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y-10.11 E.00615 M106 S255 G1 F2400 G1 X6.71 Y-10.11 E.02581 G1 F12000 G1 X4.95 Y-10.11 E.05408 G1 X4.38 Y-10.11 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z94.2 F30000 G1 X33.55 Y38.949 Z94.2 G1 Z93.8 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F12000 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:94 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;94 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;94 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z94.4 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z94.4 G1 Z94 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 M73 P93 R7 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z94.4 F30000 G1 X33.55 Y38.949 Z94.4 G1 Z94 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:94.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;94.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;94.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z94.6 I1.04 J-.633 P1 F30000 G1 X3.498 Y-10.448 Z94.6 G1 Z94.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5885 G1 X3.498 Y40.648 E1.69494 G1 X3.102 Y40.648 E.01313 G1 X3.102 Y-10.448 E1.69494 G1 X3.458 Y-10.448 E.0118 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y-10.545 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5885 G1 X3.905 Y40.745 E1.70138 G1 X33.195 Y40.745 E.9716 G1 X33.195 Y38.745 E.06634 G1 X33.905 Y38.745 E.02355 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.945 Y-10.545 E.99383 G1 X4.34 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5885 G1 X4.34 Y40.31 E1.54927 G1 X32.76 Y40.31 E.87327 G1 X32.76 Y38.31 E.06145 G1 X34.34 Y38.31 E.04855 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.38 Y-10.11 E.92059 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.378 Y-8.11 ;WIPE_END G1 X8.4 Y-1.623 Z94.6 F30000 G1 X33.55 Y38.949 Z94.6 G1 Z94.2 G1 E.8 F1800 ;TYPE:Gap infill ;WIDTH:0.345842 G1 F5885 G1 X33.55 Y40.851 E.04697 ;LAYER_CHANGE ;Z:94.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;94.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X33.55 Y38.949 ;WIPE_END ;AFTER_LAYER_CHANGE ;94.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z94.8 I-.008 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z94.8 G1 Z94.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F2400 G1 X4.55 Y39.152 E.0349 G1 F600 G1 X4.75 Y39.152 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X5.85 Y39.152 E.03649 G1 X31.25 Y39.152 E.84256 G1 X32.35 Y39.152 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X32.55 Y39.152 E.00663 M106 S255 G1 F2400 G1 X33.498 Y39.152 E.03145 G1 F18000 G1 X33.498 Y40.648 E.04963 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69495 G1 X3.498 Y-10.448 E.01314 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F2400 G1 X4.55 Y38.745 E.0214 G1 F600 G1 X4.75 Y38.745 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X5.85 Y38.745 E.03649 G1 X31.25 Y38.745 E.84256 G1 X32.35 Y38.745 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X32.55 Y38.745 E.00663 M106 S255 G1 F2400 G1 X33.905 Y38.745 E.04495 G1 F18000 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F2400 G1 X4.55 Y38.31 E.00645 G1 F600 G1 X4.75 Y38.31 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X5.85 Y38.31 E.03649 G1 X31.25 Y38.31 E.84256 G1 X32.35 Y38.31 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X32.55 Y38.31 E.00615 M106 S255 G1 F2400 G1 X34.34 Y38.31 E.055 G1 F12000 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.883 Y-10.11 E.88577 G1 X4.34 Y-10.11 E.01668 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y37.64 E1.45054 G1 X4.34 Y38.27 E.01936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.75 Y38.31 G1 X6.338 Y38.31 ;WIPE_END G1 X3.128 Y38.707 Z94.8 F30000 G1 Z94.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X3.302 Y38.707 E.00533 G1 X3.298 Y39.461 E.02317 G1 X33.302 Y39.461 E.92193 G1 X33.302 Y39.838 E.01159 G1 X3.298 Y39.838 E.92193 G1 X3.298 Y40.215 E.01159 G1 X33.472 Y40.215 E.92715 ;LAYER_CHANGE ;Z:94.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;94.6 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X31.472 Y40.215 ;WIPE_END ;AFTER_LAYER_CHANGE ;94.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z95 I.046 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z95 G1 Z94.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7367 M106 S255 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7367 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7367 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G17 G3 Z95 I-.058 J1.216 P1 F30000 G1 X33.106 Y39.544 Z95 G1 Z94.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7367 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F7367 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:94.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;94.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;94.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z95.2 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z95.2 G1 Z94.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7348 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7348 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7348 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.964 Y38.635 Z95.2 F30000 G1 X33.106 Y39.544 Z95.2 G1 Z94.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7348 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F7348 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:95 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;95 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;95 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z95.4 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z95.4 G1 Z95 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7006 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7006 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 M73 P93 R6 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7006 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.295 Y40.402 Z95.4 F30000 G1 Z95 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F7006 G1 X4.489 Y40.402 E.02672 G1 X4.248 Y40.161 E.01131 G1 X4.248 Y39.679 E.01599 G1 X3.686 Y39.81 E.01915 G1 X3.518 Y39.363 E.01584 G1 X3.313 Y39.363 E.00679 G1 X3.313 Y40.031 E.02217 G1 X3.686 Y39.944 E.01271 G1 X3.872 Y40.437 E.01747 G1 X5.5 Y40.437 E.05401 G1 X32.437 Y39.566 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.46413 G1 F7006 G1 X4.663 Y39.566 E.95332 G1 X4.663 Y39.987 E.01446 G1 X32.437 Y39.987 E.95332 G1 X32.437 Y39.606 E.01308 ;LAYER_CHANGE ;Z:95.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;95.2 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X32.437 Y39.987 G1 X30.819 Y39.987 ;WIPE_END ;AFTER_LAYER_CHANGE ;95.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z95.6 I.037 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z95.6 G1 Z95.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7054 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7054 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7054 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X9.46 Y39.544 Z95.6 F30000 G1 Z95.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7054 G1 X3.494 Y39.544 E.1833 G1 X3.494 Y40.256 E.02187 G1 X9.456 Y40.256 E.18318 G1 X9.459 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F7054 G1 X9.064 Y39.9 E.14216 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.377 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F7054 G1 X13.005 Y40.437 E.05401 G3 X13.902 Y40.437 I.448 J.947 E.03073 G1 X18.246 Y40.437 E.14413 G3 X19.143 Y40.437 I.448 J.947 E.03073 G1 X23.488 Y40.437 E.14413 G3 X24.384 Y40.437 I.448 J.947 E.03073 G1 X26.771 Y40.437 E.07917 G1 X26.771 Y39.363 E.03562 G3 X24.979 Y39.364 I-.902 J-10.625 E.0595 G1 X20.353 Y39.363 E.15345 G3 X19.738 Y39.364 I-.309 J-.762 E.02093 G1 X15.112 Y39.363 E.15345 G3 X14.496 Y39.364 I-.309 J-.762 E.02093 G1 X12.867 Y39.363 E.05406 G1 X27.144 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7054 G1 X27.14 Y40.256 E.02187 G1 X33.106 Y40.256 E.1833 G1 X33.106 Y39.544 E.02187 G1 X27.184 Y39.544 E.18195 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.496 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7054 G1 X32.71 Y39.9 E.14216 ;LAYER_CHANGE ;Z:95.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;95.4 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;95.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z95.8 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z95.8 G1 Z95.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6810 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6810 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6810 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z95.8 F30000 G1 Z95.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6810 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F6810 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6810 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6810 G1 X32.71 Y39.9 E.17054 ;LAYER_CHANGE ;Z:95.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;95.6 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;95.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z96 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z96 G1 Z95.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6810 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6810 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6810 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P94 R6 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z96 F30000 G1 Z95.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6810 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F6810 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6810 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6810 G1 X32.71 Y39.9 E.17054 ;LAYER_CHANGE ;Z:95.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;95.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;95.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z96.2 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z96.2 G1 Z95.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6810 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6810 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6810 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.5 Y39.544 Z96.2 F30000 G1 Z95.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6810 G1 X3.494 Y39.544 E.21528 G1 X3.494 Y40.256 E.02187 G1 X10.5 Y40.256 E.21528 G1 X10.5 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F6810 G1 X10.104 Y39.9 E.17054 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.1 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.419999 G1 F6810 G1 X26.1 Y40.256 E.02187 G1 X33.106 Y40.256 E.21528 G1 X33.106 Y39.544 E.02187 G1 X26.14 Y39.544 E.21405 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.456 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6810 G1 X32.71 Y39.9 E.17054 ;LAYER_CHANGE ;Z:96 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;96 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;96 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z96.4 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z96.4 G1 Z96 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7083 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7083 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7083 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.67 Y39.796 Z96.4 F30000 G1 Z96 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.429843 G1 F7083 G1 X9.844 Y40.622 E.03682 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.297 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X10.67 Y39.249 E.06122 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.193 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X8.75 Y40.622 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.203 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X9.646 Y39.178 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.099 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X7.655 Y40.622 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.108 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X8.551 Y39.178 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.004 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X6.561 Y40.622 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.014 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X7.457 Y39.178 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.91 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X5.467 Y40.622 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.919 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X6.363 Y39.178 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.815 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X4.372 Y40.622 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.825 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X5.268 Y39.178 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.721 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X3.278 Y40.622 E.06435 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y40.224 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X4.174 Y39.178 E.04662 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.627 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X3.128 Y39.677 E.02222 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y39.129 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X3.472 Y38.786 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y38.239 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X3.128 Y38.582 E.0153 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.472 Y38.239 ;WIPE_END G1 X11.094 Y38.639 Z96.4 F30000 G1 X33.472 Y39.814 Z96.4 G1 Z96 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;WIDTH:0.441442 G1 F7083 G1 X32.664 Y40.622 E.0371 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.1 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X33.472 Y39.25 E.06298 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.98 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X31.537 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.973 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X32.416 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.853 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X30.409 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.846 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X31.289 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.725 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X29.282 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.719 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X30.162 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.598 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X28.155 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.591 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X29.035 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.471 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X27.028 Y40.622 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.464 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X27.907 Y39.178 E.06628 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.344 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X25.931 Y40.591 E.06488 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.93 Y40.029 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7083 G1 X26.78 Y39.178 E.03905 ;LAYER_CHANGE ;Z:96.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;96.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X25.93 Y40.029 ;WIPE_END ;AFTER_LAYER_CHANGE ;96.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z96.6 I.088 J-1.214 P1 F30000 G1 X3.498 Y38.394 Z96.6 G1 Z96.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6947 G1 X3.102 Y38.394 E.01313 G1 X3.102 Y-10.448 E1.62018 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.354 E1.61885 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6947 G1 X3.905 Y38.801 E.00186 G1 X2.695 Y38.801 E.04014 G1 X2.695 Y-10.855 E1.64718 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y38.801 G1 X2.695 Y38.801 G1 X2.695 Y38.107 ;WIPE_END G1 X9.962 Y40.442 Z96.6 F30000 G1 X10.602 Y40.648 Z96.6 G1 Z96.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6947 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6947 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z96.6 F30000 G1 Z96.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6947 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y39.236 E.02846 G1 X26.84 Y39.236 E.23045 G1 X26.84 Y40.564 E.0408 G1 X34.34 Y40.564 E.23045 G1 X34.34 Y41.49 E.02846 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y40.564 E.02846 G1 X9.76 Y40.564 E.23045 G1 X9.76 Y39.236 E.0408 G1 X2.26 Y39.236 E.23045 G1 X2.26 Y-11.29 E1.55253 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.123 Y38.773 F30000 ;TYPE:Gap infill ;WIDTH:0.533988 G1 F6947 G1 X9.977 Y38.773 E.23429 G1 X9.977 Y41.027 F30000 ;WIDTH:0.533984 G1 F6947 G1 X2.478 Y41.027 E.30012 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.478 Y41.027 ;WIPE_END G1 X12.081 Y40.364 Z96.6 F30000 G1 X23.562 Y39.363 Z96.6 G1 Z96.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6947 G1 X21.933 Y39.363 E.05401 G1 X21.703 Y39.52 E.00924 G3 X20.866 Y39.363 I-.174 J-1.386 E.0287 G1 X16.692 Y39.363 E.13846 G1 X16.462 Y39.52 E.00924 G3 X15.625 Y39.363 I-.174 J-1.386 E.0287 G1 X11.451 Y39.363 E.13846 G3 X10.813 Y39.497 I-.448 J-.548 E.02246 G1 X10.813 Y40.437 E.03117 G1 X11.578 Y40.437 E.02537 G1 X11.876 Y40.234 E.01195 G3 X12.859 Y40.436 I.176 J1.637 E.03382 G1 X16.819 Y40.437 E.13139 G1 X17.117 Y40.234 E.01195 G3 X18.1 Y40.436 I.176 J1.637 E.03382 G1 X22.061 Y40.437 E.13139 G1 X22.358 Y40.234 E.01195 G3 X23.341 Y40.436 I.176 J1.637 E.03382 G1 X24.97 Y40.437 E.05404 G1 X26.623 Y41.027 F30000 ;TYPE:Gap infill ;WIDTH:0.533984 G1 F6947 G1 X34.123 Y41.027 E.30012 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y41.027 ;WIPE_END G1 X34.123 Y38.773 Z96.6 F30000 G1 Z96.2 G1 E.8 F1800 ;WIDTH:0.533988 G1 F6947 G1 X26.623 Y38.773 E.30012 ;LAYER_CHANGE ;Z:96.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;96.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.623 Y38.773 ;WIPE_END ;AFTER_LAYER_CHANGE ;96.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z96.8 I.033 J-1.217 P1 F30000 G1 X3.471 Y38.095 Z96.8 G1 Z96.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6860 G1 X3.102 Y38.095 E.01224 G1 X3.102 Y-10.448 E1.61027 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.082 E1.60984 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.502 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6860 G1 X2.695 Y38.502 E.04014 G1 X2.695 Y-10.855 E1.63728 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.462 E1.62567 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.502 G1 X2.695 Y37.713 ;WIPE_END G1 X9.85 Y40.369 Z96.8 F30000 G1 X10.602 Y40.648 Z96.8 G1 Z96.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6860 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6860 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z96.8 F30000 G1 Z96.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6860 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.937 E.01928 G1 X26.84 Y38.937 E.23045 G1 X26.84 Y40.863 E.05915 G1 X34.34 Y40.863 E.23045 G1 X34.34 Y41.49 E.01928 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y40.863 E.01928 G1 X9.76 Y40.863 E.23045 G1 X9.76 Y38.937 E.05915 G1 X2.26 Y38.937 E.23045 G1 X2.26 Y-11.29 E1.54335 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.123 Y38.624 F30000 ;TYPE:Gap infill ;WIDTH:0.235396 G1 F6860 G1 X9.977 Y38.624 E.09183 G1 X9.977 Y41.176 F30000 G1 F6860 G1 X2.478 Y41.176 E.11763 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.478 Y41.176 ;WIPE_END G1 X12.08 Y40.497 Z96.8 F30000 G1 X12.758 Y40.437 Z96.8 G1 Z96.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6860 G1 X11.218 Y40.437 E.05109 G2 X10.813 Y39.749 I-.739 J-.029 E.02798 G1 X10.813 Y39.363 E.01279 G1 X11.877 Y39.363 E.0353 G1 X11.87 Y39.549 E.00618 G1 X12.082 Y39.877 E.01293 G1 X12.961 Y40.437 E.03459 G1 X16.459 Y40.437 E.11602 G2 X16.256 Y39.877 I-.503 J-.134 E.02102 G1 X15.449 Y39.363 E.03175 G1 X17.118 Y39.363 E.05539 G1 X17.112 Y39.549 E.00618 G1 X17.323 Y39.877 E.01293 G1 X18.203 Y40.437 E.03459 G1 X21.7 Y40.437 E.11602 G2 X21.498 Y39.877 I-.503 J-.134 E.02102 G1 X20.69 Y39.363 E.03175 G1 X22.36 Y39.363 E.05539 G1 X22.353 Y39.549 E.00618 G1 X22.564 Y39.877 E.01293 G1 X23.444 Y40.437 E.03459 G1 X25.072 Y40.437 E.05401 G1 X26.623 Y41.176 F30000 ;TYPE:Gap infill ;WIDTH:0.235396 G1 F6860 G1 X34.123 Y41.176 E.11763 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y41.176 ;WIPE_END G1 X34.123 Y38.624 Z96.8 F30000 G1 Z96.4 G1 E.8 F1800 G1 F6860 G1 X26.623 Y38.624 E.11763 ;LAYER_CHANGE ;Z:96.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;96.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.623 Y38.624 ;WIPE_END ;AFTER_LAYER_CHANGE ;96.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z97 I.034 J-1.217 P1 F30000 G1 X3.416 Y37.929 Z97 G1 Z96.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6407 G1 X3.102 Y37.929 E.0104 G1 X3.102 Y-10.448 E1.60474 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y37.929 E1.60474 G1 X3.456 Y37.929 E.0014 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.336 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6407 G1 X2.695 Y38.336 E.04014 G1 X2.695 Y-10.855 E1.63175 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.296 E1.62014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.336 G1 X2.695 Y37.546 ;WIPE_END G1 X9.8 Y40.333 Z97 F30000 G1 X10.602 Y40.648 Z97 G1 Z96.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6407 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 M73 P94 R5 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6407 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z97 F30000 G1 Z96.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6407 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.771 E.01416 G1 X26.84 Y38.771 E.23045 G1 X26.84 Y41.029 E.0694 G1 X34.34 Y41.029 E.23045 G1 X34.34 Y41.49 E.01416 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.029 E.01416 G1 X9.76 Y41.029 E.23045 G1 X9.76 Y38.771 E.0694 G1 X2.26 Y38.771 E.23045 G1 X2.26 Y-11.29 E1.53823 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X12.61 Y40.437 Z97 F30000 G1 Z96.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6407 G1 X10.982 Y40.437 E.05401 G2 X10.813 Y40.084 I-.506 J.025 E.0133 G1 X10.813 Y39.363 E.02393 G1 X12.129 Y39.363 E.04364 G2 X13.084 Y40.437 I2.338 J-1.118 E.04832 G1 X16.223 Y40.437 E.10411 G2 X15.305 Y39.363 I-2.19 J.942 E.04757 G1 X17.37 Y39.363 E.0685 G2 X18.326 Y40.437 I2.338 J-1.118 E.04832 G1 X21.464 Y40.437 E.10411 G2 X20.546 Y39.363 I-2.19 J.942 E.04757 G1 X22.611 Y39.363 E.0685 G2 X23.567 Y40.437 I2.338 J-1.118 E.04832 G1 X25.195 Y40.437 E.05401 ;LAYER_CHANGE ;Z:96.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;96.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X23.567 Y40.437 G1 X23.289 Y40.19 ;WIPE_END ;AFTER_LAYER_CHANGE ;96.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z97.2 I.144 J-1.208 P1 F30000 G1 X3.368 Y37.825 Z97.2 G1 Z96.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6370 G1 X3.102 Y37.825 E.00882 G1 X3.102 Y-10.448 E1.60129 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y37.825 E1.60129 G1 X3.408 Y37.825 E.00298 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.898 Y38.232 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6370 G1 X2.695 Y38.232 E.03991 G1 X2.695 Y-10.855 E1.62829 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.199 E1.61692 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.232 G1 X2.695 Y37.442 ;WIPE_END G1 X9.768 Y40.31 Z97.2 F30000 G1 X10.602 Y40.648 Z97.2 G1 Z96.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6370 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6370 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z97.2 F30000 G1 Z96.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6370 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.667 E.01096 G1 X26.84 Y38.667 E.23045 G1 X26.84 Y41.133 E.0758 G1 X34.34 Y41.133 E.23045 G1 X34.34 Y41.49 E.01096 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.133 E.01096 G1 X9.76 Y41.133 E.23045 G1 X9.76 Y38.667 E.0758 G1 X2.26 Y38.667 E.23045 G1 X2.26 Y-11.29 E1.53503 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X10.813 Y39.493 Z97.2 F30000 G1 Z96.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6370 G1 X10.813 Y39.363 E.0043 G1 X12.312 Y39.363 E.04972 G2 X13.198 Y40.437 I4.277 J-2.626 E.04633 G1 X16.049 Y40.437 E.09457 G2 X15.182 Y39.363 I-3.911 J2.271 E.04596 G1 X17.553 Y39.363 E.07867 G2 X18.439 Y40.437 I4.277 J-2.626 E.04633 G1 X21.29 Y40.437 E.09457 G2 X20.423 Y39.363 I-3.911 J2.271 E.04596 G1 X22.795 Y39.363 E.07867 G2 X23.68 Y40.437 I4.277 J-2.626 E.04633 G1 X25.309 Y40.437 E.05401 ;LAYER_CHANGE ;Z:97 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;97 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X23.68 Y40.437 G1 X23.433 Y40.16 ;WIPE_END ;AFTER_LAYER_CHANGE ;97 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z97.4 I.144 J-1.208 P1 F30000 G1 X3.339 Y37.769 Z97.4 G1 Z97 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6401 G1 X3.102 Y37.769 E.00786 G1 X3.102 Y-10.448 E1.59943 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y37.769 E1.59943 G1 X3.379 Y37.769 E.00395 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.885 Y38.176 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6401 G1 X2.695 Y38.176 E.03947 G1 X2.695 Y-10.855 E1.62644 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.156 E1.6155 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.176 G1 X2.695 Y37.386 ;WIPE_END G1 X9.751 Y40.297 Z97.4 F30000 G1 X10.602 Y40.648 Z97.4 G1 Z97 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6401 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6401 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z97.4 F30000 G1 Z97 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6401 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.611 E.00924 G1 X26.84 Y38.611 E.23045 G1 X26.84 Y41.189 E.07924 G1 X34.34 Y41.189 E.23045 G1 X34.34 Y41.49 E.00924 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.189 E.00924 G1 X9.76 Y41.189 E.23045 G1 X9.76 Y38.611 E.07924 G1 X2.26 Y38.611 E.23045 G1 X2.26 Y-11.29 E1.53331 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X11.692 Y40.437 Z97.4 F30000 G1 Z97 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6401 G1 X13.321 Y40.437 E.05401 G2 X12.48 Y39.363 I-19.124 J14.112 E.04525 G1 X15.052 Y39.363 E.08534 G2 X15.895 Y40.437 I19.125 J-14.149 E.04529 G1 X18.562 Y40.437 E.08845 G2 X17.721 Y39.363 I-19.124 J14.112 E.04525 G1 X20.294 Y39.363 E.08534 G2 X21.137 Y40.437 I19.125 J-14.149 E.04529 G1 X23.803 Y40.437 E.08845 G2 X22.962 Y39.363 I-19.124 J14.112 E.04525 G1 X25.535 Y39.363 E.08534 G1 X25.787 Y39.694 E.01381 G1 X25.787 Y40.437 E.02463 G1 X24.901 Y40.437 E.02938 ;LAYER_CHANGE ;Z:97.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;97.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X25.787 Y40.437 G1 X25.787 Y39.694 G1 X25.562 Y39.399 ;WIPE_END ;AFTER_LAYER_CHANGE ;97.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z97.6 I.09 J-1.214 P1 F30000 G1 X3.328 Y37.748 Z97.6 G1 Z97.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6402 G1 X3.102 Y37.748 E.00748 G1 X3.102 Y-10.448 E1.59874 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y37.748 E1.59874 G1 X3.368 Y37.748 E.00432 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.878 Y38.155 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6402 G1 X2.695 Y38.155 E.03925 G1 X2.695 Y-10.855 E1.62575 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.142 E1.61503 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.155 G1 X2.695 Y37.365 ;WIPE_END G1 X9.744 Y40.292 Z97.6 F30000 G1 X10.602 Y40.648 Z97.6 G1 Z97.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6402 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6402 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z97.6 F30000 G1 Z97.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6402 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.59 E.0086 G1 X26.84 Y38.59 E.23045 G1 X26.84 Y41.21 E.08051 G1 X34.34 Y41.21 E.23045 G1 X34.34 Y41.49 E.0086 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.21 E.0086 G1 X9.76 Y41.21 E.23045 G1 X9.76 Y38.59 E.08051 G1 X2.26 Y38.59 E.23045 G1 X2.26 Y-11.29 E1.53267 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X11.857 Y40.437 Z97.6 F30000 G1 Z97.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6402 G1 X13.485 Y40.437 E.05401 G2 X12.605 Y39.363 I-2.952 J1.523 E.04641 G1 X14.872 Y39.363 E.07521 G2 X15.777 Y40.437 I3.173 J-1.757 E.04689 G1 X18.727 Y40.437 E.09784 G2 X17.846 Y39.363 I-2.952 J1.523 E.0464 G1 X20.113 Y39.363 E.07521 G2 X21.019 Y40.437 I3.173 J-1.757 E.04689 G1 X23.968 Y40.437 E.09784 G2 X23.088 Y39.363 I-2.952 J1.523 E.0464 G1 X25.355 Y39.363 E.07521 G2 X25.787 Y39.95 I1.97 J-.998 E.02429 G1 X25.787 Y40.437 E.01615 G1 X24.645 Y40.437 E.03786 ;LAYER_CHANGE ;Z:97.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;97.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X25.787 Y40.437 G1 X25.787 Y39.95 G1 X25.542 Y39.671 ;WIPE_END ;AFTER_LAYER_CHANGE ;97.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z97.8 I.104 J-1.213 P1 F30000 G1 X3.339 Y37.769 Z97.8 G1 Z97.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6410 G1 X3.102 Y37.769 E.00786 G1 X3.102 Y-10.448 E1.59943 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y37.769 E1.59943 G1 X3.379 Y37.769 E.00395 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.885 Y38.176 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6410 G1 X2.695 Y38.176 E.03947 G1 X2.695 Y-10.855 E1.62644 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.156 E1.6155 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.176 G1 X2.695 Y37.386 ;WIPE_END G1 X9.751 Y40.297 Z97.8 F30000 G1 X10.602 Y40.648 Z97.8 G1 Z97.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6410 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6410 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 M73 P95 R5 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z97.8 F30000 G1 Z97.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6410 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.611 E.00924 G1 X26.84 Y38.611 E.23045 G1 X26.84 Y41.189 E.07924 G1 X34.34 Y41.189 E.23045 G1 X34.34 Y41.49 E.00924 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.189 E.00924 G1 X9.76 Y41.189 E.23045 G1 X9.76 Y38.611 E.07924 G1 X2.26 Y38.611 E.23045 G1 X2.26 Y-11.29 E1.53331 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X12.049 Y40.437 Z97.8 F30000 G1 Z97.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6410 G1 X13.678 Y40.437 E.05401 G1 X13.629 Y40.205 E.00787 G2 X12.731 Y39.363 I-2.29 J1.544 E.04118 G1 X14.67 Y39.363 E.06431 G1 X14.708 Y39.549 E.00631 G2 X15.664 Y40.437 I2.419 J-1.646 E.04363 G1 X18.919 Y40.437 E.10797 G1 X18.871 Y40.205 E.00787 G2 X17.972 Y39.363 I-2.29 J1.544 E.04118 G1 X19.911 Y39.363 E.06431 G1 X19.95 Y39.549 E.00631 G2 X20.905 Y40.437 I2.419 J-1.646 E.04363 G1 X22.533 Y40.437 E.05401 G1 X21.585 Y39.363 F30000 G1 F6410 G1 X23.214 Y39.363 E.05401 G1 X23.853 Y39.877 E.02721 G3 X24.16 Y40.437 I-.404 J.586 E.02196 G1 X25.787 Y40.437 E.05396 G1 X25.787 Y40.148 E.00959 G3 X25.152 Y39.363 I.685 J-1.203 E.03427 G1 X23.524 Y39.363 E.05401 ;LAYER_CHANGE ;Z:97.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;97.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X25.152 Y39.363 G1 X25.191 Y39.549 G1 X25.303 Y39.692 ;WIPE_END ;AFTER_LAYER_CHANGE ;97.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z98 I.103 J-1.213 P1 F30000 G1 X3.368 Y37.825 Z98 G1 Z97.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6425 G1 X3.102 Y37.825 E.00882 G1 X3.102 Y-10.448 E1.60129 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y37.825 E1.60129 G1 X3.408 Y37.825 E.00298 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.898 Y38.232 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X2.695 Y38.232 E.03991 G1 X2.695 Y-10.855 E1.62829 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.199 E1.61692 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.232 G1 X2.695 Y37.442 ;WIPE_END G1 X9.768 Y40.31 Z98 F30000 G1 X10.602 Y40.648 Z98 G1 Z97.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6425 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z98 F30000 G1 Z97.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6425 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.667 E.01096 G1 X26.84 Y38.667 E.23045 G1 X26.84 Y41.133 E.0758 G1 X34.34 Y41.133 E.23045 G1 X34.34 Y41.49 E.01096 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.133 E.01096 G1 X9.76 Y41.133 E.23045 G1 X9.76 Y38.667 E.0758 G1 X2.26 Y38.667 E.23045 G1 X2.26 Y-11.29 E1.53503 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X11.249 Y39.363 Z98 F30000 G1 Z97.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6425 G1 X12.877 Y39.363 E.05401 G2 X13.917 Y39.877 I3.151 J-5.068 E.03855 G3 X13.95 Y40.437 I-.457 J.307 E.01952 G1 X15.54 Y40.437 E.05277 G2 X14.421 Y39.877 I-3.426 J5.451 E.04159 G3 X14.376 Y39.363 I.412 J-.295 E.01795 G1 X18.118 Y39.363 E.12413 G2 X19.158 Y39.877 I3.151 J-5.068 E.03855 G3 X19.191 Y40.437 I-.457 J.307 E.01952 G1 X20.782 Y40.437 E.05277 G2 X19.662 Y39.877 I-3.426 J5.451 E.04159 G3 X19.618 Y39.363 I.412 J-.295 E.01795 G1 X23.359 Y39.363 E.12413 G2 X24.4 Y39.877 I3.151 J-5.068 E.03855 G3 X24.432 Y40.437 I-.457 J.307 E.01952 G1 X25.787 Y40.437 E.04494 G1 X25.787 Y40.3 E.00453 G2 X24.903 Y39.877 I-2.608 J4.312 E.03255 G3 X24.859 Y39.363 I.412 J-.295 E.01795 G1 X25.787 Y39.363 E.03079 G1 X25.787 Y40.063 E.02323 ;LAYER_CHANGE ;Z:97.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;97.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X25.787 Y39.363 G1 X24.859 Y39.363 G1 X24.81 Y39.549 G1 X24.859 Y39.722 ;WIPE_END ;AFTER_LAYER_CHANGE ;97.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z98.2 I.101 J-1.213 P1 F30000 G1 X3.416 Y37.929 Z98.2 G1 Z97.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6458 G1 X3.102 Y37.929 E.0104 G1 X3.102 Y-10.448 E1.60474 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y37.929 E1.60474 G1 X3.456 Y37.929 E.0014 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.336 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6458 G1 X2.695 Y38.336 E.04014 G1 X2.695 Y-10.855 E1.63175 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.296 E1.62014 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.336 G1 X2.695 Y37.546 ;WIPE_END G1 X9.8 Y40.333 Z98.2 F30000 G1 X10.602 Y40.648 Z98.2 G1 Z97.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6458 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6458 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z98.2 F30000 G1 Z97.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6458 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y38.771 E.01416 G1 X26.84 Y38.771 E.23045 G1 X26.84 Y41.029 E.0694 G1 X34.34 Y41.029 E.23045 G1 X34.34 Y41.49 E.01416 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y41.029 E.01416 G1 X9.76 Y41.029 E.23045 G1 X9.76 Y38.771 E.0694 G1 X2.26 Y38.771 E.23045 G1 X2.26 Y-11.29 E1.53823 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X11.534 Y39.363 Z98.2 F30000 G1 Z97.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6458 G1 X13.163 Y39.363 E.05401 G2 X13.884 Y39.363 I.361 J-.907 E.02451 G1 X18.404 Y39.363 E.14993 G2 X19.125 Y39.363 I.361 J-.907 E.02451 G1 X23.645 Y39.363 E.14993 G2 X24.367 Y39.363 I.361 J-.907 E.02451 G1 X25.787 Y39.363 E.04711 G1 X25.787 Y40.421 E.03508 G2 X24.876 Y40.437 I-.441 J.838 E.03152 G1 X20.616 Y40.437 E.14133 G2 X19.738 Y40.358 I-.54 J1.084 E.02993 G1 X19.635 Y40.437 E.0043 G1 X15.374 Y40.437 E.14133 G2 X14.496 Y40.358 I-.54 J1.084 E.02993 G1 X14.394 Y40.437 E.0043 G1 X12.765 Y40.437 E.05401 ;LAYER_CHANGE ;Z:98 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;98 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X14.394 Y40.437 G1 X14.496 Y40.358 G1 X14.736 Y40.323 ;WIPE_END ;AFTER_LAYER_CHANGE ;98 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z98.4 I.236 J-1.194 P1 F30000 G1 X3.471 Y38.095 Z98.4 G1 Z98 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6825 G1 X3.102 Y38.095 E.01224 G1 X3.102 Y-10.448 E1.61027 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.082 E1.60984 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.502 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6825 G1 X2.695 Y38.502 E.04014 G1 X2.695 Y-10.855 E1.63728 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.462 E1.62567 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X2.695 Y38.502 G1 X2.695 Y37.713 ;WIPE_END G1 X9.85 Y40.369 Z98.4 F30000 G1 X10.602 Y40.648 Z98.4 G1 Z98 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6825 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6825 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G1 X4.34 Y38.31 Z98.4 F30000 G1 Z98 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6825 G1 X4.883 Y38.31 E.01668 G1 X33.71 Y38.31 E.88577 G1 X34.34 Y38.31 E.01936 G1 F6360 G1 X34.34 Y38.937 E.01927 G1 X33.543 Y38.937 E.02449 G1 X27.466 Y38.937 E.18673 G1 X26.84 Y38.937 E.01924 G1 F6825 G1 X26.84 Y40.863 E.05918 G1 F6360 G1 X27.466 Y40.863 E.01924 G1 X33.543 Y40.863 E.18673 G1 X34.34 Y40.863 E.02449 G1 X34.34 Y41.49 E.01927 G1 F6825 G1 X2.26 Y41.49 E.98573 G1 F6360 G1 X2.26 Y40.863 E.01927 G1 X3.057 Y40.863 E.02449 G1 X9.134 Y40.863 E.18673 G1 X9.76 Y40.863 E.01924 G1 F6825 G1 X9.76 Y38.937 E.05918 G1 F6360 G1 X9.134 Y38.937 E.01924 G1 X3.057 Y38.937 E.18673 G1 X2.26 Y38.937 E.02449 G1 X2.26 Y38.141 E.02446 G1 F6825 G1 X2.26 Y-10.66 E1.49952 G1 X2.26 Y-11.29 E.01936 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.883 Y-10.11 E.88577 G1 X4.34 Y-10.11 E.01668 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y37.7 E1.45238 G1 X4.34 Y38.27 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.123 Y38.624 F30000 ;TYPE:Gap infill ;WIDTH:0.235404 G1 F6825 G1 X9.977 Y38.624 E.09184 G1 X9.977 Y41.176 F30000 G1 F6825 G1 X2.478 Y41.176 E.11764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.478 Y41.176 ;WIPE_END G1 X12.061 Y40.313 Z98.4 F30000 G1 X15.14 Y39.963 Z98.4 G1 Z98 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.364134 G1 F6825 G1 X10.966 Y39.963 E.10925 G1 X10.966 Y40.284 E.00841 G1 X15.187 Y40.284 E.11049 G1 X15.187 Y40.01 E.00717 G1 X15.168 Y39.991 E.0007 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.623 Y41.176 F30000 ;TYPE:Gap infill ;WIDTH:0.235404 G1 F6825 G1 X34.123 Y41.176 E.11764 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y41.176 ;WIPE_END G1 X34.123 Y38.624 Z98.4 F30000 G1 Z98 G1 E.8 F1800 G1 F6825 G1 X26.623 Y38.624 E.11764 ;LAYER_CHANGE ;Z:98.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;98.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.623 Y38.624 ;WIPE_END ;AFTER_LAYER_CHANGE ;98.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z98.6 I.011 J-1.217 P1 F30000 G1 X3.498 Y38.394 Z98.6 G1 Z98.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F9453 G1 X3.102 Y38.394 E.01313 G1 X3.102 Y-10.448 E1.62018 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y38.354 E1.61885 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9453 G1 X3.905 Y38.801 E.00186 G1 X2.695 Y38.801 E.04014 G1 X2.695 Y-10.855 E1.64718 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.905 Y38.801 G1 X2.695 Y38.801 G1 X2.695 Y38.107 ;WIPE_END G17 G3 Z98.6 I-.372 J1.159 P1 F30000 G1 X10.602 Y40.648 Z98.6 G1 Z98.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9453 G1 X10.602 Y39.152 E.04962 G1 X25.998 Y39.152 E.51071 G1 X25.998 Y40.648 E.04962 G1 X10.642 Y40.648 E.50938 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.195 Y41.055 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F9453 G1 X10.195 Y38.745 E.07663 G1 X26.405 Y38.745 E.53772 G1 X26.405 Y41.055 E.07663 G1 X10.235 Y41.055 E.53639 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X10.2 Y39.055 ;WIPE_END G17 G3 Z98.6 I.154 J-1.207 P1 F30000 M73 P95 R4 G1 X4.34 Y38.31 Z98.6 G1 Z98.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F9453 G1 X4.883 Y38.31 E.01668 G1 X33.71 Y38.31 E.88577 G1 X34.34 Y38.31 E.01936 G1 F1380 G1 X34.34 Y39.236 E.02845 G1 X33.411 Y39.236 E.02855 G1 X27.89 Y39.236 E.16964 G1 X27.05 Y39.236 E.02581 M106 S255 G1 F2400 G1 X26.84 Y39.236 E.00645 G1 F9453 G1 X26.84 Y40.564 E.04081 G1 F2400 G1 X27.05 Y40.564 E.00645 G1 F1380 G1 X27.89 Y40.564 E.02581 G1 X33.411 Y40.564 E.16964 G1 X34.34 Y40.564 E.02855 M106 S255 G1 X34.34 Y41.49 E.02845 G1 F9453 G1 X2.26 Y41.49 E.98573 G1 F1380 G1 X2.26 Y40.564 E.02845 G1 X3.189 Y40.564 E.02855 G1 X8.71 Y40.564 E.16964 G1 X9.55 Y40.564 E.02581 M106 S255 G1 F2400 G1 X9.76 Y40.564 E.00645 G1 F9453 G1 X9.76 Y39.236 E.04081 G1 F2400 G1 X9.55 Y39.236 E.00645 G1 F1380 G1 X8.71 Y39.236 E.02581 G1 X3.189 Y39.236 E.16964 G1 X2.26 Y39.236 E.02855 M106 S255 G1 X2.26 Y38.307 E.02855 G1 F9453 G1 X2.26 Y-10.66 E1.50462 G1 X2.26 Y-11.29 E.01936 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.883 Y-10.11 E.88577 G1 X4.34 Y-10.11 E.01668 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y37.7 E1.45238 G1 X4.34 Y38.27 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.123 Y38.773 F30000 ;TYPE:Gap infill ;WIDTH:0.533988 G1 F9453 G1 X9.977 Y38.773 E.23429 G1 X9.977 Y41.027 F30000 ;WIDTH:0.533984 G1 F9453 G1 X2.478 Y41.027 E.30012 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.478 Y41.027 ;WIPE_END G1 X12.091 Y40.493 Z98.6 F30000 G1 X25.606 Y39.544 Z98.6 G1 Z98.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F9453 G1 X10.994 Y39.544 E.44898 G1 X10.994 Y40.256 E.02187 G1 X25.606 Y40.256 E.44898 G1 X25.606 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.35 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F9453 G1 X25.21 Y39.9 E.37792 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.623 Y41.027 F30000 ;TYPE:Gap infill ;WIDTH:0.533984 G1 F9453 G1 X34.123 Y41.027 E.30012 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X32.123 Y41.027 ;WIPE_END G17 G3 Z98.6 I.91 J.808 P1 F30000 G1 X34.123 Y38.773 Z98.6 G1 Z98.2 G1 E.8 F1800 ;WIDTH:0.533988 G1 F9453 G1 X26.623 Y38.773 E.30012 ;LAYER_CHANGE ;Z:98.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;98.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X28.623 Y38.773 ;WIPE_END ;AFTER_LAYER_CHANGE ;98.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z98.8 I-.018 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z98.8 G1 Z98.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X4.104 Y39.152 E.0201 G1 X32.892 Y39.152 E.95495 G1 X33.498 Y39.152 E.0201 G1 F2400 G1 X33.498 Y39.446 E.00975 G1 F600 G1 X33.498 Y39.646 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X33.498 Y40.154 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X33.498 Y40.354 E.00663 M106 S255 G1 F2400 G1 X33.498 Y40.648 E.00975 G1 F18000 G1 X32.892 Y40.648 E.0201 G1 X3.708 Y40.648 E.96809 G1 X3.102 Y40.648 E.0201 G1 F2400 G1 X3.102 Y40.354 E.00975 G1 F600 G1 X3.102 Y40.154 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X3.102 Y39.646 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X3.102 Y39.446 E.00663 M106 S255 G1 F2400 G1 X3.102 Y38.546 E.02985 G1 F18000 G1 X3.102 Y-10.448 E1.62522 G1 X3.498 Y-10.448 E.01314 G1 X3.498 Y38.546 E1.62522 G1 X3.498 Y39.112 E.01878 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X33.905 Y38.745 E.99516 G1 F2400 G1 X33.905 Y39.446 E.02325 G1 F600 G1 X33.905 Y39.646 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X33.905 Y40.154 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X33.905 Y40.354 E.00663 M106 S255 G1 F2400 G1 X33.905 Y41.055 E.02325 G1 F18000 G1 X2.695 Y41.055 E1.03529 G1 F2400 G1 X2.695 Y40.354 E.02325 G1 F600 G1 X2.695 Y40.154 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X2.695 Y39.646 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X2.695 Y39.446 E.00663 M106 S255 G1 F2400 G1 X2.695 Y38.546 E.02985 G1 F18000 G1 X2.695 Y-10.6 E1.63026 G1 X2.695 Y-10.855 E.00846 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.883 Y38.31 E.01668 G1 X33.71 Y38.31 E.88577 G1 X34.34 Y38.31 E.01936 G1 F2400 G1 X34.34 Y39.446 E.03491 G1 F600 G1 X34.34 Y39.646 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X34.34 Y40.154 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X34.34 Y40.354 E.00615 M106 S255 G1 F2400 G1 X34.34 Y41.49 E.03491 G1 F12000 G1 X2.26 Y41.49 E.98573 G1 F2400 G1 X2.26 Y40.354 E.03491 G1 F600 G1 X2.26 Y40.154 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X2.26 Y39.646 E.01685 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X2.26 Y39.446 E.00615 M106 S255 G1 F2400 G1 X2.26 Y38.606 E.02581 G1 F12000 G1 X2.26 Y-10.66 E1.51381 G1 X2.26 Y-11.29 E.01936 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X4.883 Y-10.11 E.88577 G1 X4.34 Y-10.11 E.01668 G1 X4.34 Y-9.567 E.01668 G1 X4.34 Y37.7 E1.45238 G1 X4.34 Y38.27 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.524 Y39.178 Z98.8 F30000 G1 Z98.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X3.524 Y40.452 E.03913 G1 X3.901 Y40.452 E.01159 G1 X3.901 Y39.348 E.03392 G1 X4.278 Y39.348 E.01159 G1 X4.278 Y40.452 E.03392 G1 X4.655 Y40.452 E.01159 G1 X4.655 Y39.348 E.03392 G1 X5.033 Y39.348 E.01159 G1 X5.033 Y40.452 E.03392 G1 X5.41 Y40.452 E.01159 G1 X5.41 Y39.348 E.03392 G1 X5.787 Y39.348 E.01159 G1 X5.787 Y40.452 E.03392 G1 X6.164 Y40.452 E.01159 G1 X6.164 Y39.348 E.03392 G1 X6.541 Y39.348 E.01159 G1 X6.541 Y40.452 E.03392 G1 X6.918 Y40.452 E.01159 G1 X6.918 Y39.348 E.03392 G1 X7.295 Y39.348 E.01159 G1 X7.295 Y40.452 E.03392 G1 X7.672 Y40.452 E.01159 G1 X7.672 Y39.348 E.03392 G1 X8.049 Y39.348 E.01159 G1 X8.049 Y40.452 E.03392 G1 X8.426 Y40.452 E.01159 G1 X8.426 Y39.348 E.03392 G1 X8.803 Y39.348 E.01159 G1 X8.803 Y40.452 E.03392 G1 X9.18 Y40.452 E.01159 G1 X9.18 Y39.348 E.03392 G1 X9.557 Y39.348 E.01159 G1 X9.557 Y40.452 E.03392 G1 X9.935 Y40.452 E.01159 G1 X9.935 Y39.348 E.03392 G1 X10.312 Y39.348 E.01159 G1 X10.312 Y40.452 E.03392 G1 X10.689 Y40.452 E.01159 G1 X10.689 Y39.348 E.03392 G1 X11.066 Y39.348 E.01159 G1 X11.066 Y40.622 E.03913 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.723 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F15000 M106 S255 G1 X11.719 Y39.544 E.43028 G1 X11.718 Y40.256 E.02187 G1 X25.723 Y40.256 E.43033 G1 X25.723 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.074 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F15000 G1 X25.327 Y39.9 E.36135 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X23.327 Y39.9 ;WIPE_END G17 G3 Z98.8 I-.091 J1.214 P1 F30000 G1 X32.936 Y40.622 Z98.8 G1 Z98.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge ;WIDTH:0.42 G1 F1500 G1 X32.936 Y39.348 E.03913 G1 X32.559 Y39.348 E.01159 G1 X32.559 Y40.452 E.03392 G1 X32.182 Y40.452 E.01159 G1 X32.182 Y39.348 E.03392 G1 X31.805 Y39.348 E.01159 G1 X31.805 Y40.452 E.03392 G1 X31.428 Y40.452 E.01159 G1 X31.428 Y39.348 E.03392 G1 X31.051 Y39.348 E.01159 G1 X31.051 Y40.452 E.03392 G1 X30.674 Y40.452 E.01159 G1 X30.674 Y39.348 E.03392 G1 X30.297 Y39.348 E.01159 G1 X30.297 Y40.452 E.03392 G1 X29.92 Y40.452 E.01159 G1 X29.92 Y39.348 E.03392 G1 X29.543 Y39.348 E.01159 G1 X29.543 Y40.452 E.03392 G1 X29.165 Y40.452 E.01159 G1 X29.165 Y39.348 E.03392 G1 X28.788 Y39.348 E.01159 G1 X28.788 Y40.452 E.03392 G1 X28.411 Y40.452 E.01159 G1 X28.411 Y39.348 E.03392 G1 X28.034 Y39.348 E.01159 G1 X28.034 Y40.452 E.03392 G1 X27.657 Y40.452 E.01159 G1 X27.657 Y39.348 E.03392 G1 X27.28 Y39.348 E.01159 G1 X27.28 Y40.452 E.03392 G1 X26.903 Y40.452 E.01159 G1 X26.903 Y39.348 E.03392 G1 X26.526 Y39.348 E.01159 G1 X26.526 Y40.452 E.03392 G1 X26.149 Y40.452 E.01159 G1 X26.149 Y39.178 E.03913 ;LAYER_CHANGE ;Z:98.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;98.6 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X26.149 Y40.452 G1 X26.526 Y40.452 G1 X26.526 Y40.102 ;WIPE_END ;AFTER_LAYER_CHANGE ;98.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z99 I.05 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z99 G1 Z98.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7348 M106 S255 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7348 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7348 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X13.964 Y38.635 Z99 F30000 G1 X33.106 Y39.544 Z99 G1 Z98.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7348 G1 X3.494 Y39.544 E.90988 G1 X3.494 Y40.256 E.02187 G1 X33.106 Y40.256 E.90988 G1 X33.106 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F7348 G1 X32.71 Y39.9 E.78692 ;LAYER_CHANGE ;Z:98.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;98.8 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;98.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z99.2 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z99.2 G1 Z98.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F7485 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04962 G1 X3.102 Y40.648 E1.00829 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F7485 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X2.695 Y41.055 E1.03529 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F7485 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X2.26 Y41.49 E.98573 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.235 Y39.544 Z99.2 F30000 G1 Z98.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7485 G1 X3.494 Y39.544 E.0535 G1 X3.494 Y40.256 E.02187 G1 X5.18 Y40.256 E.0518 G3 X5.228 Y39.583 I1.939 J-.199 E.02082 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7485 G1 X4.784 Y39.9 E.02548 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.37 Y39.815 F30000 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.420695 G1 F7485 G1 X15.564 Y40.622 E.0351 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.029 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X16.37 Y39.281 E.05836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.938 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X14.495 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.961 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X15.404 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X14.87 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X13.427 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.892 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X14.335 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X13.801 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X12.358 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.824 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X13.267 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X12.733 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X11.29 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.755 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X12.198 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X11.664 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X10.221 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.687 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X11.13 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X10.596 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X9.153 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.618 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X10.061 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X9.527 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X8.084 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.55 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X8.993 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X8.459 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X7.015 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.481 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X7.924 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X7.39 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X5.947 Y40.622 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.413 Y40.622 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X6.856 Y39.178 E.06283 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.322 Y39.178 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F7485 G1 X5.387 Y40.113 E.04068 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.322 Y39.178 ;WIPE_END G1 X13.949 Y39.45 Z99.2 F30000 G1 X16.577 Y39.544 Z99.2 G1 Z98.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F7485 G1 X16.577 Y40.256 E.02187 G1 X33.106 Y40.256 E.50788 G1 X33.106 Y39.544 E.02187 G1 X16.617 Y39.544 E.50665 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.933 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F7485 G1 X32.71 Y39.9 E.43018 ;LAYER_CHANGE ;Z:99 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;99 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;99 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z99.4 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z99.4 G1 Z99 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6981 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z99.4 F30000 G1 X16.302 Y40.648 Z99.4 G1 Z99 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6981 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z99.4 F30000 G1 X3.905 Y38.745 Z99.4 G1 Z99 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6981 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6981 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.906 Y39.544 Z99.4 F30000 G1 Z99 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6981 G1 X3.494 Y39.544 E.0741 G1 X3.494 Y40.256 E.02187 G1 X5.906 Y40.256 E.0741 G1 X5.906 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6981 G1 X5.51 Y39.9 E.04526 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6981 G1 X16.099 Y39 E.08049 G1 X19.739 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6981 G1 X18.111 Y39.363 E.05401 G1 X17.262 Y39.877 E.03293 G2 X17.09 Y40.437 I.304 J.399 E.02074 G1 X20.633 Y40.437 E.11754 G1 X21.559 Y39.877 E.03587 G1 X21.751 Y39.549 E.01261 G1 X21.734 Y39.363 E.00621 G1 X23.352 Y39.363 E.05367 G1 X22.503 Y39.877 E.03293 G2 X22.331 Y40.437 I.304 J.399 E.02074 G1 X25.875 Y40.437 E.11754 G1 X26.748 Y39.908 E.03387 G1 X26.771 Y39.363 E.0181 G1 X25.697 Y39.363 E.03562 G1 X27.144 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6981 G1 X27.14 Y40.256 E.02187 G1 X33.106 Y40.256 E.1833 G1 X33.106 Y39.544 E.02187 G1 X27.184 Y39.544 E.18195 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.496 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6981 G1 X32.71 Y39.9 E.14216 ;LAYER_CHANGE ;Z:99.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;99.2 G1 E-.8 F1800 M73 P96 R4 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END ;AFTER_LAYER_CHANGE ;99.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z99.6 I.033 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z99.6 G1 Z99.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6850 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z99.6 F30000 G1 X16.302 Y40.648 Z99.6 G1 Z99.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6850 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z99.6 F30000 G1 X3.905 Y38.745 Z99.6 G1 Z99.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6850 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6850 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X4.12 Y39.363 Z99.6 F30000 G1 Z99.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6850 G1 X5.748 Y39.363 E.05401 G3 X5.431 Y39.877 I-.743 J-.104 E.02063 G1 X4.782 Y40.437 E.02841 G1 X3.313 Y40.437 E.04874 G1 X3.313 Y40.278 E.00527 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6850 G1 X16.099 Y39 E.08049 G1 X16.632 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6850 G1 X18.261 Y39.363 E.05401 G1 X17.666 Y39.877 E.02608 G2 X17.335 Y40.437 I.471 J.655 E.0222 G1 X20.506 Y40.437 E.10519 G1 X21.154 Y39.877 E.02841 G2 X21.472 Y39.363 I-.425 J-.618 E.02063 G1 X23.502 Y39.363 E.06733 G1 X22.907 Y39.877 E.02608 G2 X22.577 Y40.437 I.471 J.655 E.0222 G1 X25.748 Y40.437 E.10519 G1 X26.396 Y39.877 E.02841 G2 X26.714 Y39.363 I-.425 J-.618 E.02063 G1 X28.743 Y39.363 E.06733 G1 X28.149 Y39.877 E.02608 G2 X27.818 Y40.437 I.471 J.655 E.0222 G1 X30.989 Y40.437 E.10519 G1 X31.637 Y39.877 E.02841 G2 X31.955 Y39.363 I-.425 J-.618 E.02063 G1 X33.287 Y39.363 E.04418 G1 X33.287 Y40.003 E.02124 G2 X33.059 Y40.437 I.379 J.475 E.01671 G1 X31.431 Y40.437 E.05401 ;LAYER_CHANGE ;Z:99.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;99.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.059 Y40.437 G1 X33.123 Y40.205 G1 X33.206 Y40.103 ;WIPE_END ;AFTER_LAYER_CHANGE ;99.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z99.8 I.039 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z99.8 G1 Z99.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6817 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z99.8 F30000 G1 X16.302 Y40.648 Z99.8 G1 Z99.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6817 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z99.8 F30000 G1 X3.905 Y38.745 Z99.8 G1 Z99.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6817 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6817 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.932 Y39.363 Z99.8 F30000 G1 Z99.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6817 G1 X5.56 Y39.363 E.05401 G3 X4.669 Y40.437 I-3.89 J-2.321 E.04647 G1 X3.313 Y40.437 E.04499 G1 X3.313 Y40.165 E.00903 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6817 G1 X16.099 Y39 E.08049 G1 X16.756 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6817 G1 X18.385 Y39.363 E.05401 G2 X17.514 Y40.437 I2.709 J3.086 E.04607 G1 X20.393 Y40.437 E.09549 G2 X21.284 Y39.363 I-3 J-3.395 E.04647 G1 X23.626 Y39.363 E.07769 G2 X22.756 Y40.437 I2.709 J3.086 E.04607 G1 X25.634 Y40.437 E.09549 G2 X26.525 Y39.363 I-3 J-3.395 E.04647 G1 X28.867 Y39.363 E.07769 G2 X27.997 Y40.437 I2.709 J3.086 E.04607 G1 X30.876 Y40.437 E.09549 G2 X31.767 Y39.363 I-3 J-3.395 E.04647 G1 X33.287 Y39.363 E.05043 G1 X33.287 Y39.471 E.00358 ;LAYER_CHANGE ;Z:99.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;99.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.287 Y39.363 G1 X31.767 Y39.363 G1 X31.678 Y39.549 G1 X31.567 Y39.672 ;WIPE_END ;AFTER_LAYER_CHANGE ;99.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z100 I.023 J-1.217 P1 F30000 G1 X3.498 Y39.152 Z100 G1 Z99.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6810 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z100 F30000 G1 X16.302 Y40.648 Z100 G1 Z99.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6810 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z100 F30000 G1 X3.905 Y38.745 Z100 G1 Z99.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6810 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6810 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y40.044 Z100 F30000 G1 Z99.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6810 G1 X3.313 Y40.437 E.01305 G1 X4.548 Y40.437 E.04097 G3 X5.389 Y39.363 I44.57 J34.047 E.04525 G1 X6.087 Y39.363 E.02314 G1 X6.087 Y40.294 E.03087 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6810 G1 X16.099 Y39 E.08049 G1 X16.513 Y39.966 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6810 G1 X16.513 Y40.437 E.01561 G1 X17.671 Y40.437 E.0384 G2 X18.513 Y39.363 I-43.733 J-35.161 E.04527 G1 X21.113 Y39.363 E.08626 G2 X20.272 Y40.437 I43.729 J35.121 E.04525 G1 X22.912 Y40.437 E.08758 G2 X23.754 Y39.363 I-43.737 J-35.165 E.04527 G1 X26.354 Y39.363 E.08626 G2 X25.513 Y40.437 I43.729 J35.121 E.04525 G1 X28.153 Y40.437 E.08758 G2 X28.995 Y39.363 I-43.737 J-35.165 E.04527 G1 X31.596 Y39.363 E.08626 G2 X30.755 Y40.437 I43.729 J35.121 E.04525 G1 X32.383 Y40.437 E.05401 ;LAYER_CHANGE ;Z:99.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;99.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.755 Y40.437 G1 X30.984 Y40.144 ;WIPE_END ;AFTER_LAYER_CHANGE ;99.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z100.2 I.044 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z100.2 G1 Z99.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6809 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 M73 P96 R3 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z100.2 F30000 G1 X16.302 Y40.648 Z100.2 G1 Z99.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6809 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z100.2 F30000 G1 X3.905 Y38.745 Z100.2 G1 Z99.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6809 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6809 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.313 Y39.882 Z100.2 F30000 G1 Z99.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6809 G1 X3.313 Y40.437 E.0184 G1 X4.387 Y40.437 E.03561 G3 X5.263 Y39.363 I3.179 J1.7 E.04626 G1 X6.087 Y39.363 E.02734 G1 X6.087 Y40.167 E.02668 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6809 G1 X16.099 Y39 E.08049 G1 X16.513 Y40.085 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6809 G1 X16.513 Y40.437 E.01166 G1 X17.79 Y40.437 E.04235 G2 X18.689 Y39.363 I-2.532 J-3.033 E.0467 G1 X20.987 Y39.363 E.07622 G2 X20.111 Y40.437 I2.303 J2.774 E.04626 G1 X23.031 Y40.437 E.09688 G2 X23.93 Y39.363 I-2.532 J-3.033 E.0467 G1 X26.228 Y39.363 E.07622 G2 X25.352 Y40.437 I2.303 J2.774 E.04626 G1 X28.273 Y40.437 E.09688 G2 X29.172 Y39.363 I-2.532 J-3.033 E.0467 G1 X31.469 Y39.363 E.07622 G2 X30.593 Y40.437 I2.303 J2.774 E.04626 G1 X32.222 Y40.437 E.05401 ;LAYER_CHANGE ;Z:100 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;100 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.593 Y40.437 G1 X30.698 Y40.205 G1 X30.777 Y40.118 ;WIPE_END ;AFTER_LAYER_CHANGE ;100 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z100.4 I.043 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z100.4 G1 Z100 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6811 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z100.4 F30000 G1 X16.302 Y40.648 Z100.4 G1 Z100 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6811 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z100.4 F30000 G1 X3.905 Y38.745 Z100.4 G1 Z100 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6811 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6811 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.509 Y39.363 Z100.4 F30000 G1 Z100 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6811 G1 X5.138 Y39.363 E.05401 G1 X4.517 Y39.877 E.02672 G2 X4.2 Y40.437 I.43 J.613 E.02206 G1 X5.829 Y40.437 E.05401 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6811 G1 X16.099 Y39 E.08049 G1 X16.513 Y40.199 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6811 G1 X16.513 Y40.437 E.0079 G1 X17.903 Y40.437 E.04611 G1 X18.579 Y39.877 E.02911 G2 X18.885 Y39.363 I-.387 J-.579 E.02051 G1 X20.862 Y39.363 E.06556 G1 X20.241 Y39.877 E.02672 G2 X19.924 Y40.437 I.43 J.613 E.02206 G1 X23.145 Y40.437 E.10683 G1 X23.82 Y39.877 E.02911 G2 X24.127 Y39.363 I-.387 J-.579 E.02051 G1 X26.103 Y39.363 E.06556 G1 X25.483 Y39.877 E.02672 G2 X25.165 Y40.437 I.43 J.613 E.02206 G1 X28.386 Y40.437 E.10683 G1 X29.062 Y39.877 E.02911 G2 X29.368 Y39.363 I-.387 J-.579 E.02051 G1 X31.344 Y39.363 E.06556 G1 X30.724 Y39.877 E.02672 G2 X30.407 Y40.437 I.43 J.613 E.02206 G1 X32.035 Y40.437 E.05401 ;LAYER_CHANGE ;Z:100.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;100.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.407 Y40.437 G1 X30.462 Y40.205 G1 X30.545 Y40.101 ;WIPE_END ;AFTER_LAYER_CHANGE ;100.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z100.6 I.043 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z100.6 G1 Z100.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6832 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z100.6 F30000 G1 X16.302 Y40.648 Z100.6 G1 Z100.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6832 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z100.6 F30000 G1 X3.905 Y38.745 Z100.6 G1 Z100.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6832 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6832 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X4.771 Y39.363 Z100.6 F30000 G1 Z100.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6832 G1 X3.441 Y39.363 E.04411 G3 X3.327 Y39.877 I-.424 J.175 E.0186 G1 X3.313 Y40.437 E.01858 G1 X3.94 Y40.437 E.02079 G3 X4.046 Y39.877 I.453 J-.204 E.02013 G1 X4.975 Y39.363 E.03521 G1 X6.087 Y39.363 E.0369 G1 X6.087 Y39.879 E.01711 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6832 G1 X16.099 Y39 E.08049 G1 X16.513 Y40.334 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6832 G1 X16.513 Y40.437 E.0034 G1 X18.039 Y40.437 E.05061 G1 X19.051 Y39.877 E.03836 G2 X19.165 Y39.363 I-.309 J-.339 E.0186 G1 X20.698 Y39.363 E.05086 G1 X19.77 Y39.877 E.03521 G2 X19.664 Y40.437 I.347 J.356 E.02013 G1 X23.28 Y40.437 E.11997 G1 X24.292 Y39.877 E.03836 G2 X24.407 Y39.363 I-.309 J-.339 E.0186 G1 X25.94 Y39.363 E.05086 G1 X25.011 Y39.877 E.03521 G2 X24.905 Y40.437 I.347 J.356 E.02013 G1 X28.521 Y40.437 E.11997 G1 X29.533 Y39.877 E.03836 G2 X29.648 Y39.363 I-.309 J-.339 E.0186 G1 X31.181 Y39.363 E.05086 G1 X30.252 Y39.877 E.03521 G2 X30.146 Y40.437 I.347 J.356 E.02013 G1 X31.775 Y40.437 E.05401 ;LAYER_CHANGE ;Z:100.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;100.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.146 Y40.437 G1 X30.103 Y40.205 G1 X30.159 Y40.081 ;WIPE_END ;AFTER_LAYER_CHANGE ;100.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z100.8 I.042 J-1.216 P1 F30000 G1 X3.498 Y39.152 Z100.8 G1 Z100.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6920 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G1 X13.057 Y40.195 Z100.8 F30000 G1 X16.302 Y40.648 Z100.8 G1 Z100.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6920 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G1 X9.177 Y38.911 Z100.8 F30000 G1 X3.905 Y38.745 Z100.8 G1 Z100.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6920 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X33.905 Y-10.855 E1.03529 G1 X33.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.99516 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6920 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X34.34 Y-11.29 E.98573 G1 X34.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.92182 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X6.087 Y39.651 Z100.8 F30000 G1 Z100.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6920 G1 X6.087 Y39.363 E.00954 G1 X4.746 Y39.363 E.04448 G3 X3.925 Y39.363 I-.41 J-.808 E.02826 G1 X3.313 Y39.363 E.02031 G1 X3.313 Y40.379 E.03371 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6920 G1 X16.099 Y39 E.08049 G1 X31.344 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6920 G1 X29.715 Y40.437 E.05401 G2 X29.238 Y40.288 I-.365 J.332 E.0174 G1 X28.652 Y40.437 E.02006 G1 X24.474 Y40.437 E.13858 G2 X23.996 Y40.288 I-.365 J.332 E.0174 G1 X23.41 Y40.437 E.02006 G1 X19.233 Y40.437 E.13858 G2 X18.755 Y40.288 I-.365 J.332 E.0174 G1 X18.169 Y40.437 E.02006 G1 X16.513 Y40.437 E.05493 G1 X16.513 Y39.363 E.03562 G1 X19.649 Y39.363 E.10403 G2 X20.47 Y39.363 I.41 J-.808 E.02826 G1 X24.891 Y39.363 E.14664 G2 X25.711 Y39.363 I.41 J-.808 E.02826 G1 X30.132 Y39.363 E.14664 G2 X30.953 Y39.363 I.41 J-.808 E.02826 G1 X32.581 Y39.363 E.05401 ;LAYER_CHANGE ;Z:100.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;100.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.953 Y39.363 G1 X30.592 Y39.454 ;WIPE_END ;AFTER_LAYER_CHANGE ;100.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z101 I.026 J-1.217 P1 F30000 G1 X16.302 Y39.152 Z101 G1 Z100.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6222 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6222 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X14.059 Y31.375 Z101 F30000 G1 X12.195 Y-10.545 Z101 G1 Z100.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z101 F30000 G1 X3.498 Y39.152 Z101 G1 Z100.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:100.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;100.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;100.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z101.2 I-.104 J1.213 P1 F30000 G1 X16.302 Y39.152 Z101.2 G1 Z100.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6222 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X14.059 Y31.375 Z101.2 F30000 G1 X12.195 Y-10.545 Z101.2 G1 Z100.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z101.2 F30000 G1 X3.498 Y39.152 Z101.2 G1 Z100.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 M73 P97 R3 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:101 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;101 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;101 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z101.4 I-.104 J1.213 P1 F30000 G1 X16.302 Y39.152 Z101.4 G1 Z101 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6222 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X14.059 Y31.375 Z101.4 F30000 G1 X12.195 Y-10.545 Z101.4 G1 Z101 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z101.4 F30000 G1 X3.498 Y39.152 Z101.4 G1 Z101 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:101.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;101.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;101.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z101.6 I-.104 J1.213 P1 F30000 G1 X16.302 Y39.152 Z101.6 G1 Z101.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6222 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X14.059 Y31.375 Z101.6 F30000 G1 X12.195 Y-10.545 Z101.6 G1 Z101.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z101.6 F30000 G1 X3.498 Y39.152 Z101.6 G1 Z101.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:101.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;101.4 G1 E-.8 F1800 M73 P97 R2 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;101.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z101.8 I-.104 J1.213 P1 F30000 G1 X16.302 Y39.152 Z101.8 G1 Z101.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6724 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6724 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6724 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6724 G1 X12.399 Y39 E.03103 G1 X16.638 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6724 G1 X16.513 Y39.363 E.00414 G1 X16.513 Y40.437 E.03562 G1 X16.943 Y40.437 E.01426 G1 X17.117 Y40.308 E.00718 G3 X18.046 Y40.437 I.289 J1.332 E.03176 G1 X22.184 Y40.437 E.13727 G1 X22.358 Y40.308 E.00718 G3 X23.287 Y40.437 I.289 J1.332 E.03176 G1 X27.425 Y40.437 E.13727 G1 X27.6 Y40.308 E.00718 G3 X28.529 Y40.437 I.289 J1.332 E.03176 G1 X32.667 Y40.437 E.13727 G3 X33.287 Y40.309 I.439 J.564 E.02176 G1 X33.287 Y39.363 E.03138 G1 X32.298 Y39.363 E.03281 G3 X31.431 Y39.363 I-.433 J-.785 E.03002 G1 X27.056 Y39.363 E.1451 G3 X26.19 Y39.363 I-.433 J-.785 E.03002 G1 X21.815 Y39.363 E.1451 G3 X20.948 Y39.363 I-.433 J-.785 E.03002 G1 X19.32 Y39.363 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.948 Y39.363 G1 X21.308 Y39.458 ;WIPE_END G1 X19.939 Y31.949 Z101.8 F30000 G1 X12.195 Y-10.545 Z101.8 G1 Z101.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6724 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6724 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z101.8 F30000 G1 X3.498 Y39.152 Z101.8 G1 Z101.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6724 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6724 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6724 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X3.596 Y39.363 Z101.8 F30000 G1 Z101.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6724 G1 X5.224 Y39.363 E.05401 G2 X6.087 Y39.366 I.434 J-.789 E.02984 G1 X6.087 Y40.437 E.03551 G1 X5.529 Y40.437 E.0185 ;LAYER_CHANGE ;Z:101.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;101.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X6.087 Y40.437 G1 X6.087 Y39.366 G1 X5.979 Y39.446 G1 X5.742 Y39.468 ;WIPE_END ;AFTER_LAYER_CHANGE ;101.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z102 I.036 J1.216 P1 F30000 G1 X16.302 Y39.152 Z102 G1 Z101.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6718 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6718 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6718 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6718 G1 X12.399 Y39 E.03103 G1 X17.966 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6718 G1 X16.521 Y40.437 E.04796 G2 X16.513 Y40.12 I-.225 J-.153 E.01123 G1 X16.513 Y39.363 E.0251 G1 X17.052 Y39.363 E.01786 G2 X17.189 Y39.877 I.427 J.161 E.01884 G1 X18.17 Y40.437 E.03745 G1 X21.762 Y40.437 E.11915 G2 X21.631 Y39.877 I-.456 J-.189 E.02036 G1 X20.731 Y39.363 E.03438 G1 X22.293 Y39.363 E.0518 G2 X22.431 Y39.877 I.427 J.161 E.01884 G1 X23.411 Y40.437 E.03745 G1 X27.003 Y40.437 E.11915 G2 X26.872 Y39.877 I-.456 J-.189 E.02036 G1 X25.972 Y39.363 E.03438 G1 X27.534 Y39.363 E.0518 G2 X27.672 Y39.877 I.427 J.161 E.01884 G1 X28.652 Y40.437 E.03745 G1 X30.281 Y40.437 E.05401 G1 X29.585 Y39.363 F30000 G1 F6718 G1 X31.214 Y39.363 E.05401 G1 X32.114 Y39.877 E.03438 G3 X32.244 Y40.437 I-.325 J.371 E.02036 G1 X33.287 Y40.437 E.03458 G1 X33.287 Y40.09 E.01149 G3 X32.775 Y39.363 I.154 J-.652 E.03225 G1 X31.417 Y39.363 E.04505 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X32.775 Y39.363 G1 X32.747 Y39.549 G1 X32.913 Y39.877 G1 X32.988 Y39.92 ;WIPE_END G1 X30.08 Y32.863 Z102 F30000 G1 X12.195 Y-10.545 Z102 G1 Z101.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6718 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6718 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z102 F30000 G1 X3.498 Y39.152 Z102 G1 Z101.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6718 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6718 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6718 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X3.379 Y39.363 Z102 F30000 G1 Z101.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6718 G1 X5.007 Y39.363 E.05401 G1 X5.907 Y39.877 E.03438 G3 X6.038 Y40.437 I-.325 J.371 E.02036 G1 X4.41 Y40.437 E.05401 ;LAYER_CHANGE ;Z:101.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;101.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X6.038 Y40.437 G1 X6.074 Y40.205 G1 X6.012 Y40.083 ;WIPE_END ;AFTER_LAYER_CHANGE ;101.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z102.2 I.11 J1.212 P1 F30000 G1 X16.302 Y39.152 Z102.2 G1 Z101.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6689 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6689 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6689 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6689 G1 X12.399 Y39 E.03103 G1 X16.513 Y40.179 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6689 G1 X16.513 Y39.363 E.02707 G1 X17.325 Y39.363 E.02694 G1 X17.372 Y39.549 E.00637 G2 X18.302 Y40.437 I2.722 J-1.923 E.04292 G1 X21.506 Y40.437 E.10629 G1 X21.449 Y40.205 E.00794 G2 X20.573 Y39.363 I-2.578 J1.806 E.04054 G1 X22.567 Y39.363 E.06613 G1 X22.613 Y39.549 E.00637 G2 X23.543 Y40.437 I2.722 J-1.923 E.04292 G1 X26.748 Y40.437 E.10629 G1 X26.69 Y40.205 E.00794 G2 X25.814 Y39.363 I-2.578 J1.806 E.04054 G1 X27.808 Y39.363 E.06613 G1 X27.854 Y39.549 E.00637 G2 X28.785 Y40.437 I2.722 J-1.923 E.04292 G1 X30.413 Y40.437 E.05401 G1 X29.427 Y39.363 F30000 G1 F6689 G1 X31.056 Y39.363 E.05401 G1 X31.667 Y39.877 E.02651 G3 X31.989 Y40.437 I-.443 J.627 E.02211 G1 X33.287 Y40.437 E.04305 G1 X33.287 Y39.787 E.02156 G3 X33.049 Y39.363 I.338 J-.468 E.01664 G1 X31.421 Y39.363 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.049 Y39.363 G1 X33.096 Y39.549 G1 X33.208 Y39.689 ;WIPE_END G1 X30.263 Y32.648 Z102.2 F30000 G1 X12.195 Y-10.545 Z102.2 G1 Z101.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6689 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6689 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z102.2 F30000 G1 X3.498 Y39.152 Z102.2 G1 Z101.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6689 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6689 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6689 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X3.313 Y39.455 Z102.2 F30000 G1 Z101.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6689 G1 X3.313 Y39.363 E.00306 G1 X4.849 Y39.363 E.05095 G3 X5.725 Y40.205 I-1.702 J2.648 E.04054 G1 X5.783 Y40.437 E.00794 G1 X4.154 Y40.437 E.05401 ;LAYER_CHANGE ;Z:102 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;102 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X5.783 Y40.437 G1 X5.725 Y40.205 G1 X5.642 Y40.102 ;WIPE_END ;AFTER_LAYER_CHANGE ;102 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z102.4 I.108 J1.212 P1 F30000 G1 X16.302 Y39.152 Z102.4 G1 Z102 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6648 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6648 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6648 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6648 G1 X12.399 Y39 E.03103 G1 X16.513 Y39.985 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6648 G1 X16.513 Y39.363 E.02065 G1 X17.519 Y39.363 E.03337 G2 X18.415 Y40.437 I3.566 J-2.066 E.04662 G1 X21.322 Y40.437 E.09643 G2 X20.448 Y39.363 I-3.298 J1.793 E.0462 G1 X22.76 Y39.363 E.07669 G2 X23.657 Y40.437 I3.566 J-2.066 E.04662 G1 X26.564 Y40.437 E.09643 G2 X25.69 Y39.363 I-3.298 J1.793 E.0462 G1 X28.002 Y39.363 E.07669 G2 X28.898 Y40.437 I3.566 J-2.066 E.04662 G1 X31.805 Y40.437 E.09643 G2 X30.931 Y39.363 I-3.298 J1.793 E.0462 G1 X32.559 Y39.363 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.931 Y39.363 G1 X31.181 Y39.638 ;WIPE_END G1 X28.481 Y32.499 Z102.4 F30000 G1 X12.195 Y-10.545 Z102.4 G1 Z102 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6648 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6648 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z102.4 F30000 G1 X3.498 Y39.152 Z102.4 G1 Z102 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6648 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6648 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6648 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X3.313 Y39.58 Z102.4 F30000 G1 Z102 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6648 G1 X3.313 Y39.363 E.0072 G1 X4.724 Y39.363 E.04681 G3 X5.599 Y40.437 I-2.424 J2.866 E.0462 G1 X3.97 Y40.437 E.05401 ;LAYER_CHANGE ;Z:102.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;102.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X5.599 Y40.437 G1 X5.492 Y40.205 G1 X5.414 Y40.119 ;WIPE_END ;AFTER_LAYER_CHANGE ;102.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z102.6 I.108 J1.212 P1 F30000 G1 X16.302 Y39.152 Z102.6 G1 Z102.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6643 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6643 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6643 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6643 G1 X12.399 Y39 E.03103 G1 X16.513 Y39.811 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6643 G1 X16.513 Y39.363 E.01486 G1 X17.693 Y39.363 E.03916 G2 X18.535 Y40.437 I123.741 J-96.124 E.04526 G1 X21.163 Y40.437 E.08716 G2 X20.321 Y39.363 I-123.803 J96.135 E.04525 G1 X22.935 Y39.363 E.08669 G2 X23.776 Y40.437 I123.807 J-96.175 E.04526 G1 X26.404 Y40.437 E.08716 G2 X25.563 Y39.363 I-123.803 J96.135 E.04525 G1 X28.176 Y39.363 E.08669 G2 X29.018 Y40.437 I123.807 J-96.175 E.04526 G1 X31.645 Y40.437 E.08716 G2 X30.804 Y39.363 I-123.803 J96.135 E.04525 G1 X32.432 Y39.363 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X30.804 Y39.363 G1 X31.033 Y39.656 ;WIPE_END G1 X28.352 Y32.51 Z102.6 F30000 G1 X12.195 Y-10.545 Z102.6 G1 Z102.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6643 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6643 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z102.6 F30000 G1 X3.498 Y39.152 Z102.6 G1 Z102.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6643 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6643 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6643 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X3.313 Y39.707 Z102.6 F30000 G1 Z102.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6643 G1 X3.313 Y39.363 E.01141 G1 X4.598 Y39.363 E.04261 G3 X5.439 Y40.437 I-122.962 J97.209 E.04525 G1 X6.087 Y40.437 E.0215 G1 X6.087 Y39.457 E.03252 ;LAYER_CHANGE ;Z:102.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;102.4 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X6.087 Y40.437 G1 X5.439 Y40.437 G1 X5.21 Y40.144 ;WIPE_END ;AFTER_LAYER_CHANGE ;102.4 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z102.8 I.108 J1.212 P1 F30000 G1 X16.302 Y39.152 Z102.8 G1 Z102.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6639 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6639 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6639 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6639 G1 X12.399 Y39 E.03103 G1 X17.065 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6639 G1 X18.693 Y40.437 E.05401 G2 X17.821 Y39.363 I-3.441 J1.904 E.04613 G1 X20.149 Y39.363 E.07722 G2 X21.042 Y40.437 I3.731 J-2.195 E.04654 G1 X23.934 Y40.437 E.09594 G2 X23.062 Y39.363 I-3.441 J1.904 E.04613 G1 X25.39 Y39.363 E.07722 G2 X26.284 Y40.437 I3.731 J-2.195 E.04654 G1 X29.176 Y40.437 E.09594 G2 X28.304 Y39.363 I-3.441 J1.904 E.04613 G1 X30.631 Y39.363 E.07722 G2 X31.525 Y40.437 I3.731 J-2.195 E.04654 G1 X33.153 Y40.437 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X31.525 Y40.437 G1 X31.275 Y40.162 ;WIPE_END G1 X28.587 Y33.018 Z102.8 F30000 G1 X12.195 Y-10.545 Z102.8 G1 Z102.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6639 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6639 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z102.8 F30000 G1 X3.498 Y39.152 Z102.8 G1 Z102.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6639 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6639 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6639 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X6.053 Y39.363 Z102.8 F30000 G1 Z102.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6639 G1 X4.425 Y39.363 E.05401 G2 X5.318 Y40.437 I3.731 J-2.195 E.04654 G1 X3.69 Y40.437 E.05401 ;LAYER_CHANGE ;Z:102.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;102.6 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X5.318 Y40.437 G1 X5.068 Y40.162 M73 P98 R2 ;WIPE_END ;AFTER_LAYER_CHANGE ;102.6 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z103 I.109 J1.212 P1 F30000 G1 X16.302 Y39.152 Z103 G1 Z102.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6641 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6641 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6641 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6641 G1 X12.399 Y39 E.03103 G1 X17.246 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6641 G1 X18.874 Y40.437 E.05401 G1 X18.813 Y40.205 E.00797 G2 X17.945 Y39.363 I-2.695 J1.912 E.04033 G1 X19.958 Y39.363 E.06677 G1 X20.007 Y39.549 E.00639 G2 X20.929 Y40.437 I2.846 J-2.034 E.04269 G1 X24.116 Y40.437 E.10571 G1 X24.055 Y40.205 E.00797 G2 X23.187 Y39.363 I-2.695 J1.912 E.04033 G1 X25.199 Y39.363 E.06677 G1 X25.248 Y39.549 E.00639 G2 X26.17 Y40.437 I2.846 J-2.034 E.04269 G1 X29.357 Y40.437 E.10571 G1 X29.296 Y40.205 E.00797 G2 X28.428 Y39.363 I-2.695 J1.912 E.04033 G1 X30.441 Y39.363 E.06677 G1 X30.49 Y39.549 E.00639 G2 X31.412 Y40.437 I2.846 J-2.034 E.04269 G1 X33.04 Y40.437 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X31.412 Y40.437 G1 X31.129 Y40.196 ;WIPE_END G1 X28.461 Y33.045 Z103 F30000 G1 X12.195 Y-10.545 Z103 G1 Z102.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6641 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6641 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z103 F30000 G1 X3.498 Y39.152 Z103 G1 Z102.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6641 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6641 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6641 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X5.862 Y39.363 Z103 F30000 G1 Z102.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6641 G1 X4.234 Y39.363 E.05401 G1 X4.283 Y39.549 E.00639 G2 X5.205 Y40.437 I2.846 J-2.034 E.04269 G1 X3.577 Y40.437 E.05401 ;LAYER_CHANGE ;Z:102.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;102.8 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X5.205 Y40.437 G1 X4.922 Y40.196 ;WIPE_END ;AFTER_LAYER_CHANGE ;102.8 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z103.2 I.111 J1.212 P1 F30000 G1 X16.302 Y39.152 Z103.2 G1 Z102.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6672 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6672 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6672 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6672 G1 X12.399 Y39 E.03103 G1 X17.496 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6672 G1 X19.124 Y40.437 E.05401 G2 X18.971 Y39.877 I-.465 J-.173 E.02057 G1 X18.099 Y39.363 E.03357 G1 X19.691 Y39.363 E.05281 G2 X19.85 Y39.877 I.436 J.147 E.01906 G1 X20.8 Y40.437 E.03658 G1 X24.366 Y40.437 E.11829 G2 X24.212 Y39.877 I-.465 J-.173 E.02057 G1 X23.34 Y39.363 E.03357 G1 X24.932 Y39.363 E.05281 G2 X25.091 Y39.877 I.436 J.147 E.01906 G1 X26.041 Y40.437 E.03658 G1 X29.607 Y40.437 E.11829 G2 X29.453 Y39.877 I-.465 J-.173 E.02057 G1 X28.581 Y39.363 E.03357 G1 X30.173 Y39.363 E.05281 G2 X30.332 Y39.877 I.436 J.147 E.01906 G1 X31.282 Y40.437 E.03658 G1 X32.911 Y40.437 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X31.282 Y40.437 G1 X30.962 Y40.248 ;WIPE_END G1 X28.317 Y33.089 Z103.2 F30000 G1 X12.195 Y-10.545 Z103.2 G1 Z102.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6672 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6672 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z103.2 F30000 G1 X3.498 Y39.152 Z103.2 G1 Z102.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6672 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 M73 P98 R1 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6672 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6672 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X4.872 Y40.437 Z103.2 F30000 G1 Z102.8 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6672 G1 X3.4 Y40.437 E.04882 G2 X3.313 Y39.997 I-.349 J-.159 E.01589 G1 X3.313 Y39.363 E.02103 G1 X3.967 Y39.363 E.02168 G2 X4.126 Y39.877 I.436 J.147 E.01906 G1 X5.076 Y40.437 E.03658 G1 X6.087 Y40.437 E.03354 G1 X6.087 Y39.82 E.02048 ;LAYER_CHANGE ;Z:103 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;103 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X6.087 Y40.437 G1 X5.076 Y40.437 G1 X4.756 Y40.248 ;WIPE_END ;AFTER_LAYER_CHANGE ;103 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z103.4 I.115 J1.212 P1 F30000 G1 X16.302 Y39.152 Z103.4 G1 Z103 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6764 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6764 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6764 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6764 G1 X12.399 Y39 E.03103 G1 X31.333 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6764 G1 X29.705 Y39.363 E.05401 G3 X28.787 Y39.363 I-.459 J-.769 E.03199 G1 X24.464 Y39.363 E.1434 G3 X23.545 Y39.363 I-.459 J-.769 E.03199 G1 X19.222 Y39.363 E.1434 G3 X18.304 Y39.363 I-.459 J-.769 E.03199 G1 X16.513 Y39.363 E.0594 G1 X16.513 Y40.437 E.03562 G1 X19.535 Y40.437 E.10023 G1 X19.738 Y40.29 E.00832 G3 X20.683 Y40.437 I.265 J1.401 E.03235 G1 X24.776 Y40.437 E.13579 G1 X24.979 Y40.29 E.00832 G3 X25.924 Y40.437 I.265 J1.401 E.03235 G1 X30.017 Y40.437 E.13579 G1 X30.22 Y40.29 E.00832 G3 X31.165 Y40.437 I.265 J1.401 E.03235 G1 X32.794 Y40.437 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X31.165 Y40.437 G1 X30.807 Y40.338 ;WIPE_END G1 X28.185 Y33.17 Z103.4 F30000 G1 X12.195 Y-10.545 Z103.4 G1 Z103 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6764 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6764 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z103.4 F30000 G1 X3.498 Y39.152 Z103.4 G1 Z103 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6764 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6764 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6764 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X3.37 Y39.363 Z103.4 F30000 G1 Z103 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6764 G1 X3.313 Y39.363 E.00189 G1 X3.313 Y40.437 E.03562 G1 X3.811 Y40.437 E.01651 G1 X4.014 Y40.29 E.00832 G3 X4.959 Y40.437 I.265 J1.401 E.03235 G1 X6.087 Y40.437 E.03742 G1 X6.087 Y39.937 E.01659 ;LAYER_CHANGE ;Z:103.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;103.2 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X6.087 Y40.437 G1 X4.959 Y40.437 G1 X4.6 Y40.338 ;WIPE_END ;AFTER_LAYER_CHANGE ;103.2 ;_SET_FAN_SPEED_CHANGING_LAYER G17 G3 Z103.6 I.123 J1.211 P1 F30000 G1 X16.302 Y39.152 Z103.6 G1 Z103.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6222 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6222 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X14.059 Y31.375 Z103.6 F30000 G1 X12.195 Y-10.545 Z103.6 G1 Z103.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z103.6 F30000 G1 X3.498 Y39.152 Z103.6 G1 Z103.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:103.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;103.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;103.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z103.8 I-.104 J1.213 P1 F30000 G1 X16.302 Y39.152 Z103.8 G1 Z103.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6222 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X14.059 Y31.375 Z103.8 F30000 G1 X12.195 Y-10.545 Z103.8 G1 Z103.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z103.8 F30000 G1 X3.498 Y39.152 Z103.8 G1 Z103.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6222 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6222 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6222 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 ;LAYER_CHANGE ;Z:103.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;103.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END ;AFTER_LAYER_CHANGE ;103.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z104 I-.104 J1.213 P1 F30000 G1 X16.302 Y39.152 Z104 G1 Z103.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6587 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6587 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6587 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6587 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X14.059 Y31.375 Z104 F30000 G1 X12.195 Y-10.545 Z104 G1 Z103.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6587 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6587 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END G1 X11.227 Y-3.778 Z104 F30000 G1 X3.498 Y39.152 Z104 G1 Z103.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6587 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y-10.448 E1.69494 G1 X3.498 Y-10.448 E.01313 G1 X3.498 Y39.112 E1.644 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6587 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y-10.855 E1.72195 G1 X6.905 Y-10.855 E.13965 G1 X6.905 Y-10.545 E.01028 G1 X3.905 Y-10.545 E.09952 G1 X3.905 Y38.705 E1.63371 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6587 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y-11.29 E1.62178 G1 X7.34 Y-11.29 E.15609 G1 X7.34 Y-10.11 E.03626 G1 X4.34 Y-10.11 E.09218 G1 X4.34 Y38.27 E1.48658 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X5.66 Y30.695 Z104 F30000 G1 X3.472 Y6.205 Z104 G1 Z103.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.424703 G1 F6587 G1 X3.128 Y6.548 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y6.008 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y5.665 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y5.125 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y5.468 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y4.928 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y4.585 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y4.045 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y4.389 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y3.849 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y3.505 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y2.966 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y3.309 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y2.769 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y2.426 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y1.886 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y2.229 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y1.689 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y1.346 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y.806 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y1.149 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y.609 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y.266 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-.274 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y.069 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-.471 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-.814 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-1.354 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-1.011 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-1.551 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-1.894 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-2.434 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-2.091 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-2.63 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-2.974 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-3.514 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-3.17 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-3.71 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-4.053 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-4.593 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-4.25 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-4.79 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-5.133 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-5.673 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-5.33 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-5.87 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-6.213 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-6.753 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-6.41 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-6.95 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-7.293 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-7.833 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-7.49 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-8.03 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-8.373 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-8.913 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-8.57 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.128 Y-9.11 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.472 Y-9.453 E.0151 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.472 Y-9.993 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F6587 G1 X3.128 Y-9.649 E.0151 ;LAYER_CHANGE ;Z:103.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;103.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X3.472 Y-9.993 ;WIPE_END ;AFTER_LAYER_CHANGE ;103.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z104.2 I-1.177 J.307 P1 F30000 G1 X16.302 Y39.152 Z104.2 G1 Z103.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5106 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 X15.895 Y39.255 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5106 G1 X12.195 Y39.255 E.12274 G1 X12.195 Y38.745 E.01692 G1 X33.905 Y38.745 E.72016 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.295 E.05838 G1 X15.46 Y39.69 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5106 G1 X11.76 Y39.69 E.11369 G1 X11.76 Y38.31 E.0424 G1 X34.34 Y38.31 E.69382 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.73 E.05408 SET_VELOCITY_LIMIT ACCEL=10000 G1 X16.099 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F5106 G1 X12.399 Y39 E.03103 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X14.399 Y39 ;WIPE_END G1 X6.781 Y38.518 Z104.2 F30000 G1 X3.498 Y38.31 Z104.2 G1 Z103.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5106 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.31 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5106 G1 X3.905 Y38.745 E.01443 G1 X6.905 Y38.745 E.09952 G1 X6.905 Y39.255 E.01692 G1 X6.705 Y39.255 E.00663 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5106 G1 X7.34 Y38.31 E.09218 G1 X7.34 Y39.69 E.0424 G1 X7.14 Y39.69 E.00615 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.297 ;WIPE_END G1 X6.163 Y30.666 Z104.2 F30000 G1 X5.205 Y-10.545 Z104.2 G1 Z103.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5106 G1 X5.205 Y-10.855 E.01028 G1 X6.905 Y-10.855 E.05639 G1 X6.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.05507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5106 G1 X4.77 Y-11.29 E.03626 G1 X7.34 Y-11.29 E.07897 G1 X7.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.07774 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END G1 X12.195 Y-10.545 Z104.2 F30000 G1 Z103.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5106 G1 X12.195 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.72016 G1 X33.905 Y-10.545 E.01028 G1 X12.235 Y-10.545 E.71883 G1 X11.76 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5106 G1 X11.76 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.69382 G1 X34.34 Y-10.11 E.03626 G1 X11.8 Y-10.11 E.69259 ;LAYER_CHANGE ;Z:104 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;104 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X11.76 Y-11.29 G1 X12.579 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;104 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z104.4 I-1.198 J-.216 P1 F30000 G1 X3.498 Y39.152 Z104.4 G1 Z104 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y39.112 E1.06681 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X5.498 Y39.141 ;WIPE_END G17 G3 Z104.4 I-.168 J1.205 P1 F30000 G1 X16.302 Y40.648 Z104.4 G1 Z104 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X16.302 Y39.152 E.04962 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.342 Y40.648 E.56909 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X16.302 Y39.152 G1 X16.806 Y39.152 ;WIPE_END G17 G3 Z104.4 I.038 J-1.216 P1 F30000 G1 X3.905 Y38.745 Z104.4 G1 Z104 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X6.65 Y38.745 E.09106 G1 F2400 G1 X7.55 Y38.745 E.02985 G1 F600 G1 X7.75 Y38.745 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y38.745 E.03649 G1 X10.25 Y38.745 E.04644 G1 X11.35 Y38.745 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X11.55 Y38.745 E.00663 M106 S255 G1 F2400 G1 X12.45 Y38.745 E.02985 G1 F18000 G1 X33.65 Y38.745 E.70324 G1 X33.905 Y38.745 E.00846 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X12.45 Y39.255 E.11428 G1 F2400 G1 X11.55 Y39.255 E.02985 G1 F600 G1 X11.35 Y39.255 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X10.25 Y39.255 E.03649 G1 X8.85 Y39.255 E.04644 G1 X7.75 Y39.255 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y39.255 E.00663 M106 S255 G1 F2400 G1 X6.705 Y39.255 E.02803 G1 F18000 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.705 E1.06681 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.883 Y38.31 E.01668 G1 X6.71 Y38.31 E.05614 G1 F2400 G1 X7.55 Y38.31 E.02581 G1 F600 G1 X7.75 Y38.31 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y38.31 E.03649 G1 X10.25 Y38.31 E.04644 G1 X11.35 Y38.31 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X11.55 Y38.31 E.00615 M106 S255 G1 F2400 G1 X12.39 Y38.31 E.02581 G1 F12000 G1 X33.71 Y38.31 E.6551 G1 X34.34 Y38.31 E.01936 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X14.917 Y39.69 E.01668 G1 X12.39 Y39.69 E.07765 G1 F2400 G1 X11.55 Y39.69 E.02581 G1 F600 G1 X11.35 Y39.69 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X10.25 Y39.69 E.03649 G1 X8.85 Y39.69 E.04644 G1 X7.75 Y39.69 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y39.69 E.00615 M106 S255 G1 F2400 G1 X7.14 Y39.69 E.0126 G1 F12000 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y6.74 E.01936 G1 X4.34 Y37.7 E.95131 G1 X4.34 Y38.27 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.293 ;WIPE_END G1 X5.519 Y39.363 Z104.4 F30000 G1 Z104 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X6.087 Y39.363 E.01882 G1 X6.087 Y40.424 E.03519 G2 X5.652 Y40.3 I-.326 J.319 E.0157 G1 X5.084 Y40.437 E.01938 G1 X3.456 Y40.437 E.05401 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F12000 G1 X16.099 Y39 E.08049 G1 X16.528 Y40.437 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F16200 G1 X16.513 Y39.363 E.03562 G1 X17.053 Y39.363 E.01792 G2 X17.822 Y39.363 I.384 J-.849 E.02629 G1 X22.295 Y39.363 E.14836 G2 X23.063 Y39.363 I.384 J-.849 E.02629 G1 X27.536 Y39.363 E.14836 G2 X28.305 Y39.363 I.384 J-.849 E.02629 G1 X32.777 Y39.363 E.14836 G2 X33.287 Y39.426 I.348 J-.731 E.01734 G1 X33.287 Y40.437 E.03355 G1 X32.31 Y40.437 E.03239 G2 X31.858 Y40.3 I-.346 J.328 E.0164 G1 X31.29 Y40.437 E.01938 G1 X27.069 Y40.437 E.14003 G2 X26.617 Y40.3 I-.346 J.328 E.0164 G1 X26.049 Y40.437 E.01938 G1 X21.828 Y40.437 E.14003 G2 X21.376 Y40.3 I-.346 J.328 E.0164 G1 X20.808 Y40.437 E.01938 G1 X19.179 Y40.437 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X20.808 Y40.437 G1 X21.169 Y40.35 ;WIPE_END G1 X18.885 Y33.067 Z104.4 F30000 G1 X5.205 Y-10.545 Z104.4 G1 Z104 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F18000 G1 X5.205 Y-10.855 E.01028 G1 X5.46 Y-10.855 E.00846 G1 X6.65 Y-10.855 E.03947 G1 F2400 G1 X7.55 Y-10.855 E.02985 G1 F600 G1 X7.75 Y-10.855 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X8.85 Y-10.855 E.03649 G1 X10.25 Y-10.855 E.04644 G1 X11.35 Y-10.855 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X11.55 Y-10.855 E.00663 M106 S255 G1 F2400 G1 X12.45 Y-10.855 E.02985 G1 F18000 G1 X33.65 Y-10.855 E.70324 G1 X33.905 Y-10.855 E.00846 G1 X33.905 Y-10.545 E.01028 G1 X33.65 Y-10.545 E.00846 G1 X12.45 Y-10.545 E.70324 G1 F2400 G1 X11.55 Y-10.545 E.02985 G1 F600 G1 X11.35 Y-10.545 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X10.25 Y-10.545 E.03649 G1 X8.85 Y-10.545 E.04644 G1 X7.75 Y-10.545 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.55 Y-10.545 E.00663 M106 S255 G1 F2400 G1 X6.65 Y-10.545 E.02985 G1 F18000 G1 X5.5 Y-10.545 E.03815 G1 X5.245 Y-10.545 E.00846 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.77 Y-11.29 E.03626 G1 X5.4 Y-11.29 E.01936 G1 X6.71 Y-11.29 E.04025 G1 F2400 G1 X7.55 Y-11.29 E.02581 G1 F600 G1 X7.75 Y-11.29 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X8.85 Y-11.29 E.03649 G1 X10.25 Y-11.29 E.04644 G1 X11.35 Y-11.29 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X11.55 Y-11.29 E.00615 M106 S255 G1 F2400 G1 X12.39 Y-11.29 E.02581 G1 F12000 G1 X33.71 Y-11.29 E.6551 G1 X34.34 Y-11.29 E.01936 G1 X34.34 Y-10.11 E.03626 G1 X33.71 Y-10.11 E.01936 G1 X12.39 Y-10.11 E.6551 G1 F2400 G1 X11.55 Y-10.11 E.02581 G1 F600 G1 X11.35 Y-10.11 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X10.25 Y-10.11 E.03649 G1 X8.85 Y-10.11 E.04644 G1 X7.75 Y-10.11 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.55 Y-10.11 E.00615 M106 S255 G1 F2400 G1 X6.71 Y-10.11 E.02581 G1 F12000 G1 X5.44 Y-10.11 E.03902 G1 X4.81 Y-10.11 E.01936 ;LAYER_CHANGE ;Z:104.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;104.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;104.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z104.6 I-1.216 J-.051 P1 F30000 G1 X3.498 Y38.31 Z104.6 G1 Z104.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6025 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 M73 P99 R1 ;WIPE_START G1 F18000 G1 X3.498 Y39.152 G1 X4.616 Y39.152 ;WIPE_END G17 G3 Z104.6 I0 J1.217 P1 F30000 G1 X16.302 Y39.152 Z104.6 G1 Z104.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6025 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X18.302 Y39.187 ;WIPE_END G17 G3 Z104.6 I.074 J-1.215 P1 F30000 G1 X3.905 Y38.31 Z104.6 G1 Z104.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6025 G1 X3.905 Y38.745 E.01443 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6025 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X4.741 Y39.363 Z104.6 F30000 G1 Z104.2 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6025 G1 X6.087 Y39.363 E.04465 G3 X5.999 Y39.877 I-.721 J.141 E.01768 G2 X4.928 Y40.437 I2.673 J6.419 E.04014 G1 X3.313 Y40.423 E.05357 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6025 G1 X16.099 Y39 E.08049 G1 X17.888 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F6025 G1 X16.564 Y39.363 E.0439 G3 X16.513 Y39.794 I-.352 J.177 E.01524 G1 X16.513 Y40.437 E.02133 G1 X17.025 Y40.437 E.01699 G3 X17.097 Y39.877 I.46 J-.225 E.01983 G2 X18.091 Y39.363 I-2.448 J-5.952 E.03716 G1 X19.719 Y39.363 E.05401 G1 X19.024 Y40.437 F30000 G1 F6025 G1 X20.652 Y40.437 E.05401 G3 X21.723 Y39.877 I3.744 J5.859 E.04014 G2 X21.805 Y39.363 I-.348 J-.319 E.01829 G1 X23.332 Y39.363 E.05065 G3 X22.339 Y39.877 I-3.442 J-5.438 E.03716 G2 X22.267 Y40.437 I.388 J.335 E.01983 G1 X25.893 Y40.437 E.1203 G3 X26.964 Y39.877 I3.744 J5.859 E.04014 G2 X27.047 Y39.363 I-.348 J-.319 E.01829 G1 X28.574 Y39.363 E.05065 G3 X27.58 Y39.877 I-3.442 J-5.438 E.03716 G2 X27.508 Y40.437 I.388 J.335 E.01983 G1 X31.134 Y40.437 E.1203 G3 X32.206 Y39.877 I3.744 J5.859 E.04014 G2 X32.288 Y39.363 I-.348 J-.319 E.01829 G1 X33.287 Y39.363 E.03313 G1 X33.287 Y39.653 E.00961 G1 X32.821 Y39.877 E.01714 G2 X32.749 Y40.437 I.388 J.335 E.01983 G1 X31.338 Y40.437 E.04681 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X32.749 Y40.437 G1 X32.697 Y40.205 G1 X32.821 Y39.877 G1 X32.822 Y39.877 ;WIPE_END G1 X29.155 Y33.183 Z104.6 F30000 G1 X5.205 Y-10.545 Z104.6 G1 Z104.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F6025 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6025 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 M73 P99 R0 G1 X4.81 Y-10.11 E.90737 ;LAYER_CHANGE ;Z:104.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;104.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;104.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z104.8 I-1.216 J-.051 P1 F30000 G1 X3.498 Y38.31 Z104.8 G1 Z104.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5994 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y39.152 G1 X4.616 Y39.152 ;WIPE_END G17 G3 Z104.8 I0 J1.217 P1 F30000 G1 X16.302 Y39.152 Z104.8 G1 Z104.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5994 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X18.302 Y39.187 ;WIPE_END G17 G3 Z104.8 I.074 J-1.215 P1 F30000 G1 X3.905 Y38.31 Z104.8 G1 Z104.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5994 G1 X3.905 Y38.745 E.01443 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5994 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X4.166 Y39.363 Z104.8 F30000 G1 Z104.4 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5994 G1 X5.795 Y39.363 E.05401 G3 X5.493 Y39.877 I-.676 J-.052 E.02047 G1 X4.806 Y40.437 E.02939 G1 X3.313 Y40.437 E.04953 G1 X3.313 Y40.302 E.00448 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F5994 G1 X16.099 Y39 E.08049 G1 X16.605 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5994 G1 X18.234 Y39.363 E.05401 G1 X17.604 Y39.877 E.02697 G2 X17.292 Y40.437 I.416 J.599 E.02201 G1 X20.53 Y40.437 E.10743 G1 X21.217 Y39.877 E.02939 G2 X21.519 Y39.363 I-.374 J-.566 E.02047 G1 X23.475 Y39.363 E.0649 G1 X22.845 Y39.877 E.02697 G2 X22.533 Y40.437 I.416 J.599 E.02201 G1 X25.771 Y40.437 E.10743 G1 X26.458 Y39.877 E.02939 G2 X26.76 Y39.363 I-.374 J-.566 E.02047 G1 X28.716 Y39.363 E.0649 G1 X28.086 Y39.877 E.02697 G2 X27.774 Y40.437 I.416 J.599 E.02201 G1 X31.013 Y40.437 E.10743 G1 X31.699 Y39.877 E.02939 G2 X32.001 Y39.363 I-.374 J-.566 E.02047 G1 X33.287 Y39.363 E.04265 G1 X33.287 Y39.928 E.01874 G2 X33.016 Y40.437 I.385 J.532 E.0198 G1 X31.387 Y40.437 E.05401 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.016 Y40.437 G1 X33.067 Y40.205 G1 X33.15 Y40.1 ;WIPE_END G1 X29.463 Y33.417 Z104.8 F30000 G1 X5.205 Y-10.545 Z104.8 G1 Z104.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5994 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5994 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.90737 ;LAYER_CHANGE ;Z:104.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;104.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;104.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z105 I-1.216 J-.051 P1 F30000 G1 X3.498 Y38.31 Z105 G1 Z104.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F5924 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y39.152 G1 X4.616 Y39.152 ;WIPE_END G1 X12.248 Y39.152 Z105 F30000 G1 X16.302 Y39.152 Z105 G1 Z104.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5924 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X18.302 Y39.187 ;WIPE_END G1 X10.684 Y38.723 Z105 F30000 G1 X3.905 Y38.31 Z105 G1 Z104.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F5924 G1 X3.905 Y38.745 E.01443 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5924 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X3.967 Y39.363 Z105 F30000 G1 Z104.6 G1 E.8 F1800 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5924 G1 X5.595 Y39.363 E.05401 G3 X4.693 Y40.437 I-3.29 J-1.849 E.0468 G1 X3.313 Y40.437 E.04577 G1 X3.313 Y40.188 E.00825 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F5924 G1 X16.099 Y39 E.08049 G1 X16.731 Y39.363 F30000 ;TYPE:Sparse infill ;WIDTH:0.45 G1 F5924 G1 X18.359 Y39.363 E.05401 G2 X17.481 Y40.437 I2.177 J2.677 E.04633 G1 X20.417 Y40.437 E.09738 G2 X21.319 Y39.363 I-2.388 J-2.923 E.0468 G1 X23.601 Y39.363 E.07569 G2 X22.722 Y40.437 I2.177 J2.677 E.04633 G1 X25.658 Y40.437 E.09738 G2 X26.56 Y39.363 I-2.388 J-2.923 E.0468 G1 X28.842 Y39.363 E.07569 G2 X27.964 Y40.437 I2.177 J2.677 E.04633 G1 X30.899 Y40.437 E.09738 G2 X31.802 Y39.363 I-2.388 J-2.923 E.0468 G1 X33.287 Y39.363 E.04927 G1 X33.287 Y39.506 E.00475 G1 E-.8 F1800 ;WIPE_START G1 F16200 G1 X33.287 Y39.363 G1 X31.802 Y39.363 G1 X31.719 Y39.549 G1 X31.605 Y39.673 ;WIPE_END G1 X28.054 Y32.917 Z105 F30000 G1 X5.205 Y-10.545 Z105 G1 Z104.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 F5924 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F5924 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.90737 ;LAYER_CHANGE ;Z:104.8 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;104.8 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;104.8 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z105.2 I-1.216 J-.051 P1 F30000 G1 X3.498 Y38.31 Z105.2 G1 Z104.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y39.152 G1 X4.616 Y39.152 ;WIPE_END G1 X12.248 Y39.152 Z105.2 F30000 G1 X16.302 Y39.152 Z105.2 G1 Z104.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X18.302 Y39.187 ;WIPE_END G1 X10.684 Y38.723 Z105.2 F30000 G1 X3.905 Y38.31 Z105.2 G1 Z104.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X3.905 Y38.745 E.01443 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.906 Y39.544 Z105.2 F30000 G1 Z104.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X3.494 Y39.544 E.0741 G1 X3.494 Y40.256 E.02187 G1 X5.906 Y40.256 E.0741 G1 X5.906 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6231 G1 X5.51 Y39.9 E.04526 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6231 G1 X16.099 Y39 E.08049 G1 X16.694 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X16.694 Y40.256 E.02187 G1 X33.106 Y40.256 E.50428 G1 X33.106 Y39.544 E.02187 G1 X16.734 Y39.544 E.50306 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.05 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F6231 G1 X32.71 Y39.9 E.427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END G1 X27.266 Y33.089 Z105.2 F30000 G1 X5.205 Y-10.545 Z105.2 G1 Z104.8 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.90737 ;LAYER_CHANGE ;Z:105 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;105 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;105 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z105.4 I-1.216 J-.051 P1 F30000 G1 X3.498 Y38.31 Z105.4 G1 Z105 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y39.152 G1 X4.616 Y39.152 ;WIPE_END G1 X12.248 Y39.152 Z105.4 F30000 G1 X16.302 Y39.152 Z105.4 G1 Z105 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X18.302 Y39.187 ;WIPE_END G1 X10.684 Y38.723 Z105.4 F30000 G1 X3.905 Y38.31 Z105.4 G1 Z105 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X3.905 Y38.745 E.01443 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.906 Y39.544 Z105.4 F30000 G1 Z105 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X3.494 Y39.544 E.0741 G1 X3.494 Y40.256 E.02187 G1 X5.906 Y40.256 E.0741 G1 X5.906 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6231 G1 X5.51 Y39.9 E.04526 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6231 G1 X16.099 Y39 E.08049 G1 X16.694 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X16.694 Y40.256 E.02187 G1 X33.106 Y40.256 E.50428 G1 X33.106 Y39.544 E.02187 G1 X16.734 Y39.544 E.50306 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.05 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F6231 G1 X32.71 Y39.9 E.427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END G1 X27.266 Y33.089 Z105.4 F30000 G1 X5.205 Y-10.545 Z105.4 G1 Z105 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.90737 ;LAYER_CHANGE ;Z:105.2 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;105.2 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;105.2 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z105.6 I-1.216 J-.051 P1 F30000 G1 X3.498 Y38.31 Z105.6 G1 Z105.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y39.152 G1 X4.616 Y39.152 ;WIPE_END G1 X12.248 Y39.152 Z105.6 F30000 G1 X16.302 Y39.152 Z105.6 G1 Z105.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X18.302 Y39.187 ;WIPE_END G1 X10.684 Y38.723 Z105.6 F30000 G1 X3.905 Y38.31 Z105.6 G1 Z105.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X3.905 Y38.745 E.01443 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.906 Y39.544 Z105.6 F30000 G1 Z105.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X3.494 Y39.544 E.0741 G1 X3.494 Y40.256 E.02187 G1 X5.906 Y40.256 E.0741 G1 X5.906 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6231 G1 X5.51 Y39.9 E.04526 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6231 G1 X16.099 Y39 E.08049 G1 X16.694 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X16.694 Y40.256 E.02187 G1 X33.106 Y40.256 E.50428 G1 X33.106 Y39.544 E.02187 G1 X16.734 Y39.544 E.50306 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.05 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F6231 G1 X32.71 Y39.9 E.427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END G1 X27.266 Y33.089 Z105.6 F30000 G1 X5.205 Y-10.545 Z105.6 G1 Z105.2 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.90737 ;LAYER_CHANGE ;Z:105.4 ;HEIGHT:0.200005 ;BEFORE_LAYER_CHANGE ;105.4 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;105.4 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z105.8 I-1.216 J-.051 P1 F30000 G1 X3.498 Y38.31 Z105.8 G1 Z105.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X3.498 Y39.152 E.02793 G1 X6.298 Y39.152 E.09288 G1 X6.298 Y40.648 E.04962 G1 X3.102 Y40.648 E.10601 G1 X3.102 Y6.952 E1.11775 G1 X3.498 Y6.952 E.01313 G1 X3.498 Y38.27 E1.03887 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X3.498 Y39.152 G1 X4.616 Y39.152 ;WIPE_END G1 X12.248 Y39.152 Z105.8 F30000 G1 X16.302 Y39.152 Z105.8 G1 Z105.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X33.498 Y39.152 E.57042 G1 X33.498 Y40.648 E.04962 G1 X16.302 Y40.648 E.57042 G1 X16.302 Y39.192 E.04829 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F18000 G1 X18.302 Y39.187 ;WIPE_END G1 X10.684 Y38.723 Z105.8 F30000 G1 X3.905 Y38.31 Z105.8 G1 Z105.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 G1 F6231 G1 X3.905 Y38.745 E.01443 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X15.895 Y41.055 E.59742 G1 X15.895 Y39.255 E.05971 G1 X6.705 Y39.255 E.30485 G1 X6.705 Y41.055 E.05971 G1 X2.695 Y41.055 E.13302 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.27 E1.05238 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X34.34 Y38.31 E.92182 G1 X34.34 Y41.49 E.09771 G1 X15.46 Y41.49 E.58013 G1 X15.46 Y39.69 E.05531 G1 X7.14 Y39.69 E.25565 G1 X7.14 Y41.49 E.05531 G1 X2.26 Y41.49 E.14995 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y38.27 E.98819 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.906 Y39.544 Z105.8 F30000 G1 Z105.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X3.494 Y39.544 E.0741 G1 X3.494 Y40.256 E.02187 G1 X5.906 Y40.256 E.0741 G1 X5.906 Y39.584 E.02064 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.85 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377532 G1 F6231 G1 X5.51 Y39.9 E.04526 SET_VELOCITY_LIMIT ACCEL=10000 G1 X6.501 Y39 F30000 ;TYPE:Gap infill ;WIDTH:0.145846 G1 F6231 G1 X16.099 Y39 E.08049 G1 X16.694 Y39.544 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;TYPE:Internal solid infill ;WIDTH:0.419999 G1 F6231 G1 X16.694 Y40.256 E.02187 G1 X33.106 Y40.256 E.50428 G1 X33.106 Y39.544 E.02187 G1 X16.734 Y39.544 E.50306 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.05 Y39.9 F30000 SET_VELOCITY_LIMIT ACCEL=7000 ;WIDTH:0.377534 G1 F6231 G1 X32.71 Y39.9 E.427 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F15000 G1 X30.71 Y39.9 ;WIPE_END G1 X27.266 Y33.089 Z105.8 F30000 G1 X5.205 Y-10.545 Z105.8 G1 Z105.4 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F6231 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F6231 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.90737 ;LAYER_CHANGE ;Z:105.6 ;HEIGHT:0.199997 ;BEFORE_LAYER_CHANGE ;105.6 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END ;AFTER_LAYER_CHANGE ;105.6 ;_SET_FAN_SPEED_CHANGING_LAYER SET_VELOCITY_LIMIT ACCEL=10000 G17 G3 Z106 I-1.216 J-.05 P1 F30000 G1 X3.498 Y39.152 Z106 G1 Z105.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X33.498 Y39.152 E.99516 G1 X33.498 Y40.648 E.04963 G1 X16.15 Y40.648 E.57546 G1 F2400 G1 X15.25 Y40.648 E.02985 G1 F600 G1 X15.05 Y40.648 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X13.95 Y40.648 E.03649 G1 X8.65 Y40.648 E.17581 G1 X7.55 Y40.648 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.35 Y40.648 E.00663 M106 S255 G1 F2400 G1 X6.45 Y40.648 E.02985 G1 F18000 G1 X3.102 Y40.648 E.11106 G1 X3.102 Y6.952 E1.11776 G1 X3.498 Y6.952 E.01314 G1 X3.498 Y39.112 E1.06681 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.905 Y38.745 F30000 SET_VELOCITY_LIMIT ACCEL=5000 G1 F18000 G1 X33.905 Y38.745 E.99516 G1 X33.905 Y41.055 E.07663 G1 X33.65 Y41.055 E.00846 G1 X16.15 Y41.055 E.58051 G1 F2400 G1 X15.25 Y41.055 E.02985 G1 F600 G1 X15.05 Y41.055 E.00663 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall G1 X13.95 Y41.055 E.03649 G1 X8.65 Y41.055 E.17581 G1 X7.55 Y41.055 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall G1 X7.35 Y41.055 E.00663 M106 S255 G1 F2400 G1 X6.45 Y41.055 E.02985 G1 F18000 G1 X2.95 Y41.055 E.1161 G1 X2.695 Y41.055 E.00846 G1 X2.695 Y6.545 E1.14476 G1 X3.905 Y6.545 E.04014 G1 X3.905 Y38.705 E1.06681 G1 X4.34 Y38.31 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.883 Y38.31 E.01668 G1 X33.71 Y38.31 E.88577 G1 X34.34 Y38.31 E.01936 G1 X34.34 Y41.49 E.09771 G1 X33.71 Y41.49 E.01936 G1 X16.09 Y41.49 E.54141 G1 F2400 G1 X15.25 Y41.49 E.02581 G1 F600 G1 X15.05 Y41.49 E.00615 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Overhang wall ;WIDTH:0.45 G1 X13.95 Y41.49 E.03649 G1 X8.65 Y41.49 E.17581 G1 X7.55 Y41.49 E.03649 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Outer wall ;WIDTH:0.42 G1 X7.35 Y41.49 E.00615 M106 S255 G1 F2400 G1 X6.51 Y41.49 E.02581 G1 F12000 G1 X2.89 Y41.49 E.11123 G1 X2.26 Y41.49 E.01936 G1 X2.26 Y6.11 E1.08713 G1 X4.34 Y6.11 E.06391 G1 X4.34 Y6.74 E.01936 G1 X4.34 Y37.7 E.95131 G1 X4.34 Y38.27 E.01751 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X6.34 Y38.273 ;WIPE_END G1 X5.387 Y40.215 Z106 F30000 G1 Z105.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2500 ;TYPE:Bridge G1 F1500 G1 X17.043 Y40.215 E.35815 G2 X17.041 Y39.838 I-4.306 J-.168 E.01159 G1 X5.559 Y39.838 E.35283 G1 X5.627 Y39.461 E.01177 G1 X17.15 Y39.461 E.35408 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F1500 G1 X15.15 Y39.461 ;WIPE_END G17 G3 Z106 I-.121 J-1.211 P1 F30000 G1 X4.526 Y40.524 Z106 G1 Z105.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;TYPE:Top surface ;WIDTH:0.448982 G1 F12000 M106 S255 G1 X5.367 Y39.683 E.03935 SET_VELOCITY_LIMIT ACCEL=10000 G1 X5.199 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.951 Y40.524 E.05836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X3.377 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X4.624 Y39.276 E.05836 SET_VELOCITY_LIMIT ACCEL=10000 G1 X4.05 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X3.226 Y40.1 E.03854 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.05 Y39.276 ;WIPE_END G17 G3 Z106 I-.053 J1.216 P1 F30000 G1 X32.587 Y40.524 Z106 G1 Z105.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=2000 ;WIDTH:0.431293 G1 F12000 G1 X33.374 Y39.737 E.03519 SET_VELOCITY_LIMIT ACCEL=10000 G1 X33.285 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X32.038 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.489 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X32.736 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X32.187 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X30.94 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X30.39 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X31.637 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X31.088 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X29.841 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.292 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X30.539 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X29.99 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.743 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.193 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X29.44 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X28.891 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.644 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.095 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X28.342 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X27.793 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.546 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.996 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X27.244 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X26.694 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.447 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.898 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X26.145 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X25.596 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X24.349 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.799 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X25.047 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X24.497 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.25 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.701 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X23.948 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X23.399 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.152 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.602 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X22.85 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X22.3 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.053 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.504 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X21.751 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X21.202 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.955 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.406 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X20.653 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X20.103 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.856 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X18.307 Y40.524 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X19.554 Y39.276 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X19.005 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.758 Y40.524 E.05582 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.251 Y40.482 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X18.456 Y39.276 E.05394 SET_VELOCITY_LIMIT ACCEL=10000 G1 X17.906 Y39.276 F30000 SET_VELOCITY_LIMIT ACCEL=2000 G1 F12000 G1 X17.251 Y39.932 E.02936 SET_VELOCITY_LIMIT ACCEL=10000 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X17.906 Y39.276 ;WIPE_END G1 X16.021 Y31.881 Z106 F30000 G1 X5.205 Y-10.545 Z106 G1 Z105.6 G1 E.8 F1800 SET_VELOCITY_LIMIT ACCEL=5000 ;TYPE:Inner wall ;WIDTH:0.45 G1 F18000 G1 X5.205 Y-10.855 E.01028 G1 X33.905 Y-10.855 E.95203 G1 X33.905 Y-10.545 E.01028 G1 X5.245 Y-10.545 E.9507 G1 X4.77 Y-10.11 F30000 ;TYPE:Outer wall ;WIDTH:0.42 G1 F12000 G1 X4.77 Y-11.29 E.03626 G1 X34.34 Y-11.29 E.9086 G1 X34.34 Y-10.11 E.03626 G1 X4.81 Y-10.11 E.90737 G1 E-.8 F1800 ;WIPE_START G1 F12000 G1 X4.77 Y-11.29 G1 X5.589 Y-11.29 ;WIPE_END M106 S0 M106 P2 S0 ;TYPE:Custom ; filament end gcode G1 E-3 F3600 G0 X50 Y50 F30000 M104 S0 ; turn off temperature M73 P100 R0 ; EXECUTABLE_BLOCK_END